Komatsuhydraulic excavatormedium (pc100 - pc270)
Komatsu PC200-8(S/N 310001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu PC200-8 is a 20-tonne class crawler hydraulic excavator produced from approximately 2007 through 2012, positioned as the domestic-specification variant distinct from the ecot3 overseas series. It is powered by the Komatsu SAA6D107E-1, a 6.69 L (408 cu in) six-cylinder turbocharged and air-to-air aftercooled direct-injection diesel engine featuring a high-pressure common-rail fuel system, rated at 110 kW (148 hp net) at 2,000 rpm and compliant with U.S. EPA Tier 3 and EU Stage IIIA emissions standards. Operating weight runs from approximately 19,750 to 20,010 kg (43,540–44,115 lb) depending on undercarriage configuration and shoe width. Available variants include the standard-gauge PC200-8 and the wider-track long-undercarriage PC200LC-8, both offered in standard boom/stick configurations as well as optional long-reach and two-piece boom arrangements, with stick options at 2,410 mm (short) and 2,925 mm (long). The PC200-8 carries the Komatsu GALEO branding, which Komatsu used across its 2000s excavator lineup to denote its fuel-efficiency and emissions-focused generation.
The PC200-8 followed the PC200-7, which used an earlier engine and mechanical-era hydraulics, adopting instead the SAA6D107E-1 with electronic fuel-quantity and timing control, cutting NOx output while improving fuel economy in P-mode at full productivity. Komatsu integrated an intelligent HydrauMind hydraulic architecture that automatically matches pump output to implement load, reducing waste during light and repetitive cycles. The operator environment was substantially upgraded with an LCD colour monitor, improved cab sound damping, vibration-isolated mounts, and an Electronic Monitoring and Management System (EMMS) giving real-time access to service-hour data and diagnostic fault codes. In the used and parts market the PC200-8 commands durable demand: the fleet of machines built over the model's production run is large enough to sustain a dense aftermarket for main pump components, SAA6D107E-1 engine assemblies, and HydrauMind control-valve sections, while the Tier 3 engine architecture avoids the Diesel Particulate Filter complications that raised ownership cost on the succeeding PC200-8M0 (which bridged to Tier 4 Interim). Buyers trading in the used market typically price serviceable machines in this serial range according to undercarriage wear percentage and high-pressure common-rail injector health, both of which directly reflect maintenance discipline.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu PC200-8(S/N 310001-UP) specifications
Engine
| Model | Komatsu SAA6D107E-1 (6-cylinder, 4-cycle, water-cooled, direct injection, turbocharged and aftercooled common-rail diesel) |
| Displacement | 6.69 L (408 cu in); bore × stroke 107 × 124 mm |
| Gross power | 116 kW (155 hp) at 2,000 rpm |
| Net power | 110 kW (148 hp) at 2,000 rpm |
| Emissions tier | US EPA Tier 3 / EU Stage IIIA |
| Rated speed | 2,000 rpm |
Weights
| Operating weight — std undercarriage with 800 mm shoes (standard config) | 20,010 kg (44,114 lb) |
| Operating weight — 700 mm shoes | 19,750 kg (43,541 lb) |
| Operating weight — 600 mm shoes | 19,500 kg (42,990 lb) |
| Operating weight — 500 mm shoes | 19,400 kg (42,769 lb) |
| Ground pressure — 800 mm shoe (std) | 34.3 kPa (0.35 kgf/cm²) |
| Ground pressure — 700 mm shoe | 39.2 kPa (0.40 kgf/cm²) |
| Ground pressure — 600 mm shoe | 45.1 kPa (0.46 kgf/cm²) |
| Ground pressure — 500 mm shoe | 53.0 kPa (0.54 kgf/cm²) |
| Transport weight | Not separately stated in available sources; operating weight as above applies to working configuration |
Dimensions
| Transport length — with long arm (Stick Option 2 / 2,925 mm arm) | 9,480 mm (31 ft 1 in) |
| Transport length — with short arm (Stick Option 1 / 2,410 mm arm) | ~8,730 mm (28 ft 8 in); varies by configuration |
| Transport width (overall track width, 800 mm shoes) | 2,800 mm (9 ft 2 in) |
| Transport height (top of cab) | 3,040–3,190 mm (9 ft 11 in – 10 ft 5 in); varies by boom stow position |
| Tail swing radius | 2,750 mm (9 ft 0 in) |
| Counterweight clearance from ground | 1,085 mm (3 ft 7 in) |
| Ground clearance (undercarriage) | 440 mm (1 ft 5 in) |
| Track gauge (center to center) | 2,200 mm (7 ft 3 in) |
| Track length on ground (contact length) | 3,275 mm (10 ft 9 in) |
| Standard track shoe width | 800 mm (31.5 in) triple-grouser; optional 500 / 600 / 700 mm shoes available |
| Undercarriage overall track length | 4,070 mm (13 ft 4 in) |
Performance
| Max digging depth — Stick Option 1 (short arm, 2,410 mm) | 6,095 mm (20 ft 0 in) |
| Max digging depth — Stick Option 2 (long arm, 2,925 mm) | 6,620 mm (21 ft 9 in) |
| Max reach at ground level — Stick Option 1 | 9,190 mm (30 ft 2 in) |
| Max reach at ground level — Stick Option 2 | 9,700 mm (31 ft 10 in) |
| Max loading (dump) height — Stick Option 1 | 6,890 mm (22 ft 7 in) |
| Max loading (dump) height — Stick Option 2 | 7,110 mm (23 ft 4 in) |
| Max cutting (digging) height — Stick Option 1 | 9,800 mm (32 ft 2 in) |
| Max cutting (digging) height — Stick Option 2 | 10,000 mm (32 ft 10 in) |
| Max vertical wall digging depth — Stick Option 1 | 5,430 mm (17 ft 10 in) |
| Max vertical wall digging depth — Stick Option 2 | 5,980 mm (19 ft 7 in) |
| Swing speed | 12.4 rpm |
| Swing torque | 67,665 Nm (49,907 lb-ft) |
| Travel speed (3-range) | Low 3.0 km/h / Mid 4.1 km/h / High 5.5 km/h (1.9 / 2.5 / 3.4 mph) |
| Gradeability | 70% (35°) |
| Max drawbar pull | 178 kN (40,120 lbf; 18,200 kgf) |
| Main hydraulic pump flow (combined) | 439 L/min (116 US gal/min) |
| Main relief pressure (work circuit) | 37.3 MPa (5,400 psi) |
| Swing circuit relief pressure | 28.9 MPa (4,190 psi) |
Forces
| Bucket digging force — ISO 6015, standard (without Power Max) | 138 kN (14,100 kgf / 31,090 lbf) — measured with 2,925 mm arm |
| Bucket digging force — with Power Max function (8.5-second boost) | 149 kN (15,200 kgf / 33,510 lbf) |
| Arm (stick) digging force — ISO 6015, standard (without Power Max) | 101 kN (10,300 kgf / 22,710 lbf) — measured with 2,925 mm arm |
| Arm (stick) digging force — with Power Max function | 108 kN (11,000 kgf / 24,250 lbf) |
| Note on stick option variation | Forces listed are for the 2,925 mm (long) arm. The 2,410 mm short arm yields higher arm crowd force but lower bucket reach; specific ISO values for short arm not separately published in available spec sheets. |
Service capacities (summary)
| Fuel tank | 400 L (105.7 US gal) |
| Hydraulic system total (tank capacity) | 135 L (35.7 US gal) |
| Swing drive gear oil (each) | 6.6 L (1.7 US gal) |
| Engine oil (including filter) | 23.1 L (6.1 US gal) |
| Cooling system (coolant) | 20.4 L (5.4 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PC200-8(S/N 310001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — SAA6D107E-1 | 23.1 L (6.1 US gal) refill; 25.4 L (6.7 US gal) total with filter | Komatsu Genuine Engine Oil EO10W-30DH (preferred, covers −30 °C to +40 °C) or EO15W-40DH (covers −15 °C to +50 °C). Both meet API CH-4/CI-4 or higher and Komatsu KES 07.112.3/DH standard. EO15W-40DH is the standard-temperature recommendation; EO10W-30DH is preferred when ambient drops below −15 °C. Do not use non-DH (non-low-emission) engine oils. |
| Cooling system (engine + radiator) | 20.4 L (5.4 US gal) — some sources state 21 L (5.5 US gal); treat as approximately 20–21 L | Komatsu Genuine Coolant AF-ACL (pre-mixed antifreeze/coolant, ethylene-glycol based, long-life OAT-type). Use at the concentration specified in the OMM for the expected minimum ambient temperature; typically a 30–50% antifreeze concentration. Do not mix with other coolant types. Change interval per OMM is approximately every two years or 4,000 hours. |
| Fuel tank | 400 L (105.7 US gal) | Ultra-low-sulfur diesel (ULSD) or equivalent meeting local fuel standards. Komatsu OMM specifies diesel fuel conforming to ASTM D975 No. 2-D or equivalent; No. 1-D or winter-blend diesel permissible in cold climates below −15 °C. Sulfur content must be within limits compatible with the Tier 3 aftertreatment of the SAA6D107E-1 engine. |
| Hydraulic system — tank (refill capacity) | 135 L (35.7 US gal) | Komatsu Genuine Hydraulic Oil HO46-HM (ISO VG 46, anti-wear zinc-free type, pour point −30 °C, suitable for ambient −20 °C to +40 °C). This is the standard recommendation for general operating temperatures. In extremely cold climates (below −20 °C) consult the OMM cold-weather hydraulic oil provisions. |
| Hydraulic system — total circuit (tank + actuators + lines) | approximately 232 L (61.3 US gal) total system; 135 L (35.7 US gal) is the serviceable tank fill quantity | Same as hydraulic tank: Komatsu Genuine HO46-HM. Do not intermix hydraulic fluid grades. |
| Final drive (travel reduction) — each side | 3.3 L (0.87 US gal) per side for service/top-up; dry fill approximately 3.5 L (0.92 US gal) per side | Komatsu Genuine Powertrain Oil TO30 (SAE 30, meets Komatsu KES 07.868.1 and TO-4 performance level). TO10 (SAE 10W) may be specified in the OMM for extremely cold climates below −20 °C. Change interval per OMM is 1,000 hours initial, then every 2,000 hours. |
| Swing machinery (swing reduction gear) case | 6.6 L (1.74 US gal) service refill; dry fill approximately 7.1 L (1.88 US gal) | Komatsu Genuine Powertrain Oil TO30 (SAE 30, KES 07.868.1 / TO-4). TO10 alternative for extreme cold per OMM. Change interval per OMM is 1,000 hours initial, then every 2,000 hours. |
| Damper case (engine coupling/torsional damper) | Approximately 0.65 L (0.17 US gal) | Komatsu Genuine Powertrain Oil TO30 (SAE 30, same spec as swing/final drive). Verify in the specific OMM section; this compartment is serviced on the same schedule as other TO30 circuits. |
| Grease — all lubrication points (pins, bushings, swing bearing, track rollers, etc.) | Quantity as required per greasing interval and point count listed in the OMM lubrication chart | Komatsu Genuine Grease G2-LI (NLGI No. 2 lithium-based multipurpose EP grease, suitable for −10 °C to +60 °C ambient) for standard conditions. Komatsu G2-T (Hyper grease, lithium-complex/moly-type) is the premium alternative also listed in the OMM for heavy-duty or high-temperature pin applications. Use G2-LI or G2-T; do not substitute with general-purpose non-EP greases. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu PC200-8(S/N 310001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the PC200-8(S/N 310001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis for the PC200-8
The SAA6D107E-1's high-pressure common-rail circuit is highly sensitive to fuel and oil contamination. Enroll in Komatsu's KOWA (Oil and Wear Analysis) program and pull engine-oil, hydraulic-oil, and travel-reduction-oil samples at every 250-hour engine service. Use the RULER antioxidant test on hydraulic oil to extend the standard change interval only when oil chemistry supports it. Monitor the EMMS service meter and fault-code log at each PM stop — injector balance rates and pilot-pressure drift codes are early predictors of costly main pump and high-pressure injector failures specific to this engine and hydraulic platform.
