Komatsubulldozerlarge (d80 - )
Komatsu D80A-18(S/N 25001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu D80A-18 is a heavy crawler tractor (dozer) in the 200-250 hp class, powered by a 6-cylinder NT-855 engine producing 220 hp gross power. It has an operating weight of approximately 51,390 lb (23,310 kg) and was produced for serial numbers 25001 and up. The machine features a direct drive transmission with 5 forward and 4 reverse gears, a standard blade with 8.5 yd³ capacity, and an undercarriage with 38 shoes per side. It succeeded earlier D80A variants and was followed by the D80E-18 and D80P-18 series.
Across the D80A-18, D80E-18, and D80P-18 generations, the core chassis and powertrain remained consistent, but emissions systems and engine management evolved to meet regional standards. The D80A-18 matters in the used and parts market because its simple, robust NT-855 engine and direct-drive transmission are widely supported by aftermarket components. Its heavy undercarriage and high operating weight make it a staple in mining and large-scale earthmoving, ensuring steady demand for replacement tracks, rollers, and engine parts.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu D80A-18(S/N 25001-UP) specifications
Engine
| Engine Model | NT-855 |
| Number of Cylinders | 6 |
| Displacement | 855 cu in (14011 cc) |
| Gross Power | 220 hp (164 kW) |
| Power Measured At | 1800 rpm |
| Max Torque | 759 lb ft (1029 N m) |
Weights
| Operating Weight | 51389.8 lb (23310 kg) |
Dimensions
| Length With Blade | 22.28 ft (6.79 m) |
| Length Without Blade | 15.36 ft (4.69 m) |
| Width Over Tracks | 8.6 ft (2.62 m) |
| Height To Top Of Cab | 11.14 ft (3.41 m) |
| Length Of Track On Ground | 8.96 ft (2.74 m) |
| Ground Clearance | 1.33 ft (0.41 m) |
| Track Gauge | 6.57 ft (2.01 m) |
| Standard Shoe Size | 22.05 in (56 cm) |
| Number Of Shoes Per Side | 38 |
| Number Of Carrier Rollers Per Side | 2 |
| Number Of Track Rollers Per Side | 6 |
| Track Pitch | 8.51 in (21.6 cm) |
Performance
| Ground Pressure | 8.67 psi (0.6 bar) |
| Transmission Type | DD |
| Number Of Forward Gears | 5 |
| Number Of Reverse Gears | 4 |
| Max Speed Forward | 5 mph (8.0 km/h) |
| Max Speed Reverse | 5.9 mph (9.5 km/h) |
Blades
| Standard Blade Width | 12.3 ft (3.76 m) |
| Standard Blade Height | 51.8 in (1.32 m) |
| Standard Blade Capacity | 8.5 yd3 (6.5 m3) |
| Standard Blade Cutting Depth | 21.3 in (0.54 m) |
Service Capacities
| Fuel Capacity | 118.9 gal (450.1 L) |
| Cooling System Fluid Capacity | 20.9 gal (79.1 L) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
D80A-18(S/N 25001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (w/ filter) | Not documented for this exact serial range — verify with your dealer | Not documented for this exact serial range — verify with your dealer |
| Cooling System | 79.1 l (20.9 gal) | Super-coolant AF-NAC |
| Fuel Tank | 450.1 l (118.9 gal) | Not documented |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu D80A-18(S/N 25001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the D80A-18(S/N 25001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
Use KOWA fluid analysis at every major service interval to monitor engine wear metals, hydraulic particle counts, and coolant SCA levels. Check final drive oil levels at 250 hours and change at 1,000 hours. Monitor transmission oil condition at 1,000 hours. Track undercarriage wear visually at 500 hours and measure at 1,000 hours. Inspect turbocharger condition at 1,000 hours. Test battery load at 500 hours.
Corrective & Common Repairs
Address hydraulic hose leaks and cracked fittings during daily checks. Replace fuel filters and drain water separators at 500 hours to prevent injector issues. Check and torque ROPS bolts and cutting edge bolts at 2,000 hours. Inspect track tension and shoe condition daily to prevent premature undercarriage wear. Replace hydraulic return filters at 500 hours. Check belt and hose integrity at 250 hours.
Overhaul & Rebuild Points
Plan major engine overhaul based on KOWA analysis and hour count, typically around 10,000-15,000 hours for the NT-855. Rebuild transmission and torque converter at 2,000 hours or if slippage occurs. Inspect final drives for oil leaks and wear at 1,000 hours. Replace undercarriage components (rollers, sprockets, idlers) based on wear measurements at 1,000 hours. Check structural welds at 1,000 hours.
Seasonal & Environment Servicing
In cold weather, ensure coolant concentration is adequate and drain water from fuel separator daily. In hot weather, clean radiator and oil cooler fins daily to prevent overheating. Check DEF level on Tier 4 models daily. Inspect air filter restriction indicator frequently in dusty conditions. Grease all points more often in abrasive environments. Check track tension regularly on rocky terrain.
D80A-18(S/N 25001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| 09019-08035 | Wrench,Filter (For Add. Fuel Filter) | Fuel system service | Check fitment → |
| 600-211-1230 | Cartridge,Oil Filter | Lubrication service | Check fitment → |
| 6710-51-4800 | Oil Filter Ass'Y | Lubrication service | Check fitment → |
| 6711-61-5300 | Element,Oil Cooler | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
D80A-18(S/N 25001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CA115 | Engine crankshaft speed sensor failure | Broken sensor, wiring issue, or connector corrosion | Replace the speed sensor and verify the voltage at the pin connector |
| CA111 | Internal engine controller fault | ECM internal abnormality | Replace or reprogram the ECM |
| CA451 | Common rail pressure sensor feedback value too high | Malfunction in the rail sensor or actual overpressure condition | Diagnose the fuel rail pressure sensor or pump lines |
| AA10NX | Air cleaner clogging | Dirty or blocked air filter element | Replace the air filter |
| CA234 | Engine overspeed | Throttle calibration error, engine load cycle issue, or operator misuse | Verify throttle calibration and engine load cycle |
| CA441 | Battery voltage too low | Weak battery or charging system failure | Replace the alternator or battery; check the voltage regulator |
| CA442 | Battery voltage too high | Alternator overcharging or voltage regulator failure | Replace the alternator or battery; check the voltage regulator |
| CA122 | Intake air pressure high voltage | Sensor malfunction or wiring issue | Verify the intake pressure sensor and wiring |
| CA123 | Intake air pressure low voltage | Sensor short or airflow restriction | Check for a sensor short or an airflow restriction |
| CA153 | Intake air temperature sensor error | Faulty IAT sensor | Replace or test the IAT sensor |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
D80A-18(S/N 25001-UP) attachments & work tools
Blades
Standard configuration includes a straight blade with a width of 3.76 m (12.3 ft), height of 1.32 m (51.8 in), and capacity of 6.49 m³ (8.5 yd³). Variations in cut depth and specific blade types such as SU or A configurations are not documented for this exact serial range in the provided sources.
