Caterpillarexcavator
Caterpillar 323D LN
Maintenance schedule, common problems & OEM parts breakdown
The Cat 323D LN is a mid-size, roughly 20-25 t class crawler hydraulic excavator built on Caterpillar's D-series 320-323 excavator platform. Early-production units run the mechanically-governed Cat 3066 ATAAC turbocharged, air-to-air-aftercooled inline-six diesel rated 103 kW (140 hp) net; later-production units switch to the electronically controlled Cat C6.4 ACERT in the same power class. Operating weight runs roughly 21.8-22.7 t (48,100-49,960 lb) depending on boom and stick configuration, on a narrower and slightly lighter undercarriage than the standard 323D L. Production ran roughly from the mid-2000s into the early 2010s, following the earlier 323C-series machines and preceding the C6.6 ACERT-powered 323E LN. Caterpillar offered the line with reach, mass-excavation, and VA booms paired with multiple stick lengths, alongside L (600 mm shoe, wide gauge), LN (500 mm shoe, narrow gauge), S, and SA configuration variants sharing the same basic platform.
The defining change within the 323D LN's own production run is the engine swap from the mechanical 3066 ATAAC to the electronic C6.4 ACERT partway through the build, which shifts filtration, injector service, and diagnostics enough that a buyer needs to check the engine serial plate rather than assume from the model badge. The LN's narrow-gauge undercarriage trims shipping width and cuts some weight versus the L, at the cost of higher ground pressure and reduced side-to-side stability, so wear on rollers, idlers, and track links runs faster under sideloaded or sloped work. In the used market the 323D LN remains a practical buy: it shares its bucket linkage and quick-coupler mount with the 318 and 321 class, keeping attachment and parts support broad years after Caterpillar moved on to the E-series, and its well-documented wear points - swing gearcase, hydraulic pump pressure sensors, pilot-lock wiring - make it a known quantity for a buyer doing a pre-purchase inspection.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 323D LN specifications
Engine
| Engine model | Cat 3066 ATAAC diesel on early-production machines; Cat C6.4 ACERT diesel on later-production machines — inline 6-cylinder, turbocharged and air-to-air aftercooled. Engine varies by production block; check the engine serial plate to confirm which is fitted before ordering parts. |
| Net power (ISO 9249) at 1800 rpm | 103 kW (140 hp) |
| Bore x stroke | 102 mm x 130 mm (4.0 in x 5.1 in) |
| Displacement | 6.4 L (390 cu in) |
| Emissions tier | Meets EU Stage II non-road emission standard per factory spec sheet; a separate US EPA tier rating for this exact model is not documented |
Weights
| Operating weight, 323D LN (500 mm shoes) | 21 820-22 660 kg (48,100-49,960 lb), varies by boom/stick configuration |
| Operating weight, 323D L (600 mm shoes), for comparison | 21 820-22 720 kg (48,100-50,090 lb), varies by boom/stick configuration |
| Ground pressure, 323D LN (500 mm shoes) | 0.55-0.57 bar (55-57 kPa, 8.0-8.3 psi) |
| Ground pressure, 323D L (600 mm shoes), for comparison | 0.46-0.48 bar (46-48 kPa, 6.7-7.0 psi) |
| Counterweight | 4750 kg (10,470 lb) standard on the LN undercarriage (4420 kg / 9,740 lb on the L undercarriage) |
Dimensions
| Transport length | 9460-10 050 mm (31'0"-33'0"), varies by boom/stick |
| Transport height (shipping height with bucket) | 3030-3170 mm (9'11"-10'5"), varies by boom/stick |
| Tail swing radius | 2750 mm (9'0") |
| Track shoe width | 500 mm (20 in) triple-grouser standard on the LN undercarriage; 600 mm optional. (L undercarriage: 600 mm standard, 700/800/900 mm optional) |
| Ground clearance | 460 mm (1'6") |
| Undercarriage length (track length) | 4450 mm (14'7") |
| Length to center of rollers | 3650 mm (12'0") |
| Track gauge, 323D LN | 1990 mm (6'6"), narrower than the 2380 mm (7'10") L undercarriage |
| Upperstructure width | 2490 mm (8'2") |
Performance
| Max digging depth | 5.33-6.68 m (17'6"-21'11"), varies by boom/stick configuration |
| Max reach at ground line | 8.52-10.20 m (27'11"-33'6"), varies by boom/stick configuration |
| Max dump/loading height | 5.71-8.43 m (18'9"-27'8"), varies by boom/stick configuration |
| Max cutting height | 8.71-11.51 m (28'7"-37'9"), varies by boom/stick configuration |
| Swing speed | 11.5 rpm |
| Max travel speed | 5.5 km/h (3.4 mph) |
| Max drawbar pull | 206 kN (46,300 lbf) |
Forces
| Bucket digging force (ISO 6015) | 126-169 kN (28,300-38,000 lbf); highest with the shortest stick, lowest with the longest stick |
| Stick digging force (ISO 6015) | 115-158 kN (25,850-35,500 lbf); highest with the shortest stick, lowest with the longest stick |
Service capacities (summary)
| Fuel tank | 320 L (84.5 gal) |
| Hydraulic system, including tank | 260 L (68.7 gal); hydraulic tank alone 120 L (31.7 gal) |
| Engine oil | 30 L (7.9 gal) |
| Cooling system | 25 L (6.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
323D LN fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 30.3 L (8.0 US gal) | Cat DEO (Diesel Engine Oil), API CH-4 spec. SAE 15W-40 for most ambient conditions; SAE 10W-30 for cold-weather starting down to about -20C (-4F). Check the OMM oil-viscosity chart for the exact engine fitted to this serial range. |
| Cooling system | 25.4 L (6.7 US gal) | Cat ELC (Extended Life Coolant), factory premix or 50/50 concentrate with water. Cat DEAC (Diesel Engine Antifreeze/Coolant) is the standard-service alternative where ELC service intervals do not apply. |
| Fuel tank | 320 L (84.6 US gal) per LN-specific spec sheets; a related 323D L configuration lists 409 L (108 US gal) - varies by configuration/series, confirm against the machine's own nameplate | No. 2-D diesel fuel, low- or ultra-low-sulfur grade matching the emissions tier of the engine fitted. |
| Hydraulic system total (incl. tank) | 260 L (68.7-69 US gal) | Cat HYDO Advanced 10, multigrade hydraulic oil for wide ambient range (roughly -20C to 40C / -4F to 104F). Cat HYDO Advanced 30 recommended where ambient stays consistently hot. |
| Hydraulic tank (only) | About 121 L (32 US gal); not separately published for this exact configuration — verify against the machine's own nameplate. | Same fluid as hydraulic system total: Cat HYDO Advanced 10 (or Advanced 30 in hot climates). |
| Final drive (each) | About 9.8 L (2.6 US gal) per side; not separately published for this exact configuration — verify against the machine's own nameplate. | Cat TDTO (Transmission/Drive Train Oil), meets Cat TO-4 spec. SAE 30 single grade standard; Cat TDTO-TMS multigrade for wide ambient-temperature service. |
| Swing drive | 8.3 L (2.2 US gal) | Cat TDTO, Cat TO-4 spec, same fluid as the final drives. |
| Grease (spec only) | No reservoir capacity - serviced per the lubrication interval schedule at each grease point | Cat Advanced 3Moly Grease (NLGI 2, molybdenum-disulfide fortified) for pin and bucket-linkage joints under heavy or shock loading. Cat Multipurpose Grease (NLGI 2, non-moly) is acceptable for lighter-duty points where the OMM allows it. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 323D LN maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 323D LN beyond the schedule
Predictive Maintenance & Fluid Analysis
Confirm which engine is fitted - mechanically-governed Cat 3066 ATAAC or the later electronic C6.4 ACERT - before setting oil-sample baselines, since the two carry different wear-metal norms. Pull S·O·S engine oil, hydraulic oil, coolant, and final-drive/swing-drive gear-oil samples on schedule rather than waiting for symptoms. Watch swing-gearcase oil for metal, a known early-warning sign on this platform's swing-reduction gearset. Track main-pump discharge-pressure sensor readings; drifting or intermittent signal often precedes a harness fault, not a pump failure.
Corrective & Common Repairs
The most common hydraulic complaint is a main-pump discharge-pressure sensor or relief-valve solenoid losing signal, making the machine feel underpowered or bog down under load - check the connector and harness near the pump housing before replacing parts. A recurring no-restart-after-warm-shutdown fault traces to hydraulic oil migrating down the pilot-lock lever boot and shorting the neutral-start wiring; repair the harness, don't just swap the fuse. Grinding or catching on swing points to the swing-reduction gearcase, not the motor.
Overhaul & Rebuild Points
Injector and top-end service splits by build: mechanical unit-pump O-ring service on early 3066 ATAAC blocks versus ECM injector-trim programming on later C6.4 ACERT blocks - confirm from the engine serial plate before ordering. Rebuild the swing-reduction gearcase and check swing-bearing bolt torque and ring-gear play once oil sampling shows metal. Final-drive and travel-motor seals are the next high-hour wear point. On the LN's narrower-gauge undercarriage, expect earlier roller, idler, and track-link wear than the wider 323D L when the machine works slopes or sideloaded cuts.
Seasonal & Environmental Servicing
Cold climates: run SAE 10W-30 Cat DEO down to about -20C (-4F), verify ELC/DEAC antifreeze concentration before freeze season, and drain the fuel-tank water separator more often as condensation increases. Hot, dusty sites: step up to Cat HYDO Advanced 30 where ambient stays consistently hot, clean the radiator core and AC condenser fins of packed debris, and check the air-filter service indicator more frequently. On the LN's narrow-gauge undercarriage, adjust track tension for seasonal ground - looser in frozen, rocky conditions, tighter in soft mud - to control accelerated roller and idler wear.
323D LN common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 117-4089 | Element-Water Separator | Fuel system service | Check fitment → |
| 131-8821 | Filter Element As-Air | Air intake service | Check fitment → |
| 131-8822 | Filter Element As-Air | Air intake service | Check fitment → |
| 128-2686 | Filter Element As-Air | Air intake service | Check fitment → |
| 4I-1278 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
323D LN fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 0110-04 | Engine coolant temperature sensor circuit voltage below normal. | Corroded or wet connector pins, chafed sensor wiring, or a failed coolant temperature sensor. | Inspect the sensor connector and harness near the thermostat housing, test sensor resistance against spec, and replace if out of range. |
| 2265-04 | Hydraulic pump 1 (front) discharge pressure sensor circuit voltage below normal. | Water intrusion at the sensor connector, chafed wiring along the pump case, or a failed pressure sensor. | Inspect the connector for corrosion, check harness routing near the pump, and test sensor output against spec before replacing. |
| 2266-03 | Hydraulic pump 2 (rear) discharge pressure sensor circuit voltage above normal. | Shorted or pinched sensor wiring, or a failed pressure sensor. | Check wiring for shorts near the pump, verify sensor supply voltage, and replace the sensor if it fails spec. |
| 0100-03 | Engine oil pressure sensor circuit voltage above normal. | Chafed or shorted sensor wiring, a corroded connector, or a failed oil pressure sensor. | Inspect the sensor connector and harness, then confirm actual oil pressure with a mechanical gauge before replacing the sensor. |
| 0190-08 | Engine speed/timing sensor signal frequency abnormal. | Sensor air gap out of adjustment, debris on the sensor tip, or damaged wiring near the flywheel housing. | Check sensor mounting and air gap, inspect the harness for chafe points, and reset the gap to spec. |
| 0001-07 to 0006-07 | Individual fuel injector solenoid (cylinder-specific) fails the engine ECM's automatic fuel system verification test. | Frequently not a bad injector on this engine platform - most often the engine never reaches full operating temperature (stuck-open thermostat), which stops the ECM self-test from completing. | Confirm the thermostat opens and coolant reaches normal operating temperature, then rerun the fuel system verification test in Cat ET before condemning any injector. |
| 0168-04 | Battery/electrical system voltage below normal. | Weak or failing battery, corroded battery terminals or ground straps, or low alternator output. | Load-test the battery, clean and torque terminal and ground connections, and check charging voltage at idle and at rated speed. |
| 0091-08 | Throttle position (engine speed dial) signal frequency abnormal. | Worn or dirty throttle dial/sensor, a loose connector, or a wiring fault in the dial circuit. | Inspect the throttle dial connector and wiring, then recalibrate the throttle position sensor in Cat ET if it checks within spec. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
323D LN attachments & work tools
Buckets
General duty (GD), heavy duty (HD), and severe-duty/rock buckets are offered for this machine on Cat's B-linkage two-pin mount, a linkage shared with the 318 and 321 class. Reference bucket runs about 1.15-1.3 m3 (1.5-1.7 yd3) at roughly 1.4 m (55 in) width; catalog range for this class spans roughly 0.4-1.7 m3 (0.5-2.2 yd3) heaped depending on width and duty class. HD buckets carry thicker floor and side wear plates than GD for mixed dirt, clay, and rock; rock/severe-duty buckets trade capacity for reinforcement in abrasive or blocky material. Both pin-on and quick-coupler mount versions are used.
Hydraulic hammers
Operating weight of roughly 21.9-23 t (48,200-50,700 lb, varies by configuration/series) places this machine in the Cat H120-to-H130 breaker bracket. H120-class hammers cover 17,000-26,000 kg (37,400-57,200 lb) carrier weight, about 1,300 kg (2,860 lb) service weight, and roughly 4,067 J (3,000 ft-lbf) impact energy at 350-620 bpm. H130-class hammers cover 19,000-32,000 kg (41,800-70,400 lb) carriers, about 1,700 kg (3,740 lb) service weight, and roughly 4,745 J (3,500 ft-lbf) at 320-600 bpm for heavier rock and demolition work. Smaller H110/H115-class hammers are sized for the lighter 312-320 bracket and are undersized for this machine.
Quick couplers
This class uses a hydraulic pin-grabber quick coupler on Cat's B-linkage, with an 80 mm (3.15 in) pin diameter, shared across the 318, 321, and 323 family so buckets and tools interchange with those sibling machines. Coupler engagement is cab-switch controlled; manual pin-on mounting without a coupler is also used in the field.
Thumbs/grapples
Bolt-on or hydraulically adjustable thumbs mount to the stick alongside the bucket for grabbing irregular material such as rock, stumps, and debris. Demolition/sorting grapples, orange-peel grapples, and rotating hydraulic grapples sized for this weight class are also fitted, generally through the same B-linkage coupler, for scrap sorting, debris handling, and material grabbing.
Rippers
Single-shank rippers sized for the roughly 20-25 t excavator bracket mount pin-on or via the B-linkage coupler for breaking frozen ground, asphalt, hardpan, and light rock. This class is not intended for continuous quarry-grade ripping; multi-shank rippers are not typical for this size of machine.
Hydraulic-kit notes
A standard auxiliary hydraulic valve is fitted, with optional single-acting (one-way, both-pump) and bi-directional circuit kits switched from the cab for hammers, shears, pulverizers, and grapples. Low-flow auxiliary circuits run around 186 bar (2,700 psi) for tools such as hammers, while the high-flow circuit runs up to about 345 bar (5,000 psi), close to the machine's main hydraulic relief setting of roughly 350 bar (5,076 psi). Match any work tool to the machine's actual factory-fitted auxiliary circuit, since the circuit kit is a factory option and varies by configuration.
