Komatsubulldozermedium (d40 - d75)
Komatsu D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer))
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu D41P-3 (S/N 6001-UP) is a compact crawler dozer designed for utility and light earthmoving applications. This specific EU configuration features a straight tilt blade setup. The machine is powered by the Komatsu 6D105-1, 6-cylinder engine, delivering approximately 93 hp (69.4 kW). Operating within the mid-size crawler tractor class, it maintains an operating weight of roughly 10,620 kg (23,413 lb). The series was produced between 198SB and 1995.
Across its production life, the D41P-3 transitioned through various regional configurations, including specific builds for the EU market. It remains a significant machine in the used parts and machinery market due to the durability of its Hydroshift transmission and the widespread availability of 6D105 engine components. Maintenance of the undercarriage and hydraulic systems is critical for preserving the resale value and operational uptime of this series.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) specifications
Engine
| Engine Model | Komatsu 6D105-1 |
| Number of Cylinders | 6 |
| Gross Power | 93 hp (69.4 kW) |
| Power Measured @ RPM | 2350 rpm |
| Displacement | 396.1 cu in (6.5 L) |
| Aspiration | N.A. |
Weights
| Operating Weight (Tractor) | 9090 kg (20040 lb) |
| Operating Weight (Straight-Tilt Dozer) | 10500 kg (23148.5 lb) |
| Operating Weight (Other configurations) | 10620 kg (23413.1 lb) |
Dimensions
| Length w/ Blade | 4595 mm (15.08 ft) |
| Length w/o Blade | 3590 mm (11.78 ft) |
| Width Over Tracks | 2480 mm (8.14 ft) |
| Height To Top of Cab | 2815 mm (9.24 ft) |
| Ground Clearance | 430 mm (1.42 ft) |
| Length of Track on Ground | 2590 mm (8.5 ft) |
| Track Gauge | 1760 mm (5.78 ft) |
| Standard Shoe Size | 720 mm (28.35 in) |
Undercarriage
| Ground Pressure | 23.52 kPa (3.41 psi) to 0.2 bar (3.5 psi) |
| Number of Shoes Per Side | 43 |
| Number of Track Rollers Per Side | 6 |
| Number of Carrier Rollers Per Side | 1 |
| Track Pitch | 175 mm (6.89 in) |
Performance
| Transmission Type | Hydroshift (HS) planetary-gear type, hydraulically-actuated |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Hydraulic Pump Capacity (Discharge Flow) | 86 L/min |
| Hydraulic Relief Valve Setting | 20.6 MPa (210 kg/cm²) |
Blades
| Standard Blade Width | 3025 mm (10 ft) |
| Standard Blade Height | 890 mm (35.1 in) |
| Blade Capacity | 2.4 m³ (3.2 yd³) |
| Cutting Depth | 340 mm (13.4 in) |
Service Capacities
| Engine Oil/Coolant/Hydraulic Check Requirement | Check levels before starting per maintenance standard |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (w/ filter) | 10W/30 or 15W/4/0 Engine Oil; 10W/30 Low Saps available for specific requirements | |
| Cooling System | Antifreeze Blue Concentrate or Red OAT 5 Year Antifreeze Coolant | |
| Fuel Tank | ||
| Transmission/Powertrain (Hydroshift) | 23.09 L (6.0 gal) | CAT 10W or CAT 30W Transmission Fluid; TO10-Powertrain Oil |
| Bevel Gear/Steering Compartments | 80W/90 GL4 or GL5 Gear Oils; Dexron II or Dexron III for Automatic Transmission and Steering Fluid | |
| Final Drives (each) | 80W/90 EP GL5 Gear Oil | |
| Hydraulic System/Tank | 10W Hydraulic Oil; HVI 32, HVI 46, or ISO HLP 68 | |
| Grease |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) beyond the schedule
Predictive Maintenance & Fluid Analysis
Monitor the 6D105-1 engine oil and hydraulic fluids regularly. Use fluid analysis to detect early signs of metal wear or coolant contamination. Check the dust indicator frequently; a red piston indicates the air cleaner element requires cleaning or replacement to prevent engine power loss. Ensure all lubricants, including transmission and final drive oils, meet Komatsu specifications for your specific operating climate.
Corrective & Common Repairs
Address hydraulic cylinder leaks at the blade lift or tilt rams immediately to prevent pressure loss. If the Hydroshift transmission fails to engage forward, inspect the hydraulically-actuated planetary gear system and dampers for mechanical faults. Monitor the air cleaner element; if exhaust gas turns black, clean or replace the outer element to avoid intake restrictions and engine overheating.
Overhaul & Rebuild Points
Plan major overhauls around the 2000-hour mark, focusing on the powertrain and hydraulic pump. Inspect the gear-type hydraulic pump for discharge flow efficiency. During engine rebuilds, verify the condition of the 6D105-1 cylinder bores and pistons. For undercarriage rebuilds, evaluate track pitch, roller wear, and the integrity of the carrier rollers to ensure structural stability.
Seasonal & Environment Servicing
In abrasive environments, prioritize cleaning the undercarriage to prevent dust from entering pin-to-bushing clearances. During cold operations, verify the functionality of the wet, spring-friction-type damper to ensure efficient power flow. Ensure the radiator is clear of debris to maintain cooling efficiency in high-temperature summer months, and check all seals for brittleness caused by extreme temperature fluctuations.
