John Deerebackhoe(no series)

John Deere 49 - BACKHOE

Specifications · OEM parts breakdown

Search live 49 - BACKHOE partsSource or supply its parts

Post a parts request and compare supplier quotes.

John Deere 49 - BACKHOE specifications

Weights

Operating weight (with 24-in bucket)696 kg (1535 lbs)

Dimensions

Transport height (with boom fully retracted)2400 mm (94.5 in)
Boom pivot pin height405 mm (16 in)
Transport overhang1400 mm (55 in)
Stabilizer spread width (Down)2900 mm (114 in)

Performance

Digging depth (2-ft flat bottom)2900 mm (114 in)
Loading height2300 mm (90.5 in)
Loading reach1500 mm (59 in)
Reach from swing pivot3800 mm
Boom lift capacity447 kg (985 lbs)

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

All 49 - BACKHOE assemblies by section

Every catalogued assembly group for the John Deere 49 - BACKHOE. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

20 49 Backhoe
John Deere : 49 - Backhoe : 20 49 Backhoe : Backhoe, Wholegoods (Boom, Bucket And Dipperstick) (Serial No. 400005- ) [A23]
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)2
12***02Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70***00) 9550sh ( -70***00)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (70***01- ) 9550sh (70***01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual)2
12***03Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70***00) 9550sh (-70***00)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 70***57-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-00***87; 4250-01***13; 4450-02***14) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-01***46; 4850-00***32) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-00***95; 4450-01***85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Boom And Dipperstick Cylinder [B24]
LV***05Hydraulic Cylinder1
LV***54Tube1
LV***44Rod1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Boom [A19]
19***45Cap Screw; 3/8" X 5-1/2" (Use With 14h812), Cap Screw, Cap Screw; 3/8" X 5-1/2" (Sub For R132459), Cap Screw; 3/8" X 5-1/2", Cap Screw; 3/8" X 5-1/2" (U/W 4" Loader Tubes), Cap Screw; 3/8" X 5-1/2", Code 2309 And 2310, Cap Screw; 3/8" X 5-1/2", Code 2306 And 2307, Cap Screw; 3/8" X 5-1/2"1
19***32Cap Screw; (A: 2wd Non-Powered, Rear Axle) 3/8" X 2-3/4", Cap Screw; 3/8" X 2-3/4" Sae 8, Cap Screw; 3/8" X 2-3/4", (Sub For Na7233), Cap Screw; 3/8" X 2-3/4" Torque To 46 Lb-Ft (63 N-M), Cap Screw; 3/8" X 2-3/4" (Hs, Sae 8) (Sub For Mg88444), Cap Screw; 3/8"X2-3/4", Cap Screw; 3/8" X 2-3/4" (Sub For 19h1944), Cap Screw; 3/8" X 2-3/4", Cap Screw; 3/8" X 2-3/4" ( Am54510 Nla) Please See And Authorized Echo Dealer For Parts, Cap Screw; 9.525 X 69.850 mm, Torque To 46 Lb-Ft (63 N-M), Cap Screw, Cap Screw; (A: (Adjustable Rear Axle) Non-Powered Rear Wheels) 3/8" X 2-3/4", Cap Screw; (B) 3/8" X 2-3/4" (Hs, Sae 8), Cap Screw; 3/8" X 2-3/4", (Sub For 19h1944, Appl), Cap Screw; 3/8" X 2-3/4" (Hs, Sae 8) (Sub For Mg87936 Or Mg88444), Cap Screw; 3/8" X 2-3/4", (Sae 8), Cap Screw; 3/8" X 2-3/4", Code 6212, Cap Screw; 3/8" X 2-3/4" (Hs, Sae 8), Cap Screw; 3/8" X 2-3/4" (Ev), Cap Screw; 3/8" X 2-3/4" (Sub For 19h1944, Appl), Cap Screw; 3/8" X 2-3/4", Cap Screw; 3/8" X 2-3/4" (Use With Re63295), Cap Screw; 9.525 X 69.850 mm, Cap Screw; 3/8" X 2-3/4", (Sae 8) , Up, Cap Screw; 3/8" X 2-3/4", (Use With Ah18661), Cap Screw; 3/8" X 2-3/4" (Hs, Sae 8) Rear, Cap Screw; 3/8" X 2-3/4" (Sae 8), Cap Screw; 3/8" X 2-3/4", (Use With 135 Amp), Cap Screw; 3/8" X 2-3/4", (Sub For 19h1944, This Application), Cap Screw; (A) 3/8" X 2-3/4", Cap Screw; 3/8" X 2-3/4" 3/8"X2-3/4" (Sae 8), Cap Screw; 3/8" X 2-3/4", (Use With Re63295)2
19***87Cap Screw; 3/8" X 1" (Hs, Sae 8), Cap Screw; (A) 3/8" X 1" (Hs, Sae 8), Cap Screw; 3/8" X 1", Cap Screw; 3/8" X 1" (Hs, Sae 8) (Sub For Mg120110)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Bucket And Dipperstick [A21]
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)2
12***02Washer; 1/4", Inner, Washer; 1/4" (Use With 19h1948), Washer; (A) (B) 1/4", Washer; (Sub R74660 And R74661, Appl), Washer; 1/4", Washer; 1/4" (220-50 Used; 222 And 224-60 Used; 230 Rigid-70 Used), Washer; (Use On Ae35774), Washer; 1/4", (Use With Ar53461), Washer; (A) 6.350 mm (1/4"), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb109368), Washer; 1/4" (Use With Re247791), Washer; 1/4" (Sub R74660 And R74661, Appl), Lock Washer; 1/4", (Sub For Ffsb107933), Washer; 1/4" (No Longer Required), Lock Washer; 1/4", Washer; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 1/4", Washer; 1/4" Ar, Washer; (A: 9550 ( -70***00) 9550sh ( -70***00)) 1/4", Washer; (Corn, Grain Straw Chopper), Washer; (3004 And 3005), Washer; 1/4" Low Shaft Speed Monitor, Washer; 1/4", (Sub 12m7065), Washer; 1/4" (Dh-01, Dh-02, Hc-D), Washer; 1/4" (913, 915 - 40 Used;918 - 50 Used), Washer; 1/4" M6, Washer; (A) 1/4", Washer; 1/4", (Sub R62545, R62546, R62547 And (2) R53678), Washer; 1/4", 115 Flail Shredder, Washer; 1/4", (No Longer Required), Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 1/4", Washer; 1/4", Not Used This Application, Washer; (C) 1/4", Washer; (A) R.Bosch,1/4", Washer; 1/4", (Use With 14h786), Washer; 1/4" (Sub For R132721), Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 1/4", Washer; 1/4" (8630), Washer; 1/4" (Ord 12h297), Washer; 1/4", (Sub For Ty4056) (Sub For Pt16034), Washer; (Shroud To Radiator), Washer; 1/4", (Use With Gd1072), Washer; 1/4" (C), Washer; 1/4" (911), Washer; (A: 9550 (70***01- ) 9550sh (70***01- )) 1/4", Washer; 1/4", (Sub For 12h303), Washer; (A: 3 Used Triple, 4 Used Quad) 1/4", Washer; 1/4" (Nlr), Washer; 1/4", (Use With Ar104516), Washer; 1/4" (Sub For W23208), Washer; 1/4", (Use With 19h1948), Washer; 1/4" (For Axe12941), Washer; 1/4" (Sub For R132302), Washer; 1/4" 1/4", Washer; 1/4", (Use With Re273124), Washer; (Sub R74660 And R74661, This Application), Washer; 1/4", (4402,4403), Washer; 1/4", (Ru), Washer; (B) 1/4", Washer; 1/4" (Sub For R132580), Washer; 1/4" (Use With Re273124), Washer; 1/4", (Sub For W36029), Washer; 1/4", 118 Flail Shredder, Washer; 1/4", (Use With Ar91662, Re30685), Washer; 1/4", Dry Hill-Drop Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive) (With High Position Water Pump), Lock Washer; 6.350 mm (1/4") (Sub For Ffsb109368), Washer; (A: 2 Used Dual, 3 Used Triple) 1/4", Washer; (C) (D) 1/4", Washer; 1/4", (4408,4409), Washer; (A: Install In 1 Select. Control Valve) 1/4", Washer; 6.350 mm, (Sub For 12h303), Washer; 1/4", (Export), Washer; 1/4", (4402-4403), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad) (Nlr), Washer; 1/4", (Nlr), Washer; 1/4" (For Ar91662, Re30685), Washer; 1/4", (Sub Ar81175), Washer; 6.350 mm (1/4"), Washer; 1/4", 28" Rows Only, Washer; 1/4", (Code 4402 Electronic Tachometer Drive Or Code 4403 Mechanical And Electronic Tachometer Drive), Washer; 1/4" (Use With Ar104516), Washer; 1/4", (Sub For T11679), Washer; (A), Washer; 1/4", (Ha-D, Hb-D), Washer; 1/4" (A), Washer; 1/4", (Dh-01, Dh-02, Dh-03, Ha-D, Hc-D), Washer; 1/4", Herbicide Only, Washer; 1/4" (Sub For Ch12740), Washer, Washer; 1/4", (4408-4409), Washer; 1/4" (For Az100822), Washer; 1/4", 120 Flail Shredder, Lock Washer; 6.350 mm (1/4"), Washer; 1/4" (2 Used Dual) (3 Used Triple) (4 Used Quad), Washer; 6.350 mm, Washer; 1/4" M6, (2 Used Single) (4 Used Dual)2
