Komatsuhydraulic excavatormedium (pc100 - pc270)

Komatsu PW150-1(S/N 1001-UP)

Maintenance schedule, common problems & OEM parts breakdown

The Komatsu PW150-1 (S/N 1001-UP) is a mid-size wheeled hydraulic excavator built from 1987 to 1992, covered by one continuous production block with no lettered serial prefix. It runs a Komatsu 6D95L-1 series six-cylinder diesel, mechanically governed and rated around 65 kW (87 HP), driving front and rear steering axles instead of tracks. Operating weight is roughly 15.5 t (34,170 lb) on 10.00-20 tires, with a standard 0.62 m3 (0.81 cu yd) bucket. The chassis carries a rear outrigger as standard with an optional front outrigger, plus a front blade for stabilizing and light grading, pointing to a machine built for road-mobile utility and municipal digging rather than heavy production earthmoving. The "-1" suffix follows Komatsu's usual first-generation naming for this line; no earlier PW150 predecessor is documented.

Komatsu did not carry the PW150 name forward on a continuous path: production of this generation ended in 1992, and the name did not reappear until the PW150-6 and PW150ES-6 generations arrived years later on a different chassis, with a different engine and a lettered serial-prefix system in place of the plain numeric block used here. That gap makes the PW150-1 a standalone vintage machine rather than an early step in one continuously evolving line, and buyers should not assume parts or specs carry over from the later generation. In today's used and parts market it is a scarce find: low original production volume and decades of field use mean surviving units are valued mainly for straightforward mechanical serviceability. With no ECM and no fault-code system, diagnosis and repair fall back on classic mechanical-diesel methods, and parts sourcing runs through the factory shop manual and general 6D95L-family component cross-references rather than any later PW150 generation.

Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.

Komatsu PW150-1(S/N 1001-UP) specifications

Engine

Engine model	Komatsu 6D95L — 6-cylinder inline, water-cooled, direct-injection diesel
Displacement	4.89 L (95 mm bore x 115 mm stroke, 6 cylinders)
Power output	65 kW (87 HP) rated output as fitted to this chassis; gross/net distinction not specified in the factory sheet
Emissions tier	Pre-regulation build (produced 1987-1992); no formal off-highway emissions tier applies to this serial range
Series/serial note	Specs apply to S/N 1001-UP per the factory shop manual for this range. No mid-run engine change documented for this serial block

Weights

Operating weight	15.5 t (15,500 kg / approx. 34,170 lb), standard configuration
Variant/long-undercarriage configs	Not documented — sources show a single standard wheeled configuration, no long-chassis or heavy-duty variant listed
Transport weight	Not documented separately from operating weight in available sources

Dimensions

Transport length	8.75 m (28 ft 8 in)
Transport width	2.45 m (8 ft 0 in)
Transport height	3.03 m (9 ft 11 in)
Undercarriage/running gear	Wheeled chassis on rubber tires with steering axles, not a crawler undercarriage — standard tire size 10.00-20. Track shoe width, tail swing radius, ground clearance, and crawler undercarriage length are not published for this wheeled type and were not found in available sources

Performance

Standard bucket capacity	0.62 m3 (0.81 cu yd)
Max dig depth	Not documented for this exact serial range in available sources — verify with your dealer or the factory shop manual
Max reach at ground / max dump height / max cutting height	Not documented for this exact serial range in available sources — verify with your dealer or the factory shop manual
Swing speed / travel speed / gradeability / drawbar pull	Not documented for this exact serial range in available sources — verify with your dealer or the factory shop manual

Forces

Bucket digging force	Not documented for this exact serial range in available sources — verify with your dealer or the factory shop manual
Arm/stick digging force	Not documented for this exact serial range in available sources — verify with your dealer or the factory shop manual

Service capacities (summary)

Fuel tank	Not documented for this exact serial range in available sources — verify with your dealer or the factory shop manual
Hydraulic system/tank	Not documented for this exact serial range in available sources — verify with your dealer or the factory shop manual
Engine oil	Not documented for this exact serial range in available sources — verify with your dealer or the factory shop manual
Cooling system	Not documented for this exact serial range in available sources — verify with your dealer or the factory shop manual

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

PW150-1(S/N 1001-UP) fluids & capacities

System	Capacity	Recommended fluid
Engine crankcase (with filter)	Not documented in publicly available sources for S/N 1001-UP — confirm exact refill volume with the factory shop manual or your dealer.	Komatsu Genuine engine oil (EO series), graded by ambient temperature per the OMM viscosity chart: SAE 10W in sub-zero climates, SAE 30 or 10W-30 in temperate ranges, SAE 15W-40 in hot climates. Formulated to the Komatsu Engineering Standard for diesel engine oil.
Cooling system	Not documented in publicly available sources for S/N 1001-UP — confirm exact refill volume with the factory shop manual or your dealer.	Permanent-type ethylene-glycol antifreeze coolant with corrosion inhibitors (Komatsu Genuine Super Coolant AF-NAC lineage). Mix ratio set by the coldest expected ambient temperature per the OMM freeze-point chart.
Fuel tank	Not documented in publicly available sources for S/N 1001-UP — confirm exact refill volume with the factory shop manual or your dealer.	No. 2-D diesel fuel for normal operating temperatures; No. 1-D or a winter blend below freezing, per OMM guidance. Low sulfur content recommended to protect the fuel system.
Hydraulic system total (and hydraulic tank)	Not documented in publicly available sources for S/N 1001-UP — confirm exact refill volume with the factory shop manual or your dealer.	Komatsu Genuine hydraulic oil (HO series), general-duty ISO VG46 grade; a lighter VG32-equivalent grade specified for cold-climate operation per the OMM viscosity chart.
Final drive / axle (each)	Not documented in publicly available sources for S/N 1001-UP — confirm exact refill volume with the factory shop manual or your dealer.	Komatsu Genuine axle oil (AXO80, SAE 80W gear oil) for the wheeled axle/final-drive units with wet brakes, or Komatsu Genuine powertrain oil (TO series) where the OMM specifies it in place of axle oil.
Swing drive (machinery case)	Not documented in publicly available sources for S/N 1001-UP — confirm exact refill volume with the factory shop manual or your dealer.	Komatsu Genuine powertrain oil (TO30, SAE 30W grade), the standard fill for Komatsu excavator swing-drive reduction cases.
Pilot / other circuits	No separate pilot-circuit reservoir is listed for this machine — pilot oil draws from the main hydraulic tank supply.	Same as hydraulic system — Komatsu Genuine hydraulic oil (HO series).
Grease (spec only)	Not a fill-capacity item — serviced per the OMM lubrication interval schedule at individual grease points.	Komatsu Genuine multipurpose lithium-base grease (NLGI No. 2) for general chassis, pin, and bushing points; a molybdenum-disulfide grease where the OMM calls for extra load protection on work-equipment pins.

Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.

Komatsu PW150-1(S/N 1001-UP) maintenance schedule

Service interval	Tasks
Every 50 h	Check engine oil and coolant level before starting; top off as needed. Walk around the machine for fuel, oil, coolant, and hydraulic leaks, checking closely around the swing drive and axle housings. Check tire condition and inflation on all four wheels; look for feathering or one-sided wear. Grease boom, arm, and bucket linkage pins, plus the outrigger and blade pivot points. Drain water and sediment from the fuel tank and fuel/water separator. Check outrigger and blade operation before starting work.
Every 250 h	Change engine oil and replace the engine oil filter. Clean or replace the air cleaner element. Grease the swing bearing and swing pinion. Check steering kingpin and tie-rod play on the front axle. Check alternator/fan belt tension and battery electrolyte level. Inspect driveshaft U-joints between the transmission and axles for play.
Every 500 h	Replace the hydraulic tank return filter element. Check front and rear axle (final drive) oil level; watch for water or grit given wet-brake exposure. Replace the fuel filter cartridge. Check transmission (torque-converter/powershift) oil level. Check wheel bearing adjustment and wet-brake condition. Check swing drive (machinery case) oil level.
Every 1,000 h	Change front and rear axle (final drive) oil. Change swing drive oil. Change or top off transmission (torque-converter/powershift) oil and clean the strainer. Inspect the steering cylinder, kingpins, and tie-rod ends; rock the front axle to check for play. Check injection pump timing and injector condition if smoke or rough running appears. Check starter and alternator brush wear.
Every 2,000 h	Change hydraulic tank oil and clean the suction strainer. Change transmission (torque-converter/powershift) oil and clean the strainer. Check engine valve clearance. Rock the upper structure against the frame to check swing bearing play. Check or replace the cooling system's anti-corrosion resistor element. Check outrigger and blade cylinder seals for leakage.
Every 4,000 h	Inspect the swing bearing and swing pinion for wear limits; replace if play exceeds factory tolerance. Inspect or rebuild the front and rear axle final drives and differential gearing. Inspect the hydraulic pump and main control valve for relief-pressure drop and spool wear. Inspect the cylinder head, injectors, and injection pump for overhaul given the mechanical fuel system's age. Replace steering kingpin bushings and tie-rod ends as a set.

Servicing the PW150-1(S/N 1001-UP) beyond the schedule

Predictive Maintenance & Fluid Analysis

This 6D95L-1 predates any ECM, so there are no fault codes or telematics to lean on - fluid sampling is the early-warning system. Pull scheduled samples of engine oil, transmission (torque-converter/powershift) oil, front and rear axle oil, and swing drive oil, watching for water or grit in the axle oil from wet-brake and road exposure. Track hydraulic oil condition closely too; contaminated hydraulic oil is a common root cause of premature swing-motor and pump wear on machines that have gone long stretches between changes.

Corrective & Common Repairs

Steering kingpin and tie-rod wear on the front axle shows up as feathered or one-sided tire wear and looseness felt through the steering in turns - inspect before condemning tires. Driveshaft U-joints between the transmission and axles wear with age and mileage. Swing-bearing and swing-pinion play produces a knock on swing start/stop. On the mechanically injected 6D95L-1, black smoke under load and hard cold starts usually trace to injector wear or injection-pump timing drift, not electronics.

Overhaul & Rebuild Points

Machines at this age are candidates for driveline rebuild, not routine service. Front and rear axle final drives and differential gearing wear from decades of road travel and warrant inspection at major hours, along with the swing bearing and pinion. Check the hydraulic pump and main control valve for relief-pressure drop and spool wear if digging force fades once fully warm. On the engine side, plan for injection-pump and cylinder-head overhaul given the mechanical fuel system's age, and replace kingpin bushings and tie-rod ends as a set.

Seasonal & Environment Servicing

Cold climates call for a lighter engine oil and hydraulic oil grade per the OMM viscosity chart, plus attention to the cooling system's anti-freeze concentration and anti-corrosion resistor element - this machine has no glow-plug/ECM cold-start assist beyond the mechanical system. In wet or muddy conditions check axle housing seals and breathers for grit ingress, since wheeled axles take road and jobsite debris that a tracked undercarriage would not. On wheeled ground work, keep tire pressure matched to load and terrain - it substitutes for the flotation a crawler undercarriage provides.

PW150-1(S/N 1001-UP) common service parts

Part number	Part	Notes
07281-00197	Clamp,(With Pre-Fuel Filter)	Fuel system service	Check fitment →
09637-30161	Plate? Instruction,Air Cleaner (Single Element)	Air intake service	Check fitment →
07000-02135	O-Ring,Hydraulic Oil Filter	Hydraulic service	Check fitment →
07000-05155	O-Ring,Hydraulic Oil Filter	Hydraulic service	Check fitment →
07063-01100	Element,Hydraulic Oil Filter	Hydraulic service	Check fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

PW150-1(S/N 1001-UP) fault codes & troubleshooting

Code	Meaning	Likely cause	What to do
Engine oil pressure lamp (red)	Engine lubrication pressure has dropped below the safe minimum	Low oil level, worn oil pump, clogged filter, or failed pressure sender/wiring	Stop engine immediately, check oil level and sender wiring before restart
Coolant temperature lamp (red)	Engine coolant has exceeded normal operating temperature	Low coolant level, blocked radiator fins, slipping or broken fan belt, faulty thermostat	Idle engine down, let cool, check coolant level and radiator; do not remove cap while hot
Charge lamp (red)	Alternator is not charging the battery circuit	Loose or broken fan/alternator belt, faulty alternator, corroded battery or ground wiring	Check belt tension and battery connections, test alternator output
Air cleaner restriction lamp (amber)	Engine intake air filter is clogged, restricting airflow	Dirty or saturated air filter element, blocked intake ducting	Inspect and clean or replace the air cleaner element
Hydraulic oil temperature lamp	Hydraulic tank oil has exceeded normal operating temperature	Low hydraulic oil level, clogged oil cooler, sustained high-load operation, internal pump/relief valve wear	Reduce load and idle down, check oil level and inspect cooler for blockage before resuming work
Brake/steering accumulator charge lamp with buzzer	Charge pressure in the accumulator-backed brake or steering circuit has dropped below the safe threshold	Charge pump wear, accumulator gas-side or seal leakage, low hydraulic reservoir level	Do not travel the machine; check charge pump output and accumulator precharge per the shop manual procedure

Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.

