Komatsubulldozerlarge (d80 - )
Komatsu D375A-5(S/N 18001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu D375A-5 (S/N 18001-UP) is a large mining/heavy-construction class crawler bulldozer built for mass excavation, overburden removal, haul-road building, and quarry or mine-site preparation. It is powered by a 6-cylinder, turbocharged and aftercooled diesel from Komatsu's 170-series family - documented in different Komatsu and parts-supplier references under both the SA6D170E-3 and SAA6D170E-5 designations - rated at a net 391 kW / 525 HP (gross approximately 452 kW / 606 HP) at 1,800 rpm and meeting EPA Tier 3 / EU Stage IIIA emissions limits with cooled exhaust-gas recirculation. Operating weight is reported in a range of roughly 66,985-69,600 kg (147,680-153,440 lb) depending on blade, ripper, and undercarriage configuration, drawn on a Komatsu TORQFLOW torque-converter/planetary powershift transmission with electronic control of the transmission, torque converter, and steering clutches/brakes. The -5 series was produced through the mid-to-late 2000s, following the D375A-3 (S/N 17001-UP) as its direct predecessor and preceding the D375A-6 and later D375A-8 in Komatsu's D375 lineage. Configurations offered on this platform include a box-type or semi-U dozer blade, standard or wider track-shoe/gauge undercarriage options, and a choice of single-shank or multi-shank ripper attachments for ripping compacted rock and hard-pan ahead of the blade.
Compared with the D375A-3 it replaced, the D375A-5 introduced a more thoroughly electronically-managed power train - coordinating engine, torque converter, transmission, and steering clutch/brake behavior for better fuel efficiency and operator control - while adopting cooled EGR to meet tighter Tier 3/Stage IIIA emissions rules without the diesel particulate filter and aftertreatment complexity that later Tier 4 machines require. The following D375A-6 generation pushed engine output notably higher, and the current D375A-8 moved to Tier 4 Final aftertreatment, adding cost and maintenance complexity that many owners of older fleets prefer to avoid. This makes the D375A-5 (S/N 18001-UP) attractive today in the used and parts market: it combines a modern, electronically controlled power train and a durable large-bushing, segmented-sprocket undercarriage with a mechanically simpler, non-DPF engine that is comparatively inexpensive to keep running, so demand for its common wear items - undercarriage components, hydraulic seals and filters, power-train seals, and cooling-system parts - remains steady even as new-machine sales have shifted to later Tier 4 D375A models.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu D375A-5(S/N 18001-UP) specifications
Identification
| Model / Serial Range | Komatsu D375A-5, S/N 18001-UP (base D375A-5 series; distinct from later D375A-5 S/N 55001-UP W/O EGR variant, which is not covered here) |
| Production Era | Approx. mid-2000s (sources place this generation around 2004-2009); shop manual SEBM023508 issued 2005 |
| Machine Type | Large crawler tractor / mining-class bulldozer |
Engine
| Engine Model | Komatsu SA6D170E-3 (S/N 18001-UP). Note: some European Komatsu archive/brochure pages label a same-era D375A-5 with engine SAA6D170E-5 (452 kW/606 HP) — likely a regional/later emissions-label variant; treat as unverified for this exact S/N range and defer to SA6D170E-3 as primary |
| Configuration | 6-cylinder, 4-cycle, water-cooled, in-line vertical, direct injection, turbocharged with air-to-air aftercooling and cooled EGR |
| Bore x Stroke | 170 x 170 mm |
| Displacement | 23.15 L (1,413 cu in) |
| Gross Power | ~452 kW / 605-606 HP @ 1,800 rpm (gross, SAE J1995) |
| Net Power | 391 kW / 525 HP @ 1,800 rpm (net) |
| Maximum Torque | ~2,648 Nm (270 kgm) @ 1,300 rpm (single-source figure, not cross-verified) |
| Emissions | Meets EPA Tier 3 / EU Stage IIIA equivalent emissions regulations for this generation |
| Governor | Electronic all-speed governor |
Weights (varies by configuration)
| Bare Tractor Weight | ~49,800 kg (single-source figure) |
| Operating Weight - Standard (with Semi-U blade, per official Komatsu brochure) | 66,985 kg (147,680 lb) |
| Operating Weight - Fully Equipped (ROPS cab, A/C, accessories) | ~68,500 kg (single-source figure) |
| Operating Weight - Alternate reported figure (likely with ripper or later spec update) | 69,558 kg (153,350 lb) |
| Note on weight variance | Operating weight varies by configuration (blade type, ripper fitment, cab/accessories) and by source; treat 66,985-69,558 kg as the plausible range for this serial range rather than a single fixed figure |
Dimensions
| Overall Length (with standard blade) | ~10.33-10.42 m (33.9-34.2 ft), varies slightly by blade/ripper configuration and source |
| Overall Width (over tracks) | ~2.50 m (8.2 ft) track gauge width; wider figures (~4.0-4.7 m) reported by some sources appear to reference blade width rather than track width |
| Overall Height (to cab top) | ~4.23-4.30 m (13.9-14.1 ft); ROPS cab adds to base height |
| Minimum Ground Clearance | ~0.61 m (2.0 ft / 24 in) |
| Turning Radius | ~4.2 m (single-source figure) |
| Track Shoe Width (standard) | 610 mm (24 in), single-grouser, extreme-service, lubricated-type |
| Track Shoe Width (wider options per parts catalog) | 710 mm and 810 mm wider shoe options also cataloged for this serial range, for softer ground/lower ground pressure applications |
| Track Rollers per Side | 7-roller track frames per official Komatsu brochure text; 8-roller variant reported elsewhere — defer to OEM brochure text |
| Track Shoes per Side | Reported as 41 shoes per side by aggregator sources (not independently cross-verified against OEM literature) |
| Ground Contact Area | ~7,527 sq in |
Performance
| Transmission | Komatsu TORQFLOW torque-converter powershift transmission, 3 forward / 3 reverse speeds, PCCS joystick lever control with wet multiple-disc steering clutches |
| Travel Speed - Forward | 1st: ~3.8 km/h (2.4 mph); 2nd: ~6.8 km/h (4.2 mph); 3rd (max): ~11.75-11.8 km/h (7.3 mph) |
| Travel Speed - Reverse | 1st: ~5.1 km/h (3.2 mph); 2nd: ~9.2 km/h (5.7 mph); 3rd (max): ~15.77-15.8 km/h (9.8 mph) |
| Ground Pressure - Bare Tractor | ~103.2 kPa (1.06 kgf/cm²) (single-source figure) |
| Ground Pressure - With Semi-U Dozer Blade | ~125.5 kPa (1.28 kgf/cm²) (single-source figure) |
| Ground Pressure - With Semi-U Blade + Ripper (fully equipped) | ~140.4 kPa (1.43 kgf/cm²); ~20.3 psi |
| Gradeability | ~30 degrees maximum grade climbing angle (single-source figure, typical for this class of dozer) |
| Stability Angle | ~35 degrees front/rear/left/right (single-source figure) |
| Drawbar Pull | Not published by manufacturer as a single peak figure for this model; Komatsu spec literature for this dozer class typically presents drawbar pull as a performance curve (pull vs. speed) rather than one number. |
| Hydraulic Relief Pressure | ~2,990 psi (single aggregator source) |
| Hydraulic Pump Flow | ~107 gpm (405 L/min) (single aggregator source) |
Blades
| Blade Types Offered | Semi-U (SU) dozer blade and U dozer blade; no A-blade, S-blade, or VPAT variant found offered for this large mining-class dozer |
| Semi-U Blade Capacity | 18.5 m³ (24.2 yd³) per SAE J1265; one lower-confidence source reports 24.0 m³, likely a scrape/measurement-standard discrepancy |
| Semi-U Blade Width / Height | ~4,695 mm width x 2,265 mm height |
| U Blade Capacity | 22.0 m³ (28.8 yd³) per SAE J1265; one lower-confidence source reports 26.3 m³ |
| U Blade Width / Height | ~5,140 mm width x 2,265 mm height |
Service Capacities
| Fuel Tank | ~1,048 L (277 US gal); one OCR-scraped source reports ~478 L, likely a scrape error (inconsistent with D375A-6 ~1,200 L) |
| Engine Oil (refill capacity) | ~85.9 L (22.7 US gal) per aggregator sources |
| Hydraulic System (refill capacity) | ~138.2 L (36.5 US gal) per aggregator sources |
| Cooling System (coolant capacity) | ~120 L (31.7 US gal) per aggregator sources |
| Final Drive (per side, refill capacity) | ~64.7 L (17.1 US gal) per aggregator sources |
| Note on service capacities | One OCR-scraped source gave substantially different values (engine oil 275 L, hydraulic 1,050 L, coolant 165 L) that do not internally reconcile with the aggregator figures; these are treated as lower-confidence due to apparent table/row misalignment in that source and are not used as primary values |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
D375A-5(S/N 18001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (incl. filter) — SA6D170E-3, 6-cyl., 23.15 L turbocharged/aftercooled diesel | approx. 86 L (22.7 US gal); consistently cross-verified across three independent capacity references | Komatsu genuine EO engine oil; grade selected by ambient temperature per OMM chart — typically SAE10W in very cold climates, SAE10W-30 for moderate cold, SAE15W-40 for temperate/warm, SAE30 for sustained hot climates; API CF/CD-class or better diesel engine oil |
| Cooling system (radiator + engine) | approx. 120 L (31.7 US gal); one source lists ~165 L (43.6 US gal) — treat as source discrepancy, likely a data error or differently configured cooling package | Komatsu Super Coolant AF-NAC (or equivalent ethylene-glycol permanent-type antifreeze/coolant meeting Komatsu spec), premixed to the freeze-protection ratio appropriate for the operating climate |
| Fuel tank | approx. 1,048–1,050 L (277 US gal); consistent across all sources checked | ASTM D975 No. 2-D diesel fuel for normal conditions; No. 1-D (or winter-blended No.2-D) recommended by Komatsu for cold ambient temperatures (below approx. -10°C) to prevent waxing |
| Powertrain (torque converter + powershift transmission + bevel gear/steering clutch-brake compartments) | sources disagree on how this is split: one aftermarket capacity guide lists a standalone 'transmission' figure of approx. 23 L (6.1 US gal), while another spec-sheet-derived figure describes a combined torque converter/transmission/bevel-gear/steering system capacity of approx. 150 L; this is plausible because Komatsu's large-dozer power train (torque converter, powershift transmission, bevel gear, and steering clutch/brake packs) commonly shares one hydraulically linked oil circuit rather than fully isolated sumps — could not directly confirm the OMM's exact per-compartment breakdown from accessible public text, so treat both figures as approximate and verify against the printed OMM refill table before service | Komatsu genuine TO powertrain oil — TO10 (SAE10W) for cold-climate operation, TO30 (SAE30) for temperate/warm climates, per the OMM ambient-temperature selection chart; equivalent heavy-duty transmission/drive-train oil (TDTO-class) acceptable per Komatsu's non-genuine-oil recommendation table |
| Final drive, each side | approx. 64.7–65 L (17.1 US gal) per side | Komatsu genuine TO powertrain oil (same TO10/TO30 family used for transmission/final drive per Komatsu literature), grade by ambient temperature; some Komatsu documentation instead designates a dedicated AXO axle oil for final drive/differential service — confirm exact designation against the printed OMM |
| Hydraulic system/tank | approx. 138 L (36.5 US gal) | Komatsu genuine HO46-HM hydraulic oil (ISO VG46, meeting Komatsu's internal hydraulic-oil spec); HO68-HM alternative for sustained high-ambient-temperature operation; grade selection follows the OMM's ambient-temperature chart |
| Pivot shaft / equalizer bar | not clearly documented in accessible public sources for this exact S/N range; the equalizer bar center pin is a remote grease point (not an oil-fill compartment) on standard D375A-5 configurations, while some dual-tilt-pitch-dozer blade configurations reference an oil-filled pivot/recoil chamber — exact capacity could not be confirmed | Komatsu genuine grease per OMM lubrication chart (see grease specs below); consult printed OMM lubrication diagram for exact pivot-shaft servicing method on this configuration |
| Grease (all chassis/undercarriage/work-equipment points) | quantity per point not numerically specified in accessible sources; serviced per OMM lubrication interval chart | Komatsu genuine G2-LI multipurpose lithium EP grease (NLGI 2) for normal-temperature, light-to-moderate-load points (rollers, idlers, standard pins, points exposed to water/steam); Komatsu genuine molybdenum-disulfide EP grease (LM-G / G2-M) for heavy-load oscillating points such as the equalizer bar center pin, track/blade linkage pins, and other high-pressure joints per the OMM lubrication diagram |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu D375A-5(S/N 18001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 10,000 h |
|
Servicing the D375A-5(S/N 18001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis for the D375A-5
Track the 170-series turbocharged diesel and TORQFLOW power train through scheduled oil sampling of engine, torque converter/transmission, final drive, and hydraulic tank oil rather than hours alone. Watch exhaust color and blow-by for early turbocharger or injector drift, and trend torque converter/damper case oil condition since damper wear shows up as vibration before it shows up as a fault code. Pair fluid trending with periodic undercarriage wear checks on the segmented sprocket, rollers, and idler to schedule turns before metal-to-metal wear accelerates.
Corrective & Common Repairs on the D375A-5
Recurring corrective work centers on the undercarriage: bolt-on segmented sprocket teeth wear unevenly and are replaced in place, while roller and idler oil seals eventually weep and need reseal or exchange. On the power train, torque converter/damper case oil leaks and steering clutch or brake adjustment drift are common corrective items. Hydraulic cylinders for blade lift/tilt and ripper shank actuation are periodically reseal-ed for rod or barrel leakage, and the multi-monitor/electronic control harness is a frequent diagnostic point for power-train fault codes.
Overhaul & Rebuild Points for the D375A-5
Major rebuild decisions on this machine follow condition rather than a fixed hour number: engine top-end or in-frame overhaul once compression and oil-analysis trends decline, torque converter and powershift transmission rebuild when clutch slippage appears, and final drive planetary/steering clutch rebuild when case-oil metal content rises. Undercarriage rebuild - chain, rollers, idlers, and sprocket segment renewal - is the single largest recurring overhaul cost given the machine's operating weight class, and the box/semi-U blade push-arms and trunnions should be inspected for cracking at the same milestones.
Seasonal & Environment Servicing for the D375A-5
In cold climates, use the coolant/fuel and engine-oil viscosity grades matched to ambient temperature, drain the fuel/water separator more often as condensation increases, and confirm block-heater and battery/starting-aid function before winter shutdown periods. In hot, dusty mine or quarry settings, shorten air-cleaner element service intervals, clean radiator and oil-cooler cores more frequently to protect the turbocharged diesel from heat soak, and step up undercarriage and hydraulic oil sampling frequency since abrasive fines accelerate seal and roller wear.
