Komatsuhydraulic excavatormedium (pc100 - pc270)
Komatsu PC250-6(S/N 10001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu PC250-6 (S/N 10001-UP) is a mid-size hydraulic crawler excavator in the 25-27.5 t class, part of Komatsu's Japan-market Dash-6 generation built through the mid-to-late 1990s. It runs a Komatsu SA6D102E six-cylinder diesel, mechanically governed and mechanically injected, turbocharged and air-to-air aftercooled, rated 128 kW (171.7 hp) at 2,300 rpm, the same base engine shared across the PC220-6 through PC250-6/PC250LC-6 range. This S/N 10001-UP serial break covers the standard, narrower-undercarriage build of the platform, sold alongside a long-undercarriage PC250LC-6 export version and a PC250HD-6Z heavy-duty custom variant. Standard configuration pairs a 5.85 m boom with a 2.0 m standard arm or 2.5 m long arm, with buckets ranging roughly 0.76 to 1.53 m3 depending on application. It followed Komatsu's Dash-5 generation (PC220-5 class) and was itself succeeded by the Dash-7 generation PC250-7, which moved to a revised SAA6D102E-2 engine.
Across the Dash-6 run, the core engine and hydraulic platform stayed constant; differences between siblings come down mostly to undercarriage width and length rather than powertrain change, so pump, engine, and swing/travel drive components cross freely between PC220-6, PC230-6, and PC250-6/LC-6 machines built to this serial range. The generation still matters in the used and parts market because it predates electronic engine control: the SA6D102E has no engine control module to fail, and diagnostics run off the in-cab monitor panel rather than a laptop tool, which keeps repair costs and diagnostic complexity low for owners willing to work on a mechanical fuel system. Because most public spec listings for this platform actually document the wide-track LC sibling, buyers and parts sourcing on the base PC250-6 should confirm undercarriage width, operating weight, and any in-range running changes against the machine's own serial plate rather than assume LC figures apply.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu PC250-6(S/N 10001-UP) specifications
Engine
| Engine model | Komatsu SA6D102E, 6-cylinder inline diesel with direct injection, turbocharged and air-to-air aftercooled. Same base engine family is used across the PC220-6 through PC250-6/PC250LC-6 range built to this serial block. |
| Net power | 128 kW (171.7 hp) at 2,300 rpm, SAE net (flywheel) rating. |
| Gross power | Not separately published for this model; only the net flywheel rating above is documented. |
| Displacement | 5.88 L (358.9 cu in / 5,880 cc). |
| Bore x stroke | 102 mm x 120 mm. |
| Cylinders | 6, inline. |
| Emissions tier | Built before formal EPA/EU nonroad emissions-tier certification applied to this power class. No tier rating documented for this engine. |
Weights
| Operating weight, long-undercarriage build | 27,500 kg (60,627 lb) with 700 mm shoes and standard bucket and equipment. This is the configuration documented in published spec listings for this serial range. |
| Operating weight, standard undercarriage | Not separately published. The standard-track chassis is narrower and shorter than the long-undercarriage build and runs lighter with correspondingly higher ground pressure than the figure above. Confirm the exact figure with a dealer for this specific configuration. |
| Ground pressure | 44.8 kPa (6.5 psi) on 700 mm shoes, long-undercarriage build. |
Dimensions
| Transport length | 9.77 m (32 ft 1 in). |
| Transport width, over tracks | 3.29 m (10 ft 10 in). |
| Transport height, top of cab | 3.02 m (9 ft 11 in). |
| Tail swing radius | 2.86 m (9 ft 5 in). |
| Ground clearance | 0.50 m (1 ft 8 in). |
| Track length on ground | 3.95 m (12 ft 11 in). |
| Track gauge | 2.59 m (8 ft 6 in). |
| Track shoe width | 700 mm (27.6 in) standard triple-grouser shoe. Narrower shoe widths were offered as options. |
| Configuration note | Dimensions above match the long-undercarriage (LC) build. Standard-undercarriage dimensions for this exact machine are not separately documented in available listings. |
Performance
| Max dig depth | 7.11 m (23 ft 4 in). |
| Max reach at ground level | 10.39 m (34 ft 1 in). |
| Max dump/loading height | 7.13 m (23 ft 5 in). |
| Max cutting height | 9.78 m (32 ft 1 in). |
| Max vertical-wall dig depth | 6.17 m (20 ft 3 in). |
| Swing speed | 11.5 rpm. |
| Max travel speed | 5.1 km/h (3.2 mph). |
| Gradeability / drawbar pull | Not documented in available sources for this model. |
| Boom and arm configuration | 5.85 m mono-boom paired with a 2.0 m standard arm or a 2.5 m long arm. |
| Bucket capacity | Heaped capacity range about 0.76-1.53 m3 (1.0-2.0 yd3) depending on bucket fitted; standard bucket around 1.1 m3 (1.4 yd3). |
Forces
| Bucket digging force | Not documented in available sources for this model. Figures typically vary between standard and long-arm configurations; confirm with the factory shop manual or a dealer. |
| Arm/stick digging force | Not documented in available sources for this model. Expect a difference between the 2.0 m standard arm and 2.5 m long arm ratings; confirm with the factory shop manual or a dealer. |
Service capacities (summary)
| Fuel tank | 310 L (81.9 US gal). |
| Hydraulic system | 246 L total system capacity; about 166 L (43.9 US gal) refill/reservoir capacity. |
| Engine oil, pan with filter | 23.5 L specified capacity, about 22.5 L on refill. |
| Cooling system | 22.8 L. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PC250-6(S/N 10001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 23.5 L specified, 22.5 L refill (6.2 US gal / 5.9 US gal) | Komatsu genuine engine oil (EO). SAE 15W-40 covers most ambient ranges; drop to SAE 10W in sustained cold below about -20C (-4F); single-grade SAE 30 is acceptable in consistently warm climates above 10C (50F). |
| Cooling system | 22.8 L (6.0 US gal) | Komatsu genuine Supercoolant, a permanent-type ethylene glycol coolant, diluted with clean water per the mix ratio on the coolant container. All-season formulation gives year-round freeze and corrosion protection; do not mix coolant types. |
| Fuel tank | 310 L (81.9 US gal) | No. 2-D diesel fuel meeting ASTM D975 or the local equivalent. Switch to No. 1-D or a winter-blend diesel in cold climates to prevent fuel gelling. |
| Hydraulic system total (specified, incl. lines/cylinders/cooler) | 246 L (65.0 US gal) | Komatsu genuine hydraulic oil (HO), ISO VG46 anti-wear grade for normal ambient ranges. |
| Hydraulic tank (refill) | 166 L (43.9 US gal) | Same Komatsu genuine hydraulic oil (HO) as the system total. On this era of machine, same-viscosity engine oil is an accepted substitute when dedicated hydraulic oil isn't on hand. |
| Final drive case (each side) | 8.0 L specified, 7.4 L refill (2.1 US gal / 2.0 US gal) | Komatsu genuine engine oil (EO) - final drive cases on this era of machine are factory-filled with engine oil, not a separate gear oil. Same viscosity-by-climate guidance as the crankcase. |
| Swing drive (swing machinery case) | 6.6 L refill, about 6.8 L specified (1.74 US gal / 1.8 US gal) | Komatsu genuine engine oil (EO), added through the swing machinery oil filler and checked between the H and L marks on the dipstick. |
| Pilot circuit / other reservoirs | No separate reservoir documented; pilot circuit draws from the main hydraulic tank. | Same hydraulic oil (HO) as the hydraulic tank - no standalone fluid spec. |
| Grease (all fittings) | Spec only - serviced by grease gun at scheduled work-equipment and swing-circle points, no fill-volume chart entry. | Komatsu genuine G2-LI multipurpose lithium EP grease for all grease points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu PC250-6(S/N 10001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the PC250-6(S/N 10001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
Track SA6D102E oil condition between 500-hour changes; this pre-ECM engine gives no self-diagnostic warning beyond gauge readings, so lab analysis catches bearing and injection-pump wear early. Send hydraulic oil out at every 1,000-hour filter change - swing and travel motor seal failures here trace mostly to contaminated oil, not bad seal batches. Final drive and swing case fluid is engine oil, not gear oil, so sample those cases too. Watch the monitor panel for stored fault codes covering the EPC pump solenoid, swing brake, and governor motor circuits.
Corrective & Common Repairs
Sudden hydraulic power loss or momentary stalling under load usually traces to the LS-EPC pump control circuit or a clogged return/pilot filter, not the pump itself - check the filter for metal before chasing wiring. Hard cold starts on the SA6D102E point to the glow plug relay or its wiring, not the injection pump. A flashing charge light is commonly a corroded alternator connector rather than a dead alternator. Boom or arm drift under load points to a worn relief valve cartridge or spool leakage in the main control valve.
Overhaul & Rebuild Points
Undercarriage wear accelerates fastest from pivot turns; measure track pad thickness and roller/idler play before any major rebuild, since this weight class replaces these components as a set. Swing and travel motor reseals recur when oil contamination isn't addressed first, so flush and inspect the hydraulic system before returning a rebuilt motor to service. At 2,000-hour milestones, check SA6D102E valve clearances and turbocharger shaft play, both wear points on a mechanically governed engine with no electronic correction. Rebuild the main control valve when relief cartridges show drift across multiple functions.
Seasonal & Environment Servicing
The SA6D102E's glow plug preheat circuit only engages below about 10C (50F) coolant temperature - no visible preheat cycle in mild weather is normal, not a fault. Switch to No. 1-D or winter-blend diesel and confirm coolant dilution ratio before cold season to prevent fuel gelling and freeze damage. In hot or dusty environments, clean radiator, oil cooler, and condenser fins more often than the standard 500-hour interval, and check the air cleaner restriction indicator daily. Adjust track tension for soft or rocky ground to slow undercarriage wear.
PC250-6(S/N 10001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 6732-71-6111 | Filter, Fuel - Secondary | Fuel system service | Check fitment → |
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| 600-311-9101 | Fuel Filter Ass'Y | Fuel system service | Check fitment → |
| 600-311-9121 | Cartridge,Fuel Filter | Fuel system service | Check fitment → |
| 09637-30161 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PC250-6(S/N 10001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E02 | PC-EPC (pump controller electronic proportional control) system fault | open or shorted wiring/connector to the hydraulic pump control solenoid, or a fault in the pump controller | check the EPC solenoid connector and harness for continuity and shorts to ground before replacing the pump controller |
| E03 | swing (rotary) parking brake system fault | shorted or open swing-brake solenoid coil, or brake wiring insulation rubbed through to ground | measure swing brake solenoid coil resistance with an ohmmeter and inspect harness insulation before opening the swing brake valve |
| E05 | governor motor system fault (electronic engine-speed control actuator; some monitor panel revisions display this as E07) | worn or broken drive gear teeth inside the governor motor, or a fault in its feedback/wiring circuit | check governor motor linkage and gear engagement, then verify feedback signal at the controller before replacing the motor |
| E101 | fault history memory abnormal | monitor controller memory fault or a backup power interruption that corrupted the stored fault log | clear the fault history in service mode and recheck; replace the monitor panel if the code returns |
| E102 | clock data abnormal (monitor real-time clock fault) | failing clock backup circuit or battery on the monitor panel | reset the clock in service mode; replace the monitor panel if it will not hold the time setting |
| E103 | buzzer output circuit fault | shorted buzzer driver circuit or buzzer harness contacting the 24V supply wiring | inspect buzzer wiring for chafing or contact with the battery supply line, then test the buzzer driver at the monitor panel |
| E104 | air cleaner (air filter) restriction warning | clogged air filter element raising intake restriction above the warning threshold | inspect and clean or replace the air filter element and check the restriction indicator switch |
| E227 | engine speed sensor signal abnormal | faulty or misadjusted engine speed sensor, damaged wiring, or excessive sensor air gap | check sensor wiring and connector, verify air gap and cleanliness, then test sensor output before replacing it |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PC250-6(S/N 10001-UP) attachments & work tools
Buckets (GD/HD/rock)
PC250-6 sits in the 20-27 t class alongside its long-undercarriage PC250LC-6 sibling, which shares the same boom, arm, and front-attachment interface. General-duty (GD) buckets for this class typically run 0.9-1.6 m3 (1.2-2.1 cu yd), with the factory-style standard bucket near 1.5 m3 heaped and roughly 1.2 m (about 48 in) wide. Heavy-duty (HD) and rock buckets run smaller, typically 0.7-1.1 m3, with thicker wear plates and reinforced sidewalls for abrasive or rocky digging; both mount pin-on or through a quick coupler on the same class of pins.
Hydraulic hammers
Medium-duty hydraulic breakers match this class, generally in the 1.2-2.0 t (about 2,600-4,400 lb) operating-weight bracket - above true mini-excavator breakers and below the 30+ t class. Flow and pressure must be matched to the carrier's auxiliary circuit spec; too much flow overheats the breaker and accelerates seal wear, too little pressure gives a weak, inefficient strike.
Quick couplers
This weight class commonly runs hydraulic wedge-type or pin-grabber couplers sized for roughly 80 mm class pins, matching the bucket and attachment pin diameter used across the PC250 platform. Both hydraulic (in-cab actuated) and mechanical (manual pin) couplers are offered for this size machine; hydraulic types need a dedicated coupler line tied into the machine's auxiliary hydraulics.
