Caterpillarexcavator
Caterpillar 350
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 350 is a large hydraulic excavator in Cat's roughly 48-50 tonne production class, built through the 1990s around the mechanically-governed Cat 3306 ATAAC diesel, a turbocharged, air-to-air aftercooled 10.5 L inline-six rated around 213 kW (286 hp). Cat built it in two undercarriage lengths: the standard 350 (serial prefixes 2ZL, 3ML, 7RK, 8HK) and the longer-undercarriage 350 L (8KZ, 9DK, 9FL), with operating weight running roughly 48-49 tonnes depending on undercarriage, boom/stick combination, and counterweight fitted. Production ran from the early-to-mid 1990s into 1998, part of Cat's long-running large-excavator lineup, before giving way to the 345B platform Cat introduced that same year. Cat sold the 350/350L with several front-end configurations: mass-excavation boom and stick combinations for standard digging, longer-reach sticks for extra depth, and reinforced demolition fronts for hammer, shear, and multi-processor attachments, all built around the F-linkage stick and link-pin sizing later carried into the 345B/345B L/345C L family.
Across its production run the 350/350L saw the running changes typical of an early-1990s Cat large excavator: refinements to ATAAC boost piping, hydraulic calibration, and cab and monitoring hardware, while the core mechanical-injection 3306 powertrain and F-linkage front end stayed consistent, so parts generally interchange across the serial-prefix range within each undercarriage length. Caterpillar has not carried the 350 nameplate continuously. After retiring this platform for the 345B in 1998, the number sat unused until Caterpillar revived it in 2022 for a completely different, electronically-controlled Next Generation excavator built around the C9.3B engine, a machine with no parts or design lineage to this one. In today's used and parts market the classic 350/350L is a legacy machine: values track hour meter, undercarriage condition, and hydraulic pump health rather than any resale premium, and its mechanical fuel system and simple analog Monitoring System make it a straightforward rebuild candidate for owners avoiding electronic control complexity. Its F-linkage front end also keeps buckets and attachments cross-compatible with the 345B-family excavators that followed it, which helps keep parts supply active.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 350 specifications
Engine
| Engine model | Cat 3306 ATAAC (dealer literature also shows 3306B ATAAC) — turbocharged, air-to-air aftercooled inline-6 diesel |
| Power (gross, flywheel) | 213 kW (286 hp); classic-era literature does not publish a separate net rating for this machine |
| Displacement | 10.5 L (640.8 cu in) |
| Cylinders | 6, inline (3306 family bore 120.7 mm / stroke 152.4 mm) |
| Fuel system | Mechanical, governor-controlled fuel-injection pump (Governor Gp / Fuel Ratio Control Gp); no electronic control module |
| Emissions | Pre-electronic, mechanical-injection generation; no EGR, no DEF/SCR aftertreatment |
Weights
| Operating weight — 350 (standard undercarriage) | approx. 48,040 kg (105,910 lb) |
| Operating weight — 350 L (long undercarriage) | approx. 49,010 kg (108,050 lb); dealer resale listings show individual units around 49,020 kg (108,070 lb) depending on attachments |
Dimensions
| Transport length | approx. 12.2 m (40 ft), both configurations |
| Transport width (outside of tracks) | 350: 3.2 m (10.5 ft) with 600 mm shoes; 350 L: 3.3 m (10.8-10.9 ft) with 750 mm shoes |
| Transport height | approx. 3.73-4.0 m (12.2-13.2 ft); varies with boom stow position and counterweight fitted |
| Tail swing radius | 3.58-3.60 m (11.75-11.8 ft), both configurations |
| Track shoe width (standard) | 350: 600 mm (23.6 in) double-grouser; 350 L: 750 mm (29.5 in) double-grouser |
| Ground clearance | 0.73 m (2.4 ft), both configurations |
| Track gauge (centerline) | approx. 2.55-2.56 m (8.37-8.4 ft) |
| Track length on ground | 350: 4.05 m (13.3 ft); 350 L: 4.51 m (14.74-14.8 ft) — the longer track base is the defining L-variant feature |
| Height to top of cab | 3.50-3.51 m (11.49-11.5 ft) |
Performance
| Max digging depth | 6.75-9.57 m (22.15-31.4 ft), depending on boom/stick combination |
| Max reach along ground | 10.68-13.45 m (35.0-44.2 ft), depending on boom/stick combination |
| Max cutting height | 10.7-12.07 m (35.1-39.6 ft), depending on boom/stick combination |
| Max travel speed | 4.6-4.7 km/h (2.86-2.9 mph) |
| Drawbar pull | 336 kN (75,600 lbf) |
Service capacities (summary)
| Fuel tank | 700 L (185 US gal) |
| Hydraulic system | 520 L (137 US gal) total, hydraulic tank 240 L (63.4 US gal); pump flow 770 L/min (203.5 US gal/min) at a relief pressure of about 343 bar (4,980 psi) |
| Engine oil (crankcase, with filter) | 27-30 L (7.1-7.9 US gal) |
| Cooling system | 73 L (19.2 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
350 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 27-30 L (7.1-7.9 US gal) | Cat DEO (Diesel Engine Oil), multigrade. SAE 15W-40 covers most temperate ranges (-15°C to 45°C / 5°F to 113°F); SAE 10W-30 for wider cold-to-moderate spans; single-grade SAE 30 or SAE 40 for consistently warm climates; SAE 0W-20/0W-30 or 10W below -20°C (-4°F). |
| Cooling system | 73 L (19.2 US gal) | Cat factory-fill ethylene glycol coolant - Cat Diesel Engine Antifreeze/Coolant (DEAC), or Cat Extended Life Coolant (ELC) as the extended-service alternative. Mix ratio and glycol concentration selected for the lowest expected ambient temperature; roughly 1:1 water/glycol for moderate climates, higher glycol fraction for extreme cold. |
| Fuel tank | 700 L (185 US gal) | No. 2-D diesel fuel meeting Caterpillar's standard fuel specification for this engine. No. 1-D or a winter-blend diesel recommended in cold climates to prevent fuel waxing. |
| Hydraulic system (total, including tank) | 520 L (137 US gal) | Cat HYDO or Cat TDTO. SAE 10W for -20°C to 40°C (-4°F to 104°F); SAE 20W for -5°C to 45°C (23°F to 113°F); SAE 30 for 0°C to 50°C (32°F to 122°F) - grade selected by expected ambient range per the OMM viscosity chart. |
| Hydraulic tank | 240 L (63.4 US gal) | Same Cat HYDO or Cat TDTO fluid and viscosity-by-climate selection as the hydraulic system total. |
| Final drive (each) | 16 L (4.2 US gal) | Cat TDTO (Transmission/Drive Train Oil, TO-4 spec). SAE 30 for 0°C to 50°C (32°F to 122°F); SAE 40/50 for consistently hot climates; SAE 10W or 0W-20 cold-weather grade below -20°C (-4°F). |
| Swing drive | 8 L (2.1 US gal) | Cat TDTO (TO-4 spec), same grade-by-climate selection as the final drives. |
| Pilot/other circuits | No separate reservoir - pilot, swing, and travel control circuits draw from the main hydraulic tank on this platform. | Same fluid as the hydraulic system - Cat HYDO or Cat TDTO, viscosity selected per the OMM chart. |
| Grease (spec only) | Spec only - no reservoir capacity; applied at grease points per the scheduled lubrication interval. | Cat Extreme Application Grease (NLGI 2, tackified, high-moly) for the swing gear/bearing and other heavily loaded, exposed pin joints; Cat Multipurpose Grease (MPGM), NLGI 2, lithium-complex, for general chassis, pin, and bucket-linkage points. Cold-climate machines may use the Extreme Application Grease-Arctic variant; hot/desert climates the -Desert variant. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 350 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 350 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S sampling on engine, hydraulic, swing drive, and final drive oil every 250-500 hours; it is the only real diagnostic layer on this machine, since the mechanical 3306 and analog Monitoring System give no fault codes. Watch hydraulic samples closely: with main pump flow around 770 L/min at roughly 34,300 kPa relief, abrasive contamination shows up fast in pump and valve wear. Track coolant condition on Cat DEAC/ELC to catch liner cavitation and radiator corrosion before they turn into a rebuild.
Corrective & Common Repairs
Turbocharger and ATAAC boost-piping leaks are the most common driveline complaint on a 3306 this age; boost hose clamps and elbows crack from heat cycling. Injection pump and injector wear shows up as hard starting and smoke, correctable through recalibration since there is no ECM to reflash. On the hydraulic side, main pump and swing motor seal replacement is the typical high-hour repair given the F-linkage front end's demolition-duty history. Cracked stick and bucket pin bosses are common on machines run with hammers or shears.
Overhaul & Rebuild Points
Undercarriage is usually the first major rebuild item; sprockets, rollers, idlers, and track pads wear hard under a 48-49 tonne class machine, especially on the 350 L's longer chain. Main hydraulic pump and swing or travel motor rebuilds follow once flow drops off relief spec. On the engine side, plan a 3306 ATAAC top-end or inframe rebuild around injector, turbo, and valve-train wear rather than a fixed hour number, with S.O.S trending driving the call. Check swing bearing bolt torque and backlash at every major rebuild.
Seasonal & Environment Servicing
Cold-weather starts on the mechanical 3306 depend on glow-plug or ether-start condition and correct-grade Cat DEO; thin the crankcase oil and check coolant freeze protection (Cat DEAC/ELC) before winter. On hot, dusty sites, service the air cleaner and ATAAC cooler fins more often than the base 500-hour interval, since airflow restriction hurts a turbocharged mechanical engine's fuel ratio control. Wet or abrasive digging shortens track pad, bushing, and pin-boss life, so tighten the grease interval on boom, stick, and bucket linkage accordingly.
350 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0750 | Filter As-Fuel | Fuel system service | Check fitment → |
| 106-3969 | Filter Element As-Air | Air intake service | Check fitment → |
| 106-3973 | Filter Element As-Air | Air intake service | Check fitment → |
| 108-0688 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
350 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine Oil Pressure indicator (red lamp, audible action alarm) | Engine oil pressure has dropped below the safe operating threshold monitored by the gauge cluster. | Low oil level, worn oil pump, plugged suction screen, or a failed oil pressure sending unit. | Stop the engine immediately, check oil level and condition, inspect the pressure sender and wiring before restarting. |
| Engine Coolant Temperature indicator (amber/red gauge segment, audible action alarm) | Coolant temperature has reached the overheat threshold recognized by the monitoring system. | Low coolant level, blocked radiator core, slipping or broken fan belt, or a stuck thermostat. | Reduce load, let engine idle down, then check coolant level, radiator for debris, and belt condition once safe to inspect. |
| Hydraulic Oil Temperature indicator (red gauge segment, audible action alarm) | Hydraulic oil temperature has exceeded the normal operating range. | Low hydraulic oil level, restricted or dirty oil cooler, or a relief valve holding pressure too long. | Reduce machine operating speed and hold engine at low idle until temperature drops; if it stays lit, stop and check oil level and cooler for restriction. |
| Battery/Charging indicator (amber lamp) | Alternator output or system voltage is below the normal charging range. | Worn or broken alternator belt, faulty alternator, or loose/corroded battery and charging connections. | Check belt tension and condition, inspect alternator output, and clean/tighten battery terminals and charging leads. |
| Fuel Level indicator (low fuel lamp) | Fuel level has dropped below the reserve threshold monitored by the sender. | Fuel genuinely low, or a faulty fuel level sending unit giving a false reading. | Refuel; if the lamp stays on after a full tank, check the fuel level sender and wiring. |
| Action Alarm (audible buzzer, Level 2 caution) | A secondary-level warning that any monitored gauge parameter (oil pressure, coolant temp, hydraulic temp, charging) has moved into its caution range. | Depends on which gauge segment or lamp is lit at the time the alarm sounds; the buzzer itself does not identify the specific fault. | Check the instrument cluster to identify which parameter triggered the alarm, then follow that indicator's specific response. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
350 attachments & work tools
Buckets
Shares its bucket linkage (aftermarket charts call it F-linkage, 100 mm stick pin / 80 mm link pin) with the 345B/345BL/345CL family; factory standard GP bucket is 2.5 m3 (3.3 yd3), GP ceiling on this linkage runs up to about 3.4 m3 (4.5 yd3), and HD/rock buckets on the same linkage run smaller for a given width, roughly 2.3-2.5 m3 (3.0-3.3 yd3) with widths generally 1.4-1.8 m (54-72 in).
Hydraulic hammers
No factory-named hammer model is documented for this machine specifically. Independent hammer-sizing guidance for this carrier-weight class (roughly 48-49 t) places a matched hammer service weight around 4-6 t (roughly 8-15% of carrier weight) — confirm against the hammer maker's own carrier-weight and flow/pressure chart, varies by brand.
Quick couplers
Hydraulic pin-grabber couplers are the standard quick-attach style for this size class on the F-linkage pins, replacing the factory bucket/link pins on the stick; manual wedge-style couplers are also used in the field but are less common at this weight class.
Thumbs/grapples
Hydraulic thumbs are a documented factory/field-fit option on the 345BL/350L family mounted alongside the bucket linkage, and tine-style grapples for log, brush, and general material handling are built specifically for the same 345BL/CL/350L linkage group.
Rippers
A single-shank ripper is documented as a direct fit for the 345BL/CL/350L family, mounted on the stick in place of or alongside the bucket linkage for breaking hard ground, frozen material, or light rock ahead of digging.
Hydraulic-kit notes
Main pump flow is about 770 L/min (203.5 gal/min) at roughly 34,300 kPa (4,980 psi) relief, the figure used to size hammer and other powered-tool circuits. Running a hammer, thumb, or grapple needs an auxiliary tool-control circuit (high-pressure for the hammer, a second lower-pressure line if a rotating/tilting tool is fitted) — verify whether a given machine already carries this circuit or needs a dealer-installed kit.
All 350 assemblies by section
Every catalogued assembly group for the Caterpillar 350. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
108-9633 Air Cleaner Gp
| 10***28 | Air Cleaner Group | 1 |
| 10***33 | Air Cleaner Group | 1 |
| 12***37 | Precleaner As; -Air Cleaner-Air Inlet | 1 |
102-3928 Air Cleaner Gp
| 10***88 | Cover As | 1 |
| 10***28 | Air Cleaner Group | 1 |
| 10***69 | Filter Element As-Air; (Primary) | 1 |
7e-9167 Cartridge Gp-Turbocharger
| 4M***13 | Ring,Retaining | 1 |
| 4N***97 | Bearing Assem. | 1 |
| 4W***42 | Nut | 1 |
7c-4784 Lines Gp-Air
| 2N***66 | Locknut; (3/8-16-Thd)(High Temperature) | 2 |
| 5L***55 | Seal Ring-Metal-Turbo To Coupling | 2 |
| 7C***83 | Support-Exhaust | 1 |
4p-5668 Lines Gp-Air
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 7 |
| 2B***04 | Clip (1.062" Long); (1/4 In Id Opening) | 2 |
| 2H***55 | Bolt 15.88mm(.625in.); 1.59cm(.62in.)Lg. | 2 |
7y-1815 Lines Gp-Air
| 7Y***32 | Clamp As | 2 |
| 7Y***27 | Bolt; (M12x1.75x60-mm) | 4 |
| 7Y***29 | Gasket | 2 |
7y-1816 Lines Gp-Air
| 10***22 | Hose-Supply | 1 |
| 11***16 | Hose-Return | 1 |
| 7C***34 | Hose; (Outlet) | 2 |
108-9634 Lines Gp-Air
| 09***28 | Indicator-Air Filter Change; (Air Filter Service) | 1 |
| 10***80 | Hose-Air | 1 |
| 10***34 | Lines Group-Air | 1 |
108-1092 Lines Gp-Air
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 10***92 | Lines Group-Air | 1 |
| 4L***37 | Seal To Aftercooler Elbow | 2 |
7y-1660 Lines Gp-Muffler Drain
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
| 5P***43 | Hose 34 cm (13.39 In.) | 0 |
| 7Y***29 | Connector | 1 |
9l-5805 Manifold Gp-Exhaust
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 2 |
| 1W***48 | Support Assem. | 1 |
| 2N***66 | Locknut; (3/8-16-Thd)(High Temperature) | 12 |
120-6622 Manifold Gp-Exhaust
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 4 |
| 12***22 | Manifold Group-Exhaust | 1 |
| 1W***48 | Support Assem. | 1 |
7y-1654 Muffler Gp
| 6F***15 | Clamp Pipe To Muffler | 1 |
| 6I***49 | Bracket As | 1 |
| 7Y***15 | Pipe As-Tail | 1 |
253-4394 Muffler-Converter
| 25***94 | Muffler-Converter | 1 |
124-3237 Precleaner Gp -Air Cleaner
| 12***37 | Precleaner As; -Air Cleaner-Air Inlet | 1 |
| 5P***99 | Clamp; (Hose) | 1 |
| 6H***21 | Body-Pre-Cleaner | 1 |
4h-5076 Precleaner Gp -Air Cleaner
| 4H***76 | Precleaner Group | 1 |
| 6H***21 | Body-Pre-Cleaner | 1 |
| 6H***81 | Sleeve As. Including: | 1 |
5l-7942 Precleaner Gp -Air Cleaner
| 5L***42 | Precleaner Group; -Air Cleaner | 1 |
| 6H***21 | Body-Pre-Cleaner | 1 |
| 9M***01 | Cover Assembly | 1 |
6i-3739 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 5S***17 | Clamp As; (Turbine)(Turbine) | 1 |