Rippers
The provided source texts do not specify ripper options, shank configurations, or weights for the Komatsu D80A-18(S/N 25001-UP). Ripper data is only listed for other models such as the D39E-1 and D61PX-15.
Winches
Winch class and towing options are not documented for the Komatsu D80A-18(S/N 25001-UP) in the provided source texts. General Komatsu bulldozer attachments are noted to include winches, but specific data for this model is absent.
Drawbars/Counterweights
Drawbar and counterweight specifications are not documented for the Komatsu D80A-18(S/N 25001-UP) in the provided source texts.
Cab/ROPS Guarding
Forestry and waste configuration guarding options are not documented for the Komatsu D80A-18(S/N 25001-UP) in the provided source texts. General operator comfort features are mentioned for the broader Komatsu bulldozer line.
Hydraulic Arrangement
Specific hydraulic arrangement notes for front or rear tools are not documented for the Komatsu D80A-18(S/N 25001-UP) in the provided source texts. The machine utilizes a direct drive transmission and is equipped with a 6-cylinder NT-855 engine.
All D80A-18(S/N 25001-UP) assemblies by section
Every catalogued assembly group for the Komatsu D80A-18(S/N 25001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Engine Related Parts And Electrical System
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Battery And Relay Switch
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Decelerator Pedal(#25001-25400)
| 01***30 | Bolt,(Cold Terrain Spec.) | 3 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 1 |
| 01***25 | Bolt - Rear Guard Mounting | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Decelerator Pedal(#25401-)
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Electrical System (1/3)
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Electrical System (2/3)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 3 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Electrical System (3/3)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 20 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***11 | Nut (Op) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Engine Mount
| 01***55 | Bolt | 4 |
| 01***00 | Bolt | 4 |
| 01***60 | Washer,Single Flange (Trimming) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Fuel Control Lever
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***35 | Bolt, Stopper | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Fuel Control Linkage
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Fuel Piping(#25001-25400)
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***25 | Bolt - Rear Guard Mounting | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Fuel Piping(#25401-)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 4 |
| 01***20 | Bolt,(Used When Towing Winch) | 1 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Fuel Tank(#25001-25400)
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 2 |
| 01***50 | Bolt, Fuel Tank Mounting - Front Left | 10 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Fuel Tank(#25401-)
| 01***45 | Bolt, Fuel Tank Mounting - Front Right | 10 |
| 01***60 | Washer,Spring | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 10 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Instrument Panel
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Power Take Off
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Radiator Fan Guard(#25001-26042)
| 01***30 | Bolt,(For France Noise Suppression) | 8 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 11 |
| 01***45 | Bolt,(Cold Terrain Spec.) | 12 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Radiator Fan Guard(#26043-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 11 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Radiator Fan Pully(#25001-25400)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 3 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 12 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Radiator Fan Pully(#25401-)
| 01***30 | Bolt,(For France Noise Suppression) | 5 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 12 |
| 01***70 | Bolt | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Radiator Mounting(#26043-)
| 01***35 | Bolt | 4 |
| 01***75 | Bolt,(For Adjusting) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 14 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Radiator Piping And Wind Braker(#25001-26042)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 3 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 14 |
| 01***20 | Bolt,(Used When Towing Winch) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Radiator Piping And Wind Braker(#26043-)
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Radiator(#25001-26042)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 94 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 4 |
| 01***40 | Bolt,(Dust And Dirt Protection) | 16 |
Komatsu : D80a-18(S/N 25001-Up) : Engine Related Parts And Electrical System : Radiator(#26043-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 84 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
Guard
Komatsu : D80a-18(S/N 25001-Up) : Guard : Bottom Guard
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***45 | Bolt | 28 |
| 01***50 | Bolt,(For Tree Pusher) | 28 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Cylinder Stay
| 01***85 | Bolt | 4 |
| 01***95 | Bolt | 4 |
| 01***45 | Bolt | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Drawbar
| 01***85 | Bolt | 6 |
| 01***75 | Bolt | 1 |
| 01***26 | Nut,(For Rubber Shoe) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Engine Hood And Dashboard
| 01***12 | Bolt,(With Cylinder Cover) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 18 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Equalizer Bar
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***40 | Bolt,(With Center Guard) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Fender
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 4 |
| 01***35 | Bolt, Hydraulic Tank Mounting | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Floor Plate
| 01***30 | Bolt,(Not Used With Emergency Str.) | 29 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***90 | Bolt,(Without Giant Ripper) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Marks And Plates? Arabic
| 01***06 | Screw | 4 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
| 09***07 | Plate? Name,Pre-Heater Switch | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Marks And Plates? Chinese
| 01***06 | Screw | 4 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
| 09***43 | Plate? Name,Machine (Limited Supply) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Marks And Plates? English
| 01***06 | Screw | 4 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
| 09***43 | Plate? Name,(Limited Supply) (English) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Marks And Plates? French
| 01***06 | Screw | 4 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
| 09***43 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Marks And Plates? German
| 01***06 | Screw | 4 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
| 09***43 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Marks And Plates? Indonesian