Thumbs/grapples
Hydraulic thumbs for this class come as pin-on fixed thumbs or progressive-link thumbs that pivot off the bucket linkage or a dedicated cylinder, useful for brush, debris, and pipe handling. Fixed-jaw or rotating grapples sized for roughly 20-28 t carriers are also offered for sorting and demolition/material handling; rotation typically draws off the machine's auxiliary or high-flow circuit.
Rippers
Single-shank rippers are offered for the PC250 class, mounted pin-on in place of the bucket for breaking hard-packed or frozen ground, weathered rock, and similar material the standard bucket can't penetrate. Multi-shank tyne rippers are also available for lighter scarifying work; shanks use a wear-resistant alloy steel rated for repeated impact loading.
Hydraulic-kit notes
Breakers, rotating grapples, and hydraulic thumbs need the machine fitted with an auxiliary attachment circuit; this class typically runs a medium-pressure one-way circuit sized for breaker duty rather than a dedicated high-flow shear/mulcher circuit. Verify each attachment's flow and pressure spec against the machine's auxiliary circuit before pairing, since mismatch causes seal damage or poor tool performance.
All PC250-6(S/N 10001-UP) assemblies by section
Every catalogued assembly group for the Komatsu PC250-6(S/N 10001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Accessory
Komatsu : Pc250-6(S/N 10001-Up) : Accessory : Spare Parts
| 04***45 | V-Belt Set,Fan | 1 |
| 07***80 | O-Ring, Front Coupling Cage | 2 |
| 07***23 | O-Ring | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Accessory : Spare Parts (For Long Drain) (Sandy And Dusty Terrain Spec.)(#10050-)
| 07***80 | O-Ring (Kit) | 2 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Accessory : Spare Parts (For Long Drain)(#10050-)
| 07***80 | O-Ring (Kit) | 2 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Accessory : Spare Parts (Sandy And Dusty Terrain Spec.)(#10015-)
| 07***80 | O-Ring (Kit) | 2 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Accessory : Tool Kit
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***00 | Nozzle, Grease Pump (Flexible Type) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Accessory : Tool Kit (For Power Pull Up Window Type Cab)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***00 | Nozzle, Grease Pump (Flexible Type) | 1 |
Cooling System
Komatsu : Pc250-6(S/N 10001-Up) : Cooling System : Cooling (Piping)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 07***55 | Clamp, Hose | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Cooling System : Cooling (Radiator)(#10001-10043)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***16 | Bolt? Wing,Wing | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Cooling System : Cooling (Radiator)(#10044-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***16 | Bolt? Wing,Wing | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Cooling System : Cooling (Sub Tank And Radiator Mount)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***35 | Bolt,(With Rops) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Cooling System : Fan Guard (Sandy And Dusty Terrain Spec.) (W/O Air Conditioner)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***32 | Washer,(With Auto Emergency Steering) | 11 |
Komatsu : Pc250-6(S/N 10001-Up) : Cooling System : Fan Guard (Sandy And Dusty Terrain Spec.) (With Air Conditioner)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***32 | Washer,(With Auto Emergency Steering) | 14 |
Komatsu : Pc250-6(S/N 10001-Up) : Cooling System : Fan Guard (With Air Conditioner)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***32 | Washer,(With Auto Emergency Steering) | 14 |
Electrical System
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Additional Work Lamp
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***55 | Screw | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Additional Work Lamp (With F.O.P.S.)
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Battery (115e41r) (Hy.Brid Type) (Wet)
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
| 08***30 | Cable | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Battery (Large Capacity) (Wet) (Nx300)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Battery (Ns120) (Dry)
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
| 08***50 | Electrolyte,(For Dry Type Battery) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Battery Less
| 08***30 | Cable | 1 |
| 08***30 | Wire | 1 |
| 08***11 | Cap,(Europa Spec.) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Horn
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 08***10 | Clip,(With Corrosion Resistor) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Horn (Big Sound)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Rear Work Lamp
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 08***14 | Band,(For Additional Fuel Strainer) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Travel Alarm
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Wiring (Battery Case)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Wiring (Clamp)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Wiring (Main Harness)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 18 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Wiring (Main Harness) (Clip)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Wiring (Starting Harness)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt - M8 X 30lg | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Electrical System : Wiring (Working Lamp? Front)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Engine Related Parts
Komatsu : Pc250-6(S/N 10001-Up) : Engine Related Parts : Air Cleaner Connection (For Double Element)
| 07***05 | Clamp,Hose | 2 |
| 07***20 | Clamp,(Except Japan) | 2 |
| 20***10 | Hose | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Engine Related Parts : Damper(#10001-10050)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 20***20 | Pin | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Engine Related Parts : Damper? Pump And Tube(#10051-)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***40 | Bolt (Op) | 10 |
| 01***80 | Bolt,(With Corrosion Resistor) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Engine Related Parts : Engine Mount(#10001-10043)
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
| 07***50 | Hose, Right | 1 |
| 07***55 | Clip,94 | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Engine Related Parts : Engine Mount(#10044-10050)
| 01***65 | Bolt,(Used With Pin Puller) | 14 |
| 01***55 | Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
Komatsu : Pc250-6(S/N 10001-Up) : Engine Related Parts : Engine Mount(#10051-)
| 01***65 | Bolt,(Used With Pin Puller) | 14 |
| 01***55 | Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
Komatsu : Pc250-6(S/N 10001-Up) : Engine Related Parts : Engine Related Parts (Bracket)(#10001-10043)
| 01***65 | Bolt,(Used With Pin Puller) | 14 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Engine Related Parts : Fuel Control
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***40 | Bolt (Op) | 3 |
Fuel Tank And Related Parts
Komatsu : Pc250-6(S/N 10001-Up) : Fuel Tank And Related Parts : Fuel Lines
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Fuel Tank And Related Parts : Fuel Lines (With Pre-Fuel Filter And Water Separator)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Fuel Tank And Related Parts : Fuel Lines (With Pre-Fuel Filter)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Fuel Tank And Related Parts : Fuel Lines (With Water Separator)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Fuel Tank And Related Parts : Fuel Tank(#10001-10010)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Fuel Tank And Related Parts : Fuel Tank(#10011-)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Guard
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Counter Weight (4880 Kg)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***08 | Screw | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Counter Weight Mounting
| 20***11 | Bolt | 4 |
| 20***20 | Plate | 4 |
| 20***10 | Plate? 1.6mm,1.6mm | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Cover (Machine Cab) (Upper)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 11 |
| 01***16 | Screw | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Frame (Machine Cab)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 20***21 | Frame | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Handrail
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 20***70 | Hand Rail | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Hood(#10001-10279)
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Hood(#10280-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Left Side Door (Door) (Machine Cab)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Left Side Door (Installation Parts) (Machine Cab) : Unit_02_of_02
| 01***30 | Bolt,(Not Used When Towing Winch) | 14 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Left Side Door (Installation Parts) (Machine Cab) : Unit_01_of_02
| 01***30 | Bolt,(Not Used When Towing Winch) | 14 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
| 20***10 | Sheet | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Left Side Door (With Hole)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Partition (Machine Cab)
| 01***30 | Bolt,(Not Used When Towing Winch) | 26 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 20 |
| 17***70 | Washer (Isolator Mounting) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Partition (With Air Conditioner)
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 12 |
| 17***70 | Washer (Isolator Mounting) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Partition (Without Air Conditioner)
| 01***30 | Bolt,(Not Used When Towing Winch) | 11 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 7 |
| 17***70 | Washer (Isolator Mounting) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Rear View Mirror? L.H. (Double)
| 01***30 | Screw | 4 |
| 08***18 | Mirror | 2 |
| 20***20 | Support | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Rear View Mirror? R.H.
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
| 20***63 | Support | 1 |
| 20***91 | Clamp,(For U.S.A.) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Right Side Case(#10001-10010)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Right Side Case(#10011-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Right Side Door (Machine Cab)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Under Cover (Revolving Frame) (Engine Room)(#10001-10049)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 22 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 26 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Under Cover (Revolving Frame) (Engine Room)(#10050-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 22 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 26 |
Komatsu : Pc250-6(S/N 10001-Up) : Guard : Under Cover (Revolving Frame) (Left Side Cover And Tool Box)
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 12 |
| 01***12 | Bolt | 3 |
Hydraulic System
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Arm And Bucket Line (Valve Arm Line)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Arm And Bucket Line (Valve Bucket Line)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Attachment Line Bracket) (Without Lock Valve)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Bracket)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Cross Valve? L.H.) (Demolition Spec.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***40 | Bolt (Op) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Cross Valve? R.H.)
| 01***32 | Washer, (Without Emergency Steering) | 12 |
| 07***35 | O-Ring, Upper Cooler Inlet And Outlet Ports | 1 |
| 07***34 | O-Ring,(For Front Attachment) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Cross Valve? R.H.) (Demolition Spec.)
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Cross Valve? R.H.) (Valve)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***40 | Bolt (Op) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Return Line) (Filter)(#10001-10011)
| 07***50 | O-Ring,Front Cover Plate | 2 |
| 07***12 | O-Ring, Divider Valve Mounting | 1 |
| 07***15 | O-Ring,(Y1621-01a0-10) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Return Line) (Filter)(#10012-)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***15 | O-Ring,(Y1621-01a0-10) | 1 |
| 07***50 | Ring, Seal - Between Sections | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Return Line)(#10001-10011)
| 01***50 | Bolt,(For D60pl) | 2 |
| 01***10 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Return Line)(#10012-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***50 | Bolt,(For D60pl) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Simple) (1/2)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***75 | Bolt - Tube Mounting | 6 |
| 01***60 | Capscrew | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Simple) (2/2)
| 01***40 | Bolt (Op) | 4 |
| 01***95 | Capscrew | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Simple) (Without Lock Valve) (2/2)
| 01***40 | Bolt (Op) | 4 |
| 01***95 | Capscrew | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (1 Actuator) (Valve Side)
| 01***40 | Bolt (Op) | 4 |
| 01***95 | Capscrew | 4 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (2 Actuator)
| 01***40 | Bolt (Op) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (Relief Valve) (175 Kg/Cm2)
| 70***00 | Valve Ass'Y,Suction And Safety | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (Relief Valve) (210 Kg/Cm2)
| 70***00 | Valve Ass'Y,Suction And Safety | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (Relief Valve) (250 Kg/Cm2)
| 70***00 | Valve Ass'Y,Suction And Safety | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Attachment Line (Relief Valve) (280 Kg/Cm2)
| 70***00 | Valve Ass'Y,(250kg/Cm2) Suction And Safety | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Boom Line (Valve Boom Frame) (With Drift Priventive)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 20 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Boom Line (Valve Boom Hose)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 8 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Boom Line (Valve Boom Line) (With Drift Priventive)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 1 |
| 07***40 | Bolt,(See Fig.6067) | 16 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Boom Line Clamp
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***11 | Nut,(With Under Mirror) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Boom Line Clamp (Without Lock Valve)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***11 | Nut,(With Under Mirror) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Delivery Line (Inlines Filter)
| 20***31 | Filter Ass'Y,Pressure? High | 1 |
| 20***40 | Element,Filter Ass'Y | 2 |
| 20***50 | Ring | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Delivery Line(#10001-10050)
| 01***80 | Bolt,(With Corrosion Resistor) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Delivery Line(#10051-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 24 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Drain Line
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 04***12 | Clip,See Fig. K4010-41a1 | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Drift Priventive (Arm)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***40 | Bolt (Op) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Drift Priventive (Boom)
