Komatsu AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu AFE50-GA is a rigid dump truck variant of the 830E series, specifically configured as a mine glider kit for the Arch Mineral Ruffner Mine. The 830E class is a heavy mining hauler that succeeded the 730E and was later succeeded by the 830E-5. This specific unit utilizes the SAA6D140E-5A engine. Operating weights for the 830E series vary by configuration and series, typically ranging from 120,000 kg to 140,000 kg depending on the specific model variant and attachment package.
Across the 830E generations, Komatsu introduced iterative updates to the electric drive system, engine emissions packages, and undercarriage durability to meet evolving mining demands. The AFE50-GA configuration is significant in the used and parts market because it represents a specialized glider kit application. This specific configuration requires distinct parts and maintenance knowledge compared to standard 830E units, making accurate serial-specific documentation critical for fleet operators maintaining these specialized assets.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) specifications
Engine
| Engine model | Komatsu SDA16V160 |
| Number of cylinders | 16 |
| Gross power | 1,865 kW (2,500 HP) @ 1,800 rpm |
| Net fly wheel power | 1,778 kW (2,385 HP) @ 1,800 rpm |
| Emissions tier | Tier IV certified |
| Fuel type | Diesel |
Weights
| Operating weight | 411,136 kg (906,400 lbs) |
| Engine dry weight | 8,099 kg (17,857 lbs) |
| Engine wet weight | 8,558 kg (18,867 lbs) |
| Standard body weight | 29,830 kg (65,762 lbs) |
Dimensions
| Turning circle | 29.3 m (96 ft) |
| Rail depth minimum | 864 mm (34 in) |
| Rail width | 305 mm (12 in) |
| Side plate thickness | 16 mm (0.62 in) |
| Top/bottom plate thickness | 32 mm (1.25 in) |
| Floor sheet thickness | 16 mm outer, 19 mm center (0.63 in outer, 0.76 in center) |
| Front sheet thickness | 12 mm (0.47 in) |
| Side sheet thickness | 8 mm (0.31 in) |
| Canopy sheet thickness | 5 mm (0.19 in) |
| Rim assembly | 813 x 1,448 x 152 mm (32 x 57 x 5.5 in) |
| Standard tire and rims | 50/80 R57 |
| Standard tire weight (optional rim) | 23,016 kg (50,750 lbs) |
Performance
| Max speed | 64.5 km/h (40 mph) |
| Electric dynamic retarder power | 3,207 kW (4,300 HP) |
| Hoist time (power-up loaded) | 23 seconds |
| Hoist time (float-down empty) | 17 seconds |
| Hoist time (power-down) | 16 seconds |
| Parking brake gradeability | Rated to hold on ±15% grade at maximum gross vehicle weight |
| Hoist and brake cooling pump output | 931 L/min (246 gpm) at 1,900 rpm and 18,960 kPa (2,750 psi) |
| Steering and brake system relief pressure | 20,685 kPa (3,000 psi) |
| Hoist system relief pressure | 17,237 kPa (2,500 psi) |
| Max service apply pressure | 13,100 kPa (1,900 psi) |
Service capacities (summary)
| Fuel tank | 4,542 L (1,200 US gal) |
| DEF tank | 288 L (76 US gal) |
| Hydraulic system | 1,325 L (350 US gal) |
| Hydraulic reservoir | 947 L (250 US gal) |
| Cooling system | 568 L (150 US gal) |
| Engine crankcase | 363 L (96 US gal) |
| Motor gear box | 58 L (15 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Komatsu AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
Servicing the AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) beyond the schedule
Predictive Maintenance & Fluid Analysis
Implement Komatsu KOWA fluid analysis at every 500-hour service interval to monitor engine wear metals and hydraulic contamination. Track hydraulic oil particle counts and viscosity changes to predict pump and valve failures. Use KOMTRAX telematics to monitor load frequency and fault codes, allowing for proactive scheduling of hydraulic oil changes at 2,000 hours. Analyze coolant SCA levels to prevent liner cavitation and corrosion in the SAA6D140E-5A engine block.
