Komatsubulldozerlarge (d80 - )
Komatsu D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed))
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu D85ESS-2A (S/N 3034-UP, Overseas Version) is a mid-size swamp and logging class crawler dozer built on Komatsu's D85 platform and marketed as an "Advance Skidder" for wetland, peat, and forestry ground that standard-shoe dozers cannot cross. Power comes from the Komatsu S6D125E-2, a turbocharged, 6-cylinder, 11.04 L diesel rated 149 kW / 200 HP net at 1950 rpm; this is the emissions-compliant version of that engine, installed starting at this exact serial break, replacing the non-emission engine fitted to the earlier S/N 3001-3033 machines of the same overseas line. Bare tractor weight with standard shoes and ROPS canopy runs about 15,420 kg (34,000 lb); factory operating weight with angle blade, multi-shank ripper, and canopy is 20,670 kg (45,570 lb), and total weight shifts further with blade choice (angle, straight-tilt, or semi-U tilt), swamp shoe width (510 to 660 mm), and cab or canopy selection. Komatsu does not publish a firm introduction year for this exact serial/engine break, and the D85ESS-2A line traces back to the earlier D85ESS-2/D85E-SS-2 swamp-dozer family on the same D85 chassis; treat this as one continuous overseas-market production run distinguished mainly by the 3034 engine-emission changeover. Configurations offered include angle, straight-tilt, and semi-U tilt dozer blades, ROPS canopy or an optional all-weather steel cab, and an optional multi-shank ripper.
Across this production run the core driveline changed very little: the same Komatsu torque-converter/powershift transmission, the same wet multiple-disc steering clutch/brake system worked by a single left-hand joystick, and the same oscillating undercarriage with sealed and lubricated track carried through unchanged. The one clearly documented change at the 3034 serial break is the engine itself, updated to meet exhaust-emission requirements, while blade options, hydraulics, undercarriage, and cab choices stayed the same. That kind of long, low-volume production run is typical for swamp and logging dozers: this class serves a narrow but persistent market working palm oil, peat, and forestry ground in Southeast Asia and similar terrain where standard-shoe machines cannot operate, so Komatsu keeps a purpose-built platform in the catalog far longer than mainstream dozer models. For the used and parts market that has two practical effects: complete, well-kept units are scarce and often stay in service well past a typical dozer's working life, and getting the serial break right (3001-3033 versus 3034-up) matters more than usual, since it is the main way to identify which engine-family filters, injection parts, and emission-related components a given machine actually needs.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) specifications
Engine
| Model | Komatsu S6D125E-2 (emission-compliant version fitted from this serial break; earlier S/N 3001-3033-UP overseas machines carried a prior S6D125 series non-emission engine) |
| Type | 4-stroke cycle, water-cooled, direct injection |
| Aspiration | Turbocharged |
| Cylinders | 6 |
| Bore x stroke | 125 mm x 150 mm |
| Piston displacement | 11.04 L |
| Governor | All-speed, mechanical |
| Net power (ISO 9249 / SAE J1349) | 149 kW / 200 HP @ 1950 rpm |
| Net maximum torque | 981 N·m (100 kgf·m) @ 1200 rpm |
| Fan drive | Mechanical |
| Lubrication | Gear pump, forced lubrication, full-flow filter |
| Alternator | 35 A / 24 V |
| Starting motor | 7.5 kW / 24 V |
| Batteries | 140 Ah, 2 x 12 V |
Weights
| Tractor weight (bare machine, standard shoes, ROPS canopy, full fluids/fuel, operator) | 15,420 kg (34,000 lb) |
| Operating weight (with angle dozer, multi-shank ripper, FRP canopy, full fluids/fuel, operator) | 20,670 kg (45,570 lb) |
| ROPS canopy add. weight | +420 kg |
| Steel cab add. weight | +285 kg |
| ROPS canopy for cab add. weight | +340 kg |
| Angle dozer blade add. weight (incl. 540 kg hydraulic control unit) | +2,890 kg blade / +540 kg hyd. unit |
| Straight tilt dozer blade add. weight (incl. 590 kg hydraulic control unit) | +2,220 kg blade / +590 kg hyd. unit |
| Semi-U tilt dozer blade add. weight (incl. 590 kg hydraulic control unit) | +2,520 kg blade / +590 kg hyd. unit |
| Multi-shank ripper weight (incl. hydraulic control unit) | 1,680 kg |
| 560 mm shoe option add. weight | +120 kg |
| 610 mm shoe option add. weight | +230 kg |
| 660 mm shoe option add. weight | +360 kg |
| Configuration note | Factory catalog covers only one chassis/undercarriage configuration for this model (no separate LGP variant published); weight varies with blade type, shoe width, cab/canopy and ripper selection as itemized above |
Dimensions
| Overall length with blade, straight tilt dozer + multi-shank ripper | 5,615 mm (18'5") |
| Overall length with blade, angle dozer | 5,930 mm (19'5") |
| Overall length with blade, semi-U tilt dozer | 5,770 mm (18'11") |
| Overall width (blade width, straight tilt dozer) / transport width | 3,620 mm (11'11") |
| Overall height (transport height) | 3,160 mm (10'4") |
| Width over tracks | 2,170 mm (7'1") |
| Ground clearance | 400 mm (15.7 in), measured with straight tilt dozer and multi-shank ripper fitted |
| Minimum turning radius | 3.4 m (11'2"), as measured by track marks on ground |
| Track shoe width, standard | 510 mm (20 in) single grouser, sealed and lubricated track |
| Track shoe width, options | 560 mm, 610 mm, 660 mm single grouser (22, 24, 26 in) |
| Additional factory drawing callouts (side/front outline, straight tilt dozer + ripper config) | A 2,050 mm; C (blade height) 1,295 mm; D 2,980 mm; E (max blade lift above ground) 1,070 mm; F (max blade drop below ground) 590 mm; G 2,980 mm; J 65 mm; K 1,220 mm; L 2,170 mm; M 950 mm (each side) - reference points per the factory dimensional drawing, duplicated here for completeness alongside the named dimensions above |
Performance
| Travel speed - Forward 1st | 0-3.9 km/h (0-2.4 mph) |
| Travel speed - Forward 2nd | 0-6.8 km/h (0-4.2 mph) |
| Travel speed - Forward 3rd | 0-10.6 km/h (0-6.6 mph) |
| Travel speed - Reverse 1st | 0-5.0 km/h (0-3.1 mph) |
| Travel speed - Reverse 2nd | 0-8.6 km/h (0-5.3 mph) |
| Travel speed - Reverse 3rd | 0-13.4 km/h (0-8.3 mph) |
| Transmission | Komatsu Torqflow: water-cooled 3-element, 1-stage, 1-phase torque converter with planetary gear, multiple-disc clutch powershift; single joystick controls 3 forward / 3 reverse gears and steering |
| Steering system | Single left-hand joystick for all directional movement; wet multiple-disc steering clutches (hydraulically loaded and released) and wet multiple-disc brakes (spring-actuated, hydraulically released); brakes double as service and parking brakes |
| Drawbar pull | Published only as a drawbar-pull-vs-travel-speed chart (curves for 1st, 2nd, 3rd gear); no single peak figure is tabulated. Maximum usable pull depends on traction and total weight of the tractor including mounted equipment |
| Gradeability | Not published as a standalone figure in the factory spec sheet for this model; governed by the drawbar-pull curve and available traction |
| Ground contact area, standard 510 mm shoe | 30,400 cm² |
| Ground contact area, 560 mm shoe option | 33,380 cm² |
| Ground contact area, 610 mm shoe option | 36,360 cm² |
| Ground contact area, 660 mm shoe option | 39,340 cm² |
| Ground pressure, standard configuration | 0.50 kg/cm² (approx. 7 psi / 49 kPa) |
Blades
| Blade capacity range (all types offered) | 3.4 - 6.8 m³ (4.4 - 8.9 yd³) |
| Angle dozer - capacity | 3.4 m³ (4.4 yd³) |
| Angle dozer - width x height | 4,370 mm x 1,070 mm |
| Angle dozer - max lift above ground / max drop below ground | 1,255 mm / 485 mm |
| Angle dozer - max tilt adjustment / blade angle | 400 mm / 25 deg |
| Angle dozer - overall machine length with blade | 5,930 mm |
| Straight tilt dozer - capacity | 4.4 m³ (5.8 yd³) |
| Straight tilt dozer - width x height | 3,620 mm x 1,295 mm |
| Straight tilt dozer - max lift above ground / max drop below ground | 1,070 mm / 590 mm |
| Straight tilt dozer - max tilt adjustment | 460 mm |
| Straight tilt dozer - overall machine length with blade | 5,615 mm |
| Semi-U tilt dozer - capacity | 6.8 m³ (8.9 yd³) |
| Semi-U tilt dozer - width x height | 3,640 mm x 1,565 mm |
| Semi-U tilt dozer - max lift above ground / max drop below ground | 1,070 mm / 590 mm |
| Semi-U tilt dozer - max tilt adjustment | 460 mm |
| Semi-U tilt dozer - overall machine length with blade | 5,770 mm |
| Blade capacity standard | Rated per SAE recommended practice SAE J1265; high tensile strength steel moldboard |
| VPAT blade | Not offered on this model per factory catalog |
Hydraulic system
| System type | Closed-center load sensing system (CLSS) for precise, responsive control and simultaneous operation |
| Pump type | Gear pump |
| Pump capacity (discharge flow at rated engine rpm) | 180 L/min |
| Relief valve setting | 20.6 MPa (210 kgf/cm²) |
| Cylinder type | Double-acting, piston type |
| Blade lift cylinders | 2 cylinders, 95 mm bore |
| Blade tilt cylinder | 1 cylinder, 140 mm bore |
| Ripper lift cylinder | 1 cylinder, 150 mm bore |
| Control valve positions - blade lift | Raise, hold, lower, float |
| Control valve positions - blade tilt | Right, hold, left |
| Control valve positions - ripper lift | Raise, hold, lower |
| Hydraulic oil capacity (refill), straight tilt dozer config | 55 L |
| Hydraulic oil capacity (refill), angle tilt dozer config | 55 L |
| Hydraulic oil capacity (refill), multi-shank ripper config | 55 L |
Service refill capacities
| Coolant | 52 L |
| Fuel tank | 406 L |
| Engine oil | 38 L |
| Damper | 1.7 L |
| Transmission, bevel gear, and steering system | 48 L |
| Final drive (each side) | 27 L |
| Hydraulic system (per blade/ripper configuration, see hydraulic system group) | 55 L |
Undercarriage / final drives
| Suspension | Oscillating, with equalizer bar and forward-mounted pivot shafts (isolates final drives from blade loads) |
| Track roller frame | Monocoque, large-section, durable construction |
| Carrier rollers (each side) | 2 |
| Track rollers (each side) | 8 |
| Track shoes | Sealed and lubricated track with dust seals; track tension adjusted with grease gun; standard 510 mm single grouser shoe, optional 560/610/660 mm single grouser |
| Final drives | Double-reduction, spur gear and planetary gears; bolt-on segmented sprocket teeth for field replacement |
