Komatsutruckselectric (830e)
Komatsu AFE32-AA(830E S/N 31807 MT. THORLEY)
Maintenance schedule, common problems & OEM parts breakdown
The Komatsu AFE32-AA (830E S/N 31807, Mount Thorley) is an ultra-class rigid-frame mining haul truck built by Komatsu America in Peoria, Illinois. It carries a Komatsu SDA16V160/SSDA16V160 mechanically governed, turbocharged and aftercooled 16-cylinder diesel rated at roughly 1,865 kW (2,500 hp) gross, driving a GE DC electric wheel-motor propulsion system under Statex III control rather than the later AC Invertex system. Loaded gross weight runs around 385.85 t (850,650 lb), unladen weight is near 162.5 t (358,300 lb), and nominal payload falls in the 220-231 t range depending on body and tire configuration. The 830E line traces back to a DC-drive design introduced in 1989; this chassis was one of eleven 830E DC trucks Komatsu delivered new in 1996 to the Mount Thorley (Mount Thorley Warkworth) coal operation in the Hunter Valley, New South Wales.
Komatsu carried the 830E forward from this early GE DC/Statex III driveline into an AC-drive 830E-1AC using Invertex I/II control (first GTO, later IGBT inverters), which replaced the brush-and-commutator DC wheel motors of this generation with AC induction motors and improved wet-condition traction and serviceability; the line was revised again as the 830E-5 with a Cummins QSK60 engine, a different engine and drive package entirely from this DC-era truck. Original DC-drive units like S/N 31807 ran under a Komatsu maintenance and repair contract at Mount Thorley from 1996 delivery until around 2009, when servicing passed to the mine's own maintenance department. Their mechanically simpler, non-ECM engine and DC electrics make them a distinct parts and service category from the later AC-drive 830E fleets that have since expanded at Hunter Valley coal operations, and demand on trucks of this vintage now centers on wheel-motor, final-drive, suspension, and hydraulic components sized to this specific DC driveline rather than the AC-drive parts common to newer 830E-1AC and 830E-5 units.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Komatsu AFE32-AA(830E S/N 31807 MT. THORLEY) specifications
Engine
| Engine model | Komatsu SDA16V160, 16-cylinder turbocharged, aftercooled diesel; also referred to in factory literature as SSDA16V160 |
| Displacement | 60 L (3,660 cu in) |
| Gross power | 1,865 kW (2,500 hp) @ 1,900 rpm (SAE J1995). Some spec sheets list gross power as low as 1,760 kW (2,360 hp) - that lower figure matches the net/flywheel rating and may be mislabeled on those sheets. |
| Net power | 1,798-1,818 kW (2,360-2,409 hp) @ 1,900 rpm, flywheel rating (ISO 9249 / SAE J1349) |
| Emissions tier | Not emissions-tiered. Mechanically governed diesel typical of early-1990s production; no EPA/EU tier certification applies to this generation. |
Weights
| Operating (gross/loaded) weight | 385.85 t (850,650 lb / 425.3 US tons) |
| Empty (unladen) weight | 162.5-164.2 t (358,259-362,000 lb); figure varies slightly by source and factory-fit options |
| Rated payload | 221-222 t (488,000-490,000 lb / 244-245 US tons) |
| Ground pressure | Not published for this class. Rigid-frame haul trucks of this size are rated by axle load, not ground pressure. |
Dimensions
| Overall length | 14.15-14.17 m (46.4-46.5 ft) |
| Overall width | 7.32-7.35 m (24.0-24.1 ft) |
| Overall height (empty, to canopy/ROPS) | 6.88-6.89 m (22.6 ft) |
| Wheelbase | 6.35-6.37 m (20.8-20.9 ft) |
| Ground clearance | 1.28 m (4.17 ft) |
| Turning radius | approx. 14.2 m (46.6 ft) |
Performance
| Maximum travel speed | 48-64 km/h (30-40 mph); figure varies by source, final drive gearing and drive-motor rating |
| Gradeability | 20% |
| Dump body capacity, heaped (2:1 SAE) | 147 m3 (192-193 cu yd) |
| Dump body capacity, struck | 117 m3 (153 cu yd) |
| Body raise time | approx. 25 seconds |
Service capacities (summary)
| Fuel tank | 4,542 L (1,200 US gal) |
| Hydraulic system | 946 L (250 US gal) |
| Cooling system | 568 L (150 US gal) |
| Engine oil (crankcase) | approx. 223 L (59 US gal). Not separately published for this exact serial range - figure drawn from SDA16V160 engine-family service data. Verify against the dealer service chart for S/N 31807. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AFE32-AA(830E S/N 31807 MT. THORLEY) fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with oil filters) | 280 L (74 US gal) | Komatsu Genuine Engine Oil (EO-series diesel engine oil). Grade by ambient temperature per the Komatsu viscosity chart: SAE 10W-30 covers the widest temperature swing, SAE 15W-40 for consistently warm sites, straight SAE 30 for hot, stable climates. |
| Cooling system | 568 L (150 US gal) | Komatsu Supercoolant AF-NAC, extended-life ethylene-glycol coolant. Mix ratio set for the site's regional freeze protection; factory concentrate is rated to roughly -50C undiluted. |
| Fuel tank | 4,542 L (1,200 US gal) | No. 2-D diesel fuel to ASTM D975 or the regional equivalent. Switch to a winter-grade or blended fuel in cold ambient conditions to avoid waxing/gelling. |
| Hydraulic system (hoist/brake circuit) and tank | 946 L (250 US gal) | Komatsu Genuine Hydraulic Oil, mineral-base anti-wear type (ISO VG46 class). Grade selected by ambient temperature range at the operating site. |
| Steering system (separate reservoir) | 901 L (238 US gal) | Same Komatsu Genuine Hydraulic Oil specification used in the main hydraulic system. |
| Wheel motor final drive gear case (each side) | 38 L (10 US gal) per side - this figure is not corroborated across independent sources for this exact serial range; verify against the site's own OMM copy before ordering bulk fluid | Komatsu Genuine Powertrain/Gear Oil (TO-series). Grade selected by ambient temperature. |
| Chassis grease points (pins, bushings, king-pins, etc.) | No bulk reservoir - applied per grease fitting on the periodic lubrication schedule | Komatsu Genuine Grease G2-LI, lithium EP multipurpose grease, NLGI 2, effective roughly -20C to +120C. Switch to an arctic-grade grease below -20C. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Komatsu AFE32-AA(830E S/N 31807 MT. THORLEY) maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 8,000 h |
|
Servicing the AFE32-AA(830E S/N 31807 MT. THORLEY) beyond the schedule
Predictive Maintenance & Fluid Analysis
The SDA16V160 engine on chassis 31807 runs full mechanical governance with no ECM datalogging, so oil condition on this DC-drive 830E has to be trended by hand: sample engine oil, wheel-motor gear oil, and hydraulic tank oil on a fixed hour cycle and log wear-metal trends yourself. Use the Statex III control panel to watch wheel-motor, exciter, and static converter temperatures each shift, and add periodic brush and commutator wear checks on the GE DC traction motors before wear becomes a road failure.
