John Deerecombine(no series)

John Deere 940 - COMBINE

Specifications · OEM parts breakdown

Search live 940 - COMBINE partsSource or supply its parts

Post a parts request and compare supplier quotes.

John Deere 940 - COMBINE specifications

Source-backed specifications

Engine Power75 hp
Fuel Tank Capacity105 L

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

All 940 - COMBINE assemblies by section

Every catalogued assembly group for the John Deere 940 - COMBINE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

10 Rear Axle
John Deere : 940 - Combine : 10 Rear Axle : Axle Spindle With Hub And Wheel [01a11]
11***16Cotter Pin; 1/8"X1", Cotter Pin; 3 X 25 mm, Cotter Pin; 3x28mm (For Al41600), Cotter Pin; 3 X 20 mm (Sub For 11m1382), Cotter Pin; 3,2x28mm, Cotter Pin, Cotter Pin; 3 2x28mm, Cotter Pin; 3x28mm (For Al68930), Cotter Pin; 3 X 28mm, Cotter Pin; 3.200x28mm, Cotter Pin; (A) 3.200 X 28 mm, Cotter Pin; (A) 3,200 X 28 mm, Cotter Pin; 3.200 X 28 mm, Cotter Pin; 3 X 30 mm, Cotter Pin; 3 X 30 mm (Sub For 11m1386), Cotter Pin; 3.2x28mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x28mm, Cotter Pin; (A: For Adjustable Rear Axle) 3.200 X 28 mm, Cotter Pin; 3x30mm, Cotter Pin; 3,200 X 28 mm2
11***24Pin; 4 X 36 mm 4 X 36 mm, Pin, Pin; 4x40mm, Pin; 4x36mm, Pin; 4 X 36 mm, Pin; 4 X 40 mm, Pin; M4 X 40, Pin; 4x30mm (For Z51894), Pin; 4 X 36mm (For Al56439, Al56440), Pin; 4 X 36 mm (For Al55432, Al55433), Pin; 4 X 36mm (For Al55432, Al55433), Pin; 4x36 Gb/79-2000 Zn D, Pin; (A) 4x36mm, Pin; 4 X 36mm, Pin; 5x50mm2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 10 Rear Axle : Rear Axle [01a09]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm2
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm20
14***22Nut; 10mm, Nut; M10, Nut; 10mm., Nut; 8mm20
See all parts with full part numbers in Heavy Parts AI →
11 Front Axle
John Deere : 940 - Combine : 11 Front Axle : Axle Support Bracket [01a15]
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)4
12***39Lock Washer; 20mm, Lock Washer; 20.200 mm, Lock Washer, Lock Washer; 20 mm4
14***31Nut; M6, Nut; M12 (D), Nut; M12, Nut; M12m, Nut; 12 mm, Nut; M12 (W/ E63932), Nut; 12 mm (W/ E63932) Key 3, Nut; M12 (For Z45182), Nut; 3/8", Nut; (A: For Exportation) M12, Nut; 12 mm (W/ Dc18663), Nut; M14, Nut; M12, M12, Nut; M12 (Sub For 14m7042) |, Nut; (A) (B) (C), Nut; Ar, M12 (Sub For 14m7042), Nut; (C: For Commandcenter) M12, Nut; 14 mm, Nut; (A) (B) (C) M12, Nut; M12 (Sub For 14m7042), Nut; M12 M12, Nut; 12 mm (W E63932) Key 3, Nut; M12 (W/ E63930), Nut; (A) M12, Nut; 12mm, Nut, Nut; Ar, M12, Nut; M12, (312) M12, Nut; M12 |, Nut; M12, (312), Nut; M12 (W/ Dc18663), Nut; M12 Sub For 14m7275, Nut; 12x1,75, Nut; (A), Nut; M12 (Sub For 14m7066), Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M12, Nut; M12, M8x80, Nut; (C) M12, Nut; M12, Rh, Nut; 12 mm (W/ E63930), Nut; M12 (W/ Dc18661)4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 11 Front Axle : Brake Pressure Ring [01a18]
AL***73Kit; (Sub Al57436, L56243 And L56244), Kit; Kit, Incl Keys (2) 3, (2) 41
AT***34Brake Disk; (Sub At63106), Brake Disk2
L3***03O-Ring; (Sub For R50703), O-Ring; (Sub L56243)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 11 Front Axle : Counter Shaft [01a23]
1***5Cotter Pin1
2***4Shaft Key; 3/16" X 3/4", (Sub 26h77), Shaft Key; 3/16" X 3/4", Shaft Key, Shaft Key; 3/16" X 3/4" (454a,-62***33; 653a,-62***83; 654a,-62***33; 655a And 853a,-62***07)1
2***3Shaft Key, Shaft Key; 5/16" X 1"1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 11 Front Axle : Front Axle, Front Wheels [01a19]
14***37Nut; (A) (Sub For 14m5829), Nut; (Sub For 14m5829), Nut; M18, Nut; (A) M18x1,5, Nut; (A) M18 X 1,5, Nut; 18mm, Nut; M18x1,5, Nut; M18 Grade 10.916
19***04Cap Screw; 1/2" X 2-1/4"24
19***93Cap Screw; Hs, Sae8, 1/2" X 1-1/2", Cap Screw; (A) 1/2"X1-1/2" (Sub For T20139), Cap Screw; 1/2" X 1-1/2" Mount, Pump, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2" Already On Machine, Cap Screw; Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", Hs, Sae 8,, Cap Screw; 1/2" X 1-1/2" (Used With Single Selective Control Valve), Cap Screw; 1/2" X 1-1/2", (Sub For T20139) (Sub R46162, This Application), Cap Screw; 1/2" X 1-1/2", (1501,1504,1520,1521,1525,1529), Cap Screw; 1/2"X 1-1/2", Cap Screw; 1/2"X1-1/2" (Ord 19h3299), Cap Screw; 12.700 X 38.100 mm, (Sae 8), Cap Screw, Cap Screw; 1/2" X 1-1/2", (Without Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/2", (Sub For R74444) Code 1503 Flywheel, Damper Type Clutch, Cap Screw; 1/2 X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8 (Ha-G) (Sub For T20139) (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", For 4 648 mm (15') Harrow, Cap Screw; 1/2" X 1-1/2" (B), Cap Screw; 1/2" X 1-1/2" 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" Hs, Sae, Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R58253, This Application) (1501, 1502, 1504 And 1505), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, Cap Screw; (A) (B) (C) 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2", (1501,1504,1512,1520,1521,1525), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162), Cap Screw; 1/2" X 1-1/2" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2", (5 Used L.H.) (5 Used R.H.), Cap Screw; (A: 9550 (-69***00) 9550sh (-69***00)) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (A), Cap Screw; 1/2" X 1-1/2", Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-3/4", Cap Screw; (A) 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" (Sub For R58253, This Application) Hs, Sae, Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1 1/2", Cap Screw; (Code 1302), Cap Screw; (B) (C) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2" (Sub For Cb01390891), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8) (Use With N161501), Cap Screw; 1/2" X 1-1/2", (Hs Sae 8), Cap Screw; (A: Incld In Cb11434198 Fan) 1/2" X 1-1/2" Torque To 80 Ft-Lbs, Cap Screw; 1/2" X 1-1/2", Connects Chain To Frame, Cap Screw; 1/2" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sub For 19h1721), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162, This Application), Cap Screw; (A) 1/2"X1-1/2", (Sub For 19h3025), Cap Screw; 12.700 X 38.100 mm (1/2" X 1-1/2") (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2", Cap Screw; (A) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For R58253, This Application), Cap Screw; 1/2" X 1-1/2", Code 1503, (Sub For R74444, This Application), Cap Screw; 1/2" X 1-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; Hs, Sae 8, 1/2 X 1-1/2", Cap Screw; 1/2" X 1.1/2", Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" Hs. Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8 (1/2" X 1-1/2"), Cap Screw; 1/2" X 1-1/2", (1503) (Sub For R74444), Cap Screw; 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1/2", Cap Screw; 12.700 X 38.100 mm, Incld In 1, Cap Screw; 1/2" X 1-1/2", (2 Used L.H.) (2 Used R.H.), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1501,1502,1504,1505), Cap Screw; (A) 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sae 8), Cap Screw; 1/2"X1-1/2" (Ord 19h2473, R109086), Cap Screw; 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; (A) 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2", (Sub R84978 And R109086, This Application), Cap Screw; 12.700 X 38.100 mm, Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 12.700 X 38.100 mm, Already On Machine2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 11 Front Axle : Front Wheels [01a17]
AZ***87Tire Valve Stem, Tire Valve Stem; (C)2
AZ***25Rim; W12x24, Rim; W12 X 24, Rim; W 12 X 242
AZ***15Rim; Dw14 X 26, Rim; Dw14 X 26 (Sub For Az17080), Rim; Dw14x262
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 11 Front Axle : Gear Shifting Parts [01b01]
15***55Pipe Plug; 3/8.Sq, Pipe Plug; 3/8", Sq. Hd. (Starting Aid Hole), Pipe Plug, Pipe Plug; (Use With Ae42758), Pipe Plug; 9.525 mm (3/8"), Pipe Plug; (A) 3/8", Pipe Plug; 3/8", (Use With Ae44867), Pipe Plug; 3/8", Sq. Hd., Pipe Plug; 3/8", (Use With Ae44866), Pipe Plug; (A) (B) (C) 3/8", Sq. Hd., Pipe Plug; (For 4239dn-03 Engine), Pipe Plug; 3/8", Sq.Hd., Pipe Plug; Sq, Pipe Plug; 3/8", Pipe Plug; 3/8" (Sub For 15h623), Pipe Plug; (A)(B)(C) 3/8" Sq Hd, Pipe Plug; 3/8" (Without Starting Aid), Pipe Plug; 3/8" (Gasoline), Pipe Plug; 3/8", (Use With Ae42758), Pipe Plug; 3/8", Pipe Plug; 3/8", (Without Starting Aid), Pipe Plug; 3/8" (Sub For 15h563), Pipe Plug; 3/8", (Starting Aid Hole), Pipe Plug; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 3/8", Pipe Plug; 3/8"-18npt, Pipe Plug; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 3/8", Pipe Plug; 3/8" (Starting Aid Hole), Pipe Plug; 1/8"1
30***47Cap3
34***04Spring Pin; 1/4" X 1-3/8", Spring Pin1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 11 Front Axle : Handbrake, Differential [01b03]
11***13Cotter Pin; (A) 3x20mm, Cotter Pin; 3x2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x18mm (Sub For 34m7010), Cotter Pin; 3x10mm, Cotter Pin; 3x18mm, Cotter Pin; M3 X 20, Cotter Pin; 3,2 X 18 mm, Cotter Pin; 3.200 X 18 mm, Cotter Pin; 3x20mm, Cotter Pin; (A) 3,2x20mm, Cotter Pin, Cotter Pin; 3 2x18mm, Cotter Pin; 3,2x18mm, Cotter Pin; M3,2 X 20, Cotter Pin; 3 X 2 X 20 mm, Cotter Pin; 3,2 X 20 mm, Cotter Pin; 3 X 10 mm2
11***22Cotter Pin; M4 X 30, Cotter Pin; 4x30mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 30 mm |, Cotter Pin; 4x28mm, Cotter Pin; 4 X 30 mm, Cotter Pin; (A) 4x28mm, Cotter Pin; 4 X 28 mm, (Sub For 11h222), Cotter Pin1
1***3Lock Washer, Lock Washer; 1/2"1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 11 Front Axle : Transmission Case-Clutch Shaft-Main Shaft [01a21]
2***3Shaft Key, Shaft Key; 5/16" X 1"1
A***RPin; Up (Sub For R26241 Appl), Pin; Rear (Sub For T26565 Appl), Pin; Od 12.7 mm Up, Rear, Pin; Lower, Pin; Low, Pin; Od=12.7 mm Up, Rear, Pin; Od=12.7 mm (0.5"), Pin; (Sub For T26565), Pin; (Sub For R26241, This Application) (Sub R48685), Pin; Up (Sub For R26241), Pin; (Sub R48685), Pin; Od=12.7 mm, (0.5"), Pin, Pin; (Sub For T26565, This Application), Pin; (Sub For R26241), Pin; (Sub For R26241, This Application) Up, Pin; Od= 12.7 mm, Pin; Up, Pin; Od = 12.7 mm Up, Rear, Pin; Upper, (Sub For R26241, This Application), Pin; Od 12.7 mm (0.5"), Pin; (Sub For T26565 Appl), Pin; Od = 12.7 mm (0.5"), Pin; (Sub For R26241, This Application), Pin; (Sub For R26241 Appl)4
AZ***57Pinion1
See all parts with full part numbers in Heavy Parts AI →
12 Main Clutch, Brake
John Deere : 940 - Combine : 12 Main Clutch, Brake : Brake Valve And Foots Pedals [01b10]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)2
14***42Nut; 3/8"1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 12 Main Clutch, Brake : Clutch Operation [01b06]
11***11Cotter Pin; M3,2 X 15, Cotter Pin; 3x15mm, Cotter Pin, Cotter Pin; 3.200 X 14 mm, Cotter Pin; 3 X 15 mm, Cotter Pin; 3x15, Cotter Pin; 3,2x14mm, Cotter Pin; M3 X 15, Cotter Pin; (A) 3 X 15 mm, Cotter Pin; 3x15 mm1
11***24Pin; 4 X 36 mm 4 X 36 mm, Pin, Pin; 4x40mm, Pin; 4x36mm, Pin; 4 X 36 mm, Pin; 4 X 40 mm, Pin; M4 X 40, Pin; 4x30mm (For Z51894), Pin; 4 X 36mm (For Al56439, Al56440), Pin; 4 X 36 mm (For Al55432, Al55433), Pin; 4 X 36mm (For Al55432, Al55433), Pin; 4x36 Gb/79-2000 Zn D, Pin; (A) 4x36mm, Pin; 4 X 36mm, Pin; 5x50mm2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 12 Main Clutch, Brake : Drive Sheave, Clutch [01b08]
11***02Cotter Pin; 7/32" X 1-3/4"1
1***1Lock Washer; 9.525 mm (3/8"), Lock Washer; 3/8"5
1***3Lock Washer, Lock Washer; 1/2"4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 12 Main Clutch, Brake : Stop Light Switch [01b12]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***31Washer; 4,1 X 7,6 X 0,9 mm, Washer; M4, Washer, Washer; 4mm, Washer; 4.100 mm, Washer; 12mm, Washer; 4 mm, Washer; Ar, 4mm2
14***14Nut; 10mm, Nut; 10 mm, Nut; M8, Nut; (A) 8mm, Nut; 8mm, Nut; (A) M82
See all parts with full part numbers in Heavy Parts AI →
15 Variable Ground Drive
John Deere : 940 - Combine : 15 Variable Ground Drive : Variable Ground Drive [01b14]
11***35Cotter Pin; 6x25mm, Cotter Pin; 6,3x25mm, Cotter Pin; 6 3x25mm, Cotter Pin; 6.300 X 22 mm, Cotter Pin; 6 X 25 mm, Cotter Pin; 5 X 30 mm, Cotter Pin; 6,3 X 25 mm1
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm12
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 15 Variable Ground Drive : Variable Ground Drive [01b16]
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm7
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)2
12***17Lock Washer; 16 M, Lock Washer; 16 mm, Lock Washer; (A) 16mm, Lock Washer; (B) 16mm, Lock Washer; 16mm, Lock Washer; M16, Lock Washer; 16.200 mm, Lock Washer, Lock Washer; Ar, 16 mm, Lock Washer; (A) 16 mm, Lock Washer; Fwd, Lock Washer; 16mm (Sub For 12m1629), Lock Washer; 940, 16 mm1
See all parts with full part numbers in Heavy Parts AI →
20 Fuel Tank
John Deere : 940 - Combine : 20 Fuel Tank : Fuel Shut-Off Valve [01b21]
AZ***83Sediment Bowl; Assembly, Incl Keys 2,4-8, Sediment Bowl; Assembly, Sediment Bowl1
AZ***07Screen; (Sub For Z32028), Screen1
Z3***29Bezel; Incl Key 61
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 20 Fuel Tank : Fuel Tank [01b19]
John Deere : 940 - Combine : 20 Fuel Tank : M E M O R A N D A [01b22]
John Deere : 940 - Combine : 20 Fuel Tank : Throttle And Engine Cut-Off Linkage [01b23]
11***11Cotter Pin; M3,2 X 15, Cotter Pin; 3x15mm, Cotter Pin, Cotter Pin; 3.200 X 14 mm, Cotter Pin; 3 X 15 mm, Cotter Pin; 3x15, Cotter Pin; 3,2x14mm, Cotter Pin; M3 X 15, Cotter Pin; (A) 3 X 15 mm, Cotter Pin; 3x15 mm1
12***06Screw; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) 6 mm, Screw; (A) 6 mm, Screw; 1/4", Screw; M6, (Sub For Ch11474), Screw; (B), Screw; (Sub For J680625) (Also Order 21m7277 And 24m7293), Screw; B6, Screw; (A) (B) 6 mm, Screw; (Sub For J680614) (Also Order 21m7246 And 24m7293), Screw; 6 mm, (3015df106), Washer; (Sub For A590906), Screw; 6 mm Id= 6mm (Sub For 12m7006), Screw; 0.236", Screw; 6 mm Sub For J252106, Screw; (A: 8020w (1000 - 10000)(14680 - )) 6 mm, Screw; 6mm (Sub For 12m1624), Screw; 6 mm M6, Screw; (312) 6mm, Screw; 6 mm (Sub For A590906), Screw; 6 mm (A) (European), Screw; Export/Exportacion/Export, Screw; (A: W/ Straw Chopper) 6 mm, Screw; 6 mm (0.236"), Screw; M16, Screw; (C) 6 mm, Lock Washer; 6 mm (0.236") (Sub For Ffsb107135), Lock Washer; (Sub For Ffsb107924), Lock Washer; 6 mm, (Sub For A590906), Screw; 6,4x18mm, Screw; 6mm, Screw; 6 mm 6 mm, Lock Washer; 6 mm, (Sub For Ffsb107461), Screw; 6 mm (Use With Re507685), Lock Washer; (Sub For A590906), Screw; M6x20, Screw; 6 mm, (Use Without Auxiliary Valve), Screw; 6 mm (Lh And Rh), Lock Washer; 6 mm, (Sub For 04***02), Screw; (Sub For Ch11474), Lock Washer; 6 mm, (Sub For Ffsb107135 And J460616), Lock Washer; 6 mm, (Sub For Ffsb107924), Screw; (A), Screw; 6 mm 6mm, Screw; 6 mm (Sub For 04***02), Screw; 8 mm, Screw; (312), Lock Washer; 6 mm (0.236") (Sub For Ffsb107905), Screw; 6.100 mm, Screw; (A: From Sr.No.5103e-00***54, 5103-01***65, 5103s-01***62, 5203-00***62, 5104/5204-00***01, 5038d-00***01.) 6 mm, Lock Washer; 6 mm (0.236"), Lock Washer; 6 mm (0.236") (Sub For Ffsb107135 And J460616), Screw; 6 mm M6, (2 Used Single) (4 Used Dual), Screw; 6 mm (Sub For 12m7012), Lock Washer, Screw; 6 mm (Use With Re69391), Screw; 6 mm Lh And Rh, Screw; 6 mm, (Australia And New Zealand Units Use 4 Per), Screw; 6 mm (European), Screw; 6,6x12,5mm, Screw; (A: From Sr.No. 5103s-01***62, 5203-00***62, 5104/5204/5038d-00***01.) 6 mm, Lock Washer; (A) 6 mm, (Sub For Ffsb107924), Screw; (A: 8020t (90***00 - 90***00)(90***66 - )), Lock Washer; 6 mm, (Sub For Ffsb107439), Screw; (A: W/O Cab) 6 mm, Lock Washer; 6 mm (0.236") (Sub For Ffsb112244 And J460620), Screw; 6 mm, Screw; 6 mm (Use With R503345 Or Se500364), Screw; 6 mm, (Use With Auxiliary Valve), Screw; 6m, Screw; 6 mm (A), Lock Washer; (Sub For Ffsb107439), Screw; (For Al112964), Lock Washer; (Sub For Ffsb107135), Screw; (A: Rice Version) 6 mm, Lock Washer; 6 mm (0.236") (Sub For Ffsb107924), Screw; (312) M6x20, Lock Washer; 6 mm (0.236") (Sub For Ffsb107439), Screw; M6x16, Screw; 6 mm Sub For A590906, Screw; (B) 6 mm, Screw; (A: Rice/Corn) 6 mm, Screw; M6, Screw; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) 6 mm, Screw; M10, Screw, Screw; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) 6 mm 2130, Lock Washer; 6 mm, (Sub For Ffsb107439 And J252106), Lock Washer; 6 mm, Screw; For X495,X595, Screw; (A) (B)4
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm5
See all parts with full part numbers in Heavy Parts AI →
25 Operator'S Platform
John Deere : 940 - Combine : 25 Operator'S Platform : Indicators [01c08]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm2
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M62
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 25 Operator'S Platform : Operator'S Platform [01c02]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm6
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm10
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 25 Operator'S Platform : Operator'S Seat [01c10]
11***28Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44***59, 5520: Sn -45***00) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-00***13), 5403 (-00***75).), Pin; 5 X 32 mm, (Sub For 11h218)4
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 25 Operator'S Platform : Operator'S Seat [01c12]
11***11Cotter Pin; M3,2 X 15, Cotter Pin; 3x15mm, Cotter Pin, Cotter Pin; 3.200 X 14 mm, Cotter Pin; 3 X 15 mm, Cotter Pin; 3x15, Cotter Pin; 3,2x14mm, Cotter Pin; M3 X 15, Cotter Pin; (A) 3 X 15 mm, Cotter Pin; 3x15 mm1
11***41Cotter Pin; 8 X 60 mm, Cotter Pin; 8x56mm2
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M61
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 25 Operator'S Platform : Steering Column [01c04]
11***11Cotter Pin; M3,2 X 15, Cotter Pin; 3x15mm, Cotter Pin, Cotter Pin; 3.200 X 14 mm, Cotter Pin; 3 X 15 mm, Cotter Pin; 3x15, Cotter Pin; 3,2x14mm, Cotter Pin; M3 X 15, Cotter Pin; (A) 3 X 15 mm, Cotter Pin; 3x15 mm2
11***20Cotter Pin; 4 X 25 mm, Cotter Pin, Cotter Pin; 4 X 22 mm, Cotter Pin; 4 X 25 mm |, Cotter Pin; 4 X 22 mm 4 X 22mm, Cotter Pin; (A) 4x22mm, Cotter Pin; 4 X 22mm, Cotter Pin; 4x22, Cotter Pin; 4x22mm, Cotter Pin; 4x25mm, Cotter Pin; (A) 4 X 22 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; Ar, 4 X 22 mm, Cotter Pin; M4 X 25, Cotter Pin; (A), Cotter Pin; 4 X 20mm1
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 25 Operator'S Platform : Traverse Bracket And Supports [01c06]
12***09Lock Washer; M14, Lock Washer; 14.200 mm, Lock Washer; 14mm, Lock Washer; Ar, 14 mm, Lock Washer; 14 mm, Lock Washer; (A) 14 mm2
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm14
12***39Lock Washer; 20mm, Lock Washer; 20.200 mm, Lock Washer, Lock Washer; 20 mm2
See all parts with full part numbers in Heavy Parts AI →
26 Operating Levers
John Deere : 940 - Combine : 26 Operating Levers : Adjusting Spindle For Variable Sheaves Cylinder [01d05]
11***11Cotter Pin; M3,2 X 15, Cotter Pin; 3x15mm, Cotter Pin, Cotter Pin; 3.200 X 14 mm, Cotter Pin; 3 X 15 mm, Cotter Pin; 3x15, Cotter Pin; 3,2x14mm, Cotter Pin; M3 X 15, Cotter Pin; (A) 3 X 15 mm, Cotter Pin; 3x15 mm3
11***20Cotter Pin; 4 X 25 mm, Cotter Pin, Cotter Pin; 4 X 22 mm, Cotter Pin; 4 X 25 mm |, Cotter Pin; 4 X 22 mm 4 X 22mm, Cotter Pin; (A) 4x22mm, Cotter Pin; 4 X 22mm, Cotter Pin; 4x22, Cotter Pin; 4x22mm, Cotter Pin; 4x25mm, Cotter Pin; (A) 4 X 22 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; Ar, 4 X 22 mm, Cotter Pin; M4 X 25, Cotter Pin; (A), Cotter Pin; 4 X 20mm3
11***29Cotter Pin; 5 X 36m M, Cotter Pin; (A) 50 X 40 mm, Cotter Pin; 5 X 36 mm, Cotter Pin, Cotter Pin; 5x36mm, Cotter Pin; 5 X 40 mm, Cotter Pin; 50 X 40 mm, Cotter Pin; 5x40mm, Cotter Pin; 5x32mm, Cotter Pin; 5x32mm (Sub For 11m1404), Cotter Pin; 5x361
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 26 Operating Levers : Concave And Hand Brake Lever [01c22]
11***11Cotter Pin; M3,2 X 15, Cotter Pin; 3x15mm, Cotter Pin, Cotter Pin; 3.200 X 14 mm, Cotter Pin; 3 X 15 mm, Cotter Pin; 3x15, Cotter Pin; 3,2x14mm, Cotter Pin; M3 X 15, Cotter Pin; (A) 3 X 15 mm, Cotter Pin; 3x15 mm1
11***14Cotter Pin; 3,2 X 22mm, Cotter Pin, Cotter Pin; 3x25mm, Cotter Pin; (A) 3,2x22mm, Cotter Pin; 3,2x22mm, Cotter Pin; 3.200 X 22mm, Cotter Pin; 3,2 X 22 mm, Cotter Pin; 3.200 X 22 mm, Cotter Pin; 3x22mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; 3 2x22mm, Cotter Pin; 3 X 25 mm, Cotter Pin; M3 X 25, Cotter Pin; 3,2x25mm2
11***19Cotter Pin; 4x18mm (Sub For 11m7013), Cotter Pin, Cotter Pin; 4x20mm, Cotter Pin; 4x18 mm, Cotter Pin; 4 X 18 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; 4x18mm (Sub For 11h216), Cotter Pin; 4x18mm, Cotter Pin; 4 X 18mm, Cotter Pin; 4x18mm (Sub For 11h216, 11m7013), Cotter Pin; 4 X 8mm, Cotter Pin; (A) 4x18mm3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 26 Operating Levers : Control Lever Housing, Left-Hand And Rear-View Mirror [01c16]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm0
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)2
14***29Nut; M8, Nut; (A) 8mm, Nut; 950, M8, Nut; M8, 6,6x12,5x1,6, Nut; (A) M8 (Sub For 14m7137), Nut; (A: Area Counter Support, R.H. Side) M8, Nut; M8 Includes Dq11813 And Dq12055, Nut; M6, Nut; (A) ,M8, Nut; M8 M8x16, Nut; (A) M8, Nut; M8, 8, Nut; (C) M8, Nut; X M8, Nut; X M8, Nut; M8, (312), Nut; M8 (Sub For Sb12293201/0), Nut; Ar, M8, Nut; (A: Rice/Corn) M8, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8, Nut; 8mm, Nut; 960, M8, Nut; M8 (Sub For 14m7137), Nut; M8 (Sub For 14m6825), Nut; 970, M8, Nut; (B), Nut; M8 Use With Az17518, Nut; Lh, M8, Nut; M8, M, Nut; M8 (For Al63397), Nut; M8, M8, Nut; M8 (Sub For 14m7137, 14m7140), Nut; M8, Use W/ Az17516 - Az17518, Nut; M8, (Use With Az17518), Nut; M9, Nut; (B) M8, Nut; 5/16" 8mm, Nut; 930, M8, Nut; (B: Without Lateral Tilt) M8, Nut; M8 |, Nut; M8, M12x35, Nut; (A: Rice Version) M8, Nut; M10, Nut; M8, M8, 8mm, Nut; Ar, Lh, M8, Nut; 8x1,25mm, Nut; M8, (10.9), Nut; 8 mm, Nut; Ar M8, Nut; M8 X 20, Nut; 940, M8, Nut; M8, 940w/ 343, Nut; 8mm (Sub For 14m7137), Nut; M8, 8x7mm, Nut; M8, (312) M8, Nut; (A: For Usa Only) M8, Nut; M8, 8mm, Nut; M8 M8, Nut, Nut; M8, (312) M10, Nut; (A) (B) M8, Nut; (A: Discharge Spout (High Arc)) M8, Nut; Ar L.H. M8, Nut; M8, (B), Nut; (B: For Usa Only) M82
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 26 Operating Levers : Control Lever Housing, Right-Hand [01c20]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm3
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M61
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 26 Operating Levers : Control Levers [01d01]
11***06Cotter Pin; 1,600 X 14 mm, Cotter Pin; 1,5x15mm, Cotter Pin; 1,5 X 15 mm, Cotter Pin; 1.600 X 14 mm, Cotter Pin; (E), Cotter Pin, Cotter Pin; (C), Cotter Pin; (C) 1,6 X 14 mm, Cotter Pin; 1,6 X 14 mm2
11***14Cotter Pin; 3,2 X 22mm, Cotter Pin, Cotter Pin; 3x25mm, Cotter Pin; (A) 3,2x22mm, Cotter Pin; 3,2x22mm, Cotter Pin; 3.200 X 22mm, Cotter Pin; 3,2 X 22 mm, Cotter Pin; 3.200 X 22 mm, Cotter Pin; 3x22mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; 3 2x22mm, Cotter Pin; 3 X 25 mm, Cotter Pin; M3 X 25, Cotter Pin; 3,2x25mm1
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 26 Operating Levers : Gear Shifting Parts [01d03]
11***11Cotter Pin; M3,2 X 15, Cotter Pin; 3x15mm, Cotter Pin, Cotter Pin; 3.200 X 14 mm, Cotter Pin; 3 X 15 mm, Cotter Pin; 3x15, Cotter Pin; 3,2x14mm, Cotter Pin; M3 X 15, Cotter Pin; (A) 3 X 15 mm, Cotter Pin; 3x15 mm4
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm2
14***40Nut; M10 |, Nut; M8 (Sub For 14m7137), Nut; M16, Nut; 10mm, Nut; (Sub For 14m7039), Nut; M8, Nut; 10mm (Sub For 14m7039), Nut; M10, (312) M10, Nut; 10 mm, Nut; M10, 3,2x20mm, Nut; (C) M10, Nut; Ar, 10mm, Nut; M10, (312), Nut; (A: For Rice) M10, Nut; M10, Nut; (B) 8 mm, Nut; Ar, M10, Nut; M10 (Ord W/Sb12585100/0), Nut; M10, M10x25, Nut; 12mm, Nut; (D: Components Of Item Dq73362) M10, Nut; M10 (Sub For 14m7273), Nut; M10 Lh, Nut; (A: Rice Version) M10, Nut; (A: W/ Lateral Tilt) M10, Nut, Nut; (A) M8, Nut; M10, M10, Nut; M10, M12x30, Nut; M10, 11x21x2mm, Nut; M10 (Sub For 14m7039), Nut; (A: Rice) M10, Nut; (A) 10mm, Nut; (A) M10, Nut; M10x50, Nut; M10 M10, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10, Nut; 10x1,5mm, Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M10, Nut; (A: No Longer Required) M10, Nut; (B) M104
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 26 Operating Levers : Left-Hand Shift Lever [01c18]
11***14Cotter Pin; 3,2 X 22mm, Cotter Pin, Cotter Pin; 3x25mm, Cotter Pin; (A) 3,2x22mm, Cotter Pin; 3,2x22mm, Cotter Pin; 3.200 X 22mm, Cotter Pin; 3,2 X 22 mm, Cotter Pin; 3.200 X 22 mm, Cotter Pin; 3x22mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; 3 2x22mm, Cotter Pin; 3 X 25 mm, Cotter Pin; M3 X 25, Cotter Pin; 3,2x25mm4
11***22Cotter Pin; M4 X 30, Cotter Pin; 4x30mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 30 mm |, Cotter Pin; 4x28mm, Cotter Pin; 4 X 30 mm, Cotter Pin; (A) 4x28mm, Cotter Pin; 4 X 28 mm, (Sub For 11h222), Cotter Pin1
11***38Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 26 Operating Levers : M E M O R A N D A [01d02]
John Deere : 940 - Combine : 26 Operating Levers : Operating Controls,Right-Hand [01c24]
11***06Cotter Pin; 1,600 X 14 mm, Cotter Pin; 1,5x15mm, Cotter Pin; 1,5 X 15 mm, Cotter Pin; 1.600 X 14 mm, Cotter Pin; (E), Cotter Pin, Cotter Pin; (C), Cotter Pin; (C) 1,6 X 14 mm, Cotter Pin; 1,6 X 14 mm3
11***08Cotter Pin; 2x14mm, A=26,5mm, Cotter Pin; 2 X 14 mm, Cotter Pin; 2 X 15 mm, Cotter Pin; 8mm, Cotter Pin; 2x14mm, Cotter Pin; 2x15mm, Cotter Pin, Cotter Pin; 2 X 15mm, Cotter Pin; 2 X 14mm, Cotter Pin; (G: (Xxxxxx- ) 7200-00***60; 7400-00***14) (I: (Xxxxxx- ) 7200-00***87; 7400-00***32) 2 X 14 mm, Cotter Pin; 2 X 14 mm M2 X 30, Cotter Pin; (F: ( -Xxxxxx) 7200-00***81; 7400-00***26) 2 X 14 mm1
11***14Cotter Pin; 3,2 X 22mm, Cotter Pin, Cotter Pin; 3x25mm, Cotter Pin; (A) 3,2x22mm, Cotter Pin; 3,2x22mm, Cotter Pin; 3.200 X 22mm, Cotter Pin; 3,2 X 22 mm, Cotter Pin; 3.200 X 22 mm, Cotter Pin; 3x22mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; 3 2x22mm, Cotter Pin; 3 X 25 mm, Cotter Pin; M3 X 25, Cotter Pin; 3,2x25mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 26 Operating Levers : Sun Roof [01d07]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x208
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm14
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M64
See all parts with full part numbers in Heavy Parts AI →
27 Electrical System
John Deere : 940 - Combine : 27 Electrical System : Battery [01d22]
AZ***17Cable1
AZ***75Battery Cable1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 27 Electrical System : Cable Clips;Connectors And Plugs [01e01]
57***33Elec. Connector Acce; (A) -/6.3mm, Elec. Connector Acce; (C) -/6.3mm, Elec. Connector Acce; (A) -/6,3mm |, Elec. Connector Acce, Elec. Connector Acce; (Sub For Z28350), Elec. Connector Acce; (A: Wire Gauge / Connector Width) / 6.3mm, Elec. Connector Acce; (A) Packg 25, Elec. Connector Acce; (Ord W/ 57m7045), Elec. Connector Acce; (A: Wire Gauge / Connector Width) /6.3mm, Elec. Connector Acce; (A) (B) (C) -/6.3mm, Elec. Connector Acce; (A: Wire Gauge / Connector Width) 6.3mm, Elec. Connector Acce; (A) - /6.3mm, Elec. Connector Acce; Packg 25, Elec. Connector Acce; (A: Wire Gauge / Connector Width) /6, 3mm, Elec. Connector Acce; (C) -/6,3mm, Elec. Connector Acce; (A) /6,3mm, Elec. Connector Acce; (A: Wire Gauge/Connector Width) /6.3mm, Elec. Connector Acce; (A) - /6,3mm, Elec. Connector Acce; (A) (B) (C) -/6,3mm, Elec. Connector Acce; (Packg 25), Elec. Connector Acce; (Packg 20), Elec. Connector Acce; (A) - /6,3mm, Elec. Connector Acce; (A) -/6,3mm0
57***38Elec. Connector Term; (A) -1,5mm2/8mm Packg 25, Elec. Connector Term; (A: Wire Gauge/Connector Width) -1.5 mm² /8.0 mm, Elec. Connector Term; (A: Wire Gauge/Connector Width) -1.5mm² /8, 0mm, Elec. Connector Term; (A) 0.5-1.5mm2/8.0mm, Elec. Connector Term; (A) -1,5mm2/8,0mm Packg25, Elec. Connector Term; (A: Cable Gauge Plug Width) 0.5-1.5mm² /8.0mm, Elec. Connector Term; (A: Wire Gauge / Connector Width) -1.5mm²/8.0mm, Elec. Connector Term; (A) (B) (C) -1,5mm2/8,0mm, Elec. Connector Term; (A) -1.5mm2/8.0mm, Elec. Connector Term; (A) -1,5mm2/8mm, Packg 25, Elec. Connector Term; (A) 0,5-1,5mm2 /8,0mm, Elec. Connector Term; (A: Wire Gauge / Connector Width) 0.5-1.5mm² /8mm, Elec. Connector Term; (A) (C) -1.5mm2/8.0mm, Elec. Connector Term; (A: Wire Gauge/Connector Width) -1.5mm2 /8.0mm, Elec. Connector Term; (A: Wire Gauge/Connector Width) -1.5mm² /6.3mm, Elec. Connector Term; (A: Wire Gauge / Connector Width) 0.5-1.5 Mm2 /8 mm, Elec. Connector Term; (A: Wire Gauge / Connector Width) 0.5 -1.5mm² /8.0mm, Elec. Connector Term, Elec. Connector Term; (A: Wire Gauge/Connector Width) -1.5mm² /8.0mm, Elec. Connector Term; (A) (B) (C) -1.5mm2/8.0mm, Elec. Connector Term; (A: Wire Gauge / Connector Width) 0.5-1.5mm² /8.0mm, Elec. Connector Term; (A: Wire Gauge / Connector Width) -1.5mm2/8.0mm, Elec. Connector Term; (A: Wire Gauge/Connector Width) -1, 5mm2 /8, 0mm, Elec. Connector Term; (A: Wire Gauge/Connector Width) -1.5mm2/8.0mm, Elec. Connector Term; (A) (C) -1,5mm2/8,0mm, Elec. Connector Term; (A) -1,5mm2/8mm,Packg 25 |, Elec. Connector Term; (A: Wire Gauge / Connector Width) 0.5-1.5 mm² /8.0 mm, Elec. Connector Term; (A) (B) (C) -1,5mm,2/8,0mm, Elec. Connector Term; (A) -1,5mm2/8mm,Packg 25, Elec. Connector Term; (A) -1,5mm2/8,0mm0
57***39Tab; (A: Cable Gauge Plug Width) 1-2.5 mm²/6.3 mm, Tab; (A) 2.5mm2/6.3mm, Tab; (A: Cable Gauge Plug Width) 1-2, 5mm2/6, 3mm, Tab; Right Shoe, Tab; (Sub For Z29299), Tab; (A: Wire Gauge/Connector Width) 1-2.5mm² /6.3mm, Tab; (A: Wire Gauge / Connector Width) 1-2.5mm²/6.3mm, Tab; (A: Wire Gauge/Connector Width) -2.5mm² /6.3mm, Tab; (A: Wire Gauge/Connector Width) -2.5mm² /6, 3mm, Tab; (A) 0,8-2,5 Mm2, Packg 25, Tab; (A: Wire Gauge/Connector Width) -2.5mm²/6. 3mm, Tab; (A) (B) (C) -2,5mm,2/6,3mm, Tab, Tab; (A: Cable Gauge Plug Width) -1, 0mm 2/6, 3 mm, Tab; (A) 0,8-2,5mm2, Packg 25, Tab; (A) (B) (C) -2,5mm2/6,3mm, Tab; (A: Wire Gauge/Connector Width) -2.5 mm² /6.3 mm, Tab; (A) 0.8-2.5mm2/6.3mm, Tab; (A: Wire Gauge/Connector Width) -2.5mm2 /6.3mm, Tab; (A: Cable Gauge Plug Width) 1-2.5mm2/6.3mm, Tab; (A: Wire Gauge/Connector Width) -2, 5mm2/6, 3mm, Tab; (A) -2,5mm2/6,3mm Packg 25, Tab; (A: Cable Guage Plug Width) -1, 0mm 2/6, 3 mm, Tab; (A: Wire Gauge/Connector Width) 1-2.5mm²/6.3mm, Tab; (A) 0,8-2,5 Mm2,Packg 25, Tab; Left Shoe, Tab; (A) -2,5mm2/6,3mm Packg25 |, Tab; (A: Cable Gauge Plug Width) 1-2.5mm² / 6.3mm, Tab; (A: Cable Gauge Plug Width) 1-2.5mm²/6.3mm, Tab; (A) -2.5mm2/6.3mm, Tab; (A) 0.8-2.5 Mm2, Tab; (A) -2,5mm2/6,3mm Packg25, Tab; (A) 0,8-2,5 Mm2.Packg 25, Tab; (A: Wire Gauge / Connector Width) 1-2.5mm² /6.3mm, Tab; (A: Wire Gauge/Connector Width) -2.5mm2/6.3mm, Tab; (A) -2,5mm2/6,3mm, Tab; 1-2, 5mm2 /6, 3mm, Tab; (A: Wire Gauge/Connector Width) -2.5mm²/6.3mm, Tab; (A) (B) (C) -2.5mm2/6.3mm, Tab; (A: Cable Gauge Plug Width) 1-2.5mm 2 /6.3mm0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 27 Electrical System : Dashbobard Panel [01d14]
12***11Lock Washer; 5,1mm, Lock Washer; 5mm (Sub For 12m3998), Lock Washer; 5mm, Lock Washer; 5 mm M5, Lock Washer; 5mm (Sub For 12h246), Lock Washer; 5 mm (Order 12m7064), Lock Washer; 6mm, Lock Washer; 5,5mm, Lock Washer; (A) 5 mm, Lock Washer; 0.197", Lock Washer; Ar, 5mm, Lock Washer; 5 mm (Sub 12m7064), Lock Washer; M5, Lock Washer; 5 X 9,2 X 1,2 mm, Lock Washer; 5 mm, (Sub 12m7064), Lock Washer; 5,100mm, Lock Washer; (A: For Austria Only) 5 mm, Lock Washer; 5 mm, Lock Washer, Lock Washer; 5 mm A5, Lock Washer; 5 mm, (Use With Re19187), Lock Washer; (A) M5, Lock Washer; 5mm (Sub For L29166), Lock Washer; M10, Lock Washer; 2-916-680-004, Lock Washer; 5 1mm, Lock Washer; (A) 5mm5
14***28Nut; (B) M5, Nut; M5, (312) M5, Nut; M5 (Sub For Al69700), Nut; (A: For Austria Only) M5, Nut; M5, Nut; Ar, 5mm, Nut; 5 mm (Sub For 14h778), Nut; M5 (Sub For 14h778), Nut; (A) M5, Nut; M5 (Sub For 14m3241), Nut; 5 mm, Nut; (B) 5mm, Nut; (C) 5mm, Nut; M5 Lh, Rh, Nut, Nut; 5mm, Nut; (A) 5mm (Sub For 14h631), Nut; Ar, M5, Nut; M5 |, Nut; M5, M5, Nut; (C) M5, Nut; M5 M5, Nut; 5mm (Sub For 14m7021), Nut; (A) 5mm, Nut; 5x0,8mm, Nut; M5 (Sub For L48704)5
21***40Screw; M5 X 10, Screw, Screw; M8x18, Screw; M5 X10, Screw; 5x10mm, Screw; M5x101
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 27 Electrical System : Electric Equipment [01d10]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm1
14***29Nut; M8, Nut; (A) 8mm, Nut; 950, M8, Nut; M8, 6,6x12,5x1,6, Nut; (A) M8 (Sub For 14m7137), Nut; (A: Area Counter Support, R.H. Side) M8, Nut; M8 Includes Dq11813 And Dq12055, Nut; M6, Nut; (A) ,M8, Nut; M8 M8x16, Nut; (A) M8, Nut; M8, 8, Nut; (C) M8, Nut; X M8, Nut; X M8, Nut; M8, (312), Nut; M8 (Sub For Sb12293201/0), Nut; Ar, M8, Nut; (A: Rice/Corn) M8, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8, Nut; 8mm, Nut; 960, M8, Nut; M8 (Sub For 14m7137), Nut; M8 (Sub For 14m6825), Nut; 970, M8, Nut; (B), Nut; M8 Use With Az17518, Nut; Lh, M8, Nut; M8, M, Nut; M8 (For Al63397), Nut; M8, M8, Nut; M8 (Sub For 14m7137, 14m7140), Nut; M8, Use W/ Az17516 - Az17518, Nut; M8, (Use With Az17518), Nut; M9, Nut; (B) M8, Nut; 5/16" 8mm, Nut; 930, M8, Nut; (B: Without Lateral Tilt) M8, Nut; M8 |, Nut; M8, M12x35, Nut; (A: Rice Version) M8, Nut; M10, Nut; M8, M8, 8mm, Nut; Ar, Lh, M8, Nut; 8x1,25mm, Nut; M8, (10.9), Nut; 8 mm, Nut; Ar M8, Nut; M8 X 20, Nut; 940, M8, Nut; M8, 940w/ 343, Nut; 8mm (Sub For 14m7137), Nut; M8, 8x7mm, Nut; M8, (312) M8, Nut; (A: For Usa Only) M8, Nut; M8, 8mm, Nut; M8 M8, Nut, Nut; M8, (312) M10, Nut; (A) (B) M8, Nut; (A: Discharge Spout (High Arc)) M8, Nut; Ar L.H. M8, Nut; M8, (B), Nut; (B: For Usa Only) M81
19***88Screw; M8 X 30 Sub For J900830, Screw; (A: For Fork-Type Pickup) M8 X 30, Screw; M8 X 30 (Sub For (4) 19m7298) (Sub For (4) M805570), Screw; (B: With Hydraulic Cab Suspension (Hcs)) M8 X 30, Screw; M8 X 30 (Use With Ae53101, At185951 And Ah165975), Screw; M8 X 30 (Sub For Er144176 Appl), Screw; M8 X 30, Code 3111 And 3114, Screw; M8 X 30, M8x30, Screw; (A: For Usa Only) M8 X 30, Screw; Ar, M8 X 30, Screw; M8 X 30 (Low Height Position), Screw; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M8 X 30, Cap Screw; M8 X 30, (Sub For Ffsb107866), Screw; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 30, Screw; (A: Discharge Spout (High Arc)) M8 X 30, Screw; M8 X 30, (Pedimos 19m7513), Screw; (A) 8x30mm, Screw; M8 X 30 M8x30, Screw; M8 X 30 (Sub For 19m7298), Screw; M8 X 30 (Sub For 19m7153), Screw; (A: With Suspended Cab) M8 X 30, Screw; (E: For Liquid Fertilizer Spout) M8 X 30 12-Row, 36-And 38-Inch; 16-Row, 30-Inch, Screw; (B: Medium Seat Position) M8 X 30, Screw; M8 X 30 (Hs=10.9), Screw; (A: With Ivt-Transmission) M8 X 30, Screw; M8 X 30 (Sub For R121042), Screw; M8x30, Screw; M8 X 30 (Sub For M805570), Screw; M8 X 30 (Use With Ae53101, At185951, Ah165975), Screw; 8x30mm, Screw; M8 X 30 (Use With Am879698) (Sub For Ch12025), Screw; M8 X 30 (For Al80755), Screw; M8 X 30, (312) M8 X 30, Screw; M8 X 30 Clutch Pedal Adjustment Stop, Screw; (A) M8 X 30, Screw; (C: With Hydraulic Cab Suspension (Hcs)) M8 X 30 M8 X 30, Screw; M8 X 30, M8 X 30, Screw; (C: With Hydraulic Cab Suspension (Hcs)) M8 X 30, Screw; M8, Screw; M8 X 30, Screw; M8 X 30 mm, Screw; (B) M8 X 30, Screw; (C) M8 X 30, Screw, Screw; (A) M8x30, Screw; (Use With Ae53101, At185951 And Ah165975), Screw; M8 X 30, (Sub For (2) Mg508079), Screw; M8 X 30 For Liquid Fertilizer Spout, Screw; 8 X 30 mm, Screw; M8 X 30 (Sub For (4) M805570), Screw; M8 X 30 Sub For J010830, Screw; M8 X 30 (Hs=8.8), Screw; M8 X 30 (Sub For J900830)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 27 Electrical System : Electric Equipment [01d12]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm6
19***59Cap Screw; M6 X 16, Cap Screw; (A) M6x16, Cap Screw; M6 X 15, Cap Screw; 6x15mm, Cap Screw; M6x16, Cap Screw; (A) M6 X 16, Cap Screw; 6 X 15 mm, Cap Screw; M10 X 20, Cap Screw; (B) M6x16, Cap Screw; 6x16mm, Cap Screw; M6x15, Cap Screw; (A) 6x16mm, Cap Screw; M8x16, Cap Screw; Ar, M6 X 16, Cap Screw; M6, Cap Screw; M8x156
AZ***09Cable1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 27 Electrical System : Headlights And Clearance Lights [01d18]
John Deere : 940 - Combine : 27 Electrical System : M E M O R A N D A [01d13]
John Deere : 940 - Combine : 27 Electrical System : Operating Light [01d24]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm3
