Komatsuhydraulic excavatorsmall ( - pc90)
Komatsu PW95-1(S/N 0005747-Up)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu PW95-1 is a wheeled midi excavator with a full 360-degree slewing upper structure mounted on a rigid four-wheel undercarriage. It is powered by a Perkins 1004-4 four-cylinder diesel rated 56 kW (75.1 hp) gross at 2000 rpm and displacing 3.99 liters, driving through a torque-converter/powershuttle transmission to front and rear axles. Operating weight runs roughly 9.5 to 9.8 tonnes (21,000-21,600 lb), varying with blade, outrigger, and counterweight configuration. Komatsu built the PW95-1 from 1994 to 1999 as the launch model of its PW95 wheeled-excavator line, offered with a front dozer/leveling blade, rear stabilizer outriggers, and a choice of boom and arm combinations for reach and offset digging.
In 2000 Komatsu replaced the PW95-1 with the PW95R-2, a revised-chassis wheeled excavator built for the following generation of the European utility and municipal market, with its own engine and hydraulic package; the two generations do not share powertrain parts despite the common model number. Because the PW95-1 used a widely serviced Perkins engine and Komatsu hydraulic and swing components also found on its PC95-1 crawler sibling, parts and service knowledge for it remain accessible even though the machine is now three decades old. Surviving units are mostly found in the used-equipment and parts market, where buyers value the simple mechanical fuel system, a rebuildable axle and swing drivetrain, and a pre-emissions-era engine with no aftertreatment to maintain.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu PW95-1(S/N 0005747-Up) specifications
Engine
| Engine model | Perkins 1004-4, 4-cylinder inline diesel |
| Gross power | 56 kW (75.1 hp) @ 2000 rpm |
| Net power | Not separately published for this serial range — gross rating only documented |
| Displacement | 3.99 L (3,990 cc / 243.5 cu in) |
| Cylinders | 4 |
| Emissions tier | Not documented — machine predates formal EPA/EU emissions-tier regulation for this equipment class |
Weights
| Operating weight (standard config) | 9,150 kg (20,172 lb) |
| Long-undercarriage/variant configs | No alternate weight configuration documented for this wheel excavator |
| Ground pressure | Not applicable — wheeled (rubber-tire) undercarriage, no track ground-pressure spec published |
| Transport weight | Not separately documented — treat as equal to operating weight absent other data |
Dimensions
| Transport length | approx. 5.9-6.1 m (19.4-20.0 ft) — figure varies by configuration/series |
| Transport width | approx. 3.0 m (9.8 ft) — figure varies by configuration/series; verify with your dealer |
| Transport/shipping height | 3.96 m (13.0 ft) with boom raised for transport; height to top of cab 2.98 m (9.78 ft) |
| Tail swing radius | 1.50 m (4.93 ft) |
| Track shoe width | Not applicable — wheel-mounted undercarriage, no track shoes |
| Ground clearance | 0.33 m (1.09 ft) |
| Undercarriage length / wheelbase | 2.20 m (7.22 ft) wheelbase (wheeled machine, no track undercarriage length) |
Performance
| Max dig depth | 3.41 m (11.19 ft) |
| Max reach at ground level | 6.33 m (20.76 ft) |
| Max dump height | 4.44 m (14.57 ft) |
| Max cutting height | 6.41 m (21.04 ft) |
| Swing speed | 9 rpm |
| Max travel speed | 32.0 km/h (19.9 mph) |
| Gradeability | Not documented for this serial range — verify with dealer or factory literature |
| Drawbar pull | Not documented for this serial range — verify with dealer or factory literature |
Forces
| Bucket digging force | Not documented in available spec sources for this serial range |
| Stick/arm digging force | Not documented in available spec sources for this serial range; no std-vs-long-stick distinction found |
Service capacities (summary)
| Fuel tank | 140 L (37.0 gal) |
| Hydraulic system (tank/reservoir) | Hydraulic pump flow approx. 238 L/min (62.9 gpm) at relief pressure approx. 34.3 MPa (4,980 psi); tank capacity is covered in the fluids and lubricants section. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PW95-1(S/N 0005747-Up) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 11.5 L (3.0 US gal) | SAE 10W, 20W-20, SAE 30, or SAE 40 diesel engine oil (API CD/CE), graded by ambient temperature per the OMM chart. Engine on this early PW95-1 range is the Perkins 1004.4 four-cylinder turbo diesel, not a Komatsu-branded block, so verify oil spec against the Perkins section of the manual before assuming a Komatsu-engine oil callout. |
| Cooling system (radiator + engine block) | 41 L (10.8 US gal) — figure runs high for this engine class; confirm with a dealer before a full system refill. | Ethylene-glycol antifreeze/coolant, corrosion-inhibited, pre-charged type; mix ratio set per climate per the OMM chart. This figure comes from a single factory table read and runs high for this engine class — confirm with a dealer before a full system refill. |
| Fuel tank | 140 L (37.0 US gal) | No. 2-D diesel fuel (ASTM D975); switch to No. 1-D or a winter blend in cold ambient conditions. |
| Hydraulic tank (refill) | 76 L (20.1 US gal) | Genuine anti-wear hydraulic oil, ISO VG grade selected by ambient temperature per the OMM chart. |
| Hydraulic system total (tank + lines + cylinders) | Not itemized separately from the tank refill figure above in available sources — confirm total-system fill with a dealer before a full circuit flush. | Same hydraulic oil as the tank above. |
| Axle differential and planetary hub reduction (each, front and rear) | 0.9 L (0.24 US gal) per unit | API GL-5 gear oil, SAE 80W-90. |
| Transmission and axle shared reservoir | 7.8 L (2.06 US gal) combined | UTTO (Universal Tractor Transmission Oil), API GL-4 performance level. |
| Swing drive (upper structure slew reduction case) | 4 L (1.06 US gal) | API GL-5 gear oil, SAE 80W-90 (MIL-L-2105D equivalent). |
| Grease (chassis pins, bushings, slew ring) | N/A — spec only, applied per grease point on the lubrication schedule | NLGI 2 multipurpose lithium EP grease, molybdenum-disulfide fortified for pin and bushing points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu PW95-1(S/N 0005747-Up) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the PW95-1(S/N 0005747-Up) beyond the schedule
Predictive Maintenance & Fluid Analysis
On a Perkins 1004-4-powered PW95-1, trend engine oil analysis every 250 hours to catch injection-pump or ring wear before compression drops. Sample hydraulic oil at each 500-hour interval; these machines run one hydraulic pump feeding boom, arm, blade, and outrigger circuits, so contamination shows up fast as sluggish or drifting cylinders. Check swing gear oil and axle differential/hub oil condition at scheduled changes, and log coolant corrosion-inhibitor levels, since many surviving units are now well past 10,000 hours and rely on trend data more than fixed calendar service.
