John Deereplow, chisel(no series)

John Deere 685 - PLOW, CHISEL

Specifications · OEM parts breakdown

Search live 685 - PLOW, CHISEL parts Source or supply its parts

Post a parts request and compare supplier quotes.

John Deere 685 - PLOW, CHISEL specifications

Source specifications

Cylinders	4
PTO speed	540 rpm

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

685 - PLOW, CHISEL common service parts

Part number	Part	Notes
U12547	O-Ring	Scheduled service item	Check fitment →
AE14428	Elbow Fitting	Scheduled service item	Check fitment →
AN260207	Filter	Scheduled service item	Check fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

All 685 - PLOW, CHISEL assemblies by section

Every catalogued assembly group for the John Deere 685 - PLOW, CHISEL. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

3-3/4" X 12" Hydraulic Cylinder (Depth Control)(Eaton Rephasing) [B20]

John Deere : 685 - Plow, Chisel : 3-3/4" X 12" Hydraulic Cylinder (Depth Control)(Eaton Rephasing) [B20]

A4***66	End; (B: Items Included In Ae42001), End; Rear, End, End; (Use With An240670), End; (B)	1
AH***52	Hydraulic Cylinder K; 3.75" X 12", Hydraulic Cylinder K; (Use With Ah176900 Or Ah176899) Includes An260226 Piston Seal Kit, Hydraulic Cylinder K; 3.75" (Use With Ah212708), Hydraulic Cylinder K; (Use With Ah212708) Includes An260226 Piston Seal Kit, Hydraulic Cylinder K, Hydraulic Cylinder K; (Use With Ah176451) Includes An260226 Piston Seal Kit, Hydraulic Cylinder K; (Use With Ah206692), Hydraulic Cylinder K; (Includes Parts Marked (A)), Hydraulic Cylinder K; (Use With Ah176888), Hydraulic Cylinder K; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines) (Use With Ah176888 And Ah212713), Hydraulic Cylinder K; (A: 29 Ft And 36 Ft Machines) (Use With Ah176888 And Ah212713)	1
AH***88	Hydraulic Cylinder, Hydraulic Cylinder; (Sub Ah212713)	1
AN***70	Hydraulic Cylinder; (Eaton) (Sub Ah206692), Hydraulic Cylinder; (A: 23 Ft Machine), Hydraulic Cylinder; 3.75" X 12" (Sub Ah176888), Hydraulic Cylinder; (Sub Ah176888), Hydraulic Cylinder; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines) 3.75" X 12" Prince Cylinder, (Eaton), (Sub Ah176888 And Ah212713) ( Sub For Aa53182), Hydraulic Cylinder; (Sub Ah176888) 3.75" X 12", Hydraulic Cylinder; 1" Pin (Sub Ah176888), Hydraulic Cylinder; 41 Ft; 3.75" X 12" Prince Cylinder, (Sub Ah176888) Sub. For Aa53182, Hydraulic Cylinder; (B: 29 Ft Machine) (Sub Ah176888), Hydraulic Cylinder; 29 Ft And 36 Ft; 3.75" X 12" Prince Cylinder, Sub For Aa53182, Hydraulic Cylinder; 45 Ft; 3.75" X 12" Prince Cylinder, (Sub Ah176888 And Ah212713) Sub. For Aa53182, Hydraulic Cylinder; (A: 31-Ft. Base) (B: 36-Ft. Base) (C: 41-Ft. And 45-Ft. Base) (Eaton)(Sub Ah206692), Hydraulic Cylinder; 29 Ft And 36 Ft; 3.75" X 12" Prince Cylinder, (Sub Ah176888) Sub. For Aa53182, Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Eaton) (Sub Ah206692), Hydraulic Cylinder; (A: 52-Ft. Base) (Eaton) (Sub Ah206692), Hydraulic Cylinder; (B: 37 Ft Machine) 3.75" X 12" (Sub Ah176888), Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Eaton), Hydraulic Cylinder; (A: 29 Ft And 36 Ft Machines) 3.75" X 12" (Eaton), (Sub Ah176888 And Ah212713 Sub For Aa53182, Prince Cylinder)	1

See all parts with full part numbers in Heavy Parts AI →

4" X 12" Hydraulic Cylinder (Depth Control)(Eaton Rephasing) [B21]

John Deere : 685 - Plow, Chisel : 4" X 12" Hydraulic Cylinder (Depth Control)(Eaton Rephasing) [B21]

A4***08	End; X X X (Kit For An260199) (Kit For An260200), End, End; (B), End; (Use With An240671)	1
AH***76	Seal Kit; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines), Seal Kit; (Use With An240671) (Sub For An260237), Seal Kit; (Sub For An260237), Seal Kit; (Sub For An260237) (F), Seal Kit; (Sub For An260237) (E), Seal Kit; (Use With An240671 ) (Sub For An260237), Seal Kit, Seal Kit; (A: 29 Ft And 36 Ft Machines)	1
AN***71	Hydraulic Cylinder; 1" Pin, Hydraulic Cylinder; 4" X 12" (Sub Ah176855), Hydraulic Cylinder; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines) 4" X 12" Prince Cylinder, (Eaton), (Sub Ah176855 And Ah212781) (Sub For Aa53184), Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Sub Ah206690)(Eaton), Hydraulic Cylinder; (B: 29 Ft Machine), Hydraulic Cylinder; (Eaton) (Sub Ah206690), Hydraulic Cylinder; (A: 29 Ft And 36 Ft Machines) 4" X 12" Prince Cylinder, (Eaton), (Sub Ah176855 And Ah212781 ) (Sub For Aa53184), Hydraulic Cylinder; 53 Ft And 61 Ft; 4" X 12" Prince Cylinder, (Sub Ah176855 And Ah212781) Sub For Aa53184, Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Eaton) (Sub Ah206690), Hydraulic Cylinder; 45 Ft; 4" X 12" Prince Cylinder, (Sub Ah176855 And Ah212781) Sub. For Aa53184, Hydraulic Cylinder; (A: 23 Ft Machine), Hydraulic Cylinder; (Sub Ah176855), Hydraulic Cylinder; 29 Ft And 36 Ft; 4" X 12" Prince Cylinder, Sub For Aa53184, Hydraulic Cylinder; 41 Ft; 3.75" X 12" Prince Cylinder, Sub. For Aa53184, Hydraulic Cylinder, Hydraulic Cylinder; 45 Ft; 4" X 12" Prince Cylinder, (Sub Ah176855 And Ah212781)Sub. For Aa53184, Hydraulic Cylinder; (A: 52-Ft. Base) (Eaton) (Sub Ah206690)	1

See all parts with full part numbers in Heavy Parts AI →

4" X 32" Hydraulic Cylinder (Wing Fold)(John Deere) [B23]

John Deere : 685 - Plow, Chisel : 4" X 32" Hydraulic Cylinder (Wing Fold)(John Deere) [B23]

11***55	Cotter Pin; 5/16" X 2", Use A3581r Or 11h255 (Sub 11m7056), Cotter Pin; (A: For 4 And 5 Bottoms Plow) 5/16" X 2", Cotter Pin, Cotter Pin; 5/16" X 2", (Included With Cylinder), Cotter Pin; 5/16" X 2", Cotter Pin; (B) 5/16" X 2", Cotter Pin; 5/16" X 2", (Sub For 11m7056), Cotter Pin; 5/16" X 2" (Included With Cylinder), Cotter Pin; 7.925 X 50.800 mm (5/16" X 2")	0
14***08	Nut; 5/8", (Sub 14h1083), Nut; 5/8",12.4-38,13.6-38 15.5-38,16.9-38,16.9-30, Nut; 5/8", Nut; 5/8",12.4-38,13.6-38, Nut; 5/8", Unf, Nut; (B) 5/8"	4
19***31	Bolt; 3/8" X 1" (Use With Ah120210), Bolt; 3/8" X 1", Used With Fiber Glass Seed Hopper, Bolt; (D: (Xxxxxx- ) 4050-00*52; 4250-0191; 4450-0229) 3/8" X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (Less Power Steering), Bolt; 3/8"X1" (Sub For R53664 Appl), Bolt; 3/8" X 1" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Bolt; 3/8" X 1", (A), (B), Bolt; (A: To Oil Pan) 3/8" X 1", Bolt; 3/8" X 1" Rear, Lh, Bolt; 3/8" X 1" (Sub For R82389), Bolt; 3/8" X 1-1/8", Bolt; 3/8" X 1" (Hs, Sae 8) (Use With Mg86504854), Bolt; 3/8" X 1", (Cornhead Attachment), Bolt; 3/8" X 1" (920-Use 19; 922, 924, 925-Use 24; 930-Use 29), Bolt; (Ord L62369, 19m7166), Bolt; 3/8" X 1", Code 2102, Bolt; 3/8" X 1", (Use With N214761), Bolt; (A: 75cc) 3/8" X 1", Bolt; 3/8" X 1", For 6-Tooth Section, Bolt; 3/8x1", Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1" (Not Used With Fenders), Bolt; 3/8" X 1", For 8-Tooth Section, Bolt; 3/8" X 1", (Use With Aw19004), Bolt; 3/8" X 1", (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1" (W/O Sgb), Bolt, Bolt; 3/8" X 1", (Use With R90561 This Application), Bolt; 3/8" X 1", (Rc, Ru, Rus), Bolt; 3/8" X 1", (Use With Re63295), Bolt; 3/8" X 1" Lh, Bolt; 3/8"X1" (Ord L62369, 19m7166), Bolt; (A) 3/8" X 1", (Oil Lines To Clutch Housing), Bolt; 3/8" X 1" (Sgb) Nlr, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; 3/8" X 1", Code 2314 (Af Only) (Fan To R90561), Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Hi-Crop), Bolt; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 1", Bolt; 3/8" X 1" (To Oil Pan), Bolt; 3/8" X 1", (13 Used, Rc And St) (11 Used, Ru And Or), Bolt; 3/8" X 1" (Ord L62369, 19m7166), Bolt; 3/8" X 1", 4020 Or 4010 Tractor, Bolt; (Sub For 19h1731), Cap Screw; (Use With R127394), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X1", Bolt; 3/8" X 1", (9 Used Gasoline, 8 Used Diesel), Bolt; 3/8" X 1" (Use With N10215), Bolt; 3/8" X 1", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 3/8" X 1" (Lh), Bolt; 3/8" X 1", (Ru And Or), Bolt; 3/8" X 1", (Sub For Hmx04057), Bolt; (A) 3/8"X1", Bolt; X X 3/8" X 1", Bolt; 3/8" X 1" (Use With Re63295), Bolt; (C) 3/8" X 1", Bolt; (C) 3/8"X1", Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel), Bolt; 3/8" X 1", 28" Rows Only, Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel) (Use With Dual Selective Control), Bolt; (A) (C) 3/8"X1", Bolt; 3/8" X 1" (Sub 19h3771, This Application), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1", (Use With 12h304), Bolt; 3/8" X 1" (Use With 14h732), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (Front), Bolt; (B) 3/8" X 1", (Not Used On 570), Bolt; 3/8" X 1" 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (6359tr), Bolt; (A: Mg803115 Light Kit) 3/8" X 1", Bolt; 3/8" X 1", (11 Used Gasoline) (10 Used Diesel) (Use With Single Selective Control), Bolt; 3/8" X 1", (5200), Bolt; 3/8" X 1", (12 Used Gasoline) (11 Used Diesel) (Less Selective Control), Bolt; 3/8" X 1", (Mower Bar), Bolt; 3/8" X 1", 7 mm (28") Rows, Bolt; 3/8" X 1", (24 And 224 Balers), Bolt; 3/8" X 1", 5720 Model Only, Bolt; 3/8" X 1", (Mower Bar Only), Bolt; 3/8"X1" (Sub For T22984), Bolt; (C: ( -Xxxxxx) 4055-0086; 4255-0080; 4455-0157) 3/8" X 1", Bolt; (B: Less Rockshaft) 3/8" X 1", Bolt; 3/8" X 1" (Order R46567), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; Ar, 3/8" X 1", Bolt; (C: (Xxxxxx- ) 4250-0096; 4450-0186) 3/8" X 1" (Sgb), Bolt; 3/8" X 1", (Use With H149504), Bolt; 3/8" X 1" (Use With Re508040), Bolt; 3/8" X 1", (Rc And St), Bolt; 3/8" X 1", (2 Used, North America) (1 Used, Europe), Bolt; 3/8" X 1", (Use With Ar77343), Bolt; 3/8" X 1" (Nla), Bolt; (B) (C) 3/8" X 1", Bolt; 3/8"X1", Bolt; 3/8" X 1", Full Thread, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Cap Screw; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1", (Sub 19h3771, This Application), Bolt; 3/8" X 1" (150 Per Cent Beater Speed) (Single-Range), Bolt; 3/8" X 1" (Sub For R53663, This Application), Bolt; 3/8" X 1" (Use With H99923), Bolt; 3/8" X 1", (Row-Crop), Bolt; 3/8" X 1" (4 Used, Rh; 5 Used, Lh), Bolt; 3/8" X 1", (Used With Gresen Valve), Bolt; 3/8" X 1" (For R500355), Bolt; 3/8" X 1", Ar, Bolt; 3/8" X 1", (31 Used, 6'; 43 Used, 8'), Bolt; 3/8" X 1" (To Front Frame), Bolt; (B: Mg803116 Warning Light Kit) 3/8" X 1", Bolt; (B: For 75cc Hydrostatic Pump) 3/8" X 1", Bolt; (B: W/O Sound-Gard Body) 3/8" X 1", Bolt; (E) 3/8" X 1", Bolt; (A) (B) 3/8" X 1", Bolt; 3/8" X 1", (Corn Head And Three Row Narrow Row-Crop Units), Bolt; 3/8" X 1" (8 Used Dual) (12 Used Triple), Bolt; (A) 3/8" X 1", (Or, Ut), Bolt; 3/8"X1, Bolt; 3/8" X 1" (Flexible), Bolt; 3/8" X 1", (675b) (Use With Mg622490), Bolt; 3/8"X1-1/8", Bolt; (D) 3/8" X 1", Bolt; 3/8" X 1" (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (4 Used, 347; 6 Used, 467), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Hs, Sae 8) (Sub 19h3771, This Application), Bolt; X 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (Use With Bp12233), Bolt; (A: Less Rockshaft) 3/8" X 1", Bolt; (A: Sound-Gard Body) 3/8" X 1", Bolt; 3/8" X 1", When Marker Arms Are Attached To Planter, Bolt; Retainer To Clutch Control Valve, Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1", (Single-Range) (150 Per Cent Beater Speed), Bolt; 3/8"X1" (Sub For R53663 Appl), Bolt; 3/8" X 1" (Sub For 22h836), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312), Bolt; 3/8" X 1", 4010 Or 4020 Tractor, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; 3/8" X 1", (K1) (K2), Bolt; 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1", (9 Used, Long Tongue) (5 Used, Short Tongue), Bolt; 3/8" X 1", (4 Used, A) (8 Used, B), Bolt; 3/8" X 1" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Bolt; 3/8" X 1" R.H., Bolt; (A) 3/8" X 1", Bolt; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 3/8" X 1" (Sub For R82389), Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (3 Used, 660,670) (5 Used, 671), Bolt; 3/8" X 1", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Bolt; 3/8" X 1" (Hydrostatic Drive), Bolt; 3/8" X 1", To Clutch Housing, Bolt; 3/8" X 1" (Less Rockshaft), Bolt; 3/8" X 1", 28-Inch Rows, Bolt; (E: (Xxxxxx- ) 4050-0007; 4250-0182; 4450-02**30) 3/8" X 1" (Sub For R82389), Bolt; 3/4"X1", Bolt; (B) 3/8" X 1" L.H., Bolt; 3/8" X 1", (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (5 Used Syncro-Range) (6 Used Power Shift), Bolt; (B: Used Without Warning Lamp) 3/8" X 1", Bolt; 3/8" X 1" (Use With H149504), Bolt; 3/8" X 1", (Lp-Gas), Bolt; (B: Hi-Crop) 3/8" X 1", Bolt; (K) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (Use With Ah120210)	1
24***45	Washer; 1-9/32" X 2" X 0.105" (A), Washer; 1-9/32" X 2" X 0.105" (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", Washer; .105" X 1-9/32" X 2", Washer; 1-9/32" X 2" X 0.105" (Used With 1-1/4" Pin), Washer; (B) 1-9/32" X 2" X 0.105", Washer; 32.537 X 50.800 X 2.667 mm (1-9/32" X 2" X 0.105"), Washer, Washer; (A: Up To Series 625 ( -06*43), 630 ( -0633)) 1-9/32" X 2" X 0.105", Washer; (A: Starting From Series Number 625 (0644- ), 630 (06*34- )) 1-9/32" X 2" X 0.105", Washer; 1-9/32" X 2" X 0.105" (With 1-1/4" Pin)	4

See all parts with full part numbers in Heavy Parts AI →

4-1/4" X 12" Hydraulic Cylinder (Depth Control)(Eaton Rephasing) [B22]

John Deere : 685 - Plow, Chisel : 4-1/4" X 12" Hydraulic Cylinder (Depth Control)(Eaton Rephasing) [B22]

AH***78	Hydraulic Cylinder K; (Use With An240672) (Sub For An260238), Hydraulic Cylinder K; (Sub For An260238) (F), Hydraulic Cylinder K; (Sub For An260238) (G), Hydraulic Cylinder K; (Sub For An260238)	1
AH***73	Hydraulic Cylinder	1
AN***72	Hydraulic Cylinder; (Sub Ah176873) 4.25" X 12", Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Sub Ah176455) (Eaton), Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Eaton) (Sub Ah176455), Hydraulic Cylinder; 53 Ft And 61 Ft; 4.25" X 12" Prince Cylinder, (Sub Ah176873)Sub For Aa53186, Hydraulic Cylinder; (B: 29 Ft Machine) (Sub Ah176873), Hydraulic Cylinder; 1.25" Pin (Sub Ah176873), Hydraulic Cylinder; (Sub Ah176873), Hydraulic Cylinder; (Eaton) (Sub Ah176455), Hydraulic Cylinder; 45 Ft; 4.25" X 12" Prince Cylinder, (Sub Ah176873) Sub For Aa53186, Hydraulic Cylinder; 4.25" X 12" Prince Cylinder, (Eaton), (Sub Ah176873) (Sub For Aa53186)	1
N2***71	End; (Use With An240672), End; (G) (H), End, End; (F), (G), End; (Use With An240673)	1

See all parts with full part numbers in Heavy Parts AI →

5 X 16" Hydraulic Cylinder (Outer Wing Fold)(Prince) [B24]

John Deere : 685 - Plow, Chisel : 5 X 16" Hydraulic Cylinder (Outer Wing Fold)(Prince) [B24]

11***55	Cotter Pin; 5/16" X 2", Use A3581r Or 11h255 (Sub 11m7056), Cotter Pin; (A: For 4 And 5 Bottoms Plow) 5/16" X 2", Cotter Pin, Cotter Pin; 5/16" X 2", (Included With Cylinder), Cotter Pin; 5/16" X 2", Cotter Pin; (B) 5/16" X 2", Cotter Pin; 5/16" X 2", (Sub For 11m7056), Cotter Pin; 5/16" X 2" (Included With Cylinder), Cotter Pin; 7.925 X 50.800 mm (5/16" X 2")	4
14***63	Nut; (B: Dubuque (T0) Esn -74*89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 3/4", Nut; 3/4" (Sub 14h902, This Application And 11h279), Nut; (B: Dubuque (To) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 3/4", Nut; 3/4" (Use With Ah212777), Nut; (A: Dubuque (T0) Esn 7490-) (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) 3/4", Nut; (B: Dubuque (To) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx)) 3/4", Nut; (A: Dubuque (T0) Esn -7489) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) 3/4", Nut; 3/4", (Sub For B31721), Nut; (B: Dubuque (To) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 3/4", Nut; 3/4" (Not Used When Au10861 Or Au10810 Has Been Installed As A Replacement Part For Au42219), Nut; (Use With Ah207917), Nut; 3/4", (Not Included In Ty20280), Nut; (D) 3/4", (Sub For B31721) Lower, Nut; 3/4", Without Axle Extensions, Nut; 3/4", (Without Link Assembly), Nut; 3/4", With Axle Extensions, Nut, Nut; 3/4" (670,770), Nut; 3/4", (Sub 14h794 And 19h2084), Nut; 3/4" Unf, Rear - Mainshaft, (Sub For Et10728), Nut; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 3/4", Nut; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 3/4", Nut; 3/4", (12 Used L.H.) (12 Used R.H.), Nut; (A) 3/4", Nut; (C) 3/4", Nut; 3/4", Nut; 3/4" 3/4", Nut; 3/4", (Sub For B31721) (Use With B31719), Nut; (B: Dubuque (T0) Esn 74**90-) (C: Saran (Cd) Esn Xxxxxx-) 3/4", Nut; 3/4", Unf	4
19***84	Cap Screw; 3/8" X 7/8" (Also Order (2) 24h1305), Cap Screw; 3/8" X 7/8", (Dry Type Air Cleaner), Cap Screw; 3/8" X 7/8" (Rear), Cap Screw; (C) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (2501), Cap Screw; 3/8" X 7/8", Up, Cap Screw; 3/8"X7/8" (Sub For 19h1732), Cap Screw; 3/8" X 7/8", (Lower) (Power Shift), Cap Screw; 3/8" X 7/8" (For R122196), Cap Screw; 9.525 X 22.225 mm, Cap Screw; 3/8"X7/8" Appl, Cap Screw; 3/8"X7/8", (Sub For 19h1732), Cap Screw; 3/8" X 7/8" (Sub T53268, This Application), Cap Screw; 3/8" X 7/8" (Use With Re33058), Cap Screw; (B: (Xxxxxx-) 4555-01*00; 4755-0101; 4955-0149) 3/8" X 7/8", Cap Screw; 3/8" X 7/8" (Use With R62371), Cap Screw; (A), Cap Screw; (B: (Xxxxxx-) Esn 4650-3215; 4850-3246) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", 8650 Tractor, Cap Screw; 3/8" X 7/8" Radiator Support, Cap Screw; 3/8" X 7/8", (Ru And Or), Cap Screw; 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Ea-6), Cap Screw; 3/8" X 7/8", (Na-6, Gn-01), Cap Screw; 3/8" X 7/8", (Use With Re19268 And Re33058), Cap Screw; 3/8" X 7/8" Front Frame, Cap Screw; 3/8" X 7/8" (Use With Re63295), Cap Screw; 3/8" X 7/8", (Use With Ar87024 Or Ar87023), Cap Screw; 3/8" X 7/8", Cap Screw; (A: (-Xxxxxx) 4650-0177; 4850-01**15) 3/8" X 7/8", Cap Screw; 3/8" X 7/8" (Use With 14h812), Cap Screw; 3/8" X 7/8" (Rg),. Bolt, Cap Screw; 3/8" X 7/8" (Use With 12h304 And 14h812), Cap Screw; (A) 3/8" X 7/8", Cap Screw; (A) (B) 3/8" X 7/8", Cap Screw; 3/8"X7/8" (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (9 Used Diesel) (6 Used Gasoline), Cap Screw; 3/8" X 7/8", (Dn-02), Cap Screw; (B) 3/8"X7/8", Cap Screw; 3/8" X 7/8" (Sub At48506), Cap Screw; 3/8" X 7/8" (Less Power Take-Off), Cap Screw; 3/8" X 7/8" (4050), Cap Screw; 3/8" X 7/8", (Use With Re46821), Cap Screw; 3/8"X7/8" (Sub For 19h1732, 19h2245), Cap Screw; 3/8" X 7/8" Use With Ar91662, Cap Screw; 3/8" X 7/8", (Code 2909), Cap Screw; 3/8" X 7/8" Up, Cap Screw; 3/8"X7/8" (Sub For 19h1731), Cap Screw; 3/8" X 7/8", (Use With R62371), Cap Screw; 3/8" X 7/8", (Sub T53268, This Application), Cap Screw; (A: 75cc) 3/8" X 7/8", Cap Screw; 5/16"X1", Cap Screw; 3/8" X 7/8", (Use With R100259), Cap Screw; (Fan Pulley To Hub), Cap Screw; 3/8" X 7/8" (Use With 12h304), Cap Screw; 3/8" X 7/8", (2501,9177), Cap Screw; 3/8" X 7/8" (Sub For 19h1648, This Application), Cap Screw; 3/8" X 7/8", (Oil Bath Air Cleaner), Cap Screw; 3/8" X 7/8", (Diesel), Cap Screw; (D) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Upper), Cap Screw; 3/8" X 7/8", (Use With Re63295), Cap Screw; 3/8" X 7/8", (Gasoline And Lp-Gas), Cap Screw; 3/8"X7/8" (Sub For At20727), Cap Screw; 3/8" X 7/8", (Row-Crop And Standard) (2 Used Hi-Crop), Cap Screw; 3/8" X 7/8" (Use With R100259), Cap Screw; 3/8" X 7/8", (To Upper Rh Thermostat Housing) 6216, Cap Screw; 3/8" X 7/8", (Ru, Rc), Cap Screw; 3/8"X7/8", Cap Screw; 3/8" X 7/8" (5460, 5820, 8630, 8640, 8650), Cap Screw; 3/8" X 7/8", (Ea-D, Ea-G, De-01, Ge-01), Cap Screw; 3/8" X 7/8", (Use With Re33058), Cap Screw; 3/8" X 7/8", (5400), Cap Screw; (A) 3/8"X 7/8", Cap Screw; 3/8"X7/8" (Ord 19h1731), Cap Screw; (A) 3/8"X7/8", Mechanical Front Wheel Drive, Cap Screw; (B: Engine Serial No.) 3/8" X 7/8", Cap Screw; 3/8"X7/8" (W/ At19509), Cap Screw; (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (Motorola), Cap Screw; (B) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", Code 2306 And 2307, Cap Screw; (Lu) (Orchard Fenders), Cap Screw; 3/8"X7/8" (For Ce15214), Cap Screw; 3/8" X 7/8" (Front), Cap Screw; 3/8" X 7/8", (Orchard Fenders), Cap Screw; 3/8"X4", Cap Screw; (Orchard Fenders), Cap Screw; 3/8" X 7/8", (Use With Re33058), Cap Screw; 3/8" X 7/8" (Dn-03, Nb-D), Cap Screw; 3/8" X 7/8", Code 2310, Cap Screw; 3/8" X 7/8", (Use With R81911) Code 2501 And 2503, Cap Screw; 3/8" X 7/8", (Use Wite Re20982), Cap Screw; 3/8"X7/8" (For Al39725), Cap Screw; 3/8" X 7/8" 3/8" X 7/8", Cap Screw; X 3/2" X 7/8", Cap Screw; 3/8" X 7/8" (Use With Re55714), Cap Screw; 3/8" X 7/8" 3/8"X7/8", Cap Screw; (A) 3/8"X7/8", Cap Screw; 3/4" X 3/4", Cap Screw; 3/8" X 7/8", (Use With Re19265), Cap Screw; 3/8" X 7/8" (Use With R122196), Cap Screw; 3/8" X 7/8", (9 Used (A)) (6 Used (B)), Cap Screw; 3/8"X5/8", Cap Screw; (Use With Ar87023 Or Ar87024), Cap Screw; 3/8" X 7/8", (Use With Re33058 Re19268 And Ar66398), Cap Screw; 3/8"X7/8" (For At19509), Cap Screw; 3/8" X 7/8", (Use With Re30427), Cap Screw; (B: For 75cc Hydrostatic Pump) 3/8" X 7/8", Cap Screw; 9.525 X 22.225 mm (3/8" X 7/8"), Cap Screw, Cap Screw; 3/8" X 7/8", (Use With Ar77343), Cap Screw; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Use With Ar91662), Cap Screw; 3/8" X 7/8", (Use With Re20982), Cap Screw; Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 7/8" (Long), Cap Screw; 3/8" X 7/8", (Code 2819), Cap Screw; 3/8" X 7/8" (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (Na-D, Na-G, Dn-01, Gn-01), Cap Screw; 3/8" X 7/8", (Use With Cover Marked R52880 0r Re27895), Cap Screw; 3/8" X 7/8", (Power Shift), Cap Screw; 3/8" X 7/8" (Use With Re19268 And Re33058), Bolt, Cap Screw; 3/8" X 7/8", (Use With Ar87023 Or Ar87024), Cap Screw; 3/8" X 7/8" (For Al39725), Cap Screw; 3/8" X 7/8", (Rs, Ut, Or, Rus), Cap Screw; (A) (B) (C) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", Not Used This Application	1
24***45	Washer; 1-9/32" X 2" X 0.105" (A), Washer; 1-9/32" X 2" X 0.105" (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", Washer; .105" X 1-9/32" X 2", Washer; 1-9/32" X 2" X 0.105" (Used With 1-1/4" Pin), Washer; (B) 1-9/32" X 2" X 0.105", Washer; 32.537 X 50.800 X 2.667 mm (1-9/32" X 2" X 0.105"), Washer, Washer; (A: Up To Series 625 ( -06*43), 630 ( -0633)) 1-9/32" X 2" X 0.105", Washer; (A: Starting From Series Number 625 (0644- ), 630 (06*34- )) 1-9/32" X 2" X 0.105", Washer; 1-9/32" X 2" X 0.105" (With 1-1/4" Pin)	4

