Caterpillarexcavator
Caterpillar 328D LCR
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 328D LCR is a 28-30 tonne class long/compact-radius (LCR) crawler excavator on Caterpillar's D-series medium excavator platform, produced roughly 2007 to 2015. It runs a Cat C7 ACERT diesel with ADEM A4 electronic control, rated 152 kW (204 hp) net flywheel power, with no diesel particulate filter. The base open-site "Reach" configuration operates at approximately 34.7 tonnes (76,500 lb); a separate Zeppelin-built tunneling-excavator configuration with a twin-tilt boom and a mechanical quick coupler runs heavier, up to roughly 39.8 tonnes (87,850 lb), on a lower engine tune suited to enclosed-site work. The LCR shares its undercarriage lineage with Caterpillar's larger 330D/336D L platform for stability, mated to a boom moved toward the machine centerline off 325D-class geometry, giving a reduced tail swing radius of about 1900 mm (6 ft 3 in) and minimal counterweight overhang. Recognized serial prefixes for this family include BYH, GTN, MKR, RMX, and SWF.
Across its production run the 328D LCR kept the same C7 ACERT and ADEM A4 core but was offered in region-specific emissions tunes (Tier 3 and Tier 4 Interim compliant variants) and in the distinct tunneling-boom build alongside the standard open-pit reach configuration — treat these as configurations of one catalogued model, not separate machines, when reading OMM and parts data. No single D-series or E-series model directly replaced the LCR nameplate; Caterpillar folded the reduced-tail-swing niche into later reduced-radius configurations of its 329/336-class excavators rather than continuing a standalone LCR line. That makes surviving 328D LCR units a specialist holdover in the used market, valued specifically for piling, demolition, and tunnel work where the short tail swing and 330D/336D-grade undercarriage still outperform newer standard-swing machines, keeping demand steady for both running units and their undercarriage, swing, and attachment-circuit parts.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 328D LCR specifications
Engine
| Engine model | Cat C7 ACERT, six-cylinder diesel |
| Net power - standard excavator configuration | 152 kW (204 hp) net flywheel power per ISO 9249 and EEC 80/1269; 151 kW (202 hp) per SAE J1349 |
| Net power - tunneling excavator configuration | 140 kW (190 hp) at 1800 rpm per ISO 9249 and EEC 80/1269 - lower-rated tune used on the tunneling-boom configuration; varies from the open-pit rating above |
| Displacement, bore, stroke | 7.2 L (440 in3) displacement; 110 mm (4.3 in) bore x 127 mm (5 in) stroke |
| Emissions | Meets U.S. EPA Tier 3 and EU Stage IIIA emissions requirements; no power derate required up to 2300 m (7,500 ft) altitude |
Weights
| Operating weight - Reach boom, R3.2CB2 (10'6") stick, 1.2 m3 bucket, 850 mm shoes | 34 700 kg (76,500 lb) |
| Base machine with counterweight, no front linkage, 850 mm shoes | 29 700 kg (65,477 lb) |
| Standard counterweight | 7 720 kg (17,020 lb) |
| Operating weight - tunneling config, 3200 mm boom / 4000 mm stick, 600 mm shoes, dozer blade | 37 970 kg |
| Operating weight - tunneling config, 3200 mm boom / 2500 mm stick | 37 740 kg |
| Operating weight - tunneling config, bottom dump bucket | 37 440 kg |
| Operating weight - tunneling config, standard tunneling boom (45 degree tilt) with 4650 mm stick | 42 540 kg |
| Operating weight - tunneling config, short tunneling boom | 43 460 kg (approx. 43.5 t) |
| Configuration note | Operating weight varies by configuration: the open-pit Reach boom setup runs about 34.7 t (76,500 lb) with the R3.2CB2 stick, 1.2 m3 bucket, and 850 mm shoes, while tunneling-boom configurations with dozer blade and reinforced structure run 37.7-43.5 t. |
Dimensions
| Boom and stick options - excavator configuration | Reach boom 6.15 m (20'2"); stick options R3.2CB2 3.2 m (10'6") or R2.65CB2 2.65 m (8'8") |
| Transport (shipping) length | 9820 mm (32'3") with R3.2CB2 stick; 9830 mm (32'3") with R2.65CB2 stick |
| Transport (shipping) height | 3370 mm (11'1") with R3.2CB2 stick; 3400 mm (11'2") with R2.65CB2 stick |
| Transport width | 3440 mm (11'3") with 850 mm (34") shoes; 3290 mm (10'10") with 700 mm (28") shoes; 3190 mm (10'6") with 600 mm (24") shoes |
| Tail swing radius | 1900 mm (6'3") - reduced from 3080 mm on the prior-generation long-undercarriage 329D L platform |
| Track shoe width options | 600 mm (24"), 700 mm (28"), or 850 mm (34") double or triple grouser |
| Ground clearance | 510 mm (1'8") |
| Track gauge | 2590 mm (8'6") |
| Track length on ground / length to center of idler and sprocket | Track length approx. 5020 mm (16'6"); length to center of idler and sprocket 4040 mm (13'3") |
| Undercarriage | Long (L) undercarriage - two additional track links versus the standard undercarriage, for maximum stability and lift capacity; shares its lineage with the 330D L / 336D L platform. |
| Cab height | 3190 mm (10'0") |
| Counterweight clearance | 1200 mm (3'11") |
| Dimensions - tunneling config, standard tunneling boom | Transport height 3943 mm; transport length 12 265 mm; transport width 3190 mm with 600 mm shoes; tail swing radius unchanged at 1900 mm |
| Dimensions - tunneling config, short tunneling boom | Transport height 3794 mm; transport length 11 530 mm; transport width 3190 mm with 600 mm shoes |
Performance
| Max digging depth | 6920 mm (22'8") with R3.2CB2 stick; 6370 mm (20'11") with R2.65CB2 stick |
| Max reach at ground level | 10 560 mm (34'8") with R3.2CB2 stick; 10 080 mm (33'1") with R2.65CB2 stick |
| Max reach | 10 770 mm (35'4") with R3.2CB2 stick; 10 310 mm (33'10") with R2.65CB2 stick |
| Max cutting height | 11 110 mm (36'5") with R3.2CB2 stick; 10 910 mm (35'10") with R2.65CB2 stick |
| Max loading (dump) height | 8040 mm (26'5") with R3.2CB2 stick; 7820 mm (25'8") with R2.65CB2 stick |
| Max vertical wall digging depth | 6260 mm (20'6") with R3.2CB2 stick; 5730 mm (18'10") with R2.65CB2 stick |
| Swing speed | 10.2 rpm |
| Swing torque | 82.2 kN*m (60,628 lb ft) |
| Max travel speed | 4.2 km/h (2.6 mph) |
| Max drawbar pull | 300 kN (67,443 lb) |
| Main hydraulic system flow and pressure | Main implement pumps combine for 2 x 235 L/min (62 gal/min) max flow; max system pressure 35 000 kPa (5,076 psi), 36 000 kPa (5,221 psi) in heavy-lift mode; travel pressure 35 000 kPa (5,076 psi); swing pressure 27 500 kPa (3,989 psi) |
| Performance - tunneling config, standard tunneling boom | Max digging depth 5146 mm; max reach at ground level 9729 mm; max reach 9969 mm; max cutting height 11 481 mm |
| Performance - tunneling config, short tunneling boom | Max digging depth 3382 mm; max reach at ground level 8993 mm; max reach 9253 mm; max cutting height 9865 mm |
Forces
| Bucket digging force (ISO), excavator configuration | 179-201 kN (40,241-45,187 lb) depending on bucket family and stick length - Power Buckets rate highest at 200-201 kN, HD/HDR Buckets rate 179-180 kN; drops to 155-162 kN (34,845-36,419 lb) when fitted with a quick coupler |
| Stick digging force (ISO), excavator configuration | 130-152 kN (29,225-34,171 lb) depending on stick length - the shorter R2.65CB2 stick gives higher force than the longer R3.2CB2 stick; drops to 123-142 kN (27,651-31,923 lb) with a quick coupler |
| Bucket digging force (SAE), excavator configuration | 159-176 kN (35,745-39,566 lb) depending on bucket family and stick |
| Stick digging force (SAE), excavator configuration | 124-147 kN (27,876-33,047 lb) depending on stick length |
| Forces - tunneling boom configuration | Max bucket digging force 212 kN; max stick digging force 134 kN - published for the tunneling-boom setup and not directly comparable to the open-pit Reach boom ratings above |
Service capacities (summary)
| Fuel tank | 406 L (106 gal) |
| Hydraulic system, including tank | 290 L (76.6 gal) |
| Hydraulic tank | 153 L (40.4 gal) |
| Engine oil | 32 L (8.5 gal) |
| Cooling system | 32 L (8.5 gal) |
| Swing drive | 10 L (2.6 gal) |
| Final drive, each | 8 L (2.1 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
328D LCR fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 32 L (8.5 US gal) | Cat DEO-ULS (API CJ-4) is preferred; Cat DEO (API CI-4/CI-4 Plus) is an acceptable second choice. SAE 10W-30 is the preferred grade for the C7 ACERT engine across -18C to 40C (0F to 104F). Use SAE 15W-40 for sustained warm climates (-10C to 50C / 5F to 122F), Cat DEO-ULS SYN SAE 5W-40 for wide-range cold service, or Cat DEO Cold Weather SAE 0W-40 down to -40C (-40F). |
| Cooling system | 32 L (8.5 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 concentration, is preferred; add ELC Extender at coolant mid-service life. Cat DEAC (conventional heavy-duty antifreeze/coolant) is an acceptable second choice and needs periodic SCA maintenance. |
| Fuel tank | 406 L (106 US gal) | Ultra low sulfur diesel per the engine fuel specification. Fuel sulfur level affects the engine oil choice between Cat DEO and Cat DEO-ULS and the oil drain interval. |
| Hydraulic system total (incl. tank) | 290 L (76.6 US gal) | Cat HYDO Advanced 10 (SAE 10W) is the standard factory fill on standard-configuration machines, rated -20C to 40C (-4F to 104F). Cat HYDO Advanced 20 (SAE 20W) covers -5C to 45C (23F to 113F); Cat HYDO Advanced 30 (SAE 30) covers 0C to 50C (32F to 122F). Cat TDTO is an acceptable alternate. Cat Bio HYDO Advanced (ISO 46 multigrade, -30C to 45C / -22F to 113F) is the factory fill on configurations that require biodegradable hydraulic fluid. |
| Hydraulic tank | 153 L (40.4 US gal) | Same fluid family as the hydraulic system total: Cat HYDO Advanced by climate grade, or Cat Bio HYDO Advanced where biodegradable fluid is specified. |
| Final drive (each) | 8 L (2.1 US gal) | Cat TDTO (Transmission/Drive Train Oil) or Cat TDTO-TMS. Grade by ambient temperature: SAE 10W (-20C to 40C / -4F to 104F), SAE 20W (-5C to 45C / 23F to 113F), SAE 30 (0C to 50C / 32F to 122F), or Cat TDTO Cold Weather SAE 0W-20 down to -40C (-40F). |
| Swing drive | 10 L (2.6 US gal) | Same Cat TDTO fluid family and viscosity grades as the final drives. |
| Grease (pin joints, swing gear) | spec only, no fill quantity documented | Cat Extreme Application Grease (NLGI 2, Calcium Sulfonate Complex base, 5 percent moly, tackified) is standard for pin/bucket-linkage joints and swing gear teeth. Cat Extreme Application Grease-Arctic (NLGI 0.5, semi-synthetic) covers cold climates to -50C (-58F); Cat Extreme Application Grease-Desert (NLGI 2) covers hot climates. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 328D LCR maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 328D LCR beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil sampling on the C7 ACERT engine, hydraulic system, and travel/swing drives every 250 hours — the ADEM A4 controller logs fault codes worth pulling with Cat ET at each visit. LCR machines on demolition and piling duty load the hammer/shear auxiliary circuit hard, so watch hydraulic oil cleanliness and case-drain filter life closely. Test coolant for ELC additive depletion rather than just topping it off, since the C7 has no DPF to mask early cooling-system stress.
Corrective & Common Repairs
Expect accelerated track link, bushing, and sprocket wear on the 330D/336D-derived LCR undercarriage from piling and demolition ground contact — budget for more frequent adjustment than a standard-swing 329D. Swing bearing and gearbox wear shows up early on machines cycled tight-radius all day. Hydraulic cylinder rod seals on the tilt/tunnel-boom linkage leak first under high-cycle attachment work. C7 ACERT turbo and injector faults are the most common engine-side calls; pull ADEM A4 codes before swapping parts.
Overhaul & Rebuild Points
Full undercarriage rebuild — chain, rollers, idlers, sprockets — is the single biggest overhaul cost on an LCR working piling or demolition sites, and wear limits should be checked against the 330D/336D reference, not a standard 329D. Main hydraulic pump, travel motors, and swing gearbox are the next wear points from continuous high-pressure attachment cycling. On the Zeppelin tunneling configuration, inspect and rebuild the twin-tilt boom cylinders and linkage bushings; the lower-tuned engine sees less top-end wear but the tool circuit sees more.
Seasonal & Environment Servicing
Tunnel-configured 328D LCR units run in enclosed, low-ventilation sites — check exhaust backpressure and cooling-package airflow more often since heat can't dissipate like on open-pit work. Demolition dust loads air filters and radiator/hydraulic cooler fins fast; service on condition, not just the calendar. Piling sites bring standing water and mud that attack undercarriage seals and swing-bearing seals — grease and inspect more frequently. Cold-start the C7 ACERT with the correct block heater/starting-aid procedure; it has no DPF regen cycle to manage in low temperatures.
328D LCR common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 132-7165 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2503 | Filter Element As-Air | Air intake service | Check fitment → |
| 093-7521 | Filter-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
328D LCR fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine oil pressure reads below the normal operating range at the most severe level; triggers a shutdown-level warning on the C7 ACERT engine. | Low oil level, worn oil pump, plugged filter, or a failed oil pressure sensor/wiring circuit. | Check oil level and filter condition first, then verify sensor wiring and connector before condemning the pump. |
| 110-00 | Engine coolant temperature reads above the normal operating range at the most severe level; indicates overheating. | Low coolant, blocked radiator core or fan drive fault, failed water pump, stuck thermostat, or a faulty temperature sensor. | Check coolant level and inspect the radiator for debris or blockage, and confirm the fan is turning before going deeper into the cooling circuit. |
| 111-01 | Engine coolant level reads below the normal operating range at the most severe level; low coolant level shutdown condition. | External or internal coolant leak, coolant not topped off after service, or a failed level sensor/probe circuit. | Inspect for visible leaks, top off coolant to spec, then verify the level sensor before replacing it. |
| 102-04 | Boost pressure sensor circuit voltage reads below normal, pointing to an open or grounded signal circuit. | Damaged sensor wiring or connector, corrosion at the harness, or a failed boost pressure sensor. | Inspect the sensor connector and harness for damage or corrosion, then check sensor supply voltage before replacing the sensor. |
| 168-01 | Electrical system voltage reads below the normal operating range; low system/battery voltage. | Weak or failing batteries, loose or corroded battery cables, or a faulty alternator/voltage regulator. | Load-test the batteries and check charging system output before replacing any electrical components. |
| 164-03 | Injection actuation pressure sensor circuit voltage reads above normal on the HEUI-type fuel system. | Damaged injection actuation pressure sensor wiring or connector, a failed sensor, or an actuation pressure control valve fault. | Check the sensor wiring and connector, and verify actuation oil level and condition before replacing the sensor. |
| 1143-05 | Swing solenoid valve circuit current reads below normal, consistent with an open circuit or failed coil. | Damaged wiring or connector at the swing solenoid, or a failed solenoid coil; owners of this machine commonly report swing solenoid faults tied to loss-of-swing complaints. | Inspect the solenoid wiring and connector, then measure coil resistance before replacing the valve. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
328D LCR attachments & work tools
Buckets
Cat catalogs GD, HD, SD and XD duty buckets for the 328D LCR spanning roughly 0.5-2.0 m3 (0.7-2.6 yd3), with the factory reference HD bucket at 1.2 m3 (1.6 yd3) and about 1.25 m (49 in) wide. Buckets use the CB2 linkage family shared with the 329D/330D range, and specialty styles (ditch-cleaning, tilt, center-lock pin-grabber, power, wide-tip) are also offered. Both pin-on and quick-coupler mounting are supported; exact capacity depends on stick length and shoe/counterweight configuration.
