John Deerewindrower(no series)

John Deere 580 - WINDROWER

OEM parts breakdown

Search live 580 - WINDROWER parts Source or supply its parts

Post a parts request and compare supplier quotes.

The John Deere 580 Windrower operator's manual describes procedures for operation, handling, lubrication, maintenance, checking, and adjustment.

All 580 - WINDROWER assemblies by section

Every catalogued assembly group for the John Deere 580 - WINDROWER. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

3-Foot Extension [B07]

John Deere : 580 - Windrower : 3-Foot Extension [B07]

03***74	Bolt; 7/16" X 1-1/2", For Rr2 Or Rr4 Cultivator, Bolt; (E) 7/16" X 1-1/2", Bolt; (M) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", Bolt; (N) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", (Through Guard And Clip), Bolt, Bolt; 7/16" X 1-1/2" For Four Wheel Drive Tractors, Bolt; (A) 7/16" X 1-1/2", Bolt; 7/16"X1-1/2", Bolt; 7/16" X 1-1/2" (Use With E64519)	4
03***86	Bolt; (A) 7/16" X 1-1/4", (Sub For Mg88493), Bolt; 7/16" X 1-1/4", (Use With 12h293 And 14h813), Bolt; 7/16" X 1-1/4", Bolt; (F) 7/16" X 1-1/4", Bolt; 7/16"X1-1/4", Bolt; 7/16" X 1-1/4" (Sub For 03h1699)	8
03***51	Bolt; Round Head, Square Neck, 1/2 X 1, Bolt; (A) 1/2" X 1", Bolt; 1/2" X 1", Used With Steel Housing (Illustrated), Bolt; 1/2" X 1", Pump Shield, Bolt; (E) 1/2" X 1", Bolt; 1/2" X 1", Bolt; (B) (C) 1/2" X 1", Bolt; (D) 1/2" X 1", Bolt; 1/2" X 1", (Use With 14h1040 And 12h301), Bolt; (C) (D) 1/2" X 1", Bolt; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2" X 1", Bolt; (B) (C) (D) 1/2" X 1", Bolt; (C) 1/2" X 1", Bolt; (B) 1/2" X 1", Bolt; (D), Bolt; (C), Bolt, Bolt; 1/2"-13 X 3, Bolt; (E), Bolt; 1/2"X1"	2
12***36	Lock Washer; 3/4", (Use With Ar28050 Or Ar28817), Lock Washer; 3/4" 3/4", Lock Washer; 3/4", (Not Required), Lock Washer; (C) 3/4", Lock Washer; 3/4", (Used With Code Af), Lock Washer; (A) 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", 4010 Or 4020 Tractor, Lock Washer; (B: (Xxxxxx- ) Serial No. 8450-00*27; 8650-00*32) 3/4", Lock Washer; 3/4", 2 Used Per Bolt, Lock Washer; (B: Less Rockshaft) 3/4", Lock Washer; 3/4", For Bfa Or Bfa Spring-Tooth, Lock Washer; 3/4", (Use With Code 5513), Lock Washer; 3/4", (12 Used L.H.) (12 Used R.H.), Lock Washer; 3/4", Use Only With Ap31176 Main Frame, Lock Washer; (D) (E) 3/4", Lock Washer; 3/4", 8 To 16 Used, Lock Washer; 3/4", For 4-Row, Lock Washer; 3/4", Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller; 6 Used, 6 Roller), Lock Washer; 3/4", (Without Link Assembly), Lock Washer, Lock Washer; 3/4" (Not Required), Lock Washer; 3/4", For 6-Row, Lock Washer; 3/4" (W/ Dc19550), Lock Washer; 3/4", (Af, Af001), Lock Washer; (B) 3/4", Lock Washer; (A: With Wheel W16x34) 3/4", Lock Washer; 3/4" 18.4-34 R4 Pc Aero, Lock Washer; 19.050 mm, Service Hardware For Motor Shaft, Lock Washer; 3/4", Mainshaft, (Sub For Et10733), Lock Washer; (D) 3/4", Lock Washer; 3/4", Without Axle Extensions, Lock Washer; (A) (B) 3/4", Lock Washer; 19.050 mm, Lock Washer; 3/4", (4 Used, 4 Roller; 5 Used, 5 Roller), Lock Washer; 3/4", 2 Or 4 Used, Lock Washer; 3/4", Lock Washer; 19.050 mm (3/4"), Lock Washer; 3/4", With Axle Extensions, Lock Washer; 3/4", (Ru, Rus), Lock Washer; (B) (C) 3/4", Lock Washer; 3/4", (1 Used-443, 444, 543), Lock Washer; (A: Not Required) 3/4", Lock Washer; 3/4", (Internal Tooth), Lock Washer; 3/4", (With Roll-Gard), Lock Washer; 3/4", (Not Required With Metric Shafts), Lock Washer; (C), Lock Washer; (A) 3/4", (Rs, Ut), Lock Washer; 3/4", (Not Required With E55662), Lock Washer; 3/4", (50, 60, 70 Tractors), Lock Washer; (B) 3/4", (Rc)	2

See all parts with full part numbers in Heavy Parts AI →

Decals [B16]

John Deere : 580 - Windrower : Decals [B16]

AW***27	Decal Kit	1
E5***63	Instruction Plate; (For Power Shaft Shield, Front), Instruction Plate, Instruction Plate; Attaching Procedure, Instruction Plate; (Important: Powr-Gard Instruction), Instruction Plate; Used On Powr-Gard Driveline Only, Instruction Plate; (Powr-Gard Only), Instruction Plate; Important - Power Take-Off Attaching, Instruction Plate; "Instructions" Power-Gard Power Take-Off, Instruction Plate; Instructions, Instruction Plate; (Instruction: Powr-Gard Hook-Up), Instruction Plate; Attaching And Detaching Power Take-Off Powr-Gard, Instruction Plate; Power Take-Off Attaching, Instruction Plate; Power Take-Off Safety, Instruction Plate; Safety, Instruction Plate; Attaching Instructions, Instruction Plate; (Powr-Gard Driveline), Instruction Plate; (Powr-Gard Driveline Only), Instruction Plate; Power Take-Off "Safety", Instruction Plate; "Instructional" - Located On Power Take-Off Cover	1
JD***81	Reflector; "Amber Reflective Marker" Center Vertically On Tube. For 6-, 7- And 8-Btm. On-Land Plows, Reflector; (B), Reflector; 2" X 6.3" Amber, Located On Left And Right Main Frame, Reflector; 2" X 6.3" Amber, Reflector; "Amber Reflective Marker" Center Vertically On Tube, For 8-Btm. And All Tandem Set-Up., Reflector; "Amber Reflective Tape" - On Rear Of Cart, Reflector, Reflector; "Amber Reflective Tape" Centered Vertically On Main Frame Tube, For 9-, 10- And 12-Btms., Reflector; Amber, Front, Reflector; "Amber" - Located On Front Ends Of Toolbar, Reflector; Amber, Reflector; (Amber) (L.H. Side), Reflector; "Amber Reflective Tape" - Located On Top Of Folding Auger And L.H. Front Of Tank, Reflector; Amber 2 X 6.3", Reflector; Amber (Located On Each End Of Lean Bar), Reflector; (312), Reflector; 2" X 6.3" Amber, Located On Front Hinge, Reflector; Amber, (Sub For Ga10405), Reflector; Amber, (Sub For Jd200), Reflector; Amder 2" X 6.3", Reflector; (Amber), Reflector; (Amber) 2" X 6.3", Reflector; "Amber Reflective Marker" Centered Vertically On Main Frame Tube, For 14- And 16-Btms., Reflector; (Sub For Jd200), Reflector; Amber (Not Ilustrated), Reflector; Amber, 2" X 6.3", Reflector; (Sub Jd5905) Amber	3
JD***55	Decals; (C) 4" X 4", Decals; (Sub E82510) "Caution" On Side Shield, Decals; (Sub E82514) ("Caution"), Decals; Implement Caution, Decals; "Caution", (Kit Ah101944), Decals; "Implement Caution Sign", Decals; (Caution: Keep All Shields In Place), Decals; Smv, Decals; "Caution", (Kit Ah101946), Decals; Sign, Implement Caution, Decals; "Caution", (Kit Ah91867), Decals; Sign Implement Caution, Decals; Gear Case, Decals; "Caution", (Kit Ah101943), Decals; Caution - Power Driven Parts, Decals; "Cauton", Decals; "Caution", (Kit Ah101947), Decals; "Caution" Located In Rear, Upper Frame Of Platform, R.H., Decals; Implement Caution (On Hitch), Decals, Decals; (Sub E82510), Decals; "Caution", (For Power Shield, L.H. Side), Decals; (Caution), Decals; Caution, Decals; Sign Implement "Caution", Decals; Implement Caution, (Sub N272923), Decals; "Caution", Decals; "Caution" - For Area Between First Two Steps	1

See all parts with full part numbers in Heavy Parts AI →

Draper Rollers [B04]

John Deere : 580 - Windrower : Draper Rollers [B04]

