Caterpillarexcavator
Caterpillar 320D RR
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 320D RR (also catalogued as the 320D LRR on the long-undercarriage build) is a reduced-tail-swing crawler excavator in the 20-25 tonne class, built on the Cat 320D platform and sold primarily through the Tata Caterpillar dealer network in India, alongside other international markets. Two engine generations cover the production run, split by serial prefix: early machines (EBY, FXK, GKL) carry the Cat 3066TA turbocharged diesel rated near 103 kW (138-140 hp); later machines (GMX, HJC) carry the Cat C6.4 ACERT engine, rated 103-110 kW (140-148 hp) net depending on whether the unit is EU Stage IIIA or North America Tier 3 calibrated. Operating weight runs about 20,300 kg (44,750 lb) on the standard undercarriage up to 21,500-25,000 kg (47,400-55,100 lb) on the long-undercarriage build, depending on counterweight and track shoe fitted. The line succeeded the Cat 320C LU utility excavator and was itself replaced by the Cat 320E LRR. Cat offered both standard and long-undercarriage chassis, multiple stick lengths, and an optional heavy-lift hydraulic circuit.
The defining change across the run is the engine swap partway through D-series production, moving from the mechanically governed, HEUI-injected 3066TA to the electronically controlled, common-rail C6.4 ACERT as emissions rules tightened. The two share no fuel-system hardware or diagnostic approach, so identifying which engine a given unit carries by serial prefix matters before ordering parts or booking diagnostic work. What sets the RR apart from a standard 320D L is its 2.0 m (6 ft 7 in) tail-swing radius against 2.75 m (9 ft), held inside the track width by added counterweight rather than a shorter boom, which is why the configuration became a fixture on demolition sites, road-widening jobs, and confined urban lots. Decades into its service life, the 320D RR remains common in used and rental fleets across markets that ran the Tata-badged units hard in infrastructure work, keeping steady demand for undercarriage, swing-circle, and engine parts across both generations.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 320D RR specifications
Engine
| Engine model | Two engine generations were used across this line, tied to specific serial-number blocks. Early-production units carry the Cat 3066TA, a turbocharged inline 6-cylinder diesel. Later-production units carry the Cat C6.4 ACERT, an inline 6-cylinder turbocharged diesel with ACERT emissions technology. Confirm which engine is fitted from the machine own serial number before ordering fuel-system parts, since the two do not share fuel-system components. |
| Net power | Cat 3066TA (early production): about 103 kW (138 to 140 hp) net. Cat C6.4 ACERT (later production): 110 kW (148 hp) net at 1800 rpm on North America Tier 3-rated units, or 103 kW (140 hp) net at 1800 rpm on EU Stage IIIA-rated units. Rating varies by engine generation and market. |
| Displacement, bore x stroke | 6.4 L (389 cu in); bore 102 mm (4.0 in), stroke 130 mm (5.1 in). This basic architecture is shared across both engine generations fitted to this line. |
| Emissions certification | Early 3066TA units use electronic engine control but predate ACERT-level emissions certification. Later C6.4 ACERT units meet US EPA Tier 3 on North America-rated units or EU Stage IIIA on international-rated units, depending on the power rating fitted. |
Weights
| Operating weight, standard undercarriage (RR) | 20,300 kg (44,750 lb) base configuration |
| Operating weight, long undercarriage (L RR) | 21,500 to 25,000 kg (47,400 to 55,100 lb), varies with counterweight, shoe width and stick length fitted |
| Ground pressure | 46 kPa (0.46 bar, 6.7 psi) with 600 mm (24 in) shoes on the standard undercarriage; 36 kPa (0.36 bar, 5.2 psi) with 800 mm (31 in) shoes on the long undercarriage |
Dimensions
| Transport length | 8.77 to 8.96 m (28 ft 9 in to 29 ft 5 in), varies by stick and counterweight option |
| Transport width | 2.98 to 3.18 m (9 ft 9 in to 10 ft 5 in), varies by track shoe width |
| Transport height | 3.44 to 3.74 m (11 ft 3 in to 12 ft 3 in), varies by boom stow position and counterweight |
| Tail swing radius | 2.0 m (6 ft 7 in). This reduced tail swing versus the 2.75 m (9 ft) radius of the standard-swing 320D L is the defining feature of this RR configuration |
| Track shoe width | 600 mm (24 in) standard on the short/standard-undercarriage RR; 700 or 800 mm (28 or 31 in) standard or optional on the long-undercarriage L RR |
| Ground clearance | 0.45 m (1 ft 6 in) |
| Undercarriage length | Ground-contact track length about 3.65 m (12 ft); overall undercarriage length about 4.46 m (14 ft 8 in); track gauge 2.38 m (7 ft 10 in) |
Performance
| Max digging depth | 6.69 to 7.66 m (21 ft 11 in to 25 ft 2 in), varies by market rating and stick configuration |
| Max reach at ground level | 9.83 to 10.76 m (32 ft 3 in to 35 ft 4 in), varies by market rating and stick configuration |
| Max dump/loading height | 6.52 to 6.94 m (21 ft 5 in to 22 ft 9 in) |
| Max cutting height | 9.52 to 9.94 m (31 ft 3 in to 32 ft 7 in) |
| Swing speed | 11.5 rpm |
| Swing torque | 61.8 to 62.0 kN·m (45,600 lbf·ft) |
| Travel speed | 5.5 to 5.7 km/h (3.4 to 3.5 mph), single-range travel |
| Gradeability | 35 degrees (about 70% grade) |
| Drawbar pull | 206 kN (46,311 lbf) |
Forces
| Bucket digging force | 141 kN (31,700 lbf) per factory spec sheet figures for this reduced-radius configuration |
| Stick/arm digging force | 106 kN (23,800 lbf). Factory literature notes stick and bucket forces on this reduced-radius line run about 7% higher than the prior 320C LU |
| Implement hydraulic system pressure | 35,000 kPa (5,076 psi) standard equipment circuit, up to 36,000 kPa (5,221 psi) in heavy-lift mode; swing circuit 25,000 kPa (3,626 psi) |
Service capacities (summary)
| Fuel tank | 291 L (77 US gal) on this reduced-radius configuration. The standard-swing 320D / 320D L carries a larger tank, about 410 L (108 US gal) - varies by configuration/series. |
| Hydraulic system | 212 L (56 US gal) total on this reduced-radius configuration. The standard-swing 320D / 320D L totals about 260 L (69 US gal), including a 120 L (32 US gal) tank - varies by configuration/series. |
| Engine oil | 30 L (8 US gal) |
| Cooling system | 25 L (6.6 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
320D RR fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 30 L (8 US gal) | Cat DEO / DEO-ULS diesel engine oil (API CJ-4 / Cat ECF-3 level). SAE 10W-30 for -18 to 40 deg C ambient; SAE 15W-40 for warmer/tropical climates; SAE 0W-40 or 5W-40 multigrade for cold-climate starts below -20 deg C. |
| Cooling system | 25 L (6.6 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 glycol/water, extended-life organic-acid formula. Cat DEAC conventional coolant with supplemental additive is the second-choice option. |
| Fuel tank | 290 L (77 US gal) on the RR reduced-radius configuration. The standard 320D / 320D L carries a larger tank, about 409 L (108 US gal) - varies by configuration/series. | Ultra-low sulfur No. 2-D diesel meeting Cat's fuel spec; No. 1-D or a winter blend recommended below -7 deg C. |
| Hydraulic system total | about 211-212 L (56 US gal) including the tank, on the RR configuration. Standard 320D / 320D L totals about 261 L (69 US gal) - varies by configuration/series. | Cat HYDO Advanced 10 (SAE 10W) preferred; Cat HYDO Advanced 20 or 30 in hot climates. Second-choice oils: Cat TDTO, Cat DEO, Cat MTO. Cat BIO HYDO Advanced where a biodegradable fluid is required. |
| Hydraulic tank | about 155 L (41 US gal), including the suction pipe, on the RR configuration. Standard 320D / 320D L tank holds about 121 L (32 US gal) - varies by configuration/series. | Same fluid as hydraulic system total: Cat HYDO Advanced 10 (SAE 10W) preferred, second-choice Cat TDTO / DEO / MTO. |
| Final drive (each) | 8.0 L (2.1 US gal) per side. A few spec sheets list up to 10 L (2.6 US gal) each - varies by source/series; confirm against the machine's own OMM. | Cat TDTO, SAE 30 as standard fill; Cat TDTO-TMS or Cat Cold Weather TDTO for sub-zero climates. |
| Swing drive | 8.0 L (2.1 US gal) | Cat TDTO, SAE 30 as standard fill; Cat TDTO-TMS or Cat Cold Weather TDTO for sub-zero climates. |
| Pilot/other circuits | Not published as a separate refill volume; pilot and control circuits draw from the main hydraulic tank and are included in the hydraulic system total above. | Same fluid as hydraulic system: Cat HYDO Advanced 10 (SAE 10W). |
| Grease (spec only) | No refill volume; serviced per grease-fitting interval, not a fill quantity. | Cat Advanced 3Moly Grease, NLGI 2, lithium-complex base with 3% molybdenum disulfide, rated -20 to 40 deg C - standard factory fill for pin and bushing points. Cat Extreme Application Grease (NLGI 1 or 2) as the extended-interval/high-temperature alternative. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 320D RR maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the 320D RR beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull S.O.S engine oil samples at 250 hours and hydraulic/swing-drive samples at 500 hours; trend results rather than reading one report in isolation. If hydraulics feel sharp cold and go sluggish after 15-20 minutes, check oil condition, level, and cooler cleanliness before condemning the main pump - it is the most reported wear pattern on this model. Read stored fault codes on the monitor before teardown: nuisance derates usually trace to a hydraulic pressure sensor or ECM harness connection, not a mechanical failure, on both engine generations fitted to this line.
Corrective & Common Repairs
Confirm which engine is fitted before ordering parts: filters, injectors, and diagnostic cabling do not interchange between the early 3066TA and later C6.4 ACERT. On 3066TA units, injector seal leakage at the injector holder is the recurring complaint, usually dried O-rings or fuel contamination. On C6.4 ACERT units, watch for crank-no-start faults traced to fuel rail pressure, a loose crank-speed sensor, or a bad flywheel timing-sensor connection. Uncommanded swing creep near walls or personnel signals a worn swing brake or motor leakage - treat as a safety repair, not wear.
Overhaul & Rebuild Points
Heat-soak slowdown that survives a cooler clean and fresh oil points to a tired main pump or sticking control-valve spool - budget for a rebuild, not another fluid change. Swing creep under load calls for rebuilding the motor and brake together. Replace undercarriage sprockets, chain, and idlers in matched sets; the reduced-radius counterweight loads the drive train harder than a standard-swing 320D. Top-end rebuild scope differs by generation: HEUI pump and injectors on 3066TA units, common-rail injectors and high-pressure pump on C6.4 ACERT units.
Seasonal & Environment Servicing
Cold starts depend on which engine is fitted: verify glow-plug/ether-start operation and battery condition on 3066TA units, and check both engine speed sensors near the injection pump and flywheel on C6.4 ACERT units before assuming a fuel fault. Switch to cold-climate engine and hydraulic oil grades as temperatures drop. Fuel filtration discipline matters more on 3066TA units, where injector seal leakage often traces to contaminated fuel. This RR configuration works closer to walls and personnel than a standard-swing 320D, so rinse debris from the swing bearing and undercarriage more often on demolition and urban sites.
320D RR common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 117-4089 | Element-Water Separator | Fuel system service | Check fitment → |
| 131-8821 | Filter Element As-Air | Air intake service | Check fitment → |
| 131-8822 | Filter Element As-Air | Air intake service | Check fitment → |
| 093-7521 | Filter-Oil | Hydraulic service | Check fitment → |
| 216-6676 | Filter Element As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
320D RR fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| MID 036 CID 0100 FMI 03/04 | Engine oil pressure sensor circuit fault - voltage above normal (FMI 03) or below normal (FMI 04); ECM cannot get a valid oil pressure reading | Corroded or damaged sensor connector, open or shorted sensor wiring, failed oil pressure sensor | Inspect the sensor connector for corrosion/damage, check wiring for opens/shorts to ground or power, test sensor per service manual and replace if wiring checks good |
| MID 036 CID 0110 FMI 03/04 | Engine coolant temperature sensor circuit fault - voltage above or below normal; ECM loses a trustworthy coolant temperature signal, affecting fan control, fuel timing, and cold-start logic | Corroded or damaged sensor connector, open or shorted circuit, failed sensor | Inspect connector and harness, check sensor resistance against the temperature/resistance chart, replace sensor if out of spec |
| MID 036 CID 0190 FMI 08 | Engine speed/timing sensor signal is abnormal - incorrect frequency, pulse width, or period | Damaged sensor tip, incorrect sensor air gap, debris on the timing wheel, damaged or poorly shielded wiring | Check sensor gap and mounting, inspect wiring and shielding for damage, clean or replace the speed/timing sensor |
| MID 039 CID 0096 FMI 05 | Fuel level sensor circuit fault on the machine/pump controller - signal current below normal | Open circuit in sender wiring, failed fuel level sender, poor connector contact | Jumper-test the sender connector per the troubleshooting procedure, inspect harness for open circuits, replace the sender if confirmed faulty |
| MID 039 CID 0041 FMI 06 | 8V sensor supply circuit fault on the machine/pump controller - current above normal, indicating a short on the shared sensor supply rail | A shorted sensor or harness segment on the 8V supply circuit feeding several machine sensors | Disconnect sensors fed by the 8V supply one at a time to isolate the short, then repair or replace the shorted component or wiring |
| MID 036 CID 0168 FMI 03/04 | Electrical system (battery/charging) voltage above or below normal | Failed alternator or regulator, loose or corroded battery/charging connections, weak or failed battery | Measure charging voltage at the battery with the engine running, inspect alternator output and drive belt, check ground straps and battery connections |
| CID 0600/0735 FMI 03/04 | Hydraulic oil temperature sensor circuit fault - voltage above or below normal | Damaged sensor connector, open or shorted wiring, failed hydraulic oil temperature sensor | Inspect connector and wiring, check sensor resistance against the temperature chart, replace sensor if faulty |
| CID 1267 (Low Coolant Level) | Coolant level in the recovery/sight tank has dropped below normal, triggering the low-coolant warning lamp | Actual coolant loss from an external leak or (on C6.4 ACERT-equipped units) an internal EGR cooler leak, a failed level switch/float, or a wiring fault | Visually check coolant level and inspect for external leaks; on ACERT units also check for coolant loss into the exhaust or oil from the EGR cooler; test the level switch and top up with the correct coolant if low |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
320D RR attachments & work tools
Buckets
Bucket pin diameter for this size class is 80mm (3.15 in), used consistently across pin-on and quick-coupler-mount buckets. General-purpose buckets run roughly 1.0m (39 in) to 1.40m (55 in) wide, with capacity from about 1.0 m³ up to 1.14 m³ at the wider end; heavy-duty and rock buckets trade width for reinforced sidewalls and wear protection, typically 0.9-1.2 m³ depending on width and configuration. Both pin-on and coupler-mount buckets are used on this class, with coupler-mount versions sharing the same 80mm pin bore plus matching coupler ear geometry.
Hydraulic hammers
This machine sits in the 20-24 tonne carrier class used for hammer sizing, marketed by attachment vendors as the 20-ton class. The medium-duty breaker range for this class runs roughly 1.5-3.0 tonnes service weight with oil flow near 120-230 L/min (32-60 gpm) at operating pressure around 14,000-16,000 kPa; exact flow and pressure targets vary by hammer brand and model, so match against the specific breaker's data plate before hookup.
Quick couplers
Hydraulic pin-grabber couplers are the standard style for this class, letting the operator drop and pick up buckets and attachments from the cab without driving pins by hand; wedge-style hydraulic couplers are offered as an alternative. Coupler geometry matches the machine's 80mm pin bore, sized for the roughly 16-25 tonne excavator class this machine falls into.
Thumbs/grapples
Hydraulic thumbs are the common upgrade for this class, working alongside the bucket to grip irregular material such as rock, stumps, and debris. Hydraulic rotating grapples with 360-degree rotation are also offered for this size machine for log and demolition-debris handling; both mount through the same pin or coupler interface used by buckets.
Rippers
Single-shank rippers are the standard ripper configuration for this size class, used to break hard or frozen ground and light rock ahead of digging. A typical unit for this class runs roughly 1.4m (55 in) overall length with about a 1.1m (43 in) shank, mounted through the same 80mm pin bore and stick linkage as the bucket rather than a dedicated hydraulic circuit.
Hydraulic-kit notes
An auxiliary hydraulic valve is needed to run hammers, thumbs, or grapples and is typically a factory-fit option on this class rather than standard equipment, so confirm it is fitted before ordering a tool. Medium-pressure auxiliary circuits serve hammers, shears, and grapples, while high-flow circuits serve tools like pulverizers and vibratory plate compactors; tool flow demand across this carrier class runs roughly 120-230 L/min and must be matched to the specific tool rather than assumed from the base machine's main system pressure.
