John Deeredisk(no series)

John Deere 620 - DISK

Specifications · OEM parts breakdown

Search live 620 - DISK parts Source or supply its parts

Post a parts request and compare supplier quotes.

John Deere 620 - DISK specifications

Engine

Cylinders	2
Displacement	4965 cc (303.0 cu in.)
Bore	14.00 cm (5.51 in.)
Stroke	16.21 cm (6.38 in.)

Dimensions

Wheelbase

228.0 cm (89.8 in.)

Performance

Rear PTO Speed

540 RPM

Service capacities (summary)

Coolant Capacity	24.6 l (6.5 gal)
Transmission Oil Capacity	22.7 l (6.0 gal)

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

620 - DISK common service parts

Part number	Part	Notes
A38658	Disk	Scheduled service item	Check fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

All 620 - DISK assemblies by section

Every catalogued assembly group for the John Deere 620 - DISK. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Decals

John Deere : 620 - Disk : Decals

AN***57	Sign; (Sub For Aa32089) Model Designation (Integral Disks)	1
AN***58	Sign; (Sub For Aa32090)"970 - Designation", Sign; (Sub For Aa32090) Model Designation (Drawn Disks), Sign; (50 mm) (Sub For Aa32090) Model Designation Repair Kit, Sign; Model Repair Kit	2
AN***59	Decal Kit; (Sub For Aa32091) Model Number Repair, Decal Kit; Model Designation Repair Kit, Decal Kit, Decal Kit; (Sub For Aa32091) Model Repair Number, Decal Kit; Model Number Repair, Decal Kit; (Sub For Aa32091)Model Designation Repair Kit, Decal Kit; (Sub For Aa32091) Model Designation Repair Kit, Decal Kit; (Sub For Aa32091)Model Number Repair, Decal Kit; (Sub For Aa32091)Model Number Repair Kit (75 mm), Decal Kit; Model Number Repair, (Sub For Aa32091), Decal Kit; Kit, Model Number Repair, (Sub For Aa32091), Decal Kit; (Sub For Aa32091) Kit, Model Number Repair, Decal Kit; Model Designation Repair Kit, (Sub For N260646 Or Aa32091), Decal Kit; Kit, Model Number Repair, Decal Kit; Model Number Repair Kit (Sub For Aa32091)	1
JD***95	Label; (A: "Leaping Deer"; Located On Cart Frame Near The Caster Wheel), Label; "Leaping Deer" Located On Right Side Of Mast, Label; "Leaping Deer" - Located On Both Sides Of Hitch Tongue, Label; "Leaping Deer", Label; Leeping Deer, Label; (Sub Jd5712) Leaping Deere 76 mm (3"), Label; "Leaping Deer"; Located On Cart Frame Near The Caster Wheel, Label; Leaping Deere 70 mm, Label, Label; (For Early Gear Case Without Leaping Deer Logo Embossed In Casting), Label; (Sub Jd5712)Leaping Deere (70 mm), Label; Leaping Deere (L.H. Side Of Tube), Label; Leaping Deer (For 102 X 102 mm (4" X 4") Frame), Label; Leaping Deer, Label; (Sub Jd5712) Leaping Deer, Label; (Sub Jd5912), Label; "Leaping Deer" - Rear Of Main Frame., Label; (3") Leaping Deere, Label; (Leaping Deer), Label; Leaping Deer (On Plow), Label; Leaping Deer 70 mm, Label; (Sub Jd5712)Leaping Deer 70 mm, Label; "Leaping Deer" - R.H. And L.H. Side Of Two Bottom Hitch, Label; "Leaping Deer" - Located On Vegetable Seed Hopper And 41a Hydraulic Marker, Label; (Sub Jd5712)Leaping Deer	1

See all parts with full part numbers in Heavy Parts AI →

Furrow Filler Spool And Disk (For Integral Disks)

John Deere : 620 - Disk : Furrow Filler Spool And Disk (For Integral Disks)

03***28	Bolt; 3/4" X 3-3/4"	1
03***67	Bolt; 7/8" X 2-1/2"	1
A1***67	Washer; 23.012 X 50.800 X 6 mm, Washer, Washer; (A), Washer; 29/32" X 2" X 0.236"	1
A2***19	Clamp	1

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Front (For 2.7 M (8';11") Drawn Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Front (For 2.7 M (8';11") Drawn Disks) 185 Mm (7-1/4") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	8
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	12
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Front (For 2.8 M (9';2") And 3.2 M (10';7") Drawn Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Front (For 2.8 M (9';2") And 3.2 M (10';7") Drawn Disks) 230 Mm (9") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	8
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	12
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Front (For 3.0 M (10';0"), 3.4 M (11';2") And 3.7 M (12';4") Drawn Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Front (For 3.0 M (10';0"), 3.4 M (11';2") And 3.7 M (12';4") Drawn Disks) 185 Mm (7-1/4") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	12
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	6
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	18
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Front (For 3.6 M (12';0") And 4.0 M (13';5") Drawn Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Front (For 3.6 M (12';0") And 4.0 M (13';5") Drawn Disks) 230 Mm (9") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	12
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	6
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	18
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Front (For Integral Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Front (For Integral Disks) 185 Mm (7-1/4") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	8
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	12
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Front (For Integral Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Front (For Integral Disks) 230 Mm (9") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	8
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	12
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Rear (For 2.7 M (8';11") And 3.0 M (10';0") Drawn Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Rear (For 2.7 M (8';11") And 3.0 M (10';0") Drawn Disks) 185 Mm (7-1/4") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	8
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	12
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Rear (For 2.8 M (9';2"), 3.2 M (10';7") And 3.6 M (12';0") Drawn Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Rear (For 2.8 M (9';2"), 3.2 M (10';7") And 3.6 M (12';0") Drawn Disks) 230 Mm (9") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	8
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	12
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Rear (For 3.4 M (11';2") And 3.7 M (12';4") Drawn Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Rear (For 3.4 M (11';2") And 3.7 M (12';4") Drawn Disks) 185 Mm (7-1/4") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	12
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	6
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	18
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Rear (For 4.0 M (13';5") Drawn Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Rear (For 4.0 M (13';5") Drawn Disks) 230 Mm (9") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	12
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	6
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	18
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Rear (For Integral Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Rear (For Integral Disks) 185 Mm (7-1/4") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	8
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	12
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Bolts And Disks, Rear (For Integral Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Gang Bolts And Disks, Rear (For Integral Disks) 230 Mm (9") Spacing

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	8
03***65	Bolt; 3/8" X 3/4", (3 Used, 130; 7 Used, 135), Bolt; 3/8" X 3/4", (653a, 654a, 655a And 853a), Bolt; 3/8" X 3/4", (2 Used, 347; 4 Used, 467), Bolt; 3/8" X 3/4" (913), Bolt; 3/8" X 3/4", (3 Used, 3950) (2 Used, 3970), Bolt; 3/8"X3/4" (Sub For 03m1075), Bolt; 3/8"X5/8", Bolt; (A: For Frame Tube) 3/8" X 3/4" 7" X 7", Bolt; 3/8" X 3/4", (344 - 3 Used; 443, 444, 543, 546, 642, 643, 644, 645, 842 & 843 - 6 Used), Bolt; 3/8" X 3/4" (Sub For (8) Mg88639), Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 3/4", (Twin Swath), Bolt; 3/8" X 3/4", Bolt; 3/8x3/4, Bolt; 3/8" X 3/4" (A), Bolt; 3/8" X 3/4", (Less Iron-Gard), Bolt; 3/8" X 3/4", (French Only), Bolt; 3/8x3/4", Bolt; 3/8" X 3/4", L.H. Armrest Latch Plate, Bolt; 3/8" X 3/4", (6 Used, Each Additional Tooth Bar), Bolt; 3/8" X 3/4", For 15'3" Harrow, Bolt; (A) (B) 3/8" X 3/4", Bolt; 3/8" X 3/4" (913-10 Used; 915-12 Used; 918-14 Used; 920, 922, 924 And 925-16 Used; 930-22 Used), Bolt; Cge., 3/8" X 3/4", Bolt; 3/8" X 3/4" (918, 920, 922, 924, 925 And 930 Rigid) (Use With H129024), Bolt; 3/8" X 3/4" (Sub For 03h2117), Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076), Bolt; 3/8" X 3/4", (Use With 14h1076), Bolt; 3/8" X 3/4" Lh Armrest Latch Plate, Bolt; 3/8" X 3/4", (Use With 12h304 And 14h1076) (55 Used For 122; 81 Used For 125), Bolt; Rd. Hd., 3/8" X 3/4", Bolt; 3/8" X 3/4" (213, 215, 216-3 Used; 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; X 3/8" X 3/4" (Sub For 19h1936), Bolt; 3/8"X3/4", Bolt; 3/8" X 3/4", (6 Used On 280) (5 Used On 282), Bolt; 3/8" X 3/4" (913, 915, -3 Used; 918-5 Used; 920, 922, 924, 925 And 930-8 Used), Bolt; 3/8" X 3/4" (213 And 215-3 Used; 216 And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4", For 12' Harrow, Bolt; 3/8" X 3/4", (Use With 14h1076 And 12h304), Bolt; 3/8" X 3/4" Attach Hose To Middle Of Shield, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,62*64-; 1253a,6212-), Bolt; 3/8" X 3/4" (914), Bolt; 3/8" X 3/4" (Use With N10215), Bolt; 3/8" X 3/4", 6 Used, 3.7m (12 Ft); 8 Used, 4.3m (14 Ft) & 5.0m (16 Ft), Bolt; 3/8" X 3/4", (25 Used, 3940) (24 Used, 3960), Bolt; 3/8" X 3/4", (214), Bolt; (B: W/O Intelliguard) 3/8" X 3/4", Bolt; (C) 3/8"X3/4", Bolt; 3/8" X 3/4" Lh, Bolt; 9.525 X 19.050 mm (3/8" X 3/4") (854a,-6263; 1253a,-62*11), Bolt; 3/8" X 3/4", 6 Used Per Reel Bat, 3.7 M (12-Ft.) 8 Used Per Reel Bat, 4.3 M (14-Ft.) And 5.0 M (16-Ft.), Bolt; 3/8" X 3/4", With Single And Double Auger, Bolt; 3/8" X 3/4" (Use With T13744), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7m (12-Ft.) (8 Used Per Reel Bat, 4.3m (14-Ft.) And 4.9m (16-Ft.), Bolt; 3/8" X 3/8", Bolt; 3/8" X 3/4" (Use With 14h812), Bolt; 3/8" X 3/4" (213-10 Used; 215 And 216-12 Used; 218-14 Used; 220, 222, And 224-16 Used; 230-22 Used), Bolt; 3/8" X 3/4" (218, 220, 222, 224 And 230 Rigid) (Use With H95175), Bolt; 3/8" X 3/4" (Sub For Mg86508748), Bolt; 3/8" X 3/4", Unc, Bolt; 3/8" X 3/4", (Ru), Bolt; (A) 3/8" X 3/4", Bolt; 3/8" X 3/4", (Per Reel Bat), Bolt; 3/8" X 3/4", (244, 344, 444, 546, 644, And 645), Bolt; (C) 3/8" X 3/4", Bolt, Bolt; 9.525 X 19.050 mm (3/8" X 3/4"), Bolt; 3/8" X 3/4" (213, 215, 216, And 218-5 Used; 220, 222, 224, And 230-8 Used), Bolt; 3/8" X 3/4" (Use With 12h304 And 14h812), Bolt; (B) 3/8" X 3/4", Bolt; 3/8" X 3/4", For 10' Harrow, Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.) And 4.9 M (16-Ft.), Bolt; 3/8" X 3/4", (6 Used Per Reel Bat, 3.7 M (12-Ft.) (8 Used Per Reel Bat, 4.3 M (14-Ft.), Bolt; (A) 3/8"X3/4", Bolt; 3/8" X 3/4", (454a), Bolt; 3/8" X 3/4", (Use With An202125), Bolt; 3/8" X 3/4" (Flexible)	4
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	12
24***38	Washer; 1-1/16" X 2" X 0.134" (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X .134", Washer; 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 36' (10.9m), Washer; 1-1/16" X 2" X 0.134", For 760 And 790, Washer; 26.975 X 50.800 X 3.404 mm (1-1/16" X 2" X 0.134"), Washer; 1-1/16" X 2" X 0.134" Metallic, Round Hole, Washer; 1-1/16" X 2" X 0.134", 2 0r Less, Washer; 1-1/16" X 2" X 0.134" 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End, Washer; (B) 1-1/16" X 2" X 0.134", Washer; 1-1/16" X 2" X 0.134", 2 Outboard Each Side Of Cylinder End And 8 Inboard Each Side Between Frame And Cylinder End	2

See all parts with full part numbers in Heavy Parts AI →

Gang Frame And Standard (For Integral Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Gang Frame And Standard (For Integral Disks) 230 Mm (9") Spacing

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	16
19***28	Cap Screw; 5/8" X 4" 18'9" And 21'9", Cap Screw; 5/8" X 4", Cap Screw; 5/8"X4", Cap Screw; (R) 5/8" X 4", Cap Screw; 15.875 X 101.600 mm (5/8" X 4") Used Where Light Bracket Attaches, Cap Screw; (B) 5/8" X 4", Cap Screw; 5/8" X 4", (16 X 6 Disk) (8 X 12, 10 X 10 And 7 X 14 Hoe), Cap Screw; (D) 5/8" X 4", Cap Screw; 5/8" X 4" Use With 6" Spacing On S-Tine Models, Cap Screw; (B) 5/8" X 4", (Rear Flange To Flywheel Housing), Cap Screw; 5/8" X 4", (Rigid Models Only), Cap Screw; 5/8" X 4", Upper And Lower Holes (For 6359t Engine), Cap Screw; 5/8"X4, Cap Screw; (B) (C) (D) 5/8" X 4", Cap Screw; 5/8" X 4", (With Markers), Cap Screw; 5/8" X 4", No. 4 Grab Roll, Cap Screw; (B), Cap Screw; (A) 5/8" X 4", Cap Screw; (C) 5/8" X 4", Cap Screw; 5/8" X 4" Main Frame Front, Cap Screw; 5/8" X 4" (For Rigid Models Only), Cap Screw; 5/8"X4" W/Dual-Stage Clutch, Cap Screw; 5/8" X 4" (15'9"), Cap Screw; 5/8" X 4" (A), Cap Screw; 5/8" X 4", (7 X 14 Hoe)	16
A3***04	Structural Tubing; 868 mm (34.173") For 2.0 M (6'7") Size, Structural Tubing; (A) (C) 868 mm (34-11/16"), Structural Tubing; (A) (C) 868 mm (34-11/64"), Structural Tubing; 868 mm (34.173") For 1.9 M (6'3") Size	4
A3***59	Structural Tubing; (A) (B) 1 258 mm (49-33/64"), Structural Tubing; 1253 mm (49.331") For 2.8 M (9'2") Size, Structural Tubing; (A) (B) 1258 mm (49-33/64"), Structural Tubing; 1253 mm (49.331") For 2.7 M (8'11") Size	4

See all parts with full part numbers in Heavy Parts AI →

Gang Frame And Standard For Integral Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Gang Frame And Standard For Integral Disks) 185 Mm (7-1/4") Spacing