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M63
14***67Lock Nut; 940, M10, Lock Nut; M10, (Sub For 14m7337, This Application), Lock Nut; (I: Components Of Item Dq73362) M10, Lock Nut; (F: Up To Series 2122 ( -06***12), 2126 ( -07***05)) M10 2122, 2126, Lock Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M10, Lock Nut; M10 (Sub For 14m7140), Lock Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M10, Lock Nut; 10mm (Sub For 43m7004), Lock Nut; (A) 10mm, Lock Nut, Lock Nut; (A: Sekura Cab - 3 Cylinder Tractors) M10, Lock Nut; M10 Din985 (8.0), Lock Nut; M10 Nsep (Ord Dc50564), Lock Nut; (Sub For M85516), Lock Nut; M10 M10, Lock Nut; M10 Locking, (Rear Center), Lock Nut; X M10, Lock Nut; M10 Standard Dipperstick, Lock Nut; M10x1,5, Lock Nut; M8, Lock Nut; M10 (Sub For 11m7012) (Appl), Lock Nut; M10, Lock Nut; M10x1.5, Lock Nut; (A: Model 9660 For North America Only) M10, Lock Nut; M10 (Sub For Es10679), Lock Nut; M10 (With Standard Lighting), Lock Nut; M10 Lh, Rh, Lock Nut; Ar, Lock Nut; (B: For Japan Only) M10, Lock Nut; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M10, Lock Nut; M10, Plate To Frame, Lock Nut; (A) (B) M10, Lock Nut; (A: Without Exhaust Gas Recirculation) M10, Lock Nut; (E: Up To Series 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) (F: Up To Series 2122 ( -06***12), 2126 ( -07***05)) M10, Lock Nut; 10mm, Lock Nut; (A: 2126, 24 Rows) M10, Lock Nut; (A: Used In 5615 Hc Too) M10, Lock Nut; 10 mm, Lock Nut; M10, (312) M10, Lock Nut; M10 X 1,5, Lock Nut; M10, (Sub For M85516), Lock Nut; (A: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- )) (B: Starting From Series Number 2115 (07***01- ), 2117 (07***01- )) M10 2130, Lock Nut; (A: Starting From Series Number 2113 (07***01- ), 2115 (07***01- ), 2117 (07***01- )) (B: Starting From Series Number 2122 (07***01- ), 2126 (07***06- )) M10 2130, Lock Nut; (C: Starting From Series Number 2109(07***01- ), 2111(07***01- ), 2113(07***01- ), 2115(07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M10, Lock Nut; (C: For Electronic Wrapping Control Plus) M10, Lock Nut; (A: Option) M10, Lock Nut; M10 Rh, Lh, Lock Nut; (A) M10, Lock Nut; M10 Nla, Lock Nut; M10 With Standard Lighting, Lock Nut; M10, (312), Lock Nut; M10, Lock Nut; (D: Components Of Item Dq73362) M10, Lock Nut; M10 (Sub For A51212, 21m7423 Appl), Lock Nut; M10, 14x24mm, Lock Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) M10, Lock Nut; M10 With Additional Lighting, Lock Nut; M10 (With Additional Lighting), Lock Nut; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 2130, Lock Nut; M10, M10, Lock Nut; M10 Rh, Lock Nut; M10 (Sub For 14m7334 Appl), Lock Nut; M10, A, Lock Nut; (C: Starting From Series Number 2109(07***01- ), 2111(07***01- ), 2113(07***01- ), 2115(07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M10 2130, Lock Nut; (A) 10mm (Sub For 43m7001), Lock Nut; (A), Lock Nut; M10, M8, Lock Nut; (B) M10, Lock Nut; M10, ( Ffsb110984 No Longer Available), Lock Nut; M10 (For Cc44658), Lock Nut; M10 (Sub For A51212 Appl), Lock Nut; M10 X 1.5, Lock Nut; M10 (Sub For Sb12585100/0, 14m7140), Lock Nut; (A: For 3.7 M (12') And 4.6 M (15') Sizes) M10, Lock Nut; M10, (B)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 27 Electrical System : Parts For Electrical Equipment [01d16]
AZ***35Horn1
AZ***70Wiring Lead; (A), Wiring Lead1
AZ***71Cable; (A), Cable1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 27 Electrical System : Turn Signal And Tail Lights [01d20]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm8
12***11Lock Washer; 5,1mm, Lock Washer; 5mm (Sub For 12m3998), Lock Washer; 5mm, Lock Washer; 5 mm M5, Lock Washer; 5mm (Sub For 12h246), Lock Washer; 5 mm (Order 12m7064), Lock Washer; 6mm, Lock Washer; 5,5mm, Lock Washer; (A) 5 mm, Lock Washer; 0.197", Lock Washer; Ar, 5mm, Lock Washer; 5 mm (Sub 12m7064), Lock Washer; M5, Lock Washer; 5 X 9,2 X 1,2 mm, Lock Washer; 5 mm, (Sub 12m7064), Lock Washer; 5,100mm, Lock Washer; (A: For Austria Only) 5 mm, Lock Washer; 5 mm, Lock Washer, Lock Washer; 5 mm A5, Lock Washer; 5 mm, (Use With Re19187), Lock Washer; (A) M5, Lock Washer; 5mm (Sub For L29166), Lock Washer; M10, Lock Washer; 2-916-680-004, Lock Washer; 5 1mm, Lock Washer; (A) 5mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 27 Electrical System : Warning Emblem For France Only [01d23]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm2
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M62
19***77Screw; (C) M6 X 20 (Sub For 19m7862), Screw; M6 X 20 Sub For J020620, Screw, Screw; M6 X 20, (312), Screw; (B: (Xxxxxx-) 8560-00***04; 8760-00***52; 8960-00***15) M6 X 20, Screw; M6 X 20 M6x20, Cap Screw; M6 X 20, Cap Screw; (Sub For J020620), Screw; M6 X 20 (C), Screw; M6 X 20 (A), Screw; (A) M6x20, Screw; (A: From Sr.No. 5103s-01***62, 5203-00***62, 5104/5204/5038d-00***01.) M6 X 20, Screw; (C: United Kingdom, France, Germany And Sweden) M6 X 20, Screw; 6 X 20 mm, Screw; (B) M6 X 20, Screw; (Sub For J020620), Screw; M6 X 20 (Sub For 19m7862), Screw; M6 X 20 (A) (B), Screw; M6 X 20 (Sub For J090620), Screw; (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)) M6 X 20, Screw; M6 X 20, M6x20, Screw; 6x20mm, Cap Screw; M6 X 20, (Sub For Ffsb107149, Along With 24m7047 And 12m7067), Screw; (B: With Cab) M6 X 20, Screw; M6 X 20 (Sub For J020620), Screw; M6 X 20 Upper Left Hole, Screw; (A), Screw; M6 X 20 Sub For J900650, Screw; (A: With Air Trailer Brake System) M6 X 20, Screw; M6 X 20, Screw; M6 X 20 R.H. (Use With E131650), Screw; (A: Syncshuttle Transmission) (B: Collarshift Transmission) M6 X 20, Screw; (A: Syncshuttle Transmission) (B: Collarshift Transmission) M6 X 20, Screw; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M6 X 20, Screw; (A) M6 X 20, M6x20, Screw; M6 X 20 (Sub For J260620) (Also Order 24m7054), Screw; M6 X 20 9 X 19 X 1.5, Screw; M6 X 20 (Pst), Screw; M6 X 20 (Sub For 21m7285 Appl), Screw; (A: For Vineyard Tractor Version Only) M6 X 20, Screw; M6 X 20, 6mm, Screw; M6 X 20 (Use With T118880 And T118881), Screw; M6 X 20 Length), Screw; (A: (-Xxxxxx) 8560-00***90; 8760-00***99; 8960-00***96) M6 X 20, Screw; M6 X 20 (10.9), Screw; (A: W/ Straw Chopper) M6 X 20, Screw; M6x20, Screw; M6 X 20 Sub For J090620, Screw; M6 X 20, (Sub For T76066), Screw; M6 X 20 (650 Buck Auto Ex), Screw; M6 X 20, (4019df, Tf), Screw; (A: With Power Reverser) M6 X 20, Screw; M6 X 20, 1450/1550, Screw; M6 X 20, Ar, Cap Screw; M6 X 20, (Sub For J900620), Screw; (A: Used In High Clearance Tractors Too) M6 X 20, Screw; M6 X 20, (3011df, 3014df), Screw; (A) M6 X 20, Screw; Ar, M6x20, Screw; (A: Rice/Corn) M6 X 20, Screw; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M6 X 20, Screw; M6 X 20 9 mm X 19 mm X 1.5 mm, Cap Screw, Screw; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) M6 X 20, Screw; M6 X 20, (Code 1602), Screw; M6 X 20 Sub For J900620, Screw; M6 X 20 (Sub For 19m7077), Screw; M6 X 20 (A), (B), Screw; (A) (B) M6 X 20, Screw; M6 X20, Cap Screw; M6 X 20, (Sub For Ffsb107718), Screw; M6 X 20, M6 X 20, Screw; (A: From Sr.No.5103e-00***54, 5103-01***65, 5103s-01***62, 5203-00***62, 5104/5204-00***01, 5038d-00***01.) M6 X 20, Screw; M6 X 20 (Sub For 19m7560), Screw; M6 X 20 M6x20 (Sub For 21m7285 Appl), Screw; M6 X 20, (Use With Auxiliary Valve), Screw; (A: Export Version (4x2 Sn 00***00-) (6x4 Sn 01***46-)) M6 X 20, Screw; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M6 X 20, Screw; (A: Use With Al160390) M6 X 20, Screw; M6 X 20 (Sub For (1) J900620)(J260620 Nla), Screw; M6 X 20 (Sub For J900620), Screw; M6 X 20 (2 Used With Endgate, 3 Used Without Endgate), Screw; (A: United Kingdom, France, Germany And Sweden) M6 X 20, Screw; (B) M6x202
See all parts with full part numbers in Heavy Parts AI →
35 Main Hydraulic
John Deere : 940 - Combine : 35 Main Hydraulic : 3 Spool Control Valve [01e12]
3***4Snap Ring3
AH***30Pressure Relief Valv; Incl Keys 14,18,19, Pressure Relief Valv1
AH***88Plug, Plug; Filter, Plug; With Filter, Plug; Cap, Filter3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : 3 Spool Control Valve [01e14]
AH***23Poppet; (Kit Ah78792), Poppet; Kit, (Ord Az24156) |, Poppet; (Kit Az24156), Poppet; (For Az24477), Poppet; (A), Poppet; (Kit Ah127847), Poppet; (Kit An192650), Poppet; Kit An110780, Poppet; Kit Az24156, Poppet; (Kit Ah78794), Poppet, Poppet; (Kit Ah108721), Poppet; (A) (Sub For An30940, This Application), Poppet; Kit (Ord Az24156), Poppet; (Kit Ah127848), Poppet; (Kit An153037), Poppet; (Kit Ah127846), Poppet; Kit An192650, Poppet; (K), Poppet; (Kit Ah127845), Poppet; (A) (Sub An30940), Poppet; (Kit Ah127843)1
AN***40Poppet; (Kit An152240), Poppet, Poppet; (Ord Keys 17,18,22,23 Appl), Poppet; (A) (Sub For Ah80223, This Application), Poppet; (Ord Keys 17,18,21,22 Appl), Poppet; (A), Poppet; (For Az19373), Poppet; (Ord Keys 17,18,20,21 Appl), Poppet; (Kit Ah101489 And Ah108721), Poppet; (Kit Ah78794), Poppet; (Kit Ah78792), Poppet; (A) (Double Acting Cylinder), Poppet; (Kit Ah108721), Poppet; (K)2
AZ***96Valve Seat Insert; Incl Key 2, Valve Seat Insert; Inc Key 2, Valve Seat Insert; Incl Key 21, Valve Seat Insert, Valve Seat Insert; Incl Key 30, Valve Seat Insert; (For Az30319), Valve Seat Insert; Incl Key 5, Valve Seat Insert; Incl Key 273
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : Hdraulic Pump-Cessna Type 24335 Lab [01e06]
3***0O-Ring; (Kit Ar78501), O-Ring, O-Ring; 3/32" X 7/8", O-Ring; (Sub For U11343, This Application), O-Ring; (B), O-Ring; (A), O-Ring; (A) (B), O-Ring; (A) (Sub For U11343 Appl), O-Ring; (Sub For U11343 Appl), O-Ring; (Sub For U11343), O-Ring; (A) (C), O-Ring; Ar, O-Ring; (Sub N130510, This Application), O-Ring; (B) 3/32" X 7/8", O-Ring; 21.895 X 2.616 mm (0.862" X 0.103"), O-Ring; (Sub For R48917, U11343), O-Ring; (Sub For R48917 Or U11343), O-Ring; 21.895 X 2.616 mm (0.862" X 0.103"), O-Ring; (Sub For R48917, U11343 Appl), O-Ring; (A) (Sub At15859)1
AH***42Seal; (Kit Ah101242), Seal; Nsep (Ord Ah66648), Seal, Seal; (K), Seal; (Kit Ah66648), Seal; (A), Seal; (Kit Ah79116), Seal; (A) Drive Shaft, Seal; Shaft, Seal; (Kit Ah79116 And Ah101242), Seal; Kit Ah79116, Seal; (A) (C)1
AH***73Housing; Front, With Bushings, Housing, Housing; Plate Assembly, With Bearing, Front, Housing; (C) With Bushings, Housing; Front, Housing; With Bushings, Housing; Plate, Front, With Bushing1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : Hydraulic Oil Reservoir [01e22]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm6
14***29Nut; M8, Nut; (A) 8mm, Nut; 950, M8, Nut; M8, 6,6x12,5x1,6, Nut; (A) M8 (Sub For 14m7137), Nut; (A: Area Counter Support, R.H. Side) M8, Nut; M8 Includes Dq11813 And Dq12055, Nut; M6, Nut; (A) ,M8, Nut; M8 M8x16, Nut; (A) M8, Nut; M8, 8, Nut; (C) M8, Nut; X M8, Nut; X M8, Nut; M8, (312), Nut; M8 (Sub For Sb12293201/0), Nut; Ar, M8, Nut; (A: Rice/Corn) M8, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8, Nut; 8mm, Nut; 960, M8, Nut; M8 (Sub For 14m7137), Nut; M8 (Sub For 14m6825), Nut; 970, M8, Nut; (B), Nut; M8 Use With Az17518, Nut; Lh, M8, Nut; M8, M, Nut; M8 (For Al63397), Nut; M8, M8, Nut; M8 (Sub For 14m7137, 14m7140), Nut; M8, Use W/ Az17516 - Az17518, Nut; M8, (Use With Az17518), Nut; M9, Nut; (B) M8, Nut; 5/16" 8mm, Nut; 930, M8, Nut; (B: Without Lateral Tilt) M8, Nut; M8 |, Nut; M8, M12x35, Nut; (A: Rice Version) M8, Nut; M10, Nut; M8, M8, 8mm, Nut; Ar, Lh, M8, Nut; 8x1,25mm, Nut; M8, (10.9), Nut; 8 mm, Nut; Ar M8, Nut; M8 X 20, Nut; 940, M8, Nut; M8, 940w/ 343, Nut; 8mm (Sub For 14m7137), Nut; M8, 8x7mm, Nut; M8, (312) M8, Nut; (A: For Usa Only) M8, Nut; M8, 8mm, Nut; M8 M8, Nut, Nut; M8, (312) M10, Nut; (A) (B) M8, Nut; (A: Discharge Spout (High Arc)) M8, Nut; Ar L.H. M8, Nut; M8, (B), Nut; (B: For Usa Only) M84
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : Hydraulic Pump Cessna Typ 200 100 Lbe [01e04]
AE***71Drain Plug; (B), Drain Plug; Incl Key 20 (Sub For Ah19266), Drain Plug; (Sub For Ah19266), Drain Plug; (B) (C), Drain Plug; (C) (Sub For Ah19266, This Application), Drain Plug; (Kit Ah101269), Drain Plug1
AH***65Fitting; Incl.Key 14, Fitting; (C), Fitting, Fitting; Incl Key 21, Fitting; Plug, With O-Ring, Fitting; Incl Key 17, Fitting; (B) (Sub R39112 And R375r), Fitting; (Kit Ah101269)1
AH***07Fitting; (Sub An122335), Fitting; Incl.Key 8, Fitting; Incl Key 19, Fitting1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : M E M O R A N D A [01e24]
John Deere : 940 - Combine : 35 Main Hydraulic : Mounting Parts For Hydraulic Pump [01e08]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm1
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm1
12***17Lock Washer; 16 M, Lock Washer; 16 mm, Lock Washer; (A) 16mm, Lock Washer; (B) 16mm, Lock Washer; 16mm, Lock Washer; M16, Lock Washer; 16.200 mm, Lock Washer, Lock Washer; Ar, 16 mm, Lock Washer; (A) 16 mm, Lock Washer; Fwd, Lock Washer; 16mm (Sub For 12m1629), Lock Washer; 940, 16 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : Mounting Parts For Hydraulic Pump [01e09]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm1
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm1
12***17Lock Washer; 16 M, Lock Washer; 16 mm, Lock Washer; (A) 16mm, Lock Washer; (B) 16mm, Lock Washer; 16mm, Lock Washer; M16, Lock Washer; 16.200 mm, Lock Washer, Lock Washer; Ar, 16 mm, Lock Washer; (A) 16 mm, Lock Washer; Fwd, Lock Washer; 16mm (Sub For 12m1629), Lock Washer; 940, 16 mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : Selective Control Valve-Dual [01e16]
32***4ALock Plate2
AH***80Fitting; Incl Keys 9,22, Fitting; Incl Keys 2,3, Fitting; Incl Keys 9,19, Fitting2
AN***40Poppet; (Kit An152240), Poppet, Poppet; (Ord Keys 17,18,22,23 Appl), Poppet; (A) (Sub For Ah80223, This Application), Poppet; (Ord Keys 17,18,21,22 Appl), Poppet; (A), Poppet; (For Az19373), Poppet; (Ord Keys 17,18,20,21 Appl), Poppet; (Kit Ah101489 And Ah108721), Poppet; (Kit Ah78794), Poppet; (Kit Ah78792), Poppet; (A) (Double Acting Cylinder), Poppet; (Kit Ah108721), Poppet; (K)4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : Selective Control Valve-Single [01e18]
AH***23Valve Seat Insert, Valve Seat Insert; (For Az19373), Valve Seat Insert; With O-Ring2
AH***88Plug, Plug; Filter, Plug; With Filter, Plug; Cap, Filter1
AH***89Fitting, Fitting; With O-Ring And Backup Washer1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : Selective Control Valve-Single [01e20]
AH***80Fitting; Incl Keys 9,22, Fitting; Incl Keys 2,3, Fitting; Incl Keys 9,19, Fitting1
AH***88Plug, Plug; Filter, Plug; With Filter, Plug; Cap, Filter1
AN***40Poppet; (Kit An152240), Poppet, Poppet; (Ord Keys 17,18,22,23 Appl), Poppet; (A) (Sub For Ah80223, This Application), Poppet; (Ord Keys 17,18,21,22 Appl), Poppet; (A), Poppet; (For Az19373), Poppet; (Ord Keys 17,18,20,21 Appl), Poppet; (Kit Ah101489 And Ah108721), Poppet; (Kit Ah78794), Poppet; (Kit Ah78792), Poppet; (A) (Double Acting Cylinder), Poppet; (Kit Ah108721), Poppet; (K)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 35 Main Hydraulic : Selective Control Valve-Triple [01e10]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
14***29Nut; M8, Nut; (A) 8mm, Nut; 950, M8, Nut; M8, 6,6x12,5x1,6, Nut; (A) M8 (Sub For 14m7137), Nut; (A: Area Counter Support, R.H. Side) M8, Nut; M8 Includes Dq11813 And Dq12055, Nut; M6, Nut; (A) ,M8, Nut; M8 M8x16, Nut; (A) M8, Nut; M8, 8, Nut; (C) M8, Nut; X M8, Nut; X M8, Nut; M8, (312), Nut; M8 (Sub For Sb12293201/0), Nut; Ar, M8, Nut; (A: Rice/Corn) M8, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8, Nut; 8mm, Nut; 960, M8, Nut; M8 (Sub For 14m7137), Nut; M8 (Sub For 14m6825), Nut; 970, M8, Nut; (B), Nut; M8 Use With Az17518, Nut; Lh, M8, Nut; M8, M, Nut; M8 (For Al63397), Nut; M8, M8, Nut; M8 (Sub For 14m7137, 14m7140), Nut; M8, Use W/ Az17516 - Az17518, Nut; M8, (Use With Az17518), Nut; M9, Nut; (B) M8, Nut; 5/16" 8mm, Nut; 930, M8, Nut; (B: Without Lateral Tilt) M8, Nut; M8 |, Nut; M8, M12x35, Nut; (A: Rice Version) M8, Nut; M10, Nut; M8, M8, 8mm, Nut; Ar, Lh, M8, Nut; 8x1,25mm, Nut; M8, (10.9), Nut; 8 mm, Nut; Ar M8, Nut; M8 X 20, Nut; 940, M8, Nut; M8, 940w/ 343, Nut; 8mm (Sub For 14m7137), Nut; M8, 8x7mm, Nut; M8, (312) M8, Nut; (A: For Usa Only) M8, Nut; M8, 8mm, Nut; M8 M8, Nut, Nut; M8, (312) M10, Nut; (A) (B) M8, Nut; (A: Discharge Spout (High Arc)) M8, Nut; Ar L.H. M8, Nut; M8, (B), Nut; (B: For Usa Only) M82
19***85Cap Screw; (A: Use With One Set Of Clamps) M8 X 60, Cap Screw; M8 X 60 Used With One Set Of Clamps, Cap Screw; M8 X 60 (Sub For Es10347), Cap Screw; M8 X 60 Hs=10.9, Cap Screw, Cap Screw; M8 X 60 (Use With 14m7273), Cap Screw; M8 X 60, (Sub For Es10347), Cap Screw; M8 X 60 M8x12, Cap Screw; 8x60mm, Cap Screw; M8 X 60, Cap Screw; M8 X 60 M8x60, Cap Screw; (A: Category Iii N) M8 X 60 M8x60, Cap Screw; (A) (B) M8 X 60, Cap Screw; M8 X 65, Cap Screw; M8 60, Cap Screw; (A: For Machines With Hydraulic Brake System) M8 X 60, Cap Screw; M8 X 60, (Sub For Cq06958), Cap Screw; (A: Only For North America And Japan) M8 X 60, Cap Screw; M8 X 60 (Shear Bolt), Cap Screw; (A: Tractor Serial Number) M8 X 60, Cap Screw; (A: Category Iii N) M8 X 60, Cap Screw; M8 X 60, Cap Screw; M8 X 60 Cat Iiin, Cap Screw; M8x60, Cap Screw; M8 X 60 Sub For 19m7800, Cap Screw; (B: With Electr. Reverser Control) M8 X 60, Cap Screw; M8 X 60 Cat Iii N, Cap Screw; M8x65, Cap Screw; M8 X 60, M8x60, Cap Screw; (A) M8 X 60, Cap Screw; (B) M8 X 60, Cap Screw; M8 X 60, (Sub For N203882), Cap Screw; M8 X 60 ( Shear Bolt ), Cap Screw; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) M8 X 60, Cap Screw; M8 X 60 (A), Cap Screw; Ar2
See all parts with full part numbers in Heavy Parts AI →
36 Hydraulic Cylinder
John Deere : 940 - Combine : 36 Hydraulic Cylinder : Platform Lift Cylinder [01f03]
11***28Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44***59, 5520: Sn -45***00) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-00***13), 5403 (-00***75).), Pin; 5 X 32 mm, (Sub For 11h218)2
11***38Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm2
44***66Pin; 18 X 80 X 66 mm, Pin; 18x80mm, Pin; M18 X 80 X 66, Pin1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 36 Hydraulic Cylinder : Platform Lift Cylinder [01f08]
11***27Cotter Pin; 5 X 28 mm, 8.4x24x2mm, Cotter Pin; 5 X 28 mm, Cotter Pin; 5 X 30 mm, Cotter Pin; 5x28mm, Cotter Pin; 5x30mm, Cotter Pin, Cotter Pin; M5 X 30, Cotter Pin; (312) 5x28mm2
11***38Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm2
44***66Pin; 18 X 80 X 66 mm, Pin; 18x80mm, Pin; M18 X 80 X 66, Pin1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 36 Hydraulic Cylinder : Steering-Cylinder [01f04]
12***04Part Missing In Wise; 3/8", Outer, Part Missing In Wise; (A: Not Required) 3/8", Part Missing In Wise; (E) 3/8", Part Missing In Wise; 3/8" (B) (C), Part Missing In Wise; 3/8" (Not Longer Required), Part Missing In Wise; (C: (-Xxxxxx) 4050-00***92; 4250-01***53; 4450-02***81) 3/8" (Sub For R53668), Part Missing In Wise; 3/8", (Use With 19h3219) (Not Required With E55662), Part Missing In Wise; 3/8" (4050), Part Missing In Wise; 3/8", (Sub For Mg80679), Part Missing In Wise; 3/8", (Code 3904), Part Missing In Wise; 3/8" (B), Part Missing In Wise; (A: 5103e/5104/5204/5038d(00***01-), 5103/5103s(00***91-), 5203(00***82-).) 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With H108673), Part Missing In Wise; 3/8" (Saran Cd), Part Missing In Wise; 3/8", (Rs, Ut, Or), Part Missing In Wise; (B) (C) 3/8", Part Missing In Wise; 3/8", (Delco Remy), Part Missing In Wise; (B: Hi-Crop) 3/8", Part Missing In Wise; 3/8", (Not Used With E55662), Part Missing In Wise; (B: W/O Sound-Gard Body) 3/8", Part Missing In Wise; 3/8" (Use With R59409), Part Missing In Wise; 3/8", (Code 1601 And 1610), Part Missing In Wise; 3/8" (Pulley To Fan Spacer) Code 2314 (Af Only), Part Missing In Wise; (A) Roosa Master Dp,3/8", Part Missing In Wise; 3/8" (Sub For Ar52325), Part Missing In Wise; (A: From Sr.No.5103e/5103/5103s/5203-12***72, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; (C: Not Required) 3/8", Part Missing In Wise; 3/8" (913, 915, 918 And 924), Part Missing In Wise; 3/8", (Ru And Or), Part Missing In Wise; 3/8", (Rs), Part Missing In Wise; (B: (Xxxxxx-) 4555-01***00; 4755-01***01; 4955-01***49) 3/8", Part Missing In Wise; 3/8" (Radiator Brace Strut), Part Missing In Wise; X X (A) 3/8", Lock Washer; 3/8", Part Missing In Wise; (A) 3/8", (Use With R59409), Part Missing In Wise; 3/8", (Code 3102) (Not Req. W/E55662), Part Missing In Wise; 3/8", (Sub For Mg80680 And Mg80702), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8", (No Longer Required With 19h1936), Part Missing In Wise; 3/8", (Not Required With E55661), Part Missing In Wise; 3/8" (Without Dial-A-Matic), Part Missing In Wise; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Part Missing In Wise; 3/8", (Ru), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Part Missing In Wise; 3/8" Rh, Part Missing In Wise; 3/8" (Use With R53382), Part Missing In Wise; 9.525 mm (3/8") (854a, -61***50; 1253a, -61***00), Part Missing In Wise; 3/8", (Not Req. W/E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With 14h812), Part Missing In Wise; 3/8", (Not Required W/E55662), Part Missing In Wise; (B: (Xxxxxx-) Serial No. 8450-00***19; 8650-00***98) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) 3004 And 3005, Part Missing In Wise; 3/8", (Code 4102), Part Missing In Wise; 3/8" (Use With 19h3267), Part Missing In Wise; 3/8", 6216, Part Missing In Wise; 3/8", (Not Required W/ E55662), Part Missing In Wise; (A: (-Xxxxxx) 4250-00***71; 4450-01***05) 3/8", Part Missing In Wise; (No Longer Required With R41041), Part Missing In Wise; 3/8", (Standard Models), Lock Washer; 3/8", (Use With 19h2284) (Use With 19h2284), Part Missing In Wise; 3/8" Hi-Crop, Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***48; 8650-00***90) 3/8", Part Missing In Wise; 3/8" W/Rg, Part Missing In Wise; 3/8" (Sub For Mg80680), Part Missing In Wise; (B: (-Xxxxxx) 4650-00***55; 4850-00***27) 3/8", Part Missing In Wise; 3/8", 730 Tractor, Part Missing In Wise; 3/8", For 12' Harrow, Part Missing In Wise; 3/8" (Less Power Take-Off), Part Missing In Wise; 3/8", (Use With R191204), Part Missing In Wise; 3/8" 3/8" X 3/4", Part Missing In Wise; (A) 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Nlr For E55662), Part Missing In Wise; 3/8", (Not Used On 570), Part Missing In Wise; 3/8", (22 Used, Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", For 3179dl016, Part Missing In Wise; 3/4", Part Missing In Wise; (Use With 14h1076), Part Missing In Wise; 3/8", (Diesel), Part Missing In Wise; 3/8", (No Longer Required With 19h3483), Part Missing In Wise; 3/8", Roll Top, Part Missing In Wise; (B: 2 Used Dual, 3 Used Triple) 3/8", Part Missing In Wise; 3/8", (Use With Ar87023 Or Ar87024), Part Missing In Wise; 3/8", Code 2311 (Af, Af001) (Pulley To Fan Spacer), Part Missing In Wise; (A: Less Rockshaft) 3/8", Part Missing In Wise; (C: (-Xxxxxx) 4050-00***92; 4250-01***53; 4450-02***81) 3/8", Part Missing In Wise; 3/8", (Manual), Part Missing In Wise; 3/8" 3/8" Ar, Part Missing In Wise; 3/8", (Orchard Fenders), Part Missing In Wise; (A: Less Power Take-Off) 3/8", Part Missing In Wise; 3/8", Use With Furrower, Part Missing In Wise; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8", Part Missing In Wise; (A) (B) (C) 3/8", Part Missing In Wise; 3/8", Code 2311(Tf), Part Missing In Wise; (A) (C) (E) 3/8", Part Missing In Wise; (C: Use With Ar55639, Ar62267, Ar77254, Re13722, Re41875, Ty6701, Ty6710 And Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", (Use With R90994), Part Missing In Wise; 3/8", (Sub For T11088), Part Missing In Wise; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", (Not Req. W/ E55662), Part Missing In Wise; 3/8" (Use With R55396), Part Missing In Wise; 3/8", (3 Used 4640 (B)) (2 Used 4840), Part Missing In Wise; 3/8" (With Dial-A-Matic), Part Missing In Wise; 3/8, Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf), Part Missing In Wise; 3/8", (2 On Level Land;1 On Sidehill), Part Missing In Wise; 3/8" (Use With 19h2284), Part Missing In Wise; 3/8" (Not Shown), Part Missing In Wise; 3/8" (For Ar68802), Part Missing In Wise; (C) 3/8", (Not Required With E55662), Part Missing In Wise; 9.525 mm, (Saran Cd), Part Missing In Wise; 3/8" Na, Part Missing In Wise; 3/8", (Used With Gresen Valve), Part Missing In Wise; 3/8" (920, 922, 925 And 930), Part Missing In Wise; 3/8", For 3.0 M (10') Size, Part Missing In Wise; 3/8", (Not Required With E55662) (3011, 3016), Part Missing In Wise; 3/8", (Use With Re30427), Part Missing In Wise; 3/8", For 8-Tooth Section, Part Missing In Wise; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Part Missing In Wise; 3/8", (5 Used Syncro-Range) (6 Used Power Shift), Part Missing In Wise; (B: Less Rockshaft) 3/8", Part Missing In Wise; 3/8", (Use With T25701), Part Missing In Wise; 3/8", (4 Used Dual Selective Control), Part Missing In Wise; 3/8" (Rigid), Part Missing In Wise; 3/8", (Use With 24m7096), Part Missing In Wise; (A: (-Xxxxxx) 4650-00***65; 4850-00***01 (Pst)) 3/8", Part Missing In Wise; 3/8" (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Alternator To Dash), Part Missing In Wise; (Nlr With R41041), Part Missing In Wise; 3/8", (Hb-G, Gh-01), Part Missing In Wise; 3/8", (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Use With R82180 Or R100676) Code 2501 And 2503, Part Missing In Wise; 3/8", (Rc And St), Part Missing In Wise; 3/8", (Use With 19h2284), Part Missing In Wise; 3/8" (132", -68***74; 154", -68***09), Part Missing In Wise; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Part Missing In Wise; 3/8", (Or), Part Missing In Wise; 3/8", (Use With 19h3219), Part Missing In Wise; 9.525 mm (3/8"), Part Missing In Wise; 3/8", (Rs, Ru, Rus, Ut, Or), Part Missing In Wise; 3/8" (Use With At24256 Or At31394), Part Missing In Wise; 3/8" (No Longer Required), Part Missing In Wise; 3/8", For 915, Part Missing In Wise; 3/8" (For 19h2676, 19h1648), Part Missing In Wise; 3/8", (Adjustable Rear Axle), Part Missing In Wise; 3/8" (918 Rigid), Part Missing In Wise; (C: 42" Tire) 3/8", Part Missing In Wise; 3/8", (Use With R82180 Or R100676), Part Missing In Wise; 3/8", (Use With H108673), Part Missing In Wise; 3/8", (Not Req. With E55662), Part Missing In Wise; 3/8", (2 Used Single Selective Control) (4 Used Dual Selective Control), Part Missing In Wise; (Sub For R53668), Part Missing In Wise; 3/8", For 3.7 M (12') Size, Part Missing In Wise; 3/8" (For R57059), Part Missing In Wise; 3/8" (Nlr), Part Missing In Wise; (A: (-Xxxxxx)4755-01***03;4955-01***24) 3/8", Part Missing In Wise; 3/8" (Sgb), Part Missing In Wise; 3/8", (120 Used L.H.) (120 Used R.H.), Part Missing In Wise; 3/8" (Less Rockshaft), Part Missing In Wise; 3/8", (Use With H149504), Part Missing In Wise; 3/8", 2350, Part Missing In Wise; 3/8", (Code 2819), Part Missing In Wise; 3/8", (Cable), Part Missing In Wise; (A: Code 2501) (B: Code 2502) 3/8", Part Missing In Wise; 3/8", (Cab), Part Missing In Wise; 3/8" 918 (65***01-) 75 Used, Part Missing In Wise; 3/8", (1 Used L.H.) (1 Used R.H.), Part Missing In Wise; (Lu) (Orchard Fenders), Part Missing In Wise; 3/8", (Dn-02), Part Missing In Wise; 3/8" (Sub For (2) Mg80680), Part Missing In Wise; 3/8" (Use With R53396), Part Missing In Wise; 3/8", (Not Req. W/E55662), Part Missing In Wise; Ar, 3/8", Part Missing In Wise; 3/8", (Code 2111 And 3904), Part Missing In Wise; 3/8", (Use With Am124305 Front Frame), Part Missing In Wise; 3/8" (Code 4101), Part Missing In Wise; 3/8" (Level Land), Part Missing In Wise; 3/8" 3/8", Part Missing In Wise; (A: Mexico) (B: Turkey) 3/8", Part Missing In Wise, Part Missing In Wise; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8" (No Longer Required With R41041), Part Missing In Wise; 3/8", (Sub For T12634), Part Missing In Wise; 3/8", (Lp-Gas), Part Missing In Wise; 3/8", Used With Steel Moldboard, Part Missing In Wise; 3/8" Nla, Part Missing In Wise; 3/8", For 600 And 610, Part Missing In Wise; (B: Engine Serial No.) 3/8", Part Missing In Wise; (B: Radar Bracket To Transmission Sump Line Shield Bracket Screw) 3/8", Part Missing In Wise; 3/8", (A), Part Missing In Wise; (A) 3/8", Mechanical Front Wheel Drive, Part Missing In Wise; 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Part Missing In Wise; 3/8", Ar, Part Missing In Wise; (B: (Xxxxxx-) Esn 4650-32***15; 4850-32***46) 3/8", Part Missing In Wise; (A: From Sr.No. 5038d(00***62-)) 3/8", Part Missing In Wise; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Part Missing In Wise; (A: From Sr.No.5103s/5203-12***72, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Part Missing In Wise; 3/8" (Sgb) Nlr, Part Missing In Wise; (A: Power Shift Transmission) 3/8", Part Missing In Wise; 3/8", (Sub K40003, This Application Only), Part Missing In Wise; (A: W/O Sound-Gard Body) 3/8", Part Missing In Wise; (K) 3/8", Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 24" X 8" X 14" 20pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8" (Flexible), Part Missing In Wise; (B: (Xxxxxx-) 4560-00***21; 4760-00***79; 4960-00***06) 3/8", Part Missing In Wise; 3/8", (Sub For R53668), Part Missing In Wise; (A) (B) 3/8", Part Missing In Wise; 3/8", Internal Tooth, Part Missing In Wise; 3/8", (Ea-G, Ge-01), Part Missing In Wise; 3/8" (Use With Delco-Remy), Part Missing In Wise; 3/8", Code 2314 (Af Only), Part Missing In Wise; 3/8" (4 Used, Rh; 5 Used, Lh), Part Missing In Wise; (A: Use With Ar87205) 3/8", Part Missing In Wise; 3/8", (Use With 14h1076 And 19h3239), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***13; 8650-00***23) 3/8", Part Missing In Wise; 3/8", For Spike-Tooth Sections, Part Missing In Wise; 3/8" (W/O Sgb), Part Missing In Wise; 3/8", (Use With 19h3239), Part Missing In Wise; (C: 3 Used Triple, 4 Used Quad) 3/8", Part Missing In Wise; 3/8" (Use With Re61087), Lock Washer; 3/8", (Use With R125195), Part Missing In Wise; X, Part Missing In Wise; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Part Missing In Wise; 3/8", (Use With Re33058), Part Missing In Wise; 3/8", (Nlr), Part Missing In Wise; (A: For Steel Moldboard) 3/8", Part Missing In Wise; (A: W/O Sgb) 3/8", Part Missing In Wise; 3/8", (Less Power Steering), Part Missing In Wise; 3/8", (Use With R59409 Or R81072), Part Missing In Wise; 3/8", For 4.6 M (15') Size, Part Missing In Wise; 3/8" (Sub T56055), Part Missing In Wise; (A: For Switzerland Only) 3/8", Part Missing In Wise; 3/8", (Mower Bar Only), Part Missing In Wise; (A) (B) (C) (D) 3/8", Part Missing In Wise; (Orchard Fenders), Part Missing In Wise; (A: (-Xxxxxx) 4650-01***77; 4850-01***15) 3/8", Lock Washer; 9.525 mm (3/8"), Part Missing In Wise; 3/8", 1350, Part Missing In Wise; 3/8", (Use With 19h2104 And 19h2855), Part Missing In Wise; 3/8", (Code 3903), Part Missing In Wise; 3/8", For 400, Part Missing In Wise; 3/8" To Secure Battery Cables To Frame, Part Missing In Wise; 3/8", For 15'3" Harrow, Part Missing In Wise; 3/8" (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; 3/8" (A), Part Missing In Wise; 3/8" (Use With 19h3239), Part Missing In Wise; 3/8", Terminal, Part Missing In Wise; 3/8" (Not Required W/E55662), Part Missing In Wise; 3/8", For 3179dl001, Part Missing In Wise; (A) 3/8", Part Missing In Wise; 3/8" (Use With H149504), Part Missing In Wise; 3/8" (Sub For R53668), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***53; 8650-00***74) 3/8", Part Missing In Wise; (A: (-Xxxxxx) Esn 4650-32***14; 4850-32***45) 3/8", Part Missing In Wise; 3/8", (750), Lock Washer; 3/8", (Sub For Ffsb107931), Part Missing In Wise; 3/8", (Use With R81911) Code 2501 And 2503, Part Missing In Wise; 3/8" (34 Harvester), Part Missing In Wise; (A: Contained In Ar94567) 3/8", Part Missing In Wise; (A: 5045d(00***75-), 5055d(00***19-), 5045e(00***74-), 5055e(00***75-), 5065e(00***02-), 5075e(00***21-)) 3/8", Part Missing In Wise; 3/8", For 810, Part Missing In Wise; (F: Used With Steel Moldboard) 3/8", Part Missing In Wise; 3/8", (13 Used, Rc And St) (11 Used, Ru And Or), Part Missing In Wise; 3/8", For 10' Harrow, Part Missing In Wise; (Use With 19h2284), Part Missing In Wise; 3/8", (St), Part Missing In Wise; 3/8", (Use With Ar77343), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8" (Nlr), Part Missing In Wise; 3/8" (For 19h3267), Part Missing In Wise; (A) 3/8", (No Longer Available), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8", Used With Fiber Glass Seed Hopper, Part Missing In Wise; 9.525 mm (3/8") (Use With 19h1936), Part Missing In Wise; 3/8", (Rc, Ru, Rus), Part Missing In Wise; 3/8", (Not Required With 19h1936), Part Missing In Wise; 3/8", (2 Used, Variable Drive; 4 Used, Long), Part Missing In Wise; 3/8", (Code 6205), Part Missing In Wise; (A: (-Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) (Use With 19h3219), Part Missing In Wise; 3/8", (Use With R125586), Part Missing In Wise; 3/8" (Pst), Part Missing In Wise; 3/8", Used On Beet Planter, Part Missing In Wise; (B: 24 And 224 Balers) 3/8", Part Missing In Wise; (E) 9.525 mm (3/8"), Part Missing In Wise; 3/8" (A), (B), Lock Washer; 3/8", (Use With 19h3239), Part Missing In Wise; 3/8", (Sub R44302), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Part Missing In Wise; 3/8", (Not Longer Required), Part Missing In Wise; (No Longer Required), Part Missing In Wise; 3/8", (Use With 24h1303), Part Missing In Wise; 3/8" Lh, Part Missing In Wise; 3/8", (Use With R59409), Part Missing In Wise; 9.525 mm, Part Missing In Wise; 3/8", (Sub K40003, This Application), Part Missing In Wise; 3/8", (2 Used Single) (4 Used Dual), Part Missing In Wise; 3/8" Battery Terminal (1 Used Single Battery) (2 Used Dual Battery) (Use With Ar66424), Part Missing In Wise; 3/8", (Use With A24646 Or A24647 And A24651), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8" (Nlr), Part Missing In Wise; 3/8" (Not Req. With E55662), Part Missing In Wise; 3/8", (Mower Bar), Part Missing In Wise; 3/8", (Cornhead Attachment), Part Missing In Wise; 3/8", (Ru, Rc), Part Missing In Wise; (Sub F16202), Part Missing In Wise; 3/8", 28-Inch Rows, Part Missing In Wise; (A: Engine Serial No.) 3/8", Part Missing In Wise; (C), Part Missing In Wise; 3/8", (Code 1701, 1702 And 1703), Part Missing In Wise; 3/8", Code 3905, Part Missing In Wise; 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Use With Ar11116), Part Missing In Wise; 3/8" (Rg), Part Missing In Wise; 3/8" (8 Used Dual) (12 Used Triple), Part Missing In Wise; 3/8", (No Longer Required With R41041), Part Missing In Wise; (B) 3/8", Part Missing In Wise; 3/8" (Qrt), Part Missing In Wise; 3/8", (Use With R114130, 14h812 And 19h3219), Part Missing In Wise; 3/8" (Not Required), Part Missing In Wise; 3/8", (Code 2108), Part Missing In Wise; 3/8" (D), Part Missing In Wise; 3/8" (No Longer Required, This Application), Part Missing In Wise; 3/8", (Motorola), Part Missing In Wise; 3/8" (Nla), Part Missing In Wise; 5/16", Part Missing In Wise; 3/8", (No Longer Required), Part Missing In Wise; 3/8", (Code 2101, 2102, Or 2109), Part Missing In Wise; 3/8" (Fan To R100682, R100676, R90561 Or R82180) Code 2314 (Af Only), Part Missing In Wise; 3/8", (Use With 14h1076), Part Missing In Wise; 3/8", (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Use With Ar55094), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8", Part Missing In Wise; (A: From Sr. No. 5103s-00***91, 5203-00***82, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; (B) 3/8", (Sub For R1870r), Part Missing In Wise; (C: Carbon Brush Conductor) 3/8", Part Missing In Wise; 3/8", For Gauge Shoe, Part Missing In Wise; 3/8", For R128566, R131753, Part Missing In Wise; 3/8", (Ea-D, Ea-G, Ha-G, De-01, Ge-01), Part Missing In Wise; (C: 5303 (-00***07), 5403 (-00***42).) 3/8", Part Missing In Wise; 3/8", (Use With 19h2676), Part Missing In Wise; 3/8", Fertilizer Opener, Part Missing In Wise; No 10, Part Missing In Wise; (A: From Sr.No. 5103s(01***67-), 5104(01***62-), 5204(00***15-)) 3/8", Part Missing In Wise; (A) (C) 3/8", Part Missing In Wise; X X X 3/8", Part Missing In Wise; 3/8", (Delco-Remy), Part Missing In Wise; (Code 1709), Part Missing In Wise; 3/8", (Use With Ar87024 Or Ar87023), Part Missing In Wise; 3/8", 4020 Or 4010 Tractor, Part Missing In Wise; (A) (B) 9.525 mm (3/8"), Part Missing In Wise; 3/8", (To Clip), Part Missing In Wise; 3/8", 2 Or 4 Used, Part Missing In Wise; 3/8", (Used With Victor Valve), Part Missing In Wise; 3/8", (Row-Crop), Part Missing In Wise; 3/8", (Use With Re19265), Part Missing In Wise; 3/8", For B27852 Only, Part Missing In Wise; 3/8" Low, Part Missing In Wise; 3/8" (A) (B), Part Missing In Wise; 3/8", (1 Used Single Selective Control) (2 Used Dual Selective Control), Part Missing In Wise; 3/8", (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; (A), Part Missing In Wise; 3/8", (Code 7001, 7002, 7003, And 7004), Part Missing In Wise; 3/8", Code 2311(Af, Af001), Part Missing In Wise; 3/8", (4 Used, Variable Drive; 6 Used, Long), Part Missing In Wise; 3/8", External Tooth, No. 10, Part Missing In Wise; 3/8" Ar, Part Missing In Wise; 3/8", (A), (D), Part Missing In Wise; (C) 3/8", Part Missing In Wise; 3/8", Part Missing In Wise; 3/8", 8650 Tractor, Part Missing In Wise; 3/8", (31 Used, 6'; 43 Used, 8'), Part Missing In Wise; 3/8", (Use With Ar36849), Part Missing In Wise; 3/8", (Regular), Part Missing In Wise; 3/8" (Use With R191204), Part Missing In Wise; (A: Assembly Listed Below Contains All Parts Identified By (A):) 3/8" (Use With R59409), Part Missing In Wise; 3/8", (No Longer Available), Part Missing In Wise; (A: Quad-Range Transmission) 3/8", Part Missing In Wise; 3/8", (Afd - No Longer Required), Part Missing In Wise; (E) 3/8", (Use With Ar66424), Part Missing In Wise; 3/8", Code 3907, Part Missing In Wise; 3/8" 3\8", Part Missing In Wise; 3/8", (Code 4101), Part Missing In Wise; 3/8" (Not Required W/E55662 Or 14h1090), Part Missing In Wise; (D) 3/8", Part Missing In Wise; 3/8" ((1) Per Spare Shear Bolt), Part Missing In Wise; 3/8" (6620 Sidehill), Part Missing In Wise; (A) 3/8", Outer, Part Missing In Wise; 3/8", 28" Rows Only, Part Missing In Wise; 3/8", For 6-Tooth Section, Part Missing In Wise; 3/8", 4010 Or 4020 Tractor, Part Missing In Wise; 3/8", (Saran Cd), Part Missing In Wise; 3/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Part Missing In Wise; 3/8", (Sub T56055), Part Missing In Wise; (A: No Longer Required) 3/8", Part Missing In Wise; 3/8", (18 Used Steel Pan) (21 Used Cast Iron Pan), Part Missing In Wise; 3/8", (6401), Part Missing In Wise; 3/8", (Not Required), Part Missing In Wise; 3/8", (Use With Ar66424 Or At25619), Part Missing In Wise; 3/8", (Not Req W/ E55662), Part Missing In Wise; (A) (B) (D) (E) 3/8", Part Missing In Wise; 3/8", (650), Part Missing In Wise; 3/8", (K1) (K2), Part Missing In Wise; 3/8" (Use With Motorola), Part Missing In Wise; 3/8", No. 20 Hitch, Part Missing In Wise; 3/8" (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Or, Rs, Rus, Ut), Part Missing In Wise; Internal-Tooth, No. 10, Part Missing In Wise; 3/8" (Use With Ae24403), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662), Part Missing In Wise; 3/8", (16 Used, 6'; 24 Used, 8'), Part Missing In Wise; 3/8", Code 2311 (Tf) (Pulley To Fan Spacer)2