| 6I***39 | Turbocharger Group | 1 |
120-6611 Turbocharger Gp
| 12***11 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
| 21***10 | Turbocharger Group | 1 |
219-9710 Turbocharger Gp
| 21***14 | Cartridge Group-Turbocharger | 1 |
| 21***15 | Cover; (Compressor) | 1 |
| 21***10 | Turbocharger Group | 1 |
118-2284 Turbocharger Gp
| 11***68 | Housing (Turbine) | 1 |
| 11***19 | Cartridge Group-Turbocharger | 1 |
| 11***84 | Turbocharger Group | 1 |
6i-3740 Turbocharger Gp
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
| 2N***66 | Locknut; (3/8-16-Thd)(High Temperature) | 4 |
| 6I***39 | Turbocharger Group | 1 |
Basic Engine
2w-7458 Crankshaft As
| 1W***05 | Gear-Crankshaft; (40-Teeth) | 1 |
| 2P***59 | Sleeve Crankshaft Assembly | 1 |
| 2W***58 | Crankshaft As | 1 |
2p-6200 Fastener Gp-Oil Pan
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 18 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 16 |
9y-0066 Fastener Gp-Oil Pan
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 20 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 5 |
100-7617 Belt Tensioner Gp
| 10***17 | Belt Tensioner Group; Belt Tightener Gp | 1 |
| 10***18 | Bracket | 1 |
| 12***69 | Belt Tensioner | 1 |
1n-4406 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 1N***06 | Camshaft Group-Single; Camshaft Group--Single | 1 |
| 7E***80 | Camshaft | 1 |
4p-2474 Cover Gp-Cylinder Block
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 3J***19 | Plug | 1 |
3n-4923 Cover Gp-Front Housing
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 4 |
| 2P***20 | Gasket-- Front Cover | 1 |
| 2S***41 | Plug 2.14 In. (5.43 cm) Diameter | 1 |
4n-5162 Cover Gp-Front Housing
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 1W***42 | Housing,Coolant Pum Timing Cover | 1 |
| 2P***20 | Gasket-- Front Cover | 1 |
134-0664 Cover Gp-Front Housing
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 4 |
| 13***64 | Cover Group-Front Housing | 1 |
| 2P***20 | Gasket-- Front Cover | 1 |
9y-4721 Cover Gp-Front Housing
| 2P***20 | Gasket Cover,Timing Cover | 1 |
| 2P***00 | Bolt Tube Assembly To Plate--.75 In. (19.0 mm) | 2 |
| 4N***26 | Cover,Access Timing Gear Cover | 1 |
8n-4745 Cover Gp-Valve Mechanism
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 15 |
| 13***47 | Seal-Integral; (Valve Cover) | 1 |
| 2W***86 | Cover As-Cylinder Head | 1 |
6i-4560 Cover Gp-Valve Mechanism
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 15 |
| 13***47 | Seal-Integral; (Valve Cover) | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
6n-8079 Crankshaft Gp
| 10***52 | Plate-Thrust | 2 |
| 19***34 | Kit-Basic Engine Repair; (Main Bearing)(Crankshaft) | 0 |
| 23***33 | Bearing-Main; (Standard)(Standard) | 7 |
4p-9856 Crankshaft Gp
| 10***52 | Plate-Thrust | 2 |
| 19***34 | Kit-Basic Engine Repair; (Main Bearing)(Crankshaft) | 0 |
| 23***33 | Bearing-Main; (Standard)(Standard) | 7 |
7n-6550 Cylinder Block Gp
| 10***12 | Insert; (Liner Seat) (.822-mm Thk) | 0 |
| 10***18 | Insert; (Liner Seat) (1.605-mm Thk) | 0 |
| 10***27 | Insert-Liner Seat (2.710mm Thk) | 0 |
8n-5286 Cylinder Block Gp
| 11***50 | Gasket-Plate | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
| 3S***96 | Seal-O-Ring; (9.53mm Id) | 1 |
1n-3576 Cylinder Block Gp
| 1N***76 | Cylinder Block Group | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 14 |
8n-0246 Cylinder Head Gp
| 10***60 | Valve (Intake) | 6 |
| 10***65 | Insert-Valve Seat; (Exhaust)(Standard) | 6 |
| 10***68 | Insert-Valve Seat; (Inlet)(Standard) | 6 |
8n-6796 Cylinder Head Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 10***65 | Insert-Valve Seat; (Exhaust)(Standard) | 6 |
| 10***68 | Insert-Valve Seat; (Inlet)(Standard) | 6 |
9n-5760 Damper Gp
| 1W***78 | Spring; (35.7mm Long) | 2 |
| 1W***79 | Spring; (54.6mm Long) | 2 |
| 4B***73 | Screw-Machine; (10-24x0.5-In) | 2 |
4p-7504 Damper Gp
| 16***23 | Damper Assem. | 1 |
| 1N***75 | Adapter-Damper | 1 |
| 4P***04 | Damper Group | 1 |
7c-2162 Drive Gp-Auxiliary -Lower
| 1W***54 | Adapter-Auxiliary Drive | 1 |
| 2H***76 | Locknut | 1 |
| 2H***79 | Lockwasher | 1 |
120-6618 Drive Gp-Auxiliary
| 12***18 | Drive Group-Auxiliary; (Auxiliary) | 1 |
| 12***19 | Gear; (33-Teeth) | 1 |
| 1W***54 | Adapter-Auxiliary Drive | 1 |
100-7622 Drive Gp-Fan
| 10***22 | Drive Group-Fan | 1 |
| 10***78 | Pulley | 1 |
| 11***52 | Belt-Serpentine | 1 |
100-7612 Drive Gp-Fan
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 6 |
| 10***12 | Drive Group-Fan | 1 |
7n-9536 Fastener Gp-Cylinder Head
| 1B***09 | Bolt-- Head To Cylinder Block | 5 |
| 1D***95 | Bolt (5/8-11x6in); (5/8-11x6-In) | 20 |
| 2S***36 | Washer,Flat Cover Assembly Mounting And Flywheel Housing Cover | 25 |
8n-0872 Fastener Gp-Front Housing
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 20 |
| 1C***51 | Bolt--Installation Of 2v***26 Retainer | 2 |
| 3E***14 | Bolt; (3/8-16x0.87-In) | 6 |
4p-2703 Flywheel Gp
| 0S***18 | Bolt (3.25" Long) | 9 |
| 4P***03 | Flywheel Group | 1 |
| 4P***31 | Flywheel Assem. | 1 |
4p-9858 Gear Gp-Front
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 0S***48 | Bolt,Machine Camshaft Gear Mounting | 4 |
1w-4563 Gear Gp-Front
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 0S***48 | Bolt,Machine Camshaft Gear Mounting | 4 |
4p-2704 Gear Gp-Rear
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 8 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 6 |
| 16***73 | Shaft-Idler Gear | 2 |
4p-2702 Housing Gp-Flywheel
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 5 |
| 1A***22 | Bolt-Generator To Flywheel Housing | 3 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 6 |
8n-0303 Housing Gp-Front
| 1W***00 | Gasket Timing Gear Cover | 1 |
| 1W***16 | Plate As-Front | 1 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 1 |
2p-8598 Hub Gp-Crankshaft
| 2P***98 | Hub Group-Crankshaft; Crankshaft Hub Group | 1 |
| 5S***48 | Washer-Special | 1 |
| 7B***63 | Screw,Cap,Hexagon Head Pulley Mtg | 1 |
9y-2062 Lifting Gp-Engine
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 4B***23 | Bolt 3.18 cm(1.25 In.)Long | 4 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
7y-1659 Mounting Gp-Engine
| 7X***66 | Capscrew; (Hex Hd) (3/4-10x2 Gd 8 Z) (Current Adapters) | 8 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 8 |
| 7X***67 | Bolt-Plt; (M24 X 3.0 X 160) | 6 |
7e-4236 Pan Gp-Oil
| 12***45 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 16***99 | Gasket-Oil Pan | 1 |
| 16***00 | Gasket; (Oil Pan) | 1 |
9y-8219 Piston & Rod Gp
| 1P***56 | Bolt,Shoulder Connecting Rod | 2 |
| 1S***43 | Ring,Retaining Piston Pin | 2 |
| 32***72 | Bearing-Connecting Rod; (Standard) | 1 |
168-4530 Piston & Rod Gp
| 16***30 | Piston & Rod Group | 1 |
| 16***31 | Body As-Piston | 1 |
| 1P***56 | Bolt,Shoulder Connecting Rod | 2 |
9y-8218 Piston Gp
| 15***62 | Body As-Piston | 1 |
| 2W***07 | Ring - Piston (Top) | 1 |
| 2W***08 | Ring-Piston; (Intermediate) | 1 |
4p-8086 Pulley Gp-Crankshaft
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 4P***91 | Pulley | 1 |
| 4P***86 | Pulley Group-Crankshaft | 1 |
2p-6224 Seal Gp-Crankshaft
| 2P***24 | Seal Group-Crankshaft; Crankshaft Seal Group | 1 |
| 4W***52 | Seal Group-Crankshaft; (Counter Clockwise Rotation) | 1 |
| 9Y***95 | Seal Group-Crankshaft; (Clockwise Rotation) | 1 |
4p-5817 Support Gp-Engine
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 4P***06 | Support As-Engine | 1 |
| 4P***17 | Support Group-Engine | 1 |
8n-0107 Trunnion Gp-Engine
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 6 |
| 2P***87 | Ring | 1 |
| 2P***92 | Seal (Id=133.02mm) | 1 |
7c-7013 Valve Mechanism Gp
| 1B***09 | Bolt-- Head To Cylinder Block | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 2S***36 | Washer,Flat Cover Assembly Mounting And Flywheel Housing Cover | 1 |
7n-8026 Valve Mechanism Gp
| 5S***18 | Push Rod,Engine Pop Valve Lifter | 12 |
| 7C***13 | Valve Mechanism Group | 1 |
| 7N***26 | Valve Mechanism Group; Valve Mechanism Group | 1 |
Cooling System
155-0061 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 14***91 | Shaft-Water Pump | 1 |
2w-8001 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 13***22 | Impeller-Pump | 1 |
4p-9861 Pump Gp-Water
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
| 15***61 | Pump Group-Water | 1 |
| 4P***61 | Pump Group-Water | 1 |
4p-9862 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 13***22 | Impeller-Pump | 1 |
172-7760 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 15***82 | Seal-Lip Type | 1 |
| 16***50 | Seal Group; (Water Pump) | 1 |
7n-5909 Pump Gp-Water
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
| 2W***01 | Pump Group-Water | 1 |
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
4p-7094 Cooler Gp-Fltr Base & Eng Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 2W***61 | Gasket | 1 |
| 4P***94 | Cooler Group-Filter Base & Eng Oil | 1 |
4p-7095 Cooler Gp-Fltr Base & Eng Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
112-2979 Cooling Ar
| 10***22 | Drive Group-Fan | 1 |
| 10***07 | Door Group-Access | 1 |
| 11***79 | Cooling Ar | 1 |
7y-1994 Fan Gp-Suction
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 6 |
| 4N***92 | Spider As; (8-Blade) | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 6 |
102-2769 Housing & Regulator Gp
| 10***69 | Housing & Regulator Group | 1 |
| 11***10 | Regulator-Water Temperature; (91 Deg Celsius) | 1 |
| 1W***10 | Pipe-Outlet | 1 |
7y-1818 Lines Gp-Water
| 5P***68 | Clamp-Hose; (Us Sourced) | 4 |
| 7Y***18 | Lines Group-Water | 1 |
| 7Y***95 | Hose-Radiator; (Upper) | 1 |
8n-4112 Lines Gp-Water
| 7N***72 | Elbow | 1 |
| 7X***31 | Plug-Pipe; (Flywheel Housing Drain) | 3 |
| 8N***12 | Lines Group-Water; -Bypass Relief | 1 |
2w-6779 Lines Gp-Water
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 1 |
7y-1657 Radiator & Hyd Oil Cooler Gp
| 09***61 | Strap; (Cable) | 2 |
| 10***15 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 10***41 | Guard As | 2 |
128-9098 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 2 |
| 09***01 | Cap-Radiator | 1 |
| 10***18 | Shroud As | 1 |
118-9913 Radiator & Hyd Oil Cooler Gp
| 11***13 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 12***97 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 12***98 | Radiator & Hydraulic Oil Cooler Group | 1 |
128-9097 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 2 |
| 09***01 | Cap-Radiator | 1 |
| 10***16 | Radiator As | 1 |
102-3915 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 2 |
| 09***01 | Cap-Radiator | 1 |
| 10***15 | Radiator & Hydraulic Oil Cooler Group | 1 |
Electrical And Starting System
9g-9813 Alarm Gp -Action
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
7y-5526 Alarm Gp-Travel
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
3e-7577 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
| 10***56 | Diode As; (Alternator) | 1 |
104-4316 Alternator Gp-Charging
| 10***21 | Pulley-Alternator | 1 |
| 10***16 | Alternator Group-Charging | 1 |
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 1 |
112-3109 Battery & Wiring Gp
| 08***87 | Grommet | 2 |
| 09***63 | Grommet | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
133-8824 Battery & Wiring Gp
| 03***95 | Clip | 3 |
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 10***40 | Cable As-Coaxial | 1 |
132-4431 Battery & Wiring Gp
| 13***94 | Harness As | 1 |
| 13***31 | Battery & Wiring Group | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
6c-6843 Control & Mtg Gp-Engine Elek
| 12***49 | Control Group-Eng Ratings Elek | 1 |
| 6C***43 | Control & Mtg Group-Engine Elek | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 4 |
136-4361 Control & Mtg Gp-Engine Elek
| 12***32 | High Ambient Control Group-Electronic | 1 |
| 13***61 | Control & Mtg Group-Engine Elek | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 4 |
7t-8000 Converter Gp-Electrical
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 7N***81 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
114-7143 Converter Gp-Electrical
| 11***43 | Converter Group-Electrical | 1 |
| 13***46 | Converter Group-Electrical; (24-Volt To 12-Volt) | 1 |
| 13***55 | Harness As | 1 |
162-7755 Lamp Gp-Dome
| 15***26 | Switch; (Dome Light) | 1 |
| 15***27 | Lamp; (24-Volt)(Dome Light) | 2 |
| 15***28 | Lens; (Dome Light) | 1 |
5i-8250 Lamp Gp-Flood
| 10***01 | Lens Assem. | 1 |
| 10***02 | Band | 1 |
| 10***03 | Ring (Rubber) | 1 |
126-7487 Lamp Gp-Flood
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
153-2521 Lamp Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
7y-5533 Lighting Gp-Boom
| 4D***23 | Clip - Harness Assembly To Engine | 2 |
| 5I***50 | Lamp Group-Flood; -Boom | 1 |
| 5I***73 | Support | 1 |
7y-5531 Lighting Gp-Boom
| 1S***20 | Clip (1.50" Long); Clip-Hose As. To Frame | 3 |
| 4D***23 | Clip - Harness Assembly To Engine | 13 |
| 5I***50 | Lamp Group-Flood; -Boom | 1 |
6c-9215 Lighting Gp-Cab
| 01***02 | Lockwasher | 2 |
| 11***29 | Harness As | 1 |
| 2B***52 | Washer .047 In. (1.19 mm) Thick | 4 |
7y-5532 Lighting Gp-Boom
| 1S***20 | Clip (1.50" Long); Clip-Hose As. To Frame | 3 |
| 4D***23 | Clip - Harness Assembly To Engine | 12 |
| 5I***50 | Lamp Group-Flood; -Boom | 1 |
7y-8197 Lighting Gp-Chassis
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 2 |
| 5I***50 | Lamp Group-Flood; -Boom | 2 |
| 7Y***97 | Lighting Group-Chassis | 1 |
108-2558 Lighting Gp-Flood
| 10***58 | Lighting Group-Flood | 1 |
| 11***46 | Support As | 1 |
| 11***49 | Support As | 1 |
130-3869 Lighting Gp-Flood
| 12***44 | Harness As-Lighting | 2 |
| 13***69 | Lighting Group-Flood | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 6 |
7y-5536 Panel Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 10***22 | Harness As | 1 |
| 3E***77 | Relay As; (24-Volt) | 7 |
132-2159 Panel Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 13***58 | Harness As | 1 |
| 13***59 | Panel Group-Circuit Breaker | 1 |
121-1087 Panel Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 12***64 | Harness As | 1 |
| 12***87 | Panel Group-Circuit Breaker | 1 |
7e-9407 Sensor Gp-Engine
| 3E***70 | Control Group-Electronic | 1 |
| 3E***86 | Sensor Group-Speed; -Magnetic, Low Output | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
6i-2108 Solenoid Gp-Shutoff
| 15***53 | Solenoid As; (Fuel Shutoff) | 1 |
| 2A***46 | Bolt,Machine Governor Linkage Bracket | 2 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 1 |
4i-0152 Starting Ar-Cold Weather
| 4I***52 | Starter Ar-Cold Weather | 1 |
| 4I***30 | Cover Group | 1 |
| 7Y***30 | Wiring Group; Battery & Wiring Gp-Cold Weath | 1 |
7y-1661 Starting Aid Gp-Ether
| 10***77 | Bracket As | 1 |
| 10***81 | Tube | 1 |
| 2B***04 | Clip (1.062" Long); (1/4 In Id Opening) | 7 |
106-8552 Starting Motor Gp-Electric
| 10***52 | Starting Motor Group-Electric | 1 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 5 |
6v-5227 Starting Motor Gp-Electric
| 10***52 | Starting Motor Group-Electric | 1 |
| 6V***27 | Starting Motor Group-Electric | 1 |
| 6V***37 | Starting Motor Group-Electric | 1 |
6v-5538 Starting Motor Gp-Electric
| 3E***25 | Cover As; (Starting Motor) | 1 |
| 3E***27 | Kit-Bearing; (Starting Motor)(Incl Bearing Seals & Spacers) | 1 |
| 3E***28 | Kit; (Brush) (Includes O-Rings, Screw, Spring, & Brush) | 1 |
7s-3622 Starting Motor Gp-Electric
| 3E***34 | Bolt; (5/8-11x1.5-In) | 3 |
| 3N***39 | Wire As. (Order By The Meter) | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
6v-5537 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 2H***29 | Ring - Retaining External | 1 |
7n-0719 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***19 | Switch Group-Disconnect; -Battery | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
7y-5530 Battery & Wiring Gp -Cold Weather
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
7y-5528 Wiring Gp-Console
| 5I***81 | Wiring Group-Console | 1 |
| 5I***82 | Wiring Group-Console | 1 |
| 7Y***28 | Wiring Group-Console | 1 |
5i-8282 Wiring Gp-Console
| 10***17 | Resistor As; (Main Relay) | 1 |
| 10***18 | Cover | 1 |
| 10***08 | Harness As | 1 |
5i-8281 Wiring Gp-Console
| 10***39 | Harness As | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
| 3T***05 | Switch As-Toggle; (Local, Remote Throttle) | 1 |
7y-5529 Wiring Gp-Engine
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***18 | Clip | 1 |
| 14***95 | Harness As | 1 |
7y-5539 Wiring Gp-Hammer
| 7I***89 | Film-Instruction | 1 |
| 7I***90 | Film-Instruction | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
7y-5524 Wiring Gp-Lift
| 10***29 | Film-Heavy Lift | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
Engine Arrangement
101-9738 Engine Ar
| 10***38 | Engine Ar | 1 |
| 10***15 | Engine Ar | 1 |
| 12***92 | Engine Ar | 1 |
122-9792 Engine Ar
| 10***12 | Drive Group-Fan | 1 |
| 10***17 | Belt Tensioner Group; Belt Tightener Gp | 1 |
| 10***69 | Housing & Regulator Group | 1 |
118-9729 Engine Ar
| 10***57 | Pump Group-Engine Oil | 1 |
| 11***29 | Engine Ar | 1 |
| 12***11 | Turbocharger Group | 1 |
104-4315 Engine Ar