Corrective & Common Repairs
Address frequent failures in the 830E electric drive system by inspecting traction motor brushes and rectifier components during major service intervals. Replace hydraulic return filters at 500 hours to prevent contamination of sensitive valve spools. Inspect suspension cylinder seals and bushings for leaks and wear, replacing them before catastrophic failure occurs. Check brake pad thickness and wet disc condition regularly to maintain safe stopping distances on steep haul roads.
Overhaul & Rebuild Points
Plan for major powertrain overhauls based on accumulated hours and fluid analysis trends. The SAA6D140E-5A engine typically requires valve adjustments and injector servicing at 1,000-hour intervals, with full overhaul considered after significant wear metal accumulation. Final drive and axle differentials require oil changes at 1,000 hours and full rebuilds when gear wear exceeds limits. Electric drive components, including rectifiers and traction motors, have specific overhaul lifespans dictated by thermal cycling and load profiles.
Seasonal & Environment Servicing
In cold climates, use low-temperature hydraulic fluids and ensure coolant glycol concentration is adequate to prevent freezing. In hot environments, frequently clean radiator and oil cooler fins to prevent overheating. Inspect air intake systems for dust ingress, especially in open-pit coal operations like Ruffner Mine, and clean or replace air filter elements as indicated by the restriction indicator. Adjust tire pressures and inspect for cuts or impacts based on seasonal road conditions and material types.
AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| PB7001 | Filter, Air (See Fig 55436) | Air intake service | Check fitment → |
| BF5467 | Filter, Air | Air intake service | Check fitment → |
| SM5084 | Decal, Cylinder Oil Filter | Lubrication service | Check fitment → |
| BF5252 | Holder, Internal Filter | Scheduled service item | Check fitment → |
| XA2242 | Holder, External Filter | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CA115 | Engine and Backup Speed Sensor Error | Faulty crankshaft speed sensor, broken wiring harness, or corroded connector at the sensor pin. | Inspect the speed sensor and verify voltage at the pin connector; replace the sensor if defective. |
| CA441 | Battery Voltage Low Error | Weak battery, failing alternator, or loose/corroded battery cables. | Check battery charge state and alternator output; tighten connections and replace faulty components. |
| CA442 | Battery Voltage High Error | Faulty voltage regulator or alternator overcharging. | Test alternator output and replace the regulator or alternator if voltage exceeds specifications. |
| CA122 | Intake Air Pressure Sensor High Voltage Error | Intake air pressure sensor failure, shorted wiring, or actual over-boost condition. | Verify intake pressure sensor operation and inspect wiring for shorts or damage. |
| CA123 | Intake Air Pressure Sensor Low Voltage Error | Intake air restriction, sensor short to ground, or sensor failure. | Check for airflow restrictions and inspect the sensor circuit for shorts. |
| CA451 | Common Rail Pressure Sensor High Error | Faulty rail pressure sensor, actual overpressure, or wiring issue. | Diagnose the fuel rail pressure sensor and check pump lines for blockages or leaks. |
| CA234 | Engine Overspeed | Throttle calibration error, engine load cycle issue, or operator misuse. | Verify throttle calibration and inspect the engine load cycle for anomalies. |
| CA111 | Engine Controller Internal Fault | Critical failure within the Engine Control Module (ECM). | Replace or reprogram the ECM after verifying power and ground connections. |
| AA10NX | Air Cleaner Clogging | Clogged air filter element or restricted intake path. | Replace the air filter element and inspect the intake system for obstructions. |
| CA2311 | IMV Solenoid Valve Failure | Failed Inlet Manifold Valve (IMV) solenoid or open/short in the control circuit. | Replace the IMV solenoid valve or inspect the wire harness for continuity. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) attachments & work tools
Main Work-Tool Families
The AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) is a rigid dump truck configured with a mine-glider kit, not a standard excavator or dozer with interchangeable front/rear attachments.
Coupler/Mounting Systems
The machine utilizes a fixed-frame rigid body structure integrated with the mine-glider kit; no external quick-coupler systems or standard tool mounting points are documented for this specific serial range.