14***12Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00***66; 7700-00***74; 7800-01***11) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-00***98; 7400-00***38) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-00***66; 7700-00***74; 7800-01***11) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65***01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf2
19***65Cap Screw; (A) 3/8"X3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4") Longitud=95.5mm (3.76") Frente=M10, Cap Screw; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8" X 1-3/4", Cap Screw; (A: Quad-Range Transmission) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Sub For H2783b), Cap Screw; 3/8" X 1-3/4", (2 Used Single) (4 Used Dual), Cap Screw; 3/8" X 1-3/4" (Use With O.And S.), Cap Screw; (A: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Rear Hitch Option), Cap Screw; 3/8" X 1-3/4", (Na-G, Na-L), Cap Screw; (B) 3/8"X1-3/4", Cap Screw; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Chrysler No. 17***45), Cap Screw, Cap Screw; (A) (C) 3/8" X 1-3/4", (Use With Ar45483), Cap Screw; (K) 3/8" X 1-3/4", Cap Screw; (B: Hi-Crop) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", For 5 Section, Cap Screw; 3/8" X 1-3/4", (Ea-G, Ge-01), Cap Screw; 3/8" X 1-3/4", (Ea-G, Hb-G, Ge-01, Gh-01), Cap Screw; 3/8" X 1-3/4", (Illustrated), Cap Screw; 3/8" X 1-3/4", Code 2309 And 2310, Cap Screw; 3/8" X 1-3/4" (Use With C11812 And K36707), Cap Screw; 3/8" X 1-3/4", (100 Per Package) (Sub For Mg88428), Cap Screw; (C: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (4010 And 4320), Cap Screw; 3/8" X 1-3/4", (Use With 12h304 And 14h1076), Cap Screw; 3/8" X 1-3/4", (Use With R58717), Cap Screw; 3/8" X 1-3/4" (Use With Ae24403), Cap Screw; 3/8" X 1-3/4", (Beet, Bean And Vegetable), Bolt, Cap Screw; 3/8" X 1-3/4", (Na-D), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (2 Used, A) (1 Used, B), Cap Screw; 3/8" X 1-3/4", For 915, Cap Screw; 3/8" X 1-3/4", For Spike-Tooth Sections, Cap Screw; 3/8"X1-3/4", Cap Screw; (B: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4", Cap Screw; 3/8"X1-3/8", Cap Screw; (A: ( -Xxxxxx) 7710-00***27; 7810-00***92) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Sae 8), Cap Screw; 2/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4" (Use With Bp12233), Cap Screw; 3/8" X 1-3/4", (2 Used Syncro-Range) (1 Used Power Shift), Cap Screw; (B), Cap Screw; 3/8" X 1-3/4", (Sub (2) 24h1309), Cap Screw; 3/8" X 1-3/4", Low, Cap Screw; (A: 2 Used Dual, 2 Used Triple) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With 14h812), Cap Screw; 3/8" X 1-3/4" (Use With 14h812), (Adjustable Rear Axle), Cap Screw; (A) 3/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Code 6401), Cap Screw; 3/8" X 1-3/4", (For An152412 Shield), Cap Screw; (A) (C) 3/8" X 1-3/4", (Fuel), Cap Screw; 3/8" X 1-3/4", (Notch Filler-Each Side), Cap Screw; 3/8" X 1-3/4" (With Dial-A-Matic), Cap Screw; 3/8" X 1-3/4", (Power Shift), Cap Screw; 3/8" X 1-3/4", Code 2306 And 2307, Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4"), Cap Screw; 3/8" X 3/4", Cap Screw; (A) 3/8" X 1-3/4", Cap Screw; (A: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (D) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Cap Screw; 3/8" X 1-3/4" (Hi-Crop), Cap Screw; 3/8" X 1-3/4" 3/8 Unc-2a X 1 3/4 A17d Zn, Cap Screw; 3/8" X 1-3/4" (Without Dial-A-Matic), Cap Screw; 3/8" X 1-3/4" (100 Per Package) (Sub For Mg88428), Cap Screw; (B) 3/8" X 1-3/4", (Sub For T16517), Cap Screw; 3/8" X 1-3/4", (Sae 8), Cap Screw; (A), Cap Screw; 3/8" X 1-3/4", (Less Rockshaft), Cap Screw; 3/8"X1", Cap Screw; 3/8" X 1-3/4" (Differential Lock), Cap Screw; 3/8" X 1-3/4", Use When Hitch Is Lowered, Cap Screw; 3/8" X 1", Cap Screw; 3/8" X 1-3/4", (675) 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4" (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4", (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 5440 Model Only, Cap Screw; 3/8"X1-1/4" (Sub For 19h246), Cap Screw; 3/8" X 1-3/4", (K1) (K2), Cap Screw; 3/8" X 1-3/4", R.H., Cap Screw; 3/8" X 1-3/4", For 4 Section, Cap Screw; 3/8" X 1-3/4" (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8) (Sub For 19h3217, This Application), Cap Screw; 3/8" X 1-3/4", (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Use With 12h304), Cap Screw; 3/8" X 1-3/4", (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8), (Sub For 19h3217, This Application), Cap Screw; (A) (C) 3/8"X1-3/4", Cap Screw; 3/8"-16 Unc X1-3/4", Cap Screw; 3/8" X 1-3/4" Rh, Cap Screw; 3/8" X 1-3/4", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8"-16 Nc X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4" 1524-2235mm (60"-88"), Cap Screw; 9.525 X 44.450 mm, Cap Screw; 3/8" X 1-3/4", (Sub 19h3217), Cap Screw; 3/8" X 1-3/4", (Sub For Ty7101), Cap Screw; 3/8" X 1-3/4", (2 Used Single Selective Control) (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4", (3020*), Cap Screw; 3/8" X 1-3/4", (3020e), Cap Screw; 3/8" X 1-3/4", (Sub For Hmx03276), Cap Screw; 3/8"X3/4", Cap Screw; (A: Germany) 3/8" X 1-3/4"2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 36 Hydraulic Cylinder : Steering-Cylinder [01f06]
12***95Nut; (A) 4.826 mm (0.190"), Nut, Nut; 4.826 mm (0.190"), Nut; (A) 4.826 mm (0.190") Int. Tooth, Nut; 0.190" (Sub 12m7060), Nut; 0.190" 3/16", Nut; 4.826 mm (0.190") Internal Tooth, (Sub 12m7060), Nut; 0.190", (Sub 12m7060), Nut; 0.190" (For Ar56671), Nut; 4.826 mm, Nut; Internal-Tooth No. 10, Nut; 4.826 mm (0.190") Internal Tooth, Use With Ground Wire, (Sub 12m7060), Nut; 4.826 mm (0.190") External Tooth, (Sub 12m7060), Nut; 0.190", Nut; 4.826 mm (0.190") Germany, (Sub 12m7060), Nut; 0.190", Internal Tooth, Nut; Internal-Tooth, No. 10, Nut; 0.190", (Sub R74466), Nut; 4.826 mm (0.190") (Sub 12m7060), Nut; 0.190" Not Used This Application, Nut; 4.826 mm (0.190") Internal Tooth, Nut; 0.190" No. 10, Lock Washer; 0.190", Nut; 4.826 mm (0.190") (8630, 8640), Nut; No.10, Nut; No. 10, Nut; 4.826 mm (0.190") (Diesel, Less Cab), Nut; (A) (B) 4.826 mm (0.190") (Sub For Au43855) (Sub 12m7060), Nut; (A) 0.190", (Sub 12m7060), Nut; No 10, Nut; (Sub For Mg280254), Nut; 4.826 mm (0.190") All Other European Countries, (Sub 12m7060), Nut; 4.826 mm (0.190") Not Used This Application, (Sub 12m7060), Nut; Internal Tooth, No. 10, Nut; 0.190", (Sub (10) 12m7060), Nut; 10 mm, Nut; 0.190" (Internal Tooth), Nut; 0.190" (Use With At100083 And At100084), Nut; (A) No.10, Nut; 0.190" (Part Of Re15583), Nut; 0.190", (Internal Tooth), Nut; 3/16", Nut; 0.190", No. 10, Internal-Tooth, Nut; Nla4
12***04Part Missing In Wise; 3/8", Outer, Part Missing In Wise; (A: Not Required) 3/8", Part Missing In Wise; (E) 3/8", Part Missing In Wise; 3/8" (B) (C), Part Missing In Wise; 3/8" (Not Longer Required), Part Missing In Wise; (C: (-Xxxxxx) 4050-00***92; 4250-01***53; 4450-02***81) 3/8" (Sub For R53668), Part Missing In Wise; 3/8", (Use With 19h3219) (Not Required With E55662), Part Missing In Wise; 3/8" (4050), Part Missing In Wise; 3/8", (Sub For Mg80679), Part Missing In Wise; 3/8", (Code 3904), Part Missing In Wise; 3/8" (B), Part Missing In Wise; (A: 5103e/5104/5204/5038d(00***01-), 5103/5103s(00***91-), 5203(00***82-).) 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With H108673), Part Missing In Wise; 3/8" (Saran Cd), Part Missing In Wise; 3/8", (Rs, Ut, Or), Part Missing In Wise; (B) (C) 3/8", Part Missing In Wise; 3/8", (Delco Remy), Part Missing In Wise; (B: Hi-Crop) 3/8", Part Missing In Wise; 3/8", (Not Used With E55662), Part Missing In Wise; (B: W/O Sound-Gard Body) 3/8", Part Missing In Wise; 3/8" (Use With R59409), Part Missing In Wise; 3/8", (Code 1601 And 1610), Part Missing In Wise; 3/8" (Pulley To Fan Spacer) Code 2314 (Af Only), Part Missing In Wise; (A) Roosa Master Dp,3/8", Part Missing In Wise; 3/8" (Sub For Ar52325), Part Missing In Wise; (A: From Sr.No.5103e/5103/5103s/5203-12***72, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; (C: Not Required) 3/8", Part Missing In Wise; 3/8" (913, 915, 918 And 924), Part Missing In Wise; 3/8", (Ru And Or), Part Missing In Wise; 3/8", (Rs), Part Missing In Wise; (B: (Xxxxxx-) 4555-01***00; 4755-01***01; 4955-01***49) 3/8", Part Missing In Wise; 3/8" (Radiator Brace Strut), Part Missing In Wise; X X (A) 3/8", Lock Washer; 3/8", Part Missing In Wise; (A) 3/8", (Use With R59409), Part Missing In Wise; 3/8", (Code 3102) (Not Req. W/E55662), Part Missing In Wise; 3/8", (Sub For Mg80680 And Mg80702), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8", (No Longer Required With 19h1936), Part Missing In Wise; 3/8", (Not Required With E55661), Part Missing In Wise; 3/8" (Without Dial-A-Matic), Part Missing In Wise; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Part Missing In Wise; 3/8", (Ru), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Part Missing In Wise; 3/8" Rh, Part Missing In Wise; 3/8" (Use With R53382), Part Missing In Wise; 9.525 mm (3/8") (854a, -61***50; 1253a, -61***00), Part Missing In Wise; 3/8", (Not Req. W/E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With 14h812), Part Missing In Wise; 3/8", (Not Required W/E55662), Part Missing In Wise; (B: (Xxxxxx-) Serial No. 8450-00***19; 8650-00***98) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) 3004 And 3005, Part Missing In Wise; 3/8", (Code 4102), Part Missing In Wise; 3/8" (Use With 19h3267), Part Missing In Wise; 3/8", 6216, Part Missing In Wise; 3/8", (Not Required W/ E55662), Part Missing In Wise; (A: (-Xxxxxx) 4250-00***71; 4450-01***05) 3/8", Part Missing In Wise; (No Longer Required With R41041), Part Missing In Wise; 3/8", (Standard Models), Lock Washer; 3/8", (Use With 19h2284) (Use With 19h2284), Part Missing In Wise; 3/8" Hi-Crop, Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***48; 8650-00***90) 3/8", Part Missing In Wise; 3/8" W/Rg, Part Missing In Wise; 3/8" (Sub For Mg80680), Part Missing In Wise; (B: (-Xxxxxx) 4650-00***55; 4850-00***27) 3/8", Part Missing In Wise; 3/8", 730 Tractor, Part Missing In Wise; 3/8", For 12' Harrow, Part Missing In Wise; 3/8" (Less Power Take-Off), Part Missing In Wise; 3/8", (Use With R191204), Part Missing In Wise; 3/8" 3/8" X 3/4", Part Missing In Wise; (A) 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Nlr For E55662), Part Missing In Wise; 3/8", (Not Used On 570), Part Missing In Wise; 3/8", (22 Used, Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", For 3179dl016, Part Missing In Wise; 3/4", Part Missing In Wise; (Use With 14h1076), Part Missing In Wise; 3/8", (Diesel), Part Missing In Wise; 3/8", (No Longer Required With 19h3483), Part Missing In Wise; 3/8", Roll Top, Part Missing In Wise; (B: 2 Used Dual, 3 Used Triple) 3/8", Part Missing In Wise; 3/8", (Use With Ar87023 Or Ar87024), Part Missing In Wise; 3/8", Code 2311 (Af, Af001) (Pulley To Fan Spacer), Part Missing In Wise; (A: Less Rockshaft) 3/8", Part Missing In Wise; (C: (-Xxxxxx) 4050-00***92; 4250-01***53; 4450-02***81) 3/8", Part Missing In Wise; 3/8", (Manual), Part Missing In Wise; 3/8" 3/8" Ar, Part Missing In Wise; 3/8", (Orchard Fenders), Part Missing In Wise; (A: Less Power Take-Off) 3/8", Part Missing In Wise; 3/8", Use With Furrower, Part Missing In Wise; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8", Part Missing In Wise; (A) (B) (C) 3/8", Part Missing In Wise; 3/8", Code 2311(Tf), Part Missing In Wise; (A) (C) (E) 3/8", Part Missing In Wise; (C: Use With Ar55639, Ar62267, Ar77254, Re13722, Re41875, Ty6701, Ty6710 And Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", (Use With R90994), Part Missing In Wise; 3/8", (Sub For T11088), Part Missing In Wise; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", (Not Req. W/ E55662), Part Missing In Wise; 3/8" (Use With R55396), Part Missing In Wise; 3/8", (3 Used 4640 (B)) (2 Used 4840), Part Missing In Wise; 3/8" (With Dial-A-Matic), Part Missing In Wise; 3/8, Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf), Part Missing In Wise; 3/8", (2 On Level Land;1 On Sidehill), Part Missing In Wise; 3/8" (Use With 19h2284), Part Missing In Wise; 3/8" (Not Shown), Part Missing In Wise; 3/8" (For Ar68802), Part Missing In Wise; (C) 3/8", (Not Required With E55662), Part Missing In Wise; 9.525 mm, (Saran Cd), Part Missing In Wise; 3/8" Na, Part Missing In Wise; 3/8", (Used With Gresen Valve), Part Missing In Wise; 3/8" (920, 922, 925 And 930), Part Missing In Wise; 3/8", For 3.0 M (10') Size, Part Missing In Wise; 3/8", (Not Required With E55662) (3011, 3016), Part Missing In Wise; 3/8", (Use With Re30427), Part Missing In Wise; 3/8", For 8-Tooth Section, Part Missing In Wise; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Part Missing In Wise; 3/8", (5 Used Syncro-Range) (6 Used Power Shift), Part Missing In Wise; (B: Less Rockshaft) 3/8", Part Missing In Wise; 3/8", (Use With T25701), Part Missing In Wise; 3/8", (4 Used Dual Selective Control), Part Missing In Wise; 3/8" (Rigid), Part Missing In Wise; 3/8", (Use With 24m7096), Part Missing In Wise; (A: (-Xxxxxx) 4650-00***65; 4850-00***01 (Pst)) 3/8", Part Missing In Wise; 3/8" (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Alternator To Dash), Part Missing In Wise; (Nlr With R41041), Part Missing In Wise; 3/8", (Hb-G, Gh-01), Part Missing In Wise; 3/8", (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Use With R82180 Or R100676) Code 2501 And 2503, Part Missing In Wise; 3/8", (Rc And St), Part Missing In Wise; 3/8", (Use With 19h2284), Part Missing In Wise; 3/8" (132", -68***74; 154", -68***09), Part Missing In Wise; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Part Missing In Wise; 3/8", (Or), Part Missing In Wise; 3/8", (Use With 19h3219), Part Missing In Wise; 9.525 mm (3/8"), Part Missing In Wise; 3/8", (Rs, Ru, Rus, Ut, Or), Part Missing In Wise; 3/8" (Use With At24256 Or At31394), Part Missing In Wise; 3/8" (No Longer Required), Part Missing In Wise; 3/8", For 915, Part Missing In Wise; 3/8" (For 19h2676, 19h1648), Part Missing In Wise; 3/8", (Adjustable Rear Axle), Part Missing In Wise; 3/8" (918 Rigid), Part Missing In Wise; (C: 42" Tire) 3/8", Part Missing In Wise; 3/8", (Use With R82180 Or R100676), Part Missing In Wise; 3/8", (Use With H108673), Part Missing In Wise; 3/8", (Not Req. With E55662), Part Missing In Wise; 3/8", (2 Used Single Selective Control) (4 Used Dual Selective Control), Part Missing In Wise; (Sub For R53668), Part Missing In Wise; 3/8", For 3.7 M (12') Size, Part Missing In Wise; 3/8" (For R57059), Part Missing In Wise; 3/8" (Nlr), Part Missing In Wise; (A: (-Xxxxxx)4755-01***03;4955-01***24) 3/8", Part Missing In Wise; 3/8" (Sgb), Part Missing In Wise; 3/8", (120 Used L.H.) (120 Used R.H.), Part Missing In Wise; 3/8" (Less Rockshaft), Part Missing In Wise; 3/8", (Use With H149504), Part Missing In Wise; 3/8", 2350, Part Missing In Wise; 3/8", (Code 2819), Part Missing In Wise; 3/8", (Cable), Part Missing In Wise; (A: Code 2501) (B: Code 2502) 3/8", Part Missing In Wise; 3/8", (Cab), Part Missing In Wise; 3/8" 918 (65***01-) 75 Used, Part Missing In Wise; 3/8", (1 Used L.H.) (1 Used R.H.), Part Missing In Wise; (Lu) (Orchard Fenders), Part Missing In Wise; 3/8", (Dn-02), Part Missing In Wise; 3/8" (Sub For (2) Mg80680), Part Missing In Wise; 3/8" (Use With R53396), Part Missing In Wise; 3/8", (Not Req. W/E55662), Part Missing In Wise; Ar, 3/8", Part Missing In Wise; 3/8", (Code 2111 And 3904), Part Missing In Wise; 3/8", (Use With Am124305 Front Frame), Part Missing In Wise; 3/8" (Code 4101), Part Missing In Wise; 3/8" (Level Land), Part Missing In Wise; 3/8" 3/8", Part Missing In Wise; (A: Mexico) (B: Turkey) 3/8", Part Missing In Wise, Part Missing In Wise; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8" (No Longer Required With R41041), Part Missing In Wise; 3/8", (Sub For T12634), Part Missing In Wise; 3/8", (Lp-Gas), Part Missing In Wise; 3/8", Used With Steel Moldboard, Part Missing In Wise; 3/8" Nla, Part Missing In Wise; 3/8", For 600 And 610, Part Missing In Wise; (B: Engine Serial No.) 3/8", Part Missing In Wise; (B: Radar Bracket To Transmission Sump Line Shield Bracket Screw) 3/8", Part Missing In Wise; 3/8", (A), Part Missing In Wise; (A) 3/8", Mechanical Front Wheel Drive, Part Missing In Wise; 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Part Missing In Wise; 3/8", Ar, Part Missing In Wise; (B: (Xxxxxx-) Esn 4650-32***15; 4850-32***46) 3/8", Part Missing In Wise; (A: From Sr.No. 5038d(00***62-)) 3/8", Part Missing In Wise; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Part Missing In Wise; (A: From Sr.No.5103s/5203-12***72, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Part Missing In Wise; 3/8" (Sgb) Nlr, Part Missing In Wise; (A: Power Shift Transmission) 3/8", Part Missing In Wise; 3/8", (Sub K40003, This Application Only), Part Missing In Wise; (A: W/O Sound-Gard Body) 3/8", Part Missing In Wise; (K) 3/8", Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 24" X 8" X 14" 20pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8" (Flexible), Part Missing In Wise; (B: (Xxxxxx-) 4560-00***21; 4760-00***79; 4960-00***06) 3/8", Part Missing In Wise; 3/8", (Sub For R53668), Part Missing In Wise; (A) (B) 3/8", Part Missing In Wise; 3/8", Internal Tooth, Part Missing In Wise; 3/8", (Ea-G, Ge-01), Part Missing In Wise; 3/8" (Use With Delco-Remy), Part Missing In Wise; 3/8", Code 2314 (Af Only), Part Missing In Wise; 3/8" (4 Used, Rh; 5 Used, Lh), Part Missing In Wise; (A: Use With Ar87205) 3/8", Part Missing In Wise; 3/8", (Use With 14h1076 And 19h3239), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***13; 8650-00***23) 3/8", Part Missing In Wise; 3/8", For Spike-Tooth Sections, Part Missing In Wise; 3/8" (W/O Sgb), Part Missing In Wise; 3/8", (Use With 19h3239), Part Missing In Wise; (C: 3 Used Triple, 4 Used Quad) 3/8", Part Missing In Wise; 3/8" (Use With Re61087), Lock Washer; 3/8", (Use With R125195), Part Missing In Wise; X, Part Missing In Wise; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Part Missing In Wise; 3/8", (Use With Re33058), Part Missing In Wise; 3/8", (Nlr), Part Missing In Wise; (A: For Steel Moldboard) 3/8", Part Missing In Wise; (A: W/O Sgb) 3/8", Part Missing In Wise; 3/8", (Less Power Steering), Part Missing In Wise; 3/8", (Use With R59409 Or R81072), Part Missing In Wise; 3/8", For 4.6 M (15') Size, Part Missing In Wise; 3/8" (Sub T56055), Part Missing In Wise; (A: For Switzerland Only) 3/8", Part Missing In Wise; 3/8", (Mower Bar Only), Part Missing In Wise; (A) (B) (C) (D) 3/8", Part Missing In Wise; (Orchard Fenders), Part Missing In Wise; (A: (-Xxxxxx) 4650-01***77; 4850-01***15) 3/8", Lock Washer; 9.525 mm (3/8"), Part Missing In Wise; 3/8", 1350, Part Missing In Wise; 3/8", (Use With 19h2104 And 19h2855), Part Missing In Wise; 3/8", (Code 3903), Part Missing In Wise; 3/8", For 400, Part Missing In Wise; 3/8" To Secure Battery Cables To Frame, Part Missing In Wise; 3/8", For 15'3" Harrow, Part Missing In Wise; 3/8" (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; 3/8" (A), Part Missing In Wise; 3/8" (Use With 19h3239), Part Missing In Wise; 3/8", Terminal, Part Missing In Wise; 3/8" (Not Required W/E55662), Part Missing In Wise; 3/8", For 3179dl001, Part Missing In Wise; (A) 3/8", Part Missing In Wise; 3/8" (Use With H149504), Part Missing In Wise; 3/8" (Sub For R53668), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***53; 8650-00***74) 3/8", Part Missing In Wise; (A: (-Xxxxxx) Esn 4650-32***14; 4850-32***45) 3/8", Part Missing In Wise; 3/8", (750), Lock Washer; 3/8", (Sub For Ffsb107931), Part Missing In Wise; 3/8", (Use With R81911) Code 2501 And 2503, Part Missing In Wise; 3/8" (34 Harvester), Part Missing In Wise; (A: Contained In Ar94567) 3/8", Part Missing In Wise; (A: 5045d(00***75-), 5055d(00***19-), 5045e(00***74-), 5055e(00***75-), 5065e(00***02-), 5075e(00***21-)) 3/8", Part Missing In Wise; 3/8", For 810, Part Missing In Wise; (F: Used With Steel Moldboard) 3/8", Part Missing In Wise; 3/8", (13 Used, Rc And St) (11 Used, Ru And Or), Part Missing In Wise; 3/8", For 10' Harrow, Part Missing In Wise; (Use With 19h2284), Part Missing In Wise; 3/8", (St), Part Missing In Wise; 3/8", (Use With Ar77343), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8" (Nlr), Part Missing In Wise; 3/8" (For 19h3267), Part Missing In Wise; (A) 3/8", (No Longer Available), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8", Used With Fiber Glass Seed Hopper, Part Missing In Wise; 9.525 mm (3/8") (Use With 19h1936), Part Missing In Wise; 3/8", (Rc, Ru, Rus), Part Missing In Wise; 3/8", (Not Required With 19h1936), Part Missing In Wise; 3/8", (2 Used, Variable Drive; 4 Used, Long), Part Missing In Wise; 3/8", (Code 6205), Part Missing In Wise; (A: (-Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) (Use With 19h3219), Part Missing In Wise; 3/8", (Use With R125586), Part Missing In Wise; 3/8" (Pst), Part Missing In Wise; 3/8", Used On Beet Planter, Part Missing In Wise; (B: 24 And 224 Balers) 3/8", Part Missing In Wise; (E) 9.525 mm (3/8"), Part Missing In Wise; 3/8" (A), (B), Lock Washer; 3/8", (Use With 19h3239), Part Missing In Wise; 3/8", (Sub R44302), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Part Missing In Wise; 3/8", (Not Longer Required), Part Missing In Wise; (No Longer Required), Part Missing In Wise; 3/8", (Use With 24h1303), Part Missing In Wise; 3/8" Lh, Part Missing In Wise; 3/8", (Use With R59409), Part Missing In Wise; 9.525 mm, Part Missing In Wise; 3/8", (Sub K40003, This Application), Part Missing In Wise; 3/8", (2 Used Single) (4 Used Dual), Part Missing In Wise; 3/8" Battery Terminal (1 Used Single Battery) (2 Used Dual Battery) (Use With Ar66424), Part Missing In Wise; 3/8", (Use With A24646 Or A24647 And A24651), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8" (Nlr), Part Missing In Wise; 3/8" (Not Req. With E55662), Part Missing In Wise; 3/8", (Mower Bar), Part Missing In Wise; 3/8", (Cornhead Attachment), Part Missing In Wise; 3/8", (Ru, Rc), Part Missing In Wise; (Sub F16202), Part Missing In Wise; 3/8", 28-Inch Rows, Part Missing In Wise; (A: Engine Serial No.) 3/8", Part Missing In Wise; (C), Part Missing In Wise; 3/8", (Code 1701, 1702 And 1703), Part Missing In Wise; 3/8", Code 3905, Part Missing In Wise; 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Use With Ar11116), Part Missing In Wise; 3/8" (Rg), Part Missing In Wise; 3/8" (8 Used Dual) (12 Used Triple), Part Missing In Wise; 3/8", (No Longer Required With R41041), Part Missing In Wise; (B) 3/8", Part Missing In Wise; 3/8" (Qrt), Part Missing In Wise; 3/8", (Use With R114130, 14h812 And 19h3219), Part Missing In Wise; 3/8" (Not Required), Part Missing In Wise; 3/8", (Code 2108), Part Missing In Wise; 3/8" (D), Part Missing In Wise; 3/8" (No Longer Required, This Application), Part Missing In Wise; 3/8", (Motorola), Part Missing In Wise; 3/8" (Nla), Part Missing In Wise; 5/16", Part Missing In Wise; 3/8", (No Longer Required), Part Missing In Wise; 3/8", (Code 2101, 2102, Or 2109), Part Missing In Wise; 3/8" (Fan To R100682, R100676, R90561 Or R82180) Code 2314 (Af Only), Part Missing In Wise; 3/8", (Use With 14h1076), Part Missing In Wise; 3/8", (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Use With Ar55094), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8", Part Missing In Wise; (A: From Sr. No. 5103s-00***91, 5203-00***82, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; (B) 3/8", (Sub For R1870r), Part Missing In Wise; (C: Carbon Brush Conductor) 3/8", Part Missing In Wise; 3/8", For Gauge Shoe, Part Missing In Wise; 3/8", For R128566, R131753, Part Missing In Wise; 3/8", (Ea-D, Ea-G, Ha-G, De-01, Ge-01), Part Missing In Wise; (C: 5303 (-00***07), 5403 (-00***42).) 3/8", Part Missing In Wise; 3/8", (Use With 19h2676), Part Missing In Wise; 3/8", Fertilizer Opener, Part Missing In Wise; No 10, Part Missing In Wise; (A: From Sr.No. 5103s(01***67-), 5104(01***62-), 5204(00***15-)) 3/8", Part Missing In Wise; (A) (C) 3/8", Part Missing In Wise; X X X 3/8", Part Missing In Wise; 3/8", (Delco-Remy), Part Missing In Wise; (Code 1709), Part Missing In Wise; 3/8", (Use With Ar87024 Or Ar87023), Part Missing In Wise; 3/8", 4020 Or 4010 Tractor, Part Missing In Wise; (A) (B) 9.525 mm (3/8"), Part Missing In Wise; 3/8", (To Clip), Part Missing In Wise; 3/8", 2 Or 4 Used, Part Missing In Wise; 3/8", (Used With Victor Valve), Part Missing In Wise; 3/8", (Row-Crop), Part Missing In Wise; 3/8", (Use With Re19265), Part Missing In Wise; 3/8", For B27852 Only, Part Missing In Wise; 3/8" Low, Part Missing In Wise; 3/8" (A) (B), Part Missing In Wise; 3/8", (1 Used Single Selective Control) (2 Used Dual Selective Control), Part Missing In Wise; 3/8", (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; (A), Part Missing In Wise; 3/8", (Code 7001, 7002, 7003, And 7004), Part Missing In Wise; 3/8", Code 2311(Af, Af001), Part Missing In Wise; 3/8", (4 Used, Variable Drive; 6 Used, Long), Part Missing In Wise; 3/8", External Tooth, No. 10, Part Missing In Wise; 3/8" Ar, Part Missing In Wise; 3/8", (A), (D), Part Missing In Wise; (C) 3/8", Part Missing In Wise; 3/8", Part Missing In Wise; 3/8", 8650 Tractor, Part Missing In Wise; 3/8", (31 Used, 6'; 43 Used, 8'), Part Missing In Wise; 3/8", (Use With Ar36849), Part Missing In Wise; 3/8", (Regular), Part Missing In Wise; 3/8" (Use With R191204), Part Missing In Wise; (A: Assembly Listed Below Contains All Parts Identified By (A):) 3/8" (Use With R59409), Part Missing In Wise; 3/8", (No Longer Available), Part Missing In Wise; (A: Quad-Range Transmission) 3/8", Part Missing In Wise; 3/8", (Afd - No Longer Required), Part Missing In Wise; (E) 3/8", (Use With Ar66424), Part Missing In Wise; 3/8", Code 3907, Part Missing In Wise; 3/8" 3\8", Part Missing In Wise; 3/8", (Code 4101), Part Missing In Wise; 3/8" (Not Required W/E55662 Or 14h1090), Part Missing In Wise; (D) 3/8", Part Missing In Wise; 3/8" ((1) Per Spare Shear Bolt), Part Missing In Wise; 3/8" (6620 Sidehill), Part Missing In Wise; (A) 3/8", Outer, Part Missing In Wise; 3/8", 28" Rows Only, Part Missing In Wise; 3/8", For 6-Tooth Section, Part Missing In Wise; 3/8", 4010 Or 4020 Tractor, Part Missing In Wise; 3/8", (Saran Cd), Part Missing In Wise; 3/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Part Missing In Wise; 3/8", (Sub T56055), Part Missing In Wise; (A: No Longer Required) 3/8", Part Missing In Wise; 3/8", (18 Used Steel Pan) (21 Used Cast Iron Pan), Part Missing In Wise; 3/8", (6401), Part Missing In Wise; 3/8", (Not Required), Part Missing In Wise; 3/8", (Use With Ar66424 Or At25619), Part Missing In Wise; 3/8", (Not Req W/ E55662), Part Missing In Wise; (A) (B) (D) (E) 3/8", Part Missing In Wise; 3/8", (650), Part Missing In Wise; 3/8", (K1) (K2), Part Missing In Wise; 3/8" (Use With Motorola), Part Missing In Wise; 3/8", No. 20 Hitch, Part Missing In Wise; 3/8" (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Or, Rs, Rus, Ut), Part Missing In Wise; Internal-Tooth, No. 10, Part Missing In Wise; 3/8" (Use With Ae24403), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662), Part Missing In Wise; 3/8", (16 Used, 6'; 24 Used, 8'), Part Missing In Wise; 3/8", Code 2311 (Tf) (Pulley To Fan Spacer)2
14***12Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00***66; 7700-00***74; 7800-01***11) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-00***98; 7400-00***38) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-00***66; 7700-00***74; 7800-01***11) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65***01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 36 Hydraulic Cylinder : Variable Ground Drive Cylinder [01f02]
11***14Cotter Pin; 3,2 X 22mm, Cotter Pin, Cotter Pin; 3x25mm, Cotter Pin; (A) 3,2x22mm, Cotter Pin; 3,2x22mm, Cotter Pin; 3.200 X 22mm, Cotter Pin; 3,2 X 22 mm, Cotter Pin; 3.200 X 22 mm, Cotter Pin; 3x22mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; 3 2x22mm, Cotter Pin; 3 X 25 mm, Cotter Pin; M3 X 25, Cotter Pin; 3,2x25mm2
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm1
14***26Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2"1
See all parts with full part numbers in Heavy Parts AI →
37 Steering Pump
John Deere : 940 - Combine : 37 Steering Pump : "Ross" Steering Pump Complete With Steering Shaft [01f10]
AZ***28Hydraulic Hose4
AZ***61Steering Control Uni; (A) Assembly, Incl Keys 2-101
AZ***96Drag Link; Ross 08***42-2650, Drag Link1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 37 Steering Pump : Individual Parts For "Danfoss" Steering [01f16]
AL***89Thrust Bearing; Kit (Sub For Az20006, Z31351, Z31352), Thrust Bearing; (Sub For Az20006, Z31351, Z31352), Thrust Bearing1
AZ***03Seal Kit, Seal Kit; (Sub For Z31452, Z31455), Seal Kit; Kit, Incl Keys 15,19,21-24, Seal Kit; Kit, Seal Kit; Kit, Incl Keys 19,21-24,291
AZ***05Steering Metering Pu1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 37 Steering Pump : Individual Parts For "Ross" Steering [01f12]
AH***68Kit; Seal Repair, Kit; Seal Kit, Kit; Kit, Incl Keys 32-35,37 (Sub For Az20001), Kit; Kit, Incl Keys 32-35,37 (Ord Az20001), Kit; Seal Repair, (Sub For Ah63102), Kit; Kit, Incl Keys 2,4-71
AZ***88Shaft; Ross 40***60-A1 506, Shaft1
AZ***89Needle Bearing, Needle Bearing; Ross 06***791
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 37 Steering Pump : M E M O R A N D A [01f18]
John Deere : 940 - Combine : 37 Steering Pump : Steering Shaft (Danfoss) [01f14]
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm4
14***09Nut; M18 (Sub For Er022183 Appl), Nut; (A: With Air Trailer Brake System) M18, Nut; (A: (6068hn053)) M18, Nut; (B: W/ Air Brake) M18, Nut; (B: Syncshuttle Transmission - 5420: Sn -44***59, 5520: Sn -45***00) M18, Nut; (A: 5105: Sn -41***94 5205: Sn -42***97) M18, Nut; (B) M18 X 1,5, Danfoss Otb750-15***42, Nut; (A: Collarshift Transmission - 5420: Sn 44***15-, 5520: Sn 45***05-) M18, Nut; (A: 5303 (Xxxxxx-), 5403 (Xxxxxx-).) M18, Nut; (A: With Turbocharger) M18, Nut; (A: Syncshuttle Transmission - 5420: Sn 44***60-, 5520: Sn 45***01-) M18, Nut; M18 (A), Nut; 18mm, Nut; M18 (Inc. In Re42491), Nut; (A: Collarshift Transmission - 5420: Sn -44***14, 5520: Sn -45***04) M18, Nut; M18 X 1,5, W/ Danfoss Otb 750-15***42, Nut; M8 X 1,5, Nut; (A), Nut; (A: With Air Trailer Brake System), Nut; (A: 5303 (-Xxxxxx), 5403 (-00***75).) M18, Nut; (A: (6068hn056)) M18, Nut; M18x1,5, Nut, Nut; (A: Collarshift Transmission - 5220: Sn 42***11-, 5320: Sn 43***09-) M18, Nut; M18 Thin, Nut; M18x1.5, Nut; (W Danfoss Otb 750-15***42) M18 X 1,5, Nut; M18 (Sub For Er021183 Appl), Nut; M18 X 1,5, Nut; (A: 5105: Sn 41***95- 5205: Sn 42***98-) M18, Nut; (A: 9550 (69***01-) 9550sh (69***01-)) M18, Nut; M18 (Sub For Er022183, Appl), Nut; M18, Nut; M18x1 5, Nut; M18 X 1.5, Nut; M18 M18, Nut; (A: Collarshift Transmission - 5220: Sn -42***10, 5320: Sn -43***08) M18, Nut; (B) M18 X 1,5, Nut; M18x1,5 (W/ Danfoss Otb750-15***42), Nut; (C: For 9650 (69***01-) & 9750 (69***01-)) M18, Nut; (A: Used In 5725hc Tractor Too) M18, Nut; 18x1,5mm1
19***00Cap Screw; 3/8" X 1-1/2", (Used With Victor Valve), Cap Screw; (D) 3/8" X 1-1/2", Cap Screw; (B) (C) 3/8" X 1-1/2", Cap Screw; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2", 200 Per Package, (Sub For Mg88044), Cap Screw; (A) 3/8"X1-1/2", Cap Screw; (A: ( -Xxxxxx) Esn 4650-32***14; 4850-32***45) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2", (Long Tongue), Cap Screw; 3/8" X 1-1/2" (Use With N189996), Cap Screw; 3/8" X 1-1/2", (Use With K40003), Cap Screw, Cap Screw; 3/8" X 1-1/2" Use Without Rear Conditioner, Cap Screw; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Cap Screw; 3/8" X 1-1/2" (Use With N164596), Cap Screw; (B: Power Shift Transmission) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2", (1 Used Gasoline) (2 Used Diesel), Cap Screw; 3/8" X 1-1/2", Code 2300 And 2301 (Af, Tf), Cap Screw; 3/8" X 1-1/2", (200 Per Package) (Sub For Mg88044), Cap Screw; 3/8" X 1-1/2" (Use With Ar70437 Or Re40280), Cap Screw; 3/8" X 1-1/2", 4020 Or 4010 Tractor, Cap Screw; 3/8"X1-1/4", Cap Screw; 3/8" X 1-1/2" (213, 215, And 216-3 Used; 218, 220, 222, 224, And 230-5 Used) (Rigid), Cap Screw; (Use With R28745) (3020*), Cap Screw; 3/8" X 1-1/2" (213, 215, And 216-3 Used; 218, 220, 222, 224, And 230-5 Used), Cap Screw; 3/8" X 1-1/2" (Use With N10215), Cap Screw; 3/8" X 1-1/2" (Also Order (5) At21191 And (2) At22919), Cap Screw; 3/18" X 1-1/2", Cap Screw; 3/8" X 1-1/2", 4010 Or 4020 Tractor, Cap Screw; 3/8" X 1-1/2", 730 Tractor, Cap Screw; 3/8" X 1-1/2", (5200), Cap Screw; 3/8" X 1-1/2" (Dh-04, Th-01), Cap Screw; 3/8" X 1-1/2" (Use With Bp12233), Cap Screw; (A: 75cc) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2" (Rigid) (913 And 915 3-Used; 918, 920, 922, 924, 925 And 930 5-Used), Cap Screw; 3/8" X 1-1/2", (Rs, Ru, Rus, Ut, Or), Cap Screw; 3/8"X1-1/4" (Sub For L32504), Cap Screw; 3/8" X 1-1/2", (Code 6403), Cap Screw; 3/8" X 1-1/2", (Use With R89790), Cap Screw; 3/8" X 1-1/2", 23 Cm3 (1.38 In3) Pump, Cap Screw; 3/8" X 1-1/2" R.H. (Sub For R56014), Cap Screw; 3/8" X 1-1/2", (Use With Ar55094), Cap Screw; 3/8"X1-5/8", Cap Screw; (C) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2", (6359dn-01 Engine), Cap Screw; 3/8" X 1-1/2" Lh, Cap Screw; 3/8" X 1-1/2" Support To Hitch, Cap Screw; (5010), Cap Screw; 3/8"X1-3/4", Cap Screw; 3/8" X 1-1/2", (Code 4100 Or 4199), Cap Screw; 3/8" X 1-1/2, Cap Screw; 3/8"X1"-1/2", Cap Screw; (A: Install In 1 Select. Control Valve) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2" (Sub For 19h2545), Cap Screw; (B) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2", (Vickers 19***09), Cap Screw; 3/8" X 1-1/2", Cap Screw; (B: For 75cc Hydrostatic Pump) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2", (47-Foot Boom), Cap Screw; 3/8" X 1-1/2", (Sub For Hmx19008), Cap Screw; 3/8" X 1-1/2", Full Thread, Cap Screw; (A)(B)(C) 3/8" X 1-1/2", Cap Screw; 9/8"X1"-1/2", Cap Screw; 3/8" X 1-1/2", 4n, Cap Screw; 3/8" X 1-1/2" (Use With 12h304 And 14h812), Cap Screw; 3/8" X 1-1/2" (8 Used, 12'; 12 Used, 20'), Cap Screw; (A: Quad-Range Transmission) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2", 23 Cm3 (1.38 In3), Cap Screw; 3/8" X 1-1/2", (Upper), Cap Screw; 3/8" X 1-1/2", 5440 Model Only, Cap Screw; 3/8" X 1-1/2", (Nr), Cap Screw; (A) 3/8" X 1-1/2", Cap Screw; 3/8"X1-1/2" (Ord 19h1731), Cap Screw; 3/8" X 1-1/2", (Code 1601 And 1610), Cap Screw; (B) 3/8"X1-1/2", Cap Screw; 9.525 X 38.100 mm (3/8" X 1-1/2"), Cap Screw; 3/8" X 1-1/2" (Use With Ar70834 And Ar72127), Cap Screw; 3/8" X 1-1/2" (Sgb), Cap Screw; 3/8" X 1-1/2", Code 2314 (Af Only), Cap Screw; 3/8" X 1-1/2" 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2", (Long), Cap Screw; 3/8" X 1-111/2", Cap Screw; 3/8" X 1-1/2" (Use With 14h812), Cap Screw; (W/ L32670), Cap Screw; 3/8" X 1-1/2", (2 Used Gasoline) (1 Used Diesel), Cap Screw; 9.525 X 38.100 mm (3/8" X 1-1/2"), Cap Screw; (A: For 55 & 60 Series Tractors W/E-H Hitch) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2" (Use With H95175), Cap Screw; (Use With R28745) (3020e), Cap Screw; 3/8" X 1-1/2" (Sub For 12h304 And 14h812), Cap Screw; 3/8" X 1-1/2" (4 Used, 18'; 6 Used, 20'), Cap Screw; 3/8" X 1-1/2" (3010), Cap Screw; 3/8" X 1-1/2", N.L.A., Cap Screw; 3/8" X 1-1/2", L.H., Cap Screw; 3/8" X 1-1/2", (Use With Ar70437 Or Re40280), Cap Screw; 3/8" X 1-1/2", Gasoline, Cap Screw; 3/8" X 1-1/2", (Code 1319), Cap Screw; 3/8" X 1-1/2" (200 Per Package) (Sub For Mg88044), Cap Screw; 3/8"X1-1/2", Cap Screw; 3/8" X 1-1/2", (Ru And Or), Cap Screw; 3/8" X 1-1/2" (6359), Cap Screw; (A) 9.525 X 38.100 mm (3/8" X 1-1/2"), Cap Screw; 3/8" X 1-1/2", (Use With N164596), Cap Screw; 3/8" X 1-1/2", Used With Cast Housing, Cap Screw; 3/8" X 1-1/2", (Rc, St And Ru), Cap Screw; 3/8" X 1-1/2", (Power Shift), Cap Screw; 3/8" X 1-1/2", 23 Cm3 (1.38 In.3) Pump, Cap Screw; (A: Engine Serial No.) 3/8" X 1-1/2", Cap Screw; (A) (B) (C) 3/8" X 1-1/2", Cap Screw; 3/8" X 1-1/2", (Short Tongue), Cap Screw; 3/8"X1/2"4
