Caterpillarexcavator
Caterpillar 308C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 308C CR is a compact-radius mini/midi excavator in Caterpillar’s 8-tonne class, sold new from roughly 2002 to 2008 under the KCX serial prefix (CRW and CPE prefixes trace to the same line, differing mainly by boom/stick configuration). It runs a Mitsubishi 4M40-E1 four-cylinder diesel of 2.84 L displacement, rated 41 kW (55 hp) gross and 41 kW (54 hp) at the flywheel, with mechanical fuel injection and no engine control module. Factory operating weight runs roughly 7,430-8,040 kg (16,370-17,730 lb) depending on stick length (1665 mm/5'6" medium or 2210 mm/7'3" long), track shoe width (450 mm/18" or 600 mm/24" triple grouser, or optional segmented rubber track), and whether a dozer blade is fitted. It is the compact-radius derivative of the conventional-tail 307C, sharing that machine's undercarriage and most linkage pin sizes, and it was superseded by the 308D CR from around 2008.
Against the 307C it effectively replaced in tight-clearance work, the 308C CR cut tail swing radius to about 1290 mm (4'3"), added a redesigned cab with a sliding door, extended front-linkage greasing intervals through sintered self-lube bushings, and raised pilot hydraulic pressure for finer control. The follow-on D-series carried the compact-radius layout forward with higher bucket and stick digging forces, but is a distinct generation with its own parts and service specs. In the used and parts market, the 308C CR's draw is its simple mechanical fuel system: no ECM, no aftertreatment, and few sensors beyond coolant temperature, hydraulic oil temperature, and fuel level gauges, which keeps diagnosis and repair straightforward on an older machine still common on urban and utility sites.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 308C specifications
Engine
| Engine model | Mitsubishi 4M40-E1, four-cylinder diesel (marketed on the machine as the Cat/MMC 4M40 diesel engine) |
| Gross power | 41 kW (55 hp) |
| Net/flywheel power | 41 kW (54 hp), rated to ISO 9249, SAE J1349 and EEC 80/1269 |
| Displacement | 2.84 L (173 in³), 95 mm bore x 100 mm stroke |
| Cylinders | 4 |
| Emissions tier | Not stated on the factory spec sheet for this generation (2002-2008 build); predates common EPA/EU tier labeling for this size class - verify current legality with your dealer if importing |
Weights
| Operating weight (as equipped) | 8040 kg (17,730 lb) with 2470 mm (8'1") blade, one-piece boom, 2210 mm (7'3") stick, 600 mm (24") shoes and 600 mm (24") bucket |
| Operating weight, medium (1665 mm/5'6") stick | 7430 kg (16,370 lb) on standard 450 mm (18") triple-grouser shoes; 7600 kg (16,760 lb) on optional 600 mm (24") shoes |
| Operating weight, long (2210 mm/7'3") stick | 7470 kg (16,470 lb) on standard 450 mm (18") shoes; 7650 kg (16,860 lb) on optional 600 mm (24") shoes |
| Weight adders | add 380 kg (850 lb) for the 2320 mm (7'7") blade, 390 kg (870 lb) for the 2470 mm (8'1") blade, or 23 kg (100 lb) for 450 mm (18") segmented rubber track |
| Ground pressure | 32.4 kPa (4.70 psi) on standard 450 mm (18") triple-grouser shoes; 24.9 kPa (3.61 psi) on optional 600 mm (24") shoes; 32.6 kPa (4.73 psi) on 450 mm (18") segmented rubber track |
| Transport weight | Not published as a separate figure from operating weight in factory literature; use the operating-weight values above for transport planning |
Dimensions
| Transport length | 5830 mm (19'2") with 1665 mm (5'6") stick; 5850 mm (19'2") with 2210 mm (7'3") stick |
| Transport width | 2320 mm (7'7") on 450 mm (18") shoes; 2470 mm (8'1") on 600 mm (24") shoes |
| Shipping height | 2610 mm (8'7") with 1665 mm (5'6") stick; 2740 mm (9'0") with 2210 mm (7'3") stick |
| Tail swing radius | 1290 mm (4'3"), same for both stick lengths - compact-radius (CR) design |
| Track shoe width | 450 mm (18") triple-grouser standard; 600 mm (24") triple-grouser optional; 450 mm (18") segmented rubber track optional |
| Ground clearance | 384 mm (15") |
| Undercarriage length | 2280 mm (7'6") center-to-center of rollers; 2910 mm (9'7") overall track length; 1870 mm (6'2") track gauge |
Performance
| Max dig depth | 4140 mm (13'7") with 1665 mm (5'6") stick; 4690 mm (15'5") with 2210 mm (7'3") stick |
| Max reach at ground level | 6250 mm (20'6") with 1665 mm (5'6") stick; 6770 mm (22'3") with 2210 mm (7'3") stick |
| Max dump/loading height | 5250 mm (17'3") with 1665 mm (5'6") stick; 5670 mm (18'7") with 2210 mm (7'3") stick |
| Max cutting height | 7390 mm (24'3") with 1665 mm (5'6") stick; 7810 mm (25'7") with 2210 mm (7'3") stick |
| Swing speed | 11.5 rpm; swing torque 16 000 N·m (11,800 lb ft) |
| Travel speed | 5.3 kph (3.3 mph), two-speed auto-shift travel |
| Gradeability | Not published in factory literature for this model |
| Drawbar pull | 57 kN (12,810 lb) maximum |
Forces
| Bucket digging force (SAE) | 44 kN (9,820 lb) with 1665 mm (5'6") stick; 44 kN (9,840 lb) with 2210 mm (7'3") stick - essentially unchanged between stick lengths |
| Stick/arm digging force (SAE) | 35 kN (7,850 lb) with 1665 mm (5'6") stick; 31 kN (6,880 lb) with 2210 mm (7'3") stick - the longer stick trades digging force for added reach |
Service capacities (summary)
| Fuel tank | 115 L (30.4 gal) |
| Hydraulic system | 92 L (24.3 gal) total including tank; 55 L (14.5 gal) in the tank alone |
| Engine oil | 10 L (2.6 gal) |
| Cooling system | 15 L (4 gal) |
| Swing and final drives | swing drive 1.5 L (0.4 gal); each final drive 1.3 L (0.34 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
308C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 9.8 L (2.6 US gal) | Cat DEO or DEO-ULS diesel engine oil. SAE 15W-40 covers general and warm-climate operation; SAE 10W-30 for cold starts down to about -18 C. Cat's wider multigrade line (0W-40, 5W-40) is listed for arctic ambient ranges on the manufacturer's oil viscosity-by-temperature guide. |
| Cooling system | 15.1 L (4.0 US gal) | Cat ELC (Extended Life Coolant, organic acid technology) is the preferred fill for long-drain service. Cat DEAC conventional coolant is an accepted alternative but needs periodic supplemental coolant additive and shorter drain intervals. ELC and DEAC must not be mixed in the same system. |
| Fuel tank | 115 L (30.4 US gal) | Ultra-low-sulfur diesel (15 ppm sulfur max). Biodiesel blends up to B20, or HVO renewable diesel, are accepted for this engine family per Cat fuel guidance. |
| Hydraulic system total | 92 L (24.3 US gal) | Cat HYDO Advanced (SAE 10W, 20W or 30W monograde, selected by season) is the first-choice fluid for this machine's hydraulic and hydrostatic circuits. Cat DEO 15W-40 or Cat TDTO 10W are listed as accepted second-choice fills. |
| Hydraulic tank | 55-56 L (14.5-14.8 US gal) - varies slightly by swing-radius configuration | Same fluid as the hydraulic system total: Cat HYDO Advanced, with Cat DEO or Cat TDTO as accepted alternates. |
| Final drive (each side) | 1.3 L (0.34 US gal) per side | Cat TDTO (Transmission/Drive Train Oil). SAE 10W for cold weather, SAE 30 for moderate climates, SAE 50 for sustained hot-climate operation. |
| Swing drive | 1.5 L (0.40 US gal) | Cat TDTO, same SAE 10W/30/50 climate-based grade selection used for the final drives. |
| Pilot/other circuits | Not separately documented - pilot circuit draws from the main hydraulic tank fill | Same fluid as the main hydraulic system (Cat HYDO Advanced or approved alternate); no separate pilot reservoir capacity is published for this class of machine. |
| Grease (spec only) | Not applicable - serviced per grease-point schedule, no bulk fill capacity published | Cat MPGM (Multipurpose Grease, moly-fortified, roughly 5 percent molybdenum disulfide) for boom, stick and bucket pins, bushings, and the swing bearing. Cat Advanced 3-Moly grease is an accepted equivalent for medium-load points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 308C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 308C beyond the schedule
Predictive Maintenance & Fluid Analysis
The 4M40-E1 runs mechanical injection with no ECM, so the monitor panel shows only coolant temperature, hydraulic oil temperature, and fuel level - it will not flag wear before failure. Build a sampling program instead: pull engine oil, hydraulic oil, and final-drive and swing-drive oil at each interval and trend for metal content. Rising iron or copper in a final-drive sample flags travel motor wear early. Water after wet-season work points to a cab or tank seal to chase before the injection pump or swing bearing takes damage.
Corrective & Common Repairs
Corrective work on the 308C CR centers on the compact-radius swing frame, the sliding cab door track, and the two-speed auto-shift travel motors. An erratic shift near the switch point usually traces to the counterbalance or crossover relief valve, not the motor. Boom and stick cylinder snubbers wear from repeated bucket-curl shock and should be checked alongside cylinder seals during any hydraulic repair. Since the fuel system is fully mechanical, rough idle or hard starting almost always traces to the injection pump, injectors, or glow plugs, not a sensor fault.
Overhaul & Rebuild Points
Rebuild candidates on a high-hour 308C CR are the standard undercarriage (rollers, idlers, sprockets, and grease-lubricated track links), plus the swing bearing, swing gear, and the final drive/travel motor pairs. The cast-iron block with laser-hardened upper bores tolerates wear well, but the mechanical injection pump and injectors should be reconditioned once fuel samples or falling power show declining combustion efficiency. Boom, stick, and bucket cylinders are good candidates for a full reseal at overhaul, since the snubbers that cushion cycle shock wear alongside the seals.
Seasonal & Environment Servicing
Cold-climate 308C CR units depend on glow plugs and two 100 Ah batteries for starts down to -32 C (-25 F); check glow plugs and battery state before winter layup. Machines built with the extended-life -50 C (-58 F) coolant option need that fluid confirmed at every top-off, not mixed with standard antifreeze. In hot or dusty work, clean the wave-fin radiator core and oil cooler often, since clogging is the main heat-related failure path. Urban work on pavement wears optional rubber track pads faster than open-site duty.
308C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 134-8726 | Filter Element As-Air | Air intake service | Check fitment → |
| 095-4320 | O-Ring, Oil Filter Head | Lubrication service | Check fitment → |
| 094-9680 | O-Ring, Oil Filter-Oil Cooler | Lubrication service | Check fitment → |
| 094-9681 | O-Ring, Oil Filter | Lubrication service | Check fitment → |
| 137-3619 | Screen-Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
308C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Coolant Temperature gauge - red-zone/high-temp warning | Engine coolant temperature reading has moved into the warning range on the monitor panel gauge. | Low coolant level, blocked or dirty radiator core, slipping or failed fan drive, thermostat stuck closed, or a faulty coolant temperature sender. | Idle down and reduce load, check coolant level and radiator/cooler fins for debris once safe to open, verify fan operation before returning to work. |
| Hydraulic Oil Temperature gauge - red-zone/high-temp warning | Hydraulic tank oil temperature reading has moved into the warning range on the monitor panel gauge. | Low hydraulic oil level, clogged oil cooler fins, weak or failing cooler fan, a relief valve stuck open, or sustained high-load operation in hot ambient conditions. | Reduce load and let the machine idle, check hydraulic oil level and cooler for debris, allow the system to cool before resuming work. |
| Fuel Level gauge - low fuel warning | Fuel level in the tank has dropped into the reserve range shown on the monitor panel. | Normal fuel consumption nearing empty, or a fuel sender/wiring fault causing a falsely low reading. | Refuel; if the gauge does not respond after refueling, check the tank sender and its wiring. |
| Monitor panel key-on self-test (all indicators + action alarm, approx. 2.5 seconds) | Bulb-check routine on the 308C monitor panel: every indicator lights and the action alarm sounds briefly when the start switch is turned to ON, confirming the panel and alarm circuit are working. | Not a fault when it behaves normally; failure of any lamp or the alarm to activate at key-on points to a blown bulb, a panel power-supply fault, or a bad ground in the alarm circuit. | Confirm every indicator and the alarm activate at each key-on; if one does not, check monitor panel fuses, power feed, and grounds before chasing individual sensors. |
| Action alarm / Level 2 system warning (flashing action lamp plus buzzer) | Mid-level warning showing that a monitored system - coolant or hydraulic oil temperature - is trending out of the acceptable range; tells the operator to change how the machine is being run. | Rising coolant or hydraulic oil temperature approaching its high limit, often tied to a cooling system restriction or heavy sustained load. | Reduce engine and hydraulic load, let temperatures come back down, then check the affected gauge circuit and cooling components if the warning repeats. |
| Charging system (alternator) warning lamp | Battery is not receiving charge from the alternator; lamp stays on with the engine running. | Broken or slipping alternator belt, failed alternator, or loose/corroded battery and alternator wiring. | Check belt condition and tension, battery terminals, and alternator output with a multimeter before replacing the alternator. |
| Engine oil pressure warning lamp | Engine oil pressure has dropped below the safe minimum. | Low engine oil level, a failing oil pump, a blocked oil filter, or a faulty oil pressure switch/sender. | Shut down right away, check oil level and filter condition, and verify the pressure sender before restarting. |
| Glow plug / cold-start preheat indicator | Shows that the preheat cycle is active before cranking in cold conditions. | An extended preheat cycle or a lamp that will not go out points to a faulty glow plug relay, an individual glow plug, or a preheat wiring/timer fault. | Time the preheat cycle, check relay operation, then check individual glow plug resistance and continuity before replacing parts. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
308C attachments & work tools
Buckets
Factory buckets are general-purpose design in four widths: 460 mm (18 in) at 0.15 m3 (0.2 yd3), 610 mm (24 in) at 0.23 m3 (0.3 yd3), 760 mm (30 in) at 0.31 m3 (0.4 yd3), and 910 mm (36 in) at 0.34 m3 (0.45 yd3). Recommended maximum material density is 1800 kg/m3 (3000 lb/yd3) for the two narrower buckets, dropping to 1200-1500 kg/m3 (2000-2500 lb/yd3) for the two wider buckets on the long stick. Buckets pin on directly to the stick and bucket linkage; stick/link pin diameter is 45 mm (1.77 in), shared with the 307C in the same compact-radius family (later D-series machines in this size class step up to a 50 mm pin, so don't cross-shop pins by ton class alone).
Hydraulic hammers
The 308C sits in the 7-9 metric ton mini-excavator hammer bracket. Cat's fitment for this bracket runs a mid-size breaker class, with breaker-only operating weight roughly 425-630 kg (935-1,380 lb) and impact energy about 1000-1500 ft-lbf (1350-2030 J), mounted through a tool-interface bracket and run off the machine's first auxiliary hydraulic circuit. Factory literature from the 307C/308C generation also referenced a lighter breaker class for this same weight bracket, so confirm exact current fitment with a dealer chart before ordering.
Quick couplers
Work tools pin on directly to the stick as standard; an 8-ton-class hydraulic pin-grabber coupler is the common factory fit for this weight bracket, including a tilting pin-grabber version usable in front-shovel mode with buckets. A manual (spindle) coupler is also offered for this class where hydraulic tool-change isn't required. Coupler operation draws off the machine's auxiliary circuit and needs dedicated factory-installed plumbing.