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	16
19***28	Cap Screw; 5/8" X 4" 18'9" And 21'9", Cap Screw; 5/8" X 4", Cap Screw; 5/8"X4", Cap Screw; (R) 5/8" X 4", Cap Screw; 15.875 X 101.600 mm (5/8" X 4") Used Where Light Bracket Attaches, Cap Screw; (B) 5/8" X 4", Cap Screw; 5/8" X 4", (16 X 6 Disk) (8 X 12, 10 X 10 And 7 X 14 Hoe), Cap Screw; (D) 5/8" X 4", Cap Screw; 5/8" X 4" Use With 6" Spacing On S-Tine Models, Cap Screw; (B) 5/8" X 4", (Rear Flange To Flywheel Housing), Cap Screw; 5/8" X 4", (Rigid Models Only), Cap Screw; 5/8" X 4", Upper And Lower Holes (For 6359t Engine), Cap Screw; 5/8"X4, Cap Screw; (B) (C) (D) 5/8" X 4", Cap Screw; 5/8" X 4", (With Markers), Cap Screw; 5/8" X 4", No. 4 Grab Roll, Cap Screw; (B), Cap Screw; (A) 5/8" X 4", Cap Screw; (C) 5/8" X 4", Cap Screw; 5/8" X 4" Main Frame Front, Cap Screw; 5/8" X 4" (For Rigid Models Only), Cap Screw; 5/8"X4" W/Dual-Stage Clutch, Cap Screw; 5/8" X 4" (15'9"), Cap Screw; 5/8" X 4" (A), Cap Screw; 5/8" X 4", (7 X 14 Hoe)	16
A3***04	Structural Tubing; 868 mm (34.173") For 2.0 M (6'7") Size, Structural Tubing; (A) (C) 868 mm (34-11/16"), Structural Tubing; (A) (C) 868 mm (34-11/64"), Structural Tubing; 868 mm (34.173") For 1.9 M (6'3") Size	4
A3***59	Structural Tubing; (A) (B) 1 258 mm (49-33/64"), Structural Tubing; 1253 mm (49.331") For 2.8 M (9'2") Size, Structural Tubing; (A) (B) 1258 mm (49-33/64"), Structural Tubing; 1253 mm (49.331") For 2.7 M (8'11") Size	4

See all parts with full part numbers in Heavy Parts AI →

Gang Frame And Standard, Front (For Drawn Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Gang Frame And Standard, Front (For Drawn Disks) 185 Mm (7-1/4") Spacing

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	12
19***76	Cap Screw; 5/8" X 5", (750), Cap Screw; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8" X 5", Cap Screw; (B) (C) (D) 5/8" X 5", Cap Screw; (C) (D) 5/8" X 5", Cap Screw; (A) 5/8" X 5", Cap Screw; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8" X 5", Cap Screw; 5/8" X 5", (Use Without N138383), Cap Screw; (D) 5/8" X 5", Cap Screw; (D: For 4.0 M (13'5") Size) 5/8" X 5", Cap Screw; 5/8" X 5" 33'9" And 38'3", Cap Screw; 5/8" X 5" 24'9", Cap Screw; 5/8" X 5" (Used On L.H. Side), Cap Screw; 5/8" X 5" 7std And 9 Std Rigid, Cap Screw; 5/8" X 5" (27'9" Through 38'3"), Cap Screw; 5/8" X 5", Cap Screw; 15.875 X 127 mm (5/8" X 5"), Cap Screw; 5/8" X 5" (Hs, Sae 8), Cap Screw; 5/8" X 5" 18'9" Through 24'9" Rear Hinge, Cap Screw; 5/8" X 5", (700), Cap Screw; 5/8" X 5", (Except 770), Cap Screw; 5/8" X 5", (10 X 12 Hoe), Cap Screw; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8" X 5", Cap Screw; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8" X 5", Cap Screw; (A) (B) 5/8" X 5", Cap Screw; (A) (B) (C) 5/8" X 5", Cap Screw; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8" X 5", Cap Screw; 5/8" X 5" 27' And 30", Cap Screw; 5/8" X 5" Narrow (Illustrated)	8
AN***75	Structural Tubing; (C: For 3.4 M (11'2") Size) 1 633 mm (64-9/32"), Structural Tubing; (C) 1 633 mm (64-9/32")	2
AN***76	Structural Tubing; (C) 1 819 mm (71-19/32"), Structural Tubing; (D: For 3.7 M (12'4") Size) 1 819 mm (71-19/32"), Structural Tubing; (C: For 3.6 M (12'0") Size) 1 819 mm (71-19/32"), Structural Tubing; (D) 1 819 mm (71-19/32")	2

See all parts with full part numbers in Heavy Parts AI →

Gang Frame And Standard, Front (For Drawn Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Gang Frame And Standard, Front (For Drawn Disks) 230 Mm (9") Spacing

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	12
19***76	Cap Screw; 5/8" X 5", (750), Cap Screw; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8" X 5", Cap Screw; (B) (C) (D) 5/8" X 5", Cap Screw; (C) (D) 5/8" X 5", Cap Screw; (A) 5/8" X 5", Cap Screw; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8" X 5", Cap Screw; 5/8" X 5", (Use Without N138383), Cap Screw; (D) 5/8" X 5", Cap Screw; (D: For 4.0 M (13'5") Size) 5/8" X 5", Cap Screw; 5/8" X 5" 33'9" And 38'3", Cap Screw; 5/8" X 5" 24'9", Cap Screw; 5/8" X 5" (Used On L.H. Side), Cap Screw; 5/8" X 5" 7std And 9 Std Rigid, Cap Screw; 5/8" X 5" (27'9" Through 38'3"), Cap Screw; 5/8" X 5", Cap Screw; 15.875 X 127 mm (5/8" X 5"), Cap Screw; 5/8" X 5" (Hs, Sae 8), Cap Screw; 5/8" X 5" 18'9" Through 24'9" Rear Hinge, Cap Screw; 5/8" X 5", (700), Cap Screw; 5/8" X 5", (Except 770), Cap Screw; 5/8" X 5", (10 X 12 Hoe), Cap Screw; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8" X 5", Cap Screw; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8" X 5", Cap Screw; (A) (B) 5/8" X 5", Cap Screw; (A) (B) (C) 5/8" X 5", Cap Screw; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8" X 5", Cap Screw; 5/8" X 5" 27' And 30", Cap Screw; 5/8" X 5" Narrow (Illustrated)	8
AN***76	Structural Tubing; (C) 1 819 mm (71-19/32"), Structural Tubing; (D: For 3.7 M (12'4") Size) 1 819 mm (71-19/32"), Structural Tubing; (C: For 3.6 M (12'0") Size) 1 819 mm (71-19/32"), Structural Tubing; (D) 1 819 mm (71-19/32")	2
AN***77	Structural Tubing; (A) 1 300 mm (51-3/16"), Structural Tubing; (A: For 2.8 M (9'2") Size) 1 300 mm (51-3/16"), Structural Tubing; (A: For 2.7 M (8'11") Size) 1 300 mm (51-3/16")	2

See all parts with full part numbers in Heavy Parts AI →

Gang Frame And Standard, Rear (For Drawn Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Gang Frame And Standard, Rear (For Drawn Disks) 185 Mm (7-1/4") Spacing

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	12
19***76	Cap Screw; 5/8" X 5", (750), Cap Screw; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8" X 5", Cap Screw; (B) (C) (D) 5/8" X 5", Cap Screw; (C) (D) 5/8" X 5", Cap Screw; (A) 5/8" X 5", Cap Screw; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8" X 5", Cap Screw; 5/8" X 5", (Use Without N138383), Cap Screw; (D) 5/8" X 5", Cap Screw; (D: For 4.0 M (13'5") Size) 5/8" X 5", Cap Screw; 5/8" X 5" 33'9" And 38'3", Cap Screw; 5/8" X 5" 24'9", Cap Screw; 5/8" X 5" (Used On L.H. Side), Cap Screw; 5/8" X 5" 7std And 9 Std Rigid, Cap Screw; 5/8" X 5" (27'9" Through 38'3"), Cap Screw; 5/8" X 5", Cap Screw; 15.875 X 127 mm (5/8" X 5"), Cap Screw; 5/8" X 5" (Hs, Sae 8), Cap Screw; 5/8" X 5" 18'9" Through 24'9" Rear Hinge, Cap Screw; 5/8" X 5", (700), Cap Screw; 5/8" X 5", (Except 770), Cap Screw; 5/8" X 5", (10 X 12 Hoe), Cap Screw; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8" X 5", Cap Screw; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8" X 5", Cap Screw; (A) (B) 5/8" X 5", Cap Screw; (A) (B) (C) 5/8" X 5", Cap Screw; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8" X 5", Cap Screw; 5/8" X 5" 27' And 30", Cap Screw; 5/8" X 5" Narrow (Illustrated)	12
N1***74	Structural Tubing; (C: For 3.4 M (11'2") Size) 1511.300 mm (59-1/2"), Structural Tubing; (C) 1 511.300 mm (59-1/2")	2
N1***77	Structural Tubing; (B: For 3.0 M (10'0") Size) 1422.400 mm (56"), Structural Tubing; (B) 1 422.400 mm (56"), Structural Tubing; (B: For 3.2 M (10'7") Size) 1422.400 mm (56")	2

See all parts with full part numbers in Heavy Parts AI →

Gang Frame And Standard, Rear (For Drawn Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Gang Frame And Standard, Rear (For Drawn Disks) 230 Mm (9") Spacing

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	12
19***76	Cap Screw; 5/8" X 5", (750), Cap Screw; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8" X 5", Cap Screw; (B) (C) (D) 5/8" X 5", Cap Screw; (C) (D) 5/8" X 5", Cap Screw; (A) 5/8" X 5", Cap Screw; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8" X 5", Cap Screw; 5/8" X 5", (Use Without N138383), Cap Screw; (D) 5/8" X 5", Cap Screw; (D: For 4.0 M (13'5") Size) 5/8" X 5", Cap Screw; 5/8" X 5" 33'9" And 38'3", Cap Screw; 5/8" X 5" 24'9", Cap Screw; 5/8" X 5" (Used On L.H. Side), Cap Screw; 5/8" X 5" 7std And 9 Std Rigid, Cap Screw; 5/8" X 5" (27'9" Through 38'3"), Cap Screw; 5/8" X 5", Cap Screw; 15.875 X 127 mm (5/8" X 5"), Cap Screw; 5/8" X 5" (Hs, Sae 8), Cap Screw; 5/8" X 5" 18'9" Through 24'9" Rear Hinge, Cap Screw; 5/8" X 5", (700), Cap Screw; 5/8" X 5", (Except 770), Cap Screw; 5/8" X 5", (10 X 12 Hoe), Cap Screw; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8" X 5", Cap Screw; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8" X 5", Cap Screw; (A) (B) 5/8" X 5", Cap Screw; (A) (B) (C) 5/8" X 5", Cap Screw; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8" X 5", Cap Screw; 5/8" X 5" 27' And 30", Cap Screw; 5/8" X 5" Narrow (Illustrated)	12
N1***78	Structural Tubing; (D: For 4.0 M (13'5") Size) 1879.600 mm (74"), Structural Tubing; (D) 1 879.600 mm (74")	2
N1***77	Structural Tubing; (B: For 3.0 M (10'0") Size) 1422.400 mm (56"), Structural Tubing; (B) 1 422.400 mm (56"), Structural Tubing; (B: For 3.2 M (10'7") Size) 1422.400 mm (56")	2

See all parts with full part numbers in Heavy Parts AI →

Hose Support (1265 - )

John Deere : 620 - Disk : Hose Support (1265 - )

