John Deeregrinder, mixer(no series)
John Deere GX1117 - GRINDER, MIXER
OEM parts breakdown
Post a parts request and compare supplier quotes.
The John Deere Frontier GX1117 Grinder-Mixer has an overall machine height of 10.6 ft.
GX1117 - GRINDER, MIXER common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 5HPLW288 | Filter Head | Scheduled service item | Check fitment → |
| 5HPLW289 | Filter Element | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
All GX1117 - GRINDER, MIXER assemblies by section
Every catalogued assembly group for the John Deere GX1117 - GRINDER, MIXER. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Auger Hydraulic Circuit [B01]
John Deere : Gx1117 - Grinder, Mixer : Auger Hydraulic Circuit [B01]
| 5H***23 | Hose Clamp; 1" | 0 |
| 5H***M1 | Hydraulic Hose; 1/2" X 32" | 0 |
| 5H***10 | Fitting; 3/4", Street Tee | 0 |
Auger Hydraulic Lift Circuit [B04]
John Deere : Gx1117 - Grinder, Mixer : Auger Hydraulic Lift Circuit [B04]
| 5H***1A | Hydraulic Cylinder; Complete, Hydraulic Cylinder; 2-1/2" X 16", Hydraulic Cylinder; 2-1/2" X 16", (64***86) | 0 |
| 5H***34 | Elbow Fitting; 90°, 3/8" Street Elbow, Elbow Fitting; 3/8" | 0 |
| 5H***05 | Coupling; 1/2" Male Coupler, Coupling; Male, Coupling; 1/2" Male | 0 |
Auger Hydraulic Swing Circuit [B03]
John Deere : Gx1117 - Grinder, Mixer : Auger Hydraulic Swing Circuit [B03]
| 5H***51 | Nut; 3/8" Nipple | 0 |
| 5H***65 | Flow Control Hydraulic. Va; Needle (F600s) | 0 |
| 5H***70 | Hose Clamp; 3/8", Complete Hose | 0 |
Concentrate Hopper And Collector [A10]
John Deere : Gx1117 - Grinder, Mixer : Concentrate Hopper And Collector [A10]
| 5H***28 | Spring | 0 |
| 5H***00 | Seal; Blower Pipe | 0 |
| 5H***01 | Seal; Dust Collector | 0 |
Conveyor Drive [A18]
John Deere : Gx1117 - Grinder, Mixer : Conveyor Drive [A18]
| 5H***26 | Bolt; 5/16" X 2" | 0 |
| 5H***66 | Bolt; 5/16' X 3/4" Gr.5 | 0 |
| 5H***57 | Lubrication Fitting; 1/4"Npt X 2 - 5/8" Grease Zerk | 0 |
Drive Line [A12]
John Deere : Gx1117 - Grinder, Mixer : Drive Line [A12]
| 5H***38 | Bolt; 5/8" X 2" Bolt Gr. 5 | 0 |
| 5H***89 | Lubrication Fitting; Grease Zerk, Lubrication Fitting; 1/4”-28 | 0 |
| 5H***02 | Sheave Assembly; 540 Rpm | 0 |
Frame [A06]
John Deere : Gx1117 - Grinder, Mixer : Frame [A06]
| 5H***13 | Pin; Jackpin And Chain, Pin | 0 |
| 5H***4A | Hub; 821, Hub | 0 |
| 5H***5A | Bolt; 5/8" - 18 | 0 |
Gear Box [B05]
John Deere : Gx1117 - Grinder, Mixer : Gear Box [B05]
| 5H***50 | Housing, Housing; Gearbox | 0 |
| 5H***52 | Bevel Gear | 0 |
| 5H***53 | Bearing; (14139a), Bearing; 14137a, Bearing | 0 |
Labels [B19]
John Deere : Gx1117 - Grinder, Mixer : Labels [B19]
| 5H***66 | Label; (B) | 1 |
| 5H***07 | Label; Operating Instructions | 1 |
| 5H***GX | Label; Frontier Model Decal | 2 |
Lights [B17]
John Deere : Gx1117 - Grinder, Mixer : Lights [B17]
| 5H***30 | Bracket; Light Right | 0 |
| 5H***31 | Bracket; Light Left | 0 |
| 5H***02 | Wiring Harness; Light | 0 |
Mill Cylinder [A16]
John Deere : Gx1117 - Grinder, Mixer : Mill Cylinder [A16]
| 5H***68 | Shaft; Mill | 0 |
| 5H***69 | Shaft Key; 3/8" X19-3/8" Cylinder Key | 0 |
| 5H***71 | Plate; Retainer | 0 |
Mill [A14]
John Deere : Gx1117 - Grinder, Mixer : Mill [A14]
| 5H***33 | Panel; Grinder Side | 0 |