Corrective & Common Repairs
Typical PW95-1 complaints center on hydraulic cylinder rod seal leaks at the boom, arm, and blade cylinders, and swing bearing backlash that shows up as play or knocking at the turntable. Axle hub reduction seals weep gear oil with age, and the Perkins fuel system is sensitive to stored diesel; injector and lift-pump faults after long idle periods are common. Steering linkage and kingpin wear on the rigid wheeled undercarriage also shows up as wander at speed and should be checked with the machine on stands.
Overhaul & Rebuild Points
Major rebuild points on this machine are the main hydraulic pump and control valve, the swing motor with its epicyclic reduction gear, and the front/rear axle differentials and planetary hub drives, all of which see heavy duty cycles on a wheeled undercarriage doing repetitive digging and travel. Engine overhauls on the Perkins 1004-4 typically address the cylinder head, injectors, and bearings once compression or oil consumption drops. Boom, arm, and bucket pins and bushings wear steadily and are routinely replaced as a set during any structural rebuild.
Seasonal & Environment Servicing
Before winter, switch the Perkins 1004-4 to a cold-weather engine oil viscosity and confirm coolant freeze protection and glow-plug/cold-start aid function, since these small diesels can be hard starting below freezing. Check hydraulic oil viscosity grade for cold climates so the boom and blade respond normally at startup. In hot or dusty conditions, clean the radiator and oil cooler fins and service the air cleaner element more frequently. Wet or coastal sites call for extra attention to outrigger and blade cylinder rod protection and axle seal condition to limit corrosion.
PW95-1(S/N 0005747-Up) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 6810-71-6160 | Pre-Fuel Filter | Fuel system service | Check fitment → |
| 6810-51-5130 | Oil Filter | Lubrication service | Check fitment → |
| 21D-60-11170 | Oil Filter, Assembly | Lubrication service | Check fitment → |
| 21D-04-11270 | Filter | Scheduled service item | Check fitment → |
| 21D-04-11380 | Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PW95-1(S/N 0005747-Up) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine oil pressure warning lamp (red, oil-can symbol) | Engine lubrication pressure has dropped below the safe minimum | Low oil level, clogged oil filter, worn oil pump, or worn bearings | Stop the engine immediately, check oil level and filter condition, do not restart until the cause is corrected |
| Coolant temperature warning lamp / red zone on temperature gauge | Engine coolant has exceeded normal operating temperature | Low coolant level, blocked radiator core, failed thermostat, or loose/broken fan belt | Idle the engine, let it cool, then check coolant level, radiator fins, and belt tension before resuming work |
| Battery charge (alternator) warning lamp | Charging circuit is not supplying current to the battery | Loose or broken alternator belt, failed alternator, or a wiring/connector fault | Check belt tension and wiring connections, then have the charging system tested |
| Air cleaner restriction indicator | Intake air filter element is clogged, restricting airflow to the engine | Dust and debris buildup in the paper element or pre-cleaner | Service or replace the air filter element per the maintenance interval |
| Hydraulic oil temperature gauge in red zone / high-temp warning | Hydraulic fluid has exceeded safe operating temperature | Low hydraulic fluid level, clogged oil cooler, or internal pump/relief-valve wear generating excess heat | Idle the machine to allow cooling, check fluid level and cooler fins, and inspect for internal leakage if overheating repeats |
| Fuel level low warning lamp | Fuel tank level has dropped to reserve | Running low on diesel, or a faulty fuel-gauge sender | Refuel; if the lamp stays lit with a full tank, check the sender unit and wiring |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PW95-1(S/N 0005747-Up) attachments & work tools
Buckets
This machine falls in the roughly 9.5-9.8 t class wheel excavator, and reference bucket capacity runs about 0.3 m3 (0.4 yd3), with a general-purpose/heavy-duty range of about 0.15-0.4 m3 (0.2-0.5 yd3) depending on soil vs. rock duty. General-duty buckets in this capacity band typically run 600-900 mm (24-36 in) wide, with rock buckets sized toward the narrower end for higher breakout force. Buckets in this class are normally pin-on from the factory; a retrofit hydraulic coupler is common in the aftermarket.
Hydraulic hammers
For a carrier in the 9.5-10 t operating-weight class, the matching breaker falls in the light/mid-duty class, roughly 700-1,100 kg (1,500-2,400 lb) service weight, following the common rule of pairing a breaker at about 10% of carrier operating weight. Exact model fitment varies by breaker brand and by the auxiliary circuit fitted to this specific serial range - confirm flow and pressure with your dealer before ordering.
Quick couplers
Machines in this 7-10 t wheel-excavator class commonly use pin-on attachment mounting from the factory, with both manual (pin-grabber/wedge) and hydraulic quick couplers offered as retrofit options in the aftermarket. Coupler pin diameter for this weight class typically runs 45-55 mm depending on the coupler brand and bucket pin bosses fitted - verify actual pin diameter against the machine's arm and bucket before ordering a coupler.