Hydraulic Kit/Arrangement Notes
Hydraulic systems are dedicated to the truck's operational functions (steering, braking, body hoist) and the glider kit mechanisms; no auxiliary hydraulic kits for external work tools are specified in the available parts documentation.
Notable Factory Configurations/Guarding
The unit is factory-configured as a mine-glider kit variant for Arch Mineral at the Ruffner Mine; specific guarding, ROPS/FOPS, or safety options are not detailed in the provided parts catalog excerpts.
All AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) assemblies by section
Every catalogued assembly group for the Komatsu AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Cab Group
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Air Conditioner Compressor Installation
| BF***00 | Clutch, Plate W/ Hub | 1 |
| BF***48 | Locknut, Shaft | 1 |
| C***4 | Capscrew - 3/8" - 16nc X 1 1/2" (Cab Mounting) (1) | 4 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Air Conditioning Piping & Installation
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 5 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 2 |
| C***6 | Capscrew - 1/2" - 13nc X 1 3/4" | 4 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Cab Assembly (Ek4250)
| 11***C1 | Capscrew | 2 |
| ED***12 | Seal, Strip | 2 |
| ED***09 | Seal, Strip | 2 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Cab Assembly - 1 (Ek4250)
| 31***R1 | Capscrew - M8 X 12 (Hinge To Door) | 14 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 6 |
| H***4 | Capscrew - 3/8" - 16nc X 1/2" (Bracket Mounting) (2) | 6 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Door - L.H. (Sm5948)
| 20***R1 | Trim (Bulk) - 19 Inches | 0 |
| 31***R1 | Bolt, Hex. Flange Hd. - M6 | 12 |
| 31***R1 | Capscrew - M8 X 12 (Hinge To Door) | 10 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Door - R.H. (Sm5949)
| 20***R1 | Trim (Bulk) - 19 Inches | 0 |
| 31***R1 | Bolt, Hex. Flange Hd. - M6 | 12 |
| 31***R1 | Capscrew - M8 X 12 (Hinge To Door) | 10 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Heater Piping & Installation
| EB***56 | Hose, Heater - Outlet | 1 |
| EC***93 | Seal, Neoprene Sponge | 2 |
| EC***94 | Seal, Neoprene Sponge | 2 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Heater/Ac Drain Hose Installation
| HK***25 | Hose | 1 |
| HC***08 | Clamp, Worm Drive (At Heater) | 3 |
| KC***35 | Fitting, Pipe | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Heater/Air Conditioner Assembly - 1 (Pc1066)
| BF***32 | Valve, Block | 1 |
| BF***67 | Bushing, Snap - 3/16" | 2 |
| BF***60 | Converter | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Instrument Panel Assembly
| CC***03 | Clamp, Worm Drive | 4 |
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 2 |
| EJ***06 | Overlay, Lexan | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Operator Controls & Overhead Panel
| 11***C1 | Holder, Document | 1 |
| 27***R1 | Screw, Self Tap. - 1/4" - 14 X 1" | 4 |
| 31***R1 | Bolt, Hex. Flange Hd. - M6 | 10 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Operator'S Seat Assembly (Ej8295)
| LA***35 | Kit, Hardware | 1 |
| LA***38 | Kit, Hardware (1) | 1 |
| VE***35 | Kit, Air Lumbar | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Operator'S Seat Assembly - 1 (Ej8295)
| BF***13 | Kit, Seat Belt/Hardware | 1 |
| BF***14 | Kit, Tether | 1 |
| BF***26 | Handle, Slide | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Operator'S Seat Assembly - 2 (Ej8295)
| LA***45 | Frame, Seat | 1 |
| VE***70 | Kit, Side Plate | 1 |
| VE***69 | Kit, Torsion Bar | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Operator'S Seat Assembly - 3 (Ej8295)
| BF***42 | Kit, Tooth Plate | 1 |
| LA***51 | Lever, Rear | 1 |
| LA***47 | Spring, Tension | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Operator'S Seat Assembly - 4 (Ej8295)
| BF***88 | Hose, Plastic | 1 |