03***24	Bolt; 5/16" X 1" (Use With 12h303 And 14h785), Bolt; 5/16" X 1", (Use With 12h303 And 14h785), Bolt; 5/16" X 1", (9350 Series Hoe), Bolt; 5/16" X 1" (Regular), Bolt; 5/16" X 1", (Front), Bolt; 5/16"X1", Bolt; 5/16" X 1" (A) (B), Bolt; (A) 5/16" X 1", Bolt; X 5/16" X 1", Bolt; 5/16" X 1" (Use With H76696), Bolt; 5/16" X 1" (Top), Bolt; 5/16" X 1", (675) (Use With Mg622490), Bolt; 5/16" X 1" (Use With 14h785), Bolt; 5/16" X 1", Bolt; (C) 5/16" X 1", Bolt; 5/16" X 1", (675), Bolt; 5/16" X 1" (Carriage Bolt Style Shear Bolt), Bolt; 5/16" X 1" (Use With N10213), Bolt; (B) 5/16" X 1", Bolt; 5/16" X 1", (For 12 Rotary Hoe), Bolt; 5/16" X 1", (12 Rotary Hoe), Bolt; 5/16" X 1", Rd. Hd., Bolt; (Front)	4
11***86	Cotter Pin; (A: Starting From Series Number 625 (06*44- ), 630 (0634- )) 2.500 X 50 mm, Cotter Pin; 2.500 X 50 mm, (Sub For 11h229), Cotter Pin; 2.500 X 50 mm, Cotter Pin; 0.098" X 1.969", Cotter Pin; (A: Up To Series 625 ( -0643), 630 ( -06*33)) 2.500 X 50 mm	4
12***03	Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70*00) 9550sh (-7000)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 7057-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-0087; 4250-0113; 4450-0214) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-0146; 4850-0032) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-0095; 4450-01*85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)	16
14***76	Nut; 3/8", (Pickup Reel), Nut; 3/8" Hs, Sae 8 (Ru), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) 3/8", Nut; 3/8", Top End, Nut; 3/8", (31 Used, 6'; 43 Used, 8'), Nut; (A) (C) (E) 3/8", Nut; 3/8", (3 Used, 662, 672)(5 Used, 673), Nut; 3/8" (Or), Nut; 3/8", (13 Used, 410; 15 Used, 510), Nut; 3/8", (58 Used For 660, 74 Used For 680), Nut; 3/8", (24 And 224 Balers), Nut; 3/8", (Use With T33279), Nut; 3/8"-16unc Hs Sae 8, Nut; 3/8", No. 19 Hitch, Nut; 3/8", (4 Used For 714, 716; 8 Used For 714a, 716a), Nut; 3/8" Hs, Sae 8 (St), Nut; 3/8"-16unc, Nut; 3/8", (Use With Re501713), Nut; 3/8" 3/8"-16unc (Hs, Sae 8), Nut; (A: Use With Ar87205) 3/8", Nut; 3/8", Roll Top, Nut; 3/8" (Radiator Brace Strut), Nut; 3/8" (24 And 224 Balers), Nut; 3/8"-16unc, Hs Sae 8, Nut; (A: ( -Xxxxxx)4560-00*27;4760-0050;4960-0054) 3/8", Nut; 3/8" (Sgb), Nut; 3/8"-16unc (For R108588), Nut; 3/8", (Sub For R53670), Nut; 3/8", (Hs Sae 8), Nut; 3/8" (Hi-Crop), Nut; (B: 2 Used Dual, 3 Used Triple) 3/8", Nut; 3/8" (Sub For Er022066 Appl), Nut; 3/8" 1/2", Nut; 3/8" 3/8"-16 Unc, Nut; 3/8", (Used With Victor Valve), Nut; (B: Hi-Crop) 3/8", Nut; 3/8", (Use With Solid Tire), Nut; 3/8"-16unc (For T25701), Nut; 3/8"-16unc (For R108558), Nut; 3/8"X1-1/4", (For 3179dl001), Nut; 3/8" (Sae 8), Nut; (C: 42" Tire) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 3/8", Nut; 3/8", (56 Used For 714, 714a; 62 Used For 716, 716a), Nut; (B: Less Rockshaft) 3/8" Hs, Sae 8 (2 Used Dual) (3 Used Triple) (4 Used Quad), Nut; 3/8" ((1) Per Spare Shear Bolt), Nut, Nut; 3/8" 3/8"-16unc, Nut; 3/8", (Sub For 14h812), Nut; (A: European Version) (B: Secondary Brake) 3/8", Nut; 3/8" M10, Nut; (A: ( -Xxxxxx) 4650-0134; 4850-0087) 3/8", Nut; 3/8", (Use With Am124305 Front Frame), Nut; 3/8", (Less Metal Detector), Nut; 3/8", (Use With T25701), Nut; (A: With Cab) (B: Isolated Open Operator Station) 3/8" (To Oil Pan Stud), Nut; 3/8", Used With Fiber Glass Seed Hopper, Nut; Hs, Sae 8, 3/8", Nut; 3/8", (3014), Nut; 3/8", For 15'3" Harrow, Nut; 3/8" Sub For 14m7140, Nut; (Hs, Sae 8), Nut; 3/8", (4 Used, 327; 2 Used, 337), Nut; 3/8" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 3/8" (Ru), Nut; (A) (Sub For R53670), Nut; 9.525 mm (3/8"), Nut; (B: (Xxxxxx- ) Esn 4650-3215; 4850-3246) 3/8", Nut; 3/8", (K1) (K2), Nut; 3/8", 730 Tractor, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) 3/8" (E) (G), Nut; (C: 3 Used Triple, 4 Used Quad) 3/8", Nut; (A: Not Required) 3/8", Nut; 3/8" (For T25701), Nut; (B) 3/8", Nut; 3/8"-16unc, (Hs, Sae 8), Nut; (E) 3/8", (Use With At25619), Nut; (A: ( -Xxxxxx) 4055-0051; 4255-0013; 4455-0027) 3/8", Nut; 3/8"Hs Sae 8, Nut; (A: 2 Used 2nd, 3 Used 3rd, 4 Used 4th) 3/8", Nut; (B: (Xxxxxx- ) Serial No. 8450-0019; 8650-0098) 3/8", Nut; 3/8", Nut; 3/8"-16unc, (Use With R108588 Or T25701), Nut; 3/8" (Dh-02), Nut; (B) (C) 3/8", Nut; 3/8"-16unc, For 3179dl016, Nut; 3/8", (28 Used For 714, 714a; 32 Used For 716, 716a), Nut; (A: Included In Ae48634 (335)) (B: Included In Ae48635 (375)) 3/8", Nut; 3/8" Hs, Nut; 3/8", (675), Nut; 3/8", Hs Sae 8, Nut; 3/8"-16unc, (Hs Sae 8), Nut; 3/8", For 10' Harrow, Nut; 3/8", (Sub For K40003, This Application), Nut; 3/8", (With Cab), Nut; 3/8"-16unc (For T33279), Nut; (To Oil Pan Stud), Nut; 3/8", (Use With T33279 And T25701), Nut; 3/8", (Sub R44302), Nut; (A) (B) 3/8", Nut; 3/8" Hi-Crop, Nut; Hs, Sae 8, Nut; 3/8" (To Oil Pan Stud), Nut; 3/8", (Modified 5200 And 5400), Nut; 3/8"X1-1/4", Nut; (A: 3 Used Triple, 4 Used Quad) 3/8", Nut; 3/8", (Twin Swath), Nut; (K) 3/8", Nut; 3/8" Not Illustrated, Nut, Nut; (A: ( -Xxxxxx)4755-0103;4955-0124) 3/8", Nut; 3/8" Hs 8 Sae, Nut; 3/8" 23' And 29' Base, Nut; (A) (C) (E) 3/8", (Use With Solid Tire), Nut; (A: Not Used In U.S. And Canada) (B: Secondary Brake) (G: Used On 4050e And 4250e Only) 3/8", Nut; (A: Rockshaft) 3/8" Hs, Sae 8 (1 Used Dual) (2 Used Triple) (3 Used Quad), Nut; 3/8" 16 Unc, Nut; 3/8", (Ru), Nut; 3/8", For 12' Harrow, Nut; (Sub For 14h812), Nut; 3/8" 3/8" Hs Sae 8, Nut; 3/8", (Sub For 14h1076), Nut; 3/8", United Kingdom, Nut; 3/8", (Bat Reel), Nut; 3/8", For 600 And 610, Nut; 3/8" (336 And 346 Balers), Nut; 3/8", (St), Nut; 3/8", For 400, Nut; 3/8", (24 And 244 Balers), Nut; 3/8", Used On Beet Planter, Nut; 3/8", (Sub K40003, This Application), Nut; 3/8" (W/O Sgb), Nut; 3/8''-16unc, Nut; 3/8", (Use With Ar66424 Or At25619), Nut; (A: With Intelliguard) 3/8", Nut; 3/8" Hs=8, Nut; 3/8", (For 23, 25, 27-Foot Machines), Nut; (D: (Xxxxxx- ) 4055-0087; 4255-0081; 4455-0158) 3/8", Nut; 3/8", (336 And 346 Balers), Nut; 3/8" Unc, Nut; (A: ( -Xxxxxx) Serial No. 4050-0031; 4250-0042; 4450-0266) 3/8", Nut; 9.525 mm, Nut; 3/8", (Sub K40003, This Application Only), Nut; (B), Nut; 3/8" 16unc, Nut; 3/16"-16unc, Nut; 3/8" (United Kingdom Only), Nut; (A) 3/8", Nut; (C: (5210) -3223 (5310) -3388) 3/8", Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 3/8", Nut; 3/8" W/Rg, Nut; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-0013) 3/8", Nut; 3/8", (For 3179dl001), Nut; 3/8", Used With Cast Housing, Nut; 3/8", (United Kingdom Only), Nut; 3/8"X1-1/4", (For 3179dl016), Nut; 3/8", (For 3179dl016), Nut; 3/8", (Sub For 14h812) (2 Used, North America) (1 Used, Europe), Nut; 3/8", (With Iron-Gard), Nut; 3/8", 4020 Or 4010 Tractor, Nut; 3/8", (Hs, Sae 8), Nut; (K: Kit Below Contains All Parts On This Page Marked With A (K):) (A: Kit Below Contains All Parts On This Page Marked With An (A):) 3/8", Nut; (B: 24 And 224 Balers) 3/8", Nut; (A: Included In Ae48634) 3/8", Nut; 3/8" Depth Adjustment, Nut; 3/8, Nut; (Sub For N10215, This Application), Nut; 3/8" (Use With Re501713), Nut; 3/8" Hs Sae 8, Nut; 3/8", (120 Used L.H.) (120 Used R.H.), Nut; 3/8", (Less Cab), Nut; 3/8", (28 Used For 714, 714a; 30 Used For 716, 716a), Nut; 3/8" -16unc, Nut; (D) 3/8", Nut; (E) (C) 3/8", Nut; 3/8", (Power Shift), Nut; 3/8" (Not Required), Nut; 3/8" (Sub 14h785), Nut; 3/8" 3/8"-16unc, (Hs, Sae 8), Nut; 3/8", Lh, Nut; (C: (5210) -3221 (5310) -3391) 3/8", Nut; 3/8", (Sub For 14h812) 5440 Model Only, Nut; (C: (5210) 3224- (5310) 3389-) 3/8" (To Oil Pan Stud), Nut; 3/8", (Illustrated) (Sub For 14h812), Nut; 3/8"-18unc, For 3179dl016, Nut; (A: Lift-Type) (C: Semi-Mount And Offset) (D: 21" X 7" X 12" 16pr Tire) 3/8" (E) (G), Nut; 3/8" (Sub For 14h1076), Nut; (C) 3/8", Nut; (A: ( -Xxxxxx) Serial No. 8450-0018; 8650-00*97) 3/8", Nut; (A) 3/8" Hs, Sae 8, Nut; 3/8", (6 Used For 680), Nut; 3/8" (Sub For R53670), Nut; 3/8", (5 Used, 347; 7 Used, 467), Nut; 3/8" Hs, Sae 8 (Or), Nut; (For T25701), Nut; 3/8" (Hs Sae 8), Nut; 3/8" (B), Nut; 3/8" (A), Nut; 3/8", (Diesel), Nut; (E) 3/8", Nut; 3/8", (6 Used For 660, 8 Used For 680), Nut; 3/8" To Secure Battery Cables To Frame, Nut; 3/8" (34 Harvester), Nut; 3/8", Use With Furrower, Nut; 3/8" (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8" (A) (B), Nut; 3/8", (Illustrated) (Sub For 14h812) 5440 Model Only, Nut; (E) 3/8", (Use With Ar66424), Nut; 3/8", (Use With Ah146250), Nut; 3/8" (Use With 12h304), Nut; (Sub For R53670), Nut; 3/8", For 810, Nut; 3/8" (Hs, Sae 8), Nut; 3/8" (St), Nut; 3/8" Lh, Nut; (A) 3/8" (Marked L41202), Nut; (C: 2 Used Dual; 3 Used Triple; 4 Used Quad) 3/8", Nut; 3/8", (Sub For Mg87432), Nut; 3/8", No. 20 Hitch, Nut; 3/8", (With Metal Detector), Nut; (C: Use With Ar62267, Ar77254, Re41875, Ty6701, Ty6710 Or Ty6713) 3/8" (Sub E55662, This Application), Nut; 3/8", Nut; (A: For Steel Moldboard) 3/8", Nut; 3/8" (Sub E55662, This Application), Nut; 3/8", (Rs), Nut; 3/8", (1 Used, 24 And 224 Balers) (2 Used, 336 And 346 Balers), Nut; 3/8", (Manual), Nut; 3/8"Hs Sae8, Nut; 3/8", L.H., Nut; 3/8" Hs Saeb 8, Nut; (C) 3/8", (Sub E55662, This Application), Nut; 3/8" (Not Used This Application), Nut; 3/8", (16 Used, 6'; 24 Used, 8'), Nut; 3/8" 3/8", Nut; 3/8" (Sub For 14h812)(Included In Kv16190), Nut; 3/8" Hs, Sae 8	2

See all parts with full part numbers in Heavy Parts AI →

Drapers [B06]

John Deere : 580 - Windrower : Drapers [B06]

12***46	Lock Washer; 0.190", (Sub For 19*06 Or 1944), Lock Washer; 0.190", Lock Washer; 0.190", (Sub For R56012), Lock Washer; 0.190" Na, Lock Washer; (F) 0.190", (Use With Ar66424), Lock Washer; (Sub For Ffsb107825), Lock Washer; 0.190", (Sub For T18836), Lock Washer; (K) 0.190", Lock Washer; No 10, Lock Washer; 0.190", (Use With T23462 And T23463), Lock Washer; 0.190", (9 Used On Each Draper), Lock Washer; 0.190", (Sub For 1906 And T18836), Lock Washer; 0.190" (Use With T23460 And T23461), Lock Washer; 0.190", (Sub For 1906), Lock Washer; (C) 0.190", Lock Washer; No. 10, Lock Washer; 0.190", (Sub For 1906) No. 10, Lock Washer; (A) (B) 0.190", Lock Washer; 0.190", Marked 1156, Lock Washer; 0.190", 18 mm (.007"), Lock Washer; 0.190" (Sub For T18836), Lock Washer; 0.190" (Use With T23462 And T23463), Lock Washer; 0.190" 0.190", Lock Washer; N.10, Lock Washer; Ar, No.10, Lock Washer; 0.190", Upper, Lock Washer; 0.190", (3004 And 3005), Lock Washer; 0.190", No. 10, Lock Washer; 0.190", Connector To Field Coil Lead, Lock Washer; 4.826 mm (0.190"), Lock Washer; No.10, Lock Washer, Lock Washer; 0.190", (Sub For 18*58), Lock Washer; 4.826 mm, Lock Washer; 0.190", (Sub For H23195), Lock Washer; 0.190" (Use With T23460 And T23461 And Ar72960), Lock Washer; 0.190", (Sub R122848), Lock Washer; 0.190" (A), Lock Washer; No10, Lock Washer; 0.190", (Sub For Ffsb107825), Lock Washer; 0.190", (Use With T23460 And T23461), Lock Washer; (F) 0.190", (Use With At25619), Lock Washer; Connector To Field Coil Lead, No. 10, Lock Washer; 0.190", (Sub For Mg80684), Lock Washer; 0.190" (Use With T23460, T23461 And Ar72960), Lock Washer; 0.190", (Use With R70407, R72817, R72818), Lock Washer; 0.190" (Switch Terminal) (Use With Ar66494), Lock Washer, Lock Washer; 0.190", (Use With T23460, T23461 And T23463), Lock Washer; 0.190", (Sub For A767r), Lock Washer; (B) 0.190", Lock Washer; 0.190", Lock Washer; 0.190", (Sub For Ty4169), Lock Washer; 0.190", (Gasoline), Lock Washer; 0.190", (Sub For T11740), Lock Washer; 0.190", (Nla), Lock Washer; 0.190" (Use With Am53945), Lock Washer; 0.190", (Use With Ar11109 Or Ar11116), Lock Washer; 10, Lock Washer; (A) No.10, Lock Washer; (A) 0.190", (Sub For T11740), Lock Washer; (B) No.10, Lock Washer; 0.190", (Sub For M80684), Lock Washer; 0.190" (Use With T23460, T23461 And T23463), Lock Washer; 0.190" (Use With R70407, R72817, R72818), Lock Washer; (A) No. 10, Lock Washer; 0.190" (Use With Ar72960, T23460 And T23461), Lock Washer; (A) (B) (C) 0.190", Lock Washer; (A) 0.190", Lock Washer; Ar, No. 10, Lock Washer; 0.190", No.10, Lock Washer; 4.826 mm (0.190"), Lock Washer; 0.190" (Use With Mg279927), Lock Washer; (A) No 10, Lock Washer; 0.190" (404dh-03)	18
14***78	Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01*00; 4255-0100; 4455-0200) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-0030; 8760-0021; 8960-00*36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 10	18
21***56	Screw; No. 10 X 1-1/4", Screw; 0.190" X 1-1/4", (9 Used On Each Draper), Screw; No.10 X 1-1/4", Screw; No.10x1-1/4", Screw; 0.190" X 1-1/4", (Sub For Ty5047), Screw; 0.190" X 1-1/4", (For 6359t Engine), Screw; No. 10x1-1/4", Screw; 0.190" X 1-1/4", For Ty2360, Screw; 4.826 X 31.750 mm, Screw; 0.190" X 1-1/4" (Use With 14h778), Screw; No. 10 X 1-1/4", For 3179dl001, Screw; 0.190" X 1-1/4", Used With Red And Amber Reflectors, Screw; No. 10 X 1-1/4", For 3179dl016, Screw; 0.190" X 1-1/4", Screw; No.10x1-1/4" (Sub For 21h1342), Screw; (A) Nr. 10 X 1-1/4", Screw; No.10-1/4", Screw; 0.190" X 1-1/4", Screw; (D) 0.190" X 1-1/4"	18
AH***4H	Kit; 1/2 Lb. Pkg. (Rivet Is 3/16 X 9/16), Kit; (4 Oz. (113 G) Pkg.), Kit; 1/2 Lb. Pkg. (3/16 X 9/16), Kit; 1/2 Lb. Pkg (3/16" X 9/16"), Kit; (4 Oz. Package), Kit; (113 G (4-Ounce) Pkg.), Kit	1

See all parts with full part numbers in Heavy Parts AI →

Drive Belts [A16]

John Deere : 580 - Windrower : Drive Belts [A16]

12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	4
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	6
19***11	Cap Screw; 1/2" X 5", (Use With R49722), Cap Screw; 1/2"X5", Cap Screw; 1/2" X 5" Upper, Cap Screw; 1/2" X 5" (A), Cap Screw; 1/2" X 5", Cap Screw; 7/8"X3", Cap Screw; 1/2" X 5" (Upper), Cap Screw; 1/2" X 5", (Sub 19h2120), Cap Screw; 1/2" X 5", (Use With Adjustable Gauge Wheel), Cap Screw; 1/2" X 5" (Not Used With Fenders), Cap Screw; 1/2" X 5", (With Two Spacers), Cap Screw; (B: Ar107921 - Input Yoke Parts) 1/2" X 5", Cap Screw; 1/2" X 5", (Use With Adjustable Gauge Wheels), Cap Screw; 1/2" X 5"	2
24***27	Washer; 13/16"X17/32"X.060", Washer; 17/32"X13/16"X.060 (Sub For T28324), Washer; 17/32" X 13/16" X 0.060", (Kit Ar69585 And Ar73922), Washer; (A) 17/32"X13/16"X.060", Washer; 17/32"X13/16"X.060" (Sub For T28324), Washer; 17/32" X 13/16" X 0.060", (Kits Ar69585 And Ar73922), Washer; (B) 17/32" X 13/16" X 0.060", Washer, Washer; 17/32" X 13/16" X 0.060, Washer; 17/32" X 13/16" X 0.060", Washer; (B) 17/32"X13/16"X.060", Washer; 17/32"X13/16"X.060", Washer; 17/32" X 13/16" X 0.060", Kit Ar69585 And Ar73922, Washer; 17/32" X 13/16" X 0.060", (Use With T25653), Washer; 17/32"X13/16"X.060, Washer; 17/32"13/16"X.060", Washer; 17/32" X 13/16" X 0.060", (Sub Pt11383), Washer; 17/32"X13/16"X0.60", Washer; 17/32" X 13/16" X 0.060" (Sub Pt11383), Washer; (A) 17/32" X 13/16" X 0.060", Washer; 17/32"X13/16x.060 (Sub For T28324), Washer; (C) 17/32" X 13/16" X 0.060", Washer; (E) 17/32" X 13/16" X 0.060", Washer; 17/32" X 13/16" X 0.060", Sub Pt11383, Washer; 13.487 X 20.625 X 1.524 mm, Washer; 17/32"X13/16" (Sub For T28324), Washer; 17/32"X13/16"X0.060" (Sub Pt11383), Washer; 17/32" X 13/16" X .060", Washer; (A) (B) (C) 17/32" X 13/16" X 0.060", Washer; 17/32" X 13/16" X 0.060" (R), Washer; 17/32" X 13 16" X 0.060", Washer; 17/32" X 13/16 X 0.060", Washer; 17/32"X13/16"X.060."	2