See all parts with full part numbers in Heavy Parts AI →
38 Hydraulic Lines
John Deere : 940 - Combine : 38 Hydraulic Lines : Brake System [01f24]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm1
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M61
19***86Cap Screw; M6 X 25, (Sub For Ffsb108287 And J900625), Bolt, Bolt; M6 X 25 (10.9), Bolt; M6 X 25 (1770-12rw, 16r And 24r), Bolt; (D: Components Of Item Dq73362) M6 X 25, Bolt; M6 X 25 (Sub For J260625 ) (Also Order 24m7054), Bolt; 12x25mm, Bolt; (B: (Xxxxxx- ) 8570-00***56; 8770-00***78; 8870-00***89) M6 X 25, Bolt; 6 X 25 mm, Bolt; M6 X 25 Sub For J020625, Bolt; (C: (Xxxxxx- )7200-00***68;7400-00***41) M6 X 25, Bolt; (A: ( -Xxxxxx) 7600-00***91; 7700-01***55; 7800-01***23) M6 X 25, Bolt; M6x25, Bolt; M6 X 25 (Sub For 19m7286), Bolt; M6 X 25 Sub For J900625, Bolt; 6x25mm, Bolt; (A) (C) M6x25, Bolt; (C: (Xxxxxx- ) 8100-00***42; 8200-00***95; 8300-00***60; 8400-00***59) M6 X 25, Bolt; M6 X 25 Use With R312762, Bolt; (C: (Xxxxxx- ) 7600-00***37; 7700-00***17; 7800-01***22) M6 X 25, Bolt; M6 X 25 (Sub For R267251 Appl), Bolt; M6 X 25 |, Bolt; (A) M6 X 25, Bolt; (A: ( -Xxxxxx) 7200-00***05; 7400-00***12) M6 X 25, Bolt; M6 X 25 Lh, Bolt; (C: With Autopowr Transmission) M6 X 25, Bolt; (B) M6 X 25, Bolt; (A) M6x25, Bolt; (A) (C) M6 X 25, Bolt; ((C)) M6 X 25, Bolt; (A: With Syncroplus Transmission) M6 X 25, Bolt; M6 X 25 (Sub For Er020751 Appl), Bolt; (C: With Jd Ivt Transmission) M6 X 25, Bolt; M6 X 25 (Use With R312762), Bolt; (B) M6x25, Bolt; (B: With Rops) M6 X 25 (Sub For Er020751 Appl), Bolt; (B) (C) M6x25, Bolt; (B: Basic Version) M6 X 25, Bolt; M6 X 25 M6x25, Bolt; M6 X 25, Bolt; M6 X 25, M6x25, Bolt; M6 X 25 M6 X 25, Bolt; M6 X 25, (312), Bolt; M6 X 25 (Use With Re49783), Bolt; M6 X 25 (A)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 38 Hydraulic Lines : Hydraulic Lines, Front [01g11]
AZ***75Elbow Fitting; Incl Keys 14,15, Elbow Fitting; Incl Keys 3,4, Elbow Fitting, Elbow Fitting; Incl Keys 14,15 (Sub For Az21276), Elbow Fitting; Incl Keys 3,4 (Sub For Az21276)1
AZ***76Elbow Fitting; Incl Keys 8,9 (Sub For Az21277), Elbow Fitting; Incl Keys 8,9, Elbow Fitting, Elbow Fitting; Incl Keys 20,21 (Sub For Az21277), Elbow Fitting; Incl Keys 20,211
AZ***83Oil Line; Incl Keys 14,15, Oil Line; Incl Keys 3,4, Oil Line; Incl Keys 3,4 (Sub For Az19283)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 38 Hydraulic Lines : Hydraulic Lines, Platform Lift Cylinders [01g09]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm7
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M67
19***86Cap Screw; M6 X 25, (Sub For Ffsb108287 And J900625), Bolt, Bolt; M6 X 25 (10.9), Bolt; M6 X 25 (1770-12rw, 16r And 24r), Bolt; (D: Components Of Item Dq73362) M6 X 25, Bolt; M6 X 25 (Sub For J260625 ) (Also Order 24m7054), Bolt; 12x25mm, Bolt; (B: (Xxxxxx- ) 8570-00***56; 8770-00***78; 8870-00***89) M6 X 25, Bolt; 6 X 25 mm, Bolt; M6 X 25 Sub For J020625, Bolt; (C: (Xxxxxx- )7200-00***68;7400-00***41) M6 X 25, Bolt; (A: ( -Xxxxxx) 7600-00***91; 7700-01***55; 7800-01***23) M6 X 25, Bolt; M6x25, Bolt; M6 X 25 (Sub For 19m7286), Bolt; M6 X 25 Sub For J900625, Bolt; 6x25mm, Bolt; (A) (C) M6x25, Bolt; (C: (Xxxxxx- ) 8100-00***42; 8200-00***95; 8300-00***60; 8400-00***59) M6 X 25, Bolt; M6 X 25 Use With R312762, Bolt; (C: (Xxxxxx- ) 7600-00***37; 7700-00***17; 7800-01***22) M6 X 25, Bolt; M6 X 25 (Sub For R267251 Appl), Bolt; M6 X 25 |, Bolt; (A) M6 X 25, Bolt; (A: ( -Xxxxxx) 7200-00***05; 7400-00***12) M6 X 25, Bolt; M6 X 25 Lh, Bolt; (C: With Autopowr Transmission) M6 X 25, Bolt; (B) M6 X 25, Bolt; (A) M6x25, Bolt; (A) (C) M6 X 25, Bolt; ((C)) M6 X 25, Bolt; (A: With Syncroplus Transmission) M6 X 25, Bolt; M6 X 25 (Sub For Er020751 Appl), Bolt; (C: With Jd Ivt Transmission) M6 X 25, Bolt; M6 X 25 (Use With R312762), Bolt; (B) M6x25, Bolt; (B: With Rops) M6 X 25 (Sub For Er020751 Appl), Bolt; (B) (C) M6x25, Bolt; (B: Basic Version) M6 X 25, Bolt; M6 X 25 M6x25, Bolt; M6 X 25, Bolt; M6 X 25, M6x25, Bolt; M6 X 25 M6 X 25, Bolt; M6 X 25, (312), Bolt; M6 X 25 (Use With Re49783), Bolt; M6 X 25 (A)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 38 Hydraulic Lines : Hydraulic Lines,Pump To Selective Control Valve [01g03]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm3
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M63
19***68Bolt; (C: (-Xxxxxx) Tractor Serial No. 8560-00***00; 8760-00***00; 8960-00***00) M10 X 30, Bolt; M10 X 30 (A), (B), Bolt; M10 X 30, Bolt; M10 X 30 M10 X 30, Bolt; M10 X 30 Rh Drop-Down, Bolt, Bolt; M10 X 30 M10x30, Bolt; M10 X 30 (A), (B), (Sub For Ch17135), Bolt; M10 X 30, (Sub For Mg508076), Bolt; 10x30mm, Bolt; Ar, M10 X 30, Bolt; (A: With Creeper Transmission) M10 X 30, Cap Screw; M10 X 30, Bolt; M10 X 30 (Sub For 19m7100), Bolt; (A) (B) M10 X 30, (Sub For Ch17135), Bolt; M10, Bolt; 10x80mm, Bolt; (A: R.H. Drop-Down) M10 X 30, Bolt; (D: (Xxx-) 8560-00***01;8760-00***01;8960-00***01) M10 X 30, Bolt; (D: With Long Feeder House) M10 X 30, Bolt; M10 X 30 (8.8), Bolt; (A: Mechanical Front Wheel Drive) M10 X 30, Bolt; (C: Starting From Series Number 2109 (07***01-), 2111 (06***01-), 2113 (06***04-), 2115 (06***02-)) (D: Starting From Series Number 2117 (06***02-), 2122 (06***01-), 2126 (06***06-)) M10 X 30 2130, Bolt; (A: 7220 (01***51-)) M10 X 30, Bolt; M10 X 30 (A) (B) (C), Bolt; M10 X 30 (Sub For 19m7102), Bolt; M10 X 30 L.H. Drop-Down, Bolt; (B: L.H. Drop-Down) M10 X 30, Bolt; M10 X 30 (930d-110 Used; 936d-120 Used), Bolt; M10x30, Cap Screw; M10 X 30, (Sub For T116882), Bolt; M10 X 30/28 (Sub For 19m7102), Bolt; (C) M10 X 30, Bolt; (A: W/ Cab) M10 X 30, Bolt; M10 X 30 M10, Bolt; M6x30, Bolt; (C: Up To Series 2111 (-13397), 2113 (-06***03), 2115 (-06***01)) (D: Up To Series 2117 (-06***01), 2122 (-13423), 2126 (-06***05)) M10 X 30, Bolt; M12x25, Bolt; M10 X 30, (312) M10x30, Bolt; M10 X 30, M10, Bolt; M10 X 30, Rh, Bolt; M10 X 30 (Use With At117390), Bolt; M10 X 30, Grade "8" Shear, Bolt; M10 X 30, R.H., Bolt; M10 X 30, (Use With At117390), Bolt; (A: For 7750) M10 X 30, Bolt; M10 X 30 (A), (Sub For Ch17135), Bolt; (A: For 7300, 7400, 7500) M10 X 30, Bolt; (Sub For Ch12028) (Df105), Bolt; M16 X 30, Bolt; M10 X 30 (A) (Sub For Ch17135), Bolt; M10 X 30 (A), Bolt; (A: (-Xxxxxx) 8560-00***42; 8760-00***18; 8960-00***60) M10 X 30, Bolt; (A: With Cab Only) M10 X 30, Bolt; (B: With Creeper Transmission) M10 X 30, Bolt; (B) M10 X 30, Bolt; 10 X 30mm, Bolt; M10x30 R.H., Bolt; (A: For 7350 7450, 7550) M10 X 30, Bolt; M10 X 30, L = 57 Incl Key 32, 33, Bolt; (A: Use Only With Electro-Hydraulic Power Take-Off) M10 X 30, Bolt; M10 X 30 Din933 (8.8) Zn, Bolt; (Use With At117390), Bolt; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) M10 X 30 (Hs, Head Marked 10.9), Bolt; M10 X 30, (Sub For Ch12028), Bolt; M10 X 30, (B), Bolt; M10x30mm, Bolt; M10 X 30 R.H. Drop-Down, Bolt; M10 X 30 Lh, Rh, Bolt; (A) M10 X 30, Bolt; (D: W/ Long Feeder House) M10 X 30, Bolt; M10 X 30 Rh, Bolt; (A: With Front Loader Only) M10 X 30, Bolt; M10 X 30/28 (Sub For 19m3146), Bolt; (A: No Longer Required) M10 X 30, Bolt; M10x30, Rh, Bolt; (A) (B) M10 X 30, Bolt; M10 X 30 Lh Drop-Down, Bolt; M10 X 30, 10mm, Bolt; M6 X 30, Bolt; M10 X 30 (A)(Sub For Ch17135), Bolt; M10 X 30, (6000 Series Only) (Used With 2.29 M (7.5 Ft) Harness), Bolt; M10 X 30, (Sub For Ch17135), Bolt; (Sub For Ch12028), Bolt; Ar, 10x30mm, Bolt; M10 X 30 (Sub For 17m7154), Bolt; M10 X 30 (Sub For 19m3146), Bolt; M10 X 30 Auxiliary Finger, Bolt; M10 X 30 (For 25' Euro), Bolt; (A) M10x30, Bolt; M10 X 30 (925d-72 Used; 930d-84 Used), Bolt; M10 X 30 (European), Bolt; M10 X 30, M10 X 30, Bolt; (A: Without R.H. Step) M10 X 30, Bolt; M10 X 30, M10x302
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 38 Hydraulic Lines : Hydraulic Lines,Pump To Selective Control Valve [01g05]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm5
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M65
19***77Screw; (C) M6 X 20 (Sub For 19m7862), Screw; M6 X 20 Sub For J020620, Screw, Screw; M6 X 20, (312), Screw; (B: (Xxxxxx-) 8560-00***04; 8760-00***52; 8960-00***15) M6 X 20, Screw; M6 X 20 M6x20, Cap Screw; M6 X 20, Cap Screw; (Sub For J020620), Screw; M6 X 20 (C), Screw; M6 X 20 (A), Screw; (A) M6x20, Screw; (A: From Sr.No. 5103s-01***62, 5203-00***62, 5104/5204/5038d-00***01.) M6 X 20, Screw; (C: United Kingdom, France, Germany And Sweden) M6 X 20, Screw; 6 X 20 mm, Screw; (B) M6 X 20, Screw; (Sub For J020620), Screw; M6 X 20 (Sub For 19m7862), Screw; M6 X 20 (A) (B), Screw; M6 X 20 (Sub For J090620), Screw; (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)) M6 X 20, Screw; M6 X 20, M6x20, Screw; 6x20mm, Cap Screw; M6 X 20, (Sub For Ffsb107149, Along With 24m7047 And 12m7067), Screw; (B: With Cab) M6 X 20, Screw; M6 X 20 (Sub For J020620), Screw; M6 X 20 Upper Left Hole, Screw; (A), Screw; M6 X 20 Sub For J900650, Screw; (A: With Air Trailer Brake System) M6 X 20, Screw; M6 X 20, Screw; M6 X 20 R.H. (Use With E131650), Screw; (A: Syncshuttle Transmission) (B: Collarshift Transmission) M6 X 20, Screw; (A: Syncshuttle Transmission) (B: Collarshift Transmission) M6 X 20, Screw; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M6 X 20, Screw; (A) M6 X 20, M6x20, Screw; M6 X 20 (Sub For J260620) (Also Order 24m7054), Screw; M6 X 20 9 X 19 X 1.5, Screw; M6 X 20 (Pst), Screw; M6 X 20 (Sub For 21m7285 Appl), Screw; (A: For Vineyard Tractor Version Only) M6 X 20, Screw; M6 X 20, 6mm, Screw; M6 X 20 (Use With T118880 And T118881), Screw; M6 X 20 Length), Screw; (A: (-Xxxxxx) 8560-00***90; 8760-00***99; 8960-00***96) M6 X 20, Screw; M6 X 20 (10.9), Screw; (A: W/ Straw Chopper) M6 X 20, Screw; M6x20, Screw; M6 X 20 Sub For J090620, Screw; M6 X 20, (Sub For T76066), Screw; M6 X 20 (650 Buck Auto Ex), Screw; M6 X 20, (4019df, Tf), Screw; (A: With Power Reverser) M6 X 20, Screw; M6 X 20, 1450/1550, Screw; M6 X 20, Ar, Cap Screw; M6 X 20, (Sub For J900620), Screw; (A: Used In High Clearance Tractors Too) M6 X 20, Screw; M6 X 20, (3011df, 3014df), Screw; (A) M6 X 20, Screw; Ar, M6x20, Screw; (A: Rice/Corn) M6 X 20, Screw; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M6 X 20, Screw; M6 X 20 9 mm X 19 mm X 1.5 mm, Cap Screw, Screw; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) M6 X 20, Screw; M6 X 20, (Code 1602), Screw; M6 X 20 Sub For J900620, Screw; M6 X 20 (Sub For 19m7077), Screw; M6 X 20 (A), (B), Screw; (A) (B) M6 X 20, Screw; M6 X20, Cap Screw; M6 X 20, (Sub For Ffsb107718), Screw; M6 X 20, M6 X 20, Screw; (A: From Sr.No.5103e-00***54, 5103-01***65, 5103s-01***62, 5203-00***62, 5104/5204-00***01, 5038d-00***01.) M6 X 20, Screw; M6 X 20 (Sub For 19m7560), Screw; M6 X 20 M6x20 (Sub For 21m7285 Appl), Screw; M6 X 20, (Use With Auxiliary Valve), Screw; (A: Export Version (4x2 Sn 00***00-) (6x4 Sn 01***46-)) M6 X 20, Screw; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M6 X 20, Screw; (A: Use With Al160390) M6 X 20, Screw; M6 X 20 (Sub For (1) J900620)(J260620 Nla), Screw; M6 X 20 (Sub For J900620), Screw; M6 X 20 (2 Used With Endgate, 3 Used Without Endgate), Screw; (A: United Kingdom, France, Germany And Sweden) M6 X 20, Screw; (B) M6x201
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 38 Hydraulic Lines : Hydraulic-Lines (Cutting Platform) [01f22]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm6
19***77Screw; (C) M6 X 20 (Sub For 19m7862), Screw; M6 X 20 Sub For J020620, Screw, Screw; M6 X 20, (312), Screw; (B: (Xxxxxx-) 8560-00***04; 8760-00***52; 8960-00***15) M6 X 20, Screw; M6 X 20 M6x20, Cap Screw; M6 X 20, Cap Screw; (Sub For J020620), Screw; M6 X 20 (C), Screw; M6 X 20 (A), Screw; (A) M6x20, Screw; (A: From Sr.No. 5103s-01***62, 5203-00***62, 5104/5204/5038d-00***01.) M6 X 20, Screw; (C: United Kingdom, France, Germany And Sweden) M6 X 20, Screw; 6 X 20 mm, Screw; (B) M6 X 20, Screw; (Sub For J020620), Screw; M6 X 20 (Sub For 19m7862), Screw; M6 X 20 (A) (B), Screw; M6 X 20 (Sub For J090620), Screw; (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)) M6 X 20, Screw; M6 X 20, M6x20, Screw; 6x20mm, Cap Screw; M6 X 20, (Sub For Ffsb107149, Along With 24m7047 And 12m7067), Screw; (B: With Cab) M6 X 20, Screw; M6 X 20 (Sub For J020620), Screw; M6 X 20 Upper Left Hole, Screw; (A), Screw; M6 X 20 Sub For J900650, Screw; (A: With Air Trailer Brake System) M6 X 20, Screw; M6 X 20, Screw; M6 X 20 R.H. (Use With E131650), Screw; (A: Syncshuttle Transmission) (B: Collarshift Transmission) M6 X 20, Screw; (A: Syncshuttle Transmission) (B: Collarshift Transmission) M6 X 20, Screw; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M6 X 20, Screw; (A) M6 X 20, M6x20, Screw; M6 X 20 (Sub For J260620) (Also Order 24m7054), Screw; M6 X 20 9 X 19 X 1.5, Screw; M6 X 20 (Pst), Screw; M6 X 20 (Sub For 21m7285 Appl), Screw; (A: For Vineyard Tractor Version Only) M6 X 20, Screw; M6 X 20, 6mm, Screw; M6 X 20 (Use With T118880 And T118881), Screw; M6 X 20 Length), Screw; (A: (-Xxxxxx) 8560-00***90; 8760-00***99; 8960-00***96) M6 X 20, Screw; M6 X 20 (10.9), Screw; (A: W/ Straw Chopper) M6 X 20, Screw; M6x20, Screw; M6 X 20 Sub For J090620, Screw; M6 X 20, (Sub For T76066), Screw; M6 X 20 (650 Buck Auto Ex), Screw; M6 X 20, (4019df, Tf), Screw; (A: With Power Reverser) M6 X 20, Screw; M6 X 20, 1450/1550, Screw; M6 X 20, Ar, Cap Screw; M6 X 20, (Sub For J900620), Screw; (A: Used In High Clearance Tractors Too) M6 X 20, Screw; M6 X 20, (3011df, 3014df), Screw; (A) M6 X 20, Screw; Ar, M6x20, Screw; (A: Rice/Corn) M6 X 20, Screw; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M6 X 20, Screw; M6 X 20 9 mm X 19 mm X 1.5 mm, Cap Screw, Screw; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) M6 X 20, Screw; M6 X 20, (Code 1602), Screw; M6 X 20 Sub For J900620, Screw; M6 X 20 (Sub For 19m7077), Screw; M6 X 20 (A), (B), Screw; (A) (B) M6 X 20, Screw; M6 X20, Cap Screw; M6 X 20, (Sub For Ffsb107718), Screw; M6 X 20, M6 X 20, Screw; (A: From Sr.No.5103e-00***54, 5103-01***65, 5103s-01***62, 5203-00***62, 5104/5204-00***01, 5038d-00***01.) M6 X 20, Screw; M6 X 20 (Sub For 19m7560), Screw; M6 X 20 M6x20 (Sub For 21m7285 Appl), Screw; M6 X 20, (Use With Auxiliary Valve), Screw; (A: Export Version (4x2 Sn 00***00-) (6x4 Sn 01***46-)) M6 X 20, Screw; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M6 X 20, Screw; (A: Use With Al160390) M6 X 20, Screw; M6 X 20 (Sub For (1) J900620)(J260620 Nla), Screw; M6 X 20 (Sub For J900620), Screw; M6 X 20 (2 Used With Endgate, 3 Used Without Endgate), Screw; (A: United Kingdom, France, Germany And Sweden) M6 X 20, Screw; (B) M6x206
24***54Washer; (Sub For Ffsb107438), Screw; 6.400 X 12 X 1.600 mm Lh, Rh, Screw, Screw; (A: Fuel Tank (30.6 Gallon )) (C: Hi-Clearance Fuel Tank) 6.400 X 12 X 1.600 mm, Screw; (A: With Cab) 6.400 X 12 X 1.600 mm, Washer; 6.400 X 12 X 1.600 mm, (Use With Single-Lever Controller), Screw; 6mm, Screw; (A: W/O Hydraulic Cab Suspension (Hcs)) 6.400 X 12 X 1.600 mm, Screw; 6,4x12,5x1,6, Screw; (A: Up) 6.400 X 12 X 1.600 mm Lh, Screw; 6.400 X 12 X 1.600 mm (G), Screw; 6.400 X 12 X 1.600 mm, (Sub For R53942), Screw; 6.4x12.5x1.6mm, Screw; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 6.400 X 12 X 1.600 mm, Screw; 6,6 mm, Screw; 6,6x12,5x1,6mm, Screw; (B: With Open Operator'S Station) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Not Illustrated) (Sub For A590106), Screw; 6,4 X 12,5 X 1,6mm, Screw; (A: 6068hrw77-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; 6,400 X 12 X 1,600 mm, Screw; 6.1x12.5x1.6mm, Screw; 6.400 X 12 X 1.600 mm Rh, Lh, Washer; 6.400 X 12 X 1.600 mm, (Sub For Ffsb107438 And J250006), Washer; 6.400 X 12 X 1.600 mm, (Use With Three-Lever Controller), Screw; (B: 6068hrw73-With Four Valve Engines) (C: 6068hrw80-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm Lh, Up, Screw; 6.400 X 12 X 1.600 mm Sub For A590106, Screw; (B: 6068hrw73-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Use With 37m7366), Screw; 6.400 X 12 X 1.600 mm Hs=10.9, Screw; 6.400 X 12 X 1.600 mm (F), Screw; Ar, 6,4 mm, Screw; (A: Cab Tractors) (B: Oos Tractors) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Use With Al170735), Screw; (A: For Sweden Only) 6.400 X 12 X 1.600 mm, Washer; 6.400 X 12 X 1.600 mm, (Sub For Ffsb107438), Screw; (C: No Longer Required) 6.400 X 12 X 1.600 mm, Screw; 6.4x12 5x1 6mm (Sub For L30863), Screw; 6 mm, Screw; (A: ( -Xxxxxx) 7600-00***91; 7700-01***55; 7800-01***23) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Sub For Er023066 Appl), Screw; 6.400 X 12 X 1.600, Screw; 6 4x12 5x1 6mm, Screw; 6.400 X 12 X 1.600 mm (Sub For R53942), Screw; (B: W/O Hydraulic Cab Suspension (Hcs)) 6.400 X 12 X 1.600 mm, Washer; 6.400 X 12 X 1.600 mm, (Use With Single-Lever Joystick And Single-Lever Auxiliary), Screw; 6.400 X 12 X 1.600 mm (Sub For A590106 ) (Sub For 24m7267, This Application), Washer; (Sub For 42***31), Screw; 6.400 X 12 X 1.600 mm M6.4 X 12.5 X 1.6, Washer; 6.400 X 12 X 1.600 mm, (Use With Two-Lever Controller), Screw; (B: 9550 (70***01- ) 9550sh (70***01- )) 6.400 X 12 X 1.600 mm, Screw; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 6.400 X 12 X 1.600 mm, Screw; (G: ( -Xxxxxx) 7200-00***03; 7400-00***09) 6.400 X 12 X 1.600 mm, Screw; (A) 6,4 X 12,5 X 1,6mm, Screw; 6,4x12,5x1,6mm (Sub For L30863), Screw; (A) 6,4x12,5x1,6mm |, Washer; (Sub For A590106), Screw; 6.400 X 12 X 1.600 mm (Hs, Head Marked 10.9), Screw; (B: 6068hrw75-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; (B) 6,4mm, Screw; 6.400 X 12 X 1.600 mm (0.252" X 0.472" X 0.063") (Sub For R53954), Screw; 6 6mm, Screw; (Sub For L30863), Screw; 6,40x12,5x1,60mm, Screw; 6.400 X 12 X 1.600 mm (0.252" X 0.472" X 0.063"), Screw; 6.400 X 12 X 1.600 mm 6, 4 X 12 X 1, 6 mm, Washer; 6.400 X 12 X 1.600 mm, Screw; 6,4x12,5mm, Screw; 6,4 X 12,5 X 1,mm, Screw; B6,45, Screw; 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm, (Use Without Auxiliary Valve), Screw; 6.400 X 12 X 1.600 mm, Lado Izquierdo Superior, Screw; 6.4mm, Screw; 6,4x12,5x1,6mm, Screw; 6.400 X 12 X 1.600 mm (A), Screw; (C) 6.400 X 12 X 1.600 mm, (Use On Australia And New Zealand 850 And 950 Units), Screw; 6 4mm, Screw; 6.400 X 12 X 1.600 mm J222006 Nla, Screw; (A) (B) 6.400 X 12 X 1.600 mm, Washer; 6.400 X 12 X 1.600 mm, (Use With Three-Lever Stackable), Screw; (Sub For R53954), Screw; 6.400 X 12 X 1.600 mm (Sub For 24m7244), Screw; 6.400 X 12 X 1.600 mm (Sub For A590106), Screw; 6.400 X 12.500 X 1.600mm, Screw; 6,4x 12 X 1,6 mm, Screw; (B), Screw; (A: 4045hrw50-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; 6,6mm, Screw; Ar 6 4mm, Screw; (A) 6,4x12,5x1,6mm, Screw; (Sub For R53942), Screw; 6.400 X 12 X 1.600 mm Sub For J253106, Screw; 6,4x12,5x1,6mm, (Sub For L30863), Screw; 6.400 X 12 X 1.600 mm Din125, Screw; (A) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Use With E131650 And E131651), Screw; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 6.400 X 12 X 1.600 mm, Screw; (A: ( -Xxxxxx) 7200-00***05; 7400-00***12) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm Id= 6mm (Sub For Er023066 Appl), Screw; (A) 6.400x12x1.600mm, Screw; 6.400 X 12 X 1.600 mm (Use With Al81040 Or Al170735 And Re212783), Screw; (B: 2066 Air Conditioning With Heat Diffuser) 6.400 X 12 X 1.600 mm, Screw; Ar, 6,4mm, Washer; 6.400 X 12 X 1.600 mm (0.252" X 0.472" X 0.063") (Sub For Ffsb107905), Screw; 6.400 X 12 X 1.600 mm (Sub For (1) A590106)(Not Illustrated), Screw; 6.400 X 12 X 1.600 mm (Sub For 24m7054), Screw; 6,4 X 12.5 X 1.6mm, Screw; (A: With Divided Windshield) 6.400 X 12 X 1.600 mm, Screw; (A: Condition Monitoring System Components) 6.400 X 12 X 1.600 mm, Screw; B6,4, Screw; (A: Cab) 6.400 X 12 X 1.600 mm, Screw; 6.4x12x1.5mm, Screw; 6,4mm, Screw; 6.400 X 12 X 1.600 mm (Sub For J222006), Screw; (B: For 9650 Sts (70***01- ) & 9750 Sts (70***01- )) 6.400 X 12 X 1.600 mm, Screw; (A) 6.4x12.5x1.6mm, Screw; 6.400 X 12 X 1.600 mm 6, 4x12, 5mm, Screw; 6.400 X 12 X 1.600 mm (Not Illustrated), Screw; (A: Isolated Open Operator Station / Cab) 6.400 X 12 X 1.600 mm (Use With Al81040 Or Al170735 And Re212783), Washer; 6.400 X 12 X 1.600 mm, (With Auxiliary), Screw; 6,4 mm, Screw; (F: (Xxxxxx- ) 7200-00***04; 7400-00***10) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm 6, 4 mm, Screw; (A: No Longer Required) 6.400 X 12 X 1.600 mm, Washer, Screw; (B: Up) 6.400 X 12 X 1.600 mm Lh, Screw; 6,4x12x1,5mm, Washer; 6.400 X 12 X 1.600 mm, (Sub For A590106), Screw; 6,4x19,5x1,6mm, Screw; (A: Fuel Tank (30.6 Gallon )) (C: Tank For High Clearance) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Sub For J260614), Screw; 6,4 X 12 X 1,6, Screw; 6.4x12x1.6mm, Screw; (A) 6,400 X 12 X 1,600 mm, Screw; Ar 6,4mm, Washer; 6.400 X 12 X 1.600 mm, (Without Auxiliary), Screw; (B) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Nlr), Screw; M6, Washer; 6.400 X 12 X 1.600 mm (0.252" X 0.472" X 0.063") (Sub For Ffsb107438), Screw; 6.400 X 12 X 1.600 mm 6mm, Screw; 6.400 X 12 X 1.600 mm (Use With Al81040 Or Al170735), Screw; 6.400 X 12 X 1.600 mm (C), Screw; 6,4 X 12 X 1,6 mm, Screw; 6.400 X 12 X 1.600 mm Not Illustrated, Screw; (B: No Longer Required) 6.400 X 12 X 1.600 mm12
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 38 Hydraulic Lines : Hydraulic-Lines (Steering) [01g07]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm7
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M67
19***59Cap Screw; M6 X 16, Cap Screw; (A) M6x16, Cap Screw; M6 X 15, Cap Screw; 6x15mm, Cap Screw; M6x16, Cap Screw; (A) M6 X 16, Cap Screw; 6 X 15 mm, Cap Screw; M10 X 20, Cap Screw; (B) M6x16, Cap Screw; 6x16mm, Cap Screw; M6x15, Cap Screw; (A) 6x16mm, Cap Screw; M8x16, Cap Screw; Ar, M6 X 16, Cap Screw; M6, Cap Screw; M8x157
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 38 Hydraulic Lines : Hydraulic-Lines (Variable Ground Drive) [01g01]
AZ***72Elbow Fitting; Incl Keys 7,8 (Sub For Az21273), Elbow Fitting, Elbow Fitting; Incl Keys 24,25, Elbow Fitting; (C: With Front Wheel Brakes), Elbow Fitting; Incl Keys 34,42, Elbow Fitting; Incl Keys 7,8, Elbow Fitting; Incl Keys 15,16 (Sub For Az21273), Elbow Fitting; (Sub For Az21273)1
AZ***77Oil Line; Incl Keys 7,8 (Sub For Az19277), Oil Line; Incl Keys 7,81
AZ***78Oil Line; Incl Keys 7,8, Oil Line; Incl Keys 7,8 (Sub For Az19278)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 38 Hydraulic Lines : M E M O R A N D A [01g12]
John Deere : 940 - Combine : 38 Hydraulic Lines : M E M O R A N D A [01g15]
John Deere : 940 - Combine : 38 Hydraulic Lines : M E M O R A N D A [01g16]
John Deere : 940 - Combine : 38 Hydraulic Lines : Pressure Indicator-Cutting Platform [01g13]
19***38Cap Screw; Ar, 6x40, Cap Screw; Ar, M6x40, Cap Screw; Ar, 6 X 40 mm, Cap Screw; M6x40, Cap Screw, Cap Screw; M6 X 40, Cap Screw; Ar, M6 X 401
24***14Washer; 17/64"X5/8"X.048", Washer; Ar0
24***54Washer; (Sub For Ffsb107438), Screw; 6.400 X 12 X 1.600 mm Lh, Rh, Screw, Screw; (A: Fuel Tank (30.6 Gallon )) (C: Hi-Clearance Fuel Tank) 6.400 X 12 X 1.600 mm, Screw; (A: With Cab) 6.400 X 12 X 1.600 mm, Washer; 6.400 X 12 X 1.600 mm, (Use With Single-Lever Controller), Screw; 6mm, Screw; (A: W/O Hydraulic Cab Suspension (Hcs)) 6.400 X 12 X 1.600 mm, Screw; 6,4x12,5x1,6, Screw; (A: Up) 6.400 X 12 X 1.600 mm Lh, Screw; 6.400 X 12 X 1.600 mm (G), Screw; 6.400 X 12 X 1.600 mm, (Sub For R53942), Screw; 6.4x12.5x1.6mm, Screw; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 6.400 X 12 X 1.600 mm, Screw; 6,6 mm, Screw; 6,6x12,5x1,6mm, Screw; (B: With Open Operator'S Station) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Not Illustrated) (Sub For A590106), Screw; 6,4 X 12,5 X 1,6mm, Screw; (A: 6068hrw77-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; 6,400 X 12 X 1,600 mm, Screw; 6.1x12.5x1.6mm, Screw; 6.400 X 12 X 1.600 mm Rh, Lh, Washer; 6.400 X 12 X 1.600 mm, (Sub For Ffsb107438 And J250006), Washer; 6.400 X 12 X 1.600 mm, (Use With Three-Lever Controller), Screw; (B: 6068hrw73-With Four Valve Engines) (C: 6068hrw80-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm Lh, Up, Screw; 6.400 X 12 X 1.600 mm Sub For A590106, Screw; (B: 6068hrw73-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Use With 37m7366), Screw; 6.400 X 12 X 1.600 mm Hs=10.9, Screw; 6.400 X 12 X 1.600 mm (F), Screw; Ar, 6,4 mm, Screw; (A: Cab Tractors) (B: Oos Tractors) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Use With Al170735), Screw; (A: For Sweden Only) 6.400 X 12 X 1.600 mm, Washer; 6.400 X 12 X 1.600 mm, (Sub For Ffsb107438), Screw; (C: No Longer Required) 6.400 X 12 X 1.600 mm, Screw; 6.4x12 5x1 6mm (Sub For L30863), Screw; 6 mm, Screw; (A: ( -Xxxxxx) 7600-00***91; 7700-01***55; 7800-01***23) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Sub For Er023066 Appl), Screw; 6.400 X 12 X 1.600, Screw; 6 4x12 5x1 6mm, Screw; 6.400 X 12 X 1.600 mm (Sub For R53942), Screw; (B: W/O Hydraulic Cab Suspension (Hcs)) 6.400 X 12 X 1.600 mm, Washer; 6.400 X 12 X 1.600 mm, (Use With Single-Lever Joystick And Single-Lever Auxiliary), Screw; 6.400 X 12 X 1.600 mm (Sub For A590106 ) (Sub For 24m7267, This Application), Washer; (Sub For 42***31), Screw; 6.400 X 12 X 1.600 mm M6.4 X 12.5 X 1.6, Washer; 6.400 X 12 X 1.600 mm, (Use With Two-Lever Controller), Screw; (B: 9550 (70***01- ) 9550sh (70***01- )) 6.400 X 12 X 1.600 mm, Screw; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 6.400 X 12 X 1.600 mm, Screw; (G: ( -Xxxxxx) 7200-00***03; 7400-00***09) 6.400 X 12 X 1.600 mm, Screw; (A) 6,4 X 12,5 X 1,6mm, Screw; 6,4x12,5x1,6mm (Sub For L30863), Screw; (A) 6,4x12,5x1,6mm |, Washer; (Sub For A590106), Screw; 6.400 X 12 X 1.600 mm (Hs, Head Marked 10.9), Screw; (B: 6068hrw75-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; (B) 6,4mm, Screw; 6.400 X 12 X 1.600 mm (0.252" X 0.472" X 0.063") (Sub For R53954), Screw; 6 6mm, Screw; (Sub For L30863), Screw; 6,40x12,5x1,60mm, Screw; 6.400 X 12 X 1.600 mm (0.252" X 0.472" X 0.063"), Screw; 6.400 X 12 X 1.600 mm 6, 4 X 12 X 1, 6 mm, Washer; 6.400 X 12 X 1.600 mm, Screw; 6,4x12,5mm, Screw; 6,4 X 12,5 X 1,mm, Screw; B6,45, Screw; 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm, (Use Without Auxiliary Valve), Screw; 6.400 X 12 X 1.600 mm, Lado Izquierdo Superior, Screw; 6.4mm, Screw; 6,4x12,5x1,6mm, Screw; 6.400 X 12 X 1.600 mm (A), Screw; (C) 6.400 X 12 X 1.600 mm, (Use On Australia And New Zealand 850 And 950 Units), Screw; 6 4mm, Screw; 6.400 X 12 X 1.600 mm J222006 Nla, Screw; (A) (B) 6.400 X 12 X 1.600 mm, Washer; 6.400 X 12 X 1.600 mm, (Use With Three-Lever Stackable), Screw; (Sub For R53954), Screw; 6.400 X 12 X 1.600 mm (Sub For 24m7244), Screw; 6.400 X 12 X 1.600 mm (Sub For A590106), Screw; 6.400 X 12.500 X 1.600mm, Screw; 6,4x 12 X 1,6 mm, Screw; (B), Screw; (A: 4045hrw50-With Four Valve Engines) 6.400 X 12 X 1.600 mm, Screw; 6,6mm, Screw; Ar 6 4mm, Screw; (A) 6,4x12,5x1,6mm, Screw; (Sub For R53942), Screw; 6.400 X 12 X 1.600 mm Sub For J253106, Screw; 6,4x12,5x1,6mm, (Sub For L30863), Screw; 6.400 X 12 X 1.600 mm Din125, Screw; (A) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Use With E131650 And E131651), Screw; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 6.400 X 12 X 1.600 mm, Screw; (A: ( -Xxxxxx) 7200-00***05; 7400-00***12) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm Id= 6mm (Sub For Er023066 Appl), Screw; (A) 6.400x12x1.600mm, Screw; 6.400 X 12 X 1.600 mm (Use With Al81040 Or Al170735 And Re212783), Screw; (B: 2066 Air Conditioning With Heat Diffuser) 6.400 X 12 X 1.600 mm, Screw; Ar, 6,4mm, Washer; 6.400 X 12 X 1.600 mm (0.252" X 0.472" X 0.063") (Sub For Ffsb107905), Screw; 6.400 X 12 X 1.600 mm (Sub For (1) A590106)(Not Illustrated), Screw; 6.400 X 12 X 1.600 mm (Sub For 24m7054), Screw; 6,4 X 12.5 X 1.6mm, Screw; (A: With Divided Windshield) 6.400 X 12 X 1.600 mm, Screw; (A: Condition Monitoring System Components) 6.400 X 12 X 1.600 mm, Screw; B6,4, Screw; (A: Cab) 6.400 X 12 X 1.600 mm, Screw; 6.4x12x1.5mm, Screw; 6,4mm, Screw; 6.400 X 12 X 1.600 mm (Sub For J222006), Screw; (B: For 9650 Sts (70***01- ) & 9750 Sts (70***01- )) 6.400 X 12 X 1.600 mm, Screw; (A) 6.4x12.5x1.6mm, Screw; 6.400 X 12 X 1.600 mm 6, 4x12, 5mm, Screw; 6.400 X 12 X 1.600 mm (Not Illustrated), Screw; (A: Isolated Open Operator Station / Cab) 6.400 X 12 X 1.600 mm (Use With Al81040 Or Al170735 And Re212783), Washer; 6.400 X 12 X 1.600 mm, (With Auxiliary), Screw; 6,4 mm, Screw; (F: (Xxxxxx- ) 7200-00***04; 7400-00***10) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm 6, 4 mm, Screw; (A: No Longer Required) 6.400 X 12 X 1.600 mm, Washer, Screw; (B: Up) 6.400 X 12 X 1.600 mm Lh, Screw; 6,4x12x1,5mm, Washer; 6.400 X 12 X 1.600 mm, (Sub For A590106), Screw; 6,4x19,5x1,6mm, Screw; (A: Fuel Tank (30.6 Gallon )) (C: Tank For High Clearance) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Sub For J260614), Screw; 6,4 X 12 X 1,6, Screw; 6.4x12x1.6mm, Screw; (A) 6,400 X 12 X 1,600 mm, Screw; Ar 6,4mm, Washer; 6.400 X 12 X 1.600 mm, (Without Auxiliary), Screw; (B) 6.400 X 12 X 1.600 mm, Screw; 6.400 X 12 X 1.600 mm (Nlr), Screw; M6, Washer; 6.400 X 12 X 1.600 mm (0.252" X 0.472" X 0.063") (Sub For Ffsb107438), Screw; 6.400 X 12 X 1.600 mm 6mm, Screw; 6.400 X 12 X 1.600 mm (Use With Al81040 Or Al170735), Screw; 6.400 X 12 X 1.600 mm (C), Screw; 6,4 X 12 X 1,6 mm, Screw; 6.400 X 12 X 1.600 mm Not Illustrated, Screw; (B: No Longer Required) 6.400 X 12 X 1.600 mm1
See all parts with full part numbers in Heavy Parts AI →
48 Cutting Platform
John Deere : 940 - Combine : 48 Cutting Platform : Auger [01i17]
03***17Bolt; (312) M10 X 25, Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 X 25 2130, Bolt; (D: Components Of Item Dq73362) M10 X 25, Bolt; (A), Bolt; M10x26, Bolt; M10 X 25 (Sub For Er020630, Appl), Bolt; (A) M10x25, Bolt; M10 X 25 3/8" X 3" Rh (Sub For 03h1658 Or 03h2131), Bolt; (B) M10x25, Bolt; M10 X 25 (Sub For 03m7084), Bolt; M10 X 25, (Sub For 03m7088), Bolt; (312) M10x25, Bolt; M10x25, Bolt; M10 X 25, Bolt; M10 X 25 M10x25, Bolt; M10 X 25 M10 X 25, Bolt, Bolt; (A: With Long Feeder House) M10 X 25, Bolt; M10 X 25, M10x25, Bolt; (A) 10x25mm, Bolt; (A: Rice) M10 X 25, Bolt; M10 X 25 (Sub For Er020630 Appl), Bolt; 10 X 25 mm, Bolt; 10x25mm, Bolt; (B) M10 X 25, Bolt; (A: For Rice) M10 X 251
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm9
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm5
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Auger [01i19]
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm0
14***31Nut; M16 (Ord Gb6171-86), Nut; M16x1,5, Nut; M16, Nut; M16 X 1,5, Nut; 16x1,5mm, Nut; M16x1 50
14***40Nut; M10 |, Nut; M8 (Sub For 14m7137), Nut; M16, Nut; 10mm, Nut; (Sub For 14m7039), Nut; M8, Nut; 10mm (Sub For 14m7039), Nut; M10, (312) M10, Nut; 10 mm, Nut; M10, 3,2x20mm, Nut; (C) M10, Nut; Ar, 10mm, Nut; M10, (312), Nut; (A: For Rice) M10, Nut; M10, Nut; (B) 8 mm, Nut; Ar, M10, Nut; M10 (Ord W/Sb12585100/0), Nut; M10, M10x25, Nut; 12mm, Nut; (D: Components Of Item Dq73362) M10, Nut; M10 (Sub For 14m7273), Nut; M10 Lh, Nut; (A: Rice Version) M10, Nut; (A: W/ Lateral Tilt) M10, Nut, Nut; (A) M8, Nut; M10, M10, Nut; M10, M12x30, Nut; M10, 11x21x2mm, Nut; M10 (Sub For 14m7039), Nut; (A: Rice) M10, Nut; (A) 10mm, Nut; (A) M10, Nut; M10x50, Nut; M10 M10, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10, Nut; 10x1,5mm, Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M10, Nut; (A: No Longer Required) M10, Nut; (B) M100
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Bearing Arm With Shaft [01i11]
03***73Bolt, Bolt; M10 X 60, Bolt; M10x601
03***79Bolt; M10 X 55, Bolt, Bolt; M10x55, Bolt; 10x55mm, Bolt; M10 X 55 103 Used ;14'(4.3 M), 118 Used ; 16'(4.9 M), 138 Used;18'(5.5 M), Bolt; M10 X 601
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Cutter Bar (Cutting Platform) [01h05]
03***85Bolt; M10x25, Bolt; (A: For Flat Discharge Spout Only) M10 X 30, Bolt; (A), Bolt; M10 X 30 M10x30, Bolt; (A) M10x30, Bolt; (B: Without Lateral Tilt) M10 X 30, Bolt; (A: For Usa Only) M10 X 30, Bolt; (312) M10x30, Bolt; (A: With Master) M10 X 30, Bolt; M10 X 30 (Square Neck), Bolt; M10 X 30, Bolt; (C), Bolt; M10 X 30 (Hs, Head Marked 10.9), Bolt; M10 X 30 M10 X 30, Bolt, Bolt; M10x30, Bolt; (E: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***01- ), 2115 (06***01- )) (F: Starting From Series Number 2117 (06***01- ), 2122 (06***01- ), 2126 (06***06- )) M10 X 30 2130, Bolt; M10x25 (Sub For 03m7084), Bolt; M10x20, Bolt; (D: Components Of Item Dq73362) M10 X 30, Bolt; (A: W/ Master) M10 X 30, Bolt; 10x30mm3
03***86Bolt; M10 X 30 (Square Neck), Bolt; M10 X 30, Bolt; M10x300
03***87Bolt; M10 X 38, Bolt; 10x38mm0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Cutting Platform Bottom - Rear Sheet [01h17]
11***28Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44***59, 5520: Sn -45***00) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-00***13), 5403 (-00***75).), Pin; 5 X 32 mm, (Sub For 11h218)2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm0
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Cutting Platform Bottom [01h15]
John Deere : 940 - Combine : 48 Cutting Platform : Cutting Platform Drive [01h13]
14***40Nut; M10 |, Nut; M8 (Sub For 14m7137), Nut; M16, Nut; 10mm, Nut; (Sub For 14m7039), Nut; M8, Nut; 10mm (Sub For 14m7039), Nut; M10, (312) M10, Nut; 10 mm, Nut; M10, 3,2x20mm, Nut; (C) M10, Nut; Ar, 10mm, Nut; M10, (312), Nut; (A: For Rice) M10, Nut; M10, Nut; (B) 8 mm, Nut; Ar, M10, Nut; M10 (Ord W/Sb12585100/0), Nut; M10, M10x25, Nut; 12mm, Nut; (D: Components Of Item Dq73362) M10, Nut; M10 (Sub For 14m7273), Nut; M10 Lh, Nut; (A: Rice Version) M10, Nut; (A: W/ Lateral Tilt) M10, Nut, Nut; (A) M8, Nut; M10, M10, Nut; M10, M12x30, Nut; M10, 11x21x2mm, Nut; M10 (Sub For 14m7039), Nut; (A: Rice) M10, Nut; (A) 10mm, Nut; (A) M10, Nut; M10x50, Nut; M10 M10, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10, Nut; 10x1,5mm, Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M10, Nut; (A: No Longer Required) M10, Nut; (B) M102
