Komatsubulldozermedium (d40 - d75)
Komatsu D65EX-15(S/N 67001-UP (Landfill Spec.))
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu D65EX-15 (S/N 67001-UP, Landfill Spec.) is a mid-size crawler dozer in Komatsu's D65 class, built during the "Galeo" generation of Komatsu dozers. This serial range runs the Komatsu SAA6D114E-3 engine, a turbocharged, aftercooled inline-six displacing 8.27 liters and rated at roughly 155 kW (208 HP) gross at 1950 rpm, meeting Tier 3/Stage IIIA emission rules. Operating weight runs about 20,280 kg (44,710 lb), varying slightly with blade and undercarriage choice. The D65-15 Galeo generation followed the D65EX-12/D65PX-12 line built through the early 2000s, and was itself followed by the D65EX-16, then D65EX-17, leading to today's Tier 4 Final D65EX-18 and intelligent Machine Control D65EXi-18. The platform was offered in EX (standard track), PX (wide, low ground pressure), and WX (extra-wide swamp) undercarriage widths, with straight-tilt, Semi-U, and power-angle-tilt (PAT) blade choices plus single- or multi-shank ripper attachments; the 67001-UP range covered here carries the factory Landfill Spec. configuration built for refuse and waste-handling duty rather than general earthmoving.
Within the Galeo generation, Komatsu moved this dozer class to electronically managed, Tier 3 diesel power and updated cab and control ergonomics, a step up from the mechanically governed engines and simpler controls of the D65-12 line it replaced. The Landfill Spec. trim on the 67001-UP range built in factory guarding and cooling protection suited to refuse debris, ash, and the corrosive gas exposure typical of landfill sites, work that standard earthmoving trim was not set up for. These Galeo-era D65-15 dozers are no longer in production, but plenty remain active in refuse, landfill cover, and waste-transfer fleets because their mechanical fuel systems and simpler emissions controls are cheaper to keep running than later Tier 4 machines with exhaust aftertreatment. That keeps steady demand for used units and for parts crossover with the related D65PX-15 and D65WX-15 variants in the same shop and parts manual family.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu D65EX-15(S/N 67001-UP (Landfill Spec.)) specifications
Engine
| Engine model | Komatsu SAA6D114E-3, 4-cycle, water-cooled, direct injection (later production common-rail), turbocharged, air-to-air aftercooled |
| Emissions certification | EPA Tier 3 and EU Stage IIIA certified |
| Cylinders / bore x stroke | 6 cylinders, 114 mm x 135 mm (4.49 in x 5.31 in) |
| Displacement | 8.27 L (505 cu in) |
| Gross power (SAE J1995 / ISO 14396) | 155 kW / 207-208 HP @ 1,950 rpm |
| Net power (ISO 9249 / SAE J1349) | 153 kW / 205 HP @ 1,950 rpm |
| Net power, hydraulic fan at max speed | 142 kW / 190 HP |
| Governor | All-speed, electronic |
| Note on engine identity | This is the engine documented for the standard D65EX-15 (S/N 67001-UP) production run. No source ties a different base engine specifically to the Landfill Spec parts-book variant; core powertrain is shared across the 67001-UP serial break. |
Weights
| Tractor weight, bare (no dozer, EX standard track) | 17,270 kg (38,070 lb) — includes rated lubricant, hydraulic control unit, coolant, full fuel tank, operator, standard equipment |
| Operating weight, Semi-U Tilt dozer (standard EX config) | 20,280 kg (44,710 lb) |
| Operating weight, EX Long Track undercarriage option | 21,020 kg (46,300 lb) |
| Operating weight basis | Includes dozer, steel cab, ROPS, operator, standard equipment, rated lubricant/coolant, full fuel tank |
| ROPS canopy added weight | 390 kg (860 lb) |
| Cab (enclosed, pressurized) added weight | 410 kg (910 lb) |
| ROPS for cab added weight | 240 kg (530 lb) |
Dimensions
| Overall length with Semi-U dozer | 5,440 mm (17'10") |
| Track gauge | 1,880 mm (6'2") |
| Overall height (cab top) | 3,220 mm (10'7") |
| Overall width (over track frame, standard shoe) | 2,990 mm (9'10") |
| Length of track on ground | 2,675 mm (8'9"); EX Long Track: 3,285 mm (10'9") |
| Ground clearance | 405 mm (1'4"); some secondary listings round to 1.33-1.40 ft — treat as the same figure |
| Standard track shoe width | 510 mm (20.1") |
| Grouser height | 65 mm (2.6") |
| Minimum turning radius (counter-rotation) | Standard track: 1.8 m (5'11"); EX Long Track: 2.0 m (6'7") |
Performance
| Travel speed 1st gear | Forward 3.3 km/h (2.1 mph); Reverse 4.4 km/h (2.8 mph) |
| Travel speed 2nd gear | Forward 6.3 km/h (3.9 mph); Reverse 8.2 km/h (5.1 mph) |
| Travel speed 3rd gear | Forward 10.1 km/h (6.3 mph); Reverse 12.9 km/h (8.1 mph) |
| Drawbar pull | Published as a drawbar-pull-vs-speed curve per gear (F1/F2/F3), not a single peak figure. Maximum usable pull depends on traction and total machine weight including mounted equipment — not a fixed spec number. |
| Ground pressure, bare tractor | 62.1 kPa / 0.63 kg/cm2 (9.0 psi) |
| Ground pressure, with Semi-U Tilt dozer (operating weight) | 72.9 kPa / 0.74 kg/cm2 (10.57 psi) |
| Ground pressure, with Straight Tilt dozer | 71.9 kPa / 0.73 kg/cm2 (10.43 psi) |
| Ground pressure, with Straight Angle dozer | 72.6 kPa / 0.74 kg/cm2 (10.53 psi) |
| Gradeability | Not published in Komatsu literature for this model — not stated as a standalone spec figure; performance is instead expressed via the drawbar-pull curve |
| Hydraulic pump flow (main) | 210 L/min (55.5 US gal/min) at rated engine rpm |
| Hydraulic relief valve setting | 20.6 MPa / 210 kg/cm2 (2,990 psi) |
| Steering system | Hydrostatic Steering System (HSS), independent hydraulic pump, counter-rotation capable |
| Exterior noise level (LwA) | 108 dB(A) per 2000/14/EC |
| Operator ear noise level (LpA) | 80 dB(A) per ISO 6396 dynamic test |
Blades
| Semi-U Tilt dozer capacity | 5.61 m3 (7.34 yd3), width x height 3,460 x 1,425 mm (11'4" x 4'8") |
| Straight Tilt dozer capacity | 3.89 m3 (5.09 yd3), width x height 3,415 x 1,225 mm (11'2" x 4'0") |
| Straight Angle dozer capacity | 3.55 m3 (4.64 yd3), width x height 3,970 x 1,100 mm (13'0" x 3'7") |
| Short Semi-U Tilt dozer (EX Long Track option) | 5.25 m3, width x height 2,990 x 1,480 mm |
| Max lift above ground / max drop below ground (Semi-U and Straight Tilt) | Lift 1,105 mm (3'8"); drop 440 mm (1'5") |
| Max lift / drop (Straight Angle) | Lift 1,185 mm (3'11"); drop 450 mm (1'6") |
| Max tilt adjustment | Semi-U 855 mm (2'10"); Straight Tilt 870 mm (2'10"); Straight Angle 400 mm (1'4") |
| Blade rating basis | Capacities rated per SAE recommended practice J1265 |
| Blade material | High-tensile-strength steel front and sides for durability, box blade design |
Service Capacities
| Fuel tank | 415 L (109.6 US gal) |
| Coolant | 37 L (9.8 US gal) |
| Engine oil | 28 L (7.4 US gal) |
| Torque converter, transmission, bevel gear and steering system | 48 L (12.7 US gal) |
| Final drive, each side (EX) | 24 L (6.3 US gal) |
| Dozer blade hydraulic system (refill) | 55 L (14.5 US gal); includes additional capacity when optional ripper is fitted |
| Ripper equipment additional hydraulic volume (multi-shank) | 7 L (1.8 US gal), where fitted as a separate ripper circuit |
Configuration & Options
| Landfill Spec designation | S/N 67001-UP (Landfill Spec.) is a factory parts-book variant of the standard D65EX-15 for waste/landfill duty. Core engine, weights, dimensions, blade and performance data match the standard D65EX-15 documented for this serial break; a distinct published spec sheet for the Landfill Spec configuration itself was not found — treat base-machine figures as the reference and confirm any landfill-specific guarding or equipment differences with a dealer. |
| Typical landfill-duty equipment (general Komatsu practice, not confirmed model-specific) | Waste-duty dozer packages commonly add belly/undercarriage guards, striker bars, radiator/debris screens and extra sealing against material intrusion. The base D65EX-15 already includes a hydraulic-driven reversible cooling fan as standard. |
| Track shoe options | Standard single-grouser 510 mm (20"); optional 560 mm, 610 mm (24"), 660 mm (26"); extreme-service shoes available (all models except D65PX) |
| Blade options available | Semi-U Tilt, Straight Tilt, and Straight Angle dozer blades offered for D65EX-15; Short Semi-U Tilt offered on EX Long Track undercarriage |
| Undercarriage arrangement options | Standard EX arrangement or EX Long Track arrangement (longer track-on-ground, forward-shifted idler) for improved balance and grading performance |
| Cab options | ROPS canopy, enclosed pressurized cab (hexagonal SpaceCab), or ROPS-for-cab, each FOPS Level 2 rated; air conditioning optional |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
D65EX-15(S/N 67001-UP (Landfill Spec.)) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 28 L (7.4 US gal) | Komatsu EO diesel engine oil, low-ash CK4-class 15W40 for general/warm service, or 10W30 for cold-start service, matched to the SAA6D114E-3 turbocharged, aftercooled engine (Tier 3/Stage IIIA) fitted to this serial range. Select viscosity grade for the expected ambient temperature range per the Komatsu genuine-oil viscosity guide. |
