Komatsubulldozermedium (d40 - d75)
Komatsu D60A-8(S/N 45001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu D60A-8 (S/N 45001-UP) is a mid-size crawler dozer in Komatsu's Series-8 line from the 1980s, built for general earthmoving, grading, and land-clearing work. It runs a naturally aspirated Komatsu 6D125-1 inline-six diesel rated around 119 kW (160 hp) at 1850 rpm, feeding a powershift transmission with 5 forward and 4 reverse gears through lever/pedal-operated multi-disc steering clutches and brake bands rather than a hydrostatic drive. Operating weight sits near 15,990 kg (35,252 lb) with the standard S-type dozer blade at 3.99 m (13.1 ft) wide. The A-suffix designates the standard blade tractor configuration on a 6-roller track frame, sold alongside E, P, and PL variants sharing the same chassis and factory shop manual coverage. It followed earlier D60A generations and sits in the same Series-8 family as the larger-frame D65A-8, both riding this factory manual set for the 45001-and-up serial break.
Across this series, Komatsu split the lineup by blade and undercarriage configuration more than by powertrain: A models carry a standard blade on six-roller track frames, while E, P, and PL variants change blade type, frame length, or roller count for pipeline, swamp, or production-dozing work. The 45001-and-up serial break marks a mid-cycle running change to the shop manual rather than a full model redesign, so parts and procedures carry across the A/E/P/PL family with only minor configuration-specific differences. In the used-equipment and parts market today, the D60A-8 remains a straightforward mechanical machine with no electronic controls to fail, which keeps it attractive for buyers who want a simple, field-serviceable dozer for moderate-duty grading. Its main draw for parts buyers is the shared drivetrain and undercarriage architecture with the wider family of siblings, which broadens the pool of usable take-off components and keeps rebuild parts more available than for a single-model machine.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu D60A-8(S/N 45001-UP) specifications
Engine
| Engine model | Komatsu 6D125-1 (6-cylinder, water-cooled, direct-injection diesel) |
| Gross power | 160 hp (119.3 kW) at 1,850 rpm |
| Displacement | 11,042 cc (673.8 cu in) |
| Emissions/electronic controls | Mechanical (pre-electronic) fuel system; no ECM/ADEM documented for this SN range |
| Notes | 6D125-1 confirmed across independent spec databases for this exact SN 45001-UP range. The related D60P-8 (LGP-style) shares the 6D125-1 block but is rated higher at 165 hp (123 kW) — do not use that figure for the standard D60A-8. |
Weights
| Operating weight (standard configuration) | 15,990 kg (35,252 lb) |
| Notes | Figure agrees across two independent spec aggregators for D60A-8. Weight varies by blade/ripper fitment; heavier LGP/swamp variants (e.g. D60P-8) run closer to 17,550 kg (38,691 lb) — that is a separate model, not the D60A-8. |
Dimensions
| Overall length, with blade | 5.18 m (17.0 ft) |
| Overall length, without blade | 4.08 m (13.4 ft) |
| Overall width over tracks | 2.39–2.41 m (7.85–7.9 ft) |
| Overall height, to top of cab | 3.02 m (9.9 ft) |
| Ground clearance | 0.40–0.43 m (1.3–1.4 ft) |
| Length of track on ground | 2.43 m (7.98 ft) |
| Track gauge | 1.88–1.89 m (6.17–6.2 ft) |
| Standard track shoe width | 510 mm (20.1 in) |
| Track rollers per side | 6 |
| Carrier rollers per side | 2 |
| Track pitch | approx. 203 mm (8 in) |
| Blade width options | Standard S-type dozer blade at 3.99 m (13.1 ft) documented; SU/A/VPAT blade options not confirmed for this exact SN range in available sources |
Performance
| Travel speed (forward/reverse) | Not documented for this exact serial range — verify with your dealer or the shop manual |
| Drawbar pull | Not documented for this exact serial range in available spec sources |
| Ground pressure | Not documented for this exact serial range in available spec sources |
| Gradeability | Not documented for this exact serial range in available spec sources |
| Transmission | Powershift, DD-type, 5 forward / 4 reverse gears |
Blades
| Standard (S-type) blade width | 3.99 m (13.1 ft) |
| Standard blade height | 1.05 m (41.4 in) |
| SU/A/VPAT blade capacities | Not documented for this exact SN range in available spec sources; the D60A-8 is generally offered with a straight (S-type) dozer blade per available data |
Service capacities summary
| Fuel tank capacity | Not documented for this exact serial range in available spec sources |
| Hydraulic system capacity | Not documented for this exact serial range in available spec sources |
| Engine oil capacity | Not documented for this exact serial range in available spec sources |
| Cooling system capacity | Not documented for this exact serial range in available spec sources; the predecessor generation used approximately 55 L (14.5 gal), but this figure is not confirmed for this generation and should not be assumed identical |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
D60A-8(S/N 45001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Komatsu 6D125-1, 11L 6-cylinder naturally aspirated | Not documented for this exact serial range in available sources. Engines in this displacement class typically run mid-20s liters (approx. 25-28 L / 6.6-7.4 US gal) with filter change — treat as indicative only, not a confirmed figure. Verify against the OMM lubrication chart or your dealer. | |
| Cooling system | Not confirmed for this exact serial range. The predecessor generation (same base chassis/6D125-family engine) is commonly listed around 55 L (14.5 US gal) — given only as a generational reference point, not a confirmed figure. Capacity varies by configuration/series; verify with your dealer or the OMM. | Komatsu genuine year-round antifreeze/coolant (ethylene-glycol base), mixed to the ratio the OMM specifies for the operating climate, with supplemental coolant additive maintained on schedule. |
| Fuel tank | Not documented in available sources for this serial range. | Diesel fuel meeting ASTM D975 No. 2-D for normal service, or No. 1-D in cold climates, per the OMM fuel specification. |
| Transmission (powershift) + bevel gear / steering compartments | Not documented for this exact serial range in available sources. | Komatsu Genuine Powertrain Oil, TO-10 or TO-30 grade, meeting Komatsu spec KES 07.868.1 (exceeds Caterpillar TO-4 performance). Grade choice follows the OMM's ambient-temperature chart: TO-10 for colder climates, TO-30 for warmer climates. |
| Final drives (each) | Not documented for this exact serial range in available sources. | Same Komatsu Powertrain Oil family used in the transmission/bevel gear system (TO-10/TO-30, KES 07.868.1), per the shop manual shared across this generation. |
| Hydraulic system / tank | Not documented for this exact serial range in available sources. | Komatsu Genuine Hydraulic Oil, or the same Powertrain Oil family where the OMM specifies a shared hydraulic/powertrain fill for this generation — confirm which applies from the OMM lubrication chart, since practice differs across Komatsu dozer generations of this era. |
| Pivot shaft | Not listed as a separate lubrication point in available sources for this model/serial range — may not carry a distinct pivot-shaft oil compartment on this generation, or simply isn't documented online. | If equipped, service per the periodic grease/oil interval in the OMM lubrication chart. |
| Grease specs | Not a fill capacity — serviced by interval at grease fittings per the OMM chart. | Komatsu Genuine grease, NLGI #2 lithium-based multipurpose grease, for track pins/idlers, pivot points, blade linkage, and other grease fittings. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu D60A-8(S/N 45001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the D60A-8(S/N 45001-UP) beyond the schedule
Predictive Maintenance and Fluid Analysis
Because the 6D125-1 runs mechanical injection with no ECM, there is no onboard diagnostic trail, so scheduled oil sampling is the main early-warning tool. Pull engine, powershift transmission, and final drive oil samples at each 500-hour interval to track metal wear trends before steering clutch discs or gear sets fail outright. Watch coolant condition closely since this engine has no turbo to mask early overheating symptoms; a slow coolant level drop often signals a head gasket or water pump seal issue forming.
