Caterpillarexcavator
Caterpillar 318B N
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 318B N is a mid-size, roughly 18-tonne (40,000 lb) class hydraulic crawler excavator built on Cat's 300 Series B-generation platform, sitting between the smaller 315B and the larger 320B in Caterpillar's line-up of that era. Every 318B-family machine, including the 318B, 318B L, 318B LN, and 318B N, runs the same Cat 3046T turbocharged diesel: a mechanically governed 6-cylinder, 5.0-liter engine rated at roughly 88.7 kW (119 hp) gross and 85.8 kW (115 hp) net, with no ECM or electronic fault-code system. Operating weight runs 18,260-18,390 kg (40,255-40,540 lb) depending on undercarriage and track shoe width (500-600 mm). Production ran roughly 2000 through 2004 under serial prefixes 7KZ and 5XK (verify the exact break with a dealer). The N suffix identifies a narrow-gauge undercarriage (narrower track width and shoe size) offered alongside the standard, L (long), and LN (long-narrow) configurations; documentation for this era is not fully consistent on which suffix applies to a given serial block, so confirm the exact configuration against the machine's plate and parts lookup.
Across the 318B family, the real differences are undercarriage length and track shoe width, not powertrain: every variant shares the 3046T engine, 280 L fuel tank, and 188 L hydraulic system, with configuration driving lift capacity, reach, and ground pressure rather than horsepower. Caterpillar replaced the 318B line with the 318C in the mid-2000s, moving to an electronically controlled engine and ECM-based diagnostics the 318B never had. That shift is why the 318B N still holds value in the used and parts market today: it is mechanically governed, diagnosable and repairable without electronic service tools, and shares major driveline, hydraulic, and undercarriage components with its 315B and 320B siblings, which keeps parts sourcing and service costs manageable for owners running these machines well past mid-life hours.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 318B N specifications
Engine
| Engine model | Cat 3046T, 6-cylinder turbocharged diesel |
| Gross power | 88.7 kW (119 hp) |
| Net (flywheel) power | 85.8 kW (115 hp), rated to SAE J1349 / ISO 9249 / EEC 80/1269 |
| Displacement | 5.0 L / 4,998 cc (305 cu in) |
| Bore x stroke | 94 x 122 mm (3.70 x 4.80 in) |
| Emissions tier | Not published for this configuration. Production era predates current nonroad emissions-tier labeling; check with your dealer if a compliance rating is required. |
Weights
| Operating weight | 18,260-18,390 kg (40,255-40,540 lb); varies by undercarriage/track configuration |
| Ground pressure | Not published in available spec sources for this configuration. |
Dimensions
| Transport length | approx. 8.68 m (28.5 ft) |
| Transport width, standard (wide) undercarriage | 2.80 m (9.19-9.20 ft) |
| Transport width, narrow-gauge undercarriage variant | 2.49-2.50 m (8.17-8.20 ft) |
| Transport height, top of cab | 3.02-3.04 m (9.81-9.90 ft) |
| Tail swing radius | 2.47 m (8.04-8.10 ft) |
| Track shoe width, standard undercarriage | 600 mm (23.63 in) |
| Track shoe width, narrow-gauge undercarriage variant | 500 mm (19.69 in) |
| Ground clearance | 0.49-0.52 m (1.61-1.70 ft) |
| Undercarriage length (track on ground) | 3.27 m (10.72 ft) |
Performance
| Max dig depth | 5.61-7.01 m (18.41-23.00 ft), varies by stick/boom configuration |
| Max reach at ground level | 8.35-9.78 m (27.4-32.1 ft), varies by stick/boom configuration |
| Max dump/loading height | 6.74 m (22.1 ft) |
| Max cutting height | 8.59-9.75 m (28.19-32.0 ft), varies by stick/boom configuration |
| Travel speed, max | 4.6-4.7 km/h (2.86-2.90 mph) |
| Drawbar pull | 173.5 kN (39,000 lbf) |
| Swing speed | Not published in available spec sources for this configuration. |
| Gradeability | Not published in available spec sources for this configuration. |
Forces
| Bucket digging force | Not published in available spec sources. Cat literature for this family notes force varies with stick length (three stick options) and hydraulic relief-pressure setting; consult your dealer for the rated figure on a specific stick/bucket combination. |
| Stick (arm) digging force | Not published in available spec sources; varies by stick option (std vs long stick) and relief-pressure setting. |
Service capacities (summary)
| Fuel tank | 280 L (74 gal) |
| Hydraulic system, total fluid capacity | 188 L (49.7 gal); pump flow approx. 300 L/min (79.3 gpm) at 34.3 MPa (4,980 psi) relief pressure |
| Engine oil | Not published in available spec sources for this configuration. |
| Cooling system | approx. 17.4 L (4.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
318B N fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 12.9 L (3.4 US gal) | Cat DEO diesel engine oil. Viscosity grade set by ambient temperature per the OMM chart: SAE 10W-30 in cold climates, SAE 15W-40 in temperate to hot climates. |
| Cooling system | 17.4 L (4.6 US gal) | Cat DEAC (Diesel Engine Antifreeze/Coolant), premixed 50/50 with water, or Cat ELC (Extended Life Coolant) as the extended-service option. 50% concentration protects to about -37 C (-34 F). |
| Fuel tank | 280.1 L (74.0 US gal) | No. 2-D diesel fuel meeting Cat's fuel specification (ASTM D975 grade or equivalent). Use a winterized blend or anti-gel additive below freezing. |
| Hydraulic system (total, including tank) | 188.1 L (49.7 US gal) | Cat TDTO (Transmission and Drive Train Oil), TO-4 performance spec. One multi-purpose oil serves the hydraulic, swing-drive, and final-drive compartments on this machine. Grade by climate: Cat TDTO 10W in cold weather, TDTO 30 in warm weather, or multigrade Cat TDTO-TMS for a wider ambient range. |
| Hydraulic tank (reservoir only) | 104.8 L (27.7 US gal) | Cat TDTO, TO-4 spec, same fill as the full hydraulic system. |
| Final drive (each) | 2.7 L (0.7 US gal) | Cat TDTO, TO-4 spec. |
| Swing drive | 3.0 L (0.8 US gal) | Cat TDTO, TO-4 spec. |
| Grease (all pin, bushing, and swing-bearing points) | No fill capacity — service per the OMM greasing interval, not a reservoir volume | Cat MPGM (Multipurpose Grease), NLGI Grade 2, extreme-pressure formulation. Avoid calcium-based greases for seal compatibility. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 318B N maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 318B N beyond the schedule
Predictive Maintenance & Fluid Analysis
The 318B N's mechanically governed 3046T has no ECM, so scheduled S·O·S oil sampling is the primary early-warning tool: pull engine, swing drive, and final drive oil samples at each interval and track wear-metal trends instead of waiting for a fault light that will never come. Sample the 188 L hydraulic system regularly, too; contamination shows up as slow cycle times or erratic swing and travel response before a pump or valve actually fails. Log coolant condition on the 3046T's turbo cooling circuit to catch scaling early.
Corrective & Common Repairs
Expect turbocharger wear and injection pump drift on a high-hour 3046T; rough starts and blue smoke are early signs on this mechanically governed engine. Swing bearing and swing gear backlash develops with hour count and shows up as play at the house-to-frame joint. On the narrow-gauge N configuration, track chain, rollers, idlers, and sprockets wear faster with the 500 mm shoe than the wider 600 mm option in soft ground. Hydraulic cylinder rod seals on the boom, stick, and bucket circuits are common leak points needing periodic reseal.
Overhaul & Rebuild Points
Plan a 3046T top-end or in-frame overhaul once oil analysis or a compression check shows worn rings, liners, or valve guides, typical for engines running well past mid-life hours with no ECM to flag it early. Main hydraulic pump and swing motor wear shows up as reduced flow or slow cycle times and calls for a shop rebuild rather than a field fix. Final drive travel motors and the swing gear and bearing assembly are the other major rebuild candidates on a 318B N nearing the end of its service life.
Seasonal & Environment Servicing
Drain the fuel/water separator often in humid or rainy conditions to protect the 3046T's mechanical injection pump from water contamination. In cold climates, use the correct coolant concentration and a cold-weather fuel blend, since this engine has no electronic cold-start assist beyond glow or ether aids. Match track shoe width to ground conditions: the 500 mm shoe for firmer sites, 600 mm for soft or wet ground, and retension tracks more often when working in mud, sand, or freeze-thaw cycles that pack the undercarriage.
318B N common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 094-7998 | Head, Fuel Filter | Fuel system service | Check fitment → |
| 096-9013 | Gasket, Fuel Filter | Fuel system service | Check fitment → |
| 118-5768 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 5P-2645 | Elbow-Unfiltered Fuel From Adapter | Fuel system service | Check fitment → |
| 5I-8670 | Filter-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
318B N fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine Coolant Temperature warning lamp (red icon, instrument panel) | Engine coolant temperature has risen above the normal operating range. | Low coolant level, a blocked or fouled radiator core, a slipping or failed fan drive, or a faulty coolant temperature sender. | Reduce load and let the engine idle down. Once safe, check coolant level, inspect the radiator core for debris, and check the fan drive belt/clutch before resuming work. |
| Engine Oil Pressure warning lamp (red icon, oil-can symbol) | Engine oil pressure has dropped below the safe minimum for current engine speed. | Low oil level, a worn oil pump, a clogged oil filter, or a failed oil pressure sender/switch. | Shut the engine down right away. Check oil level and condition, then inspect the sender and filter before attempting a restart. |
| Alternator / Charging System warning lamp (battery icon) | The charging system is not supplying normal voltage to the machine batteries. | A loose or worn alternator belt, a failed alternator, or a corroded/loose battery connection. | Check belt tension and battery terminal condition first, then test alternator output if the lamp stays on with the engine running. |
| Hydraulic Oil Temperature warning lamp | Hydraulic tank oil temperature has exceeded the normal operating range. | Low hydraulic fluid level, a blocked or fouled hydraulic oil cooler, or sustained heavy-load operation in hot ambient conditions. | Ease off the load, let the machine idle to cool, then check fluid level and clean the oil cooler fins of debris. |
| Air Filter Restriction indicator | Air intake restriction on the engine air cleaner has reached the service limit. | A clogged primary or secondary air filter element. | Inspect the air filter element(s) and clean or replace per the maintenance schedule. |
| Fuel Level warning lamp / low-fuel gauge segment | Fuel level in the tank has dropped into the reserve range. | Normal fuel consumption approaching empty; occasionally an erratic gauge points to a faulty fuel level sender instead. | Refuel the machine. If the gauge still reads incorrectly after a full tank, check the sender and its wiring. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
318B N attachments & work tools
Buckets
318B N shares its bucket pin sizing and general fitment with the wider 318B/318C/319D family in the 18-19 t size class. General-purpose buckets for this class typically run about 0.9-1.3 m³ (1.2-1.7 cu yd) struck capacity, with heavy-duty/rock buckets sized smaller (roughly 0.6-1.0 m³) for added strength, varies by configuration/series. Buckets mount pin-on with a bucket pin around 65 mm (2.6 in) diameter; coupler-ready buckets use the same pin spacing so they interchange with coupler-equipped sticks in this family.
Hydraulic hammers
Operating weight for this model runs roughly 17.9-18.5 t (about 39,500-40,800 lb, varies by undercarriage/counterweight configuration), placing it in the carrier range for a medium performance-hammer class rated about 11-20 t, with the next class up usable at its low end. Expect a tool/moil diameter around 100-120 mm and an oil flow requirement near 60-120 L/min to match the hammer's rated circuit.
Quick couplers
This size class uses pin-grabber quick couplers, offered in both manual/mechanical wedge and hydraulic power-lock versions, sized for roughly 65-70 mm pins. A coupler lets the machine share buckets and other pin-on tools with similarly sized excavators in the same size family.
Thumbs/grapples
Hydraulic thumb kits for this class are sold under a shared fitment group covering this machine and its close size-class siblings, pivoting on a main pin around 80 mm and sized to match standard bucket widths. Rotating hydraulic grapples for brush, debris, and log handling are also available in this general size bracket.
Rippers
Single-tooth pin-on rippers are offered for this size class, using a pin size around 70 mm, for breaking hardpan, frozen ground, or light rock beyond what a standard bucket can handle.
Hydraulic-kit notes
Carriers of this class and era use an auxiliary hydraulic valve, standard or dealer-installed, for single-direction tool circuits such as a hammer or compactor; medium-pressure lines handle rotate/tilt functions on thumbs and grapples. Up to two stackable auxiliary valves can be combined with the main control valve to run more than one attachment function, varies by configuration/series.
