Komatsuother(no series)
Komatsu CS360-2(S/N 11001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu CS360-2 (S/N 11001-UP) is a self-propelled crawler road and soil stabilizer, a rotary mixer that pulverizes old pavement and blends it with a stabilizing agent in a single pass. It runs on Komatsu's SA6D140E-3-A turbocharged diesel from the SA6D140 engine family, rated at roughly 265 kW (355 hp, about 360 PS), driving an offset rotor that mixes to a maximum depth of about 0.7 m (700 mm) at a working width in the 2.0 to 2.2 m range, varying by configuration. Exact operating weight for this serial range is not published in available factory literature; large crawler stabilizers in this power class typically sit in the low-to-mid 20 tonne range. The dash-2 series (S/N 11001-UP) sits alongside a deeper-cutting CS360SD-2A sibling built for clay-heavy subgrades down to 1.2 m (3'11"), and a wheeled GS360-2 counterpart aimed at lighter, more mobile stabilization work on the same rotor and drivetrain philosophy.
The dash-2 generation carried the SA6D140-family engine forward while refining the rotor's hydraulic lift and tilt control, adding independent left-right lift so the rotor holds a steady cutting depth on rough or uneven pavement, plus a tandem drive-wheel layout that keeps traction and rotor depth consistent. The deeper-cutting CS360SD-2A variant added a secondary crushing stage for tougher clay soils, and Komatsu later carried the crawler stabilizer concept forward into further generations. In the used and parts market, this generation matters because these are long-lived infrastructure machines: rotor picks, mixing-chamber liners, and undercarriage components wear steadily and drive recurring parts demand, while engine and hydraulic-pump commonality across the CS360-2, GS360-2, and related Komatsu stabilizer models widens the pool of interchangeable parts for a machine type with a relatively small worldwide population.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu CS360-2(S/N 11001-UP) specifications
Engine
| Engine model (base CS360-2) | Two factory engine options across this production run, per the OEM parts catalog: SA6D140E-3G-7 and S6D140-1G, both 6-cylinder, water-cooled diesels in the Komatsu SA6D140/S6D140 family also used on the wheeled GS360-2 stabilizer sibling |
| Rated output | About 265 kW (roughly 360 metric PS / 355 gross HP) at 2,000 rpm for the SA6D140-family engine used on this stabilizer line; treat as representative for the base CS360-2 sharing the same engine, confirm the exact figure for this serial range with your dealer |
| Cylinders / configuration | 6-cylinder, water-cooled diesel (SA6D140 family) |
| Displacement | not documented for this exact serial range in sources reviewed — verify with your dealer |
| Emissions tier | not documented for this exact serial range (pre-emissions-tier era machine, mechanically governed diesel) — verify with your dealer |
Weights
| Operating weight, base CS360-2 (700 mm mixing depth) | not confirmed in sources reviewed for the base configuration specifically |
| Operating weight, CS360SD-2A deep-mix sibling (for reference only) | about 23,000-24,700 kg depending on source and sub-variant — not a confirmed base-model figure |
| Ground pressure | not confirmed for base CS360-2; the CS360SD-2A sibling is documented at 36.3 kPa |
Dimensions
| Overall length, width, height (base CS360-2) | not confirmed for the base configuration in sources reviewed |
| Overall length/width/height, CS360SD-2A sibling (for reference only) | about 8.84-9.49 m long x 2.98 m wide x 3.15-3.64 m high depending on source — approximate, not a confirmed base-model figure |
| Shoe (track) width, CS360SD-2A sibling | about 860 mm |
| Minimum ground clearance, CS360SD-2A sibling | about 550 mm |
| Rotor offset (base CS360-2) | about 170 mm beyond the outer edge of the left track |
| Rotor shift travel | about 500 mm to each side per marketing literature; the CS360SD-2A spec table lists 650 mm — figures differ by source/variant |
Performance
| Working (mixing) speed | about 10 m/min, documented on the CS360SD-2A table and consistent with the base machine's road-mixing duty cycle |
| Transport (travel) speed | about 3.1-3.2 km/h for this stabilizer line |
| Maximum drawbar pull, CS360SD-2A sibling (for reference only) | about 118 kN |
| Gradeability | about 20 degrees, documented for this stabilizer line |
| Mixing/working width | 2.0 m for the base CS360-2 |
| Maximum mixing/working depth, base CS360-2 | 700 mm (2'4") |
| Maximum mixing/working depth, CS360SD-2A deep-mix sibling (for reference only) | 1.2 m (about 47") for the CS360SD-2A deep-mix sibling, a separate model designation |
| Rotor bit count, CS360SD-2A sibling | 48 bits (not confirmed for base CS360-2) |
Service capacities (summary)
| Fuel tank, CS360SD-2A sibling (for reference only) | about 500 L — not separately confirmed for the base CS360-2 |
| Hydraulic system, CS360SD-2A sibling (for reference only) | about 300 L — not separately confirmed for the base CS360-2 |
| Engine oil | not documented for this exact serial range in sources reviewed — verify with your dealer |
| Cooling system | not documented for this exact serial range in sources reviewed — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CS360-2(S/N 11001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not documented for this exact serial range — verify with your dealer | Komatsu genuine diesel engine oil (EO), viscosity grade selected by ambient temperature per the Komatsu engine oil chart — typically EO10W-30 or EO15W-40 in warm climates, EO0W-30/EOS0W-30 in cold climates |
| Cooling system | Not documented for this exact serial range — verify with your dealer | Komatsu Supercoolant AF-NAC, ethylene-glycol based, factory 50/50 premix, all-season/all-climate use |
| Fuel tank | Not documented for this exact serial range — verify with your dealer | Diesel fuel meeting the engine's emissions-tier requirement (ULSD where required); no viscosity/climate split published for this range |
| Hydraulic system (tank and circuit) | Not documented for this exact serial range — verify with your dealer | Komatsu genuine hydraulic oil (HO series, ISO VG46 class), grade selected by ambient temperature per the Komatsu hydraulic oil chart — heavier grade in hot climates, lighter grade in cold climates |
| Final drive, each side | Not documented for this exact serial range — verify with your dealer | Komatsu genuine powertrain/gear oil (TO series), viscosity by ambient temperature per the Komatsu final-drive oil chart |
| Grease (chassis, pins, bushings) | Spec only — no fill volume published | Komatsu Lithium EP grease G2-LI (or molybdenum-disulfide grade where specified for pin joints), suited for heavy-equipment bearing and pin service across a wide temperature range |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu CS360-2(S/N 11001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the CS360-2(S/N 11001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
The SA6D140E-3-A engine and rotor-drive hydraulics carry the heaviest duty cycle on this stabilizer. Run scheduled oil sampling on engine oil, hydraulic oil, and rotor gearbox oil to catch abrasive contamination from pavement fines before it scores pump and cylinder bores. Track hydraulic filter differential pressure, since the rotor-lift and tilt circuits see constant shock loading. Log coolant condition and rotor pick wear trends between services to plan parts orders ahead of failure.
Corrective & Common Repairs
Expect recurring wear on the tapered rotor picks and mixing-chamber liners from direct pavement and aggregate contact; hammer-fit replacement bits keep changeouts fast. Hydraulic cylinder seals on the rotor lift and tilt circuits fail from cyclic shock loading and need periodic reseal. Crawler track shoes, rollers, and idlers wear quickly from constant reversing over broken pavement. Spray-bar nozzles on the water and binder system clog with fines and need regular clearing to keep the mix consistent.
Overhaul & Rebuild Points
At major hour counts, plan a rotor shaft and bearing overhaul along with a gearbox rebuild, since the offset rotor design puts constant radial load on these components. The SA6D140E-3-A benefits from a top-end evaluation of turbocharger, injectors, and valve train once oil analysis trends turn negative. Undercarriage rebuild (track chain, sprockets, idlers, rollers) is common given the abrasive, stop-start duty cycle. Budget for hydraulic pump and rotor-lift cylinder reconditioning at the same milestone.
Seasonal & Environment Servicing
Cold climates call for coolant concentration checks, an engine block heater, and a winter-grade hydraulic oil viscosity change before the rotor-lift circuit slows in low temperatures. High-dust or crushed-aggregate jobsites demand more frequent air filter and rotor housing seal inspections. Wet clay conditions pack the mixing chamber fast; add mid-shift cleanout checks to prevent binding. Before extended idle storage, clean the rotor and chamber, retract cylinders, and protect exposed crawler track pins from corrosion.
