John Deeredisk(no series)
John Deere 640 - DISK
Specifications · OEM parts breakdown
Post a parts request and compare supplier quotes.
John Deere 640 - DISK specifications
Source specifications
| Pressure | 2900 psi |
| Pump flow | 55 gpm |
| SCV flow | 35 gpm |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
640 - DISK common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| AE14428 | Elbow Fitting | Scheduled service item | Check fitment → |
| AN260207 | Filter | Scheduled service item | Check fitment → |
| U12547 | O-Ring | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
All 640 - DISK assemblies by section
Every catalogued assembly group for the John Deere 640 - DISK. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
3" X 8" Hydraulic Cylinder (Eaton) [C06]
John Deere : 640 - Disk : 3" X 8" Hydraulic Cylinder (Eaton) [C06]
| A4***85 | End, End; (Use With An260360), End; (Use With An260477), End; (B), End; (Use With An260361), End; (Use With An240669), End; (Use With An260363), End; (Use With An240667), End; (Use With An260192), End; (Use With An240668) | 1 |
| AN***33 | Seal Kit; (Sub Ah176569 ) (Use With An260360), Seal Kit; (Use With An260360), Seal Kit; (Sub Ah176569), Seal Kit, Seal Kit; (Sub Ah176569 ) (Use With An240667), Seal Kit; (A) (B) (Sub Ah176569) (Use With An240667), Seal Kit; Seal Kit For An260360, 3" X 8" Cylinder, Seal Kit; (A: Seal Kit For An260360, 3" X 8" Cylinder), Seal Kit; (Use With An260192) (Sub Ah176569), Seal Kit; (Sub Ah176569) (Use With An260360), Seal Kit; (B) (Includes Parts Marked (A)), Seal Kit; 3" X 8" Cylinder Seal Kit For An260361, Seal Kit; (For An260192), Seal Kit; (Sub Ah176569) Seal Kit For An260192, 3" X 8" Cylinder, Seal Kit; (Sub Ah176569)Seal Kit For An260499, 3" X 8" Cylinder, Seal Kit; (A: Seal Kit For An260360, 3" X 8" Cylinder) (Sub Ah176569) | 1 |
| AN***60 | Hydraulic Cylinder; 3" X 8" (Sub Ah176369 And Ah176368), Hydraulic Cylinder; (Sub Ah176368) Complete, Hydraulic Cylinder; (D: Complete Cylinder), Hydraulic Cylinder; 10 Ft; 3" X 8" (Sub Ah176369), Hydraulic Cylinder; Complete (Includes Parts Marked (B)), Hydraulic Cylinder; (Sub Ah176369 And Ah176368) 3" X 8", Hydraulic Cylinder; (Eaton) (Sub Ah176369 And Ah176368), Hydraulic Cylinder; (Sub Ah176369 And Ah176368), Hydraulic Cylinder; Assembly 3" X 8", Hydraulic Cylinder; 3" X 8" (Eaton) (Sub Ah176369 And Ah176368), Hydraulic Cylinder; (Sub Ah176369), Hydraulic Cylinder; (Sub Ah176369 And Ah176368)3" X 8", Hydraulic Cylinder; (A) Use With All John Deere Tractors Except The 8000 Series With Single Lever Control Of The Lift Assist Wheels (Sub For Aa53145, 3" X 8" Prince Cylinder), Hydraulic Cylinder; (Sub Ah176369 And Ah176415), Hydraulic Cylinder, Hydraulic Cylinder; (Sub Ah176369 And Ah176368) 10 Ft., Hydraulic Cylinder; (Eaton), (Sub Ah176369), Hydraulic Cylinder; Use With All Tractors Except 8000 Series John Deere Tractors With Single Lever Control Of The Lift Assist Wheels, Hydraulic Cylinder; (Eaton), (Sub Ah176369 And Ah176368), Hydraulic Cylinder; (Sub Ah176369) 3" X 8", Hydraulic Cylinder; (Sub Ah176369 And Ah176368) 15 Ft., Hydraulic Cylinder; (Eaton) (Sub Ah176369), Hydraulic Cylinder; (Sub Ah176369 And Ah176368) 3" X 8"; 10 Ft And 20 Ft, Hydraulic Cylinder; (Sub Ah176369)3" X 8", Hydraulic Cylinder; 3" X 8" Complete Cylinder (Sub For Aa53145, Prince Cylinder), Hydraulic Cylinder; Complete (Sub For Aa53145, 3" X 8" Prince Cylinder), Hydraulic Cylinder; Assembly, Hydraulic Cylinder; (Sub Ah176369)Sub For Aa53145, 3" X 8" Prince Cylinder, Hydraulic Cylinder; Use With All John Deere Tractors Except The 8000 Series With Single Lever Control Of The Lift Assist Wheels (Sub For Aa53145, 3" X 8" Prince Cylinder), Hydraulic Cylinder; 10 Ft (3 M); 3" X 8" (Eaton) (Sub Ah176369 And Ah176368), Hydraulic Cylinder; (Sub Ah176369) Complete (Includes Parts Marked (B)), Hydraulic Cylinder; (Sub For Re24010) (Sub Ah176369), Hydraulic Cylinder; 10 Ft (3 M) And 20 Ft (6 M); 3" X 8" (Eaton) (Sub Ah176369 And Ah176368), Hydraulic Cylinder; 76.2 mm X 203.2 mm (3" X 8"); Use With All John Deere Tractors Except The 8000 Series With Single Lever Control Of The Lift Assist Wheels, Hydraulic Cylinder; 7000 Series Tractors (Sub For Aa53145, 3" X 8" Prince Cylinder), Hydraulic Cylinder; 3" X 8" 7000 Series Tractors (Sub For Aa53145, Prince Cylinder) | 1 |
3" X 8" Hydraulic Cylinder (John Deere) (13'-10" Through 15'-3" Depth Control) [C05]
John Deere : 640 - Disk : 3" X 8" Hydraulic Cylinder (John Deere) (13'-10" Through 15'-3" Depth Control) [C05]
| 14***65 | Nut; Low, Nut; 1/2" (Use With 24m7240)(Replaces E69392), Nut; 12.700 mm, Nut; 12.700 mm (1/2") Unf, Nut; 1/2" (Larger Tie Rod), Nut; 1/2" Low, Nut; 1/2"-20unf, Nut; (A) 1/2", Low, Nut; (A) 1/2", Nut; 1/2" Lower, Nut; (Sub For R101224) 1/2"-20unf, Nut; 1/2" (A), Nut; 1/2",Low, Nut, Nut; (A: Amber Light And Bracket Assembly) 1/2" (C) (D), Nut; X X X 1/2", Nut; (A) 1/2",Low |, Nut; (C: 14 In. Tire) 1/2", Nut; 1/2" (A) (B), Nut; 1/2" 1/2"-20 Unf, Nut; (For 19h3011), Nut; 1/2", Nf (5 Used L.H.) (5 Used R.H.), Nut; (A: 10 In. Tire) 1/2", Nut; 1/2", Nut; Low 1/2", Nut; (B: 12 In. Tire) 1/2", Nut; (A), Nut; (A) 1/2" Low, Nut; 1/2", (Use With Es10785), Nut; 1/2" (Sub For 14h389), Nut; (A) Low, 1/2", Nut; (A: Amber Light And Bracket Assembly) 1/2" (C)(D), Nut; 1/2", Unf, Nut; 1/2" (For 19h3011), Nut; 1/2" Unf, Nut; 1/2" Unf, 1/2", Nut; 1/2" (12" Tires), Nut; 1/2", Low, Nut; Low, 1/2", Nut; 1/2", (Use With Am102676), Nut; 1/2" (A), (B), Nut; 1/2" (Replaces Flange Nut) (Use With 24m7240), Nut; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 1/2", Nut; 1/2" Sub For 14h389, Nut; 1/2" 1/2"-20unf, Nut; (A: Pe3029dkv51/55 (240 High Flow) & Pe3029tkv51 (250 High Flow)) 1/2", Nut; 1/2", (Sub For B11124), Nut; (A) (B) 1/2", Nut; (A: Amber Warning Light And Bracket Assembly) 1/2", Nut; (A) (C) (D) 1/2", Nut; (Sub For B11124) | 4 |
| 19***21 | Cap Screw; (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (20'-9" Through 32'-1"), Cap Screw; 3/8" X 5/8", (A/C Adapted To Pressurized Cab), Cap Screw; 3/8" X 5/8" (17'-1" And 18'-3"), Cap Screw, Cap Screw; 3/8"X5/8", Cap Screw; (C) 3/8" X 5/8", Cap Screw; (B: Engine Serial No.) (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (2 Used For 714, 714a; 6 Used For 716, 716a), Cap Screw; 3/8" X 5/8" (8630, 5460, 5820) (Cylinder Head), Cap Screw; (D) 3/8" X 5/8", Cap Screw; 308"X5/8", Cap Screw; (A: ( -Xxxxxx) Esn 4650-32***14; 4850-32***45) (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8" (Use With Ar76766), Cap Screw; (A: For Switzerland Only) 3/8" X 5/8", Cap Screw; (B: W/ Right Hand Exit Door) 3/8" X 5/8", Cap Screw; (B: Engine Wiring Harness Al111609, With Fuel Preheater On R.H. Side) 3/8" X 5/8", Cap Screw; (B) 3/8"X5/8", Cap Screw; 3/8" X 5/8", (Dry Type Air Cleaner), Cap Screw; 3/8" X 5/8", Used With Stationary Air Screen, Cap Screw; 3/8" X 5/8", (Air Cleaner To Water Outlet Manifold) (Use With Re28156), Cap Screw; 3/8" X 5/8", (Sub R44302), Cap Screw; (A) 3/8" X 5/8", Cap Screw; 9.525 X 15.875 mm (3/8" X 5/8"), Cap Screw; 3/8" X 5/8", (A/C Factory Installed), Cap Screw; 3/8" X 5/8", (Sub For Mg88703), Cap Screw; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (1 Used Single Battery) (2 Used Dual Battery), Cap Screw; (A: Engine Wiring Harness Al81909, With Fuel Preheater On L.H. Side) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (Sub T56055), Cap Screw; 9.525 X 15.875 mm, Cap Screw; 3/8" X 5/8", Europe, Cap Screw; 3/8" X 5/8", (Use With R108622), Cap Screw; 3/8" X 5/8" (Use With 14h812), Cap Screw; 3/8" X 5/8" With Air Conditioning, Cap Screw; 3/8" X 5/8", (Sub For 12h304 And 19h2021, This Application), Cap Screw; 3/8" X 5/8", (Use With R121694), Cap Screw; (B) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (Air Cleaner To Water Outlet Manifold) (Use With Ar76766), Cap Screw; 3/8" X 5/8", With Stationary Air Screen, Cap Screw; 3/8" X 5/8", 5720 Model Only, Cap Screw; (A) (C) 3/8" X 5/8", (Sub For T16516), Cap Screw; 3/8" X 5/8", (Use With R57516), Cap Screw; 3/8" X 5/8", Used With Rotary Air Screen, Cap Screw; (C) 3/8"X5/8", Cap Screw; 3/8" X 5/8", North America, Cap Screw; 3/8" X 5/8", Cap Screw; (A) (B) (C) 3/8" X 5/8", Cap Screw; 3/8" X 5/8" (Sub T56055), Cap Screw; (A) 3/8"X5/8", Cap Screw; 3/8" X 5/8", (32 Used For 714, 714a; 38 Used For 716, 716a), Cap Screw; 3/8"X2-5/8", Cap Screw; 3/8" X 5/8", With Rotary Air Screen, Cap Screw; 3/8", Cap Screw; (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8" (Use With Re28156) | 1 |
| H3***37 | O-Ring; 23.470 X 2.616 mm (0.924" X 0.103"), O-Ring; (Kit Re36631), O-Ring, O-Ring; (Kit Re36629), O-Ring; (Ord E76851), O-Ring; 23.470 X 2.616 mm, O-Ring; 0.924" X 0.103", O-Ring; (Sub For P47908, This Application), O-Ring; Germany, O-Ring; (Sub E76851), O-Ring; (A) 23.470 X 2.616 mm (0.924" X 0.103"), O-Ring; (Kit Ah63293), O-Ring; (A) | 1 |
3-1/2" X 24" Hydraulic Cylinder (John Deere) (18'-1" Through 20'-11" Wing Fold) [C11]
John Deere : 640 - Disk : 3-1/2" X 24" Hydraulic Cylinder (John Deere) (18'-1" Through 20'-11" Wing Fold) [C11]
| 14***88 | Nut; (A) 9/16", 14.9-24, 16.9-24, Nut; 9/16, Nut; (A) 14.9-24 16.9-24 9/16", Nut; 9/16" (Sub For 42***31), Nut; (A: Also Includes Sn:) 9/16", Nut; 9/16" (Use With R141058 Or R201752), Nut; (A) 9/16", Nut; 9/16", (Sub For T21487), Nut; (A) 16.9-24, 9/16", Nut; (A) 14.9-24 16.9-24, Nut, Nut; 9/16", Nut; 9//6", Nut; 9/16" 9/16", Nut; (A) 16.9-24, 14.9-24, Nut; 9/16" (Use With R141058 Or R201742), Nut; 14.275 mm (9/16") | 4 |
| A4***62 | Seal, Seal; (Kit Re37166), Kit; Bolt Kit - Mounting, Includes: Ref. 34 - 36, Kit; Package - Mounting Bolts, Includes: Ref. 34 - 36, Kit; Bolt, Kit; Package - Mounting Bolts | 1 |
| BT***5A | Nut; 28.575 mm (1-1/8"), Nut, Nut; 1-1/8", Nut; 28.575 mm (1-1/8") (Sub H29619), Nut; 28.575 mm | 1 |
3-3/4" X 8" Hydraulic Cylinder (Eaton "Wyr-Loc") (580 Series Cylinder) (20'-11" Depth Control) (Serial Number 325- ) [C08]
John Deere : 640 - Disk : 3-3/4" X 8" Hydraulic Cylinder (Eaton "Wyr-Loc") (580 Series Cylinder) (20'-11" Depth Control) (Serial Number 325- ) [C08]
| A4***66 | End; (B: Items Included In Ae42001), End; Rear, End, End; (Use With An240670), End; (B) | 1 |
| AN***99 | Hydraulic Cylinder; 3-3/4" X 8" (18'9") For Narrow Main Frame Sub Ah206888 For All Others Sub Ah176598, Hydraulic Cylinder; 3-3/4" X 8" (18'9") For Narrow Main Frame Sub Ah206888 All Others Sub Ah176598, Hydraulic Cylinder, Hydraulic Cylinder; 3-3/4" X 8" (24'9") (Sub Ah176598), Hydraulic Cylinder; 3-3/4" X 8" (18'9") (Sub Ah176598), Hydraulic Cylinder; 3-3/4" X 8" (24'9") For Narrow Main Frame Sub Ah206888 For All Others Sub Ah176598, Hydraulic Cylinder; 3-3/4" X 8" (21'9") (Sub Ah176598), Hydraulic Cylinder; (Sub Ah206888 Or Ah176598), Hydraulic Cylinder; (B: 33'9" And 38'3") 3-3/4" X 8" (Sub Ah176598), Hydraulic Cylinder; 3-3/4 X 8", Hydraulic Cylinder; 3-3/4" X 8" (21'9") For Narrow Main Frame Sub Ah206888 For All Others Sub Ah176598 | 1 |
| AN***36 | Seal Kit; (Use With An240670 ) (Sub Ah176574), Seal Kit, Seal Kit; (For An260199), Seal Kit; (Use With An240670), Seal Kit; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines) (Use With An240670 ) (Sub Ah176574), Seal Kit; (A: 29 Ft And 36 Ft Machines) (Use With An240670 ) (Sub Ah176574) | 1 |
3-3/4" X 8" Rephasing Hydraulic Cylinder (Cessna "Wyr-Loc") (20'-11" Depth Control) (Serial Number -324) [C07]
John Deere : 640 - Disk : 3-3/4" X 8" Rephasing Hydraulic Cylinder (Cessna "Wyr-Loc") (20'-11" Depth Control) (Serial Number -324) [C07]
| A4***66 | End; (B: Items Included In Ae42001), End; Rear, End, End; (Use With An240670), End; (B) | 1 |
| A4***67 | Rod | 1 |
| A4***32 | Hydraulic. Cylinder Rod G, Hydraulic. Cylinder Rod G; (Sub Complete Cylinder) | 1 |
4" X 8" Hydraulic Cylinder (Eaton "Wyr-Loc") (580 Series Cylinder) (18'-1" Through 20'-11" Depth Control) (Serial Number 325- ) [C10]
John Deere : 640 - Disk : 4" X 8" Hydraulic Cylinder (Eaton "Wyr-Loc") (580 Series Cylinder) (18'-1" Through 20'-11" Depth Control) (Serial Number 325- ) [C10]
| AH***76 | Seal Kit; (B: 41 Ft, 45 Ft, 53 Ft And 61 Ft Machines), Seal Kit; (Use With An240671) (Sub For An260237), Seal Kit; (Sub For An260237), Seal Kit; (Sub For An260237) (F), Seal Kit; (Sub For An260237) (E), Seal Kit; (Use With An240671 ) (Sub For An260237), Seal Kit, Seal Kit; (A: 29 Ft And 36 Ft Machines) | 1 |
| AN***01 | Hydraulic Cylinder, Hydraulic Cylinder; (Sub Ah206903) | 1 |
| N2***70 | End; (E), End, End; (F) | 1 |
4" X 8" Rephasing Hydraulic Cylinder (Cessna "Wyr-Loc") (18'-1" Through 20'-11" Depth Control) (Serial Number -324) [C09]
John Deere : 640 - Disk : 4" X 8" Rephasing Hydraulic Cylinder (Cessna "Wyr-Loc") (18'-1" Through 20'-11" Depth Control) (Serial Number -324) [C09]
| A4***09 | Rod, Plate Base | 1 |
| A4***10 | Hydraulic. Cylinder Rod G, Hydraulic. Cylinder Rod G; (Order Complete Cylinder), Hydraulic. Cylinder Rod G; (Sub Complete Cylinder), Sensor; Assembly, With Lead | 1 |
| A4***28 | Hydraulic Cylinder C, Hydraulic Cylinder C; (Sub Complete Cylinder) | 1 |
Combination Scrapers (Serial Number -580) [B09]
John Deere : 640 - Disk : Combination Scrapers (Serial Number -580) [B09]
| 19***20 | Cap Screw; 1/2" X 3-1/4", (Sub For Gf25165), Cap Screw; (E) (F) 1/2" X 3-1/4", Cap Screw; (F) 1/2" X 3-1/4", Cap Screw; (A) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" Use With Sae 4 Flywheel Hsg, Cap Screw; (D) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; 1/2"X3-1/4" (For L29021), Cap Screw; (B) (C) 1/2" X 3-1/4", Cap Screw; (Amrked R77714), Cap Screw; 1/2" X 3-1/4", (Sub For 19h1945), Cap Screw; (A) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With Sae 4 Flywheel Housing), Cap Screw; (C) 1/2" X 3-1/4", Cap Screw; (Marked R77714), Cap Screw; 12.700 X 82.550 mm, Cap Screw; (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4", (Use With H110290 Or H119210), Cap Screw; 1/2" X 3-1/4", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/4" (On Wing) (Hs, Sae 8), Cap Screw; 1/2" X 3-1/4" ((Hs, Sae 8), Cap Screw; 1/2"X3-1/4", Cap Screw; (B) 1/2" X 3-1/4", Cap Screw; (A) 1/2" X 3-1/4", Cap Screw; (E) 1/2" X 3-1/4", Cap Screw; (C) (D) 1/2" X 3-1/4", Cap Screw, Cap Screw; 1/2" X 3-1/4", (With Single Spacer), Cap Screw; 1/2"X3-1/4" |, Cap Screw; 1/2" X 3-1/4" (Use With 12h301 And 14h1040), Cap Screw; 1/2" X 3-1/4" Hs, Sae 8, Cap Screw; 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D) (B) 1/2" X 3-1/4", Cap Screw; (B) (D) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (For Drawn Flexible Main Frame And Wing), Cap Screw; (N: 10 Foot Main Frame Model) 1/2" X 3-1/4" (Hs, Sae 8), Cap Screw; (D), Cap Screw; 1/2" X 3-1/4", For 790, Cap Screw; (E) (B) 1/2" X 3-1/4", Cap Screw; 1/2" X 3-1/4" (Use With H110290 Or H119210) | 1 |
