Komatsuhydraulic excavatorsmall ( - pc90)
Komatsu PC75UU-2(S/N 5001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu PC75UU-2 (S/N 5001-Up) is a 7.5-tonne-class hydraulic excavator built around Komatsu's ultra-tight tail-swing (UU) frame and an offset/knuckle boom, letting it dig tight against walls or curbs without swinging the counterweight past the tracks. Power comes from the Komatsu 4D95L-1, a naturally aspirated 4-cylinder diesel of about 3.26 L displacing roughly 41 kW (55 HP) gross, mechanically governed with no electronic engine control. Operating weight runs about 7,490-7,600 kg (16,510-16,750 lb) depending on undercarriage, blade, and boom setup. This serial block sits between the original PC75UU-1 (S/N 1001-Up) and the later PC75UU-3 (S/N 15001-Up), and it left the factory with offset-boom, canopy or cab, rubber- or steel-track, and single- or two-speed travel options, plus an optional dozer blade.
Across the UU-2 run Komatsu kept the same tight-swing chassis and offset-boom geometry but refined hydraulic controls and swing-circuit plumbing versus the -1; the follow-on PC75UU-3 kept that layout and moved to the higher-output 4D95LE engine family, trading some of the -2's mechanical simplicity for more power. That mechanical simplicity is exactly why the -2 still matters in the used and parts market: no ECM, no fault codes, and a governor-controlled injection pump that a generalist diesel shop can service without a laptop. Parts commonality with the wider PC75UD/PC75US/PC78 family keeps swivel-joint seals, offset-cylinder kits, and undercarriage components in steady aftermarket supply, even though factory documentation for this exact serial range is hard to find outside dealer channels. Buyers shopping this generation should budget for injection-pump timing work, starter and 24V-circuit attention, and a center-swivel-joint or undercarriage rebuild on higher-hour units.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu PC75UU-2(S/N 5001-UP) specifications
Engine
| Engine model | Komatsu 4D95L series diesel (factory parts/service literature for this serial range references the 4D95L-1); 4-cycle, water-cooled, direct injection, naturally aspirated |
| Cylinders | 4 |
| Displacement | approximately 3.26 L (199 cu in) |
| Gross power | approximately 41 kW (55 HP) |
| Net power | approximately 39.5-39.8 kW (53-54 HP) |
| Emissions tier | Pre-emissions-tier build (1990s production); no regulated emissions tier rating applies |
Weights
| Operating weight (standard configuration) | approximately 7,490-7,600 kg (16,510-16,750 lb) |
| Long-undercarriage/variant weight | No separate long-undercarriage or other weight variant documented for this serial range; the UU chassis is offered as a single configuration in available literature |
| Ground pressure | Not documented in accessible factory literature for this serial range - verify with your dealer |
| Transport weight | Matches base operating weight above for the bare machine; add-on attachment weight not documented |
Dimensions
| Transport length | approximately 6.0 m (19 ft 8 in) |
| Transport width | approximately 2.32 m (7 ft 7 in) |
| Transport height | approximately 2.67-2.70 m (8 ft 9 in - 8 ft 10 in) |
| Tail swing radius | Near-zero tail swing upperstructure paired with an offset (knuckle) boom - the defining feature of this chassis, letting the machine dig alongside walls without repositioning |
| Track shoe width | 450 mm (18 in) standard |
| Ground clearance | approximately 370 mm (14.6 in) |
| Undercarriage length | Not separately documented from transport length in accessible sources |
Performance
| Max digging depth | approximately 4.2 m (13 ft 9 in); some sources show up to 4.6 m (15 ft 1 in) - varies by arm configuration/source |
| Max reach at ground level | approximately 6.36-7.54 m (20 ft 10 in - 24 ft 9 in) - sources disagree; varies by arm/boom configuration |
| Max dump height | approximately 5.3 m (17 ft 4 in) |
| Max cutting/digging height | approximately 7.16 m (23 ft 6 in) |
| Travel speed | approximately 4.0-4.7 km/h (2.5-2.9 mph) |
| Swing speed | Not documented for this model/serial range in accessible sources - verify with your dealer |
| Gradeability | Not documented in accessible sources |
| Drawbar pull | Not documented in accessible sources |
Forces
| Bucket digging force | Not documented in accessible factory literature for this serial range - verify with your dealer |
| Arm/stick digging force | Not documented in accessible factory literature for this serial range - verify with your dealer |
Service capacities (summary)
| Fuel tank | Not documented in accessible sources for this serial range |
| Hydraulic system | Variable-displacement piston pump; max flow approximately 165 L/min (43.6 gal/min); relief valve pressure approximately 24.5 MPa (3,553 psi). Specific hydraulic tank volume not documented |
| Engine oil | Not documented in accessible sources for this serial range |
| Cooling system | Not documented in accessible sources for this serial range |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PC75UU-2(S/N 5001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not documented in accessible sources for this exact serial range (S/N 5001-UP) — verify with dealer or nameplate. The PC75UU-2 uses the naturally aspirated 4-cylinder Komatsu 4D95L-1 diesel; oil-pan refill on this engine family is commonly cited around 8-9 L (2.1-2.4 US gal) but this figure is not confirmed against the PC75UU-2 chassis-specific manual, so treat as unverified | Komatsu genuine engine oil (EO), API CD/CF-4 class diesel oil. Viscosity selected by ambient temperature per the OMM chart, typically SAE 10W in cold climates, 15W-40 or 30 in temperate to warm climates |
| Cooling system | Not documented in accessible sources for this exact serial range — verify with dealer or nameplate | Komatsu genuine antifreeze/coolant (AF-NAC type, permanent ethylene-glycol coolant), mixed with clean soft water per the OMM's freeze-protection table for the operating region |
| Fuel tank | Not documented in accessible sources for this exact serial range — verify with dealer or nameplate | Diesel fuel meeting the OMM's specified cetane/sulfur requirements; use winter-grade or kerosene-blended fuel in cold ambient temperatures per the OMM's seasonal fuel guidance |
| Hydraulic system total / hydraulic tank | Not documented in accessible sources for this exact serial range — verify with dealer or nameplate. Given the machine's operating weight class (about 7.5 t), total system volume is commonly in the low-to-mid triple-digit liter range on comparable Komatsu compact excavators, but no capacity for this specific chassis is documented | Komatsu genuine hydraulic oil, viscosity graded by ambient temperature per the OMM chart (lighter grade for cold climates, heavier for hot climates) |
| Final drive (each) | Not documented in accessible sources for this exact serial range — verify with dealer or nameplate | Komatsu genuine gear oil or engine oil per the final-drive lubrication table in the OMM (final-drive case fill spec varies by Komatsu excavator generation between gear oil and engine-oil grades) |
| Swing drive | Not documented in accessible sources for this exact serial range — verify with dealer or nameplate | Komatsu genuine gear oil or engine oil per the swing-drive lubrication table in the OMM, matching the final-drive fluid family for this machine generation |
| Pilot / other circuits | Not separately documented — no distinct pilot-circuit reservoir is called out in available sources; pilot circuit shares the main hydraulic tank on this excavator class | Same hydraulic oil as the main hydraulic system |
| Grease (spec only) | Not applicable — lubricated per grease-point schedule, no reservoir capacity | Komatsu genuine grease (lithium-base multipurpose grease), with molybdenum-disulfide grease at pin/bushing points calling for it per the OMM lubrication chart |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu PC75UU-2(S/N 5001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 4,000 h |
|
Servicing the PC75UU-2(S/N 5001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
This engine and hydraulic system predate electronic diagnostics, so the Machine Monitor's lamps, gauges, and buzzer are the only onboard warning path. Pull engine oil (EO) and hydraulic oil samples on a fixed interval to catch injection-pump wear metal, coolant intrusion, or hydraulic varnish before pilot and spool valves start sticking. Watch final-drive and swing gear oil for metal fines, an early sign of roller-flange or bearing wear, and check center-swivel-joint drain oil for cross-contamination between the travel and swing circuits.
Corrective & Common Repairs
Black smoke and hard starting on this generation usually trace to injection-pump timing drift or a stuck delivery valve, not the injectors themselves; re-time per the shop manual before swapping parts. A dragging or smoking starter points to worn brushes or corroded 24V start-circuit connections. Pilot and main spool sticking is almost always varnished old hydraulic oil; flush and refill rather than chasing individual valves. Swing surging or lagging at high RPM calls for a relief-valve check, and a slow center-swivel-joint leak means the seal kit needs replacing.
