Caterpillar Part reference

0875976shim (1.0mm thick)

Part 0875976 is catalogued as a shim measuring 1.0mm thick. Shims are thin spacer plates used to adjust clearance or alignment between mating parts in a machine assembly. This page covers only this listed shim; its catalog association with the Caterpillar C6 and 320D work-tool adjuster group should be confirmed against the recorded conditions.

Recorded applications

Models and catalog references

Selected catalog references that list this part. A catalog association does not confirm fitment for every machine or configuration.

& More catalog references

Catalog context

Where this part appears

  1. ModelCaterpillar C6
    Browse Caterpillar models
  2. Groupwork tools
  3. Subgroupadjuster group-bucket
  4. Unit250-6418 adjuster gp-bucket -cb-family s/n a6f1-up; a8f1-up part of 269-2644, 269-2646, 269-2647, 269-2648, 269-2657, 269-2658, 269-2660, 269-2666, 269-2667, 276-5803, 276-5804 bucket & adjuster gp an attachment
Reduced catalog diagram for Caterpillar C6 Locked
Diagram previewReduced catalog thumbnail
About diagram access

Check the signed-in Part Book for available diagrams and the complete catalog breakdown.

Parts in this preview

Selected records
Selected catalog parts, with other part numbers masked
Part numberDescription
08***74pin
08***75shim (0.5mm thick)
0875976shim (1.0mm thick) (current part)
13***50plate

Selected entries from this catalog unit. Other part numbers are masked. Confirm the full breakdown and your machine configuration before ordering.

Browse Caterpillar models

General guidance

Component knowledge

Understanding this component

In general, a shim is a thin, precisely dimensioned spacer placed between components to take up gaps, set clearances or correct alignment. Shims are selected by thickness, and the stated thickness is the key identifier when checking whether a listed shim is the right size for a given assembly.

What to check before ordering

Order using the existing part number 0875976 as listed. Before purchasing, check the machine model, serial number and the recorded catalog conditions for the bucket and adjuster group association, since the same shim may be used across several assemblies with different requirements.