Komatsubulldozermedium (d40 - d75)
Komatsu D58E-1(S/N 80888-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu D58E-1 (S/N 80888-UP) is a mid-size crawler dozer in the roughly 11 to 12 metric ton operating class, built around the Komatsu 6D125E inline six-cylinder diesel paired with a 3-speed powershift transmission and torque converter. Komatsu built the D58 series from the late 1980s into the 1990s and 2000s depending on the source, positioning it between the earlier D50/D53/D57 family and the mid-size D61 class that followed it in Komatsu's lineup. The base D58E-1 shipped as a straight dozer, with the D58E-1A offered as a tilt-dozer and the D58E-1B as a power angle-tilt dozer; Komatsu also sold a wider-track, lower-ground-pressure D58P chassis for swamp and soft-ground work alongside the standard E-chassis machine.
Across the D58E and D58P family, the main differences are chassis width and blade linkage rather than engine changes: the standard E-chassis dozer runs narrower tracks with a straight, tilt, or angle-tilt blade option, while the P-chassis swamp version widens track gauge and shoe size to cut ground pressure for wetland and reclamation work. All variants share the same 6D125E engine, transmission, and final drive architecture, which keeps parts interchange high across the family and simplifies sourcing for shops supporting mixed fleets. In the used and parts market today, the D58E-1 remains relevant mainly as a rebuildable mid-size dozer for land-clearing, grading, and utility work, valued by owners who want straightforward powershift mechanicals without the cost of a modern electronically controlled machine.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu D58E-1(S/N 80888-UP) specifications
Engine
| Engine model | Komatsu 6D125E, water-cooled diesel, 6 cylinders (catalogued by some sources under the 6D125-1 series designation for this range) |
| Piston displacement | 11.04 L (674 cu in) |
| Aspiration / emissions tier | Not documented for this exact serial range in available public sources — this is a pre-Tier engine era model (production span 1988 to 2002); verify with your dealer |
| Gross / net flywheel power | Not documented for this exact serial range in available spec sheets — verify with your dealer or factory spec sheet |
Weights
| Operating weight | 10,850 to 11,780 kg (23,920 to 25,970 lb) — figures vary by configuration/source; treat as a range rather than a single fixed value |
| Base tractor weight (no attachments) | Not documented separately for this exact serial range in available sources |
Dimensions
| Overall length with blade | 3.79 to 3.81 m (12.46 to 12.50 ft), varies by configuration/source |
| Width over tracks | 2.34 to 2.35 m (7.68 to 7.70 ft) |
| Height to cab top | 2.15 to 2.16 m (7.04 to 7.10 ft) |
| Track length on ground | 2.37 to 2.47 m (7.76 to 8.10 ft), varies by configuration/source |
| Track gauge | 1.88 to 1.95 m (6.17 to 6.40 ft), varies by configuration/source |
| Standard track shoe width | 460 mm (18.1 to 18.2 in); a wider shoe option near 560 mm appears in one source but is unconfirmed for this exact serial range |
| Ground clearance | Not documented for this exact serial range in available public sources — verify with your dealer |
Performance
| Travel speed, forward (3-speed powershift) | 0 to 9.8 km/h (0 to 6.1 mph) top gear |
| Travel speed, reverse (3-speed powershift) | 0 to 11.9 km/h (0 to 7.4 mph) top gear |
| Maximum drawbar pull | Not documented for this exact serial range in available public sources — verify with your dealer or factory spec sheet |
| Ground pressure | Not documented for this exact serial range in available public sources — varies with shoe width and configuration; verify with your dealer |
| Gradeability | Not documented for this exact serial range in available public sources |
Blades
| Blade configuration for this base designation | Available sources do not cleanly separate blade capacity for the base D58E-1(S/N 80888-UP) from its Straight Tilt and Power Angle Tilt siblings covered by the same shop manual family. Blade width/capacity figures are not confirmed specifically for this base designation — verify blade type and capacity with your dealer or the factory spec sheet |
Service capacities summary
| Fuel tank | 250 L (66.1 US gal) |
| Engine oil (refill) | 26 L (6.87 US gal / 5.72 UK gal) |
| Cooling system capacity | Not documented for this exact serial range in available public sources — verify with your dealer |
| Hydraulic tank capacity | Not documented for this exact serial range in available public sources — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
D58E-1(S/N 80888-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (w/ filter) | Total (pan) 63 L (16.64 US gal / 13.86 UK gal); refill at oil/filter change 26 L (6.87 US gal / 5.72 UK gal) | Komatsu genuine engine oil (EO), API classification CD (CC acceptable if oil-change interval is halved). By ambient temp: below -20C use SAE10W; -20C to 0C use SAE10W or SAE10W-30; 0C to 10C use SAE10W-30 or SAE15W-40; above 10C use SAE30 or SAE15W-40. When starting below 0C, always run SAE10W, 10W-30, or 15W-40 even if daytime temp climbs toward 10C. Single-grade and multigrade oils may be mixed if the single-grade matches the ambient band. Change interval halves above 0.5% fuel sulfur content, quarters above 1.0%. |
| Cooling system | 57 L (15.06 US gal / 12.54 UK gal) | Tap water as base coolant; add Komatsu antifreeze/supercoolant per ambient temperature. If only river or well water is available, check with your Komatsu distributor before use. |
| Fuel tank | 250 L (66 US gal / 55 UK gal) | Diesel fuel meeting ASTM D975 No. 1 (or equivalent low-sulfur diesel); keep sulfur content under 0.5% where possible to protect standard oil-change intervals. |
| Transmission case (incl. torque converter) | 34 L (8.98 US gal / 7.48 UK gal) | Komatsu genuine transmission/hydraulic oil (TO). By ambient temp: below -10C use SAE10W; -10C to 30C use SAE10W or SAE15W; above 30C use SAE15W or SAE30. |
| Steering clutch case (incl. bevel gear case) | 65 L (17.17 US gal / 14.30 UK gal) | Same Komatsu TO transmission/hydraulic oil and viscosity bands as the transmission case. |
| Final drive case (each side) | 13 L (3.43 US gal / 2.86 UK gal) each side for this D58E-1 chassis; sibling D58E-1B and D58P-1 units use different capacities under the same shared manual, not applicable to this serial range. | Same Komatsu TO gear/transmission oil and viscosity bands as the transmission case. |
| Hydraulic system (tank) | 92 L (24.31 US gal / 20.24 UK gal) | Komatsu genuine hydraulic oil (TO/HO), same viscosity bands as transmission oil: SAE10W below -10C, SAE10W or 15W from -10C to 30C, SAE15W or 30 above 30C. |
| Damper case | 1.3 L (0.34 US gal / 0.29 UK gal) | Same Komatsu TO oil and viscosity bands as the transmission case. |
| Pivot shaft / grease points (equalizer bar, track and idler pins, etc.) | Per-point application, no reservoir capacity specified | Komatsu Genuine Grease, multipurpose lithium-base (NLGI 2) for general chassis grease points; molybdenum disulphide grease (LM-G type) for heavy-load pivot and equalizer points where the OMM calls for it. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu D58E-1(S/N 80888-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the D58E-1(S/N 80888-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
On the D58E-1 (S/N 80888-UP), sample engine oil, transmission/torque converter oil, and final drive oil at every scheduled change to track the 6D125E's wear trend before it reaches the steering clutch and bevel gear case. Watch coolant condition closely if running non-permanent antifreeze, since the factory schedule forces a change at 1000 hours regardless of appearance. Trend hydraulic tank oil condition between filter changes to catch pump or cylinder wear on the blade lift circuit early, before it shows up as slow blade response.
Corrective & Common Repairs
Common corrective work on this dozer centers on the steering clutch and bevel gear case, the transmission/torque converter unit, and the final drives, all part of the powershift-era Komatsu 3-speed drivetrain. Brake pedal travel drifts out of spec on high-hour units and needs regular adjustment. Equalizer bar pin and blade linkage bushings wear from constant grading loads. Fuel filter and water separator service protects the injection pump, a frequent failure point on aging 6D125E fuel systems left unserviced.
