Caterpillarexcavator
Caterpillar 345C L
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 345C L is a large crawler excavator in the roughly 44-50 tonne class (44,970 kg / 99,150 lb in reference configuration, ranging toward 49,800 kg / 109,800 lb depending on undercarriage, boom, stick, and shoe width), built from about 2005 into 2007-2008 as part of Cat's C-series large excavator line. It runs a Cat C13 ACERT six-cylinder diesel with ADEM A4 electronic controls, rated at 257 kW (345 hp) net flywheel power; some spec-sheet editions instead show 239 kW (321 hp) — confirm against the engine plate. The C13 replaced the 3176C engine used in the preceding 345B Series II. The "L" designates the long-carriage undercarriage: a longer track frame with additional bottom roller support compared with a standard-length chassis, offered in fixed-gauge or variable-gauge form for different transport and stability needs. Cat also built a Long Reach Excavation (LRE) version pairing an extended boom with a longer stick for deep-reach digging. The 345C L was succeeded by the Cat 345D L.
The C-series update carried ACERT emissions technology (meeting Tier 3 US EPA and Stage IIIA EU rules, depending on market) into a lower-revving, higher-displacement engine than the 345B Series II's 3176C, cutting fuel burn and wear while adding power. Cat extended engine oil, oil filter, and fuel-water-separator service intervals to 500 hours on this generation and fitted a tool-free radial-seal air cleaner, cutting downtime on high-utilization jobs. Field history on the 345C L centers on a handful of known issues: early-production machines (serial prefix FPC) shipped with a stick regeneration valve and a pilot-circuit setscrew that could let a loaded boom or stick creep, both corrected with a revised valve; worn turbo bearings and leaking injectors show up as smoke and soft power on higher-hour engines; and an uncommanded swing brake release has been traced to a bad solenoid, a stuck relief valve, or displaced parts inside the swing drive. None of that has kept the model out of daily service. Its C13 platform is shared with other Cat machines and on-highway engines, keeping parts and rebuild support active at Cat dealers even as they prioritize newer D and D2 generation stock, and its size class still fits mass-excavation, quarry loading, and drainage work where a 45-50 tonne excavator is the right tool.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 345C L specifications
Engine
| Engine model | Cat C13 with ACERT Technology, inline 6-cylinder turbocharged diesel |
| Net power (ISO 9249 / SAE J1349 / EEC 80/1269) | 257 kW (345 hp) at 1800 rpm net flywheel power; some spec-sheet editions instead show 239 kW (321 hp) — confirm against the engine plate |
| Displacement | 12.5 L (763 cu in) |
| Bore x stroke | 130 mm x 157 mm (5.1 in x 6.2 in) |
| Emissions | Meets EU Stage II exhaust emission standard; no power derate required up to 2300 m (7,500 ft) altitude |
Weights
| Operating weight (reference configuration, long undercarriage) | 44,970 kg (99,150 lb) — with 6.9 m reach boom, 3.9 m stick, 1219 mm (48 in) GP-C bucket, and 750 mm (30 in) shoes |
| Operating weight range by configuration | Roughly 44,000-49,800 kg (97,000-109,800 lb) depending on undercarriage, boom, stick, track shoe, and counterweight selection |
| Ground pressure | Not documented in available spec sheets for this configuration; confirm with dealer for a specific shoe width |
| Transport weight | Matches operating weight; no separately reduced shipping weight is published for this model |
Dimensions
| Transport length | 11.55-12.41 m (37'11" - 40'9"), varies by boom and stick combination |
| Transport height | 3.50-3.97 m (11'6" - 13'0"), varies by boom and stick combination |
| Tail swing radius | 3.77 m (12'4"), constant across boom/stick options |
| Track shoe width | 750 mm (30 in) triple grouser standard on fixed and long-fixed undercarriage; 600 mm (24 in) triple grouser standard on variable-gauge undercarriage; 600-900 mm (24-36 in) shoes offered |
| Ground clearance | 0.51 m (1'8") on fixed-gauge undercarriage; 0.74 m (2'5") on variable-gauge undercarriage |
| Undercarriage length (center of rollers) | 4.36 m (14'4") fixed gauge; 4.34 m (14'3") variable gauge |
| Track length on ground | 5.36 m (17'7") fixed gauge; 5.34 m (17'6") variable gauge |
| Track gauge | 2.74 m (9'0") fixed gauge (retracted = extended); variable gauge 2.39 m (7'10") retracted, 2.89 m (9'6") extended |
| Cab height | 3.21 m (10'6") fixed gauge; 3.36 m (11'0") variable gauge |
Performance
| Max digging depth | 6.74-8.92 m (22'2" - 29'3"), varies by boom and stick, deepest with the long-reach boom and longest stick |
| Max reach at ground level | 10.74-12.96 m (35'3" - 42'6"), varies by boom and stick |
| Max dump/loading height | 6.59-7.93 m (21'8" - 26'0"), varies by boom and stick |
| Max cutting height | Not published as a separate figure; factory literature uses maximum loading height for this measurement |
| Swing speed | 8.6 rpm; swing torque 148.5 kN-m (109,560 lb ft) |
| Max travel speed | 4.4 km/h (2.7 mph) |
| Gradeability | Not documented in available spec sheets |
| Max drawbar pull | 337.7 kN (75,920 lbf) |
Forces
| Bucket digging force (ISO) | 220-300 kN (49,400-67,300 lbf) depending on bucket family and coupler use; reference GP-C bucket without coupler rates 268 kN (60,200 lbf) ISO / 238 kN (53,500 lbf) SAE |
| Stick digging force (ISO) | 173-234 kN (38,800-52,500 lbf), lowest with the longest stick and highest with the shortest stick; reference stick rates 186 kN (41,800 lbf) ISO / 181 kN (40,800 lbf) SAE |
| Note on force figures | Some general spec summaries cite a lower bucket force near 175 kN (39,300 lbf); that number is closer to the long-stick digging force rating and should not be read as bucket force |
Service capacities (summary)
| Fuel tank | 705 L (186 gal) |
| Hydraulic system | 570 L (150 gal) total including tank; hydraulic tank alone 243 L (64 gal) |
| Engine oil | 42 L (11 gal) |
| Cooling system | 61 L (16 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
345C L fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 41.6 L (11.0 US gal) | Cat DEO / DEO-ULS diesel engine oil meeting Cat ECF-3, API CJ-4, ACEA E9 for the C13 ACERT engine fitted to this machine. SAE 15W-40 for ambient -18°C to 40°C; SAE 10W-30 for a wider band, about -9.5°C to 50°C. Cold-climate duty can step to SAE 5W-40 synthetic or 0W-40. |
| Cooling system | 60.6 L (16.0 US gal) | Cat ELC (Extended Life Coolant), premixed 50% ELC / 50% water for initial fill and top-off. Gives freeze protection to about -37°C and boil protection to about 129°C at a 1 bar cap. Add ELC Extender around 3,000 hours; drain, flush, and refill at 6,000 hours. |
| Fuel tank | 704.0 L (186.0 US gal) | Ultra-low-sulfur No. 2-D diesel meeting Cat's fuel specification for the C13 ACERT fuel system. Keep any biodiesel blend within the OMM-stated limit; higher blends shorten service intervals. |
| Hydraulic system total (incl. tank) | 567.8 L (150.0 US gal) | Cat HYDO Advanced 10/20/30 (SAE 10W/20W/30) or Cat BIO HYDO Advanced as first choice, giving the longest drain interval. Second choice: Cat MTO, TDTO, or DEO meeting Cat ECF-1a/ECF-2/ECF-3. Commercial alternates: TO-4-type hydraulic oils or a biodegradable oil meeting Cat BF-2. |
| Hydraulic tank | 242.3 L (64.0 US gal) | Same fluid family as the hydraulic system total: Cat HYDO Advanced, or Cat BIO HYDO Advanced where biodegradable fluid is required. |
| Final drive (each side) | 15.1 L (4.0 US gal) | Cat TDTO, or an oil meeting Cat TO-4/FD-1 spec. Viscosity by ambient temperature: SAE 30 for about -20°C to 25°C (-4°F to 77°F), SAE 40 for -10°C to 40°C (14°F to 104°F), SAE 50 for 0°C to 50°C (32°F to 122°F). Cat TDTO-TMS synthetic multigrade covers roughly -20°C to 40°C in one fill, avoiding seasonal changeouts. |
| Swing drive | 9.8 L (2.6 US gal) | Same TO-4/TDTO oil family as the final drives, selected by the same SAE 30/40/50 ambient-temperature bands. Some spec sheets tag this figure 'each,' but the 345C L runs a single swing drive gear case, not paired units like the final drives — treat as one fill unless a dual-swing-motor configuration is confirmed. |
| Grease (all pin and bushing points) | Per fitting — apply until purged; no reservoir capacity specified | Cat Advanced 3Moly Grease, NLGI 2, for general pin and bushing lubrication across roughly -20°C to 40°C ambient. For high-load or extreme-duty joints (e.g. bucket linkage under heavy digging), Cat Extreme Application Grease (higher moly loading, calcium sulfonate thickener) is the upgrade option. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 345C L maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the 345C L beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull Cat S·O·S samples from the C13 ACERT engine oil, hydraulic tank, and both final drives at each fluid interval. Engine samples catch turbo bearing wear and injector leakage before they show as smoke or lost power. Hydraulic samples flag contamination reaching the main pump and control valve on this roughly 350-bar (5,080 psi) system. Watch the cab monitor's stored fault history for ECM parameter errors between visits. Sample trends justify running Cat HYDO Advanced on its extended drain interval instead of a fixed oil change.
Corrective & Common Repairs
Common 345C L complaints trace to fuel and air delivery, not the C13 block: leaking injectors bring white smoke and soft power, worn turbo shaft bearings drop boost under load. Slow or uneven stick movement often points to a starved pilot supply, not a weak pump. Early-production machines (serial prefix FPC) can still carry the factory-known stick regeneration valve and pilot setscrew fault that lets a loaded boom or stick creep; confirm serial coverage first. Uncommanded swing brake release needs solenoid, relief valve, and swing drive checks.
Overhaul & Rebuild Points
High-hour 345C L machines typically need a C13 inframe (injectors, turbocharger, valve train) once oil analysis shows rising wear metals. The center swivel and final drive floating seals wear enough to weep oil and mimic a weak travel motor; address these before condemning the motor itself. Swing drive rebuilds surface as skewed valve plates or moved sun-gear spacers behind an uncommanded brake release. Undercarriage wear (chain, rollers, idlers, sprockets) on the long-carriage frame often forces replacement near 12,000 hours, sooner on abrasive ground.
Seasonal & Environment Servicing
Cold-climate 345C L operation needs Cat ELC checked for freeze protection, engine oil stepped to a colder-rated grade (or synthetic 5W-40/0W-40), and final drive/swing drive oil matched to ambient temperature via the SAE 30/40/50 TDTO bands. In hot, dusty quarry work, service the radial-seal air cleaner ahead of the standard interval and keep the radiator and hydraulic oil cooler cores clear to prevent overheating under sustained digging. Abrasive ground accelerates undercarriage and final-drive-seal wear, so shorten track inspection intervals and watch for early oil weep.
345C L common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1641 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 1R-0755 | Filter As-Fuel | Fuel system service | Check fitment → |
| 093-7521 | Filter-Oil | Hydraulic service | Check fitment → |
| 6N-1127 | Shield-Oil Filter | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
345C L fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 (MID 36, Engine Oil Pressure) | Engine oil pressure reads below the normal operating range for current engine speed. | Low oil level, worn or failing oil pump, plugged oil filter, or a faulty oil pressure sensor/wiring. | Shut engine down safely, check oil level and filter condition first, then verify sensor wiring and connector before restart. |
| 110-00 (MID 36, Engine Coolant Temperature) | Engine coolant temperature above the normal operating range. | Low coolant level, debris-blocked radiator core, thermostat stuck closed, or a fault in the hydraulically driven variable-speed cooling fan. | Idle down and let the engine cool, check coolant level and radiator fins for blockage, confirm the cooling fan responds to demand. |
| 164-03 (MID 36, Injection Actuation Pressure) | Injection actuation pressure (IAP) sensor circuit reads above normal on the HEUI high-pressure oil system that fires the injectors. | Corroded or damaged IAP sensor connector, chafed harness, or a failed IAP sensor. | Inspect the IAP sensor connector and wiring for damage, test the sensor against spec, replace the sensor if it is out of range. |
| 268-02 (MID 36, Engine ECM) | Engine ECM reports its own programmed parameters as erratic or incorrect (personality/calibration data fault). | Corrupted or incomplete engine ECM flash, interrupted reprogramming event, or an internal ECM hardware fault. | Connect Cat ET, review and reprogram engine parameters, reflash the ECM software, replace the ECM if the fault repeats after a clean flash. |
| 590-12 (MID 105, Hydraulic Pump Control) | Hydraulic pump control module reports an internal self-check (bad device or component) failure. | Internal pump control module fault, low supply voltage to the module, or a damaged module connector. | Check power and ground circuits to the pump control module, reseat connectors, replace the module if Cat ET confirms an internal fault. |
| 1961-03 (Hydraulic Oil Temperature) | Hydraulic tank oil temperature sensor circuit reads above normal or open. | Damaged sensor harness, corroded connector, or a failed hydraulic oil temperature sensor. | Inspect harness and connector for damage, check sensor resistance against spec, replace the sensor if out of range. |
| 168-01 (MID 36, Electrical System Voltage) | System voltage supplied to the engine ECM reads below normal. | Weak or failing battery, loose or corroded battery cable connections, or a faulty alternator/voltage regulator. | Load-test the batteries, clean and tighten all battery and ground connections, check charging system output. |
| 190-00 (MID 36, Engine Speed) | Engine speed sensor reports RPM above the governed limit (overspeed, most severe level). | Sudden load release such as a fast downhill travel or swing event, a throttle linkage fault, or a faulty speed sensor. | Reduce throttle immediately and bring the machine to a safe stop, inspect throttle linkage and speed sensor wiring, pull codes with Cat ET to confirm. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
345C L attachments & work tools
Buckets
General-purpose (GP) and heavy-duty (HD) buckets for the 345C L run roughly 0.9-2.7 m3 (1.2-3.5 yd3) across 900 to 1800 mm (36-72 in) widths, with a rated maximum bucket capacity near 3.8 m3 (5 yd3) on mass-excavation profiles. HD and extreme-service/rock buckets add reinforced sidewalls and abrasion-resistant steel for shot rock and granite; GP buckets suit dirt, loam, gravel and clay. Buckets pin directly to stick and linkage or mount through a pin-grabber quick coupler, using a 110 mm stick-pin bore and 100 mm linkage-pin bore common to this size class.
Hydraulic hammers
Operating weight puts the 345C L in the roughly 35-55 t carrier bracket, matching mid-to-large Performance-class hammers with service (tool) weight in the approximate 2,300-4,500 kg (5,100-9,900 lb) range, varies by hammer model and dealer chart. Breaker choice should track the machine's medium/high-pressure auxiliary circuit rather than sizing purely off bucket capacity.
Quick couplers
Hydraulic pin-grabber quick couplers built for this size class use the same pin pattern as the bucket linkage: 110 mm stick-pin bore and 100 mm linkage-pin bore. Standard configuration is a cab-switch-controlled hydraulic coupler with a secondary mechanical latch, letting the operator drop and pick up buckets and other pin-on tools without leaving the seat.
Thumbs/grapples
Hydraulic thumbs sized for this class bolt to the stick on the same 110 mm/100 mm pin pattern as the bucket, for holding pipe, debris, or rock alongside bucket work. Demolition and sorting grapples sized for the 345C L's weight class are rated for roughly 35-65 t carriers, with reinforced jaws and high-wear cutting edges for sorting and material-handling work.
Rippers
Single-shank rippers built for this size class share the 110 mm/100 mm pin pattern used by buckets and couplers, for breaking hard-pan, frozen ground, or paved surfaces the bucket alone can't penetrate.
Hydraulic-kit notes
The 345C L carries a standard auxiliary hydraulic valve supporting both medium- and high-pressure work tools (hammers, shears, pulverizers, multi-processors, sorting grapples, compactors) without a separate field-installed kit. An optional tool control system lets the operator tune flow, pressure, and control response, including foot-pedal modulation, to match the specific tool. Combined main pump flow tops out near 720 L/min (190 gpm) at 35,000-36,000 kPa (5,080-5,220 psi) system pressure; the tool circuit draws a tuned portion of that, not full pump output.
