Caterpillarexcavator
Caterpillar 329D L
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 329D L is a roughly 30-tonne class hydraulic crawler excavator from Cat's D-series medium excavator lineup, built in the late-2000s to early-2010s. It runs the Cat C7 engine with ACERT Technology, an inline 6-cylinder, 7.2 L unit rated 140 kW (190 hp) in standard trim, with an optional high-power setting of 152 kW (204-207 hp) for harder digging duty. Operating weight spans roughly 28.4-30.1 t (62,700-66,400 lb) depending on boom/stick length, counterweight, and undercarriage configuration ordered. The 329D L's predecessor was the earlier D-series 329 platform it evolved from, and its direct successor is the 329E L, which moved to the smaller-displacement C7.1 ACERT engine. Cat offered the 329D L across multiple configurations: several boom-and-stick combinations from standard digging to mass-excavation work, a long (L) undercarriage for extra stability and lift capacity, a narrower LN track option for tighter working footprints, and a long-reach variant for extended dredging and reach applications.
Across the D-series run, Cat held the same C7 core architecture and made its running changes at the configuration level: standard versus high-power ECM ratings, counterweight and undercarriage packages, and boom/stick length options, rather than a mid-cycle engine swap. ACERT fuel injection held Tier 3 emissions compliance without exhaust aftertreatment hardware, which is a big part of why this generation still holds value on the used market: no DPF or SCR system to maintain, well-stocked C7 service parts, and a simpler emissions and electrical system than the C7.1-based 329E L that replaced it. In the parts and used-equipment market today, the 329D L sits in a sweet spot: a mechanically proven fuel system, wide parts availability, and a large enough working population that its common failure points, injector seals, duo-cone seals, and harness insulation, are well understood and manageable with routine planned maintenance.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 329D L specifications
Engine
| Engine model | Cat C7 with ACERT Technology, inline 6-cylinder diesel |
| Net power, standard rating | 140 kW (190 hp) at 1800 rpm |
| Net power, high-power rating | 152 kW (204-207 hp) at 1800 rpm. Hp figure varies by conversion standard (SAE/imperial vs metric PS) used on different editions of the factory spec sheet |
| Power configuration note | Global spec sheets list 140 kW as standard with 152 kW offered as an optional high-power rating; the North/Latin America spec sheet lists 152 kW as the sole published rating for this market |
| Displacement | 7.2 L (440 cu in) |
| Bore x stroke | 110 mm x 127 mm (4.3 in x 5.0 in) |
| Cylinders | 6, inline |
| Emissions tier | U.S. EPA Tier 3 and EU Stage IIIA, where regulated or when the emissions-compliant engine attachment is selected |
Weights
| Operating weight, 329D L (long undercarriage, 800 mm shoes) | 29 240-30 110 kg (64,460-66,380 lb), varies by boom/stick/bucket configuration |
| Operating weight, 329D LN (long-narrow undercarriage, 600 mm shoes) | 28 410-29 100 kg (62,630-64,150 lb), varies by boom/stick/bucket configuration |
| Ground pressure, 329D L (800 mm shoes) | 0.43-0.44 bar (6.2-6.4 psi) |
| Ground pressure, 329D LN (600 mm shoes) | 0.56-0.57 bar (8.1-8.3 psi) |
| Base machine weight | Chassis with counterweight, less boom and stick, 800 mm shoes: approx. 24 600 kg (54,233 lb) |
| Standard counterweight | approx. 5410 kg (11,927 lb); super-long-reach counterweight approx. 6760 kg (14,903 lb) |
Dimensions
| Transport length | 9860-10 410 mm (32'4"-34'2") with reach or mass boom, up to 14 380 mm (47'2") with the optional super-long-reach boom |
| Transport width | 3190-3390 mm (10'6"-11'1") depending on shoe width (600/700/800 mm) |
| Transport/shipping height | 3180-3632 mm (10'5"-11'11") depending on stick length; 3250 mm (10'8") with the mass excavation boom |
| Tail swing radius | 3080 mm (10'1") |
| Track shoe width | 329D L standard 800 mm (32 in), optional 600/700/900 mm; 329D LN standard 600 mm, optional 700/800 mm; heavy-duty 600/700 mm also offered |
| Ground clearance | approx. 480-490 mm (1'7") |
| Undercarriage/track length | 4860 mm (15'11") |
| Length to center of rollers | 3990 mm (13'1") |
| Track gauge | 329D L 2590 mm (8'6"); 329D LN 2390 mm (7'10") |
| Cab height | approx. 3040-3170 mm (10'0"-10'5"), figure varies slightly between spec-sheet editions |
| Counterweight clearance | approx. 1080-1110 mm (3'7"-3'8") |
Performance
| Max dig depth, reach boom (6.15 m) | 7283-7833 mm (23'11"-25'8"), varies by stick length |
| Max reach at ground, reach boom | 10 656-11 153 mm (35'0"-36'7"), varies by stick length |
| Max cutting height, reach boom | 10 115-10 297 mm (33'2"-33'9") |
| Max dump/loading height, reach boom | 6908-7102 mm (22'8"-23'4") |
| Max dig depth, mass excavation boom (5.55 m) | 6130 mm (20'1") |
| Max reach at ground, mass boom | 9453 mm (31'0") |
| Max cutting height, mass boom | 9227 mm (30'3") |
| Max dump/loading height, mass boom | 5968 mm (19'7") |
| Max dig depth, optional super-long-reach boom (10.2 m) | 14 620 mm (48'0") |
| Max reach at ground, super-long-reach boom | 18 600 mm (61'0") |
| Swing speed | 10.2 rpm |
| Swing torque | 82.2 kN-m (60,628 lb-ft) |
| Travel speed, max | 5.3 km/h (3.3 mph) |
| Drawbar pull, max | 249 kN (55,977 lb) |
| Gradeability | Not published in the factory spec sheets reviewed for this model; verify with your dealer |
Forces
| Bucket digging force (ISO 6015), reach boom | 159-201 kN, varies by stick length and bucket family (Power vs HD/HDR buckets) |
| Bucket digging force (ISO 6015), mass boom | 185-239 kN, varies by bucket family |
| Stick digging force (ISO 6015), reach boom | 118-155 kN, varies by stick length and bucket family |
| Stick digging force (ISO 6015), mass boom | 158-167 kN, varies by bucket family |
| Force variance note | Digging-force figures differ noticeably between spec-sheet editions and by stick/boom/bucket combination; treat as configuration-dependent rather than a single fixed value |
Service capacities (summary)
| Fuel tank | 520 L (137 gal) |
| Hydraulic system, including tank | 310 L (82 gal) |
| Hydraulic tank alone | Listed as either 145 L (38 gal) or 257 L (68 gal) across different factory spec-sheet editions; total system capacity of 310 L is consistent |
| Engine oil | 30 L (7.9 gal) |
| Cooling system | 30 L (7.9 gal) |
| Swing drive, each | 10 L (2.6 gal) |
| Final drive, each | 6 L (1.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
329D L fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 30 L (7.9 US gal) | Cat DEO-ULS or Cat DEO Multigrade diesel engine oil (commercial oil must meet Cat ECF-1-a, ECF-2, or ECF-3). The C7 engine's preferred grade is SAE 10W-30 for ambient range -18 to 40 degC (0 to 104 degF). Full climate range runs SAE 0W-20 (down to -40 degC/-40 degF) through SAE 15W-40 (up to 50 degC/122 degF); Cat DEO SYN (5W-40) or Cat Arctic DEO SYN (0W-30) cover cold-start extremes. |
| Cooling system | 30 L (7.9 US gal) | Cat ELC (Extended Life Coolant), 1:1 premix with water, preferred; protects to about -37 degC (-34 degF) at 50 percent glycol. Cat DEAC (Diesel Engine Antifreeze/Coolant) or a commercial heavy-duty coolant meeting Cat EC-1 (extended life) or ASTM D4985/D6210 (conventional) is acceptable. Do not use coolant that only meets ASTM D3306 (light-duty automotive spec). |
| Fuel tank | 520 L (137 US gal) | Ultra-low sulfur No. 2-D distillate diesel fuel meeting Cat's diesel fuel specification, consistent with the machine's Tier 3/Stage III emissions rating. Biodiesel blends are acceptable only when the base fuel stock still meets the distillate fuel spec; follow the OMM's biodiesel blend limit. |
| Hydraulic system (total, including tank) | 310 L (82 US gal) | Cat HYDO Advanced 10 (SAE 10W) is preferred for ambient range -20 to 40 degC (-4 to 104 degF) and gives the longest drain interval. Second choice: Cat HYDO, Cat MTO, Cat DEO/DEO-ULS, Cat TDTO, Cat Arctic TDTO, Cat TDTO-TMS, Cat DEO SYN, or Cat Arctic DEO SYN, in grades from SAE 0W-20 up to SAE 15W-40 depending on climate. Third choice: commercial oil meeting Cat ECF-1-a, ECF-2, ECF-3, TO-4, or TO-4M with minimum 900 ppm zinc; a biodegradable oil must meet Cat BF-1 and should be cleared with the dealer first for this excavator. This same tank fluid also feeds the swing motor and travel motor hydraulic circuits. |
| Hydraulic tank | 145 L (38 US gal) | Same fluid as the hydraulic system row above (Cat HYDO Advanced 10 preferred). |
| Final drive (each) | 6 L each (1.6 US gal each) | Cat TDTO (Transmission/Drive Train Oil) meeting the Cat TO-4 gear-oil spec. Cat Arctic TDTO synthetic blend SAE 0W-20 is the cold-climate first choice; SAE 10W, SAE 30, or SAE 50 straight-grade Cat TDTO, or Cat TDTO-TMS, cover warmer ambient ranges. Commercial oil meeting Cat TO-4 is an acceptable alternative. Two final drives are fitted, one per track. |
| Swing drive | 10 L (2.6 US gal) | Same Cat TO-4 spec gear oil family as the final drives: Cat TDTO, Cat Arctic TDTO, or Cat TDTO-TMS, graded SAE 0W-20 through SAE 50 by ambient temperature; commercial TO-4 oil is an acceptable substitute. |
| Pilot/other hydraulic circuits | Not separately specified | The pilot control circuit draws from the main hydraulic tank and uses the same hydraulic oil listed for the hydraulic system; no separate refill capacity is published for it. |
| Grease (spec only) | Not applicable (greased at individual pin/bushing points, no fill capacity) | Cat Advanced 3Moly Grease (NLGI 2, lithium-complex base with moly additive) is the preferred extended-interval grease for excavator pin and bushing points. Cat Multipurpose Grease (NLGI 2) is an acceptable general-purpose alternative. Cat Arctic Platinum Grease is recommended for extreme cold climates. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 329D L maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 329D L beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on engine, hydraulic, swing drive, and final drive oil every 250 hours. The C7's injector-seal wear path shows up early as oil-in-coolant or coolant-in-oil before it becomes a head or liner problem, so watch coolant condition results as closely as engine oil trending. Track hydraulic sample results against the 310 L (82 gal) reservoir volume before committing to a full Cat HYDO Advanced 10 change. Flag rising iron or copper in swing drive or final drive samples as early duo-cone seal wear.
Corrective & Common Repairs
Expect duo-cone seal replacement at the travel motor/sprocket interface as the most common undercarriage repair; gear oil weeping there signals debris packing behind the seal faces. On the C7, chase injector seal failures at the first hint of an oily coolant sheen rather than waiting for overheating. Boom and stick cylinder drift traces to worn rod seals or a tired holding/relief valve, not just packing wear. Check the documented wiring harness insulation points near the cab riser and engine harness routing whenever intermittent electrical faults show up.
Overhaul & Rebuild Points
Swing bearing wear is the major overhaul driver on a 329D L working full digging cycles; regrease on schedule and re-torque mounting bolts, then track backlash so bearing replacement gets planned instead of becoming a breakdown. Final drive planetary and duo-cone seal rebuilds usually arrive together once gear oil consumption climbs. Boom, stick, and bucket cylinder reseal work is routine given this machine's duty cycle. On the C7, budget for injector work and valve lash adjustment at major overhaul intervals alongside a turbocharger inspection.
Seasonal & Environment Servicing
Cold-climate starts call for checking Cat DEO-ULS engine oil viscosity grade and Cat ELC coolant freeze protection before winter; a block heater helps protect the C7's injection system on hard cold starts. In hot, dusty environments, clean the radiator and A/C condenser cores more often than the standard interval and inspect undercarriage packing that accelerates duo-cone seal failure. Wet or abrasive digging sites call for shorter swing bearing grease intervals and more frequent boom/stick pin lubrication than the base weekly schedule.