Overhaul & Rebuild Points
Major rebuild planning on the D58E-1 (S/N 80888-UP) tracks the powertrain: engine valve clearance and vibration damper condition get checked at 2000 hours, a useful marker for scheduling top-end work on the 6D125E. Transmission and final drive cases carry their own oil-change and strainer-cleaning cycle, which gives early warning for clutch pack or gear inspection. Undercarriage components wear steadily under this dozer's operating weight and are worth inspecting alongside any final drive teardown, not on their own separate schedule.
Seasonal & Environment Servicing
Coolant servicing on the D58E-1 (S/N 80888-UP) follows a seasonal split: permanent antifreeze gets cleaned and changed each autumn or at 2000 hours, whichever comes first, while non-permanent antifreeze needs cleaning each spring and autumn with a change every 1000 hours, plus corrosion-resistant treatment in hard-water regions. In freezing climates, check battery and starting-aid condition before cold starts. In dusty or coastal environments, protect electrical connectors from corrosion and check the dust indicator more often than the standard interval.
D58E-1(S/N 80888-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 09019-08035 | Wrench,Filter (For Add. Fuel Filter) | Fuel system service | Check fitment → |
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| 09637-30163 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 09637-30263 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
| 09637-81163 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
D58E-1(S/N 80888-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Charge lamp (steady red, engine running) | Alternator circuit not charging | Worn or slipping V-belt, faulty alternator, or loose/corroded wiring connection | Stop engine, check V-belt tension and condition, inspect alternator wiring before restarting |
| Engine oil pressure lamp (steady red, engine running) | Lubricating oil pressure below safe level | Low oil level, clogged oil filter, worn oil pump, or failed pressure sender | Shut engine down immediately, check oil level and filter, do not restart until cause is found |
| Heater (intake air preheat) signal lamp | Electric intake air heater is energized for cold-start assist | Normal cold-start operation; lamp glows roughly 20 to 30 seconds after switch is held at HEAT. Not a fault by itself - if it never glows or the engine still won't start cold, suspect the heater relay or element | Hold start switch at HEAT until lamp glows, then crank; if no glow, check heater fuse/relay and glow element |
| Coolant temperature gauge in red zone | Engine coolant overheating | Low coolant, clogged radiator core/fins, slipping fan belt, or faulty thermostat | Idle engine to cool, check coolant level and radiator for debris once safe, inspect belt and thermostat |
| Air cleaner restriction indicator | Air intake filter element is clogged, restricting airflow to the turbocharger/engine | Dust-loaded primary air filter element | Service or replace the air filter element, reset the restriction indicator |
| Steering clutch/brake slippage (no lamp, mechanical symptom) | Loss of steering or braking control on one track | Worn steering clutch discs or brake bands, or low clutch/brake oil pressure | Check clutch and brake oil level/pressure, inspect clutch discs and brake bands for wear |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
D58E-1(S/N 80888-UP) attachments & work tools
Blades
This non-suffix D58E-1 (S/N 80888-UP) is the base straight-dozer chassis in its family: fixed straight blade, no power tilt and no angle function, distinct from the -1A Straight Tilt and -1B Power Angle Tilt (PAT) siblings built on the same 80888-up serial break. For its roughly 11 to 13 t class a straight blade in the 3.0 to 3.3 m width and 3.0 to 4.0 m3 capacity range is typical of the platform, but an exact factory-published width/capacity tied specifically to this non-suffix unit is not confirmed in available literature — check the operation and maintenance manual for this S/N range before ordering a blade.
Rippers
Both a multi-shank (2 to 3 tooth) parallelogram ripper and a single-shank giant ripper were offered across the D58 platform; the multi-shank tool suits shallow scarifying and frost-breaking, the single-shank tool handles harder rock, cemented material and root pulling. Ripper weight for this weight class generally falls roughly 1.5 to 2.5 t depending on shank count and beam length; a factory weight figure specific to the D58E-1's own ripper option was not found and should be confirmed against the parts book.
Winches
A PTO-driven, mechanically clutched cable-control winch is a factory-fit option on the straight-blade D58E-1 chassis, mounted at the rear frame opening in place of a ripper. Class-wide winch compatibility charts for Komatsu dozers do not break the D58 out as its own line item, so treat winch fitment as class-typical rather than confirmed to this exact serial range, and verify PTO gear ratio and drum capacity with the dealer.
Drawbars/Counterweights
When neither ripper nor winch occupies the rear opening, the D58E-1 takes a simple pin-type drawbar bracket at that location. A bolt-on rear counterweight block is common practice on straight-blade dozers of this size to balance front blade loading and hold correct track-frame weight distribution, standard across the D58 platform rather than unique to this variant.
Cab/ROPS guarding
This S/N range is factory-available with a ROPS cab (confirmed by an air-conditioner kit specified 'for ROPS cab' against this exact serial range). For forestry and waste-handling duty, bolt-on FOPS screen guarding over the front windshield and roof, a rear window screen, and an underbelly guard are the typical dealer/factory-fit additions for this class to protect glass and the ROPS structure from falling debris and punctures.
Hydraulic arrangement (front/rear)
Blade lift runs off the machine's main implement hydraulic pump and valve bank at the front of the machine. A rear-mounted ripper draws from the same hydraulic circuit through an added ripper control valve. A PTO cable-control winch, where fitted, is mechanically driven off the transmission rather than hydraulically, so the winch and the blade/ripper hydraulic circuits do not compete for pump flow on this platform.
All D58E-1(S/N 80888-UP) assemblies by section
Every catalogued assembly group for the Komatsu D58E-1(S/N 80888-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
6d125e-2g-5 S/N 60721-Up
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Air Cleaner (High Altitude Spec.)(#64065-)
| 01***40 | Bolt,(Dust And Dirt Protection) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Air Cleaner Cap (High Altitude Spec.)(#64065-)
| 60***30 | Cap | 1 |
| 61***40 | Pipe,(Sandy And Dusty Spec.) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Air Cleaner Cap(#64065-81733)
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Air Cleaner Cap(#81734-)
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Air Cleaner(#64065-)
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Air Intake Manifold (High Altitude Spec.)(#64812-)
| 01***30 | Bolt,(With Body Positioner) | 16 |
| 01***55 | Bolt,(See Service News) | 5 |
| 01***10 | Bolt,(With Joy Stick Steering) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Air Intake Manifold(#64065-)
| 01***30 | Bolt,(With Body Positioner) | 15 |
| 01***55 | Bolt,(See Service News) | 5 |
| 01***10 | Bolt,(With Joy Stick Steering) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Air Vent(#64065-75182)
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 12 |
| 07***10 | Screw, Banjo Connector (M10-1.25x20) | 6 |
| 61***60 | Tube,Air Vent | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Air Vent(#75183-)
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 12 |
| 07***10 | Screw, Banjo Connector (M10-1.25x20) | 6 |
| 61***60 | Tube,Air Vent | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Alternater (35a) (With Hardening Pulley) (Sandy And Dusty Spec.) (Inner Parts)(#64065-)
| 60***50 | Alternator A. (35a) | 1 |
| 60***51 | Alternator A. (35a) | 1 |
| KD***50 | Bracket,Rear | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Alternater (35a) (With Hardening Pulley) (With Safety Cover) (Sandy And Dusty Spec.) (Inner Parts)(#64065-)
| 60***50 | Alternator A. (35a) | 1 |
| 60***51 | Alternator A. (35a) | 1 |
| KD***50 | Bracket,Rear | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Alternater (35a) (With Non Hardening Pulley) (Cold Terrain (A) Spec.) (Inner Parts)(#64065-)
| 60***50 | Alternator A. (35a) | 1 |
| 60***51 | Alternator A. (35a) | 1 |
| KD***50 | Bracket,Rear | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Alternater (35a) (With Non Hardening Pulley) (With Safety Cover) (Inner Parts)(#64065-)
| 60***50 | Alternator A. (35a) | 1 |
| 60***51 | Alternator A. (35a) | 1 |
| KD***50 | Bracket,Rear | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Alternater Mounting (35a) (With Hardening Pulley) (Sandy And Dusty Spec.)(#64065-)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***75 | Bolt - Tube Mounting | 1 |
| 01***55 | Screw | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Alternater Mounting (35a) (With Hardening Pulley) (With Safty Cover) (Sandy And Dusty Spec.)(#64065-)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***75 | Bolt - Tube Mounting | 1 |
| 01***55 | Screw | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Alternater Mounting (35a) (With Non Hardening Pulley) (Cold Terrain (A) Spec.)(#64065-)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***75 | Bolt - Tube Mounting | 1 |
| 01***55 | Screw | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Alternater Mounting (35a) (With Non Hardening Pulley) (With Safety Cover)(#64065-)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***75 | Bolt - Tube Mounting | 1 |
| 01***55 | Screw | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Blind Plug (Without Water Temperature Sensor)(#64065-)
| 07***15 | Plug,(Used When Without Heater) | 1 |
| 07***15 | Plug,(For Without Air Compressor) | 1 |
| 28***70 | Plug,(For Shipping) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Block Heater(#64065-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***16 | Washer,Radio Controlled Slag Handling | 1 |
| 60***20 | Clip,(Large Capacity Type) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Camfollower Cover(#64065-)