| Cooling system | 37 L (9.8 US gal) | Komatsu Supercoolant, pre-mixed antifreeze/coolant type. Corrosion resistor/coolant additive maintained per the OMM's periodic checks. |
| Fuel tank | 415 L (109.6 US gal) | Diesel fuel meeting the engine maker's specification; use of a water separator (standard equipment) is called out for this machine. |
| Transmission/powertrain (Torqflow transmission, bevel gear, and steering system combined) | 48 L (12.7 US gal) | Komatsu TO powertrain oil, grade selected by ambient temperature (TO10 for cold conditions, TO30 for warm conditions). Covers the water-cooled 3-element torque converter, planetary power-shift transmission (3F/3R, electronically modulated), bevel gear set, and Hydrostatic Steering System (HSS) compartment, which share a common oil supply and filtration circuit on this model. |
| Final drive (each side) | 24 L (6.3 US gal) per side for the EX (standard/long track) configuration | Komatsu TO powertrain oil, same grade family as the transmission fill (TO10/TO30 by climate). Double-reduction spur-and-planetary final drive with bolt-on segmented sprocket rim; PX/WX track-frame variants of this platform take 27 L (7.1 US gal) per side, so confirm configuration before fill. |
| Hydraulic system/tank | 55 L (14.5 US gal) refill, same figure for straight-tilt or semi-U tilt dozer control set-up; add 7 L (1.8 US gal) if multi-shank ripper hydraulics are fitted | Komatsu HO hydraulic oil, ISO-46 grade for normal climates (HO46) or a lighter ISO-32/HO56-type oil in cold climates. Closed-center load-sensing hydraulic system, hydraulic-driven reversible cooling fan runs off the same oil supply. |
| Pivot shaft | Not published as a separate refill figure in the OMM's coolant-and-lubricant table | Grease-lubricated pivot shaft/oscillating equalizer bar joint; service with Komatsu multi-purpose grease through the grease fitting on the recommended interval, same product used for track adjuster and roller/idler grease points. |
| Grease (all points) | Per-point service, not a bulk refill figure | Komatsu G2Li multi-purpose grease (lithium-complex type), the genuine grease specified across track pins/idlers, pivot shaft, and other chassis grease fittings on this dozer. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu D65EX-15(S/N 67001-UP (Landfill Spec.)) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the D65EX-15(S/N 67001-UP (Landfill Spec.)) beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull engine oil samples from the SAA6D114E-3 at every scheduled oil change; landfill duty accelerates soot and abrasive loading versus general earthmoving. Sample power train and final drive oil given debris ingestion risk around seals. Watch hydraulic oil condition closely since fine ash and dust can bypass a saturated tank breather element. Track coolant condition and corrosion resistor cartridge life given corrosive landfill gas exposure, and check fuel water separator bowls often since fine refuse dust and moisture accelerate injector wear on this engine.
Corrective & Common Repairs
Expect track shoe bolts to work loose faster than normal from repeated debris packing in the frame; check torque at the standard interval. Turbocharger mounting bolts are a listed 1000-hour check item on this engine for the same reason. Radiator and hydraulic cooler fins clog quickly with ash and fine debris, cutting cooling capacity. Air cleaner elements need attention well ahead of the standard interval in dusty landfill cover material, and cutting edges and end bits wear faster from continuous refuse pushing.
Overhaul & Rebuild Points
Power train and final drive case oil and strainer service at 1000 hours is an early warning point for this dozer; rising metal content signals a coming rebuild. Turbocharger rotor play, checked periodically by the distributor, marks the threshold for a turbo rebuild rather than continued running. Track roller, idler, and carrier roller bushings and pins wear faster than average in landfill material and should be measured, not eyeballed. Engine valve clearance work at 2000 hours and damper/pivot bearing service are useful markers of power train life on this SAA6D114E-3 platform.
Seasonal & Environment Servicing
Landfill leachate and methane exposure corrodes electrical connectors, battery terminals, and grounding points faster than a normal earthmoving site; inspect and protect these more often than the standard chart calls for. Clean radiator and hydraulic cooler fins on a shorter cycle, since wind-blown debris and ash build up quickly. In cold-region landfill work, plan fuel and engine warm-up steps suited to the SAA6D114E-3 before startup. Watch the air cleaner dust indicator closely year-round; fine cover soil and refuse dust load the element faster than typical construction dust.
D65EX-15(S/N 67001-UP (Landfill Spec.)) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 09637-01163 | Plate? Instruction,Air Cleaner (Double Element) | Air intake service | Check fitment → |
| 09637-30163 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 09637-30263 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
| 07063-01054 | Element, Hydraulic Tank Filter | Scheduled service item | Check fitment → |
| 14X-60-31150 | Element | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
D65EX-15(S/N 67001-UP (Landfill Spec.)) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E03 | Action (severity) code shown with an alphanumeric failure code on the monitor. E03 is the most serious level; E02 is mid-level; E01 is least serious. | Not a fault by itself - a specific circuit or component (transmission clutch, common rail, sensor, etc.) has reached stop-and-call severity. | Stop the machine safely, read the alphanumeric failure code shown with E03, and troubleshoot that specific code before restarting. |
| 1500L0 | Transmission clutch dual engagement - the transmission controller has detected two transmission clutches engaged at the same time. | Sticking or stuck clutch modulation valve spool, a wiring short energizing two clutch solenoids simultaneously, or a transmission controller output fault. | Stop the machine, inspect the clutch control valve wiring for shorts between circuits, check modulation valve spools for sticking, and follow the CALL E03 troubleshooting steps for the specific clutch combination flagged. |
| 15SAL1 | Forward clutch fill/pressure feedback signal is ON while the controller's command current is OFF (fill-high mismatch). | Stuck fill valve, shorted wiring, or a fill switch/sensor not matching the commanded state. | Inspect the forward clutch modulation solenoid and its wiring for a short, then verify fill switch operation. |
| 15SALH | Forward clutch fill/pressure feedback signal is OFF while the controller's command current is ON (fill-low mismatch). | Open circuit or a stuck-closed valve preventing clutch fill, or low transmission hydraulic pressure. | Check the forward clutch solenoid harness for an open circuit and verify transmission hydraulic pressure. |
| AD00L2 | Common rail fuel system defective/abnormal function. | Rail pressure control deviation, a faulty pressure limiter, or a fuel supply pump metering issue. | Check rail pressure sensor readings and fuel supply pump operation before condemning injectors or the rail. |
| AD11KA | Fuel supply pump metering (suction control) solenoid: wiring disconnection. | Open circuit or a bad connector at the fuel supply pump solenoid. | Inspect the wiring harness and connector at the fuel supply pump solenoid for an open circuit or corrosion. |
| DGE2KX | Engine coolant (water) temperature sensor: input signal out of normal range. | Failed sensor or a wiring short/open causing an implausible voltage reading. | Check the sensor connector and wiring, test sensor resistance against spec, and replace the sensor if out of range. |
| DH40KX | Common rail pressure sensor: input signal out of normal range. | Faulty rail pressure sensor or a wiring fault producing an implausible signal. | Inspect sensor wiring and connector, test sensor output, and replace the sensor if faulty. |
| DK30KA | Steering lever potentiometer 1: wiring disconnection. | Open circuit in the steering potentiometer harness or connector. | Check the steering lever potentiometer connector and harness continuity. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
D65EX-15(S/N 67001-UP (Landfill Spec.)) attachments & work tools
Blades
This chassis family (D65EX/PX/WX-15) ran three dozer-blade families: semi-U tilt on the EX (about 3720 mm / 146 in wide, roughly 5.6 m3 / 7.3 cu yd capacity), straight-tilt on the PX (around 3.9 m3 / 4.8 cu yd), and a straight-angle blade on the WX that pins to a U-frame at three points so angle and tilt change mechanically for ditching work. Komatsu's power-angle-tilt option on this range is badged PAT, not VPAT (VPAT is a competitor term); the WX-15 PAT variant carries roughly 4.4 m3 / 5.75 cu yd capacity. Blade lift uses twin 95 mm cylinders and tilt a single 140 mm cylinder across these configurations.
