Caterpillarexcavator
Caterpillar 385B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 385B is a large hydraulic excavator in the 80-90 tonne class, built for mass excavation, quarry loading, and heavy construction work. It runs Caterpillar's 3456 ATAAC inline-six diesel, a turbocharged, air-to-air aftercooled engine with electronic unit injection and ADEM II electronic control, rated at 395 kW (530 hp) gross and 382-383 kW (513 hp) net at 1800 rpm. Operating weight runs roughly 83.5-84 tonnes (184,000-185,500 lb) in standard-undercarriage form, climbing to about 86-90 tonnes (190,000-198,000 lb) on the long-reach 385B L with its wider variable-gauge undercarriage, and varies further with boom, stick, and counterweight choice. Caterpillar built the 385B from around 2001 to 2005, positioned above the earlier 375/375L in its large-excavator range. Cat offered it as the standard 385B and the long-undercarriage 385B L, each with a choice of GP or Mass boom and multiple stick lengths.
The 385B moved Caterpillar's large-excavator line from the mechanically injected 3406-family engines of the 375 generation onto the 3456 ATAAC platform with electronic fuel control, adding a three-pump hydraulic system with an independent swing circuit and electronically activated proportional priority pressure-compensated valves for tighter multi-function control. Track pins run sealed and internally lubricated rather than relying on ambient grease, which stretches bushing life against older grease-lubricated designs. Caterpillar replaced the 385B with the 385C around 2005, which switched to the C18 ACERT engine and later emissions technology; the platform was eventually folded into the Cat 390 large-excavator line. In today's used and parts market, 385B units draw interest for their simpler, pre-ACERT engine and control system, which brings lower rebuild cost and fewer emissions-related failure points than later machines. Demand centers on swing-drive and final-drive rebuild components, undercarriage wear parts, and 3456 engine parts that share lineage with Caterpillar's 3406E/C-16 truck engine family, which helps parts availability.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 385B specifications
Engine
| Engine model | Cat 3456 ATAAC — turbocharged, air-to-air aftercooled inline-6 diesel with electronic unit injection |
| Gross power | 395 kW (530 hp) at 1800 rpm |
| Net power | 382–383 kW (513 hp) at 1800 rpm, per ISO 9249 / SAE J1349 |
| Displacement | 15.8 L (964 cu in) |
| Bore x stroke | 140 mm x 171 mm (5.5 in x 6.7 in) |
| Emissions | Meets EPA Tier 2 / EU Stage II for this engine rating |
| Engine identity note | The 385B's factory engine is the Cat 3456 ATAAC. Some secondary spec listings show a C18 ACERT engine instead — that engine belongs to the later 385C generation, not the 385B. |
Weights
| Operating weight, standard undercarriage | 83,434–84,130 kg (183,940–185,475 lb), varies by boom/stick/bucket configuration |
| Operating weight, long undercarriage | 86,078–86,160 kg (189,770 lb) |
Dimensions
| Transport length | 13.47–16.18 m (44.2–53.1 ft), varies by boom option |
| Transport height | 4.78–5.76 m (15.7–18.9 ft), varies by boom option |
| Transport width (over tracks) | 3.4 m (11.2 ft) |
| Tail swing radius | 4.59 m (15.06 ft) |
| Track shoe width | 650 mm (25.6 in) reference shoe; 750 mm (30 in) or 900 mm (36 in) triple-grouser shoes offered depending on standard or long undercarriage |
| Ground clearance | 0.89 m (2.92 ft) |
| Undercarriage / track-on-ground length | 4.6 m (15.1 ft) |
| Height to top of cab | 3.76 m (12.34 ft) |
Performance
| Max digging depth | 10.7–11.55 m (35.1–37.9 ft), varies by boom/stick configuration |
| Max reach at ground level | 15.7–17.07 m (51.5–56 ft), varies by boom/stick configuration |
| Max dump/loading height | 8.06–11.2 m (26.45–36.8 ft), varies by boom/stick configuration |
| Max cutting height | 12.54–14.94 m (41.1–49 ft), varies by boom/stick configuration |
| Swing speed | 6.2 rpm |
| Max travel speed | 4.4–4.6 km/h (2.7–2.8 mph) |
| Max drawbar pull | 591–592 kN (132,810–133,087 lb) |
| Gradeability | Not documented in available spec sheets for this model |
Forces
| Bucket digging force (tear-out) | Approx. 340 kN (76,455 lbf), reference bucket/stick configuration |
| Stick/arm digging force | Not published in available spec sheets for this model — figure varies by stick length; confirm against the factory specalog for the exact stick/boom combination |
Service capacities (summary)
| Fuel tank | 1,240–1,242 L (327.6–328 gal) |
| Hydraulic system, total (incl. tank) | 995–996 L (262.9–263 gal) |
| Hydraulic tank only | 810 L (214 gal) |
| Engine oil | 80–80.5 L (21.1 gal); some configuration listings show as low as 65 L (17.2 gal) |
| Cooling system | 101 L (26.7 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
385B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 79.9 L (21.1 US gal) | Cat DEO (Diesel Engine Oil) meeting the engine's factory oil-performance spec for the 3456 ATAAC engine. SAE 15W-40 for moderate-to-warm ambients (roughly -9C to 50C); SAE 10W-30 for a wider cold-weather range (roughly -18C to 40C); Cat Arctic-grade 0W-40 for sustained sub-zero cold down to about -40C. |
| Cooling system | 101.1 L (26.7 US gal) | Cat ELC (Extended Life Coolant), premixed 1:1 with water, or Cat DEAC conventional antifreeze/coolant where ELC is not used. Any full-strength heavy-duty coolant meeting the Cat coolant spec is an acceptable alternate. |
| Fuel tank | 1,241 L (328 US gal) | No. 2-D diesel fuel for normal operation. Switch to No. 1-D diesel fuel in cold weather to ease cold starting and limit fuel waxing. |
| Hydraulic system total and hydraulic tank | Total system incl. tank: 995.6 L (263 US gal). Hydraulic tank alone: 810.1 L (214 US gal) | Cat HYDO Advanced hydraulic oil, graded by ambient: SAE 10W for cold-start service, SAE 30W for standard warm-climate service. Cat BIO HYDO Advanced is the biodegradable alternate. Cat TDTO meeting TO-4 spec is the historical fill on this machine class where the manual specifies it. |
| Final drive (each, x2) | 20.8 L (5.5 US gal) per side | Cat TDTO (Transmission/Drive Train Oil) meeting Cat TO-4 spec. SAE 30 TO-4 where summer highs stay below about 27C (80F); SAE 50 TO-4 for hotter climates. |
| Swing drive | 18.9 L (5.0 US gal) | Same Cat TDTO TO-4 spec as the final drives, SAE 30 or SAE 50 chosen by the same ambient-temperature rule. |
| Pilot / servo circuit | Not listed as a separate refill point - pilot and servo oil is drawn from the main hydraulic tank | Follows the hydraulic system fluid recommendation above; no separate spec. |
| Grease | Spec only - no listed reservoir capacity, applied per lube-point schedule | Cat Multipurpose Grease (Cat MPGM), NLGI 2, for routine pin and bushing lube points. Cat Prime Application Grease (moly-fortified, NLGI 2) is the severe-duty option for heavily loaded bucket and linkage pins. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 385B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 385B beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S sampling on engine oil, hydraulic oil, coolant, and both final-drive and swing-drive oil on a fixed schedule, not just at overhaul time. The 3456's head-mounted camshaft drives high injection pressure, so oil and fuel cleanliness affect injector life as much as fuel quality does. Treat oil-change discipline as injector protection, not just engine care. Watch final-drive and swing-drive samples for water or rising metal, the first sign of a duo-cone or output-pinion seal starting to weep before it shows up as a visible leak.
Corrective & Common Repairs
Swing that drags then lurches on a 385B usually traces to internal leakage in the swing motor or a sticking control-valve spool, not a worn swing bearing; check pressure and flow at the swing motor ports first. Final-drive leaks show up at the duo-cone seal behind the sprocket; swing gearbox leaks show up at the output pinion seal. Both harden and weep with age and heat. Electrical faults usually trace to corroded connectors or chafed harness near the engine and swing frame rather than the ECM itself.
Overhaul & Rebuild Points
Plan final-drive rebuilds around the duo-cone seal and planetary gear condition rather than a fixed hour number; oil-sample metal trend is the better trigger. Swing gearbox rebuilds center on the output pinion seal and bearing/backlash condition. Box-section boom and stick welds see fatigue stress over years of digging cycles on a machine this size, so inspect them at major overhaul intervals along with pin and bushing wear. Undercarriage rebuilds follow grouser height and pin/bushing wear limits, since the sealed, internally lubricated pin design extends life well past a grease-lubricated chain.
Seasonal & Environment Servicing
Cold climates need Cat DEO graded for the ambient (10W-30 or Arctic 0W-40 in sustained sub-zero), Cat TDTO graded by season in the final drives and swing drive, and No. 1-D fuel in winter to limit waxing. The side-by-side radiator and hydraulic-oil-cooler layout keeps both cores accessible for daily cleaning, which matters most in hot, dusty quarry work where a plugged core or dirty ATAAC cooler shows up first as soft power and dark exhaust, not overheating. Keep the cab filter serviced alongside the engine air filter in dusty conditions.
385B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 129-0375 | Bowl As-Water Collection | Fuel system service | Check fitment → |
| 133-5673 | Element | Fuel system service | Check fitment → |
| 141-0284 | Kit-Fuel Filter & Waterseparator | Fuel system service | Check fitment → |
| 106-3969 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
385B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 FMI 01 | Engine Oil Pressure - data valid but below normal operating range, most severe level (low oil pressure) | Worn oil pump, blocked suction screen, low oil level, or a failed oil pressure sensor/wiring circuit. | Idle down and shut the engine off if the warning is active at running speed. Check oil level and condition first, then verify sensor supply and ground before condemning the pump. |
| CID 0110 FMI 00 | Engine Coolant Temperature - data valid but above normal operating range, most severe level (high coolant temperature) | Low coolant level, plugged radiator or oil cooler fins, slipping fan drive, or a stuck thermostat. | Let temperature drop at idle before shutdown. Check coolant level, core cleanliness, and fan drive before replacing the temperature sensor. |
| CID 0190 FMI 10 | Engine Speed/Timing Sensor - abnormal rate of change in the signal | Excess air gap between the sensor and the timing gear, a contaminated or loose sensor, or a chafed/corroded harness connector. | Reset the sensor air gap to spec (turn in until it lightly touches the gear tooth, then back off the specified amount and lock it), inspect the harness and connector, clear the code, and confirm it stays inactive through the rpm range. |
| CID 0001 FMI 05 | Cylinder #1 Injector Solenoid - current below normal or open circuit | Open injector solenoid winding, a broken harness wire, or a disconnected/corroded injector connector. | Check injector harness continuity and connector condition on the affected cylinder, then confirm with a cylinder cutout test before replacing the injector. |
| CID 0041 FMI 04 | 8 Volt DC Sensor Supply - voltage below normal | A shorted sensor or sensor wiring pulling down the shared 8V supply, or a weak ECM supply circuit. | Disconnect sensors fed by the 8V supply one at a time to isolate the shorted circuit before condemning the ECM. |
| CID 0168 FMI 02 | Electrical System Voltage - erratic, intermittent, or incorrect | Loose or corroded battery/ECM ground and power connections, marginal charging output, or a weak battery. | Check battery state of charge, clean and re-torque battery and ECM ground connections, and verify alternator output before further diagnosis. |
| CID 0254 FMI 12 | Electronic Control Module - bad intelligent device or internal component failure | Internal ECM fault, often following a sustained over-voltage or under-voltage condition on the supply circuit. | Confirm supply voltage and grounds are within spec, reflash/reprogram the ECM, and only replace the module if the fault persists. |
| CID 0094 FMI 01 | Fuel Delivery Pressure - data valid but below normal operating range, most severe level (low fuel pressure) | Plugged primary or secondary fuel filter, restricted fuel line, air in the fuel system, or a weak transfer pump. | Check filter condition and fuel supply for restriction or air first, then verify pump output pressure before replacing the pressure sensor. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
385B attachments & work tools
Buckets
General-purpose buckets for the 385B run from a reference capacity of about 2.98 m3 (3.9 cu yd) up to a maximum listed capacity of 5.43 m3 (7.1 cu yd), consistent across both standard and L (long-undercarriage) configurations. Severe-duty/rock buckets for this size class typically run around 1.9 m (75 in) wide. Buckets mount pin-on as standard; a hydraulic pin-grabber quick-coupler option is also offered for this size class.
Hydraulic hammers
The 385B falls in the roughly 80-90 tonne (176,000-190,000 lb) carrier class, so it pairs with the largest standard heavy-class hammer models in a manufacturer's lineup rather than mid-range units. Applying the common breaker-to-carrier sizing guideline of about 8-10% of operating weight puts a properly matched hammer in the rough 6,500-8,500 kg operating-weight bracket; confirm against the specific hammer maker's carrier chart. The hammer runs off the machine's high-pressure attachment circuit, not the medium-pressure rotate/tilt line.
Quick couplers
The 385B uses a hydraulic pin-grabber coupler in the HB-linkage size class, the same linkage family used across 385C, 390 and 395-series excavators, so tools and buckets are shareable with those larger siblings. Bucket and tool pins in this size class run on the order of 130 mm diameter with roughly 650 mm stick width; verify exact pin diameter and centers against the individual machine's stick before ordering a coupler, as this varies by configuration.
Thumbs/grapples
An auxiliary high-pressure hydraulic valve is standard on the 385B, enabling hydraulic thumb and grapple attachments without extra plumbing. Demolition and sorting grapples for this class are heavy jaw units with wear-resistant cutting edges, suited to scrap, demolition debris and rock handling; hydraulic thumbs pivot off the stick pin and share the same high-pressure circuit used for hammers.
Rippers
A single-shank ripper is offered for the 385B on the same HB/HB2 linkage shared with 385C, 390 and 395-family excavators, used for breaking hard ground, rock and paved surfaces the bucket can't penetrate. Typical ripper shank assemblies for this class weigh roughly 2,200 kg (4,850 lb) and use the same large pin sizes, on the order of 120-130 mm, as the machine's other pin-on tools.
Hydraulic kit notes
The 385B runs a three-pump PPPC (proportional priority pressure-compensated) hydraulic system with a standard auxiliary valve for attachment work. Normal system relief pressure is about 32 MPa (4,640 psi), rising to roughly 35 MPa (5,075 psi) for travel/heavy-lift; total main pump flow is about 980 L/min (259 gpm). Attachment plumbing splits into a medium-pressure circuit for rotate/tilt functions and a separate high-pressure/high-flow circuit for hammers, shears and multi-processors, so confirm which circuit(s) are fitted before ordering a given tool.