| 24***25 | Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00***00-), 370 (00***00-) And 390 (00***00-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-00***82), 370 (-00***93) And 390 (-00***80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334) | 1 |
| A3***42 | Spring Pin; (C), Spring Pin; 7.925 X 31.750 mm (5/16" X 1-1/4"), Spring Pin; (B), Spring Pin; (A) 7.925 X 31.750 mm (5/16" X 1-1/4"), Spring Pin; 5/16" X 1-1/4", Spring Pin; (C) 7.925 X 31.750 mm (5/16" X 1-1/4"), Rod; - Handle Lever To Cross Shaft, Spring Pin; (E), Spring Pin; (1 Used Per Arm), Rod; - Intermediate, Spring Pin; (B) 7.925 X 31.750 mm (5/16" X 1-1/4"), Spring Pin, Spring Pin; (A), Spring Pin; (D), Rod; - Hand Lever To Cross Shaft, Rod | 1 |
Combination Scrapers (Serial Number 581- ) [B11]
John Deere : 640 - Disk : Combination Scrapers (Serial Number 581- ) [B11]
| 19***20 | Cap Screw; 1/2" X 3", 730 Tractor, Cap Screw; (E) 1/2" X 3", Cap Screw; 1/2"X3", Cap Screw; 1/2"X76, Cap Screw; 1/2" X 3" (Sub For (2) 19h1984), Cap Screw; 1/2" X 3", (With Gang Press Reinforcement), Cap Screw; 1/2" X 3", (For 2" Frame Member), Cap Screw; (B) (D) 1/2" X 3", Cap Screw; (B) 1/2" X 3", Cap Screw; 1/2" X 3" (R.H. Side), Cap Screw; (D) 1/2" X 3", Cap Screw; 1/2"X3" (For T21677), Cap Screw; 1/2" X 3", (Use With R74197), Cap Screw; 1/3"X3", Cap Screw; 1/2"X 3", Cap Screw; 1/2" X 3", Unf, Cap Screw; 1/2" X 3", (Roll-Gard), Cap Screw; 1/2"X3" (T21677), Cap Screw; 1/2" X 3", Cap Screw; 1/2" X 3" Rh, Cap Screw; 1/2" X 3" 12'9" Through 24'9", Cap Screw, Cap Screw; 1/2"X3" (Sub For 19m7189), Cap Screw; 1/2" X 3" B+, Cap Screw; (C) 1/2" X 3", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3" (On Main Frame), Cap Screw; 1/2" X 3" R.H., Cap Screw; 1/2" X 3" (Sub For 19h1984), Cap Screw; 1/2" X 3", (For 2" Frame), Cap Screw; 1/2" X 3", (Rear Hinge), Cap Screw; 1/2x3", Cap Screw; 1/2" X 3" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3" (Use With 12h301 And 14h1040), Cap Screw; (A) 1/2" X 3", Cap Screw; 1/2" X 3", (Use With At66369), Cap Screw; 1/2" X 3", (Use With Roll-Gard), Cap Screw; 1/2" X 3", Cap Screw; 1/2"X76", Cap Screw; (B) (C) 1/2" X 3", Cap Screw; 1/2" X 3" (Use With 12h301), Cap Screw; (A) (B) 1/2"X3", Cap Screw; 1/2" X 3" (For T21677), Cap Screw; 1/2" X 3", (With Single Spacer) | 1 |
| 24***25 | Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00***00-), 370 (00***00-) And 390 (00***00-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-00***82), 370 (-00***93) And 390 (-00***80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334) | 1 |
| A3***42 | Spring Pin; (C), Spring Pin; 7.925 X 31.750 mm (5/16" X 1-1/4"), Spring Pin; (B), Spring Pin; (A) 7.925 X 31.750 mm (5/16" X 1-1/4"), Spring Pin; 5/16" X 1-1/4", Spring Pin; (C) 7.925 X 31.750 mm (5/16" X 1-1/4"), Rod; - Handle Lever To Cross Shaft, Spring Pin; (E), Spring Pin; (1 Used Per Arm), Rod; - Intermediate, Spring Pin; (B) 7.925 X 31.750 mm (5/16" X 1-1/4"), Spring Pin, Spring Pin; (A), Spring Pin; (D), Rod; - Hand Lever To Cross Shaft, Rod | 1 |
Cylinder Rod Ends [C12]
John Deere : 640 - Disk : Cylinder Rod Ends [C12]
| 19***21 | Cap Screw; (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (20'-9" Through 32'-1"), Cap Screw; 3/8" X 5/8", (A/C Adapted To Pressurized Cab), Cap Screw; 3/8" X 5/8" (17'-1" And 18'-3"), Cap Screw, Cap Screw; 3/8"X5/8", Cap Screw; (C) 3/8" X 5/8", Cap Screw; (B: Engine Serial No.) (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (2 Used For 714, 714a; 6 Used For 716, 716a), Cap Screw; 3/8" X 5/8" (8630, 5460, 5820) (Cylinder Head), Cap Screw; (D) 3/8" X 5/8", Cap Screw; 308"X5/8", Cap Screw; (A: ( -Xxxxxx) Esn 4650-32***14; 4850-32***45) (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8" (Use With Ar76766), Cap Screw; (A: For Switzerland Only) 3/8" X 5/8", Cap Screw; (B: W/ Right Hand Exit Door) 3/8" X 5/8", Cap Screw; (B: Engine Wiring Harness Al111609, With Fuel Preheater On R.H. Side) 3/8" X 5/8", Cap Screw; (B) 3/8"X5/8", Cap Screw; 3/8" X 5/8", (Dry Type Air Cleaner), Cap Screw; 3/8" X 5/8", Used With Stationary Air Screen, Cap Screw; 3/8" X 5/8", (Air Cleaner To Water Outlet Manifold) (Use With Re28156), Cap Screw; 3/8" X 5/8", (Sub R44302), Cap Screw; (A) 3/8" X 5/8", Cap Screw; 9.525 X 15.875 mm (3/8" X 5/8"), Cap Screw; 3/8" X 5/8", (A/C Factory Installed), Cap Screw; 3/8" X 5/8", (Sub For Mg88703), Cap Screw; (A: Rear Exhaust - Low Profile - Dual Stage - Heavy Duty) (B: Front Exhaust - High Mount - Dual Stage - Heavy Duty (Opposite As Shown)) (C: Front Exhaust - Lo-Turbo - Dual Stage - Heavy Duty (Not As Shown)) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (1 Used Single Battery) (2 Used Dual Battery), Cap Screw; (A: Engine Wiring Harness Al81909, With Fuel Preheater On L.H. Side) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (Sub T56055), Cap Screw; 9.525 X 15.875 mm, Cap Screw; 3/8" X 5/8", Europe, Cap Screw; 3/8" X 5/8", (Use With R108622), Cap Screw; 3/8" X 5/8" (Use With 14h812), Cap Screw; 3/8" X 5/8" With Air Conditioning, Cap Screw; 3/8" X 5/8", (Sub For 12h304 And 19h2021, This Application), Cap Screw; 3/8" X 5/8", (Use With R121694), Cap Screw; (B) 3/8" X 5/8", Cap Screw; 3/8" X 5/8", (Air Cleaner To Water Outlet Manifold) (Use With Ar76766), Cap Screw; 3/8" X 5/8", With Stationary Air Screen, Cap Screw; 3/8" X 5/8", 5720 Model Only, Cap Screw; (A) (C) 3/8" X 5/8", (Sub For T16516), Cap Screw; 3/8" X 5/8", (Use With R57516), Cap Screw; 3/8" X 5/8", Used With Rotary Air Screen, Cap Screw; (C) 3/8"X5/8", Cap Screw; 3/8" X 5/8", North America, Cap Screw; 3/8" X 5/8", Cap Screw; (A) (B) (C) 3/8" X 5/8", Cap Screw; 3/8" X 5/8" (Sub T56055), Cap Screw; (A) 3/8"X5/8", Cap Screw; 3/8" X 5/8", (32 Used For 714, 714a; 38 Used For 716, 716a), Cap Screw; 3/8"X2-5/8", Cap Screw; 3/8" X 5/8", With Rotary Air Screen, Cap Screw; 3/8", Cap Screw; (C: Air Cleaner To Water Outlet Manifold) 3/8" X 5/8" (Use With Re28156) | 2 |
| 19***17 | Cap Screw; 7/8" X 6" (Hs, Sae 8), Cap Screw; 7/8" X 6" | 1 |
| 22***43 | Set Screw; 3/8" X 7/16", (Sub For R56544), Set Screw; 3/8" X 7/16", (20'-9" Through 32'-1"), Set Screw; 3/8" X 7/16", Set Screw; (Sub For R56544), Set Screw; 3/8" X 7/16" (Sub For R56544) | 1 |
Decals [D05]
John Deere : 640 - Disk : Decals [D05]
| A4***17 | Sign; Single Point Depth Depth Control Letters (A Through L), Sign; (A Through L), Sign; (A Thru L), Sign; Single Point Depth Control Letters (A Thru L), Sign, Sign; Single Point Depth Control Letters (A Through L), Sign; (A Thru L) Single Point Depth Control, Sign; (A Thru L) (Sub N162744), Sign; Single Point Depth Control; A Through L, Sign; Single Point Depth Control Lettering (A Through L), Sign; Single Point Depth Control Lettering (A Thru L), Sign; Single Point Depth Control (A Thru L), Sign; Single Point Depth Control Letters (A Thru L) Single Point Depth Control Letters (A Thru L), Sign; (A: English) | 1 |
| A5***38 | Gear, Bevel; Gear & Pinion Set - Transmission (Matched Set) (See Note) (1st Used Trans. Ser. No. 21***06), Sign; "Operating Instructions" Hydraulic Wing Control, Located On Front Mainframe Next To Valve., Sign; Hydraulic Wing Control Instructions (Inside Lh Main Frame), Sign; (B) Hydraulic Wing Control Instructions (Inside Lh Main Frame), Gear, Bevel; Pinion And Gear Set - Matched Set Without Identification Groove, Loader Models Only, Gear, Bevel; Pinion & Gear Set - Trans. Lh & Rh (Matched Set Of 1 Pinion Shaft And 1 Bevel Gear), Sign; Hydraulic Wing Control Instructions, Sign; (Sub N242518) Hydraulic Wing Control Instructions | 1 |
| AA***91 | Kit; "Model Designation Kit" Located On Right Side Main Frame. One On Outside Of Long Tube; Main Frame Left Side, One On Outside Of Long Tube And One On Rear Of Lower Cross Link, Kit; "Model Designation" One On Right Side Of Main Frame, And One On Left Side Of Main Frame., Kit; "Model Desgination" One On R.H. Side Of Main Frame And One On L.H. Side Of Main Frame., Kit; "Model Designation" Located On Outside Of Each Wing, Kit; "Model Designation" One On R.H. Side Of Main Frame, And One On L.H. Side Of Main Frame., Kit; "Model Designation" Centered On Right Side Of Truss Tube Between Front Standards, Kit; "Model Designation Kit" 75mm, Kit, Kit; "Model Designation" One On Each Side Of Main Frame, Kit; "Model Designation" Kit, Outside And Front Of Truss Tube, Kit; Model Number Repair, Kit; "Model Designation" (One On Right Side Of Main Frame, And One On Left Side Of Main Frame., Kit; Model Number Repair, (Sub An232259), Kit; Kit, Model Number Repair, Kit; "55" - Located On R.H. Mast Plate, Kit; "Model Designation" Centered On Left Side Rear Of Main Frame Tube | 1 |
Depth Control Hydraulics (13'-10" Through 19'-10") (Serial Number -451) [B17]
John Deere : 640 - Disk : Depth Control Hydraulics (13'-10" Through 19'-10") (Serial Number -451) [B17]
| 14***04 | Nut; 3/4" 19.050 mm 3/4 Unf-2b Zn, Nut; 19.050 mm (3/4") (Sub For Na3557), Nut, Nut; 3/4" (Sub 14h902, This Application And 11h237), Nut; 3/4" (Without Hydraulic Wing Control), Nut; 3/4", (Sub For Na3557), Nut; 3/4", For 12n, Nut; 3/4", For Independent Marker, Nut; 3/4", Unf, Jam, Nut; 3/4", Jam, Nut; 3/4", Automatic Marker, Nut; 3/4", Independent Marker, Nut; 3/4", Nut; 3/4" (B), Nut; 3/4", For Automatic Marker, Nut; (A) 3/4", Nut; (A: Without Hydraulic Wing Control) 3/4", Nut; 3/4", Unf, Nut; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 3/4", Nut; 3/4" 3/4 Unf-2b Zn, Nut; 3/4" 3/4", Nut; 3/4", Unf,Jam, Nut; (B: Note; (Tbh Illustrated) (Tbt) -71***05 (Tbh) -71***78) 3/4", Nut; 3/4", For 6w, 8n, 8w, Nut; 3/4", Jam. Unf., Nut; 3/4" Jam, Nut; (B) 3/4", Nut; Without Hydraulic Wing Control, Nut; (A: Note; (Tbt) 71***06- (Tbh) 71***79-) 3/4", Nut; (B) 3/4", Nut; 304", Nut; 3/4" Without Hydraulic Wing Control | 1 |
| A2***98 | Union Fitting, Union Fitting; (A: Without Hydraulic Wing Control), Union Fitting; (Sub For R35701) (Basket Extension), Union Fitting; Without Hydraulic Wing Control, Union Fitting; (Sub For R35701) Independent Marker, Union Fitting; (Sub R35701) For Independent Marker, Union Fitting; For Independent Marker, Union Fitting; (Sub For R52831), Union Fitting; For Automatic Marker, Union Fitting; (Sub For R35701) Independent Marker Only, Union Fitting; (Sub For R35701) Automatic Marker, Union Fitting; 3/4", Union Fitting; (A), Union Fitting; (Sub For R35701), Union Fitting; (B), Union Fitting; (Sub For R35701) (Independent Marker Only), Union Fitting; (Sub For R35701) For Automatic Marker | 1 |
| AE***28 | Elbow Fitting; (Sub Aa43396), Elbow Fitting; 90 Degrees, Elbow Fitting; 90 Degree 3/4" Female 0-Ring X 3/4" Male O-Ring, Elbow Fitting; 90°, Elbow Fitting; (A: Use With Filter Screen), Elbow Fitting; 90° (Use With Filter), Elbow Fitting; (Sub For Aw25268), Elbow Fitting; 90 Degree 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90-, Elbow Fitting, Elbow Fitting; (A), Elbow Fitting; 90° 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90 Degree, Elbow Fitting; 90º, Elbow Fitting; 90° (For Loaders Before Serial Number 3915) (For Loaders Before Serial Number 3915) 90°, Elbow Fitting; 90º (Sub For (1) Aw25268), Elbow Fitting; 90 | 2 |
Depth Control Hydraulics (13'-10" Through 19'-10") (Serial Number 452- ) [B19]
John Deere : 640 - Disk : Depth Control Hydraulics (13'-10" Through 19'-10") (Serial Number 452- ) [B19]
| 14***04 | Nut; 3/4" 19.050 mm 3/4 Unf-2b Zn, Nut; 19.050 mm (3/4") (Sub For Na3557), Nut, Nut; 3/4" (Sub 14h902, This Application And 11h237), Nut; 3/4" (Without Hydraulic Wing Control), Nut; 3/4", (Sub For Na3557), Nut; 3/4", For 12n, Nut; 3/4", For Independent Marker, Nut; 3/4", Unf, Jam, Nut; 3/4", Jam, Nut; 3/4", Automatic Marker, Nut; 3/4", Independent Marker, Nut; 3/4", Nut; 3/4" (B), Nut; 3/4", For Automatic Marker, Nut; (A) 3/4", Nut; (A: Without Hydraulic Wing Control) 3/4", Nut; 3/4", Unf, Nut; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 3/4", Nut; 3/4" 3/4 Unf-2b Zn, Nut; 3/4" 3/4", Nut; 3/4", Unf,Jam, Nut; (B: Note; (Tbh Illustrated) (Tbt) -71***05 (Tbh) -71***78) 3/4", Nut; 3/4", For 6w, 8n, 8w, Nut; 3/4", Jam. Unf., Nut; 3/4" Jam, Nut; (B) 3/4", Nut; Without Hydraulic Wing Control, Nut; (A: Note; (Tbt) 71***06- (Tbh) 71***79-) 3/4", Nut; (B) 3/4", Nut; 304", Nut; 3/4" Without Hydraulic Wing Control | 1 |
| A2***98 | Union Fitting, Union Fitting; (A: Without Hydraulic Wing Control), Union Fitting; (Sub For R35701) (Basket Extension), Union Fitting; Without Hydraulic Wing Control, Union Fitting; (Sub For R35701) Independent Marker, Union Fitting; (Sub R35701) For Independent Marker, Union Fitting; For Independent Marker, Union Fitting; (Sub For R52831), Union Fitting; For Automatic Marker, Union Fitting; (Sub For R35701) Independent Marker Only, Union Fitting; (Sub For R35701) Automatic Marker, Union Fitting; 3/4", Union Fitting; (A), Union Fitting; (Sub For R35701), Union Fitting; (B), Union Fitting; (Sub For R35701) (Independent Marker Only), Union Fitting; (Sub For R35701) For Automatic Marker | 1 |
| AA***09 | Pressure Relief Valv; (16'5"-22'2"), Pressure Relief Valv; (Includes O-Ring R26448), Pressure Relief Valv; (Includes O-Ringr26448), Pressure Relief Valv, Pressure Relief Valv; Thermal, Pressure Relief Valv; 2-1/2" X 8", Pressure Relief Valv; Thermal Relief, Pressure Relief Valv; (A), Pressure Relief Valv; Thermal, (Includes R26448), Pressure Relief Valv; (Includes R26448) Thermal, Pressure Relief Valv; With O-Ring (4000 Psi) | 1 |
Depth Control Hydraulics (20'-11") (Serial No. -451) [B21]
John Deere : 640 - Disk : Depth Control Hydraulics (20'-11") (Serial No. -451) [B21]
| 14***04 | Nut; 3/4" 19.050 mm 3/4 Unf-2b Zn, Nut; 19.050 mm (3/4") (Sub For Na3557), Nut, Nut; 3/4" (Sub 14h902, This Application And 11h237), Nut; 3/4" (Without Hydraulic Wing Control), Nut; 3/4", (Sub For Na3557), Nut; 3/4", For 12n, Nut; 3/4", For Independent Marker, Nut; 3/4", Unf, Jam, Nut; 3/4", Jam, Nut; 3/4", Automatic Marker, Nut; 3/4", Independent Marker, Nut; 3/4", Nut; 3/4" (B), Nut; 3/4", For Automatic Marker, Nut; (A) 3/4", Nut; (A: Without Hydraulic Wing Control) 3/4", Nut; 3/4", Unf, Nut; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 3/4", Nut; 3/4" 3/4 Unf-2b Zn, Nut; 3/4" 3/4", Nut; 3/4", Unf,Jam, Nut; (B: Note; (Tbh Illustrated) (Tbt) -71***05 (Tbh) -71***78) 3/4", Nut; 3/4", For 6w, 8n, 8w, Nut; 3/4", Jam. Unf., Nut; 3/4" Jam, Nut; (B) 3/4", Nut; Without Hydraulic Wing Control, Nut; (A: Note; (Tbt) 71***06- (Tbh) 71***79-) 3/4", Nut; (B) 3/4", Nut; 304", Nut; 3/4" Without Hydraulic Wing Control | 1 |