Rippers
Standard ripper for this class is a three-shank parallelogram unit, around 1,680 kg (3,700 lb) complete with hydraulic control valve, beam length near 2,170 mm, roughly 640 mm lift above ground and 595 mm penetration depth. The shank count is adjustable in the field (shanks can be pulled to run a single-shank giant configuration for harder digging), rather than being sold as a wholly separate single-shank frame as on larger dozer classes; ripper lift uses a single 140 mm cylinder.
Winches
Komatsu did not catalog an OEM cable winch for this generation of D65; drawbar-mounted winches seen on these dozers (Carco-type PTO or hydraulic units in this size class) are aftermarket add-ons fitted through the rear drawbar/PTO provision rather than a factory option line. PTO drive was still commonly available on dozers this size through the mid-2000s, which is what supports aftermarket PTO winch fitment; confirm PTO/winch provision against the specific unit before ordering brackets.
Drawbars/counterweights
A rear drawbar is fitted as standard for towing/pull applications on this class, mounted at the trailing edge of the rear frame below the ripper. Landfill/waste-duty dozers in the wider Komatsu D65 range are commonly ballasted with added rear counterweight to offset front-end guarding and to hold trim with a full ripper or reduced blade, but a specific factory counterweight mass tied to this exact serial-range Landfill Spec build is not documented in available factory literature — verify with your dealer or the parts book for this serial range.
Cab/ROPS guarding
The cab on this range is a certified ROPS/FOPS structure; landfill- and forestry-duty machines in Komatsu's dozer lineup typically add heavier screening over the radiator and cab glass, a raised or relocated air intake with precleaner, sheet-metal deflector/striker bars ahead of the tracks to shed debris, and perimeter seals or overlap guards around engine-compartment doors to cut debris intrusion. These are the general waste/forestry guarding elements Komatsu applies across its dozer range; the exact guard-group content specific to this Landfill Spec parts book (S/N 67001-UP) should be checked against that catalog's guard-group section, since some of the richest documented detail on this style of package comes from later/other Komatsu dozer generations and should not be assumed identical here.
Hydraulics (front/rear tools)
Blade services (lift, tilt, and angle where fitted) run off the machine's main implement pump circuit with dedicated cylinders per function (twin lift cylinders, single tilt cylinder as noted above); the rear ripper adds its own lift cylinder and control valve fed from the same hydraulic system, operated by a separate ripper lever in the cab. No auxiliary high-flow circuit is documented for this range beyond the blade and ripper services, so any additional rear tool (winch, etc.) fitted aftermarket typically taps the ripper valve or runs its own PTO/hydraulic pack rather than a factory-provided third circuit.
All D65EX-15(S/N 67001-UP (Landfill Spec.)) assemblies by section
Every catalogued assembly group for the Komatsu D65EX-15(S/N 67001-UP (Landfill Spec.)). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Accessory
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Accessory : Cap And Overall
| 09***50 | Overall,(Special Order) | 1 |
| 09***57 | Cap,(Special Order) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Accessory : Spare Parts
| 07***95 | O-Ring (Kit) | 1 |
| 07***10 | O-Ring,(F4320-67a0 -4 ) | 1 |
| 07***54 | Element, Hydraulic Tank Filter | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Accessory : Tool
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***17 | Nozzle | 1 |
Cooling System
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Cooling System : Cooling (Fan Motor Piping) (For Landfill)
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Cooling System : Cooling (Fun Guard) (Landfill Spec)
| 01***30 | Bolt,(With Body Positioner) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 14***20 | Guard | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Cooling System : Cooling (Guard And Mount)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Cooling System : Cooling (Radiator And Oil Cooler)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 07***20 | Tube,Vynyl | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Cooling System : Cooling (Shroud And Fan Motor) (For Landfill)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Cooling System : Cooling (Washer Tank)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Electrical System
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Additional Rear Lamp
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 04***10 | Clip,(With Accumulator) | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Back-Up Alarm
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 14***30 | Harness, Wiring | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Front And Rear Work Lamp (Additional)
| 01***25 | Bolt,(Without Gps Antenna Bracket) | 6 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 1 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Komtrax Less Wiring
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Komtrax Less Wiring (Angle Sennsor)
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Komtrax Wiring (Angle Sensor)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 3 |
| 01***35 | Screw | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Vehicle Lamp (For Perforated Double Mask)
| 01***12 | Bolt - M8 - 1.25 X 12 | 2 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Vehicle Wiring
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 10 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Vehicle Wiring (Engine And T/M Wiring Clamp)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Electrical System : Vehicle Wiring (Rear Wiring Clamp)
Engine Related Parts
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Engine Related Parts : Air Cleaner Cap (For Pre-Cleaner)
| 56***00 | Cap,(With Weather Cap Type) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Engine Related Parts : Caution Plate
| 09***63 | Plate? Instruction,Air Cleaner (Double Element) | 1 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Engine Related Parts : Damper
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 20 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Engine Related Parts : Engine Mount
| 01***35 | Bolt,(With Rops) | 2 |
| 01***45 | Bolt,(For 60ton Dump Body) | 10 |
| 01***80 | Capscrew (2) | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Engine Related Parts : Engine Wiring
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 08***50 | Cable | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Engine Related Parts : Exhaust Pipe (Elbow Type)
| 01***85 | Bolt | 1 |
| 01***10 | Nut - M12 | 2 |
| 01***23 | Washer | 1 |
Fuel Tank And Related Parts
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Fuel Tank And Related Parts : Additional Fuel Strainer
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
| 02***A4 | Hose | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Fuel Tank And Related Parts : Fuel Line
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Fuel Tank And Related Parts : Fuel Tank
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***75 | Capscrew | 4 |
| 01***80 | Screw | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Fuel Tank And Related Parts : Fuel Tank (Lamp Wiring)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 16 |
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
| 04***10 | Clip,(With Accumulator) | 12 |
Guard
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Engine Side Cover (Lower)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Engine Side Cover (Lower) (For Poor Fuel)(#67001-67013)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Engine Side Cover (Window Washer Tank) (For Cab)(#67001-67918)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Engine Side Cover (Window Washer Tank) (For Cab)(#67919-)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 5 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Additional Fuel Strainer And Battery Wiring) (Landfill Spec.)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 11 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Bracket Mounting)
| 01***25 | Bolt | 8 |
| 14***10 | Bolt | 4 |
| 14***70 | Spacer | 12 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Cover)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Filter)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 7 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Handle)
| 01***35 | Bolt | 3 |
| 01***45 | Bolt | 3 |
| 01***32 | Washer | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Hood Mounting)
| 01***55 | Bolt - Mount Cage To Transmission Case | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Hood)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***75 | Bolt - Tube Mounting | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Hydraulic Control Valve)
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Capscrew - M14 (1)/(2) | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Hydraulic Pump Line)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Hydraulic Tank)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***50 | Bolt,(For D60pl) | 4 |
| 01***16 | Screw | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (P.P.C Line)
| 01***75 | Bolt (M10-1.50x75) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 02***1D | Union | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Rear Guard And Filter Mounting) (Landfill Spec.)(#67001-67701)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Rear Guard And Filter Mounting) (Landfill Spec.)(#67702-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Rear Guard And Filter Mounting)(#67001-67701)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Rear Guard And Filter Mounting)(#67702-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender (Rops Bracket) (Landfill Spec.)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 8 |
| 01***60 | Capscrew | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender Cover (Filter And Battery Cover) (With Handrail) (Landfill Spec.)