Thumbs/grapples
Hydraulic thumbs (main-pin or progressive-linkage style) sized for excavators from roughly 9 t and up bolt or pin to the stick/bucket linkage of this class of machine for handling pipe, brush, and debris. Hydraulic grapples in the same size class are used for demolition, land-clearing, and scrap/debris handling; both require a dedicated auxiliary hydraulic line to actuate the jaw or thumb cylinder.
Rippers
A single-shank ripper tooth sized for the 6-9.9 t excavator class is the practical match for this machine, mounted pin-on in place of the bucket (or via quick coupler where fitted). It is used to loosen hard-packed soil, frost, or thin asphalt ahead of digging rather than for heavy rock ripping, which needs a larger class of carrier.
Hydraulic-kit notes
This is a 1990s-era wheel excavator without a factory high-flow circuit; breaker and other single-function work tools need a dedicated one-way auxiliary (breaker) hydraulic circuit at standard system pressure rather than a two-way high-flow circuit. Whether this specific serial range carries a factory-fitted auxiliary breaker line is not confirmed - check the machine's own hydraulic schematic or ask your dealer before fitting a hammer or other powered attachment.
All PW95-1(S/N 0005747-Up) assemblies by section
Every catalogued assembly group for the Komatsu PW95-1(S/N 0005747-Up). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Control System And Revolving Frame
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Blade Control Lever
| 01***20 | Bolt,(Without Maintenance Monitor) | 2 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***06 | Nut,L.H. Thread (For Russian) | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Fuel Control Lever
| 01***40 | Bolt | 2 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 1 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Hydraulic Piping (2nd Boom Ppc Valve Line)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 21***60 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Hydraulic Piping (Arm And Swing Valve Line) (1/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***16 | Bolt,(Without Cab) | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Hydraulic Piping (Arm And Swing Valve Line) (2/3)
| 21***60 | Union | 4 |
| 21***00 | Elbow | 2 |
| 21***10 | Union | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Hydraulic Piping (Arm And Swing Valve Line) (3/3)
| 01***45 | Bolt | 1 |
| 01***23 | Washer,(With Auto Emergency Steering) | 1 |
| 21***80 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Hydraulic Piping (Boom And Bucket Valve Line) (1/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***16 | Bolt,(Without Cab) | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Hydraulic Piping (Boom And Bucket Valve Line) (2/2)
| 21***60 | Union | 5 |
| 21***00 | Elbow | 3 |
| 21***10 | Union | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Hydraulic Piping (Boom Swing Ppc Line)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 6 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Hydraulic Piping (Outrigger Or Blade Valve Line)
| 21***60 | Union | 2 |
| 21***80 | Union | 4 |
| 21***00 | Elbow | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Hydraulic Piping (Travel Ppc Valve Line)
| 01***25 | Bolt, Seal Cover Mounting | 3 |
| 21***80 | Union | 3 |
| 21***00 | Elbow | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Revolving Frame
| 01***80 | Bolt | 4 |
| 21***10 | Washer | 4 |
| 21***10 | Revolving Frame | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Servocontrol System Starting Lever
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 21***30 | Switch | 1 |
| 21***20 | Nut | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Control System And Revolving Frame : Steering Wheel And Column
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***16 | Bolt,(Without Cab) | 3 |
Cylinder Head
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Alternator
| 68***01 | Alternator | 1 |
| 68***40 | Regulator | 1 |
| 68***50 | Rectifier | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Alternator And Generator
| 68***30 | Bolt | 3 |
| 68***70 | Screw | 2 |
| 68***80 | Bolt | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Crankshaft - Pistons And Connecting Rods
| 68***10 | Kit, Bearing | 1 |
| 68***20 | Kit, Bearing (--0.25 mm) | 0 |
| 68***30 | Kit, Bearing (--0.50 mm) | 0 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Cylinder Block
| 68***00 | Kit, Cylinder Block | 1 |
| 68***20 | Plug | 1 |
| 68***30 | Washer | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Cylinder Head
| 21***02 | Aspirated Engine | 1 |
| 68***00 | Kit, Cylinder Head | 1 |
| 68***10 | Plug | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Cylinder Head Cover - Lubricating Oil Filter And Breather
| 68***12 | Cylinder Head Cover | 1 |
| 68***61 | Gasket | 1 |
| 68***70 | Nut | 3 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Fan Drive
| 68***01 | Support | 1 |
| 68***21 | Pulley, Fan | 1 |
| 68***31 | Belt, Fan | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Flywheel Housing - Flywheel And Starter Ring
| 68***80 | Plug | 1 |
| 68***10 | Housing, Flywheel | 1 |
| 68***20 | Plate | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Fuel Filter
| 68***80 | Screw | 2 |
| 68***30 | Sleeve | 1 |
| 68***40 | Nut | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Fuel Injection Equipment
| 68***00 | Valve Assembly | 4 |
| 68***10 | Holder | 1 |
| 68***20 | Nozzle | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Fuel Pump
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Induction And Exhaust Manifolds
| 68***12 | Manifold, Intake | 1 |
| 68***20 | Gasket | 1 |
| 68***30 | Gasket | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Injector
| 68***00 | Valve Assembly | 4 |
| 68***10 | Holder | 1 |
| 68***20 | Nozzle | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Joints And Gaskets - Bottom Service Kit
| 68***10 | Kit, Gasket | 1 |
| 68***60 | Gasket | 1 |
| 68***70 | Gasket | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Joints And Gaskets - Top Service Kit
| 68***20 | Kit, Gasket | 1 |
| 68***90 | Gasket | 1 |
| 68***40 | Seal, Oil | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Low Pressure Fuel System
| 68***30 | Bolt | 1 |
| 68***40 | Nut | 1 |
| 68***70 | Sleeve | 6 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Lubricating Oil Filter And Integral Oil Cooler
| 68***50 | Plug | 1 |
| 68***40 | Seal, Oil | 1 |
| 68***40 | Clamp | 6 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Lubricating Oil Pump And Delivery Housing
| 68***80 | Bolt | 2 |
| 68***10 | Oil Pump | 1 |
| 68***20 | Shaft | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Lubricating Oil Sump
| 21***60 | Valve (Only For Tbg) | 1 |
| 21***70 | Union (Only For Tbg) | 1 |
| 21***40 | Gasket (Only For Tbg) | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Pre-Fuel Filter