Thumbs/grapples
A utility hydraulic thumb around 430-440 mm (17 in) wide with a multi-tooth grab pattern is the factory fit for this 7-9 ton bracket; heavier Pro-series hydraulic thumbs up to about 860 mm (34 in) are also offered for rip-rap and demolition-grade material handling, both running off the first auxiliary circuit. Tool-interface grapples sized for the 7-10 ton bracket cover general material handling and demolition/sorting duty; general-purpose grapples run off the first auxiliary circuit, while demolition/sorting grapples need the second auxiliary circuit.
Rippers
Cat's factory mini-excavator attachment lineup does not list a dedicated ripper for this class. Single-shank rippers for the 308C are an aftermarket item, pinned directly to the stick on the same 45 mm linkage pins as the bucket, and suit light scarifying of packed soil, asphalt, or shallow rock rather than production ripping.
Hydraulic-kit notes
The 308C runs a two-pump, open-center hydraulic system rated up to 64 L/min (17 gpm) per pump at up to about 27 460 kPa (3980 psi) on the main implement circuit -- a standard-flow platform, not a high-flow one. The auxiliary/blade circuit is rated to 34 L/min (9 gpm) at about 20 600 kPa (2990 psi), enough for a single-function tool like a hammer; double-function and combined single/double-function auxiliary arrangements are factory options needed to run two-way tools such as thumbs, tilt buckets, or rotating couplers.
All 308C assemblies by section
Every catalogued assembly group for the Caterpillar 308C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
205-6806 Air Cleaner Gp
| 09***77 | Valve (Evacuation) | 1 |
| 13***26 | Filter Element As-Air; (Primary) | 1 |
| 13***12 | Cover Assem. | 1 |
190-5839 Drain Gp-Muffler
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***39 | Drain Group-Muffler | 1 |
| 19***00 | Pipe As | 1 |
183-8255 Extension Gp-Exhaust
| 18***55 | Extension Group-Exhaust | 1 |
| 30***12 | Clamp | 1 |
| 31***35 | Pipe-Tail | 1 |
277-2436 Extension Gp-Exhaust
| 15***06 | Clamp | 1 |
| 27***36 | Extension Group-Exhaust | 1 |
| 27***37 | Pipe As-Exhaust | 1 |
249-5350 Lines Gp-Air
| 09***90 | Clamp; (Hose) (26-39mm Id) | 2 |
| 18***50 | Hose | 1 |
| 19***33 | Hose-Air | 1 |
205-6805 Lines Gp-Air
| 19***43 | Hose-Air | 1 |
| 19***33 | Hose-Air | 1 |
| 19***71 | Indicator Group-Air Filter Change | 1 |
139-7790 Manifold Gp-Exhaust
| 09***28 | Washer | 8 |
| 13***90 | Manifold Group-Exhaust | 1 |
| 13***12 | Stud | 2 |
190-5732 Manifold Gp-Inlet
| 09***30 | Bolt (30mm Long); (30 mm Long) | 8 |
| 13***22 | Manifold | 1 |
| 19***32 | Manifold Group-Inlet | 1 |
253-4465 Muffler & Converter
| 25***65 | Muffler & Converter | 1 |
190-5740 Muffler Gp
| 09***68 | Clamp Assem. | 1 |
| 09***00 | U-Bolt | 2 |
| 09***23 | Nut | 8 |
Basic Engine
139-7768 Balancer Gp
| 13***68 | Balancer Group | 1 |
| 13***13 | Bolt; (16-mm Lg) | 2 |
| 13***96 | Bushing | 1 |
190-5724 Camshaft Gp
| 13***15 | Lock | 16 |
| 13***42 | Camshaft Group | 1 |
| 13***88 | Tappet | 8 |
277-2438 Cover Gp-Sound Suppression
| 27***38 | Cover Group-Sound Suppression | 1 |
| 27***39 | Cover | 1 |
| 28***74 | Tape | 1 |
201-3898 Cover Gp-Valve Mechanism
| 09***32 | Plate | 1 |
| 09***08 | Washer | 2 |
| 09***09 | Rubber | 2 |
190-5723 Crankshaft Gp
| 13***04 | Pin | 1 |
| 13***24 | Key | 2 |
| 19***23 | Crankshaft Group | 1 |
212-8638 Cylinder Block Gp
| 08***13 | Pin | 2 |
| 09***30 | Gasket, Oil Pipe | 2 |
| 09***31 | Gasket, Oil Pipe; Gasket, Pipe Ect | 2 |
183-8283 Cylinder Block Gp
| 09***47 | Pin, Dowel | 2 |
| 09***30 | Gasket, Oil Pipe | 2 |
| 09***31 | Gasket, Oil Pipe; Gasket, Pipe Ect | 2 |
183-8282 Cylinder Head Gp
| 09***62 | Cap | 1 |
| 09***66 | Cap (35) | 1 |
| 09***89 | Bolt (40mm Long); (40-mm Long) | 10 |
139-7777 Flywheel Gp
| 09***93 | Bolt (34mm Long) | 7 |
| 13***77 | Flywheel Group | 1 |
| 13***10 | Gear; (34-mm Long) | 1 |
190-5727 Gear Gp-Front
| 09***18 | Bolt (20mm Long); (20 mm Long) | 2 |
| 09***33 | Bolt; (65-mm Long) | 1 |
| 13***02 | Adjuster | 1 |
139-7778 Housing Gp-Flywheel
| 09***99 | Plug-Dust | 1 |
| 13***78 | Housing Group-Flywheel | 1 |
| 13***30 | Pointer | 1 |
201-3899 Housing Gp-Front
| 09***09 | O-Ring, Speed Sensor | 1 |
| 09***16 | Bolt (L=45mm) | 1 |
| 09***75 | Bolt; (25-mm Long) | 1 |
183-8252 Mounting Gp-Engine
| 09***61 | Mount-Flexible | 4 |
| 12***96 | Support As | 3 |
| 12***39 | Bolt; (M10x1.25x25-mm) | 12 |
178-6471 Pan Gp-Oil
| 09***73 | Bolt (12mm Long); (12 mm Long) | 1 |
| 13***92 | Screw; (M6x1x16-mm) | 1 |
| 13***06 | Gasket | 1 |
190-5734 Pan Gp-Oil
| 09***73 | Bolt (12mm Long); (12 mm Long) | 1 |
| 13***92 | Screw; (M6x1x16-mm) | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
190-5725 Piston & Rod Gp
| 13***27 | Ring | 8 |
| 13***35 | Rod As | 4 |
| 13***97 | Bolt | 8 |
201-3902 Pulley Gp
| 16***66 | Pulley | 1 |
| 19***73 | Washer | 1 |
| 19***74 | Bolt | 1 |
217-5553 Pulley Gp
| 15***71 | Pulley | 1 |
| 19***73 | Washer | 1 |
| 19***74 | Bolt | 1 |
190-5733 Pulley Gp-Crankshaft
| 16***66 | Pulley | 1 |
| 19***33 | Pulley Group-Crankshaft | 1 |
| 19***72 | Pulley | 1 |
125-1657 Pulley Gp-Idler
| 12***45 | Pulley As | 1 |
| 12***46 | Cover | 1 |
| 12***57 | Pulley Group-Idler | 1 |
Cooling System
147-7149 Cooler Gp-Engine Oil
| 09***36 | Gasket | 2 |
| 09***23 | Nut | 4 |
| 09***80 | O-Ring, Oil Filter-Oil Cooler | 3 |
208-3303 Cooling Ar
| 20***03 | Cooling Ar | 1 |
| 21***75 | Engine Ar | 1 |
201-3901 Fan Gp-Suction
| 09***54 | Bolt (16mm Long); (16-mm Long) | 4 |
| 09***90 | Bolt (70mm Long) | 4 |
| 19***76 | Fan As | 1 |
201-3900 Lines Gp-Water
| 09***54 | Bolt (16mm Long); (16-mm Long) | 1 |
| 09***57 | Sender-Temperature | 1 |
| 09***38 | Plug | 2 |
190-5729 Pump Gp-Water
| 09***06 | Bolt (80mm Long); (80 mm Long) | 4 |
| 13***26 | Seal | 1 |
| 19***29 | Pump Group-Water | 1 |
204-0921 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***34 | Bolt; (Wing) (M6x1.0x15mm) | 3 |
| 09***35 | Clamp | 2 |
204-1030 Radiator & Hyd Oil Cooler Gp
| 08***07 | Tank As-Coolant; (Recovery) | 1 |
| 08***13 | Tank; (Radiator) | 1 |
| 08***14 | Cap As-Coolant Tank; (Recovery) | 1 |
210-7971 Radiator & Hyd Oil Cooler Gp
| 09***32 | Valve As-Drain | 1 |
| 09***34 | Bolt; (Wing) (M6x1.0x15mm) | 2 |
| 09***35 | Clamp | 2 |
Electrical And Starting System
211-6273 Alarm Ar-Travel
| 16***05 | Lines Group-Pilot | 1 |
| 20***55 | Alarm Group-Travel | 1 |
| 21***73 | Alarm Ar-Travel | 1 |
204-1955 Alarm Gp-Travel
| 11***73 | Connector; (Receptacle) | 1 |
| 11***74 | Terminal; (Male) | 4 |
| 14***66 | Relay; (24-Volt)(Boom Floodlights) | 2 |
139-7850 Alternator Gp-Charging
| 13***17 | Stator | 1 |
| 13***19 | Screw | 1 |
| 13***20 | Screw | 1 |
201-3906 Alternator Gp-Charging
| 09***25 | Nut | 1 |
| 09***89 | Bolt (40mm Long); (40-mm Long) | 1 |
| 13***20 | Nut | 1 |
212-8503 Alternator Gp-Charging
| 09***25 | Nut | 1 |
| 09***89 | Bolt (40mm Long); (40-mm Long) | 1 |
| 13***20 | Nut | 1 |
204-1821 Battery & Wiring Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
138-5190 Control Gp-Engine Electronic -Engine Shutdown
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***90 | Control Group-Engine Electronic; -Engine Shutdown | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
143-1617 Lamp Gp-Flood
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 14***17 | Lamp Group-Flood; -Boom, Lh-Boom, Rh | 1 |
| 6V***92 | Screw-Machine; (M4x0.7x25-mm) | 2 |
186-4615 Lighting Gp-Flood
| 13***84 | Bracket | 1 |
| 14***17 | Lamp Group-Flood; -Boom, Lh-Boom, Rh | 1 |
| 18***15 | Lighting Group-Flood | 1 |
170-9447 Lighting Gp-Flood
| 11***73 | Connector; (Receptacle) | 1 |
| 11***74 | Terminal; (Male) | 4 |
| 11***43 | Harness As; (Cab) | 1 |
143-1616 Lighting Gp-Flood -Chassis
| 14***16 | Lighting Group-Flood; -Chassis | 1 |
| 14***17 | Lamp Group-Flood; -Boom, Lh-Boom, Rh | 1 |
170-9445 Lighting Gp-Flood -Boom Lh
| 13***84 | Bracket | 1 |
| 14***17 | Lamp Group-Flood; -Boom, Lh-Boom, Rh | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
204-1822 Panel Gp-Circuit Breaker
| 08***53 | Switch Group-Magnetic; -Heater Control | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
198-2374 Sensor & Mtg Gp-Position -Boom
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***44 | Sensor As-Position; (Offset Boom) | 1 |
| 19***74 | Sensor & Mtg Group-Position; -Boom | 1 |
123-1516 Sensor & Mtg Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***44 | Sensor As-Position; (Offset Boom) | 1 |
| 12***16 | Sensor & Mtg Group-Position | 1 |
147-7153 Starting Motor Gp-Electric
| 09***11 | Bolt (L=40mm) | 2 |
| 13***41 | Plug; (Glow) | 4 |
| 13***35 | Plate | 1 |
185-9157 Starting Motor Gp-Electric
| 09***50 | Stopper Set | 1 |
| 09***10 | Bearing | 1 |
| 12***40 | Washer As | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
7y-3918 Switch Gp-Heat Start -Key
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 6 |
| 09***92 | Washer, Tooth | 6 |
| 5I***74 | Washer | 1 |
085-5353 Switch Gp-Magnetic
| 08***53 | Switch Group-Magnetic; -Heater Control | 1 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
170-9444 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***35 | Rod As-Antenna | 1 |
213-0518 Wiring Gp-Combined Flow
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 2 |
170-9442 Wiring Gp-Console -Rh
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
| 13***03 | Strap; (Cable) | 2 |
| 17***42 | Wiring Group-Console; -Rh | 1 |
210-9701 Wiring Gp-Console -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 13***05 | Nut-Hex; (M2x0.4-Thd) | 2 |
170-9453 Wiring Gp-Console
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
170-9441 Wiring Gp-Console -Lh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***73 | Connector; (Receptacle) | 1 |
| 11***74 | Terminal; (Male) | 4 |
170-9440 Wiring Gp-Console
| 17***40 | Wiring Group-Console | 1 |
| 17***41 | Wiring Group-Console; -Lh | 1 |
| 17***42 | Wiring Group-Console; -Rh | 1 |
204-1764 Wiring Gp-Console
| 09***61 | Cable | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 1 |
| 10***04 | Screw As; (M5x0.8x10-mm) | 4 |
213-0658 Wiring Gp-Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***18 | Clip | 1 |
249-2614 Wiring Gp-Medium Pressure -Boom
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 2 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
240-2085 Wiring Gp-Overload Warning -Overload Warning
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***37 | Clip | 1 |
| 11***83 | Alarm As; (Quick Coupler) | 1 |
204-1823 Wiring Gp-Quick Coupler
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 20***23 | Wiring Group-Quick Coupler | 1 |
193-3421 Wiring Gp-Radio
| 19***21 | Wiring Group-Radio; (Radio) | 1 |
| 6V***92 | Screw-Machine; (M4x0.7x25-mm) | 8 |
| 7Y***51 | Terminal-Blade; (14-Ga) | 2 |
186-4614 Wiring Gp-Sensor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
Engine Arrangement
217-5475 Engine Ar
| 13***77 | Flywheel Group | 1 |
| 13***78 | Housing Group-Flywheel | 1 |
| 13***90 | Manifold Group-Exhaust | 1 |
205-6803 Engine Ar
| 13***68 | Balancer Group | 1 |
| 13***77 | Flywheel Group | 1 |
| 13***78 | Housing Group-Flywheel | 1 |
212-8637 Engine Ar
| 13***77 | Flywheel Group | 1 |
| 13***78 | Housing Group-Flywheel | 1 |
| 13***90 | Manifold Group-Exhaust | 1 |
205-6802 Engine Ar
| 20***02 | Engine Ar | 1 |
| 20***03 | Engine Ar | 1 |
| 21***37 | Engine Ar | 1 |
205-6804 Installation Ar-Engine
| 18***52 | Mounting Group-Engine | 1 |
| 18***55 | Extension Group-Exhaust | 1 |
| 19***39 | Drain Group-Muffler | 1 |
Frame And Body
208-3327 Box & Mtg Gp-Storage
| 20***27 | Box & Mtg Group-Storage | 1 |
| 20***93 | Sheet As | 1 |
| 22***92 | Bolt As | 1 |
277-1840 Box Gp-Storage -Sound Suppression
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 2 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 8 |
| 19***82 | Cover As | 1 |
169-7661 Counterweight Gp
| 16***61 | Counterweight Group | 1 |
| 18***05 | Counterweight As | 1 |
| 18***07 | Liner | 1 |
169-7660 Counterweight Gp
| 16***60 | Counterweight Group | 1 |
| 21***19 | Liner | 1 |
| 21***80 | Counterweight As | 1 |
302-4050 Counterweight Gp
| 18***88 | Liner | 1 |
| 21***18 | Liner | 1 |
| 21***19 | Liner | 1 |
301-7679 Counterweight Gp
| 18***07 | Liner | 1 |
| 21***18 | Liner | 1 |
| 21***19 | Liner | 1 |
277-1965 Cover As-Sound Suppression
| 20***74 | Seal; (645mm) | 1 |
| 20***75 | Seal; (415mm) | 2 |