All 385B assemblies by section
Every catalogued assembly group for the Caterpillar 385B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
151-6658 Air Cleaner Gp
| 13***03 | Support-Exhaust Pipe | 1 |
| 15***58 | Air Cleaner Group | 1 |
| 2N***65 | Bolt-High Temperature; (3/8-16x1.75-In) | 2 |
151-6655 Extension Gp-Exhaust
| 15***41 | Clip | 2 |
| 15***55 | Extension Group-Exhaust | 1 |
| 17***74 | Pipe As | 1 |
114-1904 Lines Gp-Air
| 10***54 | Manifold-Exhaust; (Center) | 1 |
| 10***08 | Manifold-Exhaust; (End)(End) | 2 |
| 10***92 | Stud-Taperlock; (3/8-16x3.93in) | 11 |
151-6663 Lines Gp-Air
| 13***47 | U-Bolt | 2 |
| 15***63 | Lines Group-Air | 1 |
| 17***46 | Bracket As | 1 |
151-6656 Lines Gp-Air
| 13***47 | U-Bolt | 2 |
| 15***56 | Lines Group-Air | 1 |
| 17***42 | Bracket As | 1 |
191-6147 Lines Gp-Air
| 13***47 | U-Bolt | 2 |
| 17***46 | Bracket As | 1 |
| 17***49 | Bracket As | 1 |
127-9039 Lines Gp-Air
| 12***39 | Lines Group-Air | 1 |
| 15***58 | Air Cleaner Group | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
151-6661 Lines Gp-Muffler Drain
| 15***61 | Lines Group-Muffler Drain | 1 |
135-6552 Manifold Gp-Exhaust
| 11***87 | Bolt; (M6x0.04x10.4-mm)(6mm X 0.04 Thd) | 1 |
| 13***52 | Manifold Group-Exhaust | 1 |
| 13***50 | Clamp As-Compressor | 1 |
151-6657 Mounting Gp-Air Cleaner
| 15***57 | Mounting Group-Air Cleaner | 1 |
| 19***23 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
151-6649 Muffler Gp
| 15***49 | Muffler Group | 1 |
| 18***95 | Vent As | 1 |
| 19***98 | Elbow | 1 |
196-8202 Muffler Gp
| 19***02 | Muffler Group | 1 |
| 1R***62 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 2 |
194-7923 Turbocharger Gp
| 12***75 | Bowl As-Water Collection; (Water Separator, Fuel Filter) | 1 |
| 13***73 | Element; (Filter) (Fuel/Water Separator) (Primary) | 1 |
| 14***84 | Kit-Fuel Filter & Waterseparator; (Incl Seal & Gasket) | 0 |
197-0868 Turbocharger Gp
| 10***72 | Spacer; (9.8x15.85x37.6-mm Thk) | 1 |
| 19***68 | Turbocharger Group | 1 |
| 21***25 | Injector Group-Fuel | 1 |
Basic Engine
133-9907 Adapter Gp-Pump Drive
| 13***06 | Adapter | 1 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
| 1B***67 | Ball Bearing | 2 |
122-1248 Base Gp-Valve Cover & Inj Harn
| 10***18 | Clip | 3 |
| 10***19 | Clip | 3 |
| 12***48 | Base Group-Valve Cover & Inj Harn | 1 |
185-9699 Camshaft Gp
| 10***89 | Cover | 1 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 3 |
| 18***99 | Camshaft Group; (Single) | 1 |
107-6736 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 10***36 | Cover Group-Cylinder Block; -Remote | 1 |
| 4N***99 | Gasket; (Oil Drain) | 1 |
109-7423 Cover Gp-Cylinder Block
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***23 | Cover Group-Cylinder Block | 1 |
| 10***24 | Cover-Cylinder Block | 1 |
150-4278 Cover Gp-Front Housing
| 10***45 | Seal-Accessory Cover | 1 |
| 14***01 | Cover | 1 |
| 14***38 | Screw-Button Head | 3 |
150-3344 Cover Gp-Front Housing
| 11***18 | Cover | 1 |
| 11***19 | Gasket | 1 |
| 15***44 | Cover Group-Front Housing | 1 |
187-1326 Cover Gp-Valve Mechanism
| 17***27 | Seal | 1 |
| 17***90 | Fastener As | 6 |
| 18***25 | Cover As-Valve | 1 |
187-1327 Cover Gp-Valve Mechanism
| 13***20 | Crankshaft As | 1 |
| 18***27 | Cover Group-Valve Mechanism | 1 |
| 1W***02 | Gear-Crankshaft; (80-Teeth) | 1 |
150-3135 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 15***57 | Cover-Valve Mech | 1 |
| 15***35 | Cover Group-Valve Mechanism | 1 |
341-6804 Cover Gp-Valve Mechanism
| 11***20 | Seal-O-Ring; (Mid-Liner) | 6 |
| 13***17 | Seal D-Ring | 6 |
| 13***81 | Liner-Cylinder Block | 6 |
137-7298 Crankshaft Gp
| 10***99 | Plug | 2 |
| 11***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 13***98 | Crankshaft Group | 1 |
202-1255 Cylinder Block As
| 10***99 | Plug | 2 |
| 11***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 14***29 | Seal; (Drainback) | 1 |
137-8469 Cylinder Block Gp
| 13***69 | Cylinder Block Group | 1 |
| 16***81 | Cap-Crankshaft Bearing | 7 |
| 16***83 | Bolt; (7/8-14x7.5-In) | 14 |
202-1254 Cylinder Block Gp
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
137-8471 Cylinder Block Gp
| 00***17 | Elbow | 1 |
| 03***78 | Connector-Filtered Fuel To Adapter | 1 |
| 10***25 | Stud; (3/8-16x1.25-In) | 1 |
135-6531 Cylinder Head Gp
| 10***29 | Seal-Valve Stem | 24 |
| 13***31 | Cylinder Head Group | 1 |
| 15***23 | Valve; (Inlet) | 12 |
183-5296 Cylinder Head Gp
| 15***34 | Damper As | 1 |
| 18***96 | Cylinder Head Group | 1 |
| 21***77 | Adapter; (Spun Steel) | 1 |
176-9918 Cylinder Head Gp
| 14***25 | Pulley-Crankshaft; (Cast Iron) | 1 |
| 15***34 | Damper As | 1 |
| 17***18 | Cylinder Head Group | 1 |
172-6764 Damper & Pulley Gp
| 09***24 | Ring; (Retaining) | 1 |
| 13***49 | Spacer; (45x53x10-mm Thk) | 2 |
| 13***51 | Seal; (Lip Type) | 1 |
295-9637 Drive Gp-Fan
| 29***37 | Drive Group-Fan | 1 |
| 5J***94 | Screw,Cap,Socket He Manifold Mtg | 12 |
| 8L***13 | Strap-Cable(Tie 5.50" Long) | 6 |
200-3313 Drive Gp-Fan
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 20***13 | Drive Group-Fan | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 2 |
4p-6846 Fastener Gp-Front Housing
| 0V***23 | Bolt 4.25 In. (10.795 cm) Long | 12 |
| 19***13 | Flywheel As | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 12 |
109-1657 Fastener Gp-Valve Mechanism
| 10***26 | Dowel | 1 |
| 10***57 | Fastener Group-Valve Mechanism | 1 |
| 9X***72 | Bolt-Locking; (3/8-16x0.875-In) | 16 |
194-7097 Flywheel Gp
| 03***85 | Bolt-12 Point Hd-Engine Flywheel To | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***68 | Bearing-Sleeve | 1 |
204-2114 Gear Gp-Camshaft
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
137-5921 Gear Gp-Front
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
4p-9823 Gear Gp-Rear
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
351-0059 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 10***86 | Eye-Lifting | 1 |
| 35***59 | Housing Group-Flywheel | 1 |
7e-8996 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
172-4850 Housing Gp-Front
| 16***81 | Rocker Arm Group | 3 |
| 17***50 | Housing Group-Front | 1 |
| 6I***58 | Bridge-Valve | 12 |
111-2088 Lifting Gp-Engine
| 11***88 | Lifting Group-Engine; (Rear) | 1 |
| 27***31 | Rocker Arm Group | 3 |
| 6I***58 | Bridge-Valve | 12 |
112-2418 Lifting Gp-Engine
| 11***18 | Lifting Group-Engine | 1 |
| 32***37 | Rocker Arm Group | 3 |
| 6I***58 | Bridge-Valve | 12 |
148-7482 Mechanism Gp-Fuel Pump & Valve
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 18 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
6i-1940 Mechanism Gp-Fuel Pump & Valve
| 13***73 | Support As | 6 |
| 14***82 | Mount-Flexible | 6 |
| 14***83 | Mount-Flexible | 6 |
151-6660 Mounting Gp-Engine
| 13***05 | Ring-Piston; (Oil Control) | 1 |
| 14***30 | Ring-Piston; (Intermediate) | 1 |
| 15***25 | Bolt; (7/16-14-2a-Thd) | 1 |
166-1327 Mounting Gp-Refrigerant Compr
| 12***91 | Pulley; (8-Groove)(Alternator) | 1 |
| 13***23 | Pulley As; (Idler) | 2 |
| 14***31 | Support-Alternator | 1 |
219-1494 Pan Gp-Oil
| 03***13 | Seal-O-Ring | 2 |
| 06***39 | Seal-O-Ring | 2 |
| 19***51 | Button; (24-mm Od) | 2 |
172-9944 Pan Gp-Oil
| 03***13 | Seal-O-Ring | 2 |
| 10***70 | Button | 4 |
| 16***74 | Rocker Arm As; (Unit Injector) | 2 |
134-3071 Piston & Rod Gp
| 06***39 | Seal-O-Ring | 2 |
| 13***71 | Piston & Rod Group | 1 |
| 19***51 | Button; (24-mm Od) | 2 |
353-9978 Plate As-Front Housing
| 25***21 | Button | 1 |
| 27***91 | Screw-Arm Adjustment; (3/8-24x1.20-In) | 1 |
| 27***17 | Nut; (3/8-24-Thd) | 1 |
166-1321 Pulley Gp
| 16***21 | Pulley Group | 1 |
| 30***22 | Shaft As-Rocker Arm, Exhaust Manifold | 1 |
| 32***96 | Rocker Arm Group; -Intake | 2 |
163-7381 Rocker Arm Gp
| 06***39 | Seal-O-Ring | 1 |
| 16***81 | Rocker Arm Group | 1 |
| 19***51 | Button; (24-mm Od) | 1 |
328-4237 Rocker Arm Gp
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 15***80 | Elbow | 1 |
320-2796 Rocker Arm Gp
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 8 |
| 32***96 | Rocker Arm Group; -Intake | 1 |
| 6F***82 | Bolt 13.3 cm(5.25 In.) Long-Location "A" | 8 |
328-4238 Rocker Arm Gp
| 17***63 | Base Group-Oil Filter; -Engine | 1 |
| 1P***67 | Plunger; (Engine Oil Cooler Relief Valve) | 2 |
| 2P***04 | Stud-Hollow; (1.5-16x1.339-In) | 1 |
198-9898 Rocker Arm Gp
| 19***98 | Rocker Arm Group | 1 |
| 25***21 | Button | 1 |
| 27***91 | Screw-Arm Adjustment; (3/8-24x1.20-In) | 1 |
278-1931 Rocker Arm Gp
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 27***31 | Rocker Arm Group | 1 |
328-4239 Rocker Arm Gp
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 32***39 | Rocker Arm Group | 1 |
319-7401 Seal Gp-Crankshaft
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 16***61 | Cap As-Engine Oil Filler; (Engine Oil) | 1 |
| 17***25 | Tube As | 1 |
7e-4876 Support Gp-Engine
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 2 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
Cooling System
202-2973 Cooling Ar
| 10***77 | Seal-O-Ring; (100.97mm Id) | 1 |
| 12***72 | Seal-O-Ring (215.49mm Id) | 1 |
| 13***25 | Pump Group-Water | 1 |
151-6652 Fan Gp-Suction
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***30 | Bearing As-Roller | 1 |
| 12***17 | Seal Group; (Water Pump) | 1 |
109-9997 Fitting Gp-Radiator Vent
| 10***58 | End-Hose | 1 |
| 10***97 | Fitting Group-Radiator Vent | 1 |
| 14***67 | Clamp; (Hose) | 1 |
187-6662 Lines Gp-Water
| 09***35 | Clamp | 2 |
| 09***01 | Cap-Radiator | 1 |
| 18***62 | Lines Group-Water | 1 |
159-3956 Lines Gp-Water
| 10***58 | End-Hose | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 15***56 | Lines Group-Water | 1 |
135-4925 Pump Gp-Water
| 09***35 | Clamp | 2 |
| 09***01 | Cap-Radiator | 1 |
| 13***25 | Pump Group-Water | 1 |
100-9347 Pump Gp-Water
| 10***47 | Pump Group-Water | 1 |
| 10***58 | End-Hose | 1 |
| 14***67 | Clamp; (Hose) | 1 |
210-8025 Radiator & Aftercooler Gp
| 09***35 | Clamp | 2 |
| 09***01 | Cap-Radiator | 1 |
| 21***94 | Drain As | 1 |
151-6651 Radiator & Aftercooler Gp
| 09***35 | Clamp | 2 |
| 09***01 | Cap-Radiator | 1 |
| 15***51 | Radiator & Aftercooler Group | 1 |
210-8027 Radiator Gp
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 14***42 | U-Bolt | 2 |
| 17***27 | Pipe As | 1 |
210-8026 Radiator Gp
| 09***92 | Clamp, Hose | 1 |
| 10***73 | Clip | 1 |
| 17***17 | Hose | 1 |
196-8051 Radiator Gp
| 10***69 | Filter Element As-Air; (Primary) | 1 |
| 10***73 | Filter Element As-Air; (Secondary) | 1 |
| 11***76 | Cover As | 1 |
210-7996 Radiator Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 12***32 | Elbow | 1 |
210-7989 Radiator Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 21***89 | Radiator Group | 1 |
| 5H***04 | Packing,Preformed Elbow Part Of Kit P/N 5r***26 | 2 |
196-8182 Radiator Gp
| 19***82 | Radiator Group | 1 |
| 25***85 | Pipe As-Exhaust | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
Electrical And Starting System
132-1829 Alarm Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 13***29 | Alarm Group; -Overload Warning | 1 |
| 16***26 | Bracket | 1 |
170-6979 Alarm Gp-Travel
| 09***63 | Grommet | 1 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
177-9953 Alternator Gp-Charging
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***87 | Spacer; (8.2x12.7x43.6-mm) | 4 |
| 15***06 | Control Group-Unprogrammed | 1 |
166-1325 Alternator Gp-Charging
| 09***63 | Grommet | 1 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
3e-7577 Alternator Gp-Charging
| 09***63 | Grommet | 1 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
170-6853 Battery & Wiring Gp
| 17***53 | Battery & Wiring Group | 1 |
| 21***50 | Control Group-Engine Electronic | 1 |
204-1940 Battery & Wiring Gp
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 20***40 | Battery & Wiring Group | 1 |
| 6V***03 | Kit; (Retaining Bolt) (Each Includes Bolt, Retaining Ring And 4 O-Ring Seals) | 2 |
180-0398 Control & Mtg Gp-Engine Elek
| 16***67 | Converter-Power; (24-Volt To 12-Volt) | 1 |
| 18***98 | Control & Mtg Group-Engine Elek | 1 |
| 8T***71 | Capscrew; (Hex Hd) (M6 X 1.00 X 12mm, G10.9, Z) | 4 |
171-2592 Control & Mtg Gp-Machine
| 16***39 | Electronics Group-Monitor | 1 |
| 17***92 | Control & Mtg Group-Machine | 1 |
| 17***59 | Electronics Group-Machine | 1 |
212-9450 Control Gp-Engine Electronic
| 21***50 | Control Group-Engine Electronic | 1 |
| 29***60 | Software Group-Machine | 1 |
115-3055 Control Gp-Engine Electronic
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 31***77 | Software Group-Machine | 1 |
| 31***78 | Service Group-Machine | 1 |
150-7021 Converter Gp-Electrical
| 15***21 | Converter Group-Electrical | 1 |
| 17***10 | Module Group-Message Center | 1 |
| 18***38 | Software Group-Monitor; (Message Center) | 1 |
204-1681 Converter Gp-Electrical
| 20***81 | Converter Group-Electrical | 1 |
| 22***70 | Software Group-Monitor; (Vids) | 1 |
| 22***71 | Service Group-Monitor | 1 |
116-0136 Converter Gp-Electrical
| 11***36 | Converter Group-Electrical | 1 |
| 29***62 | Software Group-Machine | 1 |
164-8237 Electrical Ar
| 16***37 | Electrical Ar | 1 |
| 24***59 | Software Group-Monitor; (Software Only) | 1 |
| 24***60 | Control Group-Electronic; (Includes Software) | 1 |
171-2659 Electronics Gp-Machine
| 17***59 | Electronics Group-Machine | 1 |
| 21***71 | Software Group-Monitor | 1 |
| 21***72 | Service Group-Monitor | 1 |
290-9361 Electronics Gp-Machine -Control Valve
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
| 17***18 | Band | 1 |
290-9359 Electronics Gp-Machine -Valve Control
| 22***76 | Software Group-Monitor | 1 |
| 22***77 | Service Group-Monitor | 1 |
| 29***59 | Electronics Group-Machine; -Valve Control | 1 |
211-5595 Electronics Gp-Monitor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***85 | Bracket As | 2 |
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 2 |
211-5593 Electronics Gp-Monitor
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
| 17***18 | Band | 1 |
164-8239 Electronics Gp-Monitor
| 16***39 | Electronics Group-Monitor | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
211-5594 Electronics Gp-Monitor
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 21***94 | Electronics Group-Monitor | 1 |
211-5596 Electronics Gp-Monitor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***05 | Harness As | 1 |
| 15***24 | Lamp Group-Flood; -Boom, Stick | 2 |
153-2523 Lamp Gp-Flood
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***36 | Clip | 15 |
153-2521 Lamp Gp-Flood
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***36 | Clip | 17 |
153-2524 Lamp Gp-Flood
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***36 | Clip | 22 |
145-0527 Lighting Gp-Flood
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 4 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 4 |
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 8 |
150-7033 Lighting Gp-Chassis
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***68 | Board Assembly | 1 |
| 15***33 | Lighting Group-Chassis; -Front | 1 |
170-6915 Lighting Gp-Flood
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***15 | Lighting Group-Flood | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
153-2595 Lighting Gp-Flood
| 15***95 | Lighting Group-Flood | 1 |
| 16***93 | Adapter | 1 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
170-6914 Lighting Gp-Flood
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***14 | Lighting Group-Flood | 1 |
| 8T***37 | Plug-Seal; (40 Pin Connector) | 8 |
145-0544 Lighting Gp-Flood
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 4 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 4 |
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 7 |
149-2356 Module Gp-Vids/Vims Interface