12***03Lock Washer; (A: Roll-Gard) 5/16", Lock Washer; 5/16" Pkg R112269), Lock Washer; (C) (E) 5/16", Lock Washer; 5/16", 1350, Lock Washer; (No Longer Required With R105732, R112267 Or R112269), Lock Washer; 5/16" (Use With 19h2043), Lock Washer; R112269), Lock Washer; 5/16" (Use With H108670), Lock Washer; 5/16", (Nlr) (Use With 19h1905), Lock Washer; (A: Note; 9550 (-70***00) 9550sh (-70***00)) 5/16", Lock Washer; (C) 7.938 mm (5/16"), Lock Washer; (B: Without 4-Post Roll-Gard) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Use With Rd. Hole Sieve), Lock Washer; (A: Sound-Gard Body) 5/16", Lock Washer; 5/16", (Hinson), Lock Washer; 5/16" (Eng. Sn 70***57-), Lock Washer; 5/16", (Dh-03, Gh-01), Lock Washer; (Sub F16201), Lock Washer; 5/16", 19h2661), Lock Washer; 5/16", (No Longer Required) (Use With 19h1905), Lock Washer; (A: For Lift Assist Wheels & Electric Hitch For Use W/55 Series Tractors) 5/16", Lock Washer; (A: 4-Post Roll-Gard) 5/16", Lock Washer; (A), Lock Washer; 5/16" (R), Lock Washer; 5/16" (Nlr), Lock Washer; (Use With Ar65812), Lock Washer; 5/16", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a And 853a; 22 Used-854a And 1253a), Lock Washer; (B) 5/16", (Or, Ut), Lock Washer; Ar, 5/16", Lock Washer; 5/16", (Fixed Rear Axle), Lock Washer; 5/16", 60' Boom Only, Lock Washer; 5/16", (Na-D, Na-G, Dn-01, Gn-01), Lock Washer; 5/16" (Sub For Cd13130), Lock Washer; 5/16", (Sub For Mg80681), Lock Washer; 5/16", (A), (B), Lock Washer; 7.938 mm, Lock Washer; 5/16", Insecticide Only, Lock Washer; 5/16", (No Longer Required With 19h2703 Or 19h2661), Lock Washer; 5/16" Sound-Gard Body, Lock Washer; (D) 5/16", Lock Washer; (A) (B) (C) 5/16", Lock Washer; 5/16" M8, Lock Washer; 5/16" (Use With Ah119132), Lock Washer; 5/16", (Use With R26946), Lock Washer; (A: W/4-Post Roll-Gard) 5/16", Lock Washer; (A: For 55 & 60 Series Tractors W/E-H Hitch) 5/16", Lock Washer; 5/16" (Use With Round Hole Sieve), Lock Washer; 5/16", (10 Used, Regular; 12 Used, Long), Lock Washer; X X 5/16", Lock Washer; (C) 5/16", Lock Washer; 5/16", (Not Used With 19h1906 Or 19h2569), Lock Washer; 5/16", (Insecticide Only), Lock Washer; 5/16", For C1232n Only, Lock Washer; 5/16" (No Longer Required With 19h2661), Lock Washer; (A) 5/16", (Sub For Et10703), Lock Washer; 5/16", Ar, Lock Washer; 5/16", Used With Plastic Moldboard, Lock Washer; 5/16", (Code 6204), Lock Washer; 5/16", (Sub N10213, This Application), Lock Washer; (B: Not Required) 5/16", Lock Washer; 5/16" (Spring To Control Support Screw), Lock Washer; 5/16" (Sub For R53669), Lock Washer; 5/16", No. 3, Lock Washer; 5/16" Ar (For R105732, R112267, R112269), Lock Washer; (Access Cover To Timing Gear Cover), Lock Washer; X 5/16", Lock Washer; 5/16", (Use With Code 3104), Lock Washer; 5/6", Lock Washer; 5/16" (4050), Lock Washer; 5/16", (Use With Ar65812), Lock Washer; (A) 7.938 mm (5/16"), Lock Washer; 7.938 mm (5/16"), Lock Washer; 5/16" 5/16", (Sub For Mg80681), Lock Washer; (B: W/O 4-Post Roll-Gard) 5/16", Lock Washer; (A: Install In 1 Select. Control Valve) 5/16", Lock Washer; 5/16", Lock Washer; 5/16", (Af001 Only), Lock Washer; 5/16", (Use With 19h1907), Lock Washer; (A) 5/16", Lock Washer; 5/16" (Use With Am53945), Lock Washer; 5/16", (No Longer Required), Lock Washer; 5/16", For Endwise Transport, Lock Washer; 7.938 mm, (Sub 12m7065), Lock Washer; 5/16" (Corn, Grain Straw Chopper), Lock Washer; (D) 5/16", (Sub For R53669), Lock Washer; 5/16", To Eccentric, Lock Washer; 5/16", 631, Lock Washer; 5/16" (With Harvestrak), Lock Washer; 5/16", (Use With E51951), Lock Washer; 5/16" 5/16", Lock Washer; (Use With (4) 19h1949), Lock Washer; (A: Sound-Gard Body) (C: Not Required When Installing Re19122) 5/16", Lock Washer; 5/16", (Use With Ar59680), Lock Washer; 5/16" Nla, Lock Washer; (A) 5/16", (Sub For 24h1289), Lock Washer; 5/16", (For 12 Hoe), Lock Washer; 5/16", (Sub T25249, This Application Only), Lock Washer; 5/16", (Corn, Grain Straw Chopper), Lock Washer; 8,5 mm, Lock Washer; 5/16" (Use With 19h1905), Lock Washer; 5/16", (Cornhead Attachment), Lock Washer; (B) (D) 5/16", Lock Washer; (A: Not Required) 5/16", Lock Washer; (B) 5/16", Lock Washer; (B: 60' Boom) 5/16", Lock Washer; 5/16", For 610 And 810, Lock Washer; 5/16", (Code 3102), Lock Washer; (B: For 390 Offset Mower) 5/16" 305mm (12''), Lock Washer; (A: Contained In Ar87569) 5/16", Lock Washer; 5/16", (3005) (Af, Af001, Tf), Lock Washer; (A) 5/16", (Sub For R53669), Lock Washer; 5/16", (Use With 19h1905), Lock Washer; 5/16" 60' Boom Only, Lock Washer; X 5/16", Lock Washer; 5/16" Ar, Lock Washer; (B) 5/16", (Ut), Lock Washer; 5/16" (For T30720, T30721), Lock Washer; 5/16" (Use With (4) 19h1949), Lock Washer; (E) 7.938 mm (5/16"), Lock Washer; 5/16", Use With Endwise Transport, Lock Washer; 8 mm, Lock Washer; 5/16", (Use With Ar77343), Lock Washer; (A: For 390 Mower) 5/16", Lock Washer; 5/16", 431, Lock Washer; 5/16" Rh, Lock Washer; 5/16", (Access Cover) (Nlr), Lock Washer; (A) R.Bosch,5/16", Lock Washer; (B), Lock Washer; 5/16", (12 Used, Regular; 16 Used, Long), Lock Washer; (A) (C) 5/16", Lock Washer; (A: (-Xxxxxx) 4050-00***87; 4250-01***13; 4450-02***14) 5/16" (Sub For R53669), Lock Washer; 5/16" (5 Used Dual) (4 Used Triple), Lock Washer; 5/16" (Sgb), Lock Washer; (3005)(Af, Af001, Tf), Lock Washer; 5/16", Side, Fan, Front, Lock Washer; 5/16", 2350, Lock Washer; (Nlr), Lock Washer; 5/16" (Na For R105732, R112267, R112269), Lock Washer; 5/16", (Use With Ah119132), Lock Washer; 5/16", (Nlr), Lock Washer; 5/16" (No Longer Required), Lock Washer; (G: (-Xxxxxx) 4650-01***46; 4850-00***32) 5/16" (Sub For R53669), Lock Washer; (A: Roll-Gard, 4-Post) 5/16", Lock Washer; 7.938 mm (5/16"), Lock Washer; (B: W/O Roll-Gard) 5/16", Lock Washer; X X X 5/16", Lock Washer; 5/16", Access Cover (No Longer Required), Lock Washer; 5/16", (Use With 19h2043) (Nlr), Lock Washer; 5/16" (2 Used, Regular; 4 Used, Special), Lock Washer; 5/16" Incld In 14, Lock Washer; 5/16", (Use With Round Hole Sieve), Lock Washer; (A) (B) 5/16", Lock Washer; 5/16", 4 Or 8 Used, Lock Washer; 5/16", (8 Used For 122; 9 Used For 125), Lock Washer; 5/16", (12 Used-454a; 16 Used-653a, 654a And 853a), Lock Washer; (A: (-Xxxxxx) Serial No. 4250-00***95; 4450-01***85) 5/16" Sgb (Nlr), Lock Washer; (Ou)5/16", Lock Washer; (B) 5/16", (Sub For R53669), Lock Washer; 7.938 mm (5/16") 60' Boom Only, Lock Washer; 5/16" 5/6", Lock Washer; 5/16", (Hinson Cab), Lock Washer; (D) (E) (F) 5/16", Lock Washer; (A: Use With Ar87205) 5/16", Lock Washer; 5/16", (Use With A17115 Or A17156 And A13611), Lock Washer; 5/16", (Nlr) (Use With 19h2043), Lock Washer; 5/16, Lock Washer; 5/16", (Use With Adjustable Sieve), Lock Washer; 5/16", (Also Order T17094, 19h1875, 14h785 And (2) 24h1122), Lock Washer; 5/16", (12 Used For 122; 13 Used For 125), Lock Washer; 5/16", (Used With Plastic Moldboard), Lock Washer; (G: Used With Plastic Moldboard) 5/16", Lock Washer; 5/16", (Sub For Et10732), Lock Washer; 5/16", (8 Used, 6'; 12 Used, 8'), Lock Washer; (E) 5/16", Lock Washer; 5/16" Lh, Lock Washer; 5/16" (220-5 Used; 222 And 224-10 Used), Lock Washer; 5/16", (No Longer Required With 19h2661), Lock Washer; 5/16" (A), Lock Washer, Lock Washer; 5/16", (Sub 12m7065), Lock Washer; 5/16" (Sub 12m7065), Lock Washer; 5/16", (Less Cab), Lock Washer; 5/16" (Sub (2) Ar36875 And R43783), Lock Washer; 5/16", (Sub For R53669), Lock Washer; (D) 5/16", (Sub For R53699, This Application)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Bucket Cylinder [B22]
LV***53Tube1
LV***43Rod1
LV***04Hydraulic Cylinder1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Control Linkage, Handle And Shroud (Serial No. 400005- ) [B07]
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)2
03***19Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)2
03***09Bolt; 5/16" X 1", Bolt; 5/16" X 1" (Disk), Bolt; 5/16" X 1" (Use With 14h819), Bolt; (243, 244, 343, 344, 443, 444, 543, 546, 643, 644, 645, 843, 844), Bolt; 5/16" X 1" (213-8 Used; 215 And 216-10 Used; 218-12 Used; 220, 222, And 224-14 Used), Bolt; 5/16" X 1", Rd. Hd., Bolt; 5/16" X 1", (Grain, Corn And Bean), Bolt; (B) 5/16" X 1", Bolt; 5/16" X 1" (Use With N10213), Bolt, Bolt; X 5/16" X 1", Bolt; 5/16" X 1", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a, And 853a; 22 Used-854a And 1253a), Bolt; 7.925 X 25.400 mm (5/16" X 1"), Bolt; 5/16" X 1" (913-8 Used; 915-10 Used; 918-12 Used; 920, 922, And 924-14 Used; 925-16 Used, 930-20 Used), Bolt; 5/16" X 1", (Use With 12h303, 14h785), Bolt; 5/16" X 1" (913, 915, 918, 920-4 Used; 922, 924 And 925, 6 Used; 930-8 Used) (Thru Backsheet Angles), Bolt; 5/16"X1", Bolt; (W) 5/16" X 1", Bolt; 5/16" X 1" (Square Neck), Bolt; 5/16" X 1" (A), Bolt; (C) 5/16" X 1", Bolt; 7.925 X 25.400 mm (5/16" X 1") Reinforcement To Channel, Bolt; 5/16" X 1" (Sub For H75408), Bolt; (A) 5/16" X 1", Bolt; Rd. Hd., 5/16" X 1", Bolt; 5/16" X 1" (Use With 14h785)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Control Linkage, Handle And Shroud [B05]