| Steering/brake clutches | Wet, multiple-disc, hydraulically actuated; eliminate brake-band adjustment |
Cab / ROPS options
| ROPS canopy | Meets ISO 3471 and SAE J1040 APR88 ROPS, ISO 3449 FOPS; roof 1,830 mm L x 1,600 mm W, 1,700 mm height from operator floor; add. weight 420 kg |
| ROPS canopy for cab | Meets same ROPS/FOPS standards; roof 1,270 mm L x 1,490 mm W, 1,705 mm height from operator floor; add. weight 340 kg |
| Steel cab (optional) | All-weather, enclosed, pressurized; 1,765 mm L x 1,720 mm W x 1,625 mm H, 1,515 mm floor-to-ceiling; add. weight 285 kg; hexagonal design with viscous-damper suspension mounts |
| Electronic monitoring system | Optional; microcomputer-controlled gauges and meters, wide indication range |
| Multi-shank ripper (optional) | Weight incl. hydraulic control unit 1,680 kg; beam length 2,170 mm; max digging depth 595 mm; max lift above ground 640 mm |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (w/ filter) | 44 L total, 38 L refill (11.6 US gal total, 10.0 US gal refill) | Komatsu genuine engine oil (EO), SAE 15W-40 class, for the S6D125E-2 (emission) engine fitted to this S/N range. Select grade by ambient temperature per the OMM viscosity chart; lighter grades (SAE 10W, 10W-30) apply in colder climates, heavier grades (SAE 30, 40) in hot climates. |
| Cooling system | 52-58 L (13.7-15.4 US gal) - figures vary by source/radiator configuration, treat as approximate | Komatsu Supercoolant (AF-NAC type), ethylene-glycol-based long-life coolant, premixed to protect to at least -20 C (-4 F) or per local climate; do not mix coolant types. |
| Fuel tank | 406-410 L (107-108 US gal) - minor variance between spec sources | Automotive diesel fuel equivalent to ASTM D975 No. 2-D (No.1-D blend recommended below 0 C / 32 F for cold-weather starting); low-sulfur diesel per emission-engine requirements for the S6D125E-2. |
| Transmission/powertrain (power train case - transmission and steering clutch/brake compartment, combined per OMM) | 75 L total, 50 L refill (19.8 US gal total, 13.2 US gal refill) | Komatsu genuine powertrain oil (TO), SAE 30 class as base recommendation; adjust grade (SAE 10W, 10W-30) for cold ambient per OMM chart. This model uses a steering clutch/brake arrangement rather than a separate bevel-gear steering case, so the OMM lists one combined power train case fill rather than split transmission/bevel-gear rows. |
| Final drive (each side) | 27 L (7.1 US gal) per side | Komatsu genuine gear/powertrain oil, SAE 30 class, same family as power train case oil; verify grade against OMM ambient-temperature chart. |
| Hydraulic system/tank | 95 L total, 55 L refill (25.1 US gal total, 14.5 US gal refill) | Komatsu genuine hydraulic oil (HO), SAE 10 class as base recommendation; the D85ESS-2A hydraulic tank uses a lighter engine-oil-grade fluid rather than a dedicated high-viscosity-index hydraulic fluid. Adjust viscosity by ambient temperature per OMM guidance. |
| Pivot shaft / equalizer bar | Grease-lubricated pivot point; not a sump/fill capacity in available documentation - service via grease fitting only | Molybdenum-disulfide-fortified multipurpose grease (Komatsu LM-G / G2-M equivalent) for this heavy-load pivot point, per Komatsu's standard practice for equalizer bar and pivot shaft points on this dozer class. Verify exact fitting count and interval against the OMM lubrication chart for this serial range. |
| Grease (general chassis, track, linkage) | Per-fitting service, no bulk reservoir | NLGI 2 general-purpose lithium-base grease (Komatsu G2-LI equivalent) for standard fittings; molybdenum-disulfide grease (LM-G/G2-M equivalent) for heavy-load points such as track links, equalizer bar, and pivot shaft. Komatsu's general chassis grease is rated for a wide ambient range; consult OMM for any cold-climate exceptions. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on the S6D125E-2 crankcase and on the combined power train case (transmission plus steering clutch/brake) at every scheduled drain; this model shares one oil fill for both systems rather than a split transmission/bevel-gear arrangement. Track wear metals in the final drive fill on each side separately. Because the hydraulic tank runs a lighter engine-oil-grade fluid instead of a dedicated hydraulic fluid, watch for water and silt contamination when working peat or flooded ground, and pull hydraulic samples more often than the standard filter-change interval implies.
Corrective & Common Repairs
Expect wear in the wet multiple-disc steering clutches and brakes first, since this dozer steers entirely through them via the single left-hand joystick with no separate steering case to share the load. Swamp shoes (510-660 mm single grouser) and sealed-and-lubricated track links wear unevenly in soft, abrasive peat and mud, so check link and bushing wear per side. Segmented bolt-on sprocket teeth allow field replacement without pulling the final drive. Blade lift/tilt cylinder seals and the load-sensing control valve are common leak points on machines doing heavy tilt work.
Overhaul & Rebuild Points
Major rebuild points center on the torque converter/planetary powershift unit and the paired steering clutch/brake packs, since both carry the full steering and propulsion load on this joystick-steered machine. Inframe or top-end work on the S6D125E-2 should include the turbocharger and injection pump, given the long service intervals typical of this class. Undercarriage rebuilds mean reworking the full track group - rollers, idlers, sprockets, and swamp shoes - as a set, since shoe width options up to 660 mm change track tension and roller wear patterns.
Seasonal & Environment Servicing
This model works wet, flooded, and peat ground by design, so track frames, equalizer bar pivots, and sealed track link seals need more frequent cleaning and greasing than a standard-shoe D85 doing dry construction work. Check the engine's double-element air cleaner more often in humid, high-organic-dust forestry settings, and inspect the cooling system for silt and organic buildup from swamp/logging duty. In cold climates, match engine oil, power train oil, and coolant grades to the OMM's ambient-temperature chart before extended idling or cold starts.
D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 600-311-8321 | Cartridge,Fuel Filter | Fuel system service | Check fitment → |
| 09637-30163 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 07000-02135 | O-Ring,Hydraulic Oil Filter | Hydraulic service | Check fitment → |
| 07063-01100 | Element,Hydraulic Oil Filter | Hydraulic service | Check fitment → |
| 600-211-1231 | Cartridge, Oil Filter | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine Oil Pressure warning lamp | Engine lubrication oil pressure has dropped below the safe operating threshold. | Low oil level, clogged oil filter, worn oil pump, or failed oil pressure sender/switch. | Stop engine immediately, check oil level and filter condition, verify sender wiring before restart. |
| Coolant Temperature (overheat) warning lamp | Engine coolant temperature has exceeded the normal operating range. | Low coolant level, clogged radiator core, slipping or damaged fan belt, faulty thermostat, or water temperature sender fault. | Idle engine to cool, check coolant level and radiator fins, inspect fan belt and thermostat once cooled. |
| Charge (battery/alternator) warning lamp | Charging circuit is not supplying correct voltage to the battery. | Slipping or broken alternator belt, worn alternator brushes/regulator, loose or corroded wiring connections. | Check drive belt tension, inspect alternator output and wiring, test battery condition. |
| Air cleaner clog (dust) indicator | Restriction in engine intake air cleaner has reached the service limit. | Dust-loaded double-element air cleaner or blocked dust indicator/evacuator valve. | Clean or replace air cleaner elements, reset the dust (restriction) indicator, check evacuator valve. |
| Radiator coolant level warning lamp | Engine coolant level has dropped below the minimum mark, as detected at the radiator/reserve tank level sensor. | External coolant leak, blown hose, loose radiator cap, or head gasket seepage. | Inspect for leaks, top up with correct coolant, pressure-test cooling system if level keeps dropping. |
| Torque converter oil temperature warning lamp | Power train (torque converter) oil temperature is above normal operating range. | Low power train oil level, clogged power train oil cooler, overloaded operation, or worn torque converter. | Reduce load, idle to cool, check power train oil level and cooler fins for blockage. |
| Fuel level low warning lamp | Fuel tank level has dropped to the reserve threshold. | Normal fuel consumption reaching reserve, or fuel gauge sender fault if lamp is inaccurate. | Refuel machine; if lamp state does not match tank level, check fuel level sender and wiring. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) attachments & work tools
Blades
Factory blade types for this swamp-dozer configuration are Angle (A), Straight-tilt (S) and Semi-U tilt (SU); VPAT is not documented for the D85ESS-2A. Angle blade: 3.4 m³ (4.4 yd³) capacity, 4370 x 1070 mm width x height, 25° angling, adds 2890 kg (6,370 lb) plus a 540 kg (1,190 lb) hydraulic control kit. Straight-tilt: 4.4 m³ (5.8 yd³), 3620 x 1295 mm, adds 2220 kg (4,890 lb) plus 590 kg (1,300 lb) hydraulics; Semi-U: 6.8 m³ (8.9 yd³), 3640 x 1565 mm, adds 2520 kg (5,560 lb) plus 590 kg (1,300 lb) hydraulics. S and SU share 1070 mm max lift, 590 mm max drop and 460 mm tilt adjustment; the angle blade lifts to 1255 mm, drops to 485 mm, with 400 mm tilt adjustment.
Rippers
Only a multi-shank ripper is factory-documented for the D85ESS-2A; no single-shank/giant ripper appears in Komatsu's own literature for this model. The multi-shank unit weighs 1680 kg (3,700 lb) including its hydraulic control valve, with a 2170 mm (7'1") beam, 595 mm (1'11") max digging depth and 640 mm (2'1") max lift above ground. Single-shank rippers seen in this size class are aftermarket fitments, not a Komatsu factory option for this model.
Winches
No towing winch is listed in the D85ESS-2A's factory standard or optional equipment. Winch drivetrain components (mount, case, transfer, clutch/drum/brake) are documented for the preceding D85ESS-2 (non-A) swamp dozer and shared with several D6-class Komatsu dozers, not confirmed specifically for the D85ESS-2A. If a winch-equipped 2A is encountered in the field, treat it as a non-catalog fitment and verify hydraulic drive compatibility with a dealer.