329D L common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 132-7165 | Filter Element As-Air | Air intake service | Check fitment → |
| 093-7521 | Filter-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
329D L fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-04 | Engine oil pressure sensor signal below normal voltage range; system reads this as a loss of oil pressure signal. | Damaged sensor wiring, corroded connector, or a failed oil pressure sensor rather than an actual mechanical oil pressure loss. | Check the sensor connector and wiring for a short to ground before condemning the sensor; confirm actual oil pressure with a mechanical gauge. |
| 110-00 | Engine coolant temperature reading above the normal operating range; engine running hot. | Low coolant level, blocked radiator core or fins, a stuck thermostat, or a slipping/failed fan drive. | Check coolant level and radiator fins for debris, verify the fan drive engages and the thermostat opens, then confirm temperature under a light load before returning to full work. |
| 102-02 | Turbo boost/intake manifold pressure sensor signal erratic or out of expected range. | Blocked or kinked sensor sense line, oil-contaminated port, corroded connector, or a failing boost pressure sensor. | Inspect the sensor hose/port for blockage or oil fouling, check the connector and wiring, replace the sensor if the signal stays erratic. |
| 1961-00 | Hydraulic tank oil temperature reading above normal operating range. | Low hydraulic oil level, a clogged oil cooler core, a weak cooling fan, or sustained heavy hydraulic work in hot ambient conditions. | Check hydraulic oil level and inspect the cooler for debris, confirm cooling fan operation, let the system cool before resuming heavy work. |
| 91-08 | Engine speed dial (throttle) input signal outside its expected range. | Worn or damaged speed dial potentiometer, or a wiring fault at the dial connector. | Check dial wiring and connector, sweep the dial through its full range while watching the signal on Cat ET, replace the dial if the signal does not track smoothly. |
| 190-02 | Engine speed/timing sensor signal erratic or intermittent. | Sensor air gap out of spec, debris on the sensor tip, or chafed wiring near the flywheel housing. | Check sensor gap and mounting, inspect the harness for chafing, clean and reseat the sensor connector. |
| 168-02 | System supply voltage to the engine/machine ECM is intermittent or erratic. | Loose battery terminals, corroded ground straps, or worn keyswitch contacts. | Check and clean battery connections and machine ground straps, test keyswitch supply voltage under load before replacing any modules. |
| 247-09 | Data link communication fault between the machine ECM and the cab monitor display. | Damaged data link wiring, a corroded connector, or a failed ECM/monitor on the CAN/J1939 network. | Inspect the data link harness and connectors between ECMs and the monitor for chafing or corrosion, verify network status with Cat ET before replacing any control module. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
329D L attachments & work tools
Buckets
Bucket capacity for the 329D L runs roughly 1.3-1.9 m3 (1.7-2.5 yd3) across GP and HD/rock buckets, with a 1.5 yd3 (about 1.15 m3) unit listed as Cat's baseline reference bucket; some factory spec sheets show an overall envelope up to about 3.4 yd3 (2.6 m3) depending on boom/stick combination. Bucket width scales with capacity and dig-condition rating and varies by configuration, so treat these as a range, not a fixed spec. Buckets mount pin-on or through a pin-grabber quick coupler on the same linkage.
Hydraulic hammers
Operating weight of 28.4-30.1 t (62,600-66,400 lb) puts the 329D L across the top of the H120 hammer's carrier range (about 17,000-26,000 kg, roughly 1,300 kg service weight) and into the H130's range (about 19,000-32,000 kg, roughly 1,700-1,750 kg service weight). Either performance-class hammer fits this carrier; H130 suits sustained heavy demolition or quarry duty, H120 suits lighter impact energy with faster cycle time.
Quick couplers
The 329D L takes a pin-grabber style quick coupler on the B-linkage family, also referenced as CB-linkage on some attachment catalogs for the 324-330 size range. Bucket and attachment pivot pins for this linkage run about 89-90 mm diameter, so buckets, rippers, and other tools built for that pin size and linkage interchange whether pinned on directly or coupler-mounted.
Thumbs/grapples
Demolition and sorting grapples cover the 329D L within a shared product line spanning roughly 10,000-45,000 kg (22,000-99,200 lb) operating weight; jaws come in skeleton, closed, or perforated shell styles with 360-degree bi-directional rotation for sorting and material handling. Hydraulic thumb kits for this size class are aftermarket bolt-on units that clamp to the bucket linkage pin and are sized to the bucket width chosen; no factory thumb spec is documented specifically for the 329D L, so confirm fitment with the attachment builder before ordering.
Rippers
Single-shank rippers built for the 324-329 size class share the bucket's B/CB-linkage pin-on mounting, with about 90 mm shank pins. They suit breaking compacted, frozen, or lightly cemented ground rather than production rock ripping, which this class is not sized for.
Hydraulic kit notes
An auxiliary hydraulic valve is standard on the 329D L, with dealer-installed control-circuit kits enabling high- and medium-pressure work tools such as hammers, shears, grapples, pulverizers, multiprocessors, and vibratory plate compactors. Its twin-pump cross-sensing hydraulic system routes each pump to up to 100 percent of engine power, supporting strong attachment performance without a separate dedicated high-flow circuit noted in factory literature.
All 329D L assemblies by section
Every catalogued assembly group for the Caterpillar 329D L. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
229-1794 Air Cleaner Ar
| 11***59 | Damper | 1 |
| 13***80 | Precleaner As; (Air) | 1 |
| 13***89 | Clamp | 1 |
255-3053 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
310-9668 Air Cleaner Gp
| 13***65 | Filter Element As-Air; (Primary)(Ultra High Efficiency) | 1 |
| 25***66 | Indicator As-Air Filter Change; (Air Restriction) | 1 |
| 31***68 | Air Cleaner Group | 1 |
233-1127 Air Cleaner Gp
| 23***27 | Air Cleaner Group | 1 |
| 31***68 | Air Cleaner Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
310-9677 Air Cleaner Gp
| 1U***46 | Sealant (For Locations A) | 0 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 31***77 | Air Cleaner Group | 1 |
189-8780 Cover Gp-Air Inlet -Air Inlet Heater
| 18***80 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
294-7675 Cover Gp-Air Inlet
| 11***63 | Elbow | 1 |
| 13***26 | Stud; (M8x1.25x110-mm, M8x1.25x17-mm) | 1 |
| 14***95 | Plug As | 1 |
231-3950 Elbow Gp-Air Inlet
| 14***67 | Clamp; (Hose) | 12 |
| 23***65 | Hose | 1 |
| 23***66 | Hose | 1 |
233-1119 Lines Gp-Air
| 17***73 | Clip | 1 |
| 23***19 | Lines Group-Air; -Turbocharger, Air Cleaner | 1 |
| 27***25 | Tube As | 1 |
210-8175 Lines Gp-Air
| 19***91 | Elbow | 1 |
| 21***75 | Lines Group-Cooling Air; -Turbocharger, Aftercooler | 1 |
| 23***86 | Tube As | 1 |
272-4624 Lines Gp-Muffler Drain
| 21***64 | Manifold-Exhaust; (End) | 2 |
| 21***55 | Manifold-Exhaust; (Center) | 1 |
| 27***56 | Gasket; (Exhaust Manifold) | 6 |
219-5840 Manifold Gp-Exhaust
| 18***92 | Support As | 1 |
| 1W***31 | Clamp-Band; -Turbo Exhaust-Exhaust | 1 |
| 21***40 | Manifold Group-Exhaust | 1 |
222-8299 Muffler Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
250-7696 Turbocharger Gp
| 25***96 | Turbocharger Group | 2 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
| 7C***31 | Gasket-Turbocharger | 1 |
254-3808 Turbocharger Gp
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 25***08 | Turbocharger Group | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
Basic Engine
253-0433 Belt Tensioner Gp
| 19***43 | Belt Tensioner | 1 |
| 25***33 | Belt Tensioner Group | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
253-0437 Bracket Gp-Engine
| 17***73 | Drive Group-Fan | 1 |
| 18***51 | Support-Compressor | 1 |
| 25***37 | Bracket Group-Engine; -Front | 1 |
212-4289 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 21***88 | Camshaft As | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
257-9145 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 3 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 21***21 | Stud; (M8x1.25-Thd) | 3 |
172-8732 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 17***32 | Cover Group-Front Housing | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
118-1727 Cover Gp-Front Housing
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 4W***26 | Cover | 1 |
211-9120 Cover Gp-Front Housing
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 16***76 | Cover As-Front | 1 |
252-2328 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 16***26 | Seal-O-Ring | 1 |
210-5590 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
221-4482 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 22***82 | Cylinder Block Group | 1 |
| 30***41 | Cylinder Block Group | 1 |
263-3774 Cylinder Block Gp
| 26***74 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
305-8141 Cylinder Block Gp
| 10***04 | Sleeve-Cylinder | 0 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 26***74 | Cylinder Block Group | 1 |
314-4184 Cylinder Head As
| 22***00 | Sleeve-Injector | 6 |
| 23***85 | Insert-Valve Seat; (Standard)(Exhaust) | 6 |
| 26***57 | Insert-Valve Seat; (Standard)(Inlet) | 12 |
219-5849 Cylinder Head Gp
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 1 |
| 14***89 | Fastener Group-Cylinder Head | 14 |
300-9550 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
219-5847 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 21***47 | Cylinder Head Group | 1 |
263-1850 Damper & Pulley Gp
| 11***32 | Spacer-Special | 1 |
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 16***21 | Damper Assem. | 1 |
177-6973 Drive Gp-Fan
| 17***73 | Drive Group-Fan | 1 |
| 18***54 | Bracket As | 1 |
| 4W***03 | Cup-Roller Bearing | 2 |
210-8176 Drive Gp-Fan
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 21***76 | Drive Group-Fan | 1 |
258-8723 Fastener Gp-Cylinder Head
| 22***44 | Clip | 3 |
| 24***00 | Spring | 11 |
| 25***23 | Fastener Group-Cylinder Head; -Valve Cover Base | 1 |
252-9551 Fastener Gp-Front Cover
| 25***51 | Fastener Group-Front Housing | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
113-6170 Fastener Gp-Lifting
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 3 |
186-5892 Flywheel Gp
| 18***92 | Flywheel Group | 1 |
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
7w-8813 Housing Gp-Flywheel
| 2P***94 | Plug-Sealing | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
| 7C***33 | Housing-Flywheel | 1 |
245-3260 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
| 24***60 | Housing Group-Front | 1 |
139-4081 Lifter Gp-Valve
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
142-8100 Lifting Gp-Engine
| 14***00 | Lifting Group-Engine; (Engine) | 1 |
| 15***96 | Plate-Lifting; (Rear) | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
233-1120 Mounting Gp-Engine
| 09***59 | Bolt; (M14x2x60-mm) | 6 |
| 09***88 | Bolt; (M14x2x30-mm) | 2 |
| 10***29 | Washer; (21.5x120x8-mm Thk) | 4 |
176-9429 Pan Gp-Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***03 | Plug As-Connector; (2-Pin) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
212-3652 Piston & Rod Gp
| 19***53 | Ring-Piston; (Intermediate) | 1 |
| 19***71 | Pin-Piston | 1 |
| 19***72 | Retainer-Pin | 2 |
210-5592 Piston & Rod Gp
| 16***24 | Pin-Piston | 1 |
| 17***43 | Jet As-Piston Cooling | 1 |
| 19***21 | Bolt; (Connecting Rod) | 2 |
159-0303 Plug Gp-Cylinder Block
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6F***62 | Washer,Flat Transmission Oil Cooler | 1 |
162-8068 Plug Gp-Engine
| 14***95 | Plug As | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
233-1125 Pulley Gp
| 23***25 | Pulley Group | 1 |
| 26***25 | Pulley-Fan | 1 |
| 26***30 | Belt-Serpentine | 1 |
263-1848 Pulley Gp
| 24***96 | Belt-Serpentine | 1 |
| 26***48 | Pulley Group | 1 |
| 29***15 | Pulley-Fan; (8-Groove) | 1 |
256-3831 Rocker Arm Gp
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3834 Rocker Arm Gp
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***09 | Seal Group-Crankshaft | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