| 07***20 | Clamp, Spring Hose | 1 |
| 07***63 | Hose | 1 |
| 61***90 | O-Ring,Breather | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Camshaft(#61582-75757)
| 01***22 | Capscrew | 2 |
| 04***25 | Key, Plain Woodruff | 1 |
| 04***12 | Ring,Snap (For Ripper) | 12 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Camshaft(#75758-)
| 01***22 | Capscrew | 2 |
| 04***25 | Key, Plain Woodruff | 1 |
| 04***12 | Ring,Snap (For Ripper) | 12 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Caution Plate (English)(#81315-)
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Caution Plate (French)(#81315-)
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Caution Plate (German)(#81315-)
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Caution Plate (Spanish)(#81315-)
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cooling Fan (Noise Suppression Spec.)(#64065-)
| 01***30 | Bolt,(With Body Positioner) | 12 |
| 60***40 | Fan,Cooling | 1 |
| 61***90 | Spacer | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cooling Fan (Reversible Fan)(#64065-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***40 | Bolt (Op) | 6 |
| 60***40 | Fan,Reversible | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cooling Fan(#64065-)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***40 | Bolt (Op) | 6 |
| 60***40 | Fan,Cooling | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Corrosion Resistor(#64065-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 02***25 | Bolt,(Cold Weather Spec.) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Crank Pulley (Hardening Pulley)(#64065-)
| 01***15 | Bolt | 1 |
| 01***20 | Bolt | 5 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Crank Pulley (Non Hardening Pulley)(#64065-)
| 01***15 | Bolt | 1 |
| 01***20 | Bolt | 5 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Crankshaft(#61779-67073)
| 61***10 | Bearing, Main (Standard) | 7 |
| 61***50 | Bearing, Thrust Assembly (Standard) | 1 |
| 61***10 | Bearing, Main (1.00mm Undersize) | 7 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Crankshaft(#67074-)
| 61***10 | Bearing, Main (Standard) | 7 |
| 61***50 | Bearing, Thrust Assembly (Standard) | 1 |
| 61***10 | Bearing, Main (1.00mm Undersize) | 7 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block (1/2) (High Altitude Spec.)(#64812-76795)
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 14 |
| 04***14 | Pin, Dowel | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block (1/2) (With Block Heater)(#64065-76795)
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 14 |
| 04***14 | Pin, Dowel | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block (1/2)(#64065-76795)
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 14 |
| 04***14 | Pin, Dowel | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block (2/2) (High Altitude Spec.)(#64812-76795)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 07***30 | Ring, Seal - Between Sections | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block (2/2) (With Block Heater)(#64065-76795)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 07***30 | Ring, Seal - Between Sections | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block (2/2)(#64065-76795)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 07***30 | Ring, Seal - Between Sections | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block Blind Cover And Plug (Electrical Coolant Spec.)(#76796-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block Blind Cover And Plug (High Altitude Spec.)(#76796-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block Blind Cover And Plug(#76796-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block Gasket Kit(#64065-)
| 07***21 | O-Ring,Water Piping | 1 |
| 07***30 | Ring, Seal - Between Sections | 1 |
| 07***15 | O-Ring,Relief Valve | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Block(#76796-)
| 01***12 | Bolt,(Without Air Compressor Type) | 2 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 14 |
| 04***14 | Pin, Dowel | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Head Gasket Kit(#64065-)
| 07***65 | O-Ring,Cylinder Block | 6 |
| 07***12 | Gasket,Mechanical Pump Piping | 12 |
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 12 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Head(#61779-67991)
| 01***20 | Bolt (M10-1.75x120) | 6 |
| 04***20 | Pin,Dowel (Welded) | 2 |
| 07***08 | Plug,(Without Lock-Up), Plug | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Cylinder Head(#67992-)
| 01***20 | Bolt (M10-1.75x120) | 6 |
| 04***20 | Pin,Dowel (Welded) | 2 |
| 07***08 | Plug,(Without Lock-Up), Plug | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Damper(#64065-)
| 01***50 | Bolt,For Weight Adjusting Bolt | 6 |
| 61***20 | Plate | 1 |
| 61***00 | Damper Ass'Y | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Engine Mounting(#64065-)
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 4 |
| 01***50 | Bolt,(Shim Thickness?Less Than 8mm) | 4 |
| 01***55 | Bolt,(Tree Pusher Dozer) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Exhaust Manifold (High Altitude Spec.)(#64812-)
| 01***80 | Screw | 18 |
| 07***08 | Plug,(Without Auto Priming System) | 1 |
| 61***20 | Spacer,(For Shipping) | 18 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Exhaust Manifold (With Safety Cover)(#64065-79012)
| 01***20 | Bolt | 4 |
| 01***25 | Bolt,Joint | 2 |
| 01***45 | Capscrew | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Exhaust Manifold (With Safety Cover)(#79013-)
| 01***20 | Bolt | 4 |
| 01***25 | Bolt,Joint | 2 |
| 01***45 | Capscrew | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Exhaust Manifold(#61779-)
| 01***80 | Screw | 18 |
| 07***08 | Plug,(Without Auto Priming System) | 1 |
| 61***20 | Spacer,(For Shipping) | 18 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Exhaust Pipe (502.9mm)(#81510-)
| 01***11 | Nut (M14-1.50 Thd), Nut; Was 01582-01411 | 2 |
| 61***20 | Clamp | 1 |
| 61***70 | Washer,(Spark Arrester Spec.) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Exhaust Pipe (Black Exhaust Pipe? 1013mm)(#81734-)
| 01***11 | Nut (M14-1.50 Thd), Nut; Was 01582-01411 | 2 |
| 61***20 | Clamp | 1 |
| 61***90 | Tube, Exhaust Stack (Glass Wool) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Exhaust Pipe (High Altitude Spec.)(#81734-)
| 01***11 | Nut,(Spark Arrester Spec.) | 2 |
| 01***23 | Plain Washer | 2 |
| 66***80 | Pipe,Exhaust | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Exhaust Pipe (Silver Exhaust Pipe? 1013mm) (With Rain Cap)(#81510-)
| 01***11 | Nut (M14-1.50 Thd), Nut; Was 01582-01411 | 2 |
| 61***20 | Clamp | 1 |
| 61***70 | Washer,(Spark Arrester Spec.) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fan Drive (Noise Suppression Spec.)(#64065-)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***40 | Bolt (Op) | 2 |
| 01***95 | Capscrew | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fan Drive(#64065-)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***40 | Bolt (Op) | 2 |
| 01***95 | Capscrew | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fan Pulley (For 35a Alternator) (Ec? Dynamic Noise Suppression)(#72957-)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 04***70 | V-Belt Set,(Noise Suppression Spec.) | 1 |
| 61***30 | Pulley,Hardening | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fan Pulley (Hardening Pulley) (Sandy And Dusty Spec.) (For 35a Alternator)(#64065-)
| 04***67 | V-Belt Set,(Tropical Sandy? Dusty Spec.) | 1 |
| 61***61 | Pulley? Hardening | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fan Pulley (Non Hardening Pulley) (For 35a Alternator)(#64065-)
| 04***67 | V-Belt Set,(Tropical Sandy? Dusty Spec.) | 1 |
| 61***21 | Pulley?Non Hardening,Non Hardening | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fan Pulley (Non Hardening Pulley) (Noise Suppression Spec.) (For 35a Alternator)(#64065-)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 04***69 | V-Belt Set,Fan | 1 |
| 61***30 | Pulley?Non Hardening | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Flywheel Housing(#64065-)
| 01***65 | Bolt - Battery Box | 2 |
| 01***50 | Capscrew | 6 |
| 01***65 | Capscrew | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Flywheel(#64065-)
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Front Cover Mounting(#75758-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 8 |
| 01***75 | Bolt (M10-1.50x75) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Front Cover(#64065-75757)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 8 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Front Cover(#75758-)
| 09***50 | Liquid Gasket, Lg-7, 150g | 0 |
| 61***30 | Seal? Front (K2) | 1 |
| 61***80 | Cover,Front | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Filter(#64065-)
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***16 | Washer,Radio Controlled Slag Handling | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Injection Pump (Coupling) (Inner Parts)(#64065-)
| ND***10 | Flange,Coupling | 1 |
| ND***50 | Bolt | 1 |
| ND***40 | Bolt | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Injection Pump (Feed Pump) (Inner Parts)(#64065-)
| ND***40 | Washer? 1mm,Plate | 1 |
| ND***70 | Washer,Union | 4 |
| ND***10 | Spring, Check Valve | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Injection Pump (Governor) (1/2) (Inner Parts)(#64065-)
| ND***40 | Plate,Thrust | 1 |
| ND***40 | Plug,Screw | 1 |
| ND***10 | Adapter | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Injection Pump (Governor) (2/2) (Inner Parts)(#64065-)
| ND***20 | Washer? 1.0mm,Cover Plate | 2 |
| ND***90 | Seal,Oil | 1 |
| ND***40 | O-Ring | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Injection Pump (Pump) (1/2) (Inner Parts)(#64065-)
| 61***20 | Injection Pump Ass'Y | 1 |
| 61***21 | Injection Pump Ass'Y | 1 |
| ND***20 | Body Ass'Y | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Injection Pump (Pump) (2/2) (Inner Parts)(#64065-)
| ND***81 | Cover | 1 |
| ND***60 | Element,Pump | 6 |
| ND***11 | Shim? 1.7mm | 0 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Injection Pump Drive(#61582-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***14 | Nut (Itl) | 1 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Injection Pump Mounting(#64065-)
| 01***75 | Capscrew | 4 |
| 61***10 | Washer,Spring | 4 |
