Komatsucrane(no series)
Komatsu LW200L-1(S/N 1001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu LW200L-1(S/N 1001-UP) is a rough-terrain telescopic lifting crane from Komatsu's LW series, which spanned smaller LW100-1 and LW160-1 units up through the larger LW250 line. It is powered by the Komatsu S6D105-1, a turbocharged inline-6 diesel with mechanical (jerk-pump) fuel injection and no electronic engine control, placing it in Komatsu's mechanical-injection generation of construction and lifting equipment. Like other machines in the family, it rides on a 4-wheel-drive rough-terrain chassis with a telescopic boom, hydraulic outriggers, a hoist winch, load moment limiter, and swing brake driving the upper works. Independently published operating weight, rated lifting capacity, boom length, and fluid capacity figures specific to this exact serial range (1001-UP) are not documented in available sources, so these should be treated as unconfirmed rather than assumed.
Komatsu's LW-series rough-terrain cranes were built and sold as a coherent family sharing engine and driveline components across capacity classes; the LW200L-1 sits between the smaller LW100-1/LW160-1 and the larger LW250 in that lineup, and shares systems such as the steering pump with the LW160-1. Komatsu has since exited the telescopic rough-terrain crane business entirely, discontinuing the LW line without a direct in-house successor model, which means every LW200L-1 still in service is a legacy asset supported only through used parts, cross-model component sharing within the LW family, and era-correct S6D105-1 engine parts rather than an active OEM crane program. That makes documentation and parts identification for this exact serial range genuinely thin, and it is the reason sourcing correct, era-matched components matters more here than on a currently produced crane.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu LW200L-1(S/N 1001-UP) specifications
Engine
| Engine model | Komatsu S6D105-1 (6-cylinder diesel) |
| Aspiration | Turbocharged |
| Gross/net power | Not documented for this exact serial range — verify with your dealer |
| Displacement | Not documented for this exact serial range — verify with your dealer |
| Emissions tier | Pre-emissions-tier mechanical diesel (era-appropriate; not separately published) |
Weights
| Operating weight | Not documented for this exact serial range — verify with your dealer |
| Shipping weight | Not documented for this exact serial range — verify with your dealer |
| Ground pressure | Not applicable — wheeled crane, not published |
Dimensions
| Transport length | Not documented for this exact serial range — verify with your dealer |
| Transport width | Not documented for this exact serial range — verify with your dealer |
| Transport height | Not documented for this exact serial range — verify with your dealer |
| Wheelbase | Not documented for this exact serial range — verify with your dealer |
| Ground clearance | Not documented for this exact serial range — verify with your dealer |
Performance
| Travel speed | Not documented for this exact serial range — verify with your dealer |
| Maximum lift capacity | Not documented for this exact serial range — verify with your dealer |
| Gradeability | Not documented for this exact serial range — verify with your dealer |
Service capacities (summary)
| Fuel tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic system | Not documented for this exact serial range — verify with your dealer |
| Engine oil | Not documented for this exact serial range — verify with your dealer |
| Cooling system | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
LW200L-1(S/N 1001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not documented in accessible sources for this exact serial range — verify with dealer/OMM | Komatsu genuine diesel engine oil (EO series). Viscosity grade selected by ambient temperature per the factory chart (typical Komatsu EO10W-30 for temperate ranges, EO15W-40 for warmer climates); confirm exact grade band against the OMM's temperature chart for this unit |
| Cooling system | Not documented in accessible sources for this exact serial range — verify with dealer/OMM | Komatsu genuine coolant (supercoolant/antifreeze, ethylene-glycol base), mixed per the OMM's freeze-protection chart for the operating region |
| Fuel tank | Not documented in accessible sources for this exact serial range — verify with dealer/OMM | Diesel fuel meeting the grade called out in the OMM (low-sulfur diesel, No. 2-D or regional equivalent); no.1-D or winter-blend substitution below freezing per factory guidance |
| Powertrain/transmission compartment | Not documented in accessible sources for this exact serial range — verify with dealer/OMM | Komatsu genuine powertrain oil (TO series) where the machine uses a Komatsu-specified transmission fluid; grade per OMM temperature chart |
| Final drives (each) | Not documented in accessible sources for this exact serial range — verify with dealer/OMM | Komatsu genuine axle oil (AXO series, SAE 80W gear-oil class) if the chassis uses drive axles/final drives; confirm applicability for this crane's undercarriage layout |
| Hydraulic tank/system | Not documented in accessible sources for this exact serial range — verify with dealer/OMM | Komatsu genuine hydraulic oil (HO series); grade selected by ambient temperature per the OMM's chart (lighter viscosity for cold climates, heavier for hot climates) |
| Axles/differentials | Not documented in accessible sources for this exact serial range — verify with dealer/OMM | Komatsu genuine axle oil (AXO series) if fitted with differential housings separate from final drives; confirm against this crane's driveline configuration |
| Grease points (spec only) | Not applicable — grease fitting service, no fill volume specified | Komatsu genuine multi-purpose lithium EP grease (G2-LI), factory 'one-grease' spec for chassis, boom, and swing bearing points on Komatsu equipment of this era |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu LW200L-1(S/N 1001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the LW200L-1(S/N 1001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
With a mechanical-injection S6D105-1 and no ECM, there are no fault codes to watch, so oil analysis (particulates, TBN, coolant contamination) is the main early-warning tool on this crane. Track hydraulic oil condition closely since one circuit runs the telescoping cylinders, outriggers, and hoist winch; contamination shows up first as sluggish outrigger extension or boom drift under load. Log hoist wire rope wear and swing bearing grease intervals so trend data substitutes for the telemetry a newer crane would provide.
