Komatsuhydraulic excavatorsmall ( - pc90)
Komatsu PC60-5(S/N 20501-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu PC60-5 is a 6-ton class crawler hydraulic excavator produced from 1987 to 1997. It is powered by the Komatsu 4D95L-1K diesel engine, delivering approximately 60 horsepower. The machine features a standard operating weight of 6,300 kg and is available in standard (PC60-5), long-undercarriage (PC60L-5), and ultra-compact (PC60U-5) configurations. It succeeded the PC60-3 series and was followed by the PC60-6 and PC60-7 generations. The PC60-5 was designed for general construction, utility work, and landscaping, offering a maximum digging depth of 4.06 meters and a bucket capacity of 0.27 cubic meters.
The PC60-5 remains a critical asset in the used and parts market due to its mechanical simplicity and widespread deployment during the late 1980s and 1990s. Unlike later electronic generations, the PC60-5 relies on robust mechanical fuel injection and hydraulic systems, making it easier and cheaper to repair in remote or resource-limited environments. Its enduring popularity stems from the availability of aftermarket parts for the 4D95L engine and the machine's ability to operate effectively in confined spaces, particularly the PC60U-5 variant. As these units age, the market for reliable used machines and replacement undercarriage components remains strong.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu PC60-5(S/N 20501-UP) specifications
Engine
| Model | 4D95L |
| Gross Power | 40.5 kW (54 HP) @ 2100 rpm |
| Rated Power | 44–45 kW (60 HP) @ 2200 rpm |
| Displacement | Not documented for this exact serial range — verify with your dealer |
| Cylinders | 4 |
| Emissions Tier | Not documented for this exact serial range — verify with your dealer |
Weights
| Operating Weight | 6,300 kg (13,889 lb) |
| Ground Pressure | Not documented for this exact serial range — verify with your dealer |
| Transport Weight | Not documented for this exact serial range — verify with your dealer |
Dimensions
| Transport Length | 6,000 mm (19 ft 8 in) |
| Transport Width | 2,150–2,290 mm (7 ft 1 in – 7 ft 6 in) |
| Transport Height | 2,520–2,620 mm (8 ft 3 in – 8 ft 7 in) |
| Tail Swing Radius | Not documented for this exact serial range — verify with your dealer |
| Track Shoe Width | 610 mm (24 in) |
| Ground Clearance | Not documented for this exact serial range — verify with your dealer |
| Undercarriage Length | Not documented for this exact serial range — verify with your dealer |
Performance
| Max Dig Depth | 3,400–4,060 mm (11 ft 2 in – 13 ft 4 in) |
| Max Reach at Ground | 5,900–6,230 mm (19 ft 4 in – 20 ft 5 in) |
| Max Dump Height | Not documented for this exact serial range — verify with your dealer |
| Max Cutting Height | Not documented for this exact serial range — verify with your dealer |
| Swing Speed | 11–12 rpm |
| Travel Speed | 4.2 km/h (2.6 mph) |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
| Drawbar Pull | Not documented for this exact serial range — verify with your dealer |
Forces
| Bucket Digging Force | Not documented for this exact serial range — verify with your dealer |
| Stick/Arm Digging Force | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel Tank | 95 L (25.1 gal) |
| Hydraulic System/Tank | Not documented for this exact serial range — verify with your dealer |
| Engine Oil | Not documented for this exact serial range — verify with your dealer |
| Cooling System | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Komatsu PC60-5(S/N 20501-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 5,000 h |
|
Servicing the PC60-5(S/N 20501-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor hydraulic oil viscosity and contamination levels at every 500-hour interval to prevent pump wear. Check coolant pH and glycol concentration annually to avoid corrosion in the 4D95L-1K engine block. Inspect the fuel water separator daily; water accumulation causes injector failure in this mechanical injection system. Track swing bearing grease condition for signs of metal particulate, indicating early gear wear. Use Komatsu EO or equivalent high-quality hydraulic fluid to maintain system cleanliness and prevent valve sticking.
Corrective & Common Repairs
Address hydraulic hose leaks promptly, as the PC60-5’s high-pressure lines are prone to abrasion against the boom structure. Replace the fuel pre-filter and main fuel filter at 250-hour intervals to protect the 4D95L-1K injection pump. Inspect the radiator and oil cooler fins for debris buildup, which causes overheating during heavy digging cycles. Check track tension weekly; excessive sag accelerates lower roller and sprocket wear. Replace worn track pads to maintain ground pressure and stability on soft terrain.
Overhaul & Rebuild Points
Plan for major hydraulic pump overhaul around 10,000 to 15,000 hours, depending on load factors. Inspect the swing motor and final drive gears for pitting or backlash at 5,000-hour intervals. The 4D95L-1K engine typically requires valve clearance adjustment every 1,000 hours and a full overhaul near 12,000 hours. Check the boom and stick welds for stress cracks, especially near the cylinder mounting points. Replace the entire undercarriage group when link pitch elongation exceeds 3 percent.
Seasonal & Environment Servicing
In cold weather, drain the fuel water separator before each start to prevent waxing. Use low-temperature hydraulic fluid to ensure smooth valve operation below freezing. In dusty environments, check the air filter restriction indicator every 10 hours and clean the outer element daily. Inspect the radiator screen for insect or chaff buildup in agricultural settings. Ensure the cooling system is flushed and refilled with fresh coolant every 2,000 hours to maintain thermal efficiency in high-ambient conditions.