Corrective and Common Repairs
Steering clutch and brake band wear is the most common corrective job on this drivetrain, since directional control depends entirely on mechanical multi-disc clutches and band linkage rather than hydrostatic steering. Expect linkage adjustment or disc replacement as recurring work, along with final drive seal leaks at the case-to-track-frame joint. Powershift transmission clutch packs and the injection pump governor linkage are the other frequent wear points on higher-hour units.
Overhaul and Rebuild Points
Major rebuild work centers on the final drives, steering clutch packs, and undercarriage. Track links, bushings, and sprockets wear as a set and are best replaced together rather than piecemeal to keep pitch matched. At engine overhaul, check cylinder liner and piston wear on the naturally aspirated 6D125-1, and recalibrate injection timing and governor settings after any fuel system teardown to restore rated power and smooth idle.
Seasonal and Environment Servicing
In cold climates, use a lower-viscosity engine oil grade and block heater or coolant heater to ease cold starts on this mechanically injected engine, since it lacks glow-plug or ether-start electronic assist found on later models. In hot or dusty environments, shorten air cleaner and radiator fin cleaning intervals to protect the naturally aspirated engine's breathing, and check track tension more often as heat accelerates chain wear and stretch.
D60A-8(S/N 45001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| 145-Z79-5810 | Filter,Air | Air intake service | Check fitment → |
| 07000-02080 | O-Ring,Hydraulic Oil Filter | Hydraulic service | Check fitment → |
| ND090438-0420 | Shim? 1.9mm,Element Holder | Scheduled service item | Check fitment → |
| ND090438-0490 | Shim? 2.25mm,Element Holder | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
D60A-8(S/N 45001-UP) attachments & work tools
Blades
Factory standard dozer blade is a straight (S-type) unit, 3.99 m (13.1 ft) wide by roughly 105 cm (41.4 in) tall, mounted on a cable/hydraulic-controlled push arm arrangement typical of this class. Semi-U (SU) or angling (A) blade variants are documented for sibling machines in the same shop-manual family, but a confirmed factory S/SU/A breakdown specific to this exact serial range is not published — verify blade code with your dealer before ordering. No power-angle-tilt (PAT/VPAT-style) blade option is documented for this model; that feature is more common on later or smaller Komatsu dozer classes.
Rippers
Ripper attachment uses a single hydraulic lift/tilt cylinder pairing with roughly 160 mm bore and 75 mm rod, consistent with a parallelogram-style rear ripper for this weight class. Both single-shank (heavy-penetration) and multi-shank (2-3 shank, faster coverage) beam options are typical for machines in this class, though the exact shank count offered on this specific serial range is not separately documented — expect roughly 1.0-1.8 t for the ripper assembly, varies by configuration.
Winches
Aftermarket PTO and hydraulic-drive towing winches are offered across the full Komatsu dozer line spanning a broad weight-class bracket that includes this machine, but no specific winch model or line-pull class is confirmed as a factory-fit option for this exact serial range. Treat winch fitment as case-by-case and confirm mounting/PTO compatibility with the supplier.
Drawbars/Counterweights
A rear drawbar/trunnion bracket for towing and implement hookup is standard rear equipment on this class of dozer, structurally covered under the shop manual's work-equipment section, but no separate counterweight package is documented for this serial range. Rear ripper mounting itself adds meaningful counterbalance to the front blade load on this chassis.
Cab/ROPS guarding options for forestry/waste
No factory forestry or waste-handler guarding package (screens, sweeps, brush guards) is documented for this specific serial range. Later-generation Komatsu waste-handler models offer full screen/sweep/roof guard kits, but that is a separate, newer model line and should not be assumed to carry over to this machine without dealer confirmation.
Hydraulic arrangement front/rear
Blade lift/tilt functions are run off the machine's main work-equipment hydraulic circuit at the front, while the ripper lift/tilt cylinders tap the same pump system routed to the rear of the chassis, per the shop manual's hydraulic and work-equipment sections. Both front and rear circuits share the same hydraulic pump source rather than running independent dedicated pumps.