14***65Lock Nut; (A: Used In High Clearance Tractors Too) M6, Lock Nut; N6, Lock Nut; M6 (Sub For 14m7272), Lock Nut; (A: For Germany Only) M6, Lock Nut; M6 (Sub For 14m7376), Lock Nut; M6 (Sub For Er022403 Appl), Lock Nut; M6, Incl Key 6, Lock Nut; (A: With Mechanical Speed Adjustment) M6, Lock Nut; M6 Control Module, Lock Nut; M6 Finger Grate Plastic Sheet And Hardware, Use In A Green Leafy Condition (Optional), Lock Nut; (C: 4045hl281-With Two Valve Engines) M6, Lock Nut; M6 M6, Lock Nut; M6, Lock Nut; (A) M6, Lock Nut; (C) M6, Lock Nut; M6 Includes Dq23974, Lock Nut; M6 (Use With Rops), Lock Nut; (B: Basic Version) M6, Lock Nut; (B) M6, Lock Nut; (A: For Italy Only) M6, Lock Nut; M6 (European) (Front Hole Side Panel), Lock Nut; (A: With Divided Windshield) M6, Lock Nut; M6 (A) (B), Lock Nut; (E: W/Hand Throttle Only) M6, Lock Nut; M6 (Sub For Er022405appl), Lock Nut; (A: For Front And Sides) M6, Lock Nut; (B: Use With Ar93448) M6, Lock Nut; (A: European Version) (B: W/Passenger Seat) M6, Lock Nut; M6 (Sub For Er022404 Appl), Lock Nut; (A: Cab Tractors) (B: Oos Tractors) M6, Lock Nut; M6 (Cabine), Lock Nut; (A: European Community) M6, Lock Nut; 6 mm, Lock Nut; (C: 6068hrw74-With Two Valve Engines) M6, Lock Nut; (C: W/Hand Throttle Only) M6, Lock Nut; M6, (312) (B), Lock Nut; M6 (Sub For Er022405 Appl), Lock Nut; (F: Only For Super Narrow Version) M6 (Sub For Er022404 Appl), Lock Nut; M6, (Use With Code 3103, 3105, 3106), Lock Nut; (Use With 90 Amp Alternator), Lock Nut; M8, Lock Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) M6, Lock Nut; M6 M4 (Sub For Er022403 Appl), Lock Nut; (C: 6068hrw72-With Two Valve Engines) M6, Lock Nut; M6, (Sub For 14m7376), Lock Nut; (A) (B), Lock Nut; M6 M6 Use With Re70779, Lock Nut; (C: 4045hl280-With Two Valve Engines) M6, Lock Nut; (C: Starting From Series Number 2109 (07***01-), 2111 (07***01-), 2113 (07***01-), 2115 (07***01-)) (D: Starting From Series Number 2117 (07***01-), 2122 (07***01-), 2126 (07***06-)) M6, Lock Nut; M6 X 1, Lock Nut; M6 Rh, Lh, Lock Nut; (A: Components Of Item Dq73362) M6, Lock Nut; M6 M6 X 1, Lock Nut; M6 (Export), Lock Nut; M6 M6m6, Lock Nut; M6 (Alternator Output Terminal), Lock Nut; M6, Lock Nut, Lock Nut; (A) M6 (Sub For E68605), Lock Nut; (A: With Cab) (B: Isolated Open Operator Station) M6, Lock Nut; (A: European Version) M6, Lock Nut; Ar, M6, Lock Nut; M6 M5, Lock Nut; M6 (Sub For 14m7165 Appl), Lock Nut; M6, M6, Lock Nut; M6 (C), Lock Nut; (A: Use Only With Electro-Hydraulic Power Take-Off) M6, Lock Nut; M6, (Sub For R71248), Lock Nut; (K: At100208 Linkage - No Longer Available (Includes At101913, At106687, C1067r, M84972, T100992,) M6, Lock Nut; (A: W/O Cab) M6, Lock Nut; M6 (Except Europe), Lock Nut; (A: (5410) 34***49- (5510) 35***35-) M6 W/ A/C, Lock Nut; M6 (A), Lock Nut; M6 (Sub For Er022405, Appl), Lock Nut; M6, (312) M6, Lock Nut; (A: Pro-12 - 18s) M6, Lock Nut; (D: Components Of Item Dq73362) M6, Lock Nut; (A: Collarshift Transmission (5420) Sn 44***13- (5520) Sn 45***04-) M6, Lock Nut; M6, (Use With An193461), Lock Nut; (A: With Mechanical Speed Control) M6, Lock Nut; M6 (Sub Er022405 Appl), Lock Nut; M6 (European, Export) (Upper Front Hole Only), Lock Nut; M6 (Sub For R71248), Lock Nut; M6 Lh, Lock Nut; (A: W/O Chopper) M6, Lock Nut; (C: (5410) -34***48 (5510) -35***34) M6 W/ A/C, Lock Nut; M6 2113, Lock Nut; M6 W/ A/C, Lock Nut; M6 2130, Lock Nut; M6, (Output Terminal), Lock Nut; M6, W/ A/C, Lock Nut; M6 (Nla), Lock Nut; M6 2126, Lock Nut; (C: With 3-Lever Control / Conversion) M6, Lock Nut; M6 (Sub For 14m7298 Appl), Lock Nut; M6 Nylstop, Lock Nut; (A) (B) M6, Lock Nut; M6, (312), Lock Nut; (A: Cab) M6, Lock Nut; M6 (A), (B), Lock Nut; 6mm, Lock Nut; M6, (A), Lock Nut; M6 Lh, Rh, Lock Nut; M6 (Sub For E68605), Lock Nut; (A: Collarshift Transmission (5220) Sn 42***11- (5320) Sn 43***07-) M63
26***33Shaft Key; 8 X 13 mm, Shaft Key; 8x13mm, Shaft Key; 8 X 13mm, Shaft Key, Shaft Key; M8 X 13, Shaft Key; 8 X 32 mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Cutting Platform Guards [01h23]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x208
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm7
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm12
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Cylinder Cleaning Opening Cover [01j06]
11***13Cotter Pin; (A) 3x20mm, Cotter Pin; 3x2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x18mm (Sub For 34m7010), Cotter Pin; 3x10mm, Cotter Pin; 3x18mm, Cotter Pin; M3 X 20, Cotter Pin; 3,2 X 18 mm, Cotter Pin; 3.200 X 18 mm, Cotter Pin; 3x20mm, Cotter Pin; (A) 3,2x20mm, Cotter Pin, Cotter Pin; 3 2x18mm, Cotter Pin; 3,2x18mm, Cotter Pin; M3,2 X 20, Cotter Pin; 3 X 2 X 20 mm, Cotter Pin; 3,2 X 20 mm, Cotter Pin; 3 X 10 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm6
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M66
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Deflector,Long And Short [01h03]
11***20Cotter Pin; 4 X 25 mm, Cotter Pin, Cotter Pin; 4 X 22 mm, Cotter Pin; 4 X 25 mm |, Cotter Pin; 4 X 22 mm 4 X 22mm, Cotter Pin; (A) 4x22mm, Cotter Pin; 4 X 22mm, Cotter Pin; 4x22, Cotter Pin; 4x22mm, Cotter Pin; 4x25mm, Cotter Pin; (A) 4 X 22 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; Ar, 4 X 22 mm, Cotter Pin; M4 X 25, Cotter Pin; (A), Cotter Pin; 4 X 20mm3
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm4
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Divider With Extension [01g23]
11***07Cotter Pin; 2 X 10mm, Cotter Pin, Cotter Pin; 2 X 12 mm, Cotter Pin; 2 X 10 mm, Cotter Pin; 2 X 10 mm, (Sub For 11h232)2
11***20Cotter Pin; 4 X 25 mm, Cotter Pin, Cotter Pin; 4 X 22 mm, Cotter Pin; 4 X 25 mm |, Cotter Pin; 4 X 22 mm 4 X 22mm, Cotter Pin; (A) 4x22mm, Cotter Pin; 4 X 22mm, Cotter Pin; 4x22, Cotter Pin; 4x22mm, Cotter Pin; 4x25mm, Cotter Pin; (A) 4 X 22 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; Ar, 4 X 22 mm, Cotter Pin; M4 X 25, Cotter Pin; (A), Cotter Pin; 4 X 20mm2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Feeder Conveyor Chain And Upper Shaft [01j03]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm12
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm4
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm9
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Feeder Conveyor Lower Shfat [01j01]
11***22Cotter Pin; M4 X 30, Cotter Pin; 4x30mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 30 mm |, Cotter Pin; 4x28mm, Cotter Pin; 4 X 30 mm, Cotter Pin; (A) 4x28mm, Cotter Pin; 4 X 28 mm, (Sub For 11h222), Cotter Pin4
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Feeder Conveyor [01i23]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x204
03***80Bolt; M16 X 70 (Sub For Z23400), Bolt; M16 X 70, Bolt; M16x701
03***88Bolt; 10x20mm, Bolt, Bolt; (A: For Tractor With 2 Steps, On The Left And On The Right) M10 X 20, Bolt; (312) M10x20, Bolt; (A: With Hydraulic Cab Suspension (Hcs)) M10 X 20, Bolt; M10 X 20 Lh And Rh, Bolt; M10 X 20 M10x20, Bolt; (A: Fuel Tank, 30 Gallon (113, 6 Liter) (Cab)) M10 X 20, Bolt; (A: With Raised Fuel Tank For Better Ground Clearance) M10 X 20, Bolt; (A: With Raised Fuel Tank For Better Ground Clearance) (B: With Hydraulic Cab Suspension (Hcs)) M10 X 20, Bolt; M10 X 25, Bolt; M10 X 20 (Sub For 03m7035), Bolt; M10 X 20 M10 X 20, Bolt; M10 X 20, Bolt; M10x20, Bolt; 10 X 20 mm, Bolt; M10 X 80, Bolt; M10 X 20 (Lh And Rh), Bolt; (A) M10 X 20, Bolt; (A: For Tractor With 3 Steps, On The Left And On The Right) M10 X 204
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Hydraulic Parts For Cutting Platform [01j09]
11***38Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm2
14***09Nut; 1/2" (2 Used, Non-Adj Airfoil;4 Used, Adj), Nut; 1/2", Nut; 1/2" (Nla), Nut; 1/2", (Into Header With Keyed Hub), Nut; X 3/8", Nut; X X 1/2", Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Nut; 1/2" (Non-Adj Airfoil), Nut, Nut; 1/2" Quantity (2) Into Header With Keyed Hub, Nut; 1/2" Nla, Nut; 1/2", (Use With Aa58404), Nut; (B: For Msl) 1/2", Nut; 1/2", (Sub For Mg280431), Nut; (B: For 390 Offset Mower) 1/2" 305mm (12''), Nut; 1/2" (A), Nut; 3/8", Nut; X 1/2", Nut; 1/2" :, Nut; 1/2", Ar, Nut; 1/2", Rh, Nut; (A) 1/2", Nut; 1/2" (154"), Nut; 12.700 mm, (Sub For Ffsb109315), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Nut; (D) 1/2", (Sub For Mg280431), Nut; 1/2" (Use With H109640), Nut; X 1/2", Nut; (B) (C) M12,7, Nut; 1/2", (Nla), Nut; 1/2" (Adj Chaffers), Nut; 1/2" (Into Header With Keyed Hub), Nut; (B) 1/2" W/O 11, Nut, Nut; 1/2" Lh Strap, Nut; 1/2" (4-Used, Adj; 2-Used, Non-Adj Airfoil), Nut; (A) (B) 1/2", Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Nut; 1/2", (154"), Nut; 5/8", Nut; 0,5", Nut; 1/2", (540rpm), Nut; 1/2", (Ty2036) (Sub 14h1040), Nut; 1/2", Use 12 For 1850mm; 18 For 2150mm, Nut; (B: For Msl) (C: For Nsl) 1/2", Nut; Rh, 1/2", Nut; 12.700 mm, Nut; 1/2" (Sub For Pt19060), Nut; 12.700 mm (1/2"), Nut; 1/2" (2 Used, Non-Adj Airfoil; 4 Used, Adj), Nut; 1/2" (Sub 14h1040), Nut; 1/2", (Sub 14h1040), Nut; (B) (C) 0,5", Nut; (C) 1/2", Nut; 1/2", (Sub For Ffsb109315), Nut; X 1/2", Nut; (Sub For Pt19060), Nut; (B) 0,5", Nut; (A: Mg803115 Light Kit) 1/2", Nut; (B) 1/2", Nut; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/2", Nut; 1/2", (Sub R66288, R66289, (4) 03h1598, (4) 03h1731, (8) 12h301 And (8) 14h1040), Nut; (B) M12,7, Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2", Nut; 1/28
51***36Ring; 14mm, Ring, Ring; (A) (Sub For R93008), Ring; 14 X 18mm, Ring; 14.200 X 17.900 X 1.500mm, Ring; (A) 14x18mm (For Az25220), Ring; 14x18mm, Ring; (Sub For R93008), Sealing Ring; (Sub For R93008), Ring; (A), Ring; 14x18x1,5mm, Ring; (A: For 9650 Combine ( -69***93); Also Serial Nos. 69***96-69***00, 69***03, 69***04 And 69***06.) (Sub For R93008), Ring; 14 X 18 mm, Sealing Ring, Ring; (A: For 9650 Cts Combine ( -69***09)) (Sub For R93008), Ring; 14 mm, Sealing Ring; (Use With R83489) (Sub For R93008), Ring; (A) 14 X 18 mm (For Az25220), Ring; 14,2 X 17,9 X 1,5 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Knife Drive [01h11]
03***15Bolt; M16x50, Bolt; M16 X 501
03***29Bolt; M16 X 55, Bolt; M16x551
11***13Cotter Pin; (A) 3x20mm, Cotter Pin; 3x2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x18mm (Sub For 34m7010), Cotter Pin; 3x10mm, Cotter Pin; 3x18mm, Cotter Pin; M3 X 20, Cotter Pin; 3,2 X 18 mm, Cotter Pin; 3.200 X 18 mm, Cotter Pin; 3x20mm, Cotter Pin; (A) 3,2x20mm, Cotter Pin, Cotter Pin; 3 2x18mm, Cotter Pin; 3,2x18mm, Cotter Pin; M3,2 X 20, Cotter Pin; 3 X 2 X 20 mm, Cotter Pin; 3,2 X 20 mm, Cotter Pin; 3 X 10 mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Knife With 6 Mm Rivets [01h09]
14***26Nut; 1/2" Unf Slotted, Nut, Nut; 1/2", Nut; 1/2" (Sub For B3279r), Nut; 12.700 mm, Nut; 1/2", Nut; 1/2" Slotted, Nut; 1/2" (W/ E38908), Nut; 1/2" (A), Nut; 1/2", Slotted, Unf1
16***24Rivet; 6x18mm, Rivet; (Sub For Az32299), Rivet, Rivet; 6 X 18 mm, Rivet; 6 X 1 8 mm, Rivet; M6 X 180
16***27Rivet, Rivet; 6x25mm, Rivet; 6 X 25 mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01h22]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j11]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j12]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j13]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j14]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j15]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j16]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j17]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j18]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j19]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j20]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j21]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j22]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j23]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j24]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01j25]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k01]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k02]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k03]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k04]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k05]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k06]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k07]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k08]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k09]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k10]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k11]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k12]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k13]
John Deere : 940 - Combine : 48 Cutting Platform : M E M O R A N D A [01k14]
John Deere : 940 - Combine : 48 Cutting Platform : Reel Adjusting Cable [01i15]
11***08Cotter Pin; 2x14mm, A=26,5mm, Cotter Pin; 2 X 14 mm, Cotter Pin; 2 X 15 mm, Cotter Pin; 8mm, Cotter Pin; 2x14mm, Cotter Pin; 2x15mm, Cotter Pin, Cotter Pin; 2 X 15mm, Cotter Pin; 2 X 14mm, Cotter Pin; (G: (Xxxxxx- ) 7200-00***60; 7400-00***14) (I: (Xxxxxx- ) 7200-00***87; 7400-00***32) 2 X 14 mm, Cotter Pin; 2 X 14 mm M2 X 30, Cotter Pin; (F: ( -Xxxxxx) 7200-00***81; 7400-00***26) 2 X 14 mm1
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm5
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Reel And Reel Support [01i03]
14***31Nut; M6, Nut; M12 (D), Nut; M12, Nut; M12m, Nut; 12 mm, Nut; M12 (W/ E63932), Nut; 12 mm (W/ E63932) Key 3, Nut; M12 (For Z45182), Nut; 3/8", Nut; (A: For Exportation) M12, Nut; 12 mm (W/ Dc18663), Nut; M14, Nut; M12, M12, Nut; M12 (Sub For 14m7042) |, Nut; (A) (B) (C), Nut; Ar, M12 (Sub For 14m7042), Nut; (C: For Commandcenter) M12, Nut; 14 mm, Nut; (A) (B) (C) M12, Nut; M12 (Sub For 14m7042), Nut; M12 M12, Nut; 12 mm (W E63932) Key 3, Nut; M12 (W/ E63930), Nut; (A) M12, Nut; 12mm, Nut, Nut; Ar, M12, Nut; M12, (312) M12, Nut; M12 |, Nut; M12, (312), Nut; M12 (W/ Dc18663), Nut; M12 Sub For 14m7275, Nut; 12x1,75, Nut; (A), Nut; M12 (Sub For 14m7066), Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M12, Nut; M12, M8x80, Nut; (C) M12, Nut; M12, Rh, Nut; 12 mm (W/ E63930), Nut; M12 (W/ Dc18661)0
49***95Shaft Key; (A) 8x7x63mm, Shaft Key; 8x7mm, Shaft Key; 8 X 7 X 63 mm 8 X 7 mm, Shaft Key; 8 X 7 X 63 mm 8x7mm, Shaft Key; 8 X 7 X 63 mm, Shaft Key; 8x7x63mm, Shaft Key; (A) B8x7x63mm, Shaft Key; 8 X 7 mm1
58***04Lubrication Fitting; (Sub 58m5573), Lubrication Fitting; M6x1, Lubrication Fitting; 6x1mm, Lubrication Fitting; M6, Lubrication Fitting; 6mm, Lubrication Fitting; (A: For Central Lubrication System Only), Lubrication Fitting, Lubrication Fitting; (A), Lubrication Fitting; (A: For Double-Row Bearing), Lubrication Fitting; H1m6 X 1 mm, Lubrication Fitting; (A: Use Only For Kernel Processor Quick Conversion), Lubrication Fitting; As6, Lubrication Fitting; 6 X 1 mm, Lubrication Fitting; (Sub For 58m5573), Lubrication Fitting; (A: For Msl), Lubrication Fitting; (A) M6x1, Lubrication Fitting; M6 X 1, Lubrication Fitting; H1m6x1mm, Lubrication Fitting; 6 mm, Lubrication Fitting; M6 X1, Lubrication Fitting; 6 X 1 mm (For Z11381, Z11529), Lubrication Fitting; (Sub For Z52243)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Reel And Reel Support [01i05]
49***70Shaft Key; 10 X 8 X 54 mm, Shaft Key; 10x8x45mm, Shaft Key; 10 X 8 X 45 mm1
58***04Lubrication Fitting; (Sub 58m5573), Lubrication Fitting; M6x1, Lubrication Fitting; 6x1mm, Lubrication Fitting; M6, Lubrication Fitting; 6mm, Lubrication Fitting; (A: For Central Lubrication System Only), Lubrication Fitting, Lubrication Fitting; (A), Lubrication Fitting; (A: For Double-Row Bearing), Lubrication Fitting; H1m6 X 1 mm, Lubrication Fitting; (A: Use Only For Kernel Processor Quick Conversion), Lubrication Fitting; As6, Lubrication Fitting; 6 X 1 mm, Lubrication Fitting; (Sub For 58m5573), Lubrication Fitting; (A: For Msl), Lubrication Fitting; (A) M6x1, Lubrication Fitting; M6 X 1, Lubrication Fitting; H1m6x1mm, Lubrication Fitting; 6 mm, Lubrication Fitting; M6 X1, Lubrication Fitting; 6 X 1 mm (For Z11381, Z11529), Lubrication Fitting; (Sub For Z52243)2
AZ***67Quick Lock Pin2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Reel Drive [01i09]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***09Lock Washer; M14, Lock Washer; 14.200 mm, Lock Washer; 14mm, Lock Washer; Ar, 14 mm, Lock Washer; 14 mm, Lock Washer; (A) 14 mm2
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Reel Lifting Cylinder [01j07]
15***58Pipe Plug; 1/8", (Code 1703), Pipe Plug; 1/8", Hex, Csk., Pipe Plug; (B: (Xxxxxx- ) Serial No. 8450-00***47; 8650-00***80) 1/8" Lower, Pipe Plug; 1/8" (For Ar50040, Re28534), Pipe Plug; 1/8" 1/8", (Sub For R21630), Pipe Plug; (Use With R67483 Or R67484), Pipe Plug; 1/8", (Diesel) (Sub For Re12310), Pipe Plug; 1/8" (Dn-03) (Sub For Re12310), Pipe Plug; 1/8", Use Without 4302, Pipe Plug; 1/8" (For Re28534), Pipe Plug; (A) (B) 1/8", Pipe Plug; 1/8", (Triple), Pipe Plug; (C: Code 1709 With Air Cleaner Mounting Pad) 1/8" (Use With T31948), Pipe Plug; 1/8" 1/8", Pipe Plug; 1/8", (Sub (2) P45808, This Application), Pipe Plug; 1/8", (Use With Re29217), Pipe Plug, Pipe Plug; 1/8", Sq. Hd., Pipe Plug; 1/8", (Sub P45808), Pipe Plug; Hex. Ctsk., 1/8" (Dh-01, Dh-02, Dh-03, Dn-01, Dn-02) (Sub For Re12310), Pipe Plug; (Use With Re46853), Pipe Plug; (A: ( -Xxxxxx) Serial No. 8450-00***46; 8650-00***79) 1/8", Pipe Plug; (A: ( -Xxxxxx) 8560-00***00; 8760-00***00; 8960-00***00) 1/8", Pipe Plug; (C) 1/8", Pipe Plug; 1/8", (Use With Aet10405), Pipe Plug, Pipe Plug; 1/8", Hex, Pipe Plug; 1/8", (Gas), Pipe Plug; (Af), Pipe Plug; 1/8", (Use With R44820), Pipe Plug; (Less Differential Lock), Pipe Plug; 1/8" (W/O Sgb), Pipe Plug; Install In Ports On Back Side Of Gauge, Pipe Plug; 1/8", (Sub For At110545), Pipe Plug; 1/8", (Sub For Re12310), Pipe Plug; 1/8" (Use With R51896) (Sub For R21630), Pipe Plug; (A: W/O Sound-Gard Body) 1/8", Pipe Plug; 1/8", (Sub For Ch13504), Pipe Plug; 1/8"-27nptf, Pipe Plug; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) 1/8" (Sub For R21630), Pipe Plug; 1/8", (Gasoline) (Sub For Re12310), Pipe Plug; (Sub For R21630), Pipe Plug; 1/8", (Use With R62836, R62838 Or R65226) (Sub For R21630), Pipe Plug; 1/8", (6 Used (A)) (4 Used (B)), Pipe Plug; 1/8" R.H., Pipe Plug; (C: Code 1703 Air Intake Short) 1/8" Hex. Ctsk., 1/8", Pipe Plug; (D: European Version) 1/8", Pipe Plug; 1/8", Up,L.H., Pipe Plug; 1/8", (Ha-D, Hb-D, Na-D) (Sub For Re12310), Pipe Plug; End Load, Pipe Plug; 1/8" (For Ar50040), Pipe Plug; 1/8", Pipe Plug; X 1/8", Pipe Plug; 1/8" (For Re28535), Pipe Plug; 1/8", (Use With R54345), Pipe Plug; 1/8", (Use With T31948), Pipe Plug; (C: Not Used In Usa Or Canada) 1/8", Pipe Plug; 1/8", (Use With R67483 Or R67484), Pipe Plug; 1/8", (1 Used For Dual)(2 Used For Triple), Pipe Plug; 3.175 mm (1/8"), Pipe Plug; 1/8" Sub For At107510 Appl, Pipe Plug; 1/8", (Sub For R21630), Pipe Plug; 1/8", Install In Ports On Back Side Of Gauge, Pipe Plug; Hex., Ctsk., 1/8", Pipe Plug; X X, Pipe Plug; (For Re28535), Pipe Plug; (A) 1/8", Pipe Plug; 1/8".Low, Pipe Plug; 1/8", (Syncro-Range) (Sub For R21630), Pipe Plug; 1/8", (Triple Only), Pipe Plug; 1/8", Low,R.H., Pipe Plug; 1/8" 1/8" (Sub For R21630), Pipe Plug; 1/8", (Sub For R21630) (3 Used With R62837 Or R65225) (2 Used With R62839), Pipe Plug; 3.175 mm, Pipe Plug; 1/8", (Ha-G, Ha-L, Hb-G, Hb-L, Hc-G, Hd-G, Na-G, Na-L) (Sub For Re12310), Pipe Plug; 1/8", (Use With T31948) (1708), Pipe Plug; 1/8" (Sub For Re12310), Pipe Plug; (B: Greaseable) 1/8" Use With R247734, Pipe Plug; 1/8", Automotive Hex. Ctsk., Pipe Plug; (A: Ah94020 Is Available As A Service Assembly For Any Final Drive Prior To Serial No.) 1/8", Pipe Plug; Hex. Ctsk., 1/8" (Gh-01, Gn-01), Pipe Plug; (A: Not Required) 1/8" (Sub For R21630), Pipe Plug; 1/8" (Pipe Fitting) (Use With Wp328895b91), Pipe Plug; 1/8", 20 Spindle Only, Pipe Plug; 1/8", (1 Used Dual) (2 Used Triple), Pipe Plug; 1/8", (Sub For R11085), Pipe Plug; 1/8", (Sub For Mg56513), Pipe Plug; Hex. Ctsk., 1/8", Pipe Plug; (D) 1/8", Pipe Plug; 1/8", (Use With Ar50040), Pipe Plug; 1/8", Pipe Plug; 1/8", Lower, Pipe Plug; 1/8" (1 Used Dual) (2 Used Triple), Pipe Plug; 1/8", End Load, Pipe Plug; 1/8", (Right Bank), Pipe Plug; (A) 1/8", (Sub For R21630), Pipe Plug; 1/8", (Restriction Indicator Hole), Pipe Plug; 1/8" (Sub For L38455), Pipe Plug; (C) 1/8", (Sub For R21630), Pipe Plug; 1/8" (Use With R211866), Pipe Plug; 1/8", Low, Pipe Plug; 1/8" (Sub For Re12310gn-01, Ln-01, Nb-G, Nb-L, Pipe Plug; 1/8", Hex. Ctsk., Pipe Plug; Hex. Ctsk, 1/8", Pipe Plug; (Use With At171400), Pipe Plug; 1/8", (Code 1709), Pipe Plug; (A), Pipe Plug; Pt 1/8, Pipe Plug; (D: Code 1709 With Air Cleaner Mounting Pad) 1/8", Pipe Plug; 1/8", (Use With R62743), Pipe Plug; 1/8" Sub For At107509 Appl, Pipe Plug; 1/8" (A), Pipe Plug; 1/8", (Sub For R21630) (Syncro-Range), Pipe Plug; 1/8", (Sub For R21630) (5 Used Gasoline And Lp-Gas) (7 Used Diesel), Pipe Plug; 1/8" (A), Hex. Ctsk., Pipe Plug; 1/8" (Use With At171400), Pipe Plug; 1/8", (5 Used Gasoline And Lp-Gas) (7 Used Diesel) (Sub For R21630), Pipe Plug; 1/8" (Sub For Ar21630), Pipe Plug; 1/8", (1703), Pipe Plug; (B: Greaseable) 1/8", Pipe Plug; 1/8", Brake, Pipe Plug; 1/8" (Sub For R21630), Pipe Plug; 3.175 mm (1/8"), Pipe Plug; 1/8" (A) (494 - 2 Used)(All Others - 8 Used), Pipe Plug; 1/8", (1 Used Triple), Pipe Plug; 1/8", (Use With Ah-02), Pipe Plug; 1/8" (For Re29217), Pipe Plug; (A: Less Rockshaft) 1/8"1
AZ***64Hydraulic Cylinder; Assembly, Incl Keys 2-8 (Ord Ar90987), Hydraulic Cylinder; Incl Keys 1-8 (Ord Az37518)1
AZ***29Hydraulic Cylinder B1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Reel Lifting Cylinder [01j08]
15***58Pipe Plug; 1/8", (Code 1703), Pipe Plug; 1/8", Hex, Csk., Pipe Plug; (B: (Xxxxxx- ) Serial No. 8450-00***47; 8650-00***80) 1/8" Lower, Pipe Plug; 1/8" (For Ar50040, Re28534), Pipe Plug; 1/8" 1/8", (Sub For R21630), Pipe Plug; (Use With R67483 Or R67484), Pipe Plug; 1/8", (Diesel) (Sub For Re12310), Pipe Plug; 1/8" (Dn-03) (Sub For Re12310), Pipe Plug; 1/8", Use Without 4302, Pipe Plug; 1/8" (For Re28534), Pipe Plug; (A) (B) 1/8", Pipe Plug; 1/8", (Triple), Pipe Plug; (C: Code 1709 With Air Cleaner Mounting Pad) 1/8" (Use With T31948), Pipe Plug; 1/8" 1/8", Pipe Plug; 1/8", (Sub (2) P45808, This Application), Pipe Plug; 1/8", (Use With Re29217), Pipe Plug, Pipe Plug; 1/8", Sq. Hd., Pipe Plug; 1/8", (Sub P45808), Pipe Plug; Hex. Ctsk., 1/8" (Dh-01, Dh-02, Dh-03, Dn-01, Dn-02) (Sub For Re12310), Pipe Plug; (Use With Re46853), Pipe Plug; (A: ( -Xxxxxx) Serial No. 8450-00***46; 8650-00***79) 1/8", Pipe Plug; (A: ( -Xxxxxx) 8560-00***00; 8760-00***00; 8960-00***00) 1/8", Pipe Plug; (C) 1/8", Pipe Plug; 1/8", (Use With Aet10405), Pipe Plug, Pipe Plug; 1/8", Hex, Pipe Plug; 1/8", (Gas), Pipe Plug; (Af), Pipe Plug; 1/8", (Use With R44820), Pipe Plug; (Less Differential Lock), Pipe Plug; 1/8" (W/O Sgb), Pipe Plug; Install In Ports On Back Side Of Gauge, Pipe Plug; 1/8", (Sub For At110545), Pipe Plug; 1/8", (Sub For Re12310), Pipe Plug; 1/8" (Use With R51896) (Sub For R21630), Pipe Plug; (A: W/O Sound-Gard Body) 1/8", Pipe Plug; 1/8", (Sub For Ch13504), Pipe Plug; 1/8"-27nptf, Pipe Plug; (B: (Xxxxxx- ) 8560-00***30; 8760-00***30; 8960-00***36) 1/8" (Sub For R21630), Pipe Plug; 1/8", (Gasoline) (Sub For Re12310), Pipe Plug; (Sub For R21630), Pipe Plug; 1/8", (Use With R62836, R62838 Or R65226) (Sub For R21630), Pipe Plug; 1/8", (6 Used (A)) (4 Used (B)), Pipe Plug; 1/8" R.H., Pipe Plug; (C: Code 1703 Air Intake Short) 1/8" Hex. Ctsk., 1/8", Pipe Plug; (D: European Version) 1/8", Pipe Plug; 1/8", Up,L.H., Pipe Plug; 1/8", (Ha-D, Hb-D, Na-D) (Sub For Re12310), Pipe Plug; End Load, Pipe Plug; 1/8" (For Ar50040), Pipe Plug; 1/8", Pipe Plug; X 1/8", Pipe Plug; 1/8" (For Re28535), Pipe Plug; 1/8", (Use With R54345), Pipe Plug; 1/8", (Use With T31948), Pipe Plug; (C: Not Used In Usa Or Canada) 1/8", Pipe Plug; 1/8", (Use With R67483 Or R67484), Pipe Plug; 1/8", (1 Used For Dual)(2 Used For Triple), Pipe Plug; 3.175 mm (1/8"), Pipe Plug; 1/8" Sub For At107510 Appl, Pipe Plug; 1/8", (Sub For R21630), Pipe Plug; 1/8", Install In Ports On Back Side Of Gauge, Pipe Plug; Hex., Ctsk., 1/8", Pipe Plug; X X, Pipe Plug; (For Re28535), Pipe Plug; (A) 1/8", Pipe Plug; 1/8".Low, Pipe Plug; 1/8", (Syncro-Range) (Sub For R21630), Pipe Plug; 1/8", (Triple Only), Pipe Plug; 1/8", Low,R.H., Pipe Plug; 1/8" 1/8" (Sub For R21630), Pipe Plug; 1/8", (Sub For R21630) (3 Used With R62837 Or R65225) (2 Used With R62839), Pipe Plug; 3.175 mm, Pipe Plug; 1/8", (Ha-G, Ha-L, Hb-G, Hb-L, Hc-G, Hd-G, Na-G, Na-L) (Sub For Re12310), Pipe Plug; 1/8", (Use With T31948) (1708), Pipe Plug; 1/8" (Sub For Re12310), Pipe Plug; (B: Greaseable) 1/8" Use With R247734, Pipe Plug; 1/8", Automotive Hex. Ctsk., Pipe Plug; (A: Ah94020 Is Available As A Service Assembly For Any Final Drive Prior To Serial No.) 1/8", Pipe Plug; Hex. Ctsk., 1/8" (Gh-01, Gn-01), Pipe Plug; (A: Not Required) 1/8" (Sub For R21630), Pipe Plug; 1/8" (Pipe Fitting) (Use With Wp328895b91), Pipe Plug; 1/8", 20 Spindle Only, Pipe Plug; 1/8", (1 Used Dual) (2 Used Triple), Pipe Plug; 1/8", (Sub For R11085), Pipe Plug; 1/8", (Sub For Mg56513), Pipe Plug; Hex. Ctsk., 1/8", Pipe Plug; (D) 1/8", Pipe Plug; 1/8", (Use With Ar50040), Pipe Plug; 1/8", Pipe Plug; 1/8", Lower, Pipe Plug; 1/8" (1 Used Dual) (2 Used Triple), Pipe Plug; 1/8", End Load, Pipe Plug; 1/8", (Right Bank), Pipe Plug; (A) 1/8", (Sub For R21630), Pipe Plug; 1/8", (Restriction Indicator Hole), Pipe Plug; 1/8" (Sub For L38455), Pipe Plug; (C) 1/8", (Sub For R21630), Pipe Plug; 1/8" (Use With R211866), Pipe Plug; 1/8", Low, Pipe Plug; 1/8" (Sub For Re12310gn-01, Ln-01, Nb-G, Nb-L, Pipe Plug; 1/8", Hex. Ctsk., Pipe Plug; Hex. Ctsk, 1/8", Pipe Plug; (Use With At171400), Pipe Plug; 1/8", (Code 1709), Pipe Plug; (A), Pipe Plug; Pt 1/8, Pipe Plug; (D: Code 1709 With Air Cleaner Mounting Pad) 1/8", Pipe Plug; 1/8", (Use With R62743), Pipe Plug; 1/8" Sub For At107509 Appl, Pipe Plug; 1/8" (A), Pipe Plug; 1/8", (Sub For R21630) (Syncro-Range), Pipe Plug; 1/8", (Sub For R21630) (5 Used Gasoline And Lp-Gas) (7 Used Diesel), Pipe Plug; 1/8" (A), Hex. Ctsk., Pipe Plug; 1/8" (Use With At171400), Pipe Plug; 1/8", (5 Used Gasoline And Lp-Gas) (7 Used Diesel) (Sub For R21630), Pipe Plug; 1/8" (Sub For Ar21630), Pipe Plug; 1/8", (1703), Pipe Plug; (B: Greaseable) 1/8", Pipe Plug; 1/8", Brake, Pipe Plug; 1/8" (Sub For R21630), Pipe Plug; 3.175 mm (1/8"), Pipe Plug; 1/8" (A) (494 - 2 Used)(All Others - 8 Used), Pipe Plug; 1/8", (1 Used Triple), Pipe Plug; 1/8", (Use With Ah-02), Pipe Plug; 1/8" (For Re29217), Pipe Plug; (A: Less Rockshaft) 1/8"2
AR***14Seal; (Sub For R69720)2
AR***87Hydraulic Cylinder; Assembly, Incl Keys 1-6, Hydraulic Cylinder; Incl Keys 1-6 (Ord Az37518)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Reel Support Arms [01i07]
11***27Cotter Pin; 5 X 28 mm, 8.4x24x2mm, Cotter Pin; 5 X 28 mm, Cotter Pin; 5 X 30 mm, Cotter Pin; 5x28mm, Cotter Pin; 5x30mm, Cotter Pin, Cotter Pin; M5 X 30, Cotter Pin; (312) 5x28mm3
12***09Lock Washer; M14, Lock Washer; 14.200 mm, Lock Washer; 14mm, Lock Washer; Ar, 14 mm, Lock Washer; 14 mm, Lock Washer; (A) 14 mm2
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm14
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Reel [01i01]
03***69Bolt; (312) M8x35, Bolt; M8 X 35 (Square Neck), Bolt; M8 X 35 (Use With R.H. Aa65315), Bolt; M8 X 35, Bolt; M8x35, Bolt; M8 X 35 M8 X 35, Bolt, Bolt; M8x20, Bolt; M8x25, Bolt; (A: For Small Grain) M8 X 35, Bolt; 8x35mm, Bolt; M8 X 35 (Use With R.H. Aa57459)0
03***71Bolt; M8x45, Bolt; M8 X 45, Bolt; M4x45, Bolt; X M8 X 45, Bolt; X M8 X 45, Bolt; 8x45mm0
11***24Pin; 4 X 36 mm 4 X 36 mm, Pin, Pin; 4x40mm, Pin; 4x36mm, Pin; 4 X 36 mm, Pin; 4 X 40 mm, Pin; M4 X 40, Pin; 4x30mm (For Z51894), Pin; 4 X 36mm (For Al56439, Al56440), Pin; 4 X 36 mm (For Al55432, Al55433), Pin; 4 X 36mm (For Al55432, Al55433), Pin; 4x36 Gb/79-2000 Zn D, Pin; (A) 4x36mm, Pin; 4 X 36mm, Pin; 5x50mm0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Return Shields [01j05]
03***68Bolt; M6 X 20 (Use With Re47041 Or Se500467), Bolt; M6 X 20, Bolt; M6x20, Bolt, Bolt; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) M6 X 20, Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6 X 20, Bolt; M6 X 20 M6 X 20, Bolt; (C), Bolt; M6 X 20 (Use With Re47042), Bolt; (A: 6076arw04 W/ "Ep9" Nippondenso) M6 X 20, Bolt; M6 X 20, Bolt; M6 X 20 (Use With Re47037), Bolt; 6x20mm6
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm23
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Short Divider And Loop Divider [01h01]
03***93Bolt; (C), Bolt; M8 X 25 (In Slot Farthest From Engine), Bolt; M8 X 25 (Use With L.H. Aa65315), Bolt; (A: With Long Feeder House) M8 X 25, Bolt; M8x35, Bolt, Bolt; (A: Syncshuttle Transmission - 5420: Sn -44***42, 5520: Sn -45***03) M8 X 25, Bolt; (B), Bolt; M8 X 25 M8x25, Bolt; M8 X 25 (Square Neck), Bolt; (A: Syncshuttle Transmission - 5220: Sn -42***29, 5320: Sn -43***72) M8 X 25, Bolt; (A: Syncshuttle Transmission - 5420: Sn 44***43-, 5520: Sn 45***04-) M8 X 25, Bolt; (B) M8 X 25, Bolt; M8 X 25 (Use With L.H. Aa57459), Bolt; M8 X 25 M8 X 25, Bolt; (A: Lateral Tilt) M8 X 25, Bolt; M8 X 25, Bolt; (A), Bolt; M8 X 25 (Not Used This Application), Bolt; 8x25mm, Bolt; M8x254
03***21Bolt; M12 X 1402
11***16Cotter Pin; 1/8"X1", Cotter Pin; 3 X 25 mm, Cotter Pin; 3x28mm (For Al41600), Cotter Pin; 3 X 20 mm (Sub For 11m1382), Cotter Pin; 3,2x28mm, Cotter Pin, Cotter Pin; 3 2x28mm, Cotter Pin; 3x28mm (For Al68930), Cotter Pin; 3 X 28mm, Cotter Pin; 3.200x28mm, Cotter Pin; (A) 3.200 X 28 mm, Cotter Pin; (A) 3,200 X 28 mm, Cotter Pin; 3.200 X 28 mm, Cotter Pin; 3 X 30 mm, Cotter Pin; 3 X 30 mm (Sub For 11m1386), Cotter Pin; 3.2x28mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x28mm, Cotter Pin; (A: For Adjustable Rear Axle) 3.200 X 28 mm, Cotter Pin; 3x30mm, Cotter Pin; 3,200 X 28 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Side Panels [01h19]
03***17Bolt; (312) M10 X 25, Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 X 25 2130, Bolt; (D: Components Of Item Dq73362) M10 X 25, Bolt; (A), Bolt; M10x26, Bolt; M10 X 25 (Sub For Er020630, Appl), Bolt; (A) M10x25, Bolt; M10 X 25 3/8" X 3" Rh (Sub For 03h1658 Or 03h2131), Bolt; (B) M10x25, Bolt; M10 X 25 (Sub For 03m7084), Bolt; M10 X 25, (Sub For 03m7088), Bolt; (312) M10x25, Bolt; M10x25, Bolt; M10 X 25, Bolt; M10 X 25 M10x25, Bolt; M10 X 25 M10 X 25, Bolt, Bolt; (A: With Long Feeder House) M10 X 25, Bolt; M10 X 25, M10x25, Bolt; (A) 10x25mm, Bolt; (A: Rice) M10 X 25, Bolt; M10 X 25 (Sub For Er020630 Appl), Bolt; 10 X 25 mm, Bolt; 10x25mm, Bolt; (B) M10 X 25, Bolt; (A: For Rice) M10 X 252
03***84Bolt; (A) M10x25, Bolt; Ar, M10 X 25, Bolt; (A) M10 X 25, Bolt; M10x25, Bolt; 10x25mm, Bolt; 10x25mm (Sub For 03m7088), Bolt; M10 X 25 |, Bolt; M10 X 25, Bolt; 10 X 25 mm, Bolt; 10x25mm (Sub For 3m***88), Bolt; (B) M10x25, Bolt; 10x25mm (Sub For 03m7088 Appl)4
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm36
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Slip Clutch For Cutting Platform Anger [01i21]
03***23Bolt; 10x110mm, Bolt; M10 X 110, Bolt; M10x1101
11***11Cotter Pin; M3,2 X 15, Cotter Pin; 3x15mm, Cotter Pin, Cotter Pin; 3.200 X 14 mm, Cotter Pin; 3 X 15 mm, Cotter Pin; 3x15, Cotter Pin; 3,2x14mm, Cotter Pin; M3 X 15, Cotter Pin; (A) 3 X 15 mm, Cotter Pin; 3x15 mm2
11***39Cotter Pin; 6 X 50 mm |, Cotter Pin; 6.300 X 45 mm, Cotter Pin; 6 X 50 mm, Cotter Pin; 6x50mm, Cotter Pin; M8, Cotter Pin; 6 X 50 mm (Sub For 11m1416), Cotter Pin; 6,3 X 45 mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Split Bell Crank-Knife Drive [01h07]
11***14Cotter Pin; 3,2 X 22mm, Cotter Pin, Cotter Pin; 3x25mm, Cotter Pin; (A) 3,2x22mm, Cotter Pin; 3,2x22mm, Cotter Pin; 3.200 X 22mm, Cotter Pin; 3,2 X 22 mm, Cotter Pin; 3.200 X 22 mm, Cotter Pin; 3x22mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; 3 2x22mm, Cotter Pin; 3 X 25 mm, Cotter Pin; M3 X 25, Cotter Pin; 3,2x25mm1
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)4
14***31Nut; M6, Nut; M12 (D), Nut; M12, Nut; M12m, Nut; 12 mm, Nut; M12 (W/ E63932), Nut; 12 mm (W/ E63932) Key 3, Nut; M12 (For Z45182), Nut; 3/8", Nut; (A: For Exportation) M12, Nut; 12 mm (W/ Dc18663), Nut; M14, Nut; M12, M12, Nut; M12 (Sub For 14m7042) |, Nut; (A) (B) (C), Nut; Ar, M12 (Sub For 14m7042), Nut; (C: For Commandcenter) M12, Nut; 14 mm, Nut; (A) (B) (C) M12, Nut; M12 (Sub For 14m7042), Nut; M12 M12, Nut; 12 mm (W E63932) Key 3, Nut; M12 (W/ E63930), Nut; (A) M12, Nut; 12mm, Nut, Nut; Ar, M12, Nut; M12, (312) M12, Nut; M12 |, Nut; M12, (312), Nut; M12 (W/ Dc18663), Nut; M12 Sub For 14m7275, Nut; 12x1,75, Nut; (A), Nut; M12 (Sub For 14m7066), Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M12, Nut; M12, M8x80, Nut; (C) M12, Nut; M12, Rh, Nut; 12 mm (W/ E63930), Nut; M12 (W/ Dc18661)4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Variable Reel [01i13]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x206
03***83Bolt; (B) M12 X 35, Bolt; (312) M12x35, Bolt, Bolt; M12 X 35, Bolt; M12x35, Bolt; 12 X 35mm, Bolt; 12x35mm, Bolt; M8x25, Bolt; M12x35 (Sub For 03m7089), Bolt; M12 X 35 (W/ Dc18663), Bolt; 12 X 35 mm (W/ Dc18663), Bolt; M12 X 50, Bolt; M12 X 35 (W/ Dc18661)1
03***26Bolt; (A) M12x35, Bolt; M12 X 35, Bolt; M12x35, Bolt; 12x35mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 48 Cutting Platform : Wearing Plates [01h21]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm16
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm13
14***29Nut; M8, Nut; (A) 8mm, Nut; 950, M8, Nut; M8, 6,6x12,5x1,6, Nut; (A) M8 (Sub For 14m7137), Nut; (A: Area Counter Support, R.H. Side) M8, Nut; M8 Includes Dq11813 And Dq12055, Nut; M6, Nut; (A) ,M8, Nut; M8 M8x16, Nut; (A) M8, Nut; M8, 8, Nut; (C) M8, Nut; X M8, Nut; X M8, Nut; M8, (312), Nut; M8 (Sub For Sb12293201/0), Nut; Ar, M8, Nut; (A: Rice/Corn) M8, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8, Nut; 8mm, Nut; 960, M8, Nut; M8 (Sub For 14m7137), Nut; M8 (Sub For 14m6825), Nut; 970, M8, Nut; (B), Nut; M8 Use With Az17518, Nut; Lh, M8, Nut; M8, M, Nut; M8 (For Al63397), Nut; M8, M8, Nut; M8 (Sub For 14m7137, 14m7140), Nut; M8, Use W/ Az17516 - Az17518, Nut; M8, (Use With Az17518), Nut; M9, Nut; (B) M8, Nut; 5/16" 8mm, Nut; 930, M8, Nut; (B: Without Lateral Tilt) M8, Nut; M8 |, Nut; M8, M12x35, Nut; (A: Rice Version) M8, Nut; M10, Nut; M8, M8, 8mm, Nut; Ar, Lh, M8, Nut; 8x1,25mm, Nut; M8, (10.9), Nut; 8 mm, Nut; Ar M8, Nut; M8 X 20, Nut; 940, M8, Nut; M8, 940w/ 343, Nut; 8mm (Sub For 14m7137), Nut; M8, 8x7mm, Nut; M8, (312) M8, Nut; (A: For Usa Only) M8, Nut; M8, 8mm, Nut; M8 M8, Nut, Nut; M8, (312) M10, Nut; (A) (B) M8, Nut; (A: Discharge Spout (High Arc)) M8, Nut; Ar L.H. M8, Nut; M8, (B), Nut; (B: For Usa Only) M816
See all parts with full part numbers in Heavy Parts AI →
50 Feeder House
John Deere : 940 - Combine : 50 Feeder House : Chain Guide, Long Feeder Conveyor [02a11]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x204
03***98Bolt; M10x20, Bolt; M10x35, Bolt; M10 X 35 (Square Neck) Lh Stop (955 Tractor), Bolt, Bolt; M10 X 35, Bolt; (312), Bolt; 10x35mm, Bolt; (A) M10 X 35, Bolt; M10 X 35 (Sub For E92371), Bolt; (Sub For E92371), Bolt; (A: For Impeller Machine)4
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm23
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 50 Feeder House : Cutting Platform - Drive Shaft [02a17]
03***89Bolt; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M12 X 30, Bolt; Ar, M12 X 30, Bolt; M12 X 30 M12 X 30, Bolt, Bolt; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12 X 30, Bolt; (312), Bolt; 12x30mm, Bolt; M12 X 30, Bolt; M12x30 (Sub For 19m7285), Bolt; (A: For 5e Series Tractors) M12 X 30 Lh, Bolt; M12 X 30 Lh, Rh, Bolt; M12 X 30 (W/ Dc18661), Bolt; (A: For 1, 81 Meter Pickup) M12 X 30, Bolt; M12x30, Bolt; (A) M12 X 30, Bolt; (A: For 2, 20 Meter Pickup) M12 X 30, Bolt; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12 X 30, Bolt; 12 X 30 mm (W/ E63930), Bolt; 3/8"X1", Bolt; M12 X 30 (W/ E63930)1
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm10
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 50 Feeder House : Feeder Conveyor Chain [02a19]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm0
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M60