All 318B N assemblies by section
Every catalogued assembly group for the Caterpillar 318B N. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
131-8974 Air Cleaner Gp
| 13***74 | Air Cleaner Group | 1 |
| 13***75 | Air Cleaner Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
212-8642 Air Cleaner Gp
| 09***77 | Valve (Evacuation) | 1 |
| 13***00 | Latch | 3 |
| 13***84 | Cover As | 1 |
310-9663 Air Cleaner Gp
| 09***77 | Valve (Evacuation) | 1 |
| 13***00 | Latch | 3 |
| 13***84 | Cover As | 1 |
131-8975 Air Cleaner Gp
| 09***77 | Valve (Evacuation) | 1 |
| 13***75 | Air Cleaner Group | 1 |
| 13***00 | Latch | 3 |
127-5924 Cover Gp-Turbocharger
| 12***24 | Cover Group-Turbocharger; (Turbocharger) | 1 |
| 12***25 | Cover-Turbocharger | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 3 |
7y-1583 Extension Gp-Exhaust
| 09***04 | Pipe As-Exhaust | 1 |
| 4I***54 | Clamp | 1 |
| 7Y***83 | Extension Group-Exhaust | 1 |
162-6291 Lines Gp-Air
| 13***28 | Hose-Air | 1 |
| 16***91 | Lines Group-Air | 1 |
| 16***46 | Pipe As | 1 |
176-1173 Manifold Gp-Exhaust
| 10***09 | Gasket | 1 |
| 17***73 | Manifold Group-Exhaust | 1 |
| 17***75 | Manifold-Exhaust | 1 |
106-8270 Manifold Gp-Exhaust
| 10***70 | Manifold Group-Exhaust; (Exhaust) | 1 |
| 10***08 | Manifold-Exhaust | 1 |
| 10***09 | Gasket | 1 |
151-5284 Manifold Gp-Inlet
| 10***64 | Gasket | 1 |
| 10***53 | Elbow | 1 |
| 15***84 | Manifold Group-Inlet; (Inlet) | 1 |
5i-8151 Muffler Gp
| 28***06 | Air Flow Metering Orifice, Muffler | 1 |
| 5I***24 | Stud | 3 |
| 5I***33 | Nut; (M10x1.25-Thd) | 6 |
5i-8160 Muffler Gp
| 28***05 | Muffler | 1 |
| 5I***24 | Stud | 3 |
| 5I***33 | Nut; (M10x1.25-Thd) | 6 |
116-6709 Turbocharger Gp
| 10***54 | Gasket-Exhaust | 1 |
| 10***40 | Elbow | 1 |
| 10***41 | Hose | 1 |
176-1176 Turbocharger Gp
| 11***67 | Turbocharger Group | 1 |
| 17***76 | Turbocharger Group | 1 |
| 17***77 | Pipe-Drain | 1 |
Basic Engine
116-9987 Camshaft Gp
| 09***28 | Key | 1 |
| 10***69 | Camshaft As | 1 |
| 11***87 | Camshaft Group | 1 |
151-5279 Cover Gp-Valve Mechanism
| 10***69 | Gasket; (Valve Cover) | 1 |
| 11***75 | Cap; (Oil Fill) | 1 |
| 15***79 | Cover Group-Valve Mechanism; (Valve Mechanism) | 1 |
116-9988 Crankshaft Gp
| 08***13 | Pin | 1 |
| 09***28 | Key | 1 |
| 10***88 | Plate-Thrust; (Standard) | 3 |
201-1037 Cylinder Block As
| 09***41 | Cap | 9 |
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
106-8230 Cylinder Block Gp
| 10***79 | Seal-Side | 2 |
| 10***30 | Cylinder Block Group | 1 |
| 12***11 | Kit-Jacket Water Heater | 1 |
246-5432 Cylinder Head As
| 09***35 | Plug-Drain | 2 |
| 10***66 | Plug-Cup | 18 |
| 10***47 | Guide-Valve | 12 |
151-5304 Cylinder Head As
| 09***35 | Plug-Drain | 2 |
| 10***47 | Guide-Valve | 12 |
| 10***52 | Seat-Valve; (Inlet) | 6 |
151-5305 Cylinder Head Gp
| 10***82 | Spring | 12 |
| 10***46 | Bolt-Cylinder Head | 25 |
| 10***60 | Seal-Valve Stem | 12 |
116-6715 Flywheel Gp
| 11***15 | Flywheel Group | 1 |
| 11***25 | Flywheel As | 1 |
| 11***26 | Gear (Z=122) | 1 |
116-6710 Gear Gp-Front
| 10***90 | Bolt (16mm Long) | 1 |
| 11***10 | Gear Group-Front; (Front) | 1 |
| 11***83 | Gear As-Idler; (49-Teeth) | 1 |
116-6718 Housing Gp-Flywheel
| 09***24 | Stud | 2 |
| 10***80 | Gasket-Rear | 1 |
| 10***99 | Bolt (30mm Long) | 2 |
116-6713 Housing Gp-Front
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
| 10***29 | Seal-Oil | 1 |
106-8236 Lifting Gp-Engine
| 10***36 | Lifting Group-Engine; (Engine) | 1 |
| 23***94 | Gasket | 1 |
| 23***87 | Eye-Lifting; (Front Head) | 1 |
131-8976 Mounting Gp-Engine
| 09***07 | Washer; (16.5x90x9-mm Thk) | 4 |
| 11***33 | Mount-Flexible | 2 |
| 11***34 | Mount-Flexible | 2 |
151-5318 Pan Gp-Oil
| 10***81 | Gasket | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***69 | Plug | 1 |
160-6613 Piston & Rod Gp
| 10***57 | Ring Set(Standard) | 6 |
| 10***80 | Rod As-Connecting | 6 |
| 10***83 | Bearing-Connecting Rod | 12 |
116-6711 Pulley Gp-Crankshaft
| 09***28 | Key | 1 |
| 10***75 | Damper | 1 |
| 11***11 | Pulley Group-Crankshaft; (Crankshaft) | 1 |
116-6712 Pulley Gp-Fan & Alt Drive
| 11***12 | Pulley Group-Fan & Alt Drive | 1 |
| 11***35 | Pulley | 1 |
| 6V***15 | Bolt; (M8x1.25x16-mm) | 4 |
106-8238 Valve Mechanism Gp
| 10***65 | Plug-Rocker Arm Shaft | 2 |
| 10***67 | Bracket-Rocker Arm Shaft | 6 |
| 10***68 | Bolt-Rocker Bracket | 6 |
Cooling System
106-8262 Cooler Gp-Engine Oil
| 10***62 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
| 10***67 | Cooler-Oil; (Engine) | 1 |
| 19***89 | Gasket | 1 |
139-3026 Cooling Ar
| 13***26 | Cooling Ar | 1 |
| 14***34 | Door Group-Access | 1 |
| 16***83 | Control Group-Machine | 1 |
5i-8150 Fan Gp-Suction
| 5I***69 | Bolt; (M10x1.5x20-mm) | 4 |
| 5I***94 | Fan | 1 |
| 5I***50 | Fan Group-Suction; (Suction) | 1 |
116-6725 Lines Gp-Water
| 09***69 | Cover-Thermostat | 1 |
| 10***04 | Gasket; (Thermostat) | 1 |
| 11***50 | Gasket | 1 |
116-6724 Pump Gp-Water
| 11***24 | Pump Group-Water; (Water) | 1 |
| 11***32 | Gasket-Water Pump | 1 |
| 11***33 | Pump As-Water | 1 |
190-5806 Radiator & Hyd Oil Cooler Gp
| 09***34 | Bolt; (Wing) (M6x1.0x15mm) | 3 |
| 09***35 | Clamp | 2 |
| 12***74 | Valve-Drain | 1 |
162-6292 Radiator & Hyd Oil Cooler Gp
| 09***61 | Strap; (Cable) | 4 |
| 09***44 | Tank As-Coolant; (Includes Coolant Level Switch) | 1 |
| 09***35 | Clamp | 1 |
162-6293 Radiator & Hyd Oil Cooler Gp
| 09***34 | Bolt; (Wing) (M6x1.0x15mm) | 3 |
| 09***35 | Clamp | 3 |
| 12***74 | Valve-Drain | 1 |
Electrical And Starting System
111-4696 Alarm Gp-Travel
| 11***96 | Alarm Group-Travel | 1 |
| 3E***38 | Alarm As-Backup | 1 |
| 3E***39 | Wire As; (Backup Alarm) | 1 |
5i-8085 Alternator Gp-Charging
| 08***29 | Nut Set | 1 |
| 13***81 | Plate | 1 |
| 13***82 | Nut Set | 1 |
116-6730 Alternator Gp-Charging
| 09***83 | Bolt; (M12 X 1.25 X 30mm) | 2 |
| 11***30 | Alternator Group-Charging; (Charging) | 1 |
| 11***10 | Strap-Adjustment | 1 |
170-6866 Battery & Wiring Gp -Cold Weather
| 11***80 | Cable As; (Jumper) | 1 |
| 17***66 | Battery & Wiring Group; -Cold Weather | 1 |
| 17***67 | Cable As | 1 |
167-3615 Battery & Wiring Gp
| 09***63 | Grommet | 1 |
| 09***10 | Clamp | 1 |
| 09***40 | Clip | 1 |
132-1891 Battery & Wiring Gp
| 10***17 | Cable As-Battery & Wiring | 1 |
| 11***37 | Clip | 2 |
| 11***80 | Cable As; (Jumper) | 1 |
117-6264 Control & Mtg Gp-Power Window
| 11***64 | Control & Mtg Group-Power Window | 1 |
| 11***05 | Control Group-Window | 1 |
| 9X***44 | Screw-Truss Head (M6x1x16mm); (M6x1x16-mm) | 2 |
138-5190 Control Gp-Engine Electronic -Engine Shutdown
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***90 | Control Group-Engine Electronic; -Engine Shutdown | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
164-8252 Control Gp-Machine
| 10***91 | Bracket Assem. | 1 |
| 16***52 | Control Group-Machine | 1 |
| 16***53 | Control Group-Engine & Hydraulic Pump | 1 |
164-8283 Control Gp-Machine
| 15***40 | Control As-Electronic | 1 |
| 16***83 | Control Group-Machine | 1 |
| 16***84 | Circuit As | 1 |
170-6874 Control Gp-Starting Aid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Controller-Air | 1 |
| 11***14 | Switch As-Magnetic; (24-Volt)(Heater Relay) | 1 |
150-7021 Converter Gp-Electrical
| 13***46 | Converter Group-Electrical; (24-Volt To 12-Volt) | 1 |
| 15***21 | Converter Group-Electrical | 1 |
| 15***22 | Harness As | 1 |
134-7022 Cover Gp-Starting Motor
| 13***22 | Cover Group-Starting Motor; (Starting Motor) | 1 |
| 13***69 | Cover | 1 |
| 13***70 | Bolt; (M5x0.8x25-mm) | 1 |
116-6728 Glow Plug Gp
| 10***60 | Bar-Connector | 1 |
| 11***28 | Glow Plug Group; (Glow) | 1 |
| 11***85 | Glow Plug | 6 |
166-6124 Kit-Starting Aid
| 16***13 | Hose-Air | 1 |
| 16***15 | Elbow As | 1 |
| 16***24 | Kit-Starting Aid; (Air Inlet Heater) | 1 |
153-2523 Lamp Gp-Flood
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
111-4813 Lamp Gp-Flood -Cab
| 11***13 | Lamp Group-Flood; -Cab | 1 |
| 12***69 | Lamp Group-Flood | 2 |
| 12***72 | Bracket | 2 |
153-2521 Lamp Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
121-1069 Lamp Gp-Flood
| 12***69 | Lamp Group-Flood | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
145-0572 Lighting Gp-Boom
| 11***36 | Clip | 7 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
140-0919 Lighting Gp-Boom
| 11***36 | Clip | 2 |
| 14***19 | Lighting Group-Boom | 1 |
| 14***20 | Harness As | 1 |
140-0853 Lighting Gp-Cab
| 11***13 | Lamp Group-Flood; -Cab | 1 |
| 12***77 | Bracket As | 2 |
| 14***53 | Lighting Group-Cab | 1 |
111-4694 Lighting Gp-Cab
| 11***94 | Lighting Group-Cab | 1 |
| 11***43 | Harness As; (Cab) | 2 |
| 12***26 | Clip | 2 |
7y-8189 Lighting Gp-Cab
| 11***43 | Harness As; (Cab) | 2 |
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 2 |
| 3K***07 | Grommet (Small) | 2 |
4i-5409 Lighting Gp-Chassis -Front, Rh
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 4I***09 | Lighting Group-Chassis; -Front, Rh | 1 |
170-6875 Panel Gp-Circuit Breaker
| 09***80 | Switch-Magnetic; (24-Volt)(Start Relay) | 1 |
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
190-8148 Starting Aid Gp
| 10***53 | Elbow | 1 |
| 16***15 | Elbow As | 1 |
| 16***57 | Heater As; (24-Volt) | 1 |
134-7023 Starting Motor Gp-Electric
| 09***50 | Stopper Set | 1 |
| 09***80 | Packing | 2 |
| 09***85 | Bolt Set | 1 |
141-7818 Starting Motor Gp-Electric
| 12***19 | Starting Motor Group-Electric; (Electric) | 1 |
| 13***22 | Cover Group-Starting Motor; (Starting Motor) | 1 |
| 13***23 | Starting Motor Group-Electric; (Electric) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
7n-0719 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 1 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***19 | Switch Group-Disconnect; -Battery | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
106-0054 Wiring Gp-Cab
| 10***54 | Wiring Group-Cab | 1 |
| 12***00 | Strap; (Marked Z) | 16 |
| 15***89 | Harness As-Wiring | 1 |
116-0159 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***59 | Wiring Group-Cab | 1 |
| 11***58 | Harness As | 1 |
143-1625 Wiring Gp-Console
| 14***25 | Wiring Group-Console | 1 |
| 14***26 | Wiring Group-Console; (Console), Scraper Ring; Piston Seal | 1 |
| 14***28 | Wiring Group-Console; (Console) | 1 |
149-5026 Wiring Gp-Console
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
| 11***82 | Strap | 2 |
149-5028 Wiring Gp-Console
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
140-0865 Wiring Gp-Console
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 1 |
| 10***04 | Screw As; (M5x0.8x10-mm) | 4 |
| 11***36 | Clip | 2 |
121-1099 Wiring Gp-Power Window
| 11***89 | Switch As-Rocker; (Power Window) | 1 |
| 11***73 | Connector; (Receptacle) | 1 |
| 11***74 | Terminal; (Male) | 5 |
150-7025 Wiring Gp-Radio
| 10***46 | Guard; (9.5-cm Each) | 0 |
| 10***35 | Rod As-Antenna | 1 |
| 10***36 | Antenna Assem. | 1 |
140-0867 Wiring Gp-Radio
| 09***27 | Screw-Machine; (M4x0.7x12-mm) | 8 |
| 10***46 | Guard; (9.5-cm Each) | 0 |
| 10***35 | Rod As-Antenna | 1 |
128-8875 Wiring Gp-Refueling Pump
| 11***36 | Clip | 3 |
| 11***95 | Switch As | 1 |
| 11***96 | Harness As-Wiring; (Refueling Pump, Start) | 1 |
111-4695 Wiring Gp-Window Wiper
| 11***95 | Wiring Group-Window Wiper | 1 |
| 11***85 | Switch As-Rocker; (Lower Wiper) | 1 |
| 11***86 | Switch As-Rocker; (Lower Washer)(Lower Washer) | 1 |