CS360-2(S/N 11001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 07281-00197 | Clamp,(With Pre-Fuel Filter) | Fuel system service | Check fitment → |
| ND092220-0040 | Filter,Fuel | Fuel system service | Check fitment → |
| 600-185-6100 | Element Assembly, Air Cleaner | Air intake service | Check fitment → |
| 7861-93-1420 | Sensor,Air Filter Clogging | Air intake service | Check fitment → |
| 600-211-1230 | Cartridge,Oil Filter | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CS360-2(S/N 11001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine oil pressure warning lamp | Engine oil pressure below the safe threshold | Low oil level, worn oil pump, clogged oil filter, or failed oil pressure switch | Stop engine immediately, check oil level and filter condition before restart |
| Coolant temperature warning lamp | Engine coolant temperature above normal operating range | Low coolant level, clogged radiator core, slipping or broken fan belt, or thermostat failure | Idle down and stop engine safely, let it cool, then check coolant level and radiator fins |
| Charge (alternator) warning lamp | Charging circuit not producing normal output | Broken or slipping alternator belt, failed alternator, or loose/corroded battery connections | Check belt tension and battery terminals, test alternator output |
| Air cleaner restriction indicator | Intake air filter element is clogged | Dust and debris loading from stabilizer/reclaiming work in dusty conditions | Clean or replace the air filter element and reset the indicator |
| Fuel filter / water separator indicator | Fuel filter restriction or water accumulation in the fuel system | Contaminated fuel, water ingress, or filter service interval exceeded | Drain the water separator and replace the fuel filter element |
| Hydraulic oil temperature warning lamp | Hydraulic system oil temperature above normal range | Low hydraulic oil level, clogged oil cooler, or sustained heavy rotor-drive load | Reduce load, check oil level and cooler for blockage, let system cool before continuing |
| E02 | Pump control (PC-EPC) circuit fault on the hydraulic pump controller | Faulty pump control sensor, damaged wiring/connector, or controller fault on the shared pump-control architecture used across this engine/chassis generation | Inspect pump control sensor wiring and connectors, then check with dealer diagnostic tool |
| E03 | Parking/travel brake circuit fault | Faulty brake solenoid, pressure switch, or associated wiring on the travel brake circuit | Inspect brake solenoid and pressure switch wiring, verify brake release pressure |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CS360-2(S/N 11001-UP) attachments & work tools
Mixing/cutting rotor (primary work tool)
The CS360-2 is a single-purpose crawler stabilizer, not an excavator/loader with swappable buckets. Its work tool is a fixed up-cut mixing rotor mounted centrally between the tandem drive tracks, used to crumble old pavement and blend in a stabilizing agent (for example lime) in one pass, then leave the crushed material as subbase for new pavement.
Working depth / rotor configuration
Standard CS360 configuration mixes to about 0.7 m (2'4") depth. A special deep (SD) rotor/chamber configuration on the same size class reaches about 1.2 m (3'11") for deeper soil-improvement work; treat SD as a distinct machine configuration, not a bolt-on kit, and verify which chamber this S/N range carries with your dealer.
Rotor offset / side-shift mechanism
The rotor can be hydraulically offset beyond the outer edge of the left track for edge-of-pavement or shoulder work. Reported offset for this size class is roughly 170 mm (6.7") beyond the track edge; smaller/deep-chamber siblings in the CS line show a shorter offset near 140 mm (5.5"), so treat the exact figure as varying by configuration.
Rotor cutting bits / teeth (wear tools)
The mixing rotor carries a full set of tungsten-carbide-tipped cutting bits in bolt-in or pin-retained bit holders around the drum. These are wear items replaced individually as they dull from milling asphalt, concrete, or stabilized soil; no quick-coupler is used, they are serviced directly on the rotor body.
Undercarriage / crawler shoe options
Crawler track shoes are offered in swamp-pad (wide, low ground-pressure) form for soft or saturated subgrade, versus standard grouser shoes for firmer surfaces. Shoe choice is matched to jobsite soil conditions to keep the rotor at a constant cutting/mixing depth.
Coupler / mounting system
There is no excavator- or loader-style quick-coupler on this machine. The mixing rotor and its housing are integral to the chassis; the machine is not designed to swap between multiple bucket or tool types the way a excavator or wheel loader is.
Binder/agent distribution
Sources describe the stabilizer mixing a stabilizing agent into the crushed material simultaneously with milling, but a spray-bar, slurry tank, or lime-spreader attachment specific to this serial range is not documented in available factory literature — verify with your dealer whether binder delivery is on-machine or via a separate spreader unit run ahead of the stabilizer.
Guarding
As with other milling/mixing rotor machines, the rotor chamber is enclosed by a hood/skirt to contain thrown debris and dust during operation; specific guard part options for this exact serial range are not documented in available sources.
All CS360-2(S/N 11001-UP) assemblies by section
Every catalogued assembly group for the Komatsu CS360-2(S/N 11001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Control System And Frame
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Frame(#11001-11002)
| 01***55 | Bolt,(With Hook) | 24 |
| 01***60 | Flat Washer - M20 (Hardened) | 24 |
| 26***00 | Frame | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Frame(#11003-11062)
| 01***55 | Bolt,(With Hook) | 24 |
| 01***60 | Flat Washer - M20 (Hardened) | 24 |
| 26***01 | Frame | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Frame(#11063-)
| 01***55 | Bolt,(With Hook) | 24 |
| 01***55 | Bolt,(Without Rops) | 24 |
| 01***60 | Flat Washer - M20 (Hardened) | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Fuel Control Lever(#11001-11086)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Fuel Control Lever(#11087-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Fuel Control Linkage(#11001-11086)
| 01***25 | Bolt,Without Revolution Sensor | 1 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Fuel Control Linkage(#11087-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Rotor Control Lever
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Rotor Control Linkage
| 01***30 | Bolt | 2 |
| 01***30 | Screw | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Lever (Tbg Spec.)(#11062-11062)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Lever (Tbg Spec.)(#11063-)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Lever (With Air Conditioner)(#11003-11086)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Lever (With Air Conditioner)(#11087-)
| 01***22 | Screw | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Lever(#11001-11086)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 4 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Lever(#11087-)
| 01***22 | Screw | 4 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Linkage (1/2)
| 01***06 | Nut,L.H. Thread (For Russian) | 2 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 6 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Linkage (1/2) (Tbg Spec.)(#11062-)
| 01***06 | Nut,L.H. Thread (For Russian) | 2 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 6 |
| 01***08 | Nut,(For Straight Tilt Dozer) (D65p) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Linkage (2/2)
| 01***03 | Nut; Was 01508-20603, Nut? L.H. Thread,L.H. Thread | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Travel Control Linkage (2/2) (Tbg Spec.)(#11062-)
| 01***03 | Nut; Was 01508-20603, Nut? L.H. Thread,L.H. Thread | 2 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Work Equipment Control Lever
| 01***30 | Bolt,(Not Used When Towing Winch) | 3 |
| 01***16 | Screw | 2 |
| 01***05 | Nut,L.H. Thread (D31s) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Control System And Frame : Work Equipment Control Lever (Tbg Spec.)(#11062-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 3 |
| 01***16 | Screw | 2 |
Engine Related Parts And Electrical System
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Air Cleaner(#11001-11086)
| 56***01 | Air Cleaner Ass'Y | 1 |
| 56***11 | Body | 1 |
| 56***20 | Element,Inner | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Air Conditioner Related Parts (Tbg Spec.)(#11062-)
| 01***25 | Bolt,Without Revolution Sensor | 3 |
| 01***30 | Bolt,(For Mechanical Governor) | 3 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Air Intake(#11087-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 07***69 | Clamp | 4 |
| 12***40 | Washer,(Without Canopy) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Battery(#11001-11062)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***20 | Bolt? Wing,Wing | 4 |
| 01***12 | Washer,(With Body Positioner) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Battery(#11063-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***20 | Bolt? Wing,Wing | 4 |
| 01***12 | Washer,(With Body Positioner) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Air Conditioner Line)(#11003-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 3 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Battery Line)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
| 08***65 | Cable | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Battery Line) (Tbg Spec.)(#11062-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
| 08***65 | Cable | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Center) (Tbg Spec.)(#11062-)
| 01***10 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Screw - Turn Signal And Parkinglight Mounting | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Center)(#11001-11001)
| 01***10 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Screw - Turn Signal And Parkinglight Mounting | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Center)(#11002-11086)
| 01***10 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***16 | Bolt (With Air Heater & Conditioner) | 2 |
| 01***20 | Screw - Turn Signal And Parkinglight Mounting | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Center)(#11087-)
| 01***10 | Bolt,(With Auto Emergency Steering) | 11 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 15 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Engine Sensor) (Tbg Spec.)(#11062-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Engine Sensor)(#11001-11086)
| 01***20 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Engine Sensor)(#11087-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 1 |
