Komatsumobile debris crusher(no series)
Komatsu BR480RG-1-W1(S/N 1001-UP)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu BR480RG-1-W1 (S/N 1001-UP) is a self-propelled, crawler-mounted mobile impact crusher in the roughly 38 to 40 tonne (84,000 to 88,000 lb) class, built for on-site demolition and concrete recycling. It runs a Komatsu SAA6D125E-2 turbocharged, aftercooled diesel rated at about 228 kW (306 hp) driving a KR1313-type impact crusher through Komatsu's HydrauMind hydraulic system. It arrived in the early 2000s as the largest impact crusher in Komatsu's Galeo mobile crusher lineup, sold alongside jaw-crusher siblings such as the BR350JG-1, BR380JG-1, and BR550JG-1 that share the same 6D125-family engine base. The -W1 designation marks the export/overseas specification of this serial range, distinct from the -M1 regional variant sold under the same base model; differences between them are chiefly in emissions and electrical spec for the target market rather than the core crusher hardware.
Within this platform, Komatsu paired a variable-speed rotor drive with automatic gap adjustment and a semi-automated grizzly feeder that backs off automatically when the crusher senses overload, a notable step up in automation for a mobile impactor of its era. That combination let one machine handle mixed demolition debris and natural stone in a single pass at higher throughput than Komatsu's smaller BR-series crushers. The model has since been superseded by later Galeo-generation crushers, but its size class, proven SAA6D125E engine, and shared drivetrain lineage with contemporary Komatsu excavators and loaders keep parts and service support active in the used equipment market. For buyers and shops working recycling or demolition fleets, it remains a common used unit valued for crushing capacity per hour relative to its transportable, self-propelled footprint.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu BR480RG-1-W1(S/N 1001-UP) specifications
Engine
| Engine model | Komatsu SAA6D125E-2, water-cooled turbocharged diesel |
| Power output | Approx. 228 kW (306 hp) as published by dealer/trade spec sheets; gross vs net rating not separately confirmed for this serial range |
| Cylinders | 6, inline |
| Displacement | Approx. 11.0 L, based on SAA6D125E-series engine data (BR480RG-1-specific displacement figure not independently published) |
| Emissions tier | Not documented for this exact serial range (S/N 1001-UP) — verify with your dealer |
Weights
| Operating weight | Approx. 38,290 kg (84,440 lb) as published in trade spec listings |
| Shipping weight | Not documented separately from operating weight in available sources |
| Ground pressure | Not documented — verify with your dealer |
Dimensions
| Transport length | Not documented for this exact serial range — verify with your dealer |
| Transport width | Not documented for this exact serial range — verify with your dealer |
| Transport height | Not documented for this exact serial range — verify with your dealer |
| Track gauge / wheelbase | Not documented in available sources |
| Ground clearance | Not documented in available sources |
Performance
| Crushing/production capacity | Up to approx. 400 t/h (441 US tons/h), as stated in Komatsu-sourced product material; the BR480RG-1 was marketed as the largest impact crusher in the Komatsu mobile crusher line at introduction |
| Travel speed | Not documented as a specific figure — product material notes the undercarriage and hydraulic steering give high travel speed for relocation, but no km/h value is published in available sources |
| Gradeability | Not documented — verify with your dealer |
Service capacities (summary)
| Fuel tank | Not documented for this exact serial range — verify with your dealer |
| Hydraulic system | Not documented for this exact serial range — verify with your dealer |
| Engine oil | Not documented for this exact serial range — verify with your dealer |
| Cooling system | Not documented for this exact serial range — verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BR480RG-1-W1(S/N 1001-UP) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — SAA6D125E-2 | Not published for this exact serial range (S/N 1001-UP). The sibling BR550JG-1, which shares the same SAA6D125E-2 engine, is documented around 38 L (10.0 US gal); treat this as a same-engine reference only, not a confirmed BR480RG-1-W1 figure — verify against the OMM refill table or with your Komatsu dealer. | Komatsu Genuine engine oil, selected by ambient temperature per the OMM's fuel/coolant/lubricant chart: EO15W40-DH (SAE 15W-40, API CI-4/JASO DH-1) for general/warm climates, stepping to EO10-30 or EO10W in cold climates and EO30 in hot climates. |
| Cooling system (radiator + block) | Not published for this exact serial range. Sibling BR550JG-1 (same engine family) references roughly 44 L (11.6 US gal); actual capacity varies by configuration/series for this frame — verify with the OMM or dealer. | Komatsu Genuine Super Coolant (AF-NAC permanent-type antifreeze/anti-corrosion coolant), mixed to the ratio specified for the expected minimum ambient temperature. |
| Fuel tank | Not published for this exact serial range. Sibling BR550JG-1 references roughly 605 L (159.8 US gal); capacity varies by configuration/series — verify with the OMM or dealer. | No. 2-D diesel fuel (ASTM D975) for normal ambient temperatures; switch to No. 1-D in cold climates per the OMM's ambient-temperature fuel guidance. |
| Hydraulic system (tank and circuit) | Not documented in available sources for this exact model/serial range; hydraulic tank sizing is machine-specific for this crusher chassis and was not corroborated — verify against the OMM refill-capacity table or with your Komatsu dealer. | Komatsu Genuine Super Hydraulic Oil HO46-HM (or the OMM's specified viscosity grade for the expected ambient temperature range). |
| Travel final drives (each, undercarriage) | Not documented in available sources for this model. | Komatsu Genuine Powertrain/gear oil (TO-series) per the final-drive spec in the OMM. |
| Crusher, feeder, and conveyor grease points | Spec only — no total grease volume published for this model. | Komatsu Genuine multipurpose lithium EP grease G2-LI for general grease points; use the molybdenum-disulfide variant where the OMM calls for high-load pin/bushing joints. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu BR480RG-1-W1(S/N 1001-UP) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the BR480RG-1-W1(S/N 1001-UP) beyond the schedule
Predictive Maintenance & Fluid Analysis
Run scheduled oil sampling on the SAA6D125E-2 engine and the hydraulic system to catch bearing wear or contamination before the impactor rotor or drive pump fails in the field. Track blow bar and impact plate wear against tonnage crushed rather than hours alone, since concrete debris wears liners faster than natural stone. Watch hydraulic oil temperature and filter differential pressure on the HydrauMind circuit; rising temps under load often flag a failing cooler or worn pump before a hard failure.
