Komatsuother(no series)
Komatsu WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG))
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu WF450-3-D (S/N 54001-UP, for Komatsu Hanomag) is a wheel-type landfill/waste compactor in the roughly 26,000 kg (57,320 lb) operating-weight class. It rides on the driveline and running gear of the contemporary Komatsu WA450-3/WA470-3 utility wheel loaders: a Komatsu SA6D125E-2 6-cylinder diesel rated near 194 kW (260 hp) gross at 2,200 rpm, 11.04 L displacement, about 1,050 Nm peak torque, and a full powershift transmission with 4 forward/4 reverse gears. In place of tires it carries front and rear sheepfoot-type compaction drums for driving over and crushing refuse, with a top travel speed of about 27.2 km/h (16.9 mph). Documented production centers on the early 2000s. This serial block was built at the Komatsu Hanomag plant in Hannover, Germany, and the WF450-3 loader-type family runs alongside a WF450T dozer-type sibling on a track-type-tractor chassis with a dozing blade, plus larger WF550-class compactors.
The loader-type WF450-3 shares its engine, transmission, axles, and hydraulic architecture with the WA450-3/WA470-3 loaders of the same era rather than using compactor-specific driveline parts, so major powertrain components stay interchangeable with that far more common loader family. The Hanomag/-D tag on this serial block marks it as the German-built or German-market production run; parts documentation treats it as the same physical spec set as the base WF450-3(S/N 54001-UP) rather than a mechanically distinct machine. That shared-platform approach is why this compactor still matters on the used and parts market decades after production ended: Komatsu's current waste-industry lineup is built around standard wheel loaders, dozers, and excavators rather than a dedicated WF-series compactor, so driveline parts for surviving units get cross-sourced from the WA450/470 loader parts network, while the wear items unique to this machine, the compaction drums, tips, and scraper bars, remain the harder parts to find and are what typically drives replacement or rebuild decisions.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) specifications
Engine
| Engine model | SA6D125E-2, 6-cylinder diesel |
| Gross power | 194 kW (260 hp) at 2,200 rpm |
| Displacement | 11.04 L (673.8 cu in) |
| Maximum torque | 1,050 Nm (774.5 lb-ft) |
Weights
| Operating weight | 26,000 kg (57,320 lb) |
Dimensions
| Overall length | 8.84 m (29.0 ft) |
| Height to cab top | 3.75 m (12.3 ft) |
| Wheelbase | 3.40 m (11.16 ft) |
| Ground clearance | 0.48 m (1.56 ft) |
| Front compaction drum | 1.32 m diameter x 0.85 m wide (52 in x 33.5 in) |
| Rear compaction drum width | 1.05 m (41.4 in) |
Performance
| Transmission | Full powershift, 4 forward / 4 reverse gears |
| Maximum travel speed | 27.2 km/h (16.9 mph) |
Service capacities (summary)
| Fuel tank | 340 L (89.9 US gal) |
| Hydraulic system | 160 L (42.3 US gal) |
| Engine oil | 38 L (10.1 US gal) |
| Cooling system | 68 L (18 US gal) |
| Transmission fluid | 60 L (15.9 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 38.2 L (10.1 US gal) | Komatsu Genuine EO engine oil. EO10W-30 in cold ambient conditions, EO15W-40 as the standard/warm-climate grade, selected per the OMM ambient-temperature chart. |
| Cooling system | 68.1 L (18.0 US gal) | Komatsu genuine permanent-type antifreeze coolant (ethylene-glycol base), mixed to the local minimum-temperature protection level. Use all-season/year-round concentration in freezing climates. |
| Fuel tank | 340.3 L (89.9 US gal) | ASTM D975 No. 2-D diesel fuel, cetane number 45 or higher. Switch to a No. 1-D or winter-blend diesel in cold ambient temperatures to prevent fuel waxing. |
| Transmission / powertrain (torque converter and powershift transmission) | 60.2 L (15.9 US gal) | Komatsu Genuine TO powertrain oil. TO10 (SAE 10W) for cold start/low ambient, TO30 (SAE 30) for standard warm-climate operation, per the ambient-temperature viscosity chart. |
| Hydraulic system (tank and circuit) | 160.1 L (42.3 US gal) | Komatsu Genuine HO46-HM hydraulic oil (ISO VG46). A lighter-viscosity hydraulic oil is recommended for cold-climate operation to maintain cold-start flow. |
| Axles / final drives, front and rear | Not published for this exact serial range/variant in available documentation — verify with a Komatsu dealer. | Komatsu Genuine AXO axle oil (SAE 80W, GL-5 gear spec) is the typical factory recommendation for this class of driven axle; confirm grade against the machine's own OMM chart. |
| Grease points (spec only) | n/a — service interval item, no refill capacity | Komatsu Genuine G2-LI multipurpose lithium EP2 grease (NLGI 2), the standard all-around chassis and pin grease for this machine class. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 10,000 h |
|
Servicing the WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) beyond the schedule
Predictive Maintenance & Fluid Analysis
KOWA-style oil sampling on engine, axle (TO30/AXO), hydraulic (HO46-HM), and transmission oil flags abrasive landfill grit before it reaches the SA6D125E-2 bearings, powershift clutches, or compaction-wheel hub seals. This mechanically governed engine has no ECM datalogging, so scheduled sampling plus fuel water-separator and coolant checks are the main early-warning tools. Track hydraulic filter delta-pressure and transmission oil temperature trends closely; refuse leachate and fine debris contaminate fluids faster here than on a standard WA450-3/470-3 loader in normal dirt-and-rock duty.
Corrective & Common Repairs
Expect frequent compaction-wheel tip and scraper-bar wear from refuse abrasion, packed radiator and oil-cooler fins from wind-blown debris, and worn wheel-drum hub seals letting grit into the bearings. Harness connectors corrode from leachate exposure; check wiring at the E00-E03 monitor panel routing points first on any electrical fault. Powershift clutch modulation and articulation-pin wear surface earlier than on a standard WA470-3 loader, since this chassis runs constant low-speed, high-load compaction cycles it wasn't originally sized for.
Overhaul & Rebuild Points
Major rebuild points mirror the WA450-3/470-3 driveline: SA6D125E-2 inframe overhaul (liners, pistons, injectors) once oil consumption or blow-by trends up; powershift transmission and torque converter rebuild when clutch modulation or stall speed drifts; front and rear compaction-wheel drum reman or re-tip once the wrapper wall thins past hard-facing limits. Axle and final-drive housings and wheel-drum hub bearings warrant inspection at every driveline teardown, since the abrasive, high-cycle compaction load this platform sees exceeds typical loader duty.
Seasonal & Environment Servicing
Landfill duty exposes the WF450-3-D to combustible gas, corrosive leachate, and fine dust year-round; clean radiator and oil-cooler fins more often than the base interval, and keep fire-extinguisher and guard-screen checks current given the elevated heat-and-debris fire risk. In cold climates, verify coolant freeze protection and battery/glow-plug condition before cold starts. In hot or humid sites, watch engine and hydraulic oil temperatures closely, since packed cooling fins raise operating heat faster on a compaction-wheel machine than on a wheeled loader.
WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 41K-07-H7040 | Filter,Air | Air intake service | Check fitment → |
| 09637-30161 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 09637-30163 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 600-211-1310 | Plate? Instruction,Oil Filter | Lubrication service | Check fitment → |
| 07063-01142 | Element, Filter - Hydraulic Tank | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E00 | Action code for a mistaken switch or lever operation, shown on the monitor character display. | Control lever or switch operated out of the correct sequence or in an invalid machine state (e.g. wrong travel-direction/gear combination). | Release the control and repeat the operation in the correct sequence per the operator manual; no repair required if the code clears. |
| E01 | Action code indicating a scheduled inspection or maintenance item is due (wear-part check, fluid level check). | Service interval reached or a check item (coolant, oil, filters) needs operator verification. | Check the item referenced on the monitor caution lamp (fluid levels, filters) and service as needed; clear after inspection. |
| E02 | Caution-level action code for coolant or lubricating-oil overheating, paired with the central warning lamp, an individual caution lamp, and the buzzer. | Radiator/oil cooler restriction, low coolant, worn fan belt, or overload pushing coolant or torque converter oil temperature above normal range. | Reduce load, idle the engine, check coolant level and radiator/cooler fins for clogging once safe to inspect; do not continue heavy work until temperature normalizes. |
| E03 | Emergency-stop action code for a serious failure affecting normal machine operation or an incorrect setting; central warning lamp, caution lamp, and buzzer activate together. | Critical fault such as loss of engine oil pressure, brake system pressure loss, or another condition the monitor treats as machine-damaging if ignored. | Stop the machine safely, shut down the engine, identify the lit caution lamp, and do not resume operation until the fault is corrected and verified. |
| Coolant level lamp (no numeric code) | Pictogram warning lamp for low coolant level in the radiator sub-tank, flashes with the central CHECK lamp. | Coolant lost through leakage, evaporation, or normal top-up neglected at the sub-tank between FULL and LOW marks. | Stop and check the coolant sub-tank; top up through the filler and inspect for leaks if level drops repeatedly. |
| Engine oil pressure lamp (no numeric code) | Pictogram warning lamp for engine lubricating-oil pressure dropping below the normal operating minimum. | Low oil level, failing oil pump, clogged oil filter, or worn bearings reducing oil pressure. | Shut the engine down immediately, check oil level and filter condition; do not restart until the cause is found, continued running risks engine damage. |
| Torque converter oil temperature lamp (no numeric code) | Pictogram warning lamp for torque converter oil overheating, tied to the E02 caution category. | Sustained high-load, low-speed operation (typical of compactor duty), low torque converter oil level, or a clogged torque converter oil cooler. | Reduce load or idle to let temperature drop, check torque converter oil level and cooler fins for debris/clogging. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) attachments & work tools
Front push/dozer blade
This wheel-type landfill compactor (loader-derived chassis, not the tractor-type WF450T variant) carries a fixed, hydraulically raised/lowered push blade in place of a bucket, used to spread and rough-grade refuse ahead of the compaction pass. The blade is pin-mounted to the front frame/arms rather than fitted through a bucket-style quick coupler.
