Komatsucrane(no series)
Komatsu LW160-1(S/N 1001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu LW160-1 (S/N 1001-UP) is a Japan-market, city-class rough-terrain truck crane built around a telescopic boom, hydraulic outriggers, and a powershift travel drive with torque-converter transmission and a swing gear case fitted with a mechanical swing brake. It is powered by the Komatsu S6D105-1, a six-cylinder mechanical-injection diesel from the pre-electronic-control era, the same engine family used in the related LW200L-1 crane. Exact operating weight, overall dimensions, and full production years for this serial range are not publicly documented; buyers should confirm these against the machine data plate or a Komatsu dealer rather than assume figures from other LW-series models. Within Komatsu's LW crane line the LW160-1 sits between the smaller LW100-1 (a 10-ton class crane built in H-type and X-type sub-variants) and the larger LW200L-1 and LW250-series machines, and it appears to have been offered as a single telescopic-boom configuration rather than in multiple factory variants.
No internal serial-prefix split has surfaced for the LW160-1 the way it has for the LW100-1, which points to one continuous production run from S/N 1001-UP rather than a mid-run engineering change. That consistency is useful in the parts market: because the LW160-1 shares its engine, hydraulic components, and swing/travel drivetrain architecture with the LW200L-1, engine and power-train parts sourced for either machine largely cross over, even though crane-specific structural parts (boom sections, outrigger beams, swing bearing) are scarce today. Komatsu no longer builds this class of compact telescopic rough-terrain crane, so surviving LW160-1 units are kept running mainly on parts commonality with sibling S6D105-powered Komatsu equipment of the same era rather than on dedicated crane parts stock, which is why documentation and published specifications for this exact model remain thin.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu LW160-1(S/N 1001-UP) specifications
Engine
| Engine model | Komatsu S6D105-1, 6-cylinder, water-cooled diesel, shared with the related LW200L-1 crane. |
| Displacement | Approx. 6.5 L (bore 105 mm x stroke 125 mm, 6 cylinders) - a family-level figure for the S6D105 engine series, not a rating unique to this crane. |
| Gross/net power | Not published for this specific crane application. The S6D105-1 is rated differently across the many Komatsu machines it powers - check the engine nameplate or dealer for the LW160-1 rating. |
| Emissions tier | Not documented for this serial range. Mechanical (non-electronic) fuel system, consistent with this engine's production era; no aftertreatment system referenced in available literature. |
Weights
| Operating weight | Not documented in available literature for S/N 1001-UP. Verify with dealer or nameplate. |
| Shipping weight | Not documented in available literature for S/N 1001-UP. |
| Ground pressure | Not applicable / not published - wheeled rough-terrain crane, no track ground-pressure spec found. |
Dimensions
| Transport length/width/height | Not documented in available literature for S/N 1001-UP. |
| Wheelbase/track gauge | Not documented in available literature for S/N 1001-UP. |
| Ground clearance | Not documented in available literature for S/N 1001-UP. |
Performance
| Travel speed | Not documented in available literature for S/N 1001-UP. |
| Lifting capacity / boom performance | Not documented in available literature for S/N 1001-UP. No load chart located for this exact model/serial range. |
| Gradeability | Not documented in available literature for S/N 1001-UP. |
Service capacities (summary)
| Fuel tank | Not documented in available literature for S/N 1001-UP. |
| Hydraulic system | Not documented in available literature for S/N 1001-UP. |
| Engine oil | Not documented in available literature for S/N 1001-UP. |
| Cooling system | Not documented in available literature for S/N 1001-UP. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
LW160-1(S/N 1001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (oil pan, with filter) | Not documented for this exact serial range — verify with your dealer or the LW160-1 OMM refill table | Komatsu genuine engine oil (EO series). Grade selected by ambient temperature per Komatsu's engine-oil chart for the S6D105/6D105 family: SAE 10W in cold climates, SAE 30 in warm climates, or SAE 15W-40 multigrade as an all-season choice meeting API CD/CE or later diesel service classifications. |
| Cooling system (radiator + block) | Not documented for this exact serial range — verify with your dealer | Komatsu genuine coolant (permanent-type antifreeze/summer coolant), mixed with clean soft water per the ambient-temperature freeze-protection table in the OMM. Avoid straight water for corrosion protection. |
| Fuel tank | Not documented for this exact serial range — verify with your dealer | Diesel fuel; cetane number and grade selected by ambient temperature (No. 1-D for cold climates, No. 2-D for normal/warm climates), per Komatsu's standard fuel guidance. |
| Transmission / torque converter (powershift travel drive) | Not documented for this exact serial range — verify with your dealer | Komatsu genuine powertrain/transmission oil (TO series), viscosity graded by ambient temperature per the OMM chart. |
| Swing (slewing) gear case | Not documented for this exact serial range — verify with your dealer | Komatsu genuine gear oil (TO series) as specified for the swing reduction unit. |
| Front and rear axles / differentials (each) | Not documented for this exact serial range — verify with your dealer | Komatsu genuine axle oil (AXO series), viscosity graded by ambient temperature per the OMM chart. |
| Hydraulic system (tank + circuit, boom/outrigger/swing hydraulics) | Not documented for this exact serial range — verify with your dealer | Komatsu genuine hydraulic oil (HO series), viscosity graded by ambient temperature per the OMM chart. Tank level checked with boom fully retracted and lowered per standard Komatsu crane procedure. |
| Grease points (boom sections, pins, outriggers, slewing ring) | Spec only — no fill volume applies | Komatsu genuine multipurpose grease, NLGI No. 2 lithium-based grease for general chassis/pin points; molybdenum-disulfide (MoS2) grease where specified for high-load pivot pins. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu LW160-1(S/N 1001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the LW160-1(S/N 1001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
The S6D105-1 is a mechanical-injection diesel with no ECM, so there are no electronic fault codes to trend; rely on scheduled oil sampling instead. Pull engine oil, torque-converter/transmission oil, swing gear case oil and hydraulic oil samples at each 500-hour interval and watch for rising metals or coolant contamination. Track torque-converter stall speed over time as an early warning of power-train wear, and log wire rope and boom wear-pad condition at every inspection rather than waiting for a failure.