14***26	Nut; 1/2" (Sub For R79187, Appl), Nut; 1/2", R.H. Thread, Nut; 1/2" Rh Thread, Nut; 1/2", (Sub For Mg84970), Nut; 1/2", (Use In Place Of 14h1040 When Using A24112 Or A37548), Nut; 1/2" (2 Used, Regular; 4 Used, Special), Nut; 1/2" (Use With 12h301), Nut; 12.700 mm (1/2") 1/2"-13unc, Nut; 1/2" 1/2"-13unc (Sub For R79187), Nut; 12.700 mm, Nut; 1/2", (Code 4001), Nut; 1/2" R.H., Long Tooth Pickup, Nut; 1/2" (Sub For R79187), Nut; 1/2" (Mega), Nut; 1/2" 1/2"-13unc (Sub R79187), Nut; 1/2" 1/2" (Sub For 14h346), Nut; 1/2" Sub For 14h346, Nut; 1/2", Use In Place Of 14h1040 When Using A24112 Holder, Nut; 1/2", Jam (Use With 18 Degree Adapter), Nut; 1/2" (Long Auger), Nut; 1/2" R.H., Nut; 1/2" (Use With Ah89402), Nut; (A) (B) 1/2", Nut; 1/2", 1/2", Nut; (A: For Engine (Cd6068hz001)) 1/2" (1/2"-13unc), Nut; 1/2", (Sub For R79187, Appl), Nut; 1/2" 1/2"-13 Unc, Nut; 1/2", Nut; 1/2" -13unc, Nut; (A: Kit Listed Below Consists Of All Parts Identified By An (A):) 1/2", Nut; 1/2", Heavy Duty, Nut; 1/2"-13unc, (Sub R79187), Nut; 1/2" (3 Used, Regular; 5 Used, Special), Nut; 1/2" (Sub For R79187, This Application), Nut; 1/2"-13unc, Nut; 1/2" Without Mechanical Front Wheel Drive, Nut; 1/2", (Sub For R79187, This Application), Nut; 1/2", Unf., Nut; 1/2", (Mega), Nut; 1/2", Nut, Nut; 1/2", Jam, Nut; 1/2", (Use With An151355), Nut; 1/2" Jam, Nut; 1/2", 10 Hitch, Nut; 1/2", (Sub For R79187), Nut; (B: R.H. Thread) 1/2", Nut; 1/2" (A), Nut; 1/2" 1/2"-13unc, Nut; (A) 1/2"	4
19***33	Cap Screw; 3/8" X 2-1/2", (2 Used Power Shift) (4 Used Syncro-Range), Cap Screw; 3/8" X 2-1/2", Codes 2101 And 2103, Cap Screw; 3/8" X 2-1/2" (11'5" - 15'0"), Cap Screw; 3/8"X2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With R100676 Only), Cap Screw; 3/8" X 2-1/2", (Sub For Gf24615) For 760, Cap Screw; 3/8" X 2-1/2", (Use With R82180) Code 2501 And 2503, Cap Screw; (B: (Xxxxxx- ) 4650-00*66; 4850-0002 (Pst)) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", (Use With R90331) Code 2311(Tf), Cap Screw; 3/8" X 2-1/2", (Ru), Cap Screw; (B) 3/8" X 2-1/2", (Rear Outside Corners), Cap Screw; 3/8" X 2-1/2" (Use With N10215), Cap Screw; 9.525 X 63.500 mm, Cap Screw; 3/8" X 2-1/2", (Use With R90561) Code 2311(Af, Af001), Cap Screw; (A: W/O Sound-Gard Body) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" Lh, Cap Screw; 3/8" X 2-1/2" (Use With 12h304 And 14h812), Bolt, Cap Screw; 3/8" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/8"X2-1/2", Cap Screw; 3/8" X 2-1/2" 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2" (Use Without Spacer), Cap Screw; 3/8" X 2-1/2", Hex Head, Cap Screw; 3/8"X2 1/2", Cap Screw; 3/8" X 2-1/2", (Ha-G, Ha-L, Hb-G, Hb-L, Hc-G, Hd-G), Cap Screw; 3/8" X 2-1/2", (Use With R82180), Cap Screw, Cap Screw; 3/8" X 2-1/2", (Use With Ar91662), Cap Screw; 3/8" X 2-1/2" (Use With Re30685), Cap Screw; (B: ( -Xxxxxx) 4250-0095; 4450-01*85) 3/8" X 2-1/2" (Sgb), Cap Screw; 3/8" X 2-1/2", Code 2101 And 2103, Cap Screw; 3/8"X2-1/2"(Ou), Cap Screw; 3/8" X 2-1/2", (Use With Re30685), Cap Screw; 3/8" X 2-1/2", (Use With R100676 Or R82180 And R90561), Cap Screw; 3/8" X 2-1/2", (Use With Ah127730), Cap Screw; 3/8" X 2-1/2" (Use With 14h812), Cap Screw; (A: W/O Sgb) 3/8" X 2-1/2", Cap Screw; (B) 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", Cap Screw; 3/8" X 2-1/2", Used On Beet Planter, Cap Screw; 9.525 X 63.500 mm (3/8" X 2-1/2"), Cap Screw; 3/8" X 2-1/2", Code 2107 And 2108, Cap Screw; (A) 3/8" X 2-1/2", Cap Screw; 3/8"X2-1/2" Unc, Cap Screw; 3/8"X2-1/2" (Sub For 19h268 Appl), Cap Screw; 3/8"X2-1/8" Unc, Cap Screw; 3/8"X2-1/2" (Ou), Cap Screw; 3/8" X 2-1/2", Code 2314 (Af Only) (Fan To R82180), Cap Screw; 3/8"X2-1/2"Unc	2
K4***03	Lock Nut; (Sub For W13579) 3/8", Lock Nut; (B: (Xxxxxx- )4755-01*04;4955-0125), Lock Nut; 9.525 mm (3/8") (Sub For W13579), Lock Nut; (Also Order 24h1136) (Sub For R53670, This Application), Lock Nut; 3/8" (With Level Lift Hitch), Lock Nut; Narrow, Lock Nut; (Use With 19h2128), Lock Nut; (B) 3/8", Lock Nut; (A) 3/8", (Sub For W13579), Lock Nut; (C) 3/8", Lock Nut; (Sub For R189280, This Application), Lock Nut; (A: For 2.8 M (9'2") Size) 9.525 mm (3/8"), Lock Nut; (C: For 3.6 M (12'0") Size) 9.525 mm (3/8"), Lock Nut; (Use With Re162261), Lock Nut; (B: Amber Warning Light Assembly) 9.525 mm, Lock Nut; 9.525 mm (3/8") (Sub For R53670), Lock Nut; (Sub For R41564, This Application), Lock Nut; (Sub For R41564), Lock Nut; (A), Lock Nut; (A) (Sub For E50102), Lock Nut; 9.525 mm (3/8") 3/8", Lock Nut; 3/8", (3.7 M (12-Ft.) Platform, 9 Used) (4.3 M (14-Ft.) Platform, 12 Used) (Sub For W13579), Lock Nut; 3/8", (Sub For W13579), Lock Nut; (Also Order 24h1136), Lock Nut; 9.525 mm (With Level Lift Hitch), Lock Nut; (C: Part Of Ar109180 Adjustable Front Axle), Lock Nut; (B: For 3.0 M (10'0") Size) 9.525 mm (3/8"), Lock Nut; (Also Order 24h1136) (Sub For R53668, This Application), Lock Nut; 9.525 mm (Folding), Lock Nut; (D: For 3.7 M (12'4") Size) 9.525 mm (3/8"), Lock Nut; (D: For 4.0 M (13'5") Size) 9.525 mm (3/8"), Lock Nut; (A: Red Warning Light Assembly) 9.525 mm, Lock Nut; (Sub For W13579), Lock Nut; (6 Used Twin Swath), Lock Nut; (B: (Xxxxxx- )4560-0028;4760-0051;4960-00**55), Lock Nut; (C: For 3.4 M (11'2") Size) 9.525 mm (3/8"), Lock Nut; (Sub For R189280), Lock Nut; (Sub For U13184 And W13579), Lock Nut; 3/8", (Sub For R41564), Lock Nut; 9.525 mm (3/8"), Lock Nut; 3/8", (Use With N260835), Lock Nut, Lock Nut; 3/8", (Sub For E50302), Lock Nut; (D) 3/8", Lock Nut; (A: For 2.7 M (8'11") Size) 9.525 mm (3/8"), Lock Nut; (A: Separate Fertilizer Placement), Lock Nut; Use With A88788, Lock Nut; (B: For 3.2 M (10'7") Size) 9.525 mm (3/8"), Lock Nut; (A) (B) (C) 3/8", Lock Nut; (Also Order 24h1136) (Sub R53670), Lock Nut; (Twin Swath), Lock Nut; 3/8", R.H., Lock Nut; (Use With O.And S.), Lock Nut; 3/8", (Use With Aa22080, Aa22081 And Aa24267), Lock Nut; (A) 9.525 mm (3/8"), Lock Nut; 3/8", (Europe), Lock Nut; Sp, Lock Nut; (A) 3/8", Lock Nut; 3/8", Lock Nut; 3/8", (Sub For R53670), Lock Nut; (Use With Aa22080), Lock Nut; 9.525 mm, Lock Nut; 9.525 mm (Europe), Lock Nut; 3/8", (Also Order 24h1136)	2
N2***78	Plate; Hose Storage, Plate, Plate; Hose Support, Plate; (Lh Side Only)	1

See all parts with full part numbers in Heavy Parts AI →

Hitch (For Drawn Disks)

John Deere : 620 - Disk : Hitch (For Drawn Disks)

14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
19***81	Cap Screw; 1/2" X 2-1/2", Cap Screw; (B) (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (For T28025), Cap Screw; 1/2" X 3-1/2" (Use With 14h1040 And 12h301), Cap Screw; 1/2" X 3-1/2", (If Machine Is Equipped With Auxiliary Hydraulic System), Cap Screw; (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Sub For 19h1945), Cap Screw; (B) (D) 1/2" X 3-1/2", Cap Screw; (C) (D) 1/2" X 3-1/2", Cap Screw; (A) 1/2" X 3-1/2", Cap Screw; 1/2"X3-1/2", Cap Screw; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2" X 3-1/2", Cap Screw; (E) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", Use With Key 3 Only, Cap Screw; 1/2" X 3-1/2" (A), Cap Screw; (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With A21163 Or A21164), Cap Screw; (A) (B) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (Use With Light Bracket On Integral And Drawn Flexible Models), Cap Screw; 1/2" X 3-1/2", (4 Used On R.H. And L.H. Outside Of Machine), Cap Screw; 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheels), Cap Screw; (C) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", (Use With Rigid Gauge Wheel), Cap Screw; (F) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2" (A) (B), Cap Screw; 1/2" X 3-1/2", Rear Hinge, Cap Screw; 1/2" X 3-1/2", Center Hinge, Cap Screw; 1/2" X 3-1/2" (Rh), Cap Screw; (B) (C) (D) 1/2" X 3-1/2", Cap Screw; 1/2" X 3-1/2", R.H., Cap Screw; 1/2"X3-1/2" Unc, Cap Screw; 1/2" X 3-1/2", (Sub For Mg88273), Cap Screw; 1/2" X 3-1/2", (Front Hinge), Cap Screw; (B) 1/2" X 3-1/2", When Clips Are Used, Cap Screw; 1/2"X3-1/2" (For T28025)	2
19***25	Cap Screw; 3/4" X 6-1/2", Hex. Hd., Cap Screw; (D) 3/4" X 6-1/2", (Sub For R53020) (Also Order 14h1058), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8) (12'-2" Through 15'-0"), Cap Screw; 3/4" X 6-1/2" (5 X 7 Frame), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8) (12'2" Through 15'0"), Cap Screw; 3/4" X 6-1/2", Hs, Sae 8, Cap Screw; 19.050 X 165.100 mm (3/4" X 6-1/2") (Hs, Sae 8), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8), Cap Screw; (D) 3/4" X 6-1/2", (Sub For R53020), Cap Screw; 3/4" X 6-1/2", (Sub For R53020), Cap Screw; 3/4" X 6-1/2" (Hs, Sae 8) Wide Axle, (Sub For R53020), Cap Screw; 3/4" X 6-1/2" Hs=10.9, Sae 8, Cap Screw; (Sub For R53020), Cap Screw; (C) 3/4" X 6-1/2", (Sub For R53020), Cap Screw; 3/4" X 6-1/2" (For 5 X 7 Frame), Cap Screw; 3/4"X6-1/2", Cap Screw; 19.050 X 165.100 mm (3/4" X 6-1/2"), Cap Screw; (D: For 5 X 7 Frame) 3/4" X 6-1/2", Cap Screw; 3/4" X 6-1/2", Cap Screw; (E: ( -Xxxxxx) 4250-01*90; 4450-0270) 3/4" X 6-1/2" Hs, Sae 8, Cap Screw; 3/4" X 6-1/2", Hs Sae 8, Cap Screw; (A) 3/4" X 6-1/2", Cap Screw; (C: ( -Xxxxxx) 4650-0192; 4850-0152) 3/4" X 6-1/2" Hs 8 Sae, Cap Screw; (B: Wide) 3/4" X 6-1/2" (Hs, Sae 8), Cap Screw; (D: Wide) (F: Coarse Thread) 3/4" X 6-1/2" Hs, Sae 8, Cap Screw; (A: ( -Xxxxxx) 4050-0035; 4250-01*90) 3/4" X 6-1/2" Hs, Sae 8, Cap Screw; 3/4" X 6-1/2" Hs 8 Sae	1
24***03	Washer; 25/32" X 2" X 0.180" (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", (12'-2' Through 15'-0") (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", Washer; 25/32" X 2" X 0.180", (13'-10" Through 19'-10") (10,000 Lb Chain), Washer; 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180" 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180", (For 10,000 Lb Chain), Washer; 25/32" X 2" X 0.180" Tension, Washer; 25/32" X 2" X 0.180", (12 Used L.H.) (12 Used R.H.)	1

See all parts with full part numbers in Heavy Parts AI →

Jack Stand (For Drawn Disks)

John Deere : 620 - Disk : Jack Stand (For Drawn Disks)

AA***92	Quick Lock Pin; (700), Quick Lock Pin; (Sub For B11192), Quick Lock Pin; (Sub For B11182) (Used On John Deere 2010 Tractors), Quick Lock Pin; (750), Quick Lock Pin, Quick Lock Pin; (Sub A15146), Quick Lock Pin; (A), Quick Lock Pin; 6,3 X 44,4 mm, Quick Lock Pin; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)), Quick Lock Pin; (Sub For M115827, This Application), Quick Lock Pin; (Sub For Am1926t Or B11182), Quick Lock Pin; (Use With Re180668), Quick Lock Pin; (Sub For B11182) 730 Tractor, Quick Lock Pin; 1/4", Quick Lock Pin; (A: Included In Ae48634), Quick Lock Pin, Quick Lock Pin; 45 Ft, 53 Ft And 61 Ft, Quick Lock Pin; (Sub For M72598), Quick Lock Pin; Surtir Con Ap39650, Quick Lock Pin; (Sub For B11182), Quick Lock Pin; Sub For Ar62151 Appl, Quick Lock Pin; (B), Quick Lock Pin; (C), Quick Lock Pin; (Sub For Ar62151, This Application), Quick Lock Pin; (Use With An103655), Quick Lock Pin; Less Germany, Quick Lock Pin; (Sub For Ar83396), Quick Lock Pin; (A: (-Xxxxxx) 7600-00*26; 7700-0020; 7800-01**50), Quick Lock Pin; (2 Used Per Pin), Quick Lock Pin; (Sub For B11182) Herbicide Only, Quick Lock Pin; (Sub For Ac14488), Quick Lock Pin; (For Dc203829, Dc208936), Quick Lock Pin; (A) (B), Quick Lock Pin; (A: Also Use With Fi Kit Mn10741), Quick Lock Pin; 11'5" - 26'5", Quick Lock Pin; (Sub For Wp905772), Quick Lock Pin; 6.4 mm (1/4"), Quick Lock Pin; Furnish With Ap39650	1
AA***31	Handle; For Kack With Grey Knob, Handle; Sleeve Type, Handle; (Sub Pt18656) Sleeve Type, Handle; (Sleeve Type), Handle; (Sub Pt20920) (Includes Grey Knob), Handle; (Sleeve Type) (Sub Aa23770), Handle; Grey Knob, (Sub For Aa27831), Handle; For Jack With Grey Knob., Handle; For Jack With Grey Knob, Handle; For Jack With Grey Handle, Handle; (Includes Grey Knob) (Sub Pt18656), Handle; (B), Handle; (Sub Pt18656) (Sleeve Type), Handle; (Sleeve Type) (Sub Pt18656), Handle; (Sleeve Type) (Includes Grey Knob) (Sub Pt18656), Handle; Sleeve Type, (Sub Pt18656), Handle; (Knob Type), Handle; (Includes Grey Knob) (Sleeve Type) (Sub Pt18656), Handle	1
AN***55	Jack; (With Sleeve Handle), Jack; 2000 Lbs., Jack; (For Use With Drawbar Clevis) 2-Bar Frame Only, Jack; (With Knob Handle), Jack; 2-Unit Hitch, Jack; (Sub For Ac14129), Jack, Jack; (700), Jack; (For Use With Drawbar Clevis), Jack; (Sub For Ac14138), Jack; (750), Jack; With Knob Handle, Jack; With Sleeve Handle, Jack; (Includes Handle)	1
N1***29	Pin; (Sub For Ac14488), Pin; Surtir Con Ap39650, Pin; (Sub For N133193, This Application), Pin; (Sub For Wp321502b91), Pin; 45 Ft, 53 Ft And 61 Ft, Pin; Furnish With Ap39650, Pin; 2-Unit Hitch, Pin, Pin; (Sub For Kk5866b) (This Application Only), Pin; (Sub For E54915), Pin; (Sub For Kk5866b, This Application), Pin; (Sub For Kk5866b), Pin; (Sub For E54915) Jack, Pin; (Sub For Kk5866b) (750) (This Application Only), Pin; (Use With An103655) (Sub For Kk5866b This Application Only), Pin; (Sub For Kk5866b) (700) (This Application Only), Pin; Jack Attaching	1

See all parts with full part numbers in Heavy Parts AI →

Leveling Rod And Pivot (For Drawn Disks)

John Deere : 620 - Disk : Leveling Rod And Pivot (For Drawn Disks)

03***76	Bolt; 3/4" X 2-1/4" 3/4"X 2-1/4", Bolt; 3/4" X 2-1/4"	2
11***40	Cotter Pin; (B: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm (Hs=10.9), Cotter Pin; (A: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6,3 X 50mm, Cotter Pin; 6.300 X 50 mm, Category Ii, Cotter Pin; (D) 0.248" X 1.969", Cotter Pin; 6.300 X 50 mm, (Use With N186178), Cotter Pin; 6.300 X 50 mm (For P74011), Cotter Pin; 6.300 X 50 mm (Use With N186178), Cotter Pin; 6.300 X 50 mm (For A89333 And A89334), Cotter Pin; 6.300 X 50 mm, (4 Used With 3-Point Hitch, 8 Used With Loader), Cotter Pin; (B: Pull-Type Rotary Cutter Only) 6.300 X 50 mm, Cotter Pin; (B) 0.248" X 1.969", Cotter Pin; 6 X 50 mm (Sub For 11m1416), Cotter Pin; (A: 12'-6" To 27'-6") 6.300 X 50 mm, Cotter Pin, Cotter Pin; 6.300 X 50 mm, Cotter Pin; (A: Baler With Precutter) 6.300 X 50 mm, Cotter Pin; (B: For Baletrak) 6.300 X 50 mm, Cotter Pin; 6,3x50mm, Cotter Pin; (A: Hitch) 6.300 X 50 mm (Cat-Ii), Cotter Pin; 6,3 X 50 mm, Cotter Pin; 6.300 X 50 mm (0.248" X 1.969"), Cotter Pin; 6.300 X 50 mm, (Use Without Mechanical Front Wheel Drive), Cotter Pin; (D: Not For Elc Plus Monitor) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm, (Sub For 11h249), Cotter Pin; 0.248" X 1.969"	1
11***73	Pin; 8 X 63 mm, (3-Point), Pin, Pin; 0.315" X 2.480", Pin; 8 X 63 mm, Pin; 8 X 63 mm, (Sub For 11h218), Pin; 8 X 63 mm (Sub For 11m7056, This Application), Pin; 8 X 63 mm, 4-Row Narrow, Pin; 8 X 63 mm, (Sub For T110423), Pin; 8 X 63 mm, (Sub For T110424)	1
14***06	Nut; 1" Model 8w, 10w, 10n And 12n, Nut; 1" Jam, Nut; 1", R.H. Thread, Nut; 1", Jam, Nut; 1", Nut, Nut; 1" (Jam Nut), Nut; 25.400 mm (1"), Nut; 1" Rh Thread	1