Corrective & Common Repairs
Expect recurring wear at the grizzly feeder bars and two-stage screen, where compacted debris jams the feed; clear and inspect for cracked bars each shift. Impact plates and blow bar edges chip or crack under concrete rebar strikes; rotate or replace before rotor imbalance vibrates bearings loose. Crawler track pins, rollers, and sprockets take heavy abrasive wear on demolition sites; re-tension tracks and replace worn shoes before metal-to-metal contact scores the frame rails.
Overhaul & Rebuild Points
At major overhaul, pull the crusher rotor to inspect bearings, eccentric shaft bushings, and balance weights; vibration from an out-of-balance rotor shortens frame and drive-coupling life fast. Rebuild or replace the hydraulic drive motors and main pumps feeding the crusher and crawler travel circuits once output pressure drops off spec. Reline the impactor housing wear plates and check the main frame around the crusher mounting for stress cracks, a known fatigue point on high-hour units.
Seasonal & Environment Servicing
Cold-weather starts on the SAA6D125E-2 demand correct-viscosity engine oil and a fully charged battery; a block heater helps in sub-zero yards. Dusty demolition and recycling sites clog the air cleaner and radiator fins fast, so inspect and clean more often than the standard interval when crushing dry concrete. Wet or muddy sites accelerate crawler undercarriage wear and pack debris into the grizzly feeder and conveyor rollers, so step up undercarriage greasing and washdown frequency in those conditions.
BR480RG-1-W1(S/N 1001-UP) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 208-60-61180 | Element | Scheduled service item | Check fitment → |
| 20Y-60-21460 | Neck,Filter | Scheduled service item | Check fitment → |
| 20Y-60-21470 | Element | Scheduled service item | Check fitment → |
| 8296-79-1370 | Filter | Scheduled service item | Check fitment → |
| 8296-79-1180 | Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BR480RG-1-W1(S/N 1001-UP) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CA111 | Internal engine controller (ECM) malfunction | ECM internal fault or corrupted memory | Cycle key off/on; if code returns, have engine ECM checked with diagnostic tool and replace if faulty |
| CA115 | Engine crankshaft speed sensor / backup speed sensor circuit failure | Damaged sensor, broken wiring, or loose connector at crank speed sensor | Inspect sensor wiring and connector, check sensor air gap, replace sensor if circuit tests open or shorted |
| CA123 | Boost (intake manifold) pressure sensor feedback voltage too low / open circuit | Faulty boost pressure sensor or broken sensor harness | Check sensor connector and wiring for continuity, replace sensor if voltage stays out of range |
| CA144 | Coolant temperature sensor feedback voltage too high / open circuit | Failed coolant temp sensor or open circuit in sensor wiring | Inspect sensor and connector, test sensor resistance against spec, replace if out of range |
| CA154 | Intake air temperature sensor feedback voltage too low / short circuit | Shorted sensor circuit or failed intake air temp sensor | Check wiring for chafing/short to ground, test and replace sensor if needed |
| CA234 | Engine overspeed condition detected | Machine operated with excessive load drop-off, governor/injection fault, or downhill travel without engine braking | Reduce throttle immediately, check governor and fuel system operation, have injection pump/ECM settings checked |
| CA271 | Fuel injection metering valve (IMV/PCV) circuit short | Shorted valve solenoid winding or damaged harness at the metering valve | Check valve connector and wiring for shorts, test solenoid resistance, replace valve or repair harness |
| CA435 | Engine oil pressure switch failure | Faulty oil pressure switch or wiring fault, occasionally low oil pressure itself | Check engine oil level first, then test switch and wiring; replace switch if it fails continuity/pressure test |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BR480RG-1-W1(S/N 1001-UP) attachments & work tools
Impact crusher chamber (primary work tool)
KR1313 rotor-and-blow-bar impactor rated for the 40-ton mobile crusher class, giving roughly 1.5-2x the crushing ratio of a comparable jaw crusher and a maximum processing capacity in the region of 400 t/h (including muck fraction). Two-speed drive (HI for secondary crushing/granulation, LO for large lumps) lets the operator match rotor speed to feed hardness.
Crusher gap adjustment system
Hydraulic nut-runner adjusts the blow-bar-to-impact-plate gap without hand tools, selectable as automatic (input target gap), semi-automatic (specify plate travel), or manual (jog switches while watching plate position). Automatic mode completes a full gap reset in about five minutes and is used to compensate for plate wear rather than as a swap-in tool.
Vibrating grizzly feeder and hopper
Feed-in hopper feeds a vibrator-driven, two-stage grizzly bar deck that screens fines and muck ahead of the impactor, reducing wear and preventing oversize fines from reaching the rotor. The feeder is semi-automated and throttles back automatically if the crusher senses overload.