Corrective & Common Repairs
Expect wheel-motor brush and commutator wear as the top recurring fault on this DC drive; regrooving or replacing brushes early avoids flashover damage to the GE motors. Cracked or disconnected blower ducting to the final drive housings lets coal dust into the motor cavity and accelerates that wear. Watch for HYDRAIR strut nitrogen/oil leakdown, hoist-cylinder rod seal weeping, and parking-brake disc-pack wear at the wheel-motor rotor shaft. Retarder grid resistor faults show up as reduced dynamic braking on grade.
Overhaul & Rebuild Points
Plan wheel-motor rebuilds around commutator turning, brush-rigging renewal, and bearing replacement well before end of brush life; this is the major recurring rebuild item on a DC-drive 830E that later AC trucks don't carry. Engine overhaul at this hour range covers injector and turbocharger renewal on the SDA16V160 top end. Rebuild final-drive planetary sets and reseal HYDRAIR struts on the same cycle, and inspect the GE alternator/rectifier cabinet and hoist-cylinder pins for wear at every major teardown.
Seasonal & Environment Servicing
This chassis worked open-cut coal at Mount Thorley in the Hunter Valley, where fine coal dust is the main enemy: check blower-to-final-drive ducting and alternator/exciter cooling screens more often in dry, dusty conditions to stop abrasive dust reaching the DC motor commutators. In the region's wet season, check HYDRAIR strut seals and hoist-cylinder rods for water ingress and confirm brake and retarder cooling oil stays free of moisture. Summer heat loads the retarder grids and engine cooling package hardest.
AFE32-AA(830E S/N 31807 MT. THORLEY) common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| PB7001 | Filter, Air (See Fig 55436) | Air intake service | Check fitment → |
| PB5066 | Panel, Filter (See Following Pg) | Scheduled service item | Check fitment → |
| TY8242 | Harness - (Rectifier To Filter Panel) | Scheduled service item | Check fitment → |
| PB6999 | Filter, Hoist High Pressure Assembly | Scheduled service item | Check fitment → |
| PB7023 | Element, 7 Micron | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AFE32-AA(830E S/N 31807 MT. THORLEY) fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 01 | Low-level ground fault on the propulsion system | Leakage current to truck chassis above roughly 114 mA, often from moisture or contamination in the retard grid box or high-voltage cable compartments | Inspect retard grid enclosure and HV cable runs for water or debris intrusion; dry and check insulation before returning the truck to service |
| 02 | High-level ground fault on the propulsion system | Leakage current to chassis above roughly 400 mA, a more severe insulation breakdown than the low-level fault | Shut down and inspect traction alternator, wheel motor, and HV cable insulation immediately; do not return to service until the fault is cleared |
| 11 | GF (ground fault) contactor command and feedback disagree | Contactor stuck, coil failure, or feedback auxiliary contact fault in the ground-fault protection contactor | Check GF contactor coil, linkage, and feedback contacts in the propulsion control cabinet; confirm full travel on command |
| 12 | MF (main field) contactor command and feedback disagree | Main field contactor not responding to command; worn contacts, linkage binding, or feedback switch misadjustment | Inspect main field contactor mechanical operation and feedback switch alignment in the propulsion cabinet |
| 13 | P1 (propel) contactor command and feedback disagree | Propel contactor out of position from contact wear, coil trouble, or a misadjusted feedback switch | Inspect P1 contactor for correct travel and feedback switch operation; test coil and control wiring |
| 17 | RP1 (retard grid step) contactor command and feedback disagree | First retard grid contactor stuck or its feedback switch out of adjustment | Inspect RP1 contactor and retard grid circuit; verify contactor travel and feedback switch setting |
| 26 | Forward coil (reverser) command and feedback disagree | Reverser coil or linkage not shifting to the forward position as commanded | Check reverser forward coil, linkage, and position feedback switch for correct operation |
| 45 | Diode fault - ripple current in the traction alternator field circuit exceeds the preset limit | Failed or shorted rectifier diode in the alternator field/exciter circuit | Test alternator field rectifier diodes and replace any that read shorted or open |
| 46 | Motor 1 (wheel motor) armature overcurrent | Armature current above the preset limit from a stalled or overloaded motor, worn brushes, or a control feedback fault | Check wheel motor 1 armature and brushes, and inspect the final drive for mechanical binding |
| 50 | Motor stall - wheel motor stalled with current above roughly 1000 A on an inverse-time trip | Truck stuck or spun out, or a wheel motor/final drive seized, preventing rotation under load | Free the truck and inspect the affected wheel motor and final drive for mechanical seizure before resuming propulsion |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AFE32-AA(830E S/N 31807 MT. THORLEY) attachments & work tools
Dump body / tray
Rear-dump body only, with a spring-assisted, hydraulically-released tailgate on a rock or general-purpose profile. Heaped capacity for this size class runs roughly 147-158 m3 (192-207 cu yd) and rated payload around 220-231 t (242-255 st), varies by configuration/series. Wear-liner packages (steel or composite) are matched to site material rather than a single fixed fitment.
Tires & rims
40.00R57 radial (or 40.00-57 bias) OTR tires on multi-piece flange-mount rims are the standard fitment for this size class. Both radial and bias-ply casings, in several tread and compound options, are offered to suit haul-road and underfoot conditions.
Braking / retarding
Four-wheel, hydraulically actuated dry-disc service brakes are standard. Electric dynamic retarding through the rear wheel motors backs up service braking on sustained grades, with a spring-applied multiple-disc parking brake.
Suspension & steering
Front and rear ride on nitrogen-over-oil strut-type suspension cylinders, with double-acting hydraulic steering on an articulated front axle. As a rigid-frame rear-dump haul truck it has no quick-coupler or work-tool mounting interface like a loader or dozer.
Operator guarding
Cab is built to a ROPS/FOPS-rated structure as standard for this truck class. Site-fit screens or guards over the radiator and lighting are common practical additions in rock-handling service, but are not confirmed as a factory line item for this specific serial.
Payload & health monitoring
Factory instrumentation includes an onboard payload meter and machine health/diagnostic monitoring. Exact branding varies by generation, and camera/radar all-around monitoring is a later-series feature, not confirmed for this 1996-build DC-drive unit.
Automatic lubrication
A centralized automatic lubrication system, feeding chassis and suspension points from a ground-level fill point, is commonly offered as a factory or dealer-fit option across this truck class.
Fire suppression
Manual or automatic engine-bay fire suppression plus a handheld extinguisher is offered as a factory or dealer-fit option common to ultra-class haul trucks of this size; treat as site-specified rather than universal standard.