| 14***56 | Module Group-Vids/Vims Interface | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
204-1939 Panel Gp-Circuit Breaker
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 20***39 | Panel Group-Circuit Breaker | 1 |
102-7664 Sensor & Mtg Gp-Pressure
| 10***64 | Sensor & Mtg Group-Pressure; -Atmospheric Air | 1 |
145-3105 Sensor Gp-Position
| 14***05 | Sensor Group-Position | 1 |
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
| 1V***41 | Seal | 1 |
194-6724 Sensor Gp-Pressure
| 13***60 | Bracket | 1 |
| 18***29 | Harness As-Sensor; (Speed) | 1 |
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
194-6725 Sensor Gp-Pressure -Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***61 | Bracket | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
194-6722 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 17***49 | Strap; (Marker) | 1 |
201-6615 Sensor Gp-Speed
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
171-8963 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***84 | Switch As-Rocker; (Starting Aid Ether) | 1 |
| 11***73 | Connector; (Receptacle) | 1 |
189-5746 Sensor Gp-Speed
| 17***53 | Battery & Wiring Group | 1 |
| 17***33 | Box & Mounting Group | 1 |
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
142-8394 Sensor Gp-Speed
| 14***94 | Sensor Group-Speed; -Secondary, Timing | 1 |
| 14***28 | Washer-Spring | 1 |
| 14***50 | Coil As | 1 |
142-8393 Sensor Gp-Speed
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***93 | Sensor Group-Speed; -Primary, Timing | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
201-6617 Sensor Gp-Speed
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
102-2240 Sensor Gp-Temperature
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 10***28 | Wire As | 1 |
| 4N***59 | Gasket; (Starting Motor) | 1 |
156-2829 Solenoid Gp
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
151-6665 Starting Aid Gp-Ether
| 15***65 | Starting Aid Group-Ether | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
180-6783 Starting Ar-Cold Weather
| 18***83 | Starting Ar-Cold Weather | 1 |
| 2H***22 | Lockwasher | 1 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
105-4729 Starting Motor Gp-Electric
| 10***29 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
6v-0890 Starting Motor Gp-Electric
| 2L***76 | Terminal; (14-Ga To 16-Ga, No. 10 Screw)(Alternator Harness To Alt. Neg) | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
237-1962 Starting Motor Gp-Electric
| 12***00 | Strap; (Marked Z) | 1 |
| 13***29 | Alarm Group; -Overload Warning | 1 |
| 14***92 | Harness As | 1 |
338-3454 Starting Motor Gp-Electric
| 09***72 | Grommet | 1 |
| 12***00 | Strap; (Marked Z) | 1 |
| 13***29 | Alarm Group; -Overload Warning | 1 |
5c-6108 Switch Gp-Refueling -Fuel Tank Shutoff
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
7n-0719 Switch Gp-Disconnect -Battery
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
125-1302 Switch Gp-Magnetic
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 18***49 | Wiring Group-Console; -Rh | 1 |
| 18***50 | Wiring Group-Console; -Lh | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
145-0523 Wiring Gp-Cab
| 14***23 | Wiring Group-Cab | 1 |
| 14***26 | Wiring Group-Console; -Rh | 1 |
| 20***93 | Wiring Group-Console; -Lh | 2 |
161-3062 Wiring Gp-Cab
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
183-1045 Wiring Gp-Cab Riser
| 11***82 | Strap | 1 |
| 11***33 | Converter-Power; (24-Volt To 12-Volt) | 1 |
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
204-1793 Wiring Gp-Console -Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
186-4650 Wiring Gp-Console -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***36 | Clip | 5 |
186-4648 Wiring Gp-Console
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 5 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
145-0526 Wiring Gp-Console -Rh
| 11***36 | Clip | 1 |
| 11***21 | Switch As-Toggle; (Counterweight Removal) | 1 |
| 11***18 | Clip | 1 |
204-1792 Wiring Gp-Console
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***36 | Clip | 12 |
186-4649 Wiring Gp-Console -Rh
| 11***36 | Clip | 9 |
| 11***18 | Clip | 2 |
| 17***88 | Harness As | 1 |
145-0540 Wiring Gp-Converter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***36 | Clip | 3 |
| 11***73 | Connector; (Receptacle) | 1 |
170-6854 Wiring Gp-Counterweight
| 11***36 | Clip | 3 |
| 11***95 | Switch As | 1 |
| 11***96 | Harness As-Wiring; (Refueling Pump, Start) | 1 |
172-4294 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***36 | Clip | 3 |
| 11***95 | Switch As | 1 |
197-4346 Wiring Gp-Lubrication
| 19***46 | Wiring Group-Lubrication | 1 |
| 19***51 | Drive Group-Final | 1 |
183-1076 Wiring Gp-Lubrication
| 09***28 | Washer; (53x84x1-mm Thk) | 6 |
| 09***91 | Pin - Spring | 3 |
| 09***16 | Setscrew-Socket; (M12x1.75x12-mm) | 2 |
259-4945 Wiring Gp-Lubrication
| 15***98 | Motor & Mtg Group-Travel | 1 |
| 19***51 | Drive Group-Final | 1 |
| 25***45 | Wiring Group-Lubrication | 1 |
170-6987 Wiring Gp-Lubrication
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 17***87 | Wiring Group-Lubrication | 1 |
170-6983 Wiring Gp-Overload Warning
| 09***91 | Pin - Spring | 3 |
| 09***16 | Setscrew-Socket; (M12x1.75x12-mm) | 2 |
| 09***94 | Pin-Spring | 7 |
170-6980 Wiring Gp-Refueling Pump
| 14***14 | Sprocket Group | 2 |
| 14***97 | Drive Group-Swing | 1 |
| 14***25 | Drive Group-Swing, Piston | 1 |
170-6991 Wiring Gp-Work Tool
| 14***70 | Bolt | 28 |
| 17***91 | Wiring Group-Work Tool | 1 |
| 19***01 | Spacer; (31.5x56x5-mm Thk) | 28 |
Engine Arrangement
151-6648 Engine Ar
| 15***48 | Engine Ar | 1 |
| 15***49 | Muffler Group | 1 |
| 16***00 | Engine Ar-Complete | 1 |
160-6900 Engine Ar-Complete
| 10***65 | Pump Group-Fuel Transfer | 1 |
| 10***47 | Pump Group-Water | 1 |
| 10***64 | Sensor & Mtg Group-Pressure; -Atmospheric Air | 1 |
159-5810 Engine Ar-Core
| 12***48 | Base Group-Valve Cover & Inj Harn | 1 |
| 12***10 | Injector Group-Fuel | 6 |
| 13***71 | Piston & Rod Group | 6 |
151-6650 Installation Ar-Engine
| 15***50 | Installation Ar-Engine | 1 |
| 15***51 | Radiator & Aftercooler Group | 1 |
| 15***52 | Fan Group-Suction | 1 |
Frame And Body
177-5633 Box & Mounting Gp
| 17***04 | Counterweight As | 1 |
| 17***77 | Spacer; (39x100x50-mm Thk) | 6 |
| 17***33 | Box & Mounting Group | 1 |
170-2807 Box & Mtg Gp-Storage
| 17***07 | Box & Mtg Group-Storage | 1 |
| 17***77 | Spacer; (39x100x50-mm Thk) | 6 |
| 18***12 | Nameplate | 1 |
168-1722 Box & Mtg Gp-Storage
| 16***22 | Box & Mtg Group-Storage | 1 |
| 17***77 | Spacer; (39x100x50-mm Thk) | 6 |
| 19***20 | Bolt; (M36x4x560-mm) | 6 |
214-8033 Box Gp-Battery
| 13***73 | Bolt As; (M12x1.75x25-mm) | 5 |
| 18***85 | Cover As | 1 |
| 21***33 | Box Group-Battery | 1 |
170-2808 Box Gp-Storage
| 13***55 | Bolt; (M8x1.25x8-mm) | 8 |
| 17***08 | Box Group-Storage | 1 |
| 17***33 | Cover As | 1 |
197-2173 Chain Gp-Counterweight
| 10***48 | Seal; (0.5-M Each) | 0 |
| 19***73 | Chain Group-Counterweight | 1 |
| 20***97 | Insulation | 1 |
157-9989 Counterweight Ar
| 10***48 | Seal; (0.5-M Each) | 1 |
| 15***89 | Counterweight Ar | 1 |
| 18***58 | Sheet-Rubber | 1 |
168-1710 Counterweight Gp
| 16***10 | Counterweight Group | 1 |
| 17***81 | Insulation; (325mm X 430mm) | 1 |
| 17***82 | Insulation | 3 |
203-5317 Counterweight Gp
| 08***65 | Door As | 1 |
| 11***70 | Pin As | 2 |
| 12***62 | Shim (1.0 mm Thick) | 4 |
184-9124 Counterweight Gp
| 08***65 | Door As | 1 |
| 11***70 | Pin As | 2 |
| 12***62 | Shim (1.0 mm Thick) | 4 |
199-0071 Cover Gp-Control Valve
| 19***71 | Cover Group-Control Valve | 1 |
| 19***00 | Bolt-Special | 48 |
| 19***01 | Spacer; (31.5x56x5-mm Thk) | 122 |
184-9091 Cover Gp-Hood
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 18***91 | Cover Group-Hood | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
203-5096 Door As-Access
| 19***92 | Gear & Bearing Group-Swing | 1 |
| 20***96 | Door As-Access; -Engine Compartment | 1 |
| 22***99 | Gear & Bearing Group-Swing | 1 |
203-5101 Door As-Access
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 20***01 | Door As-Access | 1 |
| 22***77 | Seal-Dust | 1 |
177-5580 Door Gp-Access
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 56 |
| 13***77 | Bolt As; (M12x1.75x35-mm) | 25 |
| 13***89 | Sheet | 1 |
158-3896 Frame Gp-Upper
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 56 |
| 13***77 | Bolt As; (M12x1.75x35-mm) | 25 |
| 13***89 | Sheet | 1 |
195-5493 Frame Gp-Upper
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 2 |
| 10***40 | Cover As | 1 |
| 10***41 | Spacer (17mm Id) | 10 |
148-4650 Gear & Bearing Gp-Swing
| 14***50 | Gear & Bearing Group-Swing | 1 |
| 14***77 | Handrail As | 1 |
| 19***29 | Handrail As | 1 |
227-6098 Gear & Bearing Gp-Swing
| 09***43 | Pin-Cotter | 1 |
| 09***20 | Knob | 1 |
| 09***72 | Grommet | 1 |
227-6099 Gear & Bearing Gp-Swing
| 09***43 | Pin-Cotter | 1 |
| 09***20 | Knob | 1 |
| 09***72 | Grommet | 1 |
199-4492 Gear & Bearing Gp-Swing
| 09***72 | Grommet | 1 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 10 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 84 |
237-8773 Guard Gp-Bottom
| 09***72 | Grommet | 1 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 4 |
| 17***98 | Insulation | 1 |
168-1716 Guard Gp-Bottom
| 09***19 | Pin, Clevis; (Clevis) | 2 |
| 09***20 | Pin-Clevis | 2 |
| 09***74 | Pin; (Cotter) | 4 |
172-2954 Guard Gp-Swivel
| 13***00 | Liner | 1 |
| 17***54 | Guard Group-Swivel | 1 |
| 17***35 | Liner | 1 |
168-1718 Handrail Gp
| 09***92 | Locknut; (M6x1-Thd) | 8 |
| 12***60 | Lever As | 1 |
| 13***88 | Shim (1.6mm Thick) | 1 |
184-9122 Hood & Guard Gp
| 08***91 | Tube As | 1 |
| 10***09 | Connector As | 3 |
| 10***10 | Connector As | 4 |
168-1717 Hood & Guard Gp
| 10***00 | Valve As-Lube Distribution; (6-Injector) | 1 |
| 10***09 | Connector As | 8 |
| 10***10 | Connector As | 10 |
184-9121 Hood & Guard Gp
| 10***00 | Valve As-Lube Distribution; (6-Injector) | 1 |
| 10***09 | Connector As | 6 |
| 10***10 | Connector As | 10 |
177-5663 Hood Gp-Engine
| 08***38 | Plate As | 1 |
| 10***09 | Connector As | 2 |
| 10***10 | Connector As | 4 |
177-5634 Hood Gp-Engine
| 10***09 | Connector As | 4 |
| 10***10 | Connector As | 6 |
| 10***11 | Sleeve; (6.5mm Id) | 4 |
175-0640 Hood Gp-Engine
| 10***09 | Connector As | 3 |
| 10***10 | Connector As | 4 |
| 10***11 | Sleeve; (6.5mm Id) | 4 |
203-7451 Lines Gp-Grease
| 10***09 | Connector As | 7 |
| 10***10 | Connector As | 8 |
| 10***11 | Sleeve; (6.5mm Id) | 4 |
174-8475 Lines Gp-Grease
| 17***56 | Lubrication Group-Automatic | 1 |
| 17***67 | Lines Group-Grease; -Autolube, Boom | 1 |
| 17***71 | Lines Group-Grease | 1 |
174-8467 Lines Gp-Grease
| 08***38 | Plate As | 1 |
| 10***09 | Connector As | 4 |
| 10***10 | Connector As | 4 |
174-8476 Lines Gp-Grease
| 17***87 | Wiring Group-Lubrication | 1 |
| 17***56 | Lubrication Group-Automatic | 1 |
| 17***68 | Lines Group-Grease; -Autolube, Boom | 1 |
174-8471 Lines Gp-Grease
| 17***56 | Lubrication Group-Automatic | 1 |
| 17***69 | Lines Group-Grease; -Autolube, Mass Boom | 1 |
| 17***71 | Lines Group-Grease | 1 |
174-8468 Lines Gp-Grease
| 08***38 | Plate As | 1 |
| 10***09 | Connector As | 2 |
| 10***10 | Connector As | 4 |
174-8470 Lines Gp-Grease
| 17***56 | Lubrication Group-Automatic | 1 |
| 17***69 | Lines Group-Grease; -Autolube, Mass Boom | 1 |
| 17***70 | Lines Group-Grease | 1 |
174-8473 Lines Gp-Grease
| 17***56 | Lubrication Group-Automatic | 1 |
| 17***67 | Lines Group-Grease; -Autolube, Boom | 1 |
| 17***70 | Lines Group-Grease | 1 |
174-8469 Lines Gp-Grease
| 17***87 | Wiring Group-Lubrication | 1 |
| 17***56 | Lubrication Group-Automatic | 1 |
| 17***68 | Lines Group-Grease; -Autolube, Boom | 1 |
157-9995 Lubrication Ar-Automatic
| 09***86 | Washer-Plated; (11x25x4.5-mm Thk) | 8 |
| 15***05 | Support As | 1 |
| 15***08 | Lubrication Group-Electric | 1 |
157-9994 Lubrication Ar-Automatic
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***09 | Connector As | 6 |
| 10***10 | Connector As | 8 |
172-4965 Lubrication Ar-Automatic
| 09***86 | Washer-Plated; (11x25x4.5-mm Thk) | 8 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 15***05 | Support As | 1 |
202-2932 Lubrication Ar-Automatic
| 09***03 | Seal-O-Ring | 1 |
| 10***89 | Motor As-Lubrication | 1 |
| 10***90 | Valve As-Lubrication | 1 |
172-4966 Lubrication Ar-Automatic
| 10***88 | Motor Group-Lubrication | 1 |
| 10***91 | Pump Group-Lubrication | 1 |
| 10***94 | Valve As; (Manual) | 1 |
157-9993 Lubrication Ar-Automatic
| 10***09 | Connector As | 4 |
| 10***10 | Connector As | 8 |
| 10***11 | Sleeve; (6.5mm Id) | 4 |
245-5597 Lubrication Gp-Automatic
| 13***03 | Valve Assem. | 1 |
| 13***04 | Element As; (Automatic Lubrication) | 1 |
| 13***05 | Cap As | 1 |
172-4956 Lubrication Gp-Automatic
| 09***40 | Pin-Cotter | 1 |
| 10***92 | Rod | 1 |
| 10***93 | Washer | 1 |
152-9608 Lubrication Gp-Electric
| 15***08 | Lubrication Group-Electric | 1 |
| 17***88 | Liner | 1 |
| 17***89 | Liner | 1 |
152-9604 Lubrication Gp-Electric
| 09***19 | Ring-Retaining | 1 |
| 09***34 | Seal-O-Ring | 2 |
| 10***71 | Roller As | 1 |
105-6988 Motor Gp-Lubrication
| 10***88 | Motor Group-Lubrication | 1 |
| 13***06 | Liner | 1 |
| 17***74 | Liner | 1 |
172-6091 Panel Gp-Sound Suppression
| 16***27 | Liner | 2 |
| 17***91 | Panel Group-Sound Suppression | 1 |
| 17***32 | Liner | 2 |
202-2977 Pump Gp-Lubrication
| 17***77 | Insulation | 1 |
| 19***87 | Sheet-Rubber | 1 |
| 20***77 | Pump Group-Lubrication | 1 |
202-2916 Pump Gp-Lubrication
| 17***16 | Insulation | 1 |
| 17***17 | Insulation | 1 |
| 19***06 | Sheet-Rubber | 1 |
105-6991 Pump Gp-Lubrication
| 10***91 | Pump Group-Lubrication | 1 |
| 17***97 | Liner | 1 |
| 17***85 | Liner | 1 |
152-9610 Reel Gp-Hose
| 15***10 | Reel Group-Hose; -Grease | 1 |
| 18***85 | Liner | 1 |
| 18***86 | Liner | 1 |
214-8387 Sheet As-Sound Suppression
| 14***08 | Idler Group-Front | 1 |
| 14***12 | Roller Ar-Track & Carrier | 1 |
| 14***50 | Gear & Bearing Group-Swing | 1 |
214-8011 Sheet As-Sound Suppression
| 13***06 | Liner | 1 |
| 17***74 | Liner | 1 |
| 17***61 | Liner | 1 |
175-0830 Sheet As-Sound Suppression
| 17***08 | Liner | 1 |
| 17***30 | Sheet As-Sound Suppression | 1 |
| 17***43 | Liner | 1 |
175-0797 Sheet As-Sound Suppression
| 17***97 | Sheet As-Sound Suppression | 1 |
| 17***11 | Insulation | 1 |
| 17***12 | Insulation | 1 |
218-7758 Sheet As-Sound Suppression
| 10***47 | Plug | 24 |
| 10***11 | Spacer; (37x70x65-mm Thk) | 36 |
| 14***00 | Step | 4 |
218-7761 Sheet As-Sound Suppression
| 10***47 | Plug | 24 |
| 10***11 | Spacer; (37x70x65-mm Thk) | 36 |
| 14***00 | Step | 3 |
203-4880 Sheet As-Sound Suppression
| 17***34 | Insulation | 1 |
| 20***80 | . Rotor, Sheet As-Sound Suppression | 1 |
| 21***92 | Sheet-Rubber | 1 |
175-0876 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 17***76 | Sheet As-Sound Suppression | 1 |
| 4I***24 | Washer; (4.5x40x1.2-mm Thk) | 4 |
214-8389 Sheet As-Sound Suppression
| 14***13 | Roller Ar-Track & Carrier | 1 |
| 14***15 | Idler Group-Front | 1 |
| 14***50 | Gear & Bearing Group-Swing | 1 |
214-8383 Sheet As-Sound Suppression
| 21***83 | Sheet As-Sound Suppression | 1 |
| 21***86 | Cover | 4 |
| 7X***52 | Bolt-Plt; (M16 X 2.0 X 30) | 16 |
175-0786 Sheet As-Sound Suppression
| 17***86 | Sheet As-Sound Suppression | 1 |
| 17***07 | Insulation | 1 |
| 17***32 | Liner | 1 |
214-8378 Sheet As-Sound Suppression
| 17***99 | Handrail As | 1 |
| 21***78 | Sheet As-Sound Suppression | 1 |
| 29***98 | Walkway As | 1 |
175-0976 Sheet As-Sound Suppression
| 17***89 | Liner | 1 |
| 17***76 | Sheet As-Sound Suppression | 1 |
| 21***86 | Sheet-Rubber | 1 |
214-8016 Sheet As-Sound Suppression