Engine Arrangement
151-6598 Engine Ar
| 12***24 | Cover Group-Turbocharger; (Turbocharger) | 1 |
| 15***98 | Engine Ar | 1 |
| 15***72 | Engine Ar | 1 |
162-6289 Engine Ar
| 12***24 | Cover Group-Turbocharger; (Turbocharger) | 1 |
| 16***89 | Engine Ar | 1 |
| 17***67 | Engine Ar-Primary | 1 |
156-4372 Engine Ar
| 10***30 | Cylinder Block Group | 1 |
| 10***36 | Lifting Group-Engine; (Engine) | 1 |
| 10***38 | Valve Mechanism Group | 1 |
162-6268 Engine Ar
| 12***24 | Cover Group-Turbocharger; (Turbocharger) | 1 |
| 16***68 | Engine Ar | 1 |
| 17***66 | Engine Ar-Primary | 1 |
176-1067 Engine Ar-Primary
| 10***30 | Cylinder Block Group | 1 |
| 10***36 | Lifting Group-Engine; (Engine) | 1 |
| 10***38 | Valve Mechanism Group | 1 |
176-1066 Engine Ar-Primary
| 10***30 | Cylinder Block Group | 1 |
| 10***36 | Lifting Group-Engine; (Engine) | 1 |
| 10***38 | Valve Mechanism Group | 1 |
176-7085 Engine Ar-Primary
| 10***30 | Cylinder Block Group | 1 |
| 10***36 | Lifting Group-Engine; (Engine) | 1 |
| 10***62 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
162-6290 Installation Ar-Engine
| 10***37 | Lines Group-Stick Drain | 1 |
| 13***74 | Air Cleaner Group | 1 |
| 13***76 | Mounting Group-Engine | 1 |
Frame And Body
121-9101 Box & Mounting Gp
| 12***01 | Box & Mounting Group | 1 |
| 12***26 | Spacer; (13x25x25-mm Thk) | 4 |
| 15***53 | Box Group-Storage | 1 |
135-1294 Box & Mtg Gp-Tool
| 10***13 | Bolt As-Special; (M12x1.75x15-mm) | 1 |
| 13***94 | Box & Mtg Group-Tool; (Storage) | 1 |
151-1715 Box Gp-Storage
| 15***15 | Box Group-Storage | 1 |
| 15***16 | Box Group-Storage | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
151-1716 Box Gp-Storage
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 09***17 | Screw-Machine; (M6x1x12-mm)(M6x1x12mm) | 4 |
154-0653 Box Gp-Storage
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 09***17 | Screw-Machine; (M6x1x12-mm)(M6x1x12mm) | 4 |
144-9365 Counterweight Gp
| 10***34 | Liner | 2 |
| 10***35 | Liner | 1 |
| 10***37 | Liner | 1 |
144-9363 Counterweight Gp
| 11***77 | Shim; (1.0mm Thk) | 4 |
| 11***53 | Shim; (1.5mm Thk) | 4 |
| 14***63 | Counterweight Group | 1 |
135-1343 Door Gp-Access
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 10***68 | Liner | 1 |
| 10***69 | Liner | 1 |
144-9234 Door Gp-Access
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 11***27 | Hinge | 2 |
| 12***44 | Liner | 1 |
146-6970 Fender & Cover Gp
| 11***24 | Washer | 2 |
| 11***63 | Cover | 1 |
| 14***70 | Fender & Cover Group | 1 |
167-9890 Frame Gp-Upper
| 09***84 | Shim (1.0 mm Thick) | 6 |
| 09***16 | Shim (2.0 mm Thick) | 3 |
| 09***49 | Washer; (22x60x6-mm Thk) | 3 |
102-6435 Gear & Bearing Gp-Swing
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***93 | Dowel | 1 |
| 09***95 | Plug | 1 |
139-3021 Guard Ar-Bottom
| 13***75 | Guard Group-Swivel | 1 |
| 13***21 | Guard Ar-Bottom | 1 |
| 14***80 | Guard Group-Bottom; (Bottom) | 1 |
175-1044 Guard Gp-Bottom
| 10***61 | Sheet | 1 |
| 13***90 | Sheet | 1 |
| 13***91 | Sheet | 1 |
121-9140 Guard Gp-Bottom
| 09***91 | Bolt; (Locking) (M12x1.75x25mm) | 1 |
| 10***61 | Sheet | 1 |
| 12***40 | Guard Group-Bottom | 1 |
144-9380 Guard Gp-Bottom
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 32 |
| 14***80 | Guard Group-Bottom; (Bottom) | 1 |
| 14***81 | Plate As | 1 |
134-8875 Guard Gp-Swivel
| 13***75 | Guard Group-Swivel | 1 |
| 13***76 | Plate As | 1 |
| 13***78 | Plate As | 1 |
144-9231 Handhold Gp
| 12***48 | Pipe Assem. | 1 |
| 13***92 | Sleeve Assem. | 1 |
| 13***94 | Bolt; (M12x1.75x53-mm)(M12x1.75'Thd) | 2 |
144-9230 Handrail Gp
| 14***30 | Handrail Group | 1 |
| 14***31 | Handhold Group | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 3 |
170-2669 Hood & Guard Gp
| 08***08 | Shim (1.0mm Thick) | 4 |
| 08***09 | Shim (2.0mm Thick) | 4 |
| 08***94 | Shim (2.0mm Thick) | 6 |
170-2781 Hood Gp-Engine
| 10***72 | Seal (21.45dmx2) | 0 |
| 13***50 | Liner As | 1 |
| 14***73 | Hinge | 2 |
132-4183 Mounting Gp-Grease Gun
| 13***83 | Mounting Group-Grease Gun; (Grease Gun) | 1 |
| 4I***84 | Support | 1 |
| 8T***79 | Bolt; (M12x1.75x20mm)(To Turbocharder-Mounting Face) | 2 |
Fuel System
132-7794 Control Gp-Governor
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
151-5573 Filter Gp-Fuel
| 09***98 | Head, Fuel Filter | 1 |
| 09***25 | Plug | 1 |
| 09***26 | Bolt; (M14x1.5x26-mm) | 2 |
137-6384 Governor As-Fuel Inj Pump
| 08***32 | Bolt (18mm Long) | 1 |
| 09***36 | Nut | 1 |
| 09***20 | Locknut | 1 |
135-1292 Lines Gp-Fuel
| 09***63 | Grommet | 2 |
| 09***86 | Clamp; (Hose) | 7 |
| 10***03 | Grommet | 1 |
135-1291 Lines Gp-Fuel
| 09***63 | Grommet | 2 |
| 09***86 | Clamp; (Hose) | 4 |
| 10***03 | Grommet | 1 |
151-5563 Lines Gp-Fuel Filter
| 09***34 | Hose As | 1 |
| 09***40 | Washer | 2 |
| 09***09 | Screen | 1 |
160-6599 Lines Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 09***74 | Clip-Hose | 13 |
| 09***94 | Shim (0.700mm Thick) | 1 |
151-5581 Lines Gp-Fuel Injection
| 12***48 | Clamp | 6 |
| 12***49 | Clamp | 4 |
| 12***38 | Line As-Fuel Injection | 1 |
123-3928 Pump & Motor Gp-Fuel Transfer
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***28 | Pump & Motor Group-Fuel Transfer | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
132-4054 Pump Ar-Fuel Transfer
| 12***01 | Box & Mounting Group | 1 |
| 12***75 | Wiring Group-Refueling Pump | 1 |
| 13***54 | Pump Ar-Fuel Transfer | 1 |
160-6593 Pump Gp-Fuel Injection
| 09***29 | Bolt (16mm Long) | 6 |
| 09***51 | Bolt (22mm Long) | 1 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
176-1178 Pump Gp-Fuel Injection
| 09***29 | Bolt (16mm Long) | 6 |
| 09***51 | Bolt (22mm Long) | 1 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
160-6594 Pump Gp-Fuel Injection
| 11***86 | Pump Group-Fuel Tfr & Priming; (Fuel Transfer & Prim) | 1 |
| 13***84 | Governor As-Fuel Inj Pump | 1 |
| 13***87 | Pump Group-Fuel Transfer | 1 |
117-9186 Pump Gp-Fuel Tfr & Priming
| 08***38 | Piston | 1 |
| 09***79 | Valve, Check | 1 |
| 09***80 | Spring-Pump | 1 |
144-9353 Pump Gp-Fuel Transfer
| 00***98 | Connector-Hose (3/4-14nptf Thd) | 1 |
| 03***83 | Nipple-Front Axle Suction Port | 1 |
| 12***14 | Film-Instruction; (Refueling Pump) | 1 |
137-6387 Pump Gp-Fuel Transfer
| 08***07 | Seat, Lower | 6 |
| 08***09 | Shim (1.0mm Thick) | 3 |
| 08***10 | Shim (1.5mm Thick) | 3 |
108-9139 Separator Gp-Water
| 09***11 | Seal-O-Ring (Id=6.80mm) | 1 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 1 |
| 10***39 | Separator Group-Water | 1 |
135-1289 Tank & Mtg Gp-Fuel
| 13***89 | Tank & Mtg Group-Fuel | 1 |
| 13***90 | Tank Group-Fuel | 1 |
| 6I***23 | Spacer; (17x28x25-mm Thk) | 4 |
135-1301 Tank Ar-Fuel
| 00***07 | Elbow; (90 Degree) | 2 |
| 09***68 | Grommet | 1 |
| 09***91 | Bolt; (Locking) (M12x1.75x25mm) | 1 |
144-9356 Tank Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 08***81 | Cap As; (Fuel Tank)(Fuel Tank) | 1 |
135-1290 Tank Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 08***81 | Cap As; (Fuel Tank)(Fuel Tank) | 1 |
121-9035 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
Hydraulic System
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 11***28 | Control Group-Hydraulic Pedal; -Auxiliary | 1 |
| 13***69 | Lines Group-Front; (Front) | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 11***28 | Control Group-Hydraulic Pedal; -Auxiliary | 1 |
| 13***67 | Lines Group-Front; (Front) | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 13***28 | Shim; (0.1-mm Thk) | 1 |
| 13***31 | Packing | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 11***28 | Control Group-Hydraulic Pedal; -Auxiliary | 1 |
| 13***71 | Lines Group-Front; (Front) | 1 |
| 13***72 | Lines Group-Pilot; (Pilot) | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 13***28 | Shim; (0.1-mm Thk) | 1 |
| 13***29 | Block | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 16***35 | Coupling As | 1 |
| 16***36 | Hub | 1 |
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
129-8033 Base Gp-Oil Filter
| 12***33 | Base Group-Oil Filter | 1 |
| 14***55 | Cylinder & Seal Group-Boom | 1 |
| 14***54 | Lines Group-Boom Cylinder | 1 |
173-3503 Base Gp-Oil Filter -Hydraulic
| 14***55 | Cylinder & Seal Group-Boom | 1 |
| 14***55 | Lines Group-Boom Cylinder | 1 |
| 17***03 | Base Group-Oil Filter; -Hydraulic | 1 |
132-1763 Control Ar-Auxiliary
| 13***63 | Control Ar-Auxiliary | 1 |
| 14***96 | Lines Group-Stick Cylinder | 1 |
| 14***71 | Cylinder | 1 |
132-1762 Control Ar-Auxiliary
| 13***62 | Control Ar-Auxiliary | 1 |
| 14***95 | Lines Group-Boom Cylinder | 1 |
| 14***69 | Cylinder | 1 |
132-1761 Control Ar-Auxiliary
| 13***61 | Control Ar-Auxiliary | 1 |
| 14***94 | Lines Group-Boom Cylinder | 1 |
| 14***69 | Cylinder | 1 |
162-6288 Coupling Gp-Pump
| 11***68 | Lines Group-Bucket Cylinder; (Bucket Cylinder) | 1 |
| 16***88 | Coupling Group-Pump | 1 |
| 17***79 | Cylinder & Seal Group-Bucket; (Bucket) | 1 |
147-5871 Cylinder & Seal Gp-Stick
| 09***40 | Gauge-Oil Level (Dipstick) | 1 |
| 14***71 | Cylinder | 1 |
| 14***31 | Drive Group-Swing | 1 |
147-5756 Cylinder Gp-Boom
| 14***56 | Cylinder | 1 |
| 14***28 | Drive Group-Swing | 1 |
| 16***13 | Motor Group-Swing | 1 |
147-5760 Cylinder Gp-Stick
| 11***53 | Housing Group-Filter | 1 |
| 11***54 | Cover | 1 |
| 12***03 | Seal-O-Ring (Id=185mm) | 2 |
147-5869 Cylinder & Seal Gp-Boom
| 08***45 | Seal As; (Id=108.00mm) | 1 |
| 08***46 | Ring | 2 |
| 09***19 | Seal-O-Ring (Id=124.40mm) | 1 |
147-5757 Cylinder & Lines Gp-Boom
| 14***57 | Cylinder & Lines Group-Boom | 1 |
| 14***62 | Cylinder & Seal Group-Bucket | 1 |
| 14***57 | Lines Group-Bucket Cylinder | 1 |
147-5870 Cylinder & Lines Gp-Boom
| 08***55 | Ring | 2 |
| 09***47 | Ring; (Retaining) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
147-5867 Cylinder & Lines Gp-Boom
| 14***01 | Lines Group-Bucket Cylinder | 1 |
| 14***67 | Cylinder & Lines Group-Boom | 1 |
| 14***73 | Cylinder & Seal Group-Bucket | 1 |
147-5868 Cylinder & Lines Gp-Boom
| 14***59 | Cylinder & Seal Group-Stick | 1 |
| 14***56 | Lines Group-Stick Cylinder | 1 |
| 14***68 | Cylinder & Lines Group-Boom | 1 |
147-5754 Cylinder & Lines Gp-Boom
| 11***06 | Lines Group-Bucket Cylinder | 1 |
| 11***71 | Cylinder & Seal Group-Bucket | 1 |
| 14***54 | Cylinder & Lines Group-Boom | 1 |
147-5761 Cylinder & Lines Gp-Bucket
| 09***34 | Shim; (T=69.85mm) | 2 |
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 11***34 | Cylinder Group-Bucket | 1 |
118-3969 Cylinder & Lines Gp-Bucket
| 08***55 | Ring | 2 |
| 09***47 | Ring; (Retaining) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
147-5872 Cylinder & Lines Gp-Bucket
| 09***15 | Seal-O-Ring | 1 |
| 09***16 | Setscrew-Socket; (M12x1.75x12-mm) | 1 |
| 09***91 | Ball, Steel | 1 |
118-3966 Cylinder & Lines Gp-Bucket
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 11***66 | Cylinder & Lines Group-Bucket; (Bucket) | 1 |
| 14***56 | Cylinder | 1 |
147-5758 Cylinder & Lines Gp-Stick
| 09***34 | Shim; (T=69.85mm) | 2 |
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 14***58 | Cylinder & Lines Group-Stick | 1 |
147-5755 Cylinder & Seal Gp-Boom
| 08***55 | Ring | 2 |
| 09***47 | Ring; (Retaining) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
118-3967 Cylinder & Seal Gp-Bucket
| 09***54 | Seal; (Id=79.85mm) | 4 |
