Komatsuhydraulic shovels(no series)
Komatsu H485S-1(S/N G12016)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu H485S-1 is an ultra-class hydraulic mining shovel built on Demag heritage engineering, configured as a face shovel for hard-rock and high-production mine loading. Early production machines were introduced around 1986 as the largest hydraulic mining shovel of their era, powered by a single MTU V16 diesel rated at roughly 1,592 kW (2,135 hp); later production shifted to a twin-engine arrangement totaling roughly 2,237 kW (3,000 hp) combined. Operating weight spans a wide range across the production run, from roughly 475-550 tonnes on earlier builds to about 639-640 tonnes on later, heavier-configured units, with bucket capacities offered from about 23 to 33 cubic meters depending on configuration. The line traces to Demag's mining shovel business, later folded into Komatsu, and the H485S-1 is regarded as a forerunner to Komatsu's later, distinct PC8000-class hydraulic shovel.
Across the H485S-1 production run, the biggest change was the move from a single large diesel to a twin-engine power section as buckets and operating weights grew, giving mines more digging force and some power-train redundancy on a machine this critical to production. Structural and hydraulic system capacity scaled up in step with the weight and bucket-size increases seen across the run. In today's used and parts market, surviving H485S-1 units are rare, mostly working out their service lives at legacy hard-rock and metal mines rather than trading hands often. Value centers on major components — hydraulic pumps, swing drive, undercarriage, and structural front-end parts — since replacement machines of this class and vintage are effectively unobtainable and owners depend on rebuild and exchange programs to keep units running.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu H485S-1(S/N G12016) specifications
Engine
| Engine (early production) | Single MTU V16 diesel engine, approximately 1,592 kW (2,135 hp). Exact MTU model designation not published for this serial range — verify with dealer. |
| Engine (later production) | Later-build machines in this range moved to a twin-engine layout. Combined rated output is documented around 2,237 kW (3,000 hp) total; individual engine make/model per side not confirmed for this specific unit. |
| Configuration for S/N G12016 | Not confirmed which engine configuration (single vs twin MTU) applies to this exact serial — treat as running-change territory and verify with the OEM shop manual for this range. |
| Emissions tier | Pre-dates modern emissions-tier regulation; no EPA/EU tier rating published for this machine. |
Weights
| Operating weight (early/lighter build) | Approximately 475 to 550 t (1,047,000 to 1,213,000 lb) as originally introduced. |
| Operating weight (later/heavier build) | Approximately 639 to 640 t (1,409,000 to 1,411,000 lb) on later production configurations — varies by configuration/series. |
| Ground pressure | Not documented for this serial range — verify with your dealer. |
Dimensions
| Transport length/width/height | Not documented for this exact serial range — verify with your dealer or the OEM shop manual. |
| Track gauge / undercarriage width | Not documented for this exact serial range — verify with your dealer. |
| Ground clearance | Not documented for this exact serial range — verify with your dealer. |
Performance
| Bucket capacity | Ranged from approximately 23 m³ (30 cu yd) on early production units up to 33 m³ (43 cu yd) on later units. One documented 1989-built unit carried a 26 m³ front-shovel bucket; a separately documented mid-1990s unit carried a 31.5 cu yd bucket. Bucket size varies by configuration/series. |
| Breakout force | Approximately 214,000 kg (472,500 lb) documented on a heavier-configuration unit; not confirmed as applicable to every build in this range. |
| Loading rate | Approximately 1,500 m³/hour of hard rock, clay, and sandstone documented for one in-service unit. |
| Travel speed | Not documented for this exact serial range — verify with your dealer. |
| Gradeability | Not published for this model. |
Service capacities (summary)
| Fuel tank | Not documented for this exact serial range — verify with your dealer. |
| Hydraulic system | Not documented for this exact serial range — verify with your dealer. |
| Engine oil | Not documented for this exact serial range — verify with your dealer. |
| Cooling system | Not documented for this exact serial range — verify with your dealer. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
H485S-1(S/N G12016) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Cooling system | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Fuel tank | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Swing/travel drive compartments | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Final drives (each) | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Hydraulic system and tank | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Grease points | Spec only, no volume figure published for this machine | Not documented for this exact serial range — verify with your dealer |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu H485S-1(S/N G12016) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the H485S-1(S/N G12016) beyond the schedule
Predictive maintenance & fluid analysis
This machine's power section, whether the early single MTU V16 or the later twin-engine arrangement built into this serial range, calls for scheduled oil sampling rather than guesswork. Pull hydraulic oil, engine oil, and final drive gear oil samples at each service interval and track wear-metal trends, since replacement pumps and engines are scarce and costly to source for a shovel this size. Watch coolant condition closely on the turbocharged diesel section to catch cavitation erosion before it reaches the block.
Corrective & common repairs
Expect wear concentrated at the boom foot, stick, and bucket linkage pins carrying the shovel's dig forces, plus the swing bearing and gear under constant face-loading cycles. Track pad, sprocket, and roller wear runs hard on an undercarriage this heavy, so inspect and re-torque track hardware on schedule. Hydraulic hose chafing near the swing frame and cylinder rod-seal leaks are the most common field repairs reported on shovels of this class and vintage.
Overhaul & rebuild points
Given the H485S-1's age and rarity, major work centers on the main hydraulic pumps, swing drive, and engine top end rather than routine parts swaps. Plan structural inspection of the boom, stick, and revolving frame welds at major overhaul intervals, since fatigue cracking is the primary risk on a shovel this size after decades of service. Source rebuilt or exchange components where possible, as new-production parts for this exact serial range are limited.
Seasonal & environment servicing
Mine-site duty exposes this shovel to heavy dust loading on the air intake and cooling cores, so clean radiator and oil cooler fins and check air cleaner restriction more often in dry, dusty pits. In cold climates, pre-heat engine oil and coolant before startup given the size of the power section, and confirm hydraulic oil viscosity grade matches ambient swing. Wet-season sites demand extra attention to track and pin-bushing lubrication to keep mud from accelerating undercarriage wear.
H485S-1(S/N G12016) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 358 601 40 | Return Oil Filter, Assembly | Lubrication service | Check fitment → |
| 449 968 40 | Service Element | Scheduled service item | Check fitment → |
| 440 479 40 | Aeration Filter, Assembly | Scheduled service item | Check fitment → |
| 592 448 40 | Hydraulic. Filter, Assembly | Scheduled service item | Check fitment → |
| 592 450 40 | Hydraulic. Filter, Assembly | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
H485S-1(S/N G12016) attachments & work tools
Front attachment / bucket configuration
Delivered as a face-shovel front with a dedicated dipper (stick) and bolt/pin-mounted bucket sized to this class of hydraulic mining shovel. Backhoe front and frontless (bare boom, no bucket fitted) factory configurations are common across this size class of hydraulic mining shovel, though a documented backhoe option specific to this exact serial range was not found — verify with your dealer.
Bucket mounting / coupler system
No quick-coupler is used at this size class. The bucket pins directly to the dipper/stick, matched to the machine at the factory; changing bucket types is a pinned mechanical swap, not a hydraulic quick-hitch operation.