Corrective & Common Repairs
Common wear points on this powertrain are the swing gear case seals, mechanical swing brake adjustment, and torque-converter transmission linkage. On the crane side, boom telescoping wear pads, extension wire rope, and outrigger cylinder seals see the most repair activity given hydraulic-circuit age. Because there is no diagnostic display, troubleshoot with gauge readings, pressure test points on the hydraulic circuit, and mechanical inspection rather than fault-code lookup.
Overhaul & Rebuild Points
Plan major work around the S6D105-1's top-end (cylinder head, injectors, injection pump timing) and the torque-converter power train, both original mechanical-era designs with long service life when maintained on interval. Boom wear pads, telescoping cylinders, and the swing bearing/gear case are the crane-specific overhaul points; inspect swing gear teeth and bearing bolt torque whenever the power train is opened up, since parts for this crane are sourced mainly through commonality with the S6D105 engine family and the LW200L-1 sibling.
Seasonal & Environment Servicing
Before cold weather, switch to the coolant and engine oil viscosity specified for low ambient temperature and check block heater or glow-aid function, since this mechanical engine has no electronic cold-start assist. Before hot or dusty seasons, service the radiator core, engine air cleaner and hydraulic tank breather more frequently, and check hydraulic oil for heat-related viscosity breakdown. Outrigger pads and boom pins should be inspected for corrosion after wet or coastal operation.
LW160-1(S/N 1001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| 07000-05155 | O-Ring,Hydraulic Oil Filter | Hydraulic service | Check fitment → |
| 01220-40820 | Screw, Filter Mounting | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
LW160-1(S/N 1001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Coolant Temperature Warning Lamp (red, thermometer symbol) | Engine coolant temperature has risen above the safe operating range | Low coolant level, clogged radiator fins, slipping or broken fan belt, faulty thermostat | Stop engine at idle, let cool, check coolant level and radiator/fan belt before restarting |
| Engine Oil Pressure Warning Lamp (red, oil-can symbol) | Engine oil pressure has dropped below the safe minimum | Low oil level, clogged oil filter/strainer, worn oil pump or bearings | Shut engine down immediately, check oil level, do not restart until cause is found |
| Battery/Charge Warning Lamp (red, battery symbol) | Alternator is not charging the battery circuit | Slipping or broken alternator belt, faulty alternator, loose/corroded wiring | Check belt tension and wiring, test alternator output, replace as needed |
| Air Cleaner Restriction Warning Lamp (red/amber, filter symbol) | Intake air filter element is clogged, restricting airflow to the engine | Dust/debris loading on the filter element | Clean or replace the air cleaner element and reset the restriction indicator |
| Hydraulic Oil Temperature Warning Lamp | Hydraulic system oil temperature is above the safe operating range | Extended relief-valve operation, low hydraulic oil level, clogged oil cooler | Stop crane function, idle engine to allow cooling, check hydraulic oil level and cooler fins |
| Anti-Two-Block Alarm (buzzer + red lamp) | Hook block/ball is approaching the boom-tip sheave (over-hoist condition) | Operator hoisting up or retracting/lowering boom too far without lowering the load block | Stop hoist-up and boom-down/retract motion, lower the load block away from the boom head before resuming |
| Overload / Moment Limiter Warning (buzzer + red lamp) | Lifted load is approaching or has reached the rated lifting capacity for the current boom length, angle, and outrigger/counterweight configuration | Load too heavy for the working radius, or outrigger extension/counterweight not set to match the operating condition selected | Stop the load-increasing motion, reduce radius or load, verify outrigger spread and counterweight match the configuration in use |
| Fuel Level Warning Lamp | Fuel tank level has dropped to reserve | Low fuel, or float/sender fault | Refuel; check sender if lamp stays on after refueling |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
LW160-1(S/N 1001-UP) attachments & work tools
Main hook block and auxiliary ball hook
This class of Komatsu rough-terrain crane carries a single main hook block rated near the machine's top lifting capacity, plus a removable ball hook for the auxiliary winch line. Exact hook ratings for this serial range are not published in available sources; confirm the fitted hook set against the load chart in the operator's manual.