All 323D LN assemblies by section
Every catalogued assembly group for the Caterpillar 323D LN. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
109-9313 Air Cleaner & Mounting Gp
| 10***13 | Air Cleaner & Mounting Group | 1 |
| 12***11 | Air Cleaner Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
240-3944 Air Cleaner Ar -Precleaner
| 23***66 | Air Cleaner Group | 1 |
| 24***44 | Air Cleaner Ar; -Precleaner | 1 |
| 24***66 | Hood Group; -Pre-Cleaner | 1 |
124-1711 Air Cleaner Gp
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
| 12***11 | Air Cleaner Group | 1 |
| 13***21 | Filter Element As-Air; (Secondary) | 1 |
239-6566 Air Cleaner Gp
| 11***59 | Damper | 1 |
| 13***80 | Precleaner As; (Air) | 1 |
| 13***89 | Clamp | 1 |
239-6612 Air Cleaner Gp
| 12***86 | Filter Element As-Air; (Primary, Ultra High Efficiency)(Filter) | 1 |
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 17***92 | Cover As | 1 |
5i-7589 Cartridge As-Turbocharger
| 13***46 | Plate | 1 |
| 13***47 | Bearing-Thrust | 1 |
| 13***48 | Deflector-Oil | 1 |
230-2978 Lines Gp-Air -Aftercooler To Turbocharger
| 20***41 | Pipe As | 1 |
| 20***46 | Hose | 1 |
| 21***11 | Hose | 1 |
239-6565 Lines Gp-Air -Air Cleaner To Turbocharger
| 23***65 | Lines Group-Air; -Air Cleaner To Turbocharger | 1 |
| 26***50 | Hose-Air | 1 |
| 26***51 | Hose-Air | 1 |
171-9060 Lines Gp-Muffler Drain
| 09***61 | Strap; (Cable) | 1 |
| 17***60 | Lines Group-Muffler Drain | 1 |
| 17***72 | Pipe As | 1 |
212-8552 Manifold Gp-Exhaust
| 09***74 | Nut; (M8x1.25-Thd) | 2 |
| 17***52 | Manifold | 1 |
| 17***53 | Gasket | 2 |
212-8551 Manifold Gp-Inlet
| 16***57 | Heater As; (24-Volt) | 1 |
| 21***51 | Manifold Group-Inlet | 1 |
| 21***77 | Manifold | 1 |
324-4172 Muffler Gp
| 32***72 | Muffler Group | 1 |
| 5I***87 | Cover | 1 |
| 5I***89 | Cartridge As-Turbocharger | 1 |
266-6314 Muffler Gp
| 09***83 | Clamp Assembly. | 1 |
| 17***54 | Stud; (M10x1.5x15-mm, M10x1.25x20-mm) | 3 |
| 26***14 | Muffler Group | 1 |
205-6741 Turbocharger Gp
| 20***41 | Turbocharger Group | 1 |
| 23***66 | Housing | 1 |
| 5B***04 | Drive Screw--Turbocharger Warning Plate | 2 |
279-7860 Turbocharger Gp
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***27 | Bracket As | 1 |
| 11***29 | Lever As | 1 |
Basic Engine
178-6512 Camshaft Gp
| 09***28 | Key | 1 |
| 17***12 | Camshaft Group | 1 |
| 17***35 | Camshaft | 1 |
212-8646 Cover Gp-Valve Mechanism
| 17***83 | Gasket | 6 |
| 18***58 | Cover | 2 |
| 21***46 | Cover Group-Valve Mechanism | 1 |
212-8549 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 12***05 | Crankshaft Group | 1 |
217-5416 Cylinder Block Gp
| 09***41 | Bolt-Bearing Cap; (M14x2x120-mm) | 14 |
| 09***05 | Cap | 2 |
| 09***11 | Cap | 1 |
222-8242 Cylinder Block Gp
| 09***01 | Washer; (3mm Thk) | 2 |
| 21***67 | Eye | 1 |
| 21***16 | Cylinder Block Group | 1 |
310-9635 Cylinder Head As
| 09***38 | Washer; (7.8x13.5x2-mm Thk) | 1 |
| 09***88 | Cap | 3 |
| 18***72 | Guide; (Intake) | 3 |
310-9634 Cylinder Head As
| 09***88 | Cap | 3 |
| 18***72 | Guide; (Intake) | 3 |
| 18***73 | Guide; (Exhaust) | 3 |
212-8543 Cylinder Head Gp
| 09***38 | Washer; (7.8x13.5x2-mm Thk) | 4 |
| 18***15 | Pipe | 1 |
| 21***43 | Cylinder Head Group | 1 |
205-6792 Flywheel Gp
| 09***01 | Washer; (3mm Thk) | 6 |
| 20***88 | Gear; (127-Teeth) | 1 |
| 20***92 | Flywheel Group | 1 |
212-8550 Gear Gp-Front
| 21***50 | Gear Group-Front | 1 |
| 21***76 | Gear; (137.79mm Od) | 1 |
| 22***02 | Plate | 1 |
196-7972 Housing Gp-Flywheel
| 12***65 | Housing | 1 |
| 19***72 | Housing Group-Flywheel | 1 |
| 32***31 | Sensor Group-Speed; (Engine) | 1 |
212-8547 Housing Gp-Front
| 09***35 | Plug-Drain | 1 |
| 09***28 | Seal-O-Ring (Id=109.5mm) | 1 |
| 09***32 | Washer; (15.8x22.5x2-mm Thk) | 1 |
266-6316 Mounting Gp-Alternator
| 09***01 | Washer; (3mm Thk) | 3 |
| 09***83 | Bolt; (M12 X 1.25 X 30mm) | 1 |
| 17***98 | Bolt; (M12x1.25x135-mm) | 1 |
266-6297 Mounting Gp-Engine
| 10***29 | Washer; (21.5x120x8-mm Thk) | 6 |
| 11***84 | Bracket-Rear | 2 |
| 11***85 | Bracket-Front | 2 |
125-2963 Mounting Gp-Starting Motor
| 12***63 | Mounting Group-Starting Motor | 1 |
| 13***69 | Cover | 1 |
| 13***70 | Bolt; (M5x0.8x25-mm) | 1 |
212-8649 Pan Gp-Oil -Engine
| 09***40 | Washer | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***68 | Gasket | 1 |
212-8548 Piston & Rod Gp
| 09***34 | Pin | 6 |
| 09***54 | Bolt; (M12x1.25-1x85-mm) | 2 |
| 09***16 | Nut; (M12x1.25-Thd) | 2 |
233-1157 Piston & Rod Gp
| 09***34 | Pin | 6 |
| 09***54 | Bolt; (M12x1.25-1x85-mm) | 2 |
| 09***16 | Nut; (M12x1.25-Thd) | 2 |
239-6561 Pulley Gp-Engine
| 23***61 | Pulley Group-Engine | 1 |
| 29***84 | Pulley | 1 |
| 29***85 | Bearing | 2 |
255-3018 Pulley Gp-Idler -Air Compressor
| 21***84 | Pulley | 1 |
| 22***72 | Belt-Serpentine; (Fan) | 1 |
| 25***18 | Pulley Group-Idler; -Air Compressor | 1 |
305-4908 Pulley Gp-Idler
| 23***26 | Pulley-Idler | 1 |
| 23***27 | Bolt; (M8x1.25x110-mm) | 1 |
| 23***30 | Collar | 1 |
212-8544 Valve Mechanism Gp
| 09***74 | Nut; (M8x1.25-Thd) | 1 |
| 09***96 | Plug | 1 |
| 09***25 | Screw | 1 |
Cooling System
178-6584 Cooler Gp-Engine Oil
| 09***21 | Plug | 2 |
| 12***70 | Core As-Oil Cooler | 1 |
| 17***84 | Cooler Group-Engine Oil | 1 |
265-3503 Fan Gp-Blower
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 24***44 | Fan As; (10-Blade) | 1 |
266-6331 Fan Gp-Suction
| 21***96 | Bushing | 2 |
| 26***31 | Fan Group-Suction | 1 |
| 26***32 | Bracket | 1 |
212-8614 Lines Gp-Water
| 09***63 | Seal-O-Ring (Id=54.40mm) | 1 |
| 09***38 | Washer, Spring | 5 |
| 09***38 | Stud | 12 |
212-8555 Pump Gp-Water
| 12***47 | Washer; (1-mm Thk) | 1 |
| 17***33 | Pump Group-Water | 1 |
| 17***34 | Impeller | 1 |
265-3573 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 2 |
| 09***35 | Clamp | 2 |
230-2976 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
230-2977 Radiator & Hyd Oil Cooler Gp
| 23***77 | Radiator & Hydraulic Oil Cooler Group | 1 |
Electrical And Starting System
132-1829 Alarm Gp
| 08***29 | Spacer; (9x19x30-mm Thk) | 5 |
| 09***19 | Grommet | 1 |
| 10***80 | Bracket As | 1 |
212-8561 Alternator Gp-Charging
| 08***29 | Spacer; (9x19x30-mm Thk) | 5 |
| 09***19 | Grommet | 1 |
| 10***80 | Bracket As | 1 |
259-5275 Battery & Wiring Gp
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 17***29 | Cable As | 1 |
| 19***15 | Cable As | 1 |
259-5278 Battery & Wiring Gp -Cold Weather
| 22***96 | Antenna; (Flexible)(Flex) | 1 |
| 25***78 | Battery & Wiring Group; -Cold Weather | 1 |
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
270-5493 Control & Mtg Gp-Communication -Product Link 121sr
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 27***93 | Control & Mtg Group-Communication; -Product Link 121sr | 1 |
247-5284 Control & Mtg Gp-Communication -Product Link 300
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
| 24***84 | Control & Mtg Group-Communication; -Product Link 300 | 1 |
221-8872 Control & Mtg Gp-Machine
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 22***72 | Control & Mtg Group-Machine | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 29***74 | Software Group-Machine; (Software Only) | 1 |
| 29***75 | Service Group-Machine | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 32***83 | Monitor Group-Operator | 1 |
| 32***86 | Software Group-Monitor | 1 |
227-7698 Electronics Gp-Machine
| 22***98 | Electronics Group-Machine | 1 |
| 7I***73 | Strap-Cable | 1 |
221-8861 Electronics Gp-Monitor
| 11***18 | Clip | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
| 7X***21 | Bolt; (M10x1.5x12-mm) | 1 |
259-5295 Fastener Gp-Wiring Harness -Joystick
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 26***87 | Wiring Group-Communication; -Product Link 121sr | 1 |
| 27***93 | Control & Mtg Group-Communication; -Product Link 121sr | 1 |
259-5294 Fastener Gp-Wiring Harness -Foot Switch
| 20***61 | Wiring Group-Grade Control; -Sensor | 1 |
| 25***46 | Mounting Group-Radio; -Grade Control | 1 |
| 25***94 | Fastener Group-Wiring Harness; -Foot Switch | 1 |
259-5237 Fastener Gp-Wiring Harness -Heavy Lift
| 11***18 | Clip | 1 |
| 25***37 | Fastener Group-Wiring Harness; -Heavy Lift | 1 |
| 7X***21 | Bolt; (M10x1.5x12-mm) | 1 |
259-5293 Fastener Gp-Wiring Harness -Pedal Control
| 25***93 | Fastener Group-Wiring Harness; -Pedal Control | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
292-0276 Grade Control Ar-Satellite -Accugrade
| 24***84 | Control & Mtg Group-Communication; -Product Link 300 | 1 |
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 26***86 | Wiring Group-Communication; -Product Link 321sr | 1 |
264-8623 Installation Ar-Communication -Product Link 121sr
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***49 | Receptacle As. | 1 |
| 20***62 | Key As-Electronic; (Security) | 2 |
264-8622 Installation Gp-Communication -Product Link 321sr
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
| 17***18 | Band | 1 |
260-2124 Installation Gp-Security -Machine Security System
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
| 17***18 | Band | 1 |
153-2523 Lamp Gp-Flood
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 25***43 | Lighting Group-Flood; -Boom, Lh | 1 |
| 25***47 | Lighting Group-Flood; -Boom, Rh | 1 |
167-3441 Lamp Gp-Flood -Cab
| 11***36 | Clip | 3 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
153-2521 Lamp Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
273-9580 Lighting Gp-Boom -1-Piece Lg
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 27***80 | Lighting Group-Boom; -1-Piece Long | 1 |
274-7639 Lighting Gp-Boom -Stub
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 6 |
| 12***37 | Washer; (17.5x40x4-mm Thk) | 2 |
| 12***38 | Washer-Rubber; (14.5x40x2-mm Thk) | 2 |
4i-5409 Lighting Gp-Chassis -Front, Rh
| 14***45 | Bolt; (M16x2x20-mm) | 2 |
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 2 |
| 19***59 | Support | 2 |
259-5047 Lighting Gp-Flood -Boom, Rh
| 23***95 | Panel Group-Circuit Breaker | 1 |
| 25***47 | Lighting Group-Flood; -Boom, Rh | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
259-5043 Lighting Gp-Flood -Boom, Lh
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 8 |
| 08***38 | Shim (1.0mm Thick); (1.0 mm Thick) | 2 |
| 08***40 | Shim (0.4mm Thick); (0.4 mm Thick) | 6 |
252-1241 Lighting Gp-Flood -Cab
| 11***36 | Clip | 4 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
252-1242 Lighting Gp-Flood -Cab Guard
| 11***36 | Clip | 2 |
| 13***84 | Bracket | 1 |
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
297-5592 Mounting Gp-Grade Control -Accugrade
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***14 | Switch As-Magnetic; (24-Volt)(Heater Relay) | 1 |
| 12***23 | Block; (Terminal) | 1 |
238-2294 Panel & Mtg Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
238-2295 Panel Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
251-0542 Panel Gp-Switch -Engine Speed, Start
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
| 18***08 | Knob As; (Throttle Position) | 1 |
251-0544 Panel Gp-Switch -Engine Speed, Start
| 11***93 | Lockwasher | 5 |
| 25***44 | Panel Group-Switch; -Engine Speed, Start | 1 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
292-0291 Receiver Gp-Satellite -Dual Gnss, Ms992
| 09***50 | Stopper Set | 1 |
| 09***80 | Packing | 2 |
| 09***85 | Bolt Set | 1 |
297-5594 Sensor Ar-Grade -Angle Sensor
| 09***50 | Stopper Set | 1 |
| 09***80 | Packing | 2 |
| 09***85 | Bolt Set | 1 |
272-4774 Starting Motor Gp-Electric
| 27***74 | Starting Motor Group-Electric | 1 |
| 2H***22 | Lockwasher | 1 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 1 |
125-2988 Starting Motor Gp-Electric
| 09***50 | Stopper Set | 1 |
| 09***80 | Packing | 2 |
| 09***85 | Bolt Set | 1 |
5c-6108 Switch Gp-Refueling -Fuel Tank Shutoff
| 10***10 | Seal | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 24***08 | Receptacle As-Connector; (6-Pin) | 1 |
7n-0719 Switch Gp-Disconnect -Battery
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
259-5274 Switch Gp-Magnetic -Start Relay
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 1S***12 | Screw-Tapping | 2 |
| 23***95 | Harness As-Switch; (Refueling Pump, Start) | 1 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 1S***12 | Screw-Tapping | 2 |
| 23***13 | Switch Group-Position; -Hydraulic Lockout | 1 |
238-1594 Switch Gp-Push Button -Refueling Pump, Start
| 23***94 | Switch Group-Push Button; -Refueling Pump, Start | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
238-1596 Switch Gp-Push Button -Refueling Pump, Stop
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***10 | Seal | 1 |
| 23***96 | Switch Group-Push Button; -Refueling Pump, Stop | 1 |
319-4420 Switch Gp-Rotary -Throttle Position
| 12***66 | Switch As-Roller | 1 |
| 24***56 | Bracket | 1 |
| 25***40 | Spacer | 1 |
106-0107 Switch Gp-Rotary -Engine Speed
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 13***89 | Clip; (Ladder) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***75 | Ladder Clip | 1 |
252-1225 Switch Gp-Wiper
| 11***36 | Clip | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 7 |
259-5282 Wiring Gp-Auxiliary Control -System 17, Combined Fn, Med Pr
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 3 |
| 14***51 | Connector-Receptacle | 3 |
259-5281 Wiring Gp-Auxiliary Control -System 16, 1-Way, 2-Pump
| 11***36 | Clip | 2 |
| 11***18 | Clip | 2 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
259-5277 Wiring Gp-Boom Float
| 09***80 | Switch-Magnetic; (24-Volt)(Start Relay) | 1 |
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 1 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 3 |
251-0613 Wiring Gp-Cab -Boom Float
| 10***75 | Switch As-Toggle; (Hydraulic Attachment Control) | 1 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 4 |
| 23***08 | Plug As-Connector; (4-Pin) | 1 |
267-7642 Wiring Gp-Cab -Quick Coupler
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 11***18 | Clip | 2 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
259-5042 Wiring Gp-Cab
| 11***37 | Clip | 1 |
| 11***18 | Clip | 3 |
| 13***89 | Clip; (Ladder) | 1 |
267-7887 Wiring Gp-Communication -Product Link 121sr
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***95 | Strap; (Cable) | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
267-7886 Wiring Gp-Communication -Product Link 321sr
| 11***18 | Clip | 2 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
| 23***10 | Plug As-Connector; (6-Pin) | 1 |
251-0435 Wiring Gp-Console -Rh
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 2 |
| 25***35 | Wiring Group-Console; -Rh | 1 |
| 25***83 | Bracket | 2 |
251-0433 Wiring Gp-Console
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
| 25***33 | Wiring Group-Console | 1 |
| 25***83 | Bracket | 1 |
231-1836 Wiring Gp-Console -Lh
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
| 16***11 | Switch As-Toggle; (Manual Engine Speed Control) | 1 |
251-0482 Wiring Gp-Converter
| 10***49 | Plate | 2 |
| 11***36 | Clip | 8 |
| 13***89 | Clip; (Ladder) | 1 |
251-0485 Wiring Gp-Converter
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 24***08 | Receptacle As-Connector; (6-Pin) | 1 |
| 25***85 | Wiring Group-Converter; -12-Volt, 7-Ampere | 1 |
204-3461 Wiring Gp-Grade Control
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
259-5283 Wiring Gp-Medium Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***18 | Clip | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
259-5041 Wiring Gp-Platform
| 09***91 | Screw-Machine; (M5x0.8x35-mm) | 2 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 2 |
| 21***72 | Switch As-Magnetic; (24-Volt)(Refueling Power Relay) | 1 |
267-7746 Wiring Gp-Quick Coupler
| 09***91 | Screw-Machine; (M5x0.8x35-mm) | 2 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 2 |
| 21***72 | Switch As-Magnetic; (24-Volt)(Refueling Power Relay) | 1 |
238-1570 Wiring Gp-Refueling Pump -Refueling
| 09***31 | Ring - Retaining | 2 |
| 09***78 | Plate (8.0 mm Thick) | 1 |
| 09***79 | Plate (9.0 mm Thick) | 1 |
Engine Arrangement
239-6592 Engine Ar
| 23***62 | Engine Ar-Complete | 1 |
| 23***92 | Engine Ar | 1 |
| 26***03 | Fan Group-Blower | 1 |
287-0104 Engine Ar
| 12***63 | Mounting Group-Starting Motor | 1 |
| 17***12 | Camshaft Group | 1 |
| 17***81 | Lines Group-Engine Oil | 1 |
239-6563 Engine Ar
| 12***63 | Mounting Group-Starting Motor | 1 |
| 12***88 | Starting Motor Group-Electric | 1 |
| 17***12 | Camshaft Group | 1 |
287-0089 Engine Ar-Complete
| 23***61 | Pulley Group-Engine | 1 |
| 28***89 | Engine Ar-Complete | 1 |
| 28***04 | Engine Ar | 1 |
297-7766 Engine Ar-Complete
| 23***61 | Pulley Group-Engine | 1 |
| 28***04 | Engine Ar | 1 |
| 29***66 | Engine Ar-Complete | 1 |
239-6562 Engine Ar-Complete