All D60A-8(S/N 45001-UP) assemblies by section
Every catalogued assembly group for the Komatsu D60A-8(S/N 45001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
6d125-1e S/N 10001-Up
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Air Cleaner And Mounting (With Turbochargwer) (Except Japan)
| 01***40 | Bolt,(Dust And Dirt Protection) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 6 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Air Cleaner And Mounting(#10001-14199)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Air Cleaner And Mounting(#14200-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 6 |
| 01***16 | Washer,Radio Controlled Slag Handling | 6 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Air Intake Manifold And Connection
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 11 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 6 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Air Intake Manifold And Connection (With Turbocharger) (Except Japan)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 11 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 5 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Alternator (13a)
| 60***50 | Alternator A. (13a),(With Non Hardening Pulley) | 1 |
| 60***70 | Alternator A. (13a),(Sandy And Dusty Terrain S.) | 1 |
| KD***31 | Bushing,Insulator | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Alternator (35a)(#11082-)
| 60***60 | Alternator A. (35a),(With Non Hardening Pulley) | 1 |
| KD***57 | Bearing,Ball? Front | 1 |
| KD***80 | Collar | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Alternator And Mounting (13a)
| 01***80 | Bolt,(Not Shown) | 1 |
| 01***30 | Bolt | 1 |
| 01***11 | Nut (Welded) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Alternator And Mounting (35a)(#11082-)
| 01***90 | Bolt, Fan Mounting | 1 |
| 01***30 | Bolt | 1 |
| 01***23 | Washer,(A)(W/After Cooler)(S6d155-4b) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Camshaft
| 01***22 | Bolt | 2 |
| 04***25 | Key, Plain Woodruff | 1 |
| 04***12 | Ring,Snap (For Ripper) | 12 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Cooling Fan And Mounting
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 22 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Corrosion Resistor And Piping
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
| 02***25 | Bolt,(Cold Weather Spec.) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Crankshaft
| 01***70 | Bolt, Accumulator Mounting Bracket | 6 |
| 01***10 | Bolt,(Noise Suppression Spec.) | 6 |
| 01***35 | Bolt | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Cylinder Block
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 14 |
| 04***14 | Pin, Dowel | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Cylinder Block Cover
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***00 | Bolt, Mount Back-Up Alarm | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Cylinder Head(#10001-26915)
| 04***20 | Pin,Dowel (Welded) | 2 |
| 61***30 | Sleeve,Holder | 1 |
| 61***20 | Cotter, Valve | 48 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Cylinder Head(#26916-)
| 04***20 | Pin,Dowel (Welded) | 2 |
| 61***30 | Sleeve,Holder | 1 |
| 61***20 | Cotter, Valve | 48 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Exhaust Manifold And Mounting
| 01***80 | Bolt, Mount Strainer Flange | 18 |
| 01***00 | Bolt (M10-1.50x100) | 16 |
| 07***08 | Plug,(Without Auto Priming System) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Exhaust Manifold And Mounting (With Turbocharger) (Except Japan)
| 01***80 | Bolt, Mount Strainer Flange | 2 |
| 01***00 | Bolt (M10-1.50x100) | 16 |
| 01***45 | Screw | 4 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Extension Cap And Rain Cap
| 01***11 | Nut,(Spark Arrester Spec.) | 2 |
| 01***23 | Plain Washer | 2 |
| 07***19 | Clamp | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Flywheel And Flywheel Housing
| 01***40 | Bolt,(Dust And Dirt Protection) | 2 |
| 01***50 | Bolt | 2 |
| 01***50 | Bolt, Radiator To Frame | 6 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Flywheel And Flywheel Housing (Noise Suppression Spec.)(#33755-)
| 01***40 | Bolt,(Dust And Dirt Protection) | 2 |
| 01***50 | Bolt, Radiator To Frame | 6 |
| 01***70 | Bolt - Thrust Plate Mounting | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Front Cover And Front Support
| 01***25 | Bolt,(Without Auto Priming System) | 6 |
| 01***60 | Screw | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Front Cover And Front Support (Noise Suppression Spec.)(#33755-)
| 01***25 | Bolt,(Without Auto Priming System) | 6 |
| 01***60 | Screw | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Control Lever
| 01***20 | Screw | 3 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 3 |
| 01***09 | Nut (Itl) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Filter And Piping
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***16 | Washer,Radio Controlled Slag Handling | 2 |
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Coupling) (With Turbocharger) (Except Japan)(#.-)
| ND***10 | Flange,Coupling | 1 |
| ND***50 | Bolt | 1 |
| ND***40 | Bolt | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Coupling) (With Turbocharger) (Except Japan)(#10001-.)
| ND***50 | Bolt | 1 |
| ND***70 | Bolt | 2 |
| ND***30 | Coupling Ass'Y | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Coupling)(#10001-19616)
| ND***50 | Bolt | 1 |
| ND***70 | Bolt | 2 |
| ND***30 | Coupling Ass'Y | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Coupling)(#19617-)
| ND***10 | Flange,Coupling | 1 |
| ND***50 | Bolt | 1 |
| ND***40 | Bolt | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Feed Pump)
| ND***40 | Washer? 1mm,Plate | 1 |
| ND***00 | Pump Ass'Y,Priming Pump | 1 |
| ND***70 | Washer,Union | 4 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Feed Pump) (With Turbocharger) (Except Japan)
| ND***40 | Washer? 1mm,Plate | 1 |
| ND***00 | Pump Ass'Y,Priming Pump | 1 |
| ND***70 | Washer,Union | 4 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Governor) (1/2)
| ND***40 | Plate,Thrust | 1 |
| ND***80 | Pin,Stop | 1 |
| ND***40 | Plug,Screw | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Governor) (1/2) (With Turbocharger) (Except Japan)(#.-)
| ND***40 | Plate,Thrust | 1 |
| ND***40 | Plug,Screw | 1 |
| ND***50 | Washer? 0.3mm | 0 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Governor) (1/2) (With Turbocharger) (Except Japan)(#10001-.)
| ND***40 | Plate,Thrust | 1 |
| ND***40 | Plug,Screw | 1 |
| ND***10 | Adapter | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Governor) (2/2)
| ND***70 | Arm,Spring | 1 |
| ND***20 | Washer? 1.0mm,Cover Plate | 2 |
| ND***90 | Seal,Oil | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Governor) (2/2) (With Turbocharger) (Except Japan)(#.-)
| ND***80 | Pin,Stop | 1 |
| ND***70 | Arm,Spring | 1 |
| ND***20 | Washer? 1.0mm,Cover Plate | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Governor) (2/2) (With Turbocharger) (Except Japan)(#10001-.)
| ND***30 | Capsule,Full Stop | 1 |
| ND***70 | Arm,Spring | 1 |
| ND***20 | Washer? 1.0mm,Cover Plate | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Pump) (With Turbocharger) (Except Japan)(#.-)
| 61***41 | Injection Pump A | 1 |
| 61***42 | Injection Pump A | 1 |
| ND***50 | Ring,Adjust | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Pump) (With Turbocharger) (Except Japan)(#10001-.)