All 320D RR assemblies by section
Every catalogued assembly group for the Caterpillar 320D RR. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
239-6653 Air Cleaner Gp
| 16***01 | Air Cleaner Group | 1 |
| 23***53 | Air Cleaner Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
162-6201 Air Cleaner Gp
| 13***21 | Filter Element As-Air; (Secondary) | 1 |
| 13***22 | Filter Element As-Air; (Primary) | 1 |
| 13***24 | Seal; (266.7-mm Id X 6.9-mm Thk) | 1 |
5i-7589 Cartridge As-Turbocharger
| 13***46 | Plate | 1 |
| 13***47 | Bearing-Thrust | 1 |
| 13***48 | Deflector-Oil | 1 |
255-3044 Extension Gp-Exhaust
| 25***44 | Extension Group-Exhaust | 1 |
| 26***46 | Pipe | 1 |
| 4I***54 | Clamp | 1 |
239-6652 Lines Gp-Air
| 16***28 | Hose-Air | 1 |
| 23***52 | Lines Group-Air | 1 |
| 26***41 | Hose-Air | 1 |
245-9232 Lines Gp-Air
| 20***27 | Hose | 1 |
| 21***19 | Hose | 1 |
| 21***20 | Hose | 1 |
162-6184 Lines Gp-Muffler Drain
| 09***61 | Strap; (Cable) | 1 |
| 16***84 | Lines Group-Muffler Drain | 1 |
| 17***72 | Pipe As | 1 |
212-8552 Manifold Gp-Exhaust
| 09***74 | Nut; (M8x1.25-Thd) | 2 |
| 17***52 | Manifold | 1 |
| 17***53 | Gasket | 2 |
212-8551 Manifold Gp-Inlet
| 16***57 | Heater As; (24-Volt) | 1 |
| 21***51 | Manifold Group-Inlet | 1 |
| 21***77 | Manifold | 1 |
266-6344 Muffler Gp
| 09***83 | Clamp Assembly. | 1 |
| 17***54 | Stud; (M10x1.5x15-mm, M10x1.25x20-mm) | 3 |
| 26***19 | Bracket | 1 |
233-1159 Turbocharger Gp
| 23***59 | Turbocharger Group | 1 |
| 23***66 | Housing | 1 |
| 5B***04 | Drive Screw--Turbocharger Warning Plate | 2 |
5i-8018 Turbocharger Gp
| 5I***87 | Cover | 1 |
| 5I***89 | Cartridge As-Turbocharger | 1 |
| 5I***02 | Coupling As | 1 |
Basic Engine
178-6512 Camshaft Gp
| 09***28 | Key | 1 |
| 17***12 | Camshaft Group | 1 |
| 17***35 | Camshaft | 1 |
212-8545 Cover Gp-Valve Mechanism
| 17***83 | Gasket | 6 |
| 21***45 | Cover Group-Valve Mechanism | 1 |
| 25***93 | Gasket; (Valve Cover) | 2 |
212-8549 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 12***05 | Crankshaft Group | 1 |
212-8566 Cylinder Block Gp
| 09***41 | Bolt-Bearing Cap; (M14x2x120-mm) | 14 |
| 09***05 | Cap | 2 |
| 09***11 | Cap | 1 |
212-8546 Cylinder Block Gp
| 09***01 | Washer; (3mm Thk) | 2 |
| 21***46 | Cylinder Block Group | 1 |
| 21***66 | Cylinder Block Group | 1 |
310-9635 Cylinder Head As
| 09***38 | Washer; (7.8x13.5x2-mm Thk) | 1 |
| 09***88 | Cap | 3 |
| 18***72 | Guide; (Intake) | 3 |
310-9634 Cylinder Head As
| 09***88 | Cap | 3 |
| 18***72 | Guide; (Intake) | 3 |
| 18***73 | Guide; (Exhaust) | 3 |
212-8543 Cylinder Head Gp
| 09***38 | Washer; (7.8x13.5x2-mm Thk) | 4 |
| 18***15 | Pipe | 1 |
| 21***43 | Cylinder Head Group | 1 |
255-2877 Drive Gp-Fan
| 21***93 | Plate | 1 |
| 21***96 | Bushing | 2 |
| 25***71 | Washer; (10.5x38x7-mm Thk) | 1 |
205-6792 Flywheel Gp
| 09***01 | Washer; (3mm Thk) | 6 |
| 20***88 | Gear; (127-Teeth) | 1 |
| 20***92 | Flywheel Group | 1 |
212-8550 Gear Gp-Front
| 21***50 | Gear Group-Front | 1 |
| 21***76 | Gear; (137.79mm Od) | 1 |
| 22***02 | Plate | 1 |
196-7972 Housing Gp-Flywheel
| 12***65 | Housing | 1 |
| 19***72 | Housing Group-Flywheel | 1 |
| 32***31 | Sensor Group-Speed; (Engine) | 1 |
212-8547 Housing Gp-Front
| 09***35 | Plug-Drain | 1 |
| 09***28 | Seal-O-Ring (Id=109.5mm) | 1 |
| 09***32 | Washer; (15.8x22.5x2-mm Thk) | 1 |
266-6316 Mounting Gp-Alternator
| 09***01 | Washer; (3mm Thk) | 3 |
| 09***83 | Bolt; (M12 X 1.25 X 30mm) | 1 |
| 17***98 | Bolt; (M12x1.25x135-mm) | 1 |
266-6297 Mounting Gp-Engine
| 10***29 | Washer; (21.5x120x8-mm Thk) | 4 |
| 11***84 | Bracket-Rear | 2 |
| 11***85 | Bracket-Front | 2 |
125-2963 Mounting Gp-Starting Motor
| 12***63 | Mounting Group-Starting Motor | 1 |
| 13***69 | Cover | 1 |
| 13***70 | Bolt; (M5x0.8x25-mm) | 1 |
178-6516 Pan Gp-Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***68 | Gasket | 1 |
| 13***02 | Gauge; (Dipstick)(Engine Oil Level) | 1 |
233-1157 Piston & Rod Gp
| 09***34 | Pin | 6 |
| 09***54 | Bolt; (M12x1.25-1x85-mm) | 2 |
| 09***16 | Nut; (M12x1.25-Thd) | 2 |
212-8548 Piston & Rod Gp
| 09***34 | Pin | 6 |
| 09***54 | Bolt; (M12x1.25-1x85-mm) | 2 |
| 09***16 | Nut; (M12x1.25-Thd) | 2 |
324-4112 Pulley Gp
| 21***96 | Bushing | 2 |
| 25***71 | Washer; (10.5x38x7-mm Thk) | 1 |
| 25***73 | Bolt As | 1 |
266-6317 Pulley Gp-Engine
| 21***84 | Pulley | 1 |
| 21***85 | Belt-Serpentine; (Fan) | 1 |
| 26***17 | Pulley Group-Engine | 1 |
239-6561 Pulley Gp-Engine
| 21***84 | Pulley | 1 |
| 22***72 | Belt-Serpentine; (Fan) | 1 |
| 23***61 | Pulley Group-Engine | 1 |
266-6313 Pulley Gp-Engine
| 21***84 | Pulley | 1 |
| 21***85 | Belt-Serpentine; (Fan) | 1 |
| 22***71 | Pulley As; (Drive)(Drive) | 1 |
255-3018 Pulley Gp-Idler
| 23***26 | Pulley-Idler | 1 |
| 23***27 | Bolt; (M8x1.25x110-mm) | 1 |
| 23***30 | Collar | 1 |
305-4908 Pulley Gp-Idler
| 29***84 | Pulley | 1 |
| 29***85 | Bearing | 2 |
| 29***86 | Ring | 1 |
183-8236 Pulley Gp-Idler
| 18***36 | Pulley Group-Idler | 1 |
| 18***37 | Bracket | 1 |
| 18***38 | Pulley | 1 |
212-8544 Valve Mechanism Gp
| 09***74 | Nut; (M8x1.25-Thd) | 1 |
| 09***96 | Plug | 1 |
| 09***25 | Screw | 1 |
Cooling System
178-6584 Cooler Gp-Engine Oil
| 09***21 | Plug | 2 |
| 12***70 | Core As-Oil Cooler | 1 |
| 17***84 | Cooler Group-Engine Oil | 1 |
247-7355 Cooling Ar
| 24***55 | Cooling Ar | 1 |
| 25***44 | Door Group-Radiator; -Perforated | 1 |
| 25***66 | Engine Ar-Complete | 1 |
230-2979 Fan Gp-Suction
| 11***18 | Clip | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 23***79 | Fan Group-Suction | 1 |
279-7786 Fan Gp-Suction
| 21***96 | Bushing | 2 |
| 26***32 | Bracket | 1 |
| 26***33 | Cover | 1 |
245-9313 Fan Gp-Suction
| 24***13 | Fan Group-Suction | 1 |
| 24***43 | Fan As; (10-Blade, Bolt Mtg Dia 170-mm) | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 6 |
266-6331 Fan Gp-Suction
| 21***96 | Bushing | 2 |
| 26***31 | Fan Group-Suction | 1 |
| 26***32 | Bracket | 1 |
217-5615 Lines Gp-Water
| 09***63 | Seal-O-Ring (Id=54.40mm) | 1 |
| 09***38 | Stud | 12 |
| 09***32 | Washer; (15.8x22.5x2-mm Thk) | 1 |
212-8555 Pump Gp-Water
| 12***47 | Washer; (1-mm Thk) | 1 |
| 17***33 | Pump Group-Water | 1 |
| 17***34 | Impeller | 1 |
265-3572 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 2 |
| 09***35 | Clamp | 2 |
245-9231 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 2 |
| 09***35 | Clamp | 2 |
245-9230 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
245-9233 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
Electrical And Starting System
132-1829 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***29 | Alarm Group; -Overload Warning | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
231-1771 Alarm Gp-Travel -Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 21***00 | Back-Up Alarm Assem. | 1 |
212-8561 Alternator Gp-Charging
| 08***29 | Nut Set | 1 |
| 09***13 | Nut Set | 1 |
| 13***81 | Plate | 1 |
238-2520 Battery & Wiring Gp
| 08***29 | Spacer; (9x19x30-mm Thk) | 4 |
| 09***68 | Grommet | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
259-5050 Battery Gp -Cold Weather
| 10***20 | Film-Instruction; (Cold Weather)(Start) | 1 |
| 25***50 | Battery Group; -Cold Weather | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 2 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
270-5542 Control & Mtg Gp-Communication -Product Link
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 27***32 | Bracket As | 1 |
| 27***42 | Control & Mtg Group-Communication; -Product Link | 1 |
260-2114 Control & Mtg Gp-Machine
| 22***74 | Control Group-Unprogrammed | 1 |
| 26***14 | Control & Mtg Group-Machine | 1 |
| 26***37 | Support As | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 26***42 | Software Group-Communication; (Product Link 300) | 1 |
227-7698 Electronics Gp-Machine
| 22***98 | Electronics Group-Machine | 1 |
| 29***74 | Software Group-Machine; (Software Only) | 1 |
| 29***75 | Service Group-Machine | 1 |
221-8861 Electronics Gp-Monitor
| 22***61 | Electronics Group-Monitor | 1 |
| 34***08 | Monitor Group-Operator | 1 |
| 34***10 | Software Group-Monitor | 1 |
259-5295 Fastener Gp-Wiring Harness -Joystick
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
251-0436 Fastener Gp-Wiring Harness
| 11***18 | Clip | 1 |
| 15***75 | Ladder Clip | 1 |
| 25***36 | Fastener Group-Wiring Harness | 1 |
251-0526 Fastener Gp-Wiring Harness -Straight Travel
| 11***18 | Clip | 1 |
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
259-5294 Fastener Gp-Wiring Harness -Foot Switch
| 11***18 | Clip | 1 |
| 25***94 | Fastener Group-Wiring Harness; -Foot Switch | 1 |
| 7X***21 | Bolt; (M10x1.5x12-mm) | 1 |
275-3670 Installation Ar-Communication -Product Link 121sr
| 27***41 | Mounting Group-Antenna; -Product Link 121sr | 1 |
| 27***70 | Installation Ar-Communication; -Product Link 121sr | 1 |
| 27***07 | Wiring Group-Communication; -Product Link 121sr | 1 |
275-3671 Installation Ar-Communication -Product Link 321sr
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 27***41 | Mounting Group-Antenna; -Product Link 121sr | 1 |
| 27***42 | Control & Mtg Group-Communication; -Product Link | 1 |
260-2124 Installation Gp-Security -Machine Security System
| 14***49 | Receptacle As. | 1 |
| 20***62 | Key As-Electronic; (Security) | 2 |
| 21***04 | Module Group-Interface; (Key)(Machine Security System) | 1 |
153-2521 Lamp Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
153-2522 Lamp Gp-Flood
| 15***22 | Lamp Group-Flood | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
167-3441 Lamp Gp-Flood
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
251-0201 Lighting Gp-Flood -Boom, Lh
| 11***36 | Clip | 4 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
163-6772 Lighting Gp-Flood -Cab
| 16***72 | Lighting Group-Flood; -Cab | 1 |
| 16***95 | Strap; (Cable) | 2 |
| 16***13 | Cover; (Lh) | 1 |
267-7749 Lighting Gp-Flood -Chassis
| 13***89 | Clip; (Ladder) | 1 |
| 15***22 | Lamp Group-Flood | 1 |
| 24***05 | Receptacle As-Connector; (2-Pin) | 1 |
267-7884 Lighting Gp-Flood -Boom, Rh
| 11***36 | Clip | 1 |
| 13***84 | Bracket | 1 |
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
170-9294 Lighting Gp-Flood -Cab Guard
| 16***95 | Strap; (Cable) | 2 |
| 17***94 | Lighting Group-Flood; -2-Lamp, Cab Guard | 1 |
| 17***95 | Harness As-Lighting; (Cab Floodlights, Front) | 2 |
238-2294 Panel & Mtg Gp-Circuit Breaker
| 23***94 | Panel & Mtg Group-Circuit Breaker | 1 |
| 23***95 | Panel Group-Circuit Breaker | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
238-2295 Panel Gp-Circuit Breaker
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***14 | Switch As-Magnetic; (24-Volt)(Heater Relay) | 1 |
| 12***23 | Block; (Terminal) | 1 |
251-0544 Panel Gp-Switch -Engine Speed, Start
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
251-0542 Panel Gp-Switch -Engine Speed, Start
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
272-4774 Starting Motor Gp-Electric
| 09***50 | Stopper Set | 1 |
| 09***80 | Packing | 2 |
| 09***85 | Bolt Set | 1 |
125-2988 Starting Motor Gp-Electric
| 09***50 | Stopper Set | 1 |
| 09***80 | Packing | 2 |
| 09***85 | Bolt Set | 1 |
7n-0719 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 1 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***19 | Switch Group-Disconnect; -Battery | 1 |
259-5274 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
106-0107 Switch Gp-Rotary -Throttle Position
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
| 10***10 | Seal | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
238-2478 Switch Gp-Toggle -Quick Coupler
| 23***78 | Switch Group-Toggle; -Quick Coupler-Quick Coupler Lock | 1 |
| 23***79 | Harness As-Wiring; (Quick Coupler Switch) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
238-2485 Switch Gp-Toggle -Quick Coupler Lock
| 23***78 | Switch Group-Toggle; -Quick Coupler-Quick Coupler Lock | 1 |
| 23***85 | Switch Group-Toggle; -Quick Coupler Lock | 1 |
| 25***84 | Bracket As; (Quick Coupler) | 1 |
264-8484 Warning Ar-Overload
| 25***16 | Wiring Group-Overload Warning | 1 |
| 26***84 | Warning Ar-Overload | 1 |
| 26***23 | Lines Group-Sensor; -Overload Warning Device | 1 |
251-0204 Wiring Gp-Aux Start Receptacle -Jump Start
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
259-5219 Wiring Gp-Auxiliary Control -1-Pump/2-Pump, 1-Way
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***75 | Ladder Clip | 1 |
| 24***09 | Receptacle As-Connector; (8-Pin) | 1 |
259-5042 Wiring Gp-Cab -Jump Start
| 09***80 | Switch-Magnetic; (24-Volt)(Start Relay) | 1 |
| 09***23 | Screw; (M3x0.5x10-mm) | 3 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 3 |
251-0529 Wiring Gp-Cab -1-Way/2-Way Flow
| 11***18 | Clip | 2 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 1 |
| 24***08 | Receptacle As-Connector; (6-Pin) | 1 |
259-5218 Wiring Gp-Chassis
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***75 | Ladder Clip | 1 |
| 20***11 | Strap; (Cable) | 3 |
267-7727 Wiring Gp-Combined Flow
| 11***18 | Clip | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 9 |
275-6807 Wiring Gp-Communication -Product Link 121sr
| 11***18 | Clip | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
| 23***10 | Plug As-Connector; (6-Pin) | 1 |
275-6804 Wiring Gp-Communication -Product Link 321sr
| 11***37 | Clip | 1 |
| 27***04 | Wiring Group-Communication; -Product Link 321sr | 1 |
| 27***05 | Harness As-Control; (Product Link) | 1 |
231-1836 Wiring Gp-Console -Lh
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***95 | Strap; (Cable) | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
251-0433 Wiring Gp-Console
| 23***36 | Wiring Group-Console; -Lh | 1 |
| 25***33 | Wiring Group-Console | 1 |
| 25***35 | Wiring Group-Console; -Rh | 1 |
251-0435 Wiring Gp-Console -Rh
| 10***64 | Connector-Plug | 1 |
| 10***65 | Terminal; (Female) | 14 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
251-0485 Wiring Gp-Converter
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 2 |
| 25***83 | Bracket | 2 |
| 25***85 | Wiring Group-Converter; -12-Volt, 7-Ampere | 1 |
231-1767 Wiring Gp-Converter -12-Volt, 7-Ampere
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 2 |
| 23***67 | Wiring Group-Converter; -12-Volt, 7-Ampere | 1 |
| 28***83 | Converter-Power; (24-Volt To 12-Volt) | 2 |
251-0482 Wiring Gp-Converter
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
| 25***82 | Wiring Group-Converter; -12-Volt, 7-Ampere | 1 |
| 25***83 | Bracket | 1 |
231-1766 Wiring Gp-Converter
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
| 23***66 | Wiring Group-Converter | 1 |
| 28***83 | Converter-Power; (24-Volt To 12-Volt) | 1 |
251-0206 Wiring Gp-Fan
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***18 | Sensor Group-Temperature; (Intake Manifold Air) | 1 |
| 11***50 | Sleeve (31cm); (31-cm) | 0 |
259-5215 Wiring Gp-Fine Swing
| 11***36 | Clip | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 24***05 | Receptacle As-Connector; (2-Pin) | 1 |
259-5220 Wiring Gp-Medium Pressure
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 24***08 | Receptacle As-Connector; (6-Pin) | 1 |
| 25***20 | Wiring Group-Medium Pressure | 1 |
259-5216 Wiring Gp-Overload Warning
| 11***36 | Clip | 1 |
| 11***18 | Clip | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
259-5041 Wiring Gp-Platform
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
251-0202 Wiring Gp-Quick Coupler
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
| 24***05 | Receptacle As-Connector; (2-Pin) | 1 |
| 25***02 | Wiring Group-Quick Coupler | 1 |
251-0203 Wiring Gp-Sensor -Filter Bypass
| 11***36 | Clip | 1 |
| 11***18 | Clip | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
238-2208 Switch Gp-Wiper -Lower
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
| 23***08 | Wiring Group-Window Wiper; -Lower | 1 |
Engine Arrangement
239-6568 Engine Ar
| 12***63 | Mounting Group-Starting Motor | 1 |
| 12***88 | Starting Motor Group-Electric | 1 |
| 17***02 | Breather Group; -Crankcase | 1 |
272-4638 Engine Ar
| 12***63 | Mounting Group-Starting Motor | 1 |
| 12***88 | Starting Motor Group-Electric | 1 |
| 17***02 | Breather Group; -Crankcase | 1 |
287-0103 Engine Ar
| 12***63 | Mounting Group-Starting Motor | 1 |
| 17***02 | Breather Group; -Crankcase | 1 |
| 17***12 | Camshaft Group | 1 |
