Komatsudump truck(no series)
Komatsu HD605-7E0(S/N 8001-UP (ecot3; Overseas Version))
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu HD605-7E0 (S/N 8001-up, ecot3, Overseas Version) is a large rigid-frame, mechanical-drive off-highway dump truck built for quarry, aggregate and mine haul-road service, sized in the roughly 55-63 tonne (61-69 US ton) payload class depending on configuration and body fit. It is powered by the Komatsu SAA6D170E-5 diesel, a water-cooled, turbocharged, air-to-air aftercooled six-cylinder engine that retains cooled EGR to meet ecot3/EPA Tier 3/EU Stage IIIA emissions, rated at roughly 551 kW (739 HP) gross and 533 kW (715 HP) net at 2,000 rpm, driving through a K-ATOMICS 7-speed fully automatic transmission with ARSC hydraulic retarder control. Maximum gross vehicle weight is about 110,180 kg (242,900 lb), with a 40.0 m3 (52.3 yd3) heaped dump body as the baseline offering; this exact serial range is documented in Komatsu's factory shop manual for the ecot3 HD605-7E0 platform. It sits in the -7-generation lineage that followed the earlier HD605-5, alongside sibling variants HD605-7 and the EGR-delete HD605-7R built for markets with different fuel-quality or emissions requirements, before Komatsu moved the platform forward to the HD605-8/HD605-8E0 and, later, the HD605-10.
Across HD605 generations the biggest change has been emissions strategy and the resulting engine architecture: the HD605-7E0 ("Overseas Version") kept a cooled-EGR ecot3 engine for regions requiring it, while the parallel HD605-7R dropped EGR for markets that could not support it, and the later -8 series moved to the more powerful SAA6D170E-7 engine (reported around 578 kW/775 HP) before the -10 series pushed output higher again with lighter, higher-strength steel construction. For today's used-equipment and parts market, this matters because a large population of ecot3-era HD605-7E0 trucks (shared shop-manual coverage with the HD465-7E0 platform) is now aging out of first-life mining fleets into second-life quarry, aggregate and infrastructure hauling, driving steady demand for driveline, hydro-pneumatic suspension, hoist/steering hydraulic, and wet-brake components as owners rebuild rather than replace these trucks, even as Komatsu's current-production focus has shifted to the -8 and -10 generations.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) specifications
Engine
| Engine model | Komatsu SAA6D170E-5 (Ecot3 generation); S/N 8001-10731 Ecot3 parts listing shows this variant; SAA6D170E-3 noted in one source |
| Gross power | 551 kW (739 HP) at 2,000 rpm, SAE J1995 gross |
| Net power | 533 kW (715 HP) at 2,000 rpm, ISO 9249 / SAE J1349 net |
| Displacement | 23.15 L (1,412.7 cu in) |
| Cylinders / configuration | 6-cylinder, water-cooled 4-cycle diesel, turbocharged with air-to-air aftercooling and cooled EGR |
| Max torque | Approx. 3,325 N·m (339 kgf·m / 2,452 lb-ft), as reported on aggregator spec sheets |
| Emissions tier | Ecot3 electronically controlled engine meeting EPA Tier 3 and EU Stage IIIA; features high-pressure common rail injection, cooled EGR, and NOx/PM/fuel-consumption reduction systems |
Weights
| Maximum gross vehicle weight (operating weight) | 110,180 kg (242,900 lb) |
| Empty/shipping weight | Approx. 45.9–46.2 t (101,190–101,854 lb); sources vary slightly on this figure |
| Rated payload | Reported as either 55 t (61 US ton) on the OEM brochure/aggregator sheets or 63 t (69.4 US ton) on Komatsu regional product pages — varies by source/configuration; treat as a range |
| Ground pressure | Not published in available sources |
Dimensions
| Overall/transport length | 9.36 m (30.7 ft) |
| Overall/transport width (over tires) | 4.27–4.6 m (14.0–13.9 ft); minor variance between aggregator and Komatsu regional figures |
| Overall height (to cab top) | 4.4–4.42 m (14.44 ft) |
| Height at full dump | 8.81 m (28.1–28.9 ft) |
| Wheelbase | 4.30 m (14.10–14.11 ft) |
| Turning radius (outside, centre front tire) | 8.5 m (27 ft 11 in) |
| Ground clearance / track gauge | Not published in available public sources |
Performance
| Maximum travel speed | 70 km/h (43.5 mph) |
| Dumping angle | 48 degrees |
| Transmission | Fully automatic K-ATOMiCS 7-speed planetary transmission with torque converter |
| Braking/retarding | Hydraulically controlled, oil-bath multiple-disc brakes and retarder, with Automatic Retarder Speed Control (ARSC) |
| Gradeability | Not published in available public sources |
Service capacities (summary)
| Fuel tank | 780 L (206.1 US gal) |
| Hydraulic system (steering/hoist) | Approx. 122 L (32.2 US gal) |
| Engine oil | Reported between 57.2 L and 79.9 L (15.1–21.1 US gal) across sources — varies by source, treat as a range |
| Torque converter / transmission oil | Approx. 215 L (56.8 US gal), per aggregator spec sheet (listed as combined torque converter/transmission cooling capacity) |
| Engine cooling system (coolant) | Not independently published in available sources |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (incl. oil filter) - Komatsu SAA6D170E-5 ecot3 diesel, Tier 3/EU Stage 3A | 80 L (21.1 US gal) per Komatsu official HD605-7E0 spec sheet; HD605-7 lists 57.2 L (15.1 US gal) — configuration variance | Komatsu genuine engine oil - EO10W-30DH or EO15W-40DH conventional diesel engine oil, or EOS0W-30 / EOS5W-40 synthetic (OMM notes the EOS grades are the most suitable oils, requiring HTHS viscosity of 3.5 mPa-s or greater at 150C); grade is selected from Komatsu's ambient-temperature use chart, with multigrade oil required below 0C (32F) and a Komatsu distributor consult recommended below -20C (-4F). Oil/filter change interval is tied to fuel sulfur content per the OMM: up to 500 hours below 0.2% sulfur, 250 hours for 0.2-0.5% sulfur, and fuel above 0.5% sulfur is not recommended |
| Cooling system (radiator / engine coolant circuit) | Not separately published in the Komatsu spec sheet/brochure excerpts located for this model - the brochure's refill-capacity table does not break out a stand-alone radiator/coolant volume (it lists only a combined 215 L torque converter/transmission/retarder-cooling figure); consult the OMM section "Recommended Fuel, Coolant and Lubricant" or a Komatsu distributor for the exact radiator fill volume | Komatsu genuine AF-NAC super coolant - an ethylene-glycol-based coolant supplied pre-mixed at roughly 35/65 concentration, meeting ASTM D3306 and JIS K2234; OMM specifies year-round use and warns against mixing coolant types, plus a coolant-temperature alarm/light is fitted |
| Fuel tank | 780 L (206.1 US gal) | Diesel fuel; OMM ties the engine-oil change interval to fuel sulfur content - below 0.2% sulfur allows the standard 500-hour interval, 0.2-0.5% sulfur halves it to 250 hours, and fuel above 0.5% sulfur is not recommended for this engine |
| Torque converter, transmission case and retarder-cooling circuit (combined) | 215 L (56.8 US gal) | Komatsu genuine powertrain/transmission oil - TO10 or TO30 series selected per the OMM ambient-temperature chart; this circuit lubricates and cools the 7-speed K-ATOMiCS automatic transmission and the wet multiple-disc brake/retarder |
| Differential (axle housing) | 95 L (25.1 US gal) | Komatsu genuine axle gear oil, AXO80 series (SAE 80W-range gear oil, API GL-4/GL-5 quality per OMM chart) |
| Final drives (total, both sides) | 42 L (11.1 US gal) | Komatsu genuine axle/final-drive oil, same AXO80 specification used in the differential per the OMM |
| Hydraulic system (tank and circuit, incl. hoist and steering) | 122 L (32.2 US gal) | Komatsu genuine hydraulic oil, HO46-HE or the viscosity grade selected from the OMM's ambient-temperature chart; this circuit supplies the dump-body hoist cylinders and power steering |
| Suspension cylinders (front and rear, total) | 55.6 L (14.7 US gal) | Komatsu genuine hydraulic oil (same HO series as the main hydraulic system), charged with nitrogen gas per the OMM suspension-service procedure |
| Grease (centralized auto-greasing system and manual points) | Not a fluid-fill volume - applied per the grease-point/interval schedule in the OMM rather than a system capacity | Komatsu genuine G2-LI lithium EP multipurpose grease, meeting Komatsu's internal KES specification; distributed via the machine's centralized auto-greasing system |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) beyond the schedule
Predictive Maintenance & Fluid Analysis
Run Komatsu Oil and Wear Analysis (KOWA)-style sampling on the SAA6D170E-5 engine oil, K-ATOMICS transmission/torque-converter oil, differential and final-drive case oil, and the combined steering/hoist hydraulic tank to trend wear metals before failure. Because this ecot3 build retains cooled EGR (unlike the 7R variant), watch coolant and oil samples for soot loading and EGR cooler fouling. Track hydro-pneumatic suspension accumulator nitrogen pre-charge and front suspension cylinder oil condition alongside routine sampling.
Corrective & Common Repairs
Typical corrective work on this truck centers on the EGR cooler and valve (soot fouling from the retained-EGR ecot3 engine), turbocharger/aftercooler servicing, K-ATOMICS transmission valve body and cooling-oil filter faults, ARSC retarder disc wear, front disc brake caliper and pad replacement, hoist cylinder packing leaks, and steering cylinder seal renewal. Accumulator gas recharge and hydro-pneumatic suspension cylinder reseals are frequent fixes given the truck's independent front suspension design and heavy cyclic haul-road loading.
Overhaul & Rebuild Points
Major rebuild points on the HD605-7E0 include SAA6D170E-5 top-end overhaul (liners, pistons, injectors) guided by KOWA trend data, K-ATOMICS transmission clutch-pack and torque-converter rebuilds, front and rear final-drive planetary gear and wheel-bearing rebuilds identified through the 2000-hour bearing checks, hydro-pneumatic suspension strut rebuilds, and rear wet-brake disc-pack overhauls. High-tensile steel frame and box-section cross-members should be inspected for fatigue cracking given sustained heavy-payload cycling.
Seasonal & Environmental Servicing
As an overseas-market ecot3 unit often run in hot, dusty quarry or tropical conditions, prioritize frequent air-cleaner element service and radiator/aftercooler fin cleaning to protect the SAA6D170E-5, plus closer EGR cooler fouling checks in dusty environments. In cold climates, verify K-ATOMICS transmission oil viscosity grade and hydro-pneumatic suspension nitrogen charge before cold starts, and monitor fuel quality/sulfur content, since it directly affects the EGR system's service life on this cooled-EGR-equipped engine.
HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 6217-71-6470 | Plate? Caution,Fuel Filter | Fuel system service | Check fitment → |
| 6217-71-6480 | Plate,Fuel Filter | Fuel system service | Check fitment → |
| 6217-71-6510 | Plate,Fuel Filter | Fuel system service | Check fitment → |
| 6217-71-6630 | Plate,Fuel Filter | Fuel system service | Check fitment → |
| 09637-30163 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| B@BCNS | Engine coolant overheating (monitor system detects coolant temperature above the normal operating threshold) | Actual coolant overheating from low coolant level, blocked or dirty radiator, fan drive/belt fault, or thermostat malfunction, or a defective coolant temperature sensor/monitor circuit | Stop and idle the engine, check coolant level and radiator fins for blockage, verify fan and belt condition, and inspect the coolant temperature sensor circuit if overheating is not confirmed before restarting |
| B@BAZK | Engine oil level too low (detected by the oil level switch when the starting switch is ON but engine not running) | Oil consumption, external leak, or a defective engine oil level switch/monitor circuit | Shut down engine, check dipstick level, inspect for leaks and top up with specified oil before restart; if level is normal, inspect the oil level switch wiring |
| B@BCZK | Radiator (sub-tank) coolant level low, detected by the coolant level switch when the starting switch is ON but engine not running | Coolant leak in radiator, hoses, or engine, or a defective sub-tank coolant level switch/monitor circuit | Check sub-tank and radiator coolant level, inspect for external leaks, refill with specified coolant, and inspect the level switch wiring if level reads normal |
| B@BFZK | Fuel level low, per the fuel level monitor circuit | Low fuel in tank or a faulty fuel level sensor/monitor circuit | Check the fuel gauge against physical tank level and refuel; if the gauge disagrees with actual level, inspect fuel level sensor wiring |
| DGT4KA | Exhaust gas temperature sensor (front): disconnection | Open circuit or disconnected connector in the front exhaust gas temperature sensor harness feeding the engine controller | Inspect sensor connector and wiring for damage or corrosion, reseat or repair connections, then clear and recheck the code |
| DGT5KB | Exhaust gas temperature sensor (rear): short circuit | Shorted wiring or failed sensor element in the rear exhaust gas temperature circuit | Check sensor wiring for chafing/short to ground or power, test sensor resistance against specification, and replace sensor if out of range |
| CA234 | Engine overspeed: engine speed exceeded the normal operating range | Excessive downhill/overrun speed, throttle linkage or governor issue, or transmission downshift at high speed; the engine controller limits fuel injection until speed drops back into range | Reduce engine speed immediately, review operating practice on grades, inspect throttle and governor linkage, and check for other related fault codes; have the engine controller diagnosed if no operational cause is found |
| CA115 | Engine speed sensor (Ne) and backup speed sensor both abnormal, which can cause the engine to stop and prevent restart | Faulty, misaligned, or disconnected primary or backup engine speed sensor, damaged wiring/connector, or defective engine controller | Inspect sensor mounting gap and connectors, check wiring continuity, and replace the faulty speed sensor as needed |
| DB1RKR | CAN communication abnormality with the retarder controller (communication disabled) | Damaged CAN bus wiring/connector, retarder controller power supply fault, or controller failure | Check retarder controller power and ground connections and CAN harness for damage, then verify with diagnostic tool before replacing the controller |
| 15G0MW | Reverse (R) clutch slipping in the transmission | Low transmission oil level/pressure, worn clutch pack, or faulty clutch fill solenoid | Check transmission oil level and pressure first, then inspect the reverse clutch solenoid and clutch pack condition |
| DDTNKA | Reverse (R) clutch fill (pressure) switch circuit: disconnection | Disconnected connector or open wiring at the reverse clutch fill pressure switch | Inspect the clutch fill switch connector and harness for an open circuit, repair or replace, and clear the code to confirm resolution |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) attachments & work tools
Dump body / vessel configuration
Standard body is a V-shape, high-tensile-steel dump vessel with heaped (SAE 2:1) capacity of about 40 m3 (52.3 yd3); struck capacity is lower and varies by configuration. An optional reinforced body with a spill guard along the top edges is offered for rock/aggregate service to reduce material loss and edge wear. This is a rigid-frame haul truck, so there is no interchangeable bucket/coupler system as on excavators or wheel loaders.