Corrective & Common Repairs
Recurring corrective work centers on the shared hydraulic circuit: telescoping cylinder seal replacement, boom wear-pad adjustment, and hoist winch brake or clutch wear from repeated lift cycles. On the S6D105-1, expect mechanical injection pump and injector service, turbocharger seal wear, and fuel system bleeding after filter changes. Swing bearing bolt torque and swing brake lining wear also recur given the crane's duty cycle of slewing loaded booms under rough-terrain conditions.
Overhaul & Rebuild Points
Major rebuild points are the telescoping cylinder seals and boom wear pads, where sag or lateral play signals wear, plus the hoist winch gearbox/brake pack and the swing reduction gear and bearing assembly. On the engine side, an S6D105-1 overhaul covers injection pump recalibration, turbocharger rebuild, and valve and injection timing reset, consistent with mechanical-injection engines of this generation. Steer axle and transfer case rebuilds follow standard Komatsu rough-terrain driveline practice.
Seasonal & Environment Servicing
In cold weather the mechanical-injection S6D105-1 needs winter-grade fuel and a starting aid or block heater since there is no electronic cold-start strategy to compensate. Match hydraulic oil viscosity to season for consistent boom telescoping and outrigger response. In hot, dusty rough-terrain duty, shorten air filter and radiator/oil cooler cleaning intervals and check wire rope and swing bearing grease more often, since abrasive exposure accelerates wear on the crane's exposed boom and slew linkages.
LW200L-1(S/N 1001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| 07000-05155 | O-Ring,Hydraulic Oil Filter | Hydraulic service | Check fitment → |
| 09645-00120 | Plate? Instruction,Full Flow Filter (For Kt1150) | Scheduled service item | Check fitment → |
| 22W-62-17190 | Filter, Internal | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
LW200L-1(S/N 1001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine oil pressure lamp (red, action lamp) | Engine oil pressure has dropped below the safe operating minimum | Low oil level, failed oil pump, clogged oil filter, or faulty pressure switch/sender | Stop the engine immediately, check oil level, inspect filter and pressure switch before restart |
| Coolant temperature lamp (red, action lamp) | Engine coolant temperature has exceeded the safe operating threshold | Low coolant level, slipping or broken fan belt, blocked radiator, or thermostat failure | Stop machine, let engine idle cool or shut down, check coolant level and belt condition once cool |
| Charge lamp (red) | Alternator is not charging the battery circuit | Broken or slipping alternator belt, failed alternator, or loose/corroded wiring | Check belt tension and wiring first, then test alternator output |
| Air cleaner restriction lamp (yellow, caution lamp) | Air filter element is clogged, restricting intake airflow to the turbocharged engine | Dirty or saturated air filter element | Inspect and clean or replace the air filter element |
| Fuel level lamp (yellow, caution lamp) | Fuel tank level is low | Fuel consumed near empty during operation | Refuel before continuing work to avoid air entering the mechanical injection fuel system |
| Hydraulic oil temperature lamp (yellow/red) | Hydraulic oil temperature has risen above normal operating range | Low hydraulic fluid level, clogged oil cooler, or sustained high-load operation (e.g., prolonged lifting/outrigger work) | Idle down, check hydraulic fluid level and cooler fins for blockage |
| Overload/moment limiter lamp and buzzer (red, crane-specific) | Lifted load has reached or exceeded the rated capacity for the current boom length/angle/radius | Load exceeds the load chart limit for the current configuration, or limiter sensor miscalibration | Stop hoisting, lower or reduce load per the rated load chart, do not override the limiter |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
LW200L-1(S/N 1001-UP) attachments & work tools
Main Hook Block & Ball Hook
Standard multi-sheave main hook block for full multi-part reeving, plus a single-line ball (whip) hook carried at the boom nose or jib tip for fast, light auxiliary lifts. Block capacity is sized to the crane's rated tonnage; exact rating for this serial range is not independently published, so confirm the fitted block's capacity with your dealer before use.
Boom Extension / Fly Jib
Manually stowed, slide-out fly jib carried alongside the main telescopic boom for extra reach on light loads, offsettable at a small number of fixed angles per factory practice for this crane family. Length varies by configuration/series across this OEM's rough-terrain lineup, from short stowable jibs on smaller siblings up to two-stage jibs on larger-tonnage siblings; the specific jib length for this model and serial range is not documented in available sources.
Outrigger System
Hydraulically extending box-beam outriggers with vertical hydraulic jacks and bolt-on or pinned float pads for ground bearing, deployed independently at each corner. This is a fixed chassis system rather than a swappable work tool; beam layout (H-type or X-type) follows the same OEM family's practice used on siblings of this class.
Counterweight Configuration
Bolt-on slab-type counterweight fitted at the rear of the superstructure, sized to the machine's rated lifting class. Regional or emissions-spec variants of siblings in this family are known to ship with different counterweight packages, so total counterweight for this exact serial range should be confirmed with a dealer rather than assumed from sibling models.
Main Hoist Winch
Single hydraulic hoist drum reeving wire rope through the main hook block sheaves; a second/auxiliary winch is not standard for cranes in this class. A boom-head or jib-tip sheave/lug is provided for running a single whip line with the ball hook.
No Earthmoving-Style Attachments or Quick-Coupler
As a telescopic rough-terrain lifting crane, this model does not use excavator- or loader-style hydraulic quick-couplers, buckets, or grapples. Boom-end tooling is limited to the hook block, ball hook, and stowable fly jib noted above; any magnet, clamshell, or man-basket rigging would need a separate load-rated package not documented for this model.