Corrective & Common Repairs on the PC200-8
Common field repairs centre on three systems. First, the common-rail injectors are prone to balance-rate divergence after 8,000–10,000 hours; a misfiring cylinder typically presents as rough idle, black smoke, or a CA fault code — replace the full set together to avoid atomisation mismatches. Second, the main pump servo and swashplate bearings wear progressively, showing as slow cycle times and elevated return-line temperatures. Third, boom- and stick-cylinder rod seals degrade in abrasive environments; inspect chrome rods for scoring at every 1,000-hour service and replace seals before rod damage forces a re-chrome.
Overhaul & Rebuild Points for the PC200-8
Plan the first major decision point around 10,000–12,000 hours. The SAA6D107E-1 typically reaches its rebuild threshold based on blow-by measurement, compression drop across cylinders, and KOWA metal-trend data; an in-frame overhaul (rings, liners, rod bearings) is commonly viable if the block and crankshaft are undamaged. The swing reduction gearbox and final-drive planetary sets warrant inspection for tooth-face spalling at 8,000 or more hours. The swing bearing raceway should be measured for clearance at each 1,000-hour interval — once clearance exceeds OEM limits the 20-tonne structure load accelerates wear rapidly and bearing replacement becomes unavoidable.
Seasonal & Environmental Servicing for the PC200-8
In cold climates below −15 °C (5 °F), switch to lighter-viscosity Komatsu EO10W-30DH engine oil and confirm hydraulic oil viscosity suits the minimum start temperature — ISO VG32 may be needed below −20 °C (−4 °F). Extend warm-up idle to allow the HydrauMind pilot system to reach operating pressure before loading the boom. In high-dust environments (quarry, demolition), halve the air pre-cleaner service interval to 25 hours and check the inner safety element more frequently. In coastal or high-humidity conditions, grease all undercarriage pin joints and the swing bearing more aggressively — at every 30–40 hours — and inspect the EMMS harness connectors for corrosion at each quarterly service.
PC200-8(S/N 310001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 207-60-71181 | Element,Air Cleaner | Air intake service | Check fitment → |
| 09637-90263 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
| 09637-30263 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
| 09637-30163 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 17M-911-3530 | Element,Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PC200-8(S/N 310001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CA559 | Common rail pressure low error — low pressure detected in the common rail fuel circuit | Worn or failing high-pressure fuel supply pump; clogged fuel pre-filter or water separator; leaking pressure limiter or injector return lines; air ingestion in the low-pressure fuel supply circuit | Check fuel pre-filter and water separator condition; verify actual rail pressure via the monitor's common-rail pressure function; if pressure is confirmed low, inspect for fuel supply restriction before condemning the high-pressure pump |
| CA2249 | Common rail pressure very low error — a more severe variant of CA559 that triggers user code E11 and causes the ECM to limit engine output while continuing operation | Same root causes as CA559 but representing a deeper pressure deficit; commonly appears together with CA559 when the high-pressure supply pump is failing or a pressure limiter is stuck open | Diagnose identically to CA559 — confirm actual rail pressure via the monitor's common-rail pressure function; when CA559 and CA2249 appear together, prioritise inspection of the high-pressure supply pump and the pressure limiter before clearing codes |
| CA227 | Sensor power supply 2 voltage abnormally high — the ECM-sourced 5 V reference supply rail (supply circuit 2) feeding engine sensors is detected above its normal range | Short to battery voltage in the 5 V sensor supply wiring; defective sensor (oil pressure, coolant temperature, or others sharing this reference rail) pulling the supply line high; damaged or corroded ECM connector pins on the supply-2 circuit | Inspect 5 V reference wiring and ECM connector pins for chafing or shorts to power; unplug sensors on the supply-2 circuit one at a time to isolate the defective unit; replace the faulty sensor or repair the harness before considering ECM replacement |
| CA689 | Engine Ne speed sensor signal abnormal — crankshaft position and speed sensor fault; ECM falls back to the backup (Bkup) speed sensor for continued engine control | Damaged or contaminated Ne sensor; incorrect sensor installation or air gap; wiring harness fault or connector corrosion on the Ne sensor circuit; defective timing relationship between crankshaft and camshaft | Verify Ne and Bkup sensor connectors are correctly and securely mated; measure sensor output signal while cranking; clean the sensor tip of ferrous debris; confirm installation gap is within specification; restore the Ne sensor signal to clear the condition |
| CA111 | ECM critical internal failure — the engine controller's self-diagnostics detected an internal hardware or memory fault | ECM internal circuit failure; memory corruption from a voltage spike or moisture ingress into the ECM housing; persistent loss of ECM supply voltage or ground continuity | Verify ECM supply voltage (nominal 24 V) and ground continuity at the ECM connector; check for moisture or corrosion at ECM connectors; if supply and ground are confirmed healthy and the code persists across restarts, the ECM requires replacement or factory-level repair |
| CA115 | Engine Ne and backup (Bkup) speed sensors both show abnormal signal simultaneously — ECM cannot derive an engine speed signal and the engine stops and will not restart | Both speed sensors or their shared wiring harness are damaged; connector corrosion or disconnection on both sensor circuits; severe flywheel ring-gear wear preventing signal generation; defective engine controller | Inspect both speed sensor connectors and the wiring harness for disconnection, corrosion, or damage; check flywheel ring-gear condition for missing or worn teeth; measure resistance and output of both sensors; if all external checks pass, suspect the engine controller itself |
| E02 | PC-EPC (pump pressure-cut electronic proportional control) system fault — an abnormality has been detected in the hydraulic pump EPC solenoid circuit and is displayed as a user code on the machine monitor | Open circuit or short circuit in the front or rear pump EPC solenoid valve wiring (logged as front and rear pump EPC solenoid circuit sub-codes); connector corrosion; failed solenoid coil winding | Read the active sub-code to identify which pump circuit is at fault; measure solenoid coil resistance; inspect the wiring harness between pump controller and solenoid for open or short circuit; if solenoid and harness pass all checks, suspect the pump controller |
| E15 | Engine sensor fault — one or more of the coolant temperature sensor, fuel pressure-related sensor, or oil pressure sensor has produced a signal outside the valid range | Failed sensor (electrical open or short in the signal circuit); corroded or damaged connector; wiring chafe between sensor and ECM; actual abnormal fluid condition generating a genuine out-of-range reading | Retrieve the accompanying CA-series sub-code to isolate the specific sensor at fault; inspect that sensor's connector and wiring; verify actual fluid condition before replacing the sensor |
| B@BCNS | Engine coolant temperature abnormally high — coolant temperature sensor signal exceeded approximately 102 °C (216 °F) while the engine was running; displayed as an action-level red warning on the machine monitor | Actual engine coolant overheating due to low coolant level, clogged radiator or oil-cooler core, failed water pump impeller, or stuck-closed thermostat; alternatively, a defective coolant temperature sensor or its circuit generating a falsely high reading | Stop machine operation immediately; allow cooling before checking coolant level and inspecting the radiator core for blockage; verify actual coolant temperature via monitor function code; clean clogged cores; if coolant level and cooling system are normal, investigate thermostat and water pump before replacing the temperature sensor |
| DXA8KA | Front pump PC-EPC solenoid valve open circuit — when the front pump EPC solenoid is commanded, no current flows and an open circuit is detected, causing loss of normal hydraulic pump pressure control on the front pump circuit | Broken wire or corroded connector in the front pump EPC solenoid circuit; failed solenoid coil (open winding); internal output driver fault within the pump controller | Measure solenoid coil resistance and compare to specification; inspect the wiring harness from pump controller to front pump solenoid for open circuit or connector damage; verify pump controller output voltage when the solenoid is commanded; replace the solenoid or repair the harness as indicated — if all external checks pass, the pump controller itself is the likely fault and requires replacement |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PC200-8(S/N 310001-UP) attachments & work tools
Buckets
The PC200-8 accommodates pin-on buckets using 80 mm (3.15 in) diameter pins; bucket widths sold for this platform range from approximately 610 mm to 1,220 mm (24 in to 48 in). General-duty struck capacities range roughly 0.54–1.07 m³ (0.7–1.4 yd³) with the standard reference bucket at approximately 1.07 m³ (1.4 yd³); heavy-duty and rock bucket options reduce usable capacity to approximately 0.8–0.93 m³ (1.0–1.2 yd³) to offset added plate thickness and wear package. Both pin-on and quick-coupler-ready buckets are available for this class; when a quick coupler is added, bucket pin geometry and width must be matched to the coupler jaw spacing.
Hydraulic Hammers / Breakers
The PC200-8 has a dedicated Breaker mode (one of five selectable working modes) that optimises engine rpm and limits hydraulic flow to a one-way circuit; the operator can select from two flow-rate presets within Breaker mode to match the specific hammer's requirement. Komatsu's own JTHB-series breakers in the approximately 900–1,400 kg (1,985–3,086 lb) operating-weight class are the manufacturer-matched range for 18–25 tonne carriers covering the PC200-8; third-party sources identify breakers with a chisel diameter of approximately 100–125 mm (4–5 in) and hydraulic flow requirements of roughly 45–140 L/min (12–37 US gpm) at 150–200 bar (2,175–2,900 psi) operating pressure as suitable for this class. An optional hydraulic breaker piping kit — complete with steel lines, hoses, standby control valve, pedal valve, and clamps — is available as a factory-option or aftermarket fit specifically for the PC200-8 stick.
Quick Couplers
The PC200-8 accepts quick couplers sized for the 80 mm (3.15 in) pin and 16–25 tonne machine class; both mechanical pin-lock and hydraulic (operator-cab-controlled) coupler types are offered for this pin standard by multiple manufacturers. Komatsu's own fully automatic symmetric coupler range is listed as a genuine Komatsu attachment option for this size class. When any coupler is fitted, the machine's attachment mode (ATT) should be engaged to supply bidirectional flow for coupler actuation; using a coupler also adds approximately 200–350 kg to the front-end weight and reduces effective bucket capacity, requiring a re-check of lift chart limits.