| 61***40 | Injection Pump A | 1 |
| ND***50 | Ring,Adjust | 1 |
| ND***80 | O-Ring | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Pump)(#10001-19616)
| 61***41 | Injection Pump A.,(For D65s) (See Fig.460) | 1 |
| ND***50 | Ring,Adjust | 1 |
| ND***80 | O-Ring | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump (Pump)(#19617-)
| 61***42 | Injection Pump A | 1 |
| 61***43 | Injection Pump A | 1 |
| ND***50 | Ring,Adjust | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump And Piping
| 01***75 | Bolt,(See Fig.0142) | 4 |
| 01***30 | Bolt | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Injection Pump And Piping (With Turbocharger) (Except Japan)
| 01***75 | Bolt,(See Fig.0142) | 4 |
| 01***30 | Bolt | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Nozzle And Spill Tube(#10001-10063)
| 01***45 | Bolt, Divider Valve Mounting | 12 |
| 07***65 | O-Ring,Cylinder Block | 6 |
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Fuel Nozzle And Spill Tube(#10064-)
| 01***45 | Bolt, Divider Valve Mounting | 12 |
| 07***65 | O-Ring,Cylinder Block | 6 |
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Gasket Kit
| 01***23 | Washer,Lock (K5) | 3 |
| 02***43 | O-Ring,Water Manifold | 10 |
| 06***03 | Seal,Bearing (K2) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Heater Switch And Heater Signal
| 08***35 | Indicator,Dust (Japanese-English) | 1 |
| 60***30 | Signal,Engine Pre Heater | 1 |
| (6***0) | Switch,Heater (See Fig.0131 Or 0131a) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Lubricating Oil Cooler
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 13 |
| 01***65 | Bolt,(Except Japan) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Lubricating Oil Filter And Mounting
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Lubricating Oil Piping
| 01***50 | Bolt,(With Service Valve R.H.) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
| 01***16 | Washer,Radio Controlled Slag Handling | 13 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Lubricating Oil Pump And Suction Pipe
| 01***25 | Bolt,(Without Auto Priming System) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 5 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Main Clutch Oil Cooler
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 3 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Muffler And Mounting
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***40 | Bolt,(Dust And Dirt Protection) | 4 |
| 01***30 | Bolt, Mount Pump | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Muffler And Mounting (With Turbocharger) (Except Japan)
| 01***40 | Bolt,(Dust And Dirt Protection) | 4 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 4 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Oil Pan
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 31 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***16 | Washer,Radio Controlled Slag Handling | 37 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Piston And Connecting Rod
| 02***13 | Pin, Dowel | 2 |
| 04***18 | Ring, Snap | 12 |
| 61***30 | Piston Ring Ass'Y | 6 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Power Take Off (1/2)
| 01***10 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
| 01***40 | Bolt,(With Service Valve R.H.) | 6 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Power Take Off (2/2)
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Power Take Off Lubricating Oil Piping
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 1 |
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 23 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Rocker Arm And Housing
| 01***08 | Nut,R.H. Thread | 12 |
| 01***16 | Washer,Radio Controlled Slag Handling | 40 |
| 01***32 | Washer,(With Auto Emergency Steering) | 40 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Rocker Arm Housing Cover
| 01***16 | Washer,Radio Controlled Slag Handling | 24 |
| 61***10 | Cover,Head? No.2?3?4?5?6 | 6 |
| 61***11 | Cover,Head? No.2?3?4?5?6 | 6 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Starting Motor (11kw)(#10579-35403)
| 60***70 | Starting Motor Ass'Y,(11kw) | 1 |
| 60***71 | Starting Motor Ass'Y,(11kw)(See Fig.0662) | 1 |
| 60***10 | Starting Motor Ass'Y,(11kw)(See Fig.0662) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Starting Motor (11kw)(#35404-)
| 60***12 | Starting Motor Ass'Y,(11kw) | 1 |
| SD***X9 | Switch Ass'Y,Engage | 1 |
| SD***X0 | Bearing,Ball | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Starting Motor (7.5kw)(#10001-18199)
| 60***30 | Starting Motor Ass'Y,(7.5kw)(See Fig.0661) | 1 |
| KD***20 | Magnetic Switch Assembly | 1 |
| KD***40 | Spring,Spring | 4 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Starting Motor (7.5kw)(#18200-)
| 60***30 | Starting Motor Ass'Y,(7.5kw) | 1 |
| KD***60 | Shift Lever Assembly | 1 |
| KD***40 | Spring,Spring | 4 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Starting Motor And Mounting (7.5kw? 11kw)
| 01***40 | Bolt,(With Center Guard) | 3 |
| 66***10 | Gasket,Starting Motor | 1 |
| (6***1) | Starting Motor Ass'Y,(11kw)(See Fig.0662) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Turbocharger (Except Japan)
| 61***00 | Turbocharger Ass'Y,(Tv7705) | 1 |
| GA***85 | V-Band Ass'Y | 1 |
| GA***85 | V-Band | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Turbocharger Lubricating Oil Piping (With Turbocharger) (Except Japan)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Water Manifold And Thermostat(#10001-18199)
| 02***43 | O-Ring,Water Manifold | 10 |
| 07***12 | Washer, Gasket,(Without Thermo Sensor) (K1) | 1 |
| 07***12 | Plug,(Without Corrosion Resistor) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Water Manifold And Thermostat(#18200-)
| 02***43 | O-Ring,Water Manifold | 6 |
| 07***12 | Washer, Gasket,(Without Thermo Sensor) (K1) | 1 |
| 07***12 | Plug,(Without Corrosion Resistor) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Water Pump And Mounting
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Water Separator
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 1 |
| 60***00 | Water Separator A.,(4d105-5h? 4d105-5t) | 1 |
| 60***60 | Plug,Drain (4d105-5h? 4d105-5t) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : 6d125-1e S/N 10001-Up : Water Separator And Mounting(#12481-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
| 01***50 | Bolt,(With Service Valve R.H.) | 1 |
Engine Related Parts And Electrical System
Komatsu : D60a-8(S/N 45001-Up) : Engine Related Parts And Electrical System : Battery
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Engine Related Parts And Electrical System : Electrical System
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 7 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Engine Related Parts And Electrical System : Engine Attaching Parts
| 01***20 | Bolt | 4 |
| 01***54 | Washer,Spring (D65p) | 4 |
| 04***50 | Wire,(For Slag Handling) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Engine Related Parts And Electrical System : Fuel Control Lever
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Engine Related Parts And Electrical System : Fuel Tank
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 6 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Engine Related Parts And Electrical System : Fuel Tank Piping
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 3 |
| 07***24 | Hose,(Orange) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Engine Related Parts And Electrical System : Instrument Panel
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***16 | Screw, Mount Parking Lights | 2 |
| 01***20 | Screw - Turn Signal And Parkinglight Mounting | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Engine Related Parts And Electrical System : Radiator
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 64 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Engine Related Parts And Electrical System : Radiator Piping And Cover
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Guard
Komatsu : D60a-8(S/N 45001-Up) : Guard : Box And Floor
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 24 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Canopy (Std For Japan) (Op Except Japan)
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 10 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 8 |
| 01***50 | Bolt,(Shim Thickness?Less Than 8mm) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Drawbar
| 01***75 | Bolt | 6 |
| 01***60 | Bolt (Itl) | 1 |
| 01***19 | Nut | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Drawbar (For Scraper)
| 01***75 | Bolt | 6 |
| 01***90 | Bolt (Itl) | 4 |
| 01***60 | Bolt (Itl) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Engine Hood And Guard
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Engine Side Cover
| 01***30 | Bolt,(Not Used With Emergency Str.) | 18 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 8 |
| 01***65 | Bolt | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Equalizer Bar
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Fender