Overhaul & Rebuild Points
Offset-boom knuckle and pivot-pin wear shows up around 3,000 hours; measure bushing clearance and rebuild the joint before it migrates into the offset cylinder. Undercarriage roller and idler flange wear is the other high-hour item on this UU chassis; replace rollers, idlers, and sprocket as a set to keep travel tracking straight. Once the injection pump can no longer hold timing, a bench rebuild or recalibration is the fix, not repeated adjustment. Rebuild swing and travel motor seals together when gear oil shows contamination from a leaking center swivel joint.
Seasonal & Environment Servicing
Cold starts are the weak point on this pre-ECM engine; keep batteries, cables, and the 24V start circuit corrosion-free and run winter-grade EO oil, since a sluggish starter here often means electrical, not mechanical, failure. In hot or dusty work, keep the radiator and oil cooler fins clear and check AF-NAC coolant concentration more often. On wet or muddy sites, grease the offset-boom pivot and undercarriage more frequently and keep the center swivel joint's breather and seals free of grit. For storage, block tracks and protect exposed rods from corrosion.
PC75UU-2(S/N 5001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 09637-30161 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 09637-30661 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 07000-02135 | O-Ring,Hydraulic Oil Filter | Hydraulic service | Check fitment → |
| 07000-01235 | O-Ring,Hydraulic Oil Filter | Hydraulic service | Check fitment → |
| 07000-02080 | O-Ring,Hydraulic Oil Filter | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PC75UU-2(S/N 5001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Charge caution lamp (battery symbol) | Charging circuit not producing normal output; monitor lamp lights with engine running | Slipping or broken alternator belt, worn/failed alternator, loose or corroded battery or harness connections | Stop and check belt tension, inspect alternator output and battery terminal/earth connections before continuing to run the engine |
| Battery electrolyte level caution lamp | Battery electrolyte has dropped below the specified level | Normal evaporation on an older battery, overcharging from a faulty regulator, or a cracked case leaking electrolyte | Check electrolyte level in each cell, top up with distilled water only, and test the charging system if the lamp recurs |
| Engine oil pressure caution lamp | Engine oil pressure has dropped below the safe minimum while running | Low oil level, clogged oil filter, worn oil pump or bearings, or a faulty oil pressure switch | Shut the engine down immediately, check oil level and filter condition, and verify the pressure switch and wiring before restarting |
| Preheating (glow) pilot lamp | Indicates the intake air preheat circuit is active or has failed to time out normally during cold starting | Faulty preheat relay/timer, open glow element circuit, or a wiring fault in the starting circuit | Check the preheat relay and glow circuit continuity per the wiring diagram; do not prolong cranking if the lamp behaves abnormally |
| Electric system caution lamp | Monitor system has detected a general fault in the machine wiring or a monitor/harness communication problem | Loose or corroded connector, blown fuse, chafed harness wiring, or a poor earth strap connection | Inspect fuses and harness connectors first, then follow the monitor-system troubleshooting chart to isolate the circuit |
| Coolant temperature gauge in red zone / overheat warning | Engine coolant temperature has exceeded the normal operating range | Low coolant level, clogged radiator fins, slipping fan belt, or a stuck thermostat | Stop the machine in a safe location, let it cool, then check coolant level, fan belt, and radiator before resuming work |
| Alarm buzzer sounds with no caution lamp lit | Monitor buzzer circuit itself is faulty, sounding without a corresponding gauge or lamp fault | Faulty buzzer unit, shorted buzzer wiring, or a monitor panel internal fault | Check the buzzer and its wiring per the monitor-system troubleshooting chart before assuming a real gauge fault exists |
| "EE" shown on display, engine will not crank | Not a documented factory diagnostic code for this serial range; anecdotal field reports link it to a starting/charging circuit problem rather than a defined trouble code | Weak or mismatched batteries, poor battery/earth connections, or an intermittent starting-circuit fault | Load-test both batteries and check all starting and earth connections; treat this as a symptom to chase electrically, not a lookup-able fault code |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PC75UU-2(S/N 5001-UP) attachments & work tools
Buckets
Standard pin-on GP bucket for this ultra-tight-tail-swing 7.5 t class runs about 650 mm (26 in) wide. Bucket-to-arm linkage pin bore is about 50 mm, shared across the Komatsu PC60/PC75/PC75UU pin family, so GP, HD, and rock buckets built for that shared pin size and for the 4.5-8.0 t carrier class fit directly. Most units in the field run pin-on buckets as delivered; coupler-mounted buckets are an aftermarket fitment, not the factory standard. Heaped/struck capacity in m3 is not documented in available literature for this exact serial range - capacity varies by configuration/series, confirm against the shop manual or dealer before ordering.
Hydraulic hammers
This machine falls in the Komatsu PC60-PC90 mini/compact excavator family that hydraulic breaker makers size for 6-9 tonne carriers. Typical tool/moil-point diameter for that class is about 68-75 mm, with breaker-rated flow around 50-90 L/min (13-24 GPM), matching a medium-pressure auxiliary circuit rather than a high-flow one. Treat exact breaker service-weight class as brand-dependent - confirm against the specific hammer's carrier-weight rating.
Quick couplers
A factory hydraulic quick coupler is not standard on the PC75UU-2; many machines in the field run without one. The common retrofit is a manual pin-grabber/wedge-style mechanical coupler sized to the 50 mm bucket-pin family. A hydraulic coupler can be fitted but ties up the machine's auxiliary hydraulic line, so it competes with a hammer or thumb circuit unless a second (4-line) auxiliary circuit is also added.
Thumbs/grapples
Hydraulic thumb: the rear valve bank normally carries a spare spool position reserved for a thumb or hammer, run through a floor-mounted pilot valve on the left side of the cab; wiring a working spool and pilot lines into that position is a known but non-trivial retrofit on units that left the factory without a thumb. A simpler no-hydraulics option is a mechanical clamp-style thumb pinned to the bucket linkage. Grapples: a hydraulic selector/sorting grab with Hardox wear tines is sold specifically fitted to the PC75UU-2 for the 4.5-8.0 t class; fixed mount is the base configuration, and 360-degree hydraulic rotation is optional but needs a dual-line (4-pipe) auxiliary circuit, or a solenoid diverter valve kit if the machine only carries the standard single two-line circuit.
Rippers
No dedicated ripper attachment is documented specifically for the PC75UU-2 in available literature. Compact excavators in this class more commonly carry a single ripper tooth or stick-rake bolted through the bucket linkage pin rather than a standalone ripper attachment. Ripper fitment for this exact serial range is unverified - confirm with a dealer or attachment supplier before ordering.
Hydraulic-kit notes
As delivered, the PC75UU-2 commonly carries a single medium-pressure two-line auxiliary circuit, adequate for a small hammer or a single-acting thumb. Double-acting tools such as a hydraulically rotating grapple or a tilt bucket need the optional second auxiliary line (4-pipe/dual circuit) or a solenoid diverter valve kit added to the existing single circuit. Auxiliary fitment varied unit to unit on this model, so verify the actual circuit configuration before ordering flow-hungry attachments.
