John Deereplow, moldboard (integral)(no series)

John Deere F325 - PLOW, MOLDBOARD (INTEGRAL)

OEM parts breakdown

Search live F325 - PLOW, MOLDBOARD (INTEGRAL) parts Source or supply its parts

Post a parts request and compare supplier quotes.

The John Deere F325 is a power-reset integral moldboard plow designed for agricultural use.

F325 - PLOW, MOLDBOARD (INTEGRAL) common service parts

Part number	Part	Notes
U12547	O-Ring	Scheduled service item	Check fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

All F325 - PLOW, MOLDBOARD (INTEGRAL) assemblies by section

Every catalogued assembly group for the John Deere F325 - PLOW, MOLDBOARD (INTEGRAL). Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Adjustable Pressure Control Valve [A17]

John Deere : F325 - Plow, Moldboard (Integral) : Adjustable Pressure Control Valve [A17]

22***09	Set Screw; 1/4" X 5/16", (Sub For Ty4176), Set Screw; 1/4" X 5/16", Set Screw; 1/4" X 5/16" (Use With Re292591), Set Screw	1
34***82	Spring Pin; 3/16"X3/4", Spring Pin; 3/16" X 1", Spring Pin; 3/16" X 1", (12, 15 And 18 Ft. With Conditioner), Spring Pin, Spring Pin; 3/16"X1", Spring Pin; 3/16" X 1", (Use With Al61479), Spring Pin; (A) 3/16" X 1", Spring Pin; 3/16" X 5/8" X 1/16", Spring Pin; 3/16"X1/2", Spring Pin; 3/16" X 1", (Use With Ar32154 Or Ar32155), Spring Pin; 3/16" X 1", (Sub For M78732), Spring Pin; 3/16" X 1" (Sub For 34h394), Spring Pin; (B) 3/16" X 1", Spring Pin; 3/16" X 1", (11/32"), Spring Pin; 3/16" X 1", Spring Pin; 3/16" X 1", Gear Shift Fork, (Sub For Et10548), Spring Pin; 3/16" X 1", In-Line Units	1
A2***57	Back-Up Ring	1
A2***58	O-Ring	2

See all parts with full part numbers in Heavy Parts AI →

Cushion Disk Coulters ( -1976) [B08]

John Deere : F325 - Plow, Moldboard (Integral) : Cushion Disk Coulters ( -1976) [B08]

11***16	Cotter Pin; 3/16" X 1", For 6-Row, Cotter Pin; 3/16" X 1", Cotter Pin; 3/16" X 1" 3/16" X 1", Cotter Pin, Cotter Pin; 3/16" X 1", (Sub R32507), Cotter Pin; 3/16" X 1", For 40-Tooth Section, Cotter Pin; 3/16" X 1", (Sub For A18135) For 4 Section, Cotter Pin; 3/16 X 1", Cotter Pin; (A) 3/16" X 1", Cotter Pin; (D) 3/16" X 1", Cotter Pin; 3/16" X 1", For Heavy Duty Scrapers, Cotter Pin; 3/16" X 1", (Sub For A18135) For 5 Section, Cotter Pin; 3/16" X 1", (Sub For Mg87397), Cotter Pin; (B) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Sections, Cotter Pin; 3/16" X 1", For 40-Tooth Sections, Cotter Pin; (B) (C) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Section, Cotter Pin; 3/16" X 1", Extension Only, Cotter Pin; 3/16" X 1-1/2" (Sub For 11h218), Cotter Pin; 3/16" X 1", For 4w, 6n, 6w, Cotter Pin; 3/16"X1", Cotter Pin; 3/16"X3/4", Cotter Pin; 3/16"X3/8", Cotter Pin; 3/16" X 1", (4884, 4684, 5184, 5186)	2
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
11***22	Cotter Pin, Cotter Pin; 3400, 3/16" X 2", Cotter Pin; 3/16" X 1-3/4", Cotter Pin; 9/16"X2" (Sub For 11h88), Cotter Pin; 3/16" X 2", (Ru), Cotter Pin; 4.775 X 50.800 mm, Cotter Pin; 3/16" X 2", (Sub 11m7032), Cotter Pin; 3/16" X 2", (614), Cotter Pin; (A) 3/16" X 2", Outer, Cotter Pin; 4.775 X 50.800 mm, Cotter Pin; 3/16"X1-3/4", Cotter Pin; 3/16" X 2", Cotter Pin; (A) 3/16" X 2", Cotter Pin; 3/16"X2", Cotter Pin; (B) 3/16" X 2", Cotter Pin; 3/16" X 2", (814), Cotter Pin; 3/16" X 2", (Rc And St)	2
11***55	Cotter Pin; 5/16" X 2", Use A3581r Or 11h255 (Sub 11m7056), Cotter Pin; (A: For 4 And 5 Bottoms Plow) 5/16" X 2", Cotter Pin, Cotter Pin; 5/16" X 2", (Included With Cylinder), Cotter Pin; 5/16" X 2", Cotter Pin; (B) 5/16" X 2", Cotter Pin; 5/16" X 2", (Sub For 11m7056), Cotter Pin; 5/16" X 2" (Included With Cylinder), Cotter Pin; 7.925 X 50.800 mm (5/16" X 2")	2

See all parts with full part numbers in Heavy Parts AI →

Decals [B10]

John Deere : F325 - Plow, Moldboard (Integral) : Decals [B10]

A2***29	Label; (Sub Aa32090) "Model Designation" Right And Left Rear Side Of Main Frame, Label; (Sub Aa32090) "Designation Model Kit" 50 mm (2") - Located On Outside Of Long Frame Tube And One On Outside Of Short Frame Tube, Label; (Sub Aa32090) "Designation Model Kit" 50 mm (2") Located On Outside Of Long Frame Tube And On Outside Of Short Frame Tube, Label; (Sub Aa32090) "Model Designation" - Located On Rear Cross Tube, Label; (Sub Aa32090) "Designation Model Kit" - Located On Outside Of Each Wing (This Application Only), Label; Model Designation Kit, Label; (Sub Aa32090) Kit, Model Designation, 51 mm (2") - Centered On Right Side Of Truss Tube Over Front Bottom, Label; (Sub Aa32090) Kit, Model Designation, Outside And Front Of Truss Tube, Label; (Sub Aa32090) "Model Designation" 51 mm (2"), Label; (Sub Aa32090) "Model Designation" 50 mm (2") Centered On Right Side Of Truss Tube Between Front Two Bottoms, Label; (Sub Aa32090) Kit, Model Designation, Left And Right Sides Of Main Frame, 50 mm (2"), Label; (Sub Aa32090) "Model Designation" - Located On R.H. End And Rear Of Tube, Label; (Sub Aa32090) "Designation Model Kit" - Located On Outside Of Each Side Tube And On Front Of Upper Cross Link, Label; (Sub Aa32090) "Model Designation" - Located On Rear Of Main Frame And Outside Of Each Narrow Wing; On Outside Of Each Wide Wing, Label; "Model Designation Kit" - Located On Each Side Pf Main Frame 65 mm (2.5"), Label; (Sub Aa32090) Model Designation, Label; (Sub Aa32090) Kit, Model Designation, 150 mm (6") Located On Right Side And Rear Of Truss Tube	1
AA***06	Decals; Kit, Accumulator, Bilingual - French (Includes One Each A36270 Accumulator Instructions Label,A36271 Accumulator Warning Label And A37229 Instruction Label), Decals; Kit, Accumulator Decals, Bilingual - French (Includes (1) One Each, A36270 Accumulator Instruction Label, A36271 Accumulator Warning Label And A37229 Instruction Sheet)	1
AA***90	Sign; "Model Designation" Located On Rear Cross Tube., Sign; "Model Designation Kit" 75mm, Sign; "Model Designation" Located On Right Side Of Hitch Tube, Sign; "Model Designation" 50 mm, Sign; "Model Designation" Centered On Right Side Of Truss Between Front Two Bottoms, Sign; "Designation Model Kit" Located On Outside Of Long Frame Tube And On Outside Of Short Frame Tube, Sign; "Model Designation" - Located On R.H. End And Rear Of Tube, Sign; "Model Designation" On Outside Of Long Frame., Sign, Sign; "Model Designation Kit" - Located On Each Side Of Main Frame, Sign; "Model Designation" Located On Right And Left Side Of Main Frame., Sign; "Model Designation Kit" - Located On Outside Of Each Wing, Sign; "Model Designation" - Located On Rear Of Main Frame And Outside Of Each Narrow Wing; On Outside Of Each Wide Wing, Sign; "910" - Located On R.H. Mast Plate, Sign; "Model Designation" Right And Left Rear Side Of Main Frame., Sign; "Model Designation" Kit, Outside And Front Of Truss Tube, Sign; Kit, Model Designation, Located On Right Side And Rear Of Truss Tube.	1
JD***14	Label; "Leaping Deer" 100 mm (4") Located On Right Side And Rear Of Truss Tube, Label; (B) "Leaping Deer" Left Rear Center Of Main Frame 115 mm (4-1/2"), Label; "Leaping Deer" 115 mm (4-1/2") Located On L.H. Rear Center Of Main Frame. For 4 775 mm (15'8") Size., Label; "Leaping Deer" 100 mm (4"), Label; "Leaping Deer" 100 mm (4") - Located On Outside Of L.H. Mast Plate, Label; 100 mm (4") Leaping Deer On Mast, Label; "Leaping Deer" - Located On L.H. Center Of Main Frame, 100 mm (4"), Label; Leaping Deer (21,28 And 30-Foot), Label; "Leaping Deer" - Located On Outside Of L.H. Mast, Label; "Leaping Deer", 125 mm (5") - Located On 77 Hitch	1

See all parts with full part numbers in Heavy Parts AI →

External Valve Accumulator (Accumulator Hydraulic System) [A25]

John Deere : F325 - Plow, Moldboard (Integral) : External Valve Accumulator (Accumulator Hydraulic System) [A25]

A1***17	Adapter	1
A1***18	Spider, Spider; (No Longer Available)	1
A1***19	Spring; (No Longer Available), Spring	1
A1***20	Washer; (No Longer Available), Washer	1

See all parts with full part numbers in Heavy Parts AI →

Frame (3-Bottom Plow) [A05]

John Deere : F325 - Plow, Moldboard (Integral) : Frame (3-Bottom Plow) [A05]