See all parts with full part numbers in Heavy Parts AI →

Chisel Sweeps [C06]

John Deere : 685 - Plow, Chisel : Chisel Sweeps [C06]

N1***88

Sweep; Chisel, 152 mm (6") (Sub For N61113), Sweep; (A: Wheatland Sweeps) 152 mm (6"), Sweep; (F: Chisel Sweeps) 152 mm (6"), Sweep; Chisel 152 mm (6"), Sweep; 6" (Sub For N61113), Sweep; 152 mm (6") (Sub For N61113), Sweep; 152 mm (6"), Sweep; (E: Chisel Sweeps) 152 mm (6"), Sweep; (Sub For N61113)

See all parts with full part numbers in Heavy Parts AI →

Concave Twisted Double Point Shovels [C10]

John Deere : 685 - Plow, Chisel : Concave Twisted Double Point Shovels [C10]

N1***12	Shovel; R.H. 76 mm X 610 mm (3" X 24"), Shovel; (C: Concave Twisted Double Point Shovels) 76 mm X 610 mm (3" X 24") R.H., Shovel, Shovel; Twisted R.H. Double Pointed Concave 76 X 610 mm (3 X 24"), Shovel; 76 X 610 mm (3" X 24") Twisted Rh Double Pointed Concave, Shovel; (D: Concave Twisted Double Point Shovels) 76 mm X 610 mm (3" X 24") Rh, Shovel; (E: Shovels) 76 X 610 mm (3 X 24") Twisted R.H. Double Pointed Concave, Shovel; (D: Concave Twisted Double Point Shovels) 76mm X 610mm (3"X 24") R.H., Shovel; (D: Concave Twisted Double Point Shovels) 76 mm X 610 mm (3" X 24") R.H.	1
N1***13	Shovel; (D: Concave Twisted Double Point Shovels) L.H. 76 mm X 610 mm (3" X 24"), Shovel; (D: Concave Twisted Double Point Shovels) 76 mm X 610 mm (3" X 24") Lh, Shovel; (C: Concave Twisted Double Point Shovels) 76 mm X 610 mm (3" X 24") L.H., Shovel; Twisted L.H. Double Pointed Concave 76 X 610 mm (3 X 24"), Shovel; 76 X 610 mm (3" X 24") Twisted Lh Double Pointed Concave, Shovel; (E: Shovels) 76 X 610 mm (3 X 24") Twisted L.H. Double Pointed Concave, Shovel; (D: Concave Twisted Double Point Shovels) 76mm X 610mm (3"X 24") L.H., Shovel; L.H. 76 mm X 610 mm (3" X 24")	1

See all parts with full part numbers in Heavy Parts AI →

Decals [C11]

John Deere : 685 - Plow, Chisel : Decals [C11]

AA***91	Kit; "Model Designation Kit" Located On Right Side Main Frame. One On Outside Of Long Tube; Main Frame Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link, Kit; "Model Designation" One On Right Side Of Main Frame, And One On Left Side Of Main Frame., Kit; "Model Desgination" One On R.H. Side Of Main Frame And One On L.H. Side Of Main Frame., Kit; "Model Designation" Located On Outside Of Each Wing, Kit; "Model Designation" One On R.H. Side Of Main Frame, And One On L.H. Side Of Main Frame., Kit; "Model Designation" Centered On Right Side Of Truss Tube Between Front Standards, Kit; "Model Designation Kit" 75mm, Kit, Kit; "Model Designation" One On Each Side Of Main Frame, Kit; "Model Designation" Kit, Outside And Front Of Truss Tube, Kit; Model Number Repair, Kit; "Model Designation" (One On Right Side Of Main Frame, And One On Left Side Of Main Frame., Kit; Model Number Repair, (Sub An232259), Kit; Kit, Model Number Repair, Kit; "55" - Located On R.H. Mast Plate, Kit; "Model Designation" Centered On Left Side Rear Of Main Frame Tube	1
AN***86	Label Kit; (Spanish), Label Kit; Spanish	1
AN***43	Decal Kit; French, Decal Kit; Misc. Tillage (French), Decal Kit; French (Misc. Tillage)	1
JD***95	Label; (A: "Leaping Deer"; Located On Cart Frame Near The Caster Wheel), Label; "Leaping Deer" Located On Right Side Of Mast, Label; "Leaping Deer" - Located On Both Sides Of Hitch Tongue, Label; "Leaping Deer", Label; Leeping Deer, Label; (Sub Jd5712) Leaping Deere 76 mm (3"), Label; "Leaping Deer"; Located On Cart Frame Near The Caster Wheel, Label; Leaping Deere 70 mm, Label, Label; (For Early Gear Case Without Leaping Deer Logo Embossed In Casting), Label; (Sub Jd5712)Leaping Deere (70 mm), Label; Leaping Deere (L.H. Side Of Tube), Label; Leaping Deer (For 102 X 102 mm (4" X 4") Frame), Label; Leaping Deer, Label; (Sub Jd5712) Leaping Deer, Label; (Sub Jd5912), Label; "Leaping Deer" - Rear Of Main Frame., Label; (3") Leaping Deere, Label; (Leaping Deer), Label; Leaping Deer (On Plow), Label; Leaping Deer 70 mm, Label; (Sub Jd5712)Leaping Deer 70 mm, Label; "Leaping Deer" - R.H. And L.H. Side Of Two Bottom Hitch, Label; "Leaping Deer" - Located On Vegetable Seed Hopper And 41a Hydraulic Marker, Label; (Sub Jd5712)Leaping Deer	1

See all parts with full part numbers in Heavy Parts AI →

Depth Control And Hydraulic Flow Control Valves [B15]

John Deere : 685 - Plow, Chisel : Depth Control And Hydraulic Flow Control Valves [B15]

03***27	Bolt; 5/16" X 3-1/2", (Use With M18936), Bolt; 5/16" X 3-1/2"	1
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	1
AA***73	Seal Kit, Seal Kit; Valve Repair	1
AN***53	Union Fitting; (Includes (2) R26375, R27448 And R27449), Union Fitting, Union Fitting; Includes (1) R27448 Nut And (1) R27449 Washer, Union Fitting; (Use With N132040), Union Fitting; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Union Fitting; 148 (-04*00), 158 (-04*00), 168, Union Fitting; (For Use With Hydraulic Driven Pump), Union Fitting; (For Dual Cylinder), Union Fitting; 8r Wide, 12r Narrow, Optional For 8r Narrow, Union Fitting; (Sub For R63922, This Application) Includes R27448 Nut, Union Fitting; 12' Mf - 12' Inner - 6' Outer Floating, Union Fitting; (A), Union Fitting; (Includes (4) R27448), Union Fitting; (Includes R27448 Nut And Washer), Union Fitting; (B: 8000 & 9000 Series Tractors), Union Fitting; Hose Kit, 12' Mf - 12' Inner - 6' Outer Floating, Union Fitting; Optional, Union Fitting; 12' Mf - 12' Inner - 6' Hose Kit, Outer Floating, Union Fitting; (Inlcudes R27448 Nut And Washer), Union Fitting; (Includes(2) R26375o-Ring, R27448nut And R27449 Washer)	1

See all parts with full part numbers in Heavy Parts AI →

Depth Control Hydraulics [B16]

John Deere : 685 - Plow, Chisel : Depth Control Hydraulics [B16]

19***32	Screw; 3/8" X 1-1/4", (Single-Range) (100 Per Cent Beater Speed), Screw; 3/8" X 1-1/4" Rh, Screw; 3/8" X 1", Screw; 3/8" X 1-1/4" (Use With Ar54556), Screw; 3/8" X 1-1/4", (Na-D), Screw; 3/8" X 1-1/4", (Lower Holes), Screw; 3/8" X 1-1/4" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Screw; 3/8" X 1 1/4", Screw; 3/8" X 1-1/4", (Use With R52288 Or R81927), Screw; 3/8" X 1-1/4", Use With Furrower, Screw; 3/18" X 1-1/4", Screw; 3/8x1-1/4", Screw; (A) (B) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (Per Plate) (Use With H119094), Screw; 3/8" X 1-1/4", (22 Used, Variable Drive; 26 Used, Long), Screw; 3/8" X 1-1/4", (Rs, Ut), Screw; 3/8" X 11/4", Screw; 3/8" X 1-1/4" (Use With 12h304), Screw; 3/8" X 1-1/4", 3/8" X 1 1/4", Screw; 3/8" X 1-1/4", (For Kohler Engine), Screw; 3/8" X 1-1/4", For 14 Harrow, Screw; 3/8" X 1-1/4", (Sidehill), Screw; 3/8" X 1-1/4" (2 Used, Belt Drive; 1 Used, Hydrostatic Drive), Screw; 3/8" X 3-1/4" (Sub For 19h2458), Screw; X 3/8" X 1" (Sub For 03h1519), Screw, Screw; 3/8" X 1-1/4", Use With Furrower Only, Screw; (A: W/O Sgb) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (Per Wheel), Screw; (A) 3/8" X 1-1/4", Screw; 3/8"X1-1/4", Screw; 3/8"X1-1/4" (Sub For 19h988), Screw; 3/8"X1"-1/4" (Sub For 19h988), Screw; 3/8" X 1-1/4" (2 Used-Belt Drive; 1 Used-Hydrostatic Drive), Screw; 3/8" X 1-1/4", (Use With Ar54556), Screw; 3/8" X 1-1/4", (Sub For F2273r), Screw; (A: For Drill With Odd Number Of Rows) 3/8" X 1-1/4" (Tru-Vee), Screw; 3/8" X 1-1/4", For Mounting Compressor Drive Pulley, Screw; 3/8" X 1-1/4", (Variable Drive), Screw; 3/8"X1-1/4, Screw; 3/8" X 1-1/4", Dual, Screw; 3/8" X 1-1/4", For 15 Harrow, Screw; 3/8"X1"-1/4", Screw; (A) 3/8"X1-1/4", Screw; 3/8" X 1-1/4", (Use With N157426), Screw; 3/8" X 1-1/4" (Rh), Screw; 3/8" X 1-1/4" 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (R.H. Footrest To Clutch Housing), Screw; 3/8" X 1-1/4", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Screw; 3/8" X 1-1/4", (Per Plate), Screw; 3/8"X11/4", Screw; 3/8" X 1-1/4", (4 Used Gasoline And Diesel) (2 Used Lp-Gas), Screw; 3/8" X 1-1/4" (Extension), Screw; 3/8" X 1-1/4", (Front), Screw; 3/8" X 1-1/4" (Use With 14h812 And 24h1305), Screw; 3/8" X 1-1/4" 3/8" X 1 1/4", Screw; 3/8" X 1-1/4" (Sub For 19h1936), Screw; 3/8" X 1-1/4", Ord W/ (2) 12h304, Screw; (C) (D) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" (Use With Re502196), Screw; 3/8" X 1-1/4", (Sub For 19h2461), Screw; 3/8" X 1-1/4" (Use With 12h309 And 14h812), Screw; 3/8" X 1-1/4" 3/8"X1 1/4", Screw; (A) (C) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" (100 Per Cent Beater Speed) (Single-Range), Screw; (Or Ord 19m7786 (M10 X 30)), Screw; 3/8" X 1-1/4", Per Plate, (Use With H119096), Screw; 3/8"X1-1/4" (For L31065), Screw; 3/8" X 1-1/4" (3020e, 3020l), Screw; 3/8" X 1-1/4", (Use With Ar45917 Or R66684 On 3020&) (3020, 3020&), Screw; 3/8" X 1-1/4", (Dual), Screw; (A: Less Power Take-Off) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", Used With Furrowers, Screw; (A: (-Xxxxxx) 7710-0027; 7810-0092) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (Diesel), Screw; 3/8" X 1-1/4", (For Odd Row) (Tru-Vee), Screw; 3/8" X 1-1/4", For 15'3" Harrow, Screw; 3/8" X 1-1/4", (Syncro-Range), Screw; 3/8" X 1-1/4", (Modified 5200 And 5400), Screw; 3/8" X 1-1/4", (Use With 12h304 And 14h1076), Screw; 3/8"X3-1/4", Screw; 3/8"X1", Screw; 3/8" X 1-1/4" (Sub 19h3239), Screw; 3/8"X1-1/4" (For L32670), Screw; 9.525 X 31.750 mm, Screw; 3/8" X 1-1/4" (Use With N10215), Screw; 9.525 X 31.750 mm (3/8" X 1-1/4"), Screw; 3/8" X 1-1/4" (Per Plate), (Use With H119096), Screw; (B) 3/8" X 1-1/4", Screw; 3/8"X1-1/4" (Sub For L32504), Screw; 3/8" X 1-1/4", Right Rear Side Hole, Screw; (B) 3/8"X1-1/4", Screw; 3/8" X 1-1/4" 9 Standard, Screw; 3/8" X 1-1/4" (Use With 12h304), (Diesel), Screw; 3/8" X 1-1/4", (With Engine Coolant Heater), Screw; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Screw; 3/8" X 1-1/4", (Lower), Screw; 3/8" X 1-1/4" (675), Screw; 3/8" X 1-1/4", R.H. (Footrest To Clutch Housing), Screw; 3/8" X 1-1/2", Screw; X 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (16 Used, 6'; 24 Used, 8'), Screw; (B) 3/8" X 1-1/4", Control Support Side, Screw; 3/8" X 1-1/4" (Per Plate) (Use With H119095), Screw; 3/8" X 1-1/4" (Use With 14h812), Rear, Screw; 3/8" X 1-1/4", (Sub 19h3239), Screw; 3/8" X 1-1/4", (Power Front Wheel Drive), Screw; 3/8", Screw; (Code 1709), Screw; 3/8" X 1-1/4", (Use With Power Front Wheel Drive), Screw; Grid 1f15, Screw; 3/8" X 1-1/4" (Less Differential Lock), Screw; 3/8" X 1-1/4" (Use With 14h812), Screw; 3/8" X 1-1/4" (B), Screw; 3/8" X 1-1/4", (47-Foot Boom), Screw; 3/8" X 1-1/4" (With Extension), Screw; 3/8"X1-1/4" (Sub For 19h1731), Screw; 3/8" X 1-1/4", (Sub For R2273r), Cap Screw; 3/8" X 1-1/4", Screw; (A: Used With Warning Lamp) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1", Screw; (A: Sound-Gard Body) 3/8" X 1-1/4", Screw; (B: W/O Sound-Gard Body) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" (Belt Drive), Screw; 3/8" X 1-1/4" (Hs, Sae 8), Screw; 3/8" X 1-1/4", Use With Furrower; For 4w, 6n, 6w, Screw; 3/8" X 1-1/4", Or Ord 19m7786 (M10 X 30), Screw; 3/8" X 1-1/4" (Use With 19h1732), Screw; 3/8" X 1-1/4" (Rear), Screw; 3/8" X 1-1/4" (3020, 3020&), Screw; 3/8" X 1-1/4", (Per Plate) (Use With H119095), Screw; 3/8" X 1-1/4" Sgb, Screw; 3/8" X 1-1/4" (Use With 14h812), (Extension), Screw; 3/8" X 1-1/4", Use With Furrowers Only, Screw; (C) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", For 10' And 12' Harrows, Screw; 3/8" X 1-1/4", (Sub For Ar45917) (3020&), Screw; 3/8" X 1-1/4", Runner Opener Only, Screw; 3/8"1-1/4", Screw; 3/8" X 1-1/4", (5200), Screw; 3/8" X 1-1/4", Screw; (B) 3/8"X1-1/4" (Sub For 19h988), Screw; 3/8" X 1-1/4" (Use With Ah227021), Screw; (C: 5303 (-00*07), 5403 (-00*42).) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (3.1 M (10-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Screw; 3/8" X 1-1/4", To Transmission Case, Screw; 3/8" X 1-1/4", (700), Screw; 3/8" X 1-1/4", (Use With Re502196), Bolt, Screw; 3/8"X1/4", Screw; 9.525 X 31.750 mm (3/8" X 1-1/4") (854a), Screw; 3/8" X 1-1/4", (2 Used, Variable Drive; 4 Used, Long), Screw; 3/8" X 1-1/4", (Use With 14h1076 And 12h304), Screw; X 3/8" X 1-1/4", Screw; (A) (Use With Ar82453), Screw; 3/8" X 1-1/4" 3/8 Unc-2a X 1 1/4 A17d Zn, Screw; 3/8" X 1-1/4", (3014), Screw; 3/8" X 1-1/4", (From Exhaust Manifold), Screw; 3/8" X 1-1/4", (3006), Screw; 3/8" X 1-1/4", Used With Furrower On 8-Row And 12-Row	10
19***04	Bolt; 3/8" X 5" (U/W 3.5" Loader Tubes), Bolt; 3/8" X 5" (Use With N187507), Bolt; 3/8" X 5", Bolt; 3/8"X5", Bolt; (B: (Xxxxxx- ) 4560-00*21; 4760-0079; 4960-0006) 3/8" X 5", Bolt, Bolt; 3/8" X 5", (Cab), Bolt; (B: (Xxxxxx- ) 4555-0100; 4755-0101; 4955-01*49) 3/8" X 5", Cap Screw; 3/8" X 5", Bolt; 3/8" X 5" (Use With Mg86634148), Bolt; (Use With 12h304 And 14h812), Bolt; 9.525 X 127 mm (3/8" X 5"), Bolt; 3/8" X 5", For 15'3" Harrow, Bolt; 3/8"X4-1/4", Bolt; (Use With 12h304 And 14h1076), Bolt; (C) 3/8" X 5", Bolt; 3/8" X 5", (Use With R58717), Bolt; 3/8" X 5" (Use With 14h812), Bolt; (A) 3/8" X 5", Bolt; 3/8" X 5", (Use With N187507), Bolt; 3/8" X 5", Use With N187507	2
24***39	Washer; (A: Use With Conversion From Niehoff To Motorola Alternator For 8450 Prior To Serial No. 00*86) 11/16" X 1-1/4" X 0.105", Washer, Washer; 11/16" X 1-1/4" X 0.105", (No Longer Required), Washer; .105" X 11/16" X 1-1/4", Washer; 11/16" X 1-1/4" X 0.105" (B), Washer; 11/16" X 1-1/4" X 0.105", (Sub For C1246r, This Application), Washer; 11/16" X 1-1/4" X 0.105" Rh, Washer; 11/16" X 1-1/4" X 0.105", 1 Per Wheel With More Than One Weight, Washer; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 11/16" X 1-1/4" X 0.105", Washer; 21/32"X1-1/4"X.120", Washer; 11/16" X 1-1/4" X .105", Washer; (C) 11/16" X 1-1/4" X 0.105", Washer; 17.475 X 31.750 X 2.667 mm (11/16" X 1-1/4" X 0.105"), Washer; 11/16" X 1-1/4" X 0.105" (C), Washer; (A: Not Used In U.S. And Canada) 11/16" X 1-1/4" X 0.105", Washer; 11/16" X 1-1/4" X 0.105", Washer; (B) 11/16" X 1-1/4" X 0.105", Washer; 11/16" X 1-1/4" X 0.105" 1 Per Wheel With More Than One Weight, Washer; (A: For 9650 (7001- ) & 9750 (7001- )) 11/16" X 1-1/4" X 0.105", Washer; (A: For 9650 ( -7000) & 9750 ( -70**00)) 11/16" X 1-1/4" X 0.105", Washer; (A) 11/16" X 1-1/4" X 0.105", Washer; X 11/16" X 1-1/4" X .105", Washer; 11/16" X 1-1/4" X 0.105", Used With Strap N240536 Only, Washer; 11/16" X 1-1/4" X 0.105", (714, 716), Washer; 11/16" X 1-1/4" X 0.105", (Sub For M42114), Washer; 11/16" X 1-1/4" X 0.105", (4, 8, 12, 16 Or 20 Quik-Tatch Weights), Washer; 11/16"X1-1/4"X.105", Washer; (B) 11/16" X 1-1/4" X 0.105"	0
AA***61	Hydraulic Hose; 3/4" X 4 801 mm (189") X 3/4", 9-Bottom, Hydraulic Hose; 3/4" X 4800 mm X 3/4", Hydraulic Hose; 1/2" X 4801 mm (189") X 3/4", Hydraulic Hose; 3/4" X 4800 mm (189") X 3/4" For 9-Bottom, Hydraulic Hose; (B) 3/4" X 189" X 3/4", Hydraulic Hose; 3/4" X 4800 mm (189") X 3/4" 3/4" X 171", Hydraulic Hose; Lgth= 4800mm, Hydraulic Hose; (A: 23 Ft Machine) 3/4" X 4800 mm X 3/4", Hydraulic Hose; 3/4" X 4 801 mm (189") X 3/4", Hydraulic Hose; (B) 3/4" X 4 801 mm (189") X 3/4", Hydraulic Hose; (B) 1/2" X 189", Hydraulic Hose; 3/4" X 4800 mm X 3/4" Long Hitch, Hydraulic Hose; (B) 3/4" X 4 801 mm X 3/4", Hydraulic Hose; 3/4" X 189", Hydraulic Hose; 3/4" X 4800 mm (189") X 3/4" (29'-6" Through 32'-4"), Hydraulic Hose; 3/4" X 189" (29'-6" Through 32'-4")	2

