Komatsuhydraulic excavatormedium (pc100 - pc270)
Komatsu PC200-8(S/N 300001-UP (ecot3; Overseas Version))
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu PC200-8 (S/N 300001-UP, ecot3, Overseas Version) is a 20-tonne class crawler hydraulic excavator produced from approximately 2005 to 2012 under Komatsu's Galeo product branding for international markets. It is powered by the Komatsu SAA6D107E-1, a 6-cylinder, 6.69 L turbocharged and aftercooled diesel engine rated at 110 kW (148 hp) net / 116 kW (155 hp) gross at 2,000 rpm, equipped with a high-pressure common-rail (HPCR) fuel injection system meeting Tier 3 / Stage IIIA emission standards under Komatsu's ecot3 programme. Operating weight ranges from 19,900 to 20,010 kg (43,870 to 44,115 lb) depending on configuration. The S/N 300001-UP designation identifies the overseas ecot3 export-standard build series, offered in standard, long-reach, and mass-excavation configurations with arm lengths of approximately 2.4 m (7 ft 11 in) and 2.9 m (9 ft 7 in). Its direct predecessor in the same class was the PC200-7, which used the earlier SAA6D102E-2 engine, and its successor is the PC200-8M0, which refined the same SAA6D107E-1 platform for improved fuel economy.
The shift from the PC200-7 to the PC200-8 centred on Komatsu's introduction of HPCR electronic fuel injection, which reduced NOx emissions by approximately 29 percent versus the SAA6D102E-2, tightened the integration between the engine controller and the CLSS (Closed-centre Load-Sensing System) hydraulic circuit, and upgraded the operator cab with improved noise isolation and a more sophisticated monitoring system. The PC200-8 also introduced KOMTRAX telematics as standard on many market variants, giving fleet operators remote access to fuel consumption, fault codes, and hour data — a feature that proved particularly valuable for machines exported to developing markets where the overseas ecot3 specification was targeted. In the current used-equipment and parts market, the S/N 300001-UP ecot3 series commands strong demand because it was produced in large volumes globally, the SAA6D107E-1 engine is widely supported by both Komatsu dealers and the aftermarket, and the machine's 20-tonne working class remains the most common size tier in civil construction and infrastructure work worldwide. Parts interchangeability between the PC200-8, PC200LC-8, and portions of the PC220-8 family broadens supply-chain options for operators, making this generation one of the most accessible Komatsu excavators to maintain outside established dealer networks.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu PC200-8(S/N 300001-UP (ecot3; Overseas Version)) specifications
Engine
| Model | Komatsu SAA6D107E-1 |
| Configuration | 6-cylinder, water-cooled, 4-stroke, direct injection, turbocharged and aftercooled |
| Displacement | 6.69 L (408 cu in); bore × stroke 107 mm × 124 mm |
| Gross power | 116 kW (155 hp) at 2,000 rpm |
| Net power | 110 kW (148 hp) at 2,000 rpm |
| Emissions tier | EPA Tier 3 / EU Stage IIIA (Komatsu ecot3) |
Weights
| Operating weight — standard 600 mm shoe | 19,900–20,010 kg (43,870–44,115 lb); varies slightly by configuration and source |
| Ground pressure — 600 mm shoe | approximately 44.1 kPa (0.45 kg/cm²); varies by configuration |
| Ground pressure — wider shoe options | 37.65–46.19 kPa (0.38–0.47 kg/cm²) for 700–800 mm shoe variants |
Dimensions
| Transport length — standard-arm configuration | 9,480–9,495 mm (31 ft 1 in – 31 ft 2 in) |
| Transport width (outside tracks) | 2,800–3,000 mm (9 ft 2 in – 9 ft 10 in) |
| Transport height (cab top) | 3,040 mm (10 ft 0 in) |
| Tail swing radius | 2,940 mm (9 ft 8 in) |
| Track gauge (centre to centre) | 2,200 mm (7 ft 3 in) |
| Track length on ground | 3,275 mm (10 ft 9 in) |
| Standard shoe width | 600 mm (23.6 in) triple grouser |
| Ground clearance | 440 mm (1 ft 5 in) |
Performance
| Max dig depth — standard arm (approx. 2,925 mm) | 6,095 mm (20 ft 0 in) |
| Max dig depth — long arm option | 6,620 mm (21 ft 9 in) |
| Max reach at ground level — standard arm | 9,190 mm (30 ft 2 in) |
| Max reach at ground level — long arm | 9,700 mm (31 ft 10 in) |
| Max dump height — standard arm | 6,890 mm (22 ft 7 in) |
| Max dump height — long arm | 7,110 mm (23 ft 4 in) |
| Max cutting height — standard arm | 9,800 mm (32 ft 2 in) |
| Max cutting height — long arm | 10,000 mm (32 ft 10 in) |
| Max vertical wall dig depth — standard arm | 5,430 mm (17 ft 10 in) |
| Max vertical wall dig depth — long arm | 5,980 mm (19 ft 7 in) |
| Swing speed | 12.4 rpm |
| Travel speed (low / mid / high) | 3.0 / 4.1 / 5.5 km/h (1.9 / 2.5 / 3.4 mph) |
| Gradeability | 70% (35°) |
| Drawbar pull (max) | 178 kN (18,200 kgf / 40,120 lbf) |
Forces
| Bucket digging force (ISO, standard arm) | 149 kN (15,200 kgf / 33,500 lbf) |
| Arm/stick digging force (ISO, standard arm ~2,925 mm) | 108 kN (11,000 kgf / 24,250 lbf) |
| Note on force values | Values reflect standard 2,925 mm arm; longer arm option reduces arm crowd force |
Service capacities (summary)
| Fuel tank | 400 L (105.7 US gal) |
| Hydraulic oil tank | 135 L (35.7 US gal) |
| Engine oil (with filter) | 23.1 L (6.1 US gal) |
| Cooling system | 20.4 L (5.4 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PC200-8(S/N 300001-UP (ecot3; Overseas Version)) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (SAA6D107E-1, with filter change) | 25.4 L (6.7 US gal) total; refill after drain+filter: 23.1 L (6.1 US gal) | Komatsu Genuine Engine Oil EO15W-40-DH (preferred; JASO DH-1/API CI-4, SAE 15W-40) for ambient -15 °C to +50 °C. Komatsu EO10W-30-DH (SAE 10W-30) for ambient -30 °C to +40 °C. Both must meet API CI-4 or higher. |
| Cooling system (radiator + engine block) | 20.4 L (5.4 US gal) | Komatsu KCCL (Komatsu Super Coolant / AF-NAC) — ethylene-glycol-based OAT long-life coolant. Premixed 50% coolant / 50% distilled water; do not dilute below 30% or above 68% antifreeze concentration. Change interval: 2 years or 4,000 h. |
| Fuel tank | 400 L (105.7 US gal) | Diesel fuel meeting ASTM D975 No. 2-D (above -10 °C) or No. 1-D / arctic blend (below -10 °C). Sulfur content ≤ 500 ppm (ultra-low-sulfur preferred). |
| Hydraulic tank (refill capacity) | 135 L (35.7 US gal) | Komatsu Genuine Hydraulic Oil HO46-HM (ISO VG 46 anti-wear, zinc-free, HM type) for ambient -20 °C to +45 °C. For extreme cold (below -20 °C) use HO32-HM (ISO VG 32). Change interval: 5,000 h (filter: 1,000 h). |
| Hydraulic system total (tank + cylinders + lines + motors) | approximately 232 L (61.3 US gal) system total; OMM refill/maintenance figure is 135 L (tank only). Pilot circuit oil is shared with the main hydraulic circuit and is not a separate refill item. | Same as hydraulic tank: Komatsu HO46-HM (or HO32-HM in arctic conditions). |
| Final drive / travel reduction case (each side) | 3.3 L (0.9 US gal) per side | Komatsu Genuine Powertrain Oil TO30 (SAE 30, standard) or TO10 (SAE 10W for cold climates below -10 °C). Both meet KES 07.868 specification. Change interval: first 250 h, then every 1,000 h. |
| Swing machinery / swing reduction case | 6.6 L (1.7 US gal) — OMM refill figure; one third-party source lists 7.1 L | Komatsu Genuine Powertrain Oil TO30 (SAE 30, standard ambient) or TO10 (SAE 10W, cold climate below -10 °C). KES 07.868. Change interval: first 250 h, then every 1,000 h. |
| Damper case (engine vibration damper) | 0.65 L (0.17 US gal) | Komatsu Genuine Powertrain Oil TO30 or TO10 per OMM. Same KES 07.868 specification as final drive and swing. |
| Grease (pins, bushings, swing circle, track, work equipment) | As required (no fixed volume stated in OMM for routine relubrication) | Komatsu Genuine Grease G2-LI (lithium EP grease, NLGI No. 2; meets KES 07.881) for standard ambient conditions. Komatsu G2-CA (calcium-based EP grease, NLGI No. 2) for extremely dusty or wet environments. Swing circle gear and open-gear surfaces: Komatsu Hyper Grease G2-T or G2-TE (moly-fortified, tacky). Relubrication interval: every 8–10 h for work equipment pins (first 50 h), every 250 h thereafter. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu PC200-8(S/N 300001-UP (ecot3; Overseas Version)) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the PC200-8(S/N 300001-UP (ecot3; Overseas Version)) beyond the schedule
Predictive Maintenance & Fluid Analysis for the PC200-8 ecot3
The SAA6D107E-1's HPCR common-rail system is highly sensitive to fuel and oil contamination; schedule oil sampling from the engine crankcase at every 500 h change and from the swing reduction unit at every 1,000 h drain to establish wear-metal baselines. Monitor the Komatsu electronic monitor panel for active fault codes relating to rail pressure deviation or pump delivery shortfall — early code capture prevents injector and high-pressure pump damage. Hydraulic oil samples drawn from the return line at 1,000 h intervals provide advance warning of cylinder or pump wear before catastrophic failure. Track coolant inhibitor concentration at 2,000 h or annually.
Corrective & Common Repairs on the PC200-8 ecot3
The SAA6D107E-1's electronically controlled common-rail injectors are the most frequent corrective item on high-hour machines: symptoms include rough idle, black smoke, and fuel rail pressure faults on the monitor. The CLSS hydraulic main pump spools and servo pistons wear progressively, showing as slow cycle times before full failure — pressure-test the circuit before condemning the pump. Swing reduction unit seal leaks are common after high hours and allow gear oil loss that accelerates ring-gear and planetary wear. Track roller seal failures and final-drive oil leaks are the dominant undercarriage corrective items on this platform.
Overhaul & Rebuild Points for the PC200-8 ecot3
Plan a top-end engine inspection on the SAA6D107E-1 at or before 10,000 h, focusing on the 4-valve-per-cylinder head: valve seat recession, injector sleeve condition, and head-gasket fire-ring integrity are the primary wear items at this stage. The dual-circuit variable-displacement main hydraulic pump warrants a full bench reconditioning — port plate, piston shoes, and barrel — when pump flow tests show more than a 10 percent shortfall from new specification. Swing bearing replacement is typically warranted between 8,000 and 12,000 h depending on swing-cycle intensity; verify by measuring bearing play against the Komatsu service limit before committing.