See all parts with full part numbers in Heavy Parts AI →

Main Frame And Gang Attachments (For Drawn Disks)

John Deere : 620 - Disk : Main Frame And Gang Attachments (For Drawn Disks)

08***60	Cap Screw; 5/8" X 9", (For Rig Mounting) (For 7" X 7" Frame), Cap Screw; (B) 5/8"X9", Cap Screw; 5/8" X 9", Cap Screw; (B) 5/8" X 9", Cap Screw; 5/8" X 9", (For 7 X 7 Frame), Cap Screw; 5/8" X 9", (Use With 4 Quik-Tatch Weights), Cap Screw; (B: Four Weights) 5/8" X 9", Cap Screw; 5/8"X9" For Four Quik-Tatch Weights, Cap Screw; 5/8"X9", Four Quik-Tatch Weights, Cap Screw; 5/8"X9", For Four Quik-Tatch Weights, Cap Screw; (A) 5/8" X 9", Cap Screw; 5/8" X 9" For Four Front Weights, Cap Screw; 5/8" X 9", (Four Quik-Tatch Weights), Cap Screw; 5/8" X 9", (4 Quik-Tatch Weights), Cap Screw; (B), Cap Screw; 5/8" X 9", (For Rigid Machines), Cap Screw; (For Four Quik-Tatch Weights)	8
08***65	Bolt; 5/8" X 9-1/2", (700), Bolt; (B) 5/8"X9-1/2", Bolt; (B) 5/8" X 9-1/2", Bolt; 5/8" X 9-1/2", Bolt; (A) 5/8"X9-1/2", Bolt; (C) 5/8"X9-1/2", Bolt; 5/8"X9-1/2", Bolt; (B) (C), Bolt; 5/8" X 9-1/2" U/W 7 X 7 Tube, Bolt; 5/8" X 9-1/2", (750), Bolt, Bolt; (A: 8r40) (B: 10r30 And 12r30) 5/8" X 9-1/2"	4
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	15
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2

See all parts with full part numbers in Heavy Parts AI →

Main Frame, Narrow, Category 1 (For Integral Disks) 185 Mm (7-1/4") Spacing; 2.0 M (6';7") Size 230 Mm (9") Spacing; 1.9 M (6';3") Size

John Deere : 620 - Disk : Main Frame, Narrow, Category 1 (For Integral Disks) 185 Mm (7-1/4") Spacing; 2.0 M (6';7") Size 230 Mm (9") Spacing; 1.9 M (6';3") Size

14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	8
19***28	Cap Screw; 5/8" X 4" 18'9" And 21'9", Cap Screw; 5/8" X 4", Cap Screw; 5/8"X4", Cap Screw; (R) 5/8" X 4", Cap Screw; 15.875 X 101.600 mm (5/8" X 4") Used Where Light Bracket Attaches, Cap Screw; (B) 5/8" X 4", Cap Screw; 5/8" X 4", (16 X 6 Disk) (8 X 12, 10 X 10 And 7 X 14 Hoe), Cap Screw; (D) 5/8" X 4", Cap Screw; 5/8" X 4" Use With 6" Spacing On S-Tine Models, Cap Screw; (B) 5/8" X 4", (Rear Flange To Flywheel Housing), Cap Screw; 5/8" X 4", (Rigid Models Only), Cap Screw; 5/8" X 4", Upper And Lower Holes (For 6359t Engine), Cap Screw; 5/8"X4, Cap Screw; (B) (C) (D) 5/8" X 4", Cap Screw; 5/8" X 4", (With Markers), Cap Screw; 5/8" X 4", No. 4 Grab Roll, Cap Screw; (B), Cap Screw; (A) 5/8" X 4", Cap Screw; (C) 5/8" X 4", Cap Screw; 5/8" X 4" Main Frame Front, Cap Screw; 5/8" X 4" (For Rigid Models Only), Cap Screw; 5/8"X4" W/Dual-Stage Clutch, Cap Screw; 5/8" X 4" (15'9"), Cap Screw; 5/8" X 4" (A), Cap Screw; 5/8" X 4", (7 X 14 Hoe)	8
19***67	Cap Screw; (A: 32" Or 34" Wheel) 3/4" X 3-1/4" Hs 8 Sae, Cap Screw; 3/4" X 3-1/4" (Hs, Sae 8) Rear Top (29'-3" And 32'-1"), Cap Screw; 3/4" X 3-1/4" Hs Sae 8 (Side Member To Cross Member), Cap Screw; 3/4" X 3-1/4" Hs, Sae8 (Side Member To Cross Member), Cap Screw; 3/4" X 3-1/4" Hs=10.9, Sae 8, Cap Screw; 3/4" X 3-1/4" (Hs, Sae 8) Rear Top, Cap Screw; (A), Cap Screw; 3/4" X 3-1/4" Hs Sae 8, Cap Screw; 3/4" X 3-1/4" Hs, Sae 8, (Use With R72266), Cap Screw; 3/4" X 3-1/4", Cap Screw; (A) 3/4" X 3-1/4" Hs, Sae 8, (Use With R72266), Cap Screw; 3/4" X 3-1/4" Hs, Sae 8, Cap Screw; (C) 3/4" X 3-1/4" (Hs, Sae 8) Rear Top, Cap Screw; 3/4" X 3-1/4", Cap Screw; 3/4" X 3-1/4" (Hs, Sae 8), Cap Screw; (A: United Kingdom) 3/4" X 3-1/4", Cap Screw; (A) 3/4" X 3-1/4", Hs, Sae 8, Cap Screw; 3/4" X 3-1/4" (Hs, Sae8), Cap Screw; 3/4" X 3-1/4" Hs, Sae 8 (32" Or 34" Wheel), Cap Screw; 3/4" X 3-1/4" Hs, Sae 8, (32" Or 34" Wheel), Cap Screw; (A: Hs=10.9, Sae 8) 3/4" X 3-1/4", Cap Screw; (A: Rear Hinge To Torque Divider) 3/4" X 3-1/4" Hs, Sae 8, Cap Screw; (B: Torque Divider To Rear Hinge) 3/4" X 3-1/4" Hs, Sae 8, Cap Screw; 3/4" X 3-1/4", Hs Sae 8, Cap Screw	4
24***03	Washer; 25/32" X 2" X 0.180" (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", (12'-2' Through 15'-0") (10,000 Lb Chain), Washer; 25/32" X 2" X 0.180", Washer; 25/32" X 2" X 0.180", (13'-10" Through 19'-10") (10,000 Lb Chain), Washer; 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180" 25/32" X 2" X .180", Washer; 25/32" X 2" X 0.180", (For 10,000 Lb Chain), Washer; 25/32" X 2" X 0.180" Tension, Washer; 25/32" X 2" X 0.180", (12 Used L.H.) (12 Used R.H.)	4

See all parts with full part numbers in Heavy Parts AI →

Main Frame, Wide, Category 1 And Category 2 (For Integral Disks) 185 Mm (7-1/4") Spacing; 2.4 M (7';9"), 2.7 M (8';10") And 3.0 M (10';0") Sizes 230 Mm (9") Spacing; 2.3 M (7';8"), 2.8 M (9';2") And 3.2 M (10';7") Sizes

John Deere : 620 - Disk : Main Frame, Wide, Category 1 And Category 2 (For Integral Disks) 185 Mm (7-1/4") Spacing; 2.4 M (7';9"), 2.7 M (8';10") And 3.0 M (10';0") Sizes 230 Mm (9") Spacing; 2.3 M (7';8"), 2.8 M (9';2") And 3.2 M (10';7") Sizes

11***40	Cotter Pin; (B: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm (Hs=10.9), Cotter Pin; (A: With Rotor-Type Pickup) 6.300 X 50 mm, Cotter Pin; 6,3 X 50mm, Cotter Pin; 6.300 X 50 mm, Category Ii, Cotter Pin; (D) 0.248" X 1.969", Cotter Pin; 6.300 X 50 mm, (Use With N186178), Cotter Pin; 6.300 X 50 mm (For P74011), Cotter Pin; 6.300 X 50 mm (Use With N186178), Cotter Pin; 6.300 X 50 mm (For A89333 And A89334), Cotter Pin; 6.300 X 50 mm, (4 Used With 3-Point Hitch, 8 Used With Loader), Cotter Pin; (B: Pull-Type Rotary Cutter Only) 6.300 X 50 mm, Cotter Pin; (B) 0.248" X 1.969", Cotter Pin; 6 X 50 mm (Sub For 11m1416), Cotter Pin; (A: 12'-6" To 27'-6") 6.300 X 50 mm, Cotter Pin, Cotter Pin; 6.300 X 50 mm, Cotter Pin; (A: Baler With Precutter) 6.300 X 50 mm, Cotter Pin; (B: For Baletrak) 6.300 X 50 mm, Cotter Pin; 6,3x50mm, Cotter Pin; (A: Hitch) 6.300 X 50 mm (Cat-Ii), Cotter Pin; 6,3 X 50 mm, Cotter Pin; 6.300 X 50 mm (0.248" X 1.969"), Cotter Pin; 6.300 X 50 mm, (Use Without Mechanical Front Wheel Drive), Cotter Pin; (D: Not For Elc Plus Monitor) 6.300 X 50 mm, Cotter Pin; 6.300 X 50 mm, (Sub For 11h249), Cotter Pin; 0.248" X 1.969"	1
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	8
19***28	Cap Screw; 5/8" X 4" 18'9" And 21'9", Cap Screw; 5/8" X 4", Cap Screw; 5/8"X4", Cap Screw; (R) 5/8" X 4", Cap Screw; 15.875 X 101.600 mm (5/8" X 4") Used Where Light Bracket Attaches, Cap Screw; (B) 5/8" X 4", Cap Screw; 5/8" X 4", (16 X 6 Disk) (8 X 12, 10 X 10 And 7 X 14 Hoe), Cap Screw; (D) 5/8" X 4", Cap Screw; 5/8" X 4" Use With 6" Spacing On S-Tine Models, Cap Screw; (B) 5/8" X 4", (Rear Flange To Flywheel Housing), Cap Screw; 5/8" X 4", (Rigid Models Only), Cap Screw; 5/8" X 4", Upper And Lower Holes (For 6359t Engine), Cap Screw; 5/8"X4, Cap Screw; (B) (C) (D) 5/8" X 4", Cap Screw; 5/8" X 4", (With Markers), Cap Screw; 5/8" X 4", No. 4 Grab Roll, Cap Screw; (B), Cap Screw; (A) 5/8" X 4", Cap Screw; (C) 5/8" X 4", Cap Screw; 5/8" X 4" Main Frame Front, Cap Screw; 5/8" X 4" (For Rigid Models Only), Cap Screw; 5/8"X4" W/Dual-Stage Clutch, Cap Screw; 5/8" X 4" (15'9"), Cap Screw; 5/8" X 4" (A), Cap Screw; 5/8" X 4", (7 X 14 Hoe)	8
19***67	Cap Screw; (A: 32" Or 34" Wheel) 3/4" X 3-1/4" Hs 8 Sae, Cap Screw; 3/4" X 3-1/4" (Hs, Sae 8) Rear Top (29'-3" And 32'-1"), Cap Screw; 3/4" X 3-1/4" Hs Sae 8 (Side Member To Cross Member), Cap Screw; 3/4" X 3-1/4" Hs, Sae8 (Side Member To Cross Member), Cap Screw; 3/4" X 3-1/4" Hs=10.9, Sae 8, Cap Screw; 3/4" X 3-1/4" (Hs, Sae 8) Rear Top, Cap Screw; (A), Cap Screw; 3/4" X 3-1/4" Hs Sae 8, Cap Screw; 3/4" X 3-1/4" Hs, Sae 8, (Use With R72266), Cap Screw; 3/4" X 3-1/4", Cap Screw; (A) 3/4" X 3-1/4" Hs, Sae 8, (Use With R72266), Cap Screw; 3/4" X 3-1/4" Hs, Sae 8, Cap Screw; (C) 3/4" X 3-1/4" (Hs, Sae 8) Rear Top, Cap Screw; 3/4" X 3-1/4", Cap Screw; 3/4" X 3-1/4" (Hs, Sae 8), Cap Screw; (A: United Kingdom) 3/4" X 3-1/4", Cap Screw; (A) 3/4" X 3-1/4", Hs, Sae 8, Cap Screw; 3/4" X 3-1/4" (Hs, Sae8), Cap Screw; 3/4" X 3-1/4" Hs, Sae 8 (32" Or 34" Wheel), Cap Screw; 3/4" X 3-1/4" Hs, Sae 8, (32" Or 34" Wheel), Cap Screw; (A: Hs=10.9, Sae 8) 3/4" X 3-1/4", Cap Screw; (A: Rear Hinge To Torque Divider) 3/4" X 3-1/4" Hs, Sae 8, Cap Screw; (B: Torque Divider To Rear Hinge) 3/4" X 3-1/4" Hs, Sae 8, Cap Screw; 3/4" X 3-1/4", Hs Sae 8, Cap Screw	4

See all parts with full part numbers in Heavy Parts AI →

Middlebreaker (For Drawn Disks)

John Deere : 620 - Disk : Middlebreaker (For Drawn Disks)

08***24	Cap Screw; 1/2" X 6-1/2", With 4" Thread, Cap Screw; 1/2" X 6-1/2", Cap Screw; 1/2" X 6-1/2", (With 4-1/2" Threads), Cap Screw; 1/2" X 6-1/2", (With 4" Threads), Cap Screw; 1/2" X 6-1/2", With 4" Threads, Cap Screw; 1/2" X 6-1/2", With 4" Of Threads	1
09***65	Bolt; 7/16" X 1-1/2"	2
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	1
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	1