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Front)
| 01***14 | Bolt,(With Canopy) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 16 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Front) (Tbg Spec.)(#11062-)
| 01***14 | Bolt,(With Canopy) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 16 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Rear) (Tbg Spec.)(#11062-)
| 01***12 | Bolt,(With Cylinder Cover) | 1 |
| 01***14 | Bolt,(With Canopy) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Rear)(#11001-11002)
| 01***12 | Bolt,(With Cylinder Cover) | 1 |
| 01***14 | Bolt,(With Canopy) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Electrical System (Rear)(#11003-)
| 01***12 | Bolt,(With Cylinder Cover) | 1 |
| 01***14 | Bolt,(With Canopy) | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Engine Mounting Parts(#11001-11086)
| 01***55 | Bolt,(For Reinforced Type) | 8 |
| 01***55 | Bolt | 2 |
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Engine Mounting Parts(#11087-)
| 01***55 | Bolt | 2 |
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***45 | Bolt,(For L=529mm Pin) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Engine Related Hose(#11087-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Engine Related Parts(#11001-11003)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Engine Related Parts(#11004-11038)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Engine Related Parts(#11039-11086)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***45 | Bolt,(With Water Separator Type) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Exhaust(#11087-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Fuel Piping(#11001-11086)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***12 | Gasket,(Without Air Compressor Type) (K1) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Fuel Piping(#11087-)
| 01***25 | Bolt,(Rear Attachment Less) | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Instrument Panel(#11001-11086)
| 01***16 | Screw | 7 |
| 01***16 | Washer | 7 |
| 07***13 | Hose | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Instrument Panel(#11087-)
| 01***16 | Screw | 7 |
| 07***13 | Hose | 1 |
| 08***00 | Horn Switch,Ether Starting | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Main Harness (Engine)(#11087-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 14 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Radiator Mounting And Fan Guard(#11087-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
| 01***50 | Bolt,(For D60pl) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Radiator Piping(#11001-11086)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 5 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Radiator Piping(#11087-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Radiator(#11001-11086)
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 18 |
| 01***35 | Bolt, Hydraulic Tank Mounting | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Radiator(#11087-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Engine Related Parts And Electrical System : Step Box(#11063-.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***20 | Bolt? Wing,Wing | 4 |
| 01***12 | Washer,(With Body Positioner) | 4 |
Guard
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Compressor Inner Parts(#11003-11086)
| 20***10 | Air Compressor A. (Kit) | 1 |
| ND***70 | Clamp, Tapping | 1 |
| ND***40 | Compressor Assembly | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Compressor Inner Parts(#11087-)
| 42***80 | Air Compressor Assembly, A-Type | 1 |
| ND***70 | Clamp, Tapping | 1 |
| ND***00 | Washer? 0.3mm,Plate? Sk | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Conditioner (1/6) (Compressor And Mounting Part)(#11003-11086)
| 01***40 | Screw, Hex Socket | 4 |
| 01***85 | Bolt - M8 X 85lg | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Conditioner (1/6) (Compressor And Mounting Part)(#11087-)
| 01***85 | Bolt - M8 X 85lg | 4 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Conditioner (2/6) (Heater And Cooler Piping)(#11003-)
| 01***30 | Screw | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 9 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Conditioner (3/6) (Condenser And Related Parts)(#11003-)
| 01***25 | Capscrew | 2 |
| 01***12 | Bolt - M8 - 1.25 X 12 | 4 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Conditioner (4/6) (Cooling Unit And Air Damper)(#11003-11086)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***35 | Screw | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Conditioner (4/6) (Cooling Unit And Air Damper)(#11087-)
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***40 | Screw | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Conditioner (5/6) (Control Panel)(#11003-)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***12 | Screw,(Additional Sun Visor) | 4 |
| 01***08 | Washer,(For Fixed Type Ripper) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Conditioner (6/6) (Blower Duct And Grille)(#11003-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 07***29 | Clamp, Hose | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Air Conditioner Unit Inner Parts(#11003-)
| 20***10 | Case Ass'Y | 1 |
| 20***20 | Case Ass'Y | 1 |
| 20***30 | Unit Ass'Y | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Canopy(#11001-11041)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 10 |
| 01***30 | Bolt-Hex, Bolt,(With Center Guard) | 8 |
| 01***65 | Bolt (D65p) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Canopy(#11042-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 10 |
| 01***30 | Bolt - M14 X 30lg | 8 |
| 01***65 | Bolt,(For Shipping) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Condensor Inner Parts(#11003-)
| 20***60 | Shroud, Fan | 1 |
| 20***70 | Bracket | 1 |
| 20***80 | Bracket | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Control Panel Inner Parts(#11003-)
| 20***81 | Control Ass'Y | 1 |
| 26***20 | Panel | 1 |
| 26***40 | Panel,Control | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : First Aid Box(#11062-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 3 |
| 01***10 | Screw,(For Lighter) | 3 |
| 01***16 | Seat (Welded) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Floor Mat (Tbg Spec.)(#11062-)
| 26***20 | Mat,Floor | 1 |
| 26***30 | Mat,Floor | 1 |
| 26***40 | Mat,Floor | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Floor Mat (With Air Conditioner)(#11003-)
| 26***90 | Mat,Floor (Modified Part) | 1 |
| 26***30 | Mat,Floor | 1 |
| 26***10 | Mat | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (1/9) (Body)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (2/9) (Inner Panel)
| 01***16 | Screw | 12 |
| 23***30 | Button | 8 |
| 26***80 | Sheet | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (3/9) (Room Mirror And Switch)
| 01***08 | Screw - Holder | 2 |
| 01***16 | Screw, Mount Parking Lights | 9 |
| 01***16 | Screw | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (4/9) (Window Glass)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 26***60 | Glass | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (5/9) (Door)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (6/9) (Wiper)
| 01***16 | Screw, Mount Parking Lights | 9 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 10 |
| 01***13 | Washer,Spring(For Wiper Switch Earth) | 9 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (7/9) (Washer Tank)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
| 08***08 | Grommet,(Without Beacon Lamp) | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (8/9) (Wiper Relay And Lamp)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***16 | Screw,(Sandy And Dusty Terrain S.) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (9/9) (Electrical System)
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 2 |
| 01***08 | Washer,(For 1 Attachment And Pat) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Body 1/3) (1/9) (Tbg Spec.)(#11062-11062)
| 01***16 | Bolt (With Air Heater & Conditioner) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 13 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Body 1/3) (1/9) (Tbg Spec.)(#11063-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 13 |
| 01***16 | Screw | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Body 2/3) (2/9) (Tbg Spec.)(#11062-)
| 01***16 | Screw | 12 |
| 23***30 | Button | 8 |
| 26***80 | Sheet | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Body 3/3) (3/9) (Tbg Spec.)(#11062-)
| 01***08 | Screw - Holder | 2 |
| 01***16 | Screw, Mount Parking Lights | 9 |
| 01***16 | Screw | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Door) (5/9) (Tbg Spec.)(#11062-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 20 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Electrical System 1/2) (8/9) (Tbg Spec.)(#11062-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***16 | Screw,(Sandy And Dusty Terrain S.) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Electrical System 2/2) (9/9) (Tbg Spec.)(#11062-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 2 |
| 01***19 | Washer,Spring (With Extinguisher) (D31p) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Washer Tank) (7/9) (Tbg Spec.)(#11062-)
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
| 01***23 | Washer,(With Auto Emergency Steering) | 2 |
| 08***08 | Grommet,(Without Beacon Lamp) | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Window Glass) (4/9) (Tbg Spec.)(#11062-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 26***60 | Glass | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Cab (Wiper) (6/9) (Tbg Spec.)(#11062-)
| 01***16 | Screw, Mount Parking Lights | 9 |
| 01***16 | Screw,(P.O.C. Model) (Except Japan) | 10 |
| 01***13 | Washer,Spring(For Wiper Switch Earth) | 9 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Compartment
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Compartment (Tbg Spec.)(#11062-)
| 01***12 | Bolt,(With Cylinder Cover) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 9 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Compartment (With Air Conditioner)(#11003-)
| 01***12 | Bolt,(With Cylinder Cover) | 4 |