14***66Nut; M8 (Sub For Er022407, Appl), Nut; (A: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- )) (B: Starting From Series Number 2115 (07***01- ), 2117 (07***01- )) M8, Nut, Nut; M8 (Sub For Er022047 Appl), Nut; M8 2126, Nut; M8 (Sub For 14m7298), Nut; M8, No Usado, Nut; M8 (A), (B), Nut; 10.5x21x2mm, Nut; (A) M8, Nut; (A: 9550 (69***01 - ) 9550sh (69***01 - )) M8, Nut; (A: For Msl) M8, Nut; (B: With Command Arm) M8, Nut; (A) (C) M8, Nut; (B: W/Cab) M8, Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) M8, Nut; (C: With Command Arm) M8, Nut; M8 Not Illustrated, Nut; (A: Only For 50 Km/H) M8, Nut; (B: With Hydraulic Cab Suspension (Hcs)) M8, Nut; (B: For Tractors Without Cab) M8, Nut; (D: Components Of Item Dq73362) M8, Nut; (B: 9550 (70***01- ) 9550sh (70***01- )) M8, Nut; (A: For Pickup 1, 81 M) M8, Nut; (A: Only For North America And Japan) M8, Nut; (A: Region Ii Only) M8, Nut; Ar, M8, Nut; M8 (A), Nut; (A: For 2 Functions) (B: For 2 Functions +1) (C: For 3 Functions) M8, Nut; M8 2113, Nut; (C: (5410) -34***48 (5510) -35***34) M8, Nut; (A: Feeder House Lateral Tilt) M8, Nut; (A: For 9650 Sts (69***01- ) & 9750 Sts (69***01- )) M8, Nut; (B: With Electronic Speed Control) M8, Nut; (C: (5410) -34***47 (5510) -35***27) M8, Nut; (E: Up To Series 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) (F: Up To Series 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; M8 (A) (B), Nut; (D) M8, Nut; (A: For Rotor-Type Pickup) M8, Nut; M8, With Single Auger With Power Deflector, Nut; (C: Only For 2.0 M Rotor Type Pickup) M8, Nut; M8 Din985, Nut; M8, M8, Nut; (A: For Machines With Hydraulic Brake System) M8, Nut; (A: Without The Largest Diameter Starter Roll) M8, Nut; (C: Also For Super Narrow Version) M8 (Sub For Er022407 Appl), Nut; (A: For Pickup Heavy Duty) M8, Nut; (B: For 6505 Tractors) M8, Nut; M8 (E64256), Nut; M8, (312) M8, Nut; (E: With Electronic Speed Control) M8, Nut; M8 M8 X 1.25, Nut; M8, Nut; (B: For 2 Functions +1) (D: For Gear Shift Switches) M8, Lock Nut; M8, (Sub For J950010, This Application), Nut; M8 (Sub For 14m7273), Nut; 8 mm, Nut; (A) (B) M8, Nut; M8 M8, Nut; M8 (Sub H137328), Nut; (A: Rice Version) M8, Nut; M8 (Sub For L36292 Appl), Nut; M8, (Sub For Es10350), Nut; M10, Nut; M8 (Ord Dc50810), Nut; (A: At170191 Kit, Contains Clamps, Spacer And Hardware) (B: At170190 Kit, Contains Clamps, And Hardware) M8, Nut; (B: For 9650 Sts (70***01- ) & 9750 Sts (70***01- )) M8, Nut; (C) M8, Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M8 M8, Nut; (A: Used In 5615 Hc Too) M8, Nut; M8, Serie 600 Ct 20, Ct 30, Nut; M8 2130, Nut; (A) M8 (Sub For E64256), Nut; M8, 11x21x2mm, Nut; M8 (Sub For Er022407 Appl), Nut; M8 (A) (Sub For Es10350), Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; (A: For 6205 Tractors) (C: Not For Msl) M8, Nut; (C: For 3 Functions) (D: For Gear Shift Switches) M8, Lock Nut; M8, Nut; (A: Mexico) (B: Turkey) M8, Nut; (A: For Fork-Type Pickup) M8, Nut; (A: Used With Optional Double Twine Arm.) M8, Nut; (A: Starting From Series Number 2113 (07***01- ), 2115 (07***01- ), 2117 (07***01- )) (B: Starting From Series Number 2122 (07***01- ), 2126 (07***06- )) M8, Nut; (B: For Pickup 1.41 M) M8, Nut; M8, (312), Nut; (A: For 2 Functions) (B: For 2 Functions + 1) M8, Nut; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M8, Nut; M8 (Use With T129534), Nut; (A: Only For Pick Up 2 M With Precutter) M8 (Ord Dc50574), Nut; M8 (Sub For Er022408 Appl), Nut; (C: With Hydraulic Cab Suspension (Hcs)) M8, Nut; (B: Without Lateral Tilt) M8, Nut; (C: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- ), 2115 (07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M8, Nut; 8mm, Nut; M8 |, Nut; (A: 5303 ( -Xxxxxx), 5403 ( -00***62).) M8, Nut; M4x6, Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; M8 (Sub For At265058), Nut; (B) M8, Nut; M8 M8g, Nut; M8 (Export), Nut; M8 (Sub For E64256), Nut; M8 Lh, Rh, Nut; (A: Used In 5625hc Tractor Too) M8, Nut; (A: 2126, 24 Rows) M8, Nut; (B: Low Profile Cab) M8, Nut; (A: For 1, 81 Meter Pickup) M8, Nut; M8 W/ Hcs-Cab, Nut; M8 (B), Nut; M8 (Sub For E64259), Nut; M8 (Sub For Er024805 Appl), Nut; M8 (Sub For Er047321 Appl), Nut; (A: Components Of Item Dq73362) M8, Nut; (A: For 6205 Tractors) M8, Nut; M8 Nylstop, Nut; Ar M8, Nut; (B: For Electronic Foot Throttle) M8, Nut; (A) 8mm |, Nut; (A: Hi-Crop) M856
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 50 Feeder House : Feeder Conveyor Drive Shaft [02a13]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm6
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm12
14***29Nut; M8, Nut; (A) 8mm, Nut; 950, M8, Nut; M8, 6,6x12,5x1,6, Nut; (A) M8 (Sub For 14m7137), Nut; (A: Area Counter Support, R.H. Side) M8, Nut; M8 Includes Dq11813 And Dq12055, Nut; M6, Nut; (A) ,M8, Nut; M8 M8x16, Nut; (A) M8, Nut; M8, 8, Nut; (C) M8, Nut; X M8, Nut; X M8, Nut; M8, (312), Nut; M8 (Sub For Sb12293201/0), Nut; Ar, M8, Nut; (A: Rice/Corn) M8, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8, Nut; 8mm, Nut; 960, M8, Nut; M8 (Sub For 14m7137), Nut; M8 (Sub For 14m6825), Nut; 970, M8, Nut; (B), Nut; M8 Use With Az17518, Nut; Lh, M8, Nut; M8, M, Nut; M8 (For Al63397), Nut; M8, M8, Nut; M8 (Sub For 14m7137, 14m7140), Nut; M8, Use W/ Az17516 - Az17518, Nut; M8, (Use With Az17518), Nut; M9, Nut; (B) M8, Nut; 5/16" 8mm, Nut; 930, M8, Nut; (B: Without Lateral Tilt) M8, Nut; M8 |, Nut; M8, M12x35, Nut; (A: Rice Version) M8, Nut; M10, Nut; M8, M8, 8mm, Nut; Ar, Lh, M8, Nut; 8x1,25mm, Nut; M8, (10.9), Nut; 8 mm, Nut; Ar M8, Nut; M8 X 20, Nut; 940, M8, Nut; M8, 940w/ 343, Nut; 8mm (Sub For 14m7137), Nut; M8, 8x7mm, Nut; M8, (312) M8, Nut; (A: For Usa Only) M8, Nut; M8, 8mm, Nut; M8 M8, Nut, Nut; M8, (312) M10, Nut; (A) (B) M8, Nut; (A: Discharge Spout (High Arc)) M8, Nut; Ar L.H. M8, Nut; M8, (B), Nut; (B: For Usa Only) M86
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 50 Feeder House : Feeder Conveyor Drum (Lower) [02a15]
11***37Cotter Pin; 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 36 mm, Cotter Pin; 6 X 36 mm, Cotter Pin; 6,3x40mm, Cotter Pin; 6,6 X 36 mm, Cotter Pin; 6 3x36mm, Cotter Pin; 6,3 X 36 mm, Cotter Pin; 6 3x40mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin; 6,3x36mm, Cotter Pin; M6 X 40, Cotter Pin; 6,6x36mm, Cotter Pin; 6x40mm, Cotter Pin; 6 6x36mm, Cotter Pin; 6,3 X 40 mm2
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm12
12***17Lock Washer; 16 M, Lock Washer; 16 mm, Lock Washer; (A) 16mm, Lock Washer; (B) 16mm, Lock Washer; 16mm, Lock Washer; M16, Lock Washer; 16.200 mm, Lock Washer, Lock Washer; Ar, 16 mm, Lock Washer; (A) 16 mm, Lock Washer; Fwd, Lock Washer; 16mm (Sub For 12m1629), Lock Washer; 940, 16 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 50 Feeder House : Feeder Conveyor-Housing Short [02a09]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x204
03***78Bolt; M16 X 75, Bolt; 16x75mm, Bolt; (A) M16x75, Bolt; M16x75, Bolt; M16 X 90, Bolt; (A) M16 X 751
03***41Bolt; (312)M12x55, Bolt; M12 X 55, Bolt; Ar, M12 X 554
See all parts with full part numbers in Heavy Parts AI →
51 Cutting Platform Drive Shaft
John Deere : 940 - Combine : 51 Cutting Platform Drive Shaft : Cutting Platform - Drive Shaft (Corn) [02a21]
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm3
14***40Nut; M10 |, Nut; M8 (Sub For 14m7137), Nut; M16, Nut; 10mm, Nut; (Sub For 14m7039), Nut; M8, Nut; 10mm (Sub For 14m7039), Nut; M10, (312) M10, Nut; 10 mm, Nut; M10, 3,2x20mm, Nut; (C) M10, Nut; Ar, 10mm, Nut; M10, (312), Nut; (A: For Rice) M10, Nut; M10, Nut; (B) 8 mm, Nut; Ar, M10, Nut; M10 (Ord W/Sb12585100/0), Nut; M10, M10x25, Nut; 12mm, Nut; (D: Components Of Item Dq73362) M10, Nut; M10 (Sub For 14m7273), Nut; M10 Lh, Nut; (A: Rice Version) M10, Nut; (A: W/ Lateral Tilt) M10, Nut, Nut; (A) M8, Nut; M10, M10, Nut; M10, M12x30, Nut; M10, 11x21x2mm, Nut; M10 (Sub For 14m7039), Nut; (A: Rice) M10, Nut; (A) 10mm, Nut; (A) M10, Nut; M10x50, Nut; M10 M10, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10, Nut; 10x1,5mm, Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M10, Nut; (A: No Longer Required) M10, Nut; (B) M103
19***68Bolt; (C: (-Xxxxxx) Tractor Serial No. 8560-00***00; 8760-00***00; 8960-00***00) M10 X 30, Bolt; M10 X 30 (A), (B), Bolt; M10 X 30, Bolt; M10 X 30 M10 X 30, Bolt; M10 X 30 Rh Drop-Down, Bolt, Bolt; M10 X 30 M10x30, Bolt; M10 X 30 (A), (B), (Sub For Ch17135), Bolt; M10 X 30, (Sub For Mg508076), Bolt; 10x30mm, Bolt; Ar, M10 X 30, Bolt; (A: With Creeper Transmission) M10 X 30, Cap Screw; M10 X 30, Bolt; M10 X 30 (Sub For 19m7100), Bolt; (A) (B) M10 X 30, (Sub For Ch17135), Bolt; M10, Bolt; 10x80mm, Bolt; (A: R.H. Drop-Down) M10 X 30, Bolt; (D: (Xxx-) 8560-00***01;8760-00***01;8960-00***01) M10 X 30, Bolt; (D: With Long Feeder House) M10 X 30, Bolt; M10 X 30 (8.8), Bolt; (A: Mechanical Front Wheel Drive) M10 X 30, Bolt; (C: Starting From Series Number 2109 (07***01-), 2111 (06***01-), 2113 (06***04-), 2115 (06***02-)) (D: Starting From Series Number 2117 (06***02-), 2122 (06***01-), 2126 (06***06-)) M10 X 30 2130, Bolt; (A: 7220 (01***51-)) M10 X 30, Bolt; M10 X 30 (A) (B) (C), Bolt; M10 X 30 (Sub For 19m7102), Bolt; M10 X 30 L.H. Drop-Down, Bolt; (B: L.H. Drop-Down) M10 X 30, Bolt; M10 X 30 (930d-110 Used; 936d-120 Used), Bolt; M10x30, Cap Screw; M10 X 30, (Sub For T116882), Bolt; M10 X 30/28 (Sub For 19m7102), Bolt; (C) M10 X 30, Bolt; (A: W/ Cab) M10 X 30, Bolt; M10 X 30 M10, Bolt; M6x30, Bolt; (C: Up To Series 2111 (-13397), 2113 (-06***03), 2115 (-06***01)) (D: Up To Series 2117 (-06***01), 2122 (-13423), 2126 (-06***05)) M10 X 30, Bolt; M12x25, Bolt; M10 X 30, (312) M10x30, Bolt; M10 X 30, M10, Bolt; M10 X 30, Rh, Bolt; M10 X 30 (Use With At117390), Bolt; M10 X 30, Grade "8" Shear, Bolt; M10 X 30, R.H., Bolt; M10 X 30, (Use With At117390), Bolt; (A: For 7750) M10 X 30, Bolt; M10 X 30 (A), (Sub For Ch17135), Bolt; (A: For 7300, 7400, 7500) M10 X 30, Bolt; (Sub For Ch12028) (Df105), Bolt; M16 X 30, Bolt; M10 X 30 (A) (Sub For Ch17135), Bolt; M10 X 30 (A), Bolt; (A: (-Xxxxxx) 8560-00***42; 8760-00***18; 8960-00***60) M10 X 30, Bolt; (A: With Cab Only) M10 X 30, Bolt; (B: With Creeper Transmission) M10 X 30, Bolt; (B) M10 X 30, Bolt; 10 X 30mm, Bolt; M10x30 R.H., Bolt; (A: For 7350 7450, 7550) M10 X 30, Bolt; M10 X 30, L = 57 Incl Key 32, 33, Bolt; (A: Use Only With Electro-Hydraulic Power Take-Off) M10 X 30, Bolt; M10 X 30 Din933 (8.8) Zn, Bolt; (Use With At117390), Bolt; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) M10 X 30 (Hs, Head Marked 10.9), Bolt; M10 X 30, (Sub For Ch12028), Bolt; M10 X 30, (B), Bolt; M10x30mm, Bolt; M10 X 30 R.H. Drop-Down, Bolt; M10 X 30 Lh, Rh, Bolt; (A) M10 X 30, Bolt; (D: W/ Long Feeder House) M10 X 30, Bolt; M10 X 30 Rh, Bolt; (A: With Front Loader Only) M10 X 30, Bolt; M10 X 30/28 (Sub For 19m3146), Bolt; (A: No Longer Required) M10 X 30, Bolt; M10x30, Rh, Bolt; (A) (B) M10 X 30, Bolt; M10 X 30 Lh Drop-Down, Bolt; M10 X 30, 10mm, Bolt; M6 X 30, Bolt; M10 X 30 (A)(Sub For Ch17135), Bolt; M10 X 30, (6000 Series Only) (Used With 2.29 M (7.5 Ft) Harness), Bolt; M10 X 30, (Sub For Ch17135), Bolt; (Sub For Ch12028), Bolt; Ar, 10x30mm, Bolt; M10 X 30 (Sub For 17m7154), Bolt; M10 X 30 (Sub For 19m3146), Bolt; M10 X 30 Auxiliary Finger, Bolt; M10 X 30 (For 25' Euro), Bolt; (A) M10x30, Bolt; M10 X 30 (925d-72 Used; 930d-84 Used), Bolt; M10 X 30 (European), Bolt; M10 X 30, M10 X 30, Bolt; (A: Without R.H. Step) M10 X 30, Bolt; M10 X 30, M10x301
See all parts with full part numbers in Heavy Parts AI →
53 Feeder House Drive
John Deere : 940 - Combine : 53 Feeder House Drive : Tension Pulley For Grain Feeder Conveyor [02a24]
03***89Bolt; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M12 X 30, Bolt; Ar, M12 X 30, Bolt; M12 X 30 M12 X 30, Bolt, Bolt; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12 X 30, Bolt; (312), Bolt; 12x30mm, Bolt; M12 X 30, Bolt; M12x30 (Sub For 19m7285), Bolt; (A: For 5e Series Tractors) M12 X 30 Lh, Bolt; M12 X 30 Lh, Rh, Bolt; M12 X 30 (W/ Dc18661), Bolt; (A: For 1, 81 Meter Pickup) M12 X 30, Bolt; M12x30, Bolt; (A) M12 X 30, Bolt; (A: For 2, 20 Meter Pickup) M12 X 30, Bolt; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12 X 30, Bolt; 12 X 30 mm (W/ E63930), Bolt; 3/8"X1", Bolt; M12 X 30 (W/ E63930)1
11***14Cotter Pin; 3,2 X 22mm, Cotter Pin, Cotter Pin; 3x25mm, Cotter Pin; (A) 3,2x22mm, Cotter Pin; 3,2x22mm, Cotter Pin; 3.200 X 22mm, Cotter Pin; 3,2 X 22 mm, Cotter Pin; 3.200 X 22 mm, Cotter Pin; 3x22mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; 3 2x22mm, Cotter Pin; 3 X 25 mm, Cotter Pin; M3 X 25, Cotter Pin; 3,2x25mm1
11***19Cotter Pin; 4x18mm (Sub For 11m7013), Cotter Pin, Cotter Pin; 4x20mm, Cotter Pin; 4x18 mm, Cotter Pin; 4 X 18 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; 4x18mm (Sub For 11h216), Cotter Pin; 4x18mm, Cotter Pin; 4 X 18mm, Cotter Pin; 4x18mm (Sub For 11h216, 11m7013), Cotter Pin; 4 X 8mm, Cotter Pin; (A) 4x18mm1
See all parts with full part numbers in Heavy Parts AI →
55 Separator Drive
John Deere : 940 - Combine : 55 Separator Drive : Flat Belt Guide [02b02]
11***12Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm0
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm5
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm6
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 55 Separator Drive : Tachometer [02b06]
14***48Nut; M10, M10 X 1, For Re68695, Nut; M10, Nut; M10, (For Re508317), Nut; M10 Sub For 14m7273; Appl, Nut; M10 X 1, For Re68695, Nut; M10 X 1, Nut; M10, For Re68695, Nut, Nut; 10 X 1 mm, Nut; M10x1, Nut; M10 M10 X 1, Nut; M10 (Sub For Er047693 Appl), Nut; M10 M10, Nut; M10, Nut; M10 M10x11
14***61Nut; M22, Nut; M22 X 1,5, Nut; M22x1,51
24***28Sheave; 10.500 X 20 X 2 mm (Use With Ah205124, Ah205125, Ah205122 Or Ah205123) (Used For Leveling Concave), Sheave; 10,5x21x2mm (Sub For 24m1584), Sheave; 10,500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Use With Ah205119, Ah205120, Ah205117 Or Ah205118)(Concave Leveling), Sheave; 10 mm, Washer; 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Aw22434), Sheave; 10.3 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er023123 Appl), Sheave; 10.5 X 21 X 2mm, Sheave; (A: Fourth Step Option) 10.500 X 20 X 2 mm, Sheave; 11x21x2mm, Sheave; 10.500 X 20 X 2 mm, (Twin Swath), Sheave; 10.500 X 20 X 2 mm 10, 5 X 21 X 2 mm, Sheave; 10.500 X 20 X 2 mm 10.5 X 21 X 2mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er047323 Appl), Sheave; (A: For Hillmaster Only) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For J253110 Or A590110), Sheave; (A: With Hydraulic Cab Suspension (Hcs)) 10.500 X 20 X 2 mm, Washer; 10.500 X 20 X 2 mm, (Sub For Ffsb107142), Sheave; (B: Without Sound Gard Body) 10.500 X 20 X 2 mm, Sheave; 10,5x24x2mm, Sheave; 10.500 X 20 X 2 mm (Sub For 24h1305), Sheave; (A: Collarshift Transmission (5220) Sn -42***10 (5320) Sn -43***06) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm 10.5 X 20 X 2mm, Sheave; (A: Used In 5615 Hc Too) 10.500 X 20 X 2 mm, Sheave; (E: (Xxxxxx-) 7600-00***65; 7700-00***59; 7800-00***05) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079"), Sheave; (A: With 12v, 110ah Battery) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For 24m7040), Sheave; 10.500 X 20 X 2 mm Nlr, Sheave; (A: (6068hn053)) 10.500 X 20 X 2 mm, Sheave; 10.5x21x2.0mm, Sheave; (B: Upto Sr.No. 5410-Xxxxxx, 5610-Xxxxxx.) 10.500 X 20 X 2 mm Rh, Sheave; 10.500 X 20 X 2 mm M6x16, (Hs=10.9), Sheave; (B) 10.500 X 20 X 2 mm, Sheave; (A) 10.5mm, Sheave; 10.5 X 21 X 2.0mm, Sheave; 10,3mm, Sheave; (A: Adjustable Armrest) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er023050 Appl), Sheave; 10,5 X 21 X 2 mm, Sheave; 10.500 X 20 X 2 mm (2 Per Tine), Sheave; 11 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm M10 X 50 (10.9), Sheave; 10,5 X 21 X 2, Sheave; (A: With Extra Hydraulic Oil Reservoir) 10.500 X 20 X 2 mm, Sheave; 10.5x21mm, Sheave; 10,5x21x2,5mm, Sheave; 10.500 X 20 X 2 mm (Nlr), Sheave; 10.500 X 20 X 2 mm Sub For A590110, Sheave; (B) 10,5x21x2mm, Sheave; 10,5mm, Sheave; 10 5mm, Sheave; 10.5 X 21 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er046618 Appl), Sheave; 10,500 X 20 X 2mm, Sheave; 10.500 X 20 X 2 mm (Hi-Crop), Sheave; 10.500 X 20 X 2 mm (Use With Ah205119, Ah205120, Ah205117 Or Ah205118), (Use For Leveling Concave), Sheave; 10mm, Sheave; 10.500 X 20 X 2 mm, (6 Used For 680), Sheave; 10,5 X 21mm, Sheave; (A: Used In 5425hc Tractor Too) 10.500 X 20 X 2 mm, Sheave; 10,5,21x2mm, Sheave; 10.500 X 20 X 2 mm, (Sub For 24h1305, 24m7040), Sheave; 10.500 X 20 X 2 mm (Sub For Er023054, Er023050 Appl), Sheave; 10.500 X 20 X 2 mm (Sub R73639), Washer; 10.500 X 20 X 2 mm, (Sub For Ffsb107142 And A590110), Sheave; 10.500 X 20 2 mm, Sheave; (F: Center Section) 10.500 X 20 X 2 mm 15-Inch 23-, 24-, 31-, And 32-Row, Sheave; (A: For Tractor With 2 Steps, On The Left And On The Right) 10.500 X 20 X 2 mm, Sheave; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.500 X 20 X 2 mm, Sheave; (A) 10,5mm, Sheave; 10.500 X 20 X 2 mm, (Use With Ah205124, Ah205125, Ah205122 Or Ah205123) (Use For Leveling Concave), Washer; 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079"), Sheave; 10.5x21x2, Sheave; (B) 10,5 X 20 X 2 mm, Sheave; 10.5mm, Sheave; 10,5 X 20 X 2,0mm, Sheave; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For 12m7096), Sheave; 6,6mm, Sheave; (C: (5210) -32***21 (5310) -33***91) 10.500 X 20 X 2 mm, Sheave; (A: On Serial 622 (07***67-07***71), 625 (07***49-07***52), 630 (07***01-07***15)) 10.500 X 20 X 2 mm, Sheave; (A) 10,5 X 20 X 2 mm, Washer; (Sub For A590110), Sheave; (A: Fuel Tank (30.6 Gallon)) 10.500 X 20 X 2 mm, Sheave; (A), Washer; (Sub For Ffsb107142), Sheave; (A: W/3 Scv W/Hitch W/Power Take-Off) 10.500 X 20 X 2 mm, Sheave; (A: No Longer Required) 10.500 X 20 X 2 mm, Sheave; (A: Starting From Series Number 618 (08***63-), 620 (08***97-)) (B: Starting From Series Number 622 (08***62-), 625 (08***98-), 630 (08***55-)) 10.500 X 20 X 2 mm, Sheave; (A) 10.500 X 20 X 2 mm, Sheave; 10,5 X 21 X 2mm, Sheave; 6,6 mm, Sheave; 10.500 X 20 X 2 mm, 10.5x21x2mm, Sheave; 10.500 X 20 X 2 mm 10.5x21x2mm, Sheave; 10.500 X 20 X 2 mm, (Sub For 24h1323, 24m7040), Sheave; 10.500 X 20 X 2 mm (02***02 Nla), Sheave; 10.500 X 20 X 2 mm (Sub For A590110), Washer; 10.500 X 20 X 2 mm, (Sub For A590110), Sheave; 10.500 X 20 X 2 mm 9000, Sheave; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 10.500 X 20 X 2 mm, Sheave; 10,5 X 20 X 2, Sheave; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.500 X 20 X 2 mm, Sheave; 10,5x21x2mm, Sheave; (A) 10.5x21x2mm, Sheave; 10,5 X 20 X 2mm, Sheave; (C) 10.5x21x2mm, Sheave; (C: (5210) -32***23 (5310) -33***88) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (A), Sheave; (B: (6068hn056)) 10.500 X 20 X 2 mm, Sheave; B10,5, Sheave; M10,5, Sheave; 10.500 X 20 X 2 mm, (Sub For Et11539), Sheave; 10.500 X 20 X 2 mm 21 X 10 mm, Sheave; 10.500 X 20 X 2 mm M10, Sheave; (A) 10,5 mm, Sheave; 10.5x21x2mm (Sub For 24h1305, 24m7040), Sheave; (D) 10.500 X 20 X 2 mm, Sheave; Ar, 10,5 mm, Sheave; (A: For Tractor With 3 Steps, On The Left And On The Right) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Used For Leveling Concave), Sheave; 10.500 X 20 X 2 mm (Use With Ah205119, Ah205120, Ah205117 Or Ah205118) (Used For Leveling Concave), Sheave; 10.500 X 20 X 2 mm (Sub A4624), Sheave; 10.500 X 20 X 2 mm 21 X 10mm, Sheave; (A) (B) 10,5 X 20 X 2 mm, Sheave; (A) 10.500x20x2mm, Sheave; (D: Components Of Item Dq73362) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm Sub For A590910, Sheave; 10.500 X 20 X 2 mm 14-Tooth, Sheave; 10.500 X 20 X 2 mm Lh, Washer; 10.500 X 20 X 2 mm, (Sub For Ffsb107142 Or A590110), Sheave; 10.500 X 20 X 2 mm (Use With Ah205124, Ah205125, Ah205122 Or Ah205123) (Use For Leveling Concave), Sheave; (C: W/O Hitch) 10.500 X 20 X 2 mm, Sheave; (A) 10,5 X 21 X 2mm, Sheave; 10", 5x21x2mm, Sheave; 0.413" X 0.787" X 0.079", Sheave; 10.500 X 20 X 2 mm 10, 5 X 20 X 2mm, Sheave; (A) 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079"), Sheave; 10.500 X 20 X 2 mm (Hi-Crop) (Sub R73639), Sheave; 10.500 X 20 X 2 mm (Sub For Er023074), Sheave; (A: Illustrated) 10.500 X 20 X 2 mm, Sheave; (A) 10,5x21x2mm, Sheave; 10.500x20x2mm, Sheave; (C: United Kingdom, France, Germany And Sweden) 10.500 X 20 X 2 mm, Sheave; 10,5 mm, Sheave; (A: On Series 616 (41386-), 618 (41386 - 08***62), 620 (41386 - 08***96)) (B: On Series 622 (41386-07***66), 625 (41386-07***48), 630 (41386-07***00)) (C: On Series 622 (07***72-08***61), 625 (07***53-08***97), 630 (07***16-08***54)) 10.500 X 20 X 2 mm, Sheave, Sheave; 10.500 X 20 X 2 mm (Sub For Er023071 Appl), Sheave; (K) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Use With Ah205119 Or Ah205120) (Use For Leveling Concave), Sheave; 10.500 X 20 X 2 mm (Use With Lva16719), Sheave; (B: With Draft Sensing) 10.500 X 20 X 2 mm, Washer; 10.500 X 20 X 2 mm, (Sub For Ffsb106133), Sheave; (B: 2 Used Per Tine) 10.500 X 20 X 2 mm, Sheave; 10.5x21x2mm (Sub For 24m1584), Sheave; 10.500 X 20 X 2 mm Manual Fore/Aft Only, Sheave; 2x10,5x21mm, Sheave; 10.500 X 20 X 2 mm (Use With 19m7402), Sheave; (A) 10,500 X 20 X 2 mm, Sheave; 10 5x21x2mm, Sheave; (A: For 43.5 Gallon (165l) Fuel Tank) 10.500 X 20 X 2 mm, Sheave; (D: (Xxx-) 8560-00***01;8760-00***01;8960-00***01) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm, (Use With Ah205119, Ah205120, Ah205117 Or Ah205118) (Use For Leveling Concave), Sheave; (Sub For L18519), Sheave; (A: Without R.H. Step) 10.500 X 20 X 2 mm, Sheave; (Sub For 24h1305), Sheave; M10, Sheave; 10,500x20x2mm, Sheave; 10.500 X 20 X 2 mm (Use With Ah205119, Ah205120, Ah205117 Or Ah205118) (Concave Leveling), Sheave; (B: First Outer Wing Row (Bottom Stud)) 10.500 X 20 X 2 mm, Sheave; (A: With Cab) 10.500 X 20 X 2 mm (Sub For Er023071, Appl), Sheave; (A: Collarshift Transmission (5420) Sn -44***12 (5520) Sn -45***03) 10.500 X 20 X 2 mm, Washer, Sheave; 10.500 X 20 X 2 mm (Sub For 24m7178), Sheave; 10.500 X 20 X 2 mm 10, 5x20x2mm, Sheave; 10,5 X 20 X 2 mm, Washer; 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079") (Sub For Ffsb106133), Sheave; (A: With Tier Ii Engine (High Pressure Common Rail)) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm Sub For 12m7096, Sheave; (A: Use Only With Electro-Hydraulic Power Take-Off) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Ch11469), Sheave; 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er046905 Appl), Sheave; 10.5x21x2mm, Sheave; 10.500 X 20 X 2 mm As Required Between Brackets, Sheave; 10.500 X 20 X 2 mm (Sub For Er023071, Appl), Sheave; 10.5x20x2mm, Sheave; (A: Include In Ah141672) 10.500 X 20 X 2 mm, Washer; 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079") (Sub For Ffsb107142), Sheave; (A: For Pin Drawbar Tongue) 10.500 X 20 X 2 mm, Sheave; (A: Used In 5725hc Tractor Too) 10.500 X 20 X 2 mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 55 Separator Drive : Tension Pulley (Seperator) [02b04]
11***12Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm1
11***14Cotter Pin; 3,2 X 22mm, Cotter Pin, Cotter Pin; 3x25mm, Cotter Pin; (A) 3,2x22mm, Cotter Pin; 3,2x22mm, Cotter Pin; 3.200 X 22mm, Cotter Pin; 3,2 X 22 mm, Cotter Pin; 3.200 X 22 mm, Cotter Pin; 3x22mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; 3 2x22mm, Cotter Pin; 3 X 25 mm, Cotter Pin; M3 X 25, Cotter Pin; 3,2x25mm1
11***22Cotter Pin; M4 X 30, Cotter Pin; 4x30mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 30 mm |, Cotter Pin; 4x28mm, Cotter Pin; 4 X 30 mm, Cotter Pin; (A) 4x28mm, Cotter Pin; 4 X 28 mm, (Sub For 11h222), Cotter Pin1
See all parts with full part numbers in Heavy Parts AI →
56 Variable Cylinder Sheaves
John Deere : 940 - Combine : 56 Variable Cylinder Sheaves : Cylinder Chain Drive [02b09]
03***88Bolt; 10x20mm, Bolt, Bolt; (A: For Tractor With 2 Steps, On The Left And On The Right) M10 X 20, Bolt; (312) M10x20, Bolt; (A: With Hydraulic Cab Suspension (Hcs)) M10 X 20, Bolt; M10 X 20 Lh And Rh, Bolt; M10 X 20 M10x20, Bolt; (A: Fuel Tank, 30 Gallon (113, 6 Liter) (Cab)) M10 X 20, Bolt; (A: With Raised Fuel Tank For Better Ground Clearance) M10 X 20, Bolt; (A: With Raised Fuel Tank For Better Ground Clearance) (B: With Hydraulic Cab Suspension (Hcs)) M10 X 20, Bolt; M10 X 25, Bolt; M10 X 20 (Sub For 03m7035), Bolt; M10 X 20 M10 X 20, Bolt; M10 X 20, Bolt; M10x20, Bolt; 10 X 20 mm, Bolt; M10 X 80, Bolt; M10 X 20 (Lh And Rh), Bolt; (A) M10 X 20, Bolt; (A: For Tractor With 3 Steps, On The Left And On The Right) M10 X 204
03***12Bolt; 12x100mm, Bolt, Bolt; M12 X 100, Bolt; M12x1001
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 56 Variable Cylinder Sheaves : Variable Cylinder Sheaves [02b13]
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm16
14***74Lock Nut; M24x1,5mm, Lock Nut; M24x1,5, Lock Nut; M24, Lock Nut; M24x1 5, Lock Nut; M24 X 1,5, Lock Nut; 24 X 1,5 mm, Lock Nut; 24mm1
15***12Drain Plug; 12 X 1,5 mm, Drain Plug; M12x1,5, Drain Plug; M12 X 1,5, Drain Plug; 12x1,5mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 56 Variable Cylinder Sheaves : Variable Cylinder Sheaves [02b15]
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm8
14***74Lock Nut; M24x1,5mm, Lock Nut; M24x1,5, Lock Nut; M24, Lock Nut; M24x1 5, Lock Nut; M24 X 1,5, Lock Nut; 24 X 1,5 mm, Lock Nut; 24mm1
19***56Cap Screw; M10 X 60 Lh, Rh, Cap Screw, Cap Screw; M10 X 60 (Grade 8.8) Shear Bolt, Cap Screw; M10x60, Cap Screw; M10x70, Cap Screw; (C) M10x60, Cap Screw; M10 X 60 (Rigid), Cap Screw; M10 X 60 Rh, Lh, Cap Screw; X M10 X 60, Cap Screw; (A) (B) M10 X 60 (Shear Bolt) (Grade 8.8), Cap Screw; M10 X 60, Cap Screw; 10x60mm, Cap Screw; (B: (Xxxxxx- ) 8560-00***43; 8760-00***19; 8960-00***61) M10 X 60, Cap Screw; (C) (D) M10 X 60, Cap Screw; M10 X 60 (For Dc54470), Cap Screw; M10 X 60, (312) M10x60, Cap Screw; M10 X 60 M10x60, Cap Screw; M10 X 60 (For Dc54470, Dc212852), Cap Screw; M10 X 60, M10x60, Cap Screw; M10 X 60 (Use With R104705), Cap Screw; M10 X 60 (For Dc212852), Cap Screw; (A) M10x60, Cap Screw; M10 X 70, Cap Screw; M10 X 60, M10 X 60, Cap Screw; M10 X 60 (Use With R104705 And R84034), Cap Screw; (B) M10 X 60, Cap Screw; M10 X 60 (Shear Bolt) (Grade 8.8), Cap Screw; (A), Cap Screw; M10, Cap Screw; (A: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- )) (B: Starting From Series Number 2115 (07***01- ), 2117 (07***01- )) M10 X 60, Cap Screw; (B) M10x608
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 56 Variable Cylinder Sheaves : Yoke, Variable Cylinder And Beater [02b11]
11***20Cotter Pin; 4 X 25 mm, Cotter Pin, Cotter Pin; 4 X 22 mm, Cotter Pin; 4 X 25 mm |, Cotter Pin; 4 X 22 mm 4 X 22mm, Cotter Pin; (A) 4x22mm, Cotter Pin; 4 X 22mm, Cotter Pin; 4x22, Cotter Pin; 4x22mm, Cotter Pin; 4x25mm, Cotter Pin; (A) 4 X 22 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; Ar, 4 X 22 mm, Cotter Pin; M4 X 25, Cotter Pin; (A), Cotter Pin; 4 X 20mm1
11***22Cotter Pin; M4 X 30, Cotter Pin; 4x30mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 30 mm |, Cotter Pin; 4x28mm, Cotter Pin; 4 X 30 mm, Cotter Pin; (A) 4x28mm, Cotter Pin; 4 X 28 mm, (Sub For 11h222), Cotter Pin3
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
See all parts with full part numbers in Heavy Parts AI →
57 Separator
John Deere : 940 - Combine : 57 Separator : Beater [02c03]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm8
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 57 Separator : Concave [02b19]
11***19Cotter Pin; 4x18mm (Sub For 11m7013), Cotter Pin, Cotter Pin; 4x20mm, Cotter Pin; 4x18 mm, Cotter Pin; 4 X 18 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; 4x18mm (Sub For 11h216), Cotter Pin; 4x18mm, Cotter Pin; 4 X 18mm, Cotter Pin; 4x18mm (Sub For 11h216, 11m7013), Cotter Pin; 4 X 8mm, Cotter Pin; (A) 4x18mm1
11***22Cotter Pin; M4 X 30, Cotter Pin; 4x30mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 30 mm |, Cotter Pin; 4x28mm, Cotter Pin; 4 X 30 mm, Cotter Pin; (A) 4x28mm, Cotter Pin; 4 X 28 mm, (Sub For 11h222), Cotter Pin2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm6
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 57 Separator : Cover Plate And Bracket [02c01]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm0
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm0
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm0
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 57 Separator : Finger Grate [02b21]
03***17Bolt; (312) M10 X 25, Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 X 25 2130, Bolt; (D: Components Of Item Dq73362) M10 X 25, Bolt; (A), Bolt; M10x26, Bolt; M10 X 25 (Sub For Er020630, Appl), Bolt; (A) M10x25, Bolt; M10 X 25 3/8" X 3" Rh (Sub For 03h1658 Or 03h2131), Bolt; (B) M10x25, Bolt; M10 X 25 (Sub For 03m7084), Bolt; M10 X 25, (Sub For 03m7088), Bolt; (312) M10x25, Bolt; M10x25, Bolt; M10 X 25, Bolt; M10 X 25 M10x25, Bolt; M10 X 25 M10 X 25, Bolt, Bolt; (A: With Long Feeder House) M10 X 25, Bolt; M10 X 25, M10x25, Bolt; (A) 10x25mm, Bolt; (A: Rice) M10 X 25, Bolt; M10 X 25 (Sub For Er020630 Appl), Bolt; 10 X 25 mm, Bolt; 10x25mm, Bolt; (B) M10 X 25, Bolt; (A: For Rice) M10 X 254
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm24
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 57 Separator : Rasp Bar Cylinder [02b17]
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm11
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)32
14***31Nut; M6, Nut; M12 (D), Nut; M12, Nut; M12m, Nut; 12 mm, Nut; M12 (W/ E63932), Nut; 12 mm (W/ E63932) Key 3, Nut; M12 (For Z45182), Nut; 3/8", Nut; (A: For Exportation) M12, Nut; 12 mm (W/ Dc18663), Nut; M14, Nut; M12, M12, Nut; M12 (Sub For 14m7042) |, Nut; (A) (B) (C), Nut; Ar, M12 (Sub For 14m7042), Nut; (C: For Commandcenter) M12, Nut; 14 mm, Nut; (A) (B) (C) M12, Nut; M12 (Sub For 14m7042), Nut; M12 M12, Nut; 12 mm (W E63932) Key 3, Nut; M12 (W/ E63930), Nut; (A) M12, Nut; 12mm, Nut, Nut; Ar, M12, Nut; M12, (312) M12, Nut; M12 |, Nut; M12, (312), Nut; M12 (W/ Dc18663), Nut; M12 Sub For 14m7275, Nut; 12x1,75, Nut; (A), Nut; M12 (Sub For 14m7066), Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M12, Nut; M12, M8x80, Nut; (C) M12, Nut; M12, Rh, Nut; 12 mm (W/ E63930), Nut; M12 (W/ Dc18661)60
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 57 Separator : Strone Trap/Cylinder Cover [02b23]
03***68Bolt; M6 X 20 (Use With Re47041 Or Se500467), Bolt; M6 X 20, Bolt; M6x20, Bolt, Bolt; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) M6 X 20, Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6 X 20, Bolt; M6 X 20 M6 X 20, Bolt; (C), Bolt; M6 X 20 (Use With Re47042), Bolt; (A: 6076arw04 W/ "Ep9" Nippondenso) M6 X 20, Bolt; M6 X 20, Bolt; M6 X 20 (Use With Re47037), Bolt; 6x20mm12
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm16
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm4
See all parts with full part numbers in Heavy Parts AI →
58 Straw Walker
John Deere : 940 - Combine : 58 Straw Walker : Chaine Drive For Cross-Shaker [02c18]
11***22Cotter Pin; M4 X 30, Cotter Pin; 4x30mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 30 mm |, Cotter Pin; 4x28mm, Cotter Pin; 4 X 30 mm, Cotter Pin; (A) 4x28mm, Cotter Pin; 4 X 28 mm, (Sub For 11h222), Cotter Pin2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm3
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm7
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 58 Straw Walker : Cross Shaker Shaft And Hub [02c16]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm13
12***55Washer; (A: Components Of Item Dq73362) 13 mm, Washer; M12, Washer; 13 mm, Washer; M8, Washer; 12mm, Washer; (A) 12mm, Washer; 12 mm, Washer2
14***29Nut; M8, Nut; (A) 8mm, Nut; 950, M8, Nut; M8, 6,6x12,5x1,6, Nut; (A) M8 (Sub For 14m7137), Nut; (A: Area Counter Support, R.H. Side) M8, Nut; M8 Includes Dq11813 And Dq12055, Nut; M6, Nut; (A) ,M8, Nut; M8 M8x16, Nut; (A) M8, Nut; M8, 8, Nut; (C) M8, Nut; X M8, Nut; X M8, Nut; M8, (312), Nut; M8 (Sub For Sb12293201/0), Nut; Ar, M8, Nut; (A: Rice/Corn) M8, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8, Nut; 8mm, Nut; 960, M8, Nut; M8 (Sub For 14m7137), Nut; M8 (Sub For 14m6825), Nut; 970, M8, Nut; (B), Nut; M8 Use With Az17518, Nut; Lh, M8, Nut; M8, M, Nut; M8 (For Al63397), Nut; M8, M8, Nut; M8 (Sub For 14m7137, 14m7140), Nut; M8, Use W/ Az17516 - Az17518, Nut; M8, (Use With Az17518), Nut; M9, Nut; (B) M8, Nut; 5/16" 8mm, Nut; 930, M8, Nut; (B: Without Lateral Tilt) M8, Nut; M8 |, Nut; M8, M12x35, Nut; (A: Rice Version) M8, Nut; M10, Nut; M8, M8, 8mm, Nut; Ar, Lh, M8, Nut; 8x1,25mm, Nut; M8, (10.9), Nut; 8 mm, Nut; Ar M8, Nut; M8 X 20, Nut; 940, M8, Nut; M8, 940w/ 343, Nut; 8mm (Sub For 14m7137), Nut; M8, 8x7mm, Nut; M8, (312) M8, Nut; (A: For Usa Only) M8, Nut; M8, 8mm, Nut; M8 M8, Nut, Nut; M8, (312) M10, Nut; (A) (B) M8, Nut; (A: Discharge Spout (High Arc)) M8, Nut; Ar L.H. M8, Nut; M8, (B), Nut; (B: For Usa Only) M810
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 58 Straw Walker : Cross Shaker Stars [02c14]
03***93Bolt; (C), Bolt; M8 X 25 (In Slot Farthest From Engine), Bolt; M8 X 25 (Use With L.H. Aa65315), Bolt; (A: With Long Feeder House) M8 X 25, Bolt; M8x35, Bolt, Bolt; (A: Syncshuttle Transmission - 5420: Sn -44***42, 5520: Sn -45***03) M8 X 25, Bolt; (B), Bolt; M8 X 25 M8x25, Bolt; M8 X 25 (Square Neck), Bolt; (A: Syncshuttle Transmission - 5220: Sn -42***29, 5320: Sn -43***72) M8 X 25, Bolt; (A: Syncshuttle Transmission - 5420: Sn 44***43-, 5520: Sn 45***04-) M8 X 25, Bolt; (B) M8 X 25, Bolt; M8 X 25 (Use With L.H. Aa57459), Bolt; M8 X 25 M8 X 25, Bolt; (A: Lateral Tilt) M8 X 25, Bolt; M8 X 25, Bolt; (A), Bolt; M8 X 25 (Not Used This Application), Bolt; 8x25mm, Bolt; M8x256
14***66Nut; M8 (Sub For Er022407, Appl), Nut; (A: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- )) (B: Starting From Series Number 2115 (07***01- ), 2117 (07***01- )) M8, Nut, Nut; M8 (Sub For Er022047 Appl), Nut; M8 2126, Nut; M8 (Sub For 14m7298), Nut; M8, No Usado, Nut; M8 (A), (B), Nut; 10.5x21x2mm, Nut; (A) M8, Nut; (A: 9550 (69***01 - ) 9550sh (69***01 - )) M8, Nut; (A: For Msl) M8, Nut; (B: With Command Arm) M8, Nut; (A) (C) M8, Nut; (B: W/Cab) M8, Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) M8, Nut; (C: With Command Arm) M8, Nut; M8 Not Illustrated, Nut; (A: Only For 50 Km/H) M8, Nut; (B: With Hydraulic Cab Suspension (Hcs)) M8, Nut; (B: For Tractors Without Cab) M8, Nut; (D: Components Of Item Dq73362) M8, Nut; (B: 9550 (70***01- ) 9550sh (70***01- )) M8, Nut; (A: For Pickup 1, 81 M) M8, Nut; (A: Only For North America And Japan) M8, Nut; (A: Region Ii Only) M8, Nut; Ar, M8, Nut; M8 (A), Nut; (A: For 2 Functions) (B: For 2 Functions +1) (C: For 3 Functions) M8, Nut; M8 2113, Nut; (C: (5410) -34***48 (5510) -35***34) M8, Nut; (A: Feeder House Lateral Tilt) M8, Nut; (A: For 9650 Sts (69***01- ) & 9750 Sts (69***01- )) M8, Nut; (B: With Electronic Speed Control) M8, Nut; (C: (5410) -34***47 (5510) -35***27) M8, Nut; (E: Up To Series 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) (F: Up To Series 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; M8 (A) (B), Nut; (D) M8, Nut; (A: For Rotor-Type Pickup) M8, Nut; M8, With Single Auger With Power Deflector, Nut; (C: Only For 2.0 M Rotor Type Pickup) M8, Nut; M8 Din985, Nut; M8, M8, Nut; (A: For Machines With Hydraulic Brake System) M8, Nut; (A: Without The Largest Diameter Starter Roll) M8, Nut; (C: Also For Super Narrow Version) M8 (Sub For Er022407 Appl), Nut; (A: For Pickup Heavy Duty) M8, Nut; (B: For 6505 Tractors) M8, Nut; M8 (E64256), Nut; M8, (312) M8, Nut; (E: With Electronic Speed Control) M8, Nut; M8 M8 X 1.25, Nut; M8, Nut; (B: For 2 Functions +1) (D: For Gear Shift Switches) M8, Lock Nut; M8, (Sub For J950010, This Application), Nut; M8 (Sub For 14m7273), Nut; 8 mm, Nut; (A) (B) M8, Nut; M8 M8, Nut; M8 (Sub H137328), Nut; (A: Rice Version) M8, Nut; M8 (Sub For L36292 Appl), Nut; M8, (Sub For Es10350), Nut; M10, Nut; M8 (Ord Dc50810), Nut; (A: At170191 Kit, Contains Clamps, Spacer And Hardware) (B: At170190 Kit, Contains Clamps, And Hardware) M8, Nut; (B: For 9650 Sts (70***01- ) & 9750 Sts (70***01- )) M8, Nut; (C) M8, Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M8 M8, Nut; (A: Used In 5615 Hc Too) M8, Nut; M8, Serie 600 Ct 20, Ct 30, Nut; M8 2130, Nut; (A) M8 (Sub For E64256), Nut; M8, 11x21x2mm, Nut; M8 (Sub For Er022407 Appl), Nut; M8 (A) (Sub For Es10350), Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; (A: For 6205 Tractors) (C: Not For Msl) M8, Nut; (C: For 3 Functions) (D: For Gear Shift Switches) M8, Lock Nut; M8, Nut; (A: Mexico) (B: Turkey) M8, Nut; (A: For Fork-Type Pickup) M8, Nut; (A: Used With Optional Double Twine Arm.) M8, Nut; (A: Starting From Series Number 2113 (07***01- ), 2115 (07***01- ), 2117 (07***01- )) (B: Starting From Series Number 2122 (07***01- ), 2126 (07***06- )) M8, Nut; (B: For Pickup 1.41 M) M8, Nut; M8, (312), Nut; (A: For 2 Functions) (B: For 2 Functions + 1) M8, Nut; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M8, Nut; M8 (Use With T129534), Nut; (A: Only For Pick Up 2 M With Precutter) M8 (Ord Dc50574), Nut; M8 (Sub For Er022408 Appl), Nut; (C: With Hydraulic Cab Suspension (Hcs)) M8, Nut; (B: Without Lateral Tilt) M8, Nut; (C: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- ), 2115 (07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M8, Nut; 8mm, Nut; M8 |, Nut; (A: 5303 ( -Xxxxxx), 5403 ( -00***62).) M8, Nut; M4x6, Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; M8 (Sub For At265058), Nut; (B) M8, Nut; M8 M8g, Nut; M8 (Export), Nut; M8 (Sub For E64256), Nut; M8 Lh, Rh, Nut; (A: Used In 5625hc Tractor Too) M8, Nut; (A: 2126, 24 Rows) M8, Nut; (B: Low Profile Cab) M8, Nut; (A: For 1, 81 Meter Pickup) M8, Nut; M8 W/ Hcs-Cab, Nut; M8 (B), Nut; M8 (Sub For E64259), Nut; M8 (Sub For Er024805 Appl), Nut; M8 (Sub For Er047321 Appl), Nut; (A: Components Of Item Dq73362) M8, Nut; (A: For 6205 Tractors) M8, Nut; M8 Nylstop, Nut; Ar M8, Nut; (B: For Electronic Foot Throttle) M8, Nut; (A) 8mm |, Nut; (A: Hi-Crop) M86