| 23***61 | Pulley Group-Engine | 1 |
| 23***62 | Engine Ar-Complete | 1 |
| 23***63 | Engine Ar | 1 |
239-6564 Installation Ar-Engine
| 10***13 | Air Cleaner & Mounting Group | 1 |
| 17***60 | Lines Group-Muffler Drain | 1 |
| 17***61 | Lines Group-Engine Oil Drain | 1 |
Frame And Body
244-8039 Box & Mtg Gp-Storage
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 4 |
244-8040 Box Gp-Storage
| 12***99 | Liner | 1 |
| 16***02 | Liner | 1 |
| 20***30 | Liner | 1 |
271-0025 Counterweight Gp
| 24***49 | Insulation | 3 |
| 24***50 | Insulation | 1 |
| 24***51 | Insulation | 1 |
271-0024 Counterweight Gp
| 17***15 | Bumper | 1 |
| 17***39 | Liner | 1 |
| 24***78 | Liner | 2 |
298-2983 Cover As-Access -Fuel, Hydraulic Tanks
| 24***59 | Insulation | 1 |
| 24***60 | Insulation | 1 |
| 24***61 | Insulation | 1 |
248-9248 Cover As-Sound Suppression -Air Cleaner
| 17***15 | Bumper | 1 |
| 17***39 | Liner | 1 |
| 24***78 | Liner | 2 |
268-0525 Cover As-Sound Suppression -Fuel, Hydraulic Tanks
| 16***76 | Hinge | 2 |
| 20***89 | Cushion | 1 |
| 23***48 | Insulation | 1 |
248-9258 Cover As-Sound Suppression -Main Control Valve
| 16***76 | Hinge | 2 |
| 20***89 | Cushion | 1 |
| 23***48 | Insulation | 1 |
298-2981 Door As-Access -Air Cleaner
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***76 | Hinge | 2 |
| 17***58 | Insulation | 1 |
268-0518 Door As-Access -Air Cleaner
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 16***76 | Hinge | 2 |
293-6649 Door Gp-Access -Radiator
| 13***73 | Bolt As; (M12x1.75x25-mm) | 2 |
| 23***98 | Step As | 1 |
| 23***02 | Spacer; (15x35x11-mm Thk) | 2 |
268-0521 Door Gp-Access -Radiator
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 16***76 | Hinge | 2 |
268-0528 Door Gp-Access -Pump Compartment
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 17***58 | Insulation | 1 |
| 18***62 | Cover | 1 |
293-6651 Door Gp-Access -Pump Compartment
| 09***83 | Shim (1.0 mm Thick) | 4 |
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
244-8041 Fender & Cover Gp -With Step
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 24***41 | Fender & Cover Group; -With Step | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
244-4219 Frame Gp-Upper
| 14***91 | Gear & Bearing Group-Swing | 1 |
| 22***83 | Gear & Bearing Group-Swing | 1 |
| 22***42 | Gear & Bearing Group-Swing | 1 |
148-4691 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 14***91 | Gear & Bearing Group-Swing | 1 |
| 22***71 | Seal; (Dust) | 1 |
227-6142 Gear & Bearing Gp-Swing
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 38 |
| 16***23 | Sheet | 1 |
| 22***42 | Gear & Bearing Group-Swing | 1 |
227-6153 Gear & Bearing Gp-Swing
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 42 |
| 16***54 | Plate As | 1 |
| 17***46 | Plate As | 1 |
227-6083 Gear & Bearing Gp-Swing
| 08***11 | Spacer; (20.6x38x6-mm Thk) | 37 |
| 09***02 | Pin, Dowel | 1 |
| 11***26 | Bolt; (M20x2.5x110-mm) | 37 |
227-6082 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 22***71 | Seal; (Dust) | 1 |
| 22***82 | Gear & Bearing Group-Swing | 1 |
244-7969 Guard Gp-Bottom -Heavy-Duty
| 13***80 | Plate As | 1 |
| 13***82 | Plate As | 1 |
| 24***69 | Guard Group-Bottom; -Heavy-Duty | 1 |
244-7968 Guard Gp-Bottom
| 13***76 | Plate As | 1 |
| 13***78 | Plate As | 1 |
| 24***68 | Guard Group-Bottom | 1 |
134-8879 Guard Gp-Swivel
| 13***79 | Guard Group-Swivel | 1 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 2 |
| 13***78 | Bolt As; (M12x1.75x40-mm) | 3 |
134-8875 Guard Gp-Swivel
| 13***75 | Guard Group-Swivel | 1 |
| 16***98 | Handle | 1 |
| 22***62 | Seal | 4 |
249-7108 Handrail Gp -Cab
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 09***74 | Pin; (Cotter) | 4 |
256-1644 Handrail Gp -Chassis
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 09***74 | Pin; (Cotter) | 4 |
244-7965 Hood & Guard Gp
| 05***88 | Washer; (13.5x30x3-mm Thk) | 2 |
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
244-7966 Hood Gp -Pre-Cleaner
| 09***00 | Washer; (1.5mm Thk) | 26 |
| 18***66 | Cover | 1 |
| 18***67 | Cover | 1 |
268-0531 Hood Gp-Engine
| 26***22 | Insulator; (Heat) | 1 |
| 26***23 | Insulator; (Heat) | 1 |
| 26***24 | Insulator; (Heat) | 1 |
222-8220 Insulation Gp-Heat
| 22***20 | Insulation Group-Heat | 1 |
| 24***26 | Liner | 1 |
| 24***27 | Liner | 1 |
266-6315 Insulation Gp-Heat
| 24***38 | Insulation | 1 |
| 24***39 | Liner | 1 |
| 26***15 | Insulation Group-Heat | 1 |
248-9235 Sheet As-Sound Suppression
| 10***05 | Step | 4 |
| 24***35 | Sheet As-Sound Suppression | 1 |
| 7X***22 | Washer; (13x24x2.5-mm Thk) | 16 |
248-9192 Sheet As-Sound Suppression
| 24***92 | Sheet As-Sound Suppression | 1 |
| 24***11 | Insulation | 1 |
| 24***12 | Insulation | 1 |
248-9226 Sheet As-Sound Suppression
| 24***26 | Sheet As-Sound Suppression | 1 |
| 27***20 | Liner | 1 |
| 27***21 | Liner | 1 |
248-9121 Sheet As-Sound Suppression
| 24***21 | Sheet As-Sound Suppression | 1 |
| 24***63 | Insulation | 1 |
| 24***64 | Insulation | 1 |
248-9128 Sheet As-Sound Suppression
| 24***28 | Sheet As-Sound Suppression | 1 |
| 24***87 | Liner | 1 |
| 24***88 | Insulation | 1 |
248-9186 Sheet As-Sound Suppression
| 24***86 | Sheet As-Sound Suppression | 1 |
| 24***02 | Insulation | 1 |
| 24***03 | Insulation | 1 |
248-9162 Sheet As-Sound Suppression
| 24***62 | Sheet As-Sound Suppression | 1 |
| 24***94 | Liner | 1 |
| 24***95 | Liner | 1 |
248-9220 Sheet As-Sound Suppression
| 24***20 | Sheet As-Sound Suppression | 1 |
| 24***36 | Insulation | 1 |
| 24***37 | Insulation | 1 |
248-9201 Sheet As-Sound Suppression
| 24***01 | Sheet As-Sound Suppression | 1 |
| 24***21 | Insulation | 1 |
| 24***22 | Insulation | 1 |
248-9210 Sheet As-Sound Suppression
| 24***10 | Sheet As-Sound Suppression | 1 |
| 24***27 | Insulation | 1 |
| 24***28 | Insulation | 1 |
270-9818 Sheet As-Sound Suppression
| 09***14 | Ring, Back-Up | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 09***21 | Seal-Lip Type | 1 |
128-4232 Step Gp
| 09***14 | Ring, Back-Up | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 09***21 | Seal-Lip Type | 1 |
Fuel System
309-5900 Control Ar-Governor
| 09***25 | Plug | 1 |
| 09***26 | Bolt; (M14x1.5x26-mm) | 2 |
| 09***38 | Washer; (7.8x13.5x2-mm Thk) | 1 |
260-2190 Control Gp-Governor
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 9 |
| 14***62 | Separator Group-Water | 1 |
212-8560 Filter Gp-Fuel
| 09***35 | Cap | 1 |
| 09***81 | Clamp | 8 |
| 09***96 | Clamp | 2 |
244-7967 Lines Gp-Fuel
| 08***75 | Nut | 1 |
| 09***28 | Spring | 1 |
| 09***78 | Pin | 2 |
212-8558 Lines Gp-Fuel Injection
| 08***75 | Nut | 1 |
| 09***28 | Spring | 1 |
| 09***78 | Pin | 2 |
212-8470 Nozzle Gp-Unit Injector
| 11***28 | Seal | 1 |
| 12***38 | Housing; (Receptacle) | 1 |
| 12***39 | Terminal; (Male) | 2 |
233-1161 Nozzle Gp-Unit Injector
| 23***61 | Nozzle Group-Unit Injector | 1 |
| 23***70 | Wiring Group-Refueling Pump; -Refueling | 1 |
| 27***02 | Pump Group-Fuel Transfer | 1 |
234-3343 Pump & Motor Gp-Refueling
| 08***19 | Shim (1.00mm Thick) | 1 |
| 08***20 | Shim (1.40mm Thick) | 1 |
| 08***23 | Bearing | 2 |
279-1601 Pump Ar-Fuel Transfer
| 08***19 | Shim (1.00mm Thick) | 1 |
| 08***20 | Shim (1.40mm Thick) | 1 |
| 08***23 | Bearing | 2 |
279-7861 Pump Gp-Fuel Injection
| 10***01 | Connector-Hose | 1 |
| 12***14 | Film-Instruction; (Refueling Pump) | 1 |
| 12***21 | Cover | 1 |
212-8559 Pump Gp-Fuel Injection
| 08***22 | Adapter | 1 |
| 08***88 | Eye Bolt | 1 |
| 08***99 | Eye Bolt | 1 |
255-2969 Pump Gp-Fuel Priming
| 10***01 | Connector-Hose | 1 |
| 12***14 | Film-Instruction; (Refueling Pump) | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
279-1602 Pump Gp-Fuel Transfer
| 11***01 | Bowl As-Water Collection | 1 |
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
171-9091 Separator Gp-Water
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 17***91 | Separator Group-Water; -With Bowl & Water Sensor | 1 |
| 17***87 | Spacer; (17x35x56.5-mm Thk) | 4 |
145-8862 Separator Gp-Water
| 14***62 | Separator Group-Water | 1 |
| 17***91 | Separator Group-Water; -With Bowl & Water Sensor | 1 |
178-6606 Separator Gp-Water
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
244-7956 Tank & Mtg Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 24***56 | Tank & Mtg Group-Fuel | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
244-7957 Tank Gp-Fuel
| 08***29 | Nut Set | 1 |
| 09***13 | Nut Set | 1 |
| 13***81 | Plate | 1 |
Hydraulic System
180-9419 Accumulator Gp-Hydraulic -Uncharged
| 18***19 | Accumulator Group-Hydraulic; -Uncharged | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 16***79 | Cap; (Accumulator) | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 24***61 | Film Group; -Smartboom | 1 |
| 25***13 | Wiring Group-Cab; -Boom Float | 1 |
199-7447 Accumulator Gp-Hydraulic -Uncharged
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 13***28 | Shim; (0.1-mm Thk) | 1 |
| 13***31 | Packing | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 2 |
164-6981 Accumulator Gp-Hydraulic -Charged
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
173-3503 Base Gp-Oil Filter -Hydraulic
| 17***03 | Base Group-Oil Filter; -Hydraulic | 1 |
| 24***11 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
255-5844 Control Ar-Auxiliary -Joystick, 3-Button, Trigger Switch
| 25***44 | Control Ar-Auxiliary; -Joystick, 3-Button, Trigger Switch | 1 |
| 25***81 | Wiring Group-Auxiliary Control; -System 16, 1-Way, 2-Pump | 1 |
| 26***65 | Lines Group-Pilot | 1 |
259-7620 Control Ar-Auxiliary -System 17, Combined Fn, Med Pr
| 20***65 | Pump & Mounting Group; (Auxiliary) | 1 |
| 25***20 | Control Ar-Auxiliary; -System 17, Combined Fn, Med Pr | 1 |
| 26***73 | Lines Group-Pump; -Cooler, Pilot Oil | 1 |
270-5687 Control Ar-Auxiliary -Joystick, 2-Bn, Slide, Trig Sw
| 23***82 | Kit-Repair; (Quick Disconnect) | 1 |
| 24***61 | Coupling As | 2 |
| 27***87 | Control Ar-Auxiliary; -Joystick, 2-Bn, Slide, Trig Sw | 1 |
240-3876 Control Ar-Auxiliary -Boom Float
| 23***96 | Control Group-Foot; -Work Tool | 1 |
| 24***76 | Control Ar-Auxiliary; -Boom Float | 1 |
| 24***65 | Film Group; -Hammer Control, Foot Switch | 1 |
259-7622 Control Ar-Auxiliary -Cooling
| 25***22 | Control Ar-Auxiliary; -Cooling System | 1 |
| 26***42 | Wiring Group-Cab; -Quick Coupler | 1 |
| 26***46 | Wiring Group-Quick Coupler | 1 |
255-5846 Control Ar-Auxiliary -Hammer, Foot Switch
| 25***46 | Control Ar-Auxiliary; -Hammer, Foot Switch | 1 |
| 25***82 | Wiring Group-Auxiliary Control; -System 17, Combined Fn, Med Pr | 1 |
| 26***67 | Lines Group-Pilot; -1-Pump/2-Pump, 1-Way/2-Way Flw | 1 |
259-7621 Control Ar-Auxiliary -Medium Pressure
| 24***65 | Film Group; -Hammer Control, Foot Switch | 1 |
| 25***94 | Fastener Group-Wiring Harness; -Foot Switch | 1 |
| 25***21 | Control Ar-Auxiliary; -Medium Pressure | 1 |
259-7619 Control Ar-Auxiliary -System 16, 1-Way, 2-Pump
| 20***65 | Pump & Mounting Group; (Auxiliary) | 1 |
| 25***83 | Wiring Group-Medium Pressure | 1 |
| 25***19 | Control Ar-Auxiliary; -1-Pump/2-Pump, 1-Way Flow | 1 |
270-6106 Control Ar-Auxiliary -Foot Switch
| 17***66 | Hub | 1 |
| 27***06 | Control Ar-Auxiliary; -Left Foot Switch | 1 |
| 7Y***66 | Setscrew-Socket; (M16x2x22-mm) | 2 |
268-6819 Control Ar-Coupler
| 16***10 | Coupling Group-Flexible | 1 |
| 19***87 | Bolt-Socket Head; (M16x2x60-mm) | 4 |
| 26***19 | Control Ar-Coupler | 1 |
239-6692 Coupler Gp-Quick Disconnect
| 11***02 | Lines Group-Boom Cylinder; -Lh | 1 |
| 23***92 | Coupler Group-Quick Disconnect | 1 |
| 24***39 | Cylinder & Seal Group-Boom | 1 |
162-6210 Coupling Gp-Flexible
| 11***03 | Lines Group-Boom Cylinder; -Rh | 1 |
| 16***10 | Coupling Group-Flexible | 1 |
| 24***39 | Cylinder & Seal Group-Boom | 1 |
162-6177 Coupling Gp-Pump
| 11***02 | Lines Group-Boom Cylinder; -Lh | 1 |
| 16***77 | Coupling Group-Pump | 1 |
| 28***24 | Cylinder & Seal Group-Boom | 1 |
289-7923 Cylinder & Lines Gp-Boom -Rh
| 24***26 | Lines Group-Bucket Cylinder | 1 |
| 28***23 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 28***47 | Cylinder & Seal Group-Bucket | 1 |
289-7922 Cylinder & Lines Gp-Boom -Lh
| 24***61 | Cylinder & Seal Group-Bucket | 1 |
| 24***26 | Lines Group-Bucket Cylinder | 1 |
| 28***22 | Cylinder & Lines Group-Boom; -Lh | 1 |
242-6742 Cylinder & Lines Gp-Boom -Rh
| 22***77 | Cylinder & Seal Group-Bucket | 1 |
| 22***73 | Lines Group-Bucket Cylinder | 1 |
| 24***42 | Cylinder & Lines Group-Boom; -Rh | 1 |
242-6738 Cylinder & Lines Gp-Boom -Lh
| 11***03 | Lines Group-Boom Cylinder; -Rh | 1 |
| 24***38 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 28***24 | Cylinder & Seal Group-Boom | 1 |
289-8002 Cylinder & Lines Gp-Bucket
| 16***94 | Seal; (Id=79.85mm) | 4 |
| 24***64 | Cylinder Group-Boom | 1 |
| 28***02 | Cylinder & Lines Group-Bucket; -Cb2-Family | 1 |
242-6760 Cylinder & Lines Gp-Bucket
| 24***41 | Cylinder & Seal Group-Stick | 1 |
| 24***60 | Cylinder & Lines Group-Bucket; -B1-Family | 1 |
| 24***25 | Lines Group-Stick Cylinder | 1 |
225-4576 Cylinder & Lines Gp-Bucket
| 22***76 | Cylinder & Lines Group-Bucket; -Cb2-Family | 1 |
| 22***73 | Lines Group-Bucket Cylinder | 1 |
| 28***03 | Cylinder & Seal Group-Bucket | 1 |
289-7946 Cylinder & Lines Gp-Bucket
| 24***25 | Lines Group-Stick Cylinder | 1 |
| 28***32 | Cylinder & Seal Group-Stick | 1 |
| 28***46 | Cylinder & Lines Group-Bucket; -B1-Family | 1 |
289-7931 Cylinder & Lines Gp-Stick
| 16***94 | Seal; (Id=79.85mm) | 4 |
| 28***25 | Cylinder Group-Boom | 1 |
| 28***31 | Cylinder & Lines Group-Stick | 1 |
242-6740 Cylinder & Lines Gp-Stick
| 24***40 | Cylinder & Lines Group-Stick | 1 |
| 27***14 | Cylinder Group-Boom | 1 |
| 7X***03 | Seal (Id=90.00mm); (Od=106.15mm) | 4 |
279-8709 Cylinder & Seal Gp-Boom
| 16***94 | Seal; (Id=79.85mm) | 2 |
| 23***79 | Seal; (Lip Type) (69.85mm Id) | 2 |
| 24***67 | Cylinder Group-Bucket | 1 |
289-7924 Cylinder & Seal Gp-Boom
| 16***94 | Seal; (Id=79.85mm) | 2 |
| 23***79 | Seal; (Lip Type) (69.85mm Id) | 2 |
| 28***24 | Cylinder & Seal Group-Boom | 1 |
242-6739 Cylinder & Seal Gp-Boom
| 16***95 | Seal; (Id=93.00mm) | 2 |
| 22***78 | Cylinder Group-Bucket | 1 |
| 23***79 | Seal; (Lip Type) (69.85mm Id) | 2 |
289-8003 Cylinder & Seal Gp-Bucket
| 08***07 | Stop | 1 |
| 08***10 | Ring; (Back Up) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
225-4577 Cylinder & Seal Gp-Bucket
| 16***95 | Seal; (Id=93.00mm) | 2 |
| 22***77 | Cylinder & Seal Group-Bucket | 1 |
| 23***79 | Seal; (Lip Type) (69.85mm Id) | 2 |
242-6761 Cylinder & Seal Gp-Bucket
| 16***94 | Seal; (Id=79.85mm) | 4 |
| 24***61 | Cylinder & Seal Group-Bucket | 1 |
| 24***65 | Cylinder Group-Stick | 1 |
289-7947 Cylinder & Seal Gp-Bucket
| 16***94 | Seal; (Id=79.85mm) | 4 |
| 28***33 | Cylinder Group-Stick | 1 |
| 28***47 | Cylinder & Seal Group-Bucket | 1 |
242-6741 Cylinder & Seal Gp-Stick
| 08***05 | Stop | 1 |
| 08***50 | Ring; (Back Up) | 1 |
| 09***29 | Ring; (Retaining) | 2 |
289-7932 Cylinder & Seal Gp-Stick
| 08***07 | Stop | 1 |
| 08***10 | Ring; (Back Up) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
279-5614 Cylinder Gp-Boom
| 08***10 | Ring; (Back Up) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
| 11***56 | Bearing; (Sleeve) | 1 |
289-7925 Cylinder Gp-Boom
| 08***10 | Ring; (Back Up) | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 1 |
| 11***56 | Bearing; (Sleeve) | 1 |
242-6764 Cylinder Gp-Boom
| 09***82 | Seal-O-Ring | 1 |
| 12***60 | Bearing; (Sleeve) | 1 |
| 16***88 | Seal; (Lip Type) | 1 |
242-6767 Cylinder Gp-Bucket
| 08***31 | Stop | 1 |
| 08***34 | Head | 1 |
| 08***36 | Ring-Backup | 1 |
289-8004 Cylinder Gp-Bucket
| 08***31 | Stop | 1 |
| 08***34 | Head | 1 |
| 08***36 | Ring-Backup | 1 |
289-7948 Cylinder Gp-Bucket
| 08***31 | Stop | 1 |
| 08***34 | Head | 1 |
| 08***36 | Ring-Backup | 1 |
225-4578 Cylinder Gp-Bucket
| 09***82 | Seal-O-Ring | 1 |
| 12***60 | Bearing; (Sleeve) | 1 |
| 16***88 | Seal; (Lip Type) | 1 |
169-0329 Cylinder Gp-Coupler
| 09***29 | Ring; (Retaining) | 2 |
| 09***84 | Washer; (40.3x72x1-mm Thk) | 6 |
| 09***11 | Washer; (47.3x76x1-mm Thk) | 6 |
289-7933 Cylinder Gp-Stick
| 09***55 | Pin | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 28***33 | Cylinder Group-Stick | 1 |
242-6765 Cylinder Gp-Stick
| 11***98 | Gauge-Oil Level; (Swing Drive) | 1 |
| 11***99 | Pipe; (Gauge) | 1 |
| 14***44 | Drive Group-Swing; -Without Motor | 1 |
148-4679 Drive Gp-Swing -With Motor
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
148-4644 Drive Gp-Swing -Without Motor
| 14***44 | Drive Group-Swing; -Without Motor | 1 |
| 18***84 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 28***36 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
227-6168 Fastener Gp-Swing & Final Dr
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