| 10***12 | Drive Group-Fan | 1 |
| 10***17 | Belt Tensioner Group; Belt Tightener Gp | 1 |
| 10***69 | Housing & Regulator Group | 1 |
4p-2701 Engine Ar
| 11***44 | Kit-Gasket; (Fuel System) | 1 |
| 12***75 | Kit-Gasket; (Rear Structure) | 1 |
| 12***76 | Kit-Gasket; (Oil Cooler & Lines) | 1 |
Frame And Body
4i-7922 Box & Mounting Gp
| 4I***22 | Box & Mounting Group | 1 |
| 4I***83 | Clip | 1 |
| 4I***04 | Seal | 1 |
4i-0122 Box & Mounting Gp
| 4I***22 | Box & Mounting Group | 1 |
| 4I***93 | Box Group-Storage | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 15 |
4i-2193 Box Gp-Storage
| 09***43 | Pin-Cotter | 2 |
| 09***80 | Pin; (Clevis) | 2 |
| 1K***50 | Spring | 1 |
7y-5670 Chain Gp-Counterweight
| 08***07 | Pin | 2 |
| 09***14 | Nut | 2 |
| 09***33 | Nut-Castle; (M36x4-Thd) | 2 |
107-3563 Counterweight Ar -Removal
| 10***63 | Counterweight Ar; -Removal | 1 |
| 4I***62 | Lines Group-Rear Attachment | 1 |
| 5I***85 | Mounting Group-Cylinder | 1 |
4i-0163 Counterweight Gp
| 08***79 | Bearing; (Sleeve) | 2 |
| 10***29 | Counterweight | 1 |
| 10***30 | Bolt; (M30x3.50x420mm) | 8 |
125-2719 Counterweight Gp
| 08***79 | Bearing; (Sleeve) | 2 |
| 12***19 | Counterweight Group | 1 |
| 12***20 | Counterweight | 1 |
4i-2930 Cover Gp-Battery
| 10***23 | Cover As | 1 |
| 10***25 | Cover As | 1 |
| 4I***74 | Plate As | 1 |
7i-1534 Cover Gp-Counterweight
| 09***47 | Bumper (Note G) | 3 |
| 7I***34 | Cover Group-Counterweight | 1 |
| 7I***35 | Sheet | 1 |
105-6807 Door Gp-Access
| 10***07 | Door Group-Access | 1 |
| 10***08 | Door Group-Access | 1 |
105-6808 Door Gp-Access
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 4 |
| 10***08 | Door Group-Access | 1 |
| 5P***05 | Seal (Order By Meter) 2m | 0 |
4i-2432 Door Gp-Access
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 4 |
| 10***59 | Liner | 1 |
| 10***60 | Liner | 1 |
4i-2453 Door Gp-Access
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 4 |
| 4I***81 | Door As | 1 |
| 4I***52 | Liner | 1 |
4i-2435 Door Gp-Access
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 4 |
| 4I***47 | Door As | 1 |
| 4I***35 | Door Group-Access | 1 |
4i-2437 Door Gp-Access
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 4 |
| 10***61 | Liner | 1 |
| 10***62 | Liner | 1 |
123-4320 Frame Gp-Upper
| 08***65 | Door As | 1 |
| 08***40 | Plate | 3 |
| 09***77 | Shim; (1-mm Thk) | 2 |
110-6940 Frame Gp-Upper
| 08***65 | Door As | 1 |
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***08 | Shim; (2-mm Thk) | 1 |
102-6392 Gear & Bearing Gp-Swing
| 10***92 | Gear & Bearing Group-Swing | 1 |
| 10***93 | Gear & Bearing Group-Swing; (77-Bearing) | 1 |
| 10***94 | Gear & Bearing Group-Swing; (84-Bearing), Cylinder Head; (Sub For Ffsb107262) | 1 |
7y-1798 Gear & Bearing Gp-Swing
| 09***20 | Spacer; (25x44x6-mm Thk) | 40 |
| 09***02 | Pin, Dowel | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
123-2831 Guard Gp-Swivel
| 12***31 | Guard Group; Guard Gp - Swivel | 1 |
| 12***32 | Cover Assembly | 1 |
| 12***33 | Cover Assembly | 1 |
4i-0138 Guard Gp-Bottom
| 10***36 | Sheet | 1 |
| 4I***38 | Guard Group-Bottom | 1 |
| 4I***08 | Sheet | 2 |
127-0972 Guard Gp-Swivel
| 09***33 | Nut-Castle; (M36x4-Thd) | 1 |
| 09***16 | Spacer | 1 |
| 09***17 | Pin-Cotter | 1 |
7y-9523 Guard Gp-Swivel
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 2 |
| 10***40 | Cover As | 1 |
| 10***41 | Spacer (17mm Id) | 10 |
4i-0120 Handrail Gp
| 11***53 | Handrail As | 1 |
| 11***03 | Handrail As | 1 |
| 4I***20 | Handrail Group | 1 |
108-9632 Hood & Guard Gp
| 08***08 | Shim (1.0mm Thick) | 4 |
| 08***09 | Shim (2.0mm Thick) | 4 |
| 09***43 | Pin-Cotter | 1 |
6c-9338 Lock Gp-Swing
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 1 |
| 10***11 | Pin As | 1 |
| 10***00 | Cover As | 1 |
7y-6281 Lubrication Gp-Electric
| 09***86 | Washer-Plated; (11x25x4.5-mm Thk) | 8 |
| 11***85 | Plate As | 1 |
| 4I***48 | Support As | 1 |
4i-8476 Pump Gp-Lubrication
| 09***40 | Pin-Cotter | 1 |
| 09***03 | Seal-O-Ring | 1 |
| 10***88 | Motor Group-Lubrication | 1 |
4i-8457 Reel Gp-Hose
| 10***71 | Roller As | 1 |
| 10***72 | Support | 1 |
| 10***73 | Bearing | 1 |
4i-2631 Walkway Gp
| 12***03 | Walkway As | 2 |
| 4I***31 | Walkway Group | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 12 |
4i-0141 Walkway Gp
| 12***03 | Walkway As | 1 |
| 12***04 | Walkway As; (Left Front) | 1 |
| 4I***41 | Walkway Group | 1 |
Fuel System
7c-8993 Fastener Gp-Fuel Inj Pump
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 3 |
| 2S***83 | Bolt (3.25" Long-Drilled Head) | 1 |
| 4F***57 | Screw,Cap,Hexagon H Shock Mount To Bracket | 8 |
6i-0094 Fastener Gp-Fuel Inj Pump
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 2H***34 | Seal Transfer Pump To Plate | 1 |
1w-6351 Filter Gp-Primary Fuel
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 1L***69 | Ring-Retaining | 1 |
| 1W***51 | Filter Group-Primary Fuel | 1 |
4p-9827 Pump Gp-Fuel Injection
| 1W***87 | Valve As-Check; (Fuel Injection Pump) | 1 |
| 4P***27 | Pump Group-Fuel Injection | 1 |
| 4P***30 | Plunger & Barrel Assem. | 1 |
7w-5928 Pump Gp-Fuel Injection
| 1W***87 | Valve As-Check; (Fuel Injection Pump) | 1 |
| 1W***71 | Bonnet-Valve | 1 |
| 7C***78 | Bolt-Plunger Gear; (Fuel Pump) | 1 |
6i-2830 Pump Gp-Fuel Injection
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 4 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 6 |
| 15***24 | Gasket-Timing | 1 |
115-9595 Pump Gp-Fuel Injection
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 4 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 6 |
| 11***95 | Pump Group-Fuel Injection | 1 |
1w-3597 Torque Control Gp
| 1P***52 | Insulator,Bushing Governor | 1 |
| 1W***97 | Torque Control Group | 1 |
| 2P***85 | Spacer (.635 mm Thk); (0.635-mm Thk) | 1 |
8n-7276 Torque Control Gp
| 1P***52 | Insulator,Bushing Governor | 1 |
| 2P***85 | Spacer (.635 mm Thk); (0.635-mm Thk) | 1 |
| 2W***34 | Bar-Load Stop; (4.0mm Thk) | 1 |
7y-9570 Adapter Gp-Fast Fill Fuel
| 00***73 | Connector-Hose | 1 |
| 00***07 | Elbow; (90 Degree) | 1 |
| 09***90 | Clamp; (Hose) (26-39mm Id) | 1 |
7e-9337 Control Gp-Fuel Ratio
| 2D***92 | Gasket Shaft Part Of Kit P/N 5r***25 | 1 |
| 4P***07 | Control Group-Fuel Ratio | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 2 |
4p-2507 Control Gp-Fuel Ratio
| 10***93 | Washer | 1 |
| 11***58 | Washer; (12.7x6.65x0.79-mm Thk) | 1 |
| 1B***01 | Nut Generator Line Leads; Nut-Generator Line Leads | 1 |
111-5162 Control Gp-Fuel Ratio
| 10***93 | Washer | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
| 11***58 | Washer; (12.7x6.65x0.79-mm Thk) | 1 |
119-0635 Control Gp-Governor
| 11***35 | Control Group-Governor | 1 |
| 11***36 | Motor As-Governor | 1 |
| 11***37 | Bracket As | 1 |
7y-5522 Control Gp-Governor
| 09***49 | Clip | 2 |
| 4I***45 | Bracket As | 1 |
| 4I***56 | Cover As | 0 |
2w-1011 Filter Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
| 1R***50 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
| 2W***11 | Filter Group-Secondary; (Secondary) | 1 |
2w-2410 Governor Gp
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 3 |
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 6 |
| 13***07 | Seal-Lip Type; (6.39mm) | 1 |
4i-0140 Lines Gp-Fuel
| 00***62 | Elbow (To Primary Filter Base) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4I***40 | Lines Group-Fuel | 1 |
4p-9889 Lines Gp-Fuel Injection
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***34 | Lines Group-Fuel Injection | 1 |
2w-3230 Lines Gp-Fuel Injection
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 2H***32 | Seal--To Bottom Cover On Selector Valve | 1 |
| 2H***34 | Seal Transfer Pump To Plate | 1 |
4p-9332 Lines Gp-Fuel Injection
| 1W***67 | Clamp As-Fuel Line (With Spacer) | 1 |
| 1W***68 | Clamp-Fuel Line; (Non-Threaded)(Thru Hole) | 2 |
| 1W***69 | Clamp-Fuel Line; (Threaded)(Threaded) | 3 |
2w-3249 Lines Gp-Fuel Injection
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 6 |
4p-9330 Lines Gp-Fuel Injection
| 10***53 | Line As-Fuel Injection; (Cyl No. 3) | 1 |
| 10***54 | Line As-Fuel Injection; (Cyl No. 4) | 1 |
| 1W***67 | Clamp As-Fuel Line (With Spacer) | 2 |
100-4634 Lines Gp-Fuel Injection
| 10***35 | Line As-Fuel Injection | 1 |
| 10***36 | Line As-Fuel Injection | 1 |
| 10***34 | Lines Group-Fuel Injection | 1 |
100-4635 Lines Gp-Fuel Injection
| 10***31 | Line As-Fuel Injection | 1 |
| 10***32 | Line As-Fuel Injection | 1 |
| 10***33 | Line As-Fuel Injection, .. Idler, . Idler | 1 |
128-7984 Protection Gp-Fuel System
| 12***94 | Bolt-Tamperproof; (28.58mm) | 1 |
| 12***96 | Bolt-Tamperproof; (95.25mm) | 1 |
| 12***84 | Protection Group-Fuel System | 1 |
8n-5251 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
8n-3365 Pump Gp-Fuel Priming
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
6i-2914 Pump Gp-Fuel Priming
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
| 09***34 | Spacer; (9x20x10-mm Thk) | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
1w-1695 Pump Gp-Fuel Transfer
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1W***69 | Piston | 1 |
| 1W***95 | Pump Group-Fuel Transfer | 1 |
2w-4160 Pump & Mtg Gp-Fuel Transfer
| 1W***95 | Pump Group-Fuel Transfer | 1 |
| 2W***60 | Pump Group-Fuel Transfer & Mtg; Fuel Transfer Pump And Mounting Group | 1 |
| 4B***65 | Screw,Cap,Hexagon Fuel Injection Pump | 1 |
4p-2705 Pump Gp-Gov & Fuel Inj
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 2W***10 | Governor Group | 1 |
| 2W***48 | Cover; (Solenoid) | 1 |
120-7622 Pump Gp-Gov & Fuel Inj
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
| 11***49 | Setscrew-Socket | 1 |
4i-0164 Tank & Mtg Gp-Fuel
| 09***07 | Shim (0.4mm Thick) | 4 |
| 09***08 | Shim (1.0mm Thick) | 4 |
| 12***14 | Tank Group-Fuel | 1 |
4i-0165 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 06***13 | Connector-Flared | 2 |
| 09***88 | Clamp; (Hose) | 1 |
128-9014 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 06***13 | Connector-Flared | 2 |
| 09***88 | Clamp; (Hose) | 1 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
Hydraulic System
4i-5756 Accumulator Gp-Hydraulic
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
7y-8421 Accumulator Gp-Hydraulic
| 4I***90 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 4I***56 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 7Y***21 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
4i-5690 Accumulator Gp-Hydraulic
| 4I***39 | Core | 1 |
| 4I***90 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 4I***62 | Cap | 1 |
5i-4253 Actuator Gp-Piston Pump
| 10***12 | Rod; ((149.7 mm)Lg) | 1 |
| 10***13 | Rod; ((150.3 mm)Lg) | 1 |
| 5I***53 | Actuator Group-Piston Pump | 1 |
5i-4254 Actuator Gp-Piston Pump
| 5I***54 | Actuator Group-Piston Pump | 1 |
| 5I***04 | Piston | 1 |
| 5I***05 | Rod | 1 |
7y-5729 Control Ar-Auxiliary
| 4I***73 | Lines Group-Pilot | 1 |
| 4I***74 | Lines Group-Front | 1 |
| 6I***35 | Film-Instruction; Film-Instruction (Hydraulic Crusher) | 1 |
7y-5728 Control Ar-Auxiliary
| 10***77 | Film Group | 1 |
| 4I***72 | Lines Group-Front | 1 |
| 4I***73 | Lines Group-Pilot | 1 |
7y-5730 Control Ar-Auxiliary
| 4I***73 | Lines Group-Pilot | 1 |
| 4I***76 | Lines Group-Front | 1 |
| 7Y***30 | Control Ar-Auxiliary | 1 |
116-5769 Control Ar-Auxiliary
| 10***80 | Film Group | 1 |
| 11***39 | Control Group-Hydraulic Pedal | 1 |
| 11***69 | Control Ar-Auxiliary | 1 |
116-5765 Control Ar-Auxiliary
| 11***39 | Control Group-Hydraulic Pedal | 1 |
| 11***65 | Control Ar-Auxiliary | 1 |
| 13***15 | Lines Group-Front | 1 |
116-5761 Control Ar-Auxiliary
| 10***77 | Film Group | 1 |
| 11***39 | Control Group-Hydraulic Pedal | 1 |
| 11***61 | Control Ar-Auxiliary | 1 |
7y-1664 Coupling Gp-Pump
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 8 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
| 6V***38 | Bolt-Socket Hd; (M10 X 1.5 X 20) | 2 |
102-0802 Cover Gp-Pump
| 10***02 | Name-Plate (Name Of Machine:Ex300), Cover Group-Pump | 1 |
| 10***16 | Coupling | 1 |
| 3K***15 | Seal-O-Ring (Id=101.27mm) | 1 |
4i-0907 Cylinder & Seal Gp-Stick
| 08***75 | Cylinder Group-Stick | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
| 4I***07 | Cylinder & Seal Group | 1 |
4i-0906 Cylinder & Seal Gp-Boom
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
| 4I***06 | Cylinder & Seal Group | 1 |
| 4I***15 | Cylinder Group-Boom | 1 |
4i-0909 Cylinder & Seal Gp-Bucket
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
| 4I***09 | Cylinder & Seal Group-Bucket | 1 |
| 4I***92 | Cylinder Group-Bucket | 1 |
4i-0908 Cylinder & Seal Gp-Bucket
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
| 4I***08 | Cylinder & Seal Group-Bucket | 1 |
| 4I***26 | Cylinder Group-Bucket | 1 |
7y-4974 Cylinder & Seal Gp-Ctwt
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 8 |
| 3H***22 | Grease Nipple (Service Replacement Only) | 4 |
| 6E***29 | Cylinder Group-Counterweight | 2 |
4i-1515 Cylinder Gp-Boom
| 09***26 | Seal-O-Ring | 1 |
| 09***09 | Ring | 1 |
| 10***59 | Bearing; (Sleeve) | 2 |
4i-1726 Cylinder Gp-Bucket
| 08***33 | Bearing-Sleeve; (106.2mm Od) | 1 |
| 08***48 | Bearing-Sleeve; (120mm Lg) | 1 |
| 08***50 | Ring; (Back Up) | 1 |
4i-3792 Cylinder Gp-Bucket
| 08***79 | Bearing; (Sleeve) | 1 |
| 08***85 | Locknut | 1 |
| 08***91 | Ring-Backup | 1 |
6e-3529 Cylinder Gp-Counterweight
| 12***97 | Head | 1 |
| 1K***85 | Ring Part Of Kit P/N 1w***46 | 1 |
| 2K***30 | Ring-Back-Up | 1 |
087-5375 Cylinder Gp-Stick
| 08***75 | Cylinder Group-Stick | 1 |
| 08***79 | Bearing; (Sleeve) | 2 |
| 08***85 | Locknut | 1 |
7y-1797 Drive Gp-Swing -Lh
| 10***11 | Motor & Mtg Group-Swing | 1 |
| 7Y***80 | Drive Group-Swing; -Lh | 1 |
| 7Y***97 | Drive Group-Swing; -Lh | 1 |
4i-7537 Drive Gp-Swing -Rh
| 09***30 | Ring; (Retaining) | 1 |
| 09***31 | Ring - Retaining | 1 |
| 09***50 | Coupling-Pipe | 1 |
4i-7533 Drive Gp-Swing -Rh
| 10***10 | Motor & Mtg Group-Swing | 1 |
| 4I***33 | Drive Group-Swing; -Rh | 1 |
| 4I***37 | Drive Group-Swing; -Rh | 1 |
7y-1680 Drive Gp-Swing -Lh
| 09***30 | Ring; (Retaining) | 1 |
| 09***31 | Ring - Retaining | 1 |
| 09***50 | Coupling-Pipe | 1 |
7y-1803 Fastener Gp-Swing & Final Dr
| 09***55 | Pin | 2 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2B***61 | Cork-- Compression Release Shaft Hole | 4 |
7y-4075 Filter Gp-Oil
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 12***14 | Filter-Oil; (Ultra High Efficiency) | 1 |
| 4I***50 | Filter-Oil; (Advanced Efficiency)(Hydraulic)(Disposable) | 1 |
185-0336 Filter Gp-Oil
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 18***36 | Filter Group-Oil; -Hydraulic | 1 |
| 18***37 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
6e-5534 Filter Gp-Oil
| 4T***88 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 6E***34 | Filter Group-Oil; -Hydraulic-Case Drain | 1 |
102-0800 Head Gp-Pump
| 08***72 | Plug-O-Ring | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 10***00 | Head Group-Pump | 1 |
7y-5731 Installation Ar-Pilot Lines
| 4I***79 | Lines Group-Pilot | 1 |
| 7Y***39 | Wiring Group-Hammer; Wiring Gp | 1 |
| 7Y***31 | Installation Ar-Pilot Lines | 1 |
4i-2519 Lift Ar
| 4I***19 | Lift Ar | 1 |
| 4I***13 | Lines Group-Pilot | 1 |
| 7Y***24 | Wiring Group-Lift; Wiring Gp-Heavy Lift | 1 |
5i-7271 Lines Ar-Auxiliary Hydraulic
| 5I***71 | Lines Ar-Auxiliary Hydraulic | 1 |
| 5I***72 | Stick Group | 1 |
| 7Y***38 | Lines Group-Auxiliary Hydraulic | 1 |
5i-7283 Lines Ar-Auxiliary Hydraulic
| 5I***83 | Lines Ar-Auxiliary Hydraulic | 1 |
| 5I***84 | Stick Group; -Short | 1 |
| 7Y***39 | Lines Group-Auxiliary Hydraulic | 1 |
5i-7255 Lines Ar-Auxiliary Hydraulic
| 5I***55 | Lines Ar-Auxiliary Hydraulic | 1 |
| 5I***56 | Boom & Bearing As; -Long | 1 |
| 7Y***32 | Lines Group-Auxiliary Hydraulic | 1 |
5i-7279 Lines Ar-Auxiliary Hydraulic
| 5I***79 | Lines Ar-Auxiliary Hydraulic | 1 |
| 5I***80 | Stick Group; -Medium | 1 |
| 7Y***39 | Lines Group-Auxiliary Hydraulic | 1 |
5i-7267 Lines Ar-Auxiliary Hydraulic
| 5I***67 | Lines Ar-Auxiliary Hydraulic | 1 |
| 5I***68 | Stick Group | 1 |
| 7Y***38 | Lines Group-Auxiliary Hydraulic | 1 |
5i-7263 Lines Ar-Auxiliary Hydraulic
| 5I***63 | Lines Ar-Auxiliary Hydraulic | 1 |
| 5I***64 | Stick Group; -Long | 1 |
| 7Y***36 | Lines Group-Auxiliary Hydraulic | 1 |
5i-7259 Lines Ar-Auxiliary Hydraulic
| 5I***59 | Lines Ar-Auxiliary Hydraulic | 1 |
| 5I***60 | Boom Group; -Short | 1 |
| 7Y***33 | Lines Group-Auxiliary Hydraulic | 1 |
5i-7275 Lines Ar-Auxiliary Hydraulic
| 5I***75 | Lines Ar-Auxiliary Hydraulic | 1 |
| 5I***76 | Stick Group | 1 |
| 7Y***38 | Lines Group-Auxiliary Hydraulic | 1 |
7y-5736 Lines Gp-Auxiliary Hydraulic
| 1P***04 | Seal - Rectangular (45mm Dia) | 6 |
| 1P***67 | Flange-Half (43.31 mm Id) | 12 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
7y-5734 Lines Gp-Auxiliary Hydraulic
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
| 7Y***71 | Clamp As | 12 |
| 7Y***34 | Lines Group-Auxiliary Hydraulic | 1 |
7y-5739 Lines Gp-Auxiliary Hydraulic
| 1P***04 | Seal - Rectangular (45mm Dia) | 6 |
| 1P***67 | Flange-Half (43.31 mm Id) | 12 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