All AFE32-AA(830E S/N 31807 MT. THORLEY) assemblies by section
Every catalogued assembly group for the Komatsu AFE32-AA(830E S/N 31807 MT. THORLEY). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air System
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Air Compressor Assembly (Ve1055)
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 6 |
| C***2 | Capscrew - 3/8" - 16nc X 2 3/4" | 6 |
| R***8 | Plug, Pipe | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Air Compressor Piping
| CD***19 | Clamp, Worm Drive (1) (Qty 1) (2) | 2 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 5 |
| C***7 | Flat Washer - 3/8" (Attaches With #31 Undercab) | 5 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Air Governor Valve Assm (Vw5504)
| C***0 | Nut - 1/4" - 20nc (1) - Qty 100 (2) | 1 |
| RK***82 | Note: (1) Included In Rk1182 Repair Kit | 0 |
| SH***21 | Plug, Pipe | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Air Starter Assembly (Pb4988)
| DF***42 | Flatwasher, Plain - 3/4" | 5 |
| H***2 | Plug - 3/8" | 3 |
| TD***31 | Ring, Internal Retainer | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Air Starter Piping
| C***5 | Lockwasher - 7/16" | 2 |
| C***0 | Capscrew - 1/4" - 20nc X 1 3/4" | 2 |
| C***8 | Flat Washer - 7/16" | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Air System Piping & Instl
| C***3 | Nut - 1/2" - 13nc (G5) | 5 |
| C***1 | Capscrew - 1/2" - 13nc X 3/4" (4) | 2 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 5 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Air Tank Drain Valve Assm (Pb4774)
| H***5 | Capscrew - 1/4" - 20nc X 3/4" (Socket Head) | 3 |
| R***6 | Reducer, Pipe | 1 |
| RK***99 | Note: (1) Included In Rk1899 Repair Kit | 0 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Crankcase & Shaft (Ve1265)
| RK***88 | Note: (1) Included In Rk1388 Unloader Kit | 0 |
| SP***40 | Seat, Unloader Spring | 2 |
| SR***06 | Ring, Back-Up (1) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Horn Installation
| C***0 | Nut, Hex (Grab Handle) | 1 |
| C***8 | Lockwasher - 5/16" | 1 |
| H***2 | Fitting, Pipe | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Air System : Solenoid, Valve - 24v (Vz3502)
| VS***15 | Spring, Plunger | 1 |
| VZ***78 | Sleeve Assembly | 1 |
| VZ***79 | Housing - Eh & Mtg - Gd - 24v | 1 |
Body Group
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Body Group : Body & Body Pivot
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 4 |
| C***2 | Capscrew - 1/2" - 13nc X 1.00 | 6 |
| TR***43 | Nut - 1/2" - 13nc (1)/(2) | 32 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Body Group : Body Cable Sling Installation
| EB***68 | Cable, Sling Assm (1) | 1 |
| TZ***62 | Ear, Rear Body | 1 |
| TZ***61 | Ear, Housing Axle | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Body Group : Body Position Indicator
| DC***79 | Clamp, Indicator Hose | 1 |
| TB***18 | Plate W/ Hose Stem | 1 |
| WA***67 | Hose | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Body Group : Body-Up Lock Pin Installation
| C***5 | Nut - 5/8" Unc (G5) | 1 |
| PB***46 | Pin, Klik | 1 |
| TY***18 | Lock Pin, Body-Up | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Body Group : Mud Flap Installation
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 24 |
| C***0 | Lockwasher, High Collar - 1/2" | 9 |
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 146 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Body Group : Mud Flap Installation - 2
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 18 |
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 18 |
| TZ***42 | Flap, Mud | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Body Group : Rear Mudflap Installation
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 12 |
| C***7 | Flat Washer - 3/8" (Attaches With #31 Undercab) | 4 |
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 14 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Body Group : Rock Ejectors Installation
| C***8 | Pin, Cotter - 5/16" X 3.00 | 2 |
| TY***06 | Arm, Rock Ejector (1) | 2 |
| TY***04 | Bracket | 2 |
Cab Group
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Air Conditioner Piping & Instl
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 7 |
| C***5 | Lockwasher - 7/16" | 4 |
| C***9 | Capscrew - 7/16" - 14nc X 1-1/2" | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Cab Assembly
| C***0 | Lockwasher, High Collar - 1/2" | 16 |
| C***6 | Capscrew - 1/2" - 13nc X 1 3/4" | 16 |
| DD***40 | Flat Washer - 1/2" (2) | 12 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Cab Assembly - 2
| C***0 | Lockwasher, High Collar - 1/2" | 10 |
| C***8 | Lockwasher - 5/16" | 2 |
| C***8 | Capscrew - 5/16" - 18nc X 1" (2) | 11 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Cab Door Linkage
| VS***21 | Lock W/ 2 Keys | 1 |
| VE***35 | Rod, L.H. - 8 1/8" | 1 |
| VS***59 | Key (Ch502) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Condenser Mounting Assembly
| C***5 | Capscrew - 1/2" - 13nc X 1 3/4" (G5) | 4 |
| C***3 | Capscrew - 1/2" - 13nc X 11 1/4" (2) | 6 |
| DD***40 | Flat Washer - 1/2" (2) | 12 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Door Assembly - L.H. (Ve6685)
| SP***17 | Flat Washer - 1/4" - 20nc | 4 |
| SD***35 | Lockwasher - 1/4" (Internal Tooth) | 2 |
| SG***07 | Lockwasher - #10 (Internal Tooth) | 8 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Door Assembly - R.H. (Ve6684)
| SD***35 | Lockwasher - 1/4" (Internal Tooth) | 14 |
| SH***97 | Bolt, Hex Head - 1/4" - 20, 1/2" Long | 22 |
| TD***94 | Capscrew - 5/16" - 18nc X 3/4" | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Door Linkage & Sliding Window
| RK***66 | Kit, Weather Strip | 1 |
| TK***68 | Glass & Channel Kit (Front) | 1 |
| TK***65 | Glass & Channel Kit (Rear) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Driver'S Seat Assembly - 1 (Pb7839)
| VE***91 | Armrest, Left | 1 |
| VE***51 | Armrest Set | 1 |
| VE***66 | Frame, Backrest | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Driver'S Seat Assembly - 2 (Pb7839)
| VE***77 | Slide, Master | 1 |
| VE***75 | Handle, Backrest | 1 |
| VE***62 | Kit, Slide (1) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Driver'S Seat Assembly - 3 (Pb7839)
| VE***59 | Kit, Air Lumbar Valve | 1 |
| VE***74 | Spring, Backrest Lever | 1 |
| VE***86 | Plate, Tooth | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Driver'S Seat Assembly - 4 (Pb7839)
| VE***89 | Bushing | 8 |
| VE***87 | Snap Ring, Swivel Bottom | 4 |
| VE***65 | Bushing, Slider | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Driver'S Seat Assembly - 5 (Pb7839)
| VE***81 | Kit, Shock Absorber | 1 |
| VE***83 | Axle | 2 |
| VE***62 | Kit, Air Spring | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Heater & Air Conditioner Controls
| HC***08 | Clamp, Worm Drive (At Heater) | 2 |
| JG***67 | Block | 1 |
| JG***68 | Rod, Threaded | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Heater Piping & Installation
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 4 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 4 |
| DF***91 | Clamp - 2 1/2" | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Instrument Panel
| CH***05 | Light Insert | 1 |
| CH***03 | Light Insert | 1 |
| CH***06 | Light Insert | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Operator'S Seat Installation
| EB***90 | Tube (Seat Spacer) | 2 |
| PB***40 | Belt Set (Tether) | 1 |
| PB***39 | Seat Driver (See Index) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Passenger Seat Installation
| 48***57 | Belt, Seat | 1 |
| PB***25 | Seat, Passenger | 1 |
| SC***74 | Lockwasher - 5/16" (6) | 8 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Shift Console Installation