Seasonal & Environmental Servicing for the PC200-8 ecot3
In tropical or high-humidity overseas operating environments — the target market for this ecot3 S/N 300001-UP series — check all electronic connector seals at the engine ECU, pump controller, and KOMTRAX antenna harness every 250 h to prevent corrosion-induced fault codes. Radiator and oil-cooler cores accumulate organic debris rapidly in tropical conditions; blow-clean fins every 50 h and chemically flush the cooling circuit at each 4,000 h coolant change. In cold climates, pre-heat the SAA6D107E-1 before loading to protect the HPCR fuel pump, and change to Komatsu EO 0W-30 or 5W-40 below -15 °C (5 °F). In sandy or dusty sites, halve the air cleaner service interval and inspect the dust indicator before each shift.
PC200-8(S/N 300001-UP (ecot3; Overseas Version)) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 207-60-71181 | Element,Air Cleaner | Air intake service | Check fitment → |
| 09637-30163 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 09637-90263 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
| 09637-30263 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
| 17M-911-3530 | Element,Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PC200-8(S/N 300001-UP (ecot3; Overseas Version)) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CA559 | Common rail fuel pressure too low — the engine ECU detected rail pressure below the minimum threshold during operation. | Worn or leaking fuel injector (excessive internal return flow), failing high-pressure supply pump, clogged fuel pre-filter or suction strainer, faulty pressure-limiter valve, or air ingestion in the low-pressure fuel circuit. | Check and drain the pre-filter/water separator first; measure injector return flow on each cylinder at low idle to identify a leaking injector before condemning the pump or pressure limiter. |
| CA271 / CA272 | Inlet Metering Valve (IMV) / Pressure Control Valve 1 short circuit (CA271) or open circuit (CA272) — ECU cannot control high-pressure pump fuel metering. | Failed IMV solenoid coil, chafed or corroded wiring harness at the valve connector, contaminated fuel causing valve sticking, or loose connector at the high-pressure pump. | Inspect the IMV connector and harness for damage or corrosion; measure solenoid coil resistance (compare to workshop-manual specification); if wiring is intact, replace the IMV/PCV1 solenoid valve — noted as one of the most common PC200-8 component failures. |
| CA115 | Engine Ne (crankshaft) speed sensor AND backup speed sensor both returning abnormal signals simultaneously — engine stops and will not restart. | Defective Ne speed sensor or its wiring/connector; defective backup (Bkup) speed sensor or connector; damaged or misaligned rotation sensor ring/wheel on crankshaft or camshaft side; in rare cases a defective engine ECU. | Inspect both speed sensor connectors for corrosion or loose fit; check sensor air gap and ring-gear teeth for damage; verify correct installation of rotation sensor wheel; measure sensor output with a multimeter; replace the failed sensor — engine will not start until this code is cleared. |
| CA451 / CA452 | Common rail pressure sensor signal voltage out of range — CA451 is sensor-voltage too high; CA452 is sensor-voltage too low. Displayed alongside user code E11 on the machine monitor. | Defective common rail pressure sensor (internal failure or contaminated connector); open or shorted signal wire between sensor and ECU; if swapping sensor causes code to flip between CA451 and CA452, the sensor is confirmed defective. | Check sensor connector for moisture and corrosion; use service monitor to read live rail pressure and compare with a mechanical gauge; if fault code switches from CA452 to CA451 after wiggling the harness or replacing the sensor, replace the sensor — do not replace the ECU first. |
| CA428 | Water-in-fuel sensor signal voltage too high — displayed on monitor as user code E15 alongside CA428; indicates water contamination detected in the fuel pre-filter bowl or sensor circuit fault. | Water accumulation in the fuel pre-filter/water separator bowl triggering the sensor; failed or shorted water-in-fuel sensor; damaged sensor wiring. | Drain the fuel pre-filter water separator bowl immediately; if code persists after draining and engine restart, test sensor circuit voltage and replace the water-in-fuel separator sensor if wiring is intact. |
| DXA8KA | PC-EPC (Front pump) solenoid open circuit — pump controller detected no current in the proportional solenoid circuit controlling main pump displacement; machine may lose power or engine may stall under heavy load. | Open-circuit failure in the PC-EPC solenoid coil; chafed or broken wire in the harness between pump controller and solenoid; corroded solenoid connector. | Use the service monitor's pump-controller monitoring function to check PC-EPC drive current live; measure solenoid coil resistance; inspect harness continuity from pump controller to solenoid valve; replace solenoid coil or repair harness as indicated — if all check out, suspect the pump controller. |
| 989M00 | Engine controller (ECU) lock caution 2 — machine monitor cannot authenticate with the engine ECU; engine will not start. | Machine monitor was replaced or swapped from another machine without updating the user password; mismatched security pairing between monitor and ECU; defective machine monitor. | If the monitor was recently replaced or swapped, enter or reset the user password via the monitor's security menu to match the ECU's stored credentials; if no monitor swap occurred, suspect a defective machine monitor and test with a known-good unit before replacing the ECU. |
| CA322 / CA323 / CA324 / CA325 | Injector drive circuit fault for individual cylinders: CA322 = injector #1 open/short; CA323 = injector #5 open/short; CA324 = injector #3 open/short; CA325 = injector #6 open/short (SAA6D107E-1 is a 6-cylinder engine; CA331 covers injector #2 and CA332 covers injector #4). | Failed injector solenoid coil (open or shorted); damaged injector wiring harness or connector at the valve cover; contaminated or water-damaged connector pins; in rare cases ECU driver circuit failure. | Identify the affected cylinder from the code number; measure injector solenoid resistance at the valve-cover connector; inspect harness for abrasion at common chafe points near the engine lifting eye; replace the faulty injector or repair harness — running on a misfiring cylinder causes rough idle, black smoke, and can lead to CA559 (low rail pressure). |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PC200-8(S/N 300001-UP (ecot3; Overseas Version)) attachments & work tools
Buckets — General Duty (GD), Heavy Duty (HD), Rock
The PC200-8 (S/N 300001-UP) accepts buckets in the range of approximately 0.50 m³ to 1.20 m³ (0.65 yd³ to 1.57 yd³), with the reference/standard bucket at approximately 0.80–1.10 m³ (1.05–1.44 yd³) depending on arm configuration. Typical bucket widths for this 20-tonne class run from roughly 600 mm (24 in) for narrow-trench work up to approximately 1,220 mm (48 in) for general earthmoving; heavy-duty and rock-type buckets are offered in the same pin-on interface at reduced capacities to stay within OEM payload limits. Both pin-on (direct-mount) and coupler-ready buckets are used on this class, with pin-on remaining the OEM standard.
Bucket Pin Interface
The PC200-8 uses an 80 mm (3.15 in) bucket/link pin diameter. The width between bucket ears is approximately 326 mm (12.8 in) and the standard pin length is approximately 530 mm (20.9 in); pin-center-to-pin-center spacing on the stick nose is approximately 457 mm (18 in), though this varies by configuration — cross-verify with your specific stick assembly before ordering replacement pins.
Hydraulic Hammers / Breakers
The PC200-8 is a 20-tonne machine suited to medium-class hydraulic breakers in the approximately 700–1,000 kg (1,540–2,200 lb) range. The PC200-8 auxiliary circuit supports breaker mode flow at approximately 120–180 L/min (32–48 US gal/min) and an operating pressure of approximately 160–180 bar (2,320–2,610 psi), matching the standard requirements of this breaker weight class — verify the exact flow setting in the operator's menu before first use.
Quick Couplers
Both mechanical and hydraulic quick couplers are available for the PC200-8 in the 20-tonne class, designed to match the 80 mm pin diameter and approximately 326 mm ear-width interface. Hydraulic couplers for this class operate at 40–380 bar working pressure and require a low pilot flow of approximately 10–20 L/min from the machine's existing pilot circuit. Mechanical wedge-type couplers are also widely used and require no additional hydraulic circuits.
Thumbs and Grapples
Pin-on hydraulic thumbs sized for the PC200 class are available from OEM and multiple aftermarket suppliers, mounting to the stick via the existing 80 mm pin bores or via dedicated weld-on brackets. Clamshell grapple buckets for the PC200 class are offered at approximately 600–1,070 mm (24–42 in) width using the same 80 mm pin interface. Both thumb and grapple attachments require the machine's double-action auxiliary circuit; the operator's attachment mode selector must be set to double-action mode.
Rippers
Single-shank rippers are a recognised attachment for the PC200-8 class, used for hard soil ripping, light rock fracturing, and asphalt/pavement removal; the ripper mounts pin-on to the stick nose using the standard 80 mm pin interface. Rippers on this size class are passive (no auxiliary hydraulic circuit required) and their use is subject to OEM lift-capacity limits, which should be confirmed against the PC200-8 (S/N 300001-UP) lift chart in the operator's manual for the specific boom-and-stick configuration fitted.
Hydraulic Tool Circuit Notes
The PC200-8 (S/N 300001-UP, ecot3) main implement relief is set at 34.3 MPa (4,970 psi) and total combined pump flow reaches up to 439 L/min (116 US gal/min). For double-action tools (thumbs, grapples, compactors), the machine's attachment mode must be selected and flow rate chosen; for single-action tools such as breakers, a dedicated breaker mode with two selectable flow levels is used. Tools requiring sustained flow above approximately 180 L/min (48 US gal/min) or pressure above the implement relief setting are outside the verified capacity of this machine.