| 68***60 | Pre-Fuel Filter | 1 |
| 68***70 | Nut | 2 |
| 68***80 | Sleeve | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Pulley, Crank
| 68***30 | Pulley, Crank Shaft | 1 |
| 68***40 | Flange | 1 |
| 68***50 | Screw | 3 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Rocker Shaft
| 68***10 | Push-Rod | 8 |
| 68***20 | Tappet | 8 |
| 68***00 | Rocker Shaft Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Starter Motor And Mounting
| 68***01 | Starter Motor, Assembly | 1 |
| 68***10 | Stud | 3 |
| 68***20 | Nut | 3 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Throttle And Stop Controls
| 68***10 | Support | 1 |
| 68***20 | Pin | 1 |
| 68***30 | Spring Washer | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Timing Gear And Camshaft
| 68***30 | Bolt | 8 |
| 68***11 | Timing Gear Case | 1 |
| 68***30 | Screw | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Cylinder Head : Water Pump - Thermostat And Heat Exchanger
| 68***40 | Plug | 3 |
| 68***10 | Thermostat Housing | 1 |
| 68***20 | Gasket | 1 |
Engine Related Parts And Electrical System
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Air Cleaner And Mounting
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Battery
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Electrical System (Column Line)
| 01***20 | Bolt,(Without Maintenance Monitor) | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Electrical System (Engine Line)
| 01***16 | Screw | 4 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 3 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Electrical System (Fuse And Relay Line)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 6 |
| 01***02 | Nut (1) | 2 |
| 01***04 | Nut,(For Air Conditioner Less) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Electrical System (Light And Service Line) (1/2)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***23 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Electrical System (Light And Service Line) (2/2)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***16 | Bolt (Italy) | 4 |
| 01***30 | Screw | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Electrical System (Undercarriage Line)
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,Stopper | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Engine Mounting Part
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 16 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 14 |
| 01***00 | Bolt | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Fuel Piping (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Screw | 3 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Fuel Piping (2/2)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Left Dashboard
| 21***70 | Switch, Wheel Alignment | 1 |
| 21***90 | Warning Light Wheel Alignment | 2 |
| 21***30 | Horn | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Muffler And Piping
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Stopper | 1 |
| 01***35 | Screw | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Power Take Off
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Radiator And Piping
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***20 | Bolt,(Without Maintenance Monitor) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Right Dashboard
| 01***05 | Nut,(For Air Conditioner Less), Nut | 4 |
| 20***30 | Starting Switch,Starting | 1 |
| 21***61 | Switch, Air Conditioning | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Engine Related Parts And Electrical System : Self Supply Pump
| 01***14 | Bolt | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
| 21***70 | Pump, Assembly | 1 |
Guard And Operator'S Cab
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Cabin (1/6)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Screw | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Cabin (2/6)
| 01***04 | Nut,(For Air Conditioner Less) | 4 |
| 01***08 | Washer,(For Fixed Type Ripper) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Cabin (3/6)
| 01***70 | Screw | 2 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 10 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Cabin (4/6)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Cabin (5/6)
| 21***40 | Ring, Snap | 8 |
| 21***10 | Roof Hatch, Assembly | 1 |
| 21***20 | Pin | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Cabin (6/6)
| 21***70 | Screw | 4 |
| 21***20 | Screw | 5 |
| 21***90 | Washer | 9 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Control Valve Side Cover
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***10 | Bolt | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Electrical System (Operator'S Cab)
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Engine Side Cover
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Floor Frame (1/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***00 | Bolt | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Floor Frame (2/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 8 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Heating System
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 3 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : L.H. And R.H. View Mirror
| 01***25 | Screw | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 21***20 | Spring Washer | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Operator'S Cab (Equipment)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Operator'S Seat
| 01***14 | Screw | 4 |
| 21***60 | Washer,Spring | 4 |
| 21***01 | Operator'S Seat, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Revolving Frame Under Cover
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 21 |
| 01***32 | Washer,(With Auto Emergency Steering) | 21 |
| 21***60 | Gasket | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Guard And Operator'S Cab : Top And Front Guard (Cab)
| 01***55 | Bolt, Mount Tube To Switch Pump | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***65 | Bolt, Mount Radiator To Frame (Bottom) | 2 |
Mark Plate
Komatsu : Pw95-1(S/N 0005747-Up) : Mark Plate : Equipment
| 01***16 | Bolt (With Air Heater & Conditioner) | 0 |
| 21***80 | Washer | 0 |
| 21***20 | Pin, Cotter | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Mark Plate : Equipment (Only Tbg)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***03 | Nut,(With Joy Stick Steering) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 8 |
Komatsu : Pw95-1(S/N 0005747-Up) : Mark Plate : Mark Plate
| 01***08 | Washer,(For Fixed Type Ripper) | 2 |
| 21***40 | Nut | 2 |
| 21***20 | Plate, Max. Speed 20 Km/H (Germany) | 3 |
Komatsu : Pw95-1(S/N 0005747-Up) : Mark Plate : Rotating And Cutting Shovel Equipment
| 01***70 | Bolt,(For Rops) | 6 |
| 21***40 | Nut | 6 |
| 21***50 | Washer | 6 |
Komatsu : Pw95-1(S/N 0005747-Up) : Mark Plate : Tools
| 21***70 | Wrench | 1 |
| 21***90 | Box Wrench (32 mm) | 1 |
| 21***10 | Lever | 1 |
Swing Circle And Final Drive
Komatsu : Pw95-1(S/N 0005747-Up) : Swing Circle And Final Drive : Circle, Swing