GET (ground engaging tools) / wear parts
Heavy-duty bolt-on or pin-retained bucket teeth, adapters, and lip shrouds protect the cutting edge and sidewalls, typical for a shovel of this weight class working abrasive rock and ore. Heel and wing shrouds are also standard wear protection on the bucket body.
Work-equipment cylinders and hydraulic arrangement
Boom, arm (dipper), and bucket functions are driven by dedicated hydraulic cylinders sized for the shovel's digging forces; these are factory-matched to the front attachment and are not field-interchangeable with smaller-class components. Any optional front change (e.g., face shovel to backhoe) requires a matched factory kit rather than an aftermarket retrofit, given the scale of the machine.
Undercarriage and track options
Track shoe/pad width options are typically offered on shovels in this class to manage ground bearing pressure for different underfoot conditions; specific pad-width offerings for this serial range are not confirmed in available documentation.
Counterweight and guarding configuration
Counterweight and structural guarding are set as part of the machine's factory configuration for this size class rather than offered as user-selectable aftermarket options; changes are handled through Komatsu engineering rather than a standard options list.
All H485S-1(S/N G12016) assemblies by section
Every catalogued assembly group for the Komatsu H485S-1(S/N G12016). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
* = Variations From Page:
Komatsu : H485s-1(S/N G12016) : * = Variations From Page :
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Accumulator
| 00***98 | Test Socket | 2 |
| 21***99 | Pipe, Assembly. ? 20 Bulk Ware, State Length Required | 2 |
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Chain Hoist
| 00***98 | Spring | 1 |
| 11***99 | Cable Clamp | 5 |
| 30***99 | Cable Clamp | 6 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Diaphragm-Type Accumulator
| 00***98 | Test Socket | 2 |
| 21***99 | Pipe, Assembly. ? 20 Bulk Ware, State Length Required | 2 |
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Electric Heating
| 25***40 | Breather Up To 06 122 | 2 |
| 27***40 | Electr. Space Heater 3000 W /220 V | 2 |
| 30***99 | Screw | 16 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Gear Motor
| 30***99 | Bolt 25 mm Lg | 4 |
| 30***99 | Lock Washer | 4 |
| 30***99 | Bolt | 20 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Junction Box
| 30***99 | Bolt | 2 |
| 30***99 | Bolt | 3 |
| 30***99 | Bolt | 2 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Modification Kit - Load Control
| 05***40 | Ground Wire - Series Terminal | 18 |
| 08***40 | Double-Bit Key ? 3.2 | 0 |
| 26***40 | Pulsing Relay (Movement Signal) | 1 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Sealing Flange
| 00***98 | Grease Nipple | 3 |
| 25***40 | Piston Guide Ring | 5 |
| 25***40 | O-Ring | 1 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Shock Absorber
| 30***99 | Bolt | 2 |
| 30***99 | Screw | 2 |
| 30***99 | Bolt 25 mm Lg | 2 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Sprocket
| 30***99 | Bolt 25 mm Lg | 4 |
| 30***99 | Lock Washer | 4 |
| 30***99 | Bolt | 20 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Travelling Gear
| 25***40 | Hv-Washer | 24 |
| 30***99 | Screw | 8 |
| 30***99 | Bolt | 4 |
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Wear And Tear Parts - Back
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Wear And Tear Parts - Bowl
Komatsu : H485s-1(S/N G12016) : * = Variations From Page : : Panel
Annex
Komatsu : H485s-1(S/N G12016) : Annex : Basic Schematic
Komatsu : H485s-1(S/N G12016) : Annex : Colour : Chrome Yellow
Komatsu : H485s-1(S/N G12016) : Annex : Electric Schematic
Komatsu : H485s-1(S/N G12016) : Annex : Electric Schematics :
Komatsu : H485s-1(S/N G12016) : Annex : Hydraulic Schematics :
Komatsu : H485s-1(S/N G12016) : Annex : Tools And Accessories
Bullclam Bucket Attachment
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : --Hydraulic Cylinder
| 00***98 | Grease Nipple | 3 |
| 00***98 | O-Ring | 1 |
| 22***40 | Support Ring | 1 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : -Clam Cylinder, R.H./L.H.
| 26***40 | Connecting Block | 2 |
| 30***99 | Cover Plate | 4 |
| 30***99 | Bolt ? 16 mm | 4 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : -Hydraulic Cylinder
| 00***98 | Grease Nipple | 4 |
| 25***40 | O-Ring | 1 |
| 31***99 | Screw | 12 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Boom 7,6 M
| 00***98 | O-Ring | 20 |
| 30***99 | Bolt | 4 |
| 30***99 | Bolt Pin Lock From S/No: 06 120 | 16 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Boom Cylinder, L.H.
| 30***99 | Cover Plate | 6 |
| 31***99 | Screw | 4 |
| 31***99 | Screw (Standard) | 8 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Boom Cylinder, R.H.
| 30***99 | Cover Plate | 6 |
| 31***99 | Screw | 4 |
| 31***99 | Screw (Standard) | 8 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Bullclam Bucket 33,0 M? - (1,8) Esco
| 00***98 | Grease Nipple | 2 |
| 00***98 | Union | 2 |
| 14***40 | Half Flange | 16 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Bullclam Bucket Cylinder, R.H./Center/L.H.
| 00***98 | O-Ring | 1 |
| 21***99 | Pipe ? 10x270 Lg. Bulk Ware, State Length Required | 0 |
| 30***99 | Screw | 4 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : General View
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Pin Sealing, Bucket - Bucket Cylinder
| 24***40 | Seal Ring | 6 |
| 50***98 | Hex Head Bolt 6kt | 12 |
| 62***40 | Seal Fixing Assembly. Consist Of Fig.No 08,09,10 | 6 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Pin Sealing, Stick - Bucket
| 31***99 | Bolt (Standard) | 8 |
| 62***40 | Seal Fixing Consist. Of Fig-Nos: 03-05 | 4 |
| 62***40 | Freeze-In Bush | 4 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Stick 5,7 M
| 00***98 | O-Ring | 18 |
| 30***99 | Bolt Pin Lock From S/No: 06 120 | 12 |
| 30***99 | Bolt | 28 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Stick Cylinder, L.H.
| 30***99 | Bolt | 2 |
| 31***99 | Screw | 4 |
| 31***99 | Screw | 4 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Stick Cylinder, R.H.
| 30***99 | Bolt | 2 |
| 31***99 | Screw | 4 |
| 31***99 | Screw | 4 |
Komatsu : H485s-1(S/N G12016) : Bullclam Bucket Attachment : Wear And Tear Parts 33,0 M?