266-6155 Engine Ar
| 23***79 | Fan Group-Suction | 1 |
| 23***69 | Engine Ar-Complete | 1 |
| 26***55 | Engine Ar | 1 |
287-0102 Engine Ar
| 12***63 | Mounting Group-Starting Motor | 1 |
| 17***02 | Breather Group; -Crankcase | 1 |
| 17***12 | Camshaft Group | 1 |
266-6156 Engine Ar
| 23***67 | Engine Ar | 1 |
| 24***13 | Fan Group-Suction | 1 |
| 26***56 | Engine Ar | 1 |
239-6567 Engine Ar
| 23***67 | Engine Ar | 1 |
| 26***13 | Pulley Group-Engine | 1 |
| 27***38 | Engine Ar | 1 |
255-3066 Engine Ar-Complete
| 25***66 | Engine Ar-Complete | 1 |
| 26***17 | Pulley Group-Engine | 1 |
| 27***38 | Engine Ar | 1 |
239-6569 Engine Ar-Complete
| 23***61 | Pulley Group-Engine | 1 |
| 23***68 | Engine Ar | 1 |
| 23***69 | Engine Ar-Complete | 1 |
287-0088 Engine Ar-Complete
| 26***17 | Pulley Group-Engine | 1 |
| 28***88 | Engine Ar-Complete | 1 |
| 28***03 | Engine Ar | 1 |
287-0086 Engine Ar-Complete
| 23***61 | Pulley Group-Engine | 1 |
| 28***86 | Engine Ar-Complete | 1 |
| 28***02 | Engine Ar | 1 |
287-0087 Engine Ar-Complete
| 26***13 | Pulley Group-Engine | 1 |
| 28***87 | Engine Ar-Complete | 1 |
| 28***03 | Engine Ar | 1 |
239-6651 Installation Ar-Engine
| 16***84 | Lines Group-Muffler Drain | 1 |
| 16***85 | Lines Group-Engine Oil Drain | 1 |
| 23***07 | Compressor Group-Refrigerant | 1 |
266-6184 Installation Ar-Engine
| 16***84 | Lines Group-Muffler Drain | 1 |
| 16***85 | Lines Group-Engine Oil Drain | 1 |
| 23***07 | Compressor Group-Refrigerant | 1 |
Frame And Body
240-2964 Box & Mounting Gp
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 2 |
| 09***00 | Washer; (12.7x30x4-mm Thk) | 2 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 5 |
278-3741 Box & Mtg Gp-Storage
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 2 |
| 09***00 | Washer; (12.7x30x4-mm Thk) | 2 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 5 |
240-2965 Box Gp-Storage
| 13***55 | Bolt; (M8x1.25x8-mm) | 3 |
| 17***93 | Support | 1 |
| 17***07 | Cover As | 1 |
278-3742 Box Gp-Storage
| 17***93 | Support | 1 |
| 22***94 | Lock As | 1 |
| 22***40 | Cam | 1 |
251-2487 Bumper Gp
| 18***25 | Bumper As | 2 |
| 18***11 | Bumper As | 1 |
| 18***14 | Bumper As | 2 |
262-2219 Counterweight & Mounting Gp
| 12***02 | Plug | 2 |
| 26***19 | Counterweight & Mounting Group | 1 |
| 26***20 | Counterweight Group | 1 |
250-5030 Counterweight & Mounting Gp
| 12***02 | Plug | 2 |
| 25***30 | Counterweight & Mounting Group | 1 |
| 25***31 | Counterweight Group | 1 |
268-0570 Counterweight Gp
| 17***55 | Liner | 1 |
| 17***70 | Liner | 1 |
| 26***70 | Counterweight Group | 1 |
262-2220 Counterweight Gp
| 17***55 | Liner | 1 |
| 17***70 | Liner | 1 |
| 26***20 | Counterweight Group | 1 |
250-5031 Counterweight Gp
| 17***55 | Liner | 1 |
| 17***70 | Liner | 1 |
| 25***31 | Counterweight Group | 1 |
262-2622 Counterweight Gp
| 12***02 | Plug | 2 |
| 26***22 | Counterweight Group | 1 |
| 26***70 | Counterweight Group | 1 |
262-2630 Cover As-Sound Suppression -Hammer Filter
| 26***30 | Cover As-Sound Suppression; -Hammer Filter | 1 |
| 26***57 | Liner | 1 |
| 26***58 | Liner | 1 |
268-0279 Cover As-Sound Suppression
| 26***79 | Cover As-Sound Suppression | 1 |
| 26***80 | Liner | 1 |
| 26***81 | Liner | 1 |
268-0396 Cover Gp-Access -Hammer Filter
| 26***30 | Cover As-Sound Suppression; -Hammer Filter | 1 |
| 26***96 | Cover Group-Access; -Hammer Filter | 1 |
268-0401 Door Gp-Access
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***76 | Hinge | 2 |
| 17***85 | Liner | 1 |
278-3828 Door Gp-Access
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***76 | Hinge | 2 |
| 17***85 | Liner | 1 |
268-0300 Door Gp-Access
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 17***84 | Hinge | 2 |
| 26***00 | Door Group-Access | 1 |
286-6253 Door Gp-Access
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 17***84 | Hinge | 2 |
| 26***01 | Liner | 1 |
250-5044 Door Gp-Radiator -Perforated
| 25***44 | Door Group-Radiator; -Perforated | 1 |
| 26***97 | Door Group-Radiator; -Perforated | 1 |
268-0397 Door Gp-Radiator -Perforated
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 14***42 | Lock Assem. | 1 |
| 16***76 | Hinge | 2 |
250-5041 Fender & Cover Gp
| 12***26 | Spacer; (13x25x25-mm Thk) | 5 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 13 |
| 13***77 | Bolt As; (M12x1.75x35-mm) | 9 |
248-1771 Frame Gp-Upper
| 09***83 | Shim (1.0 mm Thick) | 4 |
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
267-6739 Gear & Bearing Gp-Swing
| 09***02 | Pin, Dowel | 1 |
| 14***78 | Bolt; (M20x2.5x90-mm) | 40 |
| 14***89 | Tube As | 1 |
227-6081 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 22***71 | Seal; (Dust) | 1 |
| 22***81 | Gear & Bearing Group-Swing | 1 |
262-2615 Guard Gp-Bottom
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 42 |
| 20***08 | Sheet As | 1 |
| 26***15 | Guard Group-Bottom | 1 |
262-2616 Guard Gp-Bottom -Heavy-Duty
| 21***78 | Plate As | 1 |
| 26***16 | Guard Group-Bottom; -Heavy-Duty | 1 |
| 26***21 | Plate As | 1 |
250-5034 Guard Gp-Bottom -Heavy-Duty
| 21***78 | Plate As | 1 |
| 25***34 | Guard Group-Bottom; -Heavy-Duty | 1 |
| 26***21 | Plate As | 1 |
134-8850 Guard Gp-Swivel
| 13***76 | Plate | 4 |
| 13***50 | Guard Group-Swivel; (Swivel) | 1 |
| 13***51 | Plate As | 1 |
175-5616 Handrail Gp
| 12***48 | Pipe Assem. | 1 |
| 13***92 | Sleeve Assem. | 1 |
| 13***94 | Bolt; (M12x1.75x53-mm)(M12x1.75'Thd) | 2 |
262-2613 Hood & Guard Gp
| 08***08 | Shim (1.0mm Thick) | 4 |
| 08***09 | Shim (2.0mm Thick) | 4 |
| 09***26 | Spacer; (19x32x2-mm Thk) | 2 |
250-5035 Hood & Guard Gp
| 08***08 | Shim (1.0mm Thick) | 4 |
| 08***09 | Shim (2.0mm Thick) | 4 |
| 09***26 | Spacer; (19x32x2-mm Thk) | 2 |
268-0359 Hood Gp-Engine
| 09***29 | Cushion | 2 |
| 10***48 | Seal; (0.5-M Each) | 0 |
| 11***89 | Hinge | 2 |
268-0360 Hood Gp-Engine
| 09***29 | Cushion | 2 |
| 10***48 | Seal; (0.5-M Each) | 0 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 8 |
266-6315 Insulation Gp-Heat
| 26***15 | Insulation Group-Heat | 1 |
| 26***22 | Insulator; (Heat) | 1 |
| 26***23 | Insulator; (Heat) | 1 |
268-0475 Panel Gp-Enclosure
| 13***55 | Bolt; (M8x1.25x8-mm) | 4 |
| 17***89 | Handle As | 1 |
| 23***86 | Seal; (73-cm Each) | 0 |
268-0353 Sheet As-Sound Suppression
| 26***53 | Sheet As-Sound Suppression | 1 |
| 26***54 | Liner | 1 |
| 26***55 | Liner | 1 |
268-0347 Sheet As-Sound Suppression
| 26***47 | Sheet As-Sound Suppression | 1 |
| 26***48 | Liner | 1 |
| 26***49 | Liner | 1 |
268-0310 Sheet As-Sound Suppression
| 17***53 | Liner | 1 |
| 17***58 | Insulation | 2 |
| 19***37 | Liner | 1 |
262-2629 Sheet As-Sound Suppression
| 17***53 | Liner | 1 |
| 17***58 | Insulation | 1 |
| 19***37 | Liner | 1 |
262-2634 Sheet As-Sound Suppression
| 26***34 | Sheet As-Sound Suppression | 1 |
| 26***49 | Liner | 1 |
| 26***50 | Liner | 1 |
235-7764 Step Gp
| 23***64 | Step Group | 1 |
| 23***65 | Step | 2 |
| 8T***38 | Bolt-Pipe As To Main Pump Suction Port | 4 |
Fuel System
319-4234 Cable Gp-Governor Control -Governor
| 18***89 | Harness As-Wiring; (Governor Actuator, Test) | 1 |
| 24***54 | Harness As-Engine; (Governor Breakout) | 1 |
| 30***61 | Kit-Motor Repair; (Governor Control) | 1 |
171-2607 Control Gp-Governor
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 15***49 | Bracket As | 1 |
| 15***60 | Joint | 2 |
212-8560 Filter Gp-Fuel
| 06***39 | Seal-O-Ring | 1 |
| 09***25 | Plug | 1 |
| 09***26 | Bolt; (M14x1.5x26-mm) | 2 |
262-2247 Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 9 |
| 13***99 | Grommet | 2 |
212-8558 Lines Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 09***81 | Clamp | 8 |
| 09***96 | Clamp | 2 |
212-8470 Nozzle Gp-Unit Injector
| 08***75 | Nut | 1 |
| 09***28 | Spring | 1 |
| 09***78 | Pin | 2 |
233-1161 Nozzle Gp-Unit Injector
| 08***75 | Nut | 1 |
| 09***28 | Spring | 1 |
| 09***78 | Pin | 2 |
279-7861 Pump Gp-Fuel Injection
| 08***19 | Shim (1.00mm Thick) | 1 |
| 08***20 | Shim (1.40mm Thick) | 1 |
| 08***23 | Bearing | 2 |
212-8559 Pump Gp-Fuel Injection
| 08***19 | Shim (1.00mm Thick) | 1 |
| 08***20 | Shim (1.40mm Thick) | 1 |
| 08***23 | Bearing | 2 |
255-2969 Pump Gp-Fuel Priming
| 08***22 | Adapter | 1 |
| 08***88 | Eye Bolt | 1 |
| 08***99 | Eye Bolt | 1 |
248-9024 Separator Gp-Water
| 11***18 | Clip | 1 |
| 17***91 | Separator Group-Water; -With Bowl & Water Sensor | 1 |
| 24***24 | Separator Group-Water | 1 |
171-9091 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
145-8862 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
268-0742 Tank & Mtg Gp-Fuel
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 08***38 | Shim (1.0mm Thick); (1.0 mm Thick) | 4 |
| 08***39 | Shim (0.7mm Thick); (0.7 mm Thick) | 4 |
268-0743 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
Hydraulic System
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***67 | Cap | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
164-6981 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
259-7609 Control Ar-Auxiliary -Combined Function
| 23***95 | Control Group-Hydraulic Pedal; (Hydraulic Pedal) | 1 |
| 24***24 | Film Group; -Operator Controls, Notice | 1 |
| 25***29 | Wiring Group-Cab; -1-Way/2-Way Flow | 1 |
259-7611 Control Ar-Auxiliary -1-Pump/2-Pump, 1-Way Flow
| 25***13 | Valve & Mtg Group-Control; -Auxiliary | 1 |
| 25***19 | Wiring Group-Auxiliary Control; -1-Pump/2-Pump, 1-Way | 1 |
| 25***11 | Control Ar-Auxiliary; -1-Pump/2-Pump, 1-Way Flow | 1 |
259-7612 Control Ar-Auxiliary -System 14, Combined Function
| 25***13 | Valve & Mtg Group-Control; -Auxiliary | 1 |
| 25***12 | Control Ar-Auxiliary; -System 14, Combined Function | 1 |
| 26***05 | Lines Group-Front; -Combined Function | 1 |
255-5846 Control Ar-Auxiliary -Hammer, Foot Switch
| 23***96 | Control Group-Foot; -Work Tool | 1 |
| 24***65 | Film Group; -Hammer Control, Foot Switch | 1 |
| 25***46 | Control Ar-Auxiliary; -Hammer, Foot Switch | 1 |
259-7613 Control Ar-Auxiliary -Medium Flow
| 20***47 | Pump & Mtg Group-Auxiliary | 1 |
| 25***20 | Wiring Group-Medium Pressure | 1 |
| 25***13 | Control Ar-Auxiliary; -Medium Flow | 1 |
259-7608 Control Ar-Auxiliary -2-Pump, 1-Way, 1-Hyd Pedal
| 23***93 | Control Group-Hydraulic Pedal; -Work Tool | 1 |
| 24***23 | Film Group; -Operator Controls, Notice | 1 |
| 25***36 | Fastener Group-Wiring Harness | 1 |
259-7607 Control Ar-Auxiliary -1-Pump, 1-Way
| 23***93 | Control Group-Hydraulic Pedal; -Work Tool | 1 |
| 24***23 | Film Group; -Operator Controls, Notice | 1 |
| 25***36 | Fastener Group-Wiring Harness | 1 |
259-7610 Control Ar-Auxiliary -Combined Func, Medium Pressure
| 23***95 | Control Group-Hydraulic Pedal; (Hydraulic Pedal) | 1 |
| 24***23 | Film Group; -Operator Controls, Notice | 1 |
| 25***29 | Wiring Group-Cab; -1-Way/2-Way Flow | 1 |
247-9344 Control Ar-Coupler
| 23***85 | Switch Group-Toggle; -Quick Coupler Lock | 1 |
| 24***44 | Control Ar-Coupler | 1 |
| 25***02 | Wiring Group-Quick Coupler | 1 |
255-2943 Coupling Gp-Flexible
| 25***43 | Coupling Group-Flexible | 1 |
| 25***44 | Hub | 1 |
| 7Y***66 | Setscrew-Socket; (M16x2x22-mm) | 2 |
272-4795 Coupling Gp-Flexible
| 27***95 | Coupling Group-Flexible; -Pump | 1 |
| 27***96 | Hub | 1 |
| 7Y***66 | Setscrew-Socket; (M16x2x22-mm) | 2 |
162-6177 Coupling Gp-Pump
| 16***77 | Coupling Group-Pump | 1 |
| 27***95 | Coupling Group-Flexible; -Pump | 1 |
| 7Y***68 | Pin; (Spring) | 4 |
266-7971 Cylinder & Lines Gp-Boom -Rh
| 26***71 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 26***72 | Cylinder & Seal Group-Boom | 1 |
| 26***23 | Lines Group-Boom Cylinder; -Rh | 1 |
242-6749 Cylinder & Lines Gp-Boom -Rh
| 24***37 | Lines Group-Boom Cylinder; -Rh | 1 |
| 24***46 | Cylinder & Seal Group-Boom | 1 |
| 24***49 | Cylinder & Lines Group-Boom; -Rh | 1 |
266-7970 Cylinder & Lines Gp-Boom -Lh
| 26***70 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 26***72 | Cylinder & Seal Group-Boom | 1 |
| 26***22 | Lines Group-Boom Cylinder; -Lh | 1 |
242-6745 Cylinder & Lines Gp-Boom -Lh
| 24***32 | Lines Group-Boom Cylinder; -Lh | 1 |
| 24***45 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 24***46 | Cylinder & Seal Group-Boom | 1 |
242-6736 Cylinder & Lines Gp-Boom -Rh
| 24***31 | Cylinder & Seal Group-Boom | 1 |
| 24***36 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 24***37 | Lines Group-Boom Cylinder; -Rh | 1 |
242-6730 Cylinder & Lines Gp-Boom -Lh
| 24***30 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 24***31 | Cylinder & Seal Group-Boom | 1 |
| 24***32 | Lines Group-Boom Cylinder; -Lh | 1 |
266-7977 Cylinder & Lines Gp-Bucket
| 26***77 | Cylinder & Lines Group-Bucket | 1 |
| 26***78 | Cylinder & Seal Group-Bucket | 1 |
| 26***25 | Lines Group-Bucket Cylinder | 1 |
242-6755 Cylinder & Lines Gp-Bucket
| 24***55 | Cylinder & Lines Group-Bucket | 1 |
| 24***56 | Cylinder & Seal Group-Bucket | 1 |
| 24***57 | Lines Group-Bucket Cylinder | 1 |
242-6758 Cylinder & Lines Gp-Bucket
| 24***57 | Lines Group-Bucket Cylinder | 1 |
| 24***58 | Cylinder & Lines Group-Bucket | 1 |
| 24***59 | Cylinder & Seal Group-Bucket | 1 |
242-6743 Cylinder & Lines Gp-Stick
| 24***35 | Lines Group-Stick Cylinder | 1 |
| 24***43 | Cylinder & Lines Group-Stick | 1 |
| 24***44 | Cylinder & Seal Group-Stick | 1 |
266-7973 Cylinder & Lines Gp-Stick
| 26***73 | Cylinder & Lines Group-Stick | 1 |
| 26***74 | Cylinder & Seal Group-Stick | 1 |
| 26***24 | Lines Group-Stick Cylinder | 1 |
242-6747 Cylinder & Lines Gp-Stick
| 24***35 | Lines Group-Stick Cylinder | 1 |
| 24***47 | Cylinder & Lines Group-Stick | 1 |
| 24***48 | Cylinder & Seal Group-Stick | 1 |
242-6733 Cylinder & Lines Gp-Stick
| 24***33 | Cylinder & Lines Group-Stick | 1 |
| 24***34 | Cylinder & Seal Group-Stick | 1 |
| 24***35 | Lines Group-Stick Cylinder | 1 |
266-7972 Cylinder & Seal Gp-Boom
| 08***55 | Ring | 2 |
| 09***47 | Ring; (Retaining) | 1 |
| 09***67 | Seal-U-Cup | 1 |
242-6731 Cylinder & Seal Gp-Boom
| 08***55 | Ring | 2 |
| 09***47 | Ring; (Retaining) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
242-6746 Cylinder & Seal Gp-Boom
| 08***55 | Ring | 2 |
| 09***47 | Ring; (Retaining) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
242-6759 Cylinder & Seal Gp-Bucket
| 08***55 | Ring | 2 |
| 09***47 | Ring; (Retaining) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
242-6756 Cylinder & Seal Gp-Bucket
| 08***55 | Ring | 2 |
| 09***47 | Ring; (Retaining) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
266-7978 Cylinder & Seal Gp-Bucket
| 08***55 | Ring | 2 |
| 09***47 | Ring; (Retaining) | 1 |
| 09***67 | Seal-U-Cup | 1 |
266-7974 Cylinder & Seal Gp-Stick
| 08***04 | Ring; (Retaining) | 2 |
| 08***05 | Ring; (Retaining) | 1 |
| 09***31 | Ring; (Retaining) | 1 |
242-6748 Cylinder & Seal Gp-Stick
| 08***04 | Ring; (Retaining) | 2 |
| 08***05 | Ring; (Retaining) | 1 |
| 09***31 | Ring; (Retaining) | 1 |
242-6734 Cylinder & Seal Gp-Stick
| 08***04 | Ring; (Retaining) | 2 |
| 08***05 | Ring; (Retaining) | 1 |
| 09***31 | Ring; (Retaining) | 1 |
242-6744 Cylinder & Seal Gp-Stick
| 08***04 | Ring; (Retaining) | 2 |
| 08***05 | Ring; (Retaining) | 1 |
| 09***31 | Ring; (Retaining) | 1 |
274-2467 Cylinder Ar-Hydraulic -Cold Weather, B1-Fam, Long Stk
| 26***70 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 26***71 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 26***73 | Cylinder & Lines Group-Stick | 1 |
172-8402 Cylinder Gp-Coupler
| 09***28 | Fitting-Grease | 2 |
| 10***40 | Seal-O-Ring; (12.1-mm Id) | 1 |
| 17***02 | Cylinder Group-Coupler | 1 |
191-5537 Drive Gp-Auxiliary Pump
| 09***75 | Pin, Roller | 2 |
| 09***80 | Seal-O-Ring | 1 |
| 09***21 | Seal-O-Ring | 1 |
264-8755 Drive Gp-Pump
| 19***37 | Drive Group-Auxiliary Pump; (Auxiliary Pump) | 1 |
| 26***55 | Drive Group-Pump | 1 |
| 27***22 | Sheet As | 1 |
267-6740 Drive Gp-Swing -With Motor
| 14***44 | Drive Group-Swing; -Without Motor | 1 |
| 15***85 | Motor & Mtg Group-Swing | 1 |
| 18***21 | Connector As | 1 |
148-4644 Drive Gp-Swing -Without Motor
| 09***29 | Ring; (Retaining) | 2 |
| 09***84 | Washer; (40.3x72x1-mm Thk) | 6 |
| 09***11 | Washer; (47.3x76x1-mm Thk) | 6 |
227-6174 Fastener Gp-Swing & Final Dr
| 09***55 | Pin | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 22***74 | Fastener Group-Swing & Final Dr | 1 |
266-1026 Filter & Lines Gp-Hydraulic
