Komatsuhydraulic excavatormedium (pc100 - pc270)
Komatsu PC200-3(S/N 20001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu PC200-3 (S/N 20001-up) is a 20-tonne class hydraulic crawler excavator built for general construction and utility digging work. It runs a Komatsu S6D105-1 water-cooled, turbocharged, direct-injection diesel — a 6-cylinder engine displacing around 6.5 liters and rated near 88 kW (roughly 118-120 HP, figures vary slightly by source) at 2100-2150 rpm. Operating weight spans roughly 18.4 to 19.5 tonnes (about 40,600-43,000 lb), depending on whether a given unit left the factory on the standard undercarriage or the wider, longer PC200LC-3 carriage built for extra stability on soft or uneven ground. This serial break covers machines built from around 1986 into 1989, sitting between the earlier PC200-2 (S/N 15001-up) and the later PC200-5 (S/N 45001-up); Komatsu skipped a "-4" model designation entirely between the two. Factory configurations on this serial run included the standard and long-undercarriage chassis plus a range of boom, arm, and bucket combinations, with bucket capacity running from around 0.8 to 1.2 cubic meters depending on the digging application ordered.
Under the skin, the PC200-3 carries Komatsu's third-generation HPV variable-displacement piston pumps running an open-center load-sensing hydraulic system (OLSS) — a simpler control layout than the closed-center load-sensing system Komatsu introduced on later PC200 generations. There is no engine ECM or onboard diagnostics on this machine; everything is mechanically governed, so troubleshooting relies on manual gauges and pressure checks rather than a monitor panel. That mechanical simplicity, plus parts commonality with the earlier PC200-1 and PC200-2 engine family, is a large part of why these units are still active in the used-equipment and rebuild market today. Engines, hydraulic pumps, and undercarriage components for this generation are still remanufactured and stocked by third-party suppliers, and a sound PC200-3 remains a common rebuild candidate or parts donor for shops running fleets of older Komatsu excavators.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu PC200-3(S/N 20001-UP) specifications
Engine
| Model | Komatsu S6D105 diesel, water-cooled, 4-cycle, direct injection, turbocharged |
| Cylinders | 6, inline |
| Bore x stroke | 105 mm x 125 mm (4.13 in x 4.92 in) |
| Displacement | 6.49 L (396 cu in) |
| Power output | 88 kW / 118 HP at 2100 rpm (flywheel rating; a gross/net split is not documented for this serial range) |
| Emissions tier | Produced 1986-1989, ahead of formal off-road diesel emissions tiers; no EPA/Tier rating applies |
Weights
| Operating weight, standard undercarriage (PC200-3) | 18,416 kg (40,600 lb) |
| Operating weight, long-undercarriage variant (PC200LC-3) | approx. 19,160-19,170 kg (42,240-42,260 lb); long-track configuration, distinct from the base PC200-3 |
| Ground pressure | Not documented for this exact serial range - verify with a Komatsu dealer or the shop manual |
| Transport weight | Not separately published for this serial range |
Dimensions
| Transport length | 9.38 m (30 ft 9 in) |
| Transport width | 3.09 m (10 ft 2 in) |
| Transport height | 2.88 m (9 ft 5 in) |
| Standard track shoe width | 710 mm (28 in) |
| Tail swing radius | Not documented for this exact serial range |
| Ground clearance | Not documented for this exact serial range |
| Undercarriage length | Not documented for this exact serial range |
Performance
| Max digging depth | 7.68 m (25 ft 2 in) |
| Max digging reach (horizontal) | 10.69 m (35 ft 1 in) |
| Bucket capacity range (heaped) | 0.50-1.17 m3 (0.65-1.53 cu yd); standard backhoe bucket width 1.45 m (57 in) |
| Max dump height | Not documented for this exact serial range |
| Max cutting height | Not documented for this exact serial range |
| Swing speed | Not documented for this exact serial range |
| Travel speed | Not documented for this exact serial range |
| Gradeability | Not documented for this exact serial range |
| Drawbar pull | Not documented for this exact serial range |
Forces
| Bucket digging force | Not documented for this exact serial range |
| Arm/stick digging force | Not documented for this exact serial range (standard vs long stick comparison unavailable) |
Service capacities (summary)
| Fuel tank | Not documented for this exact serial range |
| Hydraulic system/tank | Not documented for this exact serial range |
| Engine oil | Not documented for this exact serial range |
| Cooling system | Not documented for this exact serial range |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
PC200-3(S/N 20001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not documented in available factory literature for this exact S/N 20001-UP range; verify the exact refill volume against the OMM or your Komatsu dealer before servicing. | Komatsu Genuine engine oil (EO series), API CD/CE quality diesel oil. Use SAE 10W below 0 C (32 F), SAE 30 above 0 C, or an SAE 10W-30 / 15W-40 multigrade where ambient temperature swings through both ranges in one season. |
| Cooling system | Not documented in available factory literature for this exact S/N 20001-UP range; verify against the OMM or dealer records before refilling. | Komatsu genuine permanent-type antifreeze/coolant (ethylene-glycol base) mixed with water to the ratio needed for the lowest expected ambient temperature. Year-round use is recommended for corrosion and cavitation protection, not just for freeze protection. |
| Fuel tank | Not documented in available factory literature for this exact S/N 20001-UP range. | ASTM D975 No. 2-D diesel fuel for normal ambient conditions. Switch to No. 1-D diesel in cold weather to prevent fuel waxing and filter plugging. |
| Hydraulic system total | Not documented in available factory literature for this exact S/N 20001-UP range. | Komatsu Genuine hydraulic oil (HO series), ISO VG46-equivalent, SAE 10W. A lower-viscosity cold-climate grade is available where startup temperatures run well below freezing. |
| Hydraulic tank | Not documented in available factory literature for this exact S/N 20001-UP range. Usable tank volume is smaller than total system capacity, since the system figure also covers cylinders, lines, and the pump/valve circuit. | Same Komatsu Genuine hydraulic oil (HO series) as the full hydraulic system. |
| Final drive (each side) | Not documented in available factory literature for this exact S/N 20001-UP range. | Komatsu Genuine powertrain/gear oil (TO series). Use SAE 10W below 0 C (32 F) and SAE 30 above 0 C. |
| Swing drive | Not documented in available factory literature for this exact S/N 20001-UP range. | Same Komatsu Genuine powertrain oil (TO series) as the final drives, graded SAE 10W / SAE 30 by ambient temperature. |
| Grease (all pins and bushings, spec only) | Not a reservoir fill; applied via grease fittings per the lubrication schedule, no chart capacity applies. | Komatsu Genuine multipurpose lithium-EP grease (G2-LI type), NLGI No. 2, for boom, stick, bucket linkage pins and the swing-circle fittings. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu PC200-3(S/N 20001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 5,000 h |
|
Servicing the PC200-3(S/N 20001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull engine oil samples from the S6D105-1 at every oil change and watch for wear metal, since this pre-electronic diesel has no onboard diagnostics to flag internal problems early. Sample OLSS hydraulic oil too — the third-generation HPV piston pumps are sensitive to contamination and moisture, and dirty oil accelerates swash-plate and valve wear. Check final drive and swing machinery case oil for metal fines at drain intervals; rising fines are usually the first sign of bearing or gear wear before noise or leaks appear.
Corrective & Common Repairs
Expect turbocharger shaft play and oil seal leaks on higher-hour S6D105-1 engines, along with worn HPV pump control linkages that make the OLSS hydraulics feel sluggish or inconsistent until adjusted. Track pin and bushing wear is common given the age of these machines — listen for chain slap and check for turned bushings before they chew into sprockets. Cooling system corrosion and clogged radiator/oil cooler fins are routine on machines this old, and brittle or corroded wiring harness connectors from 1980s-era looms are a frequent source of intermittent electrical faults.
Overhaul & Rebuild Points
At high hour counts, plan on a top-end rebuild for the S6D105-1 — liners, pistons, and injection pump recalibration — plus injector nozzle testing. Hydraulic pump and motor reseal or exchange is standard once OLSS pumps start losing output pressure. Final drive and travel motor reduction gearing should be inspected and rebuilt together rather than piecemeal. Swing bearing bolt torque and gear backlash need checking at overhaul, and full undercarriage replacement — chain, sprockets, idlers, rollers — is typical given how long these machines have been in service.
Seasonal & Environment Servicing
Pre-electronic diesels like the S6D105-1 rely on glow-plug or ether-assist cold starting — test the starting aid circuit before winter rather than after a failed start. Check coolant antifreeze concentration ahead of cold season and drain the fuel water separator more often in humid or wet climates. Consider a lower-viscosity hydraulic oil grade for cold-region OLSS operation, since thick oil slows pump response on startup. In hot, dusty conditions clean radiator and oil cooler fins often, and load-test batteries before winter on these aging machines.
PC200-3(S/N 20001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 600-311-9100 | Fuel Filter Ass'Y | Fuel system service | Check fitment → |
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| 600-181-6740 | Element Assembly, Innner And Outer Air Cleaner | Air intake service | Check fitment → |
| 09637-30161 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 09637-30661 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
PC200-3(S/N 20001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine Oil Pressure Warning Lamp (red, oil-can symbol) | Engine oil pressure has dropped below the safe minimum. | Low oil level, clogged oil filter, worn oil pump, worn main/rod bearings, or a faulty oil pressure switch/sender. | Stop the engine immediately. Check oil level and filter condition, then check pressure with a mechanical gauge before restarting. |
| Charge Warning Lamp (red, battery symbol) | The charging circuit is not charging the battery. | Broken or slipping alternator/fan belt, failed alternator, or a loose or corroded wiring connection. | Check belt tension and wiring at low idle. If the lamp stays lit, have the alternator and regulator tested. |
| Coolant Temperature Gauge in Red Zone (overheat) | Engine coolant temperature has gone above the normal operating range. | Low coolant level, debris-clogged radiator fins, failed thermostat, slipping fan belt, or a worn water pump. | Idle the engine and let it cool. Check coolant level and clean the radiator/oil cooler fins before restarting. Never open a hot radiator cap. |
| Air Cleaner (Air Filter) Restriction Warning Lamp | The intake air filter element is restricting airflow to the engine/turbocharger. | Dust-loaded or collapsed air filter element, or a blocked intake duct. | Stop and inspect the air cleaner element. Clean or replace it before resuming work. |
| Preheat (Glow) Indicator Lamp | Shows the intake air preheat circuit is active during cold-start warm-up. Not itself a fault indicator. | Normal during a cold start. A lamp that stays on after warm-up, or that never lights in cold weather, points to a preheat relay, timer, or heater element fault. | Let the preheat cycle finish before cranking in cold weather. If the lamp behaves abnormally, check the preheat relay and heater element wiring. |
| Fuel Level Gauge - Empty/Low | Fuel tank level has reached the low reserve mark. | Normal fuel consumption. A gauge reading empty right after a full fill points to a stuck sender float or wiring fault. | Refuel. If the gauge still misreads after refueling, check the sender unit and wiring. |
| Hydraulic Oil Temperature Gauge in Red Zone (if equipped) | Hydraulic tank oil temperature has gone above the normal operating range. | Low or contaminated hydraulic oil, a clogged oil cooler, an incorrectly set relief valve, or sustained high-relief operation. | Reduce load and idle to let the system cool. Check oil level and clean the cooler fins. Have relief valve pressure checked if overheating repeats. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
PC200-3(S/N 20001-UP) attachments & work tools
Buckets
Bucket pin diameter on this machine is 80 mm (3.15 in), with roughly 326 mm (12.8 in) between the ear lugs — the same pin/ear pattern shared across the PC200 size class. Pin-on GP buckets for this pattern are commonly offered from about 610 mm (24 in) up to 1220-1520 mm (48-60 in) wide, covering trenching through general-duty digging and ditching work. Heaped GP bucket capacity for this class typically falls around 0.8-1.0 m³ (SAE heaped); some listings for this generation run as high as 1.17 m³, so treat capacity as varying by bucket profile/width rather than one fixed figure. HD/rock buckets use the same pin pattern in narrower, reinforced profiles, generally in the 0.5-0.7 m³ range for this weight class, though no single published rock-bucket capacity was found tied specifically to this serial range — verify with your dealer. Buckets on this generation mount pin-on; hydraulic quick-coupler use is a field retrofit, not a factory arrangement.
Hydraulic hammers
At roughly 18.4-19.2 t operating weight (PC200-3 vs. PC200LC-3), this carrier falls in the class matched to medium-duty hydraulic hammers, commonly cited anywhere from about 900 kg up to 2,000+ kg breaker class depending on brand and duty cycle — sources disagree on the exact bracket, so confirm against the breaker maker's own carrier-weight chart rather than a single number. The general sizing rule used across brands is a breaker weight around 8-10% of carrier operating weight. Required auxiliary oil flow for a hammer in this bracket is commonly cited in the 120-170 L/min range; match the breaker's own flow/pressure spec, since oversizing overloads this machine's hydraulic system.
Quick couplers
This generation predates factory hydraulic quick couplers; attachments mount pin-on as standard. Aftermarket wedge-lock and pin-grabber style couplers (both mechanical lever-actuated and hydraulic cylinder-actuated) sized to the 80 mm pin / 326 mm ear pattern are field-fitted to this class routinely. Confirm pin-center spacing against the specific bucket/linkage before ordering a coupler, since spacing can vary by bucket supplier.
Thumbs/grapples
Hydraulic and mechanical thumb kits are common retrofits on this bucket-pin pattern, used for grading, cleanup, and material handling; both clamp-style mechanical thumbs (spring-loaded or manually indexed) and single-cylinder hydraulic thumbs are offered to bolt onto the same arm/bucket pin. Mechanical grapples — multi-tine rake grapples and rotating log/scrap grapples — are also fitted to this size class for demolition, land-clearing, and scrap/log handling, mounting at the same bucket linkage in place of or alongside a bucket.