All PC75UU-2(S/N 5001-UP) assemblies by section
Every catalogued assembly group for the Komatsu PC75UU-2(S/N 5001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
4d95l-1ff Engine S/N 131803-Up
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Air Cleaner (Double Element Type)
| 04***10 | Ring,See Fig. K4010-65a0 | 1 |
| 60***30 | Element Ass'Y,(Double Element)(Not Shown) | 1 |
| 60***40 | Element Ass'Y,(Double Element)(Not Shown) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Air Cleaner (Single Element Type)
| 04***10 | Ring,See Fig. K4010-65a0 | 1 |
| 60***40 | Element Ass'Y,(Double Element)(Not Shown) | 1 |
| 60***11 | Washer,Seal (K26) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Air Intake(#131803-168762)
| 01***25 | Stud | 1 |
| 01***12 | Bolt,(With Speedometer) | 4 |
| 01***25 | Bolt,(With Corrosion Resistor) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Air Intake(#168763-)
| 01***25 | Stud | 1 |
| 01***12 | Bolt,(With Speedometer) | 4 |
| 01***25 | Bolt,(With Corrosion Resistor) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Alternator (15a) (With Non Hardenig Pulley) (Inner Parts)
| 60***50 | Alternator A. (15a) | 1 |
| KD***70 | Cover | 1 |
| KD***30 | Retainer | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Alternator Mounting (15a) (With Non Hardening Pulley)
| 01***25 | Bolt,(With Corrosion Resistor) | 1 |
| 01***55 | Bolt,(With Engine Stop Motor Type) | 1 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Camshaft And Tappet
| 01***20 | Screw | 2 |
| 04***16 | Fitting Wedge | 1 |
| 62***31 | Thrust Washer | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Cooling Fan
| 01***50 | Bolt,(With Corrosion Resistor) | 6 |
| 01***20 | Bolt,(For Japan Pc200) | 6 |
| 60***20 | Fan,Cooling | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Crank Pulley (Non Hardening)
| 61***20 | Bolt | 1 |
| 62***10 | Washer | 1 |
| 62***40 | Pulley?Non Hardening | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Crankshaft
| 62***00 | Main Metal Ass'Y | 5 |
| 62***00 | Thrust Metal Ass'Y | 1 |
| 62***00 | Main Metal Ass'Y | 5 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Cylinder Block
| 04***20 | Pin,Dowel (Welded) | 2 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
| 04***08 | Adapter Sleeves | 6 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Cylinder Block Cover
| 01***14 | Bolt | 2 |
| 61***20 | Gasket,Plate | 1 |
| 62***10 | Plate | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Cylinder Block Gasket Kit(#131803-150680)
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 1 |
| 07***20 | O-Ring,Relief Valve | 1 |
| 07***65 | O-Ring,Injection Pump Case | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Cylinder Block Gasket Kit(#150681-)
| 01***12 | Washer,Lock (Noise Suppression Spec.) (K2) | 1 |
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 1 |
| 07***20 | O-Ring,Relief Valve | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Cylinder Head
| 01***32 | Washer, (Without Emergency Steering) | 17 |
| 02***04 | Plug, Pipe | 1 |
| 07***10 | Plug, Expansion | 9 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Cylinder Head Gasket Kit(#131803-150680)
| 07***40 | O-Ring,Water Pump Mount | 1 |
| 08***14 | Band,(For Additional Fuel Strainer) | 1 |
| 08***19 | Band,(Without Air Conditioner) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Cylinder Head Gasket Kit(#150681-)
| 07***40 | O-Ring,Water Pump Mount | 1 |
| 07***12 | Washer, Gasket,(Without Thermo Sensor) (K1) | 1 |
| 08***14 | Band,(For Additional Fuel Strainer) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Engine Mounting
| (2***0) | Bolt | 8 |
| (6***0) | Boss | 4 |
| (2***0) | Bolt | 8 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Exhaust Manifold
| 01***25 | Grub Screw | 4 |
| 01***45 | Bolt, Bracket Mounting | 8 |
| 61***50 | Nut | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Flywheel
| 01***30 | Bolt | 6 |
| 61***61 | Washer, Plain (14mm) | 6 |
| 62***92 | Gear,Ring | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Flywheel Housing
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 11 |
| 07***15 | Plug,(Used When Without Heater) | 1 |
| 61***32 | Seal? Rear (K2) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Front Cover
| 01***16 | Bolt | 2 |
| 01***20 | Bolt,(With Tachometer Outlet) | 4 |
| 01***25 | Screw | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Front Hanger
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 62***30 | Hanger,Front (W/O Corrosion Resistor) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Front Power Take Off
| 06***07 | Bearing,Roller | 1 |
| 61***60 | Bearing,Ball | 1 |
| 62***00 | Shaft Ass'Y,Power Take Off | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Filter
| 01***20 | Bolt | 2 |
| 07***12 | Gasket,(Without Air Compressor Type) (K1) | 7 |
| 07***14 | Bolt,Joint | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Feed Pump) (Inner Parts)(#131803-168762)
| DK***20 | Bolt, Joint | 1 |
| DK***00 | Valve,Check | 2 |
| DK***20 | Pump,Priming | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Feed Pump) (Inner Parts)(#168763-)
| DK***20 | Bolt, Joint | 1 |
| DK***00 | Valve,Check | 2 |
| DK***20 | Pump,Priming | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Governor) (1/2) (Inner Parts)(#131803-168762)
| DK***00 | Shim? 2.00mm,(High Altitude Spec.) | 0 |
| DK***00 | Adapter | 1 |
| DK***30 | Governor Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Governor) (1/2) (Inner Parts)(#168763-)
| DK***00 | Shim? 2.00mm,(High Altitude Spec.) | 0 |
| DK***00 | Adapter | 1 |
| DK***00 | Washer? 1.0mm | 0 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Governor) (2/2) (Inner Parts)(#131803-168762)
| DK***40 | Gasket,Air Compressor | 2 |
| DK***00 | Nut,Cap | 1 |
| DK***00 | Bushing | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Governor) (2/2) (Inner Parts)(#168763-)
| DK***00 | Gasket | 1 |
| DK***40 | Gasket,Air Compressor | 2 |
| DK***00 | Nut,Cap | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Pump) (1/2) (Inner Parts)(#131803-168762)
| 62***90 | Injection Pump A | 1 |
| DK***30 | Bearing | 0 |
| DK***20 | Shim, 1.40mm; Was Dk029311-7220, Shim? 1.4mm | 0 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Pump) (1/2) (Inner Parts)(#168763-)
| 62***40 | Injection Pump A | 1 |
| DK***30 | Bearing | 0 |
| DK***20 | Shim, 1.40mm; Was Dk029311-7220, Shim? 1.4mm | 0 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Pump) (2/2) (Inner Parts)(#131803-168762)
| DK***40 | Shim? 0.50mm, Shim, 0.50mm; Was Dk029311-0040 | 0 |
| DK***90 | Shim? 0.25mm, Shim, 0.25mm; Was Dk029311-0590 | 0 |
| DK***20 | Plunger Ass'Y | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump (Pump) (2/2) (Inner Parts)(#168763-)
| DK***40 | Shim? 0.50mm, Shim, 0.50mm; Was Dk029311-0040 | 0 |
| DK***90 | Shim? 0.25mm, Shim, 0.25mm; Was Dk029311-0590 | 0 |
| DK***20 | Plunger Ass'Y | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump Lubrincator
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 2 |
| 07***10 | Screw, Banjo Connector (M10-1.25x20) | 1 |
| 62***30 | Pipe,Oil | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump Mounting(#131803-168762)
| 01***35 | Grub Screw | 4 |
| 01***12 | Bolt,(See Fig.0501) | 1 |
| 01***16 | Bolt,(With Alternator Cover Type) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Injection Pump Mounting(#168763-)
| 01***35 | Grub Screw | 4 |
| 01***12 | Bolt,(See Fig.0501) | 1 |
| 01***16 | Bolt,(With Alternator Cover Type) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Lift Pump
| 60***10 | Cartridge | 1 |
| 62***50 | Clamp,Filter | 1 |
| 62***91 | Pump Ass'Y,Air Vent | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Fuel Return
| 07***00 | Clip | 2 |
| 62***60 | Hose,Spill | 2 |
| 62***80 | Hose,Spill | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Glow Plug
| 60***40 | Glow Plug,Glow | 4 |
| 62***10 | Lead | 3 |
| 62***11 | Wire | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Harness Cap
| 60***80 | Cap | 1 |
| 60***90 | Cap | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Head Cover
| 61***10 | Cap, Oil Filler | 1 |
| 61***20 | Screw | 3 |
| 61***30 | Washer,(B) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Heater Signal
| 01***10 | Bolt | 1 |
| 20***60 | Bracket | 1 |
| 60***61 | Signal,Heater | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Idler Gear
| 01***70 | Bolt,(For 75a Alternator) | 1 |
| 04***12 | Pin,Spring (See Fig.0201) | 1 |
| 62***31 | Shank | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Injection Nozzle
| 01***35 | Bolt, Mount Bracket To Floor | 4 |
| 07***00 | Clip | 7 |
| 62***10 | Carrier | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Injection Piping
| 01***12 | Bolt | 2 |
| 01***25 | Screw | 2 |
| 62***10 | Tube,Injection? No.1 | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Muffler
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 2 |
| 01***06 | Nut | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Name Plate And Caution (Japanese-English) (Air Cleaner Double Element Type)
| 09***61 | Plate? Instruction,(Japanese-English) (Not Shown) | 1 |
| 62***10 | Plate? Name,(Limited Supply) (English) | 1 |
| 62***10 | Plate? Caution,Head Cover | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Name Plate And Caution (Japanese-English) (Air Cleaner Single Element Type)
| 09***61 | Plate? Instruction,(Japanese-English) | 1 |
| 62***10 | Plate? Name,(Limited Supply) (English) | 1 |
| 62***10 | Plate? Caution,Head Cover | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Nozzle Holder (Inner Parts)
| 62***10 | Holder Ass'Y | 6 |
| DK***00 | Shim? 0.75mm | 0 |
| DK***00 | Shim? 1.200mm | 0 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Oil Cooler
| 01***25 | Bolt,(With Corrosion Resistor) | 4 |
| 01***30 | Bolt,(Water Separator Spec.) | 7 |
| 01***50 | Bolt,(With Corrosion Resistor) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Oil Filter
| 01***25 | Bolt,(With Corrosion Resistor) | 8 |
| 01***35 | Screw | 3 |
| 01***85 | Bolt | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Oil Level Gauge(#131803-168762)
| 01***16 | Screw | 1 |
| 01***20 | Bolt,(For Japan Pc200) | 4 |
| 01***05 | Screw | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Oil Level Gauge(#168763-)
| 01***40 | Screw | 1 |
| 01***20 | Bolt,(For Japan Pc200) | 4 |
| 01***20 | Bolt | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Oil Pan And Suction Tube(#131803-168762)
| 01***14 | Bolt,(W/Joy Stick Str.)(W/O Heater) | 24 |
| 01***12 | Bolt,(See Fig.0501) | 1 |
| 01***16 | Screw | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Oil Pan And Suction Tube(#168763-)
| 01***14 | Bolt,(W/Joy Stick Str.)(W/O Heater) | 24 |
| 01***12 | Bolt,(See Fig.0501) | 1 |
| 01***16 | Screw | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Oil Pressure Switch
| 08***05 | Switch,Engine Oil Pressure | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Oil Pump
| 01***16 | Screw | 4 |