All LW200L-1(S/N 1001-UP) assemblies by section
Every catalogued assembly group for the Komatsu LW200L-1(S/N 1001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Drive Shaft? Differential? Wheels And Air System
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Accelerator Cylinder Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
| 07***08 | Plug,(Without Oil Pressure Switch) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Air Compressor To Wet Reservoir)
| 01***30 | Bolt,(For Mechanical Governor) | 6 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Air Compressor To/From Governor)
| 01***75 | Bolt,(For Shipping) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
| 01***29 | Washer, Spring | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Brake Booster Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 3 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Brake Valve Line)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***08 | Nut,(For Russian) | 6 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Dry Reservoir To 7-Solenoid Valve )
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***65 | Bolt,R.H | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Dry Reservoir To Swivel Joint)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
| 07***13 | Connector | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Engine Control Valve Line)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Engine Revolution Set Cylinder Line)
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Exhaust Air Barke Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Grease Pump Line)
| 01***60 | Bolt,(For Japan And Sweden) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
| 22***20 | Valve Ass'Y,Magnetic | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (High-Low And 2/4 Wd Cylinder Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Parking Brake Chamber Line)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Transmission F-R Cylinder Line)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***25 | Bolt,Without Revolution Sensor | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Transmission Selector Cylinder Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Wet Reservoir To Dry Reservoir)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Axle Housing
| 04***60 | Screw, Serial Number Plate | 4 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 2 |
| 07***30 | Breather | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Brake Piping (Oil Reservoir And Front Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 14 |
| 01***55 | Capscrew | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Brake Piping (Rear Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***55 | Capscrew | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Fornt Lower R.H. Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***45 | Screw | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Front Lower L.H. Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***45 | Screw | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Front Upper L.H. Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***45 | Screw | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Front Upper R.H. Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***45 | Screw | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Rear L.H.)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***45 | Screw | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Rear R.H.)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***45 | Screw | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Reservoir To Distributor)
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 12 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Final Drive
| 01***16 | Bolt,(For Slag Handling) | 16 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 16 |
| 01***45 | Bolt,(Cold Terrain Spec.) | 16 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Front Differential
| 01***50 | Bolt - Torque Converter Totransmission Mounting | 2 |
| 01***60 | Bolt, Trunnion Cap | 6 |
| 01***40 | Bolt,(Not Used With Cab) | 11 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Front Drive Shaft
| 01***38 | Washer,Spring | 8 |
| 22***10 | Bolt | 8 |
| 22***30 | Cross Pin Ass'Y | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Front Wheel Brake
| 22***02 | Brake Ass'Y,R.H | 1 |
| 22***10 | Plate Ass'Y,R.H | 1 |
| 22***20 | Wheel Cylinder A.,Lower | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Knuckcle And Tie Rod
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Rear Differential
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Rear Drive Shaft
| 01***38 | Washer,Spring | 8 |
| 22***10 | Bolt | 8 |
| 22***30 | Cross Pin Ass'Y | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Rear Wheel Brake
| 22***10 | Plate Ass'Y,R.H | 1 |
| 22***40 | Shoe Ass'Y | 2 |
| 22***50 | Nut | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Wheel
| 22***20 | Tube | 1 |
| 22***30 | Flap | 1 |
| 22***40 | Valve | 1 |
Engine Related Parts And Electrical System
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Accelerator Pedal
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***35 | Screw | 1 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Air Cleaner Connection
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 10 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Battery
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***18 | Bolt | 1 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Boom Length Sensor
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***10 | Bolt | 8 |
| 01***08 | Screw, Control Lever Rod | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Boom Reley Box
| 01***10 | Screw, Mount Wire Assembly | 12 |
| 01***10 | Screw,(For Lighter) | 4 |
| 01***02 | Nut (1) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Battery Line)
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Boom Line) (1/2)
| 01***12 | Bolt,(With Cylinder Cover) | 15 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 14 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Boom Line) (2/2)
| 01***12 | Bolt,(With Cylinder Cover) | 14 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Cab Line)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***12 | Bolt,(With Cylinder Cover) | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Emergency Steering Line)
| 01***20 | Bolt,(Without Maintenance Monitor) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 7 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Engine Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Front Grille Line)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 18 |
| 01***16 | Screw, Mount Parking Lights | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Lower Mdt Box And Fuse Box Line)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 3 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Oss Control Box And Limit Switch Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Outrigger Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Rear Grille Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 14 |
| 01***10 | Screw,(For Wiper Switch Earth) | 2 |
| 01***04 | Nut,(For Air Conditioner Less) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Rear Steering Lock Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Revolving Frame Line)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 5 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Slip Ring Lower Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 12 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Slip Ring Upper Line)
| 01***05 | Bolt | 4 |
| 01***20 | Screw | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Starting Motor Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 11 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 11 |
| 08***19 | Band,(Without Air Conditioner) | 22 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Tachograph Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Torque Converter And Fuse Box Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 9 |
| 01***10 | Screw,(For Wiper Switch Earth) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Electrical System (Upper Mdt Box Line)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***12 | Bolt,(With Cylinder Cover) | 14 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Engine Control Lever (Chassis Side)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***45 | Bolt | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Engine Control Linkage (1/2)