| A2***98 | Union Fitting, Union Fitting; (A: Without Hydraulic Wing Control), Union Fitting; (Sub For R35701) (Basket Extension), Union Fitting; Without Hydraulic Wing Control, Union Fitting; (Sub For R35701) Independent Marker, Union Fitting; (Sub R35701) For Independent Marker, Union Fitting; For Independent Marker, Union Fitting; (Sub For R52831), Union Fitting; For Automatic Marker, Union Fitting; (Sub For R35701) Independent Marker Only, Union Fitting; (Sub For R35701) Automatic Marker, Union Fitting; 3/4", Union Fitting; (A), Union Fitting; (Sub For R35701), Union Fitting; (B), Union Fitting; (Sub For R35701) (Independent Marker Only), Union Fitting; (Sub For R35701) For Automatic Marker | 1 |
| AE***28 | Elbow Fitting; (Sub Aa43396), Elbow Fitting; 90 Degrees, Elbow Fitting; 90 Degree 3/4" Female 0-Ring X 3/4" Male O-Ring, Elbow Fitting; 90°, Elbow Fitting; (A: Use With Filter Screen), Elbow Fitting; 90° (Use With Filter), Elbow Fitting; (Sub For Aw25268), Elbow Fitting; 90 Degree 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90-, Elbow Fitting, Elbow Fitting; (A), Elbow Fitting; 90° 3/4" Female O-Ring X 3/4" Male O-Ring, Elbow Fitting; 90 Degree, Elbow Fitting; 90º, Elbow Fitting; 90° (For Loaders Before Serial Number 3915) (For Loaders Before Serial Number 3915) 90°, Elbow Fitting; 90º (Sub For (1) Aw25268), Elbow Fitting; 90 | 2 |
Depth Control Hydraulics (20'-11") (Serial Number 452- ) [B23]
John Deere : 640 - Disk : Depth Control Hydraulics (20'-11") (Serial Number 452- ) [B23]
| 14***04 | Nut; 3/4" 19.050 mm 3/4 Unf-2b Zn, Nut; 19.050 mm (3/4") (Sub For Na3557), Nut, Nut; 3/4" (Sub 14h902, This Application And 11h237), Nut; 3/4" (Without Hydraulic Wing Control), Nut; 3/4", (Sub For Na3557), Nut; 3/4", For 12n, Nut; 3/4", For Independent Marker, Nut; 3/4", Unf, Jam, Nut; 3/4", Jam, Nut; 3/4", Automatic Marker, Nut; 3/4", Independent Marker, Nut; 3/4", Nut; 3/4" (B), Nut; 3/4", For Automatic Marker, Nut; (A) 3/4", Nut; (A: Without Hydraulic Wing Control) 3/4", Nut; 3/4", Unf, Nut; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 3/4", Nut; 3/4" 3/4 Unf-2b Zn, Nut; 3/4" 3/4", Nut; 3/4", Unf,Jam, Nut; (B: Note; (Tbh Illustrated) (Tbt) -71***05 (Tbh) -71***78) 3/4", Nut; 3/4", For 6w, 8n, 8w, Nut; 3/4", Jam. Unf., Nut; 3/4" Jam, Nut; (B) 3/4", Nut; Without Hydraulic Wing Control, Nut; (A: Note; (Tbt) 71***06- (Tbh) 71***79-) 3/4", Nut; (B) 3/4", Nut; 304", Nut; 3/4" Without Hydraulic Wing Control | 1 |
| A2***98 | Union Fitting, Union Fitting; (A: Without Hydraulic Wing Control), Union Fitting; (Sub For R35701) (Basket Extension), Union Fitting; Without Hydraulic Wing Control, Union Fitting; (Sub For R35701) Independent Marker, Union Fitting; (Sub R35701) For Independent Marker, Union Fitting; For Independent Marker, Union Fitting; (Sub For R52831), Union Fitting; For Automatic Marker, Union Fitting; (Sub For R35701) Independent Marker Only, Union Fitting; (Sub For R35701) Automatic Marker, Union Fitting; 3/4", Union Fitting; (A), Union Fitting; (Sub For R35701), Union Fitting; (B), Union Fitting; (Sub For R35701) (Independent Marker Only), Union Fitting; (Sub For R35701) For Automatic Marker | 1 |
| AA***09 | Pressure Relief Valv; (16'5"-22'2"), Pressure Relief Valv; (Includes O-Ring R26448), Pressure Relief Valv; (Includes O-Ringr26448), Pressure Relief Valv, Pressure Relief Valv; Thermal, Pressure Relief Valv; 2-1/2" X 8", Pressure Relief Valv; Thermal Relief, Pressure Relief Valv; (A), Pressure Relief Valv; Thermal, (Includes R26448), Pressure Relief Valv; (Includes R26448) Thermal, Pressure Relief Valv; With O-Ring (4000 Psi) | 1 |
Disk Blades [B15]
John Deere : 640 - Disk : Disk Blades [B15]
| A2***10 | Disk; (A) 563 X 4.5 mm (22" X .177") 10p Edge, (Solid Spherical Disk), Disk; (A) 568 X 6 mm (22.362" X 0.236"), No. 10p Edge, Disk; (A), Disk; (A) 558.8 X 6.5 mm (22" X .256") No. 10p Edge, Disk; (A) 563 X 6.5 mm (22" X .256") 10p Edge, (Solid Spherical Disk), Disk; 568 X 6 mm (22.362" X 0.236"), No. 10p Edge, Disk; 558 X 6.5 mm (22" X .256") 10p Edge (Solid Cone), Disk; (A) 558 X 6.5 mm (22" X .256") 10p Edge, Disk; (A) 563.626 X 6.502 mm (22.190" X 0.256"), No. 10p Edge, Disk; (A) 563.626 X 6.500 mm (22.190" X 0.256"), No. 10p Edge, Disk; (A: Solid Cone) 558 X 6.5mm (22" X 0.256"), Disk; (A: Solid Cone) 558 X 6.5 mm (22" X .256") 10p Edge | 1 |
| A3***87 | Disk; 569 X 6 mm (22.402" X 0.236"), No. 1p Edge, Disk; (A) 561 X 6.5 mm ( 22" X .256") 1p Edge, (Solid Disk Blade), Disk; 560 mm (22") 6 mm (.250) No. 1 Edge, Disk; (A) 569 X 6 mm (22.402" X 0.236"), No. 1p Edge, Disk; (A: All Sizes) (E: Solid Spherical Disks) 22' X .256", Disk; 561 X 6.5 mm (22" X .256") 1p Edge, (Solid Spherical Disk), Disk; (A) 561 X 6.5 mm (22" X .256") 1p Edge, (Solid Spherical Disk), Disk; 558 X 6.5 mm (22" X .256") 1p Edge, Disk; (C: Solid Spherical) 558 X 6.5 mm (22" X .256") 1p Edge, Disk; (A) 561.340 X 6.502 mm (22.100" X 0.256"), No. 1p Edge, Disk; 558 X 6.5 mm (22" X .256") 1p Edge (Solid Spherical), Disk; (A) 562 X 6.5 mm ( 22" X .25") 1p Edge, (Solid Disk Blade), Disk; (C) 558 X 6.5 mm (22" X .256") 1p Edge, Disk; (A: All Sizes) 22" X .256" (Outside Front Blade), Disk; (A: All Sizes) 22" X .256", Disk; 22” Solid | 1 |
| A3***56 | Disk; 450 X 4.0 mm (18" X .157") 10p Edge, (Solid Spherical Disk), Disk; (A) 457 X 3.7 mm (18" X .148") 1p Edge, Disk; 457.200 X 3.500 mm (18" X 0.138"), No. 1p Edge, Disk; (Solid Cone), Disk; 449 X 4.0 mm (18" X .157") 10p Edge, (Solid Spherical Disk), Disk; (A) 457.200 X 3.500 mm (18" X 0.138"), No. 1p Edge, Disk; 450 mm X 4 mm (18.00" X .157") No. 1 Edge, Disk; (A: Solid Cone) 457 X 3.7 mm (18" X .148") 1p Edge, Disk; 449.580 X 3.500 mm (17.700" X 0.138"), No. 1p Edge | 1 |
Finishing Blade [B16]
John Deere : 640 - Disk : Finishing Blade [B16]
| 03***99 | Bolt; 5/8" X 1-3/4", 4010 And 4020 Tractor, Bolt, Bolt; 5/8" X 1-3/4", Bolt; (A) 5/8" X 1-3/4", Bolt; (B) 5/8" X 1-3/4", Bolt; (C) 5/8" X 1-3/4" | 3 |
| A1***83 | Washer, Washer; 1.060" X 2" X 1/4", Washer; (Sub For Na1795 And Na3851), Washer; (Sub For H82588) | 1 |
| A3***48 | Disk; 457.2 X 4.5 mm (18" X .177") No Bevel Or No Edge, Disk; 457.2 X 4.5 mm (18" X .177") No Bevel Or No Edge, 3-Lobe, Disk; 450 X 3.500 mm (18" X 0.177"), Disk; 457.200 X 4.500mm (18" X 0.177"), Disk; 457.200 X 4.500mm (18" X 0.177") No Bevel Or No Grind, Disk; 450.000 X 4.500 mm (18" X 0.177") Edge-No Bevel And No Grind, Disk; 3-Lobe, 457.200 X 4.500mm (18" X 0.177") (No Bevel Or No Edge), Disk; 457.200 X 4.500mm (18" X 0.177"), No Bevel And No Edge, Disk; 450 mm X 4.5 mm (18.00" X .157") N0 Bevel Or No Grind, Disk; 449.5 X 4.5 mm (17.69" X .177") No Bevel Or No Edge, 3-Lobe, (Illustrated), Disk; 457.200 X 4,500mm (18" X 0.177") No Bevel Or No Grind, Disk; 457.200 X 4.500mm (18" X 0.138"),No Bevel And No Grind, Disk; 457.200 X 4.500mm (18" X 0.177") (N0 Bevel Or No Edge) | 1 |
Gang Frames (Main) (13'-10" Through 15'-3") [B02]
John Deere : 640 - Disk : Gang Frames (Main) (13'-10" Through 15'-3") [B02]
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 10 |
| 19***07 | Cap Screw; (A: Extension Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (With Drawbar Offset Down), Cap Screw; (A: Clutch Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; (C) 3/4" X 2-3/4", Cap Screw; Ar 3/4"X2-3/4", Cap Screw; (A) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Code 1403), Cap Screw; (B: 100 mm Axle) (C: 92 mm Axle With R54160) 3/4" X 2-3/4", Cap Screw; 3/4"X3", Cap Screw; 3/4" X 2-3/4", (Center), Cap Screw; (B) (C) 3/4" X 2-3/4", Cap Screw; (A) (B) 3/4" X 2-3/4", Rear Top, Cap Screw; (B) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Or), Cap Screw; 3/4" X 2-3/4", Cap Screw; 3/8"X2-3/4", Cap Screw; Ar, 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4" Rear Top, (17'-11" Through 26'-5"), Cap Screw; 3/4" X 2-3/4", (Rc, St And Ru), Cap Screw; (B: Torque Divider To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: Clutch Housing To Cylinder Block) 3/4" X 2-3/4", Cap Screw; (D) (E) 3/4" X 2-3/4", Cap Screw; 3/4"X2-3/4", Cap Screw; Ar,3/4"X2-3/4", Cap Screw; (A: Extension Housing To Torque Divider) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", Rear Top, Cap Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: 20.8-38 Tire 8 Pr Not Used In U.S. And Canada) 3/4" X 2-3/4" (24.5-32 Or 23.1-34) Tire, Cap Screw; 3/4" X 2-3/4", (Row-Crop And Standard), Cap Screw; 3/4" X 2-3/4", For 850, Cap Screw; (A: 10, 000 Lb.) 3/4" X 2-3/4" Rigid Hitch, Cap Screw; (C) (D) (E) 3/4" X 2-3/4" | 2 |
| 19***11 | Cap Screw; (C) (D) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/4" X 2-1/2" (Hs, Sae 8) Top Holes, Cap Screw; (B) (C) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) Quantity Varies With Wing Size, Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) Quantities Vary With Wing Size, Cap Screw; (B) 3/4" X 2-1/2" (4050, 4055, 4250, 4255, 4450, 4455 Tractors), Cap Screw; 3/4" X 2-1/2", (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2", Cap Screw; 3/4" X 2-1/2", Hs, Sae 8; For 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4030, 4230, And 4430 Tractors, Cap Screw; 3/4" X 2-1/2", Hs Sae 8, Plated, Cap Screw; 19.050 X 63.500 mm, Cap Screw; (F) 3/4" X 2-1/2" (12-1/2') Top, Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) (Rear Top), Cap Screw; (A) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/4" X 2-1/2", Hs, Sae 8, Cap Screw; 3/4" X 2-1/2" (Sub For 19h1782), Cap Screw; 3/4" X 2-1/2" (Quantities Vary With Wing Size), Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) (Quantities Vary With Wing Size), Cap Screw; 3/4" X 2-1/2" 3-1/2" X 13/32", Cap Screw; (B) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 0,75" X 2,5", Cap Screw; 3/4"X2-1/2" | 4 |
Gang Frames (Main) (18'-1" Through 20'-11") [B03]
John Deere : 640 - Disk : Gang Frames (Main) (18'-1" Through 20'-11") [B03]
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 10 |
| 19***07 | Cap Screw; (A: Extension Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (With Drawbar Offset Down), Cap Screw; (A: Clutch Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; (C) 3/4" X 2-3/4", Cap Screw; Ar 3/4"X2-3/4", Cap Screw; (A) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Code 1403), Cap Screw; (B: 100 mm Axle) (C: 92 mm Axle With R54160) 3/4" X 2-3/4", Cap Screw; 3/4"X3", Cap Screw; 3/4" X 2-3/4", (Center), Cap Screw; (B) (C) 3/4" X 2-3/4", Cap Screw; (A) (B) 3/4" X 2-3/4", Rear Top, Cap Screw; (B) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Or), Cap Screw; 3/4" X 2-3/4", Cap Screw; 3/8"X2-3/4", Cap Screw; Ar, 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4" Rear Top, (17'-11" Through 26'-5"), Cap Screw; 3/4" X 2-3/4", (Rc, St And Ru), Cap Screw; (B: Torque Divider To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: Clutch Housing To Cylinder Block) 3/4" X 2-3/4", Cap Screw; (D) (E) 3/4" X 2-3/4", Cap Screw; 3/4"X2-3/4", Cap Screw; Ar,3/4"X2-3/4", Cap Screw; (A: Extension Housing To Torque Divider) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", Rear Top, Cap Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: 20.8-38 Tire 8 Pr Not Used In U.S. And Canada) 3/4" X 2-3/4" (24.5-32 Or 23.1-34) Tire, Cap Screw; 3/4" X 2-3/4", (Row-Crop And Standard), Cap Screw; 3/4" X 2-3/4", For 850, Cap Screw; (A: 10, 000 Lb.) 3/4" X 2-3/4" Rigid Hitch, Cap Screw; (C) (D) (E) 3/4" X 2-3/4" | 2 |
| 19***26 | Cap Screw; 3/8" X 2-1/4" (Round Shaft), Cap Screw; 3/8" X 2-1/4", (6211), Cap Screw; 3/8" X 2-1/4", For 5 Section, Cap Screw; 3/8" X 2-1/4", (Ea-D, De-01), Cap Screw; 3/8" X 2-1/4", (120 Used L.H.) (120 Used R.H.), Cap Screw; 3/8" X 2-1/4", (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8"X2-1/4", For 3179dl004, Cap Screw; 3/8" X 2-1/4" Low, Cap Screw; 3/8" X 2-1/4", (Ha-G, Ha-L, Hb-G, Hb-L, Hc-G), Cap Screw; (A) Roosa Master Dp,3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.9 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4, Cap Screw; (D) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" (Sub For 19h1164), Cap Screw; 3/8"X2-1/4", For 3179dl001, Cap Screw; 3/8" X 2-1/4", (Na-6, Gn-01), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar) (4.8 M (16-Ft.), 24 Used Per Tooth Bar), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Use With Cover Marked R52880 0r Re27895), Cap Screw; 3/8"X2-1/4", For 3179dl016, Cap Screw; 3/8" X 2-1/4", For 7 Section, Cap Screw; 3/8" X 2-1/4", (Gh-01), Cap Screw; (A: ( -Xxxxxx) 4250-00***71; 4450-01***05) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (4219 Dn-02), Cap Screw; 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", W/ 24m7106, Cap Screw; 3/8" X 2-1/4", Code 6201, Cap Screw; 3/8"X2-1/4" (Sub For 19h255), Cap Screw; (A: Quad-Range Transmission) 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sae 8), Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (10 Used, 1217; 13 Used, 1219) Each Additional Tooth Bar, Cap Screw; 3/8" X 2-1/4", (Ha-G), Cap Screw; 3/8" X 2-1/4", (2514,9701), Cap Screw; 3/8" X 2-1/4", (Use With Single Selective Control), Cap Screw; 3/8" X 2-1/4" (Sae 8), Cap Screw; 3/8" X 2-1/4", (Code 6202), Cap Screw; (A: Pe3029dkv50/54 (240) & Pe3029tkv50 (250)) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4" (Qrt), Cap Screw; 3/8"X2-1/4", For 3179dl013, Cap Screw; 3/8" X 2-1/4", (Use With R50415), Cap Screw; 3/8" X 2-1/4", (Ea-6), Cap Screw; 3/8 X 2-1/4", Cap Screw; 3/8" X 2-1/4", (2514,9138), Cap Screw; 3/8" X 2-1/4", (Use With Re19944), Cap Screw; (A) (B) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", (Sub For 19h1164), Cap Screw; 3/8" X 2-1/4" (A), Cap Screw; 3/8" X 2-1/4", (Sub For 19h1819, This Application), Cap Screw; (B) 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4" (For Ar97712), Cap Screw; 3/8" X 2-1/4", (3.7 M (12-Ft.), 18 Used Per Tooth Bar) (4.3 M (14-Ft.), 21 Used Per Tooth Bar), Cap Screw; 3/8" X 2-1/4", (To Bolt Bracket To Cab), Cap Screw; (A) 3/8"X2-1/4" |, Cap Screw; 3/8" X 2-1/4", (9138), Cap Screw; (B) 3/8" X 2-1/4", Cap Screw; (A) 3/8" X 2-1/4", Cap Screw; (B: Power Shift Transmission) 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4" 3/8" X 2-1/4", Cap Screw; 3/8" X 2-1/4", Cap Screw; 9.525 X 57.150 mm (3/8" X 2-1/4"), Cap Screw; 3/8" X 2-1/4", (Na-D, Dn-01), Cap Screw; 3/8"X2"-1/4", Cap Screw; 3/8" X 2-1/4" (50 Per Package) (Sub For Mg88546), Cap Screw; 3/8" X 2-1/4", Hs, Sae 8, 3/8" X 2-3/8" (Code 2111), Cap Screw; 3/8" X 2-1/4" (Upper), Cap Screw; 3/8" X 2-1/4", (40 Used,1217;65 Used,1219), Cap Screw; 3/8" X 2-1/2" (Sub For 19h1733), Cap Screw; 3/8" X 2-1/4", (Upper), Cap Screw; 3/8" X 2-1/4", For 503b And 506b, Cap Screw; 3/8" X 2-1/4" (To Bolt Bracket To Cab), Cap Screw; 3/8" X 2-1/4" (Sub For H86656), Cap Screw; 3/8" X 2-1/4" L.H., Cap Screw; 3/8" X 2-1/4", (Rc, Ru, Rus), Cap Screw; 3/8" X 2-1/4" Front, Cap Screw; (A: ( -Xxxxxx)4755-01***03;4955-01***24) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Less Cab), Cap Screw; 3/8" X 2-1/4", (Ha-D, Hb-D), Cap Screw; 3/8" X 2-1/4" Sub For 19h1164, Cap Screw; 3/8" X 2-1/4", (18 Used Per Tooth Bar, 3.7 M (12-Ft.) (21 Used Per Tooth Bar, 4.3 M (14-Ft.), Cap Screw; 3/8" X 2-1/4" (Use With R50415), Cap Screw; (A) 3/8"X2-1/4", Cap Screw, Cap Screw; (D) 3/8" X 2-1/4", (17'-11" Through 26'-5"), Cap Screw; (For 24m7106), Cap Screw; 3/8" X 2-1/4" (Use With 12h304 And 14h812), Cap Screw; (A) 7.50-16 3/8"X2-1/4", Cap Screw; 3/8" X 2-1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Cap Screw; 3/8" X 2-1/4" (Hs, Sae 8), Cap Screw; 9.525 X 57.150 mm, Cap Screw; 3/8"X2-1/4" (W/ At19509), Cap Screw; 3/8" X 2-1/4" (Use With 14h812), Cap Screw; 3/8"X2-1/4" (For At19509), Cap Screw; 3/8" X 2-1/4" (Dn-03, Nb-D), Cap Screw; 3/8" X 2-1/4", For 6 Section, Cap Screw; 3/8" X 2-1/4", (9140), Cap Screw; 3/8" X 2-1/4", No. 19 Hitch, Cap Screw; 3/8" X 2-1/4", (Diesel), Cap Screw; (A) 3/8"X2-1/4" (Marked L41202), Cap Screw; 3/8" X 2-1/4", L.H., Cap Screw; 3/8" X 2-1/4", (2513,9140), Cap Screw; (A: ( -Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8" X 2-1/4", Cap Screw; 3/8"X2-1/2" | 1 |