| VE***79 | (3) Included In Ve9079 Repair Kit | 1 |
| VE***61 | Seat Frame Assembly (See Following Three Pages) (2) | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Operator'S Seat Assembly - 5 (Ej8295)
| BF***95 | (5) Also Included In Bf0695 Bumper Kit | 1 |
| BF***94 | Kit, Shock Absorber | 1 |
| BF***78 | (6) Also Included In Bf0478 Bumper Kit | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Operator'S Seat Installation
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Overhead Dash Module
| 31***R1 | Bolt, Hex. Flange Hd. - M6 | 6 |
| EK***27 | Panel, Overhead Dash | 1 |
| EK***05 | Warning Lights Module (See Fig 41782) (1) | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Passenger Seat Installation
| 25***R1 | Flat Washer - 5/16" (Hardened) | 1 |
| C***0 | Nut, Hex (Grab Handle) | 1 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Cab Group : Windshield Wiper/Washer Installation
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 4 |
| EC***92 | Hose - Windshield Washer | 2 |
| EG***35 | Tee, Hose | 1 |
Deck Piping Group
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Accumulator Assembly (1 Gal.) (Pb7057)
| TD***79 | Core, Valve (4) | 1 |
| TV***48 | Nut, Stop (2) | 1 |
| TV***49 | Ring, Anti-Extrusion (1)/(5) | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Accumulator Assembly (2.5 Gal.) (Pb7058)
| VS***77 | Locknut (6)/(2) | 1 |
| VS***76 | Spacer (6)/(2) | 1 |
| VE***95 | Nut, Stop (2) | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Brake Cabinet Assembly (Ek2165)
| BF***04 | Valve, Pilot Open | 1 |
| C***0 | Nut - 1/4" - 20nc (1) - Qty 100 (2) | 2 |
| C***5 | Capscrew - 3/8" - 16nc X 1 3/4" (L.H. Side) | 2 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Brake Cabinet/Cab Piping
| EF***74 | Clamp | 2 |
| EK***65 | Brake Cabinet Assembly (See Index) (1) | 1 |
| EF***77 | Bracket | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Brake Manifold - Two Circuit (Pc0080)
| BF***39 | Valve, Needle | 2 |
| BF***09 | Valve, Pilot (Automatic Apply) | 1 |
| BF***40 | Valve, Check | 3 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Brake Valve Pedal Assembly (Pc0418)
| BF***55 | Pedal, Brake | 1 |
| BF***65 | Connector Assembly | 1 |
| BF***07 | Switch, Differential (See Index) | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Brake Valve Sub-Assembly (Bf4474)
| VE***20 | Boot/Cap Assembly (2) | 1 |
| VE***11 | Boot (1) | 1 |
| VE***44 | Machine Screw (Special) | 4 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Brake Valve Sub-Assembly - 3 (Bf4474)
| BF***89 | Housing, Dual Valve | 1 |
| BF***59 | Note: (1) Included In Bf1859 Spool/Sleeve Kit | 0 |
| BF***60 | Note: (1) Included In Bf1860 Spring Kit | 0 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Brake/Steering Valve Piping
| HA***60 | Hose - To Port "Px" (Brake) | 1 |
| HA***58 | Hose - To Port "Ls" (Steering) | 1 |
| HA***89 | Hose - To Port "T" (Brake) | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Differential Switch Assembly (Bf4607)
| BF***09 | Plug | 1 |
| BF***07 | Switch Assembly | 1 |
| BF***10 | Plug, Screw | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Electronic Treadle (Pb9506)
| BF***95 | Cover | 1 |
| BF***94 | Lever, Treadle (4) | 1 |
| BF***55 | Base Plate - 45 Deg | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Hoist Pilot Valve Assembly (Pb6922)
| 11***C1 | Poppet, Check Valve | 1 |
| 87***C1 | O-Ring | 1 |
| 89***C1 | Spring | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Deck Piping Group : Throttle & Retarder Installation
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 2 |
| DC***79 | Screw, Slotted Flat Head - #10-32, 5/8" Long | 2 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 2 |
Frame Group
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : Access Ladders Installation
| EJ***34 | Ladder, Service - Left Upright (Lower Rear) | 2 |
| TV***48 | Capscrew - 5/8" - 11nc X 1 1/2" (1) | 4 |
