John Deereplow, chisel(no series)

John Deere 680 - PLOW, CHISEL

Specifications · OEM parts breakdown

Search live 680 - PLOW, CHISEL parts Source or supply its parts

Post a parts request and compare supplier quotes.

John Deere 680 - PLOW, CHISEL specifications

Source specifications

Cutting platform width	30.02 ft / (9.15 m) c
Cylinder bore stroke length	N.A
Empty weight depending on equipment	N.A
Engine displacement	N.A
Length x width x height	N.A
Maximum engine torque	N.A
Maximum transport height	13.06 ft / (3.98 m) c
Maximum transport length	22.51 ft / (6.86 m) c
Maximum transport width	14.04 ft / (4.28 m) c
Minimum cutting length	N.A
Number of cylinders	N.A
Torque Revolution	N.A
Weight	N.A

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

680 - PLOW, CHISEL common service parts

Part number	Part	Notes
AN260207	Filter	Scheduled service item	Check fitment →
AE14428	Elbow Fitting	Scheduled service item	Check fitment →
U12547	O-Ring	Scheduled service item	Check fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

All 680 - PLOW, CHISEL assemblies by section

Every catalogued assembly group for the John Deere 680 - PLOW, CHISEL. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Caster Wheel Assembly

John Deere : 680 - Plow, Chisel : Caster Wheel Assembly

03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	6
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	2
14***76	Nut; 1" (B), Nut; 1" Jam, Nut; 1", Jam, Nut; 1" Hex Jam, Nut; 1", Nut; (A) 1", Nut; 1", Hex Jam, Nut; 1" (A) (B) (C), Nut; (Use With An204476), Nut; 1", (Sub For N209287), Nut; 25.400 mm (1") Hex Jam, Nut, Nut; (B: Quantities Shown Are For One Unit. Two Units Used Per Machine, Except Those Identified With An (A).) 1", Nut; 1" (Sub For N209287)	1
14***62	Nut; 1", No Longer Required, Nut; 1", Nut; 1", (Sub P49591), Nut; 25.400 mm (1"), Nut; (B) 1"	1

See all parts with full part numbers in Heavy Parts AI →

Cylinder Anchor

John Deere : 680 - Plow, Chisel : Cylinder Anchor

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	1
19***10	Cap Screw; 15.875 X 44.450 mm (5/8" X 1-3/4"), Cap Screw; (A: For 9650 ( -69*00) & 9750 ( -6900)) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8) Wide Only, Cap Screw; 5/8" X 1-3/4" Rh, Cap Screw; 5/8" X 1-3/4" (Sub For (4) Mg9627896), Cap Screw; 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4" 5/8" X 1 3/4", Cap Screw; 5/8" X 1-3/4" Hs, Sae 8, Cap Screw; 5/8"X1-3/4" (Sub For 19h1833), Cap Screw; 5/8" X 1-3/4" (Sae 8), Cap Screw; 5/8" X 1-3/4" (Use With Ar52584), Cap Screw; 5/8" X 1-3/4", Torque To 175 Lb-Ft (240 N-M), Cap Screw; 5/8" X 1-3/4", Cap Screw; 5/8"X1-3/4", Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8) Narrow Only, Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8), Cap Screw; (A: 9550 ( -6900) 9550sh ( -6900)) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4" Install Using Never Sieze On Threads, Torque To 170 Lb-Ft (230 N-M), Cap Screw; 15.875 X 44.450 mm (5/8" X 1-3/4"), Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8) Full Thread, Cap Screw; (B: (Xxxxxx- ) 7710-0077; 7810-00*09) 5/8" X 1-3/4", Cap Screw; Hs, Sae 8, 5/8" X 1-3/4"	2
19***74	Cap Screw; (D) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Sub For 19h3353), Cap Screw; (A) (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 11 Thru 27-Foot Machines), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 23 Thru 27-Foot Machines), Cap Screw; (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" Lh, Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; (A) (B) (C) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Use With 14h800), Cap Screw; 5/8" X 5-1/4", Cap Screw; 5/8"X5-1/4", Cap Screw; 5/8" X 5-1/4", Shear Bolt, Hs, Sae 8; Standard Spacing - 510 mm (20") Only, Cap Screw; 5/8" X 5-1/4", (Hs, Sae 8) (For Use With 5 Or 6 Levers), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8) (For 23' Thru 28'4" Machines)	2
A5***92	Bushing; 45 Ft, 53 Ft And 61 Ft, Bushing; For 1-1/4" Pin, 41', Bushing, Bushing; (1-1/4" Pin), Bushing; 1-1/4" I.D., Bushing; 57' And 61', Bushing; For 1-1/4" Pin, Bushing; 1-1/4" I.D. 41', Bushing; 1.502" X 1.525" X 1"	1

See all parts with full part numbers in Heavy Parts AI →

Cylinder Rod End

John Deere : 680 - Plow, Chisel : Cylinder Rod End

19***21	Cap Screw; (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (20'-9" Through 32'-1"), Cap Screw; 3/8" X 5/8", (A/C Adapted To Pressurized Cab), Cap Screw; 3/8" X 5/8" (17'-1" And 18'-3"), Cap Screw, Cap Screw; 3/8"X5/8", Cap Screw; (C) 3/8" X 5/8", Cap Screw; (B: Engine Serial No.) (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (2 Used For 714, 714a; 6 Used For 716, 716a), Cap Screw; 3/8" X 5/8" (8630, 5460, 5820) (Cylinder Head), Cap Screw; (D) 3/8" X 5/8", Cap Screw; 308"X5/8", Cap Screw; (A: ( -Xxxxxx) Esn 4650-32*14; 4850-32*45) (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8" (Use With Ar76766), Cap Screw; (A: For Switzerland Only) 3/8" X 5/8", Cap Screw; (B: W/ Right Hand Exit Door) 3/8" X 5/8", Cap Screw; (B: Engine Wiring Harness Al111609, With Fuel Preheater On R.H. Side) 3/8" X 5/8", Cap Screw; (B) 3/8"X5/8", Cap Screw; 3/8" X 5/8", (Dry Type Air Cleaner), Cap Screw; 3/8" X 5/8", Used With Stationary Air Screen, Cap Screw; 3/8" X 5/8", (Air Cleaner To Water Outlet Manifold) (Use With Re28156), Cap Screw; 3/8" X 5/8", (Sub R44302), Cap Screw; (A) 3/8" X 5/8", Cap Screw; 9.525 X 15.875 mm (3/8" X 5/8"), Cap Screw; 3/8" X 5/8", (A/C Factory Installed), Cap Screw; 3/8" X 5/8", (Sub For Mg88703), Cap Screw; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (1 Used Single Battery) (2 Used Dual Battery), Cap Screw; (A: Engine Wiring Harness Al81909, With Fuel Preheater On L.H. Side) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (Sub T56055), Cap Screw; 9.525 X 15.875 mm, Cap Screw; 3/8" X 5/8", Europe, Cap Screw; 3/8" X 5/8", (Use With R108622), Cap Screw; 3/8" X 5/8" (Use With 14h812), Cap Screw; 3/8" X 5/8" With Air Conditioning, Cap Screw; 3/8" X 5/8", (Sub For 12h304 And 19h2021, This Application), Cap Screw; 3/8" X 5/8", (Use With R121694), Cap Screw; (B) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (Air Cleaner To Water Outlet Manifold) (Use With Ar76766), Cap Screw; 3/8" X 5/8", With Stationary Air Screen, Cap Screw; 3/8" X 5/8", 5720 Model Only, Cap Screw; (A) (C) 3/8" X 5/8", (Sub For T16516), Cap Screw; 3/8" X 5/8", (Use With R57516), Cap Screw; 3/8" X 5/8", Used With Rotary Air Screen, Cap Screw; (C) 3/8"X5/8", Cap Screw; 3/8" X 5/8", North America, Cap Screw; 3/8" X 5/8", Cap Screw; (A) (B) (C) 3/8" X 5/8", Cap Screw; 3/8" X 5/8" (Sub T56055), Cap Screw; (A) 3/8"X5/8", Cap Screw; 3/8" X 5/8", (32 Used For 714, 714a; 38 Used For 716, 716a), Cap Screw; 3/8"X2-5/8", Cap Screw; 3/8" X 5/8", With Rotary Air Screen, Cap Screw; 3/8", Cap Screw; (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8" (Use With Re28156)	1
19***10	Cap Screw; (B) 7/8"X6" (Sub For R34828), Cap Screw; 7/8" X 6" 7/8" X 6", (Sub For R32225 Or R34828), Cap Screw; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer) 7/8" X 6", Cap Screw; 7/8" X 6", (Use With R32230, R52770, F1478r Or F1500r) (Sub For R34828), Cap Screw; 7/8" X 6", Cap Screw; 7/8" X 6", (Sub For R32225 Or R34828), Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) 7/8" X 6", Cap Screw; (A) 7/8" X 6", (Sub For R34828), Cap Screw; 7/8" X 6", (Sub For R34826), Cap Screw; 7/8" X 6" (Sub For R34828), Cap Screw; (Sub For R34828), Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) 7/8" X 6", Cap Screw; 7/8" X 6" 7/8" X 6", (Sub For A4387r Or R34828) (Use With F1478r, F1500r, F1590r, R21480, R31610 Or R31620), Cap Screw; 7/8" X 6", (19 And 23-Foot Vertical Fold), Cap Screw; 7/8" X 6", (With Truss Rods), Cap Screw, Cap Screw; 7/8"X6" (Sub For R34828), Cap Screw; (A) 7/8" X 6", Cap Screw; (B) 7/8" X 6" (Sub For R34828), Cap Screw; 7/8" X 6", (Sub For R34828)	1
A3***34	Bushing, Bushing; 4"	1
K4***17	Lock Nut; (Spring Reset), Lock Nut; 4.6 M (15 Ft.), Lock Nut; 22.225 mm (7/8") (For Single Lift Cylinder And Mechanical Depth Control), Lock Nut; 7/8", (Sub For W22936), Lock Nut; (Sub For 14h836), Lock Nut; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) (D: Mainframe, (5 Section) Singlepoint), Lock Nut; 22.225 mm (7/8"), Lock Nut; (7 X 7 Frame - Spring Reset), Lock Nut; 22.225 mm (7/8") (Sub For W22936), Lock Nut; 22.225 mm (Spring Reset), Lock Nut; 7/8", (For Single Lift Cylinder And Mechanical Depth Control), Lock Nut; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer), Lock Nut; 7/8", (Sub For Bt498a Or W22936), Lock Nut; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) (D: Main Frame (5 Section) Single Point), Lock Nut; 22.225 mm, Lock Nut; 7/8", Lock Nut, Lock Nut; 6.1 M (20 Ft.), Lock Nut; 22.225 mm (7 X 7 Frame) (Spring Reset)	1

See all parts with full part numbers in Heavy Parts AI →

Caster Wheel Turnbuckle (Floating Hitch)

John Deere : 680 - Plow, Chisel : Caster Wheel Turnbuckle (Floating Hitch)

14***73	Nut; 31.750 mm (1-1/4") Jam, Nut; 1-1/4", Nut, Nut; 1-1/4" (A), Nut; 1-1/4", Jam, Nut; (A: 12'-6" To 27'-6") 1-1/4", Nut; 1-1/4" Jam, Nut; 1-1/4", Nut; (A) 1-1/4", Nut; 1-1/4" Model 12w And 16n	1
14***07	Nut; 1-1/4" Lh Thread, Nut; 1-1/4", Nut; 1-1/4", L.H. Thread	1
24***54	Washer; 1-1/32" X 2" X 0.060", 3.7 M (12'), Washer; 1-1/32" X 2" X 0.060", Washer; 1-1/32" X 2" X 0.060" (Sub For N280201), Washer; 1-1/32" X 2" X 0.060", (Sub 24h252) This Application Only, Washer; 1-1/32" X 2" X 0.060", 4.6 M (15'), Washer; 1-1/32" X 2" X 0.060" Use To Shim Truss Tube, Washer, Washer; 1-1/32" X 2" X 0.060" (Use With A63551)	6
A2***49	Eyebolt; Rh Thread, Eyebolt; R.H. Thread, Eyebolt; Leveling, Eyebolt	1

See all parts with full part numbers in Heavy Parts AI →

Decals

John Deere : 680 - Plow, Chisel : Decals

AN***59	Decal Kit; (Sub For Aa32091) Model Number Repair, Decal Kit; Model Designation Repair Kit, Decal Kit, Decal Kit; (Sub For Aa32091) Model Repair Number, Decal Kit; Model Number Repair, Decal Kit; (Sub For Aa32091)Model Designation Repair Kit, Decal Kit; (Sub For Aa32091) Model Designation Repair Kit, Decal Kit; (Sub For Aa32091)Model Number Repair, Decal Kit; (Sub For Aa32091)Model Number Repair Kit (75 mm), Decal Kit; Model Number Repair, (Sub For Aa32091), Decal Kit; Kit, Model Number Repair, (Sub For Aa32091), Decal Kit; (Sub For Aa32091) Kit, Model Number Repair, Decal Kit; Model Designation Repair Kit, (Sub For N260646 Or Aa32091), Decal Kit; Kit, Model Number Repair, Decal Kit; Model Number Repair Kit (Sub For Aa32091)	1
AN***15	Decal Kit; (Sub For An260043, An233186 Or An233873)French, Decal Kit; (Sub For An260043, An233873 Or An233186) French, Decal Kit, Decal Kit; (Sub For An260043, An233186 Or An233873) French, Decal Kit; (Sub For An260043) (Sub An233873 Or An233186) French, Decal Kit; Misc. Tillage (French), (Sub For An260043, An233873 Or An233186), Decal Kit; (Sub For An260043, An233186 Or An233873)French (Includes Decals Marked (A)), Decal Kit; (Sub For An260043, An233873 Or An233186)French	1
AN***17	Decal Kit; (Sub For An231386, An233187 Or An233874)Spanish, Decal Kit, Decal Kit; (Sub For An231386, An233187 Or An233874) Spanish, Decal Kit; (Sub For An231386, An233874 Or An233187) (Spanish), Decal Kit; (Spanish), (Sub For An231386, An233187 Or An233874)	1
JD***21	Label; (G: Yellow) (H: Front Outer), Label; (A) Yellow, Label; (Sub For Jd5906)Yellow Reflector, Label; (D: Yellow) (A), Label; Amarelo/Amarillo/Yellow, Label; 50mm X 230mm Yellow, Label; Amber, Label; (E: Color: Yellow) Lgth = 230 X 50 mm, Label; (D) R.H. And L.H., Label; (B: Red), Label; Yellow (Front Outer), Label; (A) (C), Label; (Amber) (Sub For Jd5905, This Application) (Cut To Fit), Label; (A) Amber, Label; Yellow, (Sub For Jd5925 And Jd5583), Label; (F: Yellow), Label; Yellow (On Front Of Mounting Plate), Label; (A: Extension), Label; (H: Extension) Rh And Lh, Label; (B: Amber) 2" X 6.3", Label; (E: Yellow) (H: Front Outer), Label; (A: Color: Yellow), Label; Yellow (50 X 230), Label; Amber Reflector, Label; (D: Yellow), Label; (H: Yellow), Label; (D: Yellow) (G: Front Outer), Label; Yellow Reflector, Label; (F: Yellow) (I: Front Outer), Label; (Amber) (Front Of Top Beam 2-Inch From L.H. End And Top Front Of L.H. And R.H. Plate) (Kit Ah100289), Label; Yellow (Left Hand Front Only), Label; (H: Yellow (Front Outer)), Label; (B: Xxxxxx- 446(13*64) 546(1320)) Yellow, Label; (A) (B) Yellow (50 X 230), Label; Orange, Label; (Sub For Jd5906)Amber, Label; (C: (Xxxxxx- ) 14'(1301- ) 16'(1301- ) 18'(1301- )) (B) Yellow, Label; Yellow (Use Under Decal On Side Of Unit On All Folding Planters Where Visible From Sides When Transporting; Use On Side Brackets On First And Last Row Units Of Front-Folding Planters) (Visible From Front When Tronsporting), Label; (A: Amber Light And Bracket Assembly) Amber, Label; (50 X 230) Yellow (On Front Of Marker Plate), Label; 50 X 230 mm Amber, Label; (50 X 230) Yellow, Label; (D: Amber) 50 X 230 mm, Label; (C), Label; (B: Yellow) 50mm X 230mm, Label; Yellow, Label; (A: 9550 (6901- ) 9550sh (6901- )), Label; (F: Amber Reflector), Label; (Sub For A50290)Amber, Label; (A: For 9650 ( -6900) & 9750 ( -6900)) Yellow, Label; (A), Label; 50" X 230", Reflective, Yellow, Label; Yellow, (Use Under Decal On Side Of Unit On All Folding Planters Where Visible From Sides When Transporting; Use On Side Brackets On First And Last Row Units Of Front-Folding Planters) (Visible From Front When Tronsporting), Label; (E: Yellow (Front Outer)), Label; Yellow (On Front Mounting Plate), Label; (Amber) (Front Of Top Beam 2-Inch From L.H. End, And Top Front Of L.H. And R.H. Plate) (Kit Ah100289) (Sub Jd5905), Label; (A: Yellow), Label; (Yellow) (Cut To Fit), Label; Label Reflective (Yellow) On Front Of Plate Opposite Red Label, Label; (A: For (6901- ) & 9750 (6901- )), Label; (B: Amber) (Sub For A50290), Label; 50 X 230 Amber, Label; Amber - On Left-Hand Front Tube On Main Frame And On Front Of Marker Lights, Label; (Amber) (Sub For Jd5905, This Application) L.H. Only (Cut To Fit), Label; (A) Reflective Tape (Amber), Label; (D) Rh And Lh, Label; (A: Extension) Yellow, Label; "Yellow" Located On Brackets, Label; 50 X 230 Yellow, Label; (A: Amber Warning Light And Bracket Assembly) Amber, Label; (I: Yellow), Label; (A: For North America (French) Only) (B: For North America (English) Only) (C: Yellow), Label; Reflective, Yellow, 50" X 230", Label; (E: Yellow), Label; Yellow, (With Transport Option: 930d-11 Used; 936d-14 Used), Label; (Red), Label; (C: Yellow) (H: Front Outer), Label; Label Reflective (Yellow) (On Front Of Plate Opposite Red Label), Label; (B: Yellow), Label; (D: Extension) Rh And Lh, Label; (E: Amber Reflector), Label; (A: 9550 ( -6900) 9550sh ( -69**00)) Yellow, Label; (Sub For Jd5906) Amber Reflector, Label; "Amber" Reflective Tape; Located On Front L.H. Side Of Drill And On Marker Frame, Label; Yellow, Located On Front Of Arm, Label; (B), Label; (F: Amber), Label; (Sub For A50290) Amber, Label; (B) Yellow, Label; (J: Amber), Label, Label; (B: Yellow) (50 X 230), Label; (50 X 230 Yellow, Label; (B: Amber), Label; (Yellow), Label; Yelllow, Label; (I: Yellow) (G: Front Outer), Label; (H), Label; 50x230 Yellow, Label; (C: Yellow), Label; Yellow,50mm X 230mm, Label; Red, Label; (A) Label, Yellow	1

See all parts with full part numbers in Heavy Parts AI →

Depth Indicator

John Deere : 680 - Plow, Chisel : Depth Indicator

11***56	Cotter Pin; (Lift Assist Wheel), Cotter Pin; 8 X 50 mm, (Sub For T110927), Cotter Pin; 8 X 50 mm (0.315" X 1.969"), Cotter Pin; 8 X 50 mm, Cotter Pin; 8 X 50 mm (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (Sub A24072, This Application), Cotter Pin; 8 X 50 mm 7000 Series Tractors (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (With 1-1/4" Pin), Cotter Pin; (C) (D) 8 X 50 mm, Cotter Pin; (C) (D) (F) 8 X 50 mm, Cotter Pin; 8 X 50 mm Used On 1820 Drill To Secure Chain, Cotter Pin; (B: Used On 1820 Drill To Secure Chain) 8 X 50 mm	2
19***11	Cap Screw; 1/2" X 5", (Use With R49722), Cap Screw; 1/2"X5", Cap Screw; 1/2" X 5" Upper, Cap Screw; 1/2" X 5" (A), Cap Screw; 1/2" X 5", Cap Screw; 7/8"X3", Cap Screw; 1/2" X 5" (Upper), Cap Screw; 1/2" X 5", (Sub 19h2120), Cap Screw; 1/2" X 5", (Use With Adjustable Gauge Wheel), Cap Screw; 1/2" X 5" (Not Used With Fenders), Cap Screw; 1/2" X 5", (With Two Spacers), Cap Screw; (B: Ar107921 - Input Yoke Parts) 1/2" X 5", Cap Screw; 1/2" X 5", (Use With Adjustable Gauge Wheels), Cap Screw; 1/2" X 5"	2
19***93	Cap Screw; Hs, Sae8, 1/2" X 1-1/2", Cap Screw; (A) 1/2"X1-1/2" (Sub For T20139), Cap Screw; 1/2" X 1-1/2" Mount, Pump, Cap Screw; 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2" Already On Machine, Cap Screw; Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", Hs, Sae 8,, Cap Screw; 1/2" X 1-1/2" (Used With Single Selective Control Valve), Cap Screw; 1/2" X 1-1/2", (Sub For T20139) (Sub R46162, This Application), Cap Screw; 1/2" X 1-1/2", (1501,1504,1520,1521,1525,1529), Cap Screw; 1/2"X 1-1/2", Cap Screw; 1/2"X1-1/2" (Ord 19h3299), Cap Screw; 12.700 X 38.100 mm, (Sae 8), Cap Screw, Cap Screw; 1/2" X 1-1/2", (Without Turbocharger) (Use With T112996), Cap Screw; 1/2" X 1-1/2", (Sub For R74444) Code 1503 Flywheel, Damper Type Clutch, Cap Screw; 1/2 X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8 (Ha-G) (Sub For T20139) (Sub For R46162, This Application), Cap Screw; 1/2" X 1-1/2", For 4 648 mm (15') Harrow, Cap Screw; 1/2" X 1-1/2" (B), Cap Screw; 1/2" X 1-1/2" 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" Hs, Sae, Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For R58253, This Application) (1501, 1502, 1504 And 1505), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, Cap Screw; (A) (B) (C) 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2", (1501,1504,1512,1520,1521,1525), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162), Cap Screw; 1/2" X 1-1/2" (With Mechanical Front Wheel Drive), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2", (5 Used L.H.) (5 Used R.H.), Cap Screw; (A: 9550 (-69*00) 9550sh (-69*00)) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 1/2" X 1-1/2" (A), Cap Screw; 1/2" X 1-1/2", Torque To 88 Lb-Ft (120 N-M), Cap Screw; Hs, Sae 8, 1/2" X 1-3/4", Cap Screw; (A) 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" 8, 1/2" X 1-1/2" (Sub For R58253, This Application) Hs, Sae, Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1 1/2", Cap Screw; (Code 1302), Cap Screw; (B) (C) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2" (Sub For Cb01390891), Cap Screw; 1/2" X 1-1/2" (Hs, Sae 8) (Use With N161501), Cap Screw; 1/2" X 1-1/2", (Hs Sae 8), Cap Screw; (A: Incld In Cb11434198 Fan) 1/2" X 1-1/2" Torque To 80 Ft-Lbs, Cap Screw; 1/2" X 1-1/2", Connects Chain To Frame, Cap Screw; 1/2" X 1-1/2", (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sub For 19h1721), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (Sub For T20139) (Sub For R46162, This Application), Cap Screw; (A) 1/2"X1-1/2", (Sub For 19h3025), Cap Screw; 12.700 X 38.100 mm (1/2" X 1-1/2") (Sub For Ffsb107101), Cap Screw; 1/2" X 1-1/2", Cap Screw; (A) 1/2" X 1-1/2", Cap Screw; 1/2" X 1-1/2", (Sub For R58253, This Application), Cap Screw; 1/2" X 1-1/2", Code 1503, (Sub For R74444, This Application), Cap Screw; 1/2" X 1-1/2", Torque To 115 Lb-Ft (155 N-M), Cap Screw; Hs, Sae 8, 1/2 X 1-1/2", Cap Screw; 1/2" X 1.1/2", Cap Screw; 1/2"X1-1/2", Cap Screw; 1/2" X 1-1/2" Hs. Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8 (1/2" X 1-1/2"), Cap Screw; 1/2" X 1-1/2", (1503) (Sub For R74444), Cap Screw; 1/2" X 1-1/2", (Sae 8), Cap Screw; 1/2" X 1-1/2" Hs, Sae 8, 1/2" X 1-1/2", Cap Screw; Hs, Sae 8, 1/2" X 1/2", Cap Screw; 12.700 X 38.100 mm, Incld In 1, Cap Screw; 1/2" X 1-1/2", (2 Used L.H.) (2 Used R.H.), Cap Screw; Hs, Sae 8, 1/2" X 1-1/2", (1501,1502,1504,1505), Cap Screw; (A) 1/2" X 1-1/2" (Hs, Sae 8), Cap Screw; 1/2" X 1-1/2" (Sae 8), Cap Screw; 1/2"X1-1/2" (Ord 19h2473, R109086), Cap Screw; 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; (A) 1/2"X1-1/2" (Sub For 19h3025), Cap Screw; 1/2" X 1-1/2", (Sub R84978 And R109086, This Application), Cap Screw; 12.700 X 38.100 mm, Cap Screw; 1/2" X 1-1/2", Hs, Sae 8, Cap Screw; 12.700 X 38.100 mm, Already On Machine	2
24***11	Washer; (B: 2.4 M (96 In.)(8 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; 17/32"X1-1/16", Washer; 1/2", Washer; 17/32" X 1-1/16" X 0.090", (650), Washer; 13.487 X 26.975 X 2.286 mm (17/32" X 1-1/16" X 0.090") (694) (Thru Unused Holes In Floor Sheets), Washer; (B), Washer; (Nla), Washer; 17/32" X 1-1/16" X 0.090" (913-10 Used;915-12 Used; 918-14 Used; 920, 922, 924-16 Used; 925 And 930-22 Used), Washer; (A) (B) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (Use With Ar39137), Washer; 17/32" X 1-1/16" X 0.090" 0.562" X 1" X 0.048", Washer; 17/32" X 1-1/16" X 0.090", R.H., Washer; (Sub For Ffsb109341), Washer; 17/32" X 1-1/16" X 0.090", (3 Nominal), Washer; 17/32" X 1-1/16" X 0.090" Tow Behind, Washer; 17/32" X 1-1/16" X 0.090" (213-10;215 & 216-12;218-14; 220, 222, 224-16;230-22), Washer; 17/32" X 1-1/16" X 0.090" Use With (4) 19m7790, Washer; 17/32" X 1-1/16" X 0.090", (Used With Adjustable Sieve), Washer; 17/32" X 1-1/16" X 0.090", (Use With Adjustable Sieve), Washer; 17/32" X 1-1/16" X 0.090" 6-Row, 36-, 38- And 40-In.; 8-Row, 30-In. 8-Row, 70 cm, Washer; 17/32" X 1-1/16" X 0.090" (30"), Washer; (A: 12-Row/22") 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (Sub For D2865r), Washer; 17/32" X 1-1/16", Washer; (E) 17/32" X 1-1/16" X 0.090", Washer; 3/8" X 7/16", Washer; 17/32" X 1-1/16" X 0.090" 6 Ft., Washer; 17/32" X 1-1/16" X 0.090" (D), Washer; (W) (F) 17/32" X 1-1/16" X 0.090", Washer; 17/32"X1-1/16"X0.090", Washer; 17/32" X 1-1/16" X 0.090" (A), Washer; (C) 17/32" X 1-1/16" X 0.090", Washer; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", Idler, Washer; 17/32" X 1-1/16" X 0.090" (Lh Side), Washer; 17/32" X 1-1/16" X 0.090" (Use With (4) 19m7790), Washer; 17/32" X 1-1/16" X 0.090", (4 Used On Top Cap Screws; 2 Used On Bottom Cap Screws), Washer; 17/32" X 1-1/16" X 0.090" R.H., Washer; 13.487 X 26.975 X 2.286 mm (17/32" X 1-1/16" X 0.090"), Washer; (B) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (24 Used For 714, 714a; 28 Used For 716, 716a), Washer; (Rc And Hc), Washer; 17/32" X 1-1/16" X 0.090" (925 Flex Arg - 9 Used; 913-10 Used;915-12 Used; 918-14 Used; 920, 922-16 Used; 925, 930-22 Used; And 930 Flex Arg-20 Used), Washer; 17/32" X 1-1/16" X 0.090", (12 Used For 714, 714a; 14 Used For 716, 716a), Washer; (D: 3 M (120 In.)(10 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090" 9 Ft., Washer; (C: Part Of Ar109180 Adjustable Front Axle) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", 17 Teeth, Washer; 17/32" X 1-1/16" X 0.090", (750), Washer; 17/32" X 1-1/16" X 0.090" 178 mm (7") Dia., Washer; (A) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (Sub For Ffsb109341), Washer; .090"X17/32"X1-1/16", Washer; 17/32" X 1-1/16" X 0.090" (Sub 24h1853), Washer; 17/32" X 1-1/16" X 0.090", Washer; (A) 17/32" X 1-1/16" X .090", Washer; (C: 2.7 M (108 In.)(9 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; (B) (D) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0,090", Washer; (D) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", (Sub For Mg87364), Washer; 17/32" X 1-1/16" X 0.090", (U/W Adj. Sieve), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; 13.487 X 26.975 X 2.286 mm, Washer; 17/32" X 1-1/16" X 0.090" Lh, Washer; 17/32" X 1-1/16" X 0.090" (Rigid), Washer; 17/32"X1-1/16"X.090", Washer; 17/32" X 1-1/16" X 0.090" 7 Ft., Washer; 13.487 X 26.975 X 2.286 mm (17/32" X 1-1/16" X 0.090"), Washer; 17/32" X 1-1/16" X 0.090", 6-Row Wide; 8-Row Narrow; And 12-Row, 22", Washer; 17/32" X 1-1/16" X 0.090" (Use With Adjustable Sieve), Washer; 17/32" X 1-1/16" X 0.090", At Hinge Pins, Washer; (A) (B) (E) 17/32" X 1-1/16" X 0.090" (900, 911), Washer; 17/32" X 1-1/16" X 0.090" 8 Ft., Washer; 17/32" X 1-1/16" X 0.090" 10 Ft., Washer; 17/32" X 1-1/16" X 0.090" (1 Used, Diesel; 3 Used, Gasoline), Washer; 17/32" X 1-1/16" X 0.090" 17/32" X 1-1/16", Washer; 17/32" X 1-1/16" X 0.090" (694) (Thru Unused Holes In Floor Sheets), Washer; (A) 17/32" X 1-1/16" X 0.090", R.H. Front, Outside End And L.H. Front, Outside End, Washer; 17/32" X 1-1/16" X 0.090", Washer; (A) 17/32" X 1-1/16" X 0.090", R.H. Front, Outside End, Washer; 17/32" X 1-1/16" X .090", Washer; (A: 2.1 M (84 In.)(7 Ft.)) 17/32" X 1-1/16" X 0.090", Washer; 17/32" X 1-1/16" X 0.090", 6-Row Wide, 8-Row Narrow And 12-Row - 22-Inch, Washer; X X 17/32" X 1-1/16" X .090", Washer; (A) (B) 17/32" X 1-1/16" X 0,090", Washer, Washer; 17/32" X 1-1/16" X 0.090", 8-Row Wide, Washer; 17/32" X 11/16" X .090", Washer; 17/32" X 1-1/16" X 0.090", (36 Used For 714, 714a; 42 Used For 716, 716a)	2

See all parts with full part numbers in Heavy Parts AI →

Depth Control Hydraulics (11' Main Frame) (Multiple Cylinders) ( - 2482)

John Deere : 680 - Plow, Chisel : Depth Control Hydraulics (11' Main Frame) (Multiple Cylinders) ( - 2482)

11***56	Cotter Pin; (Lift Assist Wheel), Cotter Pin; 8 X 50 mm, (Sub For T110927), Cotter Pin; 8 X 50 mm (0.315" X 1.969"), Cotter Pin; 8 X 50 mm, Cotter Pin; 8 X 50 mm (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (Sub A24072, This Application), Cotter Pin; 8 X 50 mm 7000 Series Tractors (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (With 1-1/4" Pin), Cotter Pin; (C) (D) 8 X 50 mm, Cotter Pin; (C) (D) (F) 8 X 50 mm, Cotter Pin; 8 X 50 mm Used On 1820 Drill To Secure Chain, Cotter Pin; (B: Used On 1820 Drill To Secure Chain) 8 X 50 mm	1
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	0
19***04	Bolt; 3/8" X 5" (U/W 3.5" Loader Tubes), Bolt; 3/8" X 5" (Use With N187507), Bolt; 3/8" X 5", Bolt; 3/8"X5", Bolt; (B: (Xxxxxx- ) 4560-00*21; 4760-0079; 4960-0006) 3/8" X 5", Bolt, Bolt; 3/8" X 5", (Cab), Bolt; (B: (Xxxxxx- ) 4555-0100; 4755-0101; 4955-01*49) 3/8" X 5", Cap Screw; 3/8" X 5", Bolt; 3/8" X 5" (Use With Mg86634148), Bolt; (Use With 12h304 And 14h812), Bolt; 9.525 X 127 mm (3/8" X 5"), Bolt; 3/8" X 5", For 15'3" Harrow, Bolt; 3/8"X4-1/4", Bolt; (Use With 12h304 And 14h1076), Bolt; (C) 3/8" X 5", Bolt; 3/8" X 5", (Use With R58717), Bolt; 3/8" X 5" (Use With 14h812), Bolt; (A) 3/8" X 5", Bolt; 3/8" X 5", (Use With N187507), Bolt; 3/8" X 5", Use With N187507	0
19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	0

See all parts with full part numbers in Heavy Parts AI →

Depth Control Hydraulics (11' Main Frame) (Multiple Cylinders) (2843 - )

John Deere : 680 - Plow, Chisel : Depth Control Hydraulics (11' Main Frame) (Multiple Cylinders) (2843 - )

11***56	Cotter Pin; (Lift Assist Wheel), Cotter Pin; 8 X 50 mm, (Sub For T110927), Cotter Pin; 8 X 50 mm (0.315" X 1.969"), Cotter Pin; 8 X 50 mm, Cotter Pin; 8 X 50 mm (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (Sub A24072, This Application), Cotter Pin; 8 X 50 mm 7000 Series Tractors (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (With 1-1/4" Pin), Cotter Pin; (C) (D) 8 X 50 mm, Cotter Pin; (C) (D) (F) 8 X 50 mm, Cotter Pin; 8 X 50 mm Used On 1820 Drill To Secure Chain, Cotter Pin; (B: Used On 1820 Drill To Secure Chain) 8 X 50 mm	2
19***04	Bolt; 3/8" X 5" (U/W 3.5" Loader Tubes), Bolt; 3/8" X 5" (Use With N187507), Bolt; 3/8" X 5", Bolt; 3/8"X5", Bolt; (B: (Xxxxxx- ) 4560-00*21; 4760-0079; 4960-0006) 3/8" X 5", Bolt, Bolt; 3/8" X 5", (Cab), Bolt; (B: (Xxxxxx- ) 4555-0100; 4755-0101; 4955-01*49) 3/8" X 5", Cap Screw; 3/8" X 5", Bolt; 3/8" X 5" (Use With Mg86634148), Bolt; (Use With 12h304 And 14h812), Bolt; 9.525 X 127 mm (3/8" X 5"), Bolt; 3/8" X 5", For 15'3" Harrow, Bolt; 3/8"X4-1/4", Bolt; (Use With 12h304 And 14h1076), Bolt; (C) 3/8" X 5", Bolt; 3/8" X 5", (Use With R58717), Bolt; 3/8" X 5" (Use With 14h812), Bolt; (A) 3/8" X 5", Bolt; 3/8" X 5", (Use With N187507), Bolt; 3/8" X 5", Use With N187507	0
19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	0
24***45	Washer; 1-9/32" X 2" X 0.105" (A), Washer; 1-9/32" X 2" X 0.105" (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", Washer; .105" X 1-9/32" X 2", Washer; 1-9/32" X 2" X 0.105" (Used With 1-1/4" Pin), Washer; (B) 1-9/32" X 2" X 0.105", Washer; 32.537 X 50.800 X 2.667 mm (1-9/32" X 2" X 0.105"), Washer, Washer; (A: Up To Series 625 ( -06*43), 630 ( -0633)) 1-9/32" X 2" X 0.105", Washer; (A: Starting From Series Number 625 (0644- ), 630 (06*34- )) 1-9/32" X 2" X 0.105", Washer; 1-9/32" X 2" X 0.105" (With 1-1/4" Pin)	2

See all parts with full part numbers in Heavy Parts AI →

Depth Control Hydraulics (13' Main Frame)

John Deere : 680 - Plow, Chisel : Depth Control Hydraulics (13' Main Frame)

19***04	Bolt; 3/8" X 5" (U/W 3.5" Loader Tubes), Bolt; 3/8" X 5" (Use With N187507), Bolt; 3/8" X 5", Bolt; 3/8"X5", Bolt; (B: (Xxxxxx- ) 4560-00*21; 4760-0079; 4960-0006) 3/8" X 5", Bolt, Bolt; 3/8" X 5", (Cab), Bolt; (B: (Xxxxxx- ) 4555-0100; 4755-0101; 4955-01*49) 3/8" X 5", Cap Screw; 3/8" X 5", Bolt; 3/8" X 5" (Use With Mg86634148), Bolt; (Use With 12h304 And 14h812), Bolt; 9.525 X 127 mm (3/8" X 5"), Bolt; 3/8" X 5", For 15'3" Harrow, Bolt; 3/8"X4-1/4", Bolt; (Use With 12h304 And 14h1076), Bolt; (C) 3/8" X 5", Bolt; 3/8" X 5", (Use With R58717), Bolt; 3/8" X 5" (Use With 14h812), Bolt; (A) 3/8" X 5", Bolt; 3/8" X 5", (Use With N187507), Bolt; 3/8" X 5", Use With N187507	0
AA***61	Hydraulic Hose; 3/4" X 4 801 mm (189") X 3/4", 9-Bottom, Hydraulic Hose; 3/4" X 4800 mm X 3/4", Hydraulic Hose; 1/2" X 4801 mm (189") X 3/4", Hydraulic Hose; 3/4" X 4800 mm (189") X 3/4" For 9-Bottom, Hydraulic Hose; (B) 3/4" X 189" X 3/4", Hydraulic Hose; 3/4" X 4800 mm (189") X 3/4" 3/4" X 171", Hydraulic Hose; Lgth= 4800mm, Hydraulic Hose; (A: 23 Ft Machine) 3/4" X 4800 mm X 3/4", Hydraulic Hose; 3/4" X 4 801 mm (189") X 3/4", Hydraulic Hose; (B) 3/4" X 4 801 mm (189") X 3/4", Hydraulic Hose; (B) 1/2" X 189", Hydraulic Hose; 3/4" X 4800 mm X 3/4" Long Hitch, Hydraulic Hose; (B) 3/4" X 4 801 mm X 3/4", Hydraulic Hose; 3/4" X 189", Hydraulic Hose; 3/4" X 4800 mm (189") X 3/4" (29'-6" Through 32'-4"), Hydraulic Hose; 3/4" X 189" (29'-6" Through 32'-4")	1
AA***09	Pressure Relief Valv; (16'5"-22'2"), Pressure Relief Valv; (Includes O-Ring R26448), Pressure Relief Valv; (Includes O-Ringr26448), Pressure Relief Valv, Pressure Relief Valv; Thermal, Pressure Relief Valv; 2-1/2" X 8", Pressure Relief Valv; Thermal Relief, Pressure Relief Valv; (A), Pressure Relief Valv; Thermal, (Includes R26448), Pressure Relief Valv; (Includes R26448) Thermal, Pressure Relief Valv; With O-Ring (4000 Psi)	1
AA***72	Hydraulic Hose; 3/4" X 3810 mm X 3/4" Single Point Depth Control, Hydraulic Hose; 3/4" X 3810 mm X 3/4" Touchset Depth Control, Hydraulic Hose; 3/4" X 3810 mm X 3/4", Hydraulic Hose; 3/4" X 3810 mm X 3/4" Electro Hydraulic Depth Control, Hydraulic Hose; 3/4" X 3810 mm X 3/4" Electro-Hydraulic Depth Control, Hydraulic Hose	2