| 17***08 | Liner | 1 |
| 17***43 | Liner | 1 |
| 17***61 | Liner | 1 |
184-8884 Sheet As-Sound Suppression
| 17***34 | Insulation | 1 |
| 18***84 | Sheet As-Sound Suppression | 1 |
| 21***88 | Sheet-Rubber | 1 |
175-0913 Sheet As-Sound Suppression
| 17***13 | Sheet As-Sound Suppression | 1 |
| 19***75 | Sheet-Rubber | 1 |
| 21***82 | Sheet-Rubber | 1 |
214-8381 Sheet As-Sound Suppression
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 13***42 | Piston | 1 |
| 13***43 | Seal-Lip Type | 1 |
168-1721 Walkway Gp
| 14***11 | Spacer; (30.5x55.X24mm Thk) | 8 |
| 16***21 | Walkway Group | 1 |
| 17***08 | Guard As-Track Guide | 2 |
Fuel System
220-2422 Adapter Gp-Fast Fill Fuel
| 03***36 | Connector-O-Ring | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***62 | Elbow, Swivel Nut 45 Degrees (-6) | 1 |
180-6788 Adapter Gp-Fast Fill Fuel
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 09***86 | Clamp; (Hose) | 1 |
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
205-6829 Cooler Gp-Fuel
| 03***36 | Connector-O-Ring | 1 |
| 03***37 | Connector-Port | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
128-1471 Filter Gp-Fuel
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 09***86 | Clamp; (Hose) | 1 |
| 12***71 | Filter Group-Fuel | 1 |
133-5671 Filter Gp-Water Sep & Fuel
| 00***64 | End; (Hose) | 2 |
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 09***86 | Clamp; (Hose) | 4 |
128-8510 Injector Gp-Fuel
| 09***61 | Strap; (Cable) | 6 |
| 12***10 | Injector Group-Fuel | 1 |
| 17***75 | Support As | 1 |
173-0004 Lines Gp-Fuel -Rear
| 17***04 | Lines Group-Fuel; -Rear | 1 |
| 18***23 | Pump As-Fuel Priming | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
208-4100 Lines Gp-Fuel
| 00***07 | Elbow; (90 Degree) | 2 |
| 10***56 | Hose (400cm); (400-cm) | 0 |
| 10***01 | Connector-Hose | 3 |
237-8769 Lines Gp-Fuel
| 09***07 | Shim (0.4mm Thick) | 6 |
| 09***08 | Shim (1.0mm Thick) | 6 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
168-1720 Lines Gp-Fuel
| 16***20 | Lines Group-Fuel | 1 |
| 17***80 | Wiring Group-Refueling Pump | 1 |
| 17***88 | Pump Group-Refueling | 1 |
171-9078 Mounting Gp-Fuel Filter
| 06***13 | Connector-Flared | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
157-9996 Pump Ar-Refueling
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 15***96 | Pump Ar-Refueling | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
183-2824 Pump Gp-Fuel Priming -Manual
| 18***24 | Pump Group-Fuel Priming; -Manual | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
100-4265 Pump Gp-Fuel Transfer
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***65 | Pump Group-Fuel Transfer | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
172-4988 Pump Gp-Refueling
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***88 | Pump Group-Refueling | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
168-1719 Tank & Mtg Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***19 | Tank & Mtg Group-Fuel | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
170-2526 Tank Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***26 | Tank Group-Fuel | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
281-2725 Valve Gp-Check -Fuel
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 16***26 | Bracket | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
233-6742 Valve Gp-Check -Fuel
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
| 10***56 | Diode As; (Alternator) | 1 |
156-5783 Valve Gp-Check
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***83 | Valve Group-Check; -Fuel | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
Hydraulic System
215-4907 Accumulator Gp-Hydraulic
| 15***14 | Film Group | 1 |
| 15***08 | Control Group-Hydraulic Pedal | 1 |
| 17***61 | Lines Group-Front | 1 |
7y-8421 Accumulator Gp-Hydraulic
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 2 |
| 13***28 | Shim; (0.1-mm Thk) | 2 |
| 13***30 | Plate-Slide | 2 |
4i-5690 Accumulator Gp-Hydraulic
| 16***95 | Piston | 1 |
| 16***96 | Rod; (159.2-mm, Oal) | 1 |
| 16***97 | Rod; (159.4-mm, Oal) | 1 |
4i-5756 Accumulator Gp-Hydraulic
| 16***01 | Piston | 1 |
| 16***02 | Rod; (152.2-mm, Oal) | 1 |
| 16***03 | Rod; (151.8-mm, Oal) | 1 |
215-4905 Accumulator Gp-Hydraulic
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 13***28 | Shim; (0.1-mm Thk) | 1 |
| 13***31 | Packing | 1 |
215-4906 Accumulator Gp-Hydraulic
| 15***14 | Film Group | 1 |
| 15***08 | Control Group-Hydraulic Pedal | 1 |
| 16***78 | Lines Group-Front; -Common | 1 |
209-5982 Actuator Gp
| 15***15 | Film Group | 1 |
| 15***09 | Control Group-Hydraulic Pedal | 1 |
| 17***61 | Lines Group-Front | 1 |
158-9104 Actuator Gp-Pump
| 13***82 | Bolt; (M16x2x100-mm) | 2 |
| 13***33 | Adapter-Fan | 1 |
| 13***53 | Lockwasher | 1 |
158-9103 Actuator Gp-Pump
| 15***15 | Film Group | 1 |
| 15***09 | Control Group-Hydraulic Pedal | 1 |
| 15***03 | Actuator Group-Pump; -Maximum Angle | 1 |
129-8053 Base Gp-Oil Filter -Hydraulic
| 12***53 | Base Group-Oil Filter; -Hydraulic | 1 |
| 13***82 | Bolt; (M16x2x100-mm) | 2 |
| 13***33 | Adapter-Fan | 1 |
173-3503 Base Gp-Oil Filter -Hydraulic
| 13***82 | Bolt; (M16x2x100-mm) | 2 |
| 13***33 | Adapter-Fan | 1 |
| 13***77 | Spider As; (8-Blade) | 1 |
173-8046 Control Ar-Auxiliary
| 17***46 | Control Ar-Auxiliary | 1 |
| 19***36 | Seal | 2 |
| 19***37 | Seal | 2 |
173-8047 Control Ar-Auxiliary
| 17***47 | Control Ar-Auxiliary | 1 |
| 19***37 | Seal | 2 |
| 21***81 | Seal-O-Ring | 2 |
173-8048 Control Ar-Auxiliary
| 17***48 | Control Ar-Auxiliary | 1 |
| 21***25 | Hub | 1 |
| 21***26 | Cage-Spring | 4 |
146-1378 Control Ar-Auxiliary
| 14***78 | Control Ar-Auxiliary | 1 |
| 19***36 | Seal | 2 |
| 19***37 | Seal | 2 |
151-6654 Cooler & Mtg Gp-Hydraulic Oil
| 15***54 | Cooler & Mtg Group-Hydraulic Oil | 1 |
| 19***33 | Coupling Group-Flexible | 1 |
| 8T***35 | Capscrew, Hexhead; (1/2-13 X 2 Pltd.) | 8 |
210-8103 Cooler Gp-Hydraulic Oil
| 15***76 | Cylinder & Seal Group-Bucket | 1 |
| 16***83 | Lines Group-Bucket Cylinder | 1 |
| 21***03 | Cooler Group-Hydraulic Oil | 1 |
210-8157 Cooler Gp-Hydraulic Oil
| 15***70 | Cylinder & Seal Group-Hydraulic | 1 |
| 17***07 | Lines Group-Stick Cylinder | 1 |
| 21***57 | Cooler Group-Hydraulic Oil | 1 |
210-8002 Cooler Gp-Hydraulic Oil
| 15***73 | Cylinder & Seal Group-Bucket | 1 |
| 16***82 | Lines Group-Bucket Cylinder | 1 |
| 21***02 | Cooler Group-Hydraulic Oil | 1 |
196-8133 Coupling Gp-Flexible
| 11***50 | Seal - Lip Type | 4 |
| 15***68 | Cylinder Group-Boom | 1 |
| 19***33 | Coupling Group-Flexible | 1 |
151-6646 Coupling Gp-Pump
| 15***46 | Coupling Group-Pump | 1 |
| 15***74 | Cylinder Group-Bucket | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
155-9066 Cylinder & Lines Gp-Boom -Rh
| 15***66 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 15***71 | Cylinder Group-Hydraulic | 1 |
| 9X***00 | Seal; (Id=129.85mm) | 4 |
155-9065 Cylinder & Lines Gp-Boom -Lh
| 15***65 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 15***77 | Cylinder Group-Bucket | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
155-9075 Cylinder & Lines Gp-Bucket
| 09***31 | Seal-O-Ring | 1 |
| 10***86 | Ring-Retaining | 1 |
| 10***62 | Head | 1 |
155-9072 Cylinder & Lines Gp-Bucket
| 09***32 | Seal-O-Ring | 1 |
| 15***72 | Cylinder & Lines Group-Bucket | 1 |
| 15***87 | Rod As | 1 |
155-9069 Cylinder & Lines Gp-Stick
| 09***33 | Seal-O-Ring; (Id=209.30mm) | 1 |
| 10***61 | Head | 1 |
| 10***64 | Ring; (Retaining) | 1 |
155-9067 Cylinder & Seal Gp-Boom
| 09***54 | Seal; (Id=79.85mm) | 2 |
| 15***67 | Cylinder & Seal Group-Boom | 1 |
| 15***97 | Cylinder Group-Counterweight | 1 |
155-9073 Cylinder & Seal Gp-Bucket
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
| 11***60 | Bearing; (Sleeve) | 1 |
| 12***65 | Seal; (Id=104.00mm) | 1 |
155-9076 Cylinder & Seal Gp-Bucket
| 09***74 | Setscrew-Socket; (M6x1x16-mm) | 1 |
| 09***33 | Seal-O-Ring; (Id=209.30mm) | 1 |
| 10***64 | Ring; (Retaining) | 1 |
155-9070 Cylinder & Seal Gp-Hydraulic
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
| 15***70 | Cylinder & Seal Group-Hydraulic | 1 |
155-9068 Cylinder Gp-Boom
| 14***98 | Drive Group-Swing; -Without Motor, Front | 1 |
| 15***68 | Cylinder Group-Boom | 1 |
| 15***01 | Motor & Mtg Group-Swing | 1 |
155-9074 Cylinder Gp-Bucket
| 09***30 | Ring; (Retaining) | 1 |
| 09***50 | Coupling-Pipe | 1 |
| 09***28 | Washer; (53x84x1-mm Thk) | 8 |
155-9077 Cylinder Gp-Bucket
| 14***26 | Drive Group-Swing; -Without Motor, Rear | 1 |
| 15***77 | Cylinder Group-Bucket | 1 |
| 15***03 | Motor & Mtg Group-Swing | 1 |
155-9196 Cylinder Gp-Counterweight
| 09***30 | Ring; (Retaining) | 1 |
| 09***50 | Coupling-Pipe | 1 |
| 09***28 | Washer; (53x84x1-mm Thk) | 8 |
155-9197 Cylinder Gp-Counterweight
| 14***98 | Drive Group-Swing; -Without Motor, Front | 1 |
| 15***97 | Cylinder Group-Counterweight | 1 |
155-9071 Cylinder Gp-Hydraulic
| 14***26 | Drive Group-Swing; -Without Motor, Rear | 1 |
| 15***71 | Cylinder Group-Hydraulic | 1 |
6i-3638 Drive Gp-Pump
| 09***55 | Pin | 2 |
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 11***74 | Bolt; (L=20mm) | 1 |
199-4641 Drive Gp-Swing
| 09***59 | Screw-Machine; (M6x1x3.4-mm) | 2 |
| 11***53 | Housing Group-Filter | 2 |
| 11***54 | Cover | 2 |
148-4598 Drive Gp-Swing
| 14***98 | Drive Group-Swing; -Without Motor, Front | 1 |
| 4T***88 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
148-4597 Drive Gp-Swing
| 14***97 | Drive Group-Swing | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 15***43 | Connector As. | 2 |
148-4626 Drive Gp-Swing
| 09***10 | Seal-O-Ring; (Id=4.80mm) | 6 |
| 09***81 | Seal-O-Ring | 1 |
| 12***81 | Filter Element As-Oil; (Standard Efficiency)(Hydraulic, Return) | 1 |
199-4642 Drive Gp-Swing
| 09***81 | Seal-O-Ring | 1 |
| 12***81 | Filter Element As-Oil; (Standard Efficiency)(Hydraulic, Return) | 1 |
| 13***23 | Seal-O-Ring | 4 |
148-4625 Drive Gp-Swing
| 11***54 | Cover | 1 |
| 12***03 | Seal-O-Ring (Id=185mm) | 2 |
| 12***80 | Filter Group-Oil; -Hydraulic | 1 |
148-4627 Fastener Gp-Swing & Final Dr
| 14***27 | Fastener Group-Swing & Final Dr, Shim | 1 |
| 16***80 | Filter & Lines Group-Hydraulic | 1 |
168-9380 Filter & Lines Gp-Hydraulic
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 16***80 | Filter & Lines Group-Hydraulic | 1 |
| 18***37 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
191-5650 Filter Gp-Oil
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 11***69 | Lever | 1 |
| 11***70 | Support Assem. | 1 |
6e-5534 Filter Gp-Oil
| 09***81 | Seal-O-Ring | 1 |
| 13***23 | Seal-O-Ring | 4 |
| 13***24 | Screw; (M3x0.5x5-mm) | 8 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 15***45 | Pump & Mtg Group-Main Hydraulic | 1 |
| 15***47 | Pump & Mtg Group-Hydraulic | 1 |
| 16***68 | Lines Group-Motor | 1 |
107-6995 Filter Gp-Oil
| 09***18 | Washer; (14.2x24.5x3.5-mm Thk) | 2 |
| 09***16 | Seal-O-Ring | 1 |
| 09***45 | Plug, Tapered | 1 |
180-6914 Filter Gp-Oil
| 13***34 | Ring; (Stop) | 1 |
| 14***68 | Screw; (Machine) (M4x0.7x10mm) | 8 |
| 18***14 | Filter Group-Oil | 1 |
126-2080 Filter Gp-Oil
| 12***80 | Filter Group-Oil; -Hydraulic | 1 |
| 18***42 | Filter Group-Oil; -Hydraulic Return | 3 |
173-3511 Filter Gp-Oil
| 08***72 | Plug-O-Ring | 2 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 2 |
| 12***94 | Plug; (Break Off) | 8 |
185-0336 Filter Gp-Oil
| 15***45 | Pump & Mtg Group-Main Hydraulic | 1 |
| 15***47 | Pump & Mtg Group-Hydraulic | 1 |
| 16***68 | Lines Group-Motor | 1 |
206-3219 Filter Gp-Oil
| 14***60 | Clip | 26 |
| 14***61 | Plate | 4 |
| 17***57 | Tube As | 1 |
126-2112 Filter Gp-Oil -Hydraulic Return
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 12***12 | Filter Group-Oil; -Hydraulic Return | 1 |
| 23***57 | Pipe | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 14***60 | Clip | 24 |
| 14***61 | Plate | 4 |
| 14***63 | Clip; (Tab) | 2 |
191-5593 Head Gp-Pump
| 14***60 | Clip | 8 |
| 19***93 | Head Group-Pump | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
116-3653 Housing Gp-Filter
| 11***53 | Housing Group-Filter | 1 |
| 14***60 | Clip | 8 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
158-8128 Hydraulic Ar
| 14***60 | Clip | 22 |
| 14***61 | Plate | 4 |
| 15***28 | Hydraulic Ar | 1 |
171-0151 Hydraulic Ar
| 14***60 | Clip | 30 |
| 14***61 | Plate | 4 |
| 17***51 | Hydraulic Ar | 1 |
159-7744 Lever Gp-Control
| 14***60 | Clip | 28 |
| 14***61 | Plate | 4 |
| 14***63 | Clip; (Tab) | 2 |
197-2257 Lines Gp-Auxiliary Hydraulic
| 08***73 | Hose As (Nom 06, L=1050mm) | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 8 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
153-8591 Lines Gp-Auxiliary Hydraulic -General Boom
| 14***60 | Clip | 8 |
| 15***91 | Lines Group-Auxiliary Hydraulic; -General Boom | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
193-6554 Lines Gp-Auxiliary Hydraulic
| 14***60 | Clip | 8 |
| 19***54 | Lines Group-Auxiliary Hydraulic; -Stick, High Pressure | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
193-6556 Lines Gp-Auxiliary Hydraulic
| 09***94 | Clamp, Double | 3 |
| 15***74 | Clip As | 2 |
| 17***84 | Plate | 2 |
193-6555 Lines Gp-Auxiliary Hydraulic
| 09***94 | Clamp, Double | 2 |
| 15***74 | Clip As | 1 |
| 17***43 | Tube As | 1 |
193-6553 Lines Gp-Auxiliary Hydraulic -Boom
| 14***60 | Clip | 4 |
| 19***53 | Lines Group-Auxiliary Hydraulic; -Boom | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
179-5067 Lines Gp-Auxiliary Hydraulic
| 14***60 | Clip | 8 |
| 17***67 | Lines Group-Auxiliary Hydraulic; -Mass Boom | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 6 |
153-8819 Lines Gp-Auxiliary Hydraulic
| 14***60 | Clip | 8 |
| 15***19 | Lines Group-Auxiliary Hydraulic; -Stick, High Pressure | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
168-9661 Lines Gp-Boom
| 13***08 | Clip-Half | 2 |
| 13***09 | Grommet | 1 |
| 14***78 | Support As | 1 |
173-8029 Lines Gp-Boom
| 12***14 | Clip | 16 |
| 17***32 | Tube As | 1 |
| 17***33 | Tube As | 1 |
202-7022 Lines Gp-Boom
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
| 14***56 | Clip | 2 |
| 14***08 | Plug As. | 1 |
168-9764 Lines Gp-Boom
| 13***08 | Clip-Half | 4 |
| 13***09 | Grommet | 2 |
| 16***64 | Lines Group-Boom | 1 |
176-4370 Lines Gp-Boom
| 09***03 | Seal-O-Ring | 2 |
| 12***09 | Clip | 2 |
| 12***14 | Clip | 2 |
202-7029 Lines Gp-Boom
| 08***91 | Spacer; (15.5x30x12-mm Thk) | 1 |
| 10***57 | Hose As (Nom 15, L=1250mm) | 1 |
| 10***06 | Hose As | 1 |
176-4552 Lines Gp-Boom Cylinder
| 08***56 | 90 Degrees Elbow | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***32 | Hose As (Nom 06, L=900mm) | 1 |
168-9659 Lines Gp-Boom Cylinder -Lh
| 08***56 | 90 Degrees Elbow | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***32 | Hose As (Nom 06, L=900mm) | 2 |
168-9660 Lines Gp-Boom Cylinder -Rh
| 08***56 | 90 Degrees Elbow | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 1 |
| 08***32 | Hose As (Nom 06, L=900mm) | 1 |
168-9383 Lines Gp-Bucket Cylinder
| 13***62 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 1 |
168-9382 Lines Gp-Bucket Cylinder
| 12***29 | Cover | 1 |
| 14***18 | Connector As | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
176-4361 Lines Gp-Front
| 08***62 | Link | 1 |
| 08***87 | Valve Group-Check; -Pilot Operated | 1 |
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 3 |
168-9374 Lines Gp-Front
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 09***69 | Bolt | 4 |
| 11***18 | Hose As | 1 |
168-9378 Lines Gp-Front -Common
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 09***69 | Bolt | 4 |
| 11***18 | Hose As | 1 |
168-9368 Lines Gp-Motor
| 08***29 | Block | 1 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 12 |