See all parts with full part numbers in Heavy Parts AI →

Drive Frame [A14]

John Deere : 580 - Windrower : Drive Frame [A14]

03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	6
03***31	Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/2", Wide Front, Bolt; 1/2" X 1-1/2", Rd. Hd., Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-1/2", (Use With Ae37450), Bolt; 1/2" X 1-1/2", (3.7 M (12-Ft.), 7 Used) (4.3 M (14-Ft.), 9 Used), Bolt; 1/2" X 1-1/2" Wide Front, Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" L.H., Bolt; 35/64" X 27/32" X 3/8", Bolt; 1/2"X1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Rigid), Bolt; 1/2" X 1-1/4", Bolt; 1/2" X 1-1/2" Lh, Bolt; 1/2" X 1-1/2" (213-5 Used; 215 And 216-6 Used; 218-7 Used; 220, 222, 224-8 Used)	3
11***85	Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480"	2
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	1

See all parts with full part numbers in Heavy Parts AI →

Driveline [A12]

John Deere : 580 - Windrower : Driveline [A12]

19***21	Cap Screw; 5/16" X 3-1/4", (Af001 Only), Cap Screw; 5/16"X4", Cap Screw; 5/16"X3-1/4", Cap Screw; 5/16" X 3-1/4", Cap Screw; 5/16" X 3-1/4", (Single), Cap Screw; 5/16" X 3-1/4", (Relay And Fuse Holder Bracket To Oil Cooler Cover), Cap Screw; 5/16" X 3-1/4", 3106, Cap Screw; 5/16" X 3-1/4" (Relay And Fuse Holder Bracket To Oil Cooler Cover), Cap Screw; 5/16" X 3-1/4", (3107), Cap Screw; 5/16" X 3-1/4", 2 Used With Tube Support On Motor End Of Auger Tube Only, Cap Screw; 5/16" X 3-1/4", (3106), Cap Screw; 5/16" X 3-1/4", (Shear Bolt), Cap Screw; 5/16" X 3-1/4", Cover)	2
2***0	Shaft Key; 5/16 X 1-1/8, Shaft Key; 5/16" X 1-1/8", Shaft Key; 5/16" X 1-1/8", (Sub For 26h27)	2
34***86	Spring Pin; (A) 1/4" X 2", Spring Pin; 1/4" X 2", (Twin Swath), Spring Pin, Spring Pin; 1/4" X 2", Spring Pin; 1/4"X2", Spring Pin; 1/4" X 2", Per Tooth Bar, Spring Pin; 1/4" X 2", 540 Rpm, Spring Pin; 1/4" X 2" Model 8w, 10w, 10n And 12n, Spring Pin; 1/4" X 2" " (For Dc24381), Spring Pin; (A) (1 Used On 456)(2 Used On 556), Spring Pin; 1/4" X 2", Std, Spring Pin; 1/4" X 2", (4.3 M (14-Ft.) (4.9 M (16-Ft.) Platforms, Spring Pin; (A) 1/4" X 2", (Sub Aa21292), Spring Pin; (A: 446( - 13*93) 546( - 13*73)) 1/4" X 2" (1 Used On 446)(2 Used On 546), Spring Pin; 6.350 X 50.800 mm (1/4" X 2"), Spring Pin; 1/4" X 2", (For Adjustable Thread), Spring Pin; (A) 1/4"X2", Spring Pin; 1/4" X 2" (For Dc24381), Spring Pin; 1/4" X 2", (540 Rpm), Spring Pin; (A) (1 Used On 466)(2 Used On 566)	1
AE***16	Cross And Bearing As; (Sub For Am39093), Cross And Bearing As; Kit, Center Parts, Cross And Bearing As; (Sub For Am2871e), Cross And Bearing As, Cross And Bearing As; (Sub For Aw12495 And Am2871e), Cross And Bearing As; (A) (Sub For Am39093), Cross And Bearing As; Connection With Bearings	3

See all parts with full part numbers in Heavy Parts AI →

Hitch [A06]

John Deere : 580 - Windrower : Hitch [A06]

03***57	Bolt; X 3/8" X 1", Bolt; (A) 3/8"X1-1/4" 13.6-24 Or 12.4-28, Bolt; 3/8" X 1-1/4", Bolt; 3/8" X 1-1/4" (Use With 14h812), Bolt; 3/8" X 1-1/4" (913-4 Used; 915-5 Used; 918-6 Used; 920, 922, And 924-7 Used; 925-8 Used; 930-10 Used), Bolt; 3/8"X1-1/4", Bolt; 3/8" X 1-1/4", (R.H. Footrest To Brake Valve), Bolt; 3/8" X 1-1/4" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, And 224-7 Used), Bolt; 3/8" X 1-1/4" Lh, Bolt; 3/8" X 1-1/4", (40-Foot Boom), Bolt; 3/8" X 1-1/4", (344,-2000)(443,-4500)(444,-11000)(546/ 644/645/842/843, -1500)(642,-500) (643,-4000), Bolt; 3/8" X 1-1/4" (Sub For 03h1500), Bolt; 3/8" X 1-1/4" (Use With 12h304 And 14h812), Bolt, Bolt; 3/8" X 1-1/4", Round Head, Bolt; 3/8" X 1-1/4", (483), Bolt; 3/8" X 1-1/4", (Level Land), Bolt; 3/8" X 1-1/4" (Use With Bp12233), Bolt; 3/8" X 1-1/4" (Sub For 03h1840), Bolt; 3/8" X 1-1/4", Use With E77640	1
11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	5
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	3
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	3

See all parts with full part numbers in Heavy Parts AI →

Hydraulic Circuit [B09]

John Deere : 580 - Windrower : Hydraulic Circuit [B09]

11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	2
12***93	U-Bolt; 7/16", For 15'3" Harrow, U-Bolt; 7/16" (Rear Location), U-Bolt; (A: Rockshaft) 7/16" (2 Used Dual) (4 Used Triple) (6 Used Quad), U-Bolt; (A) 11.113 mm (7/16"), U-Bolt; 7/16" (Use With 19h2731), U-Bolt; 7/16", 12a Section, U-Bolt; 7/16" 19h2731, U-Bolt; 7/16", Seat Belt Caution, U-Bolt; 7/16" (Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 12b Section, U-Bolt; 7/16", (Use With 19h2731), U-Bolt; 7/16", U-Bolt; 7/16", (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 6 Section, U-Bolt; 7/16" (4 Used Tow Between; 2 Used Tow Behind), Lock Washer; 7/16", U-Bolt; (B: For 7250) 7/16", U-Bolt; 11.113 mm, (Use With Ar76006) (Dual), U-Bolt; 7/16" (Front Location), U-Bolt; 7/16" (19h2731), U-Bolt; 7/16", (Code 6204 And 6205), U-Bolt; 7/16", 6203 And 6216, U-Bolt; (Front Location), U-Bolt; 7/16", For 6-Row, U-Bolt; (A) 7/16", U-Bolt; (C) 7/16", U-Bolt; 7/16" (A), U-Bolt; 7/16", (Single), U-Bolt; 11.113 mm (7/16"), U-Bolt; 7/16", (Sub For Mg81547), U-Bolt, Lock Washer; 7/16", (Sub For J219167), U-Bolt; 7/16", 494 And 495 Only, U-Bolt; 7/16" (4 Used Triple) (6 Used Quad), U-Bolt; 7/16", (Code 7001, 7002, 7003, And 7004), U-Bolt; 7/16", (Sub For M800883), U-Bolt; 7/16", (Af), U-Bolt; (Sub F16203), Washer; (Sub For J219167), U-Bolt; 7/16", (810), U-Bolt; 7/16" (No Longer Required With 19h3104), U-Bolt; 7/16", 12', 13', 15' Aw; 12'6', 13'10" Awr; 13'4" Awrs; 12', 13', 14' Aws, U-Bolt; 7/16" Not Used This Application, Lock Washer, U-Bolt; 7/16" (B) (C) (D), U-Bolt; 11.113 mm, U-Bolt; 7/16", (No Longer Required With 19h3104), U-Bolt; 7/16", (No Longer Required), U-Bolt; 7/16" (W/ Ae33347), U-Bolt; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16", U-Bolt; (B) 7/16", U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple) (16 Used Quad), U-Bolt; 7/16" Ar, U-Bolt; 7/16" (5830), U-Bolt; (A: Used In High Clearance Tractors Too) 7/16", U-Bolt; 7/16", (Code 6204), U-Bolt; (A) (B) (C) 7/16", U-Bolt; 7/16" (12 Used Triple) (16 Used Quad), U-Bolt; 7/16", For 5 Section, U-Bolt; 7/16", 3010, 3020, 4010, Or 4020 Tractors, U-Bolt; 7/16" (Not Used This Application), U-Bolt; 7/16", 8', 9' Aw And 9', 11' Aws, U-Bolt; 7/16" (Nlr), U-Bolt; 7/16", (No Longer Required With 19h1304), U-Bolt; 7/16", (4 Used Single, 8 Used Dual, 12 Used Triple), U-Bolt; 7/16", (Rear Location), U-Bolt; (A) (B) (C) (D) 7/16", U-Bolt; 7/16", (400), U-Bolt; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16", U-Bolt; 7/16", 12b Section, U-Bolt; (A: Standard For Usa, Option For Other Countries) 7/16", U-Bolt; 7/16", (Use With 466d), U-Bolt; 7/16", Category 3, U-Bolt; 7/16", (Sub For Et11429), U-Bolt; (A: Used In High Clearance Tractors) 7/16", U-Bolt; (B: For 7200) 7/16", U-Bolt; 7/16" (No Longer Required), U-Bolt; 7/16", (600, 610), U-Bolt; (C: Incld In Cb11468282 And Cb11483634 Flange Fitting) 7/16", U-Bolt; (B: For 7850) 7/16", U-Bolt; 7/16" (Lh Coupler), U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 10' And 12' Harrows, U-Bolt; 7/16" (12 Used Triple) (7 Used Dual), U-Bolt; 7/16", (No Longer Required With 19h3104 Or 19h2731), Lock Washer; 11.113 mm (7/16"), Lock Washer; (Sub For J219167), U-Bolt; 7/16", For 7 Section, U-Bolt; 7/16", 11' Aw And 11'2" Awr, U-Bolt; 7/16" For Four Wheel Drive Tractors, U-Bolt; 7/16", For 12a Section, U-Bolt; 7/16" (Use With R140849), U-Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) 7/16", U-Bolt; 7/16", (Tf-01), U-Bolt; 7/16" (Sub For J219167), U-Bolt; 7/16", (No Longer Required W/19h3104), U-Bolt; (Use With 19h2731), U-Bolt; (A: Used In 5415 And 5715 Orchard Tractors) 7/16"	1
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	2
14***39	Nut; 5/8" 1.68m (5.5 Ft.), Nut; 5/8" Incld In 3, Nut; (A) (B) (C) 5/8", Nut; 5/8", 431, Nut; (A: Number Of Weights) 5/8" 6 Or 8.(5/8"), Nut; 5/8", (Use With R27818), Nut; 5/8", For 15'3" Harrow, Nut; (A: Number Of Weights) 5/8" 6 Or 8, (5/8"), Nut; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Nut; 5/8" (Sub For Eer022067, Appl), Nut; 5/8", (Use With R71697), Nut; 5/8", (4020 Tractors)(4884), Nut; 5/8", 4010 And 4020 Tractor, Nut; 5/8" Except 15.5-38 Tire, Nut; 5/8", (Use With N136904), Nut; (A) 5/8", For 6w, Nut; 5/8" (Or, Rc, Ru, Ut), Nut; 5/8", (24" Wheel), Nut; (Regular), Nut; (A: 762 mm (30") Wheel) (C: Also Includes Sn:) 5/8", Nut; 5/8", Nut; 5/8" (A) (B), Nut; (A: Two Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 3/8" (Sub For 14h760), Nut; 5/8", A=26,5mm, Nut; 5/8", (Use With Ar40767), Nut; 5/8" (D), Nut; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Nut; 5/8" (844,-61*45; 1243,-62*76), Nut, Nut; (B) (C) 5/8", Nut; 5/8" (Or, Rs, Ut), Nut; (Ou)5/8", Nut; (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 5/8", Nut; 5/8" (Sub P50273), Nut; 5/8", (540 Or 1000 Rpm), Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) 5/8", Nut; 5/8" Rigid/Rigid Fold, Nut; (D) 5/8", Nut; 5/8", (Use With Ar94537), Nut; (D: For 4.0 M (13'5") Size) 5/8", Nut; (A) (C) 5/8", Nut; 15.875 mm, Nut; 5/8", For 465, Nut; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Nut; (A: 762 mm (30") Wheel) 5/8", Nut; (A: Number Of Weights) 5/8" 6 Or 8, Nut; 5/8", 631, Nut; (A) 5/8", (Or, Rs, Ru, Rus, Ut), Nut; 5/8" L.H., Nut; 5/8" Hs, Sae 8, Nut; (A: For 2.8 M (9'2") Size) (B: For 3.2 M (10'7") Size) 5/8", Nut; (A) (D) (E) 5/8", Nut; (B: Four Weights) 5/8" 24", 28", 30", 38" Tire, Nut; 5/8", With B31967 In Lowest Position, Nut; 5/8", (Sub For Mg84947), Nut; 5/8", Nut; 5/8", (9) On 54-In., (11) On 60-In., (10) On 66-In., Nut; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Nut; 5/8" (C) (D), Nut; 15.875 mm (5/8"), Nut; 5/8", (30" Drive Wheel Spacers), Nut; (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 5/8", Nut; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Nut; 5/8" (Sub For (2) Mg85700693), Nut; 5/8", (For 5 X 7 Frame), Nut; 5/8" (Hs, Sae 8), Nut; 5/8" (Sub For 14h760), Nut; 5/8", (Hs-Sae 8), Nut; (A) 5/8", Nut; (A: For Outside Mounting Of Tool Box) 5/8", Nut; 5/8" 1.83m (6 Ft.) And 2.13m (7 Ft.), Nut, Nut; (B) 5/8", Nut; 5/8" (44 Ft), Nut; (F) 5/8", Nut; (H: Hydraulic Fold Only.) 5/8", Nut; 5/8", (Ut), Nut; 5/8", L.H., Nut; 5/8" 1 Per Wheel With More Than One Weight, Nut; 5/8" 5/8", Nut; 5/8" (Use With Bm18221, Bm18222, Bm11598, Bm18223 Or Bm18224), Nut; 5/8", 1 Per Wheel With More Than One Weight, Nut; 5/8", For Bf Or Bft, Nut; 5/8", For 445, Nut; (B: 965 mm (38") Wheel) (C: Also Includes Sn:) 5/8", Nut; 0,625", Nut; (A) (D) 5/8", Nut; 5/8-In., Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (C) 5/8", Nut; (C: Six Weights) 5/8" 24", 28", 30", 38" Tire, Nut; (A: Number Of Weights) 5/8" (5/8") 6 Or 8, Nut; 5/8" (Sub For Er022067 Appl), Nut; (5/8"), Nut; (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 5/8", Nut; (B) 9/16", Nut; (C: Also Includes Sn:) 5/8", Nut; 5/8", (30" Offset Cross Auger), Nut; (A) 5/8", For Tractor Fender Bolt, Nut; 5/8" (Use With 1.83m (6') And 2.13m (7')), Nut; 5/8" 30, 32, 40 And 42 Ft, Nut; (A) 6 Or 8, (5/8"), Nut; (D) (E) 5/8", Nut; (E) (A) 5/8", Nut; (Sub For 14h760), Nut; 5/8" 5/8”, Nut; (C) (D) 5/8", Nut; (B) (C) (D) 5/8", Nut; 5/8" (Sub For Mg85700693), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) 5/8", Nut; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-7 Used), Nut; 5/8" (Disk), Nut; 5/8", Auxiliary Hydraulic System, Nut; 5/8", (Rigid Mounting), Nut; 5/8", (4 Used, 12, 15, 18, 21, And 25 Ft.) (2 Used Twin Swath), Nut; (D: Eight Weights) 5/8" 28", 30", 38" Tire, Nut; (B: 965 mm (38") Wheel) 5/8", Nut; 9/16", Nut; 5/8" (Sub For Er022067, Appl), Nut; (E) 5/8", Nut; 5/8", (Sub For 14h760), Nut; (C) (D) (E) 5/8", Nut; 5/8" (A), Nut; 5/8" Hs=8, Nut; 5/8", (Sub For Mg280374 Or 14h760), Nut; (A) (B) 5/8", Nut; 5/8", (Use With R71696), Nut; 5/8", (Use With Ar94535), Nut; 5/8" Unc 2b, Nut; 5/8", (Rs), Nut; 5/8", (4 Per Side), Nut; 5/8" Unc 28, Nut; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 14m7276), Nut; (A: Number Of Weights) 5/8", Nut; (A: Counter Weight - 2) (B: Counter Weight - 4) 5/8", Nut; 5/8" (Rc), Nut; 5/8", R.H. Thread, Nut; 5/8" (Use With 1.68m (5.5')), Nut; 5/8" (2150, 2255), Nut; 5/8" (Use With 19h2133)	4