Hydraulic hammers
Cat hammer literature lists the 328D LCR's carrier class (319-329 excavators) as a match for the H130Es breaker, with the H120Es also spanning this class. Typical breaker operating weight for this size class runs roughly 1.4-1.8 tonne (Cat H120/H130 Performance or GC series, minimum operating weight around 1.5 tonne for the H120 S); exact model is dealer-matched to the machine's hydraulic flow and pressure.
Quick couplers
Cat lists the 328D LCR among excavators fitted with its Pin Grabber coupler line, sharing the CB-linkage coupler family (around 90 mm/3.5 in rear pin) used across the 326-335 range. Both standard Pin Grabber and Pin Grabber Plus (hands-free, multi-tool) couplers are offered for this class.
Thumbs/grapples
The auxiliary valve is standard on the 328D LCR and supports single- or double-function tools such as hydraulic thumbs and non-rotating grapples. Adding the medium-pressure circuit with third pump enables rotating tools such as grapples, shears, and multi-processors, with several pre-programmed tool settings selectable from the cab monitor.
Rippers
No factory single-shank ripper package is documented specifically for the 328D LCR. Cat's single-shank ripper line is sized by carrier weight class across the 20-30 tonne excavator range generally, so a ripper for this machine would be a dealer-fitted attachment rather than a listed standard option; an XD-duty bucket or bucket-mounted ripper tooth is the more commonly documented approach for this model.
Hydraulic kit notes
Auxiliary hydraulics come standard on the 328D LCR, offered either as a stand-alone single/double-function circuit or upgraded with a medium-pressure circuit and third pump for tools that need rotation. This covers hammers, shears, grapples, pulverizers, multi-processors, and vibratory plate compactors without changing the base machine.
All 328D LCR assemblies by section
Every catalogued assembly group for the Caterpillar 328D LCR. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
264-8543 Air Cleaner Ar
| 26***43 | Air Cleaner Ar | 1 |
| 26***91 | Air Cleaner Group | 1 |
| 26***18 | Support Group-Precleaner | 1 |
183-8086 Air Cleaner Gp
| 18***86 | Air Cleaner Group | 1 |
| 18***87 | Air Cleaner Group | 1 |
| 19***91 | Hood | 1 |
310-9669 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
266-6291 Air Cleaner Gp
| 11***59 | Damper | 1 |
| 13***80 | Precleaner As; (Air) | 1 |
| 13***85 | Air Cleaner Group | 1 |
310-9677 Air Cleaner Gp
| 13***65 | Filter Element As-Air; (Primary)(Ultra High Efficiency) | 1 |
| 25***66 | Indicator As-Air Filter Change; (Air Restriction) | 1 |
| 31***77 | Air Cleaner Group | 1 |
134-7085 Air Cleaner Gp
| 13***85 | Air Cleaner Group | 1 |
| 25***66 | Indicator As-Air Filter Change; (Air Restriction) | 1 |
| 4P***24 | Seal-O-Ring | 1 |
183-8087 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
288-0973 Cover Gp-Air Inlet
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
189-8780 Cover Gp-Air Inlet -Starting Aid Heater
| 18***80 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
294-7675 Cover Gp-Air Inlet
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
231-3950 Elbow Gp-Air Inlet
| 11***63 | Elbow | 1 |
| 13***26 | Stud; (M8x1.25x110-mm, M8x1.25x17-mm) | 1 |
| 14***95 | Plug As | 1 |
332-3182 Elbow Gp-Air Inlet
| 11***63 | Elbow | 1 |
| 13***26 | Stud; (M8x1.25x110-mm, M8x1.25x17-mm) | 1 |
| 14***95 | Plug As | 1 |
266-6286 Lines Gp-Air
| 19***91 | Elbow | 1 |
| 26***86 | Lines Group-Air | 1 |
| 27***56 | Hose | 1 |
245-9367 Lines Gp-Air
| 14***67 | Clamp; (Hose) | 14 |
| 24***67 | Lines Group-Air | 1 |
| 26***26 | Hose | 1 |
272-4626 Lines Gp-Muffler Drain
| 17***73 | Clip | 1 |
| 17***26 | Support As | 1 |
| 27***25 | Tube As | 1 |
219-5840 Manifold Gp-Exhaust
| 21***64 | Manifold-Exhaust; (End) | 2 |
| 21***40 | Manifold Group-Exhaust | 1 |
| 21***55 | Manifold-Exhaust; (Center) | 1 |
266-6328 Muffler Gp
| 18***92 | Support As | 1 |
| 1W***31 | Clamp-Band; -Turbo Exhaust-Exhaust | 1 |
| 23***54 | Muffler As | 1 |
254-3808 Turbocharger Gp
| 25***96 | Turbocharger Group | 1 |
| 25***08 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
177-0438 Turbocharger Gp
| 17***38 | Turbocharger Group | 1 |
| 17***40 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
250-7696 Turbocharger Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
177-0440 Turbocharger Gp
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
| 17***40 | Turbocharger Group | 1 |
Basic Engine
253-0433 Belt Tensioner Gp
| 19***43 | Belt Tensioner | 1 |
| 25***33 | Belt Tensioner Group | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
253-0437 Bracket Gp-Engine
| 17***73 | Drive Group-Fan | 1 |
| 18***51 | Support-Compressor | 1 |
| 25***37 | Bracket Group-Engine; -Front | 1 |
212-4289 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 21***88 | Camshaft As | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
257-9145 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 3 |
| 17***67 | Spacer; (8.8x16x10-mm Thk)(Marked X) | 8 |
| 1U***46 | Sealant (For Locations A) | 0 |
172-8732 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 17***32 | Cover Group-Front Housing | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
211-9120 Cover Gp-Front Housing
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 16***76 | Cover As-Front | 1 |
118-1727 Cover Gp-Front Housing
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 4W***26 | Cover | 1 |
252-2328 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 16***26 | Seal-O-Ring | 1 |
210-5590 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
305-8141 Cylinder Block Gp
| 10***04 | Sleeve-Cylinder | 0 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 26***74 | Cylinder Block Group | 1 |
263-3774 Cylinder Block Gp
| 26***74 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
221-4482 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 22***82 | Cylinder Block Group | 1 |
| 30***41 | Cylinder Block Group | 1 |
219-5844 Cylinder Head As
| 14***18 | Insert-Valve Seat; (Exhaust, Standard) | 6 |
| 21***13 | Insert-Valve Seat; (Standard, Inlet) | 12 |
| 21***44 | Cylinder Head As | 1 |
314-4184 Cylinder Head As
| 22***00 | Sleeve-Injector | 6 |
| 23***85 | Insert-Valve Seat; (Standard)(Exhaust) | 6 |
| 26***57 | Insert-Valve Seat; (Standard)(Inlet) | 12 |
219-5849 Cylinder Head Gp
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 1 |
| 14***89 | Fastener Group-Cylinder Head | 14 |
219-5846 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
300-9550 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
219-5847 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 21***47 | Cylinder Head Group | 1 |
263-1850 Damper & Pulley Gp
| 11***32 | Spacer-Special | 1 |
| 16***21 | Damper Assem. | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
210-8176 Drive Gp-Fan
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 21***76 | Drive Group-Fan | 1 |
177-6973 Drive Gp-Fan
| 17***73 | Drive Group-Fan | 1 |
| 18***54 | Bracket As | 1 |
| 4W***03 | Cup-Roller Bearing | 2 |
258-8723 Fastener Gp-Cylinder Head
| 22***44 | Clip | 3 |
| 24***00 | Spring | 11 |
| 25***23 | Fastener Group-Cylinder Head; -Valve Cover Base | 1 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
252-9551 Fastener Gp-Front Cover
| 25***51 | Fastener Group-Front Housing | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
113-6170 Fastener Gp-Lifting
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 3 |
186-5892 Flywheel Gp
| 18***92 | Flywheel Group | 1 |
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
7w-8813 Housing Gp-Flywheel
| 2P***94 | Plug-Sealing | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
| 7C***33 | Housing-Flywheel | 1 |
245-3260 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
| 24***60 | Housing Group-Front | 1 |
139-4081 Lifter Gp-Valve
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
142-8100 Lifting Gp-Engine
| 14***00 | Lifting Group-Engine; (Engine) | 1 |
| 15***96 | Plate-Lifting; (Rear) | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
266-6287 Mounting Gp-Engine
| 09***59 | Bolt; (M14x2x60-mm) | 6 |
| 09***88 | Bolt; (M14x2x30-mm) | 2 |
| 10***29 | Washer; (21.5x120x8-mm Thk) | 4 |
176-9429 Pan Gp-Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***03 | Plug As-Connector; (2-Pin) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
212-3652 Piston & Rod Gp
| 19***21 | Bolt; (Connecting Rod) | 2 |
| 19***53 | Ring-Piston; (Intermediate) | 1 |
| 19***71 | Pin-Piston | 1 |
159-0303 Plug Gp-Cylinder Block
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6F***62 | Washer,Flat Transmission Oil Cooler | 1 |
162-8068 Plug Gp-Engine
| 14***95 | Plug As | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
263-1847 Pulley Gp
| 26***25 | Pulley-Fan | 1 |
| 26***30 | Belt-Serpentine | 1 |
| 26***47 | Pulley Group | 1 |
256-3831 Rocker Arm Gp
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3834 Rocker Arm Gp
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 4R***99 | Excluder-Crankshaft Seal | 1 |
232-3717 Valve Mechanism Gp
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***09 | Bridge-Valve | 6 |
| 23***54 | Clip | 1 |
235-5528 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
256-3830 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
Cooling System
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
192-9972 Housing & Regulator Gp
| 12***66 | Gasket | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 13***12 | Gasket-Water Regulator; (Temperature Regulator Housing) | 1 |
236-4413 Pump Gp-Water
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
177-9823 Pump Gp-Water
| 14***95 | Plug As | 2 |
| 14***09 | Plug As-Sto | 2 |
| 16***19 | Plug As | 1 |
281-3518 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
245-9365 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
Electrical And Starting System
132-1829 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***29 | Alarm Group; -Overload Warning | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
267-7778 Alarm Gp-Travel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 21***00 | Back-Up Alarm Assem. | 1 |
| 26***78 | Alarm Group-Travel | 1 |
177-6972 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 17***72 | Alternator Group-Charging; (Charging) | 1 |
| 18***94 | Alternator Group-Charging; -Waste Handling | 1 |
185-5294 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***42 | Stator Assem. | 1 |
267-7761 Battery & Wiring Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
275-6823 Battery & Wiring Gp -Cold Weather
| 10***20 | Film-Instruction; (Cold Weather)(Start) | 1 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 1 |
| 24***06 | Receptacle As-Connector; (3-Pin) | 1 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
313-7833 Camera & Mounting Gp -Work Area Visual System, Rear
| 31***33 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 32***92 | Bracket As | 1 |
| 33***84 | Camera Group; -Work Area Visual System, Rear | 1 |
336-6684 Camera Gp -Work Area Visual System, Rear
| 25***62 | Kit-Bracket; (Camera) | 1 |
| 33***84 | Camera Group; -Work Area Visual System, Rear | 1 |
309-5891 Control & Mtg Gp-Communication -Product Link 300
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 30***91 | Control & Mtg Group-Communication; -Product Link 300 | 1 |
| 8C***08 | Spacer; (6.5x9.5x25.4-mm Thk) | 4 |
260-2216 Control & Mtg Gp-Communication -Product Link 300
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 26***16 | Control & Mtg Group-Communication; -Product Link 300 | 1 |
| 8C***08 | Spacer; (6.5x9.5x25.4-mm Thk) | 4 |
241-7602 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 13***00 | Clip; (Tab) | 1 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
260-2212 Control & Mtg Gp-Machine
| 22***74 | Control Group-Unprogrammed | 1 |
| 26***12 | Control & Mtg Group-Machine | 1 |
| 9X***80 | Bolt (45mm Long); (M6x1x45-mm) | 4 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 26***42 | Software Group-Communication; (Product Link 300) | 1 |
270-5474 Electronics Gp-Machine
| 27***74 | Electronics Group-Machine | 1 |
| 32***98 | Software Group-Machine | 1 |
| 32***99 | Service Group-Machine | 1 |
260-2171 Electronics Gp-Monitor
| 26***71 | Electronics Group-Monitor | 1 |
| 34***09 | Monitor Group-Operator | 1 |
| 34***10 | Software Group-Monitor | 1 |
267-7802 Fastener Gp-Wiring Harness
| 11***18 | Clip | 1 |
| 26***02 | Fastener Group-Wiring Harness | 1 |
267-7801 Fastener Gp-Wiring Harness -Pedal, Rh
| 11***18 | Clip | 1 |
| 26***01 | Fastener Group-Wiring Harness; -Pedal, Rh | 1 |
259-5295 Fastener Gp-Wiring Harness -Joystick
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
9y-5316 Heater Gp-Jacket Water
| 12***86 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
| 13***17 | Cap As-Dust | 1 |
314-3531 Installation Ar-Communication -Product Link 321sr
| 26***82 | Wiring Group-Communication; -Product Link 300 | 1 |
| 30***86 | Installation Group-Communication; -Product Link 121sr | 1 |
| 30***91 | Control & Mtg Group-Communication; -Product Link 300 | 1 |
264-8546 Installation Ar-Communication -Product Link 121sr
| 26***14 | Installation Group-Communication; -Product Link 121sr | 1 |
| 26***46 | Installation Ar-Communication; -Product Link 121sr | 1 |
| 26***83 | Wiring Group-Communication; -Product Link 121sr | 1 |
264-8545 Installation Ar-Communication
| 26***14 | Installation Group-Communication; -Product Link 121sr | 1 |
| 26***16 | Control & Mtg Group-Communication; -Product Link 300 | 1 |
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
314-3532 Installation Ar-Communication -Product Link 121sr
| 26***83 | Wiring Group-Communication; -Product Link 121sr | 1 |
| 30***86 | Installation Group-Communication; -Product Link 121sr | 1 |
| 31***32 | Installation Ar-Communication; -Product Link 121sr | 1 |
260-2214 Installation Gp-Communication -Product Link 121sr
| 09***10 | Clamp | 3 |
| 16***87 | Washer-Hard; (5.2x16x1.5-mm Thk) | 3 |
| 22***96 | Antenna; (Flexible)(Flex) | 1 |
309-5886 Installation Gp-Communication -Product Link 121sr
| 09***10 | Clamp | 3 |
| 14***97 | Screw-Pan Head; (M4x0.7x12-mm) | 3 |
| 16***87 | Washer-Hard; (5.2x16x1.5-mm Thk) | 3 |
227-7581 Installation Gp-Security
| 20***62 | Key As-Electronic; (Security) | 2 |
| 21***04 | Module Group-Interface; (Key)(Machine Security System) | 1 |
| 21***14 | Key Ring; (Identification) | 2 |
290-9425 Installation Gp-Security
| 20***62 | Key As-Electronic; (Security) | 2 |