| 01***12 | Bolt - Front Cover Mounting | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***16 | Screw | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Fender Cover (Filter Cover Mounting) (With Handrail)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Front Guard (Engine Hood) (Landfill Spec.)
| 01***25 | Bolt | 7 |
| 01***30 | Bolt | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Front Guard (Engine Side Cover) (Landfill Spec.)
| 01***45 | Bolt,(With Water Separator Type) | 16 |
| 01***12 | Washer,(With Body Positioner) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Front Guard (Rear Support And Radiator Cover) (Landfill Spec.)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Front Hook
| 01***55 | Bolt,(Without Rops) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 14***20 | Hook,(With Hook) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Lift Cylinder Support
| 01***70 | Bolt,(With Wear Guard) | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Radiator Mask (For Trimming Dozer) (Landfill Spec.)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***25 | Bolt, Pinlock | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Rear Cover
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Rear Cover (For Ripper)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Under Guard (Hinge Type)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 15 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Guard : Under Guard (Reinforced Type)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 13 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Hydraulic System
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Hydraulic Pump (Mount)
| 01***40 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***55 | Bolt,(Without Rops) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Hydraulic Pump Line (Drain Block)
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 02***28 | Elbow | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Hydraulic Pump Line (Fan Motor Line) (Landfill Spec.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Hydraulic Pump Line (Fan Pump)
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Hydraulic Pump Line (Filter Return And Load Sensing)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Hydraulic Pump Line (H.S.S. Motor Line)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Hydraulic Pump Line (Reducing Valve)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Hydraulic Pump Line (Suction And Delivery)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Lift Cylinder Line
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***40 | Screw, Hex Socket | 4 |
| 01***55 | Screw | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Lift Cylinder Line (Regulator Valve)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Lift Cylinder Line (Valve)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Rear Hydraulic Line (Ripper Bracket)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 3 |
| 01***75 | Capscrew | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Rear Hydraulic Line (Ripper Piping)
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Steering Line
| 02***10 | Elbow | 1 |
| 02***08 | O-Ring (Kit) | 1 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Tilt Line (Tilt Valve Side)
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Hydraulic System : Tilt Line (Track Frame Side)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***65 | Bolt,(Used With Pin Puller) | 5 |
| 01***40 | Bolt | 2 |
Main Frame And Related Parts
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Main Frame And Related Parts : Equalizer Bar And Pivot Shaft
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 6 |
| 01***55 | Bolt,(Without Rops) | 16 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Main Frame And Related Parts : Main Frame (Landfill Spec.)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Marks And Plates
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Marks And Plates : Gravity Marks(#67001-67779)
| 13***10 | Plate,Slinging Position | 1 |
| 21***50 | Plate? Mark,Location Of Center Of Gravity | 4 |
| 21***60 | Plate? Mark,Location Of Center Of Gravity | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Marks And Plates : Gravity Marks(#67780-)
| 09***11 | Mark Plate,Hanging Point Mark | 2 |
| 09***01 | Mark,Location Of Center Of Gravity | 4 |
| 09***02 | Mark,Lift Point Mark | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Marks And Plates : Marks And Plates (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Marks And Plates : Marks And Plates (English) (For Angle Dozer)(#67001-67743)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Marks And Plates : Marks And Plates (English) (For Angle Dozer)(#67744-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Marks And Plates : Marks And Plates (English)(#67001-67743)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***41 | Plate? Safety,Warning Before Ope.And Mainte | 1 |
| 09***81 | Plate? Safety,Hot Oil Hazard? Hydraulic. Tank Cap | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Marks And Plates : Rops Plates (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Name | 1 |
Operator'S Compartment And Control System
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Air Conditioner (Compressor Mount And Pulley Cover)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 1 |
| 01***90 | Bolt,With Cover | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Air Conditioner (Compressor)(#67001-68016)
| 42***10 | Compressor | 1 |
| ND***70 | Clamp, Tapping | 1 |
| ND***40 | Compressor Assembly | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Air Conditioner (Compressor)(#68017-)
| 14***80 | Compressor Ass'Y | 1 |
| ND***70 | Clamp, Tapping | 1 |
| ND***60 | Cover,Dust | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Air Conditioner (Condenser) (Landfill Spec.)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***12 | Plug,(With Canvas Or Rops Canopy) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Air Conditioner (Filter Ass'Y)
| 09***03 | Hose,Air | 1 |
| 14***30 | Filter Ass'Y | 1 |
| 14***70 | Clamp | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Air Conditioner (Heater Line Bracket)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***20 | Screw | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Air Conditioner (Heater Line)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***75 | Bolt | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Air Conditioner (Piping Bracket) (Landfill Spec.)
| 01***25 | Capscrew | 2 |
| 01***30 | Screw | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Air Conditioner Unit
| 17***10 | Unit | 1 |
| ND***80 | Bracket | 1 |
| ND***61 | Bolt | 7 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Arm Rest Cover (For Ripper) (With Cab)(#67001-67458)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***16 | Screw | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Arm Rest Cover (For Ripper) (With Cab)(#67459-67979)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***16 | Screw | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Arm Rest Cover (For Ripper) (With Cab)(#67980-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***16 | Screw | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Arm Rest Cover (With Cab)(#67001-67458)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Arm Rest Cover (With Cab)(#67459-67979)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Arm Rest Cover (With Cab)(#67980-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Blower (For Air Conditioner)
| 17***20 | Blower Ass'Y | 1 |
| ND***20 | Screw | 3 |
| ND***82 | Case | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (Decal)
| 15***40 | Plate,Breaker | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner And Box) (1/2) (For Heater)(#67001-68070)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***16 | Screw, Machine | 7 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner And Box) (1/2) (For Heater)(#68071-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***16 | Screw, Machine | 7 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner And Box) (1/2)(#67001-68070)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***16 | Screw, Machine | 7 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner And Box) (1/2)(#68071-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***16 | Screw, Machine | 7 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner And Box) (2/2)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 9 |
| 01***16 | Screw | 7 |
| 01***07 | Nut,Lock | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner Box And Panel) (1/4)(#67001-67113)
| 01***16 | Screw | 14 |
| 01***08 | Screw | 6 |
| 01***23 | Washer,(Without Air Con.) | 14 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner Box And Panel) (1/4)(#67114-)
| 01***16 | Screw | 10 |
| 01***20 | Screw | 4 |
| 01***08 | Screw | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner Box And Panel) (2/4)
| 01***12 | Screw | 4 |
| 01***16 | Screw | 4 |
| 01***23 | Washer | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner Box And Panel) (3/4)
| 01***08 | Screw | 4 |
| 01***12 | Screw | 6 |
| 01***16 | Screw | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner Box And Panel) (4/4)(#67001-67255)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***16 | Screw | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Dash Board (For Air Conditioner Box And Panel) (4/4)(#67256-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***16 | Screw | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Fire Extinguisher (English) (For Cab)
| 01***20 | Bolt | 6 |
| 01***25 | Screw | 6 |
| 01***23 | Washer | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Cover
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 13***51 | Cover | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Blade Lock Lever)
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Brade Control) (P.P.C Valve Piping)
| 02***1D | Union | 4 |
| 02***08 | O-Ring (Kit) | 4 |
| 07***18 | O-Ring, Divider Valve Mounting | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Brade Control) (With Cab)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Brake Pedal)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 6 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Electrical Equipment And Relay Box)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Floor Wiring Harness) (1/3)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Floor Wiring Harness) (2/3)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 11 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Floor Wiring Harness) (3/3)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Frame And Mount)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 8 |
| 01***20 | Bolt,Sems | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Fuel Control)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (H.S.S Controller)
| 01***85 | Bolt - M8 X 85lg | 4 |
| 01***20 | Screw | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Mount)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***10 | Bolt | 8 |
| 01***00 | Capscrew | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Parking Brake Cable)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***09 | Nut,(B) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Transmission Lock Lever)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 1 |
| 01***30 | Screw | 1 |
| 01***30 | Bolt - M8 X 30lg | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Travel Control) (Lever And Console L.H.)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***08 | Screw | 4 |
| 01***10 | Screw | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Travel Control) (Lift)(#67001-67115)
| 01***35 | Bolt | 4 |
| 01***40 | Bolt - M6 X 40lg | 4 |
| 01***30 | Bolt,(With Body Positioner) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Travel Control) (Lift)(#67116-)
| 01***35 | Bolt | 4 |
| 01***40 | Bolt - M6 X 40lg | 4 |
| 01***30 | Bolt,(With Body Positioner) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Washer Hose)(#67001-67979)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***12 | Clip | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Frame (Washer Hose)(#67980-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 04***12 | Clip | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Floor Mat (With Cab)
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Air-Conditioner Duct)(#67001-67312)
| 01***16 | Screw | 8 |
| 01***20 | Screw | 2 |
| 01***16 | Screw | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Air-Conditioner Duct)(#67313-)
| 01***16 | Screw | 8 |
| 01***20 | Screw | 2 |
| 01***16 | Screw | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Body)
| 01***20 | Bolt | 6 |
| 01***20 | Screw | 2 |
| 01***32 | Plain Washer | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Door And Door Lock) (L.H.)