| 11***67 | Cylinder & Seal Group-Bucket | 1 |
| 14***60 | Cylinder | 1 |
147-5762 Cylinder & Seal Gp-Bucket
| 08***04 | Locknut; (M64) | 1 |
| 08***10 | Ring; (Back Up) | 1 |
| 09***30 | Wiper | 1 |
118-3971 Cylinder & Seal Gp-Bucket
| 08***07 | Stop | 1 |
| 08***10 | Ring; (Back Up) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
171-3379 Cylinder & Seal Gp-Bucket
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
147-5873 Cylinder & Seal Gp-Bucket
| 09***79 | Seal-U-Cup | 1 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 09***54 | Ring; (Buck Up) | 1 |
147-5759 Cylinder & Seal Gp-Stick
| 09***87 | Ring-Retaining | 1 |
| 09***88 | Seal-O-Ring | 2 |
| 09***89 | Pin, Dowel | 2 |
147-5763 Cylinder Gp-Bucket
| 14***63 | Cylinder Group-Bucket | 1 |
| 5I***70 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Pilot) | 1 |
118-4134 Cylinder Gp-Bucket
| 09***93 | Dowel | 1 |
| 11***34 | Cylinder Group-Bucket | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
148-4731 Drive Gp-Swing
| 09***10 | Seal-O-Ring; (Id=4.80mm) | 6 |
| 09***81 | Seal-O-Ring | 1 |
| 12***81 | Filter Element As-Oil; (Standard Efficiency)(Hydraulic, Return) | 1 |
148-4728 Drive Gp-Swing
| 11***54 | Cover | 1 |
| 12***03 | Seal-O-Ring (Id=185mm) | 2 |
| 12***80 | Filter Group-Oil; -Hydraulic | 1 |
148-4730 Drive Gp-Swing
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
| 14***30 | Drive Group-Swing | 1 |
136-2985 Fastener Gp-Swing & Final Dr
| 09***81 | Seal-O-Ring | 1 |
| 12***81 | Filter Element As-Oil; (Standard Efficiency)(Hydraulic, Return) | 1 |
| 13***85 | Fastener Group-Swing & Final Dr | 1 |
4i-6078 Filter Gp-Oil
| 13***34 | Ring; (Stop) | 1 |
| 14***68 | Screw; (Machine) (M4x0.7x10mm) | 8 |
| 4I***78 | Filter Group-Oil; (Hydraulic) | 1 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 15***31 | Lines Group-Auxiliary Hydraulic | 1 |
| 15***32 | Stick Group-Hoe | 1 |
| 18***42 | Filter Group-Oil; -Hydraulic Return | 1 |
107-6995 Filter Gp-Oil
| 10***58 | Lines Group-Swing Motor | 1 |
| 10***95 | Filter Group-Oil; -Hydraulic Return | 1 |
| 13***61 | Tank & Mtg Group-Hydraulic | 1 |
173-3511 Filter Gp-Oil
| 14***32 | Lines Group-Auxiliary Hydraulic | 1 |
| 14***39 | Stick Group-Hoe | 1 |
| 17***11 | Filter Group-Oil; -Hydraulic Return | 1 |
184-3995 Filter Gp-Oil
| 15***77 | Lines Group-Auxiliary Hydraulic | 1 |
| 15***78 | Stick Group-Hoe | 1 |
| 18***95 | Filter Group-Oil; -Hydraulic | 1 |
188-4148 Filter Gp-Oil -Hydraulic Return
| 08***24 | Valve Group-Relief; -1-Way Flow-Line | 1 |
| 14***75 | Support As | 1 |
| 15***73 | Hose As | 1 |
126-2080 Filter Gp-Oil
| 12***80 | Filter Group-Oil; -Hydraulic | 1 |
| 14***31 | Lines Group-Auxiliary Hydraulic | 1 |
| 14***37 | Boom Group | 1 |
126-2075 Filter Gp-Oil
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 11***69 | Lever | 1 |
| 11***70 | Support Assem. | 1 |
116-3653 Housing Gp-Filter
| 11***53 | Housing Group-Filter | 1 |
| 14***24 | Tube As | 1 |
| 14***27 | Tube As | 1 |
147-4155 Hydraulic Ar
| 09***97 | Washer, Spring | 4 |
| 14***85 | Tube As | 1 |
| 14***86 | Tube As | 1 |
132-1745 Installation Ar-Pilot Lines
| 09***97 | Washer, Spring | 4 |
| 13***45 | Installation Ar-Pilot Lines | 1 |
| 14***85 | Tube As | 1 |
159-7744 Lever Gp-Control
| 09***97 | Washer, Spring | 4 |
| 12***59 | Hose Assem. | 1 |
| 14***64 | Valve As-Manual; -Auxiliary, Shutoff | 2 |
131-9973 Lines Gp-Pilot
| 09***92 | Clamp, Single | 1 |
| 13***33 | Elbow | 1 |
| 13***73 | Lines | 1 |
153-8590 Lines Ar-Auxiliary Hydraulic
| 13***35 | Support As. | 1 |
| 14***23 | Tube As | 1 |
| 14***24 | Tube As | 1 |
146-1435 Lines Ar-Auxiliary Hydraulic
| 09***97 | Washer, Spring | 4 |
| 12***59 | Hose Assem. | 1 |
| 14***35 | Lines Ar-Auxiliary Hydraulic | 1 |
146-1436 Lines Ar-Auxiliary Hydraulic
| 09***97 | Washer, Spring | 4 |
| 14***83 | Tube As | 1 |
| 14***84 | Tube As | 1 |
153-8576 Lines Ar-Auxiliary Hydraulic
| 11***57 | Grommet | 13 |
| 11***58 | Grommet | 3 |
| 11***80 | Clip | 8 |
132-1744 Lines Gp-Auxiliary Hydraulic
| 13***35 | Support As. | 1 |
| 13***44 | Lines Group-Auxiliary Hydraulic; (Auxiliary Hydraulic) | 1 |
| 14***73 | Tube As | 1 |
146-1432 Lines Gp-Auxiliary Hydraulic
| 09***66 | Clamp | 4 |
| 11***05 | Valve Group-Check & Relief | 2 |
| 13***35 | Support As. | 4 |
153-8631 Lines Gp-Auxiliary Hydraulic
| 15***31 | Lines Group-Auxiliary Hydraulic | 1 |
| 19***04 | Seal-O-Ring; (Id=18.94mm) | 2 |
| 22***92 | Hose As | 2 |
153-8580 Lines Gp-Auxiliary Hydraulic
| 08***46 | Connector | 2 |
| 09***92 | Seal-O-Ring (Id=23.70mm) | 2 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
146-1431 Lines Gp-Auxiliary Hydraulic
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
| 09***92 | Seal-O-Ring (Id=23.70mm) | 2 |
| 09***97 | Washer, Spring | 2 |
153-8577 Lines Gp-Auxiliary Hydraulic
| 11***21 | Support As | 1 |
| 11***23 | Support As | 1 |
| 11***54 | Tube As | 1 |
146-7097 Lines Gp-Boom
| 14***97 | Lines Group-Boom | 1 |
| 15***76 | Hose As | 2 |
| 19***04 | Seal-O-Ring; (Id=18.94mm) | 2 |
146-7094 Lines Gp-Boom Cylinder
| 09***92 | Clamp, Single | 1 |
| 13***38 | Tube As | 1 |
| 13***42 | Support As | 1 |
147-5854 Lines Gp-Boom Cylinder
| 09***96 | Clamp, Double | 1 |
| 09***84 | Locknut; (M12x1.75-Thd) | 1 |
| 09***08 | Clamp | 1 |
151-1781 Lines Gp-Boom Cylinder
| 14***33 | Valve Group-Relief; (Line)(Variable Adjustable Boom) | 2 |
| 14***67 | Tube As | 1 |
| 14***68 | Tube As | 1 |
147-5855 Lines Gp-Boom Cylinder
| 09***93 | Clamp, Single | 1 |
| 10***60 | Valve Group-Relief; (Work Tool) | 1 |
| 13***41 | Plate | 1 |
146-7095 Lines Gp-Boom Cylinder
| 09***97 | Seal-O-Ring (Id=29.70mm) | 1 |
| 09***97 | Washer, Spring | 2 |
| 09***80 | Holder | 1 |
146-7099 Lines Gp-Bucket Cylinder
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
| 09***61 | Strap; (Cable) | 4 |
| 10***28 | Elbow; (Swivel) | 2 |
115-8906 Lines Gp-Bucket Cylinder
| 09***91 | Clamp, Single | 3 |
| 09***93 | Clamp, Single | 1 |
| 11***00 | Hose Assem. | 1 |
146-7100 Lines Gp-Bucket Cylinder
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 10 |
| 03***55 | Tee-Flared | 1 |
| 08***56 | 90 Degrees Elbow | 1 |
118-3968 Lines Gp-Bucket Cylinder
| 09***91 | Clamp, Single | 3 |
| 11***00 | Hose Assem. | 1 |
| 11***68 | Lines Group-Bucket Cylinder; (Bucket Cylinder) | 1 |
147-5857 Lines Gp-Bucket Cylinder
| 00***62 | Elbow (To Primary Filter Base) | 2 |
| 03***78 | Connector-Filtered Fuel To Adapter | 2 |
| 03***42 | Elbow Hose Assembly To | 1 |
146-7101 Lines Gp-Bucket Cylinder
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 10 |
| 03***55 | Tee-Flared | 1 |
| 08***56 | 90 Degrees Elbow | 1 |
131-9967 Lines Gp-Front
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 7 |
| 10***76 | Hose As (Nom 06, L=1350mm) | 1 |
| 10***59 | Hose As (Nom 06, L=1450mm) | 2 |
131-9952 Lines Gp-Front
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
| 06***58 | Tee Hose Assembly To | 1 |
| 10***80 | Hose As (Nom 06, L=1560mm) | 1 |
131-9969 Lines Gp-Front
| 03***36 | Connector-O-Ring | 1 |
| 03***42 | Elbow Hose Assembly To | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
131-9971 Lines Gp-Front
| 03***36 | Connector-O-Ring | 1 |
| 03***42 | Elbow Hose Assembly To | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
131-9974 Lines Gp-Front
| 03***36 | Connector-O-Ring | 1 |
| 03***42 | Elbow Hose Assembly To | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 5 |
146-7081 Lines Gp-Motor
| 03***78 | Connector-Filtered Fuel To Adapter | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 5 |
| 10***39 | Hose As (Nom 12, L=1030mm) | 1 |
131-9956 Lines Gp-Pilot
| 13***89 | Hose | 1 |
| 13***56 | Lines Group-Pilot | 1 |
| 13***84 | Pipe As | 1 |
131-9968 Lines Gp-Pilot
| 12***99 | Hose Assem. | 1 |
| 12***00 | Flange-Special | 1 |
| 12***01 | Flange; (Special) | 1 |
131-9975 Lines Gp-Pilot
| 09***92 | Seal-O-Ring (Id=23.70mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
131-9955 Lines Gp-Pilot
| 00***62 | Elbow (To Primary Filter Base) | 2 |
| 03***78 | Connector-Filtered Fuel To Adapter | 2 |
| 03***42 | Elbow Hose Assembly To | 1 |
131-9959 Lines Gp-Pilot
| 10***72 | Tee-O-Ring Port | 1 |
| 10***73 | Tee-O-Ring Port | 1 |
| 10***30 | Hose Assem. | 1 |
131-9970 Lines Gp-Pilot
| 13***43 | Block | 1 |
| 13***70 | Lines Group-Pilot; (Pilot) | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 3 |
184-9591 Lines Gp-Pilot
| 09***61 | Strap; (Cable) | 1 |
| 10***97 | Pipe As | 1 |
| 18***91 | Lines Group-Pilot | 1 |
131-9965 Lines Gp-Pilot -2 Ways
| 12***99 | Hose Assem. | 1 |
| 12***00 | Flange-Special | 1 |
| 12***01 | Flange; (Special) | 1 |
131-9972 Lines Gp-Pilot
| 13***43 | Block | 1 |
| 13***72 | Lines Group-Pilot; (Pilot) | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 3 |
168-9384 Lines Gp-Pump
| 16***84 | Lines Group-Pump | 1 |
| 16***21 | Hose Assem. | 1 |
| 17***17 | Hose As | 1 |
168-9385 Lines Gp-Return & Filter
| 09***07 | Bolt; (M16x2x120-mm) | 3 |
| 09***85 | Seal - O-Ring (179.3 mm Id) | 1 |
| 13***18 | Valve Group-Travel Counterbalance | 1 |
151-1782 Lines Gp-Return & Filter
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***92 | Seal-O-Ring (Id=23.70mm) | 1 |
| 09***95 | Spring, Relief | 1 |
151-1809 Lines Gp-Stick
| 08***28 | Plate-Cam | 1 |
| 08***29 | Shaft-Drive | 1 |
| 08***43 | Stopper | 2 |
146-7098 Lines Gp-Stick
| 08***28 | Plate-Cam | 1 |
| 08***29 | Shaft-Drive | 1 |
| 08***42 | Valve | 1 |
146-7096 Lines Gp-Stick Cylinder
| 08***42 | Valve | 1 |
| 08***43 | Stopper | 2 |
| 08***57 | Piston | 2 |
147-5856 Lines Gp-Stick Cylinder
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 2 |
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 2 |
102-3837 Lines Gp-Stick Drain
| 10***37 | Lines Group-Stick Drain | 1 |
| 14***62 | Bracket As | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 4 |
104-9158 Lines Gp-Swing Motor
| 10***58 | Cover | 1 |
| 10***58 | Lines Group-Swing Motor | 1 |
| 16***88 | Coupling Group-Pump | 1 |
111-9950 Manifold Gp-Control -Pilot Manifold
| 09***63 | Seal-O-Ring (Id=54.40mm) | 1 |
| 11***50 | Manifold Group-Control; -Pilot Manifold | 1 |
| 17***50 | Pump Group-Piston | 1 |
114-0484 Motor Gp-Travel
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***83 | Ring-Back Up | 1 |
| 09***37 | Ring-Retaining | 1 |
107-7028 Motor & Mtg Gp-Travel
| 09***82 | Pin-Spring | 4 |
| 09***09 | Nut; (M16x2.0 Thd) | 4 |
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 1 |
209-5994 Motor Gp-Piston -Travel
| 13***62 | Tank & Filter Group-Hydraulic | 1 |
| 14***92 | Spacer | 6 |
| 20***94 | Motor Group-Piston; -Travel | 1 |
107-7029 Motor Gp-Piston
| 09***52 | Seal-O-Ring (Id=74.60mm) | 1 |
| 09***39 | Spring | 1 |
| 09***41 | Holder, Guide | 1 |
209-5992 Motor Gp-Piston -Travel
| 03***89 | Connector-Flared | 2 |
| 03***94 | Connector-Flared | 1 |
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
137-3722 Motor Gp-Piston
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 13***22 | Motor Group-Piston; (Travel) | 1 |
165-9313 Motor Gp-Swing
| 11***84 | Valve Group-Pilot; -Alt Pattern Control, 2-Way | 1 |
| 12***00 | Film Group; -Alternate Pattern Control | 1 |
| 13***65 | Lines Group-Pilot; -2 Ways | 1 |
215-9952 Motor Gp-Travel
| 11***47 | Handle | 1 |
| 21***52 | Motor Group-Travel | 1 |
| 23***62 | Valve As | 1 |