| 01***40 | Bolt (Op) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Hydraulic Tank (With Sensor)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Ls Lines
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 04***12 | Clip | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Pump (Connecting Parts)(#10001-10050)
| 01***40 | Bolt (Op) | 10 |
| 01***32 | Washer,(With Auto Emergency Steering) | 10 |
| 07***23 | O-Ring,(F4350-68a0 -13 ) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Pump (Connecting Parts)(#10051-)
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (1 Actuator) (Safety Valve Less)(#10011-)
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 35 |
| 07***12 | Plug,(With Canvas Or Rops Canopy) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Sensor And Blind Parts) (1 Actuator) (Safety Valve Less)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 2 |
| 07***10 | Nut,(Without Auto Deceleration) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Sensor And Blind Parts) (3 Actuator)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 2 |
| 07***40 | Bolt,(See Fig.6067) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Sensor)
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 2 |
| 78***10 | Sensor,Pressure | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Valve Bracket)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Valve) (1 Actuator)(#10001-10010)
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 35 |
| 07***12 | Plug,(With Canvas Or Rops Canopy) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Valve) (1 Actuator)(#10011-)
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 37 |
| 07***12 | Plug,(With Canvas Or Rops Canopy) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Valve) (2 Actuator)(#10001-10010)
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 4 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 37 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Valve) (2 Actuator)(#10011-)
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 4 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 39 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Valve) (3 Actuator)(#10011-)
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 4 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 41 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Valve) (3 Acutator)(#10001-10010)
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 4 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 39 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Valve)(#10001-10010)
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 31 |
| 07***12 | Plug,(With Canvas Or Rops Canopy) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Main Valve (Valve)(#10011-)
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 33 |
| 07***12 | Plug,(With Canvas Or Rops Canopy) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Oil Cooler Line
| 01***40 | Bolt,For Weight Adjusting Bolt | 14 |
| 01***11 | Nut,(With Under Mirror) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Ppc Main Line (Hose? Main Valve Ppc)
| 08***19 | Band,(Without Air Conditioner) | 5 |
| 20***30 | Hose? 600mm | 1 |
| 20***80 | Hose? 300mm | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Ppc Main Line (Ppc Main Lines) (1 Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 08***14 | Band,(For Additional Fuel Strainer) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Ppc Main Line (Ppc Main Lines) (2 Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 08***36 | Band,(For 2nd Travel Speed) (Op) | 7 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Ppc Main Line (Valve Ppc Lines)(#10001-10010)
| 08***36 | Band,(For 2nd Travel Speed) (Op) | 5 |
| 20***80 | Hose? 900mm | 1 |
| 20***10 | Hose? 700mm | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Ppc Main Line (Valve Ppc Lines)(#10011-)
| 08***36 | Band,(For 2nd Travel Speed) (Op) | 5 |
| 20***80 | Hose? 900mm | 1 |
| 20***10 | Hose? 700mm | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Pressure Switch Block (With Sensor)(#10001-10010)
| 01***60 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Pressure Switch Block (With Sensor)(#10011-)
| 01***60 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Return Line (Block)
| 01***50 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***34 | O-Ring,(Not Used When (B) Spec.) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Return Line (Block) (For Additional Piping)
| 01***50 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***75 | Bolt - Tube Mounting | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Return Line (Block) (For Additional Piping) (D/Con)(#10011-)
| 01***50 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***75 | Bolt - Tube Mounting | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Return Line (Block) (Switch Valve) (For Additional Piping)(#10001-10010)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Return Line (Block) (Switch Valve) (For Additional Piping)(#10011-)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Return Line (Block) (Switch Valve)(#10001-10010)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Return Line (Block) (Switch Valve)(#10011-)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Return Line (Hose)
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Solenoid Valve (2 Actuator) (3 Actuator) (Solenoid Valve Line)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Solenoid Valve (2 And 3 Actuator) (Solenoid Valve Line) (Without Drift Preventive)(#10011-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Solenoid Valve (Solenoid Valve And Accumulator)
| 01***95 | Capscrew | 2 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***11 | Nut,(With Under Mirror) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Solenoid Valve (Solinoid Valve Line) (Without Drift Priventive)(#10011-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Solenoid Valve (Solinoid Valve Line)(#10001-10010)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Solenoid Valve (Solinoid Valve Line)(#10011-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Solenoid Valve (Swing Stroke Valve)(#10011-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Suction Line
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***85 | O-Ring,(Without Fuel Level Gauge) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Swing Lines
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***07 | Hose | 1 |
| 07***40 | Flange,Split (For Shipping) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Hydraulic System : Travel Lines
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
Main/Revolving Frame And Related Parts
Komatsu : Pc250-6(S/N 10001-Up) : Main/Revolving Frame And Related Parts : Boom Foot Pin
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 20***81 | Cover | 1 |
Marks And Plates
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Decal And Plate (English) (Lettering Type)(#10024-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Safety,Keep Out Of Turning Area | 1 |
| 09***01 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Decal And Plate (English)(#10001-10023)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***21 | Plate? Caution,Fuel Inlet | 1 |
| 09***01 | Plate? Operating,Work Equipment Control Lock Le | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Decal And Plate (English)(#10024-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Caution,Keep A Safe Distance | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Logo (Komatsu) (Large) (General)
| 09***00 | Plate? Mark,Komatsu?(Counter Weight) | 1 |
| 09***20 | Decal, Komatsu (Black Lettering) (Top Front Of Grille) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Marks And Plates (Sift Pattern? Iso)
| 09***00 | Plate? Safety,Operating Pattern Table (Jis) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Plate (Air Cleaner? Double Element)
| 09***61 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Plate (Boom Side? R.H.) (Logo Mark)
| 09***30 | Plate? Mark,Komatsu?(Counter Weight) | 1 |
| 09***20 | Decal, Komatsu (Black Lettering) (Top Front Of Grille) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Plate (Lifting Capacity)
| 20***50 | Plate,(For Pc250) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Plate (With 2 Accumlator) (Kit)(#10024-)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 2 |
| 09***00 | Plate? Safety,(English) (Lettering Type) | 2 |
| 09***7A | Plate? Safety,Accumulator (Japanese) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Plate (With 2 Accumlator)(#10024-)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 2 |
| 09***00 | Plate? Safety,(English) (Lettering Type) | 2 |
| 09***7A | Plate? Safety,Accumulator (Japanese) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Plate (With Accumlator) (Kit)(#10024-)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 1 |
| 09***00 | Plate? Safety,(English) (Lettering Type) | 1 |
| 09***7A | Plate? Safety,Accumulator (Japanese) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Marks And Plates : Plate (With Accumlator)(#10024-)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 1 |
| 09***00 | Plate? Safety,(English) (Lettering Type) | 1 |
| 09***7A | Plate? Safety,Accumulator (Japanese) | 1 |
Miscellaneous
Komatsu : Pc250-6(S/N 10001-Up) : Miscellaneous : Grease Pump (Electric Type)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Miscellaneous : Work Equipment Less
| 01***30 | Bolt - M8 X 30lg | 28 |
| 01***23 | Washer,(For Shipping) | 28 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
Operator'S Compartment And Control System
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Additional Work Lamp Switch
| 20***51 | Switch,Additional Work Lamp | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Air Conditioner (Cooling Line)
| 01***25 | Capscrew | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Air Conditioner (Heating Line And Duct)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Air Conditioner (Unit)
| 01***85 | Bolt - M8 X 85lg | 3 |
| 01***95 | Bolt | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Attachment Ppc Line (1 Actuator)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Car Heater (Cliping)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (English)(#10021-)
| 01***16 | Bolt - Box Mounting | 6 |
| 01***25 | Bolt | 1 |
| 01***25 | Screw | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Attachment Control Pedal) (1 Actuator)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***40 | Bolt (Op) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Attachment Control Pedal) (2 Actuator)(#10011-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt,(With Body Positioner) | 12 |
| 01***40 | Bolt (Op) | 7 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Attachment Ppc Line) (1 Actuator)(#10001-10010)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 08***36 | Band,(For 2nd Travel Speed) (Op) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Attachment Ppc Line) (1 Actuator)(#10011-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***11 | Clamp, Vinyl | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Attachment Ppc Line) (2 Actuator)(#10011-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***11 | Clamp, Vinyl | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Electric Governor Control) (Air Conditioner Unit)
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
| 01***30 | Bolt,(With Body Positioner) | 7 |
| 01***32 | Washer,(With Auto Emergency Steering) | 7 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Electric Governor Control) (Car Heater? 2000kcal)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***05 | Washer | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Electric Governor Control) (Car Heater? 3300kcal)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***05 | Washer | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Electric Governor Control) (Work Lever With Ppc Valve) (2 Actuator)(#10011-10043)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 08***14 | Clip - Harness | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Electric Governor Control) (Work Lever With Ppc Valve) (2 Actuator)(#10044-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 08***14 | Clip - Harness | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Electric Governor Control) (Work Lever With Ppc Valve)(#10001-10010)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Electric Governor Control) (Work Lever With Ppc Valve)(#10011-10043)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 08***14 | Clip - Harness | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Electric Governor Control) (Work Lever With Ppc Valve)(#10044-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 08***14 | Clip - Harness | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Left Stand) (Lever And Cover) (Work Lever With Ppc Valve)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Left Stand) (Stand And Rear Cover)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 8 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt - M8 X 30lg | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Mount Cushion)
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
| 20***90 | Plate | 2 |
| 20***10 | Cushion | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Travel Lines) (1 Actuator)(#10001-10010)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 10 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Travel Lines) (1 Actuator)(#10011-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Travel Lines) (2 Actuator)(#10011-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Travel Lines)(#10001-10010)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 10 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Travel Lines)(#10011-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Work Line) (Ppc Valve And Left Stand Hose)(#10001-10010)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Work Line) (Ppc Valve And Left Stand Hose)(#10011-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 8 |
| 04***11 | Clamp, Vinyl | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Work Line) (Right Stand Hose) (1 Actuator)(#10001-10010)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Work Line) (Right Stand Hose)(#10001-10010)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Ppc Work Line) (Right Stand Hose)(#10011-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
| 04***11 | Clamp, Vinyl | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Right Stand) (Lever And Cover) (Work Lever With Ppc Valve)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Right Stand) (Stand? Frame And Adjuster)(#10001-10010)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Right Stand) (Stand? Frame And Adjuster)(#10011-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 15 |
| 01***30 | Bolt,(With Body Positioner) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Travel Lever) (1 Actuator)(#10001-10043)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Travel Lever) (1 Actuator)(#10044-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Travel Lever) (For Additional Piping) (2 Actuator)(#10011-10043)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***25 | Bolt | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Travel Lever) (For Additional Piping) (2 Actuator)(#10044-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Travel Lever)(#10001-10043)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Frame (Travel Lever)(#10044-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 14 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Mat