14***67Lock Nut; 940, M10, Lock Nut; M10, (Sub For 14m7337, This Application), Lock Nut; (I: Components Of Item Dq73362) M10, Lock Nut; (F: Up To Series 2122 ( -06***12), 2126 ( -07***05)) M10 2122, 2126, Lock Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M10, Lock Nut; M10 (Sub For 14m7140), Lock Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M10, Lock Nut; 10mm (Sub For 43m7004), Lock Nut; (A) 10mm, Lock Nut, Lock Nut; (A: Sekura Cab - 3 Cylinder Tractors) M10, Lock Nut; M10 Din985 (8.0), Lock Nut; M10 Nsep (Ord Dc50564), Lock Nut; (Sub For M85516), Lock Nut; M10 M10, Lock Nut; M10 Locking, (Rear Center), Lock Nut; X M10, Lock Nut; M10 Standard Dipperstick, Lock Nut; M10x1,5, Lock Nut; M8, Lock Nut; M10 (Sub For 11m7012) (Appl), Lock Nut; M10, Lock Nut; M10x1.5, Lock Nut; (A: Model 9660 For North America Only) M10, Lock Nut; M10 (Sub For Es10679), Lock Nut; M10 (With Standard Lighting), Lock Nut; M10 Lh, Rh, Lock Nut; Ar, Lock Nut; (B: For Japan Only) M10, Lock Nut; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M10, Lock Nut; M10, Plate To Frame, Lock Nut; (A) (B) M10, Lock Nut; (A: Without Exhaust Gas Recirculation) M10, Lock Nut; (E: Up To Series 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) (F: Up To Series 2122 ( -06***12), 2126 ( -07***05)) M10, Lock Nut; 10mm, Lock Nut; (A: 2126, 24 Rows) M10, Lock Nut; (A: Used In 5615 Hc Too) M10, Lock Nut; 10 mm, Lock Nut; M10, (312) M10, Lock Nut; M10 X 1,5, Lock Nut; M10, (Sub For M85516), Lock Nut; (A: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- )) (B: Starting From Series Number 2115 (07***01- ), 2117 (07***01- )) M10 2130, Lock Nut; (A: Starting From Series Number 2113 (07***01- ), 2115 (07***01- ), 2117 (07***01- )) (B: Starting From Series Number 2122 (07***01- ), 2126 (07***06- )) M10 2130, Lock Nut; (C: Starting From Series Number 2109(07***01- ), 2111(07***01- ), 2113(07***01- ), 2115(07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M10, Lock Nut; (C: For Electronic Wrapping Control Plus) M10, Lock Nut; (A: Option) M10, Lock Nut; M10 Rh, Lh, Lock Nut; (A) M10, Lock Nut; M10 Nla, Lock Nut; M10 With Standard Lighting, Lock Nut; M10, (312), Lock Nut; M10, Lock Nut; (D: Components Of Item Dq73362) M10, Lock Nut; M10 (Sub For A51212, 21m7423 Appl), Lock Nut; M10, 14x24mm, Lock Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) M10, Lock Nut; M10 With Additional Lighting, Lock Nut; M10 (With Additional Lighting), Lock Nut; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 2130, Lock Nut; M10, M10, Lock Nut; M10 Rh, Lock Nut; M10 (Sub For 14m7334 Appl), Lock Nut; M10, A, Lock Nut; (C: Starting From Series Number 2109(07***01- ), 2111(07***01- ), 2113(07***01- ), 2115(07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M10 2130, Lock Nut; (A) 10mm (Sub For 43m7001), Lock Nut; (A), Lock Nut; M10, M8, Lock Nut; (B) M10, Lock Nut; M10, ( Ffsb110984 No Longer Available), Lock Nut; M10 (For Cc44658), Lock Nut; M10 (Sub For A51212 Appl), Lock Nut; M10 X 1.5, Lock Nut; M10 (Sub For Sb12585100/0, 14m7140), Lock Nut; (A: For 3.7 M (12') And 4.6 M (15') Sizes) M10, Lock Nut; M10, (B)8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 58 Straw Walker : Drive, Cross-Shaker [02c20]
03***78Bolt; M16 X 75, Bolt; 16x75mm, Bolt; (A) M16x75, Bolt; M16x75, Bolt; M16 X 90, Bolt; (A) M16 X 751
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 58 Straw Walker : Drive, Cross-Shaker [02c22]
03***07Bolt; 12x25mm, Bolt; M12x25, Bolt; M12 X 25, Bolt; (312)M12x25, Bolt; (A) M12 X 25, Bolt; M12 X 25 (Sub For 03m7059), Bolt; M12 X 25 (W/ E63932)1
11***09Cotter Pin; (A: If Equipped) 2 X 16 mm, Cotter Pin; (A: 5303 (-Xxxxxx), 5403 (-00***62).) 2 X 16 mm, Cotter Pin; (A: From Sr.No. 5038d(00***62-)) 2 X 16 mm, Cotter Pin; 2 X 16 mm (A), Cotter Pin; (A: For Vandal-Proofing Kit) 2 X 16 mm, Cotter Pin; 2 X 16 mm (Sub For 44***52), Cotter Pin; (C: With Hydraulic Cab Suspension (Hcs)) 2 X 16 mm, Cotter Pin; 2 X 16 mm (Use With R99730), Cotter Pin; (A: From Sr.No 5310s(00***84-), 5410 (00***19-), 5610 (00***01-).) 2 X 16 mm, Cotter Pin; 2 X 16 mm 2.0 X 16 (Sub For T110418), Cotter Pin; 2 X 16 mm (Sub For At258341, 43***27, A762020, Th101639 And 11m7008), Cotter Pin; 2x18mm, Cotter Pin, Cotter Pin; 2 X 16 mm 2x16mm, Cotter Pin; (A) M2 X 16, Cotter Pin; (A) 2 X 16 mm, Cotter Pin; 2 X 16 mm (Sub For T110418), Cotter Pin; (A: Without Cab) 2 X 16 mm, Cotter Pin; (A: Cab Tractors) (B: Oos Tractors) 2 X 16 mm (Sub For 11m7080), Cotter Pin; (B) 2x16mm |, Cotter Pin; (Sub For Ch12316), Cotter Pin; 2 X 16 mm Bellcrank To Valve, Cotter Pin; 2 X 16 mm M2 X 20, Cotter Pin; 2 X 16 mm (Sub 11m7058), Cotter Pin; (A) 2x18mm, Cotter Pin; 2 X 16 mm (K1), Cotter Pin; 2 X 18 mm, Cotter Pin; (A) (B) 2 X 16 mm, Cotter Pin; (A: From Sr.No. 5103s(01***67-), 5104(01***62-), 5204(00***15-)) 2 X 16 mm, Cotter Pin; (A: Open Operator'S Station) 2 X 16 mm, Cotter Pin; (A) 2x16mm, Cotter Pin; (B: 5625 (00***12-), 5725 (00***01-)) 2 X 16 mm, Cotter Pin; 2x16mm, Cotter Pin; 2 X 16 mm, Cotter Pin; 2 X 16mm, Cotter Pin; 2 X 16 mm Power Take-Off Extension, Cotter Pin; (A: 5625 (-00***11), 5725 (-00***00)) 2 X 16 mm1
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 58 Straw Walker : Straw Walker Drive And Lower Chaffer Board Drive [02c12]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm3
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm1
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 58 Straw Walker : Straw Walker Shafts [02c06]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x2014
03***05Bolt; 12 X 25 mm (W/ E63932) Key 3, Bolt; 10x75mm, Bolt; M10x75, Bolt; (C), Bolt; M10 X 75, Bolt; M10 X 75, (Sub For 03m7104), Bolt, Bolt; M10 X 75 M10 X 7524
03***89Bolt; M10x130, Bolt; M10 X 130 (For Az32050, Az33553, Az33554, Az36299), Bolt; M10 X 130, Bolt; M10x130 (Ord Az35361), Bolt; M10 X 130 (For Az33590, Az33591), Bolt; M10 X 130 (Sub For 03m7188), Bolt; M10 X 130 (For Az32050, Az33590, Az33591), Bolt; (C: For Electronic Wrapping Control) M10 X 1300
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 58 Straw Walker : Straw Walker Warnin Device,Front [02c24]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm4
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M64
21***31Screw; M6x16, Screw; (A) M6x15, Screw; M6 X 15, Screw; M6x15, Screw; M6 X 15 M6 X 15, Screw; 6x15mm, Screw; M6 X 16, Screw; 6 X 15 mm, Screw; 6x15, Screw; (B) M6 X 15, Screw; (A) M6x18, Screw; M6x18, Screw; M6 X15, Screw; M6 X 12, Screw; (A) M6 X 15, Screw; M6x124
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 58 Straw Walker : Straw Walker [02c08]
11***13Cotter Pin; (A) 3x20mm, Cotter Pin; 3x2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x18mm (Sub For 34m7010), Cotter Pin; 3x10mm, Cotter Pin; 3x18mm, Cotter Pin; M3 X 20, Cotter Pin; 3,2 X 18 mm, Cotter Pin; 3.200 X 18 mm, Cotter Pin; 3x20mm, Cotter Pin; (A) 3,2x20mm, Cotter Pin, Cotter Pin; 3 2x18mm, Cotter Pin; 3,2x18mm, Cotter Pin; M3,2 X 20, Cotter Pin; 3 X 2 X 20 mm, Cotter Pin; 3,2 X 20 mm, Cotter Pin; 3 X 10 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm24
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M624
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 58 Straw Walker : Straw Walker [02c10]
11***13Cotter Pin; (A) 3x20mm, Cotter Pin; 3x2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x18mm (Sub For 34m7010), Cotter Pin; 3x10mm, Cotter Pin; 3x18mm, Cotter Pin; M3 X 20, Cotter Pin; 3,2 X 18 mm, Cotter Pin; 3.200 X 18 mm, Cotter Pin; 3x20mm, Cotter Pin; (A) 3,2x20mm, Cotter Pin, Cotter Pin; 3 2x18mm, Cotter Pin; 3,2x18mm, Cotter Pin; M3,2 X 20, Cotter Pin; 3 X 2 X 20 mm, Cotter Pin; 3,2 X 20 mm, Cotter Pin; 3 X 10 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm0
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M60
See all parts with full part numbers in Heavy Parts AI →
60 Cleaning Fan
John Deere : 940 - Combine : 60 Cleaning Fan : Celaning Fan-Adjusting Rod [02d06]
11***10Pin; 2 X 18 mm, Pin; 2 X 18 mm 2 X 18 mm, Pin; 3,2x20mm, Pin; 2x18mm, Pin; 2 X 20 mm, Pin; 3x18mm, Pin; 3 X 18 mm1
11***13Cotter Pin; (A) 3x20mm, Cotter Pin; 3x2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x18mm (Sub For 34m7010), Cotter Pin; 3x10mm, Cotter Pin; 3x18mm, Cotter Pin; M3 X 20, Cotter Pin; 3,2 X 18 mm, Cotter Pin; 3.200 X 18 mm, Cotter Pin; 3x20mm, Cotter Pin; (A) 3,2x20mm, Cotter Pin, Cotter Pin; 3 2x18mm, Cotter Pin; 3,2x18mm, Cotter Pin; M3,2 X 20, Cotter Pin; 3 X 2 X 20 mm, Cotter Pin; 3,2 X 20 mm, Cotter Pin; 3 X 10 mm1
11***20Cotter Pin; 4 X 25 mm, Cotter Pin, Cotter Pin; 4 X 22 mm, Cotter Pin; 4 X 25 mm |, Cotter Pin; 4 X 22 mm 4 X 22mm, Cotter Pin; (A) 4x22mm, Cotter Pin; 4 X 22mm, Cotter Pin; 4x22, Cotter Pin; 4x22mm, Cotter Pin; 4x25mm, Cotter Pin; (A) 4 X 22 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; Ar, 4 X 22 mm, Cotter Pin; M4 X 25, Cotter Pin; (A), Cotter Pin; 4 X 20mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 60 Cleaning Fan : Cleaning Fan Tension Pulley [02d07]
03***80Bolt; M16 X 70 (Sub For Z23400), Bolt; M16 X 70, Bolt; M16x701
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm2
12***17Lock Washer; 16 M, Lock Washer; 16 mm, Lock Washer; (A) 16mm, Lock Washer; (B) 16mm, Lock Washer; 16mm, Lock Washer; M16, Lock Washer; 16.200 mm, Lock Washer, Lock Washer; Ar, 16 mm, Lock Washer; (A) 16 mm, Lock Washer; Fwd, Lock Washer; 16mm (Sub For 12m1629), Lock Washer; 940, 16 mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 60 Cleaning Fan : Cleaning Fan-Variator [02d04]
03***88Bolt; 10x20mm, Bolt, Bolt; (A: For Tractor With 2 Steps, On The Left And On The Right) M10 X 20, Bolt; (312) M10x20, Bolt; (A: With Hydraulic Cab Suspension (Hcs)) M10 X 20, Bolt; M10 X 20 Lh And Rh, Bolt; M10 X 20 M10x20, Bolt; (A: Fuel Tank, 30 Gallon (113, 6 Liter) (Cab)) M10 X 20, Bolt; (A: With Raised Fuel Tank For Better Ground Clearance) M10 X 20, Bolt; (A: With Raised Fuel Tank For Better Ground Clearance) (B: With Hydraulic Cab Suspension (Hcs)) M10 X 20, Bolt; M10 X 25, Bolt; M10 X 20 (Sub For 03m7035), Bolt; M10 X 20 M10 X 20, Bolt; M10 X 20, Bolt; M10x20, Bolt; 10 X 20 mm, Bolt; M10 X 80, Bolt; M10 X 20 (Lh And Rh), Bolt; (A) M10 X 20, Bolt; (A: For Tractor With 3 Steps, On The Left And On The Right) M10 X 202
11***13Cotter Pin; (A) 3x20mm, Cotter Pin; 3x2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x18mm (Sub For 34m7010), Cotter Pin; 3x10mm, Cotter Pin; 3x18mm, Cotter Pin; M3 X 20, Cotter Pin; 3,2 X 18 mm, Cotter Pin; 3.200 X 18 mm, Cotter Pin; 3x20mm, Cotter Pin; (A) 3,2x20mm, Cotter Pin, Cotter Pin; 3 2x18mm, Cotter Pin; 3,2x18mm, Cotter Pin; M3,2 X 20, Cotter Pin; 3 X 2 X 20 mm, Cotter Pin; 3,2 X 20 mm, Cotter Pin; 3 X 10 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 60 Cleaning Fan : Fan Hausing With Shaft And Deflectors [02d02]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x206
11***11Cotter Pin; M3,2 X 15, Cotter Pin; 3x15mm, Cotter Pin, Cotter Pin; 3.200 X 14 mm, Cotter Pin; 3 X 15 mm, Cotter Pin; 3x15, Cotter Pin; 3,2x14mm, Cotter Pin; M3 X 15, Cotter Pin; (A) 3 X 15 mm, Cotter Pin; 3x15 mm2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm6
See all parts with full part numbers in Heavy Parts AI →
61 Cleaning Unit
John Deere : 940 - Combine : 61 Cleaning Unit : Grain Pan Shaft And Support [02d18]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm20
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm4
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 61 Cleaning Unit : Grain Pan [02d09]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm34
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M634
14***66Nut; M8 (Sub For Er022407, Appl), Nut; (A: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- )) (B: Starting From Series Number 2115 (07***01- ), 2117 (07***01- )) M8, Nut, Nut; M8 (Sub For Er022047 Appl), Nut; M8 2126, Nut; M8 (Sub For 14m7298), Nut; M8, No Usado, Nut; M8 (A), (B), Nut; 10.5x21x2mm, Nut; (A) M8, Nut; (A: 9550 (69***01 - ) 9550sh (69***01 - )) M8, Nut; (A: For Msl) M8, Nut; (B: With Command Arm) M8, Nut; (A) (C) M8, Nut; (B: W/Cab) M8, Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) M8, Nut; (C: With Command Arm) M8, Nut; M8 Not Illustrated, Nut; (A: Only For 50 Km/H) M8, Nut; (B: With Hydraulic Cab Suspension (Hcs)) M8, Nut; (B: For Tractors Without Cab) M8, Nut; (D: Components Of Item Dq73362) M8, Nut; (B: 9550 (70***01- ) 9550sh (70***01- )) M8, Nut; (A: For Pickup 1, 81 M) M8, Nut; (A: Only For North America And Japan) M8, Nut; (A: Region Ii Only) M8, Nut; Ar, M8, Nut; M8 (A), Nut; (A: For 2 Functions) (B: For 2 Functions +1) (C: For 3 Functions) M8, Nut; M8 2113, Nut; (C: (5410) -34***48 (5510) -35***34) M8, Nut; (A: Feeder House Lateral Tilt) M8, Nut; (A: For 9650 Sts (69***01- ) & 9750 Sts (69***01- )) M8, Nut; (B: With Electronic Speed Control) M8, Nut; (C: (5410) -34***47 (5510) -35***27) M8, Nut; (E: Up To Series 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) (F: Up To Series 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; M8 (A) (B), Nut; (D) M8, Nut; (A: For Rotor-Type Pickup) M8, Nut; M8, With Single Auger With Power Deflector, Nut; (C: Only For 2.0 M Rotor Type Pickup) M8, Nut; M8 Din985, Nut; M8, M8, Nut; (A: For Machines With Hydraulic Brake System) M8, Nut; (A: Without The Largest Diameter Starter Roll) M8, Nut; (C: Also For Super Narrow Version) M8 (Sub For Er022407 Appl), Nut; (A: For Pickup Heavy Duty) M8, Nut; (B: For 6505 Tractors) M8, Nut; M8 (E64256), Nut; M8, (312) M8, Nut; (E: With Electronic Speed Control) M8, Nut; M8 M8 X 1.25, Nut; M8, Nut; (B: For 2 Functions +1) (D: For Gear Shift Switches) M8, Lock Nut; M8, (Sub For J950010, This Application), Nut; M8 (Sub For 14m7273), Nut; 8 mm, Nut; (A) (B) M8, Nut; M8 M8, Nut; M8 (Sub H137328), Nut; (A: Rice Version) M8, Nut; M8 (Sub For L36292 Appl), Nut; M8, (Sub For Es10350), Nut; M10, Nut; M8 (Ord Dc50810), Nut; (A: At170191 Kit, Contains Clamps, Spacer And Hardware) (B: At170190 Kit, Contains Clamps, And Hardware) M8, Nut; (B: For 9650 Sts (70***01- ) & 9750 Sts (70***01- )) M8, Nut; (C) M8, Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M8 M8, Nut; (A: Used In 5615 Hc Too) M8, Nut; M8, Serie 600 Ct 20, Ct 30, Nut; M8 2130, Nut; (A) M8 (Sub For E64256), Nut; M8, 11x21x2mm, Nut; M8 (Sub For Er022407 Appl), Nut; M8 (A) (Sub For Es10350), Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; (A: For 6205 Tractors) (C: Not For Msl) M8, Nut; (C: For 3 Functions) (D: For Gear Shift Switches) M8, Lock Nut; M8, Nut; (A: Mexico) (B: Turkey) M8, Nut; (A: For Fork-Type Pickup) M8, Nut; (A: Used With Optional Double Twine Arm.) M8, Nut; (A: Starting From Series Number 2113 (07***01- ), 2115 (07***01- ), 2117 (07***01- )) (B: Starting From Series Number 2122 (07***01- ), 2126 (07***06- )) M8, Nut; (B: For Pickup 1.41 M) M8, Nut; M8, (312), Nut; (A: For 2 Functions) (B: For 2 Functions + 1) M8, Nut; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M8, Nut; M8 (Use With T129534), Nut; (A: Only For Pick Up 2 M With Precutter) M8 (Ord Dc50574), Nut; M8 (Sub For Er022408 Appl), Nut; (C: With Hydraulic Cab Suspension (Hcs)) M8, Nut; (B: Without Lateral Tilt) M8, Nut; (C: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- ), 2115 (07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M8, Nut; 8mm, Nut; M8 |, Nut; (A: 5303 ( -Xxxxxx), 5403 ( -00***62).) M8, Nut; M4x6, Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; M8 (Sub For At265058), Nut; (B) M8, Nut; M8 M8g, Nut; M8 (Export), Nut; M8 (Sub For E64256), Nut; M8 Lh, Rh, Nut; (A: Used In 5625hc Tractor Too) M8, Nut; (A: 2126, 24 Rows) M8, Nut; (B: Low Profile Cab) M8, Nut; (A: For 1, 81 Meter Pickup) M8, Nut; M8 W/ Hcs-Cab, Nut; M8 (B), Nut; M8 (Sub For E64259), Nut; M8 (Sub For Er024805 Appl), Nut; M8 (Sub For Er047321 Appl), Nut; (A: Components Of Item Dq73362) M8, Nut; (A: For 6205 Tractors) M8, Nut; M8 Nylstop, Nut; Ar M8, Nut; (B: For Electronic Foot Throttle) M8, Nut; (A) 8mm |, Nut; (A: Hi-Crop) M83
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 61 Cleaning Unit : Lower Chaffer Board [02d10]
03***59Bolt; M10x55, Bolt; M10 X 60, Bolt; M10x60, Bolt; M10 X 554
03***72Bolt; (312), Bolt; M8 X 40, Bolt; M8x40, Bolt; M8 X40, Bolt; (312) M8x404
03***79Bolt; M10 X 55, Bolt, Bolt; M10x55, Bolt; 10x55mm, Bolt; M10 X 55 103 Used ;14'(4.3 M), 118 Used ; 16'(4.9 M), 138 Used;18'(5.5 M), Bolt; M10 X 604
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 61 Cleaning Unit : Return Pan With Sieves And Chaffer [02d14]
03***74Bolt; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M8 X 65 (Sub For 03m7095), Bolt; M8x65, Bolt; M8 X 65, Bolt, Bolt; M8 X 65 M8 X 65, Bolt; M8x20, Bolt; M8 X 65 Rh, Bolt; (A) (B) M8 X 65 (Sub For 03m7095), Bolt; (A) M8 X 65, Bolt; 940, M8 X 654
03***90Bolt; M8x16, Bolt; M8 X 20, Bolt; M8 X 16, Bolt, Bolt; M8x15, Bolt; 8x15mm, Bolt; M8x20, Bolt; (Sub For Cq01126), Bolt; M8 X 152
11***19Cotter Pin; 4x18mm (Sub For 11m7013), Cotter Pin, Cotter Pin; 4x20mm, Cotter Pin; 4x18 mm, Cotter Pin; 4 X 18 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; 4x18mm (Sub For 11h216), Cotter Pin; 4x18mm, Cotter Pin; 4 X 18mm, Cotter Pin; 4x18mm (Sub For 11h216, 11m7013), Cotter Pin; 4 X 8mm, Cotter Pin; (A) 4x18mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 61 Cleaning Unit : Return Pan With Sieves And Chaffer [02d16]
03***74Bolt; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M8 X 65 (Sub For 03m7095), Bolt; M8x65, Bolt; M8 X 65, Bolt, Bolt; M8 X 65 M8 X 65, Bolt; M8x20, Bolt; M8 X 65 Rh, Bolt; (A) (B) M8 X 65 (Sub For 03m7095), Bolt; (A) M8 X 65, Bolt; 940, M8 X 654
03***90Bolt; M8x16, Bolt; M8 X 20, Bolt; M8 X 16, Bolt, Bolt; M8x15, Bolt; 8x15mm, Bolt; M8x20, Bolt; (Sub For Cq01126), Bolt; M8 X 152
11***19Cotter Pin; 4x18mm (Sub For 11m7013), Cotter Pin, Cotter Pin; 4x20mm, Cotter Pin; 4x18 mm, Cotter Pin; 4 X 18 mm, Cotter Pin; 4 X 20 mm, Cotter Pin; 4x18mm (Sub For 11h216), Cotter Pin; 4x18mm, Cotter Pin; 4 X 18mm, Cotter Pin; 4x18mm (Sub For 11h216, 11m7013), Cotter Pin; 4 X 8mm, Cotter Pin; (A) 4x18mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 61 Cleaning Unit : Shoe Crank And Pitman [02d20]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x206
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm16
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm6
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 61 Cleaning Unit : Sieves [02d12]
12***11Lock Washer; 5,1mm, Lock Washer; 5mm (Sub For 12m3998), Lock Washer; 5mm, Lock Washer; 5 mm M5, Lock Washer; 5mm (Sub For 12h246), Lock Washer; 5 mm (Order 12m7064), Lock Washer; 6mm, Lock Washer; 5,5mm, Lock Washer; (A) 5 mm, Lock Washer; 0.197", Lock Washer; Ar, 5mm, Lock Washer; 5 mm (Sub 12m7064), Lock Washer; M5, Lock Washer; 5 X 9,2 X 1,2 mm, Lock Washer; 5 mm, (Sub 12m7064), Lock Washer; 5,100mm, Lock Washer; (A: For Austria Only) 5 mm, Lock Washer; 5 mm, Lock Washer, Lock Washer; 5 mm A5, Lock Washer; 5 mm, (Use With Re19187), Lock Washer; (A) M5, Lock Washer; 5mm (Sub For L29166), Lock Washer; M10, Lock Washer; 2-916-680-004, Lock Washer; 5 1mm, Lock Washer; (A) 5mm15
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm0
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M60
See all parts with full part numbers in Heavy Parts AI →
65 Auger
John Deere : 940 - Combine : 65 Auger : Elevator Drive Adjuster [02e13]
03***80Bolt; M16 X 70 (Sub For Z23400), Bolt; M16 X 70, Bolt; M16x701
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm1
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 65 Auger : Grain Elevator [02e01]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x2011
03***90Bolt; M8x16, Bolt; M8 X 20, Bolt; M8 X 16, Bolt, Bolt; M8x15, Bolt; 8x15mm, Bolt; M8x20, Bolt; (Sub For Cq01126), Bolt; M8 X 153
11***09Cotter Pin; (A: If Equipped) 2 X 16 mm, Cotter Pin; (A: 5303 (-Xxxxxx), 5403 (-00***62).) 2 X 16 mm, Cotter Pin; (A: From Sr.No. 5038d(00***62-)) 2 X 16 mm, Cotter Pin; 2 X 16 mm (A), Cotter Pin; (A: For Vandal-Proofing Kit) 2 X 16 mm, Cotter Pin; 2 X 16 mm (Sub For 44***52), Cotter Pin; (C: With Hydraulic Cab Suspension (Hcs)) 2 X 16 mm, Cotter Pin; 2 X 16 mm (Use With R99730), Cotter Pin; (A: From Sr.No 5310s(00***84-), 5410 (00***19-), 5610 (00***01-).) 2 X 16 mm, Cotter Pin; 2 X 16 mm 2.0 X 16 (Sub For T110418), Cotter Pin; 2 X 16 mm (Sub For At258341, 43***27, A762020, Th101639 And 11m7008), Cotter Pin; 2x18mm, Cotter Pin, Cotter Pin; 2 X 16 mm 2x16mm, Cotter Pin; (A) M2 X 16, Cotter Pin; (A) 2 X 16 mm, Cotter Pin; 2 X 16 mm (Sub For T110418), Cotter Pin; (A: Without Cab) 2 X 16 mm, Cotter Pin; (A: Cab Tractors) (B: Oos Tractors) 2 X 16 mm (Sub For 11m7080), Cotter Pin; (B) 2x16mm |, Cotter Pin; (Sub For Ch12316), Cotter Pin; 2 X 16 mm Bellcrank To Valve, Cotter Pin; 2 X 16 mm M2 X 20, Cotter Pin; 2 X 16 mm (Sub 11m7058), Cotter Pin; (A) 2x18mm, Cotter Pin; 2 X 16 mm (K1), Cotter Pin; 2 X 18 mm, Cotter Pin; (A) (B) 2 X 16 mm, Cotter Pin; (A: From Sr.No. 5103s(01***67-), 5104(01***62-), 5204(00***15-)) 2 X 16 mm, Cotter Pin; (A: Open Operator'S Station) 2 X 16 mm, Cotter Pin; (A) 2x16mm, Cotter Pin; (B: 5625 (00***12-), 5725 (00***01-)) 2 X 16 mm, Cotter Pin; 2x16mm, Cotter Pin; 2 X 16 mm, Cotter Pin; 2 X 16mm, Cotter Pin; 2 X 16 mm Power Take-Off Extension, Cotter Pin; (A: 5625 (-00***11), 5725 (-00***00)) 2 X 16 mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 65 Auger : Grain Elevator-Drive With Housing [02e05]
03***95Bolt, Bolt; M8x60, Bolt; M8 X 60, Bolt; (Sub For 03m7245), Bolt; (Sub Vor 03m7245)1
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 65 Auger : Tailings And Clean Grain Auger Housing [02d23]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x206
11***25Cotter Pin; 4 X 65 mm, Cotter Pin; 4x50mm, Cotter Pin, Cotter Pin; 4 X 63 mm, Cotter Pin; 4x65mm, Cotter Pin; 4 X 63 mm, (Shear Protection), Cotter Pin; M4 X 65, Cotter Pin; 4 X 50 mm (Sub For 11h1398), Cotter Pin; 4 X 50 mm (Sub For 11m1398), Cotter Pin; 0.157" X 2.480"2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm6
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 65 Auger : Tailings Auger And Elevator Drive [02e09]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x206
11***17Cotter Pin; 3 X 15 mm, Cotter Pin; (A: With Single Scv) (B: With Dual Scv) 3.200 X 32 mm, Cotter Pin; (B) 3.200 X 32 mm, (Sub For M40461, This Application), Cotter Pin, Cotter Pin; 3.200 X 32 mm, (Sub For Ffsb108266) ( Ffsb110014 Not Used For This Application), Cotter Pin; 3.200 X 32 mm For Short Parallel Arms, Cotter Pin; 3.200 X 32 mm (Sub 11m7017), Cotter Pin; (312), Cotter Pin; 3.200 X 32 mm, (Use 6 With Vane Compactor, 4 Without Vane Compactor), Cotter Pin; 3.200 X 32 mm, 6-Row Narrow, Cotter Pin; 3.200 X 32 mm (Sub For 11***59), Cotter Pin; 3.200 X 32 mm (20 Ft (6 M)), Cotter Pin; (A: Mexico) (B: Turkey) 3.200 X 32 mm, Cotter Pin; 3.200 X 32 mm, (1 And 2 Scv), Cotter Pin; 3.200 X 32 mm, (Sub For Ffsb108266), Cotter Pin; 3,2 X 32 mm, Cotter Pin; 3.200 X 32 mm, None Used, Triple Scv, Cotter Pin; 3,2x32mm, Cotter Pin; 3.200 X 32 mm, 4-Row Narrow And 4-Row Wide, Cotter Pin; (A: 8520 (02***33- )) 3.200 X 32 mm, Cotter Pin; 3x15mm, Cotter Pin; 3.200 X 32 mm (Sub For 11h224), Cotter Pin; 3.200 X 32 mm, Cotter Pin; 3.200 X 32 mm (Sub 11m7083), Cotter Pin; (312) 3,2x32mm, Cotter Pin; 3.200 X 32 mm (Sub For 11m7059), Cotter Pin; 3x35mm, Cotter Pin; 3.200 X 32 mm (Sub For 0700014286), Cotter Pin; (A: Used In 5625hc Tractor Too) 3.200 X 32 mm, Cotter Pin; 3.200 X 32 mm, (Sub For M40461, This Application), Cotter Pin; (A) 3.200 X 32 mm, Cotter Pin; (A: Used In 5425 Orchard Tractor Too) 3.200 X 32 mm, Cotter Pin; (D: Up To Series 2109 ( -Xxxxxx), 2111 ( -Xxxxxx), 2113 ( -07***49), 2115 ( -07***25)) (E: Up To Series 2117 ( -07***35), 2122 ( -07***06), 2126 ( -07***10)) 3.200 X 32 mm, Cotter Pin; (Sub For Ffsb108266) ( Ffsb110014 Not Used For This Application), Cotter Pin; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too) 3.200 X 32 mm, Cotter Pin; 3,2 X 32mm, Cotter Pin; (B: Dual Scv) 3.200 X 32 mm, Cotter Pin; 3.200 X 32 mm, ( Ffsb110014 Not Used For This Application)1
11***24Pin; 4 X 36 mm 4 X 36 mm, Pin, Pin; 4x40mm, Pin; 4x36mm, Pin; 4 X 36 mm, Pin; 4 X 40 mm, Pin; M4 X 40, Pin; 4x30mm (For Z51894), Pin; 4 X 36mm (For Al56439, Al56440), Pin; 4 X 36 mm (For Al55432, Al55433), Pin; 4 X 36mm (For Al55432, Al55433), Pin; 4x36 Gb/79-2000 Zn D, Pin; (A) 4x36mm, Pin; 4 X 36mm, Pin; 5x50mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 65 Auger : Tailings Elevator [02e07]
03***90Bolt; M8x16, Bolt; M8 X 20, Bolt; M8 X 16, Bolt, Bolt; M8x15, Bolt; 8x15mm, Bolt; M8x20, Bolt; (Sub For Cq01126), Bolt; M8 X 153
11***09Cotter Pin; (A: If Equipped) 2 X 16 mm, Cotter Pin; (A: 5303 (-Xxxxxx), 5403 (-00***62).) 2 X 16 mm, Cotter Pin; (A: From Sr.No. 5038d(00***62-)) 2 X 16 mm, Cotter Pin; 2 X 16 mm (A), Cotter Pin; (A: For Vandal-Proofing Kit) 2 X 16 mm, Cotter Pin; 2 X 16 mm (Sub For 44***52), Cotter Pin; (C: With Hydraulic Cab Suspension (Hcs)) 2 X 16 mm, Cotter Pin; 2 X 16 mm (Use With R99730), Cotter Pin; (A: From Sr.No 5310s(00***84-), 5410 (00***19-), 5610 (00***01-).) 2 X 16 mm, Cotter Pin; 2 X 16 mm 2.0 X 16 (Sub For T110418), Cotter Pin; 2 X 16 mm (Sub For At258341, 43***27, A762020, Th101639 And 11m7008), Cotter Pin; 2x18mm, Cotter Pin, Cotter Pin; 2 X 16 mm 2x16mm, Cotter Pin; (A) M2 X 16, Cotter Pin; (A) 2 X 16 mm, Cotter Pin; 2 X 16 mm (Sub For T110418), Cotter Pin; (A: Without Cab) 2 X 16 mm, Cotter Pin; (A: Cab Tractors) (B: Oos Tractors) 2 X 16 mm (Sub For 11m7080), Cotter Pin; (B) 2x16mm |, Cotter Pin; (Sub For Ch12316), Cotter Pin; 2 X 16 mm Bellcrank To Valve, Cotter Pin; 2 X 16 mm M2 X 20, Cotter Pin; 2 X 16 mm (Sub 11m7058), Cotter Pin; (A) 2x18mm, Cotter Pin; 2 X 16 mm (K1), Cotter Pin; 2 X 18 mm, Cotter Pin; (A) (B) 2 X 16 mm, Cotter Pin; (A: From Sr.No. 5103s(01***67-), 5104(01***62-), 5204(00***15-)) 2 X 16 mm, Cotter Pin; (A: Open Operator'S Station) 2 X 16 mm, Cotter Pin; (A) 2x16mm, Cotter Pin; (B: 5625 (00***12-), 5725 (00***01-)) 2 X 16 mm, Cotter Pin; 2x16mm, Cotter Pin; 2 X 16 mm, Cotter Pin; 2 X 16mm, Cotter Pin; 2 X 16 mm Power Take-Off Extension, Cotter Pin; (A: 5625 (-00***11), 5725 (-00***00)) 2 X 16 mm1
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm11
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 65 Auger : Upper Part Of Clean Grain Elevator [02e03]
03***90Bolt; M8x16, Bolt; M8 X 20, Bolt; M8 X 16, Bolt, Bolt; M8x15, Bolt; 8x15mm, Bolt; M8x20, Bolt; (Sub For Cq01126), Bolt; M8 X 156
11***25Cotter Pin; 4 X 65 mm, Cotter Pin; 4x50mm, Cotter Pin, Cotter Pin; 4 X 63 mm, Cotter Pin; 4x65mm, Cotter Pin; 4 X 63 mm, (Shear Protection), Cotter Pin; M4 X 65, Cotter Pin; 4 X 50 mm (Sub For 11h1398), Cotter Pin; 4 X 50 mm (Sub For 11m1398), Cotter Pin; 0.157" X 2.480"1
11***29Cotter Pin; 5 X 36m M, Cotter Pin; (A) 50 X 40 mm, Cotter Pin; 5 X 36 mm, Cotter Pin, Cotter Pin; 5x36mm, Cotter Pin; 5 X 40 mm, Cotter Pin; 50 X 40 mm, Cotter Pin; 5x40mm, Cotter Pin; 5x32mm, Cotter Pin; 5x32mm (Sub For 11m1404), Cotter Pin; 5x361
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 65 Auger : Upper Part Of Tailings Elevator [02e11]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm7
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm8
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M68
See all parts with full part numbers in Heavy Parts AI →
70 Grain Tank
John Deere : 940 - Combine : 70 Grain Tank : Cover-Grain Tank [02e21]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm34
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm3
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M634
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 70 Grain Tank : Extension For Grain Tank [02e20]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm28
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M628
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 70 Grain Tank : Grain Tank Distributing Auger With Housing [02e18]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x2010
03***90Bolt; M8x16, Bolt; M8 X 20, Bolt; M8 X 16, Bolt, Bolt; M8x15, Bolt; 8x15mm, Bolt; M8x20, Bolt; (Sub For Cq01126), Bolt; M8 X 154
11***32Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 70 Grain Tank : Grain Tank [02e16]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x2011
03***90Bolt; M8x16, Bolt; M8 X 20, Bolt; M8 X 16, Bolt, Bolt; M8x15, Bolt; 8x15mm, Bolt; M8x20, Bolt; (Sub For Cq01126), Bolt; M8 X 1512
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm33
See all parts with full part numbers in Heavy Parts AI →
71 Unloading Drive
John Deere : 940 - Combine : 71 Unloading Drive : Grain Tank Unloading Auger [02e24]
03***17Bolt; (312) M10 X 25, Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 X 25 2130, Bolt; (D: Components Of Item Dq73362) M10 X 25, Bolt; (A), Bolt; M10x26, Bolt; M10 X 25 (Sub For Er020630, Appl), Bolt; (A) M10x25, Bolt; M10 X 25 3/8" X 3" Rh (Sub For 03h1658 Or 03h2131), Bolt; (B) M10x25, Bolt; M10 X 25 (Sub For 03m7084), Bolt; M10 X 25, (Sub For 03m7088), Bolt; (312) M10x25, Bolt; M10x25, Bolt; M10 X 25, Bolt; M10 X 25 M10x25, Bolt; M10 X 25 M10 X 25, Bolt, Bolt; (A: With Long Feeder House) M10 X 25, Bolt; M10 X 25, M10x25, Bolt; (A) 10x25mm, Bolt; (A: Rice) M10 X 25, Bolt; M10 X 25 (Sub For Er020630 Appl), Bolt; 10 X 25 mm, Bolt; 10x25mm, Bolt; (B) M10 X 25, Bolt; (A: For Rice) M10 X 253
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm3
14***40Nut; M10 |, Nut; M8 (Sub For 14m7137), Nut; M16, Nut; 10mm, Nut; (Sub For 14m7039), Nut; M8, Nut; 10mm (Sub For 14m7039), Nut; M10, (312) M10, Nut; 10 mm, Nut; M10, 3,2x20mm, Nut; (C) M10, Nut; Ar, 10mm, Nut; M10, (312), Nut; (A: For Rice) M10, Nut; M10, Nut; (B) 8 mm, Nut; Ar, M10, Nut; M10 (Ord W/Sb12585100/0), Nut; M10, M10x25, Nut; 12mm, Nut; (D: Components Of Item Dq73362) M10, Nut; M10 (Sub For 14m7273), Nut; M10 Lh, Nut; (A: Rice Version) M10, Nut; (A: W/ Lateral Tilt) M10, Nut, Nut; (A) M8, Nut; M10, M10, Nut; M10, M12x30, Nut; M10, 11x21x2mm, Nut; M10 (Sub For 14m7039), Nut; (A: Rice) M10, Nut; (A) 10mm, Nut; (A) M10, Nut; M10x50, Nut; M10 M10, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10, Nut; 10x1,5mm, Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M10, Nut; (A: No Longer Required) M10, Nut; (B) M103
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 71 Unloading Drive : Grain Tank Unloading-Drive [02f01]
03***17Bolt; (312) M10 X 25, Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 X 25 2130, Bolt; (D: Components Of Item Dq73362) M10 X 25, Bolt; (A), Bolt; M10x26, Bolt; M10 X 25 (Sub For Er020630, Appl), Bolt; (A) M10x25, Bolt; M10 X 25 3/8" X 3" Rh (Sub For 03h1658 Or 03h2131), Bolt; (B) M10x25, Bolt; M10 X 25 (Sub For 03m7084), Bolt; M10 X 25, (Sub For 03m7088), Bolt; (312) M10x25, Bolt; M10x25, Bolt; M10 X 25, Bolt; M10 X 25 M10x25, Bolt; M10 X 25 M10 X 25, Bolt, Bolt; (A: With Long Feeder House) M10 X 25, Bolt; M10 X 25, M10x25, Bolt; (A) 10x25mm, Bolt; (A: Rice) M10 X 25, Bolt; M10 X 25 (Sub For Er020630 Appl), Bolt; 10 X 25 mm, Bolt; 10x25mm, Bolt; (B) M10 X 25, Bolt; (A: For Rice) M10 X 254
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x206
03***04Bolt; M10 X 70 M10x70 (8.8), Bolt; M10x70, Bolt; M10 X 70, Bolt; (E) M10 X 70, Bolt; M10 X 70 (E), Bolt; M10 X 70 (A), Bolt; (A) M10 X 70, Bolt; 10 X 70 mm, Bolt; M10 X 70 (Use With Ah211617), Bolt; M10 X 70 (B)1
See all parts with full part numbers in Heavy Parts AI →
72 Unloading Auger
John Deere : 940 - Combine : 72 Unloading Auger : Unloading Auger [02f06]
03***17Bolt; (312) M10 X 25, Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 X 25 2130, Bolt; (D: Components Of Item Dq73362) M10 X 25, Bolt; (A), Bolt; M10x26, Bolt; M10 X 25 (Sub For Er020630, Appl), Bolt; (A) M10x25, Bolt; M10 X 25 3/8" X 3" Rh (Sub For 03h1658 Or 03h2131), Bolt; (B) M10x25, Bolt; M10 X 25 (Sub For 03m7084), Bolt; M10 X 25, (Sub For 03m7088), Bolt; (312) M10x25, Bolt; M10x25, Bolt; M10 X 25, Bolt; M10 X 25 M10x25, Bolt; M10 X 25 M10 X 25, Bolt, Bolt; (A: With Long Feeder House) M10 X 25, Bolt; M10 X 25, M10x25, Bolt; (A) 10x25mm, Bolt; (A: Rice) M10 X 25, Bolt; M10 X 25 (Sub For Er020630 Appl), Bolt; 10 X 25 mm, Bolt; 10x25mm, Bolt; (B) M10 X 25, Bolt; (A: For Rice) M10 X 254
11***41Cotter Pin; 8 X 60 mm, Cotter Pin; 8x56mm1
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm3
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 72 Unloading Auger : Unloading Housing [02f04]
03***94Bolt; (B: W/ Wiper) M8 X 30, Bolt; M8 X 30 (Sub For 03m7186), Bolt; M8x30, Bolt, Bolt; M8 X 30, Bolt; M8 X 30, Ar, Bolt; Ar, 8 X 30 mm (For Az15706, Az15715), Bolt; (312) M8 X 30, Bolt; (B: W/ Wiper) M8 X 30 (Use With Rw26983), Bolt; 8x30mm, Bolt; M8 X 30 (In Slot Closest To Engine)2
11***22Cotter Pin; M4 X 30, Cotter Pin; 4x30mm, Cotter Pin; 4 X 28 mm, Cotter Pin; 4 X 30 mm |, Cotter Pin; 4x28mm, Cotter Pin; 4 X 30 mm, Cotter Pin; (A) 4x28mm, Cotter Pin; 4 X 28 mm, (Sub For 11h222), Cotter Pin1
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 72 Unloading Auger : Unloading Tube Support [02f08]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm2
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M62
See all parts with full part numbers in Heavy Parts AI →
75 Side Walls, Rear Hood
John Deere : 940 - Combine : 75 Side Walls, Rear Hood : Floor Pannels, Engine Compartment [02f20]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm18
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm20
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm16
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 75 Side Walls, Rear Hood : Floor Pannels, Engine Compartment [02f22]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm24
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm24
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm16
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 75 Side Walls, Rear Hood : Rear Side Panels And Cover [02f16]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x201
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm18
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm53
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 75 Side Walls, Rear Hood : Rear Side Panels With Operator'S Platform Ladder [02f18]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm18
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm55
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm12
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 75 Side Walls, Rear Hood : Side Panels [02f10]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x2014
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm6
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm14
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 75 Side Walls, Rear Hood : Side Panels [02f12]
03***54Bolt; M8 X 12, Bolt, Bolt; M8x20, Bolt; (B: With Short Feeder House) M8 X 20, Bolt; (A) M8 X 20, Bolt; 8x20mm, Bolt; (A) M8 X 12, Bolt; 8 X 20 mm, Bolt; (A), Bolt; M8x15, Bolt; (C), Bolt; (312), Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20 M8x20, Bolt; M8 X 20, Bolt; M8 X 20 (Use With H117952), Bolt; (B), Bolt; M8 X 20 M8 X 20, Bolt; Ar, M8x20, Bolt; M7 X 20, Bolt; M8x20 |, Bolt; (B) M8 X 20, Bolt; Ar M8x2014
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm6
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm14
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 75 Side Walls, Rear Hood : Straw Cover For Cross Shaker [02f14]
11***13Cotter Pin; (A) 3x20mm, Cotter Pin; 3x2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x18mm (Sub For 34m7010), Cotter Pin; 3x10mm, Cotter Pin; 3x18mm, Cotter Pin; M3 X 20, Cotter Pin; 3,2 X 18 mm, Cotter Pin; 3.200 X 18 mm, Cotter Pin; 3x20mm, Cotter Pin; (A) 3,2x20mm, Cotter Pin, Cotter Pin; 3 2x18mm, Cotter Pin; 3,2x18mm, Cotter Pin; M3,2 X 20, Cotter Pin; 3 X 2 X 20 mm, Cotter Pin; 3,2 X 20 mm, Cotter Pin; 3 X 10 mm3
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm12
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm17
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 75 Side Walls, Rear Hood : Straw Warning Device, Rear [02f24]
76 Guards
John Deere : 940 - Combine : 76 Guards : Guards Left-Hand [02g02]