See all parts with full part numbers in Heavy Parts AI →

Jack Stand [A05]

John Deere : 580 - Windrower : Jack Stand [A05]

AW***61	Jack	1
M4***09	Compression Spring	1
R2***71	Snap Ring; (A) (Sub For P44982), Snap Ring, Snap Ring; (A), Snap Ring; (A: From Sr.No 5310s(00*84- ), 5410 (0019- ), 5610 (0001- ).), Snap Ring; (C: Triple), Snap Ring; (Sub For R38126 Or P44982), Snap Ring; (A: Cab) (B: Open Operator'S Station), Snap Ring; (For Al57553), Snap Ring; (A: Collarshift Transmission (5220) Sn -4210 (5320) Sn -4306), Snap Ring; (Sub For P44982), Snap Ring; (Ord Al154379), Snap Ring; (Order Al154379), Snap Ring; (B: Dual), Snap Ring; (B) (Sub For P44982), Snap Ring; (A: Collarshift Transmission (5420) Sn -4412 (5520) Sn -45**03), Snap Ring; (For Al57552), Snap Ring; (For L56917), Snap Ring; (Sub For Na6882), Snap Ring; (Hi-Lo Shift) (Sub For P44982)	1
W3***41	Plunger	1

See all parts with full part numbers in Heavy Parts AI →

Knife Drive [A18]

John Deere : 580 - Windrower : Knife Drive [A18]

03***99	Bolt; (A) (B) 1/2" X 1-1/2", Bolt; (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", Used With Steel Housing, Bolt; 1/2" X 1-1/2" (Sub For 03h1746), Bolt; 1/2" X 1-1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", For Use With Outside Sections, Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), (3 Used With Corn Head; 4 Used With Cutting Platform), Bolt; (E), Bolt; 1/2" X 1-1/2" Includes Jd7759 And At216076, Bolt; (A: Include In Cb11415851 Retainer Kit) 1/2" X 1-1/2", Bolt; (C) (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (3 Used, With Corn Head; 4 Used, With Cutting Platform), Bolt; 1/2" X 1-1/2", (Use With 14h1040 And 12h301), Bolt; (B) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Disk Covers Only), Bolt; (B) (C) (D) 1/2" X 1-1/2", Bolt; (B) (C) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2" (913-10 Used; 915-12 Used; 918- 14 Used; 920, 922, 924-16 Used; 925-19 Used; 930-22 Used), Bolt; 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", For Outside Section, Bolt; (F) 1/2" X 1-1/2", Center Strap Only, Bolt; 1/2" X 1-1/2" (213-10 Used; 215 And 216-12 Used; 218- 14 Used; 220, 222, 224-16 Used; 230- 22 Used), Bolt; 1/2" X 1-1/2" (Use With E64519), Bolt; 12.700 X 38.100 mm, Bolt; 1/2" X 1-1/2", Disk Coverer Only, Bolt; (E) 1/2" X 1-1/2", Bolt, Bolt; 1/2" X 1-1/2" (Sub For 0051376099), Bolt; (D) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With 12h301 And 14h1040), Bolt; (D), Bolt; (A) 1/2" X 1-1/2", Bolt; 1/2" X 1-1/2", (Use With N137806), Bolt; (C) (B) 1/2" X 1-1/2", Bolt; 12.700 X 38.100 mm (1/2" X 1-1/2"), Bolt; 1/2" X 1-1/2" (Use With 12h301 And 14h1040), Bolt; 12.700 X 38.100 mm, Incld In A, Bolt; 1/2"X1-1/2", Bolt; 1/2" X 1-1/2", (282), Bolt; 1/2" X 1-1/2" (Use With 14h1040 And 12h301)	2
03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	6
08***51	Cap Screw; (A) 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plow, Cap Screw; 5/8" X 7-1/2", 405 mm (16") Plows	1
11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	1

See all parts with full part numbers in Heavy Parts AI →

Knife, Sections, Guards And Hold Down Clips [A20]

John Deere : 580 - Windrower : Knife, Sections, Guards And Hold Down Clips [A20]

03***74	Bolt; 7/16" X 1-1/2", For Rr2 Or Rr4 Cultivator, Bolt; (E) 7/16" X 1-1/2", Bolt; (M) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", Bolt; (N) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", (Through Guard And Clip), Bolt, Bolt; 7/16" X 1-1/2" For Four Wheel Drive Tractors, Bolt; (A) 7/16" X 1-1/2", Bolt; 7/16"X1-1/2", Bolt; 7/16" X 1-1/2" (Use With E64519)	0
03***86	Bolt; (A) 7/16" X 1-1/4", (Sub For Mg88493), Bolt; 7/16" X 1-1/4", (Use With 12h293 And 14h813), Bolt; 7/16" X 1-1/4", Bolt; (F) 7/16" X 1-1/4", Bolt; 7/16"X1-1/4", Bolt; 7/16" X 1-1/4" (Sub For 03h1699)	0
14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	0
16***42	Rivet; (G) 13/64" X 5/8", Rivet; 13/64" X 5/8", Rivet; (A) 13/64" X 5/8"	0

See all parts with full part numbers in Heavy Parts AI →

L.H. Reel Lift Cylinder [B13]

John Deere : 580 - Windrower : L.H. Reel Lift Cylinder [B13]

AH***57	Kit; (Sub For Ah87266) Includes Parts Marked (A), Kit; (A), Kit; (Sub For Ah63869, Ah87266) Seal Repair, Kit; Seal Repair, (Sub For Ah87266 And Aw20750), Kit, Kit; For Cylinder Aw25011, (Sub For Ah87266), Kit; (A) (Sub For Mg279640 Or H63859), Kit; (Use With Aw24044) (Sub For Ah87266), Kit; (K) Teflon, (Sub For Mg129988 Or H63859), Kit; (K) 31.8mm (1-1/4" Id) (Sub For H63858), Kit; (Sub For Ah87266) Seal Repair, Kit; (A) (Sub For H63859)	1
AW***47	Cylinder; 18 Ft. (5.5m) (Sub Aw22736, Aw22738, Aw22739, W34011 And 14h1039), Cylinder; 25 Ft. (7.6m) (Sub Aw22736, Aw22738, Aw22739, W34011 And 14h1039), Cylinder; 21 Ft. (6.4m) (Sub Aw22736, Aw22738, Aw22739, W34011 And 14h1039)	1
AW***36	Hydraulic Cylinder; 25 Ft. (7.6m), Hydraulic Cylinder; 18 Ft. (5.5m), Hydraulic Cylinder; 21 Ft. (6.4m)	1

See all parts with full part numbers in Heavy Parts AI →

Main Frame [A08]

John Deere : 580 - Windrower : Main Frame [A08]

03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	3
12***93	U-Bolt; 7/16", For 15'3" Harrow, U-Bolt; 7/16" (Rear Location), U-Bolt; (A: Rockshaft) 7/16" (2 Used Dual) (4 Used Triple) (6 Used Quad), U-Bolt; (A) 11.113 mm (7/16"), U-Bolt; 7/16" (Use With 19h2731), U-Bolt; 7/16", 12a Section, U-Bolt; 7/16" 19h2731, U-Bolt; 7/16", Seat Belt Caution, U-Bolt; 7/16" (Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 12b Section, U-Bolt; 7/16", (Use With 19h2731), U-Bolt; 7/16", U-Bolt; 7/16", (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 6 Section, U-Bolt; 7/16" (4 Used Tow Between; 2 Used Tow Behind), Lock Washer; 7/16", U-Bolt; (B: For 7250) 7/16", U-Bolt; 11.113 mm, (Use With Ar76006) (Dual), U-Bolt; 7/16" (Front Location), U-Bolt; 7/16" (19h2731), U-Bolt; 7/16", (Code 6204 And 6205), U-Bolt; 7/16", 6203 And 6216, U-Bolt; (Front Location), U-Bolt; 7/16", For 6-Row, U-Bolt; (A) 7/16", U-Bolt; (C) 7/16", U-Bolt; 7/16" (A), U-Bolt; 7/16", (Single), U-Bolt; 11.113 mm (7/16"), U-Bolt; 7/16", (Sub For Mg81547), U-Bolt, Lock Washer; 7/16", (Sub For J219167), U-Bolt; 7/16", 494 And 495 Only, U-Bolt; 7/16" (4 Used Triple) (6 Used Quad), U-Bolt; 7/16", (Code 7001, 7002, 7003, And 7004), U-Bolt; 7/16", (Sub For M800883), U-Bolt; 7/16", (Af), U-Bolt; (Sub F16203), Washer; (Sub For J219167), U-Bolt; 7/16", (810), U-Bolt; 7/16" (No Longer Required With 19h3104), U-Bolt; 7/16", 12', 13', 15' Aw; 12'6', 13'10" Awr; 13'4" Awrs; 12', 13', 14' Aws, U-Bolt; 7/16" Not Used This Application, Lock Washer, U-Bolt; 7/16" (B) (C) (D), U-Bolt; 11.113 mm, U-Bolt; 7/16", (No Longer Required With 19h3104), U-Bolt; 7/16", (No Longer Required), U-Bolt; 7/16" (W/ Ae33347), U-Bolt; (A: Radar Bracket To Transmission Lube Housing Screw) 7/16", U-Bolt; (B) 7/16", U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple) (16 Used Quad), U-Bolt; 7/16" Ar, U-Bolt; 7/16" (5830), U-Bolt; (A: Used In High Clearance Tractors Too) 7/16", U-Bolt; 7/16", (Code 6204), U-Bolt; (A) (B) (C) 7/16", U-Bolt; 7/16" (12 Used Triple) (16 Used Quad), U-Bolt; 7/16", For 5 Section, U-Bolt; 7/16", 3010, 3020, 4010, Or 4020 Tractors, U-Bolt; 7/16" (Not Used This Application), U-Bolt; 7/16", 8', 9' Aw And 9', 11' Aws, U-Bolt; 7/16" (Nlr), U-Bolt; 7/16", (No Longer Required With 19h1304), U-Bolt; 7/16", (4 Used Single, 8 Used Dual, 12 Used Triple), U-Bolt; 7/16", (Rear Location), U-Bolt; (A) (B) (C) (D) 7/16", U-Bolt; 7/16", (400), U-Bolt; (A: When Power Beyond Is Used For Vacuum System (30, 40, 50, 55, 70 Series)) 7/16", U-Bolt; 7/16", 12b Section, U-Bolt; (A: Standard For Usa, Option For Other Countries) 7/16", U-Bolt; 7/16", (Use With 466d), U-Bolt; 7/16", Category 3, U-Bolt; 7/16", (Sub For Et11429), U-Bolt; (A: Used In High Clearance Tractors) 7/16", U-Bolt; (B: For 7200) 7/16", U-Bolt; 7/16" (No Longer Required), U-Bolt; 7/16", (600, 610), U-Bolt; (C: Incld In Cb11468282 And Cb11483634 Flange Fitting) 7/16", U-Bolt; (B: For 7850) 7/16", U-Bolt; 7/16" (Lh Coupler), U-Bolt; 7/16" (4 Used Single) (8 Used Dual) (12 Used Triple), U-Bolt; 7/16", For 10' And 12' Harrows, U-Bolt; 7/16" (12 Used Triple) (7 Used Dual), U-Bolt; 7/16", (No Longer Required With 19h3104 Or 19h2731), Lock Washer; 11.113 mm (7/16"), Lock Washer; (Sub For J219167), U-Bolt; 7/16", For 7 Section, U-Bolt; 7/16", 11' Aw And 11'2" Awr, U-Bolt; 7/16" For Four Wheel Drive Tractors, U-Bolt; 7/16", For 12a Section, U-Bolt; 7/16" (Use With R140849), U-Bolt; (A: Used In 5425 And 5725 Orchard Tractors Too) 7/16", U-Bolt; 7/16", (Tf-01), U-Bolt; 7/16" (Sub For J219167), U-Bolt; 7/16", (No Longer Required W/19h3104), U-Bolt; (Use With 19h2731), U-Bolt; (A: Used In 5415 And 5715 Orchard Tractors) 7/16"	2
12***94	Washer; (V) 5/8", Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Except Sn:) 5/8", Washer; 5/8", (Or, Rc, Ru, Ut), Washer; 5/8", (9 Used For 7', 10 Used For 8', 11 Used For 9'), Washer; (A) 5/8", (Sub For Mg84057), Washer; (C: Used In 5425 Orchard Tractor Too) (D: Used In High Clearance Tractors Too) (E: Used In 5725 Orchard Tractor Too) 5/8" (Sub For 12m7069), Washer; 5/8", A=26,5mm, Washer; 5/8", (Use With N136904), Lock Washer; 15.875 mm (5/8"), Lock Washer; 5/8", Washer; X 5/8", Washer; 5/8", (Df, Tf), Washer; 5/8", With B31967 In Lowest Position, Washer; (A) (B) (C) 5/8", Washer; (B) 5/8", Washer; 5/8" (A) (B), Washer; 5/8", Washer; (C) (D) 5/8", Washer; (A: Up To Serial Number -01*87 And Between Serial Numbers 0197-0167) 5/8", Washer; 5/8" (1" Head Thickness), Lock Washer; 5/8", (Sub For A590916), Washer; 5/8" (For Re73947), Washer; 5/8" (213-4 Used; 215 And 216-5 Used; 218-6 Used; 220, 222, 224-5 Used), Washer; 5/8", (Without Rops), Washer; 5/8", (Rs), Washer; 5/8", (Use With 5513 And 5517), Washer; 5/8" (Disk), Washer; 5/8", (Includes R27084, R27085, E34958 And 24h1283), Washer; 5/8", (Rc), Washer; 5/8" X 3", Washer; 5/8", 431, Washer; 15.875 mm, Washer; 5/8", (Rigid Mounting), Washer; 5/8", (24" Wheel), Washer; 5/8", 2 Used Per Bolt, Washer; (Sub For E13874), Washer; 5/8", (With Rops), Washer; 5/8, Washer; (A: Two Weights) (B: Four Weight) (C: Six Weights) 5/8", Washer; (C) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located After Opener One From Center) 5/8", Washer; 5/8" (844,6146-; 1243,6277-), Washer; 5/8" (Use With H100535), Washer; (A: Two Weights) 5/8", Washer; 5/8", (1000rpm), Washer; 5/8" Lower, Washer; (D) 5/8", Washer; 5/8", (Used With Df And Tf), Washer; 5/8", (10 Used For 8' (2.44 M), 11 Used For 9' (2.74 M), 12 Used For 10' (3.05 M), Washer; (A: Rear (230/95r48 Tire)) (B: Front (230/95r32 Tire)) (D: Also Includes Sn:) 5/8", Washer; 5/8" 5/8", Washer; (Ou)5/8", Washer; 5/8", For 15'3" Harrow, Washer; 5/8", For Bf Or Bft, Washer; 5/8", (3102 And 6204), Washer; (Sub For 12m7069), Washer; 5/8", (Sub For E13874), Washer; (Regular), Washer; (A), Washer; 5/8", (Sub For Mg84057), Washer; (A) (B) 5/8", Washer; 5/8" (Use With Bm18221, Bm18222, Bm18223, Bm18895 Or Bm18224), Lock Washer; (Sub For A590916), Washer; (A: For 9650 ( -6900) & 9750 ( -6900)) 5/8", Washer; 5/8" (Sub For A590916), Washer; 5/8", (4 Per Side), Washer; 5/8" (Sub For R139662, This Application) (Use With R139661 Or 03h2078), Washer; 5/8", (Planetary Final Drive), Washer; 5/8" (19.5l-24 Tire), Washer; 5/8" (A) (B) (E), Lock Washer; 15.875 mm (5/8") (Sub For A590916), Washer; (A: ( -Xxxxxx) Serial No. 8450-0085; 8650-00**13) 5/8", Washer, Washer; (A) 5/8", Washer; (B) (C) 5/8", Washer; (A) (D) 5/8", Washer; 15.875 mm (5/8"), Washer; (A: Two Weights) (B: Four Weights) (C: Six Weights) 5/8", Washer; (A: Two Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" For Two Wheel Drive Tractors, Washer; 5/8", (19.5l-24 Tire), Washer; 5/8", For 465, Washer; 5/8", (4020 Tractors) (4884), Washer; (A: For 2 Weights) 5/8", Washer; (B: 152.4 mm (6 In.) Spacing: Located Between Openers 9 And 10;14 And 15.) 5/8", Washer; 5/8", 631, Washer; 5/8", For 445, Washer; 5/8", (5) On 54-In., (7) On 60-In., (6) On 66-In., Washer; (Sub For A590916), Washer; (A: For 2 Weights) (E: Used In 5715 Orchard Tractor Too) 5/8", Washer; 5/8" (Use With Bm18220, Bm18221, Bm18222, Bm18223, Bm18224 Or Bm18895), Lock Washer, Washer; 16 mm, Washer; (A: Rear) (B: Front) 5/8"	1
12***03	Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70*00) 9550sh (-7000)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 7057-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-0087; 4250-0113; 4450-0214) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-0146; 4850-0032) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-0095; 4450-01*85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)	2