| 21***04 | Module Group-Interface; (Key)(Machine Security System) | 1 |
| 21***14 | Key Ring; (Identification) | 2 |
153-2521 Lamp Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
267-7800 Lighting Gp-Flood -Boom
| 11***36 | Clip | 6 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
267-7776 Lighting Gp-Flood -Cab
| 11***43 | Harness As; (Cab) | 1 |
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 16***28 | Relay; (24-Volt)(Quick Cplr Lever, On Position) | 1 |
275-7014 Lighting Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 27***14 | Lighting Group-Flood | 1 |
260-2211 Monitor & Mounting Gp
| 21***80 | Grommet | 1 |
| 26***73 | Control Group-Unprgmed Monitor | 1 |
| 26***11 | Monitor & Mounting Group | 1 |
333-5074 Mounting Gp-Camera
| 31***33 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 32***96 | Cover | 1 |
| 33***74 | Mounting Group-Camera | 1 |
283-2832 Panel Gp-Circuit Breaker
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***82 | Clip | 1 |
251-0544 Panel Gp-Switch -Engine Speed, Start
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
235-8200 Plug Gp-Connector
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 23***00 | Plug Group-Connector; -Engine Harness, Protective Cover | 1 |
| 24***53 | Plug As | 1 |
257-2186 Sensor Gp-Engine
| 10***04 | Tee | 1 |
| 16***61 | Plug As | 1 |
| 17***18 | Tee As | 1 |
330-6040 Sensor Gp-Engine
| 10***04 | Tee | 1 |
| 16***61 | Plug As | 1 |
| 17***18 | Tee As | 1 |
266-6290 Sensor Gp-Liquid Level -Water Separator
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
| 26***90 | Sensor Group-Liquid Level; -Water Separator | 1 |
| 28***11 | Plate As | 1 |
178-2345 Sensor Gp-Liquid Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***34 | Probe As-Liquid Level; (Water Separator) | 1 |
303-3357 Sensor Gp-Pressure
| 29***60 | Sensor Group-Pressure | 1 |
| 30***57 | Sensor Group-Pressure; -Atmospheric, . Spring | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 1 |
266-8650 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
210-1747 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
267-1402 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
194-6725 Sensor Gp-Pressure -Fuel
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
239-2396 Sensor Gp-Pressure -Fuel
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
276-9067 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***27 | Plug As-Connector; (3-Pin) | 1 |
| 27***19 | Sensor Group-Pressure; (Engine Block Oil Inlet) | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
190-6186 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
197-8391 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 0 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
274-7395 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 23***80 | Seal-O-Ring | 1 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
234-5012 Sensor Gp-Temperature
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
274-7396 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
249-9223 Starting Aid Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
266-6347 Starting Aid Gp-Ether
| 1B***81 | Clip (2"Long) | 6 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
314-3637 Starting Ar-Cold Weather
| 26***47 | Starting Aid Group-Ether | 1 |
| 27***23 | Battery & Wiring Group; -Cold Weather | 1 |
| 31***37 | Starting Ar-Cold Weather | 1 |
264-8538 Starting Ar-Cold Weather
| 12***26 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 26***38 | Starting Ar-Cold Weather | 1 |
| 26***47 | Starting Aid Group-Ether | 1 |
314-3638 Starting Ar-Cold Weather
| 26***47 | Starting Aid Group-Ether | 1 |
| 26***79 | Wiring Group-Auxiliary Start Receptacle; -Jump Start | 1 |
| 27***23 | Battery & Wiring Group; -Cold Weather | 1 |
275-3847 Starting Ar-Cold Weather -Cold Weather
| 12***26 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 26***47 | Starting Aid Group-Ether | 1 |
| 26***79 | Wiring Group-Auxiliary Start Receptacle; -Jump Start | 1 |
128-5626 Starting Motor Gp-Electric
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 12***26 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
111-4275 Starting Motor Gp-Electric
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
207-1551 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 19***70 | Solenoid As-Starting Motor; (24-Volt)(Starting Motor) | 1 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
7n-0719 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 1 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***19 | Switch Group-Disconnect; -Battery | 1 |
209-5582 Switch Gp-Magnetic -Air Inlet Heater Relay
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
125-1302 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
245-7932 Switch Gp-Position -Hydraulic Lockout
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
258-0883 Switch Gp-Pressure -Fuel Filter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Pressure; -Fuel Filter, Differential-Fuel Filter | 1 |
106-0107 Switch Gp-Rotary -Throttle Position
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
| 10***10 | Seal | 1 |
319-4420 Switch Gp-Rotary -Throttle Position
| 10***10 | Seal | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 24***08 | Receptacle As-Connector; (6-Pin) | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
275-7190 Switch Gp-Toggle -Quick Coupler
| 27***90 | Switch Group-Toggle; -Quick Coupler | 1 |
| 27***91 | Harness As-Switch | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
238-2485 Switch Gp-Toggle -Quick Coupler Lock
| 23***78 | Switch Group-Toggle; -Quick Coupler-Quick Coupler Lock | 1 |
| 23***85 | Switch Group-Toggle; -Quick Coupler Lock | 1 |
| 25***84 | Bracket As; (Quick Coupler) | 1 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
238-2478 Switch Gp-Toggle
| 23***78 | Switch Group-Toggle; -Quick Coupler-Quick Coupler Lock | 1 |
| 23***79 | Harness As-Wiring; (Quick Coupler Switch) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
239-1134 Valve Gp-Ether Starting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
| 35***89 | Filter; (Ether Start) | 1 |
329-6563 Warning Ar-Overload -Boom Lowering Control Valve
| 26***74 | Lines Group-Sensor | 1 |
| 27***12 | Wiring Group-Overload Warning | 1 |
| 31***68 | Film Group; -Overload Warning Device | 1 |
264-8668 Warning Ar-Overload
| 26***68 | Warning Ar-Overload | 1 |
| 26***74 | Lines Group-Sensor | 1 |
| 27***11 | Wiring Group-Cab | 1 |
267-7779 Wiring Gp-Aux Start Receptacle -Jump Start
| 11***37 | Clip | 6 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
| 26***79 | Wiring Group-Auxiliary Start Receptacle; -Jump Start | 1 |
267-7771 Wiring Gp-Auxiliary Control -1-Pump/2-Pump, 1-Way/2-Way Flw
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
267-7770 Wiring Gp-Auxiliary Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
267-7996 Wiring Gp-Auxiliary Control -Boom
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***36 | Clip | 3 |
| 11***37 | Clip | 1 |
267-7762 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 09***78 | Screw; (Pan Head) | 3 |
| 10***65 | Terminal; (Female) | 16 |
328-0096 Wiring Gp-Cab -Overload Warning
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 4 |
| 32***28 | Switch As-Rocker; (Overload Warning) | 1 |
267-7773 Wiring Gp-Cab -Quick Coupler
| 25***80 | Cover | 1 |
| 26***73 | Wiring Group-Cab; -Quick Coupler | 1 |
| 26***65 | Bracket As | 1 |
275-6811 Wiring Gp-Cab
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 4 |
| 23***15 | Switch As-Rocker; (Overload Warning) | 1 |
267-7775 Wiring Gp-Cab
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
| 20***85 | Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater) | 1 |
327-9995 Wiring Gp-Cab -Rear Vision Camera
| 32***95 | Wiring Group-Cab; -Rear Vision Camera | 1 |
| 32***96 | Harness As-Wiring | 1 |
| 32***98 | Harness As-Auxiliary; (Work Area Visual System, Rear) | 1 |
328-0049 Wiring Gp-Camera -Rear Vision Camera
| 11***36 | Clip | 2 |
| 25***48 | Cable As-Communication; (Camera) | 1 |
| 32***49 | Wiring Group-Camera; -Rear Vision Camera | 1 |
267-7782 Wiring Gp-Communication -Product Link 300
| 12***74 | Cover-Connector; (Wire Router) | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
| 16***90 | Plug As-Connector; (70-Pin) | 1 |
267-7783 Wiring Gp-Communication -Product Link 121sr
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
| 15***58 | Wedge-Plug Lock; (12-Pin) | 1 |
| 23***10 | Plug As-Connector; (6-Pin) | 1 |
267-7765 Wiring Gp-Console -Rh
| 10***64 | Connector-Plug | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
267-7764 Wiring Gp-Console -Lh
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***95 | Strap; (Cable) | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 2 |
267-7763 Wiring Gp-Console
| 26***63 | Wiring Group-Console | 1 |
| 26***64 | Wiring Group-Console; -Lh | 1 |
| 26***65 | Wiring Group-Console; -Rh | 1 |
198-2714 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
330-6022 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
267-7766 Wiring Gp-Fan
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***18 | Sensor Group-Temperature; (Intake Manifold Air) | 1 |
| 11***36 | Clip | 1 |
267-7767 Wiring Gp-Fine Swing
| 11***36 | Clip | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
267-7780 Wiring Gp-Fuel System -Priming Pump
| 13***06 | Film-Identification; (Fuel) | 1 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
267-7781 Wiring Gp-Hammer -Return Filter
| 26***81 | Wiring Group-Hammer; -Return Filter | 1 |
| 26***12 | Harness As-Wiring; (Pump, Return Filter) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 8 |
267-7772 Wiring Gp-Medium Pressure
| 13***89 | Clip; (Ladder) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 24***08 | Receptacle As-Connector; (6-Pin) | 1 |
275-6812 Wiring Gp-Overload Warning
| 11***18 | Clip | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
267-7774 Wiring Gp-Quick Coupler
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
| 24***05 | Receptacle As-Connector; (2-Pin) | 1 |
| 26***74 | Wiring Group-Quick Coupler | 1 |
238-1565 Wiring Gp-Quick Coupler
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
| 23***65 | Wiring Group-Quick Coupler | 1 |
| 23***88 | Harness As-Solenoid; (Quick Coupler Disengage) | 1 |
Engine Arrangement
272-4628 Engine Ar
| 21***76 | Drive Group-Fan | 1 |
| 26***28 | Muffler Group | 1 |
| 27***28 | Engine Ar | 1 |
274-3836 Engine Ar-Complete
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
227-5946 Engine Ar-Core
| 11***43 | Cooler Group-Engine Oil | 1 |
| 17***38 | Turbocharger Group | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
266-6294 Installation Ar-Engine
| 17***14 | Lines Group-Engine Oil Drain | 1 |
| 18***86 | Air Cleaner Group | 1 |
| 24***65 | Radiator & Hydraulic Oil Cooler Group | 1 |
Frame And Body
268-0620 Box Gp-Storage
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 2 |
| 26***20 | Box Group-Storage | 1 |
| 27***28 | Sheet As-Sound Suppression | 1 |
268-0606 Counterweight Gp
| 17***50 | Liner | 1 |
| 18***39 | Liner | 1 |
| 26***06 | Counterweight Group | 1 |
268-0605 Counterweight Gp
| 26***05 | Counterweight Group | 1 |
| 26***06 | Counterweight Group | 1 |
| 4I***91 | Bolt; (M36x4x181-mm) | 6 |
283-3710 Cover As-Sound Suppression
| 28***10 | Cover As-Sound Suppression | 1 |
| 28***60 | Liner | 1 |
| 28***61 | Liner | 1 |
286-5952 Cover As-Sound Suppression
| 28***52 | Cover As-Sound Suppression | 1 |
| 28***53 | Liner | 1 |
| 28***59 | Liner | 1 |
283-3716 Cover As-Sound Suppression
| 28***16 | Cover As-Sound Suppression | 1 |
| 28***14 | Liner | 1 |
| 28***15 | Liner | 1 |
283-3715 Cover As-Sound Suppression
| 28***15 | Cover As-Sound Suppression | 1 |
| 28***12 | Liner | 1 |
| 28***13 | Liner | 1 |
283-3714 Cover As-Sound Suppression
| 23***54 | Cap-Push On | 14 |
| 28***01 | Liner | 1 |
| 28***03 | Liner | 1 |
268-0610 Cover Gp-Access
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 26 |
| 17***14 | Bumper | 1 |
| 21***63 | Liner | 1 |
283-3733 Cover Gp-Hood
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 3 |
| 27***33 | Cover As-Sound Suppression | 1 |
| 28***33 | Cover Group-Hood | 1 |
268-0611 Cover Gp-Side
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 4 |
| 26***11 | Cover Group-Side | 1 |
| 27***22 | Cover As | 1 |
270-9726 Door Gp-Access -Pump Compartment
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***76 | Hinge | 2 |
| 16***87 | Rock As | 1 |
270-9727 Door Gp-Access -Radiator
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***87 | Rock As | 1 |
| 27***27 | Door Group-Access; -Radiator | 1 |
307-7792 Door Gp-Access -Right Side
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***87 | Rock As | 1 |
| 28***54 | Liner | 1 |
270-9724 Door Gp-Access -Return Filter
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 09***18 | Nut (M6x1.0 Thd) | 4 |
270-9706 Door Gp-Access
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 6 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 21***54 | Spring | 1 |
273-7987 Door Gp-Access -Main Control Valve
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 6 |
| 27***24 | Door Group-Access; -Return Filter | 1 |
| 27***87 | Door Group-Access; -Main Control Valve | 1 |
298-3113 Door Gp-Access -Radiator
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***87 | Rock As | 1 |
| 28***57 | Liner | 1 |
298-3115 Door Gp-Access -Pump
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***87 | Rock As | 1 |
| 28***54 | Liner | 1 |
270-9707 Door Gp-Access
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 6 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 21***54 | Spring | 1 |
273-7756 Enclosure Gp-Engine -Cover
| 08***94 | Shim (2.0mm Thick) | 6 |
| 08***95 | Shim (1.0mm Thick) | 6 |
| 08***96 | Shim (0.5mm Thick) | 6 |
267-0320 Frame Gp-Upper
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***64 | Spacer; (103x140x12-mm Thk) | 2 |
| 09***67 | Washer; (22x60x8-mm Thk) | 2 |
267-6741 Gear & Bearing Gp-Swing
| 09***20 | Spacer; (25x44x6-mm Thk) | 40 |
| 09***02 | Pin, Dowel | 1 |
| 14***03 | Cover | 1 |
267-6833 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 22***73 | Seal-Dust | 2 |
| 26***33 | Gear & Bearing Group-Swing | 1 |
268-0616 Guard Gp-Bottom
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 27 |
| 26***16 | Guard Group-Bottom | 1 |
| 27***49 | Plate As | 1 |
268-0607 Guard Gp-Bottom
| 13***74 | Bolt As; (M12x1.75x25-mm) | 27 |
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 6 |