| 01***25 | Bolt,(For Automatic) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Engine Control Linkage (2/2)(#1001-1126)
| 01***25 | Bolt,(For Automatic) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,Stopper | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Engine Control Linkage (2/2)(#1127-)
| 01***25 | Bolt,(For Automatic) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,Stopper | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Engine Mounting Parts
| 01***25 | Bolt | 2 |
| 01***35 | Bolt | 2 |
| 13***70 | Washer | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Exhaust Connection
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 18 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Fuel Tank
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
| 07***12 | Gasket,(Without Air Compressor Type) (K1) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Instrument Panel (Chassis Side)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***10 | Screw,(For Lighter) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Instrument Panel (Front)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***10 | Screw,(For Lighter) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Instrument Panel (L.H. Lower)
| 01***10 | Screw,(For Lighter) | 4 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 4 |
| 01***05 | Washer,(Without Window Washer) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Instrument Panel (L.H. Upper)
| 01***10 | Screw,(For Lighter) | 8 |
| 01***08 | Screw - Holder | 4 |
| 01***16 | Screw, Mount Parking Lights | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Junction Box (Chassis Side)
| 01***10 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***10 | Screw, Mount Wire Assembly | 36 |
| 01***16 | Screw,(Sandy And Dusty Terrain S.) | 14 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Mdt Box (Chassis Side)
| 01***12 | Screw | 16 |
| 01***20 | Screw (Op) | 10 |
| 01***02 | Nut (1) | 16 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Mdt Box (Revolving Side)
| 01***12 | Screw | 16 |
| 01***12 | Screw | 8 |
| 01***02 | Nut (1) | 16 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Oss Control Box
| 01***06 | Screw | 4 |
| 01***08 | Screw | 4 |
| 01***03 | Nut,(With Joy Stick Steering) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Over-Winding Detection Switch
| 01***10 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***12 | Bolt,(With Cylinder Cover) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Over-Winding Detection Switch (Aux. Wind)
| 01***10 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Over-Winding Detection Switch (Single Top)
| 01***10 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***12 | Bolt,(With Cylinder Cover) | 3 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Engine Related Parts And Electrical System : Radiator And Oil Coller
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 22 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 13 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
Frame And Guard
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Auxiliary Seat
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Car Heater (1/2)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***25 | Bolt,(For Automatic) | 5 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Car Heater (2/2)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 3 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Center Fender
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 18 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Engine Guard And Rear Grill
| 01***10 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Front Fender
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 25 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Front Grille
| 01***25 | Bolt,Without Revolution Sensor | 13 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 26 |
| 01***08 | Nut, Regular Hexagon (M10-1.50) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Fuel Tank Mounting Bracket
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 10 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Guide Sheave
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 8 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Hydraulic Tank Mounting Bracket
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 12 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Main Frame
| 22***00 | Frame Ass'Y | 1 |
| 22***10 | Frame Ass'Y,(For Car Cooler) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (Cab) (1/8)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***12 | Screw,(With Articulate Indicator) | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (Door Parts) (5/8)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***10 | Screw,(For Wiper Switch Earth) | 6 |
| 01***12 | Screw,(With Articulate Indicator) | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (Door Parts) (6/8)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***10 | Screw,(For Lighter) | 2 |
| 01***12 | Screw,(Additional Sun Visor) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (Front Window) (2/8)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 5 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (L.H. Window) (3/8)
| 01***10 | Screw,(For Lighter) | 2 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 4 |
| 01***20 | Screw | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (R.H. Window And Door Parts) (7/8)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 5 |
| 01***20 | Screw - Turn Signal And Parkinglight Mounting | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (Rear Window) (4/8)
| 01***12 | Screw,(With Articulate Indicator) | 4 |
| 01***10 | Screw | 6 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (Upper Window) (8/8)
| 01***08 | Screw, Terminal | 2 |
| 01***10 | Screw,(For Lighter) | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Operator'S Seat
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Outrigger
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 16 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Rear Fender
| 01***25 | Bolt,Without Revolution Sensor | 16 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 30 |
| 01***03 | Nut (Welded) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Rear Panel And Battery Box
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 28 |
| 01***08 | Screw - Holder | 2 |
| 01***16 | Screw | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Revolving Frame (1/2)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 16 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Revolving Frame (2/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 17 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Revolving Frame Cover (L.H. Side)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 14 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Revolving Frame Cover (R.H. Side)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 14 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 15 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Suspension
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***85 | Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***40 | Bolt,(With Center Guard) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Upper Guard (In Cab) (1/2)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 7 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Frame And Guard : Upper Guard (In Cab) (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***12 | Screw,(With Articulate Indicator) | 4 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 10 |
Mark Plate? Tool And Kit
Komatsu : Lw200l-1(S/N 1001-Up) : Mark Plate? Tool And Kit : Marks And Plates (1/2)
| 09***00 | Plate? Caution,Keep Out Of Turning Area | 1 |
| 09***20 | Plate? Instruction,Full Flow Filter (For Kt1150) | 1 |
| 20***90 | Plate? Instruction,Hydraulic Oil | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Mark Plate? Tool And Kit : Marks And Plates (2/2)
| 01***06 | Screw | 4 |
| 01***10 | Screw (Op) | 4 |
| 09***00 | Plate? Instruction,Fuel | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Mark Plate? Tool And Kit : Tool
| 07***90 | Tube | 1 |
| 07***00 | Pump,Grease | 1 |
| 07***50 | Pump, (Bellows Type) | 1 |
Optional Parts
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Automatic Brake Cylinder (Except Japan)
| 07***85 | O-Ring,(For Snow Removing) | 1 |
| 07***25 | Packing | 1 |
