Komatsutruckselectric (930e)
Komatsu AFE52-A(930E-3 S/N A30304 CODELCO)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu AFE52-A (930E-3, S/N A30304, CODELCO) is an ultra-class, rigid-frame mining haul truck built around a diesel-electric AC drive powertrain. Standard power comes from a Komatsu SSDA16V160, a turbocharged 16-cylinder four-stroke diesel rated near 2,014 kW (2,700 hp) gross, feeding a traction alternator that drives one AC wheel motor at each rear wheel. Empty operating weight runs about 210 t (463,383 lb), with a 290 t (320 US ton) rated payload that pushes gross vehicle weight to roughly 502 t (1,106,663 lb) loaded. Komatsu introduced the 930E-3 platform in December 2003 as the successor to the 930E-2 and 930E-2SE, and this AFE52-A unit was part of the opening production block of the 930E-3 program, built to Komatsu's AFE52 arrangement for a CODELCO fleet order in Chile.
Where the higher-output 930E-2SE and 930E-3SE variants used the larger V18 SSDA18V170 for extra power or high-altitude duty, this AFE52-A unit is a standard-power 930E-3 built around the smaller-displacement V16 SSDA16V160, with a mechanically similar Cummins QSK60 offered as a factory alternate on some trucks of this platform. Komatsu carried the AC-drive electronics, multi-piece Smart Rim wheel-end design, and pressurized electrical cabinet forward from the -2 series while refining control software and cooling through the -3 program, then handed the payload class to the 930E-4 (which listed the Cummins QSK60 as an alternate engine alongside the Komatsu unit) and later the 930E-5 and 930E-5SE. Two decades on, this early CODELCO-order 930E-3 is well past its original design life and now cycles through the secondary mining and parts market: its AC wheel motors, traction alternator, suspension struts, and SSDA16V160/QSK60 driveline components stay in demand for rebuild programs on copper-belt fleets still running this generation of Komatsu ultra-class truck.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu AFE52-A(930E-3 S/N A30304 CODELCO) specifications
Engine
| Engine model | Komatsu SSDA16V160, V-16, four-stroke diesel, turbocharged and aftercooled |
| Gross power | 2014 kW (2700 hp) at 1800-1900 rpm |
| Net power (flywheel, ISO 9249 / SAE J1349) | 1902-1930 kW (2550-2588 hp) |
| Displacement | 60.0 L (3,661.5 cu in) |
| Cylinders | 16, V-configuration |
| Emissions tier | U.S. EPA Tier 2 |
Weights
| Operating weight (empty) | 210,187 kg (463,383 lb) |
| Payload (rated) | 290 t (320 US tons) |
| Gross vehicle weight (GVW) | 502,000 kg (1,106,663 lb) |
Dimensions
| Transport length (overall) | 15.60 m (51 ft 2 in) |
| Transport height (overall) | 7.37 m (24 ft 2 in) |
| Loading height (empty body) | 6.37 m (20 ft 11 in) |
| Width over tires (front / rear) | 7.52 m / 8.33 m (24 ft 8 in / 27 ft 4 in) |
| Wheelbase | 6.35-6.65 m (20 ft 10 in - 21 ft 10 in), varies by source |
| Turning radius | 15.20 m (49 ft 10 in) |
Performance
| Maximum travel speed | 64.5 km/h (40.1 mph) |
| Standard tire size | 53/80R63 |
Service capacities (summary)
| Fuel tank | 4,542 L (1,199.9 US gal) |
| Hydraulic tank | 946 L (250 US gal) |
| Engine oil (crankcase) | 280 L (74 US gal) |
| Cooling system | 594 L (157 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AFE52-A(930E-3 S/N A30304 CODELCO) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase, with lube oil filters | 280 L (74 US gal) | The OMM does not name a house-brand oil for this point; it directs the operator to the installed engine's own service manual. This truck order carried a V16 diesel (Cummins QSK60, Detroit Diesel MTU16V4000, or Komatsu SSDA16V160 depending on build), so grade follows that engine builder's chart: heavy-duty diesel engine oil, API CI-4/CH-4 class, viscosity stepped for ambient temperature (heavier grades such as SAE 15W-40 for warm climates, lighter multigrades for cold starts). |
| Cooling system | 594 L (157 US gal) | Coolant type and mix ratio are set by the installed engine manufacturer, not by a Komatsu house brand on this chassis. Use a low-silicate, heavy-duty ethylene-glycol antifreeze/coolant at the ratio the engine builder specifies, with the coolant conditioner/additive package that engine calls for, checked on a regular test interval. |
| Fuel tank | 4542 L (1200 US gal) | Diesel fuel grade per the installed engine manufacturer's specification. Drain water and sediment from the fuel filters/separators at each daily inspection. |
| Hydraulic system, total (tank, lines, cylinders) | 1325 L (350 US gal) | Type C-4 hydraulic oil only (an Allison C-4 automatic-transmission-fluid-spec fluid, carried under Komatsu's own gear-oil line for this class of equipment). Any oil added to the system must be filtered through 3-micron filtration before it reaches the tank; do not overfill. |
| Hydraulic tank, drain-and-refill service | approx. 947 L (250 US gal) at scheduled tank drain and refill | Same Type C-4 hydraulic oil as the full system. Clean the inlet strainer at each refill, then cycle the dump body several times after startup to purge air and distribute oil before the level is rechecked at the sight gauges. |
| Wheel motor gearbox / final drive, each | 95 L (25 US gal) per wheel | OMM excerpts available for this range do not spell out a brand name at this point; service falls back to the truck's own lubrication chart and periodic oil sampling rather than a fixed call-out. Class of service is a heavy-duty gear lubricant; confirm the exact grade against the lube chart mounted on the truck or with a dealer before topping up. |
| Grease, automatic lubrication system | topped off at the reservoir; no fixed refill volume, servicing points via automatic metered injectors | Multi-purpose extreme-pressure NLGI-grade chassis grease, distributed by the automatic lube system to steering linkage, final-drive pivot pins, rear suspension, body hinge pins, hoist-cylinder pins and anti-sway-bar connections. A few manual points such as the operator-seat slide rails are greased by hand at scheduled intervals. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu AFE52-A(930E-3 S/N A30304 CODELCO) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the AFE52-A(930E-3 S/N A30304 CODELCO) beyond the schedule
Predictive Maintenance & Fluid Analysis
Run scheduled oil sampling on the SSDA16V160 crankcase, wheel motor gearboxes, and hydraulic tank on the 250/500/1000-hour cycle to catch contamination before it reaches a wheel motor or engine bearing. Megger-test propulsion cabling, traction alternator, and wheel motor windings periodically; rising leakage current shows up as a ground-fault trip before it strands the truck. Watch the DID event log for repeating sensor or overtemp codes between services, since a nuisance code often traces back to a cooling blower or filter issue rather than a failed component.
Corrective & Common Repairs
Most shop calls trace to filtration, not the driveline: clogged turbo pre-cleaners cause gradual power loss on the SSDA16V160, and dust intrusion through worn electrical-cabinet door seals or a weak pressurizer blower triggers nuisance control faults. Retarder grid blower motors need regular checks, since a weak blower shows up as grid overheating under sustained downhill retarding. Wet brake discs must be pre-soaked in brake oil before installation to avoid dry-start scoring. Suspension strut seal leaks and hydraulic hose replacement on the dump and steering circuits round out routine corrective work.
Overhaul & Rebuild Points
Plan an inframe overhaul of the SSDA16V160 once oil analysis and blow-by trends call for it; this is a low-stressed engine by mining-truck standards with a long time-between-overhaul reputation when cooling and fuel systems stay clean. Traction alternator, wheel motor bearings, and windings reach rebuild points on a similar horizon. Suspension struts are recharged and eventually rebuilt as a nitrogen-and-oil set rather than individually. Inspect main frame, cross members, strut seats, and dump-body mounting points for cracks or weld repairs at every major overhaul.
Seasonal & Environment Servicing
Built for CODELCO's Chilean copper operations, this truck runs at high Andean altitude with heavy airborne dust and wide day-night temperature swings. Verify turbocharger boost and derate settings against site elevation, and inspect turbo pre-cleaners more often where fine ore dust loads them fast. Keep electrical-cabinet door seals and the pressurizer blower in spec, since dust intrusion in these conditions is the leading cause of nuisance sensor faults. Check strut nitrogen-to-oil ratio and cold-start hydraulic and brake-oil viscosity for altitude and overnight temperature swings.