PW150-1(S/N 1001-UP) attachments & work tools

Buckets

Factory bucket capacity for this machine runs 0.62-0.65 m³ with the standard 2.6 m arm. General-duty buckets for a wheel excavator in this 15.5 t class typically span roughly 0.5-0.7 m³ at widths near 900 to 1050 mm; heavy-duty and rock buckets in the same width class drop to roughly 0.4-0.55 m³ because of thicker plate and reinforced sidewalls. Mounting is pin-on as standard; coupler-mounted buckets are a dealer/aftermarket fitment rather than a documented factory print for this generation. Bucket pin diameter is not published for this exact serial range - the 14-16 t weight class commonly runs 70-75 mm pins, but confirm against your actual stick/bucket linkage before ordering.

Hydraulic hammers

This 15.5 t class carrier lines up with a medium-class hydraulic hammer, roughly 900 to 1300 kg operating weight, matching the same bracket used for other 14-16 t excavators. Exact fit varies by breaker brand and mounting bracket, so confirm carrier weight class and flow/pressure specs with the breaker supplier before ordering.

Quick couplers

No factory Komatsu quick-coupler print is documented for this serial range - Komatsu's current genuine coupler line is built for the later -6K generation of this size class, not this one. Couplers actually fitted to 15.5 t class carriers are generally aftermarket pin-grabber units (mechanical wedge/hook or hydraulic) sized to the 10-16 t weight bracket used across the industry's symmetrical-coupler charts. Confirm stick pin centers and bucket pin diameter against the coupler before purchase.

Thumbs/grapples

Hydraulic thumb kits sized for a 14-16 t excavator are a common aftermarket add-on, pinned off the stick/bucket linkage and sized to the bucket pin diameter; none is documented as a factory option for this serial range. Grapple attachments are less common on a wheel excavator of this size and are not documented for this model - verify fitment and hydraulic demand with the attachment supplier before ordering.

Rippers

No ripper attachment is documented for this wheel excavator. Rear ripper shanks are typically a crawler-dozer or track-excavator fitment; this machine's undercarriage and front stabilizer/blade arrangement are not set up for a rear ripper, so treat this as not applicable unless your dealer confirms an aftermarket adaptation.

Hydraulic-kit notes

Machines of this vintage did not all leave the factory with auxiliary breaker/attachment piping - some units have a factory single- or double-acting auxiliary circuit routed to the boom, others need it added at the dealer before a hammer or other powered attachment can be run. Confirm whether your unit already has the auxiliary valve and boom piping installed, and match circuit type (single- vs double-acting) to the attachment before purchase. High-flow circuits for flow-hungry attachments are not a feature of this generation.

All PW150-1(S/N 1001-UP) assemblies by section

Every catalogued assembly group for the Komatsu PW150-1(S/N 1001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

6d95l-1c Engine S/N 10001-Up

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Air Cleaner

04***10	Ring,See Fig. K4010-65a0	1
09***61	Plate? Instruction,Air Cleaner (Single Element)	1
09***61	Plate? Instruction,(German-English) (Not Shown)	1
09***61	Plate? Instruction,(Chinese) (Not Shown)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Air Compressor

62***00	Air Compressor Ass'Y	1
DK***21	Cylinder Head Ass'Y	1
DK***00	Bearing	2
DK***00	Cap	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Air Compressor And Piping

07***16	Gasket,Air Compressor Piping	1
07***89	Clamp,(For Japan)	2
08***36	Band,(For 2nd Travel Speed) (Op)	1
61***30	Elbow,(For Pc200)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Air Intake Manifold And Connection(#10001-43219)

01***12	Bolt	2
01***20	Bolt,(For Japan Pc200)	2
01***25	Bolt,(With Corrosion Resistor)	3
01***30	Screw	11

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Air Intake Manifold And Connection(#43220-)

01***12	Bolt	2
01***20	Bolt,(For Japan Pc200)	2
01***25	Bolt,(With Corrosion Resistor)	3
01***30	Screw	10

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Alternator (25a)(#10001-19676)

60***40	Alternator A. (25a),(See Fig.0641)	1
KD***52	Bolt,Through	3
KD***70	Rear Bracket Ass'Y	1
KD***70	Retainer	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Alternator (25a)(#19677-)

60***30	Alternator A. (25a),(With Non Hardening Pulley)	1
KD***57	Bearing,Ball? Front	1
KD***11	Rear Bracket Ass'Y	1
KD***90	Nut	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Alternator (35a) (Tropical Sandy And Dusty Spec.)(#10001-36168)

60***40	Alternator A. (35a),(With Hardening Pulley)	1
KD***57	Bearing,Ball? Front	1
KD***80	Collar	1
KD***70	Rear Bracket Ass'Y,Rear	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Alternator (35a) (Tropical Sandy And Dusty Spec.)(#36169-)

60***90	Alternator A. (35a)	1
KD***57	Bearing,Ball? Front	1
KD***80	Collar	1
KD***30	Retainer	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Alternator And Mounting (25a)(#10001-19676)

01***30	Bolt,(For Trimming Dozer)	1
01***55	Bolt,(With Engine Stop Motor Type)	1
01***11	Nut,(For Center Guard)	1
01***36	Washer,Radio Controlled Slag Handling	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Alternator And Mounting (25a)(#19677-)

01***30	Bolt,(For Trimming Dozer)	1
01***60	Screw	1
01***11	Nut,(For Center Guard)	1
01***36	Washer,Radio Controlled Slag Handling	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Alternator And Mounting (35a) (Tropical Sandy And Dusty Spec.)

01***60	Bolt	1
01***30	Bolt,(For Trimming Dozer)	1
01***70	Bolt	1
01***10	Nut	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Camshaft And Tappet(#10001-10033)

01***20	Screw	2
04***16	Fitting Wedge	1
61***30	Plate,Thrust	1
62***20	Gear,Camshaft	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Camshaft And Tappet(#10034-)

01***20	Screw	2
04***16	Fitting Wedge	1
62***10	Tappet	12
62***10	Tappet Rod	12

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Corrosion Resistor And Piping

01***14	Bolt,(With Corrosion Resistor)	3
01***20	Bolt,(For Japan Pc200)	2
01***40	Bolt	2
01***60	Bolt	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Crankshaft

01***45	Bolt,Nylock	1
01***16	Bolt,(With Alternator Cover Type)	6
61***11	Bolt,Nylock (K2)	1
61***20	Collar,Taper	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Cylinder Block

01***16	Screw	5
01***06	Nut	1
01***10	Washer,See Fig. K4010-12a0	1
04***20	Pin,Dowel (Welded)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Cylinder Head

01***20	Bolt, Hose Clamps (Inlet And Return Line Hoses)	4
01***32	Washer,(Not Used With Emergency Str.)	25
01***32	Washer, (Without Emergency Steering)	25
02***04	Plug, Pipe	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Cylinder Head Cover

61***10	Cap, Oil Filler	1
61***20	Screw	4
61***30	Washer,(B)	4
61***42	Packing,Cylinder Head Cover	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Exhaust Manifold And Muffler

01***80	Bolt, Mount Strainer Flange	1
01***25	Grub Screw	4
01***25	Bolt, Mount Engine Oil Drain To Fuel Tank	4
01***30	Bolt - Lower Oil Cooler Outlet Tubemounting	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Flywheel And Flywheel Housing

01***30	Bolt	6
01***30	Bolt - Lower Oil Cooler Outlet Tubemounting	11
01***05	Screw	2
07***15	Plug	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Front Cover And Gear

01***70	Bolt,(For 75a Alternator)	1
01***20	Bolt,(With Tachometer Outlet)	8
01***16	Screw	2
01***55	Bolt,(With Engine Stop Motor Type)	9

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Filter And Piping

01***12	Bolt	1
01***16	Screw	1
01***65	Bolt,(With Water Separator)	2
01***20	Bolt	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Coupling)

DK***20	Plate	1
DK***00	Bolt	2
DK***00	Bolt	1
DK***00	Coupling,Cross	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Coupling) (Regulation Of Sweden)

DK***20	Plate	1
DK***00	Bolt	2
DK***00	Bolt	1
DK***00	Coupling,Cross	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Feed Pump)

DK***20	Bolt, Joint	1
DK***00	Valve,Check	2
DK***20	Pump,Priming	1
DK***00	Adapter	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Feed Pump) (Regulation Of Sweden)

DK***20	Bolt, Joint	1
DK***00	Valve,Check	2
DK***20	Pump,Priming	1
DK***00	Adapter	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Governor) (1/2)

DK***00	Adapter	1
DK***00	Nut,Lock	1
DK***00	Housing	1
DK***10	Shim? 0.20mm,(High Altitude Spec.), Shim, 0.20mm; Was Dk029311-0010	0

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Governor) (1/2) (Regulation Of Sweden)

DK***00	Adapter	1
DK***00	Nut,Lock	1
DK***00	Housing	1
DK***10	Shim? 0.20mm,(High Altitude Spec.), Shim, 0.20mm; Was Dk029311-0010	0

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Governor) (2/2)

DK***40	Gasket,Air Compressor	2
DK***00	Nut,Cap	1
DK***40	Bolt	2
DK***10	Key? 13mm,Woodruff	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Governor) (2/2) (Regulation Of Sweden)

DK***40	Gasket,Air Compressor	2
DK***00	Nut,Cap	1
DK***00	Bushing	1
DK***40	Bolt	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Pump) (1/2)

62***40	Injection Pump Ass'Y	1
DK***30	Key,Woodruff	1
DK***30	Bearing	1
DK***20	Shim, 1.40mm; Was Dk029311-7220, Shim? 1.4mm	0

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Pump) (1/2) (Regulation Of Sweden)

62***60	Injection Pump Ass'Y	1
DK***30	Key,Woodruff	1
DK***30	Bearing	0
DK***20	Shim, 1.40mm; Was Dk029311-7220, Shim? 1.4mm	0

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Pump) (2/2)

DK***40	Shim? 0.50mm, Shim, 0.50mm; Was Dk029311-0040	0
DK***90	Shim? 0.25mm, Shim, 0.25mm; Was Dk029311-0590	0
DK***00	Sleeve,Control	6
DK***30	Shim? 1.45mm, Shim, 1.45mm; Was Dk029311-0630	0

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump (Pump) (2/2) (Regulation Of Sweden)

DK***40	Shim? 0.50mm, Shim, 0.50mm; Was Dk029311-0040	0
DK***90	Shim? 0.25mm, Shim, 0.25mm; Was Dk029311-0590	0
DK***00	Sleeve,Control	6
DK***30	Shim? 1.45mm, Shim, 1.45mm; Was Dk029311-0630	0

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Injection Pump And Piping

01***25	Bolt, Mount Engine Oil Drain To Fuel Tank	4
01***25	Screw	4
01***65	Bolt,(For 35a? 25a Alternator)	4
01***16	Bolt,(With Alternator Cover Type)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Fuel Nozzle And Spill Pipe

01***35	Bolt, Mount Bracket To Floor	6
07***10	Tube,(See Fig.0421-14)	5
07***35	Tube,Spill	1
62***10	Carrier	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Gasket Kit

01***16	Washer,Lock? Injection Gear	1
07***85	O-Ring,(Without Fuel Level Gauge)	1
07***00	O-Ring,(F4350-65a1 -5 )	1
07***35	O-Ring,Hydraulic Oil Filter	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Gasket Kit (With Corrosion Resistor)

01***16	Washer,Lock? Injection Gear	1
07***85	O-Ring,(Without Fuel Level Gauge)	1
07***00	O-Ring,(F4350-65a1 -5 )	1
07***35	O-Ring,Hydraulic Oil Filter	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Heater Switch And Heater Signal

60***30	Signal,Engine Pre Heater	1
60***80	Cap	1
60***90	Cap	3
(6***0)	Switch,Heater (See Fig.0131 Or 0131a)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Lubricating Oil Cooler(#10001-52968)

01***25	Bolt,(With Corrosion Resistor)	18
01***06	Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806	4
01***06	Nut	4
01***25	Washer,Spring?For Additional Rear Lam	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Lubricating Oil Cooler(#52969-)

01***25	Bolt,(With Corrosion Resistor)	18
01***06	Nut	4
07***12	T/Plug, Plug,(For Power Tilt Mech Angle)	1
60***20	Element	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Lubricating Oil Filter And Mounting

01***25	Bolt,(With Corrosion Resistor)	4
07***70	O-Ring,Front Cover	1
60***40	Cartridge,Engine Oil Filter (D31s)	1
60***41	Cartridge,Engine Oil Filter (D31s)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Lubricating Oil Pump And Suction Pipe

01***12	Bolt,(See Fig.0501)	1
01***16	Screw	6
01***25	Bolt,(With Corrosion Resistor)	1
62***10	Valve	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Oil Pan(#10001-33694)

01***14	Bolt	2
01***16	Screw	30
07***30	O-Ring,Case? Magnet Ass'Y	1
62***90	Plug,Drain	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Oil Pan(#33695-74212)

01***14	Bolt,(W/Joy Stick Str.)(W/O Heater)	30
01***14	Bolt	30
07***16	Gasket,(For Pc750-6) (See Fig.A2110)	1
62***80	Plug,Drain	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Oil Pan(#74213-)

01***14	Bolt,(W/Joy Stick Str.)(W/O Heater)	30
01***14	Bolt	2
07***30	O-Ring,Case? Magnet Ass'Y	1
07***16	Gasket,(For Pc750-6) (See Fig.A2110)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Piston And Connecting Rod

04***12	Ring, Snap	12
62***21	Piston (S)	6
62***00	Piston Ring Ass'Y,Per Cylinder	6
62***02	Piston Ring Ass'Y,Per Cylinder	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Power Take Off

(0***5)	Ring,Snap	1
(2***0)	Coupling	1
(0***0)	Bolt,(See Fig.Engine Wiring)	12
(0***0)	Bolt	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Rocker Arm

01***12	Bolt,(Without R.P.C.U.)	1
01***65	Bolt,(For Alternator Bracket Mount)	8
61***30	Nut	12
61***20	Spring,Conical	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Starting Motor (5.5kw)

60***30	Starting Motor Ass'Y,(5.5kw)	1
KD***30	Bracket,Center	1
KD***10	Field Coil Ass'Y	1
KD***10	Magnetic Switch A	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Starting Motor And Mounting (5.5kw)

01***30	Bolt	3
07***00	O-Ring,(F4350-65a1 -5 )	1
(6***0)	Starting Motor Ass'Y,(5.5kw) (See Fig.0661)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Water Pump And Cooling Fan

01***35	Bolt,(For Quick Shift) (Mitsubishi)	6
01***16	Screw	5
01***20	Screw	2
01***30	Bolt,(Water Separator Spec.)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Water Pump And Cooling Fan (Tropical Sandy And Dusty Spec.)