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***10 | Bolt (Op) | 36 |
| 01***30 | Bolt | 36 |
Komatsu : Pw95-1(S/N 0005747-Up) : Swing Circle And Final Drive : Swing Machinery (1/2)
| 01***30 | Screw | 8 |
| 01***70 | Screw | 8 |
| 01***40 | Bolt,(Tm8072-123) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Swing Circle And Final Drive : Swing Machinery (2/2)
| 21***10 | O-Ring | 2 |
| 21***80 | Bearing | 1 |
| 21***90 | Bearing | 1 |
Under Carriage
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Axles Fixing
| 01***30 | Bolt,(For Rubber Shoe) | 1 |
| 01***30 | Screw | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Chassis
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 12 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Front Axle (1/6)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***10 | Screw | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Front Axle (2/6)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 21***60 | Plate | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Front Axle (3/6)
| 01***11 | Nut (Welded) | 28 |
| 21***10 | Dowel | 2 |
| 21***10 | Bearing | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Front Axle (4/6)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 24 |
| 21***60 | Nut | 4 |
| 21***40 | Fitting | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Front Axle (5/6)
| 21***30 | Spring | 96 |
| 21***40 | Spring | 8 |
| 21***50 | Ring, Wear | 8 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Front Axle (6/6)
| 21***70 | O-Ring | 1 |
| 21***80 | Tie-Rod | 2 |
| 21***90 | Steering Cylinder, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Brake Line) (1/3)
| 01***16 | Screw | 4 |
| 01***10 | Screw | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Brake Line) (2/3)
| 01***20 | Bolt,See Fig. K4010-11a0 | 1 |
| 01***16 | Bolt, Mount Solenoid Valve | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Brake Line) (3/3)
| 01***20 | Bolt,See Fig. K4010-11a0 | 6 |
| 21***60 | Union | 2 |
| 21***10 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Parking Brake)
| 21***60 | Union | 1 |
| 21***10 | Elbow | 1 |
| 21***10 | O-Ring ` | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Ppc Piping)(Chassis Side)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 21***80 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Steering Line) (Lower) (1/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***50 | Screw | 4 |
| 01***25 | Bolt - Relay Mounting | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Steering Line) (Lower) (2/2)
| 01***25 | Bolt - Relay Mounting | 4 |
| 21***80 | Union | 3 |
| 21***00 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Transmission Line)
| 21***70 | Union | 2 |
| 21***40 | Elbow | 2 |
| 21***10 | O-Ring ` | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Travel Motor Drain) (Lower)
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping (Travel Motor Line) (Lower)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
| 01***40 | Bolt,(Tm8072-123) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Hydraulic Piping Suspension Lock Cylinder Line
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 8 |
| 01***20 | Bolt,See Fig. K4010-11a0 | 5 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Propeller Shaft
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Rear Axle (1/5)
| 01***10 | Screw | 3 |
| 01***11 | Nut (Welded) | 28 |
| 21***70 | O-Ring | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Rear Axle (2/5)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 21***60 | Plate | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Rear Axle (3/5)
| 21***10 | Dowel | 2 |
| 21***10 | Bearing | 1 |
| 21***80 | Ring, Snap | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Rear Axle (4/5)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 24 |
| 21***40 | Fitting | 1 |
| 21***70 | Pin, Assembly | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Rear Axle (5/5)
| 21***20 | Screw | 2 |
| 21***40 | Brake Cylinder | 1 |
| 21***50 | Plug | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Suspension Lock Cylinder
| 21***00 | Suspension Lock Cylinder, Assembly | 2 |
| 21***10 | Kit, Gasket | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Transmission (1/3)
| 01***40 | Bolt, Mount Master Brake Cylinder | 8 |
| 21***90 | O-Ring | 2 |
| 21***80 | Washer,Spring | 8 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Transmission (2/3)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 21***80 | O-Ring | 1 |
| 21***00 | Spring Washer | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Transmission (3/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***65 | Bolt,(Except Japan) | 6 |
| 21***50 | Nut | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Under Carriage : Wheel
| 21***12 | Rim | 8 |
| 21***20 | Tyre (8.25-20 10pr) | 8 |
| 21***30 | Inner Tube (8.25-20 10pr) | 8 |
Work Equipment
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : 1st Boom
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 21***20 | Bushing | 2 |
| 21***10 | Spacer | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : 2nd Bbom Cylinder
| 01***30 | Screw | 8 |
| 21***10 | Screw | 6 |
| 21***80 | Nut | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : 2nd Boom
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***10 | Bolt,(Noise Suppression Spec.) | 2 |
| 20***40 | Spacer? 1.0mm | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : 2nd Boom Cylinder
| 01***30 | Screw | 8 |
| 21***10 | Screw | 12 |
| 21***20 | Flange | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Arm Cylinder
| 01***30 | Screw | 8 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 1 |
| 21***10 | Screw | 6 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Arm, L=1600 Mm
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 20***40 | Spacer? 1.0mm | 4 |
| 21***10 | Bushing | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Arm, L=1850 Mm
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 20***40 | Spacer? 1.0mm | 4 |
| 21***10 | Bushing | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Arm, L=2300 Mm
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 20***40 | Spacer? 1.0mm | 4 |
| 21***10 | Bushing | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Boom
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 20***40 | Spacer? 1.0mm | 2 |
| 21***50 | Nut | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Boom Cylinder
| 01***30 | Screw | 4 |
| 01***70 | Screw | 4 |
| 21***10 | Screw | 12 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Boom Cylinder (Safety Valve)
| 01***30 | Screw | 8 |
| 21***10 | Screw | 12 |
| 21***70 | O-Ring | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Boom Swing Cylinder
| 01***30 | Screw | 8 |
| 21***10 | Screw | 12 |
| 21***40 | Bushing | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Bucket
| 21***10 | Bucket L=700 mm | 1 |