| 09***06 | Seal-O-Ring (Id=59.40mm) | 1 |
| 11***34 | Tee-O-Ring | 1 |
| 12***12 | Fitting | 1 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
264-8672 Filter Ar-Hydraulic
| 25***03 | Wiring Group-Sensor; -Filter Bypass | 1 |
| 26***72 | Filter Ar-Hydraulic | 1 |
| 26***96 | Cover Group-Access; -Hammer Filter | 1 |
264-8483 Filter Ar-Hydraulic
| 25***03 | Wiring Group-Sensor; -Filter Bypass | 1 |
| 26***83 | Filter Ar-Hydraulic | 1 |
| 26***13 | Lines Group-Front; -Hammer | 1 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 28***94 | Filter Group-Oil; -Hydraulic, Case Drain | 1 |
| 28***95 | Head As-Filter | 1 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 09***81 | Seal-O-Ring | 1 |
| 13***23 | Seal-O-Ring | 4 |
| 13***24 | Screw; (M3x0.5x5-mm) | 8 |
126-2075 Filter Gp-Oil
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
188-4145 Filter Gp-Oil -Hydraulic Return
| 09***57 | Screw-Machine; (M6x1x8.6-mm) | 4 |
| 09***63 | Seal-O-Ring (Id=54.40mm) | 2 |
| 09***82 | Seal-O-Ring | 1 |
224-1687 Filter Gp-Oil -Hydraulic
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
| 09***73 | Plug, Shipping | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***57 | Pipe | 1 |
256-0093 Head Gp-Pump -Drive
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 11 |
256-0096 Head Gp-Pump -Driven
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 7 |
259-7636 Hydraulic Ar
| 23***17 | Lines Group-Travel Motor; -Long Undercarriage | 1 |
| 23***52 | Pump & Mtg Group-Main Hydraulic | 1 |
| 24***59 | Tank & Mtg Group-Hydraulic | 1 |
239-8964 Hydraulic Ar
| 23***17 | Lines Group-Travel Motor; -Long Undercarriage | 1 |
| 23***52 | Pump & Mtg Group-Main Hydraulic | 1 |
| 23***64 | Hydraulic Ar | 1 |
239-8963 Hydraulic Ar
| 23***16 | Lines Group-Travel Motor | 1 |
| 23***52 | Pump & Mtg Group-Main Hydraulic | 1 |
| 23***63 | Hydraulic Ar | 1 |
264-8605 Hydraulic Ar-Biodegradable Oil
| 11***84 | Motor & Mtg Group-Travel | 2 |
| 26***05 | Hydraulic Ar-Biodegradable Oil | 1 |
247-7358 Lift Ar -Increased Lift
| 24***58 | Lift Ar; -Increased Lift | 1 |
| 25***02 | Valve Group-Main Control; -Heavy Lift | 1 |
| 26***25 | Lines Group-Pilot; -Heavy Lift | 1 |
247-9338 Lines Gp-Auxiliary Hydraulic -Medium Pressure
| 09***91 | Clamp, Single | 2 |
| 09***95 | Clamp, Double | 2 |
| 15***67 | Clip; (Slot) | 2 |
237-3184 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 12***80 | Tube As | 1 |
| 13***63 | Flange; (Mkb 1400n, 1600n) | 2 |
| 14***82 | Tube As | 1 |
262-3331 Lines Gp-Auxiliary Hydraulic -Combined Function, High Flow
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 4 |
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 8 |
242-6483 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 10***50 | Hose As | 1 |
| 17***16 | Clamp-Half | 6 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
262-3332 Lines Gp-Auxiliary Hydraulic -System 14, Combined Function
| 09***32 | Seal-O-Ring (Id=28.24mm) | 2 |
| 10***00 | Bolt-Socket Head; (M10x1.5x110-mm) | 4 |
| 10***79 | Bolt-Socket Head; (M10x1.5x90-mm) | 8 |
247-9337 Lines Gp-Auxiliary Hydraulic -Medium Pressure
| 09***91 | Clamp, Single | 2 |
| 09***96 | Clamp, Double | 2 |
| 10***15 | Elbow Group | 1 |
242-6487 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 17***16 | Clamp-Half | 4 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
262-3330 Lines Gp-Auxiliary Hydraulic -1-Way, High Pressure
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 4 |
242-6492 Lines Gp-Auxiliary Hydraulic -Stick, Medium Pressure
| 14***38 | Clip | 4 |
| 18***77 | Plate | 2 |
| 18***78 | Support As | 1 |
242-6484 Lines Gp-Auxiliary Hydraulic -Stick, Medium Pressure
| 14***38 | Clip | 12 |
| 17***06 | Hose As | 2 |
| 18***77 | Plate | 2 |
262-3329 Lines Gp-Auxiliary Hydraulic -2-Way, High Flow
| 12***74 | Plate | 2 |
| 15***98 | Plate | 2 |
| 26***29 | Lines Group-Auxiliary Hydraulic; -2-Way, High Flow | 1 |
242-6488 Lines Gp-Auxiliary Hydraulic -Stick, Medium Pressure
| 14***38 | Clip | 8 |
| 17***72 | Hose As | 2 |
| 18***77 | Plate | 2 |
247-9341 Lines Gp-Boom -Stick Lowering Control Valve
| 10***71 | Hose As (Nom 06, L=2430mm) | 2 |
| 14***52 | Union As | 2 |
| 18***33 | Plate | 2 |
248-9673 Lines Gp-Boom
| 15***38 | Plate | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
| 24***21 | Hose As | 1 |
266-8023 Lines Gp-Boom Cylinder -Rh
| 09***20 | Holder | 2 |
| 13***09 | Support As | 1 |
| 22***24 | Tube As | 1 |
266-1018 Lines Gp-Boom Cylinder -Lowering Control
| 11***04 | Support As | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
242-6732 Lines Gp-Boom Cylinder -Lh
| 09***20 | Holder | 2 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 13***09 | Support As | 1 |
260-8170 Lines Gp-Boom Cylinder
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 4 |
| 10***50 | Clamp | 1 |
| 12***86 | Grommet | 1 |
242-6737 Lines Gp-Boom Cylinder -Rh
| 09***20 | Holder | 2 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 13***09 | Support As | 1 |
266-8022 Lines Gp-Boom Cylinder -Lh
| 09***20 | Holder | 2 |
| 13***09 | Support As | 1 |
| 22***26 | Tube As | 1 |
187-5693 Lines Gp-Bucket Cylinder
| 18***93 | Lines Group-Bucket Cylinder | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
260-8011 Lines Gp-Bucket Cylinder
| 18***58 | Hose As | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
242-6757 Lines Gp-Bucket Cylinder
| 09***97 | Seal-O-Ring (Id=29.70mm) | 1 |
| 09***12 | Support As | 1 |
| 09***80 | Holder | 1 |
266-8025 Lines Gp-Bucket Cylinder
| 09***12 | Support As | 1 |
| 09***80 | Holder | 1 |
| 12***34 | Support As | 1 |
187-5976 Lines Gp-Bucket Cylinder
| 10***20 | Elbow As. | 1 |
| 10***79 | Hose As. | 2 |
| 10***91 | Elbow As. | 1 |
260-8171 Lines Gp-Control -Rear
260-8169 Lines Gp-Control -Front
| 10***03 | Bolt; (Socket Head) (M10x1.5x80mm) | 2 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 62 |
| 10***79 | Bolt-Socket Head; (M10x1.5x90-mm) | 4 |
262-3496 Lines Gp-Coupler -B1-Family Linkage
| 17***51 | Coupler Group-Quick | 1 |
| 26***96 | Lines Group-Coupler; -B1-Family Linkage | 1 |
| 27***45 | Hose As | 1 |
242-6494 Lines Gp-Coupler
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
| 21***66 | Hose As | 2 |
242-6486 Lines Gp-Coupler
| 13***80 | Clip | 2 |
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
247-9340 Lines Gp-Coupler -Reach Boom
| 13***80 | Clip | 3 |
| 17***74 | Clip As | 1 |
| 18***33 | Plate | 1 |
242-6490 Lines Gp-Coupler
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
| 24***90 | Lines Group-Coupler; -Stick | 1 |
260-8181 Lines Gp-Front -System 3 Prime, 1-Way, 2-Pump
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
| 14***81 | Block | 1 |
266-1027 Lines Gp-Front -Quick Coupler
| 08***69 | Hose As | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
| 14***25 | Connector As. | 2 |
278-6528 Lines Gp-Front -Hammer
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 4 |
| 14***57 | Elbow As. | 3 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
260-8178 Lines Gp-Front
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 14***57 | Elbow As. | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
266-1013 Lines Gp-Front -Hammer
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 4 |
| 14***57 | Elbow As. | 3 |
| 22***87 | Filter Group-Oil; -Hydraulic | 1 |
266-1005 Lines Gp-Front -Combined Function
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
260-8183 Lines Gp-Front -System 2, Combined Function
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 8 |
| 14***57 | Elbow As. | 3 |
260-8186 Lines Gp-Front
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 2 |
| 26***86 | Lines Group-Front | 1 |
| 27***64 | Hose As | 1 |
260-8172 Lines Gp-Hydraulic Oil Cooler
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 8 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 16 |
| 17***47 | Plate | 1 |
266-1017 Lines Gp-Pilot -2-Way
| 08***84 | Hose As. | 2 |
| 10***84 | Guard | 1 |
| 11***45 | Guard | 1 |
255-1800 Lines Gp-Pilot -Pedal, Rh
| 08***02 | Hose As. | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
260-8174 Lines Gp-Pilot -Cab
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
260-8185 Lines Gp-Pilot -Combined Fctn, Medium Pressure
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***03 | Hose As (Nom 06, L=2300mm) | 1 |
| 08***73 | Hose As (Nom 06, L=1050mm) | 1 |
260-8190 Lines Gp-Pilot -1-Pump/2-Pump Flow
| 08***56 | 90 Degrees Elbow | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***58 | Hose As (Nom 06, L=550mm) | 1 |
260-8175 Lines Gp-Pilot -Main Control Valve
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***34 | Hose As | 1 |
| 08***91 | Hose As (Nom 06, L=2800mm) | 2 |
255-1843 Lines Gp-Pilot -Third Pedal, Pilot Valve
| 08***02 | Hose As. | 1 |
| 08***62 | Hose As | 1 |
| 08***65 | Hose As (Nom 06, L=570mm) | 2 |
266-1020 Lines Gp-Pilot -Boom Lowering Control
| 10***57 | Hose As (Nom 06, L=1950mm) | 1 |
| 11***67 | Hose As; (Nom 06, L=1100mm) | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
260-8177 Lines Gp-Pilot -Main Pump
| 08***56 | 90 Degrees Elbow | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
260-8182 Lines Gp-Pilot -2-Pump, 1-Way, 1-Hyd Pedal
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***75 | Hose As (Nom 06, L=1130mm) | 1 |
| 08***84 | Hose As. | 1 |
260-8180 Lines Gp-Pilot -1-Pump, 1-Way, Pedal
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***75 | Hose As (Nom 06, L=1130mm) | 1 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 1 |
266-1015 Lines Gp-Pilot -Third Pedal, Straight Travel
| 11***45 | Guard | 2 |
| 13***46 | Hose As | 1 |
| 19***89 | Hose As | 1 |
266-1016 Lines Gp-Pilot -4-Way Pattern
| 08***55 | Valve Group-Pilot; -Control Pattern Change | 1 |
| 08***84 | Hose As. | 3 |
| 10***84 | Guard | 1 |
255-1663 Lines Gp-Pilot -Pedal Controls
| 08***56 | 90 Degrees Elbow | 1 |
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
255-1802 Lines Gp-Pilot -Pedal Controls
| 08***02 | Hose As. | 2 |
| 08***85 | Hose As (Nom 06, L=350mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
266-1024 Lines Gp-Pilot -Stick Lowering Control Valve
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***28 | Tee As-Orfs | 1 |
266-1025 Lines Gp-Pilot -Heavy Lift
| 08***72 | Hose As (Nom 06, L=1000mm) | 1 |
| 12***03 | Valve Group-Solenoid; -Variable Adjustable Boom | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
260-8188 Lines Gp-Pilot -System 11, Combined Fn, Medium Pressure
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***03 | Hose As (Nom 06, L=2300mm) | 1 |
| 08***73 | Hose As (Nom 06, L=1050mm) | 1 |
266-1006 Lines Gp-Pilot -Combined Function
| 08***56 | 90 Degrees Elbow | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***58 | Hose As (Nom 06, L=550mm) | 1 |
266-1007 Lines Gp-Pilot -Medium Flow
| 08***56 | 90 Degrees Elbow | 1 |
| 10***84 | Guard | 1 |
| 10***03 | Guard | 2 |
266-1011 Lines Gp-Pilot -Supply
| 10***84 | Guard | 1 |
| 10***03 | Guard | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
260-8176 Lines Gp-Pilot -Control Valve, Pump
| 08***56 | 90 Degrees Elbow | 1 |
| 08***41 | Hose As. | 2 |
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
266-1009 Lines Gp-Pump -Auxiliary
| 14***52 | Elbow As. | 1 |
| 14***56 | Elbow As | 1 |
| 14***29 | Tee As-Orfs | 1 |
260-8173 Lines Gp-Pump
| 10***03 | Bolt-Socket Head; (M16x2x35-mm) | 4 |
| 11***01 | Bolt-Socket Head; (M12x1.75x25-mm) | 8 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
266-1019 Lines Gp-Return -Boom Lowering Control
| 11***12 | Hose As | 1 |
| 14***52 | Elbow As. | 1 |
| 14***31 | Tee Group | 1 |
266-1023 Lines Gp-Sensor -Overload Warning Device
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
| 17***96 | Receptacle As | 1 |
262-3471 Lines Gp-Stick Cylinder -Stick Lowering Control
| 09***94 | Clamp, Double | 2 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
| 11***25 | Support As | 2 |
242-6735 Lines Gp-Stick Cylinder
| 09***00 | Seal-O-Ring (Id=33.70mm) | 1 |
| 09***80 | Holder | 1 |
| 12***19 | Support As | 1 |
266-8024 Lines Gp-Stick Cylinder
| 09***80 | Holder | 1 |
| 12***19 | Support As | 1 |
| 12***20 | Support | 1 |
247-8894 Lines Gp-Swing Motor
| 15***85 | Valve Group-Swing Cushion; (Fine Swing) | 1 |
| 24***94 | Lines Group-Swing Motor | 1 |
239-1716 Lines Gp-Travel Motor
| 10***18 | Grommet | 4 |
| 11***52 | Hose As | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
239-1717 Lines Gp-Travel Motor -Long Undercarriage
| 10***18 | Grommet | 4 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 14***72 | Elbow Group | 1 |
239-8697 Manifold Gp-Control -Pilot Oil Supply
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
239-8998 Manifold Gp-Control -Pilot Oil Supply
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
215-5037 Manifold Gp-Control -Pilot Oil Supply
| 21***37 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
158-8985 Motor & Mtg Gp-Swing
| 15***85 | Motor & Mtg Group-Swing | 1 |
| 15***86 | Motor Group-Swing | 1 |
| 6V***00 | Ring; (Retaining) (M35x1.5mm) | 1 |
107-7028 Motor & Mtg Gp-Travel
| 09***07 | Bolt; (M16x2x120-mm) | 3 |
| 09***85 | Seal - O-Ring (179.3 mm Id) | 1 |
| 10***28 | Motor & Mtg Group-Travel | 1 |
114-0484 Motor Gp-Travel
| 09***07 | Bolt; (M16x2x120-mm) | 3 |
| 09***85 | Seal - O-Ring (179.3 mm Id) | 1 |
| 11***84 | Motor & Mtg Group-Travel | 1 |
209-5992 Motor Gp-Piston -Travel
| 08***42 | Valve | 1 |
| 08***43 | Stopper | 2 |
| 08***57 | Piston | 2 |
209-5994 Motor Gp-Piston -Travel
| 08***43 | Stopper | 2 |
| 08***86 | Adapter | 1 |
| 09***99 | Ring - Retaining | 1 |
191-5542 Motor Gp-Swing
| 09***00 | Plug | 2 |
| 09***82 | Pin-Spring | 2 |
| 09***95 | Seal-O-Ring (Id=27.70mm) | 2 |
158-8986 Motor Gp-Swing
| 15***86 | Motor Group-Swing | 1 |
| 17***52 | Valve Group-Relief | 2 |
| 19***42 | Motor Group-Swing; -Swing | 1 |
215-9952 Motor Gp-Travel
| 08***42 | Valve | 1 |
| 08***43 | Stopper | 2 |
| 08***57 | Piston | 2 |
234-4630 Motor Gp-Travel
| 08***43 | Stopper | 2 |
| 08***86 | Adapter | 1 |
| 09***99 | Ring - Retaining | 1 |
248-9663 Mounting Gp-Main Control Valve
165-9473 Plug Gp-Control Valve
| 16***73 | Plug Group-Control Valve; -Auxiliary | 1 |
| 16***74 | Plug | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
6e-4816 Plug Gp-Control Valve
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***48 | Plug Group-Control Valve | 1 |
204-2747 Pump & Mtg Gp-Auxiliary
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 2 |
| 20***27 | Coupling | 1 |
| 20***47 | Pump & Mtg Group-Auxiliary | 1 |
239-6552 Pump & Mtg Gp-Main Hydraulic
| 16***77 | Coupling Group-Pump | 1 |
| 23***52 | Pump & Mtg Group-Main Hydraulic | 1 |
| 27***55 | Pump Group-Main Hydraulic; -Double | 1 |
240-2998 Pump Gp-Gear -Auxiliary
| 20***00 | Kit; (Seal) (Gear Pump) (Includes Lip Seal, Retaining Ring, 2 Strips, & 4 Gaskets) | 1 |
| 24***98 | Pump Group-Gear; -Auxiliary Hydraulic-Auxiliary | 1 |
| 3G***83 | Seal; (Lip Type) | 1 |
272-6955 Pump Gp-Main Hydraulic -Double
| 09***75 | Pin, Roller | 7 |
| 09***82 | Plug, Tapered | 16 |
| 09***46 | Ring; (Retaining) | 2 |
266-8036 Screen Gp-Hydraulic -Oil
| 08***17 | Rod | 1 |
| 09***39 | Spring | 1 |
| 21***48 | Screen As; (Hydraulic) | 1 |
297-0544 Spool Ar-Control Valve
| 29***44 | Spool Ar-Control Valve | 1 |
| 29***45 | Spool Group-Control Valve; -Stick Ii | 1 |
| 29***47 | Spool Group-Control Valve; -Bucket | 1 |
297-0551 Spool Gp-Control Valve -Travel
| 10***96 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***51 | Spool Group-Control Valve; -Travel | 1 |
297-0547 Spool Gp-Control Valve -Bucket
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***47 | Spool Group-Control Valve; -Bucket | 1 |
297-0553 Spool Gp-Control Valve -Swing
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***53 | Spool Group-Control Valve; -Swing | 1 |
297-0549 Spool Gp-Control Valve -Auxiliary
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***49 | Spool Group-Control Valve; -Auxiliary | 1 |
297-0545 Spool Gp-Control Valve -Stick Ii
| 10***94 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***45 | Spool Group-Control Valve; -Stick Ii | 1 |
297-0555 Spool Gp-Control Valve -Boom Ii
| 10***94 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***55 | Spool Group-Control Valve; -Boom Ii | 1 |
234-4440 Swivel Gp