D375A-5(S/N 18001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 6217-71-6470 | Plate? Caution,Fuel Filter | Fuel system service | Check fitment → |
| 09637-90263 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
| 09637-30163 | Plate? Instruction,Air Cleaner (Single Element) | Air intake service | Check fitment → |
| 09637-30263 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
| 09637-81163 | Plate? Instruction,Air Cleaner Element Mainte | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
D375A-5(S/N 18001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| DK30KA | Steering potentiometer 1 (left) circuit disconnection (open circuit) | Open circuit in the wiring or connector between the steering lever position sensor and the PCCS controller, or a failed potentiometer | Check the potentiometer connector and harness for corrosion or a broken wire before replacing the sensor |
| DK30KB | Steering potentiometer 1 (left) short circuit | Chafed or pinched harness wiring shorting to ground or to another circuit near the PCCS lever pod | Inspect harness routing at the lever console for damage and test the sensor circuit resistance against spec before swapping the potentiometer |
| DK30KX | Steering potentiometer 1 input signal out of range (main/sub signal disagreement) | Worn or mis-adjusted potentiometer, linkage out of calibration, or a marginal connector causing an out-of-range voltage reading at the controller | Recheck lever linkage adjustment and sensor calibration, then verify signal voltage at the controller connector |
| DK31KA | Steering potentiometer 2 (right) circuit disconnection (open circuit) | Open circuit in the right-side steering position sensor wiring or a failed potentiometer, mirroring the DK30 left-side fault | Check the right-side potentiometer connector and harness continuity before replacing the sensor |
| DK40KA | Brake potentiometer circuit disconnection (open circuit) | Broken wire or loose connector at the brake pedal/lever position sensor feeding the PCCS controller | Inspect the brake potentiometer harness and connector, repair or replace as needed, then recheck for the code to clear |
| DK40KB | Brake potentiometer short circuit | Damaged insulation allowing the brake sensor signal wire to short to ground or another circuit | Trace and repair the shorted harness section, then verify sensor output before returning to service |
| DK56KA | Direction (forward/reverse) potentiometer 1 circuit disconnection (open circuit) | Open circuit in the direction-lever position sensor wiring or a failed potentiometer on the FNR selector | Check the direction potentiometer connector and wiring for an open circuit before replacing the sensor |
| DK55KX | Direction potentiometer input signal out of range (main/sub signal disagreement) | Direction lever linkage out of adjustment or a degraded potentiometer producing a signal outside the expected calibration window | Verify direction lever linkage adjustment and sensor calibration, then confirm signal voltage at the controller |
| DB30KT | Steering (PCCS) controller internal abnormality | Internal fault within the PCCS steering controller itself rather than the external sensor wiring | Confirm the fault is not caused by wiring or sensor issues first, then substitute or replace the steering controller per the shop manual procedure |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
D375A-5(S/N 18001-UP) attachments & work tools
Blades
The D375A-5 (18001-UP) is offered with a Semi-U (SU) dozer blade of about 18.5 m³ (24.2 yd³) capacity, ~4,695 mm width, ~2,265 mm height, and 55° cutting angle, or a full U-dozer blade of about 22.0 m³ (28.8 yd³) capacity, ~5,140 mm width and ~2,670 mm height; both are offered in standard and strengthened (heavy-duty) versions. A factory dual-tilt option is available on either blade for productivity in hard/uneven material. This size class is not offered with a straight 'S' or angling 'A' dozing blade, and VPAT is a Caterpillar-specific blade-tilt term with no Komatsu equivalent, so it does not apply to this model.
Rippers
Two ripper attachments are documented for this model: a multi-shank (3-shank) hydraulic parallelogram ripper with stepless ripping-angle adjustment, weighing about 6,720 kg (14,810 lb) including its hydraulic control unit, beam length ~2,854 mm (9'4"), max lift above ground ~1,050 mm (3'5"), and max digging depth ~1,075 mm (3'6"); and a lighter single-shank 'giant'/variable ripper for tougher material with 3-stage hydraulic penetration adjustment, weighing about 5,470 kg (12,060 lb). Lift/dig-depth figures for the single-shank unit vary slightly by literature revision (roughly 1,020-1,140 mm), so treat those as approximate/configuration-dependent.
Winches
No factory cable winch option is documented for the D375A-5; third-party winch-fitment charts (e.g., Allied) for Komatsu crawler dozers top out around the D155AX class, well below this machine's ~67-70 tonne weight class. As a large mining/production dozer, the D375A-5 is built for dozing and ripping duty rather than cable-arch or skidding work, so winches are neither offered nor commonly retrofitted on this model.
Drawbars/counterweights
Published literature references an optional counterweight for the D375A-5 (used to balance the machine for certain blade/ripper combinations) but no standalone drawbar-pull rating specific to serial range 18001-UP was found in available sources; these figures vary by blade/ripper/undercarriage configuration and should be confirmed against a dealer configuration sheet or the shop manual (SEBM023508) rather than a single published number.
Cab/ROPS guarding
The D375A-5 uses a standard sealed, pressurized, air-conditioned ROPS/FOPS cab; optional protection includes a vandalism-protection kit and spill guards fitted to the semi-U and U blade lift arms per the field assembly manual. Unlike Komatsu's smaller dozers (D65/D85/D155 class), no dedicated forestry or waste-handling guarding package (e.g., full screen/grille canopy kits) is documented for this model - guarding options here are limited to general debris/vandalism protection rather than a forestry-spec variant.
Hydraulic arrangement
The work-equipment circuit uses a gear-type hydraulic pump with a maximum flow of about 405 L/min and a relief-valve setting of about 210 kg/cm² (~20.6 MPa); spool control valves are externally mounted beside the hydraulic tank for service access. Blade lift/tilt/angle functions (raise, hold, lower, float) and, when a ripper is fitted, its lift/tilt circuit share this same pump and valve arrangement, with the optional dual-tilt blade circuit adding tilt control to either the semi-U or U blade.
All D375A-5(S/N 18001-UP) assemblies by section
Every catalogued assembly group for the Komatsu D375A-5(S/N 18001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Accessory
Komatsu : D375a-5(S/N 18001-Up) : Accessory : Cap And Overall
| 09***50 | Overall,(Special Order) | 1 |
| 09***50 | Cap And Overall Kit | 1 |
| 09***57 | Cap,(Special Order) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Accessory : Inspection Lamp
| 08***20 | Bulb? 25w,Turn Signal And Back-Up Lamp | 2 |
| 17***70 | Lamp,Russian (Op) | 1 |
| 17***70 | Cable (Op) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Accessory : Spare Parts
| 04***77 | V-Belt Set,Ec | 1 |
| 07***75 | O-Ring (Kit) | 2 |
| 07***80 | O-Ring (Kit) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Accessory : Spare Parts (Additional Filter Spec.)
| 04***77 | V-Belt Set,Ec | 1 |
| 07***75 | O-Ring (Kit) | 2 |
| 07***80 | O-Ring (Kit) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Accessory : Spare Parts (Noise Suppression Spec.For Eu And Water Separator)
| 04***79 | V-Belt Set | 1 |
| 07***75 | O-Ring (Kit) | 2 |
| 07***80 | O-Ring (Kit) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Accessory : Spare Parts (Noise Suppression Spec.For Eu)
| 04***79 | V-Belt Set | 1 |
| 07***75 | O-Ring (Kit) | 2 |
| 07***80 | O-Ring (Kit) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Accessory : Tool
| 07***50 | Pump, (Bellows Type) | 1 |
| 07***03 | Cartridge - Grease | 1 |
| 07***00 | Nozzle, Grease Pump (Flexible Type) | 1 |
Cooling System
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Fan Velt
| 04***77 | V-Belt Set,Ec | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Fan Velt (For High Speed Fan)
| 04***75 | V-Belt Set,Reversible | 1 |
| 19***70 | Pulley,Hi Speed | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Fan Verlt (10%Up)(#18575-)
| 04***75 | V-Belt Set,Reversible | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Hydraulic Oil Cooler Piping
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Hydraulic Oil Cooler Piping (For Cushion Dozer)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Oil Cooler And Oil Line
| 01***30 | Bolt,(With Body Positioner) | 32 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 8 |
| 01***40 | Bolt (Op) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Oil Cooler Piping
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 5 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Oil Cooler Piping (With Oil Pan Heater)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Radiator Fan Belt (Reversible)
| 01***25 | Capscrew | 1 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 1 |
| 04***77 | V-Belt Set,Ec | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Radiator Piping
| 01***40 | Bolt (Op) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Cooling System : Radiator Piping (With Oil Pan Heater)
| 01***40 | Bolt (Op) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Electrical System
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Battery
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
| 08***21 | Battery? Wet,(C200 Or F300-20) (C200) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Ender Wiring (L.H.)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Fender Wiring (L.H.) (For Vhms Kit)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Fender Wiring (With Dust Indicator And Vhms)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Fender Wiring (With Dust Indicator)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Fender Wiring (With Shoe Slip Control And Dust Indicator)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Fender Wiring (With Shoe Slip Control And Dust Indicator) (For Saudi)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Fender Wiring (With Shoe Slip Control And Vhms)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Fender Wiring (With Shoe Slip Control)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Fender Wiring (With Shoe Slip Control?Dust Indicator And Vhms )
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Fender Wiring (With Vhms)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Electrical System : Vhms Downroad Wiring (With Vhms)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
Engine Related Parts
Komatsu : D375a-5(S/N 18001-Up) : Engine Related Parts : Air Conditioner Piping
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***25 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Engine Related Parts : Alternator Harness
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 04***10 | Clip,(With Accumulator) | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Engine Related Parts : Alternator Harness (For Heavy Duty Harness)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 04***10 | Clip,(With Accumulator) | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Engine Related Parts : Damper
| 01***16 | Bolt - Seat And Tether Belt Mounting | 12 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 14 |
Komatsu : D375a-5(S/N 18001-Up) : Engine Related Parts : Engine Mount
| 01***30 | Bolt - M14 X 30lg | 8 |
| 01***85 | Bolt | 8 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Engine Related Parts : Heat Shield (For Muffler)
| 01***20 | Bolt | 8 |
| 01***25 | Bolt,Joint | 14 |
| 01***30 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Engine Related Parts : Heater Piping
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***05 | Capscrew | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Engine Related Parts : Heater Piping (Additional Heater)(#18087-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***05 | Capscrew | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Engine Related Parts : Muffler And Drain Tube
| 01***30 | Bolt | 2 |
| 01***85 | Bolt | 4 |
| 01***30 | Bolt | 2 |
Fuel Tank And Related Parts
Komatsu : D375a-5(S/N 18001-Up) : Fuel Tank And Related Parts : Fuel Line (With Cooler Bypas Valve)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Fuel Tank And Related Parts : Fuel Piping
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Fuel Tank And Related Parts : Fuel Piping (For Cushion Dozer)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Fuel Tank And Related Parts : Fuel Quick Charge Receiver
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 6 |
| 07***15 | O-Ring,(Y1621-01a0-10) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Fuel Tank And Related Parts : Fuel Tank (With Quick Charge And Heavy Duty Harness)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Fuel Tank And Related Parts : Fuel Tank (With Quick Charge)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Fuel Tank And Related Parts : Fuel Tank (Without Quick Charge)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***05 | Bolt, Yoke Mounting | 4 |
Guard
Komatsu : D375a-5(S/N 18001-Up) : Guard : Accumulator
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Air Compressor Tank Receiver
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Battery (Large Capacity) And Starting Harness
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***80 | Bolt | 1 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Battery And Starting Harness
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***80 | Bolt | 1 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Battery And Starting Harness (With Air Con) (With Ripper) (C200)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***80 | Bolt | 1 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Battery Relay And Starting Harness
| 01***12 | Bolt - M8 - 1.25 X 12 | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Blade Lift Line Joint Block
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Blade Lift Line Joint Block (For Ka)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***45 | Bolt,(With Water Separator Type) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Blade Tilt Line (For Dual Tilt Pitch Dozer)
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Blade Tilt Line (Tank Tube)
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***23 | Washer,(For Shipping) | 8 |
| 07***30 | O-Ring,Boom (For 50 Feet Long Front) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Blank Parts (Without Ripper)
| 01***30 | Bolt - M8 X 30lg | 16 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Condenser And Bracket
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Corrosion Resistor Piping (For Saudi)
| 01***35 | Bolt,(For Fix Position) | 1 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Dual Tilt Pitch Valve
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Dual Tilt Pitch Valve (For Heavy Duty Harness)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Dush Cover
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***45 | Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Dush Cover (For Vhms)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 19 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Dush Cover (Without Side Cover)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***45 | Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Hood (Closed)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***35 | Bolt,(With Rops) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Hood (Closed) (For Vhms)(#18656-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***35 | Bolt,(With Rops) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Hood (Noise Suppression Spec.For Eu)
| 01***20 | Bolt,(For Mono Lever Steering) | 24 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Hood (Perforated)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***35 | Bolt,(With Rops) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Hood (Perforated) (For Vhms)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***35 | Bolt,(With Rops) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Hood And Side Cover (Open)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Cover (L.H.) (Closed)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Cover (L.H.) (Noise Suppression Spec.For Eu)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Cover (L.H.) (Perforated)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Cover (L.H.) (Std)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Cover (R.H.) (Closed)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Cover (R.H.) (Noise Suppression Spec.For Eu)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Cover (R.H.) (Perforated)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Cover (R.H.) (Std)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Low Cover (L.H.) (Noise Suppression Spec.For Eu)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Engine Side Low Cover (R.H.) (Noise Suppression Spec.For Eu)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fan Drive
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fan Drive (Noise Suppression Spec.For Eu)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fan Drive High Speed Pulley (For Ka)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fan Guard
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fan Guard (For Ka)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 20 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender (For Ec And Japan)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender (With Vhms)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 20 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Related (1/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 20 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 12 |
| 01***75 | Bolt | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Related (2/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 29 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***55 | Capscrew - M24 (2) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Related (2/2) (For Ec. And Japan)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 30 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***55 | Capscrew - M24 (2) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Related (2/2) (With Vhms)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 29 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***55 | Capscrew - M24 (2) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Wiring (L.H.)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 17 |
| 01***80 | Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 18 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Wiring (L.H.) (For Heavy Duty Harness)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 15 |
| 01***80 | Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Wiring (L.H.) (For Saudi)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 17 |
| 01***80 | Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 18 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Wiring (L.H.) (For Vhms Kit)
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
| 04***12 | Clip | 3 |
| 04***12 | Clip | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Wiring (L.H.) (With Vhms)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 17 |
| 01***80 | Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 18 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Wiring (R.H.)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 04***12 | Clamp | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Wiring (R.H.) (For Heavy Duty Harness)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 7 |
| 04***12 | Clamp | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Wiring (R.H.) (With Vhms)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 04***12 | Clamp | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fender Wiring Clip Group (L.H.) (For Vhms Kit)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 13 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 13 |
| 04***12 | Clamp | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fuel Cooler
| 01***55 | Bolt,(See Service News) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fusible Link (For Heavy Duty Harness)(#18001-18363)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Screw | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fusible Link (For Heavy Duty Harness)(#18364-)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fusible Link(#18001-18363)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***30 | Screw | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Fusible Link(#18364-)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Head Lamp And Wiring
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Head Lamp And Wiring (For Heavy Duty Harness)
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Head Lamp And Wiring (Noise Suppression Spec.For Eu)
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Heater Piping Block (Additional Heater)(#18087-)
| 01***65 | Bolt,(Used With Pin Puller) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 14***10 | Joint,Hose | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Hydraulic Oil Cooler
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***65 | Bolt,(Used With Pin Puller) | 1 |
| 01***85 | Bolt,(Used With Pin Puller) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Hydraulic Tank
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Hydraulic Valve Line
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 4 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Lift Cylinder Support
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***60 | Capscrew | 2 |
| 01***00 | Capscrew | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Lift Cylinder Support (For Ka)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***60 | Capscrew | 2 |
| 01***00 | Capscrew | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Lift Cylinder Support Sub
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| 07***00 | Fitting, Grease (Steering Cylinder) | 2 |
| 17***90 | Pin,Knock | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : P.P.C. Valve
| 01***90 | Capscrew | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Plug And Connector (For Single Tilt Spec.)