AFE52-A(930E-3 S/N A30304 CODELCO) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| BF4803 | Element, Fuel Separator | Fuel system service | Check fitment → |
| BF5467 | Filter, Air | Air intake service | Check fitment → |
| SM5084 | Decal, Cylinder Oil Filter | Lubrication service | Check fitment → |
| BF5252 | Holder, Internal Filter | Scheduled service item | Check fitment → |
| XA2242 | Holder, External Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AFE52-A(930E-3 S/N A30304 CODELCO) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CA111 | Engine controller internal fault (left or right bank on this V16 engine) | Internal hardware or software fault in one bank's engine control module | Cycle key power to reset the controller; if the code returns, have the affected bank's engine controller tested and replaced |
| CA115 | Primary and backup engine speed sensor failure | Failed or misaligned crank/cam speed sensor, or damaged sensor wiring and connector | Inspect speed sensor wiring, connectors, and mounting air gap; replace the sensor if it fails to read correctly |
| CA122/CA123 | Intake manifold (boost) pressure sensor signal out of range, high or low | Faulty boost pressure sensor, pinched or open sensor circuit, or a turbocharger/charge-air fault | Check sensor connector and wiring for damage, verify sensor supply voltage, replace the sensor if the reading stays out of range |
| CA144/CA145 | Coolant temperature sensor signal out of range, high or low | Failed coolant temperature sensor or an open/shorted sensor circuit | Check coolant level and sensor wiring, test sensor resistance against spec, replace the sensor if out of tolerance |
| CA441 | Battery or system voltage low | Weak or failing batteries, a charging alternator fault, or a loose/corroded battery cable connection | Test battery voltage and charging output, clean and tighten connections, replace the battery or alternator as needed |
| PSC 002 | High ground fault in the AC propulsion drive system (chassis leakage current above threshold) | Insulation breakdown in propulsion cabling, a traction motor, or a GTO/inverter power module | Truck is restricted to no power until cleared; have an electrical technician megger-test propulsion cabling and motors before returning to service |
| PSC 005 | Drive system component overtemperature (auxiliary phase control, inverter, alternator, GTO/diode module, or rectifier diode, per sub-code) | Restricted cooling airflow, a failed blower motor, high ambient or load conditions, or a failing power module | Truck is restricted to no propel; check drive system cooling blowers and filters, let the system cool, then inspect the specific overtemp component named by the sub-code |
| E3 - STOP ENGINE | DID status panel indicator for a critical fault requiring immediate engine shutdown | An underlying critical engine or system fault (low oil pressure, overtemp, etc.) tripped the stop condition | Stop the truck safely and shut down the engine, then check the DID panel event log for the specific triggering fault code |
| E4 - CHECK ENGINE | DID status panel indicator that an engine fault has been logged, non-critical | An active engine sensor or system fault logged by the engine controller | Access the DID panel event/fault log to identify the specific CA-code, then address per that code's cause |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AFE52-A(930E-3 S/N A30304 CODELCO) attachments & work tools
Dump body (tray)
All-welded steel flat-floor body with horizontal bolsters and a full canopy over the cab, sized for ultra-class rigid haulage. Heaped capacity is class-typical for the 930E-3 range; exact figure varies by body spec ordered, so verify against the unit's build sheet.
Rock ejectors
Front (eyebrow) and rear-wheel rock ejectors are standard body features. They deflect spilled rock away from the tires and frame during dumping and travel, standard across this truck class.
Body liner package
Optional wear/impact liner kits (steel plate or steel-elastomer composite) fit the floor, front, and side sheets for abrasive ore and blasted rock service typical of large open-pit copper operations. Liners add tare weight and are matched to material density and impact loading.
Tires and rims
Standard six-tire radial off-the-road configuration, class-typical size 53/80R63 on tubeless flange-type five-piece rims rated for high cold inflation pressure. Compound, ply, and tread selection are job-specific (TKPH/TMPH, haul-road grade, ambient conditions) and set by the dealer/tire engineer rather than a fixed factory kit.
ROPS/FOPS structure and cab guarding
The full-canopy dump body doubles as overhead rock/FOPS protection for the cab, and the main frame carries integral ROPS mounting points. Optional wire-mesh or screen guarding is available for windshield and cab glazing on routes with heavy rock-fall exposure.
Body mounting and hoist system
The dump body is not a swappable quick-coupler attachment; it is pinned and rubber-mounted to the main frame with a body tilt cable/prop for safe service access. Body raise/lower is via multi-stage hydraulic hoist cylinders sized for this truck class.
Braking and retarding configuration
Primary downhill control comes from electric dynamic (regenerative) retarding through the AC wheel-motor drive, backed by oil-cooled multiple-disc service brakes and spring-applied multiple-disc parking brakes. Retarder grid/blower sizing is matched to site grade and altitude, relevant for high-elevation Andean haul routes.
Mud flaps, lighting, and accessory kits
Bolt-on mud flap kits, work-light packages, and back-up alarm/vision accessories are common dealer- or factory-installed options on this truck class, fitted to individual site safety specifications rather than as a universal standard fitment.
All AFE52-A(930E-3 S/N A30304 CODELCO) assemblies by section
Every catalogued assembly group for the Komatsu AFE52-A(930E-3 S/N A30304 CODELCO). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Alternator Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Alternator Group : Alternator - Brush Holder Assm (Vj1024)
| VE***25 | Bolt, Hex Head - 5/16"-18, 1 1/4" Long | 1 |
| VS***23 | Washer, Brass - 11/16" Od | 1 |
| VE***26 | Nut, Hex - 5/16"-18 | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Alternator Group : Alternator - Engine Mount
| BF***83 | Cable Assembly W/Jumper | 3 |
| BF***42 | Clamp Plate - 7 5/32" Long | 1 |
| BF***18 | Clamp Assembly (Two Piece) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Alternator Group : Alternator - Engine Mount - 1
| BF***60 | Brace, Coil (1) | 8 |
| BF***80 | Collector Ring Assembly (1) | 1 |
| GE***01 | Seal (1) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Alternator Group : Alternator - Field Connector (Brush Holder)
| GE***29 | Cable, Tertiary | 1 |
| GE***30 | Cable, Tertiary | 1 |
| VE***64 | Washer, Concave - 1/4" (Spring Steel) | 6 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Alternator Group : Alternator - Rotor Assm (Ge1078)
| BF***07 | Tape, Glass - 0.015" Thick, 1" Wide | 0 |
| BF***33 | Strip, Brazing | 16 |
| BF***05 | Tie Ring, Insulated - 15 1/2" Id | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Alternator Group : Alternator - Stator Assembly (Ge1166)
| GE***57 | Stator Frame & Core Assembly (1) | 1 |
| GE***67 | Stator Rewind Kit (1) | 1 |
| VE***53 | Bracket, Insulated (2) | 7 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Alternator Group : Alternator - Tertiary Connection
| BF***34 | Strip, Brazing | 3 |
| GE***69 | Marker, Cable (T20) | 1 |
| GE***68 | Marker, Cable (T19) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Alternator Group : Alternator/Blower Assembly (Pc1196)
| GE***13 | Cover | 1 |
| GE***96 | Nut - 3/8" - 16nc (Self Locking) | 6 |
| GE***96 | Plate, Front (Toward Rear Of Trucks) | 1 |
Body Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Body Group : Body & Body Pivot
| AK***22 | Note: (1) Included In Kit Ak3822 Body Pivot Pin Kit | 0 |
| ED***69 | Pin, Body Pivot (1) | 2 |
| EG***98 | Pad, Body | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Body Group : Body To Deck & Body Mud Flap Instl
| EH***86 | Plate, Mounting | 1 |
| EH***84 | Plate, Mounting | 1 |
| EH***81 | Strip, Back-Up | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Body Group : Deck Mud Flaps Installation
| EK***02 | Bar, Flat | 1 |
| EJ***56 | Retainer | 1 |
| EF***07 | Gusset | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Body Group : Rock Ejectors Installation
| C***8 | Pin, Cotter - 5/16" X 3.00 | 2 |
| EJ***67 | Arm, Ejector | 2 |
| EJ***64 | Mount, Ejector Arm - L.H | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Body Group : Side Mud Flap Installation