See all parts with full part numbers in Heavy Parts AI →

R.H. Reel Lift Cylinder [B12]

John Deere : 580 - Windrower : R.H. Reel Lift Cylinder [B12]

AH***67	Kit; (Sub For Ae22433), Kit; (Sub For H35248), Kit; (For Cylinder Aw25010), Kit; Seal Repair, Kit; Seal Repair, (Sub For Aw20751), Kit; For Cylinder Aw25010, Kit, Kit; (Seal Repair) Includes Parts Marked (A), Kit; Seal, Kit; (Use With Aw24045)	1
AW***48	Cylinder; 25 Ft. (7.6m) (Sub Aw22737, Aw22738, Aw22739, W34011 And 14h1039), Cylinder; 18 Ft. (5.5m) (Sub Aw22737, Aw22738, Aw22739, W34011 And 14h1039), Cylinder; 21 Ft. (6.4m) (Sub Aw22737, Aw22738, Aw22739, W34011 And 14h1039)	1
AW***37	Hydraulic Cylinder; 18 Ft. (5.5m), Hydraulic Cylinder; 25 Ft. (7.6m), Hydraulic Cylinder; 21 Ft. (6.4m)	1

See all parts with full part numbers in Heavy Parts AI →

Reel Brace [B03]

John Deere : 580 - Windrower : Reel Brace [B03]

14***47	Nut, Nut; 7/16", (3.7 M (12-Ft.), 15 Used) (4.3 M (14-Ft.), 16 Used), Nut; 7/16", For 15'3" Harrow, Nut; 7/16", (Code 6204), Nut; 7/16", 494 And 495 Only, Nut; 7/16", Hs500 Btms., Nut; 7/16", For 6-Row, Nut; 7/16" (Sub For A5236r), Nut; 7/16", 11' Aw; 11'2" Awr, Nut; 7/16", Hs500 Bottoms, Nut; 7/16", (810), Nut; 7/16" (8640), Nut; 7/16", For 35-Tooth Sections, Nut; 7/16", (Sub For Ffsb107935), Nut; 7/16" (Furnish Aa15890 Only In This Appl) (Furnish Aa15890 Only In This Application), Nut; 7/16", For 7 Section, Nut; 7/16", For 5 Section, Nut; 7/16", (Sub For A5236r), Nut; 7/16" Washer Must Be Under Nut Flange, Nut; 7/16", (600, 610), Nut; 7/16", This Application, Nut; 7/16", B+, Nut; 7/16", (400), Nut; 7/16", Hex, Nut; 7/16", 16-Bar, Nut; 7/16", (18 Used, 6'; 22 Used, 8'), Nut; 7/16", (Code 6204 And 6205), Nut; 7/16", Nut; 7/16", (Sub For 14m7296), Nut; (E) 7/16", Nut; (I) 7/16", Nut; 7/16" (Sub For 42*98), Nut; (B) 7/16", Nut; 7/16", 12ft (Use 24), 14ft (Use 28), 16ft (Use 32), Nut; (C) 7/16", Nut; (A) 7/16", Nut; 7/16", For 12b Section, Nut; 7/16", Hs400 Bottoms, Nut; 7/16", Hs400 Btms., Nut; 7/16", 8', 9' Aw; 9', 11' Aws, Nut; 7/16" (8630, 5460, 5820) (E), Nut; 7/16" (Furnish Aa15890 Only In This Appl), Nut; 7/16", (Af), Nut; (Use With T128826), Nut; 7/16", (Tf-01), Nut; 7/16" For Four Wheel Drive Tractors, Nut; 7/16", 12', 13', 15' Aw; 12'6", 13'10" Awr; 12', 13', 14' Aws, Nut; 7/16", (Use With Aa23791), Nut; 7/16" (Sub For T135682), Nut; 7/16", For 10' And 12' Harrows, Nut; (D) 7/16", Nut; 7/16", For 6 Section, Nut; (A) (B) (C) 7/16", Nut; 7/16", (24 Used, 6'; 32 Used, 8'), Nut; 7/16", Plow Bolt, Nut; 7/16" B+, Nut; (B: 24 And 224 Balers) 7/16", Nut; 7/16" Sub For 42*98, Nut; 7/16", (24 And 224 Balers), Nut; 7/16", For 40-Tooth Sections	10
AW***45	Brace; (10 Used On 18-Ft, 5 On 21-Ft)	0
AW***46	Brace; (5 Used On 21-Ft, 10 On 25-Ft)	0
K4***06	Nut; (Sub For M64832), Nut; (Sub For C13443), Nut; (3.7 M (12-Ft.), 47 Used) (4.3 M (14-Ft.), 55 Used), Nut; 11.125 mm (7/16"), Nut; 12ft (Use 26), 14ft (Use 30), 16ft (Use 34), Nut; (C) (D) 11.125 mm (7/16"), Nut; Lock, Nut; 7/16" Jam, Nut; 7/16", (Sub For W22085), Nut; (C), Nut; 7/16", Lock, Nut; 11.125 mm Lock, Nut; 7/16", Nut; 7/16", (3.7 M (12-Ft.) Platform, 48 Used) (4.3 M (14-Ft.) Platform, 56 Used) (Sub For C13443), Nut; (47 Used, 3.7 M (12-Ft.) (55 Used, 4.3 M (14-Ft.) (63 Used, 4.9 M (16-Ft.), Nut; 11.125 mm (7/16") (Sub For N10195), Nut; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) (D: Main Frame (5 Section) Single Point), Nut; (A), Nut; (Sub For A11459), Nut; 1217 (7 Used), 1219 (9 Used), Nut; (3.7 M (12-Ft.), 47 Used) (4.3 M (14-Ft.), 55 Used) (4.8 M (16-Ft.), 63 Used), Lock Nut, Nut; (A) (B) 11.125 mm (7/16"), Nut; (47 Used, 3.7 M (12-Ft.) (55 Used, 4.3 M (14-Ft.), Nut; (48 Used 12 Ft., 58 Used 15 Ft., 70 Used 18 Ft., 82 Used 21 Ft., 98 Used 25 Ft.), Nut; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer), Nut; 11.125 mm (7/16") (Sub For C13443), Nut; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) (D: Mainframe, (5 Section) Singlepoint), Nut, Nut; 7/16", (Sub For A11459), Nut; 11.125 mm, Nut; (A: Standard Wear Boot) (B: Extended Wear Boot), Nut; 7/16", (Sub For C13443), Nut; High Arch, Nut; 7/16", 12ft (Use 26), 14ft (Use 30), 16ft (Use 34), Nut; 11.125 mm (A)	10

See all parts with full part numbers in Heavy Parts AI →

Reel Drive [A22]

John Deere : 580 - Windrower : Reel Drive [A22]

03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	3
03***74	Bolt; 7/16" X 1-1/2", For Rr2 Or Rr4 Cultivator, Bolt; (E) 7/16" X 1-1/2", Bolt; (M) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", Bolt; (N) 7/16" X 1-1/2", Through Guard And Clip, Bolt; 7/16" X 1-1/2", (Through Guard And Clip), Bolt, Bolt; 7/16" X 1-1/2" For Four Wheel Drive Tractors, Bolt; (A) 7/16" X 1-1/2", Bolt; 7/16"X1-1/2", Bolt; 7/16" X 1-1/2" (Use With E64519)	2
11***15	Pin; 0.126" X 0.984", Pin; 3.200 X 25 mm, R.H., Pin; 3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For 19h1726, Kk5091b And 34h262), Pin; (A: On Serial 622 (07*67-0771), 625 (0749-0752), 630 (0701-0715)) 3.200 X 25 mm, Pin; 3.200 X 25mm, Pin; 0.126" X 0.984", (Sub For 11h236), Pin; (A: On Series 616 (41386- ), 618 (41386 - 0862), 620 (41386 - 0896 )) (B: On Series 622 (41386-0766), 625 (41386-0748), 630 (41386-0700)) (C: On Series 622 (0772-0861), 625 (0753-0897), 630 (0716-0854)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Use With W38233), Pin; 3.200 X 25 mm, (Sub For T111608) (Sub For 11m7059), Pin; 3.200 X 25 mm, (Sub For 11h236), Pin; 3.200 X 25 mm, (Sub For 11m7092), Pin; 3x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Sub For Er025565 Appl), Pin; 3.200 X 25 mm, Clamp, Pin; 3.200 X 25 mm 3, 2 X 25 mm, Cotter Pin; 3.200 X 25 mm (0.126" X 0.984") (Sub For Ffsb110062), Pin; 3,2x25mm, Pin; 3.200 X 25 mm, Pin; 3x25mm, Pin; 3.200 X 25 mm 3, 2x25mm, Pin; 3.200 X 25 mm, (1000 Rpm), Pin; 3 X 25 mm, Pin; (A: Offset Rotary Cutter Only) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Sub For Mg80755 Or 11h236), Pin; 3.200 X 25 mm, North America, Pin; 3.200 X 25 mm, (Sub For J16931, This Application), Pin; 3,2x25 mm, Pin; (A: 2064 And 2066 Air Conditioning With Heat Diffuser) 3.200 X 25 mm, Pin, Pin; 3.200 X 25 mm (Use With W33908), Pin; (A: S.N. ( -Xxxxxx)) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For Er025565, Appl), Cotter Pin; 3.200 X 25 mm, Pin; 3.200 X 25 mm, (Use With W38233), Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; (A: Starting From Series Number 618 (0863- ), 620 (0897- )) (B: Starting From Series Number 622 (0862- ), 625 (0898- ), 630 (08*55- )) 3.200 X 25 mm, Pin; 1/8"X3/4",3x25mm (Sub For 11h211), Pin; 3.200 X 25 mm, (Sub For Mg87395 Or 11h236), Pin; 3,2x25mm (Sub For 11h234), Pin; 3.200 X 25 mm (B), Pin; (B) 3.200 X 25 mm, Pin; X 3,2 X 25 mm (Sub For 11h236), Pin; 3.200 X 25 mm, Europe And Israel, Pin; (A: Components Of Item Dq73362) 3.200 X 25 mm, Pin; 3.200 X 25 mm (Sub For (4) 11m7015), Pin; 3.200 X 25 mm, (Standard Axle), Pin; 3,2 X 25 mm, Pin; 3x28mm, Pin; 3.200 X 25 mm, (Rc And St), Pin; 3.200 X 25 mm, (Sub For A81412), Pin; (A), Pin; 3.200 X 25 mm (Pin To Depth Stop Rod), Pin; 3.200 X 25 mm (A), Cotter Pin; 3.200 X 25 mm, (Sub For 11m7059), Pin; 3.200 X 25 mm (0.126" X 0.984"), Pin; (A) 3.200 X 25 mm, Pin; 3.200 X 25 mm, (4 Per Side), Pin; 3,2x25mm (Sub For 11h236), Pin; 3.200 X 25 mm (Right Lower Brake Rod To Bellcrank), Pin; (312) Inc. 20, Pin; 3.200 X 25 mm (Sub For R113973), Cotter Pin; 3.200 X 25 mm, (Sub For Ffsb110062), Pin; (A) 3,2 X 25 mm, Pin; 3,2 X 25mm, Pin; 3.200 X 25 mm (Sub For Kv19499), Pin; 3.2x2.5mm, Pin; (312) 3,2x25mm, Pin; 3.200 X 25 mm, (Use With R57619)	1
11***86	Cotter Pin; (A: Starting From Series Number 625 (06*44- ), 630 (0634- )) 2.500 X 50 mm, Cotter Pin; 2.500 X 50 mm, (Sub For 11h229), Cotter Pin; 2.500 X 50 mm, Cotter Pin; 0.098" X 1.969", Cotter Pin; (A: Up To Series 625 ( -0643), 630 ( -06*33)) 2.500 X 50 mm	1