| 01***06 | Screw | 4 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
| 09***43 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Marks And Plates? Spanish
| 01***06 | Screw | 4 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
| 09***43 | Plate? Name,(Limited Supply) (English) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Operator'S Seat(#25001-25026)
Komatsu : D80a-18(S/N 25001-Up) : Guard : Operator'S Seat(#25027-25400)
| 01***12 | Bolt,(Without R.P.C.U.) | 1 |
| 01***25 | Bolt,(Without Auto Priming System) | 16 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Operator'S Seat(#25401-)
| 01***25 | Bolt,Without Revolution Sensor | 16 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 9 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Radiator Guard(#25001-26042)
| 01***25 | Bolt,(Without Auto Priming System) | 12 |
| 01***35 | Bolt,(Without Auto Priming System) | 2 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 12 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Radiator Guard(#26043-)
| 01***25 | Bolt,Without Revolution Sensor | 12 |
| 01***35 | Bolt,(For Position Fixing) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
Komatsu : D80a-18(S/N 25001-Up) : Guard : Support And Rear Cover
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Main Clutch? Torque Convertor And Transmission
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Counter Shaft
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
| 01***40 | Bolt,(With Service Valve R.H.) | 6 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Gear Shift Fork
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 12 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Gear Shift Lever
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***16 | Screw | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Inertia Brake
| 01***14 | Bolt | 2 |
| 01***65 | Bolt,(For Suction Fan)(4d130-1d) | 1 |
| 01***75 | Stud | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Intermediate Shaft
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
| 01***40 | Bolt,(With Service Valve R.H.) | 6 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Clutch And Gear Shift Lever
| 01***35 | Bolt, Mounting - Flywheel Housing End | 1 |
| 01***25 | Bolt - Rear Guard Mounting | 4 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 14 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Clutch Booster
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***45 | Bolt,(S6d155-4b) | 4 |
| 01***30 | Bolt,(For France Noise Suppression) | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Clutch Disc And Plate
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 9 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 12 |
| 01***11 | Nut (M14-1.50 Thd), Nut; Was 01582-01411 | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Clutch Drive Shaft
| 01***35 | Bolt, Mounting - Flywheel Housing End | 8 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 5 |
| 01***50 | Bolt, Radiator To Frame | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Clutch Housing
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 6 |
| 01***30 | Bolt,(For France Noise Suppression) | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Clutch Lever Linkage
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 4 |
| 01***45 | Bolt,(Cold Terrain Spec.) | 3 |
| 01***25 | Screw | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Clutch Piping (1/2)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 6 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Clutch Piping (2/2)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***50 | Bolt | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Clutch Pump
| 04***18 | Ring,Snap (Itl) | 1 |
| 07***60 | Seal (Kit) | 1 |
| 07***03 | Pump Ass'Y,Torqflow Transmission | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Main Shaft
| 01***10 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Transmission Case And Lubrication Oil Piping
| 01***75 | Bolt,(For 75a Alternator) | 4 |
| 01***40 | Bolt,(With Service Valve R.H.) | 10 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 14 |
Komatsu : D80a-18(S/N 25001-Up) : Main Clutch? Torque Convertor And Transmission : Universal Joint
| 01***55 | Bolt, Mount Lh Bracket | 8 |
| 01***60 | Bolt, Tube To Oil Cooler | 8 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 16 |
Nt-855-1a S/N 139838-Up
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Air Cleaner And Pre-Cleaner
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
| 01***45 | Bolt | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Air Cleaner And Pre-Cleaner (For Trimming Dozer) (Tunnel Spec.)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
| 01***45 | Bolt | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Air Intake Manifold And Connection
| 01***25 | Bolt,(Without Auto Priming System) | 4 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 2 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Alternator (1.2kw? 50a) (Delco-Remy)
| 60***90 | Alternator A. (50a) | 1 |
| CU***71 | Resistor | 3 |
| CU***06 | Washer | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Alternator (25a)(#139838-187609)
| 60***70 | Alternator A. (25a) | 1 |
| KD***37 | Bearing,Ball? Front | 1 |
| KD***20 | Holder,Brush | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Alternator (35a)(#187610-)
| 60***60 | Alternator A. (35a) | 1 |
| KD***80 | Collar | 1 |
| KD***70 | Rear Bracket Ass'Y,Rear | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Alternator (Sandy And Dusty Spec.) (25a)
| 60***71 | Alternator A. (25a) | 1 |
| KD***20 | Collar | 1 |
| KD***82 | Rotor Ass'Y | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Alternator And Mounting
| 01***60 | Bolt, Trunnion Cap | 1 |
| 01***35 | Bolt,(Cold Weather Spec.) | 1 |
| 01***55 | Bolt | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Alternator And Mounting (1.2kw? 50a)
| 01***65 | Bolt, Mount Side Weights | 1 |
| 01***16 | Nut,(Balancer) | 1 |
| 01***19 | Washer,(Not Used With Ventilator) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Cam Follower And Push Rod
| 02***25 | Bolt | 18 |
| 02***24 | Washer,Radio Controlled Slag Handling | 18 |
| 66***10 | Housing Ass'Y,Cam Follower | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Camshaft
| 02***25 | Key | 1 |
| 02***04 | Plug,(For Shipping) | 1 |
| 66***30 | Washer,Thrust | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Cooling Fan And Tension Pulley
| 01***16 | Bolt (Welded) | 4 |
| 01***20 | Bolt | 2 |
| 01***11 | Nut,(For Center Guard) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Corrosion Resistor
| 01***29 | Washer,Spring (Cold Weather Spec.) | 4 |
| 02***32 | Bolt,(With Joy Stick Steering) | 4 |
| 07***40 | Hose,See Fig. K4010-05a0 | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Crankshaft And Vibration Damper
| 01***25 | Bolt - Rear Guard Mounting | 6 |
| 01***36 | Washer,Radio Controlled Slag Handling | 6 |
| 01***48 | Washer,Spring? Single Flange | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Cylinder Block
| 02***16 | Bolt | 12 |
| 02***25 | Bolt,(Cold Weather Spec.) | 2 |
| 02***16 | Bolt | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Cylinder Head
| 02***04 | Plug | 6 |
| 02***04 | Plug,(For Shipping) | 4 |