| 27***65 | Cover As-Sound Suppression | 1 |
277-1970 Cover As-Sound Suppression
| 24***70 | Cover As | 1 |
| 27***70 | Cover As-Sound Suppression | 1 |
| 27***26 | Insulation | 1 |
236-6792 Cover As-Sound Suppression
| 23***92 | Cover As-Sound Suppression | 1 |
| 23***52 | Insulation | 1 |
| 23***53 | Liner | 1 |
277-1841 Cover Gp-Access
| 18***80 | Seal; (8.8-cm) | 0 |
| 20***64 | Seal | 1 |
| 22***94 | Lock As | 1 |
194-8854 Cover Gp-Hood
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***87 | Rock As | 1 |
| 19***54 | Cover Group-Hood | 1 |
254-4206 Cover Gp-Side
| 08***94 | Shim (2.0mm Thick) | 2 |
| 18***01 | Fender As; (Lh) | 1 |
| 18***80 | Seal; (8.8-cm) | 0 |
277-0344 Cover Gp-Side -Sound Suppression
| 08***94 | Shim (2.0mm Thick) | 2 |
| 18***80 | Seal; (8.8-cm) | 0 |
| 23***99 | Fender As | 1 |
223-4606 Door Gp-Access -Lh
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***87 | Rock As | 1 |
| 19***55 | Cover | 1 |
277-0345 Fender As-Sound Suppression
| 27***45 | Fender As-Sound Suppression | 1 |
| 27***47 | Liner | 1 |
| 27***48 | Liner | 1 |
277-0346 Fender As-Sound Suppression
| 27***46 | Fender As-Sound Suppression | 1 |
| 27***49 | Liner | 1 |
| 27***50 | Liner | 1 |
169-7664 Fender Gp
| 08***94 | Shim (2.0mm Thick) | 2 |
| 16***64 | Fender Group | 1 |
| 18***89 | Fender As; (Rh) | 1 |
186-5724 Frame Gp-Upper
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***97 | Shim (2.0mm Thick) | 2 |
254-7075 Frame Gp-Upper
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***97 | Shim (2.0mm Thick) | 2 |
232-0933 Frame Gp-Upper
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 09***65 | Shim (1.0mm Thick) | 2 |
| 09***97 | Shim (2.0mm Thick) | 2 |
171-9392 Gear & Bearing Gp-Swing
| 09***99 | Pin, Dowel | 1 |
| 09***08 | Packing | 1 |
| 10***62 | Bolt; (M16x2x85-mm) | 67 |
169-7662 Guard Gp-Bottom
| 16***62 | Guard Group-Bottom | 1 |
| 18***09 | Sheet | 1 |
| 18***10 | Sheet | 1 |
127-0081 Guard Gp-Front
| 12***81 | Guard Group-Front | 1 |
| 12***82 | Cover | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
102-3130 Guard Gp-Swivel
| 10***30 | Guard Group-Swivel | 1 |
| 14***63 | Plate As | 1 |
| 14***64 | Plate As | 1 |
169-7658 Handrail Gp
| 13***77 | Bolt As; (M12x1.75x35-mm) | 4 |
| 16***58 | Handrail Group | 1 |
| 18***15 | Handrail | 1 |
304-2991 Hood & Guard Gp
| 09***81 | Pin, Clevis | 2 |
| 10***89 | Shim (2.0mm Thick) | 4 |
| 12***29 | Clip | 1 |
214-8396 Hood & Guard Gp
| 09***81 | Pin, Clevis | 2 |
| 10***89 | Shim (2.0mm Thick) | 4 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 2 |
240-2067 Hood & Guard Gp
| 09***81 | Pin, Clevis | 2 |
| 10***89 | Shim (2.0mm Thick) | 4 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 2 |
237-2932 Hood & Guard Gp
| 12***50 | Plate | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 21***63 | Liner | 1 |
254-4203 Hood & Guard Gp
| 12***50 | Plate | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 25***03 | Hood & Guard Group | 1 |
304-2990 Hood & Guard Gp
| 12***50 | Plate | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 21***63 | Liner | 1 |
301-4808 Hood & Guard Gp
| 09***81 | Pin, Clevis | 2 |
| 10***89 | Shim (2.0mm Thick) | 4 |
| 12***91 | Plate | 1 |
214-8395 Hood & Guard Gp
| 12***50 | Plate | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 4 |
277-5595 Hood & Guard Gp
| 09***81 | Pin, Clevis | 2 |
| 10***89 | Shim (2.0mm Thick) | 4 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 2 |
254-4205 Hood & Guard Gp
| 09***81 | Pin, Clevis | 2 |
| 10***89 | Shim (2.0mm Thick) | 4 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 2 |
277-1953 Hood & Guard Gp
| 12***50 | Plate | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 21***63 | Liner | 1 |
301-2838 Hood & Guard Gp
| 12***50 | Plate | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 21***63 | Liner | 1 |
199-9529 Hood Gp-Engine
| 19***29 | Hood Group-Engine | 1 |
| 22***88 | Sheet As | 1 |
183-1760 Hood Gp-Engine
| 09***17 | Screw-Machine; (M6x1x12-mm)(M6x1x12mm) | 4 |
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 18***60 | Hood Group-Engine | 1 |
277-1960 Hood Gp-Engine
| 09***17 | Screw-Machine; (M6x1x12-mm)(M6x1x12mm) | 4 |
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 19***67 | Liner | 1 |
236-6787 Hood Gp-Engine
| 09***17 | Screw-Machine; (M6x1x12-mm)(M6x1x12mm) | 4 |
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 19***67 | Liner | 1 |
214-8243 Sheet As-Sound Suppression
| 19***24 | Liner | 1 |
| 19***25 | Insulation; (131.2mm) | 1 |
| 19***26 | Insulation; (71mm) | 1 |
277-1967 Sheet As-Sound Suppression
| 27***67 | Sheet As-Sound Suppression | 1 |
| 27***17 | Front Axle; See Fig 02.063, Front Axle, Front Axle; Assembly, Insulation | 1 |
| 27***18 | Insulation | 1 |
277-1968 Sheet As-Sound Suppression
| 22***92 | Sheet As | 1 |
| 27***68 | Sheet As-Sound Suppression | 1 |
| 27***20 | Insulation | 1 |
194-8808 Sheet As-Sound Suppression
| 19***08 | Sheet As-Sound Suppression | 1 |
| 19***11 | Liner; (65mm) | 1 |
| 19***12 | Liner; (133mm) | 1 |
194-8849 Sheet As-Sound Suppression
| 19***49 | Sheet As-Sound Suppression | 1 |
| 19***50 | Liner; (112.3mm) | 1 |
| 19***51 | Liner; (205.8mm) | 1 |
277-1966 Sheet As-Sound Suppression
| 19***35 | Insulation; (160mm) | 1 |
| 19***36 | Insulation; (90mm) | 1 |
| 21***39 | Insulation; (229mm) | 1 |
236-6789 Support As-Enclosure
| 19***48 | Liner | 1 |
| 21***88 | Liner | 1 |
| 23***89 | Support As-Enclosure | 1 |
277-2440 Suppression Ar-Sound
| 27***44 | Cover Group-Side; -Sound Suppression | 1 |
| 27***40 | Box Group-Storage; -Sound Suppression | 1 |
| 27***53 | Hood & Guard Group | 1 |
Fuel System
177-7638 Control Gp-Governor
| 09***26 | Clip | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
132-7764 Control Gp-Governor
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***15 | Seal-Interface | 1 |
| 13***64 | Control Group-Governor | 1 |
201-3904 Filter Gp-Fuel
| 09***26 | Bolt; (M14x1.5x26-mm) | 2 |
| 09***82 | Valve | 1 |
| 09***22 | Packing | 4 |
223-3095 Gauge Gp-Sight -Fuel Level
205-6644 Governor Gp
| 08***30 | Washer | 1 |
| 08***32 | Nut | 1 |
| 08***33 | Washer | 2 |
201-3905 Lines Gp-Fuel
| 08***29 | Clamp | 2 |
| 08***57 | Clamp | 3 |
| 09***30 | Hose | 1 |
208-3276 Lines Gp-Fuel
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***86 | Clamp; (Hose) | 7 |
| 10***79 | Guard; (13-cm) | 0 |
254-7499 Lines Gp-Fuel
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***86 | Clamp; (Hose) | 9 |
| 10***79 | Guard; (13-cm) | 0 |
151-6586 Nozzle Gp-Unit Injector
| 12***79 | Shim (T=1.350mm) | 1 |
| 13***91 | Shim | 1 |
| 13***92 | Shim (T=1.450mm) | 1 |
146-1978 Pump As-Fuel Injection
| 08***38 | Piston | 1 |
| 09***64 | Washer | 4 |
| 09***77 | Housing Assembly. | 1 |
201-3816 Pump Gp-Fuel Injection
| 08***66 | Bolt (L=20mm) | 4 |
| 08***02 | Shim (T=2.0mm) | 1 |
| 08***21 | Washer | 4 |
201-3907 Pump Gp-Fuel Injection
| 09***24 | Nut | 1 |
| 09***73 | Bolt (12mm Long); (12 mm Long) | 1 |
| 09***32 | Bolt (60mm Long); (60-mm Long) | 1 |
169-7665 Tank & Mtg Gp-Fuel
| 08***37 | Shim (2.0mm Thick); (2.0 mm Thick) | 2 |
| 08***38 | Shim (1.0mm Thick); (1.0 mm Thick) | 2 |
| 08***40 | Shim (0.4mm Thick); (0.4 mm Thick) | 2 |
254-4199 Tank & Mtg Gp-Fuel
| 08***37 | Shim (2.0mm Thick); (2.0 mm Thick) | 2 |
| 08***38 | Shim (1.0mm Thick); (1.0 mm Thick) | 2 |
| 08***40 | Shim (0.4mm Thick); (0.4 mm Thick) | 2 |
254-4200 Tank Gp-Fuel
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 08***81 | Cap As; (Fuel Tank)(Fuel Tank) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
169-7666 Tank Gp-Fuel
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 08***81 | Cap As; (Fuel Tank)(Fuel Tank) | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
Hydraulic System
4i-1536 Accumulator Gp-Hydraulic -Charged
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***67 | Cap | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
164-6981 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
194-9987 Barrel Gp-Pump
| 19***87 | Barrel Group-Pump | 1 |
248-9971 Control Ar-Auxiliary -Medium Pressure
| 20***30 | Control & Mtg Group-Joystick | 1 |
| 24***71 | Control Ar-Auxiliary; -Medium Pressure | 1 |
| 24***14 | Wiring Group-Medium Pressure; -Boom | 1 |
200-6633 Control Ar-Auxiliary
| 20***33 | Control Ar-Auxiliary | 1 |
| 20***38 | Lines Group-Front | 1 |
| 20***79 | Film Group; -Shear Control | 1 |
200-6631 Control Ar-Auxiliary
| 15***59 | Control Group-Hydraulic Pedal | 1 |
| 16***97 | Lines Group-Front | 1 |
| 16***98 | Lines Group-Pilot | 1 |
200-6632 Control Ar-Auxiliary
| 15***59 | Control Group-Hydraulic Pedal | 1 |
| 15***60 | Control Group-Hydraulic Pedal | 1 |
| 20***32 | Control Ar-Auxiliary | 1 |
257-9676 Control Ar-Auxiliary
| 15***59 | Control Group-Hydraulic Pedal | 1 |
| 16***98 | Lines Group-Pilot | 1 |
| 20***29 | Film Group | 1 |
210-9693 Control Ar-Coupler
| 20***23 | Wiring Group-Quick Coupler | 1 |
| 21***93 | Control Ar-Coupler | 1 |
| 21***01 | Wiring Group-Console; -Rh | 1 |
102-3747 Coupling Gp-Pump
| 09***88 | Bolt-Special | 3 |
| 09***44 | Coupling | 1 |
| 10***47 | Coupling Group-Pump; -Piston | 1 |
215-9891 Cylinder & Lines Gp-Boom
| 16***95 | Lines Group-Boom Cylinder | 1 |
| 21***91 | Cylinder & Lines Group-Boom | 1 |
| 21***92 | Cylinder & Seal Group-Boom | 1 |
303-0115 Cylinder & Lines Gp-Boom
| 29***08 | Lines Group-Boom Cylinder | 1 |
| 30***15 | Cylinder & Lines Group-Boom | 1 |
| 30***35 | Cylinder & Seal Group-Boom | 1 |
179-9649 Cylinder & Lines Gp-Boom
| 12***09 | Lines Group-Boom Cylinder; -Offset | 1 |
| 17***49 | Cylinder & Lines Group-Boom | 1 |
| 17***50 | Cylinder & Seal Group-Boom | 1 |
235-7859 Cylinder & Lines Gp-Boom
| 12***06 | Lines Group-Stick Cylinder | 1 |
| 23***59 | Cylinder & Lines Group-Boom | 1 |
| 23***61 | Cylinder Group-Boom | 1 |
179-9653 Cylinder & Lines Gp-Boom
| 12***03 | Lines Group-Boom Cylinder | 1 |
| 17***53 | Cylinder & Lines Group-Boom | 1 |
| 17***54 | Cylinder & Seal Group-Boom | 1 |
235-7840 Cylinder & Lines Gp-Boom
| 12***03 | Lines Group-Boom Cylinder | 1 |
| 23***40 | Cylinder & Lines Group-Boom | 1 |
| 23***44 | Cylinder & Seal Group-Boom; -Offset | 1 |
179-9656 Cylinder & Lines Gp-Boom
| 12***06 | Lines Group-Stick Cylinder | 1 |
| 17***56 | Cylinder & Lines Group-Boom | 1 |
| 17***57 | Cylinder Group-Boom | 1 |
235-7832 Cylinder & Lines Gp-Boom
| 12***09 | Lines Group-Boom Cylinder; -Offset | 1 |
| 23***32 | Cylinder & Lines Group-Boom | 1 |
| 23***33 | Cylinder & Seal Group-Boom; -Offset | 1 |
179-9643 Cylinder & Lines Gp-Boom
| 16***95 | Lines Group-Boom Cylinder | 1 |
| 17***43 | Cylinder & Lines Group-Boom | 1 |
| 17***44 | Cylinder & Seal Group-Boom | 1 |
165-9277 Cylinder & Lines Gp-Bucket
| 13***80 | Lines Group-Bucket Cylinder | 1 |
| 16***77 | Cylinder & Lines Group-Bucket | 1 |
| 16***78 | Cylinder & Seal Group-Bucket | 1 |
303-0004 Cylinder & Lines Gp-Bucket
| 30***43 | Lines Group-Bucket Cylinder | 1 |
| 30***04 | Cylinder & Lines Group-Bucket | 1 |
| 30***01 | Cylinder & Seal Group-Bucket | 1 |
204-2716 Cylinder & Lines Gp-Stick
| 20***16 | Cylinder & Lines Group-Stick, Housing-Gear | 1 |
| 20***17 | Cylinder & Seal Group-Stick | 1 |
| 20***70 | Lines Group-Stick Cylinder | 1 |
215-9894 Cylinder & Lines Gp-Stick
| 20***70 | Lines Group-Stick Cylinder | 1 |
| 21***94 | Cylinder & Lines Group-Stick | 1 |
| 21***95 | Cylinder & Seal Group-Stick | 1 |
303-0239 Cylinder & Lines Gp-Stick
| 30***67 | Lines Group-Stick Cylinder | 1 |
| 30***27 | Cylinder & Seal Group-Hydraulic | 1 |
| 30***39 | . Plate, Cylinder & Lines Group-Stick | 1 |
179-9670 Cylinder & Seal Gp-Blade
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 17***70 | Cylinder & Seal Group-Blade | 1 |
| 17***71 | Cylinder Group-Blade | 1 |
235-8255 Cylinder & Seal Gp-Blade
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 23***55 | Cylinder & Seal Group-Blade | 1 |
| 23***56 | Cylinder Group-Blade | 1 |
179-9650 Cylinder & Seal Gp-Boom
| 09***32 | Seal; (Id=54.82mm) | 4 |
| 17***50 | Cylinder & Seal Group-Boom | 1 |
| 17***51 | Cylinder Group-Boom; -Offset | 1 |
179-9644 Cylinder & Seal Gp-Boom
| 09***32 | Seal; (Id=54.82mm) | 2 |
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 2 |
| 17***44 | Cylinder & Seal Group-Boom | 1 |
179-9654 Cylinder & Seal Gp-Boom
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 17***54 | Cylinder & Seal Group-Boom | 1 |
| 17***55 | Cylinder Group-Boom | 1 |