| 08***70 | Plug, Sealing | 2 |
| 08***00 | Body Receptacle Connector | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Pre Cleaner Duct (Turbo 2)
| 01***45 | Screw | 1 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Pre Cleaner Duct Joint (Turbo 2)
| 01***45 | Screw | 1 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Pre Cleaner Hood And Dush Cover (For Enginaire)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***45 | Screw | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator
| 01***20 | Bolt,(For Mono Lever Steering) | 13 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 124 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator (For Ka)
| 01***20 | Bolt,(For Mono Lever Steering) | 13 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 124 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Grill
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 19***90 | Grille | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Guard
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 13 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Guard (For Heavy Duty Harness)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Guard (For Landfill Spec.)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Guard (Noise Suppression Spec.For Eu)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 13 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Guard Retated
| 01***45 | Bolt, M14x2.0x45 | 4 |
| 01***50 | Bolt,(For Large Size Tire) | 4 |
| 01***55 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Mask (For Landfill Spec.)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***45 | Bolt,(For 60ton Dump Body) | 15 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Mask (Grid)
| 01***45 | Bolt,(For 60ton Dump Body) | 6 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 6 |
| 19***83 | Mask | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Mask (Noise Suppression Spec. For Eu)
| 01***20 | Bolt,(For Mono Lever Steering) | 72 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 54 |
| 01***35 | Bolt,(With Rops) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Radiator Mask (Perforated)
| 01***85 | Bolt | 8 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| 19***70 | Mask,(For Cold Weather) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Rear Cover
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***50 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Rear Cover (With Vhms)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***50 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Resereve Tank And Jointo Block (For Ka)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Reserve Tank And Joint Block
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Reversible Fan
| 01***50 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 19***31 | Plate,(For Reversible Fan) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Ripper Line (1/2)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***70 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Ripper Line (2/2)
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***45 | Screw | 8 |
| 01***65 | Bolt,(Used With Pin Puller) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Rops Mount
| 01***40 | Bolt | 24 |
| 01***90 | Washer,(For Shipping) | 24 |
| 19***11 | Bracket,L.H | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Rops Mount (With Vhms)
| 01***40 | Bolt | 24 |
| 01***90 | Washer,(For Shipping) | 24 |
| 19***20 | Bracket,L.H | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Sensor And Bracket
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Sensor And Bracket (For Saudi)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Sensor And Bracket (Noise Suppression Spec.For Eu)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Sensor And Bracket (With Air Con) (Without Ripper) (For Dual Tilt Pitch Dozer) (With Vhms) (Ns)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Sensor And Bracket (With Vhms)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Under Gaurd
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Under Guard (For Cushion Dozer)
| 01***80 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
| 01***70 | Capscrew - M24 | 18 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Work Lamp And Back Up Alarm
| 01***90 | Bolt,With Cover | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Guard : Work Lamp And Back Up Alarm (With Vhms)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Hydraulic System
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Blade Lift Line (For Tilt Dozer)(#18001-18012)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***95 | Capscrew - M12 | 6 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Blade Lift Line (For Tilt Dozer)(#18013-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***95 | Capscrew - M12 | 4 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Blade Tilt Line (For Tilt Dozer)
| 01***35 | Bolt,(Not Used With Rops Canopy) | 6 |
| 01***95 | Screw | 7 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Blade Tilt Line (Main Frame) (For Dual Tilt Pitch Dozer)
| 01***35 | Bolt,(Not Used With Rops Canopy) | 3 |
| 01***95 | Screw | 14 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Blank Parts (Without Ripper)
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 1 |
| 07***15 | Nut,(For Shipping And Storage) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Hydraulic Pump
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 07***30 | O-Ring,Housing | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Hydraulic Pump Delivery Line
| 01***30 | Bolt - M8 X 30lg | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Hydraulic Pump Suction Line
| 01***40 | Capscrew | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***40 | Bolt (Op) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : P.P.C. Valve Line (Dual Tilt Pitch Dozer)
| 01***80 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***85 | Bolt,(Used With Pin Puller) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : P.P.C. Valve Line (Tilt Dozer)
| 01***80 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***85 | Bolt,(Used With Pin Puller) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Pin Puller Line (With Giant Ripper)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Pin Puller Line (With Multi Ripper)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Ripper Line
| 01***40 | Bolt (Op) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Ripper Valve And Piping (With Ripper) (1/2)
| 01***30 | Bolt - M8 X 30lg | 16 |
| 01***65 | Capscrew | 8 |
| 01***70 | Bolt - Bracket And Oil Inlet Tubemounting | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Ripper Valve And Piping (With Ripper) (2/2)
| 01***11 | Nut,(With Under Mirror) | 16 |
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
| 01***32 | Washer, (Without Emergency Steering) | 32 |
Komatsu : D375a-5(S/N 18001-Up) : Hydraulic System : Ripper Valve And Piping Less
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 7 |
Main Frame And Related Parts
Komatsu : D375a-5(S/N 18001-Up) : Main Frame And Related Parts : Equalizer Bar
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Main Frame And Related Parts : Main Frame
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
| 11***70 | Bolt | 8 |
| 19***51 | Cap | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Main Frame And Related Parts : Main Frame (For Cushion Dozer)
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
| 11***70 | Bolt | 8 |
| 19***51 | Cap | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Main Frame And Related Parts : Pivot Shaft
| 01***45 | Bolt,(For 60ton Dump Body) | 8 |
| 01***65 | Capscrew - M16 X 2.00 X 90 | 8 |
| 01***90 | Capscrew | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Main Frame And Related Parts : Pivot Shaft (For Dual Tilt Pitch Dozer)
| 01***45 | Bolt,(For 60ton Dump Body) | 8 |
| 01***90 | Capscrew | 16 |
| 01***00 | Bolt | 28 |
Marks And Plates
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks (Large Decal)
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plate (Except Japan) (R.O.P.S.)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Name,(For Chinese) | 1 |
| (****0) | Plate? Name,(For Arabic) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plate (Except Japan) (Seat Belt)
| 19***40 | Plate? Caution,(English) (For Usa? Australia) | 1 |
| 19***60 | Plate? Caution,(For Spanish) | 1 |
| 19***80 | Plate? Caution,(For German) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Arabic)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(For Arabic) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Arabic) (Without Cab)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(For Arabic) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Center Of Gravity)
| 09***01 | Mark,Location Of Center Of Gravity | 4 |
| 09***02 | Mark,Lift Point Mark | 4 |
| 09***01 | Plate? Mark,Keep A Safe Distance | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Chinese)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Chinese) (Without Cab)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (English And Portguese)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Instruction | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (English And Portguese) (For Eu Spec.)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 12 |
| 09***63 | Plate? Instruction,Air Cleaner Instruction | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (English And Portguese) (Without Cab)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Instruction | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (English)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (English) (For Eu Spec.)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 12 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (English) (Without Cab)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (French And English)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (French)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (French) (For Eu Spec.)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 12 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (German)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (German) (For Eu Spec.)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 12 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (German) (Without Cab)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner Element Mainte | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Indonesian And English)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(For Indonesia) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Indonesian)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(For Indonesia) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Italian And English) (Without Cab)
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Italian)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(For Italian) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Italian) (For Eu Spec.)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 12 |
| 09***63 | Plate? Instruction,(For Italian) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Russian)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Russian) (With Coolant Heater)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Russian) (Without Cab)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Saudi)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(For Arabic) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Spanish)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Spanish) (Character)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Spanish) (For Sauth America)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Spanish) (Noise Suppression Spec.For Eu)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 12 |
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Spanish) (Without Cab)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,(Spanish) (Not Shown) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Usa)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Marks And Plates (Usa) (Without Cab)
| 01***08 | Screw | 6 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Plate (Blade) (Eu. Spec.)(#18719-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Name,(Limited Supply) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Plate (Blade)(#18719-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Name,(Limited Supply) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Plate (Ripper) (Eu. Spec.)(#18719-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Name,(Limited Supply) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Marks And Plates : Plate (Ripper)(#18719-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| (****0) | Plate? Name,(Limited Supply) | 1 |
Miscellaneous
Komatsu : D375a-5(S/N 18001-Up) : Miscellaneous : Coolant And Oil Pan Heater (Cold Weather (A) Spec.)
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 18 |
Komatsu : D375a-5(S/N 18001-Up) : Miscellaneous : Hang Pin (For Shipping)
| 01***40 | Bolt | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 4 |
| 19***71 | Plate | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Miscellaneous : Vandalism Protection (Cold Weather (A) Spec.)
| 07***02 | Gasket,(Not Shown) (Op) | 1 |
| 07***03 | Gasket,(F4320-64a0 -32 ) | 2 |
| 07***02 | Gasket (Kit) | 1 |
Operator'S Compartment And Control System
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Additional Heater Piping Duct(#18087-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Air Conditioner Unit
| 19***40 | Unit Ass'Y | 1 |
| ND***31 | Valve | 1 |
| ND***80 | Bracket | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Arm Rest
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***75 | Capscrew | 8 |
| 01***16 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Arm Rest (With Giant Ripper)
| 01***16 | Screw | 5 |
| 01***20 | Screw | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Arm Rest (With Multi Ripper)
| 01***16 | Screw | 5 |
| 01***20 | Screw | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Arm Rest (With Multi Ripper) (With Vhms)
| 01***16 | Screw | 5 |
| 01***20 | Screw | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Arm Rest (Without Cab)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***75 | Capscrew | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Arm Rest (Without Ripper)
| 01***16 | Screw | 5 |
| 01***20 | Screw | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Arm Rest (Without Ripper) (With Vhms)
| 01***16 | Screw | 5 |
| 01***20 | Screw | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Back Mirror
| 01***45 | Bolt | 2 |
| 01***23 | Washer,(Without Air Con.) | 2 |
| 14***40 | Mirror | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade And Ripper (Ppc Switch) (For Vhms Kit)
| 07***23 | O-Ring,(Crusher?Other Att.For Ppc Con | 4 |
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 4 |
| 19***20 | Switch | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade Control (Dual Tilt Pitch Dozer)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade Control (Tilt Dozer)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade Control Lever Knob (Dual Tilt Pitch Dozer)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***10 | Screw | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade Control Lever Knob (Tilt Dozer)
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade Control Lever Knob (With Vhms)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***10 | Bolt | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade Lock Lever
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade Lock Valve Line
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***11 | Nut,(With Under Mirror) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade P.P.C Piping (Tilt Dozer)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt - M8 X 30lg | 6 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 10 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Blade P.P.C Piping (With Vhms)
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt - M8 X 30lg | 6 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 10 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Brake Control Lever
| 01***20 | Bolt,(Without Air Con. Or Heater) | 1 |
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Brake Pedal Cover
| 01***20 | Bolt,(Without Air Con. Or Heater) | 6 |
| 01***45 | Bolt, Mounting Cranking Motor | 1 |
| 01***08 | Nut,L.H. Thread | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Air Conditioner Duct)
| 01***16 | Screw | 6 |
| 01***20 | Screw | 2 |
| 01***35 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Am-Fm Radio And Cassette Stereo) (For Eu And Asia)
| 01***20 | Screw | 2 |
| 01***20 | Screw | 8 |
| 01***16 | Screw | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Body)
| 01***20 | Bolt | 4 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 4 |
| 04***22 | Bolt, Eye - Lifting | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Body) (High Strength 40psi Glass)(#18102-)
| 01***20 | Bolt | 4 |
| 01***32 | Washer,(Without Gps Antenna Bracket) | 4 |
| 04***22 | Bolt, Eye - Lifting | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Door And Lock) (1/2)
| 01***20 | Screw,(See Fig. K0210-17a0) | 10 |
| 01***16 | Screw,(With Payload Meter) | 16 |
| 01***20 | Screw | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Door And Lock) (1/2) (High Strength 40psi Glass)(#18102-)
| 01***20 | Bolt,Sems | 12 |
| 01***20 | Screw,(See Fig. K0210-17a0) | 10 |
| 01***16 | Screw,(With Payload Meter) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Door And Lock) (2/2)
| 01***16 | Screw | 16 |
| 01***20 | Bolt | 8 |
| 01***20 | Bolt | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Door And Lock) (2/2) (High Strength 40psi Glass)(#18102-)
| 01***16 | Screw | 16 |
| 01***20 | Bolt | 8 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Door Wiper)
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 14***20 | Wiper Motor Ass'Y,Wiper? L.H | 1 |
| 14***30 | Wiper Motor Ass'Y,Wiper? R.H | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Door Wiper) (High Strength 40psi Glass)(#18102-)
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 14***20 | Wiper Motor Ass'Y,Wiper? L.H | 1 |
| 14***30 | Wiper Motor Ass'Y,Wiper? R.H | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Envelope Parts)
| 01***30 | Bolt,(With Gps Antenna Bracket) | 18 |
| 01***16 | Screw | 12 |
| 01***20 | Screw | 15 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Panel Switch)
| 01***20 | Screw,(See Fig. K0210-17a0) | 2 |
| 01***20 | Screw | 2 |
| 01***16 | Screw | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Radio Less)
| 01***20 | Screw | 2 |
| 01***16 | Screw | 4 |
| 01***16 | Bolt,L.H | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Roof Lining And Garnish)
| 01***16 | Bolt | 6 |
| 01***16 | Screw | 12 |
| 01***16 | Screw | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Window Sash)
| 01***20 | Screw, Filter Mounting | 4 |
| 01***16 | Screw | 4 |
| 01***25 | Screw | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Window Sash) (High Strength 40psi Glass)(#18102-)