Gang Frames (Wing) (18'-1" Through 20'-11") [B04]
John Deere : 640 - Disk : Gang Frames (Wing) (18'-1" Through 20'-11") [B04]
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 0 |
| 19***11 | Cap Screw; (C) (D) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/4" X 2-1/2" (Hs, Sae 8) Top Holes, Cap Screw; (B) (C) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) Quantity Varies With Wing Size, Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) Quantities Vary With Wing Size, Cap Screw; (B) 3/4" X 2-1/2" (4050, 4055, 4250, 4255, 4450, 4455 Tractors), Cap Screw; 3/4" X 2-1/2", (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2", Cap Screw; 3/4" X 2-1/2", Hs, Sae 8; For 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4030, 4230, And 4430 Tractors, Cap Screw; 3/4" X 2-1/2", Hs Sae 8, Plated, Cap Screw; 19.050 X 63.500 mm, Cap Screw; (F) 3/4" X 2-1/2" (12-1/2') Top, Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) (Rear Top), Cap Screw; (A) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/4" X 2-1/2", Hs, Sae 8, Cap Screw; 3/4" X 2-1/2" (Sub For 19h1782), Cap Screw; 3/4" X 2-1/2" (Quantities Vary With Wing Size), Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) (Quantities Vary With Wing Size), Cap Screw; 3/4" X 2-1/2" 3-1/2" X 13/32", Cap Screw; (B) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 0,75" X 2,5", Cap Screw; 3/4"X2-1/2" | 0 |
| AN***75 | Structural Tubing; (F) Lh (18'-1" And 19'-10") | 1 |
Gang Nut Wrenches [D01]
John Deere : 640 - Disk : Gang Nut Wrenches [D01]
| A2***19 | Wrench; (Sq.), Wrench, Wrench; 61.9 mm (2-7/16"), Wrench; Sq., Wrench; Sq. Gang Nut, Wrench; Sq., For Gang Bolt, Wrench; Gang Nut, Sq., Wrench; Square Gang Nut, Wrench; Gang Nut, Square, Wrench; Square | 1 |
| A2***20 | Wrench; 1-1/4" Hex, Wrench; Hex. 32 mm (1-1/4"), Wrench; Hex. For 30 mm (1-1/4") Bolts, Gang Frame To Main Frame, Wrench; 32 mm (1-1/4") Hex., Wrench; 32mm (1-1/4"), Wrench; 30 mm (1-1/4"), Wrench; 30 mm (1-1/4") Gang Bolt, Wrench; Hex. 30 mm (1-1/4"), Wrench; 30 mm (1-1/4") Hex., Wrench; Hex., 30 mm (1-1/4"), Wrench; Hex., Wrench; Hex., For 30 mm (1-1/4") Gang Bolt, Wrench; Gang Nut, Hex. 32 mm (1-1/4"), Wrench, Wrench; Gang Nut, Hex, Wrench; 1-1/4" | 1 |
| BA***56 | Complete Goods/Ship.; Gang Nut Wrenches, Complete Goods/Ship.; (1) Square And (1) Hex Wrench | 1 |
Hitch [A08]
John Deere : 640 - Disk : Hitch [A08]
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 2 |
| 19***74 | Cap Screw; 3/8" X 7", Hs, Sae 8, Cap Screw; 3/8" X 7", (Hs, Sae 8), Cap Screw; 3/8" X 7" (Hs, Sae 8) (Rigid Hitch), Cap Screw; 3/8" X 7", Cap Screw; 3/8" X 7" (Hs, Sae 8), Cap Screw; 3/8" X 7, Hs, Sae 8, Cap Screw; 3/8" X 7" Hs, Sae 8, Cap Screw; 3/8" X 7" (Use With N187952) (Hs, Sae 8), Cap Screw; 3/8" X 7", Hs Sae8, Cap Screw; 3/8" X 7", Hs,Sae 8 | 2 |
| 24***59 | Washer; 1-1/32" X 2-1/4" X 1/4", (4 Nominal), Washer; 1-1/32" X 2-1/4" X 1/4", Washer; 1-1/32" X 2-1/4" X 1/4", (For 1" Threads), Washer; 26.187 X 57.150 X 6.350 mm (1-1/32" X 2-1/4" X 1/4"), Washer, Washer; 1-1/32" X 2-1/4" X 1/4" (2 Used With N188346) (1 Used With N188331), Washer; 1-1/32" X 2-1/4" X 1/4", (2 Used With N188346) (1 Used With N188331), Washer; (A: Hardware For Aa25964) 1-1/32" X 2-1/4" X 1/4" | 2 |
Hose Storage Support [A09]
John Deere : 640 - Disk : Hose Storage Support [A09]
| 14***26 | Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2" | 4 |
| 19***74 | Cap Screw; 3/8" X 7", Hs, Sae 8, Cap Screw; 3/8" X 7", (Hs, Sae 8), Cap Screw; 3/8" X 7" (Hs, Sae 8) (Rigid Hitch), Cap Screw; 3/8" X 7", Cap Screw; 3/8" X 7" (Hs, Sae 8), Cap Screw; 3/8" X 7, Hs, Sae 8, Cap Screw; 3/8" X 7" Hs, Sae 8, Cap Screw; 3/8" X 7" (Use With N187952) (Hs, Sae 8), Cap Screw; 3/8" X 7", Hs Sae8, Cap Screw; 3/8" X 7", Hs,Sae 8 | 2 |
| AN***87 | Kit, Kit; Hose Storage Bracket, Kit; (Sub For (2) A51173), Kit; Hydraulic Hose Storage Kit, Kit; Hydraulic Hose Storage Bracket, Kit; (Sub For A51173) | 1 |
Hydraulic Leveling Motor (Char-Lynn And Eaton) [C13]
John Deere : 640 - Disk : Hydraulic Leveling Motor (Char-Lynn And Eaton) [C13]
| AN***77 | Kit; (Sub For N170851), Kit; (Sub For T16318), Kit; Kit (For Ae32550), Kit; Kit, Incl Keys 3,5,6,11,14,19, Kit; Incl Keys 3,5,6,11,14,19, Kit; (For Ae32550), Kit; Repair (Char-Lynn 007), Kit; Includes Parts Marked(C), Kit; Also Includes Keys 2, 12 & 17, Kit; Eaton, Kit; (Includes Parts Marked (K)) (Use With An103855), Kit; (Includes Aw24883, W36283, A3917r, (2) R26906, (3) T70321 And (7) T124356), Kit; Includes Parts Marked (A), Kit; Seal (For Model 007), Kit, Kit; Repair (Char-Lynn 007) Includes Parts Marked (A), Kit; Seal, Kit Includes Parts Marked (A), Kit; Repair, Includes Parts Marked (A), Kit; Repair, Kit; (Use On 007 Series Motors) (Sub For Na5342), Kit; (Use With An193306), Kit; (Sub For N170847), Kit; (Includes Parts Marked (A), Kit; (A) (Sub For N170847), Kit; (Use On An103855) | 1 |
| AN***19 | Hydraulic Motor; Eaton - Note: Individual Repair Parts Available As Indicated. Seal Kit May Contain More Parts Than Necessary For This Application. (Sub For An191176 White Motor), Hydraulic Motor; With Drain, Hydraulic Motor, Hydraulic Motor; Note: No Individual Repair Parts Available Other Than At130068, Seal Kit, Which May Contain More Parts Than Necessary For This Application., Hydraulic Motor; (Char-Lynn) (Sub For An193306), Hydraulic Motor; Note: No Individual Repair Parts Available Other Than At130068 Seal Kit, Which May Contain More Parts Than Necessary For This Application., Hydraulic Motor; Eaton, Hydraulic Motor; (Sub For An193306) | 1 |
| AN***57 | Rotor | 1 |
Hydraulic Leveling [A13]
John Deere : 640 - Disk : Hydraulic Leveling [A13]
| 03***27 | Bolt; 3/4" X 2-1/2" | 2 |
| 11***38 | Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm | 1 |
| 14***76 | Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00***27;4760-00***50;4960-00***54) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-01***34; 4850-00***87) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-32***15; 4850-32***46) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-00***51; 4255-00***13; 4455-00***27) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-00***19; 8650-00***98) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-01***03;4955-01***24) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-00***87; 4255-00***81; 4455-01***58) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-00***31; 4250-00***42; 4450-02***66) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -32***23 (5310) -33***88) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -32***21 (5310) -33***91) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 32***24- (5310) 33***89-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-00***18; 8650-00***97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8 | 1 |
Hydraulic Wing Control Gauge (Serial Number - 451) [C17]
John Deere : 640 - Disk : Hydraulic Wing Control Gauge (Serial Number - 451) [C17]
| AN***53 | Union Fitting; (Includes (2) R26375, R27448 And R27449), Union Fitting, Union Fitting; Includes (1) R27448 Nut And (1) R27449 Washer, Union Fitting; (Use With N132040), Union Fitting; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors), Union Fitting; 148 (-04***00), 158 (-04***00), 168, Union Fitting; (For Use With Hydraulic Driven Pump), Union Fitting; (For Dual Cylinder), Union Fitting; 8r Wide, 12r Narrow, Optional For 8r Narrow, Union Fitting; (Sub For R63922, This Application) Includes R27448 Nut, Union Fitting; 12' Mf - 12' Inner - 6' Outer Floating, Union Fitting; (A), Union Fitting; (Includes (4) R27448), Union Fitting; (Includes R27448 Nut And Washer), Union Fitting; (B: 8000 & 9000 Series Tractors), Union Fitting; Hose Kit, 12' Mf - 12' Inner - 6' Outer Floating, Union Fitting; Optional, Union Fitting; 12' Mf - 12' Inner - 6' Hose Kit, Outer Floating, Union Fitting; (Inlcudes R27448 Nut And Washer), Union Fitting; (Includes(2) R26375o-Ring, R27448nut And R27449 Washer) | 1 |
| AN***98 | Adapter Fitting | 1 |
| AN***10 | Gauge | 1 |
Hydraulic Wing Control Gauge (Serial Number 452- ) [C18]
John Deere : 640 - Disk : Hydraulic Wing Control Gauge (Serial Number 452- ) [C18]
| AN***98 | Adapter Fitting | 1 |
| AN***10 | Gauge | 1 |
Hydraulic Wing Control Valve [C14]
John Deere : 640 - Disk : Hydraulic Wing Control Valve [C14]
| 19***49 | Cap Screw; 5/16" X 1-1/4", (Regulator And Shield To Support), Cap Screw; 5/16" X 1-1/4" 5/16"X1-1/4", Cap Screw; 5/16"X1-1/4", Cap Screw; 5/16" X 1-1/4" (Capscrew Style Shear Bolt), Cap Screw; 5/8"X1-1/4", Cap Screw; 5/16" X 1-1/4", Cap Screw; (Dh-01, Dh-02, Gh-01, Dh-03, Ha-D, Hc-D) 5/16" X 1-1/4", Cap Screw; 5/16" X 1-1/4", (Use With 12h303 And 14h785), Cap Screw; 5/16" X 1-1/4" (Gh-01, Gh-02, Ln-01, Hg-G, Nb-L), Cap Screw; 5/16" X 1-1/4", (Use With R27286), Cap Screw; (A: - Xxxxxx 457( - 31***00) 557( - 31***50) 457s( - 31***00)) 5/16" X 1-1/4" (1000 Rpm), Cap Screw; (A) 5/16" X 1-1/4", (1000 Rpm), Cap Screw; 7.925 X 31.750 mm (5/16" X 1-1/4"), Cap Screw; (Ou)5/16"X1-1/4", Cap Screw; X 5/16" X 1-1/4", Cap Screw; 5/16" X 1-1/4", (Af001 Only), Cap Screw; 5/16" X 1-1/4", Hs, Sae 8, Cap Screw; (A: - Xxxxxx 467( - 31***00) 567( - 31***50) 467s( - 31***00)) 5/16" X 1-1/4" (1000 Rpm), Cap Screw; 5/16" X 1-1/4", (Use With 14h785), Cap Screw; 5/16" X 1-1/4", Kit, Repair, Cap Screw; 5/16" X 1-1/4", (Sub For F2270r), Cap Screw; 5/16" X 1-1/4", (Use With Ar54556), Cap Screw; 7.925 X 31.750 mm, Cap Screw; 5/16" X 1-1/4", (Na-G, Gn-01), Cap Screw; 5/16" X 1-1/4", (Gn-01), Cap Screw; 5/16" X 1-1/4" (Dh-01, Hc-D), Cap Screw; (Access Cover To Timing Gear Cover), Cap Screw; 5/16" X 1-1/4" (Use With 14h785), Cap Screw; 5/16" X 1-1/4" (Use With 12h303), Cap Screw; 5/16" X 1-1/4" Sgb, Cap Screw; 5/16" X 1-1/4", (Sub Al63296), Cap Screw; 5/16" X 1-1/4", (Sub For 19h2915), Cap Screw; 5/16" X 1-1/4" (Use With Ar54556), Cap Screw, Cap Screw; 5/16" X 1-1/4", (Use With R76241), Cap Screw; (B) 5/16"X1-1/4", Cap Screw; 5/16" X 1-1/4", (Less Cab), Cap Screw; 5/16" X 1-1/4", (Sub For Mg87657 Or 19h2915), Cap Screw; 5/16" X 1-1/4", (Rc, Ru, Rus), Cap Screw; 5/16" X 1-1/4", Germany, Cap Screw; 5/16" X 1-1/4" (Use With 12h303 And 14h785), Cap Screw; (Ord Al55717, Al56026, Al55791, L55830, (2) 34m7118, (2) 19h1849), Cap Screw; 5/16" X 1-1/4" (Spring To Control Support), Cap Screw; (A: Sound-Gard Body) 5/16" X 1-1/4", Cap Screw; 5/16" X 1-1/4", Cap Screw; 5/16" X 1-1/4", (Use With Ar65812), Cap Screw; (C) (Sub For L39078, L58669 Appl), Cap Screw; (A) 5/16" X 1-1/4", Cap Screw; 5/16" X 1-1/4", (Dh-01, Dh-02, Gh-01, Dh-03), Cap Screw; 5/16" X 1-1/4" Sound-Gard Body, Cap Screw; 5/8"X1-1/4, Cap Screw; 5/16"X1-1/4" (Sub For 19h1137), Cap Screw; 5/16" X 1-1/4" (Sub For R26287, Appl), Cap Screw; 5/16"X1-1/8", Cap Screw; (C) 5/16" X 1-1/4", Cap Screw; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16" X 1-1/4" | 2 |
| 24***36 | Washer; 11/32" X 11/16" X 0.065", (2 Used With Adjustable Sieve; 4 Used, Rd. Hole Sieve), Washer; 11/32" X 11/16" X 0.065", (Use With E51951), Washer; 11/32" X 11/16" X 0.065" (A) (Rear), Washer; 11/32" X 11/16" X 0.065", (Adjustable Chaffers), Washer; 11/32" X 11/16" X 0.065" (Use With Straw Chopper), Washer; 11/32" X 11/16" X .060" (Sub For R20498), Washer; 11/32" X 11/16" X 0.065", (Rear Adapter Location), Washer; 11/32" X 11/16" X .060", Washer; 11/32" X 11/16" X 0.065", (Rear Adapter To Cover), Washer; 11/32" X 11/16" X 0.065", (Corn Head), Washer; 11/32" X 11/16" X 0.065", (With Harvestrak-Adj), Washer; (Sub For T69893), Washer; 0.060"X11/32"X11/16", Washer; 13/32"X11/16"X.060", Washer; 11/32"X11/16"X.060", Washer; 11/32" X 11/16" X 0.065" (Belt Drive), Washer; 11/32" X 11/16" X 0.065", (Used Only On R.H.), Washer; 11/32" X 5/8" X 1/16", Washer; (A) 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065", (Upper Angle), Washer; 11/32" X 11/16" X 0.065", (No Longer Required With R104859 Or R112269), Washer; 11/32" X 11/16" X 0.065" 5/16", Washer; 11/32" X 11/16" X 0.065", (Gear Case Shield To Gear Case), Washer; .060" X 11/32" X 1-1/2", Washer; 11/32" X 11/16" X 0.065" (Use With Ah119132), Washer; 0.344 X 0.688" X 0.06", Washer; 11/32" X 11/16" X 0.065" 60' Boom, Washer; 11/32" X 11/16" X 0.065", (Use With R39925), Washer; 11/32" X 11/16" X 0.065" (Also Order K40003) (Sub For R53668, This Application), Washer; 11/32" X 11/16" X 0.065", (Used With Rd. Hole Sieve), Washer; 11/32" X 11/16" X 0.065", (Use With Round Hole Sieve), Washer; 11/32" X 11/16" X 0.065" (Water Pump Inlet To Cover Screws), Washer; 11/32" X 11/16" X 0.065", (Less Harvestrak, With Harvestrak, And Adjustable Rear Axle), Washer; 11/32" X 11/16" X 0.065" (Use With 19h3552), Washer; 11/32" X 11/16" X 0.065", (Rear Adapter Cover), Washer; 11/32" X 11/16" X 0.065", (Use With 19h2020), Washer; 11/32" X 11/16" X 0.065", (Use With 19h3552), Washer; 11/32" X 11/16" X 0.065", (Sub For Mg87362), Washer; 11/32" X 11/16" X 0.065", (Af), Washer; (C) 0.060"X11/32"X11/16", Washer, Washer; 11/32" X 11/16" X 0.065", (Posi-Torq Drive), Washer; 11/32" X 11/16" X 0.065", (Nla), Washer; 11/32" X 11/16" X 0.065" (920, 922 Rice, 925 And 930), Washer; 