All 345C L assemblies by section
Every catalogued assembly group for the Caterpillar 345C L. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
233-1275 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
| 13***94 | Latch | 6 |
255-2996 Air Cleaner Gp
| 25***96 | Air Cleaner Group | 1 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 1 |
279-7821 Drain Gp-Muffler
| 25***91 | Pipe As-Exhaust | 1 |
| 27***21 | Drain Group-Muffler | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 4 |
131-8849 Extension Gp-Exhaust
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 12***29 | Clamp; (V-Band) | 1 |
| 13***49 | Extension Group-Exhaust; (Exhaust) | 1 |
241-4761 Lines Gp-Air -Intake
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 23***30 | Manifold-Exhaust; (End) | 2 |
| 24***61 | Lines Group-Air; -Air Inlet Manifold | 1 |
126-0081 Lines Gp-Air -Turbocharger Outlet
| 12***81 | Lines Group-Air; -Turbocharger Outlet | 1 |
| 13***49 | Plate | 2 |
| 14***09 | Hose | 1 |
210-8163 Lines Gp-Air
| 21***63 | Lines Group-Air; -Turbocharger, Aftercooler | 1 |
| 23***57 | Tube As | 1 |
| 23***62 | Hose | 1 |
222-8357 Lines Gp-Air -Air Cleaner, Turbocharger
| 20***51 | Elbow-Air | 1 |
| 22***57 | Lines Group-Air; -Air Cleaner, Turbocharger | 1 |
| 24***40 | Cap-Protective | 1 |
247-2833 Manifold Gp-Exhaust
| 12***08 | Stud; (M10x1.5x30-mm) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 16***27 | Plug | 2 |
222-3092 Manifold Gp-Inlet
| 13***47 | U-Bolt | 2 |
| 22***92 | Manifold Group-Inlet | 1 |
| 23***46 | Tube As | 1 |
222-8253 Muffler Gp
| 13***75 | Clamp As; (Service Repair) | 1 |
| 16***58 | Clip-Hose | 1 |
| 16***63 | Clamp | 2 |
265-5076 Turbocharger Gp
| 09***57 | Hinge As | 2 |
| 12***29 | Core As-Fuel Cooler | 1 |
| 13***96 | Washer; (10.2x39.6x2.3-mm Thk) | 4 |
247-2969 Turbocharger Gp
| 24***69 | Turbocharger Group | 2 |
| 27***51 | Gasket-Turbocharger | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
267-0010 Base Gp-Valve Cover -Engine
| 26***10 | Base Group-Valve Cover | 1 |
| 32***39 | Seal-Pip | 1 |
| 33***07 | Adapter | 1 |
325-4505 Base Gp-Valve Cover
| 22***75 | Belt-Serpentine; (Alternator) | 1 |
| 32***05 | Base Group-Valve Cover | 1 |
230-7215 Belt Gp-Serpentine
| 19***42 | Pulley As; (Idler) (8 Groove) | 1 |
| 21***95 | Belt Tensioner | 1 |
| 22***13 | Pulley As-Idler; (8-Groove) | 1 |
230-7216 Belt Tensioner Gp
| 13***18 | Seal-O-Ring; (Camshaft) | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 22***07 | Gear; (96-Teeth) | 1 |
223-7463 Camshaft Gp
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 3 |
| 22***63 | Camshaft Group | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 3 |
127-5728 Cover Gp-Flywheel Housing
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 12***28 | Cover Group-Flywheel Housing; (Flywheel Housing) | 1 |
| 12***05 | Cover | 1 |
113-8987 Cover Gp-Front Housing
| 11***87 | Cover Group-Front Housing | 1 |
| 28***23 | Cover Group | 1 |
| 6V***97 | Bolt; (M12x1.75x40-mm)(Locking) | 3 |
227-2574 Cover Gp-Front Housing
| 21***28 | Washer-Isolator | 10 |
| 22***74 | Cover Group-Front Housing; -Air Compressor | 1 |
| 22***11 | Seal-Valve Cover; (Mechanism) | 1 |
229-2615 Cover Gp-Valve Mechanism
| 12***82 | Bearing-Main; (0.51-mm Us)(.51mm U.S.) | 0 |
| 12***83 | Bearing-Main; (0.76-mm Us)(.76mm U.S.) | 0 |
| 12***84 | Bearing-Main; (0.51-mm Os)(.51mm O.S.) | 0 |
224-3881 Crankshaft Gp
| 20***72 | Cap-Bearing | 7 |
| 22***46 | Bolt; (M18x2.5x170-mm) | 14 |
| 22***81 | Crankshaft Group | 1 |
303-1382 Cylinder Block As
| 18***69 | Bearing; (Sleeve) | 7 |
| 30***82 | Cylinder Block As | 2 |
303-1384 Cylinder Block As
| 30***84 | Cylinder Block As | 2 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 3 |
| 6V***38 | Dowel; (9.55mm Dia X 20mm Oal) | 2 |
303-1383 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 19***30 | Liner-Cylinder Block | 6 |
| 30***83 | Cylinder Block As | 2 |
240-7271 Cylinder Block Gp
| 16***04 | Seal-O-Ring | 12 |
| 22***70 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 24***71 | Cylinder Block Group | 1 |
308-6358 Cylinder Head As
| 16***04 | Seal-O-Ring | 12 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 7 |
| 22***70 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
342-4397 Cylinder Head As
| 16***04 | Seal-O-Ring | 12 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 7 |
| 22***70 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
345-3752 Cylinder Head As
| 19***63 | Fastener Group-Cylinder Head | 1 |
| 22***92 | Gasket; (Cylinder Head) | 1 |
| 25***95 | Cylinder Head Group | 1 |
257-4095 Cylinder Head Gp
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
| 22***30 | Valve; (Exhaust) | 12 |
| 22***25 | Base | 12 |
305-0618 Cylinder Head Gp
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 16***25 | Damper Assem. | 1 |
| 17***92 | Adapter | 1 |
240-7679 Cylinder Head Gp
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
| 21***86 | Spring; (Outer) | 24 |
| 22***28 | Valve; (Inlet) | 12 |
305-0617 Cylinder Head Gp
| 19***63 | Fastener Group-Cylinder Head | 1 |
| 22***92 | Gasket; (Cylinder Head) | 1 |
| 30***17 | Cylinder Head Group | 2 |
117-2766 Damper Gp
| 09***24 | Ring; (Retaining) | 1 |
| 11***66 | Damper Group | 1 |
| 13***49 | Spacer; (45x53x10-mm Thk) | 2 |
200-3313 Drive Gp-Fan
| 09***24 | Ring; (Retaining) | 1 |
| 12***25 | Seal-O-Ring; (Id=11.89mm) | 1 |
| 13***49 | Spacer; (45x53x10-mm Thk) | 2 |
295-9637 Drive Gp-Fan
| 21***60 | Bolt; (M10x1.5x130-mm) | 8 |
| 24***11 | Bolt-Cylinder Head; (M16x2x220-mm) | 26 |
| 29***37 | Drive Group-Fan | 1 |
198-4963 Fastener Gp-Cylinder Head
| 19***63 | Fastener Group-Cylinder Head | 1 |
| 21***85 | Spacer; (10.5-mm Thk) | 1 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 6 |
117-2771 Fastener Gp-Damper & Pulley
| 11***71 | Fastener Group-Damper & Pulley | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 8 |
| 9X***21 | Bolt; (Locking) (M16x2.0x45mm) | 8 |
117-2794 Fastener Gp-Flywheel
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 23***22 | Flywheel As | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
242-8670 Flywheel Gp
| 21***70 | Shaft | 1 |
| 22***02 | Gear As; (64-Teeth) | 1 |
| 22***05 | Gear As; (Camshaft Idler, 71-Teeth) | 1 |
222-3088 Gear Gp-Front
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
220-7122 Housing Gp-Flywheel
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
| 16***66 | Seal Group-Crankshaft; (Front) | 1 |
| 22***73 | Seal-Ring; (Crankshaft) | 1 |
218-7272 Housing Gp-Front
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 12***93 | Dowel | 1 |
| 20***75 | Invalid Part; (Unit Injector) | 6 |
237-4376 Lifter Gp-Valve -Mechanism
| 22***40 | Eye-Lifting | 2 |
| 23***76 | Lifter Group-Valve; -Mechanism | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
224-0880 Lifting Gp-Engine
| 10***37 | Washer; (24.5x135x12-mm Thk) | 4 |
| 13***36 | Mount-Flexible | 2 |
| 13***37 | Mount-Flexible | 2 |
222-8358 Mounting Gp-Engine
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 22***58 | Mounting Group-Engine | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 2 |
219-7440 Mounting Gp-Fan Drive
| 21***40 | Mounting Group-Fan Drive; (Short) | 1 |
| 24***47 | Bolt; (M12-1.75x93-mm Thd) | 6 |
229-8084 Mounting Gp-Valve Mechanism
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
230-8136 Pan Gp-Oil -Engine
| 11***72 | Bearing-Connecting Rod | 1 |
| 11***73 | Bolt-Connecting Rod | 2 |
| 11***89 | Bearing-Connecting Rod; (Standard) | 1 |
261-1506 Piston & Rod Gp
| 11***72 | Bearing-Connecting Rod | 1 |
| 11***73 | Bolt-Connecting Rod | 2 |
| 11***89 | Bearing-Connecting Rod; (Standard) | 1 |
325-0821 Piston & Rod Gp
| 32***21 | Piston & Rod Group | 1 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 1 |
238-2723 Piston & Rod Gp
| 11***72 | Bearing-Connecting Rod | 1 |
| 11***73 | Bolt-Connecting Rod | 2 |
| 11***89 | Bearing-Connecting Rod; (Standard) | 1 |
117-0165 Plug Gp-Cylinder Block -Oil Gallery, End
| 11***65 | Plug Group-Cylinder Block; -Oil Gallery, End | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
| 9S***82 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
227-9545 Plug Gp-Cylinder Block -Oil Gallery, Rh
| 22***45 | Plug Group-Cylinder Block; -Oil Gallery, Rh | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 6V***51 | Seal-O-Ring (Id=19.18mm) | 1 |
223-3875 Plug Gp-Cylinder Block
| 22***75 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 2 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
269-6164 Plug Gp-Engine
| 20***07 | Pulley; (8-Groove) | 1 |
| 26***64 | Plug Group-Engine | 1 |
207-8103 Pulley Gp-Crankshaft
| 12***91 | Pulley; (8-Groove)(Alternator) | 1 |
| 20***03 | Pulley Group-Crankshaft | 1 |
117-0177 Pulley Gp-Fan & Alt Drive
| 11***77 | Pulley Group-Fan & Alt Drive | 1 |
| 24***95 | Nut-Hex Thin; (M12x1.5-Thd) | 1 |
| 25***21 | Button | 1 |
260-0252 Rocker Arm Gp
| 26***52 | Rocker Arm Group | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
| 26***91 | Rocker Arm As; (Inlet) | 1 |
261-2290 Rocker Arm Gp -Inlet
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
| 26***90 | Rocker Arm Group; -Inlet | 1 |
| 26***93 | Rocker Arm As; (Exhaust) | 1 |
260-0251 Rocker Arm Gp -Unit Injector
| 22***18 | Shaft As | 1 |
| 24***47 | Bolt; (M12-1.75x93-mm Thd) | 2 |
| 24***01 | Stand As | 2 |
261-2294 Rocker Arm Gp -Exhaust
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 16***23 | Cover | 1 |
| 26***94 | Rocker Arm Group; -Exhaust | 1 |
116-1091 Seal Gp-Crankshaft
| 11***91 | Seal Group-Crankshaft; -Single Lip | 1 |
| 22***88 | Support; (Front) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
170-4743 Support Gp-Engine
| 17***43 | Support Group-Engine; -Front | 1 |
| 23***76 | Lifter Group-Valve; -Mechanism | 1 |
| 23***53 | Bridge-Valve | 12 |
240-7272 Valve Mechanism Gp
| 13***45 | Bolt-Hex Head; (M10x1.50x30) | 6 |
| 22***92 | Gasket | 1 |
| 24***72 | Valve Mechanism Group | 1 |
Cooling System
253-7404 Cooler Gp-Engine Oil
| 13***79 | Washer; (11x32x3-mm Thk) | 8 |
| 13***82 | Bolt; (M16x2x100-mm) | 2 |
| 13***33 | Adapter-Fan | 1 |
210-8162 Fan Gp-Suction
| 03***88 | Connector-Tube Assembly To Main Relief | 1 |
| 03***94 | Connector-Flared | 1 |
| 13***89 | Clip; (Ladder) | 1 |
220-7057 Lines Gp-Turbocharger Water
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
| 22***57 | Lines Group-Turbocharger Water | 1 |
236-5900 Lines Gp-Water -Inlet Elbow
| 23***00 | Lines Group-Water; -Inlet Elbow | 1 |
| 24***68 | Plug As-Stor | 2 |
| 6V***50 | Seal-O-Ring; (11.89mm Dia.) | 1 |
235-0364 Lines Gp-Water -Single Temperature Regulator
| 15***23 | Valve-Sampling; (Engine Coolant) | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 21***60 | Valve As-Fluid Sampling; (Engine Oil) | 1 |
224-7662 Plug Gp-Engine Oil Cooler
| 22***62 | Plug Group-Engine Oil Cooler; -Oil Cooler | 1 |
| 29***52 | Pump Group-Water | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 2 |
293-0818 Pump Gp-Water
| 09***35 | Clamp | 1 |
| 11***36 | Clip | 2 |
| 14***67 | Clamp; (Hose) | 6 |
228-5812 Pump Gp-Water
| 20***81 | Bolt-Flange Head; (M8x1.25x20-mm) | 4 |
| 22***03 | Seal-O-Ring | 1 |
| 22***10 | Cover | 1 |
292-9252 Pump Gp-Water
| 12***17 | Seal Group; (Water Pump) | 1 |
| 1B***67 | Ball Bearing | 2 |
| 20***31 | Plug-Cup | 1 |
210-8161 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 3 |
| 13***79 | Washer; (11x32x3-mm Thk) | 4 |
| 14***76 | Joint | 1 |
210-8164 Radiator & Hyd Oil Cooler Gp
| 13***73 | Bolt As; (M12x1.75x25-mm) | 12 |
| 21***64 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 27***24 | Screen As-Radiator; (Upper) | 1 |
276-2625 Screen Gp-Radiator -Reversing Fan
| 25***96 | Air Cleaner Group | 1 |
| 27***25 | Screen Group-Radiator; -Reversing Fan | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
Electrical And Starting System
132-1829 Alarm Gp
| 13***29 | Alarm Group; -Overload Warning | 1 |
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
231-1771 Alarm Gp-Travel
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 23***33 | Alternator Group-Charging; (24-Volt, 80-Ampere) | 1 |
| 3E***53 | Washer-Hard; (11x25x3-mm Thk) | 4 |
252-7132 Alternator Gp-Charging
| 11***37 | Clip | 1 |
| 17***29 | Cable As | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
235-7133 Alternator Gp-Charging
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
227-7144 Battery & Wiring Gp -Cold Weather
| 22***44 | Battery & Wiring Group; -Cold Weather | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
224-2905 Battery & Wiring Gp
| 22***05 | Battery & Wiring Group | 1 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
9w-0742 Block Gp-Junction -Battery
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 26***42 | Bracket As | 1 |
| 8C***08 | Spacer; (6.5x9.5x25.4-mm Thk) | 4 |
241-7601 Connection Gp-Electrical
| 22***96 | Antenna; (Flexible)(Flex) | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
260-2123 Control & Mtg Gp-Communication -Product Link
| 26***23 | Control & Mtg Group-Communication; -Product Link 121sr | 1 |
| 26***86 | Service Group-Implement | 1 |
| 26***41 | Bolt-Socket Head; (M6x1x55-mm) | 4 |
247-5284 Control & Mtg Gp-Communication -Product Link 300
| 23***91 | Bracket As; (Harness) | 1 |
| 24***84 | Control & Mtg Group-Communication; -Product Link 300 | 1 |
| 26***79 | Control Group-Unprogrammed; (Engine) | 1 |
249-5278 Control & Mtg Gp-Engine Elek
| 15***76 | Mount-Isolation | 6 |
| 20***62 | Electronics Group-Machine | 1 |
| 21***07 | Film-Information; (Security System)(Serial Number) | 2 |
221-8826 Control & Mtg Gp-Implement
| 15***73 | Software Group; (Implement) (Work Tool) | 1 |
| 22***26 | Control & Mtg Group-Implement | 1 |
| 26***41 | Bolt-Socket Head; (M6x1x55-mm) | 4 |
270-1574 Control & Mtg Gp-Machine
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 27***74 | Control & Mtg Group-Machine | 1 |
227-7586 Control & Mtg Gp-Machine -Security
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 22***86 | Control & Mtg Group-Machine; -Security | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 24***84 | Control & Mtg Group-Communication; -Product Link 300 | 1 |
| 25***57 | Wiring Group-Communication; -Product Link 121sr | 1 |
| 26***23 | Control & Mtg Group-Communication; -Product Link 121sr | 1 |
207-5262 Electronics Gp-Machine -Security
| 20***62 | Electronics Group-Machine | 1 |
| 22***86 | Control & Mtg Group-Machine; -Security | 1 |
| 23***33 | Wiring Group-Cab; -Machine Security System | 1 |
257-4488 Installation Ar-Communication -Product Link
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
| 17***18 | Band | 1 |
228-8183 Installation Ar-Security
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
| 17***18 | Band | 1 |
153-2521 Lamp Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
153-2523 Lamp Gp-Flood