| (6***0) | Injection Pump Ass'Y,(See Fig.A4010-B3l1) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Injection Pump Piping(#61779-)
| 01***30 | Screw | 4 |
| 01***55 | Bolt,(See Service News) | 4 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Fuel Return(#64065-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Head Cover Related Parts(#75758-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Head Cover(#64065-75757)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Head Cover(#75758-)
| 01***16 | Washer,Radio Controlled Slag Handling | 24 |
| 61***11 | Cover,Head? No.2?3?4?5?6 | 5 |
| 61***41 | Head Cover Ass'Y,Head? No.1 | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Heater Signal(#64065-81509)
| 60***30 | Signal,Engine Pre Heater | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Heater Signal(#81510-)
| 60***30 | Signal,Engine Pre Heater | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Heater Switch (High Altitude Spec.)(#64812-)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***55 | Bolt,(See Service News) | 1 |
| 01***10 | Washer,(For 35a Alternator) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Heater Switch(#64065-)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***55 | Bolt,(See Service News) | 1 |
| 01***10 | Washer,(For 35a Alternator) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Idler Gear(#60863-)
| 01***60 | Screw | 1 |
| 01***60 | Capscrew | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Injection Nozzle(#64065-81733)
| 01***45 | Bolt, Mount Divider Valve | 12 |
| 07***65 | O-Ring,Cylinder Block | 6 |
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 12 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Injection Nozzle(#81734-)
| 01***45 | Bolt, Mount Divider Valve | 12 |
| 07***65 | O-Ring,Cylinder Block | 6 |
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 12 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Muffler (Black Exhaust Pipe? 1013mm) (With Safety Cover)(#64065-81733)
| 01***12 | Bolt - Front Cover Mounting | 15 |
| 01***40 | Bolt (Op) | 4 |
| 01***25 | Bolt,Joint | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Muffler (Black Exhaust Pipe? 1013mm)(#64065-81733)
| 01***40 | Bolt (Op) | 4 |
| 01***25 | Bolt,Joint | 4 |
| 01***30 | Bolt | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Muffler (Exhaust Pipe? 502.9mm) (With Safety Cover)(#64065-71733)
| 01***12 | Bolt - Front Cover Mounting | 15 |
| 01***40 | Bolt (Op) | 4 |
| 01***25 | Bolt,Joint | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Muffler (Exhaust Pipe? 502.9mm)(#64065-81733)
| 01***40 | Bolt (Op) | 4 |
| 01***25 | Bolt,Joint | 4 |
| 01***30 | Bolt | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Muffler (High Altitude Spec.)(#64065-81733)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***40 | Capscrew | 4 |
| 01***55 | Screw | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Muffler (High Altitude Spec.)(#81734-)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***40 | Capscrew | 4 |
| 01***55 | Screw | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Muffler (Silver Exhaust Pipe? 1013mm) (With Rain Cap)(#64065-81733)
| 01***40 | Bolt (Op) | 4 |
| 01***25 | Bolt,Joint | 4 |
| 01***30 | Bolt | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Muffler (With Safety Cover)(#81734-)
| 01***12 | Bolt - Front Cover Mounting | 15 |
| 01***40 | Bolt (Op) | 4 |
| 01***25 | Bolt,Joint | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Muffler(#81734-)
| 01***40 | Bolt (Op) | 4 |
| 01***25 | Bolt,Joint | 4 |
| 01***30 | Bolt | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution (English)(#62922-81314)
| 09***61 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
| 61***20 | Plate? Name,Engine (Limited Supply) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution (English)(#77894-81314)
| 04***50 | Screw | 4 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
| 61***10 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution (French)(#62922-81314)
| 09***61 | Plate? Instruction,Air Cleaner (French) | 1 |
| 61***20 | Plate? Name,Engine (Limited Supply) | 1 |
| 61***20 | Plate? Name,(French) (Limited Supply) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution (French)(#77894-81314)
| 04***50 | Screw | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
| 61***10 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution (German)(#62922-81314)
| 09***61 | Plate? Instruction,(German-English) (Not Shown) | 1 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
| 61***20 | Plate? Name,Engine (Limited Supply) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution (German)(#77894-81314)
| 04***50 | Screw | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
| 61***10 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution (Spanish)(#62922-81314)
| 09***61 | Plate? Instruction,(Spanish-English) (Not Shown) | 1 |
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
| 61***20 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution (Spanish)(#77894-81314)
| 04***50 | Screw | 4 |
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
| 61***10 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution Plate (For Regulation Of Epa)(#60863-66443)
| 04***50 | Screw | 4 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Air Cleaner Caution Plate (For Regulation Of Epa)(#66444-81314)
| 04***50 | Screw | 4 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Caution Plate (For Eu Exhaust Gas Regulation)(#81315-)
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Caution Plate(#81315-)
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Name Plate And Caution(#81315-)
| 60***40 | Plate? Name,Engine (Limited Supply) | 1 |
| 61***20 | Plate? Name,Engine (Limited Supply) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Nozzle Holder (Inner Parts)(#64065-81733)
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
| 61***10 | Holder Ass'Y | 1 |
| ND***90 | Connector,Inlet | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Nozzle Holder (Inner Parts)(#81734-)
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
| 61***10 | Holder Ass'Y | 1 |
| ND***90 | Connector,Inlet | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Adapter(#64065-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Cooler Mounting Parts(#76796-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 13 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***80 | Bolt,(With Corrosion Resistor) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Cooler(#61779-76795)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 13 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***80 | Bolt,(With Corrosion Resistor) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Cooler(#76796-)
| 01***25 | Bolt - Relay Mounting | 2 |
| 07***42 | O-Ring,(See Fig.A3310) | 1 |
| 61***11 | Element | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Filter(#64065-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Level Gauge (With Heater)(#64065-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Level Gauge(#64065-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Pan And Suction Tube (With Heater)(#64065-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 32 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Pan And Suction Tube(#64065-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 29 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 7 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Oil Pump(#61779-)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Piston(#61779-)
| 02***13 | Pin, Dowel | 2 |
| 04***18 | Ring, Snap | 12 |
| 61***10 | Pin,Piston | 6 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Rocker Arm(#61582-75757)
| 01***75 | Screw | 40 |
| 01***08 | Nut,R.H. Thread | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 40 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Rocker Arm(#75758-)
| 01***75 | Screw | 40 |
| 01***08 | Nut,R.H. Thread | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 40 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Safety Guard (For Fuel Injection Pump Drive)(#61589-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 61***50 | Cover, Safety | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Spare Parts (For 35a Alternetor)(#64065-80914) : Unit_01_of_02
| 04***68 | V-Belt Set,(Tropical Sandy? Dusty Spec.) | 1 |
| 07***34 | O-Ring,Transmission And Steering Case | 1 |
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Spare Parts (For 35a Alternetor)(#64065-80914) : Unit_02_of_02
| 04***67 | V-Belt Set,(Tropical Sandy? Dusty Spec.) | 1 |
| 07***34 | O-Ring,Transmission And Steering Case | 1 |
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Spare Parts (For 35a Alternetor)(#80915-) : Unit_02_of_02
| 04***67 | V-Belt Set,(Tropical Sandy? Dusty Spec.) | 1 |
| 07***34 | O-Ring,Transmission And Steering Case | 1 |
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Spare Parts (For 35a Alternetor)(#80915-) : Unit_01_of_02
| 04***68 | V-Belt Set,(Tropical Sandy? Dusty Spec.) | 1 |
| 07***34 | O-Ring,Transmission And Steering Case | 1 |
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Spare Parts (Noise Suppression Spec.)(#64065-80914)
| 04***69 | V-Belt Set,Fan | 1 |
| 07***34 | O-Ring,Transmission And Steering Case | 1 |
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Spare Parts (Noise Suppression Spec.)(#80915-)
| 04***69 | V-Belt Set,Fan | 1 |
| 07***34 | O-Ring,Transmission And Steering Case | 1 |
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Starting Motor (11kw) (Inner Parts)(#61582-85685)
| 60***10 | Starting Motor Ass'Y,(11kw) | 1 |
| SD***X0 | Bearing,Ball | 1 |
| SD***X0 | Brush Holder Ass'Y | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Starting Motor (11kw) (Inner Parts)(#85686-)
| 60***11 | Starting Motor Ass'Y,(11kw) | 1 |
| KD***40 | Spring,Spring | 4 |
| KD***57 | Bearing, Ball, Front | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Starting Motor (7.5kw) (Inner Parts)(#61659-)
| 60***11 | Starting Motor Ass'Y,(7.5kw) | 1 |
| KD***60 | Shift Lever Assembly | 1 |
| KD***40 | Spring,Spring | 4 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Starting Motor Mounting (11kw)(#61582-85685)
| 01***40 | Bolt (Kit) | 3 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
| 08***10 | Connector, Clip | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Starting Motor Mounting (11kw)(#85686-)