Drawbars/counterweights
Two drawbar styles are factory options: a hitch-type drawbar and a rigid-type drawbar; neither has a published individual weight or pull-capacity rating. There is no separate rear counterweight line item — the quoted operating weight of 20,670 kg (45,570 lb) already includes the angle dozer, multi-shank ripper and FRP/ROPS canopy as tested, so ballast is set through attachment choice rather than a bolt-on counterweight.
Cab/ROPS guarding
The base machine ships with ROPS mounting brackets only. The optional FRP ROPS canopy adds 420 kg (930 lb) and meets ISO 3471/SAE J1040 APR88 ROPS and ISO 3449 FOPS; a canopy-with-sweep version is separately optioned for added overhead/rear brush protection typical of forestry duty. An enclosed, pressurized steel cab adds 285 kg (630 lb), and a smaller ROPS canopy-for-cab overlay (340 kg / 750 lb) can be fitted above it. Waste/forestry-style guarding is rounded out by an optional radiator core protective grid, full-length track roller guards (vs. standard end-section guards), heavy-duty underguard and a vandalism protection cover for the instrument panel.
Hydraulic arrangement (front/rear tools)
Closed-center load-sensing (CLSS) system with one gear pump delivering 180 l/min (47.6 US gal/min) at rated rpm and a 20.6 MPa (210 kgf/cm², 2,990 psi) relief setting; all spool valves mount externally beside the hydraulic tank. Front blade control uses one spool valve for the semi-U/straight-tilt dozers (raise-hold-lower-float lift, right-hold-left tilt) or a separate spool for the angle dozer (raise-hold-lower-float lift only, no tilt function); the multi-shank ripper has its own dedicated raise-hold-lower spool. Refill capacity runs 55 l (14.5 US gal) per circuit for straight-tilt, angle-tilt and ripper hydraulics; blade-lift uses two 95 mm-bore cylinders, blade-tilt one 140 mm-bore cylinder, and ripper-lift one 140-150 mm-bore cylinder (bore varies slightly between printings of the spec sheet).
All D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) assemblies by section
Every catalogued assembly group for the Komatsu D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Accessory
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Accessory : Cap And Overall
| 09***50 | Overall,(Special Order) | 1 |
| 09***57 | Cap,(Special Order) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Accessory : Spare Parts
| 07***35 | O-Ring,Hydraulic Oil Filter | 1 |
| 07***00 | O-Ring,(For Dual Water Pump) | 1 |
| 07***54 | Element, Hydraulic Tank Filter | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Accessory : Tool
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***22 | Nozzle, Grease Pump | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Accessory : Tool (For Reversible Fan)
| 14***10 | Handle | 1 |
| 14***20 | Plate | 1 |
Cooling System
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Cooling System : Cooling (Mount And Reserve Tank)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Cooling System : Cooling (Radiator And Oil Cooler)
| 01***20 | Bolt,(For Mono Lever Steering) | 16 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Cooling System : Cooling (Radiator And Oil Cooler) (Sandy And Dusty Terrain Spec.)
| 01***20 | Bolt,(For Mono Lever Steering) | 16 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***25 | Bolt?Sems | 2 |
Electrical System
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Additional Rear Lamp(#3034-4000)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***11 | Nut - Mounting | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Additional Rear Lamp(#4001-4172)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***11 | Nut - Mounting | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Additional Rear Lamp(#4173-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Back-Up Alarm(#3034-3499)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Back-Up Alarm(#3500-)
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 04***10 | Clip,(With Accumulator) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Battery
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
| 08***15 | Battery? Wet,(Sandy And Dusty Spec.) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Battery Wiring
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Vehicle Lamp(#3034-4000)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Vehicle Lamp(#4001-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 3 |
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 7 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Vehicle Wiring(#3034-4000)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 21 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 23 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Electrical System : Vehicle Wiring(#4001-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 26 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Engine Related Parts
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Air Cleaner Cap
| 56***00 | Cap,(With Weather Cap Type) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Air Cleaner Cap (For Pre-Cleaner)(#3034-4172)
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Air Cleaner Cap (For Pre-Cleaner)(#4173-)
| 66***03 | Pre-Cleaner Assembly | 1 |
| 66***13 | Sleeve | 1 |
| 66***40 | Body | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Caution Plate (Air Cleaner)
| 09***63 | Plate? Instruction,Air Cleaner | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Caution Plate (With Turbocharger) (Air Cleaner)
| 09***63 | Plate? Instruction,(For Arabic) | 1 |
| 09***63 | Plate? Instruction,(For Persian) | 1 |
| 09***63 | Plate? Instruction,(For Indonesia) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Damper
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 20 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Engine Mount
| 01***35 | Bolt,(With Rops) | 2 |
| 01***45 | Bolt,(For 60ton Dump Body) | 10 |
| 01***80 | Capscrew (2) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Engine Mount (Able To Avail For Cab Guard)
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***65 | Bolt,(Without Rops) | 4 |
| 01***80 | Capscrew | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Engine Spare Parts
| 04***71 | V-Belt Set,(Sandy And Dusty Spec.) | 1 |
| 07***34 | O-Ring,Transmission And Steering Case | 1 |
| 60***31 | Cartridge, Oil Filter | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Engine Wiring(#3034-4000)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 10 |
| 01***32 | Washer,(With Auto Emergency Steering) | 11 |
| 08***50 | Cable | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Engine Wiring(#4001-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 10 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 11 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Exhaust Cap
| 61***70 | Cap,Exhaust | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Exhaust Pipe (Elbow Type)
| 61***60 | Pipe,Exhaust | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Exhaust Pipe (For Rops Cab And Sweep)
| 61***40 | Pipe,Exhaust | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Exhaust Pipe (Tansou Haikikan)
| 61***52 | Pipe,Exhaust | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Engine Related Parts : Water Valve
| 07***59 | Clamp,See Fig. K4010-05a0 | 4 |
| 09***00 | Valve,Hose | 1 |
| 14***40 | Plug | 2 |
Fuel Tank And Related Parts
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Additional Fuel Strainer
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Additional Fuel Strainer (For Towing Winch)(#3217-)
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Line (For Water Separator)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***10 | Bolt,(With Joy Stick Steering) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Line (For Water Separator)(#4001-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Line (Slag Handling And Water Separator)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***10 | Bolt,(With Joy Stick Steering) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Line (Slag Handling And Water Separator)(#4001-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Line (Slag Handling)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Line (Slag Handling)(#4001-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Line(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Line(#4001-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Tank (For Gauge Panel)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***80 | Screw | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Tank (For Gauge Panel)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***80 | Screw | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Tank(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***80 | Screw | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Fuel Tank And Related Parts : Fuel Tank(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***80 | Screw | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Guard
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Boot Mount (For Pre-Cleaner And Intake/Exhaust Extension)(Withoutside Cover)
| 14***70 | Boot,(D60) (D65ex) (D65p?Px) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Boot Mount (With Turbocharger) (With Rops Sweep)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Cab And Pre-Cleaner)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***08 | Nut, Accumulator Mounting | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Cab) (With Rops Sweep)(#3034-4000)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Cab) (With Rops Sweep)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Cab)(#3034-4000)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Cab)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***08 | Nut, Accumulator Mounting | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Intake/Exhaust Extension) (With Cab)(#3034-4000)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Intake/Exhaust Extension) (With Cab)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***08 | Nut, Accumulator Mounting | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Intake/Exhaust Extension) (Without Cab)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Pre-Cleaner) (With Cab) (With Rops Sweep)(#3034-4000)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Pre-Cleaner) (With Cab) (With Rops Sweep)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Pre-Cleaner) (Without Cab)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Pre-Cleaner) (Without Cab) (With Rops Sweep)(#3034-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (With Pre-Cleaner) (Without Cab) (With Rops Sweep)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (Without Cab) (With Rops Sweep)(#3034-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (Without Cab) (With Rops Sweep)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (Without Cab) (With Turbocharger) (With Raincap)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (Without Cab)(#3034-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (Without Cab)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Hood (Without Side Cover) (Without Cab)(#3148-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Side Cover (Lower)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Side Cover (Lower) (Without Side Cover)(#3148-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Side Cover (Upper)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***12 | Washer,(With Body Positioner) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Side Cover (Upper) (With Pre-Cleaner) (Without Cab)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***12 | Washer,(With Body Positioner) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Side Cover (Upper) (With Rops Sweep)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
| 01***12 | Washer,(With Body Positioner) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Engine Side Cover (Upper) (Without Side Cover)(#3148-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 14***20 | Cover,L.H | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender (Battery Cover Mount)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(With 150mm Spill Guard) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender (Bracket And Handle)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***70 | Capscrew - M24 | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender (Bracket And Handle) (Rops Canopy)(#3287-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***70 | Capscrew - M24 | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender (Bracket And Handle)(#3148-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***70 | Capscrew - M24 | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender (Bracket And Plug) (With Rops Sweep)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***70 | Capscrew - M24 | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender (Bracket Cover)
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender (Bracket Cover) (With Rops Sweep)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender (Lateral Mount) (With Cab)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***50 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Fender (Lateral Mount) (With Cab) (With Vandalism Protection)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***50 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***20 | Bolt,(For Vandalism Protection) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Front Hook
| 01***55 | Bolt,(Without Rops) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 14***20 | Hook,(With Hook) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Lift Cylinder Support : Unit_01_of_02
| 01***70 | Bolt,(With Wear Guard) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Lift Cylinder Support : Unit_02_of_02
| 01***70 | Bolt,(With Wear Guard) | 4 |
| 01***95 | Screw | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Pre-Cleaner (With Cab)(#4001-)
| 10***10 | Pre-Cleaner Ass'Y | 1 |
| 60***10 | Pre-Cleaner Ass'Y | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Radiator Mask
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***90 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Radiator Mask Single (Reinforced)
| 01***35 | Bolt, Hydraulic Tank Mounting | 2 |
| 01***55 | Bolt,(For Reinforced Type) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Rear Cover
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Rear Support And Radiator Cover (With Cab)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Rear Support And Radiator Cover (With Cab) (With Rops Sweep)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Rear Support And Radiator Cover (With Cab) (With Rops Sweep)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Rear Support And Radiator Cover (Without Cab Or With Rops Sweep)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Under Guard
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 15 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Under Guard (Hinge Type)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 15 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Guard : Under Guard (Reinforce)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 13 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Hydraulic System