273-2187 Fastener Gp-Swing & Final Dr
| 12***03 | Seal-O-Ring (Id=185mm) | 2 |
| 12***34 | Valve As-Bypass | 1 |
| 15***84 | Seal-O-Ring | 1 |
289-7836 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 28***36 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 28***95 | Head As-Filter | 1 |
188-2084 Filter & Valve Gp-Pilot -Hydraulic Oil
| 14***49 | Filter Element As-Oil; (Standard Efficiency) | 1 |
| 15***38 | Seal-O-Ring | 1 |
| 15***39 | Seal-O-Ring | 1 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***81 | Seal-O-Ring | 1 |
| 13***23 | Seal-O-Ring | 4 |
| 13***24 | Screw; (M3x0.5x5-mm) | 8 |
188-4140 Filter Gp-Oil -Hydraulic Return
| 14***35 | Connect Group; (Each Includes) | 1 |
| 18***40 | Filter Group-Oil; -Hydraulic, Return | 1 |
| 21***00 | Flange As | 1 |
250-0728 Filter Gp-Oil -Hydraulic
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 23***57 | Pipe | 1 |
| 23***58 | Block | 2 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 11***34 | Tee-O-Ring | 1 |
| 18***42 | Filter Group-Oil; -Hydraulic Return | 1 |
| 21***01 | Tee As; (Fabricated Tee) | 1 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 11 |
214-4511 Fitting Gp-Hydraulic -4-Bolt Flange
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 7 |
214-4512 Fitting Gp-Hydraulic
| 16***60 | Hose Group-Hydraulic; (Control Valve, Stick) | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 21***12 | Fitting Group-Hydraulic | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 14***65 | Tube As | 1 |
| 16***65 | Hose As | 1 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
256-0093 Head Gp-Pump -Drive
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 19***82 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 25***93 | Head Group-Pump; -Drive | 1 |
256-0096 Head Gp-Pump -Driven
| 16***62 | Hose As | 1 |
| 25***96 | Head Group-Pump; -Driven | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
194-0181 Hose Gp-Hydraulic -Control Valve, Boom
| 14***64 | Tube As | 1 |
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
194-0182 Hose Gp-Hydraulic
| 19***82 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 23***52 | Pump & Mtg Group-Main Hydraulic | 1 |
| 24***39 | Tank & Mtg Group-Hydraulic; -Hydraulic | 1 |
260-7910 Hose Gp-Hydraulic -Front
| 23***52 | Pump & Mtg Group-Main Hydraulic | 1 |
| 24***39 | Tank & Mtg Group-Hydraulic; -Hydraulic | 1 |
| 24***25 | Lines Group-Pilot; -Joystick, Pedals | 1 |
194-0176 Hose Gp-Hydraulic
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 26***11 | Hose Group-Hydraulic; -Front | 1 |
| 26***13 | Hose Group-Hydraulic; -Front | 1 |
194-0180 Hose Gp-Hydraulic -Control Valve, Boom
| 19***80 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 26***12 | Hose As | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
194-0174 Hose Gp-Hydraulic -Control Valve, Stick
| 11***79 | Flange-Special | 1 |
| 16***73 | Hose As | 1 |
| 16***23 | Tube As | 1 |
260-7913 Hose Gp-Hydraulic
| 12***80 | Tube As | 1 |
| 14***82 | Tube As | 1 |
| 17***16 | Clamp-Half | 4 |
260-7911 Hose Gp-Hydraulic
| 26***11 | Hose Group-Hydraulic; -Front | 1 |
| 27***55 | Lines Group-Filter | 1 |
239-8835 Hydraulic Ar
| 12***80 | Tube As | 1 |
| 14***82 | Tube As | 1 |
| 17***16 | Clamp-Half | 4 |
269-5174 Hydraulic Ar
| 12***07 | Grommet | 1 |
| 12***08 | Clip | 2 |
| 12***74 | Grommet | 1 |
273-6369 Hydraulic Ar-Fine Filtration
| 09***91 | Clamp, Single | 4 |
| 15***67 | Clip; (Slot) | 2 |
| 17***95 | Clip | 4 |
242-6475 Lines Gp-Auxiliary Hydraulic -Boom, High Pressure
| 17***16 | Clamp-Half | 4 |
| 17***92 | Valve Group-Manual; -Auxiliary, Shutoff | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
242-6476 Lines Gp-Auxiliary Hydraulic -Boom, Medium Pressure
| 14***38 | Clip | 4 |
| 18***77 | Plate | 2 |
| 18***78 | Support As | 1 |
245-2399 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 14***52 | Union As | 2 |
| 17***30 | Clip | 6 |
| 20***15 | Plate | 1 |
242-6492 Lines Gp-Auxiliary Hydraulic -Stick, Medium Pressure
| 11***49 | Hose As | 1 |
| 14***57 | Union Bulkhead; (Orfs) | 1 |
| 14***52 | Union As | 2 |
237-3184 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 09***91 | Clamp, Single | 2 |
| 15***67 | Clip; (Slot) | 2 |
| 17***95 | Clip | 4 |
242-6488 Lines Gp-Auxiliary Hydraulic -Stick, Medium Pressure
| 14***38 | Clip | 4 |
| 18***77 | Plate | 2 |
| 18***55 | Tube As | 2 |
253-6591 Lines Gp-Auxiliary Hydraulic -Stick, Medium Pressure
| 09***94 | Clamp, Double | 1 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
| 11***84 | Hose As | 1 |
242-6487 Lines Gp-Auxiliary Hydraulic -Stick, High Pressure
| 13***63 | Flange; (Mkb 1400n, 1600n) | 2 |
| 17***92 | Valve Group-Manual; -Auxiliary, Shutoff | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
242-6505 Lines Gp-Boom -Reach Boom, Stick Lowering Control
| 09***94 | Clamp, Double | 1 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
| 11***84 | Hose As | 1 |
269-3891 Lines Gp-Boom -Variable Adj, Quick Coupler
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
| 1P***65 | Split Flange; (Half) | 4 |
269-3808 Lines Gp-Boom -Variable Adjustable
| 13***27 | Hose As | 1 |
| 14***66 | Elbow Group | 2 |
| 14***77 | Elbow As. | 2 |
269-3890 Lines Gp-Boom -Stick Lowering, Var Adj Boom
| 11***21 | Support As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***41 | Connector Group | 2 |
269-3889 Lines Gp-Boom -Variable Adj, High Pressure
| 11***20 | Support As | 1 |
| 11***21 | Support As | 1 |
| 11***36 | Tube As | 1 |
269-3888 Lines Gp-Boom -Medium Pressure
| 11***20 | Support As | 1 |
| 11***21 | Support As | 1 |
| 11***34 | Tube As | 1 |
260-8010 Lines Gp-Boom
| 12***09 | Clip | 4 |
| 12***16 | Plate | 2 |
| 12***17 | Plate | 2 |
266-0983 Lines Gp-Boom Cylinder -Boom Lowering Control
| 11***21 | Support As | 1 |
| 11***23 | Support As | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
115-8903 Lines Gp-Boom Cylinder -Rh
| 11***03 | Lines Group-Boom Cylinder; -Rh | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
| 23***97 | Tube As | 1 |
115-8902 Lines Gp-Boom Cylinder -Lh
| 11***02 | Lines Group-Boom Cylinder; -Lh | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
227-0573 Lines Gp-Bucket Cylinder
| 13***80 | Clip | 2 |
| 15***39 | Plate | 1 |
| 22***73 | Lines Group-Bucket Cylinder | 1 |
248-9926 Lines Gp-Bucket Cylinder
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
| 24***26 | Lines Group-Bucket Cylinder | 1 |
187-5975 Lines Gp-Bucket Cylinder
| 17***26 | Hose As | 1 |
| 17***27 | Hose As | 1 |
| 18***75 | Lines Group-Bucket Cylinder | 1 |
260-8011 Lines Gp-Bucket Cylinder
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
| 21***66 | Hose As | 2 |
187-5693 Lines Gp-Bucket Cylinder
| 18***93 | Lines Group-Bucket Cylinder | 1 |
| 18***58 | Hose As | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
271-2897 Lines Gp-Coupler -Cb-Family
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
242-6490 Lines Gp-Coupler
| 14***84 | Elbow As | 2 |
| 14***19 | Reducer As | 1 |
| 24***90 | Lines Group-Coupler; -Stick | 1 |
253-6592 Lines Gp-Coupler
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***50 | Clamp | 1 |
242-6478 Lines Gp-Coupler -Reach Boom
| 14***84 | Elbow As | 2 |
| 14***19 | Reducer As | 1 |
| 24***78 | Lines Group-Coupler; -Reach Boom | 1 |
173-5229 Lines Gp-Coupler
| 14***15 | Reducer Group | 1 |
| 14***19 | Reducer As | 1 |
| 17***29 | Lines Group-Coupler; -B-Family | 1 |
277-0475 Lines Gp-Coupler -B-Family
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
242-6494 Lines Gp-Coupler
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 4 |
| 10***03 | Bolt; (Socket Head) (M10x1.5x80mm) | 2 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 42 |
266-0969 Lines Gp-Front -Medium Pressure
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***50 | Clamp | 2 |
| 14***57 | Elbow As. | 1 |
269-9894 Lines Gp-Front -Variable Adjustable Boom
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
269-9563 Lines Gp-Front -Quick Coupler
| 09***32 | Seal-O-Ring (Id=28.24mm) | 2 |
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 4 |
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 4 |
266-0968 Lines Gp-Front -Auxiliary
| 08***62 | Hose As | 1 |
| 08***78 | Hose As-Lines From Selector Valve To | 1 |
| 10***26 | Hose As; (Nom 06, L=2480mm) | 1 |
266-0958 Lines Gp-Front -Boom, Swing
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***69 | Adapter Assembly | 1 |
| 18***89 | Hose As | 2 |
272-4362 Lines Gp-Front -System 16, Auxiliary
| 08***02 | Hose As. | 1 |
| 08***66 | Hose As | 1 |
| 12***03 | Valve Group-Solenoid; -Variable Adjustable Boom | 1 |
266-0957 Lines Gp-Front
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***69 | Adapter Assembly | 1 |
| 18***89 | Hose As | 2 |
266-0960 Lines Gp-Hydraulic Oil Cooler
| 08***03 | Hose As (Nom 06, L=2300mm) | 2 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 2 |
| 11***45 | Guard | 2 |
266-0963 Lines Gp-Pilot -Control Valve
| 08***56 | 90 Degrees Elbow | 1 |
| 08***02 | Hose As. | 2 |
| 08***82 | Hose As (Nom 06, L=400mm) | 2 |
266-0965 Lines Gp-Pilot
| 08***61 | Hose As | 1 |
| 10***02 | Hose As | 1 |
| 12***08 | Guard | 1 |
275-1495 Lines Gp-Pilot -Cab
| 10***81 | Spacer; (13.5x25x40-mm Thk) | 1 |
| 10***15 | Elbow Group | 1 |
| 14***39 | Connector As. | 1 |
255-1659 Lines Gp-Pilot -Heavy Lift
| 08***56 | 90 Degrees Elbow | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 14***89 | Hose As (Nom 19, L=410mm) | 1 |
248-9825 Lines Gp-Pilot -Joystick, Pedals
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
| 08***34 | Hose As | 1 |
269-9826 Lines Gp-Pilot -To Pilot Valve, Var Adj Boom
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 4 |
269-9827 Lines Gp-Pilot -To Control Valve, Var Adj Boom
| 10***81 | Spacer; (13.5x25x40-mm Thk) | 1 |
| 10***15 | Elbow Group | 1 |
| 14***60 | Elbow Group | 1 |
266-0970 Lines Gp-Pilot -Medium Pressure
| 13***13 | Band; (Marker) (Gray, P) | 2 |
| 13***07 | Strap; (Cable) | 6 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
266-0964 Lines Gp-Pilot -Filter, Pilot Pump
| 08***56 | 90 Degrees Elbow | 1 |
| 08***02 | Hose As. | 2 |
| 08***82 | Hose As (Nom 06, L=400mm) | 2 |
266-0972 Lines Gp-Pilot -Control Valve
| 08***02 | Hose As. | 1 |
| 08***71 | Hose As (Nom 06, L=960mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
266-0976 Lines Gp-Pilot -Boom Float
| 08***02 | Hose As. | 1 |
| 10***31 | Connector-Filter | 1 |
| 12***69 | Fitting-Orfs | 1 |
266-0967 Lines Gp-Pilot -1-Pump/2-Pump, 1-Way/2-Way Flw
| 08***56 | 90 Degrees Elbow | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
| 10***74 | Hose As (Nom 06, L=2200mm) | 1 |
266-0978 Lines Gp-Pilot -Stick Lowering Control
| 11***65 | Guard | 1 |
| 12***49 | Valve Group-Shuttle | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
266-0962 Lines Gp-Pilot -Main Control Valve
| 08***56 | 90 Degrees Elbow | 1 |
| 08***02 | Hose As. | 2 |
| 08***82 | Hose As (Nom 06, L=400mm) | 2 |
266-0959 Lines Gp-Pump -Output
| 10***81 | Spacer; (13.5x25x40-mm Thk) | 1 |
| 10***15 | Elbow Group | 1 |
| 14***05 | Adapter Group | 1 |
266-0971 Lines Gp-Pump
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***24 | Bolt-Socket Head; (M12x1.75x100-mm) | 4 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
266-0961 Lines Gp-Pump -Supply, Main Pump
| 10***81 | Spacer; (13.5x25x40-mm Thk) | 1 |
| 10***15 | Elbow Group | 1 |
| 14***05 | Adapter Group | 1 |
266-0973 Lines Gp-Pump -Cooler, Pilot Oil
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 3 |
| 14***61 | Elbow Group | 2 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
266-0975 Lines Gp-Return -Boom Float
| 09***94 | Clamp, Double | 1 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
| 11***25 | Support As | 1 |
266-0956 Lines Gp-Return -Hydraulic Tank
| 09***94 | Clamp, Double | 2 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
| 11***25 | Support As | 2 |
266-0977 Lines Gp-Sensor -Overload Warning
| 10***18 | Grommet | 4 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 14***72 | Elbow Group | 1 |
273-3138 Lines Gp-Stick Cylinder -Stick Lowering, Var Adj Boom
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
248-9925 Lines Gp-Stick Cylinder
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 24***25 | Lines Group-Stick Cylinder | 1 |
242-6503 Lines Gp-Stick Cylinder -Load Control
| 10***18 | Grommet | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
269-5175 Lines Gp-Travel Motor
| 15***86 | Motor Group-Swing | 1 |
| 26***75 | Lines Group-Travel Motor | 1 |
| 6V***00 | Ring; (Retaining) (M35x1.5mm) | 1 |
266-0980 Lines Gp-Travel Motor -Long Narrow Undercarriage
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
239-8998 Manifold Gp-Control -Pilot Oil Supply
| 17***52 | Valve Group-Relief | 2 |
| 19***42 | Motor Group-Swing; -Swing | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
215-5037 Manifold Gp-Control -Pilot Oil Supply
| 09***07 | Bolt; (M16x2x120-mm) | 3 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
| 21***37 | Manifold Group-Control; -Pilot Oil Supply | 1 |
239-8697 Manifold Gp-Control -Pilot Oil Supply
| 09***07 | Bolt; (M16x2x120-mm) | 3 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
| 20***92 | Motor Group-Piston; -Travel | 1 |
158-8985 Motor & Mtg Gp-Swing
| 09***00 | Plug | 2 |
| 09***82 | Pin-Spring | 2 |
| 09***95 | Seal-O-Ring (Id=27.70mm) | 2 |
204-2674 Motor & Mtg Gp-Travel
| 08***42 | Valve | 1 |
| 08***43 | Stopper | 2 |
| 08***57 | Piston | 2 |
215-9982 Motor & Mtg Gp-Travel
| 08***42 | Valve | 1 |
| 08***43 | Stopper | 2 |
| 08***57 | Piston | 2 |
209-5992 Motor Gp-Piston -Travel
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 8 |
| 19***11 | Washer; (17x40x8-mm Thk) | 4 |
| 20***92 | Motor Group-Piston; -Travel | 1 |
158-8986 Motor Gp-Swing
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***48 | Plug Group-Control Valve | 1 |
191-5542 Motor Gp-Swing
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 2 |
| 19***42 | Motor Group-Swing; -Swing | 1 |
| 20***26 | Spacer | 1 |
215-9952 Motor Gp-Travel
| 16***77 | Coupling Group-Pump | 1 |
| 21***52 | Motor Group-Travel | 1 |
| 27***55 | Pump Group-Main Hydraulic; -Double | 1 |
260-7868 Mounting Gp-Main Control Valve
| 20***00 | Kit; (Seal) (Gear Pump) (Includes Lip Seal, Retaining Ring, 2 Strips, & 4 Gaskets) | 1 |
| 26***68 | Mounting Group-Main Control Valve | 1 |
| 3G***83 | Seal; (Lip Type) | 1 |
6e-4816 Plug Gp-Control Valve
| 09***75 | Pin, Roller | 7 |
| 09***82 | Plug, Tapered | 16 |
| 09***46 | Ring; (Retaining) | 2 |
200-3365 Pump & Mtg Gp-Auxiliary
| 09***75 | Pin, Roller | 7 |
| 09***82 | Plug, Tapered | 16 |
| 09***46 | Ring; (Retaining) | 2 |
239-6552 Pump & Mtg Gp-Main Hydraulic
| 09***39 | Spring | 1 |
| 12***84 | Rod | 1 |
| 20***00 | Screen As; (Hydraulic Tank) | 1 |
240-2998 Pump Gp-Gear
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 15***82 | Seal | 5 |
272-6955 Pump Gp-Main Hydraulic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 1 |
259-0922 Screen Gp-Hydraulic -Tank
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***22 | Screen Group-Hydraulic; -Tank | 1 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
234-4440 Swivel Gp
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 23***40 | Swivel Group | 1 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
245-5140 Tank & Filter Gp-Hydraulic
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 24***40 | Tank & Filter Group-Hydraulic | 1 |
| 25***78 | Valve Group-Control; -Auxiliary | 2 |
245-5139 Tank & Mtg Gp-Hydraulic
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 24***39 | Tank & Mtg Group-Hydraulic; -Hydraulic | 1 |
| 25***78 | Valve Group-Control; -Auxiliary | 2 |
282-2742 Valve & Mtg Gp-Control
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
| 28***42 | Valve & Mtg Group-Control; -Auxiliary, Main | 1 |
282-2744 Valve & Mtg Gp-Implement Cont
| 09***47 | Seal-O-Ring | 1 |
| 17***09 | Body | 1 |
| 17***13 | Valve As | 1 |
305-4647 Valve & Mtg Gp-Implement Cont
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
| 09***00 | Seal - O-Ring (34.40 mm Id) | 1 |
272-7840 Valve Ar-Load Control -Stick Lowering, Var Adj Boom
| 25***00 | Valve Group-Relief; -Medium Pressure | 2 |
| 25***01 | Valve Group-Relief; -Cushion, Rotator Motor | 2 |
| 27***40 | Valve Ar-Load Control; -Stick Lowering, Var Adj Boom | 1 |
239-8840 Valve Ar-Load Control -Reach Boom, Stick Load Control
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
297-0370 Valve Gp-Check
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
173-4672 Valve Gp-Check -Oil Cooler Bypass
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 17***72 | Valve Group-Check; -Oil Cooler Bypass | 1 |
215-4890 Valve Gp-Check
