John Deerefront loader(no series)
John Deere 640A - FRONT LOADER
OEM parts breakdown
Post a parts request and compare supplier quotes.
The John Deere 640A is a front loader covered by the official PC3204 parts catalog manual.
640A - FRONT LOADER common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 32243 | Plug | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
All 640A - FRONT LOADER assemblies by section
Every catalogued assembly group for the John Deere 640A - FRONT LOADER. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
100 Front Equipments
John Deere : 640a - Front Loader : 100 Front Equipments : Bucket Level Indicator (Nsl) [D10]
| AW***83 | Rod | 1 |
| AW***84 | Tube | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Bucket Level Indicator [D09]
| AR***36 | Clamp; (Sub For Ty22473), Clamp; (Sub For W40933) (Appl), Clamp; (Included In Al37357 Or Al39934), Clamp; (Sub Ty22473), Clamp, Clamp; 3", Clamp; (Sub For Ar21999, This Application), Clamp; (Sub For Ar48502), Clamp; (Use With At78056), Clamp; (Sub For Ar21999), Clamp; (Sub For 45***12) | 2 |
| AW***85 | Bucket Level Indicat | 1 |
| W3***80 | Snap Ring; (Sub For W29042), Snap Ring | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Heavy Duty Materials Bucket (2000mm) [C07]
| 10***36 | Bolt; 1/2" X 2-1/4", (Hs Sae 8), Bolt; (B) (C) 0,5" X 2,25", Bolt, Bolt; 1/2" X 2-1/4", Hs Sae8, Bolt; 1/2" X 2-1/4" (Used With Sweeps), Bolt; (B: For Msl) 1/2" X 2-1/4", Bolt; (B) (C) M12,7 X 57,15, Bolt; (A) (B) 1/2" X 2-1/4", Bolt; 1/2" X 2-1/4", Hs Sae 8, (Sub For 10h1076), Bolt; 1/2" X 2-1/4", 2150mm, Bolt; 0,5" X 2,25", Bolt; 1/2" X 2-1/4" (Hs, Sae 8), Bolt; 1/2" X 2-1/4" (Hs, Sae 8) (Used With Sweeps), Bolt; 1/2" X 2-1/4", Hs Sae 8, Bolt; 1/2" X 2-1/4", Bolt; 1/2"X2-1/4", Bolt; (B) 0,5" X 2,25", Bolt; 12.700 X 57.150 mm, Bolt; (B: For Msl) (C: For Nsl) 1/2" X 2-1/4", Bolt; (B) M12,7 X 57,15, Bolt; 1/2" X 2-1/4" (For Use With Sweeps) | 15 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 15 |
| 14***99 | Nut; M12 (Sub For A31867 This Application), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; (A: For 9650 (70***01-) & 9750 (70***01-)) M12, Flange Nut; (Use With 135 Amp), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: For 9650 (-69***95) & 9750 (-69***24)) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn All) M12, Nut; (A: For 9650 (69***96-) & 9750 (69***25-)) M12, Nut; M12 (Fine Cut Conversion), Nut; M12 (132"), Nut; (J: Without Liquid Fertilizer) M12, Nut; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Saran (Cd) Esn 52***16-) (B: Dubuque (To) Esn 74***90-) M12, Nut; M12 (For Dc41181), Nut; M12 (Low R.H.), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (B: Cab W/O Mechanical Front Wheel Drive) M12, Nut; (A: Only For 2, 0 M Hiflow Pickup) M12, Nut; M12 (Use With Ah207294), Nut; M12 (Lower Rh), Nut; (B) M12 (For Lgth = 1600 mm (62,9")), Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (B: Flight) M12, Nut; (A) (B: Dubuque (To) Esn 71***69- 74***89), Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: From Sr.No.5310s(00***84-), 5410(00***19-), 5610(00***01-).) M12, Nut; M12 (For Use With 4th And 5th Scv Kit, Lv150130), Nut; (B: Dubuque (T0) Esn 72***12) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -74***89) (E: Saran (Cd) Esn -52***26) M12, Nut; (B: Dubuque (T0) Esn Xxxxxx-72***11) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) M12, Nut; M12, When Mounted On Frame, Nut; (C: High Capacity) M12, Nut; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M12 M12, Nut; (A: For 9650 (70***01-) & 9750 (70***01-)) M12, Nut; M12 (For Lgth = 1600 mm (62,9")), Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M12, Nut; (B: Dubuque (T0) Esn 72***12) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -74***89) (E: Saran (Cd) Esn -52***92) M12, Nut; (A: Isolated Open Operator Station) (C: Cab With Mechanical Front Wheel Drive) M12, Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -53***64) M12, Nut; M12 (B), Nut; M12, (Use With Aw23160 Or Aw25451), Nut; M12 2112c Only, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Use With W38632) On 1750, 4, 6, And 8 Row, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; (A: Use With Two-Rank Machine, 60, 000 Lb. Safety Chain Attachment) M12, Nut; M12 (Use With Ah148279), Nut; M12 M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Flange Nut; M12, (High Ambient), Nut; (A: -Xxxxxx (9550, -69***29)(9550sh, -69***17)) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; M12 (B) (914), Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: 9550 (69***01-) 9550sh (69***01-)) M12, Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M12, Nut; M12, (Option 9701), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (A: Dubuque (T0) Esn -74***89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) M12, Nut; M12 (Use With Toolbox Mount With Front Weights Or Loader), Nut; (A: Saran (Cd) Esn Xxxxxx-) (B: Dubuque (T0) Esn 72***12-) (C: Saran (Cd) Esn -52***15) (D: Dubuque (T0) Esn -74***89) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Dubuque (To) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn Xxxxxx-) (B: Dubuque (T0) Esn -72***11) M12, Nut; (B: Cab Without Mechanical Front Wheel Drive) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***26) M12, Flange Nut; M12, (Standard), Nut; (B: Dubuque (T0) Esn Xxxxxx) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -72***11) (E: Saran (Cd) Esn -Xxxxxx) M12, Nut; (B) M12 (For Lgth = 1600 mm(62,9")), Nut; M12 (Sub (2) 19m7791, (2) E12335 And (2) R273534, This Application), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (To) Esn -74***89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (A: 9550 (69***01-) 9550sh (96***01-)) M12, Nut; (A) (B) M12, Nut; (A: Dubuque (T0) Esn 71***69-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (B: Dubuque (To) Esn -74***89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (Includes Re500778), Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; M12 (Use With Aw23160 Or Aw25451), Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn 51***31) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; (A: Use With Tow-Behind Cart) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (For Dc41481), Nut; M12 Tk=1mm, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Not Used On 1780), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: 9550 (70***01-) 9550sh (70***01-)) M12, Nut; (B) M12 (For Lgth = 2400 mm (94,4")), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Use With Ah166327), Nut; (A: Used With Double Twine Arm.) M12, Nut; (C) (D) (F) M12, Nut; (A: For Rotor-Type Pickup) M12, Nut; (B) (C) M12 (For Lgth = 1600 mm (62,9")), Nut; M12 (Use With Frame Or Hood Guard Mounted Toolbox), Nut; M12, Nut; (A: W/ Power Take-Off) M12, Nut; (A: For 9650 (-70***00) & 9750 (-70***00)) M12, Nut; (A), Nut; (B: For Msl) M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn Xxxxxx-72***11) M12, Nut; M12, For Transmission, Nut; (A: For 1, 81 Meter Pickup) M12, Nut; (A: Used With Tow-Between Cart) M12, Nut; M12 Rh, Nut; M12, R.H., Nut; (C) (D) M12, Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M12, Nut; M12 (Lower Rh), Nut; M12 (Use With H208429), Nut; (E) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; M12 (For Dc35502, Dc41100, Dc54697), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: Dubuque (To) Esn 72***12-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M12, Nut; M12, For Transmission (30" And 36" Row Spacing), Nut; (B: Dubuque (T0) Esn -74***89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (A: With Sound Gard Body) M12, Nut; (B: Used With Tow-Behind Cart) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: (6068hn053)) M12, Nut; (B: For Msl) (C: For Nsl) M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: (6068hn056)) M12, Nut; (A: For 25 Knives Only) M12, Nut; (A: Saran (Cd) Esn 52***16-) (B: Dubuque (T0) Esn 74***90-) M12, Nut; (C: Sound-Gard Body) M12, Nut; M12 (Use With W38632)On 1750, 4, 6, And 8 Row, Nut; (A: Dubuque (To) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (To) Esn Xxxxxx-) (B: Dubuque (To) Esn -72***11) M12, Nut; M12 (For Dc47713), Nut; (A: Extra Heavy Duty) M12, Nut; (B) (C) M12 (For Lgth = 1600 mm(62,9")), Nut, Nut; M12, (Use With H161599), Nut; M12 M16 X 210, Nut; (A: For 5e Series Tractors) M12 Lh, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Saran (Cd) Esn -52***92) (B: Dubuque (T0) Esn -74***89) M12, Nut; (A: Dubuque (To) Esn 71***69-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (C: Regular) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (To) Esn Xxxxxx-72***11) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) M12, Nut; M12 (110" And 132"), Nut; (A: Cab W/Mechanical Front Wheel Drive) (C: Isolated Open Operator Station) M12, Nut; M12 L.H., Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Wide Fender) M12, Nut; M12 (Use With Ah162724 Or Ah145282), Nut; M12 (Use With H202011 Or H202009), Nut; (I: When Mounted On Marker Mast) M12, Nut; (A) (B) (C) (D) M12, Nut; (B) M12 (For Lgth = 2000 mm (78,7")), Nut; (B) M12, Nut; (B: For Msl) M12 (For 2000 mm), Nut; M12 (Center), Nut; M12 (Use With Ah162724 Or Ah207294), Nut; (C) M12, Nut; (A: For Ballast Attachment) M12 For Ballast Attachment, Nut; M12 (E), Nut; M12 Lh, Rh, Nut; (A) M12, Nut; (A: Dubuque (To) Esn 72***12-) (B: Saran (Cd) Esn 51***31-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; M12 (Used On Frames W/O Weld Nuts), Nut; M12 When Mounted On Frame, Nut; M12 (Use With H161599), Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (A: For 14 Knives Only) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Hi Capacity) M12, Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: With Cab) M12, Flange Nut; (K) M12, Nut; (A: Starting From Series Number 625 (06***44-), 630 (06***34-)) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) (B: Dubuque (T0) Esn -72***11) M12, Nut; M12, (Sub For Et11505), Nut; M12, Flange, Nut; M12 (45, 60), Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; (A: Only For 2.0 M Hiflow Pickup) M12, Nut; (A: For 1, 81 M Pickup And 2, 20 M Hiflow Pickup) (B: For Precutter) (C: For 2, 00 Meter Pickup Hiflow) M12, Nut; (B: With Precutter) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (B) (C) (D), Nut; M12 Marker Mast Mounted, Nut; M12 (A) (B), Nut; (D) M12, Nut; M12, (Use With Ah162724 Or Ah145282), Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: For Msl) M12 (For 2400 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; M12 4" (630), Nut; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12, Nut; (A: Dubuque (T0) Esn -74***89) (B: Saran (Cd) Esn -52***92) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; M12 (Includes Re500778), Nut; (A: Conversion Kit, Rotary To Auger) M12, Nut; M12 When Mounted On Marker Mast, Nut; M12, When Mounted On Marker Mast, Nut; (A: Dubuque (T0) Esn -70***94) (B: Saran (Cd) Esn -Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (F: (Xxxxxx-) 8100-02***31; 8200-02***32; 8300-02***59; 8400-02***33) M12, Nut; (C: Up To Series 622 (-08***61), 625 (-08***97), 630 (-08***54)) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -55***82) M12, Flange Nut; M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (To) Esn -74***89) (B: Saran (Cd) Esn -52***92) M12, Nut; (A: Saran (Cd) Esn Xxxxxx-) (B: Dubuque (To) Esn 72***12-) (C: Saran (Cd) Esn -52***15) (D: Dubuque (To) Esn -74***89) M12, Nut; M12 (Sub For A31867), Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -53***64) M12, Nut; M12 Frame Mounted, Nut; M12, (Sub (2) 19m7791, (2) E12335 And (2) R273534, This Application), Nut; (A: For 2, 20 Meter Pickup) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn 51***31-52***92) M12 (Option 9701), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Up To Series 625 (-06***43), 630 (-06***33)) M12, Nut; (C: Lower Right Hand) M12, Nut; (E: (-Xxxxxx) 8100-02***30; 8200-02***31; 8300-02***58; 8400-02***32) M12, Nut; M12, (Use With Ah207294), Nut; (A: Included In Ae48634) M12, Nut; (A: Isolated Open Operator Station) (C: Cab W/Mechanical Front Wheel Drive) M12, Nut; (A: Only For 1.8 M Pickup) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn 72***12-) (B: Saran (Cd) Esn 51***31-) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12, Nut; M12 (A), Nut; (A: For Prodrive) M12, Nut; (A: Use Only For Kernel Processor Quick Conversion) M12, Flange Nut, Nut; M12, (Use With Ah145282 Or Ah162724), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) M12, Nut; M12, M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) (C: Torreon (Pe) Esn Xxxxxx-53***64) M12, Nut; (A: Cab With Mechanical Front Wheel Drive) (C: Isolated Open Operator Station) M12, Nut; M12 (Not Used With Field Installed Loader Backhoe), Nut; (A: W/O Second Curtain) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; M12, Rh, Nut; (H: When Mounted On Frame) M12, Nut; (C: Up To Series 2111 (-13425), 2113 (-13421), 2115 (-13405)) (D: Up To Series 2117 (-13415), 2122 (-13423), 2126 (-06***05)) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: (618/620) Rigid) M12, Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; M12 (Use With Ah162724), Nut; M12 Lh, Nut; M12 Tow-Behind, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12 | 8 |
John Deere : 640a - Front Loader : 100 Front Equipments : Materials Bucket [C06]
| 10***36 | Bolt; 1/2" X 2-1/4", (Hs Sae 8), Bolt; (B) (C) 0,5" X 2,25", Bolt, Bolt; 1/2" X 2-1/4", Hs Sae8, Bolt; 1/2" X 2-1/4" (Used With Sweeps), Bolt; (B: For Msl) 1/2" X 2-1/4", Bolt; (B) (C) M12,7 X 57,15, Bolt; (A) (B) 1/2" X 2-1/4", Bolt; 1/2" X 2-1/4", Hs Sae 8, (Sub For 10h1076), Bolt; 1/2" X 2-1/4", 2150mm, Bolt; 0,5" X 2,25", Bolt; 1/2" X 2-1/4" (Hs, Sae 8), Bolt; 1/2" X 2-1/4" (Hs, Sae 8) (Used With Sweeps), Bolt; 1/2" X 2-1/4", Hs Sae 8, Bolt; 1/2" X 2-1/4", Bolt; 1/2"X2-1/4", Bolt; (B) 0,5" X 2,25", Bolt; 12.700 X 57.150 mm, Bolt; (B: For Msl) (C: For Nsl) 1/2" X 2-1/4", Bolt; (B) M12,7 X 57,15, Bolt; 1/2" X 2-1/4" (For Use With Sweeps) | 15 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 15 |
| W4***74 | Cutting Edge; (E), Cutting Edge; (Order Bw14763), Cutting Edge; (C), Cutting Edge; (A: Weld On) 2450 mm, Cutting Edge; (B) 2000 mm(79")2150 mm(85")2300 mm(90")2450(96") (Sub For W42624) (Cut To Length), Cutting Edge; (Sub For W42624) (Cut To Length), Cutting Edge; (B) (C) (K) (J), Cutting Edge; For 2300 mm 90", Cutting Edge; (D) (Use With Bw14267), Cutting Edge; 2300 mm (90") (Sub For W42625), Cutting Edge; (B) (C) (E), Cutting Edge; (B) 2450 mm (96") (Sub For W42624), Cutting Edge; Cut To Length, Cutting Edge; (B) 2000 mm (79")2300 mm(90")2450 mm(96") (Sub For W42624) (Cut To Length), Cutting Edge; (Order Bw14763) 2150 mm (85") Complete Goods/Ship Bundle, Cutting Edge; (A) Lgth = 2000 mm (79"), Cutting Edge; (A) Lgth = 2300 mm (90"), Cutting Edge; (B) (I) 2450 mm (96") (Sub For W42624), Cutting Edge; (A) | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Pallet Fork And Tines [C08]
| 19***67 | Bolt; M10x25, Lh, Bolt; M10 X 25 (Sub For 19m7099), Bolt; (A: Order By Tractor Serial Number Only) (B: ( -00***46, 2148, 2149, 2151-2157, 2159-2166, 2168-2174, 2184-5466)) M10 X 25, Bolt; (B: W/O Cab) (E: ( -Xxxxxx) 7600-00***64; 7700-00***58; 7800-00***04) M10 X 25, Bolt; (B: (Xxxxxx- ) 8100-01***72; 8200-01***38; 8300-01***15; 8400-01***21) M10 X 25, Bolt; (B: With Rops) M10 X 25 (Sub For Er020851, Appl), Bolt; (B: (Xxxxxx- ) 4050-00***26; 4250-01***46; 4450-02***19) M10 X 25, Bolt; M10x35, Bolt; M10 X 25 2 Pinion Differential, Bolt; (B: Hx - 4 Bolt Pattern) (C: 26"X9"X14.5"-24pr Severe Duty Ag Tire) (E: 21"X7"X12"-16pr Severe Duty Ag Tire) M10 X 25, Bolt; (B: (Xxxxxx- ) 8560-00***01; 8760-00***01; 8960-00***01) M10 X 25 (24-Speed Powrsync), Bolt; M10 X 25 (Hs=10.9), Bolt; (B: (Xxxxxx- ) 4050-00***26; 4250-01***46; 4450-02***19) M10 X 25, Bolt; (A) M10 X 25 (Set Of 2), Bolt; (D: 21" X 7" X 12" 16pr Tire) M10 X 25, Bolt; (A: From Sr.No. 5103s(01***67- ), 5104(01***62- ), 5204(00***15- )) M10 X 25, Bolt; M10 X 25 Hs=10.9, Cap Screw; M10 X 25, Bolt; M10 X 25 M10 X 25 (Hi-Crop), Bolt; M10 X 25 (For Al110920), Bolt; M10x, Bolt; M10x25 L.H., Bolt; M10 X 25, Plate To Frame, Bolt; (A: Rice Version) M10 X 25, Bolt; (A: Without Mid Scv) M10 X 25, Bolt; 10 X 25 mm, Bolt; (A) M10x25, Bolt; (A: Mechanical Front Wheel Drive) M10 X 25 (Hs, Head Marked 10.9), Bolt, Bolt; M10 X 25, M10x25, Bolt; M10 X 25 (Sub For Er020851 Appl), Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M10 X 25 2130, Bolt; M10 X 25 mm, Bolt; M10 X 30, Bolt; (A) M10 X 25, Bolt; M10x95, Bolt; 10x25mm, Bolt; (C: Hi-Clearance) M10 X 25, Bolt; M10 X 25 28 For 13, 15', 40 For 18, 20, 22', 52 For 25, 30', Bolt; (B: (Xxxxxx- ) 4650-01***10; 4850-01***33) M10 X 25, Cap Screw; M10 X 25, (Sub For Ffsb108726), Bolt; (B: 21"X7"X12"-16pr Severe Duty Ag Tire) M10 X 25, Bolt; (A: (Xxxxxx- ) 4055-01***01; 4255-01***01; 4455-02***01) M10 X 25, Bolt; M10x25, Bolt; M10 X25, Bolt; M10 X 25, L.H., Bolt; M10 X 25, (Use With Aw20511), Bolt; M10 X 25, (312), Bolt; (H: 21" X 7" X 12" 16pr Tire) M10 X 25, Bolt; M10 X 25, Lh, Bolt; M10 X 25 (Sub For 19m7042), Bolt; M10 X 25 (Sub For 19m7402), Bolt; M10 X 25, (312) M10 X 25, Bolt; M10 X 25 (Hi-Crop), Bolt; M10 X 25 (Hs 10.9), Bolt; (A) M10 X 25 (Sub For 19m7402), Bolt; M10 X 25 (Hs, Head Marked 10.9), Bolt; M10x30, Bolt; (A: With Front Loader Only) M10 X 25 M10x25, Bolt; (A: For Tractor With 2 Steps, On The Left And On The Right) M10 X 25, Bolt; M10 X 35, Bolt; (A: Alternative For Part 13) M10 X 25 (Sub For Er021770 Appl), Bolt; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M10 X 25, Bolt; M10, Bolt; M10 X 25 (For Al119373), Bolt; M10 X 25 Rear, Bolt; M20x25, Bolt; M10 X 25 (Sub For T105891, This Application), Bolt; (B: W/O Cab) M10 X 25, Bolt; (A: With Front Loader Only) M10 X 25, Cap Screw; M10 X 25, (Sub For Ffsb108728), Bolt; M10 X 25 M10x25, Bolt; M10 X 25, M10 X 25mm, Bolt; M10 X 25 38-Inch Row Spacing Only, Bolt; M10 X 25 (Sub For Er021770 Appl), Bolt; M10 X 25, Full Thread, (Use With Ar92109), Bolt; M10 X 25 M10 X 25, Bolt; (A: Without Cab) M10 X 25, Bolt; (A: For Tractor With 3 Steps, On The Left And On The Right) M10 X 25, Bolt; M10 X 25 (A), Bolt; M10 X 25, Cap Screw; (Sub For Ffsb108726), Bolt; 10x25mm., Bolt; M10 X 25, (312) M10x25, Bolt; M10 X 25 (Use With U15939), Bolt; 10x25mm (Sub For 19m7402), Bolt; M10 X 25, Z = 20, Bolt; M10 X 25 Hs 10.9, Bolt; (B) M10 X 25, Bolt; M16 X 25, Bolt; M10 X 25 (Sub For Er127922 Appl), Bolt; M12x25, Bolt; (A: From Sr.No. 5038d(00***62- )) M10 X 25, Bolt; M10x20, Bolt; (B: Without Cab) M10 X 25, Bolt; M10 X 25 36-Inch Row Spacing Only, Bolt; (A: Cx - 5 Bolt Pattern) (B: Hx - 4 Bolt Pattern) (C: 21"X7"X12"-16pr Severe Duty Ag Tire) M10 X 25, Bolt; Ar, M10 X 25, Bolt; (A: (Xxxxxx- ) 8100-01***72; 8200-01***38; 8300-01***15; 8400-01***21) M10 X 25, Bolt; M10 X 25, M10 X 25 | 2 |
| 34***51 | Spring Pin; 8 X 60 mm (Sub For 34m3879), Spring Pin; 8x60mm, Spring Pin; 8 X 60 mm, Spring Pin, Spring Pin; (A: With Net Wrapping) 8 X 60 mm, Spring Pin; M8x60 | 2 |
| AW***38 | Tine | 2 |
John Deere : 640a - Front Loader : 100 Front Equipments : Quik-Change Attachment Latches [D11]
| 03***06 | Bolt; M16x35, Bolt; M16 X 35, Bolt; (A) M16 X 35, Bolt; (A: Starting From Series Number 625 (06***44- ), 630 (06***34- )) M16 X 35, Bolt; M16 X 35 (A) | 4 |
| 14***91 | Nut; (A: For John Deere Axles) M16, Nut; (B: Xxxxxx- (9550, 69***30-)(9550sh, 69***18-)) M16, Nut; M16 North America, (Sub For E63528), Nut; (A: Heavy Duty) M16, Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M16, Nut; (B) M16, Nut; (A: For 6d T3 Tractor) M16, Nut; (A: Extra Heavy Duty) M16, Nut; (A: With Rotor-Type Pickup) M16, Nut; (A: Without The Largest Diameter Starter Roll) M16, Nut; M16 (Use With Toolbox Mount With Front Weights Or Loader), Nut; M16 M16, Nut; (A: United States And Canada) (D: Without Roll-Gard) M16 (2840, 2940, 2950, 2955, 3130, 3140, 3650), Nut; (A: Conversion Kit, Rotary To Auger) M16, Nut; (A: Only For Argos (8r Ivt And Pst)) M16, Nut; M16 Tow-Between, Nut; M16 (Sub For A31869, This Application), Nut; M16 (Also Ord 24m7241) (Use W21684 Special Washer Under Each 14m7291 Flange Nut), Nut; (B: All-Run And Primary Only Systems (Master Controller)) M16, Nut; (A: For 575 With Pick Up W/O Precutter) M16, Nut; (A: Included In Ae48634) M16, Nut; M16, Nut; (A: Starting From Series Number 625 (06***44-), 630 (06***34-)) M16, Nut; (A: For Dual Speed Straw Chopper Drive) M16, Nut; (F: United Kingdom, France, Germany And Sweden) M16, Nut; M16 (Use With H214618), Nut; (A: For Pickup 2, 20 M) (B: With Net Wrapping) M16, Nut; M16 Lh, Rh, Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M16, Nut; M16 (Sub For E63528), Nut; M16 (A) (European), Nut; M16, M16, Nut; (A), Nut; (C) (D) M16, Nut; M16 Europe, (Sub For E63528), Nut; (D: Note; (71***06-) Tow-Between (71***79-) Tow-Behind) M16, Nut; (C: Note; (-71***05) Tow-Between (-71***78) Tow-Behind) M16, Nut; (A) M16, Nut; (A) (B) M16, Nut; M16 (A), Nut; (C) M16, (2840, 2940, 2950, 2955, 3130, 3140), Nut; (A: For John Deere Axles) M16, Nut; M16, (Use With H214618), Nut; (A: For Pickup 2,20 M) (B: With Net Coveredge) M16, Nut; M16 Flange, Nut; (A: 9550 (69***01-) 9550sh (69***01-)) M16, Nut; (A: With The Largest Diameter Starter Roll) M16, Flange Nut; M16, Nut; (A: For Machines Prior To 01 June 96) M16, Nut; (I) (J) M16, Nut; M16 (Optional), Nut; M16, (Sub For E63528), Nut; M16 (A) (B), Nut; (A: High Unloading Rate) M16, Nut, Nut; (D: For Lateral Tilt) M16, Nut; M16, (Used On 2840, 2940, 2950, 2955, 3130 And 3140 Tractors Without Roll-Gard In United States And Canada), Nut; (A: Up To Series 625 (-06***43), 630 (-06***33)) M16, Nut; M10, Nut; (C: Primary Only System (Slave Controllers)) M16 | 4 |
| 34***49 | Spring Pin; 8 X 50 mm, Spring Pin; M8 X 50, Spring Pin; 8 X 50 mm Lh, Rh, Spring Pin; (C: For Adaption Gripper Bucket) 8 X 50 mm, Spring Pin; (B: For Adaptation Gripper-Bucket) 8 X 50 mm, Spring Pin; (B: For Adaptation Gripper Bucket) 8 X 50 mm, Spring Pin; (B) 8 X 50 mm, Spring Pin; (C) 8 X 50 mm, Spring Pin; (A: Only For 2.0 M Hiflow Pickup) 8 X 50 mm, Spring Pin; 8 X 50, Spring Pin; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) 8 X 50 mm, Spring Pin; 8 X 50 mm (Sub For Cc51316), Spring Pin; (A: Only For 2, 0 M Hiflow Pickup) 8 X 50 mm, Spring Pin; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) 8 X 50 mm, Spring Pin; (A: For 1, 81 M Pickup And 2, 20 M Hiflow Pickup) (C: For 2, 00 Meter Pickup Hiflow) 8 X 50 mm, Spring Pin, Spring Pin; 8x50mm, Spring Pin; 8 X 50 mm Sub For 34m7048, Spring Pin; (A) 8x50mm, Spring Pin; 8 X 50 mm Rh, Spring Pin; (A: For Msl) 8 X 50 mm, Spring Pin; 8 X 50 mm 8x50, Spring Pin; (A: For 2, 00 Meter Pickup Hiflow) 8 X 50 mm, Spring Pin; (C: For Adaptation Gripper-Bucket) 8 X 50 mm, Spring Pin; (A) 8 X 50 mm, Spring Pin; (A: For Adaptation Gripper Bucket) 8 X 50 mm, Spring Pin; 8 X 50 mm 8x50 mm, Spring Pin; (A: Only For 1.8 M Pickup) 8 X 50 mm, Spring Pin; (A: For Adaptation Gripper-Bucket) 8 X 50 mm, Spring Pin; 8 X 50 mm (Sub For 34m3877) | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Round Bale Gripper With Elevator (Lifting Height 2500 Mm) [D22]
| 14***40 | Nut; M10 |, Nut; M8 (Sub For 14m7137), Nut; M16, Nut; 10mm, Nut; (Sub For 14m7039), Nut; M8, Nut; 10mm (Sub For 14m7039), Nut; M10, (312) M10, Nut; 10 mm, Nut; M10, 3,2x20mm, Nut; (C) M10, Nut; Ar, 10mm, Nut; M10, (312), Nut; (A: For Rice) M10, Nut; M10, Nut; (B) 8 mm, Nut; Ar, M10, Nut; M10 (Ord W/Sb12585100/0), Nut; M10, M10x25, Nut; 12mm, Nut; (D: Components Of Item Dq73362) M10, Nut; M10 (Sub For 14m7273), Nut; M10 Lh, Nut; (A: Rice Version) M10, Nut; (A: W/ Lateral Tilt) M10, Nut, Nut; (A) M8, Nut; M10, M10, Nut; M10, M12x30, Nut; M10, 11x21x2mm, Nut; M10 (Sub For 14m7039), Nut; (A: Rice) M10, Nut; (A) 10mm, Nut; (A) M10, Nut; M10x50, Nut; M10 M10, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10, Nut; 10x1,5mm, Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M10, Nut; (A: No Longer Required) M10, Nut; (B) M10 | 0 |
| 34***88 | Spring Pin; (A), Spring Pin; 7.925 X 44.450 mm (5/16" X 1-3/4"), Spring Pin; 5/16"X1-3/4", Spring Pin; 5/16" X 1-3/4", Spring Pin; 5/16" X 1-3/4" (Sub For 11h255), Spring Pin; 5/16" X 1-3/4", Dry Or Liquid Hill-Drop Only, Spring Pin; (A) 5/16" X 1-3/4", Spring Pin, Spring Pin; 0,312" X 1,75", Spring Pin; 7,9 X 44,45 mm | 8 |
| 34***43 | Spring Pin; 0.236" X 1.772", Spring Pin; 6 X 45 mm, Spring Pin, Spring Pin; (312), Spring Pin; (A: Option) 6 X 45 mm, Spring Pin; 6 X 45 mm (Sub For 34m7253), Spring Pin; 6x45mm, Spring Pin; (312) 6x45mm, Spring Pin; (A) 6 X 45mm, Spring Pin; (A) 6 X 5mm, Spring Pin; (A) 6 X 45 mm, Spring Pin; (A) 6x45mm, Spring Pin; 6 X 45 mm (Sub For 34m7043), Spring Pin; 6 X 45 mm (A), Spring Pin; 6 X 45mm | 0 |
John Deere : 640a - Front Loader : 100 Front Equipments : Round Bale Gripper With Elevator [D18]
| 14***40 | Nut; M10 |, Nut; M8 (Sub For 14m7137), Nut; M16, Nut; 10mm, Nut; (Sub For 14m7039), Nut; M8, Nut; 10mm (Sub For 14m7039), Nut; M10, (312) M10, Nut; 10 mm, Nut; M10, 3,2x20mm, Nut; (C) M10, Nut; Ar, 10mm, Nut; M10, (312), Nut; (A: For Rice) M10, Nut; M10, Nut; (B) 8 mm, Nut; Ar, M10, Nut; M10 (Ord W/Sb12585100/0), Nut; M10, M10x25, Nut; 12mm, Nut; (D: Components Of Item Dq73362) M10, Nut; M10 (Sub For 14m7273), Nut; M10 Lh, Nut; (A: Rice Version) M10, Nut; (A: W/ Lateral Tilt) M10, Nut, Nut; (A) M8, Nut; M10, M10, Nut; M10, M12x30, Nut; M10, 11x21x2mm, Nut; M10 (Sub For 14m7039), Nut; (A: Rice) M10, Nut; (A) 10mm, Nut; (A) M10, Nut; M10x50, Nut; M10 M10, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10, Nut; 10x1,5mm, Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M10, Nut; (A: No Longer Required) M10, Nut; (B) M10 | 0 |