01***35	Bolt,(For Quick Shift) (Mitsubishi)	6
01***16	Screw	5
01***20	Screw	2
01***30	Bolt,(Water Separator Spec.)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : 6d95l-1c Engine S/N 10001-Up : Water Separator

07***60	O-Ring,(For Pc750?800?1800) (A2610)	1
60***00	Water Separator A.,(See Fig.2415)	1
60***10	Cover	1
60***20	Case	1

See all parts with full part numbers in Heavy Parts AI →

Axle? Wheels And Steering System

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Air Master

20***10	Repair Kit,Air Master	1
20***70	Air Master Ass'Y	1
JK***83	Nut	1
JK***94	Shell Ass'Y	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Brake Valve

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Drive Shaft(#1001-1283)

01***36	Wahser-Spring, Washer,Spring (Without Towing Winch)	12
20***00	Drive Shaft Ass'Y	2
20***10	Yoke	1
20***20	Spider	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Drive Shaft(#1284-)

01***36	Wahser-Spring, Washer,Spring (Without Towing Winch)	12
20***00	Drive Shaft Ass'Y	2
20***10	Yoke Shaft Ass'Y	1
20***20	Fitting,Grease	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Front Axle (Axle Housing)

04***34	Pin-Dowel, Pin,Dowel (For Shipping)	1
04***60	Screw, Serial Number Plate	4
07***34	O-Ring, O-Ring,Drain Plug? R.H. Half Tank	2
07***30	Breather	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Front Axle (Caliper)(#1001-1424)

20***03	Brake Ass'Y,Front Axle L.H.? Front	2
20***05	Brake Ass'Y,R.H.?Front?L.H.?Rear	2
20***06	Brake Ass'Y,R.H.?Front?L.H.?Rear	2
20***11	Caliper Ass'Y	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Front Axle (Caliper)(#1425-)

01***06	Nut, (Service Parts)	2
20***07	Brake Ass'Y,L.H. Front? R.H. Rear (Front)	1
20***12	Caliper Ass'Y,L.H. Front? R.H. Rear (Front)	1
20***30	Breather,Bleed	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Front Axle (Differential)

01***70	Bolt, Spacer	8
01***35	Bolt,(For Pedal Steering)	12
01***40	Bolt,(Not Used With Cab)	12
01***85	Screw	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Front Axle (Final Drive)

01***35	Bolt - Torque Converter Totransmission Mounting	58
01***45	Bolt	16
04***20	Pin,Spring	6
04***18	Ring,Snap (With Emergency Steering)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Front Axle (Knuckle And Tie Rod)

01***65	Bolt (M12-1.75x65)	2
01***40	Bolt	32
01***50	Bolt - Differential Carrier	24
01***55	Capscrew	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Parking Brake

IJ***50	Cover	2
IJ***90	Shaft,Cam	1
IJ***70	Spring	2
IJ***20	Washer,Spring	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Parking Brake Linkage

01***30	Bolt,(For Mechanical Governor)	1
01***20	Bolt,(Without Rops Guard? Canopy)	2
01***30	Bolt,(Not Used With Emergency Str.)	4
01***35	Bolt,R.H. Outside And L.H. Inside	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Rear Axle (Axle Housing)

04***34	Pin-Dowel, Pin,Dowel (For Shipping)	1
04***60	Screw, Serial Number Plate	4
07***34	O-Ring, O-Ring,Drain Plug? R.H. Half Tank	2
07***30	Breather	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Rear Axle (Axle Shaft)

01***40	Bolt	32
07***00	O-Ring,(F4350-65a1 -5 )	2
07***35	O-Ring,Cage? Transfer Gear	2
20***30	Retainer	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Rear Axle (Caliper)(#1001-1424)

20***03	Brake Ass'Y,Front Axle L.H.? Front	1
20***05	Brake Ass'Y,R.H.?Front?L.H.?Rear	1
20***06	Brake Ass'Y,R.H.?Front?L.H.?Rear	1
20***07	Brake Ass'Y,L.H. Front? R.H. Rear (Front)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Rear Axle (Caliper)(#1425-)

01***06	Nut, (Service Parts)	2
20***07	Brake Ass'Y,L.H. Front? R.H. Rear (Front)	1
20***12	Caliper Ass'Y,L.H. Front? R.H. Rear (Front)	1
20***30	Breather,Bleed	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Rear Axle (Differential)

01***70	Bolt, Spacer	8
01***35	Bolt,(For Pedal Steering)	12
01***40	Bolt,(Not Used With Cab)	12
01***85	Screw	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Rear Axle (Final Drive)

01***35	Bolt - Torque Converter Totransmission Mounting	58
01***45	Bolt	16
04***20	Pin,Spring	6
04***18	Ring,Snap (With Emergency Steering)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Steering Circuit Relief Valve

01***08	Nut (Op)	1
07***11	O-Ring (Kit)	1
07***34	O-Ring, O-Ring,Drain Plug? R.H. Half Tank	1
70***40	Ring, Back-Up	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Steering Cylinder

01***09	Nut,(With Body Positioner)	2
01***23	Washer, Wiring Harness Mounting Bracket	2
07***75	O-Ring,Cylinder Head	1
07***80	O-Ring (Kit)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Steering Piping (1/3) (Tank To Pump To Relief Valve)

01***30	Bolt,(For Mechanical Governor)	4
01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***35	Bolt,(For Quick Shift) (Mitsubishi)	5
01***40	Bolt, Mount Master Brake Cylinder	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Steering Piping (2/3) (Swivel Joint To Cylinder)

07***34	O-Ring,(For Without Brake Assistor)	2
07***14	Hose	2
08***19	Band,(Without Air Conditioner)	2
20***11	Elbow	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Steering Piping (3/3) (Swivel Joint To Valve)(#1001-1188)

01***20	Bolt,(With Auto Emergency Steering)	2
01***30	Bolt,(For Mechanical Governor)	8
01***35	Bolt,(For Position Fixing)	8
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Steering Piping (3/3) (Swivel Joint To Valve)(#1189-)

01***20	Bolt,(With Auto Emergency Steering)	2
01***35	Bolt,(For Position Fixing)	8
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Steering Pump (Except Japan)

01***36	Wahser-Spring, Washer,Spring (Without Towing Winch)	4
01***32	Washer, (Without Emergency Steering)	4
04***20	Pin,Dowel (Welded)	4
04***15	Ring, Snap	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Steering Wheel

01***30	Bolt,(For Quick Shift) (Mitsubishi)	8
01***25	Screw	2
01***08	Nut,(For Canvas Canopy?Head Guard)	1
01***10	Nut,(Fig.F2820-01a3-12)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Axle? Wheels And Steering System : Wheel

20***11	Wheel Ass'Y,R.H. Inner	2
20***21	Wheel Ass'Y,R.H. Outer	2
20***30	Wheel Ass'Y,L.H. Inner	2
20***40	Wheel Ass'Y,R.H. Inner	2

See all parts with full part numbers in Heavy Parts AI →

Engine Related Parts And Electrical System

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Air Cleaner Connection And Step

01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***70	Bolt, Mount Bracket And Oil Inlet Tube, Bolt	2
01***20	Bolt,(Without Rops Guard? Canopy)	2
01***25	Bolt,(Without Rops Guard? Canopy)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Battery (Cold Terrain Spec.)

01***16	Bolt (With Air Heater & Conditioner)	2
01***30	Bolt,(For Mechanical Governor)	3
01***18	Bolt	1
01***06	Nut, Regular Hexagon (M8-1.25)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Battery(#1001-1117)

01***16	Bolt (With Air Heater & Conditioner)	2
01***30	Bolt,(For Mechanical Governor)	3
01***18	Bolt	1
01***06	Nut, Regular Hexagon (M8-1.25)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Battery(#1118-)

01***16	Bolt (With Air Heater & Conditioner)	2
01***30	Bolt,(For Mechanical Governor)	3
01***18	Bolt	1
01***06	Nut, Regular Hexagon (M8-1.25)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (1/2)

01***10	Bolt,(With Auto Emergency Steering)	6
01***12	Bolt,(With Cylinder Cover)	1
01***16	Bolt (With Air Heater & Conditioner)	4
01***16	Bolt, Battery To Frame Ground Wire Attaching	33

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (2/2)

01***12	Bolt, Bolt,(No Need To Quick Shift)	2
01***16	Bolt, Battery To Frame Ground Wire Attaching	5
01***10	Screw,(For Lighter)	2
01***20	Screw (Not Illustrated)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Engine Mount

01***50	Bolt,(With Service Valve R.H.)	8
01***55	Bolt, Mount Lh Bracket	8
01***25	Bolt	4
01***32	Washer,(With Auto Emergency Steering)	8

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Fuel Control Lever

01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***30	Bolt,(For Quick Shift) (Mitsubishi)	5
01***60	Bolt	1
01***25	Screw	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Fuel Piping

01***16	Bolt, Battery To Frame Ground Wire Attaching	4
01***32	Washer,(With Auto Emergency Steering)	4
07***97	Clamp,(With Pre-Fuel Filter)	2
08***19	Band,(Without Air Conditioner)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Instrument Panel

01***16	Bolt (With Air Heater & Conditioner)	1
01***08	Screw, Terminal	2
01***12	Screw,(For Side Lamp) (Not Shown)	4
01***12	Capscrew	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Power Take Off

01***30	Bolt,(For Quick Shift) (Mitsubishi)	12
01***40	Bolt,(With Service Valve R.H.)	6
01***32	Washer,(With Auto Emergency Steering)	12
01***32	Washer,(Not Used With Emergency Str.)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Radiator And Oil Cooler

01***16	Bolt (With Air Heater & Conditioner)	12
01***20	Bolt,(For Quick Shift) (Mitsubishi)	4
01***25	Bolt,(For Canvas Canopy?Head Guard)	5
01***16	Washer, 1.6 mm Thick	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Radiator Mount And Piping

01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	7
01***25	Bolt,(Without Rops Guard? Canopy)	4
01***60	Bolt, Tube To Oil Cooler	4

See all parts with full part numbers in Heavy Parts AI →

Optional Parts

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Additional Piping (1/6)

01***20	Bolt,(With Auto Emergency Steering)	4
01***30	Bolt,(For Mechanical Governor)	8
01***30	Bolt,(For Quick Shift) (Mitsubishi)	10
01***65	Bolt,(Except Japan)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Additional Piping (2/6)

01***30	Bolt,(For Mechanical Governor)	8
01***30	Bolt,(For Quick Shift) (Mitsubishi)	8
01***75	Bolt,(For Adjusting)	4
01***11	Nut,(With Under Mirror)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Additional Piping (3/6)

01***30	Bolt,(For Mechanical Governor)	8
01***30	Bolt,(For Quick Shift) (Mitsubishi)	8
01***30	Bolt,(Not Used With Emergency Str.)	4
01***60	Bolt, Tube To Oil Cooler	10

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Additional Piping (4/6)

01***30	Bolt,(For Mechanical Governor)	8
01***30	Bolt,(For Quick Shift) (Mitsubishi)	8
01***45	Bolt,(For Power Tilt Mech Angle)	8
01***25	Bolt,(Without Rops Guard? Canopy)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Additional Piping (5/6)

01***25	Bolt,Without Revolution Sensor	2
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***30	Bolt,(For Quick Shift) (Mitsubishi)	2
01***08	Nut, Regular Hexagon (M10-1.50)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Additional Piping (6/6)

01***45	Screw	8
01***20	Bolt,(For Quick Shift) (Mitsubishi)	4
01***23	Washer, Wiring Harness Mounting Bracket	8
01***32	Washer,(With Auto Emergency Steering)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Car Heater And Defroster

