Komatsuhydraulic excavatormedium (pc100 - pc270)
Komatsu PC200LC-8(S/N 310001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu PC200LC-8 (S/N 310001-UP) is a 20-tonne-class crawler hydraulic excavator built on the long-undercarriage (LC) configuration of Komatsu's PC200-8 platform. It runs the Komatsu SAA6D107E-1 diesel, a water-cooled, turbocharged and aftercooled inline-six with common-rail electronic fuel injection rated at roughly 110 kW (148 HP) net at 2000 rpm. Operating weight for this configuration falls in the range of about 20.6-21.5 tonnes (45,500-47,300 lb), varying with boom/arm combination, counterweight, and attachments. The -8 generation followed the PC200-7 and was produced through the mid-2000s into the early 2010s, offered in standard (PC200-8) and long-undercarriage (PC200LC-8) chassis, with this particular serial block representing a distinct production run within the LC-8 line, separate from the parallel overseas-spec run built for other export markets on the same base platform.
The PC200-8 generation's biggest change from the PC200-7 was the move to electronically controlled, common-rail fuel injection tied into a closed-center, load-sensing hydraulic system, replacing the prior generation's more mechanical engine and pump controls. That integration improved fuel economy and multi-function smoothness but raised the bar on diagnostics and fluid cleanliness compared with older PC200 machines. Within the -8 generation itself, Komatsu produced parallel serial-numbered runs calibrated for different home markets while sharing the same engine family, hydraulics, and running gear, so correct serial-range identification matters when sourcing parts or service literature. In the used and parts market, the PC200LC-8 remains a dependable pick in the 20-ton class: the platform sold in high numbers, shares major components across the wider PC200-8/PC220-8 family, and is backed by a deep base of shop and parts documentation, which keeps parts sourcing and resale value strong even as newer Tier 4 generations have taken over new-machine sales.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu PC200LC-8(S/N 310001-UP) specifications
Engine
| Engine model | Komatsu SAA6D107E-1, water-cooled 4-cycle direct injection diesel, turbocharged and aftercooled, common rail fuel injection |
| Gross power | 115.6 kW / 155 HP @ 2000 rpm |
| Net power | 110 kW / 148 HP @ 2000 rpm |
| Displacement | 6.69 L (6,686 cc / 408 cu in) |
| Cylinders / bore x stroke | 6 cylinders, 107 mm x 124 mm |
| Emissions | EPA Tier 3 / EU Stage IIIA compliant |
Weights
| Operating weight | 19,750-21,460 kg (43,540-47,310 lb); varies by configuration (track shoe width, arm length, bucket, counterweight) |
| Ground pressure, 700 mm shoes (standard) | 0.40 kg/cm2 (39 kPa / 5.7 psi) |
| Ground pressure, 800 mm shoes (option) | 0.35 kg/cm2 (34 kPa / 5.0 psi) |
Dimensions
| Transport length | approx. 5.91 m (19.4 ft) |
| Transport width (over tracks, 700 mm shoes) | approx. 3.20 m (10.5 ft) |
| Transport height (top of boom, transport position) | approx. 3.20 m (10.5 ft) |
| Height to top of cab | approx. 3.05 m (10.0 ft) |
| Tail swing radius | approx. 2.96 m (9.7 ft) |
| Track shoe width | 700 mm standard; 600 mm and 800 mm shoes offered |
| Ground clearance | approx. 0.44-0.46 m (1.45-1.5 ft); varies by source |
| Undercarriage length (track length on ground) | approx. 3.46 m (11.4 ft) |
| Track gauge | approx. 2.41 m (7.9 ft) |
Performance
| Max digging depth | 6.62-6.64 m (21.7-21.8 ft) |
| Max reach at ground level | 9.72-9.88 m (31.9-32.4 ft) |
| Max dump/loading height | approx. 7.13 m (23.4 ft) |
| Max digging/cutting height | 9.81-10.0 m (32.2-32.8 ft) |
| Swing speed | 12.4 rpm |
| Travel speed | high 5.5-5.6 km/h (3.4 mph); low 4.1 km/h (2.5 mph) |
| Gradeability | 70% (35 degrees) |
| Drawbar pull | approx. 178 kN (18.2 t / 40,120 lb) |
Forces
| Bucket digging force (ISO 6015) | 138 kN (14.1 t) standard mode; up to 149 kN (15.2 t) in Power Max mode |
| Arm/stick digging force (ISO 6015) | 101 kN (10.3 t) standard mode; up to 108 kN (11.0 t) in Power Max mode, standard arm; long-arm figures not separately documented for this serial range |
Service capacities (summary)
| Fuel tank | 400 L (105.7 gal) |
| Hydraulic system (tank + circuit) | 135 L (35.7 gal) |
| Engine oil | 23.1 L (6.1 gal) |
| Cooling system | 20.4 L (5.4 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PC200LC-8(S/N 310001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 23.1 L (6.1 US gal) | Komatsu Genuine engine oil (EO series). Use SAE 10W-30 in cold-to-moderate climates, SAE 15W-40 in warm climates, meeting JASO DH-1 / API CI-4 class. This ecot3 (EPA Tier 3 / EU Stage 3A) SAA6D107E-1 engine has no DPF, so the low-ash LA/ULA oils built for later Tier 4 engines are not required. |
| Cooling system | 20.4 L (5.4 US gal) | Komatsu Super Coolant AF-NAC, an all-season, non-amine, non-nitrite ethylene-glycol coolant with long-life corrosion and cavitation inhibitors. Premixed for year-round use; no separate winter/summer blend called out. |
| Fuel tank | 400 L (105.7 US gal) | Diesel fuel only, ASTM D975 No. 2-D (or regional low-sulfur equivalent). Machine has a fuel pre-filter with water separator as standard; poor-quality-fuel filter kit offered as an option for low-grade fuel regions. |
| Hydraulic system total and hydraulic tank | Hydraulic tank refill: 135 L (35.7 US gal). Total system capacity including cylinders and lines is not separately broken out in factory literature for this range. | Komatsu Genuine hydraulic oil, HO series (ISO VG46 grade for normal climates, lighter VG32-equivalent grade for cold climates). Anti-scuff, anti-wear formulation sized for HydrauMind closed-center load-sensing system; genuine BIO hydraulic oil offered as an environmentally sensitive alternative. |
| Final drive (each side) | 3.3 L (0.9 US gal) per side | Komatsu Genuine powertrain oil, TO series (SAE 10W for cold starts, SAE 30W for normal-to-warm climates), API CD performance level. |
| Swing drive | 6.6 L (1.7 US gal); some spec sheets round this to about 6.4 L for the same fill | Komatsu Genuine powertrain oil, TO series (same SAE 10W/30W climate split as final drive), API CD. Swing circle itself is grease-bathed, separate from the gearbox oil fill. |
| Pilot circuit / other hydraulic circuits | Not separately listed - pilot, travel, and swing hydraulic circuits draw from the common 135 L hydraulic tank. | Same Komatsu Genuine HO-series hydraulic oil used for the main hydraulic tank. |
| Grease (work equipment pins, bushings, swing circle) | Spec only - no refill volume published | Komatsu Genuine multipurpose grease, G2-LI, a lithium 12-hydroxystearate EP grease (NLGI 2) rated as a one-grease solution for most points on the machine. Optional extended-interval (500-hour) work-equipment bushing package uses matched high-quality bushings/shims with this same grease line. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu PC200LC-8(S/N 310001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the PC200LC-8(S/N 310001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull oil samples from the engine, hydraulic tank, swing gearbox, and both final drives at each scheduled service and trend iron, silicon, and fuel dilution. The SAA6D107E-1's common-rail fuel system punishes dirty fuel, so track water-separator drain frequency as an early clog warning. Watch the hydraulic return filter's bypass indicator on this closed-center load-sensing system; rising bypass frequency usually flags main pump wear before flow loss is felt at the stick. Log corrosion resistor condition at every coolant check.
Corrective & Common Repairs
Corrective work on this serial range centers on hydraulic hose and cylinder seal leaks at the boom foot and arm cylinder, plus swing-circle bearing play and travel final-drive seal weeping as hours climb. Electrical faults trace mostly to corroded harness connectors and pump/engine controller sensor grounds rather than the engine itself. Track pad, bushing, and link wear on the LC long-undercarriage running gear is the most frequent structural repair; measure link pitch regularly before wear pushes the chain onto the sprockets.
Overhaul & Rebuild Points
Major rebuild points on this platform are the main hydraulic pump and control valve assembly, the swing motor/gearbox, and the paired two-speed travel motors, all of which wear as seal and spool tolerances open under the closed-center load-sensing pressures this machine runs. Engine-out work more often follows turbocharger or injector failure on the common-rail SAA6D107E-1 than block wear. Budget undercarriage rebuild — rollers, idlers, sprockets, and track chain — as the highest-cost overhaul line on high-hour LC units.
Seasonal & Environment Servicing
Cold-start reliability on the SAA6D107E-1 depends on correct-viscosity engine oil and a coolant mix rated below ambient lows; check corrosion resistor condition and antifreeze concentration before winter. On hot or dusty sites, shorten air cleaner and hydraulic breather service intervals and inspect the radiator, oil cooler, and aftercooler fin pack more often, since the closed-center hydraulic system runs hotter under sustained fine-grading work. On wet or muddy sites, check final drive and swing gearbox oil more frequently for water contamination.