All PC200-8(S/N 300001-UP (ecot3; Overseas Version)) assemblies by section
Every catalogued assembly group for the Komatsu PC200-8(S/N 300001-UP (ecot3; Overseas Version)). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Accessory
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Accessory : Cap And Overall
| 09***50 | Overall,(Special Order) | 1 |
| 09***50 | Cap And Overall Kit | 1 |
| 09***57 | Cap,(For Japan) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Accessory : Spare Parts
| 07***60 | O-Ring,(F4350-55a0 -10 ) | 1 |
| 07***95 | O-Ring (Kit) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Accessory : Spare Parts (Sandy And Dusty Spec.)
| 07***60 | O-Ring,(F4350-55a0 -10 ) | 1 |
| 07***95 | O-Ring (Kit) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Accessory : Tool(#300001-300673)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***17 | Nozzle | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Accessory : Tool(#300674-)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***17 | Nozzle | 1 |
Cooling System
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Cooling System : Cooling System (Fan Guard And After Cooler Piping)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(With Body Positioner) | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Cooling System : Cooling System (Fan Guard And After Cooler Piping) (Sandy And Dusty Spec.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(With Body Positioner) | 5 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Cooling System : Cooling System (Fuel Cooler And Blind Parts)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Cooling System : Cooling System (Fuel Cooler And Condenser) (With Air Conditioner)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Cooling System : Cooling System (Oil Cooler)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***05 | Capscrew | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Cooling System : Cooling System (Radiator)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Cooling System : Cooling System (Shroud And After Cooler)
| 01***20 | Bolt,(For Mono Lever Steering) | 24 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 20 |
Electrical System
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Additional Rear Work Lamp
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 08***14 | Band,(D60p) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Additional Work Lamp (Demolition Spec.)
| 01***20 | Bolt | 2 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 2 |
| 04***12 | Clamp | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Additional Work Lamp (With Front Guard)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 04***12 | Clamp | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Additional Work Lamp(#300001-307373)
| 01***20 | Bolt,Sems | 2 |
| 01***60 | Bolt | 2 |
| 01***32 | Plain Washer | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Additional Work Lamp(#307374-)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Large Capacity) (Wet)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Wet)
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Beacon Lamp
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Electric Wiring (Battery Case Side)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Electric Wiring (Connnector Bracket)(#300062-305111)
| 08***36 | Tie, Cable | 3 |
| 20***60 | Bracket | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Electric Wiring (Engine Side)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 9 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Electric Wiring (Engine Side) (With Pre Cleaner)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 9 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Electric Wiring (Main Harness) (1/2)
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 15 |
| 01***10 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Electric Wiring (Main Harness) (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***85 | Bolt,(Used With Pin Puller) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 13 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Electric Wiring (Starting Harness)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***30 | Bolt - M8 X 30lg | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Horn
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Rear View Monitoring System (1 Camera)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Rear View Monitoring System (2 Camera)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Electrical System : Travel Alarm
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 5 |
| 01***35 | Bolt,(For Fix Position) | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
Engine Related Parts
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Engine Related Parts : Air Cleaner Connecting Parts
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***05 | Clamp | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Engine Related Parts : Air Cleaner Connecting Parts (With Pre-Cleaner)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***05 | Clamp | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Engine Related Parts : Corrosion Resistor
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Engine Related Parts : Corrosion Resistor (With Air Conditioner)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Engine Related Parts : Dumper
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 10 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Engine Related Parts : Engine Mounts
| 01***55 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Engine Related Parts : Filter Remote Piping And Main Pump
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***75 | Bolt - Tube Mounting | 1 |
Fuel Tank And Related Parts
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Line (Drain Piping)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Line (Drain Piping) (For Fuel Refill Pump)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Line (Fuel Supply Piping)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***75 | Bolt - Tube Mounting | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (For Fuel Refill Pump)(#300001-300423)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (For Fuel Refill Pump)(#300424-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***75 | Bolt - Tube Mounting | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank(#300001-300423)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank(#300424-)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Guard
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Battery Case (With Fuel Refill Pump)
| 01***30 | Bolt,(Not Used When Towing Winch) | 46 |
| 01***12 | Screw | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 39 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Battery Case(#300001-300423)
| 01***30 | Bolt,(Not Used When Towing Winch) | 46 |
| 01***12 | Screw | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 39 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Battery Case(#300424-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 46 |
| 01***12 | Screw | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 39 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Counter Weight (3730kg) (With Rear View Camera)(#300001-300423)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Counter Weight (3730kg) (With Rear View Camera)(#300424-)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Counter Weight (3730kg)(#300001-300423)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Counter Weight (3730kg)(#300424-)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Counter Weight Mounting
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Handrail
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Hood
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
| 01***16 | Washer,(For 35a Alternator) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Hood (Net)
| 01***30 | Bolt,R.H | 2 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 22 |
| 01***32 | Plain Washer | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover (Cover) (With Pre Cleaner)(#300001-300423)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 20***10 | Mirror | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover (Cover) (With Pre Cleaner)(#300424-305390)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***08 | Screw | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover (Cover) (With Pre Cleaner)(#305391-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***08 | Screw | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover (For 2-Actuator)(#300001-300423)
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 20***91 | Hand Rail | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover (For 2-Actuator)(#300424-305390)
| 01***30 | Screw | 2 |
| 20***30 | Clamp | 1 |
| 20***60 | Support | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover (For 2-Actuator)(#305391-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***30 | Screw | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover (Pre Cleaner) (With Pre Cleaner)
| 20***20 | Plate | 4 |
| 20***10 | Plate? 1.6mm,1.6mm | 2 |
| 20***30 | Bolt | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover(#300001-300423)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 25 |
| 01***16 | Screw | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover(#300424-305390)
| 20***30 | Sheet | 1 |
| 42***40 | Clamp | 1 |
| 42***60 | Bolt | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Cover(#305391-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Frame
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***60 | Sheet | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Frame (For Additonal Filter)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 19 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Machine Cab Frame (With Pre-Cleaner)
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
| 20***60 | Sheet | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Partition (Left Side)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Partition (Left Side) (With Air Conditioner)(#300001-300005)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Partition (Left Side) (With Air Conditioner)(#300006-)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Partition (Left Side) (With Corrosion Resistor)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Partition (Left Side) (With Corrosion Resistor) (With Air Conditioner)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Partition (Middle)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 21 |
| 01***16 | Screw | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Partition (Valve And Muffler Side)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 21 |
| 01***16 | Screw | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Rear View Mirror (For Counter Weight)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Rear View Mirror? L.H.
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Rear View Mirror? R.H.
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Side Cover? L.H. : Unit_02_of_02
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Side Cover? L.H. : Unit_01_of_02
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Side Cover? R.H.
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Under Cover
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Under Cover (For Fuel Refill Pump)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Guard : Under Cover (With Water Separator)
Hydraulic System
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Arm And Bucket Line
| 01***40 | Bolt (Op) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Arm And Bucket Line (With Arm Holding Valve)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***40 | Bolt (Op) | 2 |
| 01***75 | Bolt (M10-1.50x75) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Arm Drift Priventive
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Attachiment Line (Main Line? L.H.) (For 1-Actuator)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 04***12 | Clip,See Fig. K4010-41a1 | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Attachiment Line (Main Line? R.H.) (For 1-Actuator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Attachiment Line (Return And Pilot Filter) (For 1-Actuator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Attachment Lines (For 2-Actuator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Boom Line
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***85 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Burst Valve (Boom Burst Valve)
| 01***09 | Nut,(For Japan) | 4 |
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Burst Valve (Boom Burst Valve) (For Magnet)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Burst Valve (Burst Valve Line)
| 02***15 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 6 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Burst Valve (Burst Valve Line) (With Over Load Alarm)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Burst Valve (Chassis Side)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
| 01***35 | Bolt,(With Rops) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Burst Valve (Chassis Side) (With Arm Lock Valve)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Delivery Line
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Delivery Line (For Fuel Refill Pump)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Delivery Line (With Inline Filter)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Drain Lines
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 5 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Oil Tank (For 1-Actuator) (With Arm Crane And Burst Valve)
| 02***11 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 13 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Oil Tank (With 1-Additional Actuator Circuit)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydrulic Oil Tank
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***16 | Bolt | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Ls Lines : Unit_01_of_02
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Ls Lines : Unit_02_of_02
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Ls Lines (For 1-Actuator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Main Control Valve (Connecting Parts) (1/2)
| 02***11 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 13 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Main Control Valve (Connecting Parts) (2/2)
| 02***08 | O-Ring (Kit) | 10 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Main Control Valve (For 1-Actuator) (Connecting Parts) (1/2)
| 02***08 | O-Ring (Kit) | 7 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 1 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Main Control Valve (For 1-Actuator) (Connecting Parts) (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***35 | Bolt,(With Rops) | 1 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Main Control Valve (Valve Bracket And Sensor)(#300001-300061)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***35 | Bolt,(With Rops) | 1 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Main Control Valve (Valve Bracket And Sensor)(#300062-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Main Pump
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Main Pump (For 1-Actuator)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | O-Ring,(Y1620-11a0a-11) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Oil Cooler Lines
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 02***08 | Hose | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Ppc Main Line
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Pressure Switch Block
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Return Line
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Return Line (For 1-Actuator)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 5 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve Piping)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve Piping) (Blade Spec.)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve Piping) (For 1-Actuator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Solenoid Valve Circuit (Solenoid Valve) (For 1 And 2-Actuator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Suction Line(#300001-307331)
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***25 | Capscrew | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Suction Line(#307332-)
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***40 | Bolt | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Swing Lines
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Hydraulic System : Travel Lines
Main/Revolving Frame And Related Parts
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Main/Revolving Frame And Related Parts : Boom Foot Pin (100 Hours Greasing Type)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Main/Revolving Frame And Related Parts : Boom Foot Pin (500 Hours Greasing Type)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Main/Revolving Frame And Related Parts : Revolving Frame (For Fuel Refill Pump)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Main/Revolving Frame And Related Parts : Revolving Frame (For Fuel Refill Pump) (With Deck Guard)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Main/Revolving Frame And Related Parts : Revolving Frame (With Deck Guard)(#300001-300160)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 20***81 | Cover | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Main/Revolving Frame And Related Parts : Revolving Frame (With Deck Guard)(#300161-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 20***81 | Cover | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Main/Revolving Frame And Related Parts : Revolving Frame(#300001-300160)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 20***81 | Cover | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Main/Revolving Frame And Related Parts : Revolving Frame(#300161-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 20***81 | Cover | 1 |
Marks And Plates
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (1-Accumulator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (1-Accumulator) (English)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (1-Accumulator) (Spanish)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (2-Accumulator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (2-Accumulator) (English)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (2-Accumulator) (Spanish)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Arm)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***70 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Battery) (English And Turkish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***20 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Battery) (English)(#300001-307375)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Battery) (English)(#307376-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***90 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Battery) (Spanish)(#300001-307375)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Battery) (Spanish)(#307376-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate? Warning | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Arabic)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Chinese)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (English)
| 09***50 | Plate? Mark | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (English) (Lettering Type)