| 11***21 | Seal Group-Crankshaft; (Front) | 1 |
235-5528 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
232-3717 Valve Mechanism Gp
| 13***79 | Rod-Valve Push; (Valve Push) | 12 |
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***09 | Bridge-Valve | 6 |
256-3830 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
Cooling System
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 21***76 | Drive Group-Fan | 1 |
| 23***87 | Radiator & Hydraulic Oil Cooler Group | 1 |
229-1787 Cooling Ar-High Ambient Temp
| 16***32 | Motor As; (Hydraulic Fan) | 1 |
| 16***34 | Resistor As; (Hydraulic Fan) | 1 |
| 16***99 | Nut-Flange; (M5x0.8-Thd) | 1 |
336-1156 Fan & Motor Gp
| 23***92 | Fan As; (11-Blades) | 1 |
| 23***01 | Spacer-Fan | 1 |
| 33***56 | Fan & Motor Group; -Condenser | 1 |
230-2893 Fan Gp-Suction
| 12***66 | Gasket | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 13***12 | Gasket-Water Regulator; (Temperature Regulator Housing) | 1 |
192-9972 Housing & Regulator Gp
| 14***95 | Plug As | 2 |
| 14***09 | Plug As-Sto | 2 |
| 16***19 | Plug As | 1 |
236-4413 Pump Gp-Water
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
177-9823 Pump Gp-Water
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
265-3688 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
245-9295 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
230-2887 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
326-3887 Radiator & Hyd Oil Cooler Gp
| 22***45 | Hood Group; -Precleaner | 1 |
| 23***27 | Air Cleaner Group | 1 |
| 32***87 | Radiator & Hydraulic Oil Cooler Group | 1 |
265-3686 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
326-3886 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
Electrical And Starting System
132-1829 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***29 | Alarm Group; -Overload Warning | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
231-1771 Alarm Gp-Travel
| 12***96 | Pulley-Alternator | 1 |
| 18***94 | Alternator Group-Charging; -Waste Handling | 1 |
| 20***99 | Spacer | 1 |
177-6972 Alternator Gp-Charging
| 17***72 | Alternator Group-Charging; (Charging) | 1 |
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
185-5294 Alternator Gp-Charging
| 08***87 | Grommet | 1 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***65 | Grommet | 1 |
251-0429 Battery & Wiring Gp
| 17***29 | Cable As | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
251-0440 Battery & Wiring Gp -Cold Weather
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 13***00 | Clip; (Tab) | 1 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
241-7602 Control & Mtg Gp-Engine Elek
| 22***74 | Control Group-Unprogrammed | 1 |
| 24***02 | Control & Mtg Group-Engine Elek | 1 |
| 9X***80 | Bolt (45mm Long); (M6x1x45-mm) | 4 |
221-8872 Control & Mtg Gp-Machine
| 22***72 | Control & Mtg Group-Machine | 1 |
| 34***61 | Software Group-Machine | 1 |
| 34***62 | Service Group-Machine | 1 |
260-2050 Electronics Gp-Machine
| 26***50 | Electronics Group-Machine; -High Power | 1 |
| 34***08 | Monitor Group-Operator | 1 |
| 34***10 | Software Group-Monitor | 1 |
221-8875 Electronics Gp-Machine
| 22***75 | Electronics Group-Machine | 1 |
| 34***63 | Software Group-Machine | 1 |
| 34***64 | Service Group-Machine | 1 |
221-8861 Electronics Gp-Monitor
| 11***18 | Clip | 1 |
| 15***75 | Ladder Clip | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
259-5237 Fastener Gp-Wiring Harness -Heavy Lift
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
| 17***18 | Band | 1 |
251-0436 Fastener Gp-Wiring Harness
| 25***36 | Fastener Group-Wiring Harness | 1 |
| 7I***73 | Strap-Cable | 1 |
153-2523 Lamp Gp-Flood
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
167-3441 Lamp Gp-Flood
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 1 |
153-2521 Lamp Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
4i-5409 Lighting Gp-Chassis -Front, Rh
| 16***95 | Strap; (Cable) | 2 |
| 16***13 | Cover; (Lh) | 1 |
| 16***14 | Cover; (Rh) | 1 |
238-2300 Lighting Gp-Flood -Boom
| 11***36 | Clip | 9 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
238-2301 Lighting Gp-Flood -Boom
| 23***56 | Panel Group-Circuit Breaker | 1 |
| 23***01 | Lighting Group-Flood; -Mass Boom | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
163-6772 Lighting Gp-Flood -Cab
| 11***36 | Clip | 8 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
238-1432 Panel & Mtg Gp-Circuit Breaker
| 12***23 | Block; (Terminal) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 17***10 | Circuit Breaker As; (80-Ampere) | 2 |
231-1756 Panel Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
| 17***24 | Lamp As; (24-Volt, 3-Watt) | 1 |
251-0542 Panel Gp-Switch -Engine Speed, Start
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 24***53 | Plug As | 1 |
| 25***42 | Panel Group-Switch; -Engine Speed, Start | 1 |
235-8200 Plug Gp-Connector
| 10***04 | Tee | 1 |
| 16***61 | Plug As | 1 |
| 17***18 | Tee As | 1 |
257-2186 Sensor Gp-Engine
| 10***04 | Tee | 1 |
| 16***61 | Plug As | 1 |
| 17***18 | Tee As | 1 |
330-6040 Sensor Gp-Engine
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***34 | Probe As-Liquid Level; (Water Separator) | 1 |
178-2345 Sensor Gp-Liquid Level
| 09***61 | Strap; (Cable) | 2 |
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 2 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
233-1124 Sensor Gp-Liquid Level -Water In Fuel
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 23***24 | Sensor Group-Liquid Level; -Water In Fuel | 1 |
236-6220 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
303-3357 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
239-2396 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
224-4536 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 2 |
210-1747 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 1 |
266-8650 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
194-6725 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
197-8393 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
267-1402 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***27 | Plug As-Connector; (3-Pin) | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
276-9067 Sensor Gp-Pressure
| 27***67 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
| 29***60 | Sensor Group-Pressure | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
197-8394 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 13***45 | Pad; (Connector) | 0 |
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 23***80 | Seal-O-Ring | 1 |
190-6186 Sensor Gp-Speed
| 19***86 | Sensor Group-Speed; -Crankshaft Speed | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
274-7395 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 27***95 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
234-5012 Sensor Gp-Temperature
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
234-5013 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
274-7396 Sensor Gp-Temperature
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
197-8391 Sensor Gp-Temperature
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
249-9223 Starting Aid Gp
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
| 24***94 | Fitting As; (Control) | 1 |
239-6676 Starting Aid Gp-Ether
| 12***26 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 23***76 | Starting Aid Group-Ether | 2 |
| 25***40 | Battery & Wiring Group; -Cold Weather | 1 |
275-3747 Starting Ar-Cold Weather
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
111-4275 Starting Motor Gp-Electric
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 19***70 | Solenoid As-Starting Motor; (24-Volt)(Starting Motor) | 1 |
207-1551 Starting Motor Gp-Electric
| 20***51 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
128-5626 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
7n-0719 Switch Gp-Disconnect -Battery
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
209-5582 Switch Gp-Magnetic
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
125-1302 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***13 | Switch Group-Position; -Hydraulic Lockout | 1 |
258-0883 Switch Gp-Pressure
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 1S***12 | Screw-Tapping | 2 |
| 23***95 | Harness As-Switch; (Refueling Pump, Start) | 1 |
238-1594 Switch Gp-Push Button -Refueling Pump, Start
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 1S***12 | Screw-Tapping | 2 |
| 23***94 | Switch Group-Push Button; -Refueling Pump, Start | 1 |
238-1596 Switch Gp-Push Button -Refueling Pump, Stop
| 10***10 | Seal | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 23***96 | Switch Group-Push Button; -Refueling Pump, Stop | 1 |
319-4420 Switch Gp-Rotary -Throttle Position
| 31***20 | Switch Group-Rotary; -Throttle Position | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
| 23***09 | Switch As-Rocker; (Wiper, Lower)(Lower Washer/Wiper, Disable) | 1 |
239-1134 Valve Gp-Ether Starting
| 09***23 | Screw; (M3x0.5x10-mm) | 3 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 3 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
251-0432 Wiring Gp-Cab
| 11***18 | Clip | 2 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 1 |
| 24***08 | Receptacle As-Connector; (6-Pin) | 1 |
251-0529 Wiring Gp-Cab
| 11***36 | Clip | 3 |
| 11***18 | Clip | 1 |
| 13***89 | Clip; (Ladder) | 1 |
251-0530 Wiring Gp-Combined Flow
| 11***18 | Clip | 2 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 1 |
| 25***30 | Wiring Group-Combined Flow | 1 |
283-2761 Wiring Gp-Communication
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***95 | Strap; (Cable) | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
231-1836 Wiring Gp-Console -Lh
| 23***36 | Wiring Group-Console; -Lh | 2 |
| 25***35 | Wiring Group-Console; -Rh | 1 |
251-0435 Wiring Gp-Console -Rh
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 2 |
| 25***35 | Wiring Group-Console; -Rh | 1 |
| 25***83 | Bracket | 2 |
251-0433 Wiring Gp-Console
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
251-0485 Wiring Gp-Converter
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
198-2714 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
330-6022 Wiring Gp-Engine
| 10***18 | Sensor Group-Temperature; (Intake Manifold Air) | 1 |
| 11***50 | Sleeve (31cm); (31-cm) | 0 |
| 11***18 | Clip | 2 |
251-0448 Wiring Gp-Fan -Clutch
| 11***36 | Clip | 6 |
| 11***37 | Clip | 2 |
| 25***48 | Wiring Group-Fan; -Fan Clutch | 1 |
259-4965 Wiring Gp-Fine Swing
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
251-0430 Wiring Gp-Platform
| 09***91 | Screw-Machine; (M5x0.8x35-mm) | 2 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 2 |
| 21***72 | Switch As-Magnetic; (24-Volt)(Refueling Power Relay) | 1 |
238-1570 Wiring Gp-Refueling Pump -Refueling
| 09***31 | Ring - Retaining | 2 |
| 09***78 | Plate (8.0 mm Thick) | 1 |
| 09***79 | Plate (9.0 mm Thick) | 1 |
238-2208 Switch Gp-Wiper -Lower
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***08 | Wiring Group-Window Wiper; -Lower | 1 |
| 35***89 | Filter; (Ether Start) | 1 |
Engine Arrangement
264-8556 Engine Ar
| 26***50 | Electronics Group-Machine; -High Power | 1 |
| 26***56 | Engine Ar; -High Power | 1 |
| 29***54 | Engine Ar-Complete | 1 |
266-6261 Engine Ar
| 22***99 | Muffler Group | 1 |
| 23***93 | Fan Group-Suction | 1 |
| 26***61 | Engine Ar | 1 |
290-0756 Engine Ar-Complete
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
290-0754 Engine Ar-Complete
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
270-4212 Engine Ar-Core
| 11***43 | Cooler Group-Engine Oil | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
| 19***81 | Pump Group-Engine Oil | 1 |
270-4213 Engine Ar-Core
| 11***43 | Cooler Group-Engine Oil | 1 |
| 17***38 | Turbocharger Group | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
222-8379 Installation Ar-Engine
| 17***14 | Lines Group-Engine Oil Drain | 1 |
| 21***75 | Lines Group-Cooling Air; -Turbocharger, Aftercooler | 1 |
| 22***79 | Installation Ar-Engine | 1 |
Frame And Body
223-3040 Box & Mtg Gp-Storage
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 4 |
223-3041 Box Gp-Storage
| 22***31 | Counterweight Group | 1 |
| 22***41 | Box Group-Storage | 1 |
314-3677 Counterweight Ar
| 24***37 | Spacer; (39x75x20-mm Thk) | 4 |
| 31***77 | Counterweight Ar | 1 |
| 33***47 | Counterweight Group | 1 |
330-1247 Counterweight Gp
| 25***78 | Insulation | 1 |
| 25***79 | Insulation | 2 |
| 33***47 | Counterweight Group | 1 |