D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 600-311-9100 | Fuel Filter Ass'Y | Fuel system service | Check fitment → |
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| 09019-08035 | Wrench,Filter (For Add. Fuel Filter) | Fuel system service | Check fitment → |
| 09637-30262 | Plate? Instruction,Air Cleaner (Double Element) | Air intake service | Check fitment → |
| 09637-02161 | Plate? Instruction,Air Cleaner (Double Element) | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 1500L0 | Transmission Clutches Double Engagement (Power train controller system) | Fault in the power train controller or clutch engagement timing. | Inspect power train controller and clutch solenoids. |
| 15G0MW | R clutch: Slipping | Low transmission oil pressure or worn reverse clutch. | Check transmission oil level and inspect clutch components. |
| 15H0MW | Hi clutch: Slipping | High-range clutch slippage due to pressure loss or wear. | Verify hydraulic/transmission oil pressure for high gear engagement. |
| 15J0MW | Lo clutch: Slipping | Low-range clutch slippage. | Check transmission oil pressure and clutch operation. |
| 15SBL1 | R clutch solenoid: Fill signal is ON when command current is OFF / Reverse clutch: Fill High | Electrical short or solenoid malfunction causing unintended engagement. | Inspect reverse clutch solenoid and wiring harness. |
| 15SJL1 | L/U: Fill High | Lock-up clutch solenoid error causing high pressure engagement. | Check lock-up clutch solenoid and control circuit. |
| 1800MW | P/L clutch: Slip | Power shift/lock-up clutch slippage. | Inspect transmission oil level and pressure. |
| B@BAZG | Engine Oil Level Low | Low engine lubricant volume. | Check engine oil level and top up if necessary. |
| B@BCNS | Engine Water Overheat | Coolant temperature exceeding safe operating limits. | Check coolant level and inspect radiator for blockage or fan failure. |
| CA144 | Coolant Temperature Sensor High Error | Faulty sensor or actual engine overheating condition. | Verify coolant temperature and inspect sensor wiring. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) attachments & work tools
Blades
Standard blade features a 3025 mm (10 ft) width, 890 mm (35 in) height, and 2.4 m³ (3.2 yd³) capacity with a 340 mm (13.4 in) cutting depth. Configuration options include straight-tilt and power angle tilt variants; aftermarket C-frame, cutting edge, and blade components are available.
Rippers
Available as single-shank or multi-shank (3-shank) configurations for digging, loading, and stump removal. Multi-shank units feature a parallelogram style with approximately 1.1 ton weight and include a single cylinder.
Winches
Not documented for this exact serial range — verify with your dealer.
Drawbars/counterweights
Not documented for this exact serial range — verify with your dealer.
Cab/ROPS guarding options
Not documented for this exact serial range — verify with your dealer.
Hydraulic arrangement notes
System utilizes a gear-type hydraulic pump with 86 L/min (22.7 gpm) discharge flow and 20.6 MPa (210 kg/cm²) relief valve setting. Control valve supports blade lift, blade tilt, and double-action piston positions.
All D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) assemblies by section
Every catalogued assembly group for the Komatsu D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
6d105-1l S/N 15149-Up
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Additional Fuel Filter
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
| 60***00 | Fuel Filter Ass'Y | 1 |
| 60***20 | Cartridge,Pref | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Air Cleaner And Mounting
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 13 |
| 01***30 | Bolt,(For France Noise Suppression) | 7 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Air Cleaner And Mounting (High Altitude Spec.)(#55043-)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 5 |
| 01***30 | Bolt,(For France Noise Suppression) | 7 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Air Intake Manifold And Connection
| 01***20 | Bolt | 2 |
| 01***50 | Bolt,(For Trimming Dozer) | 2 |
| 01***65 | Bolt,(For Alternator Bracket Mount) | 10 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Air Intake Manifold And Connection (High Altitude Spec.)(#55043-)
| 01***20 | Bolt | 2 |
| 01***50 | Bolt,(For Trimming Dozer) | 2 |
| 01***65 | Bolt,(For Alternator Bracket Mount) | 10 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator (13a)(#63408-)
| 60***60 | Alternator A. (13a),(With Non Hardening Pulley) | 1 |
| KD***31 | Bushing,Insulator | 2 |
| KD***80 | Packing | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator (25a) (For Pakistan)(#93450-)
| 60***30 | Alternator A. (25a),(With Hardening Pulley) | 1 |
| KD***57 | Bearing,Ball? Front | 1 |
| KD***80 | Collar | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator (25a)(#15149-68686)
| 60***51 | Alternator A. (25a) | 1 |
| KD***52 | Bolt,Through | 3 |
| KD***70 | Rear Bracket Ass'Y | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator (25a)(#68687-)
| 60***30 | Alternator A. (25a),(With Non Hardening Pulley) | 1 |
| KD***57 | Bearing,Ball? Front | 1 |
| KD***11 | Rear Bracket Ass'Y | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator (35a) (Hardening Pulley Type)
| 60***40 | Alternator A. (35a) | 1 |
| KD***31 | Bushing,Insulator | 2 |
| KD***57 | Bearing,Ball? Front | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator (35a) (Non Hardening Pulley Type)
| 60***60 | Alternator A. (35a),(With Non Hardening Pulley) | 1 |
| KD***31 | Bushing,Insulator | 2 |
| KD***57 | Bearing,Ball? Front | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator (50a)(#50001-)
| 60***40 | Alternator A. (50a),(With Non Hardening Pulley) | 1 |
| SD***X0 | Coil Assembly | 1 |
| SD***X0 | Washer | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator And Mounting (13a)(#63408-)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***30 | Bolt,(For Trimming Dozer) | 1 |
| 01***11 | Nut,(For Center Guard) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator And Mounting (25a)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***30 | Bolt | 1 |