Compaction (sheepfoot-type) wheels, front and rear
Standard work tool for this class is a set of steel wheels fitted with wedge-shaped crushing/compaction teeth instead of tires, which shred and knead waste as the machine tracks over it. Front wheel measures roughly 132 cm (52 in) diameter by 85 cm (33.5 in) width; rear wheel is about 105 cm (41.4 in) wide, matching the class-typical sizing for this weight/power bracket.
Wheel scraper bars
Fixed scraper/cleaner bars at the front and rear wheel housings clear packed refuse from between the compaction teeth so the wheels stay self-cleaning during continuous landfill duty. This is factory-standard equipment on this compactor family, not an optional add-on.
Axle and underbody guarding
Protected, sealed axles and bolt-on belly/skid guards shield the drivetrain, differential, and hydraulic lines from punctures and debris ingestion typical of landfill work. Sealed wheel hubs limit refuse and grit intrusion into bearings and reduce the need for frequent seal service.
Cab and cooling guarding
A ROPS-type cab is the base protection, commonly specified with screen guarding over glazing and a shielded radiator/cooling-package intake to resist debris strikes and blockage from wind-blown refuse. Exact guard-kit content and coverage varies by configuration and market.
PTO-fed hydraulics for blade/work equipment
The transmission includes a power-take-off (P.T.O.) section that feeds the blade-lift hydraulic circuit, driven off the same engine/transmission package used on the machine's wheel-loader-based driveline. No separate implement-pump kit is documented for this serial range.
Shared driveline components with the WA450-3/WA470-3 wheel-loader platform
Hydraulic pump and transmission assemblies for this compactor cross-reference directly to the WA450-3 and WA470-3 wheel loaders, confirming the machine is built on that loader chassis and driveline rather than a purpose-built compactor undercarriage. This affects which driveline-side service kits and pump assemblies apply, though it is not an attachment in itself.
All WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) assemblies by section
Every catalogued assembly group for the Komatsu WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Accessory And Tool
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Accessory And Tool : Fire Extinguisher(#54101-)
| 01***16 | Bolt, Mounting Transmission Control Switch | 2 |
| 42***10 | Extinguisher,Fire | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Accessory And Tool : Spare Parts (Kohag)(#54101-)
| 04***68 | V-Belt Set,(Tropical Sandy? Dusty Spec.) | 1 |
| 07***75 | O-Ring (Kit) | 2 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Accessory And Tool : Tool (Kohag)(#54101-)
| 07***59 | Clamp - Drain Hose | 1 |
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
Cooling System
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Cooling Line (Steering And Radiator Hose Piping)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 7 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Cooling Line (Transmission Piping Mounting)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Radiator (Drain Line)
| 01***75 | Bolt (M10-1.50x75) | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 3 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Radiator (Radiator Mounting)
| 01***90 | Screw | 2 |
| 01***30 | Bolt, Mounting - Front Hand Rails | 2 |
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Radiator (Radiator Parts)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***30 | Bolt,(With Body Positioner) | 84 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Radiator (Radiator Parts)(#54101-)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***30 | Bolt,(With Body Positioner) | 84 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Radiator (Radiator Piping)
| 01***90 | Screw | 2 |
| 07***75 | O-Ring,Cylinder Head | 1 |
| 07***90 | Hose (32.5 In Long) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Radiator (Steering Oil Cooler Line)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Radiator (Transmission Oil Cooler Line)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***09 | Nut, Lock | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Radiator (Transmission Oil Cooler Line)(#54101-)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***09 | Nut, Lock | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Cooling System : Radiator Fan Guard Seal(#54101-)
| 01***16 | Bolt - Starting Motor Ground Cable | 12 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 12 |
| 41***70 | Plate,L.H | 1 |
Electrical System
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Battery (Large Capacity)(#54101-)
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
| 69***60 | Battery (195g51),(Large Capacity Type) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Battery Box (Electrical Battery Line) (Kohag)(#54101-)
| 01***35 | Bolt, Mount Bracket To Floor | 1 |
| 01***08 | Nut,See Fig. K4010-04a0 | 1 |
| 04***00 | Adapter Sleeves | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Battery Box (Rear Bumper And Battery Mounting) (Kohag)(#54101-)
| 01***90 | Bolt (Kit) | 4 |
| 01***08 | Screw, Terminal | 6 |
| 01***10 | Screw,(For Lighter) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Beacon Lamp (Kohag)(#54101-)
| 01***20 | Screw | 3 |
| 41***10 | Harness | 1 |
| 42***50 | Grommet | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Electrical Instrument (Starter Switch And Wiper Switch) (Kohag)(#54101-)
| 01***08 | Screw - Holder | 6 |
| 01***20 | Screw | 4 |
| 01***13 | Washer,Spring(For Wiper Switch Earth) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Horn
| 01***25 | Bolt - Relay Mounting | 4 |
| 42***10 | Horn Assembly | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Light And Mounting (Head Lamp Less Plate)
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 6 |
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 14 |
| 42***30 | Plate | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Roof Lamp(#54101-)
| 08***34 | Tie, Cable | 16 |
| 41***20 | Bulb,Filament | 2 |
| 41***00 | Harness | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Wiring Harness (Battery Line) (Kohag)(#54101-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 7 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Wiring Harness (Front Frame Line)
| 01***16 | Bolt - Starting Motor Ground Cable | 11 |
| 04***10 | Clip,(With Accumulator) | 5 |
| 04***10 | Clip,(With Accumulator) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Wiring Harness (Rear Frame Line)
| 01***16 | Bolt - Starting Motor Ground Cable | 15 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***55 | Bolt, Mount Dryer To Bracket And Frame | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Electrical System : Wiring Harness (Slow Blow Fuse And Battery Line) (Kohag)(#54101-)
| 01***08 | Screw, Terminal | 2 |
| 01***20 | Screw (Not Illustrated) | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 2 |
Engine Related Parts
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Engine Related Parts : Engine (Drain Hose Mounting)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 08***36 | Tie, Cable | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Engine Related Parts : Engine (Electrical Engine Harness)
| 01***25 | Bolt, Pinlock | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 14 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Engine Related Parts : Engine (Hose Parts)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 04***10 | Clip,(For Mono Lever Steering) | 2 |
| 07***67 | Clamp, Hose | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Engine Related Parts : Engine Mounting
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
| 01***40 | Screw | 2 |
| 01***50 | Screw | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Engine Related Parts : Exhaust Pipe
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 4 |
| 12***40 | Washer,(Without Canopy) | 4 |
| 42***10 | Pipe,Exhaust | 1 |
Fuel Tank And Related Parts
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Fuel Tank And Related Parts : Fuel Line
| 01***16 | Bolt - Starting Motor Ground Cable | 3 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 9 |
| 04***10 | Clip,(With Accumulator) | 9 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Fuel Tank And Related Parts : Fuel Tank (Cover And Breather Hose Piping)
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***45 | Bolt, Mounting Cranking Motor | 3 |
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Fuel Tank And Related Parts : Fuel Tank (Sensor And Fuel Piping) (Kohag)(#54101-)
| 01***45 | Bolt,L.H | 11 |
| 01***16 | Bolt - Starting Motor Ground Cable | 3 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 12 |
Guard
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Back-Up Alarm(#54101-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 08***92 | Connector,(For Mechanical Governor) | 1 |
| 41***00 | Alarm,Back-Up | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (Accumulator Charge Valve Drain Line)
| 07***34 | O-Ring,(For Without Brake Assistor) | 1 |
| 07***17 | Hose (Op) | 1 |
| 07***22 | Elbow,(For Russian) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (Accumulator Charge Valve To Accumulator Piping)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***40 | Bolt,(Shim 3-Piece) | 3 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (Accumulator Charge Valve To P.P.C. Valve Piping)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (Accumulator Charge Valve)
| 07***11 | O-Ring,(Tm8202-009) | 1 |
| 07***14 | O-Ring,(Without Maintenance Monitor) | 1 |
| 07***18 | O-Ring | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (Accumulator To Single Brake Valve)
| 07***34 | O-Ring,(For Without Brake Assistor) | 1 |
| 07***21 | Hose Assembly | 1 |
| 42***60 | Elbow Nipple | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (Bulkhead Harness)
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 04***10 | Clip,(With Accumulator) | 4 |
| 04***10 | Clip,(With Accumulator) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (Emergency Parking Brake Release Line)
| 01***16 | Bolt, Mount Solenoid Valve | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 04***10 | Clip,See Fig. K4010-17a0 | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (Kohag)(#54101-)
| 01***80 | Capscrew | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 5 |
| 01***16 | Bolt - Starting Motor Ground Cable | 10 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (P.P.C. Pump To Accumulator Charge Valve Piping)
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***90 | Bolt,(For Large Fan) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Bulkhead (Radiator Reserve Tank)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Cover (For Floor Frame)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 11 |
| 41***11 | Cover,R.H | 1 |
| 42***31 | Cover | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Hood (Engine Hood And Mounting Parts)(#54101-)