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
259-7632 Valve Gp-Control -Without Covers, Housings
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
259-7378 Valve Gp-Control -Auxiliary
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
259-7631 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 25***31 | Valve Group-Control; -Without Covers, Housings | 1 |
285-1339 Valve Gp-Control
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 17***32 | Kit-Seal; (Quick Coupler Valve) | 1 |
244-8400 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
254-3080 Valve Gp-Control -Quick Coupler
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
259-7662 Valve Gp-Control -Lh
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 17***32 | Kit-Seal; (Quick Coupler Valve) | 1 |
285-1340 Valve Gp-Control -Without Covers, Housings
| 09***22 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***65 | Spring | 2 |
259-7465 Valve Gp-Control -Rh
| 25***65 | Valve Group-Control; -Front-Rh | 1 |
| 26***03 | Valve Group-Relief; (160-Bar) (2321-Psi) | 2 |
| 28***77 | Valve Group-Relief; (230-Bar) (3336-Psi) | 2 |
308-4745 Valve Gp-Control
| 09***94 | Seal-O-Ring (Id=25.70mm) | 2 |
| 09***89 | Ring, Back-Up | 2 |
| 11***29 | Orifice | 1 |
308-4747 Valve Gp-Control
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
232-4103 Valve Gp-Control -Medium Pressure
| 10***93 | Spring | 3 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
285-1531 Valve Gp-Control -Medium Pressure
| 09***94 | Seal-O-Ring (Id=25.70mm) | 2 |
| 09***89 | Ring, Back-Up | 2 |
| 11***29 | Orifice | 3 |
201-9236 Valve Gp-Flow Control -Boom Float, Pilot Oil
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
225-4785 Valve Gp-Load Control -Boom Cylinder
| 09***87 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***86 | Ring-Back Up; (Backup) | 2 |
| 14***09 | Plug As-Sto | 1 |
308-6964 Valve Gp-Load Control -Stick Cylinder
| 09***83 | Ring-Back Up | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***47 | Handle | 1 |
225-4843 Valve Gp-Load Control -Stick Cylinder
| 09***87 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***86 | Ring-Back Up; (Backup) | 2 |
| 12***98 | Plate | 1 |
255-5683 Valve Gp-Load Control -Boom Drift Red, Line Relief
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***83 | Valve Group-Load Control; -Boom Drift Red, Line Relief | 1 |
255-5680 Valve Gp-Load Control -Stick Drift Red, Line Relief
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***80 | Valve Group-Load Control; -Stick Drift Red, Line Relief | 1 |
270-6739 Valve Gp-Load Control -Stick Cylinder
| 19***47 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 19***48 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 27***39 | Valve Group-Load Control; -Stick Cylinder | 1 |
285-1323 Valve Gp-Main Control -Heavy Lift
| 28***23 | Valve Group-Main Control; -Heavy Lift | 1 |
| 30***66 | Handle | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
259-7602 Valve Gp-Main Control -Heavy Lift
| 11***53 | Handle | 1 |
| 25***02 | Valve Group-Main Control; -Heavy Lift | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
277-0954 Valve Gp-Manual -Auxiliary, Shutoff
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
197-2247 Valve Gp-Manual -Auxiliary, Shutoff
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
173-7992 Valve Gp-Manual -Auxiliary, Shutoff
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
197-2248 Valve Gp-Manual -Auxiliary, Shutoff
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
297-0530 Valve Gp-Pilot -Joystick, Rh
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 10***65 | Body-Valve | 1 |
270-5947 Valve Gp-Pilot -Travel
| 10***89 | Seal-O-Ring | 2 |
| 10***73 | Seal-O-Ring | 2 |
| 14***74 | Valve | 1 |
158-8250 Valve Gp-Pilot -Travel
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 08***09 | Bellows | 2 |
225-4813 Valve Gp-Pilot -Joystick, Rh
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
297-0531 Valve Gp-Pilot -Joystick, Lh
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 10***53 | Body-Valve | 1 |
206-3305 Valve Gp-Pilot -Joystick
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
232-4100 Valve Gp-Pilot -Joystick, Lh
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
232-4102 Valve Gp-Pressure Reducing -Boom, Swing Priority
| 10***67 | Valve Group-Relief; -Negative Flow Control | 1 |
| 15***39 | Cover | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
153-5295 Valve Gp-Priority -Swing
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 15***95 | Valve Group-Priority; (Negative Flow) | 1 |
| 16***65 | Ring-Back Up; (Backup) | 1 |
255-5662 Valve Gp-Relief
| 09***78 | Seal-O-Ring (Id=9.80mm) | 7 |
| 10***79 | Plug | 7 |
| 16***64 | Seat | 6 |
177-2653 Valve Gp-Relief
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
239-8774 Valve Gp-Relief -Main, Heavy Lift
| 12***52 | Connector | 2 |
| 23***74 | Valve Group-Relief; -Main, Heavy Lift | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
259-7601 Valve Gp-Relief -Cushion, Rotator Motor
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
255-5661 Valve Gp-Relief -Line
| 12***11 | Tee-Orfs | 1 |
| 12***52 | Connector | 2 |
| 25***61 | Valve Group-Relief; -Line | 1 |
153-5313 Valve Gp-Relief -Negative Flow Control
| 09***86 | Seal - O-Ring (19.80 mm Id) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
204-2755 Valve Gp-Relief
| 20***55 | Valve Group-Relief; -Crossover | 1 |
222-0084 Valve Gp-Relief
| 22***84 | Valve Group-Relief; -Work Tool | 1 |
173-3452 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
109-5152 Valve Gp-Relief -Negative Flow Control
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
| 22***84 | Valve Group-Relief; -Work Tool | 1 |
259-7600 Valve Gp-Relief -Medium Pressure
| 25***00 | Valve Group-Relief; -Medium Pressure | 1 |
| 25***33 | Connector | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
109-2667 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***85 | Ring; (Back Up) | 1 |
| 10***67 | Valve Group-Relief; -Negative Flow Control | 1 |
310-0394 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
173-3536 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
123-2430 Valve Gp-Shuttle
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 12***30 | Valve Group-Shuttle; (Work Tool) | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
265-0069 Valve Gp-Shuttle
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
123-2549 Valve Gp-Shuttle
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
185-0462 Valve Gp-Shuttle
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
259-7732 Valve Gp-Shuttle
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 17***98 | Valve Group-Shuttle | 2 |
| 18***07 | Kit-Seal; (Shuttle Valve) | 1 |
259-7429 Valve Gp-Solenoid
| 08***38 | Seal-O-Ring | 1 |
| 10***17 | Spring | 1 |
| 10***18 | Ring; (Backup) | 1 |
171-0188 Valve Gp-Solenoid
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
258-6749 Valve Gp-Solenoid
| 24***07 | Valve Group-Solenoid & Relief; -1-Way, 2-Way Flow | 1 |
| 25***49 | Valve Group-Solenoid | 1 |
121-1491 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 2 |
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 4 |
121-6303 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
111-9916 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 2 |
116-3526 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 4 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
| 16***82 | Plate | 1 |
259-7430 Valve Gp-Solenoid
| 09***76 | Seal-O-Ring | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
297-0371 Valve Gp-Solenoid
| 24***82 | Boom Group | 1 |
| 24***86 | Lines Group-Grease; -Boom | 1 |
| 24***38 | Cylinder & Lines Group-Boom; -Lh | 1 |
265-0067 Valve Gp-Solenoid
| 09***45 | Washer; (28.5x37x2-mm Thk) | 2 |
| 20***55 | Valve Group-Relief; -Crossover | 2 |
| 20***56 | Cover | 2 |
185-0472 Valve Gp-Solenoid
| 18***72 | Valve Group-Solenoid; -Boom Float | 1 |
| 26***67 | Valve Group-Solenoid | 1 |
| 26***69 | Valve Group-Shuttle | 1 |
264-9967 Valve Gp-Solenoid & Press Redc -Boom, Swing Priority
| 24***86 | Lines Group-Grease; -Boom | 1 |
| 26***10 | Lines Group-Boom; -1-Piece Long Boom | 1 |
| 26***67 | Valve Group-Solenoid & Press Redc; -Boom, Swing Priority | 1 |
244-8507 Valve Gp-Solenoid & Relief
| 24***07 | Valve Group-Solenoid & Relief; -1-Way, 2-Way Flow | 1 |
| 26***64 | Boom Group-Fore | 1 |
| 26***08 | Lines Group-Boom; -Variable Adjustable | 1 |
244-8506 Valve Gp-Solenoid & Relief
| 24***38 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 24***41 | Cylinder & Seal Group-Stick | 1 |
| 24***42 | Cylinder & Lines Group-Boom; -Rh | 1 |
323-7558 Valve Gp-Solenoid & Relief -With Block
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
323-7559 Valve Gp-Solenoid & Relief
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***16 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***84 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 1 |
204-2819 Valve Gp-Travel Counterbalance
| 09***84 | Shim (1.0 mm Thick) | 4 |
| 09***16 | Shim (2.0 mm Thick) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
Implements
240-3829 Boom Ar
| 24***29 | Boom Ar | 1 |
| 24***04 | Pin As | 2 |
| 7X***52 | Bolt-Plt; (M16 X 2.0 X 30) | 2 |
290-1782 Boom Ar-1 Piece Long -Reach
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 12***26 | Hose As | 1 |
| 16***79 | Clip | 3 |
300-9756 Boom Ar-Variable Adjustable
| 24***60 | Cylinder & Lines Group-Bucket; -B1-Family | 1 |
| 26***88 | Linkage Group-Bucket; -B1-Family, With Lifting Eye | 1 |
| 30***56 | Boom Ar-Variable Adjustable | 1 |
269-5171 Boom Ar-Variable Adjustable
| 03***48 | Clip; (11.11mm .437in Id) | 7 |
| 08***38 | Plate As | 2 |
| 08***40 | Plate | 3 |
241-7282 Boom Gp
| 22***76 | Cylinder & Lines Group-Bucket; -Cb2-Family | 1 |
| 24***82 | Boom Group | 1 |
| 25***97 | Linkage Group-Bucket; -Cb2-Family | 1 |
290-9192 Boom Gp-1 Piece -Long Reach
| 26***88 | Linkage Group-Bucket; -B1-Family, With Lifting Eye | 1 |
| 28***46 | Cylinder & Lines Group-Bucket; -B1-Family | 1 |
| 29***92 | Boom Group-1 Piece; -Long Reach | 1 |
264-1964 Boom Gp-Fore
| 25***97 | Linkage Group-Bucket; -Cb2-Family | 1 |
| 26***64 | Boom Group-Fore | 1 |
| 28***02 | Cylinder & Lines Group-Bucket; -Cb2-Family | 1 |
269-5173 Boom Gp-Stub -Variable Adjustable
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***45 | Seal-O-Ring | 4 |
| 16***87 | Shim; (2-mm Thk) | 2 |
244-8503 Conversion Gp-Linkage
| 09***44 | Seal-O-Ring (Id=140.00mm) | 4 |
| 11***63 | Pin | 2 |
| 16***86 | Shim; (2-mm Thk) | 2 |
241-7286 Lines Gp-Grease -Boom
| 18***75 | Lines Group-Bucket Cylinder | 1 |
| 24***86 | Lines Group-Grease; -Boom | 1 |
| 29***19 | Stick Group-Hoe; -Reach | 1 |
272-2869 Lines Gp-Grease -Variable Adjustable Boom
| 18***93 | Lines Group-Bucket Cylinder | 1 |
| 27***69 | Lines Group-Grease; -Variable Adjustable Boom | 1 |
| 29***10 | Stick Group-Hoe; -Heavy-Duty | 1 |
240-3862 Linkage Ar-Bucket -B1-Family, With Lifting Eye
| 24***62 | Linkage Ar-Bucket; -B1-Family, With Lifting Eye | 1 |
| 26***11 | Lines Group-Bucket Cylinder | 1 |
| 29***16 | Stick Group-Hoe; -Heavy-Duty | 1 |
290-1790 Linkage Ar-Bucket -B1-Family, With Lifting Eye
| 18***93 | Lines Group-Bucket Cylinder | 1 |
| 24***03 | Stick Group-Hoe; -Auxiliary, Coupler | 1 |
| 29***90 | Linkage Ar-Bucket; -B1-Family, With Lifting Eye | 1 |
290-1813 Linkage Ar-Bucket -Cb2-Family, With Lifting Eye
| 24***09 | Stick Group-Hoe; -Heavy-Duty, B-Family | 1 |
| 26***11 | Lines Group-Bucket Cylinder | 1 |
| 29***13 | Linkage Ar-Bucket; -Cb2-Family, With Lifting Eye | 1 |
247-7332 Linkage Ar-Bucket -Cb2-Family, With Lifting Eye
| 18***75 | Lines Group-Bucket Cylinder | 1 |
| 24***12 | Stick Group-Hoe; -Reach | 1 |
| 24***32 | Linkage Ar-Bucket; -Cb2-Family, With Lifting Eye | 1 |
251-2597 Linkage Gp-Bucket -Cb2-Family
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
260-2288 Linkage Gp-Bucket -B1-Family, With Lifting Eye
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
290-1837 Stick Ar -Reach
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
290-1787 Stick Ar -Reach
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
290-1836 Stick Ar -Reach
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
240-3843 Stick Ar-Hoe -Reach
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
240-3851 Stick Ar-Hoe -Reach
| 14***24 | Hose As | 2 |
| 18***83 | Kit-Seal; (Bucket/Clamshell Valve) | 1 |
| 18***84 | Valve-Relief | 1 |
240-3854 Stick Ar-Hoe -Reach
| 14***24 | Hose As | 2 |
| 18***84 | Valve-Relief | 1 |
| 18***85 | Valve-Check | 1 |
290-9210 Stick Gp-Hoe -Reach
| 25***18 | Bucket As-Excavation | 1 |
| 29***10 | Stick Group-Hoe; -Heavy-Duty | 1 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 1 |
241-7303 Stick Gp-Hoe
| 11***63 | Pin | 2 |
| 14***24 | Hose As | 2 |
| 16***95 | Channel | 1 |
290-9216 Stick Gp-Hoe -Reach
| 25***21 | Bucket As-Excavation; -B-Family | 1 |
| 29***16 | Stick Group-Hoe; -Heavy-Duty | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
241-7309 Stick Gp-Hoe
| 08***21 | Shim (0.5mm Thick) | 4 |
| 08***22 | Shim (1.0mm Thick) | 6 |
| 13***48 | Plate | 1 |
241-7312 Stick Gp-Hoe -Reach
| 08***74 | Pin | 1 |
| 08***75 | Shim (0.5mm Thick) | 4 |
| 08***76 | Shim (1.0mm Thick) | 6 |
290-9219 Stick Gp-Hoe -Reach
| 25***22 | Bucket As-Excavation; -B-Family | 1 |
| 29***19 | Stick Group-Hoe; -Reach | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
Lubrication System
201-3782 Breather Gp -Crankcase
| 09***72 | O-Ring, Breather | 1 |
| 17***34 | Support | 1 |
| 17***31 | Tube | 1 |
212-8653 Filter Gp-Engine Oil
| 09***21 | Plug | 2 |
| 12***72 | Gasket | 1 |
| 12***79 | Gasket | 1 |
178-6581 Lines Gp-Engine Oil
| 17***81 | Lines Group-Engine Oil | 1 |
| 18***64 | Strainer | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 4 |
171-9061 Lines Gp-Engine Oil Drain
| 09***88 | Clamp; (Hose) | 1 |
| 09***61 | Strap; (Cable) | 1 |
| 17***61 | Lines Group-Engine Oil Drain | 1 |
272-9955 Lines Gp-Filter
| 08***80 | Hose As (Nom 08, L=1200mm) | 1 |
| 14***45 | Connector As | 1 |
| 14***65 | Elbow | 1 |
5i-7770 Lines Gp-Turbocharger Oil
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 2A***22 | Gasket; (10.3x15.9x1 In)(Copper) | 2 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 2 |
Machine Arrangement
270-6744 Chassis Ar
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
| 24***19 | Frame Group-Upper | 1 |
| 24***56 | Tank & Mtg Group-Fuel | 1 |
240-3931 Chassis Ar
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
| 24***31 | Chassis Ar | 1 |
| 24***34 | Plate & Film Group | 1 |
269-5172 Conversion Ar-Machine
| 13***75 | Guard Group-Swivel | 1 |
| 16***78 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 17***06 | Separator Group-Water | 1 |
277-9085 Conversion Ar-Machine
| 13***79 | Guard Group-Swivel | 1 |
| 17***06 | Separator Group-Water | 1 |
| 18***13 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
269-5180 General Ar
| 22***61 | Electronics Group-Monitor | 1 |
| 22***98 | Electronics Group-Machine | 1 |
| 23***64 | Installation Ar-Engine | 1 |
240-3928 General Ar
| 22***67 | Power Train Ar | 1 |
| 22***98 | Electronics Group-Machine | 1 |
| 23***64 | Installation Ar-Engine | 1 |
Operator Station
245-7896 Adjuster Gp-Seat -Lower Slide
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***51 | Support As | 1 |
245-7889 Adjuster Gp-Seat -Upper Slide
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 24***17 | Motor As | 2 |
235-9004 Air Conditioner & Mounting Gp
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
235-9003 Air Conditioner Ar
| 23***03 | Air Conditioner Ar | 2 |
| 24***37 | Seat Belt Group; -Retractable, 46-mm | 1 |
| 24***07 | Parts Ar-Cab; -Handrail, Floodlight | 1 |
316-8916 Air Conditioner Gp
| 18***21 | Screen Group-Sun | 1 |
| 18***68 | Door & Mtg Group-Cab | 1 |
| 22***13 | Monitor & Mtg Group-Operator | 1 |
316-8811 Air Conditioner Gp
| 09***23 | Screw-Machine; (M6x1x6-mm) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***53 | Screw-Special | 1 |
240-5036 Air Conditioner Gp
| 09***23 | Screw-Machine; (M6x1x6-mm) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***53 | Screw-Special | 1 |
259-7347 Armrest Gp -Lh
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
| 12***38 | Seal-O-Ring (Id=6.7mm); (Id=6.70mm) | 1 |
| 24***37 | Valve As-Expansion | 1 |
259-7346 Armrest Gp -Rh
| 18***21 | Screen Group-Sun | 1 |
| 18***68 | Door & Mtg Group-Cab | 1 |
| 22***13 | Monitor & Mtg Group-Operator | 1 |
282-6526 Bracket Gp-Mounting -Wiper Switch
| 11***63 | Pulley | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 20***88 | Spacer | 1 |
245-7890 Bracket Gp-Mounting -Suspension Seat