Hoist and body-mounting system
The dump body is frame-mounted on a rear pivot pin and raised/lowered by hydraulic hoist cylinders sharing a common steering/hoist hydraulic tank and pump circuit rather than any quick-coupler. No auxiliary hydraulic 'work tool' kit is fitted or needed since the body itself is the only hydraulically actuated implement on this model.
Tires / wheel package
Factory-standard fitment across the HD605-5/-7/-7E0/-8 size class is radial 24.00R35 tubeless tires; sources consistently cross-verify this size for the -7E0. Alternate tread/ply specifications exist for quarry vs. mining duty cycles, but this varies by configuration and dealer region rather than being a distinct model option.
Traction and braking assist options
Optional Automatic Spin Regulator (ASR) provides electronic traction control, and an optional Anti-Skid Brake System (ABS) is available per the shop/operation manual covering this exact S/N 8001-up ecot3 unit. Retardation is provided by the standard oil-cooled, multiple-disc rear brakes acting as a service retarder, not a separate bolt-on attachment.
Payload and fleet-monitoring electronics
Optional factory electronics include a Vehicle Health Monitoring System (VHMS) and KOMTRAX Plus telematics, plus a payload-weighing option offered in two forms: a KOMTRAX Plus built-in payload meter or a card-type Payload Meter II. A tachograph and a dumping counter are also listed as installable options in the machine's own operation and maintenance manual.
Operator cab and comfort options
Documented cab-level options for this exact ecot3/8001-up unit include an air-suspension operator seat, a rear-view monitor/camera, and an external-power-source electric cab heater for cold-climate use. A battery isolator switch is also listed as an installable option in the same manual.
Maintenance and guarding accessories
Centralized (automatic) chassis lubrication meter/control kits are offered by lubrication-equipment suppliers as add-on kits for this HD605 haul-truck platform to reduce manual greasing points. Body spill guards, as noted above, are the primary factory guarding option; no separate ROPS/FOPS attachment options were verified beyond the cab structure itself.
All HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) assemblies by section
Every catalogued assembly group for the Komatsu HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air System
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Air System : Auto Suspension Piping (Solenoid Valve And Related Parts)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***75 | Bolt (M10-1.50x75) | 3 |
| 01***45 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Air System : Auto Suspension Piping (Solenoid Valve And Related Parts)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***75 | Bolt (M10-1.50x75) | 3 |
| 01***45 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Air System : Auto Suspension Piping (Support Piping)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 10 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Air System : Auto Suspension Piping (Support Piping)(#8001-10270)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt?Sems | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Air System : Auto Suspension Piping (Suspention Less)(#8001-10270)
| 07***23 | O-Ring,Plug | 16 |
| 07***09 | Plug,(For 2-Actuater Attachment) | 16 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Air System : Auto Suspension Piping (Transmission Piping)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Air System : Auto Suspension Piping (Transmission Piping)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 3 |
Body
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body
| 56***02 | Body Sub Ass'Y | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (300mm Spill Guard)
| 56***10 | Guard (Welded) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Auto Lubrication)
| 01***16 | Seat,(For Desiccant Type) (Welded) | 6 |
| 28***20 | Boss (Welded) | 2 |
| 56***80 | Seat (Welded) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Bolt On Type Guard)
| 56***00 | Body Sub Ass'Y | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Bolt On Type Guard) (150mm Spill Guard)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 20 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 28 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Bolt On Type Guard) (300mm Spill Guard)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 32 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 44 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Bolt On Type Guard) (Auto Lubrication)
| 01***16 | Seat,(For Desiccant Type) (Welded) | 6 |
| 28***20 | Boss (Welded) | 2 |
| 56***80 | Seat (Welded) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Bolt On Type Guard) (Cab And Tire Guard)
| 01***35 | Capscrew - M14 (1)/(2) | 32 |
| 01***40 | Capscrew | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 40 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Bolt On Type Guard) (Exhaust Box)
| 56***21 | Plate (Welded) | 1 |
| 56***40 | Plate (Welded) | 4 |
| 56***30 | Box (Welded) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Bolt On Type Guard) (Heating Less)
| 56***21 | Plate (Welded) | 1 |
| 56***30 | Plate (Welded) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Bolt On Type Guard) (Platform Guard)
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***40 | Capscrew | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Bolt On Type Guard) (Related Parts)
| 01***10 | Capscrew | 6 |
| 01***16 | Nut - M20 | 6 |
| 01***60 | Flat Washer - M20 (Hardened) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Heating Less)
| 56***21 | Plate (Welded) | 1 |
| 56***30 | Plate (Welded) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Platform Guard)
| 56***30 | Guard (Welded) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body (Related Parts)
| 01***10 | Capscrew | 6 |
| 01***16 | Nut - M20 | 6 |
| 01***60 | Flat Washer - M20 (Hardened) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Body Accessory And Parts
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 14 |
| 01***30 | Bolt - M14 X 30lg | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Exhaust Box(#10271-)
| 56***40 | Plate (Welded) | 4 |
| 56***30 | Box (Welded) | 1 |
| 56***50 | Plate (Welded) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Exhaust Box(#8001-10270)
| 01***11 | Nut (Welded) | 6 |
| 56***50 | Spring | 3 |
| 56***70 | Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Hoist Cylinder (L.H.)(#10271-)
| 01***45 | Screw | 4 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Hoist Cylinder (R.H.)(#10271-)
| 01***45 | Screw | 4 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Hoist Cylinder(#8001-10270)
| ((***)) | Cylinder Ass'Y | 1 |
| (7***0) | Cylinder Ass'Y,(Final Coating) | 2 |
| (7***1) | Cylinder Ass'Y,(Final Coating) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Platform Guard
| 56***30 | Guard (Welded) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Body : Spill Guard 300mm
| 56***10 | Guard (Welded) | 1 |
Cooling System
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Brake Oil Cooler(#10271-)
| 01***65 | Capscrew - M16 X 2.00 X 90 | 4 |
| 01***90 | Bolt | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Brake Oil Cooler(#8001-10270)
| 01***65 | Capscrew - M16 X 2.00 X 90 | 4 |
| 01***90 | Bolt | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Coolant Level Sensor
| 07***34 | O-Ring,(For Wt800e-1) (See Fig.A2110) | 1 |
| 78***20 | Sensor,Coolant Level | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Coolant Line (1/2)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Coolant Line (1/3)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Coolant Line (2/2)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Coolant Line (2/3)(#8001-10270)
| 01***40 | Bolt (Op) | 4 |
| 01***55 | Bolt,(See Service News) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Coolant Line (3/3)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Air Conditioner Piping)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Screw | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Air Intake Related Parts)(#10271-)
| 56***80 | Clamp | 8 |
| 61***20 | Hose | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Buffer) (Battery Isolator)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 17 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 17 |
| 56***12 | Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Buffer) (Battery Isolator)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 20 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 17 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Buffer)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 17 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 17 |
| 56***12 | Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Buffer)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 20 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 17 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Coolant Line) (1/2)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 04***10 | Clip | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Coolant Line) (2/2)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***65 | Bolt,(Used With Pin Puller) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Electrical System)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 04***10 | Clip,(For Mono Lever Steering) | 1 |
| 07***34 | O-Ring,(For Wt800e-1) (See Fig.A2110) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Fan Net And Radiator Related Parts)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 36 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Inner Parts) (1/2)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 22 |
| 01***30 | Bolt,(With Body Positioner) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Inner Parts) (1/2)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 24 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 30 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Inner Parts) (2/2)(#10271-)
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***55 | Bolt,(See Service News) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Inner Parts) (2/2)(#8001-10270)
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***55 | Bolt,(See Service News) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Mounting Parts)(#10271-)
| 01***90 | Screw | 4 |
| 01***13 | Nut,(See Fig.337) | 12 |
| 01***13 | Nut | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Mounting Parts)(#8001-10270)
| 01***90 | Screw | 4 |
| 01***45 | Bolt,(For 60ton Dump Body) | 8 |
| 01***13 | Nut,(See Fig.337) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Net)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 36 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 38 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Cooling System : Radiator (Steering Oil Cooler Line)(#10271-)
Electrical System
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery And Cable) (Battery Isolator)
| 01***16 | Bolt - Starting Motor Ground Cable | 10 |
| 01***45 | Bolt, Bracket Mounting | 2 |
| 04***10 | Clip,(With Accumulator) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery And Cable) (Large Capacity) (Bttery Isolator)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***45 | Bolt, Bracket Mounting | 1 |
| 01***50 | Bolt,(See Fig.A4010-C3w6) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery And Cable) (Large Capacity)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 11 |
| 04***10 | Clip | 12 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery And Cable)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 10 |
| 04***10 | Clip,(With Accumulator) | 3 |
| 04***10 | Clamp | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery And Cable)(#8001-10271)
| 01***16 | Bolt - Starting Motor Ground Cable | 10 |
| 04***10 | Clip,(With Accumulator) | 3 |
| 04***10 | Clamp | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery Box) (Battery Isolator)(#8001-10271)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery Box) (Large Capacity) (Battery Isolator)
| 01***20 | Bolt,(For Mono Lever Steering) | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery Box) (Large Capacity)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery Box)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery Box)(#8001-10271)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery Switch)(#10271-)
| 01***25 | Bolt - Relay Mounting | 4 |
| 08***11 | Wire? 110mm,(For Ec Regulation) | 2 |
| 08***35 | Cap, Terminal | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Battery Switch)(#8001-10270)
| 01***25 | Bolt - Relay Mounting | 4 |
| 08***11 | Wire? 110mm,(For Ec Regulation) | 2 |
| 08***35 | Cap, Terminal | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Circuit Breaker)(#10271-)
| 01***16 | Screw,(With Payload Meter) | 2 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 8 |
| 01***12 | Bolt,(With Speedometer) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Circuit Breaker)(#8001-10270)
| 01***16 | Screw,(With Payload Meter) | 2 |
| 01***16 | Bolt, Mounting Transmission Control Switch | 8 |
| 01***12 | Bolt,(With Speedometer) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Emergency Steering Relay)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***08 | Screw, Terminal | 4 |
| 01***25 | Bolt - Relay Mounting | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Emergency Steering Relay)(#10271-)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***08 | Screw, Terminal | 4 |
| 01***25 | Bolt - Relay Mounting | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Hood) (For Abs)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Hood)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Line)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
| 04***10 | Clip | 4 |
| 08***25 | Cable | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Mounting Parts)
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 28***61 | Rod | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Mounting Parts) (Large Capacity)
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 28***61 | Rod | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Mounting Parts)(#10271-)
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 28***61 | Rod | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Rear Hood) (Battery Isolator)
| 04***10 | Pin,Cotter (Without Towing Winch), Cotter Pin; Was 04050-11610 | 2 |
| 09***12 | Cap,(With Auto Emergency Steering) | 2 |
| 09***00 | Catcher | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Rear Hood) (With A.B.S.)(#10271-)
| 04***10 | Pin,Cotter (Without Towing Winch), Cotter Pin; Was 04050-11610 | 2 |
| 08***12 | Grommet,(Not Used For Cab Spec.) | 2 |
| 09***00 | Catcher | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Rear Hood) (With A.B.S.)(#8001-10270)
| 04***10 | Pin,Cotter (Without Towing Winch), Cotter Pin; Was 04050-11610 | 2 |
| 08***12 | Grommet,(Not Used For Cab Spec.) | 2 |
| 09***00 | Catcher | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Rear Hood)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 04***10 | Pin,Cotter (Without Towing Winch), Cotter Pin; Was 04050-11610 | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Battery (Rear Hood)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 04***10 | Pin,Cotter (Without Towing Winch), Cotter Pin; Was 04050-11610 | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Beacon Lamp
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Clectrical System (Sensor And Harness Mounting Parts) (With Sand Protection)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 18 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 3 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Clectrical System (Sensor And Harness Mounting Parts)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 18 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 3 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Auto Priming Pump Piping)(#10271-)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Auto Priming Pump)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 56***60 | Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Auto Priming Pump)(#8001-10270)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Cab Harness)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 8 |
| 04***12 | Clip | 2 |
| 04***10 | Clip,(Without Cab) | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Cab Harness)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Harness And Mounting Parts? R.H.)(#10001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 24 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***45 | Bolt, Bracket Mounting | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Harness And Mounting Parts? R.H.)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 6 |
| 01***16 | Bolt - Starting Motor Ground Cable | 17 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Harness Mounting Parts? L.H.)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Harness Mounting Parts? L.H.)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Main Harness)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Main Harness)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***85 | Bolt, Divider Valve Mounting | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Mud Cover)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 56***80 | Cover | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Mud Cover)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 56***80 | Cover | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Sensor And Harness Mounting Parts) (For Sand Protection)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 18 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 3 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Sensor And Harness Mounting Parts)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 18 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 3 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Starter Cable)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***45 | Bolt, Bracket Mounting | 5 |
| 01***80 | Bolt (M10-1.50x80) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Electrical System (Starter Cable)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***45 | Bolt, Bracket Mounting | 5 |
| 01***80 | Bolt (M10-1.50x80) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Engine Room Lamp
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Fog Lamp
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Payload Meter (Harness And Lamp) (With Side Lamp)(#8001-10270)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Payload Meter Lamp (Cab) (With Side Lamp)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Payload Meter Lamp (Cab) (With Side Lamp)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Rear Lamp And Back-Up Buzzer
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Rear Lamp And Back-Up Buzzer (With Additional Lamp)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Side Lamp
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***16 | Bolt - Starting Motor Ground Cable | 7 |
| 01***11 | Nut - Mounting | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Electrical System : Side Lamp (With Payload Meter)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 09***12 | Cap,(With Auto Emergency Steering) | 2 |