| DL***85 | Machine Screw - #8 - 32nc X 1/4" | 1 |
| H***5 | Capscrew - 5/16" - 18nc X 2 1/4" | 3 |
| PB***93 | Valve, Remote Control | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Windshield Washer Installation
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 10 |
| SP***17 | Flat Washer - 1/4" - 20nc | 6 |
| TD***49 | Nut, Hex - 1/4" - 20nc (Zinc Pl) | 6 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cab Group : Windshield Wiper Installation
| PB***23 | Wiper Blade, Windshield (See Windshield Wiper Pg) | 1 |
| PB***24 | Arm, Wiper (See Windshield Wiper Page) | 1 |
| PB***69 | Motor, Windshield Wiper (See Windshield Wiper Pg) | 1 |
Cooling System
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cooling System : Fan & Fan Drive
| C***0 | Lockwasher, High Collar - 1/2" | 6 |
| PB***11 | Belt, Fan | 1 |
| PB***14 | Fan - 68.00" | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cooling System : Fan Guard
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 6 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 12 |
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 6 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cooling System : Radiator & Surge Tank Instl
| C***5 | Nut, Jam - 1" - 8nc | 2 |
| C***0 | Lockwasher, High Collar - 1/2" | 8 |
| C***2 | Nut (Special) | 6 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cooling System : Radiator & Surge Tank Piping
| C***1 | Plug, Pipe (3) (Qty.1 (4)) | 2 |
| CD***07 | Clamp (Top & Bottom Connections) | 2 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 8 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Cooling System : Radiator Assembly (Ya2099)
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 38 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 26 |
| C***8 | Nut - 3/4" - 16nf | 12 |
Deck Piping Group
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Accumulator Assembly
| PB***57 | Accumulator - 1 Gallon (See Fig 40016) | 1 |
| PB***58 | Accumulator - 2.5 Gallon (See Fig 40016) | 1 |
| TV***48 | Nut, Stop (2) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Brake Cabinet Assembly (Eb6688)
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 4 |
| C***0 | Nut - 1/4" - 20nc (1) - Qty 100 (2) | 2 |
| C***6 | Capscrew - 3/8" - 16nc X 2" | 6 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Brake Cabinet Assembly - 2 (Eb6688)
| C***0 | Nut - 1/4" - 20nc (1) - Qty 100 (2) | 2 |
| C***5 | Capscrew - 1/4" - 20nc X 5/8" (1) | 2 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 8 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Brake Cabinet/Cab Piping
| CC***92 | Fitting, Pipe | 1 |
| EB***88 | Brake Cabinet Assm (See Index) | 1 |
| HA***94 | Hose - To Control Cabinet Air Supply Coupling | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Brake Manifold - Two Circuit (Pb7565)
| RK***17 | Note: (1) Not Svcd Separtely. Use Rk0217 Seal Kit | 1 |
| VE***79 | Valve, Pressure Reducing | 1 |
| VE***77 | Valve, Needle | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Brake Treadle Valve Assm (Pb8050)
| VE***30 | Flat Washer - 1/4" | 4 |
| VE***25 | Treadle Valve Assm (1) | 1 |
| VE***43 | Allen Bolt - 1/4" - 20nc | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Brake Treadle Valve Piping
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 4 |
| HA***98 | Hose - Port "P2" | 2 |
| HA***59 | Hose - Return Port "T" | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Dual Controller Assembly
| VE***80 | Seal, Upper (3) | 1 |
| VE***49 | Tie Rod Assm, Actuator (4) | 1 |
| VE***62 | Shim Kit | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Electronic Treadle - Retarder/Throttle
| PB***87 | Electronic Treadle - Throttle (See Fig. 14759) | 1 |
| PB***88 | Electronic Control - Retarder (See Fig. 14759) | 1 |
| VE***22 | Screw - Round Head (1) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Hoist Pilot Valve Assm (Pb6922)
| VJ***57 | Capscrew | 2 |
| VJ***64 | Pin, Detent | 1 |
| VJ***61 | Spring | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Pressure Reducing Manifold Valve (Pb7054)
| RK***17 | Note: (1) Not Svcd Separtely. Use Rk0217 Seal Kit | 0 |
| TF***44 | O-Ring - Housing | 1 |
| VE***18 | Manifold (1) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Solenoid Valve Assembly (Pb7369)
| RK***59 | Note: (1) Included In Rk0259 Seal Kit | 1 |
| VE***95 | Coil, Solenoid | 1 |
| VE***30 | Housing, Coil | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Steering Control Valve Piping
| HA***04 | Hose | 1 |
| HA***96 | Hose (1) | 1 |
| HA***57 | Hose | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Deck Piping Group : Throttle & Retarder Instl
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 2 |
| DC***79 | Screw, Slotted Flat Head - #10-32, 5/8" Long | 2 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 2 |
Electric Power Components & Wiring Group
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Blower Inlet Installation
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 4 |
| C***7 | Nut - 3/4" - 10nc | 4 |
| C***6 | Capscrew - 3/4" - 10nc X 2-1/2" | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Blower Inlet Wiring
| CH***42 | Cable (T3) (Alternator To Rectifier-Rd1) | 1 |
| CH***57 | Cable - 7ga2 (Rectifier To P1 Contactor) | 1 |
| CH***41 | Cable (T2) (Alternator To Rectifier-Rd1) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Blown Grid Module
| C***4 | Capscrew - 3/4" - 10nc X 5 1/2" (R.H.) | 4 |
| C***9 | Capscrew - 5/16" - 18nc X 2" | 3 |
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Blown Grid Module - 2
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 8 |
| EB***03 | Strip, Rubber (Use With Suffix Dn Only) | 2 |
| EB***02 | Channel | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Blown Grid Module - 3
| CH***08 | Cable - 7j18 (Rp4 Contactor To Blown Grid) | 1 |
| CH***03 | Cable - 7j7 (Rp2 Contactor To Blown Grid) | 1 |
| CH***10 | Cable - 7j32 (Rp5 Contactor To Blown Grid) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Cabinet Pressure Control
| TG***20 | Capscrew - 3/8" - 16nc X 1.00 (G5) (Zinc) | 8 |
| TW***54 | U - Clamp | 2 |
| TC***31 | Lockwasher - 3/8" (Qty 3 (4)) | 8 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Assembly
| DB***44 | Relay (See Hydraulic Service Brake Application Pg) | 1 |
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 8 |
| DL***41 | Strip, Insulation | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Assembly - 2
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 5 |
| DF***17 | Nut - #10 - 24nc (Brass) | 4 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Assembly - 3
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 30 |
| DF***17 | Nut - #10 - 24nc (Brass) | 42 |
| EB***61 | Sheet, Insulation | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Assembly - 4
| DF***17 | Nut - #10 - 24nc (Brass) | 2 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 4 |
| EB***36 | Retard/Propulsion Interface Box (See Index) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Assembly - 5
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 6 |
| DF***17 | Nut - #10 - 24nc (Brass) | 4 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 20 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Assembly - 6
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 2 |
| EB***83 | Bar, Buss | 2 |
| HA***22 | Hose (To Thermostat Housing) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Wiring
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 4 |
| EB***36 | Retard/Propulsion Interface Box (See Index) | 1 |
| EB***94 | Cable - 720-72f | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Wiring - 2
| DL***50 | Plate, Identification | 1 |
| HC***47 | Sleeve, Heat Shrink | 1 |