See all parts with full part numbers in Heavy Parts AI →

Reel Support Arms And End Frames [A24]

John Deere : 580 - Windrower : Reel Support Arms And End Frames [A24]

03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	2
03***22	Bolt; 1/2" X 1-1/4" (Sb60b), Bolt; 1/2" X 1-1/4", (4 Used), (6 Used, Wide Gauge Shoes), Bolt; 12.700 X 31.750 mm (1/2" X 1-1/4"), Bolt; 1/2" X 1-1/4", (63 X 7, 45 X 10, 57 X 7, 41 X 10), Bolt; (A) 1/2" X 1-1/4", Bolt; (B) (E) (G) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (Without Spacer), Bolt; 1/2" X 1-1/4" (Sb72b), Bolt; (B) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", (21 X 7, 23 X 7), Bolt; 1/2" X 1-1/4" (Sb78), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-1/4", Used With Steel Shields., Bolt; 1/2"X1-1/4", Bolt; 1/2" X 1-1/4", (280), Bolt; 1/2" X 1-1/4" Narrow Front, Bolt; 1/2" X 1-1/4" (Sb84), Bolt; 1/2" X 1-1/4" (Sb78b), Bolt; 1/2" X 1-1/4" (Sb60), Bolt; 1/2" X 1-1/4" (Sb84b), Bolt; 1/2" X 1-1/4", (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-1/4" (Sb72), Bolt; 1/2" X 1-1/4" 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Knife Cover Only, Bolt, Bolt; 1/2" X 1-1/4", Bolt; (A: For Drill With Odd Number Of Rows) 1/2" X 1-1/4", Bolt; (B) (D) (E) (F) 1/2" X 1-1/4", Bolt; 1/2" X 1-1/4", Narrow Front, Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4" 305mm (12''), Bolt; 1/2" X 1-1/4", Covering Knife, Bolt; 1/2" X 1-1/4" (Use With 12h301 And 14h1040), Bolt; (B: For 390 Offset Mower) 1/2" X 1-1/4"	3
03***24	Bolt; 5/16" X 1" (Use With 12h303 And 14h785), Bolt; 5/16" X 1", (Use With 12h303 And 14h785), Bolt; 5/16" X 1", (9350 Series Hoe), Bolt; 5/16" X 1" (Regular), Bolt; 5/16" X 1", (Front), Bolt; 5/16"X1", Bolt; 5/16" X 1" (A) (B), Bolt; (A) 5/16" X 1", Bolt; X 5/16" X 1", Bolt; 5/16" X 1" (Use With H76696), Bolt; 5/16" X 1" (Top), Bolt; 5/16" X 1", (675) (Use With Mg622490), Bolt; 5/16" X 1" (Use With 14h785), Bolt; 5/16" X 1", Bolt; (C) 5/16" X 1", Bolt; 5/16" X 1", (675), Bolt; 5/16" X 1" (Carriage Bolt Style Shear Bolt), Bolt; 5/16" X 1" (Use With N10213), Bolt; (B) 5/16" X 1", Bolt; 5/16" X 1", (For 12 Rotary Hoe), Bolt; 5/16" X 1", (12 Rotary Hoe), Bolt; 5/16" X 1", Rd. Hd., Bolt; (Front)	6
03***01	Bolt; 1/4" X 3/4", 100 Per Package, (Sub For Mg88832), Bolt; 1/4" X 3/4", Bolt; 1/4" X 3/4" 100 Per Package, (Sub For Mg88832)	12

See all parts with full part numbers in Heavy Parts AI →

Reel [B01]

John Deere : 580 - Windrower : Reel [B01]

03***12	Bolt; (B) 3/8" X 2-1/2", Bolt, Bolt; 3/8" X 2-1/2", Bolt; (A) 3/8" X 2-1/2", Bolt; 3/8" X 2-1/2" Lh, Bolt; 3/8" X 2-1/2", Rd.Hd., Bolt; 3/8" X 2-1/2" (Use With 14h812)	2
03***19	Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)	3
03***09	Bolt; 9.525 X 101.600 mm (3/8" X 4"), Bolt; (A) (B) (C) 3/8" X 4", Bolt; (D) 3/8" X 4", Bolt; 3/8" X 4"	4
11***85	Cotter Pin; 6.300 X 63 mm (Use With Ae50304 Or Ae50305), Cotter Pin; 6.300 X 63 mm (Sub For 11h249), Cotter Pin; (C: Shear Pin) 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm, 1/4 X 2, Cotter Pin; 6.300 X 63 mm, (Sub For 11h249), Cotter Pin; 6x63mm, Cotter Pin; 6,3 X 63 mm, Cotter Pin; (A) 6,3 X 63 mm, Cotter Pin; 6.300 X 63 mm, (4 Used, 1217; 5 Used, 1219), Cotter Pin; 6 X 63 mm, Cotter Pin; (A) 6.300 X 63 mm, Cotter Pin; 6.3 X 63mm, Cotter Pin; 6.300 X 63 mm (0.248" X 2.480"), Cotter Pin; 6.300 X 63 mm, (Use With Ae50304 Or Ae50305), Cotter Pin; 6,3x63mm, Cotter Pin; 6.300 X 63 mm, (Sub For 11m7058), Cotter Pin; 6.300 X 63 mm, Cotter Pin; 6.300 X 63 mm (U/W Ae50304 Or Ae52489), Cotter Pin; 6.300 X 63 mm (Use With Ae50305), Cotter Pin; (K) 6.300 X 63 mm, Cotter Pin; Ar 6,3 X 63 mm, Cotter Pin; 6.3 X 63 mm, Cotter Pin; 6.300 X 63 mm Shear Pin, Cotter Pin, Cotter Pin; 6.300 X 63 mm, (Use With Ae50305), Cotter Pin; 0.248" X 2.480"	4

See all parts with full part numbers in Heavy Parts AI →

Safety Tow Chain (1985- ) [B15]

John Deere : 580 - Windrower : Safety Tow Chain (1985- ) [B15]

34***45	Pin; 1/8" X 5/8" (B), Pin; (A), Pin; 1/8" X 5/8", Pin; 1/8" X 5/8" (Use With Ar90581), Pin; 1/8" X 5/8" (Use With 10, 000 Lb Chain), Pin; (C) 1/8" X 5/8", Pin; 1/8" X 5/8" (Ru And Or), Pin; 1/8" X 5/8", (Rc And St), Pin; 1/8" X 5/8", (Use With 10,000 Lb Chain), Pin; (Use With 10,000 Lb Chain), Pin; 1/8" X 5/8", (Ru And Or), Pin; 1/8"X5/8", Pin; (A) 1/8" X 5/8", Pin, Pin; (B) 1/8" X 5/8", Spring Pin; 1/8" X 5/8", Pin; 1/8" X 5/8", Used With 10,000 Lbs. Chain, Pin; 0,125" X 0,625", Pin; (A: 10, 000 Lb.) 1/8" X 5/8"	1
AE***67	Safety Chain Adapter; (B) (Sub Ae71231), Safety Chain Adapter; (Sub For R69403, R74599, R74600, R74601 And R74602), Safety Chain Adapter; (Sub Ae71231), Safety Chain Adapter, Safety Chain Adapter; (A) Nsep (Ord Ae71231), Safety Chain Adapter; Nsep (Ord Ae71231)	1
AR***81	Link Chain; 61 Links 6.4mm (1/4") Dia Chain (10,000 Lb), Link Chain; 10,000 Lbs (Sub Ae58576, This Application), Link Chain; 6.4 mm (1/4"), (4536 Kg) (10, 000 Lb), Link Chain; 61 Links, 6.4mm (1/4") Dia (10, 000 Lb) Chain, Link Chain; (10,000 Lb.), Link Chain; (Includes 1,2,3,4,5,6 And 7), Link Chain; 6.4 mm (1/4") 4536 Kg (10, 000 Lb), Link Chain; 61 Links 6.4 mm (1/4") Dia Chain (10,000 Lb) (Sub For Re26740), Link Chain; (Sub For Ac15795), Link Chain; (10, 000 Lb.), Link Chain; 6.4 mm (1/4"), 4536 Kg (10, 000 Lb), Link Chain; 10, 000 Lbs, Link Chain; (10, 000 Lb.), (Sub Ae58576, This Application), Link Chain; (10, 000 Lb), 61 Links 6.4 mm (1/4") Dia Chain, Link Chain; (Sub For Ar100280), Link Chain; 10, 000 Lb, Link Chain; 10 000 Lbf, Link Chain; 10,000 Lbs, Link Chain; 61 Links, 6.4 mm (1/4") Dia Chain (10,000 Lb), Link Chain; 6.4 mm (1/4") (4536 Kg) (10, 000 Lb), Link Chain; Includes Keys 17-23; 10,000 Lbs., Link Chain; (10, 000 Lb) (Sub Ae58576, This Application), Link Chain; 61 Links 6.4mm (1/4") Dia Chain (10, 000 Lb), Link Chain, Link Chain; 6.4 mm (1/4") 4536 Kg (10,000 Lb), Link Chain; 10,000 Lb. Chain, Link Chain; 6.4 mm (1/4") Dia Chain (10, 000 Lb) 61 Links, Link Chain; (A: 10, 000 Lb.) (Sub Ae58576, This Application), Link Chain; 61 Links 6.4 mm (1/4") Dia Chain (10,000 Lb), Link Chain; 10,000 Lb, Link Chain; 10,000 Lbs. Chain, Link Chain; 61 Links 6.4 mm (1/4") Dia Chain (10, 000 Lb), Link Chain; For Rear Plow, 10,000 Lbs. Chain, Link Chain; 10,000 Lbs., Link Chain; 10, 000 Lbs.	1

See all parts with full part numbers in Heavy Parts AI →

Slow Moving Vehicle Emblem [B14]

John Deere : 580 - Windrower : Slow Moving Vehicle Emblem [B14]

