John Deeredigger, posthole(no series)
John Deere PHD100 - DIGGER, POSTHOLE
Specifications · OEM parts breakdown
Post a parts request and compare supplier quotes.
John Deere PHD100 - DIGGER, POSTHOLE specifications
Engine
| Gearbox HP Rating | 18.6 kW (25 hp) |
| PTO HP Range | 13.4-18.6 kW |
Weights
| Unit Weight | 50.8 kg (112 lb) |
| Shipping Weight (2 per case) | 149.7 kg (330 lb) |
Dimensions
| Boom OD | 7.3 cm (2.875 in) |
| Yoke OD | 6 cm (2.375 in) |
Performance
| RPM | 180 rpm |
| Gear Ratio | 3:1 |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
All PHD100 - DIGGER, POSTHOLE assemblies by section
Every catalogued assembly group for the John Deere PHD100 - DIGGER, POSTHOLE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Decals [B01]
John Deere : Phd100 - Digger, Posthole : Decals [B01]
| 5B***9B | Label; "Danger-Avoid Injury From Power Take-Off", Label; "Danger - Avoid Injury From Power Take-Off", Label; Danger-Avoid Injury From Power Take-Off, Label; Danger, Avoid Injury From Power Take-Off, Label; (A) Decal "Danger-Avoid Injury From Power Take-Off" | 1 |
| 5B***2B | Label; Danger-Rotating Auger,Stay Away, Label; Rotating Auger,Stay Away | 3 |
| 5B***3B | Label; Replace Shields Before Using, Label | 1 |
Down Pressure Kit (Optional) [A19]
John Deere : Phd100 - Digger, Posthole : Down Pressure Kit (Optional) [A19]
| 5B***66 | Pin; Lynch, Pin | 1 |
| 5B***56 | Nut; 1/2", Nut; ½" | 2 |
| 5B***9B | Elec. Connector Term; 1/2"Mp X 3/8"Fp, Elec. Connector Term; ½" Mp X 3/8" Fp, Elec. Connector Term; Connector, Elec. Connector Term | 1 |
Down Pressure Kit(Phd200) [A17]
John Deere : Phd100 - Digger, Posthole : Down Pressure Kit(Phd200) [A17]
| 5B***66 | Pin; Lynch, Pin | 1 |
| 5B***56 | Nut; 1/2", Nut; ½" | 2 |
| 5B***9B | Elec. Connector Term; 1/2"Mp X 3/8"Fp, Elec. Connector Term; ½" Mp X 3/8" Fp, Elec. Connector Term; Connector, Elec. Connector Term | 1 |
Driveline [A15]
John Deere : Phd100 - Digger, Posthole : Driveline [A15]
| 5B***0E | Cross And Bearing As | 2 |
| 5B***1E | Yoke, Yoke; Power Take-Off | 1 |
| 5B***52 | Universal Driveshaft | 1 |
Driveline(Phd100) [A13]
John Deere : Phd100 - Digger, Posthole : Driveline(Phd100) [A13]
| 5B***0E | Cross And Bearing As | 2 |
| 5B***1E | Yoke; Power Take-Off, Yoke; Tractor End | 1 |
| 5B***8B | Set Screw; 1/4" | 1 |
Frame [A07]
John Deere : Phd100 - Digger, Posthole : Frame [A07]
| 5B***77 | Lock Washer; Diameter 12 Z, Lock Washer; D = 12, Lock Washer; Dia 12, Lock Washer; M12, Lock Washer; Dim.12, Lock Washer; Dia=12, Lock Washer; Dia.10 Spring, Lock Washer; Dia.12 Spring | 2 |
| 5B***06 | Cap; M12-1.75 C6 Z Md, Cap; M12, Cap; Hex. M12, Cap; Hh M12-1.75 C6 Z Md, Cap; Breather | 2 |
| 5B***47 | Cap | 3 |
Frame(Phd100) [A05]
John Deere : Phd100 - Digger, Posthole : Frame(Phd100) [A05]
| 5B***77 | Lock Washer; Diameter 12 Z, Lock Washer; D = 12, Lock Washer; Dia 12, Lock Washer; M12, Lock Washer; Dim.12, Lock Washer; Dia=12, Lock Washer; Dia.10 Spring, Lock Washer; Dia.12 Spring | 2 |
| 5B***06 | Cap; M12-1.75 C6 Z Md, Cap; M12, Cap; Hex. M12, Cap; Hh M12-1.75 C6 Z Md, Cap; Breather | 2 |
| 5B***47 | Cap | 3 |
Gearbox [A11]
John Deere : Phd100 - Digger, Posthole : Gearbox [A11]
| 5B***78 | Bolt; Te 10x30 (A), Bolt; M10 X 30, Bolt; M10x30, Bolt; M10-1.50x30 C8.8 Z F, Bolt; Te 10x30, Bolt; Te 10 X 30, Bolt; 10x30, Bolt; 10 X 30 | 8 |
| 5B***80 | Nut, Nut; Dia=10, Nut; Dia. 10, Nut; M10, Nut; Dia 10, Nut; Dia.10 Spring, Nut; Dia.10, Nut; D = 10 | 8 |
| 5B***39 | Bearing; 30210 | 2 |
Gearbox(Phd100) [A09]
John Deere : Phd100 - Digger, Posthole : Gearbox(Phd100) [A09]
| 5B***44 | Lock Washer; M8, Lock Washer; Dia 8, Lock Washer; Dia. 8, Lock Washer; Dia8, Lock Washer; Dia=8, Lock Washer; Dia.8 | 6 |
| 5B***72 | Bearing Race, Bearing Race; 30207 | 2 |
| 5B***29 | Snap Ring; D = 72 Inner, Snap Ring, Snap Ring; Dia 72 | 1 |
Hookup Stand (Optional) [A21]
John Deere : Phd100 - Digger, Posthole : Hookup Stand (Optional) [A21]
| 5B***65 | Washer; Dia 12, Washer; D = 12, Washer; Dia. 12, Washer; Dia 12 W | 4 |
| 5B***00 | Stand | 1 |
| 5B***07 | Tube; Long Bending | 1 |
Positioning Handle (Optional) [A23]
John Deere : Phd100 - Digger, Posthole : Positioning Handle (Optional) [A23]
| 5B***79 | Lock Nut; Hh M10-1.50 C6 Tk Z, Lock Nut; M10-1.50, Lock Nut; M10, Lock Nut | 1 |
| 5B***49 | Bolt; Hh M10-1.50x20 C8.8 Z F, Bolt; M10-1.50x20 C8.8 Z F, Bolt; M10x20, Bolt; 10x20 Te, Bolt; Te 10x20, Bolt; 10x20 | 1 |
| 5B***6B | Handle | 1 |
Need a specific PHD100 - DIGGER, POSTHOLE part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.
Post a parts request and compare supplier quotes.