See all parts with full part numbers in Heavy Parts AI →

Drawbar (Tine Tooth Harrow Attachment) [B11]

John Deere : 685 - Plow, Chisel : Drawbar (Tine Tooth Harrow Attachment) [B11]

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2
19***20	Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer)	2
19***74	Cap Screw; (A) 1/2 X 2-3/4", Cap Screw; 1/2" X 2-3/4" (40'), Cap Screw; (B) 1/2" X 2-3/4", Cap Screw; 12.700 X 69.850 mm (1/2" X 2-3/4"), Cap Screw; 1/2" X 2-3/4", (Use With Fixed Drive Feeder House), Cap Screw; 1/2" X 2-3/4" (12 Used, Extra Heavy Duty Final Drive; 4 Used, Regular And Heavy Duty Final Drive), Cap Screw; 1/2x2-3/4", Cap Screw; 1/2" X 2-3/4", (Or), Cap Screw; 1/2" X 2-3/4" (Without Air Conditioning), Cap Screw; 1/2" X 2-3/4", (Ty2036), Cap Screw; 1/2 X 2-3/4", Cap Screw; 1/2" X 2-3/4" (Adjustable), Cap Screw; 1/2" X 2-3/4" (Use With 14h1040 And 12h301), Cap Screw; (C) 1/2" X 2-3/4", Cap Screw; 1/2" X 2-3/4, Cap Screw; 1/2" X 2-3/4", (Dual), Bolt, Cap Screw; 1/2"X 2 -3/4", Cap Screw; 1/2" X 2-3/4" (Without Electromagnetic Clutch), Cap Screw; (A) 1/2" X 2-3/4", Cap Screw; 1/2" X 2-3/4" Lh, Cap Screw; 1/2" X 2-3/4", Head Down, Cap Screw; (A) 1/2"X2-3/4", Cap Screw; 1/2" X 2-3/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 2-3/4" (Not Used With Electromagnetic Clutch), Cap Screw; 1/2" X 2-3/4", (Ru), Cap Screw; 1/2" X 2-3/4", (Use With An210207 On 8850 Tractor), Cap Screw; 1/2" X 2-3/4", Cap Screw; (A) (B) 1/2"X2-3/4", Cap Screw; 1/2" X 2-3/4" 11'5" - 26'5", Cap Screw; 1/2" X 2-3/4" 1/2" X 11/16" X 5/16", Cap Screw; 1/2"X2-3/4", Cap Screw; 1/2" X 2-3/4" (Use With 12h301), (Without Electromagnetic Clutch), Cap Screw; 1/2" X 2-3/4", (Rear Exhaust), Cap Screw; 1/2" X 2-3/4" Less Fenders, Cap Screw; 1/2" X 2-3/4" (Use With P54727 And P54726), Cap Screw; 1/2" X 2-3/4" (Use With Fixed Drive Feeder House), Cap Screw; 1/2" X 2-3/4" (Lh Side)	1
19***16	Cap Screw; (B: Four Weights) 5/8" X 6-1/2", Cap Screw; (B: Four Weight) 5/8" X 6-1/2", Cap Screw; (B: Four Weights) 5/8" X 6-1/2" (Hs, Sae 8), Cap Screw; (B) 5/8" X 6-1/2", (Hs, Sae 8), Cap Screw; 5/8" X 6-1/2", Cap Screw; 5/8" X 6-1/2", Cap Screw; 5/8" X 6-1/2" (Hs, Sae 8)	2

See all parts with full part numbers in Heavy Parts AI →

Flat Shovels [C08]

John Deere : 685 - Plow, Chisel : Flat Shovels [C08]

N1***90	Tine; 2" X 16" (Sub For Y917n), Tine; For Deep Banding Fertilizer, Tine; 51 mm X 406 mm (2" X 16"), Tine; 2" X 16", Tine; 51 mm X 406 mm (2" X 16") (Sub For Y917n), Tine; (A: Flat Shovels) 51 mm X 406 mm (2" X 16"), Tine; Chisel, 2" X 16", Tine; (D: Chisels) 51 mm X 406 mm (2" X 16") Chisel, Tine; Chisel, 51 mm X 406 mm (2" X 16") (Sub For Y917n), Tine; 51 mm X 406 mm (2" X 16") (Sub For Y970n And Y917n), Tine; Chisel, 51 mm X 406 mm (2" X 16") (Sub For Y917n, Y919n Or N130192), Tine; (B: Flat Shovels) 51 mm X 406 mm (2" X 16")	1
N1***89	Tine; (B: Flat Shovels) 51 mm X 356 mm (2" X 14"), Tine; (A: Flat Shovels) 51 mm X 356 mm (2" X 14"), Tine; 51 mm X 356 mm (2" X 14"), Tine; 51 mm X 356 mm (2" X 14") (Sub For Y916n), Tine; (D: Chisels) 51 mm X 356 mm (2" X 14") Chisel, Tine; Chisel, 51 mm X 356 mm (2" X 14") (Sub For Y916n, Y918n Or N130191), Tine; Chisel, 51 mm X 356 mm (2" X 14") (Sub For Y916n)	1

See all parts with full part numbers in Heavy Parts AI →

Heavy Duty Double Point Shovels [C07]

John Deere : 685 - Plow, Chisel : Heavy Duty Double Point Shovels [C07]

N1***93

Shovel; (A: Heavy Duty Double Point Shovels) 102 mm X 356 mm (4" X 14"), Shovel; Double-Pointed, 102 mm X 356 mm (4" X 14"), Shovel; 4" X 14-1/2" Double Point, Shovel; Double-Pointed 102 mm X 356 mm (4" X 14") (Sub For Y971n), Shovel; 4" X 14" (Sub For Y971n), Shovel; (E: Shovels) 102 mm X 356 mm (4" X 14") Heavy Duty, Shovel; 102 mm X 356 mm (4" X 14") Heavy Duty, Shovel; (A: Heavy Duty Double Point Shovels) Heavy Duty 102 mm X 356 mm (4" X 14"), Shovel; Heavy Duty, 102 mm X 356 mm (4" X 14") (Sub For Y971n), Shovel; Heavy Duty 102 mm X 356 mm (4" X 14"), Shovel; Double-Pointed, 102 mm X 356 mm (4" X 14") (Sub For Y971n), Shovel; Heavy Duty 102 mm X 356 mm (4" X 14") (Sub For Y971n)

See all parts with full part numbers in Heavy Parts AI →

Hitch Link [A07]

John Deere : 685 - Plow, Chisel : Hitch Link [A07]

24***59	Washer; 1-1/32" X 2-1/4" X 1/4", (4 Nominal), Washer; 1-1/32" X 2-1/4" X 1/4", Washer; 1-1/32" X 2-1/4" X 1/4", (For 1" Threads), Washer; 26.187 X 57.150 X 6.350 mm (1-1/32" X 2-1/4" X 1/4"), Washer, Washer; 1-1/32" X 2-1/4" X 1/4" (2 Used With N188346) (1 Used With N188331), Washer; 1-1/32" X 2-1/4" X 1/4", (2 Used With N188346) (1 Used With N188331), Washer; (A: Hardware For Aa25964) 1-1/32" X 2-1/4" X 1/4"	1
K4***18	Lock Nut; (A) 1", Lock Nut; 25.400 mm (1"), Lock Nut; For Safety Chain Attachment, Lock Nut; 2004 Drawn (Hd), Lock Nut; Flange, Lock Nut; (A: Used With Tow-Between Cart) Use With Aa65069 At Cart, Lock Nut; For Safety Chain Attachment (For 5-Section Machines Only), Lock Nut; 25.400 mm, Lock Nut; (5-Section Only) (1" Bolt Holes), Lock Nut; 25.400 mm (1"), Lock Nut; M8, Lock Nut; 25.400 mm (2 Used With N188346) (1 Used With N188331), Lock Nut; For Safety Chain Attachment (1" Bolt Holes), Lock Nut; 25,4 X 21,8 X 38,1 mm, Lock Nut; 1", Lock Nut, Lock Nut; (W) 1", Lock Nut; 1" Bolt Holes, For Safety Chain Attachment, Lock Nut; (For 1" Threads), Lock Nut; (B), Lock Nut; 1", (2 Used With N188346) (1 Used With N188331), Lock Nut; 1", Flange, Lock Nut; (B: 32'-6" To 41'-6") 25.400 mm, Lock Nut; (Sub For K40016, This Application), Lock Nut; 1" Bolt Holes	1
N1***01	Cap Screw, Cap Screw; 1" X 9-1/2"	1
N2***78	Link; (Sub For N186359)Cat Iv, Link, Link; Cat Iv, Link; (Sub For N186359), Link; (Use With N233327 ) (Sub For N186359), Link; (Sub For N186359) Cat Iv	1

See all parts with full part numbers in Heavy Parts AI →

Horizontal Fold Hinges [B01]

John Deere : 685 - Plow, Chisel : Horizontal Fold Hinges [B01]

11***55	Cotter Pin; 5/16" X 2", Use A3581r Or 11h255 (Sub 11m7056), Cotter Pin; (A: For 4 And 5 Bottoms Plow) 5/16" X 2", Cotter Pin, Cotter Pin; 5/16" X 2", (Included With Cylinder), Cotter Pin; 5/16" X 2", Cotter Pin; (B) 5/16" X 2", Cotter Pin; 5/16" X 2", (Sub For 11m7056), Cotter Pin; 5/16" X 2" (Included With Cylinder), Cotter Pin; 7.925 X 50.800 mm (5/16" X 2")	2
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	2
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	0
19***08	Cap Screw; 5/8" X 1-3/4", (Use With 12h294 And 14h1039), Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8), Cap Screw; 5/8" X 1-3/4" (Use With N101344), Cap Screw; (A: For 9650 (-69*00) & 9750 (-69*00)) 5/8" X 1-3/4", Cap Screw; 5/8"X1-3/4", Cap Screw; 5/8" X 1-3/4", For 3.0 M (10') Size., Cap Screw; 5/8" X1-3/4", Cap Screw; (D) 5/8" X 1-3/4", Cap Screw, Cap Screw; (C) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (Dual Power Lift), Cap Screw; Lh, 5/8" X 1-3/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models Only) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (7 Used, 347; 4 Used, 467), Cap Screw; 5/8" X 1-3/4", For 445, Cap Screw; (A) 5/8"X1-3/4", Cap Screw; 5/8" X 1-3/4", Idler Assembly. To Frame, Cap Screw; 5/8" X 1-3/4" Front, Low, Cap Screw; 5/8"X1 3/4", Cap Screw; 5/8" X 1-3/4", (656), Cap Screw; 5/8" X 1-3/4", (Used On 4520 And 4620), Cap Screw; 5/8" X 1-3/4", Cap Screw; (A) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (On Base Unit), Bolt, Cap Screw; (N: 10 Foot Main Frame Model Only) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (19 And 23-Foot Vertical Fold), Cap Screw; 5/8" X 1-3/4", 2 Used On N135553 With An132480 Or An132268 2 Used On N135552 With An132480 Or An132268, Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (Regular), Cap Screw; 5/8" X 1-3/4", For 465, Cap Screw; 5/8" X 1-3/4", For 850, Cap Screw; (C), Cap Screw; (B) 5/8" X 1-3/4", Cap Screw; Lh, 5/8"X1-3/4", Cap Screw; 5/8" X 1-3/4", For 4 648 mm (15') Harrow, Cap Screw; 5/8" X 1-3/4" R.H. Thread, Cap Screw; 5/8" X 1-3/4", (Sub For T22648 And 14h1039), Cap Screw; 5/8" X 1-3/4", (4020 Tractors)(4884)	4

See all parts with full part numbers in Heavy Parts AI →

Hose Supports [B25]

John Deere : 685 - Plow, Chisel : Hose Supports [B25]

08***09	Cap Screw; 3/8" X 7-1/2", Cap Screw; 3/8" X 7-1/2" (Use With R46577), Cap Screw; 3/8" X 7-1/2", (Use With R46577), Cap Screw; 3/8" X 7-1/2" Rigid Or 6" Tube, Cap Screw; (Use With R46577)	2
14***26	Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2"	4
19***33	Cap Screw; 3/8" X 2-1/2", (2 Used Power Shift) (4 Used Syncro-Range), Cap Screw; 3/8" X 2-1/2", Codes 2101 And 2103, Cap Screw; 3/8" X 2-1/2" (11'5" - 15'0"), Cap Screw; 3/8"X2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With R100676 Only), Cap Screw; 3/8" X 2-1/2", (Sub For Gf24615) For 760, Cap Screw; 3/8" X 2-1/2", (Use With R82180) Code 2501 And 2503, Cap Screw; (B: (Xxxxxx- ) 4650-00*66; 4850-0002 (Pst)) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With R90331) Code 2311(Tf), Cap Screw; 3/8" X 2-1/2", (Ru), Cap Screw; (B) 3/8" X 2-1/2", (Rear Outside Corners), Cap Screw; 3/8" X 2-1/2" (Use With N10215), Cap Screw; 9.525 X 63.500 mm, Cap Screw; 3/8" X 2-1/2", (Use With R90561) Code 2311(Af, Af001), Cap Screw; (A: W/O Sound-Gard Body) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" Lh, Cap Screw; 3/8" X 2-1/2" (Use With 12h304 And 14h812), Bolt, Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/8"X2-1/2", Cap Screw; 3/8" X 2-1/2" 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" (Use Without Spacer), Cap Screw; 3/8" X 2-1/2", Hex Head, Cap Screw; 3/8"X2 1/2", Cap Screw; 3/8" X 2-1/2", (Ha-G, Ha-L, Hb-G, Hb-L, Hc-G, Hd-G), Cap Screw; 3/8" X 2-1/2", (Use With R82180), Cap Screw, Cap Screw; 3/8" X 2-1/2", (Use With Ar91662), Cap Screw; 3/8" X 2-1/2" (Use With Re30685), Cap Screw; (B: ( -Xxxxxx) 4250-0095; 4450-01*85) 3/8" X 2-1/2" (Sgb), Cap Screw; 3/8" X 2-1/2", Code 2101 And 2103, Cap Screw; 3/8"X2-1/2"(Ou), Cap Screw; 3/8" X 2-1/2", (Use With Re30685), Cap Screw; 3/8" X 2-1/2", (Use With R100676 Or R82180 And R90561), Cap Screw; 3/8" X 2-1/2", (Use With Ah127730), Cap Screw; 3/8" X 2-1/2" (Use With 14h812), Cap Screw; (A: W/O Sgb) 3/8" X 2-1/2", Cap Screw; (B) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", Used On Beet Planter, Cap Screw; 9.525 X 63.500 mm (3/8" X 2-1/2"), Cap Screw; 3/8" X 2-1/2", Code 2107 And 2108, Cap Screw; (A) 3/8" X 2-1/2", Cap Screw; 3/8"X2-1/2" Unc, Cap Screw; 3/8"X2-1/2" (Sub For 19h268 Appl), Cap Screw; 3/8"X2-1/8" Unc, Cap Screw; 3/8"X2-1/2" (Ou), Cap Screw; 3/8" X 2-1/2", Code 2314 (Af Only) (Fan To R82180), Cap Screw; 3/8"X2-1/2"Unc	1
24***05	Washer; 13/32" X 13/16" X 0.065" (Use With Skid Plate), Washer; (E: (Xxxxxx- ) 4050-00*07; 4250-0182; 4450-0230) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Sub For Mg272311), Washer; 13/32" X 13/16" X 0.065", (10 Used, Variable Drive; 16 Used, Long), Washer; 13/32" X 13/16" X 0.065", (16.5l X 16.1 Tires), Washer; 13/32" X 13/16" X 0.065" (5 Used, Belt Drive; 7 Used, Hydrostatic Drive), Washer; 13/32" X 13/16" X 0.065", (Level Land), Washer; 11/32"X13/16"X0.06", Washer; (A: Floor To Control Support) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Appl), Washer; 13/32" X 13/16" X 0.065" (2 Used (A)) (4 Used (B)), Washer; 13/32" X 13/16" X 0.065" 13/32" X 13/16" X .060", Washer; Use With E52386, Washer; 13/32" X 13/16" X 0.060", Washer; (C) 13/32"X1".060", Washer; 13/32" X 13/16" X 0.065" To Secure Battery Cables To Frame, Washer; 13/32" X 13/16" X 0.065" (Rh Side), Washer; 13/32" X 13/16" X 0.065" 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Sidehill), Washer; 13/32" X 13/16" X 0.065", (Code 6403), Washer; 13/32" X 13/16" X 0.60", Washer; (A: Quad-Range Transmission) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Use With Re28954 Or Re37689), Washer; 13/32" X 13/16" X 0.065" (Use With Skid Plates), Washer; (A) 13/32" X 13/16" X 0.065", (Sub For T17444), Washer; X X (A), Washer; 13/32" X 13/16" X 0.065" (218, 220, 222, 224 And 230) (Use With H95175), Washer; 13/32" X 13/16" X 0.065" (Appl), Washer; 13/32" X 13/16" X 0.065", (675b) (Sub For Mg87016), Washer; 13/32" X 13/16" X 0.065" (854a,6264-; 1253a,6212-), Washer; 13/32" X 13/16" X 0.065" (Gasoline), Washer; (A) 13/32" X 13/16" X 0.065", (Sub For Et10702), Washer; 13/32"X13/16"X.060, Washer; 13/32" X 13/16" X 0.065", Washer; (E), Washer; (A), Washer; 13/32" X 13/16" X 0.065" (Use With R110147), Washer; (A: For 9650 Cts Combine (6910- )) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Dn-02), Washer; Ar, 13/32" X 13/16" X 0.6", Washer; 13/32" X 13/16" X 0.065" (8 Used, "In Position"; 7 Used, "Out Position"), Washer; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 13/32" X 13/16" X 0.065", Washer; 3/8"X3/4".060", Washer; 13/32" X 13/16" X 0.065" Lh, Washer; 10.312 X 20.625 X 1.651 mm (13/32" X 13/16" X 0.065"), Washer; 13/32" X 13/16" X 0.065", (Use With 19h2284), Washer; 13/32" X 13/16" X .060", Washer; (A) 13/32"X13/16"X0.065", Washer; Grounding Straps To Frame, Washer; 13/32" X 13/16" X 0.065" (Tether), Washer; (A: W/O Sound-Gard Body) 13/32" X 13/16" X 0.065", Washer; 13/32x13/16"X.060", Washer; 13/32" X 13/16" X 0.065" (No Longer Required), Washer; 13/32" X 13/16" X 0.065" (A), Washer; 13/32" X 13/16" X 0.065" Rh, Washer; 13/32" X 13/16" X 0.065" (Sgb), Washer; (A: Not Used In U.S. And Canada) 13/32" X 13/16" X 0.065" (Use With Al27269), Washer; 13/32" X 13/16" X 0.065" (918, 920, 922, 924, 925 And 930) (Use With H129024), Washer; 13/32" X 13/16" X 0.065" (Use With 19h2284), Washer; 13/32" X 13/16" X 0.065", (Less Cab) (3 Used With Cab), Washer; 13/32"X13/16"X0.065", Washer; 13/32" X 13/16" X 0.065", (Sub For C744dn), Washer; 13/32" X 13/16" X 0.065", (4 Or Less Used), Washer; 13/32" X 13/16" X 0.065", (Use With T142647), Washer; 13/32" X 13/16" X 0.065", (Alternator To Dash), Washer; 13/32" X 13/16" X 0.065", (Option 3101, 3102, 3103), Washer; 13/32"X13/16"X.060", Washer; 13/32' X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Use With 19h2284 And 19h1732), Washer; 13/32" X 13/16" X 0.065", (Code 3503), Washer; (A) (B) (C) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065" (Belt Drive), Washer; (K: At100208 Linkage - No Longer Available (Includes At101913, At106687, C1067r, M84972, T100992,) 13/32" X 13/16" X 0.065", Washer; (B) 13/32"X13/16"X.060", Washer; (A) (B) (C) (D) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065" (4 Or Less), Washer; 13/32" X 13/16" X 0.065", (Use With Ah108840), Washer; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 13/32" X 13/16" X 0.065", Washer; 13/32"X13/16"X0,06", Washer; (A: For 9650 Combine (6907- ) Also Serial Nos. 6994, 6995, 6901, 6902 And 6905.) 13/32" X 13/16" X 0.065", Washer; 13/32"X3/16"X.060", Washer; 13/32" X 13/16" X 0.065", (Use With 19h1726), Washer; 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (2 Nominal), Washer; 13/32" X 13/16" X 0.065" (854a,-6263; 1253a,-6211), Washer; 13/32" X 13/16" X 0.065" (Qrt), Washer; 13/32" X 13/16" X 0.065", (Modified 5200 And 5400), Washer; 3/8"X3/4"X.060, Washer, Washer; X X 13/32" X 13/16" X .060", Washer; 13/32"X13/16"X0.60", Washer; (D: (Xxxxxx- ) 4050-0052; 4250-0191; 4450-0229) 13/32" X 13/16" X 0.065", Washer; 10.312 X 20.625 X 1.651 mm (13/32" X 13/16" X 0.065"), Washer; 13/32" X 13/16" X 0.065" Ar, Washer; 13/32" X 13/16" X 0.065" (5 Used-Belt Drive; 7 Used-Hydrostatic Drive), Washer; (A: ( -Xxxxxx) 7710-0027; 7810-0092) 13/32" X 13/16" X 0.065", Washer; (A) 13/32"X13/16"X.060", Washer; .060" X 13/32" X 13/16", Washer; 13/32" X 13/16" X 0.065" (Use With 19h1726), Washer; 13/32" X 13/16" X 0.065" Brazil Only, Washer; Ar, 13/32" X 13/16" X 0.120", Washer; (A) (B) 10.312 X 20.625 X 1.651 mm (13/32" X 13/16" X 0.065"), Washer; 13/32" X 13/16" X 0.065" (Sub For R57696), Washer; 13/32" X 13/16" X 0.065", (8 Used, "In Position"; 7 Used, "Out Position"), Washer; 3/8"X3/4"X.060", Washer; (B) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Use With R110147), Washer; 13/32"X13/16"X.065", Washer; 15/32"X1"X.060", Washer; 13/32" X 13/16" X 0.065" (Rh), Washer; 13/32" X 13/16" X .060, Washer; 13/32" X 13/16" X 0.065" (16.5 X 16) Tires, Washer; 13/32" X 13/16" X 0.065" (Nlr), Washer; 13/32" X 13/16" X 0.065", (Use With 19h2552), Washer; 13/32"X1-13/16"X.060", Washer; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 13/32" X 13/16" X 0.065", Washer; (A) 13/32" X 13/16" X .060", Washer; (A: W/O Sgb) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065" (14 Used, 18'; 18 Used, 20'), Washer; 13/32" X 13/16" X 0.065" (Use With Re71147 Or R129875), Washer; 13/32" X 13/16" X 0.065", (Not Required With E55662), Washer; 13/32"X1"X.060", Washer; 13/32" X 13/16" X 0.065", (Code 6401), Washer; 25/64"X7/8"X.060", Washer, Washer; (B: (Xxxxxx- )4560-0028;4760-0051;4960-0055) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Use With 19m7402), Washer; (A) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (20 Used, Variable Drive; 24 Used, Long), Washer; (A) 13/32x13/16"X0.065", Washer; (D), Washer; (A) (B) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.06", Ar, Washer; (A: Germany) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065" Rear, Lh, Washer; 13/32"X13/16", Washer; 13/32" X 13/16" X 0.065", (675) (Sub For Mg87016), Washer; 25/64"X7/8"X.075", Washer; 13/32"X13/16"X0.060", Washer; 13/32" X 13/16" X 0.065", Code 2805 And Code 2811, Washer; 13/32" X 13/16" X 0.065" (930 Flex Arg), Washer; (B: (Xxxxxx- ) Serial No. 8450-0049; 8650-0091) 13/32" X 13/16" X 0.065", Washer; (A: Not Used In U.S. And Canada) (C: (Xxxxxx- ) 4650-0120; 4850-0182) 13/32" X 13/16" X 0.065" (Use With Al27269), Washer; 13/32" X 13/16" X 0.065" (Use With 19m7402), Washer; (D: (Xxxxxx- ) 4050e-0062; 4250e-0179) 13/32" X 13/16" X 0.065" (Use With Al27269), Washer; 13/32" X13/16" X .060", Washer; (B: (Xxxxxx- )4755-0104;4955-01*25) 13/32" X 13/16" X 0.065", Washer; 13/32" X 13/16" X 0.065", (Sub For Mg87016), Washer; 13/32" X 13/16" X 0.065", (20 Used, Regular And Variable Drive; 24 Used, Long), Washer; 13/32" X 13/16" X 0.065" (11'5" - 15'0"), Washer; 13/32" X 13/16" X 0.065", (Sub For Gg400-32404), Washer; (C) 13/32" X 13/16" X 0.065", Washer; 10.312 X 20.625 X 1.651 mm, Washer; (B) 13/32"X13/16"X0.065", Washer; 13/32" X 13/16" X 0.065" (Diesel), Washer; 13/32" X 13/16" X 0.065", Code 2805, Washer; 13/32"X13/16"X.060" (Sub For 24h154), Washer; 13/32" X 13/16" X 0.065" Engine Driven Fans Only	3