| 01***25 | Bolt,(With Corrosion Resistor) | 1 |
| 62***01 | Cover Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Piston
| 04***12 | Ring, Snap | 8 |
| 62***02 | Piston Ring Ass'Y,Per Cylinder | 4 |
| 62***10 | Pin,Piston | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Rear Hanger
| 62***10 | Hanger,Rear | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Rocker Arm
| 01***65 | Bolt,(For Alternator Bracket Mount) | 5 |
| 61***30 | Circlip | 2 |
| 62***00 | Shaft Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Solenoid(#168763-)
| 01***90 | Bolt,(For Large Fan) | 1 |
| 01***14 | Screw | 2 |
| 01***15 | Bolt | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Starting Motor (2.8kw) (Inner Parts)
| 60***10 | Starting Motor Ass'Y,(2.8kw) | 1 |
| 60***11 | Starting Motor Ass'Y,(2.8kw) (See Fig.A6210-B0a1) | 1 |
| KD***60 | Bracket,Center | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Starting Motor Mounting (2.8kw)
| 01***30 | Bolt | 2 |
| 07***95 | O-Ring,Transmission Strainer | 1 |
| 08***12 | Clip, Clip,(With Auto Emergency Steering) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Stop Motor(#131803-168762)
| 01***90 | Bolt, Fan Mounting | 2 |
| 01***16 | Bolt | 3 |
| 01***16 | Screw | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Water Pump
| 01***16 | Screw | 5 |
| 01***20 | Screw | 2 |
| 01***55 | Bolt,(With Engine Stop Motor Type) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Water Pump Pulley (Non Hardening)
| 04***47 | V-Belt,(With 25a Alternator) | 1 |
| 62***61 | Pulley?Non Hardening,(For Japan Pc200) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : 4d95l-1ff Engine S/N 131803-Up : Water Pump Pulley (Non Hardening) (With Car Cooler)
| 04***46 | V-Belt,Cooling Fan | 1 |
| 62***51 | Pulley?Non Hardening,(With Tension Pulley) | 1 |
Accessory
Komatsu : Pc75uu-2(S/N 5001-Up) : Accessory : Cap And Overall
| 09***50 | Overall,(Special Order) | 1 |
| 09***50 | Cap And Overall Kit | 1 |
| 09***57 | Cap,(For Japan) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Accessory : General Tools
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***00 | Nozzle, Grease Pump (Flexible Type) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Accessory : Spare Parts
| 04***47 | V-Belt,(With 25a Alternator) | 1 |
| 07***35 | O-Ring,Hydraulic Oil Filter | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 5 |
Cooling System
Komatsu : Pc75uu-2(S/N 5001-Up) : Cooling System : Condenser (Mount)
| 01***14 | Bolt | 6 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Cooling System : Condenser (Piping)
| 08***23 | Band,(With Water Separator) | 6 |
| 20***50 | Cover,(With Car Cooler) | 2 |
| 20***50 | Cover | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Cooling System : Cooling (Mounting)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 10 |
| 01***32 | Washer,(With Auto Emergency Steering) | 11 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Cooling System : Cooling (Radiator And Oil Cooler)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***14 | Bolt | 13 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Cooling System : Cooling (Sub Tank)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Cooling System : Cooling (Sub Tank) (Car Cooler Parts) (With Car Cooler)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Electrical System
Komatsu : Pc75uu-2(S/N 5001-Up) : Electrical System : Battery And Mounting
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Electrical System : Battery And Mounting (Cold Weather Spec.)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Electrical System : Battery And Mounting (Relay)
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Electrical System : Electrical (Main Harness) (Canopy And Cab)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Electrical System : Electrical (Main Harness) (Canopy And Cab) (For Mono Boom)(#7075-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Electrical System : Electrical (Safety Equipment) (Cab)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Electrical System : Electrical (Safety Equipment) (Canopy)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***35 | Bolt,(For Position Fixing) | 4 |
Engine Related Parts
Komatsu : Pc75uu-2(S/N 5001-Up) : Engine Related Parts : C00ler Compressor (Compressor)(#7563-)
| 20***80 | Compressor Ass'Y | 1 |
| TW***30 | Compressor | 1 |
| TW***90 | Bolt | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Engine Related Parts : Cooler Compressor
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***75 | Bolt,(For Shipping) | 1 |
| 01***85 | Bolt,Spring | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Engine Related Parts : Damper
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Engine Related Parts : Engine Mount (Bracket)
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Engine Related Parts : Engine Mount (Heater) (Cab)
| 20***30 | Valve,Heat Water Inlet | 1 |
| 20***70 | Elbow,(With Car Heater) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Engine Related Parts : Engine Mount (Heater) (Canopy)
| 07***12 | Plug,(For Heater-Less) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Engine Related Parts : Engine Mount (Hose)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Engine Related Parts : Engine Mount (Mount)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Engine Related Parts : Engine Mount (Switch Wiring)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
Fuel Tank And Related Parts
Komatsu : Pc75uu-2(S/N 5001-Up) : Fuel Tank And Related Parts : Fuel Tank (Fuel Line)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Fuel Tank And Related Parts : Fuel Tank (Tank)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 6 |
| 01***20 | Screw | 4 |
Guard
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Counter Weight
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 5 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Counter Weight (Telescopic Arm)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 5 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Front Cover (Cover L.H.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***80 | Bolt,(Not Shown) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Front Cover (Front Cover) (Cab)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Front Cover (Front Cover) (Canopy)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Front Cover (Tank Cover)(#10371-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
| 01***65 | Bolt,(Except Japan) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Front Cover (Tank Cover)(#5001-10370)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
| 01***90 | Bolt, Fan Mounting | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Hood (Cover)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***50 | Bolt,(With Service Valve R.H.) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Hood (Hood)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***06 | Screw | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Left Side Cover (Cab)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***40 | Screw | 9 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 9 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Left Side Cover (Canopy)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***40 | Screw | 9 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 9 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Rear View Mirror(#10064-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Right Side Cover
| 01***40 | Screw | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 20***21 | Cover,R.H | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Guard : Under Cover
Hydraulic System
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Actuator Line (Band And Mount)
| 01***60 | Bolt,(For Japan And Sweden) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Actuator Line (Boom)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***07 | Hose,(For 4wd) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Actuator Line (Bucket? Arm And Offset)
| 08***20 | Band | 6 |
| 08***38 | Band | 1 |
| 21***71 | Hose | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Actuator Line (Swing And Blade)(#5001-7927)
| 08***23 | Band,(With Water Separator) | 2 |
| 20***50 | Cover,(With Car Cooler) | 1 |
| 20***50 | Mark? 5 | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Actuator Line (Swing And Blade)(#7928-)
| 08***23 | Band,(With Water Separator) | 2 |
| 20***50 | Cover,(With Car Cooler) | 1 |
| 20***50 | Mark? 5 | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Actuator Line (Travel)(#5001-7927)
| 08***76 | Band | 1 |
| 08***38 | Band | 3 |
| 20***10 | Mark? 1 | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Actuator Line (Travel)(#7928-)
| 08***76 | Band | 1 |
| 08***38 | Band | 3 |
| 20***10 | Mark? 1 | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Attachment Line (Attachment)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Attachment Line (Telescopic Arm)
| 04***10 | Ring, Retaining | 1 |
| 07***34 | O-Ring,(For Without Brake Assistor) | 4 |
| 07***21 | Cushion,(10m) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Control Pump (Mount And Elbow)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***85 | O-Ring,(Without Fuel Level Gauge) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Delivery Line
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***11 | Clamp, Vinyl | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Drain Line(#5001-7927)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***10 | Clip | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Drain Line(#7928-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***10 | Clip | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Hydraulic Tank
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Main Pump (Mount And Elbow)
| 01***50 | Bolt,(With Service Valve R.H.) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Main Valve (Bracket)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Main Valve (Mount And Elbow) (For Front Valve)
| 01***50 | Bolt,(With Service Valve R.H.) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 5 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Main Valve (Mount And Elbow) (For Rear Valve)
| 01***50 | Bolt,(With Service Valve R.H.) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 5 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Main Valve (Mount And Elbow) (For Upper Valve)
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 3 |
| 04***10 | Ring, Retaining | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (4-Way Valve Piping) (Multiple Pattern Control)
| 01***40 | Bolt, Mount Master Brake Cylinder | 4 |
| 01***14 | Screw | 3 |
| 01***02 | Nut (1) | 6 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (4-Way Valve) (Multiple Pattern Control)
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (Additional Solenoid Valve) (Second Travel Spec.)