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 12 |
| C***7 | Flat Washer - 3/8" (Attaches With #31 Undercab) | 4 |
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 14 |
Cab Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Adjustable Hold-Down Assembly (Ej1087)
| EJ***68 | Plate W/ Holes | 1 |
| MM***11 | Capscrew - M10 X 1.50 X 60 | 1 |
| MM***18 | Capscrew - M12 X 1.75 X 30 (Zinc) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Air Conditioner Compressor Instl - 1
| BF***00 | Clutch, Plate W/ Hub | 1 |
| BF***48 | Locknut, Shaft | 1 |
| C***4 | Capscrew - 3/8" - 16nc X 1 1/2" (Cab Mounting) (1) | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Air Conditioning Piping & Installation
| C***3 | Capscrew - 1/2" - 13nc X 11 1/4" (2) | 8 |
| C***6 | Capscrew - 1/2" - 13nc X 1 3/4" | 4 |
| DA***57 | Flat Washer (Special) | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Cab Assembly (Ek2780)
| 11***C1 | Capscrew | 2 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 3 |
| ED***12 | Seal, Strip | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Cab Assembly - 1 (Ek2780)
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Console Installation
| 12***76 | Plug | 1 |
| 78***30 | Sensor,(Except -60?C Spec.) | 1 |
| DD***68 | Nut - #6 - 32nc | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : D.I.D. Panel Installation
| 01***23 | Washer, Wiring Harness Mounting Bracket | 4 |
| 01***32 | Washer,(With Auto Emergency Steering) | 6 |
| 09***12 | Cap,(With Auto Emergency Steering) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Door - L.H. (Sm5948)
| 20***R1 | Trim (Bulk) - 19 Inches | 0 |
| 31***R1 | Bolt, Hex. Flange Hd. - M6 | 12 |
| 31***R1 | Capscrew - M8 X 12 (Hinge To Door) | 10 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Door - R.H. (Sm5949)
| 20***R1 | Trim (Bulk) - 19 Inches | 0 |
| 31***R1 | Bolt, Hex. Flange Hd. - M6 | 12 |
| 31***R1 | Capscrew - M8 X 12 (Hinge To Door) | 10 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Heater Hose Piping
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Heater Piping & Installation
| EB***56 | Hose, Heater - Outlet | 1 |
| EC***93 | Seal, Neoprene Sponge | 2 |
| EC***94 | Seal, Neoprene Sponge | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Heater/Ac Drain Hose Installation
| HK***25 | Hose | 1 |
| HC***08 | Clamp, Worm Drive (At Heater) | 3 |
| KC***35 | Fitting, Pipe | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Heater/Air Conditioner Assembly - 1 (Pc1066)
| BF***32 | Valve, Block | 1 |
| BF***67 | Bushing, Snap - 3/16" | 2 |
| BF***60 | Converter | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Instrument Panel Assembly
| CC***03 | Clamp, Worm Drive | 4 |
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 2 |
| EJ***06 | Overlay, Lexan | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Operator Controls & Overhead Panel
| 11***C1 | Holder, Document | 1 |
| 31***R1 | Bolt, Hex. Flange Hd. - M6 | 10 |
| EK***17 | Floor Mat - Seat | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Operator'S Seat Assembly (Ej8295)
| LA***35 | Kit, Hardware | 1 |
| LA***38 | Kit, Hardware (1) | 1 |
| VE***35 | Kit, Air Lumbar | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Operator'S Seat Assembly - 1 (Ej8295)
| BF***13 | Kit, Seat Belt/Hardware | 1 |
| BF***14 | Kit, Tether | 1 |
| BF***26 | Handle, Slide | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Operator'S Seat Assembly - 2 (Ej8295)
| LA***45 | Frame, Seat | 1 |
| VE***70 | Kit, Side Plate | 1 |
| VE***69 | Kit, Torsion Bar | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Operator'S Seat Assembly - 3 (Ej8295)
| BF***42 | Kit, Tooth Plate | 1 |
| LA***51 | Lever, Rear | 1 |
| LA***47 | Spring, Tension | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Operator'S Seat Assembly - 4 (Ej8295)
| BF***88 | Hose, Plastic | 1 |
| VE***79 | (3) Included In Ve9079 Repair Kit | 1 |
| VE***61 | Seat Frame Assembly (See Following Three Pages) (2) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Operator'S Seat Assembly - 5 (Ej8295)
| BF***95 | (5) Also Included In Bf0695 Bumper Kit | 1 |
| BF***94 | Kit, Shock Absorber | 1 |
| BF***78 | (6) Also Included In Bf0478 Bumper Kit | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Operator'S Seat Installation
| EJ***95 | Seat Assembly (See Following Pages) (2) | 1 |
| EG***11 | Harness, Air Ride Seat | 1 |
| SC***74 | Lockwasher - 5/16" (6) | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Overhead Dash Module
| 31***R1 | Bolt, Hex. Flange Hd. - M6 | 6 |
| EK***27 | Panel, Overhead Dash | 1 |
| EK***54 | Harness, Warning Light | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Passenger Seat Installation
| 48***57 | Belt, Seat | 1 |
| PB***72 | Eyebolt (Included With Seat Belt) | 2 |
| PB***17 | Seat, Passenger | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cab Group : Windshield Wiper/Washer Installation
Control Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : A.F.S.E. Panel Cover Assembly (Ge1210)
| DF***44 | Lockwasher - #6, Zinc Pl | 4 |
| GE***16 | Base | 1 |
| GE***18 | Bracket | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : A.F.S.E. Panel Cover Assembly - 1 (Ge1210)
| DF***44 | Lockwasher - #6, Zinc Pl | 4 |
| GE***16 | Base | 1 |
| GE***21 | Gasket | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Contactor - Gf & Gfr (Ve1317)
| AK***60 | Flat Washer - 5/16" (Zinc Pl) | 8 |
| BF***90 | Armature Assembly | 1 |
| BF***91 | Core Flange - 2" Od | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Contactor Assembly - R.P. (Ge0647)
| C***0 | Nut, Hex (Grab Handle) | 1 |
| GE***25 | Cap, Pivot Spring | 3 |
| GE***49 | Armature Assembly | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Bottom Views)
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 0 |
| GE***73 | Panel Assembly (1)(2) | 2 |
| GE***97 | Bar, Bus | 3 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Contactor Box)
| BF***32 | Sensor, Thermistor - 100,000 Ohm | 1 |
| BF***04 | Shield, Insulated - 3 1/2" (1 Hole) | 4 |
| BF***31 | Panel, Ambient Air Temperature | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Front & Back View) (Pc1198)
| BF***88 | Washer, Plain - 1/2" | 2 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 4 |
| GE***37 | Front Cover Assembly | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Left Front)
| BF***08 | Shield, Glastic | 1 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 0 |
| GE***76 | Base Assembly | 3 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Left Inside Wall)
| BF***08 | Shield, Glastic | 1 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 0 |
| GE***57 | Panel Assembly (Vam) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Left Side)
| BF***95 | Gasket | 0 |
| GE***36 | Cover Assembly | 1 |
| GE***93 | Screw, Cover (Special) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Right Front)
| BF***22 | Capscrew - 5/16" - 18nc X 3" | 2 |
| BF***02 | Panel, Snubber Resistor | 6 |
| GE***63 | Bar, Bus | 24 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Right Inside Wall)
| GE***74 | Switch, Toggle | 2 |
| GE***78 | Module, 5-Led | 1 |
| GE***76 | Switch, Toggle | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Right Side And Front View)
| BF***88 | Washer, Plain - 1/2" | 4 |
| GE***38 | Left Cover Assembly | 1 |
| GE***43 | Cover, Air Duct | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Section Views)
| C***0 | Bolt, Hex Head - 3/8"-16, 3" Long | 2 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 0 |
| GE***72 | Bracket, Lem Mounting | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Control Cabinet (Top View)
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 0 |
| GE***01 | Insulator W/ Stud - 4 1/4" | 1 |
| GE***73 | Bracket, Mounting | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Panel - A.F.S.E. (Ge0858)
| BF***32 | Sensor, Thermistor - 100,000 Ohm | 0 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 0 |
| GE***14 | Rectifier | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Panel - A.F.S.E. - 1 (Ge0858)
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 0 |
| GE***14 | Rectifier | 1 |
| GE***12 | Rectifier | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Panel - Icp (Ge0856)
| BF***84 | Card, 17fb144 | 1 |
| GE***07 | Receptable - 9 Contacts | 2 |
| GE***06 | Connector - 104 Sockets | 6 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Panel - Icp - 1 (Ge0856)
| GE***05 | Connector - 210 Circuits | 10 |
| GE***00 | Hinge | 1 |
| GE***04 | Cover | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Position Sensor Interlock (Ve3530)
| BF***20 | Machine Screw - #6 - 32nc X 5/8" (Thread Cutting) | 5 |
| BF***74 | Cover | 1 |
| HE***25 | Washer - #6, Zinc Pl | 5 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Relay (Vg7043)