223-3022 Counterweight Gp
| 08***33 | Cap | 2 |
| 22***22 | Counterweight Group | 1 |
| 24***37 | Spacer; (39x75x20-mm Thk) | 4 |
223-3031 Counterweight Gp
| 12***71 | Liner | 1 |
| 18***22 | Liner | 1 |
| 22***31 | Counterweight Group | 1 |
330-1244 Counterweight Gp
| 12***71 | Liner | 1 |
| 18***22 | Liner | 1 |
| 23***27 | Insulation | 1 |
330-1430 Cover As-Sound Suppression
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 16***76 | Hinge | 2 |
298-2972 Cover As-Sound Suppression
| 17***15 | Bumper | 1 |
| 17***39 | Liner | 1 |
| 20***27 | Liner | 1 |
256-1677 Cover As-Sound Suppression
| 17***15 | Bumper | 1 |
| 17***39 | Liner | 1 |
| 20***27 | Liner | 1 |
289-6902 Door Gp-Access -Radiator
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***76 | Hinge | 2 |
| 18***62 | Cover | 1 |
289-6903 Door Gp-Access -Pump Compartment
| 16***76 | Hinge | 2 |
| 20***89 | Cushion | 1 |
| 23***47 | Insulation | 1 |
289-6898 Door Gp-Access -Radiator, Lh
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 16***76 | Hinge | 2 |
298-2968 Door Gp-Access -Air Cleaner
| 13***73 | Bolt As; (M12x1.75x25-mm) | 2 |
| 23***02 | Spacer; (15x35x11-mm Thk) | 2 |
| 23***03 | Washer; (25x35x4-mm Thk) | 2 |
223-3042 Fender & Cover Gp
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***64 | Spacer; (103x140x12-mm Thk) | 2 |
| 09***67 | Washer; (22x60x8-mm Thk) | 2 |
228-5504 Frame Gp-Upper
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 22***04 | Frame Group-Upper | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
227-6087 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 22***73 | Seal-Dust | 1 |
| 22***87 | Gear & Bearing Group-Swing | 1 |
227-6088 Gear & Bearing Gp-Swing
| 09***20 | Spacer; (25x44x6-mm Thk) | 35 |
| 09***02 | Pin, Dowel | 1 |
| 14***03 | Cover | 1 |
199-4478 Gear & Bearing Gp-Swing
| 19***78 | Gear & Bearing Group-Swing | 2 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
227-6107 Gear & Bearing Gp-Swing
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 38 |
| 18***84 | Sheet | 1 |
| 22***98 | Sheet | 1 |
262-2486 Guard Gp-Bottom
| 13***73 | Plate As | 1 |
| 13***76 | Plate | 4 |
| 26***86 | Guard Group-Bottom | 1 |
223-3049 Guard Gp-Bottom
| 09***57 | Hinge As | 1 |
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 8 |
| 22***49 | Guard Group-Bottom; -Heavy-Duty | 1 |
223-3047 Guard Gp-Bottom
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 4 |
| 18***95 | Plate As | 1 |
| 22***47 | Guard Group-Bottom | 1 |
130-4272 Guard Gp-Swivel
| 13***72 | Guard Group-Swivel | 1 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 2 |
| 13***78 | Bolt As; (M12x1.75x40-mm) | 3 |
256-1644 Handrail Gp
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
223-3043 Hood & Guard Gp
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
236-3395 Hood Ar -Perforated
| 23***95 | Hood Ar; -Perforated | 1 |
| 23***80 | Support As | 1 |
| 25***78 | Insulation | 1 |
223-3045 Hood Gp
| 09***29 | Cushion | 2 |
| 10***48 | Seal; (0.5-M Each) | 0 |
| 11***89 | Hinge | 2 |
236-9540 Hood Gp-Engine
| 09***29 | Cushion | 2 |
| 10***48 | Seal; (0.5-M Each) | 0 |
| 11***89 | Hinge | 2 |
262-2464 Hood Gp-Engine
| 23***88 | Insulation | 1 |
| 23***89 | Sheet As | 1 |
| 25***08 | Insulation | 1 |
256-1698 Sheet As-Sound Suppression
| 25***98 | Sheet As-Sound Suppression | 1 |
| 26***98 | Liner | 1 |
| 26***99 | Liner | 1 |
273-7802 Sheet As-Sound Suppression
| 23***65 | Step | 2 |
| 27***02 | Sheet As-Sound Suppression | 1 |
| 8T***38 | Bolt-Pipe As To Main Pump Suction Port | 4 |
262-2497 Sheet As-Sound Suppression
| 26***97 | Sheet As-Sound Suppression | 1 |
| 27***03 | Liner | 1 |
| 27***04 | Liner | 1 |
244-7912 Sheet As-Sound Suppression
| 23***99 | Insulation | 1 |
| 24***12 | Sheet As-Sound Suppression | 1 |
| 24***18 | Sheet As | 1 |
244-7917 Sheet As-Sound Suppression
| 18***80 | Seal; (8.8-cm) | 0 |
| 23***75 | Insulation | 1 |
| 24***16 | Insulation | 1 |
244-7922 Sheet As-Sound Suppression
| 24***22 | Sheet As-Sound Suppression | 1 |
| 25***02 | Liner | 1 |
| 25***03 | Liner | 1 |
236-3387 Sheet As-Sound Suppression
| 23***87 | Sheet As-Sound Suppression | 1 |
| 24***13 | Sheet As | 1 |
| 24***15 | Insulation | 1 |
308-8881 Step Gp
| 10***48 | Seal; (0.5-M Each) | 0 |
| 23***30 | Insulation | 1 |
| 25***01 | Insulation | 1 |
235-7764 Step Gp
| 23***64 | Step Group | 1 |
| 30***82 | Step As | 2 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 4 |
256-1670 Support As-Enclosure
| 09***14 | Ring, Back-Up | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 11***24 | Plate As. | 1 |
236-3329 Support As-Enclosure
| 23***29 | Support As-Enclosure | 1 |
| 25***71 | Insulation | 1 |
| 25***72 | Insulation | 1 |
Fuel System
174-9570 Filter Gp-Water Sep & Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2585 Injector Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 8 |
| 13***52 | Connector | 1 |
223-3046 Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 8 |
| 13***52 | Connector | 1 |
231-3046 Lines Gp-Fuel
| 18***99 | Connector As | 2 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
| 20***80 | Hose As | 1 |
191-0461 Lines Gp-Injector Hyd Pump
| 11***28 | Seal | 1 |
| 12***38 | Housing; (Receptacle) | 1 |
| 12***39 | Terminal; (Male) | 2 |
229-1859 Pump & Motor Gp-Refueling
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
| 22***59 | Pump & Motor Group-Refueling | 1 |
222-5900 Pump & Mtg Gp-Unit Inj Hyd
| 22***00 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
| 22***85 | Pump Group-Refueling | 1 |
| 23***70 | Wiring Group-Refueling Pump; -Refueling | 1 |
229-1784 Pump Ar-Fuel Transfer
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 32***85 | Injector Group-Fuel | 1 |
268-1839 Pump Gp-Fuel Injection
| 18***23 | Pump As-Fuel Priming | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
| 26***39 | Pump Group-Fuel Injection | 1 |
183-2824 Pump Gp-Fuel Priming
| 12***14 | Film-Instruction; (Refueling Pump) | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 4 |
229-1785 Pump Gp-Refueling
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
319-0677 Pump Gp-Unit Injector Hyd
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 31***77 | Pump Group-Unit Injector Hydraulic | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
223-3037 Tank & Mtg Gp-Fuel
| 22***37 | Tank & Mtg Group-Fuel | 1 |
| 32***24 | Tank Group-Fuel | 1 |
| 32***25 | Tank Group-Fuel | 1 |
327-3324 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
327-3325 Tank Gp-Fuel
| 32***25 | Tank Group-Fuel | 1 |
| 9X***37 | Seal-O-Ring | 1 |
327-3323 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
139-6873 Valve Gp-Fuel Bypass
| 13***73 | Valve Group-Fuel Bypass; -Filter | 1 |
| 26***92 | Nut; (M5x0.8-Thd) | 1 |
| 29***57 | Stop | 1 |
298-3147 Valve Gp-Fuel Shutoff
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 29***47 | Valve Group-Fuel Shutoff | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
Hydraulic System
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 13 |
164-6981 Accumulator Gp-Hydraulic -Charged
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 23***93 | Control Group-Hydraulic Pedal; -Work Tool | 1 |
| 24***20 | Film Group; -Operator Controls, Notice | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 23***95 | Control Group-Hydraulic Pedal; (Hydraulic Pedal) | 1 |
| 24***16 | Film Group; -Operator Controls, Notice | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 13***28 | Shim; (0.1-mm Thk) | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
256-0077 Actuator Gp-Pump -Driven
| 22***84 | Cylinder & Seal Group-Boom | 1 |
| 22***85 | Lines Group-Boom Cylinder | 1 |
| 25***77 | Actuator Group-Pump; -Driven | 1 |
256-0074 Actuator Gp-Pump -Drive
| 23***99 | Hub | 1 |
| 25***74 | Actuator Group-Pump; -Drive | 1 |
| 3E***95 | Flange | 1 |
173-3503 Base Gp-Oil Filter
| 17***03 | Base Group-Oil Filter; -Hydraulic | 1 |
| 22***84 | Cylinder & Seal Group-Boom | 1 |
| 22***86 | Lines Group-Boom Cylinder; -Rh | 1 |
255-5699 Control Ar-Auxiliary -System 3 Prime, 1-Way, 2-Pump
| 22***86 | Lines Group-Boom Cylinder; -Rh | 1 |
| 22***95 | Cylinder & Seal Group-Boom | 1 |
| 25***99 | Control Ar-Auxiliary; -System 3 Prime, 1-Way, 2-Pump | 1 |
255-5697 Control Ar-Auxiliary -System 2, Combined Function
| 22***85 | Lines Group-Boom Cylinder | 1 |
| 22***95 | Cylinder & Seal Group-Boom | 1 |
| 25***97 | Control Ar-Auxiliary; -System 2, Combined Function | 1 |
239-6598 Coupling Gp-Pump
| 22***80 | Cylinder & Seal Group-Bucket | 1 |
| 23***27 | Lines Group-Bucket Cylinder | 1 |
| 23***98 | Coupling Group-Pump | 1 |
225-4593 Cylinder & Lines Gp-Boom -Lh
| 22***88 | Cylinder & Seal Group-Stick | 1 |
| 22***89 | Lines Group-Stick Cylinder | 1 |
| 22***93 | Cylinder & Lines Group-Boom; -Lh | 1 |
225-4594 Cylinder & Lines Gp-Boom -Rh
| 22***89 | Lines Group-Stick Cylinder | 1 |
| 22***94 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 22***97 | Cylinder & Seal Group-Stick | 1 |
225-4583 Cylinder & Lines Gp-Boom -Rh
| 22***83 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 22***92 | Lines Group-Bucket Cylinder | 1 |
| 22***99 | Cylinder & Seal Group-Bucket | 1 |
225-4582 Cylinder & Lines Gp-Boom -Lh
| 22***82 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 22***91 | Cylinder & Seal Group-Bucket | 1 |
| 22***92 | Lines Group-Bucket Cylinder | 1 |
225-4579 Cylinder & Lines Gp-Bucket
| 22***79 | Cylinder & Lines Group-Bucket; -Db-Family | 1 |
| 22***89 | Lines Group-Stick Cylinder | 1 |
| 25***78 | Cylinder Group-Stick | 1 |
225-4590 Cylinder & Lines Gp-Bucket
| 09***31 | Ring; (Retaining) | 1 |
| 09***21 | Seal-O-Ring (Id=134.40mm) | 1 |
| 09***70 | Ring, Seal | 1 |
225-4598 Cylinder & Lines Gp-Bucket
| 09***31 | Ring; (Retaining) | 1 |
| 09***21 | Seal-O-Ring (Id=134.40mm) | 1 |
| 09***70 | Ring, Seal | 1 |
225-4587 Cylinder & Lines Gp-Stick
| 16***94 | Seal; (Id=79.85mm) | 2 |
| 16***96 | Seal; (Id=99.85mm) | 2 |
| 22***87 | Cylinder & Lines Group-Stick | 1 |
225-4596 Cylinder & Lines Gp-Stick
| 09***20 | Seal-O-Ring | 1 |
| 09***30 | Bearing-Sleeve | 1 |
| 09***10 | Setscrew-Socket; (M14x2x14-mm) | 1 |
259-0777 Cylinder & Lines Gp-Stick
| 09***20 | Seal-O-Ring | 1 |
| 09***30 | Bearing-Sleeve | 1 |
| 09***10 | Setscrew-Socket; (M14x2x14-mm) | 1 |
225-4584 Cylinder & Seal Gp-Boom
| 08***04 | Ring; (Retaining) | 2 |
| 08***05 | Ring; (Retaining) | 1 |
| 09***23 | Seal-O-Ring (Id=144.40mm) | 1 |
225-4595 Cylinder & Seal Gp-Boom
| 08***04 | Ring; (Retaining) | 2 |
| 08***05 | Ring; (Retaining) | 1 |
| 09***23 | Seal-O-Ring (Id=144.40mm) | 1 |
225-4591 Cylinder & Seal Gp-Bucket
| 08***04 | Ring; (Retaining) | 2 |
| 08***05 | Ring; (Retaining) | 1 |
| 09***23 | Seal-O-Ring (Id=144.40mm) | 1 |
225-4599 Cylinder & Seal Gp-Bucket
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***11 | Washer; (47.3x76x1-mm Thk) | 6 |
225-4580 Cylinder & Seal Gp-Bucket
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
| 11***60 | Bearing; (Sleeve) | 1 |
| 12***65 | Seal; (Id=104.00mm) | 1 |
225-4588 Cylinder & Seal Gp-Stick
| 17***74 | Motor & Mtg Group-Swing | 1 |
| 19***93 | Drive Group-Swing; -Without Motor | 1 |
| 22***88 | Cylinder & Seal Group-Stick | 1 |
225-4597 Cylinder & Seal Gp-Stick
| 09***55 | Pin | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 22***97 | Cylinder & Seal Group-Stick | 1 |
315-4442 Cylinder Gp-Bucket
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
259-0778 Cylinder Gp-Stick
| 12***03 | Seal-O-Ring (Id=185mm) | 2 |
| 12***34 | Valve As-Bypass | 1 |
| 15***84 | Seal-O-Ring | 1 |
191-2693 Drive Gp-Swing
| 09***81 | Seal-O-Ring | 1 |
| 13***23 | Seal-O-Ring | 4 |
| 13***24 | Screw; (M3x0.5x5-mm) | 8 |
199-4487 Drive Gp-Swing
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 19***87 | Drive Group-Swing; -With Motor | 1 |
| 28***95 | Head As-Filter | 1 |
171-9412 Fastener Gp-Swing & Final Dr
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 17***12 | Fastener Group-Swing & Final Dr | 1 |
| 23***57 | Pipe | 1 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 16***60 | Hose Group-Hydraulic; (Control Valve, Stick) | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 26***12 | Hose As | 1 |
| 28***94 | Filter Group-Oil; -Hydraulic, Case Drain | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 18***42 | Filter Group-Oil; -Hydraulic Return | 1 |
| 19***78 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***79 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
188-4140 Filter Gp-Oil -Hydraulic Return