See all parts with full part numbers in Heavy Parts AI →

Depth Control Hydraulics (Single Cylinder 11' Main Frame)

John Deere : 680 - Plow, Chisel : Depth Control Hydraulics (Single Cylinder 11' Main Frame)

14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	1
19***04	Bolt; 3/8" X 5" (U/W 3.5" Loader Tubes), Bolt; 3/8" X 5" (Use With N187507), Bolt; 3/8" X 5", Bolt; 3/8"X5", Bolt; (B: (Xxxxxx- ) 4560-00*21; 4760-0079; 4960-0006) 3/8" X 5", Bolt, Bolt; 3/8" X 5", (Cab), Bolt; (B: (Xxxxxx- ) 4555-0100; 4755-0101; 4955-01*49) 3/8" X 5", Cap Screw; 3/8" X 5", Bolt; 3/8" X 5" (Use With Mg86634148), Bolt; (Use With 12h304 And 14h812), Bolt; 9.525 X 127 mm (3/8" X 5"), Bolt; 3/8" X 5", For 15'3" Harrow, Bolt; 3/8"X4-1/4", Bolt; (Use With 12h304 And 14h1076), Bolt; (C) 3/8" X 5", Bolt; 3/8" X 5", (Use With R58717), Bolt; 3/8" X 5" (Use With 14h812), Bolt; (A) 3/8" X 5", Bolt; 3/8" X 5", (Use With N187507), Bolt; 3/8" X 5", Use With N187507	1
19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	1
24***48	Washer; (A) 1-1/32" X 1-1/2" X 0.120", Washer; 1-1/32" X 1-1/2" X 0.120" (A), Washer; 1-1/32" X 1-1/2" X 0.120", Washer; 26.187 X 38.100 X 3.048 mm, Washer; 1-1/32" X 1-1/2" X 0.120" (D), Washer, Washer; 1-1/32" X 1-1/2" X 0.120" (Sub For Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", (700), Washer; (A: For 9650 ( -70*00) & 9750 ( -7000)) 1-1/32" X 1-1/2" X 0.120", Washer; (Sub For (2) Mg272487), Washer; (Use With M150249 And M79152), Washer; 1-1/32" X 1-1/2" X 0.120" (Sub For (2) Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", 28 Ft, Washer; (A: Note; 9550 (7001- ) 9550sh (7001- )) 1-1/32" X 1-1/2" X 0.120", Washer; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1-1/32" X 1-1/2" X 0.120", Washer; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 1-1/32" X 1-1/2" X 0.120", Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For Et10714), Washer; 1-1/32" X 1-1/2" X 0.120", (750), Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For (2) Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120" (With 1" Pin), Washer; (A) 1-1/32" X 1-1/2" X 0.120" (K1) 35mm X 2.4mm (1.4" O.D. X .093" Thick) (Sub For (2) Mg272487)	4

See all parts with full part numbers in Heavy Parts AI →

Drawbar (Tine Tooth Harrow Attachment)

John Deere : 680 - Plow, Chisel : Drawbar (Tine Tooth Harrow Attachment)

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	2
19***20	Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer)	2
19***74	Cap Screw; (A) 1/2 X 2-3/4", Cap Screw; 1/2" X 2-3/4" (40'), Cap Screw; (B) 1/2" X 2-3/4", Cap Screw; 12.700 X 69.850 mm (1/2" X 2-3/4"), Cap Screw; 1/2" X 2-3/4", (Use With Fixed Drive Feeder House), Cap Screw; 1/2" X 2-3/4" (12 Used, Extra Heavy Duty Final Drive; 4 Used, Regular And Heavy Duty Final Drive), Cap Screw; 1/2x2-3/4", Cap Screw; 1/2" X 2-3/4", (Or), Cap Screw; 1/2" X 2-3/4" (Without Air Conditioning), Cap Screw; 1/2" X 2-3/4", (Ty2036), Cap Screw; 1/2 X 2-3/4", Cap Screw; 1/2" X 2-3/4" (Adjustable), Cap Screw; 1/2" X 2-3/4" (Use With 14h1040 And 12h301), Cap Screw; (C) 1/2" X 2-3/4", Cap Screw; 1/2" X 2-3/4, Cap Screw; 1/2" X 2-3/4", (Dual), Bolt, Cap Screw; 1/2"X 2 -3/4", Cap Screw; 1/2" X 2-3/4" (Without Electromagnetic Clutch), Cap Screw; (A) 1/2" X 2-3/4", Cap Screw; 1/2" X 2-3/4" Lh, Cap Screw; 1/2" X 2-3/4", Head Down, Cap Screw; (A) 1/2"X2-3/4", Cap Screw; 1/2" X 2-3/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 2-3/4" (Not Used With Electromagnetic Clutch), Cap Screw; 1/2" X 2-3/4", (Ru), Cap Screw; 1/2" X 2-3/4", (Use With An210207 On 8850 Tractor), Cap Screw; 1/2" X 2-3/4", Cap Screw; (A) (B) 1/2"X2-3/4", Cap Screw; 1/2" X 2-3/4" 11'5" - 26'5", Cap Screw; 1/2" X 2-3/4" 1/2" X 11/16" X 5/16", Cap Screw; 1/2"X2-3/4", Cap Screw; 1/2" X 2-3/4" (Use With 12h301), (Without Electromagnetic Clutch), Cap Screw; 1/2" X 2-3/4", (Rear Exhaust), Cap Screw; 1/2" X 2-3/4" Less Fenders, Cap Screw; 1/2" X 2-3/4" (Use With P54727 And P54726), Cap Screw; 1/2" X 2-3/4" (Use With Fixed Drive Feeder House), Cap Screw; 1/2" X 2-3/4" (Lh Side)	1
19***16	Cap Screw; (B: Four Weights) 5/8" X 6-1/2", Cap Screw; (B: Four Weight) 5/8" X 6-1/2", Cap Screw; (B: Four Weights) 5/8" X 6-1/2" (Hs, Sae 8), Cap Screw; (B) 5/8" X 6-1/2", (Hs, Sae 8), Cap Screw; 5/8" X 6-1/2", Cap Screw; 5/8" X 6-1/2", Cap Screw; 5/8" X 6-1/2" (Hs, Sae 8)	2

See all parts with full part numbers in Heavy Parts AI →

Extension Kit

John Deere : 680 - Plow, Chisel : Extension Kit

19***22	Cap Screw; 3/4" X 8" 20, 000 Lb 28'7" Through 32'1",(For Chain), Cap Screw; 3/4" X 8" Tapered Standard, Cap Screw; 3/4" X 8" (Hs, Sae 8) (20'-11") (20,000 Lb Chain), Cap Screw; 3/4" X 8" (Hs, Sae 8) (29'-3" Through 32'-1") (20,000 Lb Chain), Cap Screw; 3/4" X 8" Hs, Sae 8, Cap Screw; 3/4" X 8", Cap Screw; (B: Used With Weight Bracket) 3/4" X 8", Cap Screw; 3/4" X 8" Used With Weight Bracket, Cap Screw; 0,75" X 80", Cap Screw; 3/4" X 8" (Hs, Sae 8), Cap Screw; (E: ( -Xxxxxx) Serial No. 8450-00*26; 8650-0031) 3/4" X 8" Hs, Sae 8, Cap Screw; 3/4" X 8" (Hs, Sae 8) (28'7" Through 32'1") (For 20,000 Lb Chain), Cap Screw; 3/4"X8", Cap Screw; 0,75" X 8", Cap Screw; 3/4" X 8" (Folding 3-Section Machines Only), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-00*31) 3/4" X 8" Hs, Sae 8	1
34***48	Spring Pin; 1/8" X 13/16", Used With 20,000 Lbs. Chain, Spring Pin; 1/8" X 13/16", (Use With 20,000 Lb Chain), Spring Pin; 1/8" X 13/16" (Use With Ar90579 Or Ar90583), Spring Pin; 1/8" X 13/16", Spring Pin; 1/8" X 13/16", Spring Pin; (B: 20, 000 Lb.) 1/8" X 13/16", Spring Pin, Spring Pin; (A) 1/8" X 13/16", Spring Pin; 1/8" X 13/16" (A), Spring Pin; 1/8" X 13/16", 6-Row Narrow W/Split Row, Spring Pin; 1/8" X 13/16" (Sub Z9785h), Spring Pin; 1/8"X13/16" (Sub For 34h42)	1
AN***12	Wiring Harness	1
AN***13	Wiring Harness; For Tractors W/ Touchset Hydraulic Controls, Wiring Harness, Wiring Harness; For Tractors W/Touchset Hydraulic Controls, Wiring Harness; For Tractors W/ Touchset Hydaulic Controls, Wiring Harness; Tractors W/ Touchset Hydraulic Controls, Wiring Harness; For Tractors With Touchset Hydraulic Depth Controls	1

See all parts with full part numbers in Heavy Parts AI →

Flat Spring Standard

John Deere : 680 - Plow, Chisel : Flat Spring Standard

03***64	Bolt; 5/8" X 7-3/4", Bolt; (B) 5/8" X 7-3/4"	1
08***22	Cap Screw; (B) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (Sub For Mg281036), Cap Screw; 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (12'-2" Through 15'-0") (10,000 Lb Chain), Cap Screw; 3/4"X7-1/2", Cap Screw; 3/4" X 7-1/2", (12'2" Through 15'0") (For 10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (For 12-Row), Cap Screw; 3/4" X 7-1/2", 5 X 7 Frame, Cap Screw; 3/4" X 7-1/2", (For 12 Row), Cap Screw; (C) 3/4" X 7-1/2", (Long Tongue), Cap Screw; (A) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (13'-10" Through 19'-10") (10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (Long Tongue), Cap Screw; 3/4" X 7-1/2" (Use On Tapered Spring), Cap Screw; 3/4" X 7-1/2" (5 X 7 Frame), Cap Screw; (C) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (For 5 X 7 Frame), Cap Screw; (D: For 5 X 7 Frame) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" R.H., Cap Screw; 3/4" X 7-1/2" (Long Tongue) (C)	1
10***36	Bolt; 1/2" X 2-1/4", (Hs Sae 8), Bolt; (B) (C) 0,5" X 2,25", Bolt, Bolt; 1/2" X 2-1/4", Hs Sae8, Bolt; 1/2" X 2-1/4" (Used With Sweeps), Bolt; (B: For Msl) 1/2" X 2-1/4", Bolt; (B) (C) M12,7 X 57,15, Bolt; (A) (B) 1/2" X 2-1/4", Bolt; 1/2" X 2-1/4", Hs Sae 8, (Sub For 10h1076), Bolt; 1/2" X 2-1/4", 2150mm, Bolt; 0,5" X 2,25", Bolt; 1/2" X 2-1/4" (Hs, Sae 8), Bolt; 1/2" X 2-1/4" (Hs, Sae 8) (Used With Sweeps), Bolt; 1/2" X 2-1/4", Hs Sae 8, Bolt; 1/2" X 2-1/4", Bolt; 1/2"X2-1/4", Bolt; (B) 0,5" X 2,25", Bolt; 12.700 X 57.150 mm, Bolt; (B: For Msl) (C: For Nsl) 1/2" X 2-1/4", Bolt; (B) M12,7 X 57,15, Bolt; 1/2" X 2-1/4" (For Use With Sweeps)	2
10***37	Bolt; 1/2"X2-1/2", Bolt; 1/2" X 2-1/2", N0. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", Hs Sae8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8), Bolt; (B) 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Hs, Sae 8) (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) Banding Boot, Bolt; 1/2" X 2-1/2", 3 Plow Bolt, Bolt; 1/2" X 2-1/2", (Hs Sae 8), Bolt; 1/2" X 2-1/2", Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (No. 3 Plow Bolt), Bolt; 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2", No. 3, Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Used With Chisels), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (Used With Chisels), Bolt; 1/2" X 2-1/2", (Hs, Sae 8), Bolt; 1/2" X 2-1/2", Hs Sae 8, Bolt; 1/2" X 2-1/2" No. 3 Plow Bolt (Hs, Sae 8), Bolt; 1/2" X 2-1/2", No. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", No.3 Plow Bolt, Bolt; 1/2" X 2-1/2" (For Use With Chisels), Bolt; 1/2" X 2-1/2", N0.3 Plow Bolt, Bolt; 12.700 X 63.500 mm (1/2" X 2-1/2")	2

See all parts with full part numbers in Heavy Parts AI →

Floating Hitch Caster Wheel, Pivot And Yoke

John Deere : 680 - Plow, Chisel : Floating Hitch Caster Wheel, Pivot And Yoke

03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	6
14***76	Nut; 1" (B), Nut; 1" Jam, Nut; 1", Jam, Nut; 1" Hex Jam, Nut; 1", Nut; (A) 1", Nut; 1", Hex Jam, Nut; 1" (A) (B) (C), Nut; (Use With An204476), Nut; 1", (Sub For N209287), Nut; 25.400 mm (1") Hex Jam, Nut, Nut; (B: Quantities Shown Are For One Unit. Two Units Used Per Machine, Except Those Identified With An (A).) 1", Nut; 1" (Sub For N209287)	1
14***62	Nut; 1", No Longer Required, Nut; 1", Nut; 1", (Sub P49591), Nut; 25.400 mm (1"), Nut; (B) 1"	1
19***56	Cap Screw; 5/8" X 1-1/2", (Use With Ae36664 And Ae41988), Cap Screw; (B) 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2", (Rs), Cap Screw; (C) 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2", For 850 And 870, Cap Screw; 5/8" X 1-1/2", Low, Cap Screw; 5/8" X 1-1/2" (Sub For R45693, This Application), Cap Screw; (A), Cap Screw; 5/8" X 1-1/2", (24-Ft. Model Only), Cap Screw; 5/8" X 1-1/2", Re10901, Appl), Cap Screw; 5/8" X 1-1/2", (Sub For Re10901, This Application), Cap Screw; 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2", (Sub For N134341), Cap Screw; 5/8" X 1-1/2", (Sub For R45693), Cap Screw; 5/8" X 1-1/2", (Sub For R45693, This Application), Cap Screw; (A) 5/8"X1-1/2", Cap Screw; 5/8" X 1-1/2", For 15'3" Harrow, Cap Screw; 5/8" X 1-1/2" (Sub For Re10901, Appl), Cap Screw, Cap Screw; (V) 5/8" X 1-1/2", 3/4" Arm, Cap Screw; 5/8" X 1-1/2", (Use With 12h294 And 14h1039), Cap Screw; (A) 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2" (Sub For R45693 Or Re10901, Appl), Cap Screw; 5/8"X1", Cap Screw; 5/8" X 1-1/2", (24 Ft. Only), Cap Screw; 5/8" X 1-1/2" With Strap, Cap Screw; 5/8" X 1-1/2", Fertilizer Opener, Cap Screw; 5/8" X 1-1/2", (Platform Attaching Hardware), Cap Screw; Rh, Cap Screw; 5/8" X 1-1/2", (Sub For R45693 Or Re10901, This Application), Cap Screw; 5/8" X 1-1/2", (Sub For R45693, Appl), Cap Screw; 5/8" X 1-1/2" (Sub For Re10901, This Application), Cap Screw; 5/8" X 1-1/2" (Sub For R45693), Cap Screw; 5/8" X 1-1/2" (Sub For R45693 Or Re10901, Appl), Cap Screw; (A: ( -Xxxxxx) 8560-00*00; 8760-0000; 8960-00**00) 5/8" X 1-1/2", Cap Screw; 3/8"X1/2", Cap Screw; 5/8"X1-1/2" (Sub For R45693), Cap Screw; 5/8" X 1-1/2", For 870, Bolt, Cap Screw; 5/8" X 1-1/2" (To Cylinder Block), Cap Screw; 15.875 X 38.100 mm (5/8" X 1-1/2"), Cap Screw; 5/8"X1-1/2", Cap Screw; 5/8" X 1-1/2" (Sub For Mg88062), Cap Screw; 5/8" X 1-1/2", (Less Side Frames), Cap Screw; 5/8" X 1-1/2", Cap Screw; 5/8" X 1-1/2", (Sub For R45693 Or Re10901, Appl), Cap Screw; Hs, Sae 8, 5/8" X 1-1/2", Cap Screw; (Sub For Re10901, Appl)	2

See all parts with full part numbers in Heavy Parts AI →

Floating Hitch Wheel Arm Assembly ( - Xxxx)

John Deere : 680 - Plow, Chisel : Floating Hitch Wheel Arm Assembly ( - Xxxx)

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	16
19***24	Cap Screw; 5/8" X 2-1/4", Use When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" R.H. Side Only, Cap Screw; 5/8" X 2-1/4", Required To Connect Unit To Parallel Arms, Cap Screw; 5/8 X 21/2-In., Cap Screw, Cap Screw; 5/8" X 2-1/4", (Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Front Axle), Cap Screw; 5/8" X 2-1/4" (2940, 3030, 3040, 3130, 3140 (37*06-)) (2950, 2955, 3050, 3350), Cap Screw; 5/8" X 2-1/4", Use With N212983 When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Use With Extension, Cap Screw; 5/8" X 2-1/4", (Sub For 19h1734) This Application Only, Cap Screw; (D) 5/8" X 2-1/4", Cap Screw; (B) 5/8" X 2-1/4", Cap Screw; 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Use With 12h294), Cap Screw; (H: Also Use On 4050e And 4250e) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Rh Side Only, Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4", (Used With Wheel Spacers), Bolt, Cap Screw; (C) (G) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Used With Sheel Spacers), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70**00)) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Wing Frame Only, Cap Screw; 5/8" X 2-1/4", Rear Position - 530, 630, 520, 50 Or 60 Tractors; Front Position - 730, 720, Or 70 Tractors., Cap Screw; 5/8" X 2-1/4", (Use When Hitch Is Lowered), Cap Screw; (C) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Planetary Final Drive), Cap Screw; 5/8" X 2-1/4" (To Front Axle Support), Cap Screw; 5/8" X 2-1/4" (Used With Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Cylinder Block), Cap Screw; 5/8" X 2-1/4" (To Cylinder Block), . Bolt, Cap Screw; 15.875 X 57.150 mm	8
19***72	Cap Screw; (B: Main Frame (5 Section)) 5/8" X 6", Cap Screw; (B: Main Frame (5 Section) All Depth) 5/8" X 6", Cap Screw; 5/8" X 6", (Use When Hitch Is Lowered), Cap Screw; (B: Main Frame (5 Section) Accu Depth) 5/8" X 6", Cap Screw; 5/8" X 6", Rear (Rs), Cap Screw; 5/8" X 6", (For 31' Thru 41' Machines), Cap Screw; 5/8" X 6", (No Longer Available), Cap Screw; 5/8" X 6" Main Frame Only, Cap Screw; 5/8" X 6", Use With N212632 When Hitch Is Lowered, Cap Screw; 5/8" X 6" (Sub For Rw26466 Or Ar111058) (Not Used This Application), Cap Screw; 5/8" X 6", (30-Ft. Model Only), Cap Screw; (Sub For Rw26466 Or Ar111058) (Not Used This Application), Cap Screw; 5/8" X 6", (Use With N212632 When Hitch Is Lowered), Cap Screw; 5/8" X 6", Cap Screw; 5/8" X 6" (Sub For (2) Mg88264), Cap Screw; 5/8" X 6" 30-50 Series 4-Wheel Drive Only, Cap Screw; 5/8" X 6", For 4" X 4" (102 X 102 mm) Frame (Upper), Cap Screw; (Not Used This Application), Cap Screw; (A) 5/8" X 6", Cap Screw; 5/8" X 6", 431, Cap Screw; 5/8" X 6", 631, Cap Screw; 5/8" X 6" (Not Used This Application), Cap Screw; 5/8" X 6", (30 Ft. Only), Cap Screw; 5/8" X 6", Use When Hitch Is Lowered, Cap Screw; (A: Narrow) 5/8" X 6", Cap Screw; 5/8" X 6", (For 5 X 5 Frame)	16
19***06	Screw; (B: Used Without Front Stabilizer Wheels) 5/8" X 2", Screw; 5/8" X 2" (Hs, Sae 8), Screw; (B) 5/8" X 2", Hs, Sae 8, Screw; 5/8" X 2" (Hs, Sae 8) (36 Conditioner), Screw; 5/8" X 2" (Hs, Sae 8) Coarse Thread, Screw; 15.875 X 50.800 mm, Screw; 5/8" X 2" Rear, Screw; 5/8" X 2", Hs, Sae 8, Screw, Screw; (B) 5/8" X 2" (Hs, Sae 8), Screw; 15.875 X 50.800 mm (5/8" X 2"), Screw; 5/8" X 2" Wing Hinge, Screw; 5/8" X 2", Screw; 5/8" X 2" (36 Ft And 44 Ft Main Frame Extension Hinge, Rear Holes), Screw; 5/8" X 2" (Hs, Sae 8) Front Main Frame Hinge, Screw; 5/8" X 2", (Hs, Sae 8) (36 Conditioner), Screw; 5/8" X 2", Used Without Front Stabilizer Wheels, Screw; Hs Sae 8, Cap Screw; 5/8" X 2", Screw; 5/8" X 2", (Hs, Sae 8), Screw; (A) 5/8" X 2" (Hs, Sae 8), Screw; 0,625" X 2,0", Screw; 5/8" X 2" Hs=10.9, Sae 8, Screw; 5/8" X 2" (28 Ft Main Frame Extension Hinge), Screw; (A) 5/8" X 2", Screw; 5/8" X 2" Front Main Frame Hinge, Screw; 5/8" X 2", L.H., Hs, Sae 8, Screw; 5/8" X 2", For 760 And 790, Screw; 5/8" X 2" (Sae 8), Screw; 5/8" X 2" Hs, Sae 8, (Side Frames), Screw; 5/8" X 2", (35 Conditioner) (Hs, Sae 8), Screw; 5/8" X 2" (Hs, Sae 8) (2840, 2940, 2950, 3130, 3140), Screw; 5/8" X 2" Hs 8 Sae, Cap Screw, Screw; 5/8" X 2", (Sub For 19h1734), Screw; 5/8" X 2" (Lh Side), Screw; 5/8" X 2", For 3.7 M (12') And 4.6 M (15') Size., Screw; 5/8" X 2" Hs, Sae 8, Screw; 5/8" X 2" Not Illustrated, Screw; 5/8"X2", Screw; (C) (D) 5/8" X 2" (Hs, Sae 8)	2

See all parts with full part numbers in Heavy Parts AI →

Floating Hitch Wheel Arm Assembly (Xxxx - )

John Deere : 680 - Plow, Chisel : Floating Hitch Wheel Arm Assembly (Xxxx - )

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	16
19***24	Cap Screw; 5/8" X 2-1/4", Use When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" R.H. Side Only, Cap Screw; 5/8" X 2-1/4", Required To Connect Unit To Parallel Arms, Cap Screw; 5/8 X 21/2-In., Cap Screw, Cap Screw; 5/8" X 2-1/4", (Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Front Axle), Cap Screw; 5/8" X 2-1/4" (2940, 3030, 3040, 3130, 3140 (37*06-)) (2950, 2955, 3050, 3350), Cap Screw; 5/8" X 2-1/4", Use With N212983 When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Use With Extension, Cap Screw; 5/8" X 2-1/4", (Sub For 19h1734) This Application Only, Cap Screw; (D) 5/8" X 2-1/4", Cap Screw; (B) 5/8" X 2-1/4", Cap Screw; 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Use With 12h294), Cap Screw; (H: Also Use On 4050e And 4250e) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Rh Side Only, Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4", (Used With Wheel Spacers), Bolt, Cap Screw; (C) (G) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Used With Sheel Spacers), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70**00)) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Wing Frame Only, Cap Screw; 5/8" X 2-1/4", Rear Position - 530, 630, 520, 50 Or 60 Tractors; Front Position - 730, 720, Or 70 Tractors., Cap Screw; 5/8" X 2-1/4", (Use When Hitch Is Lowered), Cap Screw; (C) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Planetary Final Drive), Cap Screw; 5/8" X 2-1/4" (To Front Axle Support), Cap Screw; 5/8" X 2-1/4" (Used With Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Cylinder Block), Cap Screw; 5/8" X 2-1/4" (To Cylinder Block), . Bolt, Cap Screw; 15.875 X 57.150 mm	8
19***72	Cap Screw; (B: Main Frame (5 Section)) 5/8" X 6", Cap Screw; (B: Main Frame (5 Section) All Depth) 5/8" X 6", Cap Screw; 5/8" X 6", (Use When Hitch Is Lowered), Cap Screw; (B: Main Frame (5 Section) Accu Depth) 5/8" X 6", Cap Screw; 5/8" X 6", Rear (Rs), Cap Screw; 5/8" X 6", (For 31' Thru 41' Machines), Cap Screw; 5/8" X 6", (No Longer Available), Cap Screw; 5/8" X 6" Main Frame Only, Cap Screw; 5/8" X 6", Use With N212632 When Hitch Is Lowered, Cap Screw; 5/8" X 6" (Sub For Rw26466 Or Ar111058) (Not Used This Application), Cap Screw; 5/8" X 6", (30-Ft. Model Only), Cap Screw; (Sub For Rw26466 Or Ar111058) (Not Used This Application), Cap Screw; 5/8" X 6", (Use With N212632 When Hitch Is Lowered), Cap Screw; 5/8" X 6", Cap Screw; 5/8" X 6" (Sub For (2) Mg88264), Cap Screw; 5/8" X 6" 30-50 Series 4-Wheel Drive Only, Cap Screw; 5/8" X 6", For 4" X 4" (102 X 102 mm) Frame (Upper), Cap Screw; (Not Used This Application), Cap Screw; (A) 5/8" X 6", Cap Screw; 5/8" X 6", 431, Cap Screw; 5/8" X 6", 631, Cap Screw; 5/8" X 6" (Not Used This Application), Cap Screw; 5/8" X 6", (30 Ft. Only), Cap Screw; 5/8" X 6", Use When Hitch Is Lowered, Cap Screw; (A: Narrow) 5/8" X 6", Cap Screw; 5/8" X 6", (For 5 X 5 Frame)	16
19***06	Screw; (B: Used Without Front Stabilizer Wheels) 5/8" X 2", Screw; 5/8" X 2" (Hs, Sae 8), Screw; (B) 5/8" X 2", Hs, Sae 8, Screw; 5/8" X 2" (Hs, Sae 8) (36 Conditioner), Screw; 5/8" X 2" (Hs, Sae 8) Coarse Thread, Screw; 15.875 X 50.800 mm, Screw; 5/8" X 2" Rear, Screw; 5/8" X 2", Hs, Sae 8, Screw, Screw; (B) 5/8" X 2" (Hs, Sae 8), Screw; 15.875 X 50.800 mm (5/8" X 2"), Screw; 5/8" X 2" Wing Hinge, Screw; 5/8" X 2", Screw; 5/8" X 2" (36 Ft And 44 Ft Main Frame Extension Hinge, Rear Holes), Screw; 5/8" X 2" (Hs, Sae 8) Front Main Frame Hinge, Screw; 5/8" X 2", (Hs, Sae 8) (36 Conditioner), Screw; 5/8" X 2", Used Without Front Stabilizer Wheels, Screw; Hs Sae 8, Cap Screw; 5/8" X 2", Screw; 5/8" X 2", (Hs, Sae 8), Screw; (A) 5/8" X 2" (Hs, Sae 8), Screw; 0,625" X 2,0", Screw; 5/8" X 2" Hs=10.9, Sae 8, Screw; 5/8" X 2" (28 Ft Main Frame Extension Hinge), Screw; (A) 5/8" X 2", Screw; 5/8" X 2" Front Main Frame Hinge, Screw; 5/8" X 2", L.H., Hs, Sae 8, Screw; 5/8" X 2", For 760 And 790, Screw; 5/8" X 2" (Sae 8), Screw; 5/8" X 2" Hs, Sae 8, (Side Frames), Screw; 5/8" X 2", (35 Conditioner) (Hs, Sae 8), Screw; 5/8" X 2" (Hs, Sae 8) (2840, 2940, 2950, 3130, 3140), Screw; 5/8" X 2" Hs 8 Sae, Cap Screw, Screw; 5/8" X 2", (Sub For 19h1734), Screw; 5/8" X 2" (Lh Side), Screw; 5/8" X 2", For 3.7 M (12') And 4.6 M (15') Size., Screw; 5/8" X 2" Hs, Sae 8, Screw; 5/8" X 2" Not Illustrated, Screw; 5/8"X2", Screw; (C) (D) 5/8" X 2" (Hs, Sae 8)	2

See all parts with full part numbers in Heavy Parts AI →

Hitch Link And Drawbar Clevis

John Deere : 680 - Plow, Chisel : Hitch Link And Drawbar Clevis

24***59	Washer; 1-1/32" X 2-1/4" X 1/4", (4 Nominal), Washer; 1-1/32" X 2-1/4" X 1/4", Washer; 1-1/32" X 2-1/4" X 1/4", (For 1" Threads), Washer; 26.187 X 57.150 X 6.350 mm (1-1/32" X 2-1/4" X 1/4"), Washer, Washer; 1-1/32" X 2-1/4" X 1/4" (2 Used With N188346) (1 Used With N188331), Washer; 1-1/32" X 2-1/4" X 1/4", (2 Used With N188346) (1 Used With N188331), Washer; (A: Hardware For Aa25964) 1-1/32" X 2-1/4" X 1/4"	1
K4***18	Lock Nut; (A) 1", Lock Nut; 25.400 mm (1"), Lock Nut; For Safety Chain Attachment, Lock Nut; 2004 Drawn (Hd), Lock Nut; Flange, Lock Nut; (A: Used With Tow-Between Cart) Use With Aa65069 At Cart, Lock Nut; For Safety Chain Attachment (For 5-Section Machines Only), Lock Nut; 25.400 mm, Lock Nut; (5-Section Only) (1" Bolt Holes), Lock Nut; 25.400 mm (1"), Lock Nut; M8, Lock Nut; 25.400 mm (2 Used With N188346) (1 Used With N188331), Lock Nut; For Safety Chain Attachment (1" Bolt Holes), Lock Nut; 25,4 X 21,8 X 38,1 mm, Lock Nut; 1", Lock Nut, Lock Nut; (W) 1", Lock Nut; 1" Bolt Holes, For Safety Chain Attachment, Lock Nut; (For 1" Threads), Lock Nut; (B), Lock Nut; 1", (2 Used With N188346) (1 Used With N188331), Lock Nut; 1", Flange, Lock Nut; (B: 32'-6" To 41'-6") 25.400 mm, Lock Nut; (Sub For K40016, This Application), Lock Nut; 1" Bolt Holes	1
N2***59	Link	1
N1***12	Bolt; (C: Heavy Duty), Bolt; 1" X 7-1/2", Bolt; (Hs, Sae 8), Bolt, Bolt; (B) (C), Bolt; 25.400 X 190.500 mm, Bolt; 25.400 X 190.500 mm (2 Used With N188346) (1 Used With N188331), Bolt; 1" X 7-1/2", (2 Used With N188346) (1 Used With N188331), Bolt; 25.400 X 190.500 mm (11' Main Frame Level Lift Hitch), Bolt; 25.400 X 190.500 mm Heavy Duty, Bolt; 1" X 7-1/2", Hitch, (Sub For N181457)	2

See all parts with full part numbers in Heavy Parts AI →

Hitch Support

John Deere : 680 - Plow, Chisel : Hitch Support

08***25	Cap Screw; (C: 12 16 20 Weights) 5/8" X 11-1/2", Cap Screw; (A) 5/8" X 11-1/2", Cap Screw; 5/8" X 11-1/2" (Inner Wing, Outer Tube), Cap Screw; 5/8" X 11-1/2", Cap Screw; (B: 12 Weights) 5/8" X 11-1/2", Cap Screw; (D: 12 Weights) 5/8" X 11-1/2", Cap Screw; 5/8" X 11-1/2" (Outer Wing), Cap Screw; (B: 8 10 12 Weights) 5/8" X 11-1/2", Cap Screw; 5/8" X 11-1/2", 20 Weights, Region I, Cap Screw; (C: 8-12 Weights) 5/8" X 11-1/2", Cap Screw; (A: 12-12 Weights) 5/8" X 11-1/2" Hs Sae 8, Cap Screw; (A: 8-12 Weights) 5/8" X 11-1/2", Cap Screw; (E: For 12 , 8, 4 Package) 5/8" X 11-1/2", Cap Screw; (A: 27 Ft - 9 In) (B: 30 Ft - 9 In (Illustrated)) 5/8" X 11-1/2", Cap Screw, Cap Screw; (A: 8 Weights) (B: 12 Weights) 5/8" X 11-1/2", Cap Screw; (B: 8, 12 Weights) 5/8" X 11-1/2", Cap Screw; (A: 12-12 Weights) 5/8" X 11-1/2", Cap Screw; (E: For 12 Package) 5/8" X 11-1/2"	4
08***62	Cap Screw; (D: For 8 Weights / 10 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8" X 10-1/2", Cap Screw; (D: Eight Weights / Ten Weights) 5/8" X 10-1/2", Cap Screw; 5/8" X 10-1/2", Cap Screw; (D: 8 Weights / 10 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8" X 10-1/2", Cap Screw; 5/8" X 10-1/2", 18 Weights, Region I, Cap Screw; (D: 8 Weights / 10 Weights) 5/8" X 10-1/2", Cap Screw; (D) 15.875 X 266.700 mm, Cap Screw; 5/8" X 10-1/2" 8" Tube, Cap Screw; 5/8" X 10-1/2" 8 X 10" Tube, Cap Screw; 5/8" X 10-1/2" U/W 8 X 8 Tube, Cap Screw; 5/8" X 10-1/2" 8 X 8 Tube, Cap Screw; (E: 16r30) 5/8" X 10-1/2", Cap Screw; (D: For 8 Weights / 10 Weights) 5/8" X 10-1/2"	4
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	18
19***24	Cap Screw; 5/8" X 2-1/4", Use When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" R.H. Side Only, Cap Screw; 5/8" X 2-1/4", Required To Connect Unit To Parallel Arms, Cap Screw; 5/8 X 21/2-In., Cap Screw, Cap Screw; 5/8" X 2-1/4", (Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Front Axle), Cap Screw; 5/8" X 2-1/4" (2940, 3030, 3040, 3130, 3140 (37*06-)) (2950, 2955, 3050, 3350), Cap Screw; 5/8" X 2-1/4", Use With N212983 When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Use With Extension, Cap Screw; 5/8" X 2-1/4", (Sub For 19h1734) This Application Only, Cap Screw; (D) 5/8" X 2-1/4", Cap Screw; (B) 5/8" X 2-1/4", Cap Screw; 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Use With 12h294), Cap Screw; (H: Also Use On 4050e And 4250e) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Rh Side Only, Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4", (Used With Wheel Spacers), Bolt, Cap Screw; (C) (G) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Used With Sheel Spacers), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70**00)) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Wing Frame Only, Cap Screw; 5/8" X 2-1/4", Rear Position - 530, 630, 520, 50 Or 60 Tractors; Front Position - 730, 720, Or 70 Tractors., Cap Screw; 5/8" X 2-1/4", (Use When Hitch Is Lowered), Cap Screw; (C) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Planetary Final Drive), Cap Screw; 5/8" X 2-1/4" (To Front Axle Support), Cap Screw; 5/8" X 2-1/4" (Used With Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Cylinder Block), Cap Screw; 5/8" X 2-1/4" (To Cylinder Block), . Bolt, Cap Screw; 15.875 X 57.150 mm	2

See all parts with full part numbers in Heavy Parts AI →

Hose Storage Support

John Deere : 680 - Plow, Chisel : Hose Storage Support

14***26	Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2"	4
19***74	Cap Screw; 3/8" X 7", Hs, Sae 8, Cap Screw; 3/8" X 7", (Hs, Sae 8), Cap Screw; 3/8" X 7" (Hs, Sae 8) (Rigid Hitch), Cap Screw; 3/8" X 7", Cap Screw; 3/8" X 7" (Hs, Sae 8), Cap Screw; 3/8" X 7, Hs, Sae 8, Cap Screw; 3/8" X 7" Hs, Sae 8, Cap Screw; 3/8" X 7" (Use With N187952) (Hs, Sae 8), Cap Screw; 3/8" X 7", Hs Sae8, Cap Screw; 3/8" X 7", Hs,Sae 8	2
AN***87	Kit, Kit; Hose Storage Bracket, Kit; (Sub For (2) A51173), Kit; Hydraulic Hose Storage Kit, Kit; Hydraulic Hose Storage Bracket, Kit; (Sub For A51173)	1
AR***92	Clamp; 15.2 cm (6"), Clamp, Clamp; 152 mm (6"), Clamp; 152.4 mm (6")	1

See all parts with full part numbers in Heavy Parts AI →

Horizontal Fold Hinges (Rigid 17' Base Machine Sizes)

John Deere : 680 - Plow, Chisel : Horizontal Fold Hinges (Rigid 17' Base Machine Sizes)

11***56	Cotter Pin; (Lift Assist Wheel), Cotter Pin; 8 X 50 mm, (Sub For T110927), Cotter Pin; 8 X 50 mm (0.315" X 1.969"), Cotter Pin; 8 X 50 mm, Cotter Pin; 8 X 50 mm (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (Sub A24072, This Application), Cotter Pin; 8 X 50 mm 7000 Series Tractors (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (With 1-1/4" Pin), Cotter Pin; (C) (D) 8 X 50 mm, Cotter Pin; (C) (D) (F) 8 X 50 mm, Cotter Pin; 8 X 50 mm Used On 1820 Drill To Secure Chain, Cotter Pin; (B: Used On 1820 Drill To Secure Chain) 8 X 50 mm	2
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	8
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	0
19***28	Cap Screw; 5/8" X 4" 18'9" And 21'9", Cap Screw; 5/8" X 4", Cap Screw; 5/8"X4", Cap Screw; (R) 5/8" X 4", Cap Screw; 15.875 X 101.600 mm (5/8" X 4") Used Where Light Bracket Attaches, Cap Screw; (B) 5/8" X 4", Cap Screw; 5/8" X 4", (16 X 6 Disk) (8 X 12, 10 X 10 And 7 X 14 Hoe), Cap Screw; (D) 5/8" X 4", Cap Screw; 5/8" X 4" Use With 6" Spacing On S-Tine Models, Cap Screw; (B) 5/8" X 4", (Rear Flange To Flywheel Housing), Cap Screw; 5/8" X 4", (Rigid Models Only), Cap Screw; 5/8" X 4", Upper And Lower Holes (For 6359t Engine), Cap Screw; 5/8"X4, Cap Screw; (B) (C) (D) 5/8" X 4", Cap Screw; 5/8" X 4", (With Markers), Cap Screw; 5/8" X 4", No. 4 Grab Roll, Cap Screw; (B), Cap Screw; (A) 5/8" X 4", Cap Screw; (C) 5/8" X 4", Cap Screw; 5/8" X 4" Main Frame Front, Cap Screw; 5/8" X 4" (For Rigid Models Only), Cap Screw; 5/8"X4" W/Dual-Stage Clutch, Cap Screw; 5/8" X 4" (15'9"), Cap Screw; 5/8" X 4" (A), Cap Screw; 5/8" X 4", (7 X 14 Hoe)	4