Rippers
A single-shank, pin-on ripper matching the 80 mm pin pattern is available for this machine, used to break up hard-packed or frozen ground, weathered rock, and similar material the standard bucket can't penetrate. It mounts on the same bucket pins in place of the bucket.
Hydraulic-kit notes
This machine generally left the factory without a dedicated high-flow attachment circuit. Running a hammer requires adding a one-way (single-direction) auxiliary piping kit — hard line, hose, and a foot-pedal-operated control valve tied into the main hydraulic system at the arm. A one-way, medium-pressure hammer circuit is adequate for a breaker in this machine's weight class. Two-way high-flow circuits, needed for rotating grapples, mulching heads, or similar continuously-driven tools, are not a factory feature on this generation and would need to be engineered and added separately if required.
All PC200-3(S/N 20001-UP) assemblies by section
Every catalogued assembly group for the Komatsu PC200-3(S/N 20001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Engine Related Parts And Electrical System
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Air Intake And Tail Pipe(#20001-26573)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Air Intake And Tail Pipe(#26574-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***11 | Nut,(With Under Mirror) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Auto Deceleration Cylinder (With Auto Deceleration)
| 07***15 | O-Ring,Regulator Valve | 1 |
| 07***28 | O-Ring,(F5350-63a0 -10 ) | 1 |
| 07***15 | Ring,(For 1 Actuater Att.) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Auto Deceleration Cylinder Piping (1/2) (With Auto Deceleration)(#20001-26573)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Auto Deceleration Cylinder Piping (1/2) (With Auto Deceleration)(#26574-)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Auto Deceleration Cylinder Piping (2/2) (With Auto Deceleration)(#20001-21463)
| 01***50 | Screw | 4 |
| 01***13 | Washer,Spring(For Wiper Switch Earth) | 4 |
| 07***06 | O-Ring,Corrosion Resistor | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Auto Deceleration Cylinder Piping (2/2) (With Auto Deceleration)(#21464-)
| 01***50 | Screw | 4 |
| 01***13 | Washer,Spring(For Wiper Switch Earth) | 4 |
| 07***06 | O-Ring,Corrosion Resistor | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Battery
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Damper
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 20***10 | Damper,Disk | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Elactrical System (Wiring) (2/2) (With Auto Deceleration? Swing Mechanical Brake? 3-Stage)(#20001-21463)
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Related Parts) (Without Auto Deceleration? Swing Mechanical Brake) (With 2-Stage)(#20001-25923)
| 01***08 | Screw, Terminal | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 7 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Related Parts) (Without Auto Deceleration? Swing Mechanical Brake) (With 2-Stage)(#25924-)
| 01***08 | Screw, Terminal | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Related Parts)(#20001-26573)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Related Parts)(#26574-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (1/2) (With Auto Deceleration? Swing Mechanical Brake? 3-Stage)(#20001-25923)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 23 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (1/2) (With Auto Deceleration? Swing Mechanical Brake? 3-Stage)(#25924-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (1/2) (Without Auto Deceleration? Swing Mechanical Brake) (With 2-Stage)(#20001-25923)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 23 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (1/2) (Without Auto Deceleration? Swing Mechanical Brake) (With 2-Stage)(#25924-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (1/2) (Without Auto Deceleration? With Swing Mechanical Brake? 3-Stage)(#25924-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (2/2) (With Auto Deceleration? Swing Mechanical Brake? 3-Stage)(#21464-25923)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (2/2) (With Auto Deceleration? Swing Mechanical Brake? 3-Stage)(#25924-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 7 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (2/2) (Without Auto Deceleration? Swing Mechanical Brake) (With 2-Stage)(#20001-25923)
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (2/2) (Without Auto Deceleration? Swing Mechanical Brake) (With 2-Stage)(#25924-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (2/2) (Without Auto Deceleration? With Swing Mechanical Brake? 3-Stage)(#25924-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 11 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (Attachment Side)
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 1 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 1 |
| 20***90 | Plate | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (Without Auto Deceleration? Swing Mechanical Brake) (With 2-Stage)(#20001-25923)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***20 | Screw (Not Illustrated) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System (Wiring) (Without Auto Deceleration? Swing Mechanical Brake) (With 2-Stage)(#25924-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System(Wiring)(1/2)(With Auto Deceleration?Without Swing Mechanical Brake?With 2-Stage)(#25924-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Electrical System(Wiring)(2/2)(With Auto Deceleration?Without Swing Mechanical Brake?With 2-Stage)(#25924-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Engine Mount
| 01***35 | Bolt, Hydraulic Tank Mounting | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| 20***11 | Cushion | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Fuel Control Lever (For Long Lever Control)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***50 | Screw | 1 |
| 01***65 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Fuel Control Lever (For Wrist Control)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***50 | Screw | 1 |
| 01***65 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Fuel Control Linkage (Without Auto Deceleration)(#20001-26431)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Fuel Control Linkage (Without Auto Deceleration)(#26432-)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***08 | Washer,(Not Used For Cold Weather) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Fuel Tank
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Hydraulic Tank Mounting | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (1/2) (For Long Lever Control)(#20001-20150)
| 01***08 | Screw, Terminal | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 7 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (1/2) (For Long Lever Control)(#20151-25923)
| 01***08 | Screw, Terminal | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 7 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (1/2) (For Long Lever Control)(#25924-)
| 01***08 | Screw, Terminal | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (1/2) (For Wrist Control)(With Auto Deceleration? Swing Mechanical Brake? 3-Stage)(#20001-25923)
| 01***08 | Screw, Terminal | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 7 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (1/2) (For Wrist Control)(With Auto Deceleration? Swing Mechanical Brake? 3-Stage)(#25924-)
| 01***08 | Screw, Terminal | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (2/2) (For Long Lever Control)(#20001-20331)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***16 | Screw,(Sandy And Dusty Terrain S.) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (2/2) (For Long Lever Control)(#20332-25923)
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***20 | Screw (Not Illustrated) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (2/2) (For Long Lever Control)(#25924-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (2/2) (For Wrist Control)(With Auto Deceleration? Swing Mechanical Brake? 3-Stage)(#20001-25923)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***20 | Screw (Not Illustrated) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Instrument Panel (2/2) (For Wrist Control)(With Auto Deceleration? Swing Mechanical Brake? 3-Stage)(#25924-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Monitor Panel And Related Parts (With 2-Stage Selector Mode Olss)(#20001-30309)
| 01***08 | Screw | 4 |
| 01***12 | Screw | 12 |
| 01***05 | Washer,(Without Window Washer) | 16 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Monitor Panel And Related Parts (With 2-Stage Selector Mode Olss)(#30310-)
| 01***12 | Screw | 8 |
| 01***05 | Washer,(Without Window Washer) | 8 |
| 08***03 | Bulb? 3w,Turn Signal Lamp | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Monitor Panel And Related Parts (With 3-Stage Selector Mode Olss)(#20001-30309)
| 01***08 | Screw | 4 |
| 01***12 | Screw | 12 |
| 01***05 | Washer,(Without Window Washer) | 16 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Monitor Panel And Related Parts (With 3-Stage Selector Mode Olss)(#30310-)
| 01***12 | Screw | 8 |
| 01***05 | Washer,(Without Window Washer) | 8 |
| 08***03 | Bulb? 3w,Turn Signal Lamp | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Radiator And Oil Cooler
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Engine Related Parts And Electrical System : Radiator Guard And Piping
| 01***16 | Bolt (With Air Heater & Conditioner) | 16 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Optional Parts
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Attachment Side) (1/3)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***80 | Bolt, Mount Tubes To Switch And Work Pumps | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 40 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Attachment Side) (For Short Arm) (2/3)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
| 01***80 | Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***35 | Bolt,(Not Used With Rops Canopy) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Attachment Side) (For Short Arm) (3/3)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
| 01***80 | Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***35 | Bolt,(Not Used With Rops Canopy) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Attachment Side) (For Standard Arm) (2/3)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
| 01***80 | Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***35 | Bolt,(Not Used With Rops Canopy) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Attachment Side) (For Standard Arm) (3/3)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
| 01***80 | Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***35 | Bolt,(Not Used With Rops Canopy) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Change Rotor And Swivel Joint)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
| 01***40 | Bolt,(With Service Valve R.H.) | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 17 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Control Valve To Change Rotor)
| 01***30 | Bolt,(For Mechanical Governor) | 24 |
| 01***20 | Bolt | 8 |
| 01***11 | Nut,(With Under Mirror) | 14 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Krupp Breaker)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 2 |
| 07***35 | O-Ring, Upper Cooler Inlet And Outlet Ports | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Montabert Breaker)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 2 |
| 07***49 | Flange, Split - Divider Valve End | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Nippon Pneumatic Breaker) (1/2)
| 01***14 | Nut | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Nippon Pneumatic Breaker) (2/2)
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Pilot) (For Long Lever Control)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Without Shutter) | 1 |
| 01***06 | Seat (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Pilot) (For Wrist Control)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Without Shutter) | 1 |
| 01***06 | Seat (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Return)(#20001-20739)
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Return)(#20740-24675)
| 01***32 | Washer, (Without Emergency Steering) | 12 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 2 |
| 07***35 | O-Ring, Upper Cooler Inlet And Outlet Ports | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Additional Piping (Return)(#24676-)
| 01***32 | Washer, (Without Emergency Steering) | 12 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 2 |
| 07***35 | O-Ring, Upper Cooler Inlet And Outlet Ports | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Air Conditioner Piping (Cooling)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***11 | Nut,(With Under Mirror) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Air Conditioner Piping (Heating)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Air Piping And Air Conditioner Related Parts(#20001-27576)
| 01***12 | Bolt,(With Cylinder Cover) | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 12 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Air Piping And Air Conditioner Related Parts(#27577-)
| 01***12 | Bolt,(With Cylinder Cover) | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 12 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Arm Cylinder Lock Valve (Rexroth) (For Bottom Side) (Except Japan)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Arm Cylinder Lock Valve (Rexroth) (For Head Side) (Except Japan)
| 01***22 | Bolt,(10m) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Boom Cylinder Lock Valve (Rexroth) (Except Japan)
| 01***22 | Bolt,(10m) | 8 |
| 01***60 | Bolt,(For Japan And Sweden) | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Bucket Cylinder Lock Valve (Rexroth) (For Large Diameter Cylinder) (Except Japan)
| 01***22 | Bolt,(10m) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Bucket Cylinder Lock Valve (Rexroth) (For Standard Cylinder) (Except Japan)
| 01***22 | Bolt,(10m) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Car Cooler Piping (1/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Car Cooler Piping (2/2)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Car Cooler Related Parts (For Long Lever Control)(#20001-21787)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Car Cooler Related Parts (For Long Lever Control)(#21788-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Car Cooler Related Parts (For Wrist Control)(#20001-21787)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Car Cooler Related Parts (For Wrist Control)(#21788-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cold Weather (With Auto Deceleration) Specifications (1/6)
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
| 08***35 | Cap, Terminal | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cold Weather (With Auto Deceleration) Specifications (2/6)
| 07***23 | O-Ring,(F4350-61a1b-29 ) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 4 |
| 07***08 | Plug,See Fig. K4010-63a0 | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cold Weather (With Auto Deceleration) Specifications (3/6)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***50 | Bolt,(With Service Valve R.H.) | 1 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cold Weather (With Auto Deceleration) Specifications (4/6)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cold Weather (With Auto Deceleration) Specifications (5/6)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***08 | Seat (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cold Weather (With Auto Deceleration) Specifications (6/6)
| 20***00 | Pre Heater Ass'Y | 1 |
| 20***10 | Heater | 1 |
| 20***20 | Nozzle Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cold Weather (With Swing Mecahnical Brake) Specifications (2/2)(#20001-22682)
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 5 |
| 07***08 | Plug,See Fig. K4010-63a0 | 1 |
| 07***03 | Hose,(See Fig.4611-12) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cold Weather (With Swing Mechanical Brake) Specifications (1/2)
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
| 08***35 | Cap, Terminal | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cold Weather (With Swing Mechanical Brake) Specifications (2/2)(#22683-)
| 07***23 | O-Ring,(F4350-61a1b-29 ) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 4 |
| 07***08 | Plug,See Fig. K4010-63a0 | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Compressor And Control Panel (Car Cooler)
| 20***60 | Case Ass'Y | 1 |
| 20***70 | Switch | 1 |
| 20***80 | Resistor | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Compressor Related Parts (Air Conditioner)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Condenser Unit (Air Conditioner)
| 20***50 | Condenser Ass'Y | 1 |
| 20***50 | Core | 1 |
| 20***60 | Shroud, Fan | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Condenser Unit (Car Cooler)