| 01***20 | Bolt,Sems | 40 |
| 01***20 | Screw, Filter Mounting | 4 |
| 01***25 | Screw | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Wiper)
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (Wiper) (High Strength 40psi Glass)(#18102-)
| 01***16 | Screw | 2 |
| 01***16 | Screw | 1 |
| 01***25 | Screw,R.H | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab (With Am-Fm Radio And Cassette Stereo) (For North America)
| 01***20 | Screw | 2 |
| 01***20 | Screw | 8 |
| 01***16 | Screw | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab Mount
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***75 | Bolt - Tube Mounting | 15 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Cab Mount (High Strength 40psi Glass)(#18102-)
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***75 | Bolt - Tube Mounting | 15 |
| 01***30 | Bolt,(With Gps Antenna Bracket) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Air Conditioner Bracket) (Wothout Shoe Slip Control?With Air Conditioner)
| 01***12 | Bolt - Front Cover Mounting | 3 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 10 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 30 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Heater) (With Shoe Slip Control)
| 01***12 | Bolt - Front Cover Mounting | 3 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 10 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 30 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Panel And Wiring) (Without Shoe Slip Control?With Air Conditioner) (For Heavy Harness)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Panel) (With Shoe Slip Control?With Air Conditioner)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Panel) (With Shoe Slip Control?With Air Conditioner) (For Vhms) : Unit_01_of_02
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Panel) (With Shoe Slip Control?With Air Conditioner) (For Vhms) : Unit_02_of_02
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Panel) (Wothout Shoe Slip Control?With Air Conditioner)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Panel) (Wothout Shoe Slip Control?With Air Conditioner) (For Vhms)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Wiring) (With Air Conditioer) (For Vhms)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Wiring) (Without Shoe Slip Control?With Air Conditioner)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (With Cab And Heater Def And Add Heater)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (With Large Cab? Air Con? Add Heater And Shoe Slip Control) (1/3)
| 01***12 | Bolt - Front Cover Mounting | 3 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 10 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 30 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Without Cab ) (1/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Without Cab And Shoe Slip Control) (2/2)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard (Without Cab) (With Shoe Slip Control) (1/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Dashboard Panel (For Vhms Kit)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***14 | Screw | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Decelerator Pedal
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***25 | Bolt,(Rear Attachment Less) | 1 |
| 01***30 | Bolt - M8 X 30lg | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Extinguisher
| 01***20 | Bolt,(Without Air Con. Or Heater) | 6 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 6 |
| 09***10 | Extinguisher,(Polish) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Fender Cover (For Vhms Kit)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 19***60 | Cover,R.H | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : First Aid Box
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
| 01***08 | Washer,(For Mounting First Aid Kit) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Cover (For Vhms Kit) : Unit_02_of_02
| 01***25 | Bolt - Relay Mounting | 12 |
| 17***10 | Cover | 1 |
| 17***20 | Cover | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Cover (For Vhms Kit) : Unit_01_of_02
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Cover (With Additional Heater)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***08 | Screw | 6 |
| 01***25 | Bolt - Relay Mounting | 23 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Cover (With Additional Heater) (For Vhms)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***08 | Screw | 6 |
| 01***25 | Bolt - Relay Mounting | 19 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Cover (With Cab And Orbcomm) (For Vhms)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***25 | Bolt - Relay Mounting | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Cover (With Cab)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***25 | Bolt - Relay Mounting | 20 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Cover (With Cab) (For Vhms)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 01***25 | Bolt - Relay Mounting | 20 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Cover (With Vhms)
| 01***25 | Bolt - Relay Mounting | 12 |
| 17***11 | Bracket | 1 |
| 19***60 | Cover | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Frame (With Cab)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 23 |
| 19***21 | Frame | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Frame (With Cab) (With Vhms)
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 23 |
| 19***10 | Frame | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Frame (Without Cab)
| 01***25 | Bolt | 4 |
| 07***15 | Plug,(For Rops Sweep) (Without Cab) | 19 |
| 09***14 | Cap,(Not Used For Komtrax Spec.) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Mat
| 17***12 | Mat | 1 |
| 19***40 | Mat | 1 |
| 19***50 | Mat | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Mat (With Shutter)
| 19***41 | Mat | 1 |
| 19***40 | Mat | 1 |
| 19***31 | Mat,(B) (With Shutter) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Mount (Front) (Hyper Viscous)
| 01***70 | Bolt - Accumulator Mounting Bracket | 1 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 8 |
| 01***60 | Capscrew | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Mount (Rear) (Hyper Viscous)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 8 |
| 01***60 | Capscrew | 8 |
| 01***55 | Capscrew - M24 (2) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Floor Wiring Clip (For Vhms Kit)
| 01***90 | Bolt,With Cover | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 11 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Foot Rest Cover
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 14***60 | Cap? Pedal,Pedal | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Heater Ass'Y(#18087-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 17***81 | Brush Ass'Y,(Not Shown) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Heater Unit
| 19***10 | Heater Ass'Y | 1 |
| ND***80 | Bracket | 1 |
| ND***61 | Bolt | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Lift
| 01***16 | Screw, Machine | 6 |
| 01***16 | Screw | 4 |
| 01***14 | Screw | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Lunch Box Bracket
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 17***60 | Washer | 2 |
| 19***10 | Bracket | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Lunch Box Mount
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Fabric Hight Back Seat)
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 8 |
| 01***16 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Fabric Hight Back Seat) (With Head Rest)
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 8 |
| 01***16 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Fabric Seat) (Tilt) (Air Suspension Type)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Fabric)
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 8 |
| 01***16 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Fabric) (With Head Rest)
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 8 |
| 01***16 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Leather)
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 8 |
| 01***16 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Operator'S Seat (Leather) (With Head Rest)
| 01***06 | Nut, Regular Hexagon (M8-1.25) | 4 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 8 |
| 01***16 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Operator'S Seat Stand
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Capscrew | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Pin Puller Switch Caution Plate (Cold Weather (B) Spec.)
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Ripper Control
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***20 | Bolt,Sems | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Ripper Control (For Rigit Type Ripper)
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 04***12 | Clip,See Fig. K4010-41a1 | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Ripper Control (With Shoe Slip Control) : Unit_02_of_02
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 04***12 | Clip,See Fig. K4010-41a1 | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Ripper Control (With Shoe Slip Control) : Unit_01_of_02
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***20 | Bolt,Sems | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Ripper Control (With Vhms)
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***20 | Bolt,Sems | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Ripper Control (Without Ripper) : Unit_03_of_03
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Ripper Control (Without Ripper) : Unit_01_of_03
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 14***41 | Cover,Rear Attachment Control | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Ripper Control (Without Ripper) : Unit_02_of_03
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 08***70 | Plug, Sealing | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Rops Guard
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 20 |
| 01***10 | Bolt | 12 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 20 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Rops Guard (For Vhms)
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 20 |
| 01***10 | Bolt | 12 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 20 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Rops Guard (With Beacon)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 20 |
| 01***10 | Bolt | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Rops Guard (With Beacon) (For Vhms)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 20 |
| 01***10 | Bolt | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Seat Belt (50mm)
| 02***57 | Bolt | 2 |
| 09***00 | Belt? Tether,Tether (2inch) | 2 |
| 17***02 | Belt? Lap,Lap | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Seat Belt (For Kab)
| 02***57 | Bolt | 2 |
| 09***00 | Belt? Tether,Tether (2inch) | 2 |
| 09***00 | Safety Belt Assembly | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Slider And Lift(#18001-18172)
| 01***06 | Screw | 4 |
| 01***12 | Bolt | 2 |
| 01***14 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Slider And Lift(#18173-)
| 01***35 | Bolt | 2 |
| 01***06 | Screw | 4 |
| 01***12 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Sunvisor
| 14***91 | Clip | 16 |
| 19***70 | Film | 2 |
| 19***80 | Film | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Thermos Bottle
| 19***22 | Flask,Vacuum | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Travel Control (Adjust Link)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***30 | Bolt,(With Body Positioner) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Travel Control Lever
| 01***30 | Screw | 1 |
| 01***03 | Nut, Switch Knob | 1 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Travel Control Lever (For Heavy Duty Harness)
| 01***30 | Screw | 1 |
| 01***03 | Nut, Switch Knob | 1 |
| 01***10 | Washer,Spring (For Engine Room Lamp) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Vhms (With Orbcom)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Vhms Controller Box
| 01***55 | Screw | 4 |
| 01***90 | Bolt,With Cover | 4 |
| 01***95 | Bolt | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Washer Tank
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Washer Tank (For Heavy Duty Harness)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Floor) : Unit_02_of_02
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 17***40 | Wire,(Australia Spec.) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Floor) : Unit_01_of_02
| 01***90 | Bolt,With Cover | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 16 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Floor) (For Heavy Duty Harness)
| 01***90 | Bolt,With Cover | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 15 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Floor) (With Vhms)
| 01***90 | Bolt,With Cover | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 16 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Floor)(#18001-18198)
| 01***90 | Bolt,With Cover | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 15 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Floor)(#18199-)
| 01***90 | Bolt,With Cover | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 15 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Relay Box)
| 01***12 | Bolt - Front Cover Mounting | 8 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 13 |
| 01***25 | Bolt,(Rear Attachment Less) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Relay Box) (For Heavy Duty Harness)
| 01***12 | Bolt - Front Cover Mounting | 8 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 13 |
| 01***25 | Bolt,(Rear Attachment Less) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Relay Box) (With Vhms)
| 01***12 | Bolt - Front Cover Mounting | 7 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 14 |
| 01***25 | Bolt,(Rear Attachment Less) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring (Relay Box) (Without Cab)
| 01***12 | Bolt - Front Cover Mounting | 8 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 13 |
| 01***25 | Bolt,(Rear Attachment Less) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring Clip (Relay Box) (For Vhms Kit)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 9 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 9 |
| 04***08 | Clip | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring Floor (For Vhms Kit)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Operator'S Compartment And Control System : Wiring Relay Box (For Vhms Kit)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 1 |
| 01***10 | Screw | 5 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
Power Train And Final Drive
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Brake Rod Control
| 01***11 | Nut - Mounting | 2 |
| 01***23 | Plain Washer | 2 |
| 04***28 | Pin,Cotter (Kit), Cotter Pin; Was 04050-14028 | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Final Drive (L.H.) (Case)
| 01***45 | Capscrew - M16 | 4 |
| 01***50 | Capscrew | 20 |
| 01***55 | Bolt,(Not Used For Chip Dozer) | 20 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Final Drive (L.H.) (Case) (For Saudi)
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***50 | Bolt,(For D60pl) | 20 |
| 01***55 | Bolt,(Not Used For Chip Dozer) | 20 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Final Drive (L.H.) (Gear And Carrier)
| 01***40 | Bolt (Kit) | 11 |
| 01***80 | Bolt, Axle | 30 |
| 01***95 | Capscrew - M30 (1) | 25 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Final Drive (R.H.) (Case)
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Final Drive (R.H.) (Case) (For Saudi)
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***50 | Bolt,(For D60pl) | 20 |
| 01***55 | Bolt,(Not Used For Chip Dozer) | 20 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Final Drive (R.H.) (Gear And Carrier)
| 01***40 | Bolt (Kit) | 11 |
| 01***80 | Bolt, Axle | 30 |
| 01***95 | Capscrew - M30 (1) | 25 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Final Drive (Sprocket Hub)
| 01***35 | Bolt,(Not Used With Rops Canopy) | 8 |
| 01***50 | Capscrew | 36 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 10 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Line Mount (Main Frame)
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Line Mount (Main Frame) (For Heavy Duty)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 16 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Line Wiring
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Line Wiring (For Vhms Kit)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***65 | Capscrew - M16 X 2.00 X 90 | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Line Wiring (For Vhms)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Line Wiring (With Shoe Slip Control) (For Heavy Duty Harness)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Take Off (1/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Take Off (2/2)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 3 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (1/10)? Hose
| 01***75 | Bolt - Tube Mounting | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 02***11 | Hose | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (10/10)? Power Train Mount
| 01***35 | Bolt | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 18 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (2/10)? Brake Linkage
| 01***65 | Capscrew | 2 |
| 01***30 | Bolt - M8 X 30lg | 1 |
| 01***25 | Washer,Spring?For Additional Rear Lam | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (3/10)? Tank
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (3/10)? Tank (Cold Weather (A) Spec.)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (4/10)? Gauge And Suction Line
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (5/10)? Strainer And Power Line Pump
| 01***65 | Capscrew | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (6/10)? Delivery Line And Filter
| 01***40 | Capscrew | 8 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
| 01***65 | Capscrew - M16 X 2.00 X 90 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (7/10)? Return Piping
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
| 01***65 | Bolt,(Used With Pin Puller) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (8/10)? Concentrated Piping (1/2)
| 01***45 | Bolt, Mounting Cranking Motor | 1 |
| 01***20 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (9/10)? Concentrated Piping (2/2)
| 01***60 | Capscrew | 1 |
| 01***65 | Capscrew | 1 |
| 01***75 | Capscrew | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Power Train (For Vhms Kit)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 5 |
| 01***40 | Bolt (Op) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Steering (1/8)? Case
| 01***45 | Capscrew - M16 | 12 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Steering (2/8)? Transfer And Pinion
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Steering (3/8)? Bevel Gear
| 01***45 | Hexagon Bolt | 8 |
| 01***50 | Bolt,(Not Used When With Cab) | 16 |