| 01***20 | Bolt,(With Auto Emergency Steering) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Seat (With Air Conditioner)(#11003-11086)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Seat (With Air Conditioner)(#11087-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Seat(#11001-11086)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***16 | Screw | 4 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Operator'S Seat(#11087-)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Radiator Guard And Engine Hood (Tbg Spec.)(#11062-11062)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 13 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 42 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Radiator Guard And Engine Hood (Tbg Spec.)(#11063-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 25 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 42 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Radiator Guard And Engine Hood(#11001-11003)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 13 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 34 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Radiator Guard And Engine Hood(#11004-11062)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 13 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 38 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 10 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Radiator Guard And Engine Hood(#11063-11086)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Radiator Guard(#11087-)
| 01***20 | Bolt,(For Mono Lever Steering) | 12 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 17 |
| 01***30 | Bolt,(With Body Positioner) | 18 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Cover (Front) (Tbg Spec.)(#11062-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 28 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 14 |
| 01***32 | Washer,(With Auto Emergency Steering) | 10 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Cover (Front)(#11001-11086)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 28 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 14 |
| 01***32 | Washer,(With Auto Emergency Steering) | 10 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Cover (Rear) (Tbg Spec.)(#11063-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 24 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 23***52 | Washer | 20 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Cover (Rear)(#11001-11002)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 32 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
| 23***52 | Washer | 20 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Cover (Rear)(#11003-11086)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***20 | Bolt,(For Mono Lever Steering) | 16 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Cover And Under Cover(#11087-)
| 01***20 | Bolt,(For Mono Lever Steering) | 14 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 26 |
| 01***32 | Washer,(With Auto Emergency Steering) | 26 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Panel (Tbg Spec.)(#11062-11062)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 25 |
| 01***08 | Screw - Clip Mounting | 1 |
| 01***10 | Screw,(With Air Conditioner) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Panel (Tbg Spec.)(#11063-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 18 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 25 |
| 01***08 | Screw - Clip Mounting | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Panel(#11001-11062)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 25 |
| 01***10 | Screw,(With Air Conditioner) | 2 |
| 01***08 | Washer,(For Fixed Type Ripper) | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Panel(#11063-11086)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 18 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 25 |
| 01***08 | Screw - Clip Mounting | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Side Panel(#11087-)
| 01***20 | Bolt,(For Mono Lever Steering) | 20 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 36 |
| 01***30 | Bolt,(With Body Positioner) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Tool Box(#11003-)
| 01***40 | Bolt (Op) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
| 26***40 | Plate | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Guard : Top Hood And Cover(#11087-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 21 |
| 01***32 | Washer,(With Auto Emergency Steering) | 12 |
| 23***52 | Washer | 9 |
Hydraulic System
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Flashing Valve
| 26***00 | Valve Ass'Y,Flashing | 1 |
| 26***10 | Block,Manifold | 1 |
| 26***20 | Block Ass'Y | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Control Valve
| 26***00 | Valve Ass'Y,Control | 2 |
| KB***05 | Bracket | 1 |
| KB***23 | Service Kit,Hydraulic Control Valve | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Oil Filter
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt | 4 |
| 01***16 | Washer,Radio Controlled Slag Handling | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Oil Suction Filter
| 07***08 | Plug,(D65ex?Px) | 1 |
| 26***00 | Filter Ass'Y | 3 |
| 26***10 | Element | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Oil Cooler Line) (1/2)(#11001-11002)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Oil Cooler Line) (1/2)(#11003-11044)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Oil Cooler Line) (1/2)(#11045-11086)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Oil Cooler Line) (1/2)(#11087-)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 6 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***09 | Nut,(For Japan) | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Oil Cooler Line) (2/2)(#11001-11086)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Oil Cooler Line) (2/2)(#11087-)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Pump To Control Valve)
| 01***25 | Bolt,Without Revolution Sensor | 14 |
| 01***30 | Bolt,(For Mechanical Governor) | 6 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Gate Cylinder Line)(#11001-11002)
| 01***40 | Bolt,(With Air Conditioner) | 1 |
| 01***65 | Bolt,(Except Japan) | 2 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Gate Cylinder Line)(#11003-)
| 01***40 | Bolt,(With Air Conditioner) | 1 |
| 01***65 | Bolt,(Except Japan) | 1 |
| 01***40 | Screw, Hex Socket | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Lift Cylinder Line) (1/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***55 | Bolt,(10m) | 4 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Lift Cylinder Linf) (2/2)
| 01***20 | Bolt,(With Auto Emergency Steering) | 8 |
| 01***45 | Bolt,(For Power Tilt Mech Angle) | 6 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Revolution Motor Line) (1/6)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 8 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Revolution Motor Line) (2/6)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 32 |
| 01***50 | Bolt,(For Strengthened Cover) | 12 |
| 01***45 | Bolt, Mounting Cranking Motor | 32 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Revolution Motor Line) (2/6) (Tbg Spec.)(#11062-)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 32 |
| 01***50 | Bolt,(For Strengthened Cover) | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 60 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Revolution Motor Line) (3/6)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 02***25 | Bolt,(Cold Weather Spec.) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Revolution Motor Line) (4/6)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***08 | Plug,(For W/O. Corrosion Resistor) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Revolution Motor Line) (5/6)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 16 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Revolution Motor Line) (6/6)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 32 |
| 01***00 | Bolt - Cover Mounting | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 32 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Shift Cylinder Line) (1/2)
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
| 01***50 | Bolt,(With Service Valve R.H.) | 1 |
| 01***65 | Bolt,(Except Japan) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Shift Cylinder Line) (2/2)(#11001-11002)
| 01***55 | Bolt,(10m) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
| 01***00 | Bolt, Mount Back-Up Alarm | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Rotor Shift Cylinder Line) (2/2)(#11003-)
| 01***55 | Bolt,(10m) | 2 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 1 |
| 01***55 | Screw | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Tank To Pump)(#11001-11082)
| 01***75 | Bolt,(For Adjusting) | 8 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Tank To Pump)(#11083-)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 20 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (1/4)(#11001-11002)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (1/4)(#11003-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***40 | Bolt,(With Service Valve R.H.) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (2/4)(#11001-11002)
| 01***12 | Bolt, Bolt,(No Need To Quick Shift) | 2 |
| 01***55 | Bolt | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (2/4)(#11003-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 24 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (3/4)(#11001-11002)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (3/4)(#11003-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (4/4)(#11001-11002)
| 01***32 | Washer, (Without Emergency Steering) | 32 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 8 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (4/4)(#11003-11044)
| 01***32 | Washer, (Without Emergency Steering) | 32 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 8 |
| 07***34 | O-Ring,(For Without Brake Assistor) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (4/4)(#11045-11086)
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Piping (Travel Motor Line) (4/4)(#11087-)
| 01***32 | Washer,(With Auto Emergency Steering) | 16 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Tank
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 16 |
| 01***20 | Bolt,(For Mono Lever Steering) | 11 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Tank (Tbg Spec.)(#11062-)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 11 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 18 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 18 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Hydraulic Tank (With Air Conditioner)(#11003-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 5 |
| 01***20 | Bolt,(For Mono Lever Steering) | 11 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 13 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Manifold Valve
| 26***90 | Spacer | 1 |
| 26***50 | Handle,Control | 1 |
| 26***30 | Valve Ass'Y | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Pilot Check Valve
| 07***14 | O-Ring,(F4350-61a0a-20 ) | 2 |
| 07***14 | Ring,Back-Up (Kit), Ring,Back-Up; Komatsu S/N 20501-22940 - Was 07001-02014 | 1 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Relief Valve
| 26***00 | Valve Ass'Y,Relief | 2 |
| KB***04 | Plug | 1 |
| KB***51 | Valve Ass'Y | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Rotor Gate Cylinder
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 1 |
| 07***55 | O-Ring,(F4350-62a1 -14 ) | 1 |
| 07***55 | Ring,Back-Up? Cylinder Head | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Rotor Lift Cylinder