Fly jib / stowable jib
Komatsu's LW-series city-class rough-terrain cranes offer a slide-type fly jib carried alongside the base boom section, manually pinned at two or three offset angles rather than hydraulically luffed. Sibling models in the same family use jibs in roughly the 3.5-7m range at 10-ton capacity; exact jib length/offset for this model is not documented and should be verified against the dealer spec sheet.
Boom
Boom is a hydraulic telescopic multi-section design, consistent across Komatsu's LW-series rough-terrain cranes (4 to 5 sections across the 10 to 25 ton bracket of the family). Section count and stowed/extended length specific to this model are not confirmed in available sources and vary by configuration/series.
Outriggers
The LW-series family uses beam-type hydraulic outriggers, described as either H-type or X-type depending on model and series, extended/retracted hydraulically with manual locking pins for stability during lifts. Which outrigger type is fitted to this serial range is not confirmed online; verify with the dealer or operator's manual.
Hydraulic power and winch circuit
A diesel engine drives a gear-pump hydraulic circuit feeding the main and auxiliary winches plus the boom telescoping, luffing, and outrigger cylinders; steering and swing-brake circuits share the same pump set. This model uses a Komatsu S6D105-series diesel, and its hydraulic pump and steering-pump components are shared with the LW200L-1, indicating a common mid-size hydraulic platform within the LW crane range.
Attachment mounting method
As a telescopic crane rather than an excavator, this machine has no excavator-style quick-coupler. Work tools (hook blocks, ball hook, jib) pin directly to the boom head and winch reeving rather than mounting through a bucket-style coupler.
Cab, guarding and factory options
Typical factory options for this crane class include an enclosed operator cab, boom-angle/length indicator, and a load-moment (rated capacity) indicator system tied to the outrigger and boom sensors. Specific factory options equipped on this serial range are not documented in available sources — confirm with the dealer or data plate.
All LW160-1(S/N 1001-UP) assemblies by section
Every catalogued assembly group for the Komatsu LW160-1(S/N 1001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Drive Shaft? Differential? Wheels And Air System
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Air Compressor To Wet Reservoir)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Brake Line) (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 7 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***08 | Nut,(For Russian) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Brake Line) (2/2)
| 01***20 | Bolt,(Without Maintenance Monitor) | 6 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Dry Reservoir To Brake Booster)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Dry Reservoir To Solenoid Valve)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 4 |
| 01***14 | Nut (Itl) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Option Line)
| 07***25 | Gasket (Kit) | 1 |
| 07***08 | Plug,(Without Brake Assistor) | 1 |
| 07***10 | Connector,Pipe | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Reservoir)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***40 | Screw | 2 |
| 01***45 | Screw,(For Tbg/Abe Spec.) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Solenoid Valve To Parking Brake Chamber)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Solenoid Valve To Regulator To Swivel Joint To Brake Booster)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Solenoid Valve To/From Engine Revolution Set Cylinder)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 5 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Solenoid Valve To/From F-R Cylinder)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Solenoid Valve To/From High-Low Cylinder)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Solenoid Valve To/From Transmission Selector Cylinder)
| 01***20 | Bolt,(With Auto Emergency Steering) | 7 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Sub Reservoir To Engine Control Valve To Accelerator Cylinder) (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Sub Reservoir To Engine Control Valve To Accelerator Cylinder) (2/2)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***20 | Bolt,(Without Maintenance Monitor) | 2 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Wet Reservoir To Air Pump)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 04***08 | Clip,(For R.H. Steering) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Wet Reservoir To Dry Reservoir)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Air Piping (Wet Reservoir To Governor)
| 01***75 | Bolt,(For Shipping) | 2 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Axle Housing
| 22***30 | Plug | 4 |
| 22***20 | Stud | 10 |
| 22***10 | Axle Ass'Y,Front | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Brake Piping (Front)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 14 |
| 01***12 | Screw,(With Articulate Indicator) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Brake Piping (Rear)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***12 | Screw,(With Articulate Indicator) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Air Reservoir To Distributor)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Distributor? Center)
| 01***45 | Screw | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
| 08***14 | Band,(For Additional Fuel Strainer) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Distributor? Front? L.H.)
| 01***45 | Screw | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Distributor? Front? R.H.)
| 01***45 | Screw | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Distributor? L.H.)
| 01***45 | Screw | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Central Lubrication Piping (Distributor? Rear? R.H.)