| 01***40 | Bolt (Kit) | 3 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
| 08***10 | Connector, Clip | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Starting Motor Mounting (7.5kw)(#61659-)
| 01***40 | Bolt (Kit) | 3 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
| 08***10 | Connector, Clip | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Tamper Proof Kit (For Regulation Of Epa)(#64065-)
| 61***10 | Tamper Proof Kit | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Thermostat Housing(#61582-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***65 | Screw | 4 |
| 02***04 | Plug,(For Shipping) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Turbocharger (High Altitude Spec.) (Inner Parts)(#64065-)
| 61***00 | Turbocharger Ass'Y,(Tv7705) | 1 |
| GA***85 | V-Band Ass'Y | 1 |
| GA***07 | Rotor Ass'Y | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Turbocharger Oil Piping (High Altitude Spec.)(#64065-)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***40 | Bolt (Op) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Water Drain Valve(#60863-)
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Water Pump Gasket Kit(#64065-)
| 02***37 | O-Ring,(For Pc750?1800) (A5010) | 1 |
| 07***15 | O-Ring,Scavenge Pump | 1 |
| 07***15 | O-Ring,(F4320-57a0 -11 ) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Water Pump(#64065-75182)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Water Pump(#75183-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : 6d125e-2g-5 S/N 60721-Up : Water Separator(#64065-)
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Washer,(For 35a Alternator) | 2 |
Accessory
Komatsu : D58e-1(S/N 80888-Up) : Accessory : Body Sheet
Komatsu : D58e-1(S/N 80888-Up) : Accessory : Cap And Overall
| 09***50 | Overall,(Special Order) | 1 |
| 09***50 | Cap And Overall Kit,(Except Japan) | 1 |
| 09***50 | Cap And Overall Kit | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Accessory : Spare Parts
| 07***75 | O-Ring,Steering Oil Filter | 1 |
| 07***80 | O-Ring,Hydraulic Oil Filter | 1 |
| 07***32 | O-Ring,Drain Plug? Main Clutch | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Accessory : Tool
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***45 | Nozzle, Grease Pump (Non-Flexible Type) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Accessory : Tool (For Reversible Fan)
Cooling System
Komatsu : D58e-1(S/N 80888-Up) : Cooling System : Core Grid (For Sandy Dusty Terrain Spec.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Cooling System : Radiator And Piping
| 01***20 | Bolt,(For Mono Lever Steering) | 60 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Cooling System : Radiator Cover
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 21 |
| 01***05 | Capscrew | 6 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 6 |
Electrical System
Komatsu : D58e-1(S/N 80888-Up) : Electrical System : Back-Up Ararm(#80888-82119)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***20 | Screw | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Electrical System : Back-Up Ararm(#82120-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***65 | Capscrew - M16 X 2.00 X 90 | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Electrical System : Battery
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Electrical System : Battery (Large Capacity)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Electrical System : Electrical System
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Engine Related Parts
Komatsu : D58e-1(S/N 80888-Up) : Engine Related Parts : Damper
Komatsu : D58e-1(S/N 80888-Up) : Engine Related Parts : Engine Mounting Parts
| 01***20 | Bolt | 1 |
| 01***50 | Bolt | 3 |
| 01***05 | Bolt | 2 |
Fuel Tank And Related Parts
Komatsu : D58e-1(S/N 80888-Up) : Fuel Tank And Related Parts : Fuel Tank And Piping(#80888-82457)
| 01***12 | Bolt - M8 - 1.25 X 12 | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
Komatsu : D58e-1(S/N 80888-Up) : Fuel Tank And Related Parts : Fuel Tank And Piping(#82458-)
| 01***12 | Bolt - M8 - 1.25 X 12 | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
Guard
Komatsu : D58e-1(S/N 80888-Up) : Guard : Engine Hood And Side Cover
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
Komatsu : D58e-1(S/N 80888-Up) : Guard : Engine Hood And Side Cover (For Mechanical Angle Power Tilt Dozer)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
Komatsu : D58e-1(S/N 80888-Up) : Guard : Fender And Rear Cover
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 27 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Guard : Fender And Rear Cover (For Mechanical Angle Power Tilt Dozer)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 27 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Guard : Radiator Guard And Cylinder Support
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
| 01***60 | Bolt,(Shim Thickness?More Than 8mm) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Guard : Radiator Guard And Cylinder Support (For Mechanical Angle Power Tilt Dozer)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***60 | Bolt,(Shim Thickness?More Than 8mm) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Guard : Reinforced Under Guard
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***40 | Bolt,(With Center Guard) | 2 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 12 |
Komatsu : D58e-1(S/N 80888-Up) : Guard : Rops Mount
| 01***30 | Bolt,(Not Used With Emergency Str.) | 16 |
| 01***40 | Bolt,(With Center Guard) | 12 |
| 01***60 | Bolt, Mount Pole | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Guard : Under Guard
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***40 | Bolt,(With Center Guard) | 8 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Guard : Under Guard (With Hook)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 6 |
| 01***40 | Bolt,(With Center Guard) | 8 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 6 |
Hydraulic System
Komatsu : D58e-1(S/N 80888-Up) : Hydraulic System : Hydraulic Piping (Pump To Tank)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 4 |
| 01***80 | Bolt,(Not Shown) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Hydraulic System : Hydraulic Piping (Tank To Lift Cylinder)(#80888-81981)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Hydraulic System : Hydraulic Piping (Tank To Lift Cylinder)(#81982-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Hydraulic System : Hydraulic Piping (Tank To Ripper Cylinder)
| 01***30 | Bolt - M8 X 30lg | 24 |
| 01***45 | Bolt,(With Water Separator Type) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Hydraulic System : Hydraulic Piping (Tank To Tilt Cylinder) (1/2)
| 01***35 | Bolt,(For Fix Position) | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Hydraulic System : Hydraulic Piping (Tank To Tilt Cylinder) (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 13 |
Komatsu : D58e-1(S/N 80888-Up) : Hydraulic System : Hydraulic Piping (Tank To Tilt Cylinder) (For Mechanical Angle Power Tilt Dozer)
| 01***35 | Bolt,(For Position Fixing) | 8 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 4 |
Main Frame And Related Parts
Komatsu : D58e-1(S/N 80888-Up) : Main Frame And Related Parts : Equalizer Bar
| 01***35 | Bolt | 2 |
| 01***55 | Bolt, Fuel Tank Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Main Frame And Related Parts : Final Drive Case Wear Guard
| 01***75 | Bolt - Mount 1st Clutch Housing | 8 |
| 13***12 | Guard,R.H. (With Wear Guard) | 1 |
| 13***22 | Guard,L.H. (With Wear Guard) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Main Frame And Related Parts : Steering Case And Main Frame
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(For Slag Handling) | 4 |
Marks And Plates
Komatsu : D58e-1(S/N 80888-Up) : Marks And Plates : Marks And Plates (English)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 10 |
| 08***01 | Indicator,Dust Indicator | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Marks And Plates : Marks And Plates (French) (Except France)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 10 |
| 08***01 | Indicator,Dust Indicator | 1 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Miscellaneous
Komatsu : D58e-1(S/N 80888-Up) : Miscellaneous : Vandalism Protection
| 07***00 | Cap,(For Vandalism Protection) | 1 |
| 07***00 | Cap, Locking - Hydraulic Tank Oil Filler Cap | 1 |
| 07***00 | Cap,(For Vandalism Protection) | 1 |
Operator'S Compartment And Control System
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Compressor And Related Parts (For Air Conditioner)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt, Mount Filter To Bracket | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Conditioner (For Rops Cab) (1/2)
| 01***10 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 8 |
| 01***30 | Bolt,(For Mechanical Governor) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Conditioner (For Rops Cab) (2/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 18 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Conditioner Compressor
| 04***20 | Ring, Snap | 1 |
| 14***00 | Compressor Ass'Y | 1 |
| 14***10 | Compressor Ass'Y | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Conditioner Condenser
| 01***65 | Bolt,R.H | 4 |
| 01***04 | Nut,(For Air Conditioner Less) | 3 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Conditioner Grille
| 14***60 | Bushing | 3 |
| 14***60 | Wire | 1 |
| 14***50 | Cable | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Conditioner Piping (1/2)
| 01***25 | Bolt,Without Revolution Sensor | 4 |
| 01***40 | Bolt,(With Air Conditioner) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Conditioner Piping (2/2)
| 01***25 | Bolt,Without Revolution Sensor | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Conditioner Unit
| 14***40 | Grommet | 2 |
| 14***01 | Unit Ass'Y | 1 |
| 14***02 | Unit Ass'Y | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Air Duct (For Rops Cab)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 11 |
| 01***12 | Screw,R.H | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Blade Control Lever
| 01***55 | Bolt | 1 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Blade Control Lever(#81285-)
| 01***55 | Bolt | 1 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Box And Floor
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Brake Lock Lever