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 8 |
168-9377 Lines Gp-Pilot
| 08***29 | Block | 1 |
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 12 |
176-4553 Lines Gp-Pilot
| 17***53 | Lines Group-Pilot | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 1P***06 | Seal; 57.9mm(2.28in.)I.D. | 1 |
176-4554 Lines Gp-Pilot
| 17***54 | Lines Group-Pilot | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 1P***06 | Seal; 57.9mm(2.28in.)I.D. | 1 |
168-9376 Lines Gp-Pump
| 16***76 | Lines Group-Pump | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 21***44 | Hose As | 2 |
168-9381 Lines Gp-Pump
| 16***81 | Lines Group-Pump; -Shutoff Valve | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 21***41 | Hose As | 2 |
168-9379 Lines Gp-Rear Attachment
| 13***08 | Clip-Half | 4 |
| 13***09 | Grommet | 2 |
| 16***79 | Lines Group-Rear Attachment | 1 |
168-9375 Lines Gp-Return & Filter
| 09***94 | Clamp, Double | 2 |
| 14***60 | Clip | 4 |
| 14***18 | Connector As | 1 |
176-4371 Lines Gp-Stick
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***39 | Connector As. | 1 |
| 14***39 | Tee As | 1 |
173-5001 Lines Gp-Stick
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***39 | Connector As. | 1 |
| 14***39 | Tee As | 1 |
207-6278 Lines Gp-Stick
| 03***05 | Seal-O-Ring | 3 |
| 11***85 | Retainer | 3 |
| 11***86 | Spring | 3 |
176-4374 Lines Gp-Stick
| 07***41 | Seal; (30.3mm Od) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***74 | Solenoid As-Proportional; (Pilot Control Actuator) | 3 |
176-4375 Lines Gp-Stick
| 03***05 | Seal-O-Ring | 3 |
| 11***85 | Retainer | 3 |
| 11***86 | Spring | 3 |
176-4372 Lines Gp-Stick
| 07***41 | Seal; (30.3mm Od) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***74 | Solenoid As-Proportional; (Pilot Control Actuator) | 3 |
173-5028 Lines Gp-Stick
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***39 | Connector As. | 1 |
| 14***39 | Tee As | 1 |
173-4907 Lines Gp-Stick Cylinder
| 09***87 | Seal-O-Ring | 1 |
| 15***02 | Motor Group-Swing | 1 |
| 17***07 | Lines Group-Stick Cylinder | 1 |
173-8028 Lines Gp-Stick Cylinder
| 09***87 | Seal-O-Ring | 1 |
| 15***04 | Motor Group-Swing | 1 |
| 17***28 | Lines Group-Stick Cylinder; -Lowering Control | 1 |
168-9373 Lines Gp-Swing Motor
| 16***73 | Lines Group-Swing Motor | 1 |
| 20***95 | Motor Group-Travel | 1 |
| 6D***92 | Seal-O-Ring (Id=367.89mm) | 1 |
187-7090 Lines Gp-Travel Motor
| 09***46 | Ring; (Retaining) | 1 |
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
168-9372 Lines Gp-Travel Motor
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 4 |
| 10***62 | Dowel | 2 |
| 12***85 | Seal-O-Ring | 1 |
176-4360 Lines Gp-Travel Motor
| 09***90 | Bolt-Socket Head; (M14x2x60-mm) | 4 |
| 10***62 | Dowel | 2 |
| 16***19 | Seal-Shaft | 1 |
154-3294 Manifold & Valve Gp
| 09***73 | Seal-O-Ring (Id=5.80mm) | 2 |
| 13***16 | Valve Group | 1 |
| 15***94 | Manifold & Valve Group | 1 |
194-0946 Manifold & Valve Gp
| 09***46 | Ring; (Retaining) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
154-3295 Manifold & Valve Gp
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 2 |
| 13***13 | Valve Group-Solenoid | 1 |
| 15***95 | Manifold & Valve Group | 1 |
194-0947 Manifold & Valve Gp
| 09***73 | Seal-O-Ring (Id=5.80mm) | 2 |
| 13***16 | Valve Group | 1 |
| 17***52 | Valve Group-Relief | 2 |
155-9201 Motor & Mtg Gp-Swing
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 2 |
| 13***13 | Valve Group-Solenoid | 1 |
| 15***01 | Motor & Mtg Group-Swing | 1 |
155-9203 Motor & Mtg Gp-Swing
| 09***30 | Ring-Retaining; (External) | 1 |
| 09***65 | Plug, Tapered | 2 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 2 |
155-9198 Motor & Mtg Gp-Travel
| 12***91 | Shim; (1-mm Thk) | 2 |
| 12***80 | Shim; (0.5-mm Thk) | 4 |
| 13***24 | Guide As | 2 |
209-6058 Motor Gp-Piston -Hydraulic Oil Cooler
| 15***06 | Pump Group-Piston | 1 |
| 15***22 | Pump Group-Gear; -Pilot | 1 |
| 17***18 | Pump Group-Piston; -Fan Motor | 1 |
200-3252 Motor Gp-Piston
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 20***52 | Motor Group-Piston; -Reversing Hydraulic Fan | 1 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 1 |
295-9421 Motor Gp-Piston
| 15***46 | Coupling Group-Pump | 1 |
| 15***05 | Pump Group-Main Hydraulic | 1 |
| 17***82 | Cover | 1 |
155-9202 Motor Gp-Swing
| 15***02 | Motor Group-Swing | 1 |
| 15***24 | Pump Group-Gear; -Pilot | 1 |
295-9446 Motor Gp-Swing
| 09***58 | Ring-Retaining | 2 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 4 |
| 11***30 | Screw; (1-5/16-Thd) | 2 |
177-2548 Motor Gp-Swing
| 10***96 | Seal-O-Ring | 2 |
| 17***48 | Motor Group-Swing | 1 |
| 20***69 | Pump Group-Main Hydraulic | 1 |
155-9204 Motor Gp-Swing
| 09***67 | Washer-Hard; (15x28x2.5-mm Thk) | 4 |
| 09***24 | Bolt; (M14x2x145-mm) | 4 |
| 15***04 | Motor Group-Swing | 1 |
295-9438 Motor Gp-Swing
| 09***23 | Plug | 2 |
| 09***65 | Plug, Tapered | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 2 |
209-5895 Motor Gp-Travel
| 03***28 | Seal-O-Ring | 1 |
| 11***22 | Seal-O-Ring | 1 |
| 15***25 | Bearing As-Roller | 1 |
197-2172 Mounting Gp-Counterweight Cyl
| 09***15 | Ring-Retaining | 1 |
| 15***54 | Barrel | 1 |
| 16***40 | Pin | 3 |
171-0113 Plug Gp-Control Valve
| 16***78 | Bearing-Spherical | 1 |
| 16***79 | Pin | 3 |
| 16***82 | Washer; (42-mm Odx2.7-mm Thk) | 1 |
151-6647 Pump & Mtg Gp-Hydraulic
| 15***47 | Pump & Mtg Group-Hydraulic | 1 |
| 15***12 | Piston Assem. | 9 |
| 15***15 | Plate | 1 |
151-6645 Pump & Mtg Gp-Main Hydraulic
| 15***45 | Pump & Mtg Group-Main Hydraulic | 1 |
| 16***59 | Retainer | 1 |
| 16***60 | Guide-Ball | 1 |
155-9224 Pump Gp-Gear
| 15***24 | Pump Group-Gear; -Pilot | 1 |
| 7Y***28 | Rotor (Casting) | 1 |
| 7Y***30 | Rotor Group-Swivel | 1 |
155-9222 Pump Gp-Gear
| 09***29 | Ring; (Retaining) | 1 |
| 10***66 | Seal-O-Ring | 1 |
| 14***73 | Roller | 4 |
155-9205 Pump Gp-Main Hydraulic
| 15***05 | Pump Group-Main Hydraulic | 1 |
| 4J***21 | Packing,Preformed Tube Assembly Flange | 5 |
| 4J***40 | Seal-O-Ring (Id=18.64mm) | 1 |
342-1793 Pump Gp-Main Hydraulic
| 09***33 | Seal-O-Ring (Id=139.60mm) | 3 |
| 09***28 | Seal-O-Ring | 1 |
| 15***19 | Seal | 5 |
200-3269 Pump Gp-Main Hydraulic
| 09***39 | Spring | 1 |
| 09***41 | Holder, Guide | 1 |
| 15***36 | Rod | 1 |
170-9918 Pump Gp-Piston
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 2 |
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
335-0029 Pump Gp-Piston
| 08***06 | Shim (2.0 mm Thick) | 6 |
| 08***07 | Shim (1.0 mm Thick) | 6 |
| 08***09 | Shim (0.4 mm Thick) | 6 |
155-9206 Pump Gp-Piston
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
185-0266 Rotating Gp-Motor
| 17***96 | Support As | 1 |
| 17***03 | Support As | 1 |
| 17***04 | Support As | 1 |
185-0275 Rotating Gp-Motor
| 11***68 | Bolt; (M16x2x280-mm) | 4 |
| 17***96 | Support As | 1 |
| 17***04 | Support As | 1 |
191-5590 Rotating Gp-Pump
| 17***83 | Wiring Group-Overload Warning | 1 |
| 17***43 | Valve Group-Main Control | 1 |
| 17***52 | Lines Group-Boom Cylinder | 1 |
155-9135 Rotating Gp-Pump
| 15***35 | Rotating Group-Pump; -Hydraulic Fan Pump | 1 |
| 17***28 | Lines Group-Stick Cylinder; -Lowering Control | 1 |
| 17***52 | Valve Group-Main Control | 1 |
170-9812 Rotating Gp-Pump
| 17***12 | Rotating Group-Pump | 1 |
| 17***28 | Lines Group-Stick Cylinder; -Lowering Control | 1 |
| 17***52 | Valve Group-Main Control | 1 |
7y-4827 Rotor Gp-Swivel
| 17***28 | Lines Group-Stick Cylinder; -Lowering Control | 1 |
| 17***29 | Lines Group-Boom; -Stick Lowering Control | 1 |
| 17***52 | Valve Group-Main Control | 1 |
7y-4830 Rotor Gp-Swivel
| 11***69 | Valve Group-Relief; -Low Signal Pressure | 1 |
| 11***70 | Valve Group-Relief; -High Signal Pressure | 1 |
| 11***65 | Filter; (Edge) | 1 |
155-9235 Screen Gp-Hydraulic
| 09***73 | Spring | 1 |
| 15***35 | Screen Group-Hydraulic; -Tank | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
156-0622 Swivel Gp
| 11***48 | Body | 1 |
| 11***49 | Valve Group-Check | 1 |
| 15***22 | Swivel Group | 1 |
168-9370 Tank & Filter Gp-Hydraulic
| 12***95 | Retainer | 2 |
| 16***70 | Tank & Filter Group-Hydraulic | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 1 |
168-9369 Tank & Mtg Gp-Hydraulic
| 11***62 | Spring | 1 |
| 11***64 | Plug; (7/8) | 1 |
| 11***65 | Valve | 1 |
168-9371 Valve & Mtg Gp-Main Control
| 15***62 | Flange | 1 |
| 15***63 | Cover | 1 |
| 16***71 | Valve & Mtg Group-Main Control | 1 |
206-3183 Valve Ar -Stick Lowering
| 15***61 | Cover | 1 |
| 15***63 | Cover | 1 |
| 18***73 | Setscrew; (Socket) | 1 |
206-3189 Valve Ar
| 09***99 | Seal-O-Ring | 1 |
| 09***16 | Seal-O-Ring | 2 |
| 09***93 | Ring-Backup | 1 |
171-0026 Valve Ar-Boom Lowering Control
| 00***03 | Seal-O-Ring | 2 |
| 14***88 | Cover | 1 |
| 14***92 | Retainer-Spring | 2 |
171-0027 Valve Ar-Stick Lowering Cont
| 00***64 | Plug | 1 |
| 10***11 | Piston | 3 |
| 10***40 | Plug-Orifice | 2 |
223-7751 Valve Gp
| 00***64 | Plug | 1 |
| 10***11 | Piston | 3 |
| 14***95 | Body-Valve | 1 |
147-4312 Valve Gp-Check
| 00***64 | Plug | 1 |
| 10***11 | Piston | 3 |
| 10***40 | Plug-Orifice | 2 |
127-8394 Valve Gp-Check
| 00***64 | Plug | 1 |
| 10***11 | Piston | 3 |
| 12***94 | Valve Group-Check; -Tank Port Makeup | 1 |
201-9382 Valve Gp-Check
| 09***99 | Seal-O-Ring | 1 |
| 09***04 | Seal-O-Ring (Id=39.70mm) | 1 |
| 09***10 | Seal-O-Ring | 1 |
6i-6849 Valve Gp-Check
| 00***64 | Plug | 1 |
| 10***11 | Piston | 3 |
| 14***95 | Body-Valve | 1 |
087-5087 Valve Gp-Check
| 00***64 | Plug | 1 |
| 08***87 | Valve Group-Check; -Pilot Operated | 1 |
| 10***11 | Piston | 3 |
114-0649 Valve Gp-Check
| 11***49 | Valve Group-Check | 1 |
| 12***94 | Valve Group-Check; -Tank Port Makeup | 1 |
| 14***44 | Plug As | 3 |
201-9381 Valve Gp-Check
| 14***81 | Block | 1 |
| 14***29 | Cover | 1 |
| 15***46 | Valve Group-Relief; -Line Relief, Stick Cylinder | 1 |
173-3429 Valve Gp-Check
| 09***93 | Rod | 1 |
| 09***94 | Rod | 2 |
| 09***28 | Seal-O-Ring | 1 |
171-0193 Valve Gp-Check & Relief
| 11***69 | Valve Group-Relief; -Low Signal Pressure | 1 |
| 11***70 | Valve Group-Relief; -High Signal Pressure | 1 |
| 11***65 | Filter; (Edge) | 1 |
144-7087 Valve Gp-Control
| 11***69 | Valve Group-Relief; -Low Signal Pressure | 1 |
| 11***70 | Valve Group-Relief; -High Signal Pressure | 1 |
| 11***65 | Filter; (Edge) | 1 |
174-1846 Valve Gp-Control
| 17***46 | Valve Group-Control | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 9S***04 | Plug-O-Ring; (Straight Thread O-Ring) | 2 |
174-1827 Valve Gp-Control
| 11***69 | Valve Group-Relief; -Low Signal Pressure | 1 |
| 11***70 | Valve Group-Relief; -High Signal Pressure | 1 |
| 11***65 | Filter; (Edge) | 1 |
223-7745 Valve Gp-Control
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 5 |
| 11***29 | Screw | 1 |
| 12***94 | Plug; (Break Off) | 8 |
223-7738 Valve Gp-Control
| 09***52 | Seat, Spring | 1 |
| 09***85 | Ring; (Back Up) | 2 |
| 09***87 | Ring, Back-Up; (Buck Up) | 2 |
174-1854 Valve Gp-Control -Rh
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***09 | Spring | 1 |
174-1858 Valve Gp-Control
| 17***58 | Valve Group-Control | 1 |
| 19***64 | Valve Group-Control | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
174-1829 Valve Gp-Control
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***92 | Seal-O-Ring (Id=23.70mm) | 1 |
| 10***68 | Plug-Pipe | 2 |
123-2515 Valve Gp-Counterweight Control
| 10***11 | Retainer | 1 |
| 11***17 | Seal-O-Ring | 1 |
| 12***15 | Valve Group-Counterweight Control | 1 |
145-7181 Valve Gp-Load Control
| 11***97 | Valve Group-Pump Control; -Pressure Compensator | 1 |
| 14***81 | Valve Group-Load Control; -Boom Lowering-Drift Reduction, Var Adj Boom | 1 |
| 20***30 | Valve Group-Pump Control; -Flow Compensator | 1 |
297-0488 Valve Gp-Load Control
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 03***43 | Seal-O-Ring | 1 |
| 13***89 | Plug | 1 |
171-0191 Valve Gp-Load Control
| 10***28 | Piston-Compensator | 1 |
| 10***29 | Case | 1 |
| 10***31 | Cover | 1 |
180-7882 Valve Gp-Main Control
| 15***50 | Spacer; (0.16-mm Thk) | 1 |
| 16***02 | Plug | 1 |
| 16***03 | Valve | 1 |
174-1852 Valve Gp-Main Control
| 11***54 | Valve | 1 |
| 11***37 | Screen As | 1 |
| 11***72 | Body As | 1 |
174-1843 Valve Gp-Main Control
| 11***54 | Valve | 1 |
| 11***37 | Screen As | 1 |
| 11***72 | Body As | 1 |
140-0736 Valve Gp-Manifold & Reducing
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 14***36 | Valve Group-Manifold & Reducing | 1 |
| 2P***75 | Seal-O-Ring | 1 |
229-5272 Valve Gp-Manual -Auxiliary, Shutoff
| 11***75 | Ring-Backup (24.92mm Id) | 2 |
| 22***72 | Valve Group-Manual; -Auxiliary, Shutoff | 1 |
| 2P***75 | Seal-O-Ring | 1 |
123-2514 Valve Gp-Pilot -Counterweight
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 12***14 | Valve Group-Pilot; -Counterweight | 1 |
| 2P***75 | Seal-O-Ring | 1 |
193-1665 Valve Gp-Pressure Reducing
| 14***58 | Block | 1 |
| 15***47 | Valve Group-Relief | 1 |
| 19***65 | Valve Group-Pressure Reducing; -Signal Duplication | 1 |
165-9251 Valve Gp-Pump Control
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***51 | Valve Group-Pump Control | 1 |
| 16***65 | Ring-Back Up; (Backup) | 1 |
209-5937 Valve Gp-Pump Control
| 1M***18 | Ball | 1 |
| 20***37 | Valve Group-Pump Control; -Pressure Compensator | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
204-2730 Valve Gp-Pump Control
| 1M***18 | Ball | 1 |
| 20***30 | Valve Group-Pump Control; -Flow Compensator | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
111-9997 Valve Gp-Pump Control
| 11***97 | Valve Group-Pump Control; -Pressure Compensator | 1 |
| 15***91 | Block | 1 |
| 15***47 | Valve Group-Relief | 1 |
200-3270 Valve Gp-Pump Control
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***25 | Lever | 1 |
165-9250 Valve Gp-Pump Control
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***50 | Valve Group-Pump Control | 1 |
| 16***65 | Ring-Back Up; (Backup) | 1 |
177-2549 Valve Gp-Relief
| 09***02 | Ring | 2 |
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 2 |
155-4846 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
144-7113 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
160-8734 Valve Gp-Relief
| 07***41 | Seal; (30.3mm Od) | 1 |
| 09***11 | Pin; (Spring) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
155-4847 Valve Gp-Relief
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 13***39 | Orifice | 1 |
| 15***47 | Valve Group-Relief | 1 |
117-5269 Valve Gp-Relief
| 11***37 | Valve | 1 |
| 11***69 | Valve Group-Relief; -Low Signal Pressure | 1 |
| 1M***18 | Ball | 1 |
165-9579 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***23 | Nut Assem.; (M6x1-Thd) | 1 |
177-2552 Valve Gp-Relief
| 09***80 | Bolt-Socket Head; (M12x1.75x105-mm) | 8 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***03 | Seal-O-Ring (Id=44.40mm) | 2 |
352-6869 Valve Gp-Relief -Pilot Operated
| 15***95 | Lighting Group-Flood | 1 |
| 15***65 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 15***66 | Cylinder & Lines Group-Boom; -Rh | 1 |
165-9614 Valve Gp-Relief
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 16***71 | Kit-Seal; (Solenoid Valve) | 1 |
117-5270 Valve Gp-Relief
| 10***14 | Bushing | 1 |
| 11***70 | Valve Group-Relief; -High Signal Pressure | 1 |
| 13***80 | Valve-Shuttle | 1 |
158-8171 Valve Gp-Shutoff
| 15***95 | Lighting Group-Flood | 1 |
| 15***65 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 15***66 | Cylinder & Lines Group-Boom; -Rh | 1 |
158-9105 Valve Gp-Shuttle
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 11***50 | Seal - Lip Type | 4 |
6e-4429 Valve Gp-Shuttle
| 15***65 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 15***66 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 15***69 | Cylinder & Lines Group-Stick | 1 |