| SF***55 | Nut, Hex - #10 - 32nf (Zinc Pl) | 12 |
| VZ***58 | Flat Washer - #10 (Zinc Plated) | 12 |
| VS***55 | Base | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Control Group : Terminal Boards
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 2 |
| GE***93 | Board, Terminal (See Fig 64033) | 1 |
| PB***10 | Board, Terminal (See Fig 64033) | 1 |
Cooling System
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cooling System : Fan & Fan Drive
| 01***45 | Washer,(For Travel Motor) (Not Show) | 8 |
| BF***91 | Belt, Fan Drive | 1 |
| EH***54 | Spacer, Fan | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cooling System : Fan Guard Installation
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cooling System : Heat Exchanger (Pb9796)
| BF***71 | Capscrew - 1/2" - 13nc X 2 1/2" | 12 |
| BF***65 | Plug | 4 |
| BF***64 | Gasket | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cooling System : Radiator & Shroud Assembly (Pc1240)
| BF***49 | Coupling, Pipe - 2" | 2 |
| BF***53 | Hose, Overflow | 1 |
| BF***93 | Tubes | 626 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cooling System : Radiator Piping
| CD***07 | Clamp (Top & Bottom Connections) | 4 |
| C***0 | Plug, Pipe - 3/8" | 1 |
| EG***69 | Hose, Connector | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cooling System : Radiator Piping & Engine Mounting
| C***5 | Nut - 5/8" Unc (G5) | 4 |
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 8 |
| C***0 | Flat Washer - 5/8" | 12 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cooling System : Radiator Piping - 1
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 2 |
| CD***07 | Clamp (Top & Bottom Connections) | 2 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Cooling System : Radiator Support & Mounting
| C***7 | Capscrew - 1" - 8nc X 2-1/2" | 2 |
| C***2 | Nut (Special) | 6 |
| E***9 | Capscrew - 1" - 8nc X 3-1/4" | 2 |
Deck Piping Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Accumulator Assembly - 10 Gal. (Pc1116)
| AK***87 | Note: (1) Included In Ak4787 Bladder Repair Kit | 0 |
| XA***71 | O-Ring (1) | 1 |
| XA***67 | Ring, Anti-Extrushion | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Brake Cabinet/Cab Piping
| EJ***65 | Brake Cabinet Assembly (See Index) (1) | 1 |
| EF***74 | Clamp | 2 |
| EF***77 | Bracket | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Brake Manifold - Two Circuit (Pc0081)
| BF***39 | Valve, Needle | 2 |
| BF***40 | Valve, Check | 3 |
| BF***38 | Plug, Cavity | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Brake Valve Sub-Assembly (Bf2875)
| VE***20 | Boot/Cap Assembly (2) | 1 |
| VE***11 | Boot (1) | 1 |
| VE***44 | Machine Screw (Special) | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Brake Valve Sub-Assembly - 1 (Bf2875)
| BF***91 | Stud | 2 |
| BF***94 | Plunger | 2 |
| BF***89 | Housing, Dual Valve | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Brake/Steering Valve Piping
| EC***75 | Plate, Cover | 1 |
| HA***60 | Hose - To Port "Px" (Brake) | 1 |
| HA***58 | Hose - To Port "Ls" (Steering) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Diff. Switch Assm (Brake Valve) (Bf4593)
| BF***09 | Plug | 2 |
| BF***07 | Switch Assembly | 1 |
| BF***10 | Plug, Screw | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Diff. Switch Assm (Relay Valve) (Bf2876)
| BF***09 | Plug | 2 |
| BF***11 | Spring, Regulator | 1 |
| BF***07 | Switch Assembly | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Dual Relay Valve (Pc1022)
| BF***76 | Switch Assembly, Differential (See Index) | 1 |
| BF***65 | Connector Assembly | 1 |
| BF***93 | Plunger | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Electronic Treadle (Pb9506)
| BF***95 | Cover | 1 |
| BF***94 | Lever, Treadle (4) | 1 |
| BF***55 | Base Plate - 45 Deg | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Hoist Pilot Valve Assm (Pb6922)
| 11***C1 | Poppet, Check Valve | 1 |
| 87***C1 | O-Ring | 1 |
| 89***C1 | Spring | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Hydraulic Brake Cabinet Assembly (Ej8765)
| C***0 | Nut - 1/4" - 20nc (1) - Qty 100 (2) | 2 |
| C***1 | Capscrew - 3/8" - 16nc X 16nc X 3/4" | 4 |
| C***4 | Lockwasher - 1/4" (1) - Qty 100 (2) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Hydraulic Brake Cabinet Assembly - 1 (Ej8765)
| DD***40 | Flat Washer - 1/2" (2) | 2 |
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 6 |
| DL***72 | Sleeve, Insulating | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Hydraulic Brake Cabinet Piping (Bottom)
| EJ***19 | Shield | 1 |
| EJ***92 | Clamp Assembly | 7 |
| EJ***89 | Bracket | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Hydraulic Brake Cabinet Piping (Bottom) - 1
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 8 |
| C***7 | Flat Washer - 3/8" (Attaches With #31 Undercab) | 8 |
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Pedal Installation
| MM***70 | Lockwasher - M8 (1) | 4 |
| MM***60 | Flat Washer - M8 | 4 |
| MM***94 | Capscrew - M8 X 1.25 X 25 | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Deck Piping Group : Retard/Brake Valve Assembly (Pc1183)
| BF***65 | Connector Assembly | 1 |
| BF***81 | Pedal Assembly | 1 |
| BF***75 | Valve Sub-Assembly (See Index) | 1 |
Electric Power Components & Wiring Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Auxiliary Control Cabinet Assembly (Ek2192)
| 01***32 | Washer,(With Auto Emergency Steering) | 15 |
| EH***87 | Door | 1 |
| EK***87 | Plate, Mounting (Bottom) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Auxiliary Control Cabinet Components & Wiring
| EK***70 | Harness, Ge/Auxilary Box Interface | 1 |
| EH***76 | Plate, Adaptor | 1 |
| EK***27 | Harness, Engine Cense | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Auxiliary Control Cabinet Components - 1
| EK***06 | Relay Board Assembly - Parking Brake - Rb4 (See Fig 55612) | 1 |
| EK***03 | Relay Board Assembly - Stop Light - Rb3 (See Fig 55612) | 1 |
| EG***62 | Resistor, 604k - 1/2" Watt | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Auxiliary Control Cabinet Components - 2
| BF***42 | Front Panel Assembly | 1 |
| BF***40 | Card Case Assembly | 1 |
| BF***52 | Ring, Retaining | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Auxiliary Control Cabinet Components - 3
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 1 |
| EF***15 | Plate, Name - Tb33 | 1 |
| ED***68 | Rod, Threaded | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Auxiliary Control Cabinet Components - 4
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 21 |
| EC***60 | Plate, Name - Dl4 | 1 |
| EC***61 | Plate, Name - Dl6 | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Blower Inlet Ducting
| C***5 | Capscrew - 5/8" - 18nc X 3 1/4" | 4 |
| EJ***80 | Boot | 1 |
| EJ***50 | Bracket | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Control Cabinet Wiring (External)
| CH***12 | Cable - 7m1a | 1 |
| CH***02 | Cable - 74d | 1 |
| CH***36 | Cable, Battery - Red | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Electric Power Components & Wiring
| CH***12 | Cable - 7m1a | 1 |
| CH***02 | Cable - 74d | 1 |
| CH***14 | Cable - 7m1c | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Inlet Duct Mounting
| C***6 | Capscrew - 5/8" - 11nc X 3-1/2" | 2 |
| EK***43 | Plate, Bent | 2 |
| EK***45 | Washer (Special) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Relay And Diode Boards - 1
| EK***91 | Relay Board Assembly Payload, Rb6 (See Fig 55613) (Optional) | 1 |
| EK***82 | Rail, Mounting (Bottom) | 4 |
| EK***93 | Panel, Diode Resistor (See Fig 55613) (2) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electric Power Components & Wiring Group : Relay Boards
| EK***91 | Plate, Circuit Breaker Mounting - Rb4 | 1 |
| EK***06 | Relay Board Assembly - Parking Brake - Rb4 (See Fig 55612) | 1 |
| EK***03 | Relay Board Assembly - Stop Light - Rb3 (See Fig 55612) | 1 |
Electrical System
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Battery Box Assembly
| 42***11 | Battery, (C200 Or F300-20) | 4 |
| 56***30 | Clamp, Hold-Down | 2 |
| 56***40 | Rod, Hold Down | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Battery Charging Alternator (Xa2085)
| BF***60 | Bushing, Pulley | 1 |
| BF***57 | Bushing, Pulley | 1 |
| BF***65 | Bearing, Front | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Battery Control Box Assembly
| CH***18 | Cable - Red | 1 |
| CH***34 | Cable - Red | 1 |
| CH***02 | Cable - Red | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Battery Control Box Assembly - 1
| 42***91 | Clamp (Special) | 15 |
| CH***34 | Cable - Red | 1 |
| CH***35 | Cable - Red | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Body Up & Hoist Limit Switch Instl