08***73	Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C)	5
08***22	Cap Screw; (B) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (Sub For Mg281036), Cap Screw; 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (12'-2" Through 15'-0") (10,000 Lb Chain), Cap Screw; 3/4"X7-1/2", Cap Screw; 3/4" X 7-1/2", (12'2" Through 15'0") (For 10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (For 12-Row), Cap Screw; 3/4" X 7-1/2", 5 X 7 Frame, Cap Screw; 3/4" X 7-1/2", (For 12 Row), Cap Screw; (C) 3/4" X 7-1/2", (Long Tongue), Cap Screw; (A) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (13'-10" Through 19'-10") (10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (Long Tongue), Cap Screw; 3/4" X 7-1/2" (Use On Tapered Spring), Cap Screw; 3/4" X 7-1/2" (5 X 7 Frame), Cap Screw; (C) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (For 5 X 7 Frame), Cap Screw; (D: For 5 X 7 Frame) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" R.H., Cap Screw; 3/4" X 7-1/2" (Long Tongue) (C)	1
12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	13
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	8

See all parts with full part numbers in Heavy Parts AI →

Frame (4-Bottom Plow) [A06]

John Deere : F325 - Plow, Moldboard (Integral) : Frame (4-Bottom Plow) [A06]

08***73	Cap Screw; 5/8" X 6-1/2", 2 Used On N135553 With N135562 Frame 2 Used On N135552 With N135562 Frame, Cap Screw; 5/8" X 6-1/2", 10 Weights, Region I, Cap Screw; 5/8" X 6-1/2", Cap Screw; (C)	7
08***22	Cap Screw; (B) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (Sub For Mg281036), Cap Screw; 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (12'-2" Through 15'-0") (10,000 Lb Chain), Cap Screw; 3/4"X7-1/2", Cap Screw; 3/4" X 7-1/2", (12'2" Through 15'0") (For 10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (For 12-Row), Cap Screw; 3/4" X 7-1/2", 5 X 7 Frame, Cap Screw; 3/4" X 7-1/2", (For 12 Row), Cap Screw; (C) 3/4" X 7-1/2", (Long Tongue), Cap Screw; (A) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (13'-10" Through 19'-10") (10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (Long Tongue), Cap Screw; 3/4" X 7-1/2" (Use On Tapered Spring), Cap Screw; 3/4" X 7-1/2" (5 X 7 Frame), Cap Screw; (C) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (For 5 X 7 Frame), Cap Screw; (D: For 5 X 7 Frame) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" R.H., Cap Screw; 3/4" X 7-1/2" (Long Tongue) (C)	1
12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	15
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	11

See all parts with full part numbers in Heavy Parts AI →

Gauge Wheel And Axle [B07]

John Deere : F325 - Plow, Moldboard (Integral) : Gauge Wheel And Axle [B07]

11***35	Cotter Pin; 1/8" X 1/2", Cotter Pin; 1/8" X 1/2", (Sub 11m7012)	1
11***12	Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	2
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	4

See all parts with full part numbers in Heavy Parts AI →

Hitch Crossbar, Landing Screw, And Mast Plates [A07]

John Deere : F325 - Plow, Moldboard (Integral) : Hitch Crossbar, Landing Screw, And Mast Plates [A07]

11***11	Cotter Pin; 1/8" X 1" (Sub For 11h236), Cotter Pin; (A), Cotter Pin; 1/8" X 3/4", 2510, 3010, 3020, 4010, Or 4020 Tractors, Cotter Pin; 1/8"X3/4", Cotter Pin; 1/8" X 3/4", Heavy-Duty Scraper Attachments, Cotter Pin; 1/8" X 3/4", 4020 Or 4010 Tractor, Cotter Pin; 1/8"X5/8" (Sub For 11h38), Cotter Pin; 1/8"X1/4", Cotter Pin; (C) 1/8"X3/4", Cotter Pin; 1/8"X5/8", Cotter Pin; 1/8" X 3/4", (Stainless Steel), Cotter Pin; (C) 1/8" X 3/4", Cotter Pin; 1/8"X 3/4", Cotter Pin; 1/8" X 3/4", Heavy-Duty Scraper Attachment, Cotter Pin; 1/8" X 3/4", (Optional), Cotter Pin; 1/8" X 3/4", 4010 Or 4020 Tractor, Cotter Pin; 1/8" X 3/4", For Heavy-Duty Scraper Attachments, Cotter Pin; (B) 1/8" X 3/4", Cotter Pin; (A) (D) 1/8" X 3/4", Cotter Pin; (D) 1/8" X 3/4", Cotter Pin; (A) 1/8" X 3/4", Cotter Pin; 1/8" X 3/4", (Sub 11m1383), Cotter Pin; 1/8" X 3/4" (Stainless Steel), Cotter Pin, Cotter Pin; 1/8" X 3/4", Cotter Pin; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 1/8" X 3/4", Cotter Pin; 1/8" X 3/4" (Sub 11m1383), Cotter Pin; 1/8" X 3/4" (Sub 11m1383) (Stainless Steel), Cotter Pin; (Sub 11m1383), Cotter Pin; 1/8" X 3/4", Tire Skip Spacing	1
11***14	Cotter Pin; 5/16" X 1-1/2", Cotter Pin; 5/16" X 1-1/2", (Sub For 11h215)	2
11***49	Cotter Pin; 1/4" X 2", Use With Category 2 Without Quik-Coupler, Cotter Pin; (B), Cotter Pin; 1/4" X 2", Cotter Pin; (B) (C) (D) 1/4" X 2", Cotter Pin; 1/4" X 2", (For Universal Three-Point Hitch), Cotter Pin; (A) 1/4" X 2", Cotter Pin, Cotter Pin; 1/4"X2", Cotter Pin; 6.350 X 50.800 mm, Cotter Pin; 1/4" X 2", Category 2, Cotter Pin; 1/4" X 2" (Sub For A3581r), Cotter Pin; 1/4" X 2", (Sub 11m7040), Cotter Pin; 1/4" X 2", For 610, Cotter Pin; 1/4" X 2", For 810, Cotter Pin; 1/4" X 2", Use With Category Ii, 3-Point Hitch, Cotter Pin; (C) 1/4" X 2", Cotter Pin; (B) (C) 1/4" X 2", Cotter Pin; 1/4" X 2", (Sub 16h761, This Application Only), Cotter Pin; (B) 1/4"X2", Cotter Pin; 1/4" X 2", Center Link, Cotter Pin; 1/4" X 2", Category Ii, Cotter Pin; 1/4" X 2" Iso (Sub For A3581r), Cotter Pin; (B) 1/4" X 2"	1
12***45	Lock Washer, Lock Washer; 7/8", Use With An210648, Lock Washer; 7/8", (Use With An210648), Lock Washer; 7/8", Lock Washer; 7/8", Used With Old Frog, Lock Washer; 7/8", (Sub For Ch11480), Lock Washer; 7/8", Lock Washer; (Sub For A590922), Lock Washer; 7/8", (Ru, Rs, Rus, Ut, Or), Lock Washer; (B: Use With Ar89139, Ar89140, Ar89141 Or Re50911 (10-Bolt Hub)) 7/8", Lock Washer; (A) 7/8", Lock Washer; (B) 7/8", Lock Washer; (A: Less Rockshaft) 7/8", Lock Washer; 22.225 mm (7/8"), Lock Washer; 7/8" (Sub For Re31951 And Re20294)	2

See all parts with full part numbers in Heavy Parts AI →

Hitch Support Bar And Mast Braces (3-Bottom Plow) [A08]

John Deere : F325 - Plow, Moldboard (Integral) : Hitch Support Bar And Mast Braces (3-Bottom Plow) [A08]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	3
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	3
19***07	Cap Screw; (A: Extension Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (With Drawbar Offset Down), Cap Screw; (A: Clutch Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; (C) 3/4" X 2-3/4", Cap Screw; Ar 3/4"X2-3/4", Cap Screw; (A) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Code 1403), Cap Screw; (B: 100 mm Axle) (C: 92 mm Axle With R54160) 3/4" X 2-3/4", Cap Screw; 3/4"X3", Cap Screw; 3/4" X 2-3/4", (Center), Cap Screw; (B) (C) 3/4" X 2-3/4", Cap Screw; (A) (B) 3/4" X 2-3/4", Rear Top, Cap Screw; (B) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Or), Cap Screw; 3/4" X 2-3/4", Cap Screw; 3/8"X2-3/4", Cap Screw; Ar, 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4" Rear Top, (17'-11" Through 26'-5"), Cap Screw; 3/4" X 2-3/4", (Rc, St And Ru), Cap Screw; (B: Torque Divider To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: Clutch Housing To Cylinder Block) 3/4" X 2-3/4", Cap Screw; (D) (E) 3/4" X 2-3/4", Cap Screw; 3/4"X2-3/4", Cap Screw; Ar,3/4"X2-3/4", Cap Screw; (A: Extension Housing To Torque Divider) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", Rear Top, Cap Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: 20.8-38 Tire 8 Pr Not Used In U.S. And Canada) 3/4" X 2-3/4" (24.5-32 Or 23.1-34) Tire, Cap Screw; 3/4" X 2-3/4", (Row-Crop And Standard), Cap Screw; 3/4" X 2-3/4", For 850, Cap Screw; (A: 10, 000 Lb.) 3/4" X 2-3/4" Rigid Hitch, Cap Screw; (C) (D) (E) 3/4" X 2-3/4"	2
19***00	Cap Screw; 3/4" X 5", Bottom Outer Holes, Without Axle Extensions, Cap Screw; 3/4" X 5" (Sub For N130494), Cap Screw; Ar,3/4"X5", Cap Screw; 3/4" X 5", (1 Used On L.H. Side For Power Door), Cap Screw; 3/4" X 5", (Lower), Cap Screw; 3/4" X 5" (24" And 28" Rear Tire), Cap Screw; Ar 3/4"X5", Cap Screw; 3/4" X 5" Lh, Cap Screw; 3/4" X 5" (L.H.), Cap Screw; (A: For Prodrive) 3/4" X 5", Cap Screw; 3/4" X 5", Cap Screw; 3/4" X 5" L.H., Cap Screw; Ar, 3/4" X 5", Cap Screw; (A) 3/4" X 5", Cap Screw; Ar 3/4"X5" Low, Cap Screw; 3/4" X 5", (1 Used On L.H. Side Of Power Door), Cap Screw; (B) 3/4" X 5", Cap Screw; (F) 3/4" X 5", Cap Screw; (D) 3/4" X 5", Cap Screw; 3/4" X 5" (Lh), Cap Screw; 3/4" X 5", (Upper), Cap Screw; (E) 3/4" X 5"	1

See all parts with full part numbers in Heavy Parts AI →

Hitch Support Bar And Mast Braces (4-Bottom Plow) [A09]