| 21***20 | Bucket L=600 mm | 1 |
| 21***30 | Bucket, L=500 mm | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Bucket Cylinder
| 01***30 | Screw | 8 |
| 21***10 | Screw | 12 |
| 21***40 | Bushing | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Bucket Link
| 20***40 | Spacer? 1.0mm | 10 |
| 21***20 | Bushing | 2 |
| 21***10 | Bushing | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Front Blade
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 20***40 | Spacer? 1.0mm | 8 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Front Outrigger
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***70 | Bolt,(For Rops) | 9 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Hydraulic Piping (Additional Equipment) (Arm Side)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 21***50 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Hydraulic Piping (Additional Equipment) (Boom Side)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***45 | Bolt, Bracket Mounting | 1 |
| 21***20 | Hose | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Hydraulic Piping (Additional Equipment) (For 2-Piece Boom) (Arm Side)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 21***50 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Hydraulic Piping (Additional Equipment) (For 2-Piece Boom) (Boom Side)
| 21***60 | Union | 1 |
| 21***70 | Union, Assembly | 1 |
| 21***40 | Hose | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Hydraulic Piping (Additional Equipment) (Optional Cock)
| 21***50 | Union | 2 |
| 21***80 | Union | 1 |
| 21***10 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Hydraulic Piping (Fast Coupling Bucket Line)
| 20***40 | Spacer? 1.0mm | 4 |
| 21***80 | Pin | 2 |
| 21***80 | Union | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Hydraulic Piping (For Additional Equipment) (1/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt, Mount Valve | 2 |
| 01***45 | Screw | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Hydraulic Piping (For Additional Equipment) (2/3)
| 21***20 | Union | 1 |
| 21***60 | Elbow | 2 |
| 21***30 | Elbow | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Hydraulic Piping (For Additional Equipment) (3/3)
| 21***20 | Union | 2 |
| 21***10 | Union | 1 |
| 21***00 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Outrigger Or Blade Cylinder
| 01***30 | Screw | 8 |
| 21***10 | Screw | 12 |
| 21***40 | Bushing | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Rear Blade
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 20***40 | Spacer? 1.0mm | 8 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Rear Outrigger
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 20***40 | Spacer? 1.0mm | 16 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment : Swing Bracket
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
| 01***40 | Bolt,(With Center Guard) | 4 |
Work Equipment Control System
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Boom Overload Sensor
| 01***12 | Capscrew | 1 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 1 |
| 21***00 | Pressure Switch, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Control Valve (1/5)
| 01***10 | Nut,(Without Air Conditioner) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 21***00 | Pressure Take-Up | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Control Valve (2/5)
| 01***12 | Screw | 8 |
| 21***40 | Anticavitatiion Valve | 1 |
| 21***80 | Cover | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Control Valve (3/5)
| 01***12 | Screw | 12 |
| 21***00 | Pressure Relief Valve | 4 |
| 21***10 | Kit, Gasket | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Control Valve (4/5)
| 01***12 | Screw | 12 |
| 21***00 | Pressure Relief Valve | 6 |
| 21***10 | Kit, Gasket | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Control Valve (5/5)
| 01***12 | Screw | 8 |
| 21***00 | Pressure Take-Up | 1 |
| 21***90 | Ring, Wear | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (2nd Boom Cylinder Line)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***35 | Bolt, Mount Bracket To Floor | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (2nd Boom Cylinder Line) (Safety Valve)
| 01***30 | Bolt,(Water Separator Spec.) | 2 |
| 21***80 | Union | 2 |
| 21***20 | Elbow | 6 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Arm Cylinder Line) (For 2-Piece Boom)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 21***20 | Union | 1 |
| 21***30 | Union, Assembly | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Arm Cylinder Line) (For 2-Piece Boom) (Safety Valve)
| 01***75 | Bolt,(For Shipping) | 4 |
| 01***30 | Screw | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Arm Cylinder Line) (Safety Valve)
| 01***75 | Bolt,(For Shipping) | 4 |
| 01***30 | Screw | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Arm Line)
| 01***55 | Bolt,(10m) | 3 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Boom Cylinder Line) : Unit_02_of_02
| 01***35 | Bolt, Mount Bracket To Floor | 1 |
| 21***10 | Union | 1 |
| 21***10 | Clamp | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Boom Cylinder Line) : Unit_01_of_02
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Boom Cylinder Line) (Safety Valve) : Unit_01_of_02
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 3 |
| 21***80 | Elbow | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Boom Cylinder Line) (Safety Valve) : Unit_02_of_02
| 01***25 | Screw | 4 |
| 01***30 | Screw | 8 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Boom Cylinder Line) (With 2-Pieces Boom)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 10 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
| 21***80 | Elbow | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Boom Cylinder Line) (With 2-Pieces Boom) (Safety Val
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 9 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 3 |
| 21***80 | Elbow | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Bucket Cylinder Line)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 1 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 4 |
| 01***35 | Bolt, Mount Bracket To Floor | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Bucket Cylinder Line) (For 2-Piece Boom)
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 8 |
| 01***35 | Bolt, Mount Bracket To Floor | 4 |
| 21***90 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Bucket Cylinder Line) (Safety Valve)
| 21***30 | Elbow | 3 |
| 21***40 | Union | 1 |
| 21***70 | O-Ring | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Bucket Cylinder Line) (Safety Valve) (Cutting And Ro
| 21***30 | Elbow | 3 |
| 21***40 | Union | 1 |
| 21***70 | O-Ring | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Front And Rear Outrigger)
| 01***80 | Screw | 2 |
| 01***22 | Screw | 2 |
| 01***50 | Screw | 16 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Front Blade With Rear Outrigger)
| 01***80 | Screw | 2 |
| 01***22 | Screw | 2 |