| 09***50 | Plate? Mark | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (French)
| 20***90 | Plate | 2 |
| 22***80 | Plate? Instruction,Battery? Distributor Plate | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Indonesian)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Persian)
| 09***20 | Case? Plate | 1 |
| 09***31 | Plate | 1 |
| 20***20 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Russian)
| 09***81 | Plate? Caution,Keep A Safe Distance | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Spanish) (Lettering Type)
| 09***82 | Plate? Safety,Explosion Or Burning | 2 |
| 22***80 | Plate? Instruction,Battery? Distributor Plate | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Cab Windshield Lock Operation) (Turkish)
| 09***50 | Plate? Mark | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Front Guard) (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***90 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Front Guard) (Chinese)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***40 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Front Guard) (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***00 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Front Guard) (French)
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Front Guard) (Indonesian)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Front Guard) (Persian)
| 41***70 | Plate? Safety,(Torkey) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Front Guard) (Russian)
| 09***63 | Plate? Instruction,(For Arabic) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Front Guard) (Spanish)
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top And Front Guard) (Arabic)
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top And Front Guard) (Chinese)
| 09***63 | Plate? Instruction,(For Indonesia) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top And Front Guard) (English)
| 09***63 | Plate? Instruction,(For Persian) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top And Front Guard) (French)
| 09***7B | Plate? Safety,Acc. (Except The Americas) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top And Front Guard) (Indonesian)
| 09***63 | Plate? Instruction,Air Cleaner | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top And Front Guard) (Persian)
| 09***00 | Plate? Safety,(English) (Lettering Type) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top And Front Guard) (Russian)
| 09***00 | Plate? Safety,(English) (Lettering Type) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top And Front Guard) (Spanish)
| 09***7B | Plate? Safety,Acc. (Except The Americas) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top Guard) (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***90 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top Guard) (Chinese)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top Guard) (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top Guard) (French)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***20 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top Guard) (Indonesian)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top Guard) (Persian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***50 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top Guard) (Russian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***70 | Plate | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Caution Plate (Top Guard) (Spanish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***40 | Plate? Warning | 2 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Komatsu Logo (Boom And Counter Weight)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Komatsu Logo (Boom And Counter Weight) (North America Standard)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***20 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Komatsu Logo (Counter Weight)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***40 | Plate? Warning | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Lifting Capacity Chart
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***70 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Lifting Capacity Chart (English) (Lettering Type)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***50 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Lifting Capacity Chart (Spanish) (Lettering Type)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate | 1 |
| (****0) | Plate? Warning,Top Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Lubrication Chart (English) (100 Hours Greasing Type)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***30 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Lubrication Chart (English) (500 Hours Greasing Type)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***80 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Arabic)(#300001-305349)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Arabic)(#305350-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Chinese)(#300001-305349)
| 09***00 | Plate? Safety,Window Automatic Lock | 1 |
| 20***90 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Chinese)(#305350-)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (English) (Lettering Type)(#300001-305349)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***00 | Plate? Safety,Keep Out Of Turning Area | 1 |
| 09***01 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (English) (Lettering Type)(#305350-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (English)(#300001-305349)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (English)(#305350-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***00 | Plate? Safety,Keep Out Of Turning Area | 1 |
| 09***01 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (French)(#300001-305349)
| 09***00 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (French)(#305350-)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Indnesian)(#300001-305349)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Indnesian)(#305350-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***81 | Plate? Safety,Keep Off Swing Area | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Persian)(#300001-305349)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***20 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Persian)(#305350-)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***60 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Russian)(#300001-305349)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***20 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Russian)(#305350-)
| 09***81 | Plate? Safety,Lock When Open Window Warning | 1 |
| 20***50 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Spanish) (Lettering Type)(#300001-305349)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Spanish) (Lettering Type)(#305350-)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Turkish)(#300001-305349)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Mark And Name Plates (Turkish)(#305350-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***01 | Mark Plate | 1 |
| 09***01 | Plate? Safety,(For South And North America) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Plate (12v Power Source) (English)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Plate (Multi Pattern) (Iso/Backhoe)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***50 | Plate | 1 |
| (****0) | Plate? Warning,Front Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Plate (Swing Or Backing Up Warning)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Plate (Swing Or Backing Up Warning) (English)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Service Instruction (Air Cleaner) (Arabic)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Service Instruction (Air Cleaner) (Chinese)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Service Instruction (Air Cleaner) (English)
| 22***10 | Decal, Socket (English) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Service Instruction (Air Cleaner) (French)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Service Instruction (Air Cleaner) (Indonesian)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Service Instruction (Air Cleaner) (Persian)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Service Instruction (Air Cleaner) (Russian)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Service Instruction (Air Cleaner) (Spanish)
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Marks And Plates : Service Instruction (Air Cleaner) (Turkish)
Miscellaneous
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Additional Step (For Wide Shoe)
| 01***60 | Capscrew | 8 |
| 01***13 | Nut,(For Adjustable Rod) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 16 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Blind Parts (Arm)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
| 07***40 | Flange,Split (For Shipping) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Blind Parts (Arm) (For 1-Actuator)
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Blind Parts (Body)
| 01***32 | Washer, (Without Emergency Steering) | 32 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 7 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Blind Parts (Body) (For 1-Actuator)
| 01***32 | Washer, (Without Emergency Steering) | 36 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 7 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Blind Parts (Boom Cylinder)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Blind Parts (Boom)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
| 07***40 | Flange,Split (For Shipping) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Blind Parts (Boom) (For 1-Actuator)
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Blind Parts (Boom) (For 1-Actuator) (For Component)
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Blind Parts (Boom) (For Component)
| 01***32 | Washer, (Without Emergency Steering) | 32 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 6 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fuel Refill Pump
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
Operator'S Compartment And Control System
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Air Conditioner
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Air Conditioner (Blower And Duct) (Large Air Flow Type)(#300001-307358)
| 20***20 | Cab Ass'Y,(Without Air Conditioner) | 1 |
| 20***21 | Cab Ass'Y,(Without Air Conditioner) | 1 |
| 20***10 | Cab Ass'Y | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Air Conditioner (Blower And Duct) (Large Air Flow Type)(#307359-)
| 20***30 | Cab Ass'Y,(Big Wind Air Conditioner) | 1 |
| 20***31 | Cab Ass'Y,(Big Wind Air Conditioner) | 1 |
| 20***41 | Glass | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Air Conditioner And Heater Less
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Fire Extinguisher (Arabic)
| 01***16 | Screw | 7 |
| 01***16 | Screw | 6 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Fire Extinguisher (Chinese)
| 01***16 | Screw | 2 |
| 01***20 | Screw | 4 |
| 01***20 | Screw | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Fire Extinguisher (English)
| 20***50 | Cab Ass'Y,(Vandalism Protection) | 1 |
| 20***51 | Cab Ass'Y,(Vandalism Protection) | 1 |
| 20***41 | Glass | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Fire Extinguisher (French)
| 01***20 | Bolt - Mount Risers To Cab Floor | 12 |
| 20***70 | Door Ass'Y,(Vandalism Protection) | 1 |
| 20***71 | Door Ass'Y,(Vandalism Protection) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Fire Extinguisher (Persian)
| 01***20 | Bolt - Mount Risers To Cab Floor | 12 |
| 20***20 | Door Ass'Y | 1 |
| 20***21 | Door Ass'Y | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Fire Extinguisher (Russian)
| 01***12 | Screw | 4 |
| 01***16 | Screw,(With Payload Meter) | 4 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor Mat (For 1-Actuator)(#300001-305349)
| 01***16 | Screw,(With Payload Meter) | 4 |
| 01***16 | Screw | 1 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor Mat (For 1-Actuator)(#305350-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor Mat (For 2-Actuator)(#300001-305349)
| 01***75 | Capscrew | 3 |
| 01***85 | Bolt - M8 X 85lg | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor Mat (For 2-Actuator)(#305350-)
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor Mat(#300001-305349)
| 01***12 | Bolt | 3 |
| 20***80 | Clip | 2 |
| 20***53 | Cover | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor Mat(#305350-)
| 01***12 | Screw | 4 |
| 01***20 | Bolt | 4 |
| 20***20 | Retainer | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor Mounts
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Front Full Guard
| 01***12 | Bolt | 3 |
| 20***80 | Clip | 2 |
| 20***53 | Cover | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Front Guard
| 01***40 | Bolt | 1 |
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***25 | Bolt | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Half Guard
| 01***12 | Bolt | 3 |
| 20***80 | Clip | 2 |
| 20***53 | Cover | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Heater
| 20***60 | Cab Ass'Y,(Vandalism? Komtrax) | 1 |
| 20***61 | Cab Ass'Y,(Vandalism? Komtrax) | 1 |
| 20***62 | Cab Ass'Y,(Vandalism? Komtrax) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Mode Selection Connectors
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Mode Selection Connectors (High-Altitude Arrangement) (3800 Meter)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Mode Selection Connectors (High-Altitude Arrangement) (4600 Meter)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Mode Selection Connectors (High-Altitude Arrangement) (5000 Meter)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window)
| 01***25 | Screw | 2 |
| 01***16 | Bolt,L.H | 3 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window) (For Vandalism Protection)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***12 | Screw,Sems | 6 |
| 01***16 | Screw | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window) (For Vandalism Protection) (With Air Conditioner)
| 01***12 | Screw (2) | 2 |
| 01***16 | Screw (Without Radio) (1) | 8 |
| 01***12 | Screw | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab And Window) (With Large Air Flow Type Air Conditioner)
| 01***20 | Screw | 2 |
| 01***20 | Screw | 2 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Conditioner And Komtrax Controller) (Orbcom Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 5 |
| 01***25 | Screw | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Conditioner Controller)
| 08***00 | Diode | 2 |
| 08***65 | Cable | 1 |
| 08***35 | Cap, Terminal | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct) (With Air Conditioner)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***45 | Screw | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Air Duct) (With Large Air Flow Type Air Conditioner)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***08 | Screw,(For Tops Canopy) | 2 |
| 01***08 | Screw | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate) (With Air Conditioner)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Luggage Plate) (With Large Air Flow Type Air Conditioner)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***08 | Screw,(For Tops Canopy) | 2 |
| 01***08 | Screw | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Main Harness Clamp)(#300001-307371)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***40 | Bolt (Op) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Main Harness Clamp)(#307372-)
| 19***70 | Hose | 1 |
| 20***90 | Valve | 1 |
| 20***91 | Grommet | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover) (With Air Conditioner)(#300001-300394)
| 01***16 | Bolt,L.H | 2 |
| 08***76 | Band | 2 |
| 17***30 | Element,Air | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover) (With Heater)(#300001-300394)
| 01***10 | Bolt - Relay And Flasher Mounting | 2 |
| 01***12 | Bolt,(See Fig. K0210-16a0) | 4 |
| 01***20 | Bolt,See Fig. K4010-11a0 | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover) (With Heater)(#300395-)
| 01***10 | Bolt - Relay And Flasher Mounting | 2 |
| 01***12 | Bolt | 2 |
| 08***13 | Clip | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover)(#300001-300394)
| 01***16 | Bolt | 2 |
| 01***20 | Bolt | 6 |
| 01***23 | Washer,(Without Air Con.) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover)(#300395-) : Unit_02_of_02
| 01***10 | Bolt - Relay And Flasher Mounting | 9 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 6 |
| 01***60 | Bolt, Mounting | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor And Cover)(#300395-) : Unit_01_of_02
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***20 | Bolt | 5 |
| 01***23 | Washer,(Without Air Con.) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor Cover)
| 01***20 | Screw | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 1 |
| 04***08 | Clip | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Monitor Duct)
| 07***10 | Plug,(With Payload Meter) | 2 |
| 07***26 | Clamp,Hose | 1 |
| 07***28 | Hose | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Partition And Filter)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***35 | Bolt | 2 |
| 01***45 | Screw | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Partition And Filter) (With Air Conditioner)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover)
| 19***70 | Hose | 1 |
| 20***90 | Valve | 1 |
| 20***70 | Grommet | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover) (With 12v Converter)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 02***08 | O-Ring (Kit) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Rear Cover) (With Komtrax)
| 01***25 | Bolt,See Fig. K4010-65a0 | 1 |
| 01***32 | Washer, (Without Emergency Steering) | 1 |
| 20***11 | Lever,R.H | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab In Parts) (Sub Plate And Relay)
| 01***30 | Bolt,(Not Used When Towing Winch) | 5 |
| 01***25 | Screw | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Door Lock)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Door)
| 01***16 | Screw | 4 |
| 01***16 | Screw | 3 |
| 01***23 | Washer | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Door) (For Vandalism Protection)
| 01***20 | Bolt | 1 |
| 01***16 | Screw | 4 |
| 01***16 | Screw | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (1st. Attachiment Control)
| 01***12 | Screw | 3 |
| 01***20 | Screw | 1 |
| 01***20 | Capscrew | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (2nd. Attachiment Control)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Hose Blind Parts) (With Heater)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Hose)
| 10***30 | Cap | 1 |
| 20***40 | Switch | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Unit Less Cover)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Air Conditioner Unit)
| 10***30 | Cap | 1 |
| 20***20 | Switch | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? L.H.)(#300001-300023)
| 08***36 | Band,(For 2nd Travel Speed) (Op) | 1 |
| 08***36 | Tie, Cable | 1 |
| 08***23 | Tie, Cable | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? L.H.)(#300024-)
| 20***70 | Hose? 1450mm | 1 |
| 20***70 | Hose? 1500mm | 1 |
| 20***90 | Hose? 3000mm | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Arm Rest? R.H.)(#300001-300023)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 17 |
| 01***75 | Bolt | 1 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Base)
| 01***12 | Screw | 3 |
| 01***20 | Screw | 1 |
| 01***20 | Capscrew | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Consol? L.H.)