John Deere : F325 - Plow, Moldboard (Integral) : Hitch Support Bar And Mast Braces (4-Bottom Plow) [A09]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	5
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	5
19***07	Cap Screw; (A: Extension Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (With Drawbar Offset Down), Cap Screw; (A: Clutch Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; (C) 3/4" X 2-3/4", Cap Screw; Ar 3/4"X2-3/4", Cap Screw; (A) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Code 1403), Cap Screw; (B: 100 mm Axle) (C: 92 mm Axle With R54160) 3/4" X 2-3/4", Cap Screw; 3/4"X3", Cap Screw; 3/4" X 2-3/4", (Center), Cap Screw; (B) (C) 3/4" X 2-3/4", Cap Screw; (A) (B) 3/4" X 2-3/4", Rear Top, Cap Screw; (B) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Or), Cap Screw; 3/4" X 2-3/4", Cap Screw; 3/8"X2-3/4", Cap Screw; Ar, 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4" Rear Top, (17'-11" Through 26'-5"), Cap Screw; 3/4" X 2-3/4", (Rc, St And Ru), Cap Screw; (B: Torque Divider To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: Clutch Housing To Cylinder Block) 3/4" X 2-3/4", Cap Screw; (D) (E) 3/4" X 2-3/4", Cap Screw; 3/4"X2-3/4", Cap Screw; Ar,3/4"X2-3/4", Cap Screw; (A: Extension Housing To Torque Divider) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", Rear Top, Cap Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: 20.8-38 Tire 8 Pr Not Used In U.S. And Canada) 3/4" X 2-3/4" (24.5-32 Or 23.1-34) Tire, Cap Screw; 3/4" X 2-3/4", (Row-Crop And Standard), Cap Screw; 3/4" X 2-3/4", For 850, Cap Screw; (A: 10, 000 Lb.) 3/4" X 2-3/4" Rigid Hitch, Cap Screw; (C) (D) (E) 3/4" X 2-3/4"	2
19***82	Cap Screw; (A: For Prodrive) 3/4" X 2-1/4", Cap Screw; 3/4" X 2-1/4", (First Outside Weights For Use With Inside Weight), Cap Screw; 3/4"X2-1/4", Cap Screw; Ar,3/4"X2-1/4", Cap Screw; 3/4" X 2-1/4", (Includes R27084, R27085, R34958 And 24h1283), Cap Screw; 3/4" X 2-1/4", For 4-Row, Cap Screw; 3/4" X 2-1/4", For 870, Cap Screw; 3/4" X 2-1/4", (For Front Holes), Cap Screw; 3/4" X 2-1/4", Rh, Cap Screw; 3/4" X 2-1/4", (2 Used On Standard Door) (1 Used On R.H. Side For Power Door), Cap Screw; 19.050 X 57.150 mm (3/4" X 2-1/4"), Cap Screw; 3/4" X 2-1/4", (First Outside Weight For Use With Inside Weight), Cap Screw; 3/4" X 2-1/4", (Code 1403), Cap Screw; 3/4" X 2-1/4", (For Rollomatic Adapter Spacer), Cap Screw; 3/4" X 2-1/4" (First Outside Weight For Use With Inside Weight), Cap Screw; (B) 3/4" X 2-1/4", Cap Screw; (A: Clutch Housing To Transmission Case) 3/4" X 2-1/4", Cap Screw; 19.050 X 57.150 mm, Cap Screw; 3/4" X 2-1/4", (For Spacer Rollomatic Adapter), Cap Screw; 3/4" X 2-1/4" (Support To Cylinder Block), Cap Screw; Ar 3/4"X2-1/4" Up, Cap Screw; (A) 3/4" X 2-1/4", Cap Screw; (A: With Wheel W16x34) 3/4" X 2-1/4", Cap Screw; 3/4" X 2-1/4", (Front Holes), Cap Screw; 3/4" X 2-1/4", 4- And 5- Bottom 356 mm (14") And 406 mm (16") Plows, Cap Screw; 3/4" X 2-1/4" 18.4-34 R4 Pc Aero, Cap Screw; 3/4" X 2-1/4", (Not Included), Cap Screw; 3/4" X 2-1/4", (Upper), Cap Screw; 3/4" X 2-1/4", Cap Screw; Ar, 3/4" X 2-1/4", Cap Screw; 3/4" X 2-1/4", Lh, Cap Screw; 3/4" X 2-1/4", (2 Used On Standard Door) (1 Used On R.H. Side Of Power Door), Cap Screw; 3/4" X 2-1/4", First Outside Weight For Use With Inside Weight, Cap Screw; (C) 3/4" X 2-1/4"	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder - 8-Inch (205 Mm) Stroke (1969- ) (Standards) (Marked I.D.I) [A13]

John Deere : F325 - Plow, Moldboard (Integral) : Hydraulic Cylinder - 8-Inch (205 Mm) Stroke (1969- ) (Standards) (Marked I.D.I) [A13]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
A1***61	Pin; 3/4 X 2.375 Button Head, Pin	2
A1***01	Washer; (Sub Ah78775)	1
A1***99	Retainer, Retainer; (No Longer Available)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder - 8-Inch (205 Mm) Stroke (Standards) (Marked Cessna) [A12]

John Deere : F325 - Plow, Moldboard (Integral) : Hydraulic Cylinder - 8-Inch (205 Mm) Stroke (Standards) (Marked Cessna) [A12]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
A1***61	Pin; 3/4 X 2.375 Button Head, Pin	2
A1***01	Washer; (Sub Ah78775)	1
A1***29	Ring; (Sub Ah78775)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Hoses And Fittings ( -1972) (John Deere Hydraulic System) [A18]

John Deere : F325 - Plow, Moldboard (Integral) : Hydraulic Hoses And Fittings ( -1972) (John Deere Hydraulic System) [A18]

A1***99	Plug; (A), Plug; Dust, Cover; - Air Cleaner, Plug, Plug; (Sub Aw17006), Plug; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors)	1
AA***43	Hydraulic.Quick Coupler S	1
AA***92	Hydraulic Hose; 13 mm X 1 220 mm (1/2" X 48")	1
AR***10	Hydraulic.Quick Coupler P, Hydraulic.Quick Coupler P; (Pressure) (Sub Ar93819), Hydraulic.Quick Coupler P; Assembly,Incl Keys 9-14 (Ord Al27019), Hydraulic.Quick Coupler P; (Sub Ar93819) (Pressure), Hydraulic.Quick Coupler P; (Sub Ar93819), Hydraulic.Quick Coupler P; Pressure (Sub Ar93819), Hydraulic.Quick Coupler P; Pressure, (Sub Ar93819), Hydraulic.Quick Coupler P; (A) (Sub Ar93819), Hydraulic.Quick Coupler P; (Pressure), Hydraulic.Quick Coupler P; Incl Keys 14-18, Hydraulic.Quick Coupler P; Complete (Pressure), Hydraulic.Quick Coupler P; High Pressure, (Sub Ar93819)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Hoses And Fittings (1972- ) [A19]

John Deere : F325 - Plow, Moldboard (Integral) : Hydraulic Hoses And Fittings (1972- ) [A19]

AA***69	Hydraulic Hose; 10 mm X 2 440 mm (3/8" X 96"), Hydraulic Hose; 9.53 X 2438 mm (3/8 X 96"), Hydraulic Hose	2
AA***70	Hose; 19 mm X 2 438 mm (3/4" X 96"), Hose; 13 mm X 2 440 mm (1/2" X 96")	1
AA***88	Hydraulic. Quick-Connect C	1
AA***89	Plug	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Hoses And Fittings (Accumulator Hydraulic System) [B02]

John Deere : F325 - Plow, Moldboard (Integral) : Hydraulic Hoses And Fittings (Accumulator Hydraulic System) [B02]