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (Attachment Line) (Telescopic Arm And Attachment)
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 2 |
| 07***10 | Union,(For Cross Link) | 1 |
| 07***10 | Elbow,(For Long Lever Control) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (Block)(#7075-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (Bracket)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (Lock Valve)
| 07***23 | O-Ring,(F4320-61a0 -29 ) | 1 |
| 07***07 | Plug,Housing No.2?3?4?5?6 | 1 |
| 21***60 | Valve Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (P.P.C Main Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 04***11 | Clip,(Sand And Dusty Spec.) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (P.P.C Main Line) (Multiple Pattern Control)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 04***11 | Clip,(Sand And Dusty Spec.) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (P.P.C Main Line)(#7075-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 04***11 | Clip,(Sand And Dusty Spec.) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (Pump Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***65 | Bolt,(Except Japan) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (Safety Valve)
| 01***00 | Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 9 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : P.P.C Main Line (Swing Brake Line And Decel Motor Mount)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***10 | Nut,(Without Auto Deceleration) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Return Line
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 04***11 | Clip,See Fig. K4010-04a0 | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Hydraulic System : Suction Line
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 1 |
Main/Revolving Frame And Related Parts
Komatsu : Pc75uu-2(S/N 5001-Up) : Main/Revolving Frame And Related Parts : Boom Foot Pin(#5001-7927)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Main/Revolving Frame And Related Parts : Boom Foot Pin(#7075-)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 20***40 | Spacer? 1.0mm | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Main/Revolving Frame And Related Parts : Boom Foot Pin(#7928-)
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***25 | Bolt, Seal Cover Mounting | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame
| 21***11 | Frame,Revolving | 1 |
| 21***12 | Frame,Revolving | 1 |
| 21***13 | Frame,Revolving | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame (Telescopic Arm)
| 21***20 | Frame,Revolving | 1 |
| 21***21 | Frame,Revolving | 1 |
| 21***22 | Frame,Revolving | 1 |
Marks And Plates
Komatsu : Pc75uu-2(S/N 5001-Up) : Marks And Plates : Marks And Plates (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,(Limited Supply) (English) | 1 |
| 09***61 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Marks And Plates : Plate (Cab) (English)
| 20***30 | Plate? Caution,Wiper Motor Connector | 1 |
| 20***80 | Plate? Caution,Window Automatic Lock | 1 |
Operator'S Compartment And Control System
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Ashtray
| 20***80 | Ashtray | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Canopy
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Car Cooler (Cooler Unit)(#7563-)
| 21***10 | Cooler Ass'Y | 1 |
| TW***00 | Clamp,Tube | 1 |
| TW***70 | Switch,Fan | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Car Cooler (Piping And Mount)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***20 | Bolt,(Without Air Con.) | 4 |
| 01***23 | Washer,(Without Air Con.) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Cover (Cab)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***20 | Screw | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 7 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Cover (Canopy)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***20 | Screw | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 7 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Base)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Blade Control)
| 01***30 | Bolt,Stopper | 2 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 2 |
| 01***09 | Nut,(B) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Cover? L.H.) (Cab)
| 01***23 | Washer,(Without Air Con.) | 4 |
| 20***10 | Switch,Front Wiper? Lower | 1 |
| 20***50 | Screw | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Cover? L.H.) (Canopy)
| 01***23 | Washer,(Without Air Con.) | 4 |
| 20***50 | Screw | 2 |
| 20***70 | Bolt | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Decel Motor) (Second Travel Spec.)(#5001-10370)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Electrical Parts)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Floor Frame)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***32 | Washer,(With Auto Emergency Steering) | 5 |
| 15***60 | Grommet,(For Air Con) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Foot Rest)(#7075-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***10 | Nut,(Without Auto Deceleration) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Fuel Control Dial)(#10371-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***50 | Bolt (Kit) | 1 |
| 01***16 | Screw | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Fuel Control Lever)(#10371-)
| 01***45 | Screw | 1 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Fuel Control Lever)(#5001-10370)
| 01***45 | Screw | 1 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Heater) (Cab)
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***14 | Bolt | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Heater) (Canopy)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
| 20***40 | Cap,(For Canopy) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Lever? L.H.) (With One Touch Decel)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 08***21 | Band,(For One Touch Decel) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Lever? L.H.) (Without One Touch Decel)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 20***10 | Knob,Horn | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Lever? R.H.)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 08***21 | Band,(For One Touch Decel) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Monitor System)
| 78***10 | Bulb - 1.4 Watt | 3 |
| 78***90 | Knob,Fan Rotation Selector | 2 |
| 78***50 | Socket | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Offset Control)(#10371-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***08 | Nut (Op) | 2 |
| 01***23 | Plain Washer | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Offset Control)(#5001-10370)
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Panel)
| 01***05 | Nut,(For Air Conditioner Less), Nut | 4 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 4 |
| 01***23 | Washer,(Without Air Con.) | 5 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Piping? L.H.) (Jis Pattern)(#5647-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Piping? L.H.) (Komatsu Pattern)(#5001-5646)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Piping? R.H.)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Plate)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 21***90 | Plate | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Travel Control)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***50 | Bolt | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Travel Speed Pedal) (Second Travel Spec.)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***08 | Washer,(For Fixed Type Ripper) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Wiring) (With One Touch Decel)(#10371-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Wiring) (With One Touch Decel)(#5001-10370)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Wiring)(#5001-10370)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Wiring)(#7075-10370)
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Work Equipment Control)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 20***90 | Plate | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Frame (Work Equipment Control) (Telescopic Arm And Attachment)
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Mat
| 20***42 | Floor Mat | 1 |
| 20***43 | Floor Mat | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Mat (Telescopic Arm And Attachment)
| 20***10 | Floor Mat | 1 |
| 20***11 | Floor Mat | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Mount (Floor Mount) (Cab)
| 01***90 | Bolt | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
| 07***25 | O-Ring,Corrosion Resistor | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Mount (Floor Mount) (Canopy)
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Floor Mount (Mount Parts)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Hand Rail
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***65 | Bolt,(Except Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Handle(#7928-10063)
| 01***32 | Washer, (Without Emergency Steering) | 2 |
| 11***30 | Bolt | 2 |
| 20***21 | Grip | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Heater (Hose)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 08***23 | Band,(With Water Separator) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Bracket)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***12 | Screw,(Additional Sun Visor) | 6 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab)
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 4 |
| 01***12 | Screw,(With Articulate Indicator) | 2 |
| 01***12 | Screw,(Not Shown) (For Std Cab) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door 1/2)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***08 | Screw - Clip Mounting | 5 |
| 01***12 | Screw,(Wa320-1m?1p) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door 2/2)