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)2
03***19Bolt; 3/8" X 1", Cge.,, Bolt; 3/8" X 1", (K1), Bolt; 3/8" X 1" (Use With 12h304 And 14h812), Bolt; X, Bolt; 3/8" X 1" (1 Used-Rh; 3 Used-Lh), Bolt; 3/8" X 1" (Square Neck), Bolt; 3/8" X 1", (Use With 14h1076 And 12h304), Bolt, Bolt; 3/8" X 1", Bolt; 3/8" X 1", 118 Flail Shredder, Bolt; 3/8" X 1" (Use With Skid Shoes), Bolt; 3/8"X1" (Ord 14m7296, 3m***64), Bolt; X 3/8" X 1", Bolt; 3/8"X1" (Ord 03m7264, 14m7296), Bolt; 3/8" X 1", 115 Flail Shredder, Bolt; 3/8" X 1" (Sub For 10h1026), Bolt; 3/8" X 1", (R.H. Side Only), Bolt; 3/8" X 1", (282 Cotton Stripper), Bolt; 3/8" X 1", (2 Used On R.H. Side Only), Bolt; 3/8" X 1", (Use With Mg622490), Bolt; 3/8" X 1", (Sub For Mg88682), Bolt; (A) 3/8" X 1", Bolt; 3/8" X 1", Rd. Hd., Bolt; 3/8" X 1" (Long), Bolt; 3/8" X 1", (16 Used, 6'; 24 Used, 8'), Bolt; (B) 3/8" X 1", Bolt; 3/8" X 1" (Sub For 03h1615), Bolt; 3/8" X 1", 120 Flail Shredder, Bolt; 3/8" X 1" (Use With 14h812), Bolt; 3/8"X1" (Sub For 03h2070 Appl), Bolt; 3/8" X 1", (Use With 12h304 And 14h1076), Bolt; 3/8"X1", Bolt; X 3/8" X 1", Bolt; 3/8" X 1" (Use With Skid Plates)2
03***09Bolt; 5/16" X 1", Bolt; 5/16" X 1" (Disk), Bolt; 5/16" X 1" (Use With 14h819), Bolt; (243, 244, 343, 344, 443, 444, 543, 546, 643, 644, 645, 843, 844), Bolt; 5/16" X 1" (213-8 Used; 215 And 216-10 Used; 218-12 Used; 220, 222, And 224-14 Used), Bolt; 5/16" X 1", Rd. Hd., Bolt; 5/16" X 1", (Grain, Corn And Bean), Bolt; (B) 5/16" X 1", Bolt; 5/16" X 1" (Use With N10213), Bolt, Bolt; X 5/16" X 1", Bolt; 5/16" X 1", (12 Used-453a And 454a; 16 Used-653a, 654a, 655a, And 853a; 22 Used-854a And 1253a), Bolt; 7.925 X 25.400 mm (5/16" X 1"), Bolt; 5/16" X 1" (913-8 Used; 915-10 Used; 918-12 Used; 920, 922, And 924-14 Used; 925-16 Used, 930-20 Used), Bolt; 5/16" X 1", (Use With 12h303, 14h785), Bolt; 5/16" X 1" (913, 915, 918, 920-4 Used; 922, 924 And 925, 6 Used; 930-8 Used) (Thru Backsheet Angles), Bolt; 5/16"X1", Bolt; (W) 5/16" X 1", Bolt; 5/16" X 1" (Square Neck), Bolt; 5/16" X 1" (A), Bolt; (C) 5/16" X 1", Bolt; 7.925 X 25.400 mm (5/16" X 1") Reinforcement To Channel, Bolt; 5/16" X 1" (Sub For H75408), Bolt; (A) 5/16" X 1", Bolt; Rd. Hd., 5/16" X 1", Bolt; 5/16" X 1" (Use With 14h785)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : End Plate (Rh) [C01]
AM***15Kit; (C) (911) Includes Parts Marked (B), Kit; (A), O-Ring, Kit; (Includes Parts Marked (B)), Kit; (Includes Parts Marked (A)), Kit; (C) (Includes Parts Marked (B)), Kit, Kit; Includes Parts Marked (B), Kit; (C) (900) Includes Parts Marked (B), Kit; (C) Includes Parts Marked (B), Kit; (A) (Includes Parts Marked (B)), Kit; (A) O-Ring, Kit; Seal, Kit; Includes Parts Marked (A), Kit; (D) (Includes Parts Marked (B)), Kit; (F) (Includes Parts Marked (D)), Kit; (D) (Includes Parts Marked (C)), Kit; (A), Kit; (C) Seal Includes Parts Marked (B), Kit; (E) (Includes Parts Marked (D)), Kit; (A) Seal, Kit; Seal, (Sub For (2) Pt8142 And (2) Pt8143), Kit; (A) Includes Parts Marked (B)1
PT***38Valve Cover; Rh (Includes Pt14370), Valve Cover, Valve Cover; Rh End (Includes Pt14370)1
PT***30Kit; Tie Rod Assembly 3 Rods Per Kit, Kit; End Plate, Kit; Tie Rod (3 Rods Per Kit), Kit; Tie Rod 3 Rods Per Kit, Kit; (900) Tie Rod, Kit; Tie Rod1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Front And Rear Hangers (Cast Bar) [B15]
14***41Nut; (A: Use With Scv Setup Panel (Without Cab)) M14, Nut; (A) M14, Nut; M14, Nut; Ar, 14 mm, Nut; (A) 14mm, Nut; (A: Cab/Isolated Open Operator Station: Sn -42***00) M14, Nut; (A) (B) M14, Nut; M14, (Sub For Ch12041), Nut; M14, Nut; M14, (Sub For J950014), Nut; M14 (Sub For 14m7054), Nut; (B) M14, Nut; 14 mm (Sub For 14m7054), Nut; 14mm, Nut; M14, (Sub For Ffsb108115 And J950014), Nut; 14 mm, Nut; M14, (Sub For Ffsb108115), Nut; (A: Used In High Clearance Tractors Too) M14, Nut; (Sub For Ffsb108115), Nut; M14 (A), Nut; M14 Sub For J950014, Nut; (Sub For J950014), Nut; M14 (Sub For J950014)1
19***53Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) (B) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2", Cap Screw; 3/4" X 2-1/2", With Axle Extensions, Cap Screw; 3/4" X 2-1/2", Without Axle Extensions8
19***32Bolt; M14 X 35 (Hs, Head Marked 10.9), Bolt; M14 X 35 (Hs=10.9), Cap Screw; (Sub For J901435), Cap Screw; M14 X 35, (Sub For Ffsb109219), Bolt; M14 X 35, (Sub For Ch12029), Bolt; M14 X 35, (Also Order 12m7068), Bolt; M14x35, Bolt; (Sub For J901435), Bolt; M14 X 35 (Sub For J901435), Bolt; (10.9), Bolt; M14x35 (10.9), Bolt; (A: Used In High Clearance Tractors Too) M14 X 35 (Hs, Head Marked 10.9), Bolt; M14 X 35 (W/ Washer), Bolt; (A) M14 X 35, Cap Screw; M14 X 35, (Sub For J901435), Cap Screw; (Sub For Ffsb109219), Bolt; M14 X 35, (Sub For Mg280854 Or 19m7392), Bolt; M14 X 35 Hs=10.9, Bolt; M14 X 35, Bolt; M14 X 35 (10.9), Bolt; (A) (B) M14 X 35 (Hs, Head Marked 10.9), Bolt, Bolt; M14 X 35 (Sub For Er020967 Appl), Cap Screw; (Sub For J971435), Bolt; (A) M14 X 35 (Hs, Head Marked 10.9), Cap Screw; M14 X 35, Bolt; M14 X 35 (Sub For J921435)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Hydraulic Lines (Bucket/Dipperstick/Boom) [B17]
AH***69Adapter; (A), Adapter, Adapter; Straight3
AM***32Elbow Fitting; 90° (Sub For An31756), Elbow Fitting; 90°, (Sub For An31756), Elbow Fitting, Elbow Fitting; (Sub For An31756)3
AR***17Clamp; (B: Two-Rank), Clamp; (O.D 42 mm), Clamp; (D), Clamp; (A), Clamp; (Sub For Re73582), Clamp, Clamp; (Sub For Ty22467, This Application), Clamp; (C), Clamp; (B: For 9650 (69***01- ) & 9750 (69***01- )) (A), Clamp; Sub For Re73582, Clamp; (B), Clamp; (Sub For Ae43629, Ar65293 Or Ar21840), Clamp, Clamp; (B) (C), Clamp; (Od 42 mm), Clamp; (Use With 38h1519), Clamp; Hydraulic Oil Cooler To Control Valve, Clamp; (Hose)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Hydraulic Lines (Stabilizer/Swing) [B19]
AH***69Adapter; (A), Adapter, Adapter; Straight8
AM***32Elbow Fitting; 90° (Sub For An31756), Elbow Fitting; 90°, (Sub For An31756), Elbow Fitting, Elbow Fitting; (Sub For An31756)6
AP***54Adapter; 3/8" X 3/8", 90°, Adapter; 3/8" Npt X 90°, Adapter; 90°, Adapter, Adapter; (B), Adapter; (Gresen) (1250 Psi), Adapter; 3/8", 90°, Adapter; 3/8" Nptm X 3/8" Nptf X 90°1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Labels (French Canadian) [C13]
LV***30Label; Rh, Warning (Avoid Crushing), Label; Rh Warning2
LV***81Label Kit; (Wholegoods)1
LV***31Label; Caution, Label; Caution (Read Operator'S Manual)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Labels [C12]
JD***07Label; Trademark (Tailgate), Label; Trademark (Tailgate) (Green), Label; Leaping Deere, Label, Label; Leaping Deer, Label; Logo (Tailgate), Label; (Tailgate), Label; Tailgate1
LV***66Label; Caution, Label; Caution (Read Operator'S Manual)2
LV***69Label2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Main Frame And Swing Frame (Serial No. 400005- ) [A17]
11***38Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm2
24***47Washer; 1-1/32" X 1-1/2" X 0.036", (4 Or Less), Washer; .036" X 1-1/32" X 1-1/2", Ar, Washer; 1-1/32" X 1-1/2" X 0.036", Washer; 1-1/32" X 1-1/2" X 0.036" (Use Four Or Less), Washer; 1-1/32" X 1-1/2" X 0.036" Metallic, Round Hole, Washer; 1-1/32" X 1-1/2" X 0.036" (Four Or Less), Washer; 1-1/32" X 1-1/2" X 0.036" (4 Or Less), Washer16