Engine Related Parts
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Engine Related Parts : Damper
| 01***35 | Bolt, Mount Carrier | 24 |
| 01***40 | Capscrew - M12 X 1.75 X 40lg | 26 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 14 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Engine Related Parts : Engine Mounting
| 01***65 | Bolt,(For Shipping) | 2 |
| 01***15 | Bolt | 8 |
| 01***45 | Washer,(Without R.O.P.S.) | 10 |
Fuel Tank And Related Parts
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Line (1/2)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Line (1/2)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Line (2/2)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Line (2/2)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Drain Cover) (Muffler)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***75 | Bolt (M10-1.50x75) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Drain Cover) (With Vandalism Protection) (Muffler)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***75 | Bolt (M10-1.50x75) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Drain Cover) (With Vandalism Protection)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Drain Cover)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Drain Valve And Cover) (For Fuel Quick Coupler)(#10271-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Drain Valve And Cover) (For Vandalism Protection)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Drain Valve And Cover)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Drain Valve And Mounting Parts)(#8001-10270)
| 01***50 | Bolt,(For Large Size Tire) | 6 |
| 01***16 | Nut - M20 | 2 |
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Fuel Line Ralated Parts)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 02***25 | Elbow | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Fuel Quick Coupler Parts)(#8001-10270)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
| 07***12 | T/Plug, Plug,(For Power Tilt Mech Angle) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Mounting Parts) (For Muffler)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***75 | Bolt (M10-1.50x75) | 2 |
| 01***50 | Bolt,(For Large Size Tire) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Mounting Parts)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***50 | Bolt,(For Large Size Tire) | 6 |
| 01***16 | Nut - M20 | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Strainer) (With Fuel Quick Coupler)(#8001-10270)
| 17***90 | Strainer, Fuel Tank Filler | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Tank Related Parts)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***31 | Tube | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Tank) (With Fuel Quick Coupler)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 18 |
| 01***20 | Screw | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Tank) (With Fuel Quick Coupler)(#8001-10270)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 18 |
| 01***20 | Screw | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Tank)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***20 | Screw | 4 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 13 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Fuel Tank And Related Parts : Fuel Tank (Tank)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***20 | Screw | 4 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 13 |
Guard
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Engine Side Cover(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 26 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Engine Side Cover(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 26 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Engine Under Guard
| 01***40 | Capscrew | 2 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
| 01***80 | Capscrew | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender (Mud Guard)(#10271-)
| 01***30 | Bolt,(With Body Positioner) | 5 |
| 01***32 | Washer,(With Auto Emergency Steering) | 5 |
| 28***70 | Plate | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender (With Muffler And Side Lamp)(#10271-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***16 | Bolt - Starting Motor Ground Cable | 3 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender (With Muffler And Side Lamp)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 7 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender (With Muffler)(#10271-)
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 10 |
| 56***51 | Plate | 2 |
| 56***10 | Fender | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender (With Muffler)(#8001-10270)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender (With Side Lamp)(#10271-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***16 | Bolt - Starting Motor Ground Cable | 10 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender (With Side Lamp)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender Related Parts (With Muffler And Side Lamp)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender Related Parts (With Muffler)(#10271-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
| 56***41 | Guard | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender Related Parts (With Side Lamp)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender Related Parts(#10271-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
| 56***41 | Guard | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender(#10271-)
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 10 |
| 56***51 | Plate | 2 |
| 56***10 | Fender | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fender(#8001-10270)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 4 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fire Protection (With Exhaust Box)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 14 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fire Protection (With Exhaust Box)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 14 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fire Protection (With Muffler)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 14 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fire Protection (With Muffler)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 14 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fire Protection(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Fire Protection(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood (1/2) (For Ec Regulation)(#8001-10270)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 14 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 9 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood (1/2)(#8001-10270)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 14 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 9 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood (2/2) (For Antilock Brake System)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***75 | Bolt - Tube Mounting | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood (2/2) (For Sand Protection)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***75 | Bolt - Tube Mounting | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood (2/2)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***75 | Bolt - Tube Mounting | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood (Anti Slip Rubber)(#10271-)
| 56***21 | Rubber,(For Ec Regulation) | 3 |
| 56***60 | Rubber,Rubber | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood (For Ec Regulation)(#10271-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 14 |
| 01***12 | Screw (Without Radio Or Stereo) (2) | 4 |
| 01***03 | Nut,(With Joy Stick Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood (Front Support Stay)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***75 | Bolt - Tube Mounting | 4 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood (Line)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 9 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Hood(#10271-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 14 |
| 01***16 | Washer,(For 35a Alternator) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 14 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator (Anti Slip Rubber)(#10271-)
| 56***70 | Rubber,Rubber | 1 |
| 56***20 | Rubber,Rubber | 1 |
| 56***30 | Rubber,Rubber | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator (Cover)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 09***12 | Cap,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator (Curtain)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 09***12 | Cap,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator Guard (Battery Isolator)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 11 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator Guard (With Curtain And Sand Protection)(#10271-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 12 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator Guard (With Curtain And Sand Protection)(#8001-10270)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 12 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator Guard (With Curtain)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator Guard (With Curtain)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator Guard (With Sand Protection)(#10271-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 12 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator Guard (With Sand Protection)(#8001-10270)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 12 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator Guard(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 11 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Radiator Guard(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 11 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Transmission Under Guard(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 14 |
| 01***50 | Bolt,(For D60pl) | 2 |
| 01***80 | Capscrew | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Guard : Transmission Under Guard(#8001-10270)
| 01***30 | Bolt,(Not Used When Towing Winch) | 14 |
| 01***50 | Bolt,(For D60pl) | 2 |
| 01***80 | Capscrew | 2 |
Hydraulic System
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumlator Cover(#10271-)
| 01***14 | Bolt - Fuel Sensor Mounting | 4 |
| 56***71 | Cover | 1 |
| 56***20 | Cover | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumlator Mounting Parts (1/2)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***15 | Bolt | 3 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 7 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumlator Mounting Parts (1/2)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***15 | Bolt | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumlator Mounting Parts (2/2)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***75 | Bolt - Tube Mounting | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumlator Mounting Parts (2/2)(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Ass'Y (Parking Brake Line)(#10271-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***09 | Nut,(For Japan) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Ass'Y (Parking Brake Line)(#8001-10270)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***09 | Nut,(For Japan) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Piping (Accumulator)(#10271-)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Piping (Charge Valve And Related Parts)(#10271-)
| 01***40 | Bolt,(Shim 3-Piece) | 4 |
| 01***90 | Bolt,(For Large Fan) | 2 |
| 17***70 | Washer (Isolator Mounting) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Piping (Charge Valve And Related Parts)(#8001-10270)
| 01***40 | Bolt,(Shim 3-Piece) | 4 |
| 01***90 | Bolt,(For Large Fan) | 2 |
| 17***70 | Washer (Isolator Mounting) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Piping (Charge Valve To Accumulator) (1/2)(#10271-)
| 02***A6 | Hose | 1 |
| 02***15 | Elbow | 1 |
| 02***09 | O-Ring | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Piping (Charge Valve To Accumulator) (1/2)(#8001-10270)
| 02***A6 | Hose | 1 |
| 02***15 | Elbow | 1 |
| 02***09 | O-Ring | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Piping (Charge Valve To Accumulator) (2/2)(#10271-)
| 02***11 | Elbow | 1 |
| 02***13 | Elbow | 1 |
| 02***15 | Elbow | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Piping (Charge Valve To Accumulator) (2/2)(#8001-10270)
| 02***11 | Elbow | 1 |
| 02***13 | Elbow | 1 |
| 02***15 | Elbow | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Accumulator Piping (Filter And Related Parts)(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Auto Suspension Less Plug(#10271-)
| 07***23 | O-Ring,Plug | 1 |
| 07***09 | Plug,(For 2-Actuater Attachment) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Auto Suspension Piping(#10271-)
| 02***10 | Union | 1 |
| 02***08 | O-Ring | 1 |
| 07***23 | O-Ring,Plug | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Oil Line (Brake Cooling Oil Control Valve Line) (1/3)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***15 | Bolt | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Oil Line (Brake Cooling Oil Control Valve Line) (2/3) (Valve Inner Parts)(#10271-)
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***45 | Bolt, Mount Body To Block | 4 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Oil Line (Brake Cooling Oil Control Valve Line) (2/3) (Valve Inner Parts)(#8001-10270)
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***45 | Bolt, Mount Body To Block | 4 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Oil Line (Brake Cooling Oil Control Valve Line) (3/3)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***45 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Oil Line (Brake Cooling Oil Control Valve Line) (Clip) (1/2)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***09 | Nut,(For Japan) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Oil Line (Brake Cooling Oil Control Valve Line) (Clip) (2/2)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Oil Line (Brake Cooling Oil Control Valve Line)(#10271-)
| 01***15 | Bolt | 4 |
| 01***45 | Screw | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Piping (Brake Cooler To Transmission Oil Pan)(#10271-)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Piping (Brake Cooler To Transmission Oil Pan)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***09 | Nut,(For Japan) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Piping (Hydarulic Tank To Pump) (Clip)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Piping (Hydarulic Tank To Pump)(#8001-10270)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Piping (Pump To Rear Brake)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***25 | Bolt | 4 |
| 01***09 | Nut,(For Japan) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Piping (Pump To Rear Brake)(#8001-10270)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***25 | Bolt | 4 |
| 01***09 | Nut,(For Japan) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Piping (Rear Brake To Brake Cooler) (-40?C Spec.)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
| 01***35 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Piping (Rear Brake To Brake Cooler)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
| 01***35 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Cooling Piping (Rear Brake To Brake Cooler)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
| 01***35 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Accumulator Cut And Parking Brake Line) (With Abs)(#10271-)
| 01***60 | Bolt,(With Body Positioner) | 2 |
| 01***90 | Bolt,With Cover | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Accumulator Cut And Parking Brake Line)(#10271-)
| 02***04 | Hose | 1 |
| 02***10 | Hose | 1 |
| 02***09 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Accumulator Cut Emergency Brake Valve And Brake Valve Drain Line)(#10271-)
| 02***10 | Hose,(For 3-Spool Valve) | 1 |
| 20***10 | Hose? 950mm,950mm | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Accumulator To Block) (1/2) (With Ars)(#8001-10270)
| 02***10 | Hose,(For 3-Spool Valve) | 1 |
| 02***04 | Hose | 1 |
| 02***10 | Hose | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Accumulator To Block) (1/2)(#8001-10270)
| 02***10 | Hose,(For 3-Spool Valve) | 1 |
| 02***04 | Hose | 1 |
| 02***10 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Accumulator To Block) (2/2)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Abs Control Valve)(#8001-10270)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***90 | Capscrew | 1 |
| 01***09 | Nut,(For Japan) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (1/2) (With Abs)(#10271-)
| 02***16 | Elbow | 2 |
| 02***08 | O-Ring | 2 |
| 02***12 | O-Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (1/2) (With Abs)(#8001-10270)
| 02***16 | Elbow | 2 |
| 02***08 | O-Ring | 2 |
| 02***12 | O-Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (1/2) (Without Front Brake Cut)(#10271-)
| 02***16 | Elbow | 1 |
| 02***22 | Nut,Cap | 1 |
| 02***08 | O-Ring | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (1/2) (Without Front Brake Cut)(#8001-10270)
| 02***16 | Elbow | 1 |
| 02***22 | Nut,Cap | 1 |
| 02***08 | O-Ring | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (1/2)(#10271-)
| 02***16 | Elbow | 2 |
| 02***08 | O-Ring | 2 |
| 02***12 | O-Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (1/2)(#8001-10270)
| 02***16 | Elbow | 2 |
| 02***08 | O-Ring | 2 |
| 02***12 | O-Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (2/2) (With Abs)(#10271-)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (2/2) (With Abs)(#8001-10270)
| 01***70 | Screw | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***50 | Bolt | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (2/2) (Without Front Brake Cut)(#10271-)
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***70 | Screw | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (2/2) (Without Front Brake Cut)(#8001-10270)
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***70 | Screw | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (2/2)(#10271-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***70 | Screw | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Block To Front Brake Shuttle Valve) (2/2)(#8001-10270)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***70 | Screw | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Brake Valve? Emergency Brake Valve To Block) (With Abs)(#10271-)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Brake Valve? Emergency Brake Valve To Block) (With Abs)(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Brake Valve? Emergency Brake Valve To Block) (Without Front Brake Cut)(#10271-)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Brake Valve? Emergency Brake Valve To Block) (Without Front Brake Cut)(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Brake Valve? Emergency Brake Valve To Block)(#10271-)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Brake Valve? Emergency Brake Valve To Block)(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Clamp) (1/2)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Clamp) (2/2)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 1 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Clamp)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 1 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Front Line)(#10271-)