| 02***07 | Plug,(For Shipping) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Engine Support
| 01***45 | Bolt | 8 |
| 66***31 | Plate,Lock (K5) | 4 |
| 66***10 | Bracket,R.H | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Exhaust Manifold
| 01***45 | Screw | 4 |
| 01***50 | Bolt | 4 |
| 02***38 | Bolt | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Flywheel And Flywheel Housing
| 01***30 | Bolt,Radio Controlled Slag Handling | 6 |
| 01***55 | Bolt,(For France Noise Suppression) | 4 |
| 01***36 | Washer,Radio Controlled Slag Handling | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Fuel Filter(#139838-155378)
| 01***12 | Bolt (M8-1.25x12) | 1 |
| 01***40 | Bolt,(For Position Fixing) | 2 |
| 04***12 | Wire,Lock | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Fuel Filter(#155379-)
| 01***29 | Washer,Spring (Cold Weather Spec.) | 4 |
| 02***32 | Bolt,(With Joy Stick Steering) | 4 |
| 02***25 | Bolt | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Gasket Kit
| 01***23 | Washer,(Not Shown) | 1 |
| 02***07 | O-Ring (K6) | 1 |
| 02***18 | O-Ring,Filter | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Gear Case Cover
| 02***25 | Bolt,(Cold Weather Spec.) | 3 |
| 02***51 | Bolt | 9 |
| 02***57 | Bolt | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Hand Primer(#155814-)
| 66***01 | Hand Primer Ass'Y,Priming | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Injection And Fuel Connection
| 67***20 | Plunger Ass'Y | 1 |
| 67***31 | Plunger Ass'Y | 1 |
| 67***10 | Adapter,Injector | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Lubricating Oil Bypass Filter
| 02***32 | Bolt | 2 |
| 02***20 | Washer,Spring | 2 |
| 02***01 | O-Ring (Kit) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Lubricating Oil Cooler (Main Clutch)
| 01***29 | Washer,Spring (Cold Weather Spec.) | 24 |
| 01***38 | Washer,Radio Controlled Slag Handling | 2 |
| 01***16 | Washer,Radio Controlled Slag Handling | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Lubricating Oil Cooler And Oil Filter
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 3 |
| 01***29 | Washer,Spring (Cold Weather Spec.) | 7 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Lubricating Oil Piping
| 01***16 | Bolt,(For Slag Handling) | 1 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 1 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Lubricating Oil Pump
| 02***83 | Bolt | 6 |
| 02***95 | Bolt | 1 |
| 02***22 | Bolt | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Muffler
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***70 | Screw | 2 |
| 01***30 | Bolt | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Oil Pan
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : P.T.O. Lubricating Oil Piping
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 4 |
| 07***15 | Gasket,(Hd325?Pc750?800?1800) (A5010) | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Piston And Connecting Rod
| 02***13 | Pin,Dowel | 2 |
| 66***30 | Ring,Snap | 2 |
| 67***21 | Piston Ring Ass'Y | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Power Take Off
| 01***35 | Bolt, Mounting - Flywheel Housing End | 5 |
| 01***40 | Bolt,(Dust And Dirt Protection) | 2 |
| 01***35 | Bolt,(For Pedal Steering) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump (1/7)
| 02***04 | Nut | 2 |
| 02***04 | Plug | 4 |
| 02***18 | O-Ring,Filter | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump (2/7)
| 01***20 | Washer,Spring | 3 |
| 02***25 | Bolt,Radio Controlled Slag Handling | 2 |
| 02***04 | Nut | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump (3/7)
| 01***13 | Washer,(For Alternator 50a) | 2 |
| 01***20 | Washer,Spring | 8 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump (4/7)
| 01***20 | Washer,Spring | 4 |
| 02***32 | Bolt,(Logging Spec.) | 2 |
| 66***20 | Ring,Snap | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump (5/7)
| 02***45 | Bolt | 2 |
| 02***12 | Washer,Spring | 4 |
| 66***30 | Washer,Spring | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump (6/7)
| 01***20 | Washer,Spring | 5 |
| 02***32 | Bolt,(Logging Spec.) | 3 |
| 02***38 | Bolt | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump (7/7)
| 01***20 | Washer,Spring | 2 |
| 02***32 | Bolt,(Logging Spec.) | 2 |
| 02***57 | Bolt | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump And Piping(#139838-155378)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***08 | Nut, Regular Hexagon (M10-1.50) | 1 |
| 01***18 | Nut | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump And Piping(#155379-)
| 01***20 | Bolt | 1 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***19 | Washer,(Not Used With Ventilator) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Pt Fuel Pump Drive
| 02***25 | Bolt | 5 |
| 02***28 | Washer,Spring | 5 |
| 02***19 | Key | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Rear Cover
| 02***16 | Bolt | 4 |
| 02***25 | Bolt | 2 |
| 02***32 | Bolt | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Regulator And Safety Relay
| 08***01 | Dust - Indicator | 1 |
| 60***10 | Regulator Ass'Y | 1 |
| 60***30 | Safety Relay A.,(A)(W/After Cooler)(S6d155-4b) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Rocker Arm And Housing
| 02***27 | Bolt,Radio Controlled Slag Handling | 2 |
| 02***78 | Bolt | 4 |
| 02***32 | Washer,Spring | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Rocker Arm Housing Cover
| 01***29 | Washer,Spring (Cold Weather Spec.) | 1 |
| 02***22 | Bolt | 1 |
| 02***22 | Bolt | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Starting Motor (11kw)(#139838-187612)
| 60***24 | Starting Motor A.,(11kw) (Cold Weather Spec.) | 1 |
| KD***00 | Seal Ass'Y,(Not Shown) | 1 |
| KD***82 | Screw,Dish | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Starting Motor (11kw)(#187613-194438)
| 60***60 | Starting Motor A.,(11kw) | 1 |
| SD***09 | Metal | 1 |
| SD***20 | O-Ring | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Starting Motor And Mounting (11kw)(#139838-187612)
| 01***22 | Screw | 2 |
| 01***45 | Screw | 3 |
| 01***29 | Washer,Spring (Cold Weather Spec.) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Starting Motor And Mounting (11kw)(#187613-)
| 01***45 | Bolt,(For Slag Handling) | 3 |
| 01***29 | Washer,Spring (Cold Weather Spec.) | 1 |
| 01***48 | Washer,Spring? Single Flange | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Thermostat
| 01***29 | Washer,Spring (Cold Weather Spec.) | 8 |
| 02***25 | Bolt,(Cold Weather Spec.) | 2 |
| 02***38 | Bolt,Radio Controlled Slag Handling | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Tool
| 09***35 | Wrench,Filter (For Add. Fuel Filter) | 1 |
| 09***11 | Wrench | 1 |
| 09***14 | Wrench | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Turbocharger
| 02***16 | Bolt | 16 |
| 02***20 | Washer,Radio Controlled Slag Handling | 4 |
| 02***16 | Washer,Radio Controlled Slag Handling | 16 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Turbocharger Lubricating Oil Piping
| 01***16 | Bolt,(For Slag Handling) | 1 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 1 |
| 07***10 | Hose | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Water Manifold
| 01***29 | Washer, Spring | 12 |
| 02***32 | Bolt,(With Joy Stick Steering) | 12 |
| 02***07 | Plug,(For Shipping) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Water Pump