| 07***56 | Seal,Dust (Kit) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Center Fender (Except Japan)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 18 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Central Lubrication Piping (Distributor Rear R.H.) (Except Japan)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***45 | Screw | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Control Lever Grease Piping (Except Japan)
| 07***00 | Fitting, Grease (Steering Cylinder) | 7 |
| 07***08 | Plug,(Without Auto Priming System) | 4 |
| 07***10 | Connector | 9 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Front Grille (Except Japan)
| 01***25 | Bolt,Without Revolution Sensor | 13 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 20 |
| 01***08 | Nut, Regular Hexagon (M10-1.50) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Guide Sheave (Except Japan)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Outrigger) (1/2) (Except Japan)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 15 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Selector Valve To Winch Brake Cylinder) (Except Japan)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Selector Valve To Winch Swivel Joint) (Except Japan)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Steering Front) (Except Japan)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Tank To Solenoid Valve) (Except Japan)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 2 |
| 01***11 | Nut,(With Under Mirror) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Valve Drain) (Except Japan)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***75 | Bolt,(For Adjusting) | 1 |
| 01***08 | Nut,(For Russian) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Winch Motor Line) (1/4) (Except Japan)
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 20 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Winch Motor Line) (2/4) (Except Japan)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***60 | Bolt, Mount Pole | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Winch Motor Line) (3/4) (Except Japan)
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Hydraulic Piping (Winch Motor Line) (4/4) (Except Japan)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 9 |
| 01***09 | Nut,(With Body Positioner) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 9 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Instrument Panel (Front) (Except Japan)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***10 | Screw,(For Lighter) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Instrument Panel (L.H. Upper) (Except Japan)
| 01***10 | Screw,(For Lighter) | 8 |
| 01***08 | Screw - Holder | 4 |
| 01***16 | Screw, Mount Parking Lights | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Marks And Plates (1/2) (English)
| 09***00 | Plate? Safety,Off Limit Within Swing Area | 1 |
| 09***20 | Plate? Instruction,Full Flow Filter (For Kt1150) | 1 |
| 09***02 | Plate? Instruction,Radiator | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Marks And Plates (2/2) (English)
| 01***06 | Screw | 4 |
| 09***00 | Product Graphic, Important - Diesel Fuel | 1 |
| 09***00 | Plate? Safety,Lock Lever (With Lock Pin) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Rear Steering Mount (Except Japan)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 8 |
| 22***20 | Shaft | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Swing Machinery (Except Japan)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***45 | Screw | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch (1/2) (Except Japan)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 24 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch (2/2) (Except Japan)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Brake Linkage (Except Japan)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 1 |
| 01***40 | Bolt | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Brake Pedal (Except Japan)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 6 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Clutch (Except Japan)
| 01***48 | Washer,Spring (For Slag Handling), Washer-Spring | 2 |
| 22***20 | Clutch Ass'Y | 1 |
| 23***10 | Plate | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Clutch Control Lever (Except Japan)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***05 | Nut,L.H. Thread (D31s) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Control Lever (Except Japan)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***10 | Screw,(For Lighter) | 1 |
| 01***03 | Nut,(With Joy Stick Steering) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Control Linkage (Except Japan)
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***03 | Nut; Was 01508-20603, Nut? L.H. Thread,L.H. Thread | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Motor (1/2) (Except Japan)
| 04***30 | Seal, Dust | 1 |
| 70***00 | Motor Ass'Y,Winch | 1 |
| 70***20 | Seal,Oil (Kit) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Motor (2/2) (Except Japan)
| 01***55 | Bolt,(10m) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Motor Shuttle Valve (Except Japan)
| 07***05 | O-Ring (K1) | 1 |
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 5 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Optional Parts : Winch Weight (Except Japan)
| 01***55 | Bolt,(Tree Pusher Dozer) | 6 |
| 01***65 | Bolt | 2 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 6 |
Steering And Swing System
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Master Cylinder
| 23***10 | Cylinder Ass'Y | 1 |
| 23***10 | Piston Ass'Y (Kit) | 1 |
| 23***20 | Spring (Kit) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Rear Steering Lock
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 8 |
| 01***12 | Bolt,(With Cylinder Cover) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Steering Handle
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 3 |
| 01***08 | Screw, Terminal | 2 |
| 01***10 | Screw,(For Lighter) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Swing Brake Lever And Piping (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***35 | Bolt,(For Position Fixing) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Swing Brake Lever And Piping (2/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***08 | Nut,(For Russian) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Swing Circle
| 01***60 | Washer,Single Flange (Trimming) | 32 |
| 04***42 | Pin,Dowel? Gear Case Cover | 3 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Swing Motor (1/2)
| 07***05 | Seal (Kit) | 1 |
| 22***10 | Seal Kit | 1 |
| 22***10 | Motor Ass'Y | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Swing Motor (2/2)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| TZ***09 | O-Ring (Kit) | 1 |
| TZ***58 | Seal (Kit) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Swing Motor Brake Valve
| 07***18 | O-Ring, Divider Valve Mounting | 2 |
| 07***22 | O-Ring,(F5350-63a0 -26 ) | 2 |
| 22***70 | O-Ring (Kit) | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Steering And Swing System : Swing Motor Mounting
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***45 | Screw | 8 |
Torque Convertor And Transmission
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : 1st Clutch
| 01***30 | Bolt,Radio Controlled Slag Handling | 6 |
| 01***40 | Bolt,(With Service Valve R.H.) | 12 |
| 01***36 | Washer,Radio Controlled Slag Handling | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : 2nd Clutch
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 4 |
| 04***16 | Pin, Spring | 3 |
| 09***20 | Washer,Thrust | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Damper
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 24 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Forward And 3rd Clutch
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
| 04***16 | Pin, Spring | 3 |
| 04***18 | Ring,Snap | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : High-Low Shift Fork
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Parking Brake Linkage
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Line Piping (Oil Cooler Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Line Piping (Pto Clutch Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***80 | Bolt,(For Long Lever Control) | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Line Piping (Transmission Line) (1/2)
| 01***40 | Bolt,(With Air Conditioner) | 2 |
| 01***50 | Bolt (Kit) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Line Piping (Transmission Line) (2/2)
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Take Off (1/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Take Off (2/2)
| 01***60 | Bolt,(For Japan And Sweden) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Reverse Clutch