| 01***20 | Bolt | 1 |
| 08***36 | Tie, Cable | 1 |
| 20***40 | Hose? 300mm | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Consol? R.H.)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Consol? R.H.) (With Large Air Flow Type Air Conditioner)
| 08***19 | Band - Tie Hose To Wire Harness | 5 |
| 78***00 | Cable Ass'Y | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Consol? R.H.)(#300024-)
| 20***21 | Switch | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Foot Rest? L.H.)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Foot Rest? R.H.)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***16 | Screw | 2 |
| 01***10 | Screw | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Frame)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness Clamp And Earth)
| 01***16 | Bolt - Box Mounting | 5 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness)
| 01***25 | Bolt,See Fig. K4010-65a0 | 1 |
| 01***32 | Washer, (Without Emergency Steering) | 1 |
| 20***21 | Lever,(R.H.) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (With Orbcom Type Komtrax)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 02***08 | O-Ring (Kit) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Harness) (With Overload Alarm)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 02***08 | O-Ring (Kit) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Heater Hose)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Heater Hose) (With Heater)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever? L.H.)
| 01***12 | Screw | 3 |
| 01***20 | Screw | 1 |
| 01***20 | Capscrew | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Lever? R.H.)
| 20***70 | Hose? 1450mm | 1 |
| 20***70 | Hose? 1500mm | 1 |
| 20***90 | Hose? 3000mm | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Hose Clamp)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio Less)
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 09***00 | Clamp,(For Joystick Lever) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio) (For Asia)
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***10 | Clip,(See Fig.0311a Or 0321) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Lock Lever And Radio) (For U.S.A.)
| 01***12 | Bolt | 1 |
| 20***90 | Plate | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Piping For Pilot Valve)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C. Piping For Pilot Valve) (For Additional Piping)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P.P.C.Piping For Travel Valve)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P? T Block And Seal)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P? T Block And Seal) (1 Actuator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (P? T Block And Seal) (2 Actuator)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Rear Camera Cable)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Rear Camera Cable) (With 2-Camera)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Travel Control)
| 01***16 | Bolt - Box Mounting | 6 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***16 | Screw | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? L.H.)
| 01***25 | Bolt,(Rear Attachment Less) | 7 |
| 01***20 | Screw | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 7 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? L.H.) (For Heatproof)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 7 |
| 01***20 | Screw | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 7 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? R.H.)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Valve? R.H.) (For Heatproof)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***30 | Bolt - M8 X 30lg | 10 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Window Washer Hose)
| 01***16 | Bolt - Box Mounting | 5 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Floor) (Window Washer Hose) (With Rear Camera)
| 01***12 | Screw | 3 |
| 01***20 | Screw | 1 |
| 01***20 | Capscrew | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Front Lower Window)
| 01***25 | Bolt | 3 |
| 01***12 | Screw | 4 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Front Window)
| 01***16 | Screw | 7 |
| 01***16 | Screw | 6 |
| 01***16 | Bolt | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Komtrax Film Antenna And Galeo Plate) (Orbcom Type)(#300001-305349)
| 01***25 | Bolt, Sems | 9 |
| 01***23 | Washer,(Without Air Con.) | 9 |
| 20***60 | Seat | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Komtrax Film Antenna And Galeo Plate) (Orbcom Type)(#305350-)
| 01***25 | Bolt, Sems | 9 |
| 01***23 | Washer,(Without Air Con.) | 9 |
| 20***60 | Seat | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Open Lock And Door Catch)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Plug Bolt And Galeo Plate) (For Vandalism Protection)(#305350-)
| 01***16 | Bolt,L.H | 2 |
| 08***76 | Band | 1 |
| 20***10 | Collar | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Plug Bolt And Galeo Plate)(#300001-305349) : Unit_02_of_02
| 01***16 | Bolt,L.H | 2 |
| 08***76 | Band | 2 |
| 17***30 | Element,Air | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Plug Bolt And Galeo Plate)(#300001-305349) : Unit_01_of_02
| 01***25 | Bolt, Sems | 9 |
| 01***23 | Washer,(Without Air Con.) | 9 |
| 20***60 | Seat | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Plug Bolt And Galeo Plate)(#305350-)
| 01***12 | Bolt,(See Fig. K0210-16a0) | 2 |
| 20***20 | Seal (Bonded) | 1 |
| 20***41 | Seal (Bonded) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Puressure Valve And Grip)
| 01***16 | Screw | 1 |
| 01***23 | Washer | 1 |
| 20***72 | Lighter, Cigarette | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Puressure Valve And Grip) (With Air Conditioner)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Roof Cover And Air Intake)
| 01***16 | Screw,(With Payload Meter) | 2 |
| 01***16 | Screw | 6 |
| 01***16 | Screw | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Roof Ventilator)
| 01***25 | Bolt | 3 |
| 01***12 | Screw | 4 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Speaker And Window Washer)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Wiper And Room Lamp)
| 01***12 | Screw | 3 |
| 01***16 | Screw | 3 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 10 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Seat (Pvc Leather)
| 01***32 | Washer | 2 |
| 02***51 | Bolt | 2 |
| 09***02 | Washer,(For Shipping) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Seat (Rigid Type)
| 01***25 | Bolt, Sems | 4 |
| 01***25 | Bolt | 4 |
| 01***32 | Washer | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Seat (Suspension Type)
| 01***25 | Bolt | 4 |
| (2***2) | Seat Ass'Y,(See Fig. Y1570-01h1) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Seat (Suspension Type) (For North America)
| 01***32 | Washer | 2 |
| 20***10 | Belt | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Rain Visor
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Seat Belt (50mm Wide)
| 01***32 | Washer | 2 |
| 02***57 | Bolt | 2 |
| 09***02 | Washer,(For Shipping) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Seat Belt (78mm Wide)
| 01***80 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***20 | Bolt | 2 |
| 01***12 | Screw | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Seat Belt (78mm Wide) (Non-Cinching)
| 01***25 | Bolt,(Without Gps Antenna Bracket) | 6 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 6 |
| 13***60 | Collar | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Sun Visor
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Top Guard (Level 2)
| 01***50 | Bolt | 4 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 8 |
| 20***32 | Guard | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Window Washer
| 01***20 | Bolt,(Without Air Con.) | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 20***80 | Trim | 1 |
Service Kit And Component Parts
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Air Cleaner (Innner Parts)
| 20***11 | Pump Ass'Y,Refuelling | 1 |
| 20***90 | Adapter | 2 |
| 20***30 | Cable Kit | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Air Conditioner Unit
| 20***11 | Air Conditioner | 1 |
| ND***52 | Plate | 1 |
| ND***60 | Clamp | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Arm Cylinder (100 Hours Lubricating)
| 01***75 | Capscrew - M16 | 12 |
| 01***48 | Washer,Spring (For Slag Handling), Washer-Spring | 12 |
| 07***25 | O-Ring,Cylinder Head | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Arm Cylinder (500 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Boom Cylinder (L.H.) (100 Hours Lubricating)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Boom Cylinder (L.H.) (500 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Boom Cylinder (R.H.) (100 Hours Lubricating)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Boom Cylinder (R.H.) (500 Hours Lubricating)
| 01***75 | Bolt (Kit) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Bucket Cylinder (100 Hours Lubricating)
| 01***50 | Bolt,(Not Used When With Cab) | 6 |
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***34 | O-Ring,(For Front Attachment) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Bucket Cylinder (500 Hours Lubricating)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Burst Valve (For Boom Cylinder) (For Arm Crane)
| 01***20 | Screw | 2 |
| 01***25 | Screw | 2 |
| 01***35 | Bolt | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Clamshell Cylinder
| 01***45 | Bolt | 10 |
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***34 | O-Ring,(For Front Attachment) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Filter (Inner Parts)
| 20***81 | Filter Ass'Y | 1 |
| 20***91 | Filter | 1 |
| 70***90 | O-Ring | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Fuel Self Charge Pump (Inner Parts)
| 20***02 | Seat Ass'Y | 1 |
| AS***22 | Hi Riser Spring Kit,Height Riser | 1 |
| AS***18 | Tether Belt Kit | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Lock Valve
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
| 07***24 | O-Ring | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (1/11)
| (****0) | Ring,Wire | 1 |
| (****0) | Seat | 1 |
| (****0) | Seal | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (10/11)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (11/11)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (2/11)
| (****5) | O-Ring | 1 |
| (****0) | Bolt | 4 |
| (7***0) | Pump Ass'Y | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (3/11)
| 04***22 | Bolt, Eye - Lifting | 1 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 2 |
| 07***34 | O-Ring,(F2370-57a0 -42 ) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (4/11)
| (****1) | Seat | 1 |
| (****0) | Retainer,Shoe | 1 |
| (****0) | Piston Sub Ass'Y | 9 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (5/11)
| (****0) | Ring,Wire | 1 |
| (****0) | Seat | 1 |
| (****0) | Seal | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (6/11)
| (****0) | Ring | 1 |
| (****5) | O-Ring | 1 |
| (****0) | Bolt | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (7/11)
| 01***08 | Nut (Op) | 1 |
| 07***34 | O-Ring,(F2370-57a0 -42 ) | 1 |
| 70***80 | Valve Ass'Y | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (8/11)
| 01***35 | Screw | 6 |
| 07***08 | O-Ring | 2 |
| 07***08 | Ring,Back-Up | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Pump (9/11)
| 01***70 | Bolt,(With Wear Guard) | 12 |
| 01***16 | Screw,Nylon | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (1/21)
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 12 |
| 70***60 | Ball | 8 |
| 72***10 | Spring | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (10/21)
| 01***45 | Bolt | 14 |
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (11/21)
| 07***07 | O-Ring - (K10) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***07 | Ring,Back-Up | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (12/21)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 72***00 | Valve Ass'Y,Suction | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (13/21)
| 01***35 | Screw | 4 |
| 01***16 | Capscrew | 1 |
| 01***55 | Bolt | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (14/21)
| 01***60 | Capscrew | 1 |
| 01***70 | Bolt | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (15/21)
| 01***25 | Screw | 4 |
| 01***80 | Bolt | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (16/21)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (17/21)
| 01***70 | Bolt | 4 |
| 07***24 | O-Ring | 1 |
| 72***10 | Block | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (18/21)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (19/21)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (2/21)
| 07***24 | O-Ring | 3 |
| 72***11 | Case | 1 |
| 72***30 | Plug | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (20/21)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 1 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (21/21)
| 01***80 | Bolt | 4 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (3/21)
| 07***24 | O-Ring | 2 |
| 72***11 | Case | 2 |
| 72***30 | Plug | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (4/21)
| 01***20 | Bolt | 22 |
| 07***24 | O-Ring | 2 |
| 07***80 | O-Ring | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (5/21)
| 07***12 | O-Ring, Divider Valve Mounting | 16 |
| 07***21 | O-Ring (Kit) | 5 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (6/21)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 8 |
| 70***20 | O-Ring | 8 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (7/21)
| 01***90 | Bolt,(Without Cab) | 4 |