| 01***29 | Washer,Spring (Cold Weather Spec.) | 7 |
| 02***57 | Bolt | 5 |
| 02***83 | Bolt | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Water Pump Piping
| 01***11 | Nut,(With Under Mirror) | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 1 |
| 01***29 | Washer,Spring (Cold Weather Spec.) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Water Separator And Piping(#155379-)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 4 |
| 01***08 | Nut, Regular Hexagon (M10-1.50) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Nt-855-1a S/N 139838-Up : Water Separator(#155379-)
| 07***75 | O-Ring,Steering Oil Filter | 1 |
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
| 60***60 | Plug,Drain (For Pakistan) | 1 |
Optional Parts
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : 1.2kw Alternator System
| 01***16 | Screw, Mount Parking Lights | 2 |
| 01***20 | Screw, Filter Mounting | 1 |
| 01***13 | Washer,(For Alternator 50a) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Angle Blade
| 01***35 | Bolt,(For Pedal Steering) | 28 |
| 01***45 | Washer,(Except Pll) | 36 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 28 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Angle Rake Dozer
| 01***35 | Bolt,(For Pedal Steering) | 28 |
| 01***22 | Nut,(North America Spec.) | 54 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 28 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Back-Up Alarm
| 01***16 | Bolt,(For Slag Handling) | 4 |
| 01***50 | Bolt - Torque Converter Totransmission Mounting | 2 |
| 01***50 | Bolt (Op) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Bottom Guard (Hinge Type)
| 01***45 | Bolt | 15 |
| 01***60 | Bolt | 1 |
| 01***80 | Washer,(For R.H. Steering) | 16 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : C-Frame
| 01***20 | Bolt | 6 |
| 01***35 | Bolt,(For Pedal Steering) | 2 |
| 01***80 | Bolt | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Cab Guard
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 9 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 14 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Cab Guard Sweeper
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Canopy(#25001-26098)
| 01***45 | Bolt,(Cold Terrain Spec.) | 4 |
| 01***60 | Bolt, Trunnion Cap | 8 |
| 01***40 | Bolt,(Not Used With Cab) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Canopy(#26099-)
| 01***45 | Bolt,(Cold Terrain Spec.) | 4 |
| 01***60 | Bolt, Trunnion Cap | 8 |
| 01***40 | Bolt,(Not Used With Cab) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Coal Dozer
| 01***30 | Bolt,Radio Controlled Slag Handling | 8 |
| 01***35 | Bolt,(For Pedal Steering) | 2 |
| 01***36 | Washer,Radio Controlled Slag Handling | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Compressor Related Parts
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***25 | Bolt - Rear Guard Mounting | 2 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Cooling Piping (1/2)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Cooling Piping (2/2)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 4 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 12 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 10 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Cylinder Cover
| 01***17 | Nut | 12 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 12 |
| 15***40 | U-Bolt | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Engine Side Cover? L.H.
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 5 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Engine Side Cover? L.H. (For Cold Terrain Spec.)
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Engine Side Cover? R.H.
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 5 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Engine Side Cover? R.H. (For Cold Terrain Spec.)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 3 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 5 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Frame (For Coal Dozer)
| 01***35 | Bolt,(For Pedal Steering) | 40 |
| 01***50 | Bolt | 12 |
| 01***10 | Bolt | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Furniture In Cab
| 01***20 | Bolt | 4 |
| 01***25 | Bolt (M6-1.00x25) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 9 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Grill Ass'Y (For Heater)
| 14***50 | Cable | 1 |
| 14***60 | Cable | 1 |
| 14***80 | Filter,Filter | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Head Guard(#25001-26098)
| 01***70 | Bolt, Heater Hose Clip | 8 |
| 01***75 | Bolt,(For 75a Alternator) | 8 |
| 01***40 | Bolt,(Not Used With Cab) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Head Guard(#26099-)
| 01***70 | Bolt, Heater Hose Clip | 8 |
| 01***75 | Bolt,(For 75a Alternator) | 8 |
| 01***40 | Bolt,(Not Used With Cab) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Heater Unit
| 14***80 | Motor Ass'Y | 2 |
| 14***90 | Packing | 1 |
| 14***10 | Grommet | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Heating Piping
| 01***20 | Bolt,(Large Capacity Type) (Std) | 3 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***11 | Nut,(With Under Mirror) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Hot Air Piping And Air Conditioner Related Parts
| 01***12 | Bolt,(Without R.P.C.U.) | 4 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 16 |
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Hot Air Piping And Heater Related Parts
| 01***12 | Bolt,(Without R.P.C.U.) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 16 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Muffler And Precleaner Extension (Equiped With Cab) (Sandy And Dusty Terrain Spec.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S Cabin (1/4)
| 01***12 | Bolt,(Without R.P.C.U.) | 4 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 9 |
| 01***25 | Bolt,(Without Auto Priming System) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S Cabin (2/4)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 3 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 12 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S Cabin (3/4)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 24 |
| 01***16 | Screw,(Not Used When Ventilator) | 12 |
| 01***16 | Screw | 20 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S Cabin (4/4)
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
| 01***55 | Screw | 9 |
| 01***75 | Bolt | 9 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S Cabin Electrical System (1/2)
| 01***16 | Bolt (Welded) | 31 |
| 01***16 | Screw,(Not Used When Ventilator) | 6 |
| 01***19 | Washer,Spring | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S Cabin Electrical System (2/2)
| 01***16 | Bolt,(For Slag Handling) | 12 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 5 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S Cabin Interior System (1/2)
| 01***06 | Screw | 1 |
| 01***12 | Screw | 9 |
| 01***12 | Screw | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S Cabin Interior System (2/2)
| 01***20 | Bolt | 4 |
| 01***25 | Bolt,(Without Auto Priming System) | 8 |
| 01***16 | Screw,(Not Used When Ventilator) | 12 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S.