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 15***82 | Seal | 5 |
248-9660 Tank & Filter Gp-Hydraulic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***30 | Seal-O-Ring (Id=179.30mm) | 1 |
248-9659 Tank & Mtg Gp-Hydraulic
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 24***59 | Tank & Mtg Group-Hydraulic | 1 |
| 24***60 | Tank & Filter Group-Hydraulic | 1 |
288-7432 Tube Gp-Hydraulic
| 28***32 | Tube Group-Hydraulic | 1 |
| 28***33 | Tube Group-Hydraulic; -1-Piece | 1 |
| 28***34 | Tube Group-Hydraulic; -2-Piece | 1 |
288-7431 Tube Gp-Hydraulic -2-Piece
| 14***57 | Elbow As. | 1 |
| 26***26 | Tube As | 1 |
| 26***27 | Tube As | 1 |
288-7430 Tube Gp-Hydraulic -1-Piece
| 14***52 | Elbow As. | 1 |
| 26***19 | Tube As | 1 |
| 28***30 | Tube Group-Hydraulic; -1-Piece | 1 |
288-7433 Tube Gp-Hydraulic -1-Piece
| 14***52 | Elbow As. | 1 |
| 26***22 | Tube As | 1 |
| 28***33 | Tube Group-Hydraulic; -1-Piece | 1 |
288-7429 Tube Gp-Hydraulic
| 28***29 | Tube Group-Hydraulic | 1 |
| 28***30 | Tube Group-Hydraulic; -1-Piece | 1 |
| 28***31 | Tube Group-Hydraulic; -2-Piece | 1 |
288-7434 Tube Gp-Hydraulic -2-Piece
| 14***57 | Elbow As. | 1 |
| 26***28 | Tube As | 1 |
| 26***29 | Tube As | 1 |
255-5713 Valve & Mtg Gp-Control -Auxiliary
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***13 | Valve & Mtg Group-Control; -Auxiliary | 1 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
255-5716 Valve & Mtg Gp-Control -Auxiliary
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 24***19 | Valve Group-Control; -Medium Flow | 1 |
| 25***16 | Valve & Mtg Group-Control; -Auxiliary | 1 |
259-7639 Valve Ar-Alt Pattern Control -4-Way Pattern
| 24***92 | Film Group; -Alt Pattern Control, Warning | 1 |
| 25***39 | Valve Ar-Alt Pattern Control; -4-Way Pattern | 1 |
| 26***16 | Lines Group-Pilot; -4-Way Pattern | 1 |
259-7640 Valve Ar-Alt Pattern Control
| 24***90 | Film Group; -Alt Pattern Control, Warning | 1 |
| 25***40 | Valve Ar-Alt Pattern Control | 1 |
| 26***17 | Lines Group-Pilot; -2-Way | 1 |
239-8971 Valve Ar-Check & Relief -Stick Lowering Control
| 23***71 | Valve Ar-Check & Relief; -Stick Lowering Control | 1 |
| 24***41 | Lines Group-Boom; -Stick Lowering Control Valve | 1 |
| 26***71 | Lines Group-Stick Cylinder; -Stick Lowering Control | 1 |
239-8969 Valve Ar-Load Control -Boom
| 23***69 | Valve Ar-Load Control; -Boom | 1 |
| 26***18 | Lines Group-Boom Cylinder; -Lowering Control | 1 |
| 26***19 | Lines Group-Return; -Boom Lowering Control | 1 |
264-8485 Valve Ar-Swing -Without Fine Swing
| 24***94 | Lines Group-Swing Motor | 1 |
| 26***85 | Valve Ar-Swing; -Without Fine Swing | 1 |
297-0370 Valve Gp-Check -1-Way/2-Way Flow
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
215-4890 Valve Gp-Check -1-Way/2-Way, Check
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
| 09***00 | Seal - O-Ring (34.40 mm Id) | 1 |
259-7662 Valve Gp-Control -Lh
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
137-3725 Valve Gp-Control
| 11***58 | Body; (Valve) | 1 |
| 13***51 | Spool As | 1 |
| 13***25 | Valve Group-Control; -Travel Counterbalance | 1 |
259-7632 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
244-8419 Valve Gp-Control -Medium Flow
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
259-7631 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 3 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
259-7465 Valve Gp-Control -Front-Rh
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
259-7466 Valve Gp-Control -Lh
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
259-7378 Valve Gp-Control -Auxiliary
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
244-8400 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 24***00 | Valve Group-Control; -Without Covers, Housings | 1 |
285-1531 Valve Gp-Control
| 26***03 | Valve Group-Relief; (160-Bar) (2321-Psi) | 2 |
| 28***31 | Valve Group-Control; -Medium Pressure | 1 |
| 28***77 | Valve Group-Relief; (230-Bar) (3336-Psi) | 2 |
232-4103 Valve Gp-Control -Medium Pressure
| 23***03 | Valve Group-Control; -Medium Pressure | 1 |
| 25***00 | Valve Group-Relief; -Medium Pressure | 2 |
| 25***01 | Valve Group-Relief; -Cushion, Rotator Motor | 2 |
185-0490 Valve Gp-Flow Control & Relief
| 09***73 | Screw-Machine; (M4x0.7x25-mm) | 2 |
| 12***23 | Flange-Tube | 1 |
| 16***97 | Valve Group-Flow Control; (Medium Pressure) | 1 |
225-4843 Valve Gp-Load Control -Stick Cylinder
| 09***94 | Seal-O-Ring (Id=25.70mm) | 2 |
| 09***89 | Ring, Back-Up | 2 |
| 12***97 | Ring | 2 |
225-4785 Valve Gp-Load Control -Boom Cylinder
| 09***94 | Seal-O-Ring (Id=25.70mm) | 2 |
| 09***89 | Ring, Back-Up | 2 |
| 12***97 | Ring | 2 |
255-5683 Valve Gp-Load Control -Boom Drift Red, Line Relief
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
255-5680 Valve Gp-Load Control -Stick Drift Red, Line Relief
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
259-7464 Valve Gp-Main Control
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***64 | Valve Group-Main Control; (Main Control) | 1 |
259-7602 Valve Gp-Main Control -Heavy Lift
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***65 | Valve Group-Control; -Front-Rh | 1 |
197-2247 Valve Gp-Manual
| 09***83 | Ring-Back Up | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***47 | Handle | 1 |
277-0954 Valve Gp-Manual -Auxiliary, Shutoff
| 27***54 | Valve Group-Manual; -Auxiliary, Shutoff-Stick, High Pressure | 1 |
| 30***66 | Handle | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
173-7992 Valve Gp-Manual
| 17***92 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 19***47 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 19***48 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
197-2248 Valve Gp-Manual
| 11***53 | Handle | 1 |
| 19***48 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
225-4813 Valve Gp-Pilot -Joystick, Rh
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
270-5947 Valve Gp-Pilot -Travel
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 08***09 | Bellows | 2 |
085-6455 Valve Gp-Pilot
| 08***55 | Valve Group-Pilot; -Control Pattern Change | 1 |
| 08***75 | Cover | 1 |
| 08***76 | Cover | 1 |
206-3305 Valve Gp-Pilot -Joystick
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
297-0531 Valve Gp-Pilot -Joystick, Lh
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
118-5984 Valve Gp-Pilot -Alt Pattern Control, 2-Way
| 11***83 | Seal-Rubber | 1 |
| 11***84 | Valve Group-Pilot; -Alt Pattern Control, 2-Way | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 4 |
297-0529 Valve Gp-Pilot -Joystick
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
310-0414 Valve Gp-Pilot -Travel
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 2 |
297-0530 Valve Gp-Pilot -Joystick, Rh
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
285-1327 Valve Gp-Pilot -Joystick
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
158-8250 Valve Gp-Pilot -Travel
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
285-1765 Valve Gp-Pilot -Alt Pattern Control, 2-Way
| 11***83 | Seal-Rubber | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 4 |
| 28***64 | Bolt-Wing | 1 |
232-4100 Valve Gp-Pilot -Joystick, Lh
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
201-9353 Valve Gp-Pilot Relief
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
232-4102 Valve Gp-Pressure Reducing -Boom, Swing Priority
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
153-5295 Valve Gp-Priority -Swing
| 10***89 | Seal-O-Ring | 2 |
| 10***73 | Seal-O-Ring | 2 |
| 14***74 | Valve | 1 |
173-3452 Valve Gp-Relief
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***65 | Ring-Back Up; (Backup) | 1 |
| 17***52 | Valve Group-Relief | 1 |
201-9352 Valve Gp-Relief
| 10***21 | Valve Group-Relief; (Pilot Relief) | 1 |
| 20***52 | Valve Group-Relief; -Heel | 1 |
| 20***53 | Valve Group-Pilot Relief; (Pilot Relief) | 1 |
177-2653 Valve Gp-Relief
| 17***53 | Valve Group-Relief; -With Block | 1 |
| 22***84 | Valve Group-Relief; -Work Tool | 1 |
153-5313 Valve Gp-Relief -Negative Flow Control
| 10***67 | Valve Group-Relief; -Negative Flow Control | 1 |
| 15***39 | Cover | 1 |
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
259-7600 Valve Gp-Relief -Medium Pressure
| 25***00 | Valve Group-Relief; -Medium Pressure | 1 |
222-0084 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
239-8774 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
255-5660 Valve Gp-Relief -Main
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
255-5661 Valve Gp-Relief -Line
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
259-7601 Valve Gp-Relief -Cushion, Rotator Motor
| 25***01 | Valve Group-Relief; -Cushion, Rotator Motor | 1 |
109-5152 Valve Gp-Relief -Negative Flow Control
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
109-2667 Valve Gp-Relief
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 10***65 | Body-Valve | 1 |
129-8030 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 3 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***85 | Ring; (Back Up) | 3 |
173-3536 Valve Gp-Relief -Cushion Crossover
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***85 | Ring; (Back Up) | 1 |
| 17***36 | Valve Group-Relief; -Cushion Crossover | 1 |
255-5662 Valve Gp-Relief -Line
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
105-1321 Valve Gp-Pilot Relief
| 03***67 | Ring; (Back Up) | 1 |
| 03***36 | Seal-O-Ring | 2 |
| 10***21 | Valve Group-Relief; (Pilot Relief) | 1 |
123-2430 Valve Gp-Shuttle
| 12***30 | Valve Group-Shuttle; (Work Tool) | 1 |
| 12***31 | Body-Valve | 1 |
| 12***52 | Connector | 2 |
185-0462 Valve Gp-Shuttle -Pilot
| 09***78 | Seal-O-Ring (Id=9.80mm) | 7 |
| 10***79 | Plug | 7 |
| 16***64 | Seat | 6 |
112-0083 Valve Gp-Shuttle
| 11***83 | Valve Group-Shuttle; -Third Pedal, Straight Travel | 1 |
| 11***85 | Plug | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 4 |
171-0198 Valve Gp-Shuttle
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 17***98 | Valve Group-Shuttle | 1 |
| 18***07 | Kit-Seal; (Shuttle Valve) | 1 |
285-1534 Valve Gp-Shuttle
| 12***31 | Body-Valve | 1 |
| 25***33 | Connector | 2 |
| 28***34 | Valve Group-Shuttle | 1 |
116-3526 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
165-9549 Valve Gp-Solenoid
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 16***49 | Valve Group-Solenoid | 1 |
| 7I***84 | Plug | 4 |
121-1491 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
259-7430 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 2 |
| 25***30 | Valve Group-Solenoid; -Pressure Reducing | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 4 |
259-7429 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 4 |
| 25***29 | Valve Group-Solenoid; -4-Function | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 8 |
121-6303 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
111-9916 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
171-0188 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 17***88 | Valve Group-Solenoid; -Neg Flow Cont, Propn Red Valve | 1 |
| 17***98 | Valve Group-Shuttle | 2 |
328-2035 Valve Gp-Solenoid & Manifold -Quick Coupler
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
260-3877 Valve Gp-Solenoid & Manifold -Quick Coupler
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
244-8507 Valve Gp-Solenoid & Relief
| 08***38 | Seal-O-Ring | 1 |
| 10***17 | Spring | 1 |
| 10***18 | Ring; (Backup) | 1 |
323-7559 Valve Gp-Solenoid & Relief
| 08***38 | Seal-O-Ring | 1 |
| 10***41 | Ring; (Retaining) | 1 |
| 10***17 | Spring | 1 |
244-8506 Valve Gp-Solenoid & Relief -1-Way/2-Way Flow
| 16***27 | Block | 1 |
| 24***06 | Valve Group-Solenoid & Relief; -Line Relief, Work Tool | 1 |
| 24***07 | Valve Group-Solenoid & Relief; -1-Way, 2-Way Flow | 1 |
323-7558 Valve Gp-Solenoid & Relief -With Block
| 32***58 | Valve Group-Solenoid & Relief; -With Block | 1 |
| 32***59 | Valve Group-Solenoid & Relief | 1 |
158-9085 Valve Gp-Swing Cushion
| 09***76 | Seal-O-Ring | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
| 15***85 | Valve Group-Swing Cushion; (Fine Swing) | 1 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 09***76 | Seal-O-Ring | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
137-3718 Valve Gp-Travel Counterbalance
| 09***01 | Seal-O-Ring (Id=39.40mm) | 2 |
| 11***60 | Cover | 2 |
| 11***62 | Spring | 2 |
Implements
247-7351 Boom Ar-1 Piece Long -High Ambient
| 24***86 | Lines Group-Grease; -Boom | 1 |
| 24***45 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 24***47 | Cylinder & Lines Group-Stick | 1 |
247-7349 Boom Ar-1 Piece Long
| 24***86 | Lines Group-Grease; -Boom | 1 |
| 24***30 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 24***33 | Cylinder & Lines Group-Stick | 1 |
247-7352 Boom Ar-1 Piece Long -Heavy-Duty, High Ambient Temperature
| 24***86 | Lines Group-Grease; -Boom | 1 |
| 24***45 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 24***47 | Cylinder & Lines Group-Stick | 1 |
247-7350 Boom Ar-1 Piece Long -Heavy-Duty
| 24***86 | Lines Group-Grease; -Boom | 1 |
| 24***30 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 24***36 | Cylinder & Lines Group-Boom; -Rh | 1 |
251-2507 Boom Gp
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
251-2510 Boom Gp
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
244-8503 Conversion Gp-Linkage
| 24***03 | Conversion Group-Linkage; -B1-Family | 1 |
| 24***04 | Pin As | 2 |
| 7X***52 | Bolt-Plt; (M16 X 2.0 X 30) | 2 |
267-0138 Lines Gp-Grease -Stick
| 08***38 | Plate As | 2 |
| 26***38 | Lines Group-Grease; -Stick | 1 |
| 26***39 | Tube As | 1 |
241-7286 Lines Gp-Grease -Boom
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 12***26 | Hose As | 1 |
| 16***79 | Clip | 3 |
240-3858 Linkage Ar-Bucket -B1-Family, With Lifting Eye
| 24***58 | Linkage Ar-Bucket; -B1-Family, With Lifting Eye | 1 |
| 24***55 | Cylinder & Lines Group-Bucket | 1 |
| 26***88 | Linkage Group-Bucket; -B1-Family, With Lifting Eye | 1 |
240-3861 Linkage Ar-Bucket -B1-Family, With Lifting Eye
| 24***61 | Linkage Ar-Bucket; -B1-Family, With Lifting Eye | 1 |
| 24***58 | Cylinder & Lines Group-Bucket | 1 |
| 26***88 | Linkage Group-Bucket; -B1-Family, With Lifting Eye | 1 |
260-2288 Linkage Gp-Bucket -B1-Family, With Lifting Eye
| 08***05 | . Head; Cyl., Pin | 2 |
| 09***44 | Seal-O-Ring (Id=140.00mm) | 4 |
| 16***86 | Shim; (2-mm Thk) | 2 |
262-3497 Linkage Gp-Bucket -B1-Family, Quick Coupler
| 08***05 | . Head; Cyl., Pin | 2 |
| 09***44 | Seal-O-Ring (Id=140.00mm) | 4 |
| 16***86 | Shim; (2-mm Thk) | 2 |
177-8628 Pin Gp -Coupler
| 08***05 | . Head; Cyl., Pin | 2 |
| 17***28 | Pin Group; -Coupler | 1 |
| 23***66 | Bolt; (M16x2x195-mm) | 2 |
298-4127 Stick Ar -B1-Family
| 18***76 | Lines Group-Bucket Cylinder | 1 |
| 26***38 | Lines Group-Grease; -Stick | 1 |
| 29***27 | Stick Ar; -B1-Family | 1 |
240-3845 Stick Ar -Reach
| 18***76 | Lines Group-Bucket Cylinder | 1 |
| 24***45 | Stick Ar; -B-Family | 1 |
| 24***96 | Stick Group-Hoe; -B-Family | 1 |
240-3851 Stick Ar-Hoe -Reach
| 18***93 | Lines Group-Bucket Cylinder | 1 |
| 24***51 | Stick Ar-Hoe; -B1-Family, Heavy-Duty | 1 |
| 24***03 | Stick Group-Hoe; -Auxiliary, Coupler | 1 |
240-3849 Stick Ar-Hoe -Reach
| 18***93 | Lines Group-Bucket Cylinder | 1 |
| 24***49 | Stick Ar-Hoe; -Reach | 1 |
| 24***63 | Stick Group-Hoe; -Auxiliary, Coupler | 1 |
240-3882 Stick Ar-Hoe -Reach
| 24***82 | Stick Ar-Hoe; -Reach | 1 |
| 24***06 | Stick Group-Hoe | 1 |
| 26***11 | Lines Group-Bucket Cylinder | 1 |
240-3839 Stick Ar-Hoe -Reach
| 18***93 | Lines Group-Bucket Cylinder | 1 |
| 24***39 | Stick Ar-Hoe; -Reach | 1 |
| 24***00 | Stick Group-Hoe | 1 |
315-1040 Stick Gp-Hoe -B1-Family
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
241-7300 Stick Gp-Hoe
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
241-7296 Stick Gp-Hoe
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
241-7303 Stick Gp-Hoe -Auxiliary, Coupler
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
241-7306 Stick Gp-Hoe
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
242-6463 Stick Gp-Hoe
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
Lubrication System
178-6502 Breather Gp -Crankcase
| 09***72 | O-Ring, Breather | 1 |
| 15***34 | Clamp | 1 |
| 17***02 | Breather Group; -Crankcase | 1 |
212-8554 Filter Gp-Engine Oil