| 01***85 | Bolt | 2 |
| 01***18 | Nut | 2 |
| 01***60 | Washer,Single Flange (Trimming) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Rotor Lift Cylinder (Tbg Spec.)(#11062-)
| 01***85 | Bolt | 2 |
| 01***18 | Nut | 2 |
| 01***60 | Washer,Single Flange (Trimming) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Rotor Motor
| 26***00 | Motor Ass'Y,Rotor | 2 |
| 26***01 | Motor Ass'Y,Rotor | 2 |
| 26***10 | Bolt | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Rotor Pump (1/2)(#11001-11016)
| 26***30 | Gasket | 1 |
| 26***40 | Pin,Dowel | 2 |
| 26***80 | O-Ring | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Rotor Pump (1/2)(#11017-)
| 26***30 | Gasket | 1 |
| 26***40 | Pin,Dowel | 2 |
| 26***80 | O-Ring | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Rotor Pump (2/2)(#11001-11016)
| 26***40 | Pin,Dowel | 3 |
| 26***90 | Plate | 1 |
| 26***10 | Bearing | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Rotor Pump (2/2)(#11017-)
| 26***40 | Pin,Dowel | 3 |
| 26***90 | Plate | 1 |
| 26***10 | Bearing | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Rotor Shift Cylinder
| 07***70 | O-Ring,(For Intake Air Cover) | 1 |
| 07***65 | O-Ring,(F5350-62a0 -14 ) | 1 |
| 07***65 | Ring,Back-Up (Kit) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Motor (1/2)(#11003-11044)
| 04***30 | Seal, Dust | 1 |
| 07***23 | O-Ring; Was 07002-10823, O-Ring,(Not Shown) | 1 |
| 70***02 | Motor Sub Ass'Y | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Motor (1/3)(#11045-11088)
| 04***93 | Ball,Steel | 2 |
| 07***38 | O-Ring, (Without Emergency Steering) | 2 |
| 07***23 | O-Ring,(F4350-66a1 -1c ) | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Motor (1/3)(#11089-)
| 01***35 | Screw | 12 |
| 07***06 | O-Ring,(Not Shown) | 1 |
| 07***09 | O-Ring,(For Dual Tilt Dozer) | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Motor (2/2)(#11003-11044)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***30 | Washer, Spring (Supplied W/Spider Assembly), Washer-Spring | 12 |
| 07***11 | O-Ring,(Tm8202-009) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Motor (2/3)(#11045-11088)
| (****0) | Seal,Washer | 4 |
| (****1) | Cradle | 1 |
| (****0) | Plate | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Motor (2/3)(#11089-)
| 04***25 | Ring, Snap | 1 |
| 70***91 | Seal,Oil | 1 |
| 70***30 | Spacer? 3.2mm | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Motor (3/3)(#11045-11088)
| 07***16 | O-Ring | 1 |
| 07***16 | Ring, Back-Up | 2 |
| 07***34 | O-Ring,(For 2-Actuater Attachment) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Motor (3/3)(#11089-)
| 70***12 | Valve Ass'Y,Relief | 2 |
| (7***0) | Motor Ass'Y | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Motor(#11001-11002)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***23 | Washer,(For Shipping) | 4 |
| 04***34 | Pin-Dowel, Pin,Dowel (For Shipping) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Pump (1/4)
| 26***00 | Pump Ass'Y | 1 |
| 26***01 | Pump Ass'Y | 1 |
| (****0) | Washer | 9 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Pump (2/4)
| 26***40 | Pin | 1 |
| 26***50 | Spring | 6 |
| 27***30 | Seal,Oil | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Pump (3/4)
| (****0) | Washer | 9 |
| (****0) | Valve | 2 |
| (****0) | Spacer | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Travel Pump (4/4)
| (****0) | Plate,Swash | 1 |
| (****0) | Shaft | 1 |
| (****0) | Link | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Hydraulic System : Work Equipment Pump
| 26***00 | Pump Ass'Y | 1 |
| 26***01 | Pump Ass'Y | 1 |
| KB***21 | Plate Ass'Y,Center | 1 |
Mark Plate? Tool And Kit
Komatsu : Cs360-2(S/N 11001-Up) : Mark Plate? Tool And Kit : Accessory Parts
| 09***13 | Bag,Tool (D31s) | 1 |
| 09***80 | Case,(Except Japan) | 1 |
| 09***95 | Overall,(Except Japan) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Mark Plate? Tool And Kit : Accessory Parts (Tbg Spec.)(#11062-)
| 09***13 | Bag,Tool (D31s) | 1 |
| 09***80 | Case,(Except Japan) | 1 |
| 09***50 | Overall,(For Japan) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Mark Plate? Tool And Kit : Marks And Plates (Germany)(#11062-11062)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Instruction,Fuel Oil | 1 |
| 09***35 | Plate? Name,(Limited Supply) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Mark Plate? Tool And Kit : Marks And Plates (Germany)(#11063-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Instruction,Fuel Oil | 1 |
| 09***35 | Plate? Name,(Limited Supply) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Mark Plate? Tool And Kit : Marks And Plates (Indonesian)(#11062-)
| 04***60 | Screw,Machine Model (For Ec Reg.) | 4 |
| 09***00 | Plate? Caution,Fuel | 1 |
| 09***35 | Plate? Name,Machine (Limited Supply) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Mark Plate? Tool And Kit : Tool(#11001-11086)
| 01***30 | Bolt,(For Mechanical Governor) | 30 |
| 01***30 | Bolt - M8 X 30lg | 30 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 30 |
Komatsu : Cs360-2(S/N 11001-Up) : Mark Plate? Tool And Kit : Tool(#11087-)
| 01***30 | Bolt - M8 X 30lg | 30 |
| 01***06 | Nut,(With Back-Up Alarm) (Op), Nut; Was 01580-10806 | 30 |
| 01***16 | Washer,(For 35a Alternator) | 30 |
Power Train
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Charge Pump
| KB***90 | Gear Ass'Y,Rear | 1 |
| KB***01 | Washer,Thrust | 1 |
| KB***50 | Washer,Spring | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Coupling(#11001-11064)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 11 |
| 01***40 | Bolt,(With Service Valve R.H.) | 1 |
| 01***75 | Bolt, Tube Mounting | 16 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Coupling(#11065-11088)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 11 |
| 01***40 | Bolt,(With Service Valve R.H.) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Coupling(#11089-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 12 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 12 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Drive Shaft
| 07***60 | Bolt,(For 2-Flange) | 8 |
| 23***00 | Drive Shaft Ass'Y | 1 |
| 23***10 | Spider Ass'Y | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Lubrication Piping (1/3)
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Lubrication Piping (2/3)
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Lubrication Piping (3/3)
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Lubrication Pump
| 26***00 | Pump Ass'Y,Lubrication | 1 |
| KB***01 | Seal,Oil (Kit) | 2 |
| KB***38 | Gear Ass'Y,Front | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Power Take Off (1/4)
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 8 |
| 01***50 | Bolt,(For Strengthened Cover) | 30 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Power Take Off (2/4)
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Power Take Off (3/4)
| 01***30 | Bolt,(For Mechanical Governor) | 4 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
| 01***30 | Bolt - M8 X 30lg | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Power Train : Power Take Off (4/4)
| 01***30 | Bolt,(For Mechanical Governor) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 12 |
| 01***65 | Bolt | 8 |
S6d140-1g Engine S/N 11455-Up
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Air Intake Manifold And Connection(#11455-15105)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***75 | Bolt,(For Adjusting) | 12 |
| 01***35 | Bolt | 12 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Air Intake Manifold And Connection(#15106-)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***75 | Bolt,(For Adjusting) | 12 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Alternator (35a) (With Non Hatdening Pulley)
| 60***20 | Alternator A. (35a),(With Non Hardening Pulley) | 1 |
| KD***57 | Bearing,Ball? Front | 1 |
| KD***80 | Collar | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Alternator (50a) (With Non Hardening Pulley)
| 60***60 | Alternator A. (50a) | 1 |
| SD***X0 | Washer | 1 |
| SD***10 | Nut | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Alternator And Mounting (35a? 50a) (Alternator With Non Hardeningpulley)
| 01***20 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***00 | Bolt, Mount Back-Up Alarm | 1 |
| 01***30 | Bolt | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Camshaft
| 01***20 | Bolt (M12-1.75x20) | 2 |
| 04***25 | Key, Plain Woodruff | 1 |
| 04***12 | Ring, Retaining | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Cooling Fan And Tension Pulley
| 01***16 | Bolt,(For Slag Handling) | 6 |
| 01***35 | Bolt - Torque Converter Totransmission Mounting | 6 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Corrosion Resistor And Piping
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***40 | Bolt, Mount Master Brake Cylinder | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Crankshaft
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 04***24 | Pin,Dowel (For No.3 Housing) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Cylinder Block Cover
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 5 |
| 01***65 | Bolt,(Except Japan) | 1 |
| 01***70 | Bolt, Mount Bracket And Oil Inlet Tube, Bolt | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Cylinder Block(#11455-17625)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***16 | Washer,(With Water Separator) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Cylinder Block(#17626-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 7 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***16 | Washer,(With Water Separator) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Cylinder Head(#11455-17048)
| 04***20 | Pin,Dowel (Welded) | 2 |
| 07***25 | O-Ring,Lubrication Valve | 1 |
| 07***08 | Plug (Kit) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Cylinder Head(#17049-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 6 |
| 02***04 | Plug, Pipe | 6 |
| 04***20 | Pin,Dowel (Welded) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Exhaust Manifold And Turbocharger
| 01***45 | Bolt,(For Suction? Reversible Fan) | 3 |
| 01***50 | Bolt | 1 |
| 01***55 | Screw | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Flywheel And Flywheel Housing
| 01***45 | Bolt,(For Slag Handling) | 8 |
| 01***60 | Bolt, Hanger Bearing Mounting | 2 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Front Cover And Front Support(#11455-12964)
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Front Cover And Front Support(#12965-)
| 01***30 | Bolt,(For France Noise Suppression) | 4 |
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***16 | Bolt, Mount Washer Tank To Bracket, Bolt | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Filter And Piping
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***15 | Bolt,(With Air Conditioner Type) | 2 |