| 26***07 | Guard Group-Bottom | 1 |
268-0612 Guard Gp-Platform
| 08***94 | Shim (2.0mm Thick) | 5 |
| 08***95 | Shim (1.0mm Thick) | 5 |
| 08***96 | Shim (0.5mm Thick) | 5 |
134-8887 Guard Gp-Swivel
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 13***88 | Plate As | 1 |
| 13***91 | Plate As | 1 |
268-0613 Handrail Gp
| 13***77 | Bolt As; (M12x1.75x35-mm) | 8 |
| 17***70 | Clip; (Tab) | 1 |
| 17***71 | Clip; (Slot) | 1 |
268-0604 Hood & Guard Gp
| 08***94 | Shim (2.0mm Thick) | 4 |
| 08***95 | Shim (1.0mm Thick) | 4 |
| 08***96 | Shim (0.5mm Thick) | 4 |
270-9729 Hood Gp-Engine
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 18***62 | Cover | 1 |
| 19***59 | Guard | 1 |
283-3731 Sheet As-Sound Suppression
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 2 |
| 27***51 | Sheet As-Sound Suppression | 1 |
| 28***13 | Sheet As | 1 |
271-0065 Sheet As-Sound Suppression
| 27***65 | Sheet As-Sound Suppression | 1 |
| 28***47 | Liner | 1 |
| 28***48 | Liner | 1 |
283-3734 Sheet As-Sound Suppression
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 5 |
| 17***14 | Bumper | 2 |
| 27***53 | Sheet As-Sound Suppression | 1 |
330-1612 Sheet As-Sound Suppression
| 28***14 | Liner | 1 |
| 28***15 | Liner | 1 |
| 28***16 | Engine Piston, Liner | 1 |
270-9754 Sheet As-Sound Suppression
| 27***54 | Sheet As-Sound Suppression | 1 |
| 28***41 | Liner | 1 |
| 28***42 | Engine Piston, Liner | 1 |
270-9756 Sheet As-Sound Suppression
| 27***56 | Sheet As-Sound Suppression | 1 |
| 28***43 | Liner | 1 |
| 28***44 | Liner | 1 |
286-5933 Sheet As-Sound Suppression
| 23***54 | Cap-Push On | 6 |
| 28***33 | Sheet As-Sound Suppression | 1 |
| 28***35 | Liner | 1 |
270-9751 Sheet As-Sound Suppression
| 27***51 | Sheet As-Sound Suppression | 1 |
| 28***24 | Liner | 1 |
| 28***25 | Liner | 1 |
270-9750 Sheet As-Sound Suppression
| 23***54 | Cap-Push On | 6 |
| 27***50 | Sheet As-Sound Suppression | 1 |
| 28***04 | Liner | 1 |
283-3732 Sheet As-Sound Suppression
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 3 |
| 27***50 | Sheet As-Sound Suppression | 1 |
| 28***32 | Sheet As-Sound Suppression | 1 |
270-9753 Sheet As-Sound Suppression
| 23***54 | Cap-Push On | 4 |
| 27***53 | Sheet As-Sound Suppression | 1 |
| 28***03 | Liner | 1 |
333-5072 Sheet As-Sound Suppression
| 23***54 | Cap-Push On | 2 |
| 28***18 | Liner | 1 |
| 28***62 | Liner | 1 |
273-7652 Sheet As-Sound Suppression
| 23***54 | Cap-Push On | 2 |
| 27***52 | Sheet As-Sound Suppression | 1 |
| 28***18 | Liner | 1 |
269-1512 Step Gp
| 23***65 | Step | 3 |
| 26***12 | Step Group | 1 |
| 8T***38 | Bolt-Pipe As To Main Pump Suction Port | 6 |
324-1012 Step Gp
| 30***82 | Step As | 3 |
| 32***12 | Step Group | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 6 |
268-0617 Storage Gp-Vandalism Guard
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 3 |
| 21***82 | Bolt As | 1 |
| 22***64 | Sheet As | 1 |
270-9755 Support As-Enclosure
| 27***55 | Support As-Enclosure | 1 |
| 28***20 | Liner | 1 |
| 28***21 | Liner | 1 |
283-3730 Support As-Enclosure
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 2 |
| 27***39 | Support As | 1 |
| 27***54 | Sheet As-Sound Suppression | 1 |
270-9749 Support As-Enclosure
| 23***54 | Cap-Push On | 6 |
| 27***49 | Support As-Enclosure | 1 |
| 28***22 | Liner | 1 |
273-7755 Support Gp-Hood
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 82 |
| 13***78 | Bolt As; (M12x1.75x40-mm) | 2 |
| 26***03 | Spacer; (13.5x30x16-mm Thk) | 4 |
268-0618 Support Gp-Precleaner
| 26***18 | Support Group-Precleaner | 1 |
| 27***38 | Support As | 1 |
| 27***39 | Support As | 1 |
Fuel System
266-6289 Filter & Lines Gp-Fuel
| 13***52 | Connector | 1 |
| 13***73 | Valve Group-Fuel Bypass; -Filter | 1 |
| 14***11 | Adapter Group | 1 |
174-9570 Filter Gp-Water Sep & Fuel
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
268-1835 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2585 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
295-1410 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
262-2621 Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 7 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
231-3046 Lines Gp-Fuel
| 03***88 | Connector-Tube Assembly To Main Relief | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***74 | Elbow As | 1 |
268-0636 Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 7 |
| 14***19 | Connector As | 1 |
191-0461 Lines Gp-Injector Hyd Pump
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
| 20***80 | Hose As | 1 |
266-6288 Mounting Gp-Fuel Filter
| 22***75 | Clip | 3 |
| 26***88 | Mounting Group-Fuel Filter | 1 |
| 27***38 | Plate As | 1 |
222-5900 Pump & Mtg Gp-Unit Inj Hyd
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***00 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
222-5958 Pump Gp-Fuel Injection
| 22***58 | Pump Group-Fuel Injection | 1 |
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 29***10 | Injector Group-Fuel | 1 |
268-1839 Pump Gp-Fuel Injection
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***35 | Injector Group-Fuel | 1 |
| 26***39 | Pump Group-Fuel Injection | 1 |
264-8539 Pump Gp-Fuel Priming
| 26***39 | Pump Group-Fuel Priming | 1 |
| 26***80 | Wiring Group-Fuel System; -Priming Pump | 1 |
| 26***36 | Lines Group-Fuel | 1 |
183-2824 Pump Gp-Fuel Priming -Manual
| 18***23 | Pump As-Fuel Priming | 1 |
| 18***24 | Pump Group-Fuel Priming; -Manual | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
205-0108 Pump Gp-Fuel Prm & Prim Filter
| 03***94 | Connector-Flared | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 2 |
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
190-8977 Pump Gp-Fuel Prm & Water Sep
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 19***70 | Base Assembly; (Fuel Priming Pump) | 1 |
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
319-0677 Pump Gp-Unit Injector Hyd
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
304-0677 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
312-0677 Pump Gp-Unit Injector Hyd
| 16***36 | Bolt-Socket Head; (M5x0.8x18-mm) | 3 |
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
295-4777 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
254-4357 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
262-9372 Strainer Gp-Fuel -Float Gauge
| 26***72 | Strainer Group-Fuel; -Float Gauge | 1 |
| 27***70 | Kit-Gauge; (Fuel Strainer) | 1 |
268-0608 Tank & Mtg Gp-Fuel
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 26***08 | Tank & Mtg Group-Fuel | 1 |
| 26***09 | Tank Group-Fuel | 1 |
268-0609 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
333-5120 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
139-6873 Valve Gp-Fuel Bypass -Filter
| 13***73 | Valve Group-Fuel Bypass; -Filter | 1 |
| 9X***37 | Seal-O-Ring | 1 |
298-3147 Valve Gp-Fuel Shutoff
| 26***92 | Nut; (M5x0.8-Thd) | 1 |
| 29***47 | Valve Group-Fuel Shutoff | 1 |
| 29***57 | Stop | 1 |
Hydraulic System
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
352-6860 Accumulator Gp-Hydraulic -Charged
| 35***74 | Accumulator Group-Hydraulic; -Charged | 1 |
| 35***60 | Accumulator Group-Hydraulic; -Charged | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
352-6830 Accumulator Gp-Hydraulic -Charged
| 35***30 | Accumulator Group-Hydraulic; -Charged | 1 |
335-0517 Accumulator Gp-Hydraulic -Charged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 33***17 | Accumulator Group-Hydraulic; -Charged | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***67 | Cap | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
351-9674 Accumulator Gp-Hydraulic -Charged
| 33***17 | Accumulator Group-Hydraulic; -Charged | 1 |
| 35***74 | Accumulator Group-Hydraulic; -Charged | 1 |
| 35***30 | Accumulator Group-Hydraulic; -Charged | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
164-6981 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
256-0077 Actuator Gp-Pump -Driven
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 7 |
256-0074 Actuator Gp-Pump -Drive
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 11 |
255-5843 Control Ar-Auxiliary -Joystick, Modulation Switch
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
| 25***43 | Control Ar-Auxiliary; -Joystick, Modulation Switch | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
323-7766 Control Ar-Auxiliary -Joystick, Modulation Switch
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 32***98 | Control & Mtg Group-Joystick; -With Slide Control | 1 |
259-7857 Control Ar-Auxiliary -Electric Pedal Control
| 22***85 | Control & Mtg Group-Pedal; -Rh | 1 |
| 25***57 | Control Ar-Auxiliary; -Electric Pedal Control | 1 |
| 26***65 | Film Group; -Work Tool Control, Rh Pedal | 1 |
297-0302 Control Ar-Auxiliary -System 5, Pedal Control
| 25***37 | Control Ar-Auxiliary; -System 5 | 1 |
| 25***57 | Control Ar-Auxiliary; -Electric Pedal Control | 1 |
| 26***63 | Lines Group-Pilot; -Pilot Supply | 1 |
259-7858 Control Ar-Auxiliary -Hammer Control, Foot Switch
| 24***65 | Film Group; -Hammer Control, Foot Switch | 1 |
| 25***58 | Control Ar-Auxiliary; -Hammer Control, Foot Switch | 1 |
| 25***59 | Control Group-Foot; -Work Tool | 1 |
259-7841 Control Ar-Auxiliary -Medium Pressure
| 20***65 | Pump & Mounting Group; (Auxiliary) | 1 |
| 25***41 | Control Ar-Auxiliary; -Medium Pressure | 1 |
| 26***72 | Wiring Group-Medium Pressure | 1 |
323-7767 Control Ar-Auxiliary -4-Switch, Joystick
| 24***11 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 32***99 | Control & Mtg Group-Joystick; -4-Switch, Joystick | 1 |
259-7838 Control Ar-Auxiliary -System 14, Combined Function
| 25***13 | Valve & Mtg Group-Control; -Auxiliary | 1 |
| 25***38 | Control Ar-Auxiliary; -System 14, Combined Function | 1 |
| 26***71 | Wiring Group-Auxiliary Control; -1-Pump/2-Pump, 1-Way/2-Way Flw | 1 |
259-7836 Control Ar-Auxiliary -2-Pump, 1-Way Flow, Foot Sw
| 25***13 | Valve & Mtg Group-Control; -Auxiliary | 1 |
| 25***36 | Control Ar-Auxiliary; -2-Pump, 1-Way Flow, Foot Sw | 1 |
| 26***70 | Wiring Group-Auxiliary Control | 1 |
297-0303 Control Ar-Auxiliary -System 5, Joystick Control
| 25***43 | Control Ar-Auxiliary; -Joystick, Modulation Switch | 1 |
| 25***37 | Control Ar-Auxiliary; -System 5 | 1 |
| 26***63 | Lines Group-Pilot; -Pilot Supply | 1 |
259-7837 Control Ar-Auxiliary -System 5
| 25***37 | Control Ar-Auxiliary; -System 5 | 1 |
| 26***70 | Wiring Group-Auxiliary Control | 1 |
| 26***54 | Lines Group-Front; -System 5, 2-Way, 1-Pump | 1 |
268-6847 Control Ar-Coupler
| 26***73 | Wiring Group-Cab; -Quick Coupler | 1 |
| 26***74 | Wiring Group-Quick Coupler | 1 |
| 26***47 | Control Ar-Coupler | 1 |
239-6598 Coupling Gp-Pump
| 23***98 | Coupling Group-Pump | 1 |
| 23***99 | Hub | 1 |
| 3E***95 | Flange | 1 |
266-7934 Cylinder & Lines Gp-Boom -Rh
| 26***34 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 26***35 | Cylinder & Seal Group-Boom | 1 |
| 26***37 | Lines Group-Boom Cylinder; -Rh | 1 |
266-7933 Cylinder & Lines Gp-Boom -Lh
| 26***33 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 26***35 | Cylinder & Seal Group-Boom | 1 |
| 26***36 | Lines Group-Boom Cylinder; -Lh | 1 |
225-4590 Cylinder & Lines Gp-Bucket
| 22***90 | Cylinder & Lines Group-Bucket | 1 |
| 22***91 | Cylinder & Seal Group-Bucket | 1 |
| 22***92 | Lines Group-Bucket Cylinder | 1 |
225-4587 Cylinder & Lines Gp-Stick
| 22***87 | Cylinder & Lines Group-Stick | 1 |
| 22***88 | Cylinder & Seal Group-Stick | 1 |
| 22***89 | Lines Group-Stick Cylinder | 1 |
299-4548 Cylinder & Lines Gp-Stick
| 29***48 | Cylinder & Lines Group-Stick | 1 |
| 29***49 | Lines Group-Stick Cylinder | 1 |
| 30***99 | Cylinder & Seal Group-Stick | 1 |
266-7935 Cylinder & Seal Gp-Boom
| 09***31 | Ring; (Retaining) | 1 |
| 09***21 | Seal-O-Ring (Id=134.40mm) | 1 |
| 09***70 | Ring, Seal | 1 |
225-4591 Cylinder & Seal Gp-Bucket
| 09***20 | Seal-O-Ring | 1 |
| 09***30 | Bearing-Sleeve | 1 |
| 09***10 | Setscrew-Socket; (M14x2x14-mm) | 1 |
300-0199 Cylinder & Seal Gp-Stick
| 08***04 | Ring; (Retaining) | 2 |
| 08***05 | Ring; (Retaining) | 1 |
| 09***23 | Seal-O-Ring (Id=144.40mm) | 1 |
225-4588 Cylinder & Seal Gp-Stick
| 08***04 | Ring; (Retaining) | 2 |
| 08***05 | Ring; (Retaining) | 1 |
| 09***23 | Seal-O-Ring (Id=144.40mm) | 1 |
274-5997 Cylinder Gp-Hydraulic
| 09***28 | Fitting-Grease | 2 |
| 10***40 | Seal-O-Ring; (12.1-mm Id) | 1 |
| 17***06 | Valve Group-Check; (Hydraulic Cylinder, Quick Coupler) | 1 |
191-5537 Drive Gp-Auxiliary Pump
| 09***75 | Pin, Roller | 2 |
| 09***80 | Seal-O-Ring | 1 |
| 09***21 | Seal-O-Ring | 1 |
267-6751 Drive Gp-Swing -Without Motor
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***11 | Washer; (47.3x76x1-mm Thk) | 6 |
267-6750 Drive Gp-Swing -With Motor
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 12***05 | U-Bolt | 1 |
| 17***74 | Motor & Mtg Group-Swing | 1 |
267-6749 Fastener Gp-Swing & Final Dr
| 09***55 | Pin | 1 |
| 11***74 | Bolt; (L=20mm) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
269-9634 Filter & Lines Gp-Hydraulic
| 08***83 | Hose As | 1 |
| 11***29 | Hose As | 1 |
| 11***80 | Hose As | 1 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
264-8544 Filter Ar-Hydraulic
| 26***44 | Filter Ar-Hydraulic | 1 |
| 26***81 | Wiring Group-Hammer; -Return Filter | 1 |
| 26***65 | Lines Group-Front; -Hammer Filter | 1 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 28***94 | Filter Group-Oil; -Hydraulic, Case Drain | 1 |
| 28***95 | Head As-Filter | 1 |
188-4145 Filter Gp-Oil -Hydraulic Return
| 09***57 | Screw-Machine; (M6x1x8.6-mm) | 4 |
| 09***63 | Seal-O-Ring (Id=54.40mm) | 2 |
| 09***82 | Seal-O-Ring | 1 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 09***81 | Seal-O-Ring | 1 |
| 13***23 | Seal-O-Ring | 4 |
| 13***24 | Screw; (M3x0.5x5-mm) | 8 |
266-7913 Filter Gp-Oil -Hydraulic
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***19 | Seal-O-Ring (Id=124.40mm) | 1 |
| 09***73 | Plug, Shipping | 1 |
126-2075 Filter Gp-Oil -Hydraulic, Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***57 | Pipe | 1 |
194-0182 Hose Gp-Hydraulic -Control Valve, Boom
| 11***79 | Flange-Special | 1 |
| 16***73 | Hose As | 1 |
| 16***23 | Tube As | 1 |
194-0177 Hose Gp-Hydraulic -Control Valve, Stick
| 19***77 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***78 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***79 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0176 Hose Gp-Hydraulic -Control Valve, Stick
| 14***65 | Tube As | 1 |