| HC***43 | Terminal, Knife Disconnect | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Wiring - 3
| EB***85 | Bar, Bus - Rp1/Rp2 - L.T | 1 |
| EB***59 | Bar, Bus - Rp2/Rp1 | 1 |
| HC***47 | Sleeve, Heat Shrink | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Wiring - 4
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 1 |
| DL***50 | Plate, Identification | 1 |
| DF***17 | Nut - #10 - 24nc (Brass) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Wiring - 5
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 8 |
| EB***66 | Plate, Name (Tb22) | 1 |
| EB***84 | Harness, Cabinet | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Wiring - 6
| EB***84 | Harness, Cabinet | 1 |
| EB***93 | Cable - 72t/72s | 1 |
| EB***92 | Cable - 72w/72y | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Control Cabinet Wiring - Rear
| CH***60 | Cable - 7j10 (P2 Contactor To Left Wheel Motor) | 1 |
| CH***62 | Cable - 7j1l (Control Cabinet To Left Wheel Motor) | 1 |
| CH***61 | Cable - 7j1r (S2 Load Test Box To Right Wheel Motor) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Electric Power Components Wiring
| C***4 | Capscrew - 3/4" - 10nc X 5 1/2" (R.H.) | 4 |
| CH***60 | Cable - 7j10 (P2 Contactor To Left Wheel Motor) | 1 |
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Load Test Installation
| CH***55 | Cable - 7j18 (Load Test To Control Cabinet) | 1 |
| CH***54 | Cable - 7j1ls (Test Links To Load Test Box) | 1 |
| CH***53 | Cable - 7j1rs (Test Links To Load Test Box) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Motor Shunt Installation
| CH***55 | Cable - 7j18 (Load Test To Control Cabinet) | 1 |
| C***8 | Capscrew - 3/8" - 16nc X 3-1/4" | 1 |
| CH***54 | Cable - 7j1ls (Test Links To Load Test Box) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Pressure Regulator (Vy7272)
| PB***64 | Pressure Regulator | 1 |
| RK***78 | Note: (1) Included In Rk1278 Repair Kit | 0 |
| VS***03 | Jam Nut | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Rcp/Acc Interface Box Assm (Eb2636)
| DD***67 | Machine Screw - #6 - 32nc X 3/4" | 4 |
| DF***77 | Machine Screw - #6 - 32nc X 1 1/4" | 4 |
| EB***45 | Cover, Filter | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electric Power Components & Wiring Group : Terminal Block Panel Assm (Ty9891)
| H***3 | Screw With Lockwashers - #10-32, 3/8" Long | 6 |
| PB***32 | Strip, Terminal | 3 |
| SC***17 | Flat Washer - #10 | 6 |
Electrical System
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Axle Housing Electrical Group
| 72***62 | Clamp, Vinyl - 5/16" I.D | 1 |
| C***0 | Nut - 1/4" - 20nc (1) - Qty 100 (2) | 4 |
| C***5 | Capscrew - 1/4" - 20nc X 5/8" (1) | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Axle Housing Portable Light (Ty1408)
| 72***62 | Clamp, Vinyl - 5/16" I.D | 1 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 1 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Battery Equalizer Box Assm (Eb3105)
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 8 |
| DL***71 | Grommet, Rubber | 5 |
| DF***17 | Nut - #10 - 24nc (Brass) | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Brake Cabinet/Cab Wiring
| SP***17 | Flat Washer - 1/4" - 20nc | 4 |
| TZ***02 | Harness | 1 |
| TC***31 | Lockwasher - 3/8" (Qty 3 (4)) | 10 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Electrical Compartment - 24 Volt
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 18 |
| DF***17 | Nut - #10 - 24nc (Brass) | 8 |
| EB***50 | Harness | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Electrical Compartment - 24 Volt - 2
| C***0 | Nut, Hex (Grab Handle) | 4 |
| C***8 | Lockwasher - 5/16" | 4 |
| C***7 | Capscrew - 5/16" - 18nc X 3/4" With Lockwasher | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Head & Fog Lights
| AK***19 | (3) Included In Ak1019 Fog Light Assm - Optional | 2 |
| AK***30 | Bulb - Light - 24v/60w (1)/(2)/(3)/(4) | 2 |
| AK***31 | Flange Assm (1)/(2)/(3)/(4) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Hoist Limit & Body-Up Interlock Switch
| DC***01 | Lockwasher - #10 - 24nc X 5/8" | 4 |
| DF***17 | Nut - #10 - 24nc (Brass) | 4 |
| PB***07 | Switch, Proximity (See Tail Light Wiring Fig. 30554) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Left Upright Electrical Group
| AK***27 | (4) Included In Ak1027 Service Light Assm | 2 |
| AK***30 | Bulb - Light - 24v/60w (1)/(2)/(3)/(4) | 3 |
| AK***31 | Flange Assm (1)/(2)/(3)/(4) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Left Upright Electrical Group - 2
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 1 |
| DC***84 | Lockwasher - 1/4" (Zinc Pl) | 4 |
| HE***67 | Machine Screw - #6 - 32nc X 1/2" (2) | 8 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Power Module Wiring
| AK***19 | (3) Included In Ak1019 Fog Light Assm - Optional | 2 |
| AK***27 | Note: (1) Included In Ak1627 Headlight Assm Low Beam 24 V | 2 |
| AK***28 | (2) Included In Ak1628 Headlight Assm - Hi Beam 24 V | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Rear Light Assembly
| AK***22 | Note: (1) Included In Ak1022 Backup Light Assm | 2 |
| AK***24 | Light Assembly - Turn/Clearance (See Fig 35395) | 2 |
| AK***26 | (3) Included In Ak1026 Tail & Stop Light Assm | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Rear Lights & Backup Horn
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 1 |
| 72***62 | Clamp, Vinyl - 5/16" I.D | 2 |
| AK***22 | Note: (1) Included In Ak1022 Backup Light Assm | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Rear Turn & Clearance Lights
| AK***31 | Flange Assm (1)/(2)/(3)/(4) | 2 |
| AK***41 | Universal Housing Assm (1)/(2)/(3) | 2 |
| AK***43 | Ring, Rubber (1)/(2)/(3)/(4) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Right Deck Electrical Group
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 3 |
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 3 |
| C***9 | Capscrew - 5/16" - 18nc X 2" | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Right Upright Electrical Group
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 7 |
| AK***27 | (4) Included In Ak1027 Service Light Assm | 2 |
| AK***30 | Bulb - Light - 24v/60w (1)/(2)/(3)/(4) | 3 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Electrical System : Two-Speed Retarding Installation
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 10 |
| PB***65 | Switch, Pressure | 2 |
| TC***31 | Lockwasher - 3/8" (Qty 3 (4)) | 10 |
Engine Group
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Air Cleaner Assembly (Pb6850)
| VS***90 | O-Ring (1) | 3 |
| VS***93 | Gasket (1) | 2 |
| VJ***28 | Body, Lower | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Air Cleaner Indicator Piping
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 8 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 8 |
| PB***82 | Gauge, Air Cleaner Vacuum (See Instrument Panel Pg) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Air Cleaner Piping
| C***8 | Plug, Pipe - 1/8" | 2 |
| C***1 | Lockwasher - 5/8" (3)/(4) | 26 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 12 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Battery Charging Alternator (Pb6876)
| VE***26 | Bearing, Roller | 1 |
| VE***20 | Bearing, Front | 1 |
| VE***21 | Inner Race, Rear Bearing | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Engine & Miscellaneous Instl
| C***1 | Nut, Jam - 5/8" - 18nf (R.H. Thread) | 6 |
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 18 |
| C***4 | Capscrew - 3/4" - 10nc X 2" (2) | 6 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Engine Exhaust Piping (Eb5825)
| C***3 | Nut - 1/2" - 13nc (G5) | 16 |
| C***7 | Capscrew - 1/2" - 13nc X 2-1/4" | 16 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 20 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Engine Oil Pressure Piping