| 20***82 | Mat,Floor | 1 |
| 20***83 | Floor Mat | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Mat (For Additional Piping) (1 Actuator)
| 20***82 | Mat,Floor | 1 |
| 20***83 | Mat | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Floor Mat (For Additional Piping) (2 Actuator)
| 20***20 | Mat,Floor | 1 |
| 20***21 | Floor Mat | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Front Guard (Full)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 10 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***75 | Bolt - Tube Mounting | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Front Guard (Half) (Lower)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 20***91 | Guard | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Garnish Cover
| 01***20 | Screw | 4 |
| 01***12 | Screw,(Not Shown) (For Std Cab) | 6 |
| 20***30 | Washer | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Head Guard
| 01***65 | Bolt,(Used With Pin Puller) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Heater Less Plug
| 01***12 | Screw,(For Fixed Type Ripper) | 4 |
| 01***08 | Washer,(For Fixed Type Ripper) | 4 |
| 07***59 | Clamp,See Fig. K4010-05a0 | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Low Mount (Floor Frame)(#10001-10043)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 16 |
| 01***13 | Nut,(For Adjustable Rod) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Low Mount (Floor Frame)(#10044-)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 16 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Base) (Work Lever With Ppc Valve) (Electric Governor Control)(#10001-10010)
| 01***25 | Screw | 2 |
| 01***10 | Bolt - Relay And Flasher Mounting | 7 |
| 01***30 | Bolt,See Fig. K4010-17a0 | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Base) (Work Lever With Ppc Valve) (Electric Governor Control)(#10011-)
| 01***25 | Screw | 2 |
| 01***10 | Bolt - Relay And Flasher Mounting | 5 |
| 01***30 | Bolt,See Fig. K4010-17a0 | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab? Grip And Open Lock)
| 01***16 | Bolt | 3 |
| 01***20 | Bolt | 8 |
| 01***20 | Bolt | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab? Grip And Open Lock) (With Guard)
| 01***18 | Bolt,(Without Head Guard) | 6 |
| 01***16 | Bolt | 3 |
| 01***20 | Bolt | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door Lock)
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw | 3 |
| 01***20 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door Lock) (For Vandalism Protection)
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw | 3 |
| 01***20 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door)
| 01***25 | Bolt | 12 |
| 01***25 | Bolt | 12 |
| 14***30 | Hinge (Welded) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door) (For Vandalism Protection)
| 01***25 | Bolt | 12 |
| 01***25 | Bolt | 12 |
| 14***30 | Hinge (Welded) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Electrical)
| 01***20 | Screw (Not Illustrated) | 4 |
| 01***20 | Screw | 1 |
| 01***20 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Front Window)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 4 |
| 01***12 | Screw,(See Fig. K0210-16a0) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Inside Cover)
| 01***12 | Screw,Sems | 4 |
| 01***25 | Screw | 2 |
| 01***12 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Installation Parts)(#10001-10043)
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***75 | Bolt - Tube Mounting | 4 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Monitor Panel) (English)
| 78***10 | Bulb - 1.4 Watt | 2 |
| 78***02 | Monitor | 1 |
| 78***01 | Monitor Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Panel Cover And Monitor System) (Electric Governor)
| 01***08 | Screw - Clip Mounting | 4 |
| 01***12 | Screw,(Not Shown) (For Std Cab) | 8 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Panel Cover) (Electric Governor Control)
| 01***08 | Screw | 5 |
| 01***10 | Screw | 9 |
| 01***10 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Panel Cover) (Electric Governor Control) (With Heater)
| 01***08 | Screw | 5 |
| 01***10 | Screw | 9 |
| 01***10 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Panel Cover) (Electric Governor Control) (Without Air Conditioner)
| 01***08 | Screw | 5 |
| 01***10 | Screw | 9 |
| 01***10 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Panel) (Radio And Harness) (Electric Governor)
| 01***08 | Screw | 5 |
| 01***10 | Screw | 7 |
| 01***12 | Screw,(For Fixed Type Ripper) | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Panel) (Without Radio) (Electric Governor)
| 01***08 | Screw | 5 |
| 01***10 | Screw | 3 |
| 01***12 | Screw,(For Fixed Type Ripper) | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Terminal Bracket)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 08***36 | Band,(For 2nd Travel Speed) (Op) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Terminal Bracket) (Without Air Conditioner)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***12 | Screw,(For Fixed Type Ripper) | 4 |
| 01***60 | Washer,Lock | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Window And Roof Ventilator)
| 01***16 | Screw | 2 |
| 01***16 | Screw | 4 |
| 01***10 | Bolt | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Cab (With Guard) (Cab? Grip And Open Lock) (For Vandalism Protection)
| 01***16 | Bolt | 3 |
| 01***20 | Bolt | 8 |
| 01***20 | Bolt | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Tilt)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***20 | Screw | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Tilt) (Suspension Type)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***20 | Screw | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Seat Stand (Rigid Type)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 20***10 | Stand | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Operator'S Seat Stand (Suspension Type)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 20***20 | Stand | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Ppc Work Line Cliping
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Ppc Work Line Cliping (1 Actuator)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Seat Belt (For Rigid Type) (50mm Wide)
| 01***45 | Bolt,(With Water Separator Type) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Seat Belt (For Rigid Type) (78mm Wide)
| 01***45 | Bolt,(With Water Separator Type) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Seat Belt (For Suspension Type) (50mm Wide)
| 01***45 | Bolt,(With Water Separator Type) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Seat Belt (For Suspension Type) (78mm Wide)
| 01***45 | Bolt,(With Water Separator Type) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Seat Rear Cover (Speaker Less)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***08 | Screw | 16 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Seat Rear Cover (With Heater)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***08 | Screw | 16 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Seat Rear Cover (With Speaker)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***08 | Screw | 16 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Switch (Model Selection Connector)
| 08***14 | Band,(For Additional Fuel Strainer) | 1 |
| 08***81 | Connector | 1 |
| 20***41 | Switch | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Operator'S Compartment And Control System : Window Washer
| 01***16 | Bolt - Box Mounting | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Sa6d102e-1c Engine S/N 26200467-Up
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : After Cooler And Air Connector(#26201322-26203637)
| 07***08 | Plug,(Without Auto Priming System) | 1 |
| 67***30 | Plug, Pipe (1/8 Nptf) | 3 |
| 67***10 | Clamp, Hose | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : After Cooler And Air Connector(#26203638-)
| 07***08 | Plug,(Without Auto Priming System) | 1 |
| 67***30 | Plug, Pipe (1/8 Nptf) | 3 |
| 67***10 | Clamp, Hose | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : After Cooler Cover
| 20***40 | Cover,(For Slag Handling) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : After Cooler Water Piping (With Corrosion Resistor)(#26200467-26232197)
| 07***89 | Clamp,(For Japan) | 6 |
| 07***59 | Clamp - Drain Hose | 6 |
| 20***40 | Cover,(For Slag Handling) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : After Cooler Water Piping (With Corrosion Resistor)(#26232198-)
| 07***89 | Clamp,(For Japan) | 6 |
| 20***40 | Cover,(For Slag Handling) | 1 |
| 67***41 | Hose | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Aftercooler Water Piping(#26200467-26280462)
| 07***12 | Gasket,(Without Air Compressor Type) (K1) | 1 |
| 07***09 | Plug,(For 2-Actuater Attachment) | 1 |
| 07***89 | Clamp,(For Japan) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Aftercooler Water Piping(#26280463-)
| 07***89 | Clamp,(For Japan) | 6 |
| 67***40 | Hose | 1 |
| 67***50 | Tube | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Air Cleaner (Forwarded Individually Parts)(#26201322-26256917)
| 60***90 | Valve,Dust | 1 |
| 60***40 | Element Assembly, Innner And Outer Air Cleaner | 1 |
| 60***20 | Element Assembly, Outer | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Air Cleaner (Forwerded Individually Parts)(#26256918-)
| 60***90 | Valve,Dust | 1 |
| 60***40 | Element Assembly, Innner And Outer Air Cleaner | 1 |
| 60***20 | Element Assembly, Outer | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Air Intake Heater
| 67***10 | Plug, Pipe (1/2-14 Npt) | 1 |
| 67***10 | Gasket, Intake Manifold Cover | 1 |
| 67***11 | Gasket, Int Manifold Cover | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator (35a) (Brushless Type) (Inner Parts)(#26200467-26239398)
| 60***11 | Alternator A. (35a) | 1 |
| KD***70 | Bushing,Insulate | 1 |
| KD***50 | Regulator Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator (35a) (Brushless Type) (Inner Parts)(#26239399-)
| 60***11 | Alternator A. (35a) | 1 |
| KD***70 | Bushing,Insulate | 1 |
| KD***50 | Regulator Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator (35a) (Brushless Type)(#26200467-26239398)
| (6***1) | Alternator A. (35a),(See Fig.A601p-02a7z) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator (35a) (Brushless Type)(#26239399-)
| (6***1) | Alternator A. (35a),(See Fig.A601p-02a7z) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator (35a) (Inner Parts)(#26201322-)
| 60***10 | Alternator A. (35a),(See Fig.A601p-02a1) | 1 |
| ND***10 | Cover,Rear | 1 |
| ND***30 | Collar,Stud | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator (35a)(#26201322-)
| 60***10 | Alternator A. (35a),(See Fig.A601p-02a1) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator (60a) (Inner Parts)(#26201322-)
| 60***10 | Alternator A. (60a),(See Fig.A601p-02a2) | 1 |
| ND***80 | Screw | 4 |
| ND***30 | Collar,Stud | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator (60a)(#26201322-)
| 60***10 | Alternator A. (60a),(See Fig.A601p-02a2) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator Bracket (35a Brushless Type)(#26200467-26239398)
| 01***30 | Bolt,(For Trimming Dozer) | 1 |
| 01***10 | Nut,(Without Air Conditioner) | 1 |
| 01***23 | Washer,(With Car Heater) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator Bracket (35a Brushless Type)(#26239399-)
| 01***30 | Bolt,(For Trimming Dozer) | 1 |
| 01***10 | Nut,(Without Air Conditioner) | 1 |
| 01***23 | Washer,(With Car Heater) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator Bracket(#26201322-)
| 01***95 | Bolt (M10-1.50x95) | 1 |
| 01***16 | Washer,(For Shipping Parts) | 1 |
| 67***60 | Bolt, Mounting (M8-1.25x25) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Alternator Drive Pulley(#26201322-)
| 67***20 | Support Ass'Y | 1 |
| 67***70 | Bolt, Mounting (M8-1.25x40) | 4 |
| 67***10 | Hub, Fan | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Belt Tensioner (For 35a Alternator)(#26201322-)
| 67***10 | Tensioner,Belt | 1 |
| 67***60 | Bolt, Mounting (M8-1.25x25) | 1 |
| 67***20 | Bolt (M10x1.50x70) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Belt Tensioner (For 35a Brushless Alternator)(#26201322-)
| 67***40 | Tensioner,Belt | 1 |
| 67***41 | Tensioner, Alternator Belt | 1 |
| 67***30 | Tensioner, Alternator Belt | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Breather Hose(#26201322-)
| 01***25 | Bolt,(With Corrosion Resistor) | 1 |
| 07***20 | Clamp, Spring Hose | 1 |
| 07***78 | Hose | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Camshaft
| 67***20 | Support, Camshaft Thrust | 1 |
| 67***31 | Gear, Camshaft | 1 |
| 67***60 | Bolt (M8x1.25x22) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Caution Plate (Arabic)(#26201322-26257428)
| 09***63 | Plate? Instruction,(For Arabic) | 1 |
| 67***11 | Plate? Name | 1 |
| 67***60 | Plate? Name | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Caution Plate (Chinese)(#26201322-26257428)
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
| 67***11 | Plate? Name | 1 |
| 67***30 | Plate? Name | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Caution Plate (English)(#26201322-26257428)
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
| 67***11 | Plate? Name | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Caution Plate (Japanese) (Ordering Transferred Parts)(#26256616-)
| 09***63 | Plate? Instruction,Air Cleaner (Double Element) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Caution Plate (Japanese-Emglish)(#26260760-)
| 67***20 | Plate? Name | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Caution Plate (Japanese-English)(#26235571-26257428)
| 09***61 | Plate? Instruction,(Japanese-English) (Not Shown) | 1 |
| 09***63 | Plate? Instruction,Air Cleaner (Double Element) | 1 |
| 67***20 | Plate? Name | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Caution Plate (Russian)(#26201322-26257428)
| 09***63 | Plate? Instruction,Air Cleaner | 1 |
| 67***11 | Plate? Name | 1 |
| 67***80 | Plate? Name | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Caution Plate (Spanish)(#26201322-26257428)
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
| 67***11 | Plate? Name | 1 |
| 67***40 | Plate? Name | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Ceramic Muffler Related Parts (Forwarded Individually Parts)(#26219581-26257420)
| 07***45 | Hose | 1 |
| 61***70 | Tube | 1 |
| 61***10 | Monitor Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Cooling Fan(#26201322-)
| 01***30 | Bolt,(Water Separator Spec.) | 6 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 6 |
| 01***30 | Bolt,(Water Separator Spec.) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Corrosion Resistor
| 01***16 | Bolt, Mount Solenoid Valve | 1 |
| 01***40 | Bolt,(Shim 3-Piece) | 4 |
| 01***80 | Bolt (M10-1.50x80) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Crank Pulley (Hardening) (Modified Belt Spec.)(#26222673-)
| 01***90 | Bolt,(For Large Fan) | 4 |
| 67***11 | Spacer | 1 |
| 67***10 | V-Belt,Fan | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Crank Pulley (Hardening)(#26201322-26228580)
| 01***90 | Bolt,(For Large Fan) | 4 |
| 04***45 | V-Belt Set,Fan | 1 |
| 67***11 | Spacer | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Crank Pulley (Hardening)(#26228581-)
| 01***90 | Bolt,(For Large Fan) | 4 |
| 67***11 | Spacer | 1 |
| 67***10 | V-Belt,Fan | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Crank Pulley (Modified Belt Spec.)(#26222673-)
| 01***90 | Bolt,(For Large Fan) | 4 |
| 67***11 | Spacer | 1 |
| 67***10 | V-Belt,Fan | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Crank Pulley(#26201322-26228580)