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Angle Plug
| 01***40 | Bolt | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Control Valve (For Ripper)
| 72***00 | Control Valve,C&B3 | 1 |
| 72***01 | Control Valve,C&B3 | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Control Valve (Mount)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Capscrew - M14 (1)/(2) | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Control Valve (Std)
| 72***00 | Control Valve,C&B2 | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Pump (Mount)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***45 | Bolt,(For 60ton Dump Body) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Pump Line (Drain Tank)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***11 | Nut,(With Under Mirror) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Pump Line (Filter Return)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***35 | O-Ring,(F4350-61a0 -32 ) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Pump Line (Oil Cooler)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 04***12 | Clip,See Fig. K4010-41a1 | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Pump Line (P.P.C. Suction And Delivery)
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***35 | Bolt,(For Fix Position) | 8 |
| 01***23 | Washer,(For Shipping) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Pump Line (Suction And Delivery)
| 01***50 | Bolt,(Spark Arrester Spec.) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Tank And Filter (Filter)(#3034-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Tank And Filter (Filter)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Tank And Filter (Tank)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***14 | Screw | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Hydraulic Tank And Filter (Tank) (Without Handle)
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***14 | Screw | 6 |
| 01***16 | Screw | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Lift Cylinder Line (Regulator Valve)(#3034-3101)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***20 | Screw,(Not Used With Ventilator) | 2 |
| 01***55 | Bolt | 5 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Lift Cylinder Line (Regulator Valve)(#3102-)
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
| 07***34 | O-Ring (K10) | 1 |
| 14***20 | Valve Ass'Y | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Lift Cylinder Line(#3034-3101)
| 01***80 | Bolt,(Not Shown) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Lift Cylinder Line(#3102-) : Unit_01_of_02
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***35 | Bolt,(For Fix Position) | 8 |
| 01***50 | Capscrew | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Lift Cylinder Line(#3102-) : Unit_02_of_02
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***35 | Bolt,(For Fix Position) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Rear Hydraulic Line (Ripper Bracket)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 1 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Rear Hydraulic Line (Ripper Piping)
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Steering Line (P.P.C. Elbow) (For Clutch And Brake)
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
| 07***34 | O-Ring,(Not Used When (B) Spec.) | 3 |
| 07***09 | Plug,(For 2-Actuater Attachment) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Steering Line (P.P.C. Piping)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Steering Line (P.P.C. Piping) (With Accumulator)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Tilt Line (Tilt Valve Side)
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Hydraulic System : Tilt Line (Track Frame Side)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***65 | Bolt,(Used With Pin Puller) | 5 |
| 01***40 | Bolt | 2 |
Main Frame And Related Parts
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Main Frame And Related Parts : Equalizer Bar And Pivot Shaft(#3034-3216)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Main Frame And Related Parts : Equalizer Bar And Pivot Shaft(#3217-4172)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Main Frame And Related Parts : Equalizer Bar And Pivot Shaft(#4173-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***55 | Bolt,(Without Rops) | 16 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Main Frame And Related Parts : Main Frame
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Main Frame And Related Parts : Main Frame (With Rops Sweep)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Marks And Plates
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Accumulator Plates
| 09***00 | Plate? Safety,Acc.(Spanish)(Cen.Sou.America) | 1 |
| 09***00 | Plate? Safety,(English) (Lettering Type) | 1 |
| 09***7B | Plate? Safety,Acc. (Except The Americas) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Gravity Marks(#3034-4309)
| 09***01 | Plate? Mark,Keep A Safe Distance | 4 |
| 09***12 | Plate? Mark,Location Of Center Of Gravity | 2 |
| 13***10 | Plate,Slinging Position | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Gravity Marks(#4310-)
| 09***11 | Mark Plate,Hanging Point Mark | 2 |
| 09***01 | Mark,Location Of Center Of Gravity | 4 |
| 09***02 | Mark,Lift Point Mark | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Arabic)(#3034-3376)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***80 | Plate? Mark,Komatsu? Front | 1 |
| 09***00 | Plate? Mark,Komatsu? Rear (Tilt Dozer) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Arabic)(#3377-4000)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Arabic)(#4001-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Chinese)(#3034-3376)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,(Limited Supply) | 1 |
| 09***80 | Plate? Mark,Komatsu? Front | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Chinese)(#3377-4000)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,(Limited Supply) | 1 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Chinese)(#4001-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***01 | Plate | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (English) (North America) (Except U.S.A.)(#3034-3376)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
| 09***68 | Plate? Instruction,Battery? Distributor (For Usa) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (English) (North America) (Except U.S.A.)(#3377-4000)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
| 09***01 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (English) (North America) (Except U.S.A.)(#4001-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (English)(#3034-3376)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
| 09***80 | Plate? Mark,Komatsu? Front | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (English)(#3377-4000)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (English)(#4001-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (French) (Except France)(#3034-3376)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,(Limited Supply) (For France) | 1 |
| 09***80 | Plate? Mark,Komatsu? Front | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (French) (Except France)(#3377-4000)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,(Limited Supply) (For France) | 1 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (French) (Except France)(#4001-4169)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (French) (Except France)(#4170-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (German)(#3034-3376)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,(Limited Supply) | 1 |
| 09***80 | Plate? Mark,Komatsu? Front | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (German)(#3377-4000)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,(Limited Supply) | 1 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (German)(#4001-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Indonesian)(#3034-3376)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
| 09***80 | Plate? Mark,Komatsu? Front | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Indonesian)(#3377-4000)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Indonesian)(#4001-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Persian)(#4408-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Spanish) (For Central And South America)(#3377-4000)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
| 09***01 | Plate? Safety,(For South And North America) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Spanish) (For Central And South America)(#4001-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Spanish)(#3034-3376)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
| 09***80 | Plate? Mark,Komatsu? Front | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Spanish)(#3377-4000)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Marks And Plates (Spanish)(#4001-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) | 1 |
| 09***01 | Plate, Name, (Limited Supply) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Marks And Plates : Rops Plates (Except Japan)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Name,(Limited Supply) (Japanese) | 1 |
| 09***00 | Plate? Name,(Limited Supply) (Arabic) | 1 |
Miscellaneous
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Miscellaneous : Dozer Lock
| 13***10 | Wire | 1 |
| 13***20 | Wire | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Miscellaneous : Dozer Lock (For Angle)
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 4 |
| 14***10 | Wire Rope | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Miscellaneous : Intake And Exhaust Extension
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***45 | Screw | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Miscellaneous : Vandalism Protection (Filler)
| 09***08 | Cap,(For Ripper Or Rear Hydraulic. Take) | 2 |
| 14***11 | Cover | 1 |
| 20***20 | Lock Ass'Y,(Sandy And Dusty Terrain S.) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Miscellaneous : Vandalism Protection (Panel)
| 01***06 | Screw | 8 |
| 01***25 | Bolt | 2 |
| 01***30 | Bolt,R.H | 2 |
Operator'S Compartment And Control System
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner (Compressor Mount)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 1 |
| 01***90 | Bolt,With Cover | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner (Compressor)(#3034-4000)
| ND***70 | Clamp, Tapping | 1 |
| ND***40 | Compressor Assembly | 1 |
| ND***00 | Washer? 0.3mm,Plate? Sk | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner (Compressor)(#4001-4445)
| 42***10 | Compressor | 1 |
| ND***70 | Clamp, Tapping | 1 |
| ND***40 | Compressor Assembly | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner (Compressor)(#4446-)
| 14***80 | Compressor Ass'Y | 1 |
| ND***70 | Clamp, Tapping | 1 |
| ND***60 | Cover,Dust | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner (Condenser Mount)
| 01***25 | Capscrew | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner (Condenser)(#3034-4000)
| 12***10 | Holder | 1 |
| 14***02 | Condenser Ass'Y | 1 |
| 14***20 | Hose | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner (Condenser)(#4001-)
| 08***09 | Conduit | 1 |
| 08***12 | Conduit | 1 |
| 08***03 | Conduit | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner (Filter Ass'Y) (For Air-Con? Heater)
| 09***03 | Hose,Air | 1 |
| 14***70 | Clamp | 2 |
| 14***50 | Filter,95 | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner (Heater Line)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***11 | Clip,See Fig. K4010-04a0 | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner Unit (Evaporator And Radiator)(#3034-4000)
| 14***10 | Insulator | 1 |
| 14***02 | Air Conditioner Unit | 1 |
| 19***40 | Clamp | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner Unit (Thermostat And Drain Hose)(#3034-4000)
| ND***01 | Screw,With Washer | 2 |
| ND***11 | Bracket | 1 |
| ND***10 | Clamp | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Air Conditioner Unit(#4001-)
| 08***10 | Tie, Cable | 1 |
| 17***00 | Unit Ass'Y,(See Fig. K2210-11b5) | 1 |
| 17***01 | Unit Ass'Y,(See Fig. K2210-11b5) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Arm Rest Cover (Lower) (Rear Att.)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***14 | Bolt,(Without Cab) | 8 |
| 01***20 | Bolt | 32 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Arm Rest Cover (Lower)(#3034-4000)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***20 | Bolt | 32 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Arm Rest Cover (Lower)(#4001-)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***14 | Bolt,(Without Cab) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Arm Rest Cover (Upper)(#3034-4000)
| 01***12 | Bolt - M8 - 1.25 X 12 | 14 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***14 | Bolt,(Without Cab) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Arm Rest Cover (Upper)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***16 | Screw | 10 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Accessory)(#3034-4000)
| 01***16 | Screw | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 2 |
| 08***00 | Lighter, Cigar - 24 V | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Accessory)(#4001-)
| 01***16 | Screw | 2 |
| 01***16 | Screw | 2 |
| 01***16 | Bolt, Mount Solenoid Valve | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Am Radio)(#3034-4000)
| 01***10 | Screw | 4 |
| 01***16 | Screw | 4 |
| 08***00 | Antenna | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Am-Fm Cassette Stereo)(#3034-4000)
| 01***10 | Screw | 4 |
| 01***16 | Screw | 4 |
| 08***00 | Antenna | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Body)(#3034-4000)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***16 | Bolt | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Body)(#4001-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***16 | Bolt | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Door And Door Lock)(#3034-4000)
| 01***35 | Bolt | 8 |
| 01***12 | Screw | 4 |
| 01***16 | Screw,(With Payload Meter) | 14 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Door And Door Lock)(#4001-)
| 01***35 | Bolt | 8 |
| 01***20 | Screw,(See Fig. K0210-17a0) | 10 |
| 01***12 | Screw | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Door Open Lock)(#3034-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***20 | Bolt | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Door Open Lock)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***20 | Bolt | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Front Work Lamp)(#3034-4000)
| 01***11 | Nut - Mounting | 1 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 1 |
| 08***14 | Clip, Harness | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Front Work Lamp)(#4001-)
| 01***11 | Nut - Mounting | 1 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 1 |
| 08***14 | Clip, Harness | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Mount Bolt And Seal)(#3034-4000)
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Mount Bolt And Seal)(#4001-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 17 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Radio Less)(#3034-4000)