Magnetic separator
Factory option mounted over the primary discharge belt conveyor to pull rebar and tramp metal out of the crushed product stream. Listed as an option on the base machine rather than standard equipment.
Discharge and muck conveyors
A primary discharge belt conveyor carries finished product off the machine, while a separate muck discharge shooter with its own belt conveyor removes the fines/muck screened out by the grizzly feeder. Both are enclosed at the crusher discharge to help contain dust.
Dust suppression / water spray system
Enclosed discharge port and conveyor housings paired with a tank-and-pump water spray system, with nozzles at the crusher feed entrance and at the discharge exit, to knock down fine dust generated by impact crushing. Documented as standard equipment on the base machine rather than a bolt-on kit.
Maintenance crane (side-mounted, special product)
An electric-motor-driven hydraulic derrick/crane can be fitted to the machine side to lift blow bars and impact plates during crusher servicing, avoiding the need for a separate shop crane. It is offered as a special/optional product on this serial range (introduced partway through the S/N 1001-up run) and includes interlocks that prevent the crusher from cycling while the crane is rigged.
Crusher case slide (transport configuration)
The upper crusher casing slides down over the lower casing for road transport, cutting overall transport height versus the working position, then locks back up for crushing operation. This is a built-in transport arrangement rather than an attachment, aimed at keeping the unit within typical single-load transport height limits.
Closed-loop tie-in to a mobile screening plant
The discharge conveyor can feed an independently supplied tracked screening plant so oversize material is screened and recirculated back to the crusher, forming a simple crush-and-screen train on one site. The screen itself is a separate machine, not a Komatsu-supplied attachment, connected purely by conveyor arrangement.
Control panel and monitoring
A centralized, ground-level control panel groups engine-start, crushing, and inspection switches into separate blocks so the machine can be run and fault-diagnosed without the operator boarding it. A multi-panel display (derived from the PC200-series excavator monitor lineage) flags abnormal work-equipment conditions and stops the machine automatically with an audible alarm.
Engine and base power unit
Powered by the Komatsu SAA6D125E-2 diesel, the same base power unit used on the PC400-6 excavator, which keeps servicing familiar to technicians who already work on that excavator line. Engine was documented as meeting U.S. Tier II emissions at introduction; verify current-market emissions tier for a specific serial with your dealer.
All BR480RG-1-W1(S/N 1001-UP) assemblies by section
Every catalogued assembly group for the Komatsu BR480RG-1-W1(S/N 1001-UP). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Control System
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Frame Piping (Crusher Hose)
| 01***45 | Bolt, Mounting Cranking Motor | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
| 07***38 | O-Ring, (Without Emergency Steering) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Frame Piping (Feeder Hose)(#1001-1005)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***75 | Bolt - Tube Mounting | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Frame Piping (Feeder Hose)(#1006-)
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Frame Piping (Main Joint And Frame Side)(#1001-1005)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 9 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Frame Piping (Main Joint And Frame Side)(#1006-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Frame Piping (Sub Side And Zuricon Joint)(#1001-1005)
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Frame Piping (Sub Side And Zuricon Joint)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***65 | Bolt,(Used With Pin Puller) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Monitor Panel
| 78***10 | Bulb - 1.4 Watt | 2 |
| 78***02 | Monitor | 1 |
| 78***20 | Holder, Bulb | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Panel Wiring (Box)(#1001-1005)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***25 | Bolt,(Rear Attachment Less) | 6 |
| 01***16 | Screw | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Panel Wiring (Box)(#1006-)
| 01***16 | Bolt - Box Mounting | 2 |
| 01***25 | Bolt,(Rear Attachment Less) | 6 |
| 01***16 | Screw | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Panel Wiring (Clip)(#1001-1005)
| 01***12 | Bolt - Front Cover Mounting | 7 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 18 |
| 01***14 | Screw | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Panel Wiring (Clip)(#1006-)
| 01***12 | Bolt - Front Cover Mounting | 7 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 19 |
| 01***14 | Screw | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Panel Wiring (Controller)(#1001-1005)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***16 | Bolt - Box Mounting | 16 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Panel Wiring (Controller)(#1006-)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***16 | Bolt - Box Mounting | 18 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Panel Wiring (Wiring Harness)(#1001-1005)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Panel Wiring (Wiring Harness)(#1006-)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 9 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Travel Line (Soukou Rentu)(#1001-1005)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Travel Line (Soukou Rentu)(#1006-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Travel Lines (Ppc Shut)(#1001-1005)
| 01***75 | Bolt - Tube Mounting | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 02***05 | Hose | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Travel Lines (Ppc Shut)(#1006-)
| 01***75 | Bolt - Tube Mounting | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
| 02***05 | Hose | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Work Line (Drain Block And Main Valve Cnt)(#1001-1005)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 02***A3 | Hose | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Work Line (Drain Block And Main Valve Cnt)(#1006-)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
| 02***03 | Hose | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Work Line (Hose Clip)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***65 | Bolt,(Used With Pin Puller) | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 7 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Work Line (Hose Clip)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Work Line (Main Ppc)(#1001-1005)
| 02***05 | Hose | 1 |
| 02***06 | Hose | 3 |
| 02***07 | Hose | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Work Line (Main Ppc)(#1006-)
| 02***05 | Hose | 1 |
| 02***06 | Hose | 3 |
| 02***07 | Hose | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Work Line (P.T.G And Main Ppc)(#1001-1005)
| 02***04 | Hose | 1 |
| 02***06 | Hose | 1 |
| 02***10 | Hose | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Ppc Work Line (P.T.G And Main Ppc)(#1006-)
| 02***06 | Hose | 1 |
| 02***10 | Hose | 1 |
| 02***11 | Hose,1100mm | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Radio Control And Beacon Lamp (For U.S.A.)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Travel Control Lever (Level)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***14 | Screw | 3 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Travel Control Lever (Level)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***14 | Screw | 3 |