| 01***55 | Bolt | 4 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (8/21)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1-Actuator) (9/21)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (1/17)
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 12 |
| 70***60 | Ball | 8 |
| 72***10 | Spring | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (10/17)
| 01***45 | Bolt | 14 |
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (11/17)
| 07***07 | O-Ring - (K10) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***07 | Ring,Back-Up | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (12/17)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 72***00 | Valve Ass'Y,Suction | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (13/17)
| 01***35 | Screw | 4 |
| 01***16 | Capscrew | 1 |
| 01***55 | Bolt | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (14/17)
| 01***60 | Capscrew | 1 |
| 01***70 | Bolt | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (15/17)
| 01***25 | Screw | 4 |
| 01***80 | Bolt | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (16/17)
| 01***75 | Bolt | 4 |
| 07***10 | O-Ring | 2 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (17/17)
| 01***70 | Bolt | 4 |
| 01***80 | Bolt | 4 |
| 07***10 | O-Ring | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (1/23)
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 12 |
| 70***60 | Ball | 8 |
| 72***10 | Spring | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (10/23)
| 01***45 | Bolt | 14 |
| 07***20 | O-Ring,(0202-007) | 1 |
| 07***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (11/23)
| 07***07 | O-Ring - (K10) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
| 07***07 | Ring,Back-Up | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (12/23)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 72***00 | Valve Ass'Y,Suction | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (13/23)
| 01***35 | Screw | 4 |
| 01***16 | Capscrew | 1 |
| 01***55 | Bolt | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (14/23)
| 01***60 | Capscrew | 1 |
| 01***70 | Bolt | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (15/23)
| 01***25 | Screw | 4 |
| 01***80 | Bolt | 4 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (16/23)
| 01***75 | Bolt | 4 |
| 07***10 | O-Ring | 2 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (17/23)
| 01***70 | Bolt | 4 |
| 07***24 | O-Ring | 1 |
| 72***10 | Block | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (18/23)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (19/23)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (2/23)
| 07***24 | O-Ring | 3 |
| 72***20 | Plug | 1 |
| 72***11 | Case | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (20/23)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (21/23)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (22/23)
| 07***24 | O-Ring | 1 |
| 70***90 | O-Ring,Suction | 1 |
| 72***00 | Valve Ass'Y | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (23/23)
| 01***80 | Bolt | 4 |
| 07***10 | O-Ring | 1 |
| 07***11 | O-Ring,(Tm8202-009) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (3/23)
| 07***24 | O-Ring | 2 |
| 72***11 | Case | 2 |
| 72***30 | Plug | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (4/23)
| 01***20 | Bolt | 22 |
| 07***24 | O-Ring | 2 |
| 07***80 | O-Ring | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (5/23)
| 07***12 | O-Ring, Divider Valve Mounting | 16 |
| 07***21 | O-Ring (Kit) | 5 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (6/23)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 8 |
| 70***20 | O-Ring | 8 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (7/23)
| 01***90 | Bolt,(Without Cab) | 4 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (8/23)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2-Actuator) (9/23)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (2/17)
| 07***24 | O-Ring | 3 |
| 72***11 | Case | 1 |
| 72***30 | Plug | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (3/17)
| 07***24 | O-Ring | 2 |
| 72***11 | Case | 2 |
| 72***30 | Plug | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (4/17)
| 01***20 | Bolt | 22 |
| 07***24 | O-Ring | 2 |
| 07***80 | O-Ring | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (5/17)
| 07***12 | O-Ring, Divider Valve Mounting | 16 |
| 07***21 | O-Ring (Kit) | 5 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (6/17)
| 07***34 | O-Ring,See Fig. K4010-65a0 | 8 |
| 70***20 | O-Ring | 8 |
| 72***00 | Valve Ass'Y | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (7/17)
| 01***90 | Bolt,(Without Cab) | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 07***07 | O-Ring - (K10) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (8/17)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Main Valve (9/17)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***10 | O-Ring (Kit) | 1 |
| 70***20 | Ring, Back-Up | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Operator'S Seat Ass'Y
| 04***22 | Bolt, Eye - Lifting | 1 |
| 07***09 | O-Ring | 1 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Operator'S Seat Ass'Y (Pvc Leather)
| 04***25 | Ring,(W/Emergency Steering) (1m?1d) | 1 |
| 70***61 | Seal, Oil | 1 |
| 70***60 | Spacer | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Operator'S Seat Ass'Y (Suspension)
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 5 |
| 70***40 | Orifice | 2 |
| 70***50 | Plug | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Ppc Valve (For 1-Attachment)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 01***12 | Bolt | 3 |
| 07***08 | O-Ring,(Tm8202-005) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Ppc Valve (For 2-Attachment)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 70***30 | Ppc Valve, Assembly | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Ppc Valve (For Travel) (1/2)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***55 | Screw | 2 |
| 01***06 | Screw | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Ppc Valve (For Travel) (2/2)
| 01***35 | Bolt | 3 |
| 01***23 | Washer,(For Shipping) | 3 |
| 07***07 | O-Ring - (K10) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Ppc Valve (For Work Equipment)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***30 | Pilot Valve | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Ppc Valve (For Work Equipment) (For Heatproof)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 70***10 | Pilot Valve | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Rubber Antenna
| 20***02 | Seat Ass'Y | 1 |
| AS***22 | Hi Riser Spring Kit,Height Riser | 1 |
| AS***99 | Damper Kit | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Safety Valve (175? 210? 250? 280 Kg/Cm2)
| 07***24 | O-Ring | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 1 |
| 72***00 | Valve Ass'Y,(210kg/Cm2) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Safety Valve (280/175? 280/210? 280/250 Kg/Cm2)
| 07***24 | O-Ring | 1 |
| 72***01 | Valve Ass'Y,Suction And Safety | 1 |
| 72***00 | Valve Ass'Y,(280/250kg/Cm2) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Selector Valve
| 01***30 | Bolt | 2 |
| 01***40 | Screw | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Service Valve (1/3) (For 1-Actuator)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Service Valve (1/3) (For 2-Actuator)
| 01***20 | Bolt | 4 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***21 | O-Ring (Kit) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Service Valve (2/3) (For 1-Actuator)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Service Valve (2/3) (For 2-Actuator)
| 01***45 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Service Valve (3/3) (For 1-Actuator)
| 07***24 | O-Ring | 2 |
| 72***00 | Valve Ass'Y | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Service Valve (3/3) (For 2-Actuator)
| 07***24 | O-Ring | 1 |
| 72***00 | Valve Ass'Y | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Shoe Bolt And Nut Service Kit
| 13***21 | Nut (Y0320-K4) | 200 |
| 20***41 | Shoe Bolt And Nut K | 1 |
| 20***51 | Shoe Bolt And Nut K | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Machinery Ass'Y (For Supply)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***45 | Bolt,(With Water Separator Type) | 12 |
| 01***40 | Capscrew | 18 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (1/3)(#300001-300023)
| 01***50 | Bolt,(Not Used When With Cab) | 6 |
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***34 | O-Ring,(For Front Attachment) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (1/3)(#300024-306072)
| 01***45 | Bolt | 10 |
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***34 | O-Ring,(For Front Attachment) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (1/3)(#306073-)
| 01***50 | Bolt,(Not Used When With Cab) | 6 |
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***34 | O-Ring,(For Front Attachment) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (2/3)(#300001-300023)
| 04***18 | Ring,Snap (Without R.P.C.U.) | 1 |
| 04***20 | Ring, Snap | 1 |
| 70***80 | Seal,Oil | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (2/3)(#300024-306072)
| 04***18 | Ring,Snap (Without R.P.C.U.) | 1 |
| 04***20 | Ring, Snap | 1 |
| 70***20 | Spacer | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (2/3)(#306073-)
| 04***18 | Ring,Snap (Without R.P.C.U.) | 1 |
| 04***20 | Ring, Snap | 1 |
| 70***80 | Seal,Oil | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (3/3)(#300001-300023)
| 01***25 | Screw | 2 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (3/3)(#300024-306072)
| 01***25 | Screw | 2 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (3/3)(#306073-)
| 01***25 | Screw | 2 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (For Asia) (1/3)
| 01***50 | Bolt,(Not Used When With Cab) | 6 |
| 07***20 | O-Ring,(0202-007) | 2 |
| 07***34 | O-Ring,(For Front Attachment) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (For Asia) (2/3)
| 04***18 | Ring,Snap (Without R.P.C.U.) | 1 |
| 04***20 | Ring, Snap | 1 |
| 70***10 | Seal,Oil | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swing Motor (For Asia) (3/3)
| 01***25 | Screw | 2 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 2 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swivel Joint(#300001-307375)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Swivel Joint(#307376-)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Track Link Ass'Y (90 Set) (Supply Parts)
| 20***00 | Track Link Ass'Y,60 | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
| 20***71 | Bushing? Master,Master | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Travel Motor (1/2)
| 01***35 | Screw | 12 |
| 07***06 | O-Ring,(Not Shown) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Travel Motor (2/2)
| 04***25 | Ring, Snap | 1 |
| 70***91 | Seal,Oil | 1 |
| 70***30 | Spacer? 3.2mm | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Valve (For Accumulator)
| 01***32 | Washer, (Without Emergency Steering) | 1 |
| 02***13 | Union | 1 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
Swing Circle And Related Parts
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Swing Circle And Related Parts : Swing Circle
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 01***60 | Washer | 36 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Swing Circle And Related Parts : Swing Machinery (Gauge And Drain Piping)(#300001-300023)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Swing Circle And Related Parts : Swing Machinery (Gauge And Drain Piping)(#300024-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Swing Circle And Related Parts : Swing Machinery (Motor And Machinery)
| 01***45 | Bolt,(With Water Separator Type) | 12 |
| 01***40 | Capscrew | 18 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Swing Circle And Related Parts : Swing Machinery (Motor And Machinery) (For Asia)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Swing Circle And Related Parts : Swivel Joint
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Travel And Lower Piping
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Travel And Lower Piping : Final Drive
| 01***60 | Capscrew | 36 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Travel And Lower Piping : Travel Piping
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 02***20 | Hose | 2 |
| 02***19 | Hose | 2 |
Under Carriage
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Carrier Roller
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***82 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Full Roller Guard
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Idler And Cushion (Front Idler)
| 07***60 | O-Ring,(F4350-59a0 -6 ) | 2 |
| 07***24 | Plug | 1 |
| 19***02 | Floating Seal Ass'Y | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Idler And Cushion (Idler Cushion)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Idler And Cushion (Idler Cushion) (For North America/Australia)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Idler And Cushion (Idler Cushion) (For North America/Australia) (Improve Of Rust Prevention)
| 01***80 | Screw | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| 11***86 | Floating Seal Ass'Y | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Idler And Cushion (Idler Cushion) (Improve Of Rust Prevention)
| 01***45 | Washer,(Without R.O.P.S.) | 56 |
| 20***60 | O-Ring | 2 |
| 20***16 | Track Roller Ass'Y | 14 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Idler And Cushion (Idler Cushion) (Improve Of Rust Prevention) (Level 1)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***60 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Frame
| 01***50 | Bolt - Differential Carrier | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