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 9 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
| 01***16 | Screw | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Brake Pedal And Linkage
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Bolt,(For Strengthened Cover) | 4 |
| 01***08 | Nut,L.H. Thread | 3 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Canopy
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 8 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 8 |
| 01***50 | Bolt,(Shim Thickness?Less Than 8mm) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Control Box (For Rops Cab)
| 01***10 | Screw,(For Lighter) | 4 |
| 01***12 | Screw,(For Side Lamp) (Not Shown) | 2 |
| 01***20 | Screw - Turn Signal And Parkinglight Mounting | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Dashboard And Steering Lever
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 13 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 10 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Decelerator Pedal
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***35 | Bolt,(For Position Fixing) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Electrical System (For Rops Cab)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 9 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 12 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Fuel Control Lever
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Hot Water Car Heater (Electrical)(#82269-)
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Hot Water Car Heater (Heater And Air Duct)(#82269-)
| 01***25 | Bolt,Without Revolution Sensor | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Hot Water Car Heater (Inner Parts)(#82269-)
| 20***30 | Heater Ass'Y,(See Fig.Y1977-01a1) | 1 |
| ND***40 | Motor Ass'Y | 1 |
| ND***70 | Case,Upper | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Hot Water Car Heater (Piping)(#82269-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
| 01***25 | Screw | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Hot Water Car Heater(#80888-82268)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***40 | Bolt,(With Service Valve R.H.) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Instrument Panel
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Operator'S Seat(#80888-82152)
| 01***16 | Bolt,(For Slag Handling) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 9 |
| 01***20 | Bolt,(Used When Towing Winch) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Operator'S Seat(#82153-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 9 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Operator'S Seat? Fixed Type
| 01***16 | Bolt,(For Slag Handling) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 8 |
| 01***20 | Bolt,(Used When Towing Winch) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Ripper Control Lever
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***06 | Nut,L.H. Thread | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Roof Lining (For Rops Cab)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 14 |
| 01***10 | Screw,(With Air Conditioner) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Rops Cab (1/3)
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Rops Cab (2/3)
| 01***20 | Bolt,(Without Maintenance Monitor) | 4 |
| 01***40 | Bolt | 4 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Rops Cab (3/3)
| 01***12 | Screw,(With Articulate Indicator) | 4 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 23 |
| 01***16 | Screw,(With Ashtray) | 28 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Rops Canopy
| 01***30 | Bolt,(Not Used With Emergency Str.) | 14 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 14 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Safety Lock Lever And Cover
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Steering Lever Linkage
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Transmission Control Lever
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***06 | Nut,L.H. Thread (For Russian) | 2 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 3 |
Komatsu : D58e-1(S/N 80888-Up) : Operator'S Compartment And Control System : Window Washer (For Rops Cab)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 6 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 6 |
Power Train And Final Drive
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Bevel Gear Shaft
| 01***10 | Bolt, Mount Flasher | 4 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 6 |
| 01***20 | Bolt | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Control And Relief Valve Piping
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 3 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Final Drive Case And Sprocket
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 16 |
| 01***40 | Capscrew | 50 |
| 01***45 | Bolt, M14x2.0x45 | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Final Drive Gear
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***30 | Bolt - M14 X 30lg | 16 |
| 01***13 | Nut | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Final Drive Shaft
| 01***40 | Capscrew | 12 |
| 01***70 | Bolt,(With Wear Guard) | 24 |
| 01***55 | Bolt,(Without Rops) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Relief Valve
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Steering Booster
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***60 | Bolt, Tube To Oil Cooler | 4 |
| 01***65 | Bolt, Mount Radiator To Frame (Bottom) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Steering Brake (1/2)
| 01***45 | Bolt,(For Slag Handling) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Steering Brake (2/2)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt | 2 |
| 01***12 | Nut | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Steering Clutch
| 01***12 | Screw | 2 |
| 01***10 | Nut (K10) | 2 |
| 06***17 | Bearing | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Steering Filter
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 4 |
| 07***10 | O-Ring,(F4350-62a0 -5 ), O-Ring; Komatsu S/N 22***01 & Abv - Was 07000-02010, O-Ring; Was 07000-02010 | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Steering Piping
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***30 | Bolt,(For France Noise Suppression) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Steering Valve
| 01***16 | Bolt,(For Slag Handling) | 1 |
| 01***60 | Bolt,(Without Alternator Bracket) | 2 |
| 01***50 | Bolt | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Torque Converter Case(#80888-81637)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Torque Converter Case(#81638-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 14 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission (1st Clutch And Output Shaft)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 10 |
| 01***80 | Bolt, Mount Tubes To Switch And Work Pumps | 3 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission (Forward Clutch And Shaft)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 3 |
| 04***14 | Pin, Dowel | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission (Mounting And Filler)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 4 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission (Reverse? 2nd And 3rd Clutch)
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 4 |
| 04***10 | Ring, Snap | 1 |
| 04***70 | Ring, Snap | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Case
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 11 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 3 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Case Cover And Lever
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Control Valve (1/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Control Valve (2/2)(#80888-81637)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***10 | Bolt,(With Joy Stick Steering) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Control Valve (2/2)(#81638-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***10 | Bolt,(With Joy Stick Steering) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Filter
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
| 01***36 | Washer,Radio Controlled Slag Handling | 4 |
| 04***12 | Ring, Snap | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Lubrication Valve
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Piping (1/2)(#80888-82280)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Piping (1/2)(#82281-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 7 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Piping (2/2)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***55 | Bolt, Mount Tube To Switch Pump | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Transmission Rear Cover
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 6 |
| 01***65 | Capscrew | 9 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Turbine Stator And Valve(#80888-81637)
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Turbine Stator And Valve(#81638-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 32 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Power Train And Final Drive : Universal Joint
| 01***29 | Washer,Spring (Cold Weather Spec.) | 4 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 8 |
| 02***95 | Bolt | 4 |
Service Kit And Component Parts
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Blade Lift Cylinder(#80888-81729)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***35 | Bolt,(Without Auto Priming System) | 4 |
| 01***50 | Bolt,(For Trimming Dozer) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Blade Lift Cylinder(#81730-)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***35 | Bolt,(Without Auto Priming System) | 4 |
| 01***50 | Bolt,(For Trimming Dozer) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Blade Tilt Cylinder
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 2 |
| 01***75 | Bolt | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Blade Tilt Cylinder (For Mechanical Angle Power Tilt Dozer)
| 01***55 | Bolt,(For Reinforced Type) | 2 |
| 01***75 | Bolt | 4 |
| 01***48 | Washer,Spring (For Slag Handling), Washer-Spring | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Pump