See all parts with full part numbers in Heavy Parts AI →

Jack Stand [A08]

John Deere : 685 - Plow, Chisel : Jack Stand [A08]

AA***92	Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00*26; 7700-0020; 7800-01**50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650	1
N1***29	Pin; (Sub For Ac14488), Pin; Surtir Con Ap39650, Pin; (Sub For N133193, This Application), Pin; (Sub For Wp321502b91), Pin; 45 Ft, 53 Ft And 61 Ft, Pin; Furnish With Ap39650, Pin; 2-Unit Hitch, Pin, Pin; (Sub For Kk5866b) (This Application Only), Pin; (Sub For E54915), Pin; (Sub For Kk5866b, This Application), Pin; (Sub For Kk5866b), Pin; (Sub For E54915) Jack, Pin; (Sub For Kk5866b) (750) (This Application Only), Pin; (Use With An103655) (Sub For Kk5866b This Application Only), Pin; (Sub For Kk5866b) (700) (This Application Only), Pin; Jack Attaching	1
TY***20	Jack, Jack; (Sub Ty25751), Jack; (5000 Lbs.)	1

See all parts with full part numbers in Heavy Parts AI →

Low Crown Tru-Width™ Sweeps [C04]

John Deere : 685 - Plow, Chisel : Low Crown Tru-Width™ Sweeps [C04]

N1***54	Sweep; 406 mm (16") Low Crown, Sweep; (A: Wheatland Sweeps) 406 mm (16") Low-Crown, Tru-Width, Sweep; (D: Low Crown Tru-Width Sweeps) 406 mm (16"), Sweep; (C: Low Crown Tru-Width Sweeps) 406 mm (16"), Sweep; 406 mm (16")	1
N1***52	Sweep; 305 mm (12") Low-Crown, Sweep; (A: Wheatland Sweeps) 305 mm (12") Low-Crown, Tru-Width, Sweep; (D: Low Crown Tru-Width Sweeps) 305 mm (12"), Sweep; (C: Low Crown Tru-Width Sweeps) 305 mm (12"), Sweep; 305 mm (12")	1
N1***53	Sweep; 356 mm (14") Low Crown, Sweep; (C: Low Crown Tru-Width Sweeps) 356 mm (14"), Sweep; (D: Low Crown Tru-Width Sweeps) 356 mm (14"), Sweep; (A: Wheatland Sweeps) 356 mm (14") Low-Crown, Tru-Width, Sweep; 356 mm (14")	1

See all parts with full part numbers in Heavy Parts AI →

Low Crown Wheatland Sweeps [C02]

John Deere : 685 - Plow, Chisel : Low Crown Wheatland Sweeps [C02]

N1***77	Sweep; 406 mm (16"), Sweep; 16" (Sub For N130114), Sweep; Low-Crown 406 mm (16") (Sub For N130114), Sweep; Wheatland, Low Crown, 406 mm (16"), Sweep; (B: Low Crown Wheatland Sweeps) 406 mm (16"), Sweep; (A: Low Crown Wheatland Sweeps) 406 mm (16"), Sweep; (A: Wheatland Sweeps) 406 mm (16") Low-Crown, Sweep; L0w-Crowm, 406 mm (16") (Sub For N130114), Sweep; 16" Low-Crown, Sweep; Wheatland, Low Crown, 406 mm (16") (Sub For N130114)	1
N1***78	Sweep; Low-Crown, 457 mm (18") (Sub For N130115), Sweep; (A: Wheatland Sweeps) 457 mm (18") Low-Crown, Sweep; Low-Crown 457 mm (18") (Sub For N130115), Sweep; 18", Sweep; Wheatland, Low Crown, 457 mm (18"), Sweep; 18" (Sub For N130115), Sweep; (A: Low Crown Wheatland Sweeps) 457 mm (18"), Sweep; (B: Low Crown Wheatland Sweeps) 457 mm (18"), Sweep; 457 mm (18"), Sweep; Wheatland, Low Crown, 457 mm (18") (Sub For N130115)	1

See all parts with full part numbers in Heavy Parts AI →

Main Frame And Front Frame [A11]

John Deere : 685 - Plow, Chisel : Main Frame And Front Frame [A11]

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
19***12	Cap Screw; 5/8"X5-1/4", A=26,5mm, Cap Screw; (D) 5/8" X 5-1/4", Cap Screw; (B) 5/8" X 5-1/4", Cap Screw; (B) (C) 5/8" X 5-1/4", Cap Screw; (A) 5/8" X 5-1/4", Cap Screw; (C) 5/8" X 5-1/4", Cap Screw; 5/8"X5-1/4", Cap Screw; 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4", (For Use With 5 Or 6 Levers), Cap Screw; 5/8" X 5-1/4", (12-15 Ft., 16-20 Ft.)	8
AN***20	Main Frame	1
AN***68	Frame; Front Extension	1

See all parts with full part numbers in Heavy Parts AI →

Main Frame Rockshaft Cylinder Anchor [A19]

John Deere : 685 - Plow, Chisel : Main Frame Rockshaft Cylinder Anchor [A19]

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	4
19***24	Cap Screw; 5/8" X 2-1/4", Use When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" R.H. Side Only, Cap Screw; 5/8" X 2-1/4", Required To Connect Unit To Parallel Arms, Cap Screw; 5/8 X 21/2-In., Cap Screw, Cap Screw; 5/8" X 2-1/4", (Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Front Axle), Cap Screw; 5/8" X 2-1/4" (2940, 3030, 3040, 3130, 3140 (37*06-)) (2950, 2955, 3050, 3350), Cap Screw; 5/8" X 2-1/4", Use With N212983 When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Use With Extension, Cap Screw; 5/8" X 2-1/4", (Sub For 19h1734) This Application Only, Cap Screw; (D) 5/8" X 2-1/4", Cap Screw; (B) 5/8" X 2-1/4", Cap Screw; 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Use With 12h294), Cap Screw; (H: Also Use On 4050e And 4250e) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Rh Side Only, Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4", (Used With Wheel Spacers), Bolt, Cap Screw; (C) (G) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Used With Sheel Spacers), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70**00)) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Wing Frame Only, Cap Screw; 5/8" X 2-1/4", Rear Position - 530, 630, 520, 50 Or 60 Tractors; Front Position - 730, 720, Or 70 Tractors., Cap Screw; 5/8" X 2-1/4", (Use When Hitch Is Lowered), Cap Screw; (C) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Planetary Final Drive), Cap Screw; 5/8" X 2-1/4" (To Front Axle Support), Cap Screw; 5/8" X 2-1/4" (Used With Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Cylinder Block), Cap Screw; 5/8" X 2-1/4" (To Cylinder Block), . Bolt, Cap Screw; 15.875 X 57.150 mm	4
24***76	Washer; 1-5/16" X 2-1/2" X 0.149", 36' And 42', Washer; (A: 40 Ft Drill) (B: 42 Ft Drill) 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149" 36 Ft And 42 Ft, Washer; 1-5/16" X 2-1/2" X 0.149" 30 Ft; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149", (For 21 Foot Machine), Washer; 1-5/16" X 2-1/2" X 0.149" 36 Ft And 42 Ft; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149" 30 Ft, Washer; 1-5/16" X 2-1/2" X 0.149", (20 Used On 21-Foot, 16 Used On 28, 31 And 41 -Foot), Washer; 1-5/16" X 2-1/2" X 0.149", (21-Foot), Washer; 1-5/16" X 2-1/2" X 0.149", 30'	2
24***68	Washer; 21/32" X 1-5/16" X 0.090", 9-Inch Only, Washer; 21/32" X 1-5/16" X 0.090", (On Base Unit), Washer; 21/32" X 1-5/16" X 0.090", Either Side Of Sheave For Alignment, Washer; 21/32" X 1-5/16" X 0.090", For 790 Rear, Washer; 21/32" X 1-5/16" X 0.090", (8 Nominal), Washer; 21/32" X 1-5/16" X 0.090", 8-Row Wide, Washer; (A: Dubuque (To) Esn -74*89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; (A: Dubuque (T0) Esn -7489) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Washer; (A) 21/32"X1-5/16"X.090", Washer; .090" X 21/32" X 15/16", Washer; 21/32" X 1-5/16" X 0.090" 3 Each Maximum, Used On E93102, Washer; 21/32" X 1-5/16" X 0.090", (Sub For E14416, This Application), Washer; 21/32" X 1-5/16" X 0.090" 21/32" X 1-5/16" X 0.090", Washer; 21/32"X1-1/16", Washer; 21/32" X 1-5/16" X 0.090", 12-Row Narrow, Washer; (B) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X .090", Washer; 21/32" X 1-5/16" X 0.090", Rear, For 79, Washer; 21/32x1-1/16", Washer; 21/32" X 1-5/16" X 0.090", (Use With 08h4073), Washer; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; 16.662 X 33.325 X 2.286 mm (21/32" X 1-5/16" X 0.090"), Washer; (A) (B) (C) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", R.H., Washer; 21/32" X 1-5/16" X 0.090", (Rs), Washer; 21/32" X 1-5/16" X 0.090", 230 mm (9") Only, Washer; .090 X 21/32 X 1-5/16zn, Washer; 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Sub For E14416), Washer; 21/32" X 1-5/16" X 0.090", (203 cm-259 cm (80"-102") Axle), Washer; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Sub For Mg87365), Washer; 21/32" X 1-5/16" X 0.090", (No Longer Available), Washer; 21/32" X 1-5/16" X 0.090" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922-7 Used; 925-8 Used; 930-10 Used; And 930 Flex Arg-1 Used), Washer; (C) 21/32" X 1-5/16" X 0.090", Washer; (E) (A) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" (8 Nominal), Washer; (A: Outer Wing Caster Wheel Spring Brake For 52 Ft Machine Only.) 21/32" X 1-5/16" X 0.090", Washer; 21/32"X1-5/16"X.090", Washer; 16.662 X 33.325 X 2.286 mm, Washer; 21/32" X 1-5/16" X 0.090", 8-Row Wide And 10-Row Narrow, Washer; 21/32" X 1-5/16" X 0.090" 5/8", (Sub For Mg87365), Washer; 21/32" X 1-5/16" X 0.090" (Sub For E14416), Washer; (A) (C) 21/32" X 1-5/16" X 0.090", Washer; (A) 21/32" X 1-5/16" X 0.090", (8 Nominal), Washer; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 21/32" X 1-5/16" X 0.090", Washer; (A) (D) (E) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" R.H., Washer; 21/32" X 1-5/16" X 0.090" 8-Row, 36-, 38- And 40-In.; 10-Row, 30-In., Washer; (B: Dubuque (T0) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Not Included In Kit) (Sub For Mg87365), Washer; (B: Dubuque (To) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; (B: Dubuque (To) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Use Without Rops), Washer; (B: Dubuque (To) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" 15 Ft, Washer; (D) 21/32" X 1-5/16" X 0.090", Washer; (B: Dubuque (T0) Esn 74**90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; (D) (E) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Without Rops), Washer; (B) (C) (D) 21/32" X 1-5/16" X 0.090", Washer; (A) (B) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-3/8" X .105", Washer, Washer; 21/32" X 1-5/16" X 0.090" 3 Max On Each Tooth Bar, Washers Not Needed W/Longer Boss, Washer; (A) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090"	2

See all parts with full part numbers in Heavy Parts AI →

Mainframe Rockshaft [A18]

John Deere : 685 - Plow, Chisel : Mainframe Rockshaft [A18]

08***10	Bolt; (D: 12r38) 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (8 X 10 Frame), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Use With 8”X10” Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12") 8, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2", Bolt; 5/8"X12-1/2", Bolt; (A) 8, (5/8"X12"), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), 8"X10" Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8 (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8.(5/8"X12"), Bolt; 5/8" X 12-1/2", Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, Bolt; (D) (E) 5/8" X 12-1/2", Bolt; 5/8" X 12-1/2" U/W 8 X 10 Tube (Hs, Sae 8), Bolt; 5/8" X 12-1/2" Use With 8 X 10 Tube, (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (U/W 8 X 10) Tube (Hs, Sae 8)	10
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	10
24***76	Washer; 1-5/16" X 2-1/2" X 0.149", 36' And 42', Washer; (A: 40 Ft Drill) (B: 42 Ft Drill) 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149" 36 Ft And 42 Ft, Washer; 1-5/16" X 2-1/2" X 0.149" 30 Ft; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149", (For 21 Foot Machine), Washer; 1-5/16" X 2-1/2" X 0.149" 36 Ft And 42 Ft; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149" 30 Ft, Washer; 1-5/16" X 2-1/2" X 0.149", (20 Used On 21-Foot, 16 Used On 28, 31 And 41 -Foot), Washer; 1-5/16" X 2-1/2" X 0.149", (21-Foot), Washer; 1-5/16" X 2-1/2" X 0.149", 30'	4
A5***92	Bushing; 45 Ft, 53 Ft And 61 Ft, Bushing; For 1-1/4" Pin, 41', Bushing, Bushing; (1-1/4" Pin), Bushing; 1-1/4" I.D., Bushing; 57' And 61', Bushing; For 1-1/4" Pin, Bushing; 1-1/4" I.D. 41', Bushing; 1.502" X 1.525" X 1"	2

See all parts with full part numbers in Heavy Parts AI →

Medium Crown Tru-Width™ Sweeps [C05]

John Deere : 685 - Plow, Chisel : Medium Crown Tru-Width™ Sweeps [C05]

N1***38	Sweep; (D: Medium Crown Tru-Width Sweeps) 457 mm (18"), Sweep; (E: Medium Crown Tru-Width Sweeps) 457 mm (18"), Sweep; Tru-Widthru-Width, Sweep; 458 mm (18") Tru-Width, Sweep; (A: Wheatland Sweeps) 457 mm (18") Tru-Width, (Wide Wing), Sweep; 457 mm (18")	1
N1***46	Sweep; (A: Wheatland Sweeps) 305 mm (12") Tru-Width, (Narrow Wing), Sweep; (E: Medium Crown Tru-Width Sweeps) 305 mm (12") (Narrow Wing), Sweep; (D: Medium Crown Tru-Width Sweeps) 305 mm (12") (Narrow Wing), Sweep; 305 mm (12") (Narrow Wing)	1
N1***37	Sweep; (D: Medium Crown Tru-Width Sweeps) 406 mm (16"), Sweep; 408 mm (16") Tru-Width, Sweep, Sweep; (E: Medium Crown Tru-Width Sweeps) 406 mm (16"), Sweep; 406 mm (16"), Sweep; (A: Wheatland Sweeps) 406 mm (16") Tru-Width, (Wide Wing)	1
N1***35	Sweep; 305 mm (12") (Wide Wing), Sweep; 12" Med-Crown Tru-Width Wheatland Sweep, Sweep; 305 mm (12") Tru-Width, Sweep; (12") Tru-Width, Sweep; (D: Medium Crown Tru-Width Sweeps) 305 mm (12") (Wide Wing), Sweep; (A: Wheatland Sweeps) 305 mm (12") Tru-Width, (Wide Wing), Sweep; (E: Medium Crown Tru-Width Sweeps) 305 mm (12") (Wide Wing)	1

See all parts with full part numbers in Heavy Parts AI →

Medium Crown Wheatland Sweeps [C03]

John Deere : 685 - Plow, Chisel : Medium Crown Wheatland Sweeps [C03]

N1***84	Sweep; (A: Wheatland Sweeps) 457 mm (18"), Sweep; 457 mm (18") (Sub For N130108), Sweep; 457 mm (18") Regular Wheatland, Sweep; Wheatland, 457 mm (18"), Sweep; 458 mm (18") Wheatland, Sweep; (C: Medium Crown Wheatland Sweeps) 457 mm (18"), Sweep; 18" (Sub For N130108), Sweep; (B: Medium Crown Wheatland Sweeps) 457 mm (18"), Sweep; Wheatland, 457 mm (18") (Sub For N130108), Sweep; 457 mm (18")	1
N1***85	Sweep; 20" (Sub For N130109), Sweep; (C: Medium Crown Wheatland Sweeps) 508 mm (20"), Sweep; Wheatland, 508 mm (20"), Sweep; 508 mm (20") (Sub For N130109), Sweep; (A: Wheatland Sweeps) 508 mm (20"), Sweep; 508 mm (20"), Sweep; (B: Medium Crown Wheatland Sweeps) 508 mm (20"), Sweep; Wheatland, 508 mm (20") (Sub For N130109)	1
N1***79	Sweep; (B: Medium Crown Wheatland Sweeps) 203 mm (8"), Sweep; (C: Medium Crown Wheatland Sweeps) 203 mm (8"), Sweep; Wheatland, 203 mm (8"), Sweep; 203 mm (8") (Sub For Y953n), Sweep; (A: Wheatland Sweeps) 203 mm (8"), Sweep; 203 mm (8"), Sweep; 8" (Sub For Y953n), Sweep; Wheatland, 203 mm (8") (Sub For Y953n)	1
N1***80	Sweep; Wheatland, 254 mm (10") (Sub For Y954n), Sweep; 10" (Sub For Y954n), Sweep; 254 mm (10") (Sub For Y954n), Sweep; Wheatland, 254 mm (10"), Sweep; (C: Medium Crown Wheatland Sweeps) 254 mm (10"), Sweep; (A: Wheatland Sweeps) 254 mm (10"), Sweep; (B: Medium Crown Wheatland Sweeps) 254 mm (10"), Sweep; 254 mm (10")	1

See all parts with full part numbers in Heavy Parts AI →

Over-Center Fold Hinges And Stop [B03]

John Deere : 685 - Plow, Chisel : Over-Center Fold Hinges And Stop [B03]

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	14
19***23	Cap Screw; 5/8"X5-1/2", Cap Screw; 5/8" X 5-1/2" (For R64100), Cap Screw; 5/8" X 5-1/2" (For 25 And 27-Foot Only), Cap Screw; (B) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (4 Used, 47 Thru 51-Foot Machine), Cap Screw; Low, 5/8"X5-1/2", Cap Screw; 5/8" X 5-1/2" (Use With Mechanical Depth Control), Cap Screw; 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Sub For T20089 And 19h2351, This Application), Cap Screw; (A: Narrow) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Use With N138383), Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", Bwa Only, Cap Screw; Low, 5/8" X 5-1/2", Cap Screw; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" X 5-1/2" (Sub For 19h3174, 19m8019), Cap Screw; (C) 5/8" X 5-1/2", Cap Screw; (A: Main Frame, Wingframe (3 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer) 5/8" X 5-1/2", Cap Screw; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (For 4" X 4" Frame), Cap Screw; 5/8" X 5-1/2" (For 23 Thru 27-Foot Machines), Cap Screw; 5/8" X 5-1/2", (Used On 24-Ft And 30-Ft Models), Cap Screw; (D) 5/8" X 5-1/2", Cap Screw; (A) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (With Drawbar Offset-Front Hole), Cap Screw; (A) (B) (C) 5/8" X 5-1/2", On Right Rear Frame, Outer End, Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Used On 24 And 30 Ft.), Cap Screw; 15.875 X 139.700 mm (5/8" X 5-1/2"), Cap Screw; 5/8" X 5-1/2", (For 23' Thru 28'4" Machines), Cap Screw; (D) 5/8" X 5-1/2", On Right Rear Frame, Outer End, Cap Screw; 5/8" X 5-1/2", For 4" X 4" (102 X 102 mm) Frame (Lower), Cap Screw; 5/8" X 5-1/2", Lower Holes, Cap Screw; 5/8" X 5-1/2" Wide, Cap Screw; (B) (C) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 5-1/2", Lower Holes (For 6359d Engine), Cap Screw; 5/8" X 5-1/2", (For 102 X 102 mm (4" X 4") Frame), Cap Screw; (A: 27 Ft - 9 In) (B: 30 Ft - 9 In (Illustrated)) 5/8" X 5-1/2", Cap Screw; (E) 5/8" X 5-1/2"	18
19***25	Cap Screw; 3/4" X 6-1/2", Hex. Hd., Cap Screw; (D) 3/4" X 6-1/2", (Sub For R53020) (Also Order 14h1058), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8) (12'-2" Through 15'-0"), Cap Screw; 3/4" X 6-1/2" (5 X 7 Frame), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8) (12'2" Through 15'0"), Cap Screw; 3/4" X 6-1/2", Hs, Sae 8, Cap Screw; 19.050 X 165.100 mm (3/4" X 6-1/2") (Hs, Sae 8), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8), Cap Screw; (D) 3/4" X 6-1/2", (Sub For R53020), Cap Screw; 3/4" X 6-1/2", (Sub For R53020), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8) Wide Axle, (Sub For R53020), Cap Screw; 3/4" X 6-1/2" Hs=10.9, Sae 8, Cap Screw; (Sub For R53020), Cap Screw; (C) 3/4" X 6-1/2", (Sub For R53020), Cap Screw; 3/4" X 6-1/2" (For 5 X 7 Frame), Cap Screw; 3/4"X6-1/2", Cap Screw; 19.050 X 165.100 mm (3/4" X 6-1/2"), Cap Screw; (D: For 5 X 7 Frame) 3/4" X 6-1/2", Cap Screw; 3/4" X 6-1/2", Cap Screw; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4" X 6-1/2" Hs, Sae 8, Cap Screw; 3/4" X 6-1/2", Hs Sae 8, Cap Screw; (A) 3/4" X 6-1/2", Cap Screw; (C: ( -Xxxxxx) 4650-0192; 4850-0152) 3/4" X 6-1/2" Hs 8 Sae, Cap Screw; (B: Wide) 3/4" X 6-1/2" (Hs, Sae 8), Cap Screw; (D: Wide) (F: Coarse Thread) 3/4" X 6-1/2" Hs, Sae 8, Cap Screw; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4" X 6-1/2" Hs, Sae 8, Cap Screw; 3/4" X 6-1/2" Hs 8 Sae	2
24***76	Washer; 1-5/16" X 2-1/2" X 0.149", 36' And 42', Washer; (A: 40 Ft Drill) (B: 42 Ft Drill) 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149" 36 Ft And 42 Ft, Washer; 1-5/16" X 2-1/2" X 0.149" 30 Ft; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149", (For 21 Foot Machine), Washer; 1-5/16" X 2-1/2" X 0.149" 36 Ft And 42 Ft; 1-5/16" X 2-1/2" X 0.149", Washer; 1-5/16" X 2-1/2" X 0.149" 30 Ft, Washer; 1-5/16" X 2-1/2" X 0.149", (20 Used On 21-Foot, 16 Used On 28, 31 And 41 -Foot), Washer; 1-5/16" X 2-1/2" X 0.149", (21-Foot), Washer; 1-5/16" X 2-1/2" X 0.149", 30'	8