| 16***65 | Hose As | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0178 Hose Gp-Hydraulic -Control Valve, Stick
| 19***78 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 26***12 | Hose As | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
194-0174 Hose Gp-Hydraulic -Control Valve, Stick
| 16***60 | Hose Group-Hydraulic; (Control Valve, Stick) | 1 |
| 19***74 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0180 Hose Gp-Hydraulic -Control Valve, Boom
| 19***80 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 19***82 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
194-0179 Hose Gp-Hydraulic -Control Valve, Stick
| 14***64 | Tube As | 1 |
| 16***69 | Hose As | 1 |
| 19***79 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0181 Hose Gp-Hydraulic -Control Valve, Boom
| 16***62 | Hose As | 1 |
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
259-7862 Hydraulic Ar
| 23***15 | Pump & Mtg Group-Main Hydraulic | 1 |
| 25***24 | Valve Group-Main Control; -Increased Lift | 1 |
| 25***62 | Hydraulic Ar | 1 |
253-6500 Lines Gp-Auxiliary Hydraulic
| 14***38 | Clip | 4 |
| 17***72 | Hose As | 2 |
| 18***77 | Plate | 2 |
268-6839 Lines Gp-Auxiliary Hydraulic -High Pressure
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 4 |
| 12***74 | Plate | 2 |
253-6494 Lines Gp-Auxiliary Hydraulic
| 14***38 | Clip | 8 |
| 18***77 | Plate | 2 |
| 18***78 | Support As | 2 |
268-6838 Lines Gp-Auxiliary Hydraulic -2-Way, High Flow
| 12***74 | Plate | 2 |
| 15***98 | Plate | 2 |
| 15***38 | Plate | 1 |
237-3183 Lines Gp-Auxiliary Hydraulic -Reach
| 12***80 | Tube As | 1 |
| 14***82 | Tube As | 1 |
| 17***16 | Clamp-Half | 4 |
268-6841 Lines Gp-Auxiliary Hydraulic -System 14, Combined Function
| 09***32 | Seal-O-Ring (Id=28.24mm) | 2 |
| 10***00 | Bolt-Socket Head; (M10x1.5x110-mm) | 4 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
268-6843 Lines Gp-Auxiliary Hydraulic -Reach Boom
| 09***91 | Clamp, Single | 2 |
| 15***67 | Clip; (Slot) | 4 |
| 23***22 | Tube As | 1 |
237-3181 Lines Gp-Auxiliary Hydraulic -Reach, Mass
| 17***16 | Clamp-Half | 4 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
293-4934 Lines Gp-Auxiliary Hydraulic -Medium Pressure
| 14***38 | Clip | 8 |
| 18***77 | Plate | 2 |
| 18***78 | Support As | 2 |
293-4935 Lines Gp-Auxiliary Hydraulic -High Pressure
| 17***16 | Clamp-Half | 4 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
269-9630 Lines Gp-Boom
| 15***38 | Plate | 1 |
| 18***18 | Tube As | 1 |
| 18***20 | Tube As | 1 |
269-9637 Lines Gp-Boom -Boom, Swing
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 4 |
| 10***50 | Clamp | 2 |
| 14***35 | Connect Group; (Each Includes) | 1 |
268-6846 Lines Gp-Boom
| 11***41 | Hose As | 2 |
| 13***16 | Hose As | 1 |
| 14***52 | Union As | 2 |
269-9668 Lines Gp-Boom Cylinder -Boom Lowering Control
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***41 | Connector Group | 2 |
266-7937 Lines Gp-Boom Cylinder -Rh
| 09***20 | Holder | 2 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 09***92 | Support | 1 |
266-7936 Lines Gp-Boom Cylinder -Lh
| 09***20 | Holder | 2 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 09***92 | Support | 1 |
225-4592 Lines Gp-Bucket Cylinder
| 09***97 | Seal-O-Ring (Id=29.70mm) | 1 |
| 09***80 | Holder | 1 |
| 22***92 | Lines Group-Bucket Cylinder | 1 |
268-6844 Lines Gp-Coupler -Reach Boom
| 13***80 | Clip | 4 |
| 24***94 | Support As | 2 |
| 24***15 | Tube As | 1 |
253-6501 Lines Gp-Coupler
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
| 21***85 | Hose As | 2 |
207-3590 Lines Gp-Coupler
| 20***90 | Lines Group-Coupler; -Quick, Pin Grabber | 1 |
| 22***87 | Hose As | 1 |
| 22***88 | Hose As | 1 |
253-6495 Lines Gp-Coupler
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
| 25***95 | Lines Group-Coupler; -Stick | 1 |
279-5323 Lines Gp-Coupler -Kit, Pin Grabber
| 12***11 | Coupling-Permanent | 1 |
| 12***13 | Coupling-Permanent | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
269-9646 Lines Gp-Front -Quick Coupler
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***65 | Elbow | 1 |
| 14***19 | Reducer As | 2 |
269-9665 Lines Gp-Front -Hammer Filter
| 09***86 | Clamp; (Hose) | 1 |
| 10***03 | Guard | 1 |
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 8 |
269-9636 Lines Gp-Front -Control Valve
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 4 |
| 10***03 | Bolt; (Socket Head) (M10x1.5x80mm) | 2 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 54 |
269-9659 Lines Gp-Front -Medium Pressure
| 14***25 | Connector As. | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***69 | Adapter Assembly | 1 |
269-9650 Lines Gp-Front -System 3, 1-Way, 2-Pump
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 8 |
| 14***27 | Connector Group | 1 |
269-9652 Lines Gp-Front -System 14, Combined Function
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 8 |
269-9654 Lines Gp-Front -System 5, 2-Way, 1-Pump
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
269-9640 Lines Gp-Hydraulic Oil Cooler
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 10 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 8 |
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 8 |
269-9670 Lines Gp-Pilot -Boom Lowering Control
| 10***73 | Hose As (Nom 06, L=1700mm) | 1 |
| 13***13 | Band; (Marker) (Gray, P) | 4 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
269-9672 Lines Gp-Pilot -Heavy Lift
| 08***41 | Hose As. | 1 |
| 08***66 | Hose As | 1 |
| 12***03 | Valve Group-Solenoid; -Variable Adjustable Boom | 1 |
269-9671 Lines Gp-Pilot -Stick Lowering
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
269-9655 Lines Gp-Pilot -System 5, 2-Way, 1-Pump
| 08***56 | 90 Degrees Elbow | 1 |
| 08***84 | Hose As. | 1 |
| 10***56 | Hose As. | 1 |
269-9644 Lines Gp-Pilot -Control Valve
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
| 08***32 | Hose As (Nom 06, L=900mm) | 1 |
| 08***06 | Hose As | 1 |
269-9642 Lines Gp-Pilot -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
269-9651 Lines Gp-Pilot -Auxiliary
| 08***56 | 90 Degrees Elbow | 1 |
| 08***65 | Hose As (Nom 06, L=570mm) | 1 |
| 10***77 | Hose As (Nom 06, L=2030mm) | 1 |
269-9667 Lines Gp-Pilot -2-Way
| 08***35 | Hose As (Nom 06, L=4150mm) | 1 |
| 08***61 | Hose As | 2 |
| 10***50 | Hose As | 1 |
269-9663 Lines Gp-Pilot -Pilot Supply
| 10***03 | Hose As (Nom 06, L=2600mm) | 1 |
| 11***45 | Guard | 1 |
| 12***08 | Guard | 1 |
269-9643 Lines Gp-Pilot -Control Valve
| 08***84 | Hose As. | 1 |
| 10***66 | Hose As; (Nom 06, L=3730mm) | 4 |
| 11***45 | Guard | 1 |
269-9660 Lines Gp-Pilot -Medium Flow, Rotator Motor
| 08***56 | 90 Degrees Elbow | 1 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 1 |
| 10***26 | Hose As; (Nom 06, L=2480mm) | 1 |
269-9658 Lines Gp-Pilot -Auxiliary
| 08***56 | 90 Degrees Elbow | 1 |
| 08***65 | Hose As (Nom 06, L=570mm) | 1 |
| 08***84 | Hose As. | 1 |
269-9645 Lines Gp-Pilot -Pump
| 08***56 | 90 Degrees Elbow | 1 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
269-9661 Lines Gp-Pump
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
| 13***70 | Hose As | 1 |
| 14***27 | Connector Group | 2 |
269-9641 Lines Gp-Pump
| 10***03 | Bolt-Socket Head; (M16x2x35-mm) | 4 |
| 11***01 | Bolt-Socket Head; (M12x1.75x25-mm) | 8 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
269-9639 Lines Gp-Return -Control Valve, Swing Motor
| 09***06 | Seal-O-Ring (Id=59.40mm) | 1 |
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 6 |
| 10***24 | Bolt-Socket Head; (M12x1.75x100-mm) | 2 |
269-9669 Lines Gp-Return -Boom Lowering Control
| 10***81 | Hose As | 1 |
| 14***22 | Tee As | 1 |
| 19***56 | Hose As | 1 |
269-9674 Lines Gp-Sensor
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 17***96 | Receptacle As | 1 |
| 22***59 | Sensor As-Pressure; (1-Pump/2-Pump, 1-Way Flow) | 1 |
196-0536 Lines Gp-Stick
| 19***36 | Lines Group-Stick | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
196-0537 Lines Gp-Stick
| 19***37 | Lines Group-Stick | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
282-9604 Lines Gp-Stick
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
| 28***04 | Lines Group-Stick | 1 |
225-4589 Lines Gp-Stick Cylinder
| 09***00 | Seal-O-Ring (Id=33.70mm) | 1 |
| 09***47 | Holder | 1 |
| 12***14 | Support | 1 |
299-4549 Lines Gp-Stick Cylinder
| 09***00 | Seal-O-Ring (Id=33.70mm) | 1 |
| 09***47 | Holder | 1 |
| 12***14 | Support | 1 |
237-3012 Lines Gp-Stick Cylinder -Lowering Control
| 09***94 | Clamp, Double | 2 |
| 10***24 | Bolt-Socket Head; (M12x1.75x100-mm) | 4 |
| 11***79 | Support As | 2 |
269-9638 Lines Gp-Travel Motor -Long Carriage
| 10***18 | Grommet | 2 |
| 14***27 | Connector Group | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
239-8998 Manifold Gp-Control -Pilot Oil Supply
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
239-8697 Manifold Gp-Control -Pilot Oil Supply
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
215-5037 Manifold Gp-Control -Pilot Oil Supply
| 21***37 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
179-9774 Motor & Mtg Gp-Swing
| 17***74 | Motor & Mtg Group-Swing | 1 |
| 17***75 | Motor Group-Swing | 1 |
| 6V***04 | Circlip - External | 1 |
191-5606 Motor & Mtg Gp-Travel
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 19***06 | Motor & Mtg Group-Travel | 1 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
334-9978 Motor Gp-Swing
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
179-9775 Motor Gp-Swing
| 17***75 | Motor Group-Swing | 1 |
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 18***75 | Motor Group-Swing | 1 |
334-9971 Motor Gp-Swing
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 33***71 | Motor Group-Swing | 1 |
| 33***78 | Motor Group-Swing | 1 |
188-4175 Motor Gp-Swing
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
271-6376 Motor Gp-Travel
| 08***86 | Adapter | 1 |
| 09***72 | Seal - O-Ring (4.80 mm Id) | 2 |
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
200-3365 Pump & Mtg Gp-Auxiliary
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 2 |
| 20***27 | Coupling | 1 |
| 20***65 | Pump & Mounting Group; (Auxiliary) | 1 |
233-1115 Pump & Mtg Gp-Main Hydraulic
| 23***15 | Pump & Mtg Group-Main Hydraulic | 1 |
| 23***98 | Coupling Group-Pump | 1 |
| 27***59 | Pump Group-Main Hydraulic | 1 |
240-2998 Pump Gp-Gear -Auxiliary
| 20***00 | Kit; (Seal) (Gear Pump) (Includes Lip Seal, Retaining Ring, 2 Strips, & 4 Gaskets) | 1 |
| 24***98 | Pump Group-Gear; -Auxiliary Hydraulic-Auxiliary | 1 |
| 3G***83 | Seal; (Lip Type) | 1 |
272-6959 Pump Gp-Main Hydraulic
| 09***75 | Pin, Roller | 7 |
| 09***82 | Plug, Tapered | 16 |
| 09***46 | Ring; (Retaining) | 2 |
266-8058 Screen Gp-Hydraulic
| 09***39 | Spring | 1 |
| 15***36 | Rod | 1 |
| 20***00 | Screen As; (Hydraulic Tank) | 1 |
297-0560 Spool Gp-Control Valve -Boom Ii
| 10***94 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***60 | Spool Group-Control Valve; -Boom Ii | 1 |
297-0551 Spool Gp-Control Valve -Travel
| 10***96 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***51 | Spool Group-Control Valve; -Travel | 1 |
297-0565 Spool Gp-Control Valve -Bucket
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***65 | Spool Group-Control Valve; -Bucket | 1 |
297-0562 Spool Gp-Control Valve
| 29***49 | Spool Group-Control Valve; -Auxiliary | 1 |
| 29***51 | Spool Group-Control Valve; -Travel | 1 |
| 29***60 | Spool Group-Control Valve; -Boom Ii | 1 |
297-0563 Spool Gp-Control Valve -Stick Ii
| 10***94 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***63 | Spool Group-Control Valve; -Stick Ii | 1 |
297-0549 Spool Gp-Control Valve -Auxiliary
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***49 | Spool Group-Control Valve; -Auxiliary | 1 |
297-0567 Spool Gp-Control Valve -Swing
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 29***67 | Spool Group-Control Valve; -Swing | 1 |
234-4440 Swivel Gp
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 15***82 | Seal | 5 |
269-9632 Tank & Filter Gp-Hydraulic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***30 | Seal-O-Ring (Id=179.30mm) | 1 |
269-9631 Tank & Mtg Gp-Hydraulic
| 26***31 | Tank & Mtg Group-Hydraulic | 1 |
| 26***32 | Tank & Filter Group-Hydraulic | 1 |
| 26***34 | Filter & Lines Group-Hydraulic | 1 |
255-5713 Valve & Mtg Gp-Control -Auxiliary
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***13 | Valve & Mtg Group-Control; -Auxiliary | 1 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
269-9635 Valve & Mtg Gp-Main Control
| 09***69 | Bolt | 4 |
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 19***11 | Washer; (17x40x8-mm Thk) | 4 |
259-7864 Valve Ar-Alt Pattern Control
| 25***15 | Film Group; -2-Way Pattern | 1 |
| 25***64 | Valve Ar-Alt Pattern Control | 1 |
| 26***67 | Lines Group-Pilot; -2-Way | 1 |
259-7866 Valve Ar-Load Control -Stick Cylinder
| 23***12 | Lines Group-Stick Cylinder; -Lowering Control | 1 |
| 25***66 | Valve Ar-Load Control; -Stick Cylinder | 1 |
| 26***46 | Lines Group-Boom | 1 |
259-7865 Valve Ar-Load Control -Boom Cylinder
| 25***65 | Valve Ar-Load Control; -Boom Cylinder | 1 |
| 26***68 | Lines Group-Boom Cylinder; -Boom Lowering Control | 1 |
| 26***69 | Lines Group-Return; -Boom Lowering Control | 1 |
215-4890 Valve Gp-Check -1-Way, 2-Way, Check
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
| 09***00 | Seal - O-Ring (34.40 mm Id) | 1 |
297-0370 Valve Gp-Check
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
259-7378 Valve Gp-Control -Auxiliary
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
239-8826 Valve Gp-Control -Front, Without Housings
| 10***93 | Spring | 3 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
259-7432 Valve Gp-Control -Heavy Lift
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
232-4103 Valve Gp-Control -Medium Pressure
| 23***03 | Valve Group-Control; -Medium Pressure | 1 |
| 25***00 | Valve Group-Relief; -Medium Pressure | 2 |
| 25***01 | Valve Group-Relief; -Cushion, Rotator Motor | 2 |
255-5652 Valve Gp-Control
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
239-8825 Valve Gp-Control -Rear, Without Housings
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
244-8400 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 24***00 | Valve Group-Control; -Without Covers, Housings | 1 |
285-1531 Valve Gp-Control
| 26***03 | Valve Group-Relief; (160-Bar) (2321-Psi) | 2 |
| 28***31 | Valve Group-Control; -Medium Pressure | 1 |
| 28***77 | Valve Group-Relief; (230-Bar) (3336-Psi) | 2 |
225-4843 Valve Gp-Load Control -Stick Cylinder