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 1 |
| DL***60 | Fitting, Elbow - 90 Deg (At Drive Axle Pivot Pin) | 1 |
| HA***92 | Hose | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Heated Body Exhaust
| C***3 | Nut - 1/2" - 13nc (G5) | 16 |
| C***7 | Capscrew - 1/2" - 13nc X 2-1/4" | 16 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 22 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Heated Body Exhaust - 2
| C***3 | Nut - 1/2" - 13nc (G5) | 6 |
| C***5 | Capscrew - 1/2" - 13nc X 1 3/4" (G5) | 8 |
| C***0 | Lockwasher, High Collar - 1/2" | 16 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Engine Group : Variable Speed Fan Clutch (Ve3712)
| TH***03 | Ring, Seal (1)/(2)(4) | 2 |
| VE***93 | End Cap (4) | 1 |
| VE***88 | Ring, Seal (1)/(2)(4) | 1 |
Frame Group
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : Access Ladder & Step Installation
| C***4 | Capscrew - 3/4" - 10nc X 2" (2) | 4 |
| C***1 | Capscrew - 3/8" - 16nc X 16nc X 3/4" | 6 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 6 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : Deck Sections & Safety Walk
| C***5 | Capscrew - 3/4" - 10nc X 1 1/2" (For Shipping Only) | 6 |
| C***4 | Capscrew - 3/4" - 10nc X 5 1/2" (R.H.) | 9 |
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 12 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : Frame & Uprights
| C***7 | Capscrew - 1" - 8nc X 2-1/2" | 16 |
| C***5 | Nut - 5/8" Unc (G5) | 12 |
| C***6 | Capscrew - 3/4" - 10nc X 2-1/2" | 36 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : Grille, Hood & Handrail
| C***8 | Capscrew - 3/4" - 10nc X 3" (G5) | 8 |
| C***9 | Capscrew - 5/16" - 18nc X 2" | 2 |
| C***2 | Lockwasher - 3/4" (For Shipping Only) | 14 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : Left Deck, Handrail & Ladder
| AK***12 | Mirror, Convex (See Fig 30460) | 1 |
| C***5 | Capscrew - 3/8" - 16nc X 1 3/4" (L.H. Side) | 10 |
| C***7 | Capscrew - 3/4" - 10nc X 5 1/2" (R.H.) | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : Left Deck, Handrail & Ladder - 2
| C***5 | Capscrew - 5/8" - 18nc X 3 1/4" | 4 |
| C***9 | Flat Washer - 1/2" (Plain) | 17 |
| C***0 | Flat Washer - 5/8" | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : Mirror Installation
| AK***12 | Mirror, Convex (See Fig 30460) | 1 |
| C***2 | Lockwasher - 3/8" | 4 |
| C***4 | Capscrew - 3/8" - 16nc X 1 1/2" (Cab Mounting) (1) | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : R.H. Hand Convex Mirror Instl
| C***3 | Capscrew - 3/8" - 16nc X 1-1/4" G5 (1) | 4 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 2 |
| C***8 | Lockwasher - 5/16" | 8 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : Right Deck, Handrail & Deck
| C***0 | Lockwasher, High Collar - 1/2" | 20 |
| C***2 | Capscrew - 1/2" - 13nc X 1.00 | 20 |
| DD***40 | Flat Washer - 1/2" (2) | 12 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Frame Group : Right Deck, Handrail & Ladder
| C***5 | Capscrew - 3/8" - 16nc X 1 3/4" (L.H. Side) | 4 |
| C***5 | Capscrew - 5/8" - 18nc X 3 1/4" | 4 |
| C***1 | Lockwasher - 5/8" (3)/(4) | 4 |
Front Wheel & Brake Group
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Front Wheel & Brake Group : Front Brake Piping
| 42***43 | Clamp, Vinyl - 3/8" I.D. (Inside R.H. Frame Rail) | 4 |
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 4 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 8 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Front Wheel & Brake Group : Front Disc Brake Assembly (Pb7362)
| TX***48 | Disc (See Spindle, Hub & Brake Pg) | 2 |
| VE***93 | Bleeder Screw (Opposite Side Of Caliper From #14) (3)/(4) | 2 |
| VS***65 | Lining, End Plate - R.H. (2)/(3)/(4) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Front Wheel & Brake Group : Front Lubrication Group
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 14 |
| C***8 | Capscrew - 3/8" - 16nc X 3-1/4" | 4 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 14 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Front Wheel & Brake Group : Front Suspension & Mounting
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 2 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 2 |
| H***1 | Ball, Steel - 3/4" (1) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Front Wheel & Brake Group : Front Wheel & Mounting
| AK***45 | Band, Bead Seat - 57" | 1 |
| AK***49 | Lock Ring - 57" | 1 |
| AK***28 | Flange, Side - 1" X 6.00" | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Front Wheel & Brake Group : Spindle, Hub & Brake Installation
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 1 |
| C***0 | Lockwasher, High Collar - 1/2" | 8 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 1 |
Fuel System
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Fuel System : Engine Fuel Piping
| C***9 | Plug, Pipe - 1/4" | 1 |
| C***1 | Plug, Pipe (3) (Qty.1 (4)) | 2 |
| C***3 | Nut - 1/2" - 13nc (G5) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Fuel System : Fuel Tank Installation
| C***3 | Nut - 1/2" - 13nc (G5) | 7 |
| CC***07 | Lockwasher - 5/8" (Internal Tooth) | 4 |
| C***4 | Lockwasher - 1" (1) | 4 |
Hydraulic System
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Hoist Control Valve Assm (Pb6921)
| RK***02 | (3) Included In Rk2202 Minor Service Kit | 0 |
| RK***03 | (2) Included In Rk2203 Major Service Kit | 0 |
| VJ***88 | Poppet | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Hoist Cylinder & Mounting
| C***5 | Capscrew - 3/4" - 10nc X 1 1/2" (For Shipping Only) | 3 |
| PB***27 | Bearing, Spherical (2) | 1 |
| TX***64 | Plate, Locking (1) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Hoist Cylinder Assembly (Ty5936)
| 72***87 | Poppet, Ball | 2 |
| C***1 | Capscrew - 1/2" - 13nc X 3/4" (4) | 4 |
| EB***18 | Rod, Pivot | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Hoist Pump Assembly (Pb7943)
| TH***65 | Ball, Steel - 1/4" | 1 |
| VE***70 | Plate, Gear | 2 |
| VE***00 | Snap Ring (1)/(3) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Hoist Pump Installation
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Hoist System Piping
| C***5 | Lockwasher - 7/16" | 8 |
| C***9 | Capscrew - 7/16" - 14nc X 1-1/2" | 8 |
| C***9 | Capscrew - 1/2" - 13nc X 2 3/4" (3) | 8 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Hoist Valve & Cylinder Piping
| C***7 | Capscrew - 5/8" - 11nc X 3 3/4" (Use With Suffix Dq Only) | 3 |
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 2 |
| C***3 | Capscrew - 7/8" - 9nc X 3" | 3 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Hydraulic Tank Installation
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 52 |
| C***1 | Plug, Pipe (3) (Qty.1 (4)) | 2 |
| C***2 | Plug, Pipe - 1" | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Hydraulic Tank/Cabinet Piping
| C***6 | Capscrew - 3/8" - 16nc X 2" | 1 |
| C***2 | Capscrew - 1/2" - 13nc X 3 1/2" (2) | 4 |
| C***1 | Lockwasher - 5/8" (3)/(4) | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Spool Inlet Section (Ve3810)
| RK***02 | (3) Included In Rk2202 Minor Service Kit | 0 |
| RK***03 | (2) Included In Rk2203 Major Service Kit | 0 |
| VJ***83 | Plug | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Hydraulic System : Universal Joint Installation
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 16 |
| PB***61 | Alternator/Blower Assm (1) | 1 |
| PB***43 | Hoist Pump Assm (See Index) | 1 |
Options & Miscellaneous Group
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Air Intake Filtration Installation
| C***5 | Lockwasher - 7/16" | 6 |
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 23 |
| C***8 | Capscrew - 1/2" - 13nc X 7" | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Air Intake Filtration Installation - 2