| 01***05 | Nut,(For Air Conditioner Less), Nut | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Travel Control Lever (Travel Lever)(#1001-1005)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Control System : Travel Control Lever (Travel Lever)(#1006-)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
Cooling System
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Cooling System : Cooling (After Cooler Piping)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 7 |
| 01***09 | Nut,(For Japan) | 8 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Cooling System : Cooling (Drain)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Cooling System : Cooling (Guard)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
| 20***20 | Guard | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Cooling System : Cooling (Radiator And Oil Cooler)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 32 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Cooling System : Cooling (Radiator Mounting And Sheet)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Cooling System : Cooling (Radiator Piping)(#1001-1005)
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Cooling System : Cooling (Radiator Piping)(#1006-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Cooling System : Fan Guard
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
| 20***30 | Cover | 1 |
Electrical System
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Battery
| 01***32 | Washer,(Not Used With Emergency Str.) | 2 |
| 08***00 | Terminal? (+),(10l) (Not Shown) | 2 |
| 08***01 | Terminal? (-),(20l) (Not Shown) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Battery Harness)
| 01***30 | Bolt - M8 X 30lg | 2 |
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 1 |
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Beacon Lamp)(#1001-1005)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Beacon Lamp)(#1006-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Control Panel)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***16 | Screw, Mount Parking Lights | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Control Panel)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***14 | Screw | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Crusher Harness) (Left Side)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 6 |
| 04***12 | Clip, Hose | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Crusher Harness) (Left Side)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 23 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 24 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Crusher Harness) (Right Side)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 04***12 | Clamp | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Crusher Harness) (Right Side)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 20 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 20 |
| 04***12 | Clamp | 12 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Engine Harness)
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Hopper Harness) (Harness And Emergency Stop Switch? L.H.)(#1001-1005)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 23 |
| 01***20 | Screw | 16 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Hopper Harness) (Harness And Emergency Stop Switch? L.H.)(#1006-)
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***30 | Bolt,(With Body Positioner) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 23 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Hopper Harness) (Rear Travel Alarm And Emergency Stop Switch? R.H.)(#1001-1005)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Hopper Harness) (Rear Travel Alarm And Emergency Stop Switch? R.H.)(#1006-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Main Harness) (Emergency Stop Switch? L.H.)(#1001-1005)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 17 |
| 01***20 | Screw | 16 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Main Harness) (Emergency Stop Switch? L.H.)(#1006-)
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 17 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Main Harness) (Front Travel Alarm)(#1001-1005)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
| 01***20 | Bolt,(For Mono Lever Steering) | 5 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Main Harness) (Front Travel Alarm)(#1006-)
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Main Harness) (Harness And Clip)(#1001-1005)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 33 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 5 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Main Harness) (Harness And Clip)(#1006-)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 37 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Valve Harness) (Harness)(#1001-1005)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 17 |
| 01***32 | Washer,(With Auto Emergency Steering) | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Valve Harness) (Harness)(#1006-)
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Valve Harness) (Sensor)(#1001-1005)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Electrical System (Valve Harness) (Sensor)(#1006-)
| 01***65 | Bolt - Return Line And Suction Linehose Clamps | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***32 | Washer,(With Auto Emergency Steering) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Electrical System : Horn
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***23 | Washer, Wiring Harness Mounting Bracket | 8 |
| 08***00 | Horn,High | 2 |
Engine Related Parts
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Engine Related Parts : Air Cleaner Connection(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 7 |
| 01***50 | Bolt,For Weight Adjusting Bolt | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 7 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Engine Related Parts : Air Clearner Conection(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 5 |
| 04***12 | Clamp | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Engine Related Parts : Damper
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
| 20***11 | Disc | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Engine Related Parts : Engine Mounting(#1001-1005)
| 01***40 | Bolt (Op) | 2 |
| 01***90 | Capscrew | 6 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Engine Related Parts : Engine Mounting(#1006-)
| 01***40 | Bolt (Op) | 2 |
| 01***90 | Capscrew | 6 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Engine Related Parts : Fuel Control
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***30 | Bolt,(With Body Positioner) | 1 |
Fuel Tank And Related Parts
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Fuel Tank And Related Parts : Fuel Lines
| 01***20 | Bolt,(For Mono Lever Steering) | 1 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***60 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Fuel Tank And Related Parts : Fuel Tank(#1001-1005)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***35 | Bolt,(With Rops) | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Fuel Tank And Related Parts : Fuel Tank(#1006-)
| 01***12 | Bolt - Front Cover Mounting | 4 |
| 01***30 | Bolt - Pin Mounting | 6 |
| 01***23 | Washer,(With Auto Emergency Steering) | 4 |
Guard