5/16"X3/4"X.060", Washer; 0.344" X 0.688" X .06", Washer; (A: For 9650 Cts Combine (69***10- )) 11/32" X 11/16" X 0.065", Washer; .060" X 11/32" X 3/4", Washer; 11/32" X 11/16" X .060" (Sub For R20468), Washer; 8.738 X 17.475 X 1.651 mm, Washer; (A: Used With 19h1913) 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065" (Fixed Hole Sieve), Washer; 11/32" X 11/16" X 0.065", (Use With R41406), Washer; 11/32" X 11/16" X 0.065", (Less Harvestrak-Adj), Washer; (C) (D) 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065" (With Harvestrak), Washer; M10 X 90, (Sub For (2) Mg508084), Washer; 11/32" X 11/16" X 0.065", (Use With T21545), Washer; 3/4" X 11/32" X .060", Washer; 0.344"X0.688"X0.06", Washer; 11/32" X 11/16" X 0.065" (No Longer Required), Washer; 0.344" X .688" X .006", Washer; 11/32" X 11/16" X 0.065" (Sub For Mg87362), Washer; 11/32" X 11/16" X 0.065" (930 Flex Arg), Washer; 8.738 X 17.475 X 1.651 mm (11/32" X 11/16" X 0.065"), Washer; 11/32" X 11/16" X 0.065", (Less Harvestrak, With Harvestrak And Adjustable Rear Axle), Washer; 11/32" X 11/16" X 0.065" Rh, Washer; 11/32" X 11/16" X 0.065" (Less Harvestrak), Washer; (D: (Xxx- ) 8560-00***01;8760-00***01;8960-00***01) 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065", (Between Sheet Metal And Terminal), Washer; 8.738 X 17.475 X 1.651 mm, Washer; 11/32" X 11/16" X 0.065" (4 X 16), Washer; 11/32" X .060", Washer; 11/32" X 11/16" X 0.065", (Not Used With Re38759), Washer; 11/32" X 11/16" X 0.065" (Rear Adapter Cover), Washer; 11/32" X 11/16" X 0.065" (Flange Nut), Washer; 11/32x11/16", Washer; (B) 0.060"X11/32"X11/16", Washer; 11/32" X 11/16" X 0.065", Use With 4-Wheel Drive Tractors, Washer, Washer; .060" X 11/32" X 11/16", Washer; X 11/32" X 11/16" X .060", Washer; 11/32" X 3/4" X .060", Washer; 11/32" X 11/16" X 0.065", (Use With Ah119132), Washer; (C) 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065" 11/36" X 11/16" X 0.060", Washer; 11/32" X 11/16" X 0.065" (A), Washer; 5/16"X3/4"X.075", Washer; (Rear Adapter Cover), Washer; 8.738 X 17.475 X 1.651 mm (11/32" X 11/16" X 0.065") 60' Boom, Washer; (B: 60' Boom) 11/32" X 11/16" X 0.065", Washer; (A: For Engine (Cd6068hz001)) 11/32" X 11/16" X 0.065", Washer; X 11/32" X 11/16" X .060", Washer; 11/32" X 11/16" X 0.065", (Nlr), Washer; 11/32"X11/16"X0.060", Washer; 11/32" X 11/16" X 0.065" Rear, Washer; Ar, 11/32" X 11/16", Washer; 11/32" X 11/16" X 0.065" Swing Lock, Washer; 11/32" X 11/16" X 0.065" (Use With Round Hole Sieve), Washer; 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065" (Between Valve And Plate), Washer; 11/32" X 11/16" X 0.065" (Upper Angle), Washer; 11/32" X 11/16" X 0.065" (Sub For R104581 ) (Also Order 19h3300), Washer; 11/32" X 11/16" X 0.065" 11/32" X 11/16" X .060" (A), Washer; 11/32" X 11/16" X 0.065" (Nlr), Washer; 11/32" X 11/16" X 0.065", R.H., Washer; 11/32" X 11/16" X 0.065" .060 X 11/32 X 11/16 Zn, Washer; 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065", For Re61095, Washer; (A) (C) 11/32" X 11/16" X 0.065", Washer; (D) 11/32" X 11/16" X 0.065", Washer; (A) 11/32"X11/16"X0.065", Washer; 11/32"X5/16"X.060", Washer; 11/32" X 11/1116" X 0.065", Washer; 11/32" X 11/16" X 0.065" (Sub For T54868), Washer; 0.344" X 0.688" X 0.06", Washer; 11/32"X3/4"X.060", Washer; 11/32" X 11/16" X 0.065" 11/32" X 23/32" X 0.060", Washer; 11/32"X5/8"X.060", Washer; (Sub For R20498), Washer; 11/32" X 11/16" X 0.065", Use With 19h1913, Washer; X, Washer; 11/32" X 11/16" X 0.065" (918 Flex Euro, 920, 922 Rice, 925 And 930), Washer; 11/32" X 11/16" X 0.065" (Sub For 1143190342), Washer; 11/32" X 11/16" X 0.065" (2 Used, With Grain Tank Extension; 3 Used, Without Grain Tank Extension), Washer; 11/32" X 11/16" X 0.065" (918 Flex Euro And 930 Flex Arg), Washer; 11/32" X 11/16" X 0.065" (Less Harvestrak, With Harvestrak And Adjustable Rear Axle), Washer; 11/32" X 11/16" X 0,060", Washer; 11/32" X 11/16" X 0.065" (B), Washer; 11/32" X 11/16" X 0.065", (Sub For L1198t), Washer; 11/32" X 11/16" X 0.065", (Sub For Mg251395 And Mg87362), Washer; 11/32" X 11/16" X 0.065", (Insecticide Only), Washer; 11/32"X11/16"X.060" (Sub For R20498), Washer; 11/32" X 11/16", Ar, Washer; 11/32"X11/16", Washer; 8,73 X 17,47 X 1,65 mm, Washer; (B) 11/32" X 11/16" X 0.065", Washer; 8.738 X 17.475 X 1.651 mm (11/32" X 11/16" X 0.065"), Washer; (B) (D) 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065" (With Air Conditioner), Washer; 11/32" X 11/16" X 0.065", For R115235, Washer; 11/32" X 11/16" X 0.065" (Use With Rd. Hole Sieve), Washer; 11/32" X 11/16" X 0.065", Rear Adapter Cover, Washer; 11/32" X 5/16" X .060", Washer; (A: For 9650 Combine (69***07- ) Also Serial Nos. 69***94, 69***95, 69***01, 69***02 And 69***05.) 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065" 11/32" X 11/16" X 0.060", Washer; 11/32" X 11/16" X 0.065" (918 Flex, 920, 922 Rice, 925 And 930 Rice), Washer; 11/32" X 11/16" X 0.065" (A), (B), Washer; 11/32" X 11/16" X 0.065" (Sub Ah113908), Washer; 11/32" X 11/16" X 0.065", (No Longer Required), Washer; X 11/32" X 1" X .60", Washer; (A) 11/32" X 11/16" X .060", Washer; X 11/32" X 11/16" X .060", Washer; 11/32"X11/16"X0.065", Washer; 11/32" X 11/16" X 0.065", (Dh-03, Gh-01), Washer; (A: ( -Xxxxxx) 8560-00***00; 8760-00***00; 8960-00***00) 11/32" X 11/16" X 0.065", Washer; 11/32" X 11/16" X 0.065" (Use With Spacers), Washer; 11/32" X 11/16" X 0.065", (U/W Rd. Hole Sieve), Washer; 11/32" X 11/16" X 0.065" (Use With R78124), Washer; 11/32" X 11/16" X 0.065", (Use With Spacers), Washer; 11/32" X 11/16" X 0.065", (Posi-Torq), Washer; 11/32" X 11/16" X 0.065", Cowl To Control Support, Washer; 11/32" X 11/16" X 0.060" | 2 |
| A5***96 | Housing | 1 |
Jackstand [A10]
John Deere : 640 - Disk : Jackstand [A10]
| 24***25 | Washer; 17/32" X 1" X 0.134", Washer; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", Washer; (A: For 2.8 M (9'2") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, Washer; (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" R.H., Washer; 17/32"X14x.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer, Washer; 13.487 X 25.400 X 3.048 mm (17/32" X 1" X 0.120"), Washer; 17/32"X1"X.120", Washer; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Less Power Take-Off Or With 540 Rpm Power Take-Off), Washer; (A), Washer; X 17/32" X 1" X.120", Washer; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (00***00-), 370 (00***00-) And 390 (00***00-)) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Independent Power Take-Off), Washer; 17/32" X 1" X 0.120" (Sub For 24m7240), Washer; 17/32" X 1" X 0.120", (Sub For 24h1787), Washer; 13.487 X 25.400 X 3.048 mm, Washer; (K) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With N202131), Washer; (B) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X.120", Washer; 17/32" X 1" X 0.120" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Washer; 17/32" X 1" X 0.120", (Use With T46524), Washer; 17/32" X 1" X 0.120" (Use With Ap31334), Washer; 17/32" X 1" X 0.120", (1 Used Per Capscrew), Washer; (B) (C) (D) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120" Upper, (Sub For 24m7240), Washer; 1/2"X1"X.120", Washer; (A) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", For 6-Row Planters Only, Washer; (A) (B) (C) (D) 17/32" X 1" X 0.120", Washer; (C) (D) 17/32" X 1" X 0.120", Washer; (A: Serial No For 360 (-00***82), 370 (-00***93) And 390 (-00***80)) 17/32" X 1" X 0.120" (Sub For 24h1787), Washer; 17/32" X 1" X 0.120", (Or), Washer; 17/32"X1x.120", Washer; 17/32" X 1" X 0.120", (327, 336, 337, 346 And 347 Balers), Washer; 17/32" X 1" X 0.120", (1 Used Per Arm), Washer; (A) (B) (C) 17/32" X 1" X 0.120", Washer; 17/32x1", Washer; (A) 17/32"X1"X.120", Washer; (A: Contained In Ar94567) 17/32" X 1" X 0.120", Washer; (C) 17/32" X 1" X 0.120", Washer; (A: For John Deere Axles) 17/32" X 1" X 0.120", Washer; (A) (B) 17/32" X 1" X 0.120", Washer; (E) 17/32" X 1" X 0.120", Washer; 17/32"X1", Washer; (B) (C) 17/32" X 1" X 0.120", Washer; 17/32" X 1" X 0.120", (Use With Ap31334) | 1 |
| AA***92 | Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00***26; 7700-00***20; 7800-01***50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650 | 1 |
| AE***14 | Jack; (Sub For Ac15349 Or Aa20955), Jack, Jack; (Sub For Aa20955) | 1 |
Knockout Scraper [B06]
John Deere : 640 - Disk : Knockout Scraper [B06]
| 08***38 | Bolt; (C: 6 Weights) 5/8" X 9", Bolt; 5/8" X 9", (Hs, Sae 8) (For 7 X 7 Frame), Bolt; (B) 5/8" X 9", Bolt; 5/8" X 9" (Hs, Sae 8), Bolt; 5/8" X 9", Hs Sae8, Bolt; (B: Four Weights) 5/8" X 9" (Sub For 08h4260), Bolt; (A) 6, 5/8"X9", Bolt; (A) 10,5/8"X9", Bolt; (B: For Four Front Weights) 5/8" X 9" (Sub For 08h4260), Bolt; (B: Four Weights) 5/8" X 9" (Hs, Sae 8), Bolt; (A: Germany) 5/8" X 9" (Use With 6), Bolt; (B) 5/8" X 9" (Hs, Sae 8), Bolt; 5/8" X 9", (4 Quik-Tatch Weights), Bolt; (A) 6 5/8"X9", Bolt; 5/8" X 9", (Hs, Sae 8) (For 178 X 178 mm (7" X 7") Frame), Bolt; (A) 10 5/8"X9", Bolt; 5/8" X 9" Rear, Bolt; 5/8" X 9", (Use With 4 Quik-Tatch Weights), Bolt; 5/8" X 9" (7 X 7) (Hs, Sae 8), Bolt; (B: Number Of Weights) (C: Germany) 5/8" X 9" (Hs, Sae 8) (6), Bolt; (A) 10, 5/8"X9", Bolt; (D: 10 Weights) 5/8" X 9", Bolt; (B: Number Of Weights) 5/8" X 9" (10), Bolt; 5/8" X 9" (Use With 10), Bolt; 5/8" X 9", Bolt; (A) 6,5/8"X9", Bolt; 5/8" X 9" (Four Quik-Tatch Weights), Bolt; (B: Four Weights) 5/8" X 9", Bolt; 5/8" X 9" (Sub For 08h4260), Bolt; 5/8" X 9", Hs, Sae 8, Bolt; 5/8" X 9", Hs Sae 8, Bolt; (B: 10 Weights) 5/8" X 9", Bolt; 5/8" X 9" 5/8" X 9" For 20'9", Bolt; (B) 5/8" X 9" (Hs, Sae 8) (For 7 X 7 Frame), Bolt; 5/8" X 9", (Four Quik-Tatch Weights) | 2 |
| 19***99 | Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2" (Sae 8) (Sub For 19h1847), Cap Screw; (A) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (Less Cab), Cap Screw; 5/8" X 2-1/2", (Sae 8), Cap Screw; 5/8" X 2-1/2", (Code 1404), Cap Screw; 5/8" X 2-1/2", (Code 1403), Cap Screw; 5/8" X 2-1/2" Sae 8, Cap Screw; 5/8" X 2-1/2", Upper Right, (Sub For 19h3244), Cap Screw; 5/8"X2-1/2"Unc, Cap Screw; (E: Code 1402 Flywheel Housing Sae No. 2) 5/8" X 2-1/2" Code 1403, Cap Screw, Cap Screw; Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", (4 Used Without Step), Cap Screw; 5/8" X 2-1/2", (Sub 19h3244), Cap Screw; 5/8" X 2-1/2" (Hs, Sae 8), Cap Screw; 5/8" X 2-1/2", (Sub For 19h1387) (1405), Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244), Cap Screw; 5/8" X 2-1/2" Rh., Cap Screw; 5/8" X 2-1/2", (Sub For 19h3244, This Application), Cap Screw; 5/8" X 2-1/2" (A), Cap Screw; 5/8" X 2-1/2", Code 1407, Cap Screw; 5/8" X 2-1/2", Code 1406, Cap Screw; 5/8" X 2-1/2" (Sae 8), Cap Screw; 5/8"X2-1/2", Cap Screw; 5/8" X 2-1/2", Upper Right, Cap Screw; 5/8" X 2-1/2" Hs, Sae 8, 5/8" X 2-1/2", Cap Screw; (A) (B) 5/8" X 2-1/2", Cap Screw; 5/8" X 2-1/2", Low | 2 |
| 24***73 | Washer; 21/32" X 1-9/16" X 0.180", (Sub For E14145), Washer, Washer; 21/32" X 1-9/16" X 0.180", Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 21/32" X 1-9/16" X 0.180", Washer; X 21/32" X 1-9/16" X .180", Washer; .180" X 21/32" X 1-9/16", Washer; 21/32" X 1-9/16" X 0.180", (Use With Ae36664 And Ae41988), Washer; 16,6 X 39,6 X 4,5 mm, Washer; .134x1/16"X1-1/2", Washer; Lh, Washer; (A) 21/32" X 1-9/16" X 0.180", Washer; 21/32"X1-9/16"X0.18", Washer; 21/32" X 1-9/16" X 0.180", *, (Sub For H24124), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 21/32" X 1-9/16" X 0.180", Washer; 21/32" X 1-9/16" X .180", Washer; 21/32" X 1-9/16" X 0.180", (Sub E14145), Washer; 21/32" X 1-9/16" X 0.180" (Used On Rear Bolts), Washer; Rh, Washer; 21/32" X 1-9/16" X 0.180", *, Washer; 16,66 X 39,67 X 4,52 mm, Washer; (A: For 9650 (69***01- ) & 9750 (69***01- )) 21/32" X 1-9/16" X 0.180", Washer; 21/32"X1-9/16"X.180", Washer; 16.662 X 39.675 X 4.572 mm (21/32" X 1-9/16" X 0.180"), Washer; 16.662 X 39.675 X 4.572 mm, Washer; 21/32" X 1-9/16" X 0,180", Washer; (A) 16,66 X 39,67 X 4,52 mm, Washer; .180"X21/32"X19/16", Washer; 21/32" X 1-9/16" X 0.180", (7 Nominal), Washer; .180"X21/32"X1-9/16", Washer; 21/32" X 1-9/16" X 0.180", (6 Nominal), Washer; 16,66 X 39,67 X 4,57 mm, Washer; 21/32" X 1-9/16" X 0.180" Lh, Rh | 2 |
Main Frame [A11]
John Deere : 640 - Disk : Main Frame [A11]
| 08***71 | Cap Screw; 3/8" X 8-1/2" (Reg), Cap Screw; 3/8" X 8-1/2" (Hs, Sae 8), Cap Screw; 3/8" X 8-1/2", Cap Screw; 3/8" X 8-1/2", (Reg), Cap Screw; 3/8" X 8-1/2" Short Tooth Pickup, Cap Screw; (A) 3/8" X 8-1/2", Cap Screw; 3/8" X 8-1/2" L.H. | 4 |
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 14 |
| 19***07 | Cap Screw; (A: Extension Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (With Drawbar Offset Down), Cap Screw; (A: Clutch Housing To Transmission Case) 3/4" X 2-3/4", Cap Screw; (C) 3/4" X 2-3/4", Cap Screw; Ar 3/4"X2-3/4", Cap Screw; (A) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Code 1403), Cap Screw; (B: 100 mm Axle) (C: 92 mm Axle With R54160) 3/4" X 2-3/4", Cap Screw; 3/4"X3", Cap Screw; 3/4" X 2-3/4", (Center), Cap Screw; (B) (C) 3/4" X 2-3/4", Cap Screw; (A) (B) 3/4" X 2-3/4", Rear Top, Cap Screw; (B) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", (Or), Cap Screw; 3/4" X 2-3/4", Cap Screw; 3/8"X2-3/4", Cap Screw; Ar, 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4" Rear Top, (17'-11" Through 26'-5"), Cap Screw; 3/4" X 2-3/4", (Rc, St And Ru), Cap Screw; (B: Torque Divider To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: Clutch Housing To Cylinder Block) 3/4" X 2-3/4", Cap Screw; (D) (E) 3/4" X 2-3/4", Cap Screw; 3/4"X2-3/4", Cap Screw; Ar,3/4"X2-3/4", Cap Screw; (A: Extension Housing To Torque Divider) 3/4" X 2-3/4", Cap Screw; 3/4" X 2-3/4", Rear Top, Cap Screw; (B: Transmission Case To Extension Housing) 3/4" X 2-3/4", Cap Screw; (A: 20.8-38 Tire 8 Pr Not Used In U.S. And Canada) 3/4" X 2-3/4" (24.5-32 Or 23.1-34) Tire, Cap Screw; 3/4" X 2-3/4", (Row-Crop And Standard), Cap Screw; 3/4" X 2-3/4", For 850, Cap Screw; (A: 10, 000 Lb.) 3/4" X 2-3/4" Rigid Hitch, Cap Screw; (C) (D) (E) 3/4" X 2-3/4" | 2 |
Manual Leveling Rod And Pivot [A12]
John Deere : 640 - Disk : Manual Leveling Rod And Pivot [A12]
| 03***27 | Bolt; 3/4" X 2-1/2" | 2 |
| 11***38 | Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm | 1 |
| 14***72 | Nut; 1", Slotted, Nut; 1" Unc Slotted, Nut; 1" Slotted, Nut; 1", Nut; 1" Unc, Slotted, Nut; 1", (Sub For Mg281042), Nut; 1" 1" Slotted, Nut; (A) 1" Slotted | 1 |
Middlebreaker [B13]
John Deere : 640 - Disk : Middlebreaker [B13]
| 08***26 | Cap Screw; 1/2" X 7-1/2", With 3-1/2" Of Thread, Cap Screw; 1/2" X 7-1/2", With 3 1/2" Threads, Cap Screw; 1/2" X 7-1/2", With 3 1/2 Threads, Cap Screw; 1/2" X 7-1/2" | 1 |