See all parts with full part numbers in Heavy Parts AI →

Over-Center Fold Hinges [A17]

John Deere : 685 - Plow, Chisel : Over-Center Fold Hinges [A17]

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
19***28	Cap Screw; 5/8" X 4" 18'9" And 21'9", Cap Screw; 5/8" X 4", Cap Screw; 5/8"X4", Cap Screw; (R) 5/8" X 4", Cap Screw; 15.875 X 101.600 mm (5/8" X 4") Used Where Light Bracket Attaches, Cap Screw; (B) 5/8" X 4", Cap Screw; 5/8" X 4", (16 X 6 Disk) (8 X 12, 10 X 10 And 7 X 14 Hoe), Cap Screw; (D) 5/8" X 4", Cap Screw; 5/8" X 4" Use With 6" Spacing On S-Tine Models, Cap Screw; (B) 5/8" X 4", (Rear Flange To Flywheel Housing), Cap Screw; 5/8" X 4", (Rigid Models Only), Cap Screw; 5/8" X 4", Upper And Lower Holes (For 6359t Engine), Cap Screw; 5/8"X4, Cap Screw; (B) (C) (D) 5/8" X 4", Cap Screw; 5/8" X 4", (With Markers), Cap Screw; 5/8" X 4", No. 4 Grab Roll, Cap Screw; (B), Cap Screw; (A) 5/8" X 4", Cap Screw; (C) 5/8" X 4", Cap Screw; 5/8" X 4" Main Frame Front, Cap Screw; 5/8" X 4" (For Rigid Models Only), Cap Screw; 5/8"X4" W/Dual-Stage Clutch, Cap Screw; 5/8" X 4" (15'9"), Cap Screw; 5/8" X 4" (A), Cap Screw; 5/8" X 4", (7 X 14 Hoe)	4
19***69	Cap Screw; 5/8" X 3-1/2" 3-Section, Cap Screw; 5/8" X 3-1/2", Cap Screw; (A) 5/8" X 3-1/2", (Hs, Sae 8), Cap Screw; 5/8" X 3-1/2", R.H., Cap Screw; 5/8" X 3-1/2", (Hs, Sae 8), Cap Screw; (A) 5/8" X 3-1/2", Cap Screw; 15.875 X 88.900 mm (5/8" X 3-1/2"), Cap Screw; 5/8" X 3-1/2", Sae 8, Cap Screw; Hs, Sae 8, 5/8" X 3-1/2", Cap Screw; (A) 5/8"X3-1/2", Cap Screw; 5/8"X3-1/2", Cap Screw; 0,625" X 3,5", Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8) Main Frame Hinge, Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8), Cap Screw; (A: Two Weights) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", Main Frame Hinge, Cap Screw; (A: Two Weights) 5/8" X 3-1/2" (Hs, Sae 8), Cap Screw; 5/8" X 3-1/2", Hs, Sae 8, Cap Screw; 5/8" X 3-1/2" (Optional), Cap Screw; 5/8" X 3-1/2" R.H., Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8) (With Light Bracket), Cap Screw; 5/8" X 3-1/2" Install Using Loctite 271 & Primer Torque (Lub) 160 Lb-Ft (215 N-M)	0
19***44	Cap Screw; (A) 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Sae 8) Up, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4" Inner, Cap Screw, Cap Screw; 5/8" X 2-1/4" Hs, Sae 8, Cap Screw; 5/8" X 2-1/4" Hs=8 Sae, Cap Screw; (C) 5/8" X 2-1/4", Hs, Sae 8, Cap Screw; (J) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Sae 8) Up, Cap Screw; 5/8" X 2-1/4" (Rh Side), Cap Screw; 5/8" X 2-1/4", Up, Cap Screw; 5/8" X 2-1/4", Hs, Sae 8,, Cap Screw; 5/8" X 2-1/4" Hs 8 Sae, Cap Screw; 5/8" X 2-1/4", Hs, Sae 8, Cap Screw; 5/8"X2-1/4", Cap Screw; (C: Code 4402 Electronic Tach) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Hs, Sae 8) (Use With 18.4-38, 20.8-34 Or 23.1-30 Tires), Cap Screw; 5/8" X 2-1/4", (Code 1405)	4

See all parts with full part numbers in Heavy Parts AI →

Rigid Hitch [A09]

John Deere : 685 - Plow, Chisel : Rigid Hitch [A09]

14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	2
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	16
14***30	Nut; 7/8", (28, 31, 36 And 41-Foot), Nut; 7/8" (28-, 31- And 41-Foot), Nut; 7/8", Nut; 7/8" Jam, Nut; 7/8", Jam, Nut; 7/8", (For 28, 31 And 41-Foot Machines), Nut; 7/8", (Use With An210287), Nut; 7/8", (6 Bottoms Plow), Nut; 7/8", (28, 31 And 41-Foot), Nut; 7/8", (For 28 And 31 Foot Machines), Nut; 7/8" (For 28, 31 And 41) Foot Machines	4
19***08	Cap Screw; 5/8" X 1-3/4", (Use With 12h294 And 14h1039), Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8), Cap Screw; 5/8" X 1-3/4" (Use With N101344), Cap Screw; (A: For 9650 (-69*00) & 9750 (-69*00)) 5/8" X 1-3/4", Cap Screw; 5/8"X1-3/4", Cap Screw; 5/8" X 1-3/4", For 3.0 M (10') Size., Cap Screw; 5/8" X1-3/4", Cap Screw; (D) 5/8" X 1-3/4", Cap Screw, Cap Screw; (C) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (Dual Power Lift), Cap Screw; Lh, 5/8" X 1-3/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models Only) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (7 Used, 347; 4 Used, 467), Cap Screw; 5/8" X 1-3/4", For 445, Cap Screw; (A) 5/8"X1-3/4", Cap Screw; 5/8" X 1-3/4", Idler Assembly. To Frame, Cap Screw; 5/8" X 1-3/4" Front, Low, Cap Screw; 5/8"X1 3/4", Cap Screw; 5/8" X 1-3/4", (656), Cap Screw; 5/8" X 1-3/4", (Used On 4520 And 4620), Cap Screw; 5/8" X 1-3/4", Cap Screw; (A) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (On Base Unit), Bolt, Cap Screw; (N: 10 Foot Main Frame Model Only) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (19 And 23-Foot Vertical Fold), Cap Screw; 5/8" X 1-3/4", 2 Used On N135553 With An132480 Or An132268 2 Used On N135552 With An132480 Or An132268, Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4", (Regular), Cap Screw; 5/8" X 1-3/4", For 465, Cap Screw; 5/8" X 1-3/4", For 850, Cap Screw; (C), Cap Screw; (B) 5/8" X 1-3/4", Cap Screw; Lh, 5/8"X1-3/4", Cap Screw; 5/8" X 1-3/4", For 4 648 mm (15') Harrow, Cap Screw; 5/8" X 1-3/4" R.H. Thread, Cap Screw; 5/8" X 1-3/4", (Sub For T22648 And 14h1039), Cap Screw; 5/8" X 1-3/4", (4020 Tractors)(4884)	8

See all parts with full part numbers in Heavy Parts AI →

Safety Chain [A06]

John Deere : 685 - Plow, Chisel : Safety Chain [A06]

19***28	Cap Screw; 3/4" X 3", Cap Screw; 3/4" X 3", (Hs, Sae 8), Cap Screw; 3/4" X 3" (3/4" Bolt Holes), Cap Screw; 3/4" X 3", (Use With Re240723), Cap Screw; (X) 3/4" X 3", Cap Screw; 3/4" X 3" Hs 8 Sae, Cap Screw; (B: (Xxxxxx- ) Serial No. 8450-00*63; 8650-0078) (E: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4"X3", Cap Screw; 3/4" X 3", Caution, Cap Screw; 3/4" X 3" (5 X 7 Frame) (Safety Trip), Cap Screw; 3/4" X 3" On Chain Piler Outer Lugs, Cap Screw; 3/4" X 3", (Hs Sae 8), Cap Screw; 3/4" X 3" Hs=10.9, Sae 8, Cap Screw; 19.050 X 76.200 mm, Cap Screw; 3/4" X 3" (Safety Trip), Cap Screw; 3/4" X 3", Hs, Sae 8, Cap Screw; (B: 20, 000 Lb.) 3/4" X 3" (Hs, Sae 8) Rigid Hitch, Cap Screw; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4" X 3" Hs, Sae 8, Cap Screw; (B: (Xxxxxx- ) 4650-0164; 4850-0000) (C: ( -Xxxxxx) 4650-0192; 4850-0152) 3/4" X 3" Hs 8 Sae, Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4" X 3", (2-Joint Hookup), Cap Screw; 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4" X 3", Hs Sae 8, Cap Screw; (C: 2-Joint Hookup) 3/4" X 3", Cap Screw; 3/4" X 3" Rigid Hitch, Cap Screw; 3/4" X 3", (Sub For Ar35807), Cap Screw; 3/4" X 3" Hs=8 Sae, Cap Screw; (A) 3/4" X 3", Cap Screw; 3/4" X 3" (Hs, Sae 8) (Use With Shims), Cap Screw; 3/4" X 3" Hs Sae 8, Cap Screw; 3/4" X 3" (Hs, Sae 8), Cap Screw; (B: (Xxxxxx- ) 4250-0085; 4450-0170) (E: ( -Xxxxxx) 4250-0190; 4450-02*70) 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4" X 3", Hs Sae 8, Plated	1
24***03	Washer; 25/32" X 2" X 0.180" (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", (12'-2' Through 15'-0") (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", Washer; 25/32" X 2" X 0.180", (13'-10" Through 19'-10") (10,000 Lb Chain), Washer; 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180" 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180", (For 10,000 Lb Chain), Washer; 25/32" X 2" X 0.180" Tension, Washer; 25/32" X 2" X 0.180", (12 Used L.H.) (12 Used R.H.)	1
34***48	Spring Pin; 1/8" X 13/16", Used With 20,000 Lbs. Chain, Spring Pin; 1/8" X 13/16", (Use With 20,000 Lb Chain), Spring Pin; 1/8" X 13/16" (Use With Ar90579 Or Ar90583), Spring Pin; 1/8" X 13/16", Spring Pin; 1/8" X 13/16", Spring Pin; (B: 20, 000 Lb.) 1/8" X 13/16", Spring Pin, Spring Pin; (A) 1/8" X 13/16", Spring Pin; 1/8" X 13/16" (A), Spring Pin; 1/8" X 13/16", 6-Row Narrow W/Split Row, Spring Pin; 1/8" X 13/16" (Sub Z9785h), Spring Pin; 1/8"X13/16" (Sub For 34h42)	1
AR***79	Link Chain; (20,000 Lb.) Complete, Link Chain; (20, 000 Lb.), (Sub Ae58575, This Application), Link Chain; For Front Plow, 20,000 Lbs. Chain, Link Chain; 42 Links 9.5 mm (3/8") Dia Chain, Link Chain; 20, 000 Lbs (Sub Ae58575), Link Chain; 20,000 Lbs. (Tow-Behind Models), Link Chain; 20,000 Lbs, Link Chain; (Sub For Ar100279) (Sub Ae58575) Includes Items (A), Link Chain; (20, 000 Lb) (Sub Ae58575, This Application), Link Chain; 20,000 Lbs. Chain, Link Chain; (Sub For Ar100279 ) (Sub Ae58575)Includes Items (A), Link Chain; (B: 20, 000 Lb.) (Sub Ae58575), Link Chain; (B), Link Chain; (20,000 Lbs.) (Sub Ae58575, This Application), Link Chain; (20,000 Lb.) (Sub For Ar100279, R74594, R74595, R74596, R74597 And R69398), Link Chain; (Sub Ae58575, This Application), Link Chain; 20,000 Lb (Sub Ae58575, This Application), Link Chain, Link Chain; 20,000 Lb, Link Chain; Safety Chain 20, 000 Lbs., Link Chain; (20,000 Lb.), Link Chain; 42 Links, 9.5mm (3/8") Dia Chain, Link Chain; 6-Row Narrow W/Split Row; Includes Keys 17-23; 20,000 Lbs., Link Chain; (Sub Ae58575) Includes Items (A), Link Chain; 20, 000 Lbs (Sub Ae58575, This Application), Link Chain; 20,000 Lbs., Link Chain; 9.5 mm (3/8"), Link Chain; (Sub Ae71229), Link Chain; (20, Ooo Lb.) Multiple Drill Hitch, (Sub Ae58575, This Application), Link Chain; 42 Links, 9.5 mm (3/8") Dia Chain, Link Chain; Includes Keys 25-31; 20,000 Lbs, Link Chain; (Sub For Ar100279) (Sub Ae58575) Includes Items (A), 20,000 Lb, Link Chain; 42 Links 9.5mm (3/8") Dia Chain, Link Chain; 20,000 Lbs (Sub Ae58575, This Application)	1

See all parts with full part numbers in Heavy Parts AI →

Sequence Valve [B13]

John Deere : 685 - Plow, Chisel : Sequence Valve [B13]

19***20	Cap Screw; 1/4" X 2-1/2", Cap Screw; 1/4" X 2-1/2" Hs, Sae 8, Cap Screw; 1/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 1/4" X 2-1/2" (Hs, Sae 8) (Sub For Mg87845)	2
AN***29	Check Valve; Return Check	1
AN***30	Seal Kit; Contains Parts Marked (K)	1
AN***31	Plug; Internal Pilot	1

See all parts with full part numbers in Heavy Parts AI →

Single Point Depth Control [B05]

John Deere : 685 - Plow, Chisel : Single Point Depth Control [B05]

11***28	Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44*59, 5520: Sn -4500) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-0013), 5403 (-00*75).), Pin; 5 X 32 mm, (Sub For 11h218)	2
11***32	Cotter Pin; (C), Cotter Pin; 0.197" X 1.969", (M5 X 50 mm), Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm, (Integral Flail Shredder), Cotter Pin; 5 X 50 mm (213), Cotter Pin; 5 X 55 mm, Cotter Pin; 5 X 50 mm (222), Cotter Pin; 5 X 50 mm, (Sub H114001), Cotter Pin; 5 X 50 mm (Use With Comer Gearcase), Cotter Pin, Cotter Pin; 5 X 50 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5 X 50 mm, (Per Tooth Bar), Cotter Pin; 0.197" X 1.969", (Sub 11m7032), Cotter Pin; 0.197" X 1.969", Cotter Pin; (A) 5 X 50 mm, Cotter Pin; 5 X 50 mm (230), Cotter Pin; (A: High Speed (B)Fixed Speed) 5 X 50 mm, Cotter Pin; (A), Cotter Pin; 5x20mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (A), Cotter Pin; 5 X 50 mm, (Sub For 11h218), Cotter Pin; 5x50mm (Sub For 11h222), Cotter Pin; 5 X 50 mm, Per Tooth Bar, Cotter Pin; 5 X 50 mm, L.H., Cotter Pin; 5 X 50 mm, (Drawn Flail Shredder), Cotter Pin; 11 X 80 mm, Cotter Pin; 5 X 50 mm (220), Cotter Pin, Cotter Pin; (E: Drawn Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm (215), Cotter Pin; 5x55mm, Cotter Pin; 5 X 50 mm, Cotter Pin; 5 X 50 mm 5x50mm, Cotter Pin; 5 X 50 mm (216), Cotter Pin; 5 X 50 mm, (540 Rpm), Cotter Pin; 5x50mm (Sub For 11h218), Cotter Pin; 5 X 50 mm (Use With An163187), Cotter Pin; 5x50mm, Cotter Pin; 5 X 50, Cotter Pin; (A: Hi Speed) 5 X 50 mm, Cotter Pin; 5x50mm (Sub For 11h102), Cotter Pin; 5 X 50 mm (224), Cotter Pin; 5 X 50 mm (38"), Cotter Pin; (A) (B) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (4 Used,1217;5 Used,1219), Cotter Pin; (F: Integral Flail Shredder) 5 X 50 mm, Cotter Pin; 5 X 50 mm, (2 Used, 660,670) (1 Used, 671), Cotter Pin; 5 X 50 mm Incld In Tie Rod Group, Cotter Pin; 5 X 50 mm, (Sub For 11h210), Cotter Pin; 3/16" X 2", Cotter Pin; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 5 X 50 mm, Cotter Pin; (A: Hardware For Aa25964) 5 X 50 mm, Cotter Pin; 5 X 50 mm (0.197" X 1.969"), Cotter Pin; 3/16"X1-1/2", Cotter Pin; 5 X 50 mm, (Sub For 11h222), Cotter Pin; 5 X 50 mm, (1 Used Per Tooth Bar), Cotter Pin; 5 X 50 mm (Use With Axe12661), Cotter Pin; 5 X 50 mm, (Sub For T110420), Cotter Pin; 5 X 50 mm 2109, 2122, 2126, 2130, Cotter Pin; 5 X 50 mm (Sub For H75368), Cotter Pin; (A: High Speed) 5 X 50 mm, Cotter Pin; 5 X 50 mm, Each Additional Tooth Bar, Cotter Pin; 5 X 50mm, Cotter Pin; 5 X 50 mm, (1 Used-443, 444, 543; 2 Used-546, 642, 643, 644, 645, 842, 843, 844, 1243) (Not Required With Metric Shafts), Cotter Pin; X 5 X 50 mm (Sub For 11h218)	3
11***84	Cotter Pin; 5 X 25 mm, (Next To Shifter), Cotter Pin; 0.197" X 0.984", Cotter Pin; 5 X 25 mm, Cotter Pin; 0.197" X 0.984", (Next To Shifter Lever), Cotter Pin; (B: Next To Shifter) 5 X 25 mm, Cotter Pin; 5 X 25 mm (Shifter), Cotter Pin; (A) 5 X 25 mm, Cotter Pin, Cotter Pin; 5 X 25 mm, (Use With J18701), Cotter Pin; 5 X 25 mm, (Use With S2411m), Cotter Pin; 5 X 25 mm (Next To Shifter), Cotter Pin; (B) 5 X 25 mm, Cotter Pin; 5 X 25 mm, (Sub For 11h216), Cotter Pin; 5 X 25 mm (0.197" X 0.984"), Cotter Pin; 5 X 25 mm, 6-Row Narrow, Cotter Pin; 5 X 25 mm, 4-Row Narrow And 4-Row Wide	1
14***19	Nut; 7/8" Unc Slotted, Nut; 7/8", Nut; 7/8" 7/8" Slotted, Nut; 7/8" Slotted, Nut; 7/8", Slotted	1

See all parts with full part numbers in Heavy Parts AI →

Spring Trip Standard [B09]

John Deere : 685 - Plow, Chisel : Spring Trip Standard [B09]

10***36	Bolt; 1/2" X 2-1/4", (Hs Sae 8), Bolt; (B) (C) 0,5" X 2,25", Bolt, Bolt; 1/2" X 2-1/4", Hs Sae8, Bolt; 1/2" X 2-1/4" (Used With Sweeps), Bolt; (B: For Msl) 1/2" X 2-1/4", Bolt; (B) (C) M12,7 X 57,15, Bolt; (A) (B) 1/2" X 2-1/4", Bolt; 1/2" X 2-1/4", Hs Sae 8, (Sub For 10h1076), Bolt; 1/2" X 2-1/4", 2150mm, Bolt; 0,5" X 2,25", Bolt; 1/2" X 2-1/4" (Hs, Sae 8), Bolt; 1/2" X 2-1/4" (Hs, Sae 8) (Used With Sweeps), Bolt; 1/2" X 2-1/4", Hs Sae 8, Bolt; 1/2" X 2-1/4", Bolt; 1/2"X2-1/4", Bolt; (B) 0,5" X 2,25", Bolt; 12.700 X 57.150 mm, Bolt; (B: For Msl) (C: For Nsl) 1/2" X 2-1/4", Bolt; (B) M12,7 X 57,15, Bolt; 1/2" X 2-1/4" (For Use With Sweeps)	2
10***37	Bolt; 1/2"X2-1/2", Bolt; 1/2" X 2-1/2", N0. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", Hs Sae8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8), Bolt; (B) 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Hs, Sae 8) (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) Banding Boot, Bolt; 1/2" X 2-1/2", 3 Plow Bolt, Bolt; 1/2" X 2-1/2", (Hs Sae 8), Bolt; 1/2" X 2-1/2", Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (No. 3 Plow Bolt), Bolt; 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2", No. 3, Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Used With Chisels), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (Used With Chisels), Bolt; 1/2" X 2-1/2", (Hs, Sae 8), Bolt; 1/2" X 2-1/2", Hs Sae 8, Bolt; 1/2" X 2-1/2" No. 3 Plow Bolt (Hs, Sae 8), Bolt; 1/2" X 2-1/2", No. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", No.3 Plow Bolt, Bolt; 1/2" X 2-1/2" (For Use With Chisels), Bolt; 1/2" X 2-1/2", N0.3 Plow Bolt, Bolt; 12.700 X 63.500 mm (1/2" X 2-1/2")	2
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	1

See all parts with full part numbers in Heavy Parts AI →

Stabilizer Wheel Support (Lh Illustrated) [B02]

John Deere : 685 - Plow, Chisel : Stabilizer Wheel Support (Lh Illustrated) [B02]

03***99	Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)	4
11***30	Cotter Pin; (A: 24r20) (B: 31/32r15) 5 X 40 mm, Cotter Pin; (A: Main Frame) (B: Wing Frame) 5 X 40 mm, Cotter Pin; 0.197" X 1.575", Cotter Pin; (A: 5303 (-00*13), 5403 (-0075)) 5 X 40 mm, Cotter Pin; (Sub For Pt19056), Cotter Pin; 5x40mm (Sub For L36469), Cotter Pin; (A: 9550 (6901-) 9550sh (6901-)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (0.197" X 1.575"), Cotter Pin; 5x40mm, Cotter Pin; (A) 5 X 40 mm, Cotter Pin; 5 X 40 mm, (Sub 11m7073), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 5 X 40 mm, (Use With N60865), Cotter Pin; 5 X 40 mm (For Ah219841), Cotter Pin; 5 X 55 mm (Sub For 11m1405), Cotter Pin; (Sub For 11h218), Cotter Pin; 5 X 40 mm (912), Cotter Pin; (A) 5x40mm, Cotter Pin; (B) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, Cotter Pin; 5 X 40mm, Cotter Pin; (B: Part Of Ar109180 Adjustable Front Axle) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For Pt19056), Cotter Pin; 5 X 40 mm, (Sub For 11h218), Cotter Pin; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m1405), Cotter Pin, Cotter Pin; M5 X 40 Zn, Cotter Pin; 5/32"X1-1/2", Cotter Pin; (B: 12.5 Foot) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m7073, This Application), Cotter Pin; 5 X 45 mm, Cotter Pin; (A: Syncshuttle Transmission - 5420: Sn 4460-, 5520: Sn 45*01-) 5 X 40 mm, Cotter Pin; (A) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, (Sub For Mg87398), Cotter Pin; (B) 5x40mm, Cotter Pin; 5 X 40 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5x45mm	1
11***85	Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480"	1
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	4