| 82***65 | Stud - 3/8" - 16nc X 2" | 2 |
| C***5 | Capscrew - 3/8" - 16nc X 1 3/4" (L.H. Side) | 4 |
| C***1 | Capscrew - 3/8" - 16nc X 16nc X 3/4" | 20 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Automatic Lubrication System
| C***5 | Capscrew - 3/8" - 16nc X 1 3/4" (L.H. Side) | 4 |
| C***1 | Plug, Pipe (3) (Qty.1 (4)) | 1 |
| C***5 | Capscrew - 1/4" - 20nc X 5/8" (1) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Automatic Lubrication System - 2
| C***1 | Coupling, Pipe (At Left Front Of Anti-Sway Bar) | 9 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 16 |
| C***0 | Plug, Pipe - 3/8" | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Hydrair Charging Kit (Vd4665)
| HC***80 | Bushing, Pipe - 1/8" X 1/4" (At Body Pivot Pins) | 4 |
| PB***08 | Regulator, Nitrogen | 1 |
| SV***30 | Fitting, Straight | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Hydraulic Motor Assembly (Pb6585)
| SL***98 | Retainer, Ring (1)/(2) | 1 |
| VE***72 | Bushing | 4 |
| VE***81 | Seal, Oil | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Pressure Fueling - R.H. (Tx3576)
| C***4 | Lockwasher - 1/4" (1) - Qty 100 (2) | 6 |
| D***6 | Cap, Fuel (1)/(2) | 1 |
| HF***30 | Coupling, Half - 2" | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Service Center Installation (Bd0511)
| C***0 | Nut - 1/4" - 20nc (1) - Qty 100 (2) | 4 |
| CD***21 | Coupling, Pipe | 1 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 16 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Tool Group - International (Eb6678)
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Options & Miscellaneous Group : Wiggins Quick Fuel - L.H.
| C***1 | Capscrew - 1/4" - 20nc X 2" | 2 |
| D***6 | Cap, Fuel (1)/(2) | 1 |
| HF***30 | Coupling, Half - 2" | 1 |
Rear Wheel & Brake Group
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Drive Axle & Mounting
| C***4 | Capscrew - 3/4" - 10nc X 5 1/2" (R.H.) | 8 |
| C***1 | Lockwasher - 5/8" (3)/(4) | 5 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Drive Axle Blower Hose
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 4 |
| C***4 | Capscrew - 3/8" - 16nc X 1 1/2" (Cab Mounting) (1) | 4 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Drive Wheel Piping
| C***4 | Plug, Pipe - 1 1/4" | 1 |
| C***3 | Nut - 1/2" - 13nc (G5) | 2 |
| CD***07 | Clamp (Top & Bottom Connections) | 16 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Parking Brake Assembly (Pb7484)
| VE***11 | Spring | 8 |
| VE***33 | Boot (1)/(2)/(3) | 2 |
| VE***14 | Capscrew (1) / (2) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Rear Brake Piping
| C***3 | Nut - 1/2" - 13nc (G5) | 3 |
| C***0 | Lockwasher, High Collar - 1/2" | 3 |
| HA***45 | Hose - To R.H. Parking Brake | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Rear Disc & Parking Brake Instl
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 2 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 2 |
| C***1 | Nut - 3/8" - 16nc X 2 1/4" | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Rear Disc Brake Assembly (Pb7676)
| AK***71 | Kit, Tubing | 1 |
| SD***82 | Lockwasher - 5/16" (Internal Tooth) | 4 |
| TX***01 | Disc - 25" (See Rear Disc Brake Instl Pg) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Rear Hatch Cover Installation
| C***3 | Pin, Cotter | 2 |
| PB***06 | Latch/Keeper Set (Qty. 1 Back Of Cabinet) | 1 |
| SP***17 | Flat Washer - 1/4" - 20nc | 6 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Rear Suspension & Mounting
| C***1 | Lockwasher - 5/8" (3)/(4) | 4 |
| C***5 | Fitting, Drive Yoke Grease | 2 |
| CE***10 | Capscrew - 5/8" - 11nc X 3/4" (3) | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Rear Suspension Assembly (Tz9085)
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 12 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 11 |
| H***1 | Ball, Steel - 3/4" (1) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Rear Wheel & Brake Group : Rear Wheel & Mounting
| AK***45 | Band, Bead Seat - 57" | 2 |
| AK***49 | Lock Ring - 57" | 2 |
| AK***28 | Flange, Side - 1" X 6.00" | 4 |
Steering System
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Accumulator Assembly (Ty3541)
| C***5 | Lockwasher - 7/16" | 4 |
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 4 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 6 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Bleeddown Manifold Valve Assm (Pb6923)
| PB***57 | Switch, Pressure (Steering Pressure) | 1 |
| VE***31 | Valve, Manifold | 1 |
| VE***35 | Valve, Solenoid - N.C | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Flow Amplifier (Pb6908)
| VE***69 | Orifice | 1 |
| VE***55 | Screw, Allenhead | 2 |
| VE***62 | Plate | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Shut-Off Valve Assembly (Ty8353)
| C***3 | Nut - 1/2" - 13nc (G5) | 4 |
| C***3 | Capscrew - 1/2" - 13unc X 3 3/4" | 4 |
| C***0 | Lockwasher, High Collar - 1/2" | 4 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering Accumulator Installation
| PB***62 | Switch, Pressure | 1 |
| TN***99 | Guard | 1 |
| TY***41 | Accumulator Assembly (See Index) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering Arms & Linkage
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 8 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 8 |
| EB***70 | Steering Cylinder Assm (See Index) | 2 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering Column & Control Valve Instl
| MM***79 | Lockwasher - 5mm (External Tooth) | 2 |
| MM***50 | Screw, Machine - M5 X .8 X 16 (Pan Hd) | 2 |
| PB***46 | Button, Horn | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering Column Assembly (Pb6880)
| VE***10 | Capscrew - 3/8" - 24nf (1) | 4 |
| VE***06 | Lockwasher | 2 |
| VE***07 | Bracket, Mounting | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering Control Unit (Pb6905)
| MM***01 | Capscrew - M8 X 1.25 X 90 | 6 |
| VE***81 | Ball - 8.5 mm / 33/100" | 1 |
| VE***90 | Set, Gear Wheel | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering Cylinder Assembly (Eb0770)
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 16 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 16 |
| SL***48 | Seal, O-Ring (1) | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering Cylinder Piping
| C***2 | Capscrew - 3/8" - 16nc X 1" (Qty. 10 Not Included In Assm) | 3 |
| C***6 | Capscrew - 3/8" - 16nc X 2" | 4 |
| C***2 | Lockwasher - 3/8" (Qty. 10 Not Included In Assembly) | 28 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering Pump Assembly (Pb6729)
| VE***69 | Plug | 1 |
| VE***25 | Spacer | 1 |
| VE***52 | Shim - .010 | 0 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering Pump Assembly - 2 (Pb6729)
| VE***78 | Guide | 1 |
| VE***74 | Adaptor | 1 |
| VE***73 | Screw | 1 |
Komatsu : Afe32-Aa(830e S/N 31807 Mt. Thorley) : Steering System : Steering System Piping
| C***5 | Lockwasher - 7/16" | 19 |
| C***9 | Capscrew - 7/16" - 14nc X 1-1/2" | 16 |
| C***8 | Capscrew - 1/2" - 13nc X 7" | 2 |
AFE32-AA(830E S/N 31807 MT. THORLEY) serial number reference
On a Komatsu 830E, the PIN/serial data plate is mounted on the truck frame, typically on the frame rail near the front of the machine or inside the cab area, and shows the full model designation and the machine serial number stamped by the factory. The AFE code (for example AFE32-AA) is not stamped on the plate itself - it is Komatsu's internal engineering/order code used to key a specific customer-configured build to its parts catalog, and is found on the parts manual cover keyed to the machine's serial number rather than on the truck. Always match parts against the truck's actual stamped serial number, since one AFE code can cover a single machine or a short run built for one mine site.