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 04***15 | Pin,Cotter (Itl) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Hood (Engine Hood Mounting Parts)(#54101-)
| 01***85 | Screw | 4 |
| 01***45 | Bolt,(Noise Abatement Part) | 3 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Hood (Engine Hood Seal)(#54101-)
| 41***90 | Seal | 1 |
| 42***53 | Finisher,Door | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Hood (Hood Door)(#54101-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 4 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 20 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Hood (Pre Cleaner)(#54101-)
| 01***35 | Bolt, Mount Bracket To Floor | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
| 01***08 | Nut,See Fig. K4010-04a0 | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Hood (Rear Guard Harness)(#54101-)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 08***10 | Connector, Clip | 1 |
| 42***21 | Wiring Harness, Rear Guard | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Hood (Side Door Seal)(#54101-)
| 42***60 | Seal,Door? L.H | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Hood (Upper Cover)(#54101-)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 42***10 | Cover | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Ladder Rail (Grease Box And Tool Box)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Ladder Rail (Kohag)(#54101-)
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 6 |
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 9 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 9 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Mirror
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 8 |
| 04***32 | Adapter Sleeves | 2 |
| 36***50 | Cap, Bolt | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Radiator Guard (Rear Duct) (Kohag)(#54101-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***35 | Bolt | 4 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Radiator Guard (Rear Work Lamp And Harness) (Kohag)(#54101-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***08 | Nut,See Fig. K4010-04a0 | 2 |
| 04***10 | Clip,(With Accumulator) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Guard : Rear Fender And Ladder (Kohag)(#54101-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt,(With Rops) | 8 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 12 |
Hydraulic System
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (Control And Cut-Off Valve Drain Line)
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 2 |
| 01***60 | Bolt - Upper Cooler Inlet Tubemounting | 2 |
| 01***70 | Bolt,(For 75a Alternator) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (Delivery Line Hose)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***38 | O-Ring, (Without Emergency Steering) | 2 |
| 07***15 | Hose | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (Drain Line Hose)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***48 | O-Ring, (Without Emergency Steering) | 2 |
| 07***16 | Hose | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (Dump Cylinder Line)
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
| 01***45 | Bolt, Bracket Mounting | 4 |
| 01***11 | Nut,(With Under Mirror) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (Lift Cylinder Line)
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 2 |
| 01***45 | Bolt, Bracket Mounting | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (P.P.C. Valve Line And Drain Line Mounting)
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (P.P.C. Valve Line And Drain Line Piping)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 1 |
| 07***08 | Plug,See Fig. K4010-63a0 | 2 |
| 07***80 | Hose,Over Flow | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (P.P.C. Valve Line And Pilot Line Mounting)
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
| 01***45 | Bolt, Bracket Mounting | 2 |
| 01***50 | Bolt,(See Fig.A4010-C3w6) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (P.P.C. Valve Line Mounting Plate)
| 42***50 | Bracket | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (Steering Oil Cooler Line)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 1 |
| 01***45 | Bolt, Bracket Mounting | 4 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (Steering Pump Line Hose)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 2 |
| 07***14 | Hose Assembly | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Piping (Switch Pump To Cut-Off Valve Line)
| 01***20 | Capscrew | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Pump (Brake Oil Line And Delivery Line)
| 01***40 | Screw, Hex Socket | 2 |
| 01***50 | Capscrew | 2 |
| 01***75 | Bolt - Cab To Rops | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Pump (Hydraulic Pump Line Mounting)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Pump (Hydraulic Pump Mounting)
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
| 07***30 | O-Ring,Housing | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Pump (Steering Pump And Switch Pump Line)
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Pump (Suction Line And Pump Line Mounting)
| 07***60 | O-Ring,(F4350-59a0 -6 ) | 1 |
| 07***75 | O-Ring,Cylinder Head | 1 |
| 07***23 | Hose | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Tank (Hydraulic Tank) (Kohag)(#54101-)
| 01***35 | Bolt,(With Rops) | 2 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
| 01***45 | Bolt,(For 60ton Dump Body) | 3 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Tank (P.P.C Valve And Brake Valve Drain Line)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
| 01***50 | Bolt,(See Fig.A4010-C3w6) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Hydraulic Tank (Steering? Suction And Drain Line)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 2 |
| 01***40 | Bolt,(For Operator'S Cab) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Loader Control Valve (Control Valve Mounting Parts)
| 01***70 | Bolt,(With Wear Guard) | 4 |
| 01***80 | Screw | 2 |
| 01***05 | Screw | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Loader Control Valve (P.P.C. Valve Line Connecting Parts)
| 07***34 | O-Ring,(For Without Brake Assistor) | 2 |
| 07***08 | Plug,See Fig. K4010-63a0 | 2 |
| 42***50 | Elbow | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Steering Hydraulic Line (Steering Cylinder Line Mounting)
| 01***50 | Bolt,(See Fig.A4010-C3w6) | 4 |
| 01***09 | Nut,(For Japan) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Steering Hydraulic Line (Steering Valve Line Mounting)
| 01***45 | Bolt, Bracket Mounting | 2 |
| 01***09 | Nut,(For Japan) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Steering Hydraulic Line (Switch Pump To Cut-Off Valve Line)
| 01***90 | Capscrew | 1 |
| 01***05 | Capscrew | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Steering Valve (Steering Demand Valve Inner Parts)
| 07***08 | Plug,(Without Lock-Up), Plug | 1 |
| 42***70 | O-Ring | 2 |
| 42***80 | Spring | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Hydraulic System : Steering Valve (Steering Demand Valve Mounting) (Kohag)(#54101-)
| 01***05 | Capscrew | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 42***10 | Bracket | 1 |
Main/Revolving Frame And Related Parts
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Front Frame (Kohag)(#54101-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,Machine Model (For Ec Reg.) | 1 |
| 41***00 | Frame | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Front Scraper(#54101-)
| 01***95 | Screw | 24 |
| 01***85 | Bolt | 8 |
| 41***20 | Washer | 24 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Hinge Pin
| 01***30 | Screw | 1 |
| 01***95 | Screw | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 10 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Frame Cover)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Front Brake Cover)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***35 | Capscrew - M14 (1)/(2) | 32 |
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Front Frame Cover)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 42***20 | Guard | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Lift Cylinder Cover)(#54001-54121)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 28 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 18 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Lift Cylinder Cover)(#54122-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 26 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 20 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Lock Bar And Frame Cover) (Kohag)(#54101-)
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 4 |
| 01***32 | Washer | 4 |
| 41***70 | Spacer | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Rear Frame Cover)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Under Guard? Front Frame)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***75 | Capscrew | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Under Guard? Rear Frame)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Lock And Cover (Under Guard? Sheet) (Kohag)(#54101-)
| 41***20 | Sheet | 1 |
| 41***30 | Sheet | 1 |
| 41***40 | Sheet | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Rear Axle Support
| 01***65 | Bolt - Battery Box | 16 |
| 01***90 | Screw | 4 |
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Rear Frame (Kohag)(#54101-)
| 41***20 | Frame Rear Seat | 1 |
| 41***21 | Frame Rear Seat | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Rear Frame (Shaft Guard And Transmission Mounting)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
| 01***80 | Screw | 4 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Rear Frame (Sheet) (Kohag)(#54101-)
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Rear Frame (With Joy Stick Steering) (Kohag)(#54101-)
| 41***20 | Frame,Rear | 1 |
| 41***21 | Frame,Rear | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Rear Scraper(#54101-)
| 01***95 | Screw | 24 |
| 01***85 | Bolt | 20 |
| 41***20 | Washer | 24 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Remote Grease (Fitting And Plug)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 3 |
| 07***08 | Plug,(D65ex?Px) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Remote Grease (Rear Axle Support)
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 04***10 | Clip - Fuel Sensor Harness | 10 |
| 41***40 | Tube | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Remote Grease (Steering Cylinder)
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
| 04***10 | Clip - Fuel Sensor Harness | 6 |
| 42***40 | Elbow,(With Auto Grease System) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Remote Grease (Work Equipment)
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
| 04***10 | Clip - Fuel Sensor Harness | 5 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Steering Cylinder (Hydraulic Steering Cylinder Line)(#54101-)
| 07***05 | Hose, Lift Cyl Bottom Tube To Valve | 4 |
| (7***0) | Cylinder Group,Steering? R.H | 1 |