| 01***30 | Bolt,(For Trimming Dozer) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator And Mounting (25a) (For Pakistan)(#93450-)
| 01***45 | Bolt,(For Suction? Reversible Fan) | 1 |
| 01***55 | Bolt | 1 |
| 01***35 | Bolt,(Cold Weather Spec.) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator And Mounting (35a) (Hardening Pulley Type)
| 01***65 | Bolt,(For Alternator Bracket Mount) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***70 | Bolt,(With Wear Guard) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator And Mounting (35a) (Non Hardening Pulley Type)
| 01***65 | Bolt,(For Alternator Bracket Mount) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***70 | Bolt,(With Wear Guard) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Alternator And Mounting (50a)(#50001-)
| 01***65 | Bolt,(For Alternator Bracket Mount) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 1 |
| 01***70 | Bolt,(With Wear Guard) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Camshaft And Tappet
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 2 |
| 01***16 | Washer,(For Shipping) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Corrosion Resistor
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 5 |
| 01***29 | Washer,Spring (Cold Weather Spec.) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Crankshaft
| 01***25 | Bolt - Rear Guard Mounting | 6 |
| 01***36 | Washer,Radio Controlled Slag Handling | 6 |
| 61***11 | Bolt,Nylock (K2) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Cylinder Block(#15149-49999)
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***75 | Bolt,(For 75a Alternator) | 1 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Cylinder Block(#50001-)
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***75 | Bolt,(For 75a Alternator) | 1 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Cylinder Head
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 2 |
| 07***08 | Plug,(Without Oil Pressure Switch) | 7 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Cylinder Head Cover(#15149-79362)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***08 | Nut (Welded) | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Cylinder Head Cover(#79363-)
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***08 | Nut (Welded) | 2 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Engine Support
| 01***40 | Bolt,(Dust And Dirt Protection) | 8 |
| 01***40 | Bolt,(Dust And Dirt Protection) | 8 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Exhaust Manifold
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***60 | Bolt (M10-1.50x60) | 1 |
| 01***00 | Bolt (M10-1.50x100) | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Exhaust Manifold And Turbocharger (High Altitude Spec.)(#55043-)
| 01***60 | Bolt (M10-1.50x60) | 1 |
| 01***00 | Bolt (M10-1.50x100) | 11 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Flywheel And Flywheel Housing
| 01***40 | Bolt,(Dust And Dirt Protection) | 9 |
| 01***60 | Bolt, Trunnion Cap | 2 |
| 01***35 | Screw | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Front Cover
| 01***22 | Bolt,(Cold Terrain Spec.) | 4 |
| 01***25 | Bolt,(Without Auto Priming System) | 4 |
| 01***60 | Bolt,(Without Alternator Bracket) | 10 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Filter
| 07***12 | Gasket,Mechanical Pump Piping | 1 |
| 07***12 | Gasket,(Without Air Compressor Type) (K1) | 1 |
| 60***10 | Plug,(For Shipping) (Not Shown) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Coupling)(#15149-49999)
| DK***00 | Bolt | 6 |
| DK***00 | Bolt | 1 |
| DK***30 | Coupling Ass'Y | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Coupling)(#50001-)
| DK***00 | Bolt | 1 |
| DK***00 | Washer,Lock | 2 |
| DK***00 | Coupling,Cross | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Feed Pump)(#15149-49999)
| DK***00 | Spring,Piston | 1 |
| DK***20 | Piston | 1 |
| DK***40 | Feed Pump Ass'Y | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Feed Pump)(#50001-)
| DK***20 | Bolt, Joint | 1 |
| DK***20 | Pump,Priming | 1 |
| DK***20 | Housing | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Governor) (1/2)(#15149-49999)
| DK***00 | Adapter | 1 |
| DK***20 | Capsule,Spring | 1 |
| DK***80 | Nut | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Governor) (1/2)(#50001-)
| DK***80 | Governor Ass'Y,(High Altitude Spec.) | 1 |
| DK***00 | Shim? 2.00mm,(High Altitude Spec.) | 0 |
| DK***00 | Adapter | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Governor) (2/2)(#15149-49999)
| DK***70 | Bolt | 2 |
| DK***40 | Gasket,Air Compressor | 2 |
| DK***00 | Nut,Cap | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Governor) (2/2)(#50001-)
| DK***40 | Gasket,Air Compressor | 2 |
| DK***00 | Nut,Cap | 1 |
| DK***40 | Bolt | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Pump) (1/2)(#15149-49999)
| 61***11 | Injection Pump Ass'Y | 1 |
| DK***30 | Bearing | 2 |
| DK***20 | Shim, 1.40mm; Was Dk029311-7220, Shim? 1.4mm | 0 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Pump) (1/2)(#50001-)
| 61***10 | Injection Pump Ass'Y | 1 |
| 61***50 | Injection Pump Ass'Y,(High Altitude Spec.) | 1 |
| 61***60 | Injection Pump Ass'Y,(Europe Spec.) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Pump) (2/2)(#15149-49999)
| DK***00 | Sleeve,Control | 6 |
| DK***00 | Screw | 6 |
| DK***00 | Spring | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump (Pump) (2/2)(#50001-)
| DK***00 | Sleeve,Control | 6 |
| DK***00 | Holder,Delivery Valve | 6 |
| DK***00 | Screw | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Injection Pump And Piping
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Nozzle And Spill Pipe(#15149-49999)
| 01***55 | Bolt,(For Trimming Dozer) | 12 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 12 |
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Fuel Nozzle And Spill Pipe(#50001-)
| 01***55 | Bolt,(For Trimming Dozer) | 12 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 12 |
| 07***12 | Gasket,Mechanical Pump Piping | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Gasket Kit
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
| 07***00 | O-Ring,(F4350-65a1 -5 ) | 1 |