| 01***90 | Bolt,(For Large Fan) | 4 |
| 04***45 | V-Belt Set,Fan | 1 |
| 67***11 | Spacer | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Crank Pulley(#26228581-)
| 01***90 | Bolt,(For Large Fan) | 4 |
| 67***11 | Spacer | 1 |
| 67***10 | V-Belt,Fan | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Crankshaft
| 67***50 | Gear, Crankshaft | 1 |
| 67***11 | Gear, Crankshaft | 1 |
| 67***10 | Crankshaft Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Cylinder Block Blind Cover(#26241445-)
| 67***20 | Bolt, Flange (M8-1.25x20) | 2 |
| 67***10 | Gasket, Cover Plate | 1 |
| 67***11 | Gasket, Cover Plate | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Cylinder Block Blind Plate(#26201322-26241444)
| 67***20 | Bolt, Flange (M8-1.25x20) | 2 |
| 67***10 | Gasket, Cover Plate | 1 |
| 67***60 | Gasket | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Cylinder Block Blind Plug(#26201322-)
| 67***60 | Plug, Expansion (Not Used With Side Oil Fill) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Cylinder Block(#26200467-26228573)
| 67***20 | Plug, Pipe (3/4 Nptf) | 1 |
| 67***30 | Plug, Pipe (1/8 Nptf) | 2 |
| 67***90 | Nozzle, Piston Cooling | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Cylinder Block(#26228574-)
| 62***10 | Screw | 1 |
| 62***10 | Seal, O-Ring (M10-1.00) | 3 |
| 67***70 | Cylinder Block Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Cylinder Head(#26201322-)
| 67***70 | Head Ass'Y | 1 |
| 67***10 | Retainer, Exhaust Valve Spring | 12 |
| 67***70 | Insert, Exhaust | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Damper
| 67***20 | Bolt (M12x1.25x36) | 4 |
| 67***20 | Damper, Rubber Vibration | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Damper (Ordering Transferded Parts)(#26281429-)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 20***20 | Pin | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Exhaust Connector Clamp
| 67***20 | Clamp,Turbocharger Outlet Pipe | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Exhaust Manifold Gasket
| 67***30 | Bolt, Mounting (M10x1.50x65) | 12 |
| 67***20 | Gasket, Exhaust Manifold | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Exhaust Manifold(#26201322-)
| 67***20 | Manifold,Exhaust | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fan Belt Tension Pulley (With Hardening Pulley)(#26201322-26253450)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 2 |
| 01***10 | Bolt | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fan Belt Tension Pulley (With Hardening Pulley)(#26253451-)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fan Belt Tension Pulley(#26201322-26253960)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 2 |
| 01***10 | Bolt | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fan Belt Tension Pulley(#26253961-)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fan Drive Pulley And Air Conditioner Drive Pulley (With Hardening Pulley)(#26201322-)
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***16 | Bolt,(With Alternator Cover Type) | 4 |
| 67***30 | Pulley,Hardening | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fan Drive Pulley And Air Conditioner Drive Pulley(#26201322-)
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***16 | Bolt,(With Alternator Cover Type) | 4 |
| 67***10 | Pulley,Air Conditioner | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fan Drive(#26201322-)
| 01***50 | Screw | 2 |
| 01***80 | Screw | 2 |
| 06***05 | Bearing, Ball | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Flywheel Housing Plug And Revolution Sensor(#26201322-)
| 01***25 | Bolt - Relay Mounting | 1 |
| 02***13 | Plug | 1 |
| 61***90 | Spacer | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Flywheel Housing(#26201322-26239404)
| 67***10 | Housing,Flywheel | 1 |
| 67***20 | Bolt (M8-1.25x16) | 2 |
| 67***30 | Plate, Cover | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Flywheel Housing(#26239405-26253960)
| 67***10 | Housing,Flywheel | 1 |
| 67***20 | Bolt (M8-1.25x16) | 2 |
| 67***30 | Plate, Cover | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Flywheel Housing(#26253961-)
| 02***13 | Plug | 1 |
| 67***40 | Cover, Rear | 1 |
| 67***11 | Housing,Flywheel | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Flywheel(#26201322-26214414)
| 67***20 | Washer, Plain (M12) | 8 |
| 67***30 | Bolt (M12x1.25x32) | 8 |
| 67***80 | Gear, Flywheel Ring | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Flywheel(#26214415-)
| 67***20 | Washer, Plain (M12) | 8 |
| 67***30 | Bolt (M12x1.25x32) | 8 |
| 67***80 | Gear, Flywheel Ring | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Front Cover(#26200467-26239398)
| 67***40 | Pin, Timing | 1 |
| 67***50 | Ring, Retaining | 1 |
| 67***60 | Screw, Round Head (M5-0.80x17) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Front Cover(#26239399-)
| 67***40 | Pin, Timing | 1 |
| 67***50 | Ring, Retaining | 1 |
| 67***60 | Screw, Round Head (M5-0.80x17) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Front Gear Train Cover(#26200467-26264845)
| 67***80 | Gasket, Accessory Drive Cover | 1 |
| 67***10 | Plate, Accessory Drive Cover | 1 |
| 67***30 | Bolt, Flange Head (M12-1.75x25) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Front Gear Train Cover(#26264825-)
| 07***10 | O-Ring,(F4320-67a0 -4 ) | 1 |
| 67***30 | Cover | 1 |
| 67***30 | Bolt, Flange Head (M12-1.75x25) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Filter Mounting And Piping(#26201322-26291074)
| 01***20 | Bolt,See Fig. K4010-11a0 | 1 |
| 01***14 | Bolt,(W/Joy Stick Str.)(W/O Heater) | 1 |
| 01***30 | Bolt,(Water Separator Spec.) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Filter Mounting And Piping(#26291075-)
| 01***20 | Bolt,See Fig. K4010-11a0 | 1 |
| 01***14 | Bolt,(W/Joy Stick Str.)(W/O Heater) | 1 |
| 01***30 | Bolt,(Water Separator Spec.) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Filter(#26201322-)
| 67***10 | Cartridge,Fuel | 1 |
| 67***11 | Filter, Fuel - Secondary | 1 |
| 67***20 | Head | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Feed Pump) (For Regulation Of Epa) (Inner Parts)(#26237143-)
| DK***20 | Bolt, Joint | 1 |
| DK***60 | Feed Pump Ass'Y | 1 |
| DK***00 | Valve,Check | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Feed Pump) (Inner Parts)(#26201322-)
| DK***20 | Bolt, Joint | 1 |
| DK***60 | Feed Pump Ass'Y | 1 |
| DK***00 | Valve,Check | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Governor) (1/2) (For Regulation Of Epa) (Inner Parts)(#26237143-)
| DK***00 | Washer | 1 |
| DK***00 | Shim? 2.00mm,(High Altitude Spec.) | 0 |
| DK***00 | Shim | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Governor) (1/2) (Inner Parts)(#26201322-)
| DK***00 | Shim? 2.00mm,(High Altitude Spec.) | 0 |
| DK***00 | Gasket | 1 |
| DK***40 | Gasket | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Governor) (2/2) (For Regulation Of Epa) (Inner Parts)(#26237143-)
| DK***00 | Gasket | 1 |
| DK***40 | Gasket,Air Compressor | 2 |
| DK***20 | Lever | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Governor) (2/2) (Inner Parts)(#26201322-)
| DK***00 | Gasket | 1 |
| DK***40 | Gasket,Air Compressor | 2 |
| DK***20 | Lever | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Pump) (1/2) (For Regulation Of Epa) (Inner Parts)(#26237143-)
| 67***60 | Injection Pump Ass'Y | 1 |
| DK***30 | Bearing | 0 |
| DK***20 | Shim, 1.40mm; Was Dk029311-7220, Shim? 1.4mm | 0 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Pump) (1/2) (Inner Parts)(#26201322-)
| 67***31 | Injection Pump Ass'Y | 1 |
| DK***30 | Bearing | 0 |
| DK***20 | Shim, 1.40mm; Was Dk029311-7220, Shim? 1.4mm | 0 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Pump) (2/2) (For Regulation Of Epa) (Inner Parts)(#26237143-)
| DK***40 | Shim? 0.50mm, Shim, 0.50mm; Was Dk029311-0040 | 0 |
| DK***90 | Shim? 0.25mm, Shim, 0.25mm; Was Dk029311-0590 | 0 |
| DK***00 | Sleeve,Control | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump (Pump) (2/2) (Inner Parts)(#26201322-)
| DK***40 | Shim? 0.50mm, Shim, 0.50mm; Was Dk029311-0040 | 0 |
| DK***90 | Shim? 0.25mm, Shim, 0.25mm; Was Dk029311-0590 | 0 |
| DK***00 | Sleeve,Control | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump And Oil Piping (For Reguration Of Epa)(#26237143-)
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 5 |
| 07***10 | Screw, Banjo Connector (M10-1.25x20) | 1 |
| 62***10 | Seal, O-Ring (M10-1.00) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump And Oil Piping(#26201322-)
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 2 |
| 07***10 | Screw, Banjo Connector (M10-1.25x20) | 1 |
| 61***40 | Nipple | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump Mounting And Gear(#26265208-)
| 01***14 | Bolt - Fuel Sensor Mounting | 2 |
| 01***11 | Nut (M14-1.50 Thd), Nut; Was 01582-01411 | 1 |
| 61***61 | Washer, Plain (14mm) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Injection Pump Mounting(#26200467-26265207)
| 01***14 | Bolt - Fuel Sensor Mounting | 2 |
| 01***11 | Nut (M14-1.50 Thd), Nut; Was 01582-01411 | 1 |
| 61***61 | Washer, Plain (14mm) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Inlet Tube And Outlet Joint(#26201322-26201323)
| 01***40 | Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 07***40 | Hose,See Fig. K4010-05a0 | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Inlet Tube And Outlet Joint(#26201324-)
| 01***45 | Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 07***40 | Hose,See Fig. K4010-05a0 | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Return(#26201322-26291074)
| 01***16 | Bolt, Mount Solenoid Valve | 1 |
| 01***35 | Bolt, Mount Bracket To Floor | 1 |
| 01***60 | Bolt, Mount | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Fuel Return(#26291075-)
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
| 04***08 | Clip | 1 |
| 21***30 | Spacer | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Head Cover(#26201322-26234415)
| 61***10 | Cap, Oil Filler | 1 |
| 67***30 | Bolt (M8x1.25x25) | 6 |
| 67***50 | Washer, Plain (3/8 Inch) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Head Cover(#26234416-)
| 67***30 | Bolt (M8x1.25x25) | 6 |
| 67***50 | Washer, Plain (3/8 Inch) | 6 |
| 67***81 | Gasket, Valve Cover | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield (Tunnel Spec.) (Ceramic Type)(#26219581-26234415)
| 01***35 | Stud | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield (Tunnel Spec.) (Ceramic Type)(#26234416-26249293)
| 01***35 | Stud | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield (Tunnel Spec.) (Ceramic Type)(#26249275-26257428)
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield (Tunnel Spec.) (Ceramic Type)(#26249294-26249536)
| 01***35 | Stud | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield (Tunnel Spec.) (Ceramic Type)(#26249537-26254289)
| 01***35 | Stud | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield (Tunnel Spec.) (Ceramic Type)(#26249537-26257428)
| 01***35 | Stud | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield (Tunnel Spec.) (Ceramic Type)(#26257429-) : Unit_01_of_02
| 01***35 | Stud | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield (Tunnel Spec.) (Ceramic Type)(#26257429-) : Unit_02_of_02
| 01***35 | Stud | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield(#26201322-26221371)
| 01***16 | Bolt, Mount Solenoid Valve | 8 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 4 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield(#26221372-26234415)
| 01***35 | Stud | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heat Shield(#26234416-)
| 01***35 | Stud | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 6 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heater Switch (Forwerded Individually Parts)(#26256916-)
| 60***70 | Switch,Air Intake Heater | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heater Switch (Ordering Transferred Parts)(#26256616-)
| 60***70 | Switch,Air Intake Heater | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Heater Switch(#26212234-26257428)
| 60***70 | Switch,Air Intake Heater | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Injection Nozzle(#26200469-26255462)
| 67***40 | Nozzle | 1 |
| 67***00 | Nozzle Holder Ass'Y | 6 |
| 67***50 | Seal, Rectangular Ring | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Injection Nozzle(#26255463-)
| 67***20 | Injector | 1 |
| 67***40 | Nozzle | 1 |
| 67***00 | Nozzle Holder Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Injection Piping(#26201322-26237142)
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
| 67***80 | Seal, Grommet | 1 |
| 67***90 | Valve, Check (M8x1.25x17.5) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Injection Piping(#26237143-26291074)
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
| 67***80 | Seal, Grommet | 1 |
| 67***90 | Valve, Check (M8x1.25x17.5) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Injection Piping(#26291075-)
| 67***40 | Screw, Banjo Connector (M6x1.00x14.3) | 6 |
| 67***60 | Gasket,Injector - Spill | 12 |
| 67***20 | Bolt, Captive Washer Cap (M5-0.80x24.5) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Main Pump Bracket (Ordering Transferded Parts)(#26281429-)
| 01***40 | Bolt (Op) | 10 |
| 01***80 | Bolt,(With Corrosion Resistor) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Muffler (Ceramic Type)(#26219581-)
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 18 |
| 01***08 | Nut,See Fig. K4010-04a0 | 18 |
| 07***08 | Plug,(Without Auto Priming System) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Muffler Drain Tube (Forwarded Individually Parts)(#26256616-)
| 62***80 | Tube,(Forwarded Individually Parts) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Muffler Tube And Hose (Ordering Transferded Parts)(#26281429-)
| 07***50 | Hose, Right | 1 |
| 07***55 | Clip,94 | 1 |
| 62***80 | Tube,(Forwarded Individually Parts) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Muffler(#26201322-26221371)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 2 |
| 01***08 | Nut, Accumulator Mounting | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Muffler(#26221372-)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 2 |
| 01***08 | Nut, Accumulator Mounting | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Muffler(#26257435-)
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
| 01***35 | Bolt,R.H. (For Add. Air Compressor) | 2 |
| 01***08 | Nut, Accumulator Mounting | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Cooler And Oil Filter
| 67***50 | Valve, Pressure Relief | 1 |
| 67***51 | Valve, Pressure Relief | 1 |
| 67***30 | Plug, Pipe (1/8 Nptf) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Filler(#26234416-)
| 01***20 | Bolt,(Forwarded Individually Parts) | 5 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Levl Sensor And Oil Level Gauge(#26201322-)
| 01***12 | Bolt,(See Fig. K0210-16a0) | 3 |
| 01***12 | Bolt,(With Speedometer) | 1 |
| 01***14 | Bolt - Fuel Sensor Mounting | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Pan And Suction Tube(#26201322-)
| 09***50 | Liquid Gasket, Lg-7, 150g | 0 |
| 67***60 | Bolt, Mounting (M8-1.25x25) | 2 |
| 67***10 | Gasket (K2) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Pan Bolt(#26201322-)
| 67***10 | Bolt, Mounting (M8-1.25 X 25) | 36 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Pressure Switch (Cold Terrain Spec.)(#26201322-26228573)
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 2 |
| 67***30 | Cartridge, Engine Oil Filter | 2 |
| 67***40 | Switch,Oil Pressure | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Pressure Switch (Cold Terrain Spec.)(#26228574-)