See all parts with full part numbers in Heavy Parts AI →

Stub Bars [A16]

John Deere : 685 - Plow, Chisel : Stub Bars [A16]

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	4
19***33	Cap Screw; 5/8" X 3-1/2" Drawbar, Cap Screw; 5/8" X 3-1/2", Auxiliary Hydraulic System, Cap Screw; 5/8" X 3-1/2" Main Frame Hinge, Cap Screw; 5/8" X 3-1/2", (8-Foot (2.44 M)), Cap Screw; (A) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", Front Extension Support, Cap Screw; (A: For 11 And 13 Standards) 5/8" X 3-1/2", Cap Screw; (5/8"X3-1/2"), Cap Screw; 5/8" X 3-1/2" 18'9" And 21'9", Cap Screw; (A) 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2", (With Differential Lock), Cap Screw; 5/8" X 3-1/2", (Used On 19 Ft.), Cap Screw; 5/8" X 3-1/2", (16 X 6 Disk) (8 X 12 And 10 X 10 Hoe), Cap Screw; 5/8" X 3-1/2", (Used On 19-Ft Model), Cap Screw; 5/8" X 3-1/2", (706 And 806), Cap Screw; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 5/8" X 3-1/2", Cap Screw; Ar 6-18(5/8"X3-1/2"), Cap Screw, Cap Screw; (A) 5/8"X4", Cap Screw; 5/8" X 3-1/2", (Without Markers), Cap Screw; 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", For 850, Cap Screw; 5/8" X 3-1/2", (Differential Lock), Cap Screw; 5/8" X 3-1/2" (For R64793), Cap Screw; 5/8" X 3-1/2", (Less Differential Lock), Cap Screw; (B) 5/8" X 3-1/2", Cap Screw; 15.875 X 88.900 mm (5/8" X 3-1/2"), Cap Screw; 5/8" X 3-1/2", (Use With R42332, R66649 Or R67903), Cap Screw; 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8), Cap Screw; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", (Use With (2) N135656), Cap Screw; (A: Not Used In U.S. And Canada) 5/8" X 3-1/2"	4
AN***90	Extension; 8" Stub Bar, Extension; 8", Extension; 196 mm (8")	1
AN***91	Extension; 12", Extension; 12" Stub Bar, Extension; 294 mm (12")	1

See all parts with full part numbers in Heavy Parts AI →

Tandem Wheel And Support (Main Frame) [A22]

John Deere : 685 - Plow, Chisel : Tandem Wheel And Support (Main Frame) [A22]

03***46	Bolt; (B: 11 Foot And 13 Foot Main Frame) 1" X 7-1/4", Bolt; 1" X 7-1/4", Bolt; 1" X 7-1/4", (Hs, Sae 8)	1
11***13	Cotter Pin, Cotter Pin; 3/16" X 1-3/4"	1
14***20	Nut; 1" 1", Nut; 1" Slotted, Nut, Nut; 1" 1" Slotted, Nut; 25.400 mm (1") 1" Uns Slotted, Nut; 1", (Use With An231087 And An281135), Nut; (A: Main Frame) (B: Wing Frame) 1", Nut; 1" 1" Uns Slotted, Nut; 1" No. 0.270, Nut; (B: Part Of Ar109180 Adjustable Front Axle) 1", Nut; 1" 1", Slotted, Nut; (B), Nut; 1" Slotted, L.H., Nut; 3/4" Slotted (R.H. Thread), Nut; 1", Unf, Slotted (1 Used L.H.) (1 Used R.H.), Nut; 1", Nut; 1", Slotted, Nut; (A) 1" Slotted, Nut; (B) 1", Nut; 1" (Use With An231087), Nut; 1", Slotted, Unf, Nut; 1", Slotted, Unf,, Nut; No. 0.270, Nut; 1", Unf, Nut; No.0.270, Nut; 1", (Sub For R48721)	1
19***70	Screw; 9/16" X 1-1/2" Hs, Sae 8, (16.5l-16.1 Tire), Screw; 9/16" X 1-1/2" (Hs, Sae 8) For Heavy Duty Wheel, 41' And Larger Machines, Screw; 9/16" X 1-1/2", Screw, Screw; 9/16" X 1-1/2" (Use With Re51671, Re50183 And Re51672), Screw; 9/16" X 1-1/2", (Flange Hardware Is Used For This Application), Screw; 9/16" X 1-1/2" Hs 8 Sae (Use With Re51672), Screw; 9/16" X 1-1/2", (Use With Re50183 Or Re51672), Screw; 9/16" X 1-1/2" (Use With Re51672 Wheel Only), Screw; 9/16" X 1-1/2" Without Sensor, Screw; 9/16" X 1-1/2" For 11l X 15 Load Range F Tire, Screw; 9/16" X 1-1/2" (Use With An232069)	8

See all parts with full part numbers in Heavy Parts AI →

Tine Bars And Tines (Tine Tooth Harrow Attachment) [B12]

John Deere : 685 - Plow, Chisel : Tine Bars And Tines (Tine Tooth Harrow Attachment) [B12]

BN***75	Complete Goods/Ship.; Order Thru Complete Goods, 3 Tine Spring Channel, Complete Goods/Ship.; (A: 3-Bar Coil-Tine Harrow) 3-Spring Channel, Complete Goods/Ship.; 3 Spring Channel, Complete Goods/Ship.; (3) 3-Spring Channels	1
BN***77	Complete Goods/Ship.; (3) 5-Spring Channels, Complete Goods/Ship.; 5 Spring Channel, Complete Goods/Ship.; (A: 3-Bar Coil-Tine Harrow) 5-Spring Channel, Complete Goods/Ship.; Order Thru Complete Goods, 5 Tine Spring Channel	1
BN***76	Complete Goods/Ship.; Order Thru Complete Goods, 4 Tine Spring Channel, Complete Goods/Ship.; (3) 4-Spring Channels, Complete Goods/Ship.; 4 Spring Channel, Complete Goods/Ship.; (A: 3-Bar Coil-Tine Harrow) 4-Spring Channel	1
E5***06	Flange Nut; Lock, Flange Nut; (A: 9550 (69*01- ) 9550sh (6901- )) 9.525 mm, Flange Nut; (B) 3/8", Flange Nut; (A: 9550 ( -6900) 9550sh ( -6900)), Flange Nut; 9.525 mm (3/8"), Flange Nut; (Sub (4) N10215), Flange Nut; (Sub N10215), Flange Nut; (A: 9550 (6901- ) 9550sh (6901- )), Flange Nut; (A: 9550 ( -6900) 9550sh ( -69*00)) 9.525 mm, Flange Nut; (A) 3/8", Flange Nut; (D) 3/8", Flange Nut; (A) 9.525 mm, Flange Nut; 3/8", 4 X 4 Frame, Flange Nut; (B) (C) 3/8", Flange Nut, Flange Nut; 9.525 mm, Flange Nut; 9.525 mm Main Frame, Flange Nut; 3/8" (20'-11"), Flange Nut; (Sub For M47015), Flange Nut; 3/8", Flange Nut; (A), Flange Nut; 3/8", (Sub E50102), Flange Nut; (A: Option), Flange Nut; (B), Flange Nut; (Sub For W30616, This Application), Flange Nut; Flex Fold, Flange Nut; (Sub For W30616)	0

See all parts with full part numbers in Heavy Parts AI →

Touchset™ Depth Control [B07]

John Deere : 685 - Plow, Chisel : Touchset™ Depth Control [B07]

03***15	Bolt; 5/16"X2" (Sub For 03h2209), Bolt; 5/16" X 2" (For Sound-Gard Body), Bolt; 5/16" X 2", (For Sound-Gard Cabs), Bolt, Bolt; 5/16" X 2", Bolt; 5/16" X 2", Rd. Hd., Bolt; (A: Coded Items Are Used With The 714 mm (28-1/8") Angle.) 5/16" X 2", Bolt; 5/16"X2" (Sub For 03h2209 Appl)	1
03***29	Bolt; 5/16" X 4-1/2"	2
12***95	Nut; (A) 4.826 mm (0.190"), Nut, Nut; 4.826 mm (0.190"), Nut; (A) 4.826 mm (0.190") Int. Tooth, Nut; 0.190" (Sub 12m7060), Nut; 0.190" 3/16", Nut; 4.826 mm (0.190") Internal Tooth, (Sub 12m7060), Nut; 0.190", (Sub 12m7060), Nut; 0.190" (For Ar56671), Nut; 4.826 mm, Nut; Internal-Tooth No. 10, Nut; 4.826 mm (0.190") Internal Tooth, Use With Ground Wire, (Sub 12m7060), Nut; 4.826 mm (0.190") External Tooth, (Sub 12m7060), Nut; 0.190", Nut; 4.826 mm (0.190") Germany, (Sub 12m7060), Nut; 0.190", Internal Tooth, Nut; Internal-Tooth, No. 10, Nut; 0.190", (Sub R74466), Nut; 4.826 mm (0.190") (Sub 12m7060), Nut; 0.190" Not Used This Application, Nut; 4.826 mm (0.190") Internal Tooth, Nut; 0.190" No. 10, Lock Washer; 0.190", Nut; 4.826 mm (0.190") (8630, 8640), Nut; No.10, Nut; No. 10, Nut; 4.826 mm (0.190") (Diesel, Less Cab), Nut; (A) (B) 4.826 mm (0.190") (Sub For Au43855) (Sub 12m7060), Nut; (A) 0.190", (Sub 12m7060), Nut; No 10, Nut; (Sub For Mg280254), Nut; 4.826 mm (0.190") All Other European Countries, (Sub 12m7060), Nut; 4.826 mm (0.190") Not Used This Application, (Sub 12m7060), Nut; Internal Tooth, No. 10, Nut; 0.190", (Sub (10) 12m7060), Nut; 10 mm, Nut; 0.190" (Internal Tooth), Nut; 0.190" (Use With At100083 And At100084), Nut; (A) No.10, Nut; 0.190" (Part Of Re15583), Nut; 0.190", (Internal Tooth), Nut; 3/16", Nut; 0.190", No. 10, Internal-Tooth, Nut; Nla	2
14***31	Nut; (A: 9901 With Temperature And Oil Pressure Gages) (B: 9902 For Enclosure Field) 0.190", Nut; 0.190", Square, Nut; 0.190" (Use With Am53945), Nut; 0.190", (Export), Nut; M6, Nut; N0.10, Nut; (A) No 10, Nut; (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" (Sender), Nut; 0.190", Unf, Nut; (A) 0.190" 0.19", Nut; (A) (B) 0.190", Unf (4 Used Per Module), Nut; (C) 0.190", Nut; 0.190", (Sub For N198083), Nut; (B) 0.190", Nut; 0.190" No. 10 Unf, Nut; 0.190", (English), Nut; (Sub Ar102763) (Also Order 12h295), Nut; 0.190", (2-On Circuit Breaker Terminals, 2-Hold Circuit Breaker To Panel, 1-Motor To Tab On Door), Nut; 0.190" No. 10 (8630, 8640), Nut; No. 10-32, Unf (4 Used Per Module), Nut; No. 10-24, (Sub For Ty4057), Nut; 0.190" (4650, 8430, 8450), Nut; No. 10-24, Nut; No. 10, Unf, Nut; (A) No. 10, Nut; 4.826 mm, Nut; No. 10-32, Unf, Nut; 0.190", Nut; 0.190" (Part Of Re15583), Nut; 4.826 mm (0.190") Unf, Nut; 0.190", (200 Per Package) (Sub For Mg87825), Nut; (A) No.10, Nut; N.10, Nut; (B) No.10, Nut; 0.190" (Sub For 14h778, This Application), Nut; 0.190" 5/16", Nut; 10-24, Nut; (B: With Cab) 0.190", Nut; 0.190", (10 Used Syncro-Range) (11 Used Power Shift), Nut; 0.190", No.10, Nut; 0.190", (Sub For Ty4057), Nut; Unf No 10, Nut; 4.826 mm (0.190") No. 10, Nut; 0.190", Unf (With Iron-Gard), Nut; Hex, 10-24, Nut; No 10, Nut; 0.190", Machine Screw, Nut; (A) 0.190", Unf, Nut; 0.190", (16 Used With Cab) (24 Used With Air Conditioning), Nut; 0.190", For Units And Auger Shaft, Nut; 0.190", (A), Nut; (B: Also Includes Sn:) 0.190", Nut; 0.190", (Use With Re41759) (3011, 3016), Nut; 0.190", (2 Used Gasoline And Lp Gas) (3 Used Diesel), Nut; 0.190", (Starter Motor Solenoid Terminal), Nut; 0.190", Germany, Nut; 0.190" (4640, 4650, 4840, 8430, 8450), Nut; No 10, Ar, Nut; 0,190", Nut, Nut; 0.190", 200 Per Package, Nut; 0.190", North America, Nut; 0.190" (Also Order 12m7060), Nut; 0.190" (19 W/ Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 4.826 mm (0.190"), Nut; (A) 0.190", Nut; 0.190", (2 Used Gasoline And Lp-Gas) (3 Used Diesel), Nut; 0.190" (20 W/Sgb) (17 W/O Sgb), Nut; No. 10, Nut; No.10, Nut; (A: If Equipped) 0.190", Nut; (A), Nut; (A) No. 10-32, Unf, Nut; 0.190", (Use With Code 7201), Nut; 0.190", Unf, (2) Furnished With Additional Function, Nut; (A) (B) 0.190", Nut; (A: 3201 Panel Gages Sp Cntrl) (B: 3202 Panel Gages Sp Cntrl) (C: 3208 Panel Gages Sp Cntrl) 0.190", Nut; 0.190", Lock, Nut; 0.190", Df, Tf, Af, Nut; 0.190", (Sub For Ar102763), Nut; 0.190", All Other European Countries, Nut, Nut; 0.190", Not Used This Application, Nut; 0.190" (For Ar56671), Nut; (A) (B) No. 10-32, Unf, Nut; 0.190" (4050), Nut; 4.826 mm (0.190") No. 10 (8630, 8640), Nut; (K) 0.190", Nut; 0.190" (A), Nut; (A) (B) (C) 0.190", Nut; 0.190", 200 Per Package, (Sub For Mg87825), Nut; 4.826 mm, Nut; 0.190", (Gasoline), Nut; 0.190" (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" 0.190", Nut; 0.190", No. 10, Nut; 0.190" (19 W/Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 0.190", (Use With Ar11109 Or Ar11116), Nut; (A: With Intelliguard) 0.190", Nut; 0.190" (Sub Ar102763) (Also Order 12h295), Nut; 0.190", Nut; 0.190", Not Applicable, Nut; 0.190" (Use With At100083 And At100084), Nut; (C: Sgb (53***01-)) 0.190", Nut; 0.190" (10-32 Unf), Nut; 0.190" (Use With Re207840)	2

See all parts with full part numbers in Heavy Parts AI →

Transport Lockup Valve Mounting [B14]

John Deere : 685 - Plow, Chisel : Transport Lockup Valve Mounting [B14]

19***28	Screw; (B: Quad-Range Transmission) 3/8" X 4", Screw; 3/8" X 4", With Cab, Screw; 3/8" X 4", (Use With Ar60701), Screw; 3/8 X 4, Screw; (B: (Xxxxxx- ) 4050-00*44 (Qrt)) 3/8" X 4", Screw; 3/8"X4", Screw; 3/8" X 4" (Qrt) (Pst), Screw; (B) 3/8" X 4", (Rear Flange Center Hole), Screw; 3/8" X 4" (With Level Lift Hitch), Screw; (A: Quad-Range Transmission) 3/8" X 4", Screw; 3/8" X 4" Rh, Screw; 3/8" X 4", (Europe), Screw; (B: Power Shift Transmission) 3/8" X 4", Screw; 3/8" X 4" (Sub 19h3404 And M72490), Screw; (B: Quad-Range Transmission) (F: (Xxxxxx- ) 4050-0044 (Qrt)) 3/8" X 4", Screw; 3/8"X3/4", Screw; 9.525 X 101.600 mm, Screw; (B: Quad-Range Transmission) (C: ( -Xxxxxx) 4055-0100; 4255-0100; 4455-02**00) 3/8" X 4", Screw; 3/8" X 4" (Qrt), Screw; 3/8" X 4", Screw; 3/8" X 4", (Sub 19h3404 And M72490), Screw; 3/8" X 4", (Sub 19h3404 And R70234), Screw; 3/8" X 4", (Sub Pt12948), Screw; 3/8" X 4" (Use With N187584), Screw, Screw; 3/8"X7/8", Screw; 3/8" X 4" (Rh), Screw; 3/8" X 4" (Sub 19h3404 And R70234), Screw; 3/8" X 4" (Sub For 19h1854), Screw; (A) 3/8" X 4", Screw; 3/8" X 4" (Europe)	2
19***33	Screw; 3/8" X 1-1/2" (Hs Sae 8), Screw; 9.525 X 38.100 mm (3/8" X 1-1/2"), Screw; 3/8" X 1-1/2" Sae 8; Low, Screw; 3/8" X 1-1/2", (Use With Ah66262), Screw; 3/8" X 1-1/2" 3/8 Unc-2a X 1 1/2 A17d Zn, Screw; 3/8" X 1-1/2" 3/8" X 1 1/2", Cap Screw; 3/8" X 1-1/2", Screw; (C: Code 1709 With Air Cleaner Mounting Pad) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" (D), Screw; 3/8"X1-1/2" For, 3179dl013, Screw; (B) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (1 Used L.H.) (1 Used R.H.), Screw; 3/8" X 1-1/2" Torque To 45 Lb-Ft (61 N-M), Screw; (A: Included In Ae48634) 3/8" X 1-1/2" For Use W/L.H. Gage Wheel Only, Screw; 3/8" X 1-1/2", (Use With Re61619), Screw; 9.525 X 38.100 mm, (Sae 8), Screw; 3/8" X 1-1/2" Hs, Sae 8, 3/8" X 1-1/2", Screw, Screw; 3/8" X 1-1/2" (Use With Re500917), Screw; 3/8" X 1-1/2" (A), Screw; (A) (B) 3/8" X 1-1/2" For Long Tooth Pickup Order H78421 Screw., Screw; 3/8" X 1-1/2", (Sae 8), Screw; 3/8" X 1-1/2" Sae 8, Cap Screw; 9.525 X 38.100 mm, Cap Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2" (Hs, Sae 8) (Sub For 19h1116), Screw; 3/8" X 1-1/2" (Dh-01, Dh-02, Gh-01, Gh-02, Hc-D, Hf-G), Screw; 3/8" X 1-1/2", (Use With 15h624), Screw; 3/8" X 1-1/2", (Code 1703), Screw; 3/8" X 1-1/2" (Sae 8), Low, Screw; 3/8" X 1-1/2" (Sae 8), Screw; 3/8" X 1-1/2", Hs, Sae 8, 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (2034), Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2", (Use With E95899), Screw; 3/8"X1-1/2" For, 3179dl004, Screw; 3/8"X1-1/2", (For 3179dl001), Screw; (Sub For R40808 Or R112876, This Application), Screw; Hs, Sae 8, 3/8" X 1-1/2", Cap Screw, Screw; 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2" (Hs, Sae 8), Screw; (Sub For R40808 Or R112876), Screw; 3/8"X1-1/2" (Sub For 19h1765, 19h1800), Screw; 9.525 X 38.100 mm, Screw; 3/8" X 1-1/2", Up, Screw; 3/8" X 1-1/2", (Hd-G), Screw; 3/8"X1-1/2" (Sub For 19h1765), Screw; 3/8" X 1-1/2", (Sub For 19h3385, This Application), Screw; 3/8" X 1-1/2", (Na-D, Na-G, Dn-01, Gn-01), Screw; 3/8" X 1-1/2", (Short Tongue), Screw; 3/8" X 1-1/2", (Gas), Screw; 3/8" X 1-1/2" (913, 915, -64*49, 3 Used) (915, 64*50-, 918, 920, 922, 924, 925, 930, 5 Used), Screw; 3/8" X 1-1/2" 3/8 Unc-2ax1/2 A17d Zn, Screw; 3/8" X 1-1/2", Low, Screw; 3/8" X 1-1/2", (Long Tongue), Screw; 3/8" X 1-1/2" (6081hh010), Screw; 3/8" X 1-1/2", (Ha-G, Ha-D, Ha-L, Hb-G, Hb-D, Hb-L, Hc-G, Na-D, Na-G, Na-L), Screw; 3/8" X 1-1/2" (For Re500917), Screw; 3/8" X 1-1/2" (Short Tongue), Screw; (C: Code 1703 Air Intake Short) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", Full Thread, (Sub For 19h2471), Screw; 3/8" X 1-1/2", For Use W/L.H. Pickup Gage Whl Only, Screw; 3/8" X 1-1/2" (Rigid), Screw; 3/8" X 1-1/2" (Sae 8) , Low, Screw; 3/8" X 1-1/2" (Hs, Sae 8), Screw; 3/8" X 1-1/2", (Hs, Sae 8), Screw; (A) 3/8" X 1-1/2", Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", Screw; 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", (For 3179dl016), Screw; 3/8"X1-1/2", (Sub For 19h1765), Screw; (Sub For R112876 Or R40808, This Application), Screw; 3/8" X 1-1/2", (Sub For T31783, This Application), Screw; 3/8" X 1-1/2", (1708), Screw; 3/8" X 1-1/2" (Long Tongue), Screw; 3/8"X1-1/2", For 3179dl001, Screw; 3/8" X 1-1/2" (Hs=10.9), Sae 8, Screw; 3/8" X 1-1/2" Incld With Engine, Screw; 3/8" X 1-1/2", (1703), Screw; (C) 3/8" X 1-1/2", Screw; 3/8"X1-1/2", For 3179dl016	1
AN***06	Valve; (Sub For Aa14834, This Application), Valve; Needle, Valve; Shut-Off, Valve; (3.5 Turns To Close), Valve; (A), Valve; (3-1/2 Turns To Close), Valve, Valve; Shut Off, Valve; Transport Lockup, Valve; Flow Control	1
K4***03	Lock Nut; (Sub For W13579) 3/8", Lock Nut; (B: (Xxxxxx- )4755-01*04;4955-0125), Lock Nut; 9.525 mm (3/8") (Sub For W13579), Lock Nut; (Also Order 24h1136) (Sub For R53670, This Application), Lock Nut; 3/8" (With Level Lift Hitch), Lock Nut; Narrow, Lock Nut; (Use With 19h2128), Lock Nut; (B) 3/8", Lock Nut; (A) 3/8", (Sub For W13579), Lock Nut; (C) 3/8", Lock Nut; (Sub For R189280, This Application), Lock Nut; (A: For 2.8 M (9'2") Size) 9.525 mm (3/8"), Lock Nut; (C: For 3.6 M (12'0") Size) 9.525 mm (3/8"), Lock Nut; (Use With Re162261), Lock Nut; (B: Amber Warning Light Assembly) 9.525 mm, Lock Nut; 9.525 mm (3/8") (Sub For R53670), Lock Nut; (Sub For R41564, This Application), Lock Nut; (Sub For R41564), Lock Nut; (A), Lock Nut; (A) (Sub For E50102), Lock Nut; 9.525 mm (3/8") 3/8", Lock Nut; 3/8", (3.7 M (12-Ft.) Platform, 9 Used) (4.3 M (14-Ft.) Platform, 12 Used) (Sub For W13579), Lock Nut; 3/8", (Sub For W13579), Lock Nut; (Also Order 24h1136), Lock Nut; 9.525 mm (With Level Lift Hitch), Lock Nut; (C: Part Of Ar109180 Adjustable Front Axle), Lock Nut; (B: For 3.0 M (10'0") Size) 9.525 mm (3/8"), Lock Nut; (Also Order 24h1136) (Sub For R53668, This Application), Lock Nut; 9.525 mm (Folding), Lock Nut; (D: For 3.7 M (12'4") Size) 9.525 mm (3/8"), Lock Nut; (D: For 4.0 M (13'5") Size) 9.525 mm (3/8"), Lock Nut; (A: Red Warning Light Assembly) 9.525 mm, Lock Nut; (Sub For W13579), Lock Nut; (6 Used Twin Swath), Lock Nut; (B: (Xxxxxx- )4560-0028;4760-0051;4960-00**55), Lock Nut; (C: For 3.4 M (11'2") Size) 9.525 mm (3/8"), Lock Nut; (Sub For R189280), Lock Nut; (Sub For U13184 And W13579), Lock Nut; 3/8", (Sub For R41564), Lock Nut; 9.525 mm (3/8"), Lock Nut; 3/8", (Use With N260835), Lock Nut, Lock Nut; 3/8", (Sub For E50302), Lock Nut; (D) 3/8", Lock Nut; (A: For 2.7 M (8'11") Size) 9.525 mm (3/8"), Lock Nut; (A: Separate Fertilizer Placement), Lock Nut; Use With A88788, Lock Nut; (B: For 3.2 M (10'7") Size) 9.525 mm (3/8"), Lock Nut; (A) (B) (C) 3/8", Lock Nut; (Also Order 24h1136) (Sub R53670), Lock Nut; (Twin Swath), Lock Nut; 3/8", R.H., Lock Nut; (Use With O.And S.), Lock Nut; 3/8", (Use With Aa22080, Aa22081 And Aa24267), Lock Nut; (A) 9.525 mm (3/8"), Lock Nut; 3/8", (Europe), Lock Nut; Sp, Lock Nut; (A) 3/8", Lock Nut; 3/8", Lock Nut; 3/8", (Sub For R53670), Lock Nut; (Use With Aa22080), Lock Nut; 9.525 mm, Lock Nut; 9.525 mm (Europe), Lock Nut; 3/8", (Also Order 24h1136)	3