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 4 |
| DF***17 | Nut - #10 - 24nc (Brass) | 4 |
| MM***78 | Nut, Hex - Style 1 M10 X 1.50 | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Cab Connector Plate & Wiring
| EJ***40 | Harness, Cab Dash | 1 |
| EJ***38 | Harness, Engine/Cab Diagnostic | 1 |
| EJ***50 | Plate, Connector (See Fig 60686) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Engine Electrical - Left Side
| 04***10 | Clamp | 12 |
| 04***11 | Clip,(Sand And Dusty Spec.) | 5 |
| 07***13 | Hose, Cushion | 12 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Engine Electrical - Right Side
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 6 |
| CH***63 | Cable, Red - Positive | 1 |
| CH***45 | Cable, Black - Negative | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Head/Fog Light Installation
| AK***32 | High Beam Light Assembly (See Fig 55107) (Qty.2 (1)) | 4 |
| AK***33 | Low Beam Light Assembly (See Fig 55107) (Qty.2 (1)) | 4 |
| AK***24 | Light Assembly - Fog Light (See Fig 40877)(Optional) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Left Deck Electrical Group
| 72***62 | Clamp, Vinyl - 5/16" I.D | 1 |
| AK***20 | Flood Light Assembly (Backup) (See Fig 60111) | 1 |
| AK***56 | Light, Front Turn And Clearance (See Fig 41107) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Light Assembly (Super Halogen)
| AK***84 | Bulb, Light - 24v/100w (1)/(2)/(3) | 1 |
| AK***35 | Lens/Reflector - High Beam - (Without Bulb) (3) | 1 |
| AK***36 | Lens/Reflector - Low Beam - (Without Bulb) (2) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Light Assembly (Super Halogen) - 1
| AK***84 | Bulb, Light - 24v/100w (1)/(2)/(3) | 1 |
| AK***37 | Lens/Reflector - Backup - Clear (Without Bulb) (3)/(4) | 1 |
| AK***34 | Lens/Reflector - Backup - Clear (Without Bulb) (5) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Rear Axle Electrical Group
| C***4 | Plug, Pipe - 1 1/4" | 1 |
| C***8 | Capscrew - 3/4" - 10nc X 3" (G5) | 2 |
| C***2 | Plug, Pipe - 1" | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Rear Axle Pressure Sensor (Sm3873)
| SM***39 | Cover, Machined | 1 |
| SM***32 | Rear Cover Assembly | 1 |
| SM***21 | Gasket - #14 Shell | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Rear Lights And Backup Horn Instl
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 1 |
| 72***62 | Clamp, Vinyl - 5/16" I.D | 2 |
| 73***C2 | Alarm, Reversing | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Rear Turn & Clearance Lights
| AK***55 | Turn & Clearance Light Assembly (See Fig 40877) | 2 |
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 16 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Right Deck Electrical Group
| 72***62 | Clamp, Vinyl - 5/16" I.D | 1 |
| AK***20 | Flood Light Assembly (Backup) (See Fig 60111) | 1 |
| AK***56 | Light, Front Turn And Clearance (See Fig 41107) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Service Light & Switches Installation
| AK***03 | (3) Included In Ak7503 Flood (Back-Up) Light Assm | 4 |
| DF***44 | Lockwasher - #6, Zinc Pl | 16 |
| EG***59 | Harness, Engine Service Light | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Electrical System : Steering Accumulator Pressure Switch Instl
| 08***12 | Clip, Clip,(With Auto Emergency Steering) | 4 |
| 78***20 | Sensor, Trans. Control Valve Oil Temperature | 4 |
| EJ***88 | Cover | 2 |
Engine Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Engine Group : Air Cleaner Assembly (Pb6850)
| PB***91 | Vaccum Relief Cup Assembly (Optional) (1) | 3 |
| VS***90 | O-Ring (1) | 3 |
| VS***93 | Gasket (1) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Engine Group : Air Cleaner Indicator Piping
| MM***78 | Nut, Hex - Style 1 M10 X 1.50 | 5 |
| MM***61 | Flat Washer - M10 (1) | 5 |
| TH***38 | Fitting, Restricted | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Engine Group : Air Cleaner Piping & Installation
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 4 |
| C***1 | Capscrew - 3/4" - 10nc X 4 1/4" (Left Rear Deck) | 26 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Engine Group : Engine & Miscellaneous Installation
| BF***03 | Element, Fuel Separator | 3 |
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 4 |
| C***4 | Lockwasher - 1" (1) | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Engine Group : Exhaust Piping
| DF***00 | Nut, Lock - 1/2" - 13nc X 3" | 6 |
| EJ***54 | Blanket, Exhaust | 1 |
| EH***06 | Blanket, Exhaust - R.H | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Engine Group : Exhaust Piping - 2
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 12 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 12 |
| DF***00 | Nut, Lock - 1/2" - 13nc X 3" | 4 |
Frame Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : Access Ladder Installation
| EJ***34 | Ladder, Service - Left Upright (Lower Rear) | 2 |
| TV***48 | Capscrew - 5/8" - 11nc X 1 1/2" (1) | 4 |
| VN***52 | Nut, Locking - 5/8" - 11nc | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : Decals & Warnings
| WA***28 | Decal, Caution - Add Oil Tyd Tank (Side Hydraulic Tank) | 1 |
| WB***65 | Decal, Engine Fuel Cooler (R.H. Frame Forward Front Wheel) | 1 |
| WB***44 | Decal, Oil Fill & Check Procedure (Electric Drive Wheels) | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : Decals & Warnings - 1
| 09***60 | Decal, Komatsu (Black Lettering) (Behind Driver'S Door) | 1 |
| 09***00 | Decal, "Komatsu" (Front Edge Of Decks) | 2 |
| WB***24 | Decal, Information Display (Control Cabinet) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : Deck Sections & Safety Walks
| EC***34 | Strip, Anti - Slip | 1 |
| EC***94 | Flat Washer - 3/4" (Hardened) | 22 |
| EG***44 | Bracket, Extension | 6 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : Decks & Handrails
| EJ***87 | Handrail | 1 |
| EJ***27 | Handrail | 1 |
| EJ***73 | Handrail | 3 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : Frame & Uprights
| 01***45 | Washer,(For Travel Motor) (Not Show) | 12 |
| 01***60 | Flat Washer - M20 (Hardened) | 8 |
| 01***60 | Washer,(Without Rops Guard? Canopy) | 16 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : Grille Installation
| AK***03 | (3) Included In Ak7503 Flood (Back-Up) Light Assm | 1 |
| DF***00 | Nut, Lock - 1/2" - 13nc X 3" | 1 |
| EF***87 | Plate, Bent | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : L.H. Deck Mounting & Miscellaneous
| AK***56 | Light, Front Turn And Clearance (See Fig 41107) | 1 |
| D1***56 | Bumper, Radiator Stabilizer | 1 |
| EC***94 | Flat Washer - 3/4" (Hardened) | 6 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : Ladders, Steps & Platforms
| EC***54 | Strap, Mounting | 4 |
| EJ***73 | Ladder, Diagonal (Stairs) | 1 |
| EJ***16 | Platform - R.H | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : Mirrors & Handrails
| AK***03 | (3) Included In Ak7503 Flood (Back-Up) Light Assm | 1 |
| C***5 | Capscrew - 3/8" - 16nc X 1 3/4" (L.H. Side) | 2 |
| EB***95 | Brace | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : R.H. Convex Mirror Installation
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 4 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 2 |
| H***4 | Lockwasher - 3/8" (Internal Tooth) (1) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Frame Group : R.H. Deck Mounting & Miscellaneous
| 01***60 | Flat Washer - M20 (Hardened) | 16 |
| AK***56 | Light, Front Turn And Clearance (See Fig 41107) | 1 |
| D1***56 | Bumper, Radiator Stabilizer | 1 |
Front Wheel & Brake Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Front Wheel & Brake Group : Front Brake Assembly (Wet Disc) (Ej8852)
| BF***37 | Toric, Seal | 2 |
| BF***17 | Tool, Installation (Not Included In Seal Assembly) | 1 |
| BF***16 | Seal, Ring | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Front Wheel & Brake Group : Front Suspension & Mounting
| AK***61 | Additive, Oil (5 Gal Container) | 1 |
| AK***08 | Note: (1) Included In Ak4308 Seal Kit | 0 |
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Front Wheel & Brake Group : Front Wheel & Mounting
| AK***61 | Ring, Lock - 63" | 1 |
| AK***63 | Band, Bead Seat - 63" | 1 |
| AK***97 | Ring, Side | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Front Wheel & Brake Group : Spindle, Hub And Brake Assembly (Ej5603)
| 56***90 | Pin (1) | 2 |
| AK***20 | Note: (1) Included In Ak4320 Spindle Maintenance Kit | 0 |
| C***0 | Lockwasher, High Collar - 1/2" | 12 |
Fuel System
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Fuel System : Fuel Oil Cooler & Piping
| BF***83 | Bar, Support - R.H | 1 |
| BF***84 | Bar, Support - L.H | 1 |
| BF***82 | Tubes, Its | 46 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Fuel System : Fuel Tank Installation & Piping
| C***4 | Lockwasher - 1" (1) | 4 |