| 01***65 | Bolt, Mount Tube To Divider Valve | 1 |
| 02***18 | Hose | 1 |
| 02***12 | O-Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Main Harness)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 04***10 | Clip,(With Accumulator) | 4 |
| 04***10 | Clip | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Parking Brake Pump Line)(#10271-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***09 | Nut,(For Japan) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Parking Brake Tube)(#10271-)
| 01***09 | Nut,(For Japan) | 24 |
| 01***32 | Washer,(With Auto Emergency Steering) | 24 |
| 02***15 | O-Ring | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Parking Brake Tube)(#8001-10270)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***09 | Nut,(For Japan) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Brake Shuttle Line) (With Abs) (1/2)(#8001-10270)
| 01***65 | Capscrew | 4 |
| 01***70 | Screw | 2 |
| 01***75 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Brake Shuttle Line) (With Abs) (2/2)(#8001-10270)
| 01***60 | Bolt,(With Body Positioner) | 2 |
| 01***90 | Bolt,With Cover | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Brake Shuttle Valve Line)(#8001-10270)
| 01***70 | Screw | 2 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Cross Piping) (Bracket) (With Abs)(#10271-)
| 01***65 | Capscrew | 4 |
| 01***75 | Capscrew | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Cross Piping) (Bracket)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Shuttle Valve) (With Abs)(#10271-)
| 01***70 | Screw | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
| 02***A8 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Shuttle Valve)(#10271-)
| 01***70 | Screw | 2 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Support Piping 1/2) (With Abs)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 02***04 | Hose | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Support Piping 2/2) (With Abs)(#10271-)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***90 | Capscrew | 1 |
| 01***09 | Nut,(For Japan) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Support Piping) (Without Front Brake Cut)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 02***04 | Hose | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Brake Piping (Rear Support Piping)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 02***04 | Hose | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Cross Over Relief Valve (For Asr)(#10271-)
| 01***30 | Bolt - M8 X 30lg | 16 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***30 | Bolt, Mounting - Front Hand Rails | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Cross Over Relief Valve(#10271-)
| 01***30 | Bolt - M8 X 30lg | 16 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 16 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Cydraulic Tank (Steering And Hoist Line) (4/5)(#8001-10270)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Demand Valve And Hoist Valve(#8001-10270)
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***20 | Bolt,For Weight Adjusting Bolt | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Dump Control Line(#10271-)
| 02***20 | Hose | 1 |
| 02***12 | O-Ring | 1 |
| 04***11 | Clamp, Vinyl | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Dump Control Line(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
| 01***08 | Nut, Regular Hexagon (M10-1.50) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Emergency Steering Flow Switch (Auto Type)(#8001-10270)
| 08***34 | Tie, Cable | 1 |
| 20***50 | O-Ring,(With Auto Emergency Steering) | 1 |
| 42***11 | Switch, Pressure | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Emergency Steering Flow Switch (Band)(#10271-)
| 08***34 | Tie, Cable | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Emergency Steering Flow Switch (Bolt)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Emergency Steering Flow Switch (Manual Type)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 02***25 | Plug | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hoist Control Piping (Epc Valve To Hoist Valve)(#8001-10270)
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 02***A3 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Demand Valve To Steering Valve) (1/2)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Demand Valve To Steering Valve) (1/2)(#8001-10270)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Demand Valve To Steering Valve) (2/2) (With Engine Side Cover)(#10271-)
| 01***09 | Nut,(For Japan) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Demand Valve To Steering Valve) (2/2)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***09 | Nut,(For Japan) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Demand Valve To Steering Valve) (2/2)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***09 | Nut,(For Japan) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Emergency Steering Line)(#8001-10270)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***50 | Capscrew | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Hoist And Brake Cooling)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***09 | Nut,(For Japan) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Hoist Control Valve Line)(#10271-)
| 07***38 | O-Ring,(For Shipping) | 2 |
| 07***06 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Hoist Cylinder Line) (1/2)(#10271-)
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Hoist Cylinder Line) (1/2)(#8001-10270)
| 01***30 | Bolt - M8 X 30lg | 16 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Hoist Cylinder Line) (2/2)(#10271-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***09 | Nut,(For Japan) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Hoist Cylinder Line) (2/2)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Hoist Cylinder Line)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Pump To Demand Valve)(#8001-10270)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***32 | O-Ring (K31) | 4 |
| 07***05 | Hose | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Steering Cylinder Line)(#10155-10270)
| 01***30 | Bolt - M8 X 30lg | 32 |
| 01***40 | Screw, Hex Socket | 4 |
| 01***45 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Steering Cylinder Line)(#10271-)
| 01***40 | Screw, Hex Socket | 4 |
| 01***45 | Screw | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Steering Cylinder Line)(#8001-10154)
| 01***30 | Bolt - M8 X 30lg | 32 |
| 01***40 | Screw, Hex Socket | 4 |
| 01***45 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Steering Oil Cooler Line) (With Engine Side Cover)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Steering Oil Cooler Line)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Steering Oil Cooler Line)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Transmission Filter Line)(#8001-10270)
| 01***40 | Bolt (Op) | 1 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 3 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Piping (Transmission Oil Filler)(#8001-10270)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Breather Line)(#10271-)
| 01***50 | Bolt,(See Fig.A4010-C3w6) | 1 |
| 04***10 | Clip | 1 |
| 07***14 | Tube | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Hydraulic Tank To Epc Valve)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 02***04 | Hose | 1 |
| 02***07 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Check Valve)(#10271-)
| 01***12 | Capscrew | 2 |
| 07***45 | O-Ring | 1 |
| 07***95 | Spring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Demand Valve And Hoist Valve)(#10271-)
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***20 | Bolt,For Weight Adjusting Bolt | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Dumo Control)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 02***04 | Hose | 1 |
| 02***07 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Emergency Steering Flow Swicth) (Auto Type)(#10271-)
| 20***50 | O-Ring,(With Auto Emergency Steering) | 1 |
| 42***11 | Switch, Pressure | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Emergency Steering Flow Swicth) (Manual Type)(#10271-)
| 02***25 | Plug | 1 |
| 07***34 | Gasket | 1 |
| 08***12 | Clip,(Without Accumulator) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Emergency Steering Line)(#10271-)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***50 | Capscrew | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Epc Valve To Hoist Valve)(#10271-)
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 02***A3 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Harness) (For Fillter Caution)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 16 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Harness)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 15 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Hoist And Brake Cooling Line) (For Fillter Caution)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***09 | Nut,(For Japan) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Hoist And Brake Cooling Line)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***09 | Nut,(For Japan) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Hoist Cylinder Related Parts)(#10271-)
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 07***55 | Flange, (Without Emergency Steering) | 2 |
| 07***35 | Bolt, Split Flange - Torque Converter End | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Parking Brake Line)(#10271-)
| 01***45 | Bolt | 4 |
| 01***60 | Bolt | 3 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Parking Brake Line)(#8001-10270)
| 01***45 | Bolt | 4 |
| 01***60 | Bolt | 3 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Pump To Demand Valve)(#10271-)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***32 | O-Ring (K31) | 2 |
| 07***49 | Flange, Split - Divider Valve End | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Return Filter) (With Oil Filter Sensor)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***95 | Capscrew - M12 | 4 |
| 01***40 | Capscrew | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Return Filter)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***95 | Capscrew - M12 | 4 |
| 01***40 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Return Filter)(#8001-10270)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***95 | Capscrew - M12 | 4 |
| 01***40 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steering And Hoist Line) (1/5)(#10271-)
| 01***90 | Capscrew | 4 |
| 01***15 | Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steering And Hoist Line) (1/5)(#8001-10270)
| 01***90 | Capscrew | 4 |
| 01***15 | Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steering And Hoist Line) (2/5)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***50 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steering And Hoist Line) (2/5)(#8001-10270)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***50 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steering And Hoist Line) (3/5)(#10271-)
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steering And Hoist Line) (3/5)(#8001-10270)
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steering And Hoist Line) (4/5)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steering And Hoist Line) (5/5)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steering And Hoist Line) (5/5)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***09 | Nut,(For Japan) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Steerung Oil Cooler Related Parts)(#10271-)
| 02***28 | Elbow | 1 |
| 02***18 | O-Ring,(F2320-62a0 -2 ) | 2 |
| 07***34 | O-Ring (K32) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank Mounting Parts)(#10271-)
| 01***35 | Capscrew - M14 (1)/(2) | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 07***16 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank Mounting Parts)(#8001-10270)
| 01***35 | Capscrew - M14 (1)/(2) | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 07***16 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank) (1/2)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank) (1/2)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank) (2/2) (Abs)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***90 | Capscrew | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank) (2/2) (Abs)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***90 | Capscrew | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank) (2/2) (Asr)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***90 | Capscrew | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank) (2/2) (Asr)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***90 | Capscrew | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank) (2/2)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***90 | Capscrew | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Sub Tank) (2/2)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***90 | Capscrew | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Suction Line)(#10271-)
| 07***00 | Coupling Assembly | 1 |
| 07***00 | Gasket | 2 |
| 07***00 | Clamp | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Tank) (Asr/Abs) (Vandalism Protection)(#10271-)
| 01***16 | Bolt - Box Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Tank) (Asr/Abs) (Vandalism Protection)(#8001-10270)
| 01***16 | Bolt - Box Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Tank) (Asr/Abs)(#10271-)
| 01***16 | Bolt - Box Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Tank) (Asr/Abs)(#8001-10270)
| 01***16 | Bolt - Box Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Tank) (Vandalism Protection)(#10271-)
| 01***16 | Bolt - Box Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Tank) (Vandalism Protection)(#8001-10270)
| 01***16 | Bolt - Box Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Tank)(#10271-)
| 01***16 | Bolt - Box Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Tank)(#8001-10270)
| 01***16 | Bolt - Box Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Transmission Filter Line)(#10271-)
| 01***40 | Bolt (Op) | 1 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 3 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Transmission Filter Sensor)(#10271-)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Transmission Oil Filler) (Vandalism Protection)(#8001-10270)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Transmission Oil Filler)(#10271-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank (Transmission Oil Filter) (Inner Parts)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***40 | Bolt (Op) | 9 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Harness G.(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 15 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Line (Accumlator Mounting Parts) (1/2)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 12 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Line (Accumlator Mounting Parts) (2/2)(#10271-)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 1 |
| 01***09 | Nut,(For Japan) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Line (Dump Control)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
| 01***08 | Nut, Regular Hexagon (M10-1.50) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Line (Parking Brake Pump Line) (Clip)(#10271-)
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 04***11 | Clip,(Sand And Dusty Spec.) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Line (Pm2 Service Kit)(#10271-)
| 07***23 | O-Ring | 2 |
| 79***20 | Nipple,Fan Pump Pressure | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Line (Tank Mounting Parts)(#10271-)
| 01***45 | Bolt,L.H | 2 |
| 01***16 | Nut - M20 | 6 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Line (Transmission Piping Related Parts)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***09 | Nut,(For Japan) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Mounting Parts(#10271-)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Hydraulic Tank Mounting Parts(#8001-10270)
| 01***45 | Bolt,L.H | 2 |
| 01***16 | Nut - M20 | 6 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Parking Brake Line (Clip)(#8001-10270)
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 04***11 | Clip,(Sand And Dusty Spec.) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Steering Cylinder (L.H.)(#10271-)
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 8 |
| 07***22 | O-Ring | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Steering Cylinder (R.H.)(#10271-)
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 8 |
| 07***22 | O-Ring | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Steering Cylinder And Cross Over Relief Valve (With A.S.R.)(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Steering Cylinder And Cross Over Relief Valve(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Steering Piping Protection(#10271-)
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***36 | U-Bolt, Boom Tubes To Boom Arm | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Transmission Filter Sensor(#8001-10270)
| 01***55 | Bolt,(See Service News) | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Transmission Oil Filter (Inner Parts)(#8001-10270)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***40 | Bolt (Op) | 9 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Transmission Piping (Breather Line) (Clip)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***50 | Bolt,(See Fig.A4010-C3w6) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Transmission Piping (Breather Line)(#10271-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 07***52 | Breather, Radiator Sub Tank | 1 |
| 07***02 | Adapter,(Except Japan) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Transmission Piping (Breather Line)(#8001-10270)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
| 01***50 | Bolt,(See Fig.A4010-C3w6) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Transmission Piping (Connecting Hose)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Transmission Piping (Connecting Hose)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Transmission Piping(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***09 | Nut,(For Japan) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Hydraulic System : Vehicle Health Monitoring System (Electrical Wiring) (Outside Cab)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***08 | Screw | 1 |
Main Frame And Related Parts
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Additional Ladder
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 8 |
| 56***60 | Step | 1 |
| 56***71 | Step | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Air Intake
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Emergency Steering Control Cable
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 04***10 | Clip | 8 |
| 04***11 | Clip,(Sand And Dusty Spec.) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Engine Earth
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 08***45 | Cable | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Engine Oil Filter (Inner Parts)(#10271-)
| 01***45 | Bolt | 12 |
| 07***40 | O-Ring | 3 |
| 07***05 | O-Ring,(F4320-71a0 -8 ) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Engine Oil Filter (Inner Parts)(#8001-10270)
| 01***45 | Bolt | 12 |
| 07***40 | O-Ring | 3 |