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Torque Converter
| 01***25 | Bolt, Mount Cover | 14 |
| 01***35 | Bolt, M10x1.5x35 | 8 |
| 01***80 | Bolt | 24 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Torque Converter Housing
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 20 |
| 01***75 | Bolt | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Torque Converter Valve
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***45 | Bolt, Mount Body To Block | 4 |
| 01***08 | Screw | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transfer
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 14 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transfer Output Shaft (1/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
| 01***80 | Bolt,(For Adjustable Rod) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transfer Output Shaft (2/2)
| 01***20 | Bolt,(Without Maintenance Monitor) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Case
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***55 | Bolt,(Tree Pusher Dozer) | 4 |
| 01***50 | Bolt,(Without R.O.P.S.) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Lever
| 01***10 | Bolt,(With Auto Emergency Steering) | 11 |
| 01***25 | Bolt,Without Revolution Sensor | 5 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Linkage (1/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***60 | Bolt | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Linkage (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 9 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***09 | Nut,(With Body Positioner) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Valve (1/2)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 7 |
| 01***55 | Bolt,(For Trimming Dozer) | 7 |
| 01***65 | Bolt,(For Alternator Bracket Mount) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Valve (2/2)
| 01***80 | Bolt,(See Fig.0131) | 4 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 10 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Mounting Parts
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 16 |
| 01***15 | Bolt | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Oil Filter
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 3 |
| 07***25 | O-Ring,Injection Pump Mounting | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Torque Convertor And Transmission : Universal Joint
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
| 07***45 | Bolt,(Tree Pusher Dozer) | 8 |
| 22***00 | Universal Joint A | 1 |
Work Equipment
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : 1st Boom (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : 1st Boom (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
| 04***12 | Pin,Cotter (For Ripper) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : 2nd Boom
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Rubber Shoe) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : 3rd Boom (1/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : 3rd Boom (2/3)
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : 3rd Boom (3/3)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Bowl Hook
| 01***55 | Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Disorder Winding Protective System (Op)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***50 | Bolt | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Jib Mounting Parts (1/2)(#1063-)
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Jib Mounting Parts (2/2)(#1063-)
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 2 |
| 01***35 | Bolt, Hydraulic Tank Mounting | 4 |
| 01***60 | Bolt | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Jib Rod(#1063-)
| 01***12 | Bolt,(With Cylinder Cover) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Jib(#1001-1062)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 9 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Jib(#1063-)
| 01***12 | Bolt,(With Cylinder Cover) | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Main Hook
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Bolt,(For Rubber Shoe) | 16 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Single Top
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 1 |
| 04***64 | Pin,Snap (Welded) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Top Boom
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Winch (1/2)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 24 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Winch (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment : Winch Clutch
| 01***48 | Washer,Spring (For Slag Handling), Washer-Spring | 2 |
| 22***20 | Clutch Ass'Y | 1 |
| 23***10 | Plate | 1 |
Work Equipment Control System
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Automatic Brake Cylinder
| 07***85 | O-Ring,(For Snow Removing) | 1 |
| 07***25 | Packing | 1 |
| 07***56 | Seal,Dust (Kit) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Boom Elevate Contorl Pedal
| 01***06 | Nut? L.H. Thread,L.H. Thread (For Chinese) | 1 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 1 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Boom Elevate Control Lever
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Boom Elevate Cylinder(#1001-1131)
| 01***95 | Bolt,(For 2nd Travel Speed) (Op) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 1 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Boom Elevate Cylinder(#1132-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***95 | Bolt,(For 2nd Travel Speed) (Op) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Boom Telescope Control Lever
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Boom Telescope Cylinder
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***12 | Screw | 1 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Control Lever Grease Piping
| 07***00 | Fitting, Grease (Steering Cylinder) | 9 |
| 07***10 | Connector | 13 |
| 17***50 | Elbow | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Drum Lock Control Lever
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 8 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Drum Lock Control Linkage
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Clutch
| 06***06 | Bearing, Ball | 1 |
| 06***07 | Bearing,Ball | 2 |
| 06***08 | Bearing | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Control Valve (Auxiliary Winch)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt, Seal Cover Mounting | 4 |
| 07***30 | Ring, Seal - Between Sections | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Control Valve (Boom) (1/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***20 | Bolt (Itl) | 6 |
| 01***25 | Bolt, Seal Cover Mounting | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Control Valve (Boom) (2/2)
| 01***05 | Nut (Welded) | 1 |
| 07***12 | O-Ring (Itl) | 1 |
| 07***12 | Ring,Back-Up; Was 07001-02012, Ring,Back-Up (Itl) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Control Valve (Main Winch) (1/3)
| 01***35 | Bolt,(For Position Fixing) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 4 |
| 01***25 | Bolt | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Control Valve (Main Winch) (2/3)
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
| 01***50 | Bolt,(For Strengthened Cover) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Control Valve (Main Winch) (3/3)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Control Valve (Swing) (1/2)
| 01***16 | Bolt (Op) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Control Valve (Swing) (2/2)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 70***00 | Valve Ass'Y,Suction | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Accumulator Charge Pump To Swivel Joint)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***11 | Nut,(With Under Mirror) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Accumulator Pressure Gauge Line)
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 4 |
| 01***08 | Nut,(For Russian) | 2 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Boom Pump To Swivel Joint)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Boom Selector Valve To Pilot Check Valve)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 6 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Charge Valve? Winch Motor To Accumulator)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***08 | Nut,(For Russian) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Control Valve To Boom Pilot Check Valve)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt, Mount Filter To Bracket | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Control Valve To Elevate Cylinder)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Bolt,(For Strengthened Cover) | 1 |
