John Deerebulldozer(no series)

John Deere 864 - BULLDOZER

OEM parts breakdown

Search live 864 - BULLDOZER parts Source or supply its parts

Post a parts request and compare supplier quotes.

The John Deere 864 is a Hay and Forage Round Baler covered by Technical Manual TM300119.

All 864 - BULLDOZER assemblies by section

Every catalogued assembly group for the John Deere 864 - BULLDOZER. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

11 [A16]

John Deere : 864 - Bulldozer : 11 [A16]

JD***02	Reflector; (Red Reflective Marker), Reflector; Red, Reflector; Red, (Sub For Jd5580), Reflector; (A) (Sub For Jd5580), Reflector; (Sub For Jd5902) Red; Located On Unit Panels, Reflector; 2" X 6", Red, (Sub For Ga10404 Or Jd5580), Reflector; Red - On Rear Of Both Outside Fenders, Reflector; (74 X 110 mm) Red, Reflector; (Sub For Ga10404) "Red" - For R.H. And L.H. Rear Top Of Blade A Nd Extension, Reflector; (D) Red, Reflector; 74 mm X 110 mm Red, Reflector; (B: Red; When Markers Are Not Used), Reflector; Rojo, Reflector; Red, (Sub For Ga10404 Or Jd5580), Reflector; (Sub For Ga10404 Or Jd5580), Reflector; (Sub For Ga10404) Red - For R.H. And L.H. Rear Top Of Blade And Extension, Reflector; Red; When Markers Are Not Used, Reflector; Red (3" X 4.3"), Reflector; (A) Red Reflector, Reflector; (C: ( -Xxxxxx) 14'(-13*00) 16'(-1300) 18'(-1300)) (A) (B) Red, Reflector; (Red Reflector Marker), Reflector; (Sub For Jd5580), Reflector; Red, 3" X 6", (Sub For Jd5580), Reflector; Red, Reflector; 74 mm X 110 mm (2-15/16" X 4-11/32") Red, Reflector; (Sub For Jd5580) Red, Reflector; Red, (Sub For Ga10404 And Jd5580), Reflector; (Sub For Jd5580) Reflector (Red), Reflector; (Sub For Ga10404) "Red" - Located On L.H. And R.H. Rear Top Of Blade And Extension, Reflector; (A: Red), Reflector; (Rear, R.H. And L.H. Sides) (Sub For Jd136 Or Jd5580) (74 X 110), Reflector; (A: Transport Option), Reflector; (A) Red, Reflector; Reflector, (Sub For Jd5580), Reflector; (C: Red), Reflector; (Sub For Ga10404 Or Jd5580) Rear Of Hopper, Red, Reflector; (F: When Markers Are Not Used; Red), Reflector; (Sub For Jd5580) (Red Reflector), Reflector; (Sub For Ga10404) "Red" -Located On L.H. And R.H. Top Of Blade And Extension 2.7 M (9'), 3.0 M (10'), And 3.7 M (12'), Reflector; 74 X 110 mm (Sub For Ga10404 Or Jd5580) Red, Reflector; (Red) (Sub For Jd5580), Reflector; Amber, Reflector; (Sub For Jd5580)Red, Reflector, Reflector; (Sub For Jd5580) Reflective Tape (Red), Reflector; (Sub For Ga10404) "Red" - Located On L.H. And R.H. Top Of Blade And Extension, Reflector; (A: -Xxxxxx 446(1363) 546(13**19)) Red, Reflector; Red (Sub For Jd5902), Reflector; Red Reflector, Reflector; Red, (Sub For Jd5500)	2
JD***06	Reflector; (Sub For Jd5583) Amber, Reflector; (Sub For Jd5583)Amber, Reflector; (B) (Sub For Jd5583), Reflector, Reflector; Yellow, Reflector; Amber, (Sub For Ga10405 Or Jd5583), Reflector; (B) (Sub For Jd5906), Reflector; (Sub For Ga10405) "Amber" - Located L.H. Top Of Blade And Extension; 2.7 M (9'), 3.0 M (10'), 3.7 M (12'), Reflector; Amber, (Sub For Ga10405 And Jd5583), Reflector; (Sub For Jd5583), Reflector; (D: Amber) (Sub For Jd5583), Reflector; Amber, (Sub For Ga10405 Or Jd5906), Reflector; (Sub For E55195 And Jd5583) Amber, Reflector; Amber, Rh, Reflector; (Sub For Ga10405) "Amber" - For L.H. Front Top Of Blade And Ext Ension, Reflector; Amber, (Sub For Jd5583), Reflector; Amber (3" X 4-1/3") (Sub For Jd5583), Reflector; Amber; When Markers Are Not Used, Reflector; (Amber) (Sub For Jd5583), Reflector; 74 mm X 110 mm (2-15/16" X 4-11/32") Amber, Reflector; (Sub For Jd5580)Amber, Reflector; Amber, (Sub Forjd5583), Reflector; (C: ( -Xxxxxx) 14'(-13*00) 16'(-1300) 18'(-1300)) (A) (B) Yellow, Reflector; (Sub For Ga10405) "Amber" - Located On L.H. Top Of Blade And Extension, Reflector; (C: Amber ; When Markers Are Not Used), Reflector; (Sub For Jd5583) Amber; Located On Unit Panels, Reflector; Amber (3" X 4-5/16") (Sub For Jd5583), Reflector; Amber, Reflector; 2" X 6", Amber, (Sub For Ga10405 Or Jd5583), Reflector; Yellow, Reflector; (A: -Xxxxxx 446(1363) 546(13**19)) Yellow, Reflector; (Sub For Jd5583) Yellow, Reflector; (Sub For Ga10405) Amber - For L.H. Front Top Of Blade And Extension, Reflector; Amber (Sub For Jd5906), Reflector; (Sub For Ga10405 Or Jd5583), Reflector; (C: Yellow Reflector; Located On Cart Frame Above Caster Wheel), Reflector; (D: Yellow), Reflector; (Sub For Ga10405) "Amber" - Located On L.H. Front Top Of Blade And Extension, Reflector; (D: Amber), Reflector; Yellow, (Sub For Jd5583), Reflector; Yellow Reflector; Located On Cart Frame Above Caster Wheel, Reflector; 74 X 110 mm, (Sub For Ga10405 Or Jd5583) Yellow, Reflector; (A) Yellow	1
JD***37	Label; "John Deere", Label; "Leaping Deer" 60 mm (2-3/8") - Located On Rear Of Frame Centered Below Mast Plates, Label; "John Deere" Located Rear Top Center Of Blade, Label; "John Deere" - For Rear Top Center Of Blade, Label; "John Deere" On Rear Top Center Of Blade, Label; John Deere 60 X 616.8 mm, Label, Label; "John Deere" 60 mm (2-3/8") On Back Side Of Tank, Label; (60 mm X 616.8 mm), Label; "John Deere" 60 mm (2-3/8") On Front Edge Of Channels, Label; (Sub For Jd5507), Label; "John Deere" 60 mm X 616 mm, Label; "John Deere" - Located On Each Side Of Tank, Label; "John Deere" Located On Rear Top Of Blade, Label; "John Deere" For Rear Top Center Of Blade, Label; "John Deere" - Located On L.H. Side Of Frame, Label; "John Deere" 60 mm (2-3/8") Located On Rear Of Main Frame Cylinder., Label; (A) 'John Deere' On Main Frame, Label; "John Deere" 60 mm (2-3/8") - Located On On Outside Of Each Narrow Wing And On Outside Of Each Wing Wing, Label; "John Deere" - Located On Rear Of Frame Below Mast, Label; "John Deere" 60 mm (2-3/8"), Label; "John Deere" - Located On R.H. Rear Of Frame, Label; "Caution" - Located On Auger Fill Hopper, Label; (A) "John Deere" 60 mm (2-3/8")	1
JD***90	Label; "Leaping Deer", Label; (A) (Sub For Jd5518) "Leaping Deer" - On Front Of Frame, Label, Label; 226 X 198 mm, Label; (A) Leaping Deer, 203 mm (8"), Label; "Leaping Deer" - Located On Center Rear Of Bucket, Label; (For Dc50158), Label; (For Dc50151) 226 X 198 mm, Label; "Leaping Deer" - Located Top Of Front Drive Shield, Label; "Leaping Deer" - Located On Front Center Of Blade, Label; Leaping Deer, Label; (312), Label; (D) "Leaping Deer", Label; (Sub For Jd5237) "Leaping Deer" - Located On Front Drive Shield, Label; 198x228,6 mm, Label; (Leaping Deer), Label; (Sub For Jd5237) ("Leaping Deer") (229 mm) (9" Wide) (For L.H. Side Of Fan Housing), Label; (For Dc50154, Dc50157) 226 X 198 mm, Label; "Leaping Deer"- For Front Center Of Blade, Label; "Leaping Deere"	1