PC60-5(S/N 20501-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| 07000-02135 | O-Ring,Hydraulic Oil Filter | Hydraulic service | Check fitment → |
| 6204-61-5190 | Gasket,Oil Cooler Element | Lubrication service | Check fitment → |
| 600-211-6240 | Cartridge,Engine Oil Filter (D31s) | Lubrication service | Check fitment → |
| 600-181-7300 | Element Ass'Y,Outer | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PC60-5(S/N 20501-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E10 | Engine controller power failure | ECM power connection fault, blown fuse, or ground wire issue | Inspect ECM power connections, fuses, and ground wires |
| E11 | Engine protection—output power reduced | High coolant temperature, low oil pressure, or clogged air filter | Check coolant temperature, oil pressure, and air filter condition |
| E02 | PC-EPC system fault | Failure in the proportional pressure control solenoid drive circuit | Inspect EPC solenoid valve wiring and connectors for damage |
| E03 | Swing parking brake system fault | Swing parking brake solenoid valve circuit short or open | Check swing parking brake solenoid valve circuit continuity |
| E202 | LS select solenoid valve circuit short circuit | Electrical short in the load sensing select solenoid valve circuit | Inspect LS select solenoid valve wiring for chafing or shorts |
| E204 | Pump confluence/diversion solenoid valve circuit short | Electrical short in the main pump flow control solenoid | Check pump confluence solenoid valve circuit for shorts |
| E227 | Abnormal engine speed sensor | Faulty crankshaft speed sensor or damaged sensor wiring | Replace the engine speed sensor and verify voltage at the connector |
| E316 | Governor motor out of adjustment | Mechanical misalignment or calibration drift in the engine governor motor | Adjust or replace the governor motor assembly |
| E317 | Governor motor circuit open | Broken wire or disconnected plug in the governor motor circuit | Trace and repair the open circuit in the governor motor wiring |
| E318 | Governor motor circuit short circuit | Short to ground or power in the governor motor wiring harness | Inspect governor motor wiring harness for short circuits |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PC60-5(S/N 20501-UP) attachments & work tools
Buckets
Standard configurations for the PC60-5 (S/N 20501-UP) include a general digging capacity of 0.27 m³ (0.35 yd³) with a width of 0.825 m (2.7 ft), and a long-reach variant capacity of 0.36 m³ (0.47 yd³). The PC60U-5 variant typically utilizes a 0.28 m³ (0.37 yd³) bucket. Pin-on mounting is the standard factory configuration for this serial range, though aftermarket quick couplers are available for the class.
Hydraulic hammers
The PC60-5 (6.3-ton class) is compatible with hydraulic breakers in the 1,000–1,800 kg (2,200–4,000 lb) weight class. Typical breaker models for this size class include the Montabert H16, Atlas Copco HB29, or equivalent 1.5-ton class hammers. These tools require auxiliary hydraulic flow and pressure ratings that must be verified against the specific machine's pump output.
Quick couplers
Aftermarket quick couplers for the PC60-5 (S/N 20501-UP) are generally designed to match the stick pin diameter and width of the standard boom assembly. Mechanical and hydraulic coupler types are available, but the specific pin diameter and width must be confirmed against the stick end geometry, as dimensions vary by configuration/series.
Thumbs/grapples
Hydraulic thumbs and grapples for the PC60-5 are typically mounted to the stick using the standard bucket cylinder pin holes or a dedicated bracket. Attachment compatibility depends on the stick width and pin diameter, which vary by configuration/series; factory specifications should be consulted for exact mounting hardware requirements.
Rippers
Single or multi-shank rippers are available for the PC60-5 (S/N 20501-UP) to replace the bucket for rock breaking or soil stabilization. The ripper mounting interface must match the stick pin diameter and width, which vary by configuration/series. Hydraulic flow requirements for ripper operation should be verified against the machine's auxiliary circuit capacity.
Hydraulic-kit notes
The PC60-5 (S/N 20501-UP) is powered by the Komatsu 4D95L-1K engine. Auxiliary hydraulic circuits for attachments such as hammers or thumbs require verification of flow rate and pressure ratings from the operation and maintenance manual. Standard fluid specifications include Komatsu EO or TO hydraulic oil for the system.
All PC60-5(S/N 20501-UP) assemblies by section
Every catalogued assembly group for the Komatsu PC60-5(S/N 20501-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
4d95l-1k Engine S/N 15548-Up
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Air Cleaner
| 04***10 | Ring,See Fig. K4010-65a0 | 1 |
| 09***61 | Plate? Instruction,(Japanese-English) | 1 |
| 60***00 | Element Ass'Y,Outer | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Air Intake Manifold And Connection(#15548-30888)
| 01***65 | Stud | 1 |
| 01***12 | Bolt | 2 |
| 01***20 | Bolt,(For Japan Pc200) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Air Intake Manifold And Connection(#30889-)
| 01***65 | Stud | 1 |
| 01***12 | Bolt,(With Speedometer) | 4 |
| 01***12 | Bolt | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Alternator (15a)
| 60***70 | Alternator A. (15a),(See Fig.0641) | 1 |
| KD***70 | Cover | 1 |
| KD***30 | Retainer | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Alternator (25a)
| 60***20 | Alternator A. (25a),(With Non Hardening Pulley) | 1 |
| KD***57 | Bearing,Ball? Front | 1 |
| KD***70 | Bracket,Front | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Alternator And Mounting (For 15a Alternator)
| 01***25 | Bolt,(With Corrosion Resistor) | 4 |
| 01***50 | Bolt,(With Corrosion Resistor) | 1 |
| 01***95 | Bolt | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Alternator And Mounting (For 25a Alternator)
| 01***35 | Bolt,(Cold Weather Spec.) | 1 |
| 01***25 | Bolt,(With Corrosion Resistor) | 3 |
| 01***60 | Screw | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Camshaft And Tappet