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 16***95 | Strap; (Cable) | 2 |
| 16***13 | Cover; (Lh) | 1 |
4i-5409 Lighting Gp-Chassis -Front, Rh
| 11***36 | Clip | 12 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
238-2157 Lighting Gp-Flood -Boom
| 22***06 | Panel Group-Circuit Breaker | 1 |
| 23***57 | Lighting Group-Flood; -Boom | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
163-6772 Lighting Gp-Flood -Cab
| 11***36 | Clip | 15 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
238-2188 Lighting Gp-Flood -Boom
| 12***23 | Block; (Terminal) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 17***10 | Circuit Breaker As; (80-Ampere) | 1 |
238-1437 Panel & Mtg Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
224-2906 Panel Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
251-0544 Panel Gp-Switch -Engine Speed, Start
| 11***67 | Elbow | 1 |
| 23***49 | Sensor Group-Speed; -Crankshaft Speed-Timing, Crankshaft | 1 |
| 23***55 | Adapter-O-Ring | 1 |
251-0542 Panel Gp-Switch -Engine Speed, Start
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
| 18***08 | Knob As; (Throttle Position) | 1 |
243-1555 Sensor Gp-Engine
| 09***61 | Strap; (Cable) | 2 |
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
| 24***55 | Sensor Group-Engine; (Temperature, Pressure) | 1 |
178-2345 Sensor Gp-Liquid Level
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
222-8367 Sensor Gp-Liquid Level -Water Separator
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 22***67 | Sensor Group-Liquid Level; -Water Separator | 1 |
239-5674 Sensor Gp-Pressure
| 20***15 | Sensor Group-Speed; -Low Output | 1 |
| 22***47 | Seal-O-Ring | 1 |
| 23***74 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
239-2395 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 23***95 | Sensor Group-Pressure; -Atmospheric Air | 1 |
194-6722 Sensor Gp-Pressure
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 2 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
239-2396 Sensor Gp-Pressure
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
| 23***78 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
239-3478 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
276-9067 Sensor Gp-Pressure
| 20***16 | Sensor Group-Speed; -Torque Converter Output | 1 |
| 22***47 | Seal-O-Ring | 1 |
| 27***67 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
194-6725 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 2 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
230-7149 Sensor Gp-Speed
| 13***45 | Pad; (Connector) | 1 |
| 23***49 | Sensor Group-Speed; -Crankshaft Speed-Timing, Crankshaft | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
279-9828 Sensor Gp-Speed
| 1B***81 | Clip (2"Long) | 1 |
| 23***17 | Fitting As; (Ether Starting Aid) | 1 |
| 23***72 | Plate As | 1 |
189-5746 Sensor Gp-Speed
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
239-2397 Sensor Gp-Speed
| 13***45 | Pad; (Connector) | 1 |
| 23***97 | Sensor Group-Speed; -Timing, Camshaft | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
234-5013 Sensor Gp-Temperature
| 1B***81 | Clip (2"Long) | 1 |
| 23***17 | Fitting As; (Ether Starting Aid) | 1 |
| 23***72 | Plate As | 1 |
274-7396 Sensor Gp-Temperature
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
274-7395 Sensor Gp-Temperature
| 22***65 | Starting Aid Group-Ether | 1 |
| 22***44 | Battery & Wiring Group; -Cold Weather | 1 |
| 23***08 | Wiring Group-Auxiliary Start Receptacle | 1 |
222-8365 Starting Aid Gp-Ether
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
| 22***65 | Starting Aid Group-Ether | 1 |
243-1066 Starting Ar-Cold Weather
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
269-4977 Starting Motor Gp-Electric
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
| 26***29 | Seal-Connector; (3-cm) | 1 |
269-2757 Starting Motor Gp-Electric
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
7n-0719 Switch Gp-Disconnect -Battery
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***10 | Seal | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
125-1302 Switch Gp-Magnetic -Start Relay
| 10***10 | Seal | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 23***13 | Switch Group-Position; -Hydraulic Lockout | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
275-1253 Switch Gp-Pressure
| 23***78 | Switch Group-Toggle; -Quick Coupler-Quick Coupler Lock | 1 |
| 23***79 | Harness As-Wiring; (Quick Coupler Switch) | 1 |
| 25***84 | Bracket As; (Quick Coupler) | 1 |
106-0107 Switch Gp-Rotary -Throttle Position-Engine Speed
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
319-4420 Switch Gp-Rotary -Throttle Position
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 31***20 | Switch Group-Rotary; -Throttle Position | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
238-2485 Switch Gp-Toggle -Quick Coupler Lock
| 09***23 | Screw; (M3x0.5x10-mm) | 3 |
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 3 |
239-1134 Valve Gp-Ether Starting
| 16***28 | Relay; (24-Volt)(Quick Cplr Lever, On Position) | 3 |
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
231-1708 Wiring Gp-Aux Start Receptacle
| 10***75 | Switch As-Toggle; (Hydraulic Attachment Control) | 1 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 4 |
| 23***08 | Plug As-Connector; (4-Pin) | 1 |
267-7642 Wiring Gp-Cab -Coupler
| 11***36 | Clip | 7 |
| 11***38 | Clip | 1 |
| 11***39 | Strap | 1 |
238-1533 Wiring Gp-Cab
| 11***18 | Clip | 4 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
227-7084 Wiring Gp-Cab
| 11***18 | Clip | 1 |
| 22***84 | Wiring Group-Cab | 1 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
238-2158 Wiring Gp-Cab Riser
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 3 |
291-7567 Wiring Gp-Chassis
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***95 | Strap; (Cable) | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
259-4889 Wiring Gp-Chassis -Quick Coupler
| 23***36 | Wiring Group-Console; -Lh | 1 |
| 23***37 | Wiring Group-Console; -Rh | 1 |
| 25***89 | Wiring Group-Chassis; -Quick Coupler | 1 |
227-7139 Wiring Gp-Combined Flow
| 10***65 | Terminal; (Female) | 13 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
259-5257 Wiring Gp-Communication -Product Link 121sr
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 2 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
| 20***81 | Converter-Power; (24-Volt To 12-Volt) | 1 |
231-1836 Wiring Gp-Console -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***36 | Clip | 2 |
| 11***18 | Clip | 1 |
231-1837 Wiring Gp-Console -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***36 | Clip | 3 |
| 11***37 | Clip | 2 |
231-1835 Wiring Gp-Console
| 13***00 | Clip; (Tab) | 1 |
| 13***89 | Clip; (Ladder) | 2 |
| 15***75 | Ladder Clip | 2 |
247-0899 Wiring Gp-Converter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***18 | Clip | 3 |
| 13***89 | Clip; (Ladder) | 1 |
354-0045 Wiring Gp-Electronic Control
| 11***36 | Clip | 2 |
| 28***19 | Harness As-Solenoid | 1 |
| 35***45 | Wiring Group-Electronic Control | 1 |
219-7462 Wiring Gp-Electronic Control
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
238-2273 Wiring Gp-Fan -Reversing
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 17***63 | Receptacle As | 1 |
| 23***60 | Harness As-Engine; (Unit Injector) | 1 |
227-7143 Wiring Gp-Fine Swing
| 22***04 | Motor & Mtg Group-Travel | 1 |
| 22***45 | Drive Group-Final; (Without Motor) | 1 |
| 22***43 | Wiring Group-Fine Swing | 1 |
227-7137 Wiring Gp-Hammer -1-Pump/2-Pump, 1-Way, Foot Sw
| 09***84 | Washer; (40.3x72x1-mm Thk) | 6 |
| 09***91 | Pin - Spring | 7 |
| 09***16 | Setscrew-Socket; (M12x1.75x12-mm) | 2 |
238-2155 Wiring Gp-Platform
| 11***99 | Sprocket Group; (Non-Segmented) | 2 |
| 22***44 | Final Drive Group; (With Motor) | 2 |
| 22***46 | Drive Group-Swing; -With Motor, Lh | 1 |
281-4518 Wiring Gp-Quick Coupler
| 12***96 | Sprocket; (Track) | 1 |
| 28***18 | Wiring Group-Quick Coupler; -Universal Quick Coupler | 1 |
| 2B***61 | Cork-- Compression Release Shaft Hole | 2 |
230-0961 Wiring Gp-Unit Injector
| 22***78 | Box Group-Storage | 1 |
| 23***61 | Wiring Group-Unit Injector | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 6 |
238-2208 Switch Gp-Wiper -Lower
| 11***37 | Clip | 1 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 2 |
| 15***66 | Plug As-Connector; (26-Pin) | 1 |
Engine Arrangement
287-0160 Engine Ar
| 22***53 | Muffler Group | 1 |
| 28***46 | Engine Ar-Complete | 1 |
| 28***60 | Engine Ar | 1 |
280-3646 Engine Ar-Complete
| 11***87 | Cover Group-Front Housing | 1 |
| 11***91 | Seal Group-Crankshaft; -Single Lip | 1 |
| 11***65 | Plug Group-Cylinder Block; -Oil Gallery, End | 1 |
267-0009 Engine Ar-Core
| 21***72 | Housing Group-Front | 1 |
| 22***88 | Gear Group-Front | 1 |
| 22***75 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
317-9990 Engine Ar-Core
| 21***72 | Housing Group-Front | 1 |
| 22***88 | Gear Group-Front | 1 |
| 22***75 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
359-0361 Engine Ar-Core
| 13***49 | Extension Group-Exhaust; (Exhaust) | 1 |
| 21***61 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 21***62 | Fan Group-Suction | 1 |
253-8291 Installation Ar-Engine
| 13***89 | Clip; (Ladder) | 1 |
| 25***91 | Installation Ar-Engine | 1 |
| 27***89 | Seal | 1 |
Frame And Body
223-2977 Box & Mtg Gp-Storage
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 6 |
| 16***10 | Hinge | 2 |
| 22***77 | Box & Mtg Group-Storage | 1 |
223-2978 Box Gp-Storage
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 6 |
| 22***78 | Box Group-Storage | 1 |
| 23***47 | Hinge | 2 |
260-8786 Counterweight Gp
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***08 | Shim; (2-mm Thk) | 1 |
| 13***28 | Shim; (0.5-mm Thk) | 2 |
223-2969 Cover Gp-Access -Air Cleaner
| 09***20 | Spacer; (25x44x6-mm Thk) | 54 |
| 11***32 | Bolt-Hex Head; (M24x3x140mm) | 70 |
| 14***73 | Bolt; (M24x3x150-mm) | 54 |
262-2212 Cover Gp-Hood
| 22***75 | Seal-Dust | 2 |
| 26***12 | Cover Group-Hood | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
298-3154 Door Gp-Access -Pump Compartment
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 29***54 | Door Group-Access; -Pump Compartment | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
320-5466 Door Gp-Access
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 63 |
| 14***95 | Plate As | 2 |
| 23***24 | Sheet As | 1 |
298-3148 Door Gp-Access -Air Cleaner, Battery
| 22***37 | Gear & Bearing Group-Swing | 1 |
| 22***53 | Gear & Bearing Group-Swing | 1 |
| 29***48 | Door Group-Access; -Air Cleaner, Battery | 1 |
320-5467 Door Gp-Access
| 13***76 | Plate | 4 |
| 13***78 | Plate As | 1 |
| 32***67 | Door Group-Access; -Pump Compartment | 1 |
278-2610 Frame Gp-Upper
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 5 |
| 13***77 | Bolt As; (M12x1.75x35-mm) | 2 |
| 13***78 | Bolt As; (M12x1.75x40-mm) | 2 |
227-6053 Gear & Bearing Gp-Swing
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 14 |
| 1K***50 | Spring | 1 |
| 22***53 | Gear & Bearing Group-Swing | 1 |
227-6036 Gear & Bearing Gp-Swing
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 2 |
| 13***78 | Bolt As; (M12x1.75x40-mm) | 2 |
| 17***79 | Clamp | 1 |
227-6052 Gear & Bearing Gp-Swing
| 13***73 | Bolt As; (M12x1.75x25-mm) | 19 |
| 13***74 | Bolt As; (M12x1.75x25-mm) | 8 |
| 13***77 | Bolt As; (M12x1.75x35-mm) | 4 |
227-6037 Gear & Bearing Gp-Swing
| 10***48 | Seal; (0.5-M Each) | 1 |
| 12***20 | Rod | 3 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 8 |
256-1713 Guard Gp-Bottom -Heavy-Duty
| 13***73 | Bolt As; (M12x1.75x25-mm) | 16 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 9 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
130-4277 Guard Gp-Swivel
| 13***77 | Guard Group-Swivel; (Swivel) | 1 |
| 23***73 | Insulation | 1 |
| 23***10 | Liner | 1 |
223-2982 Handrail Gp
| 22***82 | Handrail Group; -Front, Rh | 1 |
| 23***47 | Hinge | 2 |
| 27***07 | Hood & Guard Group; -Engine | 1 |
250-5058 Handrail Gp
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 14 |
| 1K***50 | Spring | 1 |
| 23***05 | Liner | 1 |
278-2624 Hood & Guard Gp
| 23***92 | Liner | 1 |
| 23***93 | Liner | 1 |
| 23***94 | Liner | 1 |
256-1715 Hood & Guard Gp
| 13***73 | Bolt As; (M12x1.75x25-mm) | 4 |
| 23***86 | Insulation | 1 |
| 23***87 | Insulation | 1 |
223-2967 Hood & Guard Gp
| 10***48 | Seal; (0.5-M Each) | 0 |
| 22***67 | Hood & Guard Group; -Covers, Doors | 1 |
| 23***83 | Liner | 1 |
276-2607 Hood & Guard Gp -Engine
| 23***90 | Liner | 1 |
| 23***91 | Liner | 1 |
| 23***92 | Liner | 1 |
250-5189 Hood As -Engine, Rh
| 24***89 | Liner | 1 |
| 24***90 | Liner | 1 |
| 25***89 | Hood As; -Engine, Rh | 1 |
276-2623 Hood Gp -Reversible Fan
| 10***48 | Seal; (0.5-M Each) | 0 |
| 22***59 | Sheet As | 1 |
| 23***95 | Sheet-Rubber | 1 |
276-2520 Hood Gp-Engine
| 10***48 | Seal; (0.5-M Each) | 0 |
| 23***97 | Insulation | 1 |
| 23***98 | Liner | 1 |
223-3146 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 22***46 | Sheet As-Sound Suppression | 1 |
| 26***87 | Insulation | 1 |
250-5179 Sheet As-Sound Suppression
| 09***19 | Pin, Clevis; (Clevis) | 2 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 26 |
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 1 |
223-3151 Sheet As-Sound Suppression
| 22***51 | Sheet As-Sound Suppression | 1 |
| 24***83 | Liner | 1 |
| 24***84 | Liner | 1 |
223-3160 Sheet As-Sound Suppression
| 22***60 | Sheet As-Sound Suppression | 1 |
| 24***80 | Liner | 1 |
| 24***13 | Liner | 1 |
223-3156 Sheet As-Sound Suppression
| 22***56 | Sheet As-Sound Suppression | 1 |
| 25***66 | Liner | 1 |
| 25***67 | Liner | 1 |
223-3162 Sheet As-Sound Suppression
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 4 |
| 22***62 | Sheet As-Sound Suppression | 1 |
| 23***28 | Sheet-Rubber | 1 |
223-3139 Sheet As-Sound Suppression
| 22***39 | Sheet As-Sound Suppression | 1 |
| 23***00 | Sheet-Rubber | 1 |
| 23***01 | Insulation | 1 |
241-2349 Sheet As-Sound Suppression
| 23***77 | Insulation | 1 |
| 23***78 | Insulation | 1 |
| 24***49 | Sheet As-Sound Suppression | 1 |
241-2282 Sheet As-Sound Suppression
| 13***98 | Step As | 2 |
| 24***82 | Sheet As-Sound Suppression | 1 |
| 8T***38 | Bolt-Pipe As To Main Pump Suction Port | 8 |
223-3184 Sheet As-Sound Suppression
| 13***97 | Step As | 2 |
| 22***84 | Sheet As-Sound Suppression | 1 |
| 8T***38 | Bolt-Pipe As To Main Pump Suction Port | 8 |
244-7793 Sheet As-Sound Suppression
| 13***73 | Bolt As; (M12x1.75x25-mm) | 43 |
| 13***74 | Bolt As; (M12x1.75x25-mm) | 2 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 12 |
241-2391 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 23***79 | Liner | 1 |
| 23***49 | Liner | 1 |
223-3153 Sheet As-Sound Suppression
| 22***53 | Sheet As-Sound Suppression | 1 |
| 24***48 | Insulation | 1 |
| 24***49 | Insulation | 1 |