See all parts with full part numbers in Heavy Parts AI →

A-Frame And Pivot Frame [A06]

John Deere : 864 - Bulldozer : A-Frame And Pivot Frame [A06]

12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	2
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	2
14***05	Nut; 1" 1", Unc, Nut; 1", Nut	4

See all parts with full part numbers in Heavy Parts AI →

Blade Extension [A15]

John Deere : 864 - Bulldozer : Blade Extension [A15]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	5
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	5
19***58	Cap Screw; 3/4" X 2" (Hs, Sae 8) (Front Top), Cap Screw; 3/4" X 2" Initially Torque Bolts To 50 Lb-Ft (68 N-M) - Cycle Cylinders And Swivel Mast Through 2 Or More Full Cycles To Establish Alighment- Retorque Bolts To 280 Lb-Ft (381 N-M)- Retorque Periodically, Cap Screw; 3/4" X 2" (Hs, Sae 8) Front Top, Cap Screw; (F) 3/4" X 2" (12-1/2') Bottom, Cap Screw; 3/4" X 2" (9, 11 And 13 Std), Cap Screw; 19.050 X 50.800 mm, Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) 3/4" X 2", Cap Screw; (F) 3/4" X 2" (17-1/2'), Cap Screw; 3/4" X 2" Hs, Sae 8, Cap Screw; 3/4" X 2", (Hs-Sae 8), Cap Screw, Cap Screw; 3/4" X 2", (Use With At79706 Rim), Cap Screw; 3/4" X 2", Hs Sae 8, Cap Screw; 3/4" X 2" Top, Cap Screw, Cap Screw; 3/4" X 2" (A), Cap Screw; 3/4" X 2" (Hs, Sae 8), Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) 3/4" X 2", Cap Screw; 3/4" X 2" (A)(C), Cap Screw; 3/4" X 2", Cap Screw; 3/4" X 2" (Hs, Sae 8) Rear Bottom, Cap Screw; 3/4" X 2" Front Top, Cap Screw; 3/4" X 2", Cap Screw; 3/4" X 2" (Hs-Sae 8), Cap Screw; 3/4" X 2", Hs Sae 8, Plated, Cap Screw; 3/4" X 2" (D), Cap Screw; 3/4" X 2", Top	5
GL***22	Extension; 305 mm (1'), Extension; (A) 305 mm (1')	1

See all parts with full part numbers in Heavy Parts AI →

Blade Side Plates [A17]