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Pulley | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
275-9731 Cab Ar
| 09***57 | Hinge As | 2 |
| 19***64 | Handle As | 1 |
| 19***65 | Support As | 2 |
264-4287 Cab Gp
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
256-7414 Cab Gp -Exterior
| 12***17 | Guard | 2 |
| 17***16 | Grommet | 2 |
| 17***22 | Grommet | 2 |
269-9153 Cab Gp
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 23***79 | Nut-Speed | 6 |
245-7836 Coil Gp-Evaporator
| 23***46 | Control Group-Joystick; -Rh | 1 |
| 23***47 | Control Group-Joystick; -Lh | 1 |
| 24***36 | Coil Group-Evaporator | 1 |
239-6507 Compressor Gp-Refrigerant
| 23***07 | Compressor Group-Refrigerant | 1 |
| 24***11 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
259-7185 Condenser & Mtg Gp-Refrigerant
| 25***85 | Condenser & Mtg Group-Refrigerant | 1 |
| 25***05 | Control Group-Joystick; -Rh | 1 |
| 25***06 | Control Group-Joystick; -Lh | 1 |
245-7749 Condenser Gp-Refrigerant
| 24***49 | Condenser Group-Refrigerant | 1 |
| 29***38 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
| 29***39 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
259-7349 Console Gp-Operator -Lh
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***73 | Pin | 1 |
245-7922 Console Gp-Operator
| 24***22 | Console Group-Operator | 1 |
| 27***66 | Control Group-Joystick; -Rh | 1 |
| 27***67 | Control Group-Joystick; -Lh | 1 |
259-7348 Console Gp-Operator -Rh
| 25***48 | Console Group-Operator; -Rh | 1 |
| 29***40 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
| 29***41 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
270-5689 Control & Mtg Gp-Joystick -2-Button, Slide, Trigger Sw
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
270-5688 Control & Mtg Gp-Joystick -3-Button, Trigger Switch
| 14***34 | Strip | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1A***21 | Grommet | 1 |
259-7599 Control & Mtg Gp-Joystick -3-Button, Trigger Switch
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***73 | Pin | 1 |
270-5690 Control & Mtg Gp-Joystick -3-Button, Trigger Switch
| 11***32 | Pin | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 18***07 | Lever | 1 |
221-8884 Control & Mtg Gp-Pedal -Lh
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 22***84 | Control & Mtg Group-Pedal; -Lh | 1 |
239-8696 Control Gp-Foot -Work Tool
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 23***96 | Control Group-Foot; -Work Tool | 1 |
270-6107 Control Gp-Foot -Left On/Off Switch
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
260-2109 Control Gp-Handle -Rh
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 24***88 | Control Group-Handle; -Rh | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
260-2110 Control Gp-Handle -Lh
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 24***89 | Control Group-Handle; -Lh | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
260-2127 Control Gp-Handle -Rh
| 22***13 | Valve Group-Pilot; -Joystick, Rh | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
| 26***27 | Control Group-Handle; -Joystick, Rh | 1 |
247-5189 Control Gp-Handle -Lh
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***73 | Pin | 1 |
260-2128 Control Gp-Handle -Lh
| 23***00 | Valve Group-Pilot; -Joystick, Lh | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
| 26***28 | Control Group-Handle; -Joystick, Lh | 1 |
247-5188 Control Gp-Handle -Rh
| 18***00 | Screw-Tapping | 4 |
| 19***66 | Relay; (Compressor Clutch) | 2 |
| 24***13 | Motor As | 1 |
245-7846 Control Gp-Heat & Air Cond -Air Inlet
| 22***13 | Valve Group-Pilot; -Joystick, Rh | 1 |
| 24***46 | Control Group-Heat & Air Cond; -Air Inlet | 1 |
| 26***27 | Control Group-Handle; -Joystick, Rh | 1 |
275-7648 Control Gp-Hydraulic Pedal -Lh
| 23***00 | Valve Group-Pilot; -Joystick, Lh | 1 |
| 26***28 | Control Group-Handle; -Joystick, Lh | 1 |
| 27***48 | Control Group-Hydraulic Pedal; -Lh | 1 |
259-7706 Control Gp-Joystick -Lh
| 25***06 | Control Group-Joystick; -Lh | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
| 29***31 | Valve Group-Pilot; -Joystick, Lh | 1 |
239-9046 Control Gp-Joystick -Rh
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 23***46 | Control Group-Joystick; -Rh | 1 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
239-9047 Control Gp-Joystick -Lh
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 23***47 | Control Group-Joystick; -Lh | 1 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
270-5666 Control Gp-Joystick -Rh
| 26***27 | Control Group-Handle; -Joystick, Rh | 1 |
| 27***66 | Control Group-Joystick; -Rh | 1 |
| 29***30 | Valve Group-Pilot; -Joystick, Rh | 1 |
270-5667 Control Gp-Joystick -Lh
| 26***28 | Control Group-Handle; -Joystick, Lh | 1 |
| 27***67 | Control Group-Joystick; -Lh | 1 |
| 29***31 | Valve Group-Pilot; -Joystick, Lh | 1 |
259-7705 Control Gp-Joystick -Rh
| 25***05 | Control Group-Joystick; -Rh | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
| 29***30 | Valve Group-Pilot; -Joystick, Rh | 1 |
247-5276 Control Gp-Pedal -Electric
| 15***43 | Cover | 1 |
| 15***44 | Cover | 1 |
| 17***42 | Cover | 1 |
309-5808 Control Gp-Pedal -Electric
| 30***08 | Control Group-Pedal; -Electric | 1 |
297-0538 Control Gp-Pilot Operated Hyd -Rh
| 13***00 | Door Group-Cab | 1 |
| 15***67 | Door As | 1 |
| 15***77 | Hinge | 2 |
297-0540 Control Gp-Joystick -Rh
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 17 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
| 24***95 | Receptacle As-Connector; (12-Pin) | 1 |
170-9497 Control Gp-Pilot Operated Hyd -Travel
297-0539 Control Gp-Pilot Operated Hyd -Lh
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***03 | Handle; (Pull) | 1 |
| 15***04 | Cap | 2 |
297-0541 Control Gp-Joystick -Lh
| 23***99 | Cover As | 1 |
| 23***02 | Cover-Access; (Fuse-Rear Panel) | 1 |
| 23***93 | Fastener | 2 |
234-6501 Cover Gp-Cab -Rear
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***97 | Clip | 45 |
| 15***71 | Glass | 1 |
249-0530 Cover Gp-Cab -Exterior, Lh
| 17***96 | Clip | 3 |
| 23***76 | Duct As; (Fresh Air, Upper) | 1 |
| 23***77 | Duct As; (Vent, Rear) | 1 |
234-6500 Cover Gp-Storage -Cab, Rear
| 19***59 | Guard Group-Overhead | 1 |
| 23***00 | Cover Group-Storage; -Cab, Rear | 1 |
| 25***42 | Lighting Group-Flood; -Cab Guard | 1 |
286-0134 Display Gp-Monitor -Cd700
| 09***65 | Spacer; (17x40x3-mm Thk) | 3 |
| 19***53 | Guard As | 1 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
189-2768 Door & Mtg Gp-Cab
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 11***24 | Spring As; (Gas) | 2 |
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 2 |
139-7100 Door Gp-Cab
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 11***24 | Spring As; (Gas) | 2 |
| 13***00 | Door Group-Cab | 1 |
229-9082 Duct Gp-Cab Air
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
| 22***82 | Duct Group-Cab Air | 1 |
250-0712 Guard Ar-Overhead -Window
| 10***04 | Screw As; (M5x0.8x10-mm) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 23***66 | Base-Mounting | 1 |
194-3259 Guard Gp-Overhead
| 19***59 | Guard Group-Overhead | 1 |
| 27***60 | Mounting Group-Radio | 1 |
| 27***81 | Radio Group; -Am/Fm | 1 |
253-9224 Guard Gp-Window
| 09***13 | Clip | 2 |
| 10***36 | Clip | 2 |
| 12***98 | Bracket Assem. | 1 |
277-9100 Horn Gp-Electric
| 09***45 | Cable; (Lanyard) | 1 |
| 27***00 | Horn Group-Electric; -24-Volt, High Tone | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
251-0538 Radio Gp
| 25***38 | Installation Group-Radio | 1 |
| 27***46 | Seat Belt Group; -Retractable, 46-mm | 1 |
231-1768 Installation Gp-Radio
| 16***65 | Arm As; (Mirror Support) | 1 |
| 17***15 | Plug | 4 |
| 23***68 | Installation Group-Radio | 1 |
275-9858 Installation Gp-Radio
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 17 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
| 24***95 | Receptacle As-Connector; (12-Pin) | 1 |
164-0528 Lever Gp-Cab Door
| 16***28 | Lever Group-Cab Door | 1 |
| 32***82 | Monitor Group-Operator | 1 |
| 32***86 | Software Group-Monitor | 1 |
245-7761 Lines Gp-Air Conditioner
| 09***10 | Clamp | 3 |
| 09***72 | Grommet | 1 |
| 16***87 | Washer-Hard; (5.2x16x1.5-mm Thk) | 3 |
7y-0059 Literature Gp
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 7 |
| 16***74 | Louver As-Vent | 2 |
| 23***72 | Cover | 1 |
142-3836 Mirror Gp-Rear View
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
| 16***53 | Tube As; (Display Mount) | 1 |
221-8813 Monitor & Mtg Gp-Operator
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 23***62 | Mount As | 4 |
| 25***10 | Floor Mat | 1 |
349-5408 Monitor Gp-Operator
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 23***60 | Cable | 1 |
| 25***14 | Bracket As | 1 |
327-7482 Monitor Gp-Operator
| 14***80 | Bracket-Mounting | 1 |
| 16***10 | Bracket As | 1 |
| 32***82 | Monitor Group-Operator | 1 |
290-9468 Mounting Gp-Antenna -Product Link
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 22***72 | Control & Mtg Group-Machine | 1 |
| 22***65 | Mounting Group-Cab; -Rear | 1 |
225-5765 Mounting Gp-Cab
| 22***65 | Mounting Group-Cab; -Rear | 1 |
| 24***08 | Handrail Group; -Cab | 1 |
| 25***41 | Lighting Group-Flood; -Cab | 1 |
292-0304 Mounting Gp-Monitor -Accugrade
| 22***84 | Control & Mtg Group-Pedal; -Lh | 1 |
| 24***18 | Film Group; -Operator Controls, Notice | 1 |
| 25***93 | Fastener Group-Wiring Harness; -Pedal Control | 1 |
245-7811 Mounting Gp-Platform
| 13***65 | Grommet | 1 |
| 13***66 | Grommet | 1 |
| 16***49 | Cover | 2 |
259-4746 Mounting Gp-Radio -Grade Control
| 13***65 | Grommet | 1 |
| 13***66 | Grommet | 1 |
| 16***49 | Cover | 2 |
275-9860 Mounting Gp-Radio
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 2 |
| 25***39 | Radio-Am/Fm; (Multiple Area) | 1 |
| 27***60 | Mounting Group-Radio | 1 |
245-7762 Operator Ar
| 24***62 | Operator Ar | 1 |
249-7107 Parts Ar-Cab
| 22***56 | Support | 1 |
| 22***57 | Support | 1 |
| 22***18 | Shade As-Sun | 1 |
255-5845 Pedal Ar-Auxiliary -Lh
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 25***45 | Pedal Ar-Auxiliary; -Lh | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
263-6277 Platform Gp-Operator
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 4 |
| 23***11 | Switch As-Rocker; (Heated Seat) | 1 |
276-2881 Radio Gp -Am/Fm
| 27***81 | Radio Group; -Am/Fm | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 32***41 | Seat Belt Group; (Retractable, 43-mm) | 1 |
184-7621 Screen Gp-Sun
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 18***21 | Screen Group-Sun | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
240-5061 Seat & Mounting Gp -Air Susp, High Back, Tilt
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
240-5037 Seat Belt Gp -Retractable, 46-Mm
| 22***93 | Seat Group; -High Back, With Heater | 1 |
| 24***37 | Seat Belt Group; -Retractable, 46-mm | 1 |
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
273-5446 Seat Belt Gp -Retractable, 46-Mm
| 23***57 | Support As | 1 |
| 27***46 | Seat Belt Group; -Retractable, 46-mm | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
305-0467 Seat Belt Gp -Retractable, 43-Mm
| 14***21 | Kit-Clip; (Seat) | 1 |
| 24***68 | Cover As | 1 |
| 24***89 | Adjuster Group-Seat; -Upper Slide | 1 |
229-9093 Seat Gp -High Back, With Heater
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***80 | Cylinder-Damper | 1 |
| 22***93 | Seat Group; -High Back, With Heater | 1 |
229-9090 Seat Gp -High Back, Tilt
| 14***21 | Kit-Clip; (Seat) | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 24***68 | Cover As | 1 |
240-5062 Seat Gp-Suspension -Air Susp, High Back, Tilt
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 12 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 10***80 | Bolt-Socket Head; (M6x1x45-mm) | 4 |
240-5064 Seat & Mounting Gp -Air Susp, High Back, With Htr
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
| 24***64 | Spring; Replaces 421310a1, Spring, Seat Group-Suspension; -Air Susp, High Back, With Htr | 1 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***48 | Absorber As-Shock; (Sideshift) | 1 |
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
240-5065 Seat Gp-Suspension -Air Susp, High Back, With Htr
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 11 |
| 12***36 | Screw; (Truss Head) (M6x1.0x16mm) | 1 |
| 16***46 | Cup | 1 |
235-8856 Support Gp-Seat
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 8 |
| 16***46 | Cup | 1 |
| 16***55 | Panel-Switch; (Operator Console) | 1 |
245-7892 Suspension Gp-Seat
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 14***18 | Nut; (M6x1-Thd) | 4 |
| 24***92 | Suspension Group-Seat; -Mechanical | 1 |
240-5063 Suspension Gp-Seat -Air
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 8 |
| 16***46 | Cup | 1 |
| 16***55 | Panel-Switch; (Operator Console) | 1 |
273-5384 Suspension Gp-Seat -Air
| 14***95 | Hose; (650-cm Each) | 0 |
| 16***95 | Strap; (Cable) | 1 |
| 17***31 | Tank As-Window Washer | 1 |
229-9077 Suspension Gp-Seat
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 8 |
| 16***46 | Cup | 1 |
| 16***55 | Panel-Switch; (Operator Console) | 1 |
249-2664 Trim Gp-Cab -Interior, Front
| 10***89 | Rivet-Pop | 2 |
| 13***14 | Hammer Group | 1 |
| 14***97 | Strip | 1 |
249-2663 Trim Gp-Cab -Interior, Rear
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 16***62 | Ring-Retaining | 4 |
| 16***63 | Screw; (M4x0.7x20-mm) | 30 |
265-2815 Visor Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 13***34 | Seal; (111-cm Each) | 0 |
| 16***64 | Glass; (Front) | 1 |
253-4237 Washer Gp-Window
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 2 |
| 13***34 | Seal; (111-cm Each) | 0 |
| 13***27 | Holder | 1 |
249-7114 Window Gp-Cab -Front Window, 1-Piece
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 6 |
| 13***34 | Seal; (111-cm Each) | 0 |
| 16***84 | Striker | 2 |
249-7112 Window Gp-Cab -Front Window, 50/50-Split
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 2 |
| 18***54 | Switch As; (Cab Window Limit) | 2 |
| 19***12 | Seal-O-Ring | 1 |
252-1223 Window Gp-Cab -Front Window, 70/30-Split
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 16***62 | Ring-Retaining | 4 |
| 16***63 | Screw; (M4x0.7x20-mm) | 18 |
249-2761 Window Gp-Cab -Front Window, 70/30-Split
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 16***83 | Bracket | 6 |
| 19***57 | Bracket | 3 |
252-1226 Window Gp-Cab -Front Window, 50/50-Split
| 14***03 | Kit-Catch; (Window) | 1 |
| 21***34 | Kit-Seal; (Window) | 1 |
| 21***35 | Kit-Window; (Front) | 1 |
262-7933 Window Gp-Cab -Front Window, 1-Piece
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 24***14 | Window Group-Cab; -Front Window, 1-Piece | 1 |
| 26***33 | Window Group-Cab; -Front Window, 1-Piece | 1 |
252-1227 Window Gp-Cab -Front Window, 50/50-Split
| 25***27 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 28***62 | Frame | 1 |
| 28***63 | Seal | 1 |
247-6830 Window Gp-Cab -Front Window, 70/30-Split
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 6 |
| 13***34 | Seal; (111-cm Each) | 0 |
| 16***61 | Bumper | 2 |
282-6518 Window Gp-Cab -Front, 50/50-Split
| 24***26 | Wiper Group-Window; -Front, 50/50-Split | 1 |
| 24***12 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
| 28***18 | Window Group-Cab; -Front, 50/50-Split | 2 |
249-2665 Window Gp-Cab -Rear, Side, Top Windows
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 16***62 | Ring-Retaining | 4 |
| 16***63 | Screw; (M4x0.7x20-mm) | 18 |
282-6519 Window Gp-Cab -Front, 50/50-Split
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 26***33 | Window Group-Cab; -Front Window, 1-Piece | 1 |
| 28***19 | Window Group-Cab; -Front, 50/50-Split | 1 |
282-6520 Window Gp-Cab -Front, 50/50-Split
| 21***65 | Spring | 2 |
| 21***56 | Fitting | 1 |
| 23***06 | Kit-Support; (Window Wiper) | 1 |
151-6792 Window Gp-Door
| 14***95 | Hose; (650-cm Each) | 0 |
| 15***92 | Window Group-Door; (Door) | 1 |
| 19***18 | Blade As-Wiper; (Twin Blade) | 1 |
286-8861 Window Gp-Door
| 14***95 | Hose; (650-cm Each) | 0 |
| 20***35 | Wiper Group-Window; -Front, 50/50-Split | 1 |
| 21***57 | Cover | 2 |
249-7113 Wiper & Window Ar-Cab -Front Window, 70/30-Split
| 23***63 | Film-Identification; (Smartboom) | 1 |
| 24***13 | Wiper & Window Ar-Cab; -Front Window, 70/30-Split | 1 |
| 26***44 | Film-Warning; (Boom Float) | 1 |
249-2760 Wiper & Window Ar-Cab -Front, 50/50-Split
| 21***56 | Fitting | 1 |
| 23***06 | Kit-Support; (Window Wiper) | 1 |
| 23***63 | Nozzle | 1 |
249-2759 Wiper & Window Ar-Cab -Front Window, 1-Piece
| 14***95 | Hose; (650-cm Each) | 0 |
| 21***57 | Cover | 2 |
| 23***34 | Support As | 1 |
263-8848 Wiper & Window Ar-Cab -1-Piece
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***41 | Film-Information; (Operator Controls, Read Omm)(Joystick W/ Slide Control) | 1 |