4t-1860 Valve Gp-Shuttle
| 15***65 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 15***66 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 15***69 | Cylinder & Lines Group-Stick | 1 |
111-0336 Valve Gp-Shuttle
| 11***36 | Valve Group-Shuttle | 1 |
| 15***65 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 15***66 | Cylinder & Lines Group-Boom; -Rh | 1 |
171-0028 Valve Gp-Solenoid
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***77 | Shim; (1-mm Thk) | 2 |
| 09***08 | Shim; (2-mm Thk) | 1 |
111-9916 Valve Gp-Solenoid
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
154-6591 Valve Gp-Solenoid
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 11***50 | Seal - Lip Type | 4 |
137-3713 Valve Gp-Solenoid
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***77 | Shim; (1-mm Thk) | 2 |
| 09***08 | Shim; (2-mm Thk) | 1 |
121-1491 Valve Gp-Solenoid
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 11***50 | Seal - Lip Type | 4 |
171-3685 Valve Gp-Solenoid
| 10***09 | Connector As | 6 |
| 14***78 | Plate | 3 |
| 15***49 | Hose As | 1 |
116-3420 Valve Gp-Swing Cushion
| 10***09 | Connector As | 6 |
| 11***20 | Valve Group-Swing Cushion; -Anti-Reaction, Fine Swing | 1 |
| 13***55 | Hose As | 1 |
155-9200 Valve Gp-Travel Counterbalance
| 10***09 | Connector As | 4 |
| 10***17 | Elbow As | 2 |
| 13***55 | Hose As | 1 |
Implements
150-2804 Boom Ar
| 08***38 | Plate As | 2 |
| 10***02 | Tube As | 1 |
| 10***03 | Tube As | 1 |
180-6901 Boom Ar
| 08***38 | Plate As | 2 |
| 10***78 | Tube As | 1 |
| 10***79 | Tube As | 1 |
150-2805 Boom Ar-Mass
| 08***38 | Plate As | 2 |
| 10***02 | Tube As | 1 |
| 10***03 | Tube As | 1 |
180-6902 Boom Ar-Mass Excavator
| 08***38 | Plate As | 2 |
| 10***09 | Connector As | 1 |
| 10***17 | Elbow As | 2 |
150-2803 Boom Ar-Reach
| 08***38 | Plate As | 2 |
| 10***09 | Connector As | 2 |
| 10***17 | Elbow As | 1 |
167-9834 Boom Gp
| 15***75 | Cylinder & Lines Group-Bucket | 1 |
| 16***34 | Boom Group | 1 |
| 16***38 | Linkage Group-Bucket; -Jb-Family | 1 |
195-5456 Boom Gp
| 15***75 | Cylinder & Lines Group-Bucket | 1 |
| 19***56 | Boom Group | 1 |
| 21***59 | Linkage Group-Bucket; -Jb-Family | 1 |
195-5459 Boom Gp
| 10***54 | Seal-O-Ring; (230.0mm Id) | 2 |
| 17***61 | Link & Bearing As | 1 |
| 17***65 | Link As | 1 |
167-9833 Boom Gp
| 08***38 | Plate As | 2 |
| 10***09 | Connector As | 1 |
| 10***17 | Elbow As | 2 |
167-9832 Boom Gp
| 08***38 | Plate As | 2 |
| 10***09 | Connector As | 2 |
| 10***17 | Elbow As | 1 |
176-2221 Lines Gp-Grease
| 17***17 | Stick Group-Hoe; -Mass | 1 |
| 17***21 | Lines Group-Grease; -Stick | 2 |
| 17***75 | Lines Group-Stick | 1 |
176-2219 Lines Gp-Grease
| 17***01 | Lines Group-Stick | 1 |
| 17***38 | Lines Group-Grease; -Stick | 1 |
| 17***19 | Lines Group-Grease; -Stick | 1 |
172-2959 Lines Gp-Grease
| 17***59 | Lines Group-Grease; -Mass Boom | 1 |
| 20***46 | Stick Group-Hoe | 1 |
| 20***50 | Cover, Lines Group-Grease; -Stick | 1 |
176-2220 Lines Gp-Grease
| 17***28 | Lines Group-Stick | 1 |
| 17***20 | Lines Group-Grease; -Stick | 2 |
| 19***65 | Stick Group-Hoe; -Mass | 1 |
174-8538 Lines Gp-Grease
| 17***38 | Lines Group-Grease; -Stick | 1 |
| 17***13 | Stick Group-Hoe; -Reach | 1 |
| 17***18 | Lines Group-Grease; -Stick | 1 |
176-2218 Lines Gp-Grease
| 17***14 | Stick Group-Hoe; -Reach | 1 |
| 17***18 | Lines Group-Grease; -Stick | 1 |
| 17***19 | Lines Group-Grease; -Stick | 1 |
172-2958 Lines Gp-Grease
| 10***54 | Seal-O-Ring; (230.0mm Id) | 4 |
| 17***58 | Lines Group-Grease; -Boom | 1 |
| 17***75 | Link As | 1 |
172-2957 Lines Gp-Grease
| 10***54 | Seal-O-Ring; (230.0mm Id) | 4 |
| 17***57 | Lines Group-Grease; -Boom | 1 |
| 17***71 | Link & Bearing As | 1 |
201-2958 Lines Gp-Grease
| 16***35 | Stick Group-Hoe | 1 |
| 17***01 | Lines Group-Stick | 1 |
| 17***38 | Lines Group-Grease; -Stick | 1 |
203-7450 Lines Gp-Grease
| 16***36 | Stick Group-Hoe | 1 |
| 17***28 | Lines Group-Stick | 1 |
| 17***20 | Lines Group-Grease; -Stick | 1 |
220-2424 Linkage Ar-Bucket -Without Hook, Jb Family
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
157-9986 Linkage Ar-Bucket
| 15***86 | Linkage Ar-Bucket | 1 |
| 17***16 | Stick Group-Hoe | 1 |
| 17***74 | Lines Group-Stick | 1 |
157-9987 Linkage Ar-Bucket
| 15***87 | Linkage Ar-Bucket | 1 |
| 20***50 | Cover, Lines Group-Grease; -Stick | 1 |
| 20***78 | Lines Group-Stick | 1 |
167-9837 Linkage Gp-Bucket -Hb-Family
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 15***53 | Shim; (0.5-mm Thk) | 2 |
219-8359 Linkage Gp-Bucket
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
167-9838 Linkage Gp-Bucket
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
202-2930 Stick Ar
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
180-6903 Stick Ar-Hoe
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 15***53 | Shim; (0.5-mm Thk) | 2 |
150-2811 Stick Ar-Hoe
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
150-2812 Stick Ar-Hoe
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 15***12 | Stick Ar-Hoe; -Mass | 1 |
180-6909 Stick Ar-Hoe
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 15***53 | Shim; (0.5-mm Thk) | 2 |
228-8129 Stick Ar-Hoe
| 15***31 | Flange | 1 |
| 15***60 | Plate | 1 |
| 22***29 | Stick Ar-Hoe | 1 |
180-6904 Stick Ar-Hoe
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 15***53 | Shim; (0.5-mm Thk) | 2 |
150-2810 Stick Ar-Hoe
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 15***10 | Stick Ar-Hoe | 1 |
150-2807 Stick Ar-Hoe
| 09***76 | Shim; (1-mm Thk) | 4 |
| 09***08 | Shim; (2-mm Thk) | 2 |
| 15***07 | Stick Ar-Hoe; -Reach | 1 |
150-2806 Stick Ar-Hoe
| 09***74 | Shim (T=1.0mm); (1-mm Thk) | 2 |
| 09***76 | Shim; (1-mm Thk) | 2 |
| 09***06 | Shim (T=2.0mm); (2-mm Thk) | 1 |
176-2213 Stick Gp-Hoe
| 17***13 | Stick Group-Hoe; -Reach | 1 |
| 20***08 | Bucket As-Excavation | 1 |
| 7Y***77 | Adjuster Group-Bucket; -Ub/Wb/Hb/Jb-Family | 1 |
176-2216 Stick Gp-Hoe
| 17***16 | Stick Group-Hoe | 1 |
| 20***17 | Bucket As-Excavation | 1 |
| 7Y***77 | Adjuster Group-Bucket; -Ub/Wb/Hb/Jb-Family | 1 |
228-5475 Stick Gp-Hoe
| 20***14 | Bucket As-Excavation | 1 |
| 22***75 | Stick Group-Hoe | 1 |
| 7Y***77 | Adjuster Group-Bucket; -Ub/Wb/Hb/Jb-Family | 1 |
167-9836 Stick Gp-Hoe
| 16***36 | Stick Group-Hoe | 1 |
| 18***87 | Bucket As; -Hb-Family | 1 |
| 7Y***77 | Adjuster Group-Bucket; -Ub/Wb/Hb/Jb-Family | 1 |
176-2214 Stick Gp-Hoe
| 17***14 | Stick Group-Hoe; -Reach | 1 |
| 20***10 | Bucket As-Excavation | 1 |
| 7Y***77 | Adjuster Group-Bucket; -Ub/Wb/Hb/Jb-Family | 1 |
203-7446 Stick Gp-Hoe
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 3 |
| 11***05 | Adapter-Tip; (J-600, 2-Strap, Rh) | 1 |
| 11***06 | Adapter-Tip; (J-600, 2-Strap, Lh) | 1 |
195-5465 Stick Gp-Hoe
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 6 |
| 19***65 | Stick Group-Hoe; -Mass | 1 |
| 20***11 | Plate-Wear | 2 |
167-9835 Stick Gp-Hoe
| 15***60 | Plate | 1 |
| 16***35 | Stick Group-Hoe | 1 |
| 28***40 | Flange | 1 |
195-5462 Stick Gp-Hoe
| 19***38 | Bucket As-Excavation | 1 |
| 19***62 | Stick Group-Hoe | 1 |
| 7Y***77 | Adjuster Group-Bucket; -Ub/Wb/Hb/Jb-Family | 1 |
176-2217 Stick Gp-Hoe
| 17***17 | Stick Group-Hoe; -Mass | 1 |
| 19***20 | Bucket As-Excavation | 1 |
| 7Y***77 | Adjuster Group-Bucket; -Ub/Wb/Hb/Jb-Family | 1 |
Lubrication System
200-0654 Base Gp-Oil Filter
| 18***76 | Hose-Fumes | 1 |
| 20***54 | Base Group-Oil Filter | 1 |
| 5P***69 | Clip | 1 |
200-0655 Base Gp-Oil Filter -Engine
| 20***55 | Base Group-Oil Filter; -Engine | 1 |
176-1363 Base Gp-Oil Filter -Engine
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 2 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 17***63 | Base Group-Oil Filter; -Engine | 1 |
4n-2481 Fastener Gp-Oil Pump Mounting
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
| 16***70 | Plug | 3 |
| 19***70 | Tube As-Guide | 1 |
178-3326 Filler Gp-Engine Oil
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
| 16***70 | Plug | 3 |
| 17***26 | Filler Group-Engine Oil | 1 |
200-0653 Filter Gp-Engine Oil
| 03***55 | Tee-Flared | 1 |
| 03***94 | Connector-Flared | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
187-3477 Fumes Disposal Gp
| 00***73 | Connector-Hose | 1 |
| 09***90 | Clamp; (Hose) (26-39mm Id) | 1 |
| 18***77 | Fumes Disposal Group | 1 |
190-2471 Gauge Gp-Oil Level (Dipstick)
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 10***44 | Elbow | 1 |
190-2472 Guide Gp-Oil Level Gauge
| 03***64 | Hose As | 1 |
| 19***72 | Guide Group-Oil Level Gauge | 1 |
| 1P***19 | Coupler (Use With .75 In Hose) | 1 |
160-6894 Lines Gp-Engine Oil
| 16***94 | Lines Group-Engine Oil | 1 |
| 16***79 | Shaft As-Pump | 1 |
| 16***82 | Shaft As-Pump | 1 |
151-6662 Lines Gp-Engine Oil Drain
| 14***03 | Shaft As-Idler | 1 |
| 15***62 | Lines Group-Engine Oil Drain | 1 |
| 1M***44 | Bolt; (3/8-16x2-1/4 In) | 2 |
187-6659 Lines Gp-Turbocharger Oil
| 18***59 | Lines Group-Turbocharger Oil | 1 |
| 19***82 | Radiator Group | 1 |
| 20***29 | Cooler Group-Fuel | 1 |
170-3562 Mounting Gp-Oil Level Gauge
| 13***82 | Bolt; (M16x2x100-mm) | 2 |
| 13***33 | Adapter-Fan | 1 |
| 13***53 | Lockwasher | 1 |
201-3825 Oil Change Gp-High Speed
| 01***24 | Bushing To Supply Port | 1 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 5 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 3 |
198-1508 Pump Gp-Engine Oil
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 17***64 | Spacer; (11x19x11.5-mm Thk) | 1 |
Machine Arrangement
180-6793 Chassis Ar
| 13***76 | Mirror Group-Rear View; -Rh | 1 |
| 14***22 | Horn Group-Electric | 1 |
| 15***33 | Lighting Group-Chassis; -Front | 1 |
158-0002 Chassis Ar
| 13***76 | Mirror Group-Rear View; -Rh | 1 |
| 14***22 | Horn Group-Electric | 1 |
| 15***33 | Lighting Group-Chassis; -Front | 1 |
158-0001 General Ar
| 14***28 | Power Train Ar, Pin | 1 |
| 15***48 | Engine Ar | 1 |
| 15***50 | Installation Ar-Engine | 1 |
180-6792 General Ar
| 14***28 | Power Train Ar, Pin | 1 |
| 15***02 | Frame Ar-Undercarriage | 1 |
| 15***48 | Engine Ar | 1 |
Operator Station
189-2783 Air Conditioner & Mounting Gp
| 11***77 | Cover Group-Storage | 1 |
| 11***82 | Strap | 1 |
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
189-2757 Air Conditioner & Mounting Gp
| 08***37 | Nozzle As | 2 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 09***21 | Lamp-Cab Interior; (Cab) | 1 |
168-0808 Air Conditioner Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***11 | Sleeve | 2 |
| 16***12 | Sleeve | 2 |
159-7855 Air Conditioner Gp
| 11***77 | Cover Group-Storage | 1 |
| 11***82 | Strap | 1 |
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
156-6550 Air Conditioner Gp
| 11***77 | Cover Group-Storage | 1 |
| 12***64 | Plate | 2 |
| 13***46 | Cover Assem. | 1 |
167-7087 Arm Gp-Lever
| 13***53 | Condenser Assem. | 1 |
| 16***87 | Arm Group-Lever | 1 |
| 17***34 | Support As | 1 |
147-4833 Blower Gp-Cab
| 11***13 | Support | 1 |
| 11***16 | Cover | 1 |
| 11***57 | Support Assem. | 1 |
6i-5444 Box Gp-Storage
| 11***16 | Cover | 1 |
| 11***57 | Support Assem. | 1 |
| 11***67 | Cover | 1 |
144-9643 Cab Gp
| 08***70 | Sleeve | 2 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
144-9641 Cab Gp
| 14***41 | Cab Group | 1 |
| 19***32 | Control Group-Joystick; -Rh | 1 |
| 19***33 | Control Group-Joystick; -Lh | 1 |
144-9639 Cab Gp
| 11***79 | Console Group-Operator; -Lh | 1 |
| 11***80 | Console Group-Operator; -Rh | 1 |
| 11***24 | Film-Instruction | 1 |
144-9642 Cab Gp
| 14***42 | Cab Group | 1 |
| 15***61 | Control Group-Handle | 1 |
| 15***62 | Control Group-Handle | 1 |
207-0135 Cab Gp
| 08***70 | Sleeve | 2 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
144-9633 Cab Gp
| 11***12 | Support | 1 |
| 11***14 | Panel | 1 |
| 11***56 | Support Assem. | 1 |
207-0136 Cab Gp
| 09***31 | Nut; (M12x1.75-Thd) | 2 |
| 09***32 | Knob; (Lh Travel Lever) | 1 |
| 09***33 | Knob; (Rh Travel Lever) | 1 |
207-0137 Cab Gp
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***56 | Step Assem. | 2 |
151-6664 Compressor Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***64 | Compressor Group-Refrigerant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
156-6552 Condenser & Mtg Gp-Refrigerant
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***73 | Pin | 1 |
111-6280 Console Gp-Operator
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***80 | Console Group-Operator; -Rh | 1 |
| 13***16 | Boot | 1 |
111-6279 Console Gp-Operator
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***79 | Console Group-Operator; -Lh | 1 |
164-0536 Console Gp-Operator
| 13***41 | Boot | 1 |
| 13***00 | Control Group-Handle; -Rh Joystick | 1 |
| 14***05 | Sensor Group-Position | 1 |
195-8931 Control & Mtg Gp-Joystick
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***32 | Pin | 1 |
| 18***07 | Lever | 1 |
139-4004 Control & Mtg Gp-Joystick
| 13***41 | Boot | 1 |
| 13***99 | Control Group-Handle; -Lh Joystick | 1 |
| 13***04 | Control & Mtg Group-Joystick | 1 |
139-4005 Control & Mtg Gp-Pedal
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***32 | Pin | 1 |
| 13***05 | Control & Mtg Group-Pedal | 1 |
133-7900 Control Gp-Handle
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***00 | Control Group-Handle; -Rh Joystick | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
155-7161 Control Gp-Handle
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***61 | Control Group-Handle | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
133-7899 Control Gp-Handle
| 13***41 | Boot | 1 |
| 13***99 | Control Group-Handle; -Lh Joystick | 1 |
| 14***05 | Sensor Group-Position | 1 |
155-7162 Control Gp-Handle
| 09***92 | Locknut; (M6x1-Thd) | 1 |
| 10***89 | Nut Assem.; (M6x1) | 3 |
| 12***97 | Cap | 1 |
111-6308 Control Gp-Handle
| 11***08 | Control Group-Handle | 1 |
| 13***41 | Boot | 1 |
| 14***05 | Sensor Group-Position | 1 |
211-5502 Control Gp-Hydraulic Pedal
| 10***33 | Insulator | 2 |
| 10***34 | Insulator | 1 |
| 12***17 | Duct | 1 |
153-8709 Control Gp-Hydraulic Pedal
| 11***89 | Rubber; (Cushion) | 1 |
| 14***78 | Duct-Heater | 1 |
| 15***09 | Control Group-Hydraulic Pedal | 1 |
147-4789 Control Gp-Hydraulic Pedal
| 08***44 | Latch Group-Front Window | 2 |
| 08***47 | Retainer | 1 |
| 08***48 | Screw-Tapping | 2 |
153-8708 Control Gp-Hydraulic Pedal
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 1 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 1 |
| 10***99 | Screw As; (M6x1x16-mm) | 4 |
145-3059 Control Gp-Hydraulic Pedal
| 08***44 | Latch Group-Front Window | 2 |
| 08***47 | Retainer | 1 |
| 08***48 | Screw-Tapping | 2 |
145-3055 Control Gp-Joystick -Lh
| 14***68 | Guard Group-Overhead | 1 |
| 14***44 | Lighting Group-Flood | 1 |
| 14***55 | Control Group-Joystick; -Lh | 1 |
187-9905 Control Gp-Joystick -Lh
| 14***59 | Guard Group-Vandalism | 1 |
| 16***22 | Box & Mtg Group-Storage | 1 |
| 18***05 | Control Group-Joystick | 1 |
195-8933 Control Gp-Joystick -Lh
| 16***22 | Box & Mtg Group-Storage | 1 |
| 19***33 | Control Group-Joystick; -Lh | 1 |
| 20***66 | Guard Group-Vandalism | 1 |
195-8932 Control Gp-Joystick -Rh
| 16***22 | Box & Mtg Group-Storage | 1 |
| 19***32 | Control Group-Joystick; -Rh | 1 |
| 20***18 | Guard Group-Vandalism | 1 |
187-9906 Control Gp-Joystick -Rh
| 14***58 | Guard Group | 1 |
| 16***22 | Box & Mtg Group-Storage | 1 |
| 18***06 | Control Group-Joystick | 1 |
145-3054 Control Gp-Joystick -Rh
| 13***80 | Duct-Defrost | 1 |
| 14***77 | Duct-Defrost | 1 |
| 14***17 | Duct As-Defrost | 1 |
319-4268 Control Gp-Pedal
| 16***22 | Box & Mtg Group-Storage | 1 |
| 20***64 | Guard Group-Vandalism | 1 |
| 31***68 | Control Group-Pedal | 1 |
169-0489 Control Gp-Unprgmed Monitor