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 2 |
| 14***76 | Nut; 1" (B), Nut; 1" Jam, Nut; 1", Jam, Nut; 1" Hex Jam, Nut; 1", Nut; (A) 1", Nut; 1", Hex Jam, Nut; 1" (A) (B) (C), Nut; (Use With An204476), Nut; 1", (Sub For N209287), Nut; 25.400 mm (1") Hex Jam, Nut, Nut; (B: Quantities Shown Are For One Unit. Two Units Used Per Machine, Except Those Identified With An (A).) 1", Nut; 1" (Sub For N209287) | 1 |
Safety Chain [A07]
John Deere : 640 - Disk : Safety Chain [A07]
| 08***22 | Cap Screw; (B) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (Sub For Mg281036), Cap Screw; 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (12'-2" Through 15'-0") (10,000 Lb Chain), Cap Screw; 3/4"X7-1/2", Cap Screw; 3/4" X 7-1/2", (12'2" Through 15'0") (For 10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (For 12-Row), Cap Screw; 3/4" X 7-1/2", 5 X 7 Frame, Cap Screw; 3/4" X 7-1/2", (For 12 Row), Cap Screw; (C) 3/4" X 7-1/2", (Long Tongue), Cap Screw; (A) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2", (13'-10" Through 19'-10") (10,000 Lb Chain), Cap Screw; 3/4" X 7-1/2", (Long Tongue), Cap Screw; 3/4" X 7-1/2" (Use On Tapered Spring), Cap Screw; 3/4" X 7-1/2" (5 X 7 Frame), Cap Screw; (C) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" (For 5 X 7 Frame), Cap Screw; (D: For 5 X 7 Frame) 3/4" X 7-1/2", Cap Screw; 3/4" X 7-1/2" R.H., Cap Screw; 3/4" X 7-1/2" (Long Tongue) (C) | 1 |
| 19***22 | Cap Screw; 3/4" X 8" 20, 000 Lb 28'7" Through 32'1",(For Chain), Cap Screw; 3/4" X 8" Tapered Standard, Cap Screw; 3/4" X 8" (Hs, Sae 8) (20'-11") (20,000 Lb Chain), Cap Screw; 3/4" X 8" (Hs, Sae 8) (29'-3" Through 32'-1") (20,000 Lb Chain), Cap Screw; 3/4" X 8" Hs, Sae 8, Cap Screw; 3/4" X 8", Cap Screw; (B: Used With Weight Bracket) 3/4" X 8", Cap Screw; 3/4" X 8" Used With Weight Bracket, Cap Screw; 0,75" X 80", Cap Screw; 3/4" X 8" (Hs, Sae 8), Cap Screw; (E: ( -Xxxxxx) Serial No. 8450-00***26; 8650-00***31) 3/4" X 8" Hs, Sae 8, Cap Screw; 3/4" X 8" (Hs, Sae 8) (28'7" Through 32'1") (For 20,000 Lb Chain), Cap Screw; 3/4"X8", Cap Screw; 0,75" X 8", Cap Screw; 3/4" X 8" (Folding 3-Section Machines Only), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00***26; 8650-00***31) 3/4" X 8" Hs, Sae 8 | 1 |
| 24***03 | Washer; 25/32" X 2" X 0.180" (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", (12'-2' Through 15'-0") (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", Washer; 25/32" X 2" X 0.180", (13'-10" Through 19'-10") (10,000 Lb Chain), Washer; 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180" 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180", (For 10,000 Lb Chain), Washer; 25/32" X 2" X 0.180" Tension, Washer; 25/32" X 2" X 0.180", (12 Used L.H.) (12 Used R.H.) | 1 |
Single Point Depth Stop Adapter Kit (For Use With Tractors With High Hydraulic System Restriction) [C24]
John Deere : 640 - Disk : Single Point Depth Stop Adapter Kit (For Use With Tractors With High Hydraulic System Restriction) [C24]
| AH***68 | Hydraulic Hose - Fab; 3/4" X 1 473 mm (58") X 3/4" (20'-9" Through 26'-5"), Hydraulic Hose - Fab; 3/8" X 1473 mm (58") X 3/4", Hydraulic Hose - Fab; 3/8" X 1473 mm (58") X 3/4" (20'-9" Through 26'-5"), Hydraulic Hose - Fab; 3/4" X 1 473 mm (58") X 3/4", Hydraulic Hose - Fab; 9.5 mm (3/8") I.D. X 1 473 mm (58") Lg., Hydraulic Hose - Fab; 3/8" I.D. X 1473 mm (58") Lg., Hydraulic Hose - Fab, Hydraulic Hose - Fab; 10 mm I.D. X 1473 mm Long (3/8" X 58") Pressure, Hydraulic Hose - Fab; 10 mm X 1473 mm (3/8" X 58") Long, Pressure | 1 |
| AN***79 | Hydraulic Hose; (B: (For Machine With 14-1/2 Foot Frame)) 3/4" X 1041 mm X 3/4", Hydraulic Hose; 3/8" X 1041 mm (41") X 3/4", Hydraulic Hose; 3/8" X 1041 mm (41") X 3/4" (20'-9" Through 26'-5"), Hydraulic Hose; (D: (For 36 Foot Machine And 41 Foot Machine W/Low Transport Attachment)) (E: (For 41 Foot Machine)) 3/4" X 1041 mm X 3/4", Hydraulic Hose; (D: (For 36 Foot Machine)) (E: (For 41 Foot Machine)) 3/4" X 1041 mm X 3/4", Hydraulic Hose, Hydraulic Hose; 41" (1041 mm), Hydraulic Hose; 3/4" X 1 041 mm (41") X 3/4" (20'-9" Through 26'-5"), Hydraulic Hose; (C) (F) 3/4" X 1 041 mm (41") X 3/4", Hydraulic Hose; (B) 3/4" X 1 041 mm X 3/4", Hydraulic Hose; 3/4" X 1 041 mm X 3/4", Hydraulic Hose; 3/4" X 1041 mm X 3/4", Hydraulic Hose; (A) 3/4" X 1 041 mm X 3/4", Hydraulic Hose; 3/4" X 1 041 mm (41") X 3/4" | 1 |
| AT***68 | Tee Fitting; (Sub For Aa32207), Tee Fitting, Tee Fitting; (Sub For 0071347729), Tee Fitting; 3/4"-16 37° F X (2) 3/4"-16 37° M | 1 |
Single Point Hydraulic Depth Stop Attachment [C20]
John Deere : 640 - Disk : Single Point Hydraulic Depth Stop Attachment [C20]
| 11***28 | Pin, Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 5 X 32 mm, Pin; 5 X 32 mm, Pin; 5 X 32 mm, (Use With A32475), Pin; (A) 5 X 32 mm, Pin; 5 X 32 mm, (U/W Heavy Duty Dual Axle), Pin; M5 X 35, Pin; 5x32mm (Sub For 11h210), Pin; 5 X 32 mm (0.197" X 1.260"), Pin; 5 X 32 mm (Use With A32475), Pin; 5 X 32 mm (Export Only), Pin; (A: Syncshuttle Transmission - 5420: Sn -44***59, 5520: Sn -45***00) 5 X 32 mm, Pin; 5 X 35 mm, Pin; 5x32mm, Pin; 5x32 mm, Pin; 5/32", Pin; 5x35mm, Pin; 5 X 32 mm (Sub For Er025578 Appl), Pin; 5 X 30 mm (Sub For 11m1402), Pin; 5 X 32 mm, (Use With Ty20280), Pin; 5 X 32 mm, (Next To Shifter Lever), Pin; (C: 2-Joint Hookup) 5 X 32 mm, Pin; 3/16"X3/4, Pin; 5 X 32mm, Pin; 5 X 32 mm 5x32mm, Pin; 5x32mm (Sub For 11h216), Pin; 5 X 32 mm, (1 Used, 327; 3 Used, 337), Pin; 5 X 32 mm (Sub For Er025578, Appl), Pin; 5 X 32 mm M5 X 32 mm, Pin; Rh, Lh, 5 X 32 mm, Pin; 5 X 32 mm, 1 320 mm, Pin; (A), Pin; 5 X 32 mm, 4-Row Wide, Pin; 5 X 32 mm 5 X 32 mm, Pin; (A: 5303 (-00***13), 5403 (-00***75).), Pin; 5 X 32 mm, (Sub For 11h218) | 1 |
| 19***52 | Cap Screw; 5/16" X 4" Use W/Remote Wagon Hitch, Cap Screw; 5/16"X4", Cap Screw; 5/16" X 4" (Hs, Sae 8), Cap Screw; 5/16" X 4" (Adjusting Strap To Thermostat Housing), Cap Screw; 5/16" X 4", Cap Screw; 5/16" X 4" Hs=8, Cap Screw; 5/16" X 4" (Nlr), Cap Screw; 5/16" X 4" Hs, Sae 8, Cap Screw; 5/16" X 4" 1-Pc Pump Cover, Cap Screw; (Access Cover To Timing Gear Cover), Cap Screw; 5/16" X 4", Torque To 26 Lb-Ft (35 N-M), Cap Screw; (A) 5/16" X 4" | 2 |
| 24***84 | Washer; 25/32" X 1-1/4" X 0.105", (4 Maximum), Washer; 25/32" X 1-1/4" X 0.105", Washer, Washer; (B) 25/32" X 1-1/4" X 0.105", Washer;.105" X 25/32" X 1.25", Washer; 19.837 X 31.750 X 2.667 mm, Washer; 25/32" X 1-1/4" X 0.105" Idler Assembly. To Frame, Washer;.105" X 25/32" X 1-1/4", Washer; 25/32" X 1-1/4" X.105" | 1 |
Slow Moving Vehicle Post [D02]
John Deere : 640 - Disk : Slow Moving Vehicle Post [D02]
| 12***02 | Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70***00) 9550sh ( -70***00)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (70***01- ) 9550sh (70***01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual) | 2 |
| 14***86 | Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (69***01-) & 9750 (69***01-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-01***00; 4255-01***00; 4455-02***00) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-00***30; 8760-00***21; 8960-00***36) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-70***00) 9550sh (-70***00)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-69***00) & 9750 (-69***00)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-70***00) & 9750sts (-70***00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4" | 2 |
| 21***02 | Screw; 1/4" X 5/8" (Use With 14h786), Screw; 1/4"X5/8", Screw; 1/4" X 5/8", Screw; 1/4" X 5/8", Use With Endwise Transport | 2 |
Spindle, Hub, And Wheel [A21]
John Deere : 640 - Disk : Spindle, Hub, And Wheel [A21]
| 11***87 | Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm | 1 |
| 14***86 | Nut; 3/4" (Sub For 14h902), Nut; 3/4" Hex Slotted, Nut; 3/4", Nut; 3/4" 3/4" Unf Slotted, (Sub For 14h902), Nut; 3/4", (Sub For F2664r), Nut; 3/4" (Hex Slotted), Nut; 3/4" Fine Thread, Nut, Nut; 3/4", (Sub For 14h902) (Use With An280725), Nut; (B) 3/4", Nut; 19.050 mm (3/4"), Nut; 3/4" Unf, Nut; 3/4" Slotted, Nut; 3/4" 3/4", Slotted, (Sub For 14h902), Nut; (B) No. 0.210, Nut; (C: Part Of Ar109180 Adjustable Front Axle) 3/4", Nut; 19.050 mm, 3/4", Nut; 3/4" Unf Slotted, Nut; 3/4", Slotted, Unf, (Sub For 14h902), Nut; 1", Nut; 3/4" 3/4", Nut; 3/4", Unf, (Sub For 14h902), Nut; No 0.210, Nut; 3/4" 3/4", (U/W Standard And Spring Suspension Axles), Nut; 3/4", Slotted, Nut; 3/4", (Sub For 14h902), Nut; 3/4" 3/4", Slotted, Nut; (A) 3/4", Nut; No. 0.210, Nut; (Ord L42080, Al177933, Al177930), Nut; 3/4" Slotted, (Sub For 14h902) | 1 |
| AH***17 | Seal; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")), Seal; (B), Seal, Seal; (A) (B), Seal; (A) | 1 |
Stabilizer Wheel Support (Left Hand Illustrated) (Serial Number 581- ) [A24]
John Deere : 640 - Disk : Stabilizer Wheel Support (Left Hand Illustrated) (Serial Number 581- ) [A24]
| 03***99 | Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301) | 4 |
| 11***30 | Cotter Pin; (A: 24r20) (B: 31/32r15) 5 X 40 mm, Cotter Pin; (A: Main Frame) (B: Wing Frame) 5 X 40 mm, Cotter Pin; 0.197" X 1.575", Cotter Pin; (A: 5303 (-00***13), 5403 (-00***75)) 5 X 40 mm, Cotter Pin; (Sub For Pt19056), Cotter Pin; 5x40mm (Sub For L36469), Cotter Pin; (A: 9550 (69***01-) 9550sh (69***01-)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (0.197" X 1.575"), Cotter Pin; 5x40mm, Cotter Pin; (A) 5 X 40 mm, Cotter Pin; 5 X 40 mm, (Sub 11m7073), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 5 X 40 mm, (Use With N60865), Cotter Pin; 5 X 40 mm (For Ah219841), Cotter Pin; 5 X 55 mm (Sub For 11m1405), Cotter Pin; (Sub For 11h218), Cotter Pin; 5 X 40 mm (912), Cotter Pin; (A) 5x40mm, Cotter Pin; (B) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, Cotter Pin; 5 X 40mm, Cotter Pin; (B: Part Of Ar109180 Adjustable Front Axle) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For Pt19056), Cotter Pin; 5 X 40 mm, (Sub For 11h218), Cotter Pin; (A: Db44 (24r22)) (B: Db58 (32r22), Db80 (32r30), Db60 (36r20), Db66 (36r22) And Db90 (36r30)) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m1405), Cotter Pin, Cotter Pin; M5 X 40 Zn, Cotter Pin; 5/32"X1-1/2", Cotter Pin; (B: 12.5 Foot) 5 X 40 mm, Cotter Pin; 5 X 40 mm (Sub For 11m7073, This Application), Cotter Pin; 5 X 45 mm, Cotter Pin; (A: Syncshuttle Transmission - 5420: Sn 44***60-, 5520: Sn 45***01-) 5 X 40 mm, Cotter Pin; (A) 0.197" X 1.575", Cotter Pin; 5 X 40 mm, (Sub For Mg87398), Cotter Pin; (B) 5x40mm, Cotter Pin; 5 X 40 mm, (Sub W29648, H135175 And H135176), Cotter Pin; 5x45mm | 1 |
| 11***40 | Cotter Pin; (B: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm (Hs=10.9), Cotter Pin; (A: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6,3 X 50mm, Cotter Pin; 6.300 X 50 mm, Category Ii, Cotter Pin; (D) 0.248" X 1.969", Cotter Pin; 6.300 X 50 mm, (Use With N186178), Cotter Pin; 6.300 X 50 mm (For P74011), Cotter Pin; 6.300 X 50 mm (Use With N186178), Cotter Pin; 6.300 X 50 mm (For A89333 And A89334), Cotter Pin; 6.300 X 50 mm, (4 Used With 3-Point Hitch, 8 Used With Loader), Cotter Pin; (B: Pull-Type Rotary Cutter Only) 6.300 X 50 mm, Cotter Pin; (B) 0.248" X 1.969", Cotter Pin; 6 X 50 mm (Sub For 11m1416), Cotter Pin; (A: 12'-6" To 27'-6") 6.300 X 50 mm, Cotter Pin, Cotter Pin; 6.300 X 50 mm, Cotter Pin; (A: Baler With Precutter) 6.300 X 50 mm, Cotter Pin; (B: For Baletrak) 6.300 X 50 mm, Cotter Pin; 6,3x50mm, Cotter Pin; (A: Hitch) 6.300 X 50 mm (Cat-Ii), Cotter Pin; 6,3 X 50 mm, Cotter Pin; 6.300 X 50 mm (0.248" X 1.969"), Cotter Pin; 6.300 X 50 mm, (Use Without Mechanical Front Wheel Drive), Cotter Pin; (D: Not For Elc Plus Monitor) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm, (Sub For 11h249), Cotter Pin; 0.248" X 1.969" | 1 |
Stablilizer Wheel Attachment (Serial Number -580) [A22]
John Deere : 640 - Disk : Stablilizer Wheel Attachment (Serial Number -580) [A22]
| 12***94 | Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01***87 And Between Serial Numbers 01***97-01***67) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,61***46-; 1243,62***77-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***85; 8650-00***13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8" | 1 |
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 9 |
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 4 |
Standards And Bearings [B07]
John Deere : 640 - Disk : Standards And Bearings [B07]
| 03***99 | Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301) | 3 |
| 03***51 | Bolt; Round Head, Square Neck, 1/2 X 1, Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1", Used With Steel Housing (Illustrated), Bolt; 1/2" X 1", Pump Shield, Bolt; (E) 1/2" X 1", Bolt; 1/2" X 1", Bolt; (B) (C) 1/2" X 1", Bolt; (D) 1/2" X 1", Bolt; 1/2" X 1", (Use With 14h1040 And 12h301), Bolt; (C) (D) 1/2" X 1", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1", Bolt; (B) (C) (D) 1/2" X 1", Bolt; (C) 1/2" X 1", Bolt; (B) 1/2" X 1", Bolt; (D), Bolt; (C), Bolt, Bolt; 1/2"-13 X 3, Bolt; (E), Bolt; 1/2"X1" | 1 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 4 |
Stop, Selective Control Valve For Use With Hydraulic Wing Control Attachment [C16]
John Deere : 640 - Disk : Stop, Selective Control Valve For Use With Hydraulic Wing Control Attachment [C16]
| R5***33 | Stop; (Sub For (1) Ar62598) (Tractor With Sound-Gard Body), Stop; (A: Flush Face), Stop; Selective Control Valve Stop, (Sub For Ar62598), Stop; Selective Control Vavle Stop, (Sub For Ar62598), Stop, Stop; (Sub For Ar62598) (Less Detent), Stop; Selective Control Valve St0p, (Sub For Ar62598), Stop; (Sub For Ar62598), Stop; (B: With Sound-Gard Body) (Sub For Ar62598), Stop; (Tractor With Sound-Gard Body), Stop; (Tractor With Sound-Gard Body) (Rubber, Cut To Length Required), Stop; (C) (Sub For Ar62598), Stop; Lever Stop (Less Detent) (Sub For Ar62598) | 1 |
Touchset Depth Control System [C22]
John Deere : 640 - Disk : Touchset Depth Control System [C22]
| 11***83 | Cotter Pin; (C) 3.200 X 50 mm, Cotter Pin, Cotter Pin; 3.200 X 50 mm, (Power Rear Wheel Drive) (Sub For 11h237), Cotter Pin; 1/2" X 2", (Sub For 11h237), Cotter Pin; 3.200 X 50 mm (Sub For 11m7086), Cotter Pin; 0.126" X 1.969", Cotter Pin; 3.200 X 50 mm (Sub For Er025567 Appl), Cotter Pin; 3.200 X 50 mm (Use With R109418 Or R105248), Cotter Pin; (C: Part Of Ar109180 Adjustable Front Axle) 3.200 X 50 mm, Cotter Pin; 3.200 X 50 mm Lower, Cotter Pin; 3.200 X 50 mm (Sub For 11h237), Cotter Pin; 3x28mm, Cotter Pin; 3.200 X 50 mm (Use With R105248), Cotter Pin; 3.200 X 50 mm 1/8" X 2" (Sub For 11h237), Cotter Pin; (B) 3.200 X 50 mm, Cotter Pin; 3.200 X 50 mm, Cotter Pin; (A: 5303 ( -00***02) , 5403 ( -00***78).) 3.200 X 50 mm, Cotter Pin; 3.200 X 50 mm, (Sub For 11h237), Cotter Pin; 3.200 X 50 mm (Use With T100810), Cotter Pin; 3.200 X 50 mm (Sub For Er025566 Appl), Cotter Pin; 3.200 X 50 mm (C), Cotter Pin; 3.200 X 50 mm, (Sub For Mg80618), Cotter Pin; 1/8" X 2", Cotter Pin; 3.200 X 50 mm, (Sub For 11m7083) | 1 |