12***46	Lock Washer; 0.190", (Sub For 19*06 Or 1944), Lock Washer; 0.190", Lock Washer; 0.190", (Sub For R56012), Lock Washer; 0.190" Na, Lock Washer; (F) 0.190", (Use With Ar66424), Lock Washer; (Sub For Ffsb107825), Lock Washer; 0.190", (Sub For T18836), Lock Washer; (K) 0.190", Lock Washer; No 10, Lock Washer; 0.190", (Use With T23462 And T23463), Lock Washer; 0.190", (9 Used On Each Draper), Lock Washer; 0.190", (Sub For 1906 And T18836), Lock Washer; 0.190" (Use With T23460 And T23461), Lock Washer; 0.190", (Sub For 1906), Lock Washer; (C) 0.190", Lock Washer; No. 10, Lock Washer; 0.190", (Sub For 1906) No. 10, Lock Washer; (A) (B) 0.190", Lock Washer; 0.190", Marked 1156, Lock Washer; 0.190", 18 mm (.007"), Lock Washer; 0.190" (Sub For T18836), Lock Washer; 0.190" (Use With T23462 And T23463), Lock Washer; 0.190" 0.190", Lock Washer; N.10, Lock Washer; Ar, No.10, Lock Washer; 0.190", Upper, Lock Washer; 0.190", (3004 And 3005), Lock Washer; 0.190", No. 10, Lock Washer; 0.190", Connector To Field Coil Lead, Lock Washer; 4.826 mm (0.190"), Lock Washer; No.10, Lock Washer, Lock Washer; 0.190", (Sub For 18*58), Lock Washer; 4.826 mm, Lock Washer; 0.190", (Sub For H23195), Lock Washer; 0.190" (Use With T23460 And T23461 And Ar72960), Lock Washer; 0.190", (Sub R122848), Lock Washer; 0.190" (A), Lock Washer; No10, Lock Washer; 0.190", (Sub For Ffsb107825), Lock Washer; 0.190", (Use With T23460 And T23461), Lock Washer; (F) 0.190", (Use With At25619), Lock Washer; Connector To Field Coil Lead, No. 10, Lock Washer; 0.190", (Sub For Mg80684), Lock Washer; 0.190" (Use With T23460, T23461 And Ar72960), Lock Washer; 0.190", (Use With R70407, R72817, R72818), Lock Washer; 0.190" (Switch Terminal) (Use With Ar66494), Lock Washer, Lock Washer; 0.190", (Use With T23460, T23461 And T23463), Lock Washer; 0.190", (Sub For A767r), Lock Washer; (B) 0.190", Lock Washer; 0.190", Lock Washer; 0.190", (Sub For Ty4169), Lock Washer; 0.190", (Gasoline), Lock Washer; 0.190", (Sub For T11740), Lock Washer; 0.190", (Nla), Lock Washer; 0.190" (Use With Am53945), Lock Washer; 0.190", (Use With Ar11109 Or Ar11116), Lock Washer; 10, Lock Washer; (A) No.10, Lock Washer; (A) 0.190", (Sub For T11740), Lock Washer; (B) No.10, Lock Washer; 0.190", (Sub For M80684), Lock Washer; 0.190" (Use With T23460, T23461 And T23463), Lock Washer; 0.190" (Use With R70407, R72817, R72818), Lock Washer; (A) No. 10, Lock Washer; 0.190" (Use With Ar72960, T23460 And T23461), Lock Washer; (A) (B) (C) 0.190", Lock Washer; (A) 0.190", Lock Washer; Ar, No. 10, Lock Washer; 0.190", No.10, Lock Washer; 4.826 mm (0.190"), Lock Washer; 0.190" (Use With Mg279927), Lock Washer; (A) No 10, Lock Washer; 0.190" (404dh-03)	2
14***78	Nut; 0.190", (10-32), Nut, Nut; 0.190", Replaces Washer, Nut; No10, Nut; Hh 10-24, Nut; 0.190" 0.190" No. 10, Nut; 0.190" No.10, Nut; 0.190" No. 10, Nut; No. 10, Nut; (B: ( -Xxxxxx) 4055-01*00; 4255-0100; 4455-0200) 0.190", Nut; 0.190", (Tractors), Nut; (B) 0.190", No. 10, Nut; 4.826 mm (0.190") No.10, Nut; 4.826 mm, Nut; No.10, Nut; 0190", Nut; 0.190", Canada Only, Nut; (A: ( -Xxxxxx) 8560-0030; 8760-0021; 8960-00*36) 0.190", Nut; 0.190", (Sub For Mg87304), Nut; 0.190", For Cleaner Shafts, Nut; 4.826 mm (0.190"), Nut; 0.190" Hs 10.9, Nut; (B) 0.190", Nut; 0.190", (9 Used On Each Draper), Nut; 0.190", Nut; No.10 (Sub For 14h631), Nut; 0.190", No. 10, Nut; 0.190", Nut; (A) 0.190", Nut; 0.190", (1 Used, A/C Factory Installed) (2 Used, A/C Adapted To Pressurized Cab), Nut; 0.190", (Diesel, Less Cab), Nut; 0.190", (Denmark, Spain, Sweden And United Kingdom Only), Nut; (A) No.10, Nut; (Sub For Ffsb107826), Nut; 1.90", Nut; 0.190" (Hs=10.9), Nut; N 10, Nut; (D) 0.190", Nut, Nut; 0.190" Hs=10.9, Nut; 4.826 mm (0.190"), Nut; No.10, (Sub For 14h631), Nut; No 10	2
19***13	Cap Screw; 5/16" X 5/8", (Use With 12h303 And 14h785), Cap Screw; 5/16" X 5/8" (220-5 Used; 222 And 224-10 Used), Cap Screw; 5/16" X5/8", Cap Screw; (C) (E) 5/16" X 5/8", Front, Cap Screw; 5/16" X 5/8" (Dn-03, Gn-01, Ln-01, Nb-D, Nb-G, Nb-L), Cap Screw; 1/2" X 2", Cap Screw; 5/16"X8", Cap Screw; (A) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Sub N10212, This Application), Cap Screw; (A: 4-Post Roll-Gard) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Use With N10213), Cap Screw; 5/16" X 5/8" (Use With An281247), Cap Screw; 5/16" X 5/8", (Ea-G, Ge-01), Cap Screw; 5/16"X5/8", Cap Screw; 5/16" X 5/8", (4 Used Sound-Gard Body), Cap Screw; 5/16" X 5/8" (A), Cap Screw; 5/16" X 5/8" (Nlr), Cap Screw; X 5/16" X 5/8", Cap Screw; 5/16"X5/8" (For Z10945, Z11386), Cap Screw; 5/16" X 5/8", Nla, Cap Screw; 5/16" X 5/8", (Use With R40930, R40940 Or R49550), Cap Screw; (B: W/O Cab) 5/16" X 5/8" Oos, Cap Screw; 5/16" X 5/8", (Sub For Mg88859), Cap Screw; 5/16" X 5/8", Cowl To Control Support, Cap Screw; 5/16" X 5/8", No Longer Required, Cap Screw; 5/16" X 5/8" (Sub For 19h1948), Cap Screw; 5/16" X 5/8" (Use With 12h303 And 14h785), Cap Screw; (C) (E) 5/16" X 5/8", Cap Screw; 5/16" X 5/8", (Use (3) With R26078), Cap Screw; 7.925 X 15.875 mm (5/16" X 5/8"), Cap Screw; 5/16" X 5/8", (Lower) 6 Roller Pump, Cap Screw; 5/16" X 5/8", (Sub N10212, This Application), Cap Screw; 5/16" X 5/8", (Dn-01, Gn-01), Cap Screw; 7.925 X 15.875 mm, Cap Screw; (E: Use With Smooth Crown Wheel) 5/16" X 5/8", Cap Screw; (B) 5/16" X 5/8", Cap Screw; 5/16"X5/8" (For Z11386), Cap Screw; (C) 5/16" X 5/8", Cap Screw; 5/16" X 5/8", (2903), Cap Screw; (F) 5/16" X 5/8", Lower, Cap Screw; 5/16 X 5/8", Cap Screw; 5/16" X 5/8" (Use With 14h785), Cap Screw; (V) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Sub For 19h2284), Cap Screw; 5/16"X9/16", Cap Screw; 5/16" X 5/8", (9108,9121), Cap Screw; 5/16" X 5/8", (3 Used Rs, Ut), Cap Screw; 5/16" X 5/8", Cap Screw; 5/16"X.518", Cap Screw; 5/16" X 5/8", For C1232n Only, Cap Screw; 5/16"X.578", Cap Screw; (D) 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (Rg), Cap Screw; 5/16"X3/8", Cap Screw; (A) R.Bosch,5/16"X5/8", Cap Screw; (B) 5/16"X5/8", Cap Screw, Cap Screw; 5/16" X 5/8" (No Longer Required), Cap Screw; 5/16" X 5/8", 6 Roller Pump Only, Cap Screw; 5/16" X 5/8" 5/16" X 5/8", Cap Screw; (A) 5/16"X5/8", Cap Screw; 5/16" X 5/8", (Use With R71529 Or R71531), Cap Screw; 5/16" X 5/8", Lower, 6 Roller Pump Only, Cap Screw; 5/16" X 5/8", (Nlr), Cap Screw; 5/16" X 5/8", (No Longer Required), Cap Screw; 5/16" X 5/8", (4 Used, Sound-Gard Body), Cap Screw; (B: 4-Post Roll-Gard) 5/16" X 5/8", Cap Screw; (A: Contained In Ar87569) 5/16" X 5/8", Cap Screw; 5/16" X 5/8", Germany, Cap Screw; 5/16" X 5/8" (Sub N10212) This Application, Cap Screw; 5/16" X 5/8", (Ut), Cap Screw; 5/16" X 5/8" (D), Cap Screw; X 5/16" X 5/8", Cap Screw; 5/16" X 5/8" (C)	2
21***48	Screw; 0.190" X 3/4", (Use With Pt9543 Bracket), Screw; 0.190" X 3/4", Red And Amber, Screw; 0.190" X 3/4", Screw; 0.190" X 3/4", Use With Amber And Red Reflectors, Screw; 0.190" X 3/4", Use With Amber And Red Reflector, Screw; 0.190" X 3/4" (A), Screw; Red And Amber, Screw; (A) 0.190" X 3/4", Screw; 0.190" X 3/4", Canada Only, Screw; 4.826 X 19.050 mm, Screw; 4.826 X 19.050 mm (0.190" X 3/4")	2

See all parts with full part numbers in Heavy Parts AI →

Table Lift Cylinder [B11]

John Deere : 580 - Windrower : Table Lift Cylinder [B11]

11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	4
12***01	Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62*50; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645;-6200; 843,-6166, 844,-6200; 1243,-6250), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-0001; 8650-0001) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (0000-0099), 370 (0000-0099), 390 (0000-0099)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -7000) 9550sh ( -7000)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -0082), 370 ( -0093) And 390 ( -0080)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-0029; 8760-0029; 8960-0035) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (0000- ), 370 (0000- ) And 390 (0000- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-0192; 4850-0025) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43**85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)	2
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
19***50	Cap Screw; 1/2" X 4", (Use With Heavy-Duty Drawbar), Cap Screw; 1/2" X 4" (Sub For Mg86505993), Cap Screw; 1/2" X 4" (Hs, Sae 8), Cap Screw; (B) 1/2" X 4" (.500 X 4.00), Cap Screw; 1/2" X 4", Cap Screw; 1/2" X 4" (For Tube Tongue), Cap Screw; (C) 1/2" X 4", Cap Screw; 1/2" X 4" (Hs, Sae 8) (10-Foot (3.05 M)), Cap Screw; 1/2"X4", Cap Screw; 1/2" X 4", (Hs, Sae 8) (For 8100 And 8250), Cap Screw; 1/2" X 4", (Hs, Sae 8) (For Tube Tongue), Cap Screw; 1/2" X 4", Hs, Sae 8, Cap Screw; 12.700 X 101.600 mm, Cap Screw; 1/2" X 4" Hs, Sae 8, Cap Screw; 1/2" X 4" (Hs, Sae 8) (Use With An210951), Cap Screw; (B) 1/2" X 4", Cap Screw; 1/2" X 4" (10-Foot (3.05 M)), Cap Screw; 1/2" X 4" Grade 8, Cap Screw; 1/2" X 4, Cap Screw; 1/2" X 4", (Grade 8), Cap Screw; (A) (C) 1/2" X 4", Cap Screw; 1/2" X 4" Hs, Sae 8, 1/2" X 4", Cap Screw; Hs, Sae 8, 1/2" X 4", Cap Screw; 1/2" X 4", (Ru And Or), Cap Screw; (A) 1/2" X 4", Cap Screw; 1/2" X 4", For 790, 850, And 870, Cap Screw; 1/2" X 4" Hs, Sae8, 1/2" X 4"	2

See all parts with full part numbers in Heavy Parts AI →

Transport Hitch, Wheels And Spindles [A10]

John Deere : 580 - Windrower : Transport Hitch, Wheels And Spindles [A10]