12***04	Part Missing In Wise; 3/8", Outer, Part Missing In Wise; (A: Not Required) 3/8", Part Missing In Wise; (E) 3/8", Part Missing In Wise; 3/8" (B) (C), Part Missing In Wise; 3/8" (Not Longer Required), Part Missing In Wise; (C: (-Xxxxxx) 4050-00*92; 4250-0153; 4450-0281) 3/8" (Sub For R53668), Part Missing In Wise; 3/8", (Use With 19h3219) (Not Required With E55662), Part Missing In Wise; 3/8" (4050), Part Missing In Wise; 3/8", (Sub For Mg80679), Part Missing In Wise; 3/8", (Code 3904), Part Missing In Wise; 3/8" (B), Part Missing In Wise; (A: 5103e/5104/5204/5038d(0001-), 5103/5103s(0091-), 5203(0082-).) 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With H108673), Part Missing In Wise; 3/8" (Saran Cd), Part Missing In Wise; 3/8", (Rs, Ut, Or), Part Missing In Wise; (B) (C) 3/8", Part Missing In Wise; 3/8", (Delco Remy), Part Missing In Wise; (B: Hi-Crop) 3/8", Part Missing In Wise; 3/8", (Not Used With E55662), Part Missing In Wise; (B: W/O Sound-Gard Body) 3/8", Part Missing In Wise; 3/8" (Use With R59409), Part Missing In Wise; 3/8", (Code 1601 And 1610), Part Missing In Wise; 3/8" (Pulley To Fan Spacer) Code 2314 (Af Only), Part Missing In Wise; (A) Roosa Master Dp,3/8", Part Missing In Wise; 3/8" (Sub For Ar52325), Part Missing In Wise; (A: From Sr.No.5103e/5103/5103s/5203-1272, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; (C: Not Required) 3/8", Part Missing In Wise; 3/8" (913, 915, 918 And 924), Part Missing In Wise; 3/8", (Ru And Or), Part Missing In Wise; 3/8", (Rs), Part Missing In Wise; (B: (Xxxxxx-) 4555-0100; 4755-0101; 4955-0149) 3/8", Part Missing In Wise; 3/8" (Radiator Brace Strut), Part Missing In Wise; X X (A) 3/8", Lock Washer; 3/8", Part Missing In Wise; (A) 3/8", (Use With R59409), Part Missing In Wise; 3/8", (Code 3102) (Not Req. W/E55662), Part Missing In Wise; 3/8", (Sub For Mg80680 And Mg80702), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8", (No Longer Required With 19h1936), Part Missing In Wise; 3/8", (Not Required With E55661), Part Missing In Wise; 3/8" (Without Dial-A-Matic), Part Missing In Wise; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Part Missing In Wise; 3/8", (Ru), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0018; 8650-0097) 3/8", Part Missing In Wise; 3/8" Rh, Part Missing In Wise; 3/8" (Use With R53382), Part Missing In Wise; 9.525 mm (3/8") (854a, -6150; 1253a, -6100), Part Missing In Wise; 3/8", (Not Req. W/E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With 14h812), Part Missing In Wise; 3/8", (Not Required W/E55662), Part Missing In Wise; (B: (Xxxxxx-) Serial No. 8450-0019; 8650-0098) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) 3004 And 3005, Part Missing In Wise; 3/8", (Code 4102), Part Missing In Wise; 3/8" (Use With 19h3267), Part Missing In Wise; 3/8", 6216, Part Missing In Wise; 3/8", (Not Required W/ E55662), Part Missing In Wise; (A: (-Xxxxxx) 4250-0071; 4450-0105) 3/8", Part Missing In Wise; (No Longer Required With R41041), Part Missing In Wise; 3/8", (Standard Models), Lock Washer; 3/8", (Use With 19h2284) (Use With 19h2284), Part Missing In Wise; 3/8" Hi-Crop, Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0048; 8650-0090) 3/8", Part Missing In Wise; 3/8" W/Rg, Part Missing In Wise; 3/8" (Sub For Mg80680), Part Missing In Wise; (B: (-Xxxxxx) 4650-0055; 4850-0027) 3/8", Part Missing In Wise; 3/8", 730 Tractor, Part Missing In Wise; 3/8", For 12' Harrow, Part Missing In Wise; 3/8" (Less Power Take-Off), Part Missing In Wise; 3/8", (Use With R191204), Part Missing In Wise; 3/8" 3/8" X 3/4", Part Missing In Wise; (A) 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Nlr For E55662), Part Missing In Wise; 3/8", (Not Used On 570), Part Missing In Wise; 3/8", (22 Used, Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", For 3179dl016, Part Missing In Wise; 3/4", Part Missing In Wise; (Use With 14h1076), Part Missing In Wise; 3/8", (Diesel), Part Missing In Wise; 3/8", (No Longer Required With 19h3483), Part Missing In Wise; 3/8", Roll Top, Part Missing In Wise; (B: 2 Used Dual, 3 Used Triple) 3/8", Part Missing In Wise; 3/8", (Use With Ar87023 Or Ar87024), Part Missing In Wise; 3/8", Code 2311 (Af, Af001) (Pulley To Fan Spacer), Part Missing In Wise; (A: Less Rockshaft) 3/8", Part Missing In Wise; (C: (-Xxxxxx) 4050-0092; 4250-0153; 4450-0281) 3/8", Part Missing In Wise; 3/8", (Manual), Part Missing In Wise; 3/8" 3/8" Ar, Part Missing In Wise; 3/8", (Orchard Fenders), Part Missing In Wise; (A: Less Power Take-Off) 3/8", Part Missing In Wise; 3/8", Use With Furrower, Part Missing In Wise; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8", Part Missing In Wise; (A) (B) (C) 3/8", Part Missing In Wise; 3/8", Code 2311(Tf), Part Missing In Wise; (A) (C) (E) 3/8", Part Missing In Wise; (C: Use With Ar55639, Ar62267, Ar77254, Re13722, Re41875, Ty6701, Ty6710 And Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", (Use With R90994), Part Missing In Wise; 3/8", (Sub For T11088), Part Missing In Wise; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", (Not Req. W/ E55662), Part Missing In Wise; 3/8" (Use With R55396), Part Missing In Wise; 3/8", (3 Used 4640 (B)) (2 Used 4840), Part Missing In Wise; 3/8" (With Dial-A-Matic), Part Missing In Wise; 3/8, Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf), Part Missing In Wise; 3/8", (2 On Level Land;1 On Sidehill), Part Missing In Wise; 3/8" (Use With 19h2284), Part Missing In Wise; 3/8" (Not Shown), Part Missing In Wise; 3/8" (For Ar68802), Part Missing In Wise; (C) 3/8", (Not Required With E55662), Part Missing In Wise; 9.525 mm, (Saran Cd), Part Missing In Wise; 3/8" Na, Part Missing In Wise; 3/8", (Used With Gresen Valve), Part Missing In Wise; 3/8" (920, 922, 925 And 930), Part Missing In Wise; 3/8", For 3.0 M (10') Size, Part Missing In Wise; 3/8", (Not Required With E55662) (3011, 3016), Part Missing In Wise; 3/8", (Use With Re30427), Part Missing In Wise; 3/8", For 8-Tooth Section, Part Missing In Wise; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Part Missing In Wise; 3/8", (5 Used Syncro-Range) (6 Used Power Shift), Part Missing In Wise; (B: Less Rockshaft) 3/8", Part Missing In Wise; 3/8", (Use With T25701), Part Missing In Wise; 3/8", (4 Used Dual Selective Control), Part Missing In Wise; 3/8" (Rigid), Part Missing In Wise; 3/8", (Use With 24m7096), Part Missing In Wise; (A: (-Xxxxxx) 4650-0065; 4850-0001 (Pst)) 3/8", Part Missing In Wise; 3/8" (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Alternator To Dash), Part Missing In Wise; (Nlr With R41041), Part Missing In Wise; 3/8", (Hb-G, Gh-01), Part Missing In Wise; 3/8", (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Use With R82180 Or R100676) Code 2501 And 2503, Part Missing In Wise; 3/8", (Rc And St), Part Missing In Wise; 3/8", (Use With 19h2284), Part Missing In Wise; 3/8" (132", -6874; 154", -6809), Part Missing In Wise; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Part Missing In Wise; 3/8", (Or), Part Missing In Wise; 3/8", (Use With 19h3219), Part Missing In Wise; 9.525 mm (3/8"), Part Missing In Wise; 3/8", (Rs, Ru, Rus, Ut, Or), Part Missing In Wise; 3/8" (Use With At24256 Or At31394), Part Missing In Wise; 3/8" (No Longer Required), Part Missing In Wise; 3/8", For 915, Part Missing In Wise; 3/8" (For 19h2676, 19h1648), Part Missing In Wise; 3/8", (Adjustable Rear Axle), Part Missing In Wise; 3/8" (918 Rigid), Part Missing In Wise; (C: 42" Tire) 3/8", Part Missing In Wise; 3/8", (Use With R82180 Or R100676), Part Missing In Wise; 3/8", (Use With H108673), Part Missing In Wise; 3/8", (Not Req. With E55662), Part Missing In Wise; 3/8", (2 Used Single Selective Control) (4 Used Dual Selective Control), Part Missing In Wise; (Sub For R53668), Part Missing In Wise; 3/8", For 3.7 M (12') Size, Part Missing In Wise; 3/8" (For R57059), Part Missing In Wise; 3/8" (Nlr), Part Missing In Wise; (A: (-Xxxxxx)4755-0103;4955-0124) 3/8", Part Missing In Wise; 3/8" (Sgb), Part Missing In Wise; 3/8", (120 Used L.H.) (120 Used R.H.), Part Missing In Wise; 3/8" (Less Rockshaft), Part Missing In Wise; 3/8", (Use With H149504), Part Missing In Wise; 3/8", 2350, Part Missing In Wise; 3/8", (Code 2819), Part Missing In Wise; 3/8", (Cable), Part Missing In Wise; (A: Code 2501) (B: Code 2502) 3/8", Part Missing In Wise; 3/8", (Cab), Part Missing In Wise; 3/8" 918 (6501-) 75 Used, Part Missing In Wise; 3/8", (1 Used L.H.) (1 Used R.H.), Part Missing In Wise; (Lu) (Orchard Fenders), Part Missing In Wise; 3/8", (Dn-02), Part Missing In Wise; 3/8" (Sub For (2) Mg80680), Part Missing In Wise; 3/8" (Use With R53396), Part Missing In Wise; 3/8", (Not Req. W/E55662), Part Missing In Wise; Ar, 3/8", Part Missing In Wise; 3/8", (Code 2111 And 3904), Part Missing In Wise; 3/8", (Use With Am124305 Front Frame), Part Missing In Wise; 3/8" (Code 4101), Part Missing In Wise; 3/8" (Level Land), Part Missing In Wise; 3/8" 3/8", Part Missing In Wise; (A: Mexico) (B: Turkey) 3/8", Part Missing In Wise, Part Missing In Wise; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8" (No Longer Required With R41041), Part Missing In Wise; 3/8", (Sub For T12634), Part Missing In Wise; 3/8", (Lp-Gas), Part Missing In Wise; 3/8", Used With Steel Moldboard, Part Missing In Wise; 3/8" Nla, Part Missing In Wise; 3/8", For 600 And 610, Part Missing In Wise; (B: Engine Serial No.) 3/8", Part Missing In Wise; (B: Radar Bracket To Transmission Sump Line Shield Bracket Screw) 3/8", Part Missing In Wise; 3/8", (A), Part Missing In Wise; (A) 3/8", Mechanical Front Wheel Drive, Part Missing In Wise; 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Part Missing In Wise; 3/8", Ar, Part Missing In Wise; (B: (Xxxxxx-) Esn 4650-3215; 4850-3246) 3/8", Part Missing In Wise; (A: From Sr.No. 5038d(0062-)) 3/8", Part Missing In Wise; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Part Missing In Wise; (A: From Sr.No.5103s/5203-1272, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Part Missing In Wise; 3/8" (Sgb) Nlr, Part Missing In Wise; (A: Power Shift Transmission) 3/8", Part Missing In Wise; 3/8", (Sub K40003, This Application Only), Part Missing In Wise; (A: W/O Sound-Gard Body) 3/8", Part Missing In Wise; (K) 3/8", Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 24" X 8" X 14" 20pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8" (Flexible), Part Missing In Wise; (B: (Xxxxxx-) 4560-0021; 4760-0079; 4960-0006) 3/8", Part Missing In Wise; 3/8", (Sub For R53668), Part Missing In Wise; (A) (B) 3/8", Part Missing In Wise; 3/8", Internal Tooth, Part Missing In Wise; 3/8", (Ea-G, Ge-01), Part Missing In Wise; 3/8" (Use With Delco-Remy), Part Missing In Wise; 3/8", Code 2314 (Af Only), Part Missing In Wise; 3/8" (4 Used, Rh; 5 Used, Lh), Part Missing In Wise; (A: Use With Ar87205) 3/8", Part Missing In Wise; 3/8", (Use With 14h1076 And 19h3239), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0013; 8650-0023) 3/8", Part Missing In Wise; 3/8", For Spike-Tooth Sections, Part Missing In Wise; 3/8" (W/O Sgb), Part Missing In Wise; 3/8", (Use With 19h3239), Part Missing In Wise; (C: 3 Used Triple, 4 Used Quad) 3/8", Part Missing In Wise; 3/8" (Use With Re61087), Lock Washer; 3/8", (Use With R125195), Part Missing In Wise; X, Part Missing In Wise; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Part Missing In Wise; 3/8", (Use With Re33058), Part Missing In Wise; 3/8", (Nlr), Part Missing In Wise; (A: For Steel Moldboard) 3/8", Part Missing In Wise; (A: W/O Sgb) 3/8", Part Missing In Wise; 3/8", (Less Power Steering), Part Missing In Wise; 3/8", (Use With R59409 Or R81072), Part Missing In Wise; 3/8", For 4.6 M (15') Size, Part Missing In Wise; 3/8" (Sub T56055), Part Missing In Wise; (A: For Switzerland Only) 3/8", Part Missing In Wise; 3/8", (Mower Bar Only), Part Missing In Wise; (A) (B) (C) (D) 3/8", Part Missing In Wise; (Orchard Fenders), Part Missing In Wise; (A: (-Xxxxxx) 4650-0177; 4850-0115) 3/8", Lock Washer; 9.525 mm (3/8"), Part Missing In Wise; 3/8", 1350, Part Missing In Wise; 3/8", (Use With 19h2104 And 19h2855), Part Missing In Wise; 3/8", (Code 3903), Part Missing In Wise; 3/8", For 400, Part Missing In Wise; 3/8" To Secure Battery Cables To Frame, Part Missing In Wise; 3/8", For 15'3" Harrow, Part Missing In Wise; 3/8" (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; 3/8" (A), Part Missing In Wise; 3/8" (Use With 19h3239), Part Missing In Wise; 3/8", Terminal, Part Missing In Wise; 3/8" (Not Required W/E55662), Part Missing In Wise; 3/8", For 3179dl001, Part Missing In Wise; (A) 3/8", Part Missing In Wise; 3/8" (Use With H149504), Part Missing In Wise; 3/8" (Sub For R53668), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8", Part Missing In Wise; (A: (-Xxxxxx) Esn 4650-3214; 4850-3245) 3/8", Part Missing In Wise; 3/8", (750), Lock Washer; 3/8", (Sub For Ffsb107931), Part Missing In Wise; 3/8", (Use With R81911) Code 2501 And 2503, Part Missing In Wise; 3/8" (34 Harvester), Part Missing In Wise; (A: Contained In Ar94567) 3/8", Part Missing In Wise; (A: 5045d(0075-), 5055d(0019-), 5045e(0074-), 5055e(0075-), 5065e(0002-), 5075e(0021-)) 3/8", Part Missing In Wise; 3/8", For 810, Part Missing In Wise; (F: Used With Steel Moldboard) 3/8", Part Missing In Wise; 3/8", (13 Used, Rc And St) (11 Used, Ru And Or), Part Missing In Wise; 3/8", For 10' Harrow, Part Missing In Wise; (Use With 19h2284), Part Missing In Wise; 3/8", (St), Part Missing In Wise; 3/8", (Use With Ar77343), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8" (Nlr), Part Missing In Wise; 3/8" (For 19h3267), Part Missing In Wise; (A) 3/8", (No Longer Available), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8", Used With Fiber Glass Seed Hopper, Part Missing In Wise; 9.525 mm (3/8") (Use With 19h1936), Part Missing In Wise; 3/8", (Rc, Ru, Rus), Part Missing In Wise; 3/8", (Not Required With 19h1936), Part Missing In Wise; 3/8", (2 Used, Variable Drive; 4 Used, Long), Part Missing In Wise; 3/8", (Code 6205), Part Missing In Wise; (A: (-Xxxxxx)4560-0027;4760-0050;4960-0054) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) (Use With 19h3219), Part Missing In Wise; 3/8", (Use With R125586), Part Missing In Wise; 3/8" (Pst), Part Missing In Wise; 3/8", Used On Beet Planter, Part Missing In Wise; (B: 24 And 224 Balers) 3/8", Part Missing In Wise; (E) 9.525 mm (3/8"), Part Missing In Wise; 3/8" (A), (B), Lock Washer; 3/8", (Use With 19h3239), Part Missing In Wise; 3/8", (Sub R44302), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Part Missing In Wise; 3/8", (Not Longer Required), Part Missing In Wise; (No Longer Required), Part Missing In Wise; 3/8", (Use With 24h1303), Part Missing In Wise; 3/8" Lh, Part Missing In Wise; 3/8", (Use With R59409), Part Missing In Wise; 9.525 mm, Part Missing In Wise; 3/8", (Sub K40003, This Application), Part Missing In Wise; 3/8", (2 Used Single) (4 Used Dual), Part Missing In Wise; 3/8" Battery Terminal (1 Used Single Battery) (2 Used Dual Battery) (Use With Ar66424), Part Missing In Wise; 3/8", (Use With A24646 Or A24647 And A24651), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8" (Nlr), Part Missing In Wise; 3/8" (Not Req. With E55662), Part Missing In Wise; 3/8", (Mower Bar), Part Missing In Wise; 3/8", (Cornhead Attachment), Part Missing In Wise; 3/8", (Ru, Rc), Part Missing In Wise; (Sub F16202), Part Missing In Wise; 3/8", 28-Inch Rows, Part Missing In Wise; (A: Engine Serial No.) 3/8", Part Missing In Wise; (C), Part Missing In Wise; 3/8", (Code 1701, 1702 And 1703), Part Missing In Wise; 3/8", Code 3905, Part Missing In Wise; 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Use With Ar11116), Part Missing In Wise; 3/8" (Rg), Part Missing In Wise; 3/8" (8 Used Dual) (12 Used Triple), Part Missing In Wise; 3/8", (No Longer Required With R41041), Part Missing In Wise; (B) 3/8", Part Missing In Wise; 3/8" (Qrt), Part Missing In Wise; 3/8", (Use With R114130, 14h812 And 19h3219), Part Missing In Wise; 3/8" (Not Required), Part Missing In Wise; 3/8", (Code 2108), Part Missing In Wise; 3/8" (D), Part Missing In Wise; 3/8" (No Longer Required, This Application), Part Missing In Wise; 3/8", (Motorola), Part Missing In Wise; 3/8" (Nla), Part Missing In Wise; 5/16", Part Missing In Wise; 3/8", (No Longer Required), Part Missing In Wise; 3/8", (Code 2101, 2102, Or 2109), Part Missing In Wise; 3/8" (Fan To R100682, R100676, R90561 Or R82180) Code 2314 (Af Only), Part Missing In Wise; 3/8", (Use With 14h1076), Part Missing In Wise; 3/8", (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Use With Ar55094), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8", Part Missing In Wise; (A: From Sr. No. 5103s-0091, 5203-0082, 5104/5204/5038d-0001.) 3/8", Part Missing In Wise; (B) 3/8", (Sub For R1870r), Part Missing In Wise; (C: Carbon Brush Conductor) 3/8", Part Missing In Wise; 3/8", For Gauge Shoe, Part Missing In Wise; 3/8", For R128566, R131753, Part Missing In Wise; 3/8", (Ea-D, Ea-G, Ha-G, De-01, Ge-01), Part Missing In Wise; (C: 5303 (-0007), 5403 (-0042).) 3/8", Part Missing In Wise; 3/8", (Use With 19h2676), Part Missing In Wise; 3/8", Fertilizer Opener, Part Missing In Wise; No 10, Part Missing In Wise; (A: From Sr.No. 5103s(0167-), 5104(0162-), 5204(00*15-)) 3/8", Part Missing In Wise; (A) (C) 3/8", Part Missing In Wise; X X X 3/8", Part Missing In Wise; 3/8", (Delco-Remy), Part Missing In Wise; (Code 1709), Part Missing In Wise; 3/8", (Use With Ar87024 Or Ar87023), Part Missing In Wise; 3/8", 4020 Or 4010 Tractor, Part Missing In Wise; (A) (B) 9.525 mm (3/8"), Part Missing In Wise; 3/8", (To Clip), Part Missing In Wise; 3/8", 2 Or 4 Used, Part Missing In Wise; 3/8", (Used With Victor Valve), Part Missing In Wise; 3/8", (Row-Crop), Part Missing In Wise; 3/8", (Use With Re19265), Part Missing In Wise; 3/8", For B27852 Only, Part Missing In Wise; 3/8" Low, Part Missing In Wise; 3/8" (A) (B), Part Missing In Wise; 3/8", (1 Used Single Selective Control) (2 Used Dual Selective Control), Part Missing In Wise; 3/8", (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; (A), Part Missing In Wise; 3/8", (Code 7001, 7002, 7003, And 7004), Part Missing In Wise; 3/8", Code 2311(Af, Af001), Part Missing In Wise; 3/8", (4 Used, Variable Drive; 6 Used, Long), Part Missing In Wise; 3/8", External Tooth, No. 10, Part Missing In Wise; 3/8" Ar, Part Missing In Wise; 3/8", (A), (D), Part Missing In Wise; (C) 3/8", Part Missing In Wise; 3/8", Part Missing In Wise; 3/8", 8650 Tractor, Part Missing In Wise; 3/8", (31 Used, 6'; 43 Used, 8'), Part Missing In Wise; 3/8", (Use With Ar36849), Part Missing In Wise; 3/8", (Regular), Part Missing In Wise; 3/8" (Use With R191204), Part Missing In Wise; (A: Assembly Listed Below Contains All Parts Identified By (A):) 3/8" (Use With R59409), Part Missing In Wise; 3/8", (No Longer Available), Part Missing In Wise; (A: Quad-Range Transmission) 3/8", Part Missing In Wise; 3/8", (Afd - No Longer Required), Part Missing In Wise; (E) 3/8", (Use With Ar66424), Part Missing In Wise; 3/8", Code 3907, Part Missing In Wise; 3/8" 3\8", Part Missing In Wise; 3/8", (Code 4101), Part Missing In Wise; 3/8" (Not Required W/E55662 Or 14h1090), Part Missing In Wise; (D) 3/8", Part Missing In Wise; 3/8" ((1) Per Spare Shear Bolt), Part Missing In Wise; 3/8" (6620 Sidehill), Part Missing In Wise; (A) 3/8", Outer, Part Missing In Wise; 3/8", 28" Rows Only, Part Missing In Wise; 3/8", For 6-Tooth Section, Part Missing In Wise; 3/8", 4010 Or 4020 Tractor, Part Missing In Wise; 3/8", (Saran Cd), Part Missing In Wise; 3/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Part Missing In Wise; 3/8", (Sub T56055), Part Missing In Wise; (A: No Longer Required) 3/8", Part Missing In Wise; 3/8", (18 Used Steel Pan) (21 Used Cast Iron Pan), Part Missing In Wise; 3/8", (6401), Part Missing In Wise; 3/8", (Not Required), Part Missing In Wise; 3/8", (Use With Ar66424 Or At25619), Part Missing In Wise; 3/8", (Not Req W/ E55662), Part Missing In Wise; (A) (B) (D) (E) 3/8", Part Missing In Wise; 3/8", (650), Part Missing In Wise; 3/8", (K1) (K2), Part Missing In Wise; 3/8" (Use With Motorola), Part Missing In Wise; 3/8", No. 20 Hitch, Part Missing In Wise; 3/8" (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Or, Rs, Rus, Ut), Part Missing In Wise; Internal-Tooth, No. 10, Part Missing In Wise; 3/8" (Use With Ae24403), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662), Part Missing In Wise; 3/8", (16 Used, 6'; 24 Used, 8'), Part Missing In Wise; 3/8", Code 2311 (Tf) (Pulley To Fan Spacer)	2
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2
A1***36	Tee Fitting	1
A1***36	Adapter	1