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 2 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : R.O.P.S. Bracket
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 6 |
| 01***50 | Capscrew | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Radiator Shutter? Slit Cover On Hood And Rear Cover
| 01***12 | Bolt (M8-1.25x12) | 20 |
| 01***20 | Bolt,(Used When Towing Winch) | 16 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Rear Lamp
| 01***25 | Bolt - Rear Guard Mounting | 1 |
| 01***45 | Bolt, Mount Center Hinge Retainer (Lower) | 3 |
| 01***11 | Nut,(For Center Guard) | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Shear Blade
| 01***30 | Bolt,(For Center Guard) | 12 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 12 |
| 04***25 | Pin,Cotter? Link Pin | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Straight Blade
| 01***35 | Bolt,(For Pedal Steering) | 2 |
| 01***45 | Washer,(Except Pll) | 32 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Straight Frame
| 01***70 | Bolt, Heater Hose Clip | 4 |
| 01***35 | Bolt,(For Pedal Steering) | 32 |
| 01***50 | Bolt | 12 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Straight Rake Dozer
| 01***35 | Bolt,(For Pedal Steering) | 2 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 2 |
| 01***80 | Washer,(For R.H. Steering) | 54 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Swing Drawbar
| 01***50 | Bolt | 6 |
| 01***85 | Bolt | 6 |
| 01***50 | Bolt | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : U-Blade
| 01***35 | Bolt,(For Pedal Steering) | 2 |
| 01***45 | Washer,(Except Pll) | 33 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Optional Parts : Vandalisum Protection
| 01***12 | Bolt,(Without R.P.C.U.) | 4 |
| 01***25 | Bolt - Rear Guard Mounting | 5 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 1 |
Steering System And Final Drive
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Bevel Gear And Shaft(#25001-25466)
| 01***45 | Bolt, Mount Center Hinge Retainer (Lower) | 16 |
| 01***45 | Bolt,(For Slag Handling) | 24 |
| 01***15 | Nut | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Bevel Gear And Shaft(#25467-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***45 | Bolt, Mount Center Hinge Retainer (Upper) | 16 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 24 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Brake Band And Linkage
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***50 | Bolt,(Without R.O.P.S.) | 8 |
| 01***10 | Nut,L.H. Thread | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Brake Booster
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
| 01***55 | Bolt, Mount Lh Bracket | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Brake Housing And Piping
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***50 | Bolt,(With Service Valve R.H.) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Brake Pedal
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 4 |
| 01***08 | Nut,L.H. Thread | 4 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Final Drive Case And Gear (1/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***40 | Bolt,(With Center Guard) | 24 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Final Drive Case And Gear (2/2)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 40 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 12 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Main Relief Valve And Safety Valve
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Oil Strainer
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 10 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Parking Brake Lever
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Sprocket And Shaft
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***40 | Bolt,(With Center Guard) | 12 |
| 01***35 | Bolt | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering And Brake Linkage (1/2)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
| 01***40 | Bolt,(With Center Guard) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering And Brake Linkage (2/2)
| 01***11 | Nut - Mounting | 6 |
| 04***22 | Pin, Cotter | 8 |
| 04***38 | Pin,Cotter | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering Case And Main Frame
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 3 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering Clutch
| 01***50 | Bolt,(Without R.O.P.S.) | 16 |
| 01***54 | Washer,Spring (D65p) | 16 |
| 01***45 | Washer,(Without R.O.P.S.) | 16 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering Control Lever
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering Control Valve
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering Oil Filter
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 4 |
| 01***07 | Castle Nut | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering Piping (1/3)
| 01***35 | Bolt, Mounting - Flywheel Housing End | 7 |
| 01***80 | Bolt, Mount Strainer Flange | 1 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 10 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering Piping (2/3)
| 01***30 | Bolt,(For France Noise Suppression) | 1 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 7 |
| 01***25 | Bolt - Rear Guard Mounting | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering Piping (3/3)
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
| 01***65 | Bolt,(For Suction Fan)(4d130-1d) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Steering System And Final Drive : Steering Pump
| 04***20 | Ring, Snap | 1 |
| 07***60 | Seal,Oil | 1 |
| 07***02 | Pump Ass'Y,(Far063-201) | 1 |
Tool And Kit
Komatsu : D80a-18(S/N 25001-Up) : Tool And Kit : Kit
| 04***12 | Pin,Cotter? Shaft | 1 |
| 04***28 | Pin,Cotter | 1 |
| 04***40 | Pin,Cotter? Lever | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Tool And Kit : Tool
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***00 | Nozzle, Grease Pump (Flexible Type) | 1 |
Track
Komatsu : D80a-18(S/N 25001-Up) : Track : Carrier Roller
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***60 | Bolt, Mount Pole | 16 |
| 01***80 | Bolt,(For 100kg) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Idler
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
| 01***35 | Bolt, Hydraulic Tank Mounting | 4 |
| 01***55 | Bolt | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Recoil Spring
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Frame
| 01***00 | Screw | 4 |
| 01***10 | Bolt (Op) | 1 |
| 01***50 | Capscrew | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Frame Cover
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 28 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Roller
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
| 01***75 | Bolt,(Single Flange) | 48 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 12 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Roller Guard
| 01***40 | Bolt (Op) | 12 |
| 01***65 | Bolt | 24 |
| 01***19 | Nut - M24 | 10 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Shoe (Lubricate Type) (For Cold Terrain Spec.)(#25948-)
| 01***26 | Nut? Shoe (Kit) | 288 |
| 07***30 | Plug,(Large) | 76 |
| 07***21 | Plug,(Small) | 76 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Shoe (Lubricate Type)(#25001-25172)
| 01***26 | Nut? Shoe (Kit) | 348 |
| 15***30 | Track Link Ass'Y | 1 |
| 15***31 | Track Link Ass'Y | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Shoe (Lubricate Type)(#25173-25449)
| 01***26 | Nut? Shoe (Kit) | 288 |