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Control Linkage (For Additional Piping) (For Long Lever Control)
| 01***75 | Bolt,(For Shipping) | 4 |
| 01***80 | Bolt,(For Long Lever Control) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Control Linkage (For Additional Piping) (For Wrist Control)
| 01***75 | Bolt,(For Shipping) | 4 |
| 01***80 | Bolt,(For Long Lever Control) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Control Pedal (For Additional Piping) (For Long Lever Control)(#20001-23894)
| 01***25 | Bolt,Without Revolution Sensor | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Control Pedal (For Additional Piping) (For Long Lever Control)(#23895-)
| 01***25 | Bolt,Without Revolution Sensor | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Control Pedal (For Additional Piping) (For Wrist Control)(#23895-)
| 01***25 | Bolt,Without Revolution Sensor | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Control Pedal (For Aditional Piping) (For Wrist Control)(#20001-23894)
| 01***25 | Bolt,Without Revolution Sensor | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Control Unit (Air Conditioner)
| 20***60 | Control Ass'Y | 1 |
| 20***00 | Switch | 1 |
| 20***10 | Ornament | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cooling Unit (Air Conditioner)
| 20***10 | Cooling Unit | 1 |
| 20***10 | Case Ass'Y | 1 |
| 20***20 | Case Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Cooling Unit (Car Cooler)
| 20***60 | Evaporator | 1 |
| 20***70 | Case Ass'Y | 1 |
| 20***80 | Grille Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Defroster(#20001-25923)
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Defroster(#25924-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Deluxe Seat And Seat Belt (1/2)(#20001-20331)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Deluxe Seat And Seat Belt (1/2)(#20332-)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Deluxe Seat And Seat Belt (2/2)
| 20***30 | Adjuster Ass'Y | 1 |
| 20***50 | Handle | 1 |
| 20***00 | Seat Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Electrical System (Air Conditioner)
| 01***16 | Bolt (With Air Heater & Conditioner) | 12 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 12 |
| 19***60 | Bushing | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Falling Objective Protective Structure
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***40 | Bolt,(With Center Guard) | 32 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Freon Gas Compressor (Air Conditioner)
| 04***20 | Ring, Snap | 1 |
| 14***90 | Bearing | 2 |
| 14***10 | Clutch Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Front Guard
| 01***25 | Bolt | 7 |
| 01***19 | Seat,(Welded To Revolving Frame) | 7 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 7 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Head Guard
| 01***65 | Bolt, Mount Radiator To Frame (Bottom) | 6 |
| 01***32 | Seat (Welded) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Heater-Less (1/2)(#20001-25923)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
| 09***06 | Cap - Machines Without Rear Wiper | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Heater-Less (1/2)(#25924-)
| 09***06 | Cap - Machines Without Rear Wiper | 1 |
| 09***20 | Cap,(For 3-Point Hitch And Ripper) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Heater-Less (2/2)
| 07***59 | Clamp,See Fig. K4010-05a0 | 4 |
| 19***30 | Hose | 2 |
| 20***20 | Plug | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Lock Valve Piping (For Arm Cylinder) (Except Japan)
| 01***22 | Bolt,(10m) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Lock Valve Piping (For Boom Cylinder) (Except Japan)
| 01***22 | Bolt,(10m) | 8 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 8 |
| 01***75 | Bolt,(For Adjusting) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Lock Valve Piping (For Bucket Cylinder) (For Large Diameter Cylinder) (Except Japan)
| 01***22 | Bolt,(10m) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Lock Valve Piping (For Bucket Cylinder) (For Standard Cylinder) (Except Japan)
| 01***22 | Bolt,(10m) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Multi Adjustable Seat
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Pre Fuel Filter And Piping
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Pump
| 20***30 | Pump | 1 |
| 20***30 | Case | 1 |
| 20***40 | Bracket | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Radio-Less(#20001-22536)
| 01***10 | Screw,(For Lighter) | 6 |
| 01***03 | Nut,(With Joy Stick Steering) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Radio-Less(#22537-)
| 01***10 | Screw,(For Lighter) | 4 |
| 01***03 | Nut,(With Joy Stick Steering) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Rear Working Lamp
| 01***65 | Bolt | 1 |
| 01***11 | Nut (Welded) | 1 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Self Supply Pump
| 07***20 | Hose | 1 |
| 07***59 | Clamp - Drain Hose | 2 |
| 20***20 | Wiring Harness | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Track Frame Under Cover
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
| 01***08 | Seat (Welded) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Water Separater And Piping
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Water Separater? Pre Fuel Filter And Piping
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Optional Parts : Window Washer
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
| 09***00 | Plate? Caution,(Japanese-English) | 1 |
Revolving Frame And Cab
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Car Heater(#20001-25923)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Car Heater(#25924-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Heater Ass'Y (Except Japan)(#20001-33085)
| 20***10 | Heater Ass'Y | 1 |
| ND***41 | Radiator | 1 |
| ND***41 | Bolt And Washer | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Machinery Compartment (1/5)(#20001-26573)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 25 |
| 01***20 | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Machinery Compartment (1/5)(#26574-)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 25 |
| 01***20 | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Machinery Compartment (2/5)(#20001-26573)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Machinery Compartment (2/5)(#26574-)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Machinery Compartment (3/5)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 9 |
| 01***55 | Bolt, Mount Lh Bracket | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Machinery Compartment (4/5)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 40 |
| 01***12 | Bolt | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Machinery Compartment (5/5)(#20001-26573)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***08 | Screw, Terminal | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Machinery Compartment (5/5)(#26574-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 1) (1/6)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 6 |
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 1) (2/6)(#20001-27912)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***16 | Screw, Mount Parking Lights | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 1) (2/6)(#27913-)
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***16 | Screw, Mount Parking Lights | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 1) (3/6)(#20001-24223)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 1) (3/6)(#24224-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 1) (4/6)(#20001-27912)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***16 | Screw, Mount Parking Lights | 14 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 1) (4/6)(#27913-)
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***12 | Screw,(Not Shown) (For Std Cab) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 1) (5/6)
| 01***10 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***10 | Screw,(For Lighter) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 1) (6/6)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***10 | Screw,(With Air Conditioner) | 2 |
| 01***10 | Screw | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 2) (1/6) (Except Japan)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 6 |
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 2) (2/6) (Except Japan)(#20001-27912)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***16 | Screw, Mount Parking Lights | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 2) (2/6) (Except Japan)(#27913-)
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***16 | Screw, Mount Parking Lights | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 2) (3/6) (Except Japan)(#20001-24223)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 2) (3/6) (Except Japan)(#24224-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 2) (4/6) (Except Japan)(#20001-27912)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***12 | Screw,(Not Shown) (For Std Cab) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 2) (4/6) (Except Japan)(#27913-)
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***12 | Screw,(Not Shown) (For Std Cab) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 2) (5/6) (Except Japan)
| 01***10 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***10 | Screw,(For Lighter) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab (Type 2) (6/6) (Except Japan)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***10 | Screw,(With Air Conditioner) | 2 |
| 01***10 | Screw | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab? Floor Frame (For Long Lever Control)(#20001-25923)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***50 | Bolt,(For Strengthened Cover) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab? Floor Frame (For Long Lever Control)(#25924-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***50 | Bolt,(For Strengthened Cover) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab? Floor Frame (For Wrist Control)(#20001-25923)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***50 | Bolt,(For Strengthened Cover) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Cab? Floor Frame (For Wrist Control)(#25924-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***50 | Bolt,(For Strengthened Cover) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Seat (For Long Lever Control)(#20001-20331)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***50 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Seat (For Long Lever Control)(#20332-)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***50 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Seat (For Wrist Control)(#20001-20331)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Operator'S Seat (For Wrist Control)(#20332-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Revolving Frame And Cab : Revolving Frame
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***08 | Screw | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
S6d105-B-1a Engine S/N 61481-Up
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Additional Fuel Filter
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
| 60***00 | Fuel Filter Ass'Y | 1 |
| 60***20 | Cartridge,Pref | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Air Cleaner (Sandy And Dusty Spec.) (Except Japan)(#78805-)
| 08***35 | Indicator,Dust (Japanese-English) | 1 |
| 60***70 | Valve, Vacuator | 1 |
| 60***00 | Air Cleaner Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Air Cleaner(#61481-78804)
| 04***10 | Ring,See Fig. K4010-65a0 | 1 |
| 09***61 | Plate? Instruction,(Japanese-English) (Not Shown) | 1 |
| 60***00 | Element Ass'Y,Outer | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Air Cleaner(#78805-)
| 08***35 | Indicator,Dust (Japanese-English) | 1 |
| 08***35 | Indicator,Dust (Japanese-English) | 1 |
| 09***61 | Plate? Instruction,(Japanese-English) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Air Intake Manifold And Connection(#61481-78804)
| 01***20 | Bolt | 2 |
| 01***50 | Bolt,(For Trimming Dozer) | 1 |
| 01***55 | Bolt,(For Trimming Dozer) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Air Intake Manifold And Connection(#78805-)
| 01***20 | Bolt | 2 |
| 01***50 | Bolt,(For Trimming Dozer) | 1 |
| 01***60 | Bolt,(Without Alternator Bracket) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Alternator (25a) (With Non Hardening Pulley)(#61481-78039)
| 60***80 | Alternator A. (25a),(With Non Hardening Pulley) | 1 |
| KD***52 | Bolt,Through | 3 |
| KD***70 | Rear Bracket Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Alternator (25a) (With Non Hardening Pulley)(#78040-)
| 60***20 | Alternator A. (25a),(With Non Hardening Pulley) | 1 |
| KD***57 | Bearing,Ball? Front | 1 |
| KD***11 | Rear Bracket Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Alternator (35a) (With Hardening Pulley)
| 60***30 | Alternator A. (35a),(With Hardening Pulley) | 1 |
| KD***57 | Bearing,Ball? Front | 1 |
| KD***80 | Collar | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Alternator And Mounting (25a) (Alternator With Non Hardening Pulley)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***30 | Bolt,(For Trimming Dozer) | 1 |
| 01***11 | Nut,(For Center Guard) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Alternator And Mounting (35a) (Alternator With Hardening Pulley)
| 01***65 | Bolt,(For Alternator Bracket Mount) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***70 | Bolt,(With Wear Guard) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Camshaft And Tappet
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 2 |
| 01***16 | Washer,(For Shipping) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Cooling Fan
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Crankshaft
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 6 |
| 01***45 | Bolt,Nylock | 1 |
| 01***36 | Washer,Radio Controlled Slag Handling | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Cylinder Block
| 01***25 | Bolt,(Without Auto Priming System) | 1 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Cylinder Head
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 2 |
| 07***08 | Plug (Kit) | 7 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Cylinder Head Cover(#61481-78995)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 1 |
| 01***16 | Washer,(For 35a Alternator) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Cylinder Head Cover(#78996-)
| 07***30 | Clip | 1 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
| 61***90 | O-Ring,Breather | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Electrical Wiring (With Auto Deceleration)(#61481-71493)
| 01***10 | Bolt | 1 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***20 | Bolt,(Used When Towing Winch) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Electrical Wiring (With Auto Deceleration)(#71494-78805)
| 01***10 | Bolt | 1 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***20 | Bolt,(Used When Towing Winch) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Electrical Wiring (With Auto Deceleration)(#78805-)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 1 |
| 01***20 | Bolt,(Used When Towing Winch) | 3 |
| 01***25 | Bolt - Rear Guard Mounting | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Electrical Wiring (Without Auto Deceleration) (Except Japan)(#61481-71493)
| 01***10 | Bolt | 1 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***20 | Bolt,(Used When Towing Winch) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Electrical Wiring (Without Auto Deceleration) (Except Japan)(#71494-78804)
| 01***10 | Bolt | 1 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***20 | Bolt,(Used When Towing Winch) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Electrical Wiring (Without Auto Deceleration) (Except Japan)(#78805-)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 1 |
| 01***20 | Bolt,(Used When Towing Winch) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Exhaust Manifold And Turbocharger (Except Japan)
| 01***60 | Bolt (M10-1.50x60) | 1 |
| 01***00 | Bolt (M10-1.50x100) | 9 |
| 01***05 | Bolt (M10-1.50x105) | 11 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Flywheel And Flywheel Housing
| 01***40 | Bolt,(Dust And Dirt Protection) | 7 |
| 01***60 | Bolt, Trunnion Cap | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Front Cover And Gear
| 01***22 | Bolt,(Cold Terrain Spec.) | 4 |
| 01***25 | Bolt,(Without Auto Priming System) | 4 |
| 01***60 | Bolt,(Without Alternator Bracket) | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Filter And Piping(#61481-78804)
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Filter And Piping(#78805-)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump (Coupling)
| DK***00 | Bolt | 1 |
| DK***00 | Washer,Lock | 2 |
| DK***00 | Coupling,Cross | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump (Feed Pump)
| DK***20 | Bolt, Joint | 1 |
| DK***60 | Feed Pump Ass'Y | 1 |
| DK***20 | Pump,Priming | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump (Governor) (1/2)