| 29***40 | Snap Ring | 8 |
| 51***40 | Pin | 4 |
| 60***40 | Base | 21 |
Drive
Komatsu : H485s-1(S/N G12016) : Drive
Komatsu : H485s-1(S/N G12016) : Drive : -Aspiration Arrangement
| 30***99 | Screw | 22 |
| 30***99 | Bolt 20 mm Lg | 6 |
| 30***99 | Bolt | 12 |
Komatsu : H485s-1(S/N G12016) : Drive : -Coupling
| 30***99 | Bolt 20mm Lenght | 4 |
| 30***99 | Bolt | 10 |
| 31***99 | Socket Head Cap Screw | 2 |
Komatsu : H485s-1(S/N G12016) : Drive : -Electric Motor
| 36***99 | Roller Bearing | 1 |
| 50***98 | Ball Bearing | 2 |
| 57***40 | Electric Motor Assembly | 1 |
Komatsu : H485s-1(S/N G12016) : Drive : -Fan Pump (Oil Cooler)
| 00***98 | O-Ring | 1 |
| 17***40 | Screw Plug | 3 |
| 31***99 | Screw | 7 |
Komatsu : H485s-1(S/N G12016) : Drive : -Gear Oil Pump (Pdg)
| 35***40 | Hydraulic.-Pump, Assembly | 1 |
| 69***13 | Repair Kit Consist. Of Seal Kit And Fig-Nos: 05,08 And 14 | 0 |
| 75***52 | Cover | 1 |
Komatsu : H485s-1(S/N G12016) : Drive : -Lube Oil Pump (Hp)
| 35***40 | Hydraulic.-Pump, Assembly | 1 |
| 69***10 | Seal Kit Fig-Nos: 02,04,06,07 And 21 | 0 |
| 75***20 | Circlip | 1 |
Komatsu : H485s-1(S/N G12016) : Drive : -Main Pump (Hp)
| 00***98 | O-Ring | 2 |
| 17***40 | Screw Plug | 2 |
| 17***40 | Union | 3 |
Komatsu : H485s-1(S/N G12016) : Drive : -Mesuring And Pilot Pump
| 31***99 | Screw | 2 |
| 31***99 | Screw | 4 |
| 34***99 | Circlip | 1 |
Komatsu : H485s-1(S/N G12016) : Drive : -Pump Distributor Gear
| 00***98 | Shaft Seal | 1 |
| 00***98 | O-Ring | 5 |
| 00***98 | Union | 4 |
Komatsu : H485s-1(S/N G12016) : Drive : Aeration Equipment
| 00***98 | Hose Clip | 2 |
| 30***99 | Bolt 20 mm Lg | 8 |
| 33***99 | Nut M8 | 8 |
Komatsu : H485s-1(S/N G12016) : Drive : Engine : Siemens
Komatsu : H485s-1(S/N G12016) : Drive : Inst. Pump Distributor Gear
| 05***40 | Cable Protection Hose Pg 7 Bulk Ware, State Length Required | 0 |
| 08***40 | Quick Disconnect Coupling | 1 |
| 08***40 | Protection Cap | 1 |
Komatsu : H485s-1(S/N G12016) : Drive : Lube Lines - Pdg
| 00***98 | Union | 8 |
| 18***40 | Hose Fittings | 2 |
| 25***40 | Hose Fittings | 11 |
Komatsu : H485s-1(S/N G12016) : Drive : Mounting Electric Motor
| 25***40 | Hv-Washer | 8 |
| 30***99 | Bolt | 36 |
| 30***99 | Bolt (Standard) | 2 |
Komatsu : H485s-1(S/N G12016) : Drive : Output :
Komatsu : H485s-1(S/N G12016) : Drive : Power Frame Mounting
| 25***40 | Hv-Washer | 16 |
| 31***99 | Washer | 36 |
| 33***99 | Nut (Standard Equipment) | 16 |
Komatsu : H485s-1(S/N G12016) : Drive : Pumps Mounting (Standard)
| 30***99 | Bolt | 4 |
| 30***99 | Screw | 4 |
| 30***99 | Srew | 4 |
Komatsu : H485s-1(S/N G12016) : Drive : Serial-No. :
Komatsu : H485s-1(S/N G12016) : Drive : Series :
Komatsu : H485s-1(S/N G12016) : Drive : Type : 1 Rq 7 567-4
Electric
Komatsu : H485s-1(S/N G12016) : Electric : -Head Light
| 00***98 | Bolt | 2 |
| 34***99 | Lock Washer | 2 |
| 35***40 | Headlamp, Without Lamp | 1 |
Komatsu : H485s-1(S/N G12016) : Electric : -Junction Box
| 05***40 | Ground Wire - Series Terminal | 6 |
| 25***40 | Housing, Empty | 1 |
| 32***99 | Screw | 2 |
Komatsu : H485s-1(S/N G12016) : Electric : -Main Switch Box
| 05***40 | Ground Wire - Series Terminal | 18 |
| 08***40 | Double-Bit Key ? 3.2 | 0 |
| 26***40 | Pulsing Relay (Movement Signal) | 1 |
Komatsu : H485s-1(S/N G12016) : Electric : -Slip Ring
| 05***40 | Ground Wire - Series Terminal | 3 |
| 16***40 | Double-Bit Key ? 5.2 | 1 |
| 30***99 | Bolt | 2 |
Komatsu : H485s-1(S/N G12016) : Electric : -Switch Cabinet
| 32***40 | Sensor | 1 |
| 69***73 | Overvoltage Limiter | 3 |
| 69***73 | Vacuum Contactor | 1 |
Komatsu : H485s-1(S/N G12016) : Electric : -Switch Cabinet (Mv-Part)
| 30***99 | Bolt | 4 |
| 30***99 | Screw | 20 |
| 30***99 | Bolt 25 mm Lg | 3 |
Komatsu : H485s-1(S/N G12016) : Electric : -Switch Cabinet (Ns-Part)
| 27***40 | Cable Union Pg 21 | 4 |
| 27***40 | Cable Union Pg 29 | 4 |
| 30***99 | Bolt 20 mm Lg | 10 |
Komatsu : H485s-1(S/N G12016) : Electric : Batteries
| 08***40 | Rubber Plate 20x430x490 | 8 |
| 27***40 | Cable Protection Hose Pg 21 Bulk Ware, State Length Required | 0 |
| 30***40 | Battery, 12 V 200 Ah | 4 |
Komatsu : H485s-1(S/N G12016) : Electric : Cab Support
| 05***40 | Ground Wire - Series Terminal | 2 |
| 25***40 | Housing, Empty | 1 |
| 27***40 | Cable Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Electric : Control Blocks
| 00***98 | Clamp 15/15 | 20 |
| 25***40 | Housing, Empty | 3 |
| 32***99 | Screw | 4 |
Komatsu : H485s-1(S/N G12016) : Electric : Control Plate
| 00***98 | Clamp 12/15 | 15 |
| 00***98 | Half Clamp | 2 |
| 25***40 | Rubber Grommet | 1 |
Komatsu : H485s-1(S/N G12016) : Electric : Electr. Motor - Cables
| 30***99 | Bolt | 8 |
| 34***99 | Locking Plate | 8 |
| 44***40 | Cable Assembly | 1 |
Komatsu : H485s-1(S/N G12016) : Electric : General View
| 25***40 | Housing, Empty | 2 |
| 25***40 | Limit Switch | 2 |
| 30***99 | Bolt (Standard) | 4 |
Komatsu : H485s-1(S/N G12016) : Electric : Lighting Equipment
| 00***98 | Clamp 15/15 | 100 |
| 05***40 | Ground Wire - Series Terminal | 10 |
| 15***40 | Halogen Lamp | 4 |
Komatsu : H485s-1(S/N G12016) : Electric : Mounts - Switch Cabinet
| 25***40 | Hv-Washer | 8 |
| 50***98 | Bolt Cold Weather Design 230 Lg | 4 |
| 50***98 | Bolt | 4 |
Komatsu : H485s-1(S/N G12016) : Electric : Mounts, Switch Cabinet
| 30***99 | Bolt | 7 |
| 30***99 | Screw | 4 |
| 34***99 | Lock Washer | 11 |
Komatsu : H485s-1(S/N G12016) : Electric : Oil Tank
| 25***40 | Housing, Empty | 1 |
| 32***99 | Cross Connection | 4 |
| 32***40 | Cable Awg 12 Sw Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Electric : Slip Ring Mounting
| 30***99 | Bolt | 4 |
| 30***99 | Bolt | 8 |
| 31***99 | Bolt (Standard) | 6 |
Komatsu : H485s-1(S/N G12016) : Electric : Starting Transformer - Cables
| 30***99 | Screw | 8 |
| 32***40 | Thread Pin | 5 |
| 50***98 | Thread Pin | 6 |
Komatsu : H485s-1(S/N G12016) : Electric : Starting Transformer Arr.