John Deere : 864 - Bulldozer : Blade Side Plates [A17]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	10
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	10
19***58	Cap Screw; 3/4" X 2" (Hs, Sae 8) (Front Top), Cap Screw; 3/4" X 2" Initially Torque Bolts To 50 Lb-Ft (68 N-M) - Cycle Cylinders And Swivel Mast Through 2 Or More Full Cycles To Establish Alighment- Retorque Bolts To 280 Lb-Ft (381 N-M)- Retorque Periodically, Cap Screw; 3/4" X 2" (Hs, Sae 8) Front Top, Cap Screw; (F) 3/4" X 2" (12-1/2') Bottom, Cap Screw; 3/4" X 2" (9, 11 And 13 Std), Cap Screw; 19.050 X 50.800 mm, Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) 3/4" X 2", Cap Screw; (F) 3/4" X 2" (17-1/2'), Cap Screw; 3/4" X 2" Hs, Sae 8, Cap Screw; 3/4" X 2", (Hs-Sae 8), Cap Screw, Cap Screw; 3/4" X 2", (Use With At79706 Rim), Cap Screw; 3/4" X 2", Hs Sae 8, Cap Screw; 3/4" X 2" Top, Cap Screw, Cap Screw; 3/4" X 2" (A), Cap Screw; 3/4" X 2" (Hs, Sae 8), Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) 3/4" X 2", Cap Screw; 3/4" X 2" (A)(C), Cap Screw; 3/4" X 2", Cap Screw; 3/4" X 2" (Hs, Sae 8) Rear Bottom, Cap Screw; 3/4" X 2" Front Top, Cap Screw; 3/4" X 2", Cap Screw; 3/4" X 2" (Hs-Sae 8), Cap Screw; 3/4" X 2", Hs Sae 8, Plated, Cap Screw; 3/4" X 2" (D), Cap Screw; 3/4" X 2", Top	10
GL***38	Plate; (A) (Illustrated), Plate; (A) L.H. (Illustrated)	1

See all parts with full part numbers in Heavy Parts AI →

Blade, Cutting Edge And Skid Shoes [A07]

John Deere : 864 - Bulldozer : Blade, Cutting Edge And Skid Shoes [A07]

10***82	Bolt; (D) 5/8" X 2-3/4", Bolt; 5/8" X 2-3/4", Bolt; 5/8"X2-3/4",Low, Bolt; Low, Bolt; 5/8"X2-3/4", Bolt; 5/8" X 2-3/4", (For 3.7 M (12') Blade Only), Bolt; (A) 5/8" X 2-3/4", Bolt; 5/8"X2-3/4" Low, Bolt; 5/8"X2-1/2", Bolt; 5/8" X 2-3/4" (A), Bolt; 15.875 X 69.850 mm (5/8" X 2-3/4")	16
11***30	Cotter Pin; (A: 24r20) (B: 31/32r15) 5 X 40 mm, Cotter Pin; (A: Main Frame) (B: Wing Frame) 5 X 40 mm, Cotter Pin; 0.197" X 1.575", Cotter Pin; (A: 5303 (-00*13), 5403 (-0075)) 5 X 40 mm, Cotter Pin; (Sub For Pt19056), Cotter Pin; 5x40mm (Sub For L36469), Cotter Pin; (A: 9550 (6901-) 9550sh (6901-)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (0.197" X 1.575"), Cotter Pin; 5x40mm, Cotter Pin; (A) 5 X 40 mm, Cotter Pin; 5 X 40 mm, (Sub 11m7073), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 5 X 40 mm, (Use With N60865), Cotter Pin; 5 X 40 mm (For Ah219841), Cotter Pin; 5 X 55 mm (Sub For 11m1405), Cotter Pin; (Sub For 11h218), Cotter Pin; 5 X 40 mm (912), Cotter Pin; (A) 5x40mm, Cotter Pin; (B) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, Cotter Pin; 5 X 40mm, Cotter Pin; (B: Part Of Ar109180 Adjustable Front Axle) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For Pt19056), Cotter Pin; 5 X 40 mm, (Sub For 11h218), Cotter Pin; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m1405), Cotter Pin, Cotter Pin; M5 X 40 Zn, Cotter Pin; 5/32"X1-1/2", Cotter Pin; (B: 12.5 Foot) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m7073, This Application), Cotter Pin; 5 X 45 mm, Cotter Pin; (A: Syncshuttle Transmission - 5420: Sn 4460-, 5520: Sn 45*01-) 5 X 40 mm, Cotter Pin; (A) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, (Sub For Mg87398), Cotter Pin; (B) 5x40mm, Cotter Pin; 5 X 40 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5x45mm	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	16
GL***06	Cutting Edge; (C), Cutting Edge, Cutting Edge; 1.8 M (6') Two Used On 3.7 M (12') Blade, Cutting Edge; (B) (Sub For Glb116206) 1.8 M (6'), Cutting Edge; 6 Ft (1.8 M), Cutting Edge; 1.8 M (6')- For 3.7 M (12') Blade, Cutting Edge; (A) (Sub For Glb116106)	2

See all parts with full part numbers in Heavy Parts AI →

Brush Rack [A13]

John Deere : 864 - Bulldozer : Brush Rack [A13]

12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	2
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	8
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	8
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	2

See all parts with full part numbers in Heavy Parts AI →

Hydraulics ( -1983) [A08]

John Deere : 864 - Bulldozer : Hydraulics ( -1983) [A08]

AP***54	Adapter; 3/8" X 3/8", 90°, Adapter; 3/8" Npt X 90°, Adapter; 90°, Adapter, Adapter; (B), Adapter; (Gresen) (1250 Psi), Adapter; 3/8", 90°, Adapter; 3/8" Nptm X 3/8" Nptf X 90°	4
AP***50	Adapter Fitting; (A), Adapter Fitting; 3/8" X 3/8" Straight	4
AU***69	Adapter; (B), Adapter; 3/4" X 3/8", Straight, Adapter; 45°, Adapter, Adapter; 3/4" O-Ring Male X 3/8" Npt Female Swivel, (Use With Aw30065)	2
GL***09	Clamp; 3/32" X 5/16" X 13-3/8", Clamp	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulics (1983- ) (Serial No. -012000) [A09]

John Deere : 864 - Bulldozer : Hydraulics (1983- ) (Serial No. -012000) [A09]