| 01***20 | Screw | 2 |
| 04***16 | Fitting Wedge | 1 |
| 62***01 | Camshaft Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Crankshaft
| 61***20 | Bolt | 1 |
| 62***00 | Main Metal Ass'Y | 5 |
| 62***00 | Thrust Metal Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Cylinder Block
| 01***55 | Bolt, Mount Tube To Switch Pump | 8 |
| 01***14 | Bolt | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Cylinder Head
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 4 |
| 02***04 | Plug, Pipe | 1 |
| 07***08 | Plug, Expansion | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Cylinder Head Cover
| 61***10 | Cap, Oil Filler | 1 |
| 61***20 | Screw | 3 |
| 61***30 | Washer,(B) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Exhaust Manifold And Muffler
| 01***25 | Grub Screw | 3 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
| 01***45 | Bolt, Bracket Mounting | 7 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Flywheel And Flywheel Housing
| 01***55 | Bolt, Mount Lh Bracket | 8 |
| 01***30 | Bolt | 6 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 11 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Front Cover And Gear
| 01***70 | Bolt,(For 75a Alternator) | 1 |
| 01***16 | Bolt | 2 |
| 01***16 | Screw | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Fuel Filter And Piping
| 01***65 | Bolt,(With Water Separator) | 2 |
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
| 07***12 | Gasket,(Without Air Compressor Type) (K1) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Fuel Injection Pump (Feed Pump)
| DK***20 | Bolt, Joint | 1 |
| DK***00 | Valve,Check | 2 |
| DK***20 | Pump,Priming | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Fuel Injection Pump (Governor) (1/2)
| DK***00 | Adapter | 1 |
| DK***00 | Nut,Lock | 1 |
| DK***00 | Housing | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Fuel Injection Pump (Governor) (2/2)
| DK***40 | Gasket,Air Compressor | 2 |
| DK***20 | Capsule,Spring | 1 |
| DK***00 | Nut,Cap | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Fuel Injection Pump (Pump)
| 62***20 | Injection Pump A | 1 |
| DK***40 | Shim? 0.50mm, Shim, 0.50mm; Was Dk029311-0040 | 0 |
| DK***30 | Bearing | 0 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Fuel Injection Pump And Piping
| 01***35 | Stud | 4 |
| 01***12 | Bolt | 2 |
| 01***25 | Screw | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Fuel Nozzle And Spill Pipe
| 01***35 | Bolt, Mount Bracket To Floor | 4 |
| 07***10 | Tube,(See Fig.0421-14) | 3 |
| 07***29 | Tube,Spill | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Gasket Kit
| 01***12 | Washer,Lock (Noise Suppression Spec.) (K2) | 1 |
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 1 |
| 07***20 | O-Ring,Relief Valve | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Lubricating Oil Cooler
| 01***25 | Bolt,(With Corrosion Resistor) | 4 |
| 01***30 | Bolt,(Water Separator Spec.) | 7 |
| 01***50 | Bolt,(With Corrosion Resistor) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Lubricating Oil Filter
| 60***40 | Cartridge,Engine Oil Filter (D31s) | 1 |
| 62***10 | Nipple | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Lubricating Oil Pump And Suction Pipe
| 01***12 | Bolt,(See Fig.0501) | 1 |
| 01***16 | Screw | 6 |
| 62***00 | Oil Pump Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Oil Pan
| 01***14 | Bolt | 24 |
| 62***11 | Pan,Oil | 1 |
| 62***90 | Plug,Drain | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Piston And Connecting Rod
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Power Take Off
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Rocker Arm
| 01***12 | Bolt,(Without R.P.C.U.) | 1 |
| 01***65 | Bolt,(For Alternator Bracket Mount) | 5 |
| 61***30 | Nut | 8 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Starting Motor (2.8kw)
| 60***30 | Starting Motor Ass'Y,(2.8kw) | 1 |
| KD***01 | Washer,Seal | 2 |
| KD***42 | Screw | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Starting Motor And Mounting
| 01***30 | Bolt | 2 |
| 07***95 | O-Ring,Transmission Strainer | 1 |
| (6***0) | Starting Motor Ass'Y,(2.8kw) (See Fig.0661) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : 4d95l-1k Engine S/N 15548-Up : Water Pump And Cooling Fan
| 01***16 | Screw | 5 |
| 01***20 | Screw | 2 |
| 01***40 | Screw | 3 |
Control System
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Fuel Control (With Auto Deceleration) (With Mode Selector Olss) (Except Japan)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Fuel Control Lever
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Fuel Control Linkage (With Auto Deceleration) (With Mode Selector Olss)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Special Work Equipment Control Lever Group (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Special Work Equipment Control Lever Group (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Special Work Equipment Control Linkage (1/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 16 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Special Work Equipment Control Linkage (2/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Special Work Equipment Control Linkage (3/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Special Work Equipment Control Rod Group
| 01***30 | Bolt,(For Mechanical Governor) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Special Work Equipment Control Stand (1/2)
| 01***40 | Bolt,(With Air Conditioner) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Special Work Equipment Control Stand (2/2)
| 01***40 | Bolt,(With Air Conditioner) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Travel Control Lever And Pedal
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Travel Control Linkage (1/2)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Travel Control Linkage (2/2)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 2 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Work Equipment Control Linkage
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Work Equipment Control Linkage (For Arm? Swing) (1/2) (Except Japan)