146-7161 Mounting Gp-Valve
| 14***61 | Mounting Group-Valve | 1 |
| 30***66 | Handle | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
162-6287 Pump & Mtg Gp-Main Hydraulic
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***80 | Seal-O-Ring (Id=11.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
165-9268 Pump Gp-Main Hydraulic
| 09***53 | Poppet | 1 |
| 09***54 | Spring | 1 |
| 16***68 | Pump Group-Main Hydraulic | 1 |
170-9953 Pump Gp-Main Hydraulic
| 10***60 | Valve | 1 |
| 10***61 | Spring | 1 |
| 17***53 | Diode, Pump Group-Main Hydraulic | 1 |
170-9950 Pump Gp-Piston
| 10***30 | Cover | 1 |
| 17***50 | Pump Group-Piston | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
107-6418 Screen Gp-Hydraulic
| 10***18 | Screen Group-Hydraulic | 1 |
| 12***96 | Ring | 1 |
| 12***97 | Valve Assem. | 1 |
162-4696 Swivel Gp
| 12***98 | Valve Assem. | 1 |
| 16***96 | Swivel Group | 1 |
| 18***58 | Ring | 1 |
131-9862 Tank & Filter Gp-Hydraulic
| 09***71 | Seal-O-Ring (Id=2.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
| 09***00 | Seal-O-Ring (Id=33.70mm) | 1 |
144-9355 Tank & Mtg Gp-Hydraulic
| 13***27 | Spring | 1 |
| 14***19 | Spool | 1 |
| 14***55 | Tank & Mtg Group-Hydraulic | 1 |
131-9861 Tank & Mtg Gp-Hydraulic
| 11***58 | Body; (Valve) | 1 |
| 13***61 | Tank & Mtg Group-Hydraulic | 1 |
| 13***51 | Spool As | 1 |
131-5806 Valve Ar-Alt Pattern Control
| 13***06 | Valve Ar-Alt Pattern Control | 1 |
| 13***25 | Spring | 1 |
| 13***26 | Spring | 1 |
153-5252 Valve Ar-Boom Lowering Control
| 14***69 | Spool | 1 |
| 15***52 | Valve Ar-Boom Lowering Control | 1 |
| 7I***01 | Bolt-Shoulder | 1 |
4i-6264 Valve As-Manual
| 14***74 | Spring | 1 |
| 14***79 | Spool | 1 |
| 4I***64 | Valve As-Manual; (Lower Pump Shut-Off) | 1 |
146-1464 Valve As-Manual
| 11***67 | Spool | 1 |
| 13***25 | Spring | 1 |
| 13***26 | Spring | 1 |
282-5894 Valve As-Manual -Auxiliary, Shutoff
| 13***25 | Spring | 1 |
| 13***26 | Spring | 1 |
| 15***81 | Spool As | 1 |
191-3149 Valve As-Manual
| 13***25 | Spring | 1 |
| 13***26 | Spring | 1 |
| 15***79 | Spool As | 1 |
5i-7083 Valve As-Relief
| 13***25 | Spring | 1 |
| 13***26 | Spring | 1 |
| 15***85 | Spool | 1 |
185-9063 Valve Gp-Check
| 09***65 | Plug, Tapered | 10 |
| 09***66 | Plug, Tapered | 1 |
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 5 |
7i-7490 Valve Gp-Check
| 09***22 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***65 | Spring | 2 |
140-0663 Valve Gp-Check
| 09***65 | Plug, Tapered | 10 |
| 09***66 | Plug, Tapered | 1 |
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 5 |
7i-1285 Valve Gp-Check
| 13***27 | Spring | 1 |
| 19***28 | Spool | 1 |
| 7I***85 | Valve Group-Check | 1 |
7i-7496 Valve Gp-Check
| 09***19 | Ring-Retaining | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 11***34 | Seal-O-Ring | 3 |
118-4205 Valve Gp-Check & Relief
| 09***65 | Plug, Tapered | 10 |
| 09***66 | Plug, Tapered | 1 |
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 5 |
147-4141 Valve Gp-Control
| 08***48 | Bolt-Socket Head; (M8x1.25x30-mm)(M8x1.25x30mm) | 2 |
| 08***03 | Plug | 2 |
| 08***04 | Rod | 2 |
158-8178 Valve Gp-Control
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 1 |
| 09***76 | Nut; (M14x2-Thd) | 1 |
| 10***73 | Valve | 1 |
137-3725 Valve Gp-Control
| 11***83 | Seal-Rubber | 1 |
| 13***25 | Valve Group-Control; -Travel Counterbalance | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 4 |
147-4168 Valve Gp-Control
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
147-4178 Valve Gp-Control
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
158-8184 Valve Gp-Control
| 09***73 | Seal-O-Ring (Id=5.80mm) | 2 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 10 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
158-8180 Valve Gp-Control
| 09***73 | Seal-O-Ring (Id=5.80mm) | 3 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 9 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
147-4226 Valve Gp-Control
| 11***83 | Seal-Rubber | 1 |
| 14***26 | Valve Group-Control; (Work Tool)(Option) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 4 |
140-0818 Valve Gp-Control
| 09***75 | Spring | 1 |
| 09***76 | Guide, Spring | 1 |
| 11***20 | Valve Group-Pilot | 1 |
194-9827 Valve Gp-Control -Boom 2
| 08***92 | Retainer | 1 |
| 08***20 | Body | 1 |
| 09***73 | Spring | 1 |
105-7267 Valve Gp-Flow Control
| 09***14 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
171-0189 Valve Gp-Flow Control
| 09***86 | Seal - O-Ring (19.80 mm Id) | 3 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***85 | Ring; (Back Up) | 3 |
185-0419 Valve Gp-Main Control
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
158-8142 Valve Gp-Main Control
| 09***14 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
118-5984 Valve Gp-Pilot -Alt Pattern Control, 2-Way
| 10***62 | Cover | 1 |
| 10***63 | Cover | 1 |
| 10***64 | Spring, Adjustment-Tilting | 1 |
285-1765 Valve Gp-Pilot -Alt Pattern Control, 2-Way
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
119-5219 Valve Gp-Pilot
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
123-2604 Valve Gp-Pilot
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
131-5776 Valve Gp-Pilot
| 13***45 | Valve Group-Solenoid; (Solenoid) | 1 |
| 13***60 | Valve Group-Solenoid; (Solenoid) | 1 |
| 13***76 | Valve Group-Pilot; (Travel Control) | 1 |
176-4984 Valve Gp-Pilot
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
102-0871 Valve Gp-Pilot Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
170-9952 Valve Gp-Pump Control
| 09***01 | Seal-O-Ring (Id=39.40mm) | 2 |
| 11***60 | Cover | 2 |
| 11***62 | Spring | 2 |
170-9951 Valve Gp-Pump Control
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 13***38 | Body | 1 |
| 13***39 | Orifice | 1 |
129-8030 Valve Gp-Relief
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
140-0634 Valve Gp-Relief
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 08***40 | Plate | 4 |
| 11***77 | Hose As | 1 |
206-3216 Valve Gp-Relief
| 11***66 | Cylinder & Lines Group-Bucket; (Bucket) | 1 |
| 13***33 | Linkage Group-Bucket; (Bucket) | 1 |
| 20***16 | Valve Group-Relief | 1 |
085-8724 Valve Gp-Relief
| 08***24 | Valve Group-Relief; -1-Way Flow-Line | 1 |
| 14***72 | Lighting Group-Boom | 1 |
| 14***97 | Lines Group-Boom | 1 |
140-0633 Valve Gp-Relief
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
105-7460 Valve Gp-Relief
| 10***60 | Valve Group-Relief; (Work Tool) | 1 |
| 14***72 | Lighting Group-Boom | 1 |
| 14***97 | Lines Group-Boom | 1 |
107-7058 Valve Gp-Selector
| 10***58 | Valve Group-Selector; -Hydraulic Activation Control | 1 |
| 13***33 | Linkage Group-Bucket; (Bucket) | 2 |
| 14***61 | Cylinder & Lines Group-Bucket | 2 |
121-1491 Valve Gp-Solenoid
| 08***03 | Bucket Link As | 1 |
| 08***05 | . Head; Cyl., Pin | 2 |
| 08***06 | Pin | 1 |
131-5760 Valve Gp-Solenoid
| 13***60 | Valve Group-Solenoid; (Solenoid) | 1 |
| 14***98 | Lines Group-Stick | 1 |
| 14***90 | Stick Group-Hoe | 1 |
111-9916 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 13***33 | Linkage Group-Bucket; (Bucket) | 1 |
| 14***72 | Cylinder & Lines Group-Bucket | 1 |
137-3637 Valve Gp-Solenoid
| 13***37 | Valve Group-Solenoid | 1 |
| 14***99 | Lines Group-Bucket Cylinder | 1 |
| 14***93 | Stick Group-Hoe | 1 |
121-1490 Valve Gp-Solenoid
| 11***66 | Cylinder & Lines Group-Bucket; (Bucket) | 1 |
| 12***90 | Valve Group-Solenoid; -Travel | 1 |
| 13***33 | Linkage Group-Bucket; (Bucket) | 1 |
131-5745 Valve Gp-Solenoid
| 13***45 | Valve Group-Solenoid; (Solenoid) | 1 |
| 15***80 | Lines Group-Auxiliary Hydraulic | 1 |
| 15***81 | Stick Group-Hoe | 1 |
137-3718 Valve Gp-Travel Counterbalance
| 13***18 | Valve Group-Travel Counterbalance | 1 |
| 14***00 | Lines Group-Bucket Cylinder | 1 |
| 14***96 | Stick Group-Hoe | 1 |
Implements
139-2992 Boom Ar-1 Piece Long
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
139-2980 Boom Ar-1 Piece Long
| 13***80 | Boom Ar-1 Piece Long | 1 |
| 15***09 | Lines Group-Stick | 1 |
| 15***75 | Stick Group-Hoe | 1 |
146-1437 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
147-4087 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
147-4101 Lines Gp-Grease
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
139-3032 Linkage Ar-Bucket
| 08***21 | Shim (0.5mm Thick) | 4 |
| 08***22 | Shim (1.0mm Thick) | 6 |
| 13***48 | Plate | 1 |
139-2986 Linkage Ar-Bucket
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
139-3017 Linkage Ar-Bucket
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
117-4142 Linkage Ar-Bucket -B-Family
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
139-2993 Linkage Ar-Bucket
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
133-2433 Linkage Gp-Bucket
| 13***33 | Linkage Group-Bucket; (Bucket) | 1 |
| 17***79 | Bucket As-Heavy Duty | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
153-8579 Stick Ar
| 15***79 | Stick Ar | 1 |
| 18***13 | Bucket As-Heavy Duty | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
139-2981 Stick Ar-Hoe
| 13***81 | Stick Ar-Hoe | 1 |
| 18***23 | Bucket As-Heavy Duty | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
139-2982 Stick Ar-Hoe
| 13***82 | Stick Ar-Hoe | 1 |
| 18***33 | Bucket As-Heavy Duty | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
139-3025 Stick Ar-Hoe
| 12***12 | Plate | 3 |
| 13***26 | Edge As | 1 |
| 13***25 | Stick Ar-Hoe | 1 |
139-2983 Stick Ar-Hoe
| 13***83 | Stick Ar-Hoe | 1 |
| 18***43 | Bucket As-Heavy Duty | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
153-8578 Stick Gp-Hoe
| 10***97 | Edge As | 1 |
| 15***78 | Stick Group-Hoe | 1 |
| 22***62 | Plate | 1 |
153-8581 Stick Gp-Hoe
| 10***96 | Edge As | 1 |
| 15***81 | Stick Group-Hoe | 1 |
| 18***56 | Plate | 1 |
153-1675 Stick Gp-Hoe
| 10***97 | Edge As | 1 |
| 12***42 | Plate | 3 |
| 15***75 | Stick Group-Hoe | 1 |
146-1439 Stick Gp-Hoe
| 13***26 | Edge As | 1 |
| 14***39 | Stick Group-Hoe | 1 |
| 21***08 | Plate | 1 |
147-4093 Stick Gp-Hoe
| 14***93 | Stick Group-Hoe | 1 |
| 18***17 | Edge As | 1 |
| 22***79 | Plate | 1 |
153-8632 Stick Gp-Hoe
| 10***96 | Edge As | 1 |
| 15***32 | Stick Group-Hoe | 1 |
| 22***53 | Plate | 1 |
147-4096 Stick Gp-Hoe
| 12***81 | Plate | 3 |
| 12***33 | Edge As | 1 |
| 14***96 | Stick Group-Hoe | 1 |
147-4090 Stick Gp-Hoe
| 14***90 | Stick Group-Hoe | 1 |
| 18***17 | Edge As | 1 |
| 18***20 | Plate | 1 |
Lubrication System
159-3125 Adapter Gp-Remote Oil Filter
| 09***28 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 10***74 | Bolt | 1 |
135-5710 Filter Gp-Engine Oil
| 13***10 | Filter Group-Engine Oil | 1 |
| 13***32 | Hose As | 1 |
| 13***33 | Hose As | 1 |
151-5283 Fumes Disposal Gp
| 15***81 | Hose; (Upper Fumes Disposal) | 1 |
| 15***83 | Fumes Disposal Group | 1 |
| 15***19 | Hose; (Lower Fumes Disposal) | 1 |
176-1634 Gauge Gp-Oil Level (Dipstick)
| 11***21 | Gauge-Oil Level (Dipstick) | 1 |
| 17***29 | Tube As-Guide | 1 |
| 17***34 | Gauge Group-Oil Level (Dipstick) | 1 |
116-6720 Gauge Gp-Oil Level (Dipstick)
| 11***20 | Gauge Group-Oil Level (Dipstick); (Oil Level) (Dipstick) | 1 |
| 11***18 | Tube As-Guide | 1 |
| 11***21 | Gauge-Oil Level (Dipstick) | 1 |
119-7218 Pump Gp-Engine Oil
| 09***21 | Seal-O-Ring (Id=19.08mm) | 1 |
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
Machine Arrangement
139-2977 Chassis Ar