See all parts with full part numbers in Heavy Parts AI →

Lever Lock (1975- ) (For John Deere 4030, 4230, And 4430 Tractors) [A24]

John Deere : F325 - Plow, Moldboard (Integral) : Lever Lock (1975- ) (For John Deere 4030, 4230, And 4430 Tractors) [A24]

AR***05

Lock, Lock; Scv Lever, (Sub R52667), Lock; (Sub R52667)

See all parts with full part numbers in Heavy Parts AI →

Lever Lock (1975-1975) (For John Deere 2520, 2630, 3020, 4000, 4020, 4230, 4320 And 4430 Tractors) [A24]

John Deere : F325 - Plow, Moldboard (Integral) : Lever Lock (1975-1975) (For John Deere 2520, 2630, 3020, 4000, 4020, 4230, 4320 And 4430 Tractors) [A24]

AR***21

Spring, Spring; (Sub R51302)

See all parts with full part numbers in Heavy Parts AI →

Lever Lock (For John Deere 1520, 2010, And 2020 Tractors Using The John Deere Hydraulic System With 3-Bottom Plow) [A23]

John Deere : F325 - Plow, Moldboard (Integral) : Lever Lock (For John Deere 1520, 2010, And 2020 Tractors Using The John Deere Hydraulic System With 3-Bottom Plow) [A23]

12***03	Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70*00) 9550sh (-7000)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 7057-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-0087; 4250-0113; 4450-0214) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-0146; 4850-0032) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-0095; 4450-01*85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)	1
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	1
24***20	Washer; 29/64" X 3/4" X 0.035" (Use With Kv14830), Washer; (A) 29/64" X 3/4" X 0.035", Washer; 29/64" X 3/4" X 0.035", Washer, Washer; 29/64" X 3/4" X .036", Washer; 29/64"X3/4"X.036"	1
T2***04	Washer; (A), Washer	1

See all parts with full part numbers in Heavy Parts AI →

Lever Lock (For John Deere 2510, 3010, And 3020 ( -123,000) 4010 And 4020 ( -201,000) Tractors Using The John Deere Hydraulic System) [A20]

John Deere : F325 - Plow, Moldboard (Integral) : Lever Lock (For John Deere 2510, 3010, And 3020 ( -123,000) 4010 And 4020 ( -201,000) Tractors Using The John Deere Hydraulic System) [A20]

12***02	Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70*00) 9550sh ( -7000)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (7001- ) 9550sh (70*01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual)	2
14***86	Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-0100; 4255-0100; 4455-0200) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-0030; 8760-0021; 8960-0036) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-7000) 9550sh (-7000)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-7000) & 9750sts (-70*00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"	2
19***27	Cap Screw; (A) 1/4" X 1/2", Cap Screw; 1/4" X 1/2", (Ru), Cap Screw; 1/4" X 1/2" (12a) (Sub N219889 Appl), Cap Screw; 6.350 X 12.700 mm (1/4" X 1/2"), Cap Screw; 1/4" X 1/2", Not Used With Double Attachment, Cap Screw; 1/4"X1/2", Cap Screw; 1/4" X 1/2", (Use With 12h302 And 14h786), Cap Screw; 1/4" X 1/2", (Sub For Mg280279), Cap Screw; 6.350 X 12.700 mm, Cap Screw; 1/4" X 1/2", Kit Ar69585 And Ar73922, Cap Screw; 1/4" X 1/2", (20 Used For 714, 714a; 26 Used For 716, 716a), Cap Screw; 1/4" X 1/2" (Use With 12h302), Cap Screw; (A: ( -Xxxxxx) 8570-00*55; 8770-0077: 8870-00**88) 1/4" X 1/2", Cap Screw; 1/4" X 1/2", With Power Rear Wheel Drive, Cap Screw; (B) 1/4"X1/2", Cap Screw; 1/4" X 1/2" (Use With 24h1287 And 14h786), Cap Screw; 1/4" X 1/2", 4-Wheel Drive Only, Cap Screw; 1/4" X 1/2" (Dip And Pour Elevator), Cap Screw; 1/4" X 1/2" 1/4" X 1/2" Socket Head, (Sub For (2) Mg280273), Cap Screw; (E) 1/4" X 1/2", Cap Screw; 1/4" X 1/2", (Less Germany, France And Italy), Cap Screw; 1/4" X 1/2" (Sub H89095, This Application), Cap Screw, Cap Screw; (B) 1/4" X 1/2", Cap Screw; 1/4" X 1/2", (Kits Ar69585 And Ar73922), Cap Screw; 1/4" X 1/2" (Used With Straw Chopper), Cap Screw; (C) 1/4" X 1/2", Cap Screw; 1/4" X 1/2" (High Strength), Cap Screw; (A) 1/4"X1/2", Cap Screw; 1/4" X 1/2", (Sub For Ar28756), Cap Screw; 1/4" X 1/2", (Dip And Pour Elevator), Cap Screw; X 1/4" X 2", Cap Screw; 1/4 X 1/2", Cap Screw; 1/4" X 1/2", Cap Screw; 1/4" X 1/2" (Use With 14h786), Cap Screw; 1/4" X 1/2" For Re502828, Cap Screw; 1/4" X 1/2", (Used With Code 1405), Cap Screw; 1/4" X 1/2", Cap Screw; 1/4" X 1/2" Incld In 6, Cap Screw; 1/4x1/2", Cap Screw; 1/4" X 1/2", (Use With Straw Chopper), Cap Screw; (D) 1/4" X 1/2", Cap Screw; 1/4"X2-1/2", Cap Screw; (C) 1/4"X1/2", Cap Screw; 1/4" X 1/2" (Use With Bp13712)	2
A1***64	Strap	1

See all parts with full part numbers in Heavy Parts AI →

Lever Lock (For John Deere 2520 (017,001- ), 3020 (123,001- ), 4000 And 4020 (201,001- ) Tractors Using The John Deere Hydraulic System) [A22]

John Deere : F325 - Plow, Moldboard (Integral) : Lever Lock (For John Deere 2520 (017,001- ), 3020 (123,001- ), 4000 And 4020 (201,001- ) Tractors Using The John Deere Hydraulic System) [A22]