| 30***99 | Screw | 4 |
| 30***99 | Bolt | 20 |
| 30***99 | Bolt | 12 |
Komatsu : H485s-1(S/N G12016) : Electric : Warning System
| 00***98 | Clamp 15/15 | 10 |
| 05***40 | Cable Shoe | 3 |
| 05***40 | Cable Protection Hose Pg 7 Bulk Ware, State Length Required | 0 |
Fire Extinguishing Equipment
Komatsu : H485s-1(S/N G12016) : Fire Extinguishing Equipment : Fire Extinguishing Equipment
| 21***99 | Pipe 1/2 | 0 |
| 25***40 | Hose Nw 5 Bulk Ware, State Length Required | 0 |
| 25***40 | Hose Fittings | 8 |
General View
Komatsu : H485s-1(S/N G12016) : General View : General View
Komatsu : H485s-1(S/N G12016) : General View : General View Superstructure
Komatsu : H485s-1(S/N G12016) : General View : General View Undercarriage
Komatsu : H485s-1(S/N G12016) : General View : Machine-Maintenance Parts
| 25***40 | Air Cleaner In Switch Cabinet | 4 |
| 26***40 | Air Cleaner, Cabin Supercharger | 1 |
| 32***40 | Bleeder Valve, Travelling Gear | 10 |
Hydraulic
Komatsu : H485s-1(S/N G12016) : Hydraulic : --Pressure Connecting Stage
| 10***65 | O-Ring | 1 |
| 49***40 | Pressure Sequence Stage Assembly | 1 |
| 50***98 | O-Ring | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : --Pressure Relief Valve
| 10***65 | O-Ring | 1 |
| 32***40 | Pressure Relief Valve, Assembly. Without Pressure Adjustment | 1 |
| 50***98 | O-Ring | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : --Primary-Prv
| 10***65 | O-Ring | 1 |
| 46***40 | Valve, Assembly. (W/O Pressure Adjustment) | 1 |
| 50***98 | O-Ring | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -2fold H.P. Filter
| 31***99 | Plug | 2 |
| 31***99 | Screw | 8 |
| 33***99 | Seal Ring | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Accumulator
| 23***40 | Pressure Accumulator, Assembly (Std.) | 1 |
| 26***40 | Pressure Accumulator (Tt), Assembly | 1 |
| 33***99 | Seal Ring | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Aeration Filter
| 33***99 | Nut | 1 |
| 44***40 | Aeration Filter, Assembly | 1 |
| 69***89 | Socket Housing | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Anticavitation Valve
| 35***40 | Anticavitation Valve, Assembly | 1 |
| 50***98 | O-Ring | 1 |
| 75***73 | Seal Ring To Fig-No. 06 | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Brake Valve
| 00***98 | O-Ring | 2 |
| 25***40 | Valve Disk | 4 |
| 25***40 | Compression Spring | 4 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Control Block Dn 52 Center
| 00***98 | O-Ring | 8 |
| 00***98 | O-Ring | 8 |
| 25***40 | Screw Plug | 16 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Control Block Dn 52 L.H.
| 00***98 | O-Ring | 8 |
| 00***98 | O-Ring | 8 |
| 25***40 | Screw Plug | 16 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Control Block Dn 52 R.H.
| 00***98 | O-Ring | 8 |
| 00***98 | O-Ring | 8 |
| 25***40 | Screw Plug | 16 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Control Plate
| 10***65 | O-Ring | 2 |
| 35***40 | Control Plate Assembly | 1 |
| 50***98 | O-Ring | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Fan Motor
| 31***99 | Screw | 2 |
| 31***99 | Screw | 4 |
| 34***99 | Circlip | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Hydr. Filter
| 18***40 | Plug, Assembly | 1 |
| 59***40 | Hydraulic. Filter, Assembly | 1 |
| 60***40 | Plug | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Non-Return Valve
| 00***98 | O-Ring | 1 |
| 18***40 | Plug, Assembly | 1 |
| 25***40 | O-Ring | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -One-Way Restrictor
| 00***98 | Seal Ring | 1 |
| 20***40 | O-Ring | 1 |
| 31***99 | Bolt | 4 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Pressure Relief Valve
| 31***99 | Plug | 1 |
| 31***99 | Eyebolt | 2 |
| 31***99 | Screw | 6 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Pump Unit
| 31***99 | Screw | 8 |
| 34***99 | Circlip | 2 |
| 34***99 | Circlip | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Return Oil Filter
| 10***65 | O-Ring | 1 |
| 33***99 | Nut | 2 |
| 33***99 | Nut | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Secondary-Prv
| 35***40 | Valve, Assembly., Adjusted 350 Bar | 1 |
| 35***40 | Valve, Assembly., Adjusted 150 Bar | 1 |
| 62***40 | Valve, Assembly., Adjusted 320 Bar | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Throttle Check Valve
| 20***40 | O-Ring | 1 |
| 31***99 | Bolt | 4 |
| 31***99 | Screw | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : -Valve Block
| 15***40 | Test - Screw Coupling | 1 |
| 25***40 | Screw Plug | 2 |
| 31***99 | Eyebolt | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Arrangement Control Blocks
| 16***40 | Release Valve | 12 |
| 25***40 | Screw Plug | 12 |
| 30***99 | Bolt To Fig-Nos. 02, 03, 06-08 | 3 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Brake Valve Arr.