| 01***16 | Washer,Radio Controlled Slag Handling | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Coupling)(#11455-14770)
| DK***00 | Coupling,Cross | 1 |
| DK***00 | Nut | 2 |
| DK***00 | Bolt | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Coupling)(#14771-)
| DK***00 | Coupling,Cross | 1 |
| DK***00 | Nut | 2 |
| DK***00 | Bolt | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Feed Pump)(#11455-14770)
| DK***20 | Bolt, Joint | 1 |
| DK***00 | Valve,Check | 2 |
| DK***20 | Tappet | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Feed Pump)(#14771-)
| DK***20 | Bolt, Joint | 1 |
| DK***00 | Valve,Check | 2 |
| DK***20 | Tappet | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Governor) (1/2)(#11455-14770)
| DK***20 | Flyweight Ass'Y | 1 |
| DK***20 | Guide Lever Ass'Y | 1 |
| DK***00 | Nut,Lock | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Governor) (1/2)(#14771-)
| DK***20 | Flyweight Ass'Y | 1 |
| DK***00 | Shim? 2.00mm,(High Altitude Spec.) | 0 |
| DK***20 | Guide Lever Ass'Y | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Governor) (2/2)(#11455-14770)
| DK***00 | Spring,Governor | 1 |
| DK***20 | Lever | 1 |
| DK***00 | Nut,Cap | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Governor) (2/2)(#14771-)
| DK***00 | Spring,Governor | 1 |
| DK***20 | Lever | 1 |
| DK***20 | Capsule,Spring | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Pump)(#11455-14770)
| 62***80 | Injection Pump A | 1 |
| DK***30 | Bearing,Roller | 2 |
| DK***20 | Housing | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump (Pump)(#14771-)
| 62***81 | Injection Pump A | 1 |
| DK***30 | Bearing,Roller | 2 |
| DK***20 | Housing | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Injection Pump And Piping
| 01***16 | Bolt,(For Slag Handling) | 3 |
| 01***25 | Bolt,(For Automatic) | 4 |
| 01***35 | Bolt | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Nozzle And Spill Pipe(#11455-12363)
| 01***20 | Bolt, Mount Main Relief Valve | 6 |
| 01***10 | Nut,(Fig.F2820-01a3-12) | 6 |
| 07***21 | O-Ring,Oil Cooler Pipe | 12 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Fuel Nozzle And Spill Pipe(#12364-)
| 01***20 | Bolt, Mount Main Relief Valve | 6 |
| 01***10 | Nut,(Service Only) | 6 |
| 07***21 | O-Ring,Oil Cooler Pipe | 12 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Gasket Kit
| 02***37 | O-Ring,(For Pc750?1800) (A5010) | 2 |
| 02***75 | O-Ring,(For Japan) (K1) | 4 |
| 07***06 | O-Ring,Corrosion Resistor | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Idler Gear
| 01***30 | Bolt,(Cold Terrain Spec.) | 6 |
| 01***80 | Bolt | 1 |
| 01***45 | Washer,(Without R.O.P.S.) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Lubricating Oil Cooler
| 01***25 | Bolt,Without Revolution Sensor | 2 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 13 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Lubricating Oil Filter And Piping
| 01***16 | Bolt,(For Slag Handling) | 3 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***60 | Bolt, Mount Tube To Switch Pump | 5 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Lubricating Oil Pump And Suction Pipe(#11455-12394)
| 01***25 | Bolt,(Without Auto Priming System) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Lubricating Oil Pump And Suction Pipe(#12395-)
| 01***25 | Bolt,(Without Auto Priming System) | 4 |
| 01***20 | Bolt,(Large Capacity Type) (Std) | 1 |
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Muffler And Mounting
| 01***25 | Bolt,(Sandy? Dusty Terrain Spec.) | 1 |
| 01***35 | Bolt, Mounting - Flywheel Housing End | 2 |
| 01***50 | Bolt | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Oil Pan(#11455-14438)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***30 | Bolt,(For Quick Shift) (Mitsubishi) | 26 |
| 01***16 | Washer,Radio Controlled Slag Handling | 34 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Oil Pan(#14439-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 40 |
| 01***16 | Washer,Radio Controlled Slag Handling | 40 |
| 04***14 | Pin, Dowel | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Piston And Connecting Rod
| 02***13 | Pin, Dowel | 2 |
| 04***20 | Ring, Retaining | 12 |
| 62***40 | Metal Ass'Y | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Rocker Arm And Housing(#11455-17048)
| 01***90 | Bolt,(For No?1 And No?3 Housing) | 2 |
| 01***08 | Nut,R.H. Thread | 12 |
| 01***32 | Washer, (Without Emergency Steering) | 16 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Rocker Arm And Housing(#17049-19971)
| 01***20 | Bolt | 1 |
| 01***90 | Bolt,(For No?1 And No?3 Housing) | 2 |
| 01***08 | Nut,R.H. Thread | 12 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Rocker Arm And Housing(#19972-)
| 01***20 | Bolt | 1 |
| 01***90 | Bolt,(For No?1 And No?3 Housing) | 2 |
| 01***80 | Bolt (M12-2.00x80) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Rocker Arm Housing Cover(#11455-19971)
| 01***65 | Bolt,R.H | 18 |
| 62***10 | Cover,Rocker Arm Housing | 6 |
| 62***20 | Washer | 18 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Rocker Arm Housing Cover(#19972-)
| 01***55 | Screw | 18 |
| 62***11 | Cover,Rocker Arm Housing | 6 |
| 62***20 | Gasket, Rocker Lever Housing | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Starting Motor (7.5kw)
| 60***80 | Starting Motor Ass'Y,(7.5kw) | 1 |
| KD***20 | Magnetic Switch Assembly | 1 |
| KD***40 | Spring,Spring | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Starting Motor And Mounting (7.5kw)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***40 | Bolt,(With Center Guard) | 3 |
| 01***16 | Washer,(With Water Separator) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Turbocharger
| 01***16 | Bolt,(For Slag Handling) | 4 |
| 01***16 | Bolt | 8 |
| 04***08 | Pin, Dowel | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Turbocharger Lubricating Oil Piping
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(For Quick Shift) (Mitsubishi) | 1 |
| 01***16 | Washer,Radio Controlled Slag Handling | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : S6d140-1g Engine S/N 11455-Up : Water Pump And Mounting
| 01***20 | Bolt,(Sandy? Dusty Terrain Spec.) | 6 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***90 | Bolt, Fan Mounting | 3 |
Sa6d140e-3g-7 Engine S/N 110001-Up
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : After Cooler Water Piping
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Air Cleaner (Inner Parts)(#110001-110670)
| 60***10 | Cover Assembly | 1 |
| 60***71 | O-Ring | 1 |
| 60***00 | Element Assembly, Air Cleaner | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Air Cleaner (Inner Parts)(#110671-)
| 60***10 | Cover Assembly | 1 |
| 60***71 | O-Ring | 1 |
| 60***00 | Element Assembly, Air Cleaner | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Air Cleaner(#110001-110670)
| 01***30 | Bolt,(With Body Positioner) | 3 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Air Cleaner(#110671-)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 3 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Air Intake Manifold And After Cooler
| 01***45 | Bolt,(With Water Separator Type) | 8 |
| 01***12 | Bolt,(See Fig. K0210-16a0) | 2 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Alternator (35a) (Hardening Pulley) (Inner Parts)
| 60***11 | Alternator A. (35a) | 1 |
| KD***70 | Bushing,Insulate | 1 |
| KD***40 | Bushing,Insulate | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Alternator Mounting (35a) (Hardening Pulley)(#110495-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 3 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***20 | Screw | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Camfollower
| 04***12 | Ring, Retaining | 4 |
| 61***30 | Pin,Dowel | 12 |
| 61***20 | Ball | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Camfollower Cover
| 61***91 | Packing,(See Fig.A2060) | 9 |
| 62***10 | Cover, Camfollower | 3 |
| 62***71 | Screw | 9 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Camshaft
| 01***20 | Bolt (M12-1.75x20) | 2 |
| 04***25 | Key, Plain Woodruff | 1 |
| 62***12 | Camshaft Assembly | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Caution Plate
| 62***60 | Plate,Japanese | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Common Rail (Inner Parts)
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Cooling Fan
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
| 60***60 | Fan, Cooling | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Corrosion Resistor
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***35 | Bolt, Mount Bracket To Floor | 4 |
| 01***00 | Bolt (M10-1.50x100) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Crank Pulley(#110495-)
| 04***24 | Pin,Dowel (For No.3 Housing) | 1 |
| 62***20 | Bolt | 6 |
| 62***20 | Pulley | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Crankshaft
| 04***28 | Pin, Dowel - Transmission Case, Pin-Dowel | 1 |
| 61***30 | Key Parallel | 1 |
| 62***00 | Bearing Assembly | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Cylinder Block
| 01***25 | Screw | 12 |
| 01***45 | Washer,(Without R.O.P.S.) | 14 |
| 01***32 | Washer, (Without Emergency Steering) | 12 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Cylinder Block Cover And Oil Filler (With Water Temperature Sensor)
| 01***50 | Bolt,(Spark Arrester Spec.) | 12 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Cylinder Block Gasket Kit
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 1 |
| 07***50 | O-Ring,Front Cover Plate | 1 |
| 07***42 | O-Ring,(See Fig.A3310) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Cylinder Head Gasket Kit
| 02***75 | O-Ring,(See Fig.A1310) | 2 |
| 07***25 | O-Ring,(For Pc1800e-6)(See Fig.A3110) | 6 |
| 07***11 | O-Ring,(See Fig.A4210) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Cylinder Head(#110150-)
| 01***20 | Bolt (M10-1.75x120) | 6 |
| 01***45 | Washer, Spring | 36 |
| 07***25 | O-Ring,(For Pc1800e-6)(See Fig.A3110) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Engine Mounting(#110495-)
| 62***60 | Support,Front | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Exhaust Manifold
| 01***55 | Screw | 2 |
| 01***00 | Screw | 22 |
| 07***08 | Plug,(For W/O. Corrosion Resistor) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fan Drive(#110495-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 6 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fan Pulley (Non Hardening)(#110495-)
| 01***30 | Bolt,(With Body Positioner) | 6 |
| 04***63 | V-Belt Set,(High Speed Pulley) (E/J) | 1 |
| 62***20 | Pulley | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Flywheel
| 61***51 | Gear, Ring | 1 |
| 62***50 | Bolt | 6 |
| 62***00 | Flywheel Assembly | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Flywheel Housing(#110495-)
| 01***45 | Capscrew - M16 | 8 |
| 01***60 | Capscrew | 2 |
| 01***12 | Bolt,(See Fig. K0210-16a0) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Front Cover (Air Compressor Spec.)