| C***9 | Capscrew - 1" - 8nc X 3 1/2" (1) | 4 |
| D***6 | Cap, Fuel (1)/(2) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Fuel System : Fuel Tank Installation & Piping - 1
Hydraulic System
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Brake Cooling Piping
| EJ***72 | Tube | 1 |
| EG***59 | Tube, Hydraulic | 1 |
| EG***64 | Tube, Hydraulic | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Brake Cooling Piping - 1
| C***4 | Capscrew - 1/2" - 13nc X 4" | 4 |
| C***9 | Flat Washer - 1/2" (Plain) | 8 |
| C***5 | Capscrew - 1/2" - 13nc X 1 3/4" (G5) | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Hoist & Brake Piping
| C***5 | Lockwasher - 7/16" | 10 |
| C***9 | Capscrew - 7/16" - 14nc X 1-1/2" | 8 |
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Hoist Circuit & Hydraulic Piping
| 65***C1 | Plug | 1 |
| C***5 | Lockwasher - 7/16" | 8 |
| C***9 | Capscrew - 7/16" - 14nc X 1-1/2" | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Hoist Control Valve Assembly (Pb9839)
| 11***C1 | Ring, Backup (2)/(3) | 4 |
| BF***46 | Housing, Inlet (1) | 2 |
| BF***49 | Inlet Section Assembly | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Hoist Cylinder & Mounting
| EF***36 | Plate, Retainer | 1 |
| EH***21 | Pin, Upper Hoist | 1 |
| EJ***54 | Hoist Cylinder Assembly (See Index) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Hoist Cylinder Assembly (Ej5954)
| 72***87 | Poppet, Ball | 2 |
| AK***73 | Note: (1) Included In Ak4773 Rebuild Kit | 0 |
| EH***32 | Cylinder Head Assembly | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Hoist Pump Assembly (Pb9008)
| 25***R1 | Nut | 4 |
| 25***R1 | Nut | 8 |
| BF***73 | Gear, Drive | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Hoist Pump Installation
| C***7 | Capscrew - 3/4" - 10nc X 2 3/4" | 4 |
| EH***96 | Mount, Pump/Valve | 1 |
| EB***76 | Washer (Special) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Hydraulic Filter (Hoist/Brake Cooling) (Eh1241)
| AK***70 | Filter, 7 Micron | 1 |
| BF***96 | Ring, Backup - Heat To Tube | 2 |
| BF***32 | Cover Assembly | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Hydraulic Tank Assembly & Installation
| AK***39 | Sensor, Temperature Thermister | 1 |
| C***4 | Plug, Pipe - 1 1/4" | 1 |
| C***1 | Plug, Pipe (3) (Qty.1 (4)) | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Overcenter Manifold Valve Assm (Pc0522)
| BF***98 | Plug, Cavity | 1 |
| BF***97 | Valve, Needle | 1 |
| BF***96 | Valve, Check | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Pump/Hoist Valve Module
| C***7 | Capscrew - 5/8" - 11nc X 3 3/4" (Use With Suffix Dq Only) | 3 |
| C***3 | Capscrew - 7/8" - 9nc X 3" | 3 |
| C***5 | Nut - 5/8" Unc (G5) | 3 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Pump/Hoist Valve Module - 1
| C***5 | Capscrew - 5/8" - 11nc X 1-1/4" | 4 |
| C***0 | Bolt, Slotted Hex Head - 5/8" - 11, 2" Long | 4 |
| C***1 | Lockwasher - 5/8" (3)/(4) | 10 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Rear Axle Hydraulic Piping
| C***0 | Lockwasher, High Collar - 1/2" | 16 |
| C***4 | Capscrew - 1/2" - 13nc X 1 1/2" (Qty. 8 (2)) | 16 |
| D***3 | Plug, Countersunk | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Spool Inlet Section (Ve3810)
| BF***47 | (2) Included In Bk3047 Major Service Kit | 0 |
| BF***48 | (3) Included In Bk3048 Minor Service Kit | 0 |
| VJ***83 | Plug | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Spool Section Assembly - Tank (Bf3050)
| BF***44 | Cover, Spool | 1 |
| BF***42 | Cover, Spool | 1 |
| BF***43 | Spool | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Steering Pump Housing (Front) (Pc1142)
| BF***33 | Nut, Jam | 1 |
| BF***93 | O-Ring (1) | 2 |
| BF***69 | Note: (1) Included In Bf1369 Housing Kit | 0 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Steering Pump Housing (Rear) (Pc1142)
| BF***88 | Screw (7) | 4 |
| BF***39 | Module, Unloader (7) | 1 |
| BF***31 | Orifice (6)/(7) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Steering Pump Rotating Group (Pc1142)
| BF***16 | Bearing | 2 |
| BF***76 | Swash Block (W/ Pin) | 1 |
| BF***17 | Pin, Roll | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Steering Pump Seal Installation (Pc1142)
| BF***68 | (4) Included In Bf1368 Valve Plate Kit | 0 |
| BF***32 | Ring, Back-Up (5) | 1 |
| BF***69 | Note: (1) Included In Bf1369 Housing Kit | 0 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Hydraulic System : Universal Joint Installation
| 12***H1 | (2) Included In 1216225h1 Dust Cap Kit | 0 |
| 53***0V | Flat Washer | 1 |
| 7***3 | Yoke Assembly, Pin, Dowel, Pin Dowel, Dowel | 1 |
Options & Miscellaneous Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Automatic Lubrication System
| CD***19 | Clamp, Worm Drive (1) (Qty 1) (2) | 1 |
| C***1 | Capscrew - 3/8" - 16nc X 16nc X 3/4" | 4 |
| C***4 | Capscrew - 3/8" - 16nc X 1 1/2" (Cab Mounting) (1) | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Automatic Lubrication System - 1
| C***0 | Plug, Pipe - 3/8" | 2 |
| HA***59 | Hose (Front Injectors To Strg Cylinders & Tie Rod Ends) | 4 |
| HA***69 | Hose (L.H. Front Injector To Junction At Horsecollar) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Automatic Lubrication System - 2
| C***1 | Coupling, Pipe (At Left Front Of Anti-Sway Bar) | 2 |
| DC***08 | Nipple, Long - 1/8" X 1 1/2" (At Bottom Of Hoist Cylinders | 2 |
| EG***83 | Plate, Cover (Rear Injectors) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Charging Manifold Assembly (Eb1759)
| EB***57 | Fitting | 1 |
| EB***56 | Manifold, Control | 1 |
| HA***94 | Hose - Structure | 3 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Check Valve Assembly (La1187)
| BF***20 | Seat, Ball Check | 1 |
| BF***24 | Pump/Check Assembly | 1 |
| BF***22 | Gasket | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Engine Oil Reserve System
| BF***61 | Box, Automatic Tank Fill Control (1) | 1 |
| C***0 | Nut - 1/4" - 20nc (1) - Qty 100 (2) | 4 |
| C***6 | Flat Washer - 1/4" (Plain) | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Hydraulic Filter Assembly (Pc0811)
| BF***61 | Element, Filter | 1 |
| BF***59 | O-Ring | 1 |
| BF***56 | Indicator | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Junction Box Assembly (Eh6356)
| EG***18 | Strip, Terminal | 1 |
| EH***99 | Box W/Cover | 1 |
| MM***59 | Flat Washer - M6 | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Junction Box Assembly - 1 (Eh6355)
| EG***18 | Strip, Terminal | 1 |
| EH***99 | Box W/Cover | 1 |
| MM***59 | Flat Washer - M6 | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Junction Box Assembly - 2 (Eh6357)
| EH***96 | Box W/Cover | 1 |
| EG***19 | Strip, Terminal | 1 |
| MM***59 | Flat Washer - M6 | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Junction Box Assembly - Plm Iii (Eg7505)
| 16***46 | Screw, Panel - #10 - 32nf X 1/2", Screw,Cross Pan Hd, #10 - 32 X 1/2" | 4 |
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 4 |
| EG***47 | Harness, Plm Iii Junction Box | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Light Assembly (Weighing System)
| SR***47 | Bulb 24v (Replacement For Ref. # 1, 2, 3) | 1 |
| VE***06 | Gasket, Lens (1)/(2)/(3) | 1 |
| VE***90 | Ring, Retainer (1)/(2)/(3) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Lube Pump Assembly (Xa1984)
| BF***04 | Tube, Housing | 1 |
| BF***06 | Ring, Retaining | 1 |
| BF***94 | Valve, Solenoid | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Lube Pump/Container Assembly (Pc1149)
| BF***43 | Plug, Pipe (Fill) | 1 |
| BF***81 | Adaptor | 1 |
| BF***82 | Nipple | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Payload Meter Iii - Cab
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 4 |
| EJ***36 | Adaptor, Grip Cord | 1 |
| EJ***60 | Payload Meter Iii Assembly | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Payload Meter Iii - Front Suspension
| 07***09 | O-Ring,(With Payload Meter) | 2 |
| 42***70 | Diode (Inside Hydraulic Cabinet)(4) | 1 |
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 5 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Payload Meter Iii - Indicator Lights
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 11 |
| EJ***71 | Harness, R.H. Lights (To Plm Iii Junction Box) | 1 |
| EJ***72 | Harness, L.H. Lights (To Plm Iii Junction Box) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Payload Meter Iii - Rear Axle
| 07***09 | O-Ring,(With Payload Meter) | 2 |
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 4 |
| EH***57 | Junction Box Assembly (See Index) (1) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Reserve System Kit (Pc1135)
| BF***47 | Pump | 1 |
| BF***20 | Led, Red (6 Volt) | 1 |
| BF***49 | Head, Filter | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Service Center - L.H.