| 34***88 | Spring Pin; (A), Spring Pin; 7.925 X 44.450 mm (5/16" X 1-3/4"), Spring Pin; 5/16"X1-3/4", Spring Pin; 5/16" X 1-3/4", Spring Pin; 5/16" X 1-3/4" (Sub For 11h255), Spring Pin; 5/16" X 1-3/4", Dry Or Liquid Hill-Drop Only, Spring Pin; (A) 5/16" X 1-3/4", Spring Pin, Spring Pin; 0,312" X 1,75", Spring Pin; 7,9 X 44,45 mm | 8 |
| 34***43 | Spring Pin; 0.236" X 1.772", Spring Pin; 6 X 45 mm, Spring Pin, Spring Pin; (312), Spring Pin; (A: Option) 6 X 45 mm, Spring Pin; 6 X 45 mm (Sub For 34m7253), Spring Pin; 6x45mm, Spring Pin; (312) 6x45mm, Spring Pin; (A) 6 X 45mm, Spring Pin; (A) 6 X 5mm, Spring Pin; (A) 6 X 45 mm, Spring Pin; (A) 6x45mm, Spring Pin; 6 X 45 mm (Sub For 34m7043), Spring Pin; 6 X 45 mm (A), Spring Pin; 6 X 45mm | 0 |
John Deere : 640a - Front Loader : 100 Front Equipments : Round Bale Handler - Hydraulik Circuit (Lifting Height 1600 Mm) [D20]
| AH***67 | Hydraulic. Quick-Connect C; (C), Hydraulic. Quick-Connect C; (A), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)), Hydraulic. Quick-Connect C; (Includes R21722), Hydraulic. Quick-Connect C; (B: For 7000 Series Tractors), Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; 148 (-04***00), 158 (-04***00), 168, Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; (A: For Connection To 22 Series Combines), Hydraulic. Quick-Connect C; (Sub Re58243, This Application), Hydraulic. Quick-Connect C, Hydraulic. Quick-Connect C; (Iso), Hydraulic. Quick-Connect C; (Use With Ah162618), Hydraulic. Quick-Connect C; Body, Hydraulic. Quick-Connect C; Quick- Disconnect, Hydraulic. Quick-Connect C; (A: For 55 & 60 Series Tractors W/E-H Hitch), Hydraulic. Quick-Connect C; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Hydraulic. Quick-Connect C; (A: For United Kingdom, France, Germany And Sweden), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)) (Includes Internal O-Ring), Hydraulic. Quick-Connect C; (Use With Ah153774), Hydraulic. Quick-Connect C; (Standard Coupler), Hydraulic. Quick-Connect C; Female, Hydraulic. Quick-Connect C; (A: Install In 1 Select. Control Valve), Hydraulic. Quick-Connect C; (Sub Aw31338, This Application), Hydraulic. Quick-Connect C; (Includes Internal O-Ring), Hydraulic. Quick-Connect C; Iso Female, Hydraulic. Quick-Connect C; Iso, Hydraulic. Quick-Connect C; Quick-Disconnect, Hydraulic. Quick-Connect C; (Sub For An132350), Hydraulic. Quick-Connect C; (B), Hydraulic. Quick-Connect C; Conversion, For Combines With (Serial No. 62***01-62***00), Hydraulic. Quick-Connect C; (Sub Re58243, This Application) (A), Hydraulic. Quick-Connect C; (A) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; Quick Disconnect | 1 |
| AR***22 | Quick Coupler; (Sub For Ah15000), Quick Coupler; 3/4"-16 Unf, Quick Coupler; To No. 3 Scv, Quick Coupler; Male Coupler, Quick Coupler; 10 Male - Standard, Quick Coupler; (C), Quick Coupler; (A: Tractor Remote Cylinder Control Valve Operated Grapple) Iso, Quick Coupler; Iso 3/4"-16unf, Quick Coupler; (Illustrated), Quick Coupler; (To L.H. Port), Quick Coupler; Iso, 3/4"-16unf, Quick Coupler; Iso (Sub For An132283), Quick Coupler; (A: Required For Field Conversion To Independent Marker System), Quick Coupler; (A: To Pressure Coupler On Power Beyond) (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)), Quick Coupler; Two Per Assembly, Quick Coupler; Automatic Marker, Quick Coupler; (B: For 7000 Series Tractors), Quick Coupler; Male, (Sub For E73003), Quick Coupler; (A: 9550 (-69***00) 9550sh (-69***00)), Quick Coupler; R.H., Quick Coupler; 3/4" Iso, Quick Coupler; (A: Standard Flow - Long Drawbar), Quick Coupler; (A), Quick Coupler; Iso Coupler For Automatic Marker, Quick Coupler; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.), Quick Coupler; Iso, L.H. Port, Quick Coupler; (B: Male) 3/4"-16unf, Iso, Quick Coupler; (Also Order Ah128241, T77814 And 38h1445), Quick Coupler; (A: For Connection To 22 Series Combines), Quick Coupler; (A: Isolated Open Operator Station) (B: With Cab) (C), Quick Coupler; Male, Quick Coupler; To Rh Port, Quick Coupler; (Sub For An132283), Quick Coupler; To Pressure Coupler On Power Beyond, Quick Coupler; (A) (Sub For Al26973), Quick Coupler; Independent Marker, Quick Coupler; "Iso" (Sub For Al26973), Quick Coupler; Iso Coupler, Quick Coupler; (A: Isolated Open Operator Station/With Cab), Quick Coupler; Iso, 3/4", Quick Coupler; (A: 9550 (69***01-) 9550sh (69***01-)), Quick Coupler; (Sub For Aa23358), Quick Coupler; 3/4" 16 Unf, Quick Coupler; (B) Iso, 3/4"-16 Unf, Quick Coupler; For Automatic Marker, Quick Coupler; All Except 9000 Series Tractors, Quick Coupler; L.H. Port, Quick Coupler; (A) Male, Quick Coupler; (Sub For Ar30210) Iso Coupler, Quick Coupler; Complete, (Sub For Ar93819, R74242, R76477 And R76459), Quick Coupler; (Iso), Quick Coupler; 3/4"-16 Iso, Quick Coupler; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Quick Coupler; (Used On 492, 592, 692 And 892), Quick Coupler; (B: Male) Iso 3/4"-16 Unf, Quick Coupler; 4343mm (171") X 3/8", Quick Coupler; (Sub Aa40149), Quick Coupler; Iso, Quick Coupler; Iso, R.H. Port, Quick Coupler; Iso,3/4"-16unf, Quick Coupler; (B: Male) Iso, 3/4"-16 Unf, Quick Coupler; Iso Coupler For Independent Marker, Quick Coupler; (A: For 55 & 60 Series Tractors W/E-H Hitch), Quick Coupler; (Sub Ar94522), Quick Coupler; (B: Male) Iso, 3/4"-16unf, Quick Coupler; 3/4"-16unf Iso, Quick Coupler; (A: With Cab/Isolated Open Operator Station), Quick Coupler; Is0 Coupler, Quick Coupler; (Assembly), Quick Coupler; Half, Quick Coupler; (A), Male, Quick Coupler; (C: Standard Flow Long Drawbar), Quick Coupler; (A: All Except 9000 Series Tractors), Quick Coupler; L.H., Quick Coupler; (Sub For Al26971), Quick Coupler; 3/4", Quick Coupler; (A: Straddle Mount), Quick Coupler; (A: To Pressure Coupler On Power Beyond), Quick Coupler; 3/4" - 16unf Iso, Quick Coupler; (B: Male) 3/4"-16 Unf Iso, Quick Coupler; R.H. Port, Quick Coupler; For Independent Marker, Quick Coupler; 1/2" Fitting, Quick Coupler; (A) (B), Quick Coupler; Straight, Quick Coupler; (B: 8000 & 9000 Series Tractors), Quick Coupler; (Sub For Al26973), Quick Coupler; (B: Male) 3/4"-16 Unf Iso,, Quick Coupler; Iso Male, Quick Coupler; 3/4"-16unf Iso, 3/4"-16unf, Quick Coupler; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors), Quick Coupler; Complete, (Sub For Ar93820, R74242, R76777 And R76459), Quick Coupler; (A: Vacuum Pressure), Quick Coupler; (B), Quick Coupler; (3203 Tractor), Quick Coupler; Iso L.H. Port, Quick Coupler, Quick Coupler; Is0, Quick Coupler; (To R.H. Port), Quick Coupler; (B: Male) 3/4"-16unf Iso, Quick Coupler; Jam, Quick Coupler; (A: Pressure Coupler), Quick Coupler; Iso, 3/4" - 16unf, Quick Coupler; (B: Male) Iso 3/4"-16unf | 1 |
| CC***40 | Elbow Fitting | 0 |
John Deere : 640a - Front Loader : 100 Front Equipments : Round Bale Handler - Hydraulik Circuit (Lifting Height 2500 Mm) [D24]
| AH***67 | Hydraulic. Quick-Connect C; (C), Hydraulic. Quick-Connect C; (A), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)), Hydraulic. Quick-Connect C; (Includes R21722), Hydraulic. Quick-Connect C; (B: For 7000 Series Tractors), Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; 148 (-04***00), 158 (-04***00), 168, Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; (A: For Connection To 22 Series Combines), Hydraulic. Quick-Connect C; (Sub Re58243, This Application), Hydraulic. Quick-Connect C, Hydraulic. Quick-Connect C; (Iso), Hydraulic. Quick-Connect C; (Use With Ah162618), Hydraulic. Quick-Connect C; Body, Hydraulic. Quick-Connect C; Quick- Disconnect, Hydraulic. Quick-Connect C; (A: For 55 & 60 Series Tractors W/E-H Hitch), Hydraulic. Quick-Connect C; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Hydraulic. Quick-Connect C; (A: For United Kingdom, France, Germany And Sweden), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)) (Includes Internal O-Ring), Hydraulic. Quick-Connect C; (Use With Ah153774), Hydraulic. Quick-Connect C; (Standard Coupler), Hydraulic. Quick-Connect C; Female, Hydraulic. Quick-Connect C; (A: Install In 1 Select. Control Valve), Hydraulic. Quick-Connect C; (Sub Aw31338, This Application), Hydraulic. Quick-Connect C; (Includes Internal O-Ring), Hydraulic. Quick-Connect C; Iso Female, Hydraulic. Quick-Connect C; Iso, Hydraulic. Quick-Connect C; Quick-Disconnect, Hydraulic. Quick-Connect C; (Sub For An132350), Hydraulic. Quick-Connect C; (B), Hydraulic. Quick-Connect C; Conversion, For Combines With (Serial No. 62***01-62***00), Hydraulic. Quick-Connect C; (Sub Re58243, This Application) (A), Hydraulic. Quick-Connect C; (A) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; Quick Disconnect | 1 |
| AR***22 | Quick Coupler; (Sub For Ah15000), Quick Coupler; 3/4"-16 Unf, Quick Coupler; To No. 3 Scv, Quick Coupler; Male Coupler, Quick Coupler; 10 Male - Standard, Quick Coupler; (C), Quick Coupler; (A: Tractor Remote Cylinder Control Valve Operated Grapple) Iso, Quick Coupler; Iso 3/4"-16unf, Quick Coupler; (Illustrated), Quick Coupler; (To L.H. Port), Quick Coupler; Iso, 3/4"-16unf, Quick Coupler; Iso (Sub For An132283), Quick Coupler; (A: Required For Field Conversion To Independent Marker System), Quick Coupler; (A: To Pressure Coupler On Power Beyond) (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)), Quick Coupler; Two Per Assembly, Quick Coupler; Automatic Marker, Quick Coupler; (B: For 7000 Series Tractors), Quick Coupler; Male, (Sub For E73003), Quick Coupler; (A: 9550 (-69***00) 9550sh (-69***00)), Quick Coupler; R.H., Quick Coupler; 3/4" Iso, Quick Coupler; (A: Standard Flow - Long Drawbar), Quick Coupler; (A), Quick Coupler; Iso Coupler For Automatic Marker, Quick Coupler; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.), Quick Coupler; Iso, L.H. Port, Quick Coupler; (B: Male) 3/4"-16unf, Iso, Quick Coupler; (Also Order Ah128241, T77814 And 38h1445), Quick Coupler; (A: For Connection To 22 Series Combines), Quick Coupler; (A: Isolated Open Operator Station) (B: With Cab) (C), Quick Coupler; Male, Quick Coupler; To Rh Port, Quick Coupler; (Sub For An132283), Quick Coupler; To Pressure Coupler On Power Beyond, Quick Coupler; (A) (Sub For Al26973), Quick Coupler; Independent Marker, Quick Coupler; "Iso" (Sub For Al26973), Quick Coupler; Iso Coupler, Quick Coupler; (A: Isolated Open Operator Station/With Cab), Quick Coupler; Iso, 3/4", Quick Coupler; (A: 9550 (69***01-) 9550sh (69***01-)), Quick Coupler; (Sub For Aa23358), Quick Coupler; 3/4" 16 Unf, Quick Coupler; (B) Iso, 3/4"-16 Unf, Quick Coupler; For Automatic Marker, Quick Coupler; All Except 9000 Series Tractors, Quick Coupler; L.H. Port, Quick Coupler; (A) Male, Quick Coupler; (Sub For Ar30210) Iso Coupler, Quick Coupler; Complete, (Sub For Ar93819, R74242, R76477 And R76459), Quick Coupler; (Iso), Quick Coupler; 3/4"-16 Iso, Quick Coupler; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Quick Coupler; (Used On 492, 592, 692 And 892), Quick Coupler; (B: Male) Iso 3/4"-16 Unf, Quick Coupler; 4343mm (171") X 3/8", Quick Coupler; (Sub Aa40149), Quick Coupler; Iso, Quick Coupler; Iso, R.H. Port, Quick Coupler; Iso,3/4"-16unf, Quick Coupler; (B: Male) Iso, 3/4"-16 Unf, Quick Coupler; Iso Coupler For Independent Marker, Quick Coupler; (A: For 55 & 60 Series Tractors W/E-H Hitch), Quick Coupler; (Sub Ar94522), Quick Coupler; (B: Male) Iso, 3/4"-16unf, Quick Coupler; 3/4"-16unf Iso, Quick Coupler; (A: With Cab/Isolated Open Operator Station), Quick Coupler; Is0 Coupler, Quick Coupler; (Assembly), Quick Coupler; Half, Quick Coupler; (A), Male, Quick Coupler; (C: Standard Flow Long Drawbar), Quick Coupler; (A: All Except 9000 Series Tractors), Quick Coupler; L.H., Quick Coupler; (Sub For Al26971), Quick Coupler; 3/4", Quick Coupler; (A: Straddle Mount), Quick Coupler; (A: To Pressure Coupler On Power Beyond), Quick Coupler; 3/4" - 16unf Iso, Quick Coupler; (B: Male) 3/4"-16 Unf Iso, Quick Coupler; R.H. Port, Quick Coupler; For Independent Marker, Quick Coupler; 1/2" Fitting, Quick Coupler; (A) (B), Quick Coupler; Straight, Quick Coupler; (B: 8000 & 9000 Series Tractors), Quick Coupler; (Sub For Al26973), Quick Coupler; (B: Male) 3/4"-16 Unf Iso,, Quick Coupler; Iso Male, Quick Coupler; 3/4"-16unf Iso, 3/4"-16unf, Quick Coupler; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors), Quick Coupler; Complete, (Sub For Ar93820, R74242, R76777 And R76459), Quick Coupler; (A: Vacuum Pressure), Quick Coupler; (B), Quick Coupler; (3203 Tractor), Quick Coupler; Iso L.H. Port, Quick Coupler, Quick Coupler; Is0, Quick Coupler; (To R.H. Port), Quick Coupler; (B: Male) 3/4"-16unf Iso, Quick Coupler; Jam, Quick Coupler; (A: Pressure Coupler), Quick Coupler; Iso, 3/4" - 16unf, Quick Coupler; (B: Male) Iso 3/4"-16unf | 1 |
| CC***40 | Elbow Fitting | 0 |
John Deere : 640a - Front Loader : 100 Front Equipments : Round Bale Handler [D16]
| 34***88 | Spring Pin; (A), Spring Pin; 7.925 X 44.450 mm (5/16" X 1-3/4"), Spring Pin; 5/16"X1-3/4", Spring Pin; 5/16" X 1-3/4", Spring Pin; 5/16" X 1-3/4" (Sub For 11h255), Spring Pin; 5/16" X 1-3/4", Dry Or Liquid Hill-Drop Only, Spring Pin; (A) 5/16" X 1-3/4", Spring Pin, Spring Pin; 0,312" X 1,75", Spring Pin; 7,9 X 44,45 mm | 8 |
| 34***43 | Spring Pin; 0.236" X 1.772", Spring Pin; 6 X 45 mm, Spring Pin, Spring Pin; (312), Spring Pin; (A: Option) 6 X 45 mm, Spring Pin; 6 X 45 mm (Sub For 34m7253), Spring Pin; 6x45mm, Spring Pin; (312) 6x45mm, Spring Pin; (A) 6 X 45mm, Spring Pin; (A) 6 X 5mm, Spring Pin; (A) 6 X 45 mm, Spring Pin; (A) 6x45mm, Spring Pin; 6 X 45 mm (Sub For 34m7043), Spring Pin; 6 X 45 mm (A), Spring Pin; 6 X 45mm | 4 |
| AH***67 | Hydraulic. Quick-Connect C; (C), Hydraulic. Quick-Connect C; (A), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)), Hydraulic. Quick-Connect C; (Includes R21722), Hydraulic. Quick-Connect C; (B: For 7000 Series Tractors), Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; 148 (-04***00), 158 (-04***00), 168, Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; (A: For Connection To 22 Series Combines), Hydraulic. Quick-Connect C; (Sub Re58243, This Application), Hydraulic. Quick-Connect C, Hydraulic. Quick-Connect C; (Iso), Hydraulic. Quick-Connect C; (Use With Ah162618), Hydraulic. Quick-Connect C; Body, Hydraulic. Quick-Connect C; Quick- Disconnect, Hydraulic. Quick-Connect C; (A: For 55 & 60 Series Tractors W/E-H Hitch), Hydraulic. Quick-Connect C; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Hydraulic. Quick-Connect C; (A: For United Kingdom, France, Germany And Sweden), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)) (Includes Internal O-Ring), Hydraulic. Quick-Connect C; (Use With Ah153774), Hydraulic. Quick-Connect C; (Standard Coupler), Hydraulic. Quick-Connect C; Female, Hydraulic. Quick-Connect C; (A: Install In 1 Select. Control Valve), Hydraulic. Quick-Connect C; (Sub Aw31338, This Application), Hydraulic. Quick-Connect C; (Includes Internal O-Ring), Hydraulic. Quick-Connect C; Iso Female, Hydraulic. Quick-Connect C; Iso, Hydraulic. Quick-Connect C; Quick-Disconnect, Hydraulic. Quick-Connect C; (Sub For An132350), Hydraulic. Quick-Connect C; (B), Hydraulic. Quick-Connect C; Conversion, For Combines With (Serial No. 62***01-62***00), Hydraulic. Quick-Connect C; (Sub Re58243, This Application) (A), Hydraulic. Quick-Connect C; (A) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; Quick Disconnect | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Silo Cut [D12]
| 14***68 | Lock Nut; (B: W/ Hydraulic. Trailer Hitch) M12, Lock Nut; M12 (Sub For 14m7275), Lock Nut; (B: With Hydraulic. Trailer Hitch) M12, Lock Nut; (A: For 25 Knives Only) M12, Lock Nut; (A) (B) (C), Lock Nut; (C: Up To Series 2111 (-13397), 2113 (-06***03), 2115 (-06***01)) (D: Up To Series 2117 (-06***01), 2122 (-13423), 2126 (-06***05)) M12, Lock Nut; (A) 12mm, Lock Nut; M12 (Sub For Cc51305), Lock Nut; 14mm, Lock Nut; M12, Lock Nut; (A: Model 9660 For North America Only) M12, Lock Nut; M12 (For Dc35502, Dc41100, Dc47507, Dc54697), Lock Nut; (A) (Sub For A31867), Lock Nut; (A: Triple) (B: Dual) M12, Lock Nut; (D: Components Of Item Dq73362) M12, Lock Nut; (A: With Tow Coupling) M12, Lock Nut; (A: With Front Loader Only) M12, Lock Nut; M12 Lh, Rh, Lock Nut; 12mm (Sub For 43m7005, 43m7006), Lock Nut; (A: For Elc Plus Monitor) M12, Lock Nut; (A: With Pick-Up Hitch And Hydraulic. Center Link) M12, Lock Nut; (A: For Fork-Type Pickup) M12, Lock Nut; M12, M8, Lock Nut; (A) (B) M12, Lock Nut, Lock Nut; (A: For Multicrop Machines) M12, Lock Nut; (A) M12, Lock Nut; (B: With Hydraulic Trailer Hitch) M12, Lock Nut; M12, M12, Lock Nut; (C: With Pick-Up Hitch And Hydraulic. Center Link) M12, Lock Nut; (A: Long Row) M12 (Sub For 14m7512), Lock Nut; (B: For Silage Special Machines) M12, Lock Nut; M12, Lock Nut; M14, Lock Nut; (A) M12 (Sub For A31867), Lock Nut; M12 |, Lock Nut; (Sub For Cc51305), Lock Nut; 12 mm, Lock Nut; M12 Lh, Lock Nut; (A) M14, Lock Nut; (B) M12, Lock Nut; 12mm, Lock Nut; (A), Lock Nut; (E: Starting From Series Number 2109 (07***01-), 2111 (06***01-), 2113 (06***01-), 2115 (06***01-)) (F: Starting From Series Number 2117 (06***01-), 2122 (06***01-), 2126 (06***06-)) M12 2130, Lock Nut; (A: Basic) M12, Lock Nut; 12mm (Sub For 14m5839), Lock Nut; M12 (Sub For 14m5839), Lock Nut; (A: For Rotor-Type Pickup) M12, Lock Nut; (A: Straddle Mount) M12, Lock Nut; M12 (Sub For B30963), Lock Nut; (A: With Rotor-Type Pickup) M12, Lock Nut; (D: With Scv) M12, Lock Nut; M12 M12, Lock Nut; (A: For 14 Knives Only) M12, Lock Nut; (C: With Pick-Up Hitch And Hydraulic Center Link) M12, Lock Nut; M12 2122, 2126, Lock Nut; 12mm (Sub For 43m7006), Lock Nut; M12, Lock Nut; M12 (Sub For A31867), Lock Nut; (B), Lock Nut; M12 M12x40, (Hs=10.9), Lock Nut; M12, (312) M12, Lock Nut; M12 2122, 2126, 2130 | 2 |
| 14***73 | Nut; M8 (European), Nut; (A: Used In 5625hc Tractor Too) M8, Nut; (A: Without Cab, From Serial No. 00***23) (B: With Cab, From Serial No. 00***21) M8 (Sub For Er022116 Appl), Nut; (G: Mc1 Cab) M8, Nut; M8 (With Rops Only), Nut; M8 M8 Use With Re544045, Nut; M8 (On Starter Stud Before Cable), Nut; M8, 12-Row Narrow R.H. Transmission, Nut; (B: Dubuque (To) Esn -70***95) M8, Nut; (B: Dubuque (T0) Esn 71***12-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M8, Nut; (B: Dubuque (T0) Esn 77***67-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (B: With Hydraulic Cab Suspension (Hcs)) M8, Nut; M8 W/Autodrac, Nut; M8 Mechanical Front Wheel Drive, Nut; (B: With Cab) M8 (Sub For Er022116 Appl), Nut; M8 (Sub For Er022086 Appl), Nut; M8 Not Illustrated, Nut; (G) M8, Nut; M8 Sub For M500807, Nut; (B: Dubuque (T0) Esn -89***59) (C: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (D: Dubuque (To) Esn -71***11) (E: Saran (Cd) Esn -Xxxxxx) (F: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (A: Without Cab) M8 (Sub For Er022116 Appl), Nut; M8, (Df105), Nut; (A) (C) M8, Nut; (B: Not In Kit; Less Electronic Governor; Order Separately) M8, Nut; M8 (Engine Marked 3tne78a-Jt42) (Also Order 12m7065), Nut; (A) 8mm, Nut; M8 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal, (Sub For R127382, This Application) Copper, Cuivre, Kupfer, Rame, Cobre, Koppar, Nut; M8, (Sub For Ch12755), Nut; M8, (Also Order 12m7065 And 24m7055), Nut; (A: Pressure) M8, Nut; M8 For Liquid Fertilizer Spout, Nut; M8, (Sub For M500807), Nut; M8 (Sub For 06***09), Nut; M8, (Sub For Ffsb107997), Nut; (A: See Your Authorized Pump Repair Station For Internal Parts) (B: Dubuque (T0) Esn 77***67-) (C: Saran (Cd) Esn -Xxxxxx) M8, Nut; (Sub For Ch12400), Nut; M8 (Use With H175610), Nut; M8 (Sub For Er023115 Appl), Nut; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M8, Nut; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M8, Nut; (A) M8, Nut; M8 (With Cab), Nut; M8, Mc1, Cc2, Nut; M8 (Sub For J950008), Nut; (B: Dubuque (To) Esn -70***35) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; M8, 6-Row Narrow, Nut; (B: Cab) M8, Nut; M8 (Sub For Th0600732) (Sub For 06***32), Nut; M8, (Sub For W40488), Nut; M8, (Front And Rear), Nut; M8 Power Lead, Nut; (A: With Hydraulic Cab Suspension (Hcs)) M8, Nut; M8, (10), Nut; (A: From Sr.No 5310s(00***84-), 5410 (00***19-), 5610 (00***01-).) M8, Nut; M8 (Use With R126331), Nut; (B: Dubuque (T0) Esn -89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (F) M8, Nut; M8 B+, Nut; (B: Dubuque (To) Esn -89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (D: Dubuque (T0) Esn 71***12-Xxxxxx) (E: Saran (Cd) Esn Xxxxxx-Xxxxxx) (F: Torreon (Pe) Esn Xxxxxx-Xxxxxx) M8, Nut; (A: Optional For European Application.) M8, Nut; M8, M8, Nut; M8, (Sub For 19m7139), Nut; M8 (For Al119373), Nut; (A), Nut; (B: Dubuque (T0) Esn -71***39) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; M8, (Use With Re521050), Nut; (A: Isolated Open Operator Station) (C: With Cab) M8, Nut; (B: Dubuque (T0) Esn 77***67-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (A) M8, (Battery Cable), Nut; M8 (Use With Re254952), Nut; M8, (Sub For Ch12400), Nut; M8 M8 (Sub For 9091105080), Nut; (A: Collarshift Transmission (5220) Sn 42***11- (5320) Sn 43***07-) M8, Nut; (B: Dubuque (T0) Esn -70***95) M8, Nut; M8 M8 Powrquad, Nut; (A: With Air Trailer Brake System) M8, Nut; M8 (Sub For Er022116 Appl), Nut; (A: Note; (1820)-70***82,70***84,70***87-70***93,70***00-70***18,70***21-70***25 & 70***28)) M8, Nut; (E: For Liquid Fertilizer Spout) M8 12-Row, 36-And 38-Inch; 16-Row, 30-Inch, Nut; (A: Upto Sr.No. 5103s-01***61, 5203-00***61.) M8, Nut; (B: Dubuque (To) Esn -71***31) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; M8 (Use With Outer Roof Marked R256057 Or R237931), Nut; M8 (Sub For Er022441 Appl), Nut; M8 (Std Duty), Nut; M8 (Sub For Er022115 Appl), Nut; M8, (Sub For Ch11459), Nut; M8 Use With 12m7065 And T27860, Nut; (B: Dubuque (T0) Esn 73***15-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M8, Nut; M8, Code 3115, Nut; (B: Saran (Cd) Esn Xxx-) (C: Torreon (Pe) Esn Xxx-) M8, Nut; (B: Dubuque (T0) Esn 73***70-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (A) (B) (C) M8, Nut; M8 (Use With Ah96317), Nut; M8 Use With Am127407, Nut; (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)) M8, Nut; (B: Dubuque (To) (70***59-)) (C: Saran (Cd) (Xxxxxx -)) (D: Torreon (Pe) (Xxxxxx-)) M8, Nut; (C) M8, Nut; (B: Dubuque (To) Esn 71***40-) (C: Dubuque (To) Esn -89***59) (D: Saran (Cd) Esn -Xxxxxx) (E: Torreon (Pe) Esn -Xxxxxx) M8, Nut; M8 (Also Order 12m7065), Nut; M8, (Not Included) (Df105), Nut; (B: Esn -76***47) (C: Esn 7410 -76***55) M8, Nut; (C), Nut; (B: (Xxxxxx-) 8560-00***91; 8760-00***00; 8960-00***97) M8, Nut; M8, (Use W/3009df, 3011df, 3014df Or 3015df) (4019df, 4020df), Nut; M8 Jds118, Nut; M8, Nut; M8 17/32" Thick, Nut; M8 (For Al110920), Nut; 8mm (Sub For 14m7014), Nut; (B: Torreon (Pe) Esn Xxxxxx-) M8, Nut; (A: Collarshift Transmission (5220) Sn -42***10 (5320) Sn -43***06) M8, Nut; (B: Dubuque (To) Esn -71***31) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) M8, Nut; M8 (Sub For J231108), Nut; (A: From Sr.No. 5103s-01***62, 5203-00***62, 5104/5204/5038d-00***01.) M8, Nut; M8, (Sub For Ch10629), Nut; (Sub For Ch11459) (Use With 4019df), Nut; (A: With Engine Stage Ii Acc. 97/68/Ec) M8, Nut; (B: Dubuque (T0) Esn 70***59-73***14) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) (D: Torreon (Pe) Esn Xxxxxx-Xxxxxx) M8, Nut; (A: (6068hn053)) M8, Nut; M8 (Sub For 01***03), Nut; M8 (Nlr), Nut; (A: At172138 Kit) (B: At172139 Kit) M8, Nut; (K) M8, Nut; (A: With Right-Hand Thread) M8, Nut; (A: (-Xxxxxx) 8100-01***27; 8200-01***33; 8300-01***66; 8400-01***83) M8, Nut; M8 (925 Flex Arg) (Not On 930 Flex Arg), Nut; (A: Mechanical Front Wheel Drive) M8, Nut; (B) M8, Nut; (A: Used In 5425 Orchard Tractor Too) M8, Nut; (C: Without Cab, From Serial No. 00***23) (D: With Cab, From Serial No. 00***21) M8 (Sub For Er022116 Appl), Nut; (A: Use Only With Electro-Hydraulic Power Take-Off) M8, Nut; M8, 4-Row Narrow And 4-Row Wide, Nut; M8 To Rad Coolant Tank, Nut; (A: With Work Light (Sg2)) M8, Nut; M8, (Hs, Head Marked 10.9), Nut; (B: Used In 5615hc Tractor Too) (C: Used In 5715hc And 5715 Orchard Tractors Too) M8, Nut; (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) (D) M8, Nut; (A: Mechanical Front Wheel Drive) M8, Nut; (B: Dubuque (To) Esn 70***96-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) (E: Dubuque (To) Esn -89***59) M8, Nut; (Sub For J950008), Nut; M8 (For Er047331) (Sub For Er022115 Appl), Nut; M8 (Engine Marked -Jk2, -Jk2e, -Ejk2, -Ejk2e), Nut; (A: With Cab) M8, Nut; M8 (A), Nut; M8, (Sub For Ffsb107997 And M500807), Nut; (A) M6, Nut; M8 (Sub For 14m1975), Nut; (B: Dubuque (T0) Esn 71***40-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (B: Dubuque (To) Esn 71***32-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M8, Nut; M8, (Sub For (4) Mg100015), Nut; M8 (Use With Re521050), Nut; M6, Nut; (Sub For Ch11459), Nut; (B) (C: Esn 7410 -76***55) M8, Nut; M8 (Sub For Er122799 Appl), Nut; (B: Dubuque (T0) Esn -70***25) M8, Nut; (B: Dubuque(T0) Esn 70***95-73***69) M8, Nut; M8 (For Al64570), Nut; M8 (Sub For M500807), Nut; M8 (15 Per Australia And New Zealand), Nut; (A: Collarshift Transmission (5420) Sn -44***12 (5520) Sn -45***03) M8, Nut; (A: Note; 9550 (-70***00) 9550sh (-70***00)) M8, Nut; (B: Dubuque (T0) Esn -71***39) M8, Nut; (A: 2wd) M8, Nut; (Sub For J231108), Nut; M8 M8 (Sub For At260107) (Sub For 9091105080), Nut; M8, (Sub For Ffsb108151), Nut; (A: With Engine Stage Ii Acc. 97/68/Ec) M8 M8, Nut; (B: Dubuque (To) Esn 70***59-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M8, Nut; (B: 2-Post Roll Gard Standard Version) M8, Nut; M8 (1512e, 1810e, 1814e), Nut; M8, (Sub For J950008), Nut; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) M8, Nut; (Sub For Ch11459) (Use With 3011df And 3014df), Nut; M8 Use With Re521050, Nut; 8 mm, Nut; (B: Saran (Cd) Esn -Xxxxxx) M8, Nut; M8 (Use With Re177896), Nut; M10, Nut; (Not Used This Application), Nut; M8, B+, Nut; (B: Saran (Cd) Esn Xxxxxx-) M8, Nut; M 8, Nut; M8 M8, Nut; (B) 8mm |, Nut; M8 (Use With 19m7997), Nut; (A: Note; 9550 (70***01-) 9550sh (70***01-)) M8, Nut; (B: Dubuque (To) Esn -71***11) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (A) (B) M8, Nut; (B: For 6505 Tractors) M8, Nut; M8, Nut; (A: Without Cab) M8, Nut, Nut; M8 (B+), Nut; M8 (Engine Marked 3tne84-Jt43) (Also Order 12m7065), Nut; (B: Dubuque (To) Esn -70***58) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; M8 Up, Nut; (A: Included In Ae48634) M8, Nut; (C: With Front Wheel Brakes) M8, Nut; (B: (Xxxxxx-) 8560-00***91; 8760-00***00; 8960-00***97) (C: (-Xxxxxx) 8560-00***30; 8760-00***21) M8, Nut; M8 (Sub 14m7298), Nut; M8 For Cab Model, Nut; M8 Sub For J231108, Nut; M8 (Sub For Th0630509) (Sub For 06***09), Nut; M8, 12-Row; 22" Spacing, Nut; (A: With Powrquad Transmission) (B: With Autopowr-Transmission) M8, Nut; (A: Double Quantities If Equipped With Double Twine Arms) M8, Nut; M8 (Sub For L55969), Nut; (B: Hydraulic Center Link) M8, Nut; M8, (Sub 14m7273 And 12m7065), Nut; M8 (Sub For At260107) (Sub For 9091105080), Nut; M8 (Sub Ty16306), Nut; 8mm, Nut; (A: Shear Bolt Set) M8, Nut; M8 M8 Hx Nut, Nut; (B: Dubuque (T0) Esn 70***96-89***59) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M8, Nut; (F: Mc1 Cab) M8, Nut; (A: For 6205 Tractors) (C: Not For Msl) M8, Nut; (B: Dubuque (T0) Esn -71***39) M8, Nut; (B: Torreon (Pe) Esn Xxxxxx-) M8, Nut; (B: Dubuque (T0) Esn 73***15-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn All) M8, Nut; (B: Dubuque (T0) Esn 70***59-73***14) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) M8, Nut; M8 (Sub For 14m7347), Nut; M8 (Sub For Th0168203) (Sub For 01***03), Nut; M8, 8450 Tractor, Nut; (B: Dubuque (T0) Esn -71***11) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (B: Dubuque (T0) Esn 70***26-71***39) M8, Nut; M8 (Sub For Ch12755), Nut; M8, (3015df002), Nut; (B: Dubuque (T0) Esn 71***40-89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (A: With Work Light Front) M8, Nut; (A: With Front Wheel Brake) M8, Nut; M8 (10), Steel, Acier, Stahl, Acciaio, Acero, Stal, (Sub For R127382, This Application) Copper, Cuivre, Kupper, Rame, Cobre, Koppar, Nut; (B: Dubuque (T0) Esn 78***13-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M8, Nut; (A: Required With Piston Pump Fertilizer System.) M8, Nut; M8 (Use With 03m7184), Nut; M8, (2 Used Single) (3 Used Dual), Nut; (A: 12-Row/22") M8, Nut; M8 (Sub For At260107) (Sub For 9091105080)M8, Nut; (Sub For M500807), Nut; (A: Collarshift Transmission (5420) Sn 44***13- (5520) Sn 45***04-) M8, Nut; (B: Dubuque (To) Esn -70***58) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (A: Used In 5615 Hc Too) M8, Nut; (A: From Sr.No.5103e-00***54, 5103-01***65, 5103s-01***62, 5203-00***62, 5104/5204-00***01, 5038d-00***01.) M8, Nut; M8 (Sub N207955), Nut; (B: Dubuque (T0) Esn 70***36-73***14) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) (D: Torreon (Pe) Esn Xxxxxx-Xxxxxx) M8, Nut, Nut; (Sub For Ch11459) (Use With 3009df), Nut; (B: Dubuque (T0) Esn -89***59) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M8, Nut; (E: (-Xxxxxx) 7600-00***64; 7700-00***58; 7800-00***04) M8, Nut; 8x1,25mm, Nut; M8 X 1.25, Nut; (A) 8mm |, Nut; M8, Low, Nut; M8, (Australia And New Zealand 8 Per), Nut; M8, M16, Nut; (A: Saran (Cd) Esn Xxxxxx-) (B: Torreon (Pe) Esn Xxxxxx-) M8, Nut; M8 (Sub For Pe993510), Nut; (A: 24r20) (B: 31/32r15) M8, Nut; M8, Power Lead, Nut; M8 M8 Sub For At260107, Sub For 9091105080, Nut; (Sub For Ffsb108151), Nut; M8 Mc1 Cc2, Nut; M8, 8-Row Wide R.H. Transmission, Nut; M8 (Sub For Er022086, Appl), Nut; (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn Xxxxxx-) M8, Nut; M8 Lh, Rh, Nut; (C: Dubuque (T0) Esn 71***32-) (D: Saran (Cd) Esn Xxxxxx-) (E: Torreon (Pe) Esn Xxxxxx-) M8, Nut; 8x1,25mm (Sub For 14m3244), Nut; M8 (Engine Marked -Jk1, -Jk1e, -Ejk1, -Ejk1e), Nut; M8 This Application Only, Nut; M8 (Sub For Ch10629), Nut; M8 Without Tilt Steering, Nut; M8 Hs=10.9, Nut; (B: Dubuque (T0) Esn -89***59) (C: Saran (Cd) Esn -Xxx) (D: Torreon (Pe) Esn -Xxx) M8, Nut; (B: Dubuque (To) Esn 71***12-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M8, Nut; (B: Esn -76***47) (C: Esn 7410 -76***55) M8, Nut; (C: Mc1 Cab) M8 | 4 |
| 19***84 | Screw; M8 X 55 (Sub For J900855), Screw; M8 X 55 Sub For J010855, At131308, Screw; M8 X 55 2113, Screw; (A: Only For 50 Km/H) M8 X 55, Screw; M8 X 55, Danfoss, Cap Screw; M8 X 55, (Sub For J010855, At131308), Screw; (A: For Italy Only) M8 X 55 (Sub For Er020802 Appl), Screw; (A) M8 X 55, Screw; M8 X 55 (For Dc35394), Screw; M8 X 55 (A) (Sub For Es10346), Screw; M8 X 55 2130, Screw; (A: For Msl) M8 X 55, Screw; M8x55mm, Screw; (A: For Italy Only) M8 X 55 (Sub For Er020802 Appl), Screw; M8 X 55 2126, Screw; M8 X 55 (Hs, Head Marked 10.9), Screw; 8x55mm, Screw, Screw; M8x55, Screw; M8 X 55, Screw; (C: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- ), 2115 (07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M8 X 55, Screw; M8 X 55 (Sub For Er020802 Appl), Screw; M8 X 55 Sub For J010855, Screw; M8 X 30 (Sub For 19m7039), Screw; M8 X 55 M8x55, Screw; (C: Only For 2.0 M Rotor Type Pickup) M8 X 55, Screw; M8 X 55, (Sub For Es10346), Screw; M8 X 55 (For Dc35156, Dc35394) | 4 |
John Deere : 640a - Front Loader : 100 Front Equipments : Silo Cut [D14]
| 19***95 | Cap Screw; M8 X 45 (Sub H164921), Cap Screw; M8 X 45 M8 X 45, Cap Screw; M8x45, Cap Screw; M8 X 45, (Shear Bolt), Cap Screw; (A) M8 X 45, (Shear Bolt), Cap Screw; M8 X 45, (312) M8x45, Cap Screw; M8 X 45 (Sub For 19m7092), Cap Screw, Cap Screw; 8x45mm (Sub For 19m2851), Cap Screw; (A) M8 X 45, Cap Screw; 8 X 45 mm, Cap Screw; M8 X 45, M8x45, Cap Screw; M8 X 45 (A), Cap Screw; (A) (B), Cap Screw; M8 X 45, Cap Screw; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8 X 45, Cap Screw; M8 X 45, (312), Cap Screw; (A) M8x45, Cap Screw; M8 X 40, Cap Screw; M8 X 45 (Sub (2) 19m8359), Cap Screw; M8 X 45, (Sub For (2) Mg508080), Cap Screw; M8 X 45 (Shear Bolt), Cap Screw; M8 X 45 Rear, Cap Screw; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8 X 45, Cap Screw; 8x45mm | 2 |
| 58***75 | Part Missing In Wise; (W/ Al28736), Part Missing In Wise; (Sub For Jd7798 Appl), Part Missing In Wise; M10 X 1, Part Missing In Wise; (B: For Central Lubrication System Only) M10 X 1, Part Missing In Wise; Used On Item 21, Part Missing In Wise; (For Al28740 Or Al28917 Or Al37279), Part Missing In Wise; (A: For Central Lubrication System Only), Part Missing In Wise; (A) (B), Part Missing In Wise; 10 X 1 mm, Part Missing In Wise; M10, Part Missing In Wise; (A: For Double-Row Bearing), Part Missing In Wise; (312) M10, Part Missing In Wise; (For Al28740, Al37279), Part Missing In Wise; M10 X 1 (Sub For Er024260 Appl), Part Missing In Wise; M10 (Use With Re23191), Part Missing In Wise; (Sub For Er024260, Appl), Part Missing In Wise; 10 mm, Part Missing In Wise; (For Al200838), Part Missing In Wise, Part Missing In Wise; M10x1 (Sub For Er024260 Appl), Part Missing In Wise; (A: Tractor Serial Number 5605 -08***28, 5705 -08***28) (B: Tractor Serial Number 5605- 09***76-), Part Missing In Wise; (Sub For Jd7798), Part Missing In Wise; (A: For Central Lubrication System Only) M10 X 1, Part Missing In Wise; 10, Part Missing In Wise; M10x1, Part Missing In Wise; Front, Part Missing In Wise; (Sub For Er024260 Appl), Part Missing In Wise; (B: Front), Part Missing In Wise; (A: Tractor Serial Number 5605- 08***29-09***75 , 5705- 08***29-), Part Missing In Wise; (For L200754) | 2 |
| AH***67 | Hydraulic. Quick-Connect C; (C), Hydraulic. Quick-Connect C; (A), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)), Hydraulic. Quick-Connect C; (Includes R21722), Hydraulic. Quick-Connect C; (B: For 7000 Series Tractors), Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; 148 (-04***00), 158 (-04***00), 168, Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; (A: For Connection To 22 Series Combines), Hydraulic. Quick-Connect C; (Sub Re58243, This Application), Hydraulic. Quick-Connect C, Hydraulic. Quick-Connect C; (Iso), Hydraulic. Quick-Connect C; (Use With Ah162618), Hydraulic. Quick-Connect C; Body, Hydraulic. Quick-Connect C; Quick- Disconnect, Hydraulic. Quick-Connect C; (A: For 55 & 60 Series Tractors W/E-H Hitch), Hydraulic. Quick-Connect C; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Hydraulic. Quick-Connect C; (A: For United Kingdom, France, Germany And Sweden), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)) (Includes Internal O-Ring), Hydraulic. Quick-Connect C; (Use With Ah153774), Hydraulic. Quick-Connect C; (Standard Coupler), Hydraulic. Quick-Connect C; Female, Hydraulic. Quick-Connect C; (A: Install In 1 Select. Control Valve), Hydraulic. Quick-Connect C; (Sub Aw31338, This Application), Hydraulic. Quick-Connect C; (Includes Internal O-Ring), Hydraulic. Quick-Connect C; Iso Female, Hydraulic. Quick-Connect C; Iso, Hydraulic. Quick-Connect C; Quick-Disconnect, Hydraulic. Quick-Connect C; (Sub For An132350), Hydraulic. Quick-Connect C; (B), Hydraulic. Quick-Connect C; Conversion, For Combines With (Serial No. 62***01-62***00), Hydraulic. Quick-Connect C; (Sub Re58243, This Application) (A), Hydraulic. Quick-Connect C; (A) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; Quick Disconnect | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Arm Support [C14]
| 14***31 | Nut; M6, Nut; M12 (D), Nut; M12, Nut; M12m, Nut; 12 mm, Nut; M12 (W/ E63932), Nut; 12 mm (W/ E63932) Key 3, Nut; M12 (For Z45182), Nut; 3/8", Nut; (A: For Exportation) M12, Nut; 12 mm (W/ Dc18663), Nut; M14, Nut; M12, M12, Nut; M12 (Sub For 14m7042) |, Nut; (A) (B) (C), Nut; Ar, M12 (Sub For 14m7042), Nut; (C: For Commandcenter) M12, Nut; 14 mm, Nut; (A) (B) (C) M12, Nut; M12 (Sub For 14m7042), Nut; M12 M12, Nut; 12 mm (W E63932) Key 3, Nut; M12 (W/ E63930), Nut; (A) M12, Nut; 12mm, Nut, Nut; Ar, M12, Nut; M12, (312) M12, Nut; M12 |, Nut; M12, (312), Nut; M12 (W/ Dc18663), Nut; M12 Sub For 14m7275, Nut; 12x1,75, Nut; (A), Nut; M12 (Sub For 14m7066), Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M12, Nut; M12, M8x80, Nut; (C) M12, Nut; M12, Rh, Nut; 12 mm (W/ E63930), Nut; M12 (W/ Dc18661) | 4 |
| 19***71 | Cap Screw; M12 X 25, Cap Screw; M12 X 35 M12x35, Cap Screw; M12 X 35, Cap Screw; 12x35mm, Cap Screw; M12x35, Cap Screw; (C: For Commandcenter) M12 X 35, Cap Screw; M12 X 35 M10, Cap Screw; (A) M12x35, Cap Screw; M12 X 35 (Sub For 19m7477), Cap Screw; 12 X 35 mm | 4 |
| CC***22 | Wear Ring | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Arm [C12]
| 34***41 | Snap Ring; 7/32"X1/2", Snap Ring; 6x36mm, Snap Ring; 6 X 36 mm, Snap Ring; 6 X 36mm, Snap Ring; 6 X 36 mm (Sub For R114401), Snap Ring; 6 X 30 mm, Snap Ring; 6x30mm, Snap Ring; (B) 6x36mm, Snap Ring, Snap Ring; 6 X 36 mm (Use With Re187984) | 4 |
| 34***49 | Spring Pin; 8 X 50 mm, Spring Pin; M8 X 50, Spring Pin; 8 X 50 mm Lh, Rh, Spring Pin; (C: For Adaption Gripper Bucket) 8 X 50 mm, Spring Pin; (B: For Adaptation Gripper-Bucket) 8 X 50 mm, Spring Pin; (B: For Adaptation Gripper Bucket) 8 X 50 mm, Spring Pin; (B) 8 X 50 mm, Spring Pin; (C) 8 X 50 mm, Spring Pin; (A: Only For 2.0 M Hiflow Pickup) 8 X 50 mm, Spring Pin; 8 X 50, Spring Pin; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) 8 X 50 mm, Spring Pin; 8 X 50 mm (Sub For Cc51316), Spring Pin; (A: Only For 2, 0 M Hiflow Pickup) 8 X 50 mm, Spring Pin; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) 8 X 50 mm, Spring Pin; (A: For 1, 81 M Pickup And 2, 20 M Hiflow Pickup) (C: For 2, 00 Meter Pickup Hiflow) 8 X 50 mm, Spring Pin, Spring Pin; 8x50mm, Spring Pin; 8 X 50 mm Sub For 34m7048, Spring Pin; (A) 8x50mm, Spring Pin; 8 X 50 mm Rh, Spring Pin; (A: For Msl) 8 X 50 mm, Spring Pin; 8 X 50 mm 8x50, Spring Pin; (A: For 2, 00 Meter Pickup Hiflow) 8 X 50 mm, Spring Pin; (C: For Adaptation Gripper-Bucket) 8 X 50 mm, Spring Pin; (A) 8 X 50 mm, Spring Pin; (A: For Adaptation Gripper Bucket) 8 X 50 mm, Spring Pin; 8 X 50 mm 8x50 mm, Spring Pin; (A: Only For 1.8 M Pickup) 8 X 50 mm, Spring Pin; (A: For Adaptation Gripper-Bucket) 8 X 50 mm, Spring Pin; 8 X 50 mm (Sub For 34m3877) | 4 |
| 40***31 | Snap Ring; 30 X 1, 5 mm, Snap Ring; 47 X 1.75 mm, Snap Ring, Snap Ring; (A) 30 X 1,5 mm, Snap Ring; 30 mm, Snap Ring; 30 X 1, 5mm, Snap Ring; 30 X 1.5 mm, Snap Ring; 35x1.5mm, Snap Ring; 30x1,5m, Snap Ring; 50x1,5mm, Snap Ring; 30 X 1,5mm, Snap Ring; For Brazil, Snap Ring; 30x1, 5 mm, Snap Ring; 30mm, Snap Ring; Ar, 30 X 1,5 mm, Snap Ring; 30x15mm, Snap Ring; 30x1,5mm, Snap Ring; 30x1, 5mm, Snap Ring; 30 X 15 mm, Snap Ring; 30x1,5mm (For Z45322), Snap Ring; (A) 30x1,5mm, Snap Ring; 47 X 1,75 mm, Snap Ring; 50 X 1,5 mm, Snap Ring; 30 X 1,5 mm | 4 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Bracket For Electro-Hydraulic Valve [D07]
| 14***14 | Nut; 10mm, Nut; 10 mm, Nut; M8, Nut; (A) 8mm, Nut; 8mm, Nut; (A) M8 | 2 |
| 14***40 | Nut; M10 |, Nut; M8 (Sub For 14m7137), Nut; M16, Nut; 10mm, Nut; (Sub For 14m7039), Nut; M8, Nut; 10mm (Sub For 14m7039), Nut; M10, (312) M10, Nut; 10 mm, Nut; M10, 3,2x20mm, Nut; (C) M10, Nut; Ar, 10mm, Nut; M10, (312), Nut; (A: For Rice) M10, Nut; M10, Nut; (B) 8 mm, Nut; Ar, M10, Nut; M10 (Ord W/Sb12585100/0), Nut; M10, M10x25, Nut; 12mm, Nut; (D: Components Of Item Dq73362) M10, Nut; M10 (Sub For 14m7273), Nut; M10 Lh, Nut; (A: Rice Version) M10, Nut; (A: W/ Lateral Tilt) M10, Nut, Nut; (A) M8, Nut; M10, M10, Nut; M10, M12x30, Nut; M10, 11x21x2mm, Nut; M10 (Sub For 14m7039), Nut; (A: Rice) M10, Nut; (A) 10mm, Nut; (A) M10, Nut; M10x50, Nut; M10 M10, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10, Nut; 10x1,5mm, Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M10, Nut; (A: No Longer Required) M10, Nut; (B) M10 | 2 |
| 19***01 | Cap Screw; 8x40 mm, Cap Screw; M8 X 40 (Sub For 19m7323), Cap Screw; M8x40, Cap Screw; (A) M8 X 40, Cap Screw; M8 X 40 M8x40, Cap Screw; M8 X 40 W/Cab, Cap Screw; (A) M8x40, Cap Screw; M8 X 40 (Medium Height Position), Cap Screw; M8 X 40 (Sub For J260840), Cap Screw; M8 X 40 (W/ Washer), Cap Screw; M8 X 40 (Low Height Position), Cap Screw, Cap Screw; M8 X 40, Cap Screw; M8 X 40, M8x40, Cap Screw; 8x40mm, Cap Screw; (A: Region Ii Only) M8 X 40, Cap Screw; (B: W/Cab) M8 X 40, Cap Screw; M8 X 40 (Sub For 19m7298), Cap Screw; M8 X 40 (Sub For J900840), Cap Screw; (A: Only For North America And Japan) M8 X 40 | 2 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Electro-Hydraulic Valve [D05]
| CC***40 | Elbow Fitting | 3 |
| CC***41 | Fitting | 3 |
| CC***26 | Elbow Fitting | 5 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Extension Cylinder [D01]
| DC***21 | Packing | 1 |
| DC***40 | Elbow Fitting | 2 |
| DC***20 | Hydraulic Cylinder | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Grapple Cylinder [C16]
| 19***08 | Screw; M16 X 50 (Hs=12.9), Screw; M16 X 50 M16x50 (12.9), Screw; M16 X 50, Screw; M16 X 50 M16 X 50 (12.9), Screw; M16 X 50 (12.9), Screw, Screw; M16x50 | 1 |
| CC***40 | Elbow Fitting | 2 |
| CC***31 | Thrust Bearing | 4 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Lift Cylinder [D03]
| CC***26 | Elbow Fitting | 2 |
| DC***04 | Hydraulic Hose; Lgth = 500 mm | 1 |
| DC***03 | Hydraulic Hose; Lgth = 800 mm | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Main Frame [C10]
| DC***83 | Undercarriage | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Pivot Assembly [C22]
| 14***70 | Lock Nut; M16 Long, Lock Nut; 16 mm, Lock Nut; 16mm, Lock Nut; M16, 18x30mm, Lock Nut; (A) (B) M16, Lock Nut; M16 Lh, Rh, Lock Nut; (B) M16, Lock Nut; M16 Rh, Lock Nut; M16 (A) (B) (C), Lock Nut; M16 (Sub For A31869), Lock Nut; M16, (312), Lock Nut; M16 (Sub For Cc31787), Lock Nut; (A) M16, Lock Nut; M16, Lock Nut; M16, (312) M16, Lock Nut; M16, M16, Lock Nut, Lock Nut; M16, M6, Lock Nut; M16 Lh | 4 |
| 19***01 | Screw; (A: With Rotor-Type Pickup) M16 X 110, Screw; M16 X 110 (Sub For 19m8610), Screw; (A: 9550 ( -69***00) 9550sh ( -69***00)) M16 X 110, Screw; (C) M16 X 110, Screw; M16 X 110 (A), Screw; M16 X 110 (Goes Thru Isolation (Cab) Mount), Screw, Screw; (A) M16 X 110, Screw; M16 X 110 (Sub For 19m7495), Screw; (Sub For Cc37586 Appl), Screw; M16 X 110 (A) (B), Screw; M16 X 110 (Hs, Head Marked 10.9) (Sub For (2) 19m8610), Screw; M16 X 110 M16x110, Screw; M16 X 110, Screw; M16 X 110, M16 X 110, Screw; (A: 9550 (69***01- ) 9550sh (69***01- )) M16 X 110, Screw; M16x110, Screw; M16 X 110 Lh, Rh, Screw; (A) M16 X 110, (Use With Starter Weight), Screw; M16 X 110, M16x110, Screw; (Sub For Cc37586) | 4 |
| 34***45 | Spring Pin; (312) 6 X 60mm, Spring Pin; 10x60mm, Spring Pin; 6 X 60 mm, Spring Pin, Spring Pin; 6x60mm, Spring Pin; 6 X 60 mm 6x60mm, Spring Pin; (A) 6 X 60 mm, Spring Pin; 6x60, Spring Pin; 6 X 60 mm (Sub For 34m3872), Spring Pin; 6 X 60 mm 6 X 60 mm | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Rotating Device [C24]
| 12***03 | Lock Washer; 12mm, Lock Washer | 1 |
| 14***31 | Nut; M6, Nut; M12 (D), Nut; M12, Nut; M12m, Nut; 12 mm, Nut; M12 (W/ E63932), Nut; 12 mm (W/ E63932) Key 3, Nut; M12 (For Z45182), Nut; 3/8", Nut; (A: For Exportation) M12, Nut; 12 mm (W/ Dc18663), Nut; M14, Nut; M12, M12, Nut; M12 (Sub For 14m7042) |, Nut; (A) (B) (C), Nut; Ar, M12 (Sub For 14m7042), Nut; (C: For Commandcenter) M12, Nut; 14 mm, Nut; (A) (B) (C) M12, Nut; M12 (Sub For 14m7042), Nut; M12 M12, Nut; 12 mm (W E63932) Key 3, Nut; M12 (W/ E63930), Nut; (A) M12, Nut; 12mm, Nut, Nut; Ar, M12, Nut; M12, (312) M12, Nut; M12 |, Nut; M12, (312), Nut; M12 (W/ Dc18663), Nut; M12 Sub For 14m7275, Nut; 12x1,75, Nut; (A), Nut; M12 (Sub For 14m7066), Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M12, Nut; M12, M8x80, Nut; (C) M12, Nut; M12, Rh, Nut; 12 mm (W/ E63930), Nut; M12 (W/ Dc18661) | 1 |
| 14***68 | Lock Nut; (B: W/ Hydraulic. Trailer Hitch) M12, Lock Nut; M12 (Sub For 14m7275), Lock Nut; (B: With Hydraulic. Trailer Hitch) M12, Lock Nut; (A: For 25 Knives Only) M12, Lock Nut; (A) (B) (C), Lock Nut; (C: Up To Series 2111 (-13397), 2113 (-06***03), 2115 (-06***01)) (D: Up To Series 2117 (-06***01), 2122 (-13423), 2126 (-06***05)) M12, Lock Nut; (A) 12mm, Lock Nut; M12 (Sub For Cc51305), Lock Nut; 14mm, Lock Nut; M12, Lock Nut; (A: Model 9660 For North America Only) M12, Lock Nut; M12 (For Dc35502, Dc41100, Dc47507, Dc54697), Lock Nut; (A) (Sub For A31867), Lock Nut; (A: Triple) (B: Dual) M12, Lock Nut; (D: Components Of Item Dq73362) M12, Lock Nut; (A: With Tow Coupling) M12, Lock Nut; (A: With Front Loader Only) M12, Lock Nut; M12 Lh, Rh, Lock Nut; 12mm (Sub For 43m7005, 43m7006), Lock Nut; (A: For Elc Plus Monitor) M12, Lock Nut; (A: With Pick-Up Hitch And Hydraulic. Center Link) M12, Lock Nut; (A: For Fork-Type Pickup) M12, Lock Nut; M12, M8, Lock Nut; (A) (B) M12, Lock Nut, Lock Nut; (A: For Multicrop Machines) M12, Lock Nut; (A) M12, Lock Nut; (B: With Hydraulic Trailer Hitch) M12, Lock Nut; M12, M12, Lock Nut; (C: With Pick-Up Hitch And Hydraulic. Center Link) M12, Lock Nut; (A: Long Row) M12 (Sub For 14m7512), Lock Nut; (B: For Silage Special Machines) M12, Lock Nut; M12, Lock Nut; M14, Lock Nut; (A) M12 (Sub For A31867), Lock Nut; M12 |, Lock Nut; (Sub For Cc51305), Lock Nut; 12 mm, Lock Nut; M12 Lh, Lock Nut; (A) M14, Lock Nut; (B) M12, Lock Nut; 12mm, Lock Nut; (A), Lock Nut; (E: Starting From Series Number 2109 (07***01-), 2111 (06***01-), 2113 (06***01-), 2115 (06***01-)) (F: Starting From Series Number 2117 (06***01-), 2122 (06***01-), 2126 (06***06-)) M12 2130, Lock Nut; (A: Basic) M12, Lock Nut; 12mm (Sub For 14m5839), Lock Nut; M12 (Sub For 14m5839), Lock Nut; (A: For Rotor-Type Pickup) M12, Lock Nut; (A: Straddle Mount) M12, Lock Nut; M12 (Sub For B30963), Lock Nut; (A: With Rotor-Type Pickup) M12, Lock Nut; (D: With Scv) M12, Lock Nut; M12 M12, Lock Nut; (A: For 14 Knives Only) M12, Lock Nut; (C: With Pick-Up Hitch And Hydraulic Center Link) M12, Lock Nut; M12 2122, 2126, Lock Nut; 12mm (Sub For 43m7006), Lock Nut; M12, Lock Nut; M12 (Sub For A31867), Lock Nut; (B), Lock Nut; M12 M12x40, (Hs=10.9), Lock Nut; M12, (312) M12, Lock Nut; M12 2122, 2126, 2130 | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Telescopic Boom [C18]
| 12***03 | Lock Washer; 12mm, Lock Washer | 2 |
| 14***66 | Nut; M8 (Sub For Er022407, Appl), Nut; (A: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- )) (B: Starting From Series Number 2115 (07***01- ), 2117 (07***01- )) M8, Nut, Nut; M8 (Sub For Er022047 Appl), Nut; M8 2126, Nut; M8 (Sub For 14m7298), Nut; M8, No Usado, Nut; M8 (A), (B), Nut; 10.5x21x2mm, Nut; (A) M8, Nut; (A: 9550 (69***01 - ) 9550sh (69***01 - )) M8, Nut; (A: For Msl) M8, Nut; (B: With Command Arm) M8, Nut; (A) (C) M8, Nut; (B: W/Cab) M8, Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) M8, Nut; (C: With Command Arm) M8, Nut; M8 Not Illustrated, Nut; (A: Only For 50 Km/H) M8, Nut; (B: With Hydraulic Cab Suspension (Hcs)) M8, Nut; (B: For Tractors Without Cab) M8, Nut; (D: Components Of Item Dq73362) M8, Nut; (B: 9550 (70***01- ) 9550sh (70***01- )) M8, Nut; (A: For Pickup 1, 81 M) M8, Nut; (A: Only For North America And Japan) M8, Nut; (A: Region Ii Only) M8, Nut; Ar, M8, Nut; M8 (A), Nut; (A: For 2 Functions) (B: For 2 Functions +1) (C: For 3 Functions) M8, Nut; M8 2113, Nut; (C: (5410) -34***48 (5510) -35***34) M8, Nut; (A: Feeder House Lateral Tilt) M8, Nut; (A: For 9650 Sts (69***01- ) & 9750 Sts (69***01- )) M8, Nut; (B: With Electronic Speed Control) M8, Nut; (C: (5410) -34***47 (5510) -35***27) M8, Nut; (E: Up To Series 2113 ( -06***26), 2115 ( -06***10), 2117 ( -06***15)) (F: Up To Series 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; M8 (A) (B), Nut; (D) M8, Nut; (A: For Rotor-Type Pickup) M8, Nut; M8, With Single Auger With Power Deflector, Nut; (C: Only For 2.0 M Rotor Type Pickup) M8, Nut; M8 Din985, Nut; M8, M8, Nut; (A: For Machines With Hydraulic Brake System) M8, Nut; (A: Without The Largest Diameter Starter Roll) M8, Nut; (C: Also For Super Narrow Version) M8 (Sub For Er022407 Appl), Nut; (A: For Pickup Heavy Duty) M8, Nut; (B: For 6505 Tractors) M8, Nut; M8 (E64256), Nut; M8, (312) M8, Nut; (E: With Electronic Speed Control) M8, Nut; M8 M8 X 1.25, Nut; M8, Nut; (B: For 2 Functions +1) (D: For Gear Shift Switches) M8, Lock Nut; M8, (Sub For J950010, This Application), Nut; M8 (Sub For 14m7273), Nut; 8 mm, Nut; (A) (B) M8, Nut; M8 M8, Nut; M8 (Sub H137328), Nut; (A: Rice Version) M8, Nut; M8 (Sub For L36292 Appl), Nut; M8, (Sub For Es10350), Nut; M10, Nut; M8 (Ord Dc50810), Nut; (A: At170191 Kit, Contains Clamps, Spacer And Hardware) (B: At170190 Kit, Contains Clamps, And Hardware) M8, Nut; (B: For 9650 Sts (70***01- ) & 9750 Sts (70***01- )) M8, Nut; (C) M8, Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M8 M8, Nut; (A: Used In 5615 Hc Too) M8, Nut; M8, Serie 600 Ct 20, Ct 30, Nut; M8 2130, Nut; (A) M8 (Sub For E64256), Nut; M8, 11x21x2mm, Nut; M8 (Sub For Er022407 Appl), Nut; M8 (A) (Sub For Es10350), Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; (A: For 6205 Tractors) (C: Not For Msl) M8, Nut; (C: For 3 Functions) (D: For Gear Shift Switches) M8, Lock Nut; M8, Nut; (A: Mexico) (B: Turkey) M8, Nut; (A: For Fork-Type Pickup) M8, Nut; (A: Used With Optional Double Twine Arm.) M8, Nut; (A: Starting From Series Number 2113 (07***01- ), 2115 (07***01- ), 2117 (07***01- )) (B: Starting From Series Number 2122 (07***01- ), 2126 (07***06- )) M8, Nut; (B: For Pickup 1.41 M) M8, Nut; M8, (312), Nut; (A: For 2 Functions) (B: For 2 Functions + 1) M8, Nut; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) M8, Nut; M8 (Use With T129534), Nut; (A: Only For Pick Up 2 M With Precutter) M8 (Ord Dc50574), Nut; M8 (Sub For Er022408 Appl), Nut; (C: With Hydraulic Cab Suspension (Hcs)) M8, Nut; (B: Without Lateral Tilt) M8, Nut; (C: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- ), 2115 (07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M8, Nut; 8mm, Nut; M8 |, Nut; (A: 5303 ( -Xxxxxx), 5403 ( -00***62).) M8, Nut; M4x6, Nut; (A: Up To Series 2111 ( -06***02), 2113 ( -06***26), 2115 ( -06***10)) (B: Up To Series 2117 ( -06***15), 2122 ( -06***12), 2126 ( -07***05)) M8, Nut; M8 (Sub For At265058), Nut; (B) M8, Nut; M8 M8g, Nut; M8 (Export), Nut; M8 (Sub For E64256), Nut; M8 Lh, Rh, Nut; (A: Used In 5625hc Tractor Too) M8, Nut; (A: 2126, 24 Rows) M8, Nut; (B: Low Profile Cab) M8, Nut; (A: For 1, 81 Meter Pickup) M8, Nut; M8 W/ Hcs-Cab, Nut; M8 (B), Nut; M8 (Sub For E64259), Nut; M8 (Sub For Er024805 Appl), Nut; M8 (Sub For Er047321 Appl), Nut; (A: Components Of Item Dq73362) M8, Nut; (A: For 6205 Tractors) M8, Nut; M8 Nylstop, Nut; Ar M8, Nut; (B: For Electronic Foot Throttle) M8, Nut; (A) 8mm |, Nut; (A: Hi-Crop) M8 | 10 |