See all parts with full part numbers in Heavy Parts AI →

Horizontal Wing Fold Hydraulics (Drawn Rigid)

John Deere : 680 - Plow, Chisel : Horizontal Wing Fold Hydraulics (Drawn Rigid)

AA***09	Pressure Relief Valv; (16'5"-22'2"), Pressure Relief Valv; (Includes O-Ring R26448), Pressure Relief Valv; (Includes O-Ringr26448), Pressure Relief Valv, Pressure Relief Valv; Thermal, Pressure Relief Valv; 2-1/2" X 8", Pressure Relief Valv; Thermal Relief, Pressure Relief Valv; (A), Pressure Relief Valv; Thermal, (Includes R26448), Pressure Relief Valv; (Includes R26448) Thermal, Pressure Relief Valv; With O-Ring (4000 Psi)	1
AE***28	Elbow Fitting; (Sub Aa43396), Elbow Fitting; 90 Degrees, Elbow Fitting; 90 Degree 3/4" Female 0-Ring X 3/4" Male O-Ring, Elbow Fitting; 90°, Elbow Fitting; (A: Use With Filter Screen), Elbow Fitting; 90° (Use With Filter), Elbow Fitting; (Sub For Aw25268), Elbow Fitting; 90 Degree 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90-, Elbow Fitting, Elbow Fitting; (A), Elbow Fitting; 90° 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90 Degree, Elbow Fitting; 90º, Elbow Fitting; 90° (For Loaders Before Serial Number 3915) (For Loaders Before Serial Number 3915) 90°, Elbow Fitting; 90º (Sub For (1) Aw25268), Elbow Fitting; 90	2
AH***64	Elbow Fitting; Jam, Elbow Fitting; Used For Direct Connection To Valve, Elbow Fitting; (With Hydraulic Wagon), Elbow Fitting; (B: 8000 & 9000 Series Tractors), Elbow Fitting; (G: All Tractors), Elbow Fitting; 90 Degree Swivel, Elbow Fitting; No. 1 Cylinder Piston End To Port P1, Elbow Fitting; 90 Deg. (Sub For Mg248974), Elbow Fitting; 90° 3/4" Female Jic X 3/4" Male Jic, Elbow Fitting; (90 Degree), Elbow Fitting; 8-Row Wide, Elbow Fitting; 10- And 12- Row, Elbow Fitting; 90° Swivel, Elbow Fitting; 90° (Without Extendible Dipperstick), Elbow Fitting; (A) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting, Elbow Fitting; (Sub For Au43691), Elbow Fitting; 28', Elbow Fitting; 10 And 12- Row, Elbow Fitting; 90 Deg. (Sub For Mg248974) Adjustable, Elbow Fitting; 3/4" Jic Male X 3/4" Jic Swivel, Elbow Fitting; (90°) (213), Elbow Fitting; 90° (2 Used, Double Acting Cylinders) (Illustrated), Elbow Fitting; 90° 3/4" Mora To 3/4" Jicm, Elbow Fitting; 90°, Elbow Fitting; (2 Used, (A)) (Sub For Au43691), Elbow Fitting; (A) 90° 3/4" Jics To 3/4" Jicm, Elbow Fitting; (A), Elbow Fitting; Double Acting Valve Sections, Elbow Fitting; (Used For Direct Connection To Valve), Elbow Fitting; 90° 3/4" Jic Male X 3/4" Jic Female Swivel, Elbow Fitting; 90° (2 Used Roll-Gard Or Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (2 Used Roll-Gard And Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (Sub For Aa15480), Elbow Fitting; (Sub For At124775), Elbow Fitting; 3/4" Male Jic X 3/4" Female Jic Swivel, Elbow Fitting; 90 Degree, Elbow Fitting; (G), Elbow Fitting; (A) 90°, (Sub For Au43691), Elbow Fitting; (213), Elbow Fitting; 90°, (Without Extendible Dipperstick), Elbow Fitting; (A: 50 & 55 Series Tractors With Spool Type Remote Cylinder Control Valve) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting; (3/4" Male Jic X 3/4" Female Jic Swivel), Elbow Fitting; 90°, With Forage Wagon, Elbow Fitting; 36' And 44', Elbow Fitting; 90 °, Elbow Fitting; (Auger Swing Latch), Elbow Fitting; (For Tractors With Vertical Exhaust), Elbow Fitting; (C: Motor Return), Elbow Fitting; (A) (B) (C) (Used For Direct Connect To Valve), Elbow Fitting; 90 Degree, (Sub For Mg248974), Elbow Fitting; (B), Elbow Fitting; 90°, Swivel	2
AN***06	Hydraulic Hose, Hydraulic Hose; (A: (For 23 Foot Machine)) 3/4" X 2540 mm X 3/4", Hydraulic Hose; 3/4" X 2 540 mm (100") X 3/4", Hydraulic Hose; 3/4" X 2540 mm X 3/4", Hydraulic Hose; 3/4" X 2 540 mm (100") X 3/4", (Sub For Aa39155), Hydraulic Hose; (A: (For Machine With 11-1/2 Foot Frame)) 3/4" X 2540 mm X 3/4" (Sub For An183316), Hydraulic Hose; (A: (For 23 Foot Machine)) 3/4" X 2540 mm X 3/4" (Sub For An183316), Hydraulic Hose; 3/4" X 2540 mm X 3/4" (Sub For An183316), Hydraulic Hose; 3/4" X 100" X 3/4", Hydraulic Hose; 3/4" X 2540 mm (100") X 3/4", Hydraulic Hose; 3/8" X 2540 mm (100") X 3/4", Hydraulic Hose; 3/8" X 100", Hydraulic Hose; 3/4" X 2 540 mm X 3/4", Hydraulic Hose; 7std30 And 9std24	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (3-1/2" X 12")

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (3-1/2" X 12")

14***52	Nut; 22.225 mm, Torque 205-242 Lb-Ft (295-345 N-M) - Apply Loctite 271 To Rod Threads, Nut; 7/8", Unf, Nut; 7/8", Nut; 7/8" Unf, Nut; 7/8" (Use With Ah212762, Ah212751 Or Ah212683), Nut; 7/8" 7/8”, Nut, Nut; 22.225 mm, Torque 205-242 Lb-Ft (295-345 N-M), Nut; 22.225 mm, Torque To 205-242 Lb-Ft (295-345 N-M) - Apply Loctite 271 To Rod Threads, Nut; 7/8" 3.25" And 3.50", Nut; 7/8", (Sub For W40014)	1
AH***22	Seal Kit; (Use With Ah176443) Includes An260225 Piston Seal Kit, Seal Kit; (Use With Ah176678 Or Ah176677) Includes An260225 Piston Seal Kit, Seal Kit; (Use With Ah176602 And Ah176601), Seal Kit, Seal Kit; 3.50" (Use With Ah212683), Seal Kit; (Use With Ah176602), Seal Kit; (A: Seal), Seal Kit; (Use With Ah176875 And Ah212678), Seal Kit; (Sub For Ah176572, This Application), Seal Kit; (B: 41 Ft Machines) (Use With Ah176875), Seal Kit; (A: 29 Ft And 36 Ft Machines) (Use With Ah176875 And An212678), Seal Kit; Seal, Seal Kit; (Use With Ah210669), Seal Kit; (Use With Ah176325 And Ah176324), Seal Kit; (A: Seals), Seal Kit; (Use With Ah176364), Seal Kit; (Use With Ah176324), Seal Kit; (Use With Ah176875), Seal Kit; (Includes Parts Marked (A)), Seal Kit; (Use With Ah212683) Includes An260225 Piston Seal Kit, Seal Kit; 3.50" X 12", Seal Kit; (Use With Ah206686)	1
AH***54	Hydraulic Cylinder; (A) (John Deere)(Illustrated) (Sub For Ah176871), Hydraulic Cylinder; (B) (John Deere) (Sub For Ah176871), Hydraulic Cylinder; (Sub For Ah176871), Hydraulic Cylinder, Hydraulic Cylinder; 3-1/4" X 12", Hydraulic Cylinder; 3-1/4 X 12" (Sub For An240668 Or Ah176871) (Sub Ah215738, This Application), Hydraulic Cylinder; (Sub For Ah176875), Hydraulic Cylinder; (Sub For Ah176871) (Sub Ah215738)	1
E6***88	O-Ring; (A), O-Ring; (B) (C), O-Ring; (B: W/O 5speed), O-Ring, O-Ring; (C), O-Ring; Not Illustrated, O-Ring; (B), O-Ring; (Use With Ah160785, Ah160790, Ah164940 And Ah204383), O-Ring; 82.271 X 1.778 mm (3.239" X 0.070"), O-Ring; 83mm I.D. (3-1/4"), O-Ring; (Sub For Mg272310), O-Ring; (A) (Sub For Gg350-32266), O-Ring; (Use With Ah160785)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (3-1/2" X 12") (Eaton Rephasing) (Depth Control)

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (3-1/2" X 12") (Eaton Rephasing) (Depth Control)

A4***85	End, End; (Use With An260360), End; (Use With An260477), End; (B), End; (Use With An260361), End; (Use With An240669), End; (Use With An260363), End; (Use With An240667), End; (Use With An260192), End; (Use With An240668)	1
AH***22	Seal Kit; (Use With Ah176443) Includes An260225 Piston Seal Kit, Seal Kit; (Use With Ah176678 Or Ah176677) Includes An260225 Piston Seal Kit, Seal Kit; (Use With Ah176602 And Ah176601), Seal Kit, Seal Kit; 3.50" (Use With Ah212683), Seal Kit; (Use With Ah176602), Seal Kit; (A: Seal), Seal Kit; (Use With Ah176875 And Ah212678), Seal Kit; (Sub For Ah176572, This Application), Seal Kit; (B: 41 Ft Machines) (Use With Ah176875), Seal Kit; (A: 29 Ft And 36 Ft Machines) (Use With Ah176875 And An212678), Seal Kit; Seal, Seal Kit; (Use With Ah210669), Seal Kit; (Use With Ah176325 And Ah176324), Seal Kit; (A: Seals), Seal Kit; (Use With Ah176364), Seal Kit; (Use With Ah176324), Seal Kit; (Use With Ah176875), Seal Kit; (Includes Parts Marked (A)), Seal Kit; (Use With Ah212683) Includes An260225 Piston Seal Kit, Seal Kit; 3.50" X 12", Seal Kit; (Use With Ah206686)	1
AH***75	Hydraulic Cylinder, Hydraulic Cylinder; (Sub Ah212678), Hydraulic Cylinder; 29 Ft And 36 Ft (Sub Ah212678), Hydraulic Cylinder; (A: 29 Ft And 36 Ft Machines) (John Deere) (Illustrated), (Sub Ah212678), Hydraulic Cylinder; (B: 41 Ft Machines) (John Deere) (Illustrated), (Sub Ah212678), Hydraulic Cylinder; (Sub Ah212678) (John Deere)(Illustrated)	1
AN***69	Hydraulic Cylinder; (A: 31-Ft. Base) (B: 36-Ft. Base) (C: 41-Ft. And 45-Ft. Base) (Eaton) (Sub Ah206686), Hydraulic Cylinder; (A: 29 Ft And 36 Ft Machines) 3.5" X 12" (Eaton), (Sub Ah176875 Sub Foraa53180, Prince Cylinder), Hydraulic Cylinder; (Sub Ah176875), Hydraulic Cylinder; 3.50" X 12" (Sub Ah176875), Hydraulic Cylinder; 3-1/2" X 12" (Sub Ah176875), Hydraulic Cylinder; (A: 23 Ft Machine) (Sub Ah176875), Hydraulic Cylinder; (Eaton) (Sub Ah206686), Hydraulic Cylinder; (A: 52-Ft. Base) (Eaton) (Sub Ah206686), Hydraulic Cylinder; (B: 37 Ft Machine) 3.50" X 12" (Sub Ah176875), Hydraulic Cylinder; (A: 31 Ft Machine) 3.50" X 12" (Sub Ah176875), Hydraulic Cylinder; 29 Ft And 36 Ft; 3.50" X 12" Prince Cylinder, (Sub Ah176875); Sub. For Aa53180, Hydraulic Cylinder; (B: 41 Ft Machines) 3.5" X 12" Prince Cylinder, (Eaton), (Sub Ah176875 Sub For Aa53180), Hydraulic Cylinder; (Eaton) (Sub Ah176875)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (3-1/2" X 24") (Prince) (Wing Fold)

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (3-1/2" X 24") (Prince) (Wing Fold)

14***88	Nut; (A) 9/16", 14.9-24, 16.9-24, Nut; 9/16, Nut; (A) 14.9-24 16.9-24 9/16", Nut; 9/16" (Sub For 42***31), Nut; (A: Also Includes Sn:) 9/16", Nut; 9/16" (Use With R141058 Or R201752), Nut; (A) 9/16", Nut; 9/16", (Sub For T21487), Nut; (A) 16.9-24, 9/16", Nut; (A) 14.9-24 16.9-24, Nut, Nut; 9/16", Nut; 9//6", Nut; 9/16" 9/16", Nut; (A) 16.9-24, 14.9-24, Nut; 9/16" (Use With R141058 Or R201742), Nut; 14.275 mm (9/16")	4
A4***62	Seal, Seal; (Kit Re37166), Kit; Bolt Kit - Mounting, Includes: Ref. 34 - 36, Kit; Package - Mounting Bolts, Includes: Ref. 34 - 36, Kit; Bolt, Kit; Package - Mounting Bolts	1
BT***5A	Nut; 28.575 mm (1-1/8"), Nut, Nut; 1-1/8", Nut; 28.575 mm (1-1/8") (Sub H29619), Nut; 28.575 mm	1
H1***32	Hydraulic Cylinder R	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (3-1/4" X 12")(Eaton Rephasing)(Depth Conrtol)

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (3-1/4" X 12")(Eaton Rephasing)(Depth Conrtol)

A4***85	End, End; (Use With An260360), End; (Use With An260477), End; (B), End; (Use With An260361), End; (Use With An240669), End; (Use With An260363), End; (Use With An240667), End; (Use With An260192), End; (Use With An240668)	1
AH***14	Seal Kit; (Includes Parts Marked (A)), Seal Kit; (Use With Ah176871), Seal Kit; Includes Parts Marked (A), Seal Kit; 3.25" X 12", Seal Kit; 3.25" (Use With Ah212751), Seal Kit; (Use With Ah176676 Or Ah176675)Includes An260224 Piston Seal Kit, Seal Kit; (Use With Ah212751) Includes An260224 Piston Seal Kit, Seal Kit, Seal Kit; (Use With Ah176871 And Ah212754), Seal Kit; (Use With Ah176676 Or Ah176675) Includes An260224 Piston Seal Kit, Seal Kit; (Use With Ah176448) Includes An260224 Piston Seal Kit	1
AH***71	Hydraulic Cylinder; (Sub Ah212754), Hydraulic Cylinder	1
AN***68	Hydraulic Cylinder; (A) (B) (Eaton) (Sub Ah176871), Hydraulic Cylinder; (Sub Ah176871), Hydraulic Cylinder; 3.25" X 12" (Sub Ah176871), Hydraulic Cylinder; 3-1/4 X 12" (Sub Ah176871), Hydraulic Cylinder; (A: 31 Ft Machine) 3.25" X 12" (Sub Ah176871)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (3-3/4" X 12") (Eaton Rephasing) (Depth Control)

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (3-3/4" X 12") (Eaton Rephasing) (Depth Control)

A4***66	End; (B: Items Included In Ae42001), End; Rear, End, End; (Use With An240670), End; (B)	1
AH***52	Hydraulic Cylinder K; 3.75" X 12", Hydraulic Cylinder K; (Use With Ah176900 Or Ah176899) Includes An260226 Piston Seal Kit, Hydraulic Cylinder K; 3.75" (Use With Ah212708), Hydraulic Cylinder K; (Use With Ah212708) Includes An260226 Piston Seal Kit, Hydraulic Cylinder K, Hydraulic Cylinder K; (Use With Ah176451) Includes An260226 Piston Seal Kit, Hydraulic Cylinder K; (Use With Ah206692), Hydraulic Cylinder K; (Includes Parts Marked (A)), Hydraulic Cylinder K; (Use With Ah176888), Hydraulic Cylinder K; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines) (Use With Ah176888 And Ah212713), Hydraulic Cylinder K; (A: 29 Ft And 36 Ft Machines) (Use With Ah176888 And Ah212713)	1
AH***88	Hydraulic Cylinder, Hydraulic Cylinder; (Sub Ah212713)	1
AN***70	Hydraulic Cylinder; (Eaton) (Sub Ah206692), Hydraulic Cylinder; (A: 23 Ft Machine), Hydraulic Cylinder; 3.75" X 12" (Sub Ah176888), Hydraulic Cylinder; (Sub Ah176888), Hydraulic Cylinder; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines) 3.75" X 12" Prince Cylinder, (Eaton), (Sub Ah176888 And Ah212713) ( Sub For Aa53182), Hydraulic Cylinder; (Sub Ah176888) 3.75" X 12", Hydraulic Cylinder; 1" Pin (Sub Ah176888), Hydraulic Cylinder; 41 Ft; 3.75" X 12" Prince Cylinder, (Sub Ah176888) Sub. For Aa53182, Hydraulic Cylinder; (B: 29 Ft Machine) (Sub Ah176888), Hydraulic Cylinder; 29 Ft And 36 Ft; 3.75" X 12" Prince Cylinder, Sub For Aa53182, Hydraulic Cylinder; 45 Ft; 3.75" X 12" Prince Cylinder, (Sub Ah176888 And Ah212713) Sub. For Aa53182, Hydraulic Cylinder; (A: 31-Ft. Base) (B: 36-Ft. Base) (C: 41-Ft. And 45-Ft. Base) (Eaton)(Sub Ah206692), Hydraulic Cylinder; 29 Ft And 36 Ft; 3.75" X 12" Prince Cylinder, (Sub Ah176888) Sub. For Aa53182, Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Eaton) (Sub Ah206692), Hydraulic Cylinder; (A: 52-Ft. Base) (Eaton) (Sub Ah206692), Hydraulic Cylinder; (B: 37 Ft Machine) 3.75" X 12" (Sub Ah176888), Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Eaton), Hydraulic Cylinder; (A: 29 Ft And 36 Ft Machines) 3.75" X 12" (Eaton), (Sub Ah176888 And Ah212713 Sub For Aa53182, Prince Cylinder)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (4" X 12") (Eaton Rephasing) (Depth Control)

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (4" X 12") (Eaton Rephasing) (Depth Control)

A4***08	End; X X X (Kit For An260199) (Kit For An260200), End, End; (B), End; (Use With An240671)	1
AH***76	Seal Kit; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines), Seal Kit; (Use With An240671) (Sub For An260237), Seal Kit; (Sub For An260237), Seal Kit; (Sub For An260237) (F), Seal Kit; (Sub For An260237) (E), Seal Kit; (Use With An240671 ) (Sub For An260237), Seal Kit, Seal Kit; (A: 29 Ft And 36 Ft Machines)	1
AN***71	Hydraulic Cylinder; 1" Pin, Hydraulic Cylinder; 4" X 12" (Sub Ah176855), Hydraulic Cylinder; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines) 4" X 12" Prince Cylinder, (Eaton), (Sub Ah176855 And Ah212781) (Sub For Aa53184), Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Sub Ah206690)(Eaton), Hydraulic Cylinder; (B: 29 Ft Machine), Hydraulic Cylinder; (Eaton) (Sub Ah206690), Hydraulic Cylinder; (A: 29 Ft And 36 Ft Machines) 4" X 12" Prince Cylinder, (Eaton), (Sub Ah176855 And Ah212781 ) (Sub For Aa53184), Hydraulic Cylinder; 53 Ft And 61 Ft; 4" X 12" Prince Cylinder, (Sub Ah176855 And Ah212781) Sub For Aa53184, Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Eaton) (Sub Ah206690), Hydraulic Cylinder; 45 Ft; 4" X 12" Prince Cylinder, (Sub Ah176855 And Ah212781) Sub. For Aa53184, Hydraulic Cylinder; (A: 23 Ft Machine), Hydraulic Cylinder; (Sub Ah176855), Hydraulic Cylinder; 29 Ft And 36 Ft; 4" X 12" Prince Cylinder, Sub For Aa53184, Hydraulic Cylinder; 41 Ft; 3.75" X 12" Prince Cylinder, Sub. For Aa53184, Hydraulic Cylinder, Hydraulic Cylinder; 45 Ft; 4" X 12" Prince Cylinder, (Sub Ah176855 And Ah212781)Sub. For Aa53184, Hydraulic Cylinder; (A: 52-Ft. Base) (Eaton) (Sub Ah206690)	1
L2***CU	O-Ring; 3-47/64" X 0.139", O-Ring; (B) External, Rod Guide, O-Ring; (A), O-Ring, O-Ring; (Kit Re37166), O-Ring; 94.844 X 3.531 mm 1/8 X 4-1/4, O-Ring; 94.844 X 3.531 mm, O-Ring; (B), O-Ring; 94.844 X 3.531 mm Incld In A, O-Ring; 94.844 X 3.531 mm (3-47/64" X 0.139"), O-Ring; Incld In A, O-Ring; (Kit Ah101170), O-Ring; 94.844 X 3.531 mm Incld In 0171344693, O-Ring; (A: Incld In 0171344693 Seal Kit) 94.844 X 3.531 mm	2

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (4" X 32") (John Deere) (Wing Fold)

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (4" X 32") (John Deere) (Wing Fold)

11***56	Cotter Pin; (Lift Assist Wheel), Cotter Pin; 8 X 50 mm, (Sub For T110927), Cotter Pin; 8 X 50 mm (0.315" X 1.969"), Cotter Pin; 8 X 50 mm, Cotter Pin; 8 X 50 mm (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (Sub A24072, This Application), Cotter Pin; 8 X 50 mm 7000 Series Tractors (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (With 1-1/4" Pin), Cotter Pin; (C) (D) 8 X 50 mm, Cotter Pin; (C) (D) (F) 8 X 50 mm, Cotter Pin; 8 X 50 mm Used On 1820 Drill To Secure Chain, Cotter Pin; (B: Used On 1820 Drill To Secure Chain) 8 X 50 mm	0
14***08	Nut; 5/8", (Sub 14h1083), Nut; 5/8",12.4-38,13.6-38 15.5-38,16.9-38,16.9-30, Nut; 5/8", Nut; 5/8",12.4-38,13.6-38, Nut; 5/8", Unf, Nut; (B) 5/8"	4
19***31	Bolt; 3/8" X 1" (Use With Ah120210), Bolt; 3/8" X 1", Used With Fiber Glass Seed Hopper, Bolt; (D: (Xxxxxx- ) 4050-00*52; 4250-0191; 4450-0229) 3/8" X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (Less Power Steering), Bolt; 3/8"X1" (Sub For R53664 Appl), Bolt; 3/8" X 1" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Bolt; 3/8" X 1", (A), (B), Bolt; (A: To Oil Pan) 3/8" X 1", Bolt; 3/8" X 1" Rear, Lh, Bolt; 3/8" X 1" (Sub For R82389), Bolt; 3/8" X 1-1/8", Bolt; 3/8" X 1" (Hs, Sae 8) (Use With Mg86504854), Bolt; 3/8" X 1", (Cornhead Attachment), Bolt; 3/8" X 1" (920-Use 19; 922, 924, 925-Use 24; 930-Use 29), Bolt; (Ord L62369, 19m7166), Bolt; 3/8" X 1", Code 2102, Bolt; 3/8" X 1", (Use With N214761), Bolt; (A: 75cc) 3/8" X 1", Bolt; 3/8" X 1", For 6-Tooth Section, Bolt; 3/8x1", Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1" (Not Used With Fenders), Bolt; 3/8" X 1", For 8-Tooth Section, Bolt; 3/8" X 1", (Use With Aw19004), Bolt; 3/8" X 1", (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1" (W/O Sgb), Bolt, Bolt; 3/8" X 1", (Use With R90561 This Application), Bolt; 3/8" X 1", (Rc, Ru, Rus), Bolt; 3/8" X 1", (Use With Re63295), Bolt; 3/8" X 1" Lh, Bolt; 3/8"X1" (Ord L62369, 19m7166), Bolt; (A) 3/8" X 1", (Oil Lines To Clutch Housing), Bolt; 3/8" X 1" (Sgb) Nlr, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; 3/8" X 1", Code 2314 (Af Only) (Fan To R90561), Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Hi-Crop), Bolt; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 1", Bolt; 3/8" X 1" (To Oil Pan), Bolt; 3/8" X 1", (13 Used, Rc And St) (11 Used, Ru And Or), Bolt; 3/8" X 1" (Ord L62369, 19m7166), Bolt; 3/8" X 1", 4020 Or 4010 Tractor, Bolt; (Sub For 19h1731), Cap Screw; (Use With R127394), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X1", Bolt; 3/8" X 1", (9 Used Gasoline, 8 Used Diesel), Bolt; 3/8" X 1" (Use With N10215), Bolt; 3/8" X 1", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 3/8" X 1" (Lh), Bolt; 3/8" X 1", (Ru And Or), Bolt; 3/8" X 1", (Sub For Hmx04057), Bolt; (A) 3/8"X1", Bolt; X X 3/8" X 1", Bolt; 3/8" X 1" (Use With Re63295), Bolt; (C) 3/8" X 1", Bolt; (C) 3/8"X1", Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel), Bolt; 3/8" X 1", 28" Rows Only, Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel) (Use With Dual Selective Control), Bolt; (A) (C) 3/8"X1", Bolt; 3/8" X 1" (Sub 19h3771, This Application), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1", (Use With 12h304), Bolt; 3/8" X 1" (Use With 14h732), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (Front), Bolt; (B) 3/8" X 1", (Not Used On 570), Bolt; 3/8" X 1" 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (6359tr), Bolt; (A: Mg803115 Light Kit) 3/8" X 1", Bolt; 3/8" X 1", (11 Used Gasoline) (10 Used Diesel) (Use With Single Selective Control), Bolt; 3/8" X 1", (5200), Bolt; 3/8" X 1", (12 Used Gasoline) (11 Used Diesel) (Less Selective Control), Bolt; 3/8" X 1", (Mower Bar), Bolt; 3/8" X 1", 7 mm (28") Rows, Bolt; 3/8" X 1", (24 And 224 Balers), Bolt; 3/8" X 1", 5720 Model Only, Bolt; 3/8" X 1", (Mower Bar Only), Bolt; 3/8"X1" (Sub For T22984), Bolt; (C: ( -Xxxxxx) 4055-0086; 4255-0080; 4455-0157) 3/8" X 1", Bolt; (B: Less Rockshaft) 3/8" X 1", Bolt; 3/8" X 1" (Order R46567), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; Ar, 3/8" X 1", Bolt; (C: (Xxxxxx- ) 4250-0096; 4450-0186) 3/8" X 1" (Sgb), Bolt; 3/8" X 1", (Use With H149504), Bolt; 3/8" X 1" (Use With Re508040), Bolt; 3/8" X 1", (Rc And St), Bolt; 3/8" X 1", (2 Used, North America) (1 Used, Europe), Bolt; 3/8" X 1", (Use With Ar77343), Bolt; 3/8" X 1" (Nla), Bolt; (B) (C) 3/8" X 1", Bolt; 3/8"X1", Bolt; 3/8" X 1", Full Thread, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Cap Screw; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1", (Sub 19h3771, This Application), Bolt; 3/8" X 1" (150 Per Cent Beater Speed) (Single-Range), Bolt; 3/8" X 1" (Sub For R53663, This Application), Bolt; 3/8" X 1" (Use With H99923), Bolt; 3/8" X 1", (Row-Crop), Bolt; 3/8" X 1" (4 Used, Rh; 5 Used, Lh), Bolt; 3/8" X 1", (Used With Gresen Valve), Bolt; 3/8" X 1" (For R500355), Bolt; 3/8" X 1", Ar, Bolt; 3/8" X 1", (31 Used, 6'; 43 Used, 8'), Bolt; 3/8" X 1" (To Front Frame), Bolt; (B: Mg803116 Warning Light Kit) 3/8" X 1", Bolt; (B: For 75cc Hydrostatic Pump) 3/8" X 1", Bolt; (B: W/O Sound-Gard Body) 3/8" X 1", Bolt; (E) 3/8" X 1", Bolt; (A) (B) 3/8" X 1", Bolt; 3/8" X 1", (Corn Head And Three Row Narrow Row-Crop Units), Bolt; 3/8" X 1" (8 Used Dual) (12 Used Triple), Bolt; (A) 3/8" X 1", (Or, Ut), Bolt; 3/8"X1, Bolt; 3/8" X 1" (Flexible), Bolt; 3/8" X 1", (675b) (Use With Mg622490), Bolt; 3/8"X1-1/8", Bolt; (D) 3/8" X 1", Bolt; 3/8" X 1" (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (4 Used, 347; 6 Used, 467), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Hs, Sae 8) (Sub 19h3771, This Application), Bolt; X 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (Use With Bp12233), Bolt; (A: Less Rockshaft) 3/8" X 1", Bolt; (A: Sound-Gard Body) 3/8" X 1", Bolt; 3/8" X 1", When Marker Arms Are Attached To Planter, Bolt; Retainer To Clutch Control Valve, Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1", (Single-Range) (150 Per Cent Beater Speed), Bolt; 3/8"X1" (Sub For R53663 Appl), Bolt; 3/8" X 1" (Sub For 22h836), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312), Bolt; 3/8" X 1", 4010 Or 4020 Tractor, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; 3/8" X 1", (K1) (K2), Bolt; 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1", (9 Used, Long Tongue) (5 Used, Short Tongue), Bolt; 3/8" X 1", (4 Used, A) (8 Used, B), Bolt; 3/8" X 1" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Bolt; 3/8" X 1" R.H., Bolt; (A) 3/8" X 1", Bolt; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 3/8" X 1" (Sub For R82389), Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (3 Used, 660,670) (5 Used, 671), Bolt; 3/8" X 1", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Bolt; 3/8" X 1" (Hydrostatic Drive), Bolt; 3/8" X 1", To Clutch Housing, Bolt; 3/8" X 1" (Less Rockshaft), Bolt; 3/8" X 1", 28-Inch Rows, Bolt; (E: (Xxxxxx- ) 4050-0007; 4250-0182; 4450-02**30) 3/8" X 1" (Sub For R82389), Bolt; 3/4"X1", Bolt; (B) 3/8" X 1" L.H., Bolt; 3/8" X 1", (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (5 Used Syncro-Range) (6 Used Power Shift), Bolt; (B: Used Without Warning Lamp) 3/8" X 1", Bolt; 3/8" X 1" (Use With H149504), Bolt; 3/8" X 1", (Lp-Gas), Bolt; (B: Hi-Crop) 3/8" X 1", Bolt; (K) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (Use With Ah120210)	1
24***45	Washer; 1-9/32" X 2" X 0.105" (A), Washer; 1-9/32" X 2" X 0.105" (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", Washer; .105" X 1-9/32" X 2", Washer; 1-9/32" X 2" X 0.105" (Used With 1-1/4" Pin), Washer; (B) 1-9/32" X 2" X 0.105", Washer; 32.537 X 50.800 X 2.667 mm (1-9/32" X 2" X 0.105"), Washer, Washer; (A: Up To Series 625 ( -06*43), 630 ( -0633)) 1-9/32" X 2" X 0.105", Washer; (A: Starting From Series Number 625 (0644- ), 630 (06*34- )) 1-9/32" X 2" X 0.105", Washer; 1-9/32" X 2" X 0.105" (With 1-1/4" Pin)	4

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (4-1/2" X 32") (John Deere) (Wing Fold)

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (4-1/2" X 32") (John Deere) (Wing Fold)