| 09***21 | Plug | 2 |
| 12***72 | Gasket | 1 |
| 12***79 | Gasket | 1 |
323-4762 Kit-High Speed Oil Change
| 11***27 | Fitting; (Quick Disconnect, Male) | 1 |
| 11***68 | Nut-Bulkhead; (1-7/8-12-Thd) | 1 |
| 11***66 | Fitting; (Quick Disconnect, Male) | 1 |
178-6524 Lines Gp-Engine Oil
| 09***38 | Washer, Spring | 4 |
| 17***24 | Lines Group-Engine Oil; (Engine Oil) | 1 |
| 17***63 | Strainer | 1 |
162-6185 Lines Gp-Engine Oil Drain
| 09***88 | Clamp; (Hose) | 1 |
| 09***61 | Strap; (Cable) | 1 |
| 16***85 | Lines Group-Engine Oil Drain | 1 |
5i-7770 Lines Gp-Turbocharger Oil
| 09***38 | Washer, Spring | 2 |
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 2A***22 | Gasket; (10.3x15.9x1 In)(Copper) | 2 |
Machine Arrangement
264-8490 Chassis Ar
| 17***07 | Control Group-Governor | 1 |
| 17***16 | Handrail Group | 1 |
| 17***17 | Mirror Group-Rear View | 1 |
247-7341 Chassis Ar
| 17***07 | Control Group-Governor | 1 |
| 17***16 | Handrail Group | 1 |
| 17***17 | Mirror Group-Rear View | 1 |
247-7340 Chassis Ar
| 17***07 | Control Group-Governor | 1 |
| 17***16 | Handrail Group | 1 |
| 17***17 | Mirror Group-Rear View | 1 |
264-8482 General Ar
| 22***61 | Electronics Group-Monitor | 1 |
| 22***73 | Power Train Ar | 1 |
| 22***98 | Electronics Group-Machine | 1 |
247-7337 General Ar
| 22***61 | Electronics Group-Monitor | 1 |
| 22***73 | Power Train Ar | 1 |
| 22***98 | Electronics Group-Machine | 1 |
247-7336 General Ar -Standard Undercarriage
| 22***61 | Electronics Group-Monitor | 1 |
| 22***73 | Power Train Ar | 1 |
| 22***98 | Electronics Group-Machine | 1 |
Operator Station
245-7889 Adjuster Gp-Seat -Upper Slide
| 24***89 | Adjuster Group-Seat; -Upper Slide | 1 |
| 24***97 | Plate | 8 |
| 24***99 | Screw-Button Head; (M8x1.25x30-mm) | 4 |
245-7896 Adjuster Gp-Seat -Lower Slide
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 24***86 | Plate | 2 |
| 24***96 | Adjuster Group-Seat; -Lower Slide | 1 |
235-9004 Air Conditioner & Mounting Gp
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 23***73 | Harness As-Heater & Air Cond; (Control Panel Switches) | 1 |
235-9003 Air Conditioner Ar
| 22***82 | Duct Group-Cab Air | 1 |
| 23***03 | Air Conditioner Ar | 1 |
| 23***04 | Air Conditioner & Mounting Group | 1 |
240-5036 Air Conditioner Gp
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 24***36 | Air Conditioner Group | 1 |
316-8811 Air Conditioner Gp
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 24***17 | Motor As | 2 |
234-6606 Armrest Gp -Rh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***06 | Armrest Group; -Rh | 1 |
259-7347 Armrest Gp -Lh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
234-6607 Armrest Gp -Lh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***07 | Armrest Group; -Lh | 1 |
259-7346 Armrest Gp -Rh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***51 | Support As | 1 |
259-7295 Bracket Gp-Mirror
| 25***95 | Bracket Group-Mirror | 1 |
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
245-7890 Bracket Gp-Mounting -Suspension Seat
| 24***90 | Bracket Group-Mounting; -Suspension Seat | 1 |
| 24***97 | Plate | 4 |
| 24***99 | Screw-Button Head; (M8x1.25x30-mm) | 4 |
235-8917 Cab Gp -Interior
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 13 |
| 12***36 | Screw; (Truss Head) (M6x1.0x16mm) | 1 |
| 16***46 | Cup | 1 |
229-9109 Cab Gp
| 13***01 | Window Group-Cab; -Front, Upper | 1 |
| 17***03 | Window Group-Front | 1 |
| 17***58 | Window Group-Cab; -Front, Lower | 1 |
235-8910 Cab Gp -Exterior
| 08***52 | Washer | 2 |
| 09***23 | Screw-Machine; (M6x1x6-mm) | 3 |
| 09***07 | Washer-Hard; (10.2x30x3.2-mm Thk) | 2 |
229-9100 Cab Gp
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 16***74 | Louver As-Vent | 2 |
| 22***00 | Cab Group | 1 |
235-8908 Cab Gp -Interior
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 13 |
| 12***36 | Screw; (Truss Head) (M6x1.0x16mm) | 1 |
| 15***56 | Rail | 1 |
229-9108 Cab Gp
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 16***74 | Louver As-Vent | 2 |
| 22***08 | Cab Group | 1 |
229-9098 Cab Gp
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 16***74 | Louver As-Vent | 2 |
| 22***98 | Cab Group | 1 |
229-9101 Cab Gp
| 13***99 | Hatch Group; (Roof) | 1 |
| 13***01 | Window Group-Cab; -Front, Upper | 1 |
| 17***03 | Window Group-Front | 1 |
229-9099 Cab Gp
| 13***99 | Hatch Group; (Roof) | 1 |
| 13***01 | Window Group-Cab; -Front, Upper | 1 |
| 17***03 | Window Group-Front | 1 |
245-7836 Coil Gp-Evaporator
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
| 12***38 | Seal-O-Ring (Id=6.7mm); (Id=6.70mm) | 1 |
| 24***36 | Coil Group-Evaporator | 1 |
259-7244 Compressor Gp-Refrigerant
| 24***05 | Receptacle As-Connector; (2-Pin) | 1 |
| 25***44 | Compressor Group-Refrigerant | 1 |
| 25***86 | Coil As; (24-Volt) | 1 |
239-6507 Compressor Gp-Refrigerant
| 11***63 | Pulley | 1 |
| 20***88 | Spacer | 1 |
| 23***07 | Compressor Group-Refrigerant | 1 |
245-7802 Condenser & Mtg Gp-Refrigerant
| 24***49 | Condenser Group-Refrigerant | 1 |
| 24***02 | Condenser & Mtg Group-Refrigerant | 1 |
| 24***03 | Support As | 1 |
245-7749 Condenser Gp-Refrigerant
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 8 |
| 23***80 | Condenser As | 1 |
| 24***49 | Condenser Group-Refrigerant | 1 |
245-7924 Console Gp-Operator -Rh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
245-7922 Console Gp-Operator
| 10***66 | Spacer; (6.6x11x6-mm Thk) | 8 |
| 12***17 | Guard | 2 |
| 17***16 | Grommet | 2 |
259-7348 Console Gp-Operator -Rh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
259-7349 Console Gp-Operator -Lh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 23***79 | Nut-Speed | 6 |
245-7923 Console Gp-Operator -Lh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 17***30 | Ashtray | 1 |
270-5690 Control & Mtg Gp-Joystick -3-Button, Trigger Switch
| 27***66 | Control Group-Joystick; -Rh | 1 |
| 27***67 | Control Group-Joystick; -Lh | 1 |
| 27***90 | Control & Mtg Group-Joystick; -3-Button, Trigger Switch | 1 |
270-5688 Control & Mtg Gp-Joystick -3-Button, Trigger Switch
| 24***11 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 27***88 | Control & Mtg Group-Joystick; -Joystick, 3-Button, Trigger Sw | 1 |
310-0078 Control & Mtg Gp-Joystick
| 29***32 | Control Group-Joystick; -Rh | 1 |
| 29***33 | Control Group-Joystick; -Lh | 1 |
| 31***78 | Control & Mtg Group-Joystick | 1 |
259-7707 Control & Mtg Gp-Joystick
| 25***07 | Control & Mtg Group-Joystick | 1 |
| 27***51 | Control Group-Joystick; -Lh | 1 |
| 27***52 | Control Group-Joystick; -Rh | 1 |
239-8696 Control Gp-Foot -Work Tool
| 14***34 | Strip | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1A***21 | Grommet | 1 |
260-2128 Control Gp-Handle -Joystick, Lh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
235-8970 Control Gp-Handle -Joystick, Rh
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
| 12***10 | Lever | 1 |
260-2127 Control Gp-Handle -Joystick, Rh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
235-8969 Control Gp-Handle -Joystick, Lh
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
| 12***10 | Lever | 1 |
245-7846 Control Gp-Heat & Air Cond -Air Inlet
| 18***00 | Screw-Tapping | 4 |
| 19***66 | Relay; (Compressor Clutch) | 2 |
| 24***13 | Motor As | 1 |
259-7179 Control Gp-Hydraulic Pedal
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***73 | Pin | 1 |
| 13***74 | Pedal-Rubber | 1 |
239-8695 Control Gp-Hydraulic Pedal
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 4 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***11 | Pedal-Rubber; (Rh) | 1 |
239-8693 Control Gp-Hydraulic Pedal
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***11 | Pedal-Rubber; (Rh) | 1 |
| 12***73 | Pin | 1 |
232-4157 Control Gp-Joystick -Lh
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 23***57 | Control Group-Joystick; -Lh | 1 |
| 23***69 | Control Group-Handle; -Joystick, Lh | 1 |
270-5666 Control Gp-Joystick -Rh
| 22***13 | Valve Group-Pilot; -Joystick, Rh | 1 |
| 26***27 | Control Group-Handle; -Joystick, Rh | 1 |
| 27***66 | Control Group-Joystick; -Rh | 1 |
270-5951 Control Gp-Joystick -Lh
| 23***69 | Control Group-Handle; -Joystick, Lh | 1 |
| 27***51 | Control Group-Joystick; -Lh | 1 |
| 28***27 | Valve Group-Pilot; -Joystick | 1 |
270-5952 Control Gp-Joystick -Rh
| 23***70 | Control Group-Handle; -Joystick, Rh | 1 |
| 27***52 | Control Group-Joystick; -Rh | 1 |
| 28***27 | Valve Group-Pilot; -Joystick | 1 |
297-0532 Control Gp-Joystick -Rh
| 23***70 | Control Group-Handle; -Joystick, Rh | 1 |
| 29***29 | Valve Group-Pilot; -Joystick | 1 |
| 29***32 | Control Group-Joystick; -Rh | 1 |
270-5667 Control Gp-Joystick -Lh
| 23***00 | Valve Group-Pilot; -Joystick, Lh | 1 |
| 26***28 | Control Group-Handle; -Joystick, Lh | 1 |
| 27***67 | Control Group-Joystick; -Lh | 1 |
297-0533 Control Gp-Joystick -Lh
| 23***69 | Control Group-Handle; -Joystick, Lh | 1 |
| 29***29 | Valve Group-Pilot; -Joystick | 1 |
| 29***33 | Control Group-Joystick; -Lh | 1 |
232-4158 Control Gp-Joystick -Rh
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 23***58 | Control Group-Joystick; -Rh | 1 |
| 23***70 | Control Group-Handle; -Joystick, Rh | 1 |
170-9497 Control Gp-Pilot Operated Hyd -Travel
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
234-6501 Cover Gp-Cab -Rear
| 23***99 | Cover As | 1 |
| 23***01 | Cover Group-Access; -Cab, Rear | 1 |
| 23***02 | Cover-Access; (Fuse-Rear Panel) | 1 |
234-6500 Cover Gp-Storage
| 23***00 | Cover Group-Storage; -Cab, Rear | 1 |
189-2768 Door & Mtg Gp-Cab
| 13***00 | Door Group-Cab | 1 |
| 15***67 | Door As | 1 |
| 15***77 | Hinge | 2 |
176-1964 Door Gp-Cab
| 09***72 | Nut | 2 |
| 09***22 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 10***99 | Screw As; (M6x1x16-mm) | 1 |
139-7100 Door Gp-Cab
| 09***22 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 10***99 | Screw As; (M6x1x16-mm) | 2 |
| 10***00 | Screw As; (M6x1x20-mm) | 2 |
189-2793 Door Gp-Cab
| 15***77 | Hinge | 2 |
| 17***64 | Door Group; (Cab) | 1 |
| 18***93 | Door Group-Cab | 1 |
229-9082 Duct Gp-Cab Air
| 10***99 | Screw As; (M6x1x16-mm) | 2 |
| 17***96 | Clip | 5 |
| 22***82 | Duct Group-Cab Air | 1 |
305-0326 Floor Mat
| 30***26 | Floor Mat | 1 |
245-7794 Floor Mat
| 24***94 | Floor Mat | 1 |
245-7795 Floor Mat
| 24***95 | Floor Mat | 1 |
245-7796 Floor Mat
| 24***96 | Floor Mat | 1 |
240-5073 Floor Mat
| 24***73 | Floor Mat | 1 |
240-5071 Floor Mat
| 24***71 | Floor Mat | 1 |
178-5549 Guard Ar-Overhead -Fog
| 16***97 | Guard Group-Overhead | 1 |
| 17***85 | Guard Group-Front Window | 1 |
| 17***49 | Guard Ar-Overhead; -Falling Objects Guard System | 1 |
164-0535 Guard Gp-Front Window -Lower
| 16***35 | Guard Group-Front Window; -Lower | 1 |
| 16***55 | Frame As | 1 |
| 4I***02 | Boss; (M12x1.75x20-mm) | 4 |
164-0534 Guard Gp-Front Window -Full
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 16***34 | Guard Group-Front Window; -Full | 1 |
| 17***28 | Bracket As | 2 |
171-7485 Guard Gp-Front Window
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 17***85 | Guard Group-Front Window | 1 |
| 17***25 | Spring As-Gas | 2 |
164-0497 Guard Gp-Overhead
| 09***65 | Spacer; (17x40x3-mm Thk) | 3 |
| 16***97 | Guard Group-Overhead | 1 |
| 16***41 | Guard As | 1 |
139-7099 Hatch Gp-Roof
| 09***06 | Spring As; (Gas) | 2 |
| 10***69 | Bolt As; (M8x1.25x16-mm) | 4 |
| 13***99 | Hatch Group; (Roof) | 1 |
189-2849 Hatch Gp-Roof
| 08***49 | Packing | 2 |
| 10***81 | Screw-Truss Head | 4 |
| 16***94 | Catch | 1 |
259-7350 Hatch Gp-Roof
| 09***06 | Spring As; (Gas) | 2 |
| 10***69 | Bolt As; (M8x1.25x16-mm) | 4 |
| 17***49 | Bracket As | 2 |
240-5060 Headrest As-Seat
| 24***60 | Headrest As-Seat | 1 |
229-9084 Heater & Mtg Gp-Cab
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 22***84 | Heater & Mtg Group-Cab | 1 |
245-7840 Heater Ar-Cab
| 22***82 | Duct Group-Cab Air | 1 |
| 22***84 | Heater & Mtg Group-Cab | 1 |
| 24***40 | Heater Ar-Cab | 1 |
267-8072 Horn Gp-Electric
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 11***68 | Bracket | 1 |
238-1540 Horn Gp-Electric
| 23***40 | Horn Group-Electric | 1 |
| 23***41 | Horn Group-Electric | 1 |
| 23***45 | Bracket As | 1 |
238-1541 Horn Gp-Electric
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 23***41 | Horn Group-Electric | 1 |
267-8071 Horn Gp-Electric
| 26***71 | Horn Group-Electric | 1 |
| 29***59 | Horn Group-Electric | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
291-7559 Horn Gp-Electric
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 13***89 | Clip; (Ladder) | 1 |
259-5253 Installation Gp-Radio
| 14***59 | Fuse; (5-Ampere) | 1 |
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
231-1768 Installation Gp-Radio
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
| 23***10 | Plug As-Connector; (6-Pin) | 1 |
316-8872 Kit-Console Adjustment
| 31***72 | Kit-Console Adjustment | 1 |
085-6444 Latch Gp-Front Window
| 08***44 | Latch Group-Front Window | 1 |
| 08***45 | Lock | 1 |
| 08***46 | Lock | 1 |
164-0528 Lever Gp-Cab Door
| 15***42 | Lever As | 1 |
| 16***28 | Lever Group-Cab Door | 1 |
| 16***64 | Bracket | 1 |
245-7801 Lines Gp-Air Conditioner
| 09***13 | Clip | 2 |
| 10***36 | Clip | 2 |
| 12***98 | Bracket Assem. | 1 |
245-7841 Lines Gp-Heater
| 09***13 | Clip | 2 |
| 12***05 | Joint | 2 |
| 13***89 | Clip; (Ladder) | 1 |
7y-0059 Literature Gp
| 09***45 | Cable; (Lanyard) | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
175-5617 Mirror Gp-Rear View
| 13***70 | Mirror | 1 |
| 15***42 | Bar Assem. | 1 |
| 17***17 | Mirror Group-Rear View | 1 |
221-8813 Monitor & Mtg Gp-Operator
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 32***82 | Monitor Group-Operator | 1 |
| 9X***46 | Screw-Truss Head (M6x1x35mm); (M6x1x35-mm) | 3 |
327-7482 Monitor Gp-Operator
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 17 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
| 24***95 | Receptacle As-Connector; (12-Pin) | 1 |
290-9467 Mounting Gp-Antenna -Product Link, Antenna
| 09***10 | Clamp | 3 |
| 09***72 | Grommet | 1 |
| 16***87 | Washer-Hard; (5.2x16x1.5-mm Thk) | 3 |
270-5541 Mounting Gp-Antenna -Product Link 121sr
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
245-7811 Mounting Gp-Platform
| 23***62 | Mount As | 4 |
| 24***11 | Mounting Group-Platform | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 16 |
259-7206 Operator Ar
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 22***78 | Platform Group-Operator | 1 |
259-7200 Pedal Ar-Auxiliary -Third Pedal, Straight Travel
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 25***43 | Lines Group-Pilot; -Third Pedal, Pilot Valve | 1 |
| 25***79 | Control Group-Hydraulic Pedal; -Third Pedal, Straight Travel | 1 |
229-9078 Platform Gp-Operator
| 13***65 | Grommet | 1 |
| 13***66 | Grommet | 1 |
| 16***17 | Strip | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
245-7881 Screen Gp-Sun
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 6 |
| 24***81 | Screen Group-Sun | 1 |
| 25***10 | Screen As; (Cab) | 1 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
240-4999 Seat & Mounting Gp -Low Back, Tilt
| 22***75 | Seat Group-Suspension; -Low Back, Tilt | 1 |
| 24***99 | Seat & Mounting Group; -Low Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
240-5039 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 24***39 | Seat Belt Group; -Retractable, 76-mm | 1 |
273-5446 Seat Belt Gp -Retractable, 46-Mm
| 27***46 | Seat Belt Group; -Retractable, 46-mm | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
240-5037 Seat Belt Gp -Retractable, 46-Mm
| 24***37 | Seat Belt Group; -Retractable, 46-mm | 1 |
| 27***46 | Seat Belt Group; -Retractable, 46-mm | 1 |
235-9020 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
235-9028 Seat Gp -Low Back, Tilt
| 22***76 | Seat Group; -Low Back, Tilt | 1 |
| 22***95 | Suspension Group-Seat; -Mechanical | 1 |
| 23***28 | Seat Group; -Low Back, Tilt | 1 |
240-5056 Seat Gp -Low Back, Tilt
| 24***56 | Seat Group; -Low Back, Tilt | 1 |
| 24***57 | Seat Group; -Low Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
240-5057 Seat Gp -Low Back, Tilt
| 22***95 | Suspension Group-Seat; -Mechanical | 1 |
| 24***57 | Seat Group; -Low Back, Tilt | 1 |
| 24***58 | Seat Group; -Low Back, Tilt | 1 |
240-5058 Seat Gp -Low Back, Tilt