| 5H***34 | Bolt; 3/8" X 1-1/2" Gr. 5, Bolt; Mill Bottom | 0 |
| 5H***35 | Bolt; Mill Long 1/2 X 22.500" | 0 |
Oiler [A24]
John Deere : Gx1117 - Grinder, Mixer : Oiler [A24]
| 5H***16 | Tee Fitting; 3/8" Street, Tee Fitting | 0 |
| 5H***10 | Bolt; 1/4" X 1", Bolt; 1/4" X 1" Gr. 5 | 0 |
| 5H***90 | Bracket; Brush Short(Front) | 0 |
Optional 3' And 6' Unloading Auger Extension [B13]
John Deere : Gx1117 - Grinder, Mixer : Optional 3' And 6' Unloading Auger Extension [B13]
| 5H***S7 | Pin; Hair | 0 |
| 5H***80 | Spacer; Pivot, Spacer | 0 |
| 5H***78 | Housing; 6' Extension | 0 |
Optional Fenders [B15]
John Deere : Gx1117 - Grinder, Mixer : Optional Fenders [B15]
| 5H***32 | Support; Fender | 0 |
| 5H***33 | Fender; Fits Either Side | 0 |
Optional Infeed Conveyor Hydraulic Circuit [B12]
John Deere : Gx1117 - Grinder, Mixer : Optional Infeed Conveyor Hydraulic Circuit [B12]
| 5H***17 | Fitting; Adapter (8htx), Fitting; Union (8htx) | 0 |
| 5H***20 | Flow Control Hydraulic. Va | 0 |
| 5H***52 | Hydraulic Hose; 1/2" X 81-1/4" | 0 |
Optional Infeed Conveyor Pivot [B10]
John Deere : Gx1117 - Grinder, Mixer : Optional Infeed Conveyor Pivot [B10]
| 5H***68 | Washer; 3/8", Lock, Washer; 3/8" | 0 |
| 5H***19 | Bolt; 1/2" X 2-1/4" | 0 |
| 5H***81 | Lock Nut; Lock, Lock Nut; 5/16", Lock Nut; 5/16", Lock | 0 |
Optional Infeed Conveyor [B08]
John Deere : Gx1117 - Grinder, Mixer : Optional Infeed Conveyor [B08]
| 5H***28 | Spring | 0 |
| 5H***10 | Shaft Key; 1/4", Shaft Key; 1/4"X1, Shaft Key; 1/4" X 1" Woodruff Key, Shaft Key; 1/4" X 1", Shaft Key; 1/4” X 1” Woodruff, Shaft Key; 1/4" X 1 Woodruff Key, Shaft Key; 3/8" X 1" Woodruff, Shaft Key; 1/4" Woodruff | 0 |
| 5H***68 | Washer; 3/8", Lock, Washer; 3/8" | 0 |
Optional Scale [B16]
John Deere : Gx1117 - Grinder, Mixer : Optional Scale [B16]
| 5H***69 | Power Cord; Tractor Power Supply Cord, Power Cord; Tractor | 0 |
| 5H***19 | U-Bolt; 5/16" X 2" | 0 |
| 5H***00 | Arm; Control Box | 0 |
Pto [B07]
John Deere : Gx1117 - Grinder, Mixer : Pto [B07]
| 5H***74 | Repair Kit; Safety Slide Lock | 0 |
| 5H***83 | Label; Danger - Rotating Driveline, Label, Label; Safety Sign | 0 |
| 5H***86 | Safety Sign | 0 |
Shields [A23]
John Deere : Gx1117 - Grinder, Mixer : Shields [A23]
| 5H***10 | Bolt; 1/4" X 1", Bolt; 1/4" X 1" Gr. 5 | 0 |
| 5H***21 | Shield; Front | 0 |
| 5H***22 | Shield; Hinge | 0 |
Tank [A08]
John Deere : Gx1117 - Grinder, Mixer : Tank [A08]
| 5H***25 | Spring; Latch | 0 |
| 5H***34 | Rivet; 3/16" X .700", Rivet; 3/16" | 0 |
| 5H***01 | Tank | 0 |
Unloading Auger [A20]
John Deere : Gx1117 - Grinder, Mixer : Unloading Auger [A20]
| 5H***87 | Spring | 0 |
| 5H***23 | Bolt; 1/4" X 1-1/4" | 0 |
| 5H***57 | Bolt; 3/8" X 3/4" Gr. 5, Bolt; 3/8" X 3/4" | 0 |
Unloading Auger [A22]
John Deere : Gx1117 - Grinder, Mixer : Unloading Auger [A22]
| 5H***16 | Bolt; 5/16" X 3/4" Carriage | 0 |
| 5H***10 | Shaft Key; 1/4", Shaft Key; 1/4"X1, Shaft Key; 1/4" X 1" Woodruff Key, Shaft Key; 1/4" X 1", Shaft Key; 1/4” X 1” Woodruff, Shaft Key; 1/4" X 1 Woodruff Key, Shaft Key; 3/8" X 1" Woodruff, Shaft Key; 1/4" Woodruff | 0 |
| 5H***68 | Washer; 3/8", Lock, Washer; 3/8" | 0 |
Need a specific GX1117 - GRINDER, MIXER part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.
Post a parts request and compare supplier quotes.