AN***56	Elbow Fitting; (Sub For At47759), Elbow Fitting; (A) (Use With Aw15577) (Sub For Au13611), Elbow Fitting, Elbow Fitting; 90°, Elbow Fitting; 10 mm X 2 435 mm (3/8" X 96"), Elbow Fitting; (Sub For Au13611), Elbow Fitting; 90°, (Sub For Au13611), Elbow Fitting; (B), Elbow Fitting; (Not Used This Application), Elbow Fitting; (A) (Sub For Au13611), Elbow Fitting; 90° (3/4" Male O-Ring To 3/8" Female Pipe) (Sub For At47759)	2
AP***54	Adapter; 3/8" X 3/8", 90°, Adapter; 3/8" Npt X 90°, Adapter; 90°, Adapter, Adapter; (B), Adapter; (Gresen) (1250 Psi), Adapter; 3/8", 90°, Adapter; 3/8" Nptm X 3/8" Nptf X 90°	2
AP***50	Adapter Fitting; (A), Adapter Fitting; 3/8" X 3/8" Straight	2
AU***69	Adapter; (B), Adapter; 3/4" X 3/8", Straight, Adapter; 45°, Adapter, Adapter; 3/4" O-Ring Male X 3/8" Npt Female Swivel, (Use With Aw30065)	4

See all parts with full part numbers in Heavy Parts AI →

Hydraulics (1983- ) (Serial No. 012001- ) [A10]

John Deere : 864 - Bulldozer : Hydraulics (1983- ) (Serial No. 012001- ) [A10]

AT***32	Elbow Fitting; (Std), Elbow Fitting; 90° Adjustable, Elbow Fitting; (W/ Hydraulic Wing Control), Elbow Fitting; 90°, (Double And Single Acting Cylinders), Elbow Fitting; 90 Degree Adjustable, Elbow Fitting; (Incl R26375), Elbow Fitting; (Sub For Ar26763) Adjustable, 90°, Elbow Fitting; (Sub For At35120, This Application), Elbow Fitting; 37 Degree, Elbow Fitting; 90° (Sub For Ar26763) (For 4640 And 4840 Tractors), Elbow Fitting; (Includes R26375) 90°, Elbow Fitting; (Sub For Ar26763) 90°, Adjustable, Elbow Fitting; (Sub For Ar26763), Elbow Fitting; (B) (Sub For Ar26763), Elbow Fitting; (A: 7.5/15" Dual Spacing), Elbow Fitting; 3/4", Elbow Fitting; Includes (5) R26375, Elbow Fitting; 90 Degree Adjustable, (For 4640 And 4650 Tractors), Elbow Fitting; 90°, (Sub For Ar26763), Elbow Fitting; 90° (Sub For Ar26763), Elbow Fitting; 90° (Illustrated), Elbow Fitting; (A) (Includes R26375), Elbow Fitting; 90° (Use With Down Stop) (Sub For Ar26763), Elbow Fitting; (B: 8000 & 9000 Series Tractors), Elbow Fitting; Lh, Elbow Fitting; (3/4" Male Jic X 3/4" Male O-Ring) (Includes R26375), Elbow Fitting; (Sub For Ar26763) 90° Adjustable, Elbow Fitting; Connector O-Ring (3/4" X 3/4" Thrd Size), Elbow Fitting; Sub For Ar26763, Elbow Fitting; 90° With O-Ring, Elbow Fitting; (A), Elbow Fitting; L.H., Elbow Fitting; Rh (Sub For Ar26763), Elbow Fitting; M8, Elbow Fitting; 90° (Incl (1) R26375), Elbow Fitting; Short Neck, Elbow Fitting; (2 Used, A) (4 Used, B) (Sub For Ar26763), Elbow Fitting; Adjustable, 90 Degree (For 4640 And 4650 Tractors), Elbow Fitting; (Use With Ar93819) (Incl R26375), Elbow Fitting; 3/4" Male O-Ring X 3/4" Male Jic, (Includes R26375), Elbow Fitting; (2 Used Single Selective Control) (4 Used Dual Selective Control), Elbow Fitting; Adjustable, 90°, Elbow Fitting; 7.5/15" Dual Spacing, Elbow Fitting; 90 Deg. (Includes O-Ring) (Sub For Mg128830), Elbow Fitting; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.), Elbow Fitting; 90° - With O-Ring, Elbow Fitting; 90°, Adjustable (For 4640 And 4840 Tractors) (Sub For Ar26763), Elbow Fitting; 37° Flare O-Ring, Elbow Fitting; Single Acting Valve Sections, Elbow Fitting; 90 Degree Elbow, Elbow Fitting; (Includes O-Ring R26375), Elbow Fitting; (B: With Hydraulic Wing Control), Elbow