14***08	Nut; 5/8", (Sub 14h1083), Nut; 5/8",12.4-38,13.6-38 15.5-38,16.9-38,16.9-30, Nut; 5/8", Nut; 5/8",12.4-38,13.6-38, Nut; 5/8", Unf, Nut; (B) 5/8"	4
19***31	Bolt; 3/8" X 1" (Use With Ah120210), Bolt; 3/8" X 1", Used With Fiber Glass Seed Hopper, Bolt; (D: (Xxxxxx- ) 4050-00*52; 4250-0191; 4450-0229) 3/8" X 1", Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8" X 1", (Less Power Steering), Bolt; 3/8"X1" (Sub For R53664 Appl), Bolt; 3/8" X 1" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Bolt; 3/8" X 1", (A), (B), Bolt; (A: To Oil Pan) 3/8" X 1", Bolt; 3/8" X 1" Rear, Lh, Bolt; 3/8" X 1" (Sub For R82389), Bolt; 3/8" X 1-1/8", Bolt; 3/8" X 1" (Hs, Sae 8) (Use With Mg86504854), Bolt; 3/8" X 1", (Cornhead Attachment), Bolt; 3/8" X 1" (920-Use 19; 922, 924, 925-Use 24; 930-Use 29), Bolt; (Ord L62369, 19m7166), Bolt; 3/8" X 1", Code 2102, Bolt; 3/8" X 1", (Use With N214761), Bolt; (A: 75cc) 3/8" X 1", Bolt; 3/8" X 1", For 6-Tooth Section, Bolt; 3/8x1", Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1" (Not Used With Fenders), Bolt; 3/8" X 1", For 8-Tooth Section, Bolt; 3/8" X 1", (Use With Aw19004), Bolt; 3/8" X 1", (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1" (W/O Sgb), Bolt, Bolt; 3/8" X 1", (Use With R90561 This Application), Bolt; 3/8" X 1", (Rc, Ru, Rus), Bolt; 3/8" X 1", (Use With Re63295), Bolt; 3/8" X 1" Lh, Bolt; 3/8"X1" (Ord L62369, 19m7166), Bolt; (A) 3/8" X 1", (Oil Lines To Clutch Housing), Bolt; 3/8" X 1" (Sgb) Nlr, Bolt; (A: ( -Xxxxxx) Serial No. 8450-0053; 8650-0074) 3/8" X 1", Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8", Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; 3/8" X 1", Code 2314 (Af Only) (Fan To R90561), Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Hi-Crop), Bolt; (C: Part Of Ar109180 Adjustable Front Axle) 3/8" X 1", Bolt; 3/8" X 1" (To Oil Pan), Bolt; 3/8" X 1", (13 Used, Rc And St) (11 Used, Ru And Or), Bolt; 3/8" X 1" (Ord L62369, 19m7166), Bolt; 3/8" X 1", 4020 Or 4010 Tractor, Bolt; (Sub For 19h1731), Cap Screw; (Use With R127394), Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X1", Bolt; 3/8" X 1", (9 Used Gasoline, 8 Used Diesel), Bolt; 3/8" X 1" (Use With N10215), Bolt; 3/8" X 1", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 3/8" X 1" (Lh), Bolt; 3/8" X 1", (Ru And Or), Bolt; 3/8" X 1", (Sub For Hmx04057), Bolt; (A) 3/8"X1", Bolt; X X 3/8" X 1", Bolt; 3/8" X 1" (Use With Re63295), Bolt; (C) 3/8" X 1", Bolt; (C) 3/8"X1", Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel), Bolt; 3/8" X 1", 28" Rows Only, Bolt; 3/8" X 1", (10 Used Gasoline) (9 Used Diesel) (Use With Dual Selective Control), Bolt; (A) (C) 3/8"X1", Bolt; 3/8" X 1" (Sub 19h3771, This Application), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1", (Use With 12h304), Bolt; 3/8" X 1" (Use With 14h732), Bolt; 3/8" X 1" Rh, Bolt; 3/8" X 1" (Front), Bolt; (B) 3/8" X 1", (Not Used On 570), Bolt; 3/8" X 1" 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (6359tr), Bolt; (A: Mg803115 Light Kit) 3/8" X 1", Bolt; 3/8" X 1", (11 Used Gasoline) (10 Used Diesel) (Use With Single Selective Control), Bolt; 3/8" X 1", (5200), Bolt; 3/8" X 1", (12 Used Gasoline) (11 Used Diesel) (Less Selective Control), Bolt; 3/8" X 1", (Mower Bar), Bolt; 3/8" X 1", 7 mm (28") Rows, Bolt; 3/8" X 1", (24 And 224 Balers), Bolt; 3/8" X 1", 5720 Model Only, Bolt; 3/8" X 1", (Mower Bar Only), Bolt; 3/8"X1" (Sub For T22984), Bolt; (C: ( -Xxxxxx) 4055-0086; 4255-0080; 4455-0157) 3/8" X 1", Bolt; (B: Less Rockshaft) 3/8" X 1", Bolt; 3/8" X 1" (Order R46567), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; Ar, 3/8" X 1", Bolt; (C: (Xxxxxx- ) 4250-0096; 4450-0186) 3/8" X 1" (Sgb), Bolt; 3/8" X 1", (Use With H149504), Bolt; 3/8" X 1" (Use With Re508040), Bolt; 3/8" X 1", (Rc And St), Bolt; 3/8" X 1", (2 Used, North America) (1 Used, Europe), Bolt; 3/8" X 1", (Use With Ar77343), Bolt; 3/8" X 1" (Nla), Bolt; (B) (C) 3/8" X 1", Bolt; 3/8"X1", Bolt; 3/8" X 1", Full Thread, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Cap Screw; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1", (Sub 19h3771, This Application), Bolt; 3/8" X 1" (150 Per Cent Beater Speed) (Single-Range), Bolt; 3/8" X 1" (Sub For R53663, This Application), Bolt; 3/8" X 1" (Use With H99923), Bolt; 3/8" X 1", (Row-Crop), Bolt; 3/8" X 1" (4 Used, Rh; 5 Used, Lh), Bolt; 3/8" X 1", (Used With Gresen Valve), Bolt; 3/8" X 1" (For R500355), Bolt; 3/8" X 1", Ar, Bolt; 3/8" X 1", (31 Used, 6'; 43 Used, 8'), Bolt; 3/8" X 1" (To Front Frame), Bolt; (B: Mg803116 Warning Light Kit) 3/8" X 1", Bolt; (B: For 75cc Hydrostatic Pump) 3/8" X 1", Bolt; (B: W/O Sound-Gard Body) 3/8" X 1", Bolt; (E) 3/8" X 1", Bolt; (A) (B) 3/8" X 1", Bolt; 3/8" X 1", (Corn Head And Three Row Narrow Row-Crop Units), Bolt; 3/8" X 1" (8 Used Dual) (12 Used Triple), Bolt; (A) 3/8" X 1", (Or, Ut), Bolt; 3/8"X1, Bolt; 3/8" X 1" (Flexible), Bolt; 3/8" X 1", (675b) (Use With Mg622490), Bolt; 3/8"X1-1/8", Bolt; (D) 3/8" X 1", Bolt; 3/8" X 1" (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (4 Used, 347; 6 Used, 467), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Hs, Sae 8) (Sub 19h3771, This Application), Bolt; X 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1", (Variable Drive), Bolt; 3/8" X 1" (Use With Bp12233), Bolt; (A: Less Rockshaft) 3/8" X 1", Bolt; (A: Sound-Gard Body) 3/8" X 1", Bolt; 3/8" X 1", When Marker Arms Are Attached To Planter, Bolt; Retainer To Clutch Control Valve, Bolt; 3/8" X 1" 3/8" X 1", Bolt; 3/8" X 1", (Single-Range) (150 Per Cent Beater Speed), Bolt; 3/8"X1" (Sub For R53663 Appl), Bolt; 3/8" X 1" (Sub For 22h836), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8" X 1", Bolt; 3/8" X 1" (W/ Dc16312), Bolt; 3/8" X 1", 4010 Or 4020 Tractor, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; 3/8" X 1", (K1) (K2), Bolt; 3/8" X 1" (Hi-Crop), Bolt; 3/8" X 1" (17 Used, "In Position"; 15 Used, "Out Position"), Bolt; 3/8" X 1", (9 Used, Long Tongue) (5 Used, Short Tongue), Bolt; 3/8" X 1", (4 Used, A) (8 Used, B), Bolt; 3/8" X 1" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Bolt; 3/8" X 1" R.H., Bolt; (A) 3/8" X 1", Bolt; (D: (Xxxxxx- ) 4650-0164; 4850-0164) 3/8" X 1" (Sub For R82389), Bolt; X 3/8" X 1", Bolt; 3/8" X 1", (3 Used, 660,670) (5 Used, 671), Bolt; 3/8" X 1", Code 2300 And 2301 (Af, Tf) (Fan To Hub), Bolt; 3/8" X 1" (Hydrostatic Drive), Bolt; 3/8" X 1", To Clutch Housing, Bolt; 3/8" X 1" (Less Rockshaft), Bolt; 3/8" X 1", 28-Inch Rows, Bolt; (E: (Xxxxxx- ) 4050-0007; 4250-0182; 4450-02**30) 3/8" X 1" (Sub For R82389), Bolt; 3/4"X1", Bolt; (B) 3/8" X 1" L.H., Bolt; 3/8" X 1", (Use With R57425, R74124, R81234 Or R86703), Bolt; 3/8" X 1", (5 Used Syncro-Range) (6 Used Power Shift), Bolt; (B: Used Without Warning Lamp) 3/8" X 1", Bolt; 3/8" X 1" (Use With H149504), Bolt; 3/8" X 1", (Lp-Gas), Bolt; (B: Hi-Crop) 3/8" X 1", Bolt; (K) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (Use With Ah120210)	1
R2***75	Hydraulic Hose; Port V2, Hydraulic Hose; 16.358 X 2.210 mm, Incld In 29,31,37, Hydraulic Hose; (Use With Ar63911, Ar67095), Hydraulic Hose; Lh, Hydraulic Hose; (Sub For 51m4242 Appl), Hydraulic Hose; (A: Use With Filter Screen), Hydraulic Hose; 16.358 X 2.210 mm Incld In 7, Hydraulic Hose; (Kit Ah90688), Hydraulic Hose; (C: Surface Wrap), O-Ring, Hydraulic Hose; (E: Port V2), Hydraulic Hose; (Use With R49071), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 6,7, Hydraulic Hose;.644" I.D. (Sub For Mg128825), Hydraulic Hose; (A: For 9650 (-70*00) & 9750 (-7000)), Hydraulic Hose; (A: (-Xxxxxx) 4050-0043 (Qrt)), Hydraulic Hose; (2 Used Single And Dual Selective Control, 1 Used Triple Selective Control), Hydraulic Hose; With Dust Suppression, Hydraulic Hose; (Use With An191035), O-Ring; 16.358 X 2.210 mm (0.644" X 0.087"), Hydraulic Hose; (Use With Ar31674), Hydraulic Hose; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)), Hydraulic Hose; (B: 5410 (W/O Cab) -3447 (W/Cab) -3448), Hydraulic Hose; (4 Used Single Selective Control) (8 Used Dual Selective Control), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 4, Hydraulic Hose; (K), Hydraulic Hose; (C: (-Xxxxxx) Tractor Serial No. 8760-0018; 8960-0060), Hydraulic Hose; 20 mm X 15 mm X 2 mm (13/16" X 41/64" X 5/64"), Hydraulic Hose; (A: For Prodrive), Hydraulic Hose; (B: With Hydraulic Wing Control), Hydraulic Hose; (A: Rear - Isolated Open Operator Station, Cab) (B: Mid - Straddle Mount, Isolated Open Operator Station, Cab) (C: Dual Selective Control Valve), Hydraulic Hose; 1/8" X 1-1/2", Hydraulic Hose; (Sub For M45379), Hydraulic Hose; (A: Standard Flow - Long Drawbar) 16.358 X 2.210 mm, Hydraulic Hose; (Sub For R26448, This Application), Hydraulic Hose; 16.358 X 2.210 mm Incld In 5, Hydraulic Hose; 7.5/15" Dual Spacing, Hydraulic Hose; Motor And Pump Fittings, Hydraulic Hose; (Use With 5" X 16" Welded Prince Cylinder), Hydraulic Hose; (D: (Xxxxxx-) 4055-0101; 4255-0101; 4455-0201), Hydraulic Hose; (2 Used Single Selective Control) (4 Used Dual Selective Control), Hydraulic Hose; 16.358 X 2.210 mm Incld In 4, Hydraulic Hose; (B: 5210 (W/O Cab) 3222- (W/Cab) 3224-), Hydraulic Hose; (Dual Selective Control), Hydraulic Hose; (A: Without Hillmaster), Hydraulic Hose; (Use With H82308), Hydraulic Hose; Fro 4640 And 4840 Tractors, Hydraulic Hose; (A: For 9650 (-6900) & 9750 (-6900)), Hydraulic Hose; Less Power Rear Wheel Drive, O-Ring; (K3), Hydraulic Hose; (A: Incld In At101924 Pressure Relief Valve) 16.358 X 2.210 mm, Hydraulic Hose; (B: Incl In 0020038408 Valve, At32332 & At35123 Elbow Fittings, 0070013431 Fitting) 16.358 X 2.210 mm, Hydraulic Hose; M30, Hydraulic Hose; (Use With Ah140615 Or Ah167602), Hydraulic Hose; (A) (Pressure Compensated), Hydraulic Hose; 0.644"X0.087", Hydraulic Hose; 16.358 X 2.210 mm (0.644" X 0.087") (Use With Aa36455), Hydraulic Hose; (H: Port V2), Hydraulic Hose; (Use With Aa36455), Hydraulic Hose; (For Ar103522, Az37511), Hydraulic Hose; (A: Rear - Isolated Open Operator Station, Cab) (D: Triple Selective Control Valve), Hydraulic Hose; (A) 0.644" X 0.087", Hydraulic Hose; (Includes 2), Hydraulic Hose; For 5010, 5020, And 6030 Tractors, Hydraulic Hose; (B) (C), Hydraulic Hose; 16.358 X 2.210 mm Incld In 10, 33, 36, 55, Hydraulic Hose; 3/4" Diameter, Hydraulic Hose; (A: Install In 1 Select. Control Valve), Hydraulic Hose; 16.358 X 2.210 mm Incld In 17, Hydraulic Hose; 148 (-0400), 158 (-0400), 168, Hydraulic Hose; 16.358 X 2.210 mm (C), Hydraulic Hose; John Deere, Hydraulic Hose; (B: For 7000 Series Tractors), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 22, Hydraulic Hose; 8 Sae, Hydraulic Hose; (A: Universal Kit - Applications Will Vary), Hydraulic Hose; (D), O-Ring; (Cartridge To Motor/Pump) (Not Illustrated), Hydraulic Hose; (Use With R27237 And Ar31674), Hydraulic Hose; 16.358 X 2.210 mm (0.644" X 0.087") Use With R121415, Hydraulic Hose; (Kit Ar31946), Hydraulic Hose; 0.15 mm (.006"), Hydraulic Hose; (B: For Hillmaster Ii), Hydraulic Hose; 8000 Series Tractor, Hydraulic Hose; 16.358 X 2.210 mm, Incld In 3,21, Hydraulic Hose; (Sub For U10778), Hydraulic Hose; For Automatic Marker, Hydraulic Hose; (Without Automatic And Dial-A-Matic Header Height), Hydraulic Hose; (Use When Required), O-Ring; (Sub For At172912, This Application), Hydraulic Hose; (Use With R55137), Hydraulic Hose; (C: For Msl), Hydraulic Hose; (Use With Ah153774), Hydraulic Hose; (For Al31578 Or Al37218), Hydraulic Hose; (Use With An181495), Hydraulic Hose; Use Aa79336, For Aa36229 Hydraulic Hose, Hydraulic Hose; (C: Incld In R27237 Fitting) 16.358 X 2.210 mm, Hydraulic Hose; (C: Incld In R27237 Fitting, Cb11475577 Cylinder) 16.358 X 2.210 mm, Hydraulic Hose; (4 Used Dual) (6 Used Triple), Hydraulic Hose; 8r Wide, 12r Narrow, Optional For 8r Narrow, Hydraulic Hose; (A: All Except 9000 Series Tractors), Hydraulic Hose; (A) (Use With R77712), Hydraulic Hose; (For Al28230 Or Al38082), Hydraulic Hose; (2 Used, A) (4 Used, B), Hydraulic Hose; (Use With Aa40149), Hydraulic Hose; (As Required, Additional Function), Hydraulic Hose; (B: 5410 (W/O Cab) 3448- (W/Cab) 3449-), Hydraulic Hose; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors), Hydraulic Hose; (A: (-Xxxxxx) 4050-0063; 4250-0109; 4450-0208), Hydraulic Hose; (A) ((4) Rh, (2) Lh), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 15,20,21,29,41, Hydraulic Hose; (Sub For R375r), Hydraulic Hose; Without Motor Seal Drain, Hydraulic Hose; (D: (-Xxxxxx) Tsn 4650-0188; 4850-0026), Hydraulic Hose; (Sub Aa40149), Hydraulic Hose; For Ah19266, Hydraulic Hose; 5/8" I.D., Hydraulic Hose; (Sub For Kv20228), Hydraulic Hose; (For Al28230, Al38082), Hydraulic Hose; 16.358 X 2.210 mm Incld In 25, Hydraulic Hose; All Except 9000 Series Tractors, Hydraulic Hose; (Use With R49200), O-Ring; (K3) (K4), Hydraulic Hose; (F: Incld In R39112 Fitting) 16.358 X 2.210 mm, Hydraulic Hose; (3/4") (Open Center Valve), Hydraulic Hose; 16.358 X 2.210 mm Incld In 2, 6, Hydraulic Hose; (5 Used Single Selective Control) (7 Used Dual Selective Control), Hydraulic Hose; (B: W/O Hitch), Hydraulic Hose; (A) 16.358 X 2.210 mm (0.644" X 0.087"), Hydraulic Hose; Solenoid Test, Hydraulic Hose; (For Al31578, Al37218), Hydraulic Hose; (Sidehill), Hydraulic Hose; (Less Selective Control), Hydraulic Hose; (Use With R68385), Hydraulic Hose; 16.358 X 2.210 mm (0.644" X 0.087") In Port V2, Hydraulic Hose; 16.358 X 2.210 mm No. 5 Cylinder, Hydraulic Hose; High Pressure, Hydraulic Hose; (A: Universal Kit - Applications Will Vary) (Load Sense) (Nlr), Hydraulic Hose; (A: 5320n: Sn 2309- 5420n: Sn 2402- 5520n: Sn 2523-), Hydraulic Hose; 0.644" X 0.087", In Port V2, Hydraulic Hose; (C), Hydraulic Hose; (A), Hydraulic Hose; (For Az37511), Hydraulic Hose; L.H., Hydraulic Hose; 16.358 X 2.210 mm, Incld In 5,6, Hydraulic Hose; 16.358 X 2.210 mm (A), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 13,16, Hydraulic Hose; (High Pressure), Hydraulic Hose; (Use With Ar63911), Hydraulic Hose; (G), Hydraulic Hose; 2 cm (3/4"), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 1, Hydraulic Hose; 16.358 X 2.210 mm (0.644" X 0.087") John Deere, Hydraulic Hose; (A) (B), Hydraulic Hose; (Included In Kit Ah139151), Hydraulic Hose; (2 Used, Single Acting Cylinders), Hydraulic Hose; (A: For 6650 From Ser.No. 5094) (B: For 6750-6950 From Ser.No. 5092), Hydraulic Hose; (Use With R77712), Hydraulic Hose; (A: 9550 (-6900) 9550sh (-6900)), Hydraulic Hose; (Out), Hydraulic Hose; (For Al24244, Ar63911), Hydraulic Hose; (A: Isolated Open Operator Station) (B: With Cab) (C), Hydraulic Hose; (B: Incl In R27237 And 0070013431), Hydraulic Hose; (For Loaders Before Serial Number 3915), Hydraulic Hose; 16.358 X 2.210 mm Incld In 10, 11, Hydraulic Hose; (For Al24244), Hydraulic Hose; (For Cab), Hydraulic Hose; (A: Used In 5425 Orchard Tractor Too) (B: Used In High Clearance Tractors Too) (C: Used In 5725 Orchard Tractor Too), O-Ring; (Sub At210455), Hydraulic Hose; (B: 5210 (W/O Cab) -3221 (W/Cab) -3223), Hydraulic Hose; (Use With An193240), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 19, Hydraulic Hose; 16.358 X 2.210 mm Incld In 14, Hydraulic Hose; (B: 8000 & 9000 Series Tractors), Hydraulic Hose; Kit Ar31946, Hydraulic Hose; 16.358 X 2.210 mm, Incld In 2, Hydraulic Hose; (5 Used, 5440) (6 Used, 5460), Hydraulic Hose; 16.358 X 2.210 mm In Port V2, Hydraulic Hose; (B) 3/4", Hydraulic Hose; (Use With Ar67095), Hydraulic Hose; (2 Used Single) (4 Used Dual), Hydraulic Hose; (B: Incl In 0070013431, R27237 & 0071348773 Fittings, Aw32332 Elbow Fitting) 16.358 X 2.210 mm, Hydraulic Hose; (13.2 Or 15 Cfm), Hydraulic Hose; (Sub For Gg230-18574), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 10,11, Hydraulic Hose; (A: Isolated Open Operator Station/With Cab), Hydraulic Hose; (A: 9650 (-6900) & 9750 (-6900)), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 4,5, Hydraulic Hose; 16.358 X 2.210 mm, Incld In 3,21,52, Hydraulic Hose; (For Dc52644), Hydraulic Hose; 90° (3/4" Male Jic X 3/4" Male O-Ring), Hydraulic Hose; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Hydraulic Hose; 16.358 X 2.210 mm Incld In 21, 22, 39, 40, Hydraulic Hose; (Standard Axle), Hydraulic Hose; (A: 7.5/15" Dual Spacing), Hydraulic Hose; (2 Used Less Rockshaft), Hydraulic Hose; (3) Furnished With Additional Function, Hydraulic Hose; (Kit An153037), Hydraulic Hose; (A: For 55 & 60 Series Tractors W/E-H Hitch), Hydraulic Hose; (Use With Afh203227), Hydraulic Hose; (K1) (K2), Hydraulic Hose; "Iso", Hydraulic Hose; Plug, Hydraulic Hose; (Sub For Re47392), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 10, Hydraulic Hose; (A: Universal Kit - Applications Will Vary) (Pressure Compensated), Hydraulic Hose; (For R49071), Hydraulic Hose; (Use With R39112), Hydraulic Hose; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.), Hydraulic Hose; (B), Hydraulic Hose; 3/4", Hydraulic Hose; (A: For 9650 (6901-) & 9750 (6901-)), Hydraulic Hose; (A: Used In 5415 Orchard Too) (B: Used In High Clearance Tractors Too) (C: Used In 5715 Orchard Tractor Too), Hydraulic Hose; Kit Ar98993, Hydraulic Hose; (For Ar63911), Hydraulic Hose; (K: At167718 Replacement Cylinder Kit), Hydraulic Hose; (Use With Ar32667), Hydraulic Hose; (Includes 3,12,21,52), Hydraulic Hose; (A) (C), Hydraulic Hose; 16.358 X 2.210 mm Incld In 2, Hydraulic Hose; (F: Port V2), Hydraulic Hose; 45 Ft, Hydraulic Hose; (Kit Aa36073), Hydraulic Hose; (Use With R81742), Hydraulic Hose; (Sub For Z22678), Hydraulic Hose; (Use With R36426), Hydraulic Hose; (Kit Ah90686), Hydraulic Hose; (Kit Ar63929 And Ar63930), Hydraulic Hose; 16.358 X 2.210 mm, Hydraulic Hose; (Use With An153378), Hydraulic Hose; For Independent Marker, Hydraulic Hose; (Sub (2) Ah118398), O-Ring; (K1), Hydraulic Hose; Incld In 29,35, Hydraulic Hose; Optional, Hydraulic Hose; (Dual), Hydraulic Hose; 16.358 X 2.210 mm (0.644" X 0.087") (Use With R121415), Hydraulic Hose; 3 Used, (5 Used If Equipped W/Bale Push Bar And/Or Surface Wrap), Hydraulic Hose; 16.358 X 2.210 mm Incld In 10, Hydraulic Hose; 16.358 X 2.210 mm John Deere, O-Ring; (Standard) (Domestic), Hydraulic Hose; (Pkg. Of 5), Hydraulic Hose; (Sub For Mg128825), Hydraulic Hose; (4 Used Single Selective Control) (6 Used Dual Selective Control), Hydraulic Hose; (C: Standard Flow Long Drawbar) 16.358 X 2.210 mm, Hydraulic Hose; (Use With R44006 Or R49200), Hydraulic Hose; Conversion, For Combines With (Serial No. 6201-6200), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 2,3, Hydraulic Hose; (4 Used On Rod End) (2 Used On Base End), Hydraulic Hose; (A: 9550 (6901-) 9550sh (6901-)), Hydraulic Hose; Not Included In Bm19575, Hydraulic Hose; (A) 16.358 X 2.210 mm, Hydraulic Hose; (Sub For R26906), Hydraulic Hose; (D: Incld In R27237 Fitting) 16.358 X 2.210 mm, Hydraulic Hose; 16.358 X 2.210 mm, Incld In 11,12,14,16,18, Hydraulic Hose; (3 Used Less Selective Control, 2 Used Single And Dual Selective Control, 1 Used Triple Selective Control), Hydraulic Hose, Hydraulic Hose; 16.358 X 2.210 mm, Incld In 12,17, Hydraulic Hose; (Use With R51913), Hydraulic Hose; (C) 16.358 X 2.210 mm (0.644" X 0.087"), Hydraulic Hose; (For Al36926), Hydraulic Hose; For Gp-Tractors W/ Back Up Alarm, Hydraulic Hose; 0.644" X 0.087", Hydraulic Hose; (A: Surface Wrap) (B: Push Bar), Hydraulic Hose; (A: With Cab/Isolated Open Operator Station), Hydraulic Hose; (B: Less Hitch), Hydraulic Hose; (1 Used, Single Acting Cylinder), Hydraulic Hose; (1 Used, Single Acting Cylinders), Hydraulic Hose; (Use With Ar32665), Hydraulic Hose; (Used On 3010 Or 4010 Tractors Only), Hydraulic Hose; (A: 9550 (-6900) 9550sh (-6900)), Hydraulic Hose; (Sub Aa40149) John Deere, Hydraulic Hose; (A: Straddle Mount), Hydraulic Hose; Includes Dq16210 And Dq06112, Hydraulic Hose; (Use With At124317), Hydraulic Hose; (C: Incld In At32332 Elbow Fitting & R39112 Fitting) 16.358 X 2.210 mm, Hydraulic Hose; (A: High Flow) 16.358 X 2.210 mm (0.644" X 0.087"), Hydraulic Hose; (B: Incld In R27237 & 0070013431 Fittings) 16.358 X 2.210 mm, Hydraulic Hose; (Ord L152324), Hydraulic Hose; 16.358 X 2.210 mm, Incld In 5, Hydraulic Hose; (Sub For Ar30690), Hydraulic Hose; (A: W/ Secondary Brake), Hydraulic Hose; 16.358 X 2.210 mm Incld In 9, Hydraulic Hose; 16.358 X 2.210 mm Incld In 20, Hydraulic Hose; (K) (Sub For Mg128825), Hydraulic Hose; (A: For 9650 (7001-) & 9750 (70*01-)), Hydraulic Hose; (Sub Ah118397), Hydraulic Hose; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers), Hydraulic Hose; (A: W/Secondary Brake), Hydraulic Hose; (A: Incld In R27237 Fitting) 16.358 X 2.210 mm, Hydraulic Hose; 16.358 X 2.210 mm (0.644" X 0.087"), Hydraulic Hose; (A) (Load Sense), Hydraulic Hose; (A: For 4640, 4840 And 4850 Tractors.)	1
R8***98	Cap	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (4-1/4" X 12") (Eaton) (Depth Control)

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (4-1/4" X 12") (Eaton) (Depth Control)

AH***49	Seal; Wiper, Seal; (Kit An240614), Seal, Seal; (A), Seal; Included In An202541, Seal; (Kit An183539), Seal; (Kit Aa33084), Seal; (Kit An183538), Seal; (Use With Ae30482), Seal; (Use With Ae30483)	1
AH***78	Hydraulic Cylinder K; (Use With An240672) (Sub For An260238), Hydraulic Cylinder K; (Sub For An260238) (F), Hydraulic Cylinder K; (Sub For An260238) (G), Hydraulic Cylinder K; (Sub For An260238)	1
AH***73	Hydraulic Cylinder	1
AN***72	Hydraulic Cylinder; (Sub Ah176873) 4.25" X 12", Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Sub Ah176455) (Eaton), Hydraulic Cylinder; (B: 57-Ft. And 61-Ft. Base) (Eaton) (Sub Ah176455), Hydraulic Cylinder; 53 Ft And 61 Ft; 4.25" X 12" Prince Cylinder, (Sub Ah176873)Sub For Aa53186, Hydraulic Cylinder; (B: 29 Ft Machine) (Sub Ah176873), Hydraulic Cylinder; 1.25" Pin (Sub Ah176873), Hydraulic Cylinder; (Sub Ah176873), Hydraulic Cylinder; (Eaton) (Sub Ah176455), Hydraulic Cylinder; 45 Ft; 4.25" X 12" Prince Cylinder, (Sub Ah176873) Sub For Aa53186, Hydraulic Cylinder; 4.25" X 12" Prince Cylinder, (Eaton), (Sub Ah176873) (Sub For Aa53186)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder (Prince) (3" X 8" ) (Stabilizer)

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder (Prince) (3" X 8" ) (Stabilizer)

AA***54	End	1
AH***66	Fitting; (Sub R39112 And R26375) Plug With O-Ring, Fitting; (Sub R375r And R39112) For Independent Marker, Fitting; Incl.Key 17, Fitting; (Sub R26375 And R39112) (This Application Only), Fitting; (Sub R26375 And R39112, This Application), Fitting; (Sub R39112 And R26375, This Application), Fitting; (Sub R26375) O-Ring And (1) R39112 Plug), Fitting; (28 Foot) (Sub R375r And R39112), Fitting; (Sub R39112 And R375r), Fitting; (Sub R39112 And R26375) This Application Only, Fitting; (Sub Ae35771, This Application), Fitting; (Sub R26375 And R39112) This Application Only, Fitting; With O-Ring, Fitting; (Includes R26375), Fitting; Incl Key 20, Fitting; (Sub R26375) (O-Ring And One R39112 Plug) This Application Only, Fitting, Fitting; (Sub R375r And R39112) For Automatic Marker, Fitting; (Sub R39112 And R26375), Fitting; (A) (Sub R39112 And R26375), Fitting; (A) (B) (C), Fitting; Sub R39112 And R26375, This Application Only, Fitting; (Sub R375r And R39112), Fitting; (Sub R39112 Plug And R375r O-Ring), Fitting; (Sub R39112 And R26375, This Application) With O-Ring, Fitting; (Sub (2) R39112 And (2) R26375) Plug With O-Ring	2
AN***51	Hydraulic Cylinder; (Sub For Pt1210), Hydraulic Cylinder; (Sub For An163270), Hydraulic Cylinder; (Sub For An182674), Hydraulic Cylinder; 3 X 8, Hydraulic Cylinder; 3 X 8, (Sub For An163270), Hydraulic Cylinder; 3 X 8” (For 11 Thru 17-Foot Machines), (Sub For An182674), Hydraulic Cylinder; (Sub Ae51022), Hydraulic Cylinder, Hydraulic Cylinder; 3" X 8", (Sub An231450)	1
AN***75	Seal Kit; Seal, Includes Parts Marked "A", Seal Kit, Seal Kit; Seal, Includes Parts Marked (A)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder 3-1/2" X 12"

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder 3-1/2" X 12"

14***52	Nut; 22.225 mm, Torque 205-242 Lb-Ft (295-345 N-M) - Apply Loctite 271 To Rod Threads, Nut; 7/8", Unf, Nut; 7/8", Nut; 7/8" Unf, Nut; 7/8" (Use With Ah212762, Ah212751 Or Ah212683), Nut; 7/8" 7/8”, Nut, Nut; 22.225 mm, Torque 205-242 Lb-Ft (295-345 N-M), Nut; 22.225 mm, Torque To 205-242 Lb-Ft (295-345 N-M) - Apply Loctite 271 To Rod Threads, Nut; 7/8" 3.25" And 3.50", Nut; 7/8", (Sub For W40014)	1
AH***22	Seal Kit; (Use With Ah176443) Includes An260225 Piston Seal Kit, Seal Kit; (Use With Ah176678 Or Ah176677) Includes An260225 Piston Seal Kit, Seal Kit; (Use With Ah176602 And Ah176601), Seal Kit, Seal Kit; 3.50" (Use With Ah212683), Seal Kit; (Use With Ah176602), Seal Kit; (A: Seal), Seal Kit; (Use With Ah176875 And Ah212678), Seal Kit; (Sub For Ah176572, This Application), Seal Kit; (B: 41 Ft Machines) (Use With Ah176875), Seal Kit; (A: 29 Ft And 36 Ft Machines) (Use With Ah176875 And An212678), Seal Kit; Seal, Seal Kit; (Use With Ah210669), Seal Kit; (Use With Ah176325 And Ah176324), Seal Kit; (A: Seals), Seal Kit; (Use With Ah176364), Seal Kit; (Use With Ah176324), Seal Kit; (Use With Ah176875), Seal Kit; (Includes Parts Marked (A)), Seal Kit; (Use With Ah212683) Includes An260225 Piston Seal Kit, Seal Kit; 3.50" X 12", Seal Kit; (Use With Ah206686)	1
AH***13	Hydraulic Cylinder; (Sub For Ah176888)41 Ft, Hydraulic Cylinder; 45 Ft, 3.75" X 12" (Sub For Ah176888), Hydraulic Cylinder, Hydraulic Cylinder; (Sub For Ah176888), Hydraulic Cylinder; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines) (John Deere) (Illustrated), (Sub For Ah176888), Hydraulic Cylinder; (A: 29 Ft And 36 Ft Machines) (John Deere) (Illustrated), (Sub For Ah176888)	1
E6***88	O-Ring; (A), O-Ring; (B) (C), O-Ring; (B: W/O 5speed), O-Ring, O-Ring; (C), O-Ring; Not Illustrated, O-Ring; (B), O-Ring; (Use With Ah160785, Ah160790, Ah164940 And Ah204383), O-Ring; 82.271 X 1.778 mm (3.239" X 0.070"), O-Ring; 83mm I.D. (3-1/4"), O-Ring; (Sub For Mg272310), O-Ring; (A) (Sub For Gg350-32266), O-Ring; (Use With Ah160785)	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Cylinder 3-1/2" X 16"

John Deere : 680 - Plow, Chisel : Hydraulic Cylinder 3-1/2" X 16"

11***56	Cotter Pin; (Lift Assist Wheel), Cotter Pin; 8 X 50 mm, (Sub For T110927), Cotter Pin; 8 X 50 mm (0.315" X 1.969"), Cotter Pin; 8 X 50 mm, Cotter Pin; 8 X 50 mm (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (Sub A24072, This Application), Cotter Pin; 8 X 50 mm 7000 Series Tractors (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (With 1-1/4" Pin), Cotter Pin; (C) (D) 8 X 50 mm, Cotter Pin; (C) (D) (F) 8 X 50 mm, Cotter Pin; 8 X 50 mm Used On 1820 Drill To Secure Chain, Cotter Pin; (B: Used On 1820 Drill To Secure Chain) 8 X 50 mm	4
14***88	Nut; (A) 9/16", 14.9-24, 16.9-24, Nut; 9/16, Nut; (A) 14.9-24 16.9-24 9/16", Nut; 9/16" (Sub For 42***31), Nut; (A: Also Includes Sn:) 9/16", Nut; 9/16" (Use With R141058 Or R201752), Nut; (A) 9/16", Nut; 9/16", (Sub For T21487), Nut; (A) 16.9-24, 9/16", Nut; (A) 14.9-24 16.9-24, Nut, Nut; 9/16", Nut; 9//6", Nut; 9/16" 9/16", Nut; (A) 16.9-24, 14.9-24, Nut; 9/16" (Use With R141058 Or R201742), Nut; 14.275 mm (9/16")	4
19***84	Cap Screw; 3/8" X 7/8" (Also Order (2) 24h1305), Cap Screw; 3/8" X 7/8", (Dry Type Air Cleaner), Cap Screw; 3/8" X 7/8" (Rear), Cap Screw; (C) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (2501), Cap Screw; 3/8" X 7/8", Up, Cap Screw; 3/8"X7/8" (Sub For 19h1732), Cap Screw; 3/8" X 7/8", (Lower) (Power Shift), Cap Screw; 3/8" X 7/8" (For R122196), Cap Screw; 9.525 X 22.225 mm, Cap Screw; 3/8"X7/8" Appl, Cap Screw; 3/8"X7/8", (Sub For 19h1732), Cap Screw; 3/8" X 7/8" (Sub T53268, This Application), Cap Screw; 3/8" X 7/8" (Use With Re33058), Cap Screw; (B: (Xxxxxx-) 4555-01*00; 4755-0101; 4955-0149) 3/8" X 7/8", Cap Screw; 3/8" X 7/8" (Use With R62371), Cap Screw; (A), Cap Screw; (B: (Xxxxxx-) Esn 4650-3215; 4850-3246) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", 8650 Tractor, Cap Screw; 3/8" X 7/8" Radiator Support, Cap Screw; 3/8" X 7/8", (Ru And Or), Cap Screw; 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Ea-6), Cap Screw; 3/8" X 7/8", (Na-6, Gn-01), Cap Screw; 3/8" X 7/8", (Use With Re19268 And Re33058), Cap Screw; 3/8" X 7/8" Front Frame, Cap Screw; 3/8" X 7/8" (Use With Re63295), Cap Screw; 3/8" X 7/8", (Use With Ar87024 Or Ar87023), Cap Screw; 3/8" X 7/8", Cap Screw; (A: (-Xxxxxx) 4650-0177; 4850-01**15) 3/8" X 7/8", Cap Screw; 3/8" X 7/8" (Use With 14h812), Cap Screw; 3/8" X 7/8" (Rg),. Bolt, Cap Screw; 3/8" X 7/8" (Use With 12h304 And 14h812), Cap Screw; (A) 3/8" X 7/8", Cap Screw; (A) (B) 3/8" X 7/8", Cap Screw; 3/8"X7/8" (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (9 Used Diesel) (6 Used Gasoline), Cap Screw; 3/8" X 7/8", (Dn-02), Cap Screw; (B) 3/8"X7/8", Cap Screw; 3/8" X 7/8" (Sub At48506), Cap Screw; 3/8" X 7/8" (Less Power Take-Off), Cap Screw; 3/8" X 7/8" (4050), Cap Screw; 3/8" X 7/8", (Use With Re46821), Cap Screw; 3/8"X7/8" (Sub For 19h1732, 19h2245), Cap Screw; 3/8" X 7/8" Use With Ar91662, Cap Screw; 3/8" X 7/8", (Code 2909), Cap Screw; 3/8" X 7/8" Up, Cap Screw; 3/8"X7/8" (Sub For 19h1731), Cap Screw; 3/8" X 7/8", (Use With R62371), Cap Screw; 3/8" X 7/8", (Sub T53268, This Application), Cap Screw; (A: 75cc) 3/8" X 7/8", Cap Screw; 5/16"X1", Cap Screw; 3/8" X 7/8", (Use With R100259), Cap Screw; (Fan Pulley To Hub), Cap Screw; 3/8" X 7/8" (Use With 12h304), Cap Screw; 3/8" X 7/8", (2501,9177), Cap Screw; 3/8" X 7/8" (Sub For 19h1648, This Application), Cap Screw; 3/8" X 7/8", (Oil Bath Air Cleaner), Cap Screw; 3/8" X 7/8", (Diesel), Cap Screw; (D) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Upper), Cap Screw; 3/8" X 7/8", (Use With Re63295), Cap Screw; 3/8" X 7/8", (Gasoline And Lp-Gas), Cap Screw; 3/8"X7/8" (Sub For At20727), Cap Screw; 3/8" X 7/8", (Row-Crop And Standard) (2 Used Hi-Crop), Cap Screw; 3/8" X 7/8" (Use With R100259), Cap Screw; 3/8" X 7/8", (To Upper Rh Thermostat Housing) 6216, Cap Screw; 3/8" X 7/8", (Ru, Rc), Cap Screw; 3/8"X7/8", Cap Screw; 3/8" X 7/8" (5460, 5820, 8630, 8640, 8650), Cap Screw; 3/8" X 7/8", (Ea-D, Ea-G, De-01, Ge-01), Cap Screw; 3/8" X 7/8", (Use With Re33058), Cap Screw; 3/8" X 7/8", (5400), Cap Screw; (A) 3/8"X 7/8", Cap Screw; 3/8"X7/8" (Ord 19h1731), Cap Screw; (A) 3/8"X7/8", Mechanical Front Wheel Drive, Cap Screw; (B: Engine Serial No.) 3/8" X 7/8", Cap Screw; 3/8"X7/8" (W/ At19509), Cap Screw; (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (Motorola), Cap Screw; (B) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", Code 2306 And 2307, Cap Screw; (Lu) (Orchard Fenders), Cap Screw; 3/8"X7/8" (For Ce15214), Cap Screw; 3/8" X 7/8" (Front), Cap Screw; 3/8" X 7/8", (Orchard Fenders), Cap Screw; 3/8"X4", Cap Screw; (Orchard Fenders), Cap Screw; 3/8" X 7/8", (Use With Re33058), Cap Screw; 3/8" X 7/8" (Dn-03, Nb-D), Cap Screw; 3/8" X 7/8", Code 2310, Cap Screw; 3/8" X 7/8", (Use With R81911) Code 2501 And 2503, Cap Screw; 3/8" X 7/8", (Use Wite Re20982), Cap Screw; 3/8"X7/8" (For Al39725), Cap Screw; 3/8" X 7/8" 3/8" X 7/8", Cap Screw; X 3/2" X 7/8", Cap Screw; 3/8" X 7/8" (Use With Re55714), Cap Screw; 3/8" X 7/8" 3/8"X7/8", Cap Screw; (A) 3/8"X7/8", Cap Screw; 3/4" X 3/4", Cap Screw; 3/8" X 7/8", (Use With Re19265), Cap Screw; 3/8" X 7/8" (Use With R122196), Cap Screw; 3/8" X 7/8", (9 Used (A)) (6 Used (B)), Cap Screw; 3/8"X5/8", Cap Screw; (Use With Ar87023 Or Ar87024), Cap Screw; 3/8" X 7/8", (Use With Re33058 Re19268 And Ar66398), Cap Screw; 3/8"X7/8" (For At19509), Cap Screw; 3/8" X 7/8", (Use With Re30427), Cap Screw; (B: For 75cc Hydrostatic Pump) 3/8" X 7/8", Cap Screw; 9.525 X 22.225 mm (3/8" X 7/8"), Cap Screw, Cap Screw; 3/8" X 7/8", (Use With Ar77343), Cap Screw; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", (Use With Ar91662), Cap Screw; 3/8" X 7/8", (Use With Re20982), Cap Screw; Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 7/8" (Long), Cap Screw; 3/8" X 7/8", (Code 2819), Cap Screw; 3/8" X 7/8" (Sub For 19h2021 Appl), Cap Screw; 3/8" X 7/8", (Na-D, Na-G, Dn-01, Gn-01), Cap Screw; 3/8" X 7/8", (Use With Cover Marked R52880 0r Re27895), Cap Screw; 3/8" X 7/8", (Power Shift), Cap Screw; 3/8" X 7/8" (Use With Re19268 And Re33058), Bolt, Cap Screw; 3/8" X 7/8", (Use With Ar87023 Or Ar87024), Cap Screw; 3/8" X 7/8" (For Al39725), Cap Screw; 3/8" X 7/8", (Rs, Ut, Or, Rus), Cap Screw; (A) (B) (C) 3/8" X 7/8", Cap Screw; 3/8" X 7/8", Not Used This Application	1
24***45	Washer; 1-9/32" X 2" X 0.105" (A), Washer; 1-9/32" X 2" X 0.105" (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", (Included With Cylinder), Washer; 1-9/32" X 2" X 0.105", Washer; .105" X 1-9/32" X 2", Washer; 1-9/32" X 2" X 0.105" (Used With 1-1/4" Pin), Washer; (B) 1-9/32" X 2" X 0.105", Washer; 32.537 X 50.800 X 2.667 mm (1-9/32" X 2" X 0.105"), Washer, Washer; (A: Up To Series 625 ( -06*43), 630 ( -0633)) 1-9/32" X 2" X 0.105", Washer; (A: Starting From Series Number 625 (0644- ), 630 (06*34- )) 1-9/32" X 2" X 0.105", Washer; 1-9/32" X 2" X 0.105" (With 1-1/4" Pin)	4