| 01***45 | Screw | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Differential
| 22***10 | Cage Ass'Y | 1 |
| 22***20 | Cover Ass'Y | 1 |
| 22***30 | Carrier Ass'Y | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Final Drive
| 22***60 | Hub Ass'Y | 2 |
| 22***90 | Nut | 2 |
| 22***10 | Shaft | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Knuckle And Tie Rod
| 22***70 | Spindle Ass'Y | 2 |
| 22***80 | Knuckle Ass'Y | 2 |
| 22***40 | Sleeve | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Propeller Shaft (Front)
| 01***38 | Washer,Spring | 8 |
| 22***00 | Propeller Shaft A.,Front | 1 |
| 22***10 | Bolt | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Propeller Shaft (Rear)
| 01***38 | Washer,Spring | 8 |
| 22***10 | Bolt | 8 |
| 22***30 | Cross Pin Ass'Y | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Wheel
| 22***10 | Wheel And Rim Ass'Y | 4 |
| 22***00 | Tire Ass'Y | 1 |
| 22***10 | Tire | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Drive Shaft? Differential? Wheels And Air System : Wheel Brake
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***63 | Washer,Lock | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Engine Related Parts And Elctrical System
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Accelerator Pedal
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Screw | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Air Cleaner Connection
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
| 07***09 | Clamp,(With Cylinder Cover) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Battery
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Boom Angle Sensor
| 01***20 | Screw | 4 |
| 07***60 | O-Ring,Cage? Transfer Gear | 1 |
| 78***00 | Sensor Ass'Y,Boom Angle | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Boom Length Sensor
| 01***12 | Screw | 6 |
| 01***20 | Screw | 2 |
| 01***12 | Screw | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Control Box (1/2)
| 01***10 | Screw | 4 |
| 01***16 | Screw | 4 |
| 01***12 | Screw | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Control Box (2/2)
| 01***10 | Screw | 16 |
| 01***03 | Nut,(With Joy Stick Steering) | 12 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 28 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Boom)
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Emergency Motor)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 23 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Engine And Tachometer)
| 01***10 | Screw,(For Wiper Switch Earth) | 2 |
| 01***13 | Washer,Spring(For Wiper Switch Earth) | 2 |
| 08***25 | Cable | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Front Fuse)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 6 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Front Grille)
| 01***10 | Bolt,(With Auto Emergency Steering) | 5 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 9 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Heater? P.T.O. Outrigger Panel)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***10 | Screw,(For Lighter) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Junction Box)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Outside Outrigger Panel)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Pressure Sensor)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 11 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Rear Fuse)
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 2 |
| 08***19 | Band,(Without Air Conditioner) | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Rear Grille And Rear Steering)
| 01***10 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 14 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Revolving Frame)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 7 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Slip Ring)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***10 | Screw, Mount Wire Assembly | 4 |
| 01***20 | Screw | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Tachograph And Grease Panel)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Electrical System (Torque Converter Lock-Up Solenoid)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 12 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 12 |
| 08***14 | Band,(For Additional Fuel Strainer) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Engine Control Lever
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***45 | Bolt | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Engine Control Linkage (1/2)
| 01***25 | Bolt,(For Automatic) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Engine Control Linkage (2/2)
| 01***25 | Bolt,(For Automatic) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,Stopper | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Engine Mounting Parts
| 01***25 | Bolt | 2 |
| 01***35 | Bolt | 2 |
| 13***70 | Washer | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Exhaust Connection
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 13 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Fuel Tank
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
| 07***12 | Gasket,(Without Air Compressor Type) (K1) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Fuse Box (Lower)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Instrument Panel (Front)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 6 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Instrument Panel (L.H. Lower)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***10 | Screw,(For Lighter) | 10 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 10 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Instrument Panel (L.H. Upper)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***06 | Screw | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Instrument Panel (Outside)
| 01***12 | Bolt,(With Cylinder Cover) | 2 |
| 01***10 | Screw,(For Lighter) | 10 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 10 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Jib Set Switch
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 3 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Junction Box (Cab)
| 01***16 | Bolt (With Air Heater & Conditioner) | 7 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***10 | Screw, Mount Wire Assembly | 24 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Junction Box (Frame)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 12 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Mdt Box (Chassis Side)
| 01***12 | Screw | 16 |
| 01***20 | Screw (Op) | 10 |
| 01***02 | Nut (1) | 16 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Mdt Box (Revolving Side)
| 01***12 | Screw | 12 |
| 01***12 | Screw | 8 |
| 01***02 | Nut (1) | 12 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Over-Winding Detection Switch (Aux Wind)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Screw | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Over-Winding Detection Switch (Main Wind)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Pressure Sensor Box
| 01***16 | Screw | 4 |
| 01***19 | Washer,Spring | 4 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Radiator And Oil Cooler
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 23 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Engine Related Parts And Elctrical System : Regulator Box
| 01***16 | Screw | 4 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 4 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 4 |
Frame And Guard
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Auxiliary Seat
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Car Heater
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 1 |
| 01***25 | Bolt,(For Automatic) | 5 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 13 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Center Fender
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 18 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Engine Hood And Rear Grille
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 24 |
| 01***16 | Screw | 16 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Front Fender