| 12***40 | Guard Group-Bottom | 1 |
| 13***94 | Control Group-Governor | 1 |
| 13***89 | Tank & Mtg Group-Fuel | 1 |
139-2974 Chassis Ar
| 12***40 | Guard Group-Bottom | 1 |
| 13***94 | Control Group-Governor | 1 |
| 13***89 | Tank & Mtg Group-Fuel | 1 |
139-2972 General Ar
| 13***72 | General Ar | 1 |
| 13***77 | Chassis Ar | 1 |
| 13***79 | Frame Ar-Undercarriage | 1 |
139-2969 General Ar
| 13***69 | General Ar | 1 |
| 13***74 | Chassis Ar | 1 |
| 13***78 | Frame Ar-Undercarriage | 1 |
Operator Station
150-2234 Air Conditioner & Mounting Gp
| 08***29 | Spacer; (9x19x30-mm Thk) | 4 |
| 10***87 | Pulley | 1 |
| 13***31 | Guard As | 1 |
154-0715 Air Conditioner Ar
| 13***53 | Condenser Assem. | 1 |
| 15***15 | Air Conditioner Ar | 1 |
| 15***83 | Bracket As | 1 |
167-7167 Air Conditioner Ar
| 12***17 | Guard | 2 |
| 12***18 | Guard | 2 |
| 12***22 | Support | 2 |
147-4811 Air Conditioner Gp
| 11***14 | Panel | 1 |
| 11***56 | Support Assem. | 1 |
| 11***66 | Cover | 1 |
185-9193 Air Conditioner Gp
| 08***70 | Sleeve | 2 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
130-0250 Air Conditioner Gp
| 11***13 | Support | 1 |
| 11***16 | Cover | 1 |
| 11***67 | Cover | 1 |
147-4833 Blower Gp-Cab
| 08***70 | Sleeve | 2 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
6i-5444 Box Gp-Storage
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
119-6875 Cab Gp
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 1 |
| 11***75 | Cab Group | 1 |
| 12***11 | Pedal-Rubber; (Rh) | 1 |
155-7020 Cab Gp
| 09***92 | Locknut; (M6x1-Thd) | 1 |
| 10***89 | Nut Assem.; (M6x1) | 3 |
| 12***97 | Cap | 1 |
155-6995 Cab Gp
| 09***31 | Nut; (M12x1.75-Thd) | 2 |
| 09***32 | Knob; (Lh Travel Lever) | 1 |
| 09***33 | Knob; (Rh Travel Lever) | 1 |
155-7019 Cab Gp
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 15***19 | Cab Group | 1 |
| 15***40 | Cover-Monitor | 1 |
154-0692 Cab Gp
| 15***68 | Control Group-Travel | 1 |
| 15***69 | Control Group-Handle | 1 |
| 15***92 | Cab Group | 1 |
154-0674 Cab Gp
| 13***99 | Control Group-Handle; -Lh Joystick | 1 |
| 15***74 | Cab Group | 1 |
| 17***84 | Valve Group-Pilot; -Joystick-Implement, Swing | 1 |
151-6710 Cab Gp
| 13***00 | Control Group-Handle; -Rh Joystick | 1 |
| 15***10 | Cab Group | 1 |
| 17***84 | Valve Group-Pilot; -Joystick-Implement, Swing | 1 |
151-6618 Compressor Gp-Refrigerant
| 09***59 | Screw-Machine; (M6x1x3.4-mm) | 4 |
| 11***77 | Cover Group-Storage | 1 |
| 15***18 | Compressor Group-Refrigerant; (Refrigerant) | 1 |
156-6482 Condenser & Mtg Gp-Refrigerant
| 09***72 | Nut | 2 |
| 09***22 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 10***99 | Screw As; (M6x1x16-mm) | 8 |
155-7084 Console Gp-Operator -Rh
| 09***07 | Grommet | 1 |
| 11***33 | Cover | 1 |
| 11***06 | Switch; (Window Lower Limit) | 2 |
155-7008 Console Gp-Operator -Lh
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 1 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 1 |
| 09***22 | Screw-Machine; (M4x0.7x8-mm) | 2 |
111-6278 Console Gp-Operator
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 1 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 1 |
| 09***22 | Screw-Machine; (M4x0.7x8-mm) | 2 |
154-0569 Control Gp-Handle
| 11***89 | Rubber; (Cushion) | 1 |
| 13***76 | Duct-Heater | 1 |
| 15***69 | Control Group-Handle | 1 |
133-7899 Control Gp-Handle
| 12***21 | Stopper | 2 |
| 12***23 | Mounting Group-Window Drive | 1 |
| 13***99 | Control Group-Handle; -Lh Joystick | 1 |
133-7900 Control Gp-Handle
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 1 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 1 |
| 10***99 | Screw As; (M6x1x16-mm) | 4 |
111-6428 Control Gp-Hydraulic Pedal -Auxiliary
| 10***33 | Insulator | 2 |
| 10***34 | Insulator | 1 |
| 11***28 | Control Group-Hydraulic Pedal; -Auxiliary | 1 |
176-4985 Control Gp-Joystick -Rh
| 11***12 | Duct | 1 |
| 12***89 | Cover | 1 |
| 13***77 | Duct As-Defrost | 1 |
176-4986 Control Gp-Joystick -Lh
| 12***07 | Guard Group-Vandalism | 1 |
| 13***94 | Box & Mtg Group-Tool; (Storage) | 1 |
| 17***86 | Control Group-Joystick; -Lh-Stick & Swing | 1 |
111-6284 Control Gp-Pilot Operated Hyd
| 11***84 | Control Group-Pilot Operated Hydraulic | 1 |
| 11***21 | Guard Group-Vandalism | 1 |
| 13***94 | Box & Mtg Group-Tool; (Storage) | 1 |
154-0568 Control Gp-Travel
| 12***75 | Frame As | 1 |
| 15***68 | Control Group-Travel | 1 |
| 4I***02 | Boss; (M12x1.75x20-mm) | 6 |
155-7039 Cover Gp-Console
| 12***95 | Pin | 4 |
| 12***96 | Pin | 1 |
| 12***11 | Pin | 1 |
155-7027 Cover Gp-Storage
| 09***06 | Spring As; (Gas) | 2 |
| 15***27 | Cover Group-Storage | 1 |
| 2Y***85 | Ring (Retaining) | 4 |
111-6277 Cover Gp-Storage
| 11***77 | Cover Group-Storage | 1 |
| 12***95 | Pin | 6 |
| 12***96 | Pin | 1 |
155-7053 Door Gp-Cab
| 09***06 | Spring As; (Gas) | 2 |
| 12***57 | Cover Assem. | 1 |
| 15***53 | Door Group-Cab | 1 |
4i-6974 Door Gp-Cab
| 08***49 | Packing | 3 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 6 |
| 10***00 | Screw As; (M6x1x20-mm) | 2 |
155-7054 Door Gp-Cab
| 15***54 | Door Group-Cab | 1 |
122-9646 Drive Gp-Window
| 12***46 | Drive Group-Window | 1 |
| 15***82 | Heater & Mtg Group-Cab | 1 |
| 15***23 | Lines Group-Heater | 1 |
117-6263 Drive Gp-Window
| 11***63 | Drive Group-Window; (Windshield) (Auto) | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
| 12***24 | Hose | 1 |
128-2150 Duct Gp-Air
| 12***50 | Duct Group-Air | 1 |
| 14***13 | Core As-Heater | 1 |
| 14***21 | Clip | 1 |
128-2149 Duct Gp-Cab Air
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 1 |
| 09***92 | Washer, Tooth | 1 |
| 12***49 | Duct Group-Cab Air | 1 |
139-7150 Duct Gp-Cab Air
| 12***48 | Duct Group-Defroster | 1 |
| 12***49 | Duct Group-Cab Air | 1 |
| 12***50 | Duct Group-Air | 1 |
128-2148 Duct Gp-Defroster
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 12***48 | Duct Group-Defroster | 1 |
132-4053 Guard Ar-Vandalism
| 09***64 | Grommet | 1 |
| 09***61 | Strap; (Cable) | 2 |
| 11***97 | Receiver Assem. | 1 |
132-4052 Guard Ar-Vandalism
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***66 | Sensor Group-Speed; (Engine) | 1 |
| 12***68 | Gasket | 1 |
128-2156 Guard Gp-Front Window
| 09***64 | Grommet | 1 |
| 09***61 | Strap; (Cable) | 3 |
| 11***97 | Receiver Assem. | 1 |
124-4007 Guard Gp-Vandalism
| 09***45 | Cable; (Lanyard) | 1 |
| 12***07 | Guard Group-Vandalism | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
111-6321 Guard Gp-Vandalism
| 09***61 | Strap; (Cable) | 4 |
| 11***21 | Guard Group-Vandalism | 1 |
| 12***05 | Joint | 2 |
4i-1273 Hatch Gp-Roof
| 12***11 | Mirror | 1 |
| 15***04 | Support Assem. | 1 |
| 15***42 | Bar Assem. | 1 |
124-3933 Hatch Gp-Roof
| 11***36 | Clip | 2 |
| 11***46 | Cable | 1 |
| 12***33 | Hatch Group-Roof | 1 |
4i-4204 Hatch Gp-Roof
| 15***85 | Monitor Group; (Operator) | 1 |
| 15***22 | Kit; (Backup Alarm) | 1 |
| 4I***04 | Hatch Group-Roof | 1 |
122-9648 Headrest As-Seat
| 12***48 | Headrest As-Seat | 1 |
| 12***59 | Rail; (R.H.) | 1 |
| 12***60 | Block | 8 |
151-9682 Heater & Mtg Gp-Cab
| 10***76 | Monitor & Mtg Group-Operator | 1 |
| 11***78 | Console Group-Operator | 1 |
| 11***81 | Support Group-Seat | 1 |
185-9196 Heater Ar-Cab
| 10***76 | Monitor & Mtg Group-Operator | 1 |
| 11***78 | Console Group-Operator | 1 |
| 11***81 | Support Group-Seat | 1 |
139-7258 Heater Gp-Cab
| 11***07 | Grommet | 1 |
| 12***59 | Grommet | 2 |
| 12***26 | Mount Assem. | 4 |
147-4854 Heater Gp-Cab
| 14***65 | Wiring Group-Console; (Console) | 1 |
| 14***67 | Wiring Group-Radio | 1 |
| 14***54 | Heater Group-Cab | 1 |
151-9678 Heater Gp-Cab
| 15***78 | Heater Group-Cab | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
4i-5408 Horn Gp-Electric
| 11***83 | Seat Group | 1 |
| 12***25 | Seat Belt Group; -Retractable, 3-In | 1 |
| 4I***08 | Horn Group-Electric | 1 |
5i-8159 Instrument Gp
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 11***91 | Suspension Group-Seat | 1 |
| 15***17 | Seat Group-Suspension | 1 |
167-7168 Lines Gp-Air Conditioner
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 12***26 | Suspension Group-Seat | 1 |
| 15***00 | Seat Group | 1 |
156-6488 Lines Gp-Air Conditioner
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 12***47 | Support Group-Seat | 1 |
| 15***99 | Seat Group | 1 |
156-6523 Lines Gp-Heater
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
7y-0059 Literature Gp
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
| 13***33 | Kit-Headrest; (Seat) | 1 |
| 13***34 | Kit-Frame; (Seat) | 1 |
151-9670 Mirror Gp-Rear View
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
106-0176 Monitor & Mtg Gp-Operator
| 09***27 | Screw-Machine; (M4x0.7x12-mm) | 8 |
| 10***76 | Monitor & Mtg Group-Operator | 1 |
| 11***10 | Bracket Assem. | 4 |
150-7029 Mounting Gp-Radio
| 13***14 | Support As; (Seat) | 1 |
| 15***29 | Mounting Group-Radio | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
128-2123 Mounting Gp-Window Drive
| 12***04 | Plate | 2 |
| 12***23 | Mounting Group-Window Drive | 1 |
| 13***44 | Support Kit | 1 |
139-7177 Operator Ar
| 11***66 | Kit-Stop; (Seat) | 1 |
| 12***04 | Plate | 2 |
| 13***21 | Kit-Damper; (Seat) | 1 |
185-9194 Operator Ar
| 11***66 | Kit-Stop; (Seat) | 1 |
| 12***04 | Plate | 2 |
| 13***21 | Kit-Damper; (Seat) | 1 |
154-0591 Platform Gp-Operator
| 15***91 | Platform Group-Operator | 1 |
| 3W***98 | Cap; (Window Washer Tank Fill) | 1 |
| 3W***99 | Packing | 1 |
140-0858 Radio Gp
| 14***58 | Radio Group; (Am/Fm) | 1 |
| 3W***98 | Cap; (Window Washer Tank Fill) | 1 |
| 3W***99 | Packing | 1 |
122-9625 Seat Belt Gp -Retractable, 3-In
| 12***25 | Seat Belt Group; -Retractable, 3-In | 1 |
| 12***52 | Visor | 1 |
| 12***60 | Support Assem. | 1 |
150-2199 Seat Gp
| 08***44 | Latch Group-Front Window | 2 |
| 08***47 | Retainer | 1 |
| 08***48 | Screw-Tapping | 2 |
111-6282 Seat Gp
| 11***82 | Seat Group | 1 |
| 15***57 | Visor | 1 |
| 3E***68 | Trim-Bulk (131cm) | 1 |
124-3925 Seat Gp
| 11***62 | Window Group-Power | 1 |
| 11***63 | Drive Group-Window; (Windshield) (Auto) | 1 |
| 11***64 | Control & Mtg Group-Power Window | 1 |
150-2200 Seat Gp
| 08***44 | Latch Group-Front Window | 2 |
| 08***47 | Retainer | 1 |
| 08***48 | Screw-Tapping | 2 |
119-6852 Seat Gp
| 09***61 | Strap; (Cable) | 4 |
| 10***29 | Nozzle As-Washer | 1 |
| 11***52 | Seat Group | 1 |
111-6283 Seat Gp
| 11***83 | Seat Group | 1 |
| 13***90 | Support | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
151-9617 Seat Gp-Suspension
| 10***81 | Screw-Truss Head | 2 |
| 10***88 | Knob | 1 |
| 12***35 | Liner | 1 |
150-7030 Speaker Gp-Radio
| 09***85 | Rubber, Cap; (Cap) | 2 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 17 |
| 12***67 | Glass (Upper) | 1 |
122-9647 Support Gp-Seat
| 09***85 | Rubber, Cap; (Cap) | 2 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 17 |
| 12***47 | Support Group-Seat | 1 |
111-6281 Support Gp-Seat
| 10***81 | Screw-Truss Head | 2 |
| 10***88 | Knob | 1 |
| 11***81 | Support Group-Seat | 1 |
111-6391 Suspension Gp-Seat
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 17 |
| 11***91 | Suspension Group-Seat | 1 |
| 12***67 | Glass (Upper) | 1 |
124-3926 Suspension Gp-Seat
| 09***61 | Strap; (Cable) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
4i-0559 Tank As-Window Washer
| 11***95 | Wiring Group-Window Wiper | 1 |