| 01***11 | Nut,(With Under Mirror) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Control Valve To Swing Motor)
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***13 | Nut, Regular Hexagon (M22-1.25) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Control Valve To Swivel Joint)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Control Valve To Unload Pilot Valve)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***75 | Bolt,(For Adjusting) | 1 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Drain Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***09 | Nut,(With Body Positioner) | 6 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Elevate Cylinder To Pressure Sensor)
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Emergency Steering Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Front L.H. Outrigger Cylinder Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Front R.H. Outrigger Cylinder Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Front Steering Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Front Suspension Lock Cylinder Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***25 | Screw | 10 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Outrigger Valve To Shut-Off Valve) (1/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***00 | Bolt, Mount Back-Up Alarm | 3 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Outrigger Valve To Shut-Off Valve) (2/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 15 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Pilot Check Valve To 1st Telescope Cylinder)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***11 | Nut,(With Under Mirror) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Pilot Check Valve To 2nd Telescope Cylinder)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Priority Valve To Swivel Joint)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***09 | Nut,(With Body Positioner) | 2 |
| 01***11 | Nut,(With Under Mirror) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Rear L.H. Outrigger Cylinder Line)
| 01***25 | Bolt,Without Revolution Sensor | 14 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Rear R.H. Outrigger Cylinder Line)
| 01***25 | Bolt,Without Revolution Sensor | 15 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Rear Steering Line)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***09 | Nut,(With Body Positioner) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Rear Sttering Lock Line)
| 01***12 | Bolt,(With Cylinder Cover) | 1 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Rear Suspension Lock Cylinder Line)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Return Line)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Steering Valve Line) (1/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***08 | Nut,(For Russian) | 6 |
| 01***11 | Nut,(With Under Mirror) | 10 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Steering Valve Line) (2/2)
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Suspension Lock Valve Line)
| 01***16 | Bolt (With Air Heater & Conditioner) | 12 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 12 |
| 07***12 | T/Plug, Plug,(For Power Tilt Mech Angle) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Suspension Selector Valve Line)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Mount Valve | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Swing? Steering Pump To Swivel Joint) (1/2)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Swing? Steering Pump To Swivel Joint) (2/2)
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
| 01***50 | Bolt,(With Service Valve R.H.) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Swivel Joint To Accumulator Charge Valve)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***09 | Nut,(With Body Positioner) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Swivel Joint To Control Valve)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 16 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Swivel Joint To Priority Valve)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Tank To Pump)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Winch Clutch Valve To Brake Cylinder)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Winch Clutch Valve To Clutch Cylinder)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Winch Motor To Clutch Valve)
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Winch Pump To Swivel Joint) (1/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Winch Pump To Swivel Joint) (2/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Winch Pump To Swivel Joint) (3/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***11 | Nut,(With Under Mirror) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 3 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Winch Valve To Winch Motor) (1/2)
| 01***11 | Nut,(With Under Mirror) | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 16 |
| 01***32 | Washer,(With Auto Emergency Steering) | 40 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Piping (Winch Valve To Winch Motor) (2/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***60 | Bolt, Mount Pole | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump (Accumulator Charge) (2/2)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 8 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump (Boom And Winch)
| 04***20 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y | 2 |
| 70***10 | Shaft Seal | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump (Swing And Steering) (1/2)
| 04***12 | Ring, Snap | 1 |
| 04***18 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Pump (Transmission)
| 04***18 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y | 1 |
| 70***10 | Seal, Oil | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Hydraulic Tank
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 16 |
| 01***16 | Bolt,(Without Cab) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 16 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Outrigger Jack Cylinder
| 01***40 | Bolt,(With Air Conditioner) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Outrigger Slide Cylinder
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 07***75 | O-Ring,Cylinder Head | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Steering Cylinder
| 01***11 | Nut,(With Under Mirror) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***85 | O-Ring,(For Snow Removing) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Suspension Lock Cylinder
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 2 |
| 04***20 | Ring, Snap | 4 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Swing Control Lever
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Swing Relief Valve
| 01***08 | Nut (Op) | 1 |
| 07***11 | O-Ring (Kit) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Swivel Joint
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***75 | Bolt, Tube Mounting | 5 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 5 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Winch Brake Linkage
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 1 |
| 01***40 | Bolt | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Winch Brake Pedal
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 12 |
| 01***35 | Bolt,(For Position Fixing) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Winch Clutch Control Lever
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***05 | Nut,L.H. Thread (D31s) | 2 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Winch Control Lever
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***10 | Screw,(For Lighter) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Winch Control Linkage
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***03 | Nut; Was 01508-20603, Nut? L.H. Thread,L.H. Thread | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Winch Motor (1/3)
| 04***30 | Seal, Dust | 1 |
| 70***00 | Motor Ass'Y,Winch | 2 |
| 70***20 | Seal,Oil (Kit) | 1 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Winch Motor (2/3)
| 01***55 | Bolt,(10m) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 6 |
Komatsu : Lw200l-1(S/N 1001-Up) : Work Equipment Control System : Winch Motor (Shuttle Valve) (3/3)
| 07***05 | O-Ring (K1) | 1 |
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 5 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Frequently asked questions
What engine powers the Komatsu LW200L-1(S/N 1001-UP)?