| 01***16 | Screw | 4 |
| 08***00 | Antenna | 1 |
| 08***00 | Cable - Antenna | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Radio Mount Bracket) (With Am Radio)(#4001-)
| 01***10 | Screw | 1 |
| 01***16 | Screw | 4 |
| 08***00 | Antenna | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Radio Mount Bracket) (Without Radio)(#4001-)
| 01***16 | Screw | 4 |
| 08***00 | Antenna | 1 |
| 08***00 | Cable - Antenna | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Rear Work Lamp)(#3034-4000)
| 01***11 | Nut - Mounting | 1 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 1 |
| 08***14 | Clip, Harness | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Rear Work Lamp)(#4001-)
| 01***11 | Nut - Mounting | 1 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 1 |
| 08***14 | Clip, Harness | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Roof Absorber And Garnish)(#4001-)
| 01***20 | Bolt,(Forwarded Individually Parts) | 2 |
| 01***12 | Bolt | 4 |
| 01***20 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Roof Lining And Garnish) (With Am-Fm Cassette Stereo)(#3034-4000)
| 01***12 | Bolt | 4 |
| 14***70 | Screw,Tapping | 8 |
| 14***31 | Cover,L.H | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Roof Lining And Garnish)(#3034-4000)
| 01***12 | Bolt | 4 |
| 14***70 | Screw,Tapping | 8 |
| 14***31 | Cover,L.H | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Roof Lining) (With Am Radio)(#4001-)
| 14***31 | Lining,Roof | 1 |
| (1***0) | Cab Ass'Y,(Am Radio) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Roof Lining) (Without Radio)(#4001-)
| 14***31 | Lining,Roof | 1 |
| 14***20 | Cover,(Without Radio) | 1 |
| (1***0) | Cab Ass'Y,(Radio Less? F.R. Work Lamp) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Room Lamp And Wiring)(#3034-4000)
| 01***20 | Screw | 2 |
| 01***20 | Screw | 5 |
| 01***16 | Screw | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Room Lamp And Wiring)(#4001-)
| 01***20 | Screw | 2 |
| 01***20 | Screw | 5 |
| 01***16 | Screw | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Sash And Grip)(#3034-4000)
| 01***20 | Screw, Filter Mounting | 8 |
| 01***16 | Bolt,(With Pre Cleaner) | 4 |
| 04***12 | Pin,Spring (See Fig.0201) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Sash And Grip)(#4001-)
| 01***20 | Screw, Filter Mounting | 8 |
| 01***16 | Screw | 4 |
| 01***16 | Bolt,(With Pre Cleaner) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Stereo Speaker For Cassette Stereo)(#3034-4000)
| 01***25 | Screw | 8 |
| 08***00 | Speaker | 2 |
| 14***20 | Panel,Speaker | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Wiper)(#3034-4000)
| 01***12 | Capscrew | 2 |
| 01***08 | Screw,(Except Japan) | 8 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cab (Wiper)(#4001-)
| 01***12 | Capscrew | 2 |
| 01***08 | Screw,(Except Japan) | 8 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Canopy
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***60 | Capscrew | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Canopy (Vandalism Protection)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***60 | Capscrew | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cup Holder (Without Cab)(#4001-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***16 | Bolt | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Cup Holder(#4001-)
| 14***80 | Bracket | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Accesory) (For Air Conditioner And Heater)(#4001-)
| 01***12 | Bolt - Front Cover Mounting | 1 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***60 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Air Conditioner Box)(#4001-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Air Conditioner Kit)(#4001-)
| 13***90 | Hose? 1550mm | 2 |
| 14***20 | Damper | 1 |
| 14***31 | Duct | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Air Conditioner)(#3034-4000)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Duct And Cover)(#3034-4000)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 26 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 12 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Filter Cover) (For Air Conditioner And Heater)(#4001-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 26 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 12 |
| 01***30 | Bolt - M8 X 30lg | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner And Heater)(#4001-)
| 13***11 | Dashboard Ass'Y | 1 |
| 14***10 | Air Duct Ass'Y | 1 |
| 14***20 | Duct,Center | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Heater Box)(#4001-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***20 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Heater Kit)(#4001-)
| 14***11 | Duct | 1 |
| 14***20 | Damper | 1 |
| 14***31 | Duct | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Heater)(#3034-4000)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 3 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***20 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Monitor Panel)
| 78***10 | Bulb - 1.4 Watt | 5 |
| 78***00 | Panel Ass'Y,Panel | 1 |
| 78***00 | Plate | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Mount) (For Air Conditioner And Heater)(#4001-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***85 | Bolt,(Used With Pin Puller) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Mounting)(#3034-4000)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***85 | Bolt,(Used With Pin Puller) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Panel And Wiring)(#3034-4000)
| 01***12 | Bolt - Front Cover Mounting | 1 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***60 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Without Cab) (With Gauge Panel)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 9 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Without Cab)(#3034-4000)
| 01***12 | Bolt - Front Cover Mounting | 1 |
| 01***16 | Bolt - Box Mounting | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 9 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dash Board (Without Cab)(#4001-)
| 01***12 | Bolt - Front Cover Mounting | 1 |
| 01***16 | Bolt - Box Mounting | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 9 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Dashboard (Panel Board) (For Air Conditioner And Heater)(#4001-)
| 01***10 | Screw,(With Air Conditioner) | 7 |
| 01***14 | Bolt,(Without Cab) | 23 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 7 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor (Brake Pedal)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 1 |
| 01***25 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor (Decele Pedal And Cable)
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***30 | Bolt,Stopper | 1 |
| 01***25 | Bolt | 21 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Blade Control)(#3034-4000)
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***12 | Screw,(For Fixed Type Ripper) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Blade Control)(#4001-)
| 01***30 | Bolt - M8 X 30lg | 6 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***12 | Screw,(For Fixed Type Ripper) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Blade Lock)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Blade P.P.C. Valve Mount)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| (7***1) | Pilot Valve | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Blade Piping) (For Angle)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Blade Piping) (For Angle)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Blade Piping)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Blade Piping)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***18 | O-Ring,(See Fig.1601-29?1602-17) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Electrical Equipment)(#3034-4000)
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Electrical Equipment)(#4001-)
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Frame And Mount) (With Cab)(#3034-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***00 | Capscrew | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Frame And Mount) (With Cab)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt,(With Rops) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Frame And Mount) (Without Cab)(#3034-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***80 | Screw | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Frame And Mount) (Without Cab)(#4001-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt,(With Rops) | 8 |
| 01***35 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Fuel Control)(#3034-4000)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***80 | Screw | 4 |
| 01***25 | Bolt,See Fig. K4010-65a0 | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Handle) (Without Cab)(#3034-4000)
| 01***25 | Bolt | 4 |
| 14***70 | Handle | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Knob)(#4001-)
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Pilot Valve)(#4001-)
| 07***23 | O-Ring,Plug | 4 |
| 07***23 | O-Ring - (K6) | 1 |
| 07***34 | O-Ring (K32) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Speed Control) (1/2)(#3034-4000)
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***05 | Nut,L.H. Thread (D31s) | 1 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Speed Control) (1/2)(#4001-)
| 01***30 | Bolt - M8 X 30lg | 3 |
| 01***45 | Bolt, Mounting Cranking Motor | 1 |
| 01***05 | Nut,L.H. Thread (D31s) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Speed Control) (2/2)(#3034-4000)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 1 |
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Speed Control) (2/2)(#4001-)
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***35 | Bolt,(For Fix Position) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Steering Control Mount)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(With Body Positioner) | 5 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Steering Control Mount)(#4001-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt - M8 X 30lg | 5 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Steering Shaft)(#3034-4000)
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***45 | Bolt, Mounting Cranking Motor | 1 |
| 01***07 | Nut,L.H. Thread (D31s) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Transmission Lock)(#3034-4001)
| 01***30 | Bolt - M8 X 30lg | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Transmission Lock)(#4001-)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***05 | Nut,L.H. (For Trimming Dozer) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Window Washer Hose)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***12 | Clip | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Wiring)(#3034-4000)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 16 |
| 01***20 | Bolt,(For Mono Lever Steering) | 7 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Frame (Wiring)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 15 |
| 01***20 | Bolt,(For Mono Lever Steering) | 11 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Floor Mat (With Cab)
| 14***21 | Mat,(D65e?P?Ex?Px) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Hand Rail (With Cab)(#3102-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(For Vandalism Protection) | 2 |
| 01***25 | Bolt,D65px | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Hand Rail (With Cab)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,D65px | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Hand Rail (Without Cab)(#3102-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(For Vandalism Protection) | 2 |
| 01***25 | Bolt | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Hand Rail (Without Cab)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,D65px | 2 |
| 01***25 | Bolt | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Heater Blower (For Air Conditioner And Heater)(#3034-4000)
| 14***01 | Blower Ass'Y | 1 |
| 17***20 | Pipe | 1 |
| 17***70 | Fan | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Heater Unit(#3034-4000)
| 14***00 | Heater Unit Ass'Y | 1 |
| 19***40 | Clamp | 1 |
| ND***40 | Hose | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Non Slip Sheet (Without Cab)
| 14***40 | Sheet | 1 |
| 14***50 | Sheet | 1 |
| 14***60 | Sheet | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type) (Fabric Seat) (Hiback)(#4001-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type) (Fabric Seat) (With Head Rest)(#4001-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type) (Fabric Seat)(#4001-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type) (Leather Seat) (Hiback)(#4001-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type)(#3034-4000)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 12 |
| 01***10 | Nut, Plate Mounting | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type)(#4001-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Rigid Type)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type) (Cloth Type)(#3034-4000)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 9 |
| 01***06 | Nut | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type) (Cloth Type)(#4001-)
| 01***30 | Screw | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 11 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type) (Fabric Seat) (With Head Rest)(#4001-)
| 01***30 | Screw | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 11 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type) (Mount)(#4001-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 13***11 | Cover | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type)(#3034-4000)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 9 |
| 01***06 | Nut | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type)(#4001-)
| 01***30 | Screw | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 11 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Protection Seat(#4001-)
| 13***90 | Plate,Protection Film | 1 |
| 13***90 | Plate,Protection Film | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rear Work Equipment Control (Control) (Towing Winch)
| 01***30 | Bolt - M8 X 30lg | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rear Work Equipment Control (Piping) (Ripper)
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***35 | Bolt,(For Fix Position) | 2 |
| 01***45 | Screw | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rear Work Equipment Control (Towing Winch)
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rigid Mount (Without Cab)(#3034-4000)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 4 |
| 01***60 | Capscrew | 8 |
| 01***05 | Screw | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Room Mirror
| 01***20 | Bolt,(Forwarded Individually Parts) | 2 |
| 14***31 | Bracket | 1 |
| 14***40 | Mirror | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops (With Cab)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***70 | Capscrew - M24 | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops (With Cab) (Vandalism Protection)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***70 | Capscrew - M24 | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops (Without Cab)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 18 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops (Without Cab) (Vandalism Protection)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 18 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Cover)