PC200LC-8(S/N 310001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 207-60-71181 | Element,Air Cleaner | Air intake service | Check fitment → |
| 09637-30163 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 09637-30263 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
| 17M-911-3530 | Element,Air | Air intake service | Check fitment → |
| 20Y-60-21470 | Element | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PC200LC-8(S/N 310001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CA111 | Engine controller (E-ECU) critical internal failure | Defective memory or internal power supply circuit inside the engine controller itself | Rule out other active codes and check E-ECU power/ground wiring first; if no external cause is found, the controller has an internal defect and cannot be repaired, replace the engine controller |
| CA234 | Engine overspeed detected by the engine controller | Engine speed exceeded the controller's upper limit, typically from a downhill travel overrun or a load/gearing condition letting the engine overrun; a speed sensor fault can also cause a false reading | Check engine speed sensor wiring and reading against actual rpm, inspect for a mechanical overspeed event (e.g., travel downhill), then rescan; the controller automatically cuts fuel injection until speed drops back into range |
| CA428 | Water-in-fuel sensor signal circuit voltage too high (fuel pre-filter/separator sensor) | Faulty water-in-fuel sensor on the fuel pre-filter, damaged sensor wiring, or a connector fault; water actually present in the separator can also trigger this | Drain the water separator first, then inspect and test the water-in-fuel sensor and its harness at the fuel pre-filter; replace the sensor if it fails a resistance/voltage check |
| CA451 | Common rail fuel pressure sensor feedback voltage too high | Failed rail pressure sensor or its wiring, or an actual rail overpressure condition from the fuel supply pump/regulator | Check sensor wiring and connector first; if the code alternates with CA452 or clears with a sensor swap, replace the rail pressure sensor. The controller restricts engine output while this code is active |
| CA452 | Common rail fuel pressure sensor feedback voltage too low | Faulty rail pressure sensor circuit, open/shorted wiring, or low actual rail pressure from the supply pump or an injector return issue | Verify sensor connector and wiring continuity, check rail pressure with service tool data, replace the sensor if it fails to track actual pressure (especially if the code changes to CA451 during testing, which points to a bad sensor) |
| DA22KK | Pump controller (P-ECU) solenoid driver power supply voltage low | Low supply voltage to the pump controller's solenoid driver circuit, often a blown fuse or fusible link, weak battery/charging system, or a ground fault in the feed wiring | Check the fusible link/fuse feeding the pump controller and inspect for a ground fault, then check battery voltage and charging system before replacing the controller; while active, all solenoid-related codes are suppressed and the machine will not operate normally until power is restored |
| DXA8KA | Front pump PC-EPC (pump control proportional solenoid) valve circuit open | Open circuit in the front pump PC-EPC solenoid coil or its wiring harness/connector; no current flows when the solenoid is commanded | Measure solenoid coil resistance and check harness continuity to the pump controller; repair the wiring or replace the solenoid coil if it reads open |
| DHPAMA | Front pump discharge pressure sensor signal abnormality (signal out of the normal voltage range) | Faulty front pump discharge pressure sensor or damaged sensor wiring/connector | Check sensor connector and wiring, compare the sensor reading to expected pump pressure with the service tool's monitoring function, replace the sensor if the reading stays out of range |
| E02 | Monitor panel user code flagging a PC-EPC (pump control) system fault | Underlying pump controller or PC-EPC solenoid fault (see the related failure code, e.g. DXA8KA, for detail) | Connect service tool to read the detailed failure code behind the E02 alert, then troubleshoot that specific component |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PC200LC-8(S/N 310001-UP) attachments & work tools
Buckets
General-duty (GD) buckets for this size class span roughly 0.50-1.20 m3 (0.65-1.57 yd3) heaped, widths from about 750 mm (narrow trench, 3-tooth) up to 1450-1600 mm (6-tooth, general excavation). A 1.17-1.20 m3 wide bucket is offered as a light/rock-class option but is rated for lower material density than the mid-range GD sizes; true HD/rock buckets on this class typically run smaller capacity (0.5-0.8 m3) with reinforced side plates. Bucket pin bore is commonly around 80 mm for this machine class; confirm exact pin/bushing bore against the specific boom-arm combination before ordering. Pin-on mounting is standard; coupler-ready (no-weld) buckets are widely available matching quick-coupler pin spacing for this class.
Hydraulic hammers
This machine falls in the 18-20 tonne carrier class, which lines up with mid-size hydraulic breaker ranges rated roughly 1,400-2,600 kg working weight depending on brand series. Example breakers marketed for this carrier size list working weights in the 1,550-2,125 kg band. The excavator's monitor offers a dedicated breaker/attachment work mode that sets one-way hydraulic flow and engine speed for a single-acting hammer circuit, separate from the two-way flow mode used for bidirectional tools.
Quick couplers
Both mechanical (manual wedge/pin) and hydraulic (cab-controlled wedge or pin-grab) quick couplers are fitted to this size class, sized to roughly 80-100 mm pin diameter. Hydraulic couplers let the operator swap buckets and pin-on attachments from the cab; mechanical types require a pin to be dropped and secured manually. Coupler selection must match the bucket/attachment pin spacing and bore for this carrier class, not just pin diameter.
Thumbs/grapples
Bolt-on hydraulic thumbs (clamp-style, mounted to the arm near the bucket pin) are a common addition for this class, sized to work opposite the 0.5-1.2 m3 bucket range; mechanical (pinned, non-powered) thumbs are also used for lighter-duty grading and sorting. Rotating grapples (log/timber grabs, orange-peel/multi-finger scrap and rock grapples) are offered in this size class for demolition, land clearing, and material handling, typically double-cylinder driven with full 360-degree rotation.
Rippers
A single-shank ripper is the common attachment offered for this size class, used for hard soil digging, pavement/asphalt removal, and light rock ripping ahead of excavation. Three-shank rippers exist for lighter scarifying work but are less commonly specified on this carrier size.
Hydraulic-kit notes
This platform runs a closed-center, load-sensing system with two main pumps totaling roughly 439 lpm combined flow and relief pressure in the mid-30s MPa range (approximately 34-39 MPa / 350-400 kgf/cm2, varies by circuit and adjustment). Attachment work requires a dedicated one-way (breaker) or two-way (multi-function, e.g. thumb, tilt) auxiliary plumbing kit routed to the arm, with mode selection from the in-cab monitor; medium-pressure/high-flow requirements depend on the specific tool manufacturer's spec sheet, so match relief pressure and flow to the attachment before hookup rather than assuming a single standard circuit for all tools.
All PC200LC-8(S/N 310001-UP) assemblies by section
Every catalogued assembly group for the Komatsu PC200LC-8(S/N 310001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Accessory
Komatsu : Pc200lc-8(S/N 310001-Up) : Accessory : Cap And Overall
| 09***50 | Overall,(Special Order) | 1 |
| 09***50 | Cap And Overall Kit | 1 |
| 09***57 | Cap,(For Japan) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Accessory : Spare Parts
| 07***60 | O-Ring,(F4350-55a0 -10 ) | 1 |
| 07***95 | O-Ring (Kit) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Accessory : Spare Parts (Sandy And Dusty Spec.)