Thumbs and Grapples
Hydraulic and mechanical thumbs sized for 20-tonne excavators with 80 mm pins mount directly to the PC200-8 stick via weld-on or bolt-on brackets; commercially available hydraulic thumbs for this class use the same 80 mm pin interface. Rotating hydraulic sorting and demolition grapples are also produced for the PC200 class and require the machine's two-way Attachment mode; the operator can select from multiple flow presets in Attachment mode to match grapple motor requirements. A breaker piping kit with the second-line (return) circuit must be in place for any two-way rotating tool.
Rippers
Single-shank pin-on ripper for PC200/PC210; mounts to stick tip with 80 mm pin (same as bucket). No hydraulic circuit; pin-swap from bucket. Breaks hardpan, frozen ground, root mats, light pavement. Single-shank standard; multi-shank not documented.
Hydraulic Work-Tool Circuit Notes
The PC200-8's CLSS (Closed-centre Load Sensing System) main pumps deliver a combined maximum flow of 439 L/min (116 US gpm) at up to 37.3 MPa (373 bar / 5,400 psi) implement relief pressure, but auxiliary/work-tool circuits are supplied through an optional add-on valve and piping kit that limits flow to a subset of that total. Breaker mode provides one-way flow at a selectable reduced flow preset, while Attachment mode provides two-way flow at one of multiple selectable presets, allowing operators to dial the output to match grapple, shear, or coupler requirements without dedicated relief adjustments. Machines leaving the factory without the optional auxiliary piping kit require the kit to be retrofitted before any hydraulic attachment can be operated.
All PC200-8(S/N 310001-UP) assemblies by section
Every catalogued assembly group for the Komatsu PC200-8(S/N 310001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Accessory
Komatsu : Pc200-8(S/N 310001-Up) : Accessory : Cap And Overall
| 09***50 | Overall,(Special Order) | 1 |
| 09***50 | Cap And Overall Kit | 1 |
| 09***57 | Cap,(For Japan) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Accessory : Spare Parts
| 07***60 | O-Ring,(F4350-55a0 -10 ) | 1 |
| 07***95 | O-Ring (Kit) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Accessory : Spare Parts (For Asia)
| 07***60 | O-Ring,(F4350-55a0 -10 ) | 1 |
| 07***95 | O-Ring (Kit) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Accessory : Spare Parts (Sandy And Dusty Spec.)
| 07***60 | O-Ring,(F4350-55a0 -10 ) | 1 |
| 07***95 | O-Ring (Kit) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Accessory : Tool
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***17 | Nozzle | 1 |
Cooling System
Komatsu : Pc200-8(S/N 310001-Up) : Cooling System : Cooling System (Fan Guard And After Cooler Piping)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(With Body Positioner) | 5 |
Komatsu : Pc200-8(S/N 310001-Up) : Cooling System : Cooling System (Fan Guard And After Cooler Piping) (Sandy And Dusty Spec.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(With Body Positioner) | 5 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Cooling System : Cooling System (Fuel Cooler And Blind Parts)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Cooling System : Cooling System (Fuel Cooler And Condenser) (With Air Conditioner) : Unit_02_of_02
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Cooling System : Cooling System (Fuel Cooler And Condenser) (With Air Conditioner) : Unit_01_of_02
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Cooling System : Cooling System (Oil Cooler)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Cooling System : Cooling System (Radiator)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Cooling System : Cooling System (Shroud And After Cooler)
| 01***20 | Bolt,(For Mono Lever Steering) | 24 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 20 |
Electrical System
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Additional Rear Work Lamp : Unit_01_of_02
| 01***16 | Bolt - Box Mounting | 2 |
| 01***35 | Bolt,(For Fix Position) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Additional Rear Work Lamp : Unit_02_of_02
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 08***70 | Plug, Sealing | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Additional Work Lamp (Demolition Spec.)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Additional Work Lamp (For Kal)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 08***14 | Band,(D60p) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Additional Work Lamp (With Front Guard)
| 01***20 | Bolt | 2 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 2 |
| 04***12 | Clamp | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Additional Work Lamp(#310001-311039)
| 01***30 | Bolt,R.H | 2 |
| 01***32 | Plain Washer | 2 |
| 08***10 | Clip,(With Corrosion Resistor) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Additional Work Lamp(#311040-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 04***12 | Clamp | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Battery (Large Capacity) (Wet)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Battery (Wet)
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Beacon Lamp
| 01***16 | Bolt - Box Mounting | 2 |
| 01***35 | Bolt,(For Fix Position) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Beacon Lamp (For Kal)
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Electric Wiring (Battery Case Side)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Electric Wiring (Emergency Switch) (For Kal)
| 01***20 | Bolt,Sems | 2 |
| 01***60 | Bolt | 2 |
| 01***32 | Plain Washer | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Electric Wiring (Engine Side)
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Electric Wiring (Engine Side) (With Sealed Alternator)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 13 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Electric Wiring (Main Harness) (1/2)
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 15 |
| 01***10 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Electric Wiring (Main Harness) (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***85 | Bolt,(Used With Pin Puller) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 13 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Electric Wiring (Starting Harness)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***30 | Bolt - M8 X 30lg | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Horn
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Rear View Monitoring System (1 Camera)
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Rear View Monitoring System (2 Camera)
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Rear View Monitoring System Less
Komatsu : Pc200-8(S/N 310001-Up) : Electrical System : Travel Alarm
Engine Related Parts
Komatsu : Pc200-8(S/N 310001-Up) : Engine Related Parts : Air Cleaner Connecting Parts
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***05 | Clamp | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Engine Related Parts : Air Cleaner Connecting Parts (With Pre-Cleaner)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***05 | Clamp | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Engine Related Parts : Corrosion Resistor
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Engine Related Parts : Corrosion Resistor (With Air Conditioner)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Engine Related Parts : Dumper
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 10 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Engine Related Parts : Engine Mount
| 01***55 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
Komatsu : Pc200-8(S/N 310001-Up) : Engine Related Parts : Filter Remote Piping And Main Pump
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***75 | Bolt - Tube Mounting | 1 |
Fuel Tank And Related Parts
Komatsu : Pc200-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Line (Drain Piping)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***75 | Bolt - Tube Mounting | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Line (Drain Piping) (For Fuel Refill Pump)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***75 | Bolt - Tube Mounting | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Line (Drain Piping) (With Pre-Fuel Filter And Water Separator)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Line (Fuel Supply Piping)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Line (Fuel Supply Piping) (With Pre-Fuel Filter And Water Separator)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Tank
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Fuel Tank And Related Parts : Fuel Tank (For Fuel Refill Pump)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Guard
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Battery Case
| 20***30 | Sheet | 1 |
| 42***40 | Clamp | 1 |
| 42***60 | Bolt | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Battery Case (With Fuel Refill Pump)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Counter Weight (3730kg)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***08 | Screw | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Counter Weight (3730kg) (For Kal)
| 01***30 | Bolt,(Not Used When Towing Winch) | 47 |
| 01***12 | Screw | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 40 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Counter Weight (3730kg) (With Rear View Camera)
| 20***20 | Plate | 4 |
| 20***10 | Plate? 1.6mm,1.6mm | 2 |
| 20***30 | Bolt | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Counter Weight Mounting
| 01***30 | Bolt,(Not Used When Towing Winch) | 47 |
| 01***12 | Screw | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 40 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : H00d
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
| 01***16 | Washer,(For 35a Alternator) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Handrail
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Hood (Net)
| 01***30 | Bolt,R.H | 2 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 22 |
| 01***32 | Plain Washer | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Machine Cab Cover
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 21 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Machine Cab Cover (Cover) (With Pre Cleaner)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 22 |
| 01***16 | Screw | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Machine Cab Cover (For 2-Actuator)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 22 |
| 01***16 | Screw | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Machine Cab Cover (Pre Cleaner) (With Pre Cleaner)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 26 |
| 01***16 | Screw | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Machine Cab Frame
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***60 | Sheet | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Machine Cab Frame (With Pre-Cleaner)
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***60 | Sheet | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Partition (Left Side)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Partition (Left Side) (With Air Conditioner)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Partition (Left Side) (With Corrosion Resistor)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Partition (Left Side) (With Corrosion Resistor) (With Air Conditioner)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Partition (Middle) (With Air Conditioner)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Partition (Valve And Muffler Side) (With Air Conditioner)
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 12***20 | Cap | 10 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Rear View Mirror (For Counter Weight) : Unit_02_of_02
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***08 | Screw | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Rear View Mirror (For Counter Weight) : Unit_01_of_02
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***30 | Screw | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Rear View Mirror? L.H.
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 20***91 | Hand Rail | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Rear View Mirror? R.H.