| VN***52 | Nut, Locking - 5/8" - 11nc | 4 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : Decals & Warnings
| WA***03 | Plate, Raised Body Warning (Hydraulic & Fuel Tanks) (2) | 2 |
| WA***28 | Decal, Caution - Add Oil Tyd Tank (Side Hydraulic Tank) | 1 |
| WA***69 | Decal, Emergency Dump Procedure (Behind Hoist) | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : Decals & Warnings - 1
| 09***60 | Decal, Komatsu (Black Lettering) (Behind Driver'S Door) | 1 |
| 09***20 | Decal, Komatsu (Black Lettering) (Top Front Of Grille) | 1 |
| 09***60 | Decal, Komatsu (White Lettering) (Behind Driver'S Door) | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : Deck Sections & Safety Walks
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 4 |
| C***7 | Nut - 3/4" - 10nc | 4 |
| C***6 | Capscrew - 3/4" - 10nc X 2-1/2" | 4 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : Frame & Uprights
| C***7 | Capscrew - 1" - 8nc X 2-1/2" | 16 |
| C***5 | Nut - 5/8" Unc (G5) | 8 |
| ED***58 | Backer | 4 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : Hood, Grille & Handrail
| C***8 | Capscrew - 3/4" - 10nc X 3" (G5) | 8 |
| C***9 | Capscrew - 5/16" - 18nc X 2" | 2 |
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 14 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : L.H. Deck Mounting & Miscellaneous
| EJ***81 | Cover, Deck Access | 1 |
| EC***94 | Flat Washer - 3/4" (Hardened) | 6 |
| EG***44 | Bracket, Extension | 6 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : Ladder, Steps & Platforms
| AK***03 | (3) Included In Ak7503 Flood (Back-Up) Light Assm | 1 |
| DA***57 | Flat Washer (Special) | 6 |
| EC***54 | Strap, Mounting | 4 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : Mirrors & Handrails
| EJ***58 | Handrail - Front Center | 1 |
| EC***64 | Plate | 1 |
| EJ***84 | Handrail | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : R.H. Convex Mirror Installation
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 4 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 2 |
| C***8 | Capscrew - 5/16" - 18nc X 1" (2) | 8 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Frame Group : R.H. Deck & Mounting
| EG***44 | Bracket, Extension | 8 |
| EK***15 | Deck - R.H | 1 |
| MM***97 | Locknut - M20 X 2.50 Class 10 | 8 |
Steering System
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Steering System : Steering Accumulator Assembly (Pc1338)
| AK***89 | Kit, Bladder Repair | 1 |
| EC***47 | Body, Valve (2) | 1 |
| EJ***87 | Manifold, Gas Valve | 1 |
Komatsu : Afe50-Ga(830e S/N Gae2144830e Arch Mineral Ruffner Mine-Glider Kit) : Steering System : Steering Accumulator Installation
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 8 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 8 |
| C***7 | Flat Washer - 3/8" (Attaches With #31 Undercab) | 8 |
AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) serial number reference
The PIN plate is located on the emissions/export plate, typically riveted near the engine bay or behind the cab on the right-hand side. The prefix is the first three characters of the 17-character ISO PIN (e.g., GAE), which identifies the specific configuration variant and serial range for the AFE50-GA model.
| Prefix | Identifies | Notes |
|---|---|---|
| GAE | AFE50-GA | 830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT. Single unit identified in parts catalog listings. |
Frequently asked questions
What engine does the AFE50-GA use?
The AFE50-GA variant of the 830E series uses the SAA6D140E-5A engine.
What is the operating weight of the 830E series?
Operating weights for the 830E series vary by configuration and series, typically ranging from 120,000 kg to 140,000 kg.
What model replaced the 830E?
The 830E series was succeeded by the 830E-5.
Need a specific AFE50-GA(830E S/N GAE2144830E ARCH MINERAL RUFFNER MINE-GLIDER KIT) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.