| Prefix | Identifies | Notes |
|---|---|---|
| AFE32-AA | Komatsu 830E rigid dump truck (original DC-drive generation), single-unit factory build code | Covers exactly one chassis, serial number 31807, one of eleven Komatsu 830E DC-drive haul trucks delivered new in 1996 to the Mount Thorley (Mount Thorley Warkworth) coal mine in the Hunter Valley, New South Wales, Australia. This is the original GE DC-drive 830E generation, running under Statex III control with the Komatsu SDA16V160/SSDA16V160 mechanically governed diesel - not the later AC-drive 830E-AC/830E-1AC or the Cummins-powered 830E-5. Komatsu serviced this delivery batch under a maintenance contract through roughly 2009, after which the mine's own maintenance department took over. The parts catalog for this build code lists the model simply as 830E (US). This AFE code is a Komatsu engineering/order reference tied to one machine number, not a broad serial-number range; do not extend it to other AFE32-xx codes, which cover different customers and machine numbers. |
Frequently asked questions
What engine powers the Komatsu AFE32-AA (830E S/N 31807, Mount Thorley)?
A Komatsu SDA16V160/SSDA16V160, 16-cylinder, mechanically governed, turbocharged and aftercooled diesel rated at roughly 1,865 kW (2,500 hp) gross, driving a GE DC electric wheel-motor propulsion system under Statex III control.
What is the operating weight of this 830E?
Loaded gross vehicle weight is around 385.85 t (850,650 lb), with unladen weight near 162.5 t (358,300 lb) and a nominal payload in the 220-231 t range depending on body and tire configuration.
What replaced this early DC-drive 830E?
Komatsu moved the 830E to an AC-drive Invertex control system as the 830E-1AC, and later revised the line again as the 830E-5 with a Cummins QSK60 engine; both are different engine and drive packages from this original GE DC/Statex III generation.
What AFE32-AA(830E S/N 31807 MT. THORLEY) owners discuss
What engine quirk shows up after routine service on this DC-drive 830E?
This truck carries the original mechanically governed Komatsu SDA16V160 (SSDA16V160) 16-cylinder engine used on early DC-drive 830E units, not the later Cummins QSK60 fitted to AC-drive 830E-1AC and 830E-5 trucks. After a filter and water-separator service, techs commonly report the fuel priming pump runs but no fuel reaches the filters. Pulling a vacuum on the water separator bowl to draw fuel in and bleed air gets it primed. Turbo and injector wear on this engine tracks fuel quality and contamination control more than any inherent design fault.
What is the known weak point in the GE DC wheel motor drivetrain?
The GE wheel motor design has no built-in oil filtration, so ferrous wear contamination collects in the wheel motor and front wheel hub oil between drain intervals. This has been tied to hard-to-predict wheel motor and front spindle bearing failures on this DC-drive generation. Adding magnetic filtration in the wheel motor sumps and hub filler caps, plus trending iron levels through oil sampling, catches bearing wear before it turns into a failure. Wheel motor bearing condition is safety-critical to the driveline. Have your dealer verify bearing condition and insulation resistance before the truck goes back into service.
What undercarriage and suspension wear pattern is typical for a truck this age?
Front strut and rear suspension (dog bone) cylinders are nitrogen-and-oil charged struts. As seals and nitrogen charge age they lose ride height and cushioning, showing up as a harsher ride, uneven strut extension side to side, or a leaking rod seal. Check strut extension and ride height, and confirm nitrogen charge, at every PM interval, and check rear dog bone bushings for play. On a truck built in 1996 this is routine wear, not a defect specific to this unit.
How should the hoist hydraulics behave, and what is a red flag?
The hoist runs off gear pumps feeding multi-stage, dual-acting hoist cylinders with internal cushioning and over-center dampening at the end of stroke. A properly working hoist cushions smoothly into full raise and full lower. A hard clunk or bang at the end of travel is the first sign the cushion valve or cylinder packing needs attention, not the pump.
What electrical and control-system issues come up most in the field?
This truck runs the DC-era GE Statex control system, not the AC-family control system used on later 830E-1AC and 830E-5 trucks. When a fault trips, the system responds with a speed restriction or limp mode rather than a hard shutdown, and faults are pulled with a portable test unit at the control cabinet. Field reports flag the retarder overspeed pickup and dropout calibration drifting over time, and alternator brushes and rectifier panel connections needing periodic cleaning as they age. A retarder fault affects braking capacity on grade. Have your dealer verify retard speed control calibration and rectifier condition rather than clearing the fault and returning the truck to service.
What cooling issue shows up on the dynamic retarding grids?
Dynamic retarding capacity on this truck is rated well above engine power, using extended-range grid retarding cooled by an engine-driven blower that pushes air through the grids and exhausts it out through the wheel motors. The recurring maintenance point is keeping blower intake screens and grid box vents clear. A partially blocked path shows up first as grid overheating or discoloration on long descents, well before the blower itself fails.
What should a buyer check before purchasing a used 830E of this vintage?
Pull the oil sample trend history on the wheel motors and front hubs. Ferrous contamination is the known weak point on this generation. Check suspension cylinder nitrogen charge and ride height on all four corners. Have the frame checked for cracking at load-bearing gussets given the truck's age and hours. Confirm the retarding grids show no burn or overheat discoloration. Check alternator brush and rectifier panel condition. Cold-start the fuel system to rule out priming trouble. This truck was built in 1996, so match the hour-meter history against a documented component change-out record for the wheel motors and alternator. On a DC-drive truck this old, hours alone don't tell the full story.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AFE32-AA(830E S/N 31807 MT. THORLEY) part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.