| 07***60 | O-Ring,(F4350-55a0 -10 ) | 1 |
| 07***95 | O-Ring (Kit) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Accessory : Tool
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***17 | Nozzle | 1 |
Cooling System
Komatsu : Pc200lc-8(S/N 310001-Up) : Cooling System : Cooling System (Fan Guard And After Cooler Piping)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(With Body Positioner) | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Cooling System : Cooling System (Fan Guard And After Cooler Piping) (Sandy And Dusty Spec.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(With Body Positioner) | 5 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Cooling System : Cooling System (Fuel Cooler And Blind Parts)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Cooling System : Cooling System (Fuel Cooler And Condenser) (With Air Conditioner) : Unit_01_of_02
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Cooling System : Cooling System (Fuel Cooler And Condenser) (With Air Conditioner) : Unit_02_of_02
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Cooling System : Cooling System (Oil Cooler)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Cooling System : Cooling System (Radiator)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Cooling System : Cooling System (Shroud And After Cooler)
| 01***20 | Bolt,(For Mono Lever Steering) | 24 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 20 |
Electrical System
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Additional Rear Work Lamp : Unit_02_of_02
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 08***70 | Plug, Sealing | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Additional Rear Work Lamp : Unit_01_of_02
| 01***16 | Bolt - Box Mounting | 2 |
| 01***35 | Bolt,(For Fix Position) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Additional Work Lamp (Demolition Spec.)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Additional Work Lamp (For Kal)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 08***14 | Band,(D60p) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Additional Work Lamp (With Front Guard)
| 01***20 | Bolt | 2 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 2 |
| 04***12 | Clamp | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Additional Work Lamp(#310001-311039)
| 01***30 | Bolt,R.H | 2 |
| 01***32 | Plain Washer | 2 |
| 08***10 | Clip,(With Corrosion Resistor) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Additional Work Lamp(#311040-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 04***12 | Clamp | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Battery (Large Capacity) (Wet)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Battery (Wet)
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Beacon Lamp
| 01***16 | Bolt - Box Mounting | 2 |
| 01***35 | Bolt,(For Fix Position) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Beacon Lamp (For Kal)
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Electric Wiring (Battery Case Side)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Electric Wiring (Emergency Switch) (For Kal)
| 01***20 | Bolt,Sems | 2 |
| 01***60 | Bolt | 2 |
| 01***32 | Plain Washer | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Electric Wiring (Engine Side)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 13 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Electric Wiring (Engine Side) (With Sealed Alternator)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 13 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Electric Wiring (Main Harness) (1/2)
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 15 |
| 01***10 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Electric Wiring (Main Harness) (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***85 | Bolt,(Used With Pin Puller) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 13 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Electric Wiring (Starting Harness)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***30 | Bolt - M8 X 30lg | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Horn
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Rear View Monitoring System (1 Camera)
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Rear View Monitoring System (2 Camera)
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Rear View Monitoring System Less
Komatsu : Pc200lc-8(S/N 310001-Up) : Electrical System : Travel Alarm
Engine Related Parts
Komatsu : Pc200lc-8(S/N 310001-Up) : Engine Related Parts : Air Cleaner Connecting Parts
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***05 | Clamp | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Engine Related Parts : Air Cleaner Connecting Parts (With Pre-Cleaner)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***05 | Clamp | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Engine Related Parts : Corrosion Resistor
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Engine Related Parts : Corrosion Resistor (With Air Conditioner)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Engine Related Parts : Dumper
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 10 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Engine Related Parts : Engine Mount
| 01***55 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Engine Related Parts : Filter Remote Piping And Main Pump
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***75 | Bolt - Tube Mounting | 1 |
Fuel Tank And Related Parts
Komatsu : Pc200lc-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Line (Drain Piping)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***75 | Bolt - Tube Mounting | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Line (Drain Piping) (For Fuel Refill Pump)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***75 | Bolt - Tube Mounting | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Line (Fuel Supply Piping)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Tank
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Tank (For Fuel Refill Pump)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Guard
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Battery Case
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Battery Case (With Fuel Refill Pump)
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 20***91 | Hand Rail | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Counter Weight (3730kg)
| 20***20 | Plate | 4 |
| 20***10 | Plate? 1.6mm,1.6mm | 2 |
| 20***30 | Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Counter Weight (3730kg) (For Kal)
| 01***30 | Bolt,(Not Used When Towing Winch) | 47 |
| 01***12 | Screw | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 40 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Counter Weight (3730kg) (With Rear View Camera)
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Counter Weight Mounting
| 01***30 | Bolt,(Not Used When Towing Winch) | 40 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 16 |
| 01***12 | Screw | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : H00d
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
| 01***16 | Washer,(For 35a Alternator) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Handrail
| 01***30 | Screw | 2 |
| 20***30 | Clamp | 1 |
| 20***60 | Support | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Hood (Net)
| 01***30 | Bolt,R.H | 2 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 22 |
| 01***32 | Plain Washer | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Machine Cab Cover
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 22 |
| 01***16 | Screw | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Machine Cab Cover (Cover) (With Pre Cleaner)
| 20***30 | Sheet | 1 |
| 42***40 | Clamp | 1 |
| 42***60 | Bolt | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Machine Cab Cover (For 2-Actuator)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 26 |
| 01***16 | Screw | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Machine Cab Cover (Pre Cleaner) (With Pre Cleaner)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Machine Cab Frame
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***60 | Sheet | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Machine Cab Frame (With Pre-Cleaner)
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***60 | Sheet | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Partition (Left Side)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Partition (Left Side) (With Air Conditioner)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Partition (Left Side) (With Corrosion Resistor)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Partition (Left Side) (With Corrosion Resistor) (With Air Conditioner)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Partition (Middle) (With Air Conditioner)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 21 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Partition (Valve And Muffler Side) (With Air Conditioner)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 22 |
| 01***16 | Screw | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Rear View Mirror (For Counter Weight)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***08 | Screw | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Rear View Mirror? L.H.
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***30 | Screw | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Rear View Mirror? R.H.
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***08 | Screw | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Side Cover? L.H.
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 19 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Side Cover? R.H.(#310001-310222)
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Side Cover? R.H.(#310223-)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Under Cover (For Fuel Refill Pump) (With Water Separator)
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Under Cover (For Kal)
Komatsu : Pc200lc-8(S/N 310001-Up) : Guard : Under Cover (With Water Separator)
Hydraulic System
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Arm And Bucket Line
| 01***75 | Bolt | 4 |
| 07***21 | O-Ring (Kit) | 1 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Arm And Bucket Line (With Arm Holding Valve)
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***85 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Arm Drift Priventive
| 01***40 | Bolt (Op) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? L.H.) (1-Actuator) (For Quick Coupler)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***40 | Bolt (Op) | 2 |
| 01***75 | Bolt (M10-1.50x75) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? L.H.) (For 1-Actuator)
| 01***40 | Bolt (Op) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? R.H.) (1 Actuator) (For Breaker Adapter)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? R.H.) (1-Actuator) (For Quick Coupler)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? R.H.) (For 1-Actuator)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Return And Pilot Filter) (For 1-Actuator)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Attachment Lines (For 2-Actuator)
| 02***15 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 6 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Boom Line
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 5 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Delivery Line
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Delivery Line (With Inline Filter)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Drain Lines
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 5 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Hydraulic Oil Tank (1-Actuator) (For Kal)
| 02***11 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 13 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Hydraulic Oil Tank (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Hydraulic Oil Tank (For 1-Actuator) (With Arm Crane)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Hydrulic Oil Tank
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Hydrulic Oil Tank (With Arm Crane)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Ls Lines
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Ls Lines (For 1-Actuator)
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (Connecting Parts) (1/2)
| 02***11 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 13 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (Connecting Parts) (2/2)
| 02***08 | O-Ring (Kit) | 10 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (For 1-Actuator) (Connecting Parts) (1/2)
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (For 1-Actuator) (Connecting Parts) (2/2)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 02***10 | Plug | 4 |
| 02***08 | O-Ring (Kit) | 11 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (For 2-Actuator) (Connecting Parts) (1/2)
| 02***08 | O-Ring (Kit) | 7 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (For 2-Actuator) (Connecting Parts) (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***35 | Bolt,(With Rops) | 1 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (Valve Bracket And Sensor)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (With Service Valve) (For 1-Actuator) (Connecting Parts) (2/2)
| 02***08 | O-Ring (Kit) | 12 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Pump
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Main Pump (For 1-Actuator)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | O-Ring,(Y1620-11a0a-11) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Multi Pattern Valve (Iso/Backhoe Change Valve)
| 02***15 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 7 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Multi Pattern Valve (Iso/Backhoe Change Valve) (Connecting Parts)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Multi Pattern Valve (Iso/Backhoe Change Valve) (Hose)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Oil Cooler Lines
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Pressure Switch Block
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Quick Coupler Lines (1 Actuator) (For Kal)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Return Line
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 02***08 | Hose | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Return Line (For 1-Actuator)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve Piping)
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve Piping) (For 1-Actuator)
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve Piping) (For 2-Actuator)
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve)
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve) (For 1 And 2-Actuator)
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Suction Line(#310001-310006)
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***25 | Capscrew | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Suction Line(#310007-)
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***40 | Bolt | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Swing Lines
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
| 01***35 | Bolt,(With Rops) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Hydraulic System : Travel Line
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Main/Revolving Frame And Related Parts
Komatsu : Pc200lc-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Boom Foot Pin (100 Hours Greasing Type)
Komatsu : Pc200lc-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame (For Fuel Refill Pump)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame (For Fuel Refill Pump) (With Deck Guard)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame (For Kal)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame (With Deck Guard)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Marks And Plates
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (1-Accumulator)
| 09***00 | Plate? Safety,(English) (Lettering Type) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (1-Accumulator) (English)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (1-Accumulator) (Spanish)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (2-Accumulator)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (2-Accumulator) (English)
| 22***90 | Plate,Warning Of Moving Machine | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (2-Accumulator) (Spanish)
| 22***10 | Decal, Socket (English) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Arm)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***70 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Battery) (English And Turkish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Battery) (English)(#310001-311328)
| 09***82 | Plate? Safety,Explosion Or Burning | 2 |