235-7833 Cylinder & Seal Gp-Boom -Offset
| 09***32 | Seal; (Id=54.82mm) | 4 |
| 23***33 | Cylinder & Seal Group-Boom; -Offset | 1 |
| 23***34 | Cylinder Group-Boom; -Offset | 1 |
303-0235 Cylinder & Seal Gp-Boom
| 09***32 | Seal; (Id=54.82mm) | 2 |
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 2 |
| 30***35 | Cylinder & Seal Group-Boom | 1 |
235-7844 Cylinder & Seal Gp-Boom -Offset
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 23***44 | Cylinder & Seal Group-Boom; -Offset | 1 |
| 23***45 | Cylinder Group-Boom | 1 |
215-9892 Cylinder & Seal Gp-Boom
| 09***32 | Seal; (Id=54.82mm) | 2 |
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 2 |
| 21***92 | Cylinder & Seal Group-Boom | 1 |
165-9278 Cylinder & Seal Gp-Bucket
| 09***30 | Seal-Lip Type | 2 |
| 09***32 | Seal; (Id=54.82mm) | 2 |
| 16***78 | Cylinder & Seal Group-Bucket | 1 |
303-0201 Cylinder & Seal Gp-Bucket
| 09***30 | Seal-Lip Type | 2 |
| 09***32 | Seal; (Id=54.82mm) | 2 |
| 30***01 | Cylinder & Seal Group-Bucket | 1 |
303-0227 Cylinder & Seal Gp-Hydraulic
| 09***32 | Seal; (Id=54.82mm) | 4 |
| 30***27 | Cylinder & Seal Group-Hydraulic | 1 |
| 30***10 | Cylinder Group-Stick | 1 |
204-2717 Cylinder & Seal Gp-Stick
| 09***32 | Seal; (Id=54.82mm) | 4 |
| 20***17 | Cylinder & Seal Group-Stick | 1 |
| 20***18 | Cylinder Group-Stick | 1 |
215-9895 Cylinder & Seal Gp-Stick
| 09***32 | Seal; (Id=54.82mm) | 4 |
| 21***95 | Cylinder & Seal Group-Stick | 1 |
| 21***96 | Cylinder Group-Stick | 1 |
179-9671 Cylinder Gp-Blade
| 09***79 | Seal-U-Cup | 1 |
| 09***84 | Seal-Buffer | 1 |
| 09***28 | Seal-O-Ring (Id=109.60mm) | 1 |
235-8256 Cylinder Gp-Blade
| 09***79 | Seal-U-Cup | 1 |
| 09***28 | Seal-O-Ring (Id=109.60mm) | 1 |
| 09***76 | Seal-O-Ring (Id=119.40mm) | 1 |
179-9651 Cylinder Gp-Boom -Offset
| 09***25 | Seal-O-Ring (Id=89.60mm) | 1 |
| 09***00 | Ring | 1 |
| 09***99 | Ring-Back Up; (Backup) | 1 |
235-7845 Cylinder Gp-Boom
| 09***28 | Seal-O-Ring (Id=109.60mm) | 1 |
| 09***76 | Seal-O-Ring (Id=119.40mm) | 1 |
| 09***67 | Ring; (Buck Up) | 1 |
179-9657 Cylinder Gp-Boom
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 17***57 | Cylinder Group-Boom | 1 |
| 17***58 | Cylinder Group-Boom | 1 |
179-9655 Cylinder Gp-Boom
| 09***28 | Seal-O-Ring (Id=109.60mm) | 1 |
| 09***76 | Seal-O-Ring (Id=119.40mm) | 1 |
| 09***67 | Ring; (Buck Up) | 1 |
235-7861 Cylinder Gp-Boom
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
| 23***61 | Cylinder Group-Boom | 1 |
| 23***62 | Cylinder Group-Boom | 1 |
179-9658 Cylinder Gp-Boom
| 09***77 | Packing, Rod | 1 |
| 09***19 | Ring, Back-Up | 1 |
| 09***24 | Ring-Retaining | 2 |
304-4900 Cylinder Gp-Boom
| 09***27 | Seal-O-Ring (Id=99.60mm) | 2 |
| 09***74 | Seal-O-Ring (Id=109.40mm) | 1 |
| 09***67 | Ring; (Buck Up) | 1 |
235-7862 Cylinder Gp-Boom
| 09***19 | Ring, Back-Up | 1 |
| 09***24 | Ring-Retaining | 2 |
| 09***13 | Seal-O-Ring; (Id=94.40mm) | 1 |
215-9893 Cylinder Gp-Boom
| 09***27 | Seal-O-Ring (Id=99.60mm) | 2 |
| 09***74 | Seal-O-Ring (Id=109.40mm) | 1 |
| 09***67 | Ring; (Buck Up) | 1 |
235-7834 Cylinder Gp-Boom -Offset
| 09***25 | Seal-O-Ring (Id=89.60mm) | 1 |
| 09***00 | Ring | 1 |
| 09***99 | Ring-Back Up; (Backup) | 1 |
179-9645 Cylinder Gp-Boom
| 09***03 | Ring, Wear | 1 |
| 09***27 | Seal-O-Ring (Id=99.60mm) | 2 |
| 09***74 | Seal-O-Ring (Id=109.40mm) | 1 |
165-9279 Cylinder Gp-Bucket
| 09***10 | Seal-O-Ring (Id=79.40mm) | 1 |
| 09***98 | Seal Assem. | 1 |
| 09***99 | Ring; (Buck Up) | 1 |
304-4908 Cylinder Gp-Bucket
| 09***10 | Seal-O-Ring (Id=79.40mm) | 1 |
| 09***98 | Seal Assem. | 1 |
| 09***99 | Ring; (Buck Up) | 1 |
204-2718 Cylinder Gp-Stick
| 08***90 | Head | 1 |
| 09***75 | Seal; (Id=56.70mm) | 1 |
| 09***18 | Ring-Back Up | 1 |
304-4910 Cylinder Gp-Stick
| 08***90 | Head | 1 |
| 09***75 | Seal; (Id=56.70mm) | 1 |
| 09***18 | Ring-Back Up | 1 |
215-9896 Cylinder Gp-Stick
| 08***90 | Head | 1 |
| 09***75 | Seal; (Id=56.70mm) | 1 |
| 09***18 | Ring-Back Up | 1 |
171-9316 Drive Gp-Swing
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
| 10***26 | Breather As; (Swing Drive) | 1 |
| 10***27 | Pipe Assem. | 1 |
199-4585 Drive Gp-Swing
| 09***75 | Seal - O-Ring (7.80 mm Id) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
171-9317 Fastener Gp-Swing & Final Dr
| 08***08 | Washer; (16.6x32x5-mm Thk) | 6 |
| 08***09 | Spacer; (16.6x32x8.5-mm Thk) | 4 |
| 09***76 | Pin, Dowel | 2 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***57 | Pipe | 1 |
194-9842 Head Gp-Pump
| 13***15 | Plug | 9 |
| 19***42 | Head Group-Pump | 1 |
194-9981 Housing Gp-Pump
| 19***81 | Housing Group-Pump | 1 |
| 27***42 | Swashplate Group | 1 |
185-0500 Hydraulic Ar
| 16***59 | Pump & Mtg Group-Hydraulic | 1 |
| 16***71 | Lines Group-Travel Motor | 1 |
| 16***73 | Lines Group-Swing Motor | 1 |
214-1231 Lever Gp-Control -Hydraulic Lockout
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
173-8041 Lines Ar-Auxiliary Hydraulic
| 17***41 | Lines Ar-Auxiliary Hydraulic | 1 |
| 17***42 | Lines Group-Auxiliary Hydraulic | 1 |
| 17***43 | Stick Group | 1 |
278-4071 Lines Ar-Auxiliary Hydraulic -Long Stick
| 23***04 | Stick Group | 1 |
| 27***71 | Lines Ar-Auxiliary Hydraulic; -Long Stick | 1 |
| 27***72 | Lines Group-Auxiliary Hydraulic | 1 |
251-8498 Lines Ar-Auxiliary Hydraulic
| 23***22 | Boom Group | 1 |
| 24***40 | Lines Group-Auxiliary Hydraulic; -Medium Pressure | 1 |
| 25***98 | Lines Ar-Auxiliary Hydraulic | 1 |
248-6450 Lines Ar-Auxiliary Hydraulic -Medium Pressure
| 23***25 | Stick Group; -Auxiliary, Quick Coupler | 1 |
| 24***50 | Lines Ar-Auxiliary Hydraulic; -Medium Pressure | 1 |
| 24***06 | Lines Group-Auxiliary Hydraulic; -Medium Pressure | 1 |
173-8038 Lines Ar-Auxiliary Hydraulic
| 17***38 | Lines Ar-Auxiliary Hydraulic | 1 |
| 17***39 | Lines Group-Auxiliary Hydraulic | 1 |
| 17***40 | Stick Group | 1 |
249-3003 Lines Ar-Auxiliary Hydraulic -Medium Pressure
| 23***25 | Stick Group; -Auxiliary, Quick Coupler | 1 |
| 24***03 | Lines Ar-Auxiliary Hydraulic; -Medium Pressure | 1 |
| 24***06 | Lines Group-Auxiliary Hydraulic; -Medium Pressure | 1 |
248-6451 Lines Ar-Auxiliary Hydraulic -Medium Pressure
| 23***34 | Stick Group; -Coupler | 1 |
| 24***51 | Lines Ar-Auxiliary Hydraulic; -Medium Pressure | 1 |
| 24***90 | Lines Group-Auxiliary Hydraulic; -Medium Pressure | 1 |
249-3007 Lines Ar-Auxiliary Hydraulic -Medium Pressure
| 23***34 | Stick Group; -Coupler | 1 |
| 24***07 | Lines Ar-Auxiliary Hydraulic; -Medium Pressure | 1 |
| 24***90 | Lines Group-Auxiliary Hydraulic; -Medium Pressure | 1 |
187-9899 Lines Ar-Auxiliary Hydraulic
| 18***99 | Lines Ar-Auxiliary Hydraulic | 1 |
| 18***00 | Lines Group-Auxiliary Hydraulic | 1 |
| 18***01 | Boom Group | 1 |
278-4061 Lines Ar-Auxiliary Hydraulic
| 23***02 | Stick Group | 1 |
| 27***61 | Lines Ar-Auxiliary Hydraulic | 1 |
| 27***62 | Lines Group-Auxiliary Hydraulic | 1 |
187-9898 Lines Gp-Auxiliary Hydraulic -1-Pump/2-Pump, 1-Way/2-Way Flow
| 09***91 | Clamp, Single | 3 |
| 12***17 | Hose As | 1 |
| 18***95 | Valve Group-Check; (1-Way/2-Way Flow) | 1 |
278-4062 Lines Gp-Auxiliary Hydraulic
| 09***91 | Clamp, Single | 6 |
| 09***86 | Bolt; (M12x1.75x55-mm) | 2 |
| 27***62 | Lines Group-Auxiliary Hydraulic | 1 |
173-8039 Lines Gp-Auxiliary Hydraulic
| 09***91 | Clamp, Single | 4 |
| 13***83 | Bolt-Socket Head; (M8x1.25x35-mm) | 4 |
| 17***39 | Lines Group-Auxiliary Hydraulic | 1 |
249-4840 Lines Gp-Auxiliary Hydraulic -Medium Pressure
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 2 |
| 09***90 | Clamp, Single | 4 |
| 09***94 | Clamp, Double | 1 |
187-9900 Lines Gp-Auxiliary Hydraulic
| 09***91 | Clamp, Single | 7 |
| 09***94 | Clamp, Double | 1 |
| 09***99 | Clamp | 2 |
278-4072 Lines Gp-Auxiliary Hydraulic
| 09***91 | Clamp, Single | 6 |
| 09***86 | Bolt; (M12x1.75x55-mm) | 2 |
| 27***65 | Support As; (Lh) | 1 |
249-3006 Lines Gp-Auxiliary Hydraulic -Medium Pressure
| 09***86 | Bolt; (M12x1.75x55-mm) | 2 |
| 17***69 | Plate | 2 |
| 24***06 | Lines Group-Auxiliary Hydraulic; -Medium Pressure | 1 |
173-8042 Lines Gp-Auxiliary Hydraulic
| 09***91 | Clamp, Single | 4 |
| 13***83 | Bolt-Socket Head; (M8x1.25x35-mm) | 4 |
| 17***42 | Lines Group-Auxiliary Hydraulic | 1 |
249-4790 Lines Gp-Auxiliary Hydraulic -Medium Pressure
| 09***86 | Bolt; (M12x1.75x55-mm) | 2 |
| 17***69 | Plate | 2 |
| 24***90 | Lines Group-Auxiliary Hydraulic; -Medium Pressure | 1 |
204-4574 Lines Gp-Boom -Stick Lowering
| 09***94 | Clamp, Double | 1 |
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 2 |
| 14***52 | Union As | 2 |
169-7691 Lines Gp-Boom
| 09***91 | Clamp, Single | 4 |
| 09***94 | Clamp, Double | 2 |
| 09***66 | Clamp | 2 |
123-1510 Lines Gp-Boom
| 12***10 | Lines Group-Boom | 1 |
| 12***17 | Hose As | 2 |
| 12***19 | Hose As | 2 |
253-6822 Lines Gp-Boom
| 09***91 | Clamp, Single | 4 |
| 09***94 | Clamp, Double | 2 |
| 09***66 | Clamp | 2 |
123-1509 Lines Gp-Boom Cylinder -Offset
| 09***66 | Clamp | 1 |
| 12***09 | Lines Group-Boom Cylinder; -Offset | 1 |
| 12***83 | Support As | 1 |
295-9308 Lines Gp-Boom Cylinder
| 29***08 | Lines Group-Boom Cylinder | 1 |
| 29***88 | Tube As | 1 |
| 29***89 | Support As | 2 |
123-1503 Lines Gp-Boom Cylinder
| 09***91 | Clamp, Single | 2 |
| 12***03 | Lines Group-Boom Cylinder | 1 |
| 12***88 | Tube As | 1 |
297-6599 Lines Gp-Boom Cylinder
| 14***14 | Switch Group-Pressure; (Boom Lowering Safety Switch) | 1 |
| 14***29 | Harness As-Switch; (Boom Lower)(Overload Warning) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
162-4795 Lines Gp-Boom Cylinder
| 09***91 | Clamp, Single | 2 |
| 10***00 | Pipe As | 1 |
| 13***09 | Support As | 2 |
301-7543 Lines Gp-Bucket Cylinder
| 29***90 | Clamp | 1 |
| 29***98 | Elbow | 1 |
| 30***29 | Support As | 1 |
131-9980 Lines Gp-Bucket Cylinder
| 09***91 | Clamp, Single | 1 |
| 10***23 | Elbow | 1 |
| 10***82 | Pipe As | 1 |
177-8654 Lines Gp-Coupler -Reach Stick
| 09***86 | Bolt; (M12x1.75x55-mm) | 2 |
| 13***80 | Clip | 2 |
| 17***54 | Lines Group-Coupler; -Reach Stick | 1 |
177-8666 Lines Gp-Coupler -Reach
| 09***86 | Bolt; (M12x1.75x55-mm) | 2 |
| 13***80 | Clip | 2 |
| 17***66 | Lines Group-Coupler; -Reach | 1 |
210-9694 Lines Gp-Coupler
| 09***90 | Clamp, Single | 4 |
| 09***94 | Clamp, Double | 1 |
| 19***66 | Spacer As | 2 |
251-4421 Lines Gp-Coupler
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 2 |
| 09***90 | Clamp, Single | 4 |
| 09***94 | Clamp, Double | 5 |
169-7672 Lines Gp-Cylinder -Blade
| 08***56 | 90 Degrees Elbow | 1 |
| 09***63 | Grommet | 2 |
| 12***21 | Block | 1 |
211-6197 Lines Gp-Front -Quick Coupler
| 10***35 | Hose As | 1 |
| 11***18 | Clip | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
169-7675 Lines Gp-Front
| 09***84 | Locknut; (M12x1.75-Thd) | 4 |
| 10***81 | Hose As | 1 |
| 11***78 | Tee-O-Ring | 1 |
169-7697 Lines Gp-Front
| 09***99 | Clamp | 1 |
| 12***03 | Connector | 1 |
| 14***27 | Valve Group-Relief; (Line)(Work Tool) | 2 |
202-1637 Lines Gp-Front
| 09***99 | Clamp | 1 |
| 14***27 | Valve Group-Relief; (Line)(Work Tool) | 1 |
| 18***27 | Hose As | 1 |
240-8374 Lines Gp-Front -Boom Lowering
| 10***85 | Hose As (Nom 06, L=3000mm); (Nom 06, L=30000mm) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
240-8375 Lines Gp-Front -Stick Lowering
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
| 24***75 | Lines Group-Front; -Stick Lowering | 1 |
202-1638 Lines Gp-Front
| 12***03 | Connector | 1 |
| 14***27 | Valve Group-Relief; (Line)(Work Tool) | 2 |
| 18***23 | Hose As | 1 |
249-4838 Lines Gp-Front -Medium Pressure
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 15***41 | Elbow As. | 1 |
| 24***48 | Valve Group-Control; -Blade, Medium Pressure | 1 |
208-3258 Lines Gp-Pilot -2 Ways
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 5 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 9 |
169-7698 Lines Gp-Pilot
| 08***67 | Hose As (Nom 06, L=700mm) | 1 |
| 08***71 | Hose As (Nom 06, L=960mm) | 1 |
| 10***31 | Connector-Filter | 1 |
169-7680 Lines Gp-Pilot
| 08***56 | 90 Degrees Elbow | 1 |
| 08***02 | Hose As. | 1 |
| 08***32 | Hose As (Nom 06, L=900mm) | 2 |
169-7699 Lines Gp-Pilot
| 08***03 | Hose As (Nom 06, L=2300mm) | 1 |
| 08***85 | Hose As (Nom 06, L=350mm) | 1 |
| 10***73 | Hose As (Nom 06, L=1700mm) | 1 |
169-7682 Lines Gp-Pilot
| 08***77 | Hose As (Nom 06, L=1600mm) | 1 |
| 08***82 | Hose As (Nom 06, L=400mm) | 1 |
| 11***52 | Hose As | 1 |
169-7701 Lines Gp-Pilot