| (7***0) | Cylinder Group,Steering? L.H | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Main/Revolving Frame And Related Parts : Steering Cylinder (Mounting Pin)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 07***08 | Plug,(Without Oil Pressure Switch) | 2 |
| 17***70 | Washer (Isolator Mounting) | 4 |
Marks And Plates
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Marks And Plates : Marks And Plates (Kohag)(#54101-)
| 09***60 | Decal, Komatsu (Black Lettering) (Behind Driver'S Door) | 2 |
| 09***81 | Plate? Safety,Hazard0us Voltage Warning | 1 |
| 41***10 | Plate? Name,Lifting (Not Shown) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Marks And Plates : Marks And Plates(#54001-54099)
| 09***80 | Plate? Safety,Without E.S.Cover (Except Ec) | 2 |
| 09***80 | Plate, Caution, Keep A Safe Distance | 2 |
| 09***80 | Plate, Safety - Lift Arm | 2 |
Operator'S Compartment And Control System
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Accelerator Pedal
| 01***16 | Bolt - Box Mounting | 2 |
| 01***70 | Screw | 1 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Accelerator Pedal And Linkage
| 01***20 | Bolt,See Fig. K4010-11a0 | 3 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner (Air Compressor)
| 42***80 | Air Compressor Assembly, A-Type | 1 |
| ND***70 | Clamp, Tapping | 1 |
| ND***00 | Washer? 0.3mm,Plate? Sk | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner (Air Conditioner Kit)
| 01***20 | Bolt,See Fig. K4010-11a0 | 2 |
| 20***20 | Receiver Tank, Receiver | 1 |
| 42***90 | Cap | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner (Air Conditioner Unit)
| 42***11 | Air Conditioner U.,See Fig. K4010-15a0 | 1 |
| ND***40 | Pipe,See Fig. K4010-15a0 | 1 |
| ND***20 | Clamp,See Fig. K4010-15a0 | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner (Air Duct)
| 42***52 | Duct Assembly, Air | 2 |
| ND***20 | Screw With Washer, Tapping | 2 |
| ND***80 | Screw With Washer, Tapping | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner (Condenser)
| 42***30 | Condenser Assembly | 2 |
| ND***30 | Nut | 6 |
| ND***12 | Fan | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner (Damper)
| ND***10 | Damper Ass'Y,See Fig. K4010-13a0 | 1 |
| ND***20 | Knob,See Fig. K4010-13a0 | 2 |
| ND***80 | Lever,See Fig. K4010-13a0 | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner (Filter Box)
| 01***40 | Bolt? Wing,See Fig. K4010-12a0 | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 12 |
| 01***10 | Washer,See Fig. K4010-12a0 | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner And Duct
| 01***12 | Screw,(Not Shown) (For Std Cab) | 4 |
| 01***12 | Bolt,(See Fig. K0210-16a0) | 4 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner And Heater Cover (Console Box Related Parts)
| 23***30 | Seal, Door | 1 |
| 42***30 | Finisher | 1 |
| 42***30 | Gasket | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner And Heater Cover (Rear Console Box) (Kohag)(#54101-)
| 01***16 | Screw, Sems | 2 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 5 |
| 01***12 | Bolt,(With Speedometer) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner Mounting And Piping (Air Compressor Mounting)
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner Mounting And Piping (Air Compressor Piping)
| 01***10 | Bolt - Relay And Flasher Mounting | 2 |
| 01***25 | Screw | 2 |
| 01***30 | Bolt,See Fig. K4010-17a0 | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner Mounting And Piping (Condenser Mounting)
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 8 |
| 01***11 | Nut,(With Under Mirror) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Conditioner Mounting And Piping (Electrical System)
| 01***12 | Bolt,(See Fig. K0210-16a0) | 8 |
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 08***36 | Tie, Cable | 7 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Air Suction Hose (Kohag)(#54101-)
| 01***25 | Bolt? Wing | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
| 01***08 | Washer,(For Mounting First Aid Kit) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Brake Control (Accumulator To Brake Valve Piping)
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Brake Control (Brake Valve To Slack Adjuster)
| 01***16 | Bolt - Starting Motor Ground Cable | 7 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
| 01***35 | Bolt, Mount Bracket To Floor | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Brake Control (Single Brake Valve)
| 01***20 | Screw | 1 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 4 |
| 01***40 | Bolt,See Fig. K4010-64a0 | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Brake Control (Tandem Brake Valve)
| 01***20 | Screw | 1 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 4 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 3 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Brake Piping (Front Brake Line)
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 4 |
| 01***35 | Bolt, Mount Bracket To Floor | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Brake Piping (Rear Brake Line)
| 01***16 | Bolt - Starting Motor Ground Cable | 7 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 9 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Brake Piping (Slack Adjuster)
| 07***08 | Plug,(Without Lock-Up), Plug | 2 |
| 42***01 | Adjuster Assembly - Wheel Brake Slack | 1 |
| 42***20 | Piston | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Cool And Heater Box(#54101-)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 07***89 | Clamp,(D31s) | 2 |
| 42***10 | Stud | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Floor (Floor Frame)
| 01***12 | Screw,Sems | 1 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
| 08***11 | Spring Clip | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Floor (Foot Rest)
| 01***20 | Bolt,See Fig. K4010-11a0 | 3 |
| 42***20 | Plate | 1 |
| 42***21 | Foot Rest,Foot | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Floor (Joy Stick Steering System) (Kohag)(#54101-)
| 01***10 | Screw,(For Wiper Switch Earth) | 2 |
| 01***16 | Screw, Mount Parking Lights | 2 |
| 01***04 | Nut,(For Air Conditioner Less) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Floor (P.P.C. Valve Line)
| 01***20 | Bolt,(Forwarded Individually Parts) | 3 |
| 01***35 | Bolt, Mount Bracket To Floor | 6 |
| 07***18 | O-Ring, Divider Valve Mounting | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Floor (R.H. Console Box) (Kohag)(#54101-)
| 01***16 | Screw,(For Joy Stick Steering) | 5 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Floor Mat
| 41***81 | Mat,Floor | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Floor Support
| 01***50 | Bolt,(For Large Size Tire) | 20 |
| 01***65 | Bolt,(Without Rops) | 8 |
| 01***24 | Nut | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Gauge And Sensor (Main Monitor) (Kohag)(#54101-)
| 01***12 | Screw,(With Articulate Indicator) | 8 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 8 |
| (7***0) | Monitor Ass'Y,Main | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Heater Piping
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***10 | Bolt - Relay And Flasher Mounting | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Loader Control (Work Equipment Control Lever) (Mono Lever Type) (Kohag)(#54101-)
| 01***16 | Screw,(For Joy Stick Steering) | 4 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 8 |
| 01***16 | Bolt - Starting Motor Ground Cable | 3 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Loader Control (Work Equipment Control Lever) (Mono Lever Type)(#54101-)
| 01***30 | Screw, Mounting | 1 |
| 01***12 | Bolt,(See Fig. K0210-16a0) | 1 |
| 01***25 | Bolt - Relay Mounting | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Loader Control (Work Equipment Control Linkage And Bracket) (Mono Lever Type) (Kohag)(#54101-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 4 |
| 04***16 | Pin, Spring | 1 |
| 42***40 | Shaft | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Loader Control (Work Equipment Control Linkage) (Mono Lever Type)(Kohag)(#54101-)
| 01***03 | Nut, L. H. Thread | 4 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 4 |
| 01***07 | Nut,(With Body Positioner) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Loader Control (Work Equipment Lock Lever) (Mono Lever Type) (Kohag)(#54101-)
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
| 04***20 | Pin, Spring Retainer | 2 |
| 09***00 | Knob,Lock Lever | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Main Monitor (Inner Parts) (Kohag)(#54101-)
| 78***10 | Bulb - 1.4 Watt | 9 |
| 78***00 | Screw | 12 |
| 78***00 | Panel | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Maintenance Monitor (Inner Parts) (Kohag)(#54101-)
| 01***10 | Washer,(Except Japan) | 12 |
| 01***05 | Washer,(Except Japan) | 12 |
| 08***03 | Bulb? 3w,Turn Signal Lamp | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Marks And Plates (Cab Inside) (Kohag)(#54101-)
| 09***01 | Plate? Operating,Work Equipment Lever | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Operator'S Seat (Air Suspension Type) (Kohag)(#54101-)
| 01***40 | Bolt,(For Position Fixing) | 2 |
| 01***10 | Bolt - Relay And Flasher Mounting | 3 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Protective Ventilation Filter (Kohag)(#54101-)
| 41***40 | Filter,Air | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Protective Ventilation System (Kohag)(#54101-)
| 01***25 | Screw | 2 |
| 01***14 | Bolt,(W/Joy Stick Str.)(W/O Heater) | 4 |
| 01***16 | Bolt, Mount Solenoid Valve | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Radio And Cassette? Am/Fm(#54101-)
| 01***10 | Screw | 4 |
| 08***00 | Fuse, Radio 1a | 1 |
| 08***00 | Fuse? 5a,(Mk-Ful-5) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Roof Rail(#54101-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 41***00 | Rail,Roof | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (1/3) (Interior Trim)
| 42***10 | Screw,(With Washer) | 6 |
| 42***40 | Screw | 2 |
| 42***90 | Cover | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (2/3) (Interior Trim)
| 42***10 | Screw,(With Washer) | 7 |
| 42***80 | Cover, Wiper Motor - L.H | 1 |
| 42***90 | Cover, Wiper Motor - R.H | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (3/3) (Interior Trim) (Kohag)(#54101-)
| 01***16 | Screw | 4 |
| 01***12 | Screw | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Antenna And Speaker)(#54101-)
| 01***20 | Screw (Not Illustrated) | 8 |
| 01***12 | Screw,(Without Ashtray) | 2 |
| 08***36 | Tie, Cable | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Cap And Door Lock) (Kohag)(#54101-)
| 01***25 | Bolt,(Rear Attachment Less) | 12 |
| 01***10 | Screw,(For Shipping) | 4 |
| 01***20 | Screw | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Cigar Lighter And Radio Bracket)
| 01***10 | Bolt - Relay And Flasher Mounting | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 6 |
| 01***18 | Washer,Spring | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Door Lock? L.H.)
| 01***12 | Screw | 8 |
| 01***16 | Screw | 1 |
| 01***12 | Bolt,(See Fig. K0210-16a0) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Door Lock? R.H.)