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Work Equipment Control Linkage (For Arm? Swing) (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 16 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Work Equipment Control Linkage (For Boom? Bucket) (1/2)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Work Equipment Control Linkage (For Boom? Bucket) (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : Control System : Work Equipment Control Stand
| 01***40 | Bolt,(With Air Conditioner) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
Engine Related Parts And Electrical System
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Air Cleaner Connection
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Battery And Relay Switch
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Cigar Lighter
| 01***10 | Screw,(For Lighter) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 2 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Electrical System (Except Japan)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 11 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Electrical System (With Auto Deceleration) (With Mode Selector Olss)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 12 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Engine Mounting Parts
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Fuel Piping
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (1/3) (Radio-Less) (Without Swing Mechanical Brake) (Except Japan)
| 01***06 | Screw | 2 |
| 01***05 | Washer,(Without Window Washer) | 2 |
| 08***01 | Meter,Service | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (1/3) (With Auto Deceleration) (For Mode Selector Olss) (Except Japan)
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (1/3)(#20501-23219)
| 01***06 | Screw | 2 |
| 01***05 | Washer,(Without Window Washer) | 2 |
| 08***01 | Meter,Service | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (1/3)(#23220-)
| 01***06 | Screw | 2 |
| 01***05 | Washer,(Without Window Washer) | 2 |
| 08***01 | Meter,Service | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (2/3)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (2/3) (Radio-Less) (Without Swing Mechanical Brake) (Except Japan)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (2/3) (With Auto Deceleration) (For Mode Selector Olss) (Except Japan)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (3/3)
| 01***16 | Bolt (With Air Heater & Conditioner) | 10 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 10 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (3/3) (Radio-Less) (Without Swing Mechanical Brake) (Except Japan)
| 01***16 | Bolt (With Air Heater & Conditioner) | 10 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***10 | Screw,(For Lighter) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Instrument Panel (3/3) (With Auto Deceleration) (For Mode Selector Olss) (Except Japan)
| 01***16 | Bolt (With Air Heater & Conditioner) | 10 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 10 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Radiator And Oil Cooler
| 01***16 | Bolt (With Air Heater & Conditioner) | 20 |
| 01***16 | Screw | 14 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 20 |
Komatsu : Pc60-5(S/N 20501-Up) : Engine Related Parts And Electrical System : Radiator Mount And Piping
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 8 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Hydraulic System
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Control Valve? L.H. (1/3)
| 01***16 | Bolt (Op) | 20 |
| 07***15 | O-Ring,(Without Boom Kickout) | 1 |
| 07***03 | O-Ring | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Control Valve? L.H. (2/3)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 07***10 | O-Ring,Plate | 4 |
| 07***20 | O-Ring,(0202-007) | 5 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Control Valve? L.H. (3/3)
| 01***11 | Nut - Mounting | 1 |
| 07***11 | O-Ring (Kit) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Control Valve? R.H. (1/3)
| 01***16 | Bolt (Op) | 16 |
| 07***15 | O-Ring,(Without Boom Kickout) | 1 |
| 07***03 | O-Ring | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Control Valve? R.H. (2/3)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 07***10 | O-Ring,Plate | 3 |
| 07***20 | O-Ring,(0202-007) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Control Valve? R.H. (3/3)
| 01***11 | Nut - Mounting | 1 |
| 07***11 | O-Ring (Kit) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Cut Off And Negative Control Valve? Front (Except Japan)
| 01***16 | Bolt (Op) | 8 |
| 70***31 | Pump Assembly; Hydraulic (Hpv35 + 35) - Was 708-21-01031, Pump Assembly; Hydraulic (Hpv 35+35) - Was 708-21-01031, Pump Ass'Y,(Hpv 35+35) | 1 |
| 70***10 | Valve Assembly; Servo - Front - Was 708-21-07110, Servo Valve Ass'Y,Front | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Cut Off And Negative Control Valve? Rear (Except Japan)
| 01***16 | Bolt (Op) | 8 |
| 70***31 | Pump Assembly; Hydraulic (Hpv35 + 35) - Was 708-21-01031, Pump Assembly; Hydraulic (Hpv 35+35) - Was 708-21-01031, Pump Ass'Y,(Hpv 35+35) | 1 |
| 70***10 | Servo Valve Ass'Y,Rear, Valve Assembly; Servo Rear - Was 708-21-07210, Valve Assembly; Servo - Rear - Was 708-21-07210 | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Gear Pump
| 70***01 | Gear Pump Ass'Y; Gear (Bar 16) - Komatsu S/N 20501-22000 - Was 704-24-24401, Gear Pump Ass'Y; Komatsu S/N 20501 & Abv - Was 704-24-24401, Gear Pump Ass'Y,(Bar-16) | 1 |
| 70***50 | Strainer | 1 |
| 70***51 | Strainer, Strainer; Komatsu S/N 22001 & Abv. - Was 704-28-02751 | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Gear Pump (Except Japan)
| 70***01 | Gear Pump Ass'Y; Gear (Bar 16) - Komatsu S/N 20501-22000 - Was 704-24-24401, Gear Pump Ass'Y; Komatsu S/N 20501 & Abv - Was 704-24-24401, Gear Pump Ass'Y,(Bar-16) | 1 |
| 70***50 | Strainer | 1 |
| 70***51 | Strainer, Strainer; Komatsu S/N 22001 & Abv. - Was 704-28-02751 | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Oil And Fuel Tank (1/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***16 | Screw, Mount Parking Lights | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Oil And Fuel Tank (2/2)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