| 00***98 | Union | 2 |
| 18***40 | Hose Fittings | 2 |
| 21***40 | Hose Fittings | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Control - Brake Valve
| 14***40 | Shuttle Valve | 2 |
| 18***40 | Connection Plate | 2 |
| 21***99 | Pipe ? 10x270 Lg. Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Control And Leakage Lines, Control Blocks
| 21***99 | Pipe ? 12 Ca 300mm Bulk Ware, State Length Required | 0 |
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Hose Fittings | 24 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Control Blocks - Rotary Joint
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Screwed Fittings | 1 |
| 25***40 | Hose Fittings | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Control Blocks - Throttle Check Valves
| 00***98 | Seal Ring | 3 |
| 15***40 | Test - Screw Coupling | 8 |
| 31***99 | Screw | 12 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Control Blocks- Manifold
| 30***99 | Bolt | 16 |
| 31***99 | Screw | 12 |
| 31***99 | Screw (Standard) | 64 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Control- And Filter Plate
| 18***40 | Connection Plate | 6 |
| 25***40 | Clamp | 2 |
| 25***40 | Solenoid Valve, Parking Brake (Y5) Zur Feststellbremse, Drehgetriebe | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Distribution Block - Boom
| 21***99 | Pipe ? 20 Bulk Ware, State Length Required | 4 |
| 30***99 | Bolt | 4 |
| 30***99 | Bolt | 24 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Fan Drive Mounting
| 30***99 | Bolt | 8 |
| 30***99 | Bolt | 12 |
| 30***99 | Bolt | 4 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : H.P. Filter Arrangement
| 00***98 | Clamp 10/15 | 20 |
| 05***40 | Cable Protection Hose Pg 7 Bulk Ware, State Length Required | 0 |
| 15***40 | Test - Screw Coupling | 6 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Hydr. Line, Fan Motor
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Screwed Fittings | 1 |
| 26***40 | Hose Fittings | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Hydr. Line, Fan Pump
Komatsu : H485s-1(S/N G12016) : Hydraulic : Leakage Lines, Slew Gear Motors, Control Lines, Slew Gear Brakes
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Screwed Fittings | 3 |
| 25***40 | Screwed Fittings | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Load-Sensing
| 21***99 | Pipe ? 10x270 Lg. Bulk Ware, State Length Required | 0 |
| 21***99 | Precision Tubing 18x1,5, Lg 0,13 M Bulk Ware, State Length Required | 0 |
| 26***40 | Hose Assembly. Nw 16x2500 Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Main And Suction Oil Tank
| 30***99 | Screw | 8 |
| 30***99 | Bolt | 16 |
| 34***99 | Lock Washer | 26 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Main Oil Tank
| 21***99 | Pipe ? 35 Bulk Ware, State Length Required | 0 |
| 25***40 | Hose Fittings | 2 |
| 25***40 | Hose Fittings | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Main Oil Tank, Mounting (7400 L)
| 25***40 | Hv-Washer | 12 |
| 25***40 | Maintenance Switch | 1 |
| 26***40 | Cover Tube For Sensor | 3 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Main Oil Tank, Pipes
| 00***98 | Seal Ring | 2 |
| 00***98 | Union | 1 |
| 15***40 | Test - Screw Coupling | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Main Oil Tank, Slider
| 00***98 | O-Ring | 7 |
| 00***98 | Union | 2 |
| 05***40 | Cable Protection Hose Pg 7 Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Main Pump Control
| 00***98 | Test Union | 2 |
| 00***98 | Socket | 3 |
| 15***40 | Test - Screw Coupling | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Manifold - Pipes, Assy.
| 30***99 | Cover Plate | 24 |
| 31***99 | Washer | 4 |
| 31***99 | Screw | 8 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Manifold Arrangement
| 25***40 | Hv-Washer | 4 |
| 30***99 | Bolt | 8 |
| 31***99 | Screw | 12 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Non-Return Valves On Main Pumps
| 31***99 | Bolt | 24 |
| 38***40 | Quad Seal Ring | 12 |
| 48***40 | Intermediate Plate | 6 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Oil Cooler - Hoses, Assy.
| 00***98 | O-Ring | 20 |
| 00***98 | Seal Ring | 4 |
| 14***40 | Half Flange | 16 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Oil Cooler Arrangement
| 30***99 | Bolt | 16 |
| 30***99 | Bolt | 24 |
| 30***99 | Bolt | 28 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Oil Cooler System, Mounting
| 25***40 | Hv-Washer | 8 |
| 48***40 | Oil Cooler System | 1 |
| 50***98 | Bolt Cold Weather Design 230 Lg | 4 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Pipes Control Plate
| 00***98 | Test Union | 1 |
| 00***98 | Test Union | 1 |
| 00***98 | Union | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Pipes, Throttle Check Valves
| 00***98 | Socket | 6 |
| 21***99 | Pipe ? 10x270 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Pressure And Leakage Line At Measuring And Pilot Oil Pump
| 00***98 | O-Ring | 1 |
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Flange Connection | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Pressure Lines
| 15***40 | Test - Screw Coupling | 1 |
| 30***99 | Cover Plate | 4 |
| 30***99 | Bolt | 4 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Pressure Lines, H.P. Filter - Control Blocks
| 30***99 | Bolt | 4 |
| 31***99 | Screw | 24 |
| 35***40 | Hose Assembly. Dn 50x2400 Lg | 3 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Pressure Lines, Main Pumps - H.P. Filter
| 30***99 | Bolt | 0 |
| 30***99 | Bolt | 40 |
| 31***99 | Screw | 24 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Pump Lube Lines
| 00***98 | O-Ring | 1 |
| 17***40 | Half Flange | 2 |
| 21***99 | Pipe ? 15 Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Return Lines
| 00***98 | Seal Ring | 18 |
| 14***40 | Half Flange | 24 |
| 30***99 | Cover Plate | 0 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Return Lines - Control Plate
| 15***40 | Test - Screw Coupling | 1 |
| 17***40 | Union | 1 |
| 25***40 | Hose Fittings | 2 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Return Lines, Secondary Pressure Relief Valves
| 21***99 | Pipe ? 10x270 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Screwed Fittings | 1 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Secondary Pressure Relief Valve
| 00***98 | Test Socket | 2 |
| 15***40 | Test - Screw Coupling | 2 |
| 21***99 | Pipe ? 10x270 Lg. Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Suction Lines (Standard)
| 00***98 | Clamp | 2 |
| 00***98 | Hose Clip | 12 |
| 22***40 | Gasket | 6 |
Komatsu : H485s-1(S/N G12016) : Hydraulic : Suction Tank Mounting (316 L)
| 30***99 | Bolt | 16 |
| 30***99 | Bolt | 17 |
| 33***99 | Bolt | 41 |
Lifting Devices
Komatsu : H485s-1(S/N G12016) : Lifting Devices : -Chain Hoist
Komatsu : H485s-1(S/N G12016) : Lifting Devices : Electric - Service Crane
| 05***40 | Ground Wire - Series Terminal | 2 |
| 25***40 | Housing, Empty | 1 |
| 32***99 | Screw | 2 |
Komatsu : H485s-1(S/N G12016) : Lifting Devices : Service Crane Arr.