See all parts with full part numbers in Heavy Parts AI →

Operator'S Manual Holder And Support

John Deere : 620 - Disk : Operator'S Manual Holder And Support

19***52	Cap Screw; (Sub R74660 And R74661, This Application), Cap Screw; 5/16" X 1-1/2" (Hs, Sae 8), Cap Screw; 5/16"X1-1/2", Cap Screw; 5/16" X 1-1/2", Cap Screw; 5/16" X 1-1/2", (Na-D, Na-G, Dn-01, Gn-01), Cap Screw, Cap Screw; (Sub R74660 And R74661, Appl), Cap Screw; 5/16" X 1-1/2" (Sub R74660 And R74661, Appl), Cap Screw; 5/16" X 1-1/2" (Sub R74660 And R74661, Appl), Cap Screw; 5/16" X 1-1/2", 0.48mm (.019"), Cap Screw; 5/16" X 1-1/2", Cap Screw; 5/16" X 1-1/2" (Use With At63813), Cap Screw; 7.925 X 38.100 mm, Cap Screw; 5/16" X 1-1/2", (Hs, Sae 8), Cap Screw; 5/16" X 1-1/2" Incld In 2, Cap Screw; 5/16" X 1-1/2", (Sub For R27178), Cap Screw; 5/16" X 1-1/2" (Use With Spacers), Cap Screw; 5/16" X 1-1/2", (Without Relay Bracket), Cap Screw; 5/16" X 1-1/2", (Hs Sae 8), Cap Screw; 5/16" X 1-1/2" (Sae 8), Cap Screw; 5/16" X 1-1/2", Hs, Sae 8, Cap Screw; 5/16" X 1-1/2", (2 Used, Gh-01; 4 Used, Dh-03), Cap Screw; 5/16" X 1-1/2", (5010), Cap Screw; 5/16" X 1-1/2", (Use With Spacers), Cap Screw; 5/16" X 1-1/2", (With Relay Bracket), Cap Screw; 5/16" X 1-1/2", (600ahi-Cycles), Cap Screw; 5/16" X 1-1/2" Hs, Sae 8	4
AN***71	Container; Operators Manual, Container, Container; (Sub For An241450) Includes N242383 Gasket, Container; (B: Operator'S Manual Container) (Sub For An241450), Container; (Sub For An241450), Container; Operator'S Manual, Container; (Sub For An241450)Operator'S Manual, Container; Operator Manual Holder, Container; (Sub For An241450) Operator'S Manual, Container; (Sub For An241450)Operator'S Manual Container, Container; (Sub For An241450) Operator'S Manual Container	1
K4***01	Lock Nut; 1/4", (Sub For Ffsb102853), Lock Nut; 6.350 mm (1/4"), Lock Nut; (Sub For B14174), Lock Nut; (A) 1/4", (Sub For E45229), Lock Nut; 1/4", (84 Used For 714, 714a; 98 Used For 716, 716a), Lock Nut; 1/4", (Sub For E45229), Lock Nut; (Sub For E45229), Lock Nut; 6.350 mm, Use With 6 Foot Console Harness, Lock Nut; (B), Lock Nut; (Sub For E45229 And B14174), Lock Nut; 1/4", (Sub For Mg280129), Lock Nut; (Sub For E14174 And E45229), Lock Nut, Lock Nut; (Sub For N10217), Lock Nut; Sub For M63707, Lock Nut; (Sub For E45229, This Application), Lock Nut; (A) (B) (C) 1/4", (Sub For B14174 And E45229), Lock Nut; 6.350 mm, Lock Nut; (Sub For Mg280129), Lock Nut; ( Ffsb102853 No Longer Available), Lock Nut; (Sub For B14174 And E45229), Lock Nut; 6.350 mm (1/4") (Sub For B14174), Lock Nut; 1/4", (Sub For B14174), Lock Nut; 1/4", (29 Used For 714, 714a; 35 Used For 716, 716a), Lock Nut; 1/4", (Sub For Bp12222 Or E36563 Or E45229), Lock Nut; (A) 1/4", Lock Nut; 1/4", (Europe), Lock Nut; 1/4", (Sub For E45229, This Application), Lock Nut; 1/4", Lock Nut; (Sub For B14174 Or E45229), Lock Nut; (A), Lock Nut; 1/4", (Sub For E36563) (Sub For E45229), Lock Nut; 1/4", (Sub For B14174 And E45229), Lock Nut; 6.350 mm (Europe), Lock Nut; 1/4", (56 Used For 714, 714a; 64 Used For 716, 716a)	4
K4***02	Lock Nut; (A), Lock Nut; 5/16", 4-Row Wide, Lock Nut; (D) 7.925 mm (5/16") (Sub For T25249), Lock Nut; 7.925 mm (5/16") Rh, Lock Nut; 5/16" (24) Per Bat, Lock Nut; 7.925 mm (5/16") 5/16", (Sub For T25249), Lock Nut; 7.925 mm (5/16") (Sub For W11955), Lock Nut; 7.925 mm (5/16") , For 8-W And 8-N, Lock Nut; (C) 7.925 mm (5/16") (Sub For T25249) (2 Per Support Tube), Lock Nut; 5/16", (Sub For H494dn), Lock Nut; 7.925 mm (5/16") (Rh), Lock Nut; 7.925 mm (4 X 16), Lock Nut; (B) (C) 5/16", Lock Nut; (A: Separate Fertilizer Placement), Lock Nut; 7.925 mm (5/16") Heavy-Duty Scraper Attachments, Lock Nut; (B) 7.925 mm (5/16") (Sub For T25249), Lock Nut; (Sub For T25249), Lock Nut; (A) (B), Lock Nut; (Sub For E50101, This Application), Lock Nut; (B) (C) 7.925 mm (5/16") (Sub For T25249), Lock Nut; 7.925 mm (5/16") (Sub For T25249), Lock Nut; (A) 5/16", Lock Nut; 5/16", Used W/O Scrapers, Lock Nut, Lock Nut; 7.925 mm, Lock Nut; 7.925 mm (5/16"), Lock Nut; (Sub For W11955), Lock Nut; 7.925 mm (5/16") (Sub For T25249) For 12n, Lock Nut; (B), Lock Nut; (A) (B) 7.925 mm (5/16") (Sub For T25249) (2 Per Support Tube), Lock Nut; 5/16" (Disk), Lock Nut; (A) 7.925 mm (5/16") (Sub For T25249), Lock Nut; 5/16", Lock Nut; 5/16-18, Lock Nut; 5/16", Use Without Scrapers, Lock Nut; 7.925 mm (5/16") (Sub For T25249) For 4w, 6n, 6w, Lock Nut; (Sub For Gdy111), Lock Nut; 7.925 mm Use Without Scrapers, Lock Nut; (A) (C) 7.925 mm (5/16") (Sub For T25249)	4

See all parts with full part numbers in Heavy Parts AI →

Reflector And Bracket

John Deere : 620 - Disk : Reflector And Bracket

AA***31	Bracket; Reflector Assembly, Bracket, Bracket; 3/4" X 2" Cap Screw 19h1768 Used To Attach To Outer Frame Plate Of 9-Standard Aa27789 Frame, Bracket; 3/4" X 4-1/2" Cap Screw 19h2084 Used To Attach To Outer Frame Plate Of 9-Standard Aa33228 Frame, Bracket; Reflector Assembly, (Sub An250166), Bracket; 3/4" X 4-1/2" Cap Screw 19h2084 Used To Attach To Outer Frame Plate Of 9-Standard Aa33228 Frame Or 3/4" X 3-1/2" Cap Screw 19h1735 Used To Attach To Outside Rear Standard Caps A31673 To Scraper A50454 On 4.6 M (15'2") Heavy Duty	2
AN***66	Bracket; (Sub For Aa36031)Reflector Assembly, Bracket, Bracket; Reflector Assembly	1
JD***21	Label; (G: Yellow) (H: Front Outer), Label; (A) Yellow, Label; (Sub For Jd5906)Yellow Reflector, Label; (D: Yellow) (A), Label; Amarelo/Amarillo/Yellow, Label; 50mm X 230mm Yellow, Label; Amber, Label; (E: Color: Yellow) Lgth = 230 X 50 mm, Label; (D) R.H. And L.H., Label; (B: Red), Label; Yellow (Front Outer), Label; (A) (C), Label; (Amber) (Sub For Jd5905, This Application) (Cut To Fit), Label; (A) Amber, Label; Yellow, (Sub For Jd5925 And Jd5583), Label; (F: Yellow), Label; Yellow (On Front Of Mounting Plate), Label; (A: Extension), Label; (H: Extension) Rh And Lh, Label; (B: Amber) 2" X 6.3", Label; (E: Yellow) (H: Front Outer), Label; (A: Color: Yellow), Label; Yellow (50 X 230), Label; Amber Reflector, Label; (D: Yellow), Label; (H: Yellow), Label; (D: Yellow) (G: Front Outer), Label; Yellow Reflector, Label; (F: Yellow) (I: Front Outer), Label; (Amber) (Front Of Top Beam 2-Inch From L.H. End And Top Front Of L.H. And R.H. Plate) (Kit Ah100289), Label; Yellow (Left Hand Front Only), Label; (H: Yellow (Front Outer)), Label; (B: Xxxxxx- 446(13*64) 546(1320)) Yellow, Label; (A) (B) Yellow (50 X 230), Label; Orange, Label; (Sub For Jd5906)Amber, Label; (C: (Xxxxxx- ) 14'(1301- ) 16'(1301- ) 18'(1301- )) (B) Yellow, Label; Yellow (Use Under Decal On Side Of Unit On All Folding Planters Where Visible From Sides When Transporting; Use On Side Brackets On First And Last Row Units Of Front-Folding Planters) (Visible From Front When Tronsporting), Label; (A: Amber Light And Bracket Assembly) Amber, Label; (50 X 230) Yellow (On Front Of Marker Plate), Label; 50 X 230 mm Amber, Label; (50 X 230) Yellow, Label; (D: Amber) 50 X 230 mm, Label; (C), Label; (B: Yellow) 50mm X 230mm, Label; Yellow, Label; (A: 9550 (6901- ) 9550sh (6901- )), Label; (F: Amber Reflector), Label; (Sub For A50290)Amber, Label; (A: For 9650 ( -6900) & 9750 ( -6900)) Yellow, Label; (A), Label; 50" X 230", Reflective, Yellow, Label; Yellow, (Use Under Decal On Side Of Unit On All Folding Planters Where Visible From Sides When Transporting; Use On Side Brackets On First And Last Row Units Of Front-Folding Planters) (Visible From Front When Tronsporting), Label; (E: Yellow (Front Outer)), Label; Yellow (On Front Mounting Plate), Label; (Amber) (Front Of Top Beam 2-Inch From L.H. End, And Top Front Of L.H. And R.H. Plate) (Kit Ah100289) (Sub Jd5905), Label; (A: Yellow), Label; (Yellow) (Cut To Fit), Label; Label Reflective (Yellow) On Front Of Plate Opposite Red Label, Label; (A: For (6901- ) & 9750 (6901- )), Label; (B: Amber) (Sub For A50290), Label; 50 X 230 Amber, Label; Amber - On Left-Hand Front Tube On Main Frame And On Front Of Marker Lights, Label; (Amber) (Sub For Jd5905, This Application) L.H. Only (Cut To Fit), Label; (A) Reflective Tape (Amber), Label; (D) Rh And Lh, Label; (A: Extension) Yellow, Label; "Yellow" Located On Brackets, Label; 50 X 230 Yellow, Label; (A: Amber Warning Light And Bracket Assembly) Amber, Label; (I: Yellow), Label; (A: For North America (French) Only) (B: For North America (English) Only) (C: Yellow), Label; Reflective, Yellow, 50" X 230", Label; (E: Yellow), Label; Yellow, (With Transport Option: 930d-11 Used; 936d-14 Used), Label; (Red), Label; (C: Yellow) (H: Front Outer), Label; Label Reflective (Yellow) (On Front Of Plate Opposite Red Label), Label; (B: Yellow), Label; (D: Extension) Rh And Lh, Label; (E: Amber Reflector), Label; (A: 9550 ( -6900) 9550sh ( -69**00)) Yellow, Label; (Sub For Jd5906) Amber Reflector, Label; "Amber" Reflective Tape; Located On Front L.H. Side Of Drill And On Marker Frame, Label; Yellow, Located On Front Of Arm, Label; (B), Label; (F: Amber), Label; (Sub For A50290) Amber, Label; (B) Yellow, Label; (J: Amber), Label, Label; (B: Yellow) (50 X 230), Label; (50 X 230 Yellow, Label; (B: Amber), Label; (Yellow), Label; Yelllow, Label; (I: Yellow) (G: Front Outer), Label; (H), Label; 50x230 Yellow, Label; (C: Yellow), Label; Yellow,50mm X 230mm, Label; Red, Label; (A) Label, Yellow	1
JD***05	Reflector; Amber, (Sub For Jd5581), Reflector; (A) (Sub For Jd5581) Reflective Tape (Amber), Reflector; Amber - On Left-Hand Front Tube On Main Frame, Reflector; 2" X 6.3" Amber (Sub For Jd5581), Reflector; "Amber" Reflective Tape; Located On Front L.H. Side Of Drill, Reflector; Yellow, Reflector; (J: Yellow) (Z), Reflector; Amber (Front, L.H. Side) (Sub For Jd5581 Or Jd200), Reflector; (G: Amber), Reflector; (Sub For Jd5581) Amber, Reflector; Amber (Front), Reflector; Amber (2" X 6-1/3") (Sub For Ga10405 And Jd5581), Reflector; (B) (Sub For Jd5581), Reflector; (A) Amber, (Sub For Jd5581), Reflector; (A) (Sub For Jd5581) Amber, Reflector; (A) Amber, (Sub For Jd5905), Reflector; Amber 50 mm X 160 mm (2" X 6-1/4"), Reflector; (A: Amber), Reflector; Yellow (C), Reflector; (Sub For Jd5581) (Amber) (Lh Divider), Reflector; (B: Not Illustrated), Reflector; (Amber) (Flex) (L.H. Divider Point) (Sub For Jd5581), Reflector; L.H. Only, Reflector; (Sub For Jd5581) Yellow, Reflector; Yellow; Included In Dual Wheel Extension Kit, Reflector; (Sub For Jd5581)Amber, Reflector; 2" X 6.3" Amber, (Sub For Jd5581), Reflector; (B: Amber) (Sub For Jd5581), Reflector; Amber, (Sub For Ga10405 Or Jd5581), Reflector; 2" X 6.3" Amber, Reflector; (K: Yellow) (Z), Reflector; Amber, Reflector; Amber (2" X 6-1/4") (Sub For Jd5581), Reflector; (G: Amber) (Z), Reflector; (Amber) (L.H. Wing Only), Reflector; (Sub For Jd5581) Amber Reflective Tape, Reflector; Red, Reflector; (Amber) (Not Used On Offset Pull-Type) (Sub For Jd5581), Reflector; (Amber) (Front), Reflector; 50 X 160 mm (Sub For Jd5581) Yellow, Reflector; (Sub Jd5581) Yellow, Reflector; (O: Yellow) (Z), Reflector; (Amber) (Sub For Jd5581), Reflector; (D: Amber) Amber (Z), Reflector; 50 X 160 Yellow, Reflector; Yellow, (Sub Jd5921), Reflector; Amber, (Sub For Ga10405 And Jd5581), Reflector	2