| 01***32 | Washer,(With Auto Emergency Steering) | 5 |
| 07***85 | O-Ring,(Without Fuel Level Gauge) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Arm Cylinder Line)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***34 | O-Ring,(For Without Brake Assistor) | 8 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Boom Cylinder Line)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***65 | Bolt,(Except Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Bucket Cylinder Line)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 6 |
| 01***50 | Bolt,(For Strengthened Cover) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Drain)
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 2 |
| 07***02 | Tube | 1 |
| 07***06 | Tube | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Pump To Valve)
| 01***30 | Bolt,(For Mechanical Governor) | 16 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Return)
| 07***34 | O-Ring,(Not Used When (B) Spec.) | 1 |
| 07***34 | O-Ring, At Transmission Filter | 1 |
| 07***05 | Hose, Filter To Transmission | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Swivel Joint To/From Travel Motor)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***10 | Bolt, Fan Mounting | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Tank To Pump)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Valve To Tank And Oil Cooler)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Valve To/From Swing Motor) (With Swing Mechanical Brake)
| 01***45 | Bolt, Mount Center Hinge Retainer (Upper) | 2 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 2 |
| 07***95 | O-Ring,Transmission Strainer | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Valve To/From Swing Motor) (Without Swing Mechanical Brake)
| 01***45 | Bolt, Mount Center Hinge Retainer (Upper) | 2 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 2 |
| 07***95 | O-Ring,Transmission Strainer | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Piping (Valve To/From Swivel Joint)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 4 |
| 01***26 | Washer,Plain | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump Unit
| 01***80 | Bolt, Mount Strainer Flange | 3 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 3 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump Unit (Except Japan)
| 01***80 | Bolt, Mount Strainer Flange | 3 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 8 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? End Cap
| 01***40 | Bolt,(For Position Fixing) | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 2 |
| 07***21 | O-Ring,Water Piping | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? End Cap (Except Japan)
| 01***40 | Bolt,(For Position Fixing) | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 2 |
| 07***21 | O-Ring,Water Piping | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? Front (1/2)
| 01***16 | Bolt (Welded) | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
| 07***55 | O-Ring,Front Accessory Drive | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? Front (1/2) (Except Japan)
| 01***16 | Bolt (Welded) | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
| 07***55 | O-Ring,Front Accessory Drive | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? Front (2/2)
| 01***30 | Bolt,(Cold Terrain Spec.) | 6 |
| 01***35 | Bolt,(Without Auto Priming System) | 6 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? Front (2/2) (Except Japan)
| 01***30 | Bolt,(Cold Terrain Spec.) | 6 |
| 01***35 | Bolt,(Without Auto Priming System) | 6 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? Rear (1/2)
| 07***23 | O-Ring,(F4350-68a0 -13 ) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 07***12 | Plug,Magnetic | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? Rear (1/2) (Except Japan)
| 07***23 | O-Ring,(F4350-68a0 -13 ) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 07***12 | Plug,Magnetic | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? Rear (2/2)
| 01***30 | Bolt,(Cold Terrain Spec.) | 6 |
| 01***35 | Bolt,(Without Auto Priming System) | 6 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Hydraulic Pump? Rear (2/2) (Except Japan)
| 01***30 | Bolt,(Cold Terrain Spec.) | 6 |
| 01***35 | Bolt,(Without Auto Priming System) | 6 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Relief Valve
| 01***08 | Nut (Op) | 1 |
| 07***10 | O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010 | 1 |
| 07***11 | O-Ring (Kit) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Relief Valve (Except Japan)
| 01***08 | Nut (Op) | 1 |
| 07***10 | O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010 | 1 |
| 07***11 | O-Ring (Kit) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Servo Valve? Front
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Servo Valve? Front (1/2) (Except Japan)
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
| 07***11 | O-Ring (Kit) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Servo Valve? Front (2/2) (Except Japan)
| 01***16 | Bolt (Op) | 6 |
| 70***31 | Pump Assembly; Hydraulic (Hpv35 + 35) - Was 708-21-01031, Pump Assembly; Hydraulic (Hpv 35+35) - Was 708-21-01031, Pump Ass'Y,(Hpv 35+35) | 1 |
| 70***10 | Valve Assembly; Servo - Front - Was 708-21-07110, Servo Valve Ass'Y,Front | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Servo Valve? Rear
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Servo Valve? Rear (1/2) (Except Japan)
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 07***11 | O-Ring (Kit) | 2 |
| 07***48 | O-Ring,(F4350-64a0 -21 ) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Servo Valve? Rear (2/2) (Except Japan)
| 01***16 | Bolt (Op) | 6 |
| 70***31 | Pump Assembly; Hydraulic (Hpv35 + 35) - Was 708-21-01031, Pump Assembly; Hydraulic (Hpv 35+35) - Was 708-21-01031, Pump Ass'Y,(Hpv 35+35) | 1 |
| 70***10 | Servo Valve Ass'Y,Rear, Valve Assembly; Servo Rear - Was 708-21-07210, Valve Assembly; Servo - Rear - Was 708-21-07210 | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Swing Motor (With Swing Mechanical Brake)(#20501-.)