JD***44Lubrication Fitting; 1/4" Straight, Lubrication Fitting; (Sub For Jd5807), Lubrication Fitting; 0,25", Lubrication Fitting; (Sub For Jd5807, This Application), Lubrication Fitting; 1/4", (Sub For Jd7842 And Jd5807), Lubrication Fitting; 1/4" (Sub For Jd7779), Lubrication Fitting; (Sub For Jd7788), Lubrication Fitting; (A: Main Frame) (B: Wing Frame), Lubrication Fitting; Straight (Sub For Jd7797), Lubrication Fitting; (A), (Sub For Jd7797)Straight, Lubrication Fitting; (A: Category 3) (B: Category 4), Lubrication Fitting; (A: Surface Wrap), Lubrication Fitting; 1/4-28 (Straight) (Sub For Jd7842, This Application), Lubrication Fitting; 1/4" (Sub For Jd7797), Lubrication Fitting; Straight, Lubrication Fitting; (A)1/4", Straight, Lubrication Fitting; 7/8" X 2-1/4", Lubrication Fitting; (Use With An261942), Lubrication Fitting; Lh, Rh, Lubrication Fitting; 1/4"-St, Lubrication Fitting; 1/4", Straight, Lubrication Fitting; (D: On Opposite Sides Of Outer Shaft), Lubrication Fitting; (A) (Sub For Jd7797, This Application), Lubrication Fitting; (For Key 16), Lubrication Fitting; 1/4" (For Dc44983, Dc46177), Lubrication Fitting; 1/4" Lh, Rh, Lubrication Fitting; (4.8 M (16-Ft.), Lubrication Fitting; Straight, 1/4", (Sub For Jd7797), Lubrication Fitting; (Roll Uses 12) (Impeller Uses 6), Lubrication Fitting; (A) (Sub For Jd7797) 1/4", Straight, Lubrication Fitting; (A) 1/4", Straight, (Sub For Jd7797), Lubrication Fitting; (Sub For Jd7799, And T162396this Application), Lubrication Fitting; 1/4", (Sub For Jd7797, This Application), Lubrication Fitting; 1/4", (Sub For Mg87414), Lubrication Fitting; 1/4", Straight (With Or Without Iron-Gard) (Sub For Jd7797), Lubrication Fitting; Model 8w, 10w, 10n And 12n, Lubrication Fitting; 1/4", Lubrication Fitting; 1/4" (Sub For Jd7788), Lubrication Fitting; Straight (1/4" Tapered), Lubrication Fitting; (Sub For Jd7806, This Application)90°, Lubrication Fitting; (B) 1/4", Lubrication Fitting; With Electric Downstop, Lubrication Fitting; (Sub For Jd5807) Straight, Lubrication Fitting; (Sub For Jd7797) (Per Wheel), Lubrication Fitting; (A: For Msl), Lubrication Fitting; 1/4" Straight (Sub For Jd7797), Lubrication Fitting; 1/4, Lubrication Fitting; (Sub For Es10385), Lubrication Fitting; (Sub For Jd7797) (2 Used, 660, 670) (3 Used, 671), Lubrication Fitting; (Sub For Jd7798, This Application), Lubrication Fitting; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) (D: Main Frame (5 Section) Single Point), Lubrication Fitting; 1/4", Straight, (Sub For Jd7842 And Jd5807), Lubrication Fitting; (A), (Sub For Jd7797) Straight, Lubrication Fitting; 1/4", Self-Tapping, Lubrication Fitting; (Straight), Lubrication Fitting; (A: - Xxxxxx 457( - 31***00) 557( - 31***50) 457s( - 31***00)), Lubrication Fitting; (Use With An183318), Lubrication Fitting; (Sub For Jd7759, This Application), Lubrication Fitting; (C: Straight), Lubrication Fitting; (A), Lubrication Fitting; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer), Lubrication Fitting; 1/4", (Sub For Jd7797), Lubrication Fitting; 1/4" (For Ae47191, Ae47745, E77771), Lubrication Fitting; (For Am105168), Lubrication Fitting; (A) Straight, Lubrication Fitting; 1/4", Straight (4 Used, Auger Platforms) (2 Used, Draper Platforms) (Sub For Jd7797), Lubrication Fitting; (C) (Use With Ah212651 Or Ah218293), Lubrication Fitting; (Sub For Jd7842, This Application), Lubrication Fitting; (A: 12'-6" To 27'-6"), Lubrication Fitting; 1/4-28 (Special Threads) (Straight), Lubrication Fitting; (Use With Ah204016), Lubrication Fitting; (Use With Ah212335), Lubrication Fitting; Self-Tapping, Lubrication Fitting; Lgth=1x14mm, Lubrication Fitting; 1/4" (For Dc32636), Lubrication Fitting; (Use With Ahc10023), Lubrication Fitting; 1/4" Self-Tapping, Lubrication Fitting; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models), Lubrication Fitting; Self-Tapping Threads, Lubrication Fitting; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) (D: Mainframe, (5 Section) Singlepoint), Lubrication Fitting; 1/4", Straight, Grease, Lubrication Fitting; (A: Separate Fertilizer Placement), Lubrication Fitting; (Sub For Mg87414), Lubrication Fitting; (Use With Ae49360), Lubrication Fitting; (For Key13), Lubrication Fitting; (A) (Sub For Jd7797) 1/4", Lubrication Fitting, Lubrication Fitting; 1/4" (For Dc57223, Dc57224), Lubrication Fitting; (Sub For Jd7781, This Appli And T162396cation, Jd7799), Lubrication Fitting; (Sub For Jd7797), Lubrication Fitting; 1/4" (For Dc55460), Lubrication Fitting; Straight, 1/4" Tapered, Lubrication Fitting; (A) 1/4", Lubrication Fitting; 1/4" -28, (Sub For Mg87414), Lubrication Fitting; (16'0" Flex Fold), Lubrication Fitting; (Use With Ah131562), Lubrication Fitting, Lubrication Fitting; (Sub For Jd7797) 1/4" Straight, Lubrication Fitting; (A), (B), Lubrication Fitting; Straight, 1/4", Lubrication Fitting; Incld In 9, Lubrication Fitting; (Sub For Jd7797) Straight, Lubrication Fitting; (A) (Sub For Jd7797), Lubrication Fitting; 1/4", Straight (Sub For Jd7797), Lubrication Fitting; (A: - Xxxxxx 467( - 31***00) 567( - 31***50) 467s( - 31***00)), Lubrication Fitting; 1/8" Straight, Lubrication Fitting; 1/4-28 (Straight) (Special), Lubrication Fitting; (A) (B), Lubrication Fitting; (A), Straight, (Sub For Jd7797), Lubrication Fitting; Thread Forming, Lubrication Fitting; 1/4°, (Sub For Jd7797), Lubrication Fitting; 1/4", (Sub For Jd7977), Lubrication Fitting; (4 Used For 660 Single Chain, 8 Used For 680 And 660 Double Chain), Lubrication Fitting; 1/4" Straight, (Sub For Jd7797), Lubrication Fitting; (Sub For Jd7797, This Application) 1/4", Lubrication Fitting; 1/4", Straight (With Iron-Gard) (Sub For Jd7797), Lubrication Fitting; (Sub For Jd7819, This Application), Lubrication Fitting; (A) 1/4", (Sub For Jd7797), Lubrication Fitting; (B), Lubrication Fitting; (Sub For Et11494), Lubrication Fitting; (Sub For Jd7797, This Application) Grease, 1/4", Lubrication Fitting; 1/4", Straight, (Sub For Jd7797), Lubrication Fitting; (Sub For Jd7797) 1/4", Lubrication Fitting; (K), Lubrication Fitting; (Sub For Jd7844) Straight, Lubrication Fitting; (A) 1/4" Straight (Self Tapping) (Not Used With Ae57756), Lubrication Fitting; (Use With E78694), Lubrication Fitting; Straight, (Sub For Jd7797), Lubrication Fitting; Straight, 1/4" (4 Used, Auger Platforms) (2 Used, Draper Platforms) (Sub For Jd7797), Lubrication Fitting; (A) (C: Xxxxxx - 457(31***01 - ) 557(31***51 - ) 457s(31***01 - )) (Use With Ah212651, Ah218293 Or Ah221260), Lubrication Fitting; 1/8", Lubrication Fitting; (With Electric Downstop), Lubrication Fitting; (B) (D), Lubrication Fitting; 1/4-28, Lubrication Fitting; (Use With N218508)5
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Main Frame And Swing Frame [A15]
11***38Cotter Pin; 6.300 X 40 mm (Sub For Er040408 Appl), Cotter Pin; 6.300 X 40 mm, (1 Used L.H.) (1 Used R.H.), Cotter Pin; 6.300 X 40 mm, (Double Auger), Cotter Pin; 6.300 X 40 mm, (Sub For 11h215), Cotter Pin; 6.300 X 40 mm (Sub For 11m7028), Cotter Pin; (A) 6x40mm, Cotter Pin; (A) 6,3 X 40 mm, Cotter Pin; (A) 6 X 40 mm, Cotter Pin, Cotter Pin; 6.300 X 40 mm, (Sub N282631, 24h1459 And K40018), Cotter Pin; (C) 0.248" X 1.575", Cotter Pin; 6.300 X 40 mm, Cotter Pin; 6 X 45 mm, Cotter Pin; 6x45mm, Cotter Pin; 6 X 40 mm, Cotter Pin; 6,3 X 45 mm, Cotter Pin; (A: (Use W/Planters Equipped W/Lift Assist Wheels) (B: & Frame Drive/Gauge Wheels Rear Mounted)) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, Category I, Cotter Pin; (A: Use On Bearing Side Of Shaft, A58822 (Key 19)) 6.300 X 40 mm, Cotter Pin; 6,3 X 40 mm, Cotter Pin; (A) 0.248" X 1.575", Cotter Pin; 0.248" X 1.575", Cotter Pin; 6x40mm, Cotter Pin; 6.3x40mm, Cotter Pin; (A) 6.300 X 40 mm, Cotter Pin; (A: Only For North America And Japan) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm (Sub For Ty7162), Cotter Pin; 6,3 X 40mm, Cotter Pin; 6.300 X 40 mm Nsep (Ord Dc49652), Cotter Pin; 6,3x40mm, Cotter Pin; (A: 9550 (69***01- ) 9550sh (69***01- )) 6.300 X 40 mm, Cotter Pin; 6.300 X 40 mm, (780, 800, And 830), Cotter Pin; M6 X 45, Cotter Pin; (B) 6,3 X 40 mm, Cotter Pin; 6.300 X 40 mm, (Use With N34497), Cotter Pin; 6,3x45mm, Cotter Pin; 6.300 X 40 mm Lh, Rh, Cotter Pin; 6.300 X 40 mm (0.248" X 1.575"), Cotter Pin; (A), Cotter Pin; 6.3 X 40mm2