7y-5738 Lines Gp-Auxiliary Hydraulic
| 1P***04 | Seal - Rectangular (45mm Dia) | 6 |
| 1P***67 | Flange-Half (43.31 mm Id) | 12 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
7y-5745 Lines Gp-Auxiliary Hydraulic
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 5I***26 | Adapter | 1 |
7y-5732 Lines Gp-Auxiliary Hydraulic
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 5I***88 | Tube As-Lh | 1 |
7y-5744 Lines Gp-Auxiliary Hydraulic
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 5I***26 | Adapter | 1 |
7y-5735 Lines Gp-Auxiliary Hydraulic
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
| 5I***35 | Tube As | 1 |
| 5I***36 | Tube As | 1 |
7y-5742 Lines Gp-Auxiliary Hydraulic
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 5I***26 | Adapter | 1 |
7y-5733 Lines Gp-Auxiliary Hydraulic
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 5I***32 | Tube As-Rh | 1 |
4i-0952 Lines Gp-Boom
| 1P***04 | Seal - Rectangular (45mm Dia) | 7 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 1P***67 | Flange-Half (43.31 mm Id) | 12 |
4i-0953 Lines Gp-Boom
| 1P***04 | Seal - Rectangular (45mm Dia) | 7 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 1P***67 | Flange-Half (43.31 mm Id) | 12 |
136-8607 Lines Gp-Boom
| 13***64 | Bracket As | 1 |
| 13***07 | Lines Group-Boom | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 7 |
136-8608 Lines Gp-Boom
| 13***64 | Bracket As | 1 |
| 13***08 | Lines Group-Boom | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 7 |
7i-8217 Lines Gp-Boom Cylinder
| 08***79 | Support As | 2 |
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 8 |
| 10***00 | Tube As | 1 |
4i-0951 Lines Gp-Boom Cylinder
| 08***79 | Support As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 4 |
| 4I***51 | Lines Group-Boom Cylinder | 1 |
4i-0972 Lines Gp-Front
| 11***21 | Hose As | 1 |
| 11***22 | Hose As | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 4 |
136-7916 Lines Gp-Front
| 09***03 | Seal-O-Ring | 2 |
| 10***34 | Tube As | 1 |
| 10***35 | Tube As | 1 |
133-6417 Lines Gp-Front
| 08***37 | Shim (2.0mm Thick); (2.0 mm Thick) | 4 |
| 08***38 | Shim (1.0mm Thick); (1.0 mm Thick) | 4 |
| 08***40 | Shim (0.4mm Thick); (0.4 mm Thick) | 4 |
4i-0976 Lines Gp-Front
| 10***34 | Tube As | 1 |
| 10***35 | Tube As | 1 |
| 10***36 | Grommet; Use W/ Nla Fender 68***95, Grommet; Use W/ Nla Fender 68***96, Tube As | 1 |
4i-0964 Lines Gp-Front
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 1 |
| 1P***67 | Flange-Half (43.31 mm Id) | 2 |
136-7915 Lines Gp-Front
| 13***80 | Hose As | 1 |
| 13***82 | Hose As | 1 |
| 13***15 | Lines Group-Front | 1 |
125-0516 Lines Gp-Front
| 12***37 | Hose As | 4 |
| 12***20 | Tube As | 1 |
| 12***46 | Hose As | 1 |
4i-0974 Lines Gp-Front
| 11***21 | Hose As | 1 |
| 11***23 | Hose As | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 4 |
136-7914 Lines Gp-Front
| 10***93 | Valve Group-Relief | 1 |
| 13***80 | Hose As | 1 |
| 13***81 | Hose As | 1 |
4i-0950 Lines Gp-Pilot
| 08***53 | Valve Group-Manifold & Reducing | 1 |
| 08***25 | Plate | 1 |
| 08***26 | Block | 1 |
4i-6213 Lines Gp-Pilot
| 08***11 | Hose As (Nom 06, L=450mm) | 2 |
| 08***58 | Hose As (Nom 06, L=550mm) | 1 |
| 08***59 | Hose As | 1 |
4i-0966 Lines Gp-Pilot
| 11***99 | Hose As | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 6 |
| 4I***66 | Lines Group-Pilot | 1 |
6c-9203 Lines Gp-Pilot
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***29 | Hose As | 2 |
| 08***76 | Grommet | 1 |
4i-0979 Lines Gp-Pilot
| 08***67 | Hose As (Nom 06, L=700mm) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
| 4I***79 | Lines Group-Pilot | 1 |
4i-0973 Lines Gp-Pilot
| 08***67 | Hose As (Nom 06, L=700mm) | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 8 |
| 4I***73 | Lines Group-Pilot | 1 |
108-7586 Lines Gp-Pilot
| 08***77 | Hose As (Nom 06, L=1600mm) | 1 |
| 10***72 | Hose As (Nom 06, L=1650mm) | 1 |
| 10***86 | Lines Group-Pilot | 1 |
4i-0948 Lines Gp-Pump
| 10***40 | Hose As | 2 |
| 10***25 | Hose | 1 |
| 13***51 | Adapter | 2 |
4i-0962 Lines Gp-Rear Attachment
| 08***14 | Band As | 2 |
| 08***15 | Band As | 2 |
| 08***77 | Hose As (Nom 06, L=1600mm) | 1 |
4i-0947 Lines Gp-Return & Filter
| 08***70 | Hose Assem. | 1 |
| 08***29 | Block | 1 |
| 08***48 | Valve Group-Relief | 1 |
4i-0965 Lines Gp-Return & Filter
| 10***26 | Hose As | 1 |
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 4 |
| 4I***65 | Lines Group-Return & Filter | 1 |
126-0714 Lines Gp-Stick
| 12***14 | Lines Group-Stick | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 6 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
4i-0955 Lines Gp-Stick
| 1P***04 | Seal - Rectangular (45mm Dia) | 6 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
| 4I***55 | Lines Group-Stick | 1 |
4i-0959 Lines Gp-Stick
| 1P***04 | Seal - Rectangular (45mm Dia) | 5 |
| 1P***05 | Seal (Check Valve Outlet) | 1 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
4i-0957 Lines Gp-Stick
| 10***50 | Hose As | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 6 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
4i-0958 Lines Gp-Stick
| 1P***04 | Seal - Rectangular (45mm Dia) | 6 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
| 4I***58 | Lines Group-Stick | 1 |
4i-0956 Lines Gp-Stick
| 1P***04 | Seal - Rectangular (45mm Dia) | 6 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
| 4I***56 | Lines Group-Stick | 1 |
4i-0954 Lines Gp-Stick
| 1P***04 | Seal - Rectangular (45mm Dia) | 6 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
| 4I***54 | Lines Group-Stick | 1 |
4i-0945 Lines Gp-Swing Motor
| 11***24 | Valve Group-Control | 1 |
| 11***57 | Block | 1 |
| 11***60 | Hose As | 1 |
108-7587 Lines Gp-Swing Motor
| 10***87 | Block | 1 |
| 10***87 | Lines Group-Swing Motor | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
123-2830 Lines Gp-Travel Motor
| 09***80 | Bolt-Socket Head; (M12x1.75x105-mm) | 12 |
| 10***56 | Block As | 2 |
| 10***30 | Hose As | 3 |
4i-1687 Lines Gp-Travel Motor
| 09***80 | Bolt-Socket Head; (M12x1.75x105-mm) | 12 |
| 09***31 | Orifice | 1 |
| 10***30 | Hose As | 3 |
4i-0944 Lines Gp-Travel Motor
| 09***80 | Bolt-Socket Head; (M12x1.75x105-mm) | 12 |
| 09***31 | Orifice | 1 |
| 10***56 | Block As | 1 |
105-7411 Motor & Mtg Gp-Swing
| 10***78 | Motor Group-Swing | 1 |
| 10***11 | Motor & Mtg Group-Swing | 1 |
| 6V***04 | Circlip - External | 1 |
105-7410 Motor & Mtg Gp-Swing
| 10***77 | Motor Group-Swing | 1 |
| 10***10 | Motor & Mtg Group-Swing | 1 |
| 6V***04 | Circlip - External | 1 |
087-4764 Motor & Mtg Gp-Travel
| 08***64 | Motor & Mtg Group-Travel | 1 |
| 12***46 | Motor Group-Piston | 1 |
| 2D***72 | Seal-O-Ring; (Drive Motor Mount) | 1 |
126-2046 Motor Gp-Piston
| 08***74 | Nozzle | 1 |
| 08***85 | Plug-Break Off | 2 |
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 12 |
105-7277 Motor Gp-Swing
| 09***00 | Plug | 2 |
| 09***39 | Ring; (Retaining) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
105-7278 Motor Gp-Swing
| 09***00 | Plug | 2 |
| 09***39 | Ring; (Retaining) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
111-9990 Motor Gp-Swing
| 09***00 | Plug | 2 |
| 09***39 | Ring; (Retaining) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
111-9989 Motor Gp-Swing
| 09***00 | Plug | 2 |
| 09***39 | Ring; (Retaining) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
107-6545 Motor Gp-Piston
| 08***74 | Nozzle | 1 |
| 08***85 | Plug-Break Off | 2 |
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 12 |
5i-7085 Mounting Gp-Cylinder
| 09***65 | Shim (1.0mm Thick) | 4 |
| 09***97 | Shim (2.0mm Thick) | 2 |
| 09***91 | Shim (1.5mm Thick) | 2 |
4i-3691 Mounting Gp-Valve
| 08***06 | Shim (2.0 mm Thick) | 24 |
| 08***07 | Shim (1.0 mm Thick) | 24 |
| 08***08 | Shim (0.7mm Thick) | 24 |
7y-1819 Pump & Mtg Gp-Hydraulic
| 10***81 | Pump Group-Swing | 1 |
| 12***55 | Pump Group-Gear; -Pilot | 1 |
| 7M***52 | Seal-O-Ring | 1 |
7y-1663 Pump & Mtg Gp-Main Hydraulic
| 08***50 | Pump Group-Main Hydraulic | 1 |
| 7X***11 | Bolt-Plt; (7/16unc X 2 1/4) | 12 |
| 7Y***63 | Pump & Mtg Group-Main Hydraulic | 1 |
128-9055 Pump Gp-Gear -Pilot
| 11***15 | Pump Group-Gear; -Pilot | 1 |
| 12***55 | Pump Group-Gear; -Pilot | 1 |
| 7Y***12 | Pump Group-Gear; -Pilot | 1 |
118-0215 Pump Gp-Gear -Pilot
| 09***19 | Ring-Retaining | 1 |
| 09***95 | Pin, Dowel | 2 |
| 11***15 | Pump Group-Gear; -Pilot | 1 |
7y-4012 Pump Gp-Gear -Pilot
| 09***22 | Seal-Lip Type | 1 |
| 09***76 | Sleeve-Spline | 1 |
| 09***78 | Cover | 1 |
087-4750 Pump Gp-Main Hydraulic
| 08***50 | Pump Group-Main Hydraulic | 1 |
| 09***54 | Seal-O-Ring | 2 |
| 10***78 | Pump Group-Piston; -Front, Rear | 1 |
114-0631 Pump Gp-Piston -Front, Rear
| 09***21 | Plug, Shipping | 2 |
| 09***82 | Pin-Spring | 5 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 15 |
107-6478 Pump Gp-Piston -Front, Rear
| 09***82 | Pin-Spring | 5 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 15 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 2 |
105-7281 Pump Gp-Swing
| 10***62 | Dowel | 1 |
| 10***47 | Seal Kit | 1 |
| 10***99 | Rotating Group-Pump | 1 |
126-2045 Rotating Gp-Motor
| 09***29 | Ring; (Retaining) | 1 |
| 10***47 | Plate | 1 |
| 11***15 | Piston As | 1 |
107-6546 Rotating Gp-Motor
| 09***29 | Ring; (Retaining) | 1 |
| 10***46 | Rotating Group-Motor | 1 |
| 10***47 | Plate | 1 |
102-0799 Rotating Gp-Pump
| 09***27 | Ring-Retaining | 1 |
| 10***99 | Rotating Group-Pump | 1 |
| 10***03 | Barrel As | 1 |
7y-4830 Rotor Gp-Swivel
| 4J***21 | Packing,Preformed Tube Assembly Flange | 5 |
| 4J***40 | Seal-O-Ring (Id=18.64mm) | 1 |
| 7X***57 | Bolt; (M16x2.0x140mm) | 5 |
7y-4827 Rotor Gp-Swivel
| 7Y***27 | Rotor Group-Swivel | 1 |
| 7Y***28 | Rotor (Casting) | 1 |
| 7Y***30 | Rotor Group-Swivel | 1 |
7y-4798 Screen Gp-Hydraulic
| 09***39 | Spring | 1 |
| 09***41 | Holder, Guide | 1 |
| 5L***32 | Seal-Flange To Air Cleaner; Seal Flange To Air Cleaner | 1 |
7y-4825 Swivel Gp
| 09***28 | Seal-O-Ring | 1 |
| 15***19 | Seal | 8 |
| 19***76 | Kit-Seal | 1 |
107-6655 Tank & Filter Gp-Hydraulic
| 09***88 | Cover | 2 |
| 09***16 | Valve As; (By-Pass) | 2 |
| 09***32 | Spring | 2 |
103-8276 Tank & Filter Gp-Hydraulic
| 09***88 | Cover | 2 |
| 09***16 | Valve As; (By-Pass) | 2 |
| 09***32 | Spring | 2 |
107-6654 Tank & Filter Gp-Hydraulic
| 09***88 | Cover | 2 |
| 09***16 | Valve As; (By-Pass) | 2 |
| 09***32 | Spring | 2 |
116-3425 Tank & Filter Gp-Hydraulic
| 10***54 | Tank & Filter Group-Hydraulic | 1 |
| 10***55 | Tank & Filter Group-Hydraulic | 1 |
| 11***25 | Tank & Filter Group-Hydraulic | 1 |
107-6653 Tank & Filter Gp-Hydraulic
| 10***53 | Tank & Filter Group-Hydraulic | 1 |
| 10***54 | Tank & Filter Group-Hydraulic | 1 |
| 10***55 | Tank & Filter Group-Hydraulic | 1 |
4i-0903 Tank & Filter Gp-Hydraulic
| 10***72 | Tank & Filter Group-Hydraulic | 1 |
| 10***76 | Tank & Filter Group-Hydraulic | 1 |
| 4I***03 | Tank & Filter Group-Hydraulic | 1 |
103-8272 Tank & Filter Gp-Hydraulic
| 09***88 | Cover | 2 |
| 09***16 | Valve As; (By-Pass) | 2 |
| 09***32 | Spring | 2 |
4i-0902 Tank & Mtg Gp-Hydraulic
| 08***06 | Shim (2.0 mm Thick) | 4 |
| 08***07 | Shim (1.0 mm Thick) | 4 |
| 08***09 | Shim (0.4 mm Thick) | 4 |
4i-0963 Valve Ar
| 4I***63 | Valve Ar | 1 |
| 4I***64 | Lines Group-Front | 1 |
| 4I***65 | Lines Group-Return & Filter | 1 |
8j-6875 Valve Gp-Shuttle
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 4B***84 | Ball | 1 |
| 4T***05 | Adapter | 2 |
9t-9653 Valve Gp-Blocker
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 3F***79 | Pin (Spring) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
4i-1024 Valve Gp-Brake
| 09***73 | Seal-O-Ring (Id=5.80mm) | 1 |
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 1 |
4i-5672 Valve Gp-Check
| 18***73 | Setscrew; (Socket) | 1 |
| 18***91 | Washer; (1.2-mm Thk) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
6e-5531 Valve Gp-Check
| 2K***99 | Seal-Interface Between Inlet Manifold | 1 |
| 6E***83 | Seat | 1 |
| 6E***84 | Valve | 1 |
6i-6849 Valve Gp-Check
| 09***73 | Spring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4I***76 | Fitting As | 1 |
107-6584 Valve Gp-Check
| 08***12 | Spring | 1 |
| 08***13 | Poppet, Check | 1 |
| 08***14 | Body | 1 |
087-5087 Valve Gp-Check
| 08***87 | Valve Group-Check; -Pilot Operated | 1 |
| 11***48 | Body | 1 |
| 11***49 | Valve Group-Check | 1 |
107-6426 Valve Gp-Check
| 08***69 | Cover | 1 |
| 09***39 | Seal-O-Ring | 1 |
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
114-0649 Valve Gp-Check
| 11***49 | Valve Group-Check | 1 |
| 11***64 | Ring-Back Up | 1 |
| 11***65 | Ring-Back Up | 2 |
127-8394 Valve Gp-Check
| 12***94 | Valve Group-Check; -Tank Port Makeup | 1 |
| 12***95 | Retainer | 2 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 1 |
116-3439 Valve Gp-Check & Relief
| 08***12 | Spring | 1 |
| 08***13 | Poppet, Check | 1 |
| 08***14 | Body | 1 |
6e-4312 Valve Gp-Control
| 10***20 | Retainer (Auxiliary) | 1 |
| 10***11 | Piston | 3 |
| 10***53 | Spacer | 1 |
6e-2810 Valve Gp-Control
| 10***07 | Valve Group-Control | 1 |
| 11***78 | Valve Group-Relief | 2 |
| 4J***80 | Plug (Orifice) | 1 |
111-0352 Valve Gp-Control
| 10***32 | Stem-Track | 2 |
| 10***37 | Stem-Boom | 1 |
| 10***40 | Plug-Orifice | 2 |
6e-5788 Valve Gp-Control
| 11***22 | Housing | 1 |
| 11***39 | Housing | 1 |
| 11***40 | Retainer-Spring | 2 |
142-6092 Valve Gp-Control
| 10***20 | Retainer (Auxiliary) | 3 |
| 10***07 | Spacer; (11.13x6.2x1.95-mm Thk) | 1 |
| 10***11 | Piston | 3 |
109-8218 Valve Gp-Control
| 10***18 | Valve Group-Control | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 3F***45 | Spring | 3 |
111-0353 Valve Gp-Control
| 10***20 | Retainer (Auxiliary) | 3 |
| 10***07 | Spacer; (11.13x6.2x1.95-mm Thk) | 1 |
| 10***11 | Piston | 3 |
7i-0131 Valve Gp-Control
| 09***16 | Seal-O-Ring | 2 |
| 09***17 | Wiper | 2 |
| 09***19 | Seat-Spring | 2 |
087-5081 Valve Gp-Control
| 08***81 | Valve Group-Control | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
109-8215 Valve Gp-Control
| 10***40 | Plug-Orifice | 2 |
| 10***15 | Valve Group-Control | 1 |
| 11***19 | Valve Group-Shuttle | 1 |
7i-8142 Valve Gp-Control
| 08***81 | Valve Group-Control | 1 |
| 7I***85 | Valve Group-Control | 1 |
| 7I***42 | Valve Group-Control | 1 |
7y-5021 Valve Gp-Control
| 08***61 | Plate As | 1 |
| 08***62 | Link | 2 |
| 08***63 | Handle | 2 |
111-0524 Valve Gp-Control
| 11***24 | Valve Group-Control | 1 |
| 11***40 | Retainer-Spring | 2 |
| 12***94 | Valve Group-Check; -Tank Port Makeup | 1 |
105-2823 Valve Gp-Control
| 10***20 | Retainer (Auxiliary) | 3 |
| 10***07 | Spacer; (11.13x6.2x1.95-mm Thk) | 1 |
| 10***11 | Piston | 3 |
7i-1385 Valve Gp-Control
| 09***35 | Tie Rod | 2 |
| 09***36 | Rod | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
106-0907 Valve Gp-Control
| 10***29 | Spring; (Outer) | 1 |
| 10***07 | Valve Group-Control | 1 |
| 1D***58 | Pin | 1 |
120-0113 Valve Gp-Control
| 10***20 | Retainer (Auxiliary) | 2 |
| 10***11 | Piston | 3 |
| 10***53 | Spacer | 1 |
6e-2808 Valve Gp-Control
| 1D***58 | Pin | 1 |
| 1P***07 | Seal-Rectangular | 4 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
142-6091 Valve Gp-Control
| 10***20 | Retainer (Auxiliary) | 2 |
| 10***11 | Piston | 3 |
| 10***53 | Spacer | 1 |
9t-2103 Valve Gp-Control
| 09***32 | Cap | 1 |
| 4J***27 | Seal-O-Ring -Pipe As. To Hydraulic Tank | 1 |
| 6F***55 | Seal --To Manifold Ferrule | 1 |
7y-5020 Valve Gp-Check -Counterweight
| 08***14 | Band As | 2 |
| 08***20 | Band As | 2 |
| 08***87 | Valve Group-Check; -Pilot Operated | 2 |
121-8854 Valve Gp-Main Control
| 08***58 | Hose As (Nom 06, L=550mm) | 1 |
| 11***30 | Valve Group-Reducing; -Signal Duplication | 1 |
| 11***78 | Valve Group-Relief | 1 |
6e-2809 Valve Gp-Main Control
| 08***58 | Hose As (Nom 06, L=550mm) | 2 |
| 08***67 | Hose As (Nom 06, L=700mm) | 1 |
| 11***53 | Valve Group-Control | 1 |
087-4453 Valve Gp-Manifold & Reducing
| 08***53 | Valve Group-Manifold & Reducing | 1 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***92 | Seal-O-Ring (Id=23.70mm) | 1 |
087-5675 Valve Gp-Pilot
| 08***48 | Bolt-Socket Head; (M8x1.25x30-mm)(M8x1.25x30mm) | 2 |
| 08***03 | Plug | 2 |
| 08***04 | Rod | 2 |
6i-6974 Valve Gp-Pilot
| 08***69 | Plate | 1 |
| 09***72 | Plate | 1 |
| 09***76 | Seal | 4 |
121-1814 Valve Gp-Pilot
| 08***48 | Bolt-Socket Head; (M8x1.25x30-mm)(M8x1.25x30mm) | 2 |
| 08***03 | Plug | 2 |
| 08***04 | Rod | 2 |
5i-4279 Valve Gp-Press & Flow Cmpnstr
| 10***10 | Bushing | 1 |
| 4I***98 | Pin | 1 |
| 4I***99 | Roller | 1 |
7i-0034 Valve Gp-Motor Control
| 3E***69 | Seal; (21mm Od) | 1 |
| 7I***34 | Valve Group-Press & Flow Cmpnstr | 1 |
| 7I***59 | Ring-Backup | 1 |
5i-4280 Valve Gp-Press & Flow Cmpnstr
| 10***11 | Retainer | 1 |
| 17***94 | Bushing | 1 |
| 3D***45 | Seal-Bottle To Connector | 1 |
1u-1100 Valve Gp-Pressure Reducing
| 1B***03 | Nut Exhaust Pipe To Starting Engine Cylinder Block | 1 |
| 1U***00 | Valve Group-Pressure Reducing | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 1 |
107-6535 Valve Gp-Pump Control
| 09***52 | Seat, Spring | 1 |