See all parts with full part numbers in Heavy Parts AI →

Implement Warning And Tail Lights

John Deere : 680 - Plow, Chisel : Implement Warning And Tail Lights

19***48	Bolt; 1/4" X 3/4", Right-Hand, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle - 2 Used) (Bucket - 54 Used), Bolt; (B) 1/4" X 3/4", Bolt; 1/4" X 3/4", Bolt; 1/4" X 3/4", Hs, Sae 8, Bolt; (A: Install In 1 Select. Control Valve) 1/4" X 3/4", Bolt; 1/4" X 3/4" (To Transmission Sight Tube Bracket), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Bolt; 1/4" X 3/4", (Europe), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 66 Used), Bolt; 1/4" X 3/4", Not Used This Application, Cap Screw; 1/4" X 3/4", Bolt; 1/4" X 3/4", (84 Used For 714, 714a; 98 Used For 716, 716a), Bolt; 1/4"X3/4", Bolt; 1/4' X 3/4", Bolt; 1/4" X 3/4", (Use With Gd1072), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; (A) 1/4" X 3/4", Bolt; 1/4" X 3/4", Europe, Bolt; 1/4" X 3/4" (Use With 14h786 And 24h1286), Bolt; 1/4" X 3/4", (Sub For Mg88573), Bolt; 1/4" X 3/4" 1/4 X 3/4, Bolt; 1/4" X 3/4" (Sub For 19h1919, This Application), Bolt; 1/4" X 3/4" (A), (B), Bolt; 1/4" X 3/4", Sweden Only, Bolt; 1/4" X 3/4", (Sub For Hmx03107), Bolt; 1/4" X 3/4", (Use With 12h302 And 14h786), Bolt; (A: 6076trw07 Only) 1/4" X 3/4", Bolt; 1/4" X 3/4", 7000 Flex-Fold And 7100 Integral Planters Only, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle-2 Used; Bucket-96 Used), Bolt; 1/4" X 3/4" (Use With 14h786), Bolt; 1/4" X 3/4", Herbicide Only, Bolt; 1/4" X 3/4", (Not Used W/E55662), Bolt; 1/4"X3/4, (Use With Ar91662, Re30685), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used), Bolt; 1/4"X3/4 (For Ar91662, Re30685), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4" (911), Bolt; 1/4" X 3/4" (A), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle), Cap Screw, Bolt; (A: ( -Xxxxxx) 8560-00*03; 8760-0051; 8960-00**14) 1/4" X 3/4", Bolt; (Use With Pt17843 Windowpane), Bolt; 1/4" X 3/4" Amber, Bolt; 1/4" X 3/4", (4402,4403), Bolt; 1/4" X 3/4", Amber, Bolt; (C) 1/4" X 3/4", Bolt; 1/4" X 3/4", 28" Rows Only, Bolt, Bolt; 1/4" X 3/4" (Sub For At216052), Bolt; 1/4" X 3/4", Germany And Italy, Bolt; 6.350 X 19.050 mm, Bolt; 1/4" X 3/4", (4408,4409), Bolt; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4" X 3/4", Bolt; (A) 1/4"X3/4", Bolt; 1/4" X 3/4", Small Hopper, Bolt; X 1/4" X 3/4", Bolt; 1/4" X 3/4" 1/4" X 0.75" (Sub For R138749), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle), Bolt; 1/4" X 3/4" (Europe), Bolt; 1/4" X 3/4", (56 Used For 714, 714a; 64 Used For 716, 716a), Bolt; 1/4" X 3/4", (Code 1637), Bolt; 1/4" X 3/4" (Not Illustrated), Cap Screw; 6.350 X 19.050 mm, Bolt; (A) R.Bosch,1/4"X3/4", Bolt; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4" X 3/4", Bolt; 1/4" X 3/4", (4402-4403), Bolt; 1/4" X 3/4" 1/4 X 3/4", Bolt; (A) 6.350 X 19.050 mm (1/4" X 3/4"), Cap Screw; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Bolt; 1/4" X 3/4" (4408-4409), Bolt; 1/4" X 3/4", ((3) Less Cab) ((2) Cab), Bolt; 1/4" X 3/4" For Steel Cleaning Paddles, Bolt; 1/4" X 3/4", ((3) Used Less Cab, (2) Used With Cab), Bolt; (C) (D) 1/4" X 3/4", Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Bolt; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4" (For Az100822), Bolt; 1/4" X 3/4" (8630), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 96 Used), Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used)	2
AH***25	Plug; (Sub 57m8340), Plug; (B), Plug; 7-Way, Plug; Outlet, Plug, Plug; (E), Plug; (7-Pin), Plug; 7-Pin, Plug; (Sub 57m8340) 7 Pin, Plug; (Sub 57m8340)Seven-Way, Plug; 7-Way, (Sub 57m8340), Plug; (Sub 57m8340)(7-Way), Plug; 7 Pin, Plug; 7 Way, Plug; 7-Pin Plug, Plug; (C), Plug; (Electrical Outlet Male Plug)	1
AN***99	Hose Clamp; Tube, Hose Clamp; (A), Hose Clamp; (B), Hose Clamp; 5-1/2" Maximum, Hose Clamp; (12'-2" Through 15'-0"), Hose Clamp; (A) (B), Hose Clamp, Hose Clamp; 4-5/8" X 5-1/2", Hose Clamp; 11' And 17' Base, Hose Clamp; Large Clamp, Hose Clamp; (11' Rigid), Hose Clamp; 4" X 4', Hose Clamp; 4" X 4"	3
AN***89	Bracket; With Reflectors, Bracket; Lamp (Includes Red Reflector), Bracket; Includes Red Reflector, Bracket; (Includes Reflector) (Sub For N231841)	2

See all parts with full part numbers in Heavy Parts AI →

Jackstand

John Deere : 680 - Plow, Chisel : Jackstand

24***25	Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00*00-), 370 (0000-) And 390 (0000-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-0082), 370 (-0093) And 390 (-00*80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334)	1
AA***92	Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00*26; 7700-0020; 7800-01**50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650	1
AE***14	Jack; (Sub For Ac15349 Or Aa20955), Jack, Jack; (Sub For Aa20955)	1
E5***67	Nut; 1/2", Nut; Push, Nut, Nut; (Sub For Et13846)	1

See all parts with full part numbers in Heavy Parts AI →

Level Lift

John Deere : 680 - Plow, Chisel : Level Lift

11***21	Cotter Pin, Cotter Pin; 3/8" X 2-1/2", Cotter Pin; 3/8" X 2-1/2", Use With Quik-Coupler, Cotter Pin; 3/8" X 2-1/2" (Use With T125931 Or T125926), Cotter Pin; 3/8" X 2-1/2" (Use With Au42333 Or T125926)	2
11***56	Cotter Pin; (Lift Assist Wheel), Cotter Pin; 8 X 50 mm, (Sub For T110927), Cotter Pin; 8 X 50 mm (0.315" X 1.969"), Cotter Pin; 8 X 50 mm, Cotter Pin; 8 X 50 mm (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (Sub A24072, This Application), Cotter Pin; 8 X 50 mm 7000 Series Tractors (Lift Assist Wheel), Cotter Pin; 8 X 50 mm (With 1-1/4" Pin), Cotter Pin; (C) (D) 8 X 50 mm, Cotter Pin; (C) (D) (F) 8 X 50 mm, Cotter Pin; 8 X 50 mm Used On 1820 Drill To Secure Chain, Cotter Pin; (B: Used On 1820 Drill To Secure Chain) 8 X 50 mm	6
14***64	Nut; (A: 'For Machines 13999 And Prior Order (1) N242874, (1)14h964, (1) N278462) 1-1/2", Nut; (B) (C) (D) 1-1/2", Nut; (E) 1-1/2", Nut; (B) (C) 1-1/2", Nut; (B: 32'-6" To 41'-6") 1-1/2", Nut; 1-1/2" (Sub An240487), Nut; 1-1/2"	1
19***14	Screw; 1" X 5-1/4" (Hs, Sae 8), Screw; (B: 32'-6" To 41'-6") 1" X 5-1/4" (Hs, Sae 8), Screw; 1" X 5-1/4"	1

See all parts with full part numbers in Heavy Parts AI →

Level Lift And Floating Hitch

John Deere : 680 - Plow, Chisel : Level Lift And Floating Hitch

24***82	Washer; 1-5/32" X 2-1/2" X 0.120" Used As Shims, Washer; 1-5/32" X 2-1/2" X 0.120"	4
24***84	Washer; 30.175 X 63.500 X 1.524 mm (1-3/16" X 2-1/2" X 0.060"), Washer; 1-3/16" X 2-1/2" X 0.060"	4
A2***77	Lock Nut; 28.575 mm, Lock Nut; (E) 1-1/8", Lock Nut, Lock Nut; 28.575 mm (1-1/8"), Lock Nut; 1-1/8", Lock Nut; 1-1/8", (Sub 14h887), Lock Nut; (Sub 14h887), Lock Nut; (B) (C) (D) 1-1/8"	2
A2***65	Strap; Use If No Safety Chain Only	1

See all parts with full part numbers in Heavy Parts AI →

Main Frame And Extension

John Deere : 680 - Plow, Chisel : Main Frame And Extension

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	0
19***41	Cap Screw; 5/8" X 3-1/4" (Sae 8) (For R122201, R128399), Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8) (With Cab), Cap Screw; 5/8" X 3-1/4", (540 Or 1000 Rpm), Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8) (17 X 7 And 20 X 6 Disk) (9 X 14 And 12 X 10 Hoe), Cap Screw; 5/8" X 3-1/4", Cap Screw; 5/8" X 3-1/4" (Sae 8), For R122201, R128399, Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8) (4 Used, 53 Thru 59-Foot Machine), Cap Screw; (C) (D) (E) 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8), (For 25 Thru 27-Foot Models Only), Cap Screw; 5/8" X 3-1/4" 5/8"X3" (Sub For 19h1863), Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8 ), Cap Screw, Cap Screw; (B) 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; (A) 5/8" X 3-1/4" (Hs, Sae 8), Cap Screw; 15.875 X 82.550 mm, Cap Screw; 5/8" X 3-1/4" (Sub For 19h1863), Cap Screw; 15.875 X 82.550 mm (5/8" X 3-1/4"), Cap Screw; 5/8" X 2-3/4" (Sub For R64802 Appl), Cap Screw; (A) 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; 5/8" X 3-1/4" 15.875x76.200mm (Sub For 19h1863), Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8) (3 And 4 Unit), Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 3-1/4" Hs, Sae 8, 5/8" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8" X 3-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8) (4-7 Ft., 8-11 Ft.), Cap Screw; 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; 5/8" X 3-1/4", Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8), Cap Screw; 5/8" X 3-1/4" Hs, Sae 8, Cap Screw; 5/8" X 3-1/4" Install Using Loctite 271 And Primer Torque (Lub) 160 Lb-Ft (215 N-M), Cap Screw; 5/8" X 3-1/4" (Sae 8), Cap Screw; 5/8"X2-3/4" (Sub For R64802 Appl), Cap Screw; 5/8" X 3-1/4" (Sae 8, For R122201, R128399), Cap Screw; 5/8"X3-1/4"	8
19***74	Cap Screw; (D) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Sub For 19h3353), Cap Screw; (A) (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 11 Thru 27-Foot Machines), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 23 Thru 27-Foot Machines), Cap Screw; (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" Lh, Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; (A) (B) (C) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Use With 14h800), Cap Screw; 5/8" X 5-1/4", Cap Screw; 5/8"X5-1/4", Cap Screw; 5/8" X 5-1/4", Shear Bolt, Hs, Sae 8; Standard Spacing - 510 mm (20") Only, Cap Screw; 5/8" X 5-1/4", (Hs, Sae 8) (For Use With 5 Or 6 Levers), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8) (For 23' Thru 28'4" Machines)	20
AN***91	Extension; 12", Extension; 12" Stub Bar, Extension; 294 mm (12")	1

See all parts with full part numbers in Heavy Parts AI →

Main Frame Rockshaft (11' Main Frame With Floating Hitch)

John Deere : 680 - Plow, Chisel : Main Frame Rockshaft (11' Main Frame With Floating Hitch)

08***10	Bolt; (D: 12r38) 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (8 X 10 Frame), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Use With 8”X10” Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12") 8, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2", Bolt; 5/8"X12-1/2", Bolt; (A) 8, (5/8"X12"), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), 8"X10" Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8 (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8.(5/8"X12"), Bolt; 5/8" X 12-1/2", Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, Bolt; (D) (E) 5/8" X 12-1/2", Bolt; 5/8" X 12-1/2" U/W 8 X 10 Tube (Hs, Sae 8), Bolt; 5/8" X 12-1/2" Use With 8 X 10 Tube, (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (U/W 8 X 10) Tube (Hs, Sae 8)	8
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
A5***92	Bushing; 45 Ft, 53 Ft And 61 Ft, Bushing; For 1-1/4" Pin, 41', Bushing, Bushing; (1-1/4" Pin), Bushing; 1-1/4" I.D., Bushing; 57' And 61', Bushing; For 1-1/4" Pin, Bushing; 1-1/4" I.D. 41', Bushing; 1.502" X 1.525" X 1"	1
AN***34	Bearing Cap; (Udes Jd7844 - Not Used In This Application), Bearing Cap, Bearing Cap; Upper	4

See all parts with full part numbers in Heavy Parts AI →

Main Frame Rockshaft (13' Main Frame With Floating Hitch)

John Deere : 680 - Plow, Chisel : Main Frame Rockshaft (13' Main Frame With Floating Hitch)

08***10	Bolt; (D: 12r38) 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (8 X 10 Frame), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Use With 8”X10” Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12") 8, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2", Bolt; 5/8"X12-1/2", Bolt; (A) 8, (5/8"X12"), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), 8"X10" Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8 (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8.(5/8"X12"), Bolt; 5/8" X 12-1/2", Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, Bolt; (D) (E) 5/8" X 12-1/2", Bolt; 5/8" X 12-1/2" U/W 8 X 10 Tube (Hs, Sae 8), Bolt; 5/8" X 12-1/2" Use With 8 X 10 Tube, (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (U/W 8 X 10) Tube (Hs, Sae 8)	10
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	10
AN***34	Bearing Cap; (Udes Jd7844 - Not Used In This Application), Bearing Cap, Bearing Cap; Upper	5
AN***08	Rockshaft	1

See all parts with full part numbers in Heavy Parts AI →

Main Frame Rockshaft For Tandem Wheels (11' Main Frame)

John Deere : 680 - Plow, Chisel : Main Frame Rockshaft For Tandem Wheels (11' Main Frame)

08***10	Bolt; (D: 12r38) 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (8 X 10 Frame), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Use With 8”X10” Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12") 8, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2", Bolt; 5/8"X12-1/2", Bolt; (A) 8, (5/8"X12"), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), 8"X10" Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8 (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8.(5/8"X12"), Bolt; 5/8" X 12-1/2", Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, Bolt; (D) (E) 5/8" X 12-1/2", Bolt; 5/8" X 12-1/2" U/W 8 X 10 Tube (Hs, Sae 8), Bolt; 5/8" X 12-1/2" Use With 8 X 10 Tube, (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (U/W 8 X 10) Tube (Hs, Sae 8)	8
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
A5***92	Bushing; 45 Ft, 53 Ft And 61 Ft, Bushing; For 1-1/4" Pin, 41', Bushing, Bushing; (1-1/4" Pin), Bushing; 1-1/4" I.D., Bushing; 57' And 61', Bushing; For 1-1/4" Pin, Bushing; 1-1/4" I.D. 41', Bushing; 1.502" X 1.525" X 1"	1
AN***34	Bearing Cap; (Udes Jd7844 - Not Used In This Application), Bearing Cap, Bearing Cap; Upper	4

See all parts with full part numbers in Heavy Parts AI →

Main Frame Rockshaft For Tandem Wheels (13' Main Frame)

John Deere : 680 - Plow, Chisel : Main Frame Rockshaft For Tandem Wheels (13' Main Frame)

08***10	Bolt; (D: 12r38) 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (8 X 10 Frame), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Use With 8”X10” Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12") 8, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2", Bolt; 5/8"X12-1/2", Bolt; (A) 8, (5/8"X12"), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), 8"X10" Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8 (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8.(5/8"X12"), Bolt; 5/8" X 12-1/2", Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, Bolt; (D) (E) 5/8" X 12-1/2", Bolt; 5/8" X 12-1/2" U/W 8 X 10 Tube (Hs, Sae 8), Bolt; 5/8" X 12-1/2" Use With 8 X 10 Tube, (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (U/W 8 X 10) Tube (Hs, Sae 8)	10
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	10
AN***34	Bearing Cap; (Udes Jd7844 - Not Used In This Application), Bearing Cap, Bearing Cap; Upper	5
AN***48	Rockshaft	1

See all parts with full part numbers in Heavy Parts AI →

Over-Center Fold Hinges

John Deere : 680 - Plow, Chisel : Over-Center Fold Hinges

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
19***69	Cap Screw; 5/8" X 3-1/2" 3-Section, Cap Screw; 5/8" X 3-1/2", Cap Screw; (A) 5/8" X 3-1/2", (Hs, Sae 8), Cap Screw; 5/8" X 3-1/2", R.H., Cap Screw; 5/8" X 3-1/2", (Hs, Sae 8), Cap Screw; (A) 5/8" X 3-1/2", Cap Screw; 15.875 X 88.900 mm (5/8" X 3-1/2"), Cap Screw; 5/8" X 3-1/2", Sae 8, Cap Screw; Hs, Sae 8, 5/8" X 3-1/2", Cap Screw; (A) 5/8"X3-1/2", Cap Screw; 5/8"X3-1/2", Cap Screw; 0,625" X 3,5", Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8) Main Frame Hinge, Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8), Cap Screw; (A: Two Weights) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", Main Frame Hinge, Cap Screw; (A: Two Weights) 5/8" X 3-1/2" (Hs, Sae 8), Cap Screw; 5/8" X 3-1/2", Hs, Sae 8, Cap Screw; 5/8" X 3-1/2" (Optional), Cap Screw; 5/8" X 3-1/2" R.H., Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8) (With Light Bracket), Cap Screw; 5/8" X 3-1/2" Install Using Loctite 271 & Primer Torque (Lub) 160 Lb-Ft (215 N-M)	0
19***44	Cap Screw; (A) 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Sae 8) Up, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4" Inner, Cap Screw, Cap Screw; 5/8" X 2-1/4" Hs, Sae 8, Cap Screw; 5/8" X 2-1/4" Hs=8 Sae, Cap Screw; (C) 5/8" X 2-1/4", Hs, Sae 8, Cap Screw; (J) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Sae 8) Up, Cap Screw; 5/8" X 2-1/4" (Rh Side), Cap Screw; 5/8" X 2-1/4", Up, Cap Screw; 5/8" X 2-1/4", Hs, Sae 8,, Cap Screw; 5/8" X 2-1/4" Hs 8 Sae, Cap Screw; 5/8" X 2-1/4", Hs, Sae 8, Cap Screw; 5/8"X2-1/4", Cap Screw; (C: Code 4402 Electronic Tach) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Hs, Sae 8) (Use With 18.4-38, 20.8-34 Or 23.1-30 Tires), Cap Screw; 5/8" X 2-1/4", (Code 1405)	4
A3***84	Pin; 8.331 X 38.100 mm, Pin; (15' (4.6 M)) (Sub N281171), Pin; 8.331 X 38.100 mm (21/64" X 1-1/2"), Pin; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 8.331 X 38.100 mm, Pin; Spring, Pin; (Sub For A35642), Pin; Solid (15' (4.6 M)) (Sub N281430 And N281171), Pin, Pin; 8.331 X 38.100 mm (21/64" X 1-1/2") (Sub For E63018), Pin; 21/64" X 1-1/2", Pin; 9 Standard, Pin; 21/64" X 1-1/2", (Sub For E63018) This Application Only, Pin; 7.925 X 38.100 mm (5/16" X 1-1/2")	2

See all parts with full part numbers in Heavy Parts AI →

Over-Center Fold Plates And Wing Stops (Drawn Flexible 13' Main Frame)

John Deere : 680 - Plow, Chisel : Over-Center Fold Plates And Wing Stops (Drawn Flexible 13' Main Frame)

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	0
19***23	Cap Screw; 5/8"X5-1/2", Cap Screw; 5/8" X 5-1/2" (For R64100), Cap Screw; 5/8" X 5-1/2" (For 25 And 27-Foot Only), Cap Screw; (B) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (4 Used, 47 Thru 51-Foot Machine), Cap Screw; Low, 5/8"X5-1/2", Cap Screw; 5/8" X 5-1/2" (Use With Mechanical Depth Control), Cap Screw; 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Sub For T20089 And 19h2351, This Application), Cap Screw; (A: Narrow) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Use With N138383), Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", Bwa Only, Cap Screw; Low, 5/8" X 5-1/2", Cap Screw; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" X 5-1/2" (Sub For 19h3174, 19m8019), Cap Screw; (C) 5/8" X 5-1/2", Cap Screw; (A: Main Frame, Wingframe (3 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer) 5/8" X 5-1/2", Cap Screw; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (For 4" X 4" Frame), Cap Screw; 5/8" X 5-1/2" (For 23 Thru 27-Foot Machines), Cap Screw; 5/8" X 5-1/2", (Used On 24-Ft And 30-Ft Models), Cap Screw; (D) 5/8" X 5-1/2", Cap Screw; (A) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (With Drawbar Offset-Front Hole), Cap Screw; (A) (B) (C) 5/8" X 5-1/2", On Right Rear Frame, Outer End, Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Used On 24 And 30 Ft.), Cap Screw; 15.875 X 139.700 mm (5/8" X 5-1/2"), Cap Screw; 5/8" X 5-1/2", (For 23' Thru 28'4" Machines), Cap Screw; (D) 5/8" X 5-1/2", On Right Rear Frame, Outer End, Cap Screw; 5/8" X 5-1/2", For 4" X 4" (102 X 102 mm) Frame (Lower), Cap Screw; 5/8" X 5-1/2", Lower Holes, Cap Screw; 5/8" X 5-1/2" Wide, Cap Screw; (B) (C) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 5-1/2", Lower Holes (For 6359d Engine), Cap Screw; 5/8" X 5-1/2", (For 102 X 102 mm (4" X 4") Frame), Cap Screw; (A: 27 Ft - 9 In) (B: 30 Ft - 9 In (Illustrated)) 5/8" X 5-1/2", Cap Screw; (E) 5/8" X 5-1/2"	4
19***74	Cap Screw; (D) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Sub For 19h3353), Cap Screw; (A) (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 11 Thru 27-Foot Machines), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 23 Thru 27-Foot Machines), Cap Screw; (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" Lh, Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; (A) (B) (C) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Use With 14h800), Cap Screw; 5/8" X 5-1/4", Cap Screw; 5/8"X5-1/4", Cap Screw; 5/8" X 5-1/4", Shear Bolt, Hs, Sae 8; Standard Spacing - 510 mm (20") Only, Cap Screw; 5/8" X 5-1/4", (Hs, Sae 8) (For Use With 5 Or 6 Levers), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8) (For 23' Thru 28'4" Machines)	12
19***25	Cap Screw; 3/4" X 6-1/2", Hex. Hd., Cap Screw; (D) 3/4" X 6-1/2", (Sub For R53020) (Also Order 14h1058), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8) (12'-2" Through 15'-0"), Cap Screw; 3/4" X 6-1/2" (5 X 7 Frame), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8) (12'2" Through 15'0"), Cap Screw; 3/4" X 6-1/2", Hs, Sae 8, Cap Screw; 19.050 X 165.100 mm (3/4" X 6-1/2") (Hs, Sae 8), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8), Cap Screw; (D) 3/4" X 6-1/2", (Sub For R53020), Cap Screw; 3/4" X 6-1/2", (Sub For R53020), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8) Wide Axle, (Sub For R53020), Cap Screw; 3/4" X 6-1/2" Hs=10.9, Sae 8, Cap Screw; (Sub For R53020), Cap Screw; (C) 3/4" X 6-1/2", (Sub For R53020), Cap Screw; 3/4" X 6-1/2" (For 5 X 7 Frame), Cap Screw; 3/4"X6-1/2", Cap Screw; 19.050 X 165.100 mm (3/4" X 6-1/2"), Cap Screw; (D: For 5 X 7 Frame) 3/4" X 6-1/2", Cap Screw; 3/4" X 6-1/2", Cap Screw; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4" X 6-1/2" Hs, Sae 8, Cap Screw; 3/4" X 6-1/2", Hs Sae 8, Cap Screw; (A) 3/4" X 6-1/2", Cap Screw; (C: ( -Xxxxxx) 4650-0192; 4850-0152) 3/4" X 6-1/2" Hs 8 Sae, Cap Screw; (B: Wide) 3/4" X 6-1/2" (Hs, Sae 8), Cap Screw; (D: Wide) (F: Coarse Thread) 3/4" X 6-1/2" Hs, Sae 8, Cap Screw; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4" X 6-1/2" Hs, Sae 8, Cap Screw; 3/4" X 6-1/2" Hs 8 Sae	2

See all parts with full part numbers in Heavy Parts AI →

Over-Center Fold Plates And Wing Stops Drawn (Flexible 11' Main Frame)

John Deere : 680 - Plow, Chisel : Over-Center Fold Plates And Wing Stops Drawn (Flexible 11' Main Frame)

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	10
19***10	Cap Screw; (B) 7/8"X6" (Sub For R34828), Cap Screw; 7/8" X 6" 7/8" X 6", (Sub For R32225 Or R34828), Cap Screw; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer) 7/8" X 6", Cap Screw; 7/8" X 6", (Use With R32230, R52770, F1478r Or F1500r) (Sub For R34828), Cap Screw; 7/8" X 6", Cap Screw; 7/8" X 6", (Sub For R32225 Or R34828), Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) 7/8" X 6", Cap Screw; (A) 7/8" X 6", (Sub For R34828), Cap Screw; 7/8" X 6", (Sub For R34826), Cap Screw; 7/8" X 6" (Sub For R34828), Cap Screw; (Sub For R34828), Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) 7/8" X 6", Cap Screw; 7/8" X 6" 7/8" X 6", (Sub For A4387r Or R34828) (Use With F1478r, F1500r, F1590r, R21480, R31610 Or R31620), Cap Screw; 7/8" X 6", (19 And 23-Foot Vertical Fold), Cap Screw; 7/8" X 6", (With Truss Rods), Cap Screw, Cap Screw; 7/8"X6" (Sub For R34828), Cap Screw; (A) 7/8" X 6", Cap Screw; (B) 7/8" X 6" (Sub For R34828), Cap Screw; 7/8" X 6", (Sub For R34828)	5
19***74	Cap Screw; (D) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Sub For 19h3353), Cap Screw; (A) (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 11 Thru 27-Foot Machines), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 23 Thru 27-Foot Machines), Cap Screw; (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" Lh, Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; (A) (B) (C) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Use With 14h800), Cap Screw; 5/8" X 5-1/4", Cap Screw; 5/8"X5-1/4", Cap Screw; 5/8" X 5-1/4", Shear Bolt, Hs, Sae 8; Standard Spacing - 510 mm (20") Only, Cap Screw; 5/8" X 5-1/4", (Hs, Sae 8) (For Use With 5 Or 6 Levers), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8) (For 23' Thru 28'4" Machines)	10
19***07	Cap Screw; 3/4" X 6" (Hs, Sae 8) Wide Axle, (Sub For R53021), Cap Screw; (A) 3/4" X 6", Cap Screw; 3/4" X 6" (Hs, Sae 8), Cap Screw; (B) M19,05 X 152,4, Cap Screw; 0,75" X 6", Cap Screw; 3/4" X 6" For A-Frame Hitch Machines, Cap Screw; (D) 3/4" X 6", (Sub For R53021) (Also Order 14h1058), Cap Screw; (A) 3/4"X6", Cap Screw; 19.050 X 152.400 mm, Cap Screw; 3/4"X6" (Sae 8), Cap Screw; 3/4"X5-3/4" (Sub For 19h1988), Cap Screw; 3/4" X 6" (Sub For N330632) For A-Frame Hitch Machines, Cap Screw; 0,75" X 6,0", Cap Screw; (B) 3/4" X 6" (Hs, Sae 8), Cap Screw; 3/4" X 6" 3/4"X6" (Sae 8), Cap Screw; (C) 3/4" X 6", Cap Screw; 3/4"X6" (Sub For 19h2001), Cap Screw; (B) 0,75" X 6", Cap Screw; 3/4" X 6" Hs, Sae 8, Cap Screw; 3/4"X6-3/4", Cap Screw; (A) (B) 3/4" X 6", On Front Side Of Outer Standard Only, Cap Screw; 3/4"X6" (Sub For 19h3225), Cap Screw; 3/4" X 6" Hs Sae 8, Cap Screw; (B: Wide) 3/4" X 6" (Hs, Sae 8), Cap Screw; 3/4" X 6" (Hs, Sae 8) Use With Cast Weight Bracket, Cap Screw; 3/4" X 6" (Sae 8), Cap Screw; (C: Narrow) (D: Wide) (F: Coarse Thread) 3/4" X 6" Hs, Sae 8, Cap Screw; (A) (B) (C) (D) 3/4" X 6", On Front Side Of Outer Rear Standard Only, Cap Screw; 3/4"X6", Cap Screw; 3/4" X 6" Rh Front Gangs & Lh Rear Gangs, Cap Screw; (B) 3/4" X 6", On Front Side Of Outer Standard Only, Cap Screw; 3/4" X 6", Cap Screw; (A) (B) 3/4" X 6", Cap Screw; 3/4" X 6" Rh Double Disk Blade, Cap Screw; (A: (2) 13" Extensions) 3/4" X 6", Cap Screw; 3/4"X6" (Sub For 19h1988, 19h2266), Cap Screw; 3/4" X 6", Hs, Sae 8, Rear Bolt Is Pivot Bolt, Cap Screw; 3/4" X 6", Hs, Sae 8, Cap Screw; (C) 3/4" X 6", (Sub For R53021) (Also Order 14h1058)	1

See all parts with full part numbers in Heavy Parts AI →

Rigid Hitch

John Deere : 680 - Plow, Chisel : Rigid Hitch

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	20
19***98	Cap Screw; 3/4" X 1-3/4" (To Front Axle Support), Cap Screw; 3/8" X 1-3/4", Cap Screw; 3/4" X 1-3/4", Cap Screw; (A) 3/4"X1-3/4", Cap Screw; 3/4"X1-3/4", Cap Screw; 3/4" X 1-3/4" (Sub For R35192, This Application), Cap Screw; 3/4" X 1-3/4", (Use With Ar28050 Or Ar28817), Cap Screw; 3/4" X 1-3/4", Lh, Cap Screw; 19.050 X 44.450 mm (3/4" X 1-3/4"), Cap Screw; (A) 19,050 X 44,450 mm, Cap Screw; 3/4" X 1-3/4", (Sub For R35192, This Application), Cap Screw; 5/8"X1-3/4", Cap Screw; 3/4" X 1-3/4" (Side Frame To Front Axle Support)	16
19***24	Cap Screw; 5/8" X 2-1/4", Use When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" R.H. Side Only, Cap Screw; 5/8" X 2-1/4", Required To Connect Unit To Parallel Arms, Cap Screw; 5/8 X 21/2-In., Cap Screw, Cap Screw; 5/8" X 2-1/4", (Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Front Axle), Cap Screw; 5/8" X 2-1/4" (2940, 3030, 3040, 3130, 3140 (37*06-)) (2950, 2955, 3050, 3350), Cap Screw; 5/8" X 2-1/4", Use With N212983 When Hitch Is Lowered, Cap Screw; 5/8" X 2-1/4", Use With Extension, Cap Screw; 5/8" X 2-1/4", (Sub For 19h1734) This Application Only, Cap Screw; (D) 5/8" X 2-1/4", Cap Screw; (B) 5/8" X 2-1/4", Cap Screw; 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Use With 12h294), Cap Screw; (H: Also Use On 4050e And 4250e) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Rh Side Only, Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4", (Used With Wheel Spacers), Bolt, Cap Screw; (C) (G) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Used With Sheel Spacers), Cap Screw; (A: Note; 9550 ( -7000) 9550sh ( -70**00)) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" Wing Frame Only, Cap Screw; 5/8" X 2-1/4", Rear Position - 530, 630, 520, 50 Or 60 Tractors; Front Position - 730, 720, Or 70 Tractors., Cap Screw; 5/8" X 2-1/4", (Use When Hitch Is Lowered), Cap Screw; (C) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Planetary Final Drive), Cap Screw; 5/8" X 2-1/4" (To Front Axle Support), Cap Screw; 5/8" X 2-1/4" (Used With Wheel Spacers), Cap Screw; 5/8" X 2-1/4" (Support To Cylinder Block), Cap Screw; 5/8" X 2-1/4" (To Cylinder Block), . Bolt, Cap Screw; 15.875 X 57.150 mm	10
19***74	Cap Screw; (D) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Sub For 19h3353), Cap Screw; (A) (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 11 Thru 27-Foot Machines), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), (For 23 Thru 27-Foot Machines), Cap Screw; (B) 5/8" X 5-1/4", Cap Screw; 5/8" X 5-1/4" Lh, Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; (A) (B) (C) 5/8" X 5-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 5-1/4" (Use With 14h800), Cap Screw; 5/8" X 5-1/4", Cap Screw; 5/8"X5-1/4", Cap Screw; 5/8" X 5-1/4", Shear Bolt, Hs, Sae 8; Standard Spacing - 510 mm (20") Only, Cap Screw; 5/8" X 5-1/4", (Hs, Sae 8) (For Use With 5 Or 6 Levers), Cap Screw; 5/8" X 5-1/4" (Hs, Sae 8) (For 23' Thru 28'4" Machines)	10

See all parts with full part numbers in Heavy Parts AI →

Rigid Stabilizer Wheel Support (Xxxx - )

John Deere : 680 - Plow, Chisel : Rigid Stabilizer Wheel Support (Xxxx - )

03***99	Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)	4
11***30	Cotter Pin; (A: 24r20) (B: 31/32r15) 5 X 40 mm, Cotter Pin; (A: Main Frame) (B: Wing Frame) 5 X 40 mm, Cotter Pin; 0.197" X 1.575", Cotter Pin; (A: 5303 (-00*13), 5403 (-0075)) 5 X 40 mm, Cotter Pin; (Sub For Pt19056), Cotter Pin; 5x40mm (Sub For L36469), Cotter Pin; (A: 9550 (6901-) 9550sh (6901-)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (0.197" X 1.575"), Cotter Pin; 5x40mm, Cotter Pin; (A) 5 X 40 mm, Cotter Pin; 5 X 40 mm, (Sub 11m7073), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 5 X 40 mm, (Use With N60865), Cotter Pin; 5 X 40 mm (For Ah219841), Cotter Pin; 5 X 55 mm (Sub For 11m1405), Cotter Pin; (Sub For 11h218), Cotter Pin; 5 X 40 mm (912), Cotter Pin; (A) 5x40mm, Cotter Pin; (B) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, Cotter Pin; 5 X 40mm, Cotter Pin; (B: Part Of Ar109180 Adjustable Front Axle) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For Pt19056), Cotter Pin; 5 X 40 mm, (Sub For 11h218), Cotter Pin; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m1405), Cotter Pin, Cotter Pin; M5 X 40 Zn, Cotter Pin; 5/32"X1-1/2", Cotter Pin; (B: 12.5 Foot) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m7073, This Application), Cotter Pin; 5 X 45 mm, Cotter Pin; (A: Syncshuttle Transmission - 5420: Sn 4460-, 5520: Sn 45*01-) 5 X 40 mm, Cotter Pin; (A) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, (Sub For Mg87398), Cotter Pin; (B) 5x40mm, Cotter Pin; 5 X 40 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5x45mm	1
11***85	Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480"	1
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	4

See all parts with full part numbers in Heavy Parts AI →

Rigid Stabilizer Wheel Support (Left-Hand Illustrated) ( - Xxxx)

John Deere : 680 - Plow, Chisel : Rigid Stabilizer Wheel Support (Left-Hand Illustrated) ( - Xxxx)

03***99	Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)	4
11***30	Cotter Pin; (A: 24r20) (B: 31/32r15) 5 X 40 mm, Cotter Pin; (A: Main Frame) (B: Wing Frame) 5 X 40 mm, Cotter Pin; 0.197" X 1.575", Cotter Pin; (A: 5303 (-00*13), 5403 (-0075)) 5 X 40 mm, Cotter Pin; (Sub For Pt19056), Cotter Pin; 5x40mm (Sub For L36469), Cotter Pin; (A: 9550 (6901-) 9550sh (6901-)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (0.197" X 1.575"), Cotter Pin; 5x40mm, Cotter Pin; (A) 5 X 40 mm, Cotter Pin; 5 X 40 mm, (Sub 11m7073), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 5 X 40 mm, (Use With N60865), Cotter Pin; 5 X 40 mm (For Ah219841), Cotter Pin; 5 X 55 mm (Sub For 11m1405), Cotter Pin; (Sub For 11h218), Cotter Pin; 5 X 40 mm (912), Cotter Pin; (A) 5x40mm, Cotter Pin; (B) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, Cotter Pin; 5 X 40mm, Cotter Pin; (B: Part Of Ar109180 Adjustable Front Axle) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For Pt19056), Cotter Pin; 5 X 40 mm, (Sub For 11h218), Cotter Pin; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m1405), Cotter Pin, Cotter Pin; M5 X 40 Zn, Cotter Pin; 5/32"X1-1/2", Cotter Pin; (B: 12.5 Foot) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m7073, This Application), Cotter Pin; 5 X 45 mm, Cotter Pin; (A: Syncshuttle Transmission - 5420: Sn 4460-, 5520: Sn 45*01-) 5 X 40 mm, Cotter Pin; (A) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, (Sub For Mg87398), Cotter Pin; (B) 5x40mm, Cotter Pin; 5 X 40 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5x45mm	1
11***85	Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480"	1
14***58	Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551)	4

See all parts with full part numbers in Heavy Parts AI →

Safety Chain

John Deere : 680 - Plow, Chisel : Safety Chain

08***27	Bolt; 3/4" X 9", Used With Tow-Between Cart, Bolt; (B: 20, 000 Lb.) 3/4" X 9" (Hs, Sae 8) Level Lift Hitch, Bolt; 3/4" X 9" (Use With N240072 And K40016), Bolt; (A: Used With Tow-Between Cart) 3/4" X 9"	1
19***07	Cap Screw; (A: Extension Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (With Drawbar Offset Down), Cap Screw; (A: Clutch Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; (C) 3/4" X 2-3/4", Cap Screw; Ar 3/4"X2-3/4", Cap Screw; (A) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Code 1403), Cap Screw; (B: 100 mm Axle) (C: 92 mm Axle With R54160) 3/4" X 2-3/4", Cap Screw; 3/4"X3", Cap Screw; 3/4" X 2-3/4", (Center), Cap Screw; (B) (C) 3/4" X 2-3/4", Cap Screw; (A) (B) 3/4" X 2-3/4", Rear Top, Cap Screw; (B) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Or), Cap Screw; 3/4" X 2-3/4", Cap Screw; 3/8"X2-3/4", Cap Screw; Ar, 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4" Rear Top, (17'-11" Through 26'-5"), Cap Screw; 3/4" X 2-3/4", (Rc, St And Ru), Cap Screw; (B: Torque Divider To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: Clutch Housing To Cylinder Block) 3/4" X 2-3/4", Cap Screw; (D) (E) 3/4" X 2-3/4", Cap Screw; 3/4"X2-3/4", Cap Screw; Ar,3/4"X2-3/4", Cap Screw; (A: Extension Housing To Torque Divider) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", Rear Top, Cap Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: 20.8-38 Tire 8 Pr Not Used In U.S. And Canada) 3/4" X 2-3/4" (24.5-32 Or 23.1-34) Tire, Cap Screw; 3/4" X 2-3/4", (Row-Crop And Standard), Cap Screw; 3/4" X 2-3/4", For 850, Cap Screw; (A: 10, 000 Lb.) 3/4" X 2-3/4" Rigid Hitch, Cap Screw; (C) (D) (E) 3/4" X 2-3/4"	1
19***28	Cap Screw; 3/4" X 3", Cap Screw; 3/4" X 3", (Hs, Sae 8), Cap Screw; 3/4" X 3" (3/4" Bolt Holes), Cap Screw; 3/4" X 3", (Use With Re240723), Cap Screw; (X) 3/4" X 3", Cap Screw; 3/4" X 3" Hs 8 Sae, Cap Screw; (B: (Xxxxxx- ) Serial No. 8450-00*63; 8650-0078) (E: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4"X3", Cap Screw; 3/4" X 3", Caution, Cap Screw; 3/4" X 3" (5 X 7 Frame) (Safety Trip), Cap Screw; 3/4" X 3" On Chain Piler Outer Lugs, Cap Screw; 3/4" X 3", (Hs Sae 8), Cap Screw; 3/4" X 3" Hs=10.9, Sae 8, Cap Screw; 19.050 X 76.200 mm, Cap Screw; 3/4" X 3" (Safety Trip), Cap Screw; 3/4" X 3", Hs, Sae 8, Cap Screw; (B: 20, 000 Lb.) 3/4" X 3" (Hs, Sae 8) Rigid Hitch, Cap Screw; (A: ( -Xxxxxx) 4050-0035; 4250-0190) 3/4" X 3" Hs, Sae 8, Cap Screw; (B: (Xxxxxx- ) 4650-0164; 4850-0000) (C: ( -Xxxxxx) 4650-0192; 4850-0152) 3/4" X 3" Hs 8 Sae, Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-0026; 8650-0031) 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4" X 3", (2-Joint Hookup), Cap Screw; 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4" X 3", Hs Sae 8, Cap Screw; (C: 2-Joint Hookup) 3/4" X 3", Cap Screw; 3/4" X 3" Rigid Hitch, Cap Screw; 3/4" X 3", (Sub For Ar35807), Cap Screw; 3/4" X 3" Hs=8 Sae, Cap Screw; (A) 3/4" X 3", Cap Screw; 3/4" X 3" (Hs, Sae 8) (Use With Shims), Cap Screw; 3/4" X 3" Hs Sae 8, Cap Screw; 3/4" X 3" (Hs, Sae 8), Cap Screw; (B: (Xxxxxx- ) 4250-0085; 4450-0170) (E: ( -Xxxxxx) 4250-0190; 4450-02*70) 3/4" X 3" Hs, Sae 8, Cap Screw; 3/4" X 3", Hs Sae 8, Plated	1
24***03	Washer; 25/32" X 2" X 0.180" (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", (12'-2' Through 15'-0") (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", Washer; 25/32" X 2" X 0.180", (13'-10" Through 19'-10") (10,000 Lb Chain), Washer; 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180" 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180", (For 10,000 Lb Chain), Washer; 25/32" X 2" X 0.180" Tension, Washer; 25/32" X 2" X 0.180", (12 Used L.H.) (12 Used R.H.)	1