| 00***98 | Spring | 1 |
| 11***99 | Cable Clamp | 5 |
| 30***99 | Cable Clamp | 6 |
Operator'S Cab
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : -Air Conditioning Unit
| 31***99 | Screw | 3 |
| 34***99 | Lock Washer | 3 |
| 46***40 | Air Conditioning Unit Assembly | 1 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : -Compressor
| 25***40 | Compressor, Assembly | 1 |
| 69***73 | Upstroke Valve | 1 |
| 69***73 | Valve | 1 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : -Condensor
| 18***40 | Relay | 1 |
| 25***40 | Condensor Assembly | 1 |
| 69***73 | Pressure Switch | 1 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : -Electr. Motor
| 31***40 | Electric Motor 50 Hz /380 V | 1 |
| 44***40 | Electric Motor 60 Hz /575 V | 1 |
| 46***40 | Electric Motor 60 Hz /380 V | 1 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : -Operator'S Cab
| 00***98 | Es-Pin | 2 |
| 00***98 | Es-Pin | 1 |
| 05***40 | Grommet | 2 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : -Operator'S Cab Platform
| 05***40 | Grommet | 1 |
| 08***40 | Band Roller With Intermediate Ring | 4 |
| 26***40 | Air Cleaner, Cabin Supercharger | 3 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : -Operator'S Seat
| 30***99 | Bolt 20 mm Lg | 2 |
| 30***99 | Bolt | 2 |
| 30***99 | Bolt | 1 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : -Operators Panel
| 05***40 | Tab To Fig-No: 43 1,5 - 2,5 | 0 |
| 05***40 | Grommet | 8 |
| 05***40 | Grommet | 1 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : -Sliding Window
| 32***40 | Sliding Window Assembly, L.H | 1 |
| 35***40 | Sliding Window Assembly, R.H | 1 |
| 51***98 | Screw | 16 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Air Conditioning Equipment, Cabin
| 23***40 | Hose Fittings | 1 |
| 23***40 | Hose Fittings | 1 |
| 23***40 | Hose Fittings | 1 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Air Conditioning Equipment, Switch Cabinet
| 23***40 | Hose Fittings | 3 |
| 23***40 | Hose Nw 12 Bulk Ware, State Length Required | 0 |
| 23***40 | Hose Nw 10x Ca. 6000 mm Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Blower (Cabin Supercharger)
| 30***99 | Bolt | 3 |
| 32***40 | Rubber Cord 500 Lg. Bulk Ware, State Length Required | 0 |
| 32***40 | H.P. Blower | 1 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Cabin : Papyrus White
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Drive, Air Condition Compressor
| 00***98 | Bolt | 8 |
| 05***40 | Ground Wire - Series Terminal | 5 |
| 11***40 | Washer | 2 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Electric Heating
| 25***40 | Breather Up To 06 122 | 2 |
| 27***40 | Electr. Space Heater 3000 W /220 V | 2 |
| 30***99 | Screw | 16 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Operator'S Cab Arrangement
| 08***40 | Mirror | 2 |
| 11***40 | Mirror Bracket, R.H | 1 |
| 16***40 | Profiled Joint Ca. 6000 Lg. Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Operator'S Cab Support,Mount.
| 25***40 | Hv-Washer | 8 |
| 30***99 | Bolt Standard 230 Lg. Normaltemperatur | 4 |
| 30***99 | Bolt | 4 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Operator'S Cab, Glazing
| 08***40 | Clamping Section 2800 Lg. (To Fig-Nos. 02,04) Bulk Ware, State Length Required | 2 |
| 08***40 | Filler Section 3000 Lg. Bulk Ware, State Length Required | 2 |
| 30***40 | Rear Window 803x458 | 2 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Operator'S Stand
| 30***99 | Bolt 20 mm Lg | 4 |
| 30***99 | Bolt | 2 |
| 30***99 | Lock Washer | 6 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Protection Roof (With Air Conditioning Equipment, Roof)
| 30***99 | Bolt | 8 |
| 38***40 | Bushing | 8 |
| 40***40 | Flap | 1 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Ventilation System, Switch Cabinet
| 25***40 | Air Cleaner In Switch Cabinet | 4 |
| 30***99 | Bolt | 1 |
| 33***99 | Bolt | 6 |
Komatsu : H485s-1(S/N G12016) : Operator'S Cab : Wipe- And Wash-Equipment
| 05***40 | Grommet | 2 |
| 05***40 | Wiper Motor 120? | 1 |
| 19***40 | Diaphragm Pump | 1 |
Refueling- And Grease Equipment
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : --Lube Pump
| 00***98 | O-Ring To Fig-Nos. 61,62 | 2 |
| 69***14 | Pin | 1 |
| 69***16 | Bush With Thread | 1 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : -Lube Pump Station.
| 21***99 | Pipe ? 10 Bulk Ware, State Length Required | 0 |
| 37***99 | Union | 1 |
| 55***40 | Lube Pump Station Consist. Of Fig-Nos: 02-45 | 1 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : -Metering Valve
| 26***40 | Metering Valve, Assembly | 1 |
| 26***40 | Metering Valve, Assembly | 1 |
| 27***40 | Metering Valve, Assembly | 1 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Bucket (1 - Line)
| 21***99 | Pipe ? 10x270 Lg. Bulk Ware, State Length Required | 0 |
| 26***40 | Hose Ca. 3100 Lg. Bulk Ware, State Length Required | 0 |
| 26***40 | Hose Fittings | 2 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Drip - Pinion Lube Station Arr.
| 00***98 | Pin | 3 |
| 20***40 | Coupler Plug Nw 12.5 | 1 |
| 20***40 | Coupling Sleeve Nw 12.5 | 1 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Electr. Parts
| 04***40 | Dust Cap | 1 |
| 04***40 | Plug | 1 |
| 14***40 | Socket | 1 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Electric Parts
| 04***40 | Dust Cap | 8 |
| 04***40 | Plug | 8 |
| 05***40 | Ground Wire - Series Terminal | 6 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Greases
| 27***40 | Grease T3 Hs -40/-10? C / 50 Kg | 1 |
| 32***40 | Grease T2 Hs -20/+10? C /50 Kg | 1 |
| 50***98 | Adhesive Lubrication Spray | 1 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Lube Lines
| 21***99 | Union ? 12 Bulk Ware, State Length Required | 0 |
| 21***99 | Pipe ? 25x160 Lg. Bulk Ware, State Length Required | 0 |
| 30***99 | Screw | 30 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Lube Lines, Hand Operated
| 00***98 | Grease Nipple | 6 |
| 21***99 | Pipe ? 10x270 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Hose Dn 8 X Ca. 2000 Lg. Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Lube Pumpe Station Arr.