| 07***05 | O-Ring,(F4320-71a0 -8 ) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Engine Oil Filter And Related Parts(#10271-)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***35 | Capscrew | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Engine Oil Filter And Related Parts(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***35 | Capscrew | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Exhaust Box(#10271-)
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Exhaust Box(#8001-10270)
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Exhaust Piping (With Exhaust Box)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***09 | Nut, Lock | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Exhaust Piping (With Exhaust Box)(#8001-10270)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Exhaust Piping (With Muffler)(#10271-)
| 01***09 | Nut, Lock | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 56***40 | V-Clamp (1) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Exhaust Piping (With Muffler)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
| 01***09 | Nut, Lock | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Exhaust Piping(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***09 | Nut, Lock | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Exhaust Piping(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 19 |
| 01***09 | Nut, Lock | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Cab Harness) (L.H.)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 7 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Cab Harness) (R.H.)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 04***10 | Clip,(With Accumulator) | 2 |
| 08***12 | Clip | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Cab Mounting Parts)(#10271-)
| 01***45 | Bolt,(For 60ton Dump Body) | 8 |
| 01***60 | Bolt,Rear | 8 |
| 01***24 | Nut | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Cab Mounting Parts)(#8001-10270)
| 01***45 | Bolt,(For 60ton Dump Body) | 8 |
| 01***55 | Bolt,(Without Rops) | 12 |
| 01***60 | Bolt,Rear | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Steering Piping)(#10271-)
| 01***90 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Steering Piping)(#8001-10270)
| 01***90 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Steering Valve Mounting Parts)(#10271-)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Steering Valve Mounting Parts)(#8001-10270)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Steering Valve) (Inner Parts)(#10271-)
| 56***00 | Seal Kit | 1 |
| 56***00 | Kit, Seal | 1 |
| 56***10 | Housing Ass'Y | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Steering Valve) (Inner Parts)(#8001-10270)
| 56***00 | Seal Kit | 1 |
| 56***00 | Kit, Seal | 1 |
| 56***10 | Housing Ass'Y | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Step? R.H.)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***55 | Capscrew - M24 (2) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Support? L.H.) (With Fog Lamp)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Support? L.H.)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Support? L.H.)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Support? R.H.) (Beacon Lamp)(#8001-10270)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Support? R.H.) (Fog Lamp And Beacon Lamp)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Support? R.H.) (With Fog Lamp)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Support? R.H.)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt, Mounting Cranking Motor | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support (Support? R.H.)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support Stay
| 01***55 | Bolt,(Without Rops) | 4 |
| 01***60 | Bolt,Rear | 4 |
| 01***95 | Screw | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Front Support Stay (With Engine Side Cover)
| 01***55 | Bolt,(Without Rops) | 4 |
| 01***60 | Bolt,Rear | 4 |
| 01***00 | Capscrew | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Main Frame (Auto Lubrication)(#8001-10270)
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***45 | Bolt,L.H | 28 |
| 01***60 | Flat Washer - M20 (Hardened) | 28 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Main Frame (Frame)(#10271-)
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***45 | Bolt,L.H | 28 |
| 01***60 | Flat Washer - M20 (Hardened) | 28 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Main Frame (Related Parts)(#10271-)
| 07***80 | Seal,Dust (Kit) | 4 |
| 56***30 | Bushing | 2 |
| 56***60 | Bushing | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Main Frame (With A.B.S.)(#8001-10270)
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***45 | Bolt,L.H | 28 |
| 01***60 | Flat Washer - M20 (Hardened) | 28 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Main Frame (With A.S.R.)(#8001-10270)
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***45 | Bolt,L.H | 28 |
| 01***60 | Flat Washer - M20 (Hardened) | 28 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Main Frame (With Engine Side Cover)(#8001-10270)
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***45 | Bolt,L.H | 28 |
| 01***60 | Flat Washer - M20 (Hardened) | 28 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Main Frame (With Tire Stopper)(#8001-10270)
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***45 | Bolt,L.H | 28 |
| 01***60 | Flat Washer - M20 (Hardened) | 28 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Main Frame(#8001-10270)
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***45 | Bolt,L.H | 28 |
| 01***60 | Flat Washer - M20 (Hardened) | 28 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Muffler Related Parts(#10271-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Muffler(#8001-10270)
| 01***50 | Bolt,(Spark Arrester Spec.) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Positioner(#10271-)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***30 | Bolt,(With Body Positioner) | 3 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Positioner(#8001-10270)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***30 | Bolt,(With Body Positioner) | 3 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Lubrication Piping(#10271-)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Lubrication Piping(#8001-10270)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Support (Auto Lubrication)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***60 | Bolt,Rear | 24 |
| 01***80 | Capscrew | 16 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Support (Cab Mounting Parts)(#10271-)
| 01***55 | Bolt,(Without Rops) | 12 |
| 01***60 | Bolt,Rear | 4 |
| 01***24 | Nut | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Support (Exhaust Piping)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Support (Platform Mounting Parts)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Support (Related Parts)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***60 | Bolt,Rear | 22 |
| 01***80 | Capscrew | 16 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Support (With Muffler)(#8001-10270)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***60 | Bolt,Rear | 24 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Support(#10271-)
| 01***60 | Bolt,Rear | 2 |
| 01***60 | Flat Washer - M20 (Hardened) | 2 |
| 56***70 | Support,Rear | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Rear Support(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***60 | Bolt,Rear | 24 |
| 01***80 | Capscrew | 16 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Steering Link (Front Lublication Piping) (1/2)(#10271-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Steering Link (Front Lublication Piping) (2/2)(#10271-)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Steering Link (Front Lublication Piping)(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Steering Link (Knuckle And Tie Rod)(#8001-10270)
| 01***25 | Capscrew | 11 |
| 01***95 | Bolt | 8 |
| 01***90 | Washer,(For Shipping) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Steering Link (Lever)(#10271-)
| 07***55 | Seal,(Y1620-11a0a-3) | 2 |
| 56***20 | Bushing | 2 |
| 56***30 | Bushing | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Steering Link (Tie Rod)(#10271-)
| 01***25 | Capscrew | 11 |
| 04***20 | Ring, Retaining | 1 |
| 04***30 | Seal, Dust | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Tire Stopper
| 01***25 | Bolt, Pinlock | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
| 56***20 | Stopper,Tire | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Transmission Control
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Transmission Control (For Vulcan) (1/3)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 5 |
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Transmission Control (For Vulcan) (2/3)
| 01***16 | Seat,(For Desiccant Type) (Welded) | 4 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 6 |
| 58***60 | Angle | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Main Frame And Related Parts : Transmission Control (For Vulcan) (3/3)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 3 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***16 | Screw | 2 |
Marks And Plates
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Anti Slip Rubber
| 56***10 | Rubber, Nonskid | 1 |
| 56***21 | Rubber,(For Ec Regulation) | 4 |
| 56***60 | Rubber,Rubber | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Anti Slip Rubber (For Large Battery)
| 56***10 | Rubber, Nonskid | 1 |
| 56***20 | Rubber | 1 |
| 56***21 | Rubber,(For Ec Regulation) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Battery Caution Plate (English) (For U.S.A.)
| 09***10 | Safety Plate Ass'Y,Battery | 2 |
| 09***11 | Plate,Battery | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Battery Caution Plates (For Eu)
| 09***00 | Plate? Safety,Battery Caution | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Battery Caution Plates (For Large Battery) (English) (For U.S.A.)
| 09***10 | Safety Plate Ass'Y,Battery | 4 |
| 09***11 | Plate,Battery | 4 |
| 09***00 | Plate? Safety,(For South And North America) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Battery Caution Plates (For Large Battery) (For Eu)
| 09***00 | Plate? Safety,Battery Caution | 4 |
| 09***81 | Plate? Safety,Battery Cable Caution | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Battery Caution Plates (For Large Battery) (Spanish)
| 09***10 | Safety Plate Ass'Y,Battery | 4 |
| 09***11 | Plate,Battery | 4 |
| 09***82 | Plate? Safety,(Engine Cover Japanese) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Battery Caution Plates (For Large Battery) (Standard)
| 09***81 | Plate? Safety,Battery Cable Caution | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Battery Caution Plates (Spanish)
| 09***10 | Safety Plate Ass'Y,Battery | 2 |
| 09***11 | Plate,Battery | 2 |
| 09***82 | Plate? Safety,(Engine Cover Japanese) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Battery Isolator Plate (English)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Battery Isolator Plate (German)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Marks And Plates (1/2)
| 09***01 | Mark,Handling | 2 |
| 09***02 | Mark,Handling | 2 |
| 09***01 | Mark,Handling | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Marks And Plates (2/2) (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
| 09***00 | Plate,(Rops And Fops) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Marks And Plates (2/2) (English) (Ec Regulation)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Marks And Plates (2/2) (English) (For U.S.A.)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 8 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
| 09***00 | Plate,(Rops And Fops) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Marks And Plates (2/2) (German) (Ec Regulation)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 10 |
| 09***01 | Plate? Name,(Limited Supply) | 1 |
| 09***00 | Plate,(Rops And Fops) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Marks And Plates (2/2) (Spanish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
| 09***00 | Plate,(Rops And Fops) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Marks And Plates (2/2) (Spanish) (Ec Reguration)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***01 | Plate? Name,(Limited Supply) | 1 |
| 09***00 | Plate,(Rops And Fops) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Marks And Plates (2/2) (Swedish) (Ec Reguration)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***01 | Plate? Name,(Limited Supply) | 1 |
| 09***00 | Plate,(Rops And Fops) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Marks And Plates : Plates (Engine Cover)
| 09***01 | Plate? Safety,(With Eng. Side Cover Spanish) | 2 |
| 09***01 | Plate? Safety,With E.S.Cover (For Australia) | 2 |
| 09***01 | Plate? Safety,Without E.S.Cover (Except Ec) | 2 |
Miscellaneous
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Abs Chassis (Rear Piping)(#10271-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***09 | Nut,(For Japan) | 20 |
| 01***32 | Washer,(With Auto Emergency Steering) | 20 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Abs Chassis (Rear Piping)(#8001-10270)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***09 | Nut,(For Japan) | 14 |
| 01***32 | Washer,(With Auto Emergency Steering) | 14 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Abs Chassis (Wiring Harness)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Abs Chassis (Wiring Harness)(#8001-10270)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***35 | Capscrew - M14 (1)/(2) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Air Conditioner Related Parts (1/2)(#10271-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Air Conditioner Related Parts (1/2)(#8001-10270)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Air Conditioner Related Parts (2/2)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Air Conditioner Related Parts (2/2)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 9 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Angle Sensor)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***35 | Capscrew - M14 (1)/(2) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Asr Rear Bracket) (Hydraulic Piping)(#8001-10270)
| 01***65 | Capscrew | 4 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 3 |
| 01***70 | Screw | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Asr Rear Bracket) (Valve And Switch)(#8001-10270)
| 01***60 | Bolt,(With Body Positioner) | 3 |
| 01***90 | Bolt,With Cover | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Asr Valve) (Electrical System)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***55 | Bolt, Mount Dryer To Bracket And Frame | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Asr Valve) (Hydraulic Piping)(#10271-)
| 01***65 | Capscrew | 4 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 3 |
| 01***70 | Screw | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Asr Valve) (Rear Piping)(#10271-)
| 02***06 | Hose | 1 |
| 02***05 | Hose | 2 |
| 02***A5 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Asr Valve)(#10271-)
| 01***60 | Bolt,(With Body Positioner) | 3 |
| 01***90 | Bolt,With Cover | 4 |
| 01***45 | Bolt | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Electrical System)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Rear Bracket)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 5 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
| 07***34 | O-Ring,(F5320-61a0 -11 ) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Asr Chassis (Rear Piping)(#8001-10270)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***09 | Nut,(For Japan) | 20 |
| 01***32 | Washer,(With Auto Emergency Steering) | 20 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Auto Lubrication (4 Point Lubrication) (Front)
| 01***75 | Bolt - Tube Mounting | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Auto Lubrication (4 Point Lubrication) (Rear)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 18 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Auto Lubrication (4 Point Lubrication) (Rear) (Mounting Parts)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 12 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Battery Isolator
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***85 | Bolt, Divider Valve Mounting | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Battery Isolator (For Vhms)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Cap Lock
| 09***00 | Lock,(With Vandalism Protection) | 1 |
| 09***03 | Lock | 1 |
| 60***40 | Cap,(Vandalism Protection Type) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Engine Oil Pan And Coolant Heater(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fire Extinguisher (Arabic)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 09***00 | Fire Extinguisher,(Arabic) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fire Extinguisher (Chinese)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 09***00 | Extinguisher | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fire Extinguisher (English)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 09***00 | Fire Extinguisher,(English) | 1 |
| 09***00 | Plate? Name,(Extinguisher) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fire Extinguisher (French)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 09***00 | Fire Extinguisher,(French) | 1 |
| 09***00 | Plate,Extingusher (French) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fire Extinguisher (German)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 09***00 | Extinguisher | 1 |
| 09***00 | Plate,(Extinguisher) (Ec Regulation) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fire Extinguisher (Indonesian)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 09***00 | Fire Extinguisher | 1 |
| 09***00 | Plate? Name,(Extinguisher) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fire Extinguisher (Italian)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 09***00 | Fire Extinguisher,(Italian) | 1 |
| 09***00 | Plate? Name,(Extinguisher) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fire Extinguisher (Russian)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 09***00 | Extinguisher,(Russian) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Fire Extinguisher (Spanish)
| 01***16 | Bolt, Mounting Transmission Control Switch | 4 |
| 09***00 | Extinguisher,(Spanish) | 1 |
| 09***00 | Plate,Extinguisher (Spanish) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Front Propeller Shaft Guard
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***50 | Bolt,(For D60pl) | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Pm2 Service Kit
| 07***23 | O-Ring | 1 |
| 07***23 | O-Ring,Plug | 1 |
| 42***71 | Adapter,(F4310-55a0 -7 ) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Rear Monitor (Related Parts)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 04***10 | Clip - Fuel Sensor Harness | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Rear Monitor(#8001-10270)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Rear Propeller Shaft Guard
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***70 | Bolt | 4 |
| 01***80 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Sand Protection (1/2) (Sandy And Dusty Spec.)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Sand Protection (2/2) (Sandy And Dusty Spec.)