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***20	Bolt,(With Auto Emergency Steering)	3
01***20	Bolt,(For Quick Shift) (Mitsubishi)	3
01***25	Bolt,(For Canvas Canopy?Head Guard)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Front Outrigger

01***20	Bolt,(For Quick Shift) (Mitsubishi)	6
01***25	Bolt,(Without Rops Guard? Canopy)	4
01***35	Bolt,R.H. Outside And L.H. Inside	8
01***50	Bolt,(For Tree Pusher)	16

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Front Outrigger Cylinder

01***45	Screw	4
01***55	Bolt,(10m)	4
01***30	Bolt,(For Quick Shift) (Mitsubishi)	2
01***35	Bolt,(For Quick Shift) (Mitsubishi)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Front Outrigger Piping (1/4)

01***25	Bolt,(For Canvas Canopy?Head Guard)	8
01***30	Bolt,(For Quick Shift) (Mitsubishi)	8
01***10	Screw,(With Air Conditioner)	4
01***12	Screw,(With Articulate Indicator)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Front Outrigger Piping (2/4)

01***12	Bolt, Bolt,(No Need To Quick Shift)	2
01***30	Bolt,(For Mechanical Governor)	16
01***35	Bolt,(For Position Fixing)	8
01***20	Bolt,(For Quick Shift) (Mitsubishi)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Front Outrigger Piping (3/4)

01***40	Bolt,(With Air Conditioner)	4
01***45	Screw	4
01***25	Washer,Spring?For Additional Rear Lam	8
07***25	O-Ring,(See Fig. H0311-01a0-30)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Front Outrigger Piping (4/4)(#1001-1283)

01***40	Bolt,(With Air Conditioner)	4
01***45	Screw	4
01***75	Bolt,(For Shipping)	6
01***20	Bolt,(For Quick Shift) (Mitsubishi)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Front Outrigger Piping (4/4)(#1284-)

01***40	Bolt,(With Air Conditioner)	4
01***45	Screw	4
01***75	Bolt,(For Shipping)	6
01***25	Bolt,(For Canvas Canopy?Head Guard)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Hydraulic Tank (For Vandalism Protection)

01***16	Bolt (With Air Heater & Conditioner)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	11
01***08	Nut,(For Canvas Canopy?Head Guard)	4
01***23	Washer, Wiring Harness Mounting Bracket	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Left And Right Independent Outriggers (1/2)

01***12	Bolt, Bolt,(No Need To Quick Shift)	4
01***35	Bolt,(For Position Fixing)	16
01***40	Bolt,(With Air Conditioner)	8
01***45	Screw	8

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Left And Right Independent Outriggers (2/2)

01***12	Screw,(With Articulate Indicator)	9
01***40	Screw	1
01***19	Washer,Spring (With Extinguisher) (D31p)	10
07***07	Tube	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Overload Warning Divice

01***50	Bolt (Kit)	4
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***40	Bolt,(With Service Valve R.H.)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Optional Parts : Single Wide Tire

20***00	Wheel Ass'Y,L.H	2
20***10	Wheel	1
20***10	Tire	1
20***10	Valve,Tire	1

See all parts with full part numbers in Heavy Parts AI →

Revolving Frame? Chassis And Cab

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Chassis(#1001-1117)

01***25	Bolt,(For Canvas Canopy?Head Guard)	13
01***20	Bolt,(Without Rops Guard? Canopy)	2
01***25	Bolt,(Without Rops Guard? Canopy)	14
01***30	Bolt,(Not Used With Emergency Str.)	16

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Chassis(#1118-)

01***25	Bolt,(For Canvas Canopy?Head Guard)	13
01***20	Bolt,(Without Rops Guard? Canopy)	2
01***25	Bolt,(Without Rops Guard? Canopy)	9
01***30	Bolt,(Not Used With Emergency Str.)	16

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Floor Plate

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Heater

01***25	Bolt,Without Revolution Sensor	2
01***20	Bolt,(For Quick Shift) (Mitsubishi)	3
01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***25	Washer,Spring?For Additional Rear Lam	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Machinery Compartment (1/3)

01***16	Bolt (With Air Heater & Conditioner)	8
01***20	Bolt,(For Quick Shift) (Mitsubishi)	21
01***25	Bolt,(For Canvas Canopy?Head Guard)	1
01***40	Bolt, Mount Master Brake Cylinder	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Machinery Compartment (1/3) (Noise Suppression For Ec)(#1468-)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	21
01***25	Bolt,(For Canvas Canopy?Head Guard)	1
01***40	Bolt, Mount Master Brake Cylinder	3
01***20	Bolt,(Without Rops Guard? Canopy)	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Machinery Compartment (2/3) (Noise Suppression For Ec)(#1468-)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	23
01***25	Bolt,(For Canvas Canopy?Head Guard)	6
01***40	Bolt, Mount Master Brake Cylinder	4
01***04	Nut,(For Air Conditioner Less)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Machinery Compartment (2/3)(#1001-1117)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	18
01***25	Bolt,(For Canvas Canopy?Head Guard)	12
01***40	Bolt, Mount Master Brake Cylinder	4
01***32	Washer	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Machinery Compartment (2/3)(#1118-)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	23
01***25	Bolt,(For Canvas Canopy?Head Guard)	11
01***40	Bolt, Mount Master Brake Cylinder	4
01***04	Nut,(For Air Conditioner Less)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Machinery Compartment (3/3)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	8
01***16	Bolt (With Air Heater & Conditioner)	4
01***20	Bolt,(For Quick Shift) (Mitsubishi)	6
01***25	Bolt,(For Canvas Canopy?Head Guard)	34

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Machinery Compartment (3/3) (Noise Suppression For Ec)(#1468-)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	8
01***16	Bolt (With Air Heater & Conditioner)	4
01***20	Bolt,(For Quick Shift) (Mitsubishi)	6
01***25	Bolt,(For Canvas Canopy?Head Guard)	34

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Operator'S Cab (1/6)

01***12	Bolt, Bolt,(No Need To Quick Shift)	8
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	8
01***16	Bolt (With Air Heater & Conditioner)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Operator'S Cab (2/6)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	4
01***12	Screw,(For Side Lamp) (Not Shown)	2
01***16	Screw, Mount Parking Lights	2
01***20	Screw	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Operator'S Cab (3/6)(#1001-1161)

01***25	Screw	4
01***20	Screw	4
01***12	Screw,(Not Shown) (For Std Cab)	24
01***19	Washer,Spring (With Extinguisher) (D31p)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Operator'S Cab (3/6)(#1162-)

01***25	Screw	4
01***20	Screw	4
01***12	Screw,(Not Shown) (For Std Cab)	24
01***19	Washer,Spring (With Extinguisher) (D31p)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Operator'S Cab (4/6)

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Operator'S Cab (5/6)

01***20	Bolt,(With Auto Emergency Steering)	2
01***10	Screw,(For Lighter)	2
01***10	Screw,(With Air Conditioner)	4
01***30	Screw,Lock	21

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Operator'S Cab (6/6)

01***10	Bolt,(With Auto Emergency Steering)	6
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***20	Bolt,(Without Maintenance Monitor)	4
01***08	Screw - Clip Mounting	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Operator'S Seat(#1001-1013)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	9
01***30	Bolt,(Not Used With Emergency Str.)	4
01***10	Nut,(Without Air Conditioner)	8
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	9

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Operator'S Seat(#1014-)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	9
01***30	Bolt,(Not Used With Emergency Str.)	4
01***10	Nut,(Without Air Conditioner)	8
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	9

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Outrigger

01***20	Bolt,(For Quick Shift) (Mitsubishi)	6
01***25	Bolt,(Without Rops Guard? Canopy)	4
01***35	Bolt,R.H. Outside And L.H. Inside	8
01***65	Bolt	16

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Revolving Frame

01***16	Bolt (With Air Heater & Conditioner)	4
01***16	Bolt, Battery To Frame Ground Wire Attaching	5
01***25	Bolt,(For Canvas Canopy?Head Guard)	9
01***20	Bolt,(Without Rops Guard? Canopy)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Seat Box (1/2)

01***12	Bolt, Bolt,(No Need To Quick Shift)	4
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***16	Bolt (With Air Heater & Conditioner)	4
01***20	Bolt,(With Auto Emergency Steering)	7

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Revolving Frame? Chassis And Cab : Seat Box (2/2)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***10	Screw,(With Air Conditioner)	5
01***12	Capscrew	1

See all parts with full part numbers in Heavy Parts AI →

Special Application Parts? Mark Plate? Tool And Kit

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Air Cleaner Connection And Step (Tbg? Abe Spec.)

01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***70	Bolt, Mount Bracket And Oil Inlet Tube, Bolt	2
01***20	Bolt,(Without Rops Guard? Canopy)	2
01***25	Bolt,(Without Rops Guard? Canopy)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Air Master (Tbg? Abe Spec.)

20***50	Master,Air	1
NA***03	O-Ring	1
NA***10	O-Ring	1
NA***40	Ring,Back-Up	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Battery (Tbg? Abe Spec.)

01***20	Bolt,(With Auto Emergency Steering)	2
01***30	Bolt,(For Mechanical Governor)	3
01***18	Bolt	1
01***06	Nut, Regular Hexagon (M8-1.25)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Bucket Link (Tbg? Abe Spec.)

01***60	Bolt	2
01***40	Bolt	2
01***13	Nut,(For Adjustable Rod)	8
07***00	Fitting, Grease - Upper Hinge Pin	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Chassis (Regulation Of Sweden)(#1001-.)

01***25	Bolt,(For Canvas Canopy?Head Guard)	13
01***20	Bolt,(Without Rops Guard? Canopy)	2
01***25	Bolt,(Without Rops Guard? Canopy)	12
01***30	Bolt,(Not Used With Emergency Str.)	16

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Chassis (Tbg? Abe Spec.)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	8
01***25	Bolt,(For Canvas Canopy?Head Guard)	19
01***25	Bolt,(Without Rops Guard? Canopy)	12
01***30	Bolt,(Not Used With Emergency Str.)	16

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Drain Piping (1/2) (Regulation Of Sweden)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	1
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	1
07***34	O-Ring,(For Without Brake Assistor)	4
07***08	Plug,(For W/O. Corrosion Resistor)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Drain Piping (2/2) (Regulation Of Sweden)

01***35	Bolt,(For Position Fixing)	4
01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***45	Bolt,(For Power Tilt Mech Angle)	2
01***25	Washer,Spring?For Additional Rear Lam	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (1/2) (Regulation Of Sweden)

01***10	Bolt,(With Auto Emergency Steering)	6
01***12	Bolt,(With Cylinder Cover)	1
01***16	Bolt (With Air Heater & Conditioner)	4
01***16	Bolt, Battery To Frame Ground Wire Attaching	33

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (1/3) (Tbg? Abe Spec.)

01***10	Bolt,(With Auto Emergency Steering)	6
01***16	Bolt (With Air Heater & Conditioner)	2
01***16	Bolt, Battery To Frame Ground Wire Attaching	32
01***25	Bolt,(For Canvas Canopy?Head Guard)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (2/2) (Regulation Of Sweden)

01***12	Bolt, Bolt,(No Need To Quick Shift)	2
01***16	Bolt, Battery To Frame Ground Wire Attaching	5
01***10	Screw,(For Lighter)	2
01***20	Screw (Not Illustrated)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (2/3) (Tbg? Abe Spec.)

01***10	Bolt,(With Auto Emergency Steering)	6
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	6
01***16	Bolt, Battery To Frame Ground Wire Attaching	2
01***20	Screw,(For 50a Alternator)	7

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (3/3) (Tbg? Abe Spec.)

01***12	Bolt, Bolt,(No Need To Quick Shift)	2
01***16	Bolt, Battery To Frame Ground Wire Attaching	5
01***10	Screw,(For Lighter)	2
01***20	Screw (Not Illustrated)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Floor Plate (Tbg? Abe Spec.)

01***85	Bolt,(For Perforated Mask)	6
01***45	Washer,(For Travel Motor) (Not Show)	6
07***28	O-Ring, Strainer To Control Pump Line	6
08***14	Grommet,(For Eu Dynamic Noise)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Fuel Control Lever (Regulation Of Sweden)

01***25	Bolt,(For Canvas Canopy?Head Guard)	6
01***30	Bolt,(For Quick Shift) (Mitsubishi)	5
01***60	Bolt	1
01***25	Screw	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Heater (Tbg? Abe Spec.)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***20	Bolt,(With Auto Emergency Steering)	3
01***20	Bolt,(For Quick Shift) (Mitsubishi)	3
01***25	Bolt,(For Canvas Canopy?Head Guard)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hoe Fixed System (Tbg? Abe Spec.)

01***30	Bolt,(For Quick Shift) (Mitsubishi)	4
01***32	Washer,(With Auto Emergency Steering)	4
20***60	Lever	1
20***70	Lever	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Equipment Related Parts (Vehicle Inspection Parts) (For Japan And Regulation Of Sweden)

01***16	Bolt (With Air Heater & Conditioner)	2
01***20	Bolt,(With Auto Emergency Steering)	6
01***25	Bolt,Without Revolution Sensor	2
01***50	Bolt (Kit)	5

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Piping (1/3) (Tank To Pump To Valve) (Tbg? Abe Spec.)