| 01***30 | Screw | 2 |
| 20***30 | Clamp | 1 |
| 20***60 | Support | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Side Cover? L.H. : Unit_02_of_02
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***60 | Sheet | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Side Cover? L.H. : Unit_01_of_02
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***60 | Sheet | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Side Cover? R.H.(#310001-310222)
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Side Cover? R.H.(#310223-)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 19 |
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Under Cover (For Fuel Refill Pump) (With Water Separator)
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Under Cover (For Kal)
Komatsu : Pc200-8(S/N 310001-Up) : Guard : Under Cover (With Water Separator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 40 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 16 |
| 01***12 | Screw | 3 |
Hydraulic System
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Arm And Bucket Line
| 01***75 | Bolt | 4 |
| 07***21 | O-Ring (Kit) | 1 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Arm And Bucket Line (With Arm Holding Valve)
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Arm Drift Priventive
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? L.H.) (1-Actuator) (For Quick Coupler)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***40 | Bolt (Op) | 2 |
| 01***75 | Bolt (M10-1.50x75) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? L.H.) (For 1-Actuator)
| 01***40 | Bolt (Op) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? R.H.) (1 Actuator) (For Breaker Adapter)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? R.H.) (1-Actuator) (For Quick Coupler)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Main Line? R.H.) (For 1-Actuator)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Attachment Line (Return And Pilot Filter) (For 1-Actuator)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Attachment Lines (For 2-Actuator)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Boom Line
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 5 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Burst Valve (Boom Burst Valve)
| 01***09 | Nut,(For Japan) | 4 |
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Burst Valve (Burst Valve Line)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***85 | Bolt,(Used With Pin Puller) | 1 |
| 01***65 | Bolt | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Burst Valve (Burst Valve Line) (With Over Load Alarm)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***85 | Bolt,(Used With Pin Puller) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Burst Valve (Chassis Side)
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***85 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Burst Valve (Chassis Side) (With Arm Lock Valve)
| 01***40 | Bolt (Op) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Delivery Line
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Delivery Line (For Fuel Refill Pump)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Delivery Line (With Inline Filter)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Drain Lines
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 5 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Hydraulic Oil Tank (1-Actuator) (For Kal)
| 02***11 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 13 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Hydraulic Oil Tank (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Hydraulic Oil Tank (For 1-Actuator) (With Arm Crane)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Hydrulic Oil Tank
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Hydrulic Oil Tank (With Arm Crane)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Ls Lines : Unit_01_of_02
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Ls Lines : Unit_02_of_02
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Ls Lines (For 1-Actuator)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (Connecting Parts) (1/2)
| 02***11 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 13 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (Connecting Parts) (2/2)
| 02***08 | O-Ring (Kit) | 10 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (For 1-Actuator) (Connecting Parts) (1/2)
| 02***11 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 13 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (For 1-Actuator) (Connecting Parts) (2/2)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 02***10 | Plug | 4 |
| 02***08 | O-Ring (Kit) | 11 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (For 2-Actuator) (Connecting Parts) (1/2)
| 02***08 | O-Ring (Kit) | 7 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (For 2-Actuator) (Connecting Parts) (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***35 | Bolt,(With Rops) | 1 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (Valve Bracket And Sensor)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Control Valve (With Service Valve) (For 1-Actuator) (Connecting Parts) (2/2)
| 02***08 | O-Ring (Kit) | 12 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Pump
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Main Pump (For 1-Actuator)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | O-Ring,(Y1620-11a0a-11) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Oil Cooler Lines
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Pressure Switch Block
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Quick Coupler Lines (1 Actuator) (For Kal)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Return Line
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 02***08 | Hose | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Return Line (For 1-Actuator)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve Piping)
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve Piping) (For 1-Actuator)
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve Piping) (For 2-Actuator)
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
| 01***35 | Bolt,(With Rops) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve) (For 1 And 2-Actuator)
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Suction Line(#310001-310006)
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***25 | Capscrew | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Suction Line(#310007-)
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***40 | Bolt | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Swing Lines
| 02***15 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 7 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Hydraulic System : Travel Line
| 02***15 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 6 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
Main/Revolving Frame And Related Parts
Komatsu : Pc200-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Boom Foot Pin (100 Hours Greasing Type)
Komatsu : Pc200-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Komatsu : Pc200-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame (For Fuel Refill Pump)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Komatsu : Pc200-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame (For Fuel Refill Pump) (With Deck Guard)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Komatsu : Pc200-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame (For Kal)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Main/Revolving Frame And Related Parts : Revolving Frame (With Deck Guard)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Marks And Plates
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (1-Accumulator)
| 09***00 | Plate? Safety,(English) (Lettering Type) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (1-Accumulator) (English)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (1-Accumulator) (Spanish)
| 22***90 | Plate,Warning Of Moving Machine | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (2-Accumulator)
| 09***00 | Plate? Safety,(English) (Lettering Type) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (2-Accumulator) (English)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (2-Accumulator) (Spanish)
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Arm)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate? Warning | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Battery) (English And Turkish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Battery) (Spanish)(#310001-311328)
| 20***90 | Plate | 2 |
| 22***80 | Plate? Instruction,Battery? Distributor Plate | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Battery) (Spanish)(#311329-)
| 09***81 | Plate? Caution,Keep A Safe Distance | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Arabic)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***50 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Chinese)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***20 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (English)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (English) (Lettering Type)
| 09***00 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (French)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Indonesian)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Persian)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***80 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Spanish) (Lettering Type)
| 09***00 | Plate? Safety,Window Automatic Lock | 1 |
| 20***90 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Turkish)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***20 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***70 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (Chinese)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***50 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***20 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (French)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| (****0) | Plate? Warning,Top Guard | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (Indonesian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (Persian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***40 | Plate? Warning | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Front Guard) (Spanish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***70 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (Chinese)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***50 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***20 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (French)
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (Indonesian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***00 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (Persian)
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top And Front Guard) (Spanish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***40 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***70 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (Chinese)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***50 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***20 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (French)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (Indonesian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (Persian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate? Warning | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Caution Plate (Top Guard) (Spanish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Komatsu Logo (Boom And Counter Weight)
| 09***50 | Plate? Mark | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Komatsu Logo (Counter Weight)
| 09***50 | Plate? Mark | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Lifting Capacity Chart
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Lifting Capacity Chart (English) (Lettering Type)
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Lifting Capacity Chart (Spanish) (Lettering Type)
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Lubrication Chart (100 Hours Greasing Type)
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Lubrication Chart (500 Hours Greasing Type)
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Chinese)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (English) (Lettering Type)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Safety,Keep Out Of Turning Area | 1 |
| 09***01 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (French)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Indnesian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Persian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Spanish) (Lettering Type)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***01 | Mark Plate | 1 |
| 09***01 | Plate? Safety,(For South And North America) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Mark And Name Plates (Turkish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Plate (12v Power Source) (English)
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Plate (Swing Or Backing Up Warning)
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Plate (Swing Or Backing Up Warning) (English)
| 22***10 | Decal, Socket (English) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Arabic)
| 09***63 | Plate? Instruction,(For Indonesia) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Chinese)
| 41***70 | Plate? Safety,(Torkey) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (English)
| 09***63 | Plate? Instruction,(For Arabic) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (French)
| 09***7B | Plate? Safety,Acc. (Except The Americas) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Indonesian)
| 09***7B | Plate? Safety,Acc. (Except The Americas) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Persian)
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Spanish)
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Marks And Plates : Service Instruction (Air Cleaner) (Turkish)
| 09***63 | Plate? Instruction,(For Persian) | 1 |
Miscellaneous
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Additional Step (For Wide Shoe)
| 01***60 | Capscrew | 8 |
| 01***13 | Nut,(For Adjustable Rod) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 16 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Arm)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
| 07***40 | Flange,Split (For Shipping) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Arm) (For 1-Actuator)
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Body)
| 01***32 | Washer, (Without Emergency Steering) | 32 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 7 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Body) (For 1-Actuator)
| 01***32 | Washer, (Without Emergency Steering) | 36 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 7 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom Cylinder)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
| 07***40 | Flange,Split (For Shipping) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom) (For 1-Actuator)
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom) (For 1-Actuator) (For Component)
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Blind Parts (Boom) (For Component)
| 01***32 | Washer, (Without Emergency Steering) | 32 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 6 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Miscellaneous : Fuel Refill Pump
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
Operator'S Compartment And Control System
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Air Conditioner
| 01***75 | Capscrew | 3 |
| 01***85 | Bolt - M8 X 85lg | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Air Conditioner (Blower And Duct) (Large Air Flow Type)(#310001-310312)
| 01***10 | Bolt - Relay And Flasher Mounting | 1 |
| 01***20 | Bolt,See Fig. K4010-11a0 | 1 |
| 01***65 | Bolt | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Air Conditioner (Blower And Duct) (Large Air Flow Type)(#310313-)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Air Conditioner And Heater Less
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***12 | Plug,(With Canvas Or Rops Canopy) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (Arabic)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (Chinese)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (English)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (French)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (Persian)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Fire Extinguisher (Russian)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Floor Mat
| 01***12 | Bolt | 3 |
| 01***16 | Bolt,L.H | 2 |
| 20***90 | Collar | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Floor Mat (For 1-Actuator)
| 01***12 | Bolt | 3 |
| 01***16 | Bolt,L.H | 2 |
| 20***90 | Collar | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Floor Mat (For 2-Actuator)
| 01***12 | Bolt | 3 |
| 01***16 | Bolt,L.H | 2 |
| 20***90 | Collar | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Floor Mounts
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Front Full Guard
| 01***40 | Bolt | 1 |
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***25 | Bolt | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Front Guard
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Half Guard
| 01***45 | Bolt | 4 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 4 |
| 20***32 | Guard | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Heater
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Mode Selection Connectors
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Mode Selection Connectors (High-Altitude Arrangement) (3800 Meter)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Mode Selection Connectors (High-Altitude Arrangement) (4600 Meter)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Mode Selection Connectors (High-Altitude Arrangement) (5000 Meter)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window)
| 20***32 | Cab Ass'Y,(Big Wind Air Conditioner) | 1 |
| 20***33 | Cab Ass'Y,(Big Wind Air Conditioner) | 1 |
| 20***34 | Cab Ass'Y,(Big Wind Air Conditioner) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window) (For Kal)
| 01***12 | Screw | 4 |
| 01***16 | Screw,(With Payload Meter) | 4 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window) (For Vandalism Protection)
| 20***22 | Cab Ass'Y,(Without Air Conditioner) | 1 |
| 20***23 | Cab Ass'Y,(Without Air Conditioner) | 1 |
| 20***12 | Cab Ass'Y | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window) (With Large Air Flow Type Air Conditioner)
| 01***16 | Screw | 7 |
| 01***16 | Screw | 6 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Conditioner And Komtrax Controller)
| 01***10 | Bolt - Relay And Flasher Mounting | 2 |
| 01***25 | Screw | 4 |
| 01***12 | Bolt | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Conditioner And Komtrax Controller) (Orbcom Type)
| 19***70 | Hose | 1 |
| 20***90 | Valve | 1 |
| 20***91 | Grommet | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Conditioner Controller)
| 01***25 | Bolt,See Fig. K4010-65a0 | 1 |
| 01***32 | Washer, (Without Emergency Steering) | 1 |
| 20***11 | Lever,R.H | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct)
| 01***16 | Bolt,L.H | 2 |
| 08***76 | Band | 1 |
| 20***10 | Collar | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct) (With Air Conditioner)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct) (With Large Air Flow Type Air Conditioner)(#310001-310825)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***35 | Bolt | 2 |
| 01***45 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct) (With Large Air Flow Type Air Conditioner)(#310826-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 5 |
| 01***25 | Screw | 4 |
| 01***16 | Washer | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***08 | Screw,(For Tops Canopy) | 2 |
| 01***08 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate) (For Kal)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***45 | Screw | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate) (With Air Conditioner)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***08 | Screw,(For Tops Canopy) | 2 |
| 01***08 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate) (With Large Air Flow Type Air Conditioner)
| 07***10 | Plug,(With Payload Meter) | 2 |
| 07***26 | Clamp,Hose | 1 |
| 07***28 | Hose | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Main Harness Clamp) (For Kal)
| 01***16 | Bolt - Box Mounting | 6 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***16 | Screw | 5 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Main Harness Clamp)(#310001-310681)
| 01***20 | Screw | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 1 |
| 04***08 | Clip | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Main Harness Clamp)(#310682-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 02***08 | O-Ring (Kit) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover) (For Kal)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover) (With Air Conditioner)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover) (With Heater)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor Cover)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***08 | Screw,(For Tops Canopy) | 2 |
| 01***08 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor Duct)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Partition And Filter)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***35 | Cap, Terminal | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Partition And Filter) (With Air Conditioner)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***35 | Cap, Terminal | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover) (With 12v Converter)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover) (With 12v Converter) (For Kal)
| 01***12 | Screw | 3 |
| 01***20 | Screw | 1 |
| 01***20 | Capscrew | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover) (With Komtrax)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Sub Plate And Relay)
| 01***10 | Bolt - Relay And Flasher Mounting | 9 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
| 01***60 | Bolt, Mounting | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Sub Plate And Relay) (For Kal)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***36 | Tie, Cable | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door Lock)
| 01***25 | Bolt | 3 |
| 01***12 | Screw | 4 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door Lock) (For Kal)
| 01***20 | Bolt | 1 |
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door)
| 01***16 | Screw,(With Payload Meter) | 2 |
| 01***16 | Screw | 6 |
| 01***16 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door) (For Kal)
| 01***25 | Bolt | 3 |
| 01***12 | Screw | 4 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Door) (For Vandalism Protection)
| 01***12 | Screw (2) | 2 |
| 01***16 | Screw (Without Radio) (1) | 8 |
| 01***12 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (1st. Attachiment Control)
| 01***12 | Screw | 3 |
| 01***20 | Screw | 1 |
| 01***20 | Capscrew | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (2nd. Attachiment Control)
| 01***16 | Bolt - Box Mounting | 5 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Hose Blind Parts) (With Heater)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Hose)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Unit Less Cover)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Unit)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? L.H.)