| 01***20 | Bolt,(For Mono Lever Steering) | 14 |
| 01***08 | Nut, Regular Hexagon (M10-1.50) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 14 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Vehicle Health Monitoring System (Antenna And Related Parts) (With Orbcom)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Vehicle Health Monitoring System (Antenna And Related Parts) (With Orbcom)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 7 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Vehicle Health Monitoring System (Electrical Wiring? 1/2) (Outside Cab)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Vehicle Health Monitoring System (Electrical Wiring? 1/2)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Vehicle Health Monitoring System (Electrical Wiring? 2/2) (Outside Cab)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***08 | Screw | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Miscellaneous : Vehicle Health Monitoring System (Electrical Wiring? 2/2)(#10271-)
| 04***10 | Clip,See Fig. K4010-05a0 | 1 |
| 04***12 | Clip,See Fig. K4010-41a1 | 1 |
| 08***19 | Band - Tie Hose To Wire Harness | 1 |
Operator'S Compartment And Control System
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Step (Front)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***35 | Bolt,(With Rops) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Step Mounting Parts(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt,(With Rops) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Step Related Parts (Antenna)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 9 |
| 01***20 | Screw | 1 |
| 01***16 | Screw,(With Ashtray) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Step Related Parts (Antenna)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 9 |
| 01***20 | Screw | 1 |
| 01***16 | Screw,(With Ashtray) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Step Related Parts (Mud Guard)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Step Related Parts (Mud Guard)(#8001-10270)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 9 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Step Related Parts (Under Cover)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 38 |
| 01***32 | Washer,(With Auto Emergency Steering) | 38 |
| 42***90 | Finisher | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Step Related Parts (Under Cover)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 38 |
| 01***32 | Washer,(With Auto Emergency Steering) | 38 |
| 42***90 | Finisher | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Step Related Parts(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Cab Wiring
| 08***36 | Tie, Cable | 5 |
| 56***50 | Wiring Harness | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Accelerator Pedal)(#10119-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 42***11 | Plate | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Accelerator Pedal)(#8001-10118)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 42***11 | Pedal | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Air Conditioner Piping)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***12 | Bolt - M8 - 1.25 X 12 | 10 |
| 01***30 | Bolt - M8 X 30lg | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Air Conditioner Unit Inner Parts) (1/2)
| 56***00 | Air Conditioner Kit | 1 |
| AN***30 | Heater Core Ass'Y | 1 |
| AN***10 | Case,R.H | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Air Conditioner Unit Inner Parts) (2/2)
| 56***21 | Blower Ass'Y | 1 |
| 56***31 | Intake Ass'Y | 1 |
| 56***00 | Blower Ass'Y | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Air Duct)
| 01***16 | Bolt - Box Mounting | 14 |
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***16 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Angle Sensor Less)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Assistant Seat)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 10 |
| 01***14 | Screw (Joystick Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Brake And Transmission Controller)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***20 | Bolt,(Without Air Con. Or Heater) | 1 |
| 01***85 | Bolt - M8 X 85lg | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Brake Valve And Secondary Brake Valve) (1/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***32 | Washer,(With Auto Emergency Steering) | 7 |
| 02***22 | Union | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Brake Valve And Secondary Brake Valve) (2/3)
| 02***08 | Hose | 1 |
| 02***08 | Hose | 1 |
| 02***A8 | Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Brake Valve And Secondary Brake Valve) (3/3)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***75 | Bolt - Tube Mounting | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Cab Harness)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
| 01***12 | Screw | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Column Switch And Steering Wheel)
| 08***13 | Connector | 1 |
| 08***12 | Connector | 1 |
| 08***10 | Connector,Light & Dimmer | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Console Box)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 6 |
| 01***08 | Screw (1)/(2) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Console Box) (12v Dc Less)
| 09***12 | Cap,(With Auto Emergency Steering) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Dashboard) (1/2)
| 01***16 | Bolt - Box Mounting | 14 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 14 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Dashboard) (2/2) (Rear Monitor Less)
| 01***16 | Screw | 27 |
| 01***23 | Washer | 27 |
| 09***06 | Cap - Machines Without Rear Wiper | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Dashboard) (2/2) (With Rear Monitor)
| 01***16 | Screw | 27 |
| 01***23 | Washer | 27 |
| 09***06 | Cap - Machines Without Rear Wiper | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Dump Control Lever And Related Parts)
| 01***45 | Bolt | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Electrical System? For Instrument Panel)
| 01***16 | Screw (Without Radio) (1) | 2 |
| 01***12 | Screw | 6 |
| 01***16 | Screw,(With Payload Meter) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Electrical System? For Instrument Panel) (Without Side Lamp Switch)
| 01***16 | Screw (Without Radio) (1) | 2 |
| 01***12 | Screw | 6 |
| 01***16 | Screw,(With Payload Meter) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Floor Related Parts)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Floor Wiring)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 11 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Fuse Box And Relay)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***16 | Screw,(With Payload Meter) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Main Monitor) (Rear Monitor Less)
| 01***12 | Bolt - Front Cover Mounting | 8 |
| 01***23 | Washer,(With Auto Emergency Steering) | 8 |
| 78***00 | Monitor Ass'Y (Mph) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Main Monitor) (With Rear Monitor)
| 01***12 | Bolt - Front Cover Mounting | 8 |
| 01***14 | Screw | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Monitor Decal)
| 56***20 | Plate | 1 |
| 56***60 | Plate, Emergency Steering | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Operator'S Seat) (Air Suspension Seat) (Isring Hausen)
| 42***11 | Seat Assembly (Without Joystick Strg) | 1 |
| 42***10 | Cushion,(Tg17574-40) | 1 |
| 42***20 | Cushion,(Tg18739-22) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Operator'S Seat) (Fablic Seat)
| 56***12 | Seat Ass'Y | 1 |
| AS***85 | Head Rest Kit | 1 |
| AS***43 | Back Foam Kit | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Rear Cover)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***12 | Screw | 9 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Seat Mounting And Seat Belt) (Fablic Seat)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***20 | Bolt,See Fig. K4010-65a0 | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Seat Mounting And Seat Belt) (Isring Hausen)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***20 | Bolt,See Fig. K4010-65a0 | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Steering Column)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***35 | Bolt | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Stereo Cassette) (Auto Lubrication Less)
| 01***10 | Bolt - Relay And Flasher Mounting | 4 |
| 56***40 | Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Stereo Cassette)(With Auto Lubrication)
| 01***12 | Screw | 4 |
| 01***10 | Bolt - Relay And Flasher Mounting | 4 |
| 08***00 | Fuse, Radio 1a | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor (Wiring Harness)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 08***20 | Cable, Battery (Jumper + To -) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Floor Mat
| 56***71 | Mat | 1 |
| 56***80 | Mat | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Accessory)
| 01***12 | Bolt - M8 - 1.25 X 12 | 1 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 10 |
| 01***16 | Screw,(With Payload Meter) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Accessory) (Sun Visor Single Type)
| 01***12 | Bolt - M8 - 1.25 X 12 | 1 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 10 |
| 01***16 | Screw,(With Payload Meter) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Antenna Cable And Front Wiper)
| 56***50 | Glass | 1 |
| 56***60 | Glass | 1 |
| 56***70 | Glass | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Antenna Cable)
| 08***08 | Grommet,(Without Beacon Lamp) | 2 |
| 56***50 | Grommet | 1 |
| 56***50 | Cable, Antenna | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Cab)
| 56***11 | Cab Body Ass'Y | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Door Related Parts)
| 01***20 | Bolt,(For Mono Lever Steering) | 12 |
| 01***16 | Screw | 2 |
| 01***25 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Filter Box? For Air Conditioner)
| 42***41 | Filter | 1 |
| 56***12 | Cover | 1 |
| 56***90 | Screw | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (L.H. Door? Accessory Parts)
| 01***10 | Screw | 8 |
| 01***16 | Screw | 3 |
| 01***16 | Screw,(See Fig. K0210-16a0) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (L.H. Door? Door Lock)
| 01***12 | Screw | 2 |
| 01***16 | Screw | 8 |
| 01***16 | Screw | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (L.H. Door? Window Glass And Related Parts)
| 01***12 | Screw | 6 |
| 01***16 | Screw | 1 |
| 01***08 | Screw | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Marks And Plates)
| 09***30 | Plate? Mark,Mark? Galeo | 1 |
| 56***40 | Plate, Mark, Komatsu | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (R.H. Door? Accessory Parts)
| 01***10 | Screw | 4 |
| 01***16 | Screw | 3 |
| 01***16 | Screw,(See Fig. K0210-16a0) | 7 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (R.H. Door? Door Lock)
| 01***12 | Screw | 2 |
| 01***16 | Screw | 8 |
| 01***16 | Screw | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (R.H. Door? Window Glass And Related Parts)
| 01***08 | Screw | 2 |
| 09***08 | Cap,(For Ripper Or Rear Hydraulic. Take) | 1 |
| 21***70 | Stopper,Inner | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Roof Pad And Cover)
| 01***20 | Screw,(Australia Spec.) | 19 |
| 09***10 | Cap,(Without Air Conditioner) | 2 |
| 41***90 | Washer | 19 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Sheet? Cab Inside)
| 56***11 | Sheet | 1 |
| 56***21 | Sheet | 1 |
| 56***31 | Sheet | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Window Washer Tank)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Operator'S Compartment And Control System : Operator'S Cab (Wiper)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Platform And Related Parts
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Antenna Relaed Parts(#8001-10270)
| 01***09 | Nut,(For Japan) | 22 |
| 01***32 | Washer,(With Auto Emergency Steering) | 22 |
| 07***42 | U-Bolt, R.H. Tube Clamping | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Mounting Parts(#10271-)
| 01***45 | Bolt,L.H | 5 |
| 01***60 | Flat Washer - M20 (Hardened) | 5 |
| 09***16 | Cap,(For Rops Sweep) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Mounting Parts(#8001-10270)
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***45 | Bolt,L.H | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Antenna Relaed Parts)(#10271-)
| 01***09 | Nut,(For Japan) | 22 |
| 01***32 | Washer,(With Auto Emergency Steering) | 22 |
| 07***42 | U-Bolt, R.H. Tube Clamping | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Anti Slip Rubber)(#10271-)
| 56***21 | Rubber,(For Ec Regulation) | 1 |
| 56***60 | Rubber,Rubber | 1 |
| 56***70 | Rubber,Rubber | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Cab Step)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***35 | Bolt,(With Rops) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Cab Step)(#8001-10270)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***35 | Bolt,(With Rops) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Cab Step)(#8001-8001)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***35 | Bolt,(With Rops) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Handrail And Mud Guard)(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***35 | Bolt,(With Rops) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Handrail And Mud Guard)(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Heat Shield) (With Sand Protection)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Heat Shield) (With Sand Protection)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Heat Shield)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Heat Shield)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Mud Guard)(#10271-)
| 01***30 | Bolt,(With Body Positioner) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 28***70 | Plate | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Mud Guard)(#8001-10270)
| 01***30 | Bolt,(With Body Positioner) | 5 |
| 01***32 | Washer,(With Auto Emergency Steering) | 5 |
| 28***70 | Plate | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Payload Meter Lamp)(#10271-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Platform R.H.) (With Beacon Lamp)(#10271-)
| 56***32 | Platform | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Platform R.H.) (With Beacon Lamp)(#8001-10270)
| 56***30 | Platform | 1 |
| 56***31 | Platform | 1 |
| 56***32 | Platform | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Platform R.H.)(#10271-)
| 56***21 | Platform | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Platform R.H.)(#8001-10270)
| 56***20 | Platform | 1 |
| 56***21 | Platform | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Rear Suspension)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***05 | Capscrew | 32 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Rear Suspension)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***05 | Capscrew | 32 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Side Mirror) (L.H.)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 2 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Side Mirror) (L.H.)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***13 | Nut,(For Adjustable Rod) | 1 |
| 01***09 | Nut,(For Japan) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Side Mirror) (R.H.)(#10271-10426)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***13 | Nut,(For Adjustable Rod) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Side Mirror) (R.H.)(#10427-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***09 | Nut,(For Japan) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Side Mirror) (R.H.)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Toe Guard) (L.H.)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 56***21 | Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Toe Guard) (L.H.)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 56***21 | Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Toe Guard) (R.H.)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 9 |