01***80	Bolt,(For Long Lever Control)	8
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4
01***35	Bolt,(For Quick Shift) (Mitsubishi)	8
01***30	Bolt,(Not Used With Emergency Str.)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Piping (2/3) (Valve To Oil Cooler) (Tbg? Abe Spec.)(#1001-1188)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	6
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4
01***35	Bolt,(For Quick Shift) (Mitsubishi)	2
01***11	Nut,(With Under Mirror)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Piping (2/3) (Valve To Oil Cooler) (Tbg? Abe Spec.)(#1189-)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	6
01***30	Bolt,(For Quick Shift) (Mitsubishi)	2
01***35	Bolt,(For Quick Shift) (Mitsubishi)	2
01***11	Nut,(With Under Mirror)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Piping (3/3) (Pump To Filter To Swivel Joint) (Tbg? Abe Spec.)

01***14	Nut (Itl)	1
07***34	O-Ring,(Not Used When (B) Spec.)	3
07***34	O-Ring, O-Ring,Drain Plug? R.H. Half Tank	3
07***05	Hose,(For Maintenance Monitor)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Piping (Vavle To Boom Cylinder) (Tbg? Abe Spec.)

01***30	Bolt,(For Mechanical Governor)	1
01***35	Bolt,(For Position Fixing)	8
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***30	Bolt,(For Quick Shift) (Mitsubishi)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Instrument Panel (Tbg? Abe Spec.)

01***16	Bolt (With Air Heater & Conditioner)	1
01***08	Screw, Terminal	2
01***12	Screw,(For Side Lamp) (Not Shown)	4
01***12	Capscrew	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Kit

07***75	O-Ring,Cylinder Head	1
07***80	O-Ring (Kit)	1
07***05	O-Ring, Steering Pump Mounting	4
07***25	O-Ring,Cylinder Head	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Lower Air Piping (1/3) (Air Master) (Tbg? Abe Spec.)

01***12	Bolt, Bolt,(No Need To Quick Shift)	2
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	4
01***20	Bolt,(With Auto Emergency Steering)	2
01***16	Bolt, Battery To Frame Ground Wire Attaching	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Lower Air Piping (2/3) (Lock Valve) (Tbg? Abe Spec.)

01***12	Bolt, Bolt,(No Need To Quick Shift)	2
01***12	Bolt,(With Cylinder Cover)	1
01***20	Bolt,(With Auto Emergency Steering)	2
01***25	Washer,Spring?(Sandy And Dusty Spec.)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Lower Air Piping (3/3) (Front Brake) (Tbg? Abe Spec.)

01***20	Bolt,(With Auto Emergency Steering)	1
01***20	Bolt,(For Quick Shift) (Mitsubishi)	6
01***08	Nut (Op)	2
01***25	Washer,Spring?For Additional Rear Lam	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (1/3) (Regulation Of Sweden)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	21
01***25	Bolt,(For Canvas Canopy?Head Guard)	1
01***40	Bolt, Mount Master Brake Cylinder	3
01***25	Bolt,(Without Rops Guard? Canopy)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (1/3) (Tbg? Abe Spec.)

01***16	Bolt (With Air Heater & Conditioner)	4
01***20	Bolt,(For Quick Shift) (Mitsubishi)	21
01***25	Bolt,(For Canvas Canopy?Head Guard)	1
01***40	Bolt, Mount Master Brake Cylinder	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (2/3) (Regulation Of Sweden)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	28
01***25	Bolt,(For Canvas Canopy?Head Guard)	14
01***10	Nut,(Without Air Conditioner)	2
01***16	Washer,(With Water Separator)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (2/3) (Tbg? Abe Spec.)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	20
01***25	Bolt,(For Canvas Canopy?Head Guard)	12
01***25	Bolt,(Without Rops Guard? Canopy)	4
01***55	Bolt,(Tree Pusher Dozer)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (3/3) (Regulation Of Sweden)

01***25	Bolt,(For Canvas Canopy?Head Guard)	38
01***45	Bolt,(For Power Tilt Mech Angle)	2
01***25	Bolt,See Fig. K4010-65a0	2
01***32	Washer,(With Auto Emergency Steering)	40

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (3/3) (Tbg? Abe Spec.)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	8
01***25	Bolt,(For Canvas Canopy?Head Guard)	38
01***45	Bolt,(For Power Tilt Mech Angle)	2
01***23	Washer, Wiring Harness Mounting Bracket	8

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Arabic) (Except Japan)

01***08	Screw	4
01***10	Washer,Spring (For Engine Room Lamp)	4
09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Caution,Kiip Out Of Turning Area	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Chinese) (Except Japan)(#1001-1695)

01***08	Screw	4
01***10	Washer,Spring (For Engine Room Lamp)	4
09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Safety,Keep Out Of Turning Area	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Chinese) (Except Japan)(#1696-)

09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Safety,Keep Out Of Turning Area	1
09***00	Plate? Safety,Air Reservoir Drain	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (English) (Except Japan) (Noise Suppression For Ec)(#1468-1695)

09***00	Plate? Safety,Lock Lever (With Lock Pin)	1
09***00	Plate? Safety,Off Limit Within Swing Area	1
09***00	Product Graphic, Caution, Drain Air Tanks	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (English) (Except Japan) (Noise Suppression For Ec)(#1696-)

09***00	Plate? Safety,Lock Lever (With Lock Pin)	1
09***00	Plate? Safety,Off Limit Within Swing Area	1
09***00	Product Graphic, Caution, Drain Air Tanks	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (English) (Except Japan)(#1001-1695)

01***08	Screw	4
01***10	Washer,Spring (For Engine Room Lamp)	4
09***00	Plate? Safety,Lock Lever (With Lock Pin)	1
09***00	Plate? Safety,Off Limit Within Swing Area	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (English) (Except Japan)(#1696-)

09***00	Plate? Safety,Lock Lever (With Lock Pin)	1
09***00	Plate? Safety,Off Limit Within Swing Area	1
09***00	Product Graphic, Caution, Drain Air Tanks	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (French) (Except Japan)(#1001-1695)

01***08	Screw	4
01***10	Washer,Spring (For Engine Room Lamp)	4
09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Caution,Keep Out Of Turning Area	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (French) (Except Japan)(#1696-)

09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Caution,Keep Out Of Turning Area	1
09***00	Plate, Safety, Air Reservoir Drain	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (German) (1/2) (For Abe Spec.)

01***08	Screw	4
01***10	Washer,Spring (For Engine Room Lamp)	4
09***00	Plate? Safety,Air Reservoir Drain	1
09***00	Plate? Safety,Hydraulic Tank Cap	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (German) (2/2) (For Abe Spec.)

09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Safety,Inspection And Maintenance	1
09***61	Plate? Instruction,Air Cleaner	1
09***03	Plate? Instruction,Radiator Water Level	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Italian) (Except Japan)(#1001-1695)

09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Safety,Keep Out Of Turning Area	1
09***00	Plate? Safety,Air Reservoir Drain	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Italian) (Except Japan)(#1696-)

09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Safety,Keep Out Of Turning Area	1
09***00	Plate? Safety,Air Reservoir Drain	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Persian) (Except Japan)

09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Safety,Keep Out Of Turning Area	1
09***00	Plate? Safety,Safety? Reservoir Drain	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Russian) (Except Japan)(#1001-1695)

09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Caution,Keep Out Of Turning Area	1
09***00	Plate? Safety,Safety? Reservoir Drain	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Russian) (Except Japan)(#1696-)

09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Caution,Keep Out Of Turning Area	1
09***00	Plate? Safety,Safety? Reservoir Drain	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Spanish) (Except Japan)(#1001-1695)

01***08	Screw	4
01***10	Washer,Spring (For Engine Room Lamp)	4
09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Caution,Keep Out Of Turning Area	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Spanish) (Except Japan)(#1696-)

09***00	Plate? Safety,Swing Lock Lever	1
09***00	Plate? Caution,Keep Out Of Turning Area	1
09***00	Product Graphic, Caution, Drain Air Tanks	1
09***00	Plate? Safety,Inspection And Maintenance	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (1/6) (Regulation Of Sweden)

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (1/6) (Tbg? Abe Spec.)

01***12	Bolt, Bolt,(No Need To Quick Shift)	8
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	6
01***16	Bolt (With Air Heater & Conditioner)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (2/6) (Regulation Of Sweden)

01***16	Bolt (With Air Heater & Conditioner)	8
01***12	Screw,(For Side Lamp) (Not Shown)	2
01***16	Screw, Mount Parking Lights	2
01***20	Screw	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (2/6) (Tbg? Abe Spec.)

01***12	Screw,(For Side Lamp) (Not Shown)	2
01***16	Screw, Mount Parking Lights	2
01***10	Washer,Spring (For Engine Room Lamp)	2
01***13	Washer,Spring(For Wiper Switch Earth)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (3/6) (Regulation Of Sweden)

01***25	Screw	4
01***20	Screw	4
01***12	Screw,(Not Shown) (For Std Cab)	24
01***19	Washer,Spring (With Extinguisher) (D31p)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (3/6) (Tbg? Abe Spec.)

01***25	Screw	4
01***20	Screw	4
01***12	Screw,(Not Shown) (For Std Cab)	24
01***16	Screw,(Not Shown)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (4/6) (Regulation Of Sweden)

01***12	Screw,(For Side Lamp) (Not Shown)	2
01***16	Screw	4
01***10	Washer,Spring (For Engine Room Lamp)	2
01***05	Washer,(Without Window Washer)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (4/6) (Tbg? Abe Spec.)

01***16	Bolt (With Air Heater & Conditioner)	4
01***20	Bolt,(With Auto Emergency Steering)	2
01***12	Screw,(For Side Lamp) (Not Shown)	2
01***10	Washer,Spring (For Engine Room Lamp)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (5/6) (Regulation Of Sweden)

01***20	Bolt,(With Auto Emergency Steering)	2
01***10	Screw,(For Lighter)	2
01***10	Screw,(With Air Conditioner)	4
01***30	Screw,Lock	21

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (5/6) (Tbg? Abe Spec.)

01***20	Bolt,(With Auto Emergency Steering)	2
01***10	Screw,(For Lighter)	2
01***10	Screw,(With Air Conditioner)	2
01***30	Screw,Lock	21

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (6/6) (Regulation Of Sweden)

01***10	Bolt,(With Auto Emergency Steering)	6
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***20	Bolt,(Without Maintenance Monitor)	4
01***08	Screw - Clip Mounting	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (6/6) (Tbg? Abe Spec.)

01***10	Bolt,(With Auto Emergency Steering)	6
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***20	Bolt,(Without Maintenance Monitor)	4
01***08	Screw - Clip Mounting	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Seat (Tbg? Abe Spec.)

01***30	Bolt,(Not Used With Emergency Str.)	4
01***10	Nut,(Without Air Conditioner)	4
01***32	Washer,(Not Used With Emergency Str.)	8
20***11	Plate	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Overload Warning Device (Tbg? Abe Spec.)

01***50	Bolt (Kit)	4
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***30	Bolt,(For Quick Shift) (Mitsubishi)	2
01***40	Bolt,(With Service Valve R.H.)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Parking Brake (Tbg? Abe Spec.)

01***11	Nut - Mounting	6
01***45	Washer,(For Quick Shift) (Mitsubishi)	6
20***90	Bolt	6
20***40	Parking Brake Ass'Y	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Parking Brake Linkage (Tbg? Abe Spec.)

01***20	Bolt,(With Auto Emergency Steering)	3
01***30	Bolt,(For Mechanical Governor)	1
01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***30	Bolt,(Not Used With Emergency Str.)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Revolving Frame (Regulation Of Sweden)

01***16	Bolt (With Air Heater & Conditioner)	4
01***25	Bolt,(For Canvas Canopy?Head Guard)	9
01***20	Bolt,(Without Rops Guard? Canopy)	2
01***30	Bolt,(Not Used With Emergency Str.)	5

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Revolving Frame (Tbg? Abe Spec.)

01***16	Bolt (With Air Heater & Conditioner)	4
01***25	Bolt,(For Canvas Canopy?Head Guard)	9
01***20	Bolt,(Without Rops Guard? Canopy)	2
01***30	Bolt,(Not Used With Emergency Str.)	5

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Seat Box (1/2) (Regulatin Of Sweden)

01***12	Bolt, Bolt,(No Need To Quick Shift)	6
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***16	Bolt (With Air Heater & Conditioner)	4
01***20	Bolt,(With Auto Emergency Steering)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Seat Box (1/2) (Tbg? Abe Spec.)

01***12	Bolt, Bolt,(No Need To Quick Shift)	8
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***16	Bolt (With Air Heater & Conditioner)	4
01***20	Bolt,(With Auto Emergency Steering)	9

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Seat Box (2/2) (Regulation Of Sweden)

01***10	Bolt,(With Auto Emergency Steering)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***10	Screw,(With Air Conditioner)	6
01***12	Capscrew	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Seat Box (2/2) (Tbg? Abe Spec.)