| 19***39 | Bolt; (B) M8x20, Bolt; (A: 6068hrw77 - With Four Valve Engines) M8 X 20, Bolt; R.H.,M8x20, Bolt; M8x20,R.H., Bolt; 8mm, Bolt; M8 X 20 Sub For J260820 Or J900820, Bolt; M8 X 20 (Use With H175610), Bolt; M8 X 20 (Plug Holes In Center Floor), Bolt; 8x65mm, Bolt; M8 X 20 (Sub For Ch12338), Bolt; (A: With Four Valve Engines) M8 X 20, Bolt; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) M8 X 20, Bolt; (A: Also For Super Narrow Version) M8 X 20 (Sub For Er020777 Appl), Bolt; M8 X 20 (Sub For Er020778 Appl), Bolt; (B) M8 X 20, Bolt; M8x1.25x20, Bolt; M8 X 20 M8 Hx Screw, Bolt; Ar, M8 X 20, Bolt; M8x20, Bolt; M8 X 20, (Not Pictured), Bolt; M8 X 20 (10.9), Bolt; M8 X 20, M8 X 20, Bolt; M20, Bolt; Rh,M8x20, Bolt; (A) ,M8x20, Bolt; (A), Cap Screw; M8 X 20, (Sub For J900820), Bolt; M8 X 20 (Sub For Er020771 Appl), Bolt; M8x1,25x20, Bolt; M8 X X1.25 X 20, Screw With Washer; (Sub For J020820), Bolt; (B: Cab) M8 X 20, Bolt; M8 X 20 (Sub For Er020777 Appl), Bolt; R.H. M8x20, Bolt; (B: For Germany Only) M8 X 20, Bolt; (A: Upto Sr.No. 5103s-01***61, 5203-00***61.) M8 X 20, Bolt; M8 X 20, (Sub 19m7881), Bolt; Main, Bolt; (A: Starting From Series Number 2113 (07***01- ), 2115 (07***01- ), 2117 (07***01- )) (B: Starting From Series Number 2122 (07***01- ), 2126 (07***06- )) M8 X 20, Bolt; (A: Without Cab) M8 X 20 (Sub For Er020778 Appl), Bolt; M8 X 20, M8x16, Bolt; M8 X 20 Sub For J260820, Bolt; (A: 5303 ( -Xxxxxx), 5403 ( -00***62).) M8 X 20, Bolt; (B: Open-Station) M8 X 20, Bolt; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M8 X 20, Bolt; M8 X 20 (Use With R140924), Bolt; M8 X 20, (Sub For 19m7162), Bolt; M8 X 20 (Also Order 24m7055 ) (Sub For J260820), Bolt; (A) (B) M8x20, Bolt; (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)) M8 X 20, Bolt; (A: With Compressed Air Brakes Only (Order Separately)) M8 X 20, Bolt; M8 X 20 (Sub For J900820), Bolt; M8 X 20, (Sub For Ch11173) (Also Order 12m7065), Bolt; (A: With Mechanical Reverser Control) M8 X 20, Bolt; (A: 2126, 24 Rows) M8 X 20, Bolt; M8 X 20 (Use With R137924), Bolt; (A) 8x20mm, Bolt; M8 X 20 (Sub For J260820), Cap Screw; M8 X 20, Bolt; (A: 5303 (Xxxxxx- ), 5403 (00***63- ), 5503 (00***01- ).) M8 X 20, Bolt; M8 X 20 M8 X 1.25 X 20 - 8.8 Zn, Bolt; M8 X 20, (Use With Az17518), Bolt; (A: Low Seat Position) M8 X 20, Bolt; M8 X 20, 9x17x1,6mm, Bolt; M8 X 20 Hs=10.9, Bolt; (A: Ord Kit Dq64098) M8 X 20, Bolt; M8 X 20, Ross, Bolt; M8 X 20, Bolt; (B: With Cab) M8 X 20 (Sub For Er020778 Appl), Bolt; M8 X 20 (Sub For 19m7425), Bolt; (A: 4045hl480-With Four Valve Engines) M8 X 20, Bolt; M8 X 20 Lh, Bolt; M8 X 1,25 X 20, Bolt; M8 X 20 (Sub For J900820) (J260820 Nla), Bolt; M8 X 20 (European), Cap Screw; M8 X 20, (Sub For J020820 Or 19m7139), Bolt; M8 X 1.25 X 20, Bolt; Lh, M8x20, Bolt; M8 X 20 , Ross, Bolt; M8 X 20, (312), Bolt; M8 X 20 Sub For J900820, Bolt; (Frame To Cushion), Bolt; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M8 X 20, Bolt; M8x12, Bolt; Ar, M8x20, Bolt; M8 X 20 (Sub J900820)( J900820 Nla), Bolt; M8 X 20, (312) M8x20, Bolt; M8 X 20 (918 Rigid And 930 Flex Arg), Bolt; (A: For Vineyard Tractor Version Only) M8 X 20 (10.9), Bolt; M8 X 20mm, Cap Screw; (Sub For J260820 Or J900820), Bolt; Ar M8x20, Bolt; (A: Rice Version) M8 X 20, Bolt; (A: Collarshift Transmission (5220) Sn 42***11- (5320) Sn 43***07-) M8 X 20, Bolt; 8x20mm, Bolt; M8 X 20, (Sub For M800432), Bolt; M8 X20, Bolt; (A) M8x20, Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) M8 X 20, Bolt; M8x20, R.H., Bolt; M8 X 20, (312) M8 X 20, Bolt; (A) (B) M8 X 20, (Sub For M800432), Cap Screw; (Sub For J020820), Bolt; 8 X 20mm, Bolt; Lh M8 X 20, Bolt; M8 X 12, Bolt; M8x16, Bolt; M8x 20, Bolt; 8x1,25x20mm, Bolt; M8 X 20 (Sub For Er020778, Appl), Bolt; M8 X 20, (10.9), Bolt, Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20, Bolt; M8 X 20, For Ca 6300, Bolt; (A: Also For Super Narrow Version) M8 X 20 (Sub For Er020778 Appl), Bolt; (C) M8 X 20, Bolt; M8 X 20 (A), (B), Bolt; (A: Rn Version Only) M8 X 20 (10.9), Bolt; M8 X 20 (A), (B), (Sub For M800432), Bolt; M8 X 20 (Sub For M800432), Bolt; M8 X 20 Sub For J020820, Bolt; (A) (B) M8 X 20, Bolt; M8 X 20 (Sub For Re51239 Or Re71420), Bolt; M8 X 20, Use W/ Az17516 - Az17518, Bolt; M8 X 20, M8x20, Bolt; (Sub For J020820), Bolt; M8 X 20 (A) (Sub For M800432), Bolt; M8x20 (Sub For 19m7162), Bolt; (B: (Xxxxxx- ) 8560-00***91; 8760-00***00; 8960-00***97) M8 X 20, Bolt; M8x25, Bolt; (A: With Compressed-Air Brakes Only (Order Separately)) M8 X 20, Bolt; (B: W/O Cab) M8 X 20, Bolt; (A: Collarshift Transmission (5420) Sn 44***13- (5520) Sn 45***04-) M8 X 20, Bolt; 8 X 20 mm, Bolt; M8 X 20 M8x20, Bolt; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M8 X 20, Bolt; M8 X 20 (A) (B) (C), Bolt; M8 X 20 (A)(Sub For M800432), Bolt; (A) M8 X 20, Bolt; M8 X 20 (Hs=10.9), Bolt; (A: Rice/Corn) M8 X 20, Bolt; (A) M8 X 30, Bolt; M8 X 20 (A), Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M8 X 20 2130, Bolt; M8 X 20 (Sub For Er020777, Appl), Bolt; M8 X 20 (Sub For J260820 ) (Also Order 24m7055), Bolt; M8 X 20 Use With Az17518, Bolt; M8 X 20 (A), (Sub For M800432) | 1 |
John Deere : 640a - Front Loader : 100 Front Equipments : Square Bale Handler - Tongue [C20]
| 12***08 | Lock Washer; (B) 8 mm, Lock Washer; 8 mm, Lock Washer, Lock Washer; Id = 8 mm, Lock Washer; 4 mm, Lock Washer; (A) Id = 8 mm, Lock Washer; 8,070mm, Lock Washer; (A) (B) 8 mm, Lock Washer; Ar, 8 mm, Lock Washer; (A) (B) 8 X 14,8 X 2 mm, Lock Washer; 8mm, Lock Washer; 8 X 14,8 X 2 mm, Lock Washer; A8, Lock Washer; (A) M8, Lock Washer; 8 mm A8, Lock Washer; 8 mm 8 mm, Lock Washer; 8 070mm, Lock Washer; 8 077mm, Lock Washer; (Ord 12m7056), Lock Washer; X, Lock Washer; 8,077mm, Lock Washer; (A) ,8mm, Lock Washer; (A) 8mm, Lock Washer; Ar 8mm, Lock Washer; Ar, 8mm, Lock Washer; (A) 8 mm, Lock Washer; (A: For Usa Only) 8 mm, Lock Washer; (A: Used In 5425 And 5725 Orchard Tractors Too) 8 mm, Lock Washer; (B: For Usa Only) 8 mm, Lock Washer; 8.100 mm, Lock Washer; 8 mm M8, Lock Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8 mm, Lock Washer; 8 mm, 940w/ 343, Lock Washer; M8, Lock Washer; (A: Discharge Spout (High Arc)) 8 mm, Lock Washer; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 8 mm | 10 |
| 14***40 | Nut; M10 |, Nut; M8 (Sub For 14m7137), Nut; M16, Nut; 10mm, Nut; (Sub For 14m7039), Nut; M8, Nut; 10mm (Sub For 14m7039), Nut; M10, (312) M10, Nut; 10 mm, Nut; M10, 3,2x20mm, Nut; (C) M10, Nut; Ar, 10mm, Nut; M10, (312), Nut; (A: For Rice) M10, Nut; M10, Nut; (B) 8 mm, Nut; Ar, M10, Nut; M10 (Ord W/Sb12585100/0), Nut; M10, M10x25, Nut; 12mm, Nut; (D: Components Of Item Dq73362) M10, Nut; M10 (Sub For 14m7273), Nut; M10 Lh, Nut; (A: Rice Version) M10, Nut; (A: W/ Lateral Tilt) M10, Nut, Nut; (A) M8, Nut; M10, M10, Nut; M10, M12x30, Nut; M10, 11x21x2mm, Nut; M10 (Sub For 14m7039), Nut; (A: Rice) M10, Nut; (A) 10mm, Nut; (A) M10, Nut; M10x50, Nut; M10 M10, Nut; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M10, Nut; 10x1,5mm, Nut; (A: 2064 And 2066 Air Conditining With Heat Diffuser) M10, Nut; (A: No Longer Required) M10, Nut; (B) M10 | 2 |
| 19***39 | Bolt; (B) M8x20, Bolt; (A: 6068hrw77 - With Four Valve Engines) M8 X 20, Bolt; R.H.,M8x20, Bolt; M8x20,R.H., Bolt; 8mm, Bolt; M8 X 20 Sub For J260820 Or J900820, Bolt; M8 X 20 (Use With H175610), Bolt; M8 X 20 (Plug Holes In Center Floor), Bolt; 8x65mm, Bolt; M8 X 20 (Sub For Ch12338), Bolt; (A: With Four Valve Engines) M8 X 20, Bolt; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) M8 X 20, Bolt; (A: Also For Super Narrow Version) M8 X 20 (Sub For Er020777 Appl), Bolt; M8 X 20 (Sub For Er020778 Appl), Bolt; (B) M8 X 20, Bolt; M8x1.25x20, Bolt; M8 X 20 M8 Hx Screw, Bolt; Ar, M8 X 20, Bolt; M8x20, Bolt; M8 X 20, (Not Pictured), Bolt; M8 X 20 (10.9), Bolt; M8 X 20, M8 X 20, Bolt; M20, Bolt; Rh,M8x20, Bolt; (A) ,M8x20, Bolt; (A), Cap Screw; M8 X 20, (Sub For J900820), Bolt; M8 X 20 (Sub For Er020771 Appl), Bolt; M8x1,25x20, Bolt; M8 X X1.25 X 20, Screw With Washer; (Sub For J020820), Bolt; (B: Cab) M8 X 20, Bolt; M8 X 20 (Sub For Er020777 Appl), Bolt; R.H. M8x20, Bolt; (B: For Germany Only) M8 X 20, Bolt; (A: Upto Sr.No. 5103s-01***61, 5203-00***61.) M8 X 20, Bolt; M8 X 20, (Sub 19m7881), Bolt; Main, Bolt; (A: Starting From Series Number 2113 (07***01- ), 2115 (07***01- ), 2117 (07***01- )) (B: Starting From Series Number 2122 (07***01- ), 2126 (07***06- )) M8 X 20, Bolt; (A: Without Cab) M8 X 20 (Sub For Er020778 Appl), Bolt; M8 X 20, M8x16, Bolt; M8 X 20 Sub For J260820, Bolt; (A: 5303 ( -Xxxxxx), 5403 ( -00***62).) M8 X 20, Bolt; (B: Open-Station) M8 X 20, Bolt; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M8 X 20, Bolt; M8 X 20 (Use With R140924), Bolt; M8 X 20, (Sub For 19m7162), Bolt; M8 X 20 (Also Order 24m7055 ) (Sub For J260820), Bolt; (A) (B) M8x20, Bolt; (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)) M8 X 20, Bolt; (A: With Compressed Air Brakes Only (Order Separately)) M8 X 20, Bolt; M8 X 20 (Sub For J900820), Bolt; M8 X 20, (Sub For Ch11173) (Also Order 12m7065), Bolt; (A: With Mechanical Reverser Control) M8 X 20, Bolt; (A: 2126, 24 Rows) M8 X 20, Bolt; M8 X 20 (Use With R137924), Bolt; (A) 8x20mm, Bolt; M8 X 20 (Sub For J260820), Cap Screw; M8 X 20, Bolt; (A: 5303 (Xxxxxx- ), 5403 (00***63- ), 5503 (00***01- ).) M8 X 20, Bolt; M8 X 20 M8 X 1.25 X 20 - 8.8 Zn, Bolt; M8 X 20, (Use With Az17518), Bolt; (A: Low Seat Position) M8 X 20, Bolt; M8 X 20, 9x17x1,6mm, Bolt; M8 X 20 Hs=10.9, Bolt; (A: Ord Kit Dq64098) M8 X 20, Bolt; M8 X 20, Ross, Bolt; M8 X 20, Bolt; (B: With Cab) M8 X 20 (Sub For Er020778 Appl), Bolt; M8 X 20 (Sub For 19m7425), Bolt; (A: 4045hl480-With Four Valve Engines) M8 X 20, Bolt; M8 X 20 Lh, Bolt; M8 X 1,25 X 20, Bolt; M8 X 20 (Sub For J900820) (J260820 Nla), Bolt; M8 X 20 (European), Cap Screw; M8 X 20, (Sub For J020820 Or 19m7139), Bolt; M8 X 1.25 X 20, Bolt; Lh, M8x20, Bolt; M8 X 20 , Ross, Bolt; M8 X 20, (312), Bolt; M8 X 20 Sub For J900820, Bolt; (Frame To Cushion), Bolt; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M8 X 20, Bolt; M8x12, Bolt; Ar, M8x20, Bolt; M8 X 20 (Sub J900820)( J900820 Nla), Bolt; M8 X 20, (312) M8x20, Bolt; M8 X 20 (918 Rigid And 930 Flex Arg), Bolt; (A: For Vineyard Tractor Version Only) M8 X 20 (10.9), Bolt; M8 X 20mm, Cap Screw; (Sub For J260820 Or J900820), Bolt; Ar M8x20, Bolt; (A: Rice Version) M8 X 20, Bolt; (A: Collarshift Transmission (5220) Sn 42***11- (5320) Sn 43***07-) M8 X 20, Bolt; 8x20mm, Bolt; M8 X 20, (Sub For M800432), Bolt; M8 X20, Bolt; (A) M8x20, Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) M8 X 20, Bolt; M8x20, R.H., Bolt; M8 X 20, (312) M8 X 20, Bolt; (A) (B) M8 X 20, (Sub For M800432), Cap Screw; (Sub For J020820), Bolt; 8 X 20mm, Bolt; Lh M8 X 20, Bolt; M8 X 12, Bolt; M8x16, Bolt; M8x 20, Bolt; 8x1,25x20mm, Bolt; M8 X 20 (Sub For Er020778, Appl), Bolt; M8 X 20, (10.9), Bolt, Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20, Bolt; M8 X 20, For Ca 6300, Bolt; (A: Also For Super Narrow Version) M8 X 20 (Sub For Er020778 Appl), Bolt; (C) M8 X 20, Bolt; M8 X 20 (A), (B), Bolt; (A: Rn Version Only) M8 X 20 (10.9), Bolt; M8 X 20 (A), (B), (Sub For M800432), Bolt; M8 X 20 (Sub For M800432), Bolt; M8 X 20 Sub For J020820, Bolt; (A) (B) M8 X 20, Bolt; M8 X 20 (Sub For Re51239 Or Re71420), Bolt; M8 X 20, Use W/ Az17516 - Az17518, Bolt; M8 X 20, M8x20, Bolt; (Sub For J020820), Bolt; M8 X 20 (A) (Sub For M800432), Bolt; M8x20 (Sub For 19m7162), Bolt; (B: (Xxxxxx- ) 8560-00***91; 8760-00***00; 8960-00***97) M8 X 20, Bolt; M8x25, Bolt; (A: With Compressed-Air Brakes Only (Order Separately)) M8 X 20, Bolt; (B: W/O Cab) M8 X 20, Bolt; (A: Collarshift Transmission (5420) Sn 44***13- (5520) Sn 45***04-) M8 X 20, Bolt; 8 X 20 mm, Bolt; M8 X 20 M8x20, Bolt; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M8 X 20, Bolt; M8 X 20 (A) (B) (C), Bolt; M8 X 20 (A)(Sub For M800432), Bolt; (A) M8 X 20, Bolt; M8 X 20 (Hs=10.9), Bolt; (A: Rice/Corn) M8 X 20, Bolt; (A) M8 X 30, Bolt; M8 X 20 (A), Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M8 X 20 2130, Bolt; M8 X 20 (Sub For Er020777, Appl), Bolt; M8 X 20 (Sub For J260820 ) (Also Order 24m7055), Bolt; M8 X 20 Use With Az17518, Bolt; M8 X 20 (A), (Sub For M800432) | 10 |
John Deere : 640a - Front Loader : 100 Front Equipments : Telescoping Boom (For Forklift) [C09]
| 34***84 | Spring Pin; (A: Parts In Ae50743 Twine Arm Assembly) 3/16" X 1-1/4", Spring Pin; 3/16" X 1-1/4" ( Sub For 34m7029), Spring Pin; (A) 3/16"X11/4", Spring Pin; 3/16" X 1-1/4" (A), Spring Pin; (A: Parts In Ae50742 Twine Arm Assembly) 3/16" X 1-1/4", Spring Pin; 3/16" X 1-1/4" (Use With Ar78526), Spring Pin; (A) 3/16x11/4, Spring Pin, Spring Pin; 3/16" X 1-1/4", Spring Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 3/16" X 1-1/4", Spring Pin; (B) 3/16"X1-1/4", Spring Pin; 3/16"X1-1/4", Spring Pin; 3/16" X 1-1/4", (Posi-Torq Drive Only), Spring Pin; (A) 3/16"X1-1/4", Spring Pin; 3/16" X 1-1/4" (Posi-Torq Drive Only), Spring Pin; 4,77 X 31,75 mm, Spring Pin; 0,188" X 1,25", Spring Pin; (A) 3/16"X 11/4", Spring Pin; 3/16" X 1-1/4" | 2 |
| A1***75 | Pin Fastener | 2 |
| AW***33 | Secondary Boom; (Sub For Aw19007) | 1 |
70 Hydraulics
John Deere : 640a - Front Loader : 70 Hydraulics : Boom Hydraulic Lines And Hoses [B11]
| 24***28 | Sheave; 10.500 X 20 X 2 mm (Use With Ah205124, Ah205125, Ah205122 Or Ah205123) (Used For Leveling Concave), Sheave; 10,5x21x2mm (Sub For 24m1584), Sheave; 10,500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Use With Ah205119, Ah205120, Ah205117 Or Ah205118)(Concave Leveling), Sheave; 10 mm, Washer; 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Aw22434), Sheave; 10.3 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er023123 Appl), Sheave; 10.5 X 21 X 2mm, Sheave; (A: Fourth Step Option) 10.500 X 20 X 2 mm, Sheave; 11x21x2mm, Sheave; 10.500 X 20 X 2 mm, (Twin Swath), Sheave; 10.500 X 20 X 2 mm 10, 5 X 21 X 2 mm, Sheave; 10.500 X 20 X 2 mm 10.5 X 21 X 2mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er047323 Appl), Sheave; (A: For Hillmaster Only) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For J253110 Or A590110), Sheave; (A: With Hydraulic Cab Suspension (Hcs)) 10.500 X 20 X 2 mm, Washer; 10.500 X 20 X 2 mm, (Sub For Ffsb107142), Sheave; (B: Without Sound Gard Body) 10.500 X 20 X 2 mm, Sheave; 10,5x24x2mm, Sheave; 10.500 X 20 X 2 mm (Sub For 24h1305), Sheave; (A: Collarshift Transmission (5220) Sn -42***10 (5320) Sn -43***06) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm 10.5 X 20 X 2mm, Sheave; (A: Used In 5615 Hc Too) 10.500 X 20 X 2 mm, Sheave; (E: (Xxxxxx-) 7600-00***65; 7700-00***59; 7800-00***05) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079"), Sheave; (A: With 12v, 110ah Battery) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For 24m7040), Sheave; 10.500 X 20 X 2 mm Nlr, Sheave; (A: (6068hn053)) 10.500 X 20 X 2 mm, Sheave; 10.5x21x2.0mm, Sheave; (B: Upto Sr.No. 5410-Xxxxxx, 5610-Xxxxxx.) 10.500 X 20 X 2 mm Rh, Sheave; 10.500 X 20 X 2 mm M6x16, (Hs=10.9), Sheave; (B) 10.500 X 20 X 2 mm, Sheave; (A) 10.5mm, Sheave; 10.5 X 21 X 2.0mm, Sheave; 10,3mm, Sheave; (A: Adjustable Armrest) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er023050 Appl), Sheave; 10,5 X 21 X 2 mm, Sheave; 10.500 X 20 X 2 mm (2 Per Tine), Sheave; 11 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm M10 X 50 (10.9), Sheave; 10,5 X 21 X 2, Sheave; (A: With Extra Hydraulic Oil Reservoir) 10.500 X 20 X 2 mm, Sheave; 10.5x21mm, Sheave; 10,5x21x2,5mm, Sheave; 10.500 X 20 X 2 mm (Nlr), Sheave; 10.500 X 20 X 2 mm Sub For A590110, Sheave; (B) 10,5x21x2mm, Sheave; 10,5mm, Sheave; 10 5mm, Sheave; 10.5 X 21 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er046618 Appl), Sheave; 10,500 X 20 X 2mm, Sheave; 10.500 X 20 X 2 mm (Hi-Crop), Sheave; 10.500 X 20 X 2 mm (Use With Ah205119, Ah205120, Ah205117 Or Ah205118), (Use For Leveling Concave), Sheave; 10mm, Sheave; 10.500 X 20 X 2 mm, (6 Used For 680), Sheave; 10,5 X 21mm, Sheave; (A: Used In 5425hc Tractor Too) 10.500 X 20 X 2 mm, Sheave; 10,5,21x2mm, Sheave; 10.500 X 20 X 2 mm, (Sub For 24h1305, 24m7040), Sheave; 10.500 X 20 X 2 mm (Sub For Er023054, Er023050 Appl), Sheave; 10.500 X 20 X 2 mm (Sub R73639), Washer; 10.500 X 20 X 2 mm, (Sub For Ffsb107142 And A590110), Sheave; 10.500 X 20 2 mm, Sheave; (F: Center Section) 10.500 X 20 X 2 mm 15-Inch 23-, 24-, 31-, And 32-Row, Sheave; (A: For Tractor With 2 Steps, On The Left And On The Right) 10.500 X 20 X 2 mm, Sheave; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 10.500 X 20 X 2 mm, Sheave; (A) 10,5mm, Sheave; 10.500 X 20 X 2 mm, (Use With Ah205124, Ah205125, Ah205122 Or Ah205123) (Use For Leveling Concave), Washer; 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079"), Sheave; 10.5x21x2, Sheave; (B) 10,5 X 20 X 2 mm, Sheave; 10.5mm, Sheave; 10,5 X 20 X 2,0mm, Sheave; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For 12m7096), Sheave; 6,6mm, Sheave; (C: (5210) -32***21 (5310) -33***91) 10.500 X 20 X 2 mm, Sheave; (A: On Serial 622 (07***67-07***71), 625 (07***49-07***52), 630 (07***01-07***15)) 10.500 X 20 X 2 mm, Sheave; (A) 10,5 X 20 X 2 mm, Washer; (Sub For A590110), Sheave; (A: Fuel Tank (30.6 Gallon)) 10.500 X 20 X 2 mm, Sheave; (A), Washer; (Sub For Ffsb107142), Sheave; (A: W/3 Scv W/Hitch W/Power Take-Off) 10.500 X 20 X 2 mm, Sheave; (A: No Longer Required) 10.500 X 20 X 2 mm, Sheave; (A: Starting From Series Number 618 (08***63-), 620 (08***97-)) (B: Starting From Series Number 622 (08***62-), 625 (08***98-), 630 (08***55-)) 10.500 X 20 X 2 mm, Sheave; (A) 10.500 X 20 X 2 mm, Sheave; 10,5 X 21 X 2mm, Sheave; 6,6 mm, Sheave; 10.500 X 20 X 2 mm, 10.5x21x2mm, Sheave; 10.500 X 20 X 2 mm 10.5x21x2mm, Sheave; 10.500 X 20 X 2 mm, (Sub For 24h1323, 24m7040), Sheave; 10.500 X 20 X 2 mm (02***02 Nla), Sheave; 10.500 X 20 X 2 mm (Sub For A590110), Washer; 10.500 X 20 X 2 mm, (Sub For A590110), Sheave; 10.500 X 20 X 2 mm 9000, Sheave; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 10.500 X 20 X 2 mm, Sheave; 10,5 X 20 X 2, Sheave; (A: 2064 And 2066 Air Conditining With Heat Diffuser) 10.500 X 20 X 2 mm, Sheave; 10,5x21x2mm, Sheave; (A) 10.5x21x2mm, Sheave; 10,5 X 20 X 2mm, Sheave; (C) 10.5x21x2mm, Sheave; (C: (5210) -32***23 (5310) -33***88) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (A), Sheave; (B: (6068hn056)) 10.500 X 20 X 2 mm, Sheave; B10,5, Sheave; M10,5, Sheave; 10.500 X 20 X 2 mm, (Sub For Et11539), Sheave; 10.500 X 20 X 2 mm 21 X 10 mm, Sheave; 10.500 X 20 X 2 mm M10, Sheave; (A) 10,5 mm, Sheave; 10.5x21x2mm (Sub For 24h1305, 24m7040), Sheave; (D) 10.500 X 20 X 2 mm, Sheave; Ar, 10,5 mm, Sheave; (A: For Tractor With 3 Steps, On The Left And On The Right) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Used For Leveling Concave), Sheave; 10.500 X 20 X 2 mm (Use With Ah205119, Ah205120, Ah205117 Or Ah205118) (Used For Leveling Concave), Sheave; 10.500 X 20 X 2 mm (Sub A4624), Sheave; 10.500 X 20 X 2 mm 21 X 10mm, Sheave; (A) (B) 10,5 X 20 X 2 mm, Sheave; (A) 10.500x20x2mm, Sheave; (D: Components Of Item Dq73362) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm Sub For A590910, Sheave; 10.500 X 20 X 2 mm 14-Tooth, Sheave; 10.500 X 20 X 2 mm Lh, Washer; 10.500 X 20 X 2 mm, (Sub For Ffsb107142 Or A590110), Sheave; 10.500 X 20 X 2 mm (Use With Ah205124, Ah205125, Ah205122 Or Ah205123) (Use For Leveling Concave), Sheave; (C: W/O Hitch) 10.500 X 20 X 2 mm, Sheave; (A) 10,5 X 21 X 2mm, Sheave; 10", 5x21x2mm, Sheave; 0.413" X 0.787" X 0.079", Sheave; 10.500 X 20 X 2 mm 10, 5 X 20 X 2mm, Sheave; (A) 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079"), Sheave; 10.500 X 20 X 2 mm (Hi-Crop) (Sub R73639), Sheave; 10.500 X 20 X 2 mm (Sub For Er023074), Sheave; (A: Illustrated) 10.500 X 20 X 2 mm, Sheave; (A) 10,5x21x2mm, Sheave; 10.500x20x2mm, Sheave; (C: United Kingdom, France, Germany And Sweden) 10.500 X 20 X 2 mm, Sheave; 10,5 mm, Sheave; (A: On Series 616 (41386-), 618 (41386 - 08***62), 620 (41386 - 08***96)) (B: On Series 622 (41386-07***66), 625 (41386-07***48), 630 (41386-07***00)) (C: On Series 622 (07***72-08***61), 625 (07***53-08***97), 630 (07***16-08***54)) 10.500 X 20 X 2 mm, Sheave, Sheave; 10.500 X 20 X 2 mm (Sub For Er023071 Appl), Sheave; (K) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Use With Ah205119 Or Ah205120) (Use For Leveling Concave), Sheave; 10.500 X 20 X 2 mm (Use With Lva16719), Sheave; (B: With Draft Sensing) 10.500 X 20 X 2 mm, Washer; 10.500 X 20 X 2 mm, (Sub For Ffsb106133), Sheave; (B: 2 Used Per Tine) 10.500 X 20 X 2 mm, Sheave; 10.5x21x2mm (Sub For 24m1584), Sheave; 10.500 X 20 X 2 mm Manual Fore/Aft Only, Sheave; 2x10,5x21mm, Sheave; 10.500 X 20 X 2 mm (Use With 19m7402), Sheave; (A) 10,500 X 20 X 2 mm, Sheave; 10 5x21x2mm, Sheave; (A: For 43.5 Gallon (165l) Fuel Tank) 10.500 X 20 X 2 mm, Sheave; (D: (Xxx-) 8560-00***01;8760-00***01;8960-00***01) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm, (Use With Ah205119, Ah205120, Ah205117 Or Ah205118) (Use For Leveling Concave), Sheave; (Sub For L18519), Sheave; (A: Without R.H. Step) 10.500 X 20 X 2 mm, Sheave; (Sub For 24h1305), Sheave; M10, Sheave; 10,500x20x2mm, Sheave; 10.500 X 20 X 2 mm (Use With Ah205119, Ah205120, Ah205117 Or Ah205118) (Concave Leveling), Sheave; (B: First Outer Wing Row (Bottom Stud)) 10.500 X 20 X 2 mm, Sheave; (A: With Cab) 10.500 X 20 X 2 mm (Sub For Er023071, Appl), Sheave; (A: Collarshift Transmission (5420) Sn -44***12 (5520) Sn -45***03) 10.500 X 20 X 2 mm, Washer, Sheave; 10.500 X 20 X 2 mm (Sub For 24m7178), Sheave; 10.500 X 20 X 2 mm 10, 5x20x2mm, Sheave; 10,5 X 20 X 2 mm, Washer; 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079") (Sub For Ffsb106133), Sheave; (A: With Tier Ii Engine (High Pressure Common Rail)) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm Sub For 12m7096, Sheave; (A: Use Only With Electro-Hydraulic Power Take-Off) 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Ch11469), Sheave; 10.500 X 20 X 2 mm, Sheave; 10.500 X 20 X 2 mm (Sub For Er046905 Appl), Sheave; 10.5x21x2mm, Sheave; 10.500 X 20 X 2 mm As Required Between Brackets, Sheave; 10.500 X 20 X 2 mm (Sub For Er023071, Appl), Sheave; 10.5x20x2mm, Sheave; (A: Include In Ah141672) 10.500 X 20 X 2 mm, Washer; 10.500 X 20 X 2 mm (0.413" X 0.787" X 0.079") (Sub For Ffsb107142), Sheave; (A: For Pin Drawbar Tongue) 10.500 X 20 X 2 mm, Sheave; (A: Used In 5725hc Tractor Too) 10.500 X 20 X 2 mm | 0 |
| AH***93 | Elbow Fitting; 90° (7/8" Male O-Ring X 3/4" Male Jic), Elbow Fitting; 90° (Also Order R26906 ) (Sub For Mg131052), Elbow Fitting; (Sub For Mg131052, Also Order R26906), Elbow Fitting; Adjustable, 90°, Elbow Fitting; 90° (7/8 Male O-Ring To 3/4" Male Jic), Elbow Fitting; 90° 7/8" Male O-Ring X 3/4" Jic Male, Elbow Fitting; 90 Degree, Elbow Fitting; 90 Deg. (Sub For Mg131052, Also Order R26906), Elbow Fitting; 90° 3/4" Jic Male X 7/8" O-Ring, Elbow Fitting; 90 Degree Elbow, Elbow Fitting; (3/4" Male Jic X 7/8" Male O-Ring), Elbow Fitting; 90°, Elbow Fitting, Elbow Fitting; 90° Elbow, Elbow Fitting; 90° Straight (3/4" X 7/8" Thrd Size), Elbow Fitting; 90° 7/8" O-Ring X 3/4" Jic Male, Elbow Fitting; 3/4" X 7/8", Elbow Fitting; 90° 7/8" Male O-Ring X 3/4" Male Jic, Elbow Fitting; 90°, Adjustable, Elbow Fitting; 90°, (Sub For At32332, This Application) | 2 |
| AH***67 | Hydraulic. Quick-Connect C; (C), Hydraulic. Quick-Connect C; (A), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)), Hydraulic. Quick-Connect C; (Includes R21722), Hydraulic. Quick-Connect C; (B: For 7000 Series Tractors), Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; 148 (-04***00), 158 (-04***00), 168, Hydraulic. Quick-Connect C; (Sub For An132350) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; (A: For Connection To 22 Series Combines), Hydraulic. Quick-Connect C; (Sub Re58243, This Application), Hydraulic. Quick-Connect C, Hydraulic. Quick-Connect C; (Iso), Hydraulic. Quick-Connect C; (Use With Ah162618), Hydraulic. Quick-Connect C; Body, Hydraulic. Quick-Connect C; Quick- Disconnect, Hydraulic. Quick-Connect C; (A: For 55 & 60 Series Tractors W/E-H Hitch), Hydraulic. Quick-Connect C; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Hydraulic. Quick-Connect C; (A: For United Kingdom, France, Germany And Sweden), Hydraulic. Quick-Connect C; (A: 9550 (-69***00) 9550sh (-69***00)) (Includes Internal O-Ring), Hydraulic. Quick-Connect C; (Use With Ah153774), Hydraulic. Quick-Connect C; (Standard Coupler), Hydraulic. Quick-Connect C; Female, Hydraulic. Quick-Connect C; (A: Install In 1 Select. Control Valve), Hydraulic. Quick-Connect C; (Sub Aw31338, This Application), Hydraulic. Quick-Connect C; (Includes Internal O-Ring), Hydraulic. Quick-Connect C; Iso Female, Hydraulic. Quick-Connect C; Iso, Hydraulic. Quick-Connect C; Quick-Disconnect, Hydraulic. Quick-Connect C; (Sub For An132350), Hydraulic. Quick-Connect C; (B), Hydraulic. Quick-Connect C; Conversion, For Combines With (Serial No. 62***01-62***00), Hydraulic. Quick-Connect C; (Sub Re58243, This Application) (A), Hydraulic. Quick-Connect C; (A) (Sub Re58243, This Application), Hydraulic. Quick-Connect C; Quick Disconnect | 1 |
John Deere : 640a - Front Loader : 70 Hydraulics : Bucket Cylinder (Nsl) [A16]
John Deere : 640a - Front Loader : 70 Hydraulics : Bucket Cylinder (Sl) [A17]
| AH***67 | Hydraulic Cylinder; (Ord Dc42317) | 2 |
| AH***49 | Hydraulic Cylinder R | 1 |