| 15***31 | Track Link Ass'Y | 1 |
| 15***32 | Track Link Ass'Y | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Shoe (Lubricate Type)(#25450-25947)
| 01***26 | Nut? Shoe (Kit) | 288 |
| 15***33 | Track Link Ass'Y | 1 |
| 15***34 | Track Link Ass'Y | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Shoe (Lubricate Type)(#25948-)
| 01***26 | Nut? Shoe (Kit) | 288 |
| 07***30 | Plug,(Large) | 76 |
| 07***21 | Plug,(Small) | 76 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Shoe (Master Link Type)(#25001-25172)
| 01***26 | Nut? Shoe (Kit) | 288 |
| 15***20 | Track Link Ass'Y | 1 |
| 15***21 | Track Link Ass'Y | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Shoe (Master Link Type)(#25173-25947)
| 01***26 | Nut? Shoe (Kit) | 288 |
| 15***21 | Track Link Ass'Y | 1 |
| 15***22 | Track Link Ass'Y | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Track : Track Shoe (Master Pin Type)
| 01***26 | Nut? Shoe (Kit) | 304 |
| 15***10 | Track Link Ass'Y | 1 |
| 15***11 | Track Link Ass'Y | 1 |
Work Equipment
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment : Straight Tilt Blade
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 2 |
| 01***45 | Washer,(Except Pll) | 32 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment : Straight Tilt Frame
| 01***70 | Bolt, Accumulator Mounting Bracket | 4 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 32 |
| 01***50 | Bolt | 12 |
Work Equipment Control System
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Control Lever : Unit_01_of_02
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 2 |
| 01***35 | Bolt,(Without Auto Priming System) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Control Lever : Unit_02_of_02
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***35 | Bolt,(For Position Fixing) | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Control Linkage
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***10 | Bolt, Fan Mounting | 2 |
| 01***15 | Bolt,(With Air Conditioner Type) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Lift And Tilt Control Valve (1/2)(#25001-25400)
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
| 01***80 | Bolt,(Shim 5 Pieces Over) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Lift And Tilt Control Valve (1/2)(#25401-)
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***95 | Bolt,(For Reversible Fan) | 3 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Lift And Tilt Control Valve (2/2)(#25001-25400)
| 01***35 | Bolt,(Without Auto Priming System) | 1 |
| 01***55 | Bolt,(For France Noise Suppression) | 2 |
| 01***60 | Bolt, Trunnion Cap | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Lift And Tilt Control Valve (2/2)(#25401-)
| 01***80 | Bolt, Cushion Mounting | 1 |
| 01***95 | Bolt | 2 |
| 01***05 | Bolt | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Lift Cylinder (1/2)
| 01***60 | Bolt,(For Japan And Sweden) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Lift Cylinder (2/2)
| 01***15 | Bolt | 2 |
| 01***48 | Washer,Spring (For Slag Handling), Washer-Spring | 2 |
| 01***16 | Washer, 1.6 mm Thick | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Tilt And Ripper Control Servo Valve
| 01***16 | Bolt,(For Slag Handling) | 1 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 6 |
| 01***25 | Bolt,(Without Auto Priming System) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Tilt Cylinder(#25001-26042)
| 01***45 | Bolt,(S6d155-4b) | 4 |
| 01***60 | Bolt,(Without Alternator Bracket) | 4 |
| 01***25 | Bolt,(For Slag Handling) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Blade Tilt Cylinder(#26043-)
| 01***45 | Screw | 4 |
| 01***60 | Bolt,(For Japan And Sweden) | 4 |
| 01***25 | Bolt,(For Rubber Shoe) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Control Lever Bracket And Valve Seat : Unit_01_of_02
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 5 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 8 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Control Lever Bracket And Valve Seat : Unit_02_of_02
| 01***20 | Bolt,(With Auto Emergency Steering) | 5 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Hydraulic Filter
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 07***10 | O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010 | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Hydraulic Piping (Tank To Lift Cylinder) (1/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 8 |
| 01***75 | Bolt, Tube Mounting | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Hydraulic Piping (Tank To Lift Cylinder) (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Hydraulic Piping (Tank To Pump)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***75 | Bolt,(For Adjusting) | 4 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 6 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Hydraulic Piping (Tank To Tilt Cylinder) (1/2)
| 01***65 | Bolt,(Except Japan) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Hydraulic Piping (Tank To Tilt Cylinder) (2/2)
| 01***30 | Bolt,Radio Controlled Slag Handling | 1 |
| 01***40 | Bolt,(Dust And Dirt Protection) | 1 |
| 01***55 | Bolt,(For France Noise Suppression) | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Hydraulic Pump (Except Japan)
| 01***42 | Washer,Spring (For Pedal Steering), Washer-Spring | 16 |
| 04***12 | Pin,Spring | 2 |
| 04***20 | Ring, Snap | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Hydraulic Tank (1/2)
| 01***30 | Bolt,(Cold Terrain Spec.) | 6 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 41 |
| 01***30 | Bolt,(For Center Guard) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Hydraulic Tank (2/2)
| 01***25 | Bolt,(Without Auto Priming System) | 1 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 2 |
| 01***40 | Bolt,(Dust And Dirt Protection) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Lift And Ripper Control Linkage
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***50 | Bolt (Kit) | 1 |
| 01***10 | Bolt, Fan Mounting | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Lift Control Servo Valve
| 01***16 | Bolt,(For Slag Handling) | 1 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 6 |
| 01***25 | Bolt,(Without Auto Priming System) | 4 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Ripper Control Lever
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***35 | Bolt,(For Position Fixing) | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Ripper Control Valve (1/2)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***95 | Bolt,(For Reversible Fan) | 1 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Ripper Control Valve (2/2)
| 07***34 | O-Ring,(F2310-59a0 -4 ) | 2 |
| 07***34 | O-Ring,See Fig. K4010-65a0 | 2 |
| 07***12 | Plug,Oil Filler | 1 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Servo Valve Piping
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 3 |
| 01***45 | Bolt,(For Suction? Reversible Fan) | 3 |
| 01***25 | Bolt - Rear Guard Mounting | 2 |
Komatsu : D80a-18(S/N 25001-Up) : Work Equipment Control System : Tilt Control Linkage
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***60 | Bolt (M10-1.50x60) | 3 |
| 01***07 | Nut? L.H. Thread | 1 |
D80A-18(S/N 25001-UP) serial number reference
The PIN plate is located on the front frame casting, typically on the operator's left side near the radiator support. On larger dozers, it may also appear on the inside of the cab door pillar. Read the prefix as the model code (e.g., D80A-18) followed by the serial number (25001 and up).