19***20	Cap Screw; 5/16"X1/2" (For Ar71938), Cap Screw; 5/16" X 1/2", (Sub For Aw12765), Cap Screw; 5/16" X 1/2", (444 And 643), Cap Screw; (A), Cap Screw; 5/16"-18 Nc X 1/2", Cap Screw; 5/16" X 1-1/2", Cap Screw; 5/16"X1/2" (For Ar64567, Ar87885), Cap Screw; 5/16" X 1/2" (6 Used 3rd) (8 Used 4th), Cap Screw; 5/16" X 1/2" (Hs, Sae 8), Cap Screw; 5/16" X 1/2" (5 Used Dual) (4 Used Triple), Cap Screw; (B: (Xxxxxx- ) Tractor Serial No. 8450-00*01; 8650-0001) 5/16" X 1/2" (4 Used Dual) (6 Used Triple) (8 Used Quad), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 5/16" X 1/2", Cap Screw; 7.925 X 12.700 mm, Cap Screw; (A: Hitch) 5/16" X 1/2", Cap Screw; 5/16" X 1/2" Use With Double Rib Wheel, Cap Screw; 5/16" X 1/2", (Sub For 19h2038), Cap Screw; 5/16"X1/2", Cap Screw; 5/16"X1/2" (For Ar64567), Cap Screw; 5/16" X 1/2", (45 Used 12 Ft., 60 Used 15 Ft.), Cap Screw; 5/16" X 1/2" (A), Cap Screw; 5/16" X 1/2" (With Lock Washer), Cap Screw, Cap Screw; 5/16" X 1/2" (6 Used Triple) (8 Used Quad), Cap Screw; (Sub For Aw12765) (Use With 12m7032), Cap Screw; 5/16" X 1/2" R.H. Front, Cap Screw; 5/16" X 1/2", Cap Screw; 5/16" X 1/2" Fuel Drain, Cap Screw; 5/16" X 1/2", (Used With At79254 Cover), Cap Screw; 5/16" X 1/2", Cap Screw; 5/16" X 1/2", Cowl To Control Support, Cap Screw; (F: Use With Double Rib Wheel) 5/16" X 1/2", Cap Screw; 5/16" X 1/2", W/ 24m7055 & T35699, Cap Screw; (A) (B) 5/16" X 1/2", Cap Screw; 5/16" X 1/2" (For Ar78885), Cap Screw; 5/16"-18 Unc X1/2", Cap Screw; 5/16" X 1/2", (Use With 12h303 And 14h785), Cap Screw; 7.925 X 12.700 mm (5/16" X 1/2"), Cap Screw; 5/16" X 1/2" (Use With 14h785), Cap Screw; 5/16" X 1/2", (Sub For E44141) (Sub Gwxd172), Cap Screw; (B) 5/16" X 1/2", (Ut), Cap Screw; 5/16" X 1/2", (Nla), Cap Screw; (B) 5/16" X 1/2", Cap Screw; 5/16" X 1/2" (2 Used, Regular; 4 Used, Special), Cap Screw; 5/16" X 1/2" (For Ar64567), Cap Screw; (A) 5/16" X 1/2", Cap Screw; 5/16" X 1/2" (For Ar87885)	1
24***87	Washer; 17/64"X5/8"X.048", Washer; 9/32" X 5/8" X 0.065" 9/32" X 5/8" X 0.060", Washer; 9/32" X 5/8" X 0.065" (Use With R133450), Washer; 9/32" X 5/8" X 0.065" (Sub For 24m7055), Washer; (B: Not Included) 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065", 4.6 M (15') Box, Washer; 7.137 X 15.875 X 1.651 mm, (Sub For 24m7055), Washer; 9/32" X 5/8" X 0.065" (A), Washer; (Use With R90127), Washer; 9/32" X 5/8", Washer; 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065", Kit Ar69585 And Ar73922, Washer; 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065" (Use With An281515), Washer; 9/32" X 5/8" X 0.065", (1 Used Gasoline) (2 Used Diesel), Washer; 9/32" X 5/8" X 0.065", Rubber, Washer; 9/32" X 5/8" X 0.065" (5460, 5820, 8630, 8640, 8650), Washer; 9/32" X 5/8" X 0.065" (Use With Re65878), Washer; 9/32" X 5/8" X 0.065", Sweden Only, Washer; Flat, Black, 1/4", Washer; 9/32" X 5/8" X 0.065", (Sub For R3031r), Washer; 7.137 X 15.875 X 1.651 mm (9/32" X 5/8" X 0.065"), Washer; 9/32" X 5/8" X 0.065", Hinge Pin, Washer; 7.137 X 15.875 X 1.651 mm (9/32" X 5/8" X 0.065") (Sub For Ffsb109336), Washer; 9/32" X 5/8" X 0.065", (Sub For Mg508188), Washer; 9/32" X 5/8" X 0.065" Low Shaft Speed Monitor, Washer; 9/32" X 5/8" X 0.065", Dry Hill-Drop Only, Washer; 9/32" X 5/8" X 0.065", (Corn Head Attachment), Washer; 9/32" X 5/8" X 0.065", Liquid Hill-Drop Only, Washer; (A) 9/32 X 5/8" X .060", Washer; 9/32" X 5/8" X 0,060", Washer; 9/32" X 5/8" X 0.065", (Code 1637), Washer; (A: 6076trw07 Only) 9/32" X 5/8" X 0.065", Washer; 1/4", Washer; 7.137 X 15.875 X 1.651 mm, Washer; 9/32" X 5/8" X 0.065" (Belt Drive), Washer; .060" X 9/32" X 5/8", Washer; 9/32" X 5/8" X 0.065" (Shut-Off), Washer; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 9/32" X 5/8" X 0.065", Washer; (B: W/O Cab) 9/32" X 5/8" X 0.065", Washer; (Use With R112197), Washer; 9/32" X 5/8" X0.065", Washer; 1/4" X 1", Washer; (A) (B) 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065", (Sub For He526-0018) (Sub 24h1287), Washer; 9/32" X 5/8" X 0.060", (Use With Straw Chopper), Washer; 9/32" X 5/8" X 0.065", (Sub E91190), Washer; (A) 9/32"X5/8"X.060", Washer; 9/32" X 5/8" X 0.065", Not Used This Application, Washer; 9/32"X5/8"X.060", Washer; 9/32" X 5/8" X 0.065", (Sub For Et13804), Washer; 9/32" X 5/8"X 0.065", Washer; 1/4"X3/4"X.060", Washer; 9/32" X 5/8" X 0.065" (Nlr), Washer; 17/64"X5/8"X.048" (Sub For 24h1714), Washer; 9/32" X 5/8" X .060", Washer; 9/32" X 5/8" X 0.065", (Sub For Ffsb109336), Washer; 9/32" X 5/8" X 0.065", (Corn Head And One Row Ear Corn Units), Washer; 9/32" X 5/8" X 0.065", (35 Used For 714, 714a; 41 Used For 716, 716a), Washer; 9/32" X 5/8" X 0.065" 1/4" X 1", Washer; 9/32" X 5/8" X 0.065" (4 X 12), Washer; 9/32" X 5/8" X 0.065", (No Longer Required), Washer; 9/32" X 5/8" X 0.065", (Nicht Mehr Bendetigt), Washer; 9/32" X 5/8" X 0.065", (Sub For Et12293), Washer; 9/32" X 5/8" X 0.065" 9/32" X 5/8" X 0.048", Washer; 9/32" X 5/8" X 0.065", (Kits Ar69585 And Ar73922), Washer; (B: Not Included In Kit) 9/32" X 5/8" X 0.065", Washer, Washer, Washer; 9/32" X 5/8" X 0.065", (Export), Washer; 17/64x5/8"X.048", Washer; 9/32" X 5/8" X 0.065", (243, 5 Used; 343, 10 Used), Washer; 9/32"X5/8", Washer; (E: (Xxxxxx- ) 7610-00*44; 7710-0091; 7810-00**84) 9/32" X 5/8" X 0.065", Washer; 7.137 X 15.875 X 1.651 mm, Washer; 9/32" X 5/8" X 0.065" (No Longer Required), Washer; 9/32" X 5/8" X 0.065" For Re502828, Washer; 9/32" X 5/8" X 0.065", (Sub For A3031r), Washer; (A) 9/32" X 5/8" X 0.065", Washer; (A) 9/32" X 5/8" X 0.065", (Sub An192150), Washer; 9/32x5/8", Washer; 9/32" X 5/8" X 0.060", Washer; 7.137 X 15.875 X 1.651 mm (9/32" X 5/8" X 0.065"), Washer; 9/32" X 5/8" X 0.065" (Use With 14m7273), Washer; 9/32" X 5/8" X 0.065", (1-Row Ear Corn Unit), Washer; 9/32" X 5/8" X 0.065", (Sub For Et10717), Washer; (C) 9/32" X 5/8" X 0.065", Washer; Flat, 1/4", Washer; (C), Washer; (B) 9/32" X 5/8" X 0.065", Washer; (A) (B) (C) 9/32" X 5/8" X 0.065", Washer; 9/32" X 5/8" X 0.065", (Sub For Et12282), Washer; 9/32" X 5/8" X 0.065", (Sub For Et12286)	2
24***92	Washer; 11/32"X3/4", Washer; 11/32" X 3/4" X 0.120" Used With P71246 Plastic Moldboard, Washer; 11/32" X 3/4" X 0.120" (Between Support And Engine), Washer; 11/32"X3/4"X.120", Washer; 11/32" X 3/4" X 0.120" (Use (4) As Spacers To Raise Bracket), Washer; (Use With Re49914), Washer; (G: Used With Plastic Moldboard) 11/32" X 3/4" X 0.120", Washer; 11/32" X 3/4" X 0.120", (Replaced R56397), Washer; 11/32" X 3/4" X 0.120" (Used With P71246 Plastic Moldboard), Washer; 8.738 X 19.050 X 3.048 mm (11/32" X 3/4" X 0.120"), Washer; (A) .11/32"X3/4"X.120, Washer; 11/32" X 3/4" X 0.120" (Sub H130177), Washer; 11/32" X 3/4" X 0.120", (Use With H130177), Washer; 11/32" X 3/4" X 0.120", (Sub For A3030r), Washer; 11/32" X 3/4" X .120", Washer; (A), Washer; (A) 11/32" X 3/4" X 0.120", Washer, Washer; 8.738 X 19.050 X 3.048 mm, Washer; 11/32" X 3/4" X 0.120" (Use With H130177), Washer; 11/32" X 3/4" X 0.120", (Sub For Mg252687), Washer; 11/32" X 3/4" X 0.120" 11/32" X 3/4" X 0.120", Washer; 11/32" X 3/4" X 0.120", (Sub For R56397, This Application), Washer; 11/32" X 3/4" X 0.120" (A), Washer; (Not Used This Application), Washer; 11/32" X 3/4" X 0.120" (Use Only When At80259 Is Used), Washer; 11/32" X 3/4" X 0.120", Washer; 11/32" X 3/4" X 0.120", (Code 3102), Washer; 11/32"X3/4"X0.120", Washer; 11/32" X 3/4" X 0.120" (Sub For R56397, This Application), Washer; 11/32" X 3/4" X 0.120", ( Used With Plastic Moldboard ), Washer; 11/32" X 3/4" X 0.120", Used With Plastic Moldboard, Washer; (A) (B) 11/32" X 3/4" X 0.120"	1
2***6	Cotter Pin; (Used With 40, 420 And 430 Special And Tricycle Tractors, Fordson Major And Similar Tractors), Cotter Pin; Spring Locking, Cotter Pin, Cotter Pin; (714a, 716a), Cotter Pin; For 600 And 610, Cotter Pin; (400), Cotter Pin; (600, 610), Cotter Pin; For 400, Cotter Pin; For 810, Cotter Pin; 1194 mm (47") (Sub For Mg37851), Cotter Pin; (Sub For Q23896), Cotter Pin; (C), Cotter Pin; (With Rear Unload), Cotter Pin; (Sub For S2955dw, This Application), Cotter Pin; (Use With Aw10999), Cotter Pin; Use With Steel Fingers, Cotter Pin; For 610, Cotter Pin; (Use With Gr28663), Cotter Pin; (Holds Wrench On Frame), Cotter Pin; (4 Used-Long Feeder House; 2 Used-Regular Feeder House) (Sub H95042), Cotter Pin; Outer, Cotter Pin; (Sub H95042), Cotter Pin; (Used With 430, 420, And 40 Special And Tricycle Tractors, Fordson Major And Similar Tractors), Cotter Pin; (810)	1

See all parts with full part numbers in Heavy Parts AI →

Manifold And Trip Hose [A21]

John Deere : F325 - Plow, Moldboard (Integral) : Manifold And Trip Hose [A21]

A1***30	Nut; (A), Nut; (B)	4
AA***12	Manifold; (B) (Four-Port)	1
AA***17	Hydraulic Hose; (A) 25 mm X 510 mm (31/32" X 20"), Hydraulic Hose; (B) 25 mm X 510 mm (31/32" X 20")	4
AA***87	Manifold; (A) (Three-Port)	1

See all parts with full part numbers in Heavy Parts AI →

Reflectors [A11]

John Deere : F325 - Plow, Moldboard (Integral) : Reflectors [A11]

12***02	Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70*00) 9550sh ( -7000)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (7001- ) 9550sh (70*01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual)	2
14***86	Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-0100; 4255-0100; 4455-0200) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-0030; 8760-0021; 8960-0036) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-7000) 9550sh (-7000)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-7000) & 9750sts (-70*00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"	2
21***02	Screw; 1/4" X 5/8" (Use With 14h786), Screw; 1/4"X5/8", Screw; 1/4" X 5/8", Screw; 1/4" X 5/8", Use With Endwise Transport	2
B1***10	Bracket; R.H., Bracket; Red, Bracket; Rear, Bracket, Bracket; Front, Bracket; For One Refelctor, Bracket; (A), Bracket; (B), Bracket; For One Reflector, 8'6"	1

See all parts with full part numbers in Heavy Parts AI →

Relief Valve (John Deere Hydraulic System) [A16]

John Deere : F325 - Plow, Moldboard (Integral) : Relief Valve (John Deere Hydraulic System) [A16]

12***03	Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70*00) 9550sh (-7000)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 7057-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-0087; 4250-0113; 4450-0214) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-0146; 4850-0032) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-0095; 4450-01*85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)	2
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	2
3***0	O-Ring; (Kit Ar78501), O-Ring, O-Ring; 3/32" X 7/8", O-Ring; (Sub For U11343, This Application), O-Ring; (B), O-Ring; (A), O-Ring; (A) (B), O-Ring; (A) (Sub For U11343 Appl), O-Ring; (Sub For U11343 Appl), O-Ring; (Sub For U11343), O-Ring; (A) (C), O-Ring; Ar, O-Ring; (Sub N130510, This Application), O-Ring; (B) 3/32" X 7/8", O-Ring; 21.895 X 2.616 mm (0.862" X 0.103"), O-Ring; (Sub For R48917, U11343), O-Ring; (Sub For R48917 Or U11343), O-Ring; 21.895 X 2.616 mm (0.862" X 0.103"), O-Ring; (Sub For R48917, U11343 Appl), O-Ring; (A) (Sub At15859)	1
34***27	Spring Pin, Spring Pin; 3/32" X 1/2", Spring Pin; 3/32"X1/2", Spring Pin; (A) 3/32" X 1/2"	1

See all parts with full part numbers in Heavy Parts AI →

Return Line Adapter (For John Deere 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4020, 4030, 4320 And 4430 Tractors) [A14]