| 14***65 | Tube As | 1 |
| 16***65 | Hose As | 1 |
| 18***40 | Filter Group-Oil; -Hydraulic, Return | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 14***64 | Tube As | 1 |
| 16***69 | Hose As | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
194-0179 Hose Gp-Hydraulic -Front
| 19***79 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 22***43 | Lines Group-Travel Motor; -Long Undercarriage | 1 |
| 22***48 | Lines Group-Pump; -Supply | 1 |
194-0174 Hose Gp-Hydraulic -Control Valve, Stick
| 19***74 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 19***82 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
194-0177 Hose Gp-Hydraulic -Control Valve, Stick
| 11***79 | Flange-Special | 1 |
| 16***73 | Hose As | 1 |
| 16***23 | Tube As | 1 |
194-0182 Hose Gp-Hydraulic
| 12***80 | Tube As | 1 |
| 14***82 | Tube As | 1 |
| 17***16 | Clamp-Half | 4 |
194-0181 Hose Gp-Hydraulic
| 17***16 | Clamp-Half | 4 |
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
194-0178 Hose Gp-Hydraulic -Control Valve, Stick
| 19***78 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 22***42 | Lines Group-Travel Motor | 1 |
| 22***48 | Lines Group-Pump; -Supply | 1 |
194-0180 Hose Gp-Hydraulic -Control Valve, Boom
| 11***77 | Hose As | 1 |
| 15***94 | Spacer | 4 |
| 15***98 | Plate | 2 |
194-0176 Hose Gp-Hydraulic
| 16***62 | Hose As | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
255-5708 Hydraulic Ar
| 18***93 | Clip | 5 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
255-5707 Hydraulic Ar
| 18***17 | Tube As | 1 |
| 18***18 | Tube As | 1 |
| 18***19 | Tube As | 1 |
237-3183 Lines Gp-Auxiliary Hydraulic -Reach
| 09***97 | Seal-O-Ring (Id=29.70mm) | 1 |
| 09***80 | Holder | 1 |
| 23***91 | Support As | 1 |
237-3181 Lines Gp-Auxiliary Hydraulic -Reach, Mass
| 09***20 | Holder | 2 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 09***92 | Support | 1 |
230-0486 Lines Gp-Auxiliary Hydraulic -Boom, High Pressure
| 09***20 | Holder | 2 |
| 09***97 | Seal-O-Ring (Id=29.70mm) | 2 |
| 09***92 | Support | 1 |
227-0550 Lines Gp-Boom -1-Piece Long Boom
| 11***78 | Support As | 1 |
| 11***79 | Support As | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
227-0551 Lines Gp-Boom -1-Piece Short Boom
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 8 |
| 14***67 | Clamp; (Hose) | 2 |
225-4586 Lines Gp-Boom Cylinder
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 4 |
| 10***03 | Bolt; (Socket Head) (M10x1.5x80mm) | 2 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 42 |
225-4585 Lines Gp-Boom Cylinder
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***50 | Clamp | 1 |
239-1627 Lines Gp-Bucket Cylinder
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
225-4592 Lines Gp-Bucket Cylinder
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
248-9831 Lines Gp-Control -Rear
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 6 |
| 23***23 | Support | 1 |
| 24***31 | Lines Group-Control; -Control Valve, Pump | 1 |
255-1760 Lines Gp-Front -System 3, 1-Way, 2-Pump
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
| 08***34 | Hose As | 1 |
245-5179 Lines Gp-Front -Attachment
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
245-5178 Lines Gp-Front -Boom Cylinder
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
255-1759 Lines Gp-Front -System 2, Combined Function
| 08***80 | Hose As (Nom 06, L=2550mm) | 1 |
| 10***71 | Hose As (Nom 06, L=2430mm) | 1 |
| 10***03 | Hose As (Nom 06, L=2600mm) | 1 |
248-9833 Lines Gp-Hydraulic Oil Cooler
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
| 08***34 | Hose As | 1 |
255-1800 Lines Gp-Pilot -Pedal, Rh
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
| 14***58 | Elbow As | 1 |
255-1659 Lines Gp-Pilot -Heavy Lift
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***84 | Guard | 1 |
| 10***74 | Hose As (Nom 06, L=2200mm) | 1 |
255-1802 Lines Gp-Pilot -Pedal Controls
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
| 25***02 | Lines Group-Pilot; -Pedal Controls | 1 |
248-9825 Lines Gp-Pilot -Joystick, Pedals
| 08***03 | Hose As (Nom 06, L=2300mm) | 1 |
| 10***68 | Hose As (Nom 06, L=2700mm) | 1 |
| 10***83 | Hose As; (Nom 06, L=2150mm) | 1 |
248-9826 Lines Gp-Pilot -Travel
| 08***02 | Hose As. | 1 |
| 08***66 | Hose As | 1 |
| 08***72 | Hose As (Nom 06, L=1000mm) | 1 |
248-9827 Lines Gp-Pilot -Control Valve, Pump
| 08***66 | Hose As | 1 |
| 12***08 | Guard | 1 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 4 |
255-1661 Lines Gp-Pilot -System 3 Prime, 1-Way, 2-Pump
| 11***03 | Bolt-Socket Head; (M16x2x40-mm) | 4 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 2 |
248-9829 Lines Gp-Pilot -Pump
| 08***02 | Hose As. | 2 |
| 08***85 | Hose As (Nom 06, L=350mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
255-1803 Lines Gp-Pilot -Combined Fctn, 2-Hyd Pedals
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
| 25***03 | Lines Group-Pilot; -Combined Fctn, 2-Hydraulic Pedals | 1 |
| 5I***89 | Block | 1 |
255-1656 Lines Gp-Pilot -Alt Pattern Control, 4-Way
| 08***02 | Hose As. | 2 |
| 08***85 | Hose As (Nom 06, L=350mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
227-0548 Lines Gp-Pump -Supply
| 09***00 | Seal-O-Ring (Id=33.70mm) | 1 |
| 09***47 | Holder | 1 |
| 12***14 | Support | 1 |
248-9830 Lines Gp-Return
| 10***18 | Grommet | 4 |
| 10***33 | Hose As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
196-0536 Lines Gp-Stick
| 10***18 | Grommet | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
196-0537 Lines Gp-Stick
| 19***37 | Lines Group-Stick | 1 |
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
196-0541 Lines Gp-Stick
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***41 | Lines Group-Stick | 1 |
| 19***96 | Valve-Check | 1 |
225-4589 Lines Gp-Stick Cylinder
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
227-0543 Lines Gp-Travel Motor
| 22***43 | Lines Group-Travel Motor; -Long Undercarriage | 1 |
| 33***71 | Motor Group-Swing | 1 |
| 6V***04 | Circlip - External | 1 |
227-0542 Lines Gp-Travel Motor
| 17***75 | Motor Group-Swing | 1 |
| 22***42 | Lines Group-Travel Motor | 1 |
| 6V***04 | Circlip - External | 1 |
239-8697 Manifold Gp-Control
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 18***75 | Motor Group-Swing | 1 |
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
239-8998 Manifold Gp-Control
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
215-5037 Manifold Gp-Control -Pilot Oil
| 09***07 | Bolt; (M16x2x120-mm) | 3 |
| 09***85 | Seal - O-Ring (179.3 mm Id) | 1 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
179-9774 Motor & Mtg Gp-Swing
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
204-2674 Motor & Mtg Gp-Travel
| 08***42 | Valve | 1 |
| 08***43 | Stopper | 2 |
| 08***57 | Piston | 2 |
334-9971 Motor Gp-Swing
| 23***98 | Coupling Group-Pump | 1 |
| 27***59 | Pump Group-Main Hydraulic | 1 |
| 33***71 | Motor Group-Swing | 1 |
179-9775 Motor Gp-Swing
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 8 |
| 17***75 | Motor Group-Swing | 1 |
| 19***11 | Washer; (17x40x8-mm Thk) | 4 |
188-4175 Motor Gp-Swing
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***48 | Plug Group-Control Valve | 1 |
334-9978 Motor Gp-Swing
| 09***75 | Pin, Roller | 7 |
| 09***82 | Plug, Tapered | 16 |
| 09***46 | Ring; (Retaining) | 2 |
215-9952 Motor Gp-Travel
| 09***39 | Spring | 1 |
| 12***84 | Rod | 1 |
| 20***00 | Screen As; (Hydraulic Tank) | 1 |
260-7868 Mounting Gp-Main Control Valve
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 15***82 | Seal | 5 |
6e-4816 Plug Gp-Control Valve
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
233-1115 Pump & Mtg Gp-Main Hydraulic
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 6 |
| 22***66 | Tank & Filter Group-Hydraulic | 1 |
| 23***15 | Pump & Mtg Group-Main Hydraulic | 1 |
272-6959 Pump Gp-Main Hydraulic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 1 |
259-0922 Screen Gp-Hydraulic
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***22 | Screen Group-Hydraulic; -Tank | 1 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
234-4440 Swivel Gp
| 23***40 | Swivel Group | 1 |
| 24***92 | Film Group; -Alt Pattern Control, Warning | 1 |
| 25***56 | Lines Group-Pilot; -Alt Pattern Control, 4-Way | 1 |
227-0566 Tank & Filter Gp-Hydraulic
| 22***66 | Tank & Filter Group-Hydraulic | 1 |
| 25***80 | Valve Group-Swing Cushion; -Fine Swing | 1 |
227-0565 Tank & Mtg Gp-Hydraulic
| 09***47 | Seal-O-Ring | 1 |
| 17***09 | Body | 1 |
| 17***13 | Valve As | 1 |
289-5564 Tank Gp-Hydraulic
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
255-5713 Valve & Mtg Gp-Control -Auxiliary
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
255-5725 Valve Ar-Alt Pattern Control -4-Way
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 25***25 | Valve Ar-Alt Pattern Control; -4-Way | 1 |
247-7451 Valve Ar-Swing
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
297-0370 Valve Gp-Check
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
173-4672 Valve Gp-Check -Oil Cooler Bypass
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
310-0086 Valve Gp-Control
| 30***66 | Handle | 1 |
| 31***86 | Valve Group-Control; -Without Covers, Housings | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
255-5653 Valve Gp-Control
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
259-7432 Valve Gp-Control
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
239-8825 Valve Gp-Control -Without Covers, Housings
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
310-0085 Valve Gp-Control
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***32 | Valve Group-Control; -Heavy Lift-Lh | 1 |
259-7378 Valve Gp-Control -Auxiliary
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
244-8400 Valve Gp-Control -Without Covers, Housings
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
255-5683 Valve Gp-Load Control -Boom Drift Red, Line Relief
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
255-5680 Valve Gp-Load Control -Stick Drift Red, Line Relief
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 08***09 | Bellows | 2 |
259-7424 Valve Gp-Main Control -Heavy Lift
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
255-5651 Valve Gp-Main Control
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 2 |
277-0954 Valve Gp-Manual -Auxiliary, Shutoff
| 10***89 | Seal-O-Ring | 2 |
| 10***73 | Seal-O-Ring | 2 |
| 14***74 | Valve | 1 |
270-5947 Valve Gp-Pilot -Travel
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 10***65 | Body-Valve | 1 |
297-0529 Valve Gp-Pilot -Joystick
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 10***53 | Body-Valve | 1 |
310-0414 Valve Gp-Pilot -Travel
| 10***67 | Valve Group-Relief; -Negative Flow Control | 1 |
| 15***39 | Cover | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
206-3336 Valve Gp-Pilot
| 14***74 | Valve | 1 |
| 14***77 | Pin | 1 |
| 15***86 | Spring | 1 |
310-0210 Valve Gp-Pressure Reducing -Boom, Swing Priority
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***85 | Ring; (Back Up) | 1 |
| 31***10 | Valve Group-Pressure Reducing; -Boom, Swing Priority | 1 |
323-7898 Valve Gp-Priority
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***13 | Body As | 1 |
| 16***63 | Retainer | 1 |
153-5295 Valve Gp-Priority -Swing
| 15***95 | Valve Group-Priority; (Negative Flow) | 1 |
| 31***94 | Valve Group-Relief, Male Union Elbow | 1 |
310-0393 Valve Gp-Relief -Main, Heavy Lift
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
310-0394 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
255-5661 Valve Gp-Relief -Line
| 12***31 | Body-Valve | 1 |
| 12***52 | Connector | 2 |
| 25***61 | Valve Group-Relief; -Line | 1 |
310-0390 Valve Gp-Relief -Main
| 09***78 | Seal-O-Ring (Id=9.80mm) | 7 |
| 10***79 | Plug | 7 |
| 16***64 | Seat | 6 |
153-5313 Valve Gp-Relief -Negative Flow Control
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
109-5152 Valve Gp-Relief -Negative Flow Control
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
109-2667 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
184-3830 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
204-2755 Valve Gp-Relief
| 00***03 | Ball | 1 |
| 08***79 | Grip | 1 |
| 08***80 | Lever | 1 |
255-5662 Valve Gp-Relief -Line
| 12***31 | Body-Valve | 1 |
| 12***52 | Connector | 1 |
| 17***30 | Connector As | 2 |
173-3536 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
177-2653 Valve Gp-Relief -Line
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
165-9470 Valve Gp-Selector