See all parts with full part numbers in Heavy Parts AI →

Twisted Double Point Shovels [C09]

John Deere : 685 - Plow, Chisel : Twisted Double Point Shovels [C09]

N1***94	Shovel; (C) 3" X 22" (Sub For Y994n), Shovel; (B: Twisted Double Point Shovels) 76 mm X 559 mm (3" X 22") R.H., Shovel; Twisted, R.H., 76 mm X 559 mm (3" X 22"), Shovel; Twisted R.H. 76 mm X 559 mm (3" X 22") (Sub For Y994n), Shovel; (C: Twisted Double Point Shovels) 76 mm X 559 mm (3" X 22") Rh, Shovel; (E: Shovels) 76 mm X 559 mm (3" X 22") Twisted, R.H., Shovel; Twisted, R.H. 76 mm X 559 mm (3" X 22") (Sub For Y994n), Shovel; (C: Twisted Double Point Shovels) 76mm X 559mm (3"X 22") R.H., Shovel; R.H. 76 mm X 559 mm (3" X 22"), Shovel; (C: Twisted Double Point Shovels) 76 mm X 559 mm (3" X 22") R.H., Shovel; Twisted, R.H., 76 mm X 559 mm (3" X 22") (Sub For Y994n)	1
N1***95	Shovel; Twisted, L.H. 76 mm X 559 mm (3" X 22") (Sub For Y995n), Shovel; Twisted L.H. 76 mm X 559 mm (3" X 22") (Sub For Y995n), Shovel; Twisted, L.H., 76 mm X 559 mm (3" X 22"), Shovel; (B: Twisted Double Point Shovels) 76 mm X 559 mm (3" X 22") L.H., Shovel; (C: Twisted Double Point Shovels) 76 mm X 559 mm (3" X 22") Lh, Shovel; (E: Shovels) 76 mm X 559 mm (3" X 22") Twisted, L.H., Shovel; (C) 3" X 22" (Sub For Y995n), Shovel; (C: Twisted Double Point Shovels) 76mm X 559mm (3"X 22") L.H, Shovel; L.H. 76 mm X 559 mm (3" X 22"), Shovel; (C: Twisted Double Point Shovels) 76 mm X 559 mm (3" X 22") L.H., Shovel; Twisted, L.H., 76 mm X 559 mm (3" X 22") (Sub For Y995n)	1

See all parts with full part numbers in Heavy Parts AI →

Warning Lights [C01]

John Deere : 685 - Plow, Chisel : Warning Lights [C01]

AH***25	Plug; (Sub 57m8340), Plug; (B), Plug; 7-Way, Plug; Outlet, Plug, Plug; (E), Plug; (7-Pin), Plug; 7-Pin, Plug; (Sub 57m8340) 7 Pin, Plug; (Sub 57m8340)Seven-Way, Plug; 7-Way, (Sub 57m8340), Plug; (Sub 57m8340)(7-Way), Plug; 7 Pin, Plug; 7 Way, Plug; 7-Pin Plug, Plug; (C), Plug; (Electrical Outlet Male Plug)	1
AN***89	Bracket; With Reflectors, Bracket; Lamp (Includes Red Reflector), Bracket; Includes Red Reflector, Bracket; (Includes Reflector) (Sub For N231841)	2
AN***44	Tail Lamp; (B: Furnished With Ty16055 Only.) Tail, Includes Bulb, Tail Lamp, Tail Lamp; (D: Red) (B: Includes Lens, Pad And Nut), Tail Lamp; Red, Tail (Includes Lens, Pad And Nut), Tail Lamp; Red, Tail Lamp; (B) Tail, Tail Lamp; Tail (Includes Lens, Pad And Nut), Tail Lamp; Tail, Tail Lamp; Tail, Red (Includes Bulb), Tail Lamp; (Furnish With Re12331), Tail Lamp; Red (Inlcudes Lens, Pad And Nut), Tail Lamp; Surtir Con Re12331, Tail Lamp; Red (Includes Lens, Pad And Nut), Tail Lamp; Tail, Red (Includes Lens, Pad And Nut), Tail Lamp; (B: Red Light) Lh, Tail Lamp; (B), Tail Lamp; Red Light (L.H.), Tail Lamp; (B) Tail, Includes Bulb, Tail Lamp; Red (Lens Not Available Separately), Tail Lamp; Tail, Includes Bulb, Tail Lamp; Tail-Red (Includes Lens, Pad And Nut) (Outside Of Machine), Tail Lamp; Tail-Red (Includes Lens, Pad And Nut)	1
AN***45	Lamp; (B: Furnished With Ty16055 Only.) Warning, Includes Bulb, Lamp; Warning (Includes Lens, Pad And Nut), Lamp; Amber Warning, Lamp; (Sub For An234536), Lamp; Warning, Lamp; Amber (Includes Lens, Pad And Nut), Lamp; (Furnish With Re12331), Lamp; (B) Warning, Includes Bulb, Lamp; (Sub For Ah164497, This Application) Amber, Lamp; Install With Short Leg Outward On N128652, Lamp; Amber Light (R.H. & L.H.), Lamp; Amber, Warning (Includes Lens, Pad And Nut), Lamp; Amber (Lens Not Available Separately), Lamp; Amber Lens, Lamp; Warning, Amber (Includes Bulb), Lamp; (C: Warning), Lamp; Amber (Includes Lens, Pad, Nut, Connector And Bulb), Lamp; Amber, Lamp; Warning, Amber (Includes Lens, Pad And Nut), Lamp; Surtir Con Re12331, Lamp; Amber Light (R.H. And L.H.), Lamp; Amber, Warning Lamp, Lamp, Lamp; Warning Light, Lamp; (A: Amber Light) (Rh And Lh), Lamp; Warning, Includes Bulb	2

See all parts with full part numbers in Heavy Parts AI →

Wheel And Hub (Wing) [A25]

John Deere : 685 - Plow, Chisel : Wheel And Hub (Wing) [A25]

11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	1
14***02	Nut; (B: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4", Slotted, Fine Thread, Nut; 1/4", Nut; 3/4" 3/4" Slotted, Nut; 3/4" 3/4", Slotted, Nut; 3/4", Unf, Nut; (C: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4'(For Al34936), Nut; 3/4" (Slotted), Nut; 3/4" 2wd, Nut; (A: Slotted) 3/4", Nut; 18mm, Nut; 3/4", (Slotted), Nut; 3/4", (Sub 14h1086), Nut; 3/4" 3/4", Nut; 3/4", Unf., Nut; 5/8", Nut; Slotted, Nut; 3/4" 3/4" Unf, Nut; No. 0.210, Nut; 3/4", Nut; 3/4", (U/W Heavy Duty Dual Axle), Nut; 3/4" Hex Slotted, Nut; (A: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4"(For Al34935), Nut; (A), Nut; (A) 3/4", Nut; (A) (B) 3/4", Nut; Rh, Lh, Nut; 19.050 mm (3/4") 3/4", Slotted, Nut; 3/4" (Sub 14h902,This Application And11h237), Nut; 3/4', Slotted, Nut; 5/8", Rh, Lh, Nut; (B: (Regular Duty) Two-Wheel Drive) (C: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/8", Td, Nut; 5/8" Rh, Lh, Nut; (A: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4" (Use With An232006), Nut; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 3/4", Nut; 3/4", Unf, Slotted, Nut; 19.050 mm (3/4"), Nut; 3/4" Slotted, Nut; 3/4" Unf, Nut, Nut; 3/4" Unf, Slotted, Nut; Rh, 5/8", Nut; 19.050 mm (3/4") (Sub 14h1086), Nut; 3/4" (Sub For 14h904, This Application) (Use With 11h237), Nut; 3/4", Slotted, Unf, Nut; 3/4", Slotted, Nut; 3/4" Unf Slotted	1
AH***17	Seal; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")), Seal; (B), Seal, Seal; (A) (B), Seal; (A)	1
AN***49	Tire Valve Stem; For Tubeless Tire, Tire Valve Stem; (A: Main Frame) (B: Wing Frame), Tire Valve Stem; W/O Calcium Chloride Tubeless, Tire Valve Stem; (Tubeless) (Sub For At37037 (Without Calcium Chloride)), Tire Valve Stem; (7.6 X 15-6 And 11 X 15-8 Tires), Tire Valve Stem; (11l X 15 Tires), Tire Valve Stem; (Tubeless) (Sub For At37037 And At38142), Tire Valve Stem; (Use With Tubeless Tires), Tire Valve Stem; Inside, Tire Valve Stem; (Tubeless) (Sub For At37037), Tire Valve Stem; (C) (For Use With Tubeless Tire On Jd1091 Wheel), Tire Valve Stem; (For 11l-15 Tire), Tire Valve Stem; (11 X 15-8 Tires), Tire Valve Stem; (Use With Lva13909 Rim), Tire Valve Stem; (Use With Jd1091), Tire Valve Stem, Tire Valve Stem; Rear (R4), Tire Valve Stem; (For 9.5l-15 8pr Tire), Tire Valve Stem; (Use With Lva13902 Rim), Tire Valve Stem; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")), Tire Valve Stem; Use With Jd1091 Wheel., Tire Valve Stem; (Use With Jd3043), Tire Valve Stem; (Use With Lva13905)	1

See all parts with full part numbers in Heavy Parts AI →

Wing - Inner (47' Plow) [A12]

John Deere : 685 - Plow, Chisel : Wing - Inner (47' Plow) [A12]

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
19***33	Cap Screw; 5/8" X 3-1/2" Drawbar, Cap Screw; 5/8" X 3-1/2", Auxiliary Hydraulic System, Cap Screw; 5/8" X 3-1/2" Main Frame Hinge, Cap Screw; 5/8" X 3-1/2", (8-Foot (2.44 M)), Cap Screw; (A) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", Front Extension Support, Cap Screw; (A: For 11 And 13 Standards) 5/8" X 3-1/2", Cap Screw; (5/8"X3-1/2"), Cap Screw; 5/8" X 3-1/2" 18'9" And 21'9", Cap Screw; (A) 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2", (With Differential Lock), Cap Screw; 5/8" X 3-1/2", (Used On 19 Ft.), Cap Screw; 5/8" X 3-1/2", (16 X 6 Disk) (8 X 12 And 10 X 10 Hoe), Cap Screw; 5/8" X 3-1/2", (Used On 19-Ft Model), Cap Screw; 5/8" X 3-1/2", (706 And 806), Cap Screw; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 5/8" X 3-1/2", Cap Screw; Ar 6-18(5/8"X3-1/2"), Cap Screw, Cap Screw; (A) 5/8"X4", Cap Screw; 5/8" X 3-1/2", (Without Markers), Cap Screw; 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", For 850, Cap Screw; 5/8" X 3-1/2", (Differential Lock), Cap Screw; 5/8" X 3-1/2" (For R64793), Cap Screw; 5/8" X 3-1/2", (Less Differential Lock), Cap Screw; (B) 5/8" X 3-1/2", Cap Screw; 15.875 X 88.900 mm (5/8" X 3-1/2"), Cap Screw; 5/8" X 3-1/2", (Use With R42332, R66649 Or R67903), Cap Screw; 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8), Cap Screw; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", (Use With (2) N135656), Cap Screw; (A: Not Used In U.S. And Canada) 5/8" X 3-1/2"	8
AN***12	Structural Tubing	1
AN***49	Wing Frame	1

See all parts with full part numbers in Heavy Parts AI →

Wing - Inner (55' Plow) [A13]

John Deere : 685 - Plow, Chisel : Wing - Inner (55' Plow) [A13]

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	28
19***23	Cap Screw; 5/8"X5-1/2", Cap Screw; 5/8" X 5-1/2" (For R64100), Cap Screw; 5/8" X 5-1/2" (For 25 And 27-Foot Only), Cap Screw; (B) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (4 Used, 47 Thru 51-Foot Machine), Cap Screw; Low, 5/8"X5-1/2", Cap Screw; 5/8" X 5-1/2" (Use With Mechanical Depth Control), Cap Screw; 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Sub For T20089 And 19h2351, This Application), Cap Screw; (A: Narrow) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Use With N138383), Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", Bwa Only, Cap Screw; Low, 5/8" X 5-1/2", Cap Screw; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" X 5-1/2" (Sub For 19h3174, 19m8019), Cap Screw; (C) 5/8" X 5-1/2", Cap Screw; (A: Main Frame, Wingframe (3 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer) 5/8" X 5-1/2", Cap Screw; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (For 4" X 4" Frame), Cap Screw; 5/8" X 5-1/2" (For 23 Thru 27-Foot Machines), Cap Screw; 5/8" X 5-1/2", (Used On 24-Ft And 30-Ft Models), Cap Screw; (D) 5/8" X 5-1/2", Cap Screw; (A) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (With Drawbar Offset-Front Hole), Cap Screw; (A) (B) (C) 5/8" X 5-1/2", On Right Rear Frame, Outer End, Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Used On 24 And 30 Ft.), Cap Screw; 15.875 X 139.700 mm (5/8" X 5-1/2"), Cap Screw; 5/8" X 5-1/2", (For 23' Thru 28'4" Machines), Cap Screw; (D) 5/8" X 5-1/2", On Right Rear Frame, Outer End, Cap Screw; 5/8" X 5-1/2", For 4" X 4" (102 X 102 mm) Frame (Lower), Cap Screw; 5/8" X 5-1/2", Lower Holes, Cap Screw; 5/8" X 5-1/2" Wide, Cap Screw; (B) (C) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 5-1/2", Lower Holes (For 6359d Engine), Cap Screw; 5/8" X 5-1/2", (For 102 X 102 mm (4" X 4") Frame), Cap Screw; (A: 27 Ft - 9 In) (B: 30 Ft - 9 In (Illustrated)) 5/8" X 5-1/2", Cap Screw; (E) 5/8" X 5-1/2"	8
19***33	Cap Screw; 5/8" X 3-1/2" Drawbar, Cap Screw; 5/8" X 3-1/2", Auxiliary Hydraulic System, Cap Screw; 5/8" X 3-1/2" Main Frame Hinge, Cap Screw; 5/8" X 3-1/2", (8-Foot (2.44 M)), Cap Screw; (A) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", Front Extension Support, Cap Screw; (A: For 11 And 13 Standards) 5/8" X 3-1/2", Cap Screw; (5/8"X3-1/2"), Cap Screw; 5/8" X 3-1/2" 18'9" And 21'9", Cap Screw; (A) 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2", (With Differential Lock), Cap Screw; 5/8" X 3-1/2", (Used On 19 Ft.), Cap Screw; 5/8" X 3-1/2", (16 X 6 Disk) (8 X 12 And 10 X 10 Hoe), Cap Screw; 5/8" X 3-1/2", (Used On 19-Ft Model), Cap Screw; 5/8" X 3-1/2", (706 And 806), Cap Screw; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 5/8" X 3-1/2", Cap Screw; Ar 6-18(5/8"X3-1/2"), Cap Screw, Cap Screw; (A) 5/8"X4", Cap Screw; 5/8" X 3-1/2", (Without Markers), Cap Screw; 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", For 850, Cap Screw; 5/8" X 3-1/2", (Differential Lock), Cap Screw; 5/8" X 3-1/2" (For R64793), Cap Screw; 5/8" X 3-1/2", (Less Differential Lock), Cap Screw; (B) 5/8" X 3-1/2", Cap Screw; 15.875 X 88.900 mm (5/8" X 3-1/2"), Cap Screw; 5/8" X 3-1/2", (Use With R42332, R66649 Or R67903), Cap Screw; 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8), Cap Screw; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", (Use With (2) N135656), Cap Screw; (A: Not Used In U.S. And Canada) 5/8" X 3-1/2"	12
24***67	Washer; (V) 21/32" X 1-1/4" X 1/4", Washer; 21/32"X1-1/4"X0.250", Washer; 21/32" X 1-1/4" X 1/4" With Strap A59036 Only, Washer; (B) 21/32" X 1-5/6" X .250", Washer; (A: For 2 Weights) (B: For 4 Weights) (C: For Six Weights) (D: For 8 Weights / 10 Weights) 21/32" X 1-1/4" X 1/4", Washer; (E) 21/32" X 1-1/4" X 1/4", Washer; 21/32" X 1-1/4" X 1/4" (Disk), Washer; 16.662 X 31.750 X 6.350 mm (21/32" X 1-1/4" X 1/4"), Washer; (D) 21/32" X 1-1/4" X 1/4", Washer; (F) 21/32" X 1-1/4" X 1/4", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 21/32" X 1-1/4" X 1/4", Washer; 21/32" X 1-1/4 X 1/4", Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) (D: 8 Weights / 10 Weights) 21/32" X 1-1/4" X 1/4", Washer; 16,66 X 31,75 X 6,35 mm, Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) (D: 8 Weights / 10 Weights) (E: Used In 5715 Orchard Tractor Too) 21/32" X 1-1/4" X 1/4", Washer; 16,66 X 31,75 X 6,35 mm (For Ae45370), Washer; (B) 21/32" X 1-1/4" X 1/4", Washer, Washer; (A: For 2 Weights) (B: For 4 Weights) (C: For 6 Weights) (D: For 8 Weights / 10 Weights) (E: Used In 5715 Orchard Tractor Too) 21/32" X 1-1/4" X 1/4", Washer; (A: With Rotor-Type Pickup) 21/32" X 1-1/4" X 1/4", Washer; (A: W/O Ether Starting Aid) 21/32" X 1-1/4" X 1/4", Washer; 21/32" X 1-1/4" X 0.250", (Used With Wheel Spacers), Washer; 21/32" X 1-1/4" X 1/4" 13' Main Frame Only, Washer; (C) (D) 21/32" X 1-1/4" X 1/4", Washer; 21/32" X 1-1/4" X 1/4", Either Side Of Sheave For Alignment, Washer; 21/32" X 1-1/4" X .250", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 21/32" X 1-1/4" X 1/4", Washer; 21/32" X 1-1/4" X 1/4", (Used With Wheel Spacers), Washer; (A: 8r40) (B: 10r30 And 12r30) (C: 12r36) 21/32" X 1-1/4" X 1/4", Washer; 21/32" X 1-1/4" X 1/4", (Use With 19h1950), Washer; 21/32" X 1-1/4" X 1/4" (Lh Side Only), Washer; (A) (B) 21/32" X 1-1/4" X 1/4", Washer; 21/32"X1 1/4x0.250 Zn, Washer; 21/32" X 1-1/4" X 1/4", When Mounted To "W" Unit, Washer; 21/32" X 1-1/4" X 1/4", (Wheel Spacers), Washer; 21/32" X 1-1/4" X 1/4" 21/32" X 1-1/4" X .250" (Used With Wheel Spacers), Washer; 16,6 X 31,7 X 6,3 mm, Washer; (C) 21/32" X 1-1/4" X 1/4", Washer; 21/32"X1-1/4"X0.25, Washer; 21/32" X 1-1/4" X 1/4" (Use With N234623), Washer; (A) (B) (C) (D) 21/32" X 1-1/4" X 1/4", Washer; 21/32"X1-1/4"0.25", Washer; (A: For 2 Weights) (B: For 4 Weights) (C: For 6 Weights) (D: For 8 Weights / 10 Weights) 21/32" X 1-1/4" X 1/4", Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) (D: Eight Weights / Ten Weights) 21/32" X 1-1/4" X 1/4", Washer; 21/32" X 1-1/4" X 1/4", Region I, Washer; 21/32"X1-1/4"X0.250" Zn, Washer; (B) (C) 21/32" X 1-1/4" X 1/4", Washer; (A: Coded Items Are Used Together) 21/32" X 1-1/4" X 1/4", Washer; (A: For 360 Mower) (B: For 370 Mower) 21/32" X 1-1/4" X 1/4", Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 21/32" X 1-1/4" X 1/4", Washer; 21/32" X 1-1/4" X 1/4" Rockshaft Rows, Washer; 21/32" X 1-1/4" X 1/4" (Sub H154929, N371316 And N221966), Washer; 21/32" X 1-1/4" X 1/4" (2 - Hoe; 3 - Disk), Washer; 21/32" X 1-5/16" X .250", Washer; 16,6x32x6,4mm, Washer; (A) 21/32" X 1-1/4" X 1/4", Washer; 21/32" X 1-1/4" X 1/4", Washer; (Use With 19h1872 Or 19h1950)	8

See all parts with full part numbers in Heavy Parts AI →

Wing - Outer (47' Plow) [A14]

John Deere : 685 - Plow, Chisel : Wing - Outer (47' Plow) [A14]

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
19***12	Cap Screw; 5/8"X5-1/4", A=26,5mm, Cap Screw; (D) 5/8" X 5-1/4", Cap Screw; (B) 5/8" X 5-1/4", Cap Screw; (B) (C) 5/8" X 5-1/4", Cap Screw; (A) 5/8" X 5-1/4", Cap Screw; (C) 5/8" X 5-1/4", Cap Screw; 5/8"X5-1/4", Cap Screw; 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4", (For Use With 5 Or 6 Levers), Cap Screw; 5/8" X 5-1/4", (12-15 Ft., 16-20 Ft.)	8
AN***12	Structural Tubing	1
AN***56	Wing Frame; R.H., Wing Frame; 23' R.H. (Illustrated)	1

See all parts with full part numbers in Heavy Parts AI →

Wing - Outer (55' Plow) [A15]

John Deere : 685 - Plow, Chisel : Wing - Outer (55' Plow) [A15]

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
19***33	Cap Screw; 5/8" X 3-1/2" Drawbar, Cap Screw; 5/8" X 3-1/2", Auxiliary Hydraulic System, Cap Screw; 5/8" X 3-1/2" Main Frame Hinge, Cap Screw; 5/8" X 3-1/2", (8-Foot (2.44 M)), Cap Screw; (A) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", Front Extension Support, Cap Screw; (A: For 11 And 13 Standards) 5/8" X 3-1/2", Cap Screw; (5/8"X3-1/2"), Cap Screw; 5/8" X 3-1/2" 18'9" And 21'9", Cap Screw; (A) 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2", (With Differential Lock), Cap Screw; 5/8" X 3-1/2", (Used On 19 Ft.), Cap Screw; 5/8" X 3-1/2", (16 X 6 Disk) (8 X 12 And 10 X 10 Hoe), Cap Screw; 5/8" X 3-1/2", (Used On 19-Ft Model), Cap Screw; 5/8" X 3-1/2", (706 And 806), Cap Screw; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 5/8" X 3-1/2", Cap Screw; Ar 6-18(5/8"X3-1/2"), Cap Screw, Cap Screw; (A) 5/8"X4", Cap Screw; 5/8" X 3-1/2", (Without Markers), Cap Screw; 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", For 850, Cap Screw; 5/8" X 3-1/2", (Differential Lock), Cap Screw; 5/8" X 3-1/2" (For R64793), Cap Screw; 5/8" X 3-1/2", (Less Differential Lock), Cap Screw; (B) 5/8" X 3-1/2", Cap Screw; 15.875 X 88.900 mm (5/8" X 3-1/2"), Cap Screw; 5/8" X 3-1/2", (Use With R42332, R66649 Or R67903), Cap Screw; 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8), Cap Screw; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", (Use With (2) N135656), Cap Screw; (A: Not Used In U.S. And Canada) 5/8" X 3-1/2"	8
AN***12	Structural Tubing	1
AN***70	Wing Frame; R.H.	1