| 07***16 | Plug, Expansion | 4 |
| 62***21 | Cover, Front | 1 |
| 62***22 | Cover,Front | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Front Cover Mounting And Breather
| 01***16 | Bolt - Box Mounting | 2 |
| 01***90 | Capscrew | 2 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Front Power Take Off Cover (For Compressor Less)
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***95 | Bolt,(For Shipping) | 2 |
| 01***15 | Bolt | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Control (Chassis Mount)(#110495-110672)
| 78***02 | Controller | 1 |
| 78***00 | Controller | 1 |
| (7***3) | Controller | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Control (Chassis Mount)(#110673-)
| 78***00 | Controller | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Filter
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***35 | Bolt, Mount Bracket To Floor | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Injector
| 01***10 | Bolt - Relay And Flasher Mounting | 6 |
| 01***35 | Bolt | 6 |
| 01***70 | Bolt | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Piping
| 01***25 | Screw | 4 |
| 01***30 | Bolt,See Fig. K4010-17a0 | 14 |
| 01***35 | Bolt | 7 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Pump Supply And Return Piping
| 01***30 | Bolt,See Fig. K4010-17a0 | 6 |
| 01***35 | Bolt | 2 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Return
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 5 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Supply Pump (Feed Pump) (Inner Parts)
| ND***70 | Washer,Union | 6 |
| ND***10 | Spring, Check Valve | 2 |
| ND***42 | Screw | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Supply Pump (Pump) (Inner Parts)
| 62***20 | Fuel Pump Assembly | 1 |
| ND***70 | Washer,Union | 5 |
| ND***60 | Screw | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Supply Pump And Common Rail Mounting
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
| 01***11 | Nut (Op) | 1 |
| 01***45 | Washer,(Except Pll) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Supply Pump Bracket And Connection Cover
| 01***12 | Bolt,(See Fig. K0210-16a0) | 4 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 4 |
| 01***20 | Bolt - Mount Risers To Cab Floor | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Fuel Supply Pump Lubricator
| 07***12 | Gasket,(Without Air Compressor Type) (K2) | 2 |
| 07***10 | Screw, Banjo Connector (M10-1.25x20) | 1 |
| 62***20 | Tube, Supply | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Head Cover
| 62***10 | Cover, Cylinder Head | 6 |
| 62***20 | Gasket,(See Fig.A1110) | 6 |
| 62***30 | Gasket (K1) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Head Cover Bolt
| 01***55 | Screw | 18 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Heat Shield(#110113-)
| 01***16 | Bolt - Starting Motor Ground Cable | 2 |
| 01***15 | Bolt | 3 |
| 01***50 | Bolt (M10-1.50x150) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Idler Gear
| 01***30 | Bolt - M8 X 30lg | 6 |
| 61***60 | Pin, Dowel | 1 |
| 61***22 | Bolt | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Muffler
| 01***35 | Bolt | 6 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
| 01***40 | Bolt,(Shim 3-Piece) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Name Plate And Caution Plate (English)
| 04***50 | Screw | 4 |
| 09***45 | Plate? Name,(Limited Supply) | 1 |
| 60***40 | Plate? Name,(Limited Supply) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Oil Cooler
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 2 |
| 01***30 | Bolt - Lower Oil Cooler Outlet Tubemounting | 13 |
| 01***60 | Bolt - Upper Cooler Inlet Tubemounting | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Oil Filter
| 01***35 | Bolt, Mount Bracket To Floor | 2 |
| 01***60 | Bolt (M10-1.50x160) | 2 |
| 07***45 | O-Ring,(For Wt800e-1) (See Fig.A3110) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Oil Level Gauge(#110495-)
| 61***20 | Collar | 1 |
| 61***30 | Nut,(For Shipping) | 1 |
| 62***10 | Gauge,Oil Level | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Oil Pan And Suction Tube(#110495-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
| 01***12 | Bolt,(See Fig. K0210-16a0) | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Oil Pump
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Piston
| 02***13 | Pin, Dowel | 2 |
| 04***20 | Ring, Retaining | 12 |
| 62***10 | Bolt | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Rocker Arm
| 01***08 | Nut,R.H. Thread | 2 |
| 01***32 | Washer, (Without Emergency Steering) | 6 |
| 04***14 | Pin, Dowel | 18 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Starting Motor (11kw) (Inner Parts)(#110001-111453)
| 60***21 | Starting Motor Assembly (11kw) | 1 |
| KD***40 | Spring,Spring | 4 |
| KD***57 | Bearing, Ball, Front | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Starting Motor Mounting (11kw)
| 01***40 | Bolt (Kit) | 3 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 08***19 | Band,(Without Air Conditioner) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Thermostat And Air Vent(#110495-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***16 | Bolt - Starting Motor Ground Cable | 1 |
| 01***65 | Screw | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Turbocharger (Ktr110l-3h4e) (Inner Parts)
| 01***16 | Bolt | 4 |
| 01***16 | Bolt | 8 |
| 04***08 | Pin, Dowel | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Turbocharger And Oil Piping
| 01***35 | Bolt, Cover | 1 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 1 |
| 01***25 | Bolt, Mount Engine Oil Drain To Fuel Tank | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Vibration Damper
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***25 | Bolt,L.H. (For Add. Air Compressor) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Water Line Plug (Without Corro.Rstr.)(#112318-)
| 01***75 | Bolt | 1 |
| 07***12 | Gasket,(Without Air Compressor Type) (K1) | 3 |
| 07***00 | Valve,Drain | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Water Pump Gasket Kit
| 02***37 | O-Ring,(For Pc750?1800) (A5010) | 2 |
| 07***45 | O-Ring,(F4320-61a0 -16 ), O-Ring; Was 07000-02145 | 1 |
| 07***70 | O-Ring,(For Pc1800e-6)(See Fig.A2041) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Water Pump(#110495-)
| 01***80 | Bolt (M10-1.50x80) | 1 |
| 01***95 | Bolt,(For Shipping) | 3 |
| 01***30 | Bolt | 3 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Wiring (1/3) Switch And Heater(#110495-)
| 01***20 | Bolt,(Forwarded Individually Parts) | 4 |
| 01***55 | Bolt, Mount Dryer To Bracket And Frame | 2 |
| 01***75 | Bolt | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Wiring (2/3) Fuel Injector(#110495-)
| 01***25 | Bolt - Relay Mounting | 1 |
| 01***40 | Bolt,(Shim 3-Piece) | 1 |
| 04***10 | Clip,(With Accumulator) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Sa6d140e-3g-7 Engine S/N 110001-Up : Wiring (3/3) Sensor(#110495-)
| 01***40 | Bolt (Op) | 1 |
| 01***16 | Bolt - Starting Motor Ground Cable | 6 |
| 01***20 | Bolt, Hose Clamps (Inlet And Return Line Hoses) | 2 |
Under Carriage
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Carrier Roller(#.-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 1 |
| 11***85 | Floating Seal Ass'Y | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Carrier Roller(#11001-11002)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***75 | Bolt | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Carrier Roller(#11003-11044)
| 01***20 | Bolt,(Large Capacity Type) (Std) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***80 | Bolt,(For Adjustable Rod) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Carrier Roller(#11045-.)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 06***10 | Bearing | 2 |
| 07***75 | O-Ring,Steering Oil Filter | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Final Drive(#11001-11002)
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 8 |
| 01***70 | Bolt,Rear Carrier (With Gumpad) | 36 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Final Drive(#11003-11044)
| 01***20 | Bolt,(With Auto Emergency Steering) | 12 |
| 01***65 | Bolt | 3 |
| 01***70 | Bolt,Rear Carrier (With Gumpad) | 40 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Final Drive(#11045-11088)
| 01***55 | Bolt, Mount Tube To Switch Pump | 3 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 4 |
| 01***70 | Bolt,Rear Carrier (With Gumpad) | 36 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Final Drive(#11089-)
| 01***60 | Capscrew | 36 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 72 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Front Idler(#11001-11002)
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 2 |
| 07***24 | Plug | 1 |
| 20***90 | Pin,Dowel | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Front Idler(#11003-11044)
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 2 |
| 07***24 | Plug | 1 |
| 13***61 | O-Ring Ass'Y,Retainer | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Front Idler(#11045-)
| 07***60 | O-Ring,(For Pc750?800?1800) (A2610) | 2 |
| 07***24 | Plug | 1 |
| 20***90 | Pin,Dowel | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Recoil Spring(#11001-11002)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***50 | Bolt,(For Tbg/Abe Spec.) | 8 |
| 01***38 | Nut | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Recoil Spring(#11003-11044)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***70 | Bolt,Rear Carrier (With Gumpad) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Recoil Spring(#11045-)
| 01***65 | Bolt - Battery Box | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Frame(#11001-11002)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 4 |
| 01***50 | Bolt,(For Strengthened Cover) | 6 |
| 01***50 | Bolt,(For Tree Pusher) | 16 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Frame(#11003-11044)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 24 |
| 01***50 | Bolt,(For Tree Pusher) | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Frame(#11045-)
| 01***30 | Bolt,(Not Used With Emergency Str.) | 12 |
| 01***75 | Capscrew | 8 |
| 01***50 | Bolt,(For Large Size Tire) | 16 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Roller(#11001-11002)
| 01***85 | Bolt,(For Perforated Mask) | 72 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 72 |
| 07***08 | Plug,(Without Lock-Up), Plug | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Roller(#11003-11044)
| 01***80 | Bolt,(For Adjustable Rod) | 72 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 72 |
| 07***24 | Plug | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Roller(#11045-)
| 01***45 | Washer,(Without R.O.P.S.) | 72 |
| 15***70 | O-Ring | 1 |
| 20***60 | O-Ring | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole) (Tbg. Spec.)(#11063-)
| 15***20 | Nut? Shoe (Y0320-K1) | 442 |
| 20***23 | Track Link Ass'Y,600thgpc200l | 1 |
| 20***04 | Track Shoe Ass'Y | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Shoe(#11001-11002)
| 15***20 | Nut? Shoe (Y0320-K1) | 392 |
| 20***93 | Pin? Master | 4 |
| 20***22 | Link,Track? L.H | 98 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Shoe(#11003-11044)
| 13***22 | Link,Track? L.H | 98 |
| 13***32 | Link,Track? R.H | 98 |
| 13***41 | Bushing? Regular | 94 |
Komatsu : Cs360-2(S/N 11001-Up) : Under Carriage : Track Shoe(#11045-)
| 15***20 | Nut? Shoe (Y0320-K1) | 392 |
| 20***23 | Track Link Ass'Y,600thgpc200l | 1 |
| 20***43 | Track Shoe Ass'Y | 1 |
Work Equipment
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Bit Box (Side Disk L.H.)