| 22***80 | Plate? Instruction,Battery? Distributor Plate | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Battery) (English)(#311329-)
| 20***90 | Plate | 2 |
| 22***80 | Plate? Instruction,Battery? Distributor Plate | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Battery) (Spanish)(#310001-311328)
| 09***20 | Case? Plate | 1 |
| 09***31 | Plate | 1 |
| 20***20 | Plate | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Battery) (Spanish)(#311329-)
| 09***81 | Plate? Caution,Keep A Safe Distance | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Arabic)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***50 | Plate | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (English)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (English) (Lettering Type)
| 09***00 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (French)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Persian)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***80 | Plate | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Spanish) (Lettering Type)
| 09***00 | Plate? Safety,Window Automatic Lock | 1 |
| 20***90 | Plate | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Turkish)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***20 | Plate | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (French)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***70 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (Persian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***00 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (Spanish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***20 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***40 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (French)
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (Persian)
| 41***70 | Plate? Safety,(Torkey) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (Spanish)
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (French)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***20 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (Persian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***70 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (Spanish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Komatsu Logo (Boom And Counter Weight)
| 09***50 | Plate? Mark | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Komatsu Logo (Boom And Counter Weight) (North America Standard)
| 09***50 | Plate? Mark | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Komatsu Logo (Counter Weight)
| 09***50 | Plate? Mark | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Lifting Capacity Chart
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Lifting Capacity Chart (English)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Lifting Capacity Chart (English) (Lettering Type)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Lifting Capacity Chart (Spanish) (Lettering Type)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Lubrication Chart (100 Hours Greasing Type)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Lubrication Chart (500 Hours Greasing Type)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (English) (Lettering Type)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Safety,Keep Out Of Turning Area | 1 |
| 09***01 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (French)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Persian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Spanish) (Lettering Type)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***01 | Mark Plate | 1 |
| 09***01 | Plate? Safety,(For South And North America) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Turkish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Plate (12v Power Source) (English)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Plate (Multi Pattern) (Iso/Backhoe)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***20 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Plate (Swing Or Backing Up Warning)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Plate (Swing Or Backing Up Warning) (English)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Arabic)
| 09***7B | Plate? Safety,Acc. (Except The Americas) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (English)
| 09***63 | Plate? Instruction,(For Persian) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (French)
| 09***00 | Plate? Safety,(English) (Lettering Type) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Persian)
| 09***7B | Plate? Safety,Acc. (Except The Americas) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Spanish)
Komatsu : Pc200lc-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Turkish)
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Miscellaneous
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Additional Step (For Wide Shoe)
| 01***60 | Capscrew | 8 |
| 01***13 | Nut,(For Adjustable Rod) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 16 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Arm)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
| 07***40 | Flange,Split (For Shipping) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Arm) (For 1-Actuator)
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Body)
| 01***32 | Washer, (Without Emergency Steering) | 32 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 7 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Body) (For 1-Actuator)
| 01***32 | Washer, (Without Emergency Steering) | 36 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 7 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom Cylinder)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
| 07***40 | Flange,Split (For Shipping) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom) (For 1-Actuator)
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom) (For 1-Actuator) (For Component)
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom) (For Component)
| 01***32 | Washer, (Without Emergency Steering) | 32 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 6 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Miscellaneous : Fuel Refill Pump
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
Operator'S Compartment And Control System
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Air Conditioner
| 01***75 | Capscrew | 3 |
| 01***85 | Bolt - M8 X 85lg | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Air Conditioner (Blower And Duct) (Large Air Flow Type)(#310001-310312)
| 01***10 | Bolt - Relay And Flasher Mounting | 1 |
| 01***20 | Bolt,See Fig. K4010-11a0 | 1 |
| 01***65 | Bolt | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Air Conditioner (Blower And Duct) (Large Air Flow Type)(#310313-)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Air Conditioner And Heater Less
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***12 | Plug,(With Canvas Or Rops Canopy) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (Arabic)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (English)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (French)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (Persian)
| 20***63 | Cab Ass'Y,(Vandalism? Komtrax) | 1 |
| 20***64 | Cab Ass'Y,(Vandalism? Komtrax) | 1 |
| 20***52 | Cab Ass'Y,(Vandalism Protection) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (Russian)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Floor Mat
| 01***12 | Bolt | 3 |
| 01***16 | Bolt,L.H | 2 |
| 20***90 | Collar | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Floor Mat (For 1-Actuator)
| 01***12 | Bolt | 3 |
| 01***16 | Bolt,L.H | 2 |
| 20***90 | Collar | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Floor Mat (For 2-Actuator)
| 01***12 | Bolt | 3 |
| 01***16 | Bolt,L.H | 2 |
| 20***90 | Collar | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Floor Mounts
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Front Full Guard
| 01***40 | Bolt | 1 |
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***25 | Bolt | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Front Guard
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Half Guard
| 01***45 | Bolt | 4 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 4 |
| 20***32 | Guard | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Heater
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Mode Selection Connectors
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Mode Selection Connectors (High-Altitude Arrangement) (3800 Meter)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Mode Selection Connectors (High-Altitude Arrangement) (4600 Meter)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Mode Selection Connectors (High-Altitude Arrangement) (5000 Meter)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window)
| 20***32 | Cab Ass'Y,(Big Wind Air Conditioner) | 1 |
| 20***33 | Cab Ass'Y,(Big Wind Air Conditioner) | 1 |
| 20***34 | Cab Ass'Y,(Big Wind Air Conditioner) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window) (For Kal)
| 01***12 | Screw | 4 |
| 01***16 | Screw,(With Payload Meter) | 4 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window) (For Vandalism Protection)
| 20***22 | Cab Ass'Y,(Without Air Conditioner) | 1 |
| 20***23 | Cab Ass'Y,(Without Air Conditioner) | 1 |
| 20***12 | Cab Ass'Y | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window) (With Large Air Flow Type Air Conditioner)
| 01***16 | Screw | 7 |
| 01***16 | Screw | 6 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Conditioner And Komtrax Controller)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***40 | Bolt (Op) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Conditioner And Komtrax Controller) (Orbcom Type)
| 19***70 | Hose | 1 |
| 20***90 | Valve | 1 |
| 20***91 | Grommet | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Conditioner Controller)
| 01***25 | Bolt,See Fig. K4010-65a0 | 1 |
| 01***32 | Washer, (Without Emergency Steering) | 1 |
| 20***11 | Lever,R.H | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct)
| 01***16 | Bolt,L.H | 2 |
| 08***76 | Band | 1 |
| 20***10 | Collar | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct) (With Air Conditioner)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct) (With Large Air Flow Type Air Conditioner)(#310001-310825)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***35 | Bolt | 2 |
| 01***45 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct) (With Large Air Flow Type Air Conditioner)(#310826-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 5 |
| 01***25 | Screw | 4 |
| 01***16 | Washer | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***08 | Screw,(For Tops Canopy) | 2 |
| 01***08 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate) (For Kal)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***45 | Screw | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate) (With Air Conditioner)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***08 | Screw,(For Tops Canopy) | 2 |
| 01***08 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate) (With Large Air Flow Type Air Conditioner)
| 07***10 | Plug,(With Payload Meter) | 2 |
| 07***26 | Clamp,Hose | 1 |
| 07***28 | Hose | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Main Harness Clamp) (For Kal)
| 01***16 | Bolt - Box Mounting | 6 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***16 | Screw | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Main Harness Clamp)(#310001-310681)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Main Harness Clamp)(#310682-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 02***08 | O-Ring (Kit) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover) (For Kal)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover) (With Air Conditioner)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover) (With Heater)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor Cover)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***08 | Screw,(For Tops Canopy) | 2 |
| 01***08 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor Duct)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Partition And Filter)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***35 | Cap, Terminal | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Partition And Filter) (With Air Conditioner)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***35 | Cap, Terminal | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover) (With 12v Converter)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover) (With 12v Converter) (For Kal)
| 01***12 | Screw | 3 |
| 01***20 | Screw | 1 |
| 01***20 | Capscrew | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover) (With Komtrax)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Sub Plate And Relay)
| 01***10 | Bolt - Relay And Flasher Mounting | 9 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
| 01***60 | Bolt, Mounting | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Sub Plate And Relay) (For Kal)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***36 | Tie, Cable | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door Lock)
| 01***25 | Bolt | 3 |
| 01***12 | Screw | 4 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door Lock) (For Kal)
| 01***20 | Bolt | 1 |
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door)
| 01***16 | Screw,(With Payload Meter) | 2 |
| 01***16 | Screw | 6 |
| 01***16 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door) (For Kal)
| 01***25 | Bolt | 3 |
| 01***12 | Screw | 4 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door) (For Vandalism Protection)
| 01***12 | Screw (2) | 2 |
| 01***16 | Screw (Without Radio) (1) | 8 |
| 01***12 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (1st. Attachiment Control)
| 01***12 | Screw | 3 |
| 01***20 | Screw | 1 |
| 01***20 | Capscrew | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (2nd. Attachiment Control)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Hose Blind Parts) (With Heater)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Hose)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Unit Less Cover)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Unit)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? L.H.)
| 10***30 | Cap | 1 |
| 20***30 | Switch | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? L.H.) (For Kal)
| 10***30 | Cap | 1 |
| 20***40 | Switch | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? R.H.)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? R.H.) (For Kal)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Base)
| 01***30 | Bolt,(Not Used When Towing Winch) | 5 |
| 01***25 | Screw | 4 |
| 01***16 | Washer | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? L.H.)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***30 | Bolt - M8 X 30lg | 10 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? L.H.) (For Kal)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***30 | Bolt - M8 X 30lg | 10 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? R.H.)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? R.H.) (For Kal)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? R.H.) (With Large Air Flow Type Air Conditioner)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Foot Rest? L.H.)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 02***08 | O-Ring (Kit) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Foot Rest? R.H.)
| 01***16 | Bolt - Box Mounting | 5 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Frame)
| 01***25 | Bolt,See Fig. K4010-65a0 | 1 |
| 01***32 | Washer, (Without Emergency Steering) | 1 |
| 20***21 | Lever,(R.H.) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness Clamp And Earth)
| 01***12 | Bolt | 1 |
| 20***90 | Plate | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***35 | Cap, Terminal | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (For Kal)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (With Large Air Flow Type Air Conditioner)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***36 | Tie, Cable | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (With Orbcom Type Komtrax)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***35 | Cap, Terminal | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (With Overload Alarm)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***36 | Tie, Cable | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Heater Hose Less)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Heater Hose)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Heater Hose) (With Heater)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever And Valve? L.H.) (For Kal)
| 20***70 | Hose? 1500mm | 1 |
| 20***90 | Hose? 3000mm | 1 |
| 20***30 | Hose? 2900mm | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever And Valve? R.H.) (For Kal)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever? L.H.)