| 01***60 | Bolt,(For Japan And Sweden) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 30 |
| 01***20 | Screw, Filter Mounting | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Front Grille
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Guide Sheave
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 8 |
| 01***42 | Washer,Spring (For Pedal Steering), Washer-Spring | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Main Frame
| 22***00 | Frame Ass'Y | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Marks And Plates (1/2)
| 09***00 | Plate? Caution,Keep Out Of Turning Area | 1 |
| 09***25 | Plate? Caution,(Japanese-English) | 1 |
| 20***90 | Plate? Instruction,Hydraulic Oil | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Marks And Plates (2/2)
| 01***06 | Screw | 4 |
| 09***00 | Plate? Instruction,Fuel | 1 |
| 09***00 | Plate? Safety,Swing Lock Lever | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Mounting Bracket (Battery And Air Cleaner)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 10 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Mounting Bracket (Fuel Tank)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 10 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Mounting Bracket (Hydraulic Tank)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 14 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (1/7)
| 01***10 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***25 | Screw | 1 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (2/7)
| 01***12 | Screw,(Additional Sun Visor) | 2 |
| 01***10 | Screw,(With Air Conditioner) | 4 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (3/7)
| 01***08 | Screw, Terminal | 2 |
| 01***08 | Screw - Clip Mounting | 14 |
| 01***08 | Screw | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (4/7)
| 01***08 | Screw, Terminal | 2 |
| 01***08 | Screw | 6 |
| 01***08 | Screw | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (5/7)
| 01***16 | Screw, Mount Parking Lights | 15 |
| 01***08 | Screw - Clip Mounting | 4 |
| 01***12 | Screw,(With Articulate Indicator) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (6/7)
| 01***12 | Screw,(Additional Sun Visor) | 4 |
| 01***16 | Screw, Mount Parking Lights | 10 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 12 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Operator'S Cab (7/7)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 3 |
| 01***14 | Screw | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Operator'S Seat
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Outrigger
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 16 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Rear Fender
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 42 |
| 01***16 | Screw | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Revolving Frame (1/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 2 |
| 01***40 | Bolt,(With Center Guard) | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Revolving Frame (2/2)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 17 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Suspention
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***85 | Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***40 | Bolt,(With Center Guard) | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Tank Side Cover
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 12 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 24 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 24 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Upper Guard (In Cabin)
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Upper Guard (L.H. Side)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***65 | Bolt,(Except Japan) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Frame And Guard : Upper Guard (R.H. Side)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 10 |
Hydraulic System
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Automatic Brake Cylinder
| 07***85 | O-Ring,(For Snow Removing) | 1 |
| 07***25 | Packing | 1 |
| 07***56 | Seal,Dust (Kit) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Boom Elevate Control Lever
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***40 | Bolt | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Boom Elevate Cylinder
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
| 01***35 | Screw | 2 |
| 01***80 | Bolt | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Boom Telescope Control Lever (Op)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***40 | Bolt | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Boom Telescope Cylinder
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Counter Balance Valve And Shuttle Valve
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
| 01***70 | Bolt, Accumulator Mounting Bracket | 4 |
| 01***18 | Bolt | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Clutch
| 06***06 | Bearing, Ball | 1 |
| 06***07 | Bearing,Ball | 2 |
| 06***08 | Bearing | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Control Valve (Boom) (1/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***20 | Bolt (Itl) | 4 |
| 01***25 | Bolt, Seal Cover Mounting | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Control Valve (Boom) (2/2)
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 1 |
| 07***34 | O-Ring,(F2310-59a0 -4 ) | 1 |
| 70***60 | O-Ring (Itl) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Control Valve (Swing) (2/2)
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 1 |
| 07***34 | O-Ring, O-Ring,Drain Plug? R.H. Half Tank | 1 |
| 70***00 | Valve Ass'Y,Suction | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Control Valve (Winch) (1/3)
| 01***35 | Bolt,(For Position Fixing) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 4 |
| 01***25 | Bolt | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Control Valve (Winch) (2/3)
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
| 01***50 | Bolt,(For Strengthened Cover) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Control Valve (Winch) (3/3)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Control Vlave (Swing) (1/2)
| 01***16 | Bolt (Op) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Accumlator Charge Line) (Pump To Swivel Joint)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***11 | Nut,(With Under Mirror) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Boom Line) (Muffler To Swivel Joint)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Boom Line) (Pump To Muffler)
| 01***45 | Screw | 2 |
| 01***55 | Bolt,(10m) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Charge Valve Line)
| 01***20 | Bolt,(With Auto Emergency Steering) | 5 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 5 |
| 07***34 | O-Ring,(For Without Brake Assistor) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Control Valve To Boom Elevate Cylinder)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 1 |
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Control Valve To Boom Telescope Cylinder)
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Control Valve To Swivel Joint) (1/2)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
| 04***15 | Ring, Snap | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Control Valve To Swivel Joint) (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Control Valve To Winch Motor)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Emergency Steering)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Motor Drain)
| 04***08 | Clip,(With Cylinder Cover) | 1 |
| 22***10 | Tee | 1 |
| 22***20 | Tee | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Outrigger) (1/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 21 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Outrigger) (2/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***45 | Bolt | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Outrigger? Front)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***25 | Bolt,Without Revolution Sensor | 6 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Outrigger? Rear L.H.)
| 01***25 | Bolt,Without Revolution Sensor | 13 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Outrigger? Rear R.H.)