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 21 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Hitch
| 01***60 | Screw | 6 |
| 01***60 | Bolt (Ger) | 1 |
| 01***15 | Nut (Ger) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Marks And Plates (Arabic)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 08***05 | Indicator,Dust (Arabic) | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Marks And Plates (Chinese)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 08***05 | Indicator,Dust (Chinese) | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Marks And Plates (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 08***01 | Indicator,Dust (Japanese And English) | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Marks And Plates (French)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 08***05 | Indicator,Dust (French) | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Marks And Plates (German)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 08***01 | Indicator,Dust (English-German) | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Marks And Plates (Indonesian)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 08***10 | Indicator,Dust | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Marks And Plates (Portuguese)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 08***05 | Indicator,Dust | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Marks And Plates (Spanish)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 08***01 | Indicator,Dust (English And Spanish) | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Operator'S Seat? Fixed Type
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Operator'S Seat? With Oil Damper? Reclining Device
| 01***16 | Bolt,(For Slag Handling) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 5 |
| 01***25 | Bolt - Rear Guard Mounting | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Guard : Under Guard
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 18 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 8 |
Main Clutch And Transmission
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Counter Shaft
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Gear Shift Fork (1/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(With Body Positioner) | 14 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Gear Shift Fork (2/2)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Gear Shift Lever
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***16 | Screw | 1 |
| 01***03 | Nut,(With Joy Stick Steering) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Inertia Brake
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 3 |
| 01***08 | Nut, Regular Hexagon (M10-1.50) | 1 |
| 01***08 | Nut,R.H. Thread | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Main Clutch Booster
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***25 | Bolt,(Without Auto Priming System) | 1 |
| 01***30 | Bolt,(For France Noise Suppression) | 7 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Main Clutch Housing (1/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***50 | Bolt,(With Service Valve R.H.) | 4 |
| 01***40 | Bolt,(With Service Valve R.H.) | 9 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Main Clutch Housing (2/2)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 14 |
| 01***30 | Bolt,(For France Noise Suppression) | 3 |
| 01***65 | Bolt,(For Suction Fan)(4d130-1d) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Main Clutch Lever
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Main Clutch Piping
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Main Clutch Plate
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 10 |
| 01***30 | Bolt,(For France Noise Suppression) | 7 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 12 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Main Shaft
| 01***65 | Hexagon Bolt | 4 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***40 | Bolt (Op) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Power Take Off Shaft
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Transmission Case
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***50 | Bolt | 7 |
| 01***50 | Stud | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Transmission Control Lever
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***40 | Bolt,(With Service Valve R.H.) | 1 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Main Clutch And Transmission : Universal Joint
| 01***55 | Bolt,(For France Noise Suppression) | 8 |
| 01***36 | Washer,Radio Controlled Slag Handling | 8 |
| 14***10 | Universal Joint A | 1 |
Noise Suppression For Ec
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Blade Control Lever (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
| 01***55 | Bolt | 1 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Blade Lift Cylinder (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***35 | Bolt,(For Position Fixing) | 2 |
| 01***50 | Bolt (Kit) | 2 |
| 01***11 | Nut,(With Under Mirror) | 10 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Box (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 12 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 7 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Control Relief Valve Piping (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***50 | Bolt,(With Service Valve R.H.) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 3 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Counter Shaft (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Engine Attaching Parts (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***35 | Bolt | 2 |
| 01***10 | Bolt | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Engine Hood (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 17 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Engine Side Cover (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 26 |
| 01***65 | Bolt | 6 |
| 01***95 | Screw | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Equalizer Bar (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Fender (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Floor (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 12 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 13 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Fuel Tank (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***12 | Bolt,(With Cylinder Cover) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 13 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Fuel Tank Piping (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 3 |
| 07***24 | Hose,(Orange) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Gear Shift Fork (1/2) (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 14 |
| 01***65 | Bolt,(Except Japan) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Gear Shift Fork (2/2) (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Gear Shift Lever (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***16 | Screw,(Sandy And Dusty Terrain S.) | 1 |
| 01***03 | Nut,(With Joy Stick Steering) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Main Clutch Piping (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Main Shaft (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Marks And Plates (English) (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 08***01 | Indicator,Dust Indicator | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Oil Cooler Piping (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Operator'S Seat? With Oil Damper? Reclining Device (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 9 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Power Take Off Shaft (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Radiator (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 64 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
| 01***40 | Bolt,(With Service Valve R.H.) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Radiator Guard (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Radiator Piping And Cover (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Relief Valve (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 6 |
| 07***20 | O-Ring,Relief Valve | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Rops Cab (1/3) (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 4 |
| 01***30 | Bolt,(For France Noise Suppression) | 22 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Rops Cab (2/3) (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt | 4 |
| 01***40 | Bolt | 4 |
| 01***16 | Bolt,(For Slag Handling) | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Rops Cab (3/3) (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***12 | Screw,(With Articulate Indicator) | 4 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 23 |
| 01***16 | Screw,(With Ashtray) | 28 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Rops Mount (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 20 |
| 01***50 | Bolt,(For Tree Pusher) | 12 |