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 2 |
| 08***05 | Switch,Engine Oil Pressure | 1 |
| 62***10 | Seal, O-Ring (M10-1.00) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Pressure Switch(#26200467-26217579)
| 67***30 | Cartridge, Engine Oil Filter | 2 |
| 67***40 | Switch,Oil Pressure | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Pressure Switch(#26217580-)
| 08***05 | Switch,Engine Oil Pressure | 1 |
| 62***10 | Seal, O-Ring (M10-1.00) | 1 |
| 67***30 | Cartridge, Engine Oil Filter | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Pump(#26200467-26273534)
| 67***11 | Pump, Lubricating Oil | 1 |
| 67***20 | Bolt (M8x1.25x30) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Oil Pump(#26273535-)
| 67***11 | Pump, Lubricating Oil | 1 |
| 67***20 | Bolt (M8x1.25x30) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Piston
| 67***00 | Piston Ring Ass'Y | 6 |
| 67***10 | Pin, Piston | 6 |
| 67***20 | Ring, Retaining | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Pre-Fuel Filter (Forwarded Individually Parts)(#26256616-)
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
| 60***01 | Fuel Filter Ass'Y | 1 |
| 60***21 | Cartridge,Fuel Filter | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Pre-Fuel Filter(#26201322-26257431)
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
| 60***01 | Fuel Filter Ass'Y | 1 |
| 60***21 | Cartridge,Fuel Filter | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Rear Hanger(#26201322-26291070)
| 67***20 | Bolt (M12x1.75x30) | 2 |
| 67***10 | Bracket, Lifting | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Rear Hanger(#26291071-)
| 67***10 | Bracket, Lifting | 1 |
| 67***20 | Bolt (M12x1.75x30) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Repair Parts (1/4) (Cylinder Head)
| 67***40 | Gasket, Cylinder Head - 0.5mm Os | 1 |
| 67***70 | Gasket, Cylinder Head - 0.25mm Os | 1 |
| 67***51 | Gasket? 0.50mm,Head | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Repair Parts (2/4) (Cylinder Block)
| 67***10 | Bushing, Oversize (No. 1 Bore) | 1 |
| 67***20 | Bushing, Oversize (No. 2-5 Bore) | 1 |
| 67***10 | Sleeve, Salvage - Std Bore | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Repair Parts (3/4) (Crankshaft)
| 67***00 | Main Metal Ass'Y | 6 |
| 67***00 | Main Metal Ass'Y | 6 |
| 67***00 | Main Metal Ass'Y | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Repair Parts (4/4) (Piston)
| 67***00 | Piston Ring Ass'Y | 6 |
| 67***00 | Piston Ring Ass'Y | 6 |
| 67***20 | Piston? 0.5mm | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Rocker Arm
| 67***70 | Screw, Slotted Set (3/8-24x1 1/2 Inch) | 2 |
| 67***40 | Bolt | 6 |
| 67***10 | Rod, Push | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Spare Parts (For 35a Brushless Alternator) (Ordering Transferred Parts)(#26273539-)
| 07***16 | Gasket,(For Pc750-6) (See Fig.A2110) | 1 |
| 67***81 | Gasket, Valve Cover | 6 |
| 67***10 | Gasket,Camfollower Cover Bolt | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Spare Parts (For 35a Brushless Alternator)(#26201322-26228580)
| 04***45 | V-Belt Set,Fan | 1 |
| 07***16 | Gasket,(For Pc750-6) (See Fig.A2110) | 1 |
| 67***81 | Gasket, Valve Cover | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Spare Parts (For 35a Brushless Alternator)(#26228581-26273538)
| 07***16 | Gasket,(For Pc750-6) (See Fig.A2110) | 1 |
| 67***81 | Gasket, Valve Cover | 6 |
| 67***10 | Gasket,Camfollower Cover Bolt | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Spare Parts(#26201322-26228580)
| 04***45 | V-Belt Set,Fan | 1 |
| 07***16 | Gasket,(For Pc750-6) (See Fig.A2110) | 1 |
| 67***81 | Gasket, Valve Cover | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Spare Parts(#26228581-26273538)
| 07***16 | Gasket,(For Pc750-6) (See Fig.A2110) | 1 |
| 67***81 | Gasket, Valve Cover | 6 |
| 67***10 | Gasket,Camfollower Cover Bolt | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Spere Parts (Ordering Transferred Parts)(#26273539-)
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor (4.5kw) (Inner Parts)(#26201322-26239543)
| 60***10 | Starting Motor Ass'Y,(4.5kw) | 1 |
| ND***82 | Yoke Assembly | 1 |
| ND***00 | Washer, Felt | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor (4.5kw) (Inner Parts)(#26239544-)
| 60***10 | Starting Motor Ass'Y,(4.5kw) | 1 |
| ND***82 | Yoke Assembly | 1 |
| ND***00 | Washer, Felt | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor (4.5kw)(#26201322-26239543)
| (6***0) | Starting Motor Ass'Y,(4.5kw) (See Fig.A621p-02a2) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor (4.5kw)(#26239544-)
| (6***0) | Starting Motor Ass'Y,(4.5kw) (See Fig.A621p-02a2) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor (5.5kw)
| (6***0) | Starting Motor Ass'Y,(5.5kw) (See Fig.A621p-02a1) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor (5.5kw) (Inner Parts)
| 60***10 | Starting Motor Ass'Y,(See Fig.A621p-02a1) | 1 |
| ND***80 | Holder Ass'Y,Brush | 1 |
| ND***00 | Brush Ass'Y | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor Mounting (4.5kw)(#26237143-)
| 01***35 | Bolt, Mount Bracket To Floor | 2 |
| 67***11 | Gasket,Starter | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor Mounting (5.5kw)(#26201322-26237142)
| 67***11 | Gasket,Starter | 1 |
| 67***20 | Bolt, Mounting (M10x1.50x35) | 3 |
| 67***10 | Bolt (M10x1.50x35) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor Mounting (5.5kw)(#26237143-26247492)
| 01***40 | Bolt | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 67***11 | Gasket,Starter | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor Mounting (5.5kw)(#26247493-)
| 01***30 | Stud | 1 |
| 01***35 | Bolt, Mount Bracket To Floor | 2 |
| 01***08 | Nut,See Fig. K4010-04a0 | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Starting Motor Mounting(#26201322-26237142)
| 67***11 | Gasket,Starter | 1 |
| 67***20 | Bolt, Mounting (M10x1.50x35) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Tachometer Drive Cover
| 67***90 | Cover, Mechanical Tach Drive | 1 |
| 67***20 | Seal, Rectangular Ring | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Tappet
| 67***12 | Tappet, Valve | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Tappet Cover(#26200467-26232115)
| 67***20 | Bolt, Mounting (M8-1.25x16) | 6 |
| 67***80 | Seal, Grommet | 6 |
| 67***60 | Cover, Push Rod | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Tappet Cover(#26232116-26291074)
| 67***20 | Bolt, Mounting (M8-1.25x16) | 6 |
| 67***80 | Seal, Grommet | 6 |
| 67***60 | Cover, Push Rod | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Tappet Cover(#26291075-)
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Thermostat Housing(#26201322-)
| 07***25 | Clip,(For Slag Handling) | 2 |
| 67***40 | Bolt, (M8x1.25x35) | 1 |
| 67***71 | Coupling | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Thermostat(#26200467-26295857)
| 67***71 | Thermostat | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Thermostat(#26295858-)
| 67***71 | Thermostat | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Turbocharger Mounting(#26200467-26233099)
| 67***10 | Stud ((M10x1.50 (Both Ends) X42)) | 4 |
| 67***20 | Nut (M10x1.50) | 4 |
| 67***30 | Gasket, Turbocharger Mounting | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Turbocharger Mounting(#26233100-)
| 67***10 | Stud ((M10x1.50 (Both Ends) X42)) | 4 |
| 67***20 | Nut (M10x1.50) | 4 |
| 67***31 | Kit,Turbocharger | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Turbocharger Oil Piping(#26201322-)
| 67***80 | Connector, Male | 2 |
| 67***30 | O-Ring,Turbocharger Drain | 2 |
| 67***10 | Tube,Oil | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Under Plate
| 67***50 | Plate | 1 |
| 67***51 | Plate, Cylinder Block Stiffener | 1 |
| (0***0) | Liquid Gasket, Lg-7, 150g | 0 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Connector
| 67***60 | Connection, Water Inlet | 1 |
| 67***10 | Connector | 1 |
| 67***20 | Bolt (M10-1.50x75) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Connector Plug
| 67***10 | Plug, Pipe (1/2-14 Npt) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Pump (With Hardeing Pulley)(#26200467-26279456)
| 67***60 | Bolt (M8x1.25x22) | 2 |
| 67***00 | Water Pump Ass'Y | 1 |
| 67***01 | Water Pump Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Pump (With Non Hardeing Pulley)(#26201322-26274900)
| 67***60 | Bolt (M8x1.25x22) | 2 |
| 67***00 | Water Pump Ass'Y | 1 |
| 67***01 | Water Pump Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Pump(#26274901-)
| 67***60 | Bolt (M8x1.25x22) | 2 |
| 67***02 | Water Pump Ass'Y | 1 |
| 67***20 | Seal, Rectangular Ring | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Pump(#26279457-)
| 67***60 | Bolt (M8x1.25x22) | 2 |
| 67***02 | Water Pump Ass'Y | 1 |
| 67***20 | Seal, Rectangular Ring | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Separater(#26201322-26257431)
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
| 60***31 | Separator Assembly, Water | 1 |
| 60***60 | Plug,Drain (4d105-5h? 4d105-5t) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Separator (Forwarded Individually Parts)(#26256616-)
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
| 60***90 | O-Ring | 1 |
| 60***32 | Water Separator A | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Temperature Sensor (Cold Terrain Spec.)(#26201322-)
| 01***16 | Bolt, Mount Solenoid Valve | 1 |
| 01***16 | Screw | 1 |
| 08***10 | Clip,(Without Ripper) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Water Temperature Sensor(#26201322-)
| 01***16 | Bolt, Mount Solenoid Valve | 1 |
| 01***16 | Screw | 1 |
| 08***10 | Clip,(Without Ripper) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Wiring Harness (For 35a Brushlees Alternator)(#26201322-)
| 01***14 | Bolt - Fuel Sensor Mounting | 1 |
| 01***80 | Bolt (M10-1.50x80) | 1 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Wiring Harness (With Corrosion Resistor)(#26201322-)
| 01***14 | Bolt - Fuel Sensor Mounting | 1 |
| 01***80 | Bolt (M10-1.50x80) | 1 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Wiring Harness(#26201322-26208812)
| 01***75 | Bolt (M10-1.50x75) | 1 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 1 |
| 01***12 | Bolt,(See Fig.0501) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Sa6d102e-1c Engine S/N 26200467-Up : Wiring Harness(#26208813-)
| 01***14 | Bolt - Fuel Sensor Mounting | 1 |
| 01***80 | Bolt (M10-1.50x80) | 1 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 1 |
Service Kit And Component Parts
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Accumulator (Al300-1) (Inner Parts)
| 20***60 | O-Ring (K1) | 2 |
| 20***50 | Accumulator | 1 |
| NF***P8 | Seal Kit | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Arm Cylinder
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***80 | Bolt,(With Corrosion Resistor) | 4 |
| 01***75 | Bolt (Kit) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Blower Ass'Y (For Air Conditioner)(#10001-10050)
| 17***90 | Clamp | 1 |
| 20***40 | Motor | 1 |
| ND***61 | Screw,Tapping | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Blower Ass'Y (For Air Conditioner)(#10051-)
| 17***90 | Clamp | 1 |
| 19***40 | Relay? 4-Terminal | 1 |
| 20***60 | Pipe | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Boom Cylinder (Lifting Spec.)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Box Ass'Y (Air Damper Case) (For Air Conditioner)
| 20***30 | Box Ass'Y | 1 |
| ND***61 | Screw,Tapping | 3 |
| ND***30 | Grommet | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Bucket Cylinder (For 2.0m Arm)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***40 | Bolt (Op) | 4 |
| 01***75 | Bolt (Kit) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Bucket Cylinder (For 2.5m Arm? 3.05m Arm And 3.5m Arm)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***70 | Bolt,(With Wear Guard) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Bucket Cylinder (Heavy Duty) (For 3.05m Arm)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***70 | Bolt,(With Wear Guard) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Compressor Ass'Y (For Air Conditioner)
| 20***11 | Air Compressor Ass'Y | 1 |
| ND***70 | Clamp, Tapping | 1 |
| ND***60 | Cover,Dust | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Condensor Ass'Y (For Air Conditioner)
| 20***30 | Clamp | 1 |
| 41***80 | Bolt,Washer | 9 |
| ND***62 | Bracket | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Core Unit Ass'Y (For Air Conditioner)(#10001-10050)
| 17***90 | Clamp | 2 |
| 17***30 | Bushing | 2 |
| 19***41 | Hose? 50mm | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Core Unit Ass'Y (For Air Conditioner)(#10051-)
| 17***90 | Clamp | 1 |
| 17***30 | Bushing | 2 |
| 19***41 | Hose? 50mm | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Filter Box Ass'Y (For Air Conditioner)(#10001-10050)
| 19***80 | Bushing | 1 |
| 20***80 | Filter | 1 |
| 56***90 | Element, Filter | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Filter Box Ass'Y (For Air Conditioner)(#10051-)
| 19***80 | Bushing | 1 |
| 56***90 | Element, Filter | 1 |
| ND***10 | Lever | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Final Drive (Travel Speed 1st) (Supply Only)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 16 |
| 01***80 | Bolt | 20 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Heater Ass'Y (2000 Kcal) (For Car Heater)
| 20***20 | Heater Ass'Y,(See Fig.Y1977-01a0) | 1 |
| ND***40 | Case,Lower | 1 |
| ND***30 | Cushion,Rubber | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Heater Ass'Y (3300 Kcal) (For Car Heater)
| 20***30 | Heater Ass'Y,(See Fig.Y1977-01a1) | 1 |
| ND***40 | Motor Ass'Y | 1 |
| ND***70 | Case,Upper | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (1/10)
| 04***18 | Bolt, Eye | 1 |
| 07***12 | Plug,Magnetic | 1 |
| 70***10 | O-Ring | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (10/10)
| 01***65 | Bolt | 2 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 2 |
| 01***08 | Nut | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (2/10)
| (****0) | Cap Ass'Y,End | 1 |
| (****0) | Bearing | 2 |
| (****8) | Pin, Dowel | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (3/10)
| 04***25 | Ring,(W/Emergency Steering) (1m?1d) | 1 |
| 70***60 | Snap Ring | 1 |
| 70***60 | Spacer | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (4/10)
| (****0) | O-Ring | 1 |
| (****0) | O-Ring | 1 |
| (****1) | Set Screw | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (5/10)
| 04***22 | Bolt,Eye | 1 |
| 07***14 | Plug, (For Shipping) | 1 |
| 07***12 | Plug,Magnetic | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (6/10)
| (****1) | Seat | 1 |
| (****0) | Bearing | 1 |
| (****1) | Block Ass'Y,Rear | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (7/10)
| (****0) | O-Ring | 1 |
| (****0) | O-Ring | 1 |
| (****1) | Set Screw | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (8/10)
| (****0) | Ring | 1 |
| (****0) | Coupling | 1 |
| (7***0) | Pump Sub Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Pump (9/10)
| 07***09 | O-Ring | 2 |
| 70***10 | O-Ring | 2 |
| 70***20 | O-Ring | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (1/14)
| 01***20 | Bolt | 20 |
| 01***60 | Bolt | 4 |
| 07***05 | O-Ring (K1) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (10/14)
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 1 |
| 70***90 | O-Ring,Suction | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (11/14)
| 01***60 | Capscrew | 4 |
| 01***40 | Bolt (Op) | 4 |
| 01***30 | Bolt (Itl) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (12/14)
| 01***20 | Bolt, Mount Spool Covers | 4 |