24***47Washer; 1-1/32" X 1-1/2" X 0.036", (4 Or Less), Washer; .036" X 1-1/32" X 1-1/2", Ar, Washer; 1-1/32" X 1-1/2" X 0.036", Washer; 1-1/32" X 1-1/2" X 0.036" (Use Four Or Less), Washer; 1-1/32" X 1-1/2" X 0.036" Metallic, Round Hole, Washer; 1-1/32" X 1-1/2" X 0.036" (Four Or Less), Washer; 1-1/32" X 1-1/2" X 0.036" (4 Or Less), Washer16
JD***44Lubrication Fitting; 1/4" Straight, Lubrication Fitting; (Sub For Jd5807), Lubrication Fitting; 0,25", Lubrication Fitting; (Sub For Jd5807, This Application), Lubrication Fitting; 1/4", (Sub For Jd7842 And Jd5807), Lubrication Fitting; 1/4" (Sub For Jd7779), Lubrication Fitting; (Sub For Jd7788), Lubrication Fitting; (A: Main Frame) (B: Wing Frame), Lubrication Fitting; Straight (Sub For Jd7797), Lubrication Fitting; (A), (Sub For Jd7797)Straight, Lubrication Fitting; (A: Category 3) (B: Category 4), Lubrication Fitting; (A: Surface Wrap), Lubrication Fitting; 1/4-28 (Straight) (Sub For Jd7842, This Application), Lubrication Fitting; 1/4" (Sub For Jd7797), Lubrication Fitting; Straight, Lubrication Fitting; (A)1/4", Straight, Lubrication Fitting; 7/8" X 2-1/4", Lubrication Fitting; (Use With An261942), Lubrication Fitting; Lh, Rh, Lubrication Fitting; 1/4"-St, Lubrication Fitting; 1/4", Straight, Lubrication Fitting; (D: On Opposite Sides Of Outer Shaft), Lubrication Fitting; (A) (Sub For Jd7797, This Application), Lubrication Fitting; (For Key 16), Lubrication Fitting; 1/4" (For Dc44983, Dc46177), Lubrication Fitting; 1/4" Lh, Rh, Lubrication Fitting; (4.8 M (16-Ft.), Lubrication Fitting; Straight, 1/4", (Sub For Jd7797), Lubrication Fitting; (Roll Uses 12) (Impeller Uses 6), Lubrication Fitting; (A) (Sub For Jd7797) 1/4", Straight, Lubrication Fitting; (A) 1/4", Straight, (Sub For Jd7797), Lubrication Fitting; (Sub For Jd7799, And T162396this Application), Lubrication Fitting; 1/4", (Sub For Jd7797, This Application), Lubrication Fitting; 1/4", (Sub For Mg87414), Lubrication Fitting; 1/4", Straight (With Or Without Iron-Gard) (Sub For Jd7797), Lubrication Fitting; Model 8w, 10w, 10n And 12n, Lubrication Fitting; 1/4", Lubrication Fitting; 1/4" (Sub For Jd7788), Lubrication Fitting; Straight (1/4" Tapered), Lubrication Fitting; (Sub For Jd7806, This Application)90°, Lubrication Fitting; (B) 1/4", Lubrication Fitting; With Electric Downstop, Lubrication Fitting; (Sub For Jd5807) Straight, Lubrication Fitting; (Sub For Jd7797) (Per Wheel), Lubrication Fitting; (A: For Msl), Lubrication Fitting; 1/4" Straight (Sub For Jd7797), Lubrication Fitting; 1/4, Lubrication Fitting; (Sub For Es10385), Lubrication Fitting; (Sub For Jd7797) (2 Used, 660, 670) (3 Used, 671), Lubrication Fitting; (Sub For Jd7798, This Application), Lubrication Fitting; (A: Main Frame, Wing Frame (3 Section)) (B: Main Frame (5 Section) Accu Depth) (C: Wing (3 Section Low Transport)(5 Section Inner/Outer) Rigid Mainframe) (D: Main Frame (5 Section) Single Point), Lubrication Fitting; 1/4", Straight, (Sub For Jd7842 And Jd5807), Lubrication Fitting; (A), (Sub For Jd7797) Straight, Lubrication Fitting; 1/4", Self-Tapping, Lubrication Fitting; (Straight), Lubrication Fitting; (A: - Xxxxxx 457( - 31***00) 557( - 31***50) 457s( - 31***00)), Lubrication Fitting; (Use With An183318), Lubrication Fitting; (Sub For Jd7759, This Application), Lubrication Fitting; (C: Straight), Lubrication Fitting; (A), Lubrication Fitting; (A: Main Frame, Wingframe (3 Section)) (B: Main Frame (5 Section)) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer), Lubrication Fitting; 1/4", (Sub For Jd7797), Lubrication Fitting; 1/4" (For Ae47191, Ae47745, E77771), Lubrication Fitting; (For Am105168), Lubrication Fitting; (A) Straight, Lubrication Fitting; 1/4", Straight (4 Used, Auger Platforms) (2 Used, Draper Platforms) (Sub For Jd7797), Lubrication Fitting; (C) (Use With Ah212651 Or Ah218293), Lubrication Fitting; (Sub For Jd7842, This Application), Lubrication Fitting; (A: 12'-6" To 27'-6"), Lubrication Fitting; 1/4-28 (Special Threads) (Straight), Lubrication Fitting; (Use With Ah204016), Lubrication Fitting; (Use With Ah212335), Lubrication Fitting; Self-Tapping, Lubrication Fitting; Lgth=1x14mm, Lubrication Fitting; 1/4" (For Dc32636), Lubrication Fitting; (Use With Ahc10023), Lubrication Fitting; 1/4" Self-Tapping, Lubrication Fitting; (N: 10 Foot Main Frame Model) (R: 11-1/2 Foot And 14-1/2 Foot Main Frame Models), Lubrication Fitting; Self-Tapping Threads, Lubrication Fitting; (A: Main Frame, Wingframe (3 Section) Except Low Transport Wing) (B: Main Frame (5 Section) All Depth) (C: Wing (3 Section Low Trans., 5 Section Inner/Outer)) (D: Mainframe, (5 Section) Singlepoint), Lubrication Fitting; 1/4", Straight, Grease, Lubrication Fitting; (A: Separate Fertilizer Placement), Lubrication Fitting; (Sub For Mg87414), Lubrication Fitting; (Use With Ae49360), Lubrication Fitting; (For Key13), Lubrication Fitting; (A) (Sub For Jd7797) 1/4", Lubrication Fitting, Lubrication Fitting; 1/4" (For Dc57223, Dc57224), Lubrication Fitting; (Sub For Jd7781, This Appli And T162396cation, Jd7799), Lubrication Fitting; (Sub For Jd7797), Lubrication Fitting; 1/4" (For Dc55460), Lubrication Fitting; Straight, 1/4" Tapered, Lubrication Fitting; (A) 1/4", Lubrication Fitting; 1/4" -28, (Sub For Mg87414), Lubrication Fitting; (16'0" Flex Fold), Lubrication Fitting; (Use With Ah131562), Lubrication Fitting, Lubrication Fitting; (Sub For Jd7797) 1/4" Straight, Lubrication Fitting; (A), (B), Lubrication Fitting; Straight, 1/4", Lubrication Fitting; Incld In 9, Lubrication Fitting; (Sub For Jd7797) Straight, Lubrication Fitting; (A) (Sub For Jd7797), Lubrication Fitting; 1/4", Straight (Sub For Jd7797), Lubrication Fitting; (A: - Xxxxxx 467( - 31***00) 567( - 31***50) 467s( - 31***00)), Lubrication Fitting; 1/8" Straight, Lubrication Fitting; 1/4-28 (Straight) (Special), Lubrication Fitting; (A) (B), Lubrication Fitting; (A), Straight, (Sub For Jd7797), Lubrication Fitting; Thread Forming, Lubrication Fitting; 1/4°, (Sub For Jd7797), Lubrication Fitting; 1/4", (Sub For Jd7977), Lubrication Fitting; (4 Used For 660 Single Chain, 8 Used For 680 And 660 Double Chain), Lubrication Fitting; 1/4" Straight, (Sub For Jd7797), Lubrication Fitting; (Sub For Jd7797, This Application) 1/4", Lubrication Fitting; 1/4", Straight (With Iron-Gard) (Sub For Jd7797), Lubrication Fitting; (Sub For Jd7819, This Application), Lubrication Fitting; (A) 1/4", (Sub For Jd7797), Lubrication Fitting; (B), Lubrication Fitting; (Sub For Et11494), Lubrication Fitting; (Sub For Jd7797, This Application) Grease, 1/4", Lubrication Fitting; 1/4", Straight, (Sub For Jd7797), Lubrication Fitting; (Sub For Jd7797) 1/4", Lubrication Fitting; (K), Lubrication Fitting; (Sub For Jd7844) Straight, Lubrication Fitting; (A) 1/4" Straight (Self Tapping) (Not Used With Ae57756), Lubrication Fitting; (Use With E78694), Lubrication Fitting; Straight, (Sub For Jd7797), Lubrication Fitting; Straight, 1/4" (4 Used, Auger Platforms) (2 Used, Draper Platforms) (Sub For Jd7797), Lubrication Fitting; (A) (C: Xxxxxx - 457(31***01 - ) 557(31***51 - ) 457s(31***01 - )) (Use With Ah212651, Ah218293 Or Ah221260), Lubrication Fitting; 1/8", Lubrication Fitting; (With Electric Downstop), Lubrication Fitting; (B) (D), Lubrication Fitting; 1/4-28, Lubrication Fitting; (Use With N218508)5
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Main Relief Valve [B25]
LV***64Relief Valve1
LV***63Relief Valve1