| C***1 | Plug, Pipe (3) (Qty.1 (4)) | 1 |
| ED***01 | Ring, Seal (At Radiator) | 1 |
| EJ***59 | Mount, Receivers (See Preceding Page) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Tool Group - International (Ej2634)
| AK***35 | Software, Payload Meter Download | 1 |
| AK***20 | Cd Rom, Payload Data Manager | 1 |
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Options & Miscellaneous Group : Vent Valve Assembly (La0912)
| BF***31 | Cylinder | 1 |
| BF***32 | Piston | 1 |
| BF***33 | Body | 1 |
Rear Wheel & Brake Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Drive Axle & Mounting
| AK***21 | (2) Included In Ak4321 Pan Hard Rod Pin Kit | 0 |
| AK***00 | Note: (1) Included In Ak5000 Drive Pin Kit | 0 |
| C***1 | Lockwasher - 5/8" (3)/(4) | 3 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Park Brake Mntg & Cooling Air Adaptor
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 8 |
| C***1 | Capscrew - 3/8" - 16nc X 16nc X 3/4" | 25 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 25 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Parking Brake Assembly (Ef6160)
| ED***75 | Disc, Hub - Friction | 2 |
| ED***80 | Housing | 1 |
| EF***58 | Housing, Piston | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Rear Axle & Hatch Covers
| C***7 | Flat Washer - 3/8" (Attaches With #31 Undercab) | 2 |
| EF***06 | Plate, Cover | 2 |
| EG***57 | Gasket | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Rear Brake Assembly (Ej8855)
| BF***37 | Toric, Seal | 2 |
| BF***17 | Tool, Installation (Not Included In Seal Assembly) | 1 |
| BF***16 | Seal, Ring | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Rear Brake Mounting
| BF***81 | Seal, Toric | 2 |
| BF***96 | Seal, O-Ring | 2 |
| D***0 | Capscrew - 1/2" - 13nc X 3/4" (Socket Head) (2) | 6 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Rear Suspension & Mounting
| AK***22 | Note: (1) Included In Ak4322 Rear Suspension Pin Kit | 0 |
| EJ***46 | Pin, Bearing (1) | 2 |
| EH***48 | Rear Suspension W/ Bearings (2) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Rear Suspension Assembly (Eh5949)
| AK***61 | Additive, Oil (5 Gal Container) | 1 |
| AK***46 | (2) Included In Ak4446 Rear Suspension Seal Kit | 0 |
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 12 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Rear Wheel Cooling (Exhaust)
| C***1 | Capscrew - 3/8" - 16nc X 16nc X 3/4" | 24 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 24 |
| C***7 | Flat Washer - 3/8" (Attaches With #31 Undercab) | 24 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Rear Wheel & Brake Group : Rear Wheels & Mounting
| AK***61 | Ring, Lock - 63" | 2 |
| AK***63 | Band, Bead Seat - 63" | 2 |
| AK***97 | Ring, Side | 4 |
Retarder Grid Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Retarder Grid Group : Blower Motor (Brush Holder Wiring) (Ge0017)
| BF***86 | Head, Frame | 1 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 4 |
| GE***51 | Cement | 0 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Retarder Grid Group : Blower Motor (Commutator End) (Ge0017)
| BF***88 | Washer, Plain - 1/2" | 4 |
| BF***03 | Varnish (1) | 0 |
| BF***86 | Head, Frame | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Retarder Grid Group : Blower Motor (Field Installation) (Ge0017)
| BF***04 | Coil With Terminals, Exciting | 4 |
| BF***05 | Coil With Terminals, Commutating | 4 |
| C***0 | Bolt, Slotted Hex Head - 5/8" - 11, 2" Long | 16 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Retarder Grid Group : Blower Motor (Non-Commutator End) (Ge0017)
| BF***85 | Head, Frame | 1 |
| BF***97 | Shaft (1) | 1 |
| BF***89 | Cotter Pin - 1/8" Diameter, 2 1/2" Long | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Retarder Grid Group : Brush Holder Assembly (Vs8587)
| VJ***83 | Arm, Pressure | 1 |
| VS***76 | Spring | 1 |
| VJ***85 | Pin, Spring Dowel - 3/16" Diameter, 1 1/8" Long | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Retarder Grid Group : Retarding Grid Assembly (Pc0809)
| GE***28 | Bar, Bus - Insulated | 2 |
| GE***18 | Diffuser Assembly | 4 |
| GE***51 | Resistor | 5 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Retarder Grid Group : Retarding Grid Assembly - 1 (Pc0809)
| BF***88 | Washer, Plain - 1/2" | 0 |
| GE***29 | Tube | 7 |
| GE***34 | Cover, Bottom - 27 1/8" Long | 2 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Retarder Grid Group : Retarding Grid Assembly - 2 (Pc0809)
| BF***99 | Capscrew - 5/16" - 18nc X 3/4" | 0 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 0 |
| GE***34 | Cover, Bottom - 27 1/8" Long | 2 |
Steering System
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Bleeddown Manifold Valve Assm (Pc0700)
| BF***05 | Piston, Pilot | 1 |
| BF***01 | Valve, Solenoid | 1 |
| BF***04 | Valve, Pilot Open | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Flow Amplifier (Pb9992)
| VE***69 | Orifice | 1 |
| VE***55 | Screw, Allenhead | 2 |
| VE***75 | Plug | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Hydraulic Filter Assembly (Steering) (Eh1242)
| AK***72 | Element, Filter | 1 |
| BF***91 | Kit, Core | 1 |
| BF***90 | Head | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Retarder Lever Assembly (Pc0880)
| BF***21 | Housing | 1 |
| BF***24 | Washer, Lock (1) | 2 |
| BF***32 | Plunger, Ball | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering Accumulator Assembly (Pc1339)
| AK***89 | Kit, Bladder Repair | 1 |
| EC***47 | Body, Valve (2) | 1 |
| EJ***87 | Manifold, Gas Valve | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering Arms & Linkage
| AK***23 | Note: (1) Included In Ak4323 Tie Rod And Steering Pin Kit | 0 |
| C***0 | Lockwasher, High Collar - 1/2" | 24 |
| C***3 | Capscrew - 1/2" - 13nc X 11 1/4" (2) | 24 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering Column & Control Valve Instl
| EJ***42 | Bracket, Formed - R.H | 1 |
| EJ***89 | Steering Column & Lever Assm (See Fig 60067) | 1 |
| EJ***43 | Bracket, Formed - L.H | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering Column And Lever Assm (Ej9889)
| EJ***90 | Steering Column Assembly (1) | 1 |
| EK***75 | Angle, Formed | 1 |
| HD***07 | Screw, Machine - #10 - 24nc X 3/4" | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering Column Assembly (Pc1287)
| BF***71 | (6) Included In Bf2071 Tilt Stop Kit | 1 |
| BF***70 | Kit, Tilt Bolt | 1 |
| BF***75 | Nut | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering Control Unit (Pb9881)
| BF***35 | Set, Gear Wheel | 1 |
| BF***38 | Note: (1) Included In Ve3095 Seal Kit | 0 |
| BF***36 | Capscrew, With Pin (Special) | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering Cylinder Assembly (Eh4426)
| AK***07 | Note: (1) Included In Ak4307 Steering Cylinder Rebuild Kit | 0 |
| C***0 | Lockwasher, High Collar - 1/2" | 16 |
| C***3 | Capscrew - 1/2" - 13nc X 11 1/4" (2) | 16 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering Cylinder Piping
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 24 |
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 24 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 4 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering System Piping - 1
| C***5 | Lockwasher - 7/16" | 4 |
| C***9 | Capscrew - 7/16" - 14nc X 1-1/2" | 4 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 12 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering System Piping - 2
| 60***C1 | Plug, Flange - 1" | 1 |
| C***5 | Lockwasher - 7/16" | 31 |
| C***9 | Capscrew - 7/16" - 14nc X 1-1/2" | 28 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Steering System : Steering System Piping - 3
| C***3 | Nut - 1/2" - 13nc (G5) | 1 |
| C***1 | Lockwasher - 5/8" (3)/(4) | 12 |
| C***0 | Lockwasher, High Collar - 1/2" | 1 |
Wheel Motor Group
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Wheel Motor Group : Carrier Assembly - High Speed (Ge1315)
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Wheel Motor Group : Carrier Assembly - Low Speed (Ge0918)
| GE***96 | Thread Lock | 0 |
| GE***08 | Shaft, Planetary Pinion Gear | 4 |
| GE***34 | Carrier, Low Speed | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Wheel Motor Group : Motor Assembly - Wheel - 1 (Ge0053)
| C***0 | Bolt, Slotted Hex Head - 5/8" - 11, 2" Long | 0 |
| GE***15 | Ring, Bus (N) | 1 |
| GE***39 | Wheel, Sensor | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Wheel Motor Group : Motor Assembly - Wheel - 2 (Ge0053)
| BF***60 | Seal, Lip - 7.256" Od | 1 |
| C***0 | Bolt, Slotted Hex Head - 5/8" - 11, 2" Long | 0 |
| GE***33 | Flinger | 1 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Wheel Motor Group : Transmission, Motorized Wheel (Ge1314) : Unit_02_of_02
| BF***17 | Flat Washer - 3/4" (1) | 16 |
| GE***69 | Capscrew - 1/2" - 15nc X 1 3/4" (Socket Head) | 18 |
| GE***29 | Plug, Drain | 8 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Wheel Motor Group : Transmission, Motorized Wheel (Ge1314) : Unit_01_of_02
| BF***81 | Seal, Toric | 2 |
| BF***96 | Seal, O-Ring | 1 |
| D***0 | Capscrew - 1/2" - 13nc X 3/4" (Socket Head) (2) | 6 |
Komatsu : Afe52-A(930e-3 S/N A30304 Codelco) : Wheel Motor Group : Wheel Motor Assembly (Pc1625)
| GE***14 | Transmission, Motorized Wheel (See Index) | 1 |
| GE***11 | Capscrew - 1" X 8nc X 4 1/2" | 12 |
| GE***49 | Rotor, Lock | 2 |
AFE52-A(930E-3 S/N A30304 CODELCO) serial number reference
On this 930E-3 the product identification (PIN) plate sits on the front frame rail, just ahead of the right front wheel, and lists the truck model, the PIN (chassis serial number), and max GVW rating. For this generation Komatsu uses a single letter plus a running 5-digit number (A30304, not a 3-letter construction-equipment style prefix), so the digits themselves place the unit in the production sequence rather than encoding plant or engine. The AFE order/arrangement code (e.g. AFE52-A) is a Komatsu sales/order designation tied to that specific PIN and customer, found on the order paperwork and parts-book cover rather than stamped on the PIN plate itself.