| 09***94 | Seal-O-Ring (Id=25.70mm) | 2 |
| 09***89 | Ring, Back-Up | 2 |
| 12***97 | Ring | 2 |
255-5680 Valve Gp-Load Control -Stick Drift Red, Line Relief
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
255-5683 Valve Gp-Load Control -Boom Drift Red, Line Relief
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
225-4785 Valve Gp-Load Control -Boom Cylinder
| 09***94 | Seal-O-Ring (Id=25.70mm) | 2 |
| 09***89 | Ring, Back-Up | 2 |
| 12***97 | Ring | 2 |
259-7424 Valve Gp-Main Control -Increased Lift
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***52 | Valve Group-Control; -Front-Rh | 1 |
277-0954 Valve Gp-Manual -Auxiliary
| 27***54 | Valve Group-Manual; -Auxiliary, Shutoff-Stick, High Pressure | 1 |
| 30***66 | Handle | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
270-5947 Valve Gp-Pilot -Travel
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 08***09 | Bellows | 2 |
297-0529 Valve Gp-Pilot -Joystick
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
297-0589 Valve Gp-Pilot -Joystick
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
310-0414 Valve Gp-Pilot -Travel
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 2 |
206-3305 Valve Gp-Pilot -Joystick
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
232-4102 Valve Gp-Pressure Reducing -Boom, Swing Priority
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
310-0210 Valve Gp-Pressure Reducing -Boom, Swing Priority
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
153-5295 Valve Gp-Priority -Swing
| 10***89 | Seal-O-Ring | 2 |
| 10***73 | Seal-O-Ring | 2 |
| 14***74 | Valve | 1 |
222-0084 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
259-7600 Valve Gp-Relief -Medium Pressure
| 25***00 | Valve Group-Relief; -Medium Pressure | 1 |
184-3830 Valve Gp-Relief -Swing Motor
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***13 | Body As | 1 |
| 16***63 | Retainer | 1 |
109-2667 Valve Gp-Relief
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 10***65 | Body-Valve | 1 |
310-0394 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
177-2653 Valve Gp-Relief
| 17***53 | Valve Group-Relief; -With Block | 1 |
| 31***94 | Valve Group-Relief, Male Union Elbow | 1 |
310-0393 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
255-5661 Valve Gp-Relief -Line
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
173-3536 Valve Gp-Relief -Cushion Crossover
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***85 | Ring; (Back Up) | 1 |
| 17***36 | Valve Group-Relief; -Cushion Crossover | 1 |
259-7601 Valve Gp-Relief -Cushion, Rotator Motor
| 25***01 | Valve Group-Relief; -Cushion, Rotator Motor | 1 |
255-5662 Valve Gp-Relief -Line
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
204-2755 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
109-5152 Valve Gp-Relief -Negative Flow Control
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
153-5313 Valve Gp-Relief -Negative Flow Control
| 10***67 | Valve Group-Relief; -Negative Flow Control | 1 |
| 15***39 | Cover | 1 |
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
239-8774 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
229-1082 Valve Gp-Selector -Alt Pattern Control, 2-Way
| 00***03 | Ball | 1 |
| 08***81 | Needle | 4 |
| 09***65 | Plug, Tapered | 7 |
259-7732 Valve Gp-Shuttle -Swing
| 25***32 | Valve Group-Shuttle; -Swing | 1 |
| 25***33 | Connector | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
171-0198 Valve Gp-Shuttle
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 17***98 | Valve Group-Shuttle | 1 |
| 18***07 | Kit-Seal; (Shuttle Valve) | 1 |
185-0462 Valve Gp-Shuttle
| 09***78 | Seal-O-Ring (Id=9.80mm) | 7 |
| 10***79 | Plug | 7 |
| 16***64 | Seat | 6 |
123-2430 Valve Gp-Shuttle
| 12***30 | Valve Group-Shuttle; (Work Tool) | 1 |
| 12***31 | Body-Valve | 1 |
| 12***52 | Connector | 2 |
111-9916 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
171-0188 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 17***88 | Valve Group-Solenoid; -Neg Flow Cont, Propn Red Valve | 1 |
| 17***98 | Valve Group-Shuttle | 2 |
121-6303 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
121-1491 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
315-4412 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***15 | Seal-O-Ring (Id=12.42mm) | 1 |
259-7430 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 2 |
| 25***30 | Valve Group-Solenoid; -Pressure Reducing | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 4 |
116-3526 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
259-7429 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 4 |
| 25***29 | Valve Group-Solenoid; -4-Function | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 8 |
328-2035 Valve Gp-Solenoid & Manifold -Quick Coupler
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
260-3877 Valve Gp-Solenoid & Manifold -Quick Coupler
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
323-7559 Valve Gp-Solenoid & Relief
| 08***38 | Seal-O-Ring | 1 |
| 10***41 | Ring; (Retaining) | 1 |
| 10***17 | Spring | 1 |
244-8507 Valve Gp-Solenoid & Relief
| 08***38 | Seal-O-Ring | 1 |
| 10***17 | Spring | 1 |
| 10***18 | Ring; (Backup) | 1 |
323-7558 Valve Gp-Solenoid & Relief -With Block
| 32***58 | Valve Group-Solenoid & Relief; -With Block | 1 |
| 32***59 | Valve Group-Solenoid & Relief | 1 |
244-8506 Valve Gp-Solenoid & Relief -Line Relief, Work Tool
| 16***27 | Block | 1 |
| 24***06 | Valve Group-Solenoid & Relief; -Line Relief, Work Tool | 1 |
| 24***07 | Valve Group-Solenoid & Relief; -1-Way, 2-Way Flow | 1 |
322-8716 Valve Gp-Swing Cushion -Fine Swing
| 09***76 | Seal-O-Ring | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
| 13***88 | Orifice | 2 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 09***76 | Seal-O-Ring | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
204-2819 Valve Gp-Travel Counterbalance
| 09***45 | Washer; (28.5x37x2-mm Thk) | 2 |
| 20***55 | Valve Group-Relief; -Crossover | 2 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
Implements
314-3563 Boom Ar-1 Piece Long -Heavy-Duty
| 18***16 | Lines Group-Grease; -1-Piece Long Boom | 1 |
| 22***87 | Cylinder & Lines Group-Stick | 1 |
| 26***33 | Cylinder & Lines Group-Boom; -Lh | 1 |
298-4096 Boom Ar-1 Piece Long
| 18***16 | Lines Group-Grease; -1-Piece Long Boom | 1 |
| 26***33 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 26***34 | Cylinder & Lines Group-Boom; -Rh | 1 |
264-8534 Boom Ar-1 Piece Long
| 18***16 | Lines Group-Grease; -1-Piece Long Boom | 1 |
| 22***87 | Cylinder & Lines Group-Stick | 1 |
| 26***34 | Boom Ar-1 Piece Long | 1 |
321-2068 Boom Gp -Heavy-Duty
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
269-1506 Boom Gp
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
180-7816 Lines Gp-Grease -1-Piece Long Boom
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 11***77 | Hose As | 1 |
| 11***78 | Hose As | 1 |
247-7331 Linkage Ar-Bucket -Cb2-Family
| 22***90 | Cylinder & Lines Group-Bucket | 1 |
| 24***31 | Linkage Ar-Bucket; -Cb2-Family, With Lifting Eye | 1 |
| 25***97 | Linkage Group-Bucket; -Cb2-Family | 1 |
251-2597 Linkage Gp-Bucket -Cb2-Family
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***45 | Seal-O-Ring | 4 |
| 16***87 | Shim; (2-mm Thk) | 2 |
282-9599 Stick Ar-Hoe -Reach
| 28***97 | Stick Group-Hoe | 1 |
| 28***99 | Stick Ar-Hoe; -Reach | 1 |
| 28***04 | Lines Group-Stick | 1 |
229-1762 Stick Ar-Hoe
| 19***36 | Lines Group-Stick | 1 |
| 22***26 | Stick Group-Hoe; -Cb-Family | 1 |
| 22***62 | Stick Ar-Hoe; -Cb-Family | 1 |
229-1765 Stick Ar-Hoe
| 19***37 | Lines Group-Stick | 1 |
| 22***24 | Stick Group-Hoe; -Reach | 1 |
| 22***65 | Stick Ar-Hoe; -Reach | 1 |
228-5524 Stick Gp-Hoe
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
280-2597 Stick Gp-Hoe
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
228-5526 Stick Gp-Hoe
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
Lubrication System
191-0523 Adapter Gp-Oil Line -Fuel Injection Pump
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 19***22 | Adapter | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
222-5946 Breather Gp
| 14***54 | Bolt; (M8x1.25x105-mm) | 1 |
| 16***10 | Breather As; (Crankcase) | 1 |
| 22***46 | Breather Group; -Crankcase | 1 |
271-9263 Filter Gp-Engine Oil -Engine
| 03***44 | Elbow; (Swivel - 37 Degree Flared) | 1 |
| 12***07 | Base | 1 |
| 14***29 | Connector As | 1 |
271-9264 Fumes Disposal Gp
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 09***29 | Connector | 2 |
| 24***73 | Elbow | 1 |
177-4814 Gauge Gp-Oil Level (Dipstick) -Engine
| 13***26 | Bracket | 1 |
| 17***79 | Gauge As-Oil Level; (Engine) | 1 |
| 17***14 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
7c-2475 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 4 |
171-9114 Lines Gp-Engine Oil Drain
| 09***88 | Clamp; (Hose) | 1 |
| 17***14 | Lines Group-Engine Oil Drain | 1 |
| 20***83 | Valve As; (Oil Drain) | 1 |
280-4371 Lines Gp-Turbocharger Oil
| 11***42 | Adapter | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 19***19 | Gasket; (Coated Metal) | 1 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
192-2981 Pump Gp-Engine Oil
| 19***81 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
Machine Arrangement
264-8528 Chassis Ar
| 24***11 | Mounting Group-Platform | 1 |
| 25***17 | Lines Group-Air Conditioner | 1 |
| 25***18 | Washer Group-Window | 1 |
264-8523 General Ar
| 25***62 | Hydraulic Ar | 1 |
| 26***71 | Electronics Group-Monitor | 1 |
| 26***23 | General Ar | 1 |
Operator Station
259-7260 Air Conditioner & Mounting Gp
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 1 |
| 11***36 | Clip | 1 |
| 11***68 | Seal-O-Ring (Id=13.8mm); (Id=13.80mm) | 1 |
259-7259 Air Conditioner Ar
| 25***59 | Air Conditioner Ar | 1 |
| 25***60 | Air Conditioner & Mounting Group | 1 |
| 25***62 | Duct Group-Cab Air | 1 |
259-7261 Air Conditioner Gp
| 12***42 | Relay; (Blower Motor) | 3 |
| 12***46 | Thermistor; (Temperature-Heater Core) | 1 |
| 22***31 | Screw-Self-Tapping | 56 |
259-7347 Armrest Gp -Lh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
259-7346 Armrest Gp -Rh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***51 | Support As | 1 |
259-7295 Bracket Gp-Mirror
| 25***95 | Bracket Group-Mirror | 1 |
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
346-7375 Bracket Gp-Mirror
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 34***75 | Bracket Group-Mirror | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
336-1149 Cab Gp
| 33***38 | Cab Group | 1 |
| 33***49 | Cab Group | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 3 |
259-7276 Cab Gp
| 25***76 | Cab Group | 1 |
| 25***77 | Cab Group | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 3 |
336-1202 Cab Gp
| 33***38 | Cab Group | 1 |
| 33***02 | Cab Group | 1 |
| 8T***79 | Bolt-Plt; (M16 X 2.0 X 35) | 3 |
293-1284 Cab Gp
| 25***77 | Cab Group | 1 |
| 29***84 | Cab Group | 1 |
| 8T***79 | Bolt-Plt; (M16 X 2.0 X 35) | 3 |
259-7277 Cab Gp
| 08***84 | Grommet | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 1 |
| 09***55 | Screw-Machine; (M4x0.07x12-mm) | 2 |
336-1138 Cab Gp
| 08***84 | Grommet | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 1 |
| 09***55 | Screw-Machine; (M4x0.07x12-mm) | 2 |
276-3815 Compressor Gp-Refrigerant
| 13***89 | Clip; (Ladder) | 1 |
| 25***92 | Bolt; (M8x1.25x80-mm) | 2 |
| 27***15 | Compressor Group-Refrigerant | 1 |
259-7216 Condenser & Mtg Gp-Refrigerant
| 25***16 | Condenser & Mtg Group-Refrigerant | 1 |
| 25***62 | Bracket | 1 |
| 25***63 | Bracket As | 1 |
284-4390 Condenser Gp-Refrigerant
| 23***85 | Fan Group-Condenser | 1 |
| 28***90 | Condenser Group-Refrigerant | 1 |
| 28***91 | Condenser As-Refrigerant | 1 |
259-7348 Console Gp-Operator -Rh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
259-7246 Console Gp-Operator
| 17***13 | Guard | 2 |
| 25***46 | Console Group-Operator | 1 |
| 25***47 | Console Group-Operator | 1 |
284-4569 Console Gp-Operator -Lh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 23***79 | Nut-Speed | 6 |
259-7247 Console Gp-Operator
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 23***79 | Nut-Speed | 6 |
259-7598 Control & Mtg Gp-Joystick -With Modulation Switch
| 25***98 | Control & Mtg Group-Joystick; -With Modulation Switch | 1 |
| 25***62 | Control Group-Joystick; -Rh | 1 |
| 25***63 | Control Group-Joystick; -Lh | 1 |
310-0078 Control & Mtg Gp-Joystick
| 29***32 | Control Group-Joystick; -Rh | 1 |
| 29***33 | Control Group-Joystick; -Lh | 1 |
| 31***78 | Control & Mtg Group-Joystick | 1 |
323-7699 Control & Mtg Gp-Joystick -4-Switch, Joystick
| 32***99 | Control & Mtg Group-Joystick; -4-Switch, Joystick | 1 |
| 32***55 | Control Group-Joystick; -Rh | 1 |
| 32***56 | Control Group-Joystick; -Lh | 1 |
323-7698 Control & Mtg Gp-Joystick -With Slide Control
| 32***98 | Control & Mtg Group-Joystick; -With Slide Control | 1 |
| 32***53 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
| 32***54 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
221-8885 Control & Mtg Gp-Pedal -Rh
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***11 | Pedal-Rubber; (Rh) | 1 |
| 12***73 | Pin | 1 |
259-7859 Control Gp-Foot -Work Tool
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1A***21 | Grommet | 1 |
| 20***39 | Switch Group-Pedal; (Work Tool)(Foot Pedal) | 1 |
260-2110 Control Gp-Handle -Joystick, Lh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 22***17 | Handle Group-Joystick; (Lh) | 1 |
260-2109 Control Gp-Handle -Joystick, Rh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
235-8969 Control Gp-Handle -Joystick, Lh
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
| 12***10 | Lever | 1 |
235-8970 Control Gp-Handle -Joystick, Rh
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
| 12***10 | Lever | 1 |
259-7763 Control Gp-Joystick -Lh
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 25***63 | Control Group-Joystick; -Lh | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
297-0532 Control Gp-Joystick -Rh
| 23***70 | Control Group-Handle; -Joystick, Rh | 1 |
| 29***29 | Valve Group-Pilot; -Joystick | 1 |
| 29***32 | Control Group-Joystick; -Rh | 1 |
297-0533 Control Gp-Joystick -Lh
| 23***69 | Control Group-Handle; -Joystick, Lh | 1 |
| 29***29 | Valve Group-Pilot; -Joystick | 1 |
| 29***33 | Control Group-Joystick; -Lh | 1 |
259-7762 Control Gp-Joystick -Rh
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 25***62 | Control Group-Joystick; -Rh | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