| AH***50 | Hydraulic Cylinder B; (Use With Ah150037), Hydraulic Cylinder B | 1 |
John Deere : 640a - Front Loader : 70 Hydraulics : Bucket Cylinder [A18]
| 58***74 | Lubrication Fitting; 8x1mm, Lubrication Fitting; M18, Lubrication Fitting; (A: 540 Rpm) (B: 1000 Rpm), Lubrication Fitting; (A) M8, Lubrication Fitting, Lubrication Fitting; (A) M8 X 1, Lubrication Fitting; (A: For 2.00 M Or 2.20 M Hiflow Pickup) (B: For 2.00 M Rotoflow Pickup), Lubrication Fitting; M10, Lubrication Fitting; 8 X 1mm, Lubrication Fitting; (Sub For 81001), Lubrication Fitting; (For Al64120), Lubrication Fitting; (A) (B) M8, Lubrication Fitting; 8mm, Lubrication Fitting; (A), Lubrication Fitting; (D) Straight, (Use With Aw26827), Lubrication Fitting; (A) (B) M8 X 1, Lubrication Fitting; M8x1, Lubrication Fitting; (A: Tractor Serial Number 5605- 08***29-09***75 , 5705- 08***29-), Lubrication Fitting; (For Az39370), Lubrication Fitting; (A: Not For Premium Machines), Lubrication Fitting; H1-M8x1, Lubrication Fitting; M8 X 1 (Sub For Er024258 Appl), Lubrication Fitting; (A: Also For Super Narrow Version) (Sub For Er024258 Appl), Lubrication Fitting; 10mm, Lubrication Fitting; (For Al159368), Lubrication Fitting; (A: With Precutter), Lubrication Fitting; 8 mm, Lubrication Fitting; (Sub For Er024258, Appl), Lubrication Fitting; 8 X 1 mm, Lubrication Fitting; M8 (Use With Al38516), Lubrication Fitting; 8x1,5mm, Lubrication Fitting; M8 (For Al31499 Or Al31500), Lubrication Fitting; Straight, Lubrication Fitting; (A) M8x1, Lubrication Fitting; Ar, M8x1, Lubrication Fitting; (B: Only For Narrow Version) (Sub For Er024258 Appl), Lubrication Fitting; (A: For 2.00 M Or 2.20 M Hiflow Pickup), Lubrication Fitting; M8, Lubrication Fitting; M8 X 1, Lubrication Fitting; A8,4, Lubrication Fitting; M12, Lubrication Fitting; M8 (For Al31497 Or Al31498), Lubrication Fitting; M6x1, Lubrication Fitting; (Sub For Er024258 Appl), Lubrication Fitting; Id= 16mm, Lubrication Fitting; (W/ Al64120), Lubrication Fitting; 8 X 100 mm, Lubrication Fitting; 8 X 100 mm (Sub For 81002) | 1 |
| 58***79 | Lubrication Fitting; 8 mm, Lubrication Fitting, Lubrication Fitting; M8, Lubrication Fitting; M8 X 1, Lubrication Fitting; M8x1 (Sub For 58m5574), Lubrication Fitting; 8mm, Lubrication Fitting; M8x1, Lubrication Fitting; (B: Btb), Lubrication Fitting; 90° | 1 |
| CC***28 | Spacer | 1 |
John Deere : 640a - Front Loader : 70 Hydraulics : Control Levers For Loader Valve [A19]
| 14***72 | Nut; M6, Nut; M6 (Use With H210994), Nut; (A) 6mm, Nut; M24, Nut; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) M6, Nut; M6 M8 Hex, (Sub For Mg100014), Nut; (A: W/Cab) M6, Nut; (C: 2 Used On 2 Spool Loader Valve; 4 Used On 3 Spool Loader Valve) M6, Nut; (B) 6mm, Nut; (A: For Sweden Only) M6, Nut; M6 (Sub For M500505), Nut; (A: With 2-Post Roll Gard) M6, Nut; (A: 9020t (90***00 - 90***00)(90***03 -)), Nut; (C: 2 Used On 2-Spool Valve, 3 Used On 3-Spool Valve) M6, Nut; M6 (Use With Re69391), Nut; (Sub For Ch12389), Nut; (A: 2-Post Roll Gard Low Profile) M6, Nut; (A: (-Xxxxxx) 8560-00***90; 8760-00***99; 8960-00***96) M6, Nut; For X495,X595, Nut; M6 Not Illustrated, Nut; (A: For Cab Tractors (Xxxxxx-)) M6, Nut; (A: 2 Used With 2 Spool Control Valve; 3 Used With 3 Spool Control Valve) M6, Nut; (A: If Equipped) M6, Nut; (B: (Xxxxxx-) 8560-00***04; 8760-00***52; 8960-00***15) M6, Nut; (C: 2 Used On 2 Function Loader Valve, 4 Used On 3 Function Loader Valve) M6, Nut; M6 (10.9), Nut; M6 (A), Nut; M6, (Sub 14m7273, This Application), Nut; X M6, Nut; M6, (Sub 14m7273) This Application Only; 4-Row Wide, Nut, Nut; M5, (Sub For Ch17809), Nut; M6, (Hs, Head Marked 10.9), Nut; (C: 2 Used On 2-Spool Valve, 4 Used On 3-Spool Valve.) M6, Nut; (A: 24r20) (B: 31/32r15) (C) M6, Nut; M6 (Sub For M500605), Nut; M6 (Sub For Er022111 Appl), Nut; (Sub For Ffsb107927), Nut; (C), Nut; (B: With 4-Post Roll Gard) M6, Nut; (B: European Version) M6, Nut; (A) (B) M6, Nut; M6, (Use With At103789), Nut; M6, (Australia And New Zealand Units Use 4 Per), Nut; (A: Open Operator'S Station) M6, Nut; M6, (Sub For Ffsb107927), Nut; (A: With Air Trailer Brake System) M6, Nut; (A: 8020w (1000 - 10000)(14680 -)) M6, Nut; (A: With Rear Fenders (Shell Type)) M6, Nut; M6, (Sub For Ffsb107184), Nut; (B: With Rops) M6 (Sub For Er022110, Appl), Nut; M6 (Sub For R11278, This Application), Nut; (B: Also For With Creeper Transmission, Syncroplus) M6, Nut; (E), Nut; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) M6, Nut; M6, (Sub For Ch17809), Nut; (A: (Pst) (-Xxxxxx) 7600-00***71; 7700-00***39; 7800-01***05) (B: (Powrquad) (-Xxxxxx) 7600-00***73; 7700-00***39; 7800-01***99) M6, Nut; M6 Syncroplus, Nut; 6mm, Nut; M6 Rh, Nut; (Sub For M500605), Nut; (C: 2 Used On 2 Spool Valve; 4 Used With 3 Spool Valve) M6, Nut; M6 M6 X 1, Nut; (A), Nut; M6 (Use With Re50374), Nut; (C) M6, Nut; M6 Sub For 12m7006, Nut; (D) M6, Nut; M6 Lh, Nut; (B) M6, (Use With R93022 Or R91227) (Not Used With W40616), Nut, Nut; M6 Sub For J231106, Nut; M6 (F), Nut; M6 (Sub For Pe993509), Nut; M6 (E), Nut; M6 Sub For M500605, Nut; M6 M6, Nut; 6mm (Sub For 14m7058), Nut; (A: Park Lock) (B: W/ Cab) (D: W/ Lh Reverser) M6, Nut; M8, Nut; M6 (Sub For Mg100014), Nut; (A: Park Lock) (B: W/Cab) (D: W/ L.H. Reverser) M6, Nut; M6, (Use With H210994), Nut; M6 (650 Buck Auto Ex), Nut; (Sub For C211100022), Nut; 6x1mm (Sub For 14m3242), Nut; M6, M6, Nut; M6, (Sub For Ffsb108284 And 14m7297), Nut; M6 (J), Nut; 6 mm, Nut; M6 Powrreverser, Nut; M6 (Pst), Nut; M6 (2nd Scv), Nut; M6 (3rd Scv), Nut; M6 (Sub For Er022110 Appl), Nut; (A: 7220 (01***51-)) M6, Nut; (A: (Pst) (-Xxxxxx) 7600-00***83; 7700-00***64; 7800-01***79) (B: (Powrquad) (-Xxxxxx) 7600-00***58; 7700-00***35; 7800-01***86) M6, Nut; M6, (Also Order 12m7006), Nut; (A: With Command Arm) M6, Nut; (A: Park Lock) (C: W/ L.H. Reverser) M6, Nut; M6 (Use With Re197943), Nut; M6 Up, Nut; (A) 6mm |, Nut; M6 (Use With Re507685), Nut; M6 (H), Nut; (B: With 4-Post Roll Gard) M6 M6, Nut; M6 (Use With R503345 Or Se500364), Nut; M6 (European), Nut; (A) M6, (Sub For M500605), Nut; M6, (Sub For M500605), Nut; (A: With 12v, 110ah Battery) M6, Nut; M6, (3015df106), Nut; (B) M6, Nut; M6, Nut; (C: 2 Used For 2 Spool Loader Valve; 3 Used For 3 Spool Loader Valve) M6, Nut; M6 (Sub For L111877), Nut; M6 (3/8"), Nut; M6, (Also Order 12m7006) (Sub For Ch11984), Nut; M6 (A) (European), Nut; M6, (Sub 14m7273) This Application Only, Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) M6, Nut; (A) M6, Nut; M6 Powrquad | 0 |
| 14***93 | Lock Nut; M10, Lock Nut; M10, (Sub 14m7520) | 1 |
| 19***62 | Cap Screw; M12 X 30, Cap Screw; (A: From Sr.No.5103e-00***54, 5103-01***65, 5103s-01***62, 5203-00***62, 5104/5204-00***01, 5038d-00***01.) M8 X 16, Cap Screw; M8 X 16 M8x16 (8.8), Cap Screw; M8 X 16, M8x80, Cap Screw; (A: W/ Stationary Right-Hand Glass) M8 X 16, Cap Screw; M8 X 16 Sub For J010816, Cap Screw; M8 X 16, (Use With Ce18934), Cap Screw; M8 X 16 (Torque = 27 N.M (20 Ft-Lb)), Cap Screw; (C: With Fwd-Axle With Tls) M8 X 16, Cap Screw; M8x16 (For Al70298), Cap Screw; M8x16,L.H., Cap Screw; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M8 X 16 For Heavy Duty Transmission, Cap Screw; (B: Only For Loader With Suspension) M8 X 16, Cap Screw; M8 X 16, (Sub For J900816), Cap Screw; 8 X 16mm, Cap Screw; (B: With Fwd-Axle With Tls) M8 X 16, Cap Screw; M8x18, Cap Screw; (For Al70298), Cap Screw; (A: (6068hn053)) M8 X 16, Cap Screw; M8 X 16, (Sub For 43***22, Along With 24m7036 And 12m7065), Cap Screw; M8 X 16 Use With Al176965, Cap Screw; (A: Control For Grapple) M8 X 16, Cap Screw; M8 X 16 (Sub For J900816), Cap Screw; M8 X 16 (10.9), Cap Screw; M8 X 16 (Use With Ah96317), Cap Screw; M8 X 16 Lh, Rh, Cap Screw; 8x18mm, Cap Screw, Cap Screw; M8 X 16 (For Axe12941), Cap Screw; M8 X 16 Sub For J020816, Cap Screw; M8 X 16 Sub For Thj970816; Sub For J952010, Cap Screw; (A: Used In 5415 And 5715 Orchard Tractors) M8 X 16, Cap Screw; 8x1,25x12mm (Sub For 19m3127), Cap Screw; (A: Upto Sr.No. 5103s-01***61, 5203-00***61.) M8 X 16, Cap Screw; M8 X 16 Sub For J050816, Cap Screw; M8 X 16 M8x16, Cap Screw; (B: For Pickup 1.41 M) M8 X 16, Cap Screw; (B: Without Air Conditioning System / With Air Compressor) M8 X 16, Cap Screw; M8 X 16 (European), Cap Screw; (Sub For J900816), Cap Screw; 8x16mm, Cap Screw; (B) M8x16, Cap Screw; 8x15mm, Cap Screw; M8 X 16 Lh. Rh, Cap Screw; (A: Used In High Clearance Tractors) M8 X 16, Cap Screw; M8 X 16 (Sub For J260816) (Also Order 24m7055), Cap Screw; (A) (B) M8 X 16, Cap Screw; M8 X 16 Sub For J900825, Cap Screw; M8 X 16, (312) M8x16, Cap Screw; L.H. M8x16, Cap Screw; M6 X 16, Cap Screw; M8 X 16 (Includes Ch15002), Cap Screw; M8 X 16 Sub For J260814, Cap Screw; (B) M8 X 16, Cap Screw; M8x55, Cap Screw; (A: Without Air Conditioning System / With Air Compressor) M8 X 16, Cap Screw; M8 X 16, (Sub 19m7162 And 12m7065), Cap Screw; M8 X 16, (Sub For 43***22, Along 12m7065), Cap Screw; (A: From Sr.No. 5103s-01***62, 5203-00***62, 5104/5204/5038d-00***01.) M8 X 16, Cap Screw; M8 X 25, Cap Screw; (A: For Float Position/Boom Suspension Option) M8 X 16, Cap Screw; M8 X 16 (For Al176965), Cap Screw; (A: Collarshift Transmission (5220) Sn 42***11- (5320) Sn 43***07-) M8 X 16, Cap Screw; M8 X 16 W/ Mechanical Front Wheel Drive, Cap Screw; (C: Without Air Conditioning System / With Air Compressor) M8 X 16, Cap Screw; M8 X 16 (Hs=10.9), Cap Screw; (A: With Fwd-Axle With Tls) M8 X 16, Cap Screw; M8 X 16 Torque = 27 N.M (20 Ft-Lb), Cap Screw; (D: Without Air Conditioning System / With Air Compressor) M8 X 16, Cap Screw; M8 X 16 (Sub For J260816), Cap Screw; M8 X 16 (Sub For J901030, Cap Screw; (A) (Use With N278931 Gear Case), Cap Screw; 8x16x1,25mm, Cap Screw; M8 X 15 (Sub For 19m7084), Cap Screw; M8 X 55, Cap Screw; M8 X 16 (1000 Rpm Only), Cap Screw; (A) 8x16mm, Cap Screw; M8 X 16 (Use With Ce18934), Cap Screw; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M8 X 16 For Light Duty Transmission, Cap Screw; (A: With Elektr. Reverser Control) M8 X 16, Cap Screw; M8 X 16, (Sub For At214308 Or 43***22, Along With 24m7162 And 12m7065), Cap Screw; M8 X 16 (Sub For J900816) (J260816 Nla), Cap Screw; M8 X 16 (Sub For J900814), Cap Screw; M8 X 16 (For Al119373), Cap Screw; M8 X 16 Hs=10.9, Cap Screw; M8x25, Cap Screw; (A: Collarshift Transmission (5420) Sn 44***13- (5520) Sn 45***04-) M8 X 16, Cap Screw; (A: Used In High Clearance Tractors Too) M8 X 16, Cap Screw; (A: Used With 3 Spool Loader Control Valve) M8 X 16, Cap Screw; (A: Used In 5425 And 5725 Orchard Tractors Too) M8 X 16, Cap Screw; M8x16, Cap Screw; M8 X 16 Sub For J900814, Cap Screw; M8x16, L.H., Cap Screw; M8 X 16, (For Al70298), Cap Screw; M8 X 16 (Rh), Cap Screw; 8x1.25x12mm (Sub For 19m3123), Cap Screw; M8 X 18, Cap Screw; M8 X 16 Rh, Cap Screw; M8 X 16 (8.8), Cap Screw; M8 X 16 (Sub For (1) J900816)(Not Illustrated), Cap Screw; M8 X 16 (J260814 Nla), Cap Screw; M8x15, Cap Screw; (A: Engine With 2 Thermostats) M8 X 16, Cap Screw; M8 X 16, M8x16, Cap Screw; M8 X 16, M8 X 16, Cap Screw; (A: For 1, 81 Meter Pickup) M8 X 16, Cap Screw; M8 X 16 (Also Order 24m7055) (Sub For J260816, J900816), Cap Screw; (A: Rice/Corn) M8 X 16, Cap Screw; M8 X 16 Pq/Pst, Cap Screw; M8 X 16, (Sub For Ffsb107125), Cap Screw; (A: With Option Transmission Housing) M8 X 16, Cap Screw; M8 X 15, Cap Screw; M8 X 16, Cap Screw; (D: (-X012752) & (-X026220) & (-X014034)) M8 X 16, Cap Screw; (A: Red Warning Light Assembly) M8 X 16, Cap Screw; M8 X 16, (Sub For Ffsb107144 Or 43***22, Along With 24m7036 And 12m7065), Cap Screw; (A: Only For North America And Japan) M8 X 16, Cap Screw; M8 X 16 (For Al110920), Cap Screw; (A: With Electrical Reverser Control) M8 X 16, Cap Screw; M8 X 16 (Sub For 19m7139), Cap Screw; (A) M8 X 15, Cap Screw; M8x1,25x16, Cap Screw; M8 X 20, Cap Screw; (A: 3-Spool Valve) M8 X 16, Cap Screw; M8 X 16, (Use With At103789), Cap Screw; (A: Collarshift Transmission (5420) Sn 44***13- (5520) Sn 45***04-) M8 X 16 (Hs=10.9), Cap Screw; M8 X 16 M8 X 16, Cap Screw; (A: For Loader Valve With 3 Functions) M8 X 16, Cap Screw; M8 X 16, (Sub For At214308 Or 43***22, Along With 24m7036 And 12m7065), Cap Screw; (A) M8x16, Cap Screw; (A: Collarshift Transmission (5220) Sn 42***11- (5320) Sn 43***07-) M8 X 16 (Hs=10.9), Cap Screw; M8 X 16 (Sub For Er020776 Appl), Cap Screw; (A) M8x18, Cap Screw; (A) M8 X 16, Cap Screw; M8 X 16 (A), Cap Screw; M8 X 16 Sub For J900816, Cap Screw; M8 X 16, Cap Screw; (A), Cap Screw; M8 X 16, Full Thread, Cap Screw; (A: For Pickup 1, 81 M) M8 X 16, Cap Screw; M8 X 16 (Sub For J901025), Cap Screw; M8 X 16, (312), Cap Screw; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M8 X 16 | 1 |
John Deere : 640a - Front Loader : 70 Hydraulics : Hydraulic Circuit - One Way Self-Level Valve (Nsl) [B07]
| 19***39 | Bolt; (B) M8x20, Bolt; (A: 6068hrw77 - With Four Valve Engines) M8 X 20, Bolt; R.H.,M8x20, Bolt; M8x20,R.H., Bolt; 8mm, Bolt; M8 X 20 Sub For J260820 Or J900820, Bolt; M8 X 20 (Use With H175610), Bolt; M8 X 20 (Plug Holes In Center Floor), Bolt; 8x65mm, Bolt; M8 X 20 (Sub For Ch12338), Bolt; (A: With Four Valve Engines) M8 X 20, Bolt; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) M8 X 20, Bolt; (A: Also For Super Narrow Version) M8 X 20 (Sub For Er020777 Appl), Bolt; M8 X 20 (Sub For Er020778 Appl), Bolt; (B) M8 X 20, Bolt; M8x1.25x20, Bolt; M8 X 20 M8 Hx Screw, Bolt; Ar, M8 X 20, Bolt; M8x20, Bolt; M8 X 20, (Not Pictured), Bolt; M8 X 20 (10.9), Bolt; M8 X 20, M8 X 20, Bolt; M20, Bolt; Rh,M8x20, Bolt; (A) ,M8x20, Bolt; (A), Cap Screw; M8 X 20, (Sub For J900820), Bolt; M8 X 20 (Sub For Er020771 Appl), Bolt; M8x1,25x20, Bolt; M8 X X1.25 X 20, Screw With Washer; (Sub For J020820), Bolt; (B: Cab) M8 X 20, Bolt; M8 X 20 (Sub For Er020777 Appl), Bolt; R.H. M8x20, Bolt; (B: For Germany Only) M8 X 20, Bolt; (A: Upto Sr.No. 5103s-01***61, 5203-00***61.) M8 X 20, Bolt; M8 X 20, (Sub 19m7881), Bolt; Main, Bolt; (A: Starting From Series Number 2113 (07***01- ), 2115 (07***01- ), 2117 (07***01- )) (B: Starting From Series Number 2122 (07***01- ), 2126 (07***06- )) M8 X 20, Bolt; (A: Without Cab) M8 X 20 (Sub For Er020778 Appl), Bolt; M8 X 20, M8x16, Bolt; M8 X 20 Sub For J260820, Bolt; (A: 5303 ( -Xxxxxx), 5403 ( -00***62).) M8 X 20, Bolt; (B: Open-Station) M8 X 20, Bolt; (B: (Single Blow Systems W/Aa38545 Valve) 7000, 8000, 9000 Ser.) M8 X 20, Bolt; M8 X 20 (Use With R140924), Bolt; M8 X 20, (Sub For 19m7162), Bolt; M8 X 20 (Also Order 24m7055 ) (Sub For J260820), Bolt; (A) (B) M8x20, Bolt; (E: Single Blower Systems W/ Aa38545 Valve (6000 & 7000 Ser)) M8 X 20, Bolt; (A: With Compressed Air Brakes Only (Order Separately)) M8 X 20, Bolt; M8 X 20 (Sub For J900820), Bolt; M8 X 20, (Sub For Ch11173) (Also Order 12m7065), Bolt; (A: With Mechanical Reverser Control) M8 X 20, Bolt; (A: 2126, 24 Rows) M8 X 20, Bolt; M8 X 20 (Use With R137924), Bolt; (A) 8x20mm, Bolt; M8 X 20 (Sub For J260820), Cap Screw; M8 X 20, Bolt; (A: 5303 (Xxxxxx- ), 5403 (00***63- ), 5503 (00***01- ).) M8 X 20, Bolt; M8 X 20 M8 X 1.25 X 20 - 8.8 Zn, Bolt; M8 X 20, (Use With Az17518), Bolt; (A: Low Seat Position) M8 X 20, Bolt; M8 X 20, 9x17x1,6mm, Bolt; M8 X 20 Hs=10.9, Bolt; (A: Ord Kit Dq64098) M8 X 20, Bolt; M8 X 20, Ross, Bolt; M8 X 20, Bolt; (B: With Cab) M8 X 20 (Sub For Er020778 Appl), Bolt; M8 X 20 (Sub For 19m7425), Bolt; (A: 4045hl480-With Four Valve Engines) M8 X 20, Bolt; M8 X 20 Lh, Bolt; M8 X 1,25 X 20, Bolt; M8 X 20 (Sub For J900820) (J260820 Nla), Bolt; M8 X 20 (European), Cap Screw; M8 X 20, (Sub For J020820 Or 19m7139), Bolt; M8 X 1.25 X 20, Bolt; Lh, M8x20, Bolt; M8 X 20 , Ross, Bolt; M8 X 20, (312), Bolt; M8 X 20 Sub For J900820, Bolt; (Frame To Cushion), Bolt; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M8 X 20, Bolt; M8x12, Bolt; Ar, M8x20, Bolt; M8 X 20 (Sub J900820)( J900820 Nla), Bolt; M8 X 20, (312) M8x20, Bolt; M8 X 20 (918 Rigid And 930 Flex Arg), Bolt; (A: For Vineyard Tractor Version Only) M8 X 20 (10.9), Bolt; M8 X 20mm, Cap Screw; (Sub For J260820 Or J900820), Bolt; Ar M8x20, Bolt; (A: Rice Version) M8 X 20, Bolt; (A: Collarshift Transmission (5220) Sn 42***11- (5320) Sn 43***07-) M8 X 20, Bolt; 8x20mm, Bolt; M8 X 20, (Sub For M800432), Bolt; M8 X20, Bolt; (A) M8x20, Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) M8 X 20, Bolt; M8x20, R.H., Bolt; M8 X 20, (312) M8 X 20, Bolt; (A) (B) M8 X 20, (Sub For M800432), Cap Screw; (Sub For J020820), Bolt; 8 X 20mm, Bolt; Lh M8 X 20, Bolt; M8 X 12, Bolt; M8x16, Bolt; M8x 20, Bolt; 8x1,25x20mm, Bolt; M8 X 20 (Sub For Er020778, Appl), Bolt; M8 X 20, (10.9), Bolt, Bolt; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) M8 X 20, Bolt; M8 X 20, For Ca 6300, Bolt; (A: Also For Super Narrow Version) M8 X 20 (Sub For Er020778 Appl), Bolt; (C) M8 X 20, Bolt; M8 X 20 (A), (B), Bolt; (A: Rn Version Only) M8 X 20 (10.9), Bolt; M8 X 20 (A), (B), (Sub For M800432), Bolt; M8 X 20 (Sub For M800432), Bolt; M8 X 20 Sub For J020820, Bolt; (A) (B) M8 X 20, Bolt; M8 X 20 (Sub For Re51239 Or Re71420), Bolt; M8 X 20, Use W/ Az17516 - Az17518, Bolt; M8 X 20, M8x20, Bolt; (Sub For J020820), Bolt; M8 X 20 (A) (Sub For M800432), Bolt; M8x20 (Sub For 19m7162), Bolt; (B: (Xxxxxx- ) 8560-00***91; 8760-00***00; 8960-00***97) M8 X 20, Bolt; M8x25, Bolt; (A: With Compressed-Air Brakes Only (Order Separately)) M8 X 20, Bolt; (B: W/O Cab) M8 X 20, Bolt; (A: Collarshift Transmission (5420) Sn 44***13- (5520) Sn 45***04-) M8 X 20, Bolt; 8 X 20 mm, Bolt; M8 X 20 M8x20, Bolt; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) M8 X 20, Bolt; M8 X 20 (A) (B) (C), Bolt; M8 X 20 (A)(Sub For M800432), Bolt; (A) M8 X 20, Bolt; M8 X 20 (Hs=10.9), Bolt; (A: Rice/Corn) M8 X 20, Bolt; (A) M8 X 30, Bolt; M8 X 20 (A), Bolt; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) M8 X 20 2130, Bolt; M8 X 20 (Sub For Er020777, Appl), Bolt; M8 X 20 (Sub For J260820 ) (Also Order 24m7055), Bolt; M8 X 20 Use With Az17518, Bolt; M8 X 20 (A), (Sub For M800432) | 4 |
| 19***84 | Screw; M8 X 55 (Sub For J900855), Screw; M8 X 55 Sub For J010855, At131308, Screw; M8 X 55 2113, Screw; (A: Only For 50 Km/H) M8 X 55, Screw; M8 X 55, Danfoss, Cap Screw; M8 X 55, (Sub For J010855, At131308), Screw; (A: For Italy Only) M8 X 55 (Sub For Er020802 Appl), Screw; (A) M8 X 55, Screw; M8 X 55 (For Dc35394), Screw; M8 X 55 (A) (Sub For Es10346), Screw; M8 X 55 2130, Screw; (A: For Msl) M8 X 55, Screw; M8x55mm, Screw; (A: For Italy Only) M8 X 55 (Sub For Er020802 Appl), Screw; M8 X 55 2126, Screw; M8 X 55 (Hs, Head Marked 10.9), Screw; 8x55mm, Screw, Screw; M8x55, Screw; M8 X 55, Screw; (C: Starting From Series Number 2109 (07***01- ), 2111 (07***01- ), 2113 (07***01- ), 2115 (07***01- )) (D: Starting From Series Number 2117 (07***01- ), 2122 (07***01- ), 2126 (07***06- )) M8 X 55, Screw; M8 X 55 (Sub For Er020802 Appl), Screw; M8 X 55 Sub For J010855, Screw; M8 X 30 (Sub For 19m7039), Screw; M8 X 55 M8x55, Screw; (C: Only For 2.0 M Rotor Type Pickup) M8 X 55, Screw; M8 X 55, (Sub For Es10346), Screw; M8 X 55 (For Dc35156, Dc35394) | 2 |
| 24***07 | Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 8.400 X 24 X 2 mm, Washer; (A: With Net Coveredge) 8.400 X 24 X 2 mm (For 19m7868), Washer; 8.400 X 24 X 2 mm To Retain M8 Bolts, Washer; (A: Used With Optional Double Twine Arm.) 8.400 X 24 X 2 mm, Washer; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 8.400 X 24 X 2 mm, Washer; (G: Mc1 Cab) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm 20 Ft Use With The Auger, Washer; 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm Nlr, Washer; (A) 8,4x25x2mm, Washer; (G) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, (2701,9701), Washer; (A: For 9650 (69***68- ) & 9750 (69***58- )) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (Rice Only), Washer; (B: Without Net Wrapping) 8.400 X 24 X 2 mm, Washer; (A: ( -Xxxxxx) 7600-00***85; 7700-00***79; 7800-00***49) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, Use With The 20ft Auger, Washer; 8,4mm, Washer; 8.400 X 24 X 2 mm, (Europe), Washer; 8.400 X 24 X 2 mm, Washer; (B), Washer; 8.400 X 24 X 2 mm (A) Rubber, Washer; 8.400 X 24 X 2 mm (Used On Line Straw Chopper), Washer; (A) 8,4mm |, Washer; 8,4 X 24 X 2 mm (Sub For 24m7055), Washer; 8,4x25x2, Washer; 8.400 X 24 X 2 mm (Corn Only), Washer; 8.400 X 24 X 2 mm 8.4x24x2mm, Washer; 8.400 X 24 X 2 mm (A)(B), Washer; 8.400 X 24 X 2 mm (913 - 2 Used; 915 - 4 Used; 918 - 6 Used; 920, 922, 925, 930 - 8 Used), Washer; 8.400 X 24 X 2 mm (Use With 37m7096), Washer; 8.400 X 24 X 2 mm (Corn And Rice Only), Washer; 8.400 X 24 X 2 mm (Sub R230227), Washer; (A: W/ Hitch) (C) 8.400 X 24 X 2 mm, Washer; (C: Mc1 Cab) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm Rh, Washer; 8.400 X 24 X 2 mm, (2) R.H. Side (1) L.H. Side, Washer; 8.400 X 24 X 2 mm, (Hb-225), Washer; (B: Tss Transmission) 8.400 X 24 X 2 mm, Washer; 8,4x25mm, Washer; 8.400 X 24 X 2 mm (0.331" X 0.945" X 0.079"), Washer; Auger Slowdown, Washer; 8.400 X 24 X 2 mm (Sub For 24m7055), Washer; 8.400 X 24 X 2 mm, 20ft. Auger, Washer; 8.400 X 24 X 2 mm (A), (B), Washer; (A: Cab (47***01- ), Straddle Mount (46***01- )) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, (Also Order T17094, 19h1875, 14h785 And 12h303), Washer; 8.400 X 24 X 2 mm, (Sub For Ffsb114987), Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm 20', Washer; (A: 9550 (69***01- ) 9550sh (69***01- )) 8.400 X 24 X 2 mm, Washer; (A: 9550 ( -69***00) 9550sh ( -69***00)) 8.400 X 24 X 2 mm, Washer; (A: For 360 Mower) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (B), Washer; 0.331" X 0.945" X 0.079", Washer; 8.400 X 24 X 2 mm Use With The 20ft Auger, Washer; (A: Hitch) 8.400 X 24 X 2 mm, Washer; (A: Mexico) (B: Turkey) 8.400 X 24 X 2 mm, Washer; (A: Not For Hillmaster) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, Use With Rotary Air Screen Only, Washer; 8.400 X 24 X 2 mm M8, Washer; (B: For Rice) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm, (Gas), Washer; 8.400 X 24 X 2 mm 8mm, Washer; (A) (B) 8.400 X 24 X 2 mm, Washer, Washer; 8.400 X 24 X 2 mm L.H., Washer; (A) 8.400 X 24 X 2 mm, Washer; 8,4x25x2mm, Washer; 8.400 X 24 X 2 mm (A), Washer; (C: Starting From Series Number 2109 (07***01- ), 2111 (06***01- ), 2113 (06***04- ), 2115 (06***02- )) (D: Starting From Series Number 2117 (06***02- ), 2122 (06***01- ), 2126 (06***06- )) 8.400 X 24 X 2 mm 2130, Washer; (A: For 9650 (69***01- ) & 9750 (69***01- )) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (Europe), Washer; (B: W/ Regular Drawbar) (C) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm Front, Washer; (B: For 370 Mower) 8.400 X 24 X 2 mm, Washer; (A: Note; 9550 (70***01- ) 9550sh (70***01- )) 8.400 X 24 X 2 mm, Washer; 8x24x2mm, Washer; 8.4 X 24 X 2 mm, Washer; (F) 8.400 X 24 X 2 mm, Washer; (C: For 390 Mower) 8.400 X 24 X 2 mm, Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (For Rice Only), Washer; (F: Mc1 Cab) 8.400 X 24 X 2 mm, Washer; 8.4x24x2mm, Washer; (A) 8,4mm, Washer; (C) 8.400 X 24 X 2 mm, Washer; 0.331" X 0.945" X 0.079", (7 Nominal), Washer; 25 X 8,4 X 2 mm, Washer; (C: Up To Series 2111 ( -13397), 2113 ( -06***03), 2115 ( -06***01)) (D: Up To Series 2117 ( -06***01), 2122 ( -13423), 2126 ( -06***05)) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm (0.331" X 0.945" X 0.079") Auger Slowdown, Washer; 8.400 X 24 X 2 mm (Not On 930 Flex Arg), Washer; 8,4 X 24 X 2 mm, Washer; 8,4x24x2mm, Washer; 8 4x25x2mm, Washer; 8,4x25x2mm (Sub For L56238 Appl), Washer; 8.400 X 25 X 2mm, Washer; 8.400 X 24 X 2 mm (1293), Washer; (B: For Germany Only) 8.400 X 24 X 2 mm, Washer; (A: Only For North America And Japan) 8.400 X 24 X 2 mm, Washer; (A: With Net Coveredge) 8.400 X 24 X 2 mm, Washer; 8.400 X 24 X 2 mm 8.400 X 25 X 2 mm, Washer; 8.400 X 24 X 2 mm Use With Wiring Harness Retainers, Washer; 8.400 X 24 X 2 mm Use With The 17 And 20ft Augers, Washer; 8.400 X 24 X 2 mm (All Models Except 930 Flex Arg) | 4 |
John Deere : 640a - Front Loader : 70 Hydraulics : Hydraulic One Way Self-Level Valve [B03]
| AT***28 | Fitting Plug | 1 |
| AW***75 | Valve | 1 |
| AW***43 | Seal Kit | 1 |
John Deere : 640a - Front Loader : 70 Hydraulics : Lift Cylinder Lockout Valve Attachment (France) [B05]