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 16 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 04***24 | Pin,Dowel (For No.3 Housing) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (1/4) (For Angle Dozer)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 5 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (1/4) (For Straight Tilt Dozer) (For Mechanical Angle Power Tilt Dozer)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (1/5) (For Angle Dozer And Ripper)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 53 |
| 01***11 | Nut, Nylon Lock | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (1/5) (For Straight Tilt Dozer And Ripper)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 53 |
| 01***11 | Nut, Nylon Lock | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (2/4) (For Angle Dozer)
| 01***70 | Bolt, Spacer | 1 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (2/4) (For Straight Tilt Dozer) (For Mechanical Angle Power Tilt Dozer)
| 01***70 | Bolt, Spacer | 1 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (2/5) (For Angle Dozer And Ripper)
| 01***30 | Bolt,(For France Noise Suppression) | 5 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 4 |
| 01***30 | Bolt,(For Mechanical Governor) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (2/5) (For Straight Tilt Dozer And Ripper)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 4 |
| 01***65 | Bolt (M12-1.75x65) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (3/4) (For Angle Dozer)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
| 01***40 | Bolt,(Dust And Dirt Protection) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (3/4) (For Straight Tilt Dozer) (For Mechanical Angle Power Tilt Dozer)
| 01***30 | Bolt,(Cold Terrain Spec.) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (3/5) (For Angle Dozer And Ripper)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
| 01***40 | Bolt,(Dust And Dirt Protection) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (3/5) (For Straight Tilt Dozer And Ripper)
| 01***30 | Bolt,(Cold Terrain Spec.) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (4/4) (For Angle Dozer)
| 01***35 | Bolt, Mounting - Flywheel Housing End | 3 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 3 |
| 01***70 | Bolt, Spacer | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (4/4) (For Straight Tilt Dozer) (For Mechanical Angle Power Tilt Dozer)
| 01***35 | Bolt, Mounting - Flywheel Housing End | 5 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 3 |
| 01***85 | Bolt, Mount Solenoid Valve Body | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (4/5) (For Angle Dozer And Ripper)
| 01***35 | Bolt, Mounting - Flywheel Housing End | 3 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 3 |
| 01***70 | Bolt, Spacer | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (4/5) (For Straight Tilt Dozer And Ripper)
| 01***35 | Bolt, Mounting - Flywheel Housing End | 5 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 3 |
| 01***85 | Bolt, Mount Solenoid Valve Body | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (5/5) (For Angle Dozer And Ripper)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 1 |
| 01***80 | Bolt, Mount Strainer Flange | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Hydraulic Tank And Valve (5/5) (For Straight Tilt Dozer And Ripper)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***55 | Bolt,(For Suction? Reversible Fan) | 1 |
| 01***80 | Bolt, Mount Strainer Flange | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Ripper Cylinder
| 01***35 | Bolt,(For Fix Position) | 2 |
| 01***50 | Capscrew | 2 |
| 01***45 | Bolt, M14x2.0x45 | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Steering Pump
| 01***08 | Nut,R.H. Thread | 8 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 8 |
| 04***20 | Pin,Dowel (Welded) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Service Kit And Component Parts : Transmission Pump
| 01***90 | Bolt | 6 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 8 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 8 |
Under Carriage
Komatsu : D58e-1(S/N 80888-Up) : Under Carriage : Carrier Roller
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***45 | Bolt,(For 60ton Dump Body) | 16 |
Komatsu : D58e-1(S/N 80888-Up) : Under Carriage : Front Idler
Komatsu : D58e-1(S/N 80888-Up) : Under Carriage : Recoil Spring
| 01***45 | Bolt,(For Slag Handling) | 12 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Under Carriage : Track Frame
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 36 |
| 01***50 | Bolt,(Shim Thickness?Less Than 8mm) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Under Carriage : Track Roller(#80888-82492)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 12 |
| 01***65 | Bolt,(With Canvas Or Rops Canopy) | 48 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 12 |
Komatsu : D58e-1(S/N 80888-Up) : Under Carriage : Track Roller(#82493-)
| 01***65 | Capscrew - M16 X 2.00 X 90 | 48 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 48 |
| 07***55 | O-Ring,Front Accessory Drive | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Under Carriage : Track Shoe (Lubricate Type) (Single Grouser)
| 01***22 | Nut? Shoe (Kit) | 312 |
| 07***30 | Plug,(Large) | 82 |
| 07***21 | Plug,(Small) | 82 |
Komatsu : D58e-1(S/N 80888-Up) : Under Carriage : Track Shoe (Master Pin Type) (Single Grouser)
| 13***13 | Track Shoe Ass'Y | 1 |
| 13***26 | Link,Track? L.H | 82 |
| 13***36 | Link,Track? R.H | 82 |
Work Equipment
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Angle Blade
| 01***55 | Bolt - Mount Cage To Transmission Case | 4 |
| 01***14 | Nut | 4 |
| 02***70 | Bolt, Plow | 26 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Blade (For Mechanical Angle Power Tilt Dozer)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 4 |
| 01***14 | Nut | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : C-Frame (For Mechanical Angle Power Tilt Dozer)
| 01***45 | Bolt, Fuel Tank Mounting - Front Right | 16 |
| 01***80 | Bolt,(Not Shown) | 2 |
| 01***40 | Bolt,L.H | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Drawbar (Lock Type)
| 01***80 | Bolt | 6 |
| 01***60 | Bolt (Itl) | 1 |
| 01***19 | Nut - M24 | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Fair Lead (For Towing Winch)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***45 | Bolt,L.H | 8 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Hitch
| 01***90 | Bolt (Kit) | 4 |
| 01***60 | Bolt (Itl) | 1 |
| 01***15 | Nut,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Hydraulic Piping (Tilt Cylinder Line) (For Mechanical Angle Power Tilt Dozer)(#80888-81232)
| 01***35 | Bolt,(For Position Fixing) | 4 |
| 01***45 | Screw | 4 |
| 01***40 | Bolt,R.H. Outside And L.H. Inside, Bolt | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Hydraulic Piping (Tilt Cylinder Line) (For Mechanical Angle Power Tilt Dozer)(#81233-)
| 01***30 | Bolt - M8 X 30lg | 48 |
| 01***35 | Bolt,(For Fix Position) | 4 |
| 01***45 | Screw | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Logging Arm(For Towing Winch)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***45 | Bolt,L.H | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Ripper Frame
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Straight Tilt Blade
| 01***65 | Bolt,(Used With Pin Puller) | 4 |
| 01***60 | Bolt,Rear | 16 |
| 01***15 | Bolt (Kit) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Straight Tilt Frame
| 01***80 | Bolt,(Not Shown) | 2 |
| 01***35 | Bolt,R.H. Outside And L.H. Inside | 4 |
| 01***45 | Bolt | 16 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Swing Drawbar
| 01***50 | Bolt,(For Large Size Tire) | 4 |
| 01***65 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Capscrew | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Brake
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***45 | Bolt | 4 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Case Cover And Hitch
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 15 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 22 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Clutch And Brake Drum
| 01***35 | Bolt,(For Fix Position) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 12 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Control Lever
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Control Linkage
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Control Valve
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***40 | Screw, Hex Socket | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Gear And Drum
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Gear Case
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch P.T.O. Shaft
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(With Body Positioner) | 3 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 4 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Piping
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***40 | Bolt (Op) | 3 |
| 01***45 | Bolt,(With Water Separator Type) | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Shift Fork
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 1 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 2 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Transfer Case
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Rear Attachment Less) | 11 |
| 01***30 | Bolt - M8 X 30lg | 6 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Transfer Gear
| 01***18 | Bolt | 2 |
| 01***22 | Capscrew | 4 |
| 04***30 | Ring, Retaining | 1 |
Komatsu : D58e-1(S/N 80888-Up) : Work Equipment : Winch Valve Control Linkage
| 01***30 | Bolt - M8 X 30lg | 3 |
| 01***40 | Screw, Hex Socket | 2 |
| 01***75 | Bolt | 1 |
D58E-1(S/N 80888-UP) serial number reference
The machine PIN/serial plate on this generation of Komatsu dozer is a riveted data plate, typically on the frame near the operator's seat area rather than stamped into the frame itself; check behind or beside the operator's seat first. There is no 3-letter alpha prefix to decode on this model - read the full serial number as a plain digit string and compare it directly against the S/N break point in the parts or shop manual (80888-UP) to confirm which model/configuration (D58E-1, D58E-1A Straight Tilt, or D58E-1B Power Angle Tilt) the unit falls in. Since two engine families were fitted across this chassis range, confirm the exact engine model and its own effectivity break with your dealer using the engine data plate rather than the chassis serial alone.