| DK***20 | Flyweight Ass'Y | 1 |
| DK***00 | Adapter | 1 |
| DK***00 | Nut,Lock | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump (Governor) (1/2) (For Sweden)
| DK***20 | Flyweight Ass'Y | 1 |
| DK***00 | Adapter | 1 |
| DK***00 | Nut,Lock | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump (Governor) (2/2)
| DK***40 | Gasket,Air Compressor | 2 |
| DK***20 | Capsule,Spring | 1 |
| DK***00 | Nut,Cap | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump (Governor) (2/2) (For Sweden)
| DK***40 | Gasket,Air Compressor | 2 |
| DK***20 | Capsule,Spring | 1 |
| DK***00 | Nut,Cap | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump (Pump)
| 61***21 | Injection Pump Ass'Y | 1 |
| 61***40 | Injection Pump Ass'Y,(For Sweden) | 1 |
| DK***20 | Housing | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump And Piping
| 01***70 | Bolt | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 1 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 5 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump Linkage (With Auto Deceleration)(#61481-78804)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***16 | Bolt,(With Alternator Cover Type) | 2 |
| 01***03 | Nut; Was 01508-20603, Nut? L.H. Thread,L.H. Thread | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Injection Pump Linkage (With Auto Deceleration)(#78805-)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***03 | Nut; Was 01508-20603, Nut? L.H. Thread,L.H. Thread | 1 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Fuel Nozzle And Spill Pipe
| 01***55 | Bolt,(For Trimming Dozer) | 12 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 12 |
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Gasket Kit
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 1 |
| 07***55 | O-Ring,Front Accessory Drive | 1 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Heater Signal
| 60***71 | Signal,Signal | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Lubricating Oil Cooler
| 01***25 | Bolt,(Without Auto Priming System) | 5 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 3 |
| 01***35 | Bolt,(Without Auto Priming System) | 16 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Lubricating Oil Filter And Mounting(#61481-78804)
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***65 | Bolt,(For Alternator Bracket Mount) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Lubricating Oil Filter And Mounting(#78805-)
| 01***90 | Bolt | 1 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 1 |
| 01***25 | Bolt (M10x1.50x25) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Lubricating Oil Piping(#61481-78804)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***90 | Bolt | 1 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Lubricating Oil Pump And Suction Pipe
| 01***25 | Bolt,(Without Auto Priming System) | 3 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***45 | Bolt,(S6d155-4b) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Muffler And Mounting
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Oil Pan(#61481-97283)
| 01***22 | Bolt,(Cold Terrain Spec.) | 23 |
| 01***25 | Bolt,(Without Auto Priming System) | 10 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 7 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Oil Pan(#97284-)
| 01***22 | Bolt,(Cold Terrain Spec.) | 27 |
| 01***25 | Bolt,(Without Auto Priming System) | 10 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Piston And Connecting Rod
| 04***18 | Ring, Retaining | 2 |
| 61***40 | Crank Pin Metal A | 6 |
| 61***00 | Connecting Rod Ass'Y,(B) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Rocker Arm
| 01***80 | Bolt,(Shim 5 Pieces Over) | 2 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 12 |
| 01***36 | Washer,Radio Controlled Slag Handling | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Starting Motor (5.5kw) (1/2)(#61481-81934)
| 60***80 | Starting Motor Ass'Y,(5.5kw) (See Fig.0661) | 1 |
| KD***30 | Bracket,Center | 1 |
| KD***10 | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Starting Motor (5.5kw) (2/2)(#61481-81934)
| KD***10 | Ring,Clip | 2 |
| KD***10 | Magnetic Switch A | 1 |
| KD***01 | Washer,Seal | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Starting Motor (5.5kw)(#81935-)
| 60***20 | Starting Motor Ass'Y,(5.5kw) | 1 |
| KD***30 | Bracket,Center | 1 |
| KD***50 | Clutch Ass'Y,Over Running | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Starting Motor (7.5kw)
| 60***60 | Starting Motor Ass'Y,(7.5kw) | 1 |
| KD***20 | Magnetic Switch Assembly | 1 |
| KD***40 | Spring,Spring | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Starting Motor And Mounting (5.5kw? 7.5kw)
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 3 |
| 01***36 | Washer,Radio Controlled Slag Handling | 3 |
| (6***0) | Starting Motor Ass'Y,(5.5kw) (See Fig.0661) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Turbocharger (Except Japan)(#61481-78804)
| 61***00 | Turbocharger Ass'Y,(T04b-59) | 1 |
| GA***00 | Clamp | 3 |
| GA***01 | Bolt | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Turbocharger (Except Japan)(#78805-)
| 61***00 | Turbocharger Ass'Y,(T04859-39) | 1 |
| GA***00 | Clamp | 3 |
| GA***01 | Bolt | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Turbocharger Lubricating Oil Piping
| 01***22 | Bolt,(Cold Terrain Spec.) | 2 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Water Pump And Mounting
| 01***30 | Bolt,(Cold Terrain Spec.) | 3 |
| 01***50 | Bolt | 4 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : S6d105-B-1a Engine S/N 61481-Up : Water Separator
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 1 |
| 60***00 | Water Separator A.,(4d105-5h? 4d105-5t) | 1 |
| 60***60 | Plug,Drain (4d105-5h? 4d105-5t) | 1 |
Special Application Parts? Mark Plate? Tool And Kit
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Bucket? 0.65m3 Width 710mm With Hook (For Kac)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***80 | Cutter,(L.H.) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Cab Accessory (For Ussr)(#20001-34965)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***12 | Screw,(With Articulate Indicator) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Cab Accessory (For Ussr)(#34966-)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Cap And Overall (Except Japan)(#30927-)
| 09***50 | Overall,(Special Order) | 1 |
| 09***57 | Cap,(Special Order) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Control Stand (Tbg Spec.)(#20001-25923)
| 20***20 | Rest,Foot? L.H | 1 |
| 20***30 | Rest,Foot? R.H | 1 |
| 20***91 | Box,R.H | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Control Stand (Tbg Spec.)(#25924-)
| 20***20 | Rest,Foot? L.H | 1 |
| 20***30 | Rest,Foot? R.H | 1 |
| 20***60 | Case,L.H | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Damper (Regulation Of Sweden)
| 20***20 | Damper,Disc | 1 |
| (0***0) | Bolt,(See Fig.0407a) | 8 |
| (0***2) | Washer,(See Fig.A1530-A4g3) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (1/2) (Regulation Of Sweden)
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (2/2) (Regulation Of Sweden)(#20001-25923)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (2/2) (Regulation Of Sweden)(#25924-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (For Free Swing) (Except Japan)(#20001-25923)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Screw | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Electrical System (For Free Swing) (Except Japan)(#25924-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt,(Without Cab) | 4 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Emergency Engine Stop Control (Regulation Of Sweden)(#20001-21980)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***03 | Nut; Was 01508-20603, Nut? L.H. Thread,L.H. Thread | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Emergency Engine Stop Control (Regulation Of Sweden)(#21981-25923)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***03 | Nut; Was 01508-20603, Nut? L.H. Thread,L.H. Thread | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Emergency Engine Stop Control (Regulation Of Sweden)(#25924-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Heavy Duty Bucket? 0.54m3 Width 610mm (For Usa)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***90 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Heavy Duty Bucket? 0.65m3 Width 710mm (For Usa)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***90 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Heavy Duty Bucket? 0.79m3 Width 890mm? With Hook (For Usa)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***90 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Heavy Duty Bucket? 0.93m3 Width 965mm? With Hook (For Usa)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***90 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Piping (Bucket Cylinder Line) (For Usa)
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Valve Piping (1/3) (For Usa)
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Valve Piping (2/3) (For Usa)
| 01***85 | Bolt,Spring | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Valve Piping (3/3) (For Usa)
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 4 |
| 07***34 | O-Ring,(Not Used When (B) Spec.) | 2 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Valve Piping (For Free Swing) (1/3) (Except Japan)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Valve Piping (For Free Swing) (2/3) (Except Japan) : Unit_01_of_02
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 8 |
| 01***50 | Bolt,(For Strengthened Cover) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Hydraulic Valve Piping (For Free Swing) (2/3) (Except Japan) : Unit_02_of_02
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***16 | Screw, Mount Parking Lights | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Instrument Panel (Regulation Of Sweden)(#20001-25923)
| 01***12 | Screw,(With Articulate Indicator) | 1 |
| 01***23 | Washer,(With Auto Emergency Steering) | 1 |
| 20***10 | Cap,Black | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Instrument Panel (Regulation Of Sweden)(#25924-)
| 01***12 | Screw,(With Articulate Indicator) | 1 |
| 01***23 | Washer,(With Auto Emergency Steering) | 1 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Line Filter
| 07***11 | O-Ring,(Tm8202-009) | 1 |
| 07***90 | O-Ring,(Y1620-41a0a-11) | 1 |
| 07***35 | O-Ring, Upper Cooler Inlet And Outlet Ports | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Line Filter Piping (1/2)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 8 |
| 01***85 | Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***35 | Bolt, Hydraulic Tank Mounting | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Line Filter Piping (2/2)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (1/2) (Tbg Spec.)(#20001-26573)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***10 | Screw | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (1/2) (Tbg Spec.)(#22330-)
| 01***25 | Bolt,See Fig. K4010-65a0 | 4 |
| 08***16 | Mirror,(Tbg Spec.) | 2 |
| 20***20 | Support | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (1/2) (Tbg Spec.)(#26574-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***10 | Screw | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (2/2) (Tbg Spec.)(#20001-26573)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***10 | Screw | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (2/2) (Tbg Spec.)(#22330-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***12 | Screw,(With Articulate Indicator) | 4 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Machinery Compartment (2/2) (Tbg Spec.)(#26574-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***10 | Screw | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (English) (For Long Lever Control) (With Auto Decel.? Swing Mecha. Brake? 3-Stage)
| 08***35 | Indicator,Dust (Japanese-English) | 1 |
| 09***00 | Plate? Safety,Lock Lever (With Lock Pin) | 1 |
| 09***00 | Plate? Safety,Off Limit Within Swing Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (English) (For Wrist Control) (W/O Auto Decel.? Swing Mecha. Brake) (With 2-Stage)
| 08***35 | Indicator,Dust (Japanese-English) | 1 |
| 09***00 | Plate? Safety,Lock Lever (With Lock Pin) | 1 |
| 09***00 | Plate? Safety,Off Limit Within Swing Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (English)(For Wrist Control)(With Auto Dedeleration?Swing Mechanical Brake?3-Stage)
| 08***35 | Indicator,Dust (Japanese-English) | 1 |
| 09***00 | Plate? Safety,Lock Lever (With Lock Pin) | 1 |
| 09***00 | Plate? Safety,Off Limit Within Swing Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Regulation Of Sweden)
| 15***60 | Seat,Non Slip (Large) | 9 |
| 20***10 | Plate? Operating,Work Equipment | 1 |
| 20***50 | Plate | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates (Tbg Spec.)
| 01***08 | Screw | 4 |
| 09***43 | Plate? Name,(Limited Supply) | 1 |
| 09***43 | Plate? Name,Machine (Limited Supply) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates(Arabic-English)(For Wrist Control)(W/O Auto Decel.?Swing Mecha.Brake)(W/2-Stage)
| 08***40 | Indicator,Dust (Arabic) | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Caution,Kiip Out Of Turning Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates(Chinese)(For Wrist Control)(Without Auto Decel.?Swing Mecha.Brake)(With 2-Stage)
| 08***40 | Indicator,Dust (Chinese) | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Safety,Keep Out Of Turning Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates(French-English)(For Wrist Control)(W/O Auto Decel.?Swing Mecha.Brake)(W/2-Stage)
| 08***41 | Indicator,Dust (French) | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Caution,Keep Out Of Turning Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates(German-English)(For Wrist Control)(W/O Auto Decel.Swing Mecha.Brake)(With 2-Stage)
| 08***35 | Indicator,Dust (German) | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Caution,Keep? Out Of Turning Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates(Indonesian-English)(For Wrist Control)(W/O Auto Decel.?Swing Mecha.Brake?W/2-Stage)
| 08***45 | Indicator,Dust (English-Indonesian) | 1 |
| 08***45 | Indicator,Dust (Indonesian) | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates(Itarian-English)(For Wrist Control)(W/O Auto Decel.?Swing Mecha.Brake)(W/2-Stage)
| 08***40 | Indicator,Dust (English-Italian) | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Safety,Keep Out Of Turning Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates(Persian-English)(For Wrist Control)(W/O Auto Decel.?Swing Mecha.Brake)(W/2-Stage)
| 08***45 | Indicator,Dust | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Safety,Keep Out Of Turning Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates(Russian)(For Wrist Control)(Without Auto Decel.?Swing Mecha.Brake)(With 2-Stage)
| 08***35 | Indicator,Dust | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Caution,Keep Out Of Turning Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Marks And Plates(Spanish-English)(For Wrist Control)(W/O Auto Decel.?Swing Mecha.Brake)(W/2-Stage)
| 08***35 | Indicator,(English-Spanish) | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
| 09***00 | Plate? Caution,Keep Out Of Turning Area | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Modified Chassis Parts (Regulation Of Sweden)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Monitor Panel (Tbg Spec.)(#20001-25923)
| 09***10 | Cap,(For Joy Stick Steering) | 1 |
| 20***10 | Cap,Black | 1 |
| 20***61 | Wire Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Monitor Panel (Tbg Spec.)(#25924-)
| 20***80 | Fuse Box,Fuse | 1 |
| 20***80 | Fuse? 15a,15a | 8 |
| 20***40 | Wiring Harness | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (1/2) (Regulation Of Sweden)
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (2/2) (Regulation Of Sweden)(#20001-22329)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***16 | Screw,(Sandy And Dusty Terrain S.) | 4 |
| 01***12 | Screw,(With Articulate Indicator) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (2/2) (Regulation Of Sweden)(#22330-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***16 | Screw,(Sandy And Dusty Terrain S.) | 4 |
| 01***12 | Screw,(With Articulate Indicator) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (Except Japan) (Ksp Spec.)
| 20***20 | Finisher | 1 |
| 20***40 | Door | 1 |
| 20***50 | Window,Front | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (For Rear Window Sash) (Except Japan)
| 20***70 | Trim,Weather | 1 |
| 20***00 | Sash Ass'Y | 1 |
| 20***10 | Glass, Glass; Was 205-54-73410 | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Operator'S Cab (Tbg Spec.)(#20001-22329)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***10 | Screw,(For Lighter) | 2 |
| 01***12 | Screw,(With Articulate Indicator) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Over Load Warning Device (1/2) (For 50 Feet Long Front) (Tbg Spec.)
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Over Load Warning Device (1/2) (Tbg Spec.)