| 07***45 | O-Ring,(F4320-61a0 -16 ), O-Ring; Was 07000-02145 | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Lubricating Oil Cooler(#15149-49999)
| 01***25 | Bolt,(Without Auto Priming System) | 5 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 3 |
| 01***35 | Bolt,(Without Auto Priming System) | 16 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Lubricating Oil Cooler(#50001-)
| 01***25 | Bolt,(Without Auto Priming System) | 5 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 3 |
| 01***35 | Bolt,(Without Auto Priming System) | 16 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Lubricating Oil Filter And Mounting
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***35 | Bolt,(Without Auto Priming System) | 1 |
| 01***90 | Bolt | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Lubricating Oil Pump And Suction Pipe(#15149-49999)
| 01***25 | Bolt,(Without Auto Priming System) | 3 |
| 01***50 | Bolt,(For Trimming Dozer) | 4 |
| 01***30 | Bolt,(For France Noise Suppression) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Lubricating Oil Pump And Suction Pipe(#50001-)
| 01***25 | Bolt,(Without Auto Priming System) | 3 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***40 | Bolt,(For Position Fixing) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Muffler
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***11 | Nut (M14-1.50 Thd), Nut; Was 01582-01411 | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Muffler (High Altitude Spec.)(#55043-)
| 01***40 | Bolt, Mount Retainer | 4 |
| 01***50 | Bolt | 4 |
| 01***08 | Nut (Welded) | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Oil Pan
| 01***22 | Bolt,(Cold Terrain Spec.) | 29 |
| 01***25 | Bolt,(Without Auto Priming System) | 10 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Piston And Connecting Rod
| 04***18 | Ring, Retaining | 2 |
| 61***12 | Piston Ass'Y | 6 |
| 61***30 | Piston Ring Ass'Y | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Regualtor And Heater Signal
| 60***70 | Switch,Air Intake Heater | 1 |
| 60***60 | Switch,Heater Relay | 1 |
| 60***71 | Signal,Signal | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Rocker Arm
| 01***80 | Bolt,(Shim 5 Pieces Over) | 2 |
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 12 |
| 01***36 | Washer,Radio Controlled Slag Handling | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Starting Motor (5.5kw) (Dust And Water Proof Type)
| 60***51 | Starting Motor Ass'Y,(5.5kw) | 1 |
| KD***10 | Clutch Ass'Y,Over Running | 1 |
| KD***60 | Metal,Center | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Starting Motor (5.5kw)(#15149-81558)
| 60***43 | Starting Motor A.,(5.5kw) (See Fig.0661) | 1 |
| KD***10 | Clutch Ass'Y,Over Running | 1 |
| KD***60 | Metal,Center | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Starting Motor (5.5kw)(#81559-)
| 60***80 | Starting Motor Ass'Y,(5.5kw) | 1 |
| KD***30 | Bracket,Center | 1 |
| KD***50 | Clutch Ass'Y,Over Running | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Starting Motor (7.5kw) (Bad Check And Large Capacity Type)
| 60***10 | Starting Motor Ass'Y,(7.5kw) | 1 |
| KD***80 | Washer Ass'Y,(Not Shown) | 1 |
| KD***90 | Field Coil Ass'Y | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Starting Motor (7.5kw) (For Large Capacity Type)
| 60***81 | Starting Motor Ass'Y,7.5kw | 1 |
| KD***70 | Center Bracket A | 1 |
| KD***90 | Field Coil Ass'Y | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Starting Motor And Mounting
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 3 |
| 01***36 | Washer,Radio Controlled Slag Handling | 3 |
| 07***00 | O-Ring,(F4350-65a1 -5 ) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Tool
| 09***35 | Wrench,Filter (For Add. Fuel Filter) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Turbocharger (High Altitude Spec.)(#55043-)
| 61***00 | Turbocharger Ass'Y | 1 |
| GA***00 | Clamp | 3 |
| GA***01 | Bolt | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Turbocharger Lubricating Oil Piping (High Altitude Spec.)(#55043-)
| 01***22 | Bolt,(Cold Terrain Spec.) | 2 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Water Pump And Cooling Fan
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 3 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Water Separator
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 1 |
| 60***00 | Water Separator A.,(4d105-5h? 4d105-5t) | 1 |
| 60***60 | Plug,Drain (4d105-5h? 4d105-5t) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : 6d105-1l S/N 15149-Up : Water Separator And Mounting (For Pakistan)(#86581-)
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***30 | Bolt,(Cold Weather Spec.) | 2 |
| 01***25 | Washer,Spring?(Sandy And Dusty Spec.) | 2 |
Engine Related Parts And Electrical System
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Battery
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Decelerator Pedal And Linkage(#7424-)
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***40 | Bolt | 1 |
| 01***50 | Bolt | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Electrical System (1/2)
| 01***16 | Bolt (Welded) | 2 |
| 01***16 | Bolt,(For Slag Handling) | 2 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 9 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Electrical System (2/2)
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 12 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Engine Mounting Parts
| 01***20 | Bolt,Front (Except Japan) | 2 |
| 01***45 | Bolt | 2 |
| 01***30 | Bolt,(For 187kg And 155kg) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Fuel Control Lever And Linkage
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Fuel Control Lever And Linkage (With Decelerator Pedal)(#7424-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***30 | Bolt,(For Mechanical Governor) | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Fuel Tank And Piping
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***25 | Bolt - Rear Guard Mounting | 4 |
| 01***00 | Bolt | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Instrument Panel
| 01***10 | Bolt, Mount Flasher | 2 |
| 01***20 | Screw - Turn Signal And Parkinglight Mounting | 2 |