| 26***48 | Wiper & Window Ar-Cab; -High Resistant Glass | 1 |
247-8426 Wiper Gp-Window -Front, 50/50-Split
| 17***15 | Film-Instruction; (Hammer Control) | 1 |
| 24***26 | Wiper Group-Window; -Front, 50/50-Split | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
247-8427 Wiper Gp-Window -Front Window, 70/30-Split
| 24***27 | Wiper Group-Window; -Front Window, 70/30-Split | 1 |
| 26***17 | Film-Identification; (Quick Coupler) | 1 |
239-3433 Wiper Gp-Window -Front Window, 1-Piece
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***48 | Film-Instruction; (Operator Controls, Read Omm) | 1 |
287-7534 Wiper Gp-Window -Front Window, 70/30-Split
| 22***72 | Film; (Warning) (High Pressure Cyl) (Hydraulic Service Center) | 1 |
| 23***68 | Film-Information; (Hydraulic Oil Level, Read Omm) | 1 |
| 28***34 | Wiper Group-Window; -Front Window, 70/30-Split | 1 |
202-6235 Wiper Gp-Window -Front, 50/50-Split
| 20***35 | Wiper Group-Window; -Front, 50/50-Split | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***42 | Film-Information; (Operator Controls, Read Omm) | 1 |
Power Train
227-6949 Drive Gp-Final -Without Motor
| 17***94 | Sprocket Group | 1 |
| 22***15 | Final Drive Group; -With Travel Motor | 1 |
| 22***49 | Drive Group-Final; (Without Motor) | 1 |
227-6116 Drive Gp-Final -Without Motor
| 21***82 | Motor & Mtg Group-Travel | 1 |
| 22***16 | Drive Group-Final; -Without Motor | 1 |
| 22***49 | Drive Group-Final; (Without Motor) | 1 |
227-6115 Final Drive Gp -With Motor
| 09***80 | Plate (10.0 mm Thick) | 1 |
| 09***11 | Washer; (47.3x76x1-mm Thk) | 6 |
| 09***16 | Bearing As; (Roller) | 3 |
270-8170 Final Drive Gp -With Motor
| 14***42 | Sprocket Group | 1 |
| 27***70 | Final Drive Group; -With Motor | 2 |
275-0435 Final Drive Gp -With Motor, Sprocket
| 14***79 | Drive Group-Swing; -With Motor, Seal; Packet Seal | 1 |
| 27***87 | Fastener Group-Swing & Final Dr | 1 |
| 27***96 | Final Drive Group; -With Motor, Sprocket | 2 |
275-0396 Final Drive Gp -With Motor, Sprocket
| 14***79 | Drive Group-Swing; -With Motor, Seal; Packet Seal | 1 |
| 22***68 | Fastener Group-Swing & Final Dr | 1 |
| 27***96 | Final Drive Group; -With Motor, Sprocket | 1 |
272-7839 Power Train Ar
| 27***39 | Power Train Ar | 1 |
| 6Y***98 | Sprocket - Track (21 Teeth) | 1 |
| 8T***30 | Capscrew; (Use 12-16) (Hex Hd) (M20x2.5x50) (Gd 10.9 Z) | 18 |
227-6167 Power Train Ar
| 22***67 | Power Train Ar | 1 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 16 |
| 8E***05 | Sprocket-Track | 1 |
179-2994 Sprocket Gp
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 4 |
145-3042 Sprocket Gp
| 13***77 | Bolt As; (M12x1.75x35-mm) | 4 |
| 14***42 | Sprocket Group | 1 |
| 24***40 | Box Group-Storage | 1 |
Service Equipment And Supplies
240-3761 Film Gp -Smartboom
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 10***45 | Film-Identification; (Cat) | 2 |
247-7411 Film Gp -Operator Controls, Notice
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 10***45 | Film-Identification; (Cat) | 2 |
247-7465 Film Gp -Hammer Control, Foot Switch
| 24***65 | Film Group; -Hammer Control, Foot Switch | 1 |
268-6816 Film Gp -Quick Coupler
| 26***16 | Film Group; -Quick Coupler | 1 |
305-3259 Film Gp
| 30***59 | Film Group | 1 |
298-4258 Film Gp -Fuel Transfer Pump
| 29***58 | Film Group; -Fuel Transfer Pump | 1 |
247-7410 Film Gp -Operator Controls, Notice
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 12***07 | Film-Instruction; (On Radiator Filler Cap) | 2 |
| 13***14 | Film-Instruction; (Bucket Controls) | 1 |
247-7418 Film Gp -Operator Controls, Notice
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 12***07 | Film-Instruction; (On Radiator Filler Cap) | 2 |
| 13***14 | Film-Instruction; (Bucket Controls) | 1 |
270-6745 Plate & Film Gp
| 27***45 | Plate & Film Group | 1 |
240-3934 Plate & Film Gp
| 24***34 | Plate & Film Group | 1 |
Undercarriage
179-2998 Adjustment Gp-Hydraulic Track
| 08***08 | Guard Group-Track Guide; -Center | 2 |
| 12***32 | Step Group | 1 |
| 16***54 | Guard Group-Travel Motor; (Travel Motor) | 1 |
297-9150 Adjustment Gp-Hydraulic Track
| 19***40 | Idler Group-Front | 1 |
| 22***53 | Gear & Bearing Group-Swing | 1 |
| 26***66 | Frame As-Undercarriage | 1 |
269-5176 Frame Ar-Undercarriage
| 11***17 | Bracket | 4 |
| 23***20 | Step | 4 |
| 26***67 | Frame As-Track Roller; (Lh) | 1 |
240-3937 Frame Ar-Undercarriage
| 11***40 | Bracket | 4 |
| 23***20 | Step | 4 |
| 23***57 | Frame As-Track Roller; (Rh) | 1 |
267-1766 Frame As-Undercarriage
| 24***88 | Guard As-Track Guide | 1 |
| 26***66 | Frame As-Undercarriage | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 4 |
236-8342 Frame As-Undercarriage
| 23***42 | Frame As-Undercarriage | 1 |
| 7X***63 | Bolt-Plt; (M20 X 2.5 X 60) | 4 |
| 7Y***81 | Guard As-Track Guide | 1 |
120-7168 Guard Gp-Track Guide -Full Length
| 11***12 | Pipe | 6 |
| 11***53 | Guard As-Track Guide | 2 |
| 11***54 | Guard As-Track Guide | 2 |
120-7167 Guard Gp-Track Guide -Rear
| 11***12 | Pipe | 12 |
| 11***53 | Guard As-Track Guide | 4 |
| 11***54 | Guard As-Track Guide | 4 |
7y-2202 Guard Gp-Track Guide -Center
| 21***69 | Guard As-Track Guide | 2 |
| 7Y***02 | Guard Group-Track Guide; -Center | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 16 |
195-5374 Guard Gp-Track Guide -Full Length
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 8 |
| 16***55 | Cover | 2 |
| 19***74 | Guard Group-Track Guide; -Full Length | 1 |
087-5908 Guard Gp-Track Guide -Center
| 08***08 | Guard Group-Track Guide; -Center | 1 |
| 21***69 | Guard As-Track Guide | 4 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 32 |
195-5375 Guard Gp-Track Guide -Rear
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 8 |
| 16***79 | Cover As | 1 |
| 16***12 | Cover As | 1 |
163-3754 Guard Gp-Travel Motor
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 8 |
| 16***54 | Guard Group-Travel Motor; (Travel Motor) | 1 |
| 18***74 | Cover As | 1 |
184-5713 Guard Gp-Travel Motor -Heavy-Duty
| 17***98 | Adjustment Group-Hydraulic Track | 2 |
| 18***13 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 19***41 | Idler Group-Front, Cutting Edge; Incl 201-203 | 2 |
166-1478 Guard Gp-Travel Motor -Heavy-Duty
| 10***85 | Seal Group-Duo-Cone | 2 |
| 11***51 | Shaft-Idler | 1 |
| 11***97 | Bearing | 2 |
194-1241 Idler Gp-Front
| 19***41 | Idler Group-Front, Cutting Edge; Incl 201-203 | 1 |
| 23***87 | Track Adjuster & Recoil Group; -Rh | 1 |
| 24***43 | Idler Group-Front; (Front) | 1 |
194-1240 Idler Gp-Front
| 19***40 | Idler Group-Front | 1 |
| 23***85 | Idler Group-Front; -Rh | 1 |
| 23***86 | Idler Group-Front; -Lh | 1 |
115-3696 Idler Gp-Front
| 11***96 | Idler Group-Front; (Front) (C) | 2 |
| 19***42 | Cutting Edge; 150 X 2100, Spring Group-Recoil | 1 |
| 8T***30 | Capscrew; (Use 12-16) (Hex Hd) (M20x2.5x50) (Gd 10.9 Z) | 4 |
239-4385 Idler Gp-Front -Rh
| 09***55 | Ring-Toric | 2 |
| 23***62 | Bearing; (Front Idler) | 2 |
| 23***85 | Idler Group-Front; -Rh | 1 |
239-4386 Idler Gp-Front -Lh
| 09***63 | Pin; (Cotter) | 1 |
| 15***80 | Seal; (Track) | 96 |
| 15***81 | Seal; (Track Master) | 2 |
239-4341 Idler Gp-Front
| 23***41 | Idler Group-Front; (Front) (A) | 1 |
| 23***88 | Track Adjuster & Recoil Group; -Lh | 1 |
| 24***43 | Idler Group-Front; (Front) | 1 |
248-7143 Idler Gp-Front
| 09***44 | Pin; (Cotter) | 1 |
| 11***53 | Link-Track Master | 1 |
| 11***54 | Link-Track Master | 1 |
201-9116 Link As-Track
| 20***16 | Link As-Track | 1 |
| 20***86 | Roller Group-Track-Single Flange | 16 |
| 7X***65 | Bolt; (M20x2.5x100-mm) | 64 |
194-1608 Link As-Track
| 19***08 | Link As-Track; (Track) | 1 |
| 20***64 | Roller Group-Track-Single Flange | 14 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
269-5178 Roller Ar-Track & Carrier
| 17***92 | Seal Group-Duo-Cone | 1 |
| 1M***97 | Ring-Sealing | 2 |
| 26***78 | Roller Ar-Track & Carrier | 1 |
270-4190 Roller Ar-Track & Carrier
| 27***90 | Roller Ar-Track & Carrier | 1 |
| 6V***61 | Seal; (Id=69.40mm) | 1 |
| 7H***71 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
6y-5323 Roller Gp-Track Carrier
| 15***86 | Collar; (Track Roller) | 2 |
| 15***26 | Dowel | 2 |
| 17***13 | Ring-Toric | 2 |
8e-5600 Roller Gp-Track Carrier
| 16***68 | Ring-Toric | 2 |
| 20***11 | Seal Group-Duo-Cone | 2 |
| 20***12 | Shaft-Track Roller | 1 |
209-3386 Roller Gp-Track-Single Flange
| 16***61 | Plate As | 1 |
| 20***86 | Roller Group-Track-Single Flange | 1 |
| 23***89 | Track Adjuster & Recoil Group | 1 |
206-1265 Roller Gp-Track-Single Flange
| 19***43 | Support As | 1 |
| 19***44 | Spring | 1 |
| 19***45 | Rod | 1 |
206-1264 Roller Gp-Track-Single Flange
| 20***64 | Roller Group-Track-Single Flange | 1 |
| 20***47 | Roller & Bearing As | 1 |
| 3E***17 | Dowel | 1 |
194-1242 Spring Gp-Recoil
| 16***61 | Plate As | 1 |
| 19***42 | Cutting Edge; 150 X 2100, Spring Group-Recoil | 1 |
| 23***89 | Track Adjuster & Recoil Group | 1 |
239-4389 Track Adjuster & Recoil Gp
| 12***61 | Shoe-Track; (500mm Wide) | 49 |
| 19***08 | Link As-Track; (Track) | 1 |
| 23***89 | Track Adjuster & Recoil Group | 1 |
239-4387 Track Adjuster & Recoil Gp -Rh
| 14***35 | Plate | 1 |
| 23***50 | Spring | 1 |
| 23***78 | Support | 1 |
239-4388 Track Adjuster & Recoil Gp -Lh
| 09***36 | Seal-Lip Type | 1 |
| 09***12 | Ring, Back-Up | 2 |
| 09***04 | Seal-O-Ring; (Id=49.40mm) | 1 |
239-4390 Track Adjuster & Recoil Gp
| 12***34 | Shoe-Track | 49 |
| 19***08 | Link As-Track; (Track) | 1 |
| 23***90 | Track Adjuster & Recoil Group | 1 |
196-7620 Track Gp -Offset, Lh
| 19***20 | Track Group; -Offset, Lh | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
194-1913 Track Gp -2-Required
| 12***04 | Shoe-Track | 45 |
| 19***13 | Track Group; -2-Required | 1 |
| 20***16 | Link As-Track | 1 |
196-1794 Track Gp -2-Required, Heavy Duty
| 12***05 | Shoe-Track | 45 |
| 19***94 | Track Group; -2-Required, Heavy Duty | 1 |
| 20***16 | Link As-Track | 1 |
196-7619 Track Gp -Offset, Rh
| 12***33 | Track-Shoe | 49 |
| 19***08 | Link As-Track; (Track) | 1 |
| 19***19 | Track Group; -Offset, Rh | 1 |
196-7621 Track Gp -2-Required, Heavy Duty
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 19***21 | Track Group; -2-Required, Heavy Duty | 1 |
| 4I***67 | Cap | 1 |
Work Tools
274-3315 Actuator Gp-Clamshell -B-Family
| 25***24 | Bucket As-Excavation; -B-Family | 1 |
| 27***15 | Actuator Group-Clamshell; -B-Family | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
7y-2219 Adjuster Gp-Bucket -B-Family
| 25***26 | Bucket As-Excavation; -B-Family | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
| 7Y***19 | Adjuster Group-Bucket; -B-Family | 2 |
250-6418 Adjuster Gp-Bucket -Cb-Family
| 25***18 | Adjuster Group-Bucket; -Cb-Family | 1 |
| 25***27 | Bucket As-Excavation; -Excavation, B-Family | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
257-5470 Bucket & Adjuster Gp -Extreme Excavation, Cb-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3869 Bucket & Adjuster Gp -Excavation, B-Family
| 25***69 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 25***29 | Bucket As-Extreme Excavation; -B-Family | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
251-3876 Bucket & Adjuster Gp -Extreme Excavation, B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
270-8857 Bucket & Adjuster Gp -Excavation, Cb-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-5546 Bucket & Adjuster Gp -Extreme Excavation, B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
257-3185 Bucket & Adjuster Gp -Extreme Excavation, B-Family
| 22***04 | Adapter-Tip; -K-100 | 2 |
| 22***05 | Adapter-Tip; -K-100 | 1 |
| 22***06 | Adapter-Tip; -K-100 | 1 |
251-3866 Bucket & Adjuster Gp -Excavation
| 25***66 | Bucket & Adjuster Group; -Excavation | 1 |
| 25***28 | Bucket As-Extreme Excavation; -B-Family | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
257-5472 Bucket & Adjuster Gp -Extreme Excavation, Cb-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3872 Bucket & Adjuster Gp -Excavation, B-Family
| 25***72 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 25***38 | Bucket As-Excavation; (B-Family) | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
251-3875 Bucket & Adjuster Gp -Excavation, B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 2 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
257-5473 Bucket & Adjuster Gp -Extreme Excavation, Cb-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
257-5471 Bucket & Adjuster Gp -Extreme Excavation, Cb-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
257-5465 Bucket & Adjuster Gp -Excavation, Cb-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3870 Bucket & Adjuster Gp -Excavation, B-Family
| 25***70 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 25***47 | Bucket As-Extreme Excavation; -B-Family | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
252-8926 Bucket & Adjuster Gp -Excavation, B-Family
| 22***04 | Adapter-Tip; -K-100 | 1 |
| 22***05 | Adapter-Tip; -K-100 | 1 |
| 22***06 | Adapter-Tip; -K-100 | 1 |
251-5545 Bucket & Adjuster Gp -Extreme Excavation, B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
257-5464 Bucket & Adjuster Gp -Excavation, Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 3 |
| 22***05 | Adapter-Tip; -K-100 | 1 |
| 22***06 | Adapter-Tip; -K-100 | 1 |
251-3871 Bucket & Adjuster Gp -Excavation, B-Family
| 25***71 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 25***48 | Bucket As-Extreme Excavation; -B-Family | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
251-3873 Bucket & Adjuster Gp -Excavation, B-Family
| 25***73 | Bucket & Adjuster Group; -Excavation, B-Family | 1 |
| 25***88 | Bucket As-Extreme Excavation; -B-Family | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
257-5463 Bucket & Adjuster Gp -Excavation, Cb-Family
| 22***04 | Adapter-Tip; -K-100 | 2 |
| 22***05 | Adapter-Tip; -K-100 | 1 |
| 22***06 | Adapter-Tip; -K-100 | 1 |
251-3877 Bucket & Adjuster Gp -Extreme Excavation, B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
257-5468 Bucket & Adjuster Gp -Excavation, Cb-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3874 Bucket & Adjuster Gp -Excavation, B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
257-5466 Bucket & Adjuster Gp -Excavation, Cb-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
257-5467 Bucket & Adjuster Gp -Excavation, Cb-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3918 Bucket As-Excavation
| 22***04 | Adapter-Tip; -K-100 | 2 |
| 22***05 | Adapter-Tip; -K-100 | 1 |
| 22***06 | Adapter-Tip; -K-100 | 1 |
251-3924 Bucket As-Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3926 Bucket As-Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3923 Bucket As-Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
252-8938 Bucket As-Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3921 Bucket As-Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3925 Bucket As-Excavation -B-Family
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3927 Bucket As-Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 2 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3922 Bucket As-Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 2 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3928 Bucket As-Extreme Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
257-3188 Bucket As-Extreme Excavation -B-Family
| 22***04 | Adapter-Tip; -K-100 | 2 |
| 22***05 | Adapter-Tip; -K-100 | 1 |
| 22***06 | Adapter-Tip; -K-100 | 1 |
251-5548 Bucket As-Extreme Excavation -B-Family
| 22***04 | Adapter-Tip; -K-100 | 2 |
| 22***05 | Adapter-Tip; -K-100 | 1 |
| 22***06 | Adapter-Tip; -K-100 | 1 |
251-5547 Bucket As-Extreme Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3929 Bucket As-Extreme Excavation -B-Family
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
250-8978 Bucket As-Extreme Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 2 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3998 Bucket Gp-Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
250-8957 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
250-8968 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 2 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
252-8929 Bucket Gp-Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
250-8985 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3996 Bucket Gp-Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 2 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
252-8928 Bucket Gp-Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3993 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3995 Bucket Gp-Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
250-8958 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3994 Bucket Gp-Excavation -Quick Coupler