| 01***50 | Bolt,Reamer | 18 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Steering (4/8)? Steering Clutch And Brake (1/2)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 8 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 6 |
| 01***10 | Screw | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Steering (5/8)? Steering Clutch And Brake (2/2)
| 01***45 | Hexagon Bolt | 27 |
| 01***90 | Bolt | 22 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Steering (6/8)? Transmission And Torque Converter Shaft
| 01***40 | Bolt (Op) | 6 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 6 |
| 04***04 | Ring, Snap (2) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Steering (7/8)? Steering And Brake Piping
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 2 |
| 07***25 | O-Ring,(For Pc1800e-6)(See Fig.A3110) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Steering (8/8)? Steering Valve
| 01***95 | Bolt | 4 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***80 | Bolt,(With Corrosion Resistor) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Torque Converter (1/3)? Bare
| 01***35 | Bolt,(F4320-52a0 -5 ) | 36 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 48 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Torque Converter (2/3)? Input And Drive Case
| 01***75 | Bolt,(Without Cab) | 20 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 36 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Torque Converter (3/3)? Rear Housing And Scavenging Pump
| 01***45 | Capscrew - M16 | 20 |
| 01***50 | Capscrew | 1 |
| 01***30 | Bolt,(With Body Positioner) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Torque Converter Charging Pump
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 06***13 | Bearing,Ball | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Torque Converter Valve (1/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Torque Converter Valve (2/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Torque Converter Valve (3/3)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***10 | Bolt,(With Joy Stick Steering) | 7 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission (1/8)? Bare
| 01***45 | Hexagon Bolt | 15 |
| 01***40 | Bolt,(Tm8072-123) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission (2/8)? Housing (1/2)
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 6 |
| 13***20 | Pin,(D=15? L=162) | 6 |
| 14***60 | Pin,(D=15? L=199) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission (3/8)? Housing (2/2)
| 06***24 | Bearing,Seal | 2 |
| 14***20 | Plug | 2 |
| 15***20 | Ring,Seal? Reverse Piston | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission (4/8)? Carrier (1/2)
| 04***20 | Pin,Dowel (Welded) | 1 |
| 04***90 | Ring,Snap | 1 |
| 04***65 | Ring, Snap | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission (5/8)? Carrier (2/2)
| 04***20 | Pin,Dowel (Welded) | 1 |
| 04***25 | Ring, Retaining | 1 |
| 04***05 | Ring, Snap | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission (6/8)? Case
| 01***45 | Capscrew - M16 | 2 |
| 01***60 | Capscrew | 15 |
| 01***55 | Capscrew | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission (7/8)? Transfer
| 01***45 | Capscrew - M16 | 18 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 18 |
| 04***38 | Pin, Dowel | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission (8/8)? Input And Output
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 04***30 | Ring, Snap | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission Lubrication Valve
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 07***35 | O-Ring,Transmission Valve Mount | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission Valve (1/4)? Filter And Harness
| 01***35 | Bolt,(F4320-52a0 -5 ) | 2 |
| 01***55 | Bolt,(See Service News) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission Valve (2/4)? Upper Valve
| 01***10 | Bolt | 20 |
| 19***10 | Valve Ass'Y,Upper | 1 |
| 19***11 | Valve Ass'Y,Upper | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission Valve (3/4)? Lower Valve
| 19***20 | Valve Ass'Y,Lower | 1 |
| 19***21 | Valve Ass'Y,Lower | 1 |
| 19***22 | Valve Ass'Y,Lower | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission Valve (4/4)? Mounting
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
| 01***95 | Capscrew | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Transmission Valve Cover
| 01***30 | Bolt,(With Body Positioner) | 14 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 7 |
| 01***35 | Capscrew | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Power Train And Final Drive : Universal Joint
| 01***70 | Bolt | 8 |
| 01***80 | Screw | 8 |
| 19***40 | Universal Joint A.,(With Lock-Up) | 1 |
Sa6d170e-3a-7 S/N 310043-Up
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : After Cooler Water Piping(#310043-)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 8 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 8 |
| 01***90 | Bolt,(For Large Fan) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Air Cleaner Mounting (Water Cooling Turbocharger Spec.)(#310216-310491)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***70 | Bolt | 4 |
| 01***90 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Air Cleaner Mounting(#310043-310491)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***70 | Bolt | 4 |
| 01***90 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Air Cleaner Mounting(#310492-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***70 | Bolt | 4 |
| 01***90 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Air Heater(#310043-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 24 |
| 60***80 | Heater | 4 |
| 62***20 | Gasket,(Fig.A1310) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Air Intake Manifold(#310043-)
| 01***35 | Bolt, Cover | 42 |
| 01***95 | Bolt | 1 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 18 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Air Vent (Water Cooling Turbocharger Spec.)(#310216-)
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***35 | Bolt, Mount Bracket To Floor | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Air Vent(#310043-)
| 01***16 | Bolt - Starting Motor Ground Cable | 5 |
| 01***16 | Washer,Radio Controlled Slag Handling | 1 |
| 04***10 | Clip,(With Accumulator) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator (60a) (Heater Spec.) (Inner Parts)(#310128-)
| 60***50 | Alternator A. (60a) | 1 |
| KD***70 | Bushing,Insulate | 1 |
| KD***40 | Bushing,Insulate | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator (60a) (Inner Parts)(#310043-)
| 60***50 | Alternator A. (60a) | 1 |
| KD***70 | Bushing,Insulate | 1 |
| KD***40 | Bushing,Insulate | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator (75a) (Heater Spec.) (Inner Parts)(#310128-)
| 60***30 | Alternator A. (75a) | 1 |
| SD***X0 | Coil Assembly | 1 |
| SD***X0 | Washer | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator (75a) (Inner Parts)(#310043-)
| 60***30 | Alternator A. (75a) | 1 |
| SD***X0 | Coil Assembly | 1 |
| SD***X0 | Washer | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator (90a) (Heater Spec.) (Inner Parts)(#310266-)
| 60***20 | Alternator A. (90a) | 1 |
| KD***02 | Bolt | 4 |
| KD***02 | Washer,Spring | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator (90a) (Inner Parts)(#310266-)
| 60***20 | Alternator A. (90a) | 1 |
| KD***02 | Bolt | 4 |
| KD***02 | Washer,Spring | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator Drive(#310043-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 62***70 | Pulley | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator Mounting (60a) (Heater Spec.)(#310128-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 7 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator Mounting (60a)(#310043-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 7 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator Mounting (75a) (Heater Spec.)(#310128-)
| 01***85 | Bolt - M8 X 85lg | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator Mounting (75a)(#310043-)
| 01***85 | Bolt - M8 X 85lg | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator Mounting (90a) (Heater Spec.)(#310266-)
| 01***85 | Bolt - M8 X 85lg | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Alternator Mounting (90a)(#310266-)
| 01***85 | Bolt - M8 X 85lg | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Camfollower Cover And Breather (For D375a-5)(#310043-310088)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Camfollower Cover And Breather (For D375a-5)(#310089-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***45 | Bolt,(With Water Separator Type) | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Camshaft
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 04***28 | Key, Plain Woodruff | 1 |
| 04***12 | Ring, Snap (4) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Caution Plate (English)(#310043-)
| 09***63 | Plate? Instruction,Air Cleaner (Single Element) | 1 |
| 62***70 | Plate? Caution,Fuel Filter | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Control Valve And Mounting(#310043-310103)
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***10 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Control Valve And Mounting(#310104-310144)
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***10 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Control Valve And Mounting(#310145-)
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***10 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Cooling Fan(#310043-)
| 60***50 | Fan,Cooling | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Corrosion Resistor(#310043-)
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Crank Pulley
| 61***20 | Washer | 6 |
| 61***31 | Bolt | 6 |
| 62***70 | Pulley?Non Hardening | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Crankshaft(#310021-)
| 04***28 | Key, Plain Woodruff | 1 |
| 04***24 | Pin,Dowel (For No.3 Housing) | 1 |
| 61***50 | Thrust Bearing Assembly | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Cylinder Block
| 01***16 | Bolt, Mount Solenoid Valve | 12 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 14 |
| 04***14 | Pin, Dowel | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Cylinder Block Blind Cover(#310005-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Cylinder Block Gasket Kit(#300043-)
| 07***95 | O-Ring,Transmission Strainer | 1 |
| 07***35 | O-Ring,(F4320-68a0 -11 ) | 1 |
| 07***28 | O-Ring,(For Hd325-6?Hm400-1) (A2110) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Cylinder Block Gasket Kit(#310043-)
| 07***95 | O-Ring,Transmission Strainer | 1 |
| 07***35 | O-Ring,(F4320-68a0 -11 ) | 1 |
| 07***42 | O-Ring - Torque Converter Totransmission | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Cylinder Block Mounting (Heater Spec.)(#310128-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(With Body Positioner) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Cylinder Head
| 01***70 | Bolt | 12 |
| 04***20 | Pin,Dowel (Welded) | 2 |
| 07***38 | 0-Ring - Torque Converter Totransmission | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Cylinder Head Gasket Kit(#310043-) : Unit_01_of_02
| 07***12 | O-Ring,(F4350-59a1 -17 ) | 6 |
| 07***38 | 0-Ring - Torque Converter Totransmission | 12 |
| 07***39 | O-Ring,(Fig.A5010) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Cylinder Head Gasket Kit(#310043-) : Unit_02_of_02
| 07***12 | O-Ring,(F4350-59a1 -17 ) | 6 |
| 07***38 | 0-Ring - Torque Converter Totransmission | 12 |
| 07***39 | O-Ring,(Fig.A5010) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Damper
| 01***25 | Bolt | 12 |
| 01***16 | Washer,Radio Controlled Slag Handling | 12 |
| 04***24 | Pin,Dowel (For No.3 Housing) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Engine Mounting(#310043-)
| 01***50 | Bolt | 8 |
| 01***45 | Washer,(Without R.O.P.S.) | 8 |
| 04***34 | Pin-Dowel, Pin,Dowel (For Shipping) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Engine Name Plate (English)(#310005-)
| 04***50 | Screw | 4 |
| 09***35 | Plate? Name,(Limited Supply) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Exhaust Manifold(#310005-)
| 01***90 | Bolt | 24 |
| 61***90 | Spacer | 24 |
| 61***71 | Plug | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Exhaust Pipe(#310043-)
| 61***40 | Cap,Rain | 1 |
| 62***40 | Pipe,Exhaust | 1 |
| 62***60 | Pipe,Exhaust | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fan Belt (Reversible Spec.)(#310043-)
| 04***77 | V-Belt Set,Ec | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fan Belt(#310043-)
| 04***79 | V-Belt Set | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Flywheel Housing(#310043-)
| 01***30 | Bolt,(With Body Positioner) | 3 |
| 01***15 | Bolt | 5 |
| 01***10 | Bolt | 11 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Flywheel(#310005-)
| 61***40 | Washer | 10 |
| 62***00 | Flywheel Ass'Y | 1 |
| 62***50 | Bolt | 10 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Front Cover
| 61***20 | Seal,(Fig.A2040) | 1 |
| 61***51 | Bushing | 1 |
| 62***70 | Seal? Front,(Fig.A2040) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Front Cover Mounting (Heater Spec.)(#310128-)
| 01***65 | Bolt,(Used With Pin Puller) | 1 |
| 01***75 | Bolt - Tube Mounting | 14 |
| 09***50 | Liquid Gasket, Lg-7, 150g | 0 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Front Cover Mounting(#310043-)
| 01***65 | Bolt,(Used With Pin Puller) | 1 |
| 01***75 | Bolt - Tube Mounting | 14 |
| 09***50 | Liquid Gasket, Lg-7, 150g | 0 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Control Harness Mounting (1/3)(#310043-)
| 01***75 | Bolt - Tube Mounting | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***16 | Screw | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Control Harness Mounting (2/3)(#310043-)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 5 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Control Harness Mounting (3/3)(#310043-)
| 01***16 | Bolt - Starting Motor Ground Cable | 3 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Control Valve (High Altitude Spec.) (Inner Parts)(#310274-)
| 62***20 | Seal, O-Ring | 2 |
| 62***20 | Seal, O-Ring | 1 |
| 62***40 | Sensor, Coolant Temperature Assembly | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Control Valve (High Altitude Spec.)(#310274-)
| 01***85 | Bolt, Divider Valve Mounting | 2 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***10 | Washer,(For 35a Alternator) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Control Valve (Inner Paers)(#310043-310103)
| 62***20 | Seal, O-Ring | 2 |
| 62***20 | Seal, O-Ring | 1 |
| 62***40 | Sensor, Coolant Temperature Assembly | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Control Valve (Inner Paers)(#310104-310144)
| 62***20 | Seal, O-Ring | 2 |
| 62***20 | Seal, O-Ring | 1 |
| 62***40 | Sensor, Coolant Temperature Assembly | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Control Valve (Inner Paers)(#310145-)
| 62***20 | Seal, O-Ring | 2 |
| 62***20 | Seal, O-Ring | 1 |
| 62***40 | Sensor, Coolant Temperature Assembly | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Filter Mounting (Water Cooling Turbocharger Spec.) (High Altitude Spec.)(#310266-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***50 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Filter Mounting (Water Cooling Turbocharger Spec.)(#310216-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***50 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Filter Mounting(#310043-) : Unit_01_of_02
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***50 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Filter Mounting(#310043-) : Unit_02_of_02
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***20 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***25 | Bolt - Relay Mounting | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Injection Pump (Inner Parts)
| 62***20 | Plug, Threaded (M22-1.50) | 1 |
| 62***60 | Seal, O-Ring | 1 |
| 62***50 | Plug, Threaded (7/8-14 Unf) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Injection Pump Drive(#310001-310046)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***30 | Bolt,For Weight Adjusting Bolt | 2 |
| 04***30 | Ring, Snap | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Injection Pump Drive(#310047-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***30 | Bolt,For Weight Adjusting Bolt | 2 |
| 04***30 | Ring, Snap | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Injection Pump Mounting
| 01***15 | Bolt | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 5 |
| 01***75 | Bolt (M10-1.50x75) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Injection Pump Repair Kit
| 65***40 | Kit,Front Cover | 1 |
| 65***60 | Kit,Accessory | 1 |
| 65***70 | Kit,Gear Housing | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Injector
| 01***32 | Washer, (Without Emergency Steering) | 6 |
| 62***50 | Bolt | 6 |
| 65***10 | Injector | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Fuel Return(#310043-)
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
| 07***30 | Elbow | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Head Cover Related Parts
| 01***45 | Bolt, Bracket Mounting | 36 |
| 01***16 | Washer,Radio Controlled Slag Handling | 36 |
| 61***20 | Rubber,(Fig.A1111) | 36 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Heat Shield (For Muffler) (Water Cooling Turbocharger Spec.)(#310043-)
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Heat Shield (For Muffler)(#310043-310492)
| 01***20 | Bolt | 8 |
| 01***25 | Bolt,Joint | 14 |
| 01***30 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Heat Shield (Water Cooling Turbocharger Spec.)(#310216-)
| 01***20 | Bolt | 1 |
| 01***30 | Bolt | 11 |
| 01***35 | Capscrew | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Heat Shield(#310043-)
| 01***25 | Bolt,Joint | 2 |
| 01***30 | Bolt | 10 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Heater Switch (Without Corro.Rstr.)(#311092-)
| 01***12 | Bolt,(With Speedometer) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Heater Switch(#310043-)
| 01***12 | Bolt,(With Speedometer) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 4 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Hood (Air Intake)(#310043-)
| 61***80 | Hood Ass'Y,(Sandy And Dusty Spec.) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Idler Gear
| 01***30 | Bolt | 6 |
| 01***80 | Bolt | 2 |
| 04***24 | Pin,Dowel (For No.3 Housing) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Injection Bracket And Piping
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 1 |
| 01***45 | Bolt, Bracket Mounting | 2 |
| 01***60 | Bolt - Upper Cooler Inlet Tubemounting | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Muffler Bracket (Water Cooling Turbocharger Spec.)(#310216-)
| 01***90 | Bolt | 4 |
| 01***20 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Muffler Bracket(#310043-)
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***90 | Bolt | 4 |
| 01***20 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Muffler Drain Piping(#310043-)
| 01***35 | Bolt, Mount Bracket To Floor | 1 |
| 01***80 | Bolt (M10-1.50x80) | 1 |