| 08***36 | Band,(For 2nd Travel Speed) (Op) | 1 |
| 08***36 | Tie, Cable | 1 |
| 08***23 | Tie, Cable | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever? R.H.)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Hose Clamp)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio Less)
| 20***21 | Switch | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio) (For Asia)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio) (For Kal)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio) (For U.S.A.)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Piping For Pilot Valve)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Piping For Pilot Valve) (For Additional Piping)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C.Piping For Travel Valve)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P? T Block And Seal)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P? T Block And Seal) (1 Actuator)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P? T Block And Seal) (2 Actuator)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Rear Camera Cable)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Switch) (For Kal)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Travel Control)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 02***08 | O-Ring (Kit) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? L.H.)
| 20***70 | Hose? 1500mm | 1 |
| 20***90 | Hose? 3000mm | 1 |
| 20***30 | Hose? 2900mm | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? L.H.) (For Heatproof)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? R.H.)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? R.H.) (For Heatproof)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Window Washer Hose)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Front Lower Window)
| 01***20 | Bolt - Mount Risers To Cab Floor | 12 |
| 20***21 | Door Ass'Y | 1 |
| 20***32 | Hinge | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Front Lower Window) (For Kal)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***12 | Screw,Sems | 6 |
| 01***16 | Screw | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Front Window)
| 01***16 | Screw | 7 |
| 01***16 | Screw | 6 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Front Window) (For Kal)
| 01***16 | Screw | 7 |
| 01***16 | Screw | 6 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Komtrax Film Antenna And Galeo Plate) (Orbcom Type)
| 01***20 | Bolt | 1 |
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Komtrax Film Antenna And Galeo Plate) (Orbcom Type) (For Kal)
| 01***20 | Bolt | 1 |
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Komtrax Film Antenna And Galeo Plate) (Orbcom Type) (For Vandalism Protection)
| 01***20 | Bolt | 1 |
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Open Lock And Door Catch)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
| 01***16 | Screw | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Open Lock And Door Catch) (For Kal)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
| 01***16 | Screw | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Plug Bolt And Galeo Plate)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
| 01***16 | Screw | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Plug Bolt And Galeo Plate) (For Vandalism Protection)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Puressure Valve And Grip)
| 01***12 | Bolt,(See Fig. K0210-16a0) | 2 |
| 20***20 | Seal (Bonded) | 1 |
| 20***41 | Seal (Bonded) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Puressure Valve And Grip) (For Kal)
| 01***16 | Bolt,L.H | 2 |
| 08***76 | Band | 2 |
| 17***30 | Element,Air | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Puressure Valve And Grip) (With Air Conditioner)
| 01***25 | Bolt, Sems | 9 |
| 01***23 | Washer,(Without Air Con.) | 9 |
| 20***60 | Seat | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Roof Cover And Air Intake)
| 01***16 | Screw,(With Payload Meter) | 2 |
| 01***16 | Screw | 6 |
| 01***16 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Roof Cover And Air Intake) (For Kal)
| 01***25 | Bolt, Sems | 9 |
| 01***23 | Washer,(Without Air Con.) | 9 |
| 20***60 | Seat | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Roof Ventilator)
| 01***25 | Screw | 2 |
| 01***16 | Bolt,L.H | 3 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Roof Ventilator) (For Kal)
| 01***20 | Screw | 2 |
| 01***20 | Screw | 2 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Speaker And Window Washer)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Speaker And Window Washer) (For Kal)
| 01***16 | Screw | 1 |
| 01***23 | Washer | 1 |
| 20***72 | Lighter, Cigarette | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Wiper And Room Lamp)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Wiper And Room Lamp) (For Kal)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Highback Air Suspension Type)
| 01***20 | Screw | 2 |
| 01***25 | Bolt | 4 |
| 08***19 | Band - Tie Hose To Wire Harness | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Pvc Leather)
| 01***25 | Bolt, Sems | 4 |
| 01***25 | Bolt | 4 |
| 01***32 | Washer | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Rigid Type)
| 01***25 | Bolt, Sems | 4 |
| 01***25 | Bolt | 4 |
| 01***32 | Washer | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Suspension Type)
| 01***25 | Bolt | 4 |
| (2***2) | Seat Ass'Y,(See Fig. Y1570-01h1) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Suspension Type) (For North America)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Rain Visor
| 01***12 | Screw | 4 |
| 01***20 | Bolt | 4 |
| 20***20 | Retainer | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Seat Belt (50mm Wide)
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Seat Belt (78mm Wide)
| 01***32 | Washer | 2 |
| 02***51 | Bolt | 2 |
| 09***02 | Washer,(For Shipping) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Seat Belt (78mm Wide) (Non-Cinching)
| 01***32 | Washer | 2 |
| 02***57 | Bolt | 2 |
| 09***02 | Washer,(For Shipping) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Sun Visor
| 01***16 | Screw,(With Payload Meter) | 4 |
| 01***16 | Screw | 1 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Top Guard
| 01***80 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***20 | Bolt | 2 |
| 01***12 | Screw | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Operator'S Compartment And Control System : Window Washer
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Service Kit And Component Parts
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Air Cleaner (Inner Part) : Unit_02_of_02
| 60***30 | Plate? Instruction,Count Sticker For Air Cleaner | 1 |
| 60***50 | Valve, Vacuator | 1 |
| 60***20 | Cover Ass'Y | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Air Cleaner (Inner Part) : Unit_01_of_02
| 60***30 | Plate? Instruction,Count Sticker For Air Cleaner | 1 |
| 60***50 | Valve, Vacuator | 1 |
| 60***20 | Cover Ass'Y | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Air Conditioner Unit
| 20***11 | Air Conditioner | 1 |
| ND***52 | Plate | 1 |
| ND***60 | Clamp | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Arm Cylinder (100 Hours Lubricating)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Arm Cylinder (100 Hours Lubricating) (Burst Valve)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Arm Cylinder (500 Hours Lubricating)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Arm Cylinder (500 Hours Lubricating) (For Arm Crane)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 04***35 | Bowl, Check Valve | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (L.H.) (100 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (L.H.) (100 Hours Lubricating) (Burst Valve)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (L.H.) (500 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (L.H.) (500 Hours Lubricating) (For Arm Crane And With Burst Valve
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (L.H.) (500 Hours Lubricating) (Large Diameter Type)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (R.H.) (100 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (R.H.) (100 Hours Lubricating) (Burst Valve)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (R.H.) (500 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (R.H.) (500 Hours Lubricating) (For Arm Crane And With Burst Valve)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (R.H.) (500 Hours Lubricating) (Large Diameter Type)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Bucket Cylinder (100 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Bucket Cylinder (500 Hours Lubricating) : Unit_01_of_02
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Bucket Cylinder (500 Hours Lubricating) : Unit_02_of_02
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Burst Valve (For Boom Cylinder) (For Arm Crane)
| 01***20 | Screw | 2 |
| 01***25 | Screw | 2 |
| 01***35 | Bolt | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Filter (Inner Parts)
| 20***81 | Filter Ass'Y | 1 |
| 20***91 | Filter | 1 |
| 70***90 | O-Ring | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Fuel Self Charge Pump (Inner Parts)
| 20***11 | Pump Ass'Y,Refuelling | 1 |
| 20***90 | Adapter | 2 |
| 20***30 | Cable Kit | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Lock Valve
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
| 07***24 | O-Ring | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (1/11)
| 04***22 | Bolt, Eye - Lifting | 1 |
| 07***09 | O-Ring | 1 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (10/11)
| 01***08 | Nut (Op) | 1 |
| 07***34 | O-Ring,(F2370-57a0 -42 ) | 1 |
| 70***80 | Valve Ass'Y | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (11/11)
| 01***35 | Screw | 6 |
| 07***08 | O-Ring | 2 |
| 07***08 | Ring,Back-Up | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (2/11)
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 5 |
| 70***40 | Orifice | 2 |
| 70***50 | Plug | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (3/11)
| 04***25 | Ring,(W/Emergency Steering) (1m?1d) | 1 |
| 70***61 | Seal, Oil | 1 |
| 70***60 | Spacer | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (4/11)
| (****0) | Ring,Wire | 1 |
| (****0) | Seat | 1 |
| (****0) | Seal | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (5/11)
| (****5) | O-Ring | 1 |
| (****0) | Bolt | 4 |
| (7***0) | Pump Ass'Y | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (6/11)
| 04***22 | Bolt, Eye - Lifting | 1 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 2 |
| 07***34 | O-Ring,(F2370-57a0 -42 ) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (7/11)
| (****1) | Seat | 1 |
| (****0) | Retainer,Shoe | 1 |
| (****0) | Piston Sub Ass'Y | 9 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (8/11)
| (****0) | Ring,Wire | 1 |
| (****0) | Seat | 1 |
| (****0) | Seal | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (9/11)
| (****0) | Ring | 1 |
| (****5) | O-Ring | 1 |
| (****0) | Bolt | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (1/21)
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 12 |
| 70***60 | Ball | 8 |
| 72***10 | Spring | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (10/21)
| 01***45 | Bolt | 14 |
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (11/21)
| 07***07 | O-Ring - (K10) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***07 | Ring,Back-Up | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (12/21)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 72***00 | Valve Ass'Y,Suction | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (13/21)
| 01***35 | Screw | 4 |
| 01***16 | Capscrew | 1 |
| 01***55 | Bolt | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (14/21)
| 01***60 | Capscrew | 1 |
| 01***70 | Bolt | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (15/21)
| 01***25 | Screw | 4 |
| 01***80 | Bolt | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (16/21)
| 01***75 | Bolt | 4 |
| 07***10 | O-Ring | 2 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (17/21)
| 01***70 | Bolt | 4 |
| 07***24 | O-Ring | 1 |
| 72***10 | Block | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (18/21)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (19/21)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (2/21)
| 07***24 | O-Ring | 3 |
| 72***11 | Case | 1 |
| 72***30 | Plug | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (20/21)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 1 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (21/21)
| 01***80 | Bolt | 4 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (3/21)
| 07***24 | O-Ring | 2 |