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Over Load Warning Device (2/2) (Tbg Spec.)
| 01***60 | Bolt,(For Japan And Sweden) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***55 | Bolt | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Periodical Replacement And Safety Parts
| 20***00 | Bucket Cylinder A.,(See Fig.7619.7649.7679) | 1 |
| 20***00 | Boom Cylinder Ass'Y | 1 |
| 20***00 | Boom Cylinder Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Radiator Guard (Regulation Of Sweden)(#20001-26573)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 20***90 | Bracket | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Radiator Guard (Regulation Of Sweden)(#26574-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Rear View Mirror? L.H. (Regulation Of Sweden)(#20001-22329)
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
| 08***16 | Mirror,(Tbg Spec.) | 1 |
| 20***20 | Support | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Rear View Mirror? L.H. (Regulation Of Sweden)(#22330-)
| 01***25 | Bolt,See Fig. K4010-65a0 | 4 |
| 08***16 | Mirror,(Tbg Spec.) | 2 |
| 20***20 | Support | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Revolving Frame (Tbg Spec.)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***11 | Nut - Mounting | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Tool (Except Japan)(#20001-30926)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***00 | Nozzle, Grease Pump (Flexible Type) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Tool(#30927-)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***00 | Nozzle, Grease Pump (Flexible Type) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Special Application Parts? Mark Plate? Tool And Kit : Travel Pedal (For Usa And Canada)(#26050-)
| 20***90 | Bracket,L.H | 1 |
| 20***10 | Bracket,R.H | 1 |
| 20***20 | Cap,Pedal | 2 |
Swing And Control System
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Boom Control Linkage (1/2) (For Long Lever Control)(#20001-24683)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Boom Control Linkage (2/2) (For Long Lever Control)(#20001-24683)
| 01***85 | Bolt,Spring | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Boom Control Piping (For Long Lever Control)(#20001-24683)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Hydraulic Piping (Control Valve To/From Swing Motor)
| 01***30 | Bolt,(For Mechanical Governor) | 24 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Long Lever Control And Stand? L.H. (1/2)
| 01***40 | Bolt,(With Air Conditioner) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Long Lever Control And Stand? L.H. (2/2)(#20001-20860)
| 01***30 | Bolt,(For Mechanical Governor) | 3 |
| 01***40 | Bolt | 1 |
| 01***05 | Nut,L.H. Thread (D31s) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Long Lever Control And Stand? L.H. (2/2)(#20861-)
| 01***30 | Bolt,(For Mechanical Governor) | 3 |
| 01***05 | Nut,L.H. Thread (D31s) | 1 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Long Lever Control And Stand? R.H. (1/2)
| 01***40 | Bolt,(With Air Conditioner) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Long Lever Control And Stand? R.H. (2/2)(#20001-20860)
| 01***30 | Bolt,(For Mechanical Governor) | 3 |
| 01***40 | Bolt | 1 |
| 01***05 | Nut,L.H. Thread (D31s) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Long Lever Control And Stand? R.H. (2/2)(#20861-24683)
| 01***30 | Bolt,(For Mechanical Governor) | 3 |
| 01***05 | Nut,L.H. Thread (D31s) | 1 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Long Lever Control And Stand? R.H. (2/2)(#24684-)
| 01***30 | Bolt,(For Mechanical Governor) | 3 |
| 01***05 | Nut,L.H. Thread (D31s) | 1 |
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Long Lever Stand(#20001-25923)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***16 | Screw | 8 |
| 01***10 | Screw (Op) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Long Lever Stand(#25924-)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 7 |
| 01***16 | Screw | 8 |
| 01***10 | Screw (Op) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : O.L.S.S. Piping (For Long Lever Control)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***14 | Nut | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : O.L.S.S. Piping (For Wrist Control)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***65 | Bolt, Mount Radiator To Frame (Bottom) | 1 |
| 01***14 | Nut | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (1/3) (For Long Lever Control)(#20001-24683)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (1/3) (For Long Lever Control)(#24684-)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (1/3) (For Wrist Control) (With Auto Deceleration) (With Swing Mechanical Brake)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (1/3)(For Wrist Control)(Without Auto Deceleration)(W/O Swing Mechanical Brake)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (2/3) (For Long Lever Control)(#20001-24683)
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 14 |
| 07***10 | Union,(For 2nd Travel Speed) (Op) | 8 |
| 07***10 | Elbow,(For Long Lever Control) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (2/3) (For Long Lever Control)(#24684-24943)
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 13 |
| 07***09 | Plug,(For 2-Actuater Attachment) | 1 |
| 07***08 | Plug,See Fig. K4010-63a0 | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (2/3) (For Long Lever Control)(#24944-)
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 14 |
| 07***08 | Plug,See Fig. K4010-63a0 | 1 |
| 07***10 | Hose,(For Power Tilt Mech Angle) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (2/3) (For Wrist Control) (With Auto Deceleration) (With Swing Mechanical Brake)(#20001-24943)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 14 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (2/3) (For Wrist Control) (With Auto Deceleration) (With Swing Mechanical Brake)(#24944-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 14 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (2/3)(For Wrist Control)(Without Auto Deceleration)(W/O Swing Mechanical Brake)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 14 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (3/3) (For Long Lever Control)(#20001-24683)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (3/3) (For Long Lever Control)(#24684-24943)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (3/3) (For Long Lever Control)(#24944-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (3/3) (For Wrist Control) (With Auto Deceleration) (With Swing Mechanical Brake)(#20001-24943)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (3/3) (For Wrist Control) (With Auto Deceleration) (With Swing Mechanical Brake)(#24944-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : P.P.C. Valve Piping (3/3)(For Wrist Control)(Without Auto Deceleration)(W/O Swing Mechanical Brake)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 13 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Pilot Piping (With Auto Deceleration) (With Swing Mechanical Brake)(#20001-22682)
| 01***60 | Bolt,(For Japan And Sweden) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Pilot Piping (With Auto Deceleration) (With Swing Mechanical Brake)(#22683-24943)
| 01***60 | Bolt,(For Japan And Sweden) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Pilot Piping (With Auto Deceleration) (With Swing Mechanical Brake)(#24944-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 08***14 | Clip,(For Two Levers Steering) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Circle(#20001-32597)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***70 | Bolt | 36 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Circle(#32598-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***70 | Bolt | 36 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Machinery(#20001-22239)
| 01***60 | Bolt (M20-2.50x60) | 12 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Machinery(#22240-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***50 | Bolt,(For Strengthened Cover) | 3 |
| 01***90 | Bolt | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Mechanical Brake Piping (With Auto Deceleration) (With Swing Mechanical Brake)(#20001-26573)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Mechanical Brake Piping (With Auto Deceleration) (With Swing Mechanical Brake)(#26574-)
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Motor (1/2) (With Swing Mechanical Brake)
| 01***50 | Bolt,(Shim Thickness?Less Than 8mm) | 9 |
| 04***30 | Seal, Dust | 1 |
| 70***00 | Swing Motor Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Motor (1/2) (Without Swing Mechanical Brake)
| 01***50 | Bolt,(Shim Thickness?Less Than 8mm) | 9 |
| 04***30 | Seal, Dust | 1 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Motor (2/2) (With Swing Mechanical Brake)
| 07***20 | O-Ring | 1 |
| 07***20 | Ring, Back-Up | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Swing Motor (2/2) (Without Swing Mechanical Brake)
| 07***20 | O-Ring | 1 |
| 07***20 | Ring, Back-Up | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Wrist Control And Stand? L.H.(#20001-23358)
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Wrist Control And Stand? L.H.(#23359-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 15 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Wrist Control And Stand? R.H. (1/2)(#20001-25923)
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Wrist Control And Stand? R.H. (1/2)(#25924-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 9 |
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Wrist Control And Stand? R.H. (2/2)(#20001-23358)
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***25 | Bolt,Without Revolution Sensor | 1 |
| 01***18 | Screw | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Wrist Control And Stand? R.H. (2/2)(#23359-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***25 | Bolt,Without Revolution Sensor | 1 |
| 01***14 | Bolt | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Swing And Control System : Wrist Control Stand? R.H.(#25924-)
| 20***20 | Switch | 1 |
| 20***00 | Knob Ass'Y | 1 |
| 20***80 | Cap | 1 |
Travel And Final Drive
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Final Drive
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***65 | Bolt | 3 |
| 01***40 | Bolt,(With Center Guard) | 38 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Hydraulic Piping (Control Valve To/From Swivel Joint)
| 01***30 | Bolt,(For Mechanical Governor) | 48 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Hydraulic Piping (Swivel Joint To/From Travel Motor)
| 01***30 | Bolt,(For Mechanical Governor) | 32 |
| 01***23 | Washer,(For Shipping) | 32 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Swivel Joint
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 04***30 | Ring, Retaining | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Traval Control Lever And Linkage (1/2) (For Long Lever Control) With Auto Deceleration)(#26050-)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (1/2) (For Long Lever Control) (With Auto Deceleration)(#20001-24943) : Unit_01_of_02
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (1/2) (For Long Lever Control) (With Auto Deceleration)(#20001-24943) : Unit_02_of_02
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (1/2) (For Long Lever Control) (With Auto Deceleration)(#24944-)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (1/2) (For Long Lever Control) (With Auto Deceleration)(#24944-26049)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (1/2)(Without Auto Deceleration)(#20001-24943)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (1/2)(Without Auto Deceleration)(#24944-26049)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (1/2)(Without Auto Deceleration)(#26050-)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (2/2) (For Long Lever Control) (With Auto Deceleration)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***35 | Screw | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (2/2) (For Long Lever Control) With Auto Deceleration)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***35 | Screw | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Control Lever And Linkage (2/2)(Without Auto Deceleration)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***35 | Screw | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Motor (1/2)
| 04***30 | Seal, Dust | 1 |
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 1 |
| 70***00 | Motor Sub Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Travel And Final Drive : Travel Motor (2/2)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 12 |
| 07***11 | O-Ring,(Tm8202-009) | 2 |
Under Carriage
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Carrier Roller(#20001-33477)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***80 | Bolt,(For Adjustable Rod) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Carrier Roller(#33478-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***80 | Bolt,(For Adjustable Rod) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Front Idler(#20001-33477)
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 2 |
| 07***24 | Plug | 1 |
| 13***61 | O-Ring Ass'Y,Retainer | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Front Idler(#33478-)
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 2 |
| 07***24 | Plug | 1 |
| 20***82 | Front Idler Ass'Y | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Recoil Spring(#20001-27700)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 8 |
| 01***34 | Nut | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Recoil Spring(#27701-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***70 | Bolt,Rear Carrier (With Gumpad) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Frame
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 24 |
| 01***50 | Bolt,(For Tree Pusher) | 16 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Roller(#20001-33477)
| 01***80 | Bolt,(For Adjustable Rod) | 56 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 56 |
| 07***55 | O-Ring,Front Accessory Drive | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Roller(#33478-)
| 01***85 | Bolt,(For Perforated Mask) | 56 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 56 |
| 20***60 | O-Ring | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Shoe (Flat Type)(#20001-33762)
| 13***22 | Link,Track? L.H | 90 |
| 13***32 | Link,Track? R.H | 90 |
| 13***41 | Bushing? Regular | 86 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Shoe (Flat Type)(#33763-)
| 15***20 | Nut? Shoe (Y0320-K1) | 410 |
| 20***13 | Track Link Ass'Y,600thgpc200l | 1 |
| 20***53 | Track Shoe Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Shoe (Semi-Double Grouser With Hole)(#20001-33762)
| 13***22 | Link,Track? L.H | 90 |
| 13***32 | Link,Track? R.H | 90 |
| 13***41 | Bushing? Regular | 86 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Shoe (Swamp Type)(#20001-33762)
| 13***22 | Link,Track? L.H | 90 |
| 13***32 | Link,Track? R.H | 90 |
| 13***41 | Bushing? Regular | 86 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Shoe (Swamp Type)(#33763-)
| 15***20 | Nut? Shoe (Y0320-K1) | 410 |
| 20***13 | Track Link Ass'Y,600thgpc200l | 1 |
| 20***43 | Track Shoe Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole)(#20001-33762)
| 13***22 | Link,Track? L.H | 90 |
| 13***32 | Link,Track? R.H | 90 |
| 13***41 | Bushing? Regular | 86 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole)(#33763-)
| 15***20 | Nut? Shoe (Y0320-K1) | 410 |
| 20***13 | Track Link Ass'Y,600thgpc200l | 1 |
| 20***03 | Track Shoe Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Shoe (Triple Grouser)(#20001-33762)
| 13***22 | Link,Track? L.H | 90 |
| 13***32 | Link,Track? R.H | 90 |
| 13***41 | Bushing? Regular | 86 |
Komatsu : Pc200-3(S/N 20001-Up) : Under Carriage : Track Shoe (Triple Grouser)(#33763-)
| 15***20 | Nut? Shoe (Y0320-K1) | 410 |
| 20***12 | Track Link Ass'Y | 1 |
| 20***80 | Track Shoe Ass'Y | 1 |
Work Equipment
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Arm
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Arm (For 40 Feet Long Front)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Arm (For 45 Feet Long Front)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Arm (For 50 Feet Long Front)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Arm (For Magic Arm)
| 01***06 | Seat,(Welded) | 2 |
| 20***80 | Bracket (Welded) | 2 |
| 20***10 | Arm Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom (For 40 Feet Long Front)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom (For 45 Feet Long Front)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom (For 50 Feet Long Front)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom (For Magic Arm)
| 20***22 | Bracket (Welded) | 2 |
| 20***71 | Bracket (Welded) | 2 |
| 20***10 | Boom | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom Cylinder (For 40 Feet Long Front)(#20001-35302)
| 01***45 | Screw | 4 |
| 01***55 | Bolt,(10m) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom Cylinder (For 40 Feet Long Front)(#35303-)
| 01***45 | Screw | 4 |
| 01***55 | Bolt,(10m) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom Cylinder (For 45 Feet Long Front)
| 01***45 | Screw | 4 |
| 01***55 | Bolt,(10m) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom Cylinder (For 50 Feet Long Front)(#20001-35302)
| 01***45 | Screw | 4 |
| 01***55 | Bolt,(10m) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Boom Cylinder (For 50 Feet Long Front)(#35303-)
| 01***45 | Screw | 4 |
| 01***55 | Bolt,(10m) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket Cylinder (For 1.8m Short Arm) (#20001-..)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***55 | Bolt,(Not Used For Chip Dozer) | 12 |
| 01***10 | Bolt,(Noise Suppression Spec.) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket Cylinder (For 1.8m Short Arm)(#..-)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***60 | Capscrew | 12 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket Cylinder (For 40feet Long Front)
| 01***50 | Bolt (Kit) | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket Cylinder (For 45 Feet Long Front)
| 01***50 | Bolt (Kit) | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket Cylinder (For 50 Feet Long Front)
| 01***50 | Bolt (Kit) | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket Cylinder (For Magic Arm)
| 01***09 | Nut,(With Body Positioner) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
| 07***55 | O-Ring,(F4350-62a1 -14 ) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.07m3? Width 550mm (For Magic Arm)
| 01***50 | Capscrew | 8 |