| 01***08 | Nut,See Fig. K4010-04a0 | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Muffler Ejector(#310043-)
| 01***30 | Bolt | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 61***11 | Gasket,(Fig.A1610) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Muffler Piping(#310043-)
| 01***30 | Bolt | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 62***50 | Joint | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Muffler(#310043-)
| 01***85 | Bolt | 4 |
| 01***10 | Nut,(Dust?Drip Proof? Trimming S.) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Name Plate And Caution Plate (For Eu Exhaust Gas Regulation)(#310084-)
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Name Plate And Caution Plate (For Regulation Of Epa) (For Eu Exhaust Gas Regulation)(#310024-)
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Name Plate And Caution Plate (For Regulation Of Epa) (For Eu Exhaust Gas Regulation)(#310043-310090)
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Name Plate And Caution Plate (For Regulation Of Epa)(#310084-)
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Cooler
| 01***25 | Bolt - Relay Mounting | 4 |
| 07***42 | O-Ring - Torque Converter Totransmission | 2 |
| 07***12 | Plug,(For Heater-Less) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Cooler Mounting(#310043-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 24 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Filler(#310043-) : Unit_01_of_02
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 5 |
| 01***05 | Screw | 2 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Filler(#310043-) : Unit_02_of_02
| 01***50 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***75 | Bolt - Tube Mounting | 2 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Level Gauge (Heater Spec.)(#310128-)
| 01***25 | Bolt - Relay Mounting | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***06 | Nut | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Level Gauge(#310043-310119)
| 01***25 | Bolt - Relay Mounting | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***35 | Bolt, Mount Bracket To Floor | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Level Gauge(#310120-)
| 01***25 | Bolt - Relay Mounting | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
| 01***06 | Nut | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Pan And Suction Tube (Heater Spec.)(#310128-)
| 01***12 | Bolt - Front Cover Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Pan And Suction Tube(#310043-310119)
| 01***12 | Bolt - Front Cover Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Pan And Suction Tube(#310120-)
| 01***12 | Bolt - Front Cover Mounting | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Oil Pump
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***40 | Bolt (Op) | 2 |
| 01***30 | Bolt,(Water Separator Spec.) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Piston
| 02***13 | Pin, Dowel | 4 |
| 61***20 | Ring, Snap | 12 |
| 61***41 | Bearing Assembly, Standard | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Pm-Clinic (Forwarded Individualy Parts)(#310043-)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***25 | Bolt,Joint | 1 |
| 01***35 | Capscrew | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Rocker Arm And Housing
| 01***20 | Bolt (M12-1.75x120) | 60 |
| 01***15 | Nut | 1 |
| 07***12 | O-Ring,(F4350-59a1 -17 ) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Rocker Arm Housing Cover
| 62***10 | Cover, Head | 6 |
| 62***10 | Gasket,Head Cover (K1) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Safety Guard (For Alternator 60a)(#310043-)
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Safety Guard (For Alternator 75a)(#310043-)
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Safety Guard (For Alternator 90a)(#310274-)
| 01***10 | Nut,(Service Only) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 62***40 | Cover | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Spare Parts (For Exhaust Gas Secondary Regulation)(#310043-)
| 04***79 | V-Belt Set | 1 |
| 60***31 | Cartridge, Oil Filter | 2 |
| 60***10 | Separator, Fuel/Water (10 Micron) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Spare Parts (For Secondary Regulation Of Epa)(#310043-)
| 04***40 | Belt, Alternator | 1 |
| 04***75 | V-Belt Set,Reversible | 1 |
| 60***31 | Cartridge, Oil Filter | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Spare Parts(#310043-)
| 04***77 | V-Belt Set,Ec | 1 |
| 60***31 | Cartridge, Oil Filter | 2 |
| 60***40 | Filter Ass'Y | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Starting Motor (7.5kw) (Inner Parts)(#310043-310521)
| 60***51 | Starting Motor Ass'Y,(7.5kw) | 2 |
| KD***20 | Magnetic Switch Assembly | 1 |
| KD***40 | Spring,Spring | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Starting Motor Mounitng (7.5kw)(#310043-)
| 01***45 | Bolt,(For 60ton Dump Body) | 6 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***08 | Nut,See Fig. K4010-04a0 | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Tension Grease Tube(#310043-)
| 01***50 | Screw | 2 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 1 |
| 01***35 | Bolt, Mount Bracket To Floor | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Tension Pulley(#310043-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Thermostat Housing (Water Cooling Turbocharger Spec.)(#310216-)
| 01***95 | Capscrew | 4 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Thermostat Housing Blind Plug(#310043-)
| 07***15 | Plug | 1 |
| 07***16 | Plug | 1 |
| 28***70 | Plug,(For Shipping) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Thermostat Housing(#310043-)
| 01***95 | Capscrew | 4 |
| 01***00 | Bolt,(For Front Brake Release) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Turbocharger (Ktr110l-897a) (Water Cooling Spec.) (Inner Parts)(#310216-)
| 01***16 | Bolt | 4 |
| 01***16 | Bolt | 8 |
| 04***08 | Pin, Dowel | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Turbocharger (Ktr110l-987a) (Inner Parts)(#310043-)
| 01***16 | Bolt | 4 |
| 01***16 | Bolt | 8 |
| 04***08 | Pin, Dowel | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Turbocharger Mounting (Water Cooling Spec.)(#310216-)
| 61***90 | Nut, Mounting | 4 |
| 61***30 | Stud | 4 |
| 62***31 | Gasket, Turbocharger | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Turbocharger Mounting(#310043-)
| 61***90 | Nut, Mounting | 4 |
| 61***30 | Stud | 4 |
| 62***31 | Gasket, Turbocharger | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Turbocharger Oil Piping (Water Cooling Turbocharger Spec.)(#310216-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 3 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Turbocharger Oil Piping(#310043-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 3 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Turbocharger Water Piping (Water Cooling Turbocharger Spec.)(#310216-)
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***25 | Bolt,Sight | 4 |
| 01***20 | Bolt,(Forwarded Individually Parts) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Water Heater And Piping(#310120-)
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Water Heater Piping Related Parts(#310043-)
| 07***19 | Clamp, Hose | 4 |
| 61***50 | Elbow,(B) | 2 |
| 62***60 | Hose | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Water Heater Wiring (1/2)(#310120-)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Water Heater Wiring (2/2)(#310120-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***40 | Bolt (Op) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Water Line Plug (Without Corro.Rstr.)(#311092-)
| 07***12 | Gasket,(Without Air Compressor Type) (K1) | 2 |
| 07***09 | Plug,(For 2-Actuater Attachment) | 2 |
| 61***20 | Spacer,(Without Corrosion Resistor) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Water Pump (Water Cooling Turbocharger Spec.)(#310216-)
| 01***12 | Bolt - M8 - 1.25 X 12 | 1 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***15 | Bolt | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Water Pump Gasket Kit(#310043-) : Unit_02_of_02
| 07***95 | O-Ring,Transmission Strainer | 1 |
| 07***12 | O-Ring,(Fig.A5010) | 1 |
| 07***40 | O-Ring,(Fig.A5010) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Water Pump Gasket Kit(#310043-) : Unit_01_of_02
| 07***95 | O-Ring,Transmission Strainer | 1 |
| 07***12 | O-Ring,(Fig.A5010) | 1 |
| 07***40 | O-Ring,(Fig.A5010) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Water Pump(#310043-)
| 01***12 | Bolt - M8 - 1.25 X 12 | 1 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***15 | Bolt | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Wiring (1/3) (For Alternator 60a)(#310043-)
| 62***11 | Harness, Wiring | 1 |
| 62***21 | Wire Harness | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Wiring (1/3) (For Alternator 75a) (Rot Prevent Wire Harness)(#310084-)
| 62***10 | Wire Harness | 1 |
| 62***20 | Wire Harness | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Wiring (1/3) (For Alternator 75a)(#310043-)
| 62***11 | Harness, Wiring | 1 |
| 62***21 | Wire Harness | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Wiring (2/3) (For Alternator 60a)(#310043-)
| 01***10 | Bolt,(With Joy Stick Steering) | 1 |
| 01***45 | Bolt, Mount Divider Valve | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Wiring (2/3) (For Alternator 75a) (Rot Prevent Wire Harness)(#310084-)
| 01***10 | Bolt,(With Joy Stick Steering) | 1 |
| 01***45 | Bolt, Mount Divider Valve | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Wiring (2/3) (For Alternator 75a)(#310043-)
| 01***10 | Bolt,(With Joy Stick Steering) | 1 |
| 01***45 | Bolt, Mount Divider Valve | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Wiring (3/3) (For Alternator 60a)(#310043-)
| 01***16 | Bolt, Mount Solenoid Valve | 3 |
| 01***85 | Screw | 5 |
| 01***16 | Bolt - Starting Motor Ground Cable | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Wiring (3/3) (For Alternator 75a) (Rot Prevent Wire Harness)(#310084-)
| 01***16 | Bolt, Mount Solenoid Valve | 3 |
| 01***85 | Screw | 5 |
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Sa6d170e-3a-7 S/N 310043-Up : Wiring (3/3) (For Alternator 75a)(#310043-)
| 01***16 | Bolt, Mount Solenoid Valve | 3 |
| 01***85 | Screw | 5 |
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
Service Kit And Component Parts
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Blade Lift Cylinder
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***75 | Bolt (M10-1.50x75) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Blade Tilt Cylinder
| 01***55 | Capscrew | 6 |
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***95 | Bolt | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Blade Tilt Cylinder (L.H.) (For Pitch Dozer)
| 01***50 | Bolt,(Not Used When With Cab) | 6 |
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***95 | Bolt | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Blade Tilt Cylinder (R.H.) (For Pitch Dozer)
| 01***50 | Bolt,(Not Used When With Cab) | 6 |
| 01***30 | Bolt - M8 X 30lg | 8 |
| 01***00 | Bolt,L.H | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Condenser Ass'Y(#18001-18065)
| 20***30 | Clamp | 1 |
| 41***80 | Bolt,Washer | 9 |
| ND***63 | Motor Ass'Y | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Condenser Ass'Y(#18066-)
| 20***30 | Clamp | 1 |
| 41***80 | Bolt,Washer | 9 |
| ND***63 | Motor Ass'Y | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Control Valve (1-Spool) (1/2) (For Blade)
| 01***55 | Capscrew | 2 |
| 01***65 | Hexagon Bolt | 2 |
| 01***30 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Control Valve (1-Spool) (2/2) (For Blade)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***55 | Bolt,(See Service News) | 4 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Control Valve (2-Spool) (For Ripper)
| 01***75 | Bolt (M10-1.50x75) | 26 |
| 04***52 | Ball,Detent | 4 |
| 07***07 | O-Ring - (K10) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Control Valve (3-Spool) (1/2) (For Ripper Low)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 01***45 | Bolt | 6 |
| 01***25 | Screw | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Control Valve (3-Spool) (2/2) (For Ripper Low)
| 01***05 | Nut,(For Air Conditioner Less), Nut | 1 |
| 07***12 | O-Ring (Itl) | 1 |
| 07***12 | Ring,Back-Up; Was 07001-02012, Ring,Back-Up (Itl) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Ecmv Ass'Y (For Steering)
| 01***40 | Bolt | 4 |
| 08***10 | Band,Fuel Hose | 1 |
| 17***00 | Ecmv Ass'Y | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Hydraulic Pump (1/3) (Work Equipment)
| 04***42 | Pin,Dowel? Gear Case Cover | 4 |
| 04***20 | Ring, Snap | 1 |
| 70***11 | Seal,Seal | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Hydraulic Pump (2/3) (Work Equipment)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 01***45 | Washer, Spring | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Hydraulic Pump (3/3) (Work Equipment)
| 01***32 | Washer, (Without Emergency Steering) | 4 |
| 04***20 | Pin,Dowel (Welded) | 4 |
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Hydraulic Pump (Power Line)
| 01***40 | Bolt,Sems | 8 |
| 01***55 | Screw | 2 |
| 01***10 | Bolt | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Kit (Torque Converter And Transmission)
| 02***12 | O-Ring,(F2370-57a0 -49 ) | 1 |
| 07***10 | O-Ring,(F4310-54a0 -16 ) | 1 |
| 07***12 | O-Ring,(F4350-59a1 -17 ) | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Operator'S Seat (Fabric)
| 19***11 | Seat Ass'Y,Fabric | 1 |
| AS***44 | Stopper | 1 |
| AS***66 | Damper | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Operator'S Seat (Fabric) (High Back)
| 19***11 | Seat Ass'Y,Fabric Hiback | 1 |
| AS***44 | Stopper | 1 |
| AS***66 | Damper | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Operator'S Seat (Leather)
| 19***11 | Seat Ass'Y,Pvc | 1 |
| AS***44 | Stopper | 1 |
| AS***66 | Damper | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : P.P.C. Valve (For Blade) (With Tilt Dozer)
| 01***70 | Bolt | 4 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
| 07***20 | O-Ring,(0202-007) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : P.P.C. Valve (For Ripper) (With Shoe Slip Control)
| 01***20 | Bolt,(Without Air Con. Or Heater) | 4 |
| 07***20 | O-Ring,Relief Valve | 4 |
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Parking Brake Valve (For Steering)
| 01***16 | Screw | 2 |
| 07***23 | O-Ring,(F3320-66a2 -26 ) | 3 |
| 07***34 | O-Ring,(F3300-61a0 -5 ) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Pinpuller Cylinder
| 07***55 | O-Ring,(F4350-62a1 -14 ) | 1 |
| 07***60 | O-Ring,(F4350-59a0 -6 ) | 1 |
| 07***55 | Ring,Back-Up? Cylinder Head | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Prevent Steep Brake Valve (For Steering)
| 07***08 | Plug,(For Shipping) | 2 |
| 19***01 | Valve Ass'Y,Prevent Steep Brake | 1 |
| 71***50 | Plug | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Ripper Lift Cylinder(#18001-18151)
| 01***55 | Capscrew | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Ripper Lift Cylinder(#18152-)
| 01***55 | Capscrew | 6 |
| 01***95 | Bolt | 6 |
| 01***05 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Ripper Tilt Cylinder(#18001-18151)
| 01***55 | Capscrew | 6 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 4 |
| 01***60 | Bolt,(F4320-52a0 -5- ) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Ripper Tilt Cylinder(#18152-)
| 01***55 | Capscrew | 6 |
| 01***80 | Capscrew | 6 |
| 01***95 | Screw | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Rubber Antenna
| 19***10 | Rubber Antenna,(See Fig. Y1062-01a0) | 1 |
| EP***03 | Spring Washer | 2 |
| EP***01 | Wing Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Scavenging Pump
| 01***70 | Bolt | 8 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 8 |
| 04***13 | Key,Woodruff | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Shoe Bolt And Nut Service Kit
| 19***00 | Shoe Bolt And Nut K | 1 |
| 19***10 | Bolt? Shoe,Shoe (Y0320-K01 | 30 |
| 19***20 | Nut? Shoe (Y0320-K01 | 30 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Track Link (Dry Type) (Supply Parts)
| 19***22 | Track Link Ass'Y | 1 |
| 19***22 | Link,Track? L.H | 76 |
| 19***32 | Link,Track? R.H | 76 |
Komatsu : D375a-5(S/N 18001-Up) : Service Kit And Component Parts : Track Link (Lubricate Type) (With Wedge Ring) (Supply Parts)
| 07***21 | Plug,(Small) | 80 |
| 19***90 | Track Link Ass'Y | 1 |
| 19***91 | Track Link Ass'Y | 1 |
Under Carriage
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Bogie (For Full Roller Guard)
| 01***55 | Bolt, Fuel Tank Mounting | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***10 | Bolt,(For Shipping) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Bogie (L.H.) (First)
| 01***55 | Bolt, Fuel Tank Mounting | 5 |
| 01***95 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Bogie (L.H.) (First) (For Full Roller Guard)
| 01***55 | Bolt, Fuel Tank Mounting | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***10 | Bolt,(For Shipping) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Bogie (L.H.) (Second And Third)
| 01***55 | Bolt, Fuel Tank Mounting | 5 |
| 01***95 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Bogie (L.H.) (Second And Third) (For Full Roller Guard)
| 01***55 | Bolt, Fuel Tank Mounting | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***10 | Bolt,(For Shipping) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Bogie (R.H.) (First)
| 01***55 | Bolt, Fuel Tank Mounting | 5 |
| 01***95 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Bogie (R.H.) (First) (For Full Roller Guard)
| 01***55 | Bolt, Fuel Tank Mounting | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***10 | Bolt,(For Shipping) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Bogie (R.H.) (Second And Third)
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Bogie (R.H.) (Second And Third) (For Full Roller Guard)
| 01***55 | Bolt, Fuel Tank Mounting | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***10 | Bolt,(For Shipping) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Carrier Roller (L.H.)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***16 | Pin,(Dowel) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Carrier Roller (L.H.) (For Cold Weather (A) Spec.)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***16 | Pin,(Dowel) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Carrier Roller (L.H.) (For Cold Weather (A) Spec.) (Labyrinth Ring)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***16 | Pin,(Dowel) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Carrier Roller (R.H.)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***16 | Pin,(Dowel) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Carrier Roller (R.H.) (For Cold Weather (A) Spec.)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***16 | Pin,(Dowel) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Carrier Roller (R.H.) (For Cold Weather (A) Spec.) (Labyrinth Ring)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***36 | Wahser-Spring, Washer,Spring (Without Towing Winch) | 4 |
| 04***16 | Pin,(Dowel) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Cartridge Pin (L.H.)