| 10***30 | Cap | 1 |
| 20***30 | Switch | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? L.H.) (For Kal)
| 10***30 | Cap | 1 |
| 20***40 | Switch | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? R.H.)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? R.H.) (For Kal)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Base)
| 01***30 | Bolt,(Not Used When Towing Winch) | 5 |
| 01***25 | Screw | 4 |
| 01***16 | Washer | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? L.H.)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***30 | Bolt - M8 X 30lg | 10 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? L.H.) (For Kal)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***30 | Bolt - M8 X 30lg | 10 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? R.H.)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? R.H.) (For Kal)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Console? R.H.) (With Large Air Flow Type Air Conditioner)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Foot Rest? L.H.)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 02***08 | O-Ring (Kit) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Foot Rest? R.H.)
| 01***16 | Bolt - Box Mounting | 5 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Frame)
| 01***25 | Bolt,See Fig. K4010-65a0 | 1 |
| 01***32 | Washer, (Without Emergency Steering) | 1 |
| 20***21 | Lever,(R.H.) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness Clamp And Earth)
| 01***12 | Bolt | 1 |
| 20***90 | Plate | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***35 | Cap, Terminal | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (For Kal)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (With Large Air Flow Type Air Conditioner)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***36 | Tie, Cable | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (With Orbcom Type Komtrax)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***35 | Cap, Terminal | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (With Overload Alarm)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***36 | Tie, Cable | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Heater Hose Less)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Heater Hose)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Heater Hose) (With Heater)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever And Valve? L.H.) (For Kal)
| 20***70 | Hose? 1500mm | 1 |
| 20***90 | Hose? 3000mm | 1 |
| 20***30 | Hose? 2900mm | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever And Valve? R.H.) (For Kal)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever? L.H.)
| 08***36 | Band,(For 2nd Travel Speed) (Op) | 1 |
| 08***36 | Tie, Cable | 1 |
| 08***23 | Tie, Cable | 5 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever? R.H.)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Hose Clamp)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio Less)
| 20***21 | Switch | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio) (For Asia)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio) (For Kal)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio) (For U.S.A.)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Piping For Pilot Valve)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Piping For Pilot Valve) (For Additional Piping)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C.Piping For Travel Valve)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P? T Block And Seal)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P? T Block And Seal) (1 Actuator)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P? T Block And Seal) (2 Actuator)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Rear Camera Cable)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Switch) (For Kal)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Travel Control)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 02***08 | O-Ring (Kit) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? L.H.)
| 20***70 | Hose? 1500mm | 1 |
| 20***90 | Hose? 3000mm | 1 |
| 20***30 | Hose? 2900mm | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? L.H.) (For Heatproof)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? R.H.)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? R.H.) (For Heatproof)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Window Washer Hose)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Front Lower Window)
| 01***20 | Bolt - Mount Risers To Cab Floor | 12 |
| 20***21 | Door Ass'Y | 1 |
| 20***32 | Hinge | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Front Lower Window) (For Kal)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***12 | Screw,Sems | 6 |
| 01***16 | Screw | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Front Window)
| 01***16 | Screw | 7 |
| 01***16 | Screw | 6 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Front Window) (For Kal)
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Komtrax Film Antenna And Galeo Plate) (Orbcom Type)
| 01***20 | Bolt | 1 |
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Komtrax Film Antenna And Galeo Plate) (Orbcom Type) (For Kal)
| 01***20 | Bolt | 1 |
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Komtrax Film Antenna And Galeo Plate) (Orbcom Type) (For Vandalism Protection)
| 01***20 | Bolt | 1 |
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Open Lock And Door Catch)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
| 01***16 | Screw | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Open Lock And Door Catch) (For Kal)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
| 01***16 | Screw | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Plug Bolt And Galeo Plate)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
| 01***16 | Screw | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Plug Bolt And Galeo Plate) (For Vandalism Protection)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 2 |
| 01***16 | Screw | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Puressure Valve And Grip)
| 01***12 | Bolt,(See Fig. K0210-16a0) | 2 |
| 20***20 | Seal (Bonded) | 1 |
| 20***41 | Seal (Bonded) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Puressure Valve And Grip) (For Kal)
| 01***16 | Bolt,L.H | 2 |
| 08***76 | Band | 2 |
| 17***30 | Element,Air | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Puressure Valve And Grip) (With Air Conditioner)
| 01***25 | Bolt, Sems | 9 |
| 01***23 | Washer,(Without Air Con.) | 9 |
| 20***60 | Seat | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Roof Cover And Air Intake)
| 01***16 | Screw,(With Payload Meter) | 2 |
| 01***16 | Screw | 6 |
| 01***16 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Roof Cover And Air Intake) (For Kal)
| 01***25 | Bolt, Sems | 9 |
| 01***23 | Washer,(Without Air Con.) | 9 |
| 20***60 | Seat | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Roof Ventilator)
| 01***25 | Screw | 2 |
| 01***16 | Bolt,L.H | 3 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Roof Ventilator) (For Kal)
| 01***20 | Screw | 2 |
| 01***20 | Screw | 2 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Speaker And Window Washer)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Speaker And Window Washer) (For Kal)
| 01***16 | Screw | 1 |
| 01***23 | Washer | 1 |
| 20***72 | Lighter, Cigarette | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Wiper And Room Lamp)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Cab (Wiper And Room Lamp) (For Kal)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Pvc Leather)
| 01***25 | Bolt, Sems | 4 |
| 01***25 | Bolt | 4 |
| 01***32 | Washer | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Rigid Type)
| 01***25 | Bolt, Sems | 4 |
| 01***25 | Bolt | 4 |
| 01***32 | Washer | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Suspension Type)
| 01***25 | Bolt | 4 |
| (2***2) | Seat Ass'Y,(See Fig. Y1570-01h1) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Rain Visor
| 01***12 | Screw | 4 |
| 01***20 | Bolt | 4 |
| 20***20 | Retainer | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Seat Belt (50mm Wide)
| 01***32 | Washer | 2 |
| 20***10 | Belt | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Seat Belt (78mm Wide)
| 01***32 | Washer | 2 |
| 02***51 | Bolt | 2 |
| 09***02 | Washer,(For Shipping) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Seat Belt (78mm Wide) (Non-Cinching)
| 01***32 | Washer | 2 |
| 02***57 | Bolt | 2 |
| 09***02 | Washer,(For Shipping) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Sun Visor
| 01***16 | Screw,(With Payload Meter) | 4 |
| 01***16 | Screw | 1 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Top Guard
| 01***80 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***20 | Bolt | 2 |
| 01***12 | Screw | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Operator'S Compartment And Control System : Window Washer
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Service Kit And Component Parts
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Air Cleaner (Inner Part) : Unit_01_of_02
| 60***30 | Plate? Instruction,Count Sticker For Air Cleaner | 1 |
| 60***50 | Valve, Vacuator | 1 |
| 60***20 | Cover Ass'Y | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Air Cleaner (Inner Part) : Unit_02_of_02
| 60***30 | Plate? Instruction,Count Sticker For Air Cleaner | 1 |
| 60***50 | Valve, Vacuator | 1 |
| 60***20 | Cover Ass'Y | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Air Conditioner Unit
| 20***11 | Air Conditioner | 1 |
| ND***52 | Plate | 1 |
| ND***60 | Clamp | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Arm Cylinder (100 Hours Lubricating)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Arm Cylinder (100 Hours Lubricating) (Burst Valve)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Arm Cylinder (500 Hours Lubricating)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Arm Cylinder (500 Hours Lubricating) (For Arm Crane)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 04***35 | Bowl, Check Valve | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (L.H.) (100 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (L.H.) (100 Hours Lubricating) (Burst Valve)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (L.H.) (500 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (L.H.) (500 Hours Lubricating) (For Arm Crane And With Burst Valve
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (R.H.) (100 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (R.H.) (100 Hours Lubricating) (Burst Valve)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (R.H.) (500 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Boom Cylinder (R.H.) (500 Hours Lubricating) (For Arm Crane And With Burst Valve)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Bucket Cylinder (100 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Bucket Cylinder (500 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Burst Valve (For Boom Cylinder) (For Arm Crane)
| 01***20 | Screw | 2 |
| 01***25 | Screw | 2 |
| 01***35 | Bolt | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Filter (Inner Parts)
| 20***81 | Filter Ass'Y | 1 |
| 20***91 | Filter | 1 |
| 70***90 | O-Ring | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Fuel Self Charge Pump (Inner Parts)
| 20***11 | Pump Ass'Y,Refuelling | 1 |
| 20***90 | Adapter | 2 |
| 20***30 | Cable Kit | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Lock Valve
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
| 07***24 | O-Ring | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (1/11)
| 04***22 | Bolt, Eye - Lifting | 1 |
| 07***09 | O-Ring | 1 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (10/11)
| 01***08 | Nut (Op) | 1 |
| 07***34 | O-Ring,(F2370-57a0 -42 ) | 1 |
| 70***80 | Valve Ass'Y | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (11/11)
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (2/11)
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 5 |
| 70***40 | Orifice | 2 |
| 70***50 | Plug | 5 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (3/11)
| 04***25 | Ring,(W/Emergency Steering) (1m?1d) | 1 |
| 70***61 | Seal, Oil | 1 |
| 70***60 | Spacer | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (4/11)
| (****0) | Ring,Wire | 1 |
| (****0) | Seat | 1 |
| (****0) | Seal | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (5/11)
| (****5) | O-Ring | 1 |
| (****0) | Bolt | 4 |
| (7***0) | Pump Ass'Y | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (6/11)
| 04***22 | Bolt, Eye - Lifting | 1 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 2 |
| 07***34 | O-Ring,(F2370-57a0 -42 ) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (7/11)
| (****1) | Seat | 1 |
| (****0) | Retainer,Shoe | 1 |
| (****0) | Piston Sub Ass'Y | 9 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (8/11)
| (****0) | Ring,Wire | 1 |
| (****0) | Seat | 1 |
| (****0) | Seal | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Pump (9/11)
| (****0) | Ring | 1 |
| (****5) | O-Ring | 1 |
| (****0) | Bolt | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (1/21)
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 12 |
| 70***60 | Ball | 8 |
| 72***10 | Spring | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (10/21)
| 01***45 | Bolt | 14 |
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (11/21)
| 07***07 | O-Ring - (K10) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***07 | Ring,Back-Up | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (12/21)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 72***00 | Valve Ass'Y,Suction | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (13/21)
| 01***35 | Screw | 4 |
| 01***16 | Capscrew | 1 |
| 01***55 | Bolt | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (14/21)
| 01***60 | Capscrew | 1 |
| 01***70 | Bolt | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (15/21)
| 01***25 | Screw | 4 |
| 01***80 | Bolt | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (16/21)
| 01***75 | Bolt | 4 |
| 07***10 | O-Ring | 2 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (17/21)
| 01***70 | Bolt | 4 |
| 07***24 | O-Ring | 1 |