| 01***50 | Screw | 12 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Front Blade)
| 21***20 | Union | 2 |
| 21***90 | Union | 2 |
| 21***60 | Elbow | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Oil Cooler And Return Line) (1/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***30 | Bolt,(For Rubber Shoe) | 3 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Oil Cooler And Return Line) (2/2)
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
| 21***50 | Hose-Clamp | 2 |
| 21***60 | Nut | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Outrigger Or Blade Solenoid Valve Line)
| 21***90 | Union | 3 |
| 21***30 | Elbow | 3 |
| 21***50 | Elbow | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Overload Sensor Line)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***35 | Screw | 3 |
| 01***18 | Screw | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Ppc Piping) (1/3)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Ppc Piping) (2/3) : Unit_01_of_02
| 21***60 | Union | 1 |
| 21***80 | Union | 2 |
| 21***00 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Ppc Piping) (2/3) : Unit_02_of_02
| 21***60 | Union | 1 |
| 21***80 | Union | 2 |
| 21***20 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Ppc Piping) (3/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 21***90 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Rear Blade With Front Outrigger) (1/2)
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Rear Blade With Front Outrigger) (2/2)
| 01***35 | Screw | 1 |
| 21***20 | Union | 4 |
| 21***60 | Elbow | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Rear Blade)
| 01***35 | Screw | 1 |
| 21***20 | Union | 2 |
| 21***90 | Union | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Rear Outrigger)
| 01***16 | Screw | 4 |
| 01***80 | Screw | 2 |
| 01***22 | Screw | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Steering Line) (Upper) (1/3) : Unit_01_of_02
| 01***00 | Bolt | 1 |
| 01***30 | Screw | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Steering Line) (Upper) (1/3) : Unit_02_of_02
| 01***00 | Bolt | 1 |
| 01***30 | Screw | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Steering Line) (Upper) (2/3)
| 01***30 | Bolt,(Water Separator Spec.) | 3 |
| 21***80 | Union | 1 |
| 21***90 | Union | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Steering Line) (Upper) (3/3)
| 01***35 | Bolt, Cover | 2 |
| 01***35 | Bolt, Mount Bracket To Floor | 4 |
| 21***90 | Union | 3 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Suction And Delivery Line) (1/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Screw | 16 |
| 01***45 | Screw | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Suction And Delivery Line) (2/3)
| 01***30 | Screw | 4 |
| 01***35 | Screw | 8 |
| 01***30 | Bolt,(Tm8072-121) | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Suction And Delivery Line) (3/3)
| 01***35 | Bolt, Cover | 4 |
| 01***55 | Screw | 2 |
| 01***35 | Bolt, Mount Bracket To Floor | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Swing Motor Line)
| 01***30 | Screw | 8 |
| 01***40 | Bolt,(Tm8072-123) | 12 |
| 21***40 | Elbow | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Travel Motor Line) (Upper)
| 21***90 | Union | 2 |
| 21***90 | Union | 2 |
| 21***10 | Union | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Travel Ppc Valve Line) (1/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 01***50 | Screw | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Piping (Travel Ppc Valve Line) (2/2)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 01***50 | Screw | 4 |
| 21***50 | Nut | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Pump (1/7)
| 21***00 | Pump, Assembly | 1 |
| 21***20 | Kit, Gasket Pump | 1 |
| 21***50 | Cover | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Pump (2/7)
| 21***70 | Piston | 1 |
| 21***80 | Fork | 1 |
| 21***90 | Cylinder | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Pump (3/7)
| 21***40 | O-Ring | 1 |
| 21***50 | O-Ring | 1 |
| 21***60 | Pressure Control Valve, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Pump (4/7)
| 21***30 | Rotary Group, Assembly | 1 |
| (2***0) | Pump, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Pump (5/7)
| 21***20 | R.H. Rotary Group, Assembly | 1 |
| (2***0) | Pump, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Pump (6/7)
| 21***10 | L.H. Rotary Group, Assembly | 1 |
| (2***0) | Pump, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Pump (7/7)
| 21***30 | Ring Kit | 1 |
| 21***90 | Rotary Group Hydraulic Part, Assembly | 1 |
| (2***0) | Pump, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Hydraulic Tank
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Ppc Valve (Arm And Swing)
| 21***31 | Rubber | 1 |
| 21***31 | Lever | 1 |
| 21***30 | Articulation | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Ppc Valve (Boom And Bucket)
| 21***31 | Rubber | 1 |
| 21***33 | Knob, Assembly | 1 |
| 21***30 | Articulation | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Ppc Valve (For 2nd Boom)
| 01***20 | Screw | 1 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 2 |
| 21***10 | Ppc Valve, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Ppc Valve (For Boom Swing)
| 01***20 | Screw | 1 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 2 |
| 21***90 | Dowel | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Ppc Valve (For Outrigger And Blade)
| 01***35 | Bolt, Mount Valve | 2 |
| 01***03 | Nut,(With Joy Stick Steering) | 2 |
| 21***00 | Blade Ppc Valve, Assembly | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Ppc Valve (For Travel)
| 01***30 | Bolt,Stopper | 1 |
| 01***18 | Screw | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Swing Motor (1/2)
| 21***00 | Swing Motor, Assembly | 1 |
| 21***70 | O-Ring | 1 |
| 21***30 | Valve, Assembly | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Swing Motor (2/2)
| 21***30 | Rotary Group, Assembly | 1 |
| 21***40 | Gasket | 1 |
| 21***50 | O-Ring | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Swivel Joint
| 01***16 | Screw | 7 |
| 21***70 | Kit, Cable | 1 |
| 21***40 | Screw | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Travel Motor (1/2) : Unit_02_of_02
| 21***01 | Travel Motor, Assembly | 1 |
| 22***10 | Ring, Snap | 1 |
| 22***20 | Ring, Snap | 1 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Travel Motor (1/2) : Unit_01_of_02
| 21***00 | Travel Motor, Assembly | 1 |
| 21***20 | Ring Kit | 1 |
| 21***50 | Spring Guide 8.6 mm | 0 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Travel Motor (2/2) : Unit_01_of_02
| 21***80 | Piston | 1 |
| 21***90 | Pin | 1 |
| 21***10 | Ring | 2 |
Komatsu : Pw95-1(S/N 0005747-Up) : Work Equipment Control System : Travel Motor (2/2) : Unit_02_of_02
| 21***20 | Counter Balance Valve, Assembly | 1 |
| 21***30 | Kit, Gasket | 1 |
| 21***40 | Relief Valve, Assembly | 2 |
Frequently asked questions
What engine does the Komatsu PW95-1 use?