Fitting; (For Ar103522, Az37511) (Sub For Ar26763), Elbow Fitting; (Includes R26375), Elbow Fitting; (A) (Sub For Ar26763), Elbow Fitting; (A: For 4640, 4840 And 4850 Tractors.), Elbow Fitting; 90°, Adjustable, Elbow Fitting; (A) 90°, (Sub For Ar26763), Elbow Fitting; (Sub Ar26763), Elbow Fitting; (With Conveyor), Elbow Fitting; (For Az37511), Elbow Fitting; 3/4", 90° - With O-Ring, Elbow Fitting; 7std30 And 9std24, Elbow Fitting; (Use With Aa37015 And Aa37019 Hoses), Elbow Fitting; No. 1 Cylinder, Elbow Fitting; 90 Degrees, Elbow Fitting; 90 Degress, Elbow Fitting; (90 Degree) (Incl One O-Ring), Elbow Fitting; 90°, Elbow Fitting; (A: Tractor Remote Cylinder Control Valve Operated Grapple) (Incl R26375), Elbow Fitting; (A: Grapple Operated With Tractor Remote Cylinder Control Valve.) (Incl R26375), Elbow Fitting; (C) 90°, (Sub For Ar26763), Elbow Fitting; (Sub For Ar26763)90°, Elbow Fitting; (B), Elbow Fitting; (A: Tractors With Enclosures.) (Incl R26375), Elbow Fitting; 90 °, Elbow Fitting; (Sub For Ar26763) (2 Used Single Selective Control) (4 Used Dual Selective Control), Elbow Fitting; For Bucket Dump Angle Improvement, Elbow Fitting; (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)), Elbow Fitting, Elbow Fitting; 3/4" X 3/4", Elbow Fitting; (Sub For An31756), Elbow Fitting; 90° (Single Acting Cylinders), Elbow Fitting; (For Ar103522, Az37511), Elbow Fitting; (Sub For Ar26763 And Gg230-18574), Elbow Fitting; (Short Neck), Elbow Fitting; (C), Elbow Fitting; (B: For Grapple Operated With Loader Control Valve) (Incl R26375), Elbow Fitting; Elbow, Adj, 90° (Illustrated) (Use With Single 4 X 32 Cylinder), Elbow Fitting; (Use With An260192), Elbow Fitting; (Dual Selective Control Valves) (Sub For Ar26763), Elbow Fitting; (Short Neck) (Includes R26375), Elbow Fitting; (Use With Ar93819) (Includes R26375), Elbow Fitting; 90 Degree, Elbow Fitting; (Includes O-Ringr26375), Elbow Fitting; (90 Degree) (Includes O-Ring), Elbow Fitting; (1 Used On Rod End) (2 Used On Base End) (Sub For Ar26763), Elbow Fitting; 90 Degree Adjustable (For 4640 And 4650 Tractors), Elbow Fitting; (A: Install In 1 Select. Control Valve), Elbow Fitting; 90°, Adjustable, (Sub For Ar26763), Elbow Fitting; 90° 3/4" Male O-Ring X 3/4" Male Jic, (Includes R26375), Elbow Fitting; Adjustable, 90 Degree, Elbow Fitting; (Sub For Ar26763) (Includes R26375), Elbow Fitting; 90° 3/4" Jic Male X 3/4" Male O-Ring (Incl (1) R26375), Elbow Fitting; (Sub For Mg128830), Elbow Fitting; 36' And 44', Elbow Fitting; 90 Deg, Elbow Fitting; (Sub For Ar26763) 90°, Elbow Fitting; Elbow, Adj, 90° (Illustrated) (Use With Single 4 X 32 Cylinder) (Sub For Ar26763), Elbow Fitting; (Includes (1) O-Ring) 90 Degree, (Sub For Mg128830), Elbow Fitting; (B) (Includes R26375), Elbow Fitting; Adjustable 90°, Elbow Fitting; Includes R26375, Elbow Fitting; 90°, (Includes R26375), Elbow Fitting; (Includes R26375) Short Neck, Elbow Fitting; 90 Degree (Includes O-Ring) (Sub For Mg128830), Elbow Fitting; (D), Elbow Fitting	4
AT***18	Hydraulic Hose, Hydraulic Hose; 3/4" X 927 mm X 3/4", Hydraulic Hose; 3/4" X 36-1/2" X 3/4", Hydraulic Hose; 3/4" X 927 mm (36-1/2") X 3/4", 8-Row Wide, Hydraulic Hose; 3/4" X 927 mm (36-1/2") X 3/4"	2
GL***82	Hose; 1/2" X 216"	2
GL***48	Hose; 3/8" X 50, Hose, Hose; 3/8" X 50"	2

