Caterpillar Part reference

0951730seal-o-ring (id=179.30mm)

This Caterpillar catalog listing covers part number 0951730, recorded as a seal-o-ring with an inside diameter of 179.30mm. It appears in the catalog within the hydraulic system for the Caterpillar 3066 under tank and mounting or tank and filter groupings, but these are catalog associations and should be checked against the recorded conditions before ordering.

Recorded applications

Models and catalog references

Selected catalog references that list this part. A catalog association does not confirm fitment for every machine or configuration.

  • Caterpillar 3066
  • Caterpillar C15
  • Caterpillar C6
& More catalog references

Catalog context

Where this part appears

  1. ModelCaterpillar 3066
    Browse Caterpillar models
  2. Grouphydraulic system
  3. Subgrouptank & filter group-hydraulic
  4. Unit199-1672 tank & filter gp-hydraulic s/n btg486-up; dah1212-up 220-l (58.1-us gal) part of 199-1671 tank & mtg gp-hydraulic
Reduced catalog diagram for Caterpillar 3066 Locked
Diagram previewReduced catalog thumbnail
About diagram access

Check the signed-in Part Book for available diagrams and the complete catalog breakdown.

Parts in this preview

Selected records
Selected catalog parts, with other part numbers masked
Part numberDescription
09***26lockwasher-tooth; (m4 id)
09***08seal-o-ring (id=44.70mm)
0951730seal-o-ring (id=179.30mm) (current part)
10***02kit-receptacle; (2-pin)(engine sensor wiring harness)

Selected entries from this catalog unit. Other part numbers are masked. Confirm the full breakdown and your machine configuration before ordering.

Browse Caterpillar models

General guidance

Component knowledge

Understanding this component

In general, an O-ring is a sealing element, usually a circular elastomer ring, used to stop fluid or pressure from leaking between two surfaces. The inside diameter is the measurement across the open center of the ring, which is one of the key values used to identify the correct sealing ring for a given location.

What to check before ordering

Reference part number 0951730 exactly as listed. Before ordering, compare the recorded 179.30mm inside diameter against the original seal and confirm the associated catalog conditions for your machine's configuration, since catalog associations do not establish compatibility for every configuration.