| 72***11 | Case | 2 |
| 72***30 | Plug | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (4/21)
| 01***20 | Bolt | 22 |
| 07***24 | O-Ring | 2 |
| 07***80 | O-Ring | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (5/21)
| 07***12 | O-Ring, Divider Valve Mounting | 16 |
| 07***21 | O-Ring (Kit) | 5 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (6/21)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 8 |
| 70***20 | O-Ring | 8 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (7/21)
| 01***90 | Bolt,(Without Cab) | 4 |
| 01***55 | Bolt | 4 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (8/21)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (9/21)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1/17)
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (10/17)
| 01***45 | Bolt | 14 |
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (11/17)
| 07***07 | O-Ring - (K10) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***07 | Ring,Back-Up | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (12/17)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 72***00 | Valve Ass'Y,Suction | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (13/17)
| 01***35 | Screw | 4 |
| 01***16 | Capscrew | 1 |
| 01***55 | Bolt | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (14/17)
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (15/17)
| 01***25 | Screw | 4 |
| 01***80 | Bolt | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (16/17)
| 01***75 | Bolt | 4 |
| 07***10 | O-Ring | 2 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (17/17)
| 01***70 | Bolt | 4 |
| 01***80 | Bolt | 4 |
| 07***10 | O-Ring | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (1/23)
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 12 |
| 70***60 | Ball | 8 |
| 72***10 | Spring | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (10/23)
| 01***45 | Bolt | 14 |
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (11/23)
| 07***07 | O-Ring - (K10) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***07 | Ring,Back-Up | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (12/23)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 72***00 | Valve Ass'Y,Suction | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (13/23)
| 01***35 | Screw | 4 |
| 01***16 | Capscrew | 1 |
| 01***55 | Bolt | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (14/23)
| 01***60 | Capscrew | 1 |
| 01***70 | Bolt | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (15/23)
| 01***25 | Screw | 4 |
| 01***80 | Bolt | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (16/23)
| 01***75 | Bolt | 4 |
| 07***10 | O-Ring | 2 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (17/23)
| 01***70 | Bolt | 4 |
| 07***24 | O-Ring | 1 |
| 72***10 | Block | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (18/23)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (19/23)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (2/23)
| 07***24 | O-Ring | 3 |
| 72***20 | Plug | 1 |
| 72***11 | Case | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (20/23)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (21/23)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (22/23)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 1 |
| 72***00 | Valve Ass'Y | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (23/23)
| 01***80 | Bolt | 4 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (3/23)
| 07***24 | O-Ring | 2 |
| 72***11 | Case | 2 |
| 72***30 | Plug | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (4/23)
| 01***20 | Bolt | 22 |
| 07***24 | O-Ring | 2 |
| 07***80 | O-Ring | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (5/23)
| 07***12 | O-Ring, Divider Valve Mounting | 16 |
| 07***21 | O-Ring (Kit) | 5 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (6/23)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 8 |
| 70***20 | O-Ring | 8 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (7/23)
| 01***90 | Bolt,(Without Cab) | 4 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (8/23)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (9/23)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2/17)
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (3/17)
| 07***24 | O-Ring | 2 |
| 72***11 | Case | 2 |
| 72***30 | Plug | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (4/17)
| 01***20 | Bolt | 22 |
| 07***24 | O-Ring | 2 |
| 07***80 | O-Ring | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (5/17)
| 07***12 | O-Ring, Divider Valve Mounting | 16 |
| 07***21 | O-Ring (Kit) | 5 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (6/17)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 8 |
| 70***20 | O-Ring | 8 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (7/17)
| 01***90 | Bolt,(Without Cab) | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (8/17)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (9/17)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Operator'S Seat Ass'Y
| 20***02 | Seat Ass'Y | 1 |
| AS***22 | Hi Riser Spring Kit,Height Riser | 1 |
| AS***18 | Tether Belt Kit | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Operator'S Seat Ass'Y (High Back) (Suspension)
| 20***02 | Seat Ass'Y | 1 |
| AS***32 | Back Foam Kit | 1 |
| AS***22 | Hi Riser Spring Kit,Height Riser | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Operator'S Seat Ass'Y (Pvc Leather)
| 20***00 | Seat Ass'Y | 1 |
| AS***22 | Hi Riser Spring Kit,Height Riser | 1 |
| AS***18 | Tether Belt Kit | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Operator'S Seat Ass'Y (Suspension)
| 20***02 | Seat Ass'Y | 1 |
| AS***22 | Hi Riser Spring Kit,Height Riser | 1 |
| AS***99 | Damper Kit | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For 1-Attachment)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 01***12 | Bolt | 3 |
| 07***08 | O-Ring,(Tm8202-005) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For 2-Attachment)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 70***30 | Ppc Valve, Assembly | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For Travel) (1/2)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***55 | Screw | 2 |
| 01***06 | Screw | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For Travel) (2/2)
| 01***35 | Bolt | 3 |
| 01***23 | Washer,(For Shipping) | 3 |
| 07***07 | O-Ring - (K10) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For Work Equipment)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***30 | Pilot Valve | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For Work Equipment) (For Heatproof)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***10 | Pilot Valve | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Quick Coupler Valve
| 20***40 | Coil | 1 |
| 20***70 | Block | 1 |
| 20***80 | Valve,Pressure Reducing | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Rubber Antenna
| 19***10 | Rubber Antenna,(See Fig. Y1062-01a0) | 1 |
| EP***03 | Spring Washer | 2 |
| EP***01 | Wing Bolt | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Safety Valve (175? 210? 250? 280 Kg/Cm2)
| 07***24 | O-Ring | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 1 |
| 72***00 | Valve Ass'Y,(210kg/Cm2) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Safety Valve (280/175? 280/210? 280/250 Kg/Cm2)
| 07***24 | O-Ring | 1 |
| 72***01 | Valve Ass'Y,Suction And Safety | 1 |
| 72***00 | Valve Ass'Y,(280/250kg/Cm2) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Selector Valve
| 01***30 | Bolt | 2 |
| 01***40 | Screw | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 1-Actuator)(1/3)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 1-Actuator)(2/3)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 1-Actuator)(3/3)
| 07***24 | O-Ring | 2 |
| 72***00 | Valve Ass'Y | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 2-Actuator)(1/3)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 2-Actuator)(2/3)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 2-Actuator)(3/3)
| 07***24 | O-Ring | 1 |
| 72***00 | Valve Ass'Y | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Shoe Bolt And Nut Service Kit
| 13***21 | Nut (Y0320-K4) | 200 |
| 20***41 | Shoe Bolt And Nut K | 1 |
| 20***51 | Shoe Bolt And Nut K | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Solenoid Valve (Inner Parts) : Unit_01_of_02
| 07***08 | O-Ring,(Tm8202-005) | 3 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Solenoid Valve (Inner Parts) : Unit_02_of_02
| 07***08 | O-Ring,(Tm8202-005) | 3 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Machinery Ass'Y (For Supply)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***45 | Bolt,(With Water Separator Type) | 12 |
| 01***40 | Capscrew | 18 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Motor (1/3)
| 01***50 | Bolt,(Not Used When With Cab) | 6 |
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***34 | O-Ring,(For Front Attachment) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Motor (2/3)
| 04***18 | Ring,Snap (Without R.P.C.U.) | 1 |
| 04***20 | Ring, Snap | 1 |
| 70***80 | Seal,Oil | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Motor (3/3)
| 01***25 | Screw | 2 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Swivel Joint(#310001-311720)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Swivel Joint(#311721-)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Track Link Ass'Y (98 Set) (Supply Parts)
| 20***10 | Track Link Ass'Y,60 | 1 |
| 20***41 | Bushing? Regular,Regular | 94 |
| 20***71 | Bushing? Master,Master | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Travel Motor (1/2)
| 01***35 | Screw | 12 |
| 07***06 | O-Ring,(Not Shown) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Travel Motor (2/2)
| 04***25 | Ring, Snap | 1 |
| 70***91 | Seal,Oil | 1 |
| 70***30 | Spacer? 3.2mm | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Valve (For Accumulator)
| 01***32 | Washer, (Without Emergency Steering) | 1 |
| 02***13 | Union | 1 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Work Equipment Lever (1/2) (L.H.) (For Kal)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***20 | Pilot Valve | 1 |
| 70***20 | Valve Ass'Y,(L.H.) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Work Equipment Lever (1/2) (R.H.) (For Kal)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***20 | Pilot Valve | 1 |
| 70***10 | Valve Ass'Y,(R.H.) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Work Equipment Lever (2/2) (L.H.) (For Kal)
Komatsu : Pc200lc-8(S/N 310001-Up) : Service Kit And Component Parts : Work Equipment Lever (2/2) (R.H.) (For Kal)
| 70***01 | Lever Sub Ass'Y,(R.H.) | 1 |
| (7***0) | Valve Ass'Y,(R.H.) | 1 |
Swing Circle And Related Parts
Komatsu : Pc200lc-8(S/N 310001-Up) : Swing Circle And Related Parts : Swing Circle
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 01***60 | Washer | 36 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Swing Circle And Related Parts : Swing Machinery (Gauge And Drain Piping)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Swing Circle And Related Parts : Swing Machinery (Motor And Machinery)
| 01***45 | Bolt,(With Water Separator Type) | 12 |
| 01***40 | Capscrew | 18 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Swing Circle And Related Parts : Swivel Joint
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Travel And Lower Piping
Komatsu : Pc200lc-8(S/N 310001-Up) : Travel And Lower Piping : Final Drive
| 01***60 | Capscrew | 36 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Travel And Lower Piping : Travel Piping
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 02***22 | Hose | 2 |
| 02***21 | Hose | 2 |
Under Carriage
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Carrier Roller
| 13***21 | Nut (Y0320-K4) | 392 |
| 20***40 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 94 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Front Idler
| 07***60 | O-Ring,(F4350-59a0 -6 ) | 2 |
| 07***24 | Plug | 1 |
| 19***02 | Floating Seal Ass'Y | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Full Roller Guard
| 01***50 | Bolt - Differential Carrier | 16 |
| 01***60 | Flat Washer - M20 (Hardened) | 16 |
| 20***60 | Guard | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion) (For North America/Australia)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion) (For North America/Australia) (Improve Of Rust Prevention)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion) (Improve Of Rust Prevention)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion) (Improve Of Rust Prevention) (Level 1)
| 01***45 | Washer,(Without R.O.P.S.) | 72 |
| 20***60 | O-Ring | 2 |