See all parts with full part numbers in Heavy Parts AI →

Wing Fold Hydraulics [B18]

John Deere : 685 - Plow, Chisel : Wing Fold Hydraulics [B18]

19***32	Screw; 3/8" X 1-1/4", (Single-Range) (100 Per Cent Beater Speed), Screw; 3/8" X 1-1/4" Rh, Screw; 3/8" X 1", Screw; 3/8" X 1-1/4" (Use With Ar54556), Screw; 3/8" X 1-1/4", (Na-D), Screw; 3/8" X 1-1/4", (Lower Holes), Screw; 3/8" X 1-1/4" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Screw; 3/8" X 1 1/4", Screw; 3/8" X 1-1/4", (Use With R52288 Or R81927), Screw; 3/8" X 1-1/4", Use With Furrower, Screw; 3/18" X 1-1/4", Screw; 3/8x1-1/4", Screw; (A) (B) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (Per Plate) (Use With H119094), Screw; 3/8" X 1-1/4", (22 Used, Variable Drive; 26 Used, Long), Screw; 3/8" X 1-1/4", (Rs, Ut), Screw; 3/8" X 11/4", Screw; 3/8" X 1-1/4" (Use With 12h304), Screw; 3/8" X 1-1/4", 3/8" X 1 1/4", Screw; 3/8" X 1-1/4", (For Kohler Engine), Screw; 3/8" X 1-1/4", For 14 Harrow, Screw; 3/8" X 1-1/4", (Sidehill), Screw; 3/8" X 1-1/4" (2 Used, Belt Drive; 1 Used, Hydrostatic Drive), Screw; 3/8" X 3-1/4" (Sub For 19h2458), Screw; X 3/8" X 1" (Sub For 03h1519), Screw, Screw; 3/8" X 1-1/4", Use With Furrower Only, Screw; (A: W/O Sgb) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (Per Wheel), Screw; (A) 3/8" X 1-1/4", Screw; 3/8"X1-1/4", Screw; 3/8"X1-1/4" (Sub For 19h988), Screw; 3/8"X1"-1/4" (Sub For 19h988), Screw; 3/8" X 1-1/4" (2 Used-Belt Drive; 1 Used-Hydrostatic Drive), Screw; 3/8" X 1-1/4", (Use With Ar54556), Screw; 3/8" X 1-1/4", (Sub For F2273r), Screw; (A: For Drill With Odd Number Of Rows) 3/8" X 1-1/4" (Tru-Vee), Screw; 3/8" X 1-1/4", For Mounting Compressor Drive Pulley, Screw; 3/8" X 1-1/4", (Variable Drive), Screw; 3/8"X1-1/4, Screw; 3/8" X 1-1/4", Dual, Screw; 3/8" X 1-1/4", For 15 Harrow, Screw; 3/8"X1"-1/4", Screw; (A) 3/8"X1-1/4", Screw; 3/8" X 1-1/4", (Use With N157426), Screw; 3/8" X 1-1/4" (Rh), Screw; 3/8" X 1-1/4" 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (R.H. Footrest To Clutch Housing), Screw; 3/8" X 1-1/4", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Screw; 3/8" X 1-1/4", (Per Plate), Screw; 3/8"X11/4", Screw; 3/8" X 1-1/4", (4 Used Gasoline And Diesel) (2 Used Lp-Gas), Screw; 3/8" X 1-1/4" (Extension), Screw; 3/8" X 1-1/4", (Front), Screw; 3/8" X 1-1/4" (Use With 14h812 And 24h1305), Screw; 3/8" X 1-1/4" 3/8" X 1 1/4", Screw; 3/8" X 1-1/4" (Sub For 19h1936), Screw; 3/8" X 1-1/4", Ord W/ (2) 12h304, Screw; (C) (D) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" (Use With Re502196), Screw; 3/8" X 1-1/4", (Sub For 19h2461), Screw; 3/8" X 1-1/4" (Use With 12h309 And 14h812), Screw; 3/8" X 1-1/4" 3/8"X1 1/4", Screw; (A) (C) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" (100 Per Cent Beater Speed) (Single-Range), Screw; (Or Ord 19m7786 (M10 X 30)), Screw; 3/8" X 1-1/4", Per Plate, (Use With H119096), Screw; 3/8"X1-1/4" (For L31065), Screw; 3/8" X 1-1/4" (3020e, 3020l), Screw; 3/8" X 1-1/4", (Use With Ar45917 Or R66684 On 3020&) (3020, 3020&), Screw; 3/8" X 1-1/4", (Dual), Screw; (A: Less Power Take-Off) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", Used With Furrowers, Screw; (A: (-Xxxxxx) 7710-0027; 7810-0092) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (Diesel), Screw; 3/8" X 1-1/4", (For Odd Row) (Tru-Vee), Screw; 3/8" X 1-1/4", For 15'3" Harrow, Screw; 3/8" X 1-1/4", (Syncro-Range), Screw; 3/8" X 1-1/4", (Modified 5200 And 5400), Screw; 3/8" X 1-1/4", (Use With 12h304 And 14h1076), Screw; 3/8"X3-1/4", Screw; 3/8"X1", Screw; 3/8" X 1-1/4" (Sub 19h3239), Screw; 3/8"X1-1/4" (For L32670), Screw; 9.525 X 31.750 mm, Screw; 3/8" X 1-1/4" (Use With N10215), Screw; 9.525 X 31.750 mm (3/8" X 1-1/4"), Screw; 3/8" X 1-1/4" (Per Plate), (Use With H119096), Screw; (B) 3/8" X 1-1/4", Screw; 3/8"X1-1/4" (Sub For L32504), Screw; 3/8" X 1-1/4", Right Rear Side Hole, Screw; (B) 3/8"X1-1/4", Screw; 3/8" X 1-1/4" 9 Standard, Screw; 3/8" X 1-1/4" (Use With 12h304), (Diesel), Screw; 3/8" X 1-1/4", (With Engine Coolant Heater), Screw; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Screw; 3/8" X 1-1/4", (Lower), Screw; 3/8" X 1-1/4" (675), Screw; 3/8" X 1-1/4", R.H. (Footrest To Clutch Housing), Screw; 3/8" X 1-1/2", Screw; X 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (16 Used, 6'; 24 Used, 8'), Screw; (B) 3/8" X 1-1/4", Control Support Side, Screw; 3/8" X 1-1/4" (Per Plate) (Use With H119095), Screw; 3/8" X 1-1/4" (Use With 14h812), Rear, Screw; 3/8" X 1-1/4", (Sub 19h3239), Screw; 3/8" X 1-1/4", (Power Front Wheel Drive), Screw; 3/8", Screw; (Code 1709), Screw; 3/8" X 1-1/4", (Use With Power Front Wheel Drive), Screw; Grid 1f15, Screw; 3/8" X 1-1/4" (Less Differential Lock), Screw; 3/8" X 1-1/4" (Use With 14h812), Screw; 3/8" X 1-1/4" (B), Screw; 3/8" X 1-1/4", (47-Foot Boom), Screw; 3/8" X 1-1/4" (With Extension), Screw; 3/8"X1-1/4" (Sub For 19h1731), Screw; 3/8" X 1-1/4", (Sub For R2273r), Cap Screw; 3/8" X 1-1/4", Screw; (A: Used With Warning Lamp) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1", Screw; (A: Sound-Gard Body) 3/8" X 1-1/4", Screw; (B: W/O Sound-Gard Body) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" (Belt Drive), Screw; 3/8" X 1-1/4" (Hs, Sae 8), Screw; 3/8" X 1-1/4", Use With Furrower; For 4w, 6n, 6w, Screw; 3/8" X 1-1/4", Or Ord 19m7786 (M10 X 30), Screw; 3/8" X 1-1/4" (Use With 19h1732), Screw; 3/8" X 1-1/4" (Rear), Screw; 3/8" X 1-1/4" (3020, 3020&), Screw; 3/8" X 1-1/4", (Per Plate) (Use With H119095), Screw; 3/8" X 1-1/4" Sgb, Screw; 3/8" X 1-1/4" (Use With 14h812), (Extension), Screw; 3/8" X 1-1/4", Use With Furrowers Only, Screw; (C) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", For 10' And 12' Harrows, Screw; 3/8" X 1-1/4", (Sub For Ar45917) (3020&), Screw; 3/8" X 1-1/4", Runner Opener Only, Screw; 3/8"1-1/4", Screw; 3/8" X 1-1/4", (5200), Screw; 3/8" X 1-1/4", Screw; (B) 3/8"X1-1/4" (Sub For 19h988), Screw; 3/8" X 1-1/4" (Use With Ah227021), Screw; (C: 5303 (-00*07), 5403 (-00*42).) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (3.1 M (10-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Screw; 3/8" X 1-1/4", To Transmission Case, Screw; 3/8" X 1-1/4", (700), Screw; 3/8" X 1-1/4", (Use With Re502196), Bolt, Screw; 3/8"X1/4", Screw; 9.525 X 31.750 mm (3/8" X 1-1/4") (854a), Screw; 3/8" X 1-1/4", (2 Used, Variable Drive; 4 Used, Long), Screw; 3/8" X 1-1/4", (Use With 14h1076 And 12h304), Screw; X 3/8" X 1-1/4", Screw; (A) (Use With Ar82453), Screw; 3/8" X 1-1/4" 3/8 Unc-2a X 1 1/4 A17d Zn, Screw; 3/8" X 1-1/4", (3014), Screw; 3/8" X 1-1/4", (From Exhaust Manifold), Screw; 3/8" X 1-1/4", (3006), Screw; 3/8" X 1-1/4", Used With Furrower On 8-Row And 12-Row	4
24***39	Washer; (A: Use With Conversion From Niehoff To Motorola Alternator For 8450 Prior To Serial No. 00*86) 11/16" X 1-1/4" X 0.105", Washer, Washer; 11/16" X 1-1/4" X 0.105", (No Longer Required), Washer; .105" X 11/16" X 1-1/4", Washer; 11/16" X 1-1/4" X 0.105" (B), Washer; 11/16" X 1-1/4" X 0.105", (Sub For C1246r, This Application), Washer; 11/16" X 1-1/4" X 0.105" Rh, Washer; 11/16" X 1-1/4" X 0.105", 1 Per Wheel With More Than One Weight, Washer; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 11/16" X 1-1/4" X 0.105", Washer; 21/32"X1-1/4"X.120", Washer; 11/16" X 1-1/4" X .105", Washer; (C) 11/16" X 1-1/4" X 0.105", Washer; 17.475 X 31.750 X 2.667 mm (11/16" X 1-1/4" X 0.105"), Washer; 11/16" X 1-1/4" X 0.105" (C), Washer; (A: Not Used In U.S. And Canada) 11/16" X 1-1/4" X 0.105", Washer; 11/16" X 1-1/4" X 0.105", Washer; (B) 11/16" X 1-1/4" X 0.105", Washer; 11/16" X 1-1/4" X 0.105" 1 Per Wheel With More Than One Weight, Washer; (A: For 9650 (7001- ) & 9750 (7001- )) 11/16" X 1-1/4" X 0.105", Washer; (A: For 9650 ( -7000) & 9750 ( -70**00)) 11/16" X 1-1/4" X 0.105", Washer; (A) 11/16" X 1-1/4" X 0.105", Washer; X 11/16" X 1-1/4" X .105", Washer; 11/16" X 1-1/4" X 0.105", Used With Strap N240536 Only, Washer; 11/16" X 1-1/4" X 0.105", (714, 716), Washer; 11/16" X 1-1/4" X 0.105", (Sub For M42114), Washer; 11/16" X 1-1/4" X 0.105", (4, 8, 12, 16 Or 20 Quik-Tatch Weights), Washer; 11/16"X1-1/4"X.105", Washer; (B) 11/16" X 1-1/4" X 0.105"	0
A4***28	Orifice, Orifice; 1.574 mm (.062")	1
AA***68	Hydraulic Hose; (E) 3/4" X 7 493 mm (295") X 3/4", Hydraulic Hose; 1/2" X 295", Hydraulic Hose; 3/4" X 7493 mm X 3/4" 15' Mf, 10' Wing), Hydraulic Hose; 3/4" X 7493 mm X 3/4", Hydraulic Hose; (H: 15' Mf, 10' Wing), Hydraulic Hose; 3/4" X 7 493 mm (295") X 3/4", 14-Bottom	1

See all parts with full part numbers in Heavy Parts AI →

Wing Frame Tandem Wheel Support [A24]

John Deere : 685 - Plow, Chisel : Wing Frame Tandem Wheel Support [A24]

03***17	Bolt; (A: 11 Foot Main Frame And All Wings.) (C: All Wings Xxxx-) 1" X 6", Bolt; (A) 1" X 6", Bolt; 1" X 6"	1
14***02	Nut; (B: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4", Slotted, Fine Thread, Nut; 1/4", Nut; 3/4" 3/4" Slotted, Nut; 3/4" 3/4", Slotted, Nut; 3/4", Unf, Nut; (C: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4'(For Al34936), Nut; 3/4" (Slotted), Nut; 3/4" 2wd, Nut; (A: Slotted) 3/4", Nut; 18mm, Nut; 3/4", (Slotted), Nut; 3/4", (Sub 14h1086), Nut; 3/4" 3/4", Nut; 3/4", Unf., Nut; 5/8", Nut; Slotted, Nut; 3/4" 3/4" Unf, Nut; No. 0.210, Nut; 3/4", Nut; 3/4", (U/W Heavy Duty Dual Axle), Nut; 3/4" Hex Slotted, Nut; (A: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4"(For Al34935), Nut; (A), Nut; (A) 3/4", Nut; (A) (B) 3/4", Nut; Rh, Lh, Nut; 19.050 mm (3/4") 3/4", Slotted, Nut; 3/4" (Sub 14h902,This Application And11h237), Nut; 3/4', Slotted, Nut; 5/8", Rh, Lh, Nut; (B: (Regular Duty) Two-Wheel Drive) (C: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/8", Td, Nut; 5/8" Rh, Lh, Nut; (A: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4" (Use With An232006), Nut; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 3/4", Nut; 3/4", Unf, Slotted, Nut; 19.050 mm (3/4"), Nut; 3/4" Slotted, Nut; 3/4" Unf, Nut, Nut; 3/4" Unf, Slotted, Nut; Rh, 5/8", Nut; 19.050 mm (3/4") (Sub 14h1086), Nut; 3/4" (Sub For 14h904, This Application) (Use With 11h237), Nut; 3/4", Slotted, Unf, Nut; 3/4", Slotted, Nut; 3/4" Unf Slotted	2
AN***18	Support; (Sub An232662), Support	1
AN***62	Support, Support; (C: All Wings Xxxx-), Support; (A: 11 Foot Main Frame And All Wings.) (Sub For An231318, This Application)	1

See all parts with full part numbers in Heavy Parts AI →

Wing Rockshaft Cylinder Anchor [A21]

John Deere : 685 - Plow, Chisel : Wing Rockshaft Cylinder Anchor [A21]

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
14***73	Nut; 31.750 mm (1-1/4") Jam, Nut; 1-1/4", Nut, Nut; 1-1/4" (A), Nut; 1-1/4", Jam, Nut; (A: 12'-6" To 27'-6") 1-1/4", Nut; 1-1/4" Jam, Nut; 1-1/4", Nut; (A) 1-1/4", Nut; 1-1/4" Model 12w And 16n	3
19***24	Cap Screw; 5/8" X 2-1/4", Use When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" R.H. Side Only, Cap Screw; 5/8" X 2-1/4", Required To Connect Unit To Parallel Arms, Cap Screw; 5/8 X 21/2-In., Cap Screw, Cap Screw; 5/8" X 2-1/4", (Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Front Axle), Cap Screw; 5/8" X 2-1/4" (2940, 3030, 3040, 3130, 3140 (37*06-)) (2950, 2955, 3050, 3350), Cap Screw; 5/8" X 2-1/4", Use With N212983 When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Use With Extension, Cap Screw; 5/8" X 2-1/4", (Sub For 19h1734) This Application Only, Cap Screw; (D) 5/8" X 2-1/4", Cap Screw; (B) 5/8" X 2-1/4", Cap Screw; 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Use With 12h294), Cap Screw; (H: Also Use On 4050e And 4250e) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Rh Side Only, Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4", (Used With Wheel Spacers), Bolt, Cap Screw; (C) (G) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Used With Sheel Spacers), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70**00)) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Wing Frame Only, Cap Screw; 5/8" X 2-1/4", Rear Position - 530, 630, 520, 50 Or 60 Tractors; Front Position - 730, 720, Or 70 Tractors., Cap Screw; 5/8" X 2-1/4", (Use When Hitch Is Lowered), Cap Screw; (C) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Planetary Final Drive), Cap Screw; 5/8" X 2-1/4" (To Front Axle Support), Cap Screw; 5/8" X 2-1/4" (Used With Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Cylinder Block), Cap Screw; 5/8" X 2-1/4" (To Cylinder Block), . Bolt, Cap Screw; 15.875 X 57.150 mm	4
24***68	Washer; 21/32" X 1-5/16" X 0.090", 9-Inch Only, Washer; 21/32" X 1-5/16" X 0.090", (On Base Unit), Washer; 21/32" X 1-5/16" X 0.090", Either Side Of Sheave For Alignment, Washer; 21/32" X 1-5/16" X 0.090", For 790 Rear, Washer; 21/32" X 1-5/16" X 0.090", (8 Nominal), Washer; 21/32" X 1-5/16" X 0.090", 8-Row Wide, Washer; (A: Dubuque (To) Esn -74*89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; (A: Dubuque (T0) Esn -7489) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Washer; (A) 21/32"X1-5/16"X.090", Washer; .090" X 21/32" X 15/16", Washer; 21/32" X 1-5/16" X 0.090" 3 Each Maximum, Used On E93102, Washer; 21/32" X 1-5/16" X 0.090", (Sub For E14416, This Application), Washer; 21/32" X 1-5/16" X 0.090" 21/32" X 1-5/16" X 0.090", Washer; 21/32"X1-1/16", Washer; 21/32" X 1-5/16" X 0.090", 12-Row Narrow, Washer; (B) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X .090", Washer; 21/32" X 1-5/16" X 0.090", Rear, For 79, Washer; 21/32x1-1/16", Washer; 21/32" X 1-5/16" X 0.090", (Use With 08h4073), Washer; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; 16.662 X 33.325 X 2.286 mm (21/32" X 1-5/16" X 0.090"), Washer; (A) (B) (C) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", R.H., Washer; 21/32" X 1-5/16" X 0.090", (Rs), Washer; 21/32" X 1-5/16" X 0.090", 230 mm (9") Only, Washer; .090 X 21/32 X 1-5/16zn, Washer; 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Sub For E14416), Washer; 21/32" X 1-5/16" X 0.090", (203 cm-259 cm (80"-102") Axle), Washer; (B: Dubuque (T0) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Sub For Mg87365), Washer; 21/32" X 1-5/16" X 0.090", (No Longer Available), Washer; 21/32" X 1-5/16" X 0.090" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922-7 Used; 925-8 Used; 930-10 Used; And 930 Flex Arg-1 Used), Washer; (C) 21/32" X 1-5/16" X 0.090", Washer; (E) (A) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" (8 Nominal), Washer; (A: Outer Wing Caster Wheel Spring Brake For 52 Ft Machine Only.) 21/32" X 1-5/16" X 0.090", Washer; 21/32"X1-5/16"X.090", Washer; 16.662 X 33.325 X 2.286 mm, Washer; 21/32" X 1-5/16" X 0.090", 8-Row Wide And 10-Row Narrow, Washer; 21/32" X 1-5/16" X 0.090" 5/8", (Sub For Mg87365), Washer; 21/32" X 1-5/16" X 0.090" (Sub For E14416), Washer; (A) (C) 21/32" X 1-5/16" X 0.090", Washer; (A) 21/32" X 1-5/16" X 0.090", (8 Nominal), Washer; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 21/32" X 1-5/16" X 0.090", Washer; (A) (D) (E) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" R.H., Washer; 21/32" X 1-5/16" X 0.090" 8-Row, 36-, 38- And 40-In.; 10-Row, 30-In., Washer; (B: Dubuque (T0) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Not Included In Kit) (Sub For Mg87365), Washer; (B: Dubuque (To) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; (B: Dubuque (To) Esn -7489) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Use Without Rops), Washer; (B: Dubuque (To) Esn 7490-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090" 15 Ft, Washer; (D) 21/32" X 1-5/16" X 0.090", Washer; (B: Dubuque (T0) Esn 74**90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) 21/32" X 1-5/16" X 0.090", Washer; (D) (E) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090", (Without Rops), Washer; (B) (C) (D) 21/32" X 1-5/16" X 0.090", Washer; (A) (B) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-3/8" X .105", Washer, Washer; 21/32" X 1-5/16" X 0.090" 3 Max On Each Tooth Bar, Washers Not Needed W/Longer Boss, Washer; (A) 21/32" X 1-5/16" X 0.090", Washer; 21/32" X 1-5/16" X 0.090"	2

See all parts with full part numbers in Heavy Parts AI →

Wing Rockshaft [A20]

John Deere : 685 - Plow, Chisel : Wing Rockshaft [A20]

08***10	Bolt; (D: 12r38) 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (8 X 10 Frame), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Use With 8”X10” Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12") 8, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2", Bolt; 5/8"X12-1/2", Bolt; (A) 8, (5/8"X12"), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), 8"X10" Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8 (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8.(5/8"X12"), Bolt; 5/8" X 12-1/2", Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, Bolt; (D) (E) 5/8" X 12-1/2", Bolt; 5/8" X 12-1/2" U/W 8 X 10 Tube (Hs, Sae 8), Bolt; 5/8" X 12-1/2" Use With 8 X 10 Tube, (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (U/W 8 X 10) Tube (Hs, Sae 8)	4
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	4
24***48	Washer; (A) 1-1/32" X 1-1/2" X 0.120", Washer; 1-1/32" X 1-1/2" X 0.120" (A), Washer; 1-1/32" X 1-1/2" X 0.120", Washer; 26.187 X 38.100 X 3.048 mm, Washer; 1-1/32" X 1-1/2" X 0.120" (D), Washer, Washer; 1-1/32" X 1-1/2" X 0.120" (Sub For Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", (700), Washer; (A: For 9650 ( -70*00) & 9750 ( -7000)) 1-1/32" X 1-1/2" X 0.120", Washer; (Sub For (2) Mg272487), Washer; (Use With M150249 And M79152), Washer; 1-1/32" X 1-1/2" X 0.120" (Sub For (2) Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", 28 Ft, Washer; (A: Note; 9550 (7001- ) 9550sh (7001- )) 1-1/32" X 1-1/2" X 0.120", Washer; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1-1/32" X 1-1/2" X 0.120", Washer; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 1-1/32" X 1-1/2" X 0.120", Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For Et10714), Washer; 1-1/32" X 1-1/2" X 0.120", (750), Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For (2) Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120" (With 1" Pin), Washer; (A) 1-1/32" X 1-1/2" X 0.120" (K1) 35mm X 2.4mm (1.4" O.D. X .093" Thick) (Sub For (2) Mg272487)	0
AN***34	Bearing Cap; (Udes Jd7844 - Not Used In This Application), Bearing Cap, Bearing Cap; Upper	2

See all parts with full part numbers in Heavy Parts AI →

Need a specific 685 - PLOW, CHISEL part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.