| 11***17 | Plate-Warning; (Structure Modification)(Structure Certification) | 1 |
| 14***69 | Guard As | 1 |
| 14***31 | Bracket As | 1 |
111-6277 Cover Gp-Storage
| 11***77 | Cover Group-Storage | 1 |
| 14***22 | Guard As | 1 |
| 14***25 | Guard As | 1 |
148-1574 Door Gp-Cab
| 14***25 | Guard As | 1 |
| 14***28 | Sheet | 1 |
| 14***29 | Sheet | 1 |
151-9529 Door Gp-Cab
| 14***22 | Guard As | 1 |
| 14***25 | Guard As | 1 |
| 14***28 | Sheet | 1 |
144-9673 Duct Gp-Air
| 14***73 | Duct Group-Air | 1 |
| 14***25 | Guard As | 1 |
| 14***28 | Sheet | 1 |
144-9700 Duct Gp-Cab Air
| 14***00 | Duct Group-Cab Air | 1 |
| 15***84 | Bracket As | 1 |
| 21***10 | Horn As; (24-Volt, Low Tone) | 2 |
144-9672 Duct Gp-Cab Air
| 14***72 | Duct Group-Cab Air | 1 |
| 14***22 | Guard As | 1 |
| 14***25 | Guard As | 1 |
144-9671 Duct Gp-Defroster
| 10***46 | Guard; (9.5-cm Each) | 0 |
| 10***35 | Rod As-Antenna | 1 |
| 10***36 | Antenna Assem. | 1 |
172-4892 Guard Ar-Overhead
| 10***46 | Guard; (9.5-cm Each) | 0 |
| 10***35 | Rod As-Antenna | 1 |
| 10***36 | Antenna Assem. | 1 |
176-0418 Guard Ar-Vandalism
| 09***64 | Grommet | 1 |
| 12***98 | Bracket Assem. | 1 |
| 14***95 | Guard; (266-cm) | 2 |
202-2975 Guard Ar-Vandalism
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 20***75 | Guard Ar-Vandalism | 1 |
202-2974 Guard Ar-Vandalism
| 17***27 | Support As | 1 |
| 19***96 | Bracket As | 1 |
| 20***74 | Guard Ar-Vandalism | 1 |
157-9988 Guard Ar-Vandalism
| 09***64 | Grommet | 1 |
| 12***98 | Bracket Assem. | 1 |
| 12***05 | Joint | 2 |
202-2931 Guard Ar-Vandalism
| 09***45 | Cable; (Lanyard) | 1 |
| 20***31 | Guard Ar-Vandalism | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
144-9658 Guard Gp-Vandalism
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***66 | Bezel | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
144-9668 Guard Gp-Overhead
| 14***68 | Guard Group-Overhead | 1 |
| 14***49 | Module Group-Message Center | 1 |
| 18***38 | Software Group-Monitor; (Message Center) | 1 |
207-0266 Guard Gp-Vandalism
| 11***07 | Grommet | 1 |
| 12***59 | Grommet | 1 |
| 12***26 | Mount Assem. | 6 |
207-0264 Guard Gp-Vandalism
| 12***50 | Film-Instruction; (Travel Controls) | 1 |
| 14***89 | Control Group-Hydraulic Pedal | 1 |
| 20***64 | Guard Group-Vandalism | 1 |
207-0218 Guard Gp-Vandalism
| 11***81 | Support Group-Seat | 1 |
| 11***82 | Seat Group | 1 |
| 11***08 | Control Group-Handle | 1 |
144-9659 Guard Gp-Vandalism
| 11***81 | Support Group-Seat | 1 |
| 11***82 | Seat Group | 1 |
| 11***08 | Control Group-Handle | 1 |
145-0522 Horn Gp-Electric
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 17 |
145-0531 Installation Gp-Radio
| 11***07 | Grommet | 1 |
| 12***59 | Grommet | 1 |
| 12***26 | Mount Assem. | 6 |
185-8166 Lines Gp-Air Conditioner
| 18***66 | Lines Group-Air Conditioner | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
156-6551 Lines Gp-Air Conditioner
| 15***51 | Lines Group-Air Conditioner | 1 |
| 18***21 | Cover As | 2 |
| 18***26 | Riser As | 1 |
7y-0059 Literature Gp
| 11***83 | Seat Group | 1 |
| 12***25 | Seat Belt Group; -Retractable, 3-In | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
138-5276 Mirror Gp-Rear View -Rh
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 11***91 | Suspension Group-Seat | 1 |
| 13***76 | Mirror Group-Rear View; -Rh | 1 |
177-7710 Module Gp-Message Center
| 16***89 | Control Group-Unprgmed Monitor; -Vims | 1 |
| 17***10 | Module Group-Message Center | 1 |
| 22***70 | Software Group-Monitor; (Vids) | 1 |
148-2949 Module Gp-Message Center
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
139-4003 Monitor & Mtg Gp-Operator
| 13***03 | Monitor & Mtg Group-Operator | 1 |
| 16***89 | Control Group-Unprgmed Monitor; -Vims | 1 |
| 22***76 | Software Group-Monitor | 1 |
201-4544 Operator Ar
| 13***14 | Support As; (Seat) | 1 |
| 20***44 | Operator Ar | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
189-2761 Operator Ar
| 16***89 | Control Group-Unprgmed Monitor; -Vims | 1 |
| 18***61 | Operator Ar | 1 |
| 26***76 | Software Group-Monitor | 1 |
144-9676 Pedal Ar-Third
| 11***66 | Kit-Stop; (Seat) | 1 |
| 12***04 | Plate | 2 |
| 13***21 | Kit-Damper; (Seat) | 1 |
144-9660 Platform Gp-Operator
| 14***60 | Platform Group-Operator | 1 |
| 15***54 | Visor | 1 |
| 4I***37 | Bracket As | 1 |
170-2976 Platform Gp-Operator
| 15***28 | Visor | 1 |
| 15***31 | Bracket As | 1 |
| 17***76 | Platform Group-Operator | 1 |
207-0138 Platform Gp-Operator
| 11***20 | Cap | 1 |
| 20***38 | Platform Group-Operator | 1 |
| 5C***40 | Reservoir | 1 |
187-9780 Riser Ar-Cab
| 11***19 | Washer Group-Window | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 18***80 | Riser Ar-Cab | 1 |
187-9822 Riser Gp-Cab
| 11***19 | Washer Group-Window | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 18***22 | Riser Group-Cab | 1 |
122-9625 Seat Belt Gp -Retractable, 3-In
| 12***25 | Seat Belt Group; -Retractable, 3-In | 1 |
| 15***28 | Glass-Front | 1 |
| 15***29 | Strip | 2 |
111-6282 Seat Gp
| 10***88 | Knob | 1 |
| 11***82 | Seat Group | 1 |
| 11***06 | Switch; (Window Lower Limit) | 1 |
111-6283 Seat Gp
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 17 |
| 11***83 | Seat Group | 1 |
| 12***68 | Holder | 4 |
151-9617 Seat Gp-Suspension
| 10***88 | Knob | 1 |
| 11***06 | Switch; (Window Lower Limit) | 1 |
| 12***18 | Shim (T=1.0mm); (T=1.00mm) | 1 |
260-2077 Service Gp-Monitor
| 12***02 | Arm As-Wiper | 1 |
| 12***20 | Arm Assem. | 1 |
| 12***21 | Blade As-Wiper; (550-mm) | 1 |
221-8777 Service Gp-Monitor
| 11***90 | Arm As-Window Wiper | 1 |
| 15***00 | Blade As-Wiper; (500-mm) | 1 |
| 20***84 | Motor Group-Window Wiper | 1 |
221-8771 Service Gp-Monitor
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 17 |
| 12***68 | Holder | 4 |
| 15***60 | Frame As-Window | 1 |
111-6281 Support Gp-Seat
| 11***81 | Support Group-Seat | 1 |
| 11***90 | Arm As-Window Wiper | 1 |
| 11***91 | Arm As-Window Wiper | 1 |
111-6391 Suspension Gp-Seat
| 11***91 | Suspension Group-Seat | 1 |
| 12***51 | Film-Instruction; (Operator Control Pedals)(Operator Controls) | 1 |
| 7I***65 | Film-Notice; (Hammer, Read Omm)(English) | 1 |
144-9654 Visor Gp-Cab
| 12***52 | Film-Instruction; (Operator Control Pedals) | 1 |
| 14***54 | Visor Group-Cab | 1 |
| 7I***65 | Film-Notice; (Hammer, Read Omm)(English) | 1 |
144-9651 Visor Gp-Protection
| 10***77 | Film (Stripe) | 2 |
| 14***51 | Visor Group-Protection | 1 |
| 15***85 | Film-Warning; (Counterweight Removal System) | 1 |
111-6419 Washer Gp-Window
| 11***19 | Washer Group-Window | 1 |
| 11***54 | Film-Notice; (Hydraulic Hammer Operation) | 1 |
| 12***51 | Film-Instruction; (Operator Control Pedals)(Operator Controls) | 1 |
185-8165 Washer Gp-Window
| 18***65 | Washer Group-Window | 1 |
| 20***99 | Film; (Rh) | 1 |
| 20***00 | Film; (Lh), Cover | 1 |
156-6553 Washer Gp-Window
| 11***54 | Film-Notice; (Hydraulic Hammer Operation) | 1 |
| 12***51 | Film-Instruction; (Operator Control Pedals)(Operator Controls) | 1 |
| 15***53 | Washer Group-Window | 1 |
148-1573 Window Gp-Front
| 14***73 | Window Group-Front | 1 |
| 20***95 | Film; (Rh) | 1 |
| 20***96 | Film; (Lh) | 1 |
151-9559 Window Gp-Front
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***45 | Film; (Instruction) (Track Gauge) | 2 |
| 11***23 | Film; (Speed Control) | 1 |
151-9592 Window Gp-Front
| 12***39 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***92 | Window Group-Front | 1 |
| 17***59 | Film-Warning; (Engine Speed Control) | 1 |
151-9591 Window Gp-Front
| 15***91 | Window Group-Front | 1 |
| 16***30 | Film-Identification; (Biodegradable Hydraulic Oil) | 1 |
151-9558 Window Gp-Front
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 11***45 | Film; (Instruction) (Track Gauge) | 2 |
| 11***23 | Film; (Speed Control) | 1 |
144-9634 Wiper Gp-Window
| 11***61 | Film - Air Cleaner (Later Machines Only) | 1 |
| 12***40 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***34 | Wiper Group-Window | 1 |
151-9413 Wiper Gp-Window
| 12***42 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***13 | Wiper Group-Window | 1 |
| 17***60 | Film-Warning; (Engine Speed Control) | 1 |
Power Train
199-4661 Drive Gp-Final
| 09***64 | Grommet | 1 |
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
199-4651 Drive Gp-Final
| 13***73 | Bolt As; (M12x1.75x25-mm) | 4 |
| 17***15 | Sheet As-Sound Suppression | 1 |
| 17***19 | Cover As | 1 |
199-4691 Final Drive Gp
| 09***43 | Pin-Cotter | 2 |
| 09***14 | Pin, Clevis | 2 |
| 14***93 | Plate | 2 |
199-4653 Final Drive Gp
| 15***97 | Sheet | 1 |
| 15***99 | Sheet As | 1 |
| 15***96 | Sheet | 1 |
199-4652 Final Drive Gp
| 10***13 | Bolt As-Special; (M12x1.75x15-mm) | 1 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 3 |
| 19***09 | Cover As | 1 |
148-4628 Power Train Ar
| 08***07 | Pin | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***79 | Nut; (M36x4.0 Thd) | 2 |
145-3014 Sprocket Gp
| 14***14 | Sprocket Group | 1 |
| 15***96 | Cylinder Group-Counterweight | 1 |
| 15***96 | Frame Group-Upper | 1 |
Service Equipment And Supplies
180-6895 Film Gp
| 18***95 | Film Group | 1 |
176-0432 Film Gp
| 11***58 | Film - Air Cleaner (Later Machines Only) | 1 |
| 12***46 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 17***32 | Film Group | 1 |
202-2892 Film Gp
| 20***92 | Film Group | 1 |
202-2901 Film Gp
| 20***01 | Cover, Film Group | 1 |
152-9515 Film Gp
| 11***55 | Film-Air Cleaner (Later Amchines Only) | 1 |
| 12***44 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***15 | Film Group | 1 |
152-9514 Film Gp
| 12***43 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***14 | Film Group | 1 |
| 17***62 | Film-Warning; (Engine Speed Control) | 1 |
172-4955 Film Gp
| 12***45 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 17***55 | Film Group | 1 |
| 17***64 | Film-Warning; (Engine Speed Control)(Auto Engine Speed Control) | 1 |
158-0003 Plate & Film Gp
| 15***03 | Plate & Film Group | 1 |
202-2997 Plate & Film Gp
| 20***97 | Plate & Film Group | 1 |
202-3001 Plate & Film Gp
| 20***01 | Plate & Film Group | 1 |
202-2928 Plate & Film Gp
| 20***28 | Plate & Film Group; -Biodegradable Hydraulic Oil | 1 |
202-2999 Plate & Film Gp
| 20***99 | Plate & Film Group | 1 |
202-3000 Plate & Film Gp
| 20***00 | Plate & Film Group | 1 |
202-3003 Plate & Film Gp
| 20***03 | Plate & Film Group | 1 |
180-6794 Plate & Film Gp
| 18***94 | Plate & Film Group | 1 |
202-3002 Plate & Film Gp
| 20***02 | Plate & Film Group | 1 |
202-2998 Plate & Film Gp
| 20***98 | Plate & Film Group | 1 |
202-2996 Plate & Film Gp
| 20***96 | Plate & Film Group | 1 |
Undercarriage
168-6743 Adjustment Gp-Hydraulic Track
| 10***60 | Support As; (60mm) | 16 |
| 14***11 | Spacer; (30.5x55.X24mm Thk) | 32 |
| 16***43 | Adjustment Group-Hydraulic Track | 1 |
218-5381 Cover Gp-Undercarriage
| 10***60 | Support As; (60mm) | 16 |
| 14***11 | Spacer; (30.5x55.X24mm Thk) | 32 |
| 17***31 | Frame As-Track; (Rh) | 1 |
150-2802 Frame Ar-Undercarriage
| 14***11 | Spacer; (30.5x55.X24mm Thk) | 24 |
| 15***02 | Frame Ar-Undercarriage | 1 |
| 17***08 | Guard As-Track Guide | 2 |
158-0004 Frame Ar-Undercarriage
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 48 |
| 15***04 | Frame Ar-Undercarriage | 1 |
| 17***63 | Cover As; (Rh) | 1 |
172-3087 Frame Gp-Undercarriage
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 54 |
| 17***87 | Frame Group-Undercarriage | 1 |
| 17***49 | Cover As; (Rh) | 1 |
174-8433 Frame Gp-Undercarriage
| 14***09 | Idler Group-Front | 2 |
| 16***43 | Adjustment Group-Hydraulic Track | 2 |
| 17***33 | Frame Group-Undercarriage | 1 |
172-3001 Guard Gp-Track Guide
| 14***11 | Spring Group-Recoil | 1 |
| 17***01 | Guard Group-Track Guide; -Center | 1 |
| 19***57 | Motor Housing; Assembly, Drive, Motor Housing; Assembly, Drive, Idler Group-Front | 1 |
174-8499 Guard Gp-Track Guide
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 2 |
| 17***14 | Ring-Toric | 2 |
| 17***25 | Seal Group-Duo-Cone | 2 |
186-5655 Guard Gp-Track Guide
| 17***17 | Link-Track; (Rh)(Rh) | 47 |
| 17***18 | Link-Track; (Lh)(Lh) | 47 |
| 17***19 | Pin-Track | 46 |
174-8498 Guard Gp-Track Guide
| 09***12 | Setscrew-Socket; (M20x2.5x25-mm) | 4 |
| 14***09 | Idler Group-Front | 2 |
| 16***43 | Adjustment Group-Hydraulic Track | 2 |
167-9841 Guard Gp-Travel Motor
| 16***41 | Guard Group-Travel Motor | 1 |
| 17***17 | Link-Track; (Rh)(Rh) | 51 |
| 17***18 | Link-Track; (Lh)(Lh) | 51 |
167-9842 Guard Gp-Travel Motor
| 10***53 | Bolt; (M30x3.5x150-mm) | 64 |
| 16***42 | Guard Group-Travel Motor | 1 |
| 17***74 | Roller Group-Track Carrier | 6 |
145-3015 Idler Gp-Front
| 10***53 | Bolt; (M30x3.5x150-mm) | 64 |
| 14***15 | Idler Group-Front | 1 |
| 18***65 | Roller Group-Track-Single Flange | 10 |
194-1157 Idler Gp-Front
| 10***53 | Bolt; (M30x3.5x150-mm) | 72 |
| 17***74 | Roller Group-Track Carrier | 6 |
| 18***65 | Roller Group-Track-Single Flange | 10 |
145-3008 Idler Gp-Front
| 10***53 | Bolt; (M30x3.5x150-mm) | 72 |
| 14***08 | Idler Group-Front | 1 |
| 17***74 | Roller Group-Track Carrier | 6 |
145-3009 Idler Gp-Front
| 10***53 | Bolt; (M30x3.5x150-mm) | 64 |
| 14***09 | Idler Group-Front | 1 |
| 17***74 | Roller Group-Track Carrier | 6 |
174-0215 Link As-Track
| 17***15 | Link As-Track | 1 |
| 17***41 | Shaft As-Track | 1 |
| 4H***05 | Packing,Preformed Part Of Kit P/N 4s***42 | 1 |
174-0216 Link As-Track
| 17***13 | Ring-Toric | 2 |
| 17***11 | Seal Group-Duo-Cone | 1 |
| 17***16 | Link As-Track | 1 |
179-3020 Roller Ar-Track & Carrier
| 16***33 | Rod | 1 |
| 16***34 | Support As | 1 |
| 16***38 | Spring | 1 |
145-3012 Roller Ar-Track & Carrier
| 14***12 | Roller Ar-Track & Carrier | 1 |
| 17***32 | Seal Group-Duo-Cone | 2 |
| 17***91 | Collar-Track Roller | 2 |
145-3013 Roller Ar-Track & Carrier
| 14***13 | Roller Ar-Track & Carrier | 1 |
| 17***32 | Seal Group-Duo-Cone | 2 |
| 17***91 | Collar-Track Roller | 2 |
179-3021 Roller Ar-Track & Carrier
242-4066 Roller Gp-Track Carrier
| 17***15 | Link As-Track | 1 |
| 17***21 | Bolt-Track | 188 |
| 17***22 | Nut-Track | 188 |
175-3274 Roller Gp-Track Carrier
| 17***15 | Link As-Track | 1 |
| 17***21 | Bolt-Track | 188 |
| 17***22 | Nut-Track | 188 |
185-5102 Roller Gp-Track-Double Flange
| 17***15 | Link As-Track | 1 |
| 17***21 | Bolt-Track | 188 |
| 17***22 | Nut-Track | 188 |
185-5065 Roller Gp-Track-Single Flange
| 17***16 | Link As-Track | 1 |
| 17***21 | Bolt-Track | 204 |
| 17***22 | Nut-Track | 204 |
145-3011 Spring Gp-Recoil
| 14***11 | Spring Group-Recoil | 1 |
| 17***16 | Link As-Track | 1 |
| 17***21 | Bolt-Track | 204 |
174-0208 Track Gp
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
174-0213 Track Gp
| 17***13 | Track Group | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
174-0214 Track Gp
| 15***39 | Piston | 1 |
| 15***41 | Piston | 1 |
| 15***42 | Guide | 1 |
174-0206 Track Gp
| 17***06 | Track Group | 1 |
| 17***16 | Link As-Track | 1 |
| 17***21 | Bolt-Track | 204 |
174-0211 Track Gp
| 17***11 | Track Group | 1 |
| 21***06 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 21***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
174-0209 Track Gp
| 17***09 | Track Group | 1 |
| 4I***90 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 4I***56 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
174-0207 Track Gp
| 17***07 | Track Group | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
158-0005 Track Gp
| 15***05 | Track Group | 1 |
| 17***16 | Link As-Track | 1 |
| 17***21 | Bolt-Track | 204 |
174-0212 Track Gp
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
Work Tools
305-1751 Adjuster Gp-Bucket -Wb/Hb/Jb-Family
| 15***97 | Adapter | 5 |
| 18***88 | Edge As | 1 |
| 20***92 | Plate-Wear | 2 |
7y-3477 Adjuster Gp-Bucket
| 11***79 | Sidecutter Group | 1 |