| 01***40 | Bolt,(With Center Guard) | 5 |
| 01***35 | Bolt,(With Rops) | 2 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 39 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Front Guard) (With Cab)(#3034-3329)
| 01***30 | Bolt - Pin Mounting | 2 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***35 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Front Guard) (With Cab)(#3330-)
| 01***30 | Bolt - Pin Mounting | 2 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***40 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Front Guard) (Without Cab)(#3034-3329)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 8 |
| 01***45 | Bolt,(For L=529mm Pin) | 4 |
| 01***19 | Nut - M24 | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Front Guard) (Without Cab)(#3330-)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 8 |
| 01***40 | Bolt | 2 |
| 01***50 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Guard And Roof)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 18 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Rear Guard)(#3034-3037)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 8 |
| 01***40 | Bolt,(With Service Valve R.H.) | 12 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Rear Guard)(#3038-3329)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 12 |
| 01***45 | Bolt,(For L=529mm Pin) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Rear Guard)(#3330-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 12 |
| 01***50 | Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Roof Guard And Sweep)(#3034-3329)
| 01***40 | Bolt,For Weight Adjusting Bolt | 8 |
| 01***75 | Bolt - Tube Mounting | 8 |
| 01***75 | Capscrew | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Roof Guard And Sweep)(#3330-)
| 01***40 | Bolt,For Weight Adjusting Bolt | 8 |
| 01***75 | Capscrew | 6 |
| 01***80 | Screw | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Wiring)(#3034-3329)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 19 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Rops Sweep (Wiring)(#3330-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Seat Belt (For Rigid Seat)
| 09***01 | Bolt,(For Shipping) | 2 |
| 09***02 | Washer,(For Shipping) | 2 |
| 09***03 | Nut,(For Shipping) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Seat Belt (For Suspension Seat)
| 09***01 | Bolt,(For Shipping) | 4 |
| 09***02 | Washer,(For Shipping) | 4 |
| 09***03 | Nut,(For Shipping) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Seat Belt (Retraction)(#4001-)
| 02***44 | Bolt | 2 |
| 09***01 | Bolt,(For Shipping) | 2 |
| 09***02 | Washer,(For Shipping) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Seat Frame (Except Japan)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 14***13 | Bracket | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Sunvisor
| 14***71 | Film? Sunshade | 1 |
| 14***81 | Film? Sunshade | 2 |
| 14***91 | Clip | 18 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Suspension(#3034-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
| 01***45 | Bolt,(For 60ton Dump Body) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Suspension(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
| 01***60 | Capscrew | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Operator'S Compartment And Control System : Window Washer Tank
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
Power Train And Final Drive
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Bevel Gear And Shaft)(#3034-4000)
| 01***55 | Bolt | 8 |
| 01***13 | Nut,(See Fig.337) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Bevel Gear And Shaft)(#4001-)
| 01***10 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***50 | Bolt,Reamer | 10 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Case)(#3034-4000)
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 32 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 40 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Case)(#4001-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 32 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 36 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Clutch And Brake) (1/2)(#3034-4000)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 04***30 | Ring, Retaining | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Clutch And Brake) (1/2)(#4001-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 12 |
| 04***25 | Ring, Snap (2) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Clutch And Brake) (2/2)(#3034-4000)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 30 |
| 01***05 | Capscrew | 6 |
| 01***45 | Screw | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Clutch And Brake) (2/2)(#4001-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 18 |
| 01***05 | Capscrew | 6 |
| 01***50 | Bolt | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Control)(#3034-4000)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Control)(#4001-)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Pump Related Parts)(#3034-4000)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Pump Related Parts)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Pump)(#3034-4000)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***40 | Screw, Hex Socket | 6 |
| 01***50 | Capscrew | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Pump)(#4001-)
| 01***40 | Screw, Hex Socket | 6 |
| 01***50 | Capscrew | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Steering Cover) (1/2)(#3034-4000)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 14 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 15 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Steering Cover) (1/2)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***40 | Bolt (Op) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Steering Cover) (2/2)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Steering Cover) (2/2)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 9 |
| 01***60 | Capscrew | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Steering Pilot Piping)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***95 | Capscrew | 2 |
| 01***70 | Bolt,(With Wear Guard) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Steering Support)(#3034-4000)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 07***65 | O-Ring,(F4320-55a0 -12 ) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Steering Support)(#4001-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 07***65 | O-Ring,(F4320-55a0 -12 ) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Torque Shaft)(#3034-4000)
| 14***21 | Shaft | 2 |
| 14***60 | Button | 2 |
| 14***71 | Shaft | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Torque Shaft)(#4001-)
| 14***70 | Shaft | 2 |
| 14***60 | Button | 2 |
| 14***20 | Shaft | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Valve) (1/3)(#3034-4000)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***34 | O-Ring,(F2320-62a0 -7 ) | 5 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Valve) (1/3)(#4001-)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Valve) (2/3)(#3034-4000)
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***90 | Capscrew | 4 |
| 01***05 | Capscrew | 9 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Valve) (2/3)(#4001-)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 2 |
| 01***85 | Bolt, Divider Valve Mounting | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Valve) (3/3)(#3034-4000)
| 01***70 | Screw | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 07***34 | O-Ring,(F2320-62a0 -7 ) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Clutch And Brake (Valve) (3/3)(#4001-)
| 01***70 | Screw | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 07***34 | O-Ring,(F2320-62a0 -7 ) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Final Drive (Carrier)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 9 |
| 01***45 | Bolt,(For 60ton Dump Body) | 30 |
| 01***55 | Bolt,(Without Rops) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Final Drive (Mount)
| 01***55 | Bolt,(Without Rops) | 18 |
| 01***70 | Bolt | 22 |
| 01***60 | Flat Washer - M20 (Hardened) | 40 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Final Drive (Pinion)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***45 | Bolt, Mounting Cranking Motor | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 9 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Final Drive (Sprocket And Hub)
| 01***45 | Bolt,(For 60ton Dump Body) | 28 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 28 |
| 01***28 | Nut (Std) | 27 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Power Line (Concentrated Piping)(#3034-4000)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Power Line (Concentrated Piping)(#4001-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Power Line (Cooler Oil Line)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 1 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Power Line Mount (Rigid Type)
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***80 | Capscrew | 4 |
| 01***30 | Bolt | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Power Line Mount(#3034-3101)
| 01***30 | Bolt | 4 |
| 01***80 | Capscrew (2) | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Power Line Mount(#3102-)
| 01***35 | Bolt,(With Rops) | 2 |
| 01***45 | Bolt,(For 60ton Dump Body) | 8 |
| 01***30 | Bolt | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Power Line Pump (1/2)
| 04***18 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y,(Sal(2)45) | 1 |
| 70***30 | Coupling Assembly | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Power Line Pump (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***38 | Ring, Seal - Between Sections | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Torque Converter (Bare)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 36 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 14 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Torque Converter (Case)
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Torque Converter (Filtration And Support)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 11 |
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 13 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Torque Converter (Power Take Off)
| 01***60 | Capscrew | 1 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 23 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 23 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Torque Converter (Scavenging Pump)
| 04***15 | Ring,Back-Up | 1 |
| 04***25 | Ring, Snap | 1 |
| 06***07 | Bearing,Ball | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (1st Housing)(#3034-4000)
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 4 |
| 07***20 | O-Ring,(F4350-58a1a-6 ) | 1 |
| 07***15 | Plug, (Without Air Conditioner Or Heater) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (1st Housing)(#4001-)
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 4 |
| 07***15 | Plug, (Without Air Conditioner Or Heater) | 1 |
| 10***20 | Pin, Seal - Forward Clutch | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (2nd? 3rd? Foward And Reverse Housing)(#3034-4000)
| 01***60 | Screw | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (2nd? 3rd? Foward And Reverse Housing)(#4001-)
| 01***60 | Bolt | 4 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 6 |
| 04***30 | Ring, Retaining | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Carrier) (1/2)(#3034-4000)
| 04***20 | Ring, Retaining | 4 |
| 04***20 | Ring, Retaining | 1 |
| 04***10 | Ring, Snap | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Carrier) (1/2)(#4001-)
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
| 04***18 | Ring,Snap (Without R.P.C.U.) | 5 |
| 04***19 | Ring | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Carrier) (2/2)(#3034-4000)
| 04***20 | Pin, Spring | 3 |
| 04***25 | Ring, Snap | 1 |
| 04***35 | Bowl, Check Valve | 7 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Carrier) (2/2)(#4001-)
| 04***12 | Ring, Snap (4) | 1 |
| 04***20 | Ring, Retaining | 1 |
| 04***35 | Bowl, Check Valve | 7 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Case)(#3034-4000)
| 01***40 | Capscrew | 4 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Case)(#4001-)
| 01***40 | Bolt (Op) | 4 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Cover) (1/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Screw | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Cover) (2/2)(#3034-4000)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 13 |
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Cover) (2/2)(#4001-)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Input And Output Shaft)(#3034-4000)
| 01***50 | Bolt,(Not Used When With Cab) | 4 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 4 |
| 04***25 | Ring, Snap (2) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Input And Output Shaft)(#4001-)
| 07***52 | Ring, Seal | 1 |
| 14***10 | Shaft | 1 |
| 14***21 | Shaft | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Lubrication Oil Inlet)(#3034-4000)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***42 | O-Ring - Torque Converter Totransmission | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Lubrication Oil Inlet)(#4001-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 07***42 | O-Ring - Torque Converter Totransmission | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Main Valve)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 07***30 | O-Ring,Transmission Case Mount | 5 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Modulating Valve)(#3034-3348)
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Modulating Valve)(#3349-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***10 | Bolt,(With Joy Stick Steering) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Quick Return Valve)(#3034-3348)
| 01***55 | Bolt,(See Service News) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 04***12 | Ring, Snap | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Quick Return Valve)(#3349-4000)
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 1 |
| 13***60 | Plug | 1 |
| 14***03 | Control Valve Ass'Y | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission (Quick Return Valve)(#4001-)
| 04***10 | Ring, Snap | 1 |
| 07***34 | O-Ring, O-Ring, Oil Level And Fill Plug | 1 |
| 13***61 | Plug | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Transmission Mount
| 01***50 | Capscrew | 13 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 13 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 13 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Travel Control (Brake And Steering Rod)
| 01***10 | Nut,(Fig.F2820-01a3-12) | 2 |
| 01***11 | Nut - Mounting | 2 |
| 01***10 | Nut | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Travel Control (Fuel Bracket)
| 01***05 | Nut,L.H. (For Trimming Dozer) | 1 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 1 |