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 5 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 2 |
107-6536 Valve Gp-Pump Control
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 1 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 5 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
111-9996 Valve Gp-Pump Control
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 1 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 5 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
5i-4278 Valve Gp-Pump Control
| 10***09 | Shim | 1 |
| 4I***05 | Spool | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
105-7325 Valve Gp-Pump Control
| 09***52 | Seat, Spring | 1 |
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 4 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 5 |
6e-3857 Valve Gp-Pump Control -Pressure Compensator
| 11***24 | Setscrew | 1 |
| 17***22 | Spring | 1 |
| 20***67 | Piston | 1 |
111-9997 Valve Gp-Pump Control
| 09***52 | Seat, Spring | 1 |
| 09***85 | Ring; (Back Up) | 2 |
| 09***87 | Ring, Back-Up; (Buck Up) | 2 |
111-9995 Valve Gp-Pump Control
| 11***95 | Valve Group-Pump Control; (Pressure, Flow Compensator) | 1 |
| 11***96 | Valve Group-Pump Control | 1 |
| 11***97 | Valve Group-Pump Control; -Pressure Compensator | 1 |
107-6513 Valve Gp-Pump Control
| 10***13 | Valve Group-Pump Control; (Pressure, Flow Compensator) | 1 |
| 10***35 | Valve Group-Pump Control | 1 |
| 10***36 | Valve Group-Pump Control | 1 |
105-7319 Valve Gp-Pump Control
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 1 |
| 08***01 | Plug As | 1 |
| 10***65 | Bolt-Socket Head; (M8x1.25x100-mm) | 5 |
9t-9794 Valve Gp-Reducing
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 4J***68 | Seal--To Seal Sleeve To Pump & Brake Housing | 1 |
| 4J***51 | Seal-O-Ring (Id=17.12mm) | 1 |
114-9030 Valve Gp-Reducing
| 11***30 | Valve Group-Reducing; -Signal Duplication | 1 |
| 12***60 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
114-7328 Valve Gp-Relief
| 11***54 | Valve | 1 |
| 11***55 | Plunger As | 1 |
| 11***04 | Valve Group-Relief | 1 |
128-9090 Valve Gp-Relief
| 12***90 | Valve Group-Relief | 1 |
| 4J***51 | Seal-O-Ring (Id=17.12mm) | 1 |
| 5J***74 | Seal-O-Ring (Id=15.54mm) | 1 |
105-5092 Valve Gp-Relief
| 10***92 | Valve Group-Relief | 1 |
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
117-0479 Valve Gp-Relief
| 09***75 | Pin, Roller | 1 |
| 11***37 | Screen As | 1 |
| 11***75 | Housing | 1 |
111-6873 Valve Gp-Relief
| 11***54 | Valve | 1 |
| 11***73 | Valve Group-Relief | 1 |
| 11***75 | Body As | 1 |
114-7304 Valve Gp-Relief
| 09***75 | Pin, Roller | 1 |
| 11***12 | Housing | 1 |
| 11***04 | Valve Group-Relief | 1 |
9t-8316 Valve Gp-Relief
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 2P***75 | Seal-O-Ring | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
7i-7329 Valve Gp-Relief
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 6F***72 | Seal (.674" Inside Diameter) | 1 |
| 6V***26 | Seal Interface Between Inlet Manifold; Seal (Interface Between Inlet Manifold | 1 |
105-5093 Valve Gp-Relief
| 10***93 | Valve Group-Relief | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
| 3K***63 | Ring | 1 |
4t-5572 Valve Gp-Relief
| 03***67 | Ring; (Back Up) | 1 |
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 2 |
102-0847 Valve Gp-Relief
| 09***02 | Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
117-0478 Valve Gp-Relief
| 11***54 | Valve | 1 |
| 11***73 | Adapter | 1 |
| 11***78 | Valve Group-Relief | 1 |
6e-1761 Valve Gp-Relief
| 10***92 | Body | 1 |
| 2J***89 | Springs | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
105-7283 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 09***85 | Ring; (Back Up) | 1 |
087-5748 Valve Gp-Relief
| 08***48 | Valve Group-Relief | 1 |
| 18***73 | Setscrew; (Socket) | 1 |
| 18***91 | Washer; (1.2-mm Thk) | 1 |
117-5270 Valve Gp-Relief
| 11***54 | Valve | 1 |
| 11***37 | Screen As | 1 |
| 11***70 | Valve Group-Relief; -High Signal Pressure | 1 |
087-5054 Valve Gp-Selector
| 08***73 | Retainer | 1 |
| 08***75 | Lever; (Hydraulic Activation Control) | 1 |
| 08***54 | Valve Group-Selector; -Hydraulic Lockout | 1 |
6e-0008 Valve Gp-Sequence
| 00***41 | Bushing-Shaft | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 1 |
| 3D***03 | Plug-Pipe; (1/16-27 Nptf Thd) | 1 |
102-0801 Valve Gp-Shuttle -Resolver
| 10***01 | Valve Group-Shuttle; -Resolver-Implement Pump | 1 |
| 10***14 | Bushing | 1 |
| 6E***64 | Valve-Shuttle | 1 |
111-0336 Valve Gp-Shuttle
| 11***36 | Valve Group-Shuttle | 1 |
| 11***37 | Valve | 1 |
| 14***03 | Seal-O-Ring | 1 |
131-0753 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
4t-1860 Valve Gp-Shuttle
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
9t-9640 Valve Gp-Shuttle -Ball Resolver
| 1M***18 | Ball | 1 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
| 4T***25 | Seat | 1 |
111-0119 Valve Gp-Shuttle
| 11***19 | Valve Group-Shuttle | 1 |
| 1M***18 | Ball | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
6e-4429 Valve Gp-Shuttle -Ball Resolver
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
7i-1245 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
6i-6826 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
7y-5005 Valve Gp-Solenoid
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7Y***05 | Valve Group-Solenoid | 1 |
102-0725 Valve Gp-Solenoid
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***73 | Seal-O-Ring (Id=5.80mm) | 4 |
4i-6158 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
7i-0124 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 4 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
7t-9746 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 2D***35 | Locknut (Visor To Bracket) | 1 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
4i-6400 Valve Gp-Speed Control
| 09***48 | Bolt, Hexagon Socket | 4 |
| 09***22 | Seal-O-Ring (Id=20.80mm) | 1 |
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 2 |
4i-3700 Valve Gp-Travel Counterbalance
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***01 | Seal-O-Ring (Id=39.40mm) | 2 |
111-9993 Valve Gp-Travel Counterbalance
| 03***82 | Seal-O-Ring; (47.3mm Id) | 2 |
| 08***64 | Plug | 2 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 2 |
Implements
5i-7256 Boom & Bearing As -Long
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***22 | Shim (2.0 mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
102-8664 Boom Ar
| 10***64 | Boom Ar | 1 |
| 10***91 | Film Group | 1 |
| 13***08 | Lines Group-Boom | 1 |
102-8663 Boom Ar
| 10***63 | Boom Ar | 1 |
| 13***07 | Lines Group-Boom | 1 |
| 4I***06 | Cylinder & Seal Group | 2 |
113-5858 Boom Ar-Auxiliary Hydraulic
| 11***58 | Boom Ar-Auxiliary Hydraulic | 1 |
| 11***62 | Film Group | 1 |
| 13***07 | Lines Group-Boom | 1 |
113-5859 Boom Ar-Auxiliary Hydraulic
| 10***91 | Film Group | 1 |
| 11***59 | Boom Ar-Auxiliary Hydraulic | 1 |
| 11***62 | Film Group | 1 |
5i-7260 Boom Gp -Short
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
4i-1106 Boom Gp
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***22 | Shim (2.0 mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
4i-1108 Boom Gp
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
4i-1115 Lines Gp-Grease
| 08***38 | Plate As | 1 |
| 08***39 | Plate | 1 |
| 08***91 | Tube As | 1 |
4i-1107 Lines Gp-Grease
| 08***38 | Plate As | 3 |
| 08***99 | Hose As | 1 |
| 10***44 | Tube As | 1 |
126-0715 Lines Gp-Grease
| 08***38 | Plate As | 1 |
| 08***39 | Plate | 1 |
| 08***98 | Hose As | 1 |
4i-1109 Lines Gp-Grease
| 08***38 | Plate As | 3 |
| 08***99 | Hose As | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 5 |
4i-1111 Lines Gp-Grease
| 08***38 | Plate As | 2 |
| 08***98 | Hose As | 1 |
| 08***66 | Hose As; (L=850mm) | 1 |
107-3599 Linkage Ar-Bucket
| 10***99 | Linkage Ar-Bucket | 1 |
| 10***00 | Linkage Group-Bucket | 1 |
| 4I***09 | Cylinder & Seal Group-Bucket | 1 |
107-2508 Linkage Ar-Bucket
| 10***08 | Linkage Ar-Bucket | 1 |
| 10***09 | Linkage Group-Bucket | 1 |
| 4I***08 | Cylinder & Seal Group-Bucket | 1 |
107-3600 Linkage Gp-Bucket
| 09***47 | Seal-O-Ring; (Id=200.00mm) | 2 |
| 10***00 | Linkage Group-Bucket | 1 |
| 10***01 | Link As-Bearing | 1 |
107-2509 Linkage Gp-Bucket
| 08***79 | Bearing; (Sleeve) | 2 |
| 09***44 | Seal-O-Ring (Id=140.00mm) | 2 |
| 09***49 | Seal-O-Ring (Id=175.00mm) | 2 |
113-4929 Stick Ar
| 10***77 | Stick Group | 1 |
| 11***29 | Stick Ar | 1 |
| 4I***56 | Lines Group-Stick | 1 |
113-4928 Stick Ar
| 10***74 | Stick Group | 1 |
| 11***28 | Stick Ar | 1 |
| 4I***55 | Lines Group-Stick | 1 |
113-4930 Stick Ar
| 10***80 | Stick Group | 1 |
| 11***30 | Stick Ar | 1 |
| 4I***57 | Lines Group-Stick | 1 |
113-4931 Stick Ar
| 10***83 | Stick Group | 1 |
| 11***31 | Stick Ar | 1 |
| 4I***58 | Lines Group-Stick | 1 |
113-4927 Stick Ar
| 10***71 | Stick Group | 1 |
| 11***27 | Stick Ar | 1 |
| 4I***54 | Lines Group-Stick | 1 |
113-4932 Stick Ar
| 10***86 | Stick Group | 1 |
| 11***32 | Stick Ar | 1 |
| 4I***59 | Lines Group-Stick | 1 |
4i-0149 Stick Ar-Hoe
| 4I***49 | Stick Ar-Hoe | 1 |
| 4I***59 | Lines Group-Stick | 1 |
| 4I***20 | Stick Group-Hoe | 1 |
4i-0145 Stick Ar-Hoe
| 4I***45 | Stick Ar-Hoe | 1 |
| 4I***55 | Lines Group-Stick | 1 |
| 4I***12 | Stick Group-Hoe | 1 |
128-8038 Stick Ar-Hoe
| 10***86 | Stick Group | 1 |
| 12***38 | Stick Ar-Hoe | 1 |
| 4I***59 | Lines Group-Stick | 1 |
128-8033 Stick Ar-Hoe
| 10***71 | Stick Group | 1 |
| 12***33 | Stick Ar-Hoe | 1 |
| 4I***54 | Lines Group-Stick | 1 |
126-0711 Stick Ar-Hoe
| 12***11 | Stick Ar-Hoe | 1 |
| 12***12 | Stick Group-Hoe | 1 |
| 12***14 | Lines Group-Stick | 1 |
4i-0144 Stick Ar-Hoe
| 4I***44 | Stick Ar-Hoe | 1 |
| 4I***54 | Lines Group-Stick | 1 |
| 4I***10 | Stick Group-Hoe | 1 |
4i-0147 Stick Ar-Hoe
| 4I***47 | Stick Ar-Hoe | 1 |
| 4I***57 | Lines Group-Stick | 1 |
| 4I***16 | Stick Group-Hoe | 1 |
128-8034 Stick Ar-Hoe
| 10***74 | Stick Group | 1 |
| 12***34 | Stick Ar-Hoe | 1 |
| 4I***55 | Lines Group-Stick | 1 |
4i-0148 Stick Ar-Hoe
| 4I***48 | Stick Ar-Hoe | 1 |
| 4I***58 | Lines Group-Stick | 1 |
| 4I***18 | Stick Group-Hoe | 1 |
128-8035 Stick Ar-Hoe
| 10***77 | Stick Group | 1 |
| 12***35 | Stick Ar-Hoe | 1 |
| 4I***56 | Lines Group-Stick | 1 |
128-8036 Stick Ar-Hoe
| 10***80 | Stick Group | 1 |
| 12***36 | Stick Ar-Hoe | 1 |
| 4I***57 | Lines Group-Stick | 1 |
128-8037 Stick Ar-Hoe
| 10***83 | Stick Group | 1 |
| 12***37 | Stick Ar-Hoe | 1 |
| 4I***58 | Lines Group-Stick | 1 |
4i-0146 Stick Ar-Hoe
| 4I***46 | Stick Ar-Hoe | 1 |
| 4I***56 | Lines Group-Stick | 1 |
| 4I***14 | Stick Group-Hoe | 1 |
5i-7272 Stick Gp
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
5i-7268 Stick Gp
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
109-6174 Stick Gp
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
109-6180 Stick Gp
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
109-6171 Stick Gp
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
109-6183 Stick Gp
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***22 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
5i-7264 Stick Gp -Long
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
109-6177 Stick Gp
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
5i-7280 Stick Gp -Medium
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***22 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
5i-7284 Stick Gp -Short
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***22 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
5i-7276 Stick Gp
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
109-6186 Stick Gp
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***22 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
126-0712 Stick Gp-Hoe
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
4i-1116 Stick Gp-Hoe
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
4i-1112 Stick Gp-Hoe
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
4i-1114 Stick Gp-Hoe
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
4i-1110 Stick Gp-Hoe
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
4i-1118 Stick Gp-Hoe
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***22 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
4i-1120 Stick Gp-Hoe
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***22 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
Lubrication System
4p-7096 Base Gp-Oil Filter
| 03***51 | Elbow )-Inlet Port To Valve Group | 1 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 2 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 1 |
1p-4244 Breather Gp
| 1P***44 | Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 3H***43 | Bolt,Machine Breather Assembly To Cover | 1 |
7y-2021 Breather Gp
| 4I***01 | Hose | 1 |
| 7X***92 | Capscrew; (Hex Head) (3/8-16x4 1/2 G8 Z) | 1 |
| 7Y***18 | Hose (50cm); (60 cm) | 0 |
110-7735 Filler Gp-Engine Oil
| 11***35 | Filler Group-Engine Oil | 1 |
| 13***39 | Filler As-Oil | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
4p-7093 Filter Gp-Engine Oil
| 03***35 | Connector-Flared | 1 |
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 03***44 | Elbow; (Swivel - 37 Degree Flared) | 1 |
9y-6105 Gauge Gp-Oil Level (Dipstick)
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1D***33 | Bolt 5.72 cm(2.25 In.) Long | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
2p-6105 Lines Gp-Engine Oil
| 0L***64 | Lock --To Reverse Driven Gear Splash Pan; -- To Reverse Driven Gear Splash Pan | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
6i-6348 Lines Gp-Engine Oil Drain
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
| 5P***43 | Hose 34 cm (13.39 In.) | 0 |
| 6I***48 | Lines Group-Engine Oil Drain | 1 |
6i-0426 Lines Gp-Turbocharger Oil
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
4p-9506 Lines Gp-Turbocharger Oil
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 10***68 | Hose As | 1 |
7y-2163 Mounting Gp-Engine Oil Filter
| 7Y***63 | Mounting Group-Engine Oil Filter | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
| 8T***85 | Bolt (M10x1.5x50mm); (M10x1.5x50-mm) | 4 |
7y-1821 Oil Change Gp-High Speed
| 2A***98 | Gasket | 1 |
| 3R***17 | Bushing-Plug | 1 |
| 7Y***21 | Oil Change Group-High Speed | 1 |
2p-1784 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 2P***84 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
6i-1346 Pump Gp-Engine Oil
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 3 |
| 1B***09 | Key,Woodruff No. 10 Oil Pump | 1 |
| 1F***06 | Dowel | 1 |
106-8957 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 10***57 | Pump Group-Engine Oil | 1 |
6n-2642 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 1P***46 | Washer-Hard; (10.2x35x6-mm Thk) | 1 |
| 6I***46 | Pump Group-Engine Oil | 1 |
106-8958 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 10***58 | Pump Group-Engine Oil | 1 |
| 1P***46 | Washer-Hard; (10.2x35x6-mm Thk) | 1 |
Machine Arrangement
123-4316 Special Ar-Material Handler
| 10***52 | Grommet | 1 |
| 12***24 | Frame Arrangement-Undercarriage | 1 |
| 12***16 | Special Arrangement-Excavator | 1 |
Operator Station
110-0985 Air Conditioner & Mounting Gp
| 10***88 | Filter Element-Cab Air; (Air Conditioner/Cab Heater) | 1 |
| 10***89 | Cover | 1 |
| 10***90 | Duct As | 1 |
106-1824 Air Conditioner Ar
| 10***24 | Air Conditioner Ar | 1 |
| 10***88 | Lines Group-Air Conditioner | 1 |
| 10***90 | Duct Group-Air | 1 |
131-3811 Air Conditioner Gp
| 10***26 | Wheel As-Blower | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 8 |
107-1994 Air Conditioner Gp
| 06***93 | Grommet; (Rh) | 1 |
| 10***94 | Air Conditioner Group | 1 |
| 10***95 | Heater Group | 1 |
106-1823 Cab & Mounting Gp
| 10***23 | Cab & Mounting Group | 1 |
| 10***48 | Cover As | 1 |
| 11***58 | Plate | 2 |
106-3899 Cab Ar
| 10***99 | Cab Ar | 1 |
| 10***47 | Cab Group | 1 |
| 10***48 | Door Group-Cab | 1 |
129-2377 Cab Ar
| 12***77 | Cab Ar | 1 |
| 13***94 | Door Group-Cab; (Cab) | 1 |
| 13***95 | Window Group-Front; (Front) | 1 |
107-1847 Cab Gp
| 03***12 | Screw-Forming; (10-24x0.5-In) | 5 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
133-8823 Cab Gp
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
| 10***57 | Strip; (Locking) (275cm) | 0 |
101-1759 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 1 |
| 10***47 | Coil Assem. | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
134-3997 Compressor Gp-Refrigerant
| 13***97 | Compressor Group-Refrigerant | 1 |
| 3E***58 | Compressor Group-Refrigerant | 1 |
| 7T***32 | Plug Assem.; (3/8-24) | 1 |
110-6437 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 1 |
| 11***37 | Compressor Group-Refrigerant | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
110-7836 Condenser & Mtg Gp-Refrigerant
| 11***36 | Condenser & Mtg Group-Refrigerant | 1 |
| 14***61 | Condenser As | 1 |
| 14***03 | Support As | 1 |
5i-3837 Console Gp-Operator
| 09***09 | Adjuster | 2 |
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 1 |
| 10***09 | Cover | 1 |
111-6358 Console Gp-Operator
| 09***09 | Adjuster | 2 |