| 01***32 | Washer,(With Auto Emergency Steering) | 9 |
| 56***30 | Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Toe Guard) (R.H.)(#8001-10270)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 9 |
| 01***32 | Washer,(With Auto Emergency Steering) | 9 |
| 56***30 | Bracket | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Under Mirror) (L.H.)(#10271-)
| 01***09 | Nut,(For Japan) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 04***45 | Pin,Cotter | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Under Mirror) (L.H.)(#8001-10270)
| 01***09 | Nut,(For Japan) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 04***45 | Pin,Cotter | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Under Mirror) (R.H.)(#10271-)
| 01***09 | Nut,(For Japan) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 04***45 | Pin,Cotter | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Related Parts (Under Mirror) (R.H.)(#8001-10270)
| 01***09 | Nut,(For Japan) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 04***45 | Pin,Cotter | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Air Cleaner) (Inner Parts)(#10271-)
| 60***50 | Valve, Vacuator | 1 |
| 60***11 | Cover Ass'Y | 1 |
| 60***71 | O-Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Air Cleaner) (Inner Parts)(#8001-10270)
| 60***50 | Valve, Vacuator | 1 |
| 60***11 | Cover Ass'Y | 1 |
| 60***71 | O-Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Air Cleaner)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Air Cleaner)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Anti Slip Rubber) (For Lage Battery)(#10271-)
| 56***20 | Rubber, Nonskid | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Anti Slip Rubber)(#10271-)
| 56***21 | Rubber,(For Ec Regulation) | 1 |
| 56***60 | Rubber,Rubber | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Battery Box)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Battery Mounting Parts)(#10271-)
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 28***61 | Rod | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Coolant Line)(#10271-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 04***10 | Clip | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Coolant Line)(#8001-10270)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 04***10 | Clip | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Coolant Reserve Tank) (With Vandalism Protection)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Cap,(For Vandalism Protection) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Coolant Reserve Tank) (With Vandalism Protection)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Cap,(For Vandalism Protection) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Coolant Reserve Tank)(#10271-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Cap,Radiator | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Coolant Reserve Tank)(#8001-10270)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***00 | Cap,Radiator | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Indicator)(#10271-)
| 60***60 | Indicator, Air Cleaner | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Indicator)(#8001-10270)
| 60***60 | Indicator, Air Cleaner | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Large Battery)(#10271-)
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 04***10 | Clip | 8 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Platform) (For Large Battery)(#10271-)
| 56***10 | Platform | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Platform) (For Large Battery)(#8001-10270)
| 56***10 | Platform | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Platform)(#10271-)
| 56***11 | Platform | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Platform And Related Parts : Platform Sub Ass'Y (Platform)(#8001-10270)
| 56***11 | Platform | 1 |
Rim And Tire
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rear Suspension Pressure Sensor
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 56***70 | Plate | 3 |
| 78***20 | Sensor,Pressure | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rim (Front Wheel) (For Large Tire)
| 09***41 | Core, Valve | 1 |
| 09***22 | Cap, Valve | 1 |
| 09***00 | Seat, Valve | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rim (Rear Wheel) (For Large Tire)
| 01***23 | Washer, Flat | 4 |
| 09***20 | Valve,Inside | 2 |
| 09***30 | Valve,Stem | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rim And Tire (24.0-R35?E3?Gp)
| 56***50 | O-Ring | 6 |
| 56***30 | Tire,Velsf | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rim And Tire (24.0-R35?E4?Gp)
| 56***50 | O-Ring | 6 |
| 56***10 | Tire,Vrls | 6 |
| 56***30 | Tire,Vmts | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rim And Tire (24.0-R35?E4?Vmto-Ce)
| 56***50 | O-Ring | 6 |
| 56***20 | Tire,(24.0-R35 E-4 Vmtp) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rim And Tire (24.0-R35?E4?Xdta4)
| 56***50 | O-Ring | 6 |
| 56***60 | Tire,(24.0-R35 Xdt A4 E4t) | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rim And Tire (Rim) (Front Wheel)
| 09***41 | Core, Valve | 1 |
| 09***22 | Cap, Valve | 1 |
| 09***00 | Seat, Valve | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rim And Tire (Rim) (Rear Wheel)
| 01***23 | Washer, Flat | 4 |
| 09***20 | Valve,Inside | 2 |
| 09***30 | Valve,Stem | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Rim And Tire : Rim And Tire (Tire)
| 56***50 | O-Ring | 6 |
| 56***20 | Tire,Bridgestone? E4-Cr Vrls | 6 |
| 56***40 | Tire,Bridgestone? E4-Cr Vmts | 6 |
Service Kit And Component Parts
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Accel Pedal(#10119-)
| 56***20 | Screw | 1 |
| 56***70 | Pin, Roller | 1 |
| 56***80 | Roller | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Accumulator
| 07***00 | O-Ring,(Y1620-11a0a-11) | 2 |
| 07***90 | O-Ring,Grease Pump Strap | 2 |
| 70***20 | Ring,Back-Up (Kit) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Check Valve
| 01***12 | Bolt | 2 |
| 07***55 | O-Ring | 1 |
| 70***10 | Body | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Cross Over Relief Valve
| 07***16 | O-Ring | 1 |
| 07***16 | Ring, Back-Up | 2 |
| 07***34 | O-Ring (K32) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Demand Valve (1/2)
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Demand Valve (2/2)
| 07***34 | O-Ring | 1 |
| 70***61 | O-Ring,(Pc100ss) | 1 |
| 70***90 | Ring,Back-Up (Itl) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Electric Lever
| 01***12 | Bolt | 5 |
| 08***10 | Connector | 1 |
| 70***31 | Lever Ass'Y,Dump Control | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Hoist Cylinder (Inner Parts)
| 01***50 | Capscrew | 6 |
| 01***45 | Washer | 6 |
| 04***04 | Ring, Snap | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Hoist Valve (1/2)
| 01***20 | Bolt | 4 |
| 07***14 | O-Ring | 2 |
| 07***34 | O-Ring,(F5320-61a0 -11 ) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Hoist Valve (2/2)
| 07***34 | O-Ring,(For Wt800e-1) (See Fig.A2110) | 1 |
| 70***30 | Ring, Back-Up | 1 |
| 70***90 | O-Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Hydraulic Pump (1/2)
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 04***20 | Pin,Dowel (Welded) | 4 |
| 04***20 | Ring,Snap | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Hydraulic Pump (1/3)
| 04***20 | Pin,Dowel (Welded) | 4 |
| 04***20 | Ring,Snap | 1 |
| 70***20 | Seal,Oil | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Hydraulic Pump (2/2)
| 01***30 | Bolt | 4 |
| 01***40 | Bolt,Sems | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Hydraulic Pump (2/3)
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
| 04***20 | Pin,Dowel (Welded) | 4 |
| 70***70 | Bolt | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Hydraulic Pump (3/3)
| 01***55 | Screw | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 70***90 | O-Ring | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Hydraulic Pump (Emergency Steering)
| 04***15 | Ring, Snap | 1 |
| 70***20 | Pump Ass'Y,(Sbl(1)14) | 1 |
| 70***20 | Seal, Oil | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Service Kit
| 02***15 | O-Ring,(F3320-63a2 -5 ) | 2 |
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 1 |
| 07***07 | O-Ring,(F5350-61a0 -8 ) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Service Kit And Component Parts : Steering Cylinder (Inner Parts)
| 01***11 | Nut,(With Under Mirror) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 02***15 | O-Ring,(F5350-63a0 -27 ) | 2 |
Tool
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Tool : General Tools
| 07***23 | Clamp,Hose | 1 |
| 07***80 | Hose | 1 |
| 07***50 | Pump, (Bellows Type) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Tool : Jack Unit (30ton)
| 56***11 | Jack,(30ton) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Tool : Jack Unit (50ton)
| 56***10 | Jack,(50ton) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Tool : Spare Parts
| 07***65 | O-Ring,(F5350-62a0 -14 ) | 1 |
| 07***65 | Ring,Back-Up (Kit) | 1 |
| 07***10 | Element,Oil Filter | 2 |
Torque Converter And Transmission
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Ecmv Ass'Y (1/3)
| 01***10 | Bolt | 4 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 1 |
| 08***10 | Band,Fuel Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Ecmv Ass'Y (2/3)
| 01***10 | Bolt | 4 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 1 |
| 42***00 | Ecmv Ass'Y | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Ecmv Ass'Y (3/3)
| 01***10 | Bolt | 4 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 1 |
| 08***10 | Band,Fuel Hose | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Brake Oil Piping)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Front Axle Ass'Y)
| 01***55 | Capscrew | 6 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Front Brake Ass'Y)
| 01***70 | Capscrew (4) (Qty.26 (5)) | 22 |
| 01***70 | Capscrew - M24 (1) | 20 |
| 01***60 | Flat Washer - M20 (Hardened) | 22 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Front Suspension Ass'Y) (1/3)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Front Suspension Ass'Y) (1/3) (Auto Suspension)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Front Suspension Ass'Y) (1/3) (Auto Suspension) (For Payload Meter)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Front Suspension Ass'Y) (2/3) (Auto Suspension)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
| 01***40 | Bolt (Op) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Front Suspension Ass'Y) (3/3)
| 01***85 | Screw | 15 |
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Knuckle And Arm Lever)
| 01***45 | Bolt,(For 60ton Dump Body) | 3 |
| 01***95 | Bolt | 4 |
| 01***90 | Washer,(For Shipping) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Mounting Pin)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (L.H.) (Suspension Pressure Sensor)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 04***10 | Clip,(For Mono Lever Steering) | 1 |
| 07***09 | O-Ring,(With Payload Meter) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Brake Oil Piping)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Front Axle Ass'Y)
| 01***55 | Capscrew | 6 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Front Brake Ass'Y)
| 01***70 | Capscrew (4) (Qty.26 (5)) | 22 |
| 01***70 | Capscrew - M24 (1) | 20 |
| 01***60 | Flat Washer - M20 (Hardened) | 22 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Front Suspension Ass'Y) (1/3)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Front Suspension Ass'Y) (1/3) (Auto Suspension)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Front Suspension Ass'Y) (1/3) (Auto Suspension) (For Payload Meter)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Front Suspension Ass'Y) (2/3) (Auto Suspension)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
| 01***40 | Bolt (Op) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Front Suspension Ass'Y) (3/3)
| 01***85 | Screw | 15 |
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Knuckle And Arm Lever)
| 01***45 | Bolt,(For 60ton Dump Body) | 3 |
| 01***95 | Bolt | 4 |
| 01***90 | Washer,(For Shipping) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Mounting Pin)
| 01***25 | Capscrew | 2 |
| 56***60 | Boot | 4 |
| 56***10 | Washer | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Axle (R.H.) (Suspension Pressure Sensor)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 04***10 | Clip,(For Mono Lever Steering) | 1 |
| 07***09 | O-Ring,(With Payload Meter) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Brake Piping
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Brake Piping (A.B.S.)
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Propeller Shaft
| 01***60 | Bolt, Upper Shaft Mounting | 8 |
| 42***90 | Screw | 8 |
| 42***21 | Spider Ass'Y | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Front Propeller Shaft Guard(#10271-)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***50 | Bolt,(For D60pl) | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Brake Cooling Piping)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Brake Pump Line)(#10271-)
| 01***09 | Nut,(For Japan) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 02***15 | O-Ring | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Brake Pump Line)(#8001-10270)
| 01***09 | Nut,(For Japan) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 02***15 | O-Ring | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Breath Line)(#10271-)
| 07***52 | Breather, Radiator Sub Tank | 1 |
| 07***00 | Nipple | 1 |
| 07***02 | Adapter,(Except Japan) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Nipple)(#10271-)
| 02***12 | O-Ring | 1 |
| 07***18 | O-Ring, Divider Valve Mounting | 1 |
| 41***20 | Nipple | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Pump To Demand Valve Line)(#10271-)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***32 | O-Ring (K31) | 2 |
| 07***05 | Hose | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Retarder Cooling Pump Line)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt - Pin Mounting | 2 |
| 01***20 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Retarder Cooling Pump Line)(#8001-10270)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***30 | Bolt - Pin Mounting | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Steering And Hoist Pump Line)(#10271-)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***60 | O-Ring | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Steering And Hoist Pump Line)(#8001-10270)
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***60 | O-Ring | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Torque Converter And Transmission Pump Line) (1/2)(#10271-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Torque Converter And Transmission Pump Line) (1/2)(#8001-10270)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 4 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Torque Converter And Transmission Pump Line) (2/2)(#10271-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Torque Converter And Transmission Pump Line) (2/2)(#8001-10270)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Piping (Transmission Piping)(#10271-)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***10 | Bolt,(With Joy Stick Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Pump(#10271-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 12 |
| 07***30 | O-Ring | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Hydraulic Pump(#8001-10270)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 12 |
| 07***30 | O-Ring | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Final Drive) (L.H.)
| 01***30 | Capscrew - M12 X 1.75 | 12 |
| 01***35 | Bolt | 12 |
| 01***60 | Capscrew | 7 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Final Drive) (R.H.)