| 12***60 | Washer; 5,3mm, Washer; 5.300 mm (20 W/Sgb) (17 W/O Sgb), Washer; 5.300 mm, (Sub For 12h295), Washer; No.10, Washer; 0.209", No.10, Washer; 5.300 mm, (A), Washer; 5.300 mm (Sub For Au43855) (Use With 21h1298), Washer; No. 10, For 3179dl001, Washer; 0.209", (Tractors) (Sub 12m7060), Washer; 5.300 mm (4640, 4650, 4840, 8430, 8450), Washer; 5mm (Sub For 12m7064 Appl), Washer; 0.209", Lower, Washer; 5 3mm, Washer; (A: See Your Authorized Pump Repair Station For Parts Not Listed) 5.300 mm, Washer, Washer; 0.209", (2 Used Gasoline And Lp-Gas) (3 Used Diesel), Washer; (A) 0.209", Washer; 5.300 mm (A), Washer; 0.209", (Code 1602 And 1603), Washer; 5.300 mm (Use With 14h631), Washer; 0.209", (16 Used With Cab) (24 Used With Air Conditioning), Washer; 5.300 mm (Sub For Mg86541779 Or Mg618086), Washer; 5mm (Sub For 12m7064), Washer; 5.300 mm (19 W/ Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Washer; (C), Washer; 0.209", Washer; 5.300 mm 5, 3 mm, Washer; 5.300 mm (Sub R74466), Washer; 5.300 mm (Sub For 12h295), Washer; 5.300 mm 53mm, Washer; (C: Sgb (53***01-)) 5.300 mm, Washer; 0.209", Washer; 5.3x10x0.6mm, Washer; 0.209", External Tooth, Washer; (A: (95 Amp) 9550 (-70***00) 9550sh (-70***00)) 5.300 mm, Washer; (A), Washer; 5.300 mm Internal Tooth, No. 10, Washer; 5,3 mm, Washer; 0.209", (10 Used Syncro-Range) (11 Used Power Shift), Washer; (A: Also Furnished On The 8760 (Pst)) 5.300 mm, Washer; M5, Washer; (A: Cd6068dl070) 5.300 mm, Washer; 0.209", Not Applicable, Washer; (A) 5,3mm, Washer, Washer; 5,3 X 10 X 0,6 mm, Washer; 5,3x10x0,6mm, Washer; 5.300 mm, ((5) 3010, 3020*), Washer; 5mm, Washer; 5.300 mm No. 10, Washer; (A: See Your Authorized Pump Repair Station For Parts Not Listed) (B: Cd4045tl051, Cd6068dl050) 5.300 mm, Washer; 5.300 mm 3/16", Washer; 5.300 mm, Washer; 5.300 mm Air Heater (Breaks Paint For Ground), Washer; 5.300 mm (4650, 8430, 8450), Washer; No. 10, Washer; (A) (B) 5.300 mm (0.209"), Washer; 5.300 mm (8630, 8640), Washer; 0.209", (2 Used Gasoline And Lp Gas) (3 Used Diesel), Washer; 5.300 mm (19 W/Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Washer; (K) 5.300 mm, Washer; (A) 5.300 mm, Washer; Id = 5,3 mm, Washer; (A) Nr. 10, Washer; No. 10, For 3179dl016, Washer; 5.3mm, Washer; (A) 5.300 mm (0.209"), Washer; 5 mm, Washer; (A: 6068dl070) 5.300 mm, Washer; 0.209", Internal Tooth, Washer; 0.209", (Use With Code 7201), Washer; 5.300 mm (0.209"), Washer; 5.300 mm Alternator Ground Terminal (Breaks Paint For Ground), Washer; (A) External Tooth, (Sub 12h295), Washer; 5.300 mm, Washer; 5.300 mm, Not Applicable, Washer; 5.300 mm (Sub 12m7060), Washer; 5.300 mm Lh, Rh, Washer; 5.300 mm (4050), Washer; (B) 0.209", Washer; 5.300 mm (A) (B) | 2 |
| 14***31 | Nut; (A: 9901 With Temperature And Oil Pressure Gages) (B: 9902 For Enclosure Field) 0.190", Nut; 0.190", Square, Nut; 0.190" (Use With Am53945), Nut; 0.190", (Export), Nut; M6, Nut; N0.10, Nut; (A) No 10, Nut; (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" (Sender), Nut; 0.190", Unf, Nut; (A) 0.190" 0.19", Nut; (A) (B) 0.190", Unf (4 Used Per Module), Nut; (C) 0.190", Nut; 0.190", (Sub For N198083), Nut; (B) 0.190", Nut; 0.190" No. 10 Unf, Nut; 0.190", (English), Nut; (Sub Ar102763) (Also Order 12h295), Nut; 0.190", (2-On Circuit Breaker Terminals, 2-Hold Circuit Breaker To Panel, 1-Motor To Tab On Door), Nut; 0.190" No. 10 (8630, 8640), Nut; No. 10-32, Unf (4 Used Per Module), Nut; No. 10-24, (Sub For Ty4057), Nut; 0.190" (4650, 8430, 8450), Nut; No. 10-24, Nut; No. 10, Unf, Nut; (A) No. 10, Nut; 4.826 mm, Nut; No. 10-32, Unf, Nut; 0.190", Nut; 0.190" (Part Of Re15583), Nut; 4.826 mm (0.190") Unf, Nut; 0.190", (200 Per Package) (Sub For Mg87825), Nut; (A) No.10, Nut; N.10, Nut; (B) No.10, Nut; 0.190" (Sub For 14h778, This Application), Nut; 0.190" 5/16", Nut; 10-24, Nut; (B: With Cab) 0.190", Nut; 0.190", (10 Used Syncro-Range) (11 Used Power Shift), Nut; 0.190", No.10, Nut; 0.190", (Sub For Ty4057), Nut; Unf No 10, Nut; 4.826 mm (0.190") No. 10, Nut; 0.190", Unf (With Iron-Gard), Nut; Hex, 10-24, Nut; No 10, Nut; 0.190", Machine Screw, Nut; (A) 0.190", Unf, Nut; 0.190", (16 Used With Cab) (24 Used With Air Conditioning), Nut; 0.190", For Units And Auger Shaft, Nut; 0.190", (A), Nut; (B: Also Includes Sn:) 0.190", Nut; 0.190", (Use With Re41759) (3011, 3016), Nut; 0.190", (2 Used Gasoline And Lp Gas) (3 Used Diesel), Nut; 0.190", (Starter Motor Solenoid Terminal), Nut; 0.190", Germany, Nut; 0.190" (4640, 4650, 4840, 8430, 8450), Nut; No 10, Ar, Nut; 0,190", Nut, Nut; 0.190", 200 Per Package, Nut; 0.190", North America, Nut; 0.190" (Also Order 12m7060), Nut; 0.190" (19 W/ Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 4.826 mm (0.190"), Nut; (A) 0.190", Nut; 0.190", (2 Used Gasoline And Lp-Gas) (3 Used Diesel), Nut; 0.190" (20 W/Sgb) (17 W/O Sgb), Nut; No. 10, Nut; No.10, Nut; (A: If Equipped) 0.190", Nut; (A), Nut; (A) No. 10-32, Unf, Nut; 0.190", (Use With Code 7201), Nut; 0.190", Unf, (2) Furnished With Additional Function, Nut; (A) (B) 0.190", Nut; (A: 3201 Panel Gages Sp Cntrl) (B: 3202 Panel Gages Sp Cntrl) (C: 3208 Panel Gages Sp Cntrl) 0.190", Nut; 0.190", Lock, Nut; 0.190", Df, Tf, Af, Nut; 0.190", (Sub For Ar102763), Nut; 0.190", All Other European Countries, Nut, Nut; 0.190", Not Used This Application, Nut; 0.190" (For Ar56671), Nut; (A) (B) No. 10-32, Unf, Nut; 0.190" (4050), Nut; 4.826 mm (0.190") No. 10 (8630, 8640), Nut; (K) 0.190", Nut; 0.190" (A), Nut; (A) (B) (C) 0.190", Nut; 0.190", 200 Per Package, (Sub For Mg87825), Nut; 4.826 mm, Nut; 0.190", (Gasoline), Nut; 0.190" (Sub For Ar102763) (Also Order 12h295), Nut; 0.190" 0.190", Nut; 0.190", No. 10, Nut; 0.190" (19 W/Mechanical Front Wheel Drive) (17 W/O Mechanical Front Wheel Drive), Nut; 0.190", (Use With Ar11109 Or Ar11116), Nut; (A: With Intelliguard) 0.190", Nut; 0.190" (Sub Ar102763) (Also Order 12h295), Nut; 0.190", Nut; 0.190", Not Applicable, Nut; 0.190" (Use With At100083 And At100084), Nut; (C: Sgb (53***01-)) 0.190", Nut; 0.190" (10-32 Unf), Nut; 0.190" (Use With Re207840) | 2 |
Transport Lockup (Serial No. -451) [C25]
John Deere : 640 - Disk : Transport Lockup (Serial No. -451) [C25]
| AN***01 | Clevis; (Sub For An183593), Clevis; (28'-7" Through 32'-1") (Sub For A44733), Clevis; 30 Ft. And 25 Ft. (Includes Decal) (8" Clevis), Clevis; 8", (Sub For An183593), Clevis; 18'-1" Through 20'-11", (Sub For An183593), Clevis; (29'-3" And 32'-1") (Includes Decal), Clevis; 8" (Sub For An183593) (Single Point Depth Control), Clevis; 8" (Single Point Depth Control) (Includes Decal) (Sub For An183593), Clevis; (Includes Decal) (Use With Hydraulic Stroke Control, Dual Lift Cylinders), (Sub For An183593), Clevis; (Includes Decal) (Sub For An183593), Clevis; (Sub For A44733 Or An183593), Clevis, Clevis; 30 Ft. And 25 Ft. (Includes Decal) | 1 |
| AN***65 | Clevis; (Sub For An240503), Clevis; (Illustrated) (12'-2" Through 26'-5") (Sub For A22103 Or An240503), Clevis; 13'-10" Through 15'-3", (Sub For A22103 Or An240503), Clevis; (12'-2" Through 26'-5") (Includes Decal) (Illustrated) (Sub For An240503), Clevis; (Sub For An240503) Includes N238484 Label, Clevis; (Sub For A22103 Or An240503), Clevis; (Sub For A22103 Or An240503)Includes N238484 Label, Clevis; (Sub For A22103 Or An240503) Includes N238484 Warning Label, Clevis; (Sub For A22103 Or An240503) Includes N238484 Label | 1 |
| B1***27 | Pin; (B) 11.125 X 76.200 mm (7/16" X 3"), Pin; 7/16" X 3", Pin; 11.125 X 76.200 mm (7/16" X 3"), Pin, Pin; 11.125 X 76.200 mm, Pin; 7/16 X 3, Pin; (A) (C) (D) 11.125 X 76.200 mm (7/16" X 3"), Pin; 30 Ft. And 25 Ft., Pin; (C) (D) 11.125 X 76.200 mm (7/16" X 3"), Pin; (A) (B) 11.125 X 76.200 mm (7/16" X 3") | 1 |
Warning Lights [D03]
John Deere : 640 - Disk : Warning Lights [D03]
| 12***01 | Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036) | 1 |
| 14***56 | Nut; (A) (B) 1/2", Nut; 1/2" (Ambient Temp. Sensor To Mounting Strap), Nut, Nut; 1/2" (R), Nut; 1/2", (Ambient Temp. Sensor To Mounting Strap), Nut; 1/2" (Sub For R30252), Nut; 12.700 mm (1/2"), Nut; (A: Upto Sr.No.5103e-00***53, 5103-01***64, 5103s-01***61, 5203-00***61.) 1/2", Nut; (B) 1/2", Nut; 12.700 mm, Nut; (A: From Sr.No:5103e-00***17, 5103-01***36, 5103s-01***52, 5203-00***81, 5038d-00***01.) 1/2", Nut; (A) 1/2", Nut; 1/2", (4 Used With Re69223), Nut; 1/2", Nut; (A) 1/2" (Sub For R30252), Nut; 1/2", (Sub For At209762), Nut; (A: Upto Sr.No.5103s-01***61, 5203-00***61.) 1/2", Nut; 1/2", Unf, Nut; 1/2", (Use With Ar57247 And R52586), Nut; (A: From Sr.No.5103e-00***54, 5103-01***65, 5103s-01***62, 5203-00***62, 5104/5204-00***01, 5038d-00***01.) 1/2", Nut; (A) 1/2", Nut; 1/2" | 1 |
| 19***92 | Cap Screw; X X (A) 1/2" X 1", Cap Screw; 3/8"X1-1/4" Front, Cap Screw; (B) 1/2"X1", Cap Screw; 1/2" X 1", (Sub For Mg87909), Cap Screw; (A), Cap Screw; (B: Tractor Serial No.) 1/2" X 1", Cap Screw; (Use With H622dn), Cap Screw; X 1/2" X 1", Cap Screw; 1/2" X 1", (12 Used For 714, 714a; 10 Used For 716, 716a), Cap Screw; (A) 1/2" X 1", Cap Screw; 1/2"X1-1/4", Cap Screw; 1/2" X 2", Cap Screw; 1/2" X 1", (Without External Antenna), Cap Screw; 1/2" X 1" (Use With 12h301), Cap Screw; 1/2" X 1" (6359tr), Cap Screw; 1/2" X 1", (336 And 346 Balers), Cap Screw; 1/2"X1" (Sub For 19h2508 Appl), Cap Screw; 1/2" X 1", (Roll-Gard Or Sound-Gard), Cap Screw; 1/2" X 1", (Use With An103539), Cap Screw; 1/2" X 1", For 870, Cap Screw; X 1/2" X 1", Cap Screw; 1/2" X 1", Use With Aa32826 Only, Cap Screw; (A) (B) 1/2" X 1", Cap Screw; 1/2" X 1" (Gasoline), Cap Screw; 1/2" X 1" (Flexible), Cap Screw; 1/2"X1" Front, Cap Screw; 1/2"X1" (For Al39725), Cap Screw; 1/2" X 1", (12 Used For 714, 714a; 14 Used For 716, 716a), Cap Screw; 1/2" X 1" Mg86574444, Cap Screw; 1/2" X 1", For R100074, Cap Screw; 1/2" X 1" (For Al39725), Cap Screw; 12.700 X 25.400 mm (1/2" X 1"), Cap Screw; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2" X 1", Cap Screw; 1/2x1, Cap Screw; 1/2"X1",Front, Cap Screw; 1/2" X 1", (Use With Aircraft Tire), Cap Screw; (A) (B) 1/2"X1", Cap Screw; 1/2"X1", Cap Screw; 1/2"X1" (Sub For 19h2508), Cap Screw; 1/2" X 1", For 6 X 12 2-Ply Tire With Tube, Cap Screw; (A) 1/2"X1", Cap Screw; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2" X 1", Cap Screw; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2" X 1", Cap Screw; 1/2" X 1" (Flex), Cap Screw; (B) 1/2" X 1", (Ut), Cap Screw; 1/2" X 1" 1/2 Unc-2a X 1 A17d Zn, Cap Screw; 1/2" X 1", (Use With 12h301), Cap Screw; 12.700 X 25.400 mm, (Sub F1005016), Cap Screw; (B) 1/2" X 1", (Use With Aircraft Tire), Cap Screw; 1/2" X 1" (Lh), Cap Screw; 1/2" X 1" (Use With 14h1040 And 12h301), Cap Screw; 1/2x1", Cap Screw; 1/2" X 1", (16 Used For 714, 714a; 20 Used For 716, 716a), Cap Screw; 1/2" X 1", Unc, Cap Screw; 1/2" X 1", (32 Used With Hay Knife), Cap Screw; 1/2"X1", Front, Cap Screw; 1/2" X 1", Part Of Ae41701, Cap Screw; (A) 1/2"X1", Front, Cap Screw; 1/2" X 1", (Roll-Gard Or Sound-Gard Body), Cap Screw; (Sub F1005016), Cap Screw; 1/2" X 1", Cap Screw; 1/2" X 1" (Without External Antenna), Cap Screw; 1/2" X 1", For 850, Cap Screw; 1/2" X 1" (Use With 12h301 And 14h1040), Cap Screw, Cap Screw; 1/2" X 1", (4 Used For 714, 714a; 6 Used For 716, 716a), Cap Screw; 1/2" X 1", For 760 And 850, Cap Screw; 1/2" X 1", (United Kingdom Only), Cap Screw; 1/2", Cap Screw; 1/2"X1" (Rear), Cap Screw; 1/2" X 1" Front, For R100074, Cap Screw; 1/2" X 1", Without External Antenna, Cap Screw; 1/2" X 1" L.H., Bolt, Cap Screw; (B) 1/2" X 1", Cap Screw; 12.700 X 25.400 mm (1/2" X 1"), Cap Screw; 1/2" X 1", For 790 And 870, Cap Screw; X 1/2" X 1", Cap Screw; 1/2" X 1", 1/2" X 1" | 1 |
Wear Guard [B05]
John Deere : 640 - Disk : Wear Guard [B05]
| 03***22 | Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" | 1 |
| 03***64 | Bolt; 1/2" X 1-3/4", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" Lh, Bolt; 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4", (3.7 M (12-Ft.) Platform, Less Conditioner), Bolt; 1/2" X 1-3/4", L.H., Bolt; 1/2" X 1-3/4" Fourth Hole From Drive End, Bolt; 1/2" X 1-3/4", (Sub For E50302), Bolt; 1/2" X 1-3/4" (Use With 14h812), Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt; (A) 1/2" X 1-3/4", Bolt; (A) (C) 1/2" X 1-3/4", Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040) | 1 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 1 |
Wheel Frame (Main) [A18]
John Deere : 640 - Disk : Wheel Frame (Main) [A18]
| 14***86 | Nut; 3/4" (Sub For 14h902), Nut; 3/4" Hex Slotted, Nut; 3/4", Nut; 3/4" 3/4" Unf Slotted, (Sub For 14h902), Nut; 3/4", (Sub For F2664r), Nut; 3/4" (Hex Slotted), Nut; 3/4" Fine Thread, Nut, Nut; 3/4", (Sub For 14h902) (Use With An280725), Nut; (B) 3/4", Nut; 19.050 mm (3/4"), Nut; 3/4" Unf, Nut; 3/4" Slotted, Nut; 3/4" 3/4", Slotted, (Sub For 14h902), Nut; (B) No. 0.210, Nut; (C: Part Of Ar109180 Adjustable Front Axle) 3/4", Nut; 19.050 mm, 3/4", Nut; 3/4" Unf Slotted, Nut; 3/4", Slotted, Unf, (Sub For 14h902), Nut; 1", Nut; 3/4" 3/4", Nut; 3/4", Unf, (Sub For 14h902), Nut; No 0.210, Nut; 3/4" 3/4", (U/W Standard And Spring Suspension Axles), Nut; 3/4", Slotted, Nut; 3/4", (Sub For 14h902), Nut; 3/4" 3/4", Slotted, Nut; (A) 3/4", Nut; No. 0.210, Nut; (Ord L42080, Al177933, Al177930), Nut; 3/4" Slotted, (Sub For 14h902) | 2 |
| 19***11 | Cap Screw; (C) (D) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/4" X 2-1/2" (Hs, Sae 8) Top Holes, Cap Screw; (B) (C) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) Quantity Varies With Wing Size, Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) Quantities Vary With Wing Size, Cap Screw; (B) 3/4" X 2-1/2" (4050, 4055, 4250, 4255, 4450, 4455 Tractors), Cap Screw; 3/4" X 2-1/2", (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2", Cap Screw; 3/4" X 2-1/2", Hs, Sae 8; For 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4030, 4230, And 4430 Tractors, Cap Screw; 3/4" X 2-1/2", Hs Sae 8, Plated, Cap Screw; 19.050 X 63.500 mm, Cap Screw; (F) 3/4" X 2-1/2" (12-1/2') Top, Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) (Rear Top), Cap Screw; (A) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/4" X 2-1/2", Hs, Sae 8, Cap Screw; 3/4" X 2-1/2" (Sub For 19h1782), Cap Screw; 3/4" X 2-1/2" (Quantities Vary With Wing Size), Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8) (Quantities Vary With Wing Size), Cap Screw; 3/4" X 2-1/2" 3-1/2" X 13/32", Cap Screw; (B) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 0,75" X 2,5", Cap Screw; 3/4"X2-1/2" | 6 |