| 01***16 | Bolt,(For Slag Handling) | 4 |
| 01***10 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 7 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Lamp)
| 01***16 | Screw,(Sandy And Dusty Terrain S.) | 2 |
| 01***20 | Screw | 2 |
| 01***05 | Washer,(Without Window Washer) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Mount)
| 01***05 | Bolt | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 5 |
| 01***80 | Bolt,(Not Shown) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Pull Up)
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 2 |
| 01***12 | Screw,(Not Shown) (For Std Cab) | 2 |
| 01***16 | Screw | 5 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Rail)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 12 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 12 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Operator'S Seat
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 20***02 | Seat Ass'Y,Operator'S | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Radio
| 01***10 | Screw,(For Wiper Switch Earth) | 7 |
| 01***08 | Washer,(For Fixed Type Ripper) | 3 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Operator'S Compartment And Control System : Window Washer
| 08***08 | Grommet,(Without Beacon Lamp) | 1 |
| 20***20 | Nozzle Ass'Y | 1 |
| 20***70 | Hose | 1 |
Service Kit And Component Parts
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Control Pump (Pump) (Inner Parts) (For P.P.C. Main Line)
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 04***15 | Ring, Snap | 1 |
| 70***70 | Pump Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Pump (Control Piston) (1/3) (Inner Parts)
| 21***11 | Pump Ass'Y | 1 |
| UC***23 | Plug | 1 |
| UC***49 | Case | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Pump (Gear Pump) (3/3) (Inner Parts)
| UC***96 | O-Ring | 6 |
| UC***53 | O-Ring | 1 |
| UC***15 | Nut | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Pump (Piston Pump) (2/3) (Inner Parts)
| UC***02 | Retainer | 2 |
| UC***53 | Pin | 6 |
| UC***05 | Ring,Snap | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Valve (Front) (1/3)
| 01***16 | Bolt (Op) | 4 |
| 01***20 | Bolt (Itl) | 8 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 8 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Valve (Front) (2/3)
| 07***20 | O-Ring,(0202-007) | 3 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Valve (Front) (3/3)
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Valve (Rear) (1/3)
| 01***16 | Bolt (Op) | 4 |
| 01***20 | Bolt (Itl) | 8 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 8 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Valve (Rear) (2/3)
| 07***10 | O-Ring,Plate | 2 |
| 07***20 | O-Ring,(0202-007) | 3 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Valve (Rear) (3/3)
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Valve (Upper Valve) (1/2) (Inner Parts)
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 1 |
| 07***07 | Plug,Housing No.2?3?4?5?6 | 1 |
| 21***20 | Valve Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Main Valve (Upper Valve) (2/2) (Inner Parts)
| NA***10 | O-Ring | 1 |
| NA***01 | Ring,Snap | 1 |
| NA***01 | Spring | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : P.P.C. Valve (For Offset Attachment Control)(#10371-)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 70***30 | Ppc Valve, Assembly | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : P.P.C. Valve (For Offset Attachment Control)(#5001-7927)
| 20***51 | Valve Ass'Y,Offset Control | 1 |
| NY***16 | Pin,Split | 2 |
| NY***00 | Shim? 0.2mm | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : P.P.C. Valve (For Offset Attachment Control)(#7928-10370)
| 21***91 | Valve Ass'Y,(See Fig.Y1680-01a1) | 1 |
| NY***00 | Shim? 0.1mm | 6 |
| NY***10 | Pusher | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : P.P.C. Valve (For Work Equipment Control) (L.H.)(#5001-7927)
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
| 07***20 | O-Ring,Relief Valve | 4 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : P.P.C. Valve (For Work Equipment Control) (L.H.)(#7928-)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 07***20 | O-Ring,Relief Valve | 4 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : P.P.C. Valve (For Work Equipment Control) (R.H.)(#5001-7927)
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
| 07***20 | O-Ring,Relief Valve | 4 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : P.P.C. Valve (For Work Equipment Control) (R.H.)(#7928-)
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
| 07***20 | O-Ring,Relief Valve | 4 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Service Kit
| 07***75 | O-Ring,Steering Oil Filter | 1 |
| 07***90 | O-Ring,(Dk029369-0020) (K2) | 1 |
| 07***10 | O-Ring - Strainer Cover | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Swing Motor (1/2)(#5001-7927)
| 04***18 | Ring,Snap (Itl) | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
| 70***20 | Bushing | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Swing Motor (1/2)(#7928-)
| 04***18 | Ring,Snap (Itl) | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
| 70***20 | Bushing | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Swing Motor (2/2)(#5001-7927)
| 07***16 | O-Ring | 1 |
| 07***16 | Ring, Back-Up | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Swing Motor (2/2)(#7928-)
| 07***16 | O-Ring | 1 |
| 07***16 | Ring, Back-Up | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Swivel Joint (Inner Part)(#7928-)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Swivel Joint (Inner Parts)(#5001-7927)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Travel Motor (1/3) (Hydraulic Motor)
| 06***03 | Bearing,Ball | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***40 | Seal, O-Ring | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Travel Motor (1/3) (Hydraulic Motor) (Second Travel Spec.)(#10371-)
| 04***93 | Ball,Steel | 2 |
| 06***03 | Bearing,Ball | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Travel Motor (1/3) (Hydraulic Motor) (Second Travel Spec.)(#5001-10370)
| 04***93 | Ball,Steel | 2 |
| 06***03 | Bearing,Ball | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Travel Motor (2/3) (Brake Valve)
| 01***30 | Screw | 8 |
| 07***16 | O-Ring,Suction And Relief Valve | 2 |
| 07***34 | O-Ring,(Not Used When (B) Spec.) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Travel Motor (2/3) (Brake Valve) (Second Travel Spec.)(#10371-)
| 01***30 | Screw | 8 |
| 07***16 | O-Ring,Suction And Relief Valve | 2 |
| 07***34 | O-Ring,(Not Used When (B) Spec.) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Travel Motor (2/3) (Brake Valve) (Second Travel Spec.)(#5001-10370)
| 01***50 | Bolt | 4 |
| 01***30 | Screw | 8 |
| 07***08 | O-Ring,(Tm8202-005) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Travel Motor (3/3) (Final Drive)
| 04***12 | Ring, Snap (4) | 3 |
| 04***52 | Ball,Detent | 1 |
| 07***07 | O-Ring - (K10) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Travel Motor (3/3) (Final Drive) (Second Travel Spec.)(#10371-)
| 04***12 | Ring, Snap (4) | 3 |
| 04***52 | Ball,Detent | 1 |
| 07***07 | O-Ring - (K10) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Service Kit And Component Parts : Travel Motor (3/3) (Final Drive) (Second Travel Spec.)(#5001-10370)
| 04***12 | Ring, Snap (4) | 3 |
| 04***52 | Ball,Detent | 1 |
| 07***07 | O-Ring - (K10) | 4 |
Swing Circle And Related Parts
Komatsu : Pc75uu-2(S/N 5001-Up) : Swing Circle And Related Parts : Swing Circle
| 01***80 | Bolt,(For Adjustable Rod) | 48 |
| 04***38 | Pin, Dowel | 2 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Swing Circle And Related Parts : Swing Machinery And Motor (Mount And Elbow)(#5001-7927)
| 01***20 | Screw | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Swing Circle And Related Parts : Swing Machinery And Motor (Mount And Elbow)(#7928-)
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 8 |
| 01***00 | Bolt, Mount Back-Up Alarm | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Swing Circle And Related Parts : Swing Machinery And Motor (Swing Machinery)(#5001-7927)
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| 04***38 | Pin, Dowel | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Swing Circle And Related Parts : Swing Machinery And Motor (Swing Machinery)(#7928-)
| 04***12 | Ring, Snap (4) | 6 |
| 07***65 | Seal,Oil Output Shaft | 1 |
| 07***00 | Fitting, Grease (Steering Cylinder) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Swing Circle And Related Parts : Swivel Joint (Mount And Elbow) (Second Travel Spec.)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 4 |
| 01***26 | Washer,Plain | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Swing Circle And Related Parts : Swivel Joint (Mount And Elbow) (Second Travel Spec.) (Without Blade)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 4 |
| 01***26 | Washer,Plain | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Swing Circle And Related Parts : Swivel Joint (Mount And Elbow)(#5001-7927)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 4 |
| 01***26 | Washer,Plain | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Swing Circle And Related Parts : Swivel Joint (Mount And Elbow)(#7928-)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 4 |
| 01***26 | Washer,Plain | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Travel And Lower Piping
Komatsu : Pc75uu-2(S/N 5001-Up) : Travel And Lower Piping : Final Drive (Mount And Elbow)
| 01***40 | Bolt,(With Center Guard) | 24 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 24 |
| 07***34 | O-Ring,(Not Used When (B) Spec.) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Travel And Lower Piping : Final Drive (Mount And Elbow) (Second Trevel Spec.)