| 08***11 | Hose As (Nom 06, L=450mm) | 2 |
| 10***31 | Connector-Filter | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
211-6240 Lines Gp-Pilot
| 08***67 | Hose As (Nom 06, L=700mm) | 2 |
| 10***31 | Connector-Filter | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
249-4839 Lines Gp-Pilot -Medium Pressure
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***39 | Tee As | 1 |
| 15***36 | Elbow As. | 2 |
202-1641 Lines Gp-Pilot
| 08***67 | Hose As (Nom 06, L=700mm) | 1 |
| 08***85 | Hose As (Nom 06, L=350mm) | 1 |
| 11***19 | Valve Group-Pilot; -1-Pump, 2-Pump, Boom Priority | 1 |
169-7705 Lines Gp-Pilot
| 10***79 | Switch As-Pressure; (Implement/Swing & Travel) | 1 |
| 14***16 | Connector Group | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
202-1640 Lines Gp-Pilot
| 08***67 | Hose As (Nom 06, L=700mm) | 1 |
| 08***71 | Hose As (Nom 06, L=960mm) | 1 |
| 08***77 | Hose As (Nom 06, L=1600mm) | 1 |
202-1639 Lines Gp-Pump
| 14***82 | Elbow As | 2 |
| 14***93 | Elbow Group | 1 |
| 16***97 | Valve Group-Check; -1-Pump/2-Pump Flow | 1 |
169-7678 Lines Gp-Pump
| 13***07 | Strap; (Cable) | 3 |
| 14***82 | Elbow As | 1 |
| 14***90 | Elbow Group | 2 |
169-7676 Lines Gp-Return & Filter
| 13***40 | Sleeve-Hose; (110-cm Each) | 0 |
| 14***33 | Connector As | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
131-9979 Lines Gp-Stick
| 13***79 | Lines Group-Stick | 1 |
| 15***61 | Hose Assem. | 2 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 2 |
142-1065 Lines Gp-Stick
| 10***28 | Hose As | 2 |
| 14***65 | Lines Group-Stick | 1 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 2 |
301-7578 Lines Gp-Stick Cylinder -Stick Lowering Control
| 14***25 | Connector As. | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***68 | Elbow Group | 1 |
204-4575 Lines Gp-Stick Cylinder -Stick Lowering Control
| 09***91 | Clamp, Single | 2 |
| 09***94 | Clamp, Double | 2 |
| 13***13 | Support As | 2 |
204-8170 Lines Gp-Stick Cylinder
| 09***91 | Clamp, Single | 1 |
| 13***12 | Support As | 1 |
| 13***13 | Support As | 1 |
123-1506 Lines Gp-Stick Cylinder
| 09***91 | Clamp, Single | 2 |
| 12***06 | Lines Group-Stick Cylinder | 1 |
| 12***85 | Support As | 1 |
301-7567 Lines Gp-Stick Cylinder
| 29***90 | Clamp | 1 |
| 29***92 | Elbow | 1 |
| 30***23 | Support As | 1 |
169-7673 Lines Gp-Swing Motor
| 10***54 | Connector-Orfs | 1 |
| 14***45 | Connector As | 3 |
| 16***73 | Lines Group-Swing Motor | 1 |
169-7671 Lines Gp-Travel Motor
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 09***94 | Clamp, Double | 2 |
| 13***50 | Stopper | 1 |
204-2748 Motor Gp-Swing
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***32 | Seal; (Id=129.60mm) | 1 |
169-7703 Mounting Gp-Valve
| 16***03 | Mounting Group-Valve | 1 |
| 28***75 | Support As | 1 |
| 8T***84 | Capscrew; (Hex Hd) (M12 X 1.75 X 45l Gr 10.9) | 4 |
162-6259 Pump & Mtg Gp-Hydraulic
| 10***47 | Coupling Group-Pump; -Piston | 1 |
| 12***56 | Cover | 1 |
| 16***59 | Pump & Mtg Group-Hydraulic | 1 |
183-8243 Pump & Mtg Gp-Hydraulic
| 10***47 | Coupling Group-Pump; -Piston | 1 |
| 12***56 | Cover | 1 |
| 16***70 | Pump Group-Piston & Gear | 1 |
107-6916 Pump Gp-Gear
| 08***52 | Frame | 1 |
| 08***55 | Gear-Pump | 1 |
| 08***56 | Gear | 1 |
188-4119 Pump Gp-Gear
| 10***16 | Pump Group-Gear | 1 |
| 18***19 | Pump Group-Gear | 1 |
| 18***20 | Pump Group-Gear | 1 |
188-4120 Pump Gp-Gear
| 08***88 | Plate | 1 |
| 08***91 | Ring; (Square) | 2 |
| 08***92 | Bushing | 4 |
303-1420 Pump Gp-Gear
| 08***56 | Gear | 1 |
| 08***57 | Ring-Back Up | 1 |
| 08***58 | Ring-Square | 1 |
303-1424 Pump Gp-Gear
| 08***91 | Ring; (Square) | 2 |
| 08***93 | Plate-Thrust | 2 |
| 08***94 | Plate-Thrust | 2 |
303-0289 Pump Gp-Gear
| 08***56 | Gear | 1 |
| 08***57 | Ring-Back Up | 1 |
| 08***58 | Ring-Square | 1 |
165-9269 Pump Gp-Piston & Gear
| 08***64 | Plug | 2 |
| 08***84 | Plug | 1 |
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 1 |
165-9270 Pump Gp-Piston & Gear
| 08***64 | Plug | 2 |
| 08***84 | Plug | 1 |
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 1 |
183-1526 Screen Gp-Hydraulic
| 09***39 | Spring | 1 |
| 09***80 | Seal-O-Ring (Id=59.69mm) | 1 |
| 09***75 | Screen As; (Hydraulic) | 1 |
274-5942 Swashplate Gp
| 10***62 | Swashplate | 1 |
| 10***63 | Cover | 1 |
| 10***64 | Collar | 1 |
225-4367 Swivel Gp
| 09***23 | Seal-O-Ring (Id=79.60mm) | 2 |
| 09***14 | Seal-O-Ring (Id=99.40mm) | 1 |
| 16***94 | Seal-Ring | 7 |
224-8201 Swivel Gp
| 09***22 | Seal-O-Ring (Id=69.60mm) | 2 |
| 09***12 | Seal-O-Ring (Id=89.40mm) | 1 |
| 09***88 | Retainer | 1 |
162-4902 Swivel Gp
| 09***66 | Plug, Tapered | 3 |
| 09***67 | Plug, Tapered | 4 |
| 09***23 | Seal-O-Ring (Id=79.60mm) | 1 |
240-2078 Tank & Filter Gp-Hydraulic
| 09***70 | Valve As; (Bypass) | 1 |
| 09***23 | Seal-O-Ring (Id=144.40mm) | 1 |
| 09***25 | Seal-O-Ring (Id=154.30mm) | 1 |
240-2077 Tank & Mtg Gp-Hydraulic
| 17***87 | Spacer; (17x35x56.5-mm Thk) | 4 |
| 24***77 | Tank & Mtg Group-Hydraulic | 1 |
| 24***78 | Tank & Filter Group-Hydraulic | 1 |
206-3265 Valve Ar-Alt Pattern Control
| 20***65 | Valve Ar-Alt Pattern Control | 1 |
| 20***58 | Lines Group-Pilot; -2 Ways | 1 |
| 20***59 | Film Group | 1 |
239-8574 Valve Ar-Load Control -Boom Lowering
| 23***74 | Valve Ar-Load Control; -Boom Lowering | 1 |
| 24***85 | Wiring Group-Overload Warning; -Overload Warning | 1 |
| 24***74 | Lines Group-Front; -Boom Lowering | 1 |
239-8575 Valve Ar-Load Control -Stick Lowering
| 20***74 | Lines Group-Boom; -Stick Lowering | 1 |
| 20***75 | Lines Group-Stick Cylinder; -Stick Lowering Control | 1 |
| 23***75 | Valve Ar-Load Control; -Stick Lowering | 1 |
173-8093 Valve As-Manual -Auxiliary Hydraulic
| 13***13 | Handle | 1 |
| 13***14 | Bolt; (M5x0.8x10mm) | 1 |
| 13***15 | Plate | 1 |
185-0515 Valve Gp-Bypass
| 18***57 | Ring | 1 |
| 18***58 | Ring | 1 |
| 18***59 | Valve As | 1 |
165-9597 Valve Gp-Check
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 2 |
| 10***68 | Valve | 1 |
| 10***69 | Spring | 1 |
185-0428 Valve Gp-Control
| 09***93 | Rod | 1 |
| 09***94 | Rod | 2 |
| 09***36 | Nut | 4 |
248-7948 Valve Gp-Control -Blade, Medium Pressure
| 09***28 | Seal-O-Ring | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***24 | Valve Group-Relief | 1 |
185-0429 Valve Gp-Control
| 09***22 | Poppet | 1 |
| 09***23 | Spring | 1 |
| 09***34 | Adapter | 1 |
225-4657 Valve Gp-Load Control -Stick
| 09***73 | Seal-O-Ring (Id=5.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 3 |
| 09***89 | Seal-O-Ring; (21.70mm Id) | 1 |
298-3374 Valve Gp-Load Control -Stick Cylinder
| 09***84 | Seal-O-Ring (Id=15.80mm) | 3 |
| 09***89 | Seal-O-Ring; (21.70mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
254-7108 Valve Gp-Load Control -Stick Cylinder
| 09***73 | Seal-O-Ring (Id=5.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 3 |
| 09***89 | Seal-O-Ring; (21.70mm Id) | 1 |
190-7717 Valve Gp-Main Control
| 09***28 | Seal-O-Ring | 1 |
| 09***15 | Spring | 8 |
| 09***28 | Seal-O-Ring (Id=25.70mm) | 20 |
316-2154 Valve Gp-Main Control
| 09***28 | Seal-O-Ring | 1 |
| 09***15 | Spring | 8 |
| 09***28 | Seal-O-Ring (Id=25.70mm) | 20 |
171-0047 Valve Gp-Pilot
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
206-3266 Valve Gp-Pilot
| 00***03 | Ball | 1 |
| 08***81 | Needle | 4 |
| 09***65 | Plug, Tapered | 7 |
206-3305 Valve Gp-Pilot -Joystick
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
119-5219 Valve Gp-Pilot
| 09***75 | Spring | 1 |
| 09***76 | Guide, Spring | 1 |
| 11***19 | Valve Group-Pilot; -1-Pump, 2-Pump, Boom Priority | 1 |
165-9569 Valve Gp-Pilot -Joystick
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
326-1813 Valve Gp-Pilot
| 09***84 | Seal-O-Ring (Id=15.80mm) | 3 |
| 09***89 | Seal-O-Ring; (21.70mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
165-9522 Valve Gp-Pilot -Travel
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
206-3220 Valve Gp-Pilot
| 09***73 | Seal-O-Ring (Id=5.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 3 |
| 09***89 | Seal-O-Ring; (21.70mm Id) | 1 |
190-7694 Valve Gp-Pilot
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 2 |
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 2 |
326-1814 Valve Gp-Pilot
| 09***84 | Seal-O-Ring (Id=15.80mm) | 3 |
| 09***89 | Seal-O-Ring; (21.70mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
158-8266 Valve Gp-Pilot Manifold
| 09***19 | Seal-O-Ring (Id=15.80mm) | 2 |
| 09***98 | Spring, Check | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 4 |
190-7769 Valve Gp-Pressure Reducing
| 09***22 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***65 | Spring | 2 |
229-1082 Valve Gp-Selector -Alt Pattern Control, 2-Way
| 00***03 | Ball | 1 |
| 08***81 | Needle | 4 |
| 09***65 | Plug, Tapered | 7 |
121-1491 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
190-7820 Valve Gp-Solenoid
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 2 |
| 19***20 | Valve Group-Solenoid; -Auxiliary-Blade | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 4 |
152-8346 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***36 | Kit-Seal; (Solenoid Valve) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
Implements
169-7641 Boom Ar
| 12***10 | Lines Group-Boom | 1 |
| 12***16 | Sensor & Mtg Group-Position | 1 |
| 12***81 | Guard Group-Front | 1 |
210-9753 Boom Ar
| 18***01 | Boom Group | 1 |
| 21***94 | Lines Group-Coupler | 1 |
| 21***53 | Boom Ar | 1 |
169-7644 Boom Ar-1 Piece Long
| 10***35 | Lines Group-Grease | 1 |
| 16***44 | Boom Ar-1 Piece Long | 1 |
| 16***91 | Lines Group-Boom | 1 |
187-9901 Boom Gp
| 08***97 | Washer; (13x50x6-mm Thk) | 1 |
| 09***64 | Shim (1.0mm Thick) | 1 |
| 09***65 | Shim (1.0mm Thick) | 1 |
235-3814 Boom Gp
| 08***97 | Washer; (13x50x6-mm Thk) | 1 |
| 09***64 | Shim (1.0mm Thick) | 1 |
| 09***65 | Shim (1.0mm Thick) | 1 |
218-5320 Boom Gp
| 08***97 | Washer; (13x50x6-mm Thk) | 1 |
| 09***65 | Shim (1.0mm Thick) | 1 |
| 11***97 | Pin | 1 |
186-5691 Boom Gp
| 08***97 | Washer; (13x50x6-mm Thk) | 1 |
| 09***64 | Shim (1.0mm Thick) | 1 |
| 09***65 | Shim (1.0mm Thick) | 1 |
235-3822 Boom Gp
| 08***97 | Washer; (13x50x6-mm Thk) | 1 |
| 09***64 | Shim (1.0mm Thick) | 1 |
| 09***65 | Shim (1.0mm Thick) | 1 |
235-3835 Boom Gp-Offset
| 08***97 | Washer; (13x50x6-mm Thk) | 9 |
| 08***98 | Washer; (19x60x9-mm Thk) | 1 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
235-3839 Boom Gp-Offset
| 16***92 | Seal-Lip Type | 2 |
| 23***39 | Boom Group-Offset | 1 |
| 23***40 | Boom & Bearing As | 1 |
201-2930 Boom Gp-Offset -Lower
| 16***92 | Seal-Lip Type | 2 |
| 20***30 | Boom Group-Offset; -Lower | 1 |
| 23***40 | Boom & Bearing As | 1 |
201-2926 Boom Gp-Offset -Upper
| 09***82 | Seal, Dust | 4 |
| 20***26 | Boom Group-Offset; -Upper | 1 |
| 20***27 | Boom & Bearing As | 1 |
274-7117 Boom Gp-Offset -Upper
| 09***82 | Seal, Dust | 4 |
| 23***13 | Bearing-Sleeve | 4 |
| 27***17 | Boom Group-Offset; -Upper | 1 |
198-5712 Boom Gp-Offset
| 08***97 | Washer; (13x50x6-mm Thk) | 9 |
| 08***98 | Washer; (19x60x9-mm Thk) | 1 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
223-2671 Guard Gp-Cylinder -Boom
| 17***96 | Tube | 2 |
| 22***71 | Guard Group-Cylinder; -Boom | 1 |
| 23***65 | Guide | 1 |
277-8613 Guard Gp-Cylinder -Boom Lowering Control Valve
| 13***10 | Support As | 1 |
| 27***54 | Support As | 1 |
| 27***13 | Guard Group-Cylinder; -Boom Lowering Control Valve | 1 |
303-9174 Guard Gp-Cylinder
| 29***00 | Support As | 1 |
| 30***72 | Support As | 1 |
| 30***74 | Guard Group-Cylinder | 1 |
188-4222 Guard Gp-Cylinder
| 18***22 | Guard Group-Cylinder | 1 |
| 18***23 | Guard | 1 |
| 8T***92 | Capscrew; (Hex Hd) (M12 X 1.75 X 25, Gr10.9, Z) | 3 |
102-3135 Lines Gp-Grease
| 10***35 | Lines Group-Grease | 1 |
| 11***97 | Hose Assem. | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
139-3052 Linkage Ar-Bucket
| 13***52 | Linkage Ar-Bucket | 1 |
| 16***77 | Cylinder & Lines Group-Bucket | 1 |
| 16***66 | Linkage Group-Bucket | 1 |
166-1666 Linkage Gp-Bucket
| 09***41 | Seal-O-Ring (Id=80.00mm) | 4 |
| 09***30 | Seal-Lip Type | 2 |
| 09***32 | Seal; (Id=54.82mm) | 4 |
235-3872 Linkage Gp-Bucket
| 09***64 | Shim (1.0mm Thick) | 4 |
| 09***41 | Seal-O-Ring (Id=80.00mm) | 4 |
| 09***32 | Seal; (Id=54.82mm) | 4 |
177-8650 Stick Ar
| 17***50 | Stick Ar | 1 |
| 17***51 | Stick Group; -Coupler | 1 |
| 17***54 | Lines Group-Coupler; -Reach Stick | 1 |
177-8662 Stick Ar
| 17***62 | Stick Ar | 1 |