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Battery Box(#1001-1005)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 11 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Battery Box(#1006-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 9 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Cover (R.H. Side)(#1001-1005)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 6 |
| 01***50 | Bolt,(Spark Arrester Spec.) | 2 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Cover (R.H. Side)(#1006-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 8 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 28 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Frame (Machine Cab)(#1001-1005)
| 01***30 | Bolt,(Not Used When Towing Winch) | 14 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 3 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 15 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Frame (Machine Cab)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 14 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 5 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Hand Rail(#1001-1005)
| 01***30 | Bolt,(Not Used When Towing Winch) | 14 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***10 | Nut,(Without Air Conditioner) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Hand Rail(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 14 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 8 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Hood
| 01***30 | Bolt,(Not Used When Towing Winch) | 18 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***13 | Nut,(For Adjustable Rod) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : L.H.Side Door (Machine Cab)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 24 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Mirror
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***09 | Nut,(For Japan) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Partition (Cover)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 25 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Partition (Cover)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 1 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 25 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Partition (Engine Cover)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 9 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 8 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : R.H.Side Door (Machine Cab)
| 01***12 | Bolt - Front Cover Mounting | 2 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Rear Cover
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***45 | Bolt, Mounting Cranking Motor | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Side Cover
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Side Step(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 23 |
| 01***30 | Bolt - Pin Mounting | 16 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Side Step(#1006-)
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Under Cover(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 37 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 43 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Under Cover(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 48 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 32 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 54 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Guard : Upper Cover
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***30 | Bolt,(With Body Positioner) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
Hydraulic System And Piping
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Conveyor Lines (Accessory Line)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Screw | 8 |
| 01***45 | Screw | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Conveyor Lines (Accessory Line)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***25 | Screw | 8 |
| 01***45 | Screw | 12 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Conveyor Lines (Conveyor Line)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***50 | Bolt | 8 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 10 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Conveyor Lines (Conveyor Line)(#1006-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***50 | Bolt | 8 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Conveyor Lines (Option Line)
| 01***50 | Bolt | 16 |
| 02***25 | Elbow | 2 |
| 02***26 | Elbow | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Crusher Lines
| 01***32 | Washer, (Without Emergency Steering) | 20 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 6 |
| 07***38 | O-Ring, (Without Emergency Steering) | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Delivery Line
| 01***35 | Capscrew | 8 |
| 01***32 | Washer,(With Auto Emergency Steering) | 8 |
| 01***32 | Washer, (Without Emergency Steering) | 24 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Drain Lines(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Drain Lines(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***70 | Bolt - Accumulator Mounting Bracket | 2 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Feeder Lines
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***32 | O-Ring,(See Fig. H0312-01a0-4) | 4 |
| 07***14 | Hose Assembly | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Hydraulic Tank (Filter Tube And Drain)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***90 | Bolt,For Weight Adjusting Bolt | 2 |
| 01***30 | Bolt - Pin Mounting | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Hydraulic Tank (Tank)(#1001-1005)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Hydraulic Tank (Tank)(#1006-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Ls Lines (Ls Line And Self Reduce Line 2g)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Ls Lines (Ls Line And Self Reduce Line 2g)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
| 01***65 | Bolt,(Used With Pin Puller) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Ls Lines (Pump Elbow And Self Reduce Line 1g)(#1001-1005)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Ls Lines (Pump Elbow And Self Reduce Line 1g)(#1006-)
| 01***60 | Bolt,(F4320-52a0 -5- ) | 2 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Main Pump
| 01***40 | Bolt,For Weight Adjusting Bolt | 12 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 12 |
| 07***23 | O-Ring,(F4350-65a0 -16 ) | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Main Valve(#1001-1005)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***50 | Bolt,(For D60pl) | 3 |
| 01***60 | Capscrew | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Main Valve(#1006-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***45 | Bolt,(For 60ton Dump Body) | 6 |
| 01***50 | Bolt,(For D60pl) | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Oil Cooler Lines
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 14 |
| 01***85 | Bolt,(Used With Pin Puller) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Ppc Valve(#1006-)
| 01***95 | Bolt | 2 |
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Return Lines
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 2 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***75 | Bolt - Tube Mounting | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Solenoid Valve(#1001-1005)
| 01***35 | Bolt,(F4320-52a0 -5 ) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***32 | Washer,(With Auto Emergency Steering) | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Solenoid Valve(#1006-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Suction Line
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