| AA***59 | Bearing | 4 |
Wing Fold Hydraulics (18'-1" Through 20'-11") (Serial Number -498) [C01]
John Deere : 640 - Disk : Wing Fold Hydraulics (18'-1" Through 20'-11") (Serial Number -498) [C01]
| 14***32 | Nut; (B) 9/16", Nut; (A: 9550 (69***01- ) 9550sh (69***01- )) 9/16", Nut; (A) 9/16", Nut; 9/16", Without Hydraulic Wing Control, Nut, Nut; 9/16" (W/O Hydraulic Wing Control), Nut; 9/16", Nut; Without Hydraulic Wing Control, Nut; (A: For 9650 (70***01- ) & 9750 (70***01- )) 9/16", Nut, Nut; (A: For 9650 ( -70***00) & 9750 ( -70***00)) 9/16", Nut; 9/16", Nut; 9/16" 9/16" | 2 |
| AH***58 | Hose; 1/4" X 977 mm (39") X 9/16", (Sub For Ae36985), Hose; (A) 9/16" X 978 mm (38-1/2") X 9/16", (Sub For Ae36985), Hose; 9/16" X 978 mm (38-1/2") X 9/16", Hose; 1/4" X 38 1/2" (For 32 1/2', 35 1/2', 37 1/2', And 39 1/2' Machines), Hose; (A: For Machines With 9'9" Frame) (B: For Machines With 11'9" Frame) 9/16" X 977 mm X 9/16", Hose; 9/16" X 977 mm X 9/16" (Sub For Ae36985), Hose; 9/16" X 978 mm (38-1/2") X 9/16", (Sub For Ae36985), Hose; 9/16" X 38-1/2" X 9/16", Hose; 9/16" X 978 mm (38-1/2") X 9/16" (W/O Hydraulic Wing Control) (Sub For Ae36985), Hose, Hose; 6 mm X 838 mm (1/4" I.D. X 33") Long (Sub For Ah94856), Hose; (A: For Machines With 9'9" Frame) (B: For Machines With 11'9" Frame) 9/16" X 977 mm X 9/16" (Sub For Ae36985), Hose; 6.35 X 978 mm (1/4 X 39"), Hose; 9/16" X 977 mm (38-1/2") X 9/16" Selector Valve Kit When Used With A Tractor With 2 Scvs, Hose; 9/16" X 978 mm (38-1/2") X 9/16", Lift Arm (Replaced Ar45235 This Application Only), Hose; 9/16" X 978 mm (38-1/2") X 9/16", Lift Arms (Replaced Ar45235 This Application Only), Hose; 9/16" X 977 mm (38-1/2") X 9/16", Hose; (A: Used With Optional Double Twine Arm) 9/16" X 977 mm (38-1/2") X 9/16", Hose; (A: Used With Optional Double Twine Arm) 9/16" X 977 mm X 9/16", Hose; 6 mm X 978 mm (1/4" I.D. X 38-1/2") Long (4-Wheel Drive Rear Axle), Hose; 6 mm X 978 mm (1/4" I.D. X 38-1/2") Long, Hose; 1/4" X 977 mm (39") 9/16", (Sub For Ae36985), Hose; 9/16" X 977 mm X 9/16", Hose; 1/4" X 38 1/2" (For 27 1/2' Machines), Hose; 9/16" X 978 mm (38-1/2") X 9/16", (Sub For Ae35596 And Ae36985), Hose; 1/4" X 977 mm (39") X 9/16" Without Hydraulic Wing Control, (Sub For Ae36985), Hose; 9/16" X 978 mm X 9/16", Hose; (A) 9/16" X 978 mm (38-1/2") X 9/16", Hose; (Sub For Ae36985), Hose; 1/4" X 38-1/2", Hose; (A: (For Machines With 11-1/2 Foot Frame)) 9/16" X 977 mm X 9/16" (Sub For Ae36985), Hose; 91.4 cm (36") Lg. (Sub For Ae36985) | 2 |
| AM***12 | Elbow Fitting; (Sub At35121 And R26448), Elbow Fitting, Elbow Fitting; With Hydraulic Wing Control (Includes O-Ring) (Sub At35121 And R26448), Elbow Fitting; (Includes O-Ring), Elbow Fitting; (For Dc52666), Elbow Fitting; (Without Double Windrow Attachment) (Sub At35121 And R26448), Elbow Fitting; 90° (Includes O-Ring), (Sub At35121 And R26448), Elbow Fitting; 90 Degree, (Sub At35121 And R26448), Elbow Fitting; With Hydraulic Wing Control, (Sub At35121 And R26448), Elbow Fitting; (B), Elbow Fitting; (Sub At35121 And R26448) 90°, Elbow Fitting; 90° (Sub At35121 And R26448), Elbow Fitting; (W/ Hydraulic Wing Control) (Includes O-Ring) (Sub At35121 And R26448), Elbow Fitting; (B: With Hydraulic Wing Control), Elbow Fitting; 90 Degree (Includes O-Ring), Elbow Fitting; 90°, (Sub At35121 And R26448), Elbow Fitting; 90 Degree | 4 |
Wing Fold Hydraulics (18'-1" Through 20'-11") (Serial Number 499- ) [C03]
John Deere : 640 - Disk : Wing Fold Hydraulics (18'-1" Through 20'-11") (Serial Number 499- ) [C03]
| 14***32 | Nut; (B) 9/16", Nut; (A: 9550 (69***01- ) 9550sh (69***01- )) 9/16", Nut; (A) 9/16", Nut; 9/16", Without Hydraulic Wing Control, Nut, Nut; 9/16" (W/O Hydraulic Wing Control), Nut; 9/16", Nut; Without Hydraulic Wing Control, Nut; (A: For 9650 (70***01- ) & 9750 (70***01- )) 9/16", Nut, Nut; (A: For 9650 ( -70***00) & 9750 ( -70***00)) 9/16", Nut; 9/16", Nut; 9/16" 9/16" | 2 |
| AA***09 | Pressure Relief Valv; (16'5"-22'2"), Pressure Relief Valv; (Includes O-Ring R26448), Pressure Relief Valv; (Includes O-Ringr26448), Pressure Relief Valv, Pressure Relief Valv; Thermal, Pressure Relief Valv; 2-1/2" X 8", Pressure Relief Valv; Thermal Relief, Pressure Relief Valv; (A), Pressure Relief Valv; Thermal, (Includes R26448), Pressure Relief Valv; (Includes R26448) Thermal, Pressure Relief Valv; With O-Ring (4000 Psi) | 1 |
| AH***58 | Hose; 1/4" X 977 mm (39") X 9/16", (Sub For Ae36985), Hose; (A) 9/16" X 978 mm (38-1/2") X 9/16", (Sub For Ae36985), Hose; 9/16" X 978 mm (38-1/2") X 9/16", Hose; 1/4" X 38 1/2" (For 32 1/2', 35 1/2', 37 1/2', And 39 1/2' Machines), Hose; (A: For Machines With 9'9" Frame) (B: For Machines With 11'9" Frame) 9/16" X 977 mm X 9/16", Hose; 9/16" X 977 mm X 9/16" (Sub For Ae36985), Hose; 9/16" X 978 mm (38-1/2") X 9/16", (Sub For Ae36985), Hose; 9/16" X 38-1/2" X 9/16", Hose; 9/16" X 978 mm (38-1/2") X 9/16" (W/O Hydraulic Wing Control) (Sub For Ae36985), Hose, Hose; 6 mm X 838 mm (1/4" I.D. X 33") Long (Sub For Ah94856), Hose; (A: For Machines With 9'9" Frame) (B: For Machines With 11'9" Frame) 9/16" X 977 mm X 9/16" (Sub For Ae36985), Hose; 6.35 X 978 mm (1/4 X 39"), Hose; 9/16" X 977 mm (38-1/2") X 9/16" Selector Valve Kit When Used With A Tractor With 2 Scvs, Hose; 9/16" X 978 mm (38-1/2") X 9/16", Lift Arm (Replaced Ar45235 This Application Only), Hose; 9/16" X 978 mm (38-1/2") X 9/16", Lift Arms (Replaced Ar45235 This Application Only), Hose; 9/16" X 977 mm (38-1/2") X 9/16", Hose; (A: Used With Optional Double Twine Arm) 9/16" X 977 mm (38-1/2") X 9/16", Hose; (A: Used With Optional Double Twine Arm) 9/16" X 977 mm X 9/16", Hose; 6 mm X 978 mm (1/4" I.D. X 38-1/2") Long (4-Wheel Drive Rear Axle), Hose; 6 mm X 978 mm (1/4" I.D. X 38-1/2") Long, Hose; 1/4" X 977 mm (39") 9/16", (Sub For Ae36985), Hose; 9/16" X 977 mm X 9/16", Hose; 1/4" X 38 1/2" (For 27 1/2' Machines), Hose; 9/16" X 978 mm (38-1/2") X 9/16", (Sub For Ae35596 And Ae36985), Hose; 1/4" X 977 mm (39") X 9/16" Without Hydraulic Wing Control, (Sub For Ae36985), Hose; 9/16" X 978 mm X 9/16", Hose; (A) 9/16" X 978 mm (38-1/2") X 9/16", Hose; (Sub For Ae36985), Hose; 1/4" X 38-1/2", Hose; (A: (For Machines With 11-1/2 Foot Frame)) 9/16" X 977 mm X 9/16" (Sub For Ae36985), Hose; 91.4 cm (36") Lg. (Sub For Ae36985) | 2 |
Wing Frames (18'-1" And 19'-10") [A15]
John Deere : 640 - Disk : Wing Frames (18'-1" And 19'-10") [A15]
| 08***71 | Cap Screw; 3/8" X 8-1/2" (Reg), Cap Screw; 3/8" X 8-1/2" (Hs, Sae 8), Cap Screw; 3/8" X 8-1/2", Cap Screw; 3/8" X 8-1/2", (Reg), Cap Screw; 3/8" X 8-1/2" Short Tooth Pickup, Cap Screw; (A) 3/8" X 8-1/2", Cap Screw; 3/8" X 8-1/2" L.H. | 4 |
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 2 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 2 |
Wing Frames (20'-11") [A16]
John Deere : 640 - Disk : Wing Frames (20'-11") [A16]
| 08***71 | Cap Screw; 3/8" X 8-1/2" (Reg), Cap Screw; 3/8" X 8-1/2" (Hs, Sae 8), Cap Screw; 3/8" X 8-1/2", Cap Screw; 3/8" X 8-1/2", (Reg), Cap Screw; 3/8" X 8-1/2" Short Tooth Pickup, Cap Screw; (A) 3/8" X 8-1/2", Cap Screw; 3/8" X 8-1/2" L.H. | 4 |
| 14***39 | Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61***45; 1243,-62***76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133) | 4 |
| 14***40 | Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00***94; 4755-00***68; 4955-00***13) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645,-62***00; 843,-61***66; 844,-62***00; 1243,-62***50), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h***46) (8 Used With 3h***61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-00***46; 4255-00***12; 4455-01***38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp) | 2 |
Wing Hinge (18'-1" And 19'-10") [B01]
John Deere : 640 - Disk : Wing Hinge (18'-1" And 19'-10") [B01]
| 14***58 | Nut; 3/4", (Sub For 14h794), Nut; 3/4" (28'7"-35'6"), Nut; 3/4", (Use With 115 Inch And 124 Inch Blades), Nut; 3/4" (16'5"-18'3"), Nut; (Sub For (8) R53023), Nut; 3/4", On Front Side Of Outer Rear Standard Only, Nut; (A) (B) (C) 3/4", Nut; 3/4", Front Nuts For Reflectors On R.H. And L.H. Rear Standards, Nut; (B) (C) 3/4", Nut; (C), Nut; 3/4", (Dura-Drum Cutterhead), Nut; 3/4", Bottom Outer Holes, Without Axle Extensions, Nut; 3/4", Nut; 3/4" (9, 11 And 13 Std), Nut; 3/4", (Coarse Thread), Nut; (A) 3/4", Nut; (F: Coarse Thread) 3/4", Nut; (C) 3/4", Nut; (E: ( -Xxxxxx) 4250-01***90; 4450-02***70) 3/4", Nut; 3/4", (Course Thread), Nut; 3/4", (Sub For K40016), Nut; (B) (C) (D) 3/4", (Coarse Thread), Nut; 3/4", (2-Joint Hookup), Nut; (D) 3/4", Nut; 19.050 mm, Nut; 3/4", (Use With 90 Inch And 97 Inch Blades), Nut; 3/4", Bottom Outer Holes, (6") Extensions, Nut; (A: (2) 13" Extensions) 3/4", Nut; 3/4" (Use With Aa69340), Nut; 3/4" (D), Nut; 19.050 mm (3/4"), Nut; (B), Nut; (B) 3/4", Nut; 3/4" (Safety Trip), Nut; 3/4" (Hs, Sae 8), Nut; 3/4", (With Roll-Gard), Nut; 3/4" (20'9"-22'2"), Nut; (C: 2-Joint Hookup) 3/4", Nut; (A: ( -Xxxxxx) 4050-00***35; 4250-01***90) 3/4", Nut; 3/4", Bottom Center Holes, (6") Extensions, Nut; 3/4", Front Bolts For Reflectors On R.H. And L.H. Rear Standards, Nut; (E) 3/4", Nut; (F) 3/4", Nut; (A) (B) (D) 3/4", Nut; 3/4" (A), Nut; (A) (B) 3/4", Nut; 3/4" (Sub For (8) T25879, This Application), Nut; (Sub For Ae32488 Or E54521), Nut, Nut; 3/4" (5 X 7 Frame) (7 X 7 Frame - Safety Trip), Nut; 3/4" (5 X 7 Frame) (Safety Trip), Nut; 3/4" (Sub For R27448, This Application), Nut; 3/4", Nut; (C) (D) 3/4", Nut; (B) (C) (D) 3/4", Nut; 3/4", Hs Sae 8, Nut; (B: (1) 13" Extension) 3/4", Nut; 3/4" (37'10"), Nut; 3/4" (Sub For L36551) | 1 |
| 14***93 | Nut; (C) 3/4", Nut; 3/4", Hex Jam, Nut; 3/4", (For 21 Foot Machine), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/4", Nut; 3/4", (Use With N33080), Nut; 0,75", Nut; 3/4" R.H. Thread, Nut; 3/4", (Use With H105936), Nut; 3/4" (B), Nut; (B) 3/4", (Rc), Nut; 19.050 mm, Nut; 3/4", R.H., Nut; 3/4", Jam, Nut; (A) 3/4", Nut; 3/4", (Duplex And Triplex Only), Nut; 3/4", (Illustrated), Nut; (E) 3/4", Nut; 3/4", Nut; 3/4", R.H. Thread, Nut; 3/4", (For 21-Foot Machines), Nut, Nut; 3/4" Right-Hand Thread, Nut; 3/4" (21-Foot), Nut; (B) 3/4", Nut; 3/4" For 21-Foot Machines, Nut; 3/4" Jam, Nut; 3/4", Rear Cap Screw Through Angle, R.H., Nut; 3/4", (21-Foot) | 1 |
| 19***10 | Cap Screw; 15.875 X 44.450 mm (5/8" X 1-3/4"), Cap Screw; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8) Wide Only, Cap Screw; 5/8" X 1-3/4" Rh, Cap Screw; 5/8" X 1-3/4" (Sub For (4) Mg9627896), Cap Screw; 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4" 5/8" X 1 3/4", Cap Screw; 5/8" X 1-3/4" Hs, Sae 8, Cap Screw; 5/8"X1-3/4" (Sub For 19h1833), Cap Screw; 5/8" X 1-3/4" (Sae 8), Cap Screw; 5/8" X 1-3/4" (Use With Ar52584), Cap Screw; 5/8" X 1-3/4", Torque To 175 Lb-Ft (240 N-M), Cap Screw; 5/8" X 1-3/4", Cap Screw; 5/8"X1-3/4", Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8) Narrow Only, Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8), Cap Screw; (A: 9550 ( -69***00) 9550sh ( -69***00)) 5/8" X 1-3/4", Cap Screw; 5/8" X 1-3/4" Install Using Never Sieze On Threads, Torque To 170 Lb-Ft (230 N-M), Cap Screw; 15.875 X 44.450 mm (5/8" X 1-3/4"), Cap Screw; 5/8" X 1-3/4" (Hs, Sae 8) Full Thread, Cap Screw; (B: (Xxxxxx- ) 7710-00***77; 7810-00***09) 5/8" X 1-3/4", Cap Screw; Hs, Sae 8, 5/8" X 1-3/4" | 2 |
Wing Lock-Up Valve (Serial Number 499- ) [C19]
John Deere : 640 - Disk : Wing Lock-Up Valve (Serial Number 499- ) [C19]
| 14***04 | Nut; 3/4" 19.050 mm 3/4 Unf-2b Zn, Nut; 19.050 mm (3/4") (Sub For Na3557), Nut, Nut; 3/4" (Sub 14h902, This Application And 11h237), Nut; 3/4" (Without Hydraulic Wing Control), Nut; 3/4", (Sub For Na3557), Nut; 3/4", For 12n, Nut; 3/4", For Independent Marker, Nut; 3/4", Unf, Jam, Nut; 3/4", Jam, Nut; 3/4", Automatic Marker, Nut; 3/4", Independent Marker, Nut; 3/4", Nut; 3/4" (B), Nut; 3/4", For Automatic Marker, Nut; (A) 3/4", Nut; (A: Without Hydraulic Wing Control) 3/4", Nut; 3/4", Unf, Nut; (A: For 9650 ( -69***00) & 9750 ( -69***00)) 3/4", Nut; 3/4" 3/4 Unf-2b Zn, Nut; 3/4" 3/4", Nut; 3/4", Unf,Jam, Nut; (B: Note; (Tbh Illustrated) (Tbt) -71***05 (Tbh) -71***78) 3/4", Nut; 3/4", For 6w, 8n, 8w, Nut; 3/4", Jam. Unf., Nut; 3/4" Jam, Nut; (B) 3/4", Nut; Without Hydraulic Wing Control, Nut; (A: Note; (Tbt) 71***06- (Tbh) 71***79-) 3/4", Nut; (B) 3/4", Nut; 304", Nut; 3/4" Without Hydraulic Wing Control | 1 |
| AN***06 | Valve; (Sub For Aa14834, This Application), Valve; Needle, Valve; Shut-Off, Valve; (3.5 Turns To Close), Valve; (A), Valve; (3-1/2 Turns To Close), Valve, Valve; Shut Off, Valve; Transport Lockup, Valve; Flow Control | 1 |
| AN***70 | Bracket; (Includes N241244), Bracket | 1 |
Wing Wheel Frame (20'-11") [A20]
John Deere : 640 - Disk : Wing Wheel Frame (20'-11") [A20]
| 14***02 | Nut; (B: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4", Slotted, Fine Thread, Nut; 1/4", Nut; 3/4" 3/4" Slotted, Nut; 3/4" 3/4", Slotted, Nut; 3/4", Unf, Nut; (C: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4'(For Al34936), Nut; 3/4" (Slotted), Nut; 3/4" 2wd, Nut; (A: Slotted) 3/4", Nut; 18mm, Nut; 3/4", (Slotted), Nut; 3/4", (Sub 14h1086), Nut; 3/4" 3/4", Nut; 3/4", Unf., Nut; 5/8", Nut; Slotted, Nut; 3/4" 3/4" Unf, Nut; No. 0.210, Nut; 3/4", Nut; 3/4", (U/W Heavy Duty Dual Axle), Nut; 3/4" Hex Slotted, Nut; (A: 2wd Non-Powered, Rear Axle) 3/4", Nut; 3/4"(For Al34935), Nut; (A), Nut; (A) 3/4", Nut; (A) (B) 3/4", Nut; Rh, Lh, Nut; 19.050 mm (3/4") 3/4", Slotted, Nut; 3/4" (Sub 14h902,This Application And11h237), Nut; 3/4', Slotted, Nut; 5/8", Rh, Lh, Nut; (B: (Regular Duty) Two-Wheel Drive) (C: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/8", Td, Nut; 5/8" Rh, Lh, Nut; (A: (Heavy Duty) Two-Wheel Drive) 3/4", Nut; 3/4" (Use With An232006), Nut; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")) 3/4", Nut; 3/4", Unf, Slotted, Nut; 19.050 mm (3/4"), Nut; 3/4" Slotted, Nut; 3/4" Unf, Nut, Nut; 3/4" Unf, Slotted, Nut; Rh, 5/8", Nut; 19.050 mm (3/4") (Sub 14h1086), Nut; 3/4" (Sub For 14h904, This Application) (Use With 11h237), Nut; 3/4", Slotted, Unf, Nut; 3/4", Slotted, Nut; 3/4" Unf Slotted | 1 |
| AA***59 | Bearing | 2 |
| AN***37 | Frame; Lh (Single Wheel), Frame; Lh (Single Wheel) (Includes Nut) | 1 |
Need a specific 640 - DISK part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.
Post a parts request and compare supplier quotes.