| 04***25 | Ring,Snap | 1 |
| 07***16 | O-Ring | 1 |
| 07***16 | Ring, Back-Up | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Swing Motor (Without Swing Mechanical Brake) (Except Japan)
| 04***25 | Ring,Snap | 1 |
| 07***16 | O-Ring | 2 |
| 07***16 | Ring, Back-Up | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Swivel Joint
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Torque Variable Control Valve (Except Japan)
| 07***16 | O-Ring,Water Pump | 1 |
| 70***31 | Pump Assembly; Hydraulic (Hpv35 + 35) - Was 708-21-01031, Pump Assembly; Hydraulic (Hpv 35+35) - Was 708-21-01031, Pump Ass'Y,(Hpv 35+35) | 1 |
| 70***10 | Valve Assembly; Servo - Front - Was 708-21-07110, Servo Valve Ass'Y,Front | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Travel Motor (1/2)
| 01***30 | Screw | 6 |
| 06***03 | Bearing,Ball | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Hydraulic System : Travel Motor (2/2)
| 04***12 | Ring, Snap (4) | 3 |
| 07***06 | O-Ring,(Not Shown) | 2 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
Mark Plate? Tool And Kit
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Bag And Tables
| 09***13 | Bag,Tool | 1 |
| 09***00 | Box,Spare Parts (Except Usa) | 1 |
| 20***10 | Table,Tool (For Japan) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Marks And Plates (Pc60) (Arabic)
| 01***08 | Screw | 4 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Caution,Kiip Out Of Turning Area | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Marks And Plates (Pc60) (English)
| 09***00 | Plate? Safety,Lock Lever (With Lock Pin) | 1 |
| 09***00 | Plate? Safety,Off Limit Within Swing Area | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Marks And Plates (Pc60) (Russian)
| 01***08 | Screw | 4 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Caution,Keep Out Of Turning Area | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Operator'S Cab (1/6) (For U.S.A.)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 6 |
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Operator'S Cab (2/6) (For U.S.A.)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***16 | Screw, Mount Parking Lights | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Operator'S Cab (3/6) (For U.S.A.)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Screw | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Operator'S Cab (4/6) (For U.S.A.)
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 2 |
| 01***05 | Washer,(Without Window Washer) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Operator'S Cab (5/6) (For U.S.A.)
| 01***10 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***10 | Screw,(For Lighter) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Operator'S Cab (6/6) (For U.S.A.)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***10 | Screw,(With Air Conditioner) | 2 |
| 01***10 | Screw | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Spare Parts : Unit_01_of_02
| 04***47 | V-Belt,(With 25a Alternator) | 1 |
| 07***35 | O-Ring,Hydraulic Oil Filter | 2 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 5 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Spare Parts : Unit_02_of_02
| 04***47 | V-Belt,(With 25a Alternator) | 1 |
| 07***35 | O-Ring,Hydraulic Oil Filter | 2 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 5 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Spare Parts (For U.S.A.)
| 04***47 | V-Belt,(With 25a Alternator) | 1 |
| 07***35 | O-Ring,Hydraulic Oil Filter | 2 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 5 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Tool (Except Japan)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***45 | Nozzle, Grease Pump (Non-Flexible Type) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Tool (For Russian)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***45 | Nozzle, Grease Pump (Non-Flexible Type) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Tool (For U.S.A.)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***45 | Nozzle, Grease Pump (Non-Flexible Type) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Mark Plate? Tool And Kit : Tool (Std)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***45 | Nozzle, Grease Pump (Non-Flexible Type) | 1 |
Optional Parts
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Blade Cylinder (For Front Blade)
| 07***05 | O-Ring, Steering Pump Mounting | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Blade Piping (1/2) (For Front Blade)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 07***34 | O-Ring,(For Without Brake Assistor) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Blade Piping (2/2) (For Front Blade)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***34 | O-Ring,(For Without Brake Assistor) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Car Cooler Piping (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Car Cooler Piping (2/2)
| 01***40 | Bolt | 5 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Car Cooler Related Parts
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Compressor And Control Panel (Car Cooler)
| 20***60 | Case Ass'Y | 1 |
| 20***70 | Switch | 1 |
| 20***80 | Resistor | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Cooling Unit (Car Cooler)
| 20***60 | Evaporator | 1 |
| 20***70 | Case Ass'Y | 1 |
| 20***80 | Grille Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Floor Plate And Box (For Front Blade)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Front Blade
| 01***30 | Bolt,(Not Used With Emergency Str.) | 12 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 12 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 15 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Machinery Compartment Car Cooler
| 20***60 | Cover | 1 |
| 20***10 | Frame | 1 |
| 20***40 | Cover | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Radiator Net
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***40 | Nut,Wing | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Rear View Mirror
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
| 08***24 | Mirror,Rear View | 1 |
| 20***10 | Support | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Revolving Frame Under Cover
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 19 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 19 |
| 01***32 | Washer,(With Auto Emergency Steering) | 19 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Self-Supply Pump
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 20***20 | Pump Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Swivel Joint (For Front Blade)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Track Frame (For Front Blade)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***10 | Frame,Track | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Track Frame Cover
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 20***20 | Guard (Welded) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Track Roller Guard
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 20***20 | Guard (Welded) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Travel Control Linkage (1/2) (For Front Blade)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Travel Control Linkage (2/2) (For Front Blade)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 4 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Vandalism Protection
| 07***00 | Cap,(For Vandalism) | 1 |
| 20***10 | Frame,Revolving | 1 |
| 20***20 | Lock Ass'Y,(Sandy And Dusty Terrain S.) | 3 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Window Washer
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
| 20***90 | Grommet | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Work Equipment Control Linkage (1/2) (For Front Blade)
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Work Equipment Control Linkage (2/2) (For Front Blade)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 14 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Work Equipment Control Linkage (For Arm? Swing) (1/2) (Front Blade)
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Work Equipment Control Linkage (For Arm? Swing) (2/2) (Front Blade)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 6 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Work Equipment Control Linkage (For Boom? Bucket) (1/2) (Front Blade)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Work Equipment Control Linkage (For Boom? Bucket) (2/2) (Front Blade)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 7 |