| 01***30 | Bolt | 1 |
| 01***35 | Bolt | 5 |
| 01***12 | Screw | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Door And Door Lock) (R.H.)
| 01***30 | Bolt | 1 |
| 01***35 | Bolt | 5 |
| 01***12 | Screw | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Door Open Lock Bracket)
| 01***30 | Bolt,(With Gps Antenna Bracket) | 6 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Door Open Lock Latch)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 2 |
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***35 | Bolt | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Door) (Dumper? Window? Wiper) (L.H.)(#67001-67572)
| 01***30 | Bolt,R.H | 18 |
| 01***16 | Screw | 10 |
| 01***20 | Screw | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Door) (Dumper? Window? Wiper) (L.H.)(#67573-)
| 01***30 | Bolt,R.H | 18 |
| 01***16 | Screw | 10 |
| 01***20 | Screw | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Door) (Dumper? Window? Wiper) (R.H.)(#67001-67572)
| 01***30 | Bolt,R.H | 18 |
| 01***16 | Screw | 10 |
| 01***20 | Screw | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Door) (Dumper? Window? Wiper) (R.H.)(#67573-)
| 01***30 | Bolt,R.H | 18 |
| 01***16 | Screw | 10 |
| 01***20 | Screw | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Electrical Equipment) (Switch? Room Lamp? Wiper)
| 01***16 | Bolt - Box Mounting | 10 |
| 01***20 | Screw,(See Fig. K0210-17a0) | 6 |
| 01***20 | Screw | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Envelope Parts) (1/2)
| 01***20 | Screw | 33 |
| 01***30 | Screw | 14 |
| 01***08 | Screw | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Envelope Parts) (2/2)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***16 | Screw | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Fops Plate)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Grip)
| 01***25 | Screw | 4 |
| 36***50 | Handle,Grip | 2 |
| (1***2) | Cab Ass'Y,(Radio Less)(Eu Silent Spec.) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Inside Cover)
| 01***20 | Screw | 18 |
| 01***12 | Screw | 4 |
| 09***08 | Cap,(For Ripper Or Rear Hydraulic. Take) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Installation Parts)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 15 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Mirror)
| 01***25 | Screw | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 17***22 | Bracket | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Radio Mount Bracket) (Radio Add On)
| 01***16 | Screw (Without Radio) (1) | 10 |
| 01***25 | Screw | 8 |
| 01***20 | Screw | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Sash) (L.H.)
| 01***16 | Screw | 4 |
| 01***14 | Screw | 6 |
| 01***08 | Washer | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Sash) (R.H.)
| 01***16 | Screw | 4 |
| 01***14 | Screw | 6 |
| 01***08 | Washer | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Washer Hose)
| 01***08 | Screw,(Except Japan) | 2 |
| 14***30 | Tube,Black | 1 |
| 14***40 | Tube,Red | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Cab (Window)
| 17***10 | Glass | 1 |
| 17***20 | Seal,Dam | 1 |
| 17***41 | Glass | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Fabric Seat) (Air Suspension Type)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***25 | Screw | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type) (Fabric Seat)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type) (Fabric Seat) (Hiback)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type) (Fabric Seat) (With Head Rest)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Reclining Type) (Leather Seat) (Hiback)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Rigid Type)
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type) (Fabric Seat)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type) (Fabric Seat) (Hiback)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type) (Fabric Seat) (Hiback) (With Head Rest)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type) (Fabric Seat) (With Head Rest)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Turn And Reclining Type) (Leather Seat)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Turn Table Parts) (Fabric Seat)
| 17***10 | Seat Ass'Y,Fabric | 1 |
| AS***44 | Stopper | 2 |
| AS***66 | Damper | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Operator'S Seat (Turn Table Parts) (Fabric Seat) (Hiback)
| 17***10 | Seat Ass'Y,Fabric | 1 |
| AS***44 | Stopper | 2 |
| AS***66 | Damper | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Rear Work Equipment Control (For Ripper)
| 01***45 | Screw | 4 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***08 | Nut (Op) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Operator'S Compartment And Control System : Seat Belt (For Rigid Seat)
| 09***01 | Bolt,(For Shipping) | 2 |
| 09***02 | Washer,(For Shipping) | 2 |
| 09***03 | Nut,(For Shipping) | 2 |
Power Train And Final Drive
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Final Drive (Bearing) (L.H.) (Landfill Spec.)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***45 | Bolt, Mounting Cranking Motor | 3 |
| 01***45 | Bolt,(For 60ton Dump Body) | 28 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Final Drive (Bearing) (R.H.) (Landfill Spec.)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***45 | Bolt, Mounting Cranking Motor | 3 |
| 01***45 | Bolt,(For 60ton Dump Body) | 28 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Final Drive (Carrier) (L.H.) (Landfill Spec.)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 9 |
| 01***45 | Bolt,(For 60ton Dump Body) | 30 |
| 01***55 | Bolt,(Without Rops) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Final Drive (Carrier) (R.H.) (Landfill Spec.)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 9 |
| 01***45 | Bolt,(For 60ton Dump Body) | 30 |
| 01***55 | Bolt,(Without Rops) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Final Drive (Mount)
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Final Drive (Sprocket And Hub) (L.H.) (Landfill Spec.)
| 01***28 | Nut (Std) | 27 |
| 14***12 | Pinion | 1 |
| 14***12 | Teeth | 9 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Final Drive (Sprocket And Hub) (R.H.) (Landfill Spec.)