| 14***72 | Nut; M6, Nut; M6 (Use With H210994), Nut; (A) 6mm, Nut; M24, Nut; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) M6, Nut; M6 M8 Hex, (Sub For Mg100014), Nut; (A: W/Cab) M6, Nut; (C: 2 Used On 2 Spool Loader Valve; 4 Used On 3 Spool Loader Valve) M6, Nut; (B) 6mm, Nut; (A: For Sweden Only) M6, Nut; M6 (Sub For M500505), Nut; (A: With 2-Post Roll Gard) M6, Nut; (A: 9020t (90***00 - 90***00)(90***03 -)), Nut; (C: 2 Used On 2-Spool Valve, 3 Used On 3-Spool Valve) M6, Nut; M6 (Use With Re69391), Nut; (Sub For Ch12389), Nut; (A: 2-Post Roll Gard Low Profile) M6, Nut; (A: (-Xxxxxx) 8560-00***90; 8760-00***99; 8960-00***96) M6, Nut; For X495,X595, Nut; M6 Not Illustrated, Nut; (A: For Cab Tractors (Xxxxxx-)) M6, Nut; (A: 2 Used With 2 Spool Control Valve; 3 Used With 3 Spool Control Valve) M6, Nut; (A: If Equipped) M6, Nut; (B: (Xxxxxx-) 8560-00***04; 8760-00***52; 8960-00***15) M6, Nut; (C: 2 Used On 2 Function Loader Valve, 4 Used On 3 Function Loader Valve) M6, Nut; M6 (10.9), Nut; M6 (A), Nut; M6, (Sub 14m7273, This Application), Nut; X M6, Nut; M6, (Sub 14m7273) This Application Only; 4-Row Wide, Nut, Nut; M5, (Sub For Ch17809), Nut; M6, (Hs, Head Marked 10.9), Nut; (C: 2 Used On 2-Spool Valve, 4 Used On 3-Spool Valve.) M6, Nut; (A: 24r20) (B: 31/32r15) (C) M6, Nut; M6 (Sub For M500605), Nut; M6 (Sub For Er022111 Appl), Nut; (Sub For Ffsb107927), Nut; (C), Nut; (B: With 4-Post Roll Gard) M6, Nut; (B: European Version) M6, Nut; (A) (B) M6, Nut; M6, (Use With At103789), Nut; M6, (Australia And New Zealand Units Use 4 Per), Nut; (A: Open Operator'S Station) M6, Nut; M6, (Sub For Ffsb107927), Nut; (A: With Air Trailer Brake System) M6, Nut; (A: 8020w (1000 - 10000)(14680 -)) M6, Nut; (A: With Rear Fenders (Shell Type)) M6, Nut; M6, (Sub For Ffsb107184), Nut; (B: With Rops) M6 (Sub For Er022110, Appl), Nut; M6 (Sub For R11278, This Application), Nut; (B: Also For With Creeper Transmission, Syncroplus) M6, Nut; (E), Nut; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) M6, Nut; M6, (Sub For Ch17809), Nut; (A: (Pst) (-Xxxxxx) 7600-00***71; 7700-00***39; 7800-01***05) (B: (Powrquad) (-Xxxxxx) 7600-00***73; 7700-00***39; 7800-01***99) M6, Nut; M6 Syncroplus, Nut; 6mm, Nut; M6 Rh, Nut; (Sub For M500605), Nut; (C: 2 Used On 2 Spool Valve; 4 Used With 3 Spool Valve) M6, Nut; M6 M6 X 1, Nut; (A), Nut; M6 (Use With Re50374), Nut; (C) M6, Nut; M6 Sub For 12m7006, Nut; (D) M6, Nut; M6 Lh, Nut; (B) M6, (Use With R93022 Or R91227) (Not Used With W40616), Nut, Nut; M6 Sub For J231106, Nut; M6 (F), Nut; M6 (Sub For Pe993509), Nut; M6 (E), Nut; M6 Sub For M500605, Nut; M6 M6, Nut; 6mm (Sub For 14m7058), Nut; (A: Park Lock) (B: W/ Cab) (D: W/ Lh Reverser) M6, Nut; M8, Nut; M6 (Sub For Mg100014), Nut; (A: Park Lock) (B: W/Cab) (D: W/ L.H. Reverser) M6, Nut; M6, (Use With H210994), Nut; M6 (650 Buck Auto Ex), Nut; (Sub For C211100022), Nut; 6x1mm (Sub For 14m3242), Nut; M6, M6, Nut; M6, (Sub For Ffsb108284 And 14m7297), Nut; M6 (J), Nut; 6 mm, Nut; M6 Powrreverser, Nut; M6 (Pst), Nut; M6 (2nd Scv), Nut; M6 (3rd Scv), Nut; M6 (Sub For Er022110 Appl), Nut; (A: 7220 (01***51-)) M6, Nut; (A: (Pst) (-Xxxxxx) 7600-00***83; 7700-00***64; 7800-01***79) (B: (Powrquad) (-Xxxxxx) 7600-00***58; 7700-00***35; 7800-01***86) M6, Nut; M6, (Also Order 12m7006), Nut; (A: With Command Arm) M6, Nut; (A: Park Lock) (C: W/ L.H. Reverser) M6, Nut; M6 (Use With Re197943), Nut; M6 Up, Nut; (A) 6mm |, Nut; M6 (Use With Re507685), Nut; M6 (H), Nut; (B: With 4-Post Roll Gard) M6 M6, Nut; M6 (Use With R503345 Or Se500364), Nut; M6 (European), Nut; (A) M6, (Sub For M500605), Nut; M6, (Sub For M500605), Nut; (A: With 12v, 110ah Battery) M6, Nut; M6, (3015df106), Nut; (B) M6, Nut; M6, Nut; (C: 2 Used For 2 Spool Loader Valve; 3 Used For 3 Spool Loader Valve) M6, Nut; M6 (Sub For L111877), Nut; M6 (3/8"), Nut; M6, (Also Order 12m7006) (Sub For Ch11984), Nut; M6 (A) (European), Nut; M6, (Sub 14m7273) This Application Only, Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) M6, Nut; (A) M6, Nut; M6 Powrquad | 4 |
| 19***47 | Screw; M6x55, Screw; M6 X 55, Screw; 6x55mm, Screw | 4 |
| AH***64 | Elbow Fitting; Jam, Elbow Fitting; Used For Direct Connection To Valve, Elbow Fitting; (With Hydraulic Wagon), Elbow Fitting; (B: 8000 & 9000 Series Tractors), Elbow Fitting; (G: All Tractors), Elbow Fitting; 90 Degree Swivel, Elbow Fitting; No. 1 Cylinder Piston End To Port P1, Elbow Fitting; 90 Deg. (Sub For Mg248974), Elbow Fitting; 90° 3/4" Female Jic X 3/4" Male Jic, Elbow Fitting; (90 Degree), Elbow Fitting; 8-Row Wide, Elbow Fitting; 10- And 12- Row, Elbow Fitting; 90° Swivel, Elbow Fitting; 90° (Without Extendible Dipperstick), Elbow Fitting; (A) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting, Elbow Fitting; (Sub For Au43691), Elbow Fitting; 28', Elbow Fitting; 10 And 12- Row, Elbow Fitting; 90 Deg. (Sub For Mg248974) Adjustable, Elbow Fitting; 3/4" Jic Male X 3/4" Jic Swivel, Elbow Fitting; (90°) (213), Elbow Fitting; 90° (2 Used, Double Acting Cylinders) (Illustrated), Elbow Fitting; 90° 3/4" Mora To 3/4" Jicm, Elbow Fitting; 90°, Elbow Fitting; (2 Used, (A)) (Sub For Au43691), Elbow Fitting; (A) 90° 3/4" Jics To 3/4" Jicm, Elbow Fitting; (A), Elbow Fitting; Double Acting Valve Sections, Elbow Fitting; (Used For Direct Connection To Valve), Elbow Fitting; 90° 3/4" Jic Male X 3/4" Jic Female Swivel, Elbow Fitting; 90° (2 Used Roll-Gard Or Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (2 Used Roll-Gard And Sound-Gard Body) (Sub For Au43691), Elbow Fitting; (Sub For Aa15480), Elbow Fitting; (Sub For At124775), Elbow Fitting; 3/4" Male Jic X 3/4" Female Jic Swivel, Elbow Fitting; 90 Degree, Elbow Fitting; (G), Elbow Fitting; (A) 90°, (Sub For Au43691), Elbow Fitting; (213), Elbow Fitting; 90°, (Without Extendible Dipperstick), Elbow Fitting; (A: 50 & 55 Series Tractors With Spool Type Remote Cylinder Control Valve) 90° 3/4" Jic Swivel X 3/4" Jic Male, Elbow Fitting; (3/4" Male Jic X 3/4" Female Jic Swivel), Elbow Fitting; 90°, With Forage Wagon, Elbow Fitting; 36' And 44', Elbow Fitting; 90 °, Elbow Fitting; (Auger Swing Latch), Elbow Fitting; (For Tractors With Vertical Exhaust), Elbow Fitting; (C: Motor Return), Elbow Fitting; (A) (B) (C) (Used For Direct Connect To Valve), Elbow Fitting; 90 Degree, (Sub For Mg248974), Elbow Fitting; (B), Elbow Fitting; 90°, Swivel | 2 |
John Deere : 640a - Front Loader : 70 Hydraulics : Lift Cylinder [A13]
| AH***52 | Hydraulic Cylinder B | 1 |
| AH***53 | Hydraulic Cylinder R | 1 |
| AH***83 | Hydraulic Cylinder; (Ord Dc42316) (Sub For Ah142204) | 2 |
John Deere : 640a - Front Loader : 70 Hydraulics : Lift Cylinder [A14]
| 58***79 | Lubrication Fitting; 8 mm, Lubrication Fitting, Lubrication Fitting; M8, Lubrication Fitting; M8 X 1, Lubrication Fitting; M8x1 (Sub For 58m5574), Lubrication Fitting; 8mm, Lubrication Fitting; M8x1, Lubrication Fitting; (B: Btb), Lubrication Fitting; 90° | 2 |
| CC***22 | Bushing | 2 |
| CC***20 | Piston | 1 |
John Deere : 640a - Front Loader : 70 Hydraulics : Loader Control Valve - 2 Spool [A23]
| 3***0 | O-Ring; (Kit Ar78501), O-Ring, O-Ring; 3/32" X 7/8", O-Ring; (Sub For U11343, This Application), O-Ring; (B), O-Ring; (A), O-Ring; (A) (B), O-Ring; (A) (Sub For U11343 Appl), O-Ring; (Sub For U11343 Appl), O-Ring; (Sub For U11343), O-Ring; (A) (C), O-Ring; Ar, O-Ring; (Sub N130510, This Application), O-Ring; (B) 3/32" X 7/8", O-Ring; 21.895 X 2.616 mm (0.862" X 0.103"), O-Ring; (Sub For R48917, U11343), O-Ring; (Sub For R48917 Or U11343), O-Ring; 21.895 X 2.616 mm (0.862" X 0.103"), O-Ring; (Sub For R48917, U11343 Appl), O-Ring; (A) (Sub At15859) | 2 |
| 3***3 | Plug; Filter, Plug, Plug; (E) (F) | 2 |
| 3***6 | O-Ring; (A: (Sn -Lv0955d106611)), O-Ring; Not Used This Application, O-Ring; (K: Kit At101785 No Longer Available Order Component Parts), O-Ring; (A) (Sub For R459r), O-Ring; (A) (2 Used In Ae27341, 1 Used In Ae42233), O-Ring; (Kit An212139), O-Ring; (K), O-Ring; (A) (Pressure Compensated), O-Ring; (Sub For T12048), O-Ring; (A) (Sub R152879), O-Ring; (D) (Sub For T12048), O-Ring; (Sub For W35920), O-Ring; (A), O-Ring, O-Ring; (Sub R152879), O-Ring; (Kit An152240), O-Ring; Backup, O-Ring; (A) (Sub For R375r, This Application), O-Ring; (Use 2 For Double Bank Pump), O-Ring; (Single Bank Pump), O-Ring; (Kit An153037), O-Ring; (Use With An153036), O-Ring; (Double Bank Pump) | 4 |
John Deere : 640a - Front Loader : 70 Hydraulics : Loader Control Valve Three Function [A21]
| 3***0 | O-Ring; (Kit Ar78501), O-Ring, O-Ring; 3/32" X 7/8", O-Ring; (Sub For U11343, This Application), O-Ring; (B), O-Ring; (A), O-Ring; (A) (B), O-Ring; (A) (Sub For U11343 Appl), O-Ring; (Sub For U11343 Appl), O-Ring; (Sub For U11343), O-Ring; (A) (C), O-Ring; Ar, O-Ring; (Sub N130510, This Application), O-Ring; (B) 3/32" X 7/8", O-Ring; 21.895 X 2.616 mm (0.862" X 0.103"), O-Ring; (Sub For R48917, U11343), O-Ring; (Sub For R48917 Or U11343), O-Ring; 21.895 X 2.616 mm (0.862" X 0.103"), O-Ring; (Sub For R48917, U11343 Appl), O-Ring; (A) (Sub At15859) | 2 |
| 3***3 | Plug; Filter, Plug, Plug; (E) (F) | 3 |
| 3***6 | O-Ring; (A: (Sn -Lv0955d106611)), O-Ring; Not Used This Application, O-Ring; (K: Kit At101785 No Longer Available Order Component Parts), O-Ring; (A) (Sub For R459r), O-Ring; (A) (2 Used In Ae27341, 1 Used In Ae42233), O-Ring; (Kit An212139), O-Ring; (K), O-Ring; (A) (Pressure Compensated), O-Ring; (Sub For T12048), O-Ring; (A) (Sub R152879), O-Ring; (D) (Sub For T12048), O-Ring; (Sub For W35920), O-Ring; (A), O-Ring, O-Ring; (Sub R152879), O-Ring; (Kit An152240), O-Ring; Backup, O-Ring; (A) (Sub For R375r, This Application), O-Ring; (Use 2 For Double Bank Pump), O-Ring; (Single Bank Pump), O-Ring; (Kit An153037), O-Ring; (Use With An153036), O-Ring; (Double Bank Pump) | 5 |
John Deere : 640a - Front Loader : 70 Hydraulics : Loader Valve Mounting Parts [B01]
| 03***85 | Bolt; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) M8 X 25, Bolt; M8 X 25 M8 X 25, Bolt; M8 X 25, (12 Used-454a; 16 Used-653a, 654a, And 853a), Bolt; (A: W/ Stalkmaster) M8 X 25 30 Inch, 70cm, 75cm, Bolt; M8 X 25 (2 For 12r), Bolt; M8 X 25 (For Dc40408), Bolt, Bolt; M8 X 25, (2) R.H. Side (1) L.H. Side, Bolt; M8 X 25 (Use With Rw26983), Bolt; (Sub For 03m7184), Bolt; (A: For Open Operator'S Station Model) M8 X 25, Bolt; (C) M8 X 25, Bolt; (A: With Rotor-Type Pickup (540 Rpm Drive)) M8 X 25, Bolt; (A) M8 X 25, Bolt; M8 X 25, Bolt; M8 X 25 (918 Flex Euro), Bolt; (A: 9550 (-69***00) 9550sh (-69***00)) M8 X 25, Bolt; (A: For 25 Knives Only) M8 X 25, Bolt; M8 X 25 (Front Mount, Suspension), Bolt; M8 X 25 Rd. Hd., Bolt, Bolt; Lh, M8 X 25, Bolt; (A: For 14 Knives Only) M8 X 25, Bolt; M8 X 25, L.H. Side Only, Bolt; M8 X 25, Bolt; (B) M8 X 25, Bolt; M8 X 25 (915 - 10 Used; 918 - 12 Used; 920 And 922 - 14 Used; 925 - 16 Used; 930 - 20 Used), Bolt; M8 X 25 (B), Bolt; (A: W/ Stalkmaster) M8 X 25 20 Inch, 22 Inch, Bolt; M8 X 25, (4 Used With Sound Gard Body, 6 Used Without Sound Gard Body), Bolt; M8 X 25 (A), (B), Bolt; (A: 24r20) (B: 31/32r15) M8 X 25, Bolt; (B: For Deluxe Open Operator'S Station) M8 X 25, Bolt; M8x25, Bolt; (A: W/ Stalkmaster) M8 X 25, Bolt; (B: With Rotor-Type Pickup (1000 Rpm Drive)) M8 X 25, Bolt; M8 X 25 For Max-Merge Row Unit, Bolt; M8 X 25, (2)R.H. Side (1)L.H. Side, Bolt; M8 X 25 For Max-Emerge Row Unit, Bolt; M8 X 25, M8 X 25, Bolt; M8 X 25 Sub For 03m7184, Bolt; M8 X 25 R H | 4 |
| 11***06 | Cotter Pin; 1,600 X 14 mm, Cotter Pin; 1,5x15mm, Cotter Pin; 1,5 X 15 mm, Cotter Pin; 1.600 X 14 mm, Cotter Pin; (E), Cotter Pin, Cotter Pin; (C), Cotter Pin; (C) 1,6 X 14 mm, Cotter Pin; 1,6 X 14 mm | 0 |
| 14***72 | Nut; M6, Nut; M6 (Use With H210994), Nut; (A) 6mm, Nut; M24, Nut; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) M6, Nut; M6 M8 Hex, (Sub For Mg100014), Nut; (A: W/Cab) M6, Nut; (C: 2 Used On 2 Spool Loader Valve; 4 Used On 3 Spool Loader Valve) M6, Nut; (B) 6mm, Nut; (A: For Sweden Only) M6, Nut; M6 (Sub For M500505), Nut; (A: With 2-Post Roll Gard) M6, Nut; (A: 9020t (90***00 - 90***00)(90***03 -)), Nut; (C: 2 Used On 2-Spool Valve, 3 Used On 3-Spool Valve) M6, Nut; M6 (Use With Re69391), Nut; (Sub For Ch12389), Nut; (A: 2-Post Roll Gard Low Profile) M6, Nut; (A: (-Xxxxxx) 8560-00***90; 8760-00***99; 8960-00***96) M6, Nut; For X495,X595, Nut; M6 Not Illustrated, Nut; (A: For Cab Tractors (Xxxxxx-)) M6, Nut; (A: 2 Used With 2 Spool Control Valve; 3 Used With 3 Spool Control Valve) M6, Nut; (A: If Equipped) M6, Nut; (B: (Xxxxxx-) 8560-00***04; 8760-00***52; 8960-00***15) M6, Nut; (C: 2 Used On 2 Function Loader Valve, 4 Used On 3 Function Loader Valve) M6, Nut; M6 (10.9), Nut; M6 (A), Nut; M6, (Sub 14m7273, This Application), Nut; X M6, Nut; M6, (Sub 14m7273) This Application Only; 4-Row Wide, Nut, Nut; M5, (Sub For Ch17809), Nut; M6, (Hs, Head Marked 10.9), Nut; (C: 2 Used On 2-Spool Valve, 4 Used On 3-Spool Valve.) M6, Nut; (A: 24r20) (B: 31/32r15) (C) M6, Nut; M6 (Sub For M500605), Nut; M6 (Sub For Er022111 Appl), Nut; (Sub For Ffsb107927), Nut; (C), Nut; (B: With 4-Post Roll Gard) M6, Nut; (B: European Version) M6, Nut; (A) (B) M6, Nut; M6, (Use With At103789), Nut; M6, (Australia And New Zealand Units Use 4 Per), Nut; (A: Open Operator'S Station) M6, Nut; M6, (Sub For Ffsb107927), Nut; (A: With Air Trailer Brake System) M6, Nut; (A: 8020w (1000 - 10000)(14680 -)) M6, Nut; (A: With Rear Fenders (Shell Type)) M6, Nut; M6, (Sub For Ffsb107184), Nut; (B: With Rops) M6 (Sub For Er022110, Appl), Nut; M6 (Sub For R11278, This Application), Nut; (B: Also For With Creeper Transmission, Syncroplus) M6, Nut; (E), Nut; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) M6, Nut; M6, (Sub For Ch17809), Nut; (A: (Pst) (-Xxxxxx) 7600-00***71; 7700-00***39; 7800-01***05) (B: (Powrquad) (-Xxxxxx) 7600-00***73; 7700-00***39; 7800-01***99) M6, Nut; M6 Syncroplus, Nut; 6mm, Nut; M6 Rh, Nut; (Sub For M500605), Nut; (C: 2 Used On 2 Spool Valve; 4 Used With 3 Spool Valve) M6, Nut; M6 M6 X 1, Nut; (A), Nut; M6 (Use With Re50374), Nut; (C) M6, Nut; M6 Sub For 12m7006, Nut; (D) M6, Nut; M6 Lh, Nut; (B) M6, (Use With R93022 Or R91227) (Not Used With W40616), Nut, Nut; M6 Sub For J231106, Nut; M6 (F), Nut; M6 (Sub For Pe993509), Nut; M6 (E), Nut; M6 Sub For M500605, Nut; M6 M6, Nut; 6mm (Sub For 14m7058), Nut; (A: Park Lock) (B: W/ Cab) (D: W/ Lh Reverser) M6, Nut; M8, Nut; M6 (Sub For Mg100014), Nut; (A: Park Lock) (B: W/Cab) (D: W/ L.H. Reverser) M6, Nut; M6, (Use With H210994), Nut; M6 (650 Buck Auto Ex), Nut; (Sub For C211100022), Nut; 6x1mm (Sub For 14m3242), Nut; M6, M6, Nut; M6, (Sub For Ffsb108284 And 14m7297), Nut; M6 (J), Nut; 6 mm, Nut; M6 Powrreverser, Nut; M6 (Pst), Nut; M6 (2nd Scv), Nut; M6 (3rd Scv), Nut; M6 (Sub For Er022110 Appl), Nut; (A: 7220 (01***51-)) M6, Nut; (A: (Pst) (-Xxxxxx) 7600-00***83; 7700-00***64; 7800-01***79) (B: (Powrquad) (-Xxxxxx) 7600-00***58; 7700-00***35; 7800-01***86) M6, Nut; M6, (Also Order 12m7006), Nut; (A: With Command Arm) M6, Nut; (A: Park Lock) (C: W/ L.H. Reverser) M6, Nut; M6 (Use With Re197943), Nut; M6 Up, Nut; (A) 6mm |, Nut; M6 (Use With Re507685), Nut; M6 (H), Nut; (B: With 4-Post Roll Gard) M6 M6, Nut; M6 (Use With R503345 Or Se500364), Nut; M6 (European), Nut; (A) M6, (Sub For M500605), Nut; M6, (Sub For M500605), Nut; (A: With 12v, 110ah Battery) M6, Nut; M6, (3015df106), Nut; (B) M6, Nut; M6, Nut; (C: 2 Used For 2 Spool Loader Valve; 3 Used For 3 Spool Loader Valve) M6, Nut; M6 (Sub For L111877), Nut; M6 (3/8"), Nut; M6, (Also Order 12m7006) (Sub For Ch11984), Nut; M6 (A) (European), Nut; M6, (Sub 14m7273) This Application Only, Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) M6, Nut; (A) M6, Nut; M6 Powrquad | 0 |
John Deere : 640a - Front Loader : 70 Hydraulics : M E M O R A N D A [A15]
John Deere : 640a - Front Loader : 70 Hydraulics : M E M O R A N D A [B06]
John Deere : 640a - Front Loader : 70 Hydraulics : Mid Mount Coupler And Boom Hydraulic Hoses [B09]
| 14***04 | Nut; 3/4" 19.050 mm 3/4 Unf-2b Zn, Nut; 19.050 mm (3/4") (Sub For Na3557), Nut, Nut; 3/4" (Sub 14h902, This Application And 11h237), Nut; 3/4" (Without Hydraulic Wing Control), Nut; 3/4", (Sub For Na3557), Nut; 3/4", For 12n, Nut; 3/4", For Independent Marker, Nut; 3/4", Unf, Jam, Nut; 3/4", Jam, Nut; 3/4", Automatic Marker, Nut; 3/4", Independent Marker, Nut; 3/4", Nut; 3/4" (B), Nut; 3/4", For Automatic Marker, Nut; (A) 3/4", Nut; (A: Without Hydraulic Wing Control) 3/4", Nut; 3/4", Unf, Nut; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 3/4", Nut; 3/4" 3/4 Unf-2b Zn, Nut; 3/4" 3/4", Nut; 3/4", Unf,Jam, Nut; (B: Note; (Tbh Illustrated) (Tbt) -71***05 (Tbh) -71***78) 3/4", Nut; 3/4", For 6w, 8n, 8w, Nut; 3/4", Jam. Unf., Nut; 3/4" Jam, Nut; (B) 3/4", Nut; Without Hydraulic Wing Control, Nut; (A: Note; (Tbt) 71***06- (Tbh) 71***79-) 3/4", Nut; (B) 3/4", Nut; 304", Nut; 3/4" Without Hydraulic Wing Control | 4 |
| 14***99 | Nut; M12 (Sub For A31867 This Application), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; (A: For 9650 (70***01-) & 9750 (70***01-)) M12, Flange Nut; (Use With 135 Amp), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: For 9650 (-69***95) & 9750 (-69***24)) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn All) M12, Nut; (A: For 9650 (69***96-) & 9750 (69***25-)) M12, Nut; M12 (Fine Cut Conversion), Nut; M12 (132"), Nut; (J: Without Liquid Fertilizer) M12, Nut; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Saran (Cd) Esn 52***16-) (B: Dubuque (To) Esn 74***90-) M12, Nut; M12 (For Dc41181), Nut; M12 (Low R.H.), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (B: Cab W/O Mechanical Front Wheel Drive) M12, Nut; (A: Only For 2, 0 M Hiflow Pickup) M12, Nut; M12 (Use With Ah207294), Nut; M12 (Lower Rh), Nut; (B) M12 (For Lgth = 1600 mm (62,9")), Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (B: Flight) M12, Nut; (A) (B: Dubuque (To) Esn 71***69- 74***89), Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: From Sr.No.5310s(00***84-), 5410(00***19-), 5610(00***01-).) M12, Nut; M12 (For Use With 4th And 5th Scv Kit, Lv150130), Nut; (B: Dubuque (T0) Esn 72***12) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -74***89) (E: Saran (Cd) Esn -52***26) M12, Nut; (B: Dubuque (T0) Esn Xxxxxx-72***11) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) M12, Nut; M12, When Mounted On Frame, Nut; (C: High Capacity) M12, Nut; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M12 M12, Nut; (A: For 9650 (70***01-) & 9750 (70***01-)) M12, Nut; M12 (For Lgth = 1600 mm (62,9")), Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M12, Nut; (B: Dubuque (T0) Esn 72***12) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -74***89) (E: Saran (Cd) Esn -52***92) M12, Nut; (A: Isolated Open Operator Station) (C: Cab With Mechanical Front Wheel Drive) M12, Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -53***64) M12, Nut; M12 (B), Nut; M12, (Use With Aw23160 Or Aw25451), Nut; M12 2112c Only, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Use With W38632) On 1750, 4, 6, And 8 Row, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; (A: Use With Two-Rank Machine, 60, 000 Lb. Safety Chain Attachment) M12, Nut; M12 (Use With Ah148279), Nut; M12 M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Flange Nut; M12, (High Ambient), Nut; (A: -Xxxxxx (9550, -69***29)(9550sh, -69***17)) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; M12 (B) (914), Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: 9550 (69***01-) 9550sh (69***01-)) M12, Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M12, Nut; M12, (Option 9701), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (A: Dubuque (T0) Esn -74***89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) M12, Nut; M12 (Use With Toolbox Mount With Front Weights Or Loader), Nut; (A: Saran (Cd) Esn Xxxxxx-) (B: Dubuque (T0) Esn 72***12-) (C: Saran (Cd) Esn -52***15) (D: Dubuque (T0) Esn -74***89) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Dubuque (To) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn Xxxxxx-) (B: Dubuque (T0) Esn -72***11) M12, Nut; (B: Cab Without Mechanical Front Wheel Drive) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***26) M12, Flange Nut; M12, (Standard), Nut; (B: Dubuque (T0) Esn Xxxxxx) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -72***11) (E: Saran (Cd) Esn -Xxxxxx) M12, Nut; (B) M12 (For Lgth = 1600 mm(62,9")), Nut; M12 (Sub (2) 19m7791, (2) E12335 And (2) R273534, This Application), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (To) Esn -74***89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (A: 9550 (69***01-) 9550sh (96***01-)) M12, Nut; (A) (B) M12, Nut; (A: Dubuque (T0) Esn 71***69-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (B: Dubuque (To) Esn -74***89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (Includes Re500778), Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; M12 (Use With Aw23160 Or Aw25451), Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn 51***31) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; (A: Use With Tow-Behind Cart) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (For Dc41481), Nut; M12 Tk=1mm, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Not Used On 1780), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: 9550 (70***01-) 9550sh (70***01-)) M12, Nut; (B) M12 (For Lgth = 2400 mm (94,4")), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Use With Ah166327), Nut; (A: Used With Double Twine Arm.) M12, Nut; (C) (D) (F) M12, Nut; (A: For Rotor-Type Pickup) M12, Nut; (B) (C) M12 (For Lgth = 1600 mm (62,9")), Nut; M12 (Use With Frame Or Hood Guard Mounted Toolbox), Nut; M12, Nut; (A: W/ Power Take-Off) M12, Nut; (A: For 9650 (-70***00) & 9750 (-70***00)) M12, Nut; (A), Nut; (B: For Msl) M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn Xxxxxx-72***11) M12, Nut; M12, For Transmission, Nut; (A: For 1, 81 Meter Pickup) M12, Nut; (A: Used With Tow-Between Cart) M12, Nut; M12 Rh, Nut; M12, R.H., Nut; (C) (D) M12, Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M12, Nut; M12 (Lower Rh), Nut; M12 (Use With H208429), Nut; (E) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; M12 (For Dc35502, Dc41100, Dc54697), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: Dubuque (To) Esn 72***12-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M12, Nut; M12, For Transmission (30" And 36" Row Spacing), Nut; (B: Dubuque (T0) Esn -74***89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (A: With Sound Gard Body) M12, Nut; (B: Used With Tow-Behind Cart) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: (6068hn053)) M12, Nut; (B: For Msl) (C: For Nsl) M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: (6068hn056)) M12, Nut; (A: For 25 Knives Only) M12, Nut; (A: Saran (Cd) Esn 52***16-) (B: Dubuque (T0) Esn 74***90-) M12, Nut; (C: Sound-Gard Body) M12, Nut; M12 (Use With W38632)On 1750, 4, 6, And 8 Row, Nut; (A: Dubuque (To) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (To) Esn Xxxxxx-) (B: Dubuque (To) Esn -72***11) M12, Nut; M12 (For Dc47713), Nut; (A: Extra Heavy Duty) M12, Nut; (B) (C) M12 (For Lgth = 1600 mm(62,9")), Nut, Nut; M12, (Use With H161599), Nut; M12 M16 X 210, Nut; (A: For 5e Series Tractors) M12 Lh, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Saran (Cd) Esn -52***92) (B: Dubuque (T0) Esn -74***89) M12, Nut; (A: Dubuque (To) Esn 71***69-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (C: Regular) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (To) Esn Xxxxxx-72***11) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) M12, Nut; M12 (110" And 132"), Nut; (A: Cab W/Mechanical Front Wheel Drive) (C: Isolated Open Operator Station) M12, Nut; M12 L.H., Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Wide Fender) M12, Nut; M12 (Use With Ah162724 Or Ah145282), Nut; M12 (Use With H202011 Or H202009), Nut; (I: When Mounted On Marker Mast) M12, Nut; (A) (B) (C) (D) M12, Nut; (B) M12 (For Lgth = 2000 mm (78,7")), Nut; (B) M12, Nut; (B: For Msl) M12 (For 2000 mm), Nut; M12 (Center), Nut; M12 (Use With Ah162724 Or Ah207294), Nut; (C) M12, Nut; (A: For Ballast Attachment) M12 For Ballast Attachment, Nut; M12 (E), Nut; M12 Lh, Rh, Nut; (A) M12, Nut; (A: Dubuque (To) Esn 72***12-) (B: Saran (Cd) Esn 51***31-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; M12 (Used On Frames W/O Weld Nuts), Nut; M12 When Mounted On Frame, Nut; M12 (Use With H161599), Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (A: For 14 Knives Only) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Hi Capacity) M12, Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: With Cab) M12, Flange Nut; (K) M12, Nut; (A: Starting From Series Number 625 (06***44-), 630 (06***34-)) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) (B: Dubuque (T0) Esn -72***11) M12, Nut; M12, (Sub For Et11505), Nut; M12, Flange, Nut; M12 (45, 60), Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; (A: Only For 2.0 M Hiflow Pickup) M12, Nut; (A: For 1, 81 M Pickup And 2, 20 M Hiflow Pickup) (B: For Precutter) (C: For 2, 00 Meter Pickup Hiflow) M12, Nut; (B: With Precutter) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (B) (C) (D), Nut; M12 Marker Mast Mounted, Nut; M12 (A) (B), Nut; (D) M12, Nut; M12, (Use With Ah162724 Or Ah145282), Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: For Msl) M12 (For 2400 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; M12 4" (630), Nut; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12, Nut; (A: Dubuque (T0) Esn -74***89) (B: Saran (Cd) Esn -52***92) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; M12 (Includes Re500778), Nut; (A: Conversion Kit, Rotary To Auger) M12, Nut; M12 When Mounted On Marker Mast, Nut; M12, When Mounted On Marker Mast, Nut; (A: Dubuque (T0) Esn -70***94) (B: Saran (Cd) Esn -Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (F: (Xxxxxx-) 8100-02***31; 8200-02***32; 8300-02***59; 8400-02***33) M12, Nut; (C: Up To Series 622 (-08***61), 625 (-08***97), 630 (-08***54)) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -55***82) M12, Flange Nut; M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (To) Esn -74***89) (B: Saran (Cd) Esn -52***92) M12, Nut; (A: Saran (Cd) Esn Xxxxxx-) (B: Dubuque (To) Esn 72***12-) (C: Saran (Cd) Esn -52***15) (D: Dubuque (To) Esn -74***89) M12, Nut; M12 (Sub For A31867), Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -53***64) M12, Nut; M12 Frame Mounted, Nut; M12, (Sub (2) 19m7791, (2) E12335 And (2) R273534, This Application), Nut; (A: For 2, 20 Meter Pickup) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn 51***31-52***92) M12 (Option 9701), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Up To Series 625 (-06***43), 630 (-06***33)) M12, Nut; (C: Lower Right Hand) M12, Nut; (E: (-Xxxxxx) 8100-02***30; 8200-02***31; 8300-02***58; 8400-02***32) M12, Nut; M12, (Use With Ah207294), Nut; (A: Included In Ae48634) M12, Nut; (A: Isolated Open Operator Station) (C: Cab W/Mechanical Front Wheel Drive) M12, Nut; (A: Only For 1.8 M Pickup) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn 72***12-) (B: Saran (Cd) Esn 51***31-) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12, Nut; M12 (A), Nut; (A: For Prodrive) M12, Nut; (A: Use Only For Kernel Processor Quick Conversion) M12, Flange Nut, Nut; M12, (Use With Ah145282 Or Ah162724), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) M12, Nut; M12, M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) (C: Torreon (Pe) Esn Xxxxxx-53***64) M12, Nut; (A: Cab With Mechanical Front Wheel Drive) (C: Isolated Open Operator Station) M12, Nut; M12 (Not Used With Field Installed Loader Backhoe), Nut; (A: W/O Second Curtain) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; M12, Rh, Nut; (H: When Mounted On Frame) M12, Nut; (C: Up To Series 2111 (-13425), 2113 (-13421), 2115 (-13405)) (D: Up To Series 2117 (-13415), 2122 (-13423), 2126 (-06***05)) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: (618/620) Rigid) M12, Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; M12 (Use With Ah162724), Nut; M12 Lh, Nut; M12 Tow-Behind, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12 | 2 |