| 01***12 | Screw | 8 |
| 01***16 | Screw | 1 |
| 01***12 | Bolt,(See Fig. K0210-16a0) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Door Related Parts? L.H.)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***14 | Screw | 1 |
| 01***12 | Screw | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Door Related Parts? R.H.)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***12 | Screw | 1 |
| 01***12 | Screw | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Door? L.H.) (Kohag)(#54101-)
| 01***12 | Screw | 2 |
| 01***06 | Screw (Op) | 2 |
| 01***08 | Screw | 7 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Door? R.H.) (Kohag)(#54101-)
| 01***12 | Screw | 2 |
| 01***06 | Screw (Op) | 2 |
| 01***08 | Screw | 7 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Electrical System Mounting Parts)
| 01***10 | Screw | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 08***10 | Clamp | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Electrical System) (Kohag)(#54101-)
| 01***12 | Screw | 10 |
| 01***12 | Screw | 2 |
| 01***16 | Screw | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Front Interior Cover)
| 42***10 | Screw,(With Washer) | 6 |
| 42***60 | Protective Strip | 1 |
| 42***11 | Cover, L.H | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Front Interior Trim) (Kohag)(#54101-)
| 01***10 | Plain Washer | 10 |
| 20***20 | Ashtray | 1 |
| 41***80 | Seal | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Front Wiper)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 08***10 | Connector, Clip | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Mounting Parts)
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***05 | Capscrew | 6 |
| 01***00 | Bolt (Op) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Plate Mark) (Kohag)(#54101-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Rops And Fops)(Ec Regulation) | 1 |
| 09***55 | Plate, Mark, Komatsu | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Rear Wiper)
| 01***16 | Screw, Mount Parking Lights | 1 |
| 01***12 | Bolt,(With Speedometer) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Seal)
| 07***42 | Plug,(Tractor Only With Hitch) | 2 |
| 42***70 | Seal, Front | 1 |
| 42***80 | Seal, Rear | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Window Washer)
| 01***16 | Screw | 2 |
| 07***65 | Tube, Washer | 1 |
| 08***08 | Grommet,(Without Beacon Lamp) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Window) (Kohag)(#54101-)
| 01***25 | Bolt? Wing | 2 |
| 01***08 | Washer,(For Mounting First Aid Kit) | 2 |
| 23***40 | Strip, Weather | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Rops Cab (Working Lamp) (Kohag)(#54101-)
| 01***20 | Bolt - Mount Risers To Cab Floor | 1 |
| 08***12 | Clip, Clip,(With Auto Emergency Steering) | 1 |
| 09***08 | Cap,(For Ripper Or Rear Hydraulic. Take) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Steering Wheel And Column (Dashboard) (Kohag)(#54101-)
| 01***30 | Bolt, Mounting - Front Hand Rails | 4 |
| 01***08 | Washer,(For Joy Stick Steering) | 5 |
| 42***40 | Rivet | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Steering Wheel And Column (Inner Parts) (Kohag)(#54101-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Capscrew | 2 |
| 01***12 | Bolt,(See Fig. K0210-16a0) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Steering Wheel And Column (Wheel And Column) (Kohag)(#54101-)
| 01***40 | Screw | 1 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 1 |
| 36***10 | Nut | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Transmission Control Switch (Kohag)(#54101-)
| 01***08 | Screw, Mount Damper To Shaft | 6 |
| 01***12 | Screw | 2 |
| 01***08 | Screw, Terminal | 10 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Washer Tank (Mounting Plate And Washer Hose) (Kohag)(#54101-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 4 |
| 08***10 | Clip,See Fig. K4010-06a0 | 4 |
| 41***10 | Bracket | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Washer Tank (Washer Tank And Pump Motor Harness) (Kohag)(#54101-)
| 01***16 | Screw | 2 |
| 01***25 | Screw | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Operator'S Compartment And Control System : Work Lamp(#54108-)
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
| 42***20 | Lens | 1 |
| 42***30 | Bulb? 70w,24v 70w | 1 |
Sa6d125e-2c-S Engine S/N 60721-Up
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : After Cooler Water Piping(#61589-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Air Cleaner (With Extention Pipe)(#61589-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***30 | Bolt,(With Body Positioner) | 3 |
| 01***55 | Bolt,(See Service News) | 3 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Air Cleaner Cap And Extention Pipe(#61589-80036)
| 56***00 | Cap,(With Weather Cap Type) | 1 |
| 61***50 | Extension,(With Weather Cap Type) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Air Cleaner Cap And Extention Pipe(#80037-)
| 56***00 | Cap,(With Weather Cap Type) | 1 |
| 61***50 | Extension,(With Weather Cap Type) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Air Cleaner(#61589-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***30 | Bolt,(With Body Positioner) | 3 |
| 01***55 | Bolt,(See Service News) | 3 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Air Intake Manifold And After Cooler(#61589-)
| 01***50 | Bolt,(With Service Valve R.H.) | 18 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 3 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Air Vent(#61589-71645)
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 12 |
| 07***10 | Screw, Banjo Connector (M10-1.25x20) | 6 |
| 61***60 | Tube,Air Vent | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Air Vent(#71646-75151)
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 12 |
| 07***10 | Screw, Banjo Connector (M10-1.25x20) | 6 |
| 61***60 | Tube,Air Vent | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Air Vent(#75152-)
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 12 |
| 07***10 | Screw, Banjo Connector (M10-1.25x20) | 6 |
| 61***60 | Tube,Air Vent | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Alternator (50a) (Inner Parts)(#61589-63561)
| 60***80 | Alternator A. (50a),(With Non Hardening Pulley) | 1 |
| SD***X0 | Pulley,Non Hardening | 1 |
| SD***X0 | Washer | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Alternator (50a) (Inner Parts)(#63562-83660)
| 60***30 | Alternator A. (50a),(With Non Hardening Pulley) | 1 |
| SD***X0 | Pulley,Non Hardening | 1 |
| SD***X0 | Coil Assembly | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Alternator (50a) (Inner Parts)(#83661-)
| 60***50 | Alternator A. (60a) | 1 |
| KD***70 | Bushing,Insulate | 1 |
| KD***40 | Bushing,Insulate | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Alternator (75a) (Inner Parts)
| 60***60 | Alternator A. (75a) | 1 |
| SD***X0 | Pulley,Non Hardening | 1 |
| SD***X0 | Coil Assembly | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Alternator Mounting (50a)(#61589-)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Alternator Mounting (75a)(#61589-)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Camfollower Cover(#61589-70945)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Camfollower Cover(#70946-71939)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Camfollower Cover(#71940-)
| 07***20 | Clamp, Spring Hose | 1 |
| 07***73 | Hose | 1 |
| 61***90 | O-Ring,Breather | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Camshaft(#60721-75757)
| 01***22 | Capscrew | 2 |
| 04***25 | Key, Plain Woodruff | 1 |
| 04***12 | Ring,Snap (For Ripper) | 12 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Camshaft(#75758-)
| 01***22 | Capscrew | 2 |
| 04***25 | Key, Plain Woodruff | 1 |
| 04***12 | Ring,Snap (For Ripper) | 12 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Caution Plate (German)(#80455-)
| 09***08 | Plate? Instruction,Air Cleaner | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Caution(#86077-)
| 60***80 | Plate? Instruction | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cooling Fan(#61589-)
| 01***30 | Bolt,(With Body Positioner) | 12 |
| 60***50 | Fan, Cooling | 1 |
| 61***30 | Holding Fixture | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Corrosion Resistor(#61589-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 02***25 | Bolt,(Cold Weather Spec.) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Crank Pulley
| 01***30 | Screw | 1 |
| 01***35 | Screw | 5 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Crankshaft
| 61***10 | Bearing, Main (Standard) | 7 |
| 61***50 | Bearing, Thrust Assembly (Standard) | 1 |
| 61***10 | Bearing, Main (1.00mm Undersize) | 7 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cylinder Block (1/2)(#61589-75757)
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
| 01***20 | Bolt,(For Shipping) | 1 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 14 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cylinder Block (2/2)(#61589-62335)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cylinder Block (2/2)(#62336-75757)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***40 | Bolt (Op) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cylinder Block Gasket Kit(#61589-)
| 07***20 | O-Ring,Relief Valve | 1 |
| 07***30 | Ring, Seal - Between Sections | 1 |
| 07***20 | O-Ring,Lubricating Oil Piping | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cylinder Block Related Parts(#75757-)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***40 | Bolt (Op) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cylinder Block(#75758-)
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
| 01***20 | Bolt,(For Shipping) | 1 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cylinder Head Gasket Kit(#61589-)
| 07***21 | O-Ring,Water Piping | 1 |
| 07***65 | O-Ring,Cylinder Block | 6 |
| 07***30 | O-Ring (K1) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cylinder Head(#60721-67603)
| 01***20 | Bolt (M10-1.75x120) | 6 |
| 04***20 | Pin,Dowel (Welded) | 2 |
| 07***08 | Plug,(Without Lock-Up), Plug | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Cylinder Head(#67604-)
| 01***20 | Bolt (M10-1.75x120) | 6 |
| 04***20 | Pin,Dowel (Welded) | 2 |
| 07***08 | Plug,(Without Lock-Up), Plug | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Damper
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 61***00 | Damper Assembly | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Engine Mounting(#61589-)
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
| 01***00 | Bolt,(For Front Brake Release) | 4 |
| 01***05 | Capscrew | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Engine Stop Motor(#61589-)
| 01***25 | Bolt,(For Shipping) | 1 |
| 01***30 | Screw | 2 |
| 01***22 | Screw | 3 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Exhaust Manifold(#61589-)
| 01***80 | Bolt, Mount Strainer Flange | 2 |
| 01***80 | Screw | 2 |
| 01***00 | Bolt (M10-1.50x100) | 16 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Exhaust Pipe(#74807-)
| 01***11 | Nut (M14-1.50 Thd), Nut; Was 01582-01411 | 2 |
| 61***20 | Clamp | 1 |
| 61***50 | Pipe,Exhaust | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fan Drive(#61589-62819)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***40 | Bolt (Op) | 2 |
| 01***95 | Capscrew | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fan Drive(#62820-)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***40 | Bolt (Op) | 2 |
| 01***95 | Capscrew | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fan Pulley(#61589-)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 04***69 | V-Belt Set,Fan | 1 |
| 61***20 | Pulley?Non Hardening | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Flywheel Housing (With Engine Revolution Sensor)(#61589-67517)