| Prefix | Identifies | Notes |
|---|---|---|
| 80888 | D58E-1 base family, S/N 80888-UP (no alpha PIN prefix on this generation) | This generation of Komatsu crawler dozer does not use a 3-character alpha PIN prefix. The factory shop manual groups D58E-1, D58E-1A (Straight Tilt Dozer), and D58E-1B (Power Angle Tilt Dozer) together, all effective from S/N 80888-UP, alongside the separate D58P-1 family which starts at a different numeric break (80588-UP). Configuration (straight tilt vs power angle tilt) is carried in the model suffix, not in a separate serial prefix. Std/XL/LGP undercarriage width variants are not documented as separate serial breaks for this range; confirm with dealer if a specific undercarriage width needs to be pinned down. Two engine families are documented for this chassis range (6D125-1 series and 6D125-2 series); confirm with dealer which engine option applies to a specific unit. |
Frequently asked questions
What engine does the Komatsu D58E-1 (S/N 80888-UP) use?
It is powered by the Komatsu 6D125E inline six-cylinder diesel, displacing about 11 liters, paired with a 3-speed powershift transmission and torque converter. Exact net horsepower for this specific serial range is not consistently published across spec sources — confirm the rating plate on your unit or check with your Komatsu dealer.
What is the operating weight of the Komatsu D58E-1 (S/N 80888-UP)?
Operating weight runs roughly 10.9 to 11.8 metric tons (about 24,000 to 26,000 lb), varying by configuration. Tilt-dozer and power angle-tilt-dozer blade setups add weight over the base straight-dozer configuration.
What replaced the Komatsu D58E-1?
Komatsu did not carry the D58E-1 name into later generations. In today's lineup, the D61 series occupies the equivalent mid-size dozer class, though no single factory succession document ties this exact serial range to a specific follow-on model — treat it as a class comparison rather than a confirmed direct replacement.
What D58E-1(S/N 80888-UP) owners discuss
What engine quirks show up on the D58E-1's 6D125-series engine?
This dash range runs the mechanical, naturally aspirated 6D125-1 inline-six (exact suffix and rating can vary by build within the 80888-up range, so confirm against the plate). It's a simple, pre-electronic diesel with no ECM codes to lean on. The recurring complaint across this engine family is dust ingestion: a clogged or torn air filter lets abrasive dust past the turbo/intake and accelerates ring and liner wear, sometimes showing up as glazed or sandblasted compressor wheels on turbocharged siblings. A diesel smell in the crankcase oil usually points to a washed-down cylinder from a leaking or misadjusted injector, not a ring problem. Keep the air intake system sealed and change filters on schedule, and pull an oil sample at every service to catch fuel dilution early.
How does the torque converter and power-shift transmission behave, and what goes wrong with it?
The D58E-1 uses a torque-converter-and-power-shift driveline, not a hydrostatic drive. Owners generally rate the transmission as durable, but converter slip is the main failure mode reported: delayed response when shifting direction, higher-than-normal stall speed, and rising transmission oil temperature under load. Internal damage is usually traced to debris that got into the converter or a bearing/thrust-washer problem upstream. Check converter-out oil temp and pressure against the monitor gauge during a test drive, and pull a transmission oil sample rather than judging by feel alone.
What's the most commonly reported steering problem on this machine, and how is it fixed?
The recurring complaint is needing excessive lever force to get a track to stop turning, traced to worn multiple-disc steering clutches and brake bands. In worn-out cases the band linings were found worn down to the rivets. The catch is accessibility: fixing it means pulling the rear center axle assembly, including the ring gear and both steering clutch packs, just to get at the brake bands. Budget for that labor, not just parts, if a steering complaint is reported. Because this is a braking system, have your dealer verify clutch and band condition and confirm proper adjustment before returning the machine to work.
Are there any hydraulic quirks specific to the PAT (power angle tilt) blade circuit?
Yes. Bleeding the tilt cylinders on the PAT blade circuit is order-sensitive. Owners report that if the bleed sequence in the operation and maintenance manual isn't followed exactly, the blade won't tilt correctly afterward even though the circuit holds pressure fine. If a blade tilts unevenly or lags on one side after cylinder or hose work, re-bleed following the manual's sequence before chasing a valve or cylinder fault.
What undercarriage wear pattern should owners expect on a machine this size?
Nothing unusual for a small-to-mid dozer class (roughly comparable in size to a Cat D5-D6): the undercarriage is the single biggest lifetime maintenance cost item on any dozer, commonly cited at around half of total upkeep spend over the machine's life. On this family, the two failure points to watch are the final drive floating (duo-cone) seal at the sprocket, which leaks oil onto the track when it fails, and the track adjuster/recoil cylinder, which can weep grease from the front seal even after a reseal. Sprockets wear alongside the chain, so if the track chain and bushings get rebuilt or turned, plan on replacing the sprockets in the same job or the new chain will wear prematurely against the old teeth.
What electrical or sensor issues come up on a machine of this vintage?
This generation predates electronic engine and transmission controls, so there's no fault-code diagnostics to rely on. Reported electrical complaints are the basic kind: corroded or loose harness connectors, failed temperature or pressure sending units that trigger a false warning light on the monitor panel, and normal charging-system or starter wear. Before condemning a sensor or gauge, cross-check the monitor panel reading against a mechanical gauge or direct measurement, and inspect connectors and grounds for corrosion first.
What should a buyer check before purchasing a used D58E-1 in this serial range?
Confirm the serial number falls in the 80888-up range stamped on the machine matches what's being sold, and get full service and hour history if available. Walk the machine for abuse signs: punctures, rips, or dents in the blade skin (a sign it's been used to push other equipment or worked in heavy rock), missing grab handles or guarding, and damaged hood panels. Check for leaks at the cylinders, final drives, and under the engine and transmission before starting it, and pull oil samples from engine, transmission, and hydraulic systems rather than trusting appearance alone. Start the engine cold and listen for hard starting or excess smoke. Test steering response on both sides for the excessive-lever-force symptom described above, and cycle the blade tilt to confirm it responds evenly. Measure undercarriage wear (link, bushing, sprocket) rather than eyeballing it, since it drives resale value more than any other single item. Because steering brakes are a safety system, have your dealer verify clutch and brake band condition on any machine you're seriously considering before you buy.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific D58E-1(S/N 80888-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.