01***10	Bolt,(With Auto Emergency Steering)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	1
01***10	Screw,(With Air Conditioner)	4
01***12	Capscrew	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Spare Parts (Except Japan)

04***53	V-Belt Set,(Tropical Sandy? Dusty Spec.)	1
07***55	O-Ring,Hydraulic Oil Filter	1
07***00	Fitting, Grease - Upper Hinge Pin	4
07***75	Fitting,Grease (Without Lub. Piping)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Spare Parts (For Turkey)

07***50	Pump, (Bellows Type)	1
07***03	Cartridge - Grease	1
07***45	Nozzle, Grease Pump (Non-Flexible Type)	1
07***02	Pump Assembly - Grease	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Spare Parts (For Turkey) (Tropical Terrain Specifications)

04***52	V-Belt Set,(Tropical Sandy? Dusty Spec.)	1
07***55	O-Ring,Hydraulic Oil Filter	1
07***00	Fitting, Grease - Upper Hinge Pin	4
07***75	Fitting,Grease (Without Lub. Piping)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Steering Piping (1/3) (Tank To Pump To Relief Valve) (Tbg? Abe Spec.)

01***30	Bolt,(For Mechanical Governor)	4
01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***35	Bolt,(For Quick Shift) (Mitsubishi)	5
01***40	Bolt, Mount Master Brake Cylinder	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Steering Piping (2/3) (Swivel Joint To Cylinder) (Tbg? Abe Spec.)

07***34	O-Ring,(For Without Brake Assistor)	2
07***14	Hose	2
08***19	Band,(Without Air Conditioner)	2
20***11	Elbow	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Steering Piping (3/3) (Swivel Joint To Control Valve) (Tbg? Abe Spec.)(#1001-1188)

01***20	Bolt,(With Auto Emergency Steering)	2
01***30	Bolt,(For Mechanical Governor)	8
01***35	Bolt,(For Position Fixing)	8
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Steering Piping (3/3) (Swivel Joint To Control Valve) (Tbg? Abe Spec.)(#1189-)

01***20	Bolt,(With Auto Emergency Steering)	2
01***35	Bolt,(For Position Fixing)	8
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Suspention Piping (Regulation Of Sweden)

01***40	Bolt,(With Air Conditioner)	4
01***45	Screw	4
01***25	Washer,Spring?For Additional Rear Lam	8
07***25	O-Ring,(See Fig. H0311-01a0-30)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Tool (Except Japan)(#1001-1305)

07***50	Pump, (Bellows Type)	1
07***03	Cartridge - Grease	1
07***45	Nozzle, Grease Pump (Non-Flexible Type)	1
07***02	Pump Assembly - Grease	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Tool (Except Japan)(#1306-)

07***50	Pump, (Bellows Type)	1
07***03	Cartridge - Grease	1
07***45	Nozzle, Grease Pump (Non-Flexible Type)	1
07***02	Pump Assembly - Grease	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Transmission (1/3) (Tbg? Abe Spec.)

01***25	Bolt,(For Canvas Canopy?Head Guard)	16
01***30	Bolt,(For Quick Shift) (Mitsubishi)	21
01***35	Bolt,(For Quick Shift) (Mitsubishi)	5
01***80	Bolt,(For 100kg)	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Transmission (2/3) (Tbg? Abe Spec.)

01***80	Screw	1
01***00	Bolt	2
01***45	Washer,(For Quick Shift) (Mitsubishi)	3
06***11	Bearing,Ball	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Transmission (3/3) (Tbg? Abe Spec.)

01***30	Bolt,(For Quick Shift) (Mitsubishi)	3
01***14	Nut	1
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	3
01***32	Washer,(Not Used With Emergency Str.)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (1/6) (Compressor To Reservoir) (Regulation Of Sweden)

01***25	Bolt,Without Revolution Sensor	2
01***20	Bolt,(For Quick Shift) (Mitsubishi)	11
01***25	Bolt,(For Canvas Canopy?Head Guard)	6
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (1/8) (Compressor To Reservoir) (Tbg? Abe Spec.)

01***16	Bolt, Battery To Frame Ground Wire Attaching	1
01***20	Bolt,(For Quick Shift) (Mitsubishi)	1
01***09	Nut,(With Body Positioner)	2
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (2/6) (Reservoir To Block? Brake) (Regulation Of Sweden)

01***16	Bolt, Battery To Frame Ground Wire Attaching	1
01***19	Nut	2
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	1
01***60	Washer,(Without Rops Guard? Canopy)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (2/8) (Purge Chamber? Air Dryer) (Tbg? Abe Spec.)

01***25	Bolt,Without Revolution Sensor	2
01***30	Bolt,(For Mechanical Governor)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	12
01***40	Bolt,(With Service Valve R.H.)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (3/6) (Reservoir Hydraulic Tank) (Regulation Of Sweden)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	6
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	6
01***23	Washer,(With Auto Emergency Steering)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (3/8) (Reservoir To Block) (Tbg? Abe Spec.)

01***16	Bolt (With Air Heater & Conditioner)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4
01***35	Bolt, Bolt, Mount Tubes To Switch And Work Pumps	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (4/6) (Parking Brake To Block) (Regulation Of Sweden)

01***25	Bolt,(For Canvas Canopy?Head Guard)	1
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	1
07***11	Plug,(For Shipping)	2
07***00	Elbow	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (4/8) (Protection? Brake Valve) (Tbg? Abe Spec.)

01***50	Bolt	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***19	Nut	2
01***19	Washer,Spring (With Extinguisher) (D31p)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (5/6) (Brake Lock Valve To Block) (Regulation Of Sweden)

01***40	Bolt, Mount Master Brake Cylinder	3
01***16	Washer,(With Water Separator)	3
07***11	Plug (Shipping Only)	1
07***12	Plug,(For Ec)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (5/8) (Hydraulic Tank) (Tbg? Abe Spec.)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***20	Bolt,(For Quick Shift) (Mitsubishi)	5
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	5
01***23	Washer,(With Auto Emergency Steering)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (6/6) (Valve To Swivel Joint) (Regulation Of Sweden)

01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***50	Screw	4
01***03	Nut (Welded)	4
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (6/8) (Parking Brake Valve) (Tbg? Abe Spec.)

01***65	Bolt,R.H	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	1
01***25	Washer,Spring?For Additional Rear Lam	2
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (7/8) (Brake Valve To Block) (Tbg? Abe Spec.)

01***40	Bolt, Mount Master Brake Cylinder	3
01***16	Washer,(With Water Separator)	3
07***11	Plug,Without Automatic Air Bleeding	1
07***12	Plug,(For Ec)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Upper Air Piping (8/8) (Valve To Swing Joint) (Tbg? Abe Spec.)

01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***40	Screw	4
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	2
01***08	Washer,(For Fixed Type Ripper)	4

See all parts with full part numbers in Heavy Parts AI →

Swing And Control System

Komatsu : Pw150-1(S/N 1001-Up) : Swing And Control System : Swing Circle

04***42	Pin,Dowel? Gear Case Cover	2
07***00	Fitting, Grease - Upper Hinge Pin	4
20***10	Circle,Swing	1
21***30	Bolt	50

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Swing And Control System : Swing Machinery

Komatsu : Pw150-1(S/N 1001-Up) : Swing And Control System : Swing Motor (1/2)

04***30	Seal, Dust	1
70***00	Swing Motor Ass'Y	1
70***01	Swing Motor Ass'Y	1
70***02	Swing Motor Ass'Y	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Swing And Control System : Swing Motor (2/2)

07***20	O-Ring	1
07***20	Ring, Back-Up	2
07***34	O-Ring,(For 2-Actuater Attachment)	3
07***34	O-Ring,(F2310-59a0 -4 )	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Swing And Control System : Swing Motor Piping

01***25	Bolt,Without Revolution Sensor	2
01***35	Bolt,(For Position Fixing)	12
01***40	Bolt,(With Air Conditioner)	4
01***45	Screw	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Swing And Control System : Valve Control Lever

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	12
01***25	Bolt,Without Revolution Sensor	2
01***05	Nut	4
01***19	Washer,Spring (With Extinguisher) (D31p)	8

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Swing And Control System : Valve Control Linkage

01***25	Bolt,(For Canvas Canopy?Head Guard)	5
01***25	Bolt,(Without Rops Guard? Canopy)	4
01***05	Nut,(For Air Conditioner Less), Nut	1
01***10	Nut,(Without Air Conditioner)	1

See all parts with full part numbers in Heavy Parts AI →

Travel And Transmission

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Drain Piping (1/2)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	1
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	1
07***34	O-Ring,(For Without Brake Assistor)	3
07***08	Plug,(For W/O. Corrosion Resistor)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Drain Piping (2/2)

01***35	Bolt,(For Position Fixing)	4
01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***45	Bolt,(For Power Tilt Mech Angle)	2
01***25	Washer,Spring?For Additional Rear Lam	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Hydraulic Piping (1/3) (Tank To Pump To Valve)

01***80	Bolt,(For Long Lever Control)	8
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4
01***35	Bolt,(For Quick Shift) (Mitsubishi)	8
01***30	Bolt,(Not Used With Emergency Str.)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Hydraulic Piping (2/3) (Valve To Oil Coller)(#1189-)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	6
01***30	Bolt,(For Quick Shift) (Mitsubishi)	2
01***35	Bolt,(For Quick Shift) (Mitsubishi)	2
01***11	Nut,(With Under Mirror)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Hydraulic Piping (2/3) (Valve To Oil Cooler)(#1001-1188)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	6
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4
01***35	Bolt,(For Quick Shift) (Mitsubishi)	2
01***11	Nut,(With Under Mirror)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Hydraulic Piping (3/3) (Pump To Filter To Swivel Joint)

01***14	Nut (Itl)	1
07***34	O-Ring,(Not Used When (B) Spec.)	3
07***34	O-Ring, O-Ring,Drain Plug? R.H. Half Tank	3
07***05	Hose,(For Maintenance Monitor)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Suspension Lock Cylinder

07***09	Seal,Dust (Kit)	1
07***08	Plug,(For W/O. Corrosion Resistor)	1
07***35	Bushing	1
07***35	Ring,Snap	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Suspension Lock Valve

20***10	Valve Ass'Y,Suspension Lock(Except Japan)	1
NA***25	Bolt	4
NA***55	Bolt	4
NA***03	Plug	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Suspension Piping

01***40	Bolt,(With Air Conditioner)	4
01***45	Screw	4
01***25	Washer,Spring?For Additional Rear Lam	8
07***25	O-Ring,(See Fig. H0311-01a0-30)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Swivel Joint

01***25	Bolt,(Sandy? Dusty Terrain Spec.)	8
01***20	Bolt,(With Auto Emergency Steering)	3
04***08	Pin, Spring	1
04***25	Ring, Snap	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Transmission (1/3)

01***25	Bolt,(For Canvas Canopy?Head Guard)	16
01***30	Bolt,(For Quick Shift) (Mitsubishi)	21
01***35	Bolt,(For Quick Shift) (Mitsubishi)	5
01***80	Bolt,(For 100kg)	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Transmission (2/3)

01***80	Screw	1
01***00	Bolt	2
01***45	Washer,(For Quick Shift) (Mitsubishi)	3
06***11	Bearing,Ball	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Transmission (3/3)

01***30	Bolt,(For Quick Shift) (Mitsubishi)	3
01***14	Nut	1
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	3
01***32	Washer,(Not Used With Emergency Str.)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Travel Motor (1/2)

07***34	O-Ring,(Not Used When (B) Spec.)	1
07***12	Plug,(For Without Brake Assistor)	1
70***01	Travel Motor Ass'Y,(Kmv105dt)	1
70***01	Motor Ass'Y	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Travel Motor (2/2)

01***25	Bolt - Valve To Bracket Mounting	8
01***05	Nut,(For Air Conditioner Less), Nut	1
01***10	Nut,(Without Air Conditioner)	2
01***36	Wahser-Spring, Washer,Spring (Without Towing Winch)	24

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Travel Motor Brake Valve

07***22	O-Ring,Lubricating Oil Pipe	1
07***22	Ring, Back-Up	2
07***23	O-Ring,(F4320-61a0 -29 )	4
07***34	O-Ring, O-Ring, Oil Level And Fill Plug	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Travel And Transmission : Travel Motor Piping (Swivel Joint To Motor)

01***30	Bolt,(For Mechanical Governor)	16
01***80	Bolt,(For Long Lever Control)	3
01***20	Bolt,(For Quick Shift) (Mitsubishi)	4
01***25	Bolt,(For Canvas Canopy?Head Guard)	2

See all parts with full part numbers in Heavy Parts AI →

Work Equipment

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : 1-Piece Boom

01***35	Bolt, Hydraulic Tank Mounting	5
01***40	Bolt	2
01***13	Nut,(For Adjustable Rod)	4
01***45	Washer,(For Travel Motor) (Not Show)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Arm

01***35	Bolt, Hydraulic Tank Mounting	2
01***45	Washer,(For Travel Motor) (Not Show)	2
07***00	Fitting, Grease (Steering Cylinder)	2
07***80	Seal,Dust (Kit)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Blade

01***25	Bolt,(Without Rops Guard? Canopy)	8
01***30	Bolt,(Not Used With Emergency Str.)	4
01***35	Bolt, Bolt, Mount Tubes To Switch And Work Pumps	8
01***35	Bolt, Hydraulic Tank Mounting	8