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
123-2430 Valve Gp-Shuttle
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 12***30 | Valve Group-Shuttle; (Work Tool) | 1 |
| 7I***84 | Plug | 4 |
164-6979 Valve Gp-Shuttle
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 16***79 | Valve Group-Shuttle | 1 |
| 17***98 | Valve Group-Shuttle | 2 |
185-0462 Valve Gp-Shuttle
| 09***76 | Seal-O-Ring | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
| 17***36 | Valve Group-Relief; -Cushion Crossover | 2 |
121-6303 Valve Gp-Solenoid
| 09***45 | Washer; (28.5x37x2-mm Thk) | 2 |
| 12***03 | Valve Group-Solenoid; -Variable Adjustable Boom | 1 |
| 20***55 | Valve Group-Relief; -Crossover | 2 |
165-9549 Valve Gp-Solenoid
| 16***49 | Valve Group-Solenoid | 1 |
| 18***16 | Lines Group-Grease; -1-Piece Long Boom | 1 |
| 22***82 | Cylinder & Lines Group-Boom; -Lh | 1 |
171-0188 Valve Gp-Solenoid
| 17***88 | Valve Group-Solenoid; -Neg Flow Cont, Propn Red Valve | 1 |
| 18***16 | Lines Group-Grease; -1-Piece Long Boom | 1 |
| 22***93 | Cylinder & Lines Group-Boom; -Lh | 1 |
121-1491 Valve Gp-Solenoid
| 09***76 | Seal-O-Ring | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
111-9916 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 15***85 | Valve Group-Swing Cushion; (Fine Swing) | 1 |
259-0680 Valve Gp-Swing Cushion
| 18***43 | Lines Group-Grease; -1-Piece Short Boom | 1 |
| 22***82 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 22***83 | Cylinder & Lines Group-Boom; -Rh | 1 |
158-9085 Valve Gp-Swing Cushion
| 15***85 | Valve Group-Swing Cushion; (Fine Swing) | 1 |
| 18***16 | Lines Group-Grease; -1-Piece Long Boom | 1 |
| 22***82 | Cylinder & Lines Group-Boom; -Lh | 1 |
322-8716 Valve Gp-Swing Cushion -Fine Swing
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
204-2819 Valve Gp-Travel Counterbalance
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
Implements
229-1760 Boom Ar-1 Piece Long
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 11***78 | Hose As | 1 |
| 12***60 | Hose As | 1 |
229-1754 Boom Ar-1 Piece Long
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
229-1758 Boom Ar-1 Piece Long -High Temperature
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 11***77 | Hose As | 1 |
| 12***24 | Hose As | 1 |
229-1757 Boom Ar-1 Piece Short
| 22***90 | Cylinder & Lines Group-Bucket | 1 |
| 22***57 | Boom Ar-1 Piece Short | 1 |
| 25***97 | Linkage Group-Bucket; -Cb2-Family | 1 |
235-7614 Boom Gp-1 Piece
| 22***79 | Cylinder & Lines Group-Bucket; -Db-Family | 1 |
| 23***14 | Boom Group-1 Piece | 1 |
| 23***15 | Linkage Group-Bucket; -Db-Family, With Lifting Eye | 1 |
228-5522 Boom Gp-Reach -Heavy-Duty
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
| 09***45 | Seal-O-Ring | 2 |
| 09***49 | Seal-O-Ring (Id=175.00mm) | 2 |
228-5521 Boom Gp-Reach
| 22***98 | Cylinder & Lines Group-Bucket | 1 |
| 22***21 | Boom Group-Reach | 1 |
| 25***97 | Linkage Group-Bucket; -Cb2-Family | 1 |
184-5543 Lines Gp-Grease
| 18***43 | Lines Group-Grease; -1-Piece Short Boom | 1 |
| 19***36 | Lines Group-Stick | 1 |
| 22***26 | Stick Group-Hoe; -Cb-Family | 1 |
180-7816 Lines Gp-Grease
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***45 | Seal-O-Ring | 4 |
| 16***87 | Shim; (2-mm Thk) | 2 |
247-7383 Linkage Ar-Bucket -High Temperature, With Lifting Eye
| 19***36 | Lines Group-Stick | 1 |
| 24***83 | Linkage Ar-Bucket; -High Temperature, With Lifting Eye | 1 |
| 27***70 | Stick Group-Hoe; -Heavy-Duty, Cb2-Family | 1 |
247-7331 Linkage Ar-Bucket
| 19***41 | Lines Group-Stick | 1 |
| 23***19 | Stick Group-Hoe; -Db-Family | 1 |
| 24***31 | Linkage Ar-Bucket; -Cb2-Family, With Lifting Eye | 1 |
247-7333 Linkage Ar-Bucket -Db-Family
| 19***37 | Lines Group-Stick | 1 |
| 22***25 | Stick Group-Hoe; -Heavy-Duty, Cb-Family | 1 |
| 24***33 | Linkage Ar-Bucket; -Db-Family, With Lifting Eye | 1 |
236-8415 Linkage Gp-Bucket -Db-Family, With Lifting Eye
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
251-2597 Linkage Gp-Bucket -Cb2-Family
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
229-1762 Stick Ar-Hoe -Cb-Family
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 2 |
| 16***86 | Shim; (2-mm Thk) | 2 |
229-1770 Stick Ar-Hoe -Heavy-Duty, Cb-Family
| 08***74 | Pin | 1 |
| 08***75 | Shim (0.5mm Thick) | 4 |
| 08***76 | Shim (1.0mm Thick) | 6 |
264-8667 Stick Ar-Hoe -Heavy-Duty, Cb2-Family
| 13***51 | Plate | 1 |
| 25***57 | Flange | 1 |
| 26***67 | Stick Ar-Hoe; -Heavy-Duty, Cb2-Family | 1 |
229-1769 Stick Ar-Hoe -Db-Family
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
235-7619 Stick Gp-Hoe -Db-Family
| 23***19 | Stick Group-Hoe; -Db-Family | 1 |
| 25***18 | Adjuster Group-Bucket; -Cb-Family | 1 |
| 26***41 | Plate-Reinforcement | 1 |
273-6770 Stick Gp-Hoe -Heavy-Duty, Cb2-Family
| 12***89 | Edge As | 1 |
| 25***18 | Adjuster Group-Bucket; -Cb-Family | 1 |
| 26***40 | Plate-Reinforcement | 1 |
228-5526 Stick Gp-Hoe -Cb-Family
| 22***26 | Stick Group-Hoe; -Cb-Family | 1 |
| 25***18 | Adjuster Group-Bucket; -Cb-Family | 1 |
| 28***54 | Bucket As-Heavy Duty; -Cb-Family | 1 |
228-5525 Stick Gp-Hoe -Heavy-Duty, Cb-Family
| 22***25 | Stick Group-Hoe; -Heavy-Duty, Cb-Family | 1 |
| 22***93 | Plate-Wear | 2 |
| 22***94 | Plate-Wear | 1 |
Lubrication System
191-0523 Adapter Gp-Oil Line -Fuel Injection Pump
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 19***22 | Adapter | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
222-5946 Breather Gp
| 14***54 | Bolt; (M8x1.25x105-mm) | 1 |
| 16***10 | Breather As; (Crankcase) | 1 |
| 22***46 | Breather Group; -Crankcase | 1 |
233-1123 Mounting Gp-Lines
| 20***97 | Pump Group-Engine Oil | 1 |
| 23***23 | Filter & Mtg Group-Engine Oil; -Engine Oil Filter | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
231-7266 Filter Gp-Engine Oil
| 12***07 | Base | 1 |
| 14***29 | Connector As | 1 |
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
254-7342 Fumes Disposal Gp
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 09***29 | Connector | 2 |
| 22***43 | Hose; (Fumes Disposal, Lower) | 1 |
177-4814 Gauge Gp-Oil Level (Dipstick) -Engine
| 13***26 | Bracket | 1 |
| 17***79 | Gauge As-Oil Level; (Engine) | 1 |
| 17***14 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
7c-2475 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 4 |
171-9114 Lines Gp-Engine Oil Drain
| 09***88 | Clamp; (Hose) | 1 |
| 17***14 | Lines Group-Engine Oil Drain | 1 |
| 20***83 | Valve As; (Oil Drain) | 1 |
280-4371 Lines Gp-Turbocharger Oil
| 11***42 | Adapter | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 19***19 | Gasket; (Coated Metal) | 1 |
192-2981 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 19***81 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
200-4497 Pump Gp-Engine Oil
| 20***97 | Pump Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
Machine Arrangement
314-3652 Chassis Ar
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
| 22***22 | Counterweight Group | 1 |
| 22***37 | Tank & Mtg Group-Fuel | 1 |
314-3653 Chassis Ar
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
| 22***22 | Counterweight Group | 1 |
| 22***37 | Tank & Mtg Group-Fuel | 1 |
314-3642 General Ar
| 17***10 | Power Train Ar | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
| 22***75 | Electronics Group-Machine | 1 |
314-3641 General Ar
| 17***10 | Power Train Ar | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
| 22***75 | Electronics Group-Machine | 1 |
298-4288 Special Ar -China
| 29***81 | Film Group | 1 |
| 29***88 | Special Ar; -China | 1 |
| 30***95 | Handle As, Mounting Spacer, Spacer, Mounting | 1 |
298-4286 Special Ar -China
| 29***81 | Film Group | 1 |
| 29***86 | Special Ar; -China | 1 |
| 30***95 | Handle As, Mounting Spacer, Spacer, Mounting | 1 |
247-7392 Special Ar-Heavy Lift
| 24***92 | Special Ar-Heavy Lift | 1 |
| 25***59 | Lines Group-Pilot; -Heavy Lift | 1 |
| 25***37 | Fastener Group-Wiring Harness; -Heavy Lift | 1 |
Operator Station
245-7896 Adjuster Gp-Seat -Lower Slide
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
229-9080 Air Conditioner & Mounting Gp
| 22***80 | Air Conditioner & Mounting Group | 1 |
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
229-9079 Air Conditioner Ar
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 16***74 | Louver As-Vent | 2 |
| 22***79 | Air Conditioner Ar | 1 |
316-8812 Air Conditioner Gp
| 13***99 | Hatch Group; (Roof) | 1 |
| 13***00 | Door Group-Cab | 1 |
| 13***01 | Window Group-Cab; -Front, Upper | 1 |
316-8917 Air Conditioner Gp
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 13 |
| 12***36 | Screw; (Truss Head) (M6x1.0x16mm) | 1 |
| 15***56 | Rail | 1 |
259-7346 Armrest Gp -Rh
| 08***52 | Washer | 2 |
| 09***23 | Screw-Machine; (M6x1x6-mm) | 3 |
| 09***07 | Washer-Hard; (10.2x30x3.2-mm Thk) | 2 |
259-7347 Armrest Gp -Lh
| 08***52 | Washer | 2 |
| 09***23 | Screw-Machine; (M6x1x6-mm) | 3 |
| 09***07 | Washer-Hard; (10.2x30x3.2-mm Thk) | 2 |
346-7375 Bracket Gp-Mirror
| 13***89 | Clip; (Ladder) | 1 |
| 25***92 | Bolt; (M8x1.25x80-mm) | 2 |
| 30***25 | Compressor & Mtg Group-Refrig | 1 |
259-7295 Bracket Gp-Mirror
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
| 12***38 | Seal-O-Ring (Id=6.7mm); (Id=6.70mm) | 1 |
| 24***37 | Valve As-Expansion | 1 |
235-8908 Cab Gp -Interior
| 16***32 | Motor As; (Hydraulic Fan) | 1 |
| 16***34 | Resistor As; (Hydraulic Fan) | 1 |
| 16***99 | Nut-Flange; (M5x0.8-Thd) | 1 |
229-9098 Cab Gp
| 22***98 | Cab Group | 1 |
| 27***15 | Condenser Group-Refrigerant | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
235-8910 Cab Gp -Exterior
| 10***66 | Spacer; (6.6x11x6-mm Thk) | 8 |
| 12***17 | Guard | 2 |
| 17***16 | Grommet | 2 |
229-9099 Cab Gp
| 22***99 | Cab Group | 1 |
| 33***69 | Condenser Group-Refrigerant | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
245-7836 Coil Gp-Evaporator
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
276-3815 Compressor Gp-Refrigerant
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 23***79 | Nut-Speed | 6 |
245-7909 Condenser & Mtg Gp-Refrigerant
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
| 12***10 | Lever | 1 |
334-6569 Condenser Gp-Refrigerant
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***11 | Pedal-Rubber; (Rh) | 1 |
| 12***73 | Pin | 1 |
273-5315 Condenser Gp-Refrigerant
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
| 12***10 | Lever | 1 |
259-7349 Console Gp-Operator -Lh
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
245-7922 Console Gp-Operator
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 4 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***11 | Pedal-Rubber; (Rh) | 1 |
259-7348 Console Gp-Operator -Rh
| 23***69 | Control Group-Handle; -Joystick, Lh | 1 |
| 25***48 | Console Group-Operator; -Rh | 1 |
| 29***29 | Valve Group-Pilot; -Joystick | 1 |
310-0078 Control & Mtg Gp-Joystick
| 23***99 | Cover As | 1 |
| 23***02 | Cover-Access; (Fuse-Rear Panel) | 1 |
| 23***93 | Fastener | 2 |
235-8970 Control Gp-Handle -Rh
| 09***22 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 09***84 | Nut-Spring | 2 |
| 10***99 | Screw As; (M6x1x16-mm) | 2 |
235-8969 Control Gp-Handle -Lh
| 23***69 | Control Group-Handle; -Joystick, Lh | 1 |
239-8695 Control Gp-Hydraulic Pedal
| 23***95 | Control Group-Hydraulic Pedal; (Hydraulic Pedal) | 1 |
239-8693 Control Gp-Hydraulic Pedal
| 10***99 | Screw As; (M6x1x16-mm) | 2 |
| 17***96 | Clip | 5 |
| 23***76 | Duct As; (Fresh Air, Upper) | 1 |
297-0532 Control Gp-Joystick -Rh
| 29***32 | Control Group-Joystick; -Rh | 1 |
297-0533 Control Gp-Joystick -Lh
| 29***33 | Control Group-Joystick; -Lh | 1 |
170-9497 Control Gp-Pilot Operated Hyd
| 09***06 | Spring As; (Gas) | 2 |
| 10***69 | Bolt As; (M8x1.25x16-mm) | 4 |
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
234-6501 Cover Gp-Cab -Rear
| 08***49 | Packing | 2 |
| 10***81 | Screw-Truss Head | 4 |
| 16***94 | Catch | 1 |
234-6500 Cover Gp-Storage
| 23***00 | Cover Group-Storage; -Cab, Rear | 1 |
| 29***59 | Horn Group-Electric | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
139-7100 Door Gp-Cab
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 13***89 | Clip; (Ladder) | 1 |
229-9082 Duct Gp-Cab Air
| 18***00 | Screw-Tapping | 6 |
| 19***66 | Relay; (Compressor Clutch) | 4 |
| 22***82 | Duct Group-Cab Air | 1 |
240-5071 Floor Mat
| 24***71 | Floor Mat | 1 |
| 24***95 | Kit-Clip; (Includes 28-Clips) | 1 |
| 32***46 | Kit-Cylinder; (Dampener)(Dampener) | 1 |
245-7794 Floor Mat
| 15***42 | Lever As | 1 |