| 07***40 | O-Ring,Water Pump Mount | 2 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (13/14)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
| 70***20 | O-Ring | 1 |
| 72***50 | Ring,Back-Up | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (14/14)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 70***10 | Seal | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (2/14)
| 07***12 | O-Ring, Divider Valve Mounting | 9 |
| 07***15 | O-Ring,Regulator Valve | 6 |
| 07***18 | O-Ring, Divider Valve Mounting | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (3/14)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 7 |
| 70***20 | O-Ring | 7 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (4/14)
| 01***90 | Bolt,(Without Cab) | 4 |
| 01***55 | Bolt | 4 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (5/14)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (6/14)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (7/14)
| 01***50 | Bolt | 14 |
| 01***32 | Washer, (Without Emergency Steering) | 14 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (8/14)
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
| 70***90 | O-Ring,Suction | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (9/14)
| 07***11 | O-Ring (Kit) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 70***90 | O-Ring,Suction | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (1/11)
| 01***20 | Bolt | 20 |
| 01***60 | Bolt | 4 |
| 07***05 | O-Ring (K1) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (10/11)
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 1 |
| 70***90 | O-Ring,Suction | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (11/11)
| 01***60 | Capscrew | 4 |
| 01***40 | Bolt (Op) | 4 |
| 01***30 | Bolt (Itl) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (2/11)
| 07***12 | O-Ring, Divider Valve Mounting | 9 |
| 07***15 | O-Ring,Regulator Valve | 6 |
| 07***18 | O-Ring, Divider Valve Mounting | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (3/11)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 7 |
| 70***20 | O-Ring | 7 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (4/11)
| 01***90 | Bolt,(Without Cab) | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (5/11)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (6/11)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (7/11)
| 01***50 | Bolt | 14 |
| 01***32 | Washer, (Without Emergency Steering) | 14 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (8/11)
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
| 70***90 | O-Ring,Suction | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Main Valve (9/11)
| 07***11 | O-Ring (Kit) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 70***90 | O-Ring,Suction | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Monitor Panel
| 78***10 | Bulb - 1.4 Watt | 2 |
| 78***01 | Monitor Ass'Y | 1 |
| 78***02 | Monitor Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (Cab? Grip And Open Lock)
| 01***16 | Bolt | 3 |
| 01***20 | Bolt | 8 |
| 01***20 | Bolt | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (Door Lock)
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw | 3 |
| 01***20 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (Door)
| 01***25 | Bolt | 12 |
| 01***25 | Bolt | 12 |
| 14***30 | Hinge (Welded) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (Electrical)
| 01***20 | Screw (Not Illustrated) | 4 |
| 01***20 | Screw | 1 |
| 01***20 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (For Service Parts)
| 20***11 | Operator'S Cab Ass'Y,(Manual Window) | 1 |
| 20***12 | Operator'S Cab Ass'Y,(Manual Window) | 1 |
| 20***21 | Operator'S Cab Ass'Y,(With Front Guard) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (For Vandalism Protection) (Cab? Grip And Open Lock)
| 01***16 | Bolt | 3 |
| 01***20 | Bolt | 8 |
| 01***20 | Bolt | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (For Vandalism Protection) (Door Lock)
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw | 3 |
| 01***20 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (For Vandalism Protection) (Door)
| 01***25 | Bolt | 12 |
| 01***25 | Bolt | 12 |
| 14***30 | Hinge (Welded) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (Front Window)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 4 |
| 01***12 | Screw,(See Fig. K0210-16a0) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (Inside Cover)
| 01***12 | Screw,Sems | 4 |
| 01***25 | Screw | 2 |
| 01***12 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (Window And Roof Ventilator)
| 01***16 | Screw | 2 |
| 01***16 | Screw | 4 |
| 01***10 | Bolt | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Cab (With Guard) (Cab? Grip And Open Lock) (See Through Roof)
| 01***18 | Bolt,(Without Head Guard) | 6 |
| 01***16 | Bolt | 3 |
| 01***20 | Bolt | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Seat Ass'Y (Tilt) (Fabric Type)
| 20***00 | Seat Ass'Y | 1 |
| AS***13 | Hi Riser Spring Kit,Height Riser | 1 |
| AS***54 | Seat Foam Kit | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Operator'S Seat Ass'Y (Tilt) (Suspension Type)
| 20***00 | Seat Ass'Y | 1 |
| AS***17 | Up Stop/Bump Stop K | 1 |
| AS***18 | Damper Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Pilot Valve
| 01***20 | Bolt | 3 |
| 01***20 | Bolt | 4 |
| 01***25 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Ppc Valve (For Attachment)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 70***30 | Ppc Valve, Assembly | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Ppc Valve (For Travel)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***55 | Screw | 2 |
| 01***12 | Screw | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Ppc Valve (For Work Equipment)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 07***20 | O-Ring,Relief Valve | 4 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Service Kit (Cylinder)
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 6 |
| 07***35 | O-Ring, Upper Cooler Inlet And Outlet Ports | 1 |
| 07***80 | O-Ring,Cylinder Head | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Shoe Bolt And Nut Service Kit
| 20***30 | Shoe Bolt And Nut K | 1 |
| 20***50 | Shoe Bolt And Nut K | 1 |
| 20***10 | Bolt? Shoe (Y0320-K01 | 30 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Solenoid Valve (Inner Parts)(#10001-10014)
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 5 |
| 07***16 | O-Ring,Suction And Relief Valve | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Solenoid Valve (Inner Parts)(#10015-10043)
| 07***10 | O-Ring | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 5 |
| 20***01 | Valve Ass'Y,(See Fig.Y1860-01a0a) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Solenoid Valve (Inner Parts)(#10044-)
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 5 |
| 07***16 | O-Ring,Suction And Relief Valve | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Suction And Safety Valve
| 70***90 | O-Ring,Suction | 1 |
| 70***00 | Valve Ass'Y,Suction And Safety | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Swing Machinery Ass'Y (Supply Only)
| 01***45 | Bolt,(With Water Separator Type) | 12 |
| 01***50 | Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Swing Motor (1/3)
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Swing Motor (2/3)
| 04***20 | Ring, Snap | 1 |
| 70***30 | Swing Motor Ass'Y | 1 |
| 70***20 | Spacer | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Swing Motor (3/3)
| 01***25 | Screw | 2 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
| 07***07 | O-Ring - (K10) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Swivel Joint
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 04***30 | Ring, Retaining | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Track Link (90 Set) (Supply Parts)
| 14***40 | Seal,Dust? Regular? W-Type | 172 |
| 20***00 | Track Link Ass'Y | 1 |
| 20***01 | Track Link Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Travel Motor (1/3)
| 04***25 | Ring,Snap | 1 |
| 07***34 | O-Ring,(For Front Attachment) | 1 |
| 70***80 | Seal,Oil | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Travel Motor (2/3)
| 07***18 | O-Ring, Divider Valve Mounting | 2 |
| 07***18 | Ring, Back-Up | 2 |
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Travel Motor (3/3)
| 07***21 | O-Ring (Kit) | 1 |
| 07***18 | O-Ring (Kit) | 1 |
| 07***18 | Ring, Back-Up | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Uint Ass'Y (Cooling) (For Air Conditioner)(#10001-10050)
| 19***60 | Bushing | 1 |
| 20***10 | Unit Ass'Y | 1 |
| 20***11 | Unit Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Service Kit And Component Parts : Uint Ass'Y (Cooling) (For Air Conditioner)(#10051-)
| 19***60 | Bushing | 1 |
| 20***12 | Unit Ass'Y | 1 |
| 41***80 | Bolt,Washer | 1 |
Swing Circle And Related Parts
Komatsu : Pc250-6(S/N 10001-Up) : Swing Circle And Related Parts : Swing Circle (Concentrated Greasing)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 75 |
Komatsu : Pc250-6(S/N 10001-Up) : Swing Circle And Related Parts : Swing Machinery
| 01***45 | Bolt,(With Water Separator Type) | 12 |
| 01***60 | Bolt,Rear | 12 |
| 01***65 | Bolt | 18 |
Komatsu : Pc250-6(S/N 10001-Up) : Swing Circle And Related Parts : Swing Motor (Connecting Parts)
| 01***80 | Bolt,(With Corrosion Resistor) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***11 | Nut,(With Under Mirror) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Swing Circle And Related Parts : Swing Motor (Connecting Parts) (For Additional Piping) (1 Actuator)
| 01***80 | Bolt,(With Corrosion Resistor) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***11 | Nut,(With Under Mirror) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Swing Circle And Related Parts : Swivel Blind Parts
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Swing Circle And Related Parts : Swivel Joint (Connecting Parts) (Travel Speed 3rd)
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
| 01***26 | Washer,Plain | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Travel And Lower Piping
Komatsu : Pc250-6(S/N 10001-Up) : Travel And Lower Piping : Final Drive
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(With Body Positioner) | 32 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 12 |
Komatsu : Pc250-6(S/N 10001-Up) : Travel And Lower Piping : Travel Piping
| 01***32 | Washer, (Without Emergency Steering) | 32 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 4 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 2 |
Under Carriage
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Carrier Roller
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***00 | Bolt,(For 27.00-49) | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Center Guard
| 01***55 | Bolt, Fuel Tank Mounting | 16 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 16 |
| 07***30 | Plug,(For W/O. Full Roller Guard) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Front Idler
| 07***75 | O-Ring,Steering Oil Filter | 2 |
| 07***75 | O-Ring,Cylinder Head | 2 |
| 07***34 | O-Ring,Transmission And Steering Case | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Full Roller Guard
| 01***50 | Bolt,(Without Rops) | 24 |
| 01***15 | Nut (Op) | 16 |
| 01***45 | Washer,(Without R.O.P.S.) | 32 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Idler Cushion(#10001-10050)
| 01***75 | Capscrew (4) (Qty.3 (5)) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Idler Cushion(#10051-)
| 01***75 | Capscrew (4) (Qty.3 (5)) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Track Frame
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 20***71 | Seal | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Track Frame (For Under Cover)
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 20***71 | Seal | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Track Roller
| 01***60 | Flat Washer - M20 (Hardened) | 56 |
| 20***50 | Track Roller Ass'Y | 14 |
| 20***12 | Roller,Track | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (600mm Wide)
| 14***40 | Seal,Dust? Regular? W-Type | 172 |
| 20***00 | Track Shoe Ass'Y | 1 |
| 20***00 | Track Shoe Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (700mm Wide)
| 14***40 | Seal,Dust? Regular? W-Type | 172 |
| 20***10 | Track Shoe Ass'Y | 1 |
| 20***11 | Track Shoe Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (800mm Wide)
| 14***40 | Seal,Dust? Regular? W-Type | 172 |
| 20***20 | Track Shoe Ass'Y | 1 |
| 20***21 | Track Shoe Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Under Carriage : Under Cover (For Track Frame)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 20***20 | Cover | 1 |
Work Equipment
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (2.0m)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease (Steering Cylinder) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (2.0m) (For Component)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (2.5m)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (2.5m) (For Component)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (2.5m) (With Hd Bucket Cylinder) (For Component)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (2.5m) (With Large Bucket Cylinder) (For Component)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (3.05m)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (3.05m) (Additional Piping)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (3.05m) (For Additional Piping)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (3.05m) (For Additional Piping) (For Component)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (3.05m) (For Component)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (3.05m) (With Hd Bucket Cylinder) (For Component)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (3.05m) (With Large Bucket Cylinder) (For Component)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (Bucket Cylinder Hose And Spacer)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm (Bucket Link) (For 3.05m Arm)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm Cylinder
| (2***1) | Arm Cylinder Group,(See Fig.Y1620-11a0c) | 1 |
| (2***0) | Arm Cylinder Group,(See Fig.Y1620-11a0c) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Arm Less Parts (For 2.0m Arm)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 20***80 | Plate | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom (Arm Cylinder Line And Bucket Cylinder Line)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 22 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom (Heavy Duty)
| 07***00 | Seal,Dust (Kit) | 2 |
| 20***30 | Seat (Welded) | 2 |
| 20***81 | Bracket (Welded) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom (Heavy Duty) (Additional Line) (For Additional Piping)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom (Heavy Duty) (For Additional Piping)
| 07***00 | Seal,Dust (Kit) | 2 |
| 20***10 | Bushing | 2 |
| 20***21 | Boom Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom (Heavy Duty) (For Additional Piping) (Blind Parts)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 5 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom (Heavy Duty) (For Additional Piping) (For Component)
| 07***00 | Seal,Dust (Kit) | 2 |
| 20***10 | Bushing | 2 |
| 20***21 | Boom Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom (Lubricating Line And Working Lamp Harness)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 04***12 | Clip,-50 | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom (Top Pin And Bottom Pin)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom (Working Lamp And Boom Foot Lubricating)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom Cylinder (Lifting Spec.)