| 00***98 | Pin | 3 |
| 20***40 | Coupler Plug Nw 12.5 | 1 |
| 20***40 | Coupling Sleeve Nw 12.5 | 1 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Pinion Lube Lines
| 21***99 | Pipe ? 12 Ca 300mm Bulk Ware, State Length Required | 0 |
| 26***40 | Nipple | 2 |
| 30***99 | Bolt | 8 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Refueling System
| 00***98 | Clamp 15/15 | 20 |
| 25***40 | Housing, Empty | 1 |
| 25***40 | Hose Nw 20x Ca. 1500 mm Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Stick (1 - Line)
| 00***99 | Clamp | 8 |
| 21***99 | Pipe ? 12 Ca 300mm Bulk Ware, State Length Required | 0 |
| 21***99 | Pipe ? 10x270 Lg. Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Refueling- And Grease Equipment : Boom (1 - Line)
| 00***98 | Clamp 15/15 | 16 |
| 21***99 | Pipe ? 12 Ca 300mm Bulk Ware, State Length Required | 0 |
| 21***99 | Pipe ? 16x50 Lg. Bulk Ware, State Length Required | 6 |
Slew Gear
Komatsu : H485s-1(S/N G12016) : Slew Gear : --Disc Brake
| 08***01 | Shaft Seal | 2 |
| 31***99 | Plug | 8 |
| 33***99 | Seal Ring | 8 |
Komatsu : H485s-1(S/N G12016) : Slew Gear : -Slew Gear
| 00***98 | Union | 1 |
| 00***98 | Union | 1 |
| 21***99 | Precision Tubing 10x1.5 Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Slew Gear : -Slew Gear Motor
| 32***99 | Screw | 8 |
| 32***99 | Screw | 14 |
| 34***99 | Circlip | 1 |
Komatsu : H485s-1(S/N G12016) : Slew Gear : -Slew Ring
| 22***40 | Lip Type Seal Ng 25 X 9.200 mm Bulk Ware, State Length Required | 1 |
| 22***40 | Lip Type Seal Ng 40x11000 Lg. Bulk Ware, State Length Required | 1 |
| 31***99 | Screw | 22 |
Komatsu : H485s-1(S/N G12016) : Slew Gear : Mount. Slew Gear/Motor
| 08***40 | Quick Disconnect Coupling | 2 |
| 08***40 | Protection Cap | 2 |
| 21***99 | Pipe ? 22x70 Lg. Bulk Ware, State Length Required | 2 |
Komatsu : H485s-1(S/N G12016) : Slew Gear : Slew Ring Mounting
| 25***40 | Hv-Washer | 308 |
| 27***40 | Jaw | 1 |
| 32***40 | Compound (2 Lbs) (1,3 Kg.) | 6 |
Superstructure
Komatsu : H485s-1(S/N G12016) : Superstructure : -Steps
| 18***40 | Limit Switch | 1 |
| 30***99 | Cable Clamp | 18 |
| 30***99 | Bolt | 8 |
Komatsu : H485s-1(S/N G12016) : Superstructure : Boom Pin / Counterweight
| 25***40 | Bolt | 4 |
| 30***99 | Bolt | 96 |
| 31***99 | Washer | 96 |
Komatsu : H485s-1(S/N G12016) : Superstructure : Covering, Counterweight - Covering, Machinery House
| 30***99 | Bolt (Standard) | 12 |
| 30***99 | Bolt | 50 |
| 30***99 | Bolt 35 Lg | 15 |
Komatsu : H485s-1(S/N G12016) : Superstructure : Gratings
| 27***40 | Platform | 1 |
| 27***40 | Grating | 4 |
| 27***40 | Grating 480x750 | 4 |
Komatsu : H485s-1(S/N G12016) : Superstructure : Machinery House
| 16***40 | Profiled Joint Ca. 6000 Lg. Bulk Ware, State Length Required | 0 |
| 30***99 | Screw | 40 |
| 30***99 | Bolt | 1 |
Komatsu : H485s-1(S/N G12016) : Superstructure : Protective Grating (Hd-Filter)
| 30***99 | Screw | 8 |
| 40***40 | Pin | 6 |
| 40***40 | Thread Plate | 4 |
Komatsu : H485s-1(S/N G12016) : Superstructure : Steps And Rails
| 27***40 | Grating | 3 |
| 30***99 | Bolt | 8 |
| 30***99 | Bolt (Standard) | 36 |
Undercarriage
Komatsu : H485s-1(S/N G12016) : Undercarriage : --Bevel Gear Assy.
| 00***98 | Shaft Seal | 1 |
| 30***99 | Bolt | 4 |
| 30***99 | Screw To Valve Y11d+Y120 | 4 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : --Disc Brake
| 08***21 | O-Ring | 1 |
| 30***99 | Bolt | 4 |
| 31***99 | Screw Plug | 3 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : --Pressure Relief Valve
| 10***65 | O-Ring | 1 |
| 32***40 | Pressure Relief Valve, Assembly. Without Pressure Adjustment | 1 |
| 50***98 | O-Ring | 1 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : --Tension Arrangement
| 30***99 | Bolt | 4 |
| 30***99 | Screw To Valve Y11d+Y120 | 4 |
| 33***99 | Bolt | 2 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Bottom Roller
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Cable Drum
| 30***99 | Screw To Valve Y11d+Y120 | 6 |
| 30***99 | Bolt 25 mm Lg | 12 |
| 30***99 | Bolt | 6 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Cable Drum - Drive Arr.
| 30***99 | Bolt 25 mm Lg | 4 |
| 30***99 | Lock Washer | 4 |
| 30***99 | Bolt | 20 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Drive Motor
| 32***99 | Screw | 8 |
| 32***99 | Screw | 14 |
| 34***99 | Circlip | 1 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Drive Sprocket
| 25***40 | Hv-Washer | 16 |
| 30***99 | Bolt (Standard Equipment) | 16 |
| 31***40 | Drive Sprocket Hub No Field Repair Item | 1 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Idler Assy.
| 25***40 | Lifetime Seal | 2 |
| 30***99 | Screw | 8 |
| 31***40 | Stop Washer | 2 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Junction Box
| 30***99 | Screw | 20 |
| 30***99 | Screw | 9 |
| 30***99 | Bolt | 14 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Reel Arrangement
| 30***99 | Bolt | 2 |
| 30***99 | Screw | 2 |
| 30***99 | Bolt 25 mm Lg | 2 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Reel, Drive Arrangement
| 30***99 | Bolt | 24 |
| 30***99 | Bolt | 4 |
| 30***99 | Bolt | 2 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Rotary Joint
| 00***98 | Grease Nipple | 2 |
| 30***99 | Bolt | 8 |
| 30***99 | Bolt 25 mm Lg | 8 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Switch Box
| 05***40 | Ground Wire - Series Terminal | 2 |
| 25***40 | Housing, Empty | 1 |
| 27***40 | Cable Union Pg 21 | 1 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Tensioner
| 25***40 | Test-Screw Coupling | 1 |
| 25***40 | O-Ring | 2 |
| 46***40 | Rod Guide Ring | 7 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Travelling Brake Valve
| 00***98 | O-Ring | 2 |
| 00***98 | O-Ring | 2 |
| 00***98 | O-Ring | 2 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Travelling Gear
| 00***98 | O-Ring | 1 |
| 30***99 | Bolt | 12 |
| 30***99 | Bolt | 12 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : -Valve Block
| 00***98 | Union | 1 |
| 15***40 | Union | 2 |
| 21***99 | Pipe ? 20x75 Bulk Ware, State Length Required | 1 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Brake Control
| 21***99 | Pipe, Assembly. ? 15x60 Bulk Ware, State Length Required | 0 |
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
| 25***40 | Screwed Fittings | 5 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Cable Drum : 60hz / 210/120 V
Komatsu : H485s-1(S/N G12016) : Undercarriage : Cable Duct
| 00***98 | Clamp 15/15 | 10 |
| 30***99 | Bolt | 4 |
| 30***99 | Bolt | 4 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Cable Reel Arrangement
| 30***99 | Bolt | 2 |
| 30***99 | Bolt | 3 |
| 30***99 | Bolt | 2 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Carbody / Track Groups
| 30***99 | Screw | 80 |
| 30***99 | Bolt | 32 |
| 34***99 | Lock Washer | 32 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Carbody/Rotary Joint
| 25***40 | Hv-Washer | 6 |
| 30***99 | Bolt To Fig-Nos. 03, 04 + 05 | 4 |
| 31***99 | Washer | 18 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Ladder Assy.