| 01***55 | Bolt - Mount Cage To Transmission Case | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 8 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Travel Lines(#1001-1005)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***25 | O-Ring,(See Fig. H0311-01a0-30) | 4 |
| 07***23 | O-Ring,(For 2nd Travel Speed) (Op) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Travel Lines(#1006-)
| 01***32 | Washer, (Without Emergency Steering) | 16 |
| 07***49 | Flange, Split - Divider Valve End | 8 |
| 07***35 | Bolt, Split Flange - Torque Converter End | 16 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (H/D) (Pump And Filter) (1/2)(#1006-)
| 01***10 | Bolt,(With Auto Emergency Steering) | 2 |
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 8 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (H/D) (Pump And Filter) (2/2)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 4 |
| 01***09 | Nut,(For Japan) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (Hose) (1/2)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***09 | Nut,(For Japan) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (Hose) (1/2)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***09 | Nut,(For Japan) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (Hose) (2/2)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 9 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 9 |
| 04***12 | Clamp | 9 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (Hose) (2/2)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***09 | Nut,(For Japan) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (Pump And Filter)(#1001-1005)
| 01***10 | Bolt,(With Auto Emergency Steering) | 3 |
| 01***16 | Bolt - Box Mounting | 2 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (Pump And Filter)(#1006-)
| 01***10 | Bolt,(With Auto Emergency Steering) | 1 |
| 01***16 | Bolt - Box Mounting | 4 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (Tank And Bracket)(#1001-1005)
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 16 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 16 |
| 82***20 | Bracket | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Hydraulic System And Piping : Water Tank And Pump (Tank And Bracket)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 6 |
| 01***45 | Bolt,(For 60ton Dump Body) | 16 |
Travel And Lower Piping
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Travel And Lower Piping : Travel Lines
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 6 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 2 |
Under Carriage
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Under Carriage : Carrier Roller
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 3 |
| 01***85 | Screw | 16 |
| 01***45 | Washer,(For Quick Shift) (Mitsubishi) | 16 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Under Carriage : Front Idler
| 07***60 | O-Ring,(F4350-59a0 -6 ) | 2 |
| 07***24 | Plug | 1 |
| 20***90 | Pin,Dowel | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Under Carriage : Idler Cushion
| 01***55 | Bolt,(Not Used For Chip Dozer) | 8 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Under Carriage : Track Frame (Final Drive)
| 01***60 | Capscrew | 36 |
| 01***20 | Bolt,(For Mono Lever Steering) | 2 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 8 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Under Carriage : Track Frame (Frame And Track Roller)
| 01***50 | Bolt - Differential Carrier | 16 |
| 01***45 | Washer,(Without R.O.P.S.) | 72 |
| 01***60 | Flat Washer - M20 (Hardened) | 16 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Under Carriage : Track Shoe (Triple Grouser With Hole)
| 13***21 | Nut (Y0320-K4) | 392 |
| 20***41 | Bushing? Regular,Regular | 94 |
| 20***71 | Bushing? Master,Master | 4 |
Work Equipment
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Conveyor Cover) (M/Sparator Less)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 40 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 10 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 50 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Cover Guard And Belt)(#1001-1008)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 55 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Cover Guard And Belt)(#1009-1011)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 55 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Cover Guard And Belt)(#1012-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 55 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 28 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Frame)(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 45 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
| 01***65 | Capscrew - M16 X 2.00 X 90 | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Frame)(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 45 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 16 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Impact Bar And Scraper)
| 01***40 | Bolt,For Weight Adjusting Bolt | 8 |
| 01***40 | Bolt,(For Slag Handling) (For Usa) | 4 |
| 01***00 | Bolt,For Weight Adjusting Bolt | 24 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Motor)
| 01***55 | Bolt,(Not Used For Chip Dozer) | 12 |
| 01***30 | Bolt,For Weight Adjusting Bolt | 13 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 13 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Piping)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 7 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Plug)
| 02***12 | O-Ring,(F2370-57a0 -49 ) | 1 |
| 02***18 | O-Ring,(F5350-63a0 -17 ) | 2 |
| 07***22 | Plug | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Pully)
| 01***16 | Bolt - Box Mounting | 4 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Roller) (1/2)(#1001-1005)
| 01***16 | Bolt - Box Mounting | 30 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 28 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Roller) (1/2)(#1006-)
| 01***16 | Bolt - Box Mounting | 30 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 40 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Roller) (2/2)
| 01***16 | Bolt - Box Mounting | 6 |
| 01***16 | Bolt - Seat And Tether Belt Mounting | 12 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Side Skirt) (1/2)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 54 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 58 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Side Skirt) (2/2)(#1001-1011)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 62 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor (Side Skirt) (2/2)(#1012-)
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 5 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 34 |
| 01***40 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Conveyor Bracket
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 3 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Bearing And Swing Shaft)
| 82***70 | Rod | 1 |
| 82***80 | Coller | 1 |
| 82***40 | Cover | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Bolt?Nut And Washer)(#1001-1005)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Bolt?Nut And Washer)(#1006-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 8 |
| 01***25 | Bolt,(Rear Attachment Less) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Case Pin And Cylinder)
| 82***10 | Pulley | 1 |
| 82***30 | Casing,Lower | 1 |
| 82***31 | Casing,Lower | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Chain And Rubber)(#1001-1009)
| 82***30 | Rod | 1 |
| 82***40 | Rod | 1 |
| 82***50 | Plate | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Chain And Rubber)(#1010-)
| 82***30 | Rod | 2 |