| Prefix | Identifies | Notes |
|---|---|---|
| A30304 | Komatsu 930E-3 ultra-class haul truck, order/arrangement AFE52-A, CODELCO (Chile) | Single-unit arrangement code: AFE52-A ties to exactly one PIN, A30304, built for CODELCO. Falls inside the factory shop-manual serial block A30304-A30309, the opening block of the 930E-3 program (the preceding 930E-2 block ends just below A30304, at A30301-A30303), so this unit is among the earliest 930E-3 chassis built. Diesel-AC electric drive haul truck; engine per Komatsu literature for this era is the SSDA16V160 V-16 (Komatsu's own designation for the Cummins QSK60 block), rated around 2000 kW (2700 hp), driving GDY106 wheel motors. Exact engine fitment for A30304 itself is not separately published outside the shared shop-manual block - confirm engine serial/rating against the individual data plate. |
Frequently asked questions
What engine does the Komatsu AFE52-A (930E-3, S/N A30304, CODELCO) run?
It's fitted with a Komatsu SSDA16V160, a turbocharged 16-cylinder four-stroke diesel rated at about 2,014 kW (2,700 hp) gross, driving a traction alternator and one AC wheel motor per rear wheel. Some trucks on this platform carried a mechanically similar Cummins QSK60 V16 as a factory alternate; confirm the fitted engine against this unit's nameplate.
What is the operating weight of this truck?
Empty operating weight is about 210,187 kg (463,383 lb). Rated payload is 290 t (320 US tons), which brings gross vehicle weight to roughly 502,000 kg (1,106,663 lb) loaded.
What replaced the Komatsu 930E-3?
Komatsu succeeded the 930E-3 with the 930E-4, which kept the same payload class but listed the Cummins QSK60 as an alternate engine alongside the Komatsu SSDA16V160, before the line moved on to the 930E-5 and 930E-5SE.
What AFE52-A(930E-3 S/N A30304 CODELCO) owners discuss
How does the AC drive powertrain on this truck perform day to day, and is it reliable?
This 930E-3 runs a diesel-electric AC drive powertrain: a V-16 Komatsu SSDA16V160 diesel drives a GE-type traction alternator that powers one GDY106 AC wheel motor per rear wheel end. Operators who moved off older DC-drive haul trucks generally report the AC drive responds quicker under load and holds more usable power through the rev range, especially on grade. The 930E platform has one of the longer service track records in the ultra-class segment, and owners cite predictable wheel-motor behavior with few drive-related surprises when cooling and lubrication intervals are kept current. Most complaints trace back to deferred maintenance on cooling and filtration rather than a fault in the drive system itself.
What tire and rim wear patterns are typical for trucks in this class?
Tire wear on a 320-ton class hauler is driven mostly by load balance and haul-road condition, not a defect in the truck. Uneven loading or hard cornering on grade accelerates shoulder wear on the rear duals. These trucks use a multi-piece Smart Rim design with separate bead-seat bands and lock rings, letting crews pull rear tires without breaking down the whole rim; shops report noticeably faster tire service compared with older rim styles. Autonomous or assist-operated versions of this truck are noted to even out tire wear further because throttle and braking inputs stay more consistent than with a human operator.
What are the known quirks of the engine fitted to this series?
The 930E-3 standard engine is a Komatsu SSDA16V160, a V-16, 4-cycle diesel rated around 2,014 kW (2,700 hp) at 1900 rpm. It is a large, low-stressed engine by mining-truck standards, and owners generally credit it with long time-between-overhaul figures when the cooling and fuel systems are kept clean. Some trucks on this platform were built with a mechanically equivalent Cummins QSK60 V-16 as a customer-specified alternate; check the engine nameplate on this unit to confirm which is actually fitted, since minor accessory-drive and torque-curve differences exist between the two. Turbo pre-cleaners need regular inspection on either engine option; a clogged pre-cleaner is a common cause of gradual power loss that gets blamed on the engine when it is really an intake restriction.
What electrical or sensor issues come up most with these trucks?
Most field electrical complaints on this generation trace back to dust and moisture getting into the electrical cabinet rather than outright component failure. The cabinet is held under positive pressure by a dedicated blower through HEPA-stage filtration. If door seals, latches, or the pressurizer blower fall out of spec, dust intrusion causes nuisance sensor and control-circuit fault codes that look like a wiring or module problem but clear up once filtration and seals are restored. Corroded connectors and chafed harness runs around the wheel motors and inverter cabinet are the next most common source of intermittent faults, especially on trucks that see humid pit conditions.
How does the retarding and brake system behave, and what maintenance does it need?
Dynamic retarding sends braking energy from the wheel motors into a resistor grid. One grid stage stays engaged whenever retard is active because the grid blower motors are wired across it, so grid blower condition is tied directly to retarder cooling; a weak or failed blower shows up as grid overheating under sustained downhill retarding. Service and parking brakes are oil-cooled wet discs. Techs report new discs need to be pre-soaked in the correct brake oil before installation to avoid dry-start scoring on first use. Grid covers and latches should be checked at routine service since a loose cover lets debris into the grid stack. A retarder or brake fault directly affects the truck's ability to control speed loaded and empty, so have your dealer verify grid and brake function on a road test before returning the truck to service.
What about the suspension struts on this truck? Any known issues?
Front and rear ride on nitrogen-charged hydraulic strut cylinders rather than leaf springs. Struts get a pressure check as part of routine 500-hour service. A slow ride-height sag or an oily film around a strut seal is the usual first sign of a nitrogen or oil leak rather than sudden failure. Recharging needs the correct nitrogen-to-oil ratio for each strut; getting that wrong changes ride characteristics and can accelerate seal wear. Strut condition affects frame loading and ride control at full payload, so have your dealer verify strut pressures and seal condition rather than judging by ride height alone.
What should I check before buying a used one of these trucks?
Pull service records first and confirm 500-hour items, brake and retarder function test, slow-mode and emergency-stop checks, steering accumulator bleed-down, strut pressure checks, were actually performed on schedule and not just signed off. Physically inspect the main frame, cross members, spring or strut seats, and dump-body mounting points for cracks, weld repairs, or fresh paint that could be hiding a repair. Check the wheel motor and hub plug areas for contamination, and pull a rim to inspect tire and rim condition rather than trusting tread depth alone. Confirm electrical cabinet filtration and door seals are intact; a truck with a history of dust-related fault codes usually shows visible dust staining inside the cabinet. Ask about total hours against the fleet's duty cycle, since mining duty commonly runs several times the annual hours of construction equipment and wears components 20 to 40 percent faster, so low hours on paper does not always mean low wear. Finally, ask about recovery history. These trucks are hard to tow any real distance because of the electric drive, so a unit that was dragged without the proper tow rig may have hidden driveline damage worth having a dealer inspect.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AFE52-A(930E-3 S/N A30304 CODELCO) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.