| 01***28 | Nut (Std) | 27 |
| 14***12 | Pinion | 1 |
| 14***12 | Teeth | 9 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Bevel Gear And Shaft)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***50 | Bolt,Reamer | 10 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Brake)
| 01***30 | Bolt,(With Body Positioner) | 20 |
| 01***05 | Capscrew | 6 |
| 01***50 | Bolt | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Case) (1/3)
| 01***45 | Capscrew - M16 | 15 |
| 01***70 | Capscrew | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Case) (2/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Case) (3/3) (Sensor)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***16 | Bolt | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Control)
| 01***45 | Washer,(Without R.O.P.S.) | 1 |
| 04***10 | Pin,Cotter (Without Towing Winch), Cotter Pin; Was 04050-11610 | 1 |
| 04***12 | Ring, Snap | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Gear And Shaft)
| 01***30 | Bolt,(With Body Positioner) | 24 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Steering Support)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 07***65 | O-Ring,(F4320-55a0 -12 ) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Torque Shaft)
| 14***60 | Button | 2 |
| 14***20 | Shaft | 2 |
| (1***0) | Steering Ass'Y | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : H.S.S (Valve)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 01***95 | Capscrew - M12 | 4 |
| 01***12 | Washer,(With Body Positioner) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : P/L Oil Line (Block)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***07 | Nut | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Power Line (Concentrated Piping)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Power Line (Cooler)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Power Line (Pump Related Parts)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Power Line (Pump)
| 01***45 | Screw | 4 |
| 01***55 | Screw | 4 |
| 01***90 | Capscrew | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Power Line (Support)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***60 | Capscrew | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Power Line (Wiring)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Power Line Mount
| 01***35 | Bolt,(With Rops) | 2 |
| 01***45 | Bolt,(For 60ton Dump Body) | 8 |
| 01***30 | Bolt | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Power Train
| 14***00 | Power Line Ass'Y | 1 |
| 14***02 | Power Line Ass'Y | 1 |
| (1***0) | Torque Converter A | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Torque Converter (Bare)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 36 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 14 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Torque Converter (Case)(#(100103)-)
| 01***30 | Bolt,(With Body Positioner) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***70 | Bolt | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Torque Converter (Case)(#67001-(100102))
| 01***30 | Bolt,(With Body Positioner) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***70 | Bolt | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Torque Converter (Filtration And Support)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 11 |
| 01***45 | Bolt, Mounting Cranking Motor | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 13 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Torque Converter (Power Take Off)
| 01***60 | Capscrew | 1 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 19 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 19 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Torque Converter (Scavenging Pump)
| 04***15 | Ring,Back-Up | 1 |
| 04***25 | Ring, Snap | 1 |
| 14***11 | Gear | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (1st Housing)
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 4 |
| 07***15 | Plug, (Without Air Conditioner Or Heater) | 1 |
| 10***20 | Pin, Seal - Forward Clutch | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (2nd? 3rd? Foward And Reverse Housing)
| 01***60 | Bolt | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (Carrier) (1/2)
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
| 04***18 | Ring,Snap (Without R.P.C.U.) | 5 |
| 04***19 | Ring | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (Carrier) (2/2)
| 04***12 | Ring, Snap (4) | 1 |
| 04***20 | Ring, Retaining | 1 |
| 04***35 | Bowl, Check Valve | 7 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (Case)
| 01***40 | Bolt (Op) | 4 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (Cover)
| 01***30 | Bolt,(With Body Positioner) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
| 01***85 | Bolt,(Used With Pin Puller) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (Filter And Harness)(#(101451)-)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***55 | Bolt,(See Service News) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (Filter And Harness)(#67001-(101450))
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***55 | Bolt,(See Service News) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (Input And Output Shaft)
| 07***52 | Ring, Seal | 1 |
| 14***10 | Shaft | 1 |
| 14***11 | Shaft | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (Lubrication Oil Inlet)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 02***18 | O-Ring,(F2320-62a0 -2 ) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission (Main Valve)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 07***30 | O-Ring,Transmission Case Mount | 5 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission Mount
| 01***50 | Capscrew | 13 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 12 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission Valve (Lower Valve And Mounting)
| 01***95 | Capscrew | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Transmission Valve (Upper Valve)
| 01***10 | Bolt | 20 |
| 14***90 | Upper Valve Ass'Y | 1 |
| 14***91 | Upper Valve Ass'Y | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Travel Control (Brake Rod)
| 01***11 | Nut - Mounting | 2 |
| 01***11 | Nut | 1 |
| 04***22 | Pin,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Travel Control (Parking Cable)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 04***12 | Pin,Cotter(W/Vandalism Protection) | 1 |
| 04***22 | Pin,Cotter | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Power Train And Final Drive : Universal Joint
| 01***65 | Bolt,(Used With Pin Puller) | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 42***90 | Screw | 8 |
Service Kit And Component Parts
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (3-Spool) (1/7)
| 01***65 | Hexagon Bolt | 3 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 3 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (3-Spool) (2/7)
| 01***75 | Bolt (M10-1.50x75) | 2 |
| 01***95 | Capscrew | 1 |
| 01***20 | Bolt | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (3-Spool) (3/7)
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 3 |
| 70***60 | O-Ring | 3 |
| 70***20 | O-Ring | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (3-Spool) (4/7)
| 01***45 | Bolt | 3 |
| 01***75 | Bolt | 1 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (3-Spool) (5/7)
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 1 |
| 07***35 | O-Ring, Upper Cooler Inlet And Outlet Ports | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (3-Spool) (6/7)
| 07***05 | O-Ring (K1) | 1 |
| 07***05 | Ring,Back-Up | 1 |
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (3-Spool) (7/7)
| 07***07 | O-Ring - (K10) | 1 |
| 07***07 | Ring,Back-Up | 1 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (4-Spool) (1/8) (For Trimming Dozer)
| 01***85 | Screw | 3 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 3 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (4-Spool) (2/8) (For Trimming Dozer)
| 01***75 | Bolt (M10-1.50x75) | 2 |
| 01***95 | Capscrew | 1 |
| 01***20 | Bolt | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (4-Spool) (3/8) (For Trimming Dozer)
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 3 |
| 70***60 | O-Ring | 3 |
| 70***20 | O-Ring | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (4-Spool) (4/8) (For Trimming Dozer)
| 01***45 | Bolt | 3 |
| 01***75 | Bolt | 1 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (4-Spool) (5/8) (For Trimming Dozer)
| 07***16 | O-Ring,Suction And Relief Valve | 1 |
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 1 |
| 07***35 | O-Ring, Upper Cooler Inlet And Outlet Ports | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (4-Spool) (6/8) (For Trimming Dozer)
| 07***05 | O-Ring (K1) | 1 |
| 07***05 | Ring,Back-Up | 1 |
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (4-Spool) (7/8) (For Trimming Dozer)
| 01***75 | Bolt (M10-1.50x75) | 1 |
| 01***20 | Bolt | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Control Valve (4-Spool) (8/8) (For Trimming Dozer)
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
| 70***90 | O-Ring,Suction | 1 |
| 70***00 | Valve Ass'Y,Suction And Safety | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Electric Lever
| 01***12 | Bolt | 4 |
| 08***12 | Connector | 1 |
| 70***10 | Lever Ass'Y | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Fan Motor (1/2)
| 01***16 | Screw | 2 |
| 01***35 | Bolt | 4 |
| 01***45 | Bolt | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Fan Motor (2/2)
| 01***55 | Screw | 4 |
| 04***16 | Pin,(Dowel) | 2 |
| 04***12 | Ring, Back-Up, Ring,Snap; Was 04065-03212 | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Fan Pump (1/5)
| 01***25 | Bolt, Mount Cover | 4 |
| 01***35 | Screw | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Fan Pump (2/5)
| 04***20 | Ring, Snap | 1 |
| 20***40 | O-Ring | 1 |
| 70***40 | Case | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Fan Pump (3/5)
| 01***35 | Screw | 2 |
| 07***10 | O-Ring | 1 |
| 07***23 | O-Ring | 3 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Fan Pump (4/5)
| 01***35 | Screw | 3 |
| 01***50 | Screw | 1 |
| 04***16 | Pin,(Dowel) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Fan Pump (5/5)