| 01***09 | Nut,(With Body Positioner) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Travel Control (Fuel Cable) (Decele)(#3034-4000)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***04 | Nut,(For Air Conditioner Less) | 1 |
| 01***08 | Nut,(For Russian) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Travel Control (Fuel Cable) (Decele)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***08 | Nut,(For Russian) | 2 |
| 01***10 | Washer,(For 35a Alternator) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Travel Control (Fuel Clutch)(#4001-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Screw | 2 |
| 01***03 | Nut, L. H. Thread | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Travel Control (Lever And Cable)(#3034-4000)
| 01***40 | Bolt (Op) | 1 |
| 01***14 | Bolt,(Without Cab) | 4 |
| 01***03 | Nut, L. H. Thread | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Travel Control (Lever And Cable)(#4001-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***09 | Nut,(B) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Universal Joint(#3034-4556)
| 01***55 | Bolt - Mount Cage To Transmission Case | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 13***81 | Fitting,Grease | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Power Train And Final Drive : Universal Joint(#4557-)
| 01***65 | Bolt,(Used With Pin Puller) | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 14***00 | Propeller Shaft | 1 |
Service Kit And Component Parts
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (2-Spool) (1/4)
| 01***65 | Hexagon Bolt | 3 |
| 01***75 | Bolt (M10-1.50x75) | 1 |
| 01***95 | Capscrew | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (2-Spool) (2/4)
| 07***18 | O-Ring, Divider Valve Mounting | 2 |
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 1 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (2-Spool) (3/4)
| 70***90 | O-Ring,Suction | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 1 |
| (7***0) | Control Valve | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (2-Spool) (4/4)
| 07***05 | O-Ring (K1) | 2 |
| 07***05 | Ring,Back-Up | 2 |
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (3-Spool) (1/6)
| 01***85 | Screw | 3 |
| 01***75 | Bolt (M10-1.50x75) | 1 |
| 01***95 | Capscrew | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (3-Spool) (2/6)
| 07***05 | O-Ring (K1) | 1 |
| 07***18 | O-Ring, Divider Valve Mounting | 2 |
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (3-Spool) (3/6)
| 70***90 | O-Ring,Suction | 1 |
| 72***00 | Valve Ass'Y,Suction And Safety | 1 |
| (7***0) | Control Valve | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (3-Spool) (4/6)
| 07***05 | O-Ring (K1) | 2 |
| 07***05 | Ring,Back-Up | 2 |
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (3-Spool) (5/6)
| 01***75 | Bolt (M10-1.50x75) | 1 |
| 01***20 | Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Control Valve (3-Spool) (6/6)
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 70***00 | Valve Ass'Y,(250kg/Cm2) Suction And Safety | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Hydraulic Pump
| 01***45 | Washer, Spring | 4 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 4 |
| 04***20 | Ring, Retaining | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Hydraulic Pump (P.P.C. Pump)
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 04***20 | Pin,Dowel (Welded) | 4 |
| 04***15 | Ring, Snap | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Hydraulic Pump (Power Line) (1/2)(#4001-4172)
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 04***24 | Pin,Dowel (For No.3 Housing) | 4 |
| 04***18 | Ring, Retaining | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Hydraulic Pump (Power Line) (1/2)(#4173-)
| 04***18 | Ring, Retaining | 1 |
| 70***50 | Pump Ass'Y,(Sar(2)50) | 1 |
| 70***30 | Coupling Assembly | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Hydraulic Pump (Power Line) (2/2)(#4001-4172)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Hydraulic Pump (Power Line) (2/2)(#4173-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt | 4 |
| 01***00 | Bolt | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Lift Cylinder
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***00 | Bolt - Cover Mounting | 4 |
| 01***11 | Nut,(With Under Mirror) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Ppc Valve (For Blade Control)(#3034-3342)
| 01***70 | Bolt | 4 |
| 07***20 | O-Ring,Relief Valve | 1 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Ppc Valve (For Blade Control)(#3343-)
| 01***70 | Bolt | 4 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
| 07***20 | O-Ring,(0202-007) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Ppc Valve (For Ripper Control)
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 70***30 | Ppc Valve, Assembly | 1 |
| 70***40 | Shim - 0.012 In. (0.30 mm) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Service Kit
| 07***15 | O-Ring,(Without Boom Kickout) | 1 |
| 07***20 | O-Ring,(F4350-58a1a-6 ) | 2 |
| 07***70 | O-Ring,(For Pc1800e-6)(See Fig.A2041) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Service Valve (For Ripper) (1/2)
| 01***85 | Screw | 3 |
| 01***75 | Bolt (M10-1.50x75) | 1 |
| 01***20 | Bolt | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Service Valve (For Ripper) (2/2)
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
| 70***90 | O-Ring,Suction | 2 |
| 70***00 | Valve Ass'Y,(250kg/Cm2) Suction And Safety | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Shoe Bolt And Nut Service Kit(#4201-)
| 14***00 | Shoe Bolt And Nut K | 1 |
| 14***10 | Bolt? Shoe (Y0320-K1) | 30 |
| 14***20 | Nut? Shoe (Y0320-K2) | 30 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Steering Line (Relief Valve)
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Tilt Or Pitch Cylinder(#3034-4179)
| 01***55 | Bolt,(For Shipping) | 12 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 12 |
| 07***35 | O-Ring,Cylinder Head | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Tilt Or Pitch Cylinder(#4180-4190)
| 01***55 | Bolt,(For Shipping) | 12 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 12 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Tilt Or Pitch Cylinder(#4191-)
| 01***55 | Bolt,(For Shipping) | 12 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 12 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Service Kit And Component Parts : Track Link (Lubricate Type) (For Single Grouser) (Supply Parts)(#4201-)
| 07***30 | Plug,(Large) | 84 |
| 07***21 | Plug,(Small) | 84 |
| 14***51 | Pin | 84 |
Under Carriage
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Carrier Roller
| 01***30 | Bolt - Pin Mounting | 4 |
| 01***85 | Bolt (Kit) | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Front Idler
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 16 |
| 01***13 | Nut,(See Fig.337) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 18 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Idler Cushion
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Roller Guard
| 01***45 | Bolt | 8 |
| 01***45 | Washer,(Without R.O.P.S.) | 8 |
| 14***43 | Guard | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Track Frame
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt (Op) | 20 |
| 01***65 | Bolt (D65p) | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Track Roller
| 01***65 | Bolt,(For Shipping) | 64 |
| 01***45 | Washer,(Without R.O.P.S.) | 64 |
| 07***17 | Plug | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (510mm Wide)(#4201-)
| 07***30 | Plug,(Large) | 84 |
| 07***21 | Plug,(Small) | 84 |
| 14***51 | Pin | 84 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (560mm Wide)(#4201-)
| 07***30 | Plug,(Large) | 84 |
| 07***21 | Plug,(Small) | 84 |
| 14***51 | Pin | 84 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (610mm Wide)(#4201-)
| 07***30 | Plug,(Large) | 84 |
| 07***21 | Plug,(Small) | 84 |
| 14***51 | Pin | 84 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser)(#3034-4200)
| 07***30 | Plug,(Large) | 84 |
| 07***21 | Plug,(Small) | 84 |
| 14***51 | Pin | 84 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Under Carriage : Track Shoe (Master Pin Type) (Single Grouser)
| 14***40 | Seal,Dust? Regular? W-Type | 160 |
| 14***00 | Track Link Ass'Y | 1 |
| 14***00 | Track Shoe Ass'Y | 1 |
Work Equipment
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Angle Blade
| 02***70 | Bolt, Plow | 36 |
| 02***19 | Nut | 36 |
| 04***80 | Pin,Cotter | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Angle Frame
| 01***65 | Bolt,(Without Rops) | 16 |
| 01***65 | Bolt,L.H. (Kit) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 16 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Arm And Brace (Angle Dozer)
| 01***95 | Bolt | 4 |
| 01***20 | Bolt - M14 X 20lg | 6 |
| 01***80 | Bolt | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Arm And Brace (Tilt Dozer)
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
| 01***75 | Capscrew | 16 |
| 01***25 | Bolt | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Arm And Brace (Tilt Dozer)(Nonadjust Type)
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
| 01***75 | Capscrew | 16 |
| 01***25 | Bolt | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Drawbar
| 01***65 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***65 | Bolt | 1 |
| 01***15 | Nut,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Drawbar (Rigid Type)
| 01***75 | Bolt | 6 |
| 01***60 | Bolt (Itl) | 1 |
| 01***19 | Nut | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Drawbar (Rigid Type) (For Scraper)
| 01***75 | Bolt | 2 |
| 01***90 | Bolt (Itl) | 4 |
| 01***60 | Bolt (Itl) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Fair Lead
| 01***35 | Capscrew - M14 (1)/(2) | 8 |
| 01***60 | Capscrew | 4 |
| 01***70 | Capscrew - M24 | 6 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Lift Cylinder (Cylinder Fixing Parts)
| 01***50 | Bolt | 2 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
| 01***15 | Nut | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Rear P.T.O. Shaft (Towing Winch)
| 01***50 | Bolt,(Spark Arrester Spec.) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Ripper (Riged Type)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***80 | Bolt | 10 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Ripper Cylinder Plug
| 07***28 | Nut,(Without Tilt Cylinder) | 2 |
| 07***16 | Plug,(Without Tilt Cylinder) | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Straight Blade
| 01***35 | Bolt,(With Rops) | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
| 02***70 | Bolt, Plow | 30 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Straight Blade (Semi-U)
| 01***35 | Bolt,(With Rops) | 4 |
| 01***45 | Washer | 14 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Straight Frame
| 01***40 | Bolt,For Weight Adjusting Bolt | 8 |
| 01***65 | Bolt,(Without Rops) | 16 |
| 01***65 | Bolt,L.H. (Kit) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Tilt Dozer Line(#3034-3600)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 26 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
| 01***30 | Bolt - Pin Mounting | 8 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Tilt Dozer Line(#3601-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 18 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
| 01***30 | Bolt - Pin Mounting | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Brake)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 11 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 12 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 10 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Case)
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 10 |
| 01***45 | Bolt, Mounting Cranking Motor | 11 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Clutch)
| 07***35 | O-Ring,Cage? Transfer Gear | 2 |
| 07***90 | O-Ring,(F4320-55a0 -5 ) | 2 |
| 07***08 | Plug,(Without Lock-Up), Plug | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Cover)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 9 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Gear Shaft? Brake)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 20 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Gear Shaft? Clutch)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 14 |
| 01***12 | Nut,Lock | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 14 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Gear Shaft? Drum)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***35 | Capscrew - M14 (1)/(2) | 8 |
| 01***50 | Bolt,(For Large Size Tire) | 14 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Mount)
| 01***65 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***70 | Stud | 4 |
| 01***26 | Nut,(For Rubber Shoe) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Piping)
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***30 | Bolt,(With Body Positioner) | 8 |
| 01***40 | Bolt (Op) | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Pump)
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 04***20 | Pin,Dowel (Welded) | 4 |
| 04***15 | Ring, Snap | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Transfer)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 7 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
| 01***95 | Capscrew - M12 | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Valve Seat And Valve Mount)
| 01***55 | Bolt,(See Service News) | 6 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 4 |
| 01***65 | Bolt | 4 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Valve? Inching And Clutch Spool)(#3034-3148)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 5 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Valve? Inching And Clutch Spool)(#3149-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 5 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 2 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Valve? Relief And Brake Valve)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
| 07***18 | O-Ring,(Fig.262-35)(Fig.262a-59) | 3 |
Komatsu : D85ess-2a(S/N 3034-Up (Overseas Version / S6d125e-2 (Emission) Eng. Installed)) : Work Equipment : Towing Winch (Wire Rope)
| 14***10 | Hook | 1 |
| 14***20 | Pin | 1 |
| 14***60 | Rope,Wire | 1 |
D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) serial number reference
The chassis PIN/serial plate is a riveted metal tag. Exact placement on Komatsu crawler dozers of this era is not standardized across plants - commonly it sits at or near the cab entry (inside or outside, either side) or on the frame near the operator's platform, so check around the cab doorway and frame if one location is obscured by dirt or an attachment. The plate reads the full model code "D85ESS-2A" followed by the chassis serial number; for this family it is the serial number itself (not a letter code) that marks the spec break - 3001-3033 is the earlier engine, 3034 and up carries the S6D125E-2 emission engine. The engine carries its own separate serial plate elsewhere on the block, distinct from the chassis PIN - always read both, since engine and chassis numbers are not sequential with each other. Because exact plate placement is not reliably documented for this specific serial range, confirm with your Komatsu dealer or the operation and maintenance manual for your machine.