11***87	Cotter Pin; 4 X 40 mm, 5/32 X 1-1/2, Cotter Pin; 4 X 40 mm (0.157" X 1.575"), Cotter Pin; (A), Cotter Pin; 4 X 40 mm (Integral And Center Pull-Type), Cotter Pin; 4 X 40 mm (Sub For 11h240), Cotter Pin; 4 X 40 mm Incld In 16, 17, Cotter Pin; (A) 4x40mm, Cotter Pin; 5/32"X1", Cotter Pin; 4 X 40 mm (Sub For A15147, This Application), Cotter Pin; (A) 4 X 40 mm (Use With M76005 Axle), Cotter Pin; 4 X 40 mm, (Sub H114001), Cotter Pin; 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, (Used With Aw11246 Only), Cotter Pin; 4 X 40 mm, Cotter Pin; 4 X 40 mm L.H., Cotter Pin; 4 X 40 mm, (15 Ft (4.6 M) Only), Cotter Pin; 4x40mm, Cotter Pin; 4 X 40 mm, (Standard Axle), Cotter Pin; 4 X 40 mm 15 Ft (4.6 M) Only, Cotter Pin; 4 X 40mm, Cotter Pin; (B) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For T110419) (Sub For 11m7023), Cotter Pin; (B) 0.157" X 1.575", Cotter Pin; 4x32mm, Cotter Pin; 4x40mm, Rh, Lh (Sub For 11h240), Cotter Pin; 4 X 40 mm (Offset Pull-Type), Cotter Pin; 4 X 32mm, Cotter Pin; 4 X 40 mm, (Sub For Ch12324), Cotter Pin; 4 X 40 mm, (Sub For 11m7023), Cotter Pin; 4 X 40 mm, (Sub For 11m7021), Cotter Pin; (A) 4 X 40 mm, Cotter Pin; 4 X 40 mm, (Sub For 11h240), Cotter Pin; 4 X 40 mm (15 Ft (4.6 M) ), Cotter Pin; (A) 4 X 40 mm, (Use With M76305 Axle), Cotter Pin; 4x25mm, Cotter Pin; 4 X 40 mm (A), (C), Cotter Pin, Cotter Pin; 4 X 40, Cotter Pin; (Sub For T111661) (Sub For 11m7023), Cotter Pin; (Ord Al178087), Cotter Pin; Rh, Lh, 4x40mm (Sub For 11h240), Cotter Pin; 4 X 40 mm, L.H., Cotter Pin; 0.157" X 1.575", Cotter Pin; (A) (B) 4 X 40 mm	1
12***03	Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70*00) 9550sh (-7000)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 7057-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-0087; 4250-0113; 4450-0214) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-0146; 4850-0032) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-0095; 4450-01*85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)	1
14***40	Nut; (B: Power Shift Transmission) 1/2" Lh, Nut; 1/2", For 4 Section, Nut; (A: European Version) (B: ( -Xxxxxx) 4555-00*94; 4755-0068; 4955-0013) 1/2" Lh (Pst), Nut; 12.700 mm (1/2") (1253a), Nut; (E) 1/2", Nut; 1/2" Hs, Sae 8, Nut; 1/2", (Rc And St), Nut; 1/2", Used With Steel Housing, Nut; 1/2" Nla, Nut; (A) (C) 1/2", Nut; 1/2", (40 Used For 714, 714a; 48 Used For 716, 716a), Nut; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models) 1/2", Nut; 1/2", Conventional Units, Nut; 1/2", (4 Used For 660 Single Chain, 10 Used For 680 And 660 Double Chain), Nut; 1/2" (Flexible), Nut; 1/2", (12 Used For 714, 714a; 14 Used For 716, 716a), Nut; 1/2", Nut; 1/2", (2 Used - 443,-6250; 444,-6200; 543, -3800)(4 Used - 546,-6200; 643,-6143; 642,842,-3300; 644,-6116; 645,-6200; 843,-6166; 844,-6200; 1243,-6250), Nut; (D) 1/2", Nut; 1/2", For 6 X 12 2-Ply Tire With Tube, Nut, Nut; (Sub For 14h809) Internal-Tooth, 1/2", Nut; 1/2", (United Kingdom Only), Nut; 1/2", (336 And 346 Balers), Nut; 1/2" (Hs, Sae 8) Lh, Nut; 1/2", R.H., Nut; 3/8" X 5/16", (Sub For Bp13525), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (9) 14h809), Nut; (A: 2.1 M (84 In.)(7 Ft.)) 1/2" (Sub For (7) 14h809), Nut; 1/2", For 6-Row Planters Only, Nut; 1/2" 7 Ft., Nut; (A) 1/2", Nut; M12,7 (For Dc38476), Nut; 1/2" (Use With Ah90897), Nut; 1/2" 1/2 Unc-2b Grade 8 Zn, Nut; 1/2" (Use With Six T-Weights), Nut; 1/2" (Use With 12h301), Nut; 1/2", (L.H. Only), Nut; 1/2" 9 Ft., Nut; 1/2" 8 Ft., Nut; 1/2" (A), Nut; (B: For 3.2 M (10'7") Size) (C: For 3.6 M (12'0") Size) (D: For 4.0 M (13'5") Size) 1/2", Nut; 12.700 mm (1/2"), Nut; (A: Floor To Control Support) 1/2", Nut; (A) (D) 1/2", Nut; 1/2" (Outer), Nut; 1/2", For 760 And 790, Nut; 1/2", (Sub For 14h809) (Dh-01, Dh-03, Gh-01, Ha-D), Nut; (For Dc38476), Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (9) 14h809), Nut; 1/2" (Rigid), Nut; 1/2", For 4 648 mm (15') Harrow, Nut; 1/2", (Twin Swath), Nut; 1/2", (Part Of Ae41712), Nut; 1/2", (Regular), Nut; 12.700 mm, Nut; 1/2", (Use With Ah146250), Nut; 1/2", (4 Used, With 03h1946; 8 Used, With 03h2261), Nut; 1/2" (B), Nut; 1/2" L.H., Nut; 1/2" (L.H. Only), Nut; 1/2", For 5 Section, Nut; (D) (E) 1/2", Nut; (A) (B) (C) (D) 1/2", Nut; (C), Nut; 1/2" (Flex), Nut; 1/2", Quantity Of (2) Into Header With Keyed Hub, Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers.) 1/2", Nut; 1/2", (4 Used For 714, 714a; 6 Used For 716, 716a), Nut; 1/2" 1/2", Nut; 1/2", (Sub For Na5794), Nut; (B) (D) 1/2", Nut; 1/2", (Sidehill), Nut; 1/2" 6 Ft., Nut; 1/2, Nut; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Nut; 1/2" Quantity Of (2) Into Header With Keyed Hub, Nut; 1/2" (Sub For 14h826, This Application), Nut; (B) 1/2", L.H., Nut; (F) 1/2", Nut; 1/2" (Sub For 28h1519 Appl), Nut; (E), Nut; (B) 1/2", Nut; 1/2" (Use With Kv20260), Nut; 1/2" (Use With Kv17192 Or Kv17074), Nut; 1/2", Hs, Sae 8, Nut; (C: 2.7 M (108 In.)(9 Ft.)) 1/2" (Sub For (11) 14h809), Nut; 1/2", (Sub For 14h809), Nut; 1/2", (Transmission Case With Reamed Holes), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (12) 14h809), Nut; 1/2", (For 110 Bushel Models), Nut; 1/2", (4 Used With 3h46) (8 Used With 3h61), Nut; (C) 1/2", Nut; 1/2", (2 Used Single) (4 Used Dual), Nut; 1/2", For 850 And 870, Nut; 1/2", (Starter Stud), Nut; 1/2", (B), Nut; 1/2", (Sub For Bp13525), Nut; (A: For 2.7 M (8'11") Size) (B: For 3.0 M (10'0") Size) (C: For 3.4 M (11'2") Size) (D: For 3.7 M (12'4") Size) 1/2", Nut; 1/2", (2 Used, 347; 1 Used, 467), Nut; 1/2", (Sub For Mg280431), Nut; 1/2", (With Iron-Gard), Nut; (A) (B) (C) 1/2", Nut; 1/2", (Comes With Starter), Nut; 1/2", Use With Fluted Coulter, Nut; 0,5" (For Dc38476), Nut; (B) (C) 1/2", Nut; 1/2", (Less Selective Control), Nut; (A: 336, 346, 327, 337, 347, 328, 338, 348 And 468 Balers) 1/2", Nut; 1/2" (Gasoline), Nut; (A) (C) (D) 1/2", Nut; 1/2", North America, Nut; (A) 1/2", R.H. Front, Outside End And L.H. Front, Outside End, Nut; 1/2", 730 Tractor, Nut; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Nut; (E) 1/2", Front Gang, Nut; 1/2" (R), Nut; 1/2" (Use With 03h1439), Nut; 1/2" (Sub For 14h809), Nut; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Nut; (A: For 2.8 M (9'2") Size) 1/2", Nut; (A: Option) 1/2", Nut; (A) (D) (E) 1/2", Nut; 1/2", (Roll-Gard Or Sound-Gard), Nut; 1/2", (Sub For K40014, This Application), Nut; 1/2" Tow Behind, Nut; 1/2" (Use With P54727 And P54726), Nut; 1/2", For Extra-Heavy-Duty Shares, Nut; (A) (B), Nut; (C) (D) 1/2", Nut; 1/2", 10 Hitch, Nut; 1/2", (Use With (9) T-Weights), Nut; 1/2", (4 Used With 03h1853) (8 Used With 03h2261), Nut; 1/2", Wide Gauge Shoes, Nut; 1/2" (4 Used, With 03h1496 8 Used, With 03h2261), Nut; (D), Nut; 1/2", Rear, Nut; 1/2" (B), (30"), Nut; (Starter Stud), Nut; (B) 1/2", (Sub For Mg280431), Nut; 1/2", For 15'3" Harrow, Nut; 1/2" (A) (B), Nut; Hobbs, Nut; 12.700 mm (1/2") (854a), Nut; 1/2" (Use With (9) T-Weights), Nut; 1/2" Rear, Nut; 1/2" (B), (38"), Nut; 1/2", (2 Used A) (4 Used B), Nut; 1/2" (6 Used, Extra Heavy Duty Final Drive; 2 Used, Regular And Heavy Duty Final Drive), Nut; 1/2" 6, 7, And 8 Series Balers Except 466, 467, 468 And Otherwise Noted, Nut; 1/2" 10 Ft., Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", (700), Nut; 1/2", (Use With Heavy-Duty Drawbar), Nut; 1/2", (2 Used, A) (4 Used, B), Nut; 1/2", (Ty2036), Nut; 1/2", Part Of Ae41701, Nut; 1/2" Lh, Nut; 1/2", Barb 3/4" M.P.T. X 3/4", Nut; (B) (C) (D) 1/2", Nut; 1/2" (4 Used With 03h1946, 8 Used With 03h2261), Nut; (B: ( -Xxxxxx) 4055-0046; 4255-0012; 4455-01**38) 1/2" Lh (Pst), Nut; (E) (A) 1/2", Nut; (A) (B) 1/2", Nut; 1/2", Use With (9) T-Weights, Nut; 1/2" Hs, Sae 8 (Rc, Ru, Rus) (Less Drawbar), Nut; (D: 3 M (120 In.)(10 Ft.)) 1/2" (Sub For (10) 14h809), Nut; 1/2", Nut; 1/2" Lh, (Pst), Nut; 1/2", (36 Used For 714, 714a; 42 Used For 716, 716a), Nut; 1/2" U/W Rowside C-Shank Or S-Tine Standards, Nut; 1/2", (Disk Covers Only), Nut; 1/2", (Use With 1 372 mm (54") Extension), Nut; 1/2" (D), Nut; (A: Safety) 1/2", Nut; 1/2", (Hs, Sae 8), Nut; 1/2", For 10' And 12' Harrows, Nut; (A) (B) 12.700 mm, Nut; 1/2", Rear Gang, Nut; 1/2" (Sub For 14m7275), Nut; 1/2" Lh (Pst), Nut; 1/2", (750), Nut; 1/2", For 790, 850, And 870, Nut; 1/2", (4 To 8 Used), Nut; 1/2", (16" Wheel), Nut; (B: 2.4 M (96 In.)(8 Ft.)) 1/2" (Sub For (8) 14h809), Nut; 1/2", (Use With Ah90897, R.H. Lamp)	2
14***85	Nut; 5/16", (Na-D, Na-G, Dn-01, Gn-01) (Use With T19978), Nut; (A), Nut; (D) (E) (F) 5/16", Nut; 5/16", (Corn Head), Nut; (A: Roll-Gard) 5/16", Nut; (D) 5/16", Nut; 7.925 mm, (Sub For 14h253), Nut; 5/16" (Sub E50101) This Application Only, Nut; 5/16" (Use With R50375), Nut; 5/16", Rh, Nut; 5/16" (Welding Required), Nut; 5/16" 20', Nut; (A: Sound-Gard Body) 5/16", Nut; 5/16", (Sub For Ffsb109291), Nut; 5/16", (8 Used, 6'; 12 Used, 8'), Nut; 5/16" (Fixed Hole Sieve), Nut; (Use With 12h303), Nut; 5/16", (2 Used, 347; 4 Used, 467), Nut; (A: 4-Post Roll-Gard) 5/16", Nut; 5/16", (Also Order T17094, 19h1875, 12h303 And (2) 24h1122), Nut; X 5/16", Nut; (B: Also Includes Sn:) 5/16", Nut; 5/16" (United Kingdom Only), Nut; 5/16", Insecticide Only, Nut; 5/16", (12 Used, Regular; 16 Used, Long), Nut; 5/16", (Use With R50375), Nut; 5/16", (Sub M40699, This Application), Nut; 5/16" 5/16", Nut; (B: Without 4-Post Roll-Gard) 5/16", Nut; 5/16" (Sub For 14h253), Nut; (A: Req. W/Vac. Control Hookup Power Beyond 6000, 7600, 7700, 7800 Tractors) 5/16", Nut; 5/16", (6220,6224), Nut; (B: 60' Boom) 5/16", Nut; (Corn, Grain Straw Chopper), Nut; 5/16", (Sub For Ffsb109290), Nut; 5/16", (6 Bolt), Nut; 5/16", Used With Plastic Moldboard, Nut; 5/16" (Use With Am53945), Nut; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Nut; 5/16", (Sub N10213, This Application), Nut; 7.925 mm, Incld In 18, Nut; 5/16", (Sub For Ffsb109290) (Not Used In This Application), Nut; 5/16" (224 Baler), Nut; 5/16", (Use With Round Hole Sieve), Nut; 5/16" (Use With Round Hole Sieve), Nut; 5/16", 4 Or 8 Used, Nut; 5/16" Rh, Nut; 5/16", (6220), Nut; (Ou)5/16", Nut; 5/16" (Ord Ar91777, Ar72882), Nut; 5/16", (Sub For Mg84943), Nut; 5/16", (Use With R124328), Nut; 5/16", (Corn, Grain Straw Chopper), Nut; 5/16" (Sub N10213), Nut; 5/16", (Use With Adjustable Sieve), Nut; 5/16", (1 Used, Variable Drive; 2 Used, Long), Nut, Nut; 5/16", Nut; 5/16", Nut; (B) 5/16", (Sub For R53671, This Application), Nut; 5/16", (8 Used For 122; 9 Used For 125), Nut; 5/16" Use With The 20ft Auger, Nut; 5/16" Sgb, Nut; (C: (-Xxxxxx) 8560-00*30; 8760-0021) 5/16", Nut; (A: (-Xxxxxx) 4650-0135) 5/16", Nut; 5/16", For Re61095, Nut; 5/16" (A), Nut; (G: Used With Plastic Moldboard) 5/16", Nut; 5/16", Use With The 20ft Auger, Nut; 5/16" (Use With R124328), Nut; 5/16", (Use With At68973) (Use With Ar73144), Nut; 0.312", Nut; (A) (B) (C) 5/16", Nut; 5/16", (10 Used, Regular; 12 Used, Long), Nut; 5/16" (Use With Ah119132), Nut; (B) 5/16", (Ut), Nut; 7.925 mm, Nut; 5/16", (Regular), Nut; 5/16" 5/16, Nut; (A: Quantities Shown Are For One Unit. Two Units Used Per Machine Except Where Indicated With An (A).) 5/16", Nut; 5/16", (Sub For K40002) Used With Plastic Moldboard, Nut; 5/16", 2350, Nut; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Nut; (A) (C) 5/16", Nut; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Nut; 7.925 mm, Incld In 5, Nut; 5/16" (Sub For A22698), Nut; 7.925 mm (5/16"), Nut; (A: For Engine (Cd6068hz001)) 5/16", Nut; (E) 5/16", Nut; 5/16", (6 Used On 660, 8 Used On 680), Nut; (A: (-Xxxxxx) 8560-0090; 8760-0099; 8960-0096) 5/16", Nut; 5/16" 60' Boom, Nut; 5/16" (Hs, Sae 8), Nut; (A: For 390 Mower) 5/16", Nut; 5/16", (12 Used For 122; 13 Used For 125), Nut; X 5/16", Nut; (C) 5/16", Nut; 5/16" (With Harvestrak), Nut; 5/16" (Sub For (2) R128728), Nut; 5/16" (B), Nut; (C) (E) 5/16", Nut; 5/16", (Sub For R53671, This Application), Nut; 5/16", Use With Endwise Transport, Nut; 5/16", (Use With Ah119132), Nut; 5/16", (On 03h1549), Nut; 7.925 mm (5/16") 60' Boom, Nut; 5/16", (Use With R124183), Nut; 7.925 mm, Incld In 6, Nut; 5/16" Sub For 14h253, Nut; 5/16, Nut; 5/16"-18 Nc, Nut; (A) R.Bosch,5/16", Nut; 5/16" 20 Ft Use With The Auger, Nut; 5/16" Incld In 8, Nut; 5/16" Sub For 14h255, Nut; 5/16" (Use With H108670), Nut; (B: W/O 4-Post Roll-Gard) 5/16", Nut; (B) (D) 5/16", Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16" (Straw Chopper), Nut; (A: Included With An220402 Reservoir) 5/16", Nut; 5/16", 141.5 mm (5.57"), Nut; 5/16" (A), (B), Nut; 5/16" (Use With H136957), Nut; (A: W/4-Post Roll-Gard) 5/16", Nut; (B) 5/16", Nut; 5/16" (Sub N10213) This Application, Nut; (A) 5/16", (Battery Cable), Nut; 5/16", (Sub T25249, This Application Only), Nut; (A) 5/16", Nut; (B: For 390 Offset Mower) 5/16" 305mm (12''), Nut; 5/16", (3 Used Twin Swath), Nut; 5/16", For Endwise Transport, Nut; X 5/16", Nut; 5/16", 1350, Nut; 5/16", (70 Used, 660) (80 Used, 670), Nut; 5/16", (Use With T19978), Nut; 5/16", 631, Nut; 5/16"-18 Unc, Nut; 5/16", Sound-Gard Body, Nut; 5/16", For C1232n Only, Nut; 5/16" (C), Nut; (A) 5/16", (Sub For R53671, This Application), Nut; 5/16", (Fixed Rear Axle), Nut; 5/16", 431, Nut; 5/16", (Power Weight Transfer Hitch), Nut; 5/16", (Cornhead Attachment), Nut; 5/16", (Use With A17115 Or A17156 And A13611), Nut; 5/16", 694, Nut; 5/16" Order Complete Lamp, Nut; 5/16" (Use With T19978), Nut; 5/16" (Sub N10213, This Application), Nut; 5/16" (Corn, Grain Straw Chopper), Nut; 5/16", For 610 And 810, Nut; 5/16" (Used With Straw Chopper), Nut; 5/16", (Hill-Drop), Nut; 5/16" (Sgb), Nut; 5/16" Unc, Nut; X X 5/16", Nut; (B: W/O Roll-Gard) 5/16", Nut; 5/16", (Use With E51951), Nut; 5/16" (Use With Ar73144), Nut; 5/16", (Sub. H76696), Nut; (B: For Rubber Moldboard) 5/16", Nut; 5/16", (For 12 Hoe), Nut; 5/16", (Use With Rd. Hole Sieve), Nut; 5/16" (220-5 Used; 222 And 224-10 Used), Nut; 5/16" (With Mechanical Front Wheel Drive), Nut; 7.925 mm (5/16"), Nut; 5/16" (Sub For A22698, This Application, Also Order 24m7238), Nut; 5/16", 20ft. Auger, Nut; (A) (B), Nut; 5/16", (Gas), Nut; 5/16" (4050), Nut; 5/16" Use With The 17 And 20ft Augers, Nut; 5/16", (45 Used 12 Ft., 60 Used 15 Ft.), Nut; (A) 7.925 mm (5/16"), Nut; (A: Contained In Ar87569) 5/16", Nut; 5/16" (Sub M40699, This Application), Nut; (A: (-Xxxxxx) 4050-0045; 4250-0192; 4450-02**58) 5/16", Nut; 5/16" 141.5 mm (5.57"), Nut; 5/16" (Sub E50101)This Application Only, Nut; (A: Install In 1 Select. Control Valve) 5/16", Nut; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Nut; 5/16", Ar, Nut; 5/16", (6 Used, 6-Bolt) (8 Used, 8 Bolt), Nut; (A: Roll-Gard, 4-Post) 5/16"	1

See all parts with full part numbers in Heavy Parts AI →

Need a specific 580 - WINDROWER part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app Source or supply its parts

Post a parts request and compare supplier quotes.