| 20***16 | Track Roller Ass'Y | 18 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Track Frame
| 01***65 | Bolt,(Without Rops) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Track Frame (With Full Roller Guard)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 20***20 | Cover | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Track Roller
| 01***80 | Screw | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| 11***86 | Floating Seal Ass'Y | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Track Roller Guard
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Track Shoe (Swamp Type) (860mm Wide)
| 13***21 | Nut (Y0320-K4) | 392 |
| 20***50 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 94 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (600mm Wide)
| 13***21 | Nut (Y0320-K4) | 392 |
| 20***11 | Track Shoe Ass'Y,70 | 1 |
| 20***41 | Bushing? Regular,Regular | 94 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (700mm Wide)
| 13***21 | Nut (Y0320-K4) | 392 |
| 20***21 | Track Shoe Ass'Y,80 | 1 |
| 20***41 | Bushing? Regular,Regular | 94 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (800mm Wide)
| 13***21 | Nut (Y0320-K4) | 392 |
| 20***31 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 94 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (900mm Wide)
| 01***65 | Bolt,(Without Rops) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Under Carriage : Under Cover (For Track Frame)
| 01***50 | Bolt - Differential Carrier | 32 |
| 01***15 | Nut (Op) | 18 |
| 01***45 | Washer,(Without R.O.P.S.) | 36 |
Work Equipment
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (1.8m) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (1.8m) (500 Hours Greasing Type) (For 1-Actuator)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
| 20***30 | Link | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (1.8m) (500 Hours Greasing Type) (For South Africa)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.4m) (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.4m) (100 Hours Greasing Type) (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.4m) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.4m) (500 Hours Greasing Type) (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (100 Hours Greasing Type) (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (100 Hours Greasing Type) (For 1-Actuator) (For Kal)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
| 20***30 | Link | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (500 Hours Greasing Type) (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (500 Hours Greasing Type) (For 1-Actuator) (For North America)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (Heavy Duty) (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (Heavy Duty) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (Heavy Duty) (500 Hours Greasing Type) (For North America)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (Quick Coupler Line) (For Kal)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***10 | Adapter,(Welded) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (Additional Piping) (For 1-Actuator) (For 1.8m Arm)
| 01***20 | Bolt,(For Mono Lever Steering) | 10 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***50 | Capscrew | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (Additional Piping) (For 1-Actuator) (For 2.9m Arm)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Cylinder Hose And Spacer) (For 2.9m Arm)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Cylinder Hose) (For 1-Actuator) (For 2.9m Arm)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Cylinder Hose) (For 2.4m Arm) (For Turkey)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Link) : Unit_02_of_02
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Link) : Unit_01_of_02
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
| 20***30 | Link | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Link) (For 1.8m And 2.4m Arm)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Link) (For 2.9m Arm)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm Cylinder (100 Hours Greasing Type)
| (7***0) | Cylinder Ass'Y,(Final Coating) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm Cylinder (500 Hours Greasing Type)
| (7***0) | Cylinder Group,(Final Coating) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm Cylinder (For Burst Valve)
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Arm Cylinder (With Arm Crane) (500 Hours Greasing Type)
| (7***0) | Cylinder Ass'Y,(Final Coating) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (5.7m Boom) (500 Hours Greasing Type)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 2 |
| 07***90 | Seal,Dust (Kit) | 2 |
| 20***52 | Bracket (Welded) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (5.7m Boom) (Heavy Duty) (100 Hours Greasing Type)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 2 |
| 07***90 | Seal,Dust (Kit) | 2 |
| 20***52 | Bracket (Welded) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (5.7m Boom) (Heavy Duty) (500 Hours Greasing Type)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 2 |
| 07***90 | Seal,Dust (Kit) | 2 |
| 20***52 | Bracket (Welded) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Additional Lines)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***75 | Bolt - Tube Mounting | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Arm And Bucket Cylinder Lines)
| 01***30 | Bolt,(Not Used When Towing Winch) | 26 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Arm And Bucket Cylinder Lines) (With Arm Crane)
| 01***30 | Bolt,(Not Used When Towing Winch) | 9 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Arm Lock Valve Line)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Arm Lock Valve)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***95 | Capscrew | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Attachment Plug)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 4 |
| 07***20 | Plug,(For Without Center Guard) | 16 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Lubricating Line And Harness)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 04***12 | Clamp | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Lubricating Line And Working Lamp)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Quick Coupler Line) (For Kal)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***09 | Nut,(For Japan) | 24 |
| 01***32 | Washer,(With Auto Emergency Steering) | 36 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Top Pin And Arm Cylinder Bottom Pin) (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom (Top Pin And Arm Cylinder Bottom Pin) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (100 Hours Greasing Type)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,L.H | 1 |
| (7***0) | Cylinder Group,R.H | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (500 Hours Greasing Type)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,R.H. (Final Coating) | 1 |
| (7***0) | Cylinder Group,L.H. (Final Coating) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (500 Hours Greasing Type) (For Shipping)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,L.H. (Final Coating) | 1 |
| (7***0) | Cylinder Group,R.H. (Final Coating) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (For Burst Valve)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 6 |
| 20***51 | Spacer? 2.0mm | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (Large Diameter Type) (500 Hours Greasing Type)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (With Arm Crane)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,R.H. (Final Coating) | 1 |
| (7***0) | Cylinder Group,L.H. (Final Coating) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom Cylinder Head Pin (100 Hours Greasing Type)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 6 |
| 20***21 | Spacer? 1.0mm | 4 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom Cylinder Head Pin (500 Hours Greasing Type)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 6 |
| 20***70 | Spacer? 1.5mm | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Boom Cylinder Head Pin (For Large Diameter Type Cylinder) (500 Hours Greasing Type)
| (7***0) | Cylinder Group,(Final Coating) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (Accumulator Related Parts) (For Krupp)
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (Adapter Parts) (For Krupp)
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (For Atlas And Okada)
| 20***80 | Plug,For Hb1200 | 2 |
| 20***30 | Adapter | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (For Matsuda And Furukawa)
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (For Nippon Pneumatic)
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket (Hook)
| 20***50 | Plug | 2 |
| 20***40 | Adapter | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket (O-Ring And Spacer)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket (Spacer)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 0.5m3? 750mm (Horizontal Pin Type)
| 01***60 | Capscrew | 12 |
| 01***16 | Nut - M20 | 4 |
| 01***19 | Nut - M24 | 12 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 0.5m3? 750mm (Vertical Pin Type)
| 20***90 | Bolt | 1 |
| 20***10 | Collar | 2 |
| 20***10 | Bucket,Slope Finishing | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 0.6m3? 865mm (Vertical Pin Type)
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 0.8m3? 1150mm (Horizontal Pin Type)
| 20***70 | Hook (Welded) | 1 |
| 20***40 | Plate (Welded) | 1 |
| 20***50 | Bracket (Welded) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 0.8m3? 1150mm (Horizontal Pin Type) (Strengthened)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 0.8m3? 1150mm (Vertical Pin Type)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 0.9m3? 1200mm (Horizontal Pin Type)
| 20***80 | Plug,For Hb1200 | 2 |
| 20***30 | Adapter | 2 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 0.9m3? 1200mm (Vertical Pin Type)
| 20***30 | Spacer? 1.5mm | 2 |
| 20***80 | O-Ring | 2 |
| 20***40 | Spacer? 0.8mm | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 1.0m3? 1330mm (Horizontal Pin Type)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 1.0m3? 1330mm (Vertical Pin Type)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 1.17m3? 1450mm (Horizontal Pin Type)
| 20***72 | Tooth | 6 |
| 20***82 | Pin | 6 |
| 20***91 | Lock | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Bucket? 1.17m3? 1450mm (Vertical Pin Type)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Clamshell Bucket
| 01***16 | Nut - M20 | 4 |
| 09***08 | Pin,(Without Pin Puller) | 3 |
| 17***30 | Point,(For Multi Ripper) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Ditch Cleaning Bucket? 0.8m3? 1800mm
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Finishing Bucket
| 01***16 | Nut - M20 | 4 |
| 09***08 | Pin,(Without Pin Puller) | 3 |
| 17***30 | Point,(For Multi Ripper) | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Parts For Less Arm
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Parts For Less Bucket
| 01***30 | Nut | 8 |
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 3 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Ripper Bucket? 0.61m3? 950mm
| 20***20 | Plate (Welded) | 1 |
| 20***30 | Plate,(L.H.) (Welded) | 1 |
| 20***40 | Plate,(R.H.) (Welded) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Single Shank Ripper
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 20***70 | Tooth | 6 |
| 20***20 | Adapter (Welded) | 6 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Three Shank Ripper
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***80 | Cutter,(L.H.) | 1 |
Komatsu : Pc200lc-8(S/N 310001-Up) : Work Equipment : Trapezoidal Bucket
| 01***05 | Bolt | 3 |
| 01***10 | Nut,(Without Air Conditioner) | 6 |
| 01***16 | Nut - M20 | 4 |
PC200LC-8(S/N 310001-UP) serial number reference
On the PC200LC-8 the machine ID plate sits on the operator's cab area (commonly cited as the lower right side, near the cab step), with the serial also stamped into the main frame; exact plate position and stamped-frame location can vary by source, so treat the cab-mounted plate as the primary reference and use a frame stamp only as a backup if the plate is missing or damaged. Read the machine serial as stamped - this family has no letter prefix, so the plain number (310001 and up) is the identifier Komatsu uses to bound this production block in its parts and shop manuals. The engine has its own serial plate on the block, separate from the machine plate, and both are needed when ordering engine-specific parts.