| 16***64 | Bracket | 1 |
| 17***41 | Pin | 1 |
240-5073 Floor Mat
| 24***73 | Floor Mat | 1 |
| 24***95 | Kit-Clip; (Includes 28-Clips) | 1 |
| 32***46 | Kit-Cylinder; (Dampener)(Dampener) | 1 |
139-7099 Hatch Gp-Roof
| 10***73 | Clip | 5 |
| 10***78 | Guard (25cm); (40-cm) | 0 |
| 12***98 | Bracket Assem. | 1 |
189-2849 Hatch Gp-Roof
| 09***45 | Cable; (Lanyard) | 1 |
| 18***49 | Hatch Group-Roof; (Roof) | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
267-8071 Horn Gp-Electric
| 13***70 | Mirror | 1 |
| 16***65 | Arm As; (Mirror Support) | 1 |
| 17***15 | Plug | 4 |
291-7559 Horn Gp-Electric
| 13***70 | Mirror | 1 |
| 16***65 | Arm As; (Mirror Support) | 1 |
| 29***59 | Horn Group-Electric | 1 |
245-7812 Housing Gp-Air Conditioner
| 24***12 | Housing Group-Air Conditioner; -Inlet Air | 1 |
| 8T***69 | Bolt-Socket Hd; (M6 X 1.0 X 20) | 2 |
| 9X***56 | Washer; (6.6x12x2-mm Thk) | 2 |
251-0538 Radio Gp
| 25***38 | Installation Group-Radio | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
327-6645 Kit-Seat Suspension -Mechanical
| 32***45 | Kit-Seat Suspension; -Mechanical | 1 |
| 32***82 | Monitor Group-Operator | 1 |
| 9X***46 | Screw-Truss Head (M6x1x35mm); (M6x1x35-mm) | 3 |
333-4157 Kit-Seat Suspension -Air
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 17 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
| 24***95 | Receptacle As-Connector; (12-Pin) | 1 |
164-0528 Lever Gp-Cab Door
| 16***28 | Lever Group-Cab Door | 1 |
| 32***82 | Monitor Group-Operator | 1 |
| 34***10 | Software Group-Monitor | 1 |
229-9071 Lines Gp-Air Conditioner
| 22***71 | Lines Group-Air Conditioner | 1 |
| 23***62 | Mount As | 4 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 16 |
7y-0059 Literature Gp
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 22***72 | Control & Mtg Group-Machine | 1 |
327-6550 Mirror Gp-Rear View
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 32***50 | Mirror Group-Rear View | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
142-3836 Mirror Gp-Rear View
| 13***65 | Grommet | 1 |
| 13***66 | Grommet | 1 |
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
221-8813 Monitor & Mtg Gp-Operator
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 4 |
| 22***13 | Monitor & Mtg Group-Operator | 1 |
349-5408 Monitor Gp-Operator
| 32***07 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 34***08 | Monitor Group-Operator | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
327-7482 Monitor Gp-Operator
| 31***87 | Bracket | 2 |
| 32***07 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 32***82 | Monitor Group-Operator | 1 |
245-7811 Mounting Gp-Platform
| 24***11 | Mounting Group-Platform | 1 |
| 31***87 | Bracket | 2 |
| 32***09 | Seat Group-Suspension; -High Back, With Heater | 1 |
229-9072 Operator Ar
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 4 |
| 22***72 | Operator Ar | 1 |
229-9078 Platform Gp-Operator
| 22***78 | Platform Group-Operator | 1 |
| 27***46 | Seat Belt Group; -Retractable, 46-mm | 1 |
327-6503 Seat & Mounting Gp -High Back, With Heater
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
240-5003 Seat & Mounting Gp
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 32***41 | Seat Belt Group; (Retractable, 43-mm) | 1 |
327-6501 Seat & Mounting Gp -High Back, Tilt
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 31***87 | Bracket | 2 |
| 32***01 | Seat & Mounting Group; -High Back, Tilt | 1 |
273-5446 Seat Belt Gp -Retractable, 46-Mm
| 27***46 | Seat Belt Group; -Retractable, 46-mm | 1 |
| 31***87 | Bracket | 2 |
| 32***13 | Seat Group; -High Back, With Heater | 1 |
240-5037 Seat Belt Gp -Retractable, 46-Mm
| 24***37 | Seat Belt Group; -Retractable, 46-mm | 1 |
| 31***87 | Bracket | 2 |
| 32***12 | Seat Group; -High Back, Tilt | 1 |
305-0467 Seat Belt Gp -Retractable
| 30***67 | Seat Belt Group; -Retractable, 43-mm | 1 |
| 32***38 | Support As-Seat | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
327-6513 Seat Gp -High Back, With Heater
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***80 | Cylinder-Damper | 1 |
| 24***97 | Plate | 8 |
327-6512 Seat Gp -High Back, Tilt
| 24***68 | Cover As | 1 |
| 24***89 | Adjuster Group-Seat; -Upper Slide | 1 |
| 24***90 | Bracket Group-Mounting; -Suspension Seat | 1 |
229-9093 Seat Gp -High Back, With Heater
| 14***21 | Kit-Clip; (Seat) | 1 |
| 22***93 | Seat Group; -High Back, With Heater | 1 |
| 24***68 | Cover As | 1 |
327-6509 Seat Gp-Suspension -High Back, With Heater
| 16***39 | Bracket As | 1 |
| 21***27 | Plate | 1 |
| 21***28 | Plate | 1 |
229-9089 Seat Gp-Suspension
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***48 | Absorber As-Shock; (Sideshift) | 1 |
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
240-5065 Seat Gp-Suspension -Air Susp, High Back, With Htr
| 24***65 | Seat Group-Suspension; -Air Susp, High Back, With Htr | 1 |
| 32***44 | Kit-Bracket; (Console Raise, Lower) | 1 |
| 32***45 | Kit-Seat Suspension; -Mechanical | 1 |
240-5064 Seat & Mounting Gp -Air Susp, High Back, With Htr
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
| 24***64 | Spring; Replaces 421310a1, Spring, Seat Group-Suspension; -Air Susp, High Back, With Htr | 1 |
327-6507 Seat Gp-Suspension -High Back, Tilt
| 32***07 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 32***44 | Kit-Bracket; (Console Raise, Lower) | 1 |
| 32***48 | Kit-Adjuster; (Seat Position) | 1 |
327-6523 Support Gp-Seat
| 14***95 | Hose; (650-cm Each) | 0 |
| 16***95 | Strap; (Cable) | 2 |
| 17***31 | Tank As-Window Washer | 1 |
327-6520 Suspension Gp-Seat -Mechanical
| 09***29 | Ring-Key | 1 |
| 15***90 | Glass; (Lh) | 1 |
| 15***69 | Glass | 1 |
229-9077 Suspension Gp-Seat
| 08***37 | Nozzle As | 1 |
| 10***26 | Adapter As | 1 |
| 10***27 | Packing | 1 |
327-6521 Suspension Gp-Seat -Air
| 08***44 | Latch Group-Front Window | 2 |
| 08***47 | Retainer | 1 |
| 08***48 | Screw-Tapping | 2 |
240-5063 Suspension Gp-Seat -Air
| 09***23 | Screw-Machine; (M6x1x6-mm) | 2 |
| 10***00 | Screw As; (M6x1x20-mm) | 2 |
| 11***06 | Switch; (Window Lower Limit) | 1 |
245-7892 Suspension Gp-Seat
| 12***66 | Stopper | 1 |
| 14***91 | Packing | 2 |
| 14***92 | Retainer | 2 |
273-5384 Suspension Gp-Seat -Air
| 13***19 | Ring | 2 |
| 15***73 | Glass; (Lower Front) | 1 |
| 15***31 | Stopper | 2 |
161-3751 Visor Gp-Cab
| 12***66 | Switch As-Roller | 1 |
| 15***46 | Bracket | 1 |
| 15***47 | Window Group-Cab; -Front, Lower | 1 |
229-9088 Washer Gp-Window -Lower
| 12***53 | Washer; (20.5x30x2-mm Thk) | 1 |
| 15***42 | Relay As; (Upper)(Wiper) | 1 |
| 16***68 | Arm As-Wiper | 1 |
229-9070 Washer Gp-Window
| 22***70 | Washer Group-Window | 1 |
| 22***87 | Wiper & Washer Group-Window; -Lower | 1 |
| 22***88 | Washer Group-Window; -Lower | 1 |
156-6647 Window Gp-Cab
| 11***54 | Film-Notice; (Hydraulic Hammer Operation) | 1 |
| 15***47 | Window Group-Cab; -Front, Lower | 1 |
| 26***45 | Film-Instruction; (Operator Control Pedals) | 1 |
176-1958 Window Gp-Cab -Front, Lower
| 17***58 | Window Group-Cab; -Front, Lower | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***45 | Film-Instruction; (Operator Control Pedals) | 1 |
235-8909 Window Gp-Cab -Side, Rear
| 23***09 | Window Group-Cab; -Side, Rear | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***46 | Film-Instruction; (Operator Control Pedals) | 1 |
139-7101 Window Gp-Cab -Front, Upper
| 11***54 | Film-Notice; (Hydraulic Hammer Operation) | 1 |
| 13***01 | Window Group-Cab; -Front, Upper | 1 |
| 26***46 | Film-Instruction; (Operator Control Pedals) | 1 |
151-6792 Window Gp-Door
| 15***92 | Window Group-Door; (Door) | 1 |
| 17***88 | Film-Information; (Operator Controls, Read Omm)(Quick Changer) | 1 |
| 21***31 | Plate-Instruction; (Operator Controls, Read Omm)(Operator Controls) | 1 |
229-9087 Wiper & Washer Gp-Window -Lower
| 22***87 | Wiper & Washer Group-Window; -Lower | 1 |
| 30***72 | Film-Warning; (Explosion Hazard, Read Omm) | 1 |
229-9086 Wiper Ar-Window
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
| 22***86 | Wiper Ar-Window; -Lower | 1 |
| 29***82 | Film-Warning; (Crush Hazard) | 2 |
234-6594 Wiper Gp-Window -Upper
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 16***70 | Film; (No Step) | 1 |
Power Train
267-6796 Drive Gp-Final -Without Motor
| 20***74 | Motor & Mtg Group-Travel | 1 |
| 26***96 | Drive Group-Final; -Without Motor | 2 |
267-6877 Final Drive Gp -With Motor
| 17***12 | Fastener Group-Swing & Final Dr | 1 |
| 17***94 | Sprocket Group | 2 |
| 19***87 | Drive Group-Swing; -With Motor | 1 |
171-9410 Power Train Ar
| 17***10 | Power Train Ar | 1 |
| 6Y***98 | Sprocket - Track (21 Teeth) | 1 |
| 8T***82 | Washer; (Hard) (22x35x3.5mm Thk) | 18 |
179-2994 Sprocket Gp
| 13***77 | Bolt As; (M12x1.75x35-mm) | 4 |
| 17***94 | Sprocket Group | 1 |
| 22***41 | Box Group-Storage | 1 |
Service Equipment And Supplies
247-7416 Film Gp -Operator Controls, Notice
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 16***70 | Film; (No Step) | 1 |
298-4258 Film Gp -Fuel Transfer Pump
| 29***58 | Film Group; -Fuel Transfer Pump | 1 |
247-7492 Film Gp -Alt Pattern Control, Warning
| 24***92 | Film Group; -Alt Pattern Control, Warning | 1 |
247-7420 Film Gp -Operator Controls, Notice
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 16***70 | Film; (No Step) | 1 |
298-4281 Film Gp
| 29***81 | Film Group | 1 |
247-7424 Film Gp -Operator Controls, Notice
| 24***24 | Film Group; -Operator Controls, Notice | 1 |
247-7423 Film Gp -Operator Controls, Notice
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 16***70 | Film; (No Step) | 1 |
314-3660 Plate & Film Gp
| 31***60 | Plate & Film Group | 1 |
314-3661 Plate & Film Gp
| 31***61 | Plate & Film Group | 1 |
Undercarriage
297-9150 Adjustment Gp-Hydraulic Track
| 18***90 | Guard Group-Travel Motor | 1 |
| 19***40 | Idler Group-Front | 1 |
| 22***07 | Gear & Bearing Group-Swing | 1 |
229-1747 Frame Ar-Undercarriage
| 11***17 | Bracket | 4 |
| 22***24 | Frame As-Track Roller; (Rh) | 1 |
| 22***25 | Frame As-Track Roller; (Lh) | 1 |
229-1746 Frame Ar-Undercarriage
| 18***90 | Guard Group-Travel Motor | 1 |
| 19***40 | Idler Group-Front | 1 |
| 19***50 | Roller Ar-Track & Carrier | 1 |
235-7565 Frame As-Undercarriage
| 23***65 | Frame As-Undercarriage | 1 |
| 7X***63 | Bolt-Plt; (M20 X 2.5 X 60) | 4 |
| 7Y***81 | Guard As-Track Guide | 1 |
228-5515 Frame As-Undercarriage
| 11***17 | Bracket | 4 |
| 22***15 | Frame As-Undercarriage | 1 |
| 23***20 | Step | 4 |
228-5517 Guard Gp-Track Guide
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 1 |
| 18***74 | Cover As | 1 |
| 18***75 | Cover As | 1 |
7y-2202 Guard Gp-Track Guide
| 11***12 | Pipe | 16 |
| 18***64 | Support As | 16 |
| 23***74 | Guard As-Track Guide | 4 |
184-5790 Guard Gp-Travel Motor
| 10***85 | Seal Group-Duo-Cone | 2 |
| 11***51 | Shaft-Idler | 1 |
| 11***97 | Bearing | 2 |
184-5713 Guard Gp-Travel Motor
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 8 |
| 18***13 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 18***73 | Cover | 2 |
194-1240 Idler Gp-Front
| 11***96 | Idler Group-Front; (Front) (C) | 1 |
| 19***40 | Idler Group-Front | 1 |
| 19***42 | Cutting Edge; 150 X 2100, Spring Group-Recoil | 1 |
194-1241 Idler Gp-Front
| 09***44 | Pin; (Cotter) | 1 |
| 11***53 | Link-Track Master | 1 |
| 11***54 | Link-Track Master | 1 |
115-3696 Idler Gp-Front
| 11***96 | Idler Group-Front; (Front) (C) | 1 |
| 19***41 | Idler Group-Front, Cutting Edge; Incl 201-203 | 2 |
| 29***50 | Adjustment Group-Hydraulic Track | 2 |
236-8893 Link As-Track -Grease Lubricated Track
| 23***93 | Link As-Track; -Grease Lubricated Track | 1 |
| 24***65 | Roller Group-Track-Single Flange | 14 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
201-9116 Link As-Track
| 09***44 | Pin; (Cotter) | 1 |
| 11***53 | Link-Track Master | 1 |
| 11***54 | Link-Track Master | 1 |
194-1250 Roller Ar-Track & Carrier
| 17***92 | Seal Group-Duo-Cone | 1 |
| 19***50 | Roller Ar-Track & Carrier | 1 |
| 5H***48 | Seal (Part Of 5d***19 Assem.) | 1 |
7y-0362 Roller Ar-Track & Carrier
| 24***65 | Roller Group-Track-Single Flange | 18 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
| 7X***65 | Bolt; (M20x2.5x100-mm) | 72 |
6y-5323 Roller Gp-Track Carrier
| 15***86 | Collar; (Track Roller) | 2 |
| 15***96 | Ring; (Retaining) | 2 |
| 15***26 | Dowel | 1 |
247-0565 Roller Gp-Track-Single Flange
| 19***43 | Support As | 1 |
| 19***44 | Spring | 1 |
| 19***45 | Rod | 1 |
194-1242 Spring Gp-Recoil
| 19***42 | Cutting Edge; 150 X 2100, Spring Group-Recoil | 1 |