See all parts with full part numbers in Heavy Parts AI →

Shovels And Plow Bolt Shipping Bundles

John Deere : 680 - Plow, Chisel : Shovels And Plow Bolt Shipping Bundles

AN***96	Shovel; (D: Hard Point Shovels) 51 mm X 305 mm (2" X 12"), Shovel; 51 X 305 mm (2" X 12") Hard Point, Shovel; (E: Hard Point Shovels) 51 mm X 305 mm (2" X 12"), Shovel; (E: Hard Point Shovels) 51mm X 305 mm (2" X 12")	1
AN***72	Screw And Washer Kit; (E: Plow Bolt Shipping Bundles) (1/2" X 2") (50) Sweep Bolts, Nuts And Washers, Screw And Washer Kit; (F: Plow Bolt Shipping Bundles) (50)Sweep Bolts, Nuts And Washers (1/2"X 2"), Screw And Washer Kit; (F: Plow Bolt Shipping Bundles) (50) Sweep Bolts, Nuts And Washers(1/2" X 2")	1
AN***73	Screw And Washer Kit; (F: Plow Bolt Shipping Bundles) (50)Sweep Bolts, Nuts And Washers(1/2" X 2-1/4 "), Screw And Washer Kit; (F: Plow Bolt Shipping Bundles) (50)Sweep Bolts, Nuts And Washers (1/2" X2-1/4 "), Screw And Washer Kit; (E: Plow Bolt Shipping Bundles) (1/2" X 2-1/4") (50) Sweep Bolts, Nuts And Washers	1
AN***74	Screw And Washer Kit; (E: Plow Bolt Shipping Bundles) (1/2" X 2-1/2") (50) Sweep Bolts, Nuts And Washers, Screw And Washer Kit; (F: Plow Bolt Shipping Bundles) (50)Sweep Bolts, Nuts And Washers(1/2" X 2-1/2 ")	1

See all parts with full part numbers in Heavy Parts AI →

Single Point Depth Control

John Deere : 680 - Plow, Chisel : Single Point Depth Control

08***16	Bolt; 7/8" X 10" Hs Sae 8, Bolt; 7/8" X 10", Bolt; 7/8" X 10" (Hs, Sae 8)	1
1***E	Spring	1
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	6

See all parts with full part numbers in Heavy Parts AI →

Single Point Depth Control Hydraulics

John Deere : 680 - Plow, Chisel : Single Point Depth Control Hydraulics

03***06	Bolt; (A) 5/16" X 3", Bolt; 7.925 X 76.200 mm (5/16" X 3"), Bolt; 5/16" X 3", Bolt; 5/16" X 3" (Use With 14h818 And T16464)	2
AA***73	Seal Kit, Seal Kit; Valve Repair	1
AE***11	Hydraulic Hose; Single Point Depth Control, Hydraulic Hose; 3/4" X 914 mm (36") X 3/4", From Valve Port "B" To Hitch Tube Front Port, Hydraulic Hose; 3/4" X 914 mm X 3/4", Hydraulic Hose; 3/4" X 914 mm (36") X 3/4", Hydraulic Hose; 3/4" X 914 mm X 3/4" Single Point Depth Control, Hydraulic Hose; For Bucket Dump Angle Improvement, Hydraulic Hose; Double Acting Valve Sections, Hydraulic Hose; (Double Acting Cylinders), Hydraulic Hose; 3/4" X 914 mm X 3/4"	1
AH***93	Elbow Fitting; 90° (7/8" Male O-Ring X 3/4" Male Jic), Elbow Fitting; 90° (Also Order R26906 ) (Sub For Mg131052), Elbow Fitting; (Sub For Mg131052, Also Order R26906), Elbow Fitting; Adjustable, 90°, Elbow Fitting; 90° (7/8 Male O-Ring To 3/4" Male Jic), Elbow Fitting; 90° 7/8" Male O-Ring X 3/4" Jic Male, Elbow Fitting; 90 Degree, Elbow Fitting; 90 Deg. (Sub For Mg131052, Also Order R26906), Elbow Fitting; 90° 3/4" Jic Male X 7/8" O-Ring, Elbow Fitting; 90 Degree Elbow, Elbow Fitting; (3/4" Male Jic X 7/8" Male O-Ring), Elbow Fitting; 90°, Elbow Fitting, Elbow Fitting; 90° Elbow, Elbow Fitting; 90° Straight (3/4" X 7/8" Thrd Size), Elbow Fitting; 90° 7/8" O-Ring X 3/4" Jic Male, Elbow Fitting; 3/4" X 7/8", Elbow Fitting; 90° 7/8" Male O-Ring X 3/4" Male Jic, Elbow Fitting; 90°, Adjustable, Elbow Fitting; 90°, (Sub For At32332, This Application)	1

See all parts with full part numbers in Heavy Parts AI →

Slow Moving Vehicle Emblem And Post

John Deere : 680 - Plow, Chisel : Slow Moving Vehicle Emblem And Post

14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2
19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	2
AN***99	Hose Clamp; Tube, Hose Clamp; (A), Hose Clamp; (B), Hose Clamp; 5-1/2" Maximum, Hose Clamp; (12'-2" Through 15'-0"), Hose Clamp; (A) (B), Hose Clamp, Hose Clamp; 4-5/8" X 5-1/2", Hose Clamp; 11' And 17' Base, Hose Clamp; Large Clamp, Hose Clamp; (11' Rigid), Hose Clamp; 4" X 4', Hose Clamp; 4" X 4"	1
JD***01	Sign; Smv Emblem (Black Overlay), Sign; "Smv Decal", (Sub Jd5400), Sign; (Sub Jd5400) "Smv Decal" On Deflector., Sign; (Sub Jd5400) (No Longer Available), Sign; Smv (Black Overlay), Sign; Black Overlay, Sign; Slow Moving Vehicle Sign, Sign; Slow Moving Vehicle, Sign, Sign; Rear (For Z47392), Sign; Smv, Sign; "Emblem, Smv" - 0n Rear, Sign; Smv (Sub Ty24479), Sign; Slow Moving Vehicle Sign (Also Included In Decal Set), Sign; Slow Moving Vehicle, (Kit Ah101946), Sign; Slow Moving Vehicle, (Kit Ah101947)	1

See all parts with full part numbers in Heavy Parts AI →

Stabilizer Cylinder Anchor And Hose

John Deere : 680 - Plow, Chisel : Stabilizer Cylinder Anchor And Hose

24***48	Washer; (A) 1-1/32" X 1-1/2" X 0.120", Washer; 1-1/32" X 1-1/2" X 0.120" (A), Washer; 1-1/32" X 1-1/2" X 0.120", Washer; 26.187 X 38.100 X 3.048 mm, Washer; 1-1/32" X 1-1/2" X 0.120" (D), Washer, Washer; 1-1/32" X 1-1/2" X 0.120" (Sub For Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", (700), Washer; (A: For 9650 ( -70*00) & 9750 ( -7000)) 1-1/32" X 1-1/2" X 0.120", Washer; (Sub For (2) Mg272487), Washer; (Use With M150249 And M79152), Washer; 1-1/32" X 1-1/2" X 0.120" (Sub For (2) Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120", 28 Ft, Washer; (A: Note; 9550 (7001- ) 9550sh (7001- )) 1-1/32" X 1-1/2" X 0.120", Washer; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1-1/32" X 1-1/2" X 0.120", Washer; (A: Note; 9550 ( -7000) 9550sh ( -70*00)) 1-1/32" X 1-1/2" X 0.120", Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For Et10714), Washer; 1-1/32" X 1-1/2" X 0.120", (750), Washer; 1-1/32" X 1-1/2" X 0.120", (Sub For (2) Mg272487), Washer; 1-1/32" X 1-1/2" X 0.120" (With 1" Pin), Washer; (A) 1-1/32" X 1-1/2" X 0.120" (K1) 35mm X 2.4mm (1.4" O.D. X .093" Thick) (Sub For (2) Mg272487)	2
28***60	Bushing; (D) 1" X 0.625", Bushing; 1.049" X 1.315" X 5/8", Bushing; 1.049" X 1.315" X 5/8", (Hoe), Bushing; 1.049" X 1.315" X 5/8" (Sub For N121346), Bushing; (D), Bushing	2
34***55	Spring Pin; 3/8" X 2", 36' And 42', (Use With N185294), Spring Pin; 9.525 X 50.800 mm (3/8" X 2"), Spring Pin; 3/8" X 2" (W/ Y104e, 34h305) (Sub For E50102, 19h2128), Spring Pin; 3/8" X 2", (Sub 34h386), Spring Pin; 3/8" X 2", (Use With N185294), Spring Pin; 3/8" X 2" (W/ 34h305, Y104e) (Sub For 19h2128, E50102), Spring Pin; 3/8" X 2", 30', (Use With N185294), Spring Pin; 3/8" X 2", (For Tube Guard), Spring Pin; 3/8" X 2", (Sub For 34h353), Spring Pin; 3/8" X 2", Spring Pin; 3/8" X 2" Lgth=50.80mm (2.000"), Spring Pin, Spring Pin; 3/8" X 2" Lgth= 50.88mm (2.000"), Spring Pin; 3/8" X 2" Lgth= 50.80mm (2.000"), Spring Pin; 3/8"X2", Spring Pin; (A) 3/8" X 2", Spring Pin; 3/8" X 2" (Used With 1-1/4" Pin), Spring Pin; 3/8" X 2" (Sub For E63018, This Application), Spring Pin; 3/8" X 2", (Use With N260835)	2
AN***51	Hydraulic Cylinder; (Sub For Pt1210), Hydraulic Cylinder; (Sub For An163270), Hydraulic Cylinder; (Sub For An182674), Hydraulic Cylinder; 3 X 8, Hydraulic Cylinder; 3 X 8, (Sub For An163270), Hydraulic Cylinder; 3 X 8” (For 11 Thru 17-Foot Machines), (Sub For An182674), Hydraulic Cylinder; (Sub Ae51022), Hydraulic Cylinder, Hydraulic Cylinder; 3" X 8", (Sub An231450)	1

See all parts with full part numbers in Heavy Parts AI →

Spring Trip Standard

John Deere : 680 - Plow, Chisel : Spring Trip Standard

10***36	Bolt; 1/2" X 2-1/4", (Hs Sae 8), Bolt; (B) (C) 0,5" X 2,25", Bolt, Bolt; 1/2" X 2-1/4", Hs Sae8, Bolt; 1/2" X 2-1/4" (Used With Sweeps), Bolt; (B: For Msl) 1/2" X 2-1/4", Bolt; (B) (C) M12,7 X 57,15, Bolt; (A) (B) 1/2" X 2-1/4", Bolt; 1/2" X 2-1/4", Hs Sae 8, (Sub For 10h1076), Bolt; 1/2" X 2-1/4", 2150mm, Bolt; 0,5" X 2,25", Bolt; 1/2" X 2-1/4" (Hs, Sae 8), Bolt; 1/2" X 2-1/4" (Hs, Sae 8) (Used With Sweeps), Bolt; 1/2" X 2-1/4", Hs Sae 8, Bolt; 1/2" X 2-1/4", Bolt; 1/2"X2-1/4", Bolt; (B) 0,5" X 2,25", Bolt; 12.700 X 57.150 mm, Bolt; (B: For Msl) (C: For Nsl) 1/2" X 2-1/4", Bolt; (B) M12,7 X 57,15, Bolt; 1/2" X 2-1/4" (For Use With Sweeps)	2
10***37	Bolt; 1/2"X2-1/2", Bolt; 1/2" X 2-1/2", N0. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", Hs Sae8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8), Bolt; (B) 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Hs, Sae 8) (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) Banding Boot, Bolt; 1/2" X 2-1/2", 3 Plow Bolt, Bolt; 1/2" X 2-1/2", (Hs Sae 8), Bolt; 1/2" X 2-1/2", Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (No. 3 Plow Bolt), Bolt; 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2", No. 3, Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Used With Chisels), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (Used With Chisels), Bolt; 1/2" X 2-1/2", (Hs, Sae 8), Bolt; 1/2" X 2-1/2", Hs Sae 8, Bolt; 1/2" X 2-1/2" No. 3 Plow Bolt (Hs, Sae 8), Bolt; 1/2" X 2-1/2", No. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", No.3 Plow Bolt, Bolt; 1/2" X 2-1/2" (For Use With Chisels), Bolt; 1/2" X 2-1/2", N0.3 Plow Bolt, Bolt; 12.700 X 63.500 mm (1/2" X 2-1/2")	2
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	1

See all parts with full part numbers in Heavy Parts AI →

Spring Trip Standard (Tru-Depth™)

John Deere : 680 - Plow, Chisel : Spring Trip Standard (Tru-Depth™)

03***46	Bolt; (C) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4" L.H., Bolt; 1/2" X 1-1/4" (Flexible), Bolt; 1/2" X 1-1/4", (For 1985 Machines And Up), Bolt; 1/2" X 1-1/4" (A), Bolt; 1/2" X 1-1/4" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Bolt; (A) 1/2" X 1-1/4", Bolt; (Use With E64519), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4") (1253a), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4" Grass Seed Special, Bolt; 1/2" X 1-1/4", Bolt; 1/2"X31,7, Bolt, Bolt; 1/2" X 1-1/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, 224-16 Used), Bolt; 1/2" X 1-1/4", (United Kingdom Only), Bolt; 1/2"X1-1/2", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (327, 336, 337, 346 And 347 Balers), Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/4", Gr. 8	2
10***36	Bolt; 1/2" X 2-1/4", (Hs Sae 8), Bolt; (B) (C) 0,5" X 2,25", Bolt, Bolt; 1/2" X 2-1/4", Hs Sae8, Bolt; 1/2" X 2-1/4" (Used With Sweeps), Bolt; (B: For Msl) 1/2" X 2-1/4", Bolt; (B) (C) M12,7 X 57,15, Bolt; (A) (B) 1/2" X 2-1/4", Bolt; 1/2" X 2-1/4", Hs Sae 8, (Sub For 10h1076), Bolt; 1/2" X 2-1/4", 2150mm, Bolt; 0,5" X 2,25", Bolt; 1/2" X 2-1/4" (Hs, Sae 8), Bolt; 1/2" X 2-1/4" (Hs, Sae 8) (Used With Sweeps), Bolt; 1/2" X 2-1/4", Hs Sae 8, Bolt; 1/2" X 2-1/4", Bolt; 1/2"X2-1/4", Bolt; (B) 0,5" X 2,25", Bolt; 12.700 X 57.150 mm, Bolt; (B: For Msl) (C: For Nsl) 1/2" X 2-1/4", Bolt; (B) M12,7 X 57,15, Bolt; 1/2" X 2-1/4" (For Use With Sweeps)	2
10***37	Bolt; 1/2"X2-1/2", Bolt; 1/2" X 2-1/2", N0. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", Hs Sae8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8), Bolt; (B) 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Hs, Sae 8) (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) Banding Boot, Bolt; 1/2" X 2-1/2", 3 Plow Bolt, Bolt; 1/2" X 2-1/2", (Hs Sae 8), Bolt; 1/2" X 2-1/2", Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (No. 3 Plow Bolt), Bolt; 1/2" X 2-1/2", Bolt; 1/2" X 2-1/2", (Lower) (Use With N130183), Bolt; 1/2" X 2-1/2", No. 3, Hs, Sae 8, Bolt; 1/2" X 2-1/2" (Used With Chisels), Bolt; 1/2" X 2-1/2" (Hs, Sae 8) (Used With Chisels), Bolt; 1/2" X 2-1/2", (Hs, Sae 8), Bolt; 1/2" X 2-1/2", Hs Sae 8, Bolt; 1/2" X 2-1/2" No. 3 Plow Bolt (Hs, Sae 8), Bolt; 1/2" X 2-1/2", No. 3 Plow Bolt, Bolt; 1/2" X 2-1/2", No.3 Plow Bolt, Bolt; 1/2" X 2-1/2" (For Use With Chisels), Bolt; 1/2" X 2-1/2", N0.3 Plow Bolt, Bolt; 12.700 X 63.500 mm (1/2" X 2-1/2")	2
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	2

See all parts with full part numbers in Heavy Parts AI →

Three-Bar Tine Harrow Adjustable Attachment

John Deere : 680 - Plow, Chisel : Three-Bar Tine Harrow Adjustable Attachment

19***32	Screw; 3/8" X 1-1/4", (Single-Range) (100 Per Cent Beater Speed), Screw; 3/8" X 1-1/4" Rh, Screw; 3/8" X 1", Screw; 3/8" X 1-1/4" (Use With Ar54556), Screw; 3/8" X 1-1/4", (Na-D), Screw; 3/8" X 1-1/4", (Lower Holes), Screw; 3/8" X 1-1/4" (2 Used, Belt Drive; 4 Used, Hydrostatic Drive), Screw; 3/8" X 1 1/4", Screw; 3/8" X 1-1/4", (Use With R52288 Or R81927), Screw; 3/8" X 1-1/4", Use With Furrower, Screw; 3/18" X 1-1/4", Screw; 3/8x1-1/4", Screw; (A) (B) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (Per Plate) (Use With H119094), Screw; 3/8" X 1-1/4", (22 Used, Variable Drive; 26 Used, Long), Screw; 3/8" X 1-1/4", (Rs, Ut), Screw; 3/8" X 11/4", Screw; 3/8" X 1-1/4" (Use With 12h304), Screw; 3/8" X 1-1/4", 3/8" X 1 1/4", Screw; 3/8" X 1-1/4", (For Kohler Engine), Screw; 3/8" X 1-1/4", For 14 Harrow, Screw; 3/8" X 1-1/4", (Sidehill), Screw; 3/8" X 1-1/4" (2 Used, Belt Drive; 1 Used, Hydrostatic Drive), Screw; 3/8" X 3-1/4" (Sub For 19h2458), Screw; X 3/8" X 1" (Sub For 03h1519), Screw, Screw; 3/8" X 1-1/4", Use With Furrower Only, Screw; (A: W/O Sgb) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (Per Wheel), Screw; (A) 3/8" X 1-1/4", Screw; 3/8"X1-1/4", Screw; 3/8"X1-1/4" (Sub For 19h988), Screw; 3/8"X1"-1/4" (Sub For 19h988), Screw; 3/8" X 1-1/4" (2 Used-Belt Drive; 1 Used-Hydrostatic Drive), Screw; 3/8" X 1-1/4", (Use With Ar54556), Screw; 3/8" X 1-1/4", (Sub For F2273r), Screw; (A: For Drill With Odd Number Of Rows) 3/8" X 1-1/4" (Tru-Vee), Screw; 3/8" X 1-1/4", For Mounting Compressor Drive Pulley, Screw; 3/8" X 1-1/4", (Variable Drive), Screw; 3/8"X1-1/4, Screw; 3/8" X 1-1/4", Dual, Screw; 3/8" X 1-1/4", For 15 Harrow, Screw; 3/8"X1"-1/4", Screw; (A) 3/8"X1-1/4", Screw; 3/8" X 1-1/4", (Use With N157426), Screw; 3/8" X 1-1/4" (Rh), Screw; 3/8" X 1-1/4" 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (R.H. Footrest To Clutch Housing), Screw; 3/8" X 1-1/4", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Screw; 3/8" X 1-1/4", (Per Plate), Screw; 3/8"X11/4", Screw; 3/8" X 1-1/4", (4 Used Gasoline And Diesel) (2 Used Lp-Gas), Screw; 3/8" X 1-1/4" (Extension), Screw; 3/8" X 1-1/4", (Front), Screw; 3/8" X 1-1/4" (Use With 14h812 And 24h1305), Screw; 3/8" X 1-1/4" 3/8" X 1 1/4", Screw; 3/8" X 1-1/4" (Sub For 19h1936), Screw; 3/8" X 1-1/4", Ord W/ (2) 12h304, Screw; (C) (D) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" (Use With Re502196), Screw; 3/8" X 1-1/4", (Sub For 19h2461), Screw; 3/8" X 1-1/4" (Use With 12h309 And 14h812), Screw; 3/8" X 1-1/4" 3/8"X1 1/4", Screw; (A) (C) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" (100 Per Cent Beater Speed) (Single-Range), Screw; (Or Ord 19m7786 (M10 X 30)), Screw; 3/8" X 1-1/4", Per Plate, (Use With H119096), Screw; 3/8"X1-1/4" (For L31065), Screw; 3/8" X 1-1/4" (3020e, 3020l), Screw; 3/8" X 1-1/4", (Use With Ar45917 Or R66684 On 3020&) (3020, 3020&), Screw; 3/8" X 1-1/4", (Dual), Screw; (A: Less Power Take-Off) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", Used With Furrowers, Screw; (A: (-Xxxxxx) 7710-0027; 7810-0092) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (Diesel), Screw; 3/8" X 1-1/4", (For Odd Row) (Tru-Vee), Screw; 3/8" X 1-1/4", For 15'3" Harrow, Screw; 3/8" X 1-1/4", (Syncro-Range), Screw; 3/8" X 1-1/4", (Modified 5200 And 5400), Screw; 3/8" X 1-1/4", (Use With 12h304 And 14h1076), Screw; 3/8"X3-1/4", Screw; 3/8"X1", Screw; 3/8" X 1-1/4" (Sub 19h3239), Screw; 3/8"X1-1/4" (For L32670), Screw; 9.525 X 31.750 mm, Screw; 3/8" X 1-1/4" (Use With N10215), Screw; 9.525 X 31.750 mm (3/8" X 1-1/4"), Screw; 3/8" X 1-1/4" (Per Plate), (Use With H119096), Screw; (B) 3/8" X 1-1/4", Screw; 3/8"X1-1/4" (Sub For L32504), Screw; 3/8" X 1-1/4", Right Rear Side Hole, Screw; (B) 3/8"X1-1/4", Screw; 3/8" X 1-1/4" 9 Standard, Screw; 3/8" X 1-1/4" (Use With 12h304), (Diesel), Screw; 3/8" X 1-1/4", (With Engine Coolant Heater), Screw; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Screw; 3/8" X 1-1/4", (Lower), Screw; 3/8" X 1-1/4" (675), Screw; 3/8" X 1-1/4", R.H. (Footrest To Clutch Housing), Screw; 3/8" X 1-1/2", Screw; X 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (16 Used, 6'; 24 Used, 8'), Screw; (B) 3/8" X 1-1/4", Control Support Side, Screw; 3/8" X 1-1/4" (Per Plate) (Use With H119095), Screw; 3/8" X 1-1/4" (Use With 14h812), Rear, Screw; 3/8" X 1-1/4", (Sub 19h3239), Screw; 3/8" X 1-1/4", (Power Front Wheel Drive), Screw; 3/8", Screw; (Code 1709), Screw; 3/8" X 1-1/4", (Use With Power Front Wheel Drive), Screw; Grid 1f15, Screw; 3/8" X 1-1/4" (Less Differential Lock), Screw; 3/8" X 1-1/4" (Use With 14h812), Screw; 3/8" X 1-1/4" (B), Screw; 3/8" X 1-1/4", (47-Foot Boom), Screw; 3/8" X 1-1/4" (With Extension), Screw; 3/8"X1-1/4" (Sub For 19h1731), Screw; 3/8" X 1-1/4", (Sub For R2273r), Cap Screw; 3/8" X 1-1/4", Screw; (A: Used With Warning Lamp) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" Hs, Sae 8, 3/8" X 1", Screw; (A: Sound-Gard Body) 3/8" X 1-1/4", Screw; (B: W/O Sound-Gard Body) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4" (Belt Drive), Screw; 3/8" X 1-1/4" (Hs, Sae 8), Screw; 3/8" X 1-1/4", Use With Furrower; For 4w, 6n, 6w, Screw; 3/8" X 1-1/4", Or Ord 19m7786 (M10 X 30), Screw; 3/8" X 1-1/4" (Use With 19h1732), Screw; 3/8" X 1-1/4" (Rear), Screw; 3/8" X 1-1/4" (3020, 3020&), Screw; 3/8" X 1-1/4", (Per Plate) (Use With H119095), Screw; 3/8" X 1-1/4" Sgb, Screw; 3/8" X 1-1/4" (Use With 14h812), (Extension), Screw; 3/8" X 1-1/4", Use With Furrowers Only, Screw; (C) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", For 10' And 12' Harrows, Screw; 3/8" X 1-1/4", (Sub For Ar45917) (3020&), Screw; 3/8" X 1-1/4", Runner Opener Only, Screw; 3/8"1-1/4", Screw; 3/8" X 1-1/4", (5200), Screw; 3/8" X 1-1/4", Screw; (B) 3/8"X1-1/4" (Sub For 19h988), Screw; 3/8" X 1-1/4" (Use With Ah227021), Screw; (C: 5303 (-00*07), 5403 (-00*42).) 3/8" X 1-1/4", Screw; 3/8" X 1-1/4", (3.1 M (10-Ft.), 3.7 M (12-Ft.) And 4.3 M (14-Ft.) Platforms), Screw; 3/8" X 1-1/4", To Transmission Case, Screw; 3/8" X 1-1/4", (700), Screw; 3/8" X 1-1/4", (Use With Re502196), Bolt, Screw; 3/8"X1/4", Screw; 9.525 X 31.750 mm (3/8" X 1-1/4") (854a), Screw; 3/8" X 1-1/4", (2 Used, Variable Drive; 4 Used, Long), Screw; 3/8" X 1-1/4", (Use With 14h1076 And 12h304), Screw; X 3/8" X 1-1/4", Screw; (A) (Use With Ar82453), Screw; 3/8" X 1-1/4" 3/8 Unc-2a X 1 1/4 A17d Zn, Screw; 3/8" X 1-1/4", (3014), Screw; 3/8" X 1-1/4", (From Exhaust Manifold), Screw; 3/8" X 1-1/4", (3006), Screw; 3/8" X 1-1/4", Used With Furrower On 8-Row And 12-Row	2
19***76	Bolt; 3/8" X 1" (A), (30"), Bolt; 3/8" X 1", Up, Bolt; 3/8" X 1" (Hn003), Bolt; (Hs, Sae 8), Bolt; 3/8" X 1" (38"), Bolt; 3/8" X 1" (Sae 8), Bolt; 3/8" X 1", (Sub (40) 19h3239), Bolt; 3/8"X1" (Sub For 19h218), Bolt; Use With E52386, Bolt; 3/8" X 1" (8.1l), Bolt; 3/8" X 1" 3/8", Bolt; 3/8" X 1", (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; (A) 3/8" X 1", (Use With Ae49783 Or Ae50069), Bolt; 3/8" X 1" (A), Bolt; 3/8" X 1" Sae 8; Up, Bolt; 3/8" X 1" (Hs, Head Marked 10.9), Bolt; 3/8" X 1" Sae 8, Bolt; 3/8" X 1" 'A', Bolt; 3/8" X 1" (Sub For 19h1731), Bolt; 3/8" X 1", (2502), Bolt; 3/8" X 1", (Code 3509), Bolt; 3/8" X 1" (Hs, Sae 8) 23' And 29' Base, Bolt; 3/8" X 1" Hs, Sae 8, Bolt; 3/8" X 1", (A/C Adapted To Pressurized Cab), Bolt; 3/8" X 1" (United Kingdom Only), Bolt; 3/8" X 1", (Sub For R54500), Bolt; 3/8" X 1" (Use With 12h304), Bolt; 3/8" X 1", (Sae 8) Up, Bolt; 3/8" X 1" (8 Used, Long Tongue) (6 Used, Short Tongue), Bolt; 3/8" X 1" Pump Mounting, Bolt; 3/8"X1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (32 Used, Without Filler Plates; 64 Used, With Filler Plates) (Sub 19h3239), Bolt; 3/8" X 1" (Hs, Sae 8), Bolt; 3/8" X 1" (Hs, Sae 8) (Sub For Mg88206), Bolt; 3/8" X 1" (Use With R86007) (Front), Bolt; (A) (B) 3/8" X 1", (Sub For 19h218), Bolt; 3/8" X 1" 3/8" X 1", Bolt; 9.525 X 25.400 mm (3/8" X 1"), Bolt; 3/8" X 1" (B), Bolt; 3/8" X 1" Hs, Sae 8, 3/8" X 1", Cap Screw; 3/8" X 1", Bolt; 3/8" X 1" (Gh-02, Dh-01, Gh-01, Hc-D, Hf-G), Bolt; 3/8" X 1", (Use With T30726 And 12h304), Bolt; 3/8" X 1", (Code 5210), Bolt; 3/8" X 1" D=9.525,L=25.4, Bolt; 3/8" X 1", (Use With R86007) (Front), Bolt; 3/8" X 1", (With Iron-Gard), Bolt; 3/8" X 1" (Idler Pulley Support Lower Hole - Frt Plate), Bolt; 3/8" X 1" Narrow, Bolt; 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1", (Order Ah138563), Bolt; 3/8" X 1", (Code 2111), Bolt; 3/8" X 1" 3/8"X1", Bolt; 3/8" X 1", (Code 2102), Bolt, Bolt; 3/8" X 1", (Sweden Only), Bolt; 3/8" X 1", Bolt; 3/8" X 1" (Sae 8) Up, Bolt; 3/8" X 1", Hs, Sae 8, Bolt; 3/8", Bolt; 3/8" X 1", (Sae 8), Bolt; (A) 3/8"X2-1/2", Bolt; 3/8" X 1", (Sub For (3) 19h1731), Bolt; 3/8" X 1", (Sae 8), Up, Bolt; 3/8" X 1", (Use With Solid Tire), Bolt; 3/8" X 1", Code 2102 And 2108, Bolt; 3/8" X 1" (Front), Cap Screw, Bolt; 3/8" X 1", Less United Kingdom And Ireland, Bolt; (B: Pull-Type) 3/8" X 1" (G), Bolt; 3/8" X 1" (Dh-02), Bolt; 3/8" X 1" (30", 4 Used) (38", 2 Used), Bolt; (B) (E) 3/8" X 1", Bolt; (A) 3/8"X1", Bolt; 3/8" X 1" Up, Bolt; 3/8" X 1" (24 Used, Without Filler Plates; 48 Used, With Filler Plates), Bolt; 3/8" X 1" Hs= 10.9; Sae 8, Bolt; 3/8" X 1", Torque To 26 Lb-Ft (35 N-M), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", (Sub (48) 19h3239), Bolt; 3/8" X 1" (Use With Re162261), Bolt; 3/8" X 1" (Idler Pulley Support L0wer Hole Frt Plate), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" Without Tilt Steering, Bolt; 3/8" X 1" (A) (Sub (48) 19h3239), Bolt; Hs, Sae 8, 3/8" X 1", Bolt; 3/8" X 1" (Use With Standard Rasp Bars) (Use With R42729 And H99923), Bolt; 3/8" X 1" (Hs, Sae 8) (9 Used, Less Cab) (4 Used, With Cab), Bolt; 3/8" X 1" (Use With Standard Rasp Bars), Bolt; 3/8" X 1", (Use With Standard Rasp Bars), Bolt; 3/8" X 1" (Tether), Bolt; 3/8" X 1" (Use With Re63295), Bolt; 3/8" X 1" 3/8" X 1" Sub For 19h218, Bolt; 3/8" X 1" (Sub For 19h1936), Bolt; 3/8" X 1", (36 Used L.H.) (36 Used R.H.), Bolt; 3/8" X 1", (Code 2108), Bolt; 3/8" X 1", Required Only If Not Equipped With Spout-Trak, Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8" X 1", Bolt; 3/8" X 1", (Use With M2152t), Bolt; 9.525 X 25.400 mm, Bolt; (A: Code 2501) (B: Code 2502) 3/8" X 1", Bolt; 3/8" X 1", (Hs, Sae 8), Bolt; 3/8" X 1", (Sub 19h3239), Bolt; 3/8" X 1" (24 And 224 Balers), Bolt; 3/8" X 1" (Sub For 19h218)	20
24***07	Washer; 13/32"X1", Washer; 13/32" X 1" X 1/16", (2 Used, A/C Factory Installed) (4 Used, A/C Adapted To Pressurized Cab), Washer; 13/32" X 1" X .060", Washer; 13/32"X1"X.60", Washer; 13/32" X 1" X 1/16", Used With Rotary Air Screen, Washer; (D) 13/32" X 1" X 1/16", Washer; (A) 13/32" X 1" X 1/16", Washer; 13/32" X 1" X 1/16" (8 Nominal), Washer; 13/32"X1"X0.060", Washer; (A) 13/32"X1", .060", Washer; 13/32" X 1" X 1/16", (750), Washer; 13/32"X, Washer; X 13/32" X 1 X .60", Washer; 13/32" X 1" X 1/16", (8 Nominal), Washer; 10.312 X 25.400 X 1.600 mm (13/32" X 1" X 1/16"), Washer; 13/32" X 1" X 1/16" Includes Gasket, Washer; 13/32" X 1" X 1/16" (A), Washer; Rh, Washer; 13/32" X 1" X 5/16", Washer; 13/32" X 1" X 1/16", With Stationary Air Screen, Washer; .060" X 13/32" X 1", Washer; 13/32" X 1" X 1/16", (A)(B), Washer; 13/32" X 1" X 1/16" Cable Trip Only, Washer; 13/32" X 1" X 1/16" (B), Washer; 13/32" X 1" X 0.060", Washer; 13/32" X 1" X 1/16" (Sub Z36140 And Z38380), Washer; 13/32" X 1" X 1/16" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 13/32" X 1" X 1/16", Used With Stationary Air Screen, Washer; 13/32x1", Washer; (B) 13/32" X 1" X 1/16", Washer; 13/32" X 1" X 1/16", With Rotary Air Screen, Washer; 13/32" X 1" X 1/16", Less United Kingdom And Ireland, Washer; 13/32" X 1" X 1/16", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 13/32" X 1" X 1/16", Washer; 13/32" X 1" X 1/16", (700), Washer; 13/32" X 1" X 1/16", Washer; (C) 13/32" X 1" X 1/16", Washer; 13/32" X 1" X 1/16", (Sub An151694), Washer; 13/32" X 1" X 1/16", (Use With H110736), Washer; 13/32' X 1" X 1/16", Washer; 13/32", Washer; 17/32" X 1" X .060", Washer; 3/8", Washer; 13/32" X 1" X 1/16" R.H., Washer; (A: Use With Front Bearing) 13/32" X 1" X 1/16", Washer; 17/32"X1"X.060", Washer; 1,5 X 10,3 X 25,4 mm, Washer; 13/32"X1"X0.60", Washer; 13/32" X 1" X 1/16" (38"), Washer; 11/32"X1"X.060", Washer; 13/32" X 1" X 1/16", (1 Used L.H.) (1 Used R.H.), Washer; 13/32"X1"X0.06", Washer; X 13/32" X 1" X .060", Washer; X 13/32" X 1" X .60", Washer; 13/32x1"X.060", Washer; 13/32" X 1" X 1/16" (Use With H110736), Washer; 13/32"X1"X.060", Washer, Washer; 13/32" X 1"X.060", Washer; 13/32" X 1" X 0,60", Washer; 13/32" X 1" X .060", Ar, Washer; X 13/32" X 1" X .060", Washer; 13/32" X 1" X 1/16", Includes Gasket, Washer; 10,3 X 25,4 X 1,5 mm, Washer; 13/32" X 1' X 1/16", Washer; 10.312 X 25.400 X 1.600 mm (13/32" X 1" X 1/16") (492, 692 And 892e), Washer; 10.312 X 25.400 X 1.600 mm, Washer; 13/32" X 1" X 1/16" (454, 554, 8 Used; 653, 6 Used), Washer; 13/32" X 1" X 0,060", Washer; 13/32" X 1" X 1/16", (Sub 24h1308)	4
24***84	Washer; (E: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 13/32" X 13/16" X 0.120", Washer; 10.312 X 20.625 X 3.048 mm (13/32" X 13/16" X 0.120"), Washer; 13/32" X 13/16" X 0.120" (A), Washer; 13/32" X 13/16" X 0.120", (36 Used 4' Reg) (48 Used 5' Reg), Washer; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 13/32" X 13/16" X 0.120", Washer; 13/32" X 13/16" X 0.120", (Use With E90235) Qty 28 Used 4'; Qty 40 Used 5', Washer; (B: (Xxxxxx- ) 4650-0102; 4850-0074) 13/32" X 13/16" X 0.120", Washer; 13/32" X 13/16" X 0.120" Nsep (Ord Al157856), Washer; (A) 13/32" X 13/16" X 0.120", Washer; 13/32" X 13/16" X 0.120", Washer; (B: (Xxxxxx- ) 4050-0061; 4250-0096; 4450-0172) 13/32" X 13/16" X 0.120", Washer; 13/32" X 13/16" X 0.120" 13/32" X 13/16" X .120", Washer; 13/32" X 13/16" X 0.120" (Nlr), Washer; 13/32" X 13/16" X 0.120" (36 Used 4' Reg) (48 Used 5' Reg), Washer; (B: (Xxxxxx-) 7600-0066; 7700-0074; 7800-01**11) 13/32" X 13/16" X 0.120", Washer; 13/32" X 13/16" X 0.120" (Use With Re198656), Washer; 13/32" X 13/16" X 0.120" (Use With Re173973), Washer; 13/32" X 13/16" X 0.120" (Use With E90235) Qty 28 Used 4'; Qty 40 Used 5', Washer, Washer; 13/32"X13/16"X.120", Washer; 13/32" X 120", Washer; 13/32" X 13/16" X 0.120" (B), Washer; (B: W/ Oos) 13/32" X 13/16" X 0.120", Washer; 13/32" X 13/16" X 0.120" 13/32" X 13/16" X 0.120", Washer; 13/32" X 13/16" X 0.120", (Code 3300 And 3303), Washer; 13/32" X 13/16" X 0.120" 13/32" X 13/16" X 0.120", (Nlr), Washer; 13/32" X 13/16" X 0.120", Washer; 13/32"X120", Washer; 13/32" X 13/16" X .120", Washer; 13/32" X 13/16" X 0.120" 13/32" X 13/16" X 0.120" (Nlr), Washer; 13/32" X 13/16" X 0.120", (Nlr), Washer; 13/32" X 13/16" X 0.120" (Use With 19h2458), Washer; (B: With Open Operator'S Station) 13/32" X 13/16" X 0.120"	4