| 72***10 | Block | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (18/21)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (19/21)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (2/21)
| 07***24 | O-Ring | 3 |
| 72***11 | Case | 1 |
| 72***30 | Plug | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (20/21)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 1 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (21/21)
| 01***80 | Bolt | 4 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (3/21)
| 07***24 | O-Ring | 2 |
| 72***11 | Case | 2 |
| 72***30 | Plug | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (4/21)
| 01***20 | Bolt | 22 |
| 07***24 | O-Ring | 2 |
| 07***80 | O-Ring | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (5/21)
| 07***12 | O-Ring, Divider Valve Mounting | 16 |
| 07***21 | O-Ring (Kit) | 5 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 5 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (6/21)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 8 |
| 70***20 | O-Ring | 8 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (7/21)
| 01***90 | Bolt,(Without Cab) | 4 |
| 01***55 | Bolt | 4 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (8/21)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1-Actuator) (9/21)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (1/17)
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 12 |
| 70***60 | Ball | 8 |
| 72***10 | Spring | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (10/17)
| 01***45 | Bolt | 14 |
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (11/17)
| 07***07 | O-Ring - (K10) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***07 | Ring,Back-Up | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (12/17)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 72***00 | Valve Ass'Y,Suction | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (13/17)
| 01***35 | Screw | 4 |
| 01***16 | Capscrew | 1 |
| 01***55 | Bolt | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (14/17)
| 01***60 | Capscrew | 1 |
| 01***70 | Bolt | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (15/17)
| 01***25 | Screw | 4 |
| 01***80 | Bolt | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (16/17)
| 01***75 | Bolt | 4 |
| 07***10 | O-Ring | 2 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (17/17)
| 01***70 | Bolt | 4 |
| 01***80 | Bolt | 4 |
| 07***10 | O-Ring | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (1/23)
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 12 |
| 70***60 | Ball | 8 |
| 72***10 | Spring | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (10/23)
| 01***45 | Bolt | 14 |
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (11/23)
| 07***07 | O-Ring - (K10) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***07 | Ring,Back-Up | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (12/23)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 72***00 | Valve Ass'Y,Suction | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (13/23)
| 01***35 | Screw | 4 |
| 01***16 | Capscrew | 1 |
| 01***55 | Bolt | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (14/23)
| 01***60 | Capscrew | 1 |
| 01***70 | Bolt | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (15/23)
| 01***25 | Screw | 4 |
| 01***80 | Bolt | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (16/23)
| 01***75 | Bolt | 4 |
| 07***10 | O-Ring | 2 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (17/23)
| 01***70 | Bolt | 4 |
| 07***24 | O-Ring | 1 |
| 72***10 | Block | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (18/23)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (19/23)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (2/23)
| 07***24 | O-Ring | 3 |
| 72***20 | Plug | 1 |
| 72***11 | Case | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (20/23)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (21/23)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (22/23)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 1 |
| 72***00 | Valve Ass'Y | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (23/23)
| 01***80 | Bolt | 4 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (3/23)
| 07***24 | O-Ring | 2 |
| 72***11 | Case | 2 |
| 72***30 | Plug | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (4/23)
| 01***20 | Bolt | 22 |
| 07***24 | O-Ring | 2 |
| 07***80 | O-Ring | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (5/23)
| 07***12 | O-Ring, Divider Valve Mounting | 16 |
| 07***21 | O-Ring (Kit) | 5 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 5 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (6/23)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 8 |
| 70***20 | O-Ring | 8 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (7/23)
| 01***90 | Bolt,(Without Cab) | 4 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (8/23)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2-Actuator) (9/23)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (2/17)
| 07***24 | O-Ring | 3 |
| 72***11 | Case | 1 |
| 72***30 | Plug | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (3/17)
| 07***24 | O-Ring | 2 |
| 72***11 | Case | 2 |
| 72***30 | Plug | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (4/17)
| 01***20 | Bolt | 22 |
| 07***24 | O-Ring | 2 |
| 07***80 | O-Ring | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (5/17)
| 07***12 | O-Ring, Divider Valve Mounting | 16 |
| 07***21 | O-Ring (Kit) | 5 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 5 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (6/17)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 8 |
| 70***20 | O-Ring | 8 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (7/17)
| 01***90 | Bolt,(Without Cab) | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (8/17)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Main Valve (9/17)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Operator'S Seat Ass'Y
| 20***02 | Seat Ass'Y | 1 |
| AS***22 | Hi Riser Spring Kit,Height Riser | 1 |
| AS***18 | Tether Belt Kit | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Operator'S Seat Ass'Y (Pvc Leather)
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Operator'S Seat Ass'Y (Suspension)
| 20***02 | Seat Ass'Y | 1 |
| AS***22 | Hi Riser Spring Kit,Height Riser | 1 |
| AS***99 | Damper Kit | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For 1-Attachment)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 01***12 | Bolt | 3 |
| 07***08 | O-Ring,(Tm8202-005) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For 2-Attachment)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 70***30 | Ppc Valve, Assembly | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For Travel) (1/2)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***55 | Screw | 2 |
| 01***06 | Screw | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For Travel) (2/2)
| 01***35 | Bolt | 3 |
| 01***23 | Washer,(For Shipping) | 3 |
| 07***07 | O-Ring - (K10) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For Work Equipment)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***30 | Pilot Valve | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Ppc Valve (For Work Equipment) (For Heatproof)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***10 | Pilot Valve | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Quick Coupler Valve
| 20***40 | Coil | 1 |
| 20***70 | Block | 1 |
| 20***80 | Valve,Pressure Reducing | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Rubber Antenna
| 19***10 | Rubber Antenna,(See Fig. Y1062-01a0) | 1 |
| EP***03 | Spring Washer | 2 |
| EP***01 | Wing Bolt | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Safety Valve (175? 210? 250? 280 Kg/Cm2)
| 07***24 | O-Ring | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 1 |
| 72***00 | Valve Ass'Y,(210kg/Cm2) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Safety Valve (280/175? 280/210? 280/250 Kg/Cm2)
| 07***24 | O-Ring | 1 |
| 72***01 | Valve Ass'Y,Suction And Safety | 1 |
| 72***00 | Valve Ass'Y,(280/250kg/Cm2) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Selector Valve
| 01***30 | Bolt | 2 |
| 01***40 | Screw | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 1-Actuator)(1/3)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 1-Actuator)(2/3)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 1-Actuator)(3/3)
| 07***24 | O-Ring | 2 |
| 72***00 | Valve Ass'Y | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 2-Actuator)(1/3)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 2-Actuator)(2/3)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Service Valve (For 2-Actuator)(3/3)
| 07***24 | O-Ring | 1 |
| 72***00 | Valve Ass'Y | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Shoe Bolt And Nut Service Kit
| 13***21 | Nut (Y0320-K4) | 200 |
| 20***41 | Shoe Bolt And Nut K | 1 |
| 20***51 | Shoe Bolt And Nut K | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Solenoid Valve (Inner Parts) : Unit_01_of_02
| 07***08 | O-Ring,(Tm8202-005) | 3 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Solenoid Valve (Inner Parts) : Unit_02_of_02
| 07***08 | O-Ring,(Tm8202-005) | 3 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Machinery Ass'Y (For Supply)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***45 | Bolt,(With Water Separator Type) | 12 |
| 01***40 | Capscrew | 18 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Motor (1/3)
| 01***50 | Bolt,(Not Used When With Cab) | 6 |
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***34 | O-Ring,(For Front Attachment) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Motor (2/3)
| 04***18 | Ring,Snap (Without R.P.C.U.) | 1 |
| 04***20 | Ring, Snap | 1 |
| 70***80 | Seal,Oil | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Motor (3/3)
| 01***25 | Screw | 2 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Motor (For Asia) (1/3)
| 01***50 | Bolt,(Not Used When With Cab) | 6 |
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***34 | O-Ring,(For Front Attachment) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Motor (For Asia) (2/3)
| 04***18 | Ring,Snap (Without R.P.C.U.) | 1 |
| 04***20 | Ring, Snap | 1 |
| 70***10 | Seal,Oil | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Swing Motor (For Asia) (3/3)
| 01***25 | Screw | 2 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Swivel Joint(#310001-311720)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Swivel Joint(#311721-)
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Track Link Ass'Y (90 Set) (Supply Parts)
| 20***00 | Track Link Ass'Y,60 | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
| 20***71 | Bushing? Master,Master | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Travel Motor (1/2)
| 01***35 | Screw | 12 |
| 07***06 | O-Ring,(Not Shown) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Travel Motor (2/2)
| 04***25 | Ring, Snap | 1 |
| 70***91 | Seal,Oil | 1 |
| 70***30 | Spacer? 3.2mm | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Valve (For Accumulator)
| 01***32 | Washer, (Without Emergency Steering) | 1 |
| 02***13 | Union | 1 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Work Equipment Lever (1/2) (L.H.) (For Kal)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***20 | Pilot Valve | 1 |
| 70***20 | Valve Ass'Y,(L.H.) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Work Equipment Lever (1/2) (R.H.) (For Kal)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***20 | Pilot Valve | 1 |
| 70***10 | Valve Ass'Y,(R.H.) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Work Equipment Lever (2/2) (L.H.) (For Kal)
| 70***01 | Lever Sub Ass'Y,(L.H.) | 1 |
| (7***0) | Valve Ass'Y,(L.H.) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Service Kit And Component Parts : Work Equipment Lever (2/2) (R.H.) (For Kal)
| 70***01 | Lever Sub Ass'Y,(R.H.) | 1 |
| (7***0) | Valve Ass'Y,(R.H.) | 1 |
Swing Circle And Related Parts
Komatsu : Pc200-8(S/N 310001-Up) : Swing Circle And Related Parts : Swing Circle
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 01***60 | Washer | 36 |
Komatsu : Pc200-8(S/N 310001-Up) : Swing Circle And Related Parts : Swing Machinery (Gauge And Drain Piping)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Swing Circle And Related Parts : Swing Machinery (Motor And Machinery)
| 01***45 | Bolt,(With Water Separator Type) | 12 |
| 01***40 | Capscrew | 18 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Swing Circle And Related Parts : Swing Machinery (Motor And Machinery) (For Asia)
| 01***45 | Bolt,(With Water Separator Type) | 12 |
| 01***40 | Capscrew | 18 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Swing Circle And Related Parts : Swivel Joint
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Travel And Lower Piping
Komatsu : Pc200-8(S/N 310001-Up) : Travel And Lower Piping : Final Drive
| 01***60 | Capscrew | 36 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Travel And Lower Piping : Travel Piping
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 02***20 | Hose | 2 |
| 02***19 | Hose | 2 |
Under Carriage
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Carrier Roller
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***60 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Front Idler
| 07***60 | O-Ring,(F4350-59a0 -6 ) | 2 |
| 07***24 | Plug | 1 |
| 19***02 | Floating Seal Ass'Y | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Full Roller Guard
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion) (For North America/Australia)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion) (For North America/Australia) (Improve Of Rust Prevention)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion) (Improve Of Rust Prevention)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Idler And Cushion (Idler Cushion) (Improve Of Rust Prevention) (Level 1)
| 01***45 | Washer,(Without R.O.P.S.) | 56 |
| 20***60 | O-Ring | 2 |
| 20***16 | Track Roller Ass'Y | 14 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Frame
| 01***65 | Bolt,(Without Rops) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Frame (With Full Roller Guard)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 20***20 | Cover | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Roller