| Prefix | Identifies | Notes |
|---|---|---|
| D80A-18 | Standard | Serial range 25001-UP. Generation dash-8. Configuration: Standard. Steering: Hydrostatic. Region: General export/domestic. Years: Dash-8 generation (approx. 2007–2013). Source: published references catalog listing, published references shop manual spec sheet. |
| D85A-18 | Standard | Serial range 25001-UP. Generation dash-8. Configuration: Standard. Steering: Hydrostatic. Region: General export/domestic. Years: Dash-8 generation (approx. 2007–2013). Source: published references shop manual spec sheet. |
| D80E-18 | Standard | Serial range 25001-UP. Generation dash-8. Configuration: Standard. Steering: Hydrostatic. Region: General export/domestic. Years: Dash-8 generation (approx. 2007–2013). Source: published references shop manual spec sheet. |
| D85E-18 | Standard | Serial range 25001-UP. Generation dash-8. Configuration: Standard. Steering: Hydrostatic. Region: General export/domestic. Years: Dash-8 generation (approx. 2007–2013). Source: published references shop manual spec sheet. |
Frequently asked questions
What engine does the Komatsu D80A-18 use?
The Komatsu D80A-18 uses a 6-cylinder NT-855 engine with 220 hp gross power and 855 cu in displacement.
What is the operating weight of the Komatsu D80A-18?
The operating weight is 51,390 lb (23,310 kg).
What model replaced the Komatsu D80A-18?
The D80A-18 was succeeded by the D80E-18 and D80P-18 series, which feature updated emissions systems and engine management while retaining the same chassis and powertrain architecture.
What D80A-18(S/N 25001-UP) owners discuss
What engine powers the Komatsu D80A-18 (S/N 25001-UP), and what are its key performance specifications?
The Komatsu D80A-18 (S/N 25001-UP) uses a Cummins NT-855 engine. It produces 220 hp (164 kW) gross power at 1800 rpm with a maximum torque of 759 lbs ft (1,029 nm). The engine has 6 cylinders and a displacement of 855 cu in (14,011 cu cm). The cooling system holds 21 gal (79 l) of fluid, and the fuel tank capacity is 119 gal (450 l). Note: The D80A-12 variant uses a different engine with 180 hp gross power; do not mix these specifications.
What are the typical undercarriage wear patterns and specifications for the D80A-18?
The D80A-18 features a track gauge of 6.6 ft (2 m) and standard shoe size of 22 in (56 cm). It has 38 shoes per side, 6 track rollers per side, and 2 carrier rollers per side. Ground pressure is approximately 8.7 psi. Undercarriage wear typically manifests as track chain elongation and roller/bushing wear. The track pitch is 9 in (22 cm). Operators should monitor track tension to prevent excessive wear on the idler and sprocket.
How does the D80A-18 powertrain and transmission behave, and what are its speed limits?
The machine uses a DD (Direct Drive) transmission with 5 forward gears and 4 reverse gears. Maximum forward speed is 5 mph (8 kph), and maximum reverse speed is 5.6 mph (9 kph). The powertrain is designed for heavy earthmoving; operators report smooth power delivery but note that hydraulic pump wear can correlate with engine stress. If a hydraulic pump fails, the engine may be at risk due to the high load. The transmission is robust but requires regular fluid checks to prevent gear wear.
What are common hydraulic system issues and maintenance requirements for this model?
Common hydraulic issues include slow functions when hot, indicating internal leakage in pumps or valves as viscosity drops. The hydraulic system requires Komatsu EO or equivalent high-quality hydraulic oil. Filters must be changed at recommended intervals to prevent contamination. Operators should check for leaks in hydraulic lines and cylinders, especially around the main control valve. Weak performance in cold conditions may indicate air ingress or low fluid levels. The cooling system for the hydraulic oil must be kept clean to prevent overheating.
What electrical or sensor quirks are associated with the D80A-18 series?
The D80A-18 relies on electronic control systems for monitoring and safety. Common issues include intermittent starting, dashboard failures, or random shutdowns due to faulty sensors or unstable power supplies. Grounding issues can cause multiple fault codes. Operators should check battery terminals, engine/chassis grounds, and main starter cables if starting problems occur. Sensor malfunctions can trigger false warnings; verify sensor connections and wiring harness integrity before replacing components.
What is the operating weight and blade capacity of the D80A-18?
The operating weight of the D80A-18 is 51,390 lbs (23,310 kg). The standard blade has a capacity of 9 cu yd (6 cu m), with a height of 52 in (132 cm) and a width of 13 ft (4 m). The machine length with the blade is 22 ft (7 m), and without the blade, it is 16 ft (5 m). The height to the top of the cab is 9.8 ft (3 m). Width over tracks is 9.8 ft (3 m). Ground clearance is 0 ft (0 m). Note: Weights and dimensions can vary by configuration and attachment package.
What to check when buying a used D80A-18 (S/N 25001-UP)?
Verify the serial number is 25001 and up to ensure correct manual and parts application. Check the engine for oil burning and coolant leaks. Inspect the undercarriage for wear on shoes, rollers, and idlers. Test all hydraulic functions for speed and strength, both cold and hot. Check for electrical faults, intermittent dashboard warnings, and starting issues. Ensure the transmission shifts smoothly through all gears. Verify the condition of the cooling package (radiator, oil cooler) for blockages. Have your dealer verify the engine and hydraulic pump condition before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific D80A-18(S/N 25001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.