| 20***60 | Guard | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Frame (With Full Roller Guard)
| 01***50 | Bolt - Differential Carrier | 24 |
| 01***15 | Nut (Op) | 14 |
| 01***45 | Washer,(Without R.O.P.S.) | 28 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Roller
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***71 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Roller Guard
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Shoe (Flat Type) (600mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***51 | Track Shoe Ass'Y,60 | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Shoe (Roadliner) (600mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***31 | Track Shoe Ass'Y,70 | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Shoe (Swamp Type) (860mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***40 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Shoe (Triple Grouser With Hole) (500mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***41 | Track Shoe Ass'Y,80 | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Shoe (Triple Grouser With Hole) (600mm Wide)
| 13***21 | Nut (Y0320-K4) | 360 |
| 20***21 | Track Shoe Ass'Y | 1 |
| 20***41 | Bushing? Regular,Regular | 86 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Shoe (Triple Grouser With Hole) (700mm Wide)
| 01***65 | Bolt,(Without Rops) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Shoe (Triple Grouser With Hole) (800mm Wide)
| 01***65 | Bolt,(Without Rops) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Track Shoe (Triple Grouser) (600mm Wide) (Holes To Equip With City Pad)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 20***20 | Cover | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Under Carriage : Under Cover (For Track Frame)
Work Equipment
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (1.8m) (500 Hours Greasing Type)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (1.8m) (500 Hours Greasing Type) (For 1-Actuator)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (1.8m) (500 Hours Greasing Type) (For South Africa)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.4m) (100 Hours Greasing Type)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.4m) (100 Hours Greasing Type) (For 1-Actuator)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.4m) (500 Hours Greasing Type)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
| 20***30 | Link | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.4m) (500 Hours Greasing Type) (For 1-Actuator)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.9m) (100 Hours Greasing Type) (For 1-Actuator)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.9m) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.9m) (500 Hours Greasing Type) (For 1-Actuator) : Unit_02_of_02
| 01***16 | Nut - M20 | 8 |
| 20***30 | Link | 2 |
| 20***70 | Pin | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.9m) (500 Hours Greasing Type) (For 1-Actuator) : Unit_01_of_02
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.9m) (500 Hours Greasing Type) (For 1-Actuator) (For North America)
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
| 20***30 | Link | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.9m) (Heavy Duty) (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.9m) (Heavy Duty) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (2.9m) (Heavy Duty) (500 Hours Greasing Type) (For North America)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Additional Piping) (For 1-Actuator) (For 1.8m Arm)
| 01***16 | Nut - M20 | 4 |
| 09***08 | Pin,(Without Pin Puller) | 1 |
| 17***30 | Point,(For Multi Ripper) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Additional Piping) (For 1-Actuator) (For 2.4m Arm)
| 20***20 | Plate (Welded) | 1 |
| 20***30 | Plate,(L.H.) (Welded) | 1 |
| 20***40 | Plate,(R.H.) (Welded) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Additional Piping) (For 1-Actuator) (For 2.9m Arm)
| 01***60 | Capscrew | 12 |
| 01***16 | Nut - M20 | 4 |
| 01***19 | Nut - M24 | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Cylinder Hose And Spacer) (For 2.4m Arm)
| 01***20 | Bolt,(For Mono Lever Steering) | 10 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***50 | Capscrew | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Cylinder Hose And Spacer) (For 2.9m Arm)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Cylinder Hose) (For 1-Actuator) (For 1.8m Arm)
| 20***90 | Bolt | 1 |
| 20***10 | Collar | 2 |
| 20***10 | Bucket,Slope Finishing | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Cylinder Hose) (For 1-Actuator) (For 2.4m Arm)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***10 | Adapter,(Welded) | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Cylinder Hose) (For 1-Actuator) (For 2.9m Arm)
| 20***20 | Link,Linkno Bucket | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Cylinder Hose) (For 1.8m Arm)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Cylinder Hose) (For 2.4m Arm) (For Turkey)
| 01***30 | Nut | 8 |
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 3 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Link) : Unit_02_of_02
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Link) : Unit_01_of_02
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***40 | Flange,Split (For Shipping) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Link) (For 1.8m And 2.4m Arm)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm (Bucket Link) (With Arm Crane) (500 Hours Greasing Type)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm Cylinder (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm Cylinder (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm Cylinder (500 Hours Greasing Type) (For Shipping)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Arm Cylinder (For Burst Valve)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (5.7m Boom) (500 Hours Greasing Type)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 2 |
| 07***90 | Seal,Dust (Kit) | 2 |
| 20***51 | Bracket (Welded) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (5.7m Boom) (Heavy Duty) (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (5.7m Boom) (Heavy Duty) (500 Hours Greasing Type)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 2 |
| 07***90 | Seal,Dust (Kit) | 2 |
| 20***51 | Bracket (Welded) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Additional Lines) (For 1-Actuator)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,L.H. (Final Coating) | 1 |
| (7***0) | Cylinder Group,R.H. (Final Coating) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Arm And Bucket Cylinder Lines)
| 01***30 | Bolt,(Not Used When Towing Winch) | 26 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Arm And Bucket Cylinder Lines) (With Arm Crane)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 4 |
| 07***20 | Plug,(For Without Center Guard) | 16 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Arm Lock Valve Line)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,R.H. (Final Coating) | 1 |
| (7***0) | Cylinder Group,L.H. (Final Coating) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Arm Lock Valve)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Attachment Plug)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Lubricating Line And Harness)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***75 | Bolt - Tube Mounting | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Lubricating Line And Working Lamp)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 6 |
| 20***50 | Spacer? 2.0mm | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Lubricating Line And Working Lamp) (For 1-Actuator)
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| (7***0) | Cylinder Group,R.H. (Final Coating) | 1 |
| (7***0) | Cylinder Group,L.H. (Final Coating) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Lubricating Line And Working Lamp) (Seal Less)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 6 |
| 20***70 | Spacer? 1.5mm | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Top Pin And Arm Cylinder Bottom Pin) (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 26 |
| 01***32 | Washer, (Without Emergency Steering) | 40 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom (Top Pin And Arm Cylinder Bottom Pin) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom Cylinder (100 Hours Greasing Type)
| (7***0) | Cylinder Group,(Final Coating) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom Cylinder (500 Hours Greasing Type)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 6 |
| 20***20 | Spacer? 1.0mm | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom Cylinder (500 Hours Greasing Type) (For Shipping)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 1 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom Cylinder (For Burst Valve)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom Cylinder (Large Diameter Type) (500 Hours Greasing Type)
| (7***0) | Cylinder Group,(Final Coating) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom Cylinder Head Pin (100 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom Cylinder Head Pin (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Boom Cylinder Head Pin (For Large Diameter Type Cylinder) (500 Hours Greasing Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Breaker Adapter (Accumulator Related Parts) (For Krupp) : Unit_02_of_02
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Breaker Adapter (Accumulator Related Parts) (For Krupp) : Unit_01_of_02
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Breaker Adapter (Adapter Parts) (For Krupp)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Breaker Adapter (For Atlas And Okada)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Breaker Adapter (For Matsuda And Furukawa)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Breaker Adapter (For Nippon Pneumatic) : Unit_02_of_02
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Breaker Adapter (For Nippon Pneumatic) : Unit_01_of_02
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket (Hook)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket (O-Ring And Spacer)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket (Spacer)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 0.5m3? 750mm (Horizontal Pin Type)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***80 | Cutter,(L.H.) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 0.5m3? 750mm (Vertical Pin Type)
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 20***70 | Tooth | 6 |
| 20***20 | Adapter (Welded) | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 0.6m3? 865mm (Vertical Pin Type)
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 0.8m3? 1150mm (Horizontal Pin Type)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 0.8m3? 1150mm (Horizontal Pin Type) (Strengthened)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 0.8m3? 1150mm (Vertical Pin Type)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 0.9m3? 1200mm (Horizontal Pin Type)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 0.9m3? 1200mm (Vertical Pin Type)
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 1.0m3? 1330mm (Horizontal Pin Type)
| 20***80 | Plug,For Hb1200 | 2 |
| 20***30 | Adapter | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 1.0m3? 1330mm (Vertical Pin Type)
| 20***30 | Spacer? 1.5mm | 2 |
| 20***80 | O-Ring | 2 |
| 20***40 | Spacer? 0.8mm | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 1.17m3? 1450mm (Horizontal Pin Type)
| 20***70 | Hook (Welded) | 1 |
| 20***40 | Plate (Welded) | 1 |
| 20***50 | Bracket (Welded) | 1 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Bucket? 1.17m3? 1450mm (Vertical Pin Type)
| 20***50 | Plug | 2 |
| 20***40 | Adapter | 2 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Clamshell Bucket
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Ditch Cleaning Bucket? 0.8m3? 1800mm
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Finishing Bucket
| 20***72 | Tooth | 6 |
| 20***81 | Pin | 6 |
| 20***91 | Lock | 6 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Parts For Less Arm
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Parts For Less Bucket
| 01***05 | Bolt | 3 |
| 01***10 | Nut,(Without Air Conditioner) | 6 |
| 01***16 | Nut - M20 | 4 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Ripper Bucket? 0.61m3? 950mm
| 01***30 | Nut | 8 |
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Single Shank Ripper
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Three Shank Ripper
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-8(S/N 300001-Up (Ecot3; Overseas Version)) : Work Equipment : Trapezoidal Bucket
| 01***55 | Capscrew | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
PC200-8(S/N 300001-UP (ecot3; Overseas Version)) serial number reference
On the Komatsu PC200-8 (ecot3, Overseas/Export Standard Version, S/N 300001-UP) the machine serial number plate is located at the lower-right corner of the operator's cab front post, visible when standing beside the machine on the right side; a secondary stamping of the same number is pressed into the right-side main frame rail near the cab. For this specific catalog, the serial number is a purely numeric string beginning with '300001' — there is no alphabetic prefix on the plate itself for the standard overseas-version catalog. To confirm your machine's catalog, read the full numeric serial from the plate and match it against the range table in the parts book or shop manual. Alpha-prefixed serials (A88xxx, C6xxxx) belong to separate Komatsu catalog families and require their own distinct parts books.