| 26***20 | Box,Bit (Welded) | 12 |
| 26***31 | Box Ass'Y | 5 |
| 26***41 | Box Ass'Y | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Bit Box (Side Disk R.H.)
| 26***20 | Box,Bit (Welded) | 12 |
| 26***31 | Box Ass'Y | 5 |
| 26***31 | Box Ass'Y | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (1/6) (Tbg Spec.)(#11062-)
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (1/7)
| 01***45 | Screw | 48 |
| 01***50 | Bolt (Kit) | 48 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (2/6) (Tbg Spec.)(#11062-)
| 01***16 | Bolt (With Air Heater & Conditioner) | 12 |
| 01***25 | Bolt,Without Revolution Sensor | 8 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (2/7)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 6 |
| 01***80 | Bolt,(For Adjustable Rod) | 8 |
| 01***55 | Bolt,(With Hook) | 4 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (3/6) (Tbg Spec.)(#11062-11062)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 36 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 32 |
| 01***85 | Bolt | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (3/6) (Tbg Spec.)(#11063-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 36 |
| 01***45 | Bolt, Mounting Bracket To Radiator (Top) | 32 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (3/7)(#11001-11014)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 20 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 32 |
| 01***65 | Bolt | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (3/7)(#11015-11036)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 20 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 32 |
| 01***80 | Bolt,(For 100kg) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (3/7)(#11037-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 28 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 32 |
| 01***80 | Bolt,(For 100kg) | 6 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (4/6) (Tbg Spec.)(#11062-)
| 01***30 | Bolt,(For Mechanical Governor) | 6 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (4/7)
| 01***30 | Bolt,(For Mechanical Governor) | 6 |
| 01***20 | Bolt,(For Quick Shift) (Mitsubishi) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (5/6) (Tbg Spec.)(#11062-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 36 |
| 01***60 | Bolt, Tube To Oil Cooler | 24 |
| 01***45 | Bolt,(For Travel Motor) (Not Show) | 1 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (5/7)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 24 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 36 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (6/6) (Tbg Spec.)(#11062-)
| 01***30 | Bolt,(For Mechanical Governor) | 70 |
| 01***75 | Screw | 80 |
| 01***00 | Bolt | 40 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (6/7)(#11001-11005)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 24 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (6/7)(#11006-11006)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 24 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (6/7)(#11007-11036)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 24 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (6/7)(#11037-)
| 01***20 | Bolt,(With Auto Emergency Steering) | 4 |
| 01***30 | Bolt,(Not Used With Emergency Str.) | 24 |
| 01***35 | Bolt, Bolt, Mount Tubes To Switch And Work Pumps | 24 |
Komatsu : Cs360-2(S/N 11001-Up) : Work Equipment : Rotor (7/7)
| 01***55 | Bolt,(With Hook) | 16 |
| 01***70 | Bolt,Leaning Lock | 48 |
| 01***75 | Bolt | 16 |
Frequently asked questions
What engine does the Komatsu CS360-2 (S/N 11001-UP) use?
It uses Komatsu's SA6D140E-3-A turbocharged diesel from the SA6D140 engine family, rated at roughly 265 kW (355 hp, about 360 PS). The same engine family also powers the wheeled GS360-2 sibling.
What is the operating weight of the Komatsu CS360-2 (S/N 11001-UP)?
An exact factory operating weight for this serial range is not documented in available specs. Crawler stabilizers built around the SA6D140-family engine generally fall in the low-to-mid 20 tonne class; confirm the precise figure for this serial range with your Komatsu dealer.
What replaced the Komatsu CS360-2 (S/N 11001-UP)?
Komatsu carried the crawler stabilizer concept forward into later generations of the CS360 line, alongside the deeper-cutting CS360SD-2A variant built on the same platform. Komatsu no longer lists a current-production crawler stabilizer in this exact class, so parts support today runs mainly through dealer stock and the aftermarket.
What CS360-2(S/N 11001-UP) owners discuss
What do owners say about the SA6D140E-3 engine's reliability in the CS360-2?
General consensus on this mechanically-injected 140-series engine family is that the base engine is a solid workhorse, but the fuel system is the weak link operators complain about most. Hard-starting or rough-running complaints usually trace back to a worn fuel transfer pump, air getting into the supply lines, or an injection pump that has lost its timing setting rather than a major internal failure - techs recommend checking for air in the lines and confirming pump timing before condemning the injection pump itself. Intermittent rough-running has also been traced to a fuel pump drive gear that lost its timing key. Injection timing work is safety-critical and affects emissions compliance - have your dealer verify.
How does the crawler undercarriage hold up on a self-propelled stabilizer like this?
The swamp-shoe crawler layout gives good flotation and stability on the loosened, freshly-mixed subgrade it works on, and owners of this class of crawler stabilizer generally report lighter undercarriage wear than a dozer of similar weight since the tracks ride mostly on broken-up material rather than raw ground. The recurring complaint is packed soil and stabilizing agent building up between pads and sprockets, which accelerates wear if the undercarriage isn't cleaned out regularly and track tension isn't checked often. Loose or over-tight track tension on a crawler this size affects stability on grade - have your dealer verify tension specs for this machine.
What takes the most wear on the mixing rotor and chamber?
Rotor picks/teeth and the mixing chamber liner plates are the parts that see the most abuse, especially in stony ground or pavement with old patch repairs. Community consensus among reclaimer and stabilizer operators is that staggered carbide tooth patterns cut cleaner and last longer than straight patterns, and that matching cutting depth to the material (not going too deep) meaningfully cuts down on broken tips and drum stress. Worn liner plates are commonly flipped or rotated before they're fully replaced, stretching service life between changeouts.
What electrical or sensor issues come up on this machine and engine family?
Erratic hydraulic pressure sensors and solenoids are more often traced to contaminated hydraulic oil, corroded connector pins, or heat-soaked wiring near the engine bay than to an actually failed sensor. The common advice from techs working on this engine and hydraulic pedigree is to clean and dielectric-grease connectors and pull an oil sample before swapping sensors, since sensor replacement often doesn't fix an intermittent fault caused by contamination upstream.
Does the offset rotor mechanism have any known quirks?
The hydraulically actuated offset shift, which lets the rotor extend beyond the track edge for edge work, is generally described as reliable but can get sluggish or stick partway through its travel. That's most often down to worn offset cylinder seals or debris packed in the slide rails rather than a pump problem - keeping the slide rails clean and greased is the common preventive tip.
Any consensus on the water/dust suppression system?
Machines in this stabilizer/reclaimer class use a water spray system for dust control and to help cool the mixing chamber during operation. This isn't heavily documented for this specific serial range, but the general habit reported by operators of similar machines is to flush the lines and nozzles after each shift, since stabilizing agents and mineral buildup clog nozzles quickly if left standing - treat as a general good-practice note rather than a documented factory bulletin for this unit.
What should a buyer check on a used CS360-2 (S/N 11001-up)?
Inspect rotor pick/tooth wear and chamber liner condition first, since these are the highest-wear items and expensive to replace. Cycle the offset mechanism fully in both directions and watch for sticking or uneven speed. Pull a hydraulic oil sample and check for contamination, and inspect connector pins and wiring near the engine bay for corrosion. Walk the undercarriage for pad wear, sprocket wear, and packed-in material, and check track tension. Compare engine hours against the machine's job history - stabilizing work is lower-impact on the undercarriage than dozing but harder on the rotor and mixing chamber, so hours alone don't tell the full story. Ask for maintenance records covering fuel system service, and review any history of fuel pressure or injection-timing complaints. Have your dealer verify injection timing and hydraulic system condition before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CS360-2(S/N 11001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.