| 01***50 | Capscrew | 6 |
| 01***60 | Capscrew | 4 |
| 01***45 | Bolt, Divider Valve Mounting | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Flywheel Housing (With Engine Revolution Sensor)(#67518-)
| 01***50 | Capscrew | 6 |
| 01***60 | Capscrew | 4 |
| 01***45 | Bolt, Mount Divider Valve | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Flywheel Housing(#61589-67517)
| 01***50 | Capscrew | 6 |
| 01***60 | Capscrew | 4 |
| 01***45 | Bolt, Divider Valve Mounting | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Flywheel Housing(#67518-)
| 01***50 | Capscrew | 6 |
| 01***60 | Capscrew | 4 |
| 01***30 | Capscrew (1) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Flywheel(#61589-)
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Front Cover Mounting(#75758-)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 7 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 4 |
| 01***75 | Bolt (M10-1.50x75) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Front Cover(#61589-75757)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 8 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 4 |
| 01***75 | Bolt (M10-1.50x75) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Front Cover(#75758-)
| 09***50 | Liquid Gasket, Lg-7, 150g | 0 |
| 61***30 | Seal? Front (K2) | 1 |
| 61***40 | Cover, Front | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Filter
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***65 | Bolt | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Coupling) (Inner Parts)(#61589-70945)
| DK***00 | Bolt | 2 |
| DK***20 | Coupling Assembly | 1 |
| DK***00 | Bolt | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Coupling) (Inner Parts)(#70946-74800)
| DK***00 | Bolt | 2 |
| DK***20 | Coupling Assembly | 1 |
| DK***00 | Bolt | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Coupling) (Inner Parts)(#74801-)
| DK***00 | Bolt | 2 |
| DK***20 | Coupling Assembly | 1 |
| DK***00 | Bolt | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Feed Pump) (Inner Parts)(#61589-70945)
| DK***20 | Bolt, Joint | 1 |
| DK***00 | Valve,Check | 2 |
| DK***30 | Feed Pump Assembly | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Feed Pump) (Inner Parts)(#70946-74800)
| DK***20 | Bolt, Joint | 1 |
| DK***00 | Valve,Check | 2 |
| DK***30 | Feed Pump Assembly | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Feed Pump) (Inner Parts)(#74801-)
| DK***20 | Bolt, Joint | 1 |
| DK***00 | Valve,Check | 2 |
| DK***30 | Feed Pump Assembly | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Governor) (1/2) (Inner Parts)(#61589-70945)
| DK***00 | Gasket | 1 |
| DK***00 | Screw | 1 |
| DK***00 | Shim? 2.00mm,(High Altitude Spec.) | 0 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Governor) (1/2) (Inner Parts)(#70946-74800)
| DK***00 | Gasket | 1 |
| DK***00 | Screw | 1 |
| DK***00 | Shim? 2.00mm,(High Altitude Spec.) | 0 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Governor) (1/2) (Inner Parts)(#74801-)
| DK***00 | Gasket | 1 |
| DK***00 | Screw | 1 |
| DK***00 | Shim? 2.00mm,(High Altitude Spec.) | 0 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Governor) (2/2) (Inner Parts)(#61589-70945)
| DK***80 | Shim? 0.5mm | 0 |
| DK***00 | Washer,Spring | 1 |
| DK***80 | Bolt,Eye | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Governor) (2/2) (Inner Parts)(#70946-74800)
| DK***80 | Shim? 0.5mm | 0 |
| DK***00 | Washer,Spring | 1 |
| DK***80 | Bolt,Eye | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Governor) (2/2) (Inner Parts)(#74801-)
| DK***80 | Shim? 0.5mm | 0 |
| DK***00 | Washer,Spring | 1 |
| DK***80 | Bolt,Eye | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Pump) (1/2) (Inner Parts)(#61589-70945)
| 61***40 | Injection Pump Ass'Y | 1 |
| DK***30 | Bearing,Roller | 2 |
| DK***20 | Housing | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Pump) (1/2) (Inner Parts)(#70946-74800)
| 61***41 | Injection Pump Ass'Y | 1 |
| DK***30 | Bearing,Roller | 2 |
| DK***00 | Bearing, Center | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Pump) (1/2) (Inner Parts)(#74801-)
| 61***42 | Injection Pump Ass'Y | 1 |
| DK***30 | Bearing,Roller | 2 |
| DK***00 | Bearing, Center | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Pump) (2/2) (Inner Parts)(#61589-70945)
| DK***00 | Shim? 0.875mm | 0 |
| DK***00 | Shim? 0.500mm | 0 |
| DK***00 | Shim? 1.575mm | 0 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Pump) (2/2) (Inner Parts)(#70946-74800)
| DK***00 | Shim? 0.875mm | 0 |
| DK***00 | Shim? 0.500mm | 0 |
| DK***00 | Shim? 1.575mm | 0 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump (Pump) (2/2) (Inner Parts)(#74801-)
| DK***00 | Shim? 0.875mm | 0 |
| DK***00 | Shim? 0.500mm | 0 |
| DK***00 | Shim? 1.575mm | 0 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump Drive(#61589-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***14 | Nut (Itl) | 1 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump Mounting(#61589-70945)
| 01***90 | Bolt,(For No?1 And No?3 Housing) | 4 |
| 01***16 | Washer,(With Water Separator) | 4 |
| 07***10 | Connector, Grease Fitting | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump Mounting(#70946-)
| 01***90 | Bolt,(For No?1 And No?3 Housing) | 4 |
| 01***16 | Washer,(With Water Separator) | 4 |
| 07***10 | Connector, Grease Fitting | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Injection Pump Piping
| 01***30 | Screw | 4 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***45 | Bolt,(With Water Separator Type) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Fuel Return(#61589-)
| 07***16 | Tube,Spill (S6d110-1a? S6d110-1b) | 1 |
| 07***85 | Clip | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Head Cover(#61589-)
| 01***16 | Washer,Radio Controlled Slag Handling | 24 |
| 61***11 | Cover,Head? No.2?3?4?5?6 | 6 |
| 61***10 | Gasket,Cylinder Head Cover | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Heater Switch(#61589-)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***10 | Washer,(For 35a Alternator) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Idler Gear
| 01***60 | Capscrew | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 61***60 | Pin, Dowel | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Injection Nozzle
| 01***45 | Bolt, Mount Divider Valve | 12 |
| 07***65 | O-Ring,Cylinder Block | 6 |
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 12 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Muffler (For Water Separator)(#80412-81023)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 1 |
| 01***25 | Bolt,Joint | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Muffler (For Water Separator)(#81024-82013)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 1 |
| 01***25 | Bolt,Joint | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Muffler (For Water Separator)(#82014-)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 1 |
| 01***25 | Bolt,Joint | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Muffler(#61589-77645)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***40 | Bolt (Op) | 4 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Muffler(#77646-81023)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 1 |
| 01***25 | Bolt,Joint | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Muffler(#81024-82013)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 1 |
| 01***25 | Bolt,Joint | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Muffler(#82014-)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 1 |
| 01***25 | Bolt,Joint | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Name Plate And Caution (English)(#60863-81314)
| 09***61 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
| 09***01 | Plate? Instruction,(English) (Except Japan) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Name Plate And Caution (English)(#63534-81891)
| 09***08 | Plate? Instruction,Air Cleaner | 1 |
| 61***20 | Plate? Name,Engine (Limited Supply) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Name Plate And Caution (German)(#61589-81688)
| 09***05 | Plate? Instruction,(German) | 1 |
| 60***40 | Plate? Name,Engine (Limited Supply) | 1 |
| 61***90 | Plate | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Name Plate And Caution (German)(#81892-86272)
| 60***40 | Plate? Name,Engine (Limited Supply) | 1 |
| 61***90 | Plate | 1 |
| 61***81 | Plate,(Tbg Spec.) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Name Plate And Caution(#80915-)
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Nozzle Holder (Inner Parts)
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
| 61***52 | Bolt, Joint | 1 |
| 61***10 | Fuel Injector Assembly | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Adapter(#61589-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***30 | Bolt,(With Body Positioner) | 3 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Cooler Mounting Parts(#75758-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***80 | Bolt,(With Corrosion Resistor) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Cooler(#60721-75757)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***80 | Bolt,(With Corrosion Resistor) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Cooler(#75758-)
| 01***25 | Bolt - Relay Mounting | 2 |
| 07***42 | O-Ring,(See Fig.A3310) | 1 |
| 61***25 | Cover | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Filter(#61589-)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 02***16 | Plug | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Level Gauge(#61589-78286)
| 61***40 | Guide | 1 |
| 61***20 | Collar | 1 |
| 61***30 | Nut,(For Shipping) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Level Gauge(#78287-)
| 61***20 | Collar | 1 |
| 61***30 | Nut,(For Shipping) | 1 |
| 61***51 | Gauge, Oil Level | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Pan And Suction Tube(#61589-78286)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 30 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Pan And Suction Tube(#78287-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 30 |
| 01***30 | Bolt,(With Body Positioner) | 7 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Oil Pump
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Piston
| 02***13 | Pin, Dowel | 2 |
| 04***18 | Ring, Snap | 12 |
| 61***30 | Bushing,(Service Part) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Rocker Arm(#60721-75757)
| 01***75 | Screw | 42 |
| 01***08 | Nut,R.H. Thread | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 42 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Rocker Arm(#75758-)
| 01***75 | Screw | 40 |
| 01***08 | Nut,R.H. Thread | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 40 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Safety Guard (For Fuel Injection Pump Drive)(#61589-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 61***50 | Cover, Safety | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Starting Motor (11kw) (Inner Parts)(#61589-86022)
| 60***10 | Starting Motor Ass'Y,(11kw) | 1 |
| SD***X0 | Bearing,Ball | 1 |
| SD***X0 | Brush Holder Ass'Y | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Starting Motor (11kw) (Inner Parts)(#86023-)
| 60***11 | Starting Motor Ass'Y,(11kw) | 1 |
| KD***40 | Spring,Spring | 4 |
| KD***57 | Bearing, Ball, Front | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Starting Motor (7.5kw) (Inner Parts)(#61589-)
| 60***11 | Starting Motor Ass'Y,(7.5kw) | 1 |
| KD***60 | Shift Lever Assembly | 1 |
| KD***40 | Spring,Spring | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Starting Motor Mounting (11kw)(#61589-86022)
| 01***40 | Bolt (Kit) | 3 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Starting Motor Mounting (11kw)(#86023-)