| 01***13 | Nut,Plate (Welded) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 16 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.33m3 Width 560mm(#20001-23900)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***90 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.33m3 Width 560mm(#23901-)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***61 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.33m3 Width 560mm? Horizontal Pin Type
| 01***30 | Nut | 8 |
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 3 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.33m3 Width 700mm (For 50feet Long Front)
| 01***40 | Bolt | 1 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
| 01***62 | Bolt | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.40m3? Width 825mm (For 40feet Long Front)
| 01***70 | Bolt,(With Wear Guard) | 4 |
| 01***70 | Bolt | 1 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.45m3 Width 750mm(#20001-22041)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***90 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.45m3 Width 750mm(#22042-)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***61 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.45m3 Width 750mm? Horizontal Pin Type
| 01***30 | Nut | 8 |
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 3 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.45m3 Width 750mm? With Hook (Except Japan)(#20001-22041)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***90 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.45m3 Width 750mm? With Hook (Except Japan)(#22042-)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***70 | Hook (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.45m3? Width 850mm (For 40feet Long Front)(#20001-26106)
| 01***70 | Bolt,(With Wear Guard) | 4 |
| 01***70 | Bolt | 1 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.45m3? Width 850mm (For 40feet Long Front)(#26107-)
| 01***70 | Bolt,(With Wear Guard) | 4 |
| 01***70 | Bolt | 1 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.7m3? Width 1045mm(#20001-22111)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.7m3? Width 1045mm(#22112-33130)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.7m3? Width 1045mm(#33131-)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.7m3? Width 1045mm? Horizontal Pin Type(#20001-33130)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.7m3? Width 1045mm? Horizontal Pin Type(#33131-)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.7m3? Width 1045mm? With Hook (Except Japan)(#20001-22111)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.7m3? Width 1045mm? With Hook (Except Japan)(#22112-33130)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.7m3? Width 1045mm? With Hook (Except Japan)(#33131-)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.8m3 Width 1200mm(#20001-22111)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.8m3 Width 1200mm(#22112-33130)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.8m3 Width 1200mm(#33131-)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.8m3 Width 1200mm? Horizontal Pin Type(#20001-33130)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.8m3 Width 1200mm? Horizontal Pin Type(#33131-)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.8m3 Width 1200mm? With Hook (Except Japan)(#20001-33130)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.8m3 Width 1200mm? With Hook (Except Japan)(#33131-)
| 01***55 | Bolt,(With Hook) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***30 | Nut | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm(#20001-23760)
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm(#23761-33130)
| 20***61 | Adapter (Welded) | 6 |
| 20***71 | Tooth | 6 |
| 20***72 | Tooth | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm(#33131-)
| 20***72 | Tooth | 6 |
| 20***81 | Pin | 6 |
| 20***91 | Lock | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm? Horizontal Pin Type(#20001-33130)
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 20***70 | Tooth | 6 |
| 20***20 | Plate (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm? Horizontal Pin Type(#33131-)
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 20***70 | Tooth | 6 |
| 20***31 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm? With Hook (Except Japan)(#20001-23760)
| 20***70 | Hook (Welded) | 1 |
| 20***90 | Bolt | 1 |
| 20***61 | Adapter (Welded) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm? With Hook (Except Japan)(#23761-33130)
| 20***70 | Hook (Welded) | 1 |
| 20***61 | Adapter (Welded) | 6 |
| 20***71 | Tooth | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm? With Hook (Except Japan)(#33131-)
| 20***70 | Hook (Welded) | 1 |
| 20***72 | Tooth | 6 |
| 20***81 | Pin | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm? With Side Cutter (Horizontal Pin Type) (Except Japan)(#20001-33130)
| 01***30 | Nut | 8 |
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm? With Side Cutter (Horizontal Pin Type) (Except Japan)(#33131-)
| 01***30 | Nut | 8 |
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm? With Side Cutter(#20001-33130)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***61 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 0.9m3? Width 1330mm? With Side Cutter(#33131-)
| 01***30 | Nut | 8 |
| 17***10 | Bolt? Shoe,Bolt (Y0320-K1) | 8 |
| 20***80 | Cutter,(L.H.) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 1.0m3 Width 1450mm
| 20***61 | Adapter (Welded) | 6 |
| 20***71 | Tooth | 6 |
| 20***72 | Tooth | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 1.0m3 Width 1450mm? Horizontal Pin Type
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 20***70 | Tooth | 6 |
| 20***30 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 1.2m3 Width 1680mm? Horizontal Pin Type
| 09***96 | Pin, Mount Center Teeth (Tip Type) | 6 |
| 20***70 | Tooth | 6 |
| 20***30 | Plate,L.H. (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Bucket? 1.2m3? Width 1680mm
| 20***61 | Adapter (Welded) | 6 |
| 20***71 | Tooth | 6 |
| 20***72 | Tooth | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Clamshell Bucket? 0.6m3? Digging Type
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 4 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Clamshell Bucket? 0.6m3? Loading Type
| 01***20 | Bolt,(Large Capacity Type) (Std) | 10 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 2 |
| 01***50 | Screw | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Clamshell Piping
| 01***50 | Bolt - Torque Converter Totransmission Mounting | 6 |
| 01***20 | Bolt, Adapter Mounting | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Control Lever And Linkage (1/2) (For Magic Arm)
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***05 | Nut,L.H. Thread (D31s) | 1 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Control Lever And Linkage (2/2) (For Magic Arm)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Control Pedal And Linkage (For Magic Arm)
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***40 | Bolt | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Control Valve (For 40 Feet Long Front)
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 1 |
| 70***50 | Spring | 1 |
| 70***00 | Safety Valve Ass'Y | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Control Valve (For 45 Feet Long Front)
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 1 |
| 70***50 | Spring | 1 |
| 70***00 | Safety Valve Ass'Y | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Control Valve (For 50 Feet Long Front)
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 1 |
| 70***50 | Spring | 1 |
| 70***00 | Safety Valve Ass'Y | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Ditch Cleaning Bucket (For 40 Feet Long Front) : Unit_01_of_02
| 01***40 | Bolt | 1 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
| 20***80 | Tooth | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Ditch Cleaning Bucket (For 40 Feet Long Front) : Unit_02_of_02
| 01***40 | Bolt | 1 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
| 20***10 | Bucket | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Ditch Cleaning Bucket? 0.35m3 (For 50 Feet Long Front)
| 01***40 | Bolt | 1 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
| 20***80 | Tooth | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Ditch Cleaning Bucket? 0.4m3 (For 50 Feet Long Front)
| 01***40 | Bolt | 1 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
| 20***10 | Bucket | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Ditch Cleaning Bucket? 0.6m3 (For 45 Feet Long Front)
| 01***70 | Bolt,(With Wear Guard) | 4 |
| 01***70 | Bolt | 1 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Ditch Cleaning Bucket? 0.7m3 Width 1800mm
| 20***20 | Plate (Welded) | 1 |
| 20***30 | Plate,(L.H.) (Welded) | 1 |
| 20***40 | Plate,(R.H.) (Welded) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Electrical System (Wiring) (For Magic Arm)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Extension Arm
| 01***16 | Nut - M20 | 6 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 5 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Heavy Duty Bucket? 0.7m3 Width 1045mm
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (1/2) (Extension Arm Cylinder Line) (For Magic Arm)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (1/3) (Bucket Cylinder Line) (For Magic Arm)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 1 |
| 01***65 | Bolt, Mount Radiator To Frame (Bottom) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (2/2) (Extension Arm Cylinder Line) (For Magic Arm)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***50 | Bolt,(For Strengthened Cover) | 4 |
| 01***75 | Bolt, Tube Mounting | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (2/3) (Bucket Cylinder Line) (For Magic Arm)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***50 | Bolt,(For Strengthened Cover) | 4 |
| 01***75 | Bolt, Tube Mounting | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (3/3) (Bucket Cylinder Line) (For Magic Arm)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 5 |
| 01***75 | Bolt, Tube Mounting | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Boom And Arm Cylinder Line) (Attachment Side) (For 40 Feet Long Front)
| 01***30 | Bolt,(For Mechanical Governor) | 48 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Boom And Arm Cylinder Line) (Attachment Side) (50 Feet Long Front)
| 01***30 | Bolt,(For Mechanical Governor) | 48 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Boom And Arm Cylinder Line) (Attachment Side) (For 45 Feet Long Front)
| 01***30 | Bolt,(For Mechanical Governor) | 48 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Bucket Cylinder Line) (1/2) (Attachment Side) (For 40 Feet Long Front)
| 01***30 | Bolt,(For Mechanical Governor) | 24 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 16 |
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Bucket Cylinder Line) (1/2) (Attachment Side) (For 45 Feet Long Front)
| 01***30 | Bolt,(For Mechanical Governor) | 24 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 20 |
| 01***32 | Washer,(With Auto Emergency Steering) | 20 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Bucket Cylinder Line) (1/2) (Attachment Side) (For 50 Feet Long Front)
| 01***30 | Bolt,(For Mechanical Governor) | 24 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 20 |
| 01***32 | Washer,(With Auto Emergency Steering) | 20 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Bucket Cylinder Line) (2/2) (Attachment Side) (For 40 Feet Long Front)
| 01***30 | Bolt,(For Mechanical Governor) | 32 |
| 01***75 | Bolt,(For Shipping) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Bucket Cylinder Line) (2/2) (Attachment Side) (For 45 Feet Long Front)
| 01***30 | Bolt,(For Mechanical Governor) | 32 |
| 01***75 | Bolt,(For Shipping) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Bucket Cylinder Line) (2/2) (Attachment Side) (For 50 Feet Long Front)
| 01***30 | Bolt,(For Mechanical Governor) | 32 |
| 01***75 | Bolt,(For Shipping) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Bucket Cylinder Line) (Chassis Side) (For Magic Arm)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***11 | Nut,(With Under Mirror) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Extension Arm Cylinder Line) (Chassis Side) (For Magic Arm)
| 01***30 | Bolt,(For Mechanical Governor) | 8 |
| 01***40 | Bolt,(With Service Valve R.H.) | 8 |
| 01***11 | Nut,(With Under Mirror) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Pump To Valve) (For Magic Arm)
| 01***30 | Bolt,(For Mechanical Governor) | 12 |
| 01***70 | Bolt (Op) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Hydraulic Piping (Return) (For Magic Arm)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Link
| 01***16 | Nut - M20 | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Link (For 40 Feet Long Front)
| 01***40 | Bolt | 1 |
| 01***20 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Link (For 45 Feet Long Front)
| 01***40 | Bolt | 1 |
| 01***20 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Link (For 50 Feet Long Front)
| 01***40 | Bolt | 1 |
| 01***20 | Bolt | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 6 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Long Life Tooth
| 20***10 | Tooth | 0 |
| (2***1) | Pin | 0 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Long Life Tooth? Horizontl Pin Type
| 20***60 | Tooth,(For Long Life) | 0 |
| (0***6) | Pin | 0 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Machinery Compartment (1/2)
| 20***51 | Sheet | 1 |
| 20***00 | Door | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Machinery Compartment (2/2)
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Magic Arm (1/4)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***55 | Bolt,(With Hook) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Magic Arm (2/4)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***46 | Nut | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Magic Arm (3/4)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***46 | Nut | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Magic Arm (4/4)
| 01***75 | Bolt,(For Adjusting) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 1 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Magic Arm Cylinder
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Bolt,(Shim Thickness?Less Than 8mm) | 8 |
| 01***09 | Nut,(With Body Positioner) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Marks And Plates (For Magic Arm)
| 20***10 | Plate? Caution | 1 |
| 20***10 | Cover | 1 |
| 20***20 | Plate | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : O.L.S.S. Piping (For Magic Arm)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***50 | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : P.P.C. Valve (For Magic Arm)
| 07***20 | O-Ring,Relief Valve | 4 |
| 07***12 | Plug,Taper | 2 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Pilot Piping (1/2) (For Magic Arm)
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 4 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 4 |
| 07***34 | O-Ring,(Not Used When (B) Spec.) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Pilot Piping (2/2) (For Magic Arm)
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 4 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 6 |
| 07***06 | Hose,(See Fig.6531-14) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Revolving Frame And Floor Frame (For Magic Arm)
| 01***19 | Seat,(Welded To Revolving Frame) | 2 |
| 01***25 | Seat (Welded) | 2 |
| 01***07 | Boss, Fuel Tank | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Ripper Bucket? 0.56m3 Width 950mm
| 09***08 | Pin,(Without Pin Puller) | 3 |
| 17***30 | Point,(For Multi Ripper) | 3 |
| 20***90 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Self-Sharp Tooth
| 20***20 | Tooth | 0 |
| (2***1) | Pin | 0 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Self-Sharp Tooth? Horizontal Pin Type
| 20***30 | Tooth | 0 |
| (0***6) | Pin | 0 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Short Arm? 2400mm
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| 07***00 | Fitting, Grease (Steering Cylinder) | 1 |
| 07***90 | Seal,Dust (Kit) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Single Shank Ripper
| 09***08 | Pin,(Without Pin Puller) | 1 |
| 17***30 | Point,(For Multi Ripper) | 1 |
| 20***90 | Bolt | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Slope Finishing Bucket
| 20***90 | Bolt | 1 |
| 20***10 | Collar | 2 |
| 20***10 | Bucket,Slope Finishing | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Super Short Arm
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| 07***00 | Fitting, Grease (Steering Cylinder) | 1 |
| 07***90 | Seal,Dust (Kit) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Three Shank Ripper
| 01***05 | Bolt | 3 |
| 01***10 | Nut,(Without Air Conditioner) | 6 |
| 09***89 | Pin | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Trapezoidal Bucket
| 01***70 | Bolt, Mount Fuel Tank - Rear | 12 |
| 01***19 | Nut | 12 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Travel Control Lever And Linkage (1/2) (With Auto Deceleration) (For Magic Arm)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Travel Control Lever And Linkage (2/2) (With Auto Deceleration) (For Magic Arm)
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Two Piece Boom (1/4)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 18 |
| 01***40 | Bolt,(With Center Guard) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 18 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Two Piece Boom (2/4)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 14 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 14 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Two Piece Boom (3/4)
| 01***30 | Bolt,(For Mechanical Governor) | 56 |
| 01***75 | Bolt,(For Adjusting) | 5 |
| 01***80 | Bolt,(Not Shown) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment : Two Piece Boom (4/4)
| 01***30 | Bolt,(For Mechanical Governor) | 48 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 14 |
| 01***32 | Washer,(With Auto Emergency Steering) | 14 |
Work Equipment Control System
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Arm Cylinder(#20001-35302)
| 01***45 | Screw | 2 |
| 01***55 | Bolt,(10m) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Arm Cylinder(#35303-)
| 01***45 | Screw | 2 |
| 01***55 | Bolt,(10m) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Boom Cylinder(#20001-35302)
| 01***45 | Screw | 4 |
| 01***55 | Bolt,(10m) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Boom Cylinder(#35303-)
| 01***45 | Screw | 4 |
| 01***55 | Bolt,(10m) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Bucket Cylinder(#20001-35302)
| 01***45 | Screw | 2 |
| 01***55 | Bolt,(10m) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Bucket Cylinder(#35303-)
| 01***45 | Screw | 2 |
| 01***55 | Bolt,(10m) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Check Valve? L.H.