The PW95-1 (S/N 0005747-Up) is powered by a Perkins 1004-4, a four-cylinder diesel displacing 3.99 liters and rated 56 kW (75.1 hp) gross at 2000 rpm. This differs from the later PW95R-2, which is built on a different chassis and engine generation.
What is the operating weight of the Komatsu PW95-1?
Operating weight runs approximately 9.5 to 9.8 tonnes (21,000-21,600 lb), depending on blade, outrigger, and counterweight configuration.
What replaced the Komatsu PW95-1?
Komatsu ended PW95-1 production in 1999 and replaced it in 2000 with the PW95R-2, a revised-chassis wheeled excavator in the same weight class.
What PW95-1(S/N 0005747-Up) owners discuss
What's the usual complaint about hydraulic response on an older PW95-1, and what typically causes it?
Owners running these well past 10,000 hours report the boom, arm, and bucket feeling soft or slow to respond, especially right after startup. The load-sensing hydraulic circuit relies on a small membrane-type accumulator in the engine bay to keep pressure ready; once its diaphragm weakens or the nitrogen charge bleeds down, response goes soft and stays soft even after topping off oil. Confirm main pump flow and LS delta-P against the test spec before replacing cylinders or the pump itself. A tired accumulator is a cheaper and more common culprit.
The machine holds engine rpm steady but bogs down and loses drive power on any incline. What's going on?
This points to the hydraulic side, not the engine. Because the Perkins engine speed is governed independently of load, rpm can look normal while the main pump simply isn't putting out the flow or pressure needed to hold speed once gravity adds resistance. Check pump output and load-sensing regulation against spec before assuming an engine problem. A pump nearing the end of its service life shows the same symptom on level ground under heavy digging load.
What are the known quirks of the Perkins engine series used in this machine?
It's a mechanically governed diesel with no electronic engine controls, so there's no fault-code history to lean on for diagnosis. The injection pump's front shaft seal and the mechanical lift pump diaphragm are known wear points on this engine family; when they start to weep, fuel or oil cross-contaminates the crankcase, so a rising oil level or a fuel smell on the dipstick is the tell. The throttle and governor linkage on the injection pump can also wear or bind over time, capping the engine well below rated rpm even though the engine itself is otherwise healthy. Work the linkage free and check its travel before chasing a power complaint into the injection pump.
What wear shows up on the axles, tires, and steering gear typical of this class of wheel excavator?
Like other wheel excavators in this size class, the front axle oscillates for ground contact and is locked hydraulically once the blade or outriggers go down for digging stability. On an older machine, confirm the lock actually engages and holds; a lazy or leaking lock cylinder lets the chassis rock under load. Steering king pins and axle pivot bushings loosen with age and show up as play in the wheels or wander in steering. Tire wear is often uneven on machines that spent most of their life digging in one spot rather than traveling, so tread condition alone says little about total hours.
What electrical or sensor problems come up most on a machine this age?
There is no ECM and nothing to plug a diagnostic scanner into; this generation runs on analog gauges and mechanical engine controls. Most complaints trace back to age rather than a design fault: corroded or loose connectors, brittle wiring insulation, and drifting or failed temperature and oil-pressure senders that give false gauge readings rather than reflect an actual engine problem. Check the harness and grounds with a meter before swapping a gauge or sender on a hunch.
Does this machine have anything safety-related in the hydraulic system besides the main work circuit?
Yes. Travel braking is backed by a pair of pressure accumulators mounted under the cab, separate from the main implement hydraulics. They keep braking available briefly if engine-driven pump pressure is lost. On an older machine, don't assume they're still charged and functional just because the service brakes feel fine at idle; loss of accumulator pressure isn't something an operator can judge by pedal feel alone. Have your dealer verify accumulator charge and brake circuit function before returning the machine to regular duty.
What should a buyer check before purchasing a used PW95-1 (S/N 0005747-Up)?
Run every function (boom, arm, bucket, swing, travel, steering) under load and watch for drift, softness, or hesitation that points to pump or cylinder wear. Check engine oil for a rising level or a fuel smell that would indicate a leaking injection pump seal or lift pump diaphragm. Confirm the front axle oscillation lock engages and holds, and check king pins, axle pivot bushings, and tie rods for play. Inspect the wiring harness and connectors for age-related corrosion, and don't judge engine health from gauge readings alone. Ask for service history; on a machine this old, undocumented hour meters and swapped components are common. Because travel braking depends on hydraulic accumulators rather than a simpler mechanical system, have your dealer verify accumulator charge and brake function as part of any pre-purchase inspection.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific PW95-1(S/N 0005747-Up) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.