See all parts with full part numbers in Heavy Parts AI →

Slow Moving Vehicle Post

John Deere : 620 - Disk : Slow Moving Vehicle Post

12***02	Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70*00) 9550sh ( -7000)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (7001- ) 9550sh (70*01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual)	2
14***86	Part Missing In Wise; 1/4", (Or), Part Missing In Wise; (A: Syncshuttle Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A), Part Missing In Wise; 1/4" (A) (Sub For K40001, This Application), Part Missing In Wise; 1/4", (Code 1637), Part Missing In Wise; 1/4", (Use With Gd1072), Part Missing In Wise; 1/4", (Sub For 28h1914), Part Missing In Wise; 1/2", Part Missing In Wise; (A: For 9650 (69*01-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4", Herbicide Only, Part Missing In Wise; 1/4", (United Kingdom Only), Part Missing In Wise; 1/4", (154 Used For 714, 714a; 172 Used For 716, 716a), Part Missing In Wise; (A: For 9650 (6901-) & 9750 (6901-)) 1/4", Part Missing In Wise; 1/4" (Steel Cleaning Paddle), Part Missing In Wise; (A) 1/4", (Use With E16050), Part Missing In Wise; 1/4" Lock, Part Missing In Wise; 1/4", (Sub R40694), Part Missing In Wise; (B: (-Xxxxxx) 4055-0100; 4255-0100; 4455-0200) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Part Missing In Wise; (A) 1/4", Nut; 1/4", (Sub For Ffsb109290), Part Missing In Wise; 1/4", 4-Wheel Drive Only, Part Missing In Wise; (B) 1/4", Part Missing In Wise; (A: Install In 1 Select. Control Valve) 1/4", Part Missing In Wise; 1/4", (7 Used, 6-Bolt)(9 Used, 8-Bolt), Part Missing In Wise; (A: (-Xxxxxx) 8560-0030; 8760-0021; 8960-0036) 1/4", Part Missing In Wise; X 1/4", Part Missing In Wise; 1/4" For Steel Cleaning Paddles, Part Missing In Wise; 1/4" (A), Part Missing In Wise; 1/4", (Use With Straw Chopper), Part Missing In Wise; 1/4", Part Missing In Wise; 1/4", (Kit Ty16162), Part Missing In Wise; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Part Missing In Wise, Part Missing In Wise; (A: 9550 (-7000) 9550sh (-7000)) 1/4", Part Missing In Wise; (A: Collarshift Transmission) 1/4" (Use With Re200625), Part Missing In Wise; (A: For 9650 (-6900) & 9750 (-6900)) 1/4", Part Missing In Wise; 1/4", (Sub For B13767), Part Missing In Wise; 1/4", (Use With Ar53461), Part Missing In Wise; 1/4", Light Switch, Part Missing In Wise; 1/4", Dry Hill-Drop Only, Part Missing In Wise; 1/4-20 Hex Nut Zyd., Part Missing In Wise; 1/4" (Bucket), Part Missing In Wise; 1/4", (Kits Ar69585 And Ar73922), Part Missing In Wise; 1/4", ((3) Used Less Cab, (2) Used With Cab), Part Missing In Wise; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Part Missing In Wise; 1/4" (For Ae26721, Ae55029), Part Missing In Wise; 1/4", 118 Flail Shredder, Part Missing In Wise; 1/4" (Sub For T135427), Nut; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (Sub For Pt16035), Part Missing In Wise; 1/4", (Steel Cleaning Paddle), Part Missing In Wise; 1/4" (Sub R40694), Nut; 1/4", (Not Illustrated), Part Missing In Wise; 1/4" Use For Three Controller System, Part Missing In Wise; 1/4" Low Shaft Speed Monitor, Part Missing In Wise; 1/4" (For Ae26721), Part Missing In Wise; 1/4", (Use With Ar93172 Or Re37448), Part Missing In Wise; (B: Syncshuttle Transmission With 540/540e) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", Europe, Part Missing In Wise; 1/4" Use For Three Controllers, Part Missing In Wise; (A: Note: Parts Marked (A) Are For 12' Main Frame, 5-Section Only) 1/4", Part Missing In Wise; 1/4", Kit Ar69585 And Ar73922, Part Missing In Wise; (B: Syncshuttle Transm. With 540/540e Power Take-Off) 1/4" (Use With Re200625), Part Missing In Wise; 1/4" (Not Illustrated), Part Missing In Wise; 1/4" (913, 915 - 40 Used;918 - 50 Used), Part Missing In Wise; 1/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Part Missing In Wise; (B: Powrreverser Transmission) 1/4" (Use With Re200625), Part Missing In Wise; 1/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Part Missing In Wise; 1/4", (Per Riser), Part Missing In Wise; (A: For 9650 Sts (-7000) & 9750sts (-70*00)) 1/4", Part Missing In Wise; 1/4" (B), Part Missing In Wise; 1/4", (50 Used For 714, 714a; 62 Used For 716, 716a), Nut; 6.350 mm, Part Missing In Wise; (C) 1/4", Part Missing In Wise; 1/4", (Sub For R40694) (Also Order 24h1287), Part Missing In Wise; 1/4", Inner, Part Missing In Wise; 1/4", (2 Used, Fixed Rear Axle; 4 Used, Adjustable Rear Axle), Part Missing In Wise; 1/4", (Gasoline And Lp-Gas) (4 Used Diesel), Nut; 1/4", Part Missing In Wise; 1/4" (Sub For 14h312), Part Missing In Wise; 1/4" Not Illustrated, Part Missing In Wise; 1/4", 115 Flail Shredder, Part Missing In Wise; 1/4" (1 Used, Hydraulic Auger Swing; 3 Used, Spring Assist Auger Swing), Part Missing In Wise; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Part Missing In Wise; 1/4", Special, Part Missing In Wise; 1/4", (Steel Cleaning Paddle, 2 Used; Bucket 54 Used), Part Missing In Wise; 1/4", Liquid Hill-Drop Only, Part Missing In Wise; 6.350 mm, Part Missing In Wise; 1/4", (Diesel), Part Missing In Wise; 1/4", 120 Flail Shredder, Part Missing In Wise; 1/4" (A), (B), Part Missing In Wise; 1/4" (W/ Cc18083), Part Missing In Wise; (A) 6.350 mm (1/4"), Part Missing In Wise; (A) (B) 1/4", Part Missing In Wise; 1/4", (Export), Part Missing In Wise; (A: Used With Optional Double Twine Arm.) 1/4", Part Missing In Wise; (A: 6076trw07 Only) 1/4", Part Missing In Wise; 1/4", ((3) Less Cab) ((2) Cab), Part Missing In Wise; 1/4" 1/4", Part Missing In Wise; 1/4" (Use With 12h302), Part Missing In Wise; 1/4", (Sub For W36249), Part Missing In Wise; 6.350 mm (1/4"), Part Missing In Wise; 1/4", (8 Bolt), Part Missing In Wise; (D) 1/4"	2
21***22	Screw; 1/4" X 1/2"	2
21***02	Screw; 1/4" X 5/8" (Use With 14h786), Screw; 1/4"X5/8", Screw; 1/4" X 5/8", Screw; 1/4" X 5/8", Use With Endwise Transport	2

See all parts with full part numbers in Heavy Parts AI →

Scrapers (For Integral Disks With Furrow Fillers) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Scrapers (For Integral Disks With Furrow Fillers) 185 Mm (7-1/4") Spacing

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	4
03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	60
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	20
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	60

See all parts with full part numbers in Heavy Parts AI →

Scrapers (For Integral Disks With Furrow Fillers) 230 Mm (9") Spacing

John Deere : 620 - Disk : Scrapers (For Integral Disks With Furrow Fillers) 230 Mm (9") Spacing

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	4
03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	52
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	20
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	52

See all parts with full part numbers in Heavy Parts AI →

Scrapers (For Integral Disks Without Furrow Fillers) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Scrapers (For Integral Disks Without Furrow Fillers) 185 Mm (7-1/4") Spacing

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	4
03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	56
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	20
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	56

See all parts with full part numbers in Heavy Parts AI →

Scrapers (For Integral Disks Without Furrow Fillers) 230 Mm (9") Spacing

John Deere : 620 - Disk : Scrapers (For Integral Disks Without Furrow Fillers) 230 Mm (9") Spacing

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	4
03***58	Bolt; (C) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", 118 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2" Sub For 03h1557, Bolt; (C: For 2.7 M (8'11") Size) 3/8" X 1-1/2", Bolt; (D: For 3.2 M (10'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.3 M (7'8") Size) 3/8" X 1-1/2", Bolt; 9.525 X 38.100 mm, Bolt; 3/8" X 1-1/2" (Use With 14h812), Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122; 25 Used For 125), Bolt; (D: For 3.0 M (10'0") Size) 3/8" X 1-1/2", Bolt; (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2", Bolt; (A: For 1.9 M (6'3") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (11 Used For 122; 13 Used For 125), Bolt; (214, 3 Used; 216,4 Used), Bolt; 3/8" X 1-1/2", Use With Bearing Bracket And Spacer, Bolt; 3/8" X 1-1/2" (Re-Use From Deck This Application), Bolt; 3/8" X 1-1/2" (Used With Skid Plates), Bolt; 3/8" X 1-1/2", (Sub For Mg88632), Bolt; (Use With 12h304 And 14h1076) (214, 3 Used; 216, 4 Used), Bolt; 3/8" X 1-1/2" (Regular), Bolt; (B) 3/8" X 1-1/2", Bolt; (A: For 2.0 M (6'7") Size) 3/8" X 1-1/2", Bolt; (B: For 2.4 M (7'9") Size) 3/8" X 1-1/2", Bolt; 3/8" X 1-1/2", Qty. Per Rotor, Bolt; 3/8" X 1-1/2" (Use With Skid Plates), Bolt; (C: For 2.8 M (9'2") Size) 3/8" X 1-1/2", Bolt; (Sub For (Ar) C16666) (Use With 12h304 And 14h1076) (19 Used For 122 And 25 Used For 125), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076), Bolt, Bolt; (A) 3/8" X 1-1/2", Bolt; (Conversion), Bolt; 3/8" X 1-1/2", 115 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck This Application), Bolt; 3/8" X 1-1/2", (Use With 12h304 And 14h1076) (17 Used For 122; 19 Used For 125), Bolt; 3/8" X 1-1/2", 120 Flail Shredder - Qty. Per Rotor, Bolt; 3/8" X 1-1/2", (Reuse From Deck, This Application), Bolt; 3/8" X 1-1/2" (Sub For Mg88632)	48
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	20
14***12	Nut; 3/8", For 915, Nut; 3/8" (B), Nut; 3/8", (14 Used, Regular; 12 Used, Long), Nut; 3/8" Rh, Nut; 3/8" (Flexible), Nut; (A) (B) (C) 3/8", Nut; 3/8" "Danger" (Drive Shaft), Nut; 3/8", (Ea-G, Ge-01), Nut; 3/8" (A), Nut; 3/8", Fertilizer Opener, Nut; 3/8" (Level Land), Nut; 3/8" Sub For 14h255, Nut; 3/8", (3 Used, 660,670) (5 Used, 671), Nut; 3/8" (W/ E42578) Key 3, Nut; (C) (D) 3/8", Nut; X X (A) 3/8", Nut; 3/8", For 5 Section, Nut; 3/8", (Sub. T32252), Nut; 3/8", (Semi-Integral), Nut; 3/8", For B27852 Only, Nut; 3/8", Ar, Nut; 3/8", (Na-D), Nut; 3/8", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Nut; (B: (Xxxxxx-) 7600-00*66; 7700-0074; 7800-0111) 3/8", Nut; (C: For 2.7 M (8'11") Size) 3/8", Nut; 3/8" (4 Used, Diesel; 6 Used, Gasoline), Nut; 3/8", (Sub N10215, This Application), Nut; 3/8" (W/ E42578), Nut; 3/8", Lh, Nut; 3/8" (Sub For T20165)(48 Teeth), Nut; 3/8" (Export) (Use With 24h1307), Nut; 3/8", 730 Tractor, Nut; 3/8", (Motorola), Nut; (D: For 3.0 M (10'0") Size) 3/8", Nut; 3/8" (Use With Delco-Remy), Nut; 3/8" (W/ Dc16312), Nut; 3/8" (W/ Dc16312 Or Ae29863), Nut; (C) 3/8", Nut; (A) (B) (C) (D) 3/8", Nut; (E), Nut; 3/8", (Mower Bar Only), Nut; 3/8", Nut; (A) 3/8", Outer, Nut; 9.525 mm (3/8") 3/8", Hs Sae 8, Nut; 3/8", (22 Used, Variable Drive; 26 Used, Long), Nut; (B) 3/8", Nut; 3/8", (Ty15243), Nut; 3/8" (Regular And Long), Nut; 3/8", (Posi-Torq), Nut; 3/8", (Re11254), Nut; 9.525 mm (3/8"), Nut; 3/8", For 8-Tooth Section, Nut; (C: For 2.8 M (9'2") Size) 3/8", Nut; (B: Code 2805 Manifold Center With Extension) 3/8", Nut; 3/8", (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8" (Sub For 14h384), Nut; 3/8" (Hydrostatic Drive), Nut; (A: For 2.0 M (6'7") Size) 3/8", Nut; 3/8" (8 Used, 12'; 12 Used, 20'), Nut; (B: For 2.3 M (7'8") Size) 3/8", Nut; 3/8", 2350, Nut; X 3/8", Nut; 3/8" 0,375", Nut; 3/8" 3/8", Nut; 3/8" (Without Dial-A-Matic), Nut; 3/8" (Sub For T27164), Nut; 3/8", (750), Nut; X 3/8", Nut; 3/8", Used On Ajax Special And Lever-Flexible Harrow Sections, Nut; 3/8", For 3.0 M (10') Size, Nut; 3/8" (Use With 12h304), Nut; 3/8" (Use With Motorola), Nut; (A) (B) 3/8", Nut; 3/8" (With Dial-A-Matic), Nut; 3/8", 12-Bar, Nut; 3/8" (B), (C), Nut, Nut; 3/8", For Spike-Tooth Sections, Nut; 3/8" (W/ E42578, E56101), Nut; 3/8", 2 Or 4 Used, Nut; 3/8", (Mower Bar), Nut; 3/8" Lh, Nut; 3/8", (2805), Nut; 3/8", For 6-Tooth Section, Nut; 3/8" Not Illustrated, Nut; 3/8" (Use With Skid Plates), Nut; 3/8" (28 Used, 18'; 36 Used, 20'), Nut; 3/8", Used With Steel Moldboard, Nut; 3/8", Nut; 3/8" (Rigid), Nut; 3/8", (Dh-03, Gh-01), Nut; 3/8" (W/ Dc18663 Or Dc18661), Nut; 3/8" (Round Shaft), Nut; 3/8", (Delco Remy), Nut; (B: For 2.4 M (7'9") Size) 3/8", Nut; 3/8", For 4 Section, Nut; (A: For 1.9 M (6'3") Size) 3/8", Nut; 3/8", (Sub 14h1076), Nut; 3/8", For 3.7 M (12') Size, Nut; 3/8" (17 Used, "In Position"; 15 Used, "Out Position"), Nut; 3/8"-16unc, Nut; 3/8" (W/ Ae29863 Or Dc17829), Nut; (F: Used With Steel Moldboard) 3/8", Nut; (A) 3/8", Nut; 3/8", (Delco-Remy), Nut; 3/8" (Sub N10215) This Application, Nut; 3/4", Nut; 3/8", Code 2805 And Code 2811, Nut; X X X 3/8", Nut; (B: (Xxxxxx- ) 7200-0098; 7400-0038) 3/8", Nut; 3/8", 4010 Or 4020 Tractor, Nut; X 3/8", Nut; 3/8" (Use With Re173973), Nut; 3/8" (Sub For 14h255), Nut; 3/8", (2 On Level Land;1 On Sidehill), Nut; 3/8", 1350, Nut; 3/8", (4 Used, Variable Drive; 6 Used, Long), Nut; 3/8" (8 Used, 18'; 12 Used, 20'), Nut; 3/8" (4 Used, Rh; 5 Used, Lh), Nut; 3/8", (4239d), Nut; 3/8", For 4.6 M (15') Size, Nut; 1/2", Nut; (E: (Xxxxxx-) 7600-0066; 7700-0074; 7800-0111) 3/8", Nut; 3/8" (4 Used, 18'; 6 Used, 20'), Nut; (B), Nut; 3/8", (Adjustable Rear Axle), Nut; 3/8", (2 Used, Variable Drive; 4 Used, Long), Nut; 3/8" (22 Used, 18'; 24 Used, 20'), Nut; 3/8" 918 (65**01- ) 75 Used, Nut; 3/8" (W/ E42578 Or E56101), Nut; 3/8"-16 Nc, Nut; 3/8" (Gh-01), Nut; 9.525 mm, Nut; 3/8" 3/8"-16unc, Nut; 3/8" (Posi-Torq), Nut; 3/8" (220-19 Used; 222 And 224-24 Used; 230 Rigid- 29 Used), Nut; 3/8", (22 Used, Regular Fixed And Variable Drive; 26 Used, Long), Nut; (D) 3/8", Nut; 3/8", (Option 3101, 3102, 3103), Nut; 3/8" (Use With Re198656), Nut; 3/8"-16 Unc, Nut; 3/8", (Regular), Nut; (A), Nut; 3/8", (Na-D, Na-G, Dn-01, Gn-01), Nut; 9.525 mm (3/8"), Nut; 3/8", (3014), Nut; 3/8" (918 Rigid), Nut; 3/8" (W/ E19709), Nut; 3/8" (B) (C), Nut; 3/8", For Gauge Shoe, Nut; 3/8" Sub For 14h812, Nut; (A) Roosa Master Dp,3/8", Nut; 3/8", (650), Nut; (D: For 3.2 M (10'7") Size) 3/8", Nut; 3/8", Outer, Nut; 3/8", (Use With A24646 Or A24647 And A24651), Nut; (D), Nut; 3/8" (Sub N10215, This Application), Nut; 3/8, Nut; 3/8", (Cornhead Attachment), Nut; 3/8"-24unf	48