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 1 |
| 10***09 | Cover | 1 |
111-6357 Console Gp-Operator
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***57 | Console Group-Operator | 1 |
| 11***58 | Console Group-Lh | 1 |
7y-9547 Console Gp-Operator
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 3W***37 | Rod | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 2 |
7y-9391 Console Gp-Operator
| 09***09 | Adjuster | 2 |
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 1 |
| 10***09 | Cover | 1 |
116-4939 Control Gp-Hydraulic Pedal
| 08***75 | Valve Group-Pilot | 1 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 10***10 | Pedal As | 1 |
7y-6002 Control Gp-Hydraulic Pedal
| 08***75 | Valve Group-Pilot | 1 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 5I***90 | Chain As | 1 |
6i-6945 Control Gp-Joystick
| 08***89 | Grommet | 1 |
| 08***70 | Sleeve | 2 |
| 6I***51 | Control Group-Pilot Operated Hydraulic; -Mass Excavator Lh | 1 |
6i-6954 Control Gp-Joystick
| 08***89 | Grommet | 1 |
| 08***70 | Sleeve | 2 |
| 6I***52 | Control Group-Pilot Operated Hydraulic; -Mass Excavator Rh | 1 |
6i-5352 Control Gp-Handle
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 11***29 | Lever | 1 |
| 6I***88 | Switch As-Push; (One Touch-Low Idle) | 1 |
7y-3425 Control Gp-Pilot Operated Hyd
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 4 |
| 09***31 | Nut; (M12x1.75-Thd) | 2 |
| 09***32 | Knob; (Lh Travel Lever) | 1 |
6i-5351 Control Gp-Handle
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 11***29 | Lever | 1 |
| 6I***88 | Switch As-Push; (One Touch-Low Idle) | 1 |
4i-6631 Cover Gp-Storage
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 10***89 | Nut Assem.; (M6x1) | 3 |
| 3E***20 | Screw; (M3x0.5x10-mm) | 2 |
107-1848 Door Gp-Cab
| 09***58 | Screw-Machine; (M6x1x14-mm) | 2 |
| 10***48 | Door Group-Cab | 1 |
| 10***94 | Window | 1 |
130-5594 Door Gp-Cab
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 6 |
| 10***61 | Guard | 1 |
| 11***20 | Straiker Bolt; (Striker) | 1 |
107-1990 Duct Gp-Cab Air
| 10***90 | Duct Group-Air | 1 |
| 10***88 | Hose | 1 |
| 10***89 | Duct | 1 |
107-5687 Duct Gp-Defroster
| 10***87 | Duct Group-Defroster | 1 |
| 12***66 | Hose As | 1 |
| 4I***93 | Clamp | 1 |
130-5424 Guard Ar-Overhead
| 12***90 | Guard Group-Overhead; -Cab | 1 |
| 13***69 | Lighting Group-Flood | 1 |
| 13***24 | Guard Ar-Overhead | 1 |
132-8077 Guard Gp-Front Window
| 13***77 | Guard Group-Front Window | 1 |
| 13***47 | Frame As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
6c-8621 Guard Gp-Front Window
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
| 5G***17 | Bumper-Conical; (L.H.) | 2 |
| 6C***21 | Guard Group-Front Window | 1 |
127-0290 Guard Gp-Overhead
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***24 | Spring As; (Gas) | 2 |
| 12***66 | Guard As; (Front) | 1 |
6c-8277 Guard Gp-Overhead
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 10***57 | Plate-Warning; (English) | 1 |
| 11***24 | Spring As; (Gas) | 2 |
112-7468 Guard Gp-Overhead
| 11***68 | Guard Group-Overhead | 1 |
| 6C***77 | Guard Group-Overhead | 1 |
| 6C***15 | Lighting Group | 1 |
129-2136 Guard Gp-Vandalism
| 11***32 | Boss | 1 |
| 11***33 | Plate As | 1 |
| 12***36 | Guard Group-Vandalism | 1 |
110-4823 Guard Gp-Vandalism
| 11***23 | Guard Group-Vandalism | 1 |
| 11***24 | Plate As | 3 |
| 11***33 | Plate As | 1 |
107-1995 Heater Gp-Cab
| 10***43 | Plate-Orifice | 2 |
| 10***26 | Wheel As-Blower | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
7y-8196 Horn Gp-Electric
| 7T***69 | Horn As; (24-Volt, Low Tone) | 1 |
| 7T***70 | Horn As; (24-Volt, High Tone) | 1 |
| 7Y***96 | Horn Group-Electric | 1 |
107-1988 Lines Gp-Air Conditioner
| 09***61 | Strap; (Cable) | 2 |
| 10***89 | Accumulator-Air Conditioner, . Gear; Ring | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
106-2769 Lines Gp-Heater
| 10***69 | Lines Group-Heater | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
| 5P***67 | Hose (.625 In. I.D.)17.02 Dm(67 In.) | 0 |
7y-0059 Literature Gp
| 09***45 | Cable; (Lanyard) | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
7y-9535 Mirror Gp-Rear View
| 4I***27 | Bracket As | 1 |
| 4I***64 | Support As | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 6 |
102-7891 Module Gp-Monitor
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***91 | Module Group-Monitor | 1 |
147-7978 Motor Gp-Window Wiper -Front, Upper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***78 | Motor Group-Window Wiper; -Front, Upper | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
126-4928 Motor Gp-Window Wiper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***28 | Motor Group-Window Wiper | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
106-1829 Operator Ar
| 08***64 | Support Group-Seat | 1 |
| 10***23 | Cab & Mounting Group | 1 |
| 10***24 | Air Conditioner Ar | 1 |
112-8585 Platform Gp-Operator
| 09***68 | Grommet | 2 |
| 10***57 | Platform As | 1 |
| 10***01 | Floor Mat | 1 |
132-8078 Screen Gp-Sun
| 11***88 | Hook | 8 |
| 13***78 | Screen Group-Sun; -Cab | 1 |
| 13***22 | Roller Blind As | 1 |
8y-6856 Seat Belt Gp
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
100-7677 Seat Gp
| 03***21 | Spacer | 4 |
| 10***77 | Seat Group | 1 |
| 10***38 | Handle; (Reclining-Rh) | 1 |
9u-4365 Seat Gp
| 10***77 | Seat Group | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
| 8Y***56 | Seat Belt Group | 1 |
6i-5381 Seat Gp
| 10***40 | Handle-Adjustment; (Lumbar) | 1 |
| 18***57 | Kit-Support | 1 |
| 6I***80 | Kit-Foam Back; (Seat) | 1 |
087-5864 Support Gp-Seat
| 08***64 | Support Group-Seat | 1 |
| 5I***95 | Cover | 1 |
| 5I***96 | Support As | 1 |
4i-9797 Suspension Gp-Seat
| 4I***97 | Suspension Group-Seat | 1 |
| 8Y***04 | Kit-Damper | 1 |
| 8Y***05 | Kit-Bumper | 1 |
8r-1774 Tank Gp-Window Washer
| 3W***98 | Cap; (Window Washer Tank Fill) | 1 |
| 3W***99 | Packing | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
110-4852 Visor Gp-Protection
| 11***52 | Visor Group-Protection | 1 |
| 11***53 | Support As | 1 |
| 11***55 | Support As | 1 |
6w-9972 Washer Gp-Window
| 10***84 | Cap-Reservoir | 1 |
| 5C***40 | Reservoir | 1 |
| 5C***41 | Support As | 1 |
134-1248 Washer Gp-Window
| 13***48 | Washer Group-Window | 1 |
| 4I***58 | Support As-Window Washer | 1 |
| 5P***15 | Hose 29.5 cm(11.62 In) | 64 |
6c-9202 Washer Gp-Window
| 4I***40 | Joint | 1 |
| 5P***92 | Hose 4.13 M(162.5 In.); 200.0mm(7.88in) Lg | 0 |
| 6C***02 | Washer Group-Window | 1 |
146-6231 Window Gp-Door
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 09***57 | Screw-Machine; (M5x0.8x5.2-mm) | 3 |
| 14***31 | Window Group-Door; (Door) | 1 |
130-5595 Window Gp-Front
| 11***85 | Bumper | 2 |
| 11***05 | Ring | 2 |
| 11***33 | Bearing-Ball | 2 |
107-1890 Window Gp-Front
| 10***90 | Window Group-Front | 1 |
| 11***95 | Screw-Hex Socket; (M6x1.0x16mm) | 4 |
| 11***96 | Screw-Hex Socket | 4 |
6c-8659 Window Gp-Front
| 03***12 | Screw-Forming; (10-24x0.5-In) | 3 |
| 10***90 | Window Group-Front | 1 |
| 10***22 | Washer | 4 |
107-9411 Wiper & Monitor Gp-Window
| 03***12 | Screw-Forming; (10-24x0.5-In) | 2 |
| 10***91 | Module Group-Monitor | 1 |
| 10***34 | Support | 1 |
6c-9448 Wiper & Washer Gp-Window
| 11***60 | Nozzle-Water | 1 |
| 2V***16 | Clip; (9.52mm Id) | 2 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
134-1250 Wiper & Washer Gp-Window
| 12***40 | Blade As-Wiper; (330-mm)(Front) | 1 |
| 13***50 | Wiper & Washer Group-Window | 1 |
| 15***70 | Arm | 1 |
101-0742 Wiper Pivot Gp
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 20***23 | Cap; (Wiper) | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
Power Train
7i-0035 Brake Gp-Parking
| 12***33 | Ring | 3 |
| 13***55 | Seal-Piston As; (Includes Seals) | 1 |
| 13***56 | Kit-Screw; (Parking Brake) | 1 |
105-8078 Drive Gp-Final
| 09***84 | Washer; (40.3x72x1-mm Thk) | 6 |
| 09***16 | Bearing-Roller As | 3 |
| 09***91 | Pin - Spring | 7 |
7y-1802 Drive Gp-Final
| 09***84 | Washer; (40.3x72x1-mm Thk) | 6 |
| 09***16 | Bearing-Roller As | 3 |
| 09***91 | Pin - Spring | 7 |
135-8870 Drive Gp-Final
| 09***84 | Washer; (40.3x72x1-mm Thk) | 6 |
| 09***16 | Bearing-Roller As | 3 |
| 09***91 | Pin - Spring | 7 |
140-8626 Final Drive Gp
| 13***70 | Drive Group-Final | 1 |
| 14***26 | Final Drive Group | 1 |
7y-1801 Final Drive Gp
| 08***64 | Motor & Mtg Group-Travel | 1 |
| 7Y***01 | Final Drive Group | 1 |
| 7Y***02 | Drive Group-Final | 1 |
135-8869 Final Drive Gp
| 08***64 | Motor & Mtg Group-Travel | 1 |
| 13***69 | Final Drive Group | 1 |
| 13***70 | Drive Group-Final | 1 |
7y-1804 Sprocket Gp
| 2B***61 | Cork-- Compression Release Shaft Hole | 2 |
| 7X***75 | Bolt; (M24x3x60-mm) | 20 |
| 7Y***04 | Sprocket Group | 1 |
Service Equipment And Supplies
108-6677 Film Gp
| 10***77 | Film Group | 1 |
| 6I***34 | Film-Instruction (Hydraulic Hammer) | 1 |
| 7I***65 | Film-Notice; (Hammer, Read Omm)(English) | 1 |
104-5891 Film Gp
| 10***91 | Film Group | 1 |
| 11***53 | Film - Me; (Mass Excavation) | 2 |
118-3362 Film Gp
| 10***71 | Film-Identification; (Cat) | 2 |
| 11***62 | Film Group | 1 |
8f-9866 Grease Gun Gp
| 19***70 | Coupler As-Hydraulic | 1 |
| 8F***66 | Grease Gun As | 1 |
| 9F***36 | Nozzle Assem. | 1 |
105-6936 Plate & Film Gp
| 10***23 | Film-Warning; (High Pressure Cylinder) | 1 |
| 10***36 | Plate & Film Group | 1 |
| 10***46 | Film-Instruction; (Counterweight) | 1 |
105-6931 Plate & Film Gp
| 10***20 | Film-Warning; (High Pressure Cylinder) | 1 |
| 10***31 | Plate & Film Group | 1 |
| 13***93 | Film-Identification; (Fuse Panel) | 1 |
105-2356 Plate & Film Gp
| 10***71 | Film (Circuit Breaker) | 1 |
| 10***28 | Film-Warning; (High Pressure Cylinder)(Warning) | 1 |
| 10***40 | Film (Stripe) | 2 |
105-6929 Plate & Film Gp
| 10***19 | Film-Warning; (High Pressure Cylinder) | 1 |
| 10***29 | Plate & Film Group | 1 |
| 13***92 | Film-Identification; (Fuse Panel) | 1 |
105-6930 Plate & Film Gp
| 10***02 | Film-Instruction | 1 |
| 10***20 | Film-Warning; (High Pressure Cylinder) | 1 |
| 10***30 | Plate & Film Group | 1 |
119-7856 Plate & Film Gp
| 11***42 | Film-Warning; (Travel Control) | 1 |
| 11***44 | Film-Notice; (Engine Start Switch) | 1 |
| 11***79 | Plate-Warning | 1 |
105-6937 Plate & Film Gp
| 10***23 | Film-Warning; (High Pressure Cylinder) | 1 |
| 10***37 | Plate & Film Group | 1 |
| 13***94 | Film-Identification; (Fuse Panel) | 1 |
105-2351 Plate & Film Gp
| 10***28 | Film-Warning; (High Pressure Cylinder)(Warning) | 1 |
| 10***40 | Film (Stripe) | 2 |
| 10***51 | Plate & Film Group | 1 |
105-6928 Plate & Film Gp
| 10***19 | Film-Warning; (High Pressure Cylinder) | 1 |
| 10***28 | Plate & Film Group | 1 |
| 10***88 | Film-Instruction; (Counterweight Removal) | 1 |
9u-7550 Tool Gp
| 9U***12 | Wrench; (55 mm Box) | 1 |
| 9U***50 | Tool Group | 1 |
9u-5088 Tool Gp-Hand
| 1P***51 | Pin-Spring | 1 |
| 1U***70 | Wrench; (1.5-In) | 1 |
| 1U***13 | Ratchet-Reverse | 1 |
Undercarriage
4e-8934 Frame Ar-Undercarriage
| 4E***34 | Frame Ar-Undercarriage | 1 |
| 7Y***32 | Idler Group-Front | 1 |
| 7Y***37 | Roller Ar-Track & Carrier | 1 |
4e-8931 Frame Ar-Undercarriage
| 10***53 | Track Ar | 2 |
| 4E***31 | Frame Ar-Undercarriage | 1 |
| 4I***02 | Frame Group-Undercarriage | 1 |
123-2824 Frame Ar-Undercarriage
| 12***02 | Frame Group; Frame Gp - Undercarriage | 1 |
| 12***24 | Frame Arrangement-Undercarriage | 1 |
| 12***29 | Guard Group; -Custom | 1 |
122-9102 Frame Gp-Undercarriage
| 10***47 | Plug | 8 |
| 10***13 | Support-Step; (Rubber) | 2 |
| 12***02 | Frame Group; Frame Gp - Undercarriage | 1 |
7y-9022 Frame Gp-Undercarriage
| 10***47 | Plug | 8 |
| 10***06 | Spacer; (37x70x50-mm Thk) | 8 |
| 11***79 | Frame As-Track Roller; (Rh) | 1 |
4i-1102 Frame Gp-Undercarriage
| 10***47 | Plug | 8 |
| 10***06 | Spacer; (37x70x50-mm Thk) | 8 |
| 10***13 | Support-Step; (Rubber) | 2 |
7i-0378 Frame Gp-Undercarriage
| 10***48 | Spacer | 4 |
| 7I***78 | Frame Group-Undercarriage | 1 |
123-2829 Guard Gp-Travel Motor
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 56 |
| 10***31 | . Drum, Cover As; (Upper) | 1 |
| 10***34 | Cover As; (Lower) | 1 |
4i-5150 Guard Gp-Track Guide
| 10***22 | Support As | 8 |
| 10***24 | Support As | 8 |
| 11***85 | Frame As-Track Roller; (Lh) | 1 |
7y-9521 Guard Gp-Track Guide
| 4I***06 | Guard As | 2 |
| 7X***75 | Bolt; (M24x3x60-mm) | 8 |
| 7Y***21 | Guard Group-Track Guide | 1 |
7y-9524 Guard Gp-Track Guide
| 09***10 | Washer-Hard | 16 |
| 4I***17 | Guard As | 4 |
| 7X***75 | Bolt; (M24x3x60-mm) | 16 |
4i-5149 Guard Gp-Track Guide
| 10***22 | Support As | 2 |
| 10***24 | Support As | 12 |
| 11***83 | Frame As-Track Roller; (Lh) | 1 |
4i-1105 Guard Gp-Travel Motor
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 56 |
| 10***31 | . Drum, Cover As; (Upper) | 1 |
| 10***34 | Cover As; (Lower) | 1 |
7y-9522 Guard Gp-Travel Motor
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 50 |
| 10***31 | . Drum, Cover As; (Upper) | 1 |
| 10***34 | Cover As; (Lower) | 1 |
7y-1805 Idler Gp-Front
| 10***53 | Idler Group-Front | 1 |
| 11***01 | Spring Group-Recoil | 1 |
| 7Y***05 | Idler Group-Front | 1 |
7y-1632 Idler Gp-Front
| 09***80 | Setscrew; (Socket) (M16x2x20mm) | 4 |
| 7Y***32 | Idler Group-Front | 1 |
| 7Y***35 | Track Adjuster & Recoil Group; (Lh) | 2 |
7y-1633 Idler Gp-Front
| 09***09 | Pin | 2 |
| 10***67 | Seal Group-Duo-Cone | 2 |
| 2H***34 | Seal Transfer Pump To Plate | 2 |
102-8153 Idler Gp-Front
| 09***09 | Pin | 2 |
| 10***53 | Idler Group-Front | 1 |
| 10***68 | Seal Group-Duo-Cone | 2 |
8e-6089 Link As-Track
| 8E***89 | Link As-Track | 1 |
| 8E***91 | Link-Track (Rh) | 47 |
| 8E***92 | Link-Track (Lh) | 47 |
8e-6090 Link As-Track
| 8E***90 | Link As-Track; Link As.-Track | 1 |
| 8E***91 | Link-Track (Rh) | 51 |
| 8E***92 | Link-Track (Lh) | 51 |
7y-1638 Roller Ar-Track & Carrier
| 10***14 | Roller Group-Track-Single Flange | 18 |
| 7X***84 | Bolt; (M30x3.5x140-mm) | 6 |
| 7Y***38 | Roller Ar-Track & Carrier | 1 |
7y-1637 Roller Ar-Track & Carrier
| 10***14 | Roller Group-Track-Single Flange | 16 |
| 7X***84 | Bolt; (M30x3.5x140-mm) | 6 |
| 7Y***37 | Roller Ar-Track & Carrier | 1 |
8e-4623 Roller Gp-Track Carrier
| 09***55 | Ring-Toric | 2 |
| 4H***05 | Packing,Preformed Part Of Kit P/N 4s***42 | 1 |
| 6Y***71 | Bearing-Carrier Roller | 1 |
142-6942 Roller Gp-Track-Single Flange
| 10***80 | Seal Group-Duo-Cone | 2 |
| 14***42 | Roller Group-Track-Single Flange | 1 |
| 14***43 | Roller & Bearing As | 1 |
109-1214 Roller Gp-Track-Single Flange
| 10***80 | Seal Group-Duo-Cone | 2 |
| 10***14 | Roller Group-Track-Single Flange | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
134-1014 Roller Gp-Track-Single Flange
| 10***80 | Seal Group-Duo-Cone | 2 |
| 13***14 | Roller Group-Track-Single Flange | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 2 |
8e-4288 Roller Gp-Track-Single Flange
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 2 |
| 5G***47 | Stopper; (Rubber) | 1 |
| 6Y***73 | Plug; (Clear) | 1 |
7y-1634 Spring Gp-Recoil
| 7Y***21 | Strip | 1 |
| 7Y***59 | Washer; (66x115x9-mm Thk) | 1 |
| 7Y***60 | Nut; (M64x6.0-Thd) | 1 |
115-6401 Spring Gp-Recoil
| 11***00 | Spring | 1 |
| 11***01 | Spring Group-Recoil | 1 |
| 11***02 | Support As | 1 |
7y-1635 Adjustment Gp-Hydraulic Track
| 09***37 | Seal-Lip Type | 1 |
| 09***09 | Ring-Back Up; (Backup) | 2 |
| 09***25 | Seal-O-Ring (Id=89.60mm) | 2 |
104-6553 Track Ar
| 10***48 | Spacer | 2 |
| 10***53 | Track Ar | 1 |
| 8E***09 | Track Group | 1 |
8e-6106 Track Gp
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 188 |
| 8E***89 | Link As-Track | 1 |
| 8E***98 | Shoe-Track | 47 |
8e-6108 Track Gp
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 188 |
| 8E***89 | Link As-Track | 1 |
| 8E***99 | Shoe-Track | 47 |
8e-6112 Track Gp
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 188 |
| 8E***89 | Link As-Track | 1 |
| 8E***01 | Shoe-Track | 47 |
108-4606 Track Gp
| 10***05 | Shoe-Track | 47 |
| 10***06 | Track Group | 1 |
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 188 |
1q-4775 Track Gp -850 Triple Grouser Shoe
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 204 |
| 1Q***74 | Shoe-Track | 51 |
| 1Q***75 | Track Group; -850 Triple Grouser Shoe | 1 |
108-4607 Track Gp
| 10***05 | Shoe-Track | 51 |
| 10***07 | Track Group | 1 |
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 204 |
6i-8773 Track Gp
| 6I***73 | Track Group | 1 |
| 8E***12 | Track Group | 1 |
6i-8779 Track Gp
| 6I***79 | Track Group | 1 |
| 8E***13 | Track Group | 1 |
8e-6109 Track Gp
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 204 |
| 8E***90 | Link As-Track; Link As.-Track | 1 |
| 8E***99 | Shoe-Track | 51 |
6i-8769 Track Gp
| 6I***69 | Track Group | 1 |
| 8E***08 | Track Group | 1 |
8e-6113 Track Gp
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 204 |
| 8E***90 | Link As-Track; Link As.-Track | 1 |
| 8E***01 | Shoe-Track | 0 |
8e-6107 Track Gp
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 204 |
| 8E***90 | Link As-Track; Link As.-Track | 1 |
| 8E***98 | Shoe-Track | 51 |
Work Tools
159-0466 Adapter-Tip -G.E.T.