| 23***64 | Step Group | 1 |
| 23***07 | Track Group; -2-Required | 1 |
363-6262 Track Ar
| 23***93 | Link As-Track; -Grease Lubricated Track | 1 |
| 30***48 | Bolt-Track; (M20x1.5x68-mm) | 200 |
| 36***62 | Track Ar, Water Transfer Tube | 1 |
363-6263 Track Ar
| 12***64 | Shoe; (Track) | 50 |
| 23***93 | Link As-Track; -Grease Lubricated Track | 1 |
| 36***63 | Track Ar | 1 |
229-1864 Track Ar
| 12***64 | Shoe; (Track) | 45 |
| 20***16 | Link As-Track | 1 |
| 22***64 | Track Ar; -2-Required | 1 |
188-3239 Track Gp
| 18***39 | Track Group; -2-Required | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
236-8908 Track Gp
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
251-1848 Track Gp -2-Required
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 25***48 | Track Group; -2-Required | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
236-8907 Track Gp
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 23***07 | Track Group; -2-Required | 1 |
| 4I***67 | Cap | 1 |
251-1850 Track Gp -2-Required
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 25***50 | Track Group; -2-Required | 1 |
Work Tools
250-6418 Adjuster Gp-Bucket -Cb-Family
| 12***89 | Edge As | 1 |
| 25***18 | Adjuster Group-Bucket; -Cb-Family | 1 |
| 26***40 | Plate-Reinforcement | 1 |
250-6430 Adjuster Gp-Bucket -Db-Family
| 11***89 | Protector-Side Bar | 2 |
| 13***99 | Retainer As-G.E.T. | 4 |
| 25***30 | Adjuster Group-Bucket; -Db-Family | 1 |
287-6253 Bucket & Adjuster Gp -Heavy-Duty Rock, Cb-Family
| 11***08 | Pin-G.E.T. | 1 |
| 11***09 | Retainer As-G.E.T. | 1 |
| 28***53 | Bucket & Adjuster Group; -Heavy-Duty Rock, Cb-Family | 1 |
287-6251 Bucket & Adjuster Gp -Heavy-Duty, Cb-Family
| 28***51 | Bucket & Adjuster Group; -Heavy-Duty, Cb-Family | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 6 |
| 6I***71 | Bolt; (1-8x2.5-In) | 6 |
287-6252 Bucket & Adjuster Gp -Heavy-Duty, Cb-Family
| 1D***35 | Bolt (Mounted On Main Frame) | 8 |
| 23***47 | Sidecutter; (Rh) | 1 |
| 23***48 | Sidecutter; (Lh) | 1 |
239-2705 Bucket & Adjuster Gp -Mass Excavation, Db-Family
| 11***89 | Protector-Side Bar | 4 |
| 13***99 | Retainer As-G.E.T. | 8 |
| 23***05 | Bucket & Adjuster Group; -Mass Excavation, Db-Family | 1 |
287-6254 Bucket As-Heavy Duty -Cb-Family
| 28***54 | Bucket As-Heavy Duty; -Cb-Family | 1 |
| 6Y***72 | Tip Group-Long; -J-400, Heavy-Duty | 1 |
286-2181 Protector Gp-Side Bar
| 12***15 | Tip Group-Short; -J-400 | 1 |
| 28***81 | Protector Group-Side Bar | 1 |
286-2180 Protector Gp-Side Bar
| 11***08 | Pin-G.E.T. | 1 |
| 11***09 | Retainer As-G.E.T. | 1 |
| 28***80 | Protector Group-Side Bar | 1 |
283-3326 Sidecutter Gp
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 23***73 | Harness As-Heater & Air Cond; (Control Panel Switches) | 1 |
7y-0366 Sidecutter Gp
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 24***86 | Plate | 2 |
| 24***97 | Plate | 4 |
6y-5472 Tip Gp-Long -J-400, Heavy-Duty
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 23***73 | Harness As-Heater & Air Cond; (Control Panel Switches) | 1 |
198-8469 Tip Gp-Long
| 19***69 | Tip Group-Long; -Heavy Duty | 1 |
| 22***80 | Air Conditioner & Mounting Group | 1 |
| 22***82 | Duct Group-Cab Air | 1 |
195-9182 Tip Gp-Penetration Plus -J-400
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 19***82 | Tip Group-Penetration Plus; -J-400 | 1 |
127-0715 Tip Gp-Short -J-400
| 12***15 | Tip Group-Short; -J-400 | 1 |
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
198-8470 Tip Gp-Short
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 19***70 | Tip Group-Short | 1 |
329D L serial number reference
The PIN plate sits on the right-hand side of the upper frame near the base of the cab/operator's station (some units also carry a duplicate stamping on the frame rail). Read the first three characters as the serial number prefix, which ties to the model/build range; the following five digits are the sequential unit number within that range.
| Prefix | Identifies | Notes |
|---|---|---|
| DTZ | 329D / 329D L (base long-undercarriage configuration) | Cat service documentation covers this range under a combined 329D and 329D L title, C7 ACERT engine. Shared 329D/329D L range, not L-exclusive. |
| MNB | 329D L (base excavator) | Dedicated 329D L service documentation lists this range, C7 ACERT engine. |
| TZL | 329D L (base excavator) | Dedicated 329D L service documentation lists this range, C7 ACERT engine. |
| WLT | 329D L (base excavator) | Matches a documented 2010-model-year 329D L PIN, in addition to dedicated service-manual coverage. C7 ACERT engine. |
| EBM | 329D L & 329D LN (combined range) | Documentation for this range covers the 329D L and narrow-gauge 329D LN together. Treat as a shared L/LN range, not L-exclusive. |
| XDB | 329D L & 329D LN (combined range) | Documentation pairs this range with EBM under combined 329D L/329D LN repair-manual coverage. Same shared-range caveat as EBM. |
| BFC | 329D L (base excavator) | Dedicated 329D L service documentation lists this range. Confirm with dealer for exact serial-number cutoffs. |
| DJF | 329D L (base excavator) | Appears in both a dedicated 329D L service-manual range and a combined 329D/329D L parts-catalog reference. C7 engine. |
| JHJ | 329D L (base excavator) | Dedicated 329D L service documentation lists this range. Confirm with dealer for exact serial-number cutoffs. |
Frequently asked questions
What engine does the Caterpillar 329D L excavator use?
The 329D L runs a Cat C7 engine with ACERT Technology, an inline 6-cylinder, 7.2 L unit rated 140 kW (190 hp) standard, with an optional high-power setting of 152 kW (204-207 hp) for heavier digging. This differs from the later 329E L, which switched to the smaller-displacement C7.1 ACERT engine.
What is the operating weight of the Caterpillar 329D L?
Operating weight runs roughly 28.4-30.1 t (62,700-66,400 lb), varying with boom/stick length, counterweight, and undercarriage configuration ordered.
What replaced the Caterpillar 329D L?
The Cat 329E L succeeded the 329D L. It carries the Cat C7.1 ACERT engine and delivers comparable output with lower fuel burn for the same work.
What 329D L owners discuss
What engine powers the 329D L, and what's the reliability track record?
The 329D L runs the Cat C7 engine with ACERT technology, built to Tier 3 / Stage IIIA emissions. Net flywheel power runs 140 kW (190 hp) standard or 152 kW (207 hp) on the high-power option, both at 1800 rpm. This is not the C7.1 found in the later 329E L/LN, so there is no diesel particulate filter or active regen cycle to manage. The C7 platform is generally regarded as a solid long-haul engine, but two wear items recur in shop discussions: injectors that lose seal integrity with age and start pulling more oil than normal, and an oil cooler that's the near-automatic first suspect whenever oil turns up in the coolant. Techs report replacing the cooler resolves that complaint in the large majority of cases, even when the old cooler passes a static pressure test. Turbo wear and EGR cooler clogging on high-hour units tend to show up as gradual power loss rather than a sudden failure.
What hydraulic behavior do owners flag most often on the 329D L?
Boom and stick cylinder drift is the most discussed hydraulic complaint. Mechanics trace it to three usual causes: worn cylinder seals letting oil bypass the piston internally, a sticking circuit relief or anti-cavitation valve in the boom section of the main control valve, or hydraulic contamination scoring a cylinder bore or piston seal. A drift-rate and cycle-time check under load is the standard way to isolate which one it is before parts get swapped. Neglected filter changes and dirty top-off oil are the root cause operators point to most. Because uncontrolled boom drift is a fall-hazard issue with an elevated load or attachment, have your dealer verify cylinder and relief-valve condition before the machine goes back to work.
What undercarriage and final-drive wear patterns are typical for this size of Cat excavator?
The recurring failure point mechanics describe on 329-class Cat excavators is the floating face (duo-cone) seal between the sprocket and the travel motor housing. Once that seal fails, gear oil leaks out, contamination works into the planetary hub, and gear teeth, coupler splines and bearings wear far faster than normal. Left unaddressed it ends with a locked-up final drive. A packed, dirty undercarriage is called out as a common contributor, since built-up debris can push the seal out of position. Track wear should read even side to side; uneven wear or hooked sprocket teeth point to alignment or terrain habits rather than a parts defect. Routine gear-oil level checks and an annual gear-oil change are the standard prevention advice, along with keeping the tracks and rollers clean.
Are there known electrical or wiring issues specific to this model?
Yes. This generation of Cat excavator had a documented wiring harness issue where the insulation crumbles and flakes apart over time, eventually causing intermittent grounds and fault codes that don't point cleanly to one component. Caterpillar ran a support program covering the affected serial range that has since expired, so on an older used unit it's worth inspecting harness runs near the engine and pump compartment for cracked or oil-soaked insulation. More broadly, moisture intrusion into connectors and corrosion at ground points are the most common source of random fault codes and no-start complaints reported across this machine class; cleaning and dielectric-greasing connectors resolves a large share of intermittent electrical gremlins before any sensor or module gets replaced. Because wiring faults can mask a more serious underlying issue, have your dealer verify with a full harness inspection if flaking insulation is found.
Any quirks with the swing bearing or upper-structure turntable?
Nothing unique to the 329D L, but the general maintenance pattern operators apply to this size of excavator is worth knowing. The swing bearing needs regreasing roughly every 100 hours of operation, with some shops running a tighter 50-hour interval. Mounting bolts need a pre-tension check within the first few hundred hours after a new or rebuilt bearing goes in, then periodically after that. Popping noises, a rocking feel in the upper structure, or uneven swing resistance are treated as an early warning of a missed grease interval or loosening bolts, not something to keep running through a shift. Because a failed swing bearing can let the upper structure separate from the undercarriage, have your dealer verify bolt torque and bearing play if any of these symptoms appear.
How does fuel consumption and production compare in real-world use?
There's no single agreed number; burn rate is described as swinging by a wide margin based on load factor, duty cycle and operator habit rather than being a fixed spec. Operators comparing notes on this size of Cat medium excavator note that technique alone, smooth versus aggressive cycling, can shift both fuel burn and production meaningfully on the same machine. Between the two engine ratings, expect the 152 kW (207 hp) high-power option to burn more fuel per hour under equivalent load than the 140 kW (190 hp) standard rating, offset by higher material moved per cycle.
What should a buyer check before purchasing a used 329D L?
Confirm the serial number and hour meter match the paperwork, and treat unusually low hours for the machine's age as something to investigate rather than a bonus. Walk the undercarriage first: look for even shoe wear side to side, rounded rather than hooked sprocket teeth, and no seepage behind the sprockets that would point to a failing final-drive seal. Pull the dipsticks and check fluid condition in the engine, hydraulic tank and final drives; dirty or milky fluid is a red flag on any C7-equipped machine given the model's known oil-cooler and injector wear points. Inspect wiring harness runs for cracked or flaking insulation, particularly relevant on this model given its documented harness issue. Finally, run the machine through a full cycle with an experienced operator and watch for cylinder drift, delayed hydraulic response, or unusual noise from the swing bearing and travel motors before agreeing on price.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 329D L. Related factory variants of the same model family:
329D L
Need a specific 329D L part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.