| 01***16 | Screw | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Engine Related Parts And Electrical System : Radiator And Piping
| 01***16 | Bolt,(For Slag Handling) | 8 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 8 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 5 |
Guard
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Dashboard And Floor Plate
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 33 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Dashboard And Floor Plate (With Decelerator Pedal)(#7424-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 33 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Equalizer Bar
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 2 |
| 01***35 | Bolt,(For Pedal Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Fender And Rear Cover
| 01***25 | Bolt - Rear Guard Mounting | 4 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 14 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Hitch(#6116-)
| 01***90 | Bolt (Kit) | 4 |
| 01***60 | Bolt (Ger) | 1 |
| 01***15 | Nut (Ger) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Marks And Plates (German)(#7424-)
| 04***60 | Screw, Serial Number Plate | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Operator'S Seat
| 01***16 | Bolt,(For Slag Handling) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 8 |
| 01***20 | Bolt,(Used When Towing Winch) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Radiator Guard And Hood(#7424-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 18 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 12 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Rear Frame Box(#7424-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Rops Bracket(#7424-)
| 01***35 | Bolt, Hydraulic Tank Mounting | 8 |
| 01***40 | Bolt,(With Center Guard) | 12 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Under Guard And Front Hook(#7424-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***40 | Bolt,(With Center Guard) | 14 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Guard : Water Valve (For Car Heater)(#7424-)
| 07***59 | Clamp,See Fig. K4010-05a0 | 4 |
| 09***00 | Valve,Hose | 1 |
| 14***40 | Plug | 2 |
Main Clutch And Transmission
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : 1st Housing
| 01***30 | Bolt,(For Trimming Dozer) | 6 |
| 01***36 | Washer,Radio Controlled Slag Handling | 6 |
| 04***30 | Ring, Snap | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : 2nd Housing
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 4 |
| 04***16 | Pin, Spring | 3 |
| 09***20 | Washer,Thrust | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Damper(#6001-7494)
| 01***30 | Bolt,(For France Noise Suppression) | 12 |
| 01***45 | Bolt,(For Suction? Reversible Fan) | 12 |
| 01***45 | Bolt | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Damper(#7495-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 12 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Forward And 3rd Housing
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
| 04***16 | Pin, Spring | 3 |
| 04***15 | Ring,Back-Up | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Inching Pedal
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Inching Pedal Linkage
| 01***20 | Bolt,(Used When Towing Winch) | 2 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 1 |
| 01***50 | Screw | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Output Shaft
| 01***40 | Bolt,(Dust And Dirt Protection) | 12 |
| 01***45 | Bolt,(Cold Terrain Spec.) | 4 |
| 01***36 | Washer,Radio Controlled Slag Handling | 16 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Power Take Off
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 4 |
| 01***60 | Screw | 1 |
| 01***36 | Washer,Radio Controlled Slag Handling | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Reverse Housing
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
| 04***16 | Pin, Spring | 3 |
| 04***25 | Ring, Retaining | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Transmission Case And Filler
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 5 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***65 | Bolt,(For Suction Fan)(4d130-1d) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Transmission Control Lever
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Transmission Control Linkage
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***40 | Bolt,(Dust And Dirt Protection) | 2 |
| 01***35 | Bolt,Adjusting | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Transmission Control Valve (1/2)
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 7 |
| 01***55 | Bolt,(For Trimming Dozer) | 6 |
| 01***65 | Bolt,(For Alternator Bracket Mount) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Transmission Control Valve (2/2)(#6001-6463)
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***80 | Bolt,(See Fig.0131) | 5 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Transmission Control Valve (2/2)(#6464-)
| 01***25 | Bolt,(Without Auto Priming System) | 2 |
| 01***80 | Bolt,(See Fig.0131) | 5 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Main Clutch And Transmission : Universal Joint
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 8 |
| 12***61 | Bearing,Needle | 2 |
| 12***71 | Fitting,Grease | 1 |
Optional Parts
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Blade Control Lever (Tbg Spec.)(#7424-7818)
| 01***55 | Bolt | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Brade Control Lever (For Straight Dozer) (Reguration Of Ec Inclusion)(#7556-)
| 01***20 | Bolt | 4 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Brake Pedal (Regulation Of Ec Inclusion)(#7556-)
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***50 | Bolt,(For Strengthened Cover) | 4 |
| 01***08 | Nut,L.H. Thread | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Canopy
| 01***35 | Bolt,(For Pedal Steering) | 8 |
| 01***50 | Screw | 4 |
| 01***45 | Screw | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Dashboard And Floor Plate (Regulation Of Ec Inclusion)(#7556-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 39 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Dashboard And Floor Plate (Tbg Spec.)(#7424-7818) : Unit_02_of_02