A Komatsu S6D105-1, a turbocharged inline-6 diesel with mechanical fuel injection and no electronic engine control, shared across several machines of this Komatsu generation.
What is the operating weight of the LW200L-1(S/N 1001-UP)?
Not independently documented for this exact serial range. No verified gross weight, axle loading, or dimensional data specific to S/N 1001-UP has surfaced in available Komatsu documentation or crane-spec references.
What replaced the Komatsu LW200L-1?
No direct in-house successor. Komatsu discontinued its telescopic rough-terrain crane line entirely, so the LW200L-1 and its LW-family siblings remain supported only through the used-equipment and legacy parts market.
What LW200L-1(S/N 1001-UP) owners discuss
What do operators and mechanics report about the S6D105-1 engine's everyday behavior in this crane?
Genuine field reports tied specifically to the LW200L-1 are hard to find online; specialty crane databases and equipment forums index the LW80, LW100, and LW250 series far more than the LW160-1/LW200-1/LW200L-1 line, so treat the following as general knowledge for the S6D105-1 engine family rather than confirmed LW200L-1 case history. This engine uses a mechanical (jerk-pump) injection system with no engine ECM, so idle quality and throttle response depend on injection pump calibration and governor linkage adjustment, not software. Soft spots reported across the wider S6D105-1 family (shared with several Komatsu wheel loaders and graders of the same era) are injector nozzle wear causing rough idle and smoke, and turbocharger bearing wear showing up as a rising whine and oil weeping past the seals. Neither is unique to this crane; both are normal mechanical-diesel wear items on a machine of this age.
Are there known undercarriage or structural wear patterns for this crane class?
No LW200L-1-specific wear-pattern writeups turn up in public discussion. What is well established for rough-terrain telescopic cranes of this size and era, and applies here, is that the large flotation tires wear unevenly if crab or coordinated steering modes are used on rough or paved surfaces rather than gravel/dirt sites they were meant for, and the telescopic boom's wear pads and slide plates lose clearance over years of extension cycles, showing up as boom tip sag or a clunk on retraction. Outrigger beam pins and pads are another routine wear point on machines that cycle outriggers daily. None of this is a defect specific to the LW200L-1; it is standard wear-item behavior for any telescopic rough-terrain crane of comparable capacity.
What quirks come up around the S6D105-1 engine series specifically?
The S6D105-1 shows up across several different Komatsu machines, this crane and its LW160-1 sibling included, plus wheel loaders and motor graders of the same generation, and running changes exist within the series (suffixes such as -1B, -1C, -1E, and -B-1) with differences in injection pump calibration and turbo spec. Because of that, fuel consumption and torque figures pulled from a generic S6D105-1 writeup do not always match this exact crane application; the applicable figures should come from documentation tied to the crane itself, not the engine alone. No LW200L-1-specific engine complaint pattern is documented in public discussion beyond the general mechanical-diesel wear items already noted.
What electrical or sensor issues come up on this type of crane?
There is no LW200L-1-specific electrical fault history available publicly. For rough-terrain cranes of this generation generally, the parts of the system most prone to drift or failure are the load moment/rated capacity indicator's boom angle sensor and load cell, plus the length (extension) sensor on the telescopic section. Symptoms mechanics associate with this class of system are erratic capacity readings, false overload cutouts, or a system that will not zero-calibrate, usually traced to sensor misalignment, chafed wiring at boom hinge points, or connector corrosion rather than the sensor itself. Because this system enforces the crane's safe working load, have your dealer verify calibration and sensor function on any load-indicator fault rather than resetting or bypassing it in the field.
What about the swing and steering hydraulics?
This crane uses a hydraulic swing (slew) system with a swing brake, and separate steering and swing hydraulic circuits, per the machine's own service documentation. Public mechanic discussion specific to this crane's swing or steering behavior is not available; the general pattern for hydraulic-slew rough-terrain cranes of this size is that a spongy or slow swing brake response points to worn brake linings or contamination in the brake circuit, and steering wander in crab mode usually traces to worn steering cylinder seals or linkage bushings rather than the pump itself. Because swing brake holding and steering are load-holding and travel-safety functions, have your dealer verify brake and steering circuit condition before returning the crane to service.
What should a buyer check on a used LW200L-1 (S/N 1001-UP)?
Dedicated buyer guidance for this exact serial-number range is not published online, so apply the standard rough-terrain telescopic crane pre-purchase checklist and confirm findings against this machine's own documentation rather than a sibling model's. Check boom extension and retraction for smooth travel without binding or sag, which points to wear pad clearance; outrigger cylinders and pads for drift under load and pin wear; swing brake holding and smoothness; load moment/rated capacity indicator calibration and any fault-log history; hour meter reading against service records for consistency; visible oil weeping at the turbocharger and injection pump on the S6D105-1; tire wear pattern, since uneven wear suggests steering or alignment issues; and hydraulic tank and filter condition, since a mechanical-era crane like this relies on filtration rather than onboard diagnostics to protect the pump and valves. Have your dealer verify load chart compliance and run a full load-indicator function test before any lift is performed on a machine coming from unknown service history.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific LW200L-1(S/N 1001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.