| 01***25 | Bolt,Without Revolution Sensor | 14 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Pressure Gauge)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 3 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Rear Steering Lock)
| 01***16 | Bolt (With Air Heater & Conditioner) | 5 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Selector Valve To Winch Brake Cylinder)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Selector Valve To Winch Swivel Joint)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,Without Revolution Sensor | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Steering And Swing Line) (Muffler To Swivel Joint)
| 01***40 | Bolt,(With Air Conditioner) | 2 |
| 01***45 | Screw | 2 |
| 01***50 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Steering And Swing Line) (Pump To Muffler)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***40 | Bolt,(With Air Conditioner) | 2 |
| 01***45 | Screw | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Steering And Swing Line) (Releif Valve To Control Valve)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Steering And Swing Line) (Swivel Joint To Priority Valve)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 4 |
| 01***08 | Nut,(For Russian) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Steering Valve To Swivel Joint)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Steering? Front)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Steering? Rear)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***09 | Nut,(With Body Positioner) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Suspention Lock? Front)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Suspention Lock? Rear)
| 01***16 | Bolt (With Air Heater & Conditioner) | 5 |
| 01***30 | Bolt,(For Mechanical Governor) | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Swivel Joint To Control Valve)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 16 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Swivel Joint To Tank)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Tank To Pump)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Valve Drain)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Winch Line) (Pump To Swivel Joint)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Winch Motor To Accumulator To Selector Valve) (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 04***08 | Clip | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Piping (Winch Motor To Accumulator To Selector Valve) (2/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Pump (Accumulater Charge)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 8 |
| 07***42 | O-Ring, Between Tube And Divider Valve | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Pump (Boom)
| 04***18 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y | 1 |
| 70***10 | Seal, Oil | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Pump (Emergency)
| 04***15 | Ring, Snap | 1 |
| 70***10 | Seal, Oil | 1 |
| 70***10 | Pump Ass'Y | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Pump (Swing And Steering)
| 04***12 | Ring, Snap | 1 |
| 04***18 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Pump (Transmission)
| 04***18 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y | 1 |
| 70***10 | Seal, Oil | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Pump (Winch)
| 04***20 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y | 1 |
| 70***10 | Shaft Seal | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Hydraulic Tank
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 16 |
| 01***16 | Bolt,(Without Cab) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 16 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Outrigger Jack Cylinder
| 01***40 | Bolt,(With Air Conditioner) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Outrigger Slide Cylinder
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 07***75 | O-Ring,Cylinder Head | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Relief Valve (For Swing)
| 01***08 | Nut (Op) | 1 |
| 07***10 | O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010 | 1 |
| 07***11 | O-Ring (Kit) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Steering Cylinder
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***11 | Nut,(With Under Mirror) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Suspention Lock Cylinder
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 2 |
| 04***20 | Ring, Snap | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Swing And Boom Elevate Control Lever (Op)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Swing And Boom Telescope Control Lever
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Winch Brake Linkage
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***40 | Bolt | 6 |
| 01***10 | Nut,L.H. Thread | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Winch Brake Pedal
| 01***35 | Bolt,(For Position Fixing) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Winch Clutch Control Lever
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Winch Control Lever
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***03 | Nut; Was 01508-20603, Nut? L.H. Thread,L.H. Thread | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Hydraulic System : Winch Motor
| 01***25 | Bolt | 4 |
| 07***35 | O-Ring,(F4350-61a0 -32 ) | 2 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 2 |
Optional Parts
Komatsu : Lw160-1(S/N 1001-Up) : Optional Parts : Fuel Filter (For A Type Heavy Oil)
| 07***70 | Hose,Fuel | 1 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
| 22***10 | Bracket | 1 |
Steering And Swing Systems
Komatsu : Lw160-1(S/N 1001-Up) : Steering And Swing Systems : Brake Valve (Swing Motor)
| 22***20 | Valve Ass'Y | 1 |
| 22***60 | Washer | 6 |
| 22***80 | Plate | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Steering And Swing Systems : Rear Steering Lock
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Bolt,(For Tree Pusher) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Steering And Swing Systems : Steering Handle
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 3 |
| 01***08 | Screw, Terminal | 2 |
| 01***10 | Screw,(For Lighter) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Steering And Swing Systems : Swing Brake Lever And Piping
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Steering And Swing Systems : Swing Circle
| 04***42 | Pin,Dowel? Gear Case Cover | 3 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 4 |
| 22***01 | Circle Ass'Y,Swing | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Steering And Swing Systems : Swing Machinery
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Steering And Swing Systems : Swing Motor (1/2)
| 22***10 | Motor Ass'Y | 1 |
| 22***10 | Motor Ass'Y | 1 |
| 22***50 | Washer | 5 |
Komatsu : Lw160-1(S/N 1001-Up) : Steering And Swing Systems : Swing Motor (2/2)
| 22***10 | Casing | 1 |
| 22***20 | Casing | 1 |
| 22***30 | Shaft | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Steering And Swing Systems : Swivel Joint
