Caterpillar Part reference

1130308seal-o-ring (id=26.0mm); (id=26.00mm)

This page covers Caterpillar part number 1130308, cataloged as an O-ring seal with a 26.0mm inside diameter (listed also as 26.00mm). The catalog shows this part in association with the Caterpillar 3456B within the electrical and starting system, but those occurrences describe surrounding assemblies and do not define this part's application. Confirm the recorded conditions before ordering.

Recorded applications

Models and catalog references

Selected catalog references that list this part. A catalog association does not confirm fitment for every machine or configuration.

& More catalog references

Catalog context

Where this part appears

  1. ModelCaterpillar 3456B
    Browse Caterpillar models
  2. Groupelectrical and starting system
  3. Subgroupswitch group-disconnect
  4. Unit7n-0719 switch gp-disconnect -battery s/n bkf1-up; bly1-up part of 170-6853 battery & wiring gp an attachment
Reduced catalog diagram for Caterpillar 3456B Locked
Diagram previewReduced catalog thumbnail
About diagram access

Check the signed-in Part Book for available diagrams and the complete catalog breakdown.

Parts in this preview

Selected records
Selected catalog parts, with other part numbers masked
Part numberDescription
09***66washer; (hard) (4.5x9x1mm thk)
10***05kit-receptacle; (6-pin)(display monitor harness)
10***07switch group-rotary; -autodig material select-throttle position
1130308seal-o-ring (id=26.0mm); (id=26.00mm) (current part)

Selected entries from this catalog unit. Other part numbers are masked. Confirm the full breakdown and your machine configuration before ordering.

Browse Caterpillar models

General guidance

Component knowledge

Understanding this component

In general, an O-ring is a circular elastomeric seal that sits in a groove and is compressed to block leakage of fluids or air between two mating surfaces. The inside diameter is the measurement across the open center of the ring, which is the main dimension used to match an O-ring to its groove or mating part.

What to check before ordering

Part number 1130308 is the existing catalog number for this seal and should be used when referencing this item. Before ordering, check the recorded catalog conditions and confirm that the inside diameter and the machine's serial and configuration details match your requirements.