| 12***38 | Wiper & Washer Group-Window; -Lower | 1 |
| 14***68 | Washer Group-Window | 1 |
8r-1774 Tank Gp-Window Washer
| 12***02 | Arm As-Wiper | 1 |
| 12***03 | Motor As-Window Wiper | 1 |
| 12***20 | Arm Assem. | 1 |
111-6313 Visor Gp-Cab
| 11***13 | Visor Group-Cab | 1 |
| 12***02 | Arm As-Wiper | 1 |
| 12***03 | Motor As-Window Wiper | 1 |
6i-5387 Visor Gp-Protection
| 4I***85 | Case | 1 |
| 6I***87 | Visor Group-Protection | 1 |
| 7I***55 | Film-Warning; (Control Pattern Change)(English) | 1 |
147-4866 Washer Gp-Window
| 12***51 | Film-Instruction; (Operator Control Pedals)(Operator Controls) | 1 |
| 14***66 | Washer Group-Window | 1 |
| 7I***65 | Film-Notice; (Hammer, Read Omm)(English) | 1 |
147-4868 Washer Gp-Window
| 12***51 | Film-Instruction; (Operator Control Pedals)(Operator Controls) | 1 |
| 14***68 | Washer Group-Window | 1 |
184-3965 Window Ar-Cab
| 12***51 | Film-Instruction; (Operator Control Pedals)(Operator Controls) | 1 |
| 18***65 | Window Ar-Cab | 1 |
| 7I***65 | Film-Notice; (Hammer, Read Omm)(English) | 1 |
111-6310 Window Ar-Power
| 11***10 | Window Ar-Power | 1 |
| 13***97 | Film (Stripe) | 1 |
| 13***98 | Film (Stripe) | 1 |
4i-6966 Window Gp-Door
| 12***32 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***41 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 13***68 | Film-Warning; (Front Window) | 1 |
184-4003 Window Gp-Cab
| 12***31 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***40 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 13***67 | Film-Warning; (Window Latch) | 1 |
184-3966 Window Gp-Cab -Rear
| 12***30 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***39 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 13***66 | Film-Warning; (Front Window) | 1 |
155-7058 Window Gp-Door
| 12***33 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***42 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 13***69 | Film-Warning; (Front Window) | 1 |
124-3963 Window Gp-Front
| 12***35 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***63 | Window Group-Front | 1 |
| 12***44 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
111-6273 Window Gp-Front
| 11***73 | Window Group-Front | 1 |
| 12***34 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***43 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
155-7043 Window Gp-Front
| 12***37 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***45 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 13***71 | Film-Warning; (Automatic Windshield Lock) | 1 |
155-7045 Window Gp-Front
| 12***38 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 12***46 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 13***73 | Film-Warning; (Automatic Windshield Lock) | 1 |
117-6262 Window Gp-Power
| 09***37 | Thread | 1 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 10***45 | Film-Identification; (Cat) | 1 |
128-2138 Wiper & Washer Gp-Window -Lower
| 09***37 | Thread | 1 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 10***45 | Film-Identification; (Cat) | 1 |
147-4867 Wiper Ar-Window
| 10***95 | Tool Group | 1 |
| 13***83 | Mounting Group-Grease Gun; (Grease Gun) | 1 |
| 14***67 | Wiper Ar-Window | 1 |
111-6272 Wiper Gp-Window
| 11***72 | Wiper Group-Window | 1 |
155-7041 Wiper Gp-Window
| 15***41 | Wiper Group-Window | 1 |
Power Train
114-1484 Drive Gp-Final
| 09***80 | Plate (10.0 mm Thick) | 1 |
| 09***11 | Washer; (47.3x76x1-mm Thk) | 6 |
| 09***16 | Bearing As; (Roller) | 3 |
114-1483 Final Drive Gp
| 10***28 | Motor & Mtg Group-Travel | 1 |
| 11***83 | Final Drive Group | 1 |
| 11***84 | Final Drive Group | 1 |
148-4742 Power Train Ar
| 11***83 | Final Drive Group | 2 |
| 13***85 | Fastener Group-Swing & Final Dr | 1 |
| 14***30 | Drive Group-Swing | 1 |
7y-1605 Sprocket Gp
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 16 |
| 7Y***05 | Sprocket Group-Nonsegmented | 1 |
| 8E***05 | Sprocket-Track | 1 |
Service Equipment And Supplies
132-4143 Film Gp
| 13***43 | Film Group; (311b) | 1 |
184-4004 Film Gp -Cab Window, Rear
| 18***04 | Film Group; -Cab Window, Rear | 1 |
120-5100 Film Gp -Alternate Pattern Control
| 12***00 | Film Group; -Alternate Pattern Control | 1 |
144-9113 Film Gp
| 14***13 | Film Group | 1 |
132-4144 Film Gp
| 13***44 | Film Group | 1 |
132-4142 Film Gp
| 13***42 | Film Group | 1 |
144-9117 Plate & Film Gp
| 14***17 | Plate & Film Group | 1 |
132-4148 Plate & Film Gp
| 13***48 | Plate & Film Group | 1 |
132-4150 Plate & Film Gp
| 13***50 | Plate & Film Group | 1 |
132-4145 Plate & Film Gp
| 13***45 | Plate & Film Group | 1 |
132-4146 Plate & Film Gp
| 13***46 | Plate & Film Group | 1 |
144-9115 Plate & Film Gp
| 14***15 | Plate & Film Group | 1 |
132-4147 Plate & Film Gp
| 13***47 | Plate & Film Group | 1 |
132-4149 Plate & Film Gp
| 13***49 | Plate & Film Group | 1 |
132-4151 Plate & Film Gp
| 13***51 | Plate & Film Group | 1 |
132-4152 Plate & Film Gp
| 13***52 | Plate & Film Group | 1 |
132-4182 Tool Ar
| 13***82 | Tool Ar | 1 |
Undercarriage
139-2979 Frame Ar-Undercarriage
| 08***08 | Guard Group-Track Guide; -Center | 2 |
| 10***35 | Gear & Bearing Group-Swing | 1 |
| 11***90 | Guard Group-Travel Motor | 1 |
139-2978 Frame Ar-Undercarriage
| 08***08 | Guard Group-Track Guide; -Center | 2 |
| 10***35 | Gear & Bearing Group-Swing | 1 |
| 11***90 | Guard Group-Travel Motor | 1 |
148-3112 Frame As-Undercarriage
| 10***49 | Plate | 8 |
| 11***78 | Frame As-Track Roller; (Lh)(Lh) | 1 |
| 11***79 | Frame As-Track Roller; (Rh)(Rh) | 1 |
141-3831 Frame As-Undercarriage
| 10***49 | Plate | 8 |
| 11***78 | Frame As-Track Roller; (Lh)(Lh) | 1 |
| 11***79 | Frame As-Track Roller; (Rh)(Rh) | 1 |
087-5908 Guard Gp-Track Guide -Center
| 08***08 | Guard Group-Track Guide; -Center | 1 |
| 24***88 | Guard As-Track Guide | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 4 |
120-7165 Guard Gp-Track Guide -Full Length
| 12***65 | Guard Group-Track Guide; -Full Length | 1 |
| 21***68 | Guard As-Track Guide | 4 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 24 |
120-7164 Guard Gp-Track Guide -Rear
| 12***64 | Guard Group-Track Guide; -Rear | 1 |
| 21***68 | Guard As-Track Guide | 2 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 12 |
117-5490 Guard Gp-Travel Motor
| 11***90 | Guard Group-Travel Motor | 1 |
| 12***87 | Cover | 1 |
| 12***36 | Cover | 1 |
145-2971 Idler Gp-Front
| 14***71 | Idler Group-Front | 1 |
| 14***72 | Idler Group-Front | 1 |
| 14***73 | Idler Group-Front | 1 |
113-2907 Idler Gp-Front
| 11***07 | Idler Group-Front; (Front) (C) | 1 |
| 11***26 | Idler & Bearing As | 1 |
| 23***62 | Bearing; (Front Idler) | 2 |
145-2972 Idler Gp-Front
| 11***07 | Idler Group-Front; (Front) (C) | 1 |
| 14***72 | Idler Group-Front | 1 |
| 14***74 | Track Adjuster & Recoil Group | 1 |
248-7143 Idler Gp-Front
| 09***55 | Ring-Toric | 2 |
| 23***62 | Bearing; (Front Idler) | 2 |
| 24***25 | Shaft | 1 |
145-2973 Idler Gp-Front
| 11***07 | Idler Group-Front; (Front) (C) | 1 |
| 14***73 | Idler Group-Front | 1 |
| 14***75 | Track Adjuster & Recoil Group | 1 |
194-1608 Link As-Track
| 09***63 | Pin; (Cotter) | 1 |
| 15***80 | Seal; (Track) | 96 |
| 15***81 | Seal; (Track Master) | 2 |
194-1609 Link As-Track
| 09***63 | Pin; (Cotter) | 1 |
| 15***80 | Seal; (Track) | 88 |
| 15***81 | Seal; (Track Master) | 2 |
164-6893 Link As-Track
| 09***63 | Pin; (Cotter) | 1 |
| 11***72 | Bushing-Track Master | 1 |
| 15***80 | Seal; (Track) | 88 |
9w-9354 Link As-Track
| 09***63 | Pin; (Cotter) | 1 |
| 11***71 | Bushing - Track | 44 |
| 11***72 | Bushing-Track Master | 1 |
7y-1607 Roller Ar-Track & Carrier
| 16***43 | Roller Group-Track-Single Flange; (Track) (Single Flange) | 14 |
| 7X***65 | Bolt; (M20x2.5x100-mm) | 56 |
| 7Y***07 | Roller Ar-Track & Carrier | 1 |
8e-5600 Roller Gp-Track Carrier
| 6V***61 | Seal; (Id=69.40mm) | 1 |
| 7H***71 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 8E***00 | Roller Group-Track Carrier; (Track Carrier) | 1 |
163-4143 Roller Gp-Track-Single Flange
| 16***43 | Roller Group-Track-Single Flange; (Track) (Single Flange) | 1 |
| 3E***17 | Dowel | 1 |
| 5G***47 | Stopper; (Rubber) | 1 |
145-2974 Track Adjuster & Recoil Gp
| 11***10 | Plate As; (Warning) | 1 |
| 14***74 | Track Adjuster & Recoil Group | 1 |
| 14***76 | Track Adjuster & Recoil Group | 1 |
145-2977 Track Adjuster & Recoil Gp
| 09***36 | Seal-Lip Type | 1 |
| 09***12 | Ring, Back-Up | 2 |
| 09***19 | Seal-O-Ring (Id=59.60mm) | 2 |
145-2976 Track Adjuster & Recoil Gp
| 12***74 | Support | 1 |
| 12***53 | Strip | 1 |
| 14***76 | Track Adjuster & Recoil Group | 1 |
145-2975 Track Adjuster & Recoil Gp
| 11***10 | Plate As; (Warning) | 1 |
| 14***75 | Track Adjuster & Recoil Group | 1 |
| 14***76 | Track Adjuster & Recoil Group | 1 |
9w-9360 Track Gp
| 12***62 | Shoe; (Track) | 45 |
| 16***93 | Link As-Track; (Track) | 1 |
| 9W***61 | Nut - Track (M20x1.5-6g Thd) | 180 |
176-3208 Track Gp
| 12***61 | Shoe-Track; (500mm Wide) | 45 |
| 17***08 | Track Group | 1 |
| 19***09 | Link As-Track; (Track) | 1 |
194-1919 Track Gp
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 19***19 | Track Group; -2-Required | 1 |
| 4I***67 | Cap | 1 |
332-8908 Track Gp -2-Required
| 33***08 | Track Group; -2-Required | 1 |
9w-9359 Track Gp
| 12***61 | Shoe-Track; (500mm Wide) | 45 |
| 9W***61 | Nut - Track (M20x1.5-6g Thd) | 180 |
| 9W***19 | Bolt - Track (M20x1.5x55mm) | 180 |
164-6624 Track Gp
| 12***61 | Shoe-Track; (500mm Wide) | 45 |
| 16***24 | Track Group | 1 |
| 16***93 | Link As-Track; (Track) | 1 |
211-8297 Track Gp
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 21***97 | Track Group | 1 |
194-1911 Track Gp -2-Required
| 16***04 | Shoe-Track | 49 |
| 19***08 | Link As-Track; (Track) | 1 |
| 19***11 | Track Group; -2-Required | 1 |
179-3062 Track Gp
| 12***62 | Shoe; (Track) | 45 |
| 17***62 | Track Group | 1 |
| 19***09 | Link As-Track; (Track) | 1 |
176-3206 Track Gp
| 17***06 | Track Group | 1 |
| 19***08 | Link As-Track; (Track) | 1 |
| 9W***61 | Nut - Track (M20x1.5-6g Thd) | 196 |
194-1920 Track Gp -2-Required
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
203-2201 Track Gp
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 20***01 | Track Group | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
194-1912 Track Gp -2-Required
| 19***12 | Track Group; -2-Required | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
194-1910 Track Gp -2-Required
| 10***14 | Shoe-Track | 49 |
| 19***08 | Link As-Track; (Track) | 1 |
| 19***10 | Track Group; -2-Required | 1 |
Work Tools
7y-2219 Adjuster Gp-Bucket -B-Family
| 17***01 | Edge | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
177-8329 Bucket & Adjuster Gp
| 17***07 | Edge | 1 |
| 17***29 | Bucket & Adjuster Group | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
188-2212 Bucket & Adjuster Gp
| 17***13 | Edge | 1 |
| 18***12 | Bucket & Adjuster Group; -Heavy-Duty | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
188-2232 Bucket & Adjuster Gp
| 17***25 | Edge | 1 |
| 18***32 | Bucket & Adjuster Group; -Heavy-Duty | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 4 |
188-2222 Bucket & Adjuster Gp
| 17***19 | Edge | 1 |
| 18***22 | Bucket & Adjuster Group; -Heavy-Duty | 1 |
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
188-2242 Bucket & Adjuster Gp
| 10***81 | Edge | 1 |