| 82***50 | Plate | 1 |
| 82***70 | Coller | 27 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Crusher Mounting Parts)
| 01***75 | Bolt (Kit) | 4 |
| 01***40 | Bolt,L.H | 4 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 8 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Door)
| 82***90 | Pin | 3 |
| 82***10 | Bolt | 4 |
| 82***20 | Nut | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Impact Plate)
| 82***60 | Guide | 6 |
| 82***70 | Washer | 6 |
| 82***80 | Bolt | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Liner)(#1001-1005)
| 82***20 | Liner | 14 |
| 82***30 | Liner | 12 |
| 82***40 | Liner | 10 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Liner)(#1006-)
| 82***40 | Liner | 6 |
| 82***40 | Liner | 2 |
| 82***10 | Liner | 10 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Nut Driver)(#1001-1005)
| 01***16 | Bolt - Seat And Tether Belt Mounting | 8 |
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 40 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Nut Driver)(#1006-)
| 01***20 | Bolt, Wiring Harness Mounting Bracket | 34 |
| 01***25 | Bolt,(Rear Attachment Less) | 6 |
| 01***65 | Capscrew - M16 X 2.00 X 90 | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Rod Cover)(#1006-)
| 01***26 | Washer,Spring | 4 |
| 01***45 | Washer,(For Travel Motor) (Not Show) | 4 |
| 04***28 | Pin,Cotter (Kit), Cotter Pin; Was 04050-14028 | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Rog And Linkage)(#1001-1005)
| 82***10 | Bolt | 1 |
| 82***20 | Case | 1 |
| 82***30 | Nut | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Rog And Linkage)(#1006-)
| 82***11 | Bolt | 1 |
| 82***20 | Case | 1 |
| 82***30 | Nut | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Rotor)(#1001-1005)
| 82***20 | Bar | 4 |
| 82***10 | Guide | 12 |
| 82***20 | Block | 12 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Rotor)(#1006-)
| 82***20 | Bar | 4 |
| 82***91 | Disk | 1 |
| 82***10 | Shaft | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher (Swing Arm)
| 82***50 | Liner | 3 |
| 82***60 | Liner | 6 |
| 82***70 | Liner | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher Guard(#1001-1005)
| 01***30 | Bolt,(Not Used When Towing Winch) | 19 |
| 01***32 | Washer,(Not Used With Emergency Str.) | 19 |
| 82***10 | Guard | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher Guard(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 8 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 18 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 10 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher Liner(#1001-1005)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 16 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***35 | Bolt,(With Rops) | 16 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher Liner(#1006-)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 13 |
| 01***35 | Bolt, Mount Ground Driven Steering Pump | 4 |
| 01***35 | Bolt,(With Rops) | 16 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher Motor
| 01***60 | Bolt | 4 |
| 01***80 | Bolt | 8 |
| 01***45 | Washer,(Without R.O.P.S.) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher Motor Mounting Parts (Bearing Housing)
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 2 |
| 01***45 | Bolt,(For 60ton Dump Body) | 4 |
| 01***80 | Screw | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Crusher Motor Mounting Parts (Housing Bracket)
| 01***40 | Bolt,For Weight Adjusting Bolt | 1 |
| 01***50 | Bolt,(For D60pl) | 10 |
| 01***60 | Capscrew | 6 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Hopper
| 01***80 | Bolt | 16 |
| 17***70 | Spacer | 16 |
| 82***10 | Hopper | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Frame)(#1001-1005)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Frame)(#1006-)
| 01***20 | Bolt,(For Mono Lever Steering) | 6 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***80 | Bolt,For Weight Adjusting Bolt | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Head Pulley)
| 01***16 | Bolt, Battery To Frame Ground Wire Attaching | 4 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 2 |
| 01***35 | Bolt,(F4320-52a0 -5 ) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Motor?Hose?Emergency Switch? Sensor And Belt)(#1001-1005)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 11 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 1 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Motor?Hose?Emergency Switch? Sensor And Belt)(#1006-)
| 01***20 | Bolt,(For Mono Lever Steering) | 4 |
| 01***20 | Bolt,(Without Rops Guard? Canopy) | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 3 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Roller)
| 01***10 | Bolt,(With Auto Emergency Steering) | 27 |
| 01***20 | Bolt,(For Mono Lever Steering) | 8 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 46 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Scraper And Guard)
| 01***20 | Bolt,(For Mono Lever Steering) | 14 |
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 10 |
| 01***25 | Bolt,(Without Rops Guard? Canopy) | 12 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Skirt)(#1001-1005)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 40 |
| 01***30 | Bolt,(With Body Positioner) | 40 |
| 01***32 | Washer,(With Auto Emergency Steering) | 80 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Skirt)(#1006-)
| 01***25 | Bolt,(For Canvas Canopy?Head Guard) | 40 |
| 01***30 | Bolt,(With Body Positioner) | 40 |
| 01***32 | Washer,(With Auto Emergency Steering) | 80 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Side Conveyor (Tail Pulley)
| 01***25 | Capscrew | 6 |
| 01***25 | Bolt,(Rear Attachment Less) | 4 |
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Sprinkler(#1001-1005)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***09 | Nut, Lock | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
Komatsu : Br480rg-1-W1(S/N 1001-Up) : Work Equipment : Sprinkler(#1006-)
| 01***30 | Bolt,(Not Used When Towing Winch) | 2 |
| 01***08 | Nut,(For Canvas Canopy?Head Guard) | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 4 |
BR480RG-1-W1(S/N 1001-UP) serial number reference
The machine identification (PIN) plate on this mobile crusher is mounted on the main chassis frame; the engine carries its own separate serial plate on the block. The plate shows the full model code (BR480RG-1-W1) followed by the running serial number, starting at 1001 for this range - there is no separate lettered chassis sub-prefix block like on Komatsu excavators. When ordering parts, some option assemblies (for example an optional derrick crane) are keyed to a later serial cutoff within the same overall range, so check the parts book's applicable-serial column for that specific assembly rather than assuming full-range coverage.
| Prefix | Identifies | Notes |
|---|---|---|
| 1001-UP | BR480RG-1-W1 (Overseas Version) | Continuous serial run from 1001 up covers this variant as a single parts-catalog entry; no further lettered sub-prefixes are documented within the range. Fitted with the Komatsu SAA6D125E-2 series engine (six-cylinder, turbocharged, aftercooled), rated around 228 kW (306 hp). Some individual option assemblies, such as an optional derrick-crane cylinder, apply only from a later point within the run rather than from 1001, so check the applicable-serial notation for optional equipment before ordering. |
Frequently asked questions
What engine powers the Komatsu BR480RG-1-W1 (S/N 1001-UP)?
A Komatsu SAA6D125E-2 turbocharged, aftercooled diesel rated at approximately 228 kW (306 hp).
What is the operating weight of the BR480RG-1-W1 (S/N 1001-UP)?