See all parts with full part numbers in Heavy Parts AI →

Scrapers, Front (For Drawn Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Scrapers, Front (For Drawn Disks) 185 Mm (7-1/4") Spacing

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	6
03***09	Bolt; (B: For 3.0 M (10'0") Size) 3/8" X 1-3/4", Bolt; (D: For 3.7 M (12'4") Size) 3/8" X 1-3/4", Bolt; (C: For 3.6 M (12'0") Size) 3/8" X 1-3/4", Bolt; (D: For 4.0 M (13'5") Size) 3/8" X 1-3/4", Bolt; (B) 3/8" X 1-3/4", Bolt; (D) 3/8" X 1-3/4", Bolt; (C: For 3.4 M (11'2") Size) 3/8" X 1-3/4", Bolt; (C) 3/8" X 1-3/4", Bolt; (A: For 2.7 M (8'11") Size) 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4", Bolt; (A) 3/8" X 1-3/4", Bolt; (A: For 2.8 M (9'2") Size) 3/8" X 1-3/4", Bolt; (B: For 3.2 M (10'7") Size) 3/8" X 1-3/4", Bolt, Bolt; 3/8" X 1-3/4", Full Thread	36
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	18
16***09	Rivet; (B: For 2.4 M (7'9") Size) 3/8" X 3/4", Rivet; (B: For 3.0 M (10'0") Size) 3/8" X 3/4", Rivet; (D: For 4.0 M (13'5") Size) 3/8" X 3/4", Rivet; (A: For 2.0 M (6'7") Size) 3/8" X 3/4", Rivet; (C: For 2.7 M (8'11") Size) 3/8" X 3/4", Rivet; (D) 3/8" X 3/4", Rivet; (A: For 2.8 M (9'2") Size) 3/8" X 3/4", Rivet; (C: For 3.6 M (12'0") Size) 3/8" X 3/4", Rivet; (D: For 3.2 M (10'7") Size) 3/8" X 3/4", Rivet; (C) 3/8" X 3/4", Rivet; (B) 3/8" X 3/4", Rivet; 3/8" X 3/4", Rivet; (B: For 3.2 M (10'7") Size) 3/8" X 3/4", Rivet; (C: For 2.8 M (9'2") Size) 3/8" X 3/4", Rivet; (A: For 2.7 M (8'11") Size) 3/8" X 3/4", Rivet; (D: For 3.7 M (12'4") Size) 3/8" X 3/4", Rivet; (A: For 1.9 M (6'3") Size) 3/8" X 3/4", Rivet; (A) 3/8" X 3/4", Rivet; (C: For 3.4 M (11'2") Size) 3/8" X 3/4", Rivet; (B: For 2.3 M (7'8") Size) 3/8" X 3/4", Rivet; (D: For 3.0 M (10'0") Size) 3/8" X 3/4"	36

See all parts with full part numbers in Heavy Parts AI →

Scrapers, Front (For Drawn Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Scrapers, Front (For Drawn Disks) 230 Mm (9") Spacing

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	6
03***09	Bolt; (B: For 3.0 M (10'0") Size) 3/8" X 1-3/4", Bolt; (D: For 3.7 M (12'4") Size) 3/8" X 1-3/4", Bolt; (C: For 3.6 M (12'0") Size) 3/8" X 1-3/4", Bolt; (D: For 4.0 M (13'5") Size) 3/8" X 1-3/4", Bolt; (B) 3/8" X 1-3/4", Bolt; (D) 3/8" X 1-3/4", Bolt; (C: For 3.4 M (11'2") Size) 3/8" X 1-3/4", Bolt; (C) 3/8" X 1-3/4", Bolt; (A: For 2.7 M (8'11") Size) 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4", Bolt; (A) 3/8" X 1-3/4", Bolt; (A: For 2.8 M (9'2") Size) 3/8" X 1-3/4", Bolt; (B: For 3.2 M (10'7") Size) 3/8" X 1-3/4", Bolt, Bolt; 3/8" X 1-3/4", Full Thread	32
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	18
16***09	Rivet; (B: For 2.4 M (7'9") Size) 3/8" X 3/4", Rivet; (B: For 3.0 M (10'0") Size) 3/8" X 3/4", Rivet; (D: For 4.0 M (13'5") Size) 3/8" X 3/4", Rivet; (A: For 2.0 M (6'7") Size) 3/8" X 3/4", Rivet; (C: For 2.7 M (8'11") Size) 3/8" X 3/4", Rivet; (D) 3/8" X 3/4", Rivet; (A: For 2.8 M (9'2") Size) 3/8" X 3/4", Rivet; (C: For 3.6 M (12'0") Size) 3/8" X 3/4", Rivet; (D: For 3.2 M (10'7") Size) 3/8" X 3/4", Rivet; (C) 3/8" X 3/4", Rivet; (B) 3/8" X 3/4", Rivet; 3/8" X 3/4", Rivet; (B: For 3.2 M (10'7") Size) 3/8" X 3/4", Rivet; (C: For 2.8 M (9'2") Size) 3/8" X 3/4", Rivet; (A: For 2.7 M (8'11") Size) 3/8" X 3/4", Rivet; (D: For 3.7 M (12'4") Size) 3/8" X 3/4", Rivet; (A: For 1.9 M (6'3") Size) 3/8" X 3/4", Rivet; (A) 3/8" X 3/4", Rivet; (C: For 3.4 M (11'2") Size) 3/8" X 3/4", Rivet; (B: For 2.3 M (7'8") Size) 3/8" X 3/4", Rivet; (D: For 3.0 M (10'0") Size) 3/8" X 3/4"	32

See all parts with full part numbers in Heavy Parts AI →

Scrapers, Rear (For Drawn Disks) 185 Mm (7-1/4") Spacing

John Deere : 620 - Disk : Scrapers, Rear (For Drawn Disks) 185 Mm (7-1/4") Spacing

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	6
03***09	Bolt; (B: For 3.0 M (10'0") Size) 3/8" X 1-3/4", Bolt; (D: For 3.7 M (12'4") Size) 3/8" X 1-3/4", Bolt; (C: For 3.6 M (12'0") Size) 3/8" X 1-3/4", Bolt; (D: For 4.0 M (13'5") Size) 3/8" X 1-3/4", Bolt; (B) 3/8" X 1-3/4", Bolt; (D) 3/8" X 1-3/4", Bolt; (C: For 3.4 M (11'2") Size) 3/8" X 1-3/4", Bolt; (C) 3/8" X 1-3/4", Bolt; (A: For 2.7 M (8'11") Size) 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4", Bolt; (A) 3/8" X 1-3/4", Bolt; (A: For 2.8 M (9'2") Size) 3/8" X 1-3/4", Bolt; (B: For 3.2 M (10'7") Size) 3/8" X 1-3/4", Bolt, Bolt; 3/8" X 1-3/4", Full Thread	40
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	18
16***09	Rivet; (B: For 2.4 M (7'9") Size) 3/8" X 3/4", Rivet; (B: For 3.0 M (10'0") Size) 3/8" X 3/4", Rivet; (D: For 4.0 M (13'5") Size) 3/8" X 3/4", Rivet; (A: For 2.0 M (6'7") Size) 3/8" X 3/4", Rivet; (C: For 2.7 M (8'11") Size) 3/8" X 3/4", Rivet; (D) 3/8" X 3/4", Rivet; (A: For 2.8 M (9'2") Size) 3/8" X 3/4", Rivet; (C: For 3.6 M (12'0") Size) 3/8" X 3/4", Rivet; (D: For 3.2 M (10'7") Size) 3/8" X 3/4", Rivet; (C) 3/8" X 3/4", Rivet; (B) 3/8" X 3/4", Rivet; 3/8" X 3/4", Rivet; (B: For 3.2 M (10'7") Size) 3/8" X 3/4", Rivet; (C: For 2.8 M (9'2") Size) 3/8" X 3/4", Rivet; (A: For 2.7 M (8'11") Size) 3/8" X 3/4", Rivet; (D: For 3.7 M (12'4") Size) 3/8" X 3/4", Rivet; (A: For 1.9 M (6'3") Size) 3/8" X 3/4", Rivet; (A) 3/8" X 3/4", Rivet; (C: For 3.4 M (11'2") Size) 3/8" X 3/4", Rivet; (B: For 2.3 M (7'8") Size) 3/8" X 3/4", Rivet; (D: For 3.0 M (10'0") Size) 3/8" X 3/4"	40

See all parts with full part numbers in Heavy Parts AI →

Scrapers, Rear (For Drawn Disks) 230 Mm (9") Spacing

John Deere : 620 - Disk : Scrapers, Rear (For Drawn Disks) 230 Mm (9") Spacing

03***92	Bolt; 1/2" X 2" V - Tank, Bolt; (A) 1/2" X 2", Bolt; 1/2" X 2", (Sub N209232, N209170, (2) 19h1731, (2) E59406 And (3) 24h1309), Bolt; (E) 1/2" X 2", Bolt; (A) (B) (C) 1/2" X 2", Bolt; (B: Not Used In U.S. And Canada) (C: Radar Bracket) 1/2" X 2", Bolt; 1/2" X 2", Bolt; 1/2" X 2", (Use With 12h301 And 14h1040), Bolt; (B) 1/2" X 2", Bolt; 1/2" X 2" (Long Auger), Bolt; (A: For 2.8 M (9'2") Size) 1/2" X 2", Bolt; 1/2 X 2", Bolt; (A: European Version) 1/2" X 2", Bolt; 1/2" X 2" (Use With 14h826), (Long Auger), Bolt; (A) (B) 1/2" X 2", Bolt; (A) (D) 1/2" X 2", Bolt; (B) (C) (D) 1/2" X 2", Bolt, Bolt; 1/2" X 2", (Left Side Only), Bolt; (A) (B) (C) (D) 1/2" X 2", Bolt; (C) (D) 1/2" X 2", Bolt; (C) 1/2" X 2", Bolt; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2" X 2", Bolt; (D) 1/2" X 2", Bolt; 1/2" X 2" Radar Bracket To Battery Box, Bolt; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2" X 2"	6
03***09	Bolt; (B: For 3.0 M (10'0") Size) 3/8" X 1-3/4", Bolt; (D: For 3.7 M (12'4") Size) 3/8" X 1-3/4", Bolt; (C: For 3.6 M (12'0") Size) 3/8" X 1-3/4", Bolt; (D: For 4.0 M (13'5") Size) 3/8" X 1-3/4", Bolt; (B) 3/8" X 1-3/4", Bolt; (D) 3/8" X 1-3/4", Bolt; (C: For 3.4 M (11'2") Size) 3/8" X 1-3/4", Bolt; (C) 3/8" X 1-3/4", Bolt; (A: For 2.7 M (8'11") Size) 3/8" X 1-3/4", Bolt; 3/8" X 1-3/4", Bolt; (A) 3/8" X 1-3/4", Bolt; (A: For 2.8 M (9'2") Size) 3/8" X 1-3/4", Bolt; (B: For 3.2 M (10'7") Size) 3/8" X 1-3/4", Bolt, Bolt; 3/8" X 1-3/4", Full Thread	36
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	18
16***09	Rivet; (B: For 2.4 M (7'9") Size) 3/8" X 3/4", Rivet; (B: For 3.0 M (10'0") Size) 3/8" X 3/4", Rivet; (D: For 4.0 M (13'5") Size) 3/8" X 3/4", Rivet; (A: For 2.0 M (6'7") Size) 3/8" X 3/4", Rivet; (C: For 2.7 M (8'11") Size) 3/8" X 3/4", Rivet; (D) 3/8" X 3/4", Rivet; (A: For 2.8 M (9'2") Size) 3/8" X 3/4", Rivet; (C: For 3.6 M (12'0") Size) 3/8" X 3/4", Rivet; (D: For 3.2 M (10'7") Size) 3/8" X 3/4", Rivet; (C) 3/8" X 3/4", Rivet; (B) 3/8" X 3/4", Rivet; 3/8" X 3/4", Rivet; (B: For 3.2 M (10'7") Size) 3/8" X 3/4", Rivet; (C: For 2.8 M (9'2") Size) 3/8" X 3/4", Rivet; (A: For 2.7 M (8'11") Size) 3/8" X 3/4", Rivet; (D: For 3.7 M (12'4") Size) 3/8" X 3/4", Rivet; (A: For 1.9 M (6'3") Size) 3/8" X 3/4", Rivet; (A) 3/8" X 3/4", Rivet; (C: For 3.4 M (11'2") Size) 3/8" X 3/4", Rivet; (B: For 2.3 M (7'8") Size) 3/8" X 3/4", Rivet; (D: For 3.0 M (10'0") Size) 3/8" X 3/4"	36

See all parts with full part numbers in Heavy Parts AI →

Warning Lights (For Drawn Disks)

John Deere : 620 - Disk : Warning Lights (For Drawn Disks)