223-3158 Sheet As-Sound Suppression
| 22***58 | Sheet As-Sound Suppression | 1 |
| 24***95 | Liner | 1 |
| 24***23 | Liner | 1 |
289-6591 Sheet As-Sound Suppression
| 22***14 | Handrail As | 1 |
| 26***42 | Walkway As | 2 |
| 26***23 | Walkway As | 1 |
275-5402 Step Gp
| 11***97 | Roller Ar-Track & Carrier | 1 |
| 15***88 | Guard Group-Track Guide; -Center | 1 |
| 16***87 | Guard Group-Travel Motor | 1 |
153-1670 Step Gp
| 09***09 | Ring-Back Up; (Backup) | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 15***70 | Step Group | 1 |
250-5174 Support As-Enclosure
| 10***24 | Support As | 16 |
| 13***99 | Pipe | 16 |
| 14***48 | Bolt-Hex Head; (M24x3x350mm) | 16 |
250-5169 Support As-Enclosure
| 15***24 | Guard As-Track Guide | 2 |
| 25***69 | Support As-Enclosure; (Enclosure) | 1 |
| 7X***76 | Bolt; (M24x3x70-mm) | 16 |
223-3087 Support Gp-Hood -Includes Cover
| 09***80 | Setscrew; (Socket) (M16x2x20mm) | 4 |
| 22***87 | Support Group-Hood; (Sound Suppression)(Counterweight) | 1 |
| 24***52 | Idler Group-Front | 2 |
223-2966 Support Gp-Hood
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 14 |
| 17***72 | Cover; (Rh) | 1 |
| 17***73 | Cover; (Lh) | 1 |
269-5791 Walkway Gp
| 09***09 | Pin | 2 |
| 10***68 | Seal Group-Duo-Cone | 2 |
| 11***70 | Bearing; (Front Idler) | 2 |
Fuel System
239-6581 Cooler Gp-Fuel
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 23***81 | Cooler Group-Fuel | 1 |
| 27***20 | Bowl As; (Fuel, Water Separator) | 1 |
246-3265 Filter Gp-Fuel
| 19***68 | Base As-Fuel Filter | 1 |
| 22***52 | Filter Group-Fuel; -With Water Separator | 1 |
| 24***65 | Filter Group-Fuel | 1 |
225-4152 Filter Gp-Fuel
| 00***62 | Elbow (To Primary Filter Base) | 1 |
| 03***88 | Connector-Tube Assembly To Main Relief | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
225-4153 Filter Gp-Water Sep & Fuel
| 22***53 | Filter Group-Water Sep & Fuel | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9X***50 | Connector-O-Ring; (O-Ring Port) | 1 |
117-0183 Fitting Gp-Fuel Lines
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 11***83 | Fitting Group-Fuel Supply; (Supply)(Supply) | 1 |
| 23***58 | Block | 2 |
223-3095 Gauge Gp-Sight -Fuel Level
| 22***95 | Gauge Group-Sight; -Fuel Level | 1 |
| 23***28 | Seal-O-Ring; (32.99mm Id) | 1 |
| 23***75 | Seal-O-Ring; (36.09mm Id) | 1 |
249-0713 Injector Gp-Fuel
| 00***62 | Elbow (To Primary Filter Base) | 1 |
| 03***42 | Elbow Hose Assembly To | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
246-4786 Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 4 |
| 09***63 | Grommet | 1 |
307-7706 Lines Gp-Fuel
| 22***91 | Clamp-Injector | 1 |
| 24***13 | Injector Group-Fuel | 1 |
| 30***06 | Lines Group-Fuel | 1 |
248-9354 Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 4 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
253-1461 Pump Gp-Fuel Injection
| 18***23 | Pump As-Fuel Priming | 1 |
| 25***61 | Pump Group-Fuel Injection | 1 |
| 8T***05 | Washer, Flat-Thin(1/4); W/O Freespool Qty Is 12 | 1 |
183-2824 Pump Gp-Fuel Priming
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 2 |
| 18***24 | Pump Group-Fuel Priming; -Manual | 1 |
| 31***64 | Pump Group-Fuel Transfer | 1 |
356-1881 Pump Gp-Fuel Prm & Prim Filter
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 35***81 | Pump Group-Fuel Prm & Prim Filter | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
227-5723 Pump Gp-Fuel Transfer
| 09***07 | Shim (0.4mm Thick) | 4 |
| 09***08 | Shim (1.0mm Thick) | 4 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 2 |
235-6387 Regulator Gp-Fuel Pressure
| 06***13 | Connector-Flared | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
223-2974 Tank & Mtg Gp-Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 22***74 | Tank & Mtg Group-Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
248-9372 Tank Gp-Fuel
| 24***72 | Tank Group-Fuel | 1 |
| 9X***37 | Seal-O-Ring | 1 |
281-2725 Valve Gp-Check -Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
139-6873 Valve Gp-Fuel Bypass -Filter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***73 | Valve Group-Fuel Bypass; -Filter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
Hydraulic System
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 13***28 | Shim; (0.1-mm Thk) | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
199-7447 Accumulator Gp-Hydraulic -Uncharged
| 19***47 | Accumulator Group-Hydraulic; -Uncharged-Pilot Oil | 1 |
| 22***55 | Lines Group-Boom Cylinder; -Boom Lowering Control | 1 |
| 22***67 | Film Group; -Boom Float | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 19***88 | Film Group; -Coupler Operation | 1 |
| 22***61 | Lines Group-Pilot; -Quick Coupler | 1 |
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 15***39 | Piston | 1 |
| 15***41 | Piston | 1 |
| 15***42 | Guide | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 20***41 | Control & Mtg Group-Joystick; -With Slide Control | 1 |
| 22***26 | Control & Mtg Group-Implement | 1 |
164-6981 Accumulator Gp-Hydraulic -Charged
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 22***37 | Wiring Group-Hammer; -1-Pump/2-Pump, 1-Way, Foot Sw | 1 |
| 22***62 | Film Group; -1-Pump/2-Pump, 1-Way, Foot Sw | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 22***55 | Lines Group-Boom Cylinder; -Boom Lowering Control | 1 |
| 22***67 | Film Group; -Boom Float | 1 |
209-5982 Actuator Gp
| 20***82 | Actuator Group; -Hydraulic Fan Pump | 1 |
| 26***42 | Wiring Group-Cab; -Quick Coupler | 1 |
| 26***16 | Film Group; -Quick Coupler | 1 |
177-2617 Block Gp-Hydraulic
| 17***17 | Block Group-Hydraulic | 1 |
| 23***73 | Wiring Group-Fan; -Reversing | 1 |
| 24***31 | Motor & Mtg Group-Hydraulic Fan; -Reversing | 1 |
313-3887 Control Ar-Auxiliary -Boom Float
| 11***94 | Lines Group-Bucket Cylinder; (Bucket Cylinder) | 1 |
| 22***28 | Cylinder & Seal Group-Bucket | 1 |
| 31***87 | Control Ar-Auxiliary; -Boom Float | 1 |
228-8238 Control Ar-Auxiliary -Boom Float
| 22***22 | Cylinder & Seal Group-Boom | 1 |
| 22***38 | Control Ar-Auxiliary; -Boom Float | 1 |
| 24***32 | Lines Group-Boom Cylinder; -Lh | 1 |
239-8948 Control Ar-Auxiliary -System 3
| 22***22 | Cylinder & Seal Group-Boom | 1 |
| 23***48 | Control Ar-Auxiliary; -System 3, 1-Way, 2-Pump | 1 |
| 24***33 | Lines Group-Boom Cylinder; -Rh | 1 |
200-6733 Control Ar-Auxiliary -Combined Function, Aux Pump
| 09***11 | Pin; (Spring) | 4 |
| 17***71 | Bolt; (M20x2.5x65-mm) | 4 |
| 20***33 | Control Ar-Auxiliary; -Combined Function, Auxiliary Pump | 1 |
230-0134 Control Ar-Coupler
| 22***31 | Cylinder & Seal Group-Bucket | 1 |
| 23***34 | Control Ar-Coupler | 1 |
| 23***03 | Lines Group-Bucket Cylinder | 1 |
276-2833 Control Ar-Coupler -Quick
| 12***73 | Lines Group-Stick Cylinder; (Stick Cylinder) | 1 |
| 22***25 | Cylinder & Seal Group-Stick | 1 |
| 27***33 | Control Ar-Coupler; -Quick | 1 |
284-7995 Control Ar-Fan -Reversing
| 24***38 | Cylinder & Seal Group-Stick | 1 |
| 24***34 | Lines Group-Stick Cylinder | 1 |
| 28***95 | Control Ar-Fan; -Reversing | 1 |
324-4184 Coupling Gp-Flexible
| 22***23 | Cylinder Group-Boom | 1 |
| 32***84 | Coupling Group-Flexible | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
266-6214 Coupling Gp-Pump
| 22***29 | Cylinder Group-Bucket | 1 |
| 26***14 | Coupling Group-Pump | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
225-4520 Cylinder & Lines Gp-Boom -Lh
| 22***20 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 22***32 | Cylinder Group-Bucket | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
225-4521 Cylinder & Lines Gp-Boom -Rh
| 22***21 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 22***26 | Cylinder Group-Stick | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
225-4530 Cylinder & Lines Gp-Bucket
| 08***50 | Ring; (Back Up) | 1 |
| 08***51 | Head | 1 |
| 09***35 | Seal-O-Ring (Id=149.60mm) | 1 |
225-4527 Cylinder & Lines Gp-Bucket
| 22***27 | Cylinder & Lines Group-Bucket; -Tb-Family | 1 |
| 24***39 | Cylinder Group-Stick | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
242-6837 Cylinder & Lines Gp-Stick
| 08***79 | Bearing; (Sleeve) | 1 |
| 09***26 | Seal-O-Ring | 1 |
| 11***61 | Bearing; (Sleeve) | 1 |
225-4524 Cylinder & Lines Gp-Stick
| 08***33 | Bearing-Sleeve; (106.2mm Od) | 1 |
| 08***48 | Bearing-Sleeve; (120mm Lg) | 1 |
| 08***50 | Ring; (Back Up) | 1 |
225-4522 Cylinder & Seal Gp-Boom
| 16***23 | Kit-Valve; (Quick Coupler)(Lock) | 1 |
| 21***22 | Kit-Seal; (Quick Coupler Lock Cylinder) | 1 |
| 22***22 | Cylinder & Seal Group-Boom | 1 |
225-4528 Cylinder & Seal Gp-Bucket
| 09***28 | Fitting-Grease | 2 |
| 10***40 | Seal-O-Ring; (12.1-mm Id) | 1 |
| 17***06 | Valve Group-Check; (Hydraulic Cylinder, Quick Coupler) | 1 |
225-4531 Cylinder & Seal Gp-Bucket
| 09***28 | Fitting-Grease | 2 |
| 10***40 | Seal-O-Ring; (12.1-mm Id) | 1 |
| 17***06 | Valve Group-Check; (Hydraulic Cylinder, Quick Coupler) | 1 |
242-6838 Cylinder & Seal Gp-Stick
| 08***90 | Stop | 1 |
| 08***93 | Ring-Retaining | 1 |
| 08***97 | Ring-Backup | 1 |
225-4525 Cylinder & Seal Gp-Stick
| 08***90 | Stop | 1 |
| 08***93 | Ring-Retaining | 1 |
| 08***97 | Ring-Backup | 1 |
225-4523 Cylinder Gp-Boom
| 22***23 | Cylinder Group-Boom | 1 |
| 23***20 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
225-4529 Cylinder Gp-Bucket
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 8 |
| 22***29 | Cylinder Group-Bucket | 1 |
| 29***41 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
225-4532 Cylinder Gp-Bucket
| 17***64 | Bearing | 1 |
| 20***98 | Seal-0-Ring; (Id=29.40mm) | 1 |
| 22***17 | Plate | 1 |
269-2106 Cylinder Gp-Coupler
| 22***05 | Motor & Mtg Group-Swing | 1 |
| 22***14 | Drive Group-Swing; -Without Motor, Rh | 1 |
| 26***06 | Cylinder Group-Coupler | 1 |
169-0753 Cylinder Gp-Coupler -Lock
| 16***53 | Cylinder Group-Coupler; -Lock | 1 |
| 22***05 | Motor & Mtg Group-Swing | 1 |
| 22***13 | Drive Group-Swing; -Without Motor, Lh | 1 |
324-2645 Cylinder Gp-Hydraulic
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***84 | Washer; (40.3x72x1-mm Thk) | 8 |
225-4526 Cylinder Gp-Stick
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***84 | Washer; (40.3x72x1-mm Thk) | 8 |
242-6839 Cylinder Gp-Stick
| 09***55 | Pin | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***39 | Cylinder Group-Stick | 1 |
295-9441 Drive Gp-Auxiliary Pump -Accessory Drive
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
225-4515 Drive Gp-Auxiliary Pump
| 18***84 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 22***15 | Drive Group-Auxiliary Pump | 1 |
| 28***36 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
234-4620 Drive Gp-Auxiliary Pump -Accessory Drive
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
227-6113 Drive Gp-Swing -Without Motor, Lh
| 09***63 | Seal-O-Ring (Id=54.40mm) | 2 |
| 09***82 | Seal-O-Ring | 1 |
| 12***03 | Seal-O-Ring (Id=185mm) | 1 |
227-6047 Drive Gp-Swing -With Motor, Rh
| 09***81 | Seal-O-Ring | 1 |
| 13***23 | Seal-O-Ring | 4 |
| 13***24 | Screw; (M3x0.5x5-mm) | 8 |
227-6046 Drive Gp-Swing -With Motor, Lh
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
| 22***46 | Drive Group-Swing; -With Motor, Lh | 1 |
227-6114 Drive Gp-Swing -Without Motor, Rh
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***14 | Drive Group-Swing; -Without Motor, Rh | 1 |
| 23***57 | Pipe | 1 |
227-6050 Fastener Gp-Swing & Final Dr
| 09***23 | Ring-Retaining; (External) | 1 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 4 |
| 12***70 | Sleeve | 1 |
188-2084 Filter & Valve Gp-Pilot -Hydraulic Oil
| 18***84 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 22***55 | Pump & Mtg Group-Main Hydraulic | 1 |
| 22***30 | Tank & Mtg Group-Hydraulic | 1 |
289-7836 Filter & Valve Gp-Pilot -Hydraulic Oil
| 10***82 | Bolt-Self-Locking; (M16x2x45-mm) | 8 |
| 14***83 | Tube As | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***57 | Screw-Machine; (M6x1x8.6-mm) | 4 |
| 12***03 | Seal-O-Ring (Id=185mm) | 1 |
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 13***96 | Plate | 1 |
| 17***60 | Clip | 12 |
| 18***33 | Plate | 1 |
188-4145 Filter Gp-Oil -Hydraulic Return
| 13***96 | Plate | 1 |
| 17***60 | Clip | 12 |
| 18***33 | Plate | 1 |
126-2075 Filter Gp-Oil -Hydraulic, Case Drain
| 10***82 | Bolt-Self-Locking; (M16x2x45-mm) | 8 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 18***15 | Tube As | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 20***01 | Clip | 8 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***58 | Support As | 2 |
247-8926 Head Gp-Pump
| 20***01 | Clip | 8 |
| 23***58 | Support As | 2 |
| 23***60 | Support As | 2 |
342-1828 Head Gp-Pump
| 10***82 | Bolt-Self-Locking; (M16x2x45-mm) | 4 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
| 1P***05 | Seal (Check Valve Outlet) | 3 |
177-2620 Housing Gp-Filter
| 12***48 | Plate | 1 |
| 12***09 | Clip | 12 |
| 12***14 | Clip | 14 |
255-5735 Hydraulic Ar
| 13***96 | Plate | 1 |
| 17***90 | Plate | 1 |
| 17***60 | Clip | 12 |
230-0114 Lines Gp-Auxiliary Hydraulic -Boom, Medium Pressure
| 12***48 | Plate | 1 |
| 12***09 | Clip | 12 |
| 12***14 | Clip | 14 |
247-9307 Lines Gp-Auxiliary Hydraulic -Mass Boom, High Pressure
| 10***50 | Clamp | 4 |
| 12***11 | Support As. | 2 |
| 13***13 | Band; (Marker) (Gray, P) | 4 |
230-0128 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 13***26 | Hose As (Nom 13, L=1100mm) | 1 |
| 14***57 | Union Bulkhead; (Orfs) | 1 |
| 14***52 | Union As | 2 |
230-0123 Lines Gp-Auxiliary Hydraulic -Stick, Medium Pressure
| 10***82 | Bolt-Self-Locking; (M16x2x45-mm) | 4 |
| 14***04 | Tube As | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
242-6543 Lines Gp-Auxiliary Hydraulic -Boom, High Pressure
| 10***63 | Hose As; (Nom 08, L=4150mm) | 1 |
| 14***57 | Union Bulkhead; (Orfs) | 1 |
| 14***52 | Union As | 2 |
242-6548 Lines Gp-Auxiliary Hydraulic -Stick, Medium Pressure
| 09***86 | Bolt; (M12x1.75x55-mm) | 18 |
| 12***06 | Clip | 4 |
| 12***07 | Grommet | 3 |
242-6547 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 09***86 | Bolt; (M12x1.75x55-mm) | 18 |
| 12***06 | Clip | 4 |
| 12***07 | Grommet | 3 |
247-9306 Lines Gp-Auxiliary Hydraulic -Boom, High Pressure
| 09***86 | Bolt; (M12x1.75x55-mm) | 18 |
| 12***06 | Clip | 4 |
| 12***07 | Grommet | 3 |
242-6544 Lines Gp-Auxiliary Hydraulic -Long Reach Boom, Medium Pressure
| 14***52 | Union As | 2 |
| 15***38 | Plate | 1 |
| 17***35 | Clip | 2 |
135-4096 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 13***96 | Lines Group-Auxiliary Hydraulic; -Stick, High Pressure | 1 |
| 20***01 | Clip | 8 |
| 23***58 | Support As | 2 |
230-0117 Lines Gp-Auxiliary Hydraulic -Mass Boom, Medium Pressure
| 12***48 | Plate | 1 |
| 12***09 | Clip | 12 |
| 12***14 | Clip | 14 |
230-0120 Lines Gp-Auxiliary Hydraulic -Stick, Medium Pressure
| 12***48 | Plate | 1 |
| 12***09 | Clip | 12 |