| 01***55 | Bolt, Fuel Tank Mounting | 30 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 30 |
| 07***30 | Plug,(For W/O. Full Roller Guard) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Cartrige Pin (R.H.) (For Cold Weather (A) Spec.)
| 01***55 | Bolt, Fuel Tank Mounting | 30 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 30 |
| 07***30 | Plug,(For W/O. Full Roller Guard) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Equalizer Bar Lubrication (L.H.)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***65 | Capscrew - M16 X 2.00 X 90 | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Equalizer Bar Lubrication (L.H.) (For Dual Tilt Semi-U Spec.)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***65 | Capscrew - M16 X 2.00 X 90 | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Equalizer Bar Lubrication (R.H.)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***65 | Capscrew - M16 X 2.00 X 90 | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Front Idler (L.H.)
| 01***45 | Bolt, M14x2.0x45 | 20 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 20 |
| 01***80 | Washer,(For R.H. Steering) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Front Idler (L.H.) (For Cold Wheather (A) Spec.)
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Front Idler (R.H.)
| 01***45 | Bolt, M14x2.0x45 | 20 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 20 |
| 01***80 | Washer,(For R.H. Steering) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Front Idler (R.H.) (For Cold Wheather (A) Spec.)
| 01***45 | Bolt, M14x2.0x45 | 20 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 20 |
| 01***80 | Washer,(For R.H. Steering) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Recoil Spring (L.H.)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Recoil Spring (R.H.)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Recoil Spring Cover (L.H.)
| 01***45 | Capscrew - M16 | 12 |
| 01***40 | Bolt | 10 |
| 01***60 | Bolt,(Balancer) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Recoil Spring Cover (R.H.) : Unit_01_of_02
| 01***45 | Capscrew - M16 | 12 |
| 01***40 | Bolt | 10 |
| 01***60 | Bolt,(Balancer) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Recoil Spring Cover (R.H.) : Unit_02_of_02
| 01***45 | Capscrew - M16 | 2 |
| 01***50 | Capscrew | 3 |
| 01***45 | Bolt,(Supply Only) | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (L.H.)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (L.H.) (For Cold Weather (A) Spec.)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (L.H.) (For Cold Weather (A) Spec.) (Dtp)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (L.H.) (For Dual Tilt Semi-U Spec.)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (L.H.) (For Full Roller Guard)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (L.H.) (For Full Roller Guard) (Cold Weather (A) Spec.)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (R.H.)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (R.H.) (For Cold Weather (A) Spec.)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (R.H.) (For Cold Weather (A) Spec.) (Dtp)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (R.H.) (For Full Roller Guard) : Unit_02_of_02
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (R.H.) (For Full Roller Guard) : Unit_01_of_02
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame (R.H.) (For Full Roller Guard) (Cold Weather (A) Spec.)
| 01***65 | Bolt,(For Rear Side) | 8 |
| 01***85 | Bolt | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (L.H.) : Unit_02_of_02
| 01***45 | Capscrew - M16 | 2 |
| 01***50 | Capscrew | 3 |
| 01***45 | Bolt,(Supply Only) | 5 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (L.H.) : Unit_01_of_02
| 01***45 | Bolt,(Supply Only) | 6 |
| 01***65 | Capscrew (1) | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (L.H.) (For Full Roller Guard)
| 01***45 | Bolt,(Supply Only) | 6 |
| 01***75 | Capscrew (4) (Qty.3 (5)) | 6 |
| 01***60 | Screw | 14 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (L.H.) (For Full Roller Guard) (Cold Weather (A) Spec.)
| 01***75 | Capscrew (4) (Qty.3 (5)) | 6 |
| 01***60 | Screw | 14 |
| 01***65 | Capscrew (1) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (L.H.) (For Saudi) : Unit_02_of_02
| 01***75 | Capscrew (4) (Qty.3 (5)) | 6 |
| 01***65 | Capscrew (1) | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (L.H.) (For Saudi) : Unit_01_of_02
| 01***75 | Capscrew (4) (Qty.3 (5)) | 6 |
| 01***65 | Capscrew (1) | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (R.H.)
| 01***45 | Bolt,(Supply Only) | 6 |
| 01***65 | Capscrew (1) | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (R.H.) (For Cold Weather (A) Spec.)
| 01***45 | Bolt,(Supply Only) | 6 |
| 01***65 | Capscrew (1) | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (R.H.) (For Full Roller Guard)
| 01***45 | Bolt,(Supply Only) | 6 |
| 01***75 | Capscrew (4) (Qty.3 (5)) | 6 |
| 01***60 | Screw | 14 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Frame Guard (R.H.) (For Full Roller Guard) (Cold Weather (A) Spec.)
| 01***75 | Capscrew (4) (Qty.3 (5)) | 6 |
| 01***60 | Screw | 14 |
| 01***65 | Capscrew (1) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Doble) (R.H.) (For Cold Weather (A) Spec.) (Labyrinth Ring)
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***10 | Bolt,(For Shipping) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Double) (L.H.) (For Cold Weather (A) Spec.)
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***10 | Bolt,(For Shipping) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Double) (L.H.) (For Cold Weather (A) Spec.) (Labyrinth Ring)
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***10 | Bolt,(For Shipping) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Double) (L.H.)(#18427-)
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***10 | Bolt,(For Shipping) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Double) (R.H.)
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***10 | Bolt,(For Shipping) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Double) (R.H.) (For Cold Weather (A) Spec.)
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***10 | Bolt,(For Shipping) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Single) (L.H.) (For Cold Weather (A) Spec.) (Labyrinth Ring)
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 07***45 | O-Ring (Kit) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Single) (L.H.) (For Cold Wether (A) Spec.)
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***10 | Bolt,(For Shipping) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Single) (L.H.)(#18427-)
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***10 | Bolt,(For Shipping) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Single) (R.H.)
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***10 | Bolt,(For Shipping) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Single) (R.H.) (For Cold Weather (A) Spec.)
| 01***40 | Bolt,For Weight Adjusting Bolt | 24 |
| 01***10 | Bolt,(For Shipping) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Roller (Single) (R.H.) (For Cold Weather (A) Spec.) (Labyrinth Ring)
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
| 07***45 | O-Ring (Kit) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Shoe (610mm Wide) (Single) (With Wedge Ring) (For Heavy-Duty Type)
| 07***21 | Plug,(Small) | 80 |
| 19***72 | Track Shoe Ass'Y | 1 |
| 19***10 | Master Link K. L.H | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Shoe (Dry Type) (610mm Wide) (Single) (Heavy-Duty Type)
| 19***72 | Track Shoe Ass'Y | 1 |
| 19***10 | Shoe,Regular | 80 |
| 19***22 | Link,Track? L.H | 76 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Shoe (Lubricate Type) (610mm Wide) (Single) (Heavy-Duty Type)
| 07***21 | Plug,(Small) | 80 |
| 19***00 | Track Shoe Ass'Y | 1 |
| 19***01 | Track Shoe Ass'Y | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Shoe (Lubricate Type) (610mm Wide) (Single) (Heavy-Duty Type) (For Large Hole Type)
| 07***21 | Plug,(Small) | 80 |
| 19***30 | Track Shoe Ass'Y | 1 |
| 19***31 | Track Shoe Ass'Y | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Shoe (Lubricate Type) (710mm Wide) (Single) (Heavy-Duty Type)
| 07***21 | Plug,(Small) | 80 |
| 19***10 | Track Shoe Ass'Y | 1 |
| 19***11 | Track Shoe Ass'Y | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Under Carriage : Track Shoe (Lubricate Type) (810mm Wide) (Single) (Heavy-Duty Type)
| 07***21 | Plug,(Small) | 80 |
| 19***20 | Track Shoe Ass'Y | 1 |
| 19***21 | Track Shoe Ass'Y | 1 |
Work Equipment
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Blade Lift Cylinder
| (7***0) | Cylinder Group,R.H. (Final Coating) | 1 |
| (7***0) | Cylinder Group,L.H | 1 |
| (7***0) | Cylinder Group,R.H | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Blade Lift Cylinder (For Shipping)
| 01***35 | Bolt | 2 |
| 01***00 | Capscrew | 2 |
| 01***35 | Bolt | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Blade Tilt Cylinder (For Dual Tilt Pitch Dozer)
| (7***0) | Cylinder Ass'Y,L.H | 1 |
| (7***0) | Cylinder Ass'Y,R.H | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Blade Tilt Cylinder And Brace
| 04***60 | Ring, Snap | 1 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
| 17***70 | Seal,Dust | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Blade Tilt Piping
| 01***50 | Bolt - Differential Carrier | 20 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Blade Tilt Piping (For Dual Tilt Pitch Dozer)
| 01***50 | Bolt - Differential Carrier | 20 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Counter Weight And Drawbar
| 01***40 | Bolt | 8 |
| 01***70 | Bolt | 12 |
| 01***75 | Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Cushion Dozer Blade
| 01***35 | Capscrew - M14 (1)/(2) | 4 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 4 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 26 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Cushion Dozer Frame
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 4 |
| 01***35 | Capscrew - M14 (1)/(2) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Drawbar(#18001-18012)
| 01***40 | Bolt | 8 |
| 01***10 | Bolt, For High Lift | 6 |
| 01***75 | Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Drawbar(#18013-)
| 01***40 | Bolt | 8 |
| 01***10 | Bolt, For High Lift | 6 |
| 01***75 | Bolt | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Full-U Blade (Reinforced Type)(#18001-18628)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Full-U Blade (Reinforced Type)(#18629-)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Hydraulic Piping (Blade Tilt Line)
| 01***60 | Capscrew | 4 |
| 01***70 | Capscrew - M24 (1) | 16 |
| 01***50 | Bolt,(For Large Size Tire) | 6 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Hydraulic Piping (Blade Tilt Line) (For Dual Tilt Pitch Dozer)
| 01***60 | Capscrew | 4 |
| 01***70 | Capscrew - M24 (1) | 16 |
| 01***50 | Bolt,(For Large Size Tire) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Large Counter Weight
| 01***40 | Bolt | 8 |
| 01***24 | Nut,Leaning Lock | 6 |
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Pin Puller Cylinder And Piping (For Giant Ripper)
| 01***45 | Bolt,(With Water Separator Type) | 3 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 3 |
| 01***23 | Washer,(With Car Heater) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Arm Pin
| 01***40 | Bolt | 8 |
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
| 07***00 | Fitting, Grease - Upper Hinge Pin | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Beam And Arm (Giant Ripper) : Unit_01_of_02
| 01***40 | Bolt | 12 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Beam And Arm (Giant Ripper) : Unit_02_of_02
| 01***40 | Bolt | 12 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Beam And Arm (Giant Ripper) (For Heavy Duty Shank )
| 01***40 | Bolt | 12 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Beam And Arm (Giant Ripper) (For Long Shank)
| 01***40 | Bolt | 12 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***60 | Flat Washer - M20 (Hardened) | 12 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Beam And Arm (Multi Ripper)
| 01***40 | Bolt | 12 |
| 01***60 | Flat Washer - M20 (Hardened) | 12 |
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Cylinder Piping (For Rigid Type)
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 8 |
| 07***75 | Fitting,Grease (Without Lub. Piping) | 2 |
| 07***00 | Fitting, Grease (Steering Cylinder) | 2 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Cylinder Piping (For Variable Type)
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 8 |
| 07***10 | Hose | 4 |
| (1***3) | Cylinder Group,Ripper Lift? R.H | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Point (For Giant Ripper With Heavy Duty Shank)
| 19***50 | Point,(For Multi Heavy Duty Ripper) | 1 |
| 19***70 | Point,Short?(Yellow) (Giant) | 1 |
| 19***80 | Point,Short? Heavy-Duty (Giant) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Point (For Giant Ripper)
| 19***20 | Point,Short?(Yellow) (Giant) | 1 |
| 19***30 | Point,Short?(Red) (Giant) | 1 |
| 19***40 | Point,Long?(Yellow) (Giant) | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Point (For Multi Ripper)
| 19***20 | Point,Short?(Yellow) (Giant) | 3 |
| 19***30 | Point,Short?(Red) (Giant) | 3 |
| 19***40 | Point,Long?(Yellow) (Giant) | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Point Light
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Point Light (For Heavy Duty Harness)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Ripper Tilt Cylinder
| (1***3) | Cylinder Ass'Y | 1 |
| (1***2) | Cylinder Ass'Y,R.H | 1 |
| (1***2) | Cylinder Ass'Y,L.H | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Spil Guard (Full-U Blade)
| 19***11 | Spill Guard | 1 |
| 19***21 | Spill Guard | 1 |
| 19***31 | Spill Guard | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Spill Guard (Semi-U Blade)
| 19***11 | Spill Guard (Welded) | 1 |
| 19***21 | Spill Guard | 1 |
| 19***31 | Spill Guard | 1 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Straight Tilt Frame
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***75 | Capscrew - M24 | 20 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Straight Tilt Frame (Reinforced Type)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***75 | Capscrew - M24 | 20 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Blade (Coal)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Full-U Blade(#18001-18628)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Full-U Blade(#18629-)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Semi-U Blade (Reinforced Type) (With Pusher Plate)(#18001-18628)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Semi-U Blade (Reinforced Type) (With Pusher Plate)(#18629-)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Semi-U Blade (Reinforced Type)(#18001-18628)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Semi-U Blade (Reinforced Type)(#18629-)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Semi-U Blade (With Pusher Plate)(#18001-18628)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Semi-U Blade (With Pusher Plate)(#18629-)
| 01***45 | Bolt,(Supply Only) | 8 |
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***70 | Capscrew - M24 | 8 |
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Semi-U Blade(#18001-18628)
Komatsu : D375a-5(S/N 18001-Up) : Work Equipment : Tilt Semi-U Blade(#18629-)
| 01***50 | Bolt - Differential Carrier | 4 |
| 01***45 | Bolt,L.H | 8 |
| 01***70 | Capscrew - M24 | 8 |
D375A-5(S/N 18001-UP) serial number reference
On the D375A-5 (18001-UP), the identification plate is a riveted nameplate normally mounted in the operator's cab near/behind the seat, with the machine (chassis) serial number also stamped into the mainframe structure and sometimes covered by a Komatsu decal. Read it as the model code 'D375A-5' followed by a plain numeric machine number (e.g., 18001, 18052, 18200...); this mid-2000s generation predates Komatsu's later 17-character alphanumeric PIN format (which starts with a plant code such as 'KMT'), so there is no 3-character alpha prefix on these units - the numeric serial itself is the identifier, and its value indicates which parts/shop-manual running-change break the unit falls under. The engine model plate/tag (SA6D170E-3 for the confirmed 18001-UP and 18052-UP breaks) should be cross-checked separately from the chassis serial, since at least one later shop-manual listing (18200-UP) shows an inconsistent engine designation that could not be independently confirmed.