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Blade Cylinder

01***45	Screw	8
01***55	Bolt,(10m)	8
01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***35	Bolt,(For Quick Shift) (Mitsubishi)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Blade Cylinder (For Turkey)(#1310-)

01***45	Screw	8
01***55	Bolt,(10m)	8
01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***35	Bolt,(For Quick Shift) (Mitsubishi)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Boom

01***12	Bolt,(With Cylinder Cover)	2
01***40	Bolt,R.H. Outside And L.H. Inside, Bolt	4
01***35	Bolt, Hydraulic Tank Mounting	7
01***23	Washer, Wiring Harness Mounting Bracket	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Bucket

01***69	Bolt	8
01***28	Nut (Std)	8
20***61	Adapter (Welded)	5
20***72	Tooth	5

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Bucket Hook

20***10	Bucket	1
20***20	Hook (Welded)	1
20***30	Plate (Welded)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Bucket Link

01***60	Bolt	2
01***40	Bolt	2
01***13	Nut,(For Adjustable Rod)	8
07***00	Fitting, Grease - Upper Hinge Pin	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Clamshll Arm And Piping (1850mm Std Arm)

01***30	Bolt,(For Mechanical Governor)	4
01***50	Bolt,(For Strengthened Cover)	4
01***32	Washer,(Not Used With Emergency Str.)	4
01***23	Washer,(For Shipping)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Clamshll Arm And Piping (1850mm Std Arm) (Use Both As Bucket And Clamshell Bucket)

01***30	Bolt,(For Mechanical Governor)	32
01***50	Bolt,(For Strengthened Cover)	4
01***65	Bolt, Mount Radiator To Frame (Bottom)	4
01***25	Washer,Spring?For Additional Rear Lam	40

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Clamshll Arm And Piping (2250mm Semi-Long Arm)

01***30	Bolt,(For Mechanical Governor)	4
01***50	Bolt,(For Strengthened Cover)	4
01***32	Washer,(Not Used With Emergency Str.)	4
01***23	Washer,(For Shipping)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Clamshll Bucket 0.40m3

01***25	Bolt,(Without Rops Guard? Canopy)	4
01***30	Bolt-Hex, Bolt,(With Center Guard)	4
01***20	Bolt	8
01***90	Screw	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Clamshll Cylinder

07***20	O-Ring,Cover? Transfer Case	1
07***15	O-Ring,(Y1621-01a0-10)	1
07***06	Bushing	2
07***60	Seal,(Y1620-41a0a-14)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Clamshll Piping

01***30	Bolt,(For Mechanical Governor)	24
01***25	Washer,Spring?For Additional Rear Lam	8
01***23	Washer,(For Shipping)	16
07***25	O-Ring,(See Fig. H0311-01a0-30)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Ditch Cleaning Bucket 0.55m3 Width 2000mm

07***75	Fitting,Grease (Without Lub. Piping)	3
21***30	Link Ass'Y	1
21***70	Bushing	2
21***80	Seal,Dust (Kit)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Hydraulic Piping (For 1-Piece Boom)

01***30	Bolt,(For Mechanical Governor)	56
01***30	Bolt,(Not Used With Emergency Str.)	4
01***50	Bolt,(For Strengthened Cover)	8
01***11	Nut,(With Under Mirror)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Hydraulic Piping (For Blade)

01***95	Bolt,L.H	3
01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***11	Nut,(With Under Mirror)	8
01***25	Washer,Spring?For Additional Rear Lam	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Light Work Bucket 0.65m3 Width 1100mm

01***69	Bolt	8
01***28	Nut (Std)	8
20***61	Adapter (Welded)	5
20***71	Tooth	5

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Light Work Bucket 0.90m3 Width 1450mm

20***61	Adapter (Welded)	7
20***72	Tooth	7
20***80	Pin	7
20***90	Lock	7

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Light Work Bucket 1.00m3 Width 1600mm

20***61	Adapter (Welded)	6
20***72	Tooth	6
20***80	Pin	6
20***90	Lock	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Long Arm (For 1-Piece Boom)

01***30	Bolt,(For Mechanical Governor)	16
01***45	Bolt, Mounting Bracket To Radiator (Top)	4
01***25	Washer,Spring?For Additional Rear Lam	16
01***36	Wahser-Spring, Washer,Spring (Without Towing Winch)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Lubrication Piping (For 1-Piece Boom)

01***12	Bolt, Bolt,(No Need To Quick Shift)	10
01***19	Washer,Spring (With Extinguisher) (D31p)	10
07***00	Fitting, Grease - Upper Hinge Pin	3
07***13	Connector	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Semi-Long Arm (For 1-Piece Boom)

07***00	Fitting, Grease - Upper Hinge Pin	1
07***14	Hose	2
07***80	Seal,Dust (Kit)	2
20***10	Arm Ass'Y,Semi-Long	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Slope Finishing Bucket

07***75	Fitting,Grease (Without Lub. Piping)	3
20***10	Bucket	1
21***30	Link Ass'Y	1
21***70	Bushing	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Trenching Bucket 0.30m3 Width 600mm

01***69	Bolt	8
01***28	Nut (Std)	8
20***61	Adapter (Welded)	3
20***72	Tooth	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment : Trenching Bucket 0.40m3 Width 700mm

01***69	Bolt	8
01***28	Nut (Std)	8
20***61	Adapter (Welded)	4
20***72	Tooth	4

See all parts with full part numbers in Heavy Parts AI →

Work Equipment Control System

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Additional Safety Valve

07***34	O-Ring, O-Ring,Drain Plug? R.H. Half Tank	1
07***34	O-Ring, O-Ring, Oil Level And Fill Plug	2
70***10	O-Ring (Kit)	1
70***50	Spring	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Air Piping (Air Dryer Line)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	10
01***09	Nut,(With Body Positioner)	2
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	8

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Arm Cylinder

01***45	Screw	2
01***55	Bolt,(10m)	2
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***35	Bolt,(For Quick Shift) (Mitsubishi)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Arm Cylinder (Lock Valve For Work Equipment)

01***50	Bolt (Kit)	4
01***70	Bolt (Op)	4
01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***35	Bolt,(For Quick Shift) (Mitsubishi)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Boom Cylinder

01***45	Screw	4
01***55	Bolt,(10m)	4
01***30	Bolt,(For Quick Shift) (Mitsubishi)	2
01***35	Bolt,(For Quick Shift) (Mitsubishi)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Boom Cylinder (Lock Valve For Work Equipment)

01***50	Bolt (Kit)	8
01***60	Bolt,(For Japan And Sweden)	8
01***35	Bolt,(For Quick Shift) (Mitsubishi)	8
01***40	Bolt, Mount Master Brake Cylinder	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Bucket Cylinder

01***45	Screw	4
01***55	Bolt,(10m)	4
01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Pump (Except Japan)

01***30	Screw	3
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	3
01***32	Washer, (Without Emergency Steering)	3
04***20	Pin,Dowel (Welded)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Valve? L.H. (Boom? Bucket High? Swing? Outrigger) (1/4)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***16	Bolt (Op)	12
01***25	Bolt, Seal Cover Mounting	4
07***07	O-Ring - (K7)	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Valve? L.H. (F-R Left? Arm? Swing Comprensated) (2/4)(#1001-1212)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***16	Bolt (Op)	4
01***50	Capscrew	4
07***07	O-Ring - (K7)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Valve? L.H. (F-R Left? Arm? Swing Comprensated) (2/4)(#1213-)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***25	Bolt, Seal Cover Mounting	4
01***50	Capscrew	4
07***15	O-Ring,(Without Boom Kickout)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Valve? L.H. (Relief Valve) (3/4)

01***10	Nut,Lock	1
07***14	O-Ring,(F4350-63a1a-2 )	1
07***34	O-Ring, O-Ring, Oil Level And Fill Plug	1
07***34	O-Ring, At Transmission Filter	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Valve? L.H. (Safety Valve) (4/4)

07***34	O-Ring, O-Ring, Oil Level And Fill Plug	3
70***10	O-Ring (Kit)	1
70***50	Spring	2
70***10	Sleeve	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Valve? R.H. (Arm Excavation? Throttling Valve) (1/4)

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Valve? R.H. (Boom? Bucket Excavation? F-R Right) (2/4)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	2
01***16	Bolt (Op)	8
01***50	Capscrew	4
07***07	O-Ring - (K7)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Valve? R.H. (Relief Valve) (3/4)

01***10	Nut,Lock	1
07***14	O-Ring,(F4350-63a1a-2 )	1
07***34	O-Ring, O-Ring, Oil Level And Fill Plug	1
07***34	O-Ring, At Transmission Filter	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Control Valve? R.H. (Safety Valve) (4/4)

07***34	O-Ring, O-Ring, Oil Level And Fill Plug	4
70***10	O-Ring	1
70***10	O-Ring (Kit)	1
70***50	Spring	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Counter Balance Valve(#1001-1212)

01***35	Bolt,(For Quick Shift) (Mitsubishi)	4
01***40	Bolt, Mount Master Brake Cylinder	4
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	8
07***10	O-Ring,Plate	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Fuel And Hydraulic Tank

01***20	Bolt,(With Auto Emergency Steering)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	11
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4
01***35	Bolt,R.H. Outside And L.H. Inside	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Fuel And Hydraulic Tank (Noise Suppression For Ec)(#1468-)

01***20	Bolt,(With Auto Emergency Steering)	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	7
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4
01***35	Bolt,R.H. Outside And L.H. Inside	6

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Equipment Related Parts

01***16	Bolt (With Air Heater & Conditioner)	2
01***20	Bolt,(With Auto Emergency Steering)	6
01***25	Bolt,Without Revolution Sensor	2
01***50	Bolt (Kit)	5

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (1/8) (L.H.? P.P.C)(#1001-1143)

01***25	Bolt,Without Revolution Sensor	9
01***20	Bolt,(For Quick Shift) (Mitsubishi)	3
01***30	Bolt,(Not Used With Emergency Str.)	2
01***25	Washer,Spring?For Additional Rear Lam	9

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (1/8) (L.H.? P.P.C)(#1144-)

01***25	Bolt,Without Revolution Sensor	9
01***20	Bolt,(For Quick Shift) (Mitsubishi)	3
01***30	Bolt,(Not Used With Emergency Str.)	2
01***25	Washer,Spring?For Additional Rear Lam	9

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (2/8) (R.H.? P.P.C)(#1001-1143)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	4
01***32	Washer,(With Auto Emergency Steering)	4
07***18	O-Ring,(See Fig.1601-29?1602-17)	4
07***23	O-Ring,(For 2nd Travel Speed) (Op)	29

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (2/8) (R.H.? P.P.C)(#1144-)

01***20	Bolt,(For Quick Shift) (Mitsubishi)	4
01***32	Washer,(With Auto Emergency Steering)	4
07***18	O-Ring,(See Fig.1601-29?1602-17)	4
07***23	O-Ring,(For 2nd Travel Speed) (Op)	29

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (3/8) (Accumulator? P.P.C. Return)

01***25	Bolt,(Without Rops Guard? Canopy)	2
01***09	Nut,(With Body Positioner)	2
01***14	Nut	2
01***23	Washer, Wiring Harness Mounting Bracket	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (4/8) (Block To Connector)

07***23	O-Ring,(Crusher?Other Att.For Ppc Con	17
07***10	Union,(For 2nd Travel Speed) (Op)	15
07***10	Elbow,(For Long Lever Control)	1
08***19	Band,(Without Air Conditioner)	8

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (5/8) (Connector To Valve)

01***60	Bolt, Mount Tube To Switch Pump	4
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	4
07***23	O-Ring,(Crusher?Other Att.For Ppc Con	22
07***10	Union,(For Cross Link)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (6/8) (Boom? Arm)(#1001-1212)

01***30	Bolt,(For Mechanical Governor)	72
01***45	Screw	4
01***55	Bolt,(10m)	4
01***80	Bolt,(Not Shown)	7

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (6/8) (Boom? Arm)(#1213-)

01***30	Bolt,(For Mechanical Governor)	64
01***65	Bolt,(Except Japan)	2
01***80	Bolt,(Not Shown)	2
01***85	Bolt,(For 2nd Travel Speed) (Op)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (7/8) (Bucket)

01***30	Bolt,(For Mechanical Governor)	40
01***30	Bolt,(Not Used With Emergency Str.)	4
01***50	Bolt,(For Strengthened Cover)	7
01***11	Nut,(With Under Mirror)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (8/8) (Valve To Boom Cylinder)(#1001-1212)

01***30	Bolt,(For Mechanical Governor)	68
01***35	Bolt,(For Position Fixing)	12
01***40	Bolt,(With Air Conditioner)	4
01***50	Bolt (Kit)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (8/8) (Valve To Boom Cylinder)(#1213-)

01***30	Bolt,(For Mechanical Governor)	68
01***35	Bolt,(For Position Fixing)	8
01***40	Bolt,(With Air Conditioner)	4
01***50	Bolt (Kit)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Outrigger)

01***30	Bolt,(For Mechanical Governor)	8
01***20	Bolt,(For Quick Shift) (Mitsubishi)	3
01***25	Washer,Spring?For Additional Rear Lam	8
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Valve To Arm Cylinder) (Lock Valve For Work Equipment)