| 01***60 | Bolt, Mount Pole | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Steering Case And Main Frame (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 10 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Steering Clutch Piping (Noise Suppression For Ec) (D60a-8a)(#45330-45374)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 9 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Bolt,(With Service Valve R.H.) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Steering Clutch Piping (Noise Suppression For Ec) (D60a-8a)(#45375-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Steering Lever (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 13 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Tank Cover (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Transmission Case (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***50 | Bolt | 7 |
| 01***50 | Stud | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Under Guard (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 36 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Noise Suppression For Ec : Universal Joint (Noise Suppression For Ec) (D60a-8a)(#45330-)
| 01***55 | Bolt,(For France Noise Suppression) | 8 |
| 01***36 | Washer,Radio Controlled Slag Handling | 8 |
| 14***10 | Universal Joint A | 1 |
Optional Parts
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Additional Rear Lamp
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Air Compressor And Related Parts (For Air Conditioner)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Air Conditioner (For Rops Cab) (1/2)
| 01***10 | Bolt, Mount Flasher | 4 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 8 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Air Conditioner (For Rops Cab) (2/2)
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Air Conditioner Piping (1/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Air Conditioner Piping (2/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Air Duct (For Rops Cab)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 11 |
| 01***12 | Screw,R.H | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Angle Rake Blade
| 01***70 | Bolt,(With Wear Guard) | 4 |
| 01***30 | Bolt | 8 |
| 01***15 | Nut | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Back-Up Alarm And Wiring
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***25 | Screw | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Box And Floor (For Decelerator Pedal)
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 24 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : C-Frame (For Snow Plow)
| 01***45 | Bolt, Fuel Tank Mounting - Front Right | 16 |
| 01***30 | Bolt,R.H. (Kit) | 2 |
| 01***42 | Washer,Spring (For Pedal Steering) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Control Box (For Rops Cab)
| 01***10 | Screw,(For Lighter) | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***20 | Screw - Turn Signal And Parkinglight Mounting | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Decelerator Pedal
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Dirt Protecting Under Guar
| 01***30 | Bolt,(Not Used With Emergency Str.) | 24 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 18 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 24 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Electrical System (For Rops Cab)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 9 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 12 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Exhaust And Precleaner Extension
| 01***40 | Bolt, Mount Master Brake Cylinder | 12 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Head Guard
| 01***35 | Bolt | 24 |
| 01***45 | Bolt,(For Slag Handling) | 8 |
| 01***65 | Bolt - Battery Box | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Hinged Under Guard
| 01***30 | Bolt,(Not Used With Emergency Str.) | 9 |
| 01***40 | Bolt,(With Center Guard) | 2 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 18 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Hood And Engine Side Cover (For Cold Weather)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Hot Water Car Heater (Double)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***65 | Bolt,(With Canvas Or Rops Canopy) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Hydraulic Piping? Able To Avail For Ripper Tool
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Main Clutch Cooler And Valve Piping (1/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 9 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Main Clutch Cooler And Valve Piping (2/2)
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Perforated Engine Side Cover And Reinforced Mask
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 24 |
| 01***65 | Bolt | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Radiator Grill (For Sandy And Dust Terrain) (Except Japan)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
| 01***16 | Washer,Radio Controlled Slag Handling | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Radiator Shutter
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Reinforced Angle Blade And Brace
| 01***50 | Bolt,(For Tree Pusher) | 8 |
| 01***25 | Nut | 2 |
| 01***36 | Washer,Radio Controlled Slag Handling | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Reinforced C-Frame
| 01***45 | Bolt | 16 |
| 01***30 | Bolt,R.H. (Kit) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 16 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Reinforced Under Guard And Front Hook
| 01***30 | Bolt,Radio Controlled Slag Handling | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 18 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Roof Lining (For Rops Cab)
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 14 |
| 01***10 | Screw,(With Air Conditioner) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Rops Cab (1/3)
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 4 |
| 01***30 | Bolt,(For France Noise Suppression) | 22 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Rops Cab (2/3)
| 01***20 | Bolt | 4 |
| 01***40 | Bolt | 4 |
| 01***16 | Bolt,(For Slag Handling) | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Rops Cab (3/3)
| 01***12 | Screw,(With Articulate Indicator) | 4 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 23 |
| 01***16 | Screw,(With Ashtray) | 28 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Rops Canopy
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 14 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 14 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Rops Canopy Mount (For Sweeper And Rear Net)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 14 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 7 |
| 01***50 | Bolt,(For Tree Pusher) | 12 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Rops Canopy Wiring (For Sweeper And Rear Net)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 7 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Rops Canopy? With Sweeper And Rear Net
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Rops Mount
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***50 | Bolt,(For Tree Pusher) | 12 |
| 01***60 | Bolt, Mount Pole | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Snow Plow
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***60 | Bolt | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Straight Blade
| 01***20 | Bolt,(Large Capacity Type) (Std) | 4 |
| 01***35 | Bolt | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Straight Frame
| 01***65 | Bolt,L.H | 4 |
| 01***45 | Bolt, Fuel Tank Mounting - Front Right | 16 |
| 01***65 | Bolt, Mount Radiator To Frame (Bottom) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Straight Rake Blade
| 01***25 | Bolt - Rear Guard Mounting | 4 |
| 01***36 | Washer,Radio Controlled Slag Handling | 4 |
| 04***70 | Pin | 16 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Straight Rake Frame
| 01***65 | Bolt,L.H | 4 |
| 01***65 | Bolt, Mount Radiator To Frame (Bottom) | 2 |
| 01***70 | Bolt,(For Rops) | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Vandalism Protection
| 07***00 | Cap,(For Vandalism Protection) | 1 |
| 07***00 | Cap, Locking - Hydraulic Tank Oil Filler Cap | 1 |
| 09***10 | Lock,(Includes 10 P.C.S.) | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts : Wind Washer (For Rops Cab)
| 01***16 | Bolt (Welded) | 6 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
| 01***19 | Washer,(Not Used With Ventilator) | 6 |
Optional Parts? Tool And Kit
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts? Tool And Kit : Kit
| 01***08 | Washer,Plate Bolt | 1 |
| 04***12 | Pin,Cotter? Shaft | 1 |
| 04***12 | Pin,Cotter? Inertia Brake | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Optional Parts? Tool And Kit : Tool
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***45 | Nozzle, Grease Pump (Non-Flexible Type) | 1 |
Steering System And Final Drive
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Bevel Gear And Shaft