See all parts with full part numbers in Heavy Parts AI →

Tine Tooth Harrow Shipping Bundles

John Deere : 680 - Plow, Chisel : Tine Tooth Harrow Shipping Bundles

BN***75	Complete Goods/Ship.; Order Thru Complete Goods, 3 Tine Spring Channel, Complete Goods/Ship.; (A: 3-Bar Coil-Tine Harrow) 3-Spring Channel, Complete Goods/Ship.; 3 Spring Channel, Complete Goods/Ship.; (3) 3-Spring Channels	1
BN***77	Complete Goods/Ship.; (3) 5-Spring Channels, Complete Goods/Ship.; 5 Spring Channel, Complete Goods/Ship.; (A: 3-Bar Coil-Tine Harrow) 5-Spring Channel, Complete Goods/Ship.; Order Thru Complete Goods, 5 Tine Spring Channel	1
BN***76	Complete Goods/Ship.; Order Thru Complete Goods, 4 Tine Spring Channel, Complete Goods/Ship.; (3) 4-Spring Channels, Complete Goods/Ship.; 4 Spring Channel, Complete Goods/Ship.; (A: 3-Bar Coil-Tine Harrow) 4-Spring Channel	1
BN***73	Complete Goods/Ship.; (A: 3-Bar Coil-Tine Harrow) Reinforcing Angle, Complete Goods/Ship.; Angle Channel Reinforcement, Complete Goods/Ship.; (1) Reinforcement Angle	1

See all parts with full part numbers in Heavy Parts AI →

Touchset™ Depth Control

John Deere : 680 - Plow, Chisel : Touchset™ Depth Control

12***95	Nut; (A) 4.826 mm (0.190"), Nut, Nut; 4.826 mm (0.190"), Nut; (A) 4.826 mm (0.190") Int. Tooth, Nut; 0.190" (Sub 12m7060), Nut; 0.190" 3/16", Nut; 4.826 mm (0.190") Internal Tooth, (Sub 12m7060), Nut; 0.190", (Sub 12m7060), Nut; 0.190" (For Ar56671), Nut; 4.826 mm, Nut; Internal-Tooth No. 10, Nut; 4.826 mm (0.190") Internal Tooth, Use With Ground Wire, (Sub 12m7060), Nut; 4.826 mm (0.190") External Tooth, (Sub 12m7060), Nut; 0.190", Nut; 4.826 mm (0.190") Germany, (Sub 12m7060), Nut; 0.190", Internal Tooth, Nut; Internal-Tooth, No. 10, Nut; 0.190", (Sub R74466), Nut; 4.826 mm (0.190") (Sub 12m7060), Nut; 0.190" Not Used This Application, Nut; 4.826 mm (0.190") Internal Tooth, Nut; 0.190" No. 10, Lock Washer; 0.190", Nut; 4.826 mm (0.190") (8630, 8640), Nut; No.10, Nut; No. 10, Nut; 4.826 mm (0.190") (Diesel, Less Cab), Nut; (A) (B) 4.826 mm (0.190") (Sub For Au43855) (Sub 12m7060), Nut; (A) 0.190", (Sub 12m7060), Nut; No 10, Nut; (Sub For Mg280254), Nut; 4.826 mm (0.190") All Other European Countries, (Sub 12m7060), Nut; 4.826 mm (0.190") Not Used This Application, (Sub 12m7060), Nut; Internal Tooth, No. 10, Nut; 0.190", (Sub (10) 12m7060), Nut; 10 mm, Nut; 0.190" (Internal Tooth), Nut; 0.190" (Use With At100083 And At100084), Nut; (A) No.10, Nut; 0.190" (Part Of Re15583), Nut; 0.190", (Internal Tooth), Nut; 3/16", Nut; 0.190", No. 10, Internal-Tooth, Nut; Nla	2
14***31	Nut; (A: 9901 With Temperature And Oil Pressure Gages) (B: 9902 For Enclosure Field) 0.190", Nut; 0.190", Square, Nut; 0.190" (Use With Am53945), Nut; 0.190", (Export), Nut; M6, Nut; N0.10, Nut; (A) No 10, Nut; (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" (Sender), Nut; 0.190", Unf, Nut; (A) 0.190" 0.19", Nut; (A) (B) 0.190", Unf (4 Used Per Module), Nut; (C) 0.190", Nut; 0.190", (Sub For N198083), Nut; (B) 0.190", Nut; 0.190" No. 10 Unf, Nut; 0.190", (English), Nut; (Sub Ar102763) (Also Order 12h295), Nut; 0.190", (2-On Circuit Breaker Terminals, 2-Hold Circuit Breaker To Panel, 1-Motor To Tab On Door), Nut; 0.190" No. 10 (8630, 8640), Nut; No. 10-32, Unf (4 Used Per Module), Nut; No. 10-24, (Sub For Ty4057), Nut; 0.190" (4650, 8430, 8450), Nut; No. 10-24, Nut; No. 10, Unf, Nut; (A) No. 10, Nut; 4.826 mm, Nut; No. 10-32, Unf, Nut; 0.190", Nut; 0.190" (Part Of Re15583), Nut; 4.826 mm (0.190") Unf, Nut; 0.190", (200 Per Package) (Sub For Mg87825), Nut; (A) No.10, Nut; N.10, Nut; (B) No.10, Nut; 0.190" (Sub For 14h778, This Application), Nut; 0.190" 5/16", Nut; 10-24, Nut; (B: With Cab) 0.190", Nut; 0.190", (10 Used Syncro-Range) (11 Used Power Shift), Nut; 0.190", No.10, Nut; 0.190", (Sub For Ty4057), Nut; Unf No 10, Nut; 4.826 mm (0.190") No. 10, Nut; 0.190", Unf (With Iron-Gard), Nut; Hex, 10-24, Nut; No 10, Nut; 0.190", Machine Screw, Nut; (A) 0.190", Unf, Nut; 0.190", (16 Used With Cab) (24 Used With Air Conditioning), Nut; 0.190", For Units And Auger Shaft, Nut; 0.190", (A), Nut; (B: Also Includes Sn:) 0.190", Nut; 0.190", (Use With Re41759) (3011, 3016), Nut; 0.190", (2 Used Gasoline And Lp Gas) (3 Used Diesel), Nut; 0.190", (Starter Motor Solenoid Terminal), Nut; 0.190", Germany, Nut; 0.190" (4640, 4650, 4840, 8430, 8450), Nut; No 10, Ar, Nut; 0,190", Nut, Nut; 0.190", 200 Per Package, Nut; 0.190", North America, Nut; 0.190" (Also Order 12m7060), Nut; 0.190" (19 W/ Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 4.826 mm (0.190"), Nut; (A) 0.190", Nut; 0.190", (2 Used Gasoline And Lp-Gas) (3 Used Diesel), Nut; 0.190" (20 W/Sgb) (17 W/O Sgb), Nut; No. 10, Nut; No.10, Nut; (A: If Equipped) 0.190", Nut; (A), Nut; (A) No. 10-32, Unf, Nut; 0.190", (Use With Code 7201), Nut; 0.190", Unf, (2) Furnished With Additional Function, Nut; (A) (B) 0.190", Nut; (A: 3201 Panel Gages Sp Cntrl) (B: 3202 Panel Gages Sp Cntrl) (C: 3208 Panel Gages Sp Cntrl) 0.190", Nut; 0.190", Lock, Nut; 0.190", Df, Tf, Af, Nut; 0.190", (Sub For Ar102763), Nut; 0.190", All Other European Countries, Nut, Nut; 0.190", Not Used This Application, Nut; 0.190" (For Ar56671), Nut; (A) (B) No. 10-32, Unf, Nut; 0.190" (4050), Nut; 4.826 mm (0.190") No. 10 (8630, 8640), Nut; (K) 0.190", Nut; 0.190" (A), Nut; (A) (B) (C) 0.190", Nut; 0.190", 200 Per Package, (Sub For Mg87825), Nut; 4.826 mm, Nut; 0.190", (Gasoline), Nut; 0.190" (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" 0.190", Nut; 0.190", No. 10, Nut; 0.190" (19 W/Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 0.190", (Use With Ar11109 Or Ar11116), Nut; (A: With Intelliguard) 0.190", Nut; 0.190" (Sub Ar102763) (Also Order 12h295), Nut; 0.190", Nut; 0.190", Not Applicable, Nut; 0.190" (Use With At100083 And At100084), Nut; (C: Sgb (53***01-)) 0.190", Nut; 0.190" (10-32 Unf), Nut; 0.190" (Use With Re207840)	2
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	2
14***60	Nut; (A) 1/4", Nut; (C: 2 Used With 2 Spool Valve; 3 Used With 3 Spool Valve) 1/4", Nut, Nut; 1/4" 1/4", Nut; (A: 9550 ( -70*00) 9550sh ( -7000)) 1/4", Nut; (A: ( -Xxxxxx) 4050-0014; 4250-0004; 4450-0100) 1/4", Nut; (B) 1/4", Nut; 1/4" (A), Nut; 1/4" (C), Nut; (A: 12' Main Frame) (B: 2nd Rank) 1/4", Nut; 1/4", (Not Illustrated), Nut; 1/4", Nut; 1/4" Slotted, Nut; 1/4", Unf, Nut; (D: 2 Used With 2 Function Loader Valve, 3 Used With 3 Function Loader Valve) 1/4", Nut; (A: 12" Main Frame) (B: 2nd Rank) 1/4", Nut; No. 10, Nut; 1/4" M6, Nut; 1/4", (Sub For Mg84949), Nut; 1/4", (Sub For Mg84949) ( Mg42131 Nla), Nut; 1/4", Jam, Nut; 1/4", Unf., Nut; 1/4", (Long), Nut; (D) 1/4", Nut; 1/4", Nut; 1/4" (Not Illustrated), Nut; (A: ( -Xxxxxx)8570-0091;8770-0047;8870-0027) 1/4", Nut; (D: 2 Used On 2-Spool Valve, 3 Used On 3-Spool Valve.) 1/4", Nut; 1/4" (6 Used With 2 Spool Valve; 8 Used With 3 Spool Valve), Nut; (C) 1/4", Nut; (A: 9550 (7001- ) 9550sh (70*01- )) 1/4", Nut; 1/4", Unf-2b, Nut; (E), Nut; (A: Coded Items Are Used With The 714 mm (28-1/8") Angle.) 1/4", Nut; 1/4" Unf	4

See all parts with full part numbers in Heavy Parts AI →

Transport Lights And Brackets

John Deere : 680 - Plow, Chisel : Transport Lights And Brackets

08***62	Cap Screw; (D: For 8 Weights / 10 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8" X 10-1/2", Cap Screw; (D: Eight Weights / Ten Weights) 5/8" X 10-1/2", Cap Screw; 5/8" X 10-1/2", Cap Screw; (D: 8 Weights / 10 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8" X 10-1/2", Cap Screw; 5/8" X 10-1/2", 18 Weights, Region I, Cap Screw; (D: 8 Weights / 10 Weights) 5/8" X 10-1/2", Cap Screw; (D) 15.875 X 266.700 mm, Cap Screw; 5/8" X 10-1/2" 8" Tube, Cap Screw; 5/8" X 10-1/2" 8 X 10" Tube, Cap Screw; 5/8" X 10-1/2" U/W 8 X 8 Tube, Cap Screw; 5/8" X 10-1/2" 8 X 8 Tube, Cap Screw; (E: 16r30) 5/8" X 10-1/2", Cap Screw; (D: For 8 Weights / 10 Weights) 5/8" X 10-1/2"	4
14***86	Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-0100; 4255-0100; 4455-0200) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-0030; 8760-0021; 8960-0036) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-7000) 9550sh (-7000)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-7000) & 9750sts (-70*00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"	2
19***98	Cap Screw; 1/4" X 1-1/2", L.H., Cap Screw; 1/4" X 1-1/2" (Use With 12h302 And 14h786), (Lip Type), Cap Screw; (A: For 9650 Sts ( -70*00) & 9750sts ( -7000)) 1/4" X 1-1/2", Cap Screw; 6.350 X 38.100 mm (1/4" X 1-1/2"), Cap Screw; (A: 9550 ( -7000) 9550sh ( -70*00)) 1/4" X 1-1/2", Cap Screw; 1/4" X 1-1/4", Cap Screw; 6.350 X 38.100 mm (1/4" X 1-1/2"), Cap Screw; 1/4" X 1-1/2", (Sub For 19m7874), Cap Screw; 1/4 X 1-1/2", Cap Screw; 1/4" X 1-1/2", Cap Screw, Cap Screw; 1/4" X 1-1/2", Keys 1a And 2a Replace Keys 1 And 2 To Fasten Cover Assembly To Shaft After 1998., Cap Screw; 1/4" X 1-1/2" (Use With 14h786), Cap Screw; 1/4"X1-1/2", Cap Screw; 1/4" X 1-1/2" (Lip Type), Cap Screw; 1/4" X 1-1/2", 1/4 X 1-1/2", Cap Screw; 1/4" X 1-1/2", (L.H. Side Only), Cap Screw; 1/4" X 1-1/2" (Lh Side Only)	2
19***62	Cap Screw; M12 X 30, Cap Screw; (A: From Sr.No.5103e-00*54, 5103-0165, 5103s-0162, 5203-0062, 5104/5204-0001, 5038d-0001.) M8 X 16, Cap Screw; M8 X 16 M8x16 (8.8), Cap Screw; M8 X 16, M8x80, Cap Screw; (A: W/ Stationary Right-Hand Glass) M8 X 16, Cap Screw; M8 X 16 Sub For J010816, Cap Screw; M8 X 16, (Use With Ce18934), Cap Screw; M8 X 16 (Torque = 27 N.M (20 Ft-Lb)), Cap Screw; (C: With Fwd-Axle With Tls) M8 X 16, Cap Screw; M8x16 (For Al70298), Cap Screw; M8x16,L.H., Cap Screw; (A: Upto Sr.No.5103e-0053, 5103-0164, 5103s-0161, 5203-0061.) M8 X 16 For Heavy Duty Transmission, Cap Screw; (B: Only For Loader With Suspension) M8 X 16, Cap Screw; M8 X 16, (Sub For J900816), Cap Screw; 8 X 16mm, Cap Screw; (B: With Fwd-Axle With Tls) M8 X 16, Cap Screw; M8x18, Cap Screw; (For Al70298), Cap Screw; (A: (6068hn053)) M8 X 16, Cap Screw; M8 X 16, (Sub For 4322, Along With 24m7036 And 12m7065), Cap Screw; M8 X 16 Use With Al176965, Cap Screw; (A: Control For Grapple) M8 X 16, Cap Screw; M8 X 16 (Sub For J900816), Cap Screw; M8 X 16 (10.9), Cap Screw; M8 X 16 (Use With Ah96317), Cap Screw; M8 X 16 Lh, Rh, Cap Screw; 8x18mm, Cap Screw, Cap Screw; M8 X 16 (For Axe12941), Cap Screw; M8 X 16 Sub For J020816, Cap Screw; M8 X 16 Sub For Thj970816; Sub For J952010, Cap Screw; (A: Used In 5415 And 5715 Orchard Tractors) M8 X 16, Cap Screw; 8x1,25x12mm (Sub For 19m3127), Cap Screw; (A: Upto Sr.No. 5103s-0161, 5203-0061.) M8 X 16, Cap Screw; M8 X 16 Sub For J050816, Cap Screw; M8 X 16 M8x16, Cap Screw; (B: For Pickup 1.41 M) M8 X 16, Cap Screw; (B: Without Air Conditioning System / With Air Compressor) M8 X 16, Cap Screw; M8 X 16 (European), Cap Screw; (Sub For J900816), Cap Screw; 8x16mm, Cap Screw; (B) M8x16, Cap Screw; 8x15mm, Cap Screw; M8 X 16 Lh. Rh, Cap Screw; (A: Used In High Clearance Tractors) M8 X 16, Cap Screw; M8 X 16 (Sub For J260816) (Also Order 24m7055), Cap Screw; (A) (B) M8 X 16, Cap Screw; M8 X 16 Sub For J900825, Cap Screw; M8 X 16, (312) M8x16, Cap Screw; L.H. M8x16, Cap Screw; M6 X 16, Cap Screw; M8 X 16 (Includes Ch15002), Cap Screw; M8 X 16 Sub For J260814, Cap Screw; (B) M8 X 16, Cap Screw; M8x55, Cap Screw; (A: Without Air Conditioning System / With Air Compressor) M8 X 16, Cap Screw; M8 X 16, (Sub 19m7162 And 12m7065), Cap Screw; M8 X 16, (Sub For 4322, Along 12m7065), Cap Screw; (A: From Sr.No. 5103s-0162, 5203-0062, 5104/5204/5038d-0001.) M8 X 16, Cap Screw; M8 X 25, Cap Screw; (A: For Float Position/Boom Suspension Option) M8 X 16, Cap Screw; M8 X 16 (For Al176965), Cap Screw; (A: Collarshift Transmission (5220) Sn 4211- (5320) Sn 4307-) M8 X 16, Cap Screw; M8 X 16 W/ Mechanical Front Wheel Drive, Cap Screw; (C: Without Air Conditioning System / With Air Compressor) M8 X 16, Cap Screw; M8 X 16 (Hs=10.9), Cap Screw; (A: With Fwd-Axle With Tls) M8 X 16, Cap Screw; M8 X 16 Torque = 27 N.M (20 Ft-Lb), Cap Screw; (D: Without Air Conditioning System / With Air Compressor) M8 X 16, Cap Screw; M8 X 16 (Sub For J260816), Cap Screw; M8 X 16 (Sub For J901030, Cap Screw; (A) (Use With N278931 Gear Case), Cap Screw; 8x16x1,25mm, Cap Screw; M8 X 15 (Sub For 19m7084), Cap Screw; M8 X 55, Cap Screw; M8 X 16 (1000 Rpm Only), Cap Screw; (A) 8x16mm, Cap Screw; M8 X 16 (Use With Ce18934), Cap Screw; (A: Upto Sr.No.5103e-0053, 5103-0164, 5103s-0161, 5203-0061.) M8 X 16 For Light Duty Transmission, Cap Screw; (A: With Elektr. Reverser Control) M8 X 16, Cap Screw; M8 X 16, (Sub For At214308 Or 4322, Along With 24m7162 And 12m7065), Cap Screw; M8 X 16 (Sub For J900816) (J260816 Nla), Cap Screw; M8 X 16 (Sub For J900814), Cap Screw; M8 X 16 (For Al119373), Cap Screw; M8 X 16 Hs=10.9, Cap Screw; M8x25, Cap Screw; (A: Collarshift Transmission (5420) Sn 4413- (5520) Sn 4504-) M8 X 16, Cap Screw; (A: Used In High Clearance Tractors Too) M8 X 16, Cap Screw; (A: Used With 3 Spool Loader Control Valve) M8 X 16, Cap Screw; (A: Used In 5425 And 5725 Orchard Tractors Too) M8 X 16, Cap Screw; M8x16, Cap Screw; M8 X 16 Sub For J900814, Cap Screw; M8x16, L.H., Cap Screw; M8 X 16, (For Al70298), Cap Screw; M8 X 16 (Rh), Cap Screw; 8x1.25x12mm (Sub For 19m3123), Cap Screw; M8 X 18, Cap Screw; M8 X 16 Rh, Cap Screw; M8 X 16 (8.8), Cap Screw; M8 X 16 (Sub For (1) J900816)(Not Illustrated), Cap Screw; M8 X 16 (J260814 Nla), Cap Screw; M8x15, Cap Screw; (A: Engine With 2 Thermostats) M8 X 16, Cap Screw; M8 X 16, M8x16, Cap Screw; M8 X 16, M8 X 16, Cap Screw; (A: For 1, 81 Meter Pickup) M8 X 16, Cap Screw; M8 X 16 (Also Order 24m7055) (Sub For J260816, J900816), Cap Screw; (A: Rice/Corn) M8 X 16, Cap Screw; M8 X 16 Pq/Pst, Cap Screw; M8 X 16, (Sub For Ffsb107125), Cap Screw; (A: With Option Transmission Housing) M8 X 16, Cap Screw; M8 X 15, Cap Screw; M8 X 16, Cap Screw; (D: (-X012752) & (-X026220) & (-X014034)) M8 X 16, Cap Screw; (A: Red Warning Light Assembly) M8 X 16, Cap Screw; M8 X 16, (Sub For Ffsb107144 Or 4322, Along With 24m7036 And 12m7065), Cap Screw; (A: Only For North America And Japan) M8 X 16, Cap Screw; M8 X 16 (For Al110920), Cap Screw; (A: With Electrical Reverser Control) M8 X 16, Cap Screw; M8 X 16 (Sub For 19m7139), Cap Screw; (A) M8 X 15, Cap Screw; M8x1,25x16, Cap Screw; M8 X 20, Cap Screw; (A: 3-Spool Valve) M8 X 16, Cap Screw; M8 X 16, (Use With At103789), Cap Screw; (A: Collarshift Transmission (5420) Sn 4413- (5520) Sn 4504-) M8 X 16 (Hs=10.9), Cap Screw; M8 X 16 M8 X 16, Cap Screw; (A: For Loader Valve With 3 Functions) M8 X 16, Cap Screw; M8 X 16, (Sub For At214308 Or 4322, Along With 24m7036 And 12m7065), Cap Screw; (A) M8x16, Cap Screw; (A: Collarshift Transmission (5220) Sn 4211- (5320) Sn 4307-) M8 X 16 (Hs=10.9), Cap Screw; M8 X 16 (Sub For Er020776 Appl), Cap Screw; (A) M8x18, Cap Screw; (A) M8 X 16, Cap Screw; M8 X 16 (A), Cap Screw; M8 X 16 Sub For J900816, Cap Screw; M8 X 16, Cap Screw; (A), Cap Screw; M8 X 16, Full Thread, Cap Screw; (A: For Pickup 1, 81 M) M8 X 16, Cap Screw; M8 X 16 (Sub For J901025), Cap Screw; M8 X 16, (312), Cap Screw; (A: Upto Sr.No.5103e-0053, 5103-0164, 5103s-0161, 5203-00*61.) M8 X 16	2

See all parts with full part numbers in Heavy Parts AI →

Transport Lockup Valve Mounting

John Deere : 680 - Plow, Chisel : Transport Lockup Valve Mounting

19***28	Screw; (B: Quad-Range Transmission) 3/8" X 4", Screw; 3/8" X 4", With Cab, Screw; 3/8" X 4", (Use With Ar60701), Screw; 3/8 X 4, Screw; (B: (Xxxxxx- ) 4050-00*44 (Qrt)) 3/8" X 4", Screw; 3/8"X4", Screw; 3/8" X 4" (Qrt) (Pst), Screw; (B) 3/8" X 4", (Rear Flange Center Hole), Screw; 3/8" X 4" (With Level Lift Hitch), Screw; (A: Quad-Range Transmission) 3/8" X 4", Screw; 3/8" X 4" Rh, Screw; 3/8" X 4", (Europe), Screw; (B: Power Shift Transmission) 3/8" X 4", Screw; 3/8" X 4" (Sub 19h3404 And M72490), Screw; (B: Quad-Range Transmission) (F: (Xxxxxx- ) 4050-0044 (Qrt)) 3/8" X 4", Screw; 3/8"X3/4", Screw; 9.525 X 101.600 mm, Screw; (B: Quad-Range Transmission) (C: ( -Xxxxxx) 4055-0100; 4255-0100; 4455-02**00) 3/8" X 4", Screw; 3/8" X 4" (Qrt), Screw; 3/8" X 4", Screw; 3/8" X 4", (Sub 19h3404 And M72490), Screw; 3/8" X 4", (Sub 19h3404 And R70234), Screw; 3/8" X 4", (Sub Pt12948), Screw; 3/8" X 4" (Use With N187584), Screw, Screw; 3/8"X7/8", Screw; 3/8" X 4" (Rh), Screw; 3/8" X 4" (Sub 19h3404 And R70234), Screw; 3/8" X 4" (Sub For 19h1854), Screw; (A) 3/8" X 4", Screw; 3/8" X 4" (Europe)	2
19***33	Screw; 3/8" X 1-1/2" (Hs Sae 8), Screw; 9.525 X 38.100 mm (3/8" X 1-1/2"), Screw; 3/8" X 1-1/2" Sae 8; Low, Screw; 3/8" X 1-1/2", (Use With Ah66262), Screw; 3/8" X 1-1/2" 3/8 Unc-2a X 1 1/2 A17d Zn, Screw; 3/8" X 1-1/2" 3/8" X 1 1/2", Cap Screw; 3/8" X 1-1/2", Screw; (C: Code 1709 With Air Cleaner Mounting Pad) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" (D), Screw; 3/8"X1-1/2" For, 3179dl013, Screw; (B) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (1 Used L.H.) (1 Used R.H.), Screw; 3/8" X 1-1/2" Torque To 45 Lb-Ft (61 N-M), Screw; (A: Included In Ae48634) 3/8" X 1-1/2" For Use W/L.H. Gage Wheel Only, Screw; 3/8" X 1-1/2", (Use With Re61619), Screw; 9.525 X 38.100 mm, (Sae 8), Screw; 3/8" X 1-1/2" Hs, Sae 8, 3/8" X 1-1/2", Screw, Screw; 3/8" X 1-1/2" (Use With Re500917), Screw; 3/8" X 1-1/2" (A), Screw; (A) (B) 3/8" X 1-1/2" For Long Tooth Pickup Order H78421 Screw., Screw; 3/8" X 1-1/2", (Sae 8), Screw; 3/8" X 1-1/2" Sae 8, Cap Screw; 9.525 X 38.100 mm, Cap Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2" (Hs, Sae 8) (Sub For 19h1116), Screw; 3/8" X 1-1/2" (Dh-01, Dh-02, Gh-01, Gh-02, Hc-D, Hf-G), Screw; 3/8" X 1-1/2", (Use With 15h624), Screw; 3/8" X 1-1/2", (Code 1703), Screw; 3/8" X 1-1/2" (Sae 8), Low, Screw; 3/8" X 1-1/2" (Sae 8), Screw; 3/8" X 1-1/2", Hs, Sae 8, 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", (2034), Screw; 3/8" X 1-1/2", (Use With Re500917), Screw; 3/8" X 1-1/2", (Use With E95899), Screw; 3/8"X1-1/2" For, 3179dl004, Screw; 3/8"X1-1/2", (For 3179dl001), Screw; (Sub For R40808 Or R112876, This Application), Screw; Hs, Sae 8, 3/8" X 1-1/2", Cap Screw, Screw; 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2", Screw; 3/8" X 1-1/2" 3/8" X 1-1/2" (Hs, Sae 8), Screw; (Sub For R40808 Or R112876), Screw; 3/8"X1-1/2" (Sub For 19h1765, 19h1800), Screw; 9.525 X 38.100 mm, Screw; 3/8" X 1-1/2", Up, Screw; 3/8" X 1-1/2", (Hd-G), Screw; 3/8"X1-1/2" (Sub For 19h1765), Screw; 3/8" X 1-1/2", (Sub For 19h3385, This Application), Screw; 3/8" X 1-1/2", (Na-D, Na-G, Dn-01, Gn-01), Screw; 3/8" X 1-1/2", (Short Tongue), Screw; 3/8" X 1-1/2", (Gas), Screw; 3/8" X 1-1/2" (913, 915, -64*49, 3 Used) (915, 64*50-, 918, 920, 922, 924, 925, 930, 5 Used), Screw; 3/8" X 1-1/2" 3/8 Unc-2ax1/2 A17d Zn, Screw; 3/8" X 1-1/2", Low, Screw; 3/8" X 1-1/2", (Long Tongue), Screw; 3/8" X 1-1/2" (6081hh010), Screw; 3/8" X 1-1/2", (Ha-G, Ha-D, Ha-L, Hb-G, Hb-D, Hb-L, Hc-G, Na-D, Na-G, Na-L), Screw; 3/8" X 1-1/2" (For Re500917), Screw; 3/8" X 1-1/2" (Short Tongue), Screw; (C: Code 1703 Air Intake Short) 3/8" X 1-1/2", Screw; 3/8" X 1-1/2", Full Thread, (Sub For 19h2471), Screw; 3/8" X 1-1/2", For Use W/L.H. Pickup Gage Whl Only, Screw; 3/8" X 1-1/2" (Rigid), Screw; 3/8" X 1-1/2" (Sae 8) , Low, Screw; 3/8" X 1-1/2" (Hs, Sae 8), Screw; 3/8" X 1-1/2", (Hs, Sae 8), Screw; (A) 3/8" X 1-1/2", Screw; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", Screw; 3/8" X 1-1/2" For Use W/L.H. Gauge Wheel Only, Screw; 3/8"X1-1/2", (For 3179dl016), Screw; 3/8"X1-1/2", (Sub For 19h1765), Screw; (Sub For R112876 Or R40808, This Application), Screw; 3/8" X 1-1/2", (Sub For T31783, This Application), Screw; 3/8" X 1-1/2", (1708), Screw; 3/8" X 1-1/2" (Long Tongue), Screw; 3/8"X1-1/2", For 3179dl001, Screw; 3/8" X 1-1/2" (Hs=10.9), Sae 8, Screw; 3/8" X 1-1/2" Incld With Engine, Screw; 3/8" X 1-1/2", (1703), Screw; (C) 3/8" X 1-1/2", Screw; 3/8"X1-1/2", For 3179dl016	1
AN***06	Valve; (Sub For Aa14834, This Application), Valve; Needle, Valve; Shut-Off, Valve; (3.5 Turns To Close), Valve; (A), Valve; (3-1/2 Turns To Close), Valve, Valve; Shut Off, Valve; Transport Lockup, Valve; Flow Control	1
AT***99	Elbow Fitting; 45 Degree Adjustable, Elbow Fitting; 45 Degree, Elbow Fitting; Lh (Sub For Ar26745), Elbow Fitting; (A) 45°, (Modified 5400) (Sub For Ar26745), Elbow Fitting; 45° 3/4" Male O-Ring X 3/4" Male Jic, Elbow Fitting; With O-Ring, Elbow Fitting; 45 Degree Elbow, Elbow Fitting; 45°, (Sub For Ar26745, This Application), Elbow Fitting, Elbow Fitting; 45°, (Sub For Ar26745), Elbow Fitting; 45° (Sub For Ar26745), Elbow Fitting; 45° (Sub For (1) At32332 Or (1) Aa22978), Elbow Fitting; Adjustable, 45 Degree, Elbow Fitting; (B: With Grapple) (Sub For Aa22978), Elbow Fitting; 45° (Sub For At32332 Or Aa22978), Elbow Fitting; 45° (For Drawn Rigid Models Only), Elbow Fitting; Adjustable, 45°, Elbow Fitting; 37°, (Sub For Ar26745), Elbow Fitting; Use With Level Lift Hitch And Floating Hitch, Elbow Fitting; (Sub For Ar26745), Elbow Fitting; (Sub For Aa22978) (Includes R26375), Elbow Fitting; 45°, Adjustable, (Sub For Ar26745), Elbow Fitting; 45° Adjustable, Elbow Fitting; (Sub For Au11581), Elbow Fitting; Use With Level Lift Hitch And Floating Hitch Only, Elbow Fitting; (Sub For Ar26763), Elbow Fitting; 45° (Sub For (1) Aa22978), Elbow Fitting; 45°, Elbow Fitting; 37° (Sub For Ar26745 45°), Elbow Fitting; (Sub For Aa22978), Elbow Fitting; Use With Level Lift Hitch Or Floating Hitch Only, Elbow Fitting; Relief	1

See all parts with full part numbers in Heavy Parts AI →

Tine Bars And Tines (Tine Tooth Harrow Attachment)

John Deere : 680 - Plow, Chisel : Tine Bars And Tines (Tine Tooth Harrow Attachment)

E5***06	Flange Nut; Lock, Flange Nut; (A: 9550 (69*01- ) 9550sh (6901- )) 9.525 mm, Flange Nut; (B) 3/8", Flange Nut; (A: 9550 ( -6900) 9550sh ( -6900)), Flange Nut; 9.525 mm (3/8"), Flange Nut; (Sub (4) N10215), Flange Nut; (Sub N10215), Flange Nut; (A: 9550 (6901- ) 9550sh (6901- )), Flange Nut; (A: 9550 ( -6900) 9550sh ( -69*00)) 9.525 mm, Flange Nut; (A) 3/8", Flange Nut; (D) 3/8", Flange Nut; (A) 9.525 mm, Flange Nut; 3/8", 4 X 4 Frame, Flange Nut; (B) (C) 3/8", Flange Nut, Flange Nut; 9.525 mm, Flange Nut; 9.525 mm Main Frame, Flange Nut; 3/8" (20'-11"), Flange Nut; (Sub For M47015), Flange Nut; 3/8", Flange Nut; (A), Flange Nut; 3/8", (Sub E50102), Flange Nut; (A: Option), Flange Nut; (B), Flange Nut; (Sub For W30616, This Application), Flange Nut; Flex Fold, Flange Nut; (Sub For W30616)	0
N2***50	Channel; 2070 mm 5 Tine, Channel; 2070 mm (81-1/2") 5 Tine (Sub For N188902), Channel; 2070 mm (81-1/2") 5 Tine, (Sub For N188902), Channel; 2070 mm (81-1/2") 5 Tine, Channel; 2070 mm, 5 Tine	0
N2***53	Extension Spring	0
N2***49	Channel; 1613 mm (63-1/2") 4 Tine (Sub For N188611), Channel; 1613 mm (63-1/2") 4 Tine, (Sub For N188611), Channel; 1613 mm (63-1/2") 4 Tine, Channel; 4 Tine, Channel; 1613 mm, 4 Tine, Channel; 1613 mm 4 Tine	0

See all parts with full part numbers in Heavy Parts AI →

Wheatland, Tru-Width™ And Chisel Sweeps

John Deere : 680 - Plow, Chisel : Wheatland, Tru-Width™ And Chisel Sweeps

N1***84	Sweep; (A: Wheatland Sweeps) 457 mm (18"), Sweep; 457 mm (18") (Sub For N130108), Sweep; 457 mm (18") Regular Wheatland, Sweep; Wheatland, 457 mm (18"), Sweep; 458 mm (18") Wheatland, Sweep; (C: Medium Crown Wheatland Sweeps) 457 mm (18"), Sweep; 18" (Sub For N130108), Sweep; (B: Medium Crown Wheatland Sweeps) 457 mm (18"), Sweep; Wheatland, 457 mm (18") (Sub For N130108), Sweep; 457 mm (18")	1
N1***85	Sweep; 20" (Sub For N130109), Sweep; (C: Medium Crown Wheatland Sweeps) 508 mm (20"), Sweep; Wheatland, 508 mm (20"), Sweep; 508 mm (20") (Sub For N130109), Sweep; (A: Wheatland Sweeps) 508 mm (20"), Sweep; 508 mm (20"), Sweep; (B: Medium Crown Wheatland Sweeps) 508 mm (20"), Sweep; Wheatland, 508 mm (20") (Sub For N130109)	1
N1***38	Sweep; (D: Medium Crown Tru-Width Sweeps) 457 mm (18"), Sweep; (E: Medium Crown Tru-Width Sweeps) 457 mm (18"), Sweep; Tru-Widthru-Width, Sweep; 458 mm (18") Tru-Width, Sweep; (A: Wheatland Sweeps) 457 mm (18") Tru-Width, (Wide Wing), Sweep; 457 mm (18")	1
N1***77	Sweep; 406 mm (16"), Sweep; 16" (Sub For N130114), Sweep; Low-Crown 406 mm (16") (Sub For N130114), Sweep; Wheatland, Low Crown, 406 mm (16"), Sweep; (B: Low Crown Wheatland Sweeps) 406 mm (16"), Sweep; (A: Low Crown Wheatland Sweeps) 406 mm (16"), Sweep; (A: Wheatland Sweeps) 406 mm (16") Low-Crown, Sweep; L0w-Crowm, 406 mm (16") (Sub For N130114), Sweep; 16" Low-Crown, Sweep; Wheatland, Low Crown, 406 mm (16") (Sub For N130114)	1