297-0534 Control Gp-Joystick -Rh
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
| 29***34 | Control Group-Joystick; -Rh | 1 |
| 29***89 | Valve Group-Pilot; -Joystick | 1 |
297-0535 Control Gp-Joystick -Lh
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
| 29***35 | Control Group-Joystick; -Lh | 1 |
| 29***89 | Valve Group-Pilot; -Joystick | 1 |
323-7756 Control Gp-Joystick -Lh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
323-7755 Control Gp-Joystick -Rh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
247-5276 Control Gp-Pedal -Electric
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
| 24***12 | Boot | 1 |
309-5808 Control Gp-Pedal -Electric
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
| 24***12 | Boot | 1 |
323-7753 Control Gp-Pilot Operated Hyd -Rh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
323-7754 Control Gp-Pilot Operated Hyd -Lh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
170-9497 Control Gp-Pilot Operated Hyd -Travel
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
260-2173 Control Gp-Unprgmed Monitor
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
| 24***95 | Receptacle As-Connector; (12-Pin) | 1 |
| 26***73 | Control Group-Unprgmed Monitor | 1 |
259-7366 Distributor Gp-Air
| 22***17 | Screw-Tapping | 3 |
| 22***54 | Screw-Tapping | 4 |
| 22***60 | Packing | 2 |
273-5202 Door Gp-Cab
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 12***58 | Striker | 2 |
336-1139 Door Gp-Cab
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 12***58 | Striker | 2 |
273-5322 Duct Gp-Cab Air
| 20***43 | Duct Group-Cab Air | 1 |
| 20***47 | Insulator | 1 |
| 20***48 | Insulator | 1 |
259-7262 Duct Gp-Cab Air
| 20***43 | Duct Group-Cab Air | 1 |
| 20***45 | Insulator | 1 |
| 20***46 | Insulator | 1 |
237-2085 Fan Gp-Condenser
| 23***08 | Motor As | 1 |
| 23***09 | Fan | 1 |
| 23***10 | Guard As | 1 |
273-5297 Floor Mat
| 27***97 | Floor Mat | 1 |
273-5299 Floor Mat
| 27***99 | Floor Mat | 1 |
273-5300 Floor Mat
| 27***00 | Floor Mat | 1 |
273-5298 Floor Mat
| 27***98 | Floor Mat | 1 |
275-3848 Guard Ar-Bottom & Swivel
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 24***35 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 26***16 | Guard Group-Bottom | 1 |
235-9030 Guard Ar-Overhead
| 23***30 | Guard Ar-Overhead | 1 |
| 23***31 | Guard Group-Overhead; (Ovhd) (357page) | 1 |
| 23***32 | Guard Group-Front Window; (Wdo-B) (358page) | 1 |
264-8536 Guard Ar-Vandalism
| 26***36 | Guard Ar-Vandalism | 1 |
| 26***17 | Storage Group-Vandalism Guard | 1 |
| 27***80 | Guard Group-Vandalism | 1 |
235-9032 Guard Gp-Front Window
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 23***32 | Guard Group-Front Window; (Wdo-B) (358page) | 1 |
| 29***95 | Film-Certification; (Ops Guard, Read Omm, English) | 1 |
235-9031 Guard Gp-Overhead
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 23***31 | Guard Group-Overhead; (Ovhd) (357page) | 1 |
| 24***86 | Guard As | 1 |
273-5280 Guard Gp-Vandalism
| 12***95 | Pin | 6 |
| 12***96 | Pin | 1 |
| 24***25 | Hinge | 2 |
214-1252 Guard Gp-Window
| 21***52 | Guard Group-Window | 1 |
| 31***46 | Frame As | 1 |
| 8T***92 | Capscrew; (Hex Hd) (M12 X 1.75 X 25, Gr10.9, Z) | 6 |
273-5357 Guard Gp-Window
| 09***05 | Pin, Back-Up Ring, .. Ring; Back-Up | 2 |
| 21***21 | Guard As | 1 |
| 21***22 | Bracket As | 1 |
273-5214 Hatch Gp-Roof
| 12***33 | Packing | 4 |
| 19***44 | Hinge As | 2 |
| 19***46 | Bracket | 1 |
327-6515 Headrest As-Seat -Cloth
| 32***15 | Headrest As-Seat; -Cloth | 1 |
259-7265 Heater & Mtg Gp-Cab
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 1 |
| 11***36 | Clip | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
259-7264 Heater Ar-Cab
| 25***64 | Heater Ar-Cab | 1 |
| 25***65 | Heater & Mtg Group-Cab | 1 |
| 25***67 | Lines Group-Heater | 1 |
259-7266 Heater Gp-Cab
| 12***42 | Relay; (Blower Motor) | 1 |
| 12***46 | Thermistor; (Temperature-Heater Core) | 1 |
| 22***31 | Screw-Self-Tapping | 54 |
267-8071 Horn Gp-Electric
| 26***71 | Horn Group-Electric | 1 |
| 26***72 | Horn Group-Electric | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
291-7559 Horn Gp-Electric
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 13***89 | Clip; (Ladder) | 1 |
267-8072 Horn Gp-Electric
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 11***68 | Bracket | 1 |
329-6571 Installation Ar
| 32***71 | Installation Ar | 1 |
| 32***72 | Installation Ar; -Camera | 1 |
| 33***47 | Mirror Group-Rear View | 1 |
329-6572 Installation Ar -Camera
| 30***87 | Seal/O-Ring, Film Group; -Work Area Visual System, Rear, O Ring Seal, O-Ring | 1 |
| 32***95 | Wiring Group-Cab; -Rear Vision Camera | 1 |
| 32***49 | Wiring Group-Camera; -Rear Vision Camera | 1 |
351-9652 Installation Ar -Accumulator
| 35***52 | Installation Ar; -Accumulator | 1 |
| 35***60 | Accumulator Group-Hydraulic; -Charged | 1 |
085-6444 Latch Gp-Front Window
| 08***44 | Latch Group-Front Window | 1 |
| 08***45 | Lock | 1 |
| 08***46 | Lock | 1 |
259-7217 Lines Gp-Air Conditioner
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 10***73 | Clip | 5 |
| 11***67 | Seal-O-Ring (Id=11.0mm); (Id=11.00mm) | 1 |
259-7267 Lines Gp-Heater
| 12***05 | Joint | 2 |
| 21***21 | Cap As | 1 |
| 21***22 | Cap As | 1 |
7y-0059 Literature Gp
| 09***45 | Cable; (Lanyard) | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
327-6560 Mirror Gp-Rear View
| 32***50 | Mirror Group-Rear View | 1 |
| 32***60 | Mirror Group-Rear View | 1 |
| 32***76 | Support As | 1 |
327-6559 Mirror Gp-Rear View
| 32***50 | Mirror Group-Rear View | 1 |
| 32***59 | Mirror Group-Rear View | 1 |
| 32***76 | Support As | 1 |
333-5147 Mirror Gp-Rear View
| 16***58 | Bolt-Socket Head; (M10x1.5x55-mm) | 4 |
| 17***79 | Clamp | 2 |
| 17***80 | Sleeve | 4 |
327-6550 Mirror Gp-Rear View
| 32***50 | Mirror Group-Rear View | 1 |
| 8T***69 | Bolt-Socket Hd; (M6 X 1.0 X 20) | 2 |
| 9X***56 | Washer; (6.6x12x2-mm Thk) | 2 |
268-0614 Mirror Gp-Rear View
| 13***73 | Bolt As; (M12x1.75x25-mm) | 2 |
| 16***48 | Mirror | 1 |
| 26***14 | Mirror Group-Rear View | 1 |
327-7484 Monitor Gp-Operator
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
| 24***95 | Receptacle As-Connector; (12-Pin) | 1 |
319-4355 Monitor Gp-Operator
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 17 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
| 24***95 | Receptacle As-Connector; (12-Pin) | 1 |
245-7811 Mounting Gp-Platform
| 23***62 | Mount As | 4 |
| 24***11 | Mounting Group-Platform | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 16 |
259-7269 Operator Ar
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 25***46 | Console Group-Operator | 1 |
| 25***48 | Support Group-Seat | 1 |
259-7258 Platform Gp-Operator
| 18***25 | Cover | 1 |
| 18***32 | Cover | 1 |
| 19***25 | Strip | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
240-5039 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 24***39 | Seat Belt Group; -Retractable, 76-mm | 1 |
235-9020 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
273-5411 Seat Gp -Cloth
| 27***11 | Seat Group; -Cloth | 1 |
| 27***12 | Seat Group; -Cloth | 1 |
| 35***96 | Spacer | 2 |
273-5423 Seat Gp -High Back, Cloth
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
| 24***87 | Lever-Control | 1 |
273-5413 Seat Gp -Cloth
| 27***13 | Seat Group; -Cloth | 1 |
| 28***78 | Kit-Seat | 1 |
| 28***84 | Kit-Adjuster | 1 |
273-5417 Seat Gp
| 27***17 | Seat Group | 1 |
| 28***79 | Kit-Seat | 1 |
| 28***84 | Kit-Adjuster | 1 |
273-5416 Seat Gp -Cloth
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 4 |
| 27***14 | Support Group-Seat | 1 |
| 27***16 | Seat Group; -Cloth | 1 |
273-5415 Seat Gp -Cloth
| 27***15 | Seat Group; -Cloth | 1 |
| 27***16 | Seat Group; -Cloth | 1 |
| 35***96 | Spacer | 2 |
273-5432 Seat Gp -Cloth
| 24***87 | Lever-Control | 1 |
| 24***98 | Screw-Button Head; (M8x1.25x25-mm) | 4 |
| 27***32 | Seat Group; -Cloth | 1 |
273-5412 Seat Gp -Cloth
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 4 |
| 27***12 | Seat Group; -Cloth | 1 |
| 27***13 | Seat Group; -Cloth | 1 |
273-5426 Seat Gp -High Back, With Heater
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
| 24***87 | Lever-Control | 1 |
273-5418 Seat Gp-Suspension -Cloth
| 27***18 | Seat Group-Suspension; -Cloth | 1 |
| 27***19 | Seat Group-Suspension; -Cloth | 1 |
| 35***96 | Spacer | 2 |
273-5419 Seat Gp-Suspension -Cloth
| 27***19 | Seat Group-Suspension; -Cloth | 1 |
| 27***20 | Suspension Group-Seat | 1 |
| 27***32 | Seat Group; -Cloth | 1 |
273-5424 Seat Gp-Suspension -High Back, With Heater
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 4 |
| 23***11 | Switch As-Rocker; (Heated Seat) | 1 |
273-5421 Seat Gp-Suspension -High Back, Cloth
| 27***21 | Seat Group-Suspension; -High Back, Cloth | 1 |
| 27***22 | Seat Group-Suspension; -High Back, Cloth | 1 |
| 35***96 | Spacer | 2 |
273-5422 Seat Gp-Suspension -High Back, Cloth
| 27***20 | Suspension Group-Seat | 1 |
| 27***22 | Seat Group-Suspension; -High Back, Cloth | 1 |
| 27***23 | Seat Group; -High Back, Cloth | 1 |
273-5425 Seat Gp-Suspension -High Back, With Heater
| 27***25 | Seat Group-Suspension; -High Back, With Heater | 1 |
| 27***26 | Seat Group; -High Back, With Heater | 1 |
| 27***27 | Suspension Group-Seat | 1 |
259-7248 Support Gp-Seat
| 25***48 | Support Group-Seat | 1 |
| 25***37 | Support Group-Seat | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
273-5414 Support Gp-Seat
| 24***98 | Screw-Button Head; (M8x1.25x25-mm) | 8 |
| 26***51 | Rail As | 1 |
| 27***14 | Support Group-Seat | 1 |
259-7337 Support Gp-Seat
| 20***40 | Screw; (M6x1x12-mm) | 1 |
| 25***27 | Support As | 1 |
| 25***31 | Cover As-Access | 1 |
273-5420 Suspension Gp-Seat
| 20***32 | Screw-Button Head; (M8x1.25x40-mm) | 8 |
| 20***80 | Cylinder-Damper | 1 |
| 24***68 | Cover As | 1 |
273-5427 Suspension Gp-Seat
| 24***68 | Cover As | 1 |
| 24***95 | Kit-Clip; (Includes 28-Clips) | 1 |
| 24***98 | Screw-Button Head; (M8x1.25x25-mm) | 8 |
284-4533 Visor Gp-Protection
| 28***33 | Visor Group-Protection | 1 |
| 28***34 | Visor | 1 |
| 28***35 | Bracket As | 1 |
259-7218 Washer Gp-Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***01 | Tank As-Window Washer | 1 |
| 25***18 | Washer Group-Window | 1 |
259-7338 Window Ar-Cab
| 18***05 | Film Group; -Secondary Exit | 1 |
| 25***78 | Window Group-Cab; -Rear | 1 |
| 25***38 | Window Ar-Cab | 1 |
259-7278 Window Gp-Cab -Rear
| 25***78 | Window Group-Cab; -Rear | 1 |
| 25***79 | Window Group-Cab | 1 |
| 25***17 | Plate | 1 |
259-7279 Window Gp-Cab
| 19***59 | Retainer | 8 |
| 20***93 | Packing | 16 |
| 20***49 | Cover | 1 |
196-1436 Window Gp-Cab
| 08***44 | Latch Group-Front Window | 2 |
| 19***36 | Window Group-Cab | 1 |
| 21***33 | Frame As | 1 |
196-1432 Window Gp-Front
| 12***87 | Stopper | 2 |
| 12***91 | Snap | 2 |
| 12***01 | Snap | 3 |
273-5344 Wiper Gp-Window
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 19***05 | Motor As-Window Wiper | 1 |
Power Train
227-6189 Drive Gp-Final -Without Motor
| 09***31 | Ring - Retaining | 1 |
| 09***77 | Plate (7.0 mm Thick) | 1 |
| 09***78 | Plate (8.0 mm Thick) | 1 |
227-6196 Drive Gp-Final -Without Motor
| 09***31 | Ring - Retaining | 1 |
| 09***77 | Plate (7.0 mm Thick) | 1 |
| 09***78 | Plate (8.0 mm Thick) | 1 |
227-6188 Final Drive Gp -With Motor
| 19***06 | Motor & Mtg Group-Travel | 1 |
| 22***88 | Final Drive Group; (With Motor) | 1 |
| 22***89 | Drive Group-Final; (Without Motor) | 1 |
227-6195 Final Drive Gp -With Motor
| 19***06 | Motor & Mtg Group-Travel | 1 |
| 22***95 | Final Drive Group; (With Motor) | 1 |
| 22***96 | Drive Group-Final; -Without Motor | 1 |
296-6218 Drive Gp-Final -Without Motor
| 09***31 | Ring - Retaining | 1 |
| 09***77 | Plate (7.0 mm Thick) | 1 |
| 09***78 | Plate (8.0 mm Thick) | 1 |
267-6861 Final Drive Gp -With Motor
| 22***88 | Final Drive Group; (With Motor) | 1 |
| 22***95 | Final Drive Group; (With Motor) | 1 |
| 26***61 | Final Drive Group; -With Motor | 1 |
296-6217 Final Drive Gp -With Motor
| 19***06 | Motor & Mtg Group-Travel | 1 |
| 29***17 | Final Drive Group; (With Motor) | 1 |
| 29***18 | Final Drive Group; -Without Motor | 1 |
227-6198 Housing Gp-Final Drive
| 19***73 | Bearing As-Ball | 2 |
| 19***80 | Housing | 1 |
| 21***37 | Seal Group-Duo Cone | 1 |
267-6748 Power Train Ar
| 16***27 | Sprocket Group | 2 |
| 22***88 | Final Drive Group; (With Motor) | 1 |
| 22***95 | Final Drive Group; (With Motor) | 2 |
168-6727 Sprocket Gp
| 16***27 | Sprocket Group | 1 |
| 6Y***85 | Sprocket; (Track) | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 16 |
Service Equipment And Supplies
298-4281 Film Gp
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
| 29***81 | Film Group | 1 |
| 29***82 | Film-Warning; (Crush Hazard) | 2 |
247-7410 Film Gp -Operator Controls, Notice
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***41 | Film-Information; (Operator Controls, Read Omm)(Joystick W/ Slide Control) | 1 |
282-5705 Film Gp -Quick Coupler
| 26***30 | Film-Warning; (Crush Hazard, Read Omm, U.S.) | 1 |
| 26***31 | Film-Instruction; (Coupler Operation) | 1 |
| 26***72 | Film-Warning; (Crush Hazard, Read Omm, U.S.) | 1 |
247-7411 Film Gp -Operator Controls, Notice
| 24***11 | Film Group; -Operator Controls, Notice | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***42 | Film-Information; (Operator Controls, Read Omm) | 1 |
264-8565 Film Gp -Work Tool Control, Rh Pedal
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***45 | Film-Instruction; (Operator Control Pedals) | 1 |
| 26***65 | Film Group; -Work Tool Control, Rh Pedal | 1 |
303-2787 Film Gp -Work Area Visual System, Rear
| 30***87 | Seal/O-Ring, Film Group; -Work Area Visual System, Rear, O Ring Seal, O-Ring | 1 |
| 31***52 | Film-Instruction; (Battery Life, Camera) | 1 |
247-7465 Film Gp -Hammer Control, Foot Switch
| 17***15 | Film-Instruction; (Hammer Control) | 1 |
| 24***65 | Film Group; -Hammer Control, Foot Switch | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
314-3768 Film Gp -Overload Warning Device
| 31***68 | Film Group; -Overload Warning Device | 1 |
| 32***82 | Film-Warning; (Tipping Hazard, Read Omm) | 1 |
186-1305 Film Gp -Secondary Exit
| 18***05 | Film Group; -Secondary Exit | 1 |
| 22***43 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
255-3115 Film Gp -2-Way Pattern
| 25***15 | Film Group; -2-Way Pattern | 1 |
| 25***71 | Plate-Instruction; (Control Pattern, Read Omm) | 1 |
| 25***73 | Film-Warning; (Crush Hazard, Read Omm, Intl) | 1 |
329-6576 Film Gp-U.S.