| 18***42 | Bucket & Adjuster Group | 1 |
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
177-8279 Bucket As-Heavy Duty
| 17***79 | Bucket As-Heavy Duty | 1 |
| 19***27 | Edge | 1 |
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
188-2213 Bucket As-Heavy Duty
| 18***13 | Bucket As-Heavy Duty | 1 |
| 19***66 | Edge | 1 |
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
188-2233 Bucket As-Heavy Duty
| 12***83 | Edge | 1 |
| 18***33 | Bucket As-Heavy Duty | 1 |
| 22***04 | Adapter-Tip; -K-100 | 2 |
188-2223 Bucket As-Heavy Duty
| 12***20 | Edge | 1 |
| 18***23 | Bucket As-Heavy Duty | 1 |
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 5 |
188-2243 Bucket As-Heavy Duty
| 18***43 | Bucket As-Heavy Duty | 1 |
| 19***34 | Edge | 1 |
| 22***04 | Adapter-Tip; -K-100 | 4 |
232-0033 Edge As-Base
| 11***76 | Cover Assem. | 1 |
| 11***77 | Cover Group-Storage | 1 |
| 12***46 | Lockwasher | 2 |
232-0037 Edge As-Base
| 12***46 | Lockwasher | 2 |
| 13***46 | Cover Assem. | 1 |
| 14***09 | Case As-Accessory | 1 |
232-0029 Edge As-Base
| 13***63 | Valve As; (Expansion) | 1 |
| 13***70 | Switch As-Pressure; (Refrigerant Pressure Cutoff) | 1 |
| 14***12 | Core As-Evaporator; (Refrigerant) | 1 |
232-0026 Edge As-Base
| 15***34 | Air Conditioner & Mounting Group | 1 |
| 15***18 | Compressor Group-Refrigerant; (Refrigerant) | 1 |
| 15***82 | Condenser & Mtg Group-Refrigerant | 1 |
232-0034 Edge As-Base
| 08***84 | Grommet | 2 |
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 1 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
232-0031 Edge As-Base
| 09***92 | Washer, Tooth | 3 |
| 14***31 | Clamp | 1 |
| 14***32 | Clip | 2 |
232-0027 Edge As-Base
| 15***34 | Air Conditioner & Mounting Group | 1 |
| 15***18 | Compressor Group-Refrigerant; (Refrigerant) | 1 |
| 15***82 | Condenser & Mtg Group-Refrigerant | 1 |
232-0039 Edge As-Base
| 08***84 | Grommet | 2 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 09***21 | Lamp-Cab Interior; (Cab) | 1 |
232-0038 Edge As-Base
| 08***84 | Grommet | 2 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 09***21 | Lamp-Cab Interior; (Cab) | 1 |
232-0028 Edge As-Base
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 09***92 | Washer, Tooth | 1 |
| 13***96 | Relay; (Clutch Solenoid) | 2 |
232-0025 Edge As-Base
| 12***57 | Clamp | 2 |
| 13***50 | Air Conditioner Group | 1 |
| 13***52 | Hose; (Drain) | 2 |
232-0030 Edge As-Base
| 12***48 | Duct Group-Defroster | 1 |
| 12***49 | Duct Group-Cab Air | 1 |
| 12***50 | Duct Group-Air | 1 |
232-0023 Edge As-Base
| 12***17 | Edge | 1 |
| 22***04 | Adapter-Tip; -K-100 | 5 |
| 23***23 | Edge As-Base | 1 |
232-0024 Edge As-Base
| 19***32 | Edge | 1 |
| 22***04 | Adapter-Tip; -K-100 | 3 |
| 23***24 | Edge As-Base | 1 |
232-0022 Edge As-Base
| 12***05 | Edge | 1 |
| 22***04 | Adapter-Tip; -K-100 | 5 |
| 23***22 | Edge As-Base | 1 |
232-0036 Edge As-Base
| 11***76 | Cover Assem. | 1 |
| 12***46 | Lockwasher | 2 |
| 14***09 | Case As-Accessory | 1 |
232-0032 Edge As-Base
| 09***44 | Screw-Machine; (M8x1.25x12-mm) | 4 |
| 09***76 | Nut; (M14x2-Thd) | 1 |
| 23***32 | Edge As-Base | 1 |
232-0035 Edge As-Base
| 12***46 | Lockwasher | 2 |
| 13***46 | Cover Assem. | 1 |
| 14***09 | Case As-Accessory | 1 |
318B N serial number reference
The product identification plate is a stamped metal plate riveted to the machine frame at the base of the operator cab, usually on the right-hand side; the number is also stamped directly into the frame steel nearby as a backup. Read the first three characters as the prefix (model and build series identifier), and the digits that follow as the sequential unit number within that prefix run. Caterpillar stamps the PIN in more than one place on the machine, so cross-check the cab plate against the frame stamping if the plate looks replaced or the numbers do not match.
| Prefix | Identifies | Notes |
|---|---|---|
| 7KZ | 318B N (narrow-gauge configuration in the 318B line; same serial block filed under 318B L / 318B LN in other service and parts documentation) | Cat 3046T turbocharged diesel, approx. 89 kW gross / 86 kW flywheel (119 hp gross / 115 hp net). Serial range begins 7KZ00001, production centered around 2000-2002. Some Cat parts and prefix listings tie this block specifically to 318B N; other service-manual and spec-sheet sources label the same 7KZ block 318B L or 318B LN instead - same underlying machine and serial block, inconsistent suffix labeling across documentation. |
| 5XK | 318B N (continuation block of the same 318B line, from S/N 24000 up) - confirm exact suffix designation with dealer | Same 3046T engine and power rating as the 7KZ block. A real-world unit at this prefix is dated 2003; block likely spans early-to-mid 2000s. OEM parts documentation groups this prefix together with 318B and 318B LN, not with an explicit N label, and it does not appear in at least one independent prefix listing that does show 7KZ under 318B N. Confirm with dealer whether this block files under 318B N or 318B LN in parts lookup before ordering. |
Frequently asked questions
What engine does the Caterpillar 318B N use?
The 318B N runs Caterpillar's 3046T, a mechanically governed, turbocharged 6-cylinder, 5.0-liter diesel rated at roughly 88.7 kW (119 hp) gross and 85.8 kW (115 hp) net. It has no ECM or electronic fault-code system, the same as every other 318B-family variant.
What is the operating weight of the Caterpillar 318B N?
Operating weight runs about 18,260-18,390 kg (40,255-40,540 lb), depending on undercarriage and track shoe width (500-600 mm). Check the specific configuration and serial number for the exact figure.
What replaced the Caterpillar 318B N?
Caterpillar replaced the 318B family with the 318C in the mid-2000s. The 318C moved to an electronically controlled engine with ECM-based diagnostics, a system the mechanically governed 318B never had.
What 318B N owners discuss
What hydraulic pump behavior comes up most often in field reports on the 318B N?
The most reported complaint is a pump that will not destroke, showing up as a negative flow control (standby) pressure well below spec with the joysticks centered. Spec target on this pump and valve combination is roughly 2,340-2,410 kPa (340-350 psi) at neutral; failed units have been measured well under 500 kPa (about 60-70 psi). Root causes reported include a stuck or leaking pressure and flow compensator valve, a bad relief valve feeding powershift pressure to the pumps, or a pilot circuit that isn't cutting flow back. Rising case-drain volume over time is the early warning sign of general pump wear before a hard failure shows up. Have your dealer verify standby pressure and compensator condition before condemning the whole pump.
Swing feels lazy or weak with no unusual noise. What gets checked before blaming the swing motor?
Owners and techs check the slew control linkage first: minimal side play in the lever, full lever travel with the rubber boot not binding on the swivel joint underneath, and pilot pressure that rises smoothly as the lever moves, roughly 4,070 kPa (590 psi) off the pilot pump dropping to near 3,450 kPa (500 psi) at full lever travel into the swing section of the control valve. A swing that is weak but smooth, with no grinding or clunking, usually traces back to linkage or pilot pressure rather than the swing motor or gearbox.
Oil is showing up at the swing transmission vent. Is that a transmission problem?
Usually not. The recurring cause on this machine is internal seal failure inside the swing motor, which dumps gear oil down into the swing gearbox below and floods out through the vent. The swing brake is built into the motor itself, so the upper structure must be blocked against rotation before the motor is unbolted from the gearbox. Have your dealer verify seal condition and confirm the brake holds before the machine goes back to work.
What undercarriage wear pattern is typical for this class of Cat excavator?
The most common failure point is the final drive face seal between the sprocket and the final drive housing. It is usually triggered by packed mud and debris pushing the seal out of its bore rather than by hour count alone, so a clean undercarriage is the main preventive measure. Track tension matters just as much: sag set too tight accelerates wear on bushings, sprockets and idlers as fast as sag set too loose. Typical sag references for machines this size run around 25-50 mm (1-2 in), but the exact figure varies by undercarriage configuration and should be checked against the machine's own maintenance manual rather than assumed.
Are there known quirks with the engine on this machine?
This machine runs the Cat 3046T turbocharged diesel, which shares its block and crankshaft with the Mitsubishi S6S industrial engine, though Cat's version uses straight-cut timing gears versus the S6S's helical gears, and injector, piston and camshaft specs differ by power rating. Field reports center on injector weep causing black smoke on startup or under load, usually cured with fresh copper sealing washers at the injector, and turbo shaft play once hours run well past 7,500, checked by spinning the compressor wheel by hand with the intake pipe off and confirming a smooth, wobble-free coast-down. Because Cat and Mitsubishi don't officially cross-reference the family, sourcing a good used long block for this engine has become noticeably harder in the secondary market.
What electrical or sensor issues show up on this platform, and how do owners work around a control failure?
A monitor that goes dark while the engine keeps running and starting normally has been traced to a failed pressure sensor feeding the hydraulic ECM rather than a dead display. Before swapping the monitor, the checks are 24V present with the key off, solid ground continuity, and the expected low-voltage sensor reference showing at the ECM connector. The machine also has a manual backup mode: if the hydraulic ECM fails, a switch lets the operator preset pump output at a reduced rate and control engine and governor speed by hand instead of through the ECM. That is a get-home feature, not a repair. Have your dealer verify ECM and sensor wiring before condemning either component.
What should a buyer check on a used 318B N before making an offer?
Walk the frame, boom and stick for weld cracks and rust bleed lines, and confirm hatches and latches still function. Lift each track off the ground in turn and rotate it slowly, checking for cuts, chunking or dry-rotted pads. Rotate the upper structure and confirm the swing ring responds promptly and stops cleanly with no clunk or lag. Run the engine and watch for smoke, listen for knock, and check for coolant in the oil or oil in the coolant. Inspect every cylinder and hose fitting for seepage, especially underneath the machine. Because the 3046T is out of production and getting harder to source as a used long block, match the engine serial to the machine's plate and ask for oil-sample or service records rather than trusting the hour meter alone, since meters do get swapped on machines in this age and hour range. Have your dealer run a full undercarriage and hydraulic inspection before you finalize the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 318B N part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.