| 01***40 | Bolt (Kit) | 3 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***16 | Washer,Radio Controlled Slag Handling | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Starting Motor Mounting (7.5kw)(#61589-)
| 01***40 | Bolt (Kit) | 3 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Tachometer Drive(#75758-)
| 61***31 | Gear,(With Air Compressor Type) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Thermostat Housing(#61589-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***65 | Screw | 4 |
| 02***04 | Plug,(For Shipping) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Turbocharger Oil Piping(#61589-71747)
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Turbocharger Oil Piping(#71748-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Water Drain Valve(#61589-)
| 07***75 | Hose | 1 |
| 08***14 | Band,(For Additional Fuel Strainer) | 1 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Water Pump Gasket Kit(#61589-)
| 02***37 | O-Ring,(For Pc750?1800) (A5010) | 1 |
| 07***15 | O-Ring,Scavenge Pump | 1 |
| 61***90 | Gasket (K2?K6) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Water Pump(#61589-71645)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Water Pump(#71646-75151)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Water Pump(#75152-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Water Separator And Piping(#80412-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***55 | Bolt,(With Corrosion Resistor) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Water Separator(#80412-)
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
| 60***90 | O-Ring | 1 |
| 60***90 | Plug,Drain | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Sa6d125e-2c-S Engine S/N 60721-Up : Water Temperature Sensor(#61589-)
| 07***12 | Washer, Gasket,(Without Thermo Sensor) (K1) | 1 |
| 07***15 | Plug,(Used When Without Heater) | 1 |
| 60***61 | Sensor,Water Temperature | 1 |
Service Kit And Component Parts
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Brake Control (Accumulator) (Inner Parts)(#54001-54099)
| 07***00 | O-Ring,(F4350-65a1 -5 ) | 1 |
| 07***90 | O-Ring,Grease Pump Strap | 1 |
| 07***90 | Ring,Back-Up (Kit) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Brake Control (Accumulator) (Inner Parts)(#54101-)
| 07***00 | O-Ring,(Y1620-11a0a-11) | 2 |
| 07***90 | O-Ring,Grease Pump Strap | 2 |
| 70***20 | Ring,Back-Up (Kit) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Check Valve
| 07***35 | O-Ring, At Lower Oil Cooler Inlet Port | 1 |
| 70***11 | Body | 1 |
| 70***21 | Poppet | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Control Valve (2-Spool) (1/3)
| 01***25 | Bolt,(For Shipping) | 2 |
| 01***60 | Capscrew | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Control Valve (2-Spool) (2/3)
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 3 |
| 07***34 | O-Ring,(For Without Brake Assistor) | 2 |
| 07***08 | Plug,See Fig. K4010-63a0 | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Control Valve (2-Spool) (3/3)
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
| 07***32 | Ring, Back-Up | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Cut-Off Valve
| 01***16 | Screw | 4 |
| 01***25 | Screw | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Dump Cylinder(#54001-54099)
| 01***45 | Capscrew | 6 |
| 01***75 | Capscrew | 12 |
| 01***60 | Flat Washer - M20 (Hardened) | 12 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Dump Cylinder(#54101-)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***75 | Capscrew | 12 |
| 01***60 | Flat Washer - M20 (Hardened) | 12 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Hydraulic Pump (Steering And Switch) (1/2)
| 04***20 | Ring, Retaining | 1 |
| 70***40 | Pump Ass'Y,(Sar71) | 1 |
| 70***11 | Seal, Oil | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Hydraulic Pump (Steering And Switch) (2/2)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 07***55 | O-Ring,Front Yoke | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Hydraulic Pump (Transmission)
| 04***20 | Ring, Retaining | 1 |
| 70***10 | Shaft Seal | 1 |
| 70***70 | Plate | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Hydraulic Pump (Work Equipment And P.P.C.) (1/2)
| 04***20 | Ring, Snap | 1 |
| 70***11 | Seal,Seal | 1 |
| 70***70 | Spacer, Oil Seal | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Hydraulic Pump (Work Equipment And P.P.C.) (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 07***32 | O-Ring (Kit) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Kit (Transmission)
| 07***10 | O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010 | 1 |
| 07***12 | O-Ring, Between Valve And Pump | 3 |
| 07***14 | O-Ring,(F4350-63a1a-2 ) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Lift Cylinder(#54001-54099)
| 01***45 | Capscrew | 6 |
| 01***65 | Bolt,(For Shipping) | 12 |
| 01***45 | Washer,(Without R.O.P.S.) | 12 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Lift Cylinder(#54101-)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***65 | Bolt,(For Shipping) | 12 |
| 01***45 | Washer,(Without R.O.P.S.) | 12 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Ppc Valve
| 07***20 | O-Ring,Relief Valve | 4 |
| 70***05 | Valve Assembly, P.P.C. - Two-Spool | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Steering Cylinder(#54001-54099)
| 07***00 | O-Ring,(F4350-65a1 -5 ) | 1 |
| 07***95 | O-Ring,(Y1620-11a0a-12) | 1 |
| 07***08 | Plug,(For W/O. Corrosion Resistor) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Service Kit And Component Parts : Steering Cylinder(#54101-)
| 07***95 | O-Ring,(Y1620-11a0a-12) | 1 |
| 07***00 | O-Ring,(Y1620-11a0a-11) | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Suspension And Wheel Related Parts
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Suspension And Wheel Related Parts : Front Steel Wheel(#54101-)
| 41***00 | Pin,Roll | 80 |
| 41***30 | Wheel Ass'Y,Steel | 2 |
| 41***60 | Cap,Front | 80 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Suspension And Wheel Related Parts : Rear Steel Wheel(#54101-)
| 41***10 | Pin,Roll | 80 |
| 41***10 | Wheel Ass'Y,Steel | 2 |
| 41***70 | Cap,Rear | 80 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Suspension And Wheel Related Parts : Steel Wheel (Chopper Foot)
| 07***34 | O-Ring,Transmission And Steering Case | 4 |
| 07***20 | Plug, Drain And Fill | 4 |
| 42***10 | Plate (Welded) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Suspension And Wheel Related Parts : Steel Wheel (Triangle Foot)
| 07***34 | O-Ring,Transmission And Steering Case | 4 |
| 07***20 | Plug, Drain And Fill | 4 |
| 41***10 | Plate (Welded) | 8 |
Transmission
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Drive Shaft (Center)
| 01***60 | Bolt, Upper Shaft Mounting | 8 |
| 41***30 | Lubrication Nipple | 3 |
| 42***20 | Spider Assembly | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Drive Shaft (Front)
| 01***75 | Capscrew (4) (Qty.3 (5)) | 4 |
| 01***05 | Bolt, Yoke Mounting | 1 |
| 01***60 | Bolt, Upper Shaft Mounting | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Drive Shaft (Rear)
| 01***60 | Bolt, Upper Shaft Mounting | 8 |
| 42***90 | Screw | 8 |
| 42***20 | Spider Ass'Y | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Front Axle (Front Axle Housing) (Limited Slip Diff.) (Kohag)(#54101-)
| 01***50 | Screw | 17 |
| 01***55 | Screw | 3 |
| 01***45 | Bolt, Mount Retainer | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Front Axle (Front Differential) (Limited Slip Diff.) (Kohag)(#54101-)
| 01***40 | Bolt,(Dust And Dirt Protection) | 18 |
| 01***30 | Bolt,(For Center Guard) | 2 |
| 01***55 | Screw | 7 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Front Axle (Front Final Drive)
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 12 |
| 01***50 | Screw | 16 |
| 01***20 | Screw | 24 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Front Axle (Front Wheel Brake)
| 01***40 | Bolt,(Not Used With Cab) | 12 |
| 01***65 | Hexagon Bolt | 16 |
| 01***80 | Bolt,(B) | 32 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Front Axle And Axle Mounting Parts
| 01***24 | Nut,Bearing | 8 |
| 01***80 | Washer,(For Shipping) | 16 |
| 42***40 | Screw | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Front Axle Wheel Mounting Parts
| 01***60 | Flat Washer - M20 (Hardened) | 50 |
| 42***90 | Nut, Lug - Wheel Mounting | 50 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Rear Axle (Rear Axle Housing)
| 01***45 | Bolt, Mount Center Hinge Retainer (Lower) | 12 |
| 01***50 | Screw | 22 |
| 01***40 | Screw | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Rear Axle (Rear Differential) (Limited Slip Diff.) (Kohag)
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Rear Axle (Rear Final Drive)
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 12 |
| 01***50 | Screw | 16 |
| 01***20 | Screw | 24 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Rear Axle (Rear Wheel Brake)
| 01***40 | Bolt,(Not Used With Cab) | 12 |
| 01***65 | Hexagon Bolt | 16 |
| 01***80 | Bolt,(B) | 32 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Rear Axle And Wheel Mounting Parts
| 01***60 | Flat Washer - M20 (Hardened) | 50 |
| 42***90 | Nut, Lug - Wheel Mounting | 50 |
| (4***0) | Axle Ass'Y,Rear | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Torque Converter
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 18 |
| 01***30 | Bolt,(With Body Positioner) | 32 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 12 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Torque Converter And Transmission (Mounting Bracket)
| 01***50 | Bolt,(For D60pl) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| 07***04 | Hose,(Without Add. Filter) | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Torque Converter And Transmission (Mounting Parts? Transmission)
| 01***40 | Bolt, Mount Retainer | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
| 07***12 | O-Ring, Divider Valve Mounting | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Torque Converter And Transmission (Oil Cooler Hose Piping)
| 07***34 | O-Ring,(For Front Attachment) | 1 |
| 07***17 | Hose Assembly | 1 |
| 07***21 | Hose, To Torque Converter | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Torque Converter And Transmission (Oil Filler Tube Cap) (Kohag)(#54101-)
| 41***10 | Cap,Lock Type | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Torque Converter And Transmission (Parking Brake Piping)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 04***10 | Clamp | 2 |
| 07***13 | Hose,Blue-Red | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Torque Converter And Transmission (Wiring Harness? Transmission)
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 04***10 | Clip,(With Accumulator) | 2 |
| 08***00 | Diode,(With Air Conditioner) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Torque Converter And Transmission Mounting
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (3rd And 4th Clutch)
| 06***15 | Bearing,Ball | 1 |
| 71***10 | Washer, Thrust | 2 |
| 71***20 | Washer, Thrust | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (Accessory)
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (Control Valve Mounting)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 6 |
| 01***85 | Bolt, Divider Valve Mounting | 5 |
| 01***15 | Bolt, Fan Mounting | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (Forward And 1st Clutch)
| 06***15 | Bearing | 1 |
| 06***15 | Bearing,Roller | 1 |
| 71***20 | Washer, Thrust | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (Input? 4th And Output Shaft)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***30 | Capscrew | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (P.T.O.)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***14 | Nut,Ring | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (Parking Brake)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 12 |