| 04***93 | Ball,Steel | 2 |
| 07***07 | O-Ring - (K10) | 2 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Check Valve? R.H.
| 04***93 | Ball,Steel | 2 |
| 07***07 | O-Ring - (K10) | 3 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (1/7) (For Long Lever Control)(#20001-25160)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***55 | Bolt,(10m) | 4 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (1/7) (For Long Lever Control)(#25161-)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***55 | Bolt,(10m) | 4 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (1/7) (For Wrist Control)(#20001-25160)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***55 | Bolt,(10m) | 4 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (1/7) (For Wrist Control)(#25161-)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***55 | Bolt,(10m) | 4 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (2/7) (For Long Lever Control)(#20001-25160)
| 01***12 | Bolt | 6 |
| 01***20 | Bolt, Mount Spool Covers | 10 |
| 01***25 | Bolt | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (2/7) (For Long Lever Control)(#25161-)
| 01***12 | Bolt | 3 |
| 01***20 | Bolt, Mount Spool Covers | 18 |
| 01***25 | Bolt | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (2/7) (For Wrist Control)(#20001-25160)
| 01***12 | Bolt | 3 |
| 01***20 | Bolt, Mount Spool Covers | 14 |
| 01***25 | Bolt | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (2/7) (For Wrist Control)(#25161-)
| 01***12 | Bolt | 3 |
| 01***20 | Bolt, Mount Spool Covers | 18 |
| 01***25 | Bolt | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (3/7) (For Long Lever Control)(#20001-25160)
| 07***10 | O-Ring,Plate | 1 |
| 07***21 | O-Ring (Kit) | 1 |
| 07***10 | Ring,Back-Up | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (3/7) (For Long Lever Control)(#25161-)
| 07***10 | O-Ring,Plate | 1 |
| 07***21 | O-Ring (Kit) | 1 |
| 07***10 | Ring,Back-Up | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (3/7) (For Wrist Control)(#20001-25160)
| 07***10 | O-Ring,Plate | 1 |
| 07***21 | O-Ring (Kit) | 1 |
| 07***10 | Ring,Back-Up | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (3/7) (For Wrist Control)(#25161-)
| 07***10 | O-Ring,Plate | 1 |
| 07***21 | O-Ring (Kit) | 1 |
| 07***10 | Ring,Back-Up | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (4/7) (For Long Lever Control)(#20001-25160)
| 01***12 | Bolt | 2 |
| 01***16 | Bolt | 1 |
| 01***20 | Bolt, Mount Spool Covers | 11 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (4/7) (For Long Lever Control)(#25161-)
| 01***12 | Bolt | 2 |
| 01***16 | Bolt | 1 |
| 01***20 | Bolt, Mount Spool Covers | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (4/7) (For Wrist Control)(#20001-25160)
| 01***12 | Bolt | 2 |
| 01***16 | Bolt | 1 |
| 01***20 | Bolt, Mount Spool Covers | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (4/7) (For Wrist Control)(#25161-)
| 01***12 | Bolt | 2 |
| 01***16 | Bolt | 1 |
| 01***20 | Bolt, Mount Spool Covers | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (5/7) (For Long Lever Control)(#20001-25160)
| 07***23 | O-Ring,(F2320-62a0 -18 ) | 2 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 2 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (5/7) (For Long Lever Control)(#25161-)
| 07***38 | O-Ring, (Without Emergency Steering) | 1 |
| 07***23 | O-Ring,(F2320-62a0 -18 ) | 2 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (5/7) (For Wrist Control)(#20001-25160)
| 07***23 | O-Ring,(F2320-62a0 -18 ) | 2 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 2 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (5/7) (For Wrist Control)(#25161-)
| 07***38 | O-Ring, (Without Emergency Steering) | 1 |
| 07***23 | O-Ring,(F2320-62a0 -18 ) | 2 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (6/7) (For Long Lever Control)(#20001-25160)
| 01***11 | Nut - Mounting | 2 |
| 07***11 | O-Ring (Kit) | 2 |
| 07***12 | O-Ring (Itl) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (6/7) (For Long Lever Control)(#25161-)
| 01***11 | Nut - Mounting | 2 |
| 07***11 | O-Ring (Kit) | 2 |
| 07***12 | O-Ring (Itl) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (6/7) (For Wrist Control)(#20001-25160)
| 01***11 | Nut - Mounting | 2 |
| 07***11 | O-Ring (Kit) | 2 |
| 07***12 | O-Ring (Itl) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (6/7) (For Wrist Control)(#25161-)
| 01***11 | Nut - Mounting | 2 |
| 07***11 | O-Ring (Kit) | 2 |
| 07***12 | O-Ring (Itl) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (7/7) (For Long Lever Control)(#20001-25160)
| 07***14 | O-Ring,(F4350-63a1a-2 ) | 1 |
| 07***12 | O-Ring, Divider Valve Mounting | 1 |
| 07***12 | Ring,Back-Up; Was 07001-02012, Ring,Back-Up (Itl) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (7/7) (For Long Lever Control)(#25161-)
| 07***14 | O-Ring,(F4350-63a1a-2 ) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (7/7) (For Wrist Control)(#20001-25160)
| 07***14 | O-Ring,(F4350-63a1a-2 ) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Control Valve (7/7) (For Wrist Control)(#25161-)
| 07***14 | O-Ring,(F4350-63a1a-2 ) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Cut Off And Negative Control Valve? Front (With 2-Stage Selector Mode Olss)(#.-)
| 07***23 | O-Ring,(F4320-61a0 -29 ) | 1 |
| 07***07 | Plug,Housing No.2?3?4?5?6 | 1 |
| 70***84 | Pump Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Cut Off And Negative Control Valve? Front (With 2-Stage Selector Mode Olss)(#20001-.)
| (****0) | Cover | 1 |
| (****9) | Washer, Spring | 10 |
| (7***0) | Valve Ass'Y,Co And Nc | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Cut Off And Negative Control Valve? Front (With 3-Stage Selector Mode Olss)(#.-)
| 07***23 | O-Ring,(F4320-61a0 -29 ) | 1 |
| 07***07 | Plug,Housing No.2?3?4?5?6 | 1 |
| 70***11 | Valve Ass'Y,Co And Nc | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Cut Off And Negative Control Valve? Front (With 3-Stage Selector Mode Olss)(#20001-.)
| 70***11 | Valve Ass'Y,Co And Nc | 1 |
| (****0) | Cover | 1 |
| (****9) | Washer, Spring | 10 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Cut Off And Negative Control Valve? Rear (With 2-Stage Selector Mode Olss)(#.-)
| 70***32 | Servo Valve Ass'Y,Rear | 1 |
| 70***31 | Valve Ass'Y,Co And Nc | 1 |
| 70***00 | Valve Ass'Y,Co And Nc | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Cut Off And Negative Control Valve? Rear (With 3-Stage Selector Mode Olss)(#.-)
| 70***11 | Valve Ass'Y,Co And Nc | 1 |
| (7***2) | Servo Valve Ass'Y,Rear | 1 |
| (****2) | Body Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Cut Off And Negative Control Valve? Rear (With 3-Stage Selector Mode Olss)(#20001-.)
| 70***11 | Valve Ass'Y,Co And Nc | 1 |
| (7***2) | Servo Valve Ass'Y,Rear | 1 |
| (****0) | Cover | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Cut Off And Negative Control Valve? Rear (Withb 2-Stage Selector Mode Olss)(#20001-.)