| (2***0) | Boom Cylinder Group,R.H. (See Fig.Y1620-01a3a) | 1 |
| (2***0) | Boom Cylinder Group,L.H. (See Fig.Y1620-01a3a) | 1 |
| (2***0) | Boom Cylinder Group,L.H. (See Fig.Y1620-01a3a) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Boom Pin
| 01***16 | Nut - M20 | 4 |
| 20***90 | Pin | 1 |
| 20***70 | Plate | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Breaker Adapter (For Atlas)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Breaker Adapter (For Matuda)(#10013-)
| 20***40 | Adapter | 2 |
| 20***50 | Plug | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Breaker Adapter (For Nippon Pneumatic)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket Cylinder (For Component Shipping)(#10034-)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
| 07***40 | Flange,Split (For Shipping) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket Hook : Unit_02_of_02
| 20***70 | Hook (Welded) | 1 |
| 20***21 | Plate | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket Hook : Unit_01_of_02
| 20***70 | Hook (Welded) | 1 |
| 20***20 | Plate (Welded) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket Hook (For 0.72m3 (Cece 0.65m3) Bucket)
| 20***70 | Hook (Welded) | 1 |
| 20***80 | Plate (Welded) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket Less(#10001-10011)
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket Less(#10012-)
| 20***20 | Link,Linkno Bucket | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket Link(#10034-)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 2 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 0.72m3 (Cece 0.65m3)? 900mm (Horizontal Pin Type)
| 09***16 | Pin,(Except Japan) | 3 |
| 20***10 | Tooth | 3 |
| 20***41 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 0.72m3 (Cece 0.65m3)? 900mm (Vertical Pin Type)
| 20***91 | Lock | 3 |
| 20***21 | Adapter (Welded) | 3 |
| 20***41 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 1.0m3 (Cece 0.9m3)? 1155mm (Horizontal Pin Type) (With Adjuster)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 09***16 | Pin,(Except Japan) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 1.0m3 (Cece 0.9m3)? 1155mm (Horizontal Pin Type) (With Adjuster) (Heavy Duty)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 09***16 | Pin,(Except Japan) | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 1.0m3 (Cece 0.9m3)? 1155mm (Vertical Pin Type)
| 20***91 | Lock | 4 |
| 20***21 | Tooth | 4 |
| 20***21 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 1.0m3 (Cece 0.9m3)? 1155mm (Vertical Pin Type) (With Adjuster)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 20***00 | Shim Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 1.17m3 (Cece 1.0m3)? 1400mm (Horizontal Pin Type) (With Adjuster)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 09***16 | Pin,(Except Japan) | 5 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 1.17m3 (Cece 1.0m3)? 1400mm (Vertical Pin Type) (With Adjuster)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 20***00 | Shim Ass'Y | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 1.26m3 (Cece 1.1m3)? 1400mm (Horizontal Pin Type)
| 09***16 | Pin,(Except Japan) | 5 |
| 20***10 | Tooth | 5 |
| 20***21 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Bucket? 1.26m3 (Cece 1.1m3)? 1400mm (Vertical Pin Type)
| 20***91 | Lock | 5 |
| 20***21 | Tooth | 5 |
| 20***21 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Clamshell Bucket
| 01***20 | Bolt,(For Mono Lever Steering) | 10 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***50 | Capscrew | 8 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Ditch Cleaning Bucket? 0.8m3 (Cece 0.7m3)? 1800mm
| 20***20 | Plate (Welded) | 1 |
| 20***30 | Plate,(L.H.) (Welded) | 1 |
| 20***40 | Plate,(R.H.) (Welded) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Ripper Bucket? 0.61m3 (Cece 0.56m3)? 950mm
| 01***16 | Nut - M20 | 4 |
| 09***08 | Pin,(Without Pin Puller) | 3 |
| 17***30 | Point,(For Multi Ripper) | 3 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Side Cutter (For Bucket)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***80 | Cutter,(L.H.) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Single Shank Ripper
| 01***16 | Nut - M20 | 4 |
| 09***08 | Pin,(Without Pin Puller) | 1 |
| 17***30 | Point,(For Multi Ripper) | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Slope Finishing Bucket
| 20***90 | Bolt | 1 |
| 20***10 | Collar | 2 |
| 20***10 | Bucket,Slope Finishing | 1 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Three Shank Ripper
| 01***05 | Bolt | 3 |
| 01***10 | Nut,(Without Air Conditioner) | 6 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Pc250-6(S/N 10001-Up) : Work Equipment : Trapezoidal Bucket
| 01***60 | Capscrew | 12 |
| 01***16 | Nut - M20 | 4 |
| 01***19 | Nut - M24 | 12 |
PC250-6(S/N 10001-UP) serial number reference
On this generation of Komatsu excavator the PIN/serial plate sits on the right-hand side of the machine, near or below the operator's cab, with the number also stamped into the frame itself. At this serial range the identifier is purely numeric (no letter prefix) — reading the plate means matching the machine's serial number against the published break point (10001-and-up) to confirm it falls in this production run. Later production runs of related PC250 variants can carry a single-letter serial prefix, so don't assume every PC250-family plate is unprefixed.
| Prefix | Identifies | Notes |
|---|---|---|
| 10001-UP | PC250-6, standard (short) undercarriage — base chassis, distinct from the PC250LC-6 long-carriage export version and the PC250HD-6Z custom heavy-duty variant | Factory serial break opening the PC250-6 production run. Parts and shop documentation for this S/N range cover the PC250-6 together with the PC250LC-6 and PC250HD-6Z under one combined manual set, confirming a shared SA6D102E-1 series turbocharged diesel rated at roughly 128 kW (172 hp) at 2300 rpm across the family; confirm the exact engine suffix letter for a given unit with a dealer. The plain PC250-6 rides the standard (narrower/shorter) undercarriage, versus the LC model's wider long-carriage track base; exact track gauge and shoe width for the base machine are not published in general spec references, so verify with a dealer using the full serial number. A later PC250LC-6-specific production run carries its own separate serial break with a letter prefix, so specs or parts tied to that later range do not apply to this 10001-up machine. |
Frequently asked questions
What engine does the Komatsu PC250-6 (S/N 10001-UP) use?
It runs a Komatsu SA6D102E, a six-cylinder, turbocharged and air-to-air aftercooled diesel with mechanical governing and mechanical injection - no electronic engine control. Net output is 128 kW (171.7 hp) at 2,300 rpm. This is the same base engine used across the PC220-6 through PC250-6/PC250LC-6 range built to this serial block.
What is the operating weight of the Komatsu PC250-6 (S/N 10001-UP)?
Operating weight for this standard-undercarriage build isn't separately published; it runs lighter than the long-undercarriage PC250LC-6 sibling, which weighs 27.5 t (60,627 lb) on 700 mm shoes. Expect the base machine to fall in the 25-27.5 t class. Confirm the exact figure for a specific unit against its data plate or with a dealer.
What replaced the Komatsu PC250-6 (S/N 10001-UP)?
It was succeeded by the Dash-7 generation PC250-7, which kept the same displacement class but moved to a revised SAA6D102E-2 engine. The Dash-6 generation itself replaced Komatsu's earlier Dash-5 series (PC220-5 class); the PC250 model number effectively begins with this Dash-6 generation.
What PC250-6(S/N 10001-UP) owners discuss
What hydraulic power problems do owners and mechanics report on the PC250-6?
Owners report sudden loss of hydraulic power or momentary shutdowns during heavy-load work, most often traced to the LS-EPC pump control circuit rather than the pump itself. A clogged return or pilot filter is a common first suspect since it starves the control circuit and drags down output on every function at once, not just one. When several functions weaken together, the main control valve or a relief valve cartridge is the more likely culprit than a single hose or cylinder. Owners recommend pulling the return filter and checking for metal particles before chasing wiring or sensor faults. Have your dealer verify any suspected pump controller or relief valve fault before returning the machine to service.
What undercarriage wear pattern is typical for this excavator?
Track pads, rollers, and idlers wear unevenly in this weight class, and pivot turns (spinning one track while the other holds) are the most cited cause of accelerated wear in operator discussions. The repeated advice is to favor wide-radius turns and several small repositioning moves in tight areas instead of counter-rotating the tracks. Keeping the undercarriage clear of packed debris comes up often as basic upkeep that extends component life. Track pad thickness and roller/idler play are the first things experienced buyers measure on a used machine.
What engine quirks come up for the dash-6 series SA6D102E on this machine?
The SA6D102E six-cylinder turbocharged and aftercooled diesel used across this dash-6 mid-size range is mechanically governed and mechanically injected, so it has no electronic engine control unit quirks to chase. Hard cold-start complaints in this generation trace almost always to the glow plug relay or its wiring rather than the injection pump or engine internals. The preheat circuit is designed to engage only below roughly 10°C (50°F) coolant temperature, so no visible preheat cycle in mild weather is normal, not a fault. Owners describe the engine as tolerant of hard use once warmed up, and most drivability complaints in threads point to fuel filtration or intake restriction before the injection pump is blamed.
What electrical and sensor issues show up in forum threads?
Monitor panel fault codes are the most discussed electrical topic. A low system voltage code points to charging circuit or wiring problems rather than a bad battery, and codes tied to the LS control EPC solenoid circuit (disconnection or short) show up as sluggish or absent hydraulic response rather than just a dash warning. A flashing charge light is commonly traced to loose or corroded wiring at the alternator connector or a failing regulator rather than a dead alternator. Owners caution against swapping the alternator on a hunch and recommend testing the harness and connectors first. Have your dealer verify any wiring or solenoid circuit repair that affects pump control before putting the machine back to work.
What swing and travel drive problems are commonly reported?
Swing motor seal leaks are a recurring complaint, with some owners reporting reseals needed more than once in a short span, usually linked to contaminated hydraulic oil rather than a bad seal batch. Travel motor symptoms flagged in threads include a screeching or whining noise, reduced pulling power, and oil weeping at the motor housing, most often tied to worn bearings or contaminated gear oil rather than a broken shaft. Weak final drive power is commonly resolved by draining and inspecting the final drive oil for contamination before any internal teardown is considered.
What causes boom drift or sluggish, uneven travel on this machine?
Boom or arm drift under load and uneven travel speed between tracks are generally traced to worn relief valve cartridges or internal spool leakage in the main control valve, not a single bad cylinder seal. Stiff or spring-loaded joystick feel is called out as an early sign of a clogging pilot filter, which can mimic an electrical control fault if misdiagnosed. Unintended boom movement is a safety issue. Have your dealer verify and correct any control valve or relief valve fault before continued operation.
What should a buyer check before purchasing a used PC250-6 (S/N 10001-UP)?
Cycle every hydraulic function through full travel and listen for pump whine or sponginess. Inconsistent response across functions points to the pump or control valve rather than one worn cylinder. Check the undercarriage for track pad thickness, roller and idler play, and bushing wear, since these are costly to replace as a set. Ask for full service records and usage data where the machine has telematics, to confirm reported hours and idle time. Look over the boom, arm, and main frame for cracks or repair welds, and check the monitor panel for stored fault codes. Have your dealer verify hydraulic pressures and any stored fault codes as part of a pre-purchase inspection.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific PC250-6(S/N 10001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.