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***75 | Bolt, Tube Mounting | 5 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 5 |
Tool
Komatsu : Lw160-1(S/N 1001-Up) : Tool : Tool
| 07***90 | Tube | 1 |
| 07***00 | Pump,Grease | 1 |
| 07***00 | Pump,Grease | 1 |
Torque Convertor And Transmission
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : 1st Housing
| 01***30 | Bolt,Radio Controlled Slag Handling | 6 |
| 01***40 | Bolt,(With Service Valve R.H.) | 12 |
| 01***36 | Washer,Radio Controlled Slag Handling | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : 2nd Housing
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 4 |
| 04***16 | Pin, Spring | 3 |
| 09***20 | Washer,Thrust | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Damper
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***85 | Bolt,(For 2nd Travel Speed) (Op) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 24 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Forward And 3rd Housing
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
| 04***16 | Pin, Spring | 3 |
| 04***18 | Ring,Snap | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : High-Low Shift Fork
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Parking Brake And Linkage
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Line Oil Piping (Oil Cooler)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Line Oil Piping (P.T.O. Clutch)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***80 | Bolt,(For Long Lever Control) | 3 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Line Oil Piping (Transmission) (1/2)
| 01***40 | Bolt,(With Air Conditioner) | 2 |
| 01***50 | Bolt (Kit) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Line Oil Piping (Transmission) (2/2)
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Take Off (1/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Power Take Off (2/2)
| 01***60 | Bolt,(For Japan And Sweden) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Reverse Housing
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Torque Converter Housing
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 20 |
| 01***75 | Bolt | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Torque Converter Pump? Turbine And Stator
| 01***25 | Bolt, Mount Cover | 14 |
| 01***35 | Bolt, M10x1.5x35 | 8 |
| 01***80 | Bolt | 24 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Torque Converter Valve
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***45 | Bolt, Mount Body To Block | 4 |
| 01***08 | Screw | 3 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transfer Case
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 14 |
| 01***55 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transfer Output Shaft
| 01***30 | Bolt | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Case
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***55 | Bolt,(Tree Pusher Dozer) | 4 |
| 01***50 | Bolt,(Without R.O.P.S.) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Lever
| 01***10 | Bolt,(With Auto Emergency Steering) | 7 |
| 01***25 | Bolt,Without Revolution Sensor | 5 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Linkage (1/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Linkage (2/2)
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Valve (1/2)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 7 |
| 01***55 | Bolt,(For Trimming Dozer) | 7 |
| 01***65 | Bolt,(For Alternator Bracket Mount) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Control Valve (2/2)
| 01***80 | Bolt,(See Fig.0131) | 4 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 10 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Mounting Parts
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 16 |
| 01***15 | Bolt | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Transmission Oil Filter
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 3 |
| 07***25 | O-Ring,Injection Pump Mounting | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Torque Convertor And Transmission : Universal Joint
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
| 07***45 | Bolt,(Tree Pusher Dozer) | 8 |
| 22***00 | Universal Joint A | 1 |
Work Equipment
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : 1st Boom (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : 1st Boom (2/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : 2nd Boom
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : 3rd Boom
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : Hook (Boom)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(For Rubber Shoe) | 16 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : Hook (Jib)
| 01***55 | Bolt | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : Jib
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***80 | Bolt, Mount Tubes To Switch And Work Pumps | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : Jib Mounting Parts
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 8 |
| 01***60 | Bolt | 6 |
| 01***70 | Screw | 2 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : Jib Set Lever
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 10 |
| 01***60 | Bolt | 2 |
| 01***07 | Nut,L.H. Thread (D31s) | 6 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : Single Top (Op)(#1004-)
| 01***12 | Bolt,(With Cylinder Cover) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 1 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : Winch (1/2)
| 01***25 | Bolt,Without Revolution Sensor | 10 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 26 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : Winch (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 24 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : Lw160-1(S/N 1001-Up) : Work Equipment : Winch Clutch
| 01***48 | Washer,Spring (For Slag Handling), Washer-Spring | 2 |
| 22***20 | Clutch Ass'Y | 2 |
| 23***10 | Plate | 1 |
Frequently asked questions
What engine does the Komatsu LW160-1 (S/N 1001-UP) use?
It is powered by the Komatsu S6D105-1, a six-cylinder mechanical-injection diesel from the pre-electronic-control era. This is the same engine family fitted to the related LW200L-1 crane.
What is the operating weight of the Komatsu LW160-1 (S/N 1001-UP)?
An exact operating weight for this specific serial range is not publicly documented. Confirm the figure from the machine's data plate or through a Komatsu dealer rather than assuming a number from a different LW-series model.
What replaced the Komatsu LW160-1 in Komatsu's lineup?
No confirmed direct successor model is documented for this serial range. Komatsu discontinued production of this class of compact telescopic rough-terrain crane, and the closest contemporary machine is the LW200L-1, which shares the same engine and much of the hydraulic and power-train architecture rather than being a formal replacement.
What LW160-1(S/N 1001-UP) owners discuss
How does the powershift travel drive on the LW160-1 behave when it's worn or low on fluid?