| 01***40 | Bolt,(With Center Guard) | 24 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 24 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Travel And Lower Piping : Lower Hydraulic Line (Blade Cylinder Line)
| 07***11 | Hose | 1 |
| 07***13 | Hose | 1 |
| 20***70 | Grommet | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Travel And Lower Piping : Lower Hydraulic Line (Travel Hi Line) (Second Travel Spec.)
| 21***90 | Hose,White | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Travel And Lower Piping : Lower Hydraulic Line (Travel Motor Line)
| 08***19 | Band,(Without Air Conditioner) | 4 |
| 08***23 | Band,(With Water Separator) | 4 |
| 20***40 | Grommet | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Travel And Lower Piping : Sprocket
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 24 |
| 20***30 | Bolt | 24 |
| 21***10 | Sprocket | 2 |
Under Carriage
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Carrier Roller (For Rubber Shoe Or Steel Shoe)(#10371-)
| 01***85 | Bolt,(For Perforated Mask) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 2 |
| 04***15 | Ring, Snap | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Carrier Roller (For Rubber Shoe Or Steel Shoe)(#7928-10370)
| 01***85 | Bolt,(For Perforated Mask) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 2 |
| 04***15 | Ring, Snap | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Carrier Roller (For Rubber Shoe)(#5001-7927)
| 01***85 | Bolt,(For Perforated Mask) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 2 |
| 04***15 | Ring, Snap | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Carrier Roller (For Steel Shoe)(#5001-7927)
| 01***85 | Bolt,(For Perforated Mask) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 2 |
| 04***15 | Ring, Snap | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Front Idler
| 07***38 | Ring, Seal - Between Sections | 2 |
| 07***08 | Plug (Kit) | 1 |
| 14***16 | Floating Seal Ass'Y,(For D60pl) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Idler Cushion
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***70 | Bolt,(With Wear Guard) | 8 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Rubber Shoe(#5001-7927)
| 21***30 | Shoe,Rubber | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Rubber Shoe(#7928-)
| 21***10 | Shoe,Rubber | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Track Frame And Cover
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 16 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Track Roller(#10371-)
| 01***65 | Bolt | 40 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 40 |
| 07***32 | O-Ring,Drain Plug? Main Clutch | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Track Roller(#5001-7927)
| 01***65 | Bolt | 40 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 40 |
| 07***35 | O-Ring,(F4350-61a0 -32 ) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Track Roller(#7928-10370)
| 01***65 | Bolt | 40 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 40 |
| 07***35 | O-Ring,(F4350-61a0 -32 ) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole And Ruber Grouser Type)
| 10***73 | Bushing,Master | 4 |
| 10***71 | Seal,Dust? Regular? W-Type | 148 |
| 10***81 | Seal,Dust? Master? W-Type | 8 |
Work Equipment
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Arm And Pin)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Arm And Pin) (Attachment)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Arm) (Telescopic Arm)
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 8 |
| 01***50 | Bolt,(With Service Valve R.H.) | 8 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 8 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Attachment Piping) (Attachment)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***70 | Bolt, Accumulator Mounting Bracket | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Cover) (Telescopic Arm)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 20 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Pin) (Telescopic Arm)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***60 | Bolt,(Shim Thickness?More Than 8mm) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Piping) (Telescopic Arm)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Safety Equipment) (Telescopic Arm)
| 01***16 | Bolt (With Air Heater & Conditioner) | 3 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Safety Equipment) (Telescopic Arm)(#5001-7927)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 3 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Safety Equipment)(#10371-)
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***25 | Bolt, Seal Cover Mounting | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Safety Equipment)(#5001-7927)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm (Safety Equipment)(#7928-10370)
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm Cylinder
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***10 | O-Ring - Strainer Cover | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm Cylinder (Accessories Parts)
| 07***00 | Fitting, Grease (Steering Cylinder) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Arm Cylinder (Inner Parts) (Mono Boom)(#7075-)
| 01***11 | Nut,(With Under Mirror) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 04***35 | Bowl, Check Valve | 9 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Blade
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 04***12 | Lock,(With Rain Cap) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Blade Cylinder (Cylinder)
| 07***30 | O-Ring, Cover - Transfer Gear | 1 |
| 07***25 | O-Ring,Cylinder Head | 1 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Blade Cylinder (Pin And Cover)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (1st? 2nd Boom? 3rd Bracket And Sub Link)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 4 |
| 07***00 | Fitting, Grease (Steering Cylinder) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (1st? 2nd Boom? 3rd Bracket And Sub Link) (Attachment)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 4 |
| 07***00 | Fitting, Grease (Steering Cylinder) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Attachment Line) (Attachment)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***70 | Bolt, Accumulator Mounting Bracket | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Hydraulic Line)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Hydraulic Line) (Mono Boom)(#7075-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 20 |
| 01***32 | Washer,(With Auto Emergency Steering) | 20 |
| 07***08 | Hose | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Hydraulic Line) (Telescopic Arm)
| 01***05 | Bolt | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Mono Boom)(#10371-)
| 07***00 | Fitting, Grease (Steering Cylinder) | 2 |
| 07***60 | Seal,(Y1620-41a0a-14) | 4 |
| 20***20 | Bracket Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Pin)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 22 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 22 |
| 04***12 | Lock,(With Rain Cap) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Pin) (Mono Boom)(#7075-)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 04***12 | Lock,(With Rain Cap) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Safety Equipment)(#5001-7927)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Safety Equipment)(#7928-)
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Work Lamp And Cover)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom (Work Lamp And Cover) (Mono Boom)(#7075-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom Cylinder
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***11 | Nut,(With Under Mirror) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Boom Cylinder (Inner Parts) (Mono Boom)(#7075-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***11 | Nut,(With Under Mirror) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket Cylinder
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***90 | O-Ring,(Dk029369-0020) (K2) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket Cylinder (For Slide Arm)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 07***90 | O-Ring,(Dk029369-0020) (K2) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket Cylinder (Inner Parts) (Mono Boom)(#7075-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***65 | Bolt | 8 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket Link
| 01***20 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket Pin (For Narrow Width Backet)(#10371-)
| 13***51 | Spacer? 1.6mm | 1 |
| 13***90 | Spacer? 3.2mm | 1 |
| 17***10 | O-Ring,Holder | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket Pin(#10371-)
| 01***60 | Bolt, Tube To Oil Cooler | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 13***51 | Spacer? 1.6mm | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket Pin(#5001-10370)
| 01***60 | Bolt, Tube To Oil Cooler | 4 |
| 01***30 | Bolt | 1 |
| 01***50 | Bolt | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.08m3 (Mini 0.14m3) Width 450mm(#10371-)
| 01***28 | Nut (Std) | 6 |
| 20***40 | Plate (Welded) | 1 |
| 20***50 | Plate (Welded) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.08m3 (Mini 0.14m3) Width 450mm(#5001-10370)
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***00 | Bucket Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.11m3 (Mini 0.18m3) Width 550mm(#10371-)
| 01***28 | Nut (Std) | 6 |
| 20***40 | Plate (Welded) | 1 |
| 20***50 | Plate (Welded) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.11m3 (Mini 0.18m3) Width 550mm(#5001-10370)
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***10 | Bucket Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.18m3 (Mini 0.30m3) Width 650mm (Telescopic Arm)(#10371-)
| 01***28 | Nut (Std) | 6 |
| 20***71 | Side Cutter,L.H | 1 |
| 20***81 | Side Cutter,R.H | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.18m3 (Mini 0.30m3) Width 650mm (Telescopic Arm)(#5001-10370)
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***30 | Plate,R.H. (Welded) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.25m3 (Mini 0.44m3) Width 750mm (Horizontal Pin Type)(#10371-)
| 01***28 | Nut (Std) | 6 |
| 20***90 | Bucket Ass'Y | 1 |
| 20***61 | Plate (Welded) | 2 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.25m3 (Mini 0.44m3) Width 750mm (Horizontal Pin Type)(#5001-10370)
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***60 | Bucket Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.25m3 (Mini 0.44m3) Width 750mm(#10371-)
| 01***28 | Nut (Std) | 6 |
| 20***60 | Bucket Ass'Y | 1 |
| 20***11 | Bucket,(650mm) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.25m3 (Mini 0.44m3) Width 750mm(#5001-10370)
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***40 | Bucket Ass'Y | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.30m3 (Mini 0.50m3) Width 760mm(#10371-)
| 20***61 | Plate (Welded) | 2 |
| 20***12 | Pin | 4 |
| 20***20 | Pin | 4 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Bucket? 0.30m3 (Mini 0.50m3) Width 760mm(#5001-10370)
| 20***80 | Plate (Welded) | 2 |
| 20***22 | Bucket Ass'Y | 1 |
| 20***10 | Bucket,(760mm) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Long Arm (Arm And Pin)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Long Arm (Hose)
| 08***23 | Tie, Cable | 2 |
| 20***30 | Cover | 2 |
| 20***30 | Wire | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Offset Cylinder
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***29 | Nut - Front Axle Mounting | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Pc75uu-2(S/N 5001-Up) : Work Equipment : Slide Arm Cylinder
| 01***22 | Nut,(North America Spec.) | 1 |
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
PC75UU-2(S/N 5001-UP) serial number reference
The PIN/serial plate on this class of Komatsu compact excavator sits on the upper (revolving) frame near the boom foot, with the public stamping typically visible on a flat surface at the front of the machine between the arm linkages; the number is often restamped on the frame itself as a backup. Because this serial block predates Komatsu's export ISO-PIN format, the plate shows only the model designation and a plain numeric serial with no 3-letter prefix - read it as the model name followed by the number, and match that number against the shop/parts manual serial breaks to pin an approximate build date.