| 12***14 | Clip | 12 |
253-6383 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 10***74 | Guard; (20-cm) | 0 |
| 10***50 | Clamp | 2 |
| 12***91 | Support As | 1 |
127-6690 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 10***82 | Bolt-Self-Locking; (M16x2x45-mm) | 8 |
| 12***90 | Lines Group-Auxiliary Hydraulic; -Stick, High Pressure | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
248-9445 Lines Gp-Boom
| 24***97 | Hose As | 1 |
| 24***45 | Lines Group-Boom | 1 |
| 31***33 | Hose As | 1 |
230-0138 Lines Gp-Boom -Reach Boom, Stick Load Control
| 10***50 | Clamp | 2 |
| 12***11 | Support As. | 1 |
| 14***42 | Tube As | 1 |
245-4930 Lines Gp-Boom
| 12***56 | Support As | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
| 22***73 | Support As | 1 |
230-0140 Lines Gp-Boom -Mass Boom, Stick Load Control
| 10***50 | Clamp | 2 |
| 12***11 | Support As. | 1 |
| 14***43 | Tube As | 1 |
262-3474 Lines Gp-Boom -Long Reach, Stick Load Control
| 26***74 | Lines Group-Boom; -Long Reach, Stick Load Control | 1 |
| 32***62 | Hose As | 1 |
| 32***63 | Hose As | 1 |
227-0455 Lines Gp-Boom Cylinder -Boom Lowering Control
| 13***80 | Clip | 5 |
| 15***00 | Plate | 1 |
| 17***74 | Clip As | 1 |
239-1824 Lines Gp-Boom Cylinder -Boom Cylinder
| 13***80 | Clip | 2 |
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
245-4932 Lines Gp-Boom Cylinder -Lh
| 13***80 | Clip | 5 |
| 17***74 | Clip As | 1 |
| 17***35 | Clip | 12 |
245-4933 Lines Gp-Boom Cylinder -Rh
| 13***80 | Clip | 2 |
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
115-8694 Lines Gp-Bucket Cylinder
| 11***94 | Lines Group-Bucket Cylinder; (Bucket Cylinder) | 1 |
| 14***19 | Reducer As | 1 |
| 17***25 | Tube As | 2 |
239-1603 Lines Gp-Bucket Cylinder
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 09***84 | Locknut; (M12x1.75-Thd) | 1 |
| 10***79 | Bolt-Socket Head; (M10x1.5x90-mm) | 4 |
205-7219 Lines Gp-Connecting
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
| 10***84 | Bolt-Socket Head; (M12x1.75x120-mm) | 4 |
| 14***13 | Hose As | 1 |
242-6536 Lines Gp-Coupler -Reach Stick, Tb-Family
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 4 |
| 09***84 | Locknut; (M12x1.75-Thd) | 2 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 8 |
242-6535 Lines Gp-Coupler -Mass Boom
| 11***34 | Tee-O-Ring | 1 |
| 12***25 | Tee | 1 |
| 14***39 | Connector As. | 1 |
277-4424 Lines Gp-Coupler -Tb, Ub-Family
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 8 |
| 14***41 | Connector Group | 1 |
230-0135 Lines Gp-Coupler -Boom
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 1 |
| 09***84 | Locknut; (M12x1.75-Thd) | 1 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
230-0136 Lines Gp-Coupler -Stick, Tb-Family
| 10***36 | Clip | 1 |
| 12***49 | Valve Group-Shuttle | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
227-0584 Lines Gp-Front -System 14, Combined Function
| 08***03 | Hose As | 1 |
| 10***00 | Bolt-Socket Head; (M10x1.5x110-mm) | 6 |
| 10***13 | Hose As | 1 |
248-9598 Lines Gp-Front -1-Pump/2-Pump, 1-Way, Foot Sw
| 08***32 | Hose As (Nom 06, L=900mm) | 1 |
| 08***87 | Grommet | 1 |
| 08***59 | Hose As | 1 |
239-1821 Lines Gp-Front -Implement, Travel
| 08***91 | Hose As (Nom 06, L=2800mm) | 1 |
| 08***59 | Hose As | 1 |
| 08***84 | Hose As. | 1 |
227-0585 Lines Gp-Front -Medium Pressure
| 08***02 | Hose As. | 2 |
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 8 |
| 10***31 | Connector-Filter | 1 |
280-1928 Lines Gp-Front
| 08***56 | 90 Degrees Elbow | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 3 |
| 14***45 | Connector As | 1 |
239-1822 Lines Gp-Hydraulic -Cooler, Pump, Tank, Valve
| 08***91 | Hose As (Nom 06, L=2800mm) | 1 |
| 14***18 | Connector As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
239-1820 Lines Gp-Hydraulic -Hydraulic Tank
| 13***13 | Band; (Marker) (Gray, P) | 2 |
| 14***18 | Connector As | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
260-8085 Lines Gp-Hydraulic Oil Cooler
| 08***59 | Hose As | 1 |
| 08***67 | Hose As (Nom 06, L=700mm) | 1 |
| 10***74 | Hose As | 1 |
260-8130 Lines Gp-Motor -Reversing Fan
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
227-0444 Lines Gp-Pilot -Control Valve, Swing, Swivel
| 08***64 | Hose As (Nom 06, L=1550mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***16 | Fitting | 1 |
227-0445 Lines Gp-Pilot -Pump
| 08***56 | 90 Degrees Elbow | 1 |
| 08***77 | Hose As (Nom 06, L=1600mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
227-0442 Lines Gp-Pilot -Joystick
| 08***56 | 90 Degrees Elbow | 1 |
| 08***77 | Hose As (Nom 06, L=1600mm) | 1 |
| 10***84 | Guard | 1 |
227-0619 Lines Gp-Pilot -Third Pedal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***24 | Bolt-Socket Head; (M12x1.75x100-mm) | 4 |
| 10***50 | Clamp | 2 |
227-0443 Lines Gp-Pilot -Control Valve, Travel Valve
| 17***82 | Hose As; (Nom O6, L=4100mm) | 1 |
| 21***49 | Hose As | 1 |
| 22***43 | Lines Group-Pilot; -Control Valve, Travel Valve | 1 |
227-0461 Lines Gp-Pilot -Quick Coupler
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***03 | Bolt-Socket Head; (M16x2x40-mm) | 4 |
| 12***67 | Plate | 2 |
239-1606 Lines Gp-Pilot -Smartboom
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 17***96 | Receptacle As | 1 |
| 22***59 | Sensor As-Pressure; (1-Pump/2-Pump, 1-Way Flow) | 1 |
227-0458 Lines Gp-Pilot -Stick Load Control Valve
| 08***02 | Hose As. | 1 |
| 08***62 | Hose As | 1 |
| 08***65 | Hose As (Nom 06, L=570mm) | 2 |
260-7891 Lines Gp-Pilot -Pump Control, Shuttle Valve
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
260-8047 Lines Gp-Pilot -Travel, Straight Travel
| 13***93 | Block | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 5 |
| 21***25 | Hose As | 2 |
227-0588 Lines Gp-Pilot
| 14***11 | Plug Group | 1 |
| 17***35 | Hose As | 1 |
| 22***88 | Lines Group-Pilot; -Combined Function, Auxiliary Pump | 1 |
227-0457 Lines Gp-Pilot -Boom Load Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 8 |
227-0460 Lines Gp-Pilot -Heavy Lift
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 1 |
| 12***13 | Plate | 1 |
| 13***50 | Screen As; (Hydraulic Tank) | 1 |
248-9603 Lines Gp-Pilot -2-Pump, 1-Way Flow
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
260-8084 Lines Gp-Pump -Supply
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
227-0586 Lines Gp-Pump -Aux Hyd, Medium Pressure
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
239-1605 Lines Gp-Return -Smartboom
| 09***94 | Clamp, Double | 2 |
| 12***16 | Support As | 2 |
| 14***28 | Connector Assem. | 1 |
227-0456 Lines Gp-Return -Boom Load Control
| 12***09 | Clip | 4 |
| 12***16 | Support As | 2 |
| 13***82 | Support As | 2 |
239-1607 Lines Gp-Sensor -Overload Warning
| 12***09 | Clip | 4 |
| 12***16 | Support As | 2 |
| 13***82 | Support As | 2 |
245-4931 Lines Gp-Stick
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
128-7449 Lines Gp-Stick
| 12***49 | Lines Group-Stick; -Bucket Cylinder | 1 |
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
289-5758 Lines Gp-Stick
| 24***52 | Motor Group-Piston; -Reversing Hydraulic Fan | 1 |
| 28***58 | Lines Group-Stick; -Bucket Cylinder | 1 |
128-7447 Lines Gp-Stick -Reach
| 08***67 | Hose As (Nom 06, L=700mm) | 1 |
| 10***56 | Valve Group-Solenoid; -Anti-Reaction, Fine Swing | 1 |
| 12***32 | Block As | 1 |
128-7445 Lines Gp-Stick -Reach
| 09***94 | Clamp, Double | 2 |
| 12***16 | Support As | 2 |
| 12***45 | Lines Group-Stick; -Bucket Cylinder | 1 |
128-7448 Lines Gp-Stick
| 10***18 | Grommet | 2 |
| 12***48 | Lines Group-Stick; -Bucket Cylinder | 1 |
| 12***47 | Grommet | 2 |
245-5318 Lines Gp-Stick -Reach
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
230-0139 Lines Gp-Stick Cylinder -Load Control
| 1T***32 | Seal-O-Ring; (234.54mm Id) | 1 |
| 23***39 | Lines Group-Stick Cylinder; -Load Control | 1 |
| 23***80 | Motor Group-Piston; -Travel | 1 |
129-5973 Lines Gp-Stick Cylinder
| 12***73 | Lines Group-Stick Cylinder; (Stick Cylinder) | 1 |
| 22***06 | Motor Group-Swing | 1 |
| 6V***00 | Ring; (Retaining) (M35x1.5mm) | 1 |
262-3473 Lines Gp-Stick Cylinder -Stick Lowering Control
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 4 |
| 10***62 | Dowel | 2 |
| 12***85 | Seal-O-Ring | 1 |
245-4934 Lines Gp-Stick Cylinder
| 08***86 | Adapter | 1 |
| 09***72 | Seal - O-Ring (4.80 mm Id) | 2 |
| 09***16 | Sheet | 2 |
255-1812 Lines Gp-Swing Motor -Fine Swing
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 4 |
| 10***62 | Dowel | 2 |
| 12***85 | Seal-O-Ring | 1 |
227-0436 Lines Gp-Travel Motor -Long Undercarriage
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 22***36 | Lines Group-Travel Motor; -Long Undercarriage | 1 |
| 23***48 | Motor Group-Swing | 1 |
239-8998 Manifold Gp-Control -Pilot Oil Supply
| 12***67 | Ring | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 5J***74 | Seal-O-Ring (Id=15.54mm) | 1 |
215-5037 Manifold Gp-Control -Pilot Oil Supply
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
239-8697 Manifold Gp-Control -Pilot Oil Supply
| 23***39 | Bracket As | 1 |
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 24***82 | Guard | 1 |
247-8831 Motor & Mtg Gp-Hydraulic Fan -Reversing
| 13***99 | Pump Group-Gear; -Auxiliary | 1 |
| 23***19 | Seal-O-Ring | 1 |
| 24***31 | Motor & Mtg Group-Hydraulic Fan; -Reversing | 1 |
225-4505 Motor & Mtg Gp-Swing
| 11***19 | Gasket | 1 |
| 22***05 | Motor & Mtg Group-Swing | 1 |
| 25***85 | Gear As | 1 |
225-4504 Motor & Mtg Gp-Travel
| 22***04 | Motor & Mtg Group-Travel | 1 |
| 26***14 | Coupling Group-Pump | 1 |
| 28***84 | Pump Group-Main Hydraulic | 1 |
266-8034 Motor Gp-Piston -Hydraulic Fan
| 24***41 | Bolt; (M10x1.5x30-mm) | 5 |
| 24***71 | Seal-O-Ring | 1 |
| 26***34 | Motor Group-Piston; -Hydraulic Fan | 1 |
232-6180 Motor Gp-Piston -Travel
| 23***80 | Motor Group-Piston; -Travel | 1 |
| 26***14 | Coupling Group-Pump | 1 |
| 31***92 | Pump Group-Main Hydraulic | 1 |
247-8952 Motor Gp-Piston -Reversing Hydraulic Fan
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
| 13***30 | Washer; (12.5x18x1.5-mm Thk) | 4 |
| 13***32 | Kit-Seal; (Gear Pump) | 1 |
225-4506 Motor Gp-Swing
| 22***06 | Motor Group-Swing | 1 |
| 24***41 | Bolt; (M10x1.5x30-mm) | 5 |
| 24***71 | Seal-O-Ring | 1 |
234-4448 Motor Gp-Swing
| 09***82 | Pin-Spring | 4 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***44 | Ring-Retaining | 1 |
334-9975 Motor Gp-Swing
| 09***82 | Pin-Spring | 4 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***44 | Ring-Retaining | 1 |
334-9980 Motor Gp-Swing
| 09***82 | Pin-Spring | 4 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***44 | Ring-Retaining | 1 |
227-0433 Mounting Gp-Main Control Valve
| 13***80 | Plug | 2 |
| 15***25 | Bearing As-Roller | 1 |
| 15***31 | Swashplate | 1 |
122-7768 Plug Gp
| 09***15 | Ring-Retaining | 1 |
| 12***68 | Plug Group; (Control Valve) | 1 |
| 15***54 | Barrel | 1 |
255-2984 Pump & Mtg Gp-Auxiliary
| 09***15 | Ring-Retaining | 1 |
| 15***54 | Barrel | 1 |
| 16***40 | Pin | 3 |
242-6805 Pump & Mtg Gp-Auxiliary
| 15***12 | Piston Assem. | 9 |
| 15***15 | Plate | 1 |
| 15***16 | Guide; (Ball) | 1 |
222-8355 Pump & Mtg Gp-Main Hydraulic
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 13***97 | Cover | 1 |
136-8899 Pump Gp-Gear -Auxiliary
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 1 |
274-2483 Pump Gp-Gear -Pilot
| 08***06 | Shim (2.0 mm Thick) | 6 |
| 08***07 | Shim (1.0 mm Thick) | 6 |
| 08***09 | Shim (0.4 mm Thick) | 6 |
289-7912 Pump Gp-Gear -Pilot
| 22***31 | Tank & Filter Group-Hydraulic | 1 |
| 23***20 | Lines Group-Hydraulic; -Hydraulic Tank | 1 |
| 28***12 | Pump Group-Gear; -Pilot | 1 |
315-4392 Pump Gp-Main Hydraulic
| 22***58 | Lines Group-Pilot; -Stick Load Control Valve | 1 |
| 23***39 | Lines Group-Stick Cylinder; -Load Control | 1 |
| 23***40 | Lines Group-Boom; -Mass Boom, Stick Load Control | 1 |
283-6084 Pump Gp-Main Hydraulic
| 22***55 | Lines Group-Boom Cylinder; -Boom Lowering Control | 1 |
| 22***56 | Lines Group-Return; -Boom Load Control | 1 |
| 22***57 | Lines Group-Pilot; -Boom Load Control | 1 |
342-1826 Pump Gp-Main Hydraulic
| 22***58 | Lines Group-Pilot; -Stick Load Control Valve | 1 |
| 23***38 | Lines Group-Boom; -Reach Boom, Stick Load Control | 1 |
| 25***80 | Valve Group-Main Control; -Stick Load Control, Heavy Lift | 1 |
322-8732 Pump Gp-Main Hydraulic
| 22***58 | Lines Group-Pilot; -Stick Load Control Valve | 1 |
| 23***86 | Valve Group-Main Control | 1 |
| 25***80 | Valve Group-Main Control; -Stick Load Control, Heavy Lift | 1 |
259-0814 Pump Gp-Piston -Hydraulic Fan
| 12***87 | Plug | 1 |
| 12***89 | Spring | 1 |
| 25***14 | Pump Group-Piston; -Hydraulic Fan | 1 |
185-0266 Rotating Gp-Motor
| 09***10 | Seal-O-Ring | 1 |
| 13***85 | Cover | 1 |
| 18***66 | Rotating Group-Motor; -Hydraulic Fan | 1 |
155-9135 Rotating Gp-Pump
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 09***91 | Ring-Backup | 2 |
| 12***35 | Valve | 1 |
273-5126 Rotating Gp-Pump
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
225-4610 Screen Gp-Hydraulic -Tank
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
225-4547 Swivel Gp
| 12***73 | Bolt-Shoulder; (M12x1.75x10-mm) | 4 |
| 12***74 | Retainer | 10 |
| 12***92 | Spring | 1 |
227-0431 Tank & Filter Gp-Hydraulic
| 12***73 | Bolt-Shoulder; (M12x1.75x10-mm) | 4 |
| 12***74 | Retainer | 8 |
| 12***92 | Spring | 1 |
227-0430 Tank & Mtg Gp-Hydraulic
| 22***30 | Tank & Mtg Group-Hydraulic | 1 |
| 25***00 | Valve Group-Relief; -Medium Pressure | 2 |
| 25***01 | Valve Group-Relief; -Cushion, Rotator Motor | 2 |
249-8125 Tank & Mtg Gp-Hydraulic
| 09***98 | Spring, Check | 1 |
| 10***68 | Plug-Pipe | 11 |
| 11***59 | Plug; (Pipe) (3/8-18 Thd) | 3 |
239-8992 Valve Ar-Check & Relief -Stick Load Control, Heavy Lift
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 17***32 | Kit-Seal; (Quick Coupler Valve) | 1 |
230-2710 Valve Ar-Check & Relief -Heavy Lift
| 09***97 | Seal-O-Ring (Id=29.70mm) | 6 |
| 09***91 | Ring-Backup | 6 |
| 12***63 | Cover | 4 |
230-2714 Valve Ar-Check & Relief -Mass Boom, Stick Load Control
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 09***91 | Ring-Backup | 2 |
268-9438 Valve Ar-Check & Relief -Stick Load Control, Heavy Lift
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 09***91 | Ring-Backup | 2 |
239-9036 Valve Gp-Check
| 12***73 | Bolt-Shoulder; (M12x1.75x10-mm) | 4 |
| 12***74 | Retainer | 10 |
| 12***92 | Spring | 1 |
185-0384 Valve Gp-Check -Slow Return
| 12***73 | Bolt-Shoulder; (M12x1.75x10-mm) | 4 |
| 12***74 | Retainer | 8 |
| 12***92 | Spring | 1 |
122-7690 Valve Gp-Check
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 09***91 | Ring-Backup | 2 |
297-0372 Valve Gp-Check
| 09***97 | Seal-O-Ring (Id=29.70mm) | 6 |
| 09***91 | Ring-Backup | 6 |
| 12***63 | Cover | 4 |
297-0370 Valve Gp-Check
| 09***97 | Seal-O-Ring (Id=29.70mm) | 6 |