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 33 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Dashboard And Floor Plate (Tbg Spec.)(#7424-7818) : Unit_01_of_02
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 33 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Dashboard And Floor Plate (With Decelerator Pedal) (Regulation Of Ec Inclusion)(#7556-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 39 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Drawbar (Regulation Of Ec Inclusion)(#7819-)
| 01***80 | Bolt | 6 |
| 01***60 | Bolt (Itl) | 1 |
| 01***19 | Nut - M24 | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Electrical System (1/2) (Regulation Of Ec Inclusion)(#7424-7818)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 9 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Electrical System (1/2) (Regulation Of Ec Inclusion)(#7819-)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 3 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 9 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Electrical System (2/2) (Regulation Of Ec Inclusion)(#7424-)
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 12 |
| 01***35 | Screw | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Fender And Rear Cover (Regulation Of Ec Inclusion)(#7556-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 14 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Frame (For Straight Tilt Dozer) (Tbg Spec.)(#7424-7818)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 8 |
| 01***65 | Bolt (D65p) | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Hitch (Regulation Of Ec Inclusion)(#7819-)
| 01***90 | Bolt,(Without Cap) | 4 |
| 01***60 | Bolt (Ger) | 1 |
| 01***15 | Nut (Ger) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Hydraulic Piping (Tbg Spec.)(#7424-7818)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 17 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Inching Pedal (Regulation Of Ec Inclusion)(#7556-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Inching Pedal Linkage (Regulation Of Ec Inclusion)(#7556-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 1 |
| 01***55 | Bolt,(Tree Pusher Dozer) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Instrument Panel (Regulation Of Ec Inclusion)(#7556-)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***20 | Screw - Turn Signal And Parkinglight Mounting | 2 |
| 01***16 | Screw | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Marks And Plates (English) (Regulation Of Ec Inclusion)(#7819-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 10 |
| 08***01 | Indicator,Dust Indicator | 1 |
| 09***00 | Plate? Name,Machine Model (For Ec Reg.) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Marks And Plates (French) (Regulation Of Ec Inclusion)(#7819-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 10 |
| 08***01 | Indicator,Dust Indicator | 1 |
| 09***00 | Plate? Name,Machine Model (For Ec Reg.) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Marks And Plates (German) (Regulation Of Ec Inclusion)(#7556-7818)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 10 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
| 09***35 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Marks And Plates (German) (Regulation Of Ec Inclusion)(#7819-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 10 |
| 08***01 | Indicator,Dust Indicator | 1 |
| 09***00 | Plate? Name,Machine Model (For Ec Reg.) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Marks And Plates (Tbg Spec.)(#7424-7818)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 10 |
| 09***00 | Plate? Safety,Inspection And Maintenance | 1 |
| 09***35 | Plate? Name,(Limited Supply) (German) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Mount Cushion And Floor Mat
| 01***30 | Bolt,Radio Controlled Slag Handling | 16 |
| 01***55 | Bolt,(For Reinforced Type) | 16 |
| 01***22 | Nut (Op) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Operator'S Seat (Regulation Of Ec Inclusion)(#7556-)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 8 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Operator'S Seat (Tbg Spec.)(#7424-7818)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 9 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Operator'S Seat (With Oil Damper? Reclining Device) (Regulation Of Ec Inclusion)(#7556-)
| 01***16 | Bolt,(For Slag Handling) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 9 |
| 01***20 | Bolt,(Used When Towing Winch) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Parking Brake Lever (Regulation Of Ec Inclusion)(#7556-)
| 01***40 | Bolt,(With Air Conditioner) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Parking Brake Lever (Tbg Spec.)(#7424-7818)
| 01***40 | Bolt,(With Air Conditioner) | 1 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Radiator And Piping (Regulation Of Ec Inclusion)(#7556-7818)
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Radiator And Piping (Regulation Of Ec Inclusion)(#7819-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 8 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Radiator Guard And Hood (Regulation Of Ec Inclusion)(#7556-7818)
| 01***55 | Bolt, Mount Tube To Switch Pump | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 24 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Radiator Guard And Hood (Regulation Of Ec Inclusion)(#7819-)
| 01***55 | Bolt, Mount Tube To Switch Pump | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 24 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Radiator Guard And Hood (Tbg Spec.)(#7424-7818)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 18 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 12 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Rear Frame Box (1/2) (Regulation Of Ec Inclusion)(#7556-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Rear Frame Box (2/2) (Regulation Of Ec Inclusion)(#7819-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***08 | Screw, Terminal | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Rear Frame Box (Tbg Spec.)(#7424-7818)
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Rops Bracket (Regulation Of Ec Inclusion)(#7556-)