| 24***58 | Seat Group; -Low Back, Tilt | 1 |
| 24***82 | Kit-Seat | 1 |
| 24***87 | Lever-Control | 1 |
229-9076 Seat Gp -Low Back, Tilt
| 22***76 | Seat Group; -Low Back, Tilt | 1 |
| 24***83 | Kit-Seat | 1 |
| 24***87 | Lever-Control | 1 |
229-9090 Seat Gp -High Back, Tilt
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
240-5001 Seat Gp -Low Back, Tilt
| 23***28 | Seat Group; -Low Back, Tilt | 1 |
| 24***01 | Seat Group; -Low Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
229-9075 Seat Gp-Suspension -Low Back, Tilt
| 22***75 | Seat Group-Suspension; -Low Back, Tilt | 1 |
| 22***76 | Seat Group; -Low Back, Tilt | 1 |
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
235-8856 Support Gp-Seat
| 23***56 | Support Group-Seat | 1 |
| 23***57 | Support As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
245-7891 Support Gp-Seat
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 24***91 | Support Group-Seat; -Mechanical | 1 |
| 24***97 | Plate | 8 |
229-9077 Suspension Gp-Seat -Mechanical
| 14***21 | Kit-Clip; (Seat) | 1 |
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 24***68 | Cover As | 1 |
229-9095 Suspension Gp-Seat
| 22***95 | Suspension Group-Seat; -Mechanical | 1 |
| 24***68 | Cover As | 1 |
| 24***89 | Adjuster Group-Seat; -Upper Slide | 1 |
245-7892 Suspension Gp-Seat -Mechanical
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***80 | Cylinder-Damper | 1 |
| 24***92 | Suspension Group-Seat; -Mechanical | 1 |
161-3751 Visor Gp-Cab
| 16***51 | Visor Group-Cab; -Sun Visor | 1 |
| 16***39 | Bracket As | 1 |
| 21***27 | Plate | 1 |
161-3750 Visor Gp-Protection -Rain
| 16***50 | Visor Group-Protection; -Rain | 1 |
| 16***18 | Bracket | 2 |
| 16***19 | Bracket | 1 |
229-9070 Washer Gp-Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 16***95 | Strap; (Cable) | 2 |
| 17***31 | Tank As-Window Washer | 1 |
229-9088 Washer Gp-Window -Lower
| 08***37 | Nozzle As | 1 |
| 10***26 | Adapter As | 1 |
| 10***27 | Packing | 1 |
207-0144 Window As-Front -Upper
| 15***70 | Handle | 1 |
| 15***72 | Glass | 1 |
| 16***98 | Seal | 1 |
139-7101 Window Gp-Cab -Front, Upper
| 09***23 | Screw-Machine; (M6x1x6-mm) | 2 |
| 10***00 | Screw As; (M6x1x20-mm) | 2 |
| 11***06 | Switch; (Window Lower Limit) | 1 |
176-1958 Window Gp-Cab -Front, Lower
| 13***19 | Ring | 2 |
| 15***73 | Glass; (Lower Front) | 1 |
| 15***31 | Stopper | 2 |
235-8909 Window Gp-Cab -Side, Rear
| 09***29 | Ring-Key | 1 |
| 15***90 | Glass; (Lh) | 1 |
| 15***69 | Glass | 1 |
156-6647 Window Gp-Cab -Front, Lower
| 12***66 | Stopper | 1 |
| 14***91 | Packing | 2 |
| 14***92 | Retainer | 2 |
235-8915 Window Gp-Cab -Side, Rear
| 09***29 | Ring-Key | 1 |
| 16***66 | Seal | 1 |
| 16***36 | Glass; (Lh) | 1 |
151-6792 Window Gp-Door
| 08***44 | Latch Group-Front Window | 2 |
| 09***39 | Rivet | 3 |
| 15***92 | Window Group-Door; (Door) | 1 |
171-7503 Window Gp-Front -Upper
| 10***00 | Screw As; (M6x1x20-mm) | 2 |
| 15***03 | Handle; (Pull) | 1 |
| 15***04 | Cap | 2 |
229-9087 Wiper & Washer Gp-Window -Lower
| 12***66 | Switch As-Roller | 1 |
| 15***46 | Bracket | 1 |
| 15***47 | Window Group-Cab; -Front, Lower | 1 |
245-7914 Wiper & Washer Gp-Window -Lower Front
| 16***79 | Motor As; (Window Wiper) (Lower) | 1 |
| 23***74 | Bracket As | 1 |
| 24***14 | Wiper & Washer Group-Window; -Lower Front | 1 |
245-7915 Wiper Ar-Window -Front
| 22***88 | Washer Group-Window; -Lower | 1 |
| 23***08 | Wiring Group-Window Wiper; -Lower | 1 |
| 24***14 | Wiper & Washer Group-Window; -Lower Front | 1 |
229-9086 Wiper Ar-Window
| 22***86 | Wiper Ar-Window; -Lower | 1 |
| 22***87 | Wiper & Washer Group-Window; -Lower | 1 |
| 22***88 | Washer Group-Window; -Lower | 1 |
234-6594 Wiper Gp-Window -Front, Upper
| 12***53 | Washer; (20.5x30x2-mm Thk) | 1 |
| 15***42 | Relay As; (Upper)(Wiper) | 1 |
| 16***68 | Arm As-Wiper | 1 |
Power Train
227-6035 Drive Gp-Final -Without Motor
| 09***80 | Plate (10.0 mm Thick) | 1 |
| 09***11 | Washer; (47.3x76x1-mm Thk) | 6 |
| 09***16 | Bearing As; (Roller) | 3 |
148-4696 Final Drive Gp -With Motor
| 10***28 | Motor & Mtg Group-Travel | 1 |
| 14***96 | Final Drive Group; -With Motor | 1 |
| 22***35 | Drive Group-Final; (Without Motor) | 1 |
227-6173 Power Train Ar
| 14***42 | Sprocket Group | 2 |
| 14***96 | Final Drive Group; -With Motor | 2 |
| 22***73 | Power Train Ar | 1 |
145-3042 Sprocket Gp
| 14***42 | Sprocket Group | 1 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 16 |
| 8E***05 | Sprocket-Track | 1 |
Service Equipment And Supplies
282-5705 Film Gp -Quick Coupler
| 26***30 | Film-Warning; (Crush Hazard, Read Omm, U.S.) | 1 |
| 26***31 | Film-Instruction; (Coupler Operation) | 1 |
| 26***72 | Film-Warning; (Crush Hazard, Read Omm, U.S.) | 1 |
247-7465 Film Gp -Hammer Control, Foot Switch
| 17***15 | Film-Instruction; (Hammer Control) | 1 |
| 24***65 | Film Group; -Hammer Control, Foot Switch | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
193-6788 Film Gp -Quick Coupler
| 19***88 | Film Group; -Coupler Operation | 1 |
| 26***30 | Film-Warning; (Crush Hazard, Read Omm, U.S.) | 1 |
| 26***31 | Film-Instruction; (Coupler Operation) | 1 |
247-7424 Film Gp -Operator Controls, Notice
| 24***24 | Film Group; -Operator Controls, Notice | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***46 | Film-Instruction; (Operator Control Pedals) | 1 |
247-7423 Film Gp -Operator Controls, Notice
| 24***23 | Film Group; -Operator Controls, Notice | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***45 | Film-Instruction; (Operator Control Pedals) | 1 |
247-7490 Film Gp -Alt Pattern Control, Warning
| 24***90 | Film Group; -Alt Pattern Control, Warning | 1 |
| 25***70 | Film-Instruction; (Alt Pattern Control, Read Omm) | 1 |
| 25***71 | Plate-Instruction; (Control Pattern, Read Omm) | 1 |
247-7492 Film Gp -Alt Pattern Control, Warning
| 17***88 | Film-Information; (Operator Controls, Read Omm)(Quick Changer) | 1 |
| 21***31 | Plate-Instruction; (Operator Controls, Read Omm)(Operator Controls) | 1 |
| 21***32 | Plate-Instruction; (Operator Controls, Read Omm)(Kobelco, Sae Patterns) | 1 |
247-7411 Film Gp -Operator Controls, Notice
| 24***11 | Film Group; -Operator Controls, Notice | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***42 | Film-Information; (Operator Controls, Read Omm) | 1 |
247-7344 Plate & Film Gp
| 10***45 | Film-Identification; (Cat) | 2 |
| 12***07 | Film-Instruction; (On Radiator Filler Cap) | 2 |
| 13***46 | Film-Stripe; (Red)(700-cm) | 0 |
247-7345 Plate & Film Gp
| 10***45 | Film-Identification; (Cat) | 2 |
| 13***46 | Film-Stripe; (Red)(700-cm) | 0 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
264-8588 Plate & Film Gp
| 24***45 | Plate & Film Group | 1 |
| 26***88 | Plate & Film Group | 1 |
Undercarriage
264-8481 Frame Ar-Undercarriage
| 08***08 | Guard Group-Track Guide; -Center | 2 |
| 16***54 | Guard Group-Travel Motor; (Travel Motor) | 1 |
| 23***41 | Frame As-Undercarriage | 1 |
264-8480 Frame Ar-Undercarriage
| 08***08 | Guard Group-Track Guide; -Center | 2 |
| 16***54 | Guard Group-Travel Motor; (Travel Motor) | 1 |
| 23***40 | Frame As-Undercarriage | 1 |
236-8340 Frame As-Undercarriage
| 11***40 | Bracket | 2 |
| 23***20 | Step | 2 |
| 23***40 | Frame As-Undercarriage | 1 |
120-7167 Guard Gp-Track Guide -Rear
| 12***67 | Guard Group-Track Guide; -Sprocket | 1 |
| 21***69 | Guard As-Track Guide | 2 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 16 |
120-7165 Guard Gp-Track Guide -Full Length
| 12***65 | Guard Group-Track Guide; -Full Length | 1 |
| 21***68 | Guard As-Track Guide | 4 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 24 |
087-5908 Guard Gp-Track Guide -Center
| 08***08 | Guard Group-Track Guide; -Center | 1 |
| 24***88 | Guard As-Track Guide | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 4 |
120-7168 Guard Gp-Track Guide -Full Length
| 12***68 | Guard Group-Track Guide; -Full Length | 1 |
| 21***69 | Guard As-Track Guide | 4 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 32 |
120-7164 Guard Gp-Track Guide -Rear
| 12***64 | Guard Group-Track Guide; -Rear | 1 |
| 21***68 | Guard As-Track Guide | 2 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 12 |
163-3754 Guard Gp-Travel Motor
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 8 |
| 16***54 | Guard Group-Travel Motor; (Travel Motor) | 1 |
| 16***55 | Cover | 2 |
248-7143 Idler Gp-Front
| 09***55 | Ring-Toric | 2 |
| 23***62 | Bearing; (Front Idler) | 2 |
| 24***25 | Shaft | 1 |
239-4341 Idler Gp-Front
| 23***41 | Idler Group-Front; (Front) (A) | 1 |
| 23***85 | Idler Group-Front; -Rh | 1 |
| 23***86 | Idler Group-Front; -Lh | 1 |
239-4386 Idler Gp-Front -Lh
| 23***86 | Idler Group-Front; -Lh | 1 |
| 23***88 | Track Adjuster & Recoil Group; -Lh | 1 |
| 24***43 | Idler Group-Front; (Front) | 1 |
239-4385 Idler Gp-Front -Rh
| 23***85 | Idler Group-Front; -Rh | 1 |
| 23***87 | Track Adjuster & Recoil Group; -Rh | 1 |
| 24***43 | Idler Group-Front; (Front) | 1 |
194-1609 Link As-Track
| 09***63 | Pin; (Cotter) | 1 |
| 15***80 | Seal; (Track) | 88 |
| 15***81 | Seal; (Track Master) | 2 |
194-1608 Link As-Track
| 09***63 | Pin; (Cotter) | 1 |
| 15***80 | Seal; (Track) | 96 |
| 15***81 | Seal; (Track Master) | 2 |
7y-1607 Roller Ar-Track & Carrier
| 16***43 | Roller Group-Track-Single Flange; (Track) (Single Flange) | 14 |
| 7X***65 | Bolt; (M20x2.5x100-mm) | 56 |
| 7Y***07 | Roller Ar-Track & Carrier | 1 |
7y-1608 Roller Ar-Track & Carrier
| 16***43 | Roller Group-Track-Single Flange; (Track) (Single Flange) | 16 |
| 7X***65 | Bolt; (M20x2.5x100-mm) | 64 |
| 7Y***08 | Roller Ar-Track & Carrier | 1 |
8e-5600 Roller Gp-Track Carrier
| 6V***61 | Seal; (Id=69.40mm) | 1 |
| 7H***71 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 8E***00 | Roller Group-Track Carrier; (Track Carrier) | 1 |
163-4143 Roller Gp-Track-Single Flange
| 16***43 | Roller Group-Track-Single Flange; (Track) (Single Flange) | 1 |
| 3E***17 | Dowel | 1 |
| 5G***47 | Stopper; (Rubber) | 1 |
239-4390 Track Adjuster & Recoil Gp
| 09***36 | Seal-Lip Type | 1 |
| 09***12 | Ring, Back-Up | 2 |
| 09***04 | Seal-O-Ring; (Id=49.40mm) | 1 |
239-4388 Track Adjuster & Recoil Gp -Lh
| 16***61 | Plate As | 1 |
| 23***88 | Track Adjuster & Recoil Group; -Lh | 1 |
| 23***89 | Track Adjuster & Recoil Group | 1 |
239-4389 Track Adjuster & Recoil Gp
| 14***35 | Plate | 1 |
| 23***50 | Spring | 1 |
| 23***78 | Support | 1 |
239-4387 Track Adjuster & Recoil Gp -Rh
| 16***61 | Plate As | 1 |
| 23***87 | Track Adjuster & Recoil Group; -Rh | 1 |
| 23***89 | Track Adjuster & Recoil Group | 1 |
247-7382 Track Ar -2-Required
| 19***21 | Track Group; -2-Required | 1 |
| 23***64 | Step Group | 1 |
| 24***82 | Track Ar; -2-Required | 1 |
247-7346 Track Ar -2-Required
| 19***12 | Track Group; -2-Required | 1 |
| 23***64 | Step Group | 1 |
| 24***46 | Track Ar; -2-Required | 1 |
194-1917 Track Gp -2-Required
| 19***09 | Link As-Track; (Track) | 1 |
| 19***17 | Track Group; -2-Required | 1 |
| 6I***54 | Shoe-Track | 45 |
194-1910 Track Gp -2-Required
| 12***62 | Shoe; (Track) | 49 |
| 19***08 | Link As-Track; (Track) | 1 |
| 19***10 | Track Group; -2-Required | 1 |
194-1912 Track Gp -2-Required
| 19***08 | Link As-Track; (Track) | 1 |
| 19***12 | Track Group; -2-Required | 1 |
| 9W***61 | Nut - Track (M20x1.5-6g Thd) | 196 |
194-1911 Track Gp -2-Required
| 19***08 | Link As-Track; (Track) | 1 |
| 19***11 | Track Group; -2-Required | 1 |
| 6I***54 | Shoe-Track | 49 |
194-1915 Track Gp -2-Required
| 10***16 | Shoe; (Track) | 49 |
| 19***08 | Link As-Track; (Track) | 1 |
| 19***15 | Track Group; -2-Required | 1 |
194-1914 Track Gp -2-Required
| 10***15 | Shoe; (Track) | 49 |
| 19***08 | Link As-Track; (Track) | 1 |
| 19***14 | Track Group; -Greased, Lubricated Track | 1 |
194-1920 Track Gp -2-Required
| 12***62 | Shoe; (Track) | 45 |
| 19***09 | Link As-Track; (Track) | 1 |
| 19***20 | Track Group; -2-Required | 1 |
194-1921 Track Gp -2-Required
| 19***09 | Link As-Track; (Track) | 1 |
| 19***21 | Track Group; -2-Required | 1 |
| 9W***61 | Nut - Track (M20x1.5-6g Thd) | 180 |
Work Tools
250-6418 Adjuster Gp-Bucket -Cb-Family
| 08***74 | Pin | 1 |
| 08***75 | Shim (0.5mm Thick) | 4 |
| 08***76 | Shim (1.0mm Thick) | 6 |
7y-2219 Adjuster Gp-Bucket -B-Family
| 08***21 | Shim (0.5mm Thick) | 4 |
| 08***22 | Shim (1.0mm Thick) | 6 |
| 13***48 | Plate | 1 |
239-2687 Bucket & Adjuster Gp -Excavation, B-Family
| 23***87 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 23***88 | Bucket As-Excavation; -B-Family | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
239-2580 Bucket & Adjuster Gp -Excavation, B-Family
| 23***80 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 23***81 | Bucket As-Excavation; -B-Family | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
239-2574 Bucket & Adjuster Gp -Excavation, B-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 5 |
| 23***74 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 23***75 | Bucket As-Excavation | 1 |
239-2577 Bucket & Adjuster Gp -Excavation, B-Family
| 23***77 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 23***78 | Bucket As-Excavation; -B-Family | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
239-2565 Bucket & Adjuster Gp -Excavation, Cb-Family
| 23***65 | Bucket & Adjuster Group; -Excavation, Cb-Family | 1 |
| 25***15 | Bucket As-Excavation; -Cb-Family | 1 |
| 25***18 | Adjuster Group-Bucket; -Cb-Family | 1 |
239-2576 Bucket Ar-Excavation -B-Family
| 22***69 | Tip Group-General Purpose; -K-80 | 5 |
| 23***76 | Bucket Ar-Excavation; -B-Family | 1 |
| 23***77 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
239-2579 Bucket Ar-Excavation -B-Family
| 23***79 | Bucket Ar-Excavation; -B-Family | 1 |
| 23***80 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 7Y***29 | Sidecutter Group; -B-Family | 1 |
239-2573 Bucket Ar-General Purpose -B-Family
| 22***69 | Tip Group-General Purpose; -K-80 | 5 |
| 23***73 | Bucket Ar-General Purpose; -B-Family | 1 |
| 23***74 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
327-3688 Bucket Ar-Heavy Duty -Cb-Family
| 22***75 | Tip Group-Penetration Plus; -K-100 | 3 |
| 28***01 | Bucket Group-Heavy Duty; -Cb-Family | 1 |
| 32***88 | Bucket Ar-Heavy Duty; -Cb-Family | 1 |
291-2125 Bucket As-Ditch Cleaning -Cb-Family
| 23***23 | Edge | 1 |
| 29***25 | Bucket As-Ditch Cleaning; -Cb-Family | 1 |
| 29***48 | Plate-Wear | 2 |
290-6000 Bucket As-Ditch Cleaning -B-Family
| 23***23 | Edge | 1 |
| 29***97 | Plate-Wear | 2 |
| 29***00 | Bucket As-Ditch Cleaning; -B-Family | 1 |
239-2578 Bucket As-Excavation -B-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 5 |
| 23***78 | Bucket As-Excavation; -B-Family | 1 |
| 23***49 | Edge As | 1 |
239-2688 Bucket As-Excavation -B-Family
| 23***49 | Edge As | 1 |
| 23***88 | Bucket As-Excavation; -B-Family | 1 |
| 25***20 | Plate-Wear | 1 |
250-6415 Bucket As-Excavation -Cb-Family
| 23***33 | Plate-Wear | 2 |
| 25***15 | Bucket As-Excavation; -Cb-Family | 1 |
| 25***93 | Edge As | 1 |
239-2581 Bucket As-Excavation -B-Family
| 23***81 | Bucket As-Excavation; -B-Family | 1 |
| 25***77 | Edge As | 1 |
| 25***22 | Plate | 1 |
281-2102 Bucket As-Heavy Duty -Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 1 |
| 23***05 | Adapter-Tip; (K-100, 2-Strap, Rh) | 1 |
| 23***06 | Adapter-Tip; (K-100, 2-Strap, Lh) | 1 |
287-6236 Bucket As-Heavy Duty -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 23***95 | Adapter-Tip; (K-90, 2-Strap, Rh) | 1 |
| 23***96 | Adapter-Tip; (K-90, 2-Strap, Lh) | 1 |
287-6238 Bucket As-Heavy Duty -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 5 |
| 23***95 | Adapter-Tip; (K-90, 2-Strap, Rh) | 1 |
| 23***96 | Adapter-Tip; (K-90, 2-Strap, Lh) | 1 |
281-2104 Bucket As-Heavy Duty -Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 3 |
| 23***05 | Adapter-Tip; (K-100, 2-Strap, Rh) | 1 |
| 23***06 | Adapter-Tip; (K-100, 2-Strap, Lh) | 1 |
287-6237 Bucket As-Heavy Duty -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 4 |
| 23***95 | Adapter-Tip; (K-90, 2-Strap, Rh) | 1 |
| 23***96 | Adapter-Tip; (K-90, 2-Strap, Lh) | 1 |
281-2108 Bucket As-Heavy Duty -Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 5 |
| 23***05 | Adapter-Tip; (K-100, 2-Strap, Rh) | 1 |
| 23***06 | Adapter-Tip; (K-100, 2-Strap, Lh) | 1 |