| 19***88 | Bolt; (A: Windrower Option Only) M12 X 25, Bolt; (A: Upto Sr.No.5203-00***76.) M12 X 25, Bolt; M12 X 25 (B), Bolt; (A) M12x25, Bolt; (B) M12x25, Bolt; (C) M12 X 25, Bolt; (E) M12 X 25, Bolt; M12 X 25 (Sub For 19m7789), Bolt; (A: With Net Coveredge) M12 X 25, Bolt; Ar, M12 X 25, Bolt; M12 X 25 Hs 10.9, Bolt; M12 X 25, Into Weld Nuts, Bolt; M12 X 25, (Use With Am107212), Bolt; M12 X 25 Hs=10.9, Bolt; M12 X 25 (Hs=10.9), Bolt; M12 X 25, Bolt; (A: Without Net Coveredge) M12 X 25, Bolt; (A: W/Cab) (B: W/O Cab) M12 X 25, Bolt; (A: 5103e( -00***16), 5103/5103s( -00***16), 5203( -00***76).) (C: 5038d(00***01- ).) M12 X 25, Bolt; M12 X 25, Into R.H. Side Of Gear Case, Bolt; M12 X 25, Torque To 105 Lb-Ft (140 Nm), Bolt; M12 X 25 (Hs, Head Marked 10.9) (Sub For M802788), Bolt; (A) M12 X 25, Bolt; M12 X 25 (Use With R208963), Screw; M12 X 25, Flanged, Bolt; M12 X 25 (Use With Kv15487)(Hs, Head Marked 10.9), Bolt; M12 X 25 (Use With Kv20215), Bolt; M12 X 25 (Marked R500305), Bolt; (A: High Unloading Rate) M12 X 25, Bolt; M12 X 25 (Hs, Head Marked 10.9) (Use With Kv20899), Bolt; (A: 24"X8"X14"-20pr Severe Duty Ag Tire) M12 X 25, Bolt; M12 X 25 (M12x20) From Unit. 19m7787 Provided In Bundle Are For Shipping Only., Bolt; (B: Without Net Wrapping) M12 X 25, Bolt; (A: Without Net Coveredge) (B: Only For 2, 0 M Rotoflow Or Maxicut Pickup) M12 X 25, Screw; M12 X 25 (Hs, Head Marked 10.9), Bolt; M12 X 25, (Utilizar Con R501144), Bolt; (A: Without Net Coveredge) (B: Only For 2.0 M Rotoflow Or Maxicut Pickup) M12 X 25, Bolt; M12 X 25 Cab Support To Fuel Tank Outer, Bolt; (A: With Cab) M12 X 25, Bolt; M12x25, Bolt; M12 X 25, Grade 10.9, Bolt; M12 X 25, (Cd4045), Bolt; (A: With Cab) M12 X 25 (Hs=10.9), Bolt; M12 X 25, (10.9), Bolt; (A: 42" X 7.5") (B: 40" X 7.5") M12 X 25, Screw, Bolt; M12 X 25 M12 X 25, Bolt; (B: For Usa Only) M12 X 25, Bolt; M12 X 25 3/4" X 6", Bolt; M12 X 25 Hs, 10.9, M12 X 25, Screw; (Sub For T101955), Bolt; M12 X 25 (Hs, Head Marked 10.9) (Use With Kv15487), Bolt; M12 X 25 (-), Bolt; M12 X 25 (Sub For H131628), Bolt; M12 X 25, (Sub For M802788), Bolt; M12 X 25 (M12x20) Provided In Bundle Are For Shipping Only, From Unit. 19m7787 ., Bolt; (A: With Net Wrapping) M12 X 25, Screw; Engine To Transmission, Bolt; M12 X 25 (M12x20) From Unit.19m7787 Provided In Bundle Are For Shipping Only., Bolt; (B: For 2, 20 Meter Pickup (Hiflow)) M12 X 25, Bolt; (A: 5103s( -00***16), 5203( -00***76).) (C: 5038d(00***01- ).) M12 X 25, Bolt; M12 X 25 (10.9), Bolt; (A: 9550 (69***01- ) 9550sh (69***01- )) M12 X 25, Bolt; (A: 9550 ( -69***00) 9550sh ( -69***00)) M12 X 25, Bolt; (A: 9550 ( -69***00) 9550sh ( -69***00)) M12 X 25, Bolt; M12 X 25 (Hs 10.9), Bolt; (E: 26"X9"X14.5"-24pr Severe Duty Ag Tire) (D: 24"X8"X14"-20pr Severe Duty Ag Tire) M12 X 25, Bolt, Bolt; (A: W/O Second Curtain) M12 X 25, Screw; M12 X 25, Bolt; (C: 26"X9"X14.5"-24pr Severe Duty Ag Tire) (D: 24"X8"X14"-20pr Severe Duty Ag Tire) M12 X 25, Bolt; M12 X 25 From Unit. 19m7787 (M12x20) Provided In Bundle Are For Shipping Only., Bolt; M12 X 25 (Use With Kv20899)(Hs, Head Marked 10.9), Bolt; M12 X 25 (Dp052, Dp057), Bolt; M12 X 25, Torque To 105 Lb-Ft (140 N-M), Bolt; (A: W/O Air Brake) M12 X 25, Bolt; (A: For 2, 20 Meter Pickup) M12 X 25, Bolt; (A: With Net Wrapping) M12 X 25 (Sub For 19m7188), Bolt; M12 X 25 (Hs, Head Marked 10.9), Bolt; (A) (B) M12 X 25, Bolt; M12 X 25 Dp052, Dp057, Bolt; M12 X 25 (Use With R128730), Bolt; (A: Use With Net Wrap) M12 X 25, Bolt; M12 X 25 Not Illustrated; See Dtac Solution 91901, Screw; M12 X 25, (Use With R128730) | 2 |
80 Frame, Miscellaneous
John Deere : 640a - Front Loader : 80 Frame, Miscellaneous : Boom, Mast And Bucket Holder (Nsl) [B14]
| 11***12 | Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm | 12 |
| 11***81 | Cotter Pin; (B) 2.500 X 20 mm, Cotter Pin; 2.500 X 20 mm (A) (B), Cotter Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 2.500 X 20 mm, Cotter Pin; 2.500 X 20 mm (Use With Ah201398), Cotter Pin; 2.500 X 20 mm, 3/32" X 0.75", Cotter Pin; 2.500 X 20 mm, Cotter Pin; 0.098" X 0.787", (Hc), Cotter Pin; 2.500 X 20 mm (0.098" X 0.787"), Cotter Pin, Cotter Pin; 0.098" X 0.787", (Nla), Cotter Pin; 2,5x20mm, Cotter Pin; 2.500 X 20 mm, (Sub For 11h206), Cotter Pin; (A: ( -Xxxxxx) 7600-00***85; 7700-00***79; 7800-00***49) 2.500 X 20 mm, Cotter Pin; 0.098" X 0.787", (H), Cotter Pin; (A: 3201 Panel Gages Sp Cntrl) (B: 3202 Panel Gages Sp Cntrl) (C: 3208 Panel Gages Sp Cntrl) 2.500 X 20 mm, Cotter Pin; (K: At100208 Linkage - No Longer Available (Includes At101913, At106687, C1067r, M84972, T100992,) 2.500 X 20 mm, Cotter Pin; 0.098" X 0.787", (Sub For 11h206), Cotter Pin; 2.500 X 20 mm, Cotter Pin; (A) 2.500 X 20 mm, Cotter Pin; (G) 2.500 X 20 mm, Cotter Pin; 2.500 X 20 mm (Sub For 11h206), Cotter Pin, Cotter Pin; 0.098" X 0.787", (1 Used Gasoline) (2 Used Diesel), Cotter Pin; 0.098" X 0.787", (Dual Hydraulic), Cotter Pin; (A) (C) 0.098" X 0.787", Cotter Pin; 2.500 X 20 mm Not Illustrated, Cotter Pin; (A: 9901 With Temperature And Oil Pressure Gages) (B: 9902 For Enclosure Field) 2.500 X 20 mm, Cotter Pin; 0.098" X 0.787" | 2 |
| AW***32 | Holder; R.H., Holder; Rh | 1 |
John Deere : 640a - Front Loader : 80 Frame, Miscellaneous : Boom, Mast And Bucket Holder [B16]
| 11***12 | Cotter Pin; M3 X 18, Cotter Pin; 3.200 X 16 mm, (Mechanics Only), Cotter Pin, Cotter Pin; 3,2x16mm (W/ E55828), Cotter Pin; 3 2x16mm, Cotter Pin; (A: Used With Optional Double Twine Arm.) 3.200 X 16 mm, Cotter Pin; (A) 3,2 X 16 mm, Cotter Pin; 3,200x16mm, Cotter Pin; (A: For Msl) 3.200 X 16 mm, Cotter Pin; 3 X 18 mm, Cotter Pin; 3,2 X 16 mm (For Z24486), Cotter Pin; 3.2x16mm, Cotter Pin; 0.126" X 0.630", Cotter Pin; (C) 3,2 X 16mm, Cotter Pin; (C) 3.200 X 16 mm, Cotter Pin; 3,2x16mm (Sub For 11h211), Cotter Pin; 3.200 X 16 mm, (4 Used, 327; 2 Used, 337), Cotter Pin; 3.200 X 16 mm (For Al116716), Cotter Pin; 3,2x16 mm, Cotter Pin; 3x18mm, Cotter Pin; (A) 3,2x16mm, Cotter Pin; 3,200 X 16 mm, Cotter Pin; (A) 3.200 X 16 mm, Cotter Pin; Used With 2 Foot Console Harness, Cotter Pin; 3,2x16mm, Cotter Pin; 3,2 X 16mm, Cotter Pin; 3.200 X 16 mm, Cotter Pin; 3,2 X 16 mm, Cotter Pin; (A: Only For North America And Japan) 3.200 X 16 mm, Cotter Pin; (C) 3.200x16mm, Cotter Pin; 32x16mm, Cotter Pin; (A: Tss Transmission) 3.200 X 16 mm | 0 |
| AW***38 | Pivot; R.H., Pivot; Rh | 1 |
| AW***39 | Pivot; L.H, Pivot; Lh | 1 |
John Deere : 640a - Front Loader : 80 Frame, Miscellaneous : Decals [C01]
| CC***40 | Decals; (A: Channel, Wiring Harness (Cab)), Decals; (Sub For L64991, L64997, L64998), Decals; (B: Mexico, Central America, South America) (Sub For L64998), Decals; (E), Decals; (Prt), Decals; (D: Warning), Decals; (A: Safety) (Sub For L64997), Decals; (A: European Version), Decals; (Sub For M121846) (Appl), Decals; (Hst), Decals; (D: For 2, 00 Meter Pickup With Rotoflow) Lh, Decals; (Ev), Decals; (Sub For L64991, L64997, L64998 ), Decals; (B: Mexico, Central America, South America), Decals; (D: From Sr. No. 5103s (02***67- ), 5104 (01***02- ), 5204 (00***36- ), 5038d(00***21- )), Decals, Decals; "Read Owners Manual", Decals; (B: Read Operator Manual), Decals; (B: For Region Ii), Decals; (Russian), Decals; Read Oprator'S Manual, Decals; (C: From Sr.No. 5103s(02***67- )), Decals; "Read O.M.", Decals; (A: Hungary) (Sub For R105924), Decals; Decal (Read Operator'S Manual), Decals; (Sub For L64991, L64998), Decals; Rh, Decals; For Rockshaft, Decals; Read Operators Manual (Russian), Decals; (A: Safety) (Sub For L64991), Decals; Lh, Rh, Decals; (B: European Version) (E: Cis Version), Decals; (Russian And Ukrainian) "Read O.M.", Decals; (A: Germany, France, Netherlands) (C: Spain, Greece, Italy, Portugal) (D: Hungary), Decals; (A: European Version) (Sub For L64991), Decals; (A: Cab Tractors) (B: Cab Tractors) (C: For South African Market Only), Decals; (Sub For Er138177 Appl), Decals; Danger - Warning, Decals; (A: Spain, Greece, Italy, Portugal) (Sub For L64998), Decals; Safety Signs, Decals; (Sub For Er138177, Appl), Decals; (Srt), Decals; Safety Sign, Decals; (Oos), Decals; (Sub For L64991, L64997, L64998), Decals; (D: From Sr.No. 5104 (01***02- ), 5204 (00***36- ), 5038d (00***21- )), Decals; (B: European Version), Decals; Read Operator'S Manual, Decals; Safety, Decals; (B: Safety) (Sub For L64991), Decals; (Read Operator Manual), Decals; (B), Decals; (A), Decals; (A: Germany, France, Netherlands) (Sub For L64991), Decals; Steering Column, Decals; Lh, Decals; (A: No Longer Required), Decals; (E: For 2, 00 Meter Pick Up With Precutter) Rh, Decals; (Cst), Decals; (G: For 2, 00 Meter Pickup With Rotoflow) Rh, Decals; (A: Denmark, Norway, Sweden, Finland) (Sub For L64997), Decals; "Read Operators Manual", Decals; (A: With Precutter) Lh, Rh, Decals; (A: For 2, 00 Meter Pick Up With Precutter) Lh | 1 |
| CC***65 | Label; (For Ec47709, Ec47710), Label; (For Ec47709, Ec47710), Label | 1 |
| CC***64 | Label; Warning - Multiple Hazards (Export), Label; (Sub For W54772) (Appl), Label; (German), Label, Label; (A), Label; (E), Label; (C: Warning-Falling) | 1 |
John Deere : 640a - Front Loader : 80 Frame, Miscellaneous : Hood Guard For 6000 Series Tractors [B22]
| 14***91 | Nut; (A: For John Deere Axles) M16, Nut; (B: Xxxxxx- (9550, 69***30-)(9550sh, 69***18-)) M16, Nut; M16 North America, (Sub For E63528), Nut; (A: Heavy Duty) M16, Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M16, Nut; (B) M16, Nut; (A: For 6d T3 Tractor) M16, Nut; (A: Extra Heavy Duty) M16, Nut; (A: With Rotor-Type Pickup) M16, Nut; (A: Without The Largest Diameter Starter Roll) M16, Nut; M16 (Use With Toolbox Mount With Front Weights Or Loader), Nut; M16 M16, Nut; (A: United States And Canada) (D: Without Roll-Gard) M16 (2840, 2940, 2950, 2955, 3130, 3140, 3650), Nut; (A: Conversion Kit, Rotary To Auger) M16, Nut; (A: Only For Argos (8r Ivt And Pst)) M16, Nut; M16 Tow-Between, Nut; M16 (Sub For A31869, This Application), Nut; M16 (Also Ord 24m7241) (Use W21684 Special Washer Under Each 14m7291 Flange Nut), Nut; (B: All-Run And Primary Only Systems (Master Controller)) M16, Nut; (A: For 575 With Pick Up W/O Precutter) M16, Nut; (A: Included In Ae48634) M16, Nut; M16, Nut; (A: Starting From Series Number 625 (06***44-), 630 (06***34-)) M16, Nut; (A: For Dual Speed Straw Chopper Drive) M16, Nut; (F: United Kingdom, France, Germany And Sweden) M16, Nut; M16 (Use With H214618), Nut; (A: For Pickup 2, 20 M) (B: With Net Wrapping) M16, Nut; M16 Lh, Rh, Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M16, Nut; M16 (Sub For E63528), Nut; M16 (A) (European), Nut; M16, M16, Nut; (A), Nut; (C) (D) M16, Nut; M16 Europe, (Sub For E63528), Nut; (D: Note; (71***06-) Tow-Between (71***79-) Tow-Behind) M16, Nut; (C: Note; (-71***05) Tow-Between (-71***78) Tow-Behind) M16, Nut; (A) M16, Nut; (A) (B) M16, Nut; M16 (A), Nut; (C) M16, (2840, 2940, 2950, 2955, 3130, 3140), Nut; (A: For John Deere Axles) M16, Nut; M16, (Use With H214618), Nut; (A: For Pickup 2,20 M) (B: With Net Coveredge) M16, Nut; M16 Flange, Nut; (A: 9550 (69***01-) 9550sh (69***01-)) M16, Nut; (A: With The Largest Diameter Starter Roll) M16, Flange Nut; M16, Nut; (A: For Machines Prior To 01 June 96) M16, Nut; (I) (J) M16, Nut; M16 (Optional), Nut; M16, (Sub For E63528), Nut; M16 (A) (B), Nut; (A: High Unloading Rate) M16, Nut, Nut; (D: For Lateral Tilt) M16, Nut; M16, (Used On 2840, 2940, 2950, 2955, 3130 And 3140 Tractors Without Roll-Gard In United States And Canada), Nut; (A: Up To Series 625 (-06***43), 630 (-06***33)) M16, Nut; M10, Nut; (C: Primary Only System (Slave Controllers)) M16 | 6 |
| 19***94 | Bolt; M16 X 50 Bolt-On Cutting Edge, Bolt; M16 X 50 (For Cc48389), Bolt; M16 X 50 Europe, Bolt; M16 X 50 (Use With Ah206042), Bolt; M16 X 50, M16x50, Bolt; M16 X 50 (Hs, Head Marked 10.9, Bolt; M16 X 50 Use With Aa57422, Bolt; M16 X 50 Titn To 350 Nm, Bolt; M16 X 50 North America, Bolt; (B: 1450 And 1650 Tractors With Weight Bracket) M16 X 50 (Use With (2) Z35282), Bolt; M16 X 50 Sub For 19m7409, Bolt; M16 X 50 (Hs=10.9), Bolt; (A: For 575 With Pick Up W/O Precutter) M16 X 50, Bolt; (A: Used With Surface Wrap.) M16 X 50, Bolt; M16 X 50 Reel, Bolt; M16 X 50 For Planetary Final Drive, Bolt; M16 X 50, Bolt; M16 X 50 (F), Bolt; M16 X 50, (10.9), Bolt; (A: 1450 And 1650 Tractors Without Weight Bracket) M16 X 50, Bolt; M16 X 50 (Hs, Head Marked 10.9), Bolt; M16 X 50 (10.9), Bolt; (A: 7210-02***06, 7410-02***96) M16 X 50, Bolt; M16 X 50 (Roll Uses 2) (Impeller Uses 1), Bolt; M16x50, Bolt; M16 X 50 Hs=10.9, Bolt; M16 X 50, Use On 7020 Tractors, Bolt; M16 X 50 M16 X 50 | 2 |
| 19***28 | Bolt; M16 X 100 (Hs, Head Marked 10.9), Bolt; M16 X 100 Used On The Two Rear Hinges (Rear Two Holes Only) To Attach Warning Light Brackets, Screw; M16 X 100, Bolt; M16 X 100, Bolt, Bolt; (E) M16 X 100, Bolt; M16 X 100 (2840, 2940, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3350), Bolt; (A) M16 X 100, Bolt; M16x100, Bolt; (B) M16 X 100 | 6 |
John Deere : 640a - Front Loader : 80 Frame, Miscellaneous : Hood Guard [B23]
| 03***00 | Bolt; (A: With Free Roll No.11) M12 X 40, Bolt; M12x40, Bolt; (C: Regular) M12 X 40, Bolt; M12 X 40 L.H., Bolt; M12 X 40, Bolt; (A) (B) (C), Bolt; M12 X 40 (Used With Rear Chain Shields), Bolt; M12 X 40 Rh, Bolt; (A: For Rotor-Type Pickup) M12 X 40, Bolt; M12 X 40, (Used With Rear Chain Shields) | 4 |
| 14***91 | Nut; (A: For John Deere Axles) M16, Nut; (B: Xxxxxx- (9550, 69***30-)(9550sh, 69***18-)) M16, Nut; M16 North America, (Sub For E63528), Nut; (A: Heavy Duty) M16, Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M16, Nut; (B) M16, Nut; (A: For 6d T3 Tractor) M16, Nut; (A: Extra Heavy Duty) M16, Nut; (A: With Rotor-Type Pickup) M16, Nut; (A: Without The Largest Diameter Starter Roll) M16, Nut; M16 (Use With Toolbox Mount With Front Weights Or Loader), Nut; M16 M16, Nut; (A: United States And Canada) (D: Without Roll-Gard) M16 (2840, 2940, 2950, 2955, 3130, 3140, 3650), Nut; (A: Conversion Kit, Rotary To Auger) M16, Nut; (A: Only For Argos (8r Ivt And Pst)) M16, Nut; M16 Tow-Between, Nut; M16 (Sub For A31869, This Application), Nut; M16 (Also Ord 24m7241) (Use W21684 Special Washer Under Each 14m7291 Flange Nut), Nut; (B: All-Run And Primary Only Systems (Master Controller)) M16, Nut; (A: For 575 With Pick Up W/O Precutter) M16, Nut; (A: Included In Ae48634) M16, Nut; M16, Nut; (A: Starting From Series Number 625 (06***44-), 630 (06***34-)) M16, Nut; (A: For Dual Speed Straw Chopper Drive) M16, Nut; (F: United Kingdom, France, Germany And Sweden) M16, Nut; M16 (Use With H214618), Nut; (A: For Pickup 2, 20 M) (B: With Net Wrapping) M16, Nut; M16 Lh, Rh, Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M16, Nut; M16 (Sub For E63528), Nut; M16 (A) (European), Nut; M16, M16, Nut; (A), Nut; (C) (D) M16, Nut; M16 Europe, (Sub For E63528), Nut; (D: Note; (71***06-) Tow-Between (71***79-) Tow-Behind) M16, Nut; (C: Note; (-71***05) Tow-Between (-71***78) Tow-Behind) M16, Nut; (A) M16, Nut; (A) (B) M16, Nut; M16 (A), Nut; (C) M16, (2840, 2940, 2950, 2955, 3130, 3140), Nut; (A: For John Deere Axles) M16, Nut; M16, (Use With H214618), Nut; (A: For Pickup 2,20 M) (B: With Net Coveredge) M16, Nut; M16 Flange, Nut; (A: 9550 (69***01-) 9550sh (69***01-)) M16, Nut; (A: With The Largest Diameter Starter Roll) M16, Flange Nut; M16, Nut; (A: For Machines Prior To 01 June 96) M16, Nut; (I) (J) M16, Nut; M16 (Optional), Nut; M16, (Sub For E63528), Nut; M16 (A) (B), Nut; (A: High Unloading Rate) M16, Nut, Nut; (D: For Lateral Tilt) M16, Nut; M16, (Used On 2840, 2940, 2950, 2955, 3130 And 3140 Tractors Without Roll-Gard In United States And Canada), Nut; (A: Up To Series 625 (-06***43), 630 (-06***33)) M16, Nut; M10, Nut; (C: Primary Only System (Slave Controllers)) M16 | 2 |
| 14***99 | Nut; M12 (Sub For A31867 This Application), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; (A: For 9650 (70***01-) & 9750 (70***01-)) M12, Flange Nut; (Use With 135 Amp), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: For 9650 (-69***95) & 9750 (-69***24)) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn All) M12, Nut; (A: For 9650 (69***96-) & 9750 (69***25-)) M12, Nut; M12 (Fine Cut Conversion), Nut; M12 (132"), Nut; (J: Without Liquid Fertilizer) M12, Nut; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Saran (Cd) Esn 52***16-) (B: Dubuque (To) Esn 74***90-) M12, Nut; M12 (For Dc41181), Nut; M12 (Low R.H.), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (B: Cab W/O Mechanical Front Wheel Drive) M12, Nut; (A: Only For 2, 0 M Hiflow Pickup) M12, Nut; M12 (Use With Ah207294), Nut; M12 (Lower Rh), Nut; (B) M12 (For Lgth = 1600 mm (62,9")), Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (B: Flight) M12, Nut; (A) (B: Dubuque (To) Esn 71***69- 74***89), Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: From Sr.No.5310s(00***84-), 5410(00***19-), 5610(00***01-).) M12, Nut; M12 (For Use With 4th And 5th Scv Kit, Lv150130), Nut; (B: Dubuque (T0) Esn 72***12) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -74***89) (E: Saran (Cd) Esn -52***26) M12, Nut; (B: Dubuque (T0) Esn Xxxxxx-72***11) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) M12, Nut; M12, When Mounted On Frame, Nut; (C: High Capacity) M12, Nut; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M12 M12, Nut; (A: For 9650 (70***01-) & 9750 (70***01-)) M12, Nut; M12 (For Lgth = 1600 mm (62,9")), Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M12, Nut; (B: Dubuque (T0) Esn 72***12) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -74***89) (E: Saran (Cd) Esn -52***92) M12, Nut; (A: Isolated Open Operator Station) (C: Cab With Mechanical Front Wheel Drive) M12, Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -53***64) M12, Nut; M12 (B), Nut; M12, (Use With Aw23160 Or Aw25451), Nut; M12 2112c Only, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Use With W38632) On 1750, 4, 6, And 8 Row, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; (A: Use With Two-Rank Machine, 60, 000 Lb. Safety Chain Attachment) M12, Nut; M12 (Use With Ah148279), Nut; M12 M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Flange Nut; M12, (High Ambient), Nut; (A: -Xxxxxx (9550, -69***29)(9550sh, -69***17)) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; M12 (B) (914), Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: 9550 (69***01-) 9550sh (69***01-)) M12, Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M12, Nut; M12, (Option 9701), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (A: Dubuque (T0) Esn -74***89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) M12, Nut; M12 (Use With Toolbox Mount With Front Weights Or Loader), Nut; (A: Saran (Cd) Esn Xxxxxx-) (B: Dubuque (T0) Esn 72***12-) (C: Saran (Cd) Esn -52***15) (D: Dubuque (T0) Esn -74***89) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Dubuque (To) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn Xxxxxx-) (B: Dubuque (T0) Esn -72***11) M12, Nut; (B: Cab Without Mechanical Front Wheel Drive) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***26) M12, Flange Nut; M12, (Standard), Nut; (B: Dubuque (T0) Esn Xxxxxx) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -72***11) (E: Saran (Cd) Esn -Xxxxxx) M12, Nut; (B) M12 (For Lgth = 1600 mm(62,9")), Nut; M12 (Sub (2) 19m7791, (2) E12335 And (2) R273534, This Application), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (To) Esn -74***89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (A: 9550 (69***01-) 9550sh (96***01-)) M12, Nut; (A) (B) M12, Nut; (A: Dubuque (T0) Esn 71***69-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (B: Dubuque (To) Esn -74***89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (Includes Re500778), Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; M12 (Use With Aw23160 Or Aw25451), Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn 51***31) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; (A: Use With Tow-Behind Cart) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (For Dc41481), Nut; M12 Tk=1mm, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Not Used On 1780), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: 9550 (70***01-) 9550sh (70***01-)) M12, Nut; (B) M12 (For Lgth = 2400 mm (94,4")), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Use With Ah166327), Nut; (A: Used With Double Twine Arm.) M12, Nut; (C) (D) (F) M12, Nut; (A: For Rotor-Type Pickup) M12, Nut; (B) (C) M12 (For Lgth = 1600 mm (62,9")), Nut; M12 (Use With Frame Or Hood Guard Mounted Toolbox), Nut; M12, Nut; (A: W/ Power Take-Off) M12, Nut; (A: For 9650 (-70***00) & 9750 (-70***00)) M12, Nut; (A), Nut; (B: For Msl) M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn Xxxxxx-72***11) M12, Nut; M12, For Transmission, Nut; (A: For 1, 81 Meter Pickup) M12, Nut; (A: Used With Tow-Between Cart) M12, Nut; M12 Rh, Nut; M12, R.H., Nut; (C) (D) M12, Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M12, Nut; M12 (Lower Rh), Nut; M12 (Use With H208429), Nut; (E) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; M12 (For Dc35502, Dc41100, Dc54697), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: Dubuque (To) Esn 72***12-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M12, Nut; M12, For Transmission (30" And 36" Row Spacing), Nut; (B: Dubuque (T0) Esn -74***89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (A: With Sound Gard Body) M12, Nut; (B: Used With Tow-Behind Cart) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: (6068hn053)) M12, Nut; (B: For Msl) (C: For Nsl) M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: (6068hn056)) M12, Nut; (A: For 25 Knives Only) M12, Nut; (A: Saran (Cd) Esn 52***16-) (B: Dubuque (T0) Esn 74***90-) M12, Nut; (C: Sound-Gard Body) M12, Nut; M12 (Use With W38632)On 1750, 4, 6, And 8 Row, Nut; (A: Dubuque (To) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (To) Esn Xxxxxx-) (B: Dubuque (To) Esn -72***11) M12, Nut; M12 (For Dc47713), Nut; (A: Extra Heavy Duty) M12, Nut; (B) (C) M12 (For Lgth = 1600 mm(62,9")), Nut, Nut; M12, (Use With H161599), Nut; M12 M16 X 210, Nut; (A: For 5e Series Tractors) M12 Lh, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Saran (Cd) Esn -52***92) (B: Dubuque (T0) Esn -74***89) M12, Nut; (A: Dubuque (To) Esn 71***69-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (C: Regular) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (To) Esn Xxxxxx-72***11) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) M12, Nut; M12 (110" And 132"), Nut; (A: Cab W/Mechanical Front Wheel Drive) (C: Isolated Open Operator Station) M12, Nut; M12 L.H., Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Wide Fender) M12, Nut; M12 (Use With Ah162724 Or Ah145282), Nut; M12 (Use With H202011 Or H202009), Nut; (I: When Mounted On Marker Mast) M12, Nut; (A) (B) (C) (D) M12, Nut; (B) M12 (For Lgth = 2000 mm (78,7")), Nut; (B) M12, Nut; (B: For Msl) M12 (For 2000 mm), Nut; M12 (Center), Nut; M12 (Use With Ah162724 Or Ah207294), Nut; (C) M12, Nut; (A: For Ballast Attachment) M12 For Ballast Attachment, Nut; M12 (E), Nut; M12 Lh, Rh, Nut; (A) M12, Nut; (A: Dubuque (To) Esn 72***12-) (B: Saran (Cd) Esn 51***31-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; M12 (Used On Frames W/O Weld Nuts), Nut; M12 When Mounted On Frame, Nut; M12 (Use With H161599), Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (A: For 14 Knives Only) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Hi Capacity) M12, Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: With Cab) M12, Flange Nut; (K) M12, Nut; (A: Starting From Series Number 625 (06***44-), 630 (06***34-)) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) (B: Dubuque (T0) Esn -72***11) M12, Nut; M12, (Sub For Et11505), Nut; M12, Flange, Nut; M12 (45, 60), Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; (A: Only For 2.0 M Hiflow Pickup) M12, Nut; (A: For 1, 81 M Pickup And 2, 20 M Hiflow Pickup) (B: For Precutter) (C: For 2, 00 Meter Pickup Hiflow) M12, Nut; (B: With Precutter) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (B) (C) (D), Nut; M12 Marker Mast Mounted, Nut; M12 (A) (B), Nut; (D) M12, Nut; M12, (Use With Ah162724 Or Ah145282), Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: For Msl) M12 (For 2400 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; M12 4" (630), Nut; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12, Nut; (A: Dubuque (T0) Esn -74***89) (B: Saran (Cd) Esn -52***92) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; M12 (Includes Re500778), Nut; (A: Conversion Kit, Rotary To Auger) M12, Nut; M12 When Mounted On Marker Mast, Nut; M12, When Mounted On Marker Mast, Nut; (A: Dubuque (T0) Esn -70***94) (B: Saran (Cd) Esn -Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (F: (Xxxxxx-) 8100-02***31; 8200-02***32; 8300-02***59; 8400-02***33) M12, Nut; (C: Up To Series 622 (-08***61), 625 (-08***97), 630 (-08***54)) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -55***82) M12, Flange Nut; M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (To) Esn -74***89) (B: Saran (Cd) Esn -52***92) M12, Nut; (A: Saran (Cd) Esn Xxxxxx-) (B: Dubuque (To) Esn 72***12-) (C: Saran (Cd) Esn -52***15) (D: Dubuque (To) Esn -74***89) M12, Nut; M12 (Sub For A31867), Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -53***64) M12, Nut; M12 Frame Mounted, Nut; M12, (Sub (2) 19m7791, (2) E12335 And (2) R273534, This Application), Nut; (A: For 2, 20 Meter Pickup) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn 51***31-52***92) M12 (Option 9701), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Up To Series 625 (-06***43), 630 (-06***33)) M12, Nut; (C: Lower Right Hand) M12, Nut; (E: (-Xxxxxx) 8100-02***30; 8200-02***31; 8300-02***58; 8400-02***32) M12, Nut; M12, (Use With Ah207294), Nut; (A: Included In Ae48634) M12, Nut; (A: Isolated Open Operator Station) (C: Cab W/Mechanical Front Wheel Drive) M12, Nut; (A: Only For 1.8 M Pickup) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn 72***12-) (B: Saran (Cd) Esn 51***31-) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12, Nut; M12 (A), Nut; (A: For Prodrive) M12, Nut; (A: Use Only For Kernel Processor Quick Conversion) M12, Flange Nut, Nut; M12, (Use With Ah145282 Or Ah162724), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) M12, Nut; M12, M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) (C: Torreon (Pe) Esn Xxxxxx-53***64) M12, Nut; (A: Cab With Mechanical Front Wheel Drive) (C: Isolated Open Operator Station) M12, Nut; M12 (Not Used With Field Installed Loader Backhoe), Nut; (A: W/O Second Curtain) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; M12, Rh, Nut; (H: When Mounted On Frame) M12, Nut; (C: Up To Series 2111 (-13425), 2113 (-13421), 2115 (-13405)) (D: Up To Series 2117 (-13415), 2122 (-13423), 2126 (-06***05)) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: (618/620) Rigid) M12, Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; M12 (Use With Ah162724), Nut; M12 Lh, Nut; M12 Tow-Behind, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12 | 4 |