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 16 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Brake (1/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 12 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Brake (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***25 | Bolt,(For Rubber Shoe) | 8 |
| 01***12 | Nut | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Brake Pedal
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Bolt,(For Strengthened Cover) | 4 |
| 01***08 | Nut,L.H. Thread | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Control And Relief Valve Piping
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***50 | Bolt,(With Service Valve R.H.) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 3 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Final Drive Case And Sprocket
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 20 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 66 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Final Drive Gear
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 16 |
| 01***60 | Bolt,Reamer | 24 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Final Drive Shaft And Hub
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 16 |
| 01***45 | Bolt (Op) | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Oil Cooler Piping
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Parking Brake
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 3 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Relief Valve
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 6 |
| 07***20 | O-Ring,Relief Valve | 4 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering And Main Clutch Pump
| 01***10 | Nut,(Fig.F2820-01a3-12) | 8 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 8 |
| 07***00 | Pump Ass'Y,Tandem | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Case And Main Frame (Without Rops Cab)(#.-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 5 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Case And Main Frame(#.-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 5 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Case And Main Frame(#45001-.)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 5 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Clutch
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***24 | Nut | 1 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Clutch Piping(#45001-45374)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Bolt,(With Service Valve R.H.) | 5 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Clutch Piping(#45375-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Control Valve
| 01***16 | Bolt (With Air Heater & Conditioner) | 1 |
| 01***60 | Bolt,(For Japan And Sweden) | 2 |
| 01***50 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Filter
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
| 01***36 | Washer,Radio Controlled Slag Handling | 7 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Lever
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 13 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 10 |
Komatsu : D60a-8(S/N 45001-Up) : Steering System And Final Drive : Steering Lever Linkage
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
Track
Komatsu : D60a-8(S/N 45001-Up) : Track : Carrier Roller(#45001-45408)
Komatsu : D60a-8(S/N 45001-Up) : Track : Carrier Roller(#45409-)
| 01***30 | Bolt,(For Rubber Shoe) | 1 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 16 |
| 01***85 | Bolt | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Track : Front Idler
| 01***30 | Bolt,(For France Noise Suppression) | 12 |
| 01***55 | Bolt,(For Reinforced Type) | 8 |
| 01***13 | Nut,(See Fig.337) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Track : Recoil Spring
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
Komatsu : D60a-8(S/N 45001-Up) : Track : Track Frame
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 12 |
| 01***40 | Bolt (Op) | 24 |
| 01***45 | Bolt (Op) | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Track : Track Frame Cover
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 18 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 4 |
| 01***55 | Bolt,(Tree Pusher Dozer) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Track : Track Roller(#45001-45408)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***65 | Bolt (D65p) | 48 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 12 |
Komatsu : D60a-8(S/N 45001-Up) : Track : Track Roller(#45409-)
| 01***65 | Bolt,(For Shipping) | 48 |
| 01***45 | Washer,(Without R.O.P.S.) | 48 |
| 07***17 | Plug | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Track : Track Shoe (Lubricate Type)
| 07***30 | Plug,(Large) | 74 |
| 07***21 | Plug,(Small) | 74 |
| 14***91 | Shoe,Track | 74 |
Komatsu : D60a-8(S/N 45001-Up) : Track : Track Shoe (Master Pin Type)
Work Equipment
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment : Angle Blade
| 01***70 | Bolt,(With Wear Guard) | 4 |
| 01***30 | Bolt | 8 |
| 01***15 | Nut | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment : C-Frame
| 01***60 | Bolt, Mount Pole | 16 |
| 01***30 | Bolt,R.H. (Kit) | 2 |
| 01***42 | Washer,Spring (For Pedal Steering), Washer-Spring | 1 |
Work Equipment Control System
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Blade Control Lever
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
| 01***55 | Bolt | 1 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Blade Lift Cylinder(#45001-45405)
| 01***50 | Bolt,(With Service Valve R.H.) | 4 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***50 | Bolt,(Shim Thickness?Less Than 8mm) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Blade Lift Cylinder(#45406-)
| 01***35 | Bolt,(For Position Fixing) | 2 |
| 01***50 | Bolt (Kit) | 2 |
| 01***11 | Nut,(With Under Mirror) | 10 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Hydraulic Control Valve (1/2)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
| 01***40 | Bolt,(Not Used With Cab) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Hydraulic Control Valve (2/2)
| 01***40 | Bolt,(Dust And Dirt Protection) | 3 |
| 01***55 | Bolt,(For France Noise Suppression) | 2 |
| 01***15 | Bolt | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Hydraulic Piping (Hydraulic Pump To Tank)
| 01***55 | Bolt, Mount Tube To Switch Pump | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 2 |
| 01***75 | Bolt,(For Adjusting) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Hydraulic Piping (Hydraulic Tank To Lift Cylinder) (1/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***90 | Bolt, Fan Mounting | 8 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Hydraulic Piping (Hydraulic Tank To Lift Cylinder) (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 14 |
| 01***11 | Nut,(With Under Mirror) | 6 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Hydraulic Pump
| 04***20 | Ring, Snap | 1 |
| 07***62 | Seal (Kit) | 1 |
| 07***10 | Plate | 1 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Hydraulic Tank (1/2)
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
Komatsu : D60a-8(S/N 45001-Up) : Work Equipment Control System : Hydraulic Tank (2/2)
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***90 | Bolt (M10-1.50x90) | 1 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 1 |
D60A-8(S/N 45001-UP) serial number reference
On this Series-8 Komatsu dozer the PIN/serial plate is riveted to the machine frame - commonly reported locations include the rear of the main frame, the transmission/clutch housing area, or a plate inside the cab, and reports vary by source, so check your operator's manual diagram for the exact location on your unit. Unlike later Komatsu machines, there is no 3-letter code ahead of the number: read the plate as a straight numeric serial, and if it falls at 45001 or higher it belongs to this D60A-8(S/N 45001-UP) parts/service break. Match the full serial against the shop manual's effective range rather than looking for a prefix letter.
| Prefix | Identifies | Notes |
|---|---|---|
| 45001-UP | D60A-8 base range | This Series-8 Komatsu dozer does not use a 3-character alpha PIN prefix. Production starts at plain numeric serial 45001 and runs upward with no letter code ahead of the digits, so the number alone is what parts and service lookups key off. The same 45001-UP numeric block is shared across the D60A-8, D60E-8, D60P-8, D60PL-8, D65A-8, D65E-8, D65P-8, D65E-8A and D65P-8A machines covered by one factory shop manual. Engine fitted to the D60A-8 in this range is the naturally aspirated 6D125-1 six-cylinder diesel, rated around 119kW (160HP). The A suffix denotes the standard 6-roller track-frame configuration, as distinct from the E-suffix sibling in the same serial block, which uses a 7-roller track frame and a higher-output tune of the same engine family (about 127kW/170HP), and the P/PL-suffix siblings, which use a wider 9-roller swamp/LGP undercarriage. Confirm with dealer if a sub-range split (e.g. an early-vs-late running change within 45001-UP) applies to your specific unit, since no source documented one. |
Frequently asked questions
What engine powers the Komatsu D60A-8 (S/N 45001-UP)?