| 70***31 | Valve Ass'Y,Co And Nc | 1 |
| (****0) | Cover | 1 |
| (7***2) | Servo Valve Ass'Y,Rear | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Gear Pump (With 2-Stage Selector Mode Olss)(#20001-26987)
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***20 | Pin,Dowel (Welded) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Gear Pump (With 2-Stage Selector Mode Olss)(#26988-)
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***20 | Pin,Dowel (Welded) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Gear Pump (With 3-Stage Selector Mode Olss)(#20001-26987)
| 07***12 | Plug,Taper | 1 |
| 70***01 | Pump Ass'Y (Bar 25) | 1 |
| 70***10 | O-Ring | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Gear Pump (With 3-Stage Selector Mode Olss)(#26988-)
| 07***12 | Plug,Taper | 1 |
| 70***01 | Pump Ass'Y (Bar 25) | 1 |
| 70***02 | Pump Ass'Y,(704-24-28203? 704-28-02710) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Oil Tank(#20001-26573)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***75 | Bolt,(For Adjusting) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Oil Tank(#26574-)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***35 | Bolt, Hydraulic Tank Mounting | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Arm? Bucket Cylinder Line) (Chassis Side)(#20001-24683)
| 01***30 | Bolt,(For Mechanical Governor) | 24 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Arm? Bucket Cylinder Line) (Chassis Side)(#24684-26573)
| 01***30 | Bolt,(For Mechanical Governor) | 24 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Arm? Bucket Cylinder Line) (Chassis Side)(#26574-)
| 01***30 | Bolt,(For Mechanical Governor) | 24 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Boom And Arm Cylinder Line)
| 01***30 | Bolt,(For Mechanical Governor) | 48 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Boom Cylinder Line) (Chassis Side)
| 01***30 | Bolt,(For Mechanical Governor) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***11 | Nut,(With Under Mirror) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Bucket Cylinder Line)
| 01***30 | Bolt,(For Mechanical Governor) | 40 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Long Lever Control)(#20001-20949)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Long Lever Control)(#20950-21038)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Long Lever Control)(#21039-21118)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Long Lever Control)(#21119-21536)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Long Lever Control)(#21537-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 3 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Wrist Control)(#20001-20949)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Wrist Control)(#20950-21038)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Wrist Control)(#21039-21118)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Wrist Control)(#21119-21536)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Drain) (For Wrist Control)(#21537-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Pump To Control Valve)
| 01***30 | Bolt,(For Mechanical Governor) | 16 |
| 01***23 | Washer,(For Shipping) | 16 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler) (With Auto Deceleration) (With Swing Mechanical Brake)(#24676-26573)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler) (With Auto Deceleration) (With Swing Mechanical Brake)(#26574-36207)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 2 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler) (With Auto Deceleration) (With Swing Mechanical Brake)(#36208-)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 2 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler) (With Auto Dedeleration) (With Swing Mechanical Brake)(#20001-20739)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler) (With Auto Dedeleration) (With Swing Mechanical Brake)(#20740-24675)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler)(Without Auto Deceleration)(Without Swing Mechanical Brake)(#20001-20739)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler)(Without Auto Deceleration)(Without Swing Mechanical Brake)(#20740-24675)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler)(Without Auto Deceleration)(Without Swing Mechanical Brake)(#24676-26573)
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler)(Without Auto Deceleration)(Without Swing Mechanical Brake)(#26574-36207)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 2 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return And Oil Cooler)(Without Auto Deceleration)(Without Swing Mechanical Brake)(#36208-)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 2 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return)(#20001-20739)
| 01***60 | Bolt, Tube To Oil Cooler | 2 |
| 01***70 | Bolt, Accumulator Mounting Bracket | 2 |
| 01***11 | Nut,(With Under Mirror) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return)(#20740-24675)
| 01***60 | Bolt, Tube To Oil Cooler | 2 |
| 01***70 | Bolt, Accumulator Mounting Bracket | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Return)(#24676-)
| 01***65 | Bolt, Mount Radiator To Frame (Bottom) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***45 | O-Ring,Without Revolution Sensor | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Tank To Pump)(#20001-36207)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 10 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piping (Tank To Pump)(#36208-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 10 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (1/4) (With 2-Stage Selector Mode Olss)(#20001-26987)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***60 | Bolt, Trunnion Cap | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (1/4) (With 2-Stage Selector Mode Olss)(#26988-)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***60 | Bolt, Trunnion Cap | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (1/4) (With 3-Stage Selector Mode Olss)(#20001-26987)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***60 | Bolt, Trunnion Cap | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (1/4) (With 3-Stage Selector Mode Olss)(#26988-)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***60 | Bolt, Trunnion Cap | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (2/4) (With 2-Stage Selector Mode Olss)(#20001-26987)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 07***80 | O-Ring,Hydraulic Oil Filter | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (2/4) (With 2-Stage Selector Mode Olss)(#26988-)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***35 | Screw | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (2/4) (With 3-Stage Selector Mode Olss)(#20001-26987)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 07***80 | O-Ring,Hydraulic Oil Filter | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (2/4) (With 3-Stage Selector Mode Olss)(#26988-)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***35 | Screw | 8 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (3/4) (With 2-Stage Selector Mode Olss)(#20001-26987)
| (7***0) | Pump Sub Ass'Y | 1 |
| (7***4) | Pump Ass'Y | 1 |
| (7***0) | Hydraulic Pump Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (3/4) (With 2-Stage Selector Mode Olss)(#26988-)
| (****2) | Impeller | 1 |
| (****5) | Washer | 8 |
| (****0) | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (3/4) (With 3-Stage Selector Mode Olss)(#20001-26987)
| (7***0) | Pump Sub Ass'Y | 1 |
| (****0) | Shim Kit | 2 |
| (****0) | Boss | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (3/4) (With 3-Stage Selector Mode Olss)(#26988-)
| (****2) | Impeller | 1 |
| (****5) | Washer | 8 |
| (****0) | Screw | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (4/4) (With 2-Stage Selector Mode Olss)(#20001-26987)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 07***65 | O-Ring,Injection Pump Case | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (4/4) (With 2-Stage Selector Mode Olss)(#26988-)
| 01***35 | Screw | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 07***65 | O-Ring,Injection Pump Case | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (4/4) (With 3-Stage Selector Mode Olss)(#20001-26987)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 07***65 | O-Ring,Injection Pump Case | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Hydraulic Piston Pump (4/4) (With 3-Stage Selector Mode Olss)(#26988-)
| 01***35 | Screw | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 07***65 | O-Ring,Injection Pump Case | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : P.P.C. Valve (For Long Lever Control)
| 04***12 | Pin, Spring | 2 |
| 07***20 | O-Ring,Relief Valve | 4 |
| 07***12 | Plug,Taper | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : P.P.C. Valve (For Wrist Control)
| 04***12 | Pin, Spring | 2 |
| 07***20 | O-Ring,Relief Valve | 4 |
| 07***12 | Plug,Taper | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Relief Valve (With 2-Stage Selector Mode Olss)(#20001-26987)
| 01***08 | Nut (Op) | 1 |
| 07***11 | O-Ring (Kit) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Relief Valve (With 2-Stage Selector Mode Olss)(#26988-)
| 07***10 | O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010 | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 70***10 | O-Ring (Kit) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Relief Valve (With 3-Stage Selector Mode Olss)(#20001-26987)
| 01***08 | Nut (Op) | 1 |
| 07***11 | O-Ring (Kit) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Relief Valve (With 3-Stage Selector Mode Olss)(#26988-)
| 07***10 | O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010 | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 70***10 | O-Ring (Kit) | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Servo Valve(#20001-24683)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***35 | Bolt,(For Position Fixing) | 2 |
| 07***28 | O-Ring, Strainer To Control Pump Line | 2 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Servo Valve? Front (1/2) (With 2-Stage Selector Mode Olss)
| 01***35 | Bolt | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
| 07***11 | O-Ring (Kit) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Servo Valve? Front (1/2) (With 3-Stage Selector Mode Olss)
| 01***35 | Bolt | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
| 07***11 | O-Ring (Kit) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Servo Valve? Front (2/2) (With 2-Stage Selector Mode Olss)
| 70***31 | Servo Valve Ass'Y,Front | 1 |
| 70***00 | Valve Sub Ass'Y | 1 |
| (****3) | O-Ring | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Servo Valve? Front (2/2) (With 3-Stage Selector Mode Olss)
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Servo Valve? Rear (1/2) (With 2-Stage Selector Mode Olss)
| 01***50 | Bolt | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
| 07***11 | O-Ring (Kit) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Servo Valve? Rear (1/2) (With 3-Stage Selector Mode Olss)
| 01***50 | Bolt | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
| 07***11 | O-Ring (Kit) | 4 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Servo Valve? Rear (2/2) (With 2-Stage Selector Mode Olss)
| 70***32 | Servo Valve Ass'Y,Rear | 1 |
| 70***00 | Valve Sub Ass'Y | 1 |
| (****3) | O-Ring | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Servo Valve? Rear (2/2) (With 3-Stage Selector Mode Olss)
| 70***12 | Servo Valve Ass'Y,Rear | 1 |
| 70***00 | Valve Ass'Y | 1 |
| (****0) | Plug | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Torque Variable Control Valve (With 2-Stage Selector Mode Olss)
| 07***16 | O-Ring,Water Pump | 1 |
| 70***20 | Solenoid Ass'Y | 1 |
| 70***21 | Solenoid Ass'Y | 1 |
Komatsu : Pc200-3(S/N 20001-Up) : Work Equipment Control System : Torque Variable Control Valve (With 3-Stage Selector Mode Olss)
| 07***16 | O-Ring,Water Pump | 1 |
| 70***20 | Solenoid Ass'Y | 1 |
| 70***21 | Solenoid Ass'Y | 1 |
PC200-3(S/N 20001-UP) serial number reference
On this generation the PIN/serial plate is riveted to the machine's lower frame near the cab area; a stamped serial also appears on the front frame between the boom foot pivots, often under a small KOMATSU decal — this second location is the more consistently documented one, so check it if the cab-area plate is missing or unreadable. Read it as the model name (PC200-3 or PC200LC-3) followed directly by a plain 5-digit running serial number, with no 3-letter alpha prefix in front of it like later Komatsu or other-brand PIN formats use. The number that identifies this production block is 20001 and up.
| Prefix | Identifies | Notes |
|---|---|---|
| 20001-UP | PC200-3 (standard-gauge undercarriage) | Base hydraulic excavator in this generation, standard track gauge/undercarriage. Fitted with the S6D105-B-1A turbocharged diesel; factory parts documentation ties engine serials from roughly 61481-up to this machine serial block. Production window is approximately 1986-1989. No letter prefix precedes the serial in this generation — it runs as the model name plus a plain 5-digit number starting at 20001. Plant/region is not stated in documentation checked. |
| 20001-UP | PC200LC-3 (long-carriage undercarriage) | Long-carriage (LC) undercarriage version of the same base machine, sharing the identical 20001-up serial run and the same S6D105-B-1A engine (serials from roughly 61481-up) as the standard PC200-3. Longer track base than the standard-gauge unit for added stability and lift capacity on soft or uneven ground; same track width. Same approximate 1986-1989 production window as the standard-gauge unit. One isolated owner reference places a unit from this serial run earlier than the documented window — if working near the low end of this range, confirm build year against the machine's own PIN with your dealer rather than assuming. |
Frequently asked questions
What engine powers the Komatsu PC200-3 (S/N 20001-up)?
It uses a Komatsu S6D105-1 diesel — a 6-cylinder, water-cooled, turbocharged, direct-injection engine displacing around 6.5 liters and rated near 88 kW (about 118-120 HP, figures vary by source) at 2100-2150 rpm.
What is the operating weight of the PC200-3 (S/N 20001-up)?
Operating weight runs roughly 18.4 to 19.5 tonnes (about 40,600-43,000 lb), depending on whether the machine has the standard undercarriage or the wider, longer PC200LC-3 carriage, plus the bucket and arm/boom combination fitted.
What replaced the Komatsu PC200-3?
The Komatsu PC200-5 (S/N 45001-up) replaced it, arriving around 1989 with updated load-sensing hydraulics. Komatsu skipped a "-4" model designation entirely between the -3 and -5 series.
What PC200-3(S/N 20001-UP) owners discuss
What engine does the PC200-3 (S/N 20001-up) actually run, and is there anything unusual about it?
This serial range uses the Komatsu 6D105-1, badged S6D105-1 on some documentation, a turbocharged direct-injection inline-six diesel with roughly 105 mm x 125 mm (4.13 in x 4.92 in) bore and stroke. Gross flywheel output is generally documented in the mid-80s to low-90s kW range (roughly 115-125 hp); treat the exact figure as a range since published numbers vary by source and by which rating standard was used. One quirk worth knowing on this engine family: a leaking rear crankshaft seal lets oil collect inside the damper/pulley housing, and that trapped oil runs hot and can cook a nearby sensor or connector. If a sensor in that area keeps failing, check for an oil-soaked damper housing before you keep replacing parts.
Hydraulics feel weak or sluggish under load. Where do experienced owners say to start?
The consensus is that weak hydraulics almost always means the system is losing pressure somewhere internally, not that the pump has simply worn out. Work in this order: confirm oil level, filter condition, and suction strainer condition first, then check system pressure both cold and hot under load, then isolate which function loses power first. If one function is weak while others stay strong (boom weak, swing fine, for example), that points at the main control valve rather than the pump. A cylinder that drifts under load with no visible external leak points at worn piston seals bypassing internally, and a relief valve opening too early will rob every function equally. On machines this age, chunks of brass or bronze material in the suction strainer is the classic sign of a pump nearing the end of its life, but pull and test pressures before condemning the pump itself. This kind of diagnosis means running the system under full load and probing pressure ports on live circuits, so have your dealer or a qualified hydraulics tech verify readings before you open any fitting under pressure.
The machine keeps running hot. What's the usual root cause on this generation of PC200?
Overheating on these older PC200 machines is more often an airflow problem than a cooling-capacity problem. The radiator and hydraulic oil cooler sit side by side, and the foam seals between them, underneath the radiator pack, and between the radiator and the engine cover break down or go missing over time. Once that sealing is gone, incoming air bypasses the cores instead of pulling through the fins, and dirt collects in the gap between the two coolers where it's hard to see or reach. Owners report pulling the cooler pack, cleaning both faces thoroughly, and replacing all the foam seals as the fix that actually sticks, rather than repeated flushes or thermostat swaps. Also check the valve that diverts oil through the hydraulic cooler, since a stuck valve upsets both cooling circuits at once. Let the system cool fully before opening any cap or fitting, since a hot, pressurized cooling system can cause serious burns.
Turn the key and nothing happens at all, no click, no lights. What do owners check first?
On the PC200-3, this is most often traced to the battery disconnect switch mounted under the boom foot on the frame, on the battery side of the machine. It corrodes internally and stops passing current even though it looks fine from the outside. Tapping the top of the switch can sometimes free a stuck contact long enough to confirm that's the cause, and disassembling and cleaning the contacts is the usual permanent fix. After that, check the fuses on the console panel on the right side of the cab, and check the key switch wiring for corroded connections. The starter relay is what actually fires the starter solenoid, so briefly jumping it is a valid way to isolate a bad relay from a bad switch or bad wiring. Because this involves the battery and starter circuit, have your dealer verify any jumper testing and make sure nothing is left bridged before you put the machine back to work.
What undercarriage wear should I expect to find on a PC200-3 this age?
Watch for oil weeping from behind the sprocket or dripping onto the tracks. That usually means a failed duo-cone seal at the final drive output shaft, or a failed floating seal between the planetary gear set and the travel motor. Check gear oil level in each final drive on a routine schedule, and inspect sprockets, idlers, and rollers for wear and for oil seepage at every service interval. Track pin and bushing play beyond normal spec, combined with heavy sprocket wear, points at an undercarriage nearing the end of its useful life rather than something you can adjust your way out of. Track tensioning grease cylinders and idler recoil springs store real energy, so have your dealer verify a safe release procedure before you loosen anything in that area.
The upper structure won't swing at all. What's the troubleshooting order owners use?
The swing brake on this machine is spring-applied and hydraulically released, so the first thing to rule out is inadequate pilot or brake-release pressure, not the swing motor or pump. If the brake isn't fully releasing, the upper stays locked even with a perfectly healthy motor and pump behind it. Once brake pressure is confirmed good, move to the swing relief and control valve, and only then suspect the swing motor itself for internal wear. Because this means running the swing circuit and checking pressures around a rotating mass held by a spring-applied brake, have your dealer or a qualified tech verify brake release pressure before anyone works in or around that circuit.
What should I check before buying a used PC200-3 (S/N 20001-up)?
Start with paperwork: a complete service history and consistent ownership record matters more than a low number on the hour meter by itself. Physically check the undercarriage for pin and bushing play, sprocket and roller wear, and any oil weeping at the final drives, since those repairs get expensive fast. Run every hydraulic function under load and watch for drift, uneven speed between functions, or unusual pump noise, since internal hydraulic wear is common on machines of this age. On the engine, check for oil-in-coolant or coolant-in-oil cross-contamination, listen for injector or bearing knock, and confirm the radiator and hydraulic oil cooler are clean with intact foam seals rather than already running hot. Walk the frame, boom, and arm for cracks or repair welds, and confirm the serial number on the machine matches the paperwork, since mismatched or reworked serial plates are a red flag on machines this old. A pre-purchase inspection by an independent tech or your dealer is worth the cost before you commit to a machine in this age and hour range.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific PC200-3(S/N 20001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.