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Roller Guard
| 01***50 | Bolt - Differential Carrier | 24 |
| 01***15 | Nut (Op) | 14 |
| 01***45 | Washer,(Without R.O.P.S.) | 28 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Shoe (Flat Type) (600mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***82 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Shoe (Roadliner) (600mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***40 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Shoe (Swamp Type) (860mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***71 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (500mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***51 | Track Shoe Ass'Y,60 | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (600mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***31 | Track Shoe Ass'Y,70 | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (700mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***41 | Track Shoe Ass'Y,80 | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (800mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***21 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Track Shoe (Triple Grouser) (600mm Wide) (Holes To Equip With City Pad)
| 01***65 | Bolt,(Without Rops) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Under Carriage : Under Cover (For Track Frame)
| 01***50 | Bolt - Differential Carrier | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
| 20***60 | Guard | 2 |
Work Equipment
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (1.8m) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (1.8m) (500 Hours Greasing Type) (For 1-Actuator)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
| 20***30 | Link | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (1.8m) (500 Hours Greasing Type) (For South Africa)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.4m) (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.4m) (100 Hours Greasing Type) (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.4m) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.4m) (500 Hours Greasing Type) (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (100 Hours Greasing Type) (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (100 Hours Greasing Type) (For 1-Actuator) (For Kal)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
| 20***30 | Link | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (500 Hours Greasing Type) (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (Heavy Duty) (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (Heavy Duty) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (2.9m) (Quick Coupler Line) (For Kal)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***10 | Adapter,(Welded) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (Additional Piping) (For 1-Actuator) (For 1.8m Arm)
| 01***20 | Bolt,(For Mono Lever Steering) | 10 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***50 | Capscrew | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (Additional Piping) (For 1-Actuator) (For 2.9m Arm)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Cylinder Hose And Spacer) (For 2.9m Arm)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Cylinder Hose) (For 1-Actuator) (For 2.9m Arm)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Cylinder Hose) (For 2.4m Arm) (For Turkey)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Link) : Unit_01_of_02
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
| 20***30 | Link | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Link) : Unit_02_of_02
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Link) (For 1.8m And 2.4m Arm)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm (Bucket Link) (For 2.9m Arm)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm Cylinder (100 Hours Greasing Type)
| (7***0) | Cylinder Ass'Y,(Final Coating) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm Cylinder (500 Hours Greasing Type)
| (7***0) | Cylinder Group,(Final Coating) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm Cylinder (For Burst Valve)
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Arm Cylinder (With Arm Crane) (500 Hours Greasing Type)
| (7***0) | Cylinder Ass'Y,(Final Coating) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (5.7m Boom) (Heavy Duty) (100 Hours Greasing Type)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 2 |
| 07***90 | Seal,Dust (Kit) | 2 |
| 20***52 | Bracket (Welded) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (5.7m Boom) (Heavy Duty) (500 Hours Greasing Type)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 2 |
| 07***90 | Seal,Dust (Kit) | 2 |
| 20***52 | Bracket (Welded) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Additional Lines)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***75 | Bolt - Tube Mounting | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Arm And Bucket Cylinder Lines)
| 01***30 | Bolt,(Not Used When Towing Winch) | 26 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Arm And Bucket Cylinder Lines) (With Arm Crane)
| 01***30 | Bolt,(Not Used When Towing Winch) | 9 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Arm Lock Valve Line)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Arm Lock Valve)
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Attachment Plug)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 4 |
| 07***20 | Plug,(For Without Center Guard) | 16 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Lubricating Line And Harness)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 04***12 | Clamp | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Lubricating Line And Working Lamp)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Lubricating Line And Working Lamp) (Seal Less)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Quick Coupler Line) (For Kal)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***09 | Nut,(For Japan) | 24 |
| 01***32 | Washer,(With Auto Emergency Steering) | 36 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Top Pin And Arm Cylinder Bottom Pin) (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom (Top Pin And Arm Cylinder Bottom Pin) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (100 Hours Greasing Type)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,L.H | 1 |
| (7***0) | Cylinder Group,R.H | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (500 Hours Greasing Type)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,R.H. (Final Coating) | 1 |
| (7***0) | Cylinder Group,L.H. (Final Coating) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (500 Hours Greasing Type) (For Shipping)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,L.H. (Final Coating) | 1 |
| (7***0) | Cylinder Group,R.H. (Final Coating) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (For Burst Valve)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 6 |
| 20***51 | Spacer? 2.0mm | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom Cylinder (With Arm Crane)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom Cylinder Head Pin (100 Hours Greasing Type)
| (7***0) | Cylinder Group,(Final Coating) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Boom Cylinder Head Pin (500 Hours Greasing Type)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 6 |
| 20***70 | Spacer? 1.5mm | 5 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (Accumulator Related Parts) (For Krupp)
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (Adapter Parts) (For Krupp)
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (For Atlas And Okada)
| 20***80 | Plug,For Hb1200 | 2 |
| 20***30 | Adapter | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (For Matsuda And Furukawa)
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Breaker Adapter (For Nippon Pneumatic)
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket (Hook)
| 20***50 | Plug | 2 |
| 20***40 | Adapter | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket (O-Ring And Spacer)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket (Spacer)
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 0.5m3? 750mm (Horizontal Pin Type)
| 01***60 | Capscrew | 12 |
| 01***16 | Nut - M20 | 4 |
| 01***19 | Nut - M24 | 12 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 0.5m3? 750mm (Vertical Pin Type)
| 20***90 | Bolt | 1 |
| 20***10 | Collar | 2 |
| 20***10 | Bucket,Slope Finishing | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 0.6m3? 865mm (Vertical Pin Type)
| 01***30 | Nut | 8 |
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 0.8m3? 1150mm (Horizontal Pin Type)
| 20***70 | Hook (Welded) | 1 |
| 20***40 | Plate (Welded) | 1 |
| 20***50 | Bracket (Welded) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 0.8m3? 1150mm (Horizontal Pin Type) (Strengthened)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 0.8m3? 1150mm (Vertical Pin Type)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 0.9m3? 1200mm (Horizontal Pin Type)
| 20***80 | Plug,For Hb1200 | 2 |
| 20***30 | Adapter | 2 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 0.9m3? 1200mm (Vertical Pin Type)
| 20***30 | Spacer? 1.5mm | 2 |
| 20***80 | O-Ring | 2 |
| 20***40 | Spacer? 0.8mm | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 1.0m3? 1330mm (Horizontal Pin Type)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 1.0m3? 1330mm (Vertical Pin Type)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 1.17m3? 1450mm (Horizontal Pin Type)
| 20***72 | Tooth | 6 |
| 20***82 | Pin | 6 |
| 20***91 | Lock | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Bucket? 1.17m3? 1450mm (Vertical Pin Type)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Clamshell Bucket
| 01***16 | Nut - M20 | 4 |
| 09***08 | Pin,(Without Pin Puller) | 3 |
| 17***30 | Point,(For Multi Ripper) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Ditch Cleaning Bucket? 0.8m3? 1800mm
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Finishing Bucket
| 01***16 | Nut - M20 | 4 |
| 09***08 | Pin,(Without Pin Puller) | 3 |
| 17***30 | Point,(For Multi Ripper) | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Parts For Less Arm
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Parts For Less Bucket
| 01***30 | Nut | 8 |
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 3 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Ripper Bucket? 0.61m3? 950mm
| 20***20 | Plate (Welded) | 1 |
| 20***30 | Plate,(L.H.) (Welded) | 1 |
| 20***40 | Plate,(R.H.) (Welded) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Single Shank Ripper
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 20***70 | Tooth | 6 |
| 20***20 | Adapter (Welded) | 6 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Three Shank Ripper
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***80 | Cutter,(L.H.) | 1 |
Komatsu : Pc200-8(S/N 310001-Up) : Work Equipment : Trapezoidal Bucket
| 01***05 | Bolt | 3 |
| 01***10 | Nut,(Without Air Conditioner) | 6 |
| 01***16 | Nut - M20 | 4 |
PC200-8(S/N 310001-UP) serial number reference
The machine serial number (Product Identification Number) plate on the PC200-8 and PC200LC-8 is located on the lower right side of the operator cab structure, visible from ground level; a secondary stamped serial is also found on the main frame between the two front hydraulic arms beneath a Komatsu decal. To read the prefix: for the 310-prefix range range the identifier is purely numeric with no letter prefix, so the leading three digits (310) identify this production batch and undercarriage type (LC variant); for other batches in the eighth-generation family a single leading letter is followed by five digits (for example C60001, B30001, J40001). When supplying a serial number to a Komatsu dealer parts system, always record the complete serial exactly as stamped on the plate — the full serial, not just the prefix, is required for precise parts compatibility verification.
| Prefix | Identifies | Notes |
|---|---|---|
| 310 | PC200LC-8 (S/N 310-prefix series) — Japan (JPN) long-carriage Galeo series, eighth generation | This production batch is confirmed in the official Komatsu parts catalog, cross-referenced on multiple parts database sites which explicitly designate this range as PC200LC-8 (long-carriage undercarriage). The original researcher label of 'base-track (non-LC)' was incorrect and has been corrected to PC200LC-8. The catalog listing includes a JPN market tag consistent with Japan-domestic allocation. Engine: SAA6D107E-1B (Komatsu six-cylinder turbocharged, Tier 3 domestic spec). Exact year-of-manufacture per individual unit requires dealer lookup. |
| C60 | PC200-8 (S/N C60001-UP) — standard undercarriage, eighth generation | Confirmed on major parts database sites as PC200-8 S/N C60001-UP. Engine: SAA6D107E-1B; engine serial range documented in the parts catalog. A component specification break occurs at C62001, at which point a separate parts book applies. Relationship between this production batch and the 310-prefix range numeric range is consistent with Komatsu's use of multiple concurrent serial streams for different markets or plants, but no accessed source explicitly states the plant or regional allocation — confirm with dealer. |
| C62 | PC200-8 (S/N C62001-UP) — mid-series specification break within C60 batch, eighth generation | A distinct parts book starting at C62001 indicates revised specifications from that serial onward within C60 prefix batch. Engine: SAA6D107E-1B. Thailand (THA) market designation — verify with dealer. |
| B30 | PC200-8 / PC200LC-8 (S/N B30001-UP) — later eighth-generation production series, standard and long-carriage undercarriage | Engine: SAA6D107E-1B-W1 (revised engine sub-variant denoted by W1 suffix); engine serial range documented in parts catalog. This serial series falls later in eighth-generation production than 310-prefix numeric range. |
| J40 | PC200-8 (S/N J40001-UP) — eighth generation, market allocation unconfirmed | Engine: SAA6D107E-1 (no B or W1 suffix, earlier or different sub-variant); engine serial range per Komatsu parts catalog. Japan-domestic designation unconfirmed — verify with dealer. |
Frequently asked questions
What engine does the Komatsu PC200-8 use?