| 07***16 | O-Ring - Gear | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 70***30 | Plug | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hss Motor (1/2)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 8 |
| 07***35 | O-Ring, Upper Cooler Inlet And Outlet Ports | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hss Motor (2/2)
| 07***21 | O-Ring (Kit) | 1 |
| 07***18 | O-Ring (Kit) | 1 |
| 07***18 | Ring, Back-Up | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hss Pump (1/6)
| 04***18 | Bolt,(With Main Clutch Cooler) (D60p) | 2 |
| 70***20 | Pump Ass'Y | 1 |
| 70***10 | Case Ass'Y | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hss Pump (2/6)
| 04***25 | Ring,(W/Emergency Steering) (1m?1d) | 1 |
| 70***61 | Seal, Oil | 1 |
| 70***60 | Spacer | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hss Pump (3/6)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 1 |
| 01***23 | Washer,(With Auto Emergency Steering) | 1 |
| 04***14 | Pin, Dowel | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hss Pump (4/6)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 07***30 | O-Ring,Housing | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hss Pump (5/6)
| 70***11 | Servo Valve Ass'Y | 1 |
| (****5) | Nut | 1 |
| (****0) | Bearing | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hss Pump (6/6)
| 01***35 | Bolt | 4 |
| 01***25 | Screw | 2 |
| 01***65 | Screw | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hydraulic Pump (Power Line) (1/2)
| 01***10 | Bolt | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 04***24 | Pin,Dowel (For No.3 Housing) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Hydraulic Pump (Power Line) (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt | 4 |
| 01***00 | Bolt | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Lift Cylinder(#67431-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***00 | Capscrew | 4 |
| 01***40 | Bolt,(Shim 3-Piece) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Monitor Panel(#67001-67953)
| 01***12 | Capscrew - M4 | 8 |
| 01***06 | Screw | 12 |
| 78***01 | Module | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Monitor Panel(#67954-)
| 01***12 | Capscrew - M4 | 8 |
| 01***06 | Screw | 12 |
| 78***02 | Module | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Operator'S Seat (Inner Parts) (2/1)(#67846-)
| 13***01 | Seat Ass'Y | 1 |
| GJ***93 | Back Rest,Cushion | 1 |
| GJ***12 | Rest | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Operator'S Seat (Inner Parts) (2/2)(#67846-)
| GJ***53 | Cable | 1 |
| GJ***46 | Stop | 1 |
| GJ***66 | Mount | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Pilot Valve
| 01***20 | Bolt | 4 |
| 01***40 | Screw | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Ppc Valve (For Blade Control)
| 01***70 | Bolt | 4 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
| 07***20 | O-Ring,(0202-007) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Shoe Bolt And Nut Service Kit
| 13***10 | Shoe Bolt And Nut K | 1 |
| 13***21 | Nut (Y0320-K4) | 30 |
| 15***23 | Bolt? Shoe (Y0320-K1) | 30 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Tilt & Pitch Cylinder(#67001-67430)
| 01***55 | Bolt,(For Shipping) | 12 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 12 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Tilt & Pitch Cylinder(#67431-)
| 01***55 | Bolt,(For Shipping) | 12 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 12 |
| 02***09 | O-Ring,(F4350-61a0 -41 ) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Track Link (Lubricate Type) (Supply Parts)(#67001-67923)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 14***91 | Spacer | 156 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Service Kit And Component Parts : Track Link (Lubricate Type) (Supply Parts)(#67924-)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 14***91 | Spacer | 156 |
Under Carriage
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Carrier Roller
| 01***30 | Bolt - Pin Mounting | 4 |
| 01***85 | Bolt (Kit) | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Front Idler
| 01***45 | Bolt,(For 60ton Dump Body) | 16 |
| 01***13 | Nut,(See Fig.337) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 18 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Idler Cushion
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Roller Guard
| 01***45 | Bolt | 8 |
| 01***45 | Washer,(Without R.O.P.S.) | 8 |
| 14***40 | Guard | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Roller Guard (Full Guard)
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
| 01***40 | Bolt | 16 |
| 01***15 | Nut (Op) | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Frame
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt | 20 |
| 01***65 | Bolt,(For Shipping) | 8 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Frame (For Long Track)
| 01***45 | Bolt (Op) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***45 | Bolt | 14 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Roller (Single)
| 07***17 | Plug | 1 |
| 14***27 | Track Roller Ass'Y,Single Flange | 10 |
| 14***40 | Bushing | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (Heavy Duty) (510mm Wide) (For Landfill)(#67001-67923)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 13***21 | Nut (Y0320-K4) | 296 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (Heavy Duty) (510mm Wide) (For Landfill)(#67924-)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 13***21 | Nut (Y0320-K4) | 304 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (Heavy Duty) (560mm Wide) (For Landfill)(#67001-67923)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 13***21 | Nut (Y0320-K4) | 296 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (Heavy Duty) (560mm Wide) (For Landfill)(#67924-)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 13***21 | Nut (Y0320-K4) | 304 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (Heavy Duty) (610mm Wide) (For Landfill)(#67001-67923)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 13***21 | Nut (Y0320-K4) | 296 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (Heavy Duty) (610mm Wide) (For Landfill)(#67924-)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 13***21 | Nut (Y0320-K4) | 304 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (Heavy Duty) (660mm Wide) (For Landfill)(#67001-67923)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 13***21 | Nut (Y0320-K4) | 296 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser) (Heavy Duty) (660mm Wide) (For Landfill)(#67924-)
| 07***30 | Plug,(Large) | 78 |
| 07***21 | Plug,(Small) | 78 |
| 13***21 | Nut (Y0320-K4) | 304 |
Work Equipment
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Arm And Brace (Tilt Dozer)
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
| 01***75 | Capscrew | 16 |
| 01***25 | Bolt | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Arm And Brace (Tilt Dozer) (Fixed Type)
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
| 01***75 | Capscrew | 16 |
| 01***25 | Bolt | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Counter Weight
| 01***19 | Nut - M24 | 4 |
| 01***26 | Nut,(For Rubber Shoe) | 2 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Drawbar
| 01***65 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***65 | Bolt | 1 |
| 01***15 | Nut | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Drawbar (Rigid Type)
| 01***75 | Bolt | 6 |
| 01***60 | Bolt (Itl) | 1 |
| 01***19 | Nut | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Drawbar (Rigid Type) (For Scraper)
| 01***75 | Bolt | 2 |
| 01***90 | Bolt (Itl) | 4 |
| 01***60 | Bolt (Itl) | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Drawbar (With Counter Weight)
| 01***65 | Bolt | 1 |
| 01***15 | Nut | 1 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 6 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Lift Cylinder
| 70***70 | Cylinder Group,L.H | 1 |
| 70***71 | Cylinder Group,L.H | 1 |
| 70***80 | Cylinder Group,R.H | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Lift Cylinder (Cylinder Fixing Parts)
| 01***50 | Bolt | 2 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
| 01***15 | Nut | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Ripper (Riged Type)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***80 | Bolt | 10 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Ripper Cylinder
| 70***50 | Cylinder Group | 1 |
| 70***51 | Cylinder Group | 1 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Ripper Cylinder Plug
| 02***28 | Plug | 2 |
| 02***18 | O-Ring,(F5350-63a0 -17 ) | 2 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Straight Blade
| 01***35 | Bolt,(With Rops) | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
| 02***70 | Bolt, Plow | 28 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Straight Frame
| 01***40 | Bolt,For Weight Adjusting Bolt | 8 |
| 01***65 | Bolt,(Without Rops) | 16 |
| 01***65 | Bolt,L.H. (Kit) | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Tilt Dozer Line
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 18 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
| 01***30 | Bolt - Pin Mounting | 4 |
Komatsu : D65ex-15(S/N 67001-Up (Landfill Spec.)) : Work Equipment : Tilt Or Pitch Cylinder
| 70***00 | Tilt Cylinder Ass'Y,(For Tilt Dozer) | 1 |
| 70***01 | Tilt Cylinder Ass'Y,(For Tilt Dozer) | 1 |
D65EX-15(S/N 67001-UP (Landfill Spec.)) serial number reference
The PIN/serial plate on the D65EX-15 dash-15 dozer is at the front, low on the operator's seat area (shop-manual sample pages place it at the front bottom right of the operator's seat); a separate engine serial plate sits on the left side of the engine front cover. For this generation Komatsu uses a plain numeric serial number (no 3-letter alpha prefix like some other makes); the plate shows the full model designation (e.g. D65EX-15) followed by the machine serial number, and that serial number is what falls into a break such as 67001-UP or 69001-UP. Match the model text on the plate first, then the serial number, against the parts/shop manual serial-range title to confirm you have the right documentation.