See all parts with full part numbers in Heavy Parts AI →

Lift Cylinder (Cross) (2-1/2" X 16") ( -1983) [A11]

John Deere : 864 - Bulldozer : Lift Cylinder (Cross) (2-1/2" X 16") ( -1983) [A11]

14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	1
19***65	Cap Screw; (A) 3/8"X3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4") Longitud=95.5mm (3.76") Frente=M10, Cap Screw; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8" X 1-3/4", Cap Screw; (A: Quad-Range Transmission) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Sub For H2783b), Cap Screw; 3/8" X 1-3/4", (2 Used Single) (4 Used Dual), Cap Screw; 3/8" X 1-3/4" (Use With O.And S.), Cap Screw; (A: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Rear Hitch Option), Cap Screw; 3/8" X 1-3/4", (Na-G, Na-L), Cap Screw; (B) 3/8"X1-3/4", Cap Screw; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Chrysler No. 17*45), Cap Screw, Cap Screw; (A) (C) 3/8" X 1-3/4", (Use With Ar45483), Cap Screw; (K) 3/8" X 1-3/4", Cap Screw; (B: Hi-Crop) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", For 5 Section, Cap Screw; 3/8" X 1-3/4", (Ea-G, Ge-01), Cap Screw; 3/8" X 1-3/4", (Ea-G, Hb-G, Ge-01, Gh-01), Cap Screw; 3/8" X 1-3/4", (Illustrated), Cap Screw; 3/8" X 1-3/4", Code 2309 And 2310, Cap Screw; 3/8" X 1-3/4" (Use With C11812 And K36707), Cap Screw; 3/8" X 1-3/4", (100 Per Package) (Sub For Mg88428), Cap Screw; (C: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (4010 And 4320), Cap Screw; 3/8" X 1-3/4", (Use With 12h304 And 14h1076), Cap Screw; 3/8" X 1-3/4", (Use With R58717), Cap Screw; 3/8" X 1-3/4" (Use With Ae24403), Cap Screw; 3/8" X 1-3/4", (Beet, Bean And Vegetable), Bolt, Cap Screw; 3/8" X 1-3/4", (Na-D), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (2 Used, A) (1 Used, B), Cap Screw; 3/8" X 1-3/4", For 915, Cap Screw; 3/8" X 1-3/4", For Spike-Tooth Sections, Cap Screw; 3/8"X1-3/4", Cap Screw; (B: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4", Cap Screw; 3/8"X1-3/8", Cap Screw; (A: ( -Xxxxxx) 7710-0027; 7810-00*92) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Sae 8), Cap Screw; 2/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4" (Use With Bp12233), Cap Screw; 3/8" X 1-3/4", (2 Used Syncro-Range) (1 Used Power Shift), Cap Screw; (B), Cap Screw; 3/8" X 1-3/4", (Sub (2) 24h1309), Cap Screw; 3/8" X 1-3/4", Low, Cap Screw; (A: 2 Used Dual, 2 Used Triple) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With 14h812), Cap Screw; 3/8" X 1-3/4" (Use With 14h812), (Adjustable Rear Axle), Cap Screw; (A) 3/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Code 6401), Cap Screw; 3/8" X 1-3/4", (For An152412 Shield), Cap Screw; (A) (C) 3/8" X 1-3/4", (Fuel), Cap Screw; 3/8" X 1-3/4", (Notch Filler-Each Side), Cap Screw; 3/8" X 1-3/4" (With Dial-A-Matic), Cap Screw; 3/8" X 1-3/4", (Power Shift), Cap Screw; 3/8" X 1-3/4", Code 2306 And 2307, Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4"), Cap Screw; 3/8" X 3/4", Cap Screw; (A) 3/8" X 1-3/4", Cap Screw; (A: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (D) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Cap Screw; 3/8" X 1-3/4" (Hi-Crop), Cap Screw; 3/8" X 1-3/4" 3/8 Unc-2a X 1 3/4 A17d Zn, Cap Screw; 3/8" X 1-3/4" (Without Dial-A-Matic), Cap Screw; 3/8" X 1-3/4" (100 Per Package) (Sub For Mg88428), Cap Screw; (B) 3/8" X 1-3/4", (Sub For T16517), Cap Screw; 3/8" X 1-3/4", (Sae 8), Cap Screw; (A), Cap Screw; 3/8" X 1-3/4", (Less Rockshaft), Cap Screw; 3/8"X1", Cap Screw; 3/8" X 1-3/4" (Differential Lock), Cap Screw; 3/8" X 1-3/4", Use When Hitch Is Lowered, Cap Screw; 3/8" X 1", Cap Screw; 3/8" X 1-3/4", (675) 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4" (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4", (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 5440 Model Only, Cap Screw; 3/8"X1-1/4" (Sub For 19h246), Cap Screw; 3/8" X 1-3/4", (K1) (K2), Cap Screw; 3/8" X 1-3/4", R.H., Cap Screw; 3/8" X 1-3/4", For 4 Section, Cap Screw; 3/8" X 1-3/4" (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8) (Sub For 19h3217, This Application), Cap Screw; 3/8" X 1-3/4", (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Use With 12h304), Cap Screw; 3/8" X 1-3/4", (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8), (Sub For 19h3217, This Application), Cap Screw; (A) (C) 3/8"X1-3/4", Cap Screw; 3/8"-16 Unc X1-3/4", Cap Screw; 3/8" X 1-3/4" Rh, Cap Screw; 3/8" X 1-3/4", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8"-16 Nc X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4" 1524-2235mm (60"-88"), Cap Screw; 9.525 X 44.450 mm, Cap Screw; 3/8" X 1-3/4", (Sub 19h3217), Cap Screw; 3/8" X 1-3/4", (Sub For Ty7101), Cap Screw; 3/8" X 1-3/4", (2 Used Single Selective Control) (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4", (3020), Cap Screw; 3/8" X 1-3/4", (3020e), Cap Screw; 3/8" X 1-3/4", (Sub For Hmx03276), Cap Screw; 3/8"X3/4", Cap Screw; (A: Germany) 3/8" X 1-3/4"	1
22***97	Set Screw; 1/4" X 1/4" (Sub For Mg529034), Set Screw; (Sub For Mg529034), Set Screw; 1/4" X 1/4", (3 Used, 12, 15, And 18 Ft. With Conditioner) (4 Used, 18 Ft. Without Conditioner And Twin Swath) (6 Used, 21 And 25 Ft.), Set Screw, Set Screw; 1/4" X 1/4", Set Screw; 1/4" X 1/4" Rh, Set Screw; 1/4" X 1/4" (Sub For 22h898), Set Screw; 1/4" X 1/4", (3 Used On 660, 4 Used On 680), Set Screw; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 1/4" X 1/4", Set Screw; (C) 1/4" X 1/4"	1
2***6	Cotter Pin; (Used With 40, 420 And 430 Special And Tricycle Tractors, Fordson Major And Similar Tractors), Cotter Pin; Spring Locking, Cotter Pin, Cotter Pin; (714a, 716a), Cotter Pin; For 600 And 610, Cotter Pin; (400), Cotter Pin; (600, 610), Cotter Pin; For 400, Cotter Pin; For 810, Cotter Pin; 1194 mm (47") (Sub For Mg37851), Cotter Pin; (Sub For Q23896), Cotter Pin; (C), Cotter Pin; (With Rear Unload), Cotter Pin; (Sub For S2955dw, This Application), Cotter Pin; (Use With Aw10999), Cotter Pin; Use With Steel Fingers, Cotter Pin; For 610, Cotter Pin; (Use With Gr28663), Cotter Pin; (Holds Wrench On Frame), Cotter Pin; (4 Used-Long Feeder House; 2 Used-Regular Feeder House) (Sub H95042), Cotter Pin; Outer, Cotter Pin; (Sub H95042), Cotter Pin; (Used With 430, 420, And 40 Special And Tricycle Tractors, Fordson Major And Similar Tractors), Cotter Pin; (810)	3

See all parts with full part numbers in Heavy Parts AI →

Lift Cylinder (Degelman) (2-1/2" X 16") (1983- ) [A12]

John Deere : 864 - Bulldozer : Lift Cylinder (Degelman) (2-1/2" X 16") (1983- ) [A12]