It uses the Komatsu SAA6D107E-1, a 6.69 L (408 cu in) six-cylinder turbocharged and aftercooled diesel with a high-pressure common-rail fuel injection system. The engine produces 110 kW (148 hp net) at 2,000 rpm and meets U.S. EPA Tier 3 and EU Stage IIIA emissions standards. It replaced the earlier engine used in the PC200-7, delivering improved fuel economy and lower NOx output.
What is the operating weight of the Komatsu PC200-8?
Operating weight for the standard-gauge PC200-8 ranges from approximately 19,750 to 20,010 kg (43,540–44,115 lb) depending on boom-and-stick configuration and shoe width. The long-undercarriage PC200LC-8 variant is heavier. Both figures assume standard triple-grouser track shoes and a full-fuel, full-fluid operating condition.
What model replaced the Komatsu PC200-8?
The PC200-8 (Tier 3, produced roughly 2005–2012) was succeeded by the PC200-8M0, which retained the same SAA6D107E-1 engine family but introduced further fuel-economy refinements, an upgraded monitor system, and improved hydraulic reliability to bridge toward Tier 4 Interim requirements. The PC200-8M0 in turn led to the PC200-10 generation, which adopted a fully Tier 4 Final compliant engine. This series occupies the last Tier 3 generation — an advantage in markets where DPF-free operation is preferred and where the dense aftermarket for the 6D107-series engine keeps long-term ownership costs manageable.
What PC200-8(S/N 310001-UP) owners discuss
What engine does the Komatsu PC200-8 use, and what are its known quirks in service?
The PC200-8 is powered by the Komatsu SAA6D107E-1, a 6.69-litre turbocharged and aftercooled inline-6 common-rail diesel meeting EPA Tier 3 / EU Stage IIIA emissions, delivering around 110 kW (148 hp) at 2,000 rpm. Community technicians consistently flag the common-rail injection system as the first place to look when the machine loses power or emits black smoke: carbon deposits build up on injector nozzle tips over time — especially if low-quality or contaminated diesel has been used — disrupting the spray pattern and causing rough idle, black smoke, or hard starting. Fuel filters and the water-separator bowl must be serviced on schedule; operators in tropical or dusty environments report that neglecting the primary water separator allows water and biological slime to reach the injectors and high-pressure pump much faster than the service interval would suggest. A failed common-rail relief valve has also been reported after injector cleaning if the root cause of contamination was not addressed first. Forum consensus is that if one injector fails at high hours it is economical to renew the full set rather than replace units one at a time.
Why do PC200-8 hydraulics sometimes become slow or sluggish across all functions, and where should diagnosis start?
Operators and mechanics on heavy-equipment forums agree that across-the-board sluggishness — boom, arm, bucket, and swing all affected simultaneously — almost always points upstream of the main control valve rather than to individual cylinder seals. The first check is pilot circuit pressure: the PC200-8 pilot system should register roughly 22–26 bar in both L-mode and P-mode at full throttle. If pilot pressure is low or zero at the solenoid manifold, the pressure-reducing valve fitted to the side of the main control valve is suspect — a fine internal screen in that valve is known to clog or blow out, collapsing pilot pressure and leaving the joysticks feeling heavy or completely unresponsive. A hairline crack in the pilot valve block has also been reported; the crack opens up as oil warms and lets pressure bleed to tank, so the fault may not appear during a cold-start check. Once pilot pressure is confirmed good, the load-sensing (LS) valve and pressure-compensator (PC) valve on the main pump are the next targets; a sticky LS spool is a common and relatively inexpensive fix. If only travel is slow while upper functions are normal, the swivel joint (rotary manifold) seals are the likely culprit. Always check for metallic glitter in the hydraulic oil before opening the pump.
What hydraulic overheating issues are reported on the PC200-8, and what are the common root causes?
Forum users and independent technicians report hydraulic oil climbing to around 115 °C (240 °F) within 20–30 minutes under working load, particularly in warm climates or when the machine is run continuously in heavy digging cycles. The cooler core is the most commonly cited culprit: fins on the hydraulic oil cooler pack clog with fine dirt, chaff, or mud surprisingly quickly, and a partially blocked core can raise operating temperature by 25 °C (45 °F) or more. A healthy cooler should produce a temperature drop of around 15–18 °C (27–32 °F) between inlet and outlet; a drop of 40 °C (72 °F) or greater indicates the core is severely restricted. The thermal bypass valve inside the cooler circuit has also been identified as a failure point: if the valve spring weakens or the spool sticks open, oil continuously bypasses the cooler and temperature climbs even with a clean core. Community advice is to blow out the cooler core from the clean side with compressed air at every 250-hour service, verify the bypass valve spool moves freely, and confirm main relief pressure is within the manufacturer's specification.
What swing-circle wear symptoms should PC200-8 owners watch for, and when does the bearing need replacement?
The swing bearing on 20-tonne class Komatsu excavators sees heavy cyclic loading and is one of the higher-wear items at elevated hours. Community experience points to several recurring patterns. Early warning signs include a grinding, popping, or clicking sound during rotation — especially noticeable at normal swing speed but absent at very slow speed — combined with a perceptible wobbling or rocking of the upper structure when the arm is extended under load. Metal flakes or a grey metallic sheen in the swing gearbox grease or hydraulic drain is a serious indicator of raceway deterioration. Vertical play (axial clearance) in the bearing is the definitive measurement: a dial indicator placed between the upper frame and the slew ring registers close to 0.9 mm (0.035 in) on a new or healthy bearing; experienced mechanics report that play exceeding roughly 2.5 mm (0.100 in) signals the bearing should be changed without delay. The swing gearbox oil level and the grease bath that lubricates the ring gear teeth should be checked at each regular service interval. Any cracks in the slew ring mounting bolts or fretting of the mounting face are grounds for immediate grounding of the machine. Have your dealer verify bearing clearance with a dial indicator before deciding on replacement, as this is a safety-critical structural component.
What electrical and sensor faults are most frequently reported on the PC200-8 monitor system, and how are they typically resolved?
The PC200-8's monitor panel communicates faults via caution lamps (yellow, attend soon), action lamps (red, stop immediately), and alphanumeric codes. Several sensor and electrical issues recur in forum threads and technical Q&A boards. The sensor power supply circuit can report a high-voltage fault when the ECM detects voltage outside the normal window, often caused by a chafed wiring loom rather than a failed sensor itself; harness routing near the boom pivot and along the cab floor are known wear points. A water-in-fuel sensor fault is one of the more common triggered codes and is sometimes a genuine warning — operators report water entering the tank through a poorly sealed filler cap or condensation in large-capacity tanks that see partial fills. Coolant temperature sensor drift generates a spurious overheat warning. Engine oil pressure sensor faults are flagged when ECM-measured voltage falls outside the acceptable band; the fix is usually a sensor replacement or harness repair. The Komatsu machine monitor stores active and inactive fault codes that can be accessed through the monitor's service menu. Any red action-lamp code should be treated as a stop-work event; have your dealer verify the cause before returning the machine to service.
What undercarriage wear patterns are typical for the PC200-8 and what extends component life?
The PC200-8 sits in the 20-tonne class with a track frame and undercarriage geometry that distributes load across bottom rollers, carrier rollers, idlers, and drive sprockets. Community experience points to several recurring patterns. Bottom rollers directly under the heaviest loading zone — typically the two or three rollers nearest mid-track — wear through their shaft seals first, leaking oil and accelerating internal bushing wear; checking each roller individually for oil weepage at every 250-hour greasing service catches failures early. Track shoe and bushing wear rate is heavily driven by application: machines spending most of their life on abrasive rock or compacted gravel wear out pins and bushings two to three times faster than machines on soft ground. Sprocket segments wear in a characteristic shark-tooth profile as the track pitch elongates; mechanics recommend comparing tooth profile against original dimensions rather than waiting for visible cracking. Drive sprocket hardware should be re-torqued at the first 50-hour check after any sprocket segment change. Correct track tension is the single most-cited maintenance factor for extending overall undercarriage life: too tight loads the bottom rollers and bushings unnecessarily, while too loose causes the chain to slap against the frame and unloaded rollers.
What should a buyer inspect before purchasing a used Komatsu PC200-8?
Community consensus from heavy-equipment forums and used-equipment professionals centres on the following priority checks. First, verify actual operating hours through KOMTRAX: the PC200-8 was built with Komatsu's KOMTRAX telematics system as standard equipment, and an authorized Komatsu dealer can pull an Equipment Management System report showing historical hours, idle time ratio, and geographic work history. Real-world cases exist where a machine listed at around 6,500 hours had over 11,000 hours recorded in the KOMTRAX log — a clear sign the hour meter had been tampered with. The ECM stores a separate engine-hours record that also requires a dealer scan tool to retrieve. Second, conduct a warm hydraulic function test: with the engine fully up to temperature, cycle all functions — boom, arm, bucket, swing, and both travel motors — and time each movement against published specification. Third, physically inspect the undercarriage: check each bottom roller for oil weeping, assess sprocket tooth profile, and assess track shoe wear and chain sag. Fourth, examine the swing circuit for upper-structure wobble and check for metal particles in the swing gearbox oil. Fifth, pull the pilot filter and hydraulic return filter for inspection: metallic debris or milky (water-contaminated) oil indicates expensive internal damage. Sixth, cold-start the engine and watch for blue or white smoke, then listen at idle for injector tick. Finally, check the monitor for stored fault codes via the service menu. Have your dealer verify hydraulic pressures (main relief, pilot circuit, pump output) with gauges before finalizing any purchase, as this is a safety-critical step.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Komatsu PC200-8(S/N 310001-UP). Related factory variants of the same model family:
PC200-8(S/N 300001-UP (ecot3; Overseas Version))
Need a specific PC200-8(S/N 310001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.