| Prefix | Identifies | Notes |
|---|---|---|
| 18001-UP | D375A-5 base production family (opening serial block) | Opening serial block for the D375A-5 (S/N 18001-UP) crawler dozer, covered by shop manual SEBM023508 (printed Japan, April 2005). D375A-5 mounts the SA6D170E-3 engine (turbocharged, air-to-air aftercooled, cooled EGR, 6-cylinder, 170x170 mm bore/stroke, ~23.15 L displacement, gross ~452 kW/605-606 HP, net ~391 kW/525 HP at 1800 rpm). Steering: wet multi-disc steering-clutch-and-brake type with PCCS (Palm Command Control System) electronic lever control, not hydrostatic (HSS). Operating weight varies by configuration/attachments, roughly 67-69.6 t (147,680-153,350 lb). Standard track shoe: 610 mm (24 in); no distinct factory LGP (low-ground-pressure) designation in Komatsu literature — Komatsu's LGP naming applies to other model lines (e.g. PX-suffix dozers), so treat any wide-shoe option as standard equipment. Production window: 2004-2009, superseded by D375A-6 starting 2010. |
| 18052-UP | D375A-5, VHMS-specification running change (within 18001-UP family) | Running-change breakpoint within the same 18001-UP serial family, for machines built to VHMS (Vehicle Health Monitoring System) specification; documented in shop manual SEBM036103 (printed Japan, 2005). D375A-5 mounts the SA6D170E-3 engine — same engine as 18001-UP opening block, so this is a spec/equipment breakpoint, not an engine or model change. Treat the exact cutoff as a documented parts/service break rather than a distinct configuration. |
| 18200-UP | D375A-5, further running change within 18001-UP family (engine designation unresolved - confirm with dealer) | A later documented serial breakpoint, covered by shop manual SEBM035200, confirmed present across independent manual-reseller sources with consistent wording. However, the source text for this specific breakpoint states "D375A-5 mounts the SA6D170E-2 engine" - and SA6D170E-2 was independently verified as the engine used in the predecessor D375A-3 (S/N 17001-UP) family, not the SA6D170E-3/EGR engine confirmed for the 18001-UP and 18052-UP blocks of this same model. Since it would be atypical for a later serial number to revert to an older, non-EGR engine designation, this is most likely a publisher/listing error rather than a genuine mid-run engine change; it does not necessarily indicate model contamination since the source explicitly names D375A-5 and serial 18200, but the engine claim should not be relied on. Do not use this breakpoint to identify engine type - confirm the actual engine fitted via dealer VIN/serial lookup. |
Frequently asked questions
What engine powers the Komatsu D375A-5 (S/N 18001-UP)?
A 6-cylinder, turbocharged and aftercooled Komatsu 170-series diesel, referenced across sources under both the SA6D170E-3 and SAA6D170E-5 designations, rated net 391 kW / 525 HP (gross about 452 kW / 606 HP) at 1,800 rpm and built to meet EPA Tier 3 / EU Stage IIIA emissions with cooled EGR.
What is the operating weight of the Komatsu D375A-5 (S/N 18001-UP)?
Published figures range from roughly 66,985 kg to 69,600 kg (about 147,680-153,440 lb); the exact figure varies by blade type, ripper fitment, and undercarriage/track-shoe configuration.
What replaced the Komatsu D375A-5?
Komatsu superseded it with the D375A-6 (higher-output version of the same 170-series engine family, from around 2010) and later the Tier 4 Final D375A-8, which added diesel particulate filtration and further electronic controls.
What D375A-5(S/N 18001-UP) owners discuss
What engine does the D375A-5 (S/N 18001-UP) actually use, and what quirks do owners report with it?
Manufacturer documentation and parts references for this serial range identify the SAA6D170E-5 as the engine fitted to the D375A-5 (S/N 18001-UP) - a turbocharged, air-to-air aftercooled inline-six with cooled EGR, built to meet EPA Tier III / EU Stage IIIA emissions. Quoted power varies by source depending on whether a gross or net (flywheel) rating is being cited: figures range from roughly 391-397 kW (525-533 hp) net up to about 452 kW (606 hp) gross at 1,800 rpm - treat this as a gross/net split rather than a real disagreement, and confirm against the specific machine's nameplate/series. Because this generation carries EGR (a later 55001-up production block was offered without EGR, which underlines that the 18001-up range does have it), the quirk techs and owners flag most is EGR cooler fouling and soot buildup - symptoms include white or blue exhaust smoke, sluggish response under load, and rising coolant temperature if the cooler restricts flow. Long-term owner reports split along maintenance lines: one heavily worked, poorly maintained unit was described as smoky and oil-hungry with squeaks and leaks throughout, while a comparable machine kept on scheduled fluid and filter changes reportedly ran many years with the engine internals in good condition. Any suspected coolant-into-oil or EGR cross-contamination should have your dealer verify before the machine returns to service.
How does the powertrain (torque converter, transmission, steering clutches) behave, and what goes wrong with it?
This machine uses a torque-converter-driven powershift transmission paired with electronically modulated, spring-applied/hydraulically-released multiple-disc steering clutches and brakes, coordinated by the machine's power-train electronic control system reading joystick/pedal input and machine-condition sensors. Community and dealer-level consensus is that the mechanical clutch packs are durable when serviced on schedule, but the system is sensitive to control and wiring health - documented fault conditions include steering potentiometer disconnection or short-circuit codes and transmission clutch "abnormal function/slip" codes, both of which more often trace back to connector or harness condition than a worn clutch pack itself. The recommended approach before condemning a clutch pack is to cross-reference the monitor panel fault code against the shop manual and check wiring first. Steering clutch/brake response is directly tied to control on grade, so have your dealer verify clutch and brake modulation, along with related control-system wiring, before relying on the machine on slopes.
What do operators say about the hydraulic system and blade control response?
Hydraulics run on a closed-center load-sensing system (CLSS) feeding a variable-displacement piston pump, with implement flow commonly cited in the neighborhood of 366 L/min (about 96.7 US gal/min) at rated engine speed - this figure can vary by source and configuration. General community discussion around large Komatsu dozer hydraulics converges on ordinary wear items rather than design faults: hose and seal leaks that accumulate with age, and hydraulic response that becomes sluggish or erratic if fluid level and filtration are neglected. Because blade functions are commanded through PPC (proportional pressure control) joysticks, several references point to PPC valve output pressure and mechanical play/adjustment as the first thing to check when blade response feels soft or uneven rather than assuming a pump or cylinder fault. If blade control feels inconsistent, have your dealer verify PPC valve pressures and main relief settings, since a marginal PPC circuit can behave unpredictably under load.
What undercarriage wear pattern is typical for this machine, and what should owners watch for?
This dozer uses Komatsu's K-Bogie undercarriage: lubricated, sealed track rollers resiliently mounted to the track frame through a bogie (oscillating) suspension cushioned by rubber pads, combined with bolt-on sprocket segments that can be replaced individually in the field rather than swapping a full sprocket rim. Community and dealer-adjacent sources agree undercarriage is the dominant wear and cost item on a machine this size - figures cited for tracked machines generally place undercarriage in the range of 45-65% of total maintenance cost, varies by source and duty cycle. The specific point mechanics call out on the segmented sprocket design is retaining-bolt torque: if segment hardware isn't kept properly torqued, teeth can loosen and shift under load, which accelerates wear and creates a dropped-hardware hazard on the ground. Have your dealer verify sprocket segment bolt torque and check for developing looseness on any used machine, since a segment working loose is both a driveline reliability issue and a site safety hazard.
What electrical and sensor issues come up most often on machines of this era?
Rather than one specific defect, forums and diagnostic references converge on a handful of recurring electrical themes on Komatsu dozers of this generation: monitor panel or engine controller power faults traced to wiring harness condition, pressure-sensor circuit faults (front/rear pump pressure sensors and their shared power supply) surfacing as abnormal-circuit codes, and general complaints of inaccurate sensor readings traced to dust, oil, or moisture intrusion at connectors rather than a failed sensor element. The consistent advice from experienced techs is to check grounds and connector condition before swapping sensors or controllers, since deteriorated harnesses and corrosion account for the majority of intermittent codes on machines with significant hours. Intermittent steering- or brake-related sensor faults should have your dealer verify the wiring and control system before the machine goes back into production use.
Why does this machine run hot in mining/quarry service, and is it a design problem?
Because this class of dozer is frequently run in mining or quarry dust, owners and techs consistently point to the radiator core packing with dust, mud, and oil residue as the top cause of elevated operating temperature, well ahead of any component defect. Cleaning frequency mentioned by sources ranges from daily to weekly depending on how dusty the site is, so this varies by operating environment rather than being a fixed interval. A worn fan clutch or fan drive is the secondary cause cited when temperatures creep even after the core has been cleaned. This is generally maintenance-driven rather than a factory design flaw, but temperatures that stay high after a proper cleaning warrant a real coolant-flow and cap-pressure check. If overheating persists after cleaning, have your dealer verify cooling system integrity (fan drive, hoses, cap pressure), since sustained overheating risks head gasket or EGR cooler damage.
What should a buyer check before purchasing a used D375A-5 (S/N 18001-UP)?
First, confirm the serial number actually falls in the 18001-and-up EGR-equipped production range and is not the later 55001-up W/O EGR block, which is a different engine calibration and parts family - mixing these up leads to the wrong service and parts assumptions. Pull maintenance records and verify fluid and filter change intervals were kept, since owner reports consistently tie long engine life to on-schedule oil and filter service. Inspect the EGR cooler/intake area for soot buildup and watch for white or blue smoke at cold start and under load. Cycle the steering clutches, brakes, and blade PPC controls, checking for lag, softness, or uneven response. Check the undercarriage closely - track and roller seal condition, bogie rubber pad condition, and sprocket segment bolt torque or looseness - since undercarriage wear dominates ownership cost on a machine this size. Check the radiator core for dust/mud packing and fan clutch condition, especially if the machine came from mining or quarry service. Finally, run the monitor panel's self-check for stored pressure-sensor or steering-potentiometer fault codes even if nothing is currently active, since stored codes usually point to harness or connector deterioration worth negotiating on. Have your dealer verify steering clutch/brake function, undercarriage hardware torque, and any stored fault codes before purchase, since these are the areas most tied to operator safety and to costly surprise repairs.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Komatsu D375A-5(S/N 18001-UP). Related factory variants of the same model family:
D375A_5(S/N 55001-UP (W/O EGR))
Need a specific D375A-5(S/N 18001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.