14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	1
14***10	Nut; 7/8", Unf, Nut; 7/8", Jam, Nut; 7/8", Nut; 7/8" (Sub For F79117g5), Nut; 7/8", Nut; 7/8", Unf, Jam	1
19***65	Cap Screw; (A) 3/8"X3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4") Longitud=95.5mm (3.76") Frente=M10, Cap Screw; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8" X 1-3/4", Cap Screw; (A: Quad-Range Transmission) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Sub For H2783b), Cap Screw; 3/8" X 1-3/4", (2 Used Single) (4 Used Dual), Cap Screw; 3/8" X 1-3/4" (Use With O.And S.), Cap Screw; (A: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Rear Hitch Option), Cap Screw; 3/8" X 1-3/4", (Na-G, Na-L), Cap Screw; (B) 3/8"X1-3/4", Cap Screw; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (Chrysler No. 17*45), Cap Screw, Cap Screw; (A) (C) 3/8" X 1-3/4", (Use With Ar45483), Cap Screw; (K) 3/8" X 1-3/4", Cap Screw; (B: Hi-Crop) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", For 5 Section, Cap Screw; 3/8" X 1-3/4", (Ea-G, Ge-01), Cap Screw; 3/8" X 1-3/4", (Ea-G, Hb-G, Ge-01, Gh-01), Cap Screw; 3/8" X 1-3/4", (Illustrated), Cap Screw; 3/8" X 1-3/4", Code 2309 And 2310, Cap Screw; 3/8" X 1-3/4" (Use With C11812 And K36707), Cap Screw; 3/8" X 1-3/4", (100 Per Package) (Sub For Mg88428), Cap Screw; (C: 3 Used Triple, 4 Used Quad) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (4010 And 4320), Cap Screw; 3/8" X 1-3/4", (Use With 12h304 And 14h1076), Cap Screw; 3/8" X 1-3/4", (Use With R58717), Cap Screw; 3/8" X 1-3/4" (Use With Ae24403), Cap Screw; 3/8" X 1-3/4", (Beet, Bean And Vegetable), Bolt, Cap Screw; 3/8" X 1-3/4", (Na-D), Cap Screw; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4", (2 Used, A) (1 Used, B), Cap Screw; 3/8" X 1-3/4", For 915, Cap Screw; 3/8" X 1-3/4", For Spike-Tooth Sections, Cap Screw; 3/8"X1-3/4", Cap Screw; (B: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4", Cap Screw; 3/8"X1-3/8", Cap Screw; (A: ( -Xxxxxx) 7710-0027; 7810-00*92) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Sae 8), Cap Screw; 2/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4" (Use With Bp12233), Cap Screw; 3/8" X 1-3/4", (2 Used Syncro-Range) (1 Used Power Shift), Cap Screw; (B), Cap Screw; 3/8" X 1-3/4", (Sub (2) 24h1309), Cap Screw; 3/8" X 1-3/4", Low, Cap Screw; (A: 2 Used Dual, 2 Used Triple) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (Use With 14h812), Cap Screw; 3/8" X 1-3/4" (Use With 14h812), (Adjustable Rear Axle), Cap Screw; (A) 3/8"X1-3/4", Cap Screw; 3/8" X 1-3/4", (Code 6401), Cap Screw; 3/8" X 1-3/4", (For An152412 Shield), Cap Screw; (A) (C) 3/8" X 1-3/4", (Fuel), Cap Screw; 3/8" X 1-3/4", (Notch Filler-Each Side), Cap Screw; 3/8" X 1-3/4" (With Dial-A-Matic), Cap Screw; 3/8" X 1-3/4", (Power Shift), Cap Screw; 3/8" X 1-3/4", Code 2306 And 2307, Cap Screw; 9.525 X 44.450 mm (3/8" X 1-3/4"), Cap Screw; 3/8" X 3/4", Cap Screw; (A) 3/8" X 1-3/4", Cap Screw; (A: Less Rockshaft) 3/8" X 1-3/4", Cap Screw; (D) 3/8" X 1-3/4", Cap Screw; 3/8" X 1-3/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Cap Screw; 3/8" X 1-3/4" (Hi-Crop), Cap Screw; 3/8" X 1-3/4" 3/8 Unc-2a X 1 3/4 A17d Zn, Cap Screw; 3/8" X 1-3/4" (Without Dial-A-Matic), Cap Screw; 3/8" X 1-3/4" (100 Per Package) (Sub For Mg88428), Cap Screw; (B) 3/8" X 1-3/4", (Sub For T16517), Cap Screw; 3/8" X 1-3/4", (Sae 8), Cap Screw; (A), Cap Screw; 3/8" X 1-3/4", (Less Rockshaft), Cap Screw; 3/8"X1", Cap Screw; 3/8" X 1-3/4" (Differential Lock), Cap Screw; 3/8" X 1-3/4", Use When Hitch Is Lowered, Cap Screw; 3/8" X 1", Cap Screw; 3/8" X 1-3/4", (675) 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4" (Adjustable Rear Axle), Cap Screw; 3/8" X 1-3/4", (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 5440 Model Only, Cap Screw; 3/8"X1-1/4" (Sub For 19h246), Cap Screw; 3/8" X 1-3/4", (K1) (K2), Cap Screw; 3/8" X 1-3/4", R.H., Cap Screw; 3/8" X 1-3/4", For 4 Section, Cap Screw; 3/8" X 1-3/4" (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8) (Sub For 19h3217, This Application), Cap Screw; 3/8" X 1-3/4", (Use With C11812), Cap Screw; 3/8" X 1-3/4" (Use With 12h304), Cap Screw; 3/8" X 1-3/4", (Use With N164596), Cap Screw; 3/8" X 1-3/4" (Sae 8), (Sub For 19h3217, This Application), Cap Screw; (A) (C) 3/8"X1-3/4", Cap Screw; 3/8"-16 Unc X1-3/4", Cap Screw; 3/8" X 1-3/4" Rh, Cap Screw; 3/8" X 1-3/4", Code 6498 (Af), 6499 (Tf), Or 2803, Cap Screw; 3/8"-16 Nc X 1-3/4", Cap Screw; (B) 3/8" X 1-3/4" 1524-2235mm (60"-88"), Cap Screw; 9.525 X 44.450 mm, Cap Screw; 3/8" X 1-3/4", (Sub 19h3217), Cap Screw; 3/8" X 1-3/4", (Sub For Ty7101), Cap Screw; 3/8" X 1-3/4", (2 Used Single Selective Control) (4 Used Dual Selective Control), Cap Screw; 3/8" X 1-3/4", 100 Per Package, (Sub For Mg88428), Cap Screw; 3/8" X 1-3/4", (3020), Cap Screw; 3/8" X 1-3/4", (3020e), Cap Screw; 3/8" X 1-3/4", (Sub For Hmx03276), Cap Screw; 3/8"X3/4", Cap Screw; (A: Germany) 3/8" X 1-3/4"	1
GL***75	Seal Kit	1