It uses a naturally aspirated Komatsu 6D125-1 inline-six diesel producing roughly 119 kW (160 hp) at 1850 rpm, with mechanical fuel injection and no electronic engine controls.
What is the operating weight of the Komatsu D60A-8 (S/N 45001-UP)?
Operating weight is approximately 15,990 kg (35,252 lb) as equipped with the standard S-type dozer blade, varying slightly by blade and configuration.
What replaced the Komatsu D60A-8?
Komatsu carried this dozer architecture forward into later Series dozers as the model line evolved; exact succession varies by market and configuration, so confirm the specific follow-on model with your dealer.
What D60A-8(S/N 45001-UP) owners discuss
What engine runs in this dozer, and what quirks come up with it?
It carries the naturally aspirated Komatsu 6D125-1 inline-six diesel, roughly 119 kW (160 hp) gross at 1850 rpm, with mechanical (jerk-pump style) fuel injection and no electronic engine controls. Owners and mechanics note the injection pump and injectors drift out of calibration with age and heat rather than throwing any warning light, so rough running, harder cold starts, or white smoke at startup and under load is usually the first sign of trouble. A leaking injector can wash down a cylinder, which shows up as diesel-diluted engine oil and a fuel smell in the crankcase rather than a smoking exhaust alone. Diagnosis leans on pump timing checks and a compression test rather than a scan tool. Have your dealer verify injection pump timing and injector calibration before doing major engine work.
The dozer pulls to one side or won't steer cleanly - what's the usual cause?
This chassis uses lever-operated, multi-disc steering clutches with separate brake bands per side, not a hydrostatic joystick system. The complaint owners report most is a machine that pulls or refuses to steer smoothly to one track, and it's traced almost every time to an out-of-adjustment brake band or trapped air in the steering clutch circuit after a filter or line service. The fix is adjusting band tension at the rear access cap and bleeding the clutch housing at the filter until the oil runs air-free. An over-tightened band can bind the clutch pack and mimic a much bigger driveline failure, so don't jump straight to a transmission teardown. Have your dealer verify clutch and brake band adjustment before condemning any driveline component.
What undercarriage wear pattern should owners expect on this machine?
Standard configuration runs six track rollers and two carrier rollers per side with shoes in the roughly 510 mm (20 in) width class. As with most dozers of this age still working, sprockets, track rollers, and idlers wear out faster than the track links themselves and are the components most often rebuilt or replaced on these chassis. Ground conditions (rock versus dirt, grade work versus ripping) affect wear rate more than raw hour count. Check roller and idler seals for grease/oil weeping and measure shoe and link wear rather than going by hours alone. Have your dealer verify remaining undercarriage life with a proper wear gauge before budgeting a rebuild.
There's a whine or rattle from the hydraulic pump area on cold start - is that normal?
Two different things get reported here, and it pays to tell them apart. Thick, cold hydraulic oil causes a whine that quiets down within a few minutes as the system warms - that's normal and not a concern. A worn PTO damper disk (a clutch-like disk with cushioning springs that sits between the engine and the pump drive) causes a similar noise that does NOT go away with warmup and tends to get louder under load. Mechanics check this by draining a sample from the damper housing: oil that's dark, burnt-smelling, or overfull points to the damper rather than the pump itself. Have your dealer verify the damper and pump drive before replacing the hydraulic pump.
What transmission does this dozer use, and are there known failure patterns?
It runs a power-shift transmission off a torque converter, with factory literature listing 5 forward and 4 reverse speeds for this configuration (exact gear counts can vary by source and configuration, so treat this as approximate). The transmission and torque converter family is shared with larger sibling dozers covered under the same factory documentation, so troubleshooting knowledge and parts commonality carry across those models. No widely reported chronic transmission failure pattern turned up for this specific machine beyond ordinary wear tied to hours and neglected oil changes. Have your dealer verify transmission oil condition and modulation pressure, especially on a machine being considered for purchase.
Does this dozer have electronic sensors or fault codes to worry about?
No. This is an all-mechanical 1980s machine - naturally aspirated engine, mechanical injection, no ECU, and nothing resembling a modern diagnostic sensor suite. Reported electrical complaints are the ordinary stuff for a machine this age: corroded grounds and connectors, gauges (temperature/pressure) reading inaccurately, a tired starter or alternator, and wiring insulation cracking from heat-cycling near the engine bay. There's no fault-code system to lean on, so electrical troubleshooting is done with a multimeter and wiring diagram, not a scan tool. Have your dealer verify charging system output and starter draw if gauges or cranking behavior seem off.
What should a buyer check before purchasing a used unit?
Start the engine cold and watch for white smoke at startup and under load, and pull a compression check if smoke or hard starting shows up - that points to injection pump or injector wear on this mechanically injected engine. Cycle the steering both directions and confirm even, responsive clutch and brake action with no pulling or binding. Walk the undercarriage and check sprocket, roller, idler, and shoe wear rather than trusting the hour meter alone. Listen to the hydraulic pump on cold start and again once warm, and pull a sample from the PTO damper housing if the noise persists warm. Check transmission oil condition and confirm smooth shifting through the gear range. Finally, confirm the machine's actual configuration against its serial plate - the factory documentation for this serial range covers several close siblings sharing the same chassis and drivetrain, so match the paperwork to the machine in front of you. Have your dealer verify compression, hydraulic pressure, and steering clutch condition with a full inspection before finalizing any purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific D60A-8(S/N 45001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.