| Prefix | Identifies | Notes |
|---|---|---|
| 3034-UP | D85ESS-2A, Overseas Version, S6D125E-2 (Emission) engine installed | Straight numeric serial-number break, not an alphanumeric PIN prefix. S/N 3034 and up in this overseas-version line carries the S6D125E-2 emission-spec engine; S/N 3001-3033 of the same overseas line carries the earlier non-emission engine. Engine rated about 149 kW (200 HP) at 1950 rpm; this S6D125E-2/E-3 engine family is shared with sibling Komatsu dozers of the same era (D65E-12, D65P-12, D70LE-12), which supports the engine assignment. Steering uses a wet multiple-disc steering clutch/brake system with a single left-hand joystick controlling steering, direction and speed; the steering brakes double as service and parking brakes. Factory offers this dozer with a choice of blade: angle dozer, straight-tilt dozer, or semi-U tilt dozer, blade capacity roughly 3.4-6.8 cu m depending on which blade is fitted - it is not a single fixed blade configuration. Operating weight is about 20,670 kg (45,570 lb). No separate Std/XL/LGP prefix split is documented for this exact serial range; treat as one continuous overseas-spec production run distinguished by the 3034 engine-emission breakpoint. Confirm exact plant/region and production years with a dealer, as these are not reliably documented for this range. |
Frequently asked questions
What engine does the Komatsu D85ESS-2A (S/N 3034-UP) use?
This serial break runs the Komatsu S6D125E-2, a turbocharged, water-cooled, direct-injection 6-cylinder diesel (125 mm x 150 mm bore and stroke, 11.04 L displacement) rated 149 kW / 200 HP net at 1950 rpm. This is the emissions-compliant version of the engine, installed starting at S/N 3034; earlier machines in the 3001-3033 range of this same overseas line carried the prior non-emission engine.
What is the operating weight of the D85ESS-2A?
Factory operating weight (angle dozer blade, multi-shank ripper, canopy, full fluids and operator) is 20,670 kg (45,570 lb). Bare tractor weight with standard shoes and ROPS canopy runs closer to 15,420 kg (34,000 lb). Actual weight varies by blade type (angle, straight-tilt, or semi-U tilt), swamp shoe width (510-660 mm), and cab or canopy choice, so treat the operating-weight figure as configuration-dependent.
What replaced the D85ESS-2A?
Nothing has directly replaced it in Komatsu's own lineup. The ESS "Advance Skidder" swamp/logging line has stayed in the catalog under the D85ESS-2A name through a long production run, with only the engine's emissions update at the 3034 serial break documented as a change. Komatsu's mainstream D85 dozer line has since moved on to later dozer generations, but those are parallel standard-duty and swamp-shoe models, not a one-for-one replacement for this skidder configuration.
What D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) owners discuss
What powertrain behavior do owners flag most on this D85ESS-2A generation dozer?
The recurring complaint across mechanical discussion boards is torque converter overheating under sustained heavy dozing, not converter failure itself. In most reported cases the root cause is a plugged transmission oil cooler, low or degraded transmission/hydraulic oil, or a torque converter relief/bypass valve stuck from debris rather than a worn converter. One documented case involved oil flooding the torque converter housing and weeping out past the starter mount after a cooler blockage went unnoticed. Owners who watch the TC oil temperature gauge during long push cycles and keep the cooler fins clean report far fewer heat-related shutdowns. Because oil is shared across the drivetrain housings on this class of dozer, a contamination or debris event in one section (transmission, torque converter, steering/brake housing) can show up as a problem elsewhere, so techs recommend sampling oil and checking all housings together rather than chasing a single component.
Are there known steering response quirks on this dozer family, and is it safety related?
Yes. A pattern reported on this general D85 mechanical steering/brake platform is intermittent loss of steer response after 10-20 minutes of work, with the machine regaining function after sitting and cooling, then losing it again after another short run. The traced cause in a documented repair was a disintegrating oil filter element sending paper and media fragments into the steering/brake control valve body, sticking the spool. Flushing the valve body, replacing the filter, and cleaning the housing resolved it. Because loss of steering or braking response on a dozer is a safety-critical failure mode, any intermittent steer or brake complaint on this machine should have your dealer verify the control valve and brake circuit before returning it to service.
What undercarriage wear patterns are typical for this dozer class, and how do sellers/buyers judge remaining life?
Community consensus (mechanics and equipment appraisers) is that undercarriage condition, not engine hours alone, drives resale value on machines this size. Expect wear concentrated at the front idler, drive sprocket teeth, and the lower track rollers riding under the machine's weight, with drier or more abrasive ground accelerating pin-and-bushing wear versus wet or lubricated conditions. The drive sprocket on this platform uses an odd tooth-count layout so the same tooth does not always engage the same bushing, spreading wear more evenly across the ring. Reported practice for judging remaining life is a caliper or sonic thickness check on pins, bushings, rail height, and sprocket teeth, cross-referenced against factory wear charts, rather than relying on total hour meter reading. Uneven wear side to side is called out repeatedly as a red flag pointing to blade-load habits, track sag, or frame misalignment rather than normal use.
What engine quirks come up for the S6D125E-2 used in this machine, and is it considered reliable?
The consensus among mechanics discussing the S6D125-series engines Komatsu used across this dozer class is that the engine itself is durable when maintenance is kept current, with one common remark being that these engines tend to run until something else around them fails rather than wearing out on their own. The turbocharger is the component most often flagged for attention: symptoms reported are sluggish response, increased black smoke, and higher fuel use as boost drops, usually traced to worn turbo bearings, restricted or contaminated oil supply to the turbo, or damaged turbine blades from ingested debris. On the fuel side, water intrusion at the fuel/water separator is called out as the main threat to the injection pump and injectors on this engine family; even small amounts of water can pit injector tips and corrode pump internals, so daily draining of the separator bowl and sticking to factory filter intervals is the standard advice repeated across sources.
What electrical or sensor issues come up on Komatsu dozers of this control generation?
Most electrical complaints on Komatsu dozers of this era trace back to connector corrosion from moisture intrusion rather than sensor or module failure, producing intermittent monitor warnings or gauge readings that come and go with weather or washdown. Hydraulic and engine pressure/temperature sensors are named most often as sources of nuisance fault codes when their wiring or connector pins corrode. General advice from mechanics is to check battery voltage and ground straps first when chasing erratic warning lights, since unstable supply voltage can cascade into multiple false sensor faults, then inspect and clean connectors with contact cleaner before replacing a sensor outright.
Is there a known blade/joystick control quirk owners mention for this machine's hydraulic control valves?
Yes, a recurring theme in dozer joystick control discussions applicable to this class of machine is developing play in the work equipment PPC (pilot pressure control) valve linkage over time. As the push rods inside the valve wear, the joystick travel needed to fully actuate a function increases, which shows up as sluggish or delayed blade response, difficulty holding a position, or the blade float detent failing to latch. The documented fix is adjusting or replacing the worn PPC valve linkage per the service manual's play-adjustment procedure rather than replacing the whole valve group, which mechanics note often gets skipped because the symptom is mistaken for a hydraulic pump or main control valve problem.
What should a buyer check before purchasing a used D85ESS-2A of this serial range?
Buyer advice repeated across equipment-inspection sources, applied to this dozer class: start with a full walk-around for cylinder, final drive, and engine/transmission oil leaks, and check all fluid levels cold before starting. Have the undercarriage measured (pins, bushings, rail, sprocket teeth) against factory wear limits rather than judging by eye or hour meter, since wear rate depends heavily on prior ground conditions. Start the engine cold and listen for turbo whine, unusual knock, or excess smoke on startup and under load. Run the machine through steering, braking, and blade functions under load, watching the torque converter oil temperature gauge during a sustained push to rule out cooler or valve issues, and cycling the blade lever slowly to check for lag or drift pointing to PPC valve wear. Request maintenance records and oil sample history, since a documented service history is treated as a stronger reliability indicator than hours alone on this class of machine. Because steering/brake response and hydraulic function are safety-critical, have your dealer verify the steering/brake control valve, brake wear, and torque converter condition before putting a used unit into full service.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Komatsu D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)). Related factory variants of the same model family:
D85ESS-2A(S/N 3001-3033-UP (Overseas Version))D85E-SS-2A(S/N 3001-3033)
Need a specific D85ESS-2A(S/N 3034-UP (Overseas Version / S6D125E-2 (Emission) Eng. Installed)) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.