| 09***91 | Ring-Backup | 6 |
| 12***63 | Cover | 4 |
259-7713 Valve Gp-Control -Heavy Lift, Lh
| 12***08 | Valve Group-Pressure Control; -Boom Ii, Swing | 1 |
| 12***53 | Spring | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
259-7717 Valve Gp-Control -Without Covers, Housings
| 12***08 | Valve Group-Pressure Control; -Boom Ii, Swing | 1 |
| 12***53 | Spring | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
259-7773 Valve Gp-Control -Without Covers, Housings
| 16***13 | Seat | 1 |
| 16***14 | Plug | 1 |
| 22***37 | Plug As | 3 |
259-7715 Valve Gp-Control
| 12***08 | Valve Group-Pressure Control; -Boom Ii, Swing | 1 |
| 12***53 | Spring | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
239-8853 Valve Gp-Control
| 11***29 | Orifice | 1 |
| 12***97 | Ring | 1 |
| 14***92 | Plate | 1 |
232-4103 Valve Gp-Control -Medium Pressure
| 09***22 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***65 | Spring | 2 |
239-8854 Valve Gp-Control -Lh
| 09***76 | Seal-O-Ring | 2 |
| 09***01 | . Body Ass'Y, Setscrew-Socket; (M5x0.8x6-mm) | 1 |
| 12***73 | Ring | 1 |
234-4624 Valve Gp-Control -Reverse Flow Fan
| 12***97 | Ring | 1 |
| 15***41 | Plug | 1 |
| 15***35 | Shim; (0.1-mm Thk) | 3 |
259-7776 Valve Gp-Control
| 25***76 | Valve Group-Control; -Heavy Lift, Rh | 1 |
| 30***66 | Handle | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
259-7779 Valve Gp-Control -Boom Load Control, Rh
| 09***75 | Spring | 1 |
| 09***76 | Guide, Spring | 1 |
| 25***79 | Valve Group-Control; -Boom Load Control, Rh | 1 |
254-3080 Valve Gp-Control -Quick Coupler
| 12***08 | Valve Group-Pressure Control; -Boom Ii, Swing | 1 |
| 12***53 | Spring | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
230-2764 Valve Gp-Control -Lh
| 09***22 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***65 | Spring | 2 |
285-1531 Valve Gp-Control -Medium Pressure
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
230-2763 Valve Gp-Control -Rh
| 23***63 | Valve Group-Control; -Without Covers, Housings | 1 |
| 26***03 | Valve Group-Relief; (160-Bar) (2321-Psi) | 2 |
| 28***77 | Valve Group-Relief; (230-Bar) (3336-Psi) | 2 |
255-5745 Valve Gp-Flow Control
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
4i-7836 Valve Gp-Flow Control
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
263-1964 Valve Gp-Load Control -Boom Cylinder
| 09***00 | Seal-O-Ring | 1 |
| 12***50 | Seal-O-Ring | 1 |
| 18***59 | Ring; (Backup) | 2 |
270-5696 Valve Gp-Load Control
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
263-1965 Valve Gp-Load Control -Stick Lowering
| 12***64 | Body | 1 |
| 26***65 | Valve Group-Load Control; -Stick Lowering | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
259-7780 Valve Gp-Main Control -Stick Load Control, Heavy Lift
| 12***48 | Spring | 1 |
| 12***49 | Valve | 1 |
| 12***51 | Body; (Valve) | 1 |
259-7777 Valve Gp-Main Control -Heavy Lift
| 13***42 | Shim; (1-mm Thk) | 1 |
| 13***43 | Shim; (0.5-mm Thk) | 1 |
| 13***44 | Shim; (0.2-mm Thk) | 1 |
239-8986 Valve Gp-Main Control
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 03***43 | Seal-O-Ring | 1 |
| 13***89 | Plug | 1 |
259-7774 Valve Gp-Main Control
| 10***73 | Seal-O-Ring | 5 |
| 13***42 | Shim; (1-mm Thk) | 1 |
| 13***43 | Shim; (0.5-mm Thk) | 1 |
277-0954 Valve Gp-Manual -Auxiliary, Shutoff
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***13 | Body As | 1 |
| 16***63 | Retainer | 1 |
270-5692 Valve Gp-Manual -Boom Lower
| 12***48 | Spring | 1 |
| 12***49 | Valve | 1 |
| 12***52 | Plug | 1 |
119-5219 Valve Gp-Pilot
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 10***40 | Collar | 1 |
| 10***41 | Ring; (Retaining) | 1 |
206-3305 Valve Gp-Pilot -Joystick
| 03***67 | Ring; (Back Up) | 1 |
| 18***68 | Ring; (Backup) | 2 |
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
285-1327 Valve Gp-Pilot -Joystick
| 23***03 | Valve Group-Relief | 1 |
| 23***04 | Block | 1 |
| 28***27 | Valve Group-Pilot; -Joystick | 1 |
165-9522 Valve Gp-Pilot -Travel
| 03***67 | Ring; (Back Up) | 1 |
| 16***22 | Valve Group-Pilot; -Travel | 1 |
| 18***68 | Ring; (Backup) | 2 |
297-0589 Valve Gp-Pilot -Joystick
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 12***04 | Spring | 1 |
| 17***36 | Adjuster | 1 |
191-5700 Valve Gp-Pilot Relief
| 19***00 | Valve Group-Pilot Relief | 1 |
122-7708 Valve Gp-Pressure Control -Boom Ii, Swing
| 12***08 | Valve Group-Pressure Control; -Boom Ii, Swing | 1 |
232-4102 Valve Gp-Pressure Reducing -Boom, Swing Priority
| 03***67 | Ring; (Back Up) | 1 |
| 18***68 | Ring; (Backup) | 2 |
| 23***02 | Valve Group-Pressure Reducing; -Implement, Swing Priority | 1 |
259-0907 Valve Gp-Pump Control -Hydraulic Fan
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 10***40 | Collar | 1 |
| 10***41 | Ring; (Retaining) | 1 |
140-0672 Valve Gp-Regeneration
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
255-5588 Valve Gp-Regeneration
| 11***85 | Plug | 4 |
| 25***88 | Valve Group-Regeneration | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 4 |
270-5691 Valve Gp-Relief
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 4 |
| 27***91 | Valve Group-Relief | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 8 |
122-7756 Valve Gp-Relief -Negative Flow Control
| 09***78 | Seal-O-Ring (Id=9.80mm) | 7 |
| 10***79 | Plug | 7 |
| 12***56 | Valve Group-Relief; -Negative Flow Control | 1 |
270-5731 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 11***23 | Nut Assem.; (M6x1-Thd) | 1 |
| 27***31 | Valve Group-Relief; -Line | 1 |
270-5730 Valve Gp-Relief
| 11***25 | Plug | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 20***90 | Seal-O-Ring | 4 |
122-7750 Valve Gp-Relief -Negative Flow Control
| 12***50 | Valve Group-Relief; -Negative Flow Control | 1 |
| 12***11 | Tee-Orfs | 1 |
| 12***52 | Connector | 2 |
225-4823 Valve Gp-Relief
| 09***02 | Ring | 2 |
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 2 |
239-9102 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
259-7600 Valve Gp-Relief -Medium Pressure
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 17***98 | Valve Group-Shuttle | 2 |
| 18***07 | Kit-Seal; (Shuttle Valve) | 1 |
184-3830 Valve Gp-Relief -Swing Motor
| 18***30 | Valve Group-Relief; -Swing Motor | 1 |
| 25***33 | Connector | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
239-9103 Valve Gp-Relief
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
259-7601 Valve Gp-Relief -Medium Pressure
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
239-8984 Valve Gp-Relief -Line
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***15 | Seal-O-Ring (Id=12.42mm) | 1 |
239-8983 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
259-7732 Valve Gp-Shuttle
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
123-2549 Valve Gp-Shuttle
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 12***49 | Valve Group-Shuttle | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 2 |
112-0083 Valve Gp-Shuttle
| 11***83 | Valve Group-Shuttle; -Third Pedal, Straight Travel | 1 |
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 24***93 | Block | 1 |
185-0462 Valve Gp-Shuttle
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 18***62 | Valve Group-Shuttle; -Pilot | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
297-0371 Valve Gp-Solenoid
| 09***49 | Seal-O-Ring (Id=175.00mm) | 2 |
| 14***07 | Link | 1 |
| 19***79 | Plate | 2 |
185-0472 Valve Gp-Solenoid
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
242-6880 Valve Gp-Solenoid
| 21***41 | Linkage Group-Bucket; -Ub-Family, Without Hook | 1 |
| 22***30 | Cylinder & Lines Group-Bucket; -Ub, Vb-Family | 1 |
| 24***80 | Valve Group-Solenoid | 1 |
225-4518 Valve Gp-Solenoid
| 08***38 | Plate As | 1 |
| 08***91 | Tube As | 1 |
| 15***19 | Tube As | 1 |
315-4412 Valve Gp-Solenoid
| 08***48 | Bearing-Sleeve; (120mm Lg) | 2 |
| 09***45 | Seal-O-Ring | 2 |
| 09***47 | Seal-O-Ring; (Id=200.00mm) | 2 |
111-9916 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 20***45 | Valve Group-Solenoid & Relief; -1-Way, 2-Way Flow | 1 |
| 23***81 | Block | 1 |
121-1491 Valve Gp-Solenoid
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 22***20 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 22***21 | Cylinder & Lines Group-Boom; -Rh | 1 |
121-6303 Valve Gp-Solenoid
| 12***03 | Valve Group-Solenoid; -Variable Adjustable Boom | 1 |
| 12***47 | Lines Group-Grease; -Boom, Boom Cyls, Stick Cyl | 1 |
| 22***32 | Film Group | 1 |
322-8715 Valve Gp-Solenoid
| 12***45 | Lines Group-Stick; -Bucket Cylinder | 1 |
| 22***22 | Stick Group-Hoe; -Reach | 1 |
| 22***26 | Lines Group-Grease; -Stick, Stick Cyl, Bucket Cyl | 1 |
258-6749 Valve Gp-Solenoid
| 22***27 | Cylinder & Lines Group-Bucket; -Tb-Family | 1 |
| 25***51 | Linkage Group-Bucket; -Tb-Family, With Lifting Eye | 1 |
| 25***49 | Valve Group-Solenoid | 1 |
107-7056 Valve Gp-Solenoid -Anti-Reaction, Fine Swing
| 09***92 | Seal-O-Ring (Id=23.70mm) | 1 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***88 | Ring, Back-Up | 1 |
185-0507 Valve Gp-Solenoid
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 08***40 | Plate | 3 |
| 12***26 | Hose As | 1 |
171-0188 Valve Gp-Solenoid
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
116-3526 Valve Gp-Solenoid
| 03***82 | Seal-O-Ring; (47.3mm Id) | 2 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
225-4558 Valve Gp-Solenoid
| 03***48 | Clip; (11.11mm .437in Id) | 5 |
| 13***37 | Hose As | 1 |
| 13***81 | Tube As | 1 |
328-2035 Valve Gp-Solenoid & Manifold
| 12***47 | Lines Group-Stick; -Bucket Cylinder | 1 |
| 22***32 | Stick Group-Hoe; -Reach | 1 |
| 32***35 | Valve Group-Solenoid & Manifold; -Quick Coupler | 1 |
260-3877 Valve Gp-Solenoid & Manifold
| 22***27 | Stick Group-Hoe; -Reach | 1 |
| 24***18 | Lines Group-Stick; -Reach | 1 |
| 26***77 | Valve Group-Solenoid & Manifold; -Quick Coupler | 1 |
201-9345 Valve Gp-Solenoid & Relief
| 20***45 | Valve Group-Solenoid & Relief; -1-Way, 2-Way Flow | 1 |
| 24***64 | Stick Group-Hoe; -Reach | 1 |
| 24***31 | Lines Group-Stick; -Bucket Cylinder | 1 |
239-8680 Valve Gp-Solenoid & Relief
| 12***48 | Lines Group-Stick; -Bucket Cylinder | 1 |
| 22***40 | Stick Group-Hoe; -Mass | 1 |
| 23***80 | Valve Group-Solenoid & Relief; -1-Way, 2-Way Flow | 1 |
266-7843 Valve Gp-Travel Counterbalance
| 12***49 | Lines Group-Stick; -Bucket Cylinder | 1 |
| 22***47 | Stick Group-Hoe; -Mass | 1 |
| 26***43 | Valve Group-Travel Counterbalance | 1 |
Implements
228-8235 Boom Ar-Long Reach
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
304-8331 Boom Ar-Mass
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
241-7358 Boom Gp
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***22 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
235-7721 Boom Gp -Mass
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
241-7363 Lines Gp-Grease -Boom, Boom Cyls, Stick Cyl
| 23***30 | Adapter-Tip; (K-130, 2-Strap, Center) | 2 |
| 23***31 | Adapter-Tip; (K-130, 2-Strap, Rh) | 1 |
| 23***32 | Adapter-Tip; (K-130, 2-Strap, Lh) | 1 |
127-1347 Lines Gp-Grease -Boom, Boom Cyls, Stick Cyl
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***22 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
228-5426 Lines Gp-Grease -Stick, Stick Cyl, Bucket Cyl
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 1 |
245-5584 Linkage Ar-Bucket -Tb-Family, With Lifting Eye
| 19***67 | Shim; (1.5-mm Thk) | 2 |
| 20***19 | Lines Group-Connecting | 1 |
| 24***84 | Linkage Ar-Bucket; -Tb-Family, With Lifting Eye | 1 |
220-2502 Linkage Ar-Bucket -Ub-Family
| 22***02 | Linkage Ar-Bucket; -Ub-Family, Without Hook | 1 |
| 23***30 | Adapter-Tip; (K-130, 2-Strap, Center) | 2 |
| 23***31 | Adapter-Tip; (K-130, 2-Strap, Rh) | 1 |
219-8341 Linkage Gp-Bucket -Vb-Family
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
| 16***61 | Lock Group-Quick Coupler; -Hydraulic | 1 |
251-2651 Linkage Gp-Bucket -Tb-Family, With Lifting Eye
| 25***51 | Linkage Group-Bucket; -Tb-Family, With Lifting Eye | 1 |
| 27***24 | Lines Group-Coupler; -Tb-Family, Ub-Family | 1 |
| 30***48 | Coupler Ar-Quick | 1 |
220-2496 Stick Ar -Reach
| 09***07 | Bolt; (M16x2x120-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 16***37 | Shaft As | 2 |
220-2493 Stick Ar -Reach
| 09***28 | Fitting-Grease | 2 |
| 12***68 | Rod-Threaded | 1 |
| 18***97 | Bearing | 1 |
220-2494 Stick Ar -Reach
| 09***28 | Fitting-Grease | 2 |
| 12***68 | Rod-Threaded | 1 |
| 18***97 | Bearing | 1 |
228-8236 Stick Ar -Reach
| 20***71 | Washer; (26x90x8-mm Thk) | 2 |
| 22***36 | Stick Ar; -Reach | 1 |
| 23***36 | Pin As | 1 |
220-2500 Stick Ar-Hoe -Mass
| 22***00 | Stick Ar-Hoe; -Mass | 1 |
| 23***36 | Pin As | 1 |
| 23***37 | Lockpin | 1 |
220-2498 Stick Ar-Hoe -Mass
| 15***96 | Film-Notice; (Lift Eye Location) | 1 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
| 22***98 | Stick Ar-Hoe; -Mass | 1 |
228-5447 Stick Gp-Hoe -Mass
| 22***47 | Stick Group-Hoe; -Mass | 1 |
| 22***80 | Air Conditioner & Mounting Group | 1 |
| 22***82 | Duct Group-Cab Air | 1 |
241-7364 Stick Gp-Hoe -Reach
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 24***64 | Stick Group-Hoe; -Reach | 1 |
228-5422 Stick Gp-Hoe -Reach
| 22***22 | Stick Group-Hoe; -Reach | 1 |
| 24***97 | Plate | 8 |
| 24***99 | Screw-Button Head; (M8x1.25x30-mm) | 4 |
228-5432 Stick Gp-Hoe -Reach
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 22***32 | Stick Group-Hoe; -Reach | 1 |
228-5440 Stick Gp-Hoe -Mass
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 22***40 | Stick Group-Hoe; -Mass | 1 |
228-5427 Stick Gp-Hoe -Reach
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 22***27 | Stick Group-Hoe; -Reach | 1 |
| 24***86 | Plate | 2 |
Lubrication System
251-6669 Base Gp-Oil Filter -Engine
| 25***69 | Base Group-Oil Filter; -Engine | 1 |
| 8T***75 | Bolt; (M6x1x50-mm) | 4 |
| 9X***67 | Washer; (6.6x12x2-mm Thk) | 4 |
223-1615 Base Gp-Oil Filter -Engine
| 1A***70 | Spring; (Retainer) | 1 |
| 22***15 | Base Group-Oil Filter; -Engine | 1 |
| 22***05 | Valve As; (Oil Pump Bypass)(Engine Oil) | 1 |
267-0007 Breather Gp -Crankcase
| 26***07 | Breather Group; -Crankcase | 1 |
| 5S***34 | Seal-O-Ring; (97.79mm Id) | 1 |
| 7C***42 | Cover; (Filter Base) | 1 |
117-2786 Cover Gp-Oil Filter Base -Engine
| 06***55 | Seal-O-Ring (Id=47.22mm) | 4 |
| 11***86 | Cover Group-Oil Filter Base; -Engine | 1 |
| 16***61 | Cap As-Engine Oil Filler; (Engine Oil) | 1 |
235-0932 Filler Gp-Engine Oil
| 03***35 | Connector-Flared | 1 |
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
220-7082 Filter Gp-Engine Oil
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 22***82 | Filter Group-Engine Oil | 1 |
| 22***34 | Hose; (Fumes Disposal) | 1 |
220-7133 Fumes Disposal Gp
| 20***09 | Plug | 3 |
| 22***98 | Gauge As-Oil Level (Dipstick); (Engine) | 1 |
| 22***99 | Tube As-Guide | 1 |
220-7097 Gauge Gp-Oil Level (Dipstick) -Engine