| 22***04 | Adapter-Tip; -K-100 | 3 |
| 22***05 | Adapter-Tip; -K-100 | 1 |
| 22***06 | Adapter-Tip; -K-100 | 1 |
250-8965 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3947 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
250-8966 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3999 Bucket Gp-Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
250-8984 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3946 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3997 Bucket Gp-Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 3 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-3950 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-3948 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 3 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
250-8967 Bucket Gp-Excavation -Quick Coupler
| 22***84 | Adapter-Tip; (K-80, 2-Strap, Center) | 1 |
| 22***85 | Adapter-Tip; (K-80, 2-Strap, Rh) | 1 |
| 22***86 | Adapter-Tip; (K-80, 2-Strap, Lh) | 1 |
251-4001 Bucket Gp-Extreme Excavation -Quick Coupler
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
| 16***27 | Lock Group-Quick Coupler; -Hydraulic | 1 |
252-8931 Bucket Gp-Extreme Excavation -Quick Coupler
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
| 16***01 | Lock Group-Quick Coupler; -Hydraulic | 1 |
251-5550 Bucket Gp-Extreme Excavation -Quick Coupler
| 17***32 | Coupler Ar-Quick; -Hydraulic | 1 |
| 17***29 | Lines Group-Coupler; -B-Family | 1 |
| 25***50 | Bucket Group-Extreme Excavation; -Quick Coupler | 1 |
251-5553 Bucket Gp-Extreme Excavation -Quick Coupler
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
| 16***27 | Lock Group-Quick Coupler; -Hydraulic | 1 |
251-5554 Bucket Gp-Extreme Excavation -Quick Coupler
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
| 17***90 | Lock Group-Quick Coupler; -Mechanical | 1 |
257-3186 Bucket Gp-Extreme Excavation -Quick Coupler
| 25***86 | Bucket Group-Extreme Excavation; -Quick Coupler | 1 |
| 27***97 | Lines Group-Coupler; -Cb-Family | 1 |
| 27***18 | Coupler Ar-Quick; -Hydraulic, Cb-Family | 1 |
251-4000 Bucket Gp-Extreme Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
250-8986 Bucket Gp-Extreme Excavation -Quick Coupler
| 22***94 | Adapter-Tip; (K-90, 2-Strap, Center) | 1 |
| 22***95 | Adapter-Tip; (K-90, 2-Strap, Rh)(Rh) | 1 |
| 22***96 | Adapter-Tip; (K-90, 2-Strap, Lh)(Lh) | 1 |
251-5549 Bucket Gp-Extreme Excavation -Quick Coupler
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
257-3187 Bucket Gp-Extreme Excavation -Quick Coupler
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
| 17***90 | Lock Group-Quick Coupler; -Mechanical | 1 |
277-0039 Coupler Ar-Quick -Hydraulic
| 22***90 | Retainer-G.E.T. | 1 |
| 22***91 | Tip-Extra-Duty; (K-90) | 1 |
| 27***39 | Coupler Ar-Quick; -Hydraulic | 1 |
171-5236 Coupler Ar-Quick
| 17***36 | Coupler Ar-Quick; -Mechanical | 1 |
| 27***49 | Coupler Ar-Quick; -Hydraulic | 1 |
| 27***75 | Lines Group-Coupler; -B-Family | 1 |
171-5232 Coupler Ar-Quick
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
| 16***27 | Lock Group-Quick Coupler; -Hydraulic | 1 |
275-7763 Coupler Ar-Quick -Hydraulic, Cb-Family
| 09***03 | Bolt-Socket Head; (M16x2x75-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 16***05 | Shaft | 2 |
275-2918 Coupler Ar-Quick -Hydraulic, Cb-Family
| 17***70 | Kit-Latch; (Quick Coupler) | 1 |
| 27***18 | Coupler Ar-Quick; -Hydraulic, Cb-Family | 1 |
275-2920 Coupler Ar-Quick -Mechanical
| 17***56 | Hook Group-Lifting; -10-Ton Capacity | 1 |
| 27***20 | Coupler Ar-Quick; -Mechanical, Cb-Family | 1 |
277-0476 Coupler Ar-Quick -B1-Family
| 22***81 | Tip-Extra-Duty; (K-80) | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 27***76 | Coupler Ar-Quick; -Hydraulic | 1 |
277-0477 Coupler Ar-Quick -Hydraulic
| 22***90 | Retainer-G.E.T. | 1 |
| 22***01 | Tip-Extra-Duty; (K-100) | 1 |
| 27***77 | Coupler Ar-Quick; -Hydraulic | 1 |
275-7749 Coupler Ar-Quick -B-Family
| 09***03 | Bolt-Socket Head; (M16x2x75-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 16***40 | Wedge | 1 |
202-0863 Coupler Ar-Quick
| 20***63 | Coupler Ar-Quick | 1 |
| 27***39 | Coupler Ar-Quick; -Hydraulic | 1 |
| 27***75 | Lines Group-Coupler; -B-Family | 1 |
277-0037 Coupler Ar-Quick -Mechanical
| 09***48 | Nipple, Grease | 2 |
| 09***93 | Clamp-Hose | 1 |
| 09***85 | Clamp; (Hose) | 1 |
276-9993 Hook Gp-Lifting
| 22***89 | Tip-General Purpose; (K-80) | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 27***93 | Hook Group-Lifting | 1 |
173-9956 Hook Gp-Lifting
| 17***56 | Hook Group-Lifting; -10-Ton Capacity | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***99 | Tip-General Purpose; (K-90) | 1 |
169-0701 Lock Gp-Quick Coupler -Hydraulic
| 16***01 | Lock Group-Quick Coupler; -Hydraulic | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***92 | Tip-Penetration; (K-90)(K-90) | 1 |
171-3690 Lock Gp-Quick Coupler -Mechanical
| 17***90 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 22***82 | Tip-Penetration; (K-80) | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
169-0327 Lock Gp-Quick Coupler -Hydraulic
| 16***27 | Lock Group-Quick Coupler; -Hydraulic | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***09 | Tip Group-General Purpose; (K-100) | 1 |
229-6973 Tip Gp-Extra-Duty -K-100
| 22***83 | Tip-Bucket; (K-80) | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***73 | Tip Group-Extra-Duty; -K-100 | 1 |
217-4891 Tip Gp-Extra-Duty -K-90
| 21***91 | Tip Group-Extra-Duty; -K-90 | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***02 | Tip-Penetration; (K-100) | 1 |
229-6964 Tip Gp-Extra-Duty -K-80
| 22***90 | Retainer-G.E.T. | 1 |
| 22***93 | Tip-Penetration Plus; (K-90)(K-90) | 1 |
| 22***64 | Tip Group-Extra-Duty; -K-80 | 1 |
229-6969 Tip Gp-General Purpose -K-80
| 22***69 | Tip Group-General Purpose; -K-80 | 1 |
| 24***97 | Plate | 4 |
| 24***99 | Screw-Button Head; (M8x1.25x30-mm) | 4 |
229-6978 Tip Gp-General Purpose -K-100
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 22***78 | Tip Group-General Purpose; -K-100 | 1 |
| 24***86 | Plate | 2 |
217-4896 Tip Gp-General Purpose -K-90
| 21***96 | Tip Group-General Purpose; -K-90 | 1 |
| 22***90 | Retainer-G.E.T. | 1 |
| 22***03 | Tip Group-Penetration Plus; (K-100) | 1 |
217-4892 Tip Gp-Penetration -K-90
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 21***92 | Tip Group-Penetration; -K-90 | 1 |
229-6974 Tip Gp-Penetration -K-100
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 22***74 | Tip Group-Penetration; -K-100 | 1 |
229-6965 Tip Gp-Penetration -K-80
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 22***65 | Tip Group-Penetration; -K-80 | 1 |
229-6966 Tip Gp-Penetration Plus -K-80
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 22***66 | Tip Group-Penetration Plus; -K-80 | 1 |
217-4893 Tip Gp-Penetration Plus -K-90
| 21***93 | Tip Group-Penetration Plus; -K-90 | 1 |
| 22***82 | Duct Group-Cab Air | 1 |
| 23***04 | Air Conditioner & Mounting Group | 1 |
229-6975 Tip Gp-Penetration Plus -K-100
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 22***75 | Tip Group-Penetration Plus; -K-100 | 1 |
323D LN serial number reference
The PIN plate is a stamped metal tag riveted to the upper structure frame, usually on the front-right side near the cab, with Caterpillar duplicating the number in at least one other spot on the frame. Read the first three characters as the plant/model prefix (identifies the specific build configuration) and the digits after it as the sequential unit number for that block. If plates disagree with each other, treat that as a sign the identity plate was swapped and confirm with a dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| CYD | 323D LN excavator (shared production block with 323D S) | Earliest production block for this platform. Powered by the Cat 3066 ATAAC engine, not the later C6.4. Same prefix range also covers the 323D S configuration in the parts book. |
| ZMF | 323D LN excavator (combined parts/service book with 323D and 323D L) | Later-production block. Powered by the Cat C6.4 engine. Covered in a combined service book alongside the base 323D and 323D L configurations. |
| WNE | 323D LN excavator (combined parts/service book with 323D and 323D L) | Later-production block, same combined-book pattern as ZMF. Powered by the Cat C6.4 engine. |
| DCJ | 323D LN Mobile Hydraulic Power Unit (MHPU) | Carrier/power-pack build, not the standard boom-and-stick excavator arrangement. Powered by the Cat C6.4 engine. |
| RAC | 323D LN excavator (shared production block with 323D S) | Later-production block, shared with the 323D S configuration in the parts book. Powered by the Cat C6.4 engine. |
| SED | 323D LN excavator (shared production block with 323D S) | Later-production block, same shared-book pattern as RAC. Powered by the Cat C6.4 engine. |
| FAW | 323D LN excavator - confirm with dealer | Documented in a dedicated parts-catalog listing for this prefix, but no second independent source was found. Verify against the machine's PIN plate or with a dealer before relying on it. |
Frequently asked questions
What engine does the Cat 323D LN use?
It depends on the production block. Early machines run the mechanically-governed Cat 3066 ATAAC, a turbocharged and air-to-air-aftercooled inline-six rated 103 kW (140 hp) net. Later-production blocks, including the LN-based mobile hydraulic power-unit build, carry the electronically controlled Cat C6.4 ACERT in the same power class. Check the engine serial plate to confirm which is fitted before ordering filters or injector parts.
What is the operating weight of the Cat 323D LN?
Roughly 21.8-22.7 t (48,100-49,960 lb), varying by boom and stick configuration, on the standard 500 mm triple-grouser shoes. That is slightly lighter than the wider-gauge 323D L sibling despite similar overall dimensions, a result of the LN's narrower undercarriage and lighter counterweight.
What replaced the Cat 323D LN?
The Cat 323E LN succeeded it, arriving in the early 2010s with a C6.6 ACERT engine and updated hydraulics as part of Caterpillar's broader D-to-E-series refresh across the 320-330 medium excavator range.
What 323D LN owners discuss
Does the 323D LN always have the same engine, and why does it matter for repairs?
No. Production of this model spans two different engines under one nameplate. Early-block machines run the Cat 3066 ATAAC, a mechanically-controlled turbocharged/air-to-air-aftercooled inline-six. Later-block machines built after a mid-production update carry the Cat C6.4 ACERT, with electronic common-rail injection. The two are not interchangeable service platforms: filtration, injector service (O-ring condition on the older mechanical pump vs. injector trim-code programming on the electronic engine), and diagnostic connector/fault-code lists all differ. Read the engine serial plate before ordering parts or troubleshooting - do not assume from the machine's model badge alone which engine is fitted.
What hydraulic symptoms come up most often as these machines age?
The most frequently reported complaint is a main-pump output-pressure sensor or pressure-relief-valve solenoid losing signal. That throws a low-voltage/open-circuit fault and shows up as the machine feeling underpowered, hunting, or bogging down and nearly stalling when hydraulics are worked hard - a symptom several owners saw right after adding an auxiliary circuit for a hammer or other tool. Most of these trace back to a chafed sensor cable or a corroded connector rather than a failed pump or sensor itself, so check harness routing near the pump housing before condemning parts. Separately, jerky cylinder movement, slow function speed, or hot-running hydraulic oil on a machine this age points to fluid contamination or worn cylinder/motor seals rather than the pump - an oil sample and a look at the return filter are the first diagnostic steps owners recommend.
Is a grinding or catching sensation on swing normal wear, or a red flag?
Some owners on this D-series platform report the upper structure hesitating or catching on swing after extended digging at a diagonal to the tracks, and a grinding noise on swing that traces to wear or contamination inside the swing-reduction gearset rather than the swing motor. Pull a sample of the swing-drive gearcase oil and check for metal before assuming it is just a motor issue - a bearing breaking down internally shows up there before the noise gets bad. This wear pattern is common across the 320/323 D-series swing-drive design generally, not confirmed as unique to one build block. Have your dealer verify swing bearing bolt torque and ring play on any machine showing this symptom, since a compromised bearing affects how securely the house stays seated on the ring under load.
What does the LN undercarriage mean for wear, and is it different from a regular 323D L?
LN stands for this machine's long-and-narrow undercarriage: same overall track length as the L configuration but a narrower track gauge, riding on 500 mm (20 in) triple-grouser shoes rather than the L's 600 mm standard shoe. That narrower stance trims shipping width and gives a slightly higher ground pressure for similar operating weight, and it leaves the machine a bit less stable side-to-side than the wider L. Practically, roller, idler, and track-link wear accelerates faster on this configuration when the machine works across slopes or takes repeated sideloading, versus square in-line digging. Daily removal of packed material from the rollers and idlers and keeping track tension within spec are the habits owners cite most for getting full undercarriage life out of the narrow-gauge setup.
What's behind repeated fuse blowing or intermittent electrical faults?
Owners report electrical gremlins becoming common as these machines pass roughly 1500-2000 hours: intermittent no-crank conditions, fault codes that come and go, and general wiring complaints that take a dealer tech real diagnostic time to isolate. One specific pattern shows up more than once: hydraulic oil migrating down the joystick boot or the pilot-lock (safety) lever linkage and soaking into the wiring harness near the lever's neutral-start switch, which degrades the insulation and eventually shorts a fuse - commonly the ignition/key-switch fuse - repeatedly on power-up. Repairing or re-routing that section of harness resolves it more reliably than just replacing the fuse. Have your dealer verify the pilot/hydraulic-lock safety-switch circuit after any repair in this area - it is a safety interlock that blocks hydraulic function movement until the lever is engaged, and it needs to test correctly before the machine goes back to work.
Starts fine cold but won't restart after a short warm shutdown - what's the usual cause?
A recurring complaint on this platform: the machine cranks and starts fine first thing in the morning, but after being shut down warm for a break, it won't restart for 20-30 minutes. Troubleshooting on this symptom points first at the starting circuit - main relay, key-switch fuse, battery disconnect switch - rather than the engine, since a hot engine that won't even crank (as opposed to cranking but not firing) is almost always electrical. Confirm battery voltage at the fuse panel and check the main relay before chasing a fuel-system or glow-plug explanation.
What should I check before buying a used 323D LN?
Read the engine serial plate first and confirm whether the machine has the earlier 3066 ATAAC or the later C6.4 ACERT - filters, injector service, and diagnostics differ between them, so this affects what you're buying into for parts and support. Pull the hour meter and match it against service records rather than trusting the display alone. Walk the undercarriage: on this narrow-gauge LN configuration check shoe, link, roller, and idler wear closely, especially if the machine's history includes slope or sideloaded work. Run the hydraulics hard under load and watch for hesitation, bogging, or near-stall behavior that would point to a pump-pressure-sensor or relief-valve-solenoid fault, and pull an oil sample if you can. Swing the house through a full rotation including at a diagonal, listening for grinding or catching, and check the swing gearcase oil for metal. Check the wiring harness near the pilot-lock lever and joystick boots for oil staining or chafing, a common trouble spot on aged machines. Have your dealer run a full pre-purchase inspection with fault codes pulled and swing-bearing bolt torque checked before you commit.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 323D LN. Related factory variants of the same model family:
323D LN
Need a specific 323D LN part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.