01***25	Bolt,(Without Rops Guard? Canopy)	2
01***32	Washer,(Not Used With Emergency Str.)	2
07***11	O-Ring (Kit)	1
07***23	O-Ring,(Crusher?Other Att.For Ppc Con	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Valve To Boom Cylinder) (Lock Valve For Work Equipment)

01***30	Bolt,(Not Used With Emergency Str.)	2
01***55	Bolt, Mount Lh Bracket	1
01***36	Wahser-Spring, Washer,Spring (Without Towing Winch)	3
07***11	O-Ring (Kit)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump? End Cap (4/6)

01***40	Bolt,(For Position Fixing)	2
01***25	Washer,Spring?For Additional Rear Lam	2
04***22	Bolt,Eye	1
07***21	O-Ring,Water Piping	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump? Front (2/6)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	6
01***23	Washer,(With Auto Emergency Steering)	6
07***65	O-Ring,Injection Pump Case	1
07***75	O-Ring,Steering Oil Filter	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump? Front (3/6)

01***30	Bolt,(For Mechanical Governor)	8
01***40	Bolt,(With Air Conditioner)	4
01***23	Washer, Wiring Harness Mounting Bracket	8
07***55	O-Ring,Front Accessory Drive	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump? Rear (5/6)

07***23	O-Ring,(F4350-68a0 -13 )	1
07***34	O-Ring, O-Ring,Drain Plug? R.H. Half Tank	1
07***12	Plug,Magnetic	1
72***70	Plug	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump? Rear (6/6)

01***23	Bolt	4
01***30	Bolt,(For Mechanical Governor)	4
01***40	Bolt	4
01***23	Washer, Wiring Harness Mounting Bracket	8

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump? Related Parts (1/6)

01***85	Bolt,(For 2nd Travel Speed) (Op)	3
01***30	Washer,Spring(Sandy?Dusty Terrain S.)	3
01***25	Washer,Spring?For Additional Rear Lam	8
04***16	Pin,(Dowel)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Lower Air Piping (1/2) (Swivel Joint To Air Master)

01***12	Bolt, Bolt,(No Need To Quick Shift)	4
01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***12	Bolt,(With Cylinder Cover)	1
01***20	Bolt,(With Auto Emergency Steering)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Lower Air Piping (2/2) (Air Master To Brake)

01***20	Bolt,(With Auto Emergency Steering)	3
01***20	Bolt,(For Quick Shift) (Mitsubishi)	9
01***08	Nut (Op)	2
01***25	Washer,Spring?For Additional Rear Lam	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Outrigger Cylinder

01***45	Screw	4
01***55	Bolt,(10m)	4
01***30	Bolt,(For Quick Shift) (Mitsubishi)	2
01***35	Bolt,(For Quick Shift) (Mitsubishi)	12

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : P.C. Servo Valve? For Front Hydraulic Pump

07***10	O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010	3
07***48	O-Ring,(F4350-64a0 -21 )	1
07***10	O-Ring,Plate	2
70***40	Servo Valve Ass'Y,Front	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : P.C. Servo Valve? For Rear Hydraulic Pump

07***10	O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010	3
07***48	O-Ring,(F4350-64a0 -21 )	1
07***10	O-Ring,Plate	2
70***40	Servo Valve Ass'Y,Rear	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : P.P.C. Circuit Shuttle Valvel

04***93	Ball,Steel	2
07***07	O-Ring - (K10)	3
07***09	O-Ring,(For Dual Tilt Dozer)	1
07***23	O-Ring,(For 2nd Travel Speed) (Op)	3

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Proportional Pressure Control Valve

04***12	Pin, Spring	2
07***20	O-Ring,Relief Valve	4
07***12	Plug,Taper	2
70***00	Valve Ass'Y	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Proportional Pressure Control Valve? For Travel

01***10	Bolt	2
07***20	O-Ring,Relief Valve	1
07***23	O-Ring,(Crusher?Other Att.For Ppc Con	2
07***09	Plug,(For 2-Actuater Attachment)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Relief Valve? For Hydraulic Pump(#1001-1185)

07***34	O-Ring, O-Ring,Drain Plug? R.H. Half Tank	1
70***10	O-Ring (Kit)	1
70***01	Valve Assembly; Relief - Komatsu S/N 22001 & Abv. - Was 708-23-14801, Valve Assembly; Relief - Komatsu S/N 20501 & Abv. - Was 708-23-14801, Valve Ass'Y	1
(7***0)	Pump Ass'Y,(Hpv55+55)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Relief Valve? For Hydraulic Pump(#1186-)

07***10	O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010	1
07***34	O-Ring, O-Ring,Drain Plug? R.H. Half Tank	1
70***10	O-Ring (Kit)	1
70***50	Nut	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Shuttle Valve

01***25	Bolt	8
01***19	Washer,Spring (With Extinguisher) (D31p)	8
07***21	O-Ring (Kit)	2
70***40	Plate	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Steering Valve

20***80	Valve Ass'Y	1
ST***80	Screw,Set	1
ST***29	Race,Bearing	2
ST***-7	Gerotor	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Suction And Safety Valve

07***34	O-Ring, O-Ring, Oil Level And Fill Plug	1
70***60	O-Ring (Itl)	1
70***30	Ring,Back-Up	1
70***01	Valve Ass'Y,Suction And Safety? Bucket	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Suction Valve

07***34	O-Ring, O-Ring, Oil Level And Fill Plug	1
70***50	Spring	1
70***10	Sleeve	1
70***00	Valve, Suction (3-Spool)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Upper Air Piping (1/6) (Compressor To Reservoir)

01***25	Bolt,Without Revolution Sensor	2
01***20	Bolt,(For Quick Shift) (Mitsubishi)	1
01***25	Bolt,(For Canvas Canopy?Head Guard)	4
01***30	Bolt,(For Quick Shift) (Mitsubishi)	4

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Upper Air Piping (2/6) (Reservoir To Block? Brake)

01***16	Bolt, Battery To Frame Ground Wire Attaching	1
01***19	Nut	2
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	1
01***60	Washer,(Without Rops Guard? Canopy)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Upper Air Piping (3/6) (Reservoir Hydraulic Tank)

01***16	Bolt, Mount Washer Tank To Bracket, Bolt	2
01***25	Bolt,(For Canvas Canopy?Head Guard)	6
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	6
01***23	Washer,(With Auto Emergency Steering)	2

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Upper Air Piping (4/6) (Parking Brake To Block)

01***25	Bolt,(For Canvas Canopy?Head Guard)	1
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	1
07***11	Plug,(For Shipping)	2
07***00	Elbow	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Upper Air Piping (5/6) (Brake Lock Valve To Block)

01***40	Bolt, Mount Master Brake Cylinder	3
01***16	Washer,(With Water Separator)	3
07***11	Plug (Shipping Only)	1
07***12	Plug,(For Ec)	1

See all parts with full part numbers in Heavy Parts AI →

Komatsu : Pw150-1(S/N 1001-Up) : Work Equipment Control System : Upper Air Piping (6/6) (Valve To Swivel Joint)

01***25	Bolt,(For Canvas Canopy?Head Guard)	2
01***50	Screw	4
01***03	Nut (Welded)	4
01***30	Washer, Spring (Supplied W/Spider Assembly), Washer-Spring	2

See all parts with full part numbers in Heavy Parts AI →

PW150-1(S/N 1001-UP) serial number reference

On PW150-1 wheeled excavators the PIN/serial plate is riveted to the chassis, commonly toward the front or right-hand side near the cab base; it can be dirty, painted over, or hard to spot on older units, so look for a rectangular riveted plate or its outline if not immediately visible. Read the model designation (PW150-1) straight off the plate, followed by the serial number - for this generation there is no separate letter code ahead of the digits, so the number itself (starting at 1001) is the production sequence to use for parts and manual lookups.

Prefix	Identifies	Notes
1001-UP	Standard production wheeled excavator, single serial block (no lettered PIN prefix)	Entire PW150-1 production run sits in one continuous serial block starting at 1001. Factory literature for this generation carries no lettered prefix ahead of the number. Fitted with the Komatsu 6D95L-1 series diesel, rated around 65kW (87HP), on a roughly 15.5t class wheeled excavator built roughly 1987-1992. Later PW150 generations (PW150-6, PW150ES-6K) switch to a lettered prefix system - that scheme does not apply to this 1001-UP family. Any regional or export sub-variant within this block is not documented in public sources; confirm with your dealer if a machine falls outside the plain numeric sequence.

Frequently asked questions

What engine does the Komatsu PW150-1 (S/N 1001-UP) use?

It runs the Komatsu 6D95L-1 series, a six-cylinder, water-cooled diesel rated around 65 kW (87 HP). The engine is mechanically governed and predates any electronic control module, so it has no diagnostic fault codes, only analog warning lamps.

What is the operating weight of the PW150-1?

Standard configuration operating weight is about 15.5 t (34,170 lb / 15,500 kg), riding on 10.00-20 tires with a rear outrigger standard and a front outrigger optional. No alternate long-chassis or heavy-duty variant is documented for this serial range.

What replaced the Komatsu PW150-1?

Komatsu did not continue the PW150 name on a direct numbering path after this generation ended production in 1992. The name returned years later with the PW150-6 and PW150ES-6 generations, which use a different chassis, a different engine, and a lettered serial-prefix system in place of the plain 1001-UP numeric block used on this machine.

What PW150-1(S/N 1001-UP) owners discuss

What should I expect from the hydraulics on cold start with this machine?

Slow, heavy boom and arm response on cold start is normal for this generation. The PW150-1 predates electronic pump control, so oil viscosity alone governs response until operating temperature is reached, typically after 10-15 minutes of idle or light work. What is not normal is sluggish hydraulics that persist well after warm-up, or a gradual loss of digging force under load. Persistent slowness once the machine is fully warm usually points to a worn main relief valve or pump wear rather than cold oil. Have your dealer verify relief pressure before condemning the pump.

Why doesn't this machine throw any fault codes when the engine runs poorly?

The 6D95L on this machine is mechanically governed and predates any engine control module, so there is no diagnostic code system to consult. That is expected, not a sign of a stripped-down machine. Diagnosis falls back to classic mechanical-diesel symptoms: black exhaust smoke under load usually traces to injector wear or fuel-pump timing drift rather than a sensor fault, and hard or no-start in cold weather is more often a fuel-screen or glow-plug issue than an electrical one. Owners of machines from this era rely on smoke color, exhaust sound, and a compression or pop test rather than a scan tool.

What wear patterns show up on the axles and steering of a wheeled excavator like this one?

General experience with older wheeled excavators applies here. Feathering or one-sided tire wear usually signals worn steering kingpins or bushings rather than a tire quality problem, and looseness or a clunk felt through the steering on turns often traces to the same components. Play in the front axle when rocked side to side, or turning response that differs left versus right, calls for a kingpin and tie-rod inspection before assuming a steering-cylinder fault. Have your dealer verify axle and steering component wear before returning the machine to service.

What are the common electrical gremlins on a machine this old?

Because this generation predates any onboard computer, the electrical system is limited to charging, starting, and basic gauge and sender circuits, with no network of sensors to fail. The most common complaints on Komatsu diesel machines of similar age are charging-system related: a flickering or lit charge light usually traces to a worn alternator, a bad exciter or indicator wire, or a failed gauge cluster rather than the alternator itself. Corroded connectors and brittle insulation from decades of service are more often the root cause of an intermittent gauge reading or hard start than a failed sender.

What should I feel or listen for in the swing and upper structure?

As with any aged excavator, play felt when rocking the upper structure against the frame, or a knock on swing start and stop, points to swing-bearing or swing-gearbox wear rather than a hydraulic fault. Contaminated hydraulic oil is the most common root cause of premature swing-motor wear on machines that have gone long stretches between fluid changes. Have your dealer verify swing-bearing mounting torque and bearing play before returning the machine to heavy-duty service.

Is running and maintaining a wheeled excavator like this different from a tracked machine of similar size?

General wheeled-versus-tracked experience applies. Wheeled excavators trade the flotation and side-slope stability of tracks for road speed and lower ground disturbance, so operators note reduced stability digging near ditch edges or on soft, uneven ground. Stabilizer and blade condition matter more on a wheeled machine because they do the stabilizing job a track undercarriage otherwise handles passively. Tire wear and inflation get checked far more often on this configuration than undercarriage wear would be on a crawler, since tire condition drives both ride quality and digging stability.

What should I check before buying a used PW150-1 (S/N 1001-UP)?

Start it cold and watch exhaust smoke color and listen for even running before it clears; this era has no scan tool to fall back on. Compare hydraulic response cold versus fully warm; a machine still sluggish after warm-up suggests relief-valve or pump wear. Rock the front axle and check steering for play, and inspect tires for feathering or one-sided wear that points to kingpin or tie-rod wear. Rock the upper structure for swing-bearing play and listen for a knock on swing start and stop. Check stabilizer and blade wear given the wheeled configuration, and look for any sign of oil cross-contamination or repeated overheating. Ask for service history covering the fuel-injection pump and timing work, and inspect wiring and connectors for age-related corrosion. Because steering, axle, and swing-bearing condition are safety-related, have your dealer verify these items before the machine returns to regular service.

Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.

Need a specific PW150-1(S/N 1001-UP) part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app