03***17Bolt; (312) M10 X 25, Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 X 25 2130, Bolt; (D: Components Of Item Dq73362) M10 X 25, Bolt; (A), Bolt; M10x26, Bolt; M10 X 25 (Sub For Er020630, Appl), Bolt; (A) M10x25, Bolt; M10 X 25 3/8" X 3" Rh (Sub For 03h1658 Or 03h2131), Bolt; (B) M10x25, Bolt; M10 X 25 (Sub For 03m7084), Bolt; M10 X 25, (Sub For 03m7088), Bolt; (312) M10x25, Bolt; M10x25, Bolt; M10 X 25, Bolt; M10 X 25 M10x25, Bolt; M10 X 25 M10 X 25, Bolt, Bolt; (A: With Long Feeder House) M10 X 25, Bolt; M10 X 25, M10x25, Bolt; (A) 10x25mm, Bolt; (A: Rice) M10 X 25, Bolt; M10 X 25 (Sub For Er020630 Appl), Bolt; 10 X 25 mm, Bolt; 10x25mm, Bolt; (B) M10 X 25, Bolt; (A: For Rice) M10 X 252
03***84Bolt; (A) M10x25, Bolt; Ar, M10 X 25, Bolt; (A) M10 X 25, Bolt; M10x25, Bolt; 10x25mm, Bolt; 10x25mm (Sub For 03m7088), Bolt; M10 X 25 |, Bolt; M10 X 25, Bolt; 10 X 25 mm, Bolt; 10x25mm (Sub For 3m***88), Bolt; (B) M10x25, Bolt; 10x25mm (Sub For 03m7088 Appl)2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm10
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 76 Guards : Guards Left-Hand [02g04]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm4
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M64
21***31Screw; M6x16, Screw; (A) M6x15, Screw; M6 X 15, Screw; M6x15, Screw; M6 X 15 M6 X 15, Screw; 6x15mm, Screw; M6 X 16, Screw; 6 X 15 mm, Screw; 6x15, Screw; (B) M6 X 15, Screw; (A) M6x18, Screw; M6x18, Screw; M6 X15, Screw; M6 X 12, Screw; (A) M6 X 15, Screw; M6x124
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 76 Guards : Guards Right-Hand [02g09]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm14
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M614
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 76 Guards : Guards Rigth-Hand [02g07]
03***68Bolt; M6 X 20 (Use With Re47041 Or Se500467), Bolt; M6 X 20, Bolt; M6x20, Bolt, Bolt; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) M6 X 20, Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6 X 20, Bolt; M6 X 20 M6 X 20, Bolt; (C), Bolt; M6 X 20 (Use With Re47042), Bolt; (A: 6076arw04 W/ "Ep9" Nippondenso) M6 X 20, Bolt; M6 X 20, Bolt; M6 X 20 (Use With Re47037), Bolt; 6x20mm4
03***93Bolt; (C), Bolt; M8 X 25 (In Slot Farthest From Engine), Bolt; M8 X 25 (Use With L.H. Aa65315), Bolt; (A: With Long Feeder House) M8 X 25, Bolt; M8x35, Bolt, Bolt; (A: Syncshuttle Transmission - 5420: Sn -44***42, 5520: Sn -45***03) M8 X 25, Bolt; (B), Bolt; M8 X 25 M8x25, Bolt; M8 X 25 (Square Neck), Bolt; (A: Syncshuttle Transmission - 5220: Sn -42***29, 5320: Sn -43***72) M8 X 25, Bolt; (A: Syncshuttle Transmission - 5420: Sn 44***43-, 5520: Sn 45***04-) M8 X 25, Bolt; (B) M8 X 25, Bolt; M8 X 25 (Use With L.H. Aa57459), Bolt; M8 X 25 M8 X 25, Bolt; (A: Lateral Tilt) M8 X 25, Bolt; M8 X 25, Bolt; (A), Bolt; M8 X 25 (Not Used This Application), Bolt; 8x25mm, Bolt; M8x252
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 76 Guards : Protections Shield, Fan "Corn" [02g06]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm6
14***29Nut; M8, Nut; (A) 8mm, Nut; 950, M8, Nut; M8, 6,6x12,5x1,6, Nut; (A) M8 (Sub For 14m7137), Nut; (A: Area Counter Support, R.H. Side) M8, Nut; M8 Includes Dq11813 And Dq12055, Nut; M6, Nut; (A) ,M8, Nut; M8 M8x16, Nut; (A) M8, Nut; M8, 8, Nut; (C) M8, Nut; X M8, Nut; X M8, Nut; M8, (312), Nut; M8 (Sub For Sb12293201/0), Nut; Ar, M8, Nut; (A: Rice/Corn) M8, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8, Nut; 8mm, Nut; 960, M8, Nut; M8 (Sub For 14m7137), Nut; M8 (Sub For 14m6825), Nut; 970, M8, Nut; (B), Nut; M8 Use With Az17518, Nut; Lh, M8, Nut; M8, M, Nut; M8 (For Al63397), Nut; M8, M8, Nut; M8 (Sub For 14m7137, 14m7140), Nut; M8, Use W/ Az17516 - Az17518, Nut; M8, (Use With Az17518), Nut; M9, Nut; (B) M8, Nut; 5/16" 8mm, Nut; 930, M8, Nut; (B: Without Lateral Tilt) M8, Nut; M8 |, Nut; M8, M12x35, Nut; (A: Rice Version) M8, Nut; M10, Nut; M8, M8, 8mm, Nut; Ar, Lh, M8, Nut; 8x1,25mm, Nut; M8, (10.9), Nut; 8 mm, Nut; Ar M8, Nut; M8 X 20, Nut; 940, M8, Nut; M8, 940w/ 343, Nut; 8mm (Sub For 14m7137), Nut; M8, 8x7mm, Nut; M8, (312) M8, Nut; (A: For Usa Only) M8, Nut; M8, 8mm, Nut; M8 M8, Nut, Nut; M8, (312) M10, Nut; (A) (B) M8, Nut; (A: Discharge Spout (High Arc)) M8, Nut; Ar L.H. M8, Nut; M8, (B), Nut; (B: For Usa Only) M84
See all parts with full part numbers in Heavy Parts AI →
77 Side Cover
John Deere : 940 - Combine : 77 Side Cover : Engine Rear Panel [02g16]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm18
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm8
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M66
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 77 Side Cover : Side Cover, Left-Hand [02g14]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm2
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm20
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 77 Side Cover : Side Cover, Rigth-Hand [02g12]
11***13Cotter Pin; (A) 3x20mm, Cotter Pin; 3x2x20mm, Cotter Pin; 3,2x20mm, Cotter Pin; 3 X 20 mm, Cotter Pin; 3x18mm (Sub For 34m7010), Cotter Pin; 3x10mm, Cotter Pin; 3x18mm, Cotter Pin; M3 X 20, Cotter Pin; 3,2 X 18 mm, Cotter Pin; 3.200 X 18 mm, Cotter Pin; 3x20mm, Cotter Pin; (A) 3,2x20mm, Cotter Pin, Cotter Pin; 3 2x18mm, Cotter Pin; 3,2x18mm, Cotter Pin; M3,2 X 20, Cotter Pin; 3 X 2 X 20 mm, Cotter Pin; 3,2 X 20 mm, Cotter Pin; 3 X 10 mm2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm23
See all parts with full part numbers in Heavy Parts AI →
85 Trailer For Headers
John Deere : 940 - Combine : 85 Trailer For Headers : Axle Bearing Cutting Platform [02g19]
11***24Pin; 4 X 36 mm 4 X 36 mm, Pin, Pin; 4x40mm, Pin; 4x36mm, Pin; 4 X 36 mm, Pin; 4 X 40 mm, Pin; M4 X 40, Pin; 4x30mm (For Z51894), Pin; 4 X 36mm (For Al56439, Al56440), Pin; 4 X 36 mm (For Al55432, Al55433), Pin; 4 X 36mm (For Al55432, Al55433), Pin; 4x36 Gb/79-2000 Zn D, Pin; (A) 4x36mm, Pin; 4 X 36mm, Pin; 5x50mm2
14***02Nut; (B: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4", Slotted, Fine Thread, Nut; 1/4", Nut; 3/4" 3/4" Slotted, Nut; 3/4" 3/4", Slotted, Nut; 3/4", Unf, Nut; (C: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4'(For Al34936), Nut; 3/4" (Slotted), Nut; 3/4" 2wd, Nut; (A: Slotted) 3/4", Nut; 18mm, Nut; 3/4", (Slotted), Nut; 3/4", (Sub 14h1086), Nut; 3/4" 3/4", Nut; 3/4", Unf., Nut; 5/8", Nut; Slotted, Nut; 3/4" 3/4" Unf, Nut; No. 0.210, Nut; 3/4", Nut; 3/4", (U/W Heavy Duty Dual Axle), Nut; 3/4" Hex Slotted, Nut; (A: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4"(For Al34935), Nut; (A), Nut; (A) 3/4", Nut; (A) (B) 3/4", Nut; Rh, Lh, Nut; 19.050 mm (3/4") 3/4", Slotted, Nut; 3/4" (Sub 14h902,This Application And11h237), Nut; 3/4', Slotted, Nut; 5/8", Rh, Lh, Nut; (B: (Regular Duty) Two-Wheel Drive) (C: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/8", Td, Nut; 5/8" Rh, Lh, Nut; (A: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4" (Use With An232006), Nut; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 3/4", Nut; 3/4", Unf, Slotted, Nut; 19.050 mm (3/4"), Nut; 3/4" Slotted, Nut; 3/4" Unf, Nut, Nut; 3/4" Unf, Slotted, Nut; Rh, 5/8", Nut; 19.050 mm (3/4") (Sub 14h1086), Nut; 3/4" (Sub For 14h904, This Application) (Use With 11h237), Nut; 3/4", Slotted, Unf, Nut; 3/4", Slotted, Nut; 3/4" Unf Slotted2
40***64Snap Ring; 52 X 2 mm, Snap Ring, Snap Ring; 52x2mm, Snap Ring; 50x2mm, Snap Ring; 50 X 2 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 85 Trailer For Headers : Chassis Cutting Platform Trailer [02g21]
03***87Bolt; M10 X 38, Bolt; 10x38mm2
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 85 Trailer For Headers : Rear Litght Bracket [02g23]
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm5
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm2
14***27Nut; M6, 6mm, Nut; Ar, M6, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M6, Nut; M6, Nut; M6 M6, Nut; (A) (B) M6, Nut; M6 |, Nut; 1/4", Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M6, Nut; 6mm., Nut; (A: Rice Version) M6, Nut; M6, (312) M6, Nut; (A), Nut; 6mm (Sub For 14h786), Nut; (A: Rice/Corn) M6, Nut; M6 (Sub For L48705), Nut; M6 (Sub For 14h786), Nut; M6, Ar, Nut; (B: With Cab) M6, Nut; (A) 6mm, Nut; 6mm, Nut, Nut; M6x16, Nut; 6 mm, Nut; M6, Export/Exportacion/Export, Nut; M6, M6, Nut; 8mm, Nut; 6x1mm, Nut; 6m, Nut; M6 (Sub For 14m7136), Nut; (B: 2066 Air Conditioning With Heat Diffuser) M6, Nut; (A: W/ Straw Chopper) M6, Nut; M8, Nut; (A) M6, Nut; 6mm (Sub For 14h786 Appl), Nut; M6, (312), Nut; M6 A, Nut; (B) M65
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 85 Trailer For Headers : Trailer Drawbar/Socket [02h01]
12***11Lock Washer; 5,1mm, Lock Washer; 5mm (Sub For 12m3998), Lock Washer; 5mm, Lock Washer; 5 mm M5, Lock Washer; 5mm (Sub For 12h246), Lock Washer; 5 mm (Order 12m7064), Lock Washer; 6mm, Lock Washer; 5,5mm, Lock Washer; (A) 5 mm, Lock Washer; 0.197", Lock Washer; Ar, 5mm, Lock Washer; 5 mm (Sub 12m7064), Lock Washer; M5, Lock Washer; 5 X 9,2 X 1,2 mm, Lock Washer; 5 mm, (Sub 12m7064), Lock Washer; 5,100mm, Lock Washer; (A: For Austria Only) 5 mm, Lock Washer; 5 mm, Lock Washer, Lock Washer; 5 mm A5, Lock Washer; 5 mm, (Use With Re19187), Lock Washer; (A) M5, Lock Washer; 5mm (Sub For L29166), Lock Washer; M10, Lock Washer; 2-916-680-004, Lock Washer; 5 1mm, Lock Washer; (A) 5mm3
12***14Lock Washer; M12, Lock Washer; (C: For Commandcenter) 12 mm, Lock Washer; Ar, 12 mm, Lock Washer, Lock Washer; M12x40, Lock Washer; (A) 12 mm, Lock Washer; 12 M |, Lock Washer; (W/ (8) Z10862, (16) Z10852, Z10861), Lock Washer; (W/ (8) Z10862 W/ (16) Z10862 And Z10861), Lock Washer; 12 mm A12, Lock Washer; 12 mm, Ar,L.H., Lock Washer; 12 mm, Lock Washer; 12mm, Lock Washer; (A) 12mm, Lock Washer; 12m, Lock Washer; 12 X 21,1 X 2,5 mm, Lock Washer; (A) (B) (C), Lock Washer; 10 mm, Lock Washer; 6 mm, Lock Washer; 10mm, Lock Washer; (8) W/ Z10862, (16) W/ Z10862 And Z10861)8
14***28Nut; (B) M5, Nut; M5, (312) M5, Nut; M5 (Sub For Al69700), Nut; (A: For Austria Only) M5, Nut; M5, Nut; Ar, 5mm, Nut; 5 mm (Sub For 14h778), Nut; M5 (Sub For 14h778), Nut; (A) M5, Nut; M5 (Sub For 14m3241), Nut; 5 mm, Nut; (B) 5mm, Nut; (C) 5mm, Nut; M5 Lh, Rh, Nut, Nut; 5mm, Nut; (A) 5mm (Sub For 14h631), Nut; Ar, M5, Nut; M5 |, Nut; M5, M5, Nut; (C) M5, Nut; M5 M5, Nut; 5mm (Sub For 14m7021), Nut; (A) 5mm, Nut; 5x0,8mm, Nut; M5 (Sub For L48704)3
See all parts with full part numbers in Heavy Parts AI →
86 Straw Spreader
John Deere : 940 - Combine : 86 Straw Spreader : Straw Spreader Blades [02h06]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm12
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm10
14***85Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00***30; 8760-00***21) 5/16", Nut; (A: (-Xxxxxx) 4650-01***35) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-00***90; 8760-00***99; 8960-00***96) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-00***45; 4250-01***92; 4450-02***58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 86 Straw Spreader : Straw Spreader Blades [02h10]
03***28Bolt; (A) M8x20, Bolt; M8x20, Bolt, Bolt; (A) M8 X 20, Bolt; (A: Use Only For Kernel Processor Quick Conversion) M8 X 20, Bolt; 8x20mm, Bolt; M8 X 208
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm14
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm6
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 86 Straw Spreader : Straw Spreader Drive [02h04]
12***04Part Missing In Wise; 3/8", Outer, Part Missing In Wise; (A: Not Required) 3/8", Part Missing In Wise; (E) 3/8", Part Missing In Wise; 3/8" (B) (C), Part Missing In Wise; 3/8" (Not Longer Required), Part Missing In Wise; (C: (-Xxxxxx) 4050-00***92; 4250-01***53; 4450-02***81) 3/8" (Sub For R53668), Part Missing In Wise; 3/8", (Use With 19h3219) (Not Required With E55662), Part Missing In Wise; 3/8" (4050), Part Missing In Wise; 3/8", (Sub For Mg80679), Part Missing In Wise; 3/8", (Code 3904), Part Missing In Wise; 3/8" (B), Part Missing In Wise; (A: 5103e/5104/5204/5038d(00***01-), 5103/5103s(00***91-), 5203(00***82-).) 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With H108673), Part Missing In Wise; 3/8" (Saran Cd), Part Missing In Wise; 3/8", (Rs, Ut, Or), Part Missing In Wise; (B) (C) 3/8", Part Missing In Wise; 3/8", (Delco Remy), Part Missing In Wise; (B: Hi-Crop) 3/8", Part Missing In Wise; 3/8", (Not Used With E55662), Part Missing In Wise; (B: W/O Sound-Gard Body) 3/8", Part Missing In Wise; 3/8" (Use With R59409), Part Missing In Wise; 3/8", (Code 1601 And 1610), Part Missing In Wise; 3/8" (Pulley To Fan Spacer) Code 2314 (Af Only), Part Missing In Wise; (A) Roosa Master Dp,3/8", Part Missing In Wise; 3/8" (Sub For Ar52325), Part Missing In Wise; (A: From Sr.No.5103e/5103/5103s/5203-12***72, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; (C: Not Required) 3/8", Part Missing In Wise; 3/8" (913, 915, 918 And 924), Part Missing In Wise; 3/8", (Ru And Or), Part Missing In Wise; 3/8", (Rs), Part Missing In Wise; (B: (Xxxxxx-) 4555-01***00; 4755-01***01; 4955-01***49) 3/8", Part Missing In Wise; 3/8" (Radiator Brace Strut), Part Missing In Wise; X X (A) 3/8", Lock Washer; 3/8", Part Missing In Wise; (A) 3/8", (Use With R59409), Part Missing In Wise; 3/8", (Code 3102) (Not Req. W/E55662), Part Missing In Wise; 3/8", (Sub For Mg80680 And Mg80702), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8", (No Longer Required With 19h1936), Part Missing In Wise; 3/8", (Not Required With E55661), Part Missing In Wise; 3/8" (Without Dial-A-Matic), Part Missing In Wise; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Part Missing In Wise; 3/8", (Ru), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Part Missing In Wise; 3/8" Rh, Part Missing In Wise; 3/8" (Use With R53382), Part Missing In Wise; 9.525 mm (3/8") (854a, -61***50; 1253a, -61***00), Part Missing In Wise; 3/8", (Not Req. W/E55662 Or 14h1090), Part Missing In Wise; 3/8" (Use With 14h812), Part Missing In Wise; 3/8", (Not Required W/E55662), Part Missing In Wise; (B: (Xxxxxx-) Serial No. 8450-00***19; 8650-00***98) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) 3004 And 3005, Part Missing In Wise; 3/8", (Code 4102), Part Missing In Wise; 3/8" (Use With 19h3267), Part Missing In Wise; 3/8", 6216, Part Missing In Wise; 3/8", (Not Required W/ E55662), Part Missing In Wise; (A: (-Xxxxxx) 4250-00***71; 4450-01***05) 3/8", Part Missing In Wise; (No Longer Required With R41041), Part Missing In Wise; 3/8", (Standard Models), Lock Washer; 3/8", (Use With 19h2284) (Use With 19h2284), Part Missing In Wise; 3/8" Hi-Crop, Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***48; 8650-00***90) 3/8", Part Missing In Wise; 3/8" W/Rg, Part Missing In Wise; 3/8" (Sub For Mg80680), Part Missing In Wise; (B: (-Xxxxxx) 4650-00***55; 4850-00***27) 3/8", Part Missing In Wise; 3/8", 730 Tractor, Part Missing In Wise; 3/8", For 12' Harrow, Part Missing In Wise; 3/8" (Less Power Take-Off), Part Missing In Wise; 3/8", (Use With R191204), Part Missing In Wise; 3/8" 3/8" X 3/4", Part Missing In Wise; (A) 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Nlr For E55662), Part Missing In Wise; 3/8", (Not Used On 570), Part Missing In Wise; 3/8", (22 Used, Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", For 3179dl016, Part Missing In Wise; 3/4", Part Missing In Wise; (Use With 14h1076), Part Missing In Wise; 3/8", (Diesel), Part Missing In Wise; 3/8", (No Longer Required With 19h3483), Part Missing In Wise; 3/8", Roll Top, Part Missing In Wise; (B: 2 Used Dual, 3 Used Triple) 3/8", Part Missing In Wise; 3/8", (Use With Ar87023 Or Ar87024), Part Missing In Wise; 3/8", Code 2311 (Af, Af001) (Pulley To Fan Spacer), Part Missing In Wise; (A: Less Rockshaft) 3/8", Part Missing In Wise; (C: (-Xxxxxx) 4050-00***92; 4250-01***53; 4450-02***81) 3/8", Part Missing In Wise; 3/8", (Manual), Part Missing In Wise; 3/8" 3/8" Ar, Part Missing In Wise; 3/8", (Orchard Fenders), Part Missing In Wise; (A: Less Power Take-Off) 3/8", Part Missing In Wise; 3/8", Use With Furrower, Part Missing In Wise; (A: Code 1701 Air Intake Medium) (B: Code 1702 Air Intake 10") (D: Code 1704 Air Intake 12") (E: Code 1709 W/ Air Cleaner) 3/8", Part Missing In Wise; (A) (B) (C) 3/8", Part Missing In Wise; 3/8", Code 2311(Tf), Part Missing In Wise; (A) (C) (E) 3/8", Part Missing In Wise; (C: Use With Ar55639, Ar62267, Ar77254, Re13722, Re41875, Ty6701, Ty6710 And Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", (Use With R90994), Part Missing In Wise; 3/8", (Sub For T11088), Part Missing In Wise; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Part Missing In Wise; 3/8", (Not Req. W/ E55662), Part Missing In Wise; 3/8" (Use With R55396), Part Missing In Wise; 3/8", (3 Used 4640 (B)) (2 Used 4840), Part Missing In Wise; 3/8" (With Dial-A-Matic), Part Missing In Wise; 3/8, Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf), Part Missing In Wise; 3/8", (2 On Level Land;1 On Sidehill), Part Missing In Wise; 3/8" (Use With 19h2284), Part Missing In Wise; 3/8" (Not Shown), Part Missing In Wise; 3/8" (For Ar68802), Part Missing In Wise; (C) 3/8", (Not Required With E55662), Part Missing In Wise; 9.525 mm, (Saran Cd), Part Missing In Wise; 3/8" Na, Part Missing In Wise; 3/8", (Used With Gresen Valve), Part Missing In Wise; 3/8" (920, 922, 925 And 930), Part Missing In Wise; 3/8", For 3.0 M (10') Size, Part Missing In Wise; 3/8", (Not Required With E55662) (3011, 3016), Part Missing In Wise; 3/8", (Use With Re30427), Part Missing In Wise; 3/8", For 8-Tooth Section, Part Missing In Wise; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Part Missing In Wise; 3/8", (5 Used Syncro-Range) (6 Used Power Shift), Part Missing In Wise; (B: Less Rockshaft) 3/8", Part Missing In Wise; 3/8", (Use With T25701), Part Missing In Wise; 3/8", (4 Used Dual Selective Control), Part Missing In Wise; 3/8" (Rigid), Part Missing In Wise; 3/8", (Use With 24m7096), Part Missing In Wise; (A: (-Xxxxxx) 4650-00***65; 4850-00***01 (Pst)) 3/8", Part Missing In Wise; 3/8" (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Alternator To Dash), Part Missing In Wise; (Nlr With R41041), Part Missing In Wise; 3/8", (Hb-G, Gh-01), Part Missing In Wise; 3/8", (4 Used (A)) (6 Used (B)), Part Missing In Wise; 3/8", (Use With R82180 Or R100676) Code 2501 And 2503, Part Missing In Wise; 3/8", (Rc And St), Part Missing In Wise; 3/8", (Use With 19h2284), Part Missing In Wise; 3/8" (132", -68***74; 154", -68***09), Part Missing In Wise; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Part Missing In Wise; 3/8", (Or), Part Missing In Wise; 3/8", (Use With 19h3219), Part Missing In Wise; 9.525 mm (3/8"), Part Missing In Wise; 3/8", (Rs, Ru, Rus, Ut, Or), Part Missing In Wise; 3/8" (Use With At24256 Or At31394), Part Missing In Wise; 3/8" (No Longer Required), Part Missing In Wise; 3/8", For 915, Part Missing In Wise; 3/8" (For 19h2676, 19h1648), Part Missing In Wise; 3/8", (Adjustable Rear Axle), Part Missing In Wise; 3/8" (918 Rigid), Part Missing In Wise; (C: 42" Tire) 3/8", Part Missing In Wise; 3/8", (Use With R82180 Or R100676), Part Missing In Wise; 3/8", (Use With H108673), Part Missing In Wise; 3/8", (Not Req. With E55662), Part Missing In Wise; 3/8", (2 Used Single Selective Control) (4 Used Dual Selective Control), Part Missing In Wise; (Sub For R53668), Part Missing In Wise; 3/8", For 3.7 M (12') Size, Part Missing In Wise; 3/8" (For R57059), Part Missing In Wise; 3/8" (Nlr), Part Missing In Wise; (A: (-Xxxxxx)4755-01***03;4955-01***24) 3/8", Part Missing In Wise; 3/8" (Sgb), Part Missing In Wise; 3/8", (120 Used L.H.) (120 Used R.H.), Part Missing In Wise; 3/8" (Less Rockshaft), Part Missing In Wise; 3/8", (Use With H149504), Part Missing In Wise; 3/8", 2350, Part Missing In Wise; 3/8", (Code 2819), Part Missing In Wise; 3/8", (Cable), Part Missing In Wise; (A: Code 2501) (B: Code 2502) 3/8", Part Missing In Wise; 3/8", (Cab), Part Missing In Wise; 3/8" 918 (65***01-) 75 Used, Part Missing In Wise; 3/8", (1 Used L.H.) (1 Used R.H.), Part Missing In Wise; (Lu) (Orchard Fenders), Part Missing In Wise; 3/8", (Dn-02), Part Missing In Wise; 3/8" (Sub For (2) Mg80680), Part Missing In Wise; 3/8" (Use With R53396), Part Missing In Wise; 3/8", (Not Req. W/E55662), Part Missing In Wise; Ar, 3/8", Part Missing In Wise; 3/8", (Code 2111 And 3904), Part Missing In Wise; 3/8", (Use With Am124305 Front Frame), Part Missing In Wise; 3/8" (Code 4101), Part Missing In Wise; 3/8" (Level Land), Part Missing In Wise; 3/8" 3/8", Part Missing In Wise; (A: Mexico) (B: Turkey) 3/8", Part Missing In Wise, Part Missing In Wise; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Not Required With E55662), Part Missing In Wise; 3/8" (No Longer Required With R41041), Part Missing In Wise; 3/8", (Sub For T12634), Part Missing In Wise; 3/8", (Lp-Gas), Part Missing In Wise; 3/8", Used With Steel Moldboard, Part Missing In Wise; 3/8" Nla, Part Missing In Wise; 3/8", For 600 And 610, Part Missing In Wise; (B: Engine Serial No.) 3/8", Part Missing In Wise; (B: Radar Bracket To Transmission Sump Line Shield Bracket Screw) 3/8", Part Missing In Wise; 3/8", (A), Part Missing In Wise; (A) 3/8", Mechanical Front Wheel Drive, Part Missing In Wise; 3/8" (Not Required With E55662), Part Missing In Wise; 3/8", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Part Missing In Wise; 3/8", Ar, Part Missing In Wise; (B: (Xxxxxx-) Esn 4650-32***15; 4850-32***46) 3/8", Part Missing In Wise; (A: From Sr.No. 5038d(00***62-)) 3/8", Part Missing In Wise; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Part Missing In Wise; (A: From Sr.No.5103s/5203-12***72, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Part Missing In Wise; 3/8" (Sgb) Nlr, Part Missing In Wise; (A: Power Shift Transmission) 3/8", Part Missing In Wise; 3/8", (Sub K40003, This Application Only), Part Missing In Wise; (A: W/O Sound-Gard Body) 3/8", Part Missing In Wise; (K) 3/8", Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 24" X 8" X 14" 20pr Tire) 3/8" (E) (G), Part Missing In Wise; 3/8" (Flexible), Part Missing In Wise; (B: (Xxxxxx-) 4560-00***21; 4760-00***79; 4960-00***06) 3/8", Part Missing In Wise; 3/8", (Sub For R53668), Part Missing In Wise; (A) (B) 3/8", Part Missing In Wise; 3/8", Internal Tooth, Part Missing In Wise; 3/8", (Ea-G, Ge-01), Part Missing In Wise; 3/8" (Use With Delco-Remy), Part Missing In Wise; 3/8", Code 2314 (Af Only), Part Missing In Wise; 3/8" (4 Used, Rh; 5 Used, Lh), Part Missing In Wise; (A: Use With Ar87205) 3/8", Part Missing In Wise; 3/8", (Use With 14h1076 And 19h3239), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***13; 8650-00***23) 3/8", Part Missing In Wise; 3/8", For Spike-Tooth Sections, Part Missing In Wise; 3/8" (W/O Sgb), Part Missing In Wise; 3/8", (Use With 19h3239), Part Missing In Wise; (C: 3 Used Triple, 4 Used Quad) 3/8", Part Missing In Wise; 3/8" (Use With Re61087), Lock Washer; 3/8", (Use With R125195), Part Missing In Wise; X, Part Missing In Wise; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Part Missing In Wise; 3/8", (Use With Re33058), Part Missing In Wise; 3/8", (Nlr), Part Missing In Wise; (A: For Steel Moldboard) 3/8", Part Missing In Wise; (A: W/O Sgb) 3/8", Part Missing In Wise; 3/8", (Less Power Steering), Part Missing In Wise; 3/8", (Use With R59409 Or R81072), Part Missing In Wise; 3/8", For 4.6 M (15') Size, Part Missing In Wise; 3/8" (Sub T56055), Part Missing In Wise; (A: For Switzerland Only) 3/8", Part Missing In Wise; 3/8", (Mower Bar Only), Part Missing In Wise; (A) (B) (C) (D) 3/8", Part Missing In Wise; (Orchard Fenders), Part Missing In Wise; (A: (-Xxxxxx) 4650-01***77; 4850-01***15) 3/8", Lock Washer; 9.525 mm (3/8"), Part Missing In Wise; 3/8", 1350, Part Missing In Wise; 3/8", (Use With 19h2104 And 19h2855), Part Missing In Wise; 3/8", (Code 3903), Part Missing In Wise; 3/8", For 400, Part Missing In Wise; 3/8" To Secure Battery Cables To Frame, Part Missing In Wise; 3/8", For 15'3" Harrow, Part Missing In Wise; 3/8" (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; 3/8" (A), Part Missing In Wise; 3/8" (Use With 19h3239), Part Missing In Wise; 3/8", Terminal, Part Missing In Wise; 3/8" (Not Required W/E55662), Part Missing In Wise; 3/8", For 3179dl001, Part Missing In Wise; (A) 3/8", Part Missing In Wise; 3/8" (Use With H149504), Part Missing In Wise; 3/8" (Sub For R53668), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***53; 8650-00***74) 3/8", Part Missing In Wise; (A: (-Xxxxxx) Esn 4650-32***14; 4850-32***45) 3/8", Part Missing In Wise; 3/8", (750), Lock Washer; 3/8", (Sub For Ffsb107931), Part Missing In Wise; 3/8", (Use With R81911) Code 2501 And 2503, Part Missing In Wise; 3/8" (34 Harvester), Part Missing In Wise; (A: Contained In Ar94567) 3/8", Part Missing In Wise; (A: 5045d(00***75-), 5055d(00***19-), 5045e(00***74-), 5055e(00***75-), 5065e(00***02-), 5075e(00***21-)) 3/8", Part Missing In Wise; 3/8", For 810, Part Missing In Wise; (F: Used With Steel Moldboard) 3/8", Part Missing In Wise; 3/8", (13 Used, Rc And St) (11 Used, Ru And Or), Part Missing In Wise; 3/8", For 10' Harrow, Part Missing In Wise; (Use With 19h2284), Part Missing In Wise; 3/8", (St), Part Missing In Wise; 3/8", (Use With Ar77343), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8" (Nlr), Part Missing In Wise; 3/8" (For 19h3267), Part Missing In Wise; (A) 3/8", (No Longer Available), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8", Used With Fiber Glass Seed Hopper, Part Missing In Wise; 9.525 mm (3/8") (Use With 19h1936), Part Missing In Wise; 3/8", (Rc, Ru, Rus), Part Missing In Wise; 3/8", (Not Required With 19h1936), Part Missing In Wise; 3/8", (2 Used, Variable Drive; 4 Used, Long), Part Missing In Wise; 3/8", (Code 6205), Part Missing In Wise; (A: (-Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Part Missing In Wise; 3/8", (Not Required With E55662) (Use With 19h3219), Part Missing In Wise; 3/8", (Use With R125586), Part Missing In Wise; 3/8" (Pst), Part Missing In Wise; 3/8", Used On Beet Planter, Part Missing In Wise; (B: 24 And 224 Balers) 3/8", Part Missing In Wise; (E) 9.525 mm (3/8"), Part Missing In Wise; 3/8" (A), (B), Lock Washer; 3/8", (Use With 19h3239), Part Missing In Wise; 3/8", (Sub R44302), Part Missing In Wise; (A: (-Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Part Missing In Wise; 3/8", (Not Longer Required), Part Missing In Wise; (No Longer Required), Part Missing In Wise; 3/8", (Use With 24h1303), Part Missing In Wise; 3/8" Lh, Part Missing In Wise; 3/8", (Use With R59409), Part Missing In Wise; 9.525 mm, Part Missing In Wise; 3/8", (Sub K40003, This Application), Part Missing In Wise; 3/8", (2 Used Single) (4 Used Dual), Part Missing In Wise; 3/8" Battery Terminal (1 Used Single Battery) (2 Used Dual Battery) (Use With Ar66424), Part Missing In Wise; 3/8", (Use With A24646 Or A24647 And A24651), Part Missing In Wise; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8" (Nlr), Part Missing In Wise; 3/8" (Not Req. With E55662), Part Missing In Wise; 3/8", (Mower Bar), Part Missing In Wise; 3/8", (Cornhead Attachment), Part Missing In Wise; 3/8", (Ru, Rc), Part Missing In Wise; (Sub F16202), Part Missing In Wise; 3/8", 28-Inch Rows, Part Missing In Wise; (A: Engine Serial No.) 3/8", Part Missing In Wise; (C), Part Missing In Wise; 3/8", (Code 1701, 1702 And 1703), Part Missing In Wise; 3/8", Code 3905, Part Missing In Wise; 3/8", (Not Required With E55662), Part Missing In Wise; 3/8", (Use With Ar11116), Part Missing In Wise; 3/8" (Rg), Part Missing In Wise; 3/8" (8 Used Dual) (12 Used Triple), Part Missing In Wise; 3/8", (No Longer Required With R41041), Part Missing In Wise; (B) 3/8", Part Missing In Wise; 3/8" (Qrt), Part Missing In Wise; 3/8", (Use With R114130, 14h812 And 19h3219), Part Missing In Wise; 3/8" (Not Required), Part Missing In Wise; 3/8", (Code 2108), Part Missing In Wise; 3/8" (D), Part Missing In Wise; 3/8" (No Longer Required, This Application), Part Missing In Wise; 3/8", (Motorola), Part Missing In Wise; 3/8" (Nla), Part Missing In Wise; 5/16", Part Missing In Wise; 3/8", (No Longer Required), Part Missing In Wise; 3/8", (Code 2101, 2102, Or 2109), Part Missing In Wise; 3/8" (Fan To R100682, R100676, R90561 Or R82180) Code 2314 (Af Only), Part Missing In Wise; 3/8", (Use With 14h1076), Part Missing In Wise; 3/8", (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Use With Ar55094), Part Missing In Wise; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8", Part Missing In Wise; (A: From Sr. No. 5103s-00***91, 5203-00***82, 5104/5204/5038d-00***01.) 3/8", Part Missing In Wise; (B) 3/8", (Sub For R1870r), Part Missing In Wise; (C: Carbon Brush Conductor) 3/8", Part Missing In Wise; 3/8", For Gauge Shoe, Part Missing In Wise; 3/8", For R128566, R131753, Part Missing In Wise; 3/8", (Ea-D, Ea-G, Ha-G, De-01, Ge-01), Part Missing In Wise; (C: 5303 (-00***07), 5403 (-00***42).) 3/8", Part Missing In Wise; 3/8", (Use With 19h2676), Part Missing In Wise; 3/8", Fertilizer Opener, Part Missing In Wise; No 10, Part Missing In Wise; (A: From Sr.No. 5103s(01***67-), 5104(01***62-), 5204(00***15-)) 3/8", Part Missing In Wise; (A) (C) 3/8", Part Missing In Wise; X X X 3/8", Part Missing In Wise; 3/8", (Delco-Remy), Part Missing In Wise; (Code 1709), Part Missing In Wise; 3/8", (Use With Ar87024 Or Ar87023), Part Missing In Wise; 3/8", 4020 Or 4010 Tractor, Part Missing In Wise; (A) (B) 9.525 mm (3/8"), Part Missing In Wise; 3/8", (To Clip), Part Missing In Wise; 3/8", 2 Or 4 Used, Part Missing In Wise; 3/8", (Used With Victor Valve), Part Missing In Wise; 3/8", (Row-Crop), Part Missing In Wise; 3/8", (Use With Re19265), Part Missing In Wise; 3/8", For B27852 Only, Part Missing In Wise; 3/8" Low, Part Missing In Wise; 3/8" (A) (B), Part Missing In Wise; 3/8", (1 Used Single Selective Control) (2 Used Dual Selective Control), Part Missing In Wise; 3/8", (Use With R57425, R74124, R81234 Or R86703), Part Missing In Wise; (A), Part Missing In Wise; 3/8", (Code 7001, 7002, 7003, And 7004), Part Missing In Wise; 3/8", Code 2311(Af, Af001), Part Missing In Wise; 3/8", (4 Used, Variable Drive; 6 Used, Long), Part Missing In Wise; 3/8", External Tooth, No. 10, Part Missing In Wise; 3/8" Ar, Part Missing In Wise; 3/8", (A), (D), Part Missing In Wise; (C) 3/8", Part Missing In Wise; 3/8", Part Missing In Wise; 3/8", 8650 Tractor, Part Missing In Wise; 3/8", (31 Used, 6'; 43 Used, 8'), Part Missing In Wise; 3/8", (Use With Ar36849), Part Missing In Wise; 3/8", (Regular), Part Missing In Wise; 3/8" (Use With R191204), Part Missing In Wise; (A: Assembly Listed Below Contains All Parts Identified By (A):) 3/8" (Use With R59409), Part Missing In Wise; 3/8", (No Longer Available), Part Missing In Wise; (A: Quad-Range Transmission) 3/8", Part Missing In Wise; 3/8", (Afd - No Longer Required), Part Missing In Wise; (E) 3/8", (Use With Ar66424), Part Missing In Wise; 3/8", Code 3907, Part Missing In Wise; 3/8" 3\8", Part Missing In Wise; 3/8", (Code 4101), Part Missing In Wise; 3/8" (Not Required W/E55662 Or 14h1090), Part Missing In Wise; (D) 3/8", Part Missing In Wise; 3/8" ((1) Per Spare Shear Bolt), Part Missing In Wise; 3/8" (6620 Sidehill), Part Missing In Wise; (A) 3/8", Outer, Part Missing In Wise; 3/8", 28" Rows Only, Part Missing In Wise; 3/8", For 6-Tooth Section, Part Missing In Wise; 3/8", 4010 Or 4020 Tractor, Part Missing In Wise; 3/8", (Saran Cd), Part Missing In Wise; 3/8" (2 Used Dual) (3 Used Triple) (4 Used Quad), Part Missing In Wise; 3/8", (Sub T56055), Part Missing In Wise; (A: No Longer Required) 3/8", Part Missing In Wise; 3/8", (18 Used Steel Pan) (21 Used Cast Iron Pan), Part Missing In Wise; 3/8", (6401), Part Missing In Wise; 3/8", (Not Required), Part Missing In Wise; 3/8", (Use With Ar66424 Or At25619), Part Missing In Wise; 3/8", (Not Req W/ E55662), Part Missing In Wise; (A) (B) (D) (E) 3/8", Part Missing In Wise; 3/8", (650), Part Missing In Wise; 3/8", (K1) (K2), Part Missing In Wise; 3/8" (Use With Motorola), Part Missing In Wise; 3/8", No. 20 Hitch, Part Missing In Wise; 3/8" (Use With Standard Rasp Bars), Part Missing In Wise; 3/8", (Or, Rs, Rus, Ut), Part Missing In Wise; Internal-Tooth, No. 10, Part Missing In Wise; 3/8" (Use With Ae24403), Part Missing In Wise; X 3/8", Part Missing In Wise; 3/8" (Not Required W/ E55662), Part Missing In Wise; 3/8", (16 Used, 6'; 24 Used, 8'), Part Missing In Wise; 3/8", Code 2311 (Tf) (Pulley To Fan Spacer)4
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm4
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 86 Straw Spreader : Straw Spreader Drive [02h08]
03***28Bolt; (A) M8x20, Bolt; M8x20, Bolt, Bolt; (A) M8 X 20, Bolt; (A: Use Only For Kernel Processor Quick Conversion) M8 X 20, Bolt; 8x20mm, Bolt; M8 X 204
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm11
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 86 Straw Spreader : Straw Spreader Protection Shields [02h12]
12***08Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm8
12***12Washer; 6,100mm, Washer; 8mm, Washer, Washer; (B), Washer; 6mm, Washer; 6,4mm, Washer; 6 mm, Washer; 10 mm, Washer; 6 mm, Ar, Washer; (A) 6 mm, Washer; 5mm, Washer; 6 100mm, Washer; 6 X 11,8 X 1,6 mm, Washer; 6 mm A6, Washer; 6.100 mm, Washer; Ar, 6mm, Washer; 6 1mm, Washer; (A), Washer; M6, Washer; (A) 6mm, Washer; 6,1mm, Washer; 6 mm 6 mm, Washer; (A) (B) 6 X 11,8 X 1,6 mm, Washer; Ar, 6 mm, Washer; 7 mm, Washer; 16 mm, Washer; 7mm20
12***13Washer; 10.200 mm M10, Washer; 940, 930, 10 mm, Washer; 10.200 mm, (Sub 12m7066), Washer; (A: For 7300, 7400, 7500) 10.200 mm, Washer; 10m, Washer; 10.200 mm A10, Washer; (E) M10, (Use With Re19187), Washer; 10 mm, Washer; (A) 10mm, Washer; 10.200 mm, Washer; 10.200 mm 10 Gb93-87 Zn.D, Washer; 10mm, Washer; 10.200 mm Battery Terminal, Washer; 10.200 mm 10 mm, Washer; 12mm, Washer; M10, (Use With Re19187 Or Re42730), Washer; M10, (Use With Re19187), Washer; 3/8", Washer; 10,2 X 18,1 X 22,2 mm, Washer; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.200 mm, Washer; 10.200 mm, (Use With Re19187), Washer; (A: For Rice) 10.200 mm, Washer; M10, Washer; 10,5mm, Washer; Ar, 10mm, Washer; (B) 10 mm, Washer; (A: Rice) 10.200 mm, Washer; (A) 10.200 mm, Washer; 10,185mm, Washer; 10,2 X 18,1 X 2,2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.200 mm, Washer; (B) 10mm, Washer; 940, 10 mm, Washer, Washer; (A) ,10mm, Washer; (A) 10 mm, Washer; Ar, 10 mm, Washer; (A: No Longer Required) 10.200 mm, Washer; (A: For 7350 7450, 7550) 10.200 mm, Washer; (Sub For Cj14823), Washer; (A: For 7750) 10.200 mm7
See all parts with full part numbers in Heavy Parts AI →
87 Miscellaneous
John Deere : 940 - Combine : 87 Miscellaneous : Decalcoamias [02h21]
Z3***10Decal1
Z2***25Decal1
Z3***53Decal; (Sub For Z31953), Decal1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 87 Miscellaneous : Decalcomanias [02h19]
Z4***37Decal; (Sub For Z33714), Decal, Decal; (Sub For Z31954, Z33714)1
Z3***21Decal; Lh, Rh, Decal1
Z3***46Decal1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 87 Miscellaneous : Decalcomanias [02h23]
JD***99Decal, Decal; Front1
JD***38Sign; Rear1
Z3***08Decal1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 87 Miscellaneous : Drive Belts And Chains [02h17]
AN***83Link Chain; 13 Links, Link Chain; R.H. L=13, Link Chain; (A) Rh, Link Chain; Ar,L=13, Link Chain; Rh, Link Chain; Ar, Link Chain; Ar, L = 13, Link Chain; (A), Link Chain; (Feeder House), 19,05mm (3/4") Pitch, 13 Links, Link Chain; Rh L=13, Link Chain; Auger Drive, 19,05 mm (3/4") Pitch, 13 Links, Link Chain; L=13, Link Chain; L 13, Link Chain, Link Chain; (Auger Drive), 19,05mm (3/4") Pitch, 13 Links, Link Chain; Feeder House, 19,05 mm (3/4") Pitch, 13 Links, Link Chain; (13 Links), Link Chain; Rh, L = 13, Link Chain; L = 130
AZ***52Link Chain; L = 64, Incl Key 33, Link Chain; L=64, Link Chain; L = 641
AZ***53Link Chain; L = 52, Incl Key 33, Link Chain; L = 52, Link Chain; L=521
See all parts with full part numbers in Heavy Parts AI →
John Deere : 940 - Combine : 87 Miscellaneous : M E M O R A N D A [02h16]
John Deere : 940 - Combine : 87 Miscellaneous : M E M O R A N D A [02h25]
John Deere : 940 - Combine : 87 Miscellaneous : Tools [02h15]
31***17Tool; 19x22mm, Tool; 19 X 22, Tool; 19 X 22 mm, Tool; 19x22, Tool; 19 X 22 (Sub For Z23099), Tool; 19 X 22 mm (Sub For Z23099)1
31***23Wrench; 14 X 17, Wrench; 14 X 17 mm (Sub For Z23104), Wrench; 14x17, Wrench; 14 X 17 (Sub For Z23104), Wrench; 14 X 17 mm1
31***24Wrench; 17 X 19 mm (Sub For Z23103), Wrench; 17x19, Wrench; 17 X 19 mm, Wrench; 17 X 19, Wrench; 17 X 19 (Sub For Z23103)1
See all parts with full part numbers in Heavy Parts AI →
Parts Catalog
John Deere : 940 - Combine : Parts Catalog : Parts Catalog

Need a specific 940 - COMBINE part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the appSource or supply its parts

Post a parts request and compare supplier quotes.