Approximately 38.3 tonnes (about 84,440 lb). Some listings round this to a 40-tonne class; exact figure varies slightly by configuration and undercarriage.
What replaced the Komatsu BR480RG-1-W1 (S/N 1001-UP)?
No single confirmed successor model is documented for this exact serial range. Komatsu continued its Galeo mobile crusher lineup with later-generation impact crushers; verify the specific replacement model with a Komatsu dealer for your region.
What BR480RG-1-W1(S/N 1001-UP) owners discuss
What do owners and mechanics say about the engine on this crusher?
The SAA6D125E-2 series turbo diesel fitted to this crusher (rated near 228 kW / 306 hp) is generally described as sturdy, but a recurring complaint on 6D125-family engines in this duty cycle is white smoke and diesel-diluted crankcase oil right after startup, usually traced to a leaking or worn fuel injector washing a cylinder rather than a design flaw. Ring and liner wear can also show up early if fuel quality is poor or oil-change intervals get stretched, since this engine runs long stationary hours under load at a crush site. A compression test or cylinder leak-down test is the standard way operators confirm blow-by before condemning an injector. Have your dealer verify injector condition and compression on any unit showing this symptom before committing to a top-end rebuild.
How does the crusher's hydraulic system behave, and what should I watch for?
This crusher runs Komatsu's HydrauMind closed-center, load-sensing hydraulic control, which automatically matches pump output to whichever function is working (crusher drive, vibrating grizzly feeder, or discharge conveyor) instead of running pumps at full output all the time. Operators report the system is designed to automatically slow the grizzly feeder when it senses the crushing chamber loading up, which is the main built-in defense against jamming on oversized or rebar-laden debris. Because flow is shared across several load-sensing and pressure-compensated valves, a single sticking or worn valve tends to show up as a sluggish feeder or conveyor elsewhere in the circuit, so hydraulic complaints on this crusher family are usually chased valve-by-valve rather than assumed to be a pump failure. Exact flow and pressure figures vary by configuration and production date, so confirm specifics against the machine's own data plate rather than a sister model.
Are there known electrical or sensor issues on this crusher?
The feeder and discharge-conveyor circuits use overload and emergency-stop sensors to halt the belt if they detect a jam, foreign object, or belt puncture. The most common complaint tied to this system is a sensor that fails to trip, or a belt that keeps running when it should stop. In field reports the root cause is almost always wiring or connector corrosion at the sensor, not the sensor unit itself, since these live in a wet, dusty crushing environment. Owners recommend inspecting sensor wiring harnesses and connectors as routine maintenance rather than waiting for a fault to appear. Because this circuit is a safety interlock, have your dealer verify sensor function and wiring integrity rather than bypassing a nuisance trip.
What undercarriage or track wear patterns are typical for this machine?
This crusher shares its track drive and undercarriage design with Komatsu's excavator line, running at low travel speed since it only repositions around a site instead of covering distance. Standard excavator-type wear applies: a loose track accelerates pad, link, and sprocket wear, so track tension needs regular checking. Rubber pads take most of the shock loading and wear down before the steel components beneath them do, on machines fitted with them. Because the whole unit sits and vibrates in place while crushing, packed fines and dirt building up around the rollers and idlers is a more common complaint here than on a traveling excavator, so daily cleanout around the undercarriage is called out repeatedly as preventive maintenance.
What wear patterns show up on the crushing rotor and blow bars?
Consistent with impact crushers generally, the leading edge of the rotor and the blow bars take the brunt of wear, and uneven wear across the bars usually points to material not being fed centered on the rotor rather than a defective bar. Operators flip or rotate blow bars to extend service life before full replacement, and stress keeping bars matched in weight so the rotor stays balanced, since an out-of-balance rotor is repeatedly named as the fast track to a bearing failure. Because a bearing failure at operating speed is both a safety event and a major downtime event, have your dealer verify rotor balance and bearing condition at every blow bar change rather than judging it by eye.
How do you catch a failing rotor bearing before it becomes a bigger problem?
Inspectors and used-equipment buyers run the crusher with the rotor engaged for about an hour, then check rotor bearing temperature with an infrared thermometer; a reading in roughly the 85-95 degrees C (185-203 degrees F) range is treated as the threshold pointing to a bearing on its way out, not normal running heat. Unusual bearing rumble or noise at startup gets the same treatment, as a reason to stop and inspect rather than keep running. Because a seized rotor bearing at operating speed can shed a blow bar or damage the crushing chamber housing, have your dealer verify bearing temperature and noise findings before the machine goes back into full production.
What should I check when buying a used BR480RG-1-W1 (S/N 1001-up)?
Buyers consistently check the following on this crusher: rotor and blow bar wear, since uneven wear signals a feed-alignment problem rather than just age; a full function test with the rotor engaged for roughly an hour while monitoring rotor bearing temperature and listening for bearing noise; hydraulic hoses, cylinders, and motor seals for leaks or weeping, especially around the feeder and conveyor drives; the undercarriage for track tension, pad wear, and packed debris in the rollers and idlers; the control panel for stored fault codes or warning lights, since the feeder and conveyor overload sensors are a known trouble spot tied to wiring corrosion; engine startup behavior for excess white smoke or oil that smells of diesel, a known 6D125-family blow-by symptom; and maintenance records confirming service intervals were kept, since poor fuel quality and stretched intervals are the recurring driver of early ring and liner wear on this engine family. Have your dealer verify any borderline finding, especially bearing temperature and hydraulic pressure readings, before finalizing a purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BR480RG-1-W1(S/N 1001-UP) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.