Komatsu : Pc60-5(S/N 20501-Up) : Optional Parts : Work Equipment Control Linkage (For Front Blade)
Revolving Frame? Guard And Cab
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Car Heater
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Floor Plate And Box (Except Japan)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Head Guard
| 01***65 | Bolt, Mount Radiator To Frame (Bottom) | 8 |
| 01***32 | Seat (Welded) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Heater And Defroster (Except Japan)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 11 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Machinery Compartment (1/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 24 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Machinery Compartment (2/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Machinery Compartment (3/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 11 |
| 01***32 | Washer,(With Auto Emergency Steering) | 11 |
| 20***10 | Cover | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Cab (1/6) (Except Japan)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 6 |
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Cab (2/6) (Except Japan)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***16 | Screw, Mount Parking Lights | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Cab (3/6) (Except Japan)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Screw | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Cab (4/6) (Except Japan)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Cab (5/6) (Except Japan)
| 01***10 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***10 | Screw,(For Lighter) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Cab (6/6) (Except Japan)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***10 | Screw,(With Air Conditioner) | 2 |
| 01***10 | Screw | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Seat (1/2) (Except Japan)
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 20***40 | Belt,Seat | 1 |
| 20***00 | Seat Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Seat (2/2) (Except Japan)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Seat (With Arm Rest) (For U.S.A.)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 9 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Operator'S Seat (Without Arm Rest)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Revolving Frame? Guard And Cab : Revolving Frame
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***70 | Bolt | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
Swing And Final Drive
Komatsu : Pc60-5(S/N 20501-Up) : Swing And Final Drive : Sprocket
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 24 |
| 01***40 | Bolt,(With Center Guard) | 24 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 24 |
Komatsu : Pc60-5(S/N 20501-Up) : Swing And Final Drive : Swing Circle
| 01***80 | Bolt,(For Adjustable Rod) | 48 |
| 04***38 | Pin, Dowel | 2 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Swing And Final Drive : Swing Machinery
| 01***55 | Bolt, Mount Lh Bracket | 2 |
| 01***55 | Bolt,(For Reinforced Type) | 10 |
| 01***05 | Bolt, Mount Tube | 1 |
Under Carriage
Komatsu : Pc60-5(S/N 20501-Up) : Under Carriage : Carrier Roller
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 8 |
Komatsu : Pc60-5(S/N 20501-Up) : Under Carriage : Front Idler
| 07***38 | Ring, Seal - Between Sections | 2 |
| 07***08 | Plug (Kit) | 1 |
| 14***16 | Floating Seal Ass'Y,(For D60pl) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Under Carriage : Recoil Spring
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***65 | Bolt | 8 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Under Carriage : Track Frame
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***20 | Guard (Welded) | 4 |
Komatsu : Pc60-5(S/N 20501-Up) : Under Carriage : Track Roller
| 01***65 | Bolt | 48 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 48 |
| 07***35 | O-Ring,(F4350-61a0 -32 ) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Under Carriage : Track Shoe
| 01***18 | Nut? Shoe (Kit) | 386 |
| 10***20 | Link,Track? L.H | 84 |
| 10***21 | Link,Track? L.H | 84 |
Work Equipment
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Arm
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***12 | Lock,(With Rain Cap) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Arm Cylinder
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Capscrew | 8 |
| 01***11 | Nut,(With Under Mirror) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Boom
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 1 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 6 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Boom Cylinder
| 01***50 | Bolt (Kit) | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket Cylinder
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Capscrew | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket? 0.08m3 Width 350mm
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***00 | Bucket Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket? 0.08m3 Width 350mm? With Hook (Except Japan)
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***70 | Hook (Welded) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket? 0.11m3 Width 450mm
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***10 | Bucket Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket? 0.11m3 Width 450mm? With Hook (Except Japan)
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***70 | Hook (Welded) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket? 0.18m3 Width 550mm
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***30 | Plate,R.H. (Welded) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket? 0.18m3 Width 550mm? With Hook (Except Japan)
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***30 | Plate,R.H. (Welded) | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket? 0.25m3 Width 650mm
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***40 | Bucket Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket? 0.25m3 Width 650mm? With Hook (Except Japan)
| 01***65 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***90 | Bucket Ass'Y | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Bucket? 0.32m3 Width 725mm
| 01***68 | Bolt | 6 |
| 01***28 | Nut (Std) | 6 |
| 20***12 | Pin | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Hydraulic Piping (Attachment Side)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 9 |
| 01***32 | Washer,(With Auto Emergency Steering) | 9 |
| 07***08 | Hose | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Link
| 01***60 | Bolt, Tube To Oil Cooler | 4 |
| 01***20 | Bolt | 2 |
| 01***30 | Bolt | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Long Arm
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***12 | Lock,(With Rain Cap) | 2 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Single Shank Ripper
| 01***30 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 4 |
| 09***88 | Pin | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Slope Finishing Bucket
| 01***30 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 4 |
| 20***10 | Bucket,Slope Finishing | 1 |
Komatsu : Pc60-5(S/N 20501-Up) : Work Equipment : Trapezoidal Bucket
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 12 |
| 01***30 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 16 |
PC60-5(S/N 20501-UP) serial number reference
The serial plate is riveted to the right-hand side of the cab on the lower frame, typically just behind the front idler or beneath the operator's window. The prefix is the first three characters of the model designation (e.g., PC6) followed by the dash-number (5), identifying the family and generation.
| Prefix | Identifies | Notes |
|---|---|---|
| PC60-5 | Standard PC60-5 | S/N 20501-UP. Factory parts catalog and engine guide confirm this is the primary generation for this serial range. Engine: 4D95L-1K. Production years: 1987–1997. |
Frequently asked questions
What engine does the Komatsu PC60-5 (S/N 20501-UP) use?
The Komatsu PC60-5 (S/N 20501-UP) is powered by the Komatsu 4D95L-1K diesel engine, producing approximately 60 horsepower (44-45 kW).
What is the operating weight of the Komatsu PC60-5?
The operating weight varies by configuration: the standard PC60-5 weighs approximately 6,300 kg, the PC60L-5 weighs about 6,800 kg, and the PC60U-5 weighs around 7,000 kg.