PT***31Kit; Seal Includes Parts Marked (A), Kit; Main Relief Includes Seal, Poppet, Piston Ring, (2) O-Rings, And Washer, Kit, Kit; Main Relief Valve, Kit; (Includes Parts Marked (A)), Kit; Main Relief Valve Includes Seal, Poppet, Piston Ring, (2) O-Rings, And Washer, Kit; Includes Parts Marked (A), Kit; Seal (Includes Parts Marked (A)), Kit; Main Relief Valve Seal (Includes Parts Marked (A)), Kit; Main Relief Valve (Includes Parts Marked (A)), Kit; Main Relief Valve (Includes (1) Seal, (1) Poppet, (1) Piston Ring, (2) O-Rings And (1) Washer)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Seat, Bracket And Footrest (Serial No. 400005- ) [B11]
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)6
03***39Bolt; 1/2" X 1-3/4" Long, Bolt; Cgb., 1/2" X 1-3/4", Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Square Neck), Bolt; 1/2" X 1-3/4", (Regular), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" (Use With 14h1040), Bolt; 1/2" X 1-3/4" T - Tank, Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt, Bolt; 1/2" X 1-3/4", (Long), Bolt; 1/2" X 1-3/4" Regular, Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Rd. Hd.4
08***16Bolt; 5/16" X 1-1/4" (Low Position), Bolt; 5/16" X 1-1/4", Bolt; 5/16" X 1-1/4" (Square Head)4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Seat, Bracket And Footrest [B09]
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)2
03***39Bolt; 1/2" X 1-3/4" Long, Bolt; Cgb., 1/2" X 1-3/4", Bolt; 1/2"X1-3/4", Bolt; 1/2" X 1-3/4" (Square Neck), Bolt; 1/2" X 1-3/4", (Regular), Bolt; (A: Use With 3 Tine), Bolt; 1/2" X 1-3/4" (Use With 12h301 And 14h1040), Bolt; 1/2" X 1-3/4" (Use With 14h1040), Bolt; 1/2" X 1-3/4" T - Tank, Bolt; 1/2" X 1-3/4", Bolt; (B) 1/2" X 1-3/4", Bolt, Bolt; 1/2" X 1-3/4", (Long), Bolt; 1/2" X 1-3/4" Regular, Bolt; 1/2" X 1-3/4" (Use With 14h1040 And 12h301), Bolt; 1/2" X 1-3/4", Rd. Hd.4
12***01Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)4
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Stabilizer (Serial No. 400005- ) [B03]
03***68Bolt; X 5/16" X 3/4", Bolt; (B) (C) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Israel), Bolt; 5/16" X 3/4", Bolt; 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (Corn Head), Bolt; 5/16" X 3/4" (A), Bolt; X 5/16" X 3/4", Bolt; 5/16" X 3/4", (For 11" (279 mm) Or 12" (305 mm) Only), Bolt; 5/16" X 3/4" (Sub For Am121004), Bolt; 5/16" X 3/4", 431, Bolt; 5/16" X 3/4" (Sub For 03h1540), Bolt; 5/16" X 3/4", (1 Used Hoe; 3 Used Disk), Bolt; 5/16" X 3/4" (Bottom), Bolt; (Sub For Mg280327), Bolt; X 5/16" X 3/4", Bolt; (A) 5/16" X 3/4" (Square Neck), Bolt; 5/16" X 3/4", (8 Used, 6'; 12 Used, 8'), Bolt, Bolt; 5/16" X 3/4", Carriage, Bolt; 5/16" X 3/4", Insecticide Only, Bolt; 5/16" X 3/4", (675b), Bolt; 5/16" X 3/4" (Use With 14h785), Bolt; 5/16" X 3/4" Long Row, Bolt; 5/16" X 3/4", (11" Or 12" Only), Bolt; 5/16" X 3/4", (Sub For Mg280327), Bolt; 5/16" X 3/4", Lower, Bolt; 5/16"X3/4", Bolt; 5/16" X 3/4 (Sub For 03h1540), Bolt; 5/16" X 3/4", 631, Bolt; 5/16" X 3/4", (4.6 M (15-Ft.), 5.5 M (18-Ft.) And 6.4 M (21-Ft.) Platforms), Bolt; 5/16" X 3/4", (Rear), Bolt; 7.925 X 19.050 mm (5/16" X 3/4"), Bolt; (A) 5/16" X 3/4", Bolt; 5/16" X 3/4", 280 mm Or 305 mm Only (11" Or 12" Only), Bolt; (B) 5/16" X 3/4", Bolt; 5/16" X 3/4", (Use With E51951)6
11***15Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038)4
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)8
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Stabilizer Cylinder [B23]
AM***99Hydraulic Cylinder; Black Paint, Hydraulic Cylinder1
AM***31Tube1
AM***37Seal Kit, Seal Kit; (Includes Parts Marked (A))1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Stabilizer [B01]
11***15Arm; (A) 1/4" X 1-1/2", Arm; (A) 1/4"X1-1/2", Arm; 1/4" X 1-1/2", Arm; (A), Arm; 1/4" X 1-1/2", Category I, Arm; 1/4" X 1-1/2", (Sub 11m7038), Arm, Arm; 1/4" X 1-1/2", For 6-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide, 8-Row Narrow, 8-Row Wide, Arm; 1/4" X 1-1/2", 12-Row Narrow, Arm; 1/4" X 1-1/2", For 6-Row Wide And 8-Row Narrow, Arm; 1/4" X 1-1/2", Use A3581r Or 11h215 (Sub 11m7038)4
11***18Cotter Pin; (A) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/4", Cotter Pin; 3/6"X1/2", Cotter Pin; 3/16" X 1-1/2" (230), Cotter Pin; 3/16" X 1-1/2" (215), Cotter Pin; 3/16" X 1-1/2, Cotter Pin; 3/16" X 1-1/2", Center Hopper 6-Row, Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; X 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 760 And 790, Cotter Pin; 3/16" X 1-1/2", Category 2, Cotter Pin; 3/16" X 1-1/2", For 12-Row Narrow, Cotter Pin; 3/16" X 1-1/2" (224), Cotter Pin; (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" Lh, Cotter Pin, Cotter Pin; 3/16" X 1-1/2", 8-Row Narrow, Cotter Pin; (B) 3/16" X 1-1/2", Cotter Pin; 4.775 X 38.100 mm (3/16" X 1-1/2"), Cotter Pin; 3/16" X 1-1/2" (Sub For 11m1402), Cotter Pin; 3/16" X 1-1/2", For 810, Cotter Pin; (E) 3/16" X 1-1/2", Cotter Pin; 3/8" X 1-1/2", Cotter Pin; (A) 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2", For 4-Row, Cotter Pin; 3/16" X 1-1/2", 6-Row Narrow And 6-Row Wide, Cotter Pin; 3/16" X 1/2", Cotter Pin; 3/16"X1-1/4", Cotter Pin; 3/16" X 1-1/2", (Use With Bm22179), Cotter Pin; (B) (C) 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 8-Row Narrow, 8-Row Wide, Cotter Pin; 3/16" X 1-1/2", (Use With N60865), Cotter Pin; (A) (B) 3/16" X 1-1/2", Cotter Pin; 3/16"X1-1/2", Cotter Pin; 3/16" X 1-1/2" (Sub H95042), Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2", For 600 And 610, Cotter Pin; 3/16" X 1-1/2", For 6-Row Wide, Cotter Pin; 3/16" X 1-1/2" (216), Cotter Pin; 3/16" X 1-1/2", (2 Or 3 Used), Cotter Pin; 3/16" X 1-1/2" (222), Cotter Pin; 3/16" X 1-1/2", Cotter Pin; 3/16" X 1-1/2" 3/16" X 1-1/4", Cotter Pin; 4.775 X 38.100 mm, Cotter Pin; 3/16" X 1-1/2", For 400, Cotter Pin; 3/16" X 1-1/2", (Sub 11m7030), Cotter Pin; 3/16" X 1-1/2", For 6-Row Narrow, Cotter Pin; 3/16"X1"-1/2", Cotter Pin; 3/16" X 1-1/2" (213), Cotter Pin; 3/16 X 1-1/2", Cotter Pin; 3/16" X 1-1/2" (220), Cotter Pin; 3/16" X 1-1/2" (Use With Gauge Wheel)8
12***01Washer; 3/8", (Sub For Mg280295 Or 12h331), Washer; 1/2" 1/2 Zn, Washer; 1/2", (Use With Adjustable Sieve), Washer; 1/2", (2 Used - 443,-62***50; 444,-62***00; 543, -38***00)(4 Used - 546,-62***00; 643,-61***43; 642,842,-33***00; 644,-61***16; 645;-62***00; 843,-61***66, 844,-62***00; 1243,-62***50), Washer; 12.700 mm (1/2"), Washer; 1/2", (Rc), Washer; (C) (D) 1/2", Lock Washer; 12.700 mm (1/2"), Washer; 1/2", (Use With Ah90897, R.H. Lamp), Lock Washer; (Sub For A590912), Washer; (A) (B) 1/2", Lock Washer; 1/2", (Sub For Ffsb108085 Or Ffsb107139), Washer; 5/8", Washer; (Sub F16204), Washer; 1/2", For 6-Row Planters Only, Washer; 1/2" X 1-1/2", Washer; 1/2", (Sub For 12h292), Washer; (C: 2.7 M (108 In.)(9 Ft.)) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139 Or A590912), Washer; 1/2" Into A/C Compressor, Washer; 1/2" (A) (Sub For P3629h), Washer; 1/2" 8 Ft., Washer; (A: Oversize Tires) 1/2", Lock Washer; 1/2", (Use With R125195), Washer; (A: ( -Xxxxxx) Serial No. 8450-00***01; 8650-00***01) 1/2", Washer; (B: Without Remote Cylinder (2 Used)) 1/2", Washer; 1/2" (Sb78), Washer; 1/2" (Use With Kv17192 Or Kv17074), Washer; 1/2", (Into Header With Keyed Hub), Washer; 1/2" (Sub For R30403), Lock Washer; 12.700 mm (1/2") (Sub For Ffsb107139), Washer; 1/2" L.H., Washer; (A: Remote Cylinder) 1/2", Washer; 1/2", (Ru And Or), Washer; 1/2" Tow Behind, Lock Washer; 12.700 mm, (Sub For A590912), Washer; 1/2"(3"X8"), Washer; 1/2" (Use With Kv20260), Washer; 1/2", (Regular), Washer; 1/2" Lh, Washer; 1/2", (Dh-01, Dh-03, Gh-01, Ha-D), Washer; 1/2", (3 Used, With Corn Head; 4 Used, With Cutting Platform), Washer; 1/2", (Use With Ah96091 Or Ah154960), Washer; 1/2", (Sub For P3629h), Lock Washer; 12.700 mm, Washer; (Sub For F16204), Washer; (B: Less Remote Cylinder) 1/2" (Nlr), Washer; 1/2" (1/2"), Washer; 1/2", (Use With Ah96091 Or Ah171845), Washer; 1/2" (2 Used, Regular; 4 Used, Special), Washer; 1/2", (2 Used A (4 Used B), Washer; 1/2", (Nlr), Washer; (B), Washer; 1/2" (Nlr), Washer; 1/2" Incld In 15, Washer; (B) (D) 1/2", Lock Washer; 12.700 mm (1/2") (Sub For Ffsb106424), Washer; (A: See Key 33) 1/2", Washer; 1/2", (4 To 8 Used), Washer; 1/2" (Use With Ah90897), Washer; 1/2" (Use With H109640), Washer; (B: Tractor Serial No.) 1/2", Washer; 1/2" (Not Used This Application), Washer; 1/2", Washer; 1/2", (Use With Heavy-Duty Drawbar), Washer; 1/2" Cover, Washer; 1/2", Double Disk Opener, Washer; (A), Washer; (A: Mg803115 Light Kit) 1/2", Washer; 1/2", (Heavy-Duty And 4-Wheel Drive Axle), Washer; X X 1/2", Washer; 1/2", Front, Washer; (B: Less Remote Cylinder) 1/2", Washer; (A: Serial No For 360 (00***00-00***99), 370 (00***00-00***99), 390 (00***00-00***99)) 1/2", Washer; 1/2", For 4 648 mm (15') Harrow, Washer; 1/2" (Flex), Washer; 1/2", (Sub For Mg280295 Or 12h331), Washer; (A: Incld In Cb11434198 Fan) 1/2", Washer; 1/2", (2 Used Single) (4 Used Dual), Washer; 1/2" (W/ Ae33160), Washer; (A: Note; 9550 ( -70***00) 9550sh ( -70***00)) 1/2", Washer; 1/2" M12, Washer; (A) (B) 12.700 mm (1/2"), Washer; 1/2" Sub For A590912, Washer; 1/2", (Kit An193805), Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single, 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; 1/2", For 5 Section, Washer; 1/2" Incld In 10, Washer; (B) 1/2", (Ut), Washer; (B) 1/2", Washer; 1/2", For 4 Section, Washer; 1/2" (Use With Ah96091 Or Ah154960), Washer; 1/2" (2 Used Dual) (4 Used Triple), Lock Washer; 1/2", (Sub For A590912), Washer; 1/2", Conventional Units, Washer; 1/2" Not Illustrated, Washer; X 1/2", Washer; 12mm, Washer; (B: For 390 Offset Mower) 1/2" 305mm (12''), Washer; M12, Washer; 1/2", (Roll-Gard), Washer; (E: 1.8 M (72 In.)(6 Ft.)) 1/2", Washer; 12.700 mm, Incld In 1, Washer; 1/2" (Sub For 12m7058), Washer; 1/2" (Use With Adjustable Sieve), Washer; 1/2", (Nla), Washer; 1/2", (Rc And St), Washer; 1/2", (Afd - No Longer Required), Washer; 1/2" (A), Lock Washer, Washer; 1/2" (2 Used, Regular; 3 Used, Special), Washer; (A) 1/2", Washer; 1/2, Washer; (A: Serial No For 360 ( -00***82), 370 ( -00***93) And 390 ( -00***80)) 1/2", Washer; 1/2" (Adjustable Sieve), Washer; 1/2" (Rigid), Washer; 1/2", (Use With Roll-Gard), Washer; 1/2", (Sidehill), Washer; (A: ( -Xxxxxx) 8560-00***29; 8760-00***29; 8960-00***35) 1/2", Washer; (A) (C) (D) 1/2", Lock Washer; 1/2", Washer; 1/2", Runner Opener, Washer; (B: 2.4 M (96 In.)(8 Ft.)) 1/2", Washer; 1/2" 7 Ft., Washer; (A: Serial No For 360 (00***00- ), 370 (00***00- ) And 390 (00***00- )) 1/2", Washer; 1/2" Lh Strap, Washer; 1/2", 10 Hitch, Washer; 1/2", (Ea-G, Ge-01), Washer; 1/2" Incld In 24, Washer; (A: Use With Oversize Tires 30.5l-32 R-2 Single 24.5 -32 R-2 Dual (Narrow Spaced)) (B: Use With Oversize Tires 24.5-32 R-1 And R-2 Dual (Wide Spaced) 20.8 -38 R-2 Dual) 1/2", Washer; (Sub For R115050), Washer; 1/2" 6 Ft., Washer; 1/2" (Sub Ah84213), Washer; 1/2" (Sub For A590912), Washer; 1/2", For 10' And 12' Harrows, Washer; 1/2", (Sub For R30403), Washer; 1/2", (Use With M76852 Plate), Washer; (B) 1/2" W/O 11, Washer; 1/2", For 850 And 870, Washer; 1/2" (6359tr), Washer; 1/2", (Manual Steering), Washer; 1/2" Incld In 8, Washer; 1/2" (Flexible), Washer; 1/1", Washer; (C) 1/2", Washer; 1/2" (Use With P54727 And P54726), Washer; (A) (D) 1/2", Washer; (D: ( -Xxxxxx) Tractor Serial No. 4650-01***92; 4850-00***25) 1/2", Washer; 1/2" (Sb84b), Washer; (E: Use With Ar78538 Or Ty6701) 1/2", Washer; 1/2" 9 Ft., Washer; 1/2" (Sb78b), Washer; 1/2", For 15'3" Harrow, Washer; (C: Not Required) 1/2", Washer; 1/2", (Use With Es10785), Lock Washer; (Sub For Ffsb106424), Washer; 1/2" (3 Used, Regular; 3 Used, Special), Washer; 1/2", (Less Selective Control), Washer; 1/2" Already On Machine, Washer; 1/2", (B), Washer; 1/2" (Use With Ah96091 Or Ah171845), Washer; (D), Washer; 1/2", (See Front Idler Support Plates), Washer; (E) 1/2", Lock Washer; 1/2", (Sub For Ffsb107139), Washer; 1/2" Mount, Motor, Washer; 1/2" (Sb60b), Washer; 1/2" Ar, Washer; 1/2" (C) (D), Washer; (B: Items Included In Ae42001) 1/2", Washer; 1/2", (1253a), Washer; 1/2" (Sb60), Washer; 1/2", For 760 And 790, Washer; (D) 1/2", Washer; 1/2", (Sub For Ch13085), Washer; 1/2" (Cb01487619), Washer; 1/2" (Sb72b), Washer; 1/2" (Sb72), Washer, Washer; 1/2" (Lh Coupler), Washer; 1/2", For 790, 850, And 870, Washer; 1/2" (Dual), Washer; (D: Use With Ar78538 And Ty6701) 1/2", Spring Washer; (Sub For A590912), Washer; 1/2", Use With Fluted Coulter, Washer; 1/2" (Sb84), Washer; 1/2", (Not Used With Roller Adjuster), Washer; 1/2", (5 Used L.H.) (5 Used R.H.), Washer; 12 mm, Washer; 1/2", (540rpm), Washer; 1/2" (Use With 03h1439), Washer; 1/2" (Sub For 43***85), Washer; 1/2" (Sub For P3629h), Washer; 12.700 mm (1/2") (1253a), Washer; 1/2", (854a), Washer; 1/2", (Use With 19m8231), Washer; 1/2", (Disk Covers Only), Washer; 1/2" 1/2", Washer; 1/2", (Gn-01), Washer; 1/2", 730 Tractor, Washer; 1/2" (Into Header With Keyed Hub), Washer; (A: Remote Cylinder (4 Used)) 1/2", Washer; 1/2", (2 Used, A) (4 Used, B), Washer; 1/2", L.H., Washer; 1/2" (Use With 14m7275), Washer; 1/2", (Kit An193804), Washer; (B) (C) 1/2", Washer; 12.700 mm, Lock Washer; 1/2", (Sub For Ffsb108085), Washer; 1/2" 12mm, Washer; 1/2" (R), Washer; (D: 3 M (120 In.)(10 Ft.)) 1/2", Washer; (B: For 390 Offset Mower) 1/2", Washer; (Sub For A590912), Washer; (A: 2.1 M (84 In.)(7 Ft.)) 1/2", Washer; 12.700 mm, Already On Machine, Washer; (A: Not Required) 1/2", Washer; 1/2" 10 Ft., Washer; 1/2" (For Wheel With Solid Tire), Washer; 1/2", (16" Wheel), Washer; 1/2", (Ty2036)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Subframe Assembly And Miscellaneous Parts [B13]
14***41Nut; (A: Use With Scv Setup Panel (Without Cab)) M14, Nut; (A) M14, Nut; M14, Nut; Ar, 14 mm, Nut; (A) 14mm, Nut; (A: Cab/Isolated Open Operator Station: Sn -42***00) M14, Nut; (A) (B) M14, Nut; M14, (Sub For Ch12041), Nut; M14, Nut; M14, (Sub For J950014), Nut; M14 (Sub For 14m7054), Nut; (B) M14, Nut; 14 mm (Sub For 14m7054), Nut; 14mm, Nut; M14, (Sub For Ffsb108115 And J950014), Nut; 14 mm, Nut; M14, (Sub For Ffsb108115), Nut; (A: Used In High Clearance Tractors Too) M14, Nut; (Sub For Ffsb108115), Nut; M14 (A), Nut; M14 Sub For J950014, Nut; (Sub For J950014), Nut; M14 (Sub For J950014)1
19***53Cap Screw; 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; (A) (B) 3/4" X 2-1/2" (Hs, Sae 8), Cap Screw; 3/4" X 2-1/2", Cap Screw; 3/4" X 2-1/2", With Axle Extensions, Cap Screw; 3/4" X 2-1/2", Without Axle Extensions8
19***32Bolt; M14 X 35 (Hs, Head Marked 10.9), Bolt; M14 X 35 (Hs=10.9), Cap Screw; (Sub For J901435), Cap Screw; M14 X 35, (Sub For Ffsb109219), Bolt; M14 X 35, (Sub For Ch12029), Bolt; M14 X 35, (Also Order 12m7068), Bolt; M14x35, Bolt; (Sub For J901435), Bolt; M14 X 35 (Sub For J901435), Bolt; (10.9), Bolt; M14x35 (10.9), Bolt; (A: Used In High Clearance Tractors Too) M14 X 35 (Hs, Head Marked 10.9), Bolt; M14 X 35 (W/ Washer), Bolt; (A) M14 X 35, Cap Screw; M14 X 35, (Sub For J901435), Cap Screw; (Sub For Ffsb109219), Bolt; M14 X 35, (Sub For Mg280854 Or 19m7392), Bolt; M14 X 35 Hs=10.9, Bolt; M14 X 35, Bolt; M14 X 35 (10.9), Bolt; (A) (B) M14 X 35 (Hs, Head Marked 10.9), Bolt, Bolt; M14 X 35 (Sub For Er020967 Appl), Cap Screw; (Sub For J971435), Bolt; (A) M14 X 35 (Hs, Head Marked 10.9), Cap Screw; M14 X 35, Bolt; M14 X 35 (Sub For J921435)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Swing Cylinder [B21]
AM***36Seal; (A: Bucket), Seal; Rod, Seal1
AM***38Seal Kit, Seal Kit; (Includes Parts Marked (A)), Seal Kit; Includes Parts Marked (A), Seal Kit; (A: Bucket)1
H2***23Lock Nut; (Sub For Pt10406), Lock Nut, Lock Nut; (Use With H96169), Lock Nut; 22.225 mm, Lock Nut; (A) (Sub For Pt10406), Lock Nut; (Sub For W40014), Lock Nut; 22.225 mm (Sub For Pt10406), Lock Nut; 7/8", Lock Nut; (Sub For T42704 Or W40014)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Valve Seal Kit (For All Valve Sections) [C10]