| 01***10 | Bolt,For Weight Adjusting Bolt | 9 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (Reverse And 2nd Clutch)
| 06***15 | Bearing | 1 |
| 71***20 | Washer, Thrust | 4 |
| 71***50 | Spacer | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (Transmission Case)
| 01***40 | Bolt,For Weight Adjusting Bolt | 26 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (Transmission Piping) (1/2)
| 01***45 | Capscrew - M16 | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission (Transmission Piping) (2/2)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission Accumulator Valve
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 07***35 | O-Ring,(F4350-61a0 -32 ) | 6 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission Attachment
| 01***50 | Capscrew | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| 42***20 | Bracket, Front Trasmission | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission Control Valve (Lower Valve)
| 01***35 | Bolt,(For Fix Position) | 7 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 16 |
| 01***16 | Screw,(Sandy And Dusty Terrain S.) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission Control Valve (Pilot Filter)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 1 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission Control Valve (Upper Valve)
| 01***25 | Bolt,(Without Auto Priming System) | 16 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission Flow Control Valve
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 07***30 | Ring, Seal - Between Sections | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Transmission : Transmission Modulation Valve
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***35 | Bolt,(For Fix Position) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Work Equipment
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Bucket 3.9m3(#54101-)
| 41***50 | Holder,Tooth (Welded) | 9 |
| 41***60 | Tooth | 9 |
| 41***70 | Safety Catch | 9 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Dump Cylinder (Piping And Mounting)(#54001-54099)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***30 | Bolt - Pin Mounting | 2 |
| 01***45 | Bolt,(Noise Abatement Part) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Lift Arm And Bellcrank (Boom Kick Out)(#54101-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Lift Arm And Bellcrank (Bucket Positioner)(#54101-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 2 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Lift Arm And Bellcrank (Dump Cylinder Piping And Mounting Parts)(#54101-)
| 01***30 | Bolt - Pin Mounting | 2 |
| 01***30 | Screw | 16 |
| 01***65 | Screw | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Lift Arm And Bellcrank (Lift Cylinder Mounting Parts)(#54101-)
| 01***30 | Bolt - Pin Mounting | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
| 42***20 | Seal,Dust (Kit) | 4 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Lift Arm And Bellcrank (Lift Cylinder Piping)(#54101-)
| 01***30 | Screw | 16 |
| 01***30 | Screw | 16 |
| 01***65 | Screw | 16 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Lift Arm And Bellcrank (Mounting Parts)
| 01***30 | Bolt - Pin Mounting | 7 |
| 01***06 | Nut, (Service Parts) | 8 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 16 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Lift Arm And Bellcrank(#54101-)
| 42***70 | Nut | 2 |
| 42***10 | Seal,Dust (Kit) | 8 |
| 42***20 | Seal,Dust (Kit) | 8 |
Komatsu : Wf450-3-D(S/N 54001-Up (For Komatsu Hanomag)) : Work Equipment : Lift Cylinder (Hydraulic Piping)(#54001-54099)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 16 |
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) serial number reference
On this Hanomag-built compactor the product identification (PIN) plate is riveted to the front chassis frame on the right-hand side, as seen facing the direction of travel, with the number also stamped into the frame steel itself. The serial reads as a straight number rather than a modern multi-letter worldwide PIN: the leading digits (540xx) identify the Hanomag-Germany WF450-3-D production block, and the trailing digits are the sequential unit count within that block.
| Prefix | Identifies | Notes |
|---|---|---|
| 540 | WF450-3-D, Komatsu Hanomag (Germany) build, S/N 54001-UP | Waste/landfill compactor, roughly 26 t class, built at the Komatsu Hanomag plant in Hannover, Germany. Serial block starts at 54001 and runs upward for this Hanomag-market parts book. Fitted with the Komatsu SA6D125E-2 family diesel, rated about 194 kW (263 PS), driving a full powershift transmission with 4 forward/4 reverse speeds. Documented production centers on the early 2000s; confirm exact build year and any mid-run running changes with your dealer using the full PIN. |
Frequently asked questions
What engine powers the Komatsu WF450-3-D(S/N 54001-UP, for Komatsu Hanomag)?
A Komatsu SA6D125E-2 6-cylinder diesel rated about 194 kW (260 hp) gross at 2,200 rpm, 11.04 L displacement, and roughly 1,050 Nm peak torque, the same engine family fitted to the contemporary WA450-3/WA470-3 wheel loaders.
What is the operating weight of the WF450-3-D(S/N 54001-UP, for Komatsu Hanomag)?
About 26,000 kg (57,320 lb) as equipped with front and rear sheepfoot-type compaction drums in place of tires.
What replaced the Komatsu WF450-3-D(S/N 54001-UP, for Komatsu Hanomag)?
Komatsu did not carry a WF-series landfill compactor forward into its current lineup; today's waste-industry offering is built around standard wheel loaders, dozers, and excavators rather than a dedicated purpose-built compactor, so there is no direct factory successor model.
What WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) owners discuss
How does the WF450-3-D driveline behave in everyday landfill work?
This machine rides on the same chassis, torque-converter powershift transmission, and axle sets as the Komatsu WA450-3/WA470-3 wheel loader line. Factory parts records list the loader's transmission assembly and hydraulic pumps as shared with the WF450-3/WF450T-3 compactor family. Expect the same shift feel as the loader: smooth powershift engagement under load, with the torque converter absorbing shock when the compaction wheels bite into loose refuse. On the loader platform, owners consistently trace sluggish or delayed shifts back to low or contaminated transmission oil rather than a transmission fault, so check fluid condition first before assuming a hard failure.
What hydraulic behavior should I expect, and what tends to wear first?
The main hydraulic gear pump and steering/implement circuits are the same units used on the WA450-3/WA470-3 loader. Wear follows the same pattern reported on that platform: pump output drops off gradually as internal wear increases, showing up first as slower blade or lift response rather than a sudden failure. Landfill duty runs the engine at sustained load with hydraulics cycling constantly (blade, articulation, steering), so pump and hose service life tends to run shorter here than on a loader doing general yard work. Budget for more frequent hydraulic fluid and filter service than the loader's own interval would suggest.
What wear pattern is typical for the compaction wheels and axles on this type of machine?
The steel wheel tips wear down and lose their kneading/crushing profile over time. Worn tips reduce compaction density even when the rest of the machine runs fine, so tip height and shape need routine inspection. The bigger recurring issue on wheel-type landfill compactors is wire, cable, and stringy refuse wrapping tightly around the axle near the wheel hub. Left alone, this cuts into axle and final-drive seals and leads to seal failure and oil loss. On a working unit this usually means pulling the wheel to clear the wrap. Check that scraper bars and any wire-guard hardware around the wheels are present and intact, since these are what keep debris from packing in during normal operation.
Are there known engine quirks tied to the SA6D125E-2 in this application?
This compactor uses the same turbocharged, aftercooled diesel rated around 194 kW (260 hp) that powers the WA450-3/WA470-3 loader. On that shared engine platform, owners have reported diesel fuel getting into the crankcase oil, showing up as hard starting, white smoke on a cold start, and a drop in fuel rail pressure, sometimes traced to a leaking injector allowing fuel past its seal into the return or oil circuit. This is not a universal complaint but shows up often enough to be worth checking. Given the sustained high-load duty cycle in refuse work compared to general loader duty, the engine and turbo run harder on average, so have your dealer verify injector condition and oil dilution on any unit with unexplained hard starting or a fuel smell in the oil.
What electrical or sensor problems come up on machines from this era?
Machines of this generation are known more for gauge cluster and sender issues than deep wiring faults. A water-temperature or transmission-pressure gauge that reads erratically or stops working is usually a corroded sender or a bad connection at the sender, not a bad gauge. If every gauge and warning light drops out at once, check the main instrument fuse and main power relay before assuming the cluster itself has failed. Landfill duty adds extra corrosion exposure to connectors and grounds from ash, leachate, and general debris, so harness condition near the cab floor and rear frame is worth a closer look than on a machine that never left a yard.
Does landfill duty create extra risks specific to this machine beyond normal wear?
Yes. Heat off the turbo, a full fuel tank, and pressurized hydraulic lines working alongside combustible refuse (paper, plastic, occasional batteries) make fire a real and recognized risk on wheel-type landfill compactors generally, this one included. Clearing debris off the engine bay and exhaust area, and keeping wheels and axles free of wrapped wire and stringy waste, is treated as routine daily maintenance rather than an occasional job on machines in this duty cycle. Have your dealer verify the condition of exhaust/turbo shielding and any fire-suppression provisions before putting a used unit into daily refuse work.
What should I check when buying a used WF450-3-D landfill compactor?
Inspect the compaction wheel tips for wear and confirm they still hold a usable crushing profile; flattened or rounded tips mean reduced compaction performance even if the rest of the machine looks sound. Check around each axle and wheel hub for packed or wrapped debris, and ask whether wheels have ever been pulled to clear wrapped wire, since unresolved wrapping is a common cause of axle seal failure on this type of machine. Run the engine and check for a diesel smell in the crankcase oil, white smoke on cold start, or slow cranking, given the fuel-into-oil quirk reported on this engine platform. Cycle the transmission through all gears and directions under light load to confirm smooth, non-delayed shifts, and run the blade and hydraulics through full travel to check for slow or spongy response. Since this serial range is the Hanomag/German-market build, confirm the unit's actual configuration and service history against dealer records rather than assuming it matches a generic listing for the model. Have your dealer verify axle seal and final-drive condition before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific WF450-3-D(S/N 54001-UP (FOR KOMATSU HANOMAG)) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.