| 16***12 | Bucket & Adjuster Group | 1 |
| 6I***14 | Tip Group-Long; -J-600 | 5 |
193-5019 Bucket & Adjuster Gp
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 3 |
| 11***05 | Adapter-Tip; (J-600, 2-Strap, Rh) | 1 |
| 11***06 | Adapter-Tip; (J-600, 2-Strap, Lh) | 1 |
168-2912 Bucket & Adjuster Gp
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 4 |
| 11***05 | Adapter-Tip; (J-600, 2-Strap, Rh) | 1 |
| 11***06 | Adapter-Tip; (J-600, 2-Strap, Lh) | 1 |
202-5113 Bucket & Adjuster Gp
| 20***13 | Bucket & Adjuster Group | 1 |
193-5042 Bucket & Adjuster Gp -Excavation, Jb-Family
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 3 |
| 11***05 | Adapter-Tip; (J-600, 2-Strap, Rh) | 1 |
| 11***06 | Adapter-Tip; (J-600, 2-Strap, Lh) | 1 |
202-5077 Bucket & Adjuster Gp
| 20***77 | Bucket & Adjuster Group | 1 |
190-3317 Bucket & Adjuster Gp
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 6 |
| 19***17 | Bucket & Adjuster Group | 1 |
| 20***44 | Edge As | 1 |
190-3318 Bucket & Adjuster Gp
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 3 |
| 11***05 | Adapter-Tip; (J-600, 2-Strap, Rh) | 1 |
| 11***06 | Adapter-Tip; (J-600, 2-Strap, Lh) | 1 |
190-3320 Bucket & Adjuster Gp
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 2 |
| 11***05 | Adapter-Tip; (J-600, 2-Strap, Rh) | 1 |
| 11***06 | Adapter-Tip; (J-600, 2-Strap, Lh) | 1 |
190-3321 Bucket & Adjuster Gp
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 2 |
| 11***05 | Adapter-Tip; (J-600, 2-Strap, Rh) | 1 |
| 11***06 | Adapter-Tip; (J-600, 2-Strap, Lh) | 1 |
190-3319 Bucket & Adjuster Gp
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 1 |
| 11***05 | Adapter-Tip; (J-600, 2-Strap, Rh) | 1 |
| 11***06 | Adapter-Tip; (J-600, 2-Strap, Lh) | 1 |
193-5037 Bucket & Adjuster Gp
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 5 |
| 11***05 | Adapter-Tip; (J-600, 2-Strap, Rh) | 1 |
| 11***06 | Adapter-Tip; (J-600, 2-Strap, Lh) | 1 |
193-5052 Bucket & Adjuster Gp
| 19***52 | Bucket & Adjuster Group | 1 |
188-2385 Bucket Ar
| 18***85 | Bucket Ar | 1 |
188-2387 Bucket As -Hb-Family
| 18***87 | Bucket As; -Hb-Family | 1 |
209-8021 Bucket As-Excavation
| 20***21 | Bucket As-Excavation | 1 |
| 23***70 | Retainer-G.E.T.; (K-170) | 1 |
| 23***77 | Tip-Spike; (K-170, With Lifting Eye) | 1 |
209-8019 Bucket As-Excavation
| 20***19 | Bucket As-Excavation | 1 |
| 22***53 | Tip-Penetration Plus; (K-150) | 1 |
| 23***50 | Retainer-G.E.T.; (K-150) | 1 |
209-7975 Bucket As-Excavation
| 20***75 | Bucket As-Excavation | 1 |
209-8023 Bucket As-Excavation
| 20***23 | Bucket As-Excavation | 1 |
| 22***70 | Tip-Wide; (K-170) | 1 |
| 23***70 | Retainer-G.E.T.; (K-170) | 1 |
209-8020 Bucket As-Excavation
| 20***20 | Bucket As-Excavation | 1 |
| 22***57 | Tip-Spike | 1 |
| 23***50 | Retainer-G.E.T.; (K-150) | 1 |
209-8024 Bucket As-Excavation
| 20***24 | Bucket As-Excavation | 1 |
202-5117 Bucket As-Excavation
| 20***17 | Bucket As-Excavation | 1 |
209-7972 Bucket As-Excavation
| 20***72 | Bucket As-Excavation | 1 |
193-5053 Bucket As-Excavation
| 19***53 | Bucket As-Excavation | 1 |
209-7978 Bucket As-Excavation
| 11***92 | Protector-Side Bar | 2 |
| 13***99 | Retainer As-G.E.T. | 4 |
| 13***08 | Pin | 4 |
209-7973 Bucket As-Excavation
| 20***73 | Bucket As-Excavation | 1 |
209-8022 Bucket As-Excavation
| 19***51 | Tip-Wide; (K-150, Includes Lifting Eye) | 1 |
| 20***22 | Bucket As-Excavation | 1 |
| 23***50 | Retainer-G.E.T.; (K-150) | 1 |
209-8026 Bucket As-Excavation
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
| 12***24 | Hose | 1 |
| 12***57 | Clamp | 2 |
209-7977 Bucket As-Excavation
| 10***59 | Retainer As.-Ground Engaging Tool | 4 |
| 15***77 | Protector | 2 |
| 17***30 | Pin | 4 |
209-7974 Bucket As-Excavation
| 20***74 | Bucket As-Excavation | 1 |
209-8017 Bucket As-Excavation
| 20***17 | Bucket As-Excavation | 1 |
| 23***70 | Retainer-G.E.T.; (K-170) | 1 |
| 23***78 | Tip-Double Spike; (K-170) | 1 |
209-7981 Bucket As-Excavation
| 20***81 | Bucket As-Excavation | 1 |
| 22***58 | Tip Group-Double Spike | 1 |
| 23***50 | Retainer-G.E.T.; (K-150) | 1 |
209-7979 Bucket As-Excavation
| 20***79 | Bucket As-Excavation | 1 |
| 23***69 | Sidecutter; (Rh) | 1 |
| 23***70 | Sidecutter; (Lh) | 1 |
209-8018 Bucket As-Excavation
| 20***18 | Bucket As-Excavation | 1 |
| 6I***02 | Tip-Long | 1 |
| 6I***08 | Pin-G.E.T. | 1 |
209-8025 Bucket As-Excavation
| 20***25 | Bucket As-Excavation | 1 |
202-5114 Bucket As-Excavation
| 20***14 | Bucket As-Excavation | 1 |
202-5110 Bucket As-Excavation
| 20***10 | Bucket As-Excavation | 1 |
202-5112 Bucket As-Excavation
| 20***12 | Bucket As-Excavation | 1 |
202-5106 Bucket As-Excavation
| 20***06 | Bucket As-Excavation | 1 |
193-5038 Bucket As-Excavation
| 19***38 | Bucket As-Excavation | 1 |
202-5108 Bucket As-Excavation
| 20***08 | Bucket As-Excavation | 1 |
193-5020 Bucket As-Excavation
| 19***20 | Bucket As-Excavation | 1 |
195-5110 Protector Gp
| 18***84 | Hose-Drain | 2 |
| 19***10 | Protector Group | 1 |
| 8M***73 | Clip; (17.46mm Id)(Hose As To Mag Drive Housing) | 4 |
112-2491 Protector Gp-Side Bar
| 11***91 | Protector Group-Side Bar; -Sidebar | 1 |
| 14***71 | Duct Group-Defroster | 1 |
| 14***72 | Duct Group-Cab Air | 1 |
112-2479 Sidecutter Gp
| 09***92 | Washer, Tooth | 1 |
| 11***79 | Sidecutter Group | 1 |
| 13***96 | Relay; (Clutch Solenoid) | 1 |
232-0075 Tip Gp-Double Spike
| 13***16 | Packing | 2 |
| 16***89 | Bracket As | 1 |
| 23***75 | Tip Group-Double Spike; -K-170 | 1 |
229-7165 Tip Gp-Double Spike -K-150
| 13***63 | Valve As; (Expansion) | 1 |
| 13***70 | Switch As-Pressure; (Refrigerant Pressure Cutoff) | 1 |
| 14***12 | Core As-Evaporator; (Refrigerant) | 1 |
6i-6314 Tip Gp-Long
| 09***92 | Washer, Tooth | 3 |
| 14***31 | Clamp | 1 |
| 14***32 | Clip | 2 |
229-7163 Tip Gp-Penetration Plus -K-150
| 09***44 | Screw-Machine; (M8x1.25x12-mm) | 4 |
| 09***76 | Nut; (M14x2-Thd) | 1 |
| 22***63 | Tip Group-Penetration Plus; -K-150 | 1 |
229-7164 Tip Gp-Spike -K-150
| 08***37 | Nozzle As | 1 |
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 1 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
232-0074 Tip Gp-Spike -With Lifting Eye
| 08***37 | Nozzle As | 1 |
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 1 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
229-7160 Tip Gp-Wide
| 08***37 | Nozzle As | 1 |
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 1 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
232-0070 Tip Gp-Wide -K-170
| 08***37 | Nozzle As | 1 |
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 1 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
233-7170 Tip-Extra Duty -A.R.M., With Lifting Eye
| 08***37 | Nozzle As | 1 |
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 1 |
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
233-7171 Tip-Penetration -A.R.M.
| 11***77 | Cover Group-Storage | 1 |
| 12***46 | Lockwasher | 2 |
| 13***46 | Cover Assem. | 1 |
385B serial number reference
The PIN plate on a 385B sits on the right-hand exterior of the cab structure, just below the cab window. On the full 17-character PIN used from 2001 on, the model descriptor '0385B' occupies the middle block, followed by a single check character, then the three-letter prefix and five-digit machine sequence number (for example, a PIN reading CAT0385BCANS00237 breaks down to prefix ANS, unit 00237).
| Prefix | Identifies | Notes |
|---|---|---|
| CLS | 385B, standard undercarriage | Belgian-built large excavator, model years approx. 2002 to 2005. Runs the Cat 3456 engine (ATAAC). |
| RCD | 385B, standard undercarriage | Belgian-built, model years approx. 2003 to 2005. Cat 3456 engine. |
| FDL | 385B L, long-undercarriage configuration | Belgian-built, model years approx. 2001 to 2005. Cat 3456 engine. Some documentation lists this prefix under plain 385B as well as 385B L - check the machine's own PIN plate to confirm the exact configuration. |
| ANS | 385B (large excavator family) | Documented on an early-production unit dated 2001. Cat 3456 engine family. Standard vs long-undercarriage configuration not separately confirmed - confirm with dealer. |
| MYA | 385B (large excavator family) | Appears in parts and service documentation for the 385B with the Cat 3456 engine. Configuration (standard vs L) not separately confirmed - confirm with dealer. |
| BKX | 385B (large excavator family) | Documented on a higher-hour production unit and in service documentation for the 385B. Configuration not separately confirmed - confirm with dealer. |
| BKF | 385B / 385B L (large excavator family) | Appears in 385B service documentation and, grouped together with BLY and BKX, in a combined 385B L shop-manual listing. Confirm exact configuration with dealer. |
| BLY | 385B / 385B L (large excavator family) | Same grouping as BKF and BKX - standalone listings label it plain 385B, a combined shop manual groups it under 385B L. Confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar 385B use?
The 385B runs Caterpillar's 3456 ATAAC inline-six diesel: turbocharged, air-to-air aftercooled, with electronic unit injection and ADEM II control. Gross power is 395 kW (530 hp) and net flywheel power is 382-383 kW (513 hp), both at 1800 rpm. This is not the C18 ACERT engine; that belongs to the later 385C generation.
What is the operating weight of the Caterpillar 385B?
Operating weight runs about 83.5-84 tonnes (184,000-185,500 lb) in standard-undercarriage form and roughly 86-90 tonnes (190,000-198,000 lb) for the long-reach 385B L, depending on boom, stick, and counterweight. Configuration and undercarriage width both move the number, so check the specific machine's spec plate for an exact figure.
What replaced the Caterpillar 385B?
Caterpillar succeeded the 385B with the 385C, introduced around 2005, which switched to the C18 ACERT engine and later emissions controls. The 385 platform was eventually folded into Caterpillar's 390 large-excavator line.
What 385B owners discuss
What engine powers the Cat 385B and what should owners watch for?
The 385B runs Caterpillar's 3456 ATAAC inline-six diesel, rated near 395 kW (530 hp) gross at 1800 rpm. This is a different engine from the C18 ACERT fitted to the later 385C-generation machines - don't cross-apply C18 troubleshooting notes or specs to a 385B. The 3456 uses a head-mounted camshaft for high injection pressure, so fuel and oil cleanliness drive injector life as much as fuel quality does; stretched oil-change intervals and water-contaminated fuel are the two things owners flag most for shortened injector life. ATAAC (air-to-air aftercooling) needs a clean core to hold intake air temperature down - a plugged or bent core shows up first as soft power and dark exhaust under load, before it shows up as overheating.
Why does the swing sometimes drag and then lurch on a 385B?
This behavior is most often traced to internal leakage in the swing motor or a control-valve spool that's sticking, not a worn swing bearing. The 385B uses an independent three-pump hydraulic layout with a dedicated swing circuit under proportional priority pressure-compensated control, so a leaking motor or sticky spool shows up as hesitation at the start of swing followed by a lurch once flow catches up, before outright torque loss becomes obvious. Diagnosis starts with pressure and flow checks at the swing motor ports rather than pulling the swing bearing. Have your dealer verify swing motor and control-valve condition before committing to a repair.
Where do final drive and swing gearbox leaks usually show up on a 385B?
On the final drives, the recurring leak point is the floating face (duo-cone) seal that keeps gear oil inside the planetary hub; once it starts weeping, oil shows up between the sprocket and the final drive housing and the drive needs more frequent gear-oil top-offs until it's fixed. On the swing gearbox, the common leak point is the output pinion where the shaft exits into the housing - the seal there hardens with age and heat and starts to pass oil, and hard swing use in hot weather speeds it up. Washing down the undercarriage and swing gearbox area between shifts makes both leaks easier to catch early, before dirt gets pulled into the joint. Have your dealer verify seal condition before it progresses to contamination inside the housing.
What undercarriage wear pattern is typical for a 385B?
Track pins on the 385B are sealed and lubricated - center-drilled with cross-drilled bushings so the pin/bushing joint runs in its own oil reservoir instead of relying on ambient grease, which stretches bushing life and cuts travel noise versus a plain grease-lubricated joint. Shoes are heavy-duty double-grouser, offered in more than one width for different ground conditions. Wear checks follow the same pattern as other excavators in this weight class: measure sag across several links to judge tension, and watch grouser height loss as the first sign of wear - abrasive or rocky ground eats grouser height well before the pins show play. Track run too tight wears faster than track run slightly loose, so check tension before condemning a used undercarriage on inspection.
What electrical or sensor issues come up on this generation of 385B?
Most electrical complaints trace back to connectors and harness routing rather than the ECM itself - moisture intrusion at connector pins, harness chafing where it routes near the engine or swing frame, and a weak battery or charging system all produce inconsistent fault codes or hard starts that look like a sensor failure but aren't. Loss of signal from the engine speed/timing sensors will stop the ECM from firing injectors outright, so a no-start with no obvious mechanical cause points there first. Basic troubleshooting is a multimeter check of the suspect sensor against factory spec plus a visual check of connector seating and harness condition, before parts get swapped. Have your dealer verify ECM fault history and sensor readings on any code that won't clear.
How does the 385B hold up in dusty or quarry-type conditions?
The cooling package places the coolant radiator and hydraulic oil cooler side by side rather than stacked, which keeps both cores more accessible for cleaning and cuts recirculated heat between them - useful where core cleaning is a daily task. The cab runs positive-pressure filtered ventilation with a fresh/recirculated air switch, which keeps cab dust down but doesn't substitute for keeping the engine air filter and ATAAC cooler core clean. Owners running this class of machine in quarry or mass-excavation dust treat air filter and aftercooler core checks as a first-line defense for turbo and injector life, not an afterthought.
What should a buyer check on a used 385B?
Hours alone don't disqualify a machine - a well-maintained unit in the 8,000 to 10,000 hour range is generally considered to still have meaningful life left, with final drives on Cat excavators this size often running well past that mark before needing attention. Beyond the hour meter: cycle the swing through full-lock turns both directions checking for the drag-then-lurch pattern that points to motor or valve wear; check the final drive sprockets and swing gearbox output pinion for oil weep; measure track sag and grouser height rather than trusting a visual pass; ask for boom and stick weld or repair history, since box-section booms on machines this size see fatigue stress over years of digging cycles; and pull ECM fault code history if the seller has dealer access. Have your dealer verify swing hydraulics, final drive/swing gearbox seal condition, and ECM history before finalizing a purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 385B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.