| 23***40 | Threaded Plate | 4 |
| 30***99 | Screw | 8 |
| 30***99 | Bolt | 8 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Leakage Lines
| 21***99 | Pipe ? 12 Ca 300mm Bulk Ware, State Length Required | 0 |
| 21***99 | Pipe Assembly. ? 28 Bulk Ware, State Length Required | 0 |
| 26***40 | Hose Fittings | 4 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Rotary Joint - Drive Motors
| 15***40 | Test - Screw Coupling | 4 |
| 30***99 | Bolt | 8 |
| 31***99 | Washer | 8 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Track Adjusting
| 00***98 | Test Socket | 2 |
| 21***99 | Pipe, Assembly. ? 20 Bulk Ware, State Length Required | 2 |
| 25***40 | Hose Dn 12 X Ca. 4000 Lg. Bulk Ware, State Length Required | 0 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Track Frame
| 25***40 | Hv-Washer | 112 |
| 36***40 | Nut (Cold Weather Design) | 64 |
| 44***40 | Rail Support | 4 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Track Group - Idler Side
| 25***40 | Test-Screw Coupling | 4 |
| 30***99 | Bolt (Standard) | 16 |
| 30***99 | Bolt | 80 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Track Group, 1500 Mm
| 33***99 | Nut (Standard Equipment) | 192 |
| 34***99 | Washer | 384 |
| 42***40 | Bolt | 192 |
Komatsu : H485s-1(S/N G12016) : Undercarriage : Track Group-Dr. Sprocket Side
| 25***40 | Hv-Washer | 24 |
| 30***99 | Screw | 8 |
| 30***99 | Bolt | 4 |
Frequently asked questions
What engine powers the Komatsu H485S-1 hydraulic shovel?
Early production H485S units ran a single MTU V16 diesel rated at roughly 1,592 kW (2,135 hp). Later production shifted to a twin-engine configuration totaling roughly 2,237 kW (3,000 hp) combined. The exact engine configuration fitted to this serial is not confirmed in available documentation — verify against the engine dataplate or your dealer.
What is the operating weight of the Komatsu H485S-1?
Operating weight varies by build and configuration across the production run, from roughly 475-550 tonnes on earlier units up to about 639-640 tonnes on later, heavier-configured machines. Confirm the exact weight for this serial against its dataplate and installed attachment.
What replaced the Komatsu H485S-1 in the lineup?
The H485S-1 is considered a forerunner to Komatsu's later PC8000-class hydraulic mining shovel, developed after Komatsu's acquisition of Demag's mining shovel business. The PC8000 is a distinct, later-generation machine and is not a direct spec match for the H485S-1.
What H485S-1(S/N G12016) owners discuss
What powertrain does the H485S-1 use, and are there known quirks to watch for?
The H485 family, through the S-1 variant, was built around an MTU V16 diesel, one of the largest-displacement engines fitted to any hydraulic shovel of its era. Nobody has written up serial-specific engine behavior for this machine, but the general pattern for MTU's big V-block mining diesels holds: oil condition drives the change interval more than a fixed hour number, and sites that run scheduled oil sampling get far more life out of the engine before a rebuild is due. Early and late production runs of this shovel line used different engine tunes, so pull the actual interval and oil spec from the factory shop manual for this range rather than assuming a generic figure.
What should I expect from the hydraulic system on a machine this size?
The one detail that keeps surfacing about the H485 line is scale: the first unit needed a dedicated tanker truck on site just to keep the hydraulic system topped up, which tells you the reservoir and circuit volume on a shovel this size is well beyond anything in the excavator classes most mechanics work on daily. Expect correspondingly long fluid-change and flush procedures, and expect a leaking fitting or cylinder seal to show up as a real volume loss rather than just a stain on the ground. There is no public record of which seals or valves fail first on this specific serial range, so treat major cylinder or pump work as a job for someone with the factory manual in hand, and have your dealer verify circuit pressures and seal specs before starting that work.
What undercarriage wear patterns are typical for this class of shovel?
Owners of ultra-class hydraulic shovels in this weight range consistently report undercarriage wear (shoes, pins, bushings, rollers) as the dominant running cost, since the components carry weight in the hundreds of tonnes across a footprint that is wide but still heavily loaded per shoe. Track tension and pad wear need checking on a shorter interval than a mid-size excavator, not the same one. No shoe-life or wear-rate figure is published specifically for the H485S-1, so budget undercarriage inspection more frequently than you would on a mid-size machine rather than assuming mid-size wear curves apply.
Are there known electrical or sensor issues on this model?
This is an honest gap. No forum thread or blog discusses sensor faults, fault codes, or electrical gremlins specific to this model. The population of these shovels is small, and most worked at a handful of named opencast or mine sites rather than passing through the kind of high-volume rental fleet that generates forum chatter. If troubleshooting an electrical fault on one of these, the shop manual's wiring diagrams and connector pin-outs for this range are the only reliable reference. Do not assume a fault code or sensor location from a different shovel model carries over.
Why is there so little community discussion of this specific machine online?
The H485 was a mid-1980s Demag design, built in very small numbers, and worked heavy opencast coal and mine sites rather than moving through general equipment auctions or rental fleets. Low production plus specialist end users plus a decades-old build date is exactly why it never built up a forum footprint the way a common excavator model does. What public record exists is mostly period photography and mine-site history rather than owner or mechanic write-ups. Treat any specific maintenance claim about this exact serial with caution and lean on the factory manual over crowd-sourced advice.
What should I check when buying a used H485S-1?
Because so little is published specifically for this shovel, buying one comes down to the same fundamentals as any ultra-class hydraulic shovel, done more carefully given the machine's age and rarity. Pull full maintenance and oil-sample history on the engine. Inspect every hydraulic cylinder and the main pump and swing motor for external and internal leakage. Check undercarriage wear (shoes, pins, bushings, rollers) against remaining life, not just visual condition. Look over the boom, stick, and carbody welds for crack lines, a rust fringe at a weld is the classic tell. Missing maintenance records are a bigger red flag on a machine this old and this rare than on a common excavator, since there is no fallback community knowledge to fill the gap. Given the safety and cost stakes of a hydraulic and structural inspection on a machine this size, have your dealer or an OEM-trained inspector verify condition before you commit to a purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific H485S-1(S/N G12016) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.