| Prefix | Identifies | Notes |
|---|---|---|
| 67001-UP (Std/base) | D65EX-15, standard/domestic spec - hydrostatic steering (HSS) | Dash-15 generation crawler dozer, S/N 67001 and up. Mounts the SAA6D114E-3 diesel, turbocharged and aftercooled, net rating in the 138-153 kW (185-208 HP) range at 1950 rpm - figure varies by document (gross vs net, and by spec-sheet revision). Meets EPA Tier 3 / EU Stage IIIA. Same factory shop manual also covers the D65PX-15 and D65WX-15 built on this same serial break, so 67001-UP is shared across the E/P/W frame variants, not unique to one configuration. |
| 67001-UP (Landfill Spec.) | D65EX-15, Landfill Spec. - target machine | Same base machine, engine, and serial break as the standard 67001-UP D65EX-15, sold under a separate parts catalog labeled Landfill Spec. Underlying dozer hardware (SAA6D114E-3 engine, HSS steering) matches the standard version; exact landfill-duty equipment differences (guarding, counterweight, etc.) are not spelled out in the catalog listing itself - confirm exact deltas with a dealer parts department. |
| 67001-UP (Overseas Version) | D65EX-15, Overseas Version | Listed as a distinct parts catalog under the same 67001-UP serial break as the Landfill Spec. and Std. machines - a regional/export specification rather than a different serial range. Thin documentation; confirm with dealer. |
| 67001-UP (Trimming Dozer, For China) | D65EX-15, Trimming Dozer spec for China | Separate parts catalog entry under the same 67001-UP break, marketed for the China trimming-dozer application. Thin documentation; confirm with dealer. |
| 67001-UP (LGP/swamp) | D65PX-15, wide-gauge power-angle-tilt frame, hydrostatic steering (HSS) | Power-angle-tilt blade, wider-gauge undercarriage and swamp-type track shoe option versus the E-frame machine, for lower ground-pressure duty. Covered by the same shop manual and serial break (67001-UP) as the D65EX-15, same SAA6D114E-3 engine family. |
| 67001-UP (extra-wide/swamp) | D65WX-15, extra-wide swamp frame, hydrostatic steering (HSS) | Widest-gauge frame of the three dash-15 configurations, longer track-on-ground than the E-frame machine, for soft-ground/swamp work. Shares the 67001-UP serial break and shop manual with the D65EX-15 and D65PX-15. |
| 69001-UP (E0 follow-on) | D65EX-15E0 / D65PX-15E0 / D65WX-15E0 - follow-on model on its own serial break | Running change on a separate 69001-UP serial break and its own shop/parts manual set. Spec sheets for the E0 machines still show the SAA6D114E-3 engine, so this is not a documented engine swap - it is a distinct model designation (D65EX-15E0, not D65EX-15) rather than a configuration of the Landfill Spec. machine. Noted here only because it is the direct continuation of the same 67001-UP family; confirm with dealer before treating it as interchangeable with 67001-UP parts. |
Frequently asked questions
What engine powers the Komatsu D65EX-15 (S/N 67001-UP, Landfill Spec.)?
A Komatsu SAA6D114E-3, a turbocharged, aftercooled six-cylinder diesel displacing 8.27 liters, rated at roughly 155 kW (208 HP) gross at 1950 rpm and meeting Tier 3/Stage IIIA emission standards.
What is the operating weight of the D65EX-15 (S/N 67001-UP, Landfill Spec.)?
About 20,280 kg (44,710 lb) with a Semi-U tilt blade. Weight shifts slightly with blade choice (straight-tilt versus Semi-U) and undercarriage width (EX, PX, or WX), so treat this as a class-typical figure rather than a fixed number.
What replaced the Komatsu D65EX-15?
The Komatsu D65EX-16 followed it directly as the next generation, carried on through the D65EX-17, and continues today as the Tier 4 Final D65EX-18 and intelligent Machine Control D65EXi-18, including a factory Waste Handler variant that continues this landfill-duty lineage.
What D65EX-15(S/N 67001-UP (Landfill Spec.)) owners discuss
What is the real-world engine durability like on the D65EX-15 (67001-up, Landfill Spec.), and are there any quirks tied to this engine family?
The engine is the Komatsu SAA6D114E-3, a turbocharged, air-to-air aftercooled six-cylinder with common-rail injection, meeting EPA Tier 3 / EU Stage IIIA. Owners report the block commonly running 8,000-11,000 hours before a rebuild is warranted with disciplined oil and filter intervals and clean fuel; some machines pass 15,000 hours untouched, while others need attention closer to 5,000-7,500 hours when liner O-ring seepage or coolant contamination goes unnoticed early. This engine family shares core architecture with the Cummins QSC8.3, so parts houses sometimes list rebuild kits and injectors across both brand names - that is a sourcing quirk, not a sign the wrong engine is fitted.
Owners mention hydraulic oil showing up in the transmission - is that a known issue on this machine?
Yes, it comes up repeatedly on this D65 platform. Hydraulic fluid dilutes into the transmission/torque-converter case with no visible external leak, in some cases losing several liters per shift. The two causes discussed most are a worn seal on one of the pumps driven off the transmission, or a leaking HSS (hydrostatic steering system) motor mounted on top of the steering case overfilling that housing and migrating oil into the transmission. Isolate which pump or motor is at fault with a drain-and-pressure check before ordering parts. Have your dealer verify the pump and seal diagnosis before committing to a rebuild kit.
Does the cooling system struggle in landfill/waste duty, and what should be checked first?
Landfill operators say the fight is usually debris on the radiator core, not raw heat load. The fan is hydraulic-driven with normal, reverse, and clean settings so wrapped trash can be blown off the core without shutting down to hand-clean it. When the fan-mode switch fails, or the fan pump/motor loses flow, the fan gets stuck in one mode and overheating shows up fast in warm weather even with a fresh water pump, thermostat, and a core that looks clean. Confirm the fan actually changes speed and direction under load, not just that the switch clicks. Have your dealer verify fan pump output and motor condition if reversal feels sluggish or inconsistent.
What electrical or sensor problems come up most often on this model?
Multi-year owners generally report the major components holding up, with the recurring headaches being sensors and harness connectors around the engine and transmission controllers. Field techs point to the harness on the sensor side chafing through its insulation over time and losing ground, which throws intermittent steering/transmission-controller and pitch-angle-sensor fault codes that look like a part failure but are really a wiring issue. Before replacing a sensor, check the ground path and harness routing near ROPS mounts and engine-to-frame flex points for wear.
Is steering hesitation a known complaint, and what usually causes it?
Hesitant or delayed turning on the HSS steering system is traced most often to the hydraulic solenoid valves controlling the left and right track clutches rather than the steering pump itself. The diagnostic pattern owners describe: confirm pump pressure reaches the valve, then confirm the valve passes that pressure through to the actuator; a bad valve shows pressure on the inlet side but not the outlet side. Because steering response affects control on grade and slope work, this is safety-critical. Have your dealer verify clutch and valve pressures against factory spec before returning the machine to service.
How does the undercarriage hold up in landfill service compared to standard dirt-moving duty?
The landfill-spec machine uses the same elevated-sprocket undercarriage as the standard D65EX-15, with segmented sprockets, large-diameter bushings, and heavier seals intended to extend chain life. In refuse service, owners note wear accelerates faster than in dirt work because of wrapped debris and embedded metal or glass working into the chain and rollers. The segmented sprocket design is an advantage here since a single worn segment can be swapped in the field without pulling the whole sprocket. Daily clearing of trash from the track frame and underguard is recommended rather than waiting for a scheduled undercarriage inspection.
What should a buyer check before purchasing a used D65EX-15 (67001-up, Landfill Spec.)?
Confirm the underguard winch still raises and lowers freely and the guard itself is not rotted or corroded from trash acids and moisture. Cycle the fan through all three modes to rule out a stuck switch before it turns into an overheating complaint. Watch the transmission oil level and color over a test run for hydraulic-oil dilution. Pull controller fault codes to see whether steering/transmission or pitch-angle faults are current or just logged history from a wiring chafe point. Verify the counterweight and debris screens are the landfill-spec pieces and have not been swapped for standard parts, since that affects balance and protection. Ask for full service records, since landfill duty is harder on the machine per hour than typical dirt work. Have your dealer verify hydraulic and steering system pressures against factory spec as part of any pre-purchase inspection.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific D65EX-15(S/N 67001-UP (Landfill Spec.)) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.