This crane uses a torque-converter powershift drivetrain, not a manual clutch. Owners of this class of rough-terrain crane report the classic torque-converter symptoms when transmission oil is low, contaminated, or the converter is worn: sluggish takeoff, a flare or slip feeling between gear changes, and increased heat in the transmission cooler circuit under load or on grade. A cold, thick, or low-level fill also shows up as delayed direction-shift response on the travel lever. Fluid condition and level are the first checks before assuming a converter or clutch pack fault. This is a drivetrain safety item on a crane that travels loaded — have your dealer verify condition before returning it to service.
What's the typical hydraulic behavior owners report with the boom and outrigger circuits on machines this size and era?
For rough-terrain telescopic cranes of this generation, the recurring field complaint is slow, jerky, or uneven boom extension/retraction tied to worn telescoping-cylinder seals, internal bypass, or aerated/contaminated hydraulic oil rather than pump failure outright. Weeping or seepage at the outrigger cylinder rod is treated as a real fault, not cosmetic — it means the cylinder isn't holding its load and the outrigger can settle under the crane. A crane that needs its outriggers re-set or re-pumped repeatedly during a lift has a leaking holding/block valve, which is a known failure point on this class of machine. Boom and outrigger hydraulics are safety-critical for stability during a lift — have your dealer verify cylinder and holding-valve integrity.
Are there known quirks with the S6D105-1 engine in this crane?
The S6D105-1 fitted to this crane is a mechanical, pre-electronic diesel: fuel delivery runs through a jerk-type injection pump and mechanical governor, with no ECM, sensors, or fault codes to read. Field reports on this engine family describe it as generally long-lived with routine maintenance, but injection pump and governor linkage wear over time shows up as rough idle, hunting RPM, or gradual power loss — diagnosed by mechanical injection-pump service rather than a scan tool. Cold starts on a mechanical engine like this are more sensitive to battery condition, glow/intake-heater function, and fuel quality (wax/gelling in cold weather) than on a modern electronic engine. Smoke color at startup and under load (blue, white, or black) is still the primary diagnostic cue mechanics use on this generation of engine.
What undercarriage and axle wear patterns show up on rough-terrain cranes like this after years of site use?
As a wheeled (not tracked) rough-terrain crane, wear concentrates in the tires, steering linkage, and axle/differential sets rather than track chain or rollers. Owners of this class of machine report uneven or scrubbed tire wear from tight-radius steering and off-road travel, and king-pin/steering-linkage looseness from repeated hard cornering with a loaded boom. Front and rear axle differentials and the oscillating axle pivot are recurring grease/oil-level check points — running them low accelerates gear and bearing wear. None of this is unique to the LW160-1; it's the standard wear pattern for any rough-terrain wheel crane of this size and era, and it should be confirmed against this specific machine's service history rather than assumed.
What electrical or sensor issues come up on a machine from this engine/control era?
This is a mechanical-era machine with a simple 24V charging and starting circuit, gauges, and warning lamps — there's no ECM-driven diagnostic system to fail. The electrical complaints that surface on equipment of this vintage are the basic ones: corroded or loose battery and ground connections causing intermittent no-start or gauge misreads, a tired alternator or regulator giving a slow charge fault, and worn starter solenoid contacts. Because there's no fault-code memory, intermittent electrical gremlins are chased with a multimeter and wiring-diagram checks at the battery, ground straps, and starter circuit first, rather than a scan tool.
Is the swing (slewing) brake and gear on this crane a common wear item?
On rough-terrain cranes with a mechanical swing brake and reduction gear case, the maintenance items owners flag are gear-case oil level/condition and brake band or disc wear from repeated engagement during slewing under load. Symptoms of a worn or leaking swing system include grinding or clunking noise on rotation, drift when the brake is set, or a spongy feel to swing control. Because uncontrolled slew with a loaded boom is a tip-over and pinch-point hazard, swing brake holding force and gear-case condition are safety-critical items — have your dealer verify function before the crane goes back into lifting service.
What should I check before buying a used Komatsu LW160-1 (S/N 1001-UP)?
Because this exact model is thinly documented publicly (no widely available factory brochure or load chart), lean on physical inspection and paper trail over published specs. Confirm the machine is genuinely S/N 1001-UP and matches its data plate to the engine serial (the S6D105-1 six-cylinder diesel is the correct engine for this crane — verify it hasn't been swapped for a mismatched unit). Check telescoping-cylinder rods and outrigger cylinders for seepage or pitting, cycle the boom through full extend/retract and outrigger set/stow to catch slow or jerky hydraulic response, and inspect the powershift transmission for slip or delayed shifts. Look at tire wear pattern and steering-linkage play, and pull axle/differential and swing gear-case oil for metal contamination. Ask for the load chart and any structural/wire-rope inspection or certification records — a crane with no current inspection paperwork needs a full third-party inspection before it's put back into lifting service, and safety-critical items (boom, outriggers, swing brake, hoist rope and hook) should be verified by your dealer or a certified crane inspector regardless of how the machine looks cosmetically.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific LW160-1(S/N 1001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.