What model replaced the Komatsu PC60-5?
The Komatsu PC60-6 succeeded the PC60-5 series, followed by the PC60-7 and subsequent generations in the PC60 line.
What PC60-5(S/N 20501-UP) owners discuss
What engine powers the Komatsu PC60-5 (S/N 20501-UP) and what are its common fuel system quirks?
The PC60-5 (S/N 20501-UP) uses the Komatsu 4D95L-1K engine. Owners report that the fuel system is sensitive to contamination. A common issue is water accumulation in the fuel filter sediment bulb, which causes poor acceleration or intermittent stalling. The fuel tank bottom can accumulate gunk over time, restricting flow and causing black smoke or hesitation at idle. Cleaning the tank and ensuring the sediment line to the transfer pump inlet is clear is a standard fix. The engine is a 4-cylinder diesel producing approximately 44–45 kW (60 HP) at 2,200 rpm, with a rated power of 40.5 kW (54 HP) at 2,100 rpm depending on the specific configuration and spec sheet source. Fuel consumption varies by duty cycle but is generally efficient for its class. Variations in horsepower ratings exist between different factory spec sheets for this serial range.
What are the typical hydraulic behaviors and failure points for the PC60-5?
The hydraulic system relies on a main pump and pilot controls. A frequent failure point is the hydraulic filter housing; the gaskets can fail, allowing air ingress or causing the pump to overheat due to restricted flow. Owners recommend checking the filter housing bolts and replacing gaskets if pressure drops. The hydraulic oil cooler is also a critical component; failure can lead to overheating oil, which may leak into the engine coolant or cause radial seal failure. The swing system is prone to unexpected locking or motor strain, often linked to switch indicator malfunctions rather than hydraulic failure. Pilot lines under the machine floor are known to fail prematurely, sometimes within days of purchase if the machine was sitting. Checking for blockages in the case drain lines of the final drives and swing motor is essential, as pressure buildup here can lead to shaft seal failures.
What undercarriage wear patterns and maintenance issues are typical for this machine?
The PC60-5 shares its undercarriage design with the Bobcat 130. Common wear items include the final drive planetaries and the main pivot. Owners report that the track adjusters can seize, requiring replacement of the adjuster mechanism and often both tracks if one is worn. The lower rollers and bottom rollers are subject to heavy wear, with specific roller designs noted for serial ranges up to 52373. Track speed issues are often traced to low battery charge or hydraulic flow restrictions rather than undercarriage wear alone. The machine has a track width of 610 mm for standard models, which affects ground pressure and wear rates. Regular inspection of the track tension and roller seals is advised to prevent premature failure.
What are the common electrical and sensor issues on the PC60-5?
The PC60-5 uses a Nippondenso starter system. A common issue is premature failure of aftermarket starter solenoids, leading to no-start conditions. Owners verify voltage at the battery terminals and the ignition switch output (small red wire) to diagnose no-start issues. The key switch is also a frequent point of failure; if it fails, the machine can be started by shorting the starter circuit, but the switch must be replaced for reliable operation. The swing lock switch and its indicator light are known to malfunction, causing the machine to appear stuck in 'swing lock' mode even when the switch is off. Electrical connections under the floor panels should be taped or bagged to prevent moisture ingress, as many hydraulic lines and wiring run continuously to the control valve in this area.
What should be checked when buying a used PC60-5 (S/N 20501-UP)?
When inspecting a used PC60-5, check the following: 1. Engine: Look for black smoke at idle, which indicates fuel tank gunk or injector issues. Verify the fuel filter sediment bulb is dry. 2. Hydraulics: Test all boom, arm, and bucket functions for full pressure and speed. Check the hydraulic filter housing for leaks. Inspect the hydraulic oil cooler for signs of oil in the coolant. 3. Undercarriage: Check the track adjusters for movement. Inspect the final drive planetaries for play or noise. Look for leaks at the final drive shaft seals. 4. Electrical: Test the key switch and starter solenoid operation. Verify the swing lock switch functionality. 5. Structure: Inspect the boom pins and general boom condition for wear. Check the door latch and windshield integrity, as these are common wear items. 6. Serial Verification: Confirm the serial number is 20501 or higher to ensure correct engine (4D95L-1K) and parts compatibility.
What are the fluid specifications and capacities for the PC60-5?
The PC60-5 requires Komatsu EO, TO, or equivalent hydraulic oil. Engine oil specifications should follow Komatsu standards for diesel engines. Coolant should be Komatsu Super-coolant AF-NAC or equivalent. The fuel tank capacity is approximately 95 liters (25.1 gallons). The hydraulic system capacity varies by configuration but requires regular filter changes to prevent pump overheating. The engine oil capacity is not explicitly stated in the provided sources but should be verified against the 4D95L-1K engine manual. The machine uses AW46 or AW64 hydraulic fluid in some aftermarket contexts, but Komatsu EO/TO is the factory specification. Always verify fluid types with the operation and maintenance manual for the specific serial range.
What safety-critical fixes or inspections are recommended for the PC60-5?
Safety-critical items include the swing brake system and the hydraulic pressure relief settings. The swing brake can fail unexpectedly, leading to uncontrolled swing. Verify the brake function regularly. The hydraulic system operates at high pressures; any leaks from pilot lines or main hydraulic hoses must be repaired immediately to prevent injury. The shaft seals on the final drives and swing motor are rated for low pressure (5 bar / 72.5 PSI); if case drain pressure exceeds this, seal failure is imminent. Have your dealer verify the swing brake adjustment and hydraulic pressure settings to ensure they meet factory specifications. Do not operate the machine with known hydraulic leaks or brake issues.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific PC60-5(S/N 20501-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.