AM***15Kit; (C) (911) Includes Parts Marked (B), Kit; (A), O-Ring, Kit; (Includes Parts Marked (B)), Kit; (Includes Parts Marked (A)), Kit; (C) (Includes Parts Marked (B)), Kit, Kit; Includes Parts Marked (B), Kit; (C) (900) Includes Parts Marked (B), Kit; (C) Includes Parts Marked (B), Kit; (A) (Includes Parts Marked (B)), Kit; (A) O-Ring, Kit; Seal, Kit; Includes Parts Marked (A), Kit; (D) (Includes Parts Marked (B)), Kit; (F) (Includes Parts Marked (D)), Kit; (D) (Includes Parts Marked (C)), Kit; (A), Kit; (C) Seal Includes Parts Marked (B), Kit; (E) (Includes Parts Marked (D)), Kit; (A) Seal, Kit; Seal, (Sub For (2) Pt8142 And (2) Pt8143), Kit; (A) Includes Parts Marked (B)6
AM***74Seal Kit; (Includes Parts Marked (C)), Seal Kit; Includes Parts Marked (D), Seal Kit, Seal Kit; (Includes Parts Marked (B)), Seal Kit; (Includes Parts Marked (D)), Seal Kit; (Contains (2) T104785 And (2) T57246), Seal Kit; Includes Parts Marked (E)6
H6***83O-Ring; (K: At160684 Relief Valve Seal Kit (Sub For At156765)), O-Ring; (K1), O-Ring; (K: Kit At160684 Relief Valve Seal Kit (Sub For At156765)), O-Ring; Kit Ah96662, O-Ring; 0.551" X 0.070", O-Ring; (A) (D), O-Ring; (C), O-Ring; (Sub For Z101560), O-Ring; (A), O-Ring, O-Ring; 13.995 X 1.778 mm (0.551" X 0.070"), O-Ring; (B), O-Ring; (For Al78298), O-Ring; (Kit Ah213826 Or Ah129423), O-Ring; (Kit Ah213826 Or Ah129422), O-Ring; (Kit Ah213826), O-Ring; (K: At160684 Kit, Relief Valve Seal (Sub For At140087, At135677 And At156765)), O-Ring; (K), O-Ring; (K: Kit At160684 Relief Valve Seal Kit), O-Ring; (Kit Ah90687)2
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Valve Section (Boom And Dipperstick) [C04]
AM***15Kit; (C) (911) Includes Parts Marked (B), Kit; (A), O-Ring, Kit; (Includes Parts Marked (B)), Kit; (Includes Parts Marked (A)), Kit; (C) (Includes Parts Marked (B)), Kit, Kit; Includes Parts Marked (B), Kit; (C) (900) Includes Parts Marked (B), Kit; (C) Includes Parts Marked (B), Kit; (A) (Includes Parts Marked (B)), Kit; (A) O-Ring, Kit; Seal, Kit; Includes Parts Marked (A), Kit; (D) (Includes Parts Marked (B)), Kit; (F) (Includes Parts Marked (D)), Kit; (D) (Includes Parts Marked (C)), Kit; (A), Kit; (C) Seal Includes Parts Marked (B), Kit; (E) (Includes Parts Marked (D)), Kit; (A) Seal, Kit; Seal, (Sub For (2) Pt8142 And (2) Pt8143), Kit; (A) Includes Parts Marked (B)1
AM***74Seal Kit; (Includes Parts Marked (C)), Seal Kit; Includes Parts Marked (D), Seal Kit, Seal Kit; (Includes Parts Marked (B)), Seal Kit; (Includes Parts Marked (D)), Seal Kit; (Contains (2) T104785 And (2) T57246), Seal Kit; Includes Parts Marked (E)1
AM***41Section; Boom1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Valve Section (Bucket) [C08]
21***05Screw; 1/4" X 1", Mach., Screw; 1/4" X 1", Screw; 1/4" X 1", Steel Base, Screw; (G) 1/4" X 1"2
AM***15Kit; (C) (911) Includes Parts Marked (B), Kit; (A), O-Ring, Kit; (Includes Parts Marked (B)), Kit; (Includes Parts Marked (A)), Kit; (C) (Includes Parts Marked (B)), Kit, Kit; Includes Parts Marked (B), Kit; (C) (900) Includes Parts Marked (B), Kit; (C) Includes Parts Marked (B), Kit; (A) (Includes Parts Marked (B)), Kit; (A) O-Ring, Kit; Seal, Kit; Includes Parts Marked (A), Kit; (D) (Includes Parts Marked (B)), Kit; (F) (Includes Parts Marked (D)), Kit; (D) (Includes Parts Marked (C)), Kit; (A), Kit; (C) Seal Includes Parts Marked (B), Kit; (E) (Includes Parts Marked (D)), Kit; (A) Seal, Kit; Seal, (Sub For (2) Pt8142 And (2) Pt8143), Kit; (A) Includes Parts Marked (B)1
AM***74Seal Kit; (Includes Parts Marked (C)), Seal Kit; Includes Parts Marked (D), Seal Kit, Seal Kit; (Includes Parts Marked (B)), Seal Kit; (Includes Parts Marked (D)), Seal Kit; (Contains (2) T104785 And (2) T57246), Seal Kit; Includes Parts Marked (E)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Valve Section (Stabilizer) [C02]
11***81Cotter Pin; (B) 2.500 X 20 mm, Cotter Pin; 2.500 X 20 mm (A) (B), Cotter Pin; (A: 40 Ft And 42 Ft Machines) (B: 30 Ft And 35 Ft Or 36 Ft Machines) 2.500 X 20 mm, Cotter Pin; 2.500 X 20 mm (Use With Ah201398), Cotter Pin; 2.500 X 20 mm, 3/32" X 0.75", Cotter Pin; 2.500 X 20 mm, Cotter Pin; 0.098" X 0.787", (Hc), Cotter Pin; 2.500 X 20 mm (0.098" X 0.787"), Cotter Pin, Cotter Pin; 0.098" X 0.787", (Nla), Cotter Pin; 2,5x20mm, Cotter Pin; 2.500 X 20 mm, (Sub For 11h206), Cotter Pin; (A: ( -Xxxxxx) 7600-00***85; 7700-00***79; 7800-00***49) 2.500 X 20 mm, Cotter Pin; 0.098" X 0.787", (H), Cotter Pin; (A: 3201 Panel Gages Sp Cntrl) (B: 3202 Panel Gages Sp Cntrl) (C: 3208 Panel Gages Sp Cntrl) 2.500 X 20 mm, Cotter Pin; (K: At100208 Linkage - No Longer Available (Includes At101913, At106687, C1067r, M84972, T100992,) 2.500 X 20 mm, Cotter Pin; 0.098" X 0.787", (Sub For 11h206), Cotter Pin; 2.500 X 20 mm, Cotter Pin; (A) 2.500 X 20 mm, Cotter Pin; (G) 2.500 X 20 mm, Cotter Pin; 2.500 X 20 mm (Sub For 11h206), Cotter Pin, Cotter Pin; 0.098" X 0.787", (1 Used Gasoline) (2 Used Diesel), Cotter Pin; 0.098" X 0.787", (Dual Hydraulic), Cotter Pin; (A) (C) 0.098" X 0.787", Cotter Pin; 2.500 X 20 mm Not Illustrated, Cotter Pin; (A: 9901 With Temperature And Oil Pressure Gages) (B: 9902 For Enclosure Field) 2.500 X 20 mm, Cotter Pin; 0.098" X 0.787"1
21***05Screw; 1/4" X 1", Mach., Screw; 1/4" X 1", Screw; 1/4" X 1", Steel Base, Screw; (G) 1/4" X 1"2
AM***15Kit; (C) (911) Includes Parts Marked (B), Kit; (A), O-Ring, Kit; (Includes Parts Marked (B)), Kit; (Includes Parts Marked (A)), Kit; (C) (Includes Parts Marked (B)), Kit, Kit; Includes Parts Marked (B), Kit; (C) (900) Includes Parts Marked (B), Kit; (C) Includes Parts Marked (B), Kit; (A) (Includes Parts Marked (B)), Kit; (A) O-Ring, Kit; Seal, Kit; Includes Parts Marked (A), Kit; (D) (Includes Parts Marked (B)), Kit; (F) (Includes Parts Marked (D)), Kit; (D) (Includes Parts Marked (C)), Kit; (A), Kit; (C) Seal Includes Parts Marked (B), Kit; (E) (Includes Parts Marked (D)), Kit; (A) Seal, Kit; Seal, (Sub For (2) Pt8142 And (2) Pt8143), Kit; (A) Includes Parts Marked (B)1
See all parts with full part numbers in Heavy Parts AI →
John Deere : 49 - Backhoe : 20 49 Backhoe : Valve Section (Swing) [C06]
AM***15Kit; (C) (911) Includes Parts Marked (B), Kit; (A), O-Ring, Kit; (Includes Parts Marked (B)), Kit; (Includes Parts Marked (A)), Kit; (C) (Includes Parts Marked (B)), Kit, Kit; Includes Parts Marked (B), Kit; (C) (900) Includes Parts Marked (B), Kit; (C) Includes Parts Marked (B), Kit; (A) (Includes Parts Marked (B)), Kit; (A) O-Ring, Kit; Seal, Kit; Includes Parts Marked (A), Kit; (D) (Includes Parts Marked (B)), Kit; (F) (Includes Parts Marked (D)), Kit; (D) (Includes Parts Marked (C)), Kit; (A), Kit; (C) Seal Includes Parts Marked (B), Kit; (E) (Includes Parts Marked (D)), Kit; (A) Seal, Kit; Seal, (Sub For (2) Pt8142 And (2) Pt8143), Kit; (A) Includes Parts Marked (B)1
AM***74Seal Kit; (Includes Parts Marked (C)), Seal Kit; Includes Parts Marked (D), Seal Kit, Seal Kit; (Includes Parts Marked (B)), Seal Kit; (Includes Parts Marked (D)), Seal Kit; (Contains (2) T104785 And (2) T57246), Seal Kit; Includes Parts Marked (E)1
AT***83Seal Kit; Retainer (Bucket And Swing Valves) (Sub For At107871), Seal Kit; (Bucket And Swing Valves) (Sub For At107871), Seal Kit; (Sub For Pt14446), Seal Kit, Seal Kit; Spool Seal, Seal Kit; Spool Seal (Sub For At107871), Seal Kit; Retainer (Includes Parts Marked (A)) (Bucket And Swing Valves) (Sub For At107871), Seal Kit; Retainer (Bucket Valves), Seal Kit; Retainer (Swing Valve) (Sub For At107871), Seal Kit; Spool Seal, (Sub For At107871)1
See all parts with full part numbers in Heavy Parts AI →

Need a specific 49 - BACKHOE part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the appSource or supply its parts

Post a parts request and compare supplier quotes.