| 15***66 | Adapter-Tip; -G.E.T. | 1 |
159-0465 Adapter-Tip -G.E.T.
| 15***65 | Adapter-Tip; -G.E.T. | 1 |
159-0464 Adapter-Tip -G.E.T.
| 15***64 | Adapter-Tip; -G.E.T. | 1 |
087-5960 Adjuster Gp-Bucket
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***51 | Plate | 1 |
| 16***92 | Flange | 1 |
4i-4070 Adjuster Gp-Bucket -G/U/V/Tb-Family
| 13***52 | Plate | 1 |
| 16***93 | Flange | 1 |
| 4I***39 | Shim (1. 0mm Thick) | 6 |
163-6031 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 16***31 | Bucket & Adjuster Group | 1 |
| 16***35 | Bucket As-Heavy Duty Rock | 1 |
136-6241 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***41 | Bucket & Adjuster Group | 1 |
| 13***48 | Bucket As-Excavation | 1 |
145-8070 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 14***70 | Bucket & Adjuster Group | 1 |
| 14***76 | Bucket As-General Purpose | 1 |
145-8071 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 14***71 | Bucket & Adjuster Group | 1 |
| 14***77 | Bucket As-General Purpose | 1 |
219-9031 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 21***37 | Bucket As-Heavy Duty Rock | 1 |
| 21***31 | Bucket & Adjuster Group | 1 |
219-9028 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 21***34 | Bucket As-Heavy Duty Rock | 1 |
| 21***28 | Bucket & Adjuster Group | 1 |
134-5514 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***14 | Bucket & Adjuster Group | 1 |
| 13***17 | Bucket As-General Purpose | 1 |
136-6246 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***46 | Bucket & Adjuster Group | 1 |
| 13***53 | Bucket As-Excavation | 1 |
138-9673 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***40 | Bucket As-Excavation | 1 |
| 13***73 | Bucket & Adjuster Group | 1 |
219-9026 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 21***32 | Bucket As-General Purpose | 1 |
| 21***26 | Bucket & Adjuster Group | 1 |
145-8068 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 14***68 | Bucket & Adjuster Group | 1 |
| 14***74 | Bucket As-General Purpose | 1 |
105-3596 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 10***96 | Bucket & Adjuster Group | 1 |
| 10***97 | Bucket As-Trenching | 1 |
105-3571 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 10***71 | Bucket & Adjuster Group | 1 |
| 10***72 | Bucket As-Trenching | 1 |
123-8784 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 12***97 | Bucket As-Trenching | 1 |
| 12***84 | Bucket & Adjuster Group | 1 |
6i-5050 Bucket & Adjuster Gp
| 4I***70 | Adjuster Group-Bucket; -G/U/V/Tb-Family | 1 |
| 4I***71 | Bucket As-Mass Excavator | 1 |
| 6I***50 | Bucket & Adjuster Group | 1 |
145-8067 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 14***67 | Bucket & Adjuster Group | 1 |
| 14***73 | Bucket As-General Purpose | 1 |
138-4714 Bucket & Adjuster Gp
| 13***14 | Bucket & Adjuster Group | 1 |
| 13***16 | Bucket As-Excavation | 1 |
| 4I***70 | Adjuster Group-Bucket; -G/U/V/Tb-Family | 1 |
206-0389 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 20***89 | Bucket & Adjuster Group | 1 |
| 20***17 | Bucket As-Heavy Duty Rock | 1 |
142-4285 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 14***85 | Bucket & Adjuster Group | 1 |
| 14***90 | Bucket As-Heavy Duty Rock | 1 |
219-9024 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 21***30 | Bucket As-Heavy Duty Rock | 1 |
| 21***24 | Bucket & Adjuster Group | 1 |
136-6240 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***40 | Bucket & Adjuster Group | 1 |
| 13***47 | Bucket As-Excavation | 1 |
149-7549 Bucket & Adjuster Gp
| 14***49 | Bucket & Adjuster Group | 1 |
| 14***50 | Bucket As-General Purpose | 1 |
| 4I***70 | Adjuster Group-Bucket; -G/U/V/Tb-Family | 1 |
216-5490 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 21***30 | Bucket As-Heavy Duty Rock | 1 |
| 21***90 | Bucket & Adjuster Group | 1 |
251-6853 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 23***14 | Adapter-Tip; (K-110, 2-Strap, Center)(Center) | 5 |
| 23***15 | Adapter-Tip; (K-110, 2-Strap, Rh) | 1 |
143-5412 Bucket & Adjuster Gp
| 14***12 | Bucket & Adjuster Group | 1 |
| 14***13 | Bucket As-Heavy Duty Rock | 1 |
| 4I***70 | Adjuster Group-Bucket; -G/U/V/Tb-Family | 1 |
105-3551 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 10***51 | Bucket & Adjuster Group | 1 |
| 10***52 | Bucket As-Trenching | 1 |
122-9460 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 12***60 | Bucket & Adjuster Group | 1 |
| 12***61 | Bucket As-Trenching | 1 |
219-9025 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 21***31 | Bucket As-Heavy Duty Rock | 1 |
| 21***25 | Bucket & Adjuster Group | 1 |
106-8854 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 10***54 | Bucket & Adjuster Group | 1 |
| 10***27 | Bucket As-Rock | 1 |
105-3582 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 10***82 | Bucket & Adjuster Group | 1 |
| 10***83 | Bucket As-Trenching | 1 |
208-0102 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 20***02 | Bucket & Adjuster Group | 1 |
| 20***03 | Bucket As-Heavy Duty | 1 |
219-9029 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 21***35 | Bucket As-Heavy Duty Rock | 1 |
| 21***29 | Bucket & Adjuster Group | 1 |
105-3613 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 10***13 | Bucket & Adjuster Group | 1 |
| 10***14 | Bucket As-Trenching | 1 |
136-6243 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***43 | Bucket & Adjuster Group | 1 |
| 13***50 | Bucket As-Excavation | 1 |
6i-5042 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 4I***00 | Bucket As-Excavation; (Excavation) | 1 |
| 6I***42 | Bucket & Adjuster Group | 1 |
206-0395 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 20***95 | Bucket & Adjuster Group | 1 |
| 20***23 | Bucket As-Heavy Duty | 1 |
136-6242 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***42 | Bucket & Adjuster Group | 1 |
| 13***49 | Bucket As-Excavation | 1 |
136-6244 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***44 | Bucket & Adjuster Group | 1 |
| 13***51 | Bucket As-Excavation | 1 |
138-9672 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***39 | Bucket As-Excavation; -F-Family | 1 |
| 13***72 | Bucket & Adjuster Group | 1 |
206-0390 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 20***90 | Bucket & Adjuster Group | 1 |
| 20***18 | Bucket As-Heavy Duty | 1 |
134-5513 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***13 | Bucket & Adjuster Group | 1 |
| 13***16 | Bucket As-General Purpose | 1 |
146-0221 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 14***21 | Bucket & Adjuster Group | 1 |
| 14***23 | Bucket As-General Purpose | 1 |
134-5515 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***15 | Bucket & Adjuster Group | 1 |
| 13***18 | Bucket As-Excavation | 1 |
145-8066 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 14***66 | Bucket & Adjuster Group | 1 |
| 14***72 | Bucket As-General Purpose | 1 |
163-6032 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 16***32 | Socket, Bucket & Adjuster Group | 1 |
| 16***36 | Bucket As-Heavy Duty Rock | 1 |
145-8069 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 14***69 | Bucket & Adjuster Group | 1 |
| 14***75 | Bucket As-General Purpose | 1 |
138-4687 Bucket & Adjuster Gp
| 13***87 | Bucket & Adjuster Group | 1 |
| 13***15 | Bucket As-Excavation | 1 |
| 4I***70 | Adjuster Group-Bucket; -G/U/V/Tb-Family | 1 |
136-6245 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 13***45 | Bucket & Adjuster Group | 1 |
| 13***52 | Bucket As-Excavation | 1 |
6i-5071 Bucket & Adjuster Gp
| 10***15 | Bucket As-Excavation | 1 |
| 11***09 | Bucket As-Excavation; (Excavation) | 1 |
| 4I***70 | Adjuster Group-Bucket; -G/U/V/Tb-Family | 1 |
6i-5043 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 6I***43 | Bucket & Adjuster Group | 1 |
| 7Y***50 | Bucket As-Excavation; (Excavation) | 1 |
209-8780 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 20***80 | Bucket & Adjuster Group | 1 |
| 20***82 | Bucket As-Heavy Duty | 1 |
206-0394 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 20***94 | Bucket & Adjuster Group | 1 |
| 20***22 | Bucket As-Heavy Duty | 1 |
219-9030 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 21***36 | Bucket As-Heavy Duty Rock | 1 |
| 21***30 | Bucket & Adjuster Group | 1 |
206-0391 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 20***91 | Bucket & Adjuster Group | 1 |
| 20***19 | Bucket As-Heavy Duty | 1 |
219-9027 Bucket & Adjuster Gp
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 21***33 | Bucket As-Heavy Duty Rock | 1 |
| 21***27 | Bucket & Adjuster Group | 1 |
209-8816 Bucket Ar
| 19***20 | Sidecutter Group | 1 |
| 20***95 | Bucket & Adjuster Group | 1 |
| 20***16 | Bucket Ar | 1 |
134-5510 Bucket Ar
| 10***83 | Protector Group-Sidebar | 1 |
| 13***10 | Bucket Ar | 1 |
| 13***14 | Bucket & Adjuster Group | 1 |
134-5509 Bucket Ar
| 10***83 | Protector Group-Sidebar | 1 |
| 13***09 | Bucket Ar | 1 |
| 13***13 | Bucket & Adjuster Group | 1 |
138-9669 Bucket Ar
| 10***69 | Retainer As-G.E.T. | 4 |
| 11***93 | Protector Group-Side Bar | 1 |
| 11***68 | Pin-G.E.T. | 4 |
209-8815 Bucket Ar
| 19***20 | Sidecutter Group | 1 |
| 20***94 | Bucket & Adjuster Group | 1 |
| 20***15 | Bucket Ar | 1 |
123-4096 Bucket Ar
| 12***96 | Bucket Ar | 1 |
| 12***84 | Bucket & Adjuster Group | 1 |
| 6Y***58 | Pin-G.E.T.; Pin G.E.T. | 4 |
134-5511 Bucket Ar
| 10***69 | Retainer As-G.E.T. | 4 |
| 11***93 | Protector Group-Side Bar | 1 |
| 11***68 | Pin-G.E.T. | 4 |
209-8810 Bucket Ar
| 19***20 | Sidecutter Group | 1 |
| 20***90 | Bucket & Adjuster Group | 1 |
| 20***10 | Bucket Ar | 1 |
209-8809 Bucket Ar
| 19***20 | Sidecutter Group | 1 |
| 20***80 | Bucket & Adjuster Group | 1 |
| 20***09 | Bucket Ar | 1 |
138-9668 Bucket Ar
| 10***69 | Retainer As-G.E.T. | 4 |
| 11***93 | Protector Group-Side Bar | 1 |
| 11***68 | Pin-G.E.T. | 4 |
209-8808 Bucket Ar
| 19***20 | Sidecutter Group | 1 |
| 20***89 | Bucket & Adjuster Group | 1 |
| 20***08 | Bucket Ar | 1 |
209-8811 Bucket Ar
| 19***20 | Sidecutter Group | 1 |
| 20***91 | Bucket & Adjuster Group | 1 |
| 20***11 | Bucket Ar | 1 |
163-6027 Bucket Ar-Heavy Duty Rock
| 16***27 | Bucket Ar-Heavy Duty Rock, Tee; Socket El 8-L/Omd, Tee; Socket El 8-L/Omd, Tee | 1 |
| 16***31 | Bucket & Adjuster Group | 1 |
| 16***11 | Protector Group-Side Bar; -Bucket | 2 |
138-4715 Bucket As-Excavation
| 13***92 | Plate-Wear | 1 |
| 13***93 | Plate-Wear | 4 |
| 13***95 | Edge As | 1 |
4i-4100 Bucket As-Excavation
| 10***86 | Edge As | 1 |
| 11***11 | Plate | 1 |
| 4I***00 | Bucket As-Excavation; (Excavation) | 1 |
136-6249 Bucket As-Excavation
| 12***19 | Plate | 4 |
| 13***49 | Bucket As-Excavation | 1 |
| 13***79 | Plate-Wear | 1 |
138-7540 Bucket As-Excavation
| 12***13 | Plate-Wear | 2 |
| 13***31 | Plate-Wear | 5 |
| 13***32 | Plate-Wear | 2 |
138-4716 Bucket As-Excavation
| 13***16 | Bucket As-Excavation | 1 |
| 13***26 | Plate-Wear | 1 |
| 13***27 | Plate-Wear | 4 |
7y-9150 Bucket As-Excavation
| 10***42 | Plate | 3 |
| 10***43 | Plate | 2 |
| 10***37 | Plate | 2 |
136-6247 Bucket As-Excavation
| 12***49 | Plate | 4 |
| 13***47 | Bucket As-Excavation | 1 |
| 13***69 | Plate-Wear | 1 |
138-7539 Bucket As-Excavation
| 12***38 | Plate-Wear | 2 |
| 13***23 | Plate | 5 |
| 13***24 | Plate | 2 |
136-6248 Bucket As-Excavation
| 12***53 | Plate | 4 |
| 13***48 | Bucket As-Excavation | 1 |
| 13***74 | Plate-Wear | 1 |
105-6215 Bucket As-Excavation
| 10***15 | Bucket As-Excavation | 1 |
| 10***18 | Plate | 2 |
| 10***19 | Plate | 2 |
113-2109 Bucket As-Excavation
| 10***18 | Plate | 2 |
| 10***19 | Plate | 2 |
| 10***69 | Adapter-Strap | 3 |
136-6253 Bucket As-Excavation
| 12***88 | Plate-Wear | 4 |
| 13***53 | Bucket As-Excavation | 1 |
| 13***99 | Plate-Wear | 1 |
136-6250 Bucket As-Excavation
| 12***53 | Plate | 4 |
| 13***50 | Bucket As-Excavation | 1 |
| 13***84 | Plate-Wear | 1 |
136-6251 Bucket As-Excavation
| 12***65 | Plate-Wear | 4 |
| 13***51 | Bucket As-Excavation | 1 |
| 13***89 | Plate-Wear | 1 |
134-5518 Bucket As-Excavation
| 12***18 | Plate-Wear | 2 |
| 13***34 | Plate-Wear | 5 |
| 13***35 | Plate-Wear | 3 |
136-6252 Bucket As-Excavation
| 12***78 | Plate-Wear | 4 |
| 13***52 | Bucket As-Excavation | 1 |
| 13***94 | Plate-Wear | 1 |
145-8076 Bucket As-General Purpose
| 14***76 | Bucket As-General Purpose | 1 |
| 14***99 | Plate | 1 |
| 14***00 | Plate | 4 |
145-8072 Bucket As-General Purpose
| 13***54 | Plate As | 1 |
| 13***05 | Edge As | 1 |
| 14***72 | Bucket As-General Purpose | 1 |
145-8075 Bucket As-General Purpose
| 13***59 | Plate As | 1 |
| 13***08 | Edge As | 1 |
| 14***75 | Bucket As-General Purpose | 1 |
145-8073 Bucket As-General Purpose
| 13***06 | Edge As | 1 |
| 14***73 | Bucket As-General Purpose | 1 |
| 14***88 | Plate | 1 |
146-0223 Bucket As-General Purpose
| 14***23 | Bucket As-General Purpose | 1 |
| 14***31 | Plate | 1 |
| 14***32 | Plate | 4 |
145-8074 Bucket As-General Purpose
| 13***07 | Edge As | 1 |
| 14***74 | Bucket As-General Purpose | 1 |
| 14***26 | Eye-Lift | 1 |
149-7550 Bucket As-General Purpose
| 13***92 | Plate-Wear | 1 |
| 13***93 | Plate-Wear | 4 |
| 13***95 | Edge As | 1 |
134-5517 Bucket As-General Purpose
| 12***01 | Edge As | 1 |
| 13***17 | Bucket As-General Purpose | 1 |
| 13***27 | Plate-Wear | 1 |
145-8077 Bucket As-General Purpose
| 14***77 | Bucket As-General Purpose | 1 |
| 14***09 | Edge As | 1 |
| 14***26 | Eye-Lift | 1 |
134-5516 Bucket As-General Purpose
| 10***22 | Edge As | 1 |
| 13***16 | Bucket As-General Purpose | 1 |
| 13***24 | Plate-Wear | 1 |
219-8932 Bucket As-General Purpose
| 19***95 | Adapter-Tip; (Rh)(Rh) | 1 |
| 19***96 | Adapter-Tip; (Lh)(Lh) | 1 |
| 19***28 | Edge As | 1 |
206-0419 Bucket As-Heavy Duty
| 15***64 | Adapter-Tip; -G.E.T. | 5 |
| 20***19 | Bucket As-Heavy Duty | 1 |
| 20***26 | Edge As | 1 |
208-0103 Bucket As-Heavy Duty
| 15***64 | Adapter-Tip; -G.E.T. | 8 |
| 20***63 | Edge As | 1 |
| 20***65 | Plate-Wear | 1 |
209-8782 Bucket As-Heavy Duty
| 20***24 | Edge As-Cutting | 1 |
| 20***55 | Plate-Wear | 6 |
| 20***59 | Plate-Wear | 1 |
206-0423 Bucket As-Heavy Duty
| 20***23 | Bucket As-Heavy Duty | 1 |
| 20***30 | Edge As | 1 |
| 20***56 | Plate-Wear | 1 |
206-0418 Bucket As-Heavy Duty
| 20***18 | Bucket As-Heavy Duty | 1 |
| 20***25 | Edge As | 1 |
| 20***53 | Plate-Wear | 1 |
206-0422 Bucket As-Heavy Duty
| 15***64 | Adapter-Tip; -G.E.T. | 7 |
| 20***22 | Bucket As-Heavy Duty | 1 |
| 20***29 | Edge As | 1 |
219-8934 Bucket As-Heavy Duty Rock
| 19***95 | Adapter-Tip; (Rh)(Rh) | 1 |
| 19***96 | Adapter-Tip; (Lh)(Lh) | 1 |
| 19***30 | Edge As | 1 |
143-5413 Bucket As-Heavy Duty Rock
| 13***95 | Edge As | 1 |