| Prefix | Identifies | Notes |
|---|---|---|
| 300001 | PC200-8 (S/N 300001-UP, ecot3, Export Standard / Overseas Version) — standard-track hydraulic excavator | Parts book states 'Export Standard Serial No. 300001 and up' with SAA6D107E-1 engine. Shop manual covers PC200-8 / PC200LC-8 S/N 300001-UP. The serial number is a purely numeric string beginning at 300001; no alpha prefix is documented for this specific catalog family. |
| A88001 | PC200LC-8 (long-undercarriage variant, S/N A88001-UP) — separate catalog, ecot3 era; Latin America spec noted | Confirmed as a distinct, separate parts catalog (catalog code PC200LCE). This is NOT part of the S/N 300001-UP overseas export-standard catalog. Internal sub-breaks confirmed at A88001–A88565, A88566–A91172, and A91173-UP (affecting cooling components). The catalog explicitly references Latin America spec for certain configurations. Include this entry only if your machine carries an 'A88xxx' serial plate. Confirm regional specification and applicable sub-break with your Komatsu dealer. |
| C60001 | PC200-8 (S/N C60001-UP) — separate catalog, ecot3 era; regional specification unconfirmed | Confirmed as a distinct, separate parts catalog (catalog code PC200L0B). A second catalog break at C62001-UP is also confirmed. This is NOT part of the S/N 300001-UP overseas export-standard catalog. The researcher's attribution to a Thailand/KBC plant is single-source and unverified; the catalog page references 'KAL SPEC.' (Korea specification) in electrical components, not a Thailand designation. Thailand/KBC plant attribution should be treated as unverified until confirmed with a Komatsu dealer. Include this entry only if your machine carries a 'C6xxxx' serial plate. |
Frequently asked questions
What engine does the Komatsu PC200-8 (S/N 300001-UP, ecot3, Overseas Version) use?
It uses the Komatsu SAA6D107E-1, a 6-cylinder, 6.69 L (408 cu in) water-cooled turbocharged and aftercooled diesel engine with a high-pressure common-rail (HPCR) electronic fuel injection system. Net power output is 110 kW (148 hp) and gross output is 116 kW (155 hp), both at 2,000 rpm. The engine meets Tier 3 / EU Stage IIIA emission standards under Komatsu's ecot3 designation.
What is the operating weight of the Komatsu PC200-8 (S/N 300001-UP, ecot3)?
Operating weight ranges from 19,900 to 20,010 kg (43,870 to 44,115 lb) depending on configuration — standard versus long-carriage (PC200LC-8) and arm length choice. The figure varies by configuration and installed attachments.
What replaced the Komatsu PC200-8, and what did it succeed?
The PC200-8 succeeded the PC200-7, which used the older SAA6D102E-2 engine with conventional mechanical fuel injection. The PC200-8 was itself replaced by the PC200-8M0, which retained the same SAA6D107E-1 engine family but introduced hydraulic system refinements that reduced fuel consumption by approximately 7 percent compared to the PC200-8.
What PC200-8(S/N 300001-UP (ecot3; Overseas Version)) owners discuss
Why does my PC200-8 (S/N 300001-UP, ecot3 overseas version) sometimes feel sluggish or underpowered during heavy digging, even though no fault codes appear?
Community consensus on heavy-equipment forums points to several layered causes specific to the ecot3 emission-control engine used in the overseas 300001-UP build. The SAA6D107E-1 engine in this series uses an electronically controlled fuel-injection system that actively de-rates output when intake-air restriction is detected — a dirty air filter or a partially collapsed inner element will trigger a subtle power reduction before any warning lamp illuminates. A second widely-discussed cause is a lazy or sticking main pump PC-EPC solenoid: the PC200-8 uses a load-sensing hydraulic circuit and if the electronic pressure-compensation solenoid is slow to respond, the pump displacement does not rise quickly under sudden demand, producing the 'soft' feel owners describe. Cleaning or replacing the EPC solenoid valve is a common field fix. Third, forum members note that the ecot3 calibration uses a fuel-temperature correction: on hot days with old or aerated fuel, rail pressure can drop slightly and cause momentary sluggishness. Finally, confirm the work-mode selector is not inadvertently set to Economy mode, which limits pump flow on this variant.
What are the most common hydraulic oil-temperature and overheating complaints for the PC200-8 (300001-UP ecot3 overseas) and what do experienced mechanics recommend?
The hydraulic oil cooler on the PC200-8 is positioned in a tandem cooler stack and the plastic-fin hydraulic cooler core is highly susceptible to mud and debris bridging across the fins. Recommend blowing out the cooler stack from the engine side with compressed air at every 250-hour service. If overheating persists after cleaning, the thermostat-style bypass valve inside the hydraulic tank return circuit should be inspected — this valve can stick open on machines with high hours, allowing oil to bypass the cooler permanently. Check hydraulic oil level with the arm and bucket cylinders fully retracted and the boom lowered; incorrect level check with cylinders extended gives false high reading, and the system actually runs low, accelerating heat buildup.
What undercarriage wear patterns do owners and dealers see most often on a used PC200-8 (ecot3, 300001-UP), and how do they evaluate remaining life?
Forum threads and dealer pre-purchase inspection guides consistently identify the following wear sequence: track-shoe grouser tip wear and plate cracking appear first, followed by bushing outer-diameter wear from abrasive soil infiltration, then sprocket-tooth flank wear, and finally track-link pin bore elongation. Mechanics use the pin pitch measurement method — measuring the total length of a known number of links against the factory pitch specification — to estimate bushing wear percentage. The front idler on this series is oil-filled and the seal frequently weeps at high hours; a dry idler surface with fine dirt caking around the hub end is the tell-tale sign. Track tension should be checked on flat ground; the PC200-8 specification is approximately 320–340 mm (12.6–13.4 in) measured as the gap at the longest unsupported span of the lower track. Dealers also examine carrier-roller flanges for side-load cracking on machines that have done extensive side-hill or slope work.
What engine-related quirks and service pitfalls are specific to the SAA6D107E-1 ecot3 engine in the PC200-8 (300001-UP overseas version)?
The SAA6D107E-1 ecot3 engine has a set of well-documented quirks discussed across expert service blogs and Komatsu dealer technician forums. The EGR system tends to deposit carbon inside the EGR cooler and the intake manifold; decarbonizing the EGR cooler is recommended at every second or third major service (roughly every 4,000–6,000 hours depending on duty cycle and fuel sulfur content). The common-rail fuel injectors in this series are sensitive to water contamination — the fuel-water separator bowl must be drained at every daily check. The ecot3 engine requires a CJ-4 or CK-4 rated engine oil to protect the EGR components; operators who use older-specification oils report accelerated soot loading. The cooling-system thermostat on this engine series is known to stick partially open rather than fully closed, causing the engine to take excessively long to reach operating temperature. Coolant should be changed at the 4,000-hour or 2-year mark with genuine Komatsu Super Coolant (AF-NAC) or an equivalent OAT coolant; mixing coolant types has caused silicate gel precipitation in several documented cases on this variant.
What electrical and sensor faults appear most repeatedly in owner and mechanic discussions about the PC200-8 (S/N 300001-UP, ecot3 overseas)?
Electrical issues dominate a significant portion of PC200-8 troubleshooting threads. The most consistently reported faults are: pressure sensor failures on the main pump delivery circuit — the pressure sensors used for load-sensing feedback fatigue over time producing intermittent or oscillating hydraulic behavior rather than a hard fault code, making it easy to misdiagnose as a mechanical pump issue. The machine-monitor and pump-controller communicate over the internal CAN bus and can develop connector-pin corrosion, especially on machines that have worked in humid tropical environments; technicians recommend dielectric grease application at every major service on all CAN-bus and sensor connectors. The engine-coolant temperature sensor and hydraulic-oil temperature sensor both use a negative-temperature-coefficient thermistor; when they drift or fail, the machine may display false overheating warnings or fail to trigger the fan-speed increase. Several owners also report that the battery-disconnect relay contacts pit and stick after years of service, causing parasitic drain or intermittent no-start conditions. Have your dealer verify any persistent no-start or unexplained battery-drain condition.
What should I specifically inspect when buying a used PC200-8 (ecot3, S/N 300001-UP overseas version)?
Start with the machine-monitor display: enter the service menu and pull the fault-code history — a long history of pump pressure or EGR faults is a red flag even if cleared. Check the actual engine hours against the hour meter and, if possible, the Komatsu Komtrax telematics history, which records hours independently and shows idle-time ratio. Inspect the hydraulic cylinder rod surfaces for scoring or chrome pitting. Pull the hydraulic oil filler cap and smell the oil: a burnt or acidic odor indicates thermal degradation from repeated overheating cycles. Check the engine oil fill cap for creamy or mayonnaise-like deposits indicating coolant intrusion through a head gasket or EGR cooler crack. Rock the bucket linkage pins by hand: excessive play indicates worn pin-boss bores requiring bushing replacement. Examine the swing-ring bearing area for grease purging out of abnormal locations. Test all work modes and confirm the auto-idle and auto-shutdown functions operate correctly. Have your dealer perform a hydraulic pump delivery-pressure test and a main-relief pressure check before purchase. Safety-critical note: any machine showing active faults related to brake or swing-brake circuits, or any abnormal travel-drift on a slope, should be independently inspected by an authorized Komatsu dealer before purchase or operation.
How does the load-sensing hydraulic system on the PC200-8 (300001-UP ecot3) behave differently from older Komatsu machines, and what maintenance does it need that operators often overlook?
The PC200-8 in the 300001-UP range uses a variable-displacement axial-piston main pump with an electronic load-sensing control system — a significant evolution from the purely mechanical load-sensing on earlier PC200-6 and PC200-7 machines. The pump's displacement is modulated by two solenoid valves that receive signals from the machine controller based on operator demand and sensed load pressure. This system is more sensitive to contaminated pilot oil. Operators consistently report that pilot-oil filter neglect — the pilot filter is a separate fine-mesh element inside the hydraulic tank with no indicator light — causes EPC solenoid orifices to clog, producing symptoms ranging from sluggish response to complete loss of a function. The pilot filter should be inspected at 1,000 hours and replaced at 2,000 hours, or earlier if a hydraulic line has been opened. The swing motor brake-release circuit uses a spring-applied, hydraulic-release swing parking brake, and the brake-release orifice is small enough that contaminated pilot oil can cause slow or partial brake release, producing a characteristic 'groan and jerk' at swing initiation that is often misidentified as a swing motor mechanical problem. Flushing the pilot circuit with clean oil and replacing the pilot filter typically resolves this complaint without any part replacement.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Komatsu PC200-8(S/N 300001-UP (ecot3; Overseas Version)). Related factory variants of the same model family:
PC200-8(S/N 310001-UP)
Need a specific PC200-8(S/N 300001-UP (ecot3; Overseas Version)) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.