See all parts with full part numbers in Heavy Parts AI →

Wheel And Hub

John Deere : 680 - Plow, Chisel : Wheel And Hub

11***39	Cotter Pin; 5/32" X 1" (W/ Dc18522 Or Dc19467 Grid D14), Cotter Pin; 5/32" X 1", For 7 Section, Cotter Pin; 5/32" X 1", For 5 Section, Cotter Pin; 5/32" X 1" Grass Seed Only, Cotter Pin; 5/32" X 1", For 6 Section, Cotter Pin; 5/32" X 1", R.H., Cotter Pin; 5/32"X1", Cotter Pin; 5/32" X 1" (For L77580), Cotter Pin, Cotter Pin; 5/32" X 1" Grass Seed, Cotter Pin; 5/32" X 1" (W/ Dc18522 Or Dc19467), Cotter Pin; 5/32" X 1" 5/32"X1" (For L77580), Cotter Pin; 3.962 X 25.400 mm, Cotter Pin; 5/32" X 1", For 4 Section, Cotter Pin; 5/32" X 1", L.H., Cotter Pin; (A) 5/32" X 1", Cotter Pin; (A) 5/32"X1", Cotter Pin; 5/32"X1" (Para L77580), Cotter Pin; 5/32", Cotter Pin; 5/32" X 1"	1
14***02	Nut; (B: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4", Slotted, Fine Thread, Nut; 1/4", Nut; 3/4" 3/4" Slotted, Nut; 3/4" 3/4", Slotted, Nut; 3/4", Unf, Nut; (C: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4'(For Al34936), Nut; 3/4" (Slotted), Nut; 3/4" 2wd, Nut; (A: Slotted) 3/4", Nut; 18mm, Nut; 3/4", (Slotted), Nut; 3/4", (Sub 14h1086), Nut; 3/4" 3/4", Nut; 3/4", Unf., Nut; 5/8", Nut; Slotted, Nut; 3/4" 3/4" Unf, Nut; No. 0.210, Nut; 3/4", Nut; 3/4", (U/W Heavy Duty Dual Axle), Nut; 3/4" Hex Slotted, Nut; (A: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4"(For Al34935), Nut; (A), Nut; (A) 3/4", Nut; (A) (B) 3/4", Nut; Rh, Lh, Nut; 19.050 mm (3/4") 3/4", Slotted, Nut; 3/4" (Sub 14h902,This Application And11h237), Nut; 3/4', Slotted, Nut; 5/8", Rh, Lh, Nut; (B: (Regular Duty) Two-Wheel Drive) (C: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/8", Td, Nut; 5/8" Rh, Lh, Nut; (A: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4" (Use With An232006), Nut; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 3/4", Nut; 3/4", Unf, Slotted, Nut; 19.050 mm (3/4"), Nut; 3/4" Slotted, Nut; 3/4" Unf, Nut, Nut; 3/4" Unf, Slotted, Nut; Rh, 5/8", Nut; 19.050 mm (3/4") (Sub 14h1086), Nut; 3/4" (Sub For 14h904, This Application) (Use With 11h237), Nut; 3/4", Slotted, Unf, Nut; 3/4", Slotted, Nut; 3/4" Unf Slotted	1
AH***17	Seal; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")), Seal; (B), Seal, Seal; (A) (B), Seal; (A)	1
AN***49	Tire Valve Stem; For Tubeless Tire, Tire Valve Stem; (A: Main Frame) (B: Wing Frame), Tire Valve Stem; W/O Calcium Chloride Tubeless, Tire Valve Stem; (Tubeless) (Sub For At37037 (Without Calcium Chloride)), Tire Valve Stem; (7.6 X 15-6 And 11 X 15-8 Tires), Tire Valve Stem; (11l X 15 Tires), Tire Valve Stem; (Tubeless) (Sub For At37037 And At38142), Tire Valve Stem; (Use With Tubeless Tires), Tire Valve Stem; Inside, Tire Valve Stem; (Tubeless) (Sub For At37037), Tire Valve Stem; (C) (For Use With Tubeless Tire On Jd1091 Wheel), Tire Valve Stem; (For 11l-15 Tire), Tire Valve Stem; (11 X 15-8 Tires), Tire Valve Stem; (Use With Lva13909 Rim), Tire Valve Stem; (Use With Jd1091), Tire Valve Stem, Tire Valve Stem; Rear (R4), Tire Valve Stem; (For 9.5l-15 8pr Tire), Tire Valve Stem; (Use With Lva13902 Rim), Tire Valve Stem; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")), Tire Valve Stem; Use With Jd1091 Wheel., Tire Valve Stem; (Use With Jd3043), Tire Valve Stem; (Use With Lva13905)	1

See all parts with full part numbers in Heavy Parts AI →

Wheel Covers

John Deere : 680 - Plow, Chisel : Wheel Covers

03***02	Bolt, Bolt; 1/2" X 5" (9.5l X 15 And 11l X 15) Outside Only, Bolt; 1/2" X 5" Outside Only (9.5l X 15 And 11l X 15), Bolt; 1/2" X 5" (A), Bolt; 1/2" X 5" (Use With Extra Weights), Bolt; (B) 1/2" X 5", Bolt; 1/2" X 5", Bolt; 1/2" X 5" (For Outside Idler Bracket)	4
03***72	Bolt; Lh, 1/2" X 4-1/2", Bolt; (A) 1/2" X 4-1/2", Bolt; 1/2" X 4-1/2", Bolt; 1/2" X 4-1/2" (7.60 X 15) Inner Only, Bolt; 1/2" X 4-1/2" Inner Only (7.60 X 15), Bolt; Lh, 1/2"X4-1/2", Bolt; 1/2" X 4,5", Bolt; 1/2"X4-1/2"	4
03***11	Bolt; 1/2" X 5-1/2", Bolt; 1/2" X 5-1/2" (9.5l X 15 And 11l X 15) Inner Only, Bolt; 1/2" X 5-1/2" Inner Only (9.5l X 15 And 11l X 15), Bolt; 1/2" X 5-1/2", (4484, 5184)	4
03***52	Bolt; 1/2" X 4" (A), Bolt; 1/2" X 4" Outside Only (7.60 X 15), Bolt; 1/2" X 4" (7.60 X 15) Outside Only, Bolt; 1/2" X 4", Bolt; 1/2" X 4", (For Transport Bracket)	4

See all parts with full part numbers in Heavy Parts AI →

Wheel Support

John Deere : 680 - Plow, Chisel : Wheel Support

03***17	Bolt; (A: 11 Foot Main Frame And All Wings.) (C: All Wings Xxxx-) 1" X 6", Bolt; (A) 1" X 6", Bolt; 1" X 6"	1
03***46	Bolt; (B: 11 Foot And 13 Foot Main Frame) 1" X 7-1/4", Bolt; 1" X 7-1/4", Bolt; 1" X 7-1/4", (Hs, Sae 8)	1
14***02	Nut; (B: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4", Slotted, Fine Thread, Nut; 1/4", Nut; 3/4" 3/4" Slotted, Nut; 3/4" 3/4", Slotted, Nut; 3/4", Unf, Nut; (C: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4'(For Al34936), Nut; 3/4" (Slotted), Nut; 3/4" 2wd, Nut; (A: Slotted) 3/4", Nut; 18mm, Nut; 3/4", (Slotted), Nut; 3/4", (Sub 14h1086), Nut; 3/4" 3/4", Nut; 3/4", Unf., Nut; 5/8", Nut; Slotted, Nut; 3/4" 3/4" Unf, Nut; No. 0.210, Nut; 3/4", Nut; 3/4", (U/W Heavy Duty Dual Axle), Nut; 3/4" Hex Slotted, Nut; (A: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4"(For Al34935), Nut; (A), Nut; (A) 3/4", Nut; (A) (B) 3/4", Nut; Rh, Lh, Nut; 19.050 mm (3/4") 3/4", Slotted, Nut; 3/4" (Sub 14h902,This Application And11h237), Nut; 3/4', Slotted, Nut; 5/8", Rh, Lh, Nut; (B: (Regular Duty) Two-Wheel Drive) (C: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/8", Td, Nut; 5/8" Rh, Lh, Nut; (A: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4" (Use With An232006), Nut; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 3/4", Nut; 3/4", Unf, Slotted, Nut; 19.050 mm (3/4"), Nut; 3/4" Slotted, Nut; 3/4" Unf, Nut, Nut; 3/4" Unf, Slotted, Nut; Rh, 5/8", Nut; 19.050 mm (3/4") (Sub 14h1086), Nut; 3/4" (Sub For 14h904, This Application) (Use With 11h237), Nut; 3/4", Slotted, Unf, Nut; 3/4", Slotted, Nut; 3/4" Unf Slotted	2
AN***24	Support, Support; (B: 11 Foot And 13 Foot Main Frame), Support; 31 Ft, 37 Ft, 41 Ft And 45 Ft For 7.5", 10" Spacing, Support; 31 Ft, 37 Ft, 41 Ft And 45 Ft For 7.5", 10" And 15" Spacing	1

See all parts with full part numbers in Heavy Parts AI →

Wing Frames

John Deere : 680 - Plow, Chisel : Wing Frames

14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	0
19***23	Cap Screw; 5/8"X5-1/2", Cap Screw; 5/8" X 5-1/2" (For R64100), Cap Screw; 5/8" X 5-1/2" (For 25 And 27-Foot Only), Cap Screw; (B) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (4 Used, 47 Thru 51-Foot Machine), Cap Screw; Low, 5/8"X5-1/2", Cap Screw; 5/8" X 5-1/2" (Use With Mechanical Depth Control), Cap Screw; 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Sub For T20089 And 19h2351, This Application), Cap Screw; (A: Narrow) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Use With N138383), Cap Screw; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", Bwa Only, Cap Screw; Low, 5/8" X 5-1/2", Cap Screw; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" X 5-1/2" (Sub For 19h3174, 19m8019), Cap Screw; (C) 5/8" X 5-1/2", Cap Screw; (A: Main Frame, Wingframe (3 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer) 5/8" X 5-1/2", Cap Screw; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (For 4" X 4" Frame), Cap Screw; 5/8" X 5-1/2" (For 23 Thru 27-Foot Machines), Cap Screw; 5/8" X 5-1/2", (Used On 24-Ft And 30-Ft Models), Cap Screw; (D) 5/8" X 5-1/2", Cap Screw; (A) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (With Drawbar Offset-Front Hole), Cap Screw; (A) (B) (C) 5/8" X 5-1/2", On Right Rear Frame, Outer End, Cap Screw; (A: Main Frame, Wing Frame (3 Section)) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Used On 24 And 30 Ft.), Cap Screw; 15.875 X 139.700 mm (5/8" X 5-1/2"), Cap Screw; 5/8" X 5-1/2", (For 23' Thru 28'4" Machines), Cap Screw; (D) 5/8" X 5-1/2", On Right Rear Frame, Outer End, Cap Screw; 5/8" X 5-1/2", For 4" X 4" (102 X 102 mm) Frame (Lower), Cap Screw; 5/8" X 5-1/2", Lower Holes, Cap Screw; 5/8" X 5-1/2" Wide, Cap Screw; (B) (C) 5/8" X 5-1/2", Cap Screw; 5/8" X 5-1/2", (Use With 1-3/8" Drawbar), Cap Screw; 5/8" X 5-1/2", Lower Holes (For 6359d Engine), Cap Screw; 5/8" X 5-1/2", (For 102 X 102 mm (4" X 4") Frame), Cap Screw; (A: 27 Ft - 9 In) (B: 30 Ft - 9 In (Illustrated)) 5/8" X 5-1/2", Cap Screw; (E) 5/8" X 5-1/2"	8
19***33	Cap Screw; 5/8" X 3-1/2" Drawbar, Cap Screw; 5/8" X 3-1/2", Auxiliary Hydraulic System, Cap Screw; 5/8" X 3-1/2" Main Frame Hinge, Cap Screw; 5/8" X 3-1/2", (8-Foot (2.44 M)), Cap Screw; (A) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", Front Extension Support, Cap Screw; (A: For 11 And 13 Standards) 5/8" X 3-1/2", Cap Screw; (5/8"X3-1/2"), Cap Screw; 5/8" X 3-1/2" 18'9" And 21'9", Cap Screw; (A) 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2", (With Differential Lock), Cap Screw; 5/8" X 3-1/2", (Used On 19 Ft.), Cap Screw; 5/8" X 3-1/2", (16 X 6 Disk) (8 X 12 And 10 X 10 Hoe), Cap Screw; 5/8" X 3-1/2", (Used On 19-Ft Model), Cap Screw; 5/8" X 3-1/2", (706 And 806), Cap Screw; (A: Not Used In U.S. And Canada) (B: Used On 4050e And 4250e Only) 5/8" X 3-1/2", Cap Screw; Ar 6-18(5/8"X3-1/2"), Cap Screw, Cap Screw; (A) 5/8"X4", Cap Screw; 5/8" X 3-1/2", (Without Markers), Cap Screw; 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", For 850, Cap Screw; 5/8" X 3-1/2", (Differential Lock), Cap Screw; 5/8" X 3-1/2" (For R64793), Cap Screw; 5/8" X 3-1/2", (Less Differential Lock), Cap Screw; (B) 5/8" X 3-1/2", Cap Screw; 15.875 X 88.900 mm (5/8" X 3-1/2"), Cap Screw; 5/8" X 3-1/2", (Use With R42332, R66649 Or R67903), Cap Screw; 5/8"X3-1/2", Cap Screw; 5/8" X 3-1/2" (Hs, Sae 8), Cap Screw; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8" X 3-1/2", Cap Screw; 5/8" X 3-1/2", (Use With (2) N135656), Cap Screw; (A: Not Used In U.S. And Canada) 5/8" X 3-1/2"	12
19***41	Cap Screw; 5/8" X 3-1/4" (Sae 8) (For R122201, R128399), Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8) (With Cab), Cap Screw; 5/8" X 3-1/4", (540 Or 1000 Rpm), Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8) (17 X 7 And 20 X 6 Disk) (9 X 14 And 12 X 10 Hoe), Cap Screw; 5/8" X 3-1/4", Cap Screw; 5/8" X 3-1/4" (Sae 8), For R122201, R128399, Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8) (4 Used, 53 Thru 59-Foot Machine), Cap Screw; (C) (D) (E) 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8), (For 25 Thru 27-Foot Models Only), Cap Screw; 5/8" X 3-1/4" 5/8"X3" (Sub For 19h1863), Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8 ), Cap Screw, Cap Screw; (B) 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; (A) 5/8" X 3-1/4" (Hs, Sae 8), Cap Screw; 15.875 X 82.550 mm, Cap Screw; 5/8" X 3-1/4" (Sub For 19h1863), Cap Screw; 15.875 X 82.550 mm (5/8" X 3-1/4"), Cap Screw; 5/8" X 2-3/4" (Sub For R64802 Appl), Cap Screw; (A) 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; 5/8" X 3-1/4" 15.875x76.200mm (Sub For 19h1863), Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8) (3 And 4 Unit), Cap Screw; 5/8" X 3-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 3-1/4" Hs, Sae 8, 5/8" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8" X 3-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8) (4-7 Ft., 8-11 Ft.), Cap Screw; 5/8" X 3-1/4", Hs, Sae 8, Cap Screw; 5/8" X 3-1/4", Cap Screw; 5/8" X 3-1/4", (Hs, Sae 8), Cap Screw; 5/8" X 3-1/4" Hs, Sae 8, Cap Screw; 5/8" X 3-1/4" Install Using Loctite 271 And Primer Torque (Lub) 160 Lb-Ft (215 N-M), Cap Screw; 5/8" X 3-1/4" (Sae 8), Cap Screw; 5/8"X2-3/4" (Sub For R64802 Appl), Cap Screw; 5/8" X 3-1/4" (Sae 8, For R122201, R128399), Cap Screw; 5/8"X3-1/4"	12

See all parts with full part numbers in Heavy Parts AI →

Wing Rockshaft

John Deere : 680 - Plow, Chisel : Wing Rockshaft

08***10	Bolt; (D: 12r38) 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (8 X 10 Frame), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), Use With 8”X10” Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12") 8, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2", Bolt; 5/8"X12-1/2", Bolt; (A) 8, (5/8"X12"), Bolt; 5/8" X 12-1/2" (Hs, Sae 8), 8"X10" Tube, Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8 (5/8"X12"), Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8.(5/8"X12"), Bolt; 5/8" X 12-1/2", Bolt; (A: Number Of Weights) 5/8" X 12-1/2" 8, Bolt; (D) (E) 5/8" X 12-1/2", Bolt; 5/8" X 12-1/2" U/W 8 X 10 Tube (Hs, Sae 8), Bolt; 5/8" X 12-1/2" Use With 8 X 10 Tube, (Hs, Sae 8), Bolt; 5/8" X 12-1/2" (U/W 8 X 10) Tube (Hs, Sae 8)	4
14***60	Nut; X 5/8", Nut; X 5/8", Nut; Ar 6-12(5/8"), Nut; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 5/16", Nut; 5/8" (Use With N141174), Nut; 5/8" (844,61*46-; 1243,62*77-), Nut; (5/8"), Nut, Nut; 5/8" Use Without Coulter, Nut; 5/8", Mp25 Generation Ii, Nut; 5/8" R.H., Nut; (A: For 360 Mower), Nut; (A: Rear) (B: Front) 5/8", Nut; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Nut; 5/8" (Use With (6) 19h3174 And (8) 19h3256), Nut; 5/8", 4 X 4 Frame, Nut; 5/8" (Sub 14h1039), Nut; (D) 5/8", Nut; 5/8", Hex., Nut; 5/8", (19.5l-24 Tire), Nut; (B: For 4 Weights) 5/8", Nut; (A) (B) (C) 5/8", Nut; (D: For 8 Weights) 5/8", Nut; 5/8" 21.5", Nut; (A: Used With 19', 22'4", 25'6", And 28'11" Rolling Baskets) 5/8", Nut; 15.875 mm (5/8"), Nut; 5/8" 36', Nut; 5/8" (19.5l-24 Tire), Nut; (A), Nut; 5/8"Unc, Nut; 5/8" 21'9", Nut; 5/8" (Sub For R139663, This Application ) (Use With R139661 Or 03h2078), Nut; 5/8" (Sub For R139663, This Application) (Use With R139661 Or 03h2078), Nut; 15.875 mm (5/8"), Nut; (C: For 6 Weights) 5/8", Nut; 5/8, Nut; 5/8" (930 Flex Arg), Nut; 5/8" (A), Nut; (Use With N141174), Nut; 5/8", Use With 420, 428, Or 430, Nut; (A) (B) 5/8", Nut; 5/8" (Sub For 14h263), Nut; (A) 5/8", Nut; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Nut; 5/8" 50 And 60ft, Nut; 5/8" Rh, Nut; (A: For 2 Weights) 5/8", Nut; 5/8" Vent, Nut; (A: Two Weights) 5/8", Nut; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Nut; 15.875 mm, Nut; 5/8" (Sub For H35925), Nut; 5/8", 5/8", Nut; (C) (D) 5/8", Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8", Nut; Lh, 5/8", Nut; 5/8", (1000rpm), Nut; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8"	8
14***73	Nut; 31.750 mm (1-1/4") Jam, Nut; 1-1/4", Nut, Nut; 1-1/4" (A), Nut; 1-1/4", Jam, Nut; (A: 12'-6" To 27'-6") 1-1/4", Nut; 1-1/4" Jam, Nut; 1-1/4", Nut; (A) 1-1/4", Nut; 1-1/4" Model 12w And 16n	3
19***44	Cap Screw; (A) 5/8"X2-1/4", Cap Screw; 5/8" X 2-1/4" (Sae 8) Up, Cap Screw; 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4" (Hs, Sae 8), Cap Screw; 5/8" X 2-1/4" (Hoe), Cap Screw; 5/8" X 2-1/4" Inner, Cap Screw, Cap Screw; 5/8" X 2-1/4" Hs, Sae 8, Cap Screw; 5/8" X 2-1/4" Hs=8 Sae, Cap Screw; (C) 5/8" X 2-1/4", Hs, Sae 8, Cap Screw; (J) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Sae 8) Up, Cap Screw; 5/8" X 2-1/4" (Rh Side), Cap Screw; 5/8" X 2-1/4", Up, Cap Screw; 5/8" X 2-1/4", Hs, Sae 8,, Cap Screw; 5/8" X 2-1/4" Hs 8 Sae, Cap Screw; 5/8" X 2-1/4", Hs, Sae 8, Cap Screw; 5/8"X2-1/4", Cap Screw; (C: Code 4402 Electronic Tach) 5/8" X 2-1/4", Cap Screw; 5/8" X 2-1/4", (Hs, Sae 8) (Use With 18.4-38, 20.8-34 Or 23.1-30 Tires), Cap Screw; 5/8" X 2-1/4", (Code 1405)	4

See all parts with full part numbers in Heavy Parts AI →

Wing Fold Hydraulics (11' Main Frame Drawn Flexible) ( - 2482)

John Deere : 680 - Plow, Chisel : Wing Fold Hydraulics (11' Main Frame Drawn Flexible) ( - 2482)

AA***09	Pressure Relief Valv; (16'5"-22'2"), Pressure Relief Valv; (Includes O-Ring R26448), Pressure Relief Valv; (Includes O-Ringr26448), Pressure Relief Valv, Pressure Relief Valv; Thermal, Pressure Relief Valv; 2-1/2" X 8", Pressure Relief Valv; Thermal Relief, Pressure Relief Valv; (A), Pressure Relief Valv; Thermal, (Includes R26448), Pressure Relief Valv; (Includes R26448) Thermal, Pressure Relief Valv; With O-Ring (4000 Psi)	1
AE***28	Elbow Fitting; (Sub Aa43396), Elbow Fitting; 90 Degrees, Elbow Fitting; 90 Degree 3/4" Female 0-Ring X 3/4" Male O-Ring, Elbow Fitting; 90°, Elbow Fitting; (A: Use With Filter Screen), Elbow Fitting; 90° (Use With Filter), Elbow Fitting; (Sub For Aw25268), Elbow Fitting; 90 Degree 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90-, Elbow Fitting, Elbow Fitting; (A), Elbow Fitting; 90° 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90 Degree, Elbow Fitting; 90º, Elbow Fitting; 90° (For Loaders Before Serial Number 3915) (For Loaders Before Serial Number 3915) 90°, Elbow Fitting; 90º (Sub For (1) Aw25268), Elbow Fitting; 90	2
AH***64	Elbow Fitting; Jam, Elbow Fitting; Used For Direct Connection To Valve, Elbow Fitting; (With Hydraulic Wagon), Elbow Fitting; (B: 8000 & 9000 Series Tractors), Elbow Fitting; (G: All Tractors), Elbow Fitting; 90 Degree Swivel, Elbow Fitting; No. 1 Cylinder Piston End To Port P1, Elbow Fitting; 90 Deg. (Sub For Mg248974), Elbow Fitting; 90° 3/4" Female Jic X 3/4" Male Jic, Elbow Fitting; (90 Degree), Elbow Fitting; 8-Row Wide, Elbow Fitting; 10- And 12- Row, Elbow Fitting; 90° Swivel, Elbow Fitting; 90° (Without Extendible Dipperstick), Elbow Fitting; (A) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting, Elbow Fitting; (Sub For Au43691), Elbow Fitting; 28', Elbow Fitting; 10 And 12- Row, Elbow Fitting; 90 Deg. (Sub For Mg248974) Adjustable, Elbow Fitting; 3/4" Jic Male X 3/4" Jic Swivel, Elbow Fitting; (90°) (213), Elbow Fitting; 90° (2 Used, Double Acting Cylinders) (Illustrated), Elbow Fitting; 90° 3/4" Mora To 3/4" Jicm, Elbow Fitting; 90°, Elbow Fitting; (2 Used, (A)) (Sub For Au43691), Elbow Fitting; (A) 90° 3/4" Jics To 3/4" Jicm, Elbow Fitting; (A), Elbow Fitting; Double Acting Valve Sections, Elbow Fitting; (Used For Direct Connection To Valve), Elbow Fitting; 90° 3/4" Jic Male X 3/4" Jic Female Swivel, Elbow Fitting; 90° (2 Used Roll-Gard Or Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (2 Used Roll-Gard And Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (Sub For Aa15480), Elbow Fitting; (Sub For At124775), Elbow Fitting; 3/4" Male Jic X 3/4" Female Jic Swivel, Elbow Fitting; 90 Degree, Elbow Fitting; (G), Elbow Fitting; (A) 90°, (Sub For Au43691), Elbow Fitting; (213), Elbow Fitting; 90°, (Without Extendible Dipperstick), Elbow Fitting; (A: 50 & 55 Series Tractors With Spool Type Remote Cylinder Control Valve) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting; (3/4" Male Jic X 3/4" Female Jic Swivel), Elbow Fitting; 90°, With Forage Wagon, Elbow Fitting; 36' And 44', Elbow Fitting; 90 °, Elbow Fitting; (Auger Swing Latch), Elbow Fitting; (For Tractors With Vertical Exhaust), Elbow Fitting; (C: Motor Return), Elbow Fitting; (A) (B) (C) (Used For Direct Connect To Valve), Elbow Fitting; 90 Degree, (Sub For Mg248974), Elbow Fitting; (B), Elbow Fitting; 90°, Swivel	2
AN***17	Hydraulic Hose; 1/4" X 44" (For 32 1/2', 35 1/2', 37 1/2', & 39 1/2' Machines), Hydraulic Hose; 9/16" X 1117 mm (44") X 9/16" To Ram Side Of L.H. Lift Fold Cylinder, Hydraulic Hose; 9/16" X 1117 mm (44") X 9/16" To Stationary Side Of L.H. Lift Fold Cylinder, Hydraulic Hose; 9/16" X 1117 mm X 9/16", Hydraulic Hose; 6.35 X 1118 mm (1/4 X 44"), Hydraulic Hose; 1/4" X 44" (For 32 1/2' Machines), Hydraulic Hose; 1/4" X 44" (For 27 1/2' Machines)	1

See all parts with full part numbers in Heavy Parts AI →

Wing Fold Hydraulics (11' Main Frame Drawn Flexible) (2483 - )

John Deere : 680 - Plow, Chisel : Wing Fold Hydraulics (11' Main Frame Drawn Flexible) (2483 - )

AA***09	Pressure Relief Valv; (16'5"-22'2"), Pressure Relief Valv; (Includes O-Ring R26448), Pressure Relief Valv; (Includes O-Ringr26448), Pressure Relief Valv, Pressure Relief Valv; Thermal, Pressure Relief Valv; 2-1/2" X 8", Pressure Relief Valv; Thermal Relief, Pressure Relief Valv; (A), Pressure Relief Valv; Thermal, (Includes R26448), Pressure Relief Valv; (Includes R26448) Thermal, Pressure Relief Valv; With O-Ring (4000 Psi)	1
AE***28	Elbow Fitting; (Sub Aa43396), Elbow Fitting; 90 Degrees, Elbow Fitting; 90 Degree 3/4" Female 0-Ring X 3/4" Male O-Ring, Elbow Fitting; 90°, Elbow Fitting; (A: Use With Filter Screen), Elbow Fitting; 90° (Use With Filter), Elbow Fitting; (Sub For Aw25268), Elbow Fitting; 90 Degree 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90-, Elbow Fitting, Elbow Fitting; (A), Elbow Fitting; 90° 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90 Degree, Elbow Fitting; 90º, Elbow Fitting; 90° (For Loaders Before Serial Number 3915) (For Loaders Before Serial Number 3915) 90°, Elbow Fitting; 90º (Sub For (1) Aw25268), Elbow Fitting; 90	2
AH***64	Elbow Fitting; Jam, Elbow Fitting; Used For Direct Connection To Valve, Elbow Fitting; (With Hydraulic Wagon), Elbow Fitting; (B: 8000 & 9000 Series Tractors), Elbow Fitting; (G: All Tractors), Elbow Fitting; 90 Degree Swivel, Elbow Fitting; No. 1 Cylinder Piston End To Port P1, Elbow Fitting; 90 Deg. (Sub For Mg248974), Elbow Fitting; 90° 3/4" Female Jic X 3/4" Male Jic, Elbow Fitting; (90 Degree), Elbow Fitting; 8-Row Wide, Elbow Fitting; 10- And 12- Row, Elbow Fitting; 90° Swivel, Elbow Fitting; 90° (Without Extendible Dipperstick), Elbow Fitting; (A) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting, Elbow Fitting; (Sub For Au43691), Elbow Fitting; 28', Elbow Fitting; 10 And 12- Row, Elbow Fitting; 90 Deg. (Sub For Mg248974) Adjustable, Elbow Fitting; 3/4" Jic Male X 3/4" Jic Swivel, Elbow Fitting; (90°) (213), Elbow Fitting; 90° (2 Used, Double Acting Cylinders) (Illustrated), Elbow Fitting; 90° 3/4" Mora To 3/4" Jicm, Elbow Fitting; 90°, Elbow Fitting; (2 Used, (A)) (Sub For Au43691), Elbow Fitting; (A) 90° 3/4" Jics To 3/4" Jicm, Elbow Fitting; (A), Elbow Fitting; Double Acting Valve Sections, Elbow Fitting; (Used For Direct Connection To Valve), Elbow Fitting; 90° 3/4" Jic Male X 3/4" Jic Female Swivel, Elbow Fitting; 90° (2 Used Roll-Gard Or Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (2 Used Roll-Gard And Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (Sub For Aa15480), Elbow Fitting; (Sub For At124775), Elbow Fitting; 3/4" Male Jic X 3/4" Female Jic Swivel, Elbow Fitting; 90 Degree, Elbow Fitting; (G), Elbow Fitting; (A) 90°, (Sub For Au43691), Elbow Fitting; (213), Elbow Fitting; 90°, (Without Extendible Dipperstick), Elbow Fitting; (A: 50 & 55 Series Tractors With Spool Type Remote Cylinder Control Valve) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting; (3/4" Male Jic X 3/4" Female Jic Swivel), Elbow Fitting; 90°, With Forage Wagon, Elbow Fitting; 36' And 44', Elbow Fitting; 90 °, Elbow Fitting; (Auger Swing Latch), Elbow Fitting; (For Tractors With Vertical Exhaust), Elbow Fitting; (C: Motor Return), Elbow Fitting; (A) (B) (C) (Used For Direct Connect To Valve), Elbow Fitting; 90 Degree, (Sub For Mg248974), Elbow Fitting; (B), Elbow Fitting; 90°, Swivel	2
AN***77	Hydraulic Hose; 3/8" X 1118 mm (44") X 3/4", Hydraulic Hose; 3/4" X 1117 mm X 3/4" (23'7"-26'5"), Hydraulic Hose; 3/4" X 1 118 mm (44") X 3/4", Hydraulic Hose; (A) 3/4" X 1 118 mm X 3/4", Hydraulic Hose; 3/4" X 1117 mm X 3/4" Port 9 To Wheel Cylinder No. 3 Rod Port, Hydraulic Hose; 3/4" X 1117 mm (44") X 3/4", Hydraulic Hose; (Sub An230284), Hydraulic Hose; (B) 3/4" X 1 118 mm (44") X 3/4", Hydraulic Hose; (A: 10' Mf, 6' Wing) (B: 10' Mf, 8' Wing) 3/4" X 6 731 mm X 3/4", Hydraulic Hose; (Sub For An230321), Hydraulic Hose, Hydraulic Hose; 3/8" X 1118 mm (44") X 3/4", (Sub For An230231), Hydraulic Hose; 3/4" X 1117 mm (44") X 3/4" (Sub For An230321), Hydraulic Hose; 3/4" X 1 118 mm (44") X 3/4", (Sub For An230321), Hydraulic Hose; 3/8" X 1118 mm (44") X 3/4", (Sub For An230321), Hydraulic Hose; 3/4" X 1117 mm X 3/4", Hydraulic Hose; (D) 3/4" X 1 118 mm (44") X 3/4", (Sub For An230321), Hydraulic Hose; 3/4" X 1117 mm X 3/4" Port 9 Wheel Cylinder No. 4 Rod Port, Hydraulic Hose; (B) 3/4" X 1 118 mm X 3/4", Hydraulic Hose; 3/4" X 1117 mm X 3/4" (Sub For Aa22316)	1

See all parts with full part numbers in Heavy Parts AI →

Wing Fold Hydraulics (13' Main Frame Drawn Flexible)

John Deere : 680 - Plow, Chisel : Wing Fold Hydraulics (13' Main Frame Drawn Flexible)

AA***09	Pressure Relief Valv; (16'5"-22'2"), Pressure Relief Valv; (Includes O-Ring R26448), Pressure Relief Valv; (Includes O-Ringr26448), Pressure Relief Valv, Pressure Relief Valv; Thermal, Pressure Relief Valv; 2-1/2" X 8", Pressure Relief Valv; Thermal Relief, Pressure Relief Valv; (A), Pressure Relief Valv; Thermal, (Includes R26448), Pressure Relief Valv; (Includes R26448) Thermal, Pressure Relief Valv; With O-Ring (4000 Psi)	1
AA***77	Hydraulic Hose; 1/2" X 26.5", Hydraulic Hose; (A: 12' Main Frame), Hydraulic Hose; (A: 10' Main Frame, 6' Wing) (B: 10' Main Frame, 8' Wing) (C: 12' Main Frame, 6' Wing) (D: 12' Main Frame, 8' Wing) (E: 12' Main Frame, 10' Wing) (F: 12' Main Frame, 12' Wing) (G: 15' Main Frame, 8' Wing) (H: 15' Main Frame, 10' Wing) (I: 15' Main Frame,, Hydraulic Hose; 3/4" X 673 mm (26-1/2") X 3/4", Hydraulic Hose, Hydraulic Hose; 3/4" X 673 mm (26-1/2") X 3/4" 1/2 X 26.5", Hydraulic Hose; 3/4" X 673 mm X 3/4" Level Lift, Hydraulic Hose; 3/4" X 673 mm X 3/4", Hydraulic Hose; 3/4" X 673 mm X 3/4" Level Lift Hitch	2
AE***28	Elbow Fitting; (Sub Aa43396), Elbow Fitting; 90 Degrees, Elbow Fitting; 90 Degree 3/4" Female 0-Ring X 3/4" Male O-Ring, Elbow Fitting; 90°, Elbow Fitting; (A: Use With Filter Screen), Elbow Fitting; 90° (Use With Filter), Elbow Fitting; (Sub For Aw25268), Elbow Fitting; 90 Degree 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90-, Elbow Fitting, Elbow Fitting; (A), Elbow Fitting; 90° 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90 Degree, Elbow Fitting; 90º, Elbow Fitting; 90° (For Loaders Before Serial Number 3915) (For Loaders Before Serial Number 3915) 90°, Elbow Fitting; 90º (Sub For (1) Aw25268), Elbow Fitting; 90	2
AH***64	Elbow Fitting; Jam, Elbow Fitting; Used For Direct Connection To Valve, Elbow Fitting; (With Hydraulic Wagon), Elbow Fitting; (B: 8000 & 9000 Series Tractors), Elbow Fitting; (G: All Tractors), Elbow Fitting; 90 Degree Swivel, Elbow Fitting; No. 1 Cylinder Piston End To Port P1, Elbow Fitting; 90 Deg. (Sub For Mg248974), Elbow Fitting; 90° 3/4" Female Jic X 3/4" Male Jic, Elbow Fitting; (90 Degree), Elbow Fitting; 8-Row Wide, Elbow Fitting; 10- And 12- Row, Elbow Fitting; 90° Swivel, Elbow Fitting; 90° (Without Extendible Dipperstick), Elbow Fitting; (A) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting, Elbow Fitting; (Sub For Au43691), Elbow Fitting; 28', Elbow Fitting; 10 And 12- Row, Elbow Fitting; 90 Deg. (Sub For Mg248974) Adjustable, Elbow Fitting; 3/4" Jic Male X 3/4" Jic Swivel, Elbow Fitting; (90°) (213), Elbow Fitting; 90° (2 Used, Double Acting Cylinders) (Illustrated), Elbow Fitting; 90° 3/4" Mora To 3/4" Jicm, Elbow Fitting; 90°, Elbow Fitting; (2 Used, (A)) (Sub For Au43691), Elbow Fitting; (A) 90° 3/4" Jics To 3/4" Jicm, Elbow Fitting; (A), Elbow Fitting; Double Acting Valve Sections, Elbow Fitting; (Used For Direct Connection To Valve), Elbow Fitting; 90° 3/4" Jic Male X 3/4" Jic Female Swivel, Elbow Fitting; 90° (2 Used Roll-Gard Or Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (2 Used Roll-Gard And Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (Sub For Aa15480), Elbow Fitting; (Sub For At124775), Elbow Fitting; 3/4" Male Jic X 3/4" Female Jic Swivel, Elbow Fitting; 90 Degree, Elbow Fitting; (G), Elbow Fitting; (A) 90°, (Sub For Au43691), Elbow Fitting; (213), Elbow Fitting; 90°, (Without Extendible Dipperstick), Elbow Fitting; (A: 50 & 55 Series Tractors With Spool Type Remote Cylinder Control Valve) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting; (3/4" Male Jic X 3/4" Female Jic Swivel), Elbow Fitting; 90°, With Forage Wagon, Elbow Fitting; 36' And 44', Elbow Fitting; 90 °, Elbow Fitting; (Auger Swing Latch), Elbow Fitting; (For Tractors With Vertical Exhaust), Elbow Fitting; (C: Motor Return), Elbow Fitting; (A) (B) (C) (Used For Direct Connect To Valve), Elbow Fitting; 90 Degree, (Sub For Mg248974), Elbow Fitting; (B), Elbow Fitting; 90°, Swivel	1

See all parts with full part numbers in Heavy Parts AI →

Xtra-Life™ Sweeps

John Deere : 680 - Plow, Chisel : Xtra-Life™ Sweeps

AN***18	Hardware Kit; 7/16" X 2-1/2" (Includes (50) 09h1761 Bolts (50) 14h813 Nuts And (50) 24m7180 Washers, Hardware Kit; 7/16" X 2-1/2" (Includes (50) 09h1761 Bolts, (50) 14h813 Nuts And (50) 24m7180 Washers), Hardware Kit; Fastener 7/16" X 2-1/2" (50 Bolts, Nuts, Washers), Hardware Kit; 7/16" X 2-1/2" (Includes (50) 09h1761 Bolts,(500) 14h813 Nuts And (50) 24m7180 Washers)	1
AN***20	Hardware Kit; 7/16" X 1-1/2" (Includes (50) 09h1765 Bolts) (50) 14h813 Nuts And (50) 24h1327 Washers, Hardware Kit; (7/16 X 1-1/2") Includes (50) 09h1765 Bolts, (50) 14h813 Nuts, Hardware Kit; 7/16" X 1-1/2" (Includes (50) 09h1765 Bolts, (50) 14h813 Nuts And (50) 24h1327 Washers), Hardware Kit; 7/16" X 1-1/2" (Includes(50) 09h1765 Bolts) (50) 14h813 Nuts And (50) 24h1327 Washers, Hardware Kit; 7/16" X 1-1/2" (Includes (50) 09h1765 Bolts,(50) 14h813 Nuts And(50) 24h1327 Washers)	1
AN***21	Hardware Kit; Fastener 5/8" X 1-1/2" (50 Bolts, Nuts, Washers), Hardware Kit; 5/8" X 1-1/2" (Includes (50) 03h1528 Bolts, (50) 14h760 Nuts And (50) 24h1139 Washers), Hardware Kit; 5/8" X 1-1/2" (Includes (50) 03h1528 Bolts (50) 14h760 Nuts And (50) 24h1139 Washers), Hardware Kit; 5/8" X 1-1/2" (Includes(50) 03h1528 Bolts, (50) 14h760 Nuts And (50) 24h1139 Washers), Hardware Kit; 5/8" X 1-1/2" (Includes (50) 03h1528 Bolts (50) 14h760 Nuts And(50) 24h1139 Washers)	1
AN***13	Bolt; Includes (50) N234753 Bolts, (50) 14h931 Nuts And (50) 24h1305 Washers, Bolt; (Includes (50) N234753, (50) 24h1305 And (50) 14h931) (Sub For An231498) Sweep Bolts, Bolt; (Sub For An182995 And An231498) Bolt, Nut And Washer, Bolt; (A: Box Of 50) (Includes 24h1305) (Sub For An182995 And An231498), Bolt; (Includes (50) N234753, (50) 24h1305 And (50) 14h931) (Sub For An182995 Or An231498), Bolt; With Nut And Washer (Box Of 50) (Sub For An181522, An182494, An182995 Or An231498), Bolt; (E: S-Tine Sweeps And Shovels) (F: Xtra-Lifetra-Life) Fastener 3/8" X 1-3/4" (50 Bolts, Nuts, Washers), Bolt; (D: Xtra-Life S-Tine Sweeps And Shovel) Includes (50) N234753 Bolts, (50) 14h931 Nuts And (50) (50) 24h1305 Washers, Bolt; (Includes (50) N234753, (50) 24h1305 And (50) 14h931), Bolt; (Includes (50) N234753, (50) 24h1305 And (50) 14h931) (Sub For Ca15910, An182995 Or An231498), Bolt; 3/8 X 1-1/2", With Nut And Washer (Box Of 50) (Sub For An182995 Or An231498), Bolt; Includes (50) N234753 Bolts, (50) 14h931 Nuts And(50) 24h1305 Washers, Bolt; (Includes (50) N234753 Bolts, (50) 14h931 Nuts And (50) 24h1305 Washers)	1

See all parts with full part numbers in Heavy Parts AI →

Need a specific 680 - PLOW, CHISEL part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.