| 17***63 | Stick Group; -Coupler | 1 |
| 17***66 | Lines Group-Coupler; -Reach | 1 |
139-3050 Stick Ar-Hoe
| 13***79 | Lines Group-Stick | 1 |
| 13***50 | Stick Ar-Hoe | 1 |
| 16***61 | Stick Group-Hoe | 1 |
139-3049 Stick Ar-Hoe
| 13***49 | Stick Ar-Hoe | 1 |
| 14***65 | Lines Group-Stick | 1 |
| 16***58 | Stick Group-Hoe | 1 |
177-8663 Stick Gp -Coupler
| 09***30 | Seal-Lip Type | 4 |
| 16***92 | Seal-Lip Type | 2 |
| 16***76 | Bearing-Sleeve | 2 |
235-3802 Stick Gp
| 09***30 | Seal-Lip Type | 2 |
| 16***92 | Seal-Lip Type | 2 |
| 16***88 | Shim; (2-mm Thk) | 2 |
173-8043 Stick Gp
| 09***30 | Seal-Lip Type | 4 |
| 16***92 | Seal-Lip Type | 2 |
| 16***76 | Bearing-Sleeve | 2 |
173-8040 Stick Gp
| 09***30 | Seal-Lip Type | 4 |
| 16***92 | Seal-Lip Type | 2 |
| 16***76 | Bearing-Sleeve | 2 |
235-3804 Stick Gp
| 09***30 | Seal-Lip Type | 2 |
| 16***92 | Seal-Lip Type | 2 |
| 16***88 | Shim; (2-mm Thk) | 2 |
236-4825 Stick Gp -Auxiliary, Quick Coupler
| 09***30 | Seal-Lip Type | 2 |
| 16***92 | Seal-Lip Type | 2 |
| 16***88 | Shim; (2-mm Thk) | 0 |
177-8651 Stick Gp -Coupler
| 09***30 | Seal-Lip Type | 4 |
| 16***92 | Seal-Lip Type | 2 |
| 16***76 | Bearing-Sleeve | 2 |
235-3834 Stick Gp -Coupler
| 09***30 | Seal-Lip Type | 2 |
| 16***92 | Seal-Lip Type | 2 |
| 16***62 | Stick & Bearing As | 1 |
235-3785 Stick Gp-Hoe
| 09***30 | Seal-Lip Type | 2 |
| 16***92 | Seal-Lip Type | 2 |
| 16***80 | Bearing-Sleeve | 4 |
166-1658 Stick Gp-Hoe
| 09***30 | Seal-Lip Type | 4 |
| 16***92 | Seal-Lip Type | 2 |
| 16***58 | Stick Group-Hoe | 1 |
166-1661 Stick Gp-Hoe
| 09***30 | Seal-Lip Type | 4 |
| 16***92 | Seal-Lip Type | 2 |
| 16***61 | Stick Group-Hoe | 1 |
235-3782 Stick Gp-Hoe
| 09***30 | Seal-Lip Type | 2 |
| 16***92 | Seal-Lip Type | 2 |
| 16***80 | Bearing-Sleeve | 4 |
218-5306 Stick Gp-Hoe
| 09***30 | Seal-Lip Type | 2 |
| 16***92 | Seal-Lip Type | 2 |
| 16***88 | Shim; (2-mm Thk) | 2 |
Lubrication System
190-5739 Breather Gp
| 09***51 | Clamp | 1 |
| 19***39 | Breather Group; -Crankcase | 1 |
| 19***80 | Hose; (Crankcase Breather) | 1 |
205-6808 Filter & Mtg Gp-Engine Oil
| 15***24 | Valve Group-Fluid Sampling; (3/8-18 Nptf Thd) | 1 |
| 18***56 | Base As | 1 |
| 19***44 | Support As | 1 |
201-3903 Lines Gp-Engine Oil
| 08***57 | Clamp | 2 |
| 09***54 | Bolt (16mm Long); (16-mm Long) | 1 |
| 09***37 | Gasket | 2 |
190-5728 Pump Gp-Engine Oil
| 09***81 | O-Ring, Oil Filter | 1 |
| 09***52 | Plug | 1 |
| 09***20 | O-Ring, Oil Filter Head | 1 |
212-8639 Pump Gp-Engine Oil
| 09***81 | O-Ring, Oil Filter | 1 |
| 09***20 | O-Ring, Oil Filter Head | 1 |
| 09***74 | Bolt (55mm Long) | 1 |
Machine Arrangement
208-3254 Chassis Ar
| 14***16 | Lighting Group-Flood; -Chassis | 1 |
| 16***54 | Box Group-Storage | 1 |
| 16***58 | Handrail Group | 1 |
301-2835 Chassis Ar
| 14***16 | Lighting Group-Flood; -Chassis | 1 |
| 16***54 | Box Group-Storage | 1 |
| 16***58 | Handrail Group | 1 |
208-3253 General Ar
| 17***15 | Power Train Ar | 1 |
| 18***00 | Hydraulic Ar | 1 |
| 20***02 | Engine Ar | 1 |
Operator Station
237-0097 Air Conditioner & Mounting Gp -Fresh Air Intake
| 11***68 | Seal-O-Ring (Id=13.8mm); (Id=13.80mm) | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
| 12***63 | Seal-O-Ring; (Id=6.70mm) | 1 |
189-2741 Air Conditioner & Mounting Gp
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 12***33 | Clip | 2 |
237-0099 Air Conditioner Gp -Fresh Air Intake
| 12***42 | Relay; (Blower Motor) | 3 |
| 12***46 | Thermistor; (Temperature-Heater Core) | 1 |
| 22***31 | Screw-Self-Tapping | 44 |
214-1268 Air Conditioner Gp
| 18***42 | Compressor Group-Refrigerant | 1 |
| 18***41 | Air Conditioner & Mounting Group | 1 |
| 18***43 | Duct Group-Cab Air | 1 |
236-7308 Air Conditioner Gp -Fresh Air Intake
| 21***58 | Wiring Group-Fan | 1 |
| 22***46 | Duct Group-Cab Air | 1 |
| 23***67 | Condenser & Mtg Group-Refrigerant | 1 |
189-2819 Air Conditioner Gp
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 3 |
| 15***67 | Clip | 1 |
| 15***68 | Screw-Tapping | 3 |
169-7654 Box Gp-Storage
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 2 |
210-5779 Cab Gp
| 17***30 | Ashtray | 1 |
| 19***24 | Holder-Cup | 1 |
| 19***25 | Box; (Magazine) | 1 |
241-0626 Cab Gp -Eame Market
| 17***30 | Ashtray | 1 |
| 19***24 | Holder-Cup | 1 |
| 19***25 | Box; (Magazine) | 1 |
248-9983 Cab Gp
| 08***84 | Grommet | 1 |
| 09***55 | Screw-Machine; (M4x0.07x12-mm) | 1 |
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
229-9032 Cab Gp
| 08***84 | Grommet | 1 |
| 09***55 | Screw-Machine; (M4x0.07x12-mm) | 2 |
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
210-5780 Cab Gp
| 08***84 | Grommet | 1 |
| 09***55 | Screw-Machine; (M4x0.07x12-mm) | 2 |
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
249-3911 Cab Gp
| 17***30 | Ashtray | 1 |
| 19***24 | Holder-Cup | 1 |
| 19***25 | Box; (Magazine) | 1 |
241-0627 Cab Gp -Eame Market
| 08***84 | Grommet | 1 |
| 09***55 | Screw-Machine; (M4x0.07x12-mm) | 2 |
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
225-5724 Cab Gp
| 17***30 | Ashtray | 1 |
| 19***24 | Holder-Cup | 1 |
| 19***25 | Box; (Magazine) | 1 |
183-8242 Compressor Gp-Refrigerant
| 11***18 | Clip | 1 |
| 12***46 | Cover | 1 |
| 12***57 | Pulley Group-Idler | 1 |
237-0064 Compressor Gp-Refrigerant
| 08***71 | Nut | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***18 | Clip | 1 |
189-2746 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***46 | Compressor Group-Refrigerant | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
236-1467 Condenser & Mtg Gp-Refrigerant
| 10***03 | Guard | 1 |
| 23***67 | Condenser & Mtg Group-Refrigerant | 1 |
| 23***07 | Condenser Group-Refrigerant; -Fresh Air Intake | 1 |
214-1269 Condenser & Mtg Gp-Refrigerant
| 21***64 | Condenser Group-Refrigerant | 1 |
| 21***69 | Condenser & Mtg Group-Refrigerant | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 6 |
236-1907 Condenser Gp-Refrigerant -Fresh Air Intake
| 23***07 | Condenser Group-Refrigerant; -Fresh Air Intake | 1 |
| 23***85 | Fan Group-Condenser | 1 |
| 23***87 | Condenser As-Refrigerant | 1 |
196-1633 Console Gp-Operator
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 11***70 | Support Assem. | 1 |
| 11***71 | Spring | 1 |
229-9044 Console Gp-Operator -A/C With Fresh Air Intake
| 12***17 | Guard | 2 |
| 12***18 | Guard | 2 |
| 12***22 | Support | 2 |
229-9057 Console Gp-Operator
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 16***28 | Nut; (Speed) | 2 |
| 16***29 | Nut; (Speed) | 2 |
189-2736 Console Gp-Operator
| 12***17 | Guard | 2 |
| 12***18 | Guard | 2 |
| 12***22 | Support | 2 |
189-2739 Console Gp-Operator
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 16***29 | Nut; (Speed) | 2 |
| 18***39 | Console Group-Operator | 1 |
189-2749 Console Gp-Operator
| 09***82 | Clamp | 4 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 16***29 | Nut; (Speed) | 2 |
200-6630 Control & Mtg Gp-Joystick
| 18***73 | Control Group-Joystick; -Forestry, Lh | 1 |
| 18***74 | Control Group-Joystick; -Forestry, Rh | 1 |
| 20***30 | Control & Mtg Group-Joystick | 1 |
252-0482 Control & Mtg Gp-Joystick
| 21***48 | Control Group-Joystick; -Forestry, Lh | 1 |
| 21***49 | Control Group-Joystick; -Forestry, Rh | 1 |
| 25***82 | Control & Mtg Group-Joystick | 1 |
189-2721 Control Gp-Blade
| 17***28 | Knob | 1 |
| 18***21 | Control Group-Blade | 1 |
| 18***16 | Support As. | 1 |
164-0532 Control Gp-Handle -Rh
| 08***70 | Sleeve | 2 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
189-2821 Control Gp-Heat & Air Cond
| 15***68 | Screw-Tapping | 2 |
| 18***21 | Control Group-Heat & Air Cond | 1 |
| 20***96 | Motor As | 1 |
153-8759 Control Gp-Hydraulic Pedal
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***11 | Pedal-Rubber; (Rh) | 1 |
| 12***73 | Pin | 1 |
153-8760 Control Gp-Hydraulic Pedal
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***11 | Pedal-Rubber; (Rh) | 1 |
| 12***73 | Pin | 1 |
216-6749 Control Gp-Joystick -Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***22 | Pin-Spring | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 6 |
187-9973 Control Gp-Joystick -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***22 | Pin-Spring | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 6 |
165-9518 Control Gp-Joystick -Lh
| 16***33 | Control Group-Joystick | 1 |
| 16***18 | Control Group-Joystick; -Lh | 1 |
| 17***47 | Valve Group-Pilot; -Joystick Control | 1 |
187-9974 Control Gp-Joystick -Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***22 | Pin-Spring | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 6 |
164-0533 Control Gp-Joystick -Lh
| 08***70 | Sleeve | 2 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
165-9519 Control Gp-Joystick -Rh
| 16***32 | Control Group-Handle | 1 |
| 16***19 | Control Group-Joystick; -Rh | 1 |
| 17***47 | Valve Group-Pilot; -Joystick Control | 1 |
216-6748 Control Gp-Joystick -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***22 | Pin-Spring | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 6 |
170-9497 Control Gp-Pilot Operated Hyd -Travel
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
236-6795 Cover Gp-Access
| 18***80 | Seal; (8.8-cm) | 0 |
| 20***64 | Seal | 1 |
| 22***94 | Lock As | 1 |
214-8457 Cover Gp-Access
| 18***80 | Seal; (8.8-cm) | 0 |
| 20***64 | Seal | 1 |
| 21***57 | Cover Group-Access | 1 |
199-9375 Cover Gp-Storage
| 19***75 | Cover Group-Storage | 1 |
| 19***76 | Cover As | 1 |
| 20***64 | Seal | 1 |
225-5791 Distributor Gp-Air
| 22***91 | Distributor Group-Air | 1 |
| 22***17 | Screw-Tapping | 3 |
| 22***54 | Screw-Tapping | 4 |
207-0245 Door Gp-Cab
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 12***58 | Striker | 2 |
189-2743 Duct Gp-Cab Air
| 18***43 | Duct Group-Cab Air | 1 |
| 20***37 | Cover As | 1 |
| 20***41 | Duct As | 1 |
229-9046 Duct Gp-Cab Air
| 20***37 | Cover As | 1 |
| 20***41 | Duct As | 1 |
| 20***42 | Duct As | 1 |
207-0106 Evaporator Gp-Refrigerant
| 15***12 | Seal | 1 |
| 15***14 | Screw-Tapping | 1 |
| 15***15 | Insulator | 1 |
237-2085 Fan Gp-Condenser
| 23***08 | Motor As | 1 |
| 23***09 | Fan | 1 |
| 23***10 | Guard As | 1 |
235-9030 Guard Ar-Overhead
| 23***30 | Guard Ar-Overhead | 1 |
| 23***31 | Guard Group-Overhead; (Ovhd) (357page) | 1 |
| 23***32 | Guard Group-Front Window; (Wdo-B) (358page) | 1 |
208-3326 Guard Ar-Vandalism
| 18***18 | Guard Group-Vandalism | 1 |
| 20***26 | Guard Ar-Vandalism | 1 |
| 20***27 | Box & Mtg Group-Storage | 1 |
235-9032 Guard Gp-Front Window
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 23***32 | Guard Group-Front Window; (Wdo-B) (358page) | 1 |
| 29***95 | Film-Certification; (Ops Guard, Read Omm, English) | 1 |
235-9031 Guard Gp-Overhead
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 23***31 | Guard Group-Overhead; (Ovhd) (357page) | 1 |
| 24***86 | Guard As | 1 |
189-2718 Guard Gp-Vandalism
| 12***95 | Pin | 6 |
| 12***96 | Pin | 1 |
| 18***18 | Guard Group-Vandalism | 1 |
214-1252 Guard Gp-Window
| 21***52 | Guard Group-Window | 1 |
| 31***46 | Frame As | 1 |
| 8T***92 | Capscrew; (Hex Hd) (M12 X 1.75 X 25, Gr10.9, Z) | 6 |
214-1253 Guard Gp-Window
| 21***84 | Frame As | 1 |
| 21***53 | Guard Group-Window | 1 |
| 8T***92 | Capscrew; (Hex Hd) (M12 X 1.75 X 25, Gr10.9, Z) | 4 |
207-0197 Hatch Gp-Roof
| 12***33 | Packing | 4 |
| 16***94 | Catch | 1 |
| 19***44 | Hinge As | 2 |
255-3100 Headrest As-Seat
| 25***00 | Headrest As-Seat | 1 |
225-5802 Heater & Mtg Gp-Cab
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
| 17***17 | Sensor Group-Temperature; (Ambient Air) | 1 |
| 22***91 | Distributor Group-Air | 1 |
225-5718 Heater Ar-Cab
| 18***35 | Lines Group-Heater | 1 |
| 22***18 | Heater Ar-Cab | 1 |
| 22***02 | Heater & Mtg Group-Cab | 1 |
225-5803 Heater Gp-Cab
| 12***42 | Relay; (Blower Motor) | 1 |
| 12***46 | Thermistor; (Temperature-Heater Core) | 1 |
| 22***31 | Screw-Self-Tapping | 54 |
5i-8381 Horn Gp-Electric
| 09***91 | Horn | 1 |
| 5I***81 | Horn Group-Electric | 1 |
| 8T***00 | Bolt (M8x1.25x16mm); (M8x1.25x16-mm) | 2 |
085-6444 Latch Gp-Front Window
| 08***44 | Latch Group-Front Window | 1 |
| 08***45 | Lock | 1 |
| 08***46 | Lock | 1 |
214-1270 Lines Gp-Air Conditioner
| 12***74 | Clip-Loop; (12.7mm Id) | 1 |
| 14***95 | Guard; (266-cm) | 0 |
| 18***87 | Guard | 1 |
237-0101 Lines Gp-Air Conditioner -Fresh Air Intake
| 11***67 | Seal-O-Ring (Id=11.0mm); (Id=11.00mm) | 2 |