| 14***13 | Bucket As-Heavy Duty Rock | 1 |
| 14***21 | Plate (Wear) | 1 |
219-8936 Bucket As-Heavy Duty Rock
| 19***95 | Adapter-Tip; (Rh)(Rh) | 1 |
| 19***96 | Adapter-Tip; (Lh)(Lh) | 1 |
| 20***56 | Plate-Wear | 1 |
206-0417 Bucket As-Heavy Duty Rock
| 20***17 | Bucket As-Heavy Duty Rock | 1 |
| 20***24 | Edge As-Cutting | 1 |
| 20***55 | Plate-Wear | 6 |
219-8930 Bucket As-Heavy Duty Rock
| 19***95 | Adapter-Tip; (Rh)(Rh) | 1 |
| 19***96 | Adapter-Tip; (Lh)(Lh) | 1 |
| 19***65 | Edge As | 1 |
163-6036 Bucket As-Heavy Duty Rock
| 13***10 | Edge As | 1 |
| 14***96 | Eye-Lift | 1 |
| 15***64 | Adapter-Tip; -G.E.T. | 4 |
142-4290 Bucket As-Heavy Duty Rock
| 10***23 | Plate As | 1 |
| 10***27 | Plate As | 1 |
| 10***54 | Adapter-Tip; (J-550, 2-Strap, Center) | 1 |
219-8935 Bucket As-Heavy Duty Rock
| 19***95 | Adapter-Tip; (Rh)(Rh) | 1 |
| 19***96 | Adapter-Tip; (Lh)(Lh) | 1 |
| 20***55 | Plate-Wear | 1 |
219-8933 Bucket As-Heavy Duty Rock
| 19***95 | Adapter-Tip; (Rh)(Rh) | 1 |
| 19***96 | Adapter-Tip; (Lh)(Lh) | 1 |
| 19***29 | Edge As | 1 |
219-8937 Bucket As-Heavy Duty Rock
| 19***95 | Adapter-Tip; (Rh)(Rh) | 1 |
| 19***96 | Adapter-Tip; (Lh)(Lh) | 1 |
| 20***65 | Plate-Wear | 1 |
163-6035 Bucket As-Heavy Duty Rock
| 13***09 | Edge As | 1 |
| 14***96 | Eye-Lift | 1 |
| 15***64 | Adapter-Tip; -G.E.T. | 4 |
219-8931 Bucket As-Heavy Duty Rock
| 19***95 | Adapter-Tip; (Rh)(Rh) | 1 |
| 19***96 | Adapter-Tip; (Lh)(Lh) | 1 |
| 20***53 | Plate-Wear | 1 |
216-4330 Bucket As-Heavy Duty Rock
| 19***95 | Adapter-Tip; (Rh)(Rh) | 1 |
| 19***96 | Adapter-Tip; (Lh)(Lh) | 1 |
| 21***30 | Bucket As-Heavy Duty Rock | 1 |
4i-4071 Bucket As-Mass Excavator
| 10***44 | Plate | 2 |
| 10***90 | Edge As | 1 |
| 4I***71 | Bucket As-Mass Excavator | 1 |
109-1127 Bucket As-Rock
| 10***10 | Plate | 3 |
| 10***16 | Edge As | 1 |
| 10***25 | Plate-Wear | 2 |
105-3614 Bucket As-Trenching
| 10***06 | Plate | 2 |
| 10***14 | Bucket As-Trenching | 1 |
| 10***20 | Plate | 2 |
123-4097 Bucket As-Trenching
| 10***53 | Plate As | 1 |
| 10***02 | Plate As; (Rh) | 1 |
| 10***03 | Plate As; (Lh) | 1 |
105-3597 Bucket As-Trenching
| 10***97 | Bucket As-Trenching | 1 |
| 10***08 | Plate | 1 |
| 10***09 | Plate | 2 |
105-3583 Bucket As-Trenching
| 10***64 | Plate | 2 |
| 10***83 | Bucket As-Trenching | 1 |
| 10***89 | Plate | 3 |
105-3572 Bucket As-Trenching
| 10***64 | Plate | 2 |
| 10***72 | Bucket As-Trenching | 1 |
| 10***78 | Plate | 3 |
122-9461 Bucket As-Trenching
| 12***30 | Plate | 1 |
| 12***31 | Plate | 3 |
| 12***92 | Plate | 1 |
105-3552 Bucket As-Trenching
| 10***52 | Bucket As-Trenching | 1 |
| 10***64 | Plate | 2 |
| 10***67 | Plate | 3 |
208-5321 Corner
| 20***21 | Corner | 1 |
208-5320 Corner
| 20***20 | Corner | 1 |
126-5010 Mounting Gp-Hammer
| 08***60 | Adjuster Group-Bucket; -E, F-Family | 1 |
| 12***09 | Bracket As | 1 |
| 12***10 | Mounting Group-Hammer | 1 |
166-3511 Protector Gp-Side Bar
| 13***98 | Pin-G.E.T. | 4 |
| 13***99 | Retainer As-G.E.T. | 4 |
| 16***77 | Protector-Side Bar | 2 |
112-2493 Protector Gp-Side Bar
| 11***93 | Protector Group-Side Bar | 1 |
| 11***94 | Protector-Side Bar | 2 |
| 13***98 | Pin-G.E.T. | 4 |
101-3083 Protector Gp-Side Bar
| 10***83 | Protector Group-Sidebar | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 4 |
| 13***38 | Pin-G.E.T. | 4 |
7y-0919 Sidecutter Gp
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 10 |
| 3K***34 | Washer 6.35 mm(.250 In.) Thick; Washer-- Rear Support To Frame | 10 |
| 7Y***19 | Sidecutter Group | 1 |
195-7120 Sidecutter Gp
| 19***36 | Sidecutter; (Upper) | 2 |
| 19***20 | Sidecutter Group | 1 |
| 1D***37 | Bolt-Generator To Support Assembly | 12 |
112-2480 Sidecutter Gp
| 11***80 | Sidecutter Group | 1 |
| 11***85 | Sidecutter-Rh | 1 |
| 11***86 | Sidecutter-Lh | 1 |
7y-2148 Sidecutter Gp -E & F Family
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 10 |
| 3K***34 | Washer 6.35 mm(.250 In.) Thick; Washer-- Rear Support To Frame | 10 |
| 7Y***46 | Bolt (70mm Long) | 10 |
9w-6476 Tip Gp
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 9W***76 | Tip Group; -J-550 | 1 |
9n-4566 Tip Gp-Penetration
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 7T***59 | Tip-Penetration | 1 |
9w-6477 Tip Gp -2 Required
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 6I***58 | Tip-Penetration | 1 |
3g-3352 Tip Gp-Penetration
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 3G***52 | Tip Group; -J-550, Heavy-Duty | 1 |
9n-4565 Tip Gp-Penetration
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 6I***58 | Tip-Penetration | 1 |
8e-3758 Tip Gp-Abrasion
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 8E***58 | Tip Group-Abrasion; -J-460, Heavy-Duty | 1 |
8e-3759 Tip Gp-Abrasion
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 6Y***53 | Tip-Abrasion | 1 |
6y-5373 Tip Gp-Long
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 6Y***73 | Tip Group-Long; -J-550, Heavy-Duty | 1 |
8j-9842 Tip Gp-Long
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 8J***42 | Tip Group-Long; -J-550, Heavy-Duty | 1 |
9n-4563 Tip Gp-Long
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 9N***52 | Tip-Long; Tip-Abrasion | 1 |
9n-4562 Tip Gp-Long
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 9N***62 | Tip Group-Long; -J-460 | 1 |
198-8474 Tip Gp-Long
| 19***74 | Tip Group-Long; -J-450, Heavy-Duty | 1 |
| 9N***63 | Tip Group-Long; -J-450, Heavy-Duty | 1 |
9n-4564 Tip Gp-Penetration
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 9N***64 | Tip Group-Penetration; -J-450 | 1 |
9n-4561 Tip Gp-Short
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 9N***61 | Tip Group-Short; -J-450 | 1 |
8j-9841 Tip Gp-Short
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 8J***41 | Tip Group-Short; -J-550 | 1 |
135-9318 Tip Gp-Twin Sharp
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 13***18 | Tip Group-Twin Sharp | 1 |
135-9319 Tip Gp-Twin Sharp
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 13***19 | Tip Group-Twin Sharp | 1 |
9n-4560 Tip Gp-Wide
| 10***50 | Tip-Wide | 1 |
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
9n-4552 Tip-Long
| 9N***52 | Tip-Long | 1 |
116-7459 Tip-Penetration
| 11***59 | Tip-Penetration | 1 |
113-0559 Tip-Penetration
| 11***59 | Tip-Penetration | 1 |
350 serial number reference
On the Cat 350 excavator the PIN/serial plate sits on the right side of the cab exterior, just below the window; machines built before 1995 may carry a duplicate plate inside the cab near the operator's seat or right foot area. Read the first three characters of the serial as the prefix, which identifies the model and build series; the following digits are the individual unit's sequence number.
| Prefix | Identifies | Notes |
|---|---|---|
| 2ZL | 350, standard undercarriage | Covered together with 350 L in the same factory parts and electrical documentation family. Cat 3306 turbocharged, air-to-air aftercooled diesel, around 213 kW (286 hp). |
| 3ML | 350, standard undercarriage | Same engine platform and documentation family as 2ZL. |
| 7RK | 350, standard undercarriage | Factory electrical-schematic documentation pairs this prefix (350 standard) with 9DK (350 L) as a joint coverage range. |
| 8HK | 350, standard undercarriage | Same engine platform and documentation family as 2ZL, 3ML and 7RK. |
| 8KZ | 350 L, long undercarriage | Long-undercarriage variant. Same Cat 3306 ATAAC engine as the standard 350, with a heavier operating weight from the extended undercarriage. |
| 9DK | 350 L, long undercarriage | Long-undercarriage variant, 3306 ATAAC engine. Well covered in factory service and electrical documentation, paired there with standard-undercarriage prefix 7RK. |
| 9FL | 350 L, long undercarriage | Long-undercarriage variant, 3306 ATAAC engine, same generation as 8KZ and 9DK. Period spec sheets for this generation cite roughly a 1994-1998 build-year window; confirm the exact model year for your serial with your dealer. |
Frequently asked questions
What engine powers the Caterpillar 350 excavator?
The classic Cat 350/350L runs the Caterpillar 3306 ATAAC, a turbocharged, air-to-air aftercooled 10.5 L inline-six diesel rated around 213 kW (286 hp). It uses mechanical fuel injection and mechanical governing; there is no factory electronic control module or diagnostic code system, only the analog Caterpillar Monitoring System gauge and warning-lamp cluster.
How much does a Caterpillar 350 excavator weigh?
Operating weight runs roughly 48-49 tonnes (about 106,000-108,000 lb), varying with undercarriage length, boom and stick combination, and counterweight fitted. The long-undercarriage 350 L generally sits at the heavier end of that range compared with the standard 350.
What replaced the Caterpillar 350 excavator?
Caterpillar retired the classic 350/350L platform in 1998 and moved large-excavator customers onto the 345B, which carried forward the same F-linkage front-end sizing used on the 350. Caterpillar reused the "350" name again in 2022 for an unrelated Next Generation excavator built around the electronic C9.3B engine, a different machine with no parts or design connection to this one.
What 350 owners discuss
What is the reputation of the 3306 ATAAC engine in the classic 350/350L, and what quirks should owners expect?
The 3306 ATAAC in this platform has a reputation as tough and straightforward to maintain, but owners report a few recurring quirks. After sitting idle for several days it can crank 30 seconds or longer before it fires - treated as normal on this engine rather than a fault. Air-to-air aftercooler cores are known to crack at the end tanks over time, bleeding off boost and showing up as a flat, sluggish engine under load. Coolant quality matters: low-quality or off-spec coolant leaves mineral deposits that clog cooling passages and accelerate overheating. Turbo bearing wear shows up as unusual whine or vibration and is worth listening for at every service interval.
What hydraulic behavior is typical for this era of 350/350L, and what should you watch for?
This era's load-sensing hydraulic system is well regarded for control but described by long-time operators as delicate compared to later platforms. It runs a separate swing pump and a lower standard operating pressure than the newer 345 - roughly 313 bar (4550 psi) versus 341 bar (4950 psi) - trading some breakout force for smoother metering. When a single function, commonly the boom, goes weak or stops responding while fluid level and every other function is normal, the load-sensing valve or a worn section of the main pump is the first place to look, not the whole hydraulic system. Because pump and valve work is a major job on this platform, have your dealer verify before condemning a pump.
What undercarriage and final drive wear patterns show up on machines this age?
Undercarriage wear tracks with hours and ground conditions like any machine this age, but the more specific complaint on this platform is final drive seal failure - a leak at the joint between the sprocket and the final drive housing usually means the floating face seal has failed. Packed debris from muddy or rocky work is the most common root cause: dirt wedges between the seal faces, pushes them out of position, and scores them, letting gear oil escape. Cleaning the undercarriage off at the end of each shift and inspecting the final drives on a set interval catches this before it turns into a housing rebuild.
What swing system issues are commonly reported on this platform?
Grinding or popping noise on swing usually means the bearing needs grease or the raceway has started to wear; noticeable play in the upper structure means the raceway is already worn past the point lubrication will fix. A known failure specific to this platform is a collapsed bearing inside one of the swing drive's planetary gears - checking the slew hub oil for metal particles catches it early. A swing that feels weak or hesitant under load but isn't noisy usually points to internal wear in the swing motor itself rather than the bearing. Because a worn bearing or brake affects how the upper structure holds position, have your dealer verify swing bearing and brake condition before returning the machine to full duty.
What electrical or sensor issues are common on a machine this age?
Machines this age more often show electrical trouble as chafed wiring than a genuinely bad sensor - the harness running up the boom is the usual suspect, worn through at bend points and pinch spots from years of cycling. Because a shared low-voltage sensor supply feeds several sensors at once, a single broken wire or bad ground in that harness can set multiple unrelated fault codes at the same time, which throws off diagnosis if codes are chased one at a time instead of checking the harness first. Machines that have worked in wet, muddy, or coastal conditions also collect corrosion inside connectors, causing intermittent faults that come and go with vibration or weather.
What should you check when buying a used classic 350/350L?
Run the machine at least half an hour to get everything warm, then walk it down looking for leaks - the center hydraulic swivel is worth extra attention since a leak there is one of the more expensive repairs on this class of machine. Check pins and bushings for slop in the boom, stick, and bucket linkage, and look over the boom and undercarriage for welding or patch repair, which points to hard prior use. Hose age, cylinder rod condition (scoring, rust, pitting), and whatever maintenance records are available round out a basic inspection. A machine that starts easily, runs smooth, holds tight with little play, and shows no active leaks is a reasonable used buy on this platform.
How does the classic 350/350L compare to its contemporaries, and is it still a good buy?
Operator opinion on the classic 350/350L is mixed but consistent: it is viewed as strong and rugged rather than fast, noticeably slower cycling than the 345 and than comparable Hitachi, Komatsu, or Volvo machines in its class. In rock work that slower pace is sometimes seen as an advantage, since more speed just tears equipment up faster. It handles a large bucket without complaint. Because some buyers pass it over for the speed difference, good used examples can be found at a lower price than the capability suggests. A quick coupler makes sense for pipeline or utility work with frequent bucket changes, but for bulk digging operators skip couplers since they cost a noticeable amount of breakout force.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 350 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.