| 09***88 | Clamp; (Hose) | 1 |
| 22***97 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
| 5P***43 | Hose 34 cm (13.39 In.) | 0 |
222-8360 Lines Gp-Engine Oil Drain
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 19***18 | Gasket; (Coated Metal) | 1 |
| 19***19 | Gasket; (Coated Metal) | 1 |
224-8170 Lines Gp-Turbocharger Oil
| 22***70 | Lines Group-Turbocharger Oil | 1 |
| 23***65 | Support As | 1 |
| 7D***33 | Clip; (38.1mm Id) | 4 |
222-8362 Mounting Gp-Engine Oil Filter
| 22***62 | Mounting Group-Engine Oil Filter | 1 |
| 6D***46 | Seal-O-Ring (Id=101.27mm) | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 4 |
233-5221 Pump Gp-Engine Oil
| 12***43 | Coupling | 1 |
| 13***45 | Hose; (8cm) | 1 |
| 22***75 | Seal; (Water Pump Outlet) | 1 |
233-5220 Pump Gp-Engine Oil
| 06***61 | Seal-O-Ring (Id=40.87mm) | 1 |
| 23***20 | Pump Group-Engine Oil | 2 |
| 23***48 | Tube As | 1 |
Machine Arrangement
306-7536 Chassis Ar
| 13***77 | Guard Group-Swivel; (Swivel) | 1 |
| 22***67 | Sensor Group-Liquid Level; -Water Separator | 1 |
| 22***66 | Support Group-Hood; (Support) | 1 |
306-7535 General Ar
| 22***42 | Power Train Ar | 1 |
| 23***48 | Frame Ar-Undercarriage | 1 |
| 25***91 | Installation Ar-Engine | 1 |
Operator Station
245-7896 Adjuster Gp-Seat -Lower Slide
| 12***17 | Guard | 2 |
| 17***16 | Grommet | 2 |
| 17***22 | Grommet | 2 |
245-7889 Adjuster Gp-Seat -Upper Slide
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***32 | Motor As; (Hydraulic Fan) | 1 |
| 16***34 | Resistor As; (Hydraulic Fan) | 1 |
229-9080 Air Conditioner & Mounting Gp
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 22***80 | Air Conditioner & Mounting Group | 1 |
229-9079 Air Conditioner Ar
| 22***79 | Air Conditioner Ar | 1 |
| 25***62 | Control Group-Joystick; -Rh | 1 |
| 25***63 | Control Group-Joystick; -Lh | 1 |
316-8812 Air Conditioner Gp
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
| 12***10 | Lever | 1 |
229-9081 Air Conditioner Gp
| 14***34 | Strip | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1A***21 | Grommet | 1 |
259-7346 Armrest Gp -Rh
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
| 12***10 | Lever | 1 |
259-7347 Armrest Gp -Lh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 22***16 | Handle Group-Joystick; (Rh) | 1 |
242-1591 Cab Gp
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 23***73 | Harness As-Heater & Air Cond; (Control Panel Switches) | 1 |
| 24***91 | Cab Group | 1 |
235-8910 Cab Gp -Exterior
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 23***10 | Cab Group; -Exterior | 1 |
235-8908 Cab Gp -Interior
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 23***08 | Cab Group; -Interior | 1 |
242-1592 Cab Gp
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***73 | Pin | 1 |
| 13***74 | Pedal-Rubber | 1 |
245-7836 Coil Gp-Evaporator
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 24***36 | Coil Group-Evaporator | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
276-2403 Compressor Gp-Refrigerant
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
| 27***03 | Compressor Group-Refrigerant | 1 |
245-7786 Condenser & Mtg Gp-Refrigerant
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 24***86 | Condenser & Mtg Group-Refrigerant | 1 |
| 26***27 | Control Group-Handle; -Joystick, Rh | 1 |
245-7787 Condenser Gp-Refrigerant
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 24***87 | Condenser Group-Refrigerant | 1 |
| 26***28 | Control Group-Handle; -Joystick, Lh | 1 |
259-7349 Console Gp-Operator -Lh
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
245-7922 Console Gp-Operator
| 23***69 | Control Group-Handle; -Joystick, Lh | 1 |
| 24***22 | Console Group-Operator | 1 |
| 28***27 | Valve Group-Pilot; -Joystick | 1 |
259-7348 Console Gp-Operator -Rh
| 23***70 | Control Group-Handle; -Joystick, Rh | 1 |
| 25***48 | Console Group-Operator; -Rh | 1 |
| 28***27 | Valve Group-Pilot; -Joystick | 1 |
200-6741 Control & Mtg Gp-Joystick
| 09***72 | Nut | 2 |
| 09***22 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 10***99 | Screw As; (M6x1x16-mm) | 2 |
239-8696 Control Gp-Foot -Work Tool
| 15***77 | Hinge | 2 |
| 17***64 | Door Group; (Cab) | 1 |
| 18***96 | Door As | 1 |
235-8970 Control Gp-Handle -Joystick, Rh
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 17***28 | Bracket As | 2 |
| 18***35 | Lamp Group-Flood | 2 |
260-2109 Control Gp-Handle -Joystick, Rh
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 16***41 | Guard As | 1 |
| 17***86 | Guard As | 1 |
235-8969 Control Gp-Handle -Joystick, Lh
| 10***99 | Screw As; (M6x1x16-mm) | 2 |
| 17***96 | Clip | 5 |
| 23***76 | Duct As; (Fresh Air, Upper) | 1 |
260-2127 Control Gp-Handle -Joystick, Rh
| 08***49 | Packing | 2 |
| 10***81 | Screw-Truss Head | 4 |
| 16***94 | Catch | 1 |
260-2128 Control Gp-Handle -Joystick, Lh
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 17***76 | Horn As; (24-Volt, Low Tone) | 1 |
260-2110 Control Gp-Handle -Joystick, Lh
| 09***06 | Spring As; (Gas) | 2 |
| 10***69 | Bolt As; (M8x1.25x16-mm) | 4 |
| 18***47 | Seal | 1 |
267-3839 Control Gp-Heat & Air Cond
| 18***00 | Screw-Tapping | 6 |
| 19***66 | Relay; (Compressor Clutch) | 4 |
| 24***13 | Motor As | 1 |
225-5730 Control Gp-Hydraulic Pedal
| 15***42 | Lever As | 1 |
| 16***64 | Bracket | 1 |
| 17***41 | Pin | 1 |
259-7763 Control Gp-Joystick -Lh
| 09***45 | Cable; (Lanyard) | 1 |
| 25***63 | Control Group-Joystick; -Lh | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
297-0534 Control Gp-Joystick -Rh
| 12***50 | Film-Instruction; (Travel Controls) | 1 |
| 22***30 | Control Group-Hydraulic Pedal; -Third Pedal, Straight Travel | 1 |
| 22***19 | Lines Group-Pilot; -Third Pedal | 1 |
270-5951 Control Gp-Joystick -Lh
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 17 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
| 24***95 | Receptacle As-Connector; (12-Pin) | 1 |
297-0535 Control Gp-Joystick -Lh
| 13***65 | Grommet | 1 |
| 13***66 | Grommet | 1 |
| 23***62 | Mount As | 4 |
259-7765 Control Gp-Joystick -Lh
| 11***94 | Bar Assem. | 1 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 4 |
| 13***70 | Mirror | 1 |
259-7764 Control Gp-Joystick -Rh
| 11***94 | Bar Assem. | 1 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 4 |
| 13***70 | Mirror | 1 |
270-5952 Control Gp-Joystick -Rh
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 22***79 | Air Conditioner Ar | 1 |
| 23***35 | Wiring Group-Console | 1 |
259-7762 Control Gp-Joystick -Rh
| 10***36 | Clip | 2 |
| 10***74 | Guard; (20-cm) | 0 |
| 10***73 | Clip | 6 |
170-9497 Control Gp-Pilot Operated Hyd -Travel
| 10***04 | Screw As; (M5x0.8x10-mm) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
239-9035 Control Gp-Pilot Operated Hyd
| 23***35 | Control Group-Pilot Operated Hydraulic | 1 |
| 33***08 | Software Group-Communication; (Product Link 121sr) | 1 |
176-1964 Door Gp-Cab
| 17***64 | Door Group; (Cab) | 1 |
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
189-2793 Door & Mtg Gp-Cab
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 6 |
| 18***93 | Door Group-Cab | 1 |
| 25***10 | Screen As; (Cab) | 1 |
229-9082 Duct Gp-Cab Air
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 1 |
| 22***82 | Duct Group-Cab Air | 1 |
216-0611 Guard Gp-Window
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 21***11 | Guard Group-Window | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
215-6662 Guard Gp-Window
| 21***62 | Guard Group-Window | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
139-7099 Hatch Gp-Roof
| 13***99 | Hatch Group; (Roof) | 1 |
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
189-2849 Hatch Gp-Roof
| 18***49 | Hatch Group-Roof; (Roof) | 1 |
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
260-5875 Horn Gp-Electric
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 26***75 | Horn Group-Electric | 1 |
245-7812 Housing Gp-Air Conditioner -Inlet Air
| 22***93 | Seat Group; -High Back, With Heater | 1 |
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
| 24***12 | Housing Group-Air Conditioner; -Inlet Air | 1 |
251-0538 Radio Gp
| 12***53 | Washer; (20.5x30x2-mm Thk) | 1 |
| 15***42 | Relay As; (Upper)(Wiper) | 1 |
| 16***68 | Arm As-Wiper | 1 |
164-0528 Lever Gp-Cab Door
| 16***28 | Lever Group-Cab Door | 1 |
| 23***57 | Support As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
225-5784 Lines Gp-Air Conditioner
| 14***21 | Kit-Clip; (Seat) | 1 |
| 22***84 | Lines Group-Air Conditioner | 1 |
| 24***68 | Cover As | 1 |
7y-0059 Literature Gp
| 24***68 | Cover As | 1 |
| 24***89 | Adjuster Group-Seat; -Upper Slide | 1 |
| 24***90 | Bracket Group-Mounting; -Suspension Seat | 1 |
223-2983 Mirror Gp-Rear View
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***48 | Absorber As-Shock; (Sideshift) | 1 |
| 22***83 | Mirror Group-Rear View; -Front, Rh | 1 |
221-8813 Monitor & Mtg Gp-Operator
| 08***37 | Nozzle As | 1 |
| 10***26 | Adapter As | 1 |
| 10***27 | Packing | 1 |
327-7482 Monitor Gp-Operator
| 09***23 | Screw-Machine; (M6x1x6-mm) | 2 |
| 10***00 | Screw As; (M6x1x20-mm) | 2 |
| 11***06 | Switch; (Window Lower Limit) | 1 |
327-7483 Monitor Gp-Operator
| 12***66 | Stopper | 1 |
| 14***91 | Packing | 2 |
| 14***92 | Retainer | 2 |
270-2418 Operator Ar
| 12***66 | Switch As-Roller | 1 |
| 15***31 | Stopper | 2 |
| 15***46 | Bracket | 1 |
225-5729 Pedal Ar-Auxiliary
| 09***29 | Ring-Key | 1 |
| 16***66 | Seal | 1 |
| 16***36 | Glass; (Lh) | 1 |
250-6741 Platform Gp-Operator
| 15***49 | Block | 2 |
| 22***27 | Latch As | 1 |
| 22***28 | Frame As | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 23***74 | Bracket As | 1 |
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 29***40 | Motor As-Window Wiper; (Lower) | 1 |
245-7881 Screen Gp-Sun
| 24***81 | Screen Group-Sun | 1 |
| 26***30 | Film-Warning; (Crush Hazard, Read Omm, U.S.) | 1 |
| 26***31 | Film-Instruction; (Coupler Operation) | 1 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 25***06 | Film-Identification; (345c Lme) | 2 |
235-9020 Seat Belt Gp -Retractable, 3-In
| 18***53 | Film-Instruction; (Operator Controls) | 1 |
| 19***00 | Film-Warning; (Smartboom, Read Omm) | 1 |
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
229-9093 Seat Gp -High Back, With Heater
| 22***30 | Film-Warning; (Flying Debris, Stay Back, U.S.) | 1 |
| 22***31 | Film-Warning; (Flying Debris, Stay Back, Intl) | 1 |
| 22***93 | Seat Group; -High Back, With Heater | 1 |
242-3122 Seat & Mounting Gp -High Back, Tilt
| 18***52 | Film-Information; (Operator Controls) | 1 |
| 24***22 | Seat Group; -High Back, Tilt | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
229-9090 Seat Gp -High Back, Tilt
| 18***53 | Film-Instruction; (Operator Controls) | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
240-5065 Seat Gp-Suspension -Air Susp, High Back, With Htr
| 23***63 | Film-Identification; (Smartboom) | 1 |
| 24***65 | Seat Group-Suspension; -Air Susp, High Back, With Htr | 1 |
240-5064 Seat & Mounting Gp -Air Susp, High Back, With Htr
| 17***15 | Film-Instruction; (Hammer Control) | 1 |
| 24***64 | Spring; Replaces 421310a1, Spring, Seat Group-Suspension; -Air Susp, High Back, With Htr | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 26***17 | Film-Identification; (Quick Coupler) | 1 |
235-8856 Support Gp-Seat
| 10***46 | Film-Identification; (Cat) | 2 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 13***59 | Plate-Identification; (Engine Stop, Run) | 1 |
245-7892 Suspension Gp-Seat
| 24***92 | Suspension Group-Seat; -Mechanical | 1 |
240-5063 Suspension Gp-Seat -Air
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
229-9077 Suspension Gp-Seat
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
273-5384 Suspension Gp-Seat -Air
| 27***84 | Suspension Group-Seat; -Air | 1 |
229-9088 Washer Gp-Window -Lower
| 22***88 | Washer Group-Window; -Lower | 1 |
156-6647 Window Gp-Cab -Front, Lower
| 15***47 | Window Group-Cab; -Front, Lower | 1 |
227-5343 Window Gp-Cab -Front, Lower
| 22***43 | Window Group-Cab; -Front, Lower | 1 |
235-8915 Window Gp-Cab -Side, Rear
| 23***15 | Window Group-Cab; -Side, Rear | 1 |
139-7101 Window Gp-Cab -Front, Upper
| 13***01 | Window Group-Cab; -Front, Upper | 1 |
225-0326 Window Gp-Door
| 22***26 | Window Group-Door | 1 |
234-6594 Wiper Gp-Window -Front, Upper
| 23***94 | Wiper Group-Window; -Front, Upper | 1 |
244-2118 Wiper Gp-Window -Front, Lower
| 24***18 | Wiper Group-Window; -Front, Lower | 1 |
Power Train
227-6045 Drive Gp-Final -Without Motor
| 12***90 | Spacer; (40x100x30-mm Thk) | 6 |
| 12***78 | Bolt; (M36x4x603-mm) | 6 |
| 22***45 | Drive Group-Final; (Without Motor) | 1 |
227-6044 Final Drive Gp -With Motor
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 09***72 | Grommet | 1 |
227-6042 Power Train Ar
| 22***71 | Sheet As | 1 |
| 22***42 | Power Train Ar | 1 |
| 26***90 | Support As | 1 |
115-6399 Sprocket Gp
| 11***99 | Sprocket Group; (Non-Segmented) | 1 |
| 23***11 | Insulation | 1 |
| 23***12 | Insulation | 3 |
Service Equipment And Supplies
228-8265 Film Gp -Operator Controls
| 22***65 | Film Group; -Operator Controls | 1 |
193-6788 Film Gp
| 19***88 | Film Group; -Coupler Operation | 1 |
228-8267 Film Gp -Boom Float
| 22***67 | Film Group; -Boom Float | 1 |
268-6816 Film Gp -Quick Coupler
| 26***16 | Film Group; -Quick Coupler | 1 |
257-4596 Film Gp -Reversing Fan
| 25***96 | Film Group; -Reverse Air Fan | 1 |
228-8262 Film Gp -1-Pump/2-Pump, 1-Way, Foot Sw
| 22***62 | Film Group; -1-Pump/2-Pump, 1-Way, Foot Sw | 1 |
220-2532 Film Gp
| 22***32 | Film Group | 1 |
274-6685 Film Gp -Smartboom
| 27***85 | Film Group; -Smartboom | 1 |
306-7537 Plate & Film Gp
| 30***37 | Plate & Film Group | 1 |
Undercarriage
238-5648 Frame Ar-Undercarriage
| 20***83 | Link-Track; (Rh) | 52 |
| 20***84 | Link-Track; (Lh) | 52 |
| 22***29 | Bushing-Track | 51 |
248-1965 Guard Gp-Track Guide -Full Length
| 22***29 | Bushing-Track | 51 |
| 24***65 | Guard Group-Track Guide; -Full Length | 1 |
| 25***98 | Seal As; (Track) | 102 |
153-1588 Guard Gp-Track Guide -Center
| 15***88 | Guard Group-Track Guide; -Center | 1 |
| 22***29 | Bushing-Track | 51 |
| 25***98 | Seal As; (Track) | 102 |
167-9887 Guard Gp-Travel Motor
| 16***87 | Guard Group-Travel Motor | 1 |
| 22***29 | Bushing-Track | 51 |
| 25***98 | Seal As; (Track) | 102 |
248-7152 Idler Gp-Front
| 09***55 | Ring-Toric | 2 |
| 24***52 | Idler Group-Front | 1 |
| 30***06 | Roller & Bearing As, . Coupling | 1 |
248-7151 Idler Gp-Front
| 09***55 | Ring-Toric | 2 |
| 12***76 | Shaft As; (Roller) | 1 |
| 12***78 | Roller & Bearing As | 1 |
194-1207 Idler Gp-Front
| 12***80 | Roller Group-Track Carrier; (Track Carrier) | 4 |
| 17***93 | Roller Group-Track-Single Flange; (Track) (Single Flange) | 18 |
| 19***07 | Idler Group-Front | 1 |
301-2287 Link As-Track
| 15***70 | Step Group | 1 |