| 01***30 | Capscrew - M12 X 1.75 | 12 |
| 01***35 | Bolt | 12 |
| 01***60 | Capscrew | 7 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Lubricating Tube)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Axle Housing)
| 01***50 | Bolt,(Not Used When With Cab) | 4 |
| 01***55 | Capscrew | 2 |
| 01***22 | Nut,(North America Spec.) | 58 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Axle Support)
| 01***25 | Capscrew | 6 |
| 07***70 | O-Ring (Kit) | 8 |
| 56***10 | Washer | 6 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Brake Piping)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 2 |
| 01***14 | Bolt - Fuel Sensor Mounting | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Brake Piping) (With A.B.S)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 2 |
| 01***14 | Bolt - Fuel Sensor Mounting | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Brake Piping) (With A.S.R)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 2 |
| 01***14 | Bolt - Fuel Sensor Mounting | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Differential) (1/4)
| 01***35 | Bolt, Mount Carrier | 4 |
| 01***75 | Bolt | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Differential) (2/4)
| 01***75 | Capscrew (4) (Qty.3 (5)) | 16 |
| 01***70 | Bolt | 1 |
| 01***70 | Bolt | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Differential) (3/4)
| 01***65 | Capscrew - M20 | 24 |
| 01***55 | Bolt,(With Cap) | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 24 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Differential) (4/4)
| 01***55 | Capscrew | 20 |
| 01***60 | Flat Washer - M20 (Hardened) | 20 |
| 04***42 | Pin,Dowel? Gear Case Cover | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Wheel Brake) (L.H.) (1/3)
| 01***00 | Capscrew | 17 |
| 01***55 | Stud | 30 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 25 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Wheel Brake) (L.H.) (2/3)
| 01***20 | Screw | 4 |
| 01***60 | Bolt,(Balancer) | 23 |
| 01***90 | Bolt | 36 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Wheel Brake) (L.H.) (2/3) (With Abs/Asr)
| 01***20 | Screw | 4 |
| 01***16 | Bolt | 2 |
| 01***20 | Capscrew - M10 | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Wheel Brake) (L.H.) (3/3)
| 01***35 | Bolt, M10x1.5x35 | 19 |
| 01***16 | Nut,(Balancer) | 30 |
| 01***14 | Nut (Itl) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Wheel Brake) (R.H.) (1/3)
| 01***00 | Capscrew | 17 |
| 01***55 | Stud | 30 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 25 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Wheel Brake) (R.H.) (2/3)
| 01***20 | Screw | 4 |
| 01***60 | Bolt,(Balancer) | 23 |
| 01***90 | Bolt | 36 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Wheel Brake) (R.H.) (2/3) (With Abs/Asr)
| 01***20 | Screw | 4 |
| 01***16 | Bolt | 2 |
| 01***20 | Capscrew - M10 | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Rear Wheel Brake) (R.H.) (3/3)
| 01***35 | Bolt, M10x1.5x35 | 19 |
| 01***16 | Nut,(Balancer) | 30 |
| 01***32 | Washer,(With Auto Emergency Steering) | 19 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle (Retarder Wear Monitor)
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 2 |
| 01***09 | Nut,(For Japan) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle Support(#10271-)
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Axle Support(#8001-10270)
| 01***25 | Capscrew | 6 |
| 07***70 | O-Ring (Kit) | 8 |
| 56***60 | Bushing | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Rear Propeller Shaft
| 01***70 | Bolt | 4 |
| 42***40 | Fitting, Grease | 2 |
| 42***90 | Capscrew - M16 X 2 X 75mm Lg | 8 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Torque Converter (1/3) (Bare Unit)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 18 |
| 01***30 | Bolt,(With Body Positioner) | 30 |
| 01***45 | Bolt,(With Water Separator Type) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Torque Converter (2/3) (Input Shaft And Drive Case)
| 01***45 | Capscrew - M16 | 14 |
| 01***75 | Capscrew | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 30 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Torque Converter (3/3) (Rear Hosing And P.T.O.)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 10 |
| 01***60 | Capscrew | 7 |
| 01***45 | Bolt,(With Water Separator Type) | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Torque Converter Valve
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***45 | Bolt,(With Water Separator Type) | 2 |
| 01***95 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Torque Converter Valve (Cover)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***90 | Capscrew | 9 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Torque Flow Ass'Y(#10271-)
| (5***0) | Transmission Ass'Y | 1 |
| (5***0) | Converter Ass'Y | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Torque Flow Ass'Y(#8001-10270)
| (5***0) | Transmission Ass'Y | 1 |
| (5***0) | Converter Ass'Y | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission (1/8) (1st? 2nd And Reverse Housing)
| 04***34 | Pin-Dowel, Pin,Dowel (For Shipping) | 2 |
| 04***38 | Pin, Dowel | 8 |
| 07***20 | O-Ring,(F4350-58a1a-6 ) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission (2/8) (3rd And High Housing)
| 01***40 | Capscrew | 17 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 16 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 48 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission (3/8) (4th And Low Housing)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission (4/8) (Carrier)
| 04***16 | Pin,(Dowel) | 1 |
| 04***35 | Bowl, Check Valve | 9 |
| 11***30 | Ring,Snap | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission (5/8) (Carrier)
| 01***40 | Capscrew | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission (6/8) (Carrier)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 04***10 | Ring, Retaining | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission (7/8) (Case)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 04***20 | Pin,Dowel (Welded) | 1 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission (8/8) (Input And Output)
| 01***80 | Bolt | 10 |
| 01***45 | Capscrew - M16 | 14 |
| 01***50 | Capscrew | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission (Docking Unit)
| 02***16 | Union | 1 |
| 02***16 | Elbow | 1 |
| 02***15 | O-Ring,(F3320-63a2 -5 ) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission Control Valve
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***80 | Bolt,(With Corrosion Resistor) | 1 |
| 01***50 | Screw | 32 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission Lubrication Valve
| 01***80 | Bolt,(With Corrosion Resistor) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***35 | O-Ring,Transmission Valve Mount | 3 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission Mounting Parts(#10271-)
| 01***30 | Bolt - Pin Mounting | 2 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 14 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 16 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission Mounting Parts(#8001-10270)
| 01***30 | Bolt - Pin Mounting | 2 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 14 |
| 01***75 | Capscrew | 4 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission Oil Tank
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(With Body Positioner) | 36 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission Piping(#10271-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***09 | Nut,(For Japan) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission Related Parts(#10271-)
| 01***75 | Capscrew | 4 |
| 01***85 | Bolt - Flange Mounting | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 12 |
Komatsu : Hd605-7e0(S/N 8001-Up (Ecot3; Overseas Version)) : Torque Converter And Transmission : Transmission Sensor
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 9 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) serial number reference
On the Komatsu HD605-7E0 rigid dump truck (ecot3, Overseas Version), the Product Identification Number (PIN)/Machine Serial Number plate is riveted to the left front end of the main frame, the standard plate location Komatsu uses across its dump truck lineup. The engine serial number appears on a separate plate on the engine block; record both the chassis PIN and the engine serial number together when ordering parts or requesting service. Komatsu identifies this family by a plain numeric serial sequence (e.g., 8001-UP) rather than a coded alphabetic prefix like Caterpillar's PIN system, so the serial number itself, not a letter code, is what ties the machine to its ecot3/Overseas Version parts and shop-manual coverage.
| Prefix | Identifies | Notes |
|---|---|---|
| 8001-8032 | HD605-7E0 (ecot3, Overseas Version) - initial production block | Per Komatsu factory shop manual (HD605-7E0 ecot3 parts book, S/N 8001-10731): Komatsu SAA6D170E-5 (water-cooled, turbocharged, air-to-air aftercooled, cooled EGR, common-rail fuel injection), Tier 3 EPA / EU Stage IIIA / Japan 2006 certified (net 533 kW / 715 HP, gross 551 kW / 739 HP); 7-speed fully automatic K-ATOMiCS transmission. Serial: numeric only, no alphabetic plant/region prefix. |
| 10101-UP | HD605-7E0 (ecot3, Overseas Version) - later production block | Listed as a continuation block in the same factory shop-manual family that also covers the sibling HD465-7E0; that manual does not split which serial ranges belong to which of the two models it bundles. However, at least two independent parts-catalog sources title their HD605-7E0 ecot3 parts book as covering the continuous span S/N 8001-10731, which supports 10101-and-up being a continuation of the HD605-7E0 line rather than exclusively the sibling HD465-7E0. Confirm with dealer: the exact upper boundary is not independently documented beyond the 8001-10731 span noted in parts catalogs. |
Frequently asked questions
What engine does the Komatsu HD605-7E0 (S/N 8001-up, ecot3, Overseas Version) use?
It uses the Komatsu SAA6D170E-5, a water-cooled, turbocharged, air-to-air aftercooled six-cylinder diesel with cooled EGR retained for ecot3/EPA Tier 3/EU Stage IIIA compliance, rated at approximately 551 kW (739 HP) gross and 533 kW (715 HP) net at 2,000 rpm.
What is the operating weight of the HD605-7E0?
Maximum gross vehicle weight is about 110,180 kg (242,900 lb). Reported payload/load capacity varies by source and configuration, ranging from roughly 55 to 63 metric tonnes (about 61-69 US tons), so treat the exact payload figure as configuration-dependent.
What replaced the Komatsu HD605-7E0?
The -7 generation (HD605-7/7E0/7R) was superseded by the HD605-8 and HD605-8E0, which stepped up to the SAA6D170E-7 engine at roughly 578 kW (775 HP), and the lineup was later replaced again by the HD605-10 with a further-tuned SAA6D170E-7 engine and higher-strength steel construction.
What HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) owners discuss
What engine is actually in the HD605-7E0 (S/N 8001-up, ecot3/overseas version), and what do owners say about its reliability?
This configuration runs the Komatsu SAA6D170E-5, a turbocharged inline-six diesel rated around 551 kW (739 hp) gross / 533 kW (715 hp) net, built to ecot3/Tier 3 (EU Stage IIIA) emissions with a heavy-duty electronically controlled high-pressure common-rail (HPCR) fuel system, variable-geometry turbo, and air-to-air aftercooling. Importantly, this "E0/overseas" build retains cooled exhaust gas recirculation (EGR) with electronic-over-hydraulic dual valve control - unlike the later HD605-7R (S/N 15001-up), which was built without EGR for markets that didn't require it. Community consensus is that the base 170-series long block is a proven, long-serving Komatsu haul-truck engine platform, but the EGR cooler is the component owners and independent shops flag most: soot and hydrocarbon deposits build up inside it over time, and there's enough demand for aftermarket heavy-duty replacement EGR coolers for this engine family that internal fouling/cracking is treated as a real, recurring wear item rather than a rare fluke. Reported symptoms of a failing cooler include unexplained coolant loss, excess white smoke, or rough idle. Because this affects the emissions and cooling system together, have your dealer or engine specialist verify EGR cooler condition and coolant history on any machine you're evaluating.
What's the known issue with the dump body hoist cylinders, and is it safety-related?
A recurring failure mode discussed around Komatsu rigid-frame haul trucks with this hoist design involves the hoist limit switch that is meant to stop the cylinders at full body-up travel. If that switch is worn, misadjusted, or not maintained, the cylinders can be driven past their intended limit, producing a repeated "slide-hammer" jolt between the piston and the cylinder head each cycle. Over time this stresses the cylinder end fasteners and mounting structure and has led to documented cylinder/mounting failures on similarly designed Komatsu rigid dump trucks. Because an uncontrolled hoist failure with a raised or dumping body is a serious safety hazard, this is a case where preventive checking matters: have your dealer verify the hoist limit switch calibration and cylinder mounting condition rather than relying on visual inspection alone.
What do mechanics recommend checking on the transmission and torque converter?
The HD605-7E0 uses a full-powershift transmission (torque converter drive in first gear, lockup direct drive in higher ranges) paired to the SAA6D170E-5. The most consistently repeated piece of shop-floor advice across Komatsu haul-truck maintenance discussions is to lean on scheduled oil sampling rather than waiting for symptoms: a transmission/converter oil sample coming back clean generally means converter wear isn't yet the issue, while elevated aluminum readings point toward bushing or thrust-washer wear inside the torque converter and warrant closer inspection before a hard failure occurs. Shift quality complaints or slipping/flare on gear changes are the usual field symptoms that trigger this sampling in the first place.
Is there a common wear pattern with the front suspension, since this is a rigid-frame truck rather than a tracked machine?
Yes - the HD605-7 series (including the 7E0/overseas variant) uses a MacPherson strut-type independent front suspension with an A-arm linking each wheel to the main frame. Across the HD465-7/HD605-7 family, the front suspension struts are the component most often brought up as a wear item: nitrogen/oil charge loss and seal leaks at the strut cylinders show up as a softer or unevenly leaning ride, uneven tire contact, or visible oil weeping at the strut body over time. This is treated as routine wear-and-maintenance territory (checking nitrogen precharge and seals) rather than a design defect, but it's worth budgeting for on any machine with meaningful hours.
How does the braking/retarder system behave, and what should operators watch for on long grades?
The rear axle uses large-capacity, continuously oil-cooled wet multiple-disc brakes that double as the service retarder, paired with an Automatic Retard Speed Control (ARSC) function that holds a set descent speed on grade. The instrument cluster carries a dedicated retarder oil temperature gauge and warning light, and operator/maintenance discussion around this truck family consistently emphasizes watching that gauge and keeping the oil cooler airflow and oil level in spec - sustained heavy retarder use with degraded cooling is the scenario that drives disc wear and oil breakdown fastest. Because brake/retarder performance is directly safety-critical on loaded descents, have your dealer verify disc wear and retarder oil condition rather than judging it by feel alone.
What electrical or sensor faults come up most often through KOMTRAX and the monitor panel?
Fault logs on this engine/monitor generation commonly show sensor-out-of-range codes for the atmospheric (ambient) temperature sensor, the transmission oil temperature sensor, and the retarder oil temperature sensor, alongside KOMTRAX communication faults such as GPS antenna disconnection or open circuits in the monitoring/telematics wiring. Consistent with broader heavy-equipment electrical experience (not unique to this model), a large share of these codes trace back to corroded or chafed harness connectors at flex points and rubber-boot connections that have let moisture in over years of service, rather than the sensor element itself having failed. Community advice is to check connectors and grounds first before condemning a sensor.
What should a buyer check before purchasing a used HD605-7E0 (S/N 8001-up, ecot3/overseas version)?
Beyond hours and general condition, buyers and inspectors focused on this model typically prioritize: pulling KOMTRAX/VHMS history for fault trends and duty cycle rather than trusting the hour meter alone; inspecting the hoist cylinders and confirming the hoist limit switch is correctly calibrated (a neglected switch is the root cause behind the known slide-hammer cylinder failure mode); checking the front MacPherson struts for nitrogen/oil leaks or ride sag; pulling oil samples from the transmission/torque converter, final drives, and axle housings to screen for wear metals before committing; reviewing EGR cooler and coolant history given the known fouling tendency on this engine family; inspecting frame rails and body/hoist mounting points for cracking, which is typical wear territory on any high-cycle rigid dump truck; checking tire wear and matching across the 24.00-35 fitment; and confirming wet-disc brake/retarder pad wear and harness/connector condition at flex points. Given the safety implications of the hoist and brake/retarder systems specifically, have your dealer verify those two systems formally as part of any pre-purchase inspection.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific HD605-7E0(S/N 8001-UP (ecot3; Overseas Version)) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.