| 11***68 | Seal-O-Ring (Id=13.8mm); (Id=13.80mm) | 2 |
| 12***63 | Seal-O-Ring; (Id=6.70mm) | 2 |
189-2735 Lines Gp-Heater
| 09***61 | Strap; (Cable) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Lines Group-Heater | 1 |
7y-0059 Literature Gp
| 09***45 | Cable; (Lanyard) | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
189-2731 Mirror Gp-Down View
| 18***31 | Mirror Group-Down View | 1 |
| 18***72 | Support As | 1 |
| 4Y***07 | Mirror (Under View) | 1 |
247-8355 Monitor Gp-Operator
| 19***56 | Screw-Truss Head | 4 |
| 19***58 | Cover As | 1 |
| 19***59 | Lamp As; (28 Vdc) | 8 |
239-8573 Mounting Gp-Radio
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
210-5778 Operator Ar
| 17***40 | Wiring Group-Console | 1 |
| 17***44 | Wiring Group-Cab | 1 |
| 17***50 | Radio Group; (Am/Fm) | 1 |
229-9041 Platform Gp-Operator -A/C With Fresh Air Intake
| 18***25 | Cover | 1 |
| 18***32 | Cover | 1 |
| 18***34 | Floor Mat | 1 |
189-2728 Platform Gp-Operator
| 18***28 | Platform Group-Operator | 1 |
| 18***25 | Cover | 1 |
| 18***32 | Cover | 1 |
170-9450 Radio Gp
| 17***50 | Radio Group; (Am/Fm) | 1 |
| 19***21 | Wiring Group-Radio; (Radio) | 1 |
| 20***64 | Wiring Group-Console; (Console) | 1 |
281-1251 Seat Ar-Suspension
| 28***51 | Seat Ar-Suspension | 1 |
| 28***52 | Support Group-Seat | 1 |
| 28***53 | Seat Group-Suspension | 1 |
305-0398 Seat Belt Gp -Retractable, 3-In
| 30***98 | Seat Belt Group; -Retractable, 3-In | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
201-4437 Seat Belt Gp -Retractable, 3-In
| 20***37 | Seat Belt Group; -Retractable, 3-In | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
255-3107 Seat Gp
| 19***23 | Support As | 1 |
| 20***37 | Seat Belt Group; -Retractable, 3-In | 1 |
| 20***32 | Screw-Button Head; (M8x1.25x40-mm) | 4 |
240-8344 Seat Gp
| 19***23 | Support As | 1 |
| 20***32 | Screw-Button Head; (M8x1.25x40-mm) | 4 |
| 24***44 | Seat Group | 1 |
255-3109 Seat Gp
| 19***23 | Support As | 1 |
| 20***37 | Seat Belt Group; -Retractable, 3-In | 1 |
| 20***32 | Screw-Button Head; (M8x1.25x40-mm) | 4 |
196-1413 Seat Gp
| 19***13 | Seat Group | 1 |
| 19***14 | Seat Group | 1 |
| 19***23 | Support As | 1 |
196-1414 Seat Gp
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
| 19***14 | Seat Group | 1 |
| 19***15 | Seat Group | 1 |
281-1253 Seat Gp-Suspension
| 25***74 | Seat Group-Suspension; -Cloth | 1 |
| 26***15 | Support Group-Seat | 1 |
| 26***12 | Plate As | 1 |
251-2974 Seat Gp-Suspension -Cloth
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
| 19***19 | Armrest; (Lh) | 1 |
| 19***20 | Armrest; (Rh) | 1 |
189-2730 Support Gp-Seat
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 1 |
| 18***30 | Support Group-Seat | 1 |
| 18***97 | Support Group-Seat | 1 |
229-9058 Support Gp-Seat
| 22***95 | Bracket As | 1 |
| 22***58 | Support Group-Seat | 1 |
| 24***47 | Support Group-Seat | 1 |
189-2797 Support Gp-Seat
| 18***97 | Support Group-Seat | 1 |
| 18***00 | Cover | 1 |
| 20***40 | Screw; (M6x1x12-mm) | 6 |
240-6948 Support Gp-Seat
| 22***95 | Bracket As | 1 |
| 24***48 | Support Group-Seat | 1 |
| 29***26 | Support Group-Seat | 1 |
281-1252 Support Gp-Seat
| 26***41 | Support Group-Seat | 1 |
| 28***52 | Support Group-Seat | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
293-4726 Support Gp-Seat
| 20***40 | Screw; (M6x1x12-mm) | 2 |
| 20***41 | Seal; (5-cm) | 0 |
| 20***58 | Sheet | 1 |
268-5115 Support Gp-Seat
| 12***04 | Plate | 2 |
| 20***40 | Screw; (M6x1x12-mm) | 2 |
| 20***41 | Seal; (5-cm) | 0 |
229-9021 Support Gp-Seat
| 18***00 | Cover | 1 |
| 20***40 | Screw; (M6x1x12-mm) | 6 |
| 20***41 | Seal; (5-cm) | 0 |
268-5141 Support Gp-Seat
| 20***40 | Screw; (M6x1x12-mm) | 2 |
| 20***58 | Sheet | 1 |
| 20***83 | Cover As | 1 |
240-5047 Support Gp-Seat
| 20***40 | Screw; (M6x1x12-mm) | 6 |
| 20***41 | Seal; (5-cm) | 0 |
| 20***58 | Sheet | 1 |
189-2722 Washer Gp-Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***01 | Tank As-Window Washer | 1 |
| 18***22 | Washer Group-Window | 1 |
196-1436 Window Gp-Cab
| 08***44 | Latch Group-Front Window | 2 |
| 19***36 | Window Group-Cab | 1 |
| 21***33 | Frame As | 1 |
196-1432 Window Gp-Front
| 12***87 | Stopper | 2 |
| 12***91 | Snap | 2 |
| 12***01 | Snap | 3 |
196-1433 Wiper Gp-Window
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 3 |
Power Train
300-3497 Drive Gp-Final -With Motor
| 09***82 | Plug, Tapered | 7 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 4 |
326-6319 Drive Gp-Final -With Motor
| 09***82 | Plug, Tapered | 7 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 4 |
171-9329 Drive Gp-Final
| 09***75 | Seal - O-Ring (7.80 mm Id) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 3 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 1 |
148-4736 Drive Gp-Final -With Motor
| 08***91 | Pin, Dowel | 2 |
| 09***22 | Plug | 4 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 2 |
171-9315 Power Train Ar
| 14***36 | Final Drive Group; -With Motor | 2 |
| 16***79 | Sprocket Group | 2 |
| 17***15 | Power Train Ar | 1 |
168-6679 Sprocket Gp
| 13***26 | Sprocket-Track | 1 |
| 16***79 | Sprocket Group | 1 |
| 8C***25 | Bolt; (M14x2x35-mm) | 12 |
Service Equipment And Supplies
249-3042 Film Gp -Medium Pressure Controls
| 24***36 | Film-Information; (Operator Controls) | 1 |
| 24***42 | Film Group; -Medium Pressure Controls | 1 |
209-2879 Film Gp -Shear Control
| 20***78 | Film-Identification; (Operator Controls)(Controls) | 1 |
| 20***79 | Film Group; -Shear Control | 1 |
202-1536 Film Gp
| 16***18 | Film-Instruction; (Shear)(Lubrication Chart) | 1 |
| 20***36 | Film Group | 1 |
256-0891 Film Gp
| 16***18 | Film-Instruction; (Shear)(Lubrication Chart) | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 25***91 | Film Group | 1 |
224-8402 Film Gp
| 17***41 | Film-Caution; (Lift Eye, Tie-Down Location) | 1 |
| 22***02 | Film Group | 1 |
256-0894 Film Gp
| 25***71 | Plate-Instruction; (Control Pattern, Read Omm) | 1 |
| 25***73 | Film-Warning; (Crush Hazard, Read Omm, Intl) | 1 |
| 25***67 | Film-Information; (Two Way Pattern, Read Omm) | 1 |
208-3332 Film Gp -Blade Ar
| 10***74 | Film; (Instruction) (Blade) | 1 |
| 16***70 | Film; (No Step) | 1 |
| 20***32 | Film Group; -Blade Ar | 1 |
208-3259 Film Gp
| 20***59 | Film Group | 1 |
| 21***61 | Film-Instruction; (English) | 1 |
| 21***62 | Film-Instruction; (French) | 1 |
202-1529 Film Gp
| 16***18 | Film-Instruction; (Shear)(Lubrication Chart) | 1 |
| 20***29 | Film Group | 1 |
| 7I***65 | Film-Notice; (Hammer, Read Omm)(English) | 1 |
211-6307 Plate & Film Gp -Greek
| 12***37 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 16***30 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 17***73 | Film-Warning; (Window Lock) | 1 |
301-2836 Plate & Film Gp
| 12***07 | Film-Instruction; (On Radiator Filler Cap) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***26 | Film; (Oil) | 1 |
224-8397 Plate & Film Gp -Icelandic
| 10***07 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***01 | Film-Warning; (Travel Control) | 1 |
| 10***37 | Film-Notice; (Engine Start Switch)(Key Position) | 1 |
211-6304 Plate & Film Gp -Italian
| 12***33 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 16***27 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 17***70 | Film-Warning; (Window Lock) | 1 |
211-6302 Plate & Film Gp -Spanish
| 11***61 | Film - Air Cleaner (Later Machines Only) | 1 |
| 12***31 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 16***25 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
224-8394 Plate & Film Gp -Swedish
| 10***48 | Film-Warning; (Travel Control) | 1 |
| 10***60 | Film-Notice; (Engine Start Switch)(Key Position) | 1 |
| 10***62 | Film-Warning; (Clearance) | 1 |
256-0875 Plate & Film Gp
| 12***07 | Film-Instruction; (On Radiator Filler Cap) | 1 |
| 13***52 | Film-Identification; (Cat, Rh) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
224-8395 Plate & Film Gp -Norwegian
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***02 | Film-Warning; (Travel Control) | 1 |
| 10***38 | Film-Notice; (Engine Start Switch)(Key Position) | 1 |
208-3255 Plate & Film Gp
| 09***29 | Ring-Key | 1 |
| 12***07 | Film-Instruction; (On Radiator Filler Cap) | 1 |
| 12***29 | Film; (Accum, High Press, Read Omm) | 1 |
211-6306 Plate & Film Gp -Dutch
| 11***55 | Film-Air Cleaner (Later Amchines Only) | 1 |
| 12***35 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 16***29 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
211-6308 Plate & Film Gp -Danish
| 11***58 | Film - Air Cleaner (Later Machines Only) | 1 |
| 12***38 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 16***31 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
211-6309 Plate & Film Gp -Chinese
| 13***01 | Film-Warning; (Travel Control) | 1 |
| 13***02 | Film-Notice; (Engine Start Switch) | 1 |
| 13***03 | Film-Warning; (Jump Start, Read Omm) | 1 |
224-8396 Plate & Film Gp -Finnish
| 10***09 | Film-Warning; (Jumper Cables) | 1 |
| 10***03 | Film-Warning; (Travel Control) | 1 |
| 10***39 | Film-Notice; (Engine Start Switch) | 1 |
211-6305 Plate & Film Gp -Portuguese
| 12***34 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 16***28 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 17***71 | Film-Warning; (Window Lock) | 1 |
256-0904 Plate & Film Gp
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***45 | Film-Warning; (Do Not Use Ether, U.S) | 1 |
| 22***13 | Film; (Warning) (Jump Start) (Inside Of Lh Battery Box Cover) | 1 |
211-6301 Plate & Film Gp -French
| 12***30 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 16***24 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 17***67 | Film-Warning; (Window Lock)(Windshield) | 1 |
211-6303 Plate & Film Gp -German
| 12***32 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 16***26 | Film-Warning; (Universal, Read Omm)(Read Operators Manual) | 1 |
| 17***69 | Film-Warning; (Window Lock) | 1 |
Undercarriage
136-2462 Adjustment Gp-Hydraulic Track
| 09***07 | Seal-O-Ring (Id=43.70mm) | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 09***01 | Seal-Lip Type | 1 |
208-3256 Frame Ar-Undercarriage
| 10***29 | Guard Group-Travel Motor | 1 |
| 13***96 | Idler Group-Front | 2 |
| 17***92 | Gear & Bearing Group-Swing | 1 |
178-0939 Frame As-Undercarriage
| 17***39 | Frame As-Undercarriage | 1 |
| 17***40 | Frame As-Undercarriage | 1 |
178-0940 Frame As-Undercarriage
| 17***40 | Frame As-Undercarriage | 1 |
| 17***41 | Frame As-Undercarriage | 1 |
| 17***42 | Frame As-Undercarriage | 1 |
276-0978 Guard Gp-Track Guide
| 27***78 | Guard Group-Track Guide | 1 |
| 27***79 | Guard As-Track Guide | 2 |
| 8T***92 | Capscrew; (Hex Hd) (M12 X 1.75 X 25, Gr10.9, Z) | 8 |
102-3129 Guard Gp-Travel Motor
| 10***29 | Guard Group-Travel Motor | 1 |
| 10***33 | Plate | 2 |
| 8C***92 | Bolt; (Locking) (M12x1.75x30mm) | 8 |
145-3017 Idler Gp-Front
| 09***64 | Ring-Sealing | 2 |
| 09***14 | Seal, Floating | 2 |
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
136-2397 Idler Gp-Front
| 13***88 | Spring Group-Recoil | 1 |
| 13***97 | Idler Group-Front | 1 |
| 27***67 | Idler Group-Front | 1 |
277-8667 Idler Gp-Front
| 09***64 | Ring-Sealing | 2 |
| 09***14 | Seal, Floating | 2 |
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
185-9162 Idler Gp-Front
| 09***64 | Ring-Sealing | 2 |
| 09***14 | Seal, Floating | 2 |
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
136-2396 Idler Gp-Front
| 13***96 | Idler Group-Front | 1 |
| 13***97 | Idler Group-Front | 1 |
| 13***62 | Adjustment Group-Hydraulic Track | 1 |
194-1172 Link As-Track
| 09***33 | Pin-Cotter | 1 |
| 13***04 | Link-Track; (Rh) | 39 |
| 13***05 | Link-Master; (Rh) | 1 |
179-3031 Roller Ar-Track & Carrier
| 09***77 | Setscrew-Socket | 2 |
| 12***06 | Roller Group-Track-Single Flange | 10 |
| 17***31 | Roller Ar-Track & Carrier | 1 |
277-8576 Roller Gp-Track Carrier
| 09***41 | Seal-O-Ring (Id=41.70mm) | 1 |
| 09***61 | Bearing-Carrier Roller | 2 |
| 09***62 | Retainer | 1 |
127-3806 Roller Gp-Track-Single Flange
| 09***59 | Seal-O-Ring (Id=34.40mm) | 2 |
| 10***15 | Shaft-Track Roller | 1 |
| 10***16 | Dowel | 2 |
130-9288 Spring Gp-Recoil
| 10***93 | Plate | 1 |
| 13***88 | Spring Group-Recoil | 1 |
| 13***95 | Spring | 1 |
194-1171 Track Gp
| 13***01 | Bolt-Track; (M14x1.5x35-mm) | 160 |
| 13***02 | Nut-Track; (M14x1.5 Thd) | 160 |
| 14***50 | Shoe-Track; (Triple Grouser Shoe) | 40 |