| 23***36 | Track Group; -2-Required | 1 |
| 30***87 | Link As-Track | 1 |
257-2510 Link As-Track
| 19***38 | Rod | 1 |
| 19***39 | Support | 1 |
| 19***53 | Spring | 1 |
301-2297 Link As-Track
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 208 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***69 | Shoe-Track | 52 |
252-0618 Link As-Track
| 12***82 | Bearing; (Track Roller) | 2 |
| 17***97 | Seal-O-Ring | 2 |
| 17***31 | Seal Group; (Duo-Cone) | 2 |
115-6397 Roller Ar-Track & Carrier
| 11***97 | Roller Ar-Track & Carrier | 1 |
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 208 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
300-4610 Roller Gp-Track Carrier
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 208 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***68 | Shoe-Track | 52 |
124-7280 Roller Gp-Track Carrier
| 12***80 | Roller Group-Track Carrier; (Track Carrier) | 1 |
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 208 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
178-7293 Roller Gp-Track-Single Flange
| 17***93 | Roller Group-Track-Single Flange; (Track) (Single Flange) | 1 |
| 24***65 | Track Group; -2-Required | 1 |
| 27***02 | Step Group | 1 |
194-1252 Spring Gp-Recoil
| 19***52 | Spring Group-Recoil; (Recoil) | 1 |
| 23***30 | Track Group; -2-Required | 1 |
| 27***02 | Step Group | 1 |
7y-1635 Adjustment Gp-Hydraulic Track
| 19***52 | Spring Group-Recoil; (Recoil) | 1 |
| 24***51 | Idler Group-Front | 1 |
| 7Y***35 | Track Adjuster & Recoil Group; (Lh) | 1 |
220-2508 Track Ar
| 22***08 | Track Ar | 1 |
| 23***31 | Track Group; -2-Required | 1 |
| 27***02 | Step Group | 1 |
275-5669 Track Gp -2-Required
| 27***02 | Step Group | 1 |
| 27***69 | Track Group; -2-Required | 1 |
| 28***07 | Track Group; -2-Required | 1 |
280-9007 Track Gp -2-Required
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***68 | Shoe-Track | 52 |
| 28***07 | Track Group; -2-Required | 1 |
280-9005 Track Gp -2-Required
| 15***70 | Step Group | 1 |
| 28***05 | Track Group; -2-Required | 1 |
| 28***06 | Track Group; -2-Required | 1 |
280-9006 Track Gp -2-Required
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***66 | Shoe; (Track) | 52 |
| 28***06 | Track Group; -2-Required | 1 |
275-5672 Track Gp -2-Required
| 27***02 | Step Group | 1 |
| 27***72 | Track Group; -2-Required | 1 |
| 28***05 | Track Group; -2-Required | 1 |
234-7530 Track Gp -2-Required
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 208 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***66 | Shoe; (Track) | 52 |
311-1926 Track Gp -2-Required, Heavy-Duty
| 31***26 | Track Group; -2-Required, Heavy-Duty | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
311-6452 Track Gp -2-Required
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 31***52 | Track Group; -2-Required | 1 |
| 4I***67 | Cap | 1 |
311-6458 Track Gp -2-Required
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 31***58 | Track Group; -2-Required, Heavy-Duty | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
281-4727 Track Gp -2-Required
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***66 | Shoe; (Track) | 52 |
| 28***27 | Track Group; -2-Required | 1 |
281-4729 Track Gp -2-Required
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***69 | Shoe-Track | 52 |
| 28***29 | Track Group; -2-Required | 1 |
281-4728 Track Gp -2 Required
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***68 | Shoe-Track | 52 |
| 28***28 | Track Group; -2 Required | 1 |
275-5671 Track Gp -2-Required
| 27***02 | Step Group | 1 |
| 27***71 | Track Group; -2-Required | 1 |
| 28***08 | Track Group; -2-Required | 1 |
311-8145 Track Gp -2-Required
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 31***45 | Track Group; -2-Required | 1 |
297-5591 Track Gp -2 Required
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***67 | Shoe-Track | 52 |
| 29***91 | Track Group; -2 Required | 1 |
234-7531 Track Gp -2-Required
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 208 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***67 | Shoe-Track | 52 |
247-4665 Track Gp -2-Required
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 208 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***69 | Shoe-Track | 52 |
311-8148 Track Gp -2-Required
| 31***48 | Track Group; -2-Required | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
239-8036 Track Gp -2-Required
| 15***41 | Bolt; (Track) (M24x1.5x67mm) | 208 |
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***68 | Shoe-Track | 52 |
311-8147 Track Gp -2-Required
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 31***47 | Track Group; -2-Required | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
311-6454 Track Gp -2-Required
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
280-9008 Track Gp -2-Required
| 15***42 | Nut-Track; (M24x1.5-Thd) | 208 |
| 15***69 | Shoe-Track | 52 |
| 28***08 | Track Group; -2-Required | 1 |
Work Tools
260-1111 Bucket Gp-Rock -Ub-Family
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 24***12 | Housing Group-Air Conditioner; -Inlet Air | 1 |
260-1112 Bucket Gp-Rock -Ub-Family
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***51 | Support As | 1 |
302-5148 Coupler Ar-Quick
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 13 |
| 12***36 | Screw; (Truss Head) (M6x1.0x16mm) | 1 |
| 15***73 | Cover | 1 |
311-3969 Coupler Ar-Quick -Dedicated Wedge Lock
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 13 |
| 12***36 | Screw; (Truss Head) (M6x1.0x16mm) | 1 |
| 15***73 | Cover | 1 |
246-8114 Coupler Ar-Quick
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
246-8115 Coupler Gp-Quick
| 08***52 | Washer | 2 |
| 09***55 | Screw-Machine; (M4x0.07x12-mm) | 2 |
| 09***23 | Screw-Machine; (M6x1x6-mm) | 3 |
169-0761 Lock Gp-Quick Coupler -Hydraulic
| 13***99 | Hatch Group; (Roof) | 1 |
| 13***01 | Window Group-Cab; -Front, Upper | 1 |
| 16***72 | Lighting Group-Flood; -Cab | 1 |
246-8124 Pin Gp-Coupler
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
| 12***38 | Seal-O-Ring (Id=6.7mm); (Id=6.70mm) | 1 |
| 24***37 | Valve As-Expansion | 1 |
280-0351 Ripper Gp
| 13***00 | Clip; (Tab) | 1 |
| 25***92 | Bolt; (M8x1.25x80-mm) | 2 |
| 28***51 | Ripper Group | 1 |
235-5634 Yoke Gp-Lifting
| 23***34 | Yoke Group-Lifting | 1 |
| 24***87 | Condenser Group-Refrigerant | 1 |
| 24***19 | Cover As | 1 |
345C L serial number reference
The PIN plate is a stamped metal plate riveted to the machine frame, on the right-hand side below the cab window; a duplicate stamp is usually also present on the frame structure elsewhere on the machine. The full PIN runs 17 characters; the serial number prefix is the first three letters of the trailing 8-character serial block, and the five digits that follow are the sequential build number within that prefix (e.g., TDG00001 is the first unit built under the TDG code).
| Prefix | Identifies | Notes |
|---|---|---|
| PJW | 345C L | Long/variable-gauge undercarriage configuration. C13 ACERT engine, 257 kW (345 hp) net flywheel rating. Listed alongside the ESD and TDG prefix blocks in the same parts catalog for this model. |
| TDG | 345C L | Long/variable-gauge undercarriage configuration. C13 ACERT engine, 257 kW (345 hp) net flywheel rating. |
| ESD | 345C L | Long/variable-gauge undercarriage configuration. C13 ACERT engine, 257 kW (345 hp) net flywheel rating. Some catalog listings cover this block jointly under 345C and 345C L, so double-check undercarriage code against the machine's own PIN plate. |
| WDE | 345C L | Long/variable-gauge undercarriage configuration. C13 ACERT engine, 257 kW (345 hp) net flywheel rating. |
| TAJ | 345C L | Long/variable-gauge undercarriage configuration. C13 ACERT engine. Grouped with the ESD/TDG/PJW blocks in combined documentation sets for this excavator; confirm with dealer for exact build window. |
| LYS | 345C L | Long/variable-gauge undercarriage configuration. C13 ACERT engine. Single-source tie; confirm with dealer. |
| ELS | 345C L | Long/variable-gauge undercarriage configuration. C13 ACERT engine. Catalog listing covers this block jointly under 345C and 345C L; confirm undercarriage code against the PIN plate with dealer. |
| GPH | 345C L | Long/variable-gauge undercarriage configuration. C13 ACERT engine. Limited independent corroboration for this exact prefix; confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar 345C L use?
A Cat C13 ACERT six-cylinder diesel with ADEM A4 electronic controls, rated at 257 kW (345 hp) net flywheel power (some spec-sheet editions instead show 239 kW/321 hp — confirm against the engine plate). It replaced the 3176C engine used in the earlier 345B Series II.
What is the operating weight of the Caterpillar 345C L?
About 44,970 kg (99,150 lb) in reference configuration (6.9 m boom, 3.9 m stick, general-purpose bucket). Depending on undercarriage gauge, boom/stick length, and track shoe width, operating weight ranges roughly from 44,000 to 49,800 kg (97,000 to 109,800 lb).
What replaced the Caterpillar 345C L?
The Cat 345D L, introduced around 2008 with the D-series update. The 345C L itself succeeded the 345B Series II.
What 345C L owners discuss
What's the reputation of the C13 ACERT engine and ADEM A4 controls on the 345C L?
The 345C L runs the same Cat C13 ACERT engine and ADEM A4 electronic control as the base 345C, with more displacement and a lower running speed than the prior 3176C for better fuel economy. Most complaints trace to the fuel and air side rather than the block itself: leaking injectors show up as white smoke and soft power, and a turbo with worn shaft bearings drops boost and adds smoke under load on higher-hour machines. Momentary RPM sag or stalling while turning has also been reported, and techs generally find it in fuel delivery (filters, injectors) before looking at the ECM. Start a smoke or power complaint with fuel filters and an injector cutout test before condemning the turbo or the ECM.
What hydraulic behavior shows up in the boom/stick circuit, and is it something to worry about?
Slow or uneven stick movement, especially one side of the joystick sweep working fine while the other lags, points techs first at pilot oil supply to the second stick spool rather than the main pump. A restricted pressure-reducing valve or a plugged pilot passage can starve pump 2 while pump 1 reads normal, mimicking a weak pump. Separately, early-production 345C L machines (serial prefix FPC) had a stick regeneration valve with a machining tolerance problem that could seize during stick travel and add to drift, along with a pilot valve group setscrew on the boom/stick pilot circuit that could back out of its spool and cause excess cylinder drift or a slower boom-down/stick-in speed. Cat's fix for both is a revised valve with tighter tolerances. Because either fault lets a loaded boom or stick creep down on its own, have your dealer verify serial coverage and check for cylinder drift before working near people or under a suspended load.
What's the undercarriage wear pattern, and what does the 'L' in 345C L actually mean?
The L denotes the long-carriage undercarriage: an added bottom roller and a longer track frame compared with a standard-length chassis, spreading weight over more ground contact. Track links ship sealed and lubricated from the factory to slow bushing wear and cut travel noise, and a bolt-on idler guard and center guard are standard to keep the chain tracking straight on slopes or rough ground. In the field, owners report undercarriage components (rollers, idlers, sprockets, chain) nearing replacement around the 12,000-hour mark in demanding applications, sometimes sooner. Ground conditions and which undercarriage option was ordered move that number significantly, so treat any single hour figure as a rough guide, not a guarantee.
What electrical or control-system faults come up on this model?
The color monitor introduced on this series displays engine, hydraulic, and diagnostic/prognostic data directly, which helps narrow a fault before pulling anything apart. Owners have reported an ENGINE ECM ERROR screen tied to a programmed-parameter fault; a reflash clears most cases, though some machines needed the ECM replaced when the fault kept returning. Separately, a swing brake that releases when it shouldn't, while traveling or digging rather than only on a swing command, has shown up on this model. Causes found in the field range from a bad brake solenoid or a stuck relief valve to mechanical parts out of place inside the swing drive itself, such as a skewed valve plate or a displaced friction plate or sun-gear spacer. An uncommanded swing brake release lets the house creep or swing without a command input. Have your dealer verify the brake solenoid, relief valve, and swing drive assembly before the machine goes back to work.
How does the travel system and final drive hold up over time?
The 345C L uses two-speed axial-piston travel motors that shift automatically between a high and low range based on drawbar-pull demand rather than a simple manual creep switch. When one track crawls or won't move on its own but the machine tracks fine with both sides engaged, mechanics generally check the center swivel (rotary manifold) before condemning the travel motor. A worn swivel seal bypasses pressure internally and mimics a weak motor. On the final drive itself, the most common wear point across this class of excavator is the floating seal between the sprocket and the motor housing. A slow oil weep at the sprocket face is usually the first sign, well before the motor itself loses power.
What should a buyer check before purchasing a used 345C L?
Walk the frame and counterweight for cracks, repaired dents, or fresh weld, and watch the house for play at the swing bearing while someone works the stick against resistance. Raise one side on the bucket, run that track, and inspect rollers, idlers, sprockets, and chain for stretch or flat spots, matching wear against the hour meter since a light undercarriage on a high-hour machine can flag a rolled-back meter. Fully extend the boom and stick cylinders under load and watch for drift; on early-production machines this can point to the known pilot valve and stick regeneration valve issue rather than simple seal wear. Pull the monitor's fault code history, check hydraulic oil for a milky look or burnt smell, and watch startup and load exhaust color: blue for oil burning, black for a fuel or air intake problem. Have your dealer verify any cylinder drift, swing bearing play, or open ECM fault codes with a full inspection before agreeing on a price.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 345C L. Related factory variants of the same model family:
345C L
Need a specific 345C L part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.