| 01***35 | Bolt, Hydraulic Tank Mounting | 8 |
| 01***40 | Bolt,(With Center Guard) | 12 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Rops Mount Cushion And Floor Mat (Regulation Of Ec Inclusion)(#7556-)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 16 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 8 |
| 01***60 | Bolt,(For Ripper) | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Steering Case And Main Frame (Tbg Spec.)(#7424-7818)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Steering Control Lever (Regulation Of Ec Inclusion)(#7556-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Steering Control Linkage (Regulation Of Ec Inclusion)(#7556-) : Unit_01_of_02
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Steering Control Linkage (Regulation Of Ec Inclusion)(#7556-) : Unit_02_of_02
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***08 | Nut,L.H. Thread | 2 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Swing Drawbar (Reguration Of Ec Inclusion)(#7819-)
| 01***50 | Bolt,(For Tree Pusher) | 4 |
| 01***65 | Bolt, Mount Cam | 6 |
| 01***30 | Bolt | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : T00l (Regulation Of Ec Inclusion)(#7819-)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***00 | Nozzle, Grease Pump (Flexible Type) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Transmission Case And Filler (Tbg Spec.)(#7424-7818)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 5 |
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***65 | Bolt,(For Suction Fan)(4d130-1d) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Optional Parts : Transmission Control Lever (Regulation Of Ec Inclusion)(#7424-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Steering System And Final Drive
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Bevel Gear And Shaft
| 01***20 | Bolt,(Large Capacity Type) (Std) | 4 |
| 01***11 | Nut (M14-1.50 Thd), Nut; Was 01582-01411 | 8 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Brake Band
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***40 | Bolt,(For Center Guard) | 8 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Brake Pedal
| 01***30 | Bolt,(For France Noise Suppression) | 2 |
| 01***50 | Bolt - Torque Converter Totransmission Mounting | 4 |
| 01***08 | Nut? L.H. Thread,L.H. Thread | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Final Drive Gear
| 01***30 | Bolt,(For France Noise Suppression) | 24 |
| 01***25 | Bolt - Rear Guard Mounting | 4 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Final Drive Housing
| 01***40 | Bolt,(Not Used With Cab) | 50 |
| 01***70 | Bolt,(With Wear Guard) | 8 |
| 01***42 | Washer,Spring (For Pedal Steering) | 50 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Oil Cooler Piping
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***30 | Bolt,(For France Noise Suppression) | 10 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Parking Brake Lever
| 01***40 | Bolt,(For Position Fixing) | 1 |
| 01***30 | Bolt,(For France Noise Suppression) | 1 |
| 01***25 | Bolt - Rear Guard Mounting | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Sprocket And Shaft
| 01***40 | Bolt,(Not Used With Cab) | 8 |
| 01***70 | Bolt - Thrust Plate Mounting | 12 |
| 01***55 | Bolt, Strut Mounting - To Radiator And Rear Frame | 8 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Case And Main Frame
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 4 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Case Cover
| 01***40 | Bolt,(Dust And Dirt Protection) | 4 |
| 01***40 | Bolt,(Not Used With Cab) | 9 |
| 01***65 | Bolt | 10 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Clutch
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 24 |
| 01***12 | Screw,(D31s) | 2 |
| 01***10 | Nut (K10) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Control Lever
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 3 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Control Linkage (1/2)
| 01***25 | Bolt - Rear Guard Mounting | 2 |
| 01***45 | Bolt,(Cold Terrain Spec.) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Control Linkage (2/2)
| 01***30 | Bolt,Radio Controlled Slag Handling | 4 |
| 01***08 | Nut? L.H. Thread,L.H. Thread | 2 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Control Valve
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 8 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 1 |
| 01***80 | Bolt,(Shim 5 Pieces Over) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Filter
| 01***30 | Bolt,Radio Controlled Slag Handling | 3 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 2 |
| 01***36 | Washer,Radio Controlled Slag Handling | 5 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Oil Piping
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
| 01***40 | Bolt,(For Position Fixing) | 4 |
| 01***30 | Bolt,(For France Noise Suppression) | 6 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Steering System And Final Drive : Steering Pump
| 04***18 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y,(Sar040) | 1 |
| 70***10 | Seal, Oil | 1 |
Tool And Kit
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Tool And Kit : Clothes (Except Japan)
| 09***50 | Overall,(Special Order) | 1 |
| 09***57 | Cap,(Special Order) | 1 |
| 12***20 | Clothes Kit | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Tool And Kit : Service Kit
| 01***16 | Washer,Lock (Kit) | 2 |
| 04***15 | Pin,Cotter (Kit) | 1 |
| 07***12 | O-Ring, Between Valve And Pump | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Tool And Kit : Spare Parts (Except Japan)
| 04***55 | V-Belt Set,(For Trimming Dozer) | 1 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 1 |
| 07***01 | Fitting,(With Body Positioner) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Tool And Kit : Tool (Except Japan)
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***00 | Nozzle, Grease Pump (Flexible Type) | 1 |
Track
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Track : Carrier Roller
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 3 |
| 01***45 | Bolt,(For Slag Handling) | 16 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Track : Idler