194-1190 Track Gp
| 09***55 | Bolt-Track; (M14x1.5x45-mm) | 160 |
| 13***02 | Nut-Track; (M14x1.5 Thd) | 160 |
| 16***92 | Shoe | 1 |
194-1189 Track Gp
| 13***00 | Shoe-Track; (450-mm Triple Grouser Shoe) | 40 |
| 13***01 | Bolt-Track; (M14x1.5x35-mm) | 160 |
| 13***02 | Nut-Track; (M14x1.5 Thd) | 160 |
Work Tools
102-3143 Adjuster Gp-Bucket
| 08***24 | Plate | 1 |
| 08***91 | Pin, Dowel | 1 |
| 08***04 | Bushing | 1 |
208-2037 Blade & Mounting Gp
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 09***57 | Washer; (Hard) (100x63x9mm Thk) | 2 |
| 09***30 | Seal-Lip Type | 4 |
235-3866 Blade & Mounting Gp
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 09***57 | Washer; (Hard) (100x63x9mm Thk) | 2 |
| 09***30 | Seal-Lip Type | 4 |
235-3868 Blade & Mounting Gp
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 09***57 | Washer; (Hard) (100x63x9mm Thk) | 2 |
| 09***30 | Seal-Lip Type | 4 |
186-5670 Blade & Mounting Gp
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 09***57 | Washer; (Hard) (100x63x9mm Thk) | 2 |
| 09***30 | Seal-Lip Type | 4 |
208-3277 Blade Ar
| 16***72 | Lines Group-Cylinder; -Blade | 1 |
| 16***01 | Lines Group-Pilot | 1 |
| 17***39 | Frame As-Undercarriage | 1 |
208-3331 Blade Ar
| 16***72 | Lines Group-Cylinder; -Blade | 1 |
| 16***01 | Lines Group-Pilot | 1 |
| 17***39 | Frame As-Undercarriage | 1 |
235-3869 Blade Gp-Straight
| 14***89 | Edge-Cutting | 1 |
| 16***80 | Bearing-Sleeve | 2 |
| 19***93 | Plate-Wear | 2 |
208-2038 Blade Gp-Straight
| 14***89 | Edge-Cutting | 1 |
| 16***87 | Blade & Bearing As | 1 |
| 19***93 | Plate-Wear | 2 |
186-5671 Blade Gp-Straight
| 14***88 | Edge-Cutting | 1 |
| 15***72 | Bit-End | 2 |
| 16***86 | Blade & Bearing As | 1 |
235-3867 Blade Gp-Straight
| 14***88 | Edge-Cutting | 1 |
| 15***72 | Bit-End | 2 |
| 16***80 | Bearing-Sleeve | 2 |
177-8109 Bucket & Adjuster Gp
| 10***43 | Adjuster Group-Bucket | 1 |
| 17***09 | Bucket & Adjuster Group | 1 |
| 17***10 | Bucket As-Heavy Duty Rock | 1 |
241-0252 Bucket & Adjuster Gp -Heavy-Duty Rock
177-8111 Bucket & Adjuster Gp
| 10***43 | Adjuster Group-Bucket | 1 |
| 17***11 | Bucket & Adjuster Group | 1 |
| 17***12 | Bucket As-Excavation | 1 |
241-0253 Bucket & Adjuster Gp
231-4547 Bucket & Adjuster Gp
177-8115 Bucket & Adjuster Gp
177-8113 Bucket & Adjuster Gp
301-8304 Bucket As-Excavation
| 15***52 | Adapter | 3 |
| 15***55 | Plate | 1 |
| 15***56 | Axle-Shaft, Articula, Plate | 2 |
301-8306 Bucket As-Excavation
| 15***52 | Adapter | 5 |
| 15***83 | Edge As | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
301-8303 Bucket As-Excavation
301-8307 Bucket As-Excavation
| 15***52 | Adapter | 6 |
| 15***85 | Edge As | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
177-8116 Bucket As-Excavation
177-8112 Bucket As-Excavation
177-8114 Bucket As-Excavation
177-8110 Bucket As-Heavy Duty Rock
| 15***52 | Adapter | 3 |
| 15***50 | Plate As | 1 |
| 15***55 | Plate | 1 |
301-8308 Bucket As-Heavy Duty Rock
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 4 |
| 15***42 | Plate As-Box | 1 |
| 24***72 | Plate-Wear | 1 |
301-8309 Bucket As-Heavy Duty Rock
| 11***53 | Adapter-Tip; (J-250, 2-Strap, Center) | 5 |
| 15***66 | Plate As-Box | 1 |
| 24***67 | Plate-Wear | 1 |
289-5246 Edge Gp-Cutting
| 27***56 | Edge-Cutting | 1 |
| 28***46 | Edge Group-Cutting | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 8 |
8e-3750 Tip Gp-Long -J-250
| 8E***50 | Tip Group-Long; -J-250 | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
100-6463 Tip Gp-Penetration -J-250
| 10***63 | Tip Group-Penetration; -Penetration - Sharp Corner | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
100-6462 Tip Gp-Penetration -J-250
| 10***62 | Tip Group-Penetration; -J-250 | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
100-6464 Tip Gp-Penetration -J-250
| 10***64 | Tip Group-Penetration; -Penetration - Sharp Center | 1 |
| 8E***58 | Pin-G.E.T. | 1 |
| 8E***59 | Retainer Assem. | 1 |
308C serial number reference
On the 308C CR the serial/PIN plate is a metal tag mounted on the front of the machine, below the operator's cab, wherever the frame gives clear panel space. The plate stamps the full Product Identification Number; the first three characters are the letter prefix identifying model and configuration (KCX, CRW, or CPE for this family), followed by a sequential unit number, e.g. KCX00123. Match the prefix plus number against the parts/service manual break to confirm exact coverage.
| Prefix | Identifies | Notes |
|---|---|---|
| KCX | 308C CR mini/midi hydraulic excavator, standard (mono) boom configuration | Base compact-radius (CR) configuration, fixed monoboom. Fitted with the Mitsubishi 4M40E1 diesel, 4-cylinder, gross power roughly 41 kW/55 hp, net (flywheel) power roughly 41 kW/54 hp. Production runs roughly 2004 to 2008, replaced from 2008 by the 308D CR (which uses a different 4M40-TL engine variant, not this one). Shop, parts, and electrical-system manuals are indexed under this prefix, and it is the most commonly documented 308C CR serial range. |
| CRW | 308C CR mini/midi hydraulic excavator, swing/offset boom variant | Same base machine and Mitsubishi 4M40E1 engine as KCX and CPE, differing mainly in boom type: a swinging/offset boom rather than the fixed mono boom. Prefix is documented together with KCX and CPE in the same shop/parts manual set. Exact boom terminology ("king post" style) is thinly sourced — confirm exact configuration with dealer. |
| CPE | 308C CR mini/midi hydraulic excavator, alternate boom configuration | Same base 308C CR platform and Mitsubishi 4M40E1 engine as KCX and CRW. Covered by the same service/parts manual family ("CPE1 and up"). Exact boom/feature distinction versus the other two prefixes is not clearly documented in available sources — confirm exact configuration with dealer. |
Frequently asked questions
What engine does the Caterpillar 308C CR use?
A Mitsubishi 4M40-E1 four-cylinder diesel of 2.84 L (173 in3) displacement, rated 41 kW (55 hp) gross and 41 kW (54 hp) at the flywheel. Fuel delivery is fully mechanical - there is no engine control module, so the cab monitor tracks only coolant temperature, hydraulic oil temperature, and fuel level.
What is the operating weight of the Caterpillar 308C CR?
Factory operating weight runs from about 7,430 kg (16,370 lb) on a medium-stick, standard-shoe unit to about 8,040 kg (17,730 lb) on a long-stick unit fitted with 600 mm (24 in) shoes and a dozer blade. Exact weight varies by stick length, shoe width, and blade or attachment configuration.
What replaced the Caterpillar 308C CR?
The 308D CR took over the compact-radius 8-tonne class from around 2008, carrying the same short-tail layout forward with higher bucket and stick digging forces. It has no connection to the current ‘308 CR’ line launched in 2019, which reuses the model name on a newer, larger machine with a Cat C2.8/C3.3B engine.
What 308C owners discuss
What engine does the 308C CR run, and does it have any known startup quirks?
The 308C CR (the only 308C Caterpillar sold, roughly 2002-2008) uses a Mitsubishi 4M40-E1 diesel, not a Cat-designed block. It's a long-stroke design tuned for torque at low-to-mid rpm, with laser-hardened cylinder walls to cut oil consumption. Owners report hard cold starts traced almost always to the glow plug relay or a blown glow plug fuse rather than the engine itself - a bad relay or corroded ground means the plugs never heat, so the engine cranks and cranks before catching. Don't confuse this machine with the newer 308 CR (2019-present), which runs a Cat C2.8/C3.3B engine on an unrelated platform despite sharing the model name. If hard starting persists after checking the relay, fuse, and battery, have your dealer verify glow plug circuit resistance.
Engine randomly drops to low idle with the idle indicator lit and won't respond to the throttle dial - what's going on?
This shows up on 308C CR machines as a sudden throttle drop under load, low idle light on, and the engine stuck there no matter where the throttle dial is set. Community consensus points to the throttle/engine-speed sensor circuit or ECM wiring, not a fuel or mechanical engine fault - check the throttle position sensor connector and its grounds before assuming the ECM is bad. Because this affects engine response mid-operation, have your dealer verify the fault code and sensor circuit before returning the machine to work.
Boom, stick, and auxiliary functions all quit working at once - is that a pump or valve failure?
Rarely. Owners chasing this on the 308C CR found solenoid voltages at the main control valve swinging anywhere from 4 to 21 volts instead of holding steady, with some solenoids reading no voltage at all. That pattern points to a poor chassis or valve-bank ground rather than a failed pump or dead solenoids - the machine has multiple ground points that corrode over time. Check grounds and connector pins across the harness before condemning the main control valve or pilot solenoids. Sudden loss of boom/stick control is a safety issue - have your dealer verify ground integrity and solenoid resistance before working near people or structures.
What undercarriage wear pattern is typical for a machine like this?
Same pattern as any rubber-tracked mini/midi excavator: sprockets wear out ahead of the rest of the undercarriage, and pointed or hooked sprocket teeth (instead of round) are the first sign it's time to replace, often showing up as the track derailing or skipping over the lugs. Track tension needs checking weekly - loose tracks jump off, overtight tracks tear and chew up idler bearings. A single track that runs weak or loose despite correct tensioning is commonly traced to the final drive, not the rubber itself.
One track feels weak or loses power - is that a track problem?
Usually not the rubber. The recurring cause on this class of Cat mini excavator is a failed face seal (duo-cone/mechanical seal) between the sprocket and the travel motor. Once it fails, gear oil weeps out at the hub and dirt works into the planetary reduction, so you end up topping off gear oil repeatedly while the track loses drive strength. Packed debris around the motor from an uncleaned undercarriage is the usual trigger, pushing the seal out of place. Catching it early - oil weeping at the sprocket face - saves the planetary gears and bearings; left alone it turns into a full final-drive rebuild.
What electrical or sensor gremlins come up most often on these machines?
Wiring harness insulation crumbling and flaking is the recurring complaint, especially on runs that sit near hydraulic lines and get oil-soaked - the insulation breaks down and shorts or opens follow. Connector corrosion is the other repeat offender: rubber-boot connectors let moisture in over the years, and pins or sockets corrode to the point of losing conductivity, which produces intermittent no-function complaints like the boom/stick/aux dropout noted above. Two smaller but frequently mentioned nuisances: hour meters that quit reading after only a few hundred hours, and an alternator that squeals with a charge light at startup until the engine's been revved a few times - usually a glazed belt or worn brushes rather than a dead alternator.
What should I check when looking at a used 308C CR?
Confirm hours against undercarriage condition - sprocket tooth shape and track slop should match the claimed hours, and welding or patch repairs on the boom or undercarriage signal harder use than the meter shows (and remember hour meters on these are known to fail early, so don't rely on the number alone). Check pin and bushing play at the boom, stick, and bucket, and look at cylinder rods for scoring or rust. Start the engine cold and watch for excessive cranking (glow plug circuit) and smoke. With the engine running, raise the boom, hold it, then shut the engine off and watch for drift - a fast drop points to cylinder seals or the boom drift reduction valve, both real repair items on this model. Check the center swivel/turntable area for leaks since that repair is costly. Walk the wiring harness for cracked, oil-soaked, or taped-over insulation. Because boom drift and hydraulic control affect safe operation, have your dealer verify cylinder and valve condition before putting the machine to work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 308C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.