See all parts with full part numbers in Heavy Parts AI →

Mounting Frames [A05]

John Deere : 864 - Bulldozer : Mounting Frames [A05]

14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	4
19***28	Cap Screw; 3/4" X 3", Cap Screw; 3/4" X 3", (Hs, Sae 8), Cap Screw; 3/4" X 3" (3/4" Bolt Holes), Cap Screw; 3/4" X 3", (Use With Re240723), Cap Screw; (X) 3/4" X 3", Cap Screw; 3/4" X 3" Hs 8 Sae, Cap Screw; (B: (Xxxxxx- ) Serial No. 8450-00*63; 8650-0078) (E: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4"X3", Cap Screw; 3/4" X 3", Caution, Cap Screw; 3/4" X 3" (5 X 7 Frame) (Safety Trip), Cap Screw; 3/4" X 3" On Chain Piler Outer Lugs, Cap Screw; 3/4" X 3", (Hs Sae 8), Cap Screw; 3/4" X 3" Hs=10.9, Sae 8, Cap Screw; 19.050 X 76.200 mm, Cap Screw; 3/4" X 3" (Safety Trip), Cap Screw; 3/4" X 3", Hs, Sae 8, Cap Screw; (B: 20, 000 Lb.) 3/4" X 3" (Hs, Sae 8) Rigid Hitch, Cap Screw; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4" X 3" Hs, Sae 8, Cap Screw; (B: (Xxxxxx- ) 4650-0164; 4850-0000) (C: ( -Xxxxxx) 4650-0192; 4850-0152) 3/4" X 3" Hs 8 Sae, Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4" X 3", (2-Joint Hookup), Cap Screw; 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4" X 3", Hs Sae 8, Cap Screw; (C: 2-Joint Hookup) 3/4" X 3", Cap Screw; 3/4" X 3" Rigid Hitch, Cap Screw; 3/4" X 3", (Sub For Ar35807), Cap Screw; 3/4" X 3" Hs=8 Sae, Cap Screw; (A) 3/4" X 3", Cap Screw; 3/4" X 3" (Hs, Sae 8) (Use With Shims), Cap Screw; 3/4" X 3" Hs Sae 8, Cap Screw; 3/4" X 3" (Hs, Sae 8), Cap Screw; (B: (Xxxxxx- ) 4250-0085; 4450-0170) (E: ( -Xxxxxx) 4250-0190; 4450-02*70) 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4" X 3", Hs Sae 8, Plated	4
19***58	Cap Screw; 3/4" X 2" (Hs, Sae 8) (Front Top), Cap Screw; 3/4" X 2" Initially Torque Bolts To 50 Lb-Ft (68 N-M) - Cycle Cylinders And Swivel Mast Through 2 Or More Full Cycles To Establish Alighment- Retorque Bolts To 280 Lb-Ft (381 N-M)- Retorque Periodically, Cap Screw; 3/4" X 2" (Hs, Sae 8) Front Top, Cap Screw; (F) 3/4" X 2" (12-1/2') Bottom, Cap Screw; 3/4" X 2" (9, 11 And 13 Std), Cap Screw; 19.050 X 50.800 mm, Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) 3/4" X 2", Cap Screw; (F) 3/4" X 2" (17-1/2'), Cap Screw; 3/4" X 2" Hs, Sae 8, Cap Screw; 3/4" X 2", (Hs-Sae 8), Cap Screw, Cap Screw; 3/4" X 2", (Use With At79706 Rim), Cap Screw; 3/4" X 2", Hs Sae 8, Cap Screw; 3/4" X 2" Top, Cap Screw, Cap Screw; 3/4" X 2" (A), Cap Screw; 3/4" X 2" (Hs, Sae 8), Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) 3/4" X 2", Cap Screw; 3/4" X 2" (A)(C), Cap Screw; 3/4" X 2", Cap Screw; 3/4" X 2" (Hs, Sae 8) Rear Bottom, Cap Screw; 3/4" X 2" Front Top, Cap Screw; 3/4" X 2", Cap Screw; 3/4" X 2" (Hs-Sae 8), Cap Screw; 3/4" X 2", Hs Sae 8, Plated, Cap Screw; 3/4" X 2" (D), Cap Screw; 3/4" X 2", Top	10
B3***7R	Washer; (A) (Sub For E38485), Washer; Both Ends, Washer; (Sub For N30644 And E38485), Washer; (Sub For N30644 Or E38485), Washer, Washer; 25/32" X 1-1/2" X 3/16", (Sub For E38485), Washer; 25/32" X 1-1/2" X 3/16", Washer; (Sub For E38485), Washer; 25/32 X 1 1/2 X 3/16, Washer; 25/32" X 1-1/2" X 3/16", Hardened, (Sub For E38485), Washer; Hardened, (Sub For E38485), Washer; 20 mm (0.781") I. D. X 35 mm (1-1/2") O.D. Hardened, (Sub For E38485), Washer; (Sub For E38485) Both Ends	10

See all parts with full part numbers in Heavy Parts AI →

Need a specific 864 - BULLDOZER part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.