19***48	Bolt; 1/4" X 3/4", Right-Hand, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle - 2 Used) (Bucket - 54 Used), Bolt; (B) 1/4" X 3/4", Bolt; 1/4" X 3/4", Bolt; 1/4" X 3/4", Hs, Sae 8, Bolt; (A: Install In 1 Select. Control Valve) 1/4" X 3/4", Bolt; 1/4" X 3/4" (To Transmission Sight Tube Bracket), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 66 Used, Bucket), Bolt; 1/4" X 3/4", (Europe), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 66 Used), Bolt; 1/4" X 3/4", Not Used This Application, Cap Screw; 1/4" X 3/4", Bolt; 1/4" X 3/4", (84 Used For 714, 714a; 98 Used For 716, 716a), Bolt; 1/4"X3/4", Bolt; 1/4' X 3/4", Bolt; 1/4" X 3/4", (Use With Gd1072), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 54 Used, Bucket), Bolt; (A) 1/4" X 3/4", Bolt; 1/4" X 3/4", Europe, Bolt; 1/4" X 3/4" (Use With 14h786 And 24h1286), Bolt; 1/4" X 3/4", (Sub For Mg88573), Bolt; 1/4" X 3/4" 1/4 X 3/4, Bolt; 1/4" X 3/4" (Sub For 19h1919, This Application), Bolt; 1/4" X 3/4" (A), (B), Bolt; 1/4" X 3/4", Sweden Only, Bolt; 1/4" X 3/4", (Sub For Hmx03107), Bolt; 1/4" X 3/4", (Use With 12h302 And 14h786), Bolt; (A: 6076trw07 Only) 1/4" X 3/4", Bolt; 1/4" X 3/4", 7000 Flex-Fold And 7100 Integral Planters Only, Bolt; 1/4" X 3/4" (Steel Cleaning Paddle-2 Used; Bucket-96 Used), Bolt; 1/4" X 3/4" (Use With 14h786), Bolt; 1/4" X 3/4", Herbicide Only, Bolt; 1/4" X 3/4", (Not Used W/E55662), Bolt; 1/4"X3/4, (Use With Ar91662, Re30685), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used), Bolt; 1/4"X3/4 (For Ar91662, Re30685), Bolt; 1/4" X 3/4" (2 Used, Steel Cleaning Paddle; 96 Used, Bucket), Bolt; 1/4" X 3/4" (911), Bolt; 1/4" X 3/4" (A), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle), Cap Screw, Bolt; (A: ( -Xxxxxx) 8560-00*03; 8760-0051; 8960-00**14) 1/4" X 3/4", Bolt; (Use With Pt17843 Windowpane), Bolt; 1/4" X 3/4" Amber, Bolt; 1/4" X 3/4", (4402,4403), Bolt; 1/4" X 3/4", Amber, Bolt; (C) 1/4" X 3/4", Bolt; 1/4" X 3/4", 28" Rows Only, Bolt, Bolt; 1/4" X 3/4" (Sub For At216052), Bolt; 1/4" X 3/4", Germany And Italy, Bolt; 6.350 X 19.050 mm, Bolt; 1/4" X 3/4", (4408,4409), Bolt; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4" X 3/4", Bolt; (A) 1/4"X3/4", Bolt; 1/4" X 3/4", Small Hopper, Bolt; X 1/4" X 3/4", Bolt; 1/4" X 3/4" 1/4" X 0.75" (Sub For R138749), Bolt; 1/4" X 3/4" (Steel Cleaning Paddle), Bolt; 1/4" X 3/4" (Europe), Bolt; 1/4" X 3/4", (56 Used For 714, 714a; 64 Used For 716, 716a), Bolt; 1/4" X 3/4", (Code 1637), Bolt; 1/4" X 3/4" (Not Illustrated), Cap Screw; 6.350 X 19.050 mm, Bolt; (A) R.Bosch,1/4"X3/4", Bolt; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4" X 3/4", Bolt; 1/4" X 3/4", (4402-4403), Bolt; 1/4" X 3/4" 1/4 X 3/4", Bolt; (A) 6.350 X 19.050 mm (1/4" X 3/4"), Cap Screw; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4", (2 Used, Steel Cleaning Paddle; 84 Used, Bucket), Bolt; 1/4" X 3/4" (4408-4409), Bolt; 1/4" X 3/4", ((3) Less Cab) ((2) Cab), Bolt; 1/4" X 3/4" For Steel Cleaning Paddles, Bolt; 1/4" X 3/4", ((3) Used Less Cab, (2) Used With Cab), Bolt; (C) (D) 1/4" X 3/4", Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Bolt; 6.350 X 19.050 mm (1/4" X 3/4"), Bolt; 1/4" X 3/4" (For Az100822), Bolt; 1/4" X 3/4" (8630), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 96 Used), Bolt; 1/4" X 3/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Bolt; 1/4" X 3/4", (Steel Cleaning Paddle, 2 Used; Bucket, 54 Used)	2
19***51	Cap Screw; 3/8" X 3", (Use With 14h1076), Cap Screw; 3/8" X 3", Full Thread, Cap Screw; 3/8" X 3", Cap Screw; 3/8" X 3", (750), Cap Screw; 3/8" X 3", (700)	2
AA***10	Wiring Harness; Use Without One Half Width Disconnect Drive Only, Wiring Harness, Wiring Harness; (Sub For Aa34924), Wiring Harness; 30 Ft And 36 Ft, (Sub For Aa34924)	1
AD***2R	Bulb; Warning, Bulb; (C: Warning Lamp), Bulb; 32cp (12-16 Volt), Bulb; (Use With Ah133316), Bulb; (12-16 Volt) 32 C.P. (Use With Ar77326), Bulb; (D: Warning) (B), Bulb; Tail (Sub For Ar21737), Bulb; Use With Amber Lamp, Bulb; (Use With Re51341), Bulb; Warning/Turn Lamp, Bulb; 12-16 Volt; 32 Cp, Bulb; (12-16-Volt), Bulb; 32 C.P., Bulb, Bulb; (A) 32 C.P. (Use With Ar77326), Bulb; (12-Volt) (32 Cp), Bulb; (B: Used In High Clearance Model Too), Bulb; (Use When Ar77324 Or Ar77327 Has Been Installed As A Replacement Part), Bulb; (A: Used In Orchard Tractors Too) (B: Used In High Clearance Tractors Too) (C: Use With Re69637), Bulb; (A: Used In Orchard Tractors Too) (B: Used In High Clearance Tractors Too), Bulb; (32 C.P., 12-16 Volt), Bulb; (No. 1156), Bulb; Amber, Bulb; (Sub For Am35170), Bulb; 12-16 Volt, Bulb; 12-Volt, 20 Watt, (Sub For Ch12125 Or M800789), Bulb; 32 Cp, Bulb; (Sub For M800789), Bulb; (16w) (Ge1156), Bulb; (Ge 1156), Bulb; (Also Order (2) R104846 And 57m7258), Bulb; (Use With Ar77326) (1156), Bulb; (12-16 Volt), Bulb; 32 C.P., 12-16 Volt, Bulb; (Sub For Gg420-27106 And Am35170), Bulb; Ge1156, Bulb; (E: Warning) (B), Bulb; (A) (B), Bulb; Warning Lamps, Bulb; (12-Volt) (Use With Ar77326), Bulb; Lamp (Sub For Mg529068), Bulb; Single Contact, Bulb, Bulb; (B) Warning, Bulb; (B), Bulb; (B), Warning, Bulb; (Turn Signal), Bulb; (12-Volt) (32 C.P.), Bulb; (Use With Ar77326) (12-Volt), Bulb; No. 1156, Bulb; (B: Used In High Clearance Tractors Too) (C: Use With Re69637), Bulb; (12-16-Volt) (32 C.P.), Bulb; (Ge1156), Bulb; (12-Volt) (Use With Ar77327), Bulb; Warning Lamp, Bulb; 12-16v, 32cp, Bulb; (32 C.P.) (12-Volt), Bulb; Caution Light (No. 1156), Bulb; 32 Cp; 12-16 Volt, Bulb; (16w), Bulb; (12-16 Volt) (32cp), Bulb; Warning Light, Bulb; Turn Signal, Bulb; 32 C.P. (12-16 Volt) (Use With Ar77326), Bulb; 12-16-Volt, Bulb; (E: Warning) (B) Warning, Bulb; 12 Volt, Bulb; 12 V, 16 W, Bulb; 32 C.P. ( 12-Volt) (Use With Ar77326), Bulb; 12-Volt, Bulb; 12-16 Volt, 32 C.P. (Use With Ar77326), Bulb; Marked 1156, Bulb; 12-16v 32c.P., Bulb; (B: Used In High Clearance Tractors Too), Bulb; (12-16 Volt) (32 C.P.), Bulb; (Marked 1156), Bulb; 1156, Bulb; 12v, 16w, Bulb; 12v 16w, Bulb; Warning, (B), Bulb; 12v,16w, Bulb; Incld In 11, Bulb; (A) Turn Signal And Warning, Bulb; 32 C.P. (12-Volt), Bulb; Replacement, Bulb; 32 Cp (12-16 Volt), Bulb; 32c.P. (12-16 Volt), Bulb; (Amber Lens), Bulb; (Use With Ar77326), Bulb; (C) (Use With Ar77326), Bulb; (Use With Es10785 And Aw23765), Bulb; (B: Used In High Clearance Model Too) (C: Use With Re69637), Bulb; (A: Used In Orchard Model Too) (B: Used In High Clearance Model Too) (C: Use With Re69637), Bulb; Used In Aw23845 And Aw23846, Bulb; 12v, Bulb; (A: Used In Orchard Model Too) (B: Used In High Clearance Model Too), Bulb; (A), Bulb; 12-16v,15c.P., Bulb; Type 1156, (12-Volt), Bulb; (D: Use With Lva14366 Or Lva14365), Bulb; 12-16v,32c.P., Bulb; (Sub For Ch12125 Or M800789), Bulb; 32 C.P. (12-16 Volt), Bulb; (12-Volt), Bulb; 12-16v, 32c.P.	2

See all parts with full part numbers in Heavy Parts AI →

Wheel Frame (For Drawn Disks)

John Deere : 620 - Disk : Wheel Frame (For Drawn Disks)

08***44	Cap Screw; (D: Eight Weights) 5/8" X 8-1/2" (Hs, Head Marked 10.9), Cap Screw; 5/8" X 8-1/2" (Hs, Sae 8), Cap Screw; (C: For 6 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8" X 8-1/2", Cap Screw; 5/8" X 8-1/2", (8 Quik-Tatch Weights), Cap Screw; (A: Number Of Weights) 5/8" X 8-1/2" (8), Cap Screw; (C: Six Weights) 5/8" X 8-1/2", Cap Screw; (C: Six Weights) (E: Used In 5715 Orchard Tractor Too) 5/8" X 8-1/2", Cap Screw; (D: Eight Weights) 5/8" X 8-1/2" (Hs, Head Marked 10.9, Cap Screw; 5/8" X 8-1/2", Cap Screw; (D) 5/8" X 8-1/2" (Hs, Head Marked 10.9), Cap Screw; (A: 8 Weights) 5/8" X 8-1/2", Cap Screw; (D: Eight Weights) 5/8" X 8-1/2", Cap Screw; (D: Eight Weights) 5/8" X 8-1/2" Hs=10.9, Cap Screw; (C: For 6 Weights) 5/8" X 8-1/2", Cap Screw; (D: Eight Weights) 5/8" X 8-1/2" (Hs, Sae 8), Cap Screw; (D) 5/8" X 8-1/2", (Hs, Sae 8), Cap Screw; (D: Counter Weight - 8) 5/8" X 8-1/2", Cap Screw; (A: 8 Quik-Tatch Weights) 5/8" X 8-1/2", Cap Screw; (C: For Six Weights) 5/8" X 8-1/2"	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	6
19***28	Cap Screw; 5/8" X 4" 18'9" And 21'9", Cap Screw; 5/8" X 4", Cap Screw; 5/8"X4", Cap Screw; (R) 5/8" X 4", Cap Screw; 15.875 X 101.600 mm (5/8" X 4") Used Where Light Bracket Attaches, Cap Screw; (B) 5/8" X 4", Cap Screw; 5/8" X 4", (16 X 6 Disk) (8 X 12, 10 X 10 And 7 X 14 Hoe), Cap Screw; (D) 5/8" X 4", Cap Screw; 5/8" X 4" Use With 6" Spacing On S-Tine Models, Cap Screw; (B) 5/8" X 4", (Rear Flange To Flywheel Housing), Cap Screw; 5/8" X 4", (Rigid Models Only), Cap Screw; 5/8" X 4", Upper And Lower Holes (For 6359t Engine), Cap Screw; 5/8"X4, Cap Screw; (B) (C) (D) 5/8" X 4", Cap Screw; 5/8" X 4", (With Markers), Cap Screw; 5/8" X 4", No. 4 Grab Roll, Cap Screw; (B), Cap Screw; (A) 5/8" X 4", Cap Screw; (C) 5/8" X 4", Cap Screw; 5/8" X 4" Main Frame Front, Cap Screw; 5/8" X 4" (For Rigid Models Only), Cap Screw; 5/8"X4" W/Dual-Stage Clutch, Cap Screw; 5/8" X 4" (15'9"), Cap Screw; 5/8" X 4" (A), Cap Screw; 5/8" X 4", (7 X 14 Hoe)	4
AN***26	Bearing Cap; (Includes Key 4), Bearing Cap, Bearing Cap; (Includes Fitting), Bearing Cap; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models), Bearing Cap; (One Used On Drawn Rigid Models) (Two Used On Drawn Flexible Models), Bearing Cap; (One Used On Short Hitch) (Two Used On Long Hitch)	3

See all parts with full part numbers in Heavy Parts AI →

Wheel And Hub (For Drawn Disks)

John Deere : 620 - Disk : Wheel And Hub (For Drawn Disks)

11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	1
14***86	Nut; 3/4" (Sub For 14h902), Nut; 3/4" Hex Slotted, Nut; 3/4", Nut; 3/4" 3/4" Unf Slotted, (Sub For 14h902), Nut; 3/4", (Sub For F2664r), Nut; 3/4" (Hex Slotted), Nut; 3/4" Fine Thread, Nut, Nut; 3/4", (Sub For 14h902) (Use With An280725), Nut; (B) 3/4", Nut; 19.050 mm (3/4"), Nut; 3/4" Unf, Nut; 3/4" Slotted, Nut; 3/4" 3/4", Slotted, (Sub For 14h902), Nut; (B) No. 0.210, Nut; (C: Part Of Ar109180 Adjustable Front Axle) 3/4", Nut; 19.050 mm, 3/4", Nut; 3/4" Unf Slotted, Nut; 3/4", Slotted, Unf, (Sub For 14h902), Nut; 1", Nut; 3/4" 3/4", Nut; 3/4", Unf, (Sub For 14h902), Nut; No 0.210, Nut; 3/4" 3/4", (U/W Standard And Spring Suspension Axles), Nut; 3/4", Slotted, Nut; 3/4", (Sub For 14h902), Nut; 3/4" 3/4", Slotted, Nut; (A) 3/4", Nut; No. 0.210, Nut; (Ord L42080, Al177933, Al177930), Nut; 3/4" Slotted, (Sub For 14h902)	1
AH***17	Seal; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")), Seal; (B), Seal, Seal; (A) (B), Seal; (A)	1
AN***49	Tire Valve Stem; For Tubeless Tire, Tire Valve Stem; (A: Main Frame) (B: Wing Frame), Tire Valve Stem; W/O Calcium Chloride Tubeless, Tire Valve Stem; (Tubeless) (Sub For At37037 (Without Calcium Chloride)), Tire Valve Stem; (7.6 X 15-6 And 11 X 15-8 Tires), Tire Valve Stem; (11l X 15 Tires), Tire Valve Stem; (Tubeless) (Sub For At37037 And At38142), Tire Valve Stem; (Use With Tubeless Tires), Tire Valve Stem; Inside, Tire Valve Stem; (Tubeless) (Sub For At37037), Tire Valve Stem; (C) (For Use With Tubeless Tire On Jd1091 Wheel), Tire Valve Stem; (For 11l-15 Tire), Tire Valve Stem; (11 X 15-8 Tires), Tire Valve Stem; (Use With Lva13909 Rim), Tire Valve Stem; (Use With Jd1091), Tire Valve Stem, Tire Valve Stem; Rear (R4), Tire Valve Stem; (For 9.5l-15 8pr Tire), Tire Valve Stem; (Use With Lva13902 Rim), Tire Valve Stem; (C: (6r, 30"; 6r, 70 cm; 6r, 36, 38, 40"; 8r, , 30";8r, 70 cm, 8r, 36, 38, 40";10r, 30")), Tire Valve Stem; Use With Jd1091 Wheel., Tire Valve Stem; (Use With Jd3043), Tire Valve Stem; (Use With Lva13905)	1

See all parts with full part numbers in Heavy Parts AI →

Need a specific 620 - DISK part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.