| Prefix | Identifies | Notes |
|---|---|---|
| 5001-UP (no 3-letter alpha prefix) | Standard zero-tail-swing production block | Predates Komatsu's 17-character ISO PIN system; the chassis number is a plain numeric sequence with no 3-letter model-family code. Fitted with the naturally aspirated 4D95L-1 diesel, confirmed across the factory shop manual and parts documentation issued for this exact serial range. |
| ~8300 | Same standard configuration, early build | A unit in this range is documented as a 1994-built machine with the 4D95L-1 engine. Anecdotal service/ownership references only, not an OEM date-of-manufacture record; confirm exact year with your dealer. |
| ~10000 | Same standard configuration, mid build | A unit in this range is documented as a 1995-built machine. Single data-point reference only, not an OEM date-of-manufacture record; confirm exact year with your dealer. |
| 18001-24521 | Mid-production parts specification break | Parts documentation shows a component change starting at this serial break; calendar year not documented. Confirm with dealer. |
| 26423-UP | Late-production parts specification break | Parts documentation shows a further component change from this serial point forward; calendar year not documented. Confirm with dealer. |
Frequently asked questions
What engine does the Komatsu PC75UU-2 (S/N 5001-Up) use?
A Komatsu 4D95L-1: naturally aspirated, 4-cylinder diesel, about 3.26 L, roughly 41 kW (55 HP) gross, mechanically governed with no electronic engine control or fault-code system.
What is the operating weight of the Komatsu PC75UU-2 (S/N 5001-Up)?
About 7,490-7,600 kg (16,510-16,750 lb), varying by undercarriage, boom, and blade configuration.
What replaced the Komatsu PC75UU-2?
The Komatsu PC75UU-3 (S/N 15001-Up) replaced it, keeping the same near-zero-tail-swing offset-boom layout but moving to the higher-output 4D95LE engine family.
What PC75UU-2(S/N 5001-UP) owners discuss
What's the reputation of the 4D95L-1 engine in the PC75UU-2, and what quirks show up with age?
The naturally aspirated 4D95L-1 is generally regarded as tough and simple to keep running: no ECM strategy to fight, no aftertreatment, and a well-kept unit restarts easily even after sitting. The recurring complaint on higher-hour machines is black smoke under load, most often traced to injection pump timing drifting late or a stuck-open injector rather than a bad block; a shop resets timing by pulling the delivery valve spring and hand-pumping until flow stops at the mark. Slow cranking right after a battery swap usually points to a dragging starter armature (sparking or smoking at the rear of the starter housing), not the battery itself. Rebuilt or low-hour replacement 4D95L-1 engines turn up often on used machines, since the block tends to outlast the rest of the carrier.
Why does the machine lose power or nearly stall pushing forward uphill or blading, when it digs fine on flat ground?
This is a repeated complaint and usually isn't an engine fault. The travel system has a high-speed/low-torque mode and a low-speed/high-torque mode, and the reported pattern is the machine bogging and nearly stalling in high range under any real resistance (climbing a grade, blading with the dozer blade); dropping to low-speed/high-torque cures it, since high-speed travel isn't meant to be used against load. A second reported cause is a worn seal in the center swivel joint that lets oil cross from the forward path into the reverse path under load, so the machine is effectively fighting itself while trying to move. Because unexpected torque loss on a grade is a rollback risk, have your dealer verify swivel-joint condition and travel shock-valve settings before relying on the machine on slopes.
The boom won't come down even though every other function works. What's going on?
Reported on more than one machine: every other function works normally but the boom won't lower, and the pump doesn't even load up when the lower lever is pulled, which points to the pilot signal or a stuck spool rather than the main pump. The usual fix is pulling the boom-lower valve core and cleaning it, since debris or varnish in aged hydraulic oil can stick a spool in the blocked position. Dirty or degraded fluid is the common root cause. Because a boom that won't lower, or one that drops suddenly once freed, is a crush hazard, have your dealer verify the load-holding and pilot circuit before returning the machine to work.
Why does the swing bind or lock up once engine RPM comes up, even though it swings fine at idle?
Several owners describe the same pattern: the house swings smoothly at idle but drags or locks as revs increase. The swing brake on this class of machine releases on pilot pressure, so the working theory is that raising RPM lets a relief valve open or lets the pump momentarily cavitate, dropping pilot pressure enough for the brake to reapply. Overheated hydraulic oil raising case-drain flow through the swing motor is the other reported trigger, since the swing circuit is designed to cut power and protect the motor once oil temperature climbs too high. Because an unexpected swing lockup with a load or attachment overhead is a crush hazard, have your dealer verify swing pilot pressure and motor case-drain flow rather than chasing the symptom by feel.
What electrical gremlins are typical on these older PC75UU-2 machines?
The 24V start circuit is the recurring headache. Reported symptoms include the engine dying the instant the key goes to off while accessories (lights, wiper, horn, fan) keep running, and the starter refusing to re-engage on the next attempt, traced back to the battery relay/start-circuit protection, which on this era of small Komatsu carrier is a simple diode mounted under the seat rather than a smart module. A warning indicator on the monitor panel tied to a weak or non-charging battery has also come up, usually resolved by checking alternator output and the battery isolator or earth straps rather than replacing the panel. Aftermarket accessories (radios, cab heaters) spliced into the harness are a common source of the same symptoms, so rule those out first. This generation predates full engine self-diagnostics, so expect only basic charge and oil-pressure warning lights on the monitor, not a fault-code list.
What wear patterns show up on the undercarriage and offset boom as hours climb?
Steel-track derailment on side-slopes is a repeated complaint, usually tension that reads fine on paper but a roller flange or retaining lip worn down far enough that it no longer holds the chain, often combined with a stretched chain on one side. Bottom rollers wearing on an angle get called out as a cause of the track riding improperly rather than just a symptom of it. On the offset/knuckle boom itself, play in the articulating joint pins and bushings has been reported showing up by roughly 3,000 hours if a prior owner was inconsistent about greasing. Separately, the main structural pins and bushings connecting boom, stick, and bucket wear enough by higher hours that some of that wear ends up in the non-replaceable casting bores rather than just the serviceable pins.
What should I check before buying a used PC75UU-2?
Run every function instead of just eyeballing it: boom, stick, bucket, offset/knuckle, swing, and both travel directions, watching for sluggish response, jerky movement, or whining from the pump, and check hoses and cylinders for weeping. Grab the bucket and rock it side to side to feel pin and bushing play in the stick and boom, and check the offset-boom knuckle joint the same way. Walk the undercarriage looking for uneven wear, loose chains, cracked rollers, and worn sprockets; steel-track machines on this model are prone to throwing a track on slopes once roller flanges wear down. Rotate the house through a full swing and listen for grinding or a brake that grabs as RPM comes up. Start the engine cold if possible and watch for hard starting, smoke color under load, and any warning light that won't clear; ask when the engine was last rebuilt or replaced, since a newer 4D95L-1 swapped into an older carrier is common and worth confirming with paperwork. Given how expensive hydraulic and undercarriage repairs get on this class of machine, budget for at least one of the above needing attention even on a clean-looking unit.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific PC75UU-2(S/N 5001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.