| Prefix | Identifies | Notes |
|---|---|---|
| 310001 | PC200LC-8 base (-8) production block, long/wide (LC) undercarriage | Serial run opens at 310001 and is documented through 315645 in Komatsu parts diagrams (arm assembly), then continues past 315646-UP under the same family with a mid-run parts change to swing motor internals - a running change, not a new model. Fitted with the Komatsu SAA6D107E-1B engine, net output about 110 kW (148 HP) at 2000 rpm, rated to EPA Tier 3 / EU Stage IIIA. Catalog entries for this block show arm options of 1.8 m, 2.4 m, and 2.9 m; confirm exact arm/boom fitment for a specific unit with your dealer using the full serial. No distinct 3-character alpha PIN prefix is documented for this family; the numeric serial break (310001) itself is what parts and shop manuals use to bound this production run. Single-source items here (exact swing-motor cutover point, full arm/boom option matrix) - confirm with dealer. |
Frequently asked questions
What engine does the Komatsu PC200LC-8 (S/N 310001-UP) use?
It runs the Komatsu SAA6D107E-1 — a water-cooled, turbocharged and aftercooled inline-six diesel with common-rail electronic fuel injection, rated at roughly 110 kW (148 HP) net at 2000 rpm. This is the same base engine family used across the PC200-8 generation, calibrated to the emissions standard for this unit's home market.
What is the operating weight of the Komatsu PC200LC-8 (S/N 310001-UP)?
Operating weight for this long-undercarriage configuration runs roughly 20.6-21.5 tonnes (45,500-47,300 lb), varying by boom/arm combination, counterweight, and attachments fitted. Treat this as a range and check the machine's option plate for exact figures before load-chart or transport work.
What replaced the Komatsu PC200LC-8 (S/N 310001-UP)?
Within the same -8 generation, Komatsu issued an interim PC200-8M0 update, then replaced the line outright with the PC200-10 generation as the full model-change successor. Both steps carried the platform's emissions compliance forward while keeping it in the same 20-ton class.
What PC200LC-8(S/N 310001-UP) owners discuss
What engine is in the PC200LC-8 (S/N 310001-up), and how does it behave in real-world use?
This serial range runs the SAA6D107E-1 turbocharged, direct-injection, 6-cylinder diesel (bore x stroke 107 x 124 mm, displacement about 6.69 L), rated in the neighborhood of 110 kW (148 HP) class at 2000 rpm net - exact gross/net figures vary by rating standard and dash suffix, so treat published horsepower as a class figure, not a guarantee for one unit. Operators generally rate it well for fuel economy and low-end torque. One high-utilization fleet running these engines around the clock in debarker/harvester service reported rising oil consumption after roughly 7,000 hours, traced to carbon buildup on the pistons - an extreme duty cycle, not a typical failure pattern, but it argues for tracking oil consumption trends and pulling oil samples on any high-hour unit rather than waiting for a smoking exhaust to tell you something's wrong.
Owners describe a 'weak stick' or slow arm/boom - what's usually behind it?
The complaint shows up as the arm or boom feeling soft, slow to move, and worse under load, sometimes alongside a boom that lags after the machine has been running a couple hours. Techs checking this at the quick-test ports commonly find relief pressure reading well under the factory figure for the mode selected, front and rear pump pressures otherwise normal. The fault tree that gets used: confirm the load-sensing signal is actually reaching the pump regulator, check the compensator valve in the control valve stack for wear or sticking, and rule out an internally collapsed hydraulic hose restricting flow before condemning the pump itself. Pressure specs and relief settings vary by mode (power/economy) and by production changes within the -8 series, so compare readings against the shop manual table for this exact machine rather than a number from another unit.
A PC200-8 lost every hydraulic function after a hose repair - what typically causes that?
A recurring pattern in field reports: a hose blows during work, gets replaced, fluid gets topped off, and the machine runs fine for a bit before functions get jerky and then die altogether with no engine fault codes showing. Main pump pressures can still read normal at idle while every PPC (pilot) function reads at or near zero, pointing to a loss of pilot supply pressure rather than a pump or engine problem. Checks that narrow it down: the safety lockout switch in the armrest, fuses, and the solenoids on the pump and PPC manifold, then the pressure-reducing valve that feeds the solenoid manifold - a low output there (well under the roughly 3.4-3.5 MPa / 35 kgf/cm2 pilot supply spec) starves every pilot-operated function at once. Because this involves pressure-reducing valve adjustment and pilot circuit safety devices, have your dealer verify the reducing valve setting and lockout switch operation before returning the machine to work.
What electrical or sensor faults come up most on these machines?
Monitor fault history commonly shows charging-system codes (alternator output reading low, or a code active even with battery voltage in range, pointing to a sensor or wiring fault rather than the alternator), engine oil pressure sensor codes triggered by a signal voltage outside the normal window, and coolant temperature sensor codes from an open or shorted signal circuit. On higher-hour machines the root cause is frequently mundane - corroded connectors or chafed wiring at harness grommets where looms pass through metal panels, aggravated by vibration over time - rather than a failed control module. Because an oil pressure sensor fault can mask a real low-pressure condition or trigger unnecessary engine protection derates, have your dealer verify the sensor reading against a mechanical gauge before assuming it is a sensor problem alone.
What undercarriage and travel/swing wear patterns are typical for this machine?
Track shoe and chain life is commonly cited in the roughly 2,000-4,000 hour range in normal digging conditions, trending toward the low end in abrasive, rocky, or clay-heavy ground and toward the high end on softer material - actual life varies a lot by application and ground engaging tool choice, so treat any single number as a starting estimate. On the travel and swing side, weak travel - especially when it shows up mainly under load or when swinging and traveling at the same time - gets traced to a worn swivel (center) joint seal letting pressure bypass internally, a worn final drive/travel motor, or a relief valve out of adjustment in that circuit, rather than a main pump problem. Checking travel motor case drain and pressure at the test port against spec is the usual next step before condemning a final drive.
What fuel system issues come up with this common-rail engine?
The SAA6D107E-1's common-rail injectors are sensitive to fuel cleanliness - contaminated fuel or a neglected primary/water-separator and secondary filter are the most frequently cited causes of rough idle, black smoke, power loss, or hard/no-start complaints on these engines, ahead of injector failure as a root cause in its own right. Voltage and resistance checks at the injector connector are a standard diagnostic step when chasing a misfire, but exact spec values differ by ECM calibration, so confirm against the shop manual for this serial range rather than a generic figure. Keeping the water separator drained and filters changed on a schedule matched to local fuel quality is the most commonly repeated preventive advice.
What should a buyer check on a used PC200LC-8 (S/N 310001-up)?
Weigh hours against application rather than the number alone - a machine worked in easy dirt racks up hours differently than one in rock or demolition. Walk the undercarriage and measure track sag and pin/bushing elongation rather than eyeballing it. Cycle each cylinder (boom, arm, bucket) to full stroke and hold under load to check for drift indicating packing or control-valve bypass. Pull the monitor's fault code history and hour meter trend, and check engine oil consumption and any oil analysis history if available - rising consumption on a high-hour unit is a known pattern on this engine family. Check the travel motors and swing motor for weeping shaft seals, and check hydraulic temperature and pressures at the test ports against the shop manual table for this range rather than a generic PC200-8 figure, since relief settings and pump calibration vary by production change within the series. This generation runs Tier 3 / Stage IIIA emissions without a diesel particulate filter or regen cycle, unlike some later Tier 4 PC200-8 variants, which simplifies the exhaust side of the inspection. Have your dealer or an independent tech verify hydraulic test-port readings and run a compression or blow-by check before you finalize the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Komatsu PC200LC-8(S/N 310001-UP). Related factory variants of the same model family:
PC200LC-8(S/N 300001-UP (ecot3; Overseas Version))
Need a specific PC200LC-8(S/N 310001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.