John Deere : F325 - Plow, Moldboard (Integral) : Return Line Adapter (For John Deere 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4020, 4030, 4320 And 4430 Tractors) [A14]

A1***32	X; Plug - Port, Hi-Pressure, Adapter, X; Plug - Pressure Check Port, X; Plug - Pressure Check, Port, Adapter; (Iso To Jd) (For Tractor With Jd Couplers), Adapter; (A)	1
A1***98	Cap; Dust, Cap, Cap; (A: 9550 ( -69*00) 9550sh ( -6900)), O-Ring; "O" Ring - Seal, Relief Valve, Cap; (A: 9550 (6901- ) 9550sh (69*01- )), Cap; (Sub For Er124907 Appl), Cap; (Sub For L31745), Cap; (A: Not For Super Narrow Version) (Sub For Er124907 Appl), Cap; (Sub For W42411 Or Aw23624), Cap; Dust (With Dial-A-Matic)	1
AA***50	Elbow Fitting; (A), Elbow Fitting, Elbow Fitting; 45°	1
AA***42	Hydraulic.Quick Coupler P	1

See all parts with full part numbers in Heavy Parts AI →

Return Line Adapter And Hose ( -1972) (John Deere Hydraulic System) (John Deere 1520, 2010, And 2020 Tractors) [A15]

John Deere : F325 - Plow, Moldboard (Integral) : Return Line Adapter And Hose ( -1972) (John Deere Hydraulic System) (John Deere 1520, 2010, And 2020 Tractors) [A15]

15***90	Adapter; 1" X 1-1/2", Adapter; 1" X 1/2", Adapter; 1/2", Adapter	1
A1***98	Cap; Dust, Cap, Cap; (A: 9550 ( -69*00) 9550sh ( -6900)), O-Ring; "O" Ring - Seal, Relief Valve, Cap; (A: 9550 (6901- ) 9550sh (69*01- )), Cap; (Sub For Er124907 Appl), Cap; (Sub For L31745), Cap; (A: Not For Super Narrow Version) (Sub For Er124907 Appl), Cap; (Sub For W42411 Or Aw23624), Cap; Dust (With Dial-A-Matic)	1
A1***63	Adapter; (Sub R30816 And 15h590)	1
AA***42	Hydraulic.Quick Coupler P	1

See all parts with full part numbers in Heavy Parts AI →

Rolling Coulters, Cushion, 430 Mm (17-Inch) Plain And Rippled Edge ( -1971) (Cone Bearing) (Clamp And Round Shank) [B04]

John Deere : F325 - Plow, Moldboard (Integral) : Rolling Coulters, Cushion, 430 Mm (17-Inch) Plain And Rippled Edge ( -1971) (Cone Bearing) (Clamp And Round Shank) [B04]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	3
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	1
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	2

See all parts with full part numbers in Heavy Parts AI →

Rolling Coulters, Cushion, 430 Mm And 510 Mm (17- And 20-Inch)Plain And Rippled Edge ( -1972) (Anti-Friction Bearing) (Clamp And Round Shank) [B03]

John Deere : F325 - Plow, Moldboard (Integral) : Rolling Coulters, Cushion, 430 Mm And 510 Mm (17- And 20-Inch)Plain And Rippled Edge ( -1972) (Anti-Friction Bearing) (Clamp And Round Shank) [B03]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
11***37	Cotter Pin; 1/8" X 2", Cotter Pin; 1/8" X 2" (Sub 11m7083), Cotter Pin; 1/8"X2", Cotter Pin; (A) (C) 1/8" X 2", Cotter Pin; 1/8" X 2", (Lower), Cotter Pin; 1/8"X1-1/4", Cotter Pin; 1/8" X 2" Lower, Cotter Pin; (B) 1/8x2, Cotter Pin; (B) 1/8" X 2", Cotter Pin; (C) (D) 1/8" X 2", Cotter Pin; 1/8" X 2" 1/8" X 2", Cotter Pin; 3.175 X 50.800 mm, Cotter Pin; 1/8" X 2" 1/8" Dia. X 2", Cotter Pin; (B) (D) 1/8" X 2", Cotter Pin; (A) 1/8" X 2", 2520 Or 4000 Tractor; 3020 Tractor, Serial No. 12*00- ; 4020 Tractor, Serial No. 20*00- ., Cotter Pin; (A) 1/8" X 2", Cotter Pin; (A) (D) 1/8" X 2", Cotter Pin; (B) 1/8"X2", Cotter Pin; 1/8" X 2", (Sub 11m7083)	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	1

See all parts with full part numbers in Heavy Parts AI →

Rolling Coulters, Cushion, 460 Mm (18-Inch) Plain And Rippled Edge (1971- ) (Cone Bearing) (Clamp And Round Shank) [B05]

John Deere : F325 - Plow, Moldboard (Integral) : Rolling Coulters, Cushion, 460 Mm (18-Inch) Plain And Rippled Edge (1971- ) (Cone Bearing) (Clamp And Round Shank) [B05]

11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	3
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	1
14***21	Nut; 5/8", Jam, Nut; 5/8", R.H. (Use With Aa32826), Nut; 5/8" Jam, Nut; 5/8" Rh, Nut; (B) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8", R.H. Use With Aa32826 Only, Nut; (A: Germany) 5/8" (Use With 6 Or 8), Nut; 5/8", Jam, (Hoe), Nut; 5/8" 5/8", Nut; 5/8" (For Dc33913), Nut; (A) 6, (5/8"), Nut; (A) (B) 6, (5/8"), Nut; (A) 6, 8.5/8", Nut; X 5/8", Nut; 5/8", (Use With Ar26407), Nut, Nut; (B: Number Of Weights) 5/8" (6 Or 8), Nut; (A) 6, 8 5/8", Nut; 5/8", (1 Used Per Tooth Bar), Nut; (C) 5/8", Nut; 5/8" R.H., Nut; 5/8" (Rh Thread), Nut; 5/8", (Per Tooth Bar), Nut; (A) 6 Or 8, Nut; (A) 5/8", (Or, Rs, Ut), Nut; 5/8", Per Tooth Bar, Nut; 5/8" (Use With 12h294), Nut; 5/8", Each Additional Tooth Bar, Nut; (A) 6 8 5/8", Nut; (D) 5/8", Nut; (A) 6, 8, 5/8", Nut; (A) (B) 6, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8", Nut; (C: Used In 5415 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/8", (4 Used, 1217; 5 Used, 1219), Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; (A) 5/8", Jam, Nut; (A: 8 Weights) (C: 6 Weights) 5/8", Nut; 5/8", (Use With 23.1 Tire And All Tracks), Nut; 5/8", R.H., Nut; 5/8", Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8" (For Key 16), Nut; 5/8", 5/8", Nut; (A) 6, 8,5/8", Nut; X 5/8", Nut; 5/8", (5400, 6030), Nut; (A) (B) 6 Or 8, Nut; 5/8" (For Key 13), Nut; (E), Nut; 15.875 mm (5/8"), Nut; (A) 6,8,5/8", Nut; 15.875 mm (5/8") Jam, Nut; 5/8", R.H. Jam, Nut; 5/8", R.H., Jam, Nut; (A) 5/8"	2

See all parts with full part numbers in Heavy Parts AI →

Rolling Coulters, Cushion, 460 Mm And 510 Mm (18- And 20-Inch) Plain, Rippled, And Notched (1972-1976) [B06]

John Deere : F325 - Plow, Moldboard (Integral) : Rolling Coulters, Cushion, 460 Mm And 510 Mm (18- And 20-Inch) Plain, Rippled, And Notched (1972-1976) [B06]

11***16	Cotter Pin; 3/16" X 1", For 6-Row, Cotter Pin; 3/16" X 1", Cotter Pin; 3/16" X 1" 3/16" X 1", Cotter Pin, Cotter Pin; 3/16" X 1", (Sub R32507), Cotter Pin; 3/16" X 1", For 40-Tooth Section, Cotter Pin; 3/16" X 1", (Sub For A18135) For 4 Section, Cotter Pin; 3/16 X 1", Cotter Pin; (A) 3/16" X 1", Cotter Pin; (D) 3/16" X 1", Cotter Pin; 3/16" X 1", For Heavy Duty Scrapers, Cotter Pin; 3/16" X 1", (Sub For A18135) For 5 Section, Cotter Pin; 3/16" X 1", (Sub For Mg87397), Cotter Pin; (B) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Sections, Cotter Pin; 3/16" X 1", For 40-Tooth Sections, Cotter Pin; (B) (C) 3/16" X 1", Cotter Pin; 3/16" X 1", For 35-Tooth Section, Cotter Pin; 3/16" X 1", Extension Only, Cotter Pin; 3/16" X 1-1/2" (Sub For 11h218), Cotter Pin; 3/16" X 1", For 4w, 6n, 6w, Cotter Pin; 3/16"X1", Cotter Pin; 3/16"X3/4", Cotter Pin; 3/16"X3/8", Cotter Pin; 3/16" X 1", (4884, 4684, 5184, 5186)	1
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	2
11***50	Cotter Pin; 1/4" X 2-1/2", Cotter Pin	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	1

See all parts with full part numbers in Heavy Parts AI →

Stand [B01]

John Deere : F325 - Plow, Moldboard (Integral) : Stand [B01]

12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2
2***6	Cotter Pin; (Used With 40, 420 And 430 Special And Tricycle Tractors, Fordson Major And Similar Tractors), Cotter Pin; Spring Locking, Cotter Pin, Cotter Pin; (714a, 716a), Cotter Pin; For 600 And 610, Cotter Pin; (400), Cotter Pin; (600, 610), Cotter Pin; For 400, Cotter Pin; For 810, Cotter Pin; 1194 mm (47") (Sub For Mg37851), Cotter Pin; (Sub For Q23896), Cotter Pin; (C), Cotter Pin; (With Rear Unload), Cotter Pin; (Sub For S2955dw, This Application), Cotter Pin; (Use With Aw10999), Cotter Pin; Use With Steel Fingers, Cotter Pin; For 610, Cotter Pin; (Use With Gr28663), Cotter Pin; (Holds Wrench On Frame), Cotter Pin; (4 Used-Long Feeder House; 2 Used-Regular Feeder House) (Sub H95042), Cotter Pin; Outer, Cotter Pin; (Sub H95042), Cotter Pin; (Used With 430, 420, And 40 Special And Tricycle Tractors, Fordson Major And Similar Tractors), Cotter Pin; (810)	1
A1***26	Gasket - Input Accessory Drive Gear, Stand	1

See all parts with full part numbers in Heavy Parts AI →

Standard [A10]

John Deere : F325 - Plow, Moldboard (Integral) : Standard [A10]

10***15	Bolt; 1/2" X 3-1/4"	1
11***18	Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2

See all parts with full part numbers in Heavy Parts AI →

Need a specific F325 - PLOW, MOLDBOARD (INTEGRAL) part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.