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 12 |
| 01***40 | Bolt,(Not Used With Cab) | 8 |
| 01***13 | Nut - Cylinder Mounting | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Track : Recoil Spring
| 01***16 | Bolt,(Sandy And Dusty Spec.) | 2 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 6 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Track : Track Frame
| 01***30 | Bolt,(For Center Guard) | 30 |
| 01***40 | Bolt,(Not Used With Cab) | 2 |
| 01***45 | Bolt, Mount Center Hinge Retainer (Lower) | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Track : Track Roller(#6001-8191)
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 12 |
| 01***55 | Bolt,(For Long Track) | 56 |
| 01***30 | Washer,Spring(Sandy?Dusty Terrain S.) | 12 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Track : Track Shoe (Lubricate Type)(#6454-)
| 01***22 | Nut? Shoe (Kit) | 328 |
| 07***30 | Plug,(Large) | 86 |
| 07***21 | Plug,(Small) | 86 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Track : Track Shoe (Master Pin Type)
| 01***22 | Nut? Shoe (Kit) | 344 |
| 12***43 | Track Link Ass'Y | 1 |
| 12***44 | Track Link Ass'Y | 1 |
Work Equipment
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment : Straight Tilt Blade(#7424-)
| 01***80 | Bolt,(Not Shown) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***55 | Bolt,(For Reinforced Type) | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment : Straight Tilt Frame(#7424-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 8 |
| 01***65 | Bolt (D65p) | 8 |
Work Equipment Control System
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Blade Control Lever
| 01***20 | Bolt | 4 |
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 4 |
| 01***30 | Bolt,(Cold Terrain Spec.) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Blade Control Lock Lever
| 01***55 | Bolt | 1 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***19 | Washer,(Not Used With Ventilator) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Blade Lift Cylinder
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***75 | Bolt | 4 |
| 01***35 | Bolt | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Blade Tilt Cylinder
| 07***05 | O-Ring, Steering Pump Mounting | 1 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
| 07***04 | Bushing,Bushing | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Hydraulic Control Valve (1/2)
| 01***20 | Bolt (Itl) | 4 |
| 01***25 | Bolt, Seal Cover Mounting | 2 |
| 01***30 | Bolt | 2 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Hydraulic Control Valve (2/2)
| 01***05 | Nut,(For Air Conditioner Less), Nut | 1 |
| 07***12 | O-Ring (Itl) | 1 |
| 07***12 | Ring,Back-Up; Was 07001-02012, Ring,Back-Up (Itl) | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Hydraulic Oil Piping (Tank To Pump To Valve)
| 01***40 | Bolt,(For Position Fixing) | 4 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 4 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Hydraulic Oil Piping (Valve To Lift Cylinder)
| 01***50 | Bolt,(For Trimming Dozer) | 4 |
| 01***30 | Bolt,(For France Noise Suppression) | 6 |
| 01***11 | Nut,(With Under Mirror) | 14 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Hydraulic Oil Piping (Valve To Tilt Cylinder)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt - Rear Guard Mounting | 17 |
| 01***30 | Bolt,Radio Controlled Slag Handling | 3 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Hydraulic Pump
| 04***18 | Ring, Retaining | 1 |
| 70***10 | Pump Ass'Y,(Sar040) | 1 |
| 70***22 | Bracket Ass'Y | 1 |
Komatsu : D41p-3(S/N 6001-Up (For Eu / Straight Tilt Dozer)) : Work Equipment Control System : Hydraulic Tank And Filter
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 10 |
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***30 | Bolt,(For Center Guard) | 4 |
Frequently asked questions
What engine is used in the Komatsu D41P-3?
The machine is powered by a Komatsu 6D105-1, 6-cylinder diesel engine.
What is the operating weight of this model?
The operating weight is approximately 10,620 kg (23,413.1 lb).
What replaced the D41P-3?
Specific successor models are not documented in the provided technical data; however, it belongs to the D-series crawler tractor lineage.
What D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) owners discuss
What are the known transmission engagement issues for the D41P-3?
Operators have reported instances where the transmission fails to engage in forward gear while reverse remains functional; in such cases, shifting from reverse to forward may temporarily restore pushing capability. Additionally, a 2 to 3-second delay in engagement has been noted during operation.
What hydraulic system failure should be monitored regarding fluid contamination?
There are reports of hydraulic oil migrating into the transmission system, which may indicate a blown shaft seal within the pump. Have your dealer verify.
What is the engine configuration and power output for this model?
The machine utilizes a Komatsu 6D105-1, 6-cylinder, water-cooled diesel engine. Power output varies by configuration/series: documented values include 93 hp (67 kW), 93 hp (69.4 kW), and 95.2 hp (71 kW).
What undercarriage wear patterns or specifications are typical for this machine?
The undercarriage features a track pitch of approximately 180 mm (7 in) and a standard shoe size of roughly 720 mm (28 in). The system uses 6 track rollers and 1 carrier roller per side, with 43 shoes per side.
What should be checked when purchasing a used D41P-3 (S/N 6001-UP)?
Verify the serial number on the chassis plate against the engine block serial to ensure they match, as discrepancies are primary signals of stolen equipment. Additionally, check for any gaps between telematics hours and dashboard hour-meter readings, as a difference exceeding 50 hours may indicate meter rollback.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Komatsu D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)). Related factory variants of the same model family:
D41P-3(S/N 6001-UP (Straight Tilt Dozer))
Need a specific D41P-3(S/N 6001-UP (For EU / Straight Tilt Dozer)) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.