John Deere : 640a - Front Loader : 80 Frame, Miscellaneous : Mounting Frame And Toolbox Bracket (40, 50 Series Tractors) [B20]
| 03***03 | Bolt, Bolt; 5/8" X 2" Cb5nc0.62x02.00, Bolt; 5/8" X 2", Bolt; Rd. Hd. 5/8" X 2", Bolt; 0,625" X 2,0", Bolt; 5/8" X 2", (Use With N184323), Bolt; 5/8" X 2", (2510, 3010, 3020, 4010 And 4020 Tractors) | 4 |
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 6 |
| 14***84 | Nut; M12 (Use With (1) W38233) (Slotted), Nut; M12 (Use With W33908) (Slotted), Nut; M12, Nut; M12 (Use With W38233) (Slotted), Nut; (A: For Adjustable Rear Axle) M12, Nut; M12 (Slotted) (Use With W38233), Nut; M12 (Use With 19m6575) | 2 |
John Deere : 640a - Front Loader : 80 Frame, Miscellaneous : Mounting Frame And Toolbox Bracket (6000 Series Tractors) [B19]
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 2 |
| 14***75 | Nut; M12 Mst, Nut; M12, For Plastic Trash Board, Nut; (A: For Msl) (B: For Nsl) M12 (For Dc203954), Nut; (E: 26"X9"X14.5"-24pr Severe Duty Ag Tire) (D: 24"X8"X14"-20pr Severe Duty Ag Tire) M12, Nut; (A: (6068hn056)) M12, Nut; M12, (Sub For Ch12391), Nut; M12, (Sub For 14m7031), Nut; M12 (Not Used This Application), Nut; M10, Nut; (A) (B) M12 (For Dc53630 Or Dc203952), Nut; (D) (E) M12, Nut; M12 (Sub For M520012), Nut; M12 (1 Per Tine), Nut; M12 (Sub For Er022122, Appl), Nut; M12, (Use With Ch14525 Bracket), Nut; 12 mm, Nut, Nut; M12, For Steel Trash Board, Nut; (A: 24"X8"X14"-20pr Severe Duty Ag Tire) M12, Nut; M12 (Use With Aw21924), Nut; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12, Nut; M12 (For Dc204796), Nut; M12 (Sub For J950012), Nut; M12 (Sub For Er022122 Appl), Nut; M12, (Sub For Ffsb107245), Nut; (A: Used In High Clearance Tractors Too) M12, Nut; (A: For Type Msl) (B: For Type Nsl/Hsl) M12 (For Dc203952), Nut; M12, (Use With Aw21924), Nut; M12 (Use With 12h301), Nut; M12, (Use With 19m8322), Nut; M12 (European), Nut; When Using Dry Fertilizer Only, Nut; (A: With Autopowr Transmission) M12, Nut; M12 With Mechanical Front Wheel Drive, Nut; (A) M12 (For Dc53631 Or Dc203954), Nut; M12 (For Dc203954), Nut; M12 (Use With 19m8322), Nut; M12 Mount Motor, Nut; M12 (Use With W38233) (Slotted), Nut; M12, Nut; (A) M12 (For Dc53632 Or Dc203956), Nut; (B) M12, Nut; (A: For 2, 20 Meter Pickup) M12, Nut; M12 (C) (D), Nut; (A: 5303 (00***14-), 5403 (00***76-), 5503 (00***01-).) M12, Nut; M12 (31***23 Nla) (Sub For J951012), Nut; M12, (Use With W38849), Nut; (A) M12, Nut; (B: W/O Cab) M12, Nut; M12 31***23 Nla Sub For J951012, Nut; M12 (Sub For 14h809), Nut; (A: Required For Field Conversion To Diverter Valve On Independent Marker System) M12, Nut; (C) M12, Nut; (A: For Fork-Type Pickup) M12, Nut; (A: For 1, 81 Meter Pickup) M12, Nut; M12 Rh, Nut; (C) (D) M12, Nut; M12, (A), Nut; M12 M12 Kw.10 Jds118, Nut; M12 (For Dc203956), Nut; 12mm, Nut; M12 (Used On Frames W/Weld Nuts), Nut; (A: 8 Used On Aw20998;9 Used On Aw25322 & Aw25323;10 Used On Aw21000;12 Used On Aw21001 & Aw22984) M12, Nut; (A: For Msl) M12 (For Dc203956), Nut; M12 Used If Tractor Does Not Have Weld Nuts Inside Frame, Nut; M12 (For Dc204798), Nut; (A: For Type Msl) (B: For Type Nsl/Hsl) M12 (For Dc203954), Nut; M12 (B), Nut; M12 (Sub For (1) J950012)(Not Illustrated), Nut; M12 M12, Nut; M12 (Sub For J231212 Or J950012), Nut; M12 (A), Nut; (A: Syncshuttle Transmission - 5420: Sn 44***60-, 5520: Sn 45***01-) M12, Nut; M12 Jam, Nut; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12, Nut; M12 Use With Re301596, Nut; M12, When Using Dry Fertilizer Only, Nut; M12 (For Dc203952), Nut; M12 (Slotted) (Use With W38233), Nut; M12, (3015df002) (Sub For Ch12391), Nut; M12 (Hs=10.9), Nut; 12x1.75mm (Sub For 14m3246), Nut; M12 (Apply High Strength Locktite To Thread 15 mm (0.6") Below Cap Screw Head To Retain Nut), Nut; M12, (Sub For J950012), Nut; M12 (For Dc204797), Nut; (A: Required With Piston Pump Fertilizer System.) M12, Nut; (Sub For J950012), Nut; (A: For 575 With Pick Up W/O Precutter) M12, Nut; (A) (B) M12 (For Dc53631 Or Dc203954), Nut; M12 M12 Jds118, Nut; M12, (4019) (Sub For Ch12391), Nut; (B) M12, Nut; (A: (6068hn053)) M12, Nut; (A: For Type Msl) M12 (For Dc203956), Nut; (A: Windrower Option Only) M12, Nut; M12, For Dry Fertilizer Only, Nut; M12 38-Inch Row Spacing Only, Nut; (D) M12, Nut; (A: For Msl) (B: For Nsl) M12 (For Dc203952), Nut; M12, Nut; (Sub For Ffsb107245), Nut; (A) M12 (For Dc53630 Or Dc203952), Nut; M12, (3015df106) (Sub For Ch12391), Nut; (C: 26"X9"X14.5"-24pr Severe Duty Ag Tire) (D: 24"X8"X14"-20pr Severe Duty Ag Tire) M12, Nut; (Sub For J231212), Nut; M12, (Use With Ah209784) | 1 |
| 14***99 | Nut; M12 (Sub For A31867 This Application), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; (A: For 9650 (70***01-) & 9750 (70***01-)) M12, Flange Nut; (Use With 135 Amp), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: For 9650 (-69***95) & 9750 (-69***24)) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn Xxxxxx-) (C: Torreon (Pe) Esn All) M12, Nut; (A: For 9650 (69***96-) & 9750 (69***25-)) M12, Nut; M12 (Fine Cut Conversion), Nut; M12 (132"), Nut; (J: Without Liquid Fertilizer) M12, Nut; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Saran (Cd) Esn 52***16-) (B: Dubuque (To) Esn 74***90-) M12, Nut; M12 (For Dc41181), Nut; M12 (Low R.H.), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (B: Cab W/O Mechanical Front Wheel Drive) M12, Nut; (A: Only For 2, 0 M Hiflow Pickup) M12, Nut; M12 (Use With Ah207294), Nut; M12 (Lower Rh), Nut; (B) M12 (For Lgth = 1600 mm (62,9")), Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (B: Flight) M12, Nut; (A) (B: Dubuque (To) Esn 71***69- 74***89), Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: From Sr.No.5310s(00***84-), 5410(00***19-), 5610(00***01-).) M12, Nut; M12 (For Use With 4th And 5th Scv Kit, Lv150130), Nut; (B: Dubuque (T0) Esn 72***12) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -74***89) (E: Saran (Cd) Esn -52***26) M12, Nut; (B: Dubuque (T0) Esn Xxxxxx-72***11) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) M12, Nut; M12, When Mounted On Frame, Nut; (C: High Capacity) M12, Nut; (A: For Tractors With Open Operator' S Station) (B: For Tractors With Cab) M12 M12, Nut; (A: For 9650 (70***01-) & 9750 (70***01-)) M12, Nut; M12 (For Lgth = 1600 mm (62,9")), Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M12, Nut; (B: Dubuque (T0) Esn 72***12) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -74***89) (E: Saran (Cd) Esn -52***92) M12, Nut; (A: Isolated Open Operator Station) (C: Cab With Mechanical Front Wheel Drive) M12, Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -53***64) M12, Nut; M12 (B), Nut; M12, (Use With Aw23160 Or Aw25451), Nut; M12 2112c Only, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Use With W38632) On 1750, 4, 6, And 8 Row, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; (A: Use With Two-Rank Machine, 60, 000 Lb. Safety Chain Attachment) M12, Nut; M12 (Use With Ah148279), Nut; M12 M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Flange Nut; M12, (High Ambient), Nut; (A: -Xxxxxx (9550, -69***29)(9550sh, -69***17)) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; M12 (B) (914), Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: 9550 (69***01-) 9550sh (69***01-)) M12, Nut; (A: 9550 (-69***00) 9550sh (-69***00)) M12, Nut; M12, (Option 9701), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (A: Dubuque (T0) Esn -74***89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) M12, Nut; M12 (Use With Toolbox Mount With Front Weights Or Loader), Nut; (A: Saran (Cd) Esn Xxxxxx-) (B: Dubuque (T0) Esn 72***12-) (C: Saran (Cd) Esn -52***15) (D: Dubuque (T0) Esn -74***89) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Dubuque (To) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn Xxxxxx-) (B: Dubuque (T0) Esn -72***11) M12, Nut; (B: Cab Without Mechanical Front Wheel Drive) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***26) M12, Flange Nut; M12, (Standard), Nut; (B: Dubuque (T0) Esn Xxxxxx) (C: Saran (Cd) Esn Xxxxxx) (D: Dubuque (T0) Esn -72***11) (E: Saran (Cd) Esn -Xxxxxx) M12, Nut; (B) M12 (For Lgth = 1600 mm(62,9")), Nut; M12 (Sub (2) 19m7791, (2) E12335 And (2) R273534, This Application), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (To) Esn -74***89) (B: Saran (Cd) Esn -Xxxxxx) (C: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (A: 9550 (69***01-) 9550sh (96***01-)) M12, Nut; (A) (B) M12, Nut; (A: Dubuque (T0) Esn 71***69-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (B: Dubuque (To) Esn -74***89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (Includes Re500778), Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; M12 (Use With Aw23160 Or Aw25451), Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn 51***31) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; (A: Use With Tow-Behind Cart) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (For Dc41481), Nut; M12 Tk=1mm, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Not Used On 1780), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: 9550 (70***01-) 9550sh (70***01-)) M12, Nut; (B) M12 (For Lgth = 2400 mm (94,4")), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (Use With Ah166327), Nut; (A: Used With Double Twine Arm.) M12, Nut; (C) (D) (F) M12, Nut; (A: For Rotor-Type Pickup) M12, Nut; (B) (C) M12 (For Lgth = 1600 mm (62,9")), Nut; M12 (Use With Frame Or Hood Guard Mounted Toolbox), Nut; M12, Nut; (A: W/ Power Take-Off) M12, Nut; (A: For 9650 (-70***00) & 9750 (-70***00)) M12, Nut; (A), Nut; (B: For Msl) M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn Xxxxxx-72***11) M12, Nut; M12, For Transmission, Nut; (A: For 1, 81 Meter Pickup) M12, Nut; (A: Used With Tow-Between Cart) M12, Nut; M12 Rh, Nut; M12, R.H., Nut; (C) (D) M12, Nut; (A: Swivel Tongue) (B: Linkage Drawbar Tongue) M12, Nut; M12 (Lower Rh), Nut; M12 (Use With H208429), Nut; (E) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; M12 (For Dc35502, Dc41100, Dc54697), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: Dubuque (To) Esn 72***12-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) M12, Nut; M12, For Transmission (30" And 36" Row Spacing), Nut; (B: Dubuque (T0) Esn -74***89) (C: Saran (Cd) Esn -Xxxxxx) (D: Torreon (Pe) Esn -Xxxxxx) M12, Nut; (A: With Sound Gard Body) M12, Nut; (B: Used With Tow-Behind Cart) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: (6068hn053)) M12, Nut; (B: For Msl) (C: For Nsl) M12 (For 1600 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: (6068hn056)) M12, Nut; (A: For 25 Knives Only) M12, Nut; (A: Saran (Cd) Esn 52***16-) (B: Dubuque (T0) Esn 74***90-) M12, Nut; (C: Sound-Gard Body) M12, Nut; M12 (Use With W38632)On 1750, 4, 6, And 8 Row, Nut; (A: Dubuque (To) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Only For 1, 81 M Or 2, 2 M Hiflow Pickup) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (To) Esn Xxxxxx-) (B: Dubuque (To) Esn -72***11) M12, Nut; M12 (For Dc47713), Nut; (A: Extra Heavy Duty) M12, Nut; (B) (C) M12 (For Lgth = 1600 mm(62,9")), Nut, Nut; M12, (Use With H161599), Nut; M12 M16 X 210, Nut; (A: For 5e Series Tractors) M12 Lh, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Saran (Cd) Esn -52***92) (B: Dubuque (T0) Esn -74***89) M12, Nut; (A: Dubuque (To) Esn 71***69-) (B: Saran (Cd) Esn Xxxxxx-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (C: Regular) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (To) Esn Xxxxxx-72***11) (C: Saran (Cd) Esn Xxxxxx-Xxxxxx) M12, Nut; M12 (110" And 132"), Nut; (A: Cab W/Mechanical Front Wheel Drive) (C: Isolated Open Operator Station) M12, Nut; M12 L.H., Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Wide Fender) M12, Nut; M12 (Use With Ah162724 Or Ah145282), Nut; M12 (Use With H202011 Or H202009), Nut; (I: When Mounted On Marker Mast) M12, Nut; (A) (B) (C) (D) M12, Nut; (B) M12 (For Lgth = 2000 mm (78,7")), Nut; (B) M12, Nut; (B: For Msl) M12 (For 2000 mm), Nut; M12 (Center), Nut; M12 (Use With Ah162724 Or Ah207294), Nut; (C) M12, Nut; (A: For Ballast Attachment) M12 For Ballast Attachment, Nut; M12 (E), Nut; M12 Lh, Rh, Nut; (A) M12, Nut; (A: Dubuque (To) Esn 72***12-) (B: Saran (Cd) Esn 51***31-) (C: Dubuque (To) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; M12 (Used On Frames W/O Weld Nuts), Nut; M12 When Mounted On Frame, Nut; M12 (Use With H161599), Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (A: For 14 Knives Only) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: Dubuque (To) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: Hi Capacity) M12, Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; (A: With Cab) M12, Flange Nut; (K) M12, Nut; (A: Starting From Series Number 625 (06***44-), 630 (06***34-)) M12, Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn 55***83-) (D: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) (B: Dubuque (T0) Esn -72***11) M12, Nut; M12, (Sub For Et11505), Nut; M12, Flange, Nut; M12 (45, 60), Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; (A: Only For 2.0 M Hiflow Pickup) M12, Nut; (A: For 1, 81 M Pickup And 2, 20 M Hiflow Pickup) (B: For Precutter) (C: For 2, 00 Meter Pickup Hiflow) M12, Nut; (B: With Precutter) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12, Nut; M12 (B) (C) (D), Nut; M12 Marker Mast Mounted, Nut; M12 (A) (B), Nut; (D) M12, Nut; M12, (Use With Ah162724 Or Ah145282), Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; (B: For Msl) M12 (For 2400 mm), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***27-) (C: Torreon (Pe) Esn All) M12, Nut; M12 4" (630), Nut; (A: For 1, 41 Meter Pickup) (B: For 1, 81 Meter Pickup) M12, Nut; (A: Dubuque (T0) Esn -74***89) (B: Saran (Cd) Esn -52***92) M12, Nut; (B: Dubuque (To) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***26) M12, Nut; M12 (Includes Re500778), Nut; (A: Conversion Kit, Rotary To Auger) M12, Nut; M12 When Mounted On Marker Mast, Nut; M12, When Mounted On Marker Mast, Nut; (A: Dubuque (T0) Esn -70***94) (B: Saran (Cd) Esn -Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***15) M12, Nut; (F: (Xxxxxx-) 8100-02***31; 8200-02***32; 8300-02***59; 8400-02***33) M12, Nut; (C: Up To Series 622 (-08***61), 625 (-08***97), 630 (-08***54)) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-52***15) M12, Nut; (A: Dubuque (T0) Esn 72***12) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -55***82) M12, Flange Nut; M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Dubuque (To) Esn -74***89) (B: Saran (Cd) Esn -52***92) M12, Nut; (A: Saran (Cd) Esn Xxxxxx-) (B: Dubuque (To) Esn 72***12-) (C: Saran (Cd) Esn -52***15) (D: Dubuque (To) Esn -74***89) M12, Nut; M12 (Sub For A31867), Nut; (A: Dubuque (T0) Esn 71***69) (B: Saran (Cd) Esn Xxxxxx) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -53***64) M12, Nut; M12 Frame Mounted, Nut; M12, (Sub (2) 19m7791, (2) E12335 And (2) R273534, This Application), Nut; (A: For 2, 20 Meter Pickup) M12, Nut; (A: Dubuque (T0) Esn 72***12-74***89) (B: Saran (Cd) Esn 51***31-52***92) M12 (Option 9701), Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (To) Esn 72***12-74***89) (B: Saran (Cd) Esn Xxxxxx-55***82) M12, Nut; (A: Up To Series 625 (-06***43), 630 (-06***33)) M12, Nut; (C: Lower Right Hand) M12, Nut; (E: (-Xxxxxx) 8100-02***30; 8200-02***31; 8300-02***58; 8400-02***32) M12, Nut; M12, (Use With Ah207294), Nut; (A: Included In Ae48634) M12, Nut; (A: Isolated Open Operator Station) (C: Cab W/Mechanical Front Wheel Drive) M12, Nut; (A: Only For 1.8 M Pickup) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 53***65-) (C: Torreon (Pe) Esn All) M12, Nut; (A: Dubuque (T0) Esn 72***12-) (B: Saran (Cd) Esn 51***31-) (C: Dubuque (T0) Esn -74***89) (D: Saran (Cd) Esn -52***92) M12 (Option 9701), Nut; (B: Dubuque (T0) Esn 74***90-) (C: Saran (Cd) Esn Xxxxxx-) (D: Torreon (Pe) Esn Xxxxxx-) M12, Nut; (A: For 1, 81 Meter Pickup) (B: For 2, 20 Meter Pickup (Hiflow)) M12, Nut; M12 (A), Nut; (A: For Prodrive) M12, Nut; (A: Use Only For Kernel Processor Quick Conversion) M12, Flange Nut, Nut; M12, (Use With Ah145282 Or Ah162724), Nut; (A: Dubuque (To) Esn 74***90-) (B: Saran (Cd) Esn 52***93-) M12, Nut; (A: Only For 1.8 M Or 2.2 M Hiflow Pickup) M12, Nut; M12, M12, Nut; (A: Dubuque (T0) Esn -Xxxxxx) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) (C: Torreon (Pe) Esn Xxxxxx-53***64) M12, Nut; (A: Cab With Mechanical Front Wheel Drive) (C: Isolated Open Operator Station) M12, Nut; M12 (Not Used With Field Installed Loader Backhoe), Nut; (A: W/O Second Curtain) M12, Nut; (A: Dubuque (T0) Esn 71***69-74***89) (B: Saran (Cd) Esn Xxxxxx-53***64) M12, Nut; M12, Rh, Nut; (H: When Mounted On Frame) M12, Nut; (C: Up To Series 2111 (-13425), 2113 (-13421), 2115 (-13405)) (D: Up To Series 2117 (-13415), 2122 (-13423), 2126 (-06***05)) M12, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 52***16-) M12, Nut; (A: (618/620) Rigid) M12, Nut; (B: Dubuque (T0) Esn 72***12-74***89) (C: Saran (Cd) Esn Xxxxxx-52***92) M12, Nut; M12 (Use With Ah162724), Nut; M12 Lh, Nut; M12 Tow-Behind, Nut; (A: Dubuque (T0) Esn 74***90-) (B: Saran (Cd) Esn 55***83-) (C: Torreon (Pe) Esn All) M12 | 2 |
John Deere : 640a - Front Loader : 80 Frame, Miscellaneous : Parking Stands [B18]
| 19***62 | Bolt; M10 X 30 (6000 Series Only) (Used With 2.29 M (7.5 Ft) Harness), Bolt; M10 X 30 M10x30 (10.9), Bolt; M10 X 30 Sub For J011030, Bolt; M10 X 30 (Sub For J021030), Bolt; (D: With Creeper) M10 X 30, Bolt; M10 X 30, (C), (D), Bolt; M10x1,5x30, Bolt; (B) M10 X 30, Bolt; M10 X 30 (Hs, Head Marked 10.9) (Use With Ar92109), Bolt; M10 X 30 (Sub For Ra1014011), Bolt; (D: With Creeper) M10 X 30 (Hs, Head Marked 10.9), Cap Screw; M10 X 30, ( Ffsb107459 Not Available For Service-Furnis, Cap Screw; (Sub For J031030) (Also Order 24m7346 And 12m7058), Bolt; M10 X 30 (Hs, Head Marked 10.9), Bolt; M10 X 30 (Use With (1) 07***01)(Not Illustrated), Bolt; (C: With Creeper Kit) M10 X 30 (Hs=10.9), Bolt; M10 X 30 (Sub For J281030 Or J901030), Bolt; 10x30mm (Sub For 19m7514), Bolt; M12x30, Cap Screw; (Sub For J971030), Cap Screw; M10 X 30, (Sub For Ffsb109187), Cap Screw; (Sub For J031030) (Also Order 12m7058 And 24m7047), Bolt; (B: With Creeper) M10 X 30, Bolt; M10 X 30, (3 Function), Bolt; M 10x30, Bolt; M10 X 30, (Sub For M801201), Bolt; M10 X 30 (Sub For M801201), Bolt; M10 X 30 (10.9), Bolt; M10 X 30, (Use With Ar92109), Bolt; (D) M10 X 30 (Hs, Head Marked 10.9), Bolt; M10 X 30 ( J271030 Nla) (Sub For J901030), Bolt; M10 X 30 (Use With 07***08), Bolt; M10 X 30, (10.9), Bolt; M10 X 30 (Hs, Head Marked 10,9) (Use With Ar92109), Bolt; (B: W/ Creeper Kit) M10 X 30, Bolt; M10 X 30, Bolt; M10 X 30 (10.9) mm, Bolt; M10 X 30 (Hs, Head Marked 10.9) (Sub For 19m7168, This Application) (Sub For Ch12028), Cap Screw; M10 X 30, (Sub For Ffsb106133), Bolt; (Sub For J901030), Bolt; M10 X 30 (Sub For 46***14) (Also Order 12m7066), Bolt; M10 X 30 (Sub For J901030), Bolt; M10 X 30 (Sub For J021025), Bolt; M10 X 30 (Sub For At255985), Bolt; 10x30mm (Sub For 19h1731), Bolt; M10 X 30 (Also Order 24m7346 ) (Sub For J271030), Bolt; M10 X 30 (Sub For 19m7786, Or 19m7835this Application), Cap Screw; M10 X 30, (Sub For Ffsb109178 Or At153806), Bolt; (Sub For J031030) (Also Order 19m7662 And 12m7058), Bolt; M10 X 30, (Sub For (4) M801201), Cap Screw; M10 X 30, (Sub For J021030), Bolt; M10 X 30 (Sub For J011030), Bolt; M10 X 30 (Use With 12m7066), Bolt; M10x30 (10.9), Bolt; M10 X 30 Sub For J031030, Bolt; M10 X 30 (Sub For Er127921 Appl), Bolt; (B: Straddle Mount) M10 X 30 (Hs=10.9), Bolt; (A: With Creeper) M10 X 30, Bolt; M10 X 30 Standard Dipperstick, Bolt; M10 X 30 Hs 10.9, Cap Screw; M10 X 30, (Sub For J031030), Bolt; M10 X 30 Hs=10.9, Bolt; M10 X 30 Hs=10.9 (Use With R131372), Bolt; M10 X 30 (Sub For Er020852 Appl), (Sub For J031030) (Also Order 12m7058 And 24m7346), Cap Screw; M10 X 30, (Also Order 12m7067 And 24m7346) (Sub For Ffsb109178 Or At153806), Cap Screw; M10 X 30, (Sub For Ffsb109176), Cap Screw; M10 X 30, (Sub For 44***53 Or J971030), Bolt; (D: With Creeper) M10 X 30 Hs=10.9, Cap Screw; (Sub For Ffsb107141), Bolt; M10 X 30 Hs, 10.9, M10 X 30, Bolt; (B: With Creeper Kit) M10 X 30 (Hs=10.9), Bolt; (A: With Cab) M10 X 30 (Sub For Er020852, Appl), Bolt; M10 X 30 (Hs=10.9), Bolt; M10 X 30 (Hs, Head Marked 10 .9) (Use With Ar92109), Bolt; M10 X 30 (Sub For At255973), Bolt; M10 X 30 (Sub For J031030), Bolt; M10 X 30, (Sub For M801201) M10x30, Cap Screw; M10 X 30, (Sub For Ffsb106133) (Rear), Cap Screw; M10 X 30, (Sub For J921030), Bolt; (A) (B) M10 X 30, Cap Screw; M10 X 30, (Sub For At153806) (Also Order 19m7662 And 24m7346), Bolt; M10 X 30 (Use With R207765), Bolt; M10 X 30 (Sub For Er021116 Appl), Bolt; M10 X 30 M10x30, Cap Screw; M10 X 30, (Not Illustrated), Bolt, Cap Screw, Cap Screw; M10 X 30, (Sub For J901030), Cap Screw; (Sub For J031030) (Also Order 12m7058 And 24m7180), Cap Screw; M10 X 30, (Sub For Ffsb109178 And At153806), Bolt; M10 X 30 (Hs, Head Marked 10.9) Heater Hose Clamp, Cap Screw; M10 X 30, (Sub For Ffsb106133 And J021030), Bolt; M10 X 30 Hs10.9, Bolt; (Sub For J011030), Bolt; 10x30mm, Cap Screw; M10 X 30, Cap Screw; (Sub For Ffsb106133), Bolt; (B: With Creeper Kit) M10 X 30 (Hs, Head Marked 10.9), Cap Screw; (Sub For J901030), Cap Screw; M10 X 30, (Sub For At153806 And Ffsb109178), Bolt; M10 X 30 (Sub For J271030 ) (Also Order 24m7346), Bolt; M10 X 30 (Sub For (1) J901030)( J271030 Nla), Cap Screw; M10 X 30, (Sub For Ffsb107141), Bolt; 10 mm X 30 mm (3/8" X 1-3/16"), Cap Screw; (Sub For J031030) (Also Order 12m7058 And 24m7346), Cap Screw; (Sub For J011030), Bolt; M10 X 30 (With Creeper), Bolt; M10x30, Cap Screw; M10 X 30, (Sub For Ffsb107459), Bolt; M10 X 30 Sub For J021030, Bolt; M10 X 30 (Hs 10.9), Bolt; M10 X 30 (Sub For Er021236 Appl), Bolt; (Sub For (4) M801201), Bolt; M10 X 30 (Sub For J051030), Bolt; M10 X 30 (Sub For 46***14), Bolt; M10 X 30 (Sub For J921030), Bolt; M10 X 30 Sub For J051030, Bolt; (B: W/Creeper Kit) M10 X 30, Bolt; (A) (B) M10x30, Bolt; M10 X 30 Torque To 60 Lb-Ft(81 N-M) | 4 |
| AW***62 | Pin Fastener; (Sub For Aw21820) (Sub Pm01601), Pin Fastener; (Ord Dc42254), Pin Fastener, Pin Fastener; (Sub For W27461 Or Aw21820) (Sub Ty15737) | 2 |
| AW***38 | Guide | 2 |
Parts Catalog
John Deere : 640a - Front Loader : Parts Catalog : Parts Catalog
Need a specific 640A - FRONT LOADER part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.
Post a parts request and compare supplier quotes.