287-6233 Bucket As-Heavy Duty -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
| 23***95 | Adapter-Tip; (K-90, 2-Strap, Rh) | 1 |
| 23***96 | Adapter-Tip; (K-90, 2-Strap, Lh) | 1 |
287-6235 Bucket As-Heavy Duty -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 23***95 | Adapter-Tip; (K-90, 2-Strap, Rh) | 1 |
| 23***96 | Adapter-Tip; (K-90, 2-Strap, Lh) | 1 |
281-2105 Bucket As-Heavy Duty -Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 3 |
| 23***05 | Adapter-Tip; (K-100, 2-Strap, Rh) | 1 |
| 23***06 | Adapter-Tip; (K-100, 2-Strap, Lh) | 1 |
281-2103 Bucket As-Heavy Duty -Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 2 |
| 23***05 | Adapter-Tip; (K-100, 2-Strap, Rh) | 1 |
| 23***06 | Adapter-Tip; (K-100, 2-Strap, Lh) | 1 |
281-2106 Bucket As-Heavy Duty -Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 4 |
| 23***05 | Adapter-Tip; (K-100, 2-Strap, Rh) | 1 |
| 23***06 | Adapter-Tip; (K-100, 2-Strap, Lh) | 1 |
285-5635 Bucket As-Heavy Duty -Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 1 |
| 23***05 | Adapter-Tip; (K-100, 2-Strap, Rh) | 1 |
| 23***06 | Adapter-Tip; (K-100, 2-Strap, Lh) | 1 |
287-6234 Bucket As-Heavy Duty -B-Family
287-6239 Bucket As-Heavy Duty -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 5 |
| 23***95 | Adapter-Tip; (K-90, 2-Strap, Rh) | 1 |
| 23***96 | Adapter-Tip; (K-90, 2-Strap, Lh) | 1 |
281-2107 Bucket As-Heavy Duty -Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 5 |
| 23***05 | Adapter-Tip; (K-100, 2-Strap, Rh) | 1 |
| 23***06 | Adapter-Tip; (K-100, 2-Strap, Lh) | 1 |
281-2109 Bucket As-Heavy Duty Rock -Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 3 |
| 23***05 | Adapter-Tip; (K-100, 2-Strap, Rh) | 1 |
| 23***06 | Adapter-Tip; (K-100, 2-Strap, Lh) | 1 |
287-6240 Bucket As-Heavy Duty Rock -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 23***95 | Adapter-Tip; (K-90, 2-Strap, Rh) | 1 |
| 23***96 | Adapter-Tip; (K-90, 2-Strap, Lh) | 1 |
327-3663 Bucket Gp -Heavy-Duty, Cb-Family
| 22***75 | Tip Group-Penetration Plus; -K-100 | 5 |
| 28***04 | Bucket As-Heavy Duty; -Cb-Family | 1 |
| 29***78 | Pin Group-Bucket | 1 |
327-3669 Bucket Gp-Ditch Cleaning -Cb-Family
| 22***28 | Edge Group-Cutting; -Ditch Cleaning | 1 |
| 29***78 | Pin Group-Bucket | 1 |
| 29***25 | Bucket As-Ditch Cleaning; -Cb-Family | 1 |
327-3660 Bucket Gp-Ditch Cleaning -B-Family
| 22***28 | Edge Group-Cutting; -Ditch Cleaning | 1 |
| 29***00 | Bucket As-Ditch Cleaning; -B-Family | 1 |
| 2C***44 | Pin Group-Bucket | 1 |
327-3664 Bucket Gp-Heavy Duty -Cb-Family
| 22***75 | Tip Group-Penetration Plus; -K-100 | 5 |
| 28***05 | Bucket As-Heavy Duty; -Cb-Familly | 1 |
| 29***78 | Pin Group-Bucket | 1 |
327-3662 Bucket Gp-Heavy Duty -Cb-Family
| 22***75 | Tip Group-Penetration Plus; -K-100 | 4 |
| 28***03 | Bucket As-Heavy Duty; -Cb-Family | 1 |
| 29***78 | Pin Group-Bucket | 1 |
281-2101 Bucket Gp-Heavy Duty -Cb-Family
| 10***57 | Washer; (22x76.2x6-mm Thk) | 2 |
| 28***01 | Bucket Group-Heavy Duty; -Cb-Family | 1 |
| 28***35 | Bucket As-Heavy Duty; -Cb-Family, Dipstick | 1 |
327-3652 Bucket Gp-Heavy Duty -B-Family
| 21***93 | Tip Group-Penetration Plus; -K-90 | 3 |
| 28***33 | Bucket As-Heavy Duty; -B-Family | 1 |
| 2C***44 | Pin Group-Bucket | 1 |
327-3667 Bucket Gp-Heavy Duty -Cb-Family
| 22***75 | Tip Group-Penetration Plus; -K-100 | 7 |
| 28***08 | Bucket As-Heavy Duty; -Cb-Family | 1 |
| 29***78 | Pin Group-Bucket | 1 |
327-3656 Bucket Gp-Heavy Duty -B-Family
| 21***93 | Tip Group-Penetration Plus; -K-90 | 6 |
| 28***37 | Bucket As-Heavy Duty; -B-Family | 1 |
| 2C***44 | Pin Group-Bucket | 1 |
327-3657 Bucket Gp-Heavy Duty -B-Family
| 21***93 | Tip Group-Penetration Plus; -K-90 | 7 |
| 28***38 | Bucket As-Heavy Duty; -B-Family | 1 |
| 2C***44 | Pin Group-Bucket | 1 |
327-3661 Bucket Gp-Heavy Duty -Cb-Family
| 22***75 | Tip Group-Penetration Plus; -K-100 | 3 |
| 28***02 | Bucket As-Heavy Duty; -Cb-Family | 1 |
| 29***78 | Pin Group-Bucket | 1 |
327-3666 Bucket Gp-Heavy Duty -Cb-Family
| 22***75 | Tip Group-Penetration Plus; -K-100 | 7 |
| 28***07 | Bucket As-Heavy Duty; -Cb-Family | 1 |
| 29***78 | Pin Group-Bucket | 1 |
327-3658 Bucket Gp-Heavy Duty -B-Family
| 21***93 | Tip Group-Penetration Plus; -K-90 | 7 |
| 28***39 | Bucket As-Heavy Duty; -B-Family | 1 |
| 2C***44 | Pin Group-Bucket | 1 |
327-3665 Bucket Gp-Heavy Duty -Cb-Family
| 22***75 | Tip Group-Penetration Plus; -K-100 | 6 |
| 28***06 | Bucket As-Heavy Duty; -Cb-Family | 1 |
| 29***78 | Pin Group-Bucket | 1 |
327-3653 Bucket Gp-Heavy Duty -B-Family
| 21***93 | Tip Group-Penetration Plus; -K-90 | 4 |
| 28***34 | Bucket As-Heavy Duty; -B-Family | 1 |
| 2C***44 | Pin Group-Bucket | 1 |
327-3654 Bucket Gp-Heavy Duty -B-Family
| 21***93 | Tip Group-Penetration Plus; -K-90 | 5 |
| 28***35 | Bucket As-Heavy Duty; -B-Family | 1 |
| 2C***44 | Pin Group-Bucket | 1 |
327-3655 Bucket Gp-Heavy Duty -B-Family
| 21***93 | Tip Group-Penetration Plus; -K-90 | 5 |
| 28***36 | Bucket As-Heavy Duty; -B-Family | 1 |
| 2C***44 | Pin Group-Bucket | 1 |
327-3659 Bucket Gp-Heavy Duty Rock -B-Family
| 19***16 | Protector Group-Side Bar | 1 |
| 21***93 | Tip Group-Penetration Plus; -K-90 | 5 |
| 28***40 | Bucket As-Heavy Duty Rock; -B-Family | 1 |
327-3668 Bucket Gp-Heavy Duty Rock -Cb-Family
| 19***16 | Protector Group-Side Bar | 1 |
| 22***75 | Tip Group-Penetration Plus; -K-100 | 5 |
| 28***09 | Bucket As-Heavy Duty Rock; -Cb-Family | 1 |
262-3494 Coupler Ar-Quick -B1-Family
| 17***28 | Pin Group; -Coupler | 1 |
| 19***88 | Film Group; -Coupler Operation | 1 |
| 24***55 | Cylinder & Lines Group-Bucket | 1 |
262-3495 Coupler Ar-Quick -B1-Family
| 19***88 | Film Group; -Coupler Operation | 1 |
| 24***55 | Cylinder & Lines Group-Bucket | 1 |
| 26***95 | Coupler Ar-Quick; -B1-Family | 1 |
171-5951 Coupler Gp-Quick
| 12***68 | Rod-Threaded | 1 |
| 15***36 | Film-Warning; (Read Operation Manual) | 1 |
| 16***58 | Bolt; (M8x1.25x30-mm) | 3 |
235-0723 Coupler Gp-Quick
| 17***56 | Bearing | 1 |
| 17***02 | Cylinder Group-Coupler | 1 |
| 20***65 | Spring | 1 |
220-9128 Edge Gp-Cutting
| 17***29 | Edge-Cutting | 2 |
| 22***28 | Edge Group-Cutting; -Ditch Cleaning | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 6 |
290-5878 Pin Gp-Bucket
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 29***78 | Pin Group-Bucket | 1 |
| 29***79 | Pin As | 2 |
2c-9544 Pin Gp-Bucket
| 2C***62 | Pin | 2 |
| 2C***44 | Pin Group-Bucket | 1 |
| 7Y***27 | Bolt; (M16x2x190-mm) | 2 |
195-7216 Protector Gp-Side Bar
| 11***89 | Protector-Side Bar | 4 |
| 13***99 | Retainer As-G.E.T. | 8 |
| 19***16 | Protector Group-Side Bar | 1 |
7y-0366 Sidecutter Gp -C, D-Family
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 6 |
| 6I***71 | Bolt; (1-8x2.5-In) | 6 |
| 7Y***57 | Cutter, Side, R. H. | 1 |
7y-0729 Sidecutter Gp -B-Family
| 09***47 | Sidecutter (Lh) | 1 |
| 09***48 | Sidecutter (Rh) | 1 |
| 7X***51 | Nut-Hard; (M24 X 3.0) | 8 |
229-6969 Tip Gp-General Purpose -K-80
| 22***89 | Tip-General Purpose; (K-80) | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***69 | Tip Group-General Purpose; -K-80 | 1 |
9j-3167 Tip Gp-Long -J-300
| 10***08 | Pin-G.E.T. | 1 |
| 1U***02 | Tip ( Long ) | 1 |
| 8E***59 | Retainer Assem. | 1 |
229-6975 Tip Gp-Penetration Plus -K-100
| 22***90 | Retainer-G.E.T. | 1 |
| 22***03 | Tip Group-Penetration Plus; (K-100) | 1 |
| 22***75 | Tip Group-Penetration Plus; -K-100 | 1 |
217-4893 Tip Gp-Penetration Plus -K-90
| 21***93 | Tip Group-Penetration Plus; -K-90 | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***93 | Tip-Penetration Plus; (K-90)(K-90) | 1 |
320D RR serial number reference
The PIN/serial plate on a 320D RR or 320D LRR is a riveted metal tag on the machine frame, usually on the front-right side of the upper structure near the base of the boom or cab support, at ground-level eye height. Since 2001 Cat PIN plates carry the full 17-character PIN; positions 4-6 are the 3-letter model-specific prefix (e.g. HJC), followed by the sequential unit number, and this prefix+number shorthand (e.g. HJC00001-UP) is what parts and service manuals key off. If the plate is missing or worn, the number is also stamped directly into the frame steel near the same location as a backup.
| Prefix | Identifies | Notes |
|---|---|---|
| EBY | 320D RR / 320D LRR (reduced-radius, both standard and long-undercarriage) | Covers both the reduced-radius 320D RR and the long-undercarriage 320D LRR under one factory manual set. Fitted with the Cat 3066TA engine (turbocharged, aftercooled, approx. 103 kW / 138 hp). Early production block for this line. |
| FXK | 320D RR / 320D LRR (reduced-radius, both standard and long-undercarriage) | Covers both 320D RR and 320D LRR. Cat 3066TA engine. Same early-generation production run as EBY and GKL, documented in separate RR and LRR manual editions. |
| GKL | 320D RR / 320D LRR (reduced-radius, both standard and long-undercarriage) | Covers both 320D RR and 320D LRR. Cat 3066TA engine. Falls in the same early-generation production block as EBY and FXK, tied to the same factory manual set. |
| GMX | 320D RR / 320D LRR (reduced-radius, both standard and long-undercarriage) | Covers both 320D RR and 320D LRR. Cat C6.4 engine, marking the later production run after the line moved off the 3066TA. |
| HJC | 320D RR / 320D LRR (reduced-radius, both standard and long-undercarriage) | Covers both 320D RR and 320D LRR. Cat C6.4 engine, same later-generation block as GMX. |
| YDS | 320D RR (reduced-radius) | Tied to the 320D RR through factory parts-catalog and SIS listings. Engine and exact production window not confirmed - confirm with dealer. |
| RBL | 320D RR (reduced-radius) | Referenced as a 320D RR configuration in dealer manual and parts-catalog listings. Engine not confirmed for this prefix - confirm with dealer. |
| EJT | 320D LRR (reduced-radius, long undercarriage) | Referenced as a 320D LRR configuration with the Cat C6.4 engine, in the same later-generation family as GMX/HJC/ZGB. Only one clear source found - confirm with dealer. |
| ZGB | 320D LRR (reduced-radius, long undercarriage) | Referenced as a 320D LRR configuration with the Cat C6.4 engine, in the same later-generation family as GMX/HJC/EJT. Only one clear source found - confirm with dealer. |
| SCW | 320D LRR (reduced-radius, long undercarriage) | Referenced as a 320D LRR configuration in a parts-catalog and repair-manual listing. Engine and production window not confirmed - confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar 320D RR use?
It depends on when the machine was built. Early production, serial prefixes EBY, FXK, and GKL, carries the Cat 3066TA turbocharged diesel rated near 103 kW (138-140 hp). Later production, serial prefixes GMX and HJC, switches to the Cat C6.4 ACERT engine, rated 103 kW (140 hp) net on EU Stage IIIA-calibrated units or 110 kW (148 hp) net on North America Tier 3-calibrated units. Confirm the serial prefix before ordering fuel-system parts, since the two engines share no components.
What is the operating weight of the Caterpillar 320D RR?
Operating weight runs about 20,300 kg (44,750 lb) on the standard undercarriage, rising to roughly 21,500-25,000 kg (47,400-55,100 lb) on the long-undercarriage (320D LRR) build, depending on counterweight, track shoe width, and stick length fitted.
What replaced the Caterpillar 320D RR?
The Cat 320E LRR succeeded it, keeping the same 2.0 m (6 ft 7 in) reduced tail-swing layout while adding the fuel and hydraulic efficiency updates introduced across the 320E generation.
What 320D RR owners discuss
The 320D RR shipped with two different engines over its production run. Does it actually matter which one a given machine has?
Yes. Early production runs of the 320D RR carry the Cat 3066TA turbocharged diesel, a mechanically governed, pre-ACERT design. Later production switched to the Cat C6.4 ACERT, which adds electronic fuel rail control and extra sensors. Techs treat mixing these two up as the most common parts-ordering mistake on this model — filters, injectors, and diagnostic cabling are not interchangeable between them. Confirm which engine is actually fitted before ordering anything or booking diagnostic time.
Owners describe hydraulics feeling sharp when cold and going sluggish after 15-20 minutes of work. What's behind that?
This is a recurring complaint on the 320D RR, especially when two functions are run together (boom plus swing, or travel plus an attachment). Field diagnosis usually lands on one of three causes: hydraulic oil overheating from a marginal or dirty cooler, a main control valve spool starting to stick as it warms, or a tired main pump losing output once hot. There is no single universal cause reported, so check oil condition, level, and cooler cleanliness first before condemning the pump.
Does the reduced tail-swing design and heavier counterweight change undercarriage wear compared to a standard-swing 320D?
Owners report track shoes, chain, sprockets, and idlers wearing at a normal to slightly accelerated rate versus a standard-swing 320D, mostly attributed to the extra counterweight loading the drive train during tight-radius, high-cycle site work rather than any design defect. Regular track tension checks and replacing sprockets in matched sets to avoid uneven wear are the standard preventive steps recommended in the field.
What engine-specific quirks show up depending on whether the machine has the 3066TA or the C6.4 ACERT?
On 3066TA-engined units, the recurring complaint is injector seal leakage at the injector holder, usually traced to dried O-rings or fuel contamination — fuel filtration discipline matters more on this engine than most. On C6.4 ACERT-engined units, the recurring complaint is a crank-no-start or intermittent no-start condition, traced to fuel rail pressure failing to build, a loose crankshaft speed-sensor mount, or a bad wiring connection at the flywheel timing sensor. Identify the engine generation first, then aim diagnostics at the pattern that matches it.
What electrical or sensor faults come up most on this machine?
Across both engine generations, owners report nuisance derate or limp-mode events where all functions slow down evenly with no unusual noise — these trace back more often to a hydraulic pressure sensor or an ECM harness connection than to a real mechanical fault, so checking the monitor for stored fault codes comes before tearing into the pump or motors. On C6.4 ACERT machines specifically, there are two engine speed sensors — one near the injection pump, one near the flywheel — and a loose or failed one produces starting or running symptoms that look like a fuel problem.
Is swing drift on this machine treated as more than a productivity annoyance?
Yes. Several owners describe the upper structure creeping when the swing joystick is centered, traced to a worn swing brake, a failing holding or check valve in the swing circuit, or internal leakage in the swing motor. Because the RR/LRR is specifically bought to work close to walls, trenches, and personnel in tight-radius sites, uncommanded swing creep is treated as a safety issue, not just lost cycle time. Have your dealer verify swing brake holding pressure and motor case-drain flow before returning a machine with this symptom to service near people or structures.
What should a buyer check before purchasing a used 320D RR?
Walk the full perimeter looking for fluid puddles (hydraulic oil, engine oil, coolant) and confirm which engine generation is fitted, then match that against the service records on hand. Run every hydraulic function together and hold the machine under load to check for the heat-soak slowdown reported on this model. Inspect the rear frame and counterweight area for impact damage, since this variant is bought precisely for tight-radius work near obstructions. Check undercarriage tension and look for uneven sprocket or chain wear. In the cab, run the joystick, pedals, gauges, AC, and switches through their full range and check for stored fault codes on the monitor before the test run. Ask for an oil sample history — its absence is itself a warning sign on a machine this age.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 320D RR. Related factory variants of the same model family:
320D RR
Need a specific 320D RR part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.