| 29***06 | Plate & Film Group | 1 |
| 32***60 | Film-Lifting Cap | 1 |
| 32***76 | Film Group-U.S. | 1 |
264-8531 Plate & Film Gp
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 12***07 | Film-Instruction; (On Radiator Filler Cap) | 2 |
| 13***76 | Film-Identification; (Cat) | 2 |
298-4306 Plate & Film Gp
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***45 | Film-Warning; (Do Not Use Ether, U.S) | 1 |
| 22***13 | Film; (Warning) (Jump Start) (Inside Of Lh Battery Box Cover) | 1 |
Undercarriage
179-3043 Adjustment Gp-Hydraulic Track
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 11***24 | Plate As. | 1 |
| 11***25 | Plate | 1 |
297-9151 Adjustment Gp-Hydraulic Track
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 11***24 | Plate As. | 1 |
| 11***25 | Plate | 1 |
264-8567 Frame Ar-Undercarriage
| 19***02 | Guard Group-Track Guide; -Center | 1 |
| 23***20 | Idler Group-Front | 1 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
267-0151 Frame As-Undercarriage
| 11***72 | Bracket | 4 |
| 26***51 | Frame As-Undercarriage | 1 |
| 26***53 | Frame As-Track Roller; (Rh) | 1 |
189-3860 Guard Gp-Track Guide -Full Length
| 10***24 | Support As | 16 |
| 14***48 | Bolt-Hex Head; (M24x3x350mm) | 16 |
| 18***60 | Guard Group-Track Guide; -Full Length | 1 |
201-2774 Guard Gp-Track Guide -Rear
| 10***24 | Support As | 8 |
| 14***48 | Bolt-Hex Head; (M24x3x350mm) | 8 |
| 18***61 | Guard As-Track Guide | 2 |
192-8302 Guard Gp-Track Guide -Center
| 19***02 | Guard Group-Track Guide; -Center | 1 |
| 19***03 | Guard As-Track Guide | 2 |
| 8T***67 | Washer-Hard; (26x44x4-mm Thk) | 8 |
241-7335 Guard Gp-Travel Motor -Heavy-Duty
| 24***35 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 24***36 | Cover As-Access; (Lh) | 1 |
| 24***37 | Cover As-Access; (Rh) | 1 |
241-7333 Guard Gp-Travel Motor
| 24***33 | Guard Group-Travel Motor | 1 |
| 24***34 | Plate | 2 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 10 |
239-4321 Idler Gp-Front
| 13***22 | Idler Group-Front | 1 |
| 23***21 | Idler Group-Front | 1 |
| 23***22 | Spring Group-Recoil | 1 |
136-2422 Idler Gp-Front
| 10***81 | Seal Group-Duo-Cone | 2 |
| 11***99 | Bearing; (Front Idler) | 2 |
| 13***22 | Idler Group-Front | 1 |
239-4320 Idler Gp-Front
| 23***20 | Idler Group-Front | 1 |
| 23***21 | Idler Group-Front | 2 |
| 29***51 | Adjustment Group-Hydraulic Track | 2 |
201-9119 Link As-Track
| 09***44 | Pin; (Cotter) | 1 |
| 11***02 | Link-Track Master; (Rh) | 1 |
| 11***03 | Link-Track Master; (Lh) | 1 |
239-4352 Roller Ar-Track & Carrier
| 18***74 | Roller Group-Track-Single Flange | 18 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
6y-5323 Roller Gp-Track Carrier
| 17***92 | Seal Group-Duo-Cone | 1 |
| 5H***48 | Seal (Part Of 5d***19 Assem.) | 1 |
| 6Y***23 | Roller Group-Track Carrier | 1 |
183-2874 Roller Gp-Track-Single Flange
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 16***31 | Ring; (Toric) | 2 |
| 17***97 | Collar; (Track Roller) | 2 |
239-4322 Spring Gp-Recoil
| 17***37 | Washer; (62x105x10-mm Thk) | 1 |
| 17***38 | Nut; (M56x5.5-Thd) | 1 |
| 17***40 | Strip | 1 |
314-3564 Track Gp -2-Required
| 26***54 | Track Group; -2-Required | 1 |
| 31***64 | Track Group; -2-Required | 1 |
| 32***12 | Step Group | 1 |
203-0860 Track Gp -2-Required
| 12***40 | Shoe-Track | 49 |
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 20***60 | Track Group; -2-Required, Heavy-Duty | 1 |
260-9454 Track Gp -2-Required
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 23***92 | Shoe-Track | 49 |
| 26***54 | Track Group; -2-Required | 1 |
215-3087 Track Gp -2-Required
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 21***87 | Track Group; -2-Required | 1 |
| 31***50 | Nut-Track; (M22x1.5-Thd) | 196 |
216-4027 Track Gp -2-Required
| 12***66 | Shoe-Track | 49 |
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 21***27 | Track Group; -2-Required | 1 |
260-9446 Track Gp -2-Required
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 26***46 | Track Group; -2-Required | 1 |
| 31***50 | Nut-Track; (M22x1.5-Thd) | 196 |
203-0861 Track Gp -2-Required
| 12***41 | Shoe-Track | 49 |
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 20***61 | Track Group; -2-Required, Heavy-Duty | 1 |
264-8563 Track Gp -2-Required
| 26***46 | Track Group; -2-Required | 1 |
| 26***63 | Track Group; -2-Required | 1 |
| 26***12 | Step Group | 1 |
241-0985 Track Gp -2-Required
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 23***91 | Shoe-Track | 49 |
| 24***85 | Track Group; -2-Required | 1 |
260-9452 Track Gp -2-Required
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 26***52 | Track Group; -2-Required | 1 |
| 31***50 | Nut-Track; (M22x1.5-Thd) | 196 |
Work Tools
302-9680 Coupler Ar-Quick -Cb2-Family
| 20***90 | Lines Group-Coupler; -Quick, Pin Grabber | 1 |
| 24***31 | Linkage Ar-Bucket; -Cb2-Family, With Lifting Eye | 1 |
| 26***13 | Coupler Group-Quick | 1 |
302-9679 Coupler Ar-Quick -Cb2-Family
| 20***90 | Lines Group-Coupler; -Quick, Pin Grabber | 1 |
| 24***31 | Linkage Ar-Bucket; -Cb2-Family, With Lifting Eye | 1 |
| 26***13 | Coupler Group-Quick | 1 |
265-7513 Coupler Gp-Quick
| 09***28 | Fitting-Grease | 4 |
| 11***40 | Screw; (M5x0.8x19-mm) | 2 |
| 17***56 | Bearing | 1 |
268-4450 Pin Gp-Coupler
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 23***31 | Pin As | 2 |
| 26***50 | Pin Group-Coupler | 1 |
328D LCR serial number reference
The PIN plate is a riveted metal tag on the machine frame or upper structure, commonly found on the right side of the cab exterior below the window or on the frame near the RH access area. On the full 17-character PIN, the model code is followed by a 3-letter serial prefix and then sequential digits (e.g., RMX00408) - the letters identify the production block, and the digits place the unit within that block's build run.
| Prefix | Identifies | Notes |
|---|---|---|
| BYH | 328D LCR, long compact-radius undercarriage configuration, Cat C7 ACERT engine | Earliest confirmed factory production block for this model, tied to the 328D LCR in the factory parts catalog. Parts and service documentation for this block is dated late 2008, running from the first unit up, with a matched engine serial block starting in the same period. |
| GTN | 328D LCR, long compact-radius undercarriage configuration, Cat C7 ACERT engine | Tied to the 328D LCR in the factory parts catalog (GTN00001 and up, C7 engine). One dealer sale record (serial ending 00247) places a unit in this block at model-year 2007 - confirm the exact year with your dealer. |
| MKR | 328D LCR, long compact-radius undercarriage configuration, Cat C7 ACERT engine | Tied to the 328D LCR in the factory parts catalog (MKR00001 and up, C7 engine). One dealer sale record (serial ending 00261) places a unit in this block at model-year 2010 - confirm the exact year with your dealer. |
| RMX | 328D LCR, long compact-radius undercarriage configuration, Cat C7 ACERT engine | Best-documented block for this model, per the factory service manual (RMX00001 and up), spanning model-years 2011 through 2014-2015 production (examples seen from roughly unit 00227 through 01045+). Serial climbs roughly in step with build year within this block. |
| SWF | 328D LCR, long compact-radius undercarriage configuration, Cat C7 ACERT engine | Tied to the 328D LCR in the factory parts catalog (SWF00001 and up, C7 engine). No dated sale example found to anchor a model year - confirm the exact year range with your dealer. |
Frequently asked questions
What engine powers the Caterpillar 328D LCR?
The 328D LCR runs a Cat C7 ACERT diesel with the ADEM A4 electronic control module, rated 152 kW (204 hp) net flywheel power. It has no diesel particulate filter — that arrived later with the C7.1 ACERT. The Zeppelin-built tunneling configuration uses a lower engine tune suited to enclosed-site work.
What is the operating weight of the Cat 328D LCR?
The base open-site configuration runs about 34.7 tonnes (76,500 lb) per the factory Specalog. The heavier Zeppelin tunneling-excavator configuration climbs to roughly 39.8 tonnes (87,850 lb) with its reinforced boom and twin-tilt linkage. Confirm the specific configuration and attachment fit before load planning.
What replaced the Caterpillar 328D LCR?
Caterpillar did not catalogue a direct like-for-like LCR nameplate successor after the 328D LCR ended production around 2015. The reduced-tail-swing niche it served continued through later reduced-radius configurations of the 329/336-class excavators rather than a single named replacement — check with a Cat dealer for the current compact-radius option in this weight class.
What 328D LCR owners discuss
What engine issue on the 328D LCR's C7 ACERT shows up most in the field?
Injector wiring on the C7 ACERT HEUI system routes through the valve cover. Heat cycling hardens and shrinks the harness insulation, the bundle works loose from its anchor points, and it chafes against valve springs until it grounds out. Field reports describe a rough idle or single-cylinder miss with no code logged at first, followed by an intermittent injector fault once the insulation wears through. Technicians check connector pins for oil intrusion and ohm-test the harness before condemning an injector; swapping injectors cylinder-to-cylinder is the standard way to prove wiring versus injector.
The excavator won't swing, or the swing feels weak. What do owners say is the cause?
Reports split into two patterns. If every hydraulic function is weak, suspect the main pump or main relief valve, not swing. If only swing is affected, the usual suspects are a sticking swing solenoid, worn seals inside the swing motor, or a swing parking brake that isn't releasing fully. One documented case found swing relief pressure well under specification even after adjustment, pointing to internal motor or relief-valve wear rather than a simple recalibration. Because swing brake and relief settings govern control of a rotating superstructure, have your dealer verify pressure settings and brake release before the machine goes back to work.
Does the LCR's undercarriage wear differently than a standard-radius 328D or 329?
The LCR shares its long undercarriage with the 336D L platform and carries extra track links versus a standard-radius machine, giving a wider, more stable base for piling rigs, hammers, and tunneling gear. That stability comes from a duty cycle skewed toward stationary work with cyclic attachment loads rather than travel miles, so owners report sprocket, idler, and link wear driven more by shock loading and abrasive site debris (demolition rubble, tunnel muck) than by hours on the travel motors. Undercarriage condition is judged by wear stage, not hours alone, and it's commonly cited as roughly half the machine's total ownership cost, so it warrants a close inspection rather than a quick look.
What fault codes come up most often, and what do they actually mean?
An injector pressure short-circuit code is the one most associated with HEUI-equipped C7/C9 ACERT machines, including this one. It flags the injector driver circuit, not necessarily the injector itself; connector corrosion or the chafed valve-cover harness described above can trigger it with no real injector fault. Diagnosis works backward from the ECM: check connectors for corrosion or oil intrusion, ohm-test the harness, and only replace the injector once the wiring is proven good.
Is there more than one generation of this engine to watch for?
The 328D LCR was built around a single engine generation, the Cat C7 ACERT (not the later C7.1), paired with an ADEM A4 control module, certified to Tier 3 / Tier 4 interim flexibility rules. The C7.1 that followed added a clean emissions module with a diesel particulate filter and common-rail fuel delivery; the C7 in this machine did not carry a diesel particulate filter or regen cycle. That means DPF-clogging complaints common in on-highway C7 ACERT truck and RV discussions don't carry over to this excavator. Check the engine data plate rather than assuming truck-engine service bulletins apply.
What should a buyer check on a used 328D LCR before making an offer?
Walk the undercarriage first: sprockets, idlers, carrier rollers, track links and shoes, since wear here drives resale value more than engine hours. Cycle the swing function through full rotation listening for hesitation or noise, and check swing bearing play. Inspect aux hydraulic lines and quick couplers closely if the machine ran hammers, piling rigs, or pulverizers; that circuit sees harder duty than the base excavator functions. Look for oil residue at the valve-cover-to-injector harness area and pull any fault code history. Ask for oil sample history and filter change records, confirm the cab monitor and reversing camera function, and check the frame and counterweight area for dents or weld repairs suggesting prior structural damage. Have your dealer verify hydraulic relief pressures and swing brake condition as part of a pre-purchase inspection.
Why do 328D LCRs turn up so often paired with piling rigs, hammers, or tunneling gear rather than plain digging?
The reduced tail swing radius, about 1900 mm (75 in) versus roughly 3090 mm (122 in) on a standard-radius L-series machine of similar class, plus a counterweight overhang of only about 305 mm (12 in), lets it work close to structures, shoring, or tunnel walls without the rear swinging into obstacles. That's why it gets specified for piling, demolition, and tunneling work over a standard-radius machine. Operators note strong forward visibility, a well laid out cab, and a boom/stick regeneration circuit that speeds boom-down and stick-in cycles. The tradeoff is more auxiliary-hydraulic duty cycling and more shock loading on the undercarriage than a machine used